diff --git linux-libre-6.15-gnu/.clang-format linux-libre-6.16-gnu/.clang-format
index 86c20ee744de..48405c54ef27 100644
--- linux-libre-6.15-gnu/.clang-format
+++ linux-libre-6.16-gnu/.clang-format
@@ -722,6 +722,13 @@ ForEachMacros:
   - 'v4l2_m2m_for_each_src_buf'
   - 'v4l2_m2m_for_each_src_buf_safe'
   - 'virtio_device_for_each_vq'
+  - 'vkms_config_for_each_connector'
+  - 'vkms_config_for_each_crtc'
+  - 'vkms_config_for_each_encoder'
+  - 'vkms_config_for_each_plane'
+  - 'vkms_config_connector_for_each_possible_encoder'
+  - 'vkms_config_encoder_for_each_possible_crtc'
+  - 'vkms_config_plane_for_each_possible_crtc'
   - 'while_for_each_ftrace_op'
   - 'workloads__for_each'
   - 'xa_for_each'
diff --git linux-libre-6.15-gnu/.gitignore linux-libre-6.16-gnu/.gitignore
index f2f63e47fb88..bf5ee6e01cd4 100644
--- linux-libre-6.15-gnu/.gitignore
+++ linux-libre-6.16-gnu/.gitignore
@@ -40,6 +40,7 @@
 *.o
 *.o.*
 *.patch
+*.pyc
 *.rmeta
 *.rpm
 *.rsi
diff --git linux-libre-6.15-gnu/.mailmap linux-libre-6.16-gnu/.mailmap
index a885e2eefc69..4bb3a7f253b9 100644
--- linux-libre-6.15-gnu/.mailmap
+++ linux-libre-6.16-gnu/.mailmap
@@ -21,7 +21,8 @@ Adam Radford <aradford@gmail.com>
 Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
 Adrian Bunk <bunk@stusta.de>
 Ajay Kaher <ajay.kaher@broadcom.com> <akaher@vmware.com>
-Akhil P Oommen <quic_akhilpo@quicinc.com> <akhilpo@codeaurora.org>
+Akhil P Oommen <akhilpo@oss.qualcomm.com> <akhilpo@codeaurora.org>
+Akhil P Oommen <akhilpo@oss.qualcomm.com> <quic_akhilpo@quicinc.com>
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Aleksandar Markovic <aleksandar.markovic@mips.com> <aleksandar.markovic@imgtec.com>
@@ -106,7 +107,8 @@ Asahi Lina <lina+kernel@asahilina.net> <lina@asahilina.net>
 Ashok Raj Nagarajan <quic_arnagara@quicinc.com> <arnagara@codeaurora.org>
 Ashwin Chaugule <quic_ashwinc@quicinc.com> <ashwinc@codeaurora.org>
 Asutosh Das <quic_asutoshd@quicinc.com> <asutoshd@codeaurora.org>
-Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
+Atish Patra <atish.patra@linux.dev> <atishp@atishpatra.org>
+Atish Patra <atish.patra@linux.dev> <atish.patra@wdc.com>
 Avaneesh Kumar Dwivedi <quic_akdwived@quicinc.com> <akdwived@codeaurora.org>
 Axel Dyks <xl@xlsigned.net>
 Axel Lin <axel.lin@gmail.com>
@@ -135,6 +137,7 @@ Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
 Benjamin Poirier <benjamin.poirier@gmail.com> <bpoirier@suse.de>
 Benjamin Tissoires <bentiss@kernel.org> <benjamin.tissoires@gmail.com>
 Benjamin Tissoires <bentiss@kernel.org> <benjamin.tissoires@redhat.com>
+Benno Lossin <lossin@kernel.org> <benno.lossin@proton.me>
 Bingwu Zhang <xtex@aosc.io> <xtexchooser@duck.com>
 Bingwu Zhang <xtex@aosc.io> <xtex@xtexx.eu.org>
 Bjorn Andersson <andersson@kernel.org> <bjorn@kryo.se>
@@ -155,6 +158,9 @@ Brian King <brking@us.ibm.com>
 Brian Silverman <bsilver16384@gmail.com> <brian.silverman@bluerivertech.com>
 Bryan Tan <bryan-bt.tan@broadcom.com> <bryantan@vmware.com>
 Cai Huoqing <cai.huoqing@linux.dev> <caihuoqing@baidu.com>
+Casey Connolly <casey.connolly@linaro.org> <caleb.connolly@linaro.org>
+Casey Connolly <casey.connolly@linaro.org> <caleb@connolly.tech>
+Casey Connolly <casey.connolly@linaro.org> <caleb@postmarketos.org>
 Can Guo <quic_cang@quicinc.com> <cang@codeaurora.org>
 Carl Huang <quic_cjhuang@quicinc.com> <cjhuang@codeaurora.org>
 Carlos Bilbao <carlos.bilbao@kernel.org> <carlos.bilbao@amd.com>
@@ -191,6 +197,7 @@ Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
 Daniel Borkmann <daniel@iogearbox.net> <dborkmann@redhat.com>
 Daniel Borkmann <daniel@iogearbox.net> <dborkman@redhat.com>
 Daniel Borkmann <daniel@iogearbox.net> <dxchgb@gmail.com>
+Danilo Krummrich <dakr@kernel.org> <dakr@redhat.com>
 David Brownell <david-b@pacbell.net>
 David Collins <quic_collinsd@quicinc.com> <collinsd@codeaurora.org>
 David Heidelberg <david@ixit.cz> <d.okias@gmail.com>
@@ -216,6 +223,8 @@ Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
 Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
+Drew Fustini <fustini@kernel.org> <drew@pdp7.com>
+<duje@dujemihanovic.xyz> <duje.mihanovic@skole.hr>
 Ed L. Cashin <ecashin@coraid.com>
 Elliot Berman <quic_eberman@quicinc.com> <eberman@codeaurora.org>
 Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
@@ -276,6 +285,7 @@ Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> <hamza.mahfooz@amd.com>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>
+Hans de Goede <hansg@kernel.org> <hdegoede@redhat.com>
 Hans Verkuil <hverkuil@xs4all.nl> <hansverk@cisco.com>
 Hans Verkuil <hverkuil@xs4all.nl> <hverkuil-cisco@xs4all.nl>
 Harry Yoo <harry.yoo@oracle.com> <42.hyeyoo@gmail.com>
@@ -406,6 +416,7 @@ Kenneth W Chen <kenneth.w.chen@intel.com>
 Kenneth Westfield <quic_kwestfie@quicinc.com> <kwestfie@codeaurora.org>
 Kiran Gunda <quic_kgunda@quicinc.com> <kgunda@codeaurora.org>
 Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
+Kirill A. Shutemov <kas@kernel.org> <kirill.shutemov@linux.intel.com>
 Kishon Vijay Abraham I <kishon@kernel.org> <kishon@ti.com>
 Konrad Dybcio <konradybcio@kernel.org> <konrad.dybcio@linaro.org>
 Konrad Dybcio <konradybcio@kernel.org> <konrad.dybcio@somainline.org>
@@ -416,8 +427,13 @@ Krishna Manikandan <quic_mkrishn@quicinc.com> <mkrishn@codeaurora.org>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <krzysztof.kozlowski@canonical.com>
+Krzysztof Wilczyński <kwilczynski@kernel.org> <krzysztof.wilczynski@linux.com>
+Krzysztof Wilczyński <kwilczynski@kernel.org> <kw@linux.com>
 Kshitiz Godara <quic_kgodara@quicinc.com> <kgodara@codeaurora.org>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+Kuniyuki Iwashima <kuniyu@google.com> <kuniyu@amazon.com>
+Kuniyuki Iwashima <kuniyu@google.com> <kuniyu@amazon.co.jp>
+Kuniyuki Iwashima <kuniyu@google.com> <kuni1840@gmail.com>
 Kuogee Hsieh <quic_khsieh@quicinc.com> <khsieh@codeaurora.org>
 Lee Jones <lee@kernel.org> <joneslee@google.com>
 Lee Jones <lee@kernel.org> <lee.jones@canonical.com>
@@ -458,6 +474,7 @@ Maheshwar Ajja <quic_majja@quicinc.com> <majja@codeaurora.org>
 Malathi Gottam <quic_mgottam@quicinc.com> <mgottam@codeaurora.org>
 Manikanta Pubbisetty <quic_mpubbise@quicinc.com> <mpubbise@codeaurora.org>
 Manivannan Sadhasivam <mani@kernel.org> <manivannanece23@gmail.com>
+Manivannan Sadhasivam <mani@kernel.org> <manivannan.sadhasivam@linaro.org>
 Manoj Basapathi <quic_manojbm@quicinc.com> <manojbm@codeaurora.org>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
@@ -511,6 +528,7 @@ Mayuresh Janorkar <mayur@ti.com>
 Md Sadre Alam <quic_mdalam@quicinc.com> <mdalam@codeaurora.org>
 Miaoqing Pan <quic_miaoqing@quicinc.com> <miaoqing@codeaurora.org>
 Michael Buesch <m@bues.ch>
+Michael Riesch <michael.riesch@collabora.com> <michael.riesch@wolfvision.net>
 Michal Simek <michal.simek@amd.com> <michal.simek@xilinx.com>
 Michel Dänzer <michel@tungstengraphics.com>
 Michel Lespinasse <michel@lespinasse.org>
@@ -545,6 +563,8 @@ Naveen N Rao <naveen@kernel.org> <naveen.n.rao@linux.vnet.ibm.com>
 Neeraj Upadhyay <neeraj.upadhyay@kernel.org> <quic_neeraju@quicinc.com>
 Neeraj Upadhyay <neeraj.upadhyay@kernel.org> <neeraju@codeaurora.org>
 Neil Armstrong <neil.armstrong@linaro.org> <narmstrong@baylibre.com>
+NeilBrown <neil@brown.name> <neilb@suse.de>
+NeilBrown <neil@brown.name> <neilb@cse.unsw.edu.au>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Nicholas Piggin <npiggin@gmail.com> <npiggen@suse.de>
 Nicholas Piggin <npiggin@gmail.com> <npiggin@kernel.dk>
@@ -590,6 +610,12 @@ Paul Mackerras <paulus@ozlabs.org> <paulus@samba.org>
 Paul Mackerras <paulus@ozlabs.org> <paulus@au1.ibm.com>
 Paul Moore <paul@paul-moore.com> <paul.moore@hp.com>
 Paul Moore <paul@paul-moore.com> <pmoore@redhat.com>
+Paulo Alcantara <pc@manguebit.org> <pcacjr@zytor.com>
+Paulo Alcantara <pc@manguebit.org> <paulo@paulo.ac>
+Paulo Alcantara <pc@manguebit.org> <pc@cjr.nz>
+Paulo Alcantara <pc@manguebit.org> <palcantara@suse.de>
+Paulo Alcantara <pc@manguebit.org> <palcantara@suse.com>
+Paulo Alcantara <pc@manguebit.org> <pc@manguebit.com>
 Pavankumar Kondeti <quic_pkondeti@quicinc.com> <pkondeti@codeaurora.org>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter.oruba@amd.com>
@@ -630,6 +656,8 @@ Richard Genoud <richard.genoud@bootlin.com> <richard.genoud@gmail.com>
 Richard Leitner <richard.leitner@linux.dev> <dev@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <me@g0hl1n.net>
 Richard Leitner <richard.leitner@linux.dev> <richard.leitner@skidata.com>
+Rob Clark <robin.clark@oss.qualcomm.com> <robdclark@chromium.org>
+Rob Clark <robin.clark@oss.qualcomm.com> <robdclark@gmail.com>
 Robert Foss <rfoss@kernel.org> <robert.foss@linaro.org>
 Rocky Liao <quic_rjliao@quicinc.com> <rjliao@codeaurora.org>
 Rodrigo Siqueira <siqueira@igalia.com> <rodrigosiqueiramelo@gmail.com>
@@ -666,11 +694,16 @@ Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
 Senthilkumar N L <quic_snlakshm@quicinc.com> <snlakshm@codeaurora.org>
 Serge Hallyn <sergeh@kernel.org> <serge.hallyn@canonical.com>
 Serge Hallyn <sergeh@kernel.org> <serue@us.ibm.com>
+Sergey Senozhatsky <senozhatsky@chromium.org> <sergey.senozhatsky.work@gmail.com>
+Sergey Senozhatsky <senozhatsky@chromium.org> <sergey.senozhatsky@gmail.com>
+Sergey Senozhatsky <senozhatsky@chromium.org> <sergey.senozhatsky@mail.by>
+Sergey Senozhatsky <senozhatsky@chromium.org> <senozhatsky@google.com>
 Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
 Shakeel Butt <shakeel.butt@linux.dev> <shakeelb@google.com>
-Shannon Nelson <shannon.nelson@amd.com> <snelson@pensando.io>
-Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@intel.com>
-Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@oracle.com>
+Shannon Nelson <sln@onemain.com> <shannon.nelson@amd.com>
+Shannon Nelson <sln@onemain.com> <snelson@pensando.io>
+Shannon Nelson <sln@onemain.com> <shannon.nelson@intel.com>
+Shannon Nelson <sln@onemain.com> <shannon.nelson@oracle.com>
 Sharath Chandra Vurukala <quic_sharathv@quicinc.com> <sharathv@codeaurora.org>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
@@ -699,6 +732,7 @@ Srinivas Ramana <quic_sramana@quicinc.com> <sramana@codeaurora.org>
 Sriram R <quic_srirrama@quicinc.com> <srirrama@codeaurora.org>
 Sriram Yagnaraman <sriram.yagnaraman@ericsson.com> <sriram.yagnaraman@est.tech>
 Stanislav Fomichev <sdf@fomichev.me> <sdf@google.com>
+Stanislav Fomichev <sdf@fomichev.me> <stfomichev@gmail.com>
 Stefan Wahren <wahrenst@gmx.net> <stefan.wahren@i2se.com>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <stephen@networkplumber.org> <shemminger@linux-foundation.org>
@@ -722,6 +756,7 @@ Sven Eckelmann <sven@narfation.org> <sven.eckelmann@gmx.de>
 Sven Eckelmann <sven@narfation.org> <sven.eckelmann@open-mesh.com>
 Sven Eckelmann <sven@narfation.org> <sven.eckelmann@openmesh.com>
 Sven Eckelmann <sven@narfation.org> <sven@open-mesh.com>
+Sven Peter <sven@kernel.org> <sven@svenpeter.dev>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> <tamizhr@codeaurora.org>
 Taniya Das <quic_tdas@quicinc.com> <tdas@codeaurora.org>
@@ -802,3 +837,6 @@ Yosry Ahmed <yosry.ahmed@linux.dev> <yosryahmed@google.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Zack Rusin <zack.rusin@broadcom.com> <zackr@vmware.com>
 Zhu Yanjun <zyjzyj2000@gmail.com> <yanjunz@nvidia.com>
+Zijun Hu <zijun.hu@oss.qualcomm.com> <quic_zijuhu@quicinc.com>
+Zijun Hu <zijun.hu@oss.qualcomm.com> <zijuhu@codeaurora.org>
+Zijun Hu <zijun_hu@htc.com>
diff --git linux-libre-6.15-gnu/.pylintrc linux-libre-6.16-gnu/.pylintrc
new file mode 100644
index 000000000000..30b8ae1659f8
--- /dev/null
+++ linux-libre-6.16-gnu/.pylintrc
@@ -0,0 +1,2 @@
+[MASTER]
+init-hook='import sys; sys.path += ["scripts/lib/kdoc", "scripts/lib/abi"]'
diff --git linux-libre-6.15-gnu/CREDITS linux-libre-6.16-gnu/CREDITS
index f74d230992d6..cf2a53efaf4c 100644
--- linux-libre-6.15-gnu/CREDITS
+++ linux-libre-6.16-gnu/CREDITS
@@ -1397,6 +1397,10 @@ N: Thomas Gleixner
 E: tglx@linutronix.de
 D: NAND flash hardware support, JFFS2 on NAND flash
 
+N: Jérôme Glisse
+E: jglisse@redhat.com
+D: HMM - Heterogeneous Memory Management
+
 N: Richard E. Gooch
 E: rgooch@atnf.csiro.au
 D: parent process death signal to children
@@ -2336,7 +2340,7 @@ D: Author of the dialog utility, foundation
 D: for Menuconfig's lxdialog.
 
 N: Christoph Lameter
-E: christoph@lameter.com
+E: cl@gentwo.org
 D: Digiboard PC/Xe and PC/Xi, Digiboard EPCA
 D: NUMA support, Slab allocators, Page migration
 D: Scalability, Time subsystem
@@ -2981,6 +2985,11 @@ S: 521 Pleasant Valley Road
 S: Potsdam, New York 13676
 S: USA
 
+N: Shannon Nelson
+E: sln@onemain.com
+D: Worked on several network drivers including
+D: ixgbe, i40e, ionic, pds_core, pds_vdpa, pds_fwctl
+
 N: Dave Neuer
 E: dave.neuer@pobox.com
 D: Helped implement support for Compaq's H31xx series iPAQs
diff --git linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-block linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-block
index 11545c9e2e93..4ba771b56b3b 100644
--- linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-block
+++ linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-block
@@ -547,6 +547,21 @@ Description:
 		[RO] Maximum size in bytes of a single element in a DMA
 		scatter/gather list.
 
+What:		/sys/block/<disk>/queue/max_write_streams
+Date:		November 2024
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum number of write streams supported, 0 if not
+		supported. If supported, valid values are 1 through
+		max_write_streams, inclusive.
+
+What:		/sys/block/<disk>/queue/write_stream_granularity
+Date:		November 2024
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Granularity of a write stream in bytes.  The granularity
+		of a write stream is the size that should be discarded or
+		overwritten together to avoid write amplification in the device.
 
 What:		/sys/block/<disk>/queue/max_segments
 Date:		March 2010
diff --git linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-class-backlight linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-class-backlight
index 6102d6bebdf9..40b8c46b95b2 100644
--- linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-class-backlight
+++ linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-class-backlight
@@ -26,7 +26,12 @@ Date:		March 2006
 KernelVersion:	2.6.17
 Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
-		Show the actual brightness by querying the hardware.
+		Show the actual brightness by querying the hardware. Due
+		to implementation differences in hardware this may not
+		match the value in 'brightness'. For example some hardware
+		may treat blanking differently or have custom power saving
+		features. Userspace should generally use the values in
+		'brightness' to make decisions.
 Users:		HAL
 
 What:		/sys/class/backlight/<backlight>/max_brightness
diff --git linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-driver-mlxreg-io linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 2cdfd09123da..f59461111221 100644
--- linux-libre-6.15-gnu/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ linux-libre-6.16-gnu/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -715,3 +715,101 @@ Description:	This file shows 1 in case the system reset happened due to the
 		switch board.
 
 		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/global_wp_request
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file when written 1 activates request to allow access to
+		the write protected flashes. Such request can be performed only
+		for system equipped with BMC (Board Management Controller),
+		which can grant access to protected flashes. In case BMC allows
+		access - it will respond with "global_wp_response". BMC decides
+		regarding time window of granted access. After granted window is
+		expired, BMC will change value back to 0.
+		Default value is 0.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/global_wp_response
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file, when set 1, indicates that access to protected
+		flashes have been granted to host CPU by BMC.
+		Default value is 0.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	When ASICs are getting overheated, system protection
+		hardware mechanism enforces system reboot. After system
+		reboot ASICs come up in locked state. To unlock ASICs,
+		this file should be written 1
+		Default value is 0.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/boot_progress
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files show the Data Process Unit board boot progress
+		state. Valid states are:
+		- 4 : OS starting.
+		- 5 : OS running.
+		- 6 : Low-Power Standby.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/dpu_id
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file shows hardware Id of Data Process Unit board.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_reload
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_dpu_thermal
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_from_main_board
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files expose the cause of the most recent reset of the Data
+		Processing Unit (DPU) board. The possible causes are:
+		- Power auxiliary outage or power reload.
+		- Thermal shutdown.
+		- Reset request from the main board.
+		Value 1 in file means this is reset cause, 0 - otherwise. Only one of
+		the above causes could be 1 at the same time, representing only last
+		reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/perst_rst
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/phy_rst
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/tpm_rst
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/usbphy_rst
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow to reset hardware components of Data Process
+		Unit board. Respectively PCI, Ethernet PHY, TPM and USB PHY
+		resets.
+		Default values for all the attributes is 1. Writing 0 will
+		cause reset of the related component.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/ufm_upgrade
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files show status of Unified Fabric Manager upgrade.
+		state. 0 - means upgrade is done, 1 - otherwise.
+
+		The file is read only.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/configfs-tsm linux-libre-6.16-gnu/Documentation/ABI/testing/configfs-tsm-report
similarity index 100%
rename from Documentation/ABI/testing/configfs-tsm
rename to Documentation/ABI/testing/configfs-tsm-report
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-alienware-wmi linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-alienware-wmi
new file mode 100644
index 000000000000..c7f525d6baac
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-alienware-wmi
@@ -0,0 +1,64 @@
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/system_description
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes the raw ``system_description`` number reported
+		by the WMAX device.
+
+		Only present on devices with the AWCC interface.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/hwmon_data
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes HWMON private data.
+
+		Includes fan sensor count, temperature sensor count, internal
+		fan IDs and internal temp IDs.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/pprof_data
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes Platform Profile private data.
+
+		Includes internal mapping to platform profiles and thermal
+		profile IDs.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/gpio_ctl/total_gpios
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		Total number of GPIO pins reported by the device.
+
+		RO
+
+What:		/sys/kernel/debug/alienware-wmi-<wmi_device_name>/gpio_ctl/pinX
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file controls GPIO pin X status.
+
+		See Documentation/wmi/devices/alienware-wmi.rst for details.
+
+		RW
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-pcie-ptm linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-pcie-ptm
new file mode 100644
index 000000000000..602d41363571
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-pcie-ptm
@@ -0,0 +1,70 @@
+What:		/sys/kernel/debug/pcie_ptm_*/local_clock
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM local clock in nanoseconds. Applicable for both Root
+		Complex and Endpoint controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/master_clock
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM master clock in nanoseconds. Applicable only for
+		Endpoint controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/t1
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM T1 timestamp in nanoseconds. Applicable only for
+		Endpoint controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/t2
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM T2 timestamp in nanoseconds. Applicable only for
+		Root Complex controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/t3
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM T3 timestamp in nanoseconds. Applicable only for
+		Root Complex controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/t4
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RO) PTM T4 timestamp in nanoseconds. Applicable only for
+		Endpoint controllers.
+
+What:		/sys/kernel/debug/pcie_ptm_*/context_update
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RW) Control the PTM context update mode. Applicable only for
+		Endpoint controllers.
+
+		Following values are supported:
+
+		* auto = PTM context auto update trigger for every 10ms
+
+		* manual = PTM context manual update. Writing 'manual' to this
+			   file triggers PTM context update (default)
+
+What:		/sys/kernel/debug/pcie_ptm_*/context_valid
+Date:		May 2025
+Contact:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+Description:
+		(RW) Control the PTM context validity (local clock timing).
+		Applicable only for Root Complex controllers. PTM context is
+		invalidated by hardware if the Root Complex enters low power
+		mode or changes link frequency.
+
+		Following values are supported:
+
+		* 0 = PTM context invalid (default)
+
+		* 1 = PTM context valid
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-scmi-raw linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-scmi-raw
index 97678cc9535c..5847b96b3896 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-scmi-raw
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-scmi-raw
@@ -31,6 +31,42 @@ Description:	SCMI Raw asynchronous message injection/snooping facility; write
 		(receiving an EOF at each message boundary).
 Users:		Debugging, any userspace test suite
 
+What:		/sys/kernel/debug/scmi/<n>/raw/message_poll
+Date:		June 2025
+KernelVersion:	6.16
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw message injection/snooping facility using polling mode;
+		write a complete SCMI command message (header included) in
+		little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n>, using polling mode on
+		the reception path. (if transport is polling capable)
+		Any subsequently received response can be read from this same
+		entry if it arrived within the configured timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/message_poll_async
+Date:		June 2025
+KernelVersion:	6.16
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw asynchronous message injection/snooping facility using
+		polling-mode; write a complete SCMI asynchronous command message
+		(header included) in little-endian binary format to have it sent
+		to the configured backend SCMI server for instance <n>, using
+		polling-mode on the reception path of the immediate part of the
+		asynchronous command. (if transport is polling capable)
+		Any subsequently received response can be read from this same
+		entry if it arrived within the configured timeout.
+		Any additional delayed response received afterwards can be read
+		from this same entry too if it arrived within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+Users:		Debugging, any userspace test suite
+
 What:		/sys/kernel/debug/scmi/<n>/raw/errors
 Date:		March 2023
 KernelVersion:	6.3
@@ -115,3 +151,58 @@ Description:	SCMI Raw asynchronous message injection/snooping facility; write
 		exist only if the transport is configured to have more than
 		one default channel.
 Users:		Debugging, any userspace test suite
+
+
+What:		/sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_poll
+Date:		June 2025
+KernelVersion:	6.16
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw message injection/snooping facility using polling mode;
+		write a complete SCMI command message (header included) in
+		little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n> through the <m> transport
+		channel, using polling mode on the reception path.
+		(if transport is polling capable)
+		Any subsequently received response can be read from this same
+		entry if it arrived on channel <m> within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+		Channel identifier <m> matches the SCMI protocol number which
+		has been associated with this transport channel in the DT
+		description, with base protocol number 0x10 being the default
+		channel for this instance.
+		Note that these per-channel entries rooted at <..>/channels
+		exist only if the transport is configured to have more than
+		one default channel.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_poll_async
+Date:		June 2025
+KernelVersion:	6.16
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw asynchronous message injection/snooping facility using
+		polling-mode; write a complete SCMI asynchronous command message
+		(header included) in little-endian binary format to have it sent
+		to the configured backend SCMI server for instance <n> through
+		the <m> transport channel, using polling mode on the reception
+		path of the immediate part of the asynchronous command.
+		(if transport is polling capable)
+		Any subsequently received response can be read from this same
+		entry if it arrived on channel <m> within the configured
+		timeout.
+		Any additional delayed response received afterwards can be read
+		from this same entry too if it arrived within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+		Channel identifier <m> matches the SCMI protocol number which
+		has been associated with this transport channel in the DT
+		description, with base protocol number 0x10 being the default
+		channel for this instance.
+		Note that these per-channel entries rooted at <..>/channels
+		exist only if the transport is configured to have more than
+		one default channel.
+Users:		Debugging, any userspace test suite
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm linux-libre-6.16-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm
deleted file mode 100644
index 813987d5de4e..000000000000
--- linux-libre-6.15-gnu/Documentation/ABI/testing/debugfs-turris-mox-rwtm
+++ /dev/null
@@ -1,14 +0,0 @@
-What:		/sys/kernel/debug/turris-mox-rwtm/do_sign
-Date:		Jun 2020
-KernelVersion:	5.8
-Contact:	Marek Behún <kabel@kernel.org>
-Description:
-
-		======= ===========================================================
-		(Write) Message to sign with the ECDSA private key stored in
-		        device's OTP. The message must be exactly 64 bytes
-		        (since this is intended for SHA-512 hashes).
-		(Read)  The resulting signature, 136 bytes. This contains the
-			R and S values of the ECDSA signature, both in
-			big-endian format.
-		======= ===========================================================
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-cxl linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-cxl
index 99bb3faf7a0e..6b4e8c7a963d 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-cxl
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-cxl
@@ -242,7 +242,7 @@ Description:
 		decoding a Host Physical Address range. Note that this number
 		may be elevated without any regionX objects active or even
 		enumerated, as this may be due to decoders established by
-		platform firwmare or a previous kernel (kexec).
+		platform firmware or a previous kernel (kexec).
 
 
 What:		/sys/bus/cxl/devices/decoderX.Y
@@ -572,7 +572,7 @@ Description:
 
 
 What:		/sys/bus/cxl/devices/regionZ/accessY/read_bandwidth
-		/sys/bus/cxl/devices/regionZ/accessY/write_banwidth
+		/sys/bus/cxl/devices/regionZ/accessY/write_bandwidth
 Date:		Jan, 2024
 KernelVersion:	v6.9
 Contact:	linux-cxl@vger.kernel.org
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-iio linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-iio
index 722aa989baac..190bfcc1e836 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-iio
@@ -94,6 +94,7 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/events/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
@@ -740,7 +741,9 @@ Description:
 		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
 		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
+		7.7kohm_to_gnd: connected to ground via a 7.7kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		32kohm_to_gnd: connected to ground via a 32kOhm resistor,
 		42kohm_to_gnd: connected to ground via a 42kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
similarity index 72%
rename from Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
rename to Documentation/ABI/testing/sysfs-bus-pci-devices-aer
index d1f67bb81d5d..5ed284523956 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
@@ -117,3 +117,47 @@ Date:		July 2018
 KernelVersion:	4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_NONFATAL messages reported to rootport.
+
+PCIe AER ratelimits
+-------------------
+
+These attributes show up under all the devices that are AER capable.
+They represent configurable ratelimits of logs per error type.
+
+See Documentation/PCI/pcieaer-howto.rst for more info on ratelimits.
+
+What:		/sys/bus/pci/devices/<dev>/aer/correctable_ratelimit_interval_ms
+Date:		May 2025
+KernelVersion:	6.16.0
+Contact:	linux-pci@vger.kernel.org
+Description:	Writing 0 disables AER correctable error log ratelimiting.
+		Writing a positive value sets the ratelimit interval in ms.
+		Default is DEFAULT_RATELIMIT_INTERVAL (5000 ms).
+
+What:		/sys/bus/pci/devices/<dev>/aer/correctable_ratelimit_burst
+Date:		May 2025
+KernelVersion:	6.16.0
+Contact:	linux-pci@vger.kernel.org
+Description:	Ratelimit burst for correctable error logs. Writing a value
+		changes the number of errors (burst) allowed per interval
+		before ratelimiting. Reading gets the current ratelimit
+		burst. Default is DEFAULT_RATELIMIT_BURST (10).
+
+What:		/sys/bus/pci/devices/<dev>/aer/nonfatal_ratelimit_interval_ms
+Date:		May 2025
+KernelVersion:	6.16.0
+Contact:	linux-pci@vger.kernel.org
+Description:	Writing 0 disables AER non-fatal uncorrectable error log
+		ratelimiting. Writing a positive value sets the ratelimit
+		interval in ms. Default is DEFAULT_RATELIMIT_INTERVAL
+		(5000 ms).
+
+What:		/sys/bus/pci/devices/<dev>/aer/nonfatal_ratelimit_burst
+Date:		May 2025
+KernelVersion:	6.16.0
+Contact:	linux-pci@vger.kernel.org
+Description:	Ratelimit burst for non-fatal uncorrectable error logs.
+		Writing a value changes the number of errors (burst)
+		allowed per interval before ratelimiting. Reading gets the
+		current ratelimit burst. Default is DEFAULT_RATELIMIT_BURST
+		(10).
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-wmi linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-wmi
index aadb35b82198..d71a219c610e 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-bus-wmi
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-bus-wmi
@@ -76,6 +76,6 @@ Date:		May 2017
 Contact:	Darren Hart (VMware) <dvhart@infradead.org>
 Description:
 		This file contains a boolean flags signaling the data block
-		aassociated with the given WMI device is writable. If the
+		associated with the given WMI device is writable. If the
 		given WMI device is not associated with a data block, then
 		this file will not exist.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-class-led linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-led
index 2e24ac3bd7ef..0313b82644f2 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-class-led
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-led
@@ -72,6 +72,12 @@ Description:
 		/sys/class/leds/<led> once a given trigger is selected. For
 		their documentation see `sysfs-class-led-trigger-*`.
 
+		Writing "none" removes the trigger for this LED.
+
+		Writing "default" sets the trigger to the LED's default trigger
+		(which would often be configured in the device tree for the
+		hardware).
+
 What:		/sys/class/leds/<led>/inverted
 Date:		January 2011
 KernelVersion:	2.6.38
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-class-power linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-power
index 2a5c1a09a28f..87a058e14e7e 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-class-power
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-power
@@ -456,7 +456,7 @@ Description:
 			      "Over voltage", "Under voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
 			      "Over current", "Calibration required", "Warm",
-			      "Cool", "Hot", "No battery"
+			      "Cool", "Hot", "No battery", "Blown fuse", "Cell imbalance"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017
@@ -508,11 +508,12 @@ Description:
 		Access: Read, Write
 
 		Valid values:
-			================ ====================================
-			auto:            Charge normally, respect thresholds
-			inhibit-charge:  Do not charge while AC is attached
-			force-discharge: Force discharge while AC is attached
-			================ ====================================
+			===================== ========================================
+			auto:                 Charge normally, respect thresholds
+			inhibit-charge:       Do not charge while AC is attached
+			inhibit-charge-awake: inhibit-charge only when device is awake
+			force-discharge:      Force discharge while AC is attached
+			===================== ========================================
 
 What:		/sys/class/power_supply/<supply_name>/technology
 Date:		May 2007
@@ -822,3 +823,46 @@ Description:
 		Each entry is a link to the device which registered the extension.
 
 		Access: Read
+
+What:		/sys/class/power_supply/max8971-charger/fast_charge_timer
+Date:		May 2025
+KernelVersion:	6.15.0
+Contact:	Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+		This entry shows and sets the maximum time the max8971
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+
+		- 4 - 10 (hours), step by 1
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max8971-charger/top_off_threshold_current
+Date:		May 2025
+KernelVersion:	6.15.0
+Contact:	Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+		This entry shows and sets the charging current threshold for
+		entering top-off charging mode. When charging current in fast
+		charge mode drops below this value, the charger will trigger
+		interrupt and start top-off charging mode.
+
+		Valid values:
+
+		- 50000 - 200000 (microamps), step by 50000 (rounded down)
+
+What:		/sys/class/power_supply/max8971-charger/top_off_timer
+Date:		May 2025
+KernelVersion:	6.15.0
+Contact:	Svyatoslav Ryhel <clamor95@gmail.com>
+Description:
+		This entry shows and sets the maximum time the max8971
+		charger operates in top-off charge mode. When the timer expires
+		the device will terminate top-off charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+
+		- 0 - 70 (minutes), step by 10 (rounded down)
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-class-power-gaokun linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-power-gaokun
new file mode 100644
index 000000000000..0633aed7b355
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-class-power-gaokun
@@ -0,0 +1,27 @@
+What:		/sys/class/power_supply/gaokun-ec-battery/smart_charge_delay
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Pengyu Luo <mitltlatltl@gmail.com>
+Description:
+		This entry allows configuration of smart charging delay.
+
+		Smart charging behavior: when the power adapter is connected
+		for delay hours, battery charging will follow the rules of
+		charge_control_start_threshold and charge_control_end_threshold.
+		For more information about charge control, please refer to
+		sysfs-class-power.
+
+		Access: Read, Write
+
+		Valid values: In hours (non-negative)
+
+What:		/sys/class/power_supply/gaokun-ec-battery/battery_adaptive_charge
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Pengyu Luo <mitltlatltl@gmail.com>
+Description:
+		This entry allows enabling battery adaptive charging.
+
+		Access: Read, Write
+
+		Valid values: 0 (disabled) or 1 (enabled)
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-devices-power linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-power
index 54195530e97a..d3da88b26a53 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-devices-power
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-power
@@ -56,7 +56,7 @@ Date:		January 2009
 Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../async attribute allows the user space to
-		enable or diasble the device's suspend and resume callbacks to
+		enable or disable the device's suspend and resume callbacks to
 		be executed asynchronously (ie. in separate threads, in parallel
 		with the main suspend/resume thread) during system-wide power
 		transitions (eg. suspend to RAM, hibernation).
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
index 6a1acabb29d8..ab8cd337f43a 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -111,6 +111,7 @@ What:		/sys/devices/system/cpu/cpuidle/available_governors
 		/sys/devices/system/cpu/cpuidle/current_driver
 		/sys/devices/system/cpu/cpuidle/current_governor
 		/sys/devices/system/cpu/cpuidle/current_governer_ro
+		/sys/devices/system/cpu/cpuidle/intel_c1_demotion
 Date:		September 2007
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Discover cpuidle policy and mechanism
@@ -132,7 +133,11 @@ Description:	Discover cpuidle policy and mechanism
 
 		current_governor_ro: (RO) displays current idle policy.
 
-		See Documentation/admin-guide/pm/cpuidle.rst and
+		intel_c1_demotion: (RW) enables/disables the C1 demotion
+		feature on Intel CPUs.
+
+		See Documentation/admin-guide/pm/cpuidle.rst,
+		Documentation/admin-guide/pm/intel_idle.rst, and
 		Documentation/driver-api/pm/cpuidle.rst for more information.
 
 
@@ -268,6 +273,60 @@ Description:	Discover CPUs in the same CPU frequency coordination domain
 		This file is only present if the acpi-cpufreq or the cppc-cpufreq
 		drivers are in use.
 
+What:		/sys/devices/system/cpu/cpuX/cpufreq/auto_select
+Date:		May 2025
+Contact:	linux-pm@vger.kernel.org
+Description:	Autonomous selection enable
+
+		Read/write interface to control autonomous selection enable
+			Read returns autonomous selection status:
+				0: autonomous selection is disabled
+				1: autonomous selection is enabled
+
+			Write 'y' or '1' or 'on' to enable autonomous selection.
+			Write 'n' or '0' or 'off' to disable autonomous selection.
+
+		This file is only present if the cppc-cpufreq driver is in use.
+
+What:		/sys/devices/system/cpu/cpuX/cpufreq/auto_act_window
+Date:		May 2025
+Contact:	linux-pm@vger.kernel.org
+Description:	Autonomous activity window
+
+		This file indicates a moving utilization sensitivity window to
+		the platform's autonomous selection policy.
+
+		Read/write an integer represents autonomous activity window (in
+		microseconds) from/to this file. The max value to write is
+		1270000000 but the max significand is 127. This means that if 128
+		is written to this file, 127 will be stored. If the value is
+		greater than 130, only the first two digits will be saved as
+		significand.
+
+		Writing a zero value to this file enable the platform to
+		determine an appropriate Activity Window depending on the workload.
+
+		Writing to this file only has meaning when Autonomous Selection is
+		enabled.
+
+		This file is only present if the cppc-cpufreq driver is in use.
+
+What:		/sys/devices/system/cpu/cpuX/cpufreq/energy_performance_preference_val
+Date:		May 2025
+Contact:	linux-pm@vger.kernel.org
+Description:	Energy performance preference
+
+		Read/write an 8-bit integer from/to this file. This file
+		represents a range of values from 0 (performance preference) to
+		0xFF (energy efficiency preference) that influences the rate of
+		performance increase/decrease and the result of the hardware's
+		energy efficiency and performance optimization policies.
+
+		Writing to this file only has meaning when Autonomous Selection is
+		enabled.
+
+		This file is only present if the cppc-cpufreq driver is in use.
+
 
 What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
 Date:		August 2008
@@ -485,6 +544,7 @@ What:		/sys/devices/system/cpu/cpuX/regs/
 		/sys/devices/system/cpu/cpuX/regs/identification/
 		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
 		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+		/sys/devices/system/cpu/cpuX/regs/identification/aidr_el1
 		/sys/devices/system/cpu/cpuX/regs/identification/smidr_el1
 Date:		June 2016
 Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
@@ -517,12 +577,14 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/old_microcode
 		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/srbds
+		/sys/devices/system/cpu/vulnerabilities/tsa
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest
new file mode 100644
index 000000000000..8fca56c8c9df
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest
@@ -0,0 +1,63 @@
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/MRNAME[:HASH]
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		Value of a TDX measurement register (MR). MRNAME and HASH above
+		are placeholders. The optional suffix :HASH is used for MRs
+		that have associated hash algorithms. See below for a complete
+		list of TDX MRs exposed via sysfs. Refer to Intel TDX Module
+		ABI Specification for the definition of TDREPORT and the full
+		list of TDX measurements.
+
+		Intel TDX Module ABI Specification can be found at:
+		https://www.intel.com/content/www/us/en/developer/tools/trust-domain-extensions/documentation.html#architecture
+
+		See also:
+		https://docs.kernel.org/driver-api/coco/measurement-registers.html
+
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/mrconfigid
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		(RO) MRCONFIGID - 48-byte immutable storage typically used for
+		software-defined ID for non-owner-defined configuration of the
+		guest TD – e.g., run-time or OS configuration.
+
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/mrowner
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		(RO) MROWNER - 48-byte immutable storage typically used for
+		software-defined ID for the guest TD’s owner.
+
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/mrownerconfig
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		(RO) MROWNERCONFIG - 48-byte immutable storage typically used
+		for software-defined ID for owner-defined configuration of the
+		guest TD – e.g., specific to the workload rather than the
+		run-time or OS.
+
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/mrtd:sha384
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		(RO) MRTD - Measurement of the initial contents of the TD.
+
+What:		/sys/devices/virtual/misc/tdx_guest/measurements/rtmr[0123]:sha384
+Date:		April, 2025
+KernelVersion:	v6.16
+Contact:	linux-coco@lists.linux.dev
+Description:
+		(RW) RTMR[0123] - 4 Run-Time extendable Measurement Registers.
+		Read from any of these returns the current value of the
+		corresponding RTMR. Write extends the written buffer to the
+		RTMR. All writes must start at offset 0 and be 48 bytes in
+		size. Partial writes will result in EINVAL returned by the
+		write() syscall.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index a6e400364932..faeae8fedb14 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -17,7 +17,7 @@ Description:	Read only. Returns the firmware version of Intel MAX10
 What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_address
 Date:		January 2021
 KernelVersion:  5.12
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns the first MAC address in a block
 		of sequential MAC addresses assigned to the board
 		that is managed by the Intel MAX10 BMC. It is stored in
@@ -28,7 +28,7 @@ Description:	Read only. Returns the first MAC address in a block
 What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_count
 Date:		January 2021
 KernelVersion:  5.12
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns the number of sequential MAC
 		addresses assigned to the board managed by the Intel
 		MAX10 BMC. This value is stored in FLASH and is mirrored
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
index c69fd3894eb4..3a6ca780c75c 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
@@ -1,7 +1,7 @@
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns the root entry hash for the static
 		region if one is programmed, else it returns the
 		string: "hash not programmed".  This file is only
@@ -11,7 +11,7 @@ Description:	Read only. Returns the root entry hash for the static
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns the root entry hash for the partial
 		reconfiguration region if one is programmed, else it
 		returns the string: "hash not programmed".  This file
@@ -21,7 +21,7 @@ Description:	Read only. Returns the root entry hash for the partial
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns the root entry hash for the BMC image
 		if one is programmed, else it returns the string:
 		"hash not programmed".  This file is only visible if the
@@ -31,7 +31,7 @@ Description:	Read only. Returns the root entry hash for the BMC image
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns a list of indices for canceled code
 		signing keys for the static region. The standard bitmap
 		list format is used (e.g. "1,2-6,9").
@@ -39,7 +39,7 @@ Description:	Read only. Returns a list of indices for canceled code
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_canceled_csks
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns a list of indices for canceled code
 		signing keys for the partial reconfiguration region. The
 		standard bitmap list format is used (e.g. "1,2-6,9").
@@ -47,7 +47,7 @@ Description:	Read only. Returns a list of indices for canceled code
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_canceled_csks
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns a list of indices for canceled code
 		signing keys for the BMC.  The standard bitmap list format
 		is used (e.g. "1,2-6,9").
@@ -55,7 +55,7 @@ Description:	Read only. Returns a list of indices for canceled code
 What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/flash_count
 Date:		Sep 2022
 KernelVersion:	5.20
-Contact:	Peter Colberg <peter.colberg@altera.com>
+Contact:	Matthew Gerlach <matthew.gerlach@altera.com>
 Description:	Read only. Returns number of times the secure update
 		staging area has been flashed.
 		Format: "%u".
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
index cb207c79680d..5a91dcccd3ac 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -60,26 +60,26 @@ Description:	RO. Package default power limit (default TDP setting).
 
 		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_crit
-Date:		February 2024
-KernelVersion:	6.8
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
+Date:		May 2025
+KernelVersion:	6.15
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RW. Package reactive critical (I1) power limit in microwatts.
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
 
-		Package reactive critical (I1) power limit in microwatts is exposed
+		Card reactive critical (I1) power limit in microwatts is exposed
 		for client products. The power controller will throttle the
 		operating frequency if the power averaged over a window exceeds
 		this limit.
 
 		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr2_crit
-Date:		February 2024
-KernelVersion:	6.8
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
+Date:		May 2025
+KernelVersion:	6.15
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RW. Package reactive critical (I1) power limit in milliamperes.
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
 
-		Package reactive critical (I1) power limit in milliamperes is
+		Card reactive critical (I1) power limit in milliamperes is
 		exposed for server products. The power controller will throttle
 		the operating frequency if the power averaged over a window
 		exceeds this limit.
@@ -124,3 +124,27 @@ Contact:	intel-xe@lists.freedesktop.org
 Description:	RO. VRAM temperature in millidegree Celsius.
 
 		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan1_input
+Date:		March 2025
+KernelVersion:	6.16
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Fan 1 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan2_input
+Date:		March 2025
+KernelVersion:	6.16
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Fan 2 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan3_input
+Date:		March 2025
+KernelVersion:	6.16
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Fan 3 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-qat_ras linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-qat_ras
index 176dea1e9c0a..82ceb04445ec 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-qat_ras
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-qat_ras
@@ -4,7 +4,7 @@ KernelVersion:	6.7
 Contact:	qat-linux@intel.com
 Description:	(RO) Reports the number of correctable errors detected by the device.
 
-		This attribute is only available for qat_4xxx devices.
+		This attribute is only available for qat_4xxx and qat_6xxx devices.
 
 What:		/sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal
 Date:		January 2024
@@ -12,7 +12,7 @@ KernelVersion:	6.7
 Contact:	qat-linux@intel.com
 Description:	(RO) Reports the number of non fatal errors detected by the device.
 
-		This attribute is only available for qat_4xxx devices.
+		This attribute is only available for qat_4xxx and qat_6xxx devices.
 
 What:		/sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
 Date:		January 2024
@@ -20,7 +20,7 @@ KernelVersion:	6.7
 Contact:	qat-linux@intel.com
 Description:	(RO) Reports the number of fatal errors detected by the device.
 
-		This attribute is only available for qat_4xxx devices.
+		This attribute is only available for qat_4xxx and qat_6xxx devices.
 
 What:		/sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters
 Date:		January 2024
@@ -38,4 +38,4 @@ Description:	(WO) Write to resets all error counters of a device.
 			# cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
 			0
 
-		This attribute is only available for qat_4xxx devices.
+		This attribute is only available for qat_4xxx and qat_6xxx devices.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-ufs linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-ufs
index e36d2de16cbd..615453fcc9ff 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-driver-ufs
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description:	This file shows the thin provisioning type. This is one of
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total physical memory resources. This is
@@ -1636,3 +1636,52 @@ Description:
 		attribute value.
 
 		The attribute is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/wb_resize_enable
+What:		/sys/bus/platform/devices/*.ufs/wb_resize_enable
+Date:		April 2025
+Contact:	Huan Tang <tanghuan@vivo.com>
+Description:
+		The host can enable the WriteBooster buffer resize by setting this
+		attribute.
+
+		========  ======================================
+		idle      There is no resize operation
+		decrease  Decrease WriteBooster buffer size
+		increase  Increase WriteBooster buffer size
+		========  ======================================
+
+		The file is write only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_hint
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_resize_hint
+Date:		April 2025
+Contact:	Huan Tang <tanghuan@vivo.com>
+Description:
+		wb_resize_hint indicates hint information about which type of resize
+		for WriteBooster buffer is recommended by the device.
+
+		=========  ======================================
+		keep       Recommend keep the buffer size
+		decrease   Recommend to decrease the buffer size
+		increase   Recommend to increase the buffer size
+		=========  ======================================
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_resize_status
+Date:		April 2025
+Contact:	Huan Tang <tanghuan@vivo.com>
+Description:
+		The host can check the resize operation status of the WriteBooster
+		buffer by reading this attribute.
+
+		================  ========================================
+		idle              Resize operation is not issued
+		in_progress       Resize operation in progress
+		complete_success  Resize operation completed successfully
+		general_failure   Resize operation general failure
+		================  ========================================
+
+		The file is read only.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-edac-scrub linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-edac-scrub
index c43be90deab4..ab6014743da5 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-edac-scrub
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-edac-scrub
@@ -49,6 +49,12 @@ Description:
 		(RO) Supported minimum scrub cycle duration in seconds
 		by the memory scrubber.
 
+		Device-based scrub: returns the minimum scrub cycle
+		supported by the memory device.
+
+		Region-based scrub: returns the max of minimum scrub cycles
+		supported by individual memory devices that back the region.
+
 What:		/sys/bus/edac/devices/<dev-name>/scrubX/max_cycle_duration
 Date:		March 2025
 KernelVersion:	6.15
@@ -57,6 +63,16 @@ Description:
 		(RO) Supported maximum scrub cycle duration in seconds
 		by the memory scrubber.
 
+		Device-based scrub: returns the maximum scrub cycle supported
+		by the memory device.
+
+		Region-based scrub: returns the min of maximum scrub cycles
+		supported by individual memory devices that back the region.
+
+		If the memory device does not provide maximum scrub cycle
+		information, return the maximum supported value of the scrub
+		cycle field.
+
 What:		/sys/bus/edac/devices/<dev-name>/scrubX/current_cycle_duration
 Date:		March 2025
 KernelVersion:	6.15
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-firmware-acpi linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
index 5249ad5a96d9..f4de60c4134d 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -248,3 +248,24 @@ Description:
 		  # cat ff_pwr_btn
 		  7	enabled
 
+What:		/sys/firmware/acpi/memory_ranges/rangeX
+Date:		February 2025
+Contact:	Tony Luck <tony.luck@intel.com>
+Description:
+		On systems with the ACPI MRRM table reports the parameters for
+		each range.
+
+		base: Starting system physical address.
+
+		length: Length of this range in bytes.
+
+		node: NUMA node that this range belongs to. Negative numbers
+		indicate that the node number could not be determined (e.g
+		for an address range that is reserved for future hot add of
+		memory).
+
+		local_region_id: ID associated with access by agents
+		local to this range of addresses.
+
+		remote_region_id: ID associated with access by agents
+		non-local to this range of addresses.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
index ea5e5b489bc7..26741cb84504 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
@@ -12,15 +12,6 @@ Contact:	Marek Behún <kabel@kernel.org>
 Description:	(Read) MAC addresses burned into eFuses of this Turris Mox board.
 		Format: %pM
 
-What:		/sys/firmware/turris-mox-rwtm/pubkey
-Date:		August 2019
-KernelVersion:	5.4
-Contact:	Marek Behún <kabel@kernel.org>
-Description:	(Read) ECDSA public key (in pubkey hex compressed form) computed
-		as pair to the ECDSA private key burned into eFuses of this
-		Turris Mox Board.
-		Format: string
-
 What:		/sys/firmware/turris-mox-rwtm/ram_size
 Date:		August 2019
 KernelVersion:	5.4
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-fs-erofs linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-fs-erofs
index b134146d735b..bf3b6299c15e 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-fs-erofs
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-fs-erofs
@@ -27,3 +27,11 @@ Description:	Writing to this will drop compression-related caches,
 		- 1 : invalidate cached compressed folios
 		- 2 : drop in-memory pclusters
 		- 3 : drop in-memory pclusters and cached compressed folios
+
+What:		/sys/fs/erofs/accel
+Date:		May 2025
+Contact:	"Bo Liu" <liubo03@inspur.com>
+Description:	Used to set or show hardware accelerators in effect
+		and multiple accelerators are separated by '\n'.
+		Supported accelerator(s): qat_deflate.
+		Disable all accelerators with an empty string (echo > accel).
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index 59adb7dc6f9e..bf03263b9f46 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -270,7 +270,7 @@ Description:	Shows all enabled kernel features.
 		inode_checksum, flexible_inline_xattr, quota_ino,
 		inode_crtime, lost_found, verity, sb_checksum,
 		casefold, readonly, compression, test_dummy_encryption_v2,
-		atomic_write, pin_file, encrypted_casefold.
+		atomic_write, pin_file, encrypted_casefold, linear_lookup.
 
 What:		/sys/fs/f2fs/<disk>/inject_rate
 Date:		May 2016
@@ -710,32 +710,34 @@ Description:	Support configuring fault injection type, should be
 		enabled with fault_injection option, fault type value
 		is shown below, it supports single or combined type.
 
-		===========================      ===========
+		===========================      ==========
 		Type_Name                        Type_Value
-		===========================      ===========
-		FAULT_KMALLOC                    0x000000001
-		FAULT_KVMALLOC                   0x000000002
-		FAULT_PAGE_ALLOC                 0x000000004
-		FAULT_PAGE_GET                   0x000000008
-		FAULT_ALLOC_BIO                  0x000000010 (obsolete)
-		FAULT_ALLOC_NID                  0x000000020
-		FAULT_ORPHAN                     0x000000040
-		FAULT_BLOCK                      0x000000080
-		FAULT_DIR_DEPTH                  0x000000100
-		FAULT_EVICT_INODE                0x000000200
-		FAULT_TRUNCATE                   0x000000400
-		FAULT_READ_IO                    0x000000800
-		FAULT_CHECKPOINT                 0x000001000
-		FAULT_DISCARD                    0x000002000
-		FAULT_WRITE_IO                   0x000004000
-		FAULT_SLAB_ALLOC                 0x000008000
-		FAULT_DQUOT_INIT                 0x000010000
-		FAULT_LOCK_OP                    0x000020000
-		FAULT_BLKADDR_VALIDITY           0x000040000
-		FAULT_BLKADDR_CONSISTENCE        0x000080000
-		FAULT_NO_SEGMENT                 0x000100000
-		FAULT_INCONSISTENT_FOOTER        0x000200000
-		===========================      ===========
+		===========================      ==========
+		FAULT_KMALLOC                    0x00000001
+		FAULT_KVMALLOC                   0x00000002
+		FAULT_PAGE_ALLOC                 0x00000004
+		FAULT_PAGE_GET                   0x00000008
+		FAULT_ALLOC_BIO                  0x00000010 (obsolete)
+		FAULT_ALLOC_NID                  0x00000020
+		FAULT_ORPHAN                     0x00000040
+		FAULT_BLOCK                      0x00000080
+		FAULT_DIR_DEPTH                  0x00000100
+		FAULT_EVICT_INODE                0x00000200
+		FAULT_TRUNCATE                   0x00000400
+		FAULT_READ_IO                    0x00000800
+		FAULT_CHECKPOINT                 0x00001000
+		FAULT_DISCARD                    0x00002000
+		FAULT_WRITE_IO                   0x00004000
+		FAULT_SLAB_ALLOC                 0x00008000
+		FAULT_DQUOT_INIT                 0x00010000
+		FAULT_LOCK_OP                    0x00020000
+		FAULT_BLKADDR_VALIDITY           0x00040000
+		FAULT_BLKADDR_CONSISTENCE        0x00080000
+		FAULT_NO_SEGMENT                 0x00100000
+		FAULT_INCONSISTENT_FOOTER        0x00200000
+		FAULT_TIMEOUT                    0x00400000 (1000ms)
+		FAULT_VMALLOC                    0x00800000
+		===========================      ==========
 
 What:		/sys/fs/f2fs/<disk>/discard_io_aware_gran
 Date:		January 2023
@@ -846,3 +848,16 @@ Description:	For several zoned storage devices, vendors will provide extra space
 		reserved_blocks. However, it is not enough, since this extra space should
 		not be shown to users. So, with this new sysfs node, we can hide the space
 		by substracting reserved_blocks from total bytes.
+
+What:		/sys/fs/f2fs/<disk>/encoding_flags
+Date:		April 2025
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	This is a read-only entry to show the value of sb.s_encoding_flags, the
+		value is hexadecimal.
+
+		============================     ==========
+		Flag_Name                        Flag_Value
+		============================     ==========
+		SB_ENC_STRICT_MODE_FL            0x00000001
+		SB_ENC_NO_COMPAT_FALLBACK_FL     0x00000002
+		============================     ==========
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-hardlockup_count linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-hardlockup_count
new file mode 100644
index 000000000000..dfdd4078b077
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-hardlockup_count
@@ -0,0 +1,7 @@
+What:		/sys/kernel/hardlockup_count
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		Shows how many times the system has detected a hard lockup since last boot.
+		Available only if CONFIG_HARDLOCKUP_DETECTOR is enabled.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
index 293197f180ad..5697ab154c1f 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -283,6 +283,12 @@ Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing to and reading from this file sets and gets the current
 		value of the goal metric.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/nid
+Date:		Apr 2025
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the nid
+		parameter of the goal.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil
 Date:		Mar 2022
 Contact:	SeongJae Park <sj@kernel.org>
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
index 0b7972de04e9..649c0e9b895c 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-mempolicy-weighted-interleave
@@ -20,6 +20,35 @@ Description:	Weight configuration interface for nodeN
 		Minimum weight: 1
 		Maximum weight: 255
 
-		Writing an empty string or `0` will reset the weight to the
-		system default. The system default may be set by the kernel
-		or drivers at boot or during hotplug events.
+		Writing invalid values (i.e. any values not in [1,255],
+		empty string, ...) will return -EINVAL.
+
+		Changing the weight to a valid value will automatically
+		switch the system to manual mode as well.
+
+What:		/sys/kernel/mm/mempolicy/weighted_interleave/auto
+Date:		May 2025
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Auto-weighting configuration interface
+
+		Configuration mode for weighted interleave. 'true' indicates
+		that the system is in auto mode, and a 'false' indicates that
+		the system is in manual mode.
+
+		In auto mode, all node weights are re-calculated and overwritten
+		(visible via the nodeN interfaces) whenever new bandwidth data
+		is made available during either boot or hotplug events.
+
+		In manual mode, node weights can only be updated by the user.
+		Note that nodes that are onlined with previously set weights
+		will reuse those weights. If they were not previously set or
+		are onlined with missing bandwidth data, the weights will use
+		a default weight of 1.
+
+		Writing any true value string (e.g. Y or 1) will enable auto
+		mode, while writing any false value string (e.g. N or 0) will
+		enable manual mode. All other strings are ignored and will
+		return -EINVAL.
+
+		Writing a new weight to a node directly via the nodeN interface
+		will also automatically switch the system to manual mode.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-numa linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-numa
index 77e559d4ed80..90e375ff54cb 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-mm-numa
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-mm-numa
@@ -16,9 +16,13 @@ Description:	Enable/disable demoting pages during reclaim
 		Allowing page migration during reclaim enables these
 		systems to migrate pages from fast tiers to slow tiers
 		when the fast tier is under pressure.  This migration
-		is performed before swap.  It may move data to a NUMA
-		node that does not fall into the cpuset of the
-		allocating process which might be construed to violate
-		the guarantees of cpusets.  This should not be enabled
-		on systems which need strict cpuset location
-		guarantees.
+		is performed before swap if an eligible numa node is
+		present in cpuset.mems for the cgroup (or if cpuset v1
+		is being used). If cpusets.mems changes at runtime, it
+		may move data to a NUMA node that does not fall into the
+		cpuset of the new cpusets.mems, which might be construed
+		to violate the guarantees of cpusets.  Shared memory,
+		such as libraries, owned by another cgroup may still be
+		demoted and result in memory use on a node not present
+		in cpusets.mem. This should not be enabled on systems
+		which need strict cpuset location guarantees.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-rcu_stall_count linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-rcu_stall_count
new file mode 100644
index 000000000000..a4a97a7f4a4d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-rcu_stall_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/rcu_stall_count
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		Shows how many times the system has detected an RCU stall since last boot.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-slab linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-slab
index cd5fb8fa3ddf..658999be5164 100644
--- linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-slab
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-slab
@@ -2,7 +2,7 @@ What:		/sys/kernel/slab
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The /sys/kernel/slab directory contains a snapshot of the
 		internal state of the SLUB allocator for each cache.  Certain
@@ -14,7 +14,7 @@ What:		/sys/kernel/slab/<cache>/aliases
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The aliases file is read-only and specifies how many caches
 		have merged into this cache.
@@ -23,7 +23,7 @@ What:		/sys/kernel/slab/<cache>/align
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The align file is read-only and specifies the cache's object
 		alignment in bytes.
@@ -32,7 +32,7 @@ What:		/sys/kernel/slab/<cache>/alloc_calls
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_calls file is read-only and lists the kernel code
 		locations from which allocations for this cache were performed.
@@ -43,7 +43,7 @@ What:		/sys/kernel/slab/<cache>/alloc_fastpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_fastpath file shows how many objects have been
 		allocated using the fast path.  It can be written to clear the
@@ -54,7 +54,7 @@ What:		/sys/kernel/slab/<cache>/alloc_from_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_from_partial file shows how many times a cpu slab has
 		been full and it has been refilled by using a slab from the list
@@ -66,7 +66,7 @@ What:		/sys/kernel/slab/<cache>/alloc_refill
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_refill file shows how many times the per-cpu freelist
 		was empty but there were objects available as the result of
@@ -77,7 +77,7 @@ What:		/sys/kernel/slab/<cache>/alloc_slab
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_slab file is shows how many times a new slab had to
 		be allocated from the page allocator.  It can be written to
@@ -88,7 +88,7 @@ What:		/sys/kernel/slab/<cache>/alloc_slowpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The alloc_slowpath file shows how many objects have been
 		allocated using the slow path because of a refill or
@@ -100,7 +100,7 @@ What:		/sys/kernel/slab/<cache>/cache_dma
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The cache_dma file is read-only and specifies whether objects
 		are from ZONE_DMA.
@@ -110,7 +110,7 @@ What:		/sys/kernel/slab/<cache>/cpu_slabs
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The cpu_slabs file is read-only and displays how many cpu slabs
 		are active and their NUMA locality.
@@ -119,7 +119,7 @@ What:		/sys/kernel/slab/<cache>/cpuslab_flush
 Date:		April 2009
 KernelVersion:	2.6.31
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The file cpuslab_flush shows how many times a cache's cpu slabs
 		have been flushed as the result of destroying or shrinking a
@@ -132,7 +132,7 @@ What:		/sys/kernel/slab/<cache>/ctor
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The ctor file is read-only and specifies the cache's object
 		constructor function, which is invoked for each object when a
@@ -142,7 +142,7 @@ What:		/sys/kernel/slab/<cache>/deactivate_empty
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The deactivate_empty file shows how many times an empty cpu slab
 		was deactivated.  It can be written to clear the current count.
@@ -152,7 +152,7 @@ What:		/sys/kernel/slab/<cache>/deactivate_full
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The deactivate_full file shows how many times a full cpu slab
 		was deactivated.  It can be written to clear the current count.
@@ -162,7 +162,7 @@ What:		/sys/kernel/slab/<cache>/deactivate_remote_frees
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The deactivate_remote_frees file shows how many times a cpu slab
 		has been deactivated and contained free objects that were freed
@@ -173,7 +173,7 @@ What:		/sys/kernel/slab/<cache>/deactivate_to_head
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The deactivate_to_head file shows how many times a partial cpu
 		slab was deactivated and added to the head of its node's partial
@@ -184,7 +184,7 @@ What:		/sys/kernel/slab/<cache>/deactivate_to_tail
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The deactivate_to_tail file shows how many times a partial cpu
 		slab was deactivated and added to the tail of its node's partial
@@ -195,7 +195,7 @@ What:		/sys/kernel/slab/<cache>/destroy_by_rcu
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The destroy_by_rcu file is read-only and specifies whether
 		slabs (not objects) are freed by rcu.
@@ -204,7 +204,7 @@ What:		/sys/kernel/slab/<cache>/free_add_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_add_partial file shows how many times an object has
 		been freed in a full slab so that it had to added to its node's
@@ -215,7 +215,7 @@ What:		/sys/kernel/slab/<cache>/free_calls
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_calls file is read-only and lists the locations of
 		object frees if slab debugging is enabled (see
@@ -225,7 +225,7 @@ What:		/sys/kernel/slab/<cache>/free_fastpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_fastpath file shows how many objects have been freed
 		using the fast path because it was an object from the cpu slab.
@@ -236,7 +236,7 @@ What:		/sys/kernel/slab/<cache>/free_frozen
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_frozen file shows how many objects have been freed to
 		a frozen slab (i.e. a remote cpu slab).  It can be written to
@@ -247,7 +247,7 @@ What:		/sys/kernel/slab/<cache>/free_remove_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_remove_partial file shows how many times an object has
 		been freed to a now-empty slab so that it had to be removed from
@@ -259,7 +259,7 @@ What:		/sys/kernel/slab/<cache>/free_slab
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_slab file shows how many times an empty slab has been
 		freed back to the page allocator.  It can be written to clear
@@ -270,7 +270,7 @@ What:		/sys/kernel/slab/<cache>/free_slowpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The free_slowpath file shows how many objects have been freed
 		using the slow path (i.e. to a full or partial slab).  It can
@@ -281,7 +281,7 @@ What:		/sys/kernel/slab/<cache>/hwcache_align
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The hwcache_align file is read-only and specifies whether
 		objects are aligned on cachelines.
@@ -301,7 +301,7 @@ What:		/sys/kernel/slab/<cache>/object_size
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The object_size file is read-only and specifies the cache's
 		object size.
@@ -310,7 +310,7 @@ What:		/sys/kernel/slab/<cache>/objects
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The objects file is read-only and displays how many objects are
 		active and from which nodes they are from.
@@ -319,7 +319,7 @@ What:		/sys/kernel/slab/<cache>/objects_partial
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The objects_partial file is read-only and displays how many
 		objects are on partial slabs and from which nodes they are
@@ -329,7 +329,7 @@ What:		/sys/kernel/slab/<cache>/objs_per_slab
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The file objs_per_slab is read-only and specifies how many
 		objects may be allocated from a single slab of the order
@@ -339,7 +339,7 @@ What:		/sys/kernel/slab/<cache>/order
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The order file specifies the page order at which new slabs are
 		allocated.  It is writable and can be changed to increase the
@@ -356,7 +356,7 @@ What:		/sys/kernel/slab/<cache>/order_fallback
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The order_fallback file shows how many times an allocation of a
 		new slab has not been possible at the cache's order and instead
@@ -369,7 +369,7 @@ What:		/sys/kernel/slab/<cache>/partial
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The partial file is read-only and displays how long many
 		partial slabs there are and how long each node's list is.
@@ -378,7 +378,7 @@ What:		/sys/kernel/slab/<cache>/poison
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The poison file specifies whether objects should be poisoned
 		when a new slab is allocated.
@@ -387,7 +387,7 @@ What:		/sys/kernel/slab/<cache>/reclaim_account
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The reclaim_account file specifies whether the cache's objects
 		are reclaimable (and grouped by their mobility).
@@ -396,7 +396,7 @@ What:		/sys/kernel/slab/<cache>/red_zone
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The red_zone file specifies whether the cache's objects are red
 		zoned.
@@ -405,7 +405,7 @@ What:		/sys/kernel/slab/<cache>/remote_node_defrag_ratio
 Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The file remote_node_defrag_ratio specifies the percentage of
 		times SLUB will attempt to refill the cpu slab with a partial
@@ -419,7 +419,7 @@ What:		/sys/kernel/slab/<cache>/sanity_checks
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The sanity_checks file specifies whether expensive checks
 		should be performed on free and, at minimum, enables double free
@@ -430,7 +430,7 @@ What:		/sys/kernel/slab/<cache>/shrink
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The shrink file is used to reclaim unused slab cache
 		memory from a cache.  Empty per-cpu or partial slabs
@@ -446,7 +446,7 @@ What:		/sys/kernel/slab/<cache>/slab_size
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The slab_size file is read-only and specifies the object size
 		with metadata (debugging information and alignment) in bytes.
@@ -455,7 +455,7 @@ What:		/sys/kernel/slab/<cache>/slabs
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The slabs file is read-only and displays how long many slabs
 		there are (both cpu and partial) and from which nodes they are
@@ -465,7 +465,7 @@ What:		/sys/kernel/slab/<cache>/store_user
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The store_user file specifies whether the location of
 		allocation or free should be tracked for a cache.
@@ -474,7 +474,7 @@ What:		/sys/kernel/slab/<cache>/total_objects
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The total_objects file is read-only and displays how many total
 		objects a cache has and from which nodes they are from.
@@ -483,7 +483,7 @@ What:		/sys/kernel/slab/<cache>/trace
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		The trace file specifies whether object allocations and frees
 		should be traced.
@@ -492,7 +492,7 @@ What:		/sys/kernel/slab/<cache>/validate
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
-		Christoph Lameter <cl@linux-foundation.org>
+		Christoph Lameter <cl@gentwo.org>
 Description:
 		Writing to the validate file causes SLUB to traverse all of its
 		cache's objects and check the validity of metadata.
@@ -506,14 +506,14 @@ Description:
 
 What:		/sys/kernel/slab/<cache>/slabs_cpu_partial
 Date:		Aug 2011
-Contact:	Christoph Lameter <cl@linux.com>
+Contact:	Christoph Lameter <cl@gentwo.org>
 Description:
 		This read-only file shows the number of partialli allocated
 		frozen slabs.
 
 What:		/sys/kernel/slab/<cache>/cpu_partial
 Date:		Aug 2011
-Contact:	Christoph Lameter <cl@linux.com>
+Contact:	Christoph Lameter <cl@gentwo.org>
 Description:
 		This read-only file shows the number of per cpu partial
 		pages to keep around.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-kernel-softlockup_count linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-softlockup_count
new file mode 100644
index 000000000000..337ff5531b5f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-kernel-softlockup_count
@@ -0,0 +1,7 @@
+What:		/sys/kernel/softlockup_count
+Date:		May 2025
+KernelVersion:	6.16
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		Shows how many times the system has detected a soft lockup since last boot.
+		Available only if CONFIG_SOFTLOCKUP_DETECTOR is enabled.
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-platform-alienware-wmi linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-platform-alienware-wmi
new file mode 100644
index 000000000000..4877b3745f4e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-platform-alienware-wmi
@@ -0,0 +1,14 @@
+What:		/sys/class/hwmon/hwmonX/fanY_boost
+Date:		March 2025
+KernelVersion:	6.15
+Contact:	Kurt Borja <kuurtb@gmail.com>
+Description:
+		This file exposes fan boost control for Dell gaming laptops with
+		the AWCC WMI interface.
+
+		See Documentation/admin-guide/laptops/alienware-wmi.rst for
+		details.
+
+		Integer value in the range 0 to 255
+
+		RW
diff --git linux-libre-6.15-gnu/Documentation/ABI/testing/sysfs-platform-oxp linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-platform-oxp
new file mode 100644
index 000000000000..b3f39fc21dfa
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/ABI/testing/sysfs-platform-oxp
@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/<platform>/tt_toggle
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	"Antheas Kapenekakis" <lkml@antheas.dev>
+Description:
+		Takeover TDP controls from the device. OneXPlayer devices have a
+		turbo button that can be used to switch between two TDP modes
+		(usually 15W and 25W). By setting this attribute to 1, this
+		functionality is disabled, handing TDP control over to (Windows)
+		userspace software and the Turbo button turns into a keyboard
+		shortcut over the AT keyboard of the device. In addition,
+		using this setting is a prerequisite for PWM control for most
+		newer models (otherwise it NOOPs).
+
+What:		/sys/devices/platform/<platform>/tt_led
+Date:		April 2025
+KernelVersion:	6.16
+Contact:	"Antheas Kapenekakis" <lkml@antheas.dev>
+Description:
+		Some OneXPlayer devices (e.g., X1 series) feature a little LED
+		nested in the Turbo button. This LED is illuminated when the
+		device is in the higher TDP mode (e.g., 25W). Once tt_toggle
+		is engaged, this LED is left dangling to its last state. This
+		attribute allows userspace to control the LED state manually
+		(either with 1 or 0). Only a subset of devices contain this LED.
diff --git linux-libre-6.15-gnu/Documentation/Makefile linux-libre-6.16-gnu/Documentation/Makefile
index 63094646df28..d30d66ddf1ad 100644
--- linux-libre-6.15-gnu/Documentation/Makefile
+++ linux-libre-6.16-gnu/Documentation/Makefile
@@ -60,9 +60,8 @@ endif #HAVE_LATEXMK
 # Internal variables.
 PAPEROPT_a4     = -D latex_paper_size=a4
 PAPEROPT_letter = -D latex_paper_size=letter
-KERNELDOC       = $(srctree)/scripts/kernel-doc
-KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
-ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
+ALLSPHINXOPTS   = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
+ALLSPHINXOPTS   += $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
 ifneq ($(wildcard $(srctree)/.config),)
 ifeq ($(CONFIG_RUST),y)
 	# Let Sphinx know we will include rustdoc
@@ -83,9 +82,11 @@ loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
 # $5 reST source folder relative to $(src),
 #    e.g. "userspace-api/media" for the linux-tv book-set at ./Documentation/userspace-api/media
 
+PYTHONPYCACHEPREFIX ?= $(abspath $(BUILDDIR)/__pycache__)
+
 quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
       cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media $2 && \
-	PYTHONDONTWRITEBYTECODE=1 \
+	PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(src)/$5/$(SPHINX_CONF)) \
 	$(PYTHON3) $(srctree)/scripts/jobserver-exec \
 	$(CONFIG_SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \
diff --git linux-libre-6.15-gnu/Documentation/PCI/controller/index.rst linux-libre-6.16-gnu/Documentation/PCI/controller/index.rst
new file mode 100644
index 000000000000..c2ce9ccdcfa0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/PCI/controller/index.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================
+PCI Native Host Bridge and Endpoint Drivers
+===========================================
+
+.. toctree::
+   :maxdepth: 2
+
+   rcar-pcie-firmware
diff --git linux-libre-6.15-gnu/Documentation/PCI/endpoint/pci-nvme-function.rst linux-libre-6.16-gnu/Documentation/PCI/endpoint/pci-nvme-function.rst
index df57b8e7d066..a68015317f7f 100644
--- linux-libre-6.15-gnu/Documentation/PCI/endpoint/pci-nvme-function.rst
+++ linux-libre-6.16-gnu/Documentation/PCI/endpoint/pci-nvme-function.rst
@@ -8,6 +8,6 @@ PCI NVMe Function
 
 The PCI NVMe endpoint function implements a PCI NVMe controller using the NVMe
 subsystem target core code. The driver for this function resides with the NVMe
-subsystem as drivers/nvme/target/nvmet-pciep.c.
+subsystem as drivers/nvme/target/pci-epf.c.
 
 See Documentation/nvme/nvme-pci-endpoint-target.rst for more details.
diff --git linux-libre-6.15-gnu/Documentation/PCI/index.rst linux-libre-6.16-gnu/Documentation/PCI/index.rst
index 5e7c4e6e726b..5d720d2a415e 100644
--- linux-libre-6.15-gnu/Documentation/PCI/index.rst
+++ linux-libre-6.16-gnu/Documentation/PCI/index.rst
@@ -17,5 +17,6 @@ PCI Bus Subsystem
    pci-error-recovery
    pcieaer-howto
    endpoint/index
+   controller/index
    boot-interrupts
    tph
diff --git linux-libre-6.15-gnu/Documentation/PCI/pcieaer-howto.rst linux-libre-6.16-gnu/Documentation/PCI/pcieaer-howto.rst
index f013f3b27c82..4b71e2f43ca7 100644
--- linux-libre-6.15-gnu/Documentation/PCI/pcieaer-howto.rst
+++ linux-libre-6.16-gnu/Documentation/PCI/pcieaer-howto.rst
@@ -85,12 +85,27 @@ In the example, 'Requester ID' means the ID of the device that sent
 the error message to the Root Port. Please refer to PCIe specs for other
 fields.
 
+AER Ratelimits
+--------------
+
+Since error messages can be generated for each transaction, we may see
+large volumes of errors reported. To prevent spammy devices from flooding
+the console/stalling execution, messages are throttled by device and error
+type (correctable vs. non-fatal uncorrectable).  Fatal errors, including
+DPC errors, are not ratelimited.
+
+AER uses the default ratelimit of DEFAULT_RATELIMIT_BURST (10 events) over
+DEFAULT_RATELIMIT_INTERVAL (5 seconds).
+
+Ratelimits are exposed in the form of sysfs attributes and configurable.
+See Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
+
 AER Statistics / Counters
 -------------------------
 
 When PCIe AER errors are captured, the counters / statistics are also exposed
 in the form of sysfs attributes which are documented at
-Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
 
 Developer Guide
 ===============
diff --git linux-libre-6.15-gnu/Documentation/RCU/listRCU.rst linux-libre-6.16-gnu/Documentation/RCU/listRCU.rst
index ed5c9d8c9afe..d8bb98623c12 100644
--- linux-libre-6.15-gnu/Documentation/RCU/listRCU.rst
+++ linux-libre-6.16-gnu/Documentation/RCU/listRCU.rst
@@ -334,7 +334,7 @@ If the system-call audit module were to ever need to reject stale data, one way
 to accomplish this would be to add a ``deleted`` flag and a ``lock`` spinlock to the
 ``audit_entry`` structure, and modify audit_filter_task() as follows::
 
-	static enum audit_state audit_filter_task(struct task_struct *tsk)
+	static struct audit_entry *audit_filter_task(struct task_struct *tsk, char **key)
 	{
 		struct audit_entry *e;
 		enum audit_state   state;
@@ -346,16 +346,18 @@ to accomplish this would be to add a ``deleted`` flag and a ``lock`` spinlock to
 				if (e->deleted) {
 					spin_unlock(&e->lock);
 					rcu_read_unlock();
-					return AUDIT_BUILD_CONTEXT;
+					return NULL;
 				}
 				rcu_read_unlock();
 				if (state == AUDIT_STATE_RECORD)
 					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
-				return state;
+				/* As long as e->lock is held, e is valid and
+				 * its value is not stale */
+				return e;
 			}
 		}
 		rcu_read_unlock();
-		return AUDIT_BUILD_CONTEXT;
+		return NULL;
 	}
 
 The ``audit_del_rule()`` function would need to set the ``deleted`` flag under the
diff --git linux-libre-6.15-gnu/Documentation/RCU/whatisRCU.rst linux-libre-6.16-gnu/Documentation/RCU/whatisRCU.rst
index 53faeed7c190..be2eb6be16ec 100644
--- linux-libre-6.15-gnu/Documentation/RCU/whatisRCU.rst
+++ linux-libre-6.16-gnu/Documentation/RCU/whatisRCU.rst
@@ -15,6 +15,9 @@ to start learning about RCU:
 |	2014 Big API Table           https://lwn.net/Articles/609973/
 | 6.	The RCU API, 2019 Edition    https://lwn.net/Articles/777036/
 |	2019 Big API Table           https://lwn.net/Articles/777165/
+| 7.	The RCU API, 2024 Edition    https://lwn.net/Articles/988638/
+|       2024 Background Information  https://lwn.net/Articles/988641/
+|	2024 Big API Table           https://lwn.net/Articles/988666/
 
 For those preferring video:
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/LSM/ipe.rst linux-libre-6.16-gnu/Documentation/admin-guide/LSM/ipe.rst
index f93a467db628..dc7088451f9d 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/LSM/ipe.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/LSM/ipe.rst
@@ -423,7 +423,7 @@ Field descriptions:
 
 Event Example::
 
-   type=1422 audit(1653425529.927:53): policy_name="boot_verified" policy_version=0.0.0 policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB auid=4294967295 ses=4294967295 lsm=ipe res=1
+   type=1422 audit(1653425529.927:53): policy_name="boot_verified" policy_version=0.0.0 policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD8EED7B8F4DB auid=4294967295 ses=4294967295 lsm=ipe res=1 errno=0
    type=1300 audit(1653425529.927:53): arch=c000003e syscall=1 success=yes exit=2567 a0=3 a1=5596fcae1fb0 a2=a07 a3=2 items=0 ppid=184 pid=229 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 ses=4294967295 comm="python3" exe="/usr/bin/python3.10" key=(null)
    type=1327 audit(1653425529.927:53): PROCTITLE proctitle=707974686F6E3300746573742F6D61696E2E7079002D66002E2E
 
@@ -433,24 +433,55 @@ This record will always be emitted in conjunction with a ``AUDITSYSCALL`` record
 
 Field descriptions:
 
-+----------------+------------+-----------+---------------------------------------------------+
-| Field          | Value Type | Optional? | Description of Value                              |
-+================+============+===========+===================================================+
-| policy_name    | string     | No        | The policy_name                                   |
-+----------------+------------+-----------+---------------------------------------------------+
-| policy_version | string     | No        | The policy_version                                |
-+----------------+------------+-----------+---------------------------------------------------+
-| policy_digest  | string     | No        | The policy hash                                   |
-+----------------+------------+-----------+---------------------------------------------------+
-| auid           | integer    | No        | The login user ID                                 |
-+----------------+------------+-----------+---------------------------------------------------+
-| ses            | integer    | No        | The login session ID                              |
-+----------------+------------+-----------+---------------------------------------------------+
-| lsm            | string     | No        | The lsm name associated with the event            |
-+----------------+------------+-----------+---------------------------------------------------+
-| res            | integer    | No        | The result of the audited operation(success/fail) |
-+----------------+------------+-----------+---------------------------------------------------+
-
++----------------+------------+-----------+-------------------------------------------------------------+
+| Field          | Value Type | Optional? | Description of Value                                        |
++================+============+===========+=============================================================+
+| policy_name    | string     | Yes       | The policy_name                                             |
++----------------+------------+-----------+-------------------------------------------------------------+
+| policy_version | string     | Yes       | The policy_version                                          |
++----------------+------------+-----------+-------------------------------------------------------------+
+| policy_digest  | string     | Yes       | The policy hash                                             |
++----------------+------------+-----------+-------------------------------------------------------------+
+| auid           | integer    | No        | The login user ID                                           |
++----------------+------------+-----------+-------------------------------------------------------------+
+| ses            | integer    | No        | The login session ID                                        |
++----------------+------------+-----------+-------------------------------------------------------------+
+| lsm            | string     | No        | The lsm name associated with the event                      |
++----------------+------------+-----------+-------------------------------------------------------------+
+| res            | integer    | No        | The result of the audited operation(success/fail)           |
++----------------+------------+-----------+-------------------------------------------------------------+
+| errno          | integer    | No        | Error code from policy loading operations (see table below) |
++----------------+------------+-----------+-------------------------------------------------------------+
+
+Policy error codes (errno):
+
+The following table lists the error codes that may appear in the errno field while loading or updating the policy:
+
++----------------+--------------------------------------------------------+
+| Error Code     | Description                                            |
++================+========================================================+
+| 0              | Success                                                |
++----------------+--------------------------------------------------------+
+| -EPERM         | Insufficient permission                                |
++----------------+--------------------------------------------------------+
+| -EEXIST        | Same name policy already deployed                      |
++----------------+--------------------------------------------------------+
+| -EBADMSG       | Policy is invalid                                      |
++----------------+--------------------------------------------------------+
+| -ENOMEM        | Out of memory (OOM)                                    |
++----------------+--------------------------------------------------------+
+| -ERANGE        | Policy version number overflow                         |
++----------------+--------------------------------------------------------+
+| -EINVAL        | Policy version parsing error                           |
++----------------+--------------------------------------------------------+
+| -ENOKEY        | Key used to sign the IPE policy not found in keyring   |
++----------------+--------------------------------------------------------+
+| -EKEYREJECTED  | Policy signature verification failed                   |
++----------------+--------------------------------------------------------+
+| -ESTALE        | Attempting to update an IPE policy with older version  |
++----------------+--------------------------------------------------------+
+| -ENOENT        | Policy was deleted while updating                      |
++----------------+--------------------------------------------------------+
 
 1404 AUDIT_MAC_STATUS
 ^^^^^^^^^^^^^^^^^^^^^
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/README.rst linux-libre-6.16-gnu/Documentation/admin-guide/README.rst
index c50623ed41eb..64aafb51a7cf 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/README.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/README.rst
@@ -297,7 +297,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 5.1 available.
+ - Make sure you have at least gcc 8.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
  - Do a ``make`` to create a compressed kernel image. It is also possible to do
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/blockdev/index.rst linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/index.rst
index 957ccf617797..3262397ebe8f 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/blockdev/index.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/index.rst
@@ -11,6 +11,7 @@ Block Devices
    nbd
    paride
    ramdisk
+   zoned_loop
    zram
 
    drbd/index
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/blockdev/zoned_loop.rst linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/zoned_loop.rst
new file mode 100644
index 000000000000..9c7aa3b482f3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/zoned_loop.rst
@@ -0,0 +1,169 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Zoned Loop Block Device
+=======================
+
+.. Contents:
+
+	1) Overview
+	2) Creating a Zoned Device
+	3) Deleting a Zoned Device
+	4) Example
+
+
+1) Overview
+-----------
+
+The zoned loop block device driver (zloop) allows a user to create a zoned block
+device using one regular file per zone as backing storage. This driver does not
+directly control any hardware and uses read, write and truncate operations to
+regular files of a file system to emulate a zoned block device.
+
+Using zloop, zoned block devices with a configurable capacity, zone size and
+number of conventional zones can be created. The storage for each zone of the
+device is implemented using a regular file with a maximum size equal to the zone
+size. The size of a file backing a conventional zone is always equal to the zone
+size. The size of a file backing a sequential zone indicates the amount of data
+sequentially written to the file, that is, the size of the file directly
+indicates the position of the write pointer of the zone.
+
+When resetting a sequential zone, its backing file size is truncated to zero.
+Conversely, for a zone finish operation, the backing file is truncated to the
+zone size. With this, the maximum capacity of a zloop zoned block device created
+can be larger configured to be larger than the storage space available on the
+backing file system. Of course, for such configuration, writing more data than
+the storage space available on the backing file system will result in write
+errors.
+
+The zoned loop block device driver implements a complete zone transition state
+machine. That is, zones can be empty, implicitly opened, explicitly opened,
+closed or full. The current implementation does not support any limits on the
+maximum number of open and active zones.
+
+No user tools are necessary to create and delete zloop devices.
+
+2) Creating a Zoned Device
+--------------------------
+
+Once the zloop module is loaded (or if zloop is compiled in the kernel), the
+character device file /dev/zloop-control can be used to add a zloop device.
+This is done by writing an "add" command directly to the /dev/zloop-control
+device::
+
+	$ modprobe zloop
+        $ ls -l /dev/zloop*
+        crw-------. 1 root root 10, 123 Jan  6 19:18 /dev/zloop-control
+
+        $ mkdir -p <base directory/<device ID>
+        $ echo "add [options]" > /dev/zloop-control
+
+The options available for the add command can be listed by reading the
+/dev/zloop-control device::
+
+	$ cat /dev/zloop-control
+        add id=%d,capacity_mb=%u,zone_size_mb=%u,zone_capacity_mb=%u,conv_zones=%u,base_dir=%s,nr_queues=%u,queue_depth=%u,buffered_io
+        remove id=%d
+
+In more details, the options that can be used with the "add" command are as
+follows.
+
+================   ===========================================================
+id                 Device number (the X in /dev/zloopX).
+                   Default: automatically assigned.
+capacity_mb        Device total capacity in MiB. This is always rounded up to
+                   the nearest higher multiple of the zone size.
+                   Default: 16384 MiB (16 GiB).
+zone_size_mb       Device zone size in MiB. Default: 256 MiB.
+zone_capacity_mb   Device zone capacity (must always be equal to or lower than
+                   the zone size. Default: zone size.
+conv_zones         Total number of conventioanl zones starting from sector 0.
+                   Default: 8.
+base_dir           Path to the base directoy where to create the directory
+                   containing the zone files of the device.
+                   Default=/var/local/zloop.
+                   The device directory containing the zone files is always
+                   named with the device ID. E.g. the default zone file
+                   directory for /dev/zloop0 is /var/local/zloop/0.
+nr_queues          Number of I/O queues of the zoned block device. This value is
+                   always capped by the number of online CPUs
+                   Default: 1
+queue_depth        Maximum I/O queue depth per I/O queue.
+                   Default: 64
+buffered_io        Do buffered IOs instead of direct IOs (default: false)
+================   ===========================================================
+
+3) Deleting a Zoned Device
+--------------------------
+
+Deleting an unused zoned loop block device is done by issuing the "remove"
+command to /dev/zloop-control, specifying the ID of the device to remove::
+
+        $ echo "remove id=X" > /dev/zloop-control
+
+The remove command does not have any option.
+
+A zoned device that was removed can be re-added again without any change to the
+state of the device zones: the device zones are restored to their last state
+before the device was removed. Adding again a zoned device after it was removed
+must always be done using the same configuration as when the device was first
+added. If a zone configuration change is detected, an error will be returned and
+the zoned device will not be created.
+
+To fully delete a zoned device, after executing the remove operation, the device
+base directory containing the backing files of the device zones must be deleted.
+
+4) Example
+----------
+
+The following sequence of commands creates a 2GB zoned device with zones of 64
+MB and a zone capacity of 63 MB::
+
+        $ modprobe zloop
+        $ mkdir -p /var/local/zloop/0
+        $ echo "add capacity_mb=2048,zone_size_mb=64,zone_capacity=63MB" > /dev/zloop-control
+
+For the device created (/dev/zloop0), the zone backing files are all created
+under the default base directory (/var/local/zloop)::
+
+        $ ls -l /var/local/zloop/0
+        total 0
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000000
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000001
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000002
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000003
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000004
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000005
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000006
+        -rw-------. 1 root root 67108864 Jan  6 22:23 cnv-000007
+        -rw-------. 1 root root        0 Jan  6 22:23 seq-000008
+        -rw-------. 1 root root        0 Jan  6 22:23 seq-000009
+        ...
+
+The zoned device created (/dev/zloop0) can then be used normally::
+
+        $ lsblk -z
+        NAME   ZONED        ZONE-SZ ZONE-NR ZONE-AMAX ZONE-OMAX ZONE-APP ZONE-WGRAN
+        zloop0 host-managed     64M      32         0         0       1M         4K
+        $ blkzone report /dev/zloop0
+          start: 0x000000000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x000020000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x000040000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x000060000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x000080000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x0000a0000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x0000c0000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x0000e0000, len 0x020000, cap 0x020000, wptr 0x000000 reset:0 non-seq:0, zcond: 0(nw) [type: 1(CONVENTIONAL)]
+          start: 0x000100000, len 0x020000, cap 0x01f800, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
+          start: 0x000120000, len 0x020000, cap 0x01f800, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
+          ...
+
+Deleting this device is done using the command::
+
+        $ echo "remove id=0" > /dev/zloop-control
+
+The removed device can be re-added again using the same "add" command as when
+the device was first created. To fully delete a zoned device, its backing files
+should also be deleted after executing the remove command::
+
+        $ rm -r /var/local/zloop/0
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/blockdev/zram.rst linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/zram.rst
index 9bdb30901a93..3e273c1bb749 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/blockdev/zram.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/blockdev/zram.rst
@@ -317,6 +317,26 @@ a single line of text and contains the following stats separated by whitespace:
 Optional Feature
 ================
 
+IDLE pages tracking
+-------------------
+
+zram has built-in support for idle pages tracking (that is, allocated but
+not used pages). This feature is useful for e.g. zram writeback and
+recompression. In order to mark pages as idle, execute the following command::
+
+	echo all > /sys/block/zramX/idle
+
+This will mark all allocated zram pages as idle. The idle mark will be
+removed only when the page (block) is accessed (e.g. overwritten or freed).
+Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled, pages can be
+marked as idle based on how many seconds have passed since the last access to
+a particular zram page::
+
+	echo 86400 > /sys/block/zramX/idle
+
+In this example, all pages which haven't been accessed in more than 86400
+seconds (one day) will be marked idle.
+
 writeback
 ---------
 
@@ -331,24 +351,7 @@ If admin wants to use incompressible page writeback, they could do it via::
 
 	echo huge > /sys/block/zramX/writeback
 
-To use idle page writeback, first, user need to declare zram pages
-as idle::
-
-	echo all > /sys/block/zramX/idle
-
-From now on, any pages on zram are idle pages. The idle mark
-will be removed until someone requests access of the block.
-IOW, unless there is access request, those pages are still idle pages.
-Additionally, when CONFIG_ZRAM_TRACK_ENTRY_ACTIME is enabled pages can be
-marked as idle based on how long (in seconds) it's been since they were
-last accessed::
-
-        echo 86400 > /sys/block/zramX/idle
-
-In this example all pages which haven't been accessed in more than 86400
-seconds (one day) will be marked idle.
-
-Admin can request writeback of those idle pages at right timing via::
+Admin can request writeback of idle pages at right timing via::
 
 	echo idle > /sys/block/zramX/writeback
 
@@ -369,6 +372,23 @@ they could write a page index into the interface::
 
 	echo "page_index=1251" > /sys/block/zramX/writeback
 
+In Linux 6.16 this interface underwent some rework.  First, the interface
+now supports `key=value` format for all of its parameters (`type=huge_idle`,
+etc.)  Second, the support for `page_indexes` was introduced, which specify
+`LOW-HIGH` range (or ranges) of pages to be written-back.  This reduces the
+number of syscalls, but more importantly this enables optimal post-processing
+target selection strategy. Usage example::
+
+	echo "type=idle" > /sys/block/zramX/writeback
+	echo "page_indexes=1-100 page_indexes=200-300" > \
+		/sys/block/zramX/writeback
+
+We also now permit multiple page_index params per call and a mix of
+single pages and page ranges::
+
+	echo page_index=42 page_index=99 page_indexes=100-200 \
+		page_indexes=500-700 > /sys/block/zramX/writeback
+
 If there are lots of write IO with flash device, potentially, it has
 flash wearout problem so that admin needs to design write limitation
 to guarantee storage health for entire product life.
@@ -482,8 +502,6 @@ attempt to recompress:::
 
 	echo "type=huge_idle max_pages=42" > /sys/block/zramX/recompress
 
-Recompression of idle pages requires memory tracking.
-
 During re-compression for every page, that matches re-compression criteria,
 ZRAM iterates the list of registered alternative compression algorithms in
 order of their priorities. ZRAM stops either when re-compression was
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/bug-hunting.rst linux-libre-6.16-gnu/Documentation/admin-guide/bug-hunting.rst
index ce6f4e8ca487..30858757c9f2 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/bug-hunting.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/bug-hunting.rst
@@ -196,7 +196,7 @@ will see the assembler code for the routine shown, but if your kernel has
 debug symbols the C code will also be available. (Debug symbols can be enabled
 in the kernel hacking menu of the menu configuration.) For example::
 
-    $ objdump -r -S -l --disassemble net/dccp/ipv4.o
+    $ objdump -r -S -l --disassemble net/ipv4/tcp.o
 
 .. note::
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v1/cgroups.rst linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v1/cgroups.rst
index a3e2edb3d274..463f98453323 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v1/cgroups.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v1/cgroups.rst
@@ -13,7 +13,7 @@ Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
 
 Modified by Paul Jackson <pj@sgi.com>
 
-Modified by Christoph Lameter <cl@linux.com>
+Modified by Christoph Lameter <cl@gentwo.org>
 
 .. CONTENTS:
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
index f401af5e2f09..c7909e5ac136 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -10,7 +10,7 @@ Written by Simon.Derr@bull.net
 
 - Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
 - Modified by Paul Jackson <pj@sgi.com>
-- Modified by Christoph Lameter <cl@linux.com>
+- Modified by Christoph Lameter <cl@gentwo.org>
 - Modified by Paul Menage <menage@google.com>
 - Modified by Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v2.rst linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v2.rst
index 1a16ce68a4d7..bd98ea3175ec 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/cgroup-v2.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/cgroup-v2.rst
@@ -1076,7 +1076,7 @@ cpufreq governor about the minimum desired frequency which should always be
 provided by a CPU, as well as the maximum desired frequency, which should not
 be exceeded by a CPU.
 
-WARNING: cgroup2 cpu controller doesn't yet fully support the control of
+WARNING: cgroup2 cpu controller doesn't yet support the (bandwidth) control of
 realtime processes. For a kernel built with the CONFIG_RT_GROUP_SCHED option
 enabled for group scheduling of realtime processes, the cpu controller can only
 be enabled when all RT processes are in the root cgroup. Be aware that system
@@ -1095,19 +1095,34 @@ realtime processes irrespective of CONFIG_RT_GROUP_SCHED.
 CPU Interface Files
 ~~~~~~~~~~~~~~~~~~~
 
-All time durations are in microseconds.
+The interaction of a process with the cpu controller depends on its scheduling
+policy and the underlying scheduler. From the point of view of the cpu controller,
+processes can be categorized as follows:
+
+* Processes under the fair-class scheduler
+* Processes under a BPF scheduler with the ``cgroup_set_weight`` callback
+* Everything else: ``SCHED_{FIFO,RR,DEADLINE}`` and processes under a BPF scheduler
+  without the ``cgroup_set_weight`` callback
+
+For details on when a process is under the fair-class scheduler or a BPF scheduler,
+check out :ref:`Documentation/scheduler/sched-ext.rst <sched-ext>`.
+
+For each of the following interface files, the above categories
+will be referred to. All time durations are in microseconds.
 
   cpu.stat
 	A read-only flat-keyed file.
 	This file exists whether the controller is enabled or not.
 
-	It always reports the following three stats:
+	It always reports the following three stats, which account for all the
+	processes in the cgroup:
 
 	- usage_usec
 	- user_usec
 	- system_usec
 
-	and the following five when the controller is enabled:
+	and the following five when the controller is enabled, which account for
+	only the processes under the fair-class scheduler:
 
 	- nr_periods
 	- nr_throttled
@@ -1125,6 +1140,10 @@ All time durations are in microseconds.
 	If the cgroup has been configured to be SCHED_IDLE (cpu.idle = 1),
 	then the weight will show as a 0.
 
+	This file affects only processes under the fair-class scheduler and a BPF
+	scheduler with the ``cgroup_set_weight`` callback depending on what the
+	callback actually does.
+
   cpu.weight.nice
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "0".
@@ -1137,6 +1156,10 @@ All time durations are in microseconds.
 	granularity is coarser for the nice values, the read value is
 	the closest approximation of the current weight.
 
+	This file affects only processes under the fair-class scheduler and a BPF
+	scheduler with the ``cgroup_set_weight`` callback depending on what the
+	callback actually does.
+
   cpu.max
 	A read-write two value file which exists on non-root cgroups.
 	The default is "max 100000".
@@ -1149,43 +1172,55 @@ All time durations are in microseconds.
 	$PERIOD duration.  "max" for $MAX indicates no limit.  If only
 	one number is written, $MAX is updated.
 
+	This file affects only processes under the fair-class scheduler.
+
   cpu.max.burst
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "0".
 
 	The burst in the range [0, $MAX].
 
+	This file affects only processes under the fair-class scheduler.
+
   cpu.pressure
 	A read-write nested-keyed file.
 
 	Shows pressure stall information for CPU. See
 	:ref:`Documentation/accounting/psi.rst <psi>` for details.
 
+	This file accounts for all the processes in the cgroup.
+
   cpu.uclamp.min
-        A read-write single value file which exists on non-root cgroups.
-        The default is "0", i.e. no utilization boosting.
+	A read-write single value file which exists on non-root cgroups.
+	The default is "0", i.e. no utilization boosting.
 
-        The requested minimum utilization (protection) as a percentage
-        rational number, e.g. 12.34 for 12.34%.
+	The requested minimum utilization (protection) as a percentage
+	rational number, e.g. 12.34 for 12.34%.
 
-        This interface allows reading and setting minimum utilization clamp
-        values similar to the sched_setattr(2). This minimum utilization
-        value is used to clamp the task specific minimum utilization clamp.
+	This interface allows reading and setting minimum utilization clamp
+	values similar to the sched_setattr(2). This minimum utilization
+	value is used to clamp the task specific minimum utilization clamp,
+	including those of realtime processes.
 
-        The requested minimum utilization (protection) is always capped by
-        the current value for the maximum utilization (limit), i.e.
-        `cpu.uclamp.max`.
+	The requested minimum utilization (protection) is always capped by
+	the current value for the maximum utilization (limit), i.e.
+	`cpu.uclamp.max`.
+
+	This file affects all the processes in the cgroup.
 
   cpu.uclamp.max
-        A read-write single value file which exists on non-root cgroups.
-        The default is "max". i.e. no utilization capping
+	A read-write single value file which exists on non-root cgroups.
+	The default is "max". i.e. no utilization capping
+
+	The requested maximum utilization (limit) as a percentage rational
+	number, e.g. 98.76 for 98.76%.
 
-        The requested maximum utilization (limit) as a percentage rational
-        number, e.g. 98.76 for 98.76%.
+	This interface allows reading and setting maximum utilization clamp
+	values similar to the sched_setattr(2). This maximum utilization
+	value is used to clamp the task specific maximum utilization clamp,
+	including those of realtime processes.
 
-        This interface allows reading and setting maximum utilization clamp
-        values similar to the sched_setattr(2). This maximum utilization
-        value is used to clamp the task specific maximum utilization clamp.
+	This file affects all the processes in the cgroup.
 
   cpu.idle
 	A read-write single value file which exists on non-root cgroups.
@@ -1197,7 +1232,7 @@ All time durations are in microseconds.
 	own relative priorities, but the cgroup itself will be treated as
 	very low priority relative to its peers.
 
-
+	This file affects only processes under the fair-class scheduler.
 
 Memory
 ------
@@ -1299,6 +1334,18 @@ PAGE_SIZE multiple when read back.
 	monitors the limited cgroup to alleviate heavy reclaim
 	pressure.
 
+	If memory.high is opened with O_NONBLOCK then the synchronous
+	reclaim is bypassed. This is useful for admin processes that
+	need to dynamically adjust the job's memory limits without
+	expending their own CPU resources on memory reclamation. The
+	job will trigger the reclaim and/or get throttled on its
+	next charge request.
+
+	Please note that with O_NONBLOCK, there is a chance that the
+	target memory cgroup may take indefinite amount of time to
+	reduce usage below the limit due to delayed charge request or
+	busy-hitting its memory to slow down reclaim.
+
   memory.max
 	A read-write single value file which exists on non-root
 	cgroups.  The default is "max".
@@ -1316,6 +1363,18 @@ PAGE_SIZE multiple when read back.
 	Caller could retry them differently, return into userspace
 	as -ENOMEM or silently ignore in cases like disk readahead.
 
+	If memory.max is opened with O_NONBLOCK, then the synchronous
+	reclaim and oom-kill are bypassed. This is useful for admin
+	processes that need to dynamically adjust the job's memory limits
+	without expending their own CPU resources on memory reclamation.
+	The job will trigger the reclaim and/or oom-kill on its next
+	charge request.
+
+	Please note that with O_NONBLOCK, there is a chance that the
+	target memory cgroup may take indefinite amount of time to
+	reduce usage below the limit due to delayed charge request or
+	busy-hitting its memory to slow down reclaim.
+
   memory.reclaim
 	A write-only nested-keyed file which exists for all cgroups.
 
@@ -1348,6 +1407,9 @@ The following nested keys are defined.
 	same semantics as vm.swappiness applied to memcg reclaim with
 	all the existing limitations and potential future extensions.
 
+	The valid range for swappiness is [0-200, max], setting
+	swappiness=max exclusively reclaims anonymous memory.
+
   memory.peak
 	A read-write single value file which exists on non-root cgroups.
 
@@ -3019,7 +3081,7 @@ Filesystem Support for Writeback
 --------------------------------
 
 A filesystem can support cgroup writeback by updating
-address_space_operations->writepage[s]() to annotate bio's using the
+address_space_operations->writepages() to annotate bio's using the
 following two functions.
 
   wbc_init_bio(@wbc, @bio)
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-6.16-gnu/Documentation/admin-guide/cifs/usage.rst
index c09674a75a9e..d989ae5778ba 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -270,6 +270,8 @@ configured for Unix Extensions (and the client has not disabled
 illegal Windows/NTFS/SMB characters to a remap range (this mount parameter
 is the default for SMB3). This remap (``mapposix``) range is also
 compatible with Mac (and "Services for Mac" on some older Windows).
+When POSIX Extensions for SMB 3.1.1 are negotiated, remapping is automatically
+disabled.
 
 CIFS VFS Mount Options
 ======================
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/gpio/gpio-aggregator.rst linux-libre-6.16-gnu/Documentation/admin-guide/gpio/gpio-aggregator.rst
index 5cd1e7221756..8374a9df9105 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/gpio/gpio-aggregator.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/gpio/gpio-aggregator.rst
@@ -69,6 +69,113 @@ write-only attribute files in sysfs.
 		    $ echo gpio-aggregator.0 > delete_device
 
 
+Aggregating GPIOs using Configfs
+--------------------------------
+
+**Group:** ``/config/gpio-aggregator``
+
+    This is the root directory of the gpio-aggregator configfs tree.
+
+**Group:** ``/config/gpio-aggregator/<example-name>``
+
+    This directory represents a GPIO aggregator device. You can assign any
+    name to ``<example-name>`` (e.g. ``agg0``), except names starting with
+    ``_sysfs`` prefix, which are reserved for auto-generated configfs
+    entries corresponding to devices created via Sysfs.
+
+**Attribute:** ``/config/gpio-aggregator/<example-name>/live``
+
+    The ``live`` attribute allows to trigger the actual creation of the device
+    once it's fully configured. Accepted values are:
+
+    * ``1``, ``yes``, ``true`` : enable the virtual device
+    * ``0``, ``no``, ``false`` : disable the virtual device
+
+**Attribute:** ``/config/gpio-aggregator/<example-name>/dev_name``
+
+    The read-only ``dev_name`` attribute exposes the name of the device as it
+    will appear in the system on the platform bus (e.g. ``gpio-aggregator.0``).
+    This is useful for identifying a character device for the newly created
+    aggregator. If it's ``gpio-aggregator.0``,
+    ``/sys/devices/platform/gpio-aggregator.0/gpiochipX`` path tells you that the
+    GPIO device id is ``X``.
+
+You must create subdirectories for each virtual line you want to
+instantiate, named exactly as ``line0``, ``line1``, ..., ``lineY``, when
+you want to instantiate ``Y+1`` (Y >= 0) lines.  Configure all lines before
+activating the device by setting ``live`` to 1.
+
+**Group:** ``/config/gpio-aggregator/<example-name>/<lineY>/``
+
+    This directory represents a GPIO line to include in the aggregator.
+
+**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/key``
+
+**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/offset``
+
+    The default values after creating the ``<lineY>`` directory are:
+
+    * ``key`` : <empty>
+    * ``offset`` : -1
+
+    ``key`` must always be explicitly configured, while ``offset`` depends.
+    Two configuration patterns exist for each ``<lineY>``:
+
+    (a). For lookup by GPIO line name:
+
+         * Set ``key`` to the line name.
+         * Ensure ``offset`` remains -1 (the default).
+
+    (b). For lookup by GPIO chip name and the line offset within the chip:
+
+         * Set ``key`` to the chip name.
+         * Set ``offset`` to the line offset (0 <= ``offset`` < 65535).
+
+**Attribute:** ``/config/gpio-aggregator/<example-name>/<lineY>/name``
+
+    The ``name`` attribute sets a custom name for lineY. If left unset, the
+    line will remain unnamed.
+
+Once the configuration is done, the ``'live'`` attribute must be set to 1
+in order to instantiate the aggregator device. It can be set back to 0 to
+destroy the virtual device. The module will synchronously wait for the new
+aggregator device to be successfully probed and if this doesn't happen, writing
+to ``'live'`` will result in an error. This is a different behaviour from the
+case when you create it using sysfs ``new_device`` interface.
+
+.. note::
+
+   For aggregators created via Sysfs, the configfs entries are
+   auto-generated and appear as ``/config/gpio-aggregator/_sysfs.<N>/``. You
+   cannot add or remove line directories with mkdir(2)/rmdir(2). To modify
+   lines, you must use the "delete_device" interface to tear down the
+   existing device and reconfigure it from scratch. However, you can still
+   toggle the aggregator with the ``live`` attribute and adjust the
+   ``key``, ``offset``, and ``name`` attributes for each line when ``live``
+   is set to 0 by hand (i.e. it's not waiting for deferred probe).
+
+Sample configuration commands
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: sh
+
+    # Create a directory for an aggregator device
+    $ mkdir /sys/kernel/config/gpio-aggregator/agg0
+
+    # Configure each line
+    $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line0
+    $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line0/key
+    $ echo 6         > /sys/kernel/config/gpio-aggregator/agg0/line0/offset
+    $ echo test0     > /sys/kernel/config/gpio-aggregator/agg0/line0/name
+    $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line1
+    $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line1/key
+    $ echo 7         > /sys/kernel/config/gpio-aggregator/agg0/line1/offset
+    $ echo test1     > /sys/kernel/config/gpio-aggregator/agg0/line1/name
+
+    # Activate the aggregator device
+    $ echo 1         > /sys/kernel/config/gpio-aggregator/agg0/live
+
+
 Generic GPIO Driver
 -------------------
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/hw-vuln/index.rst linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/index.rst
index ce296b8430fc..09890a8f3ee9 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/index.rst
@@ -23,4 +23,5 @@ are configurable at compile, boot or run time.
    gather_data_sampling
    reg-file-data-sampling
    rsb
+   old_microcode
    indirect-target-selection
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/hw-vuln/old_microcode.rst linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/old_microcode.rst
new file mode 100644
index 000000000000..e940ed2d030d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/old_microcode.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Old Microcode
+=============
+
+The kernel keeps a table of released microcode. Systems that had
+microcode older than this at boot will say "Vulnerable".  This means
+that the system was vulnerable to some known CPU issue. It could be
+security or functional, the kernel does not know or care.
+
+/*(DEBLOBBED)*/
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
index 1302fd1b55e8..6dba18dbb9ab 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -157,9 +157,7 @@ This is achieved by using the otherwise unused and obsolete VERW instruction in
 combination with a microcode update. The microcode clears the affected CPU
 buffers when the VERW instruction is executed.
 
-Kernel reuses the MDS function to invoke the buffer clearing:
-
-	mds_clear_cpu_buffers()
+Kernel does the buffer clearing with x86_clear_cpu_buffers().
 
 On MDS affected CPUs, the kernel already invokes CPU buffer clear on
 kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/kdump/kdump.rst linux-libre-6.16-gnu/Documentation/admin-guide/kdump/kdump.rst
index 1f7f14c6e184..20fabdf6567e 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/kdump/kdump.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/kdump/kdump.rst
@@ -547,6 +547,38 @@ from within add_taint() whenever the value set in this bitmask matches with the
 bit flag being set by add_taint().
 This will cause a kdump to occur at the add_taint()->panic() call.
 
+Write the dump file to encrypted disk volume
+============================================
+
+CONFIG_CRASH_DM_CRYPT can be enabled to support saving the dump file to an
+encrypted disk volume (only x86_64 supported for now). User space can interact
+with /sys/kernel/config/crash_dm_crypt_keys for setup,
+
+1. Tell the first kernel what logon keys are needed to unlock the disk volumes,
+    # Add key #1
+    mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720
+    # Add key #1's description
+    echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description
+
+    # how many keys do we have now?
+    cat /sys/kernel/config/crash_dm_crypt_keys/count
+    1
+
+    # Add key #2 in the same way
+
+    # how many keys do we have now?
+    cat /sys/kernel/config/crash_dm_crypt_keys/count
+    2
+
+    # To support CPU/memory hot-plugging, re-use keys already saved to reserved
+    # memory
+    echo true > /sys/kernel/config/crash_dm_crypt_key/reuse
+
+2. Load the dump-capture kernel
+
+3. After the dump-capture kerne get booted, restore the keys to user keyring
+   echo yes > /sys/kernel/crash_dm_crypt_keys/restore
+
 Contact
 =======
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst linux-libre-6.16-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 0f714fc945ac..8cf4614385b7 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -331,8 +331,8 @@ PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|P
 Page attributes. These flags are used to filter various unnecessary for
 dumping pages.
 
-PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
------------------------------------------------------------------------------
+PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_unaccepted)
+-------------------------------------------------------------------------------------------------------------------------
 
 More page attributes. These flags are used to filter various unnecessary for
 dumping pages.
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-6.16-gnu/Documentation/admin-guide/kernel-parameters.txt
index 8f75ec177399..07e22ba5bfe3 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-6.16-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -458,6 +458,9 @@
 	arm64.nomops	[ARM64] Unconditionally disable Memory Copy and Memory
 			Set instructions support
 
+	arm64.nompam	[ARM64] Unconditionally disable Memory Partitioning And
+			Monitoring support
+
 	arm64.nomte	[ARM64] Unconditionally disable Memory Tagging Extension
 			support
 
@@ -1828,6 +1831,13 @@
 				lz4: Select LZ4 compression algorithm to
 				compress/decompress hibernation image.
 
+	hibernate.pm_test_delay=
+			[HIBERNATION]
+			Sets the number of seconds to remain in a hibernation test
+			mode before resuming the system (see
+			/sys/power/pm_test). Only available when CONFIG_PM_DEBUG
+			is set. Default value is 5.
+
 	highmem=nn[KMG]	[KNL,BOOT,EARLY] forces the highmem zone to have an exact
 			size of <nn>. This works even on boxes that have no
 			highmem otherwise. This also works to reduce highmem
@@ -2742,6 +2752,31 @@
 	kgdbwait	[KGDB,EARLY] Stop kernel execution and enter the
 			kernel debugger at the earliest opportunity.
 
+	kho=		[KEXEC,EARLY]
+			Format: { "0" | "1" | "off" | "on" | "y" | "n" }
+			Enables or disables Kexec HandOver.
+			"0" | "off" | "n" - kexec handover is disabled
+			"1" | "on" | "y" - kexec handover is enabled
+
+	kho_scratch=	[KEXEC,EARLY]
+			Format: ll[KMG],mm[KMG],nn[KMG] | nn%
+			Defines the size of the KHO scratch region. The KHO
+			scratch regions are physically contiguous memory
+			ranges that can only be used for non-kernel
+			allocations. That way, even when memory is heavily
+			fragmented with handed over memory, the kexeced
+			kernel will always have enough contiguous ranges to
+			bootstrap itself.
+
+			It is possible to specify the exact amount of
+			memory in the form of "ll[KMG],mm[KMG],nn[KMG]"
+			where the first parameter defines the size of a low
+			memory scratch area, the second parameter defines
+			the size of a global scratch area and the third
+			parameter defines the size of additional per-node
+			scratch areas.  The form "nn%" defines scale factor
+			(in percents) of memory that was used during boot.
+
 	kmac=		[MIPS] Korina ethernet MAC address.
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
@@ -5672,6 +5707,31 @@
 			are zero, rcutorture acts as if is interpreted
 			they are all non-zero.
 
+	rcutorture.gpwrap_lag= [KNL]
+			Enable grace-period wrap lag testing. Setting
+			to false prevents the gpwrap lag test from
+			running. Default is true.
+
+	rcutorture.gpwrap_lag_gps= [KNL]
+			Set the value for grace-period wrap lag during
+			active lag testing periods. This controls how many
+			grace periods differences we tolerate between
+			rdp and rnp's gp_seq before setting overflow flag.
+			The default is always set to 8.
+
+	rcutorture.gpwrap_lag_cycle_mins= [KNL]
+			Set the total cycle duration for gpwrap lag
+			testing in minutes. This is the total time for
+			one complete cycle of active and inactive
+			testing periods. Default is 30 minutes.
+
+	rcutorture.gpwrap_lag_active_mins= [KNL]
+			Set the duration for which gpwrap lag is active
+			within each cycle, in minutes. During this time,
+			the grace-period wrap lag will be set to the
+			value specified by gpwrap_lag_gps. Default is
+			5 minutes.
+
 	rcutorture.irqreader= [KNL]
 			Run RCU readers from irq handlers, or, more
 			accurately, from a timer handler.  Not all RCU
@@ -6268,7 +6328,7 @@
 			port and the regular usb controller gets disabled.
 
 	root=		[KNL] Root filesystem
-			Usually this a a block device specifier of some kind,
+			Usually this is a block device specifier of some kind,
 			see the early_lookup_bdev comment in
 			block/early-lookup.c for details.
 			Alternatively this can be "ram" for the legacy initial
@@ -6295,6 +6355,11 @@
 			Memory area to be used by remote processor image,
 			managed by CMA.
 
+	rt_group_sched=	[KNL] Enable or disable SCHED_RR/FIFO group scheduling
+			when CONFIG_RT_GROUP_SCHED=y. Defaults to
+			!CONFIG_RT_GROUP_SCHED_DEFAULT_DISABLED.
+			Format: <bool>
+
 	rw		[KNL] Mount root device read-write on boot
 
 	S		[KNL] Run init in single mode
@@ -7423,6 +7488,19 @@
 			having this key zero'ed is acceptable. E.g. in testing
 			scenarios.
 
+	tsa=		[X86] Control mitigation for Transient Scheduler
+			Attacks on AMD CPUs. Search the following in your
+			favourite search engine for more details:
+
+			"Technical guidance for mitigating transient scheduler
+			attacks".
+
+			off		- disable the mitigation
+			on		- enable the mitigation (default)
+			user		- mitigate only user/kernel transitions
+			vm		- mitigate only guest/host transitions
+
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/laptops/alienware-wmi.rst linux-libre-6.16-gnu/Documentation/admin-guide/laptops/alienware-wmi.rst
new file mode 100644
index 000000000000..27a32a8057da
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/laptops/alienware-wmi.rst
@@ -0,0 +1,127 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+====================
+Alienware WMI Driver
+====================
+
+Kurt Borja <kuurtb@gmail.com>
+
+This is a driver for the "WMAX" WMI device, which is found in most Dell gaming
+laptops and controls various special features.
+
+Before the launch of M-Series laptops (~2018), the "WMAX" device controlled
+basic RGB lighting, deep sleep mode, HDMI mode and amplifier status.
+
+Later, this device was completely repurpused. Now it mostly deals with thermal
+profiles, sensor monitoring and overclocking. This interface is named "AWCC" and
+is known to be used by the AWCC OEM application to control these features.
+
+The alienware-wmi driver controls both interfaces.
+
+AWCC Interface
+==============
+
+WMI device documentation: Documentation/wmi/devices/alienware-wmi.rst
+
+Supported devices
+-----------------
+
+- Alienware M-Series laptops
+- Alienware X-Series laptops
+- Alienware Aurora Desktops
+- Dell G-Series laptops
+
+If you believe your device supports the AWCC interface and you don't have any of
+the features described in this document, try the following alienware-wmi module
+parameters:
+
+- ``force_platform_profile=1``: Forces probing for platform profile support
+- ``force_hwmon=1``: Forces probing for HWMON support
+
+If the module loads successfully with these parameters, consider submitting a
+patch adding your model to the ``awcc_dmi_table`` located in
+``drivers/platform/x86/dell/alienware-wmi-wmax.c`` or contacting the maintainer
+for further guidance.
+
+Status
+------
+
+The following features are currently supported:
+
+- :ref:`Platform Profile <platform-profile>`:
+
+  - Thermal profile control
+
+  - G-Mode toggling
+
+- :ref:`HWMON <hwmon>`:
+
+  - Sensor monitoring
+
+  - Manual fan control
+
+.. _platform-profile:
+
+Platform Profile
+----------------
+
+The AWCC interface exposes various firmware defined thermal profiles. These are
+exposed to user-space through the Platform Profile class interface. Refer to
+:ref:`sysfs-class-platform-profile <abi_file_testing_sysfs_class_platform_profile>`
+for more information.
+
+The name of the platform-profile class device exported by this driver is
+"alienware-wmi" and it's path can be found with:
+
+::
+
+ grep -l "alienware-wmi" /sys/class/platform-profile/platform-profile-*/name | sed 's|/[^/]*$||'
+
+If the device supports G-Mode, it is also toggled when selecting the
+``performance`` profile.
+
+.. note::
+   You may set the ``force_gmode`` module parameter to always try to toggle this
+   feature, without checking if your model supports it.
+
+.. _hwmon:
+
+HWMON
+-----
+
+The AWCC interface also supports sensor monitoring and manual fan control. Both
+of these features are exposed to user-space through the HWMON interface.
+
+The name of the hwmon class device exported by this driver is "alienware_wmi"
+and it's path can be found with:
+
+::
+
+ grep -l "alienware_wmi" /sys/class/hwmon/hwmon*/name | sed 's|/[^/]*$||'
+
+Sensor monitoring is done through the standard HWMON interface. Refer to
+:ref:`sysfs-class-hwmon <abi_file_testing_sysfs_class_hwmon>` for more
+information.
+
+Manual fan control on the other hand, is not exposed directly by the AWCC
+interface. Instead it let's us control a fan `boost` value. This `boost` value
+has the following aproximate behavior over the fan pwm:
+
+::
+
+ pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
+
+Due to the above behavior, the fan `boost` control is exposed to user-space
+through the following, custom hwmon sysfs attribute:
+
+=============================== ======= =======================================
+Name				Perm	Description
+=============================== ======= =======================================
+fan[1-4]_boost			RW	Fan boost value.
+
+					Integer value between 0 and 255
+=============================== ======= =======================================
+
+.. note::
+   In some devices, manual fan control only works reliably if the ``custom``
+   platform profile is selected.
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/laptops/index.rst linux-libre-6.16-gnu/Documentation/admin-guide/laptops/index.rst
index e71c8984c23e..db842b629303 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/laptops/index.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/laptops/index.rst
@@ -7,6 +7,7 @@ Laptop Drivers
 .. toctree::
    :maxdepth: 1
 
+   alienware-wmi
    asus-laptop
    disk-shock-protection
    laptop-mode
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/media/c3-isp.dot linux-libre-6.16-gnu/Documentation/admin-guide/media/c3-isp.dot
new file mode 100644
index 000000000000..42dc931ee84a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/media/c3-isp.dot
@@ -0,0 +1,26 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0 | <port1> 1} | c3-isp-core\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3 | <port4> 4 | <port5> 5}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port3 -> n00000008:port0
+	n00000001:port4 -> n0000000b:port0
+	n00000001:port5 -> n0000000e:port0
+	n00000001:port2 -> n00000027
+	n00000008 [label="{{<port0> 0} | c3-isp-resizer0\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000008:port1 -> n00000016 [style=bold]
+	n0000000b [label="{{<port0> 0} | c3-isp-resizer1\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000b:port1 -> n0000001a [style=bold]
+	n0000000e [label="{{<port0> 0} | c3-isp-resizer2\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000e:port1 -> n00000023 [style=bold]
+	n00000011 [label="{{<port0> 0} | c3-mipi-adapter\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000011:port1 -> n00000001:port0 [style=bold]
+	n00000016 [label="c3-isp-cap0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000001a [label="c3-isp-cap1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n0000001e [label="{{<port0> 0} | c3-mipi-csi2\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000001e:port1 -> n00000011:port0 [style=bold]
+	n00000023 [label="c3-isp-cap2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n00000027 [label="c3-isp-stats\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n0000002b [label="c3-isp-params\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
+	n0000002b -> n00000001:port1
+	n0000003f [label="{{} | imx290 2-001a\n/dev/v4l-subdev6 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000003f:port0 -> n0000001e:port0 [style=bold]
+}
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/media/c3-isp.rst linux-libre-6.16-gnu/Documentation/admin-guide/media/c3-isp.rst
new file mode 100644
index 000000000000..ac508b8c6831
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/media/c3-isp.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+
+.. include:: <isonum.txt>
+
+=================================================
+Amlogic C3 Image Signal Processing (C3ISP) driver
+=================================================
+
+Introduction
+============
+
+This file documents the Amlogic C3ISP driver located under
+drivers/media/platform/amlogic/c3/isp.
+
+The current version of the driver supports the C3ISP found on
+Amlogic C308L processor.
+
+The driver implements V4L2, Media controller and V4L2 subdev interfaces.
+Camera sensor using V4L2 subdev interface in the kernel is supported.
+
+The driver has been tested on AW419-C308L-Socket platform.
+
+Amlogic C3 ISP
+==============
+
+The Camera hardware found on C308L processors and supported by
+the driver consists of:
+
+- 1 MIPI-CSI-2 module: handles the physical layer of the MIPI CSI-2 receiver and
+  receives data from the connected camera sensor.
+- 1 MIPI-ADAPTER module: organizes MIPI data to meet ISP input requirements and
+  send MIPI data to ISP.
+- 1 ISP (Image Signal Processing) module: contains a pipeline of image processing
+  hardware blocks. The ISP pipeline contains three resizers at the end each of
+  them connected to a DMA interface which writes the output data to memory.
+
+A high-level functional view of the C3 ISP is presented below.::
+
+                                                                   +----------+    +-------+
+                                                                   | Resizer  |--->| WRMIF |
+  +---------+    +------------+    +--------------+    +-------+   |----------+    +-------+
+  | Sensor  |--->| MIPI CSI-2 |--->| MIPI ADAPTER |--->|  ISP  |---|----------+    +-------+
+  +---------+    +------------+    +--------------+    +-------+   | Resizer  |--->| WRMIF |
+                                                                   +----------+    +-------+
+                                                                   |----------+    +-------+
+                                                                   | Resizer  |--->| WRMIF |
+                                                                   +----------+    +-------+
+
+Driver architecture and design
+==============================
+
+With the goal to model the hardware links between the modules and to expose a
+clean, logical and usable interface, the driver registers the following V4L2
+sub-devices:
+
+- 1 `c3-mipi-csi2` sub-device - the MIPI CSI-2 receiver
+- 1 `c3-mipi-adapter` sub-device - the MIPI adapter
+- 1 `c3-isp-core` sub-device - the ISP core
+- 3 `c3-isp-resizer` sub-devices - the ISP resizers
+
+The `c3-isp-core` sub-device is linked to 2 video device nodes for statistics
+capture and parameters programming:
+
+- the `c3-isp-stats` capture video device node for statistics capture
+- the `c3-isp-params` output video device for parameters programming
+
+Each `c3-isp-resizer` sub-device is linked to a capture video device node where
+frames are captured from:
+
+- `c3-isp-resizer0` is linked to the `c3-isp-cap0` capture video device
+- `c3-isp-resizer1` is linked to the `c3-isp-cap1` capture video device
+- `c3-isp-resizer2` is linked to the `c3-isp-cap2` capture video device
+
+The media controller pipeline graph is as follows (with connected a
+IMX290 camera sensor):
+
+.. _isp_topology_graph:
+
+.. kernel-figure:: c3-isp.dot
+    :alt:   c3-isp.dot
+    :align: center
+
+    Media pipeline topology
+
+Implementation
+==============
+
+Runtime configuration of the ISP hardware is performed on the `c3-isp-params`
+video device node using the :ref:`V4L2_META_FMT_C3ISP_PARAMS
+<v4l2-meta-fmt-c3isp-params>` as data format. The buffer structure is defined by
+:c:type:`c3_isp_params_cfg`.
+
+Statistics are captured from the `c3-isp-stats` video device node using the
+:ref:`V4L2_META_FMT_C3ISP_STATS <v4l2-meta-fmt-c3isp-stats>` data format.
+
+The final picture size and format is configured using the V4L2 video
+capture interface on the `c3-isp-cap[0, 2]` video device nodes.
+
+The Amlogic C3 ISP is supported by `libcamera <https://libcamera.org>`_ with a
+dedicated pipeline handler and algorithms that perform run-time image correction
+and enhancement.
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/media/mgb4.rst linux-libre-6.16-gnu/Documentation/admin-guide/media/mgb4.rst
index f69d331e3cb1..5ac69b833a7a 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/media/mgb4.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/media/mgb4.rst
@@ -1,8 +1,17 @@
 .. SPDX-License-Identifier: GPL-2.0
 
+.. include:: <isonum.txt>
+
 The mgb4 driver
 ===============
 
+Copyright |copy| 2023 - 2025 Digiteq Automotive
+    author: Martin Tůma <martin.tuma@digiteqautomotive.com>
+
+This is a v4l2 device driver for the Digiteq Automotive FrameGrabber 4, a PCIe
+card capable of capturing and generating FPD-Link III and GMSL2/3 video streams
+as used in the automotive industry.
+
 sysfs interface
 ---------------
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/media/pci-cardlist.rst linux-libre-6.16-gnu/Documentation/admin-guide/media/pci-cardlist.rst
index 7d8e3c8987db..239879634ea5 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/media/pci-cardlist.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/media/pci-cardlist.rst
@@ -86,7 +86,6 @@ saa7134           Philips SAA7134
 saa7164           NXP SAA7164
 smipcie           SMI PCIe DVBSky cards
 solo6x10          Bluecherry / Softlogic 6x10 capture cards (MPEG-4/H.264)
-sta2x11_vip       STA2X11 VIP Video For Linux
 tw5864            Techwell TW5864 video/audio grabber and encoder
 tw686x            Intersil/Techwell TW686x
 tw68              Techwell tw68x Video For Linux
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/media/v4l-drivers.rst linux-libre-6.16-gnu/Documentation/admin-guide/media/v4l-drivers.rst
index e8761561b2fe..3bac5165b134 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/media/v4l-drivers.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/media/v4l-drivers.rst
@@ -10,6 +10,7 @@ Video4Linux (V4L) driver-specific documentation
 	:maxdepth: 2
 
 	bttv
+	c3-isp
 	cafe_ccic
 	cx88
 	fimc
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/damon/index.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/damon/index.rst
index 33d37bb2fb4e..bc7e976120e0 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/mm/damon/index.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/damon/index.rst
@@ -1,12 +1,11 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-==========================
-DAMON: Data Access MONitor
-==========================
+================================================================
+DAMON: Data Access MONitoring and Access-aware System Operations
+================================================================
 
-:doc:`DAMON </mm/damon/index>` allows light-weight data access monitoring.
-Using DAMON, users can analyze the memory access patterns of their systems and
-optimize those.
+:doc:`DAMON </mm/damon/index>` is a Linux kernel subsystem for efficient data
+access monitoring and access-aware system operations.
 
 .. toctree::
    :maxdepth: 2
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/damon/usage.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/damon/usage.rst
index ced2013db3df..d960aba72b82 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/mm/damon/usage.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/damon/usage.rst
@@ -81,7 +81,7 @@ comma (",").
     │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms,effective_bytes
     │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
     │ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals
-    │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value
+    │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value,nid
     │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low
     │ │ │ │ │ │ │ :ref:`{core_,ops_,}filters <sysfs_filters>`/nr_filters
     │ │ │ │ │ │ │ │ 0/type,matching,allow,memcg_path,addr_start,addr_end,target_idx,min,max
@@ -390,11 +390,11 @@ number (``N``) to the file creates the number of child directories named ``0``
 to ``N-1``.  Each directory represents each goal and current achievement.
 Among the multiple feedback, the best one is used.
 
-Each goal directory contains three files, namely ``target_metric``,
-``target_value`` and ``current_value``.  Users can set and get the three
-parameters for the quota auto-tuning goals that specified on the :ref:`design
-doc <damon_design_damos_quotas_auto_tuning>` by writing to and reading from each
-of the files.  Note that users should further write
+Each goal directory contains four files, namely ``target_metric``,
+``target_value``, ``current_value`` and ``nid``.  Users can set and get the
+four parameters for the quota auto-tuning goals that specified on the
+:ref:`design doc <damon_design_damos_quotas_auto_tuning>` by writing to and
+reading from each of the files.  Note that users should further write
 ``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond
 directory <sysfs_kdamond>` to pass the feedback to DAMON.
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/index.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/index.rst
index 8b35795b664b..2d2f6c222308 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/mm/index.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/index.rst
@@ -42,3 +42,4 @@ the Linux memory management.
    transhuge
    userfaultfd
    zswap
+   kho
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/kho.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/kho.rst
new file mode 100644
index 000000000000..6dc18ed4b886
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/kho.rst
@@ -0,0 +1,115 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+====================
+Kexec Handover Usage
+====================
+
+Kexec HandOver (KHO) is a mechanism that allows Linux to preserve memory
+regions, which could contain serialized system states, across kexec.
+
+This document expects that you are familiar with the base KHO
+:ref:`concepts <kho-concepts>`. If you have not read
+them yet, please do so now.
+
+Prerequisites
+=============
+
+KHO is available when the kernel is compiled with ``CONFIG_KEXEC_HANDOVER``
+set to y. Every KHO producer may have its own config option that you
+need to enable if you would like to preserve their respective state across
+kexec.
+
+To use KHO, please boot the kernel with the ``kho=on`` command line
+parameter. You may use ``kho_scratch`` parameter to define size of the
+scratch regions. For example ``kho_scratch=16M,512M,256M`` will reserve a
+16 MiB low memory scratch area, a 512 MiB global scratch region, and 256 MiB
+per NUMA node scratch regions on boot.
+
+Perform a KHO kexec
+===================
+
+First, before you perform a KHO kexec, you need to move the system into
+the :ref:`KHO finalization phase <kho-finalization-phase>` ::
+
+  $ echo 1 > /sys/kernel/debug/kho/out/finalize
+
+After this command, the KHO FDT is available in
+``/sys/kernel/debug/kho/out/fdt``. Other subsystems may also register
+their own preserved sub FDTs under
+``/sys/kernel/debug/kho/out/sub_fdts/``.
+
+Next, load the target payload and kexec into it. It is important that you
+use the ``-s`` parameter to use the in-kernel kexec file loader, as user
+space kexec tooling currently has no support for KHO with the user space
+based file loader ::
+
+  # kexec -l /path/to/bzImage --initrd /path/to/initrd -s
+  # kexec -e
+
+The new kernel will boot up and contain some of the previous kernel's state.
+
+For example, if you used ``reserve_mem`` command line parameter to create
+an early memory reservation, the new kernel will have that memory at the
+same physical address as the old kernel.
+
+Abort a KHO exec
+================
+
+You can move the system out of KHO finalization phase again by calling ::
+
+  $ echo 0 > /sys/kernel/debug/kho/out/active
+
+After this command, the KHO FDT is no longer available in
+``/sys/kernel/debug/kho/out/fdt``.
+
+debugfs Interfaces
+==================
+
+Currently KHO creates the following debugfs interfaces. Notice that these
+interfaces may change in the future. They will be moved to sysfs once KHO is
+stabilized.
+
+``/sys/kernel/debug/kho/out/finalize``
+    Kexec HandOver (KHO) allows Linux to transition the state of
+    compatible drivers into the next kexec'ed kernel. To do so,
+    device drivers will instruct KHO to preserve memory regions,
+    which could contain serialized kernel state.
+    While the state is serialized, they are unable to perform
+    any modifications to state that was serialized, such as
+    handed over memory allocations.
+
+    When this file contains "1", the system is in the transition
+    state. When contains "0", it is not. To switch between the
+    two states, echo the respective number into this file.
+
+``/sys/kernel/debug/kho/out/fdt``
+    When KHO state tree is finalized, the kernel exposes the
+    flattened device tree blob that carries its current KHO
+    state in this file. Kexec user space tooling can use this
+    as input file for the KHO payload image.
+
+``/sys/kernel/debug/kho/out/scratch_len``
+    Lengths of KHO scratch regions, which are physically contiguous
+    memory regions that will always stay available for future kexec
+    allocations. Kexec user space tools can use this file to determine
+    where it should place its payload images.
+
+``/sys/kernel/debug/kho/out/scratch_phys``
+    Physical locations of KHO scratch regions. Kexec user space tools
+    can use this file in conjunction to scratch_phys to determine where
+    it should place its payload images.
+
+``/sys/kernel/debug/kho/out/sub_fdts/``
+    In the KHO finalization phase, KHO producers register their own
+    FDT blob under this directory.
+
+``/sys/kernel/debug/kho/in/fdt``
+    When the kernel was booted with Kexec HandOver (KHO),
+    the state tree that carries metadata about the previous
+    kernel's state is in this file in the format of flattened
+    device tree. This file may disappear when all consumers of
+    it finished to interpret their metadata.
+
+``/sys/kernel/debug/kho/in/sub_fdts/``
+    Similar to ``kho/out/sub_fdts/``, but contains sub FDT blobs
+    of KHO producers passed from the old kernel.
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/multigen_lru.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/multigen_lru.rst
index 33e068830497..9cb54b4ff5d9 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/mm/multigen_lru.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/multigen_lru.rst
@@ -151,8 +151,9 @@ generations less than or equal to ``min_gen_nr``.
 ``min_gen_nr`` should be less than ``max_gen_nr-1``, since
 ``max_gen_nr`` and ``max_gen_nr-1`` are not fully aged (equivalent to
 the active list) and therefore cannot be evicted. ``swappiness``
-overrides the default value in ``/proc/sys/vm/swappiness``.
-``nr_to_reclaim`` limits the number of pages to evict.
+overrides the default value in ``/proc/sys/vm/swappiness`` and the valid
+range is [0-200, max], with max being exclusively used for the reclamation
+of anonymous memory. ``nr_to_reclaim`` limits the number of pages to evict.
 
 A typical use case is that a job scheduler runs this command before it
 tries to land a new job on a server. If it fails to materialize enough
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/mm/pagemap.rst linux-libre-6.16-gnu/Documentation/admin-guide/mm/pagemap.rst
index afce291649dd..e60e9211fd9b 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/mm/pagemap.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/mm/pagemap.rst
@@ -250,6 +250,7 @@ Following flags about pages are currently supported:
 - ``PAGE_IS_PFNZERO`` - Page has zero PFN
 - ``PAGE_IS_HUGE`` - Page is PMD-mapped THP or Hugetlb backed
 - ``PAGE_IS_SOFT_DIRTY`` - Page is soft-dirty
+- ``PAGE_IS_GUARD`` - Page is a part of a guard region
 
 The ``struct pm_scan_arg`` is used as the argument of the IOCTL.
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/namespaces/resource-control.rst linux-libre-6.16-gnu/Documentation/admin-guide/namespaces/resource-control.rst
index 369556e00f0c..553a44803231 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/namespaces/resource-control.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/namespaces/resource-control.rst
@@ -1,17 +1,17 @@
-===========================
-Namespaces research control
-===========================
+====================================
+User namespaces and resource control
+====================================
 
-There are a lot of kinds of objects in the kernel that don't have
-individual limits or that have limits that are ineffective when a set
-of processes is allowed to switch user ids.  With user namespaces
-enabled in a kernel for people who don't trust their users or their
-users programs to play nice this problems becomes more acute.
+The kernel contains many kinds of objects that either don't have
+individual limits or that have limits which are ineffective when
+a set of processes is allowed to switch their UID. On a system
+where the admins don't trust their users or their users' programs,
+user namespaces expose the system to potential misuse of resources.
 
-Therefore it is recommended that memory control groups be enabled in
-kernels that enable user namespaces, and it is further recommended
-that userspace configure memory control groups to limit how much
-memory user's they don't trust to play nice can use.
+In order to mitigate this, we recommend that admins enable memory
+control groups on any system that enables user namespaces.
+Furthermore, we recommend that admins configure the memory control
+groups to limit the maximum memory usable by any untrusted user.
 
 Memory control groups can be configured by installing the libcgroup
 package present on most distros editing /etc/cgrules.conf,
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/pm/cpufreq.rst linux-libre-6.16-gnu/Documentation/admin-guide/pm/cpufreq.rst
index 3950583f2b15..2d74af7f0efe 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/pm/cpufreq.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/pm/cpufreq.rst
@@ -231,7 +231,7 @@ are the following:
 	present).
 
 	The existence of the limit may be a result of some (often unintentional)
-	BIOS settings, restrictions coming from a service processor or another
+	BIOS settings, restrictions coming from a service processor or other
 	BIOS/HW-based mechanisms.
 
 	This does not cover ACPI thermal limitations which can be discovered
@@ -258,8 +258,8 @@ are the following:
         extension on ARM). If one cannot be determined, this attribute should
         not be present.
 
-        Note, that failed attempt to retrieve current frequency for a given
-        CPU(s) will result in an appropriate error, i.e: EAGAIN for CPU that
+        Note that failed attempt to retrieve current frequency for a given
+        CPU(s) will result in an appropriate error, i.e.: EAGAIN for CPU that
         remains idle (raised on ARM).
 
 ``cpuinfo_max_freq``
@@ -499,7 +499,7 @@ This governor exposes the following tunables:
 	represented by it to be 1.5 times as high as the transition latency
 	(the default)::
 
-	# echo `$(($(cat cpuinfo_transition_latency) * 3 / 2)) > ondemand/sampling_rate
+	# echo `$(($(cat cpuinfo_transition_latency) * 3 / 2))` > ondemand/sampling_rate
 
 ``up_threshold``
 	If the estimated CPU load is above this value (in percent), the governor
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_idle.rst linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_idle.rst
index 5940528146eb..ed6f055d4b14 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_idle.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_idle.rst
@@ -38,6 +38,27 @@ instruction at all.
 only way to pass early-configuration-time parameters to it is via the kernel
 command line.
 
+Sysfs Interface
+===============
+
+The ``intel_idle`` driver exposes the following ``sysfs`` attributes in
+``/sys/devices/system/cpu/cpuidle/``:
+
+``intel_c1_demotion``
+	Enable or disable C1 demotion for all CPUs in the system. This file is
+	only exposed on platforms that support the C1 demotion feature and where
+	it was tested. Value 0 means that C1 demotion is disabled, value 1 means
+	that it is enabled. Write 0 or 1 to disable or enable C1 demotion for
+	all CPUs.
+
+	The C1 demotion feature involves the platform firmware demoting deep
+	C-state requests from the OS (e.g., C6 requests) to C1. The idea is that
+	firmware monitors CPU wake-up rate, and if it is higher than a
+	platform-specific threshold, the firmware demotes deep C-state requests
+	to C1. For example, Linux requests C6, but firmware noticed too many
+	wake-ups per second, and it keeps the CPU in C1. When the CPU stays in
+	C1 long enough, the platform promotes it back to C6. This may improve
+	some workloads' performance, but it may also increase power consumption.
 
 .. _intel-idle-enumeration-of-states:
 
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_pstate.rst linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_pstate.rst
index 78fc83ed2a7e..26e702c7016e 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_pstate.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_pstate.rst
@@ -329,6 +329,106 @@ information listed above is the same for all of the processors supporting the
 HWP feature, which is why ``intel_pstate`` works with all of them.]
 
 
+Support for Hybrid Processors
+=============================
+
+Some processors supported by ``intel_pstate`` contain two or more types of CPU
+cores differing by the maximum turbo P-state, performance vs power characteristics,
+cache sizes, and possibly other properties.  They are commonly referred to as
+hybrid processors.  To support them, ``intel_pstate`` requires HWP to be enabled
+and it assumes the HWP performance units to be the same for all CPUs in the
+system, so a given HWP performance level always represents approximately the
+same physical performance regardless of the core (CPU) type.
+
+Hybrid Processors with SMT
+--------------------------
+
+On systems where SMT (Simultaneous Multithreading), also referred to as
+HyperThreading (HT) in the context of Intel processors, is enabled on at least
+one core, ``intel_pstate`` assigns performance-based priorities to CPUs.  Namely,
+the priority of a given CPU reflects its highest HWP performance level which
+causes the CPU scheduler to generally prefer more performant CPUs, so the less
+performant CPUs are used when the other ones are fully loaded.  However, SMT
+siblings (that is, logical CPUs sharing one physical core) are treated in a
+special way such that if one of them is in use, the effective priority of the
+other ones is lowered below the priorities of the CPUs located in the other
+physical cores.
+
+This approach maximizes performance in the majority of cases, but unfortunately
+it also leads to excessive energy usage in some important scenarios, like video
+playback, which is not generally desirable.  While there is no other viable
+choice with SMT enabled because the effective capacity and utilization of SMT
+siblings are hard to determine, hybrid processors without SMT can be handled in
+more energy-efficient ways.
+
+.. _CAS:
+
+Capacity-Aware Scheduling Support
+---------------------------------
+
+The capacity-aware scheduling (CAS) support in the CPU scheduler is enabled by
+``intel_pstate`` by default on hybrid processors without SMT.  CAS generally
+causes the scheduler to put tasks on a CPU so long as there is a sufficient
+amount of spare capacity on it, and if the utilization of a given task is too
+high for it, the task will need to go somewhere else.
+
+Since CAS takes CPU capacities into account, it does not require CPU
+prioritization and it allows tasks to be distributed more symmetrically among
+the more performant and less performant CPUs.  Once placed on a CPU with enough
+capacity to accommodate it, a task may just continue to run there regardless of
+whether or not the other CPUs are fully loaded, so on average CAS reduces the
+utilization of the more performant CPUs which causes the energy usage to be more
+balanced because the more performant CPUs are generally less energy-efficient
+than the less performant ones.
+
+In order to use CAS, the scheduler needs to know the capacity of each CPU in
+the system and it needs to be able to compute scale-invariant utilization of
+CPUs, so ``intel_pstate`` provides it with the requisite information.
+
+First of all, the capacity of each CPU is represented by the ratio of its highest
+HWP performance level, multiplied by 1024, to the highest HWP performance level
+of the most performant CPU in the system, which works because the HWP performance
+units are the same for all CPUs.  Second, the frequency-invariance computations,
+carried out by the scheduler to always express CPU utilization in the same units
+regardless of the frequency it is currently running at, are adjusted to take the
+CPU capacity into account.  All of this happens when ``intel_pstate`` has
+registered itself with the ``CPUFreq`` core and it has figured out that it is
+running on a hybrid processor without SMT.
+
+Energy-Aware Scheduling Support
+-------------------------------
+
+If ``CONFIG_ENERGY_MODEL`` has been set during kernel configuration and
+``intel_pstate`` runs on a hybrid processor without SMT, in addition to enabling
+`CAS <CAS_>`_ it registers an Energy Model for the processor.  This allows the
+Energy-Aware Scheduling (EAS) support to be enabled in the CPU scheduler if
+``schedutil`` is used as the  ``CPUFreq`` governor which requires ``intel_pstate``
+to operate in the `passive mode <Passive Mode_>`_.
+
+The Energy Model registered by ``intel_pstate`` is artificial (that is, it is
+based on abstract cost values and it does not include any real power numbers)
+and it is relatively simple to avoid unnecessary computations in the scheduler.
+There is a performance domain in it for every CPU in the system and the cost
+values for these performance domains have been chosen so that running a task on
+a less performant (small) CPU appears to be always cheaper than running that
+task on a more performant (big) CPU.  However, for two CPUs of the same type,
+the cost difference depends on their current utilization, and the CPU whose
+current utilization is higher generally appears to be a more expensive
+destination for a given task.  This helps to balance the load among CPUs of the
+same type.
+
+Since EAS works on top of CAS, high-utilization tasks are always migrated to
+CPUs with enough capacity to accommodate them, but thanks to EAS, low-utilization
+tasks tend to be placed on the CPUs that look less expensive to the scheduler.
+Effectively, this causes the less performant and less loaded CPUs to be
+preferred as long as they have enough spare capacity to run the given task
+which generally leads to reduced energy usage.
+
+The Energy Model created by ``intel_pstate`` can be inspected by looking at
+the ``energy_model`` directory in ``debugfs`` (typlically mounted on
+``/sys/kernel/debug/``).
+
+
 User Space Interface in ``sysfs``
 =================================
 
@@ -697,8 +797,8 @@ of them have to be prepended with the ``intel_pstate=`` prefix.
 	Limits`_ for details).
 
 ``no_cas``
-	Do not enable capacity-aware scheduling (CAS) which is enabled by
-	default on hybrid systems.
+	Do not enable `capacity-aware scheduling <CAS_>`_ which is enabled by
+	default on hybrid systems without SMT.
 
 Diagnostics and Tuning
 ======================
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
index 5151ec312dc0..d367ba4d744a 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
@@ -91,12 +91,22 @@ Attributes in each directory:
 ``domain_id``
 	This attribute is used to get the power domain id of this instance.
 
+``die_id``
+	This attribute is used to get the Linux die id of this instance.
+	This attribute is only present for domains with core agents and
+	when the CPUID leaf 0x1f presents die ID.
+
 ``fabric_cluster_id``
 	This attribute is used to get the fabric cluster id of this instance.
 
 ``package_id``
 	This attribute is used to get the package id of this instance.
 
+``agent_types``
+	This attribute displays all the hardware agents present within the
+	domain. Each agent has the capability to control one or more hardware
+	subsystems, which include: core, cache, memory, and I/O.
+
 The other attributes are same as presented at package_*_die_* level.
 
 In most of current use cases, the "max_freq_khz" and "min_freq_khz"
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/quickly-build-trimmed-linux.rst linux-libre-6.16-gnu/Documentation/admin-guide/quickly-build-trimmed-linux.rst
index 07cfd8863b46..4a5ffb0996a3 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/quickly-build-trimmed-linux.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/quickly-build-trimmed-linux.rst
@@ -347,7 +347,7 @@ again.
 
    [:ref:`details<uninstall>`]
 
-.. _submit_improvements:
+.. _submit_improvements_qbtl:
 
 Did you run into trouble following any of the above steps that is not cleared up
 by the reference section below? Or do you have ideas how to improve the text?
@@ -1070,7 +1070,7 @@ complicated, and harder to follow.
 
 That being said: this of course is a balancing act. Hence, if you think an
 additional use-case is worth describing, suggest it to the maintainers of this
-document, as :ref:`described above <submit_improvements>`.
+document, as :ref:`described above <submit_improvements_qbtl>`.
 
 
 ..
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/reporting-issues.rst linux-libre-6.16-gnu/Documentation/admin-guide/reporting-issues.rst
index 2fd5a030235a..9a847506f6ec 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/reporting-issues.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/reporting-issues.rst
@@ -41,7 +41,7 @@ If you are facing multiple issues with the Linux kernel at once, report each
 separately. While writing your report, include all information relevant to the
 issue, like the kernel and the distro used. In case of a regression, CC the
 regressions mailing list (regressions@lists.linux.dev) to your report. Also try
-to pin-point the culprit with a bisection; if you succeed, include its
+to pinpoint the culprit with a bisection; if you succeed, include its
 commit-id and CC everyone in the sign-off-by chain.
 
 Once the report is out, answer any questions that come up and help where you
@@ -206,7 +206,7 @@ Reporting issues only occurring in older kernel version lines
 This subsection is for you, if you tried the latest mainline kernel as outlined
 above, but failed to reproduce your issue there; at the same time you want to
 see the issue fixed in a still supported stable or longterm series or vendor
-kernels regularly rebased on those. If that the case, follow these steps:
+kernels regularly rebased on those. If that is the case, follow these steps:
 
  * Prepare yourself for the possibility that going through the next few steps
    might not get the issue solved in older releases: the fix might be too big
@@ -312,7 +312,7 @@ small modifications to a kernel based on a recent Linux version; that for
 example often holds true for the mainline kernels shipped by Debian GNU/Linux
 Sid or Fedora Rawhide. Some developers will also accept reports about issues
 with kernels from distributions shipping the latest stable kernel, as long as
-its only slightly modified; that for example is often the case for Arch Linux,
+it's only slightly modified; that for example is often the case for Arch Linux,
 regular Fedora releases, and openSUSE Tumbleweed. But keep in mind, you better
 want to use a mainline Linux and avoid using a stable kernel for this
 process, as outlined in the section 'Install a fresh kernel for testing' in more
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/sysctl/vm.rst linux-libre-6.16-gnu/Documentation/admin-guide/sysctl/vm.rst
index 8290177b4f75..9bef46151d53 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/sysctl/vm.rst
@@ -75,6 +75,7 @@ Currently, these files are in /proc/sys/vm:
 - unprivileged_userfaultfd
 - user_reserve_kbytes
 - vfs_cache_pressure
+- vfs_cache_pressure_denom
 - watermark_boost_factor
 - watermark_scale_factor
 - zone_reclaim_mode
@@ -131,6 +132,12 @@ to latency spikes in unsuspecting applications. The kernel employs
 various heuristics to avoid wasting CPU cycles if it detects that
 proactive compaction is not being effective.
 
+Setting the value above 80 will, in addition to lowering the acceptable level
+of fragmentation, make the compaction code more sensitive to increases in
+fragmentation, i.e. compaction will trigger more often, but reduce
+fragmentation by a smaller amount.
+This makes the fragmentation level more stable over time.
+
 Be careful when setting it to extreme values like 100, as that may
 cause excessive background compaction activity.
 
@@ -1017,19 +1024,28 @@ vfs_cache_pressure
 This percentage value controls the tendency of the kernel to reclaim
 the memory which is used for caching of directory and inode objects.
 
-At the default value of vfs_cache_pressure=100 the kernel will attempt to
-reclaim dentries and inodes at a "fair" rate with respect to pagecache and
-swapcache reclaim.  Decreasing vfs_cache_pressure causes the kernel to prefer
-to retain dentry and inode caches. When vfs_cache_pressure=0, the kernel will
-never reclaim dentries and inodes due to memory pressure and this can easily
-lead to out-of-memory conditions. Increasing vfs_cache_pressure beyond 100
-causes the kernel to prefer to reclaim dentries and inodes.
+At the default value of vfs_cache_pressure=vfs_cache_pressure_denom the kernel
+will attempt to reclaim dentries and inodes at a "fair" rate with respect to
+pagecache and swapcache reclaim.  Decreasing vfs_cache_pressure causes the
+kernel to prefer to retain dentry and inode caches. When vfs_cache_pressure=0,
+the kernel will never reclaim dentries and inodes due to memory pressure and
+this can easily lead to out-of-memory conditions. Increasing vfs_cache_pressure
+beyond vfs_cache_pressure_denom causes the kernel to prefer to reclaim dentries
+and inodes.
+
+Increasing vfs_cache_pressure significantly beyond vfs_cache_pressure_denom may
+have negative performance impact. Reclaim code needs to take various locks to
+find freeable directory and inode objects. When vfs_cache_pressure equals
+(10 * vfs_cache_pressure_denom), it will look for ten times more freeable
+objects than there are.
 
-Increasing vfs_cache_pressure significantly beyond 100 may have negative
-performance impact. Reclaim code needs to take various locks to find freeable
-directory and inode objects. With vfs_cache_pressure=1000, it will look for
-ten times more freeable objects than there are.
+Note: This setting should always be used together with vfs_cache_pressure_denom.
+
+vfs_cache_pressure_denom
+========================
 
+Defaults to 100 (minimum allowed value). Requires corresponding
+vfs_cache_pressure setting to take effect.
 
 watermark_boost_factor
 ======================
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/thunderbolt.rst linux-libre-6.16-gnu/Documentation/admin-guide/thunderbolt.rst
index d0502691dfa1..240fee618e06 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/thunderbolt.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/thunderbolt.rst
@@ -296,6 +296,39 @@ information is missing.
 To recover from this mode, one needs to flash a valid NVM image to the
 host controller in the same way it is done in the previous chapter.
 
+Tunneling events
+----------------
+The driver sends ``KOBJ_CHANGE`` events to userspace when there is a
+tunneling change in the ``thunderbolt_domain``. The notification carries
+following environment variables::
+
+  TUNNEL_EVENT=<EVENT>
+  TUNNEL_DETAILS=0:12 <-> 1:20 (USB3)
+
+Possible values for ``<EVENT>`` are:
+
+  activated
+    The tunnel was activated (created).
+
+  changed
+    There is a change in this tunnel. For example bandwidth allocation was
+    changed.
+
+  deactivated
+    The tunnel was torn down.
+
+  low bandwidth
+    The tunnel is not getting optimal bandwidth.
+
+  insufficient bandwidth
+    There is not enough bandwidth for the current tunnel requirements.
+
+The ``TUNNEL_DETAILS`` is only provided if the tunnel is known. For
+example, in case of Firmware Connection Manager this is missing or does
+not provide full tunnel information. In case of Software Connection Manager
+this includes full tunnel details. The format currently matches what the
+driver uses when logging. This may change over time.
+
 Networking over Thunderbolt cable
 ---------------------------------
 Thunderbolt technology allows software communication between two hosts
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst linux-libre-6.16-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
index 03c55151346c..d8946b084b1e 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
@@ -267,7 +267,7 @@ culprit might be known already. For further details on what actually qualifies
 as a regression check out Documentation/admin-guide/reporting-regressions.rst.
 
 If you run into any problems while following this guide or have ideas how to
-improve it, :ref:`please let the kernel developers know <submit_improvements>`.
+improve it, :ref:`please let the kernel developers know <submit_improvements_vbbr>`.
 
 .. _introprep_bissbs:
 
@@ -1055,7 +1055,7 @@ follow these instructions.
 
 [:ref:`details <introoptional_bisref>`]
 
-.. _submit_improvements:
+.. _submit_improvements_vbbr:
 
 Conclusion
 ----------
diff --git linux-libre-6.15-gnu/Documentation/admin-guide/xfs.rst linux-libre-6.16-gnu/Documentation/admin-guide/xfs.rst
index 5becb441c3cb..a18328a5fb93 100644
--- linux-libre-6.15-gnu/Documentation/admin-guide/xfs.rst
+++ linux-libre-6.16-gnu/Documentation/admin-guide/xfs.rst
@@ -151,6 +151,17 @@ When mounting an XFS filesystem, the following options are accepted.
 	optional, and the log section can be separate from the data
 	section or contained within it.
 
+  max_atomic_write=value
+	Set the maximum size of an atomic write.  The size may be
+	specified in bytes, in kilobytes with a "k" suffix, in megabytes
+	with a "m" suffix, or in gigabytes with a "g" suffix.  The size
+	cannot be larger than the maximum write size, larger than the
+	size of any allocation group, or larger than the size of a
+	remapping operation that the log can complete atomically.
+
+	The default value is to set the maximum I/O completion size
+	to allow each CPU to handle one at a time.
+
   max_open_zones=value
 	Specify the max number of zones to keep open for writing on a
 	zoned rt device. Many open zones aids file data separation
diff --git linux-libre-6.15-gnu/Documentation/arch/arm64/booting.rst linux-libre-6.16-gnu/Documentation/arch/arm64/booting.rst
index dee7b6de864f..ee9b790c0d72 100644
--- linux-libre-6.15-gnu/Documentation/arch/arm64/booting.rst
+++ linux-libre-6.16-gnu/Documentation/arch/arm64/booting.rst
@@ -234,7 +234,7 @@ Before jumping into the kernel, the following conditions must be met:
 
   - If the kernel is entered at EL1:
 
-      - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
+      - ICC_SRE_EL2.Enable (bit 3) must be initialised to 0b1
       - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
 
   - The DT or ACPI tables must describe a GICv3 interrupt controller.
diff --git linux-libre-6.15-gnu/Documentation/arch/arm64/cpu-feature-registers.rst linux-libre-6.16-gnu/Documentation/arch/arm64/cpu-feature-registers.rst
index 253e9743de2f..add66afc7b03 100644
--- linux-libre-6.15-gnu/Documentation/arch/arm64/cpu-feature-registers.rst
+++ linux-libre-6.16-gnu/Documentation/arch/arm64/cpu-feature-registers.rst
@@ -72,14 +72,15 @@ there are some issues with their usage.
     process could be migrated to another CPU by the time it uses the
     register value, unless the CPU affinity is set. Hence, there is no
     guarantee that the value reflects the processor that it is
-    currently executing on. The REVIDR is not exposed due to this
-    constraint, as REVIDR makes sense only in conjunction with the
-    MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs
-    at::
+    currently executing on. REVIDR and AIDR are not exposed due to this
+    constraint, as these registers only make sense in conjunction with
+    the MIDR. Alternately, MIDR_EL1, REVIDR_EL1, and AIDR_EL1 are exposed
+    via sysfs at::
 
 	/sys/devices/system/cpu/cpu$ID/regs/identification/
-	                                              \- midr
-	                                              \- revidr
+	                                              \- midr_el1
+	                                              \- revidr_el1
+	                                              \- aidr_el1
 
 3. Implementation
 --------------------
diff --git linux-libre-6.15-gnu/Documentation/arch/arm64/silicon-errata.rst linux-libre-6.16-gnu/Documentation/arch/arm64/silicon-errata.rst
index f968c13b46a7..b18ef4064bc0 100644
--- linux-libre-6.15-gnu/Documentation/arch/arm64/silicon-errata.rst
+++ linux-libre-6.16-gnu/Documentation/arch/arm64/silicon-errata.rst
@@ -57,6 +57,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Ampere         | AmpereOne AC04  | AC04_CPU_10     | AMPERE_ERRATUM_AC03_CPU_38  |
 +----------------+-----------------+-----------------+-----------------------------+
+| Ampere         | AmpereOne AC04  | AC04_CPU_23     | AMPERE_ERRATUM_AC04_CPU_23  |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-6.15-gnu/Documentation/arch/arm64/sme.rst linux-libre-6.16-gnu/Documentation/arch/arm64/sme.rst
index b2fa01f85cb5..4cb38330e704 100644
--- linux-libre-6.15-gnu/Documentation/arch/arm64/sme.rst
+++ linux-libre-6.16-gnu/Documentation/arch/arm64/sme.rst
@@ -69,8 +69,8 @@ model features for SME is included in Appendix A.
   vectors from 0 to VL/8-1 stored in the same endianness invariant format as is
   used for SVE vectors.
 
-* On thread creation TPIDR2_EL0 is preserved unless CLONE_SETTLS is specified,
-  in which case it is set to 0.
+* On thread creation PSTATE.ZA and TPIDR2_EL0 are preserved unless CLONE_VM
+  is specified, in which case PSTATE.ZA is set to 0 and TPIDR2_EL0 is set to 0.
 
 2.  Vector lengths
 ------------------
@@ -115,7 +115,7 @@ be zeroed.
 5.  Signal handling
 -------------------
 
-* Signal handlers are invoked with streaming mode and ZA disabled.
+* Signal handlers are invoked with PSTATE.SM=0, PSTATE.ZA=0, and TPIDR2_EL0=0.
 
 * A new signal frame record TPIDR2_MAGIC is added formatted as a struct
   tpidr2_context to allow access to TPIDR2_EL0 from signal handlers.
@@ -241,7 +241,7 @@ prctl(PR_SME_SET_VL, unsigned long arg)
       length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag,
       does not constitute a change to the vector length for this purpose.
 
-    * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.
+    * Changing the vector length causes PSTATE.ZA to be cleared.
       Calling PR_SME_SET_VL with vl equal to the thread's current vector
       length, or calling PR_SME_SET_VL with the PR_SME_SET_VL_ONEXEC flag,
       does not constitute a change to the vector length for this purpose.
diff --git linux-libre-6.15-gnu/Documentation/arch/openrisc/openrisc_port.rst linux-libre-6.16-gnu/Documentation/arch/openrisc/openrisc_port.rst
index a8f307a3b499..60b0a9e51d70 100644
--- linux-libre-6.15-gnu/Documentation/arch/openrisc/openrisc_port.rst
+++ linux-libre-6.16-gnu/Documentation/arch/openrisc/openrisc_port.rst
@@ -40,6 +40,12 @@ Build the Linux kernel as usual::
 	make ARCH=openrisc CROSS_COMPILE="or1k-linux-" defconfig
 	make ARCH=openrisc CROSS_COMPILE="or1k-linux-"
 
+If you want to embed initramfs in the kernel, also pass ``CONFIG_INITRAMFS_SOURCE``. For example::
+
+	make ARCH=openrisc CROSS_COMPILE="or1k-linux-" CONFIG_INITRAMFS_SOURCE="path/to/rootfs path/to/devnodes"
+
+For more information on this, please check Documentation/filesystems/ramfs-rootfs-initramfs.rst.
+
 3) Running on FPGA (optional)
 
 The OpenRISC community typically uses FuseSoC to manage building and programming
diff --git linux-libre-6.15-gnu/Documentation/arch/powerpc/htm.rst linux-libre-6.16-gnu/Documentation/arch/powerpc/htm.rst
new file mode 100644
index 000000000000..fcb4eb6306b1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/arch/powerpc/htm.rst
@@ -0,0 +1,104 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _htm:
+
+===================================
+HTM (Hardware Trace Macro)
+===================================
+
+Athira Rajeev, 2 Mar 2025
+
+.. contents::
+    :depth: 3
+
+
+Basic overview
+==============
+
+H_HTM is used as an interface for executing Hardware Trace Macro (HTM)
+functions, including setup, configuration, control and dumping of the HTM data.
+For using HTM, it is required to setup HTM buffers and HTM operations can
+be controlled using the H_HTM hcall. The hcall can be invoked for any core/chip
+of the system from within a partition itself. To use this feature, a debugfs
+folder called "htmdump" is present under /sys/kernel/debug/powerpc.
+
+
+HTM debugfs example usage
+=========================
+
+.. code-block:: sh
+
+  #  ls /sys/kernel/debug/powerpc/htmdump/
+  coreindexonchip  htmcaps  htmconfigure  htmflags  htminfo  htmsetup
+  htmstart  htmstatus  htmtype  nodalchipindex  nodeindex  trace
+
+Details on each file:
+
+* nodeindex, nodalchipindex, coreindexonchip specifies which partition to configure the HTM for.
+* htmtype: specifies the type of HTM. Supported target is hardwareTarget.
+* trace: is to read the HTM data.
+* htmconfigure: Configure/Deconfigure the HTM. Writing 1 to the file will configure the trace, writing 0 to the file will do deconfigure.
+* htmstart: start/Stop the HTM. Writing 1 to the file will start the tracing, writing 0 to the file will stop the tracing.
+* htmstatus: get the status of HTM. This is needed to understand the HTM state after each operation.
+* htmsetup: set the HTM buffer size. Size of HTM buffer is in power of 2
+* htminfo: provides the system processor configuration details. This is needed to understand the appropriate values for nodeindex, nodalchipindex, coreindexonchip.
+* htmcaps : provides the HTM capabilities like minimum/maximum buffer size, what kind of tracing the HTM supports etc.
+* htmflags : allows to pass flags to hcall. Currently supports controlling the wrapping of HTM buffer.
+
+To see the system processor configuration details:
+
+.. code-block:: sh
+
+  # cat /sys/kernel/debug/powerpc/htmdump/htminfo > htminfo_file
+
+The result can be interpreted using hexdump.
+
+To collect HTM traces for a partition represented by nodeindex as
+zero, nodalchipindex as 1 and coreindexonchip as 12
+
+.. code-block:: sh
+
+  # cd /sys/kernel/debug/powerpc/htmdump/
+  # echo 2 > htmtype
+  # echo 33 > htmsetup ( sets 8GB memory for HTM buffer, number is size in power of 2 )
+
+This requires a CEC reboot to get the HTM buffers allocated.
+
+.. code-block:: sh
+
+  # cd /sys/kernel/debug/powerpc/htmdump/
+  # echo 2 > htmtype
+  # echo 0 > nodeindex
+  # echo 1 > nodalchipindex
+  # echo 12 > coreindexonchip
+  # echo 1 > htmflags     # to set noWrap for HTM buffers
+  # echo 1 > htmconfigure # Configure the HTM
+  # echo 1 > htmstart     # Start the HTM
+  # echo 0 > htmstart     # Stop the HTM
+  # echo 0 > htmconfigure # Deconfigure the HTM
+  # cat htmstatus         # Dump the status of HTM entries as data
+
+Above will set the htmtype and core details, followed by executing respective HTM operation.
+
+Read the HTM trace data
+========================
+
+After starting the trace collection, run the workload
+of interest. Stop the trace collection after required period
+of time, and read the trace file.
+
+.. code-block:: sh
+
+  # cat /sys/kernel/debug/powerpc/htmdump/trace > trace_file
+
+This trace file will contain the relevant instruction traces
+collected during the workload execution. And can be used as
+input file for trace decoders to understand data.
+
+Benefits of using HTM debugfs interface
+=======================================
+
+It is now possible to collect traces for a particular core/chip
+from within any partition of the system and decode it. Through
+this enablement, a small partition can be dedicated to collect the
+trace data and analyze to provide important information for Performance
+analysis, Software tuning, or Hardware debug.
diff --git linux-libre-6.15-gnu/Documentation/arch/powerpc/kvm-nested.rst linux-libre-6.16-gnu/Documentation/arch/powerpc/kvm-nested.rst
index 5defd13cc6c1..574592505604 100644
--- linux-libre-6.15-gnu/Documentation/arch/powerpc/kvm-nested.rst
+++ linux-libre-6.16-gnu/Documentation/arch/powerpc/kvm-nested.rst
@@ -208,13 +208,9 @@ associated values for each ID in the GSB::
       flags:
          Bit 0: getGuestWideState: Request state of the Guest instead
            of an individual VCPU.
-         Bit 1: takeOwnershipOfVcpuState Indicate the L1 is taking
-           over ownership of the VCPU state and that the L0 can free
-           the storage holding the state. The VCPU state will need to
-           be returned to the Hypervisor via H_GUEST_SET_STATE prior
-           to H_GUEST_RUN_VCPU being called for this VCPU. The data
-           returned in the dataBuffer is in a Hypervisor internal
-           format.
+         Bit 1: getHostWideState: Request stats of the Host. This causes
+           the guestId and vcpuId parameters to be ignored and attempting
+           to get the VCPU/Guest state will cause an error.
          Bits 2-63: Reserved
       guestId: ID obtained from H_GUEST_CREATE
       vcpuId: ID of the vCPU pass to H_GUEST_CREATE_VCPU
@@ -406,9 +402,10 @@ the partition like the timebase offset and partition scoped page
 table information.
 
 +--------+-------+----+--------+----------------------------------+
-|   ID   | Size  | RW | Thread | Details                          |
-|        | Bytes |    | Guest  |                                  |
-|        |       |    | Scope  |                                  |
+|   ID   | Size  | RW |(H)ost  | Details                          |
+|        | Bytes |    |(G)uest |                                  |
+|        |       |    |(T)hread|                                  |
+|        |       |    |Scope   |                                  |
 +========+=======+====+========+==================================+
 | 0x0000 |       | RW |   TG   | NOP element                      |
 +--------+-------+----+--------+----------------------------------+
@@ -434,6 +431,29 @@ table information.
 |        |       |    |        |- 0x8 Table size.                 |
 +--------+-------+----+--------+----------------------------------+
 | 0x0007-|       |    |        | Reserved                         |
+| 0x07FF |       |    |        |                                  |
++--------+-------+----+--------+----------------------------------+
+| 0x0800 | 0x08  | R  |   H    | Current usage in bytes of the    |
+|        |       |    |        | L0's Guest Management Space      |
+|        |       |    |        | for an L1-Lpar.                  |
++--------+-------+----+--------+----------------------------------+
+| 0x0801 | 0x08  | R  |   H    | Max bytes available in the       |
+|        |       |    |        | L0's Guest Management Space for  |
+|        |       |    |        | an L1-Lpar                       |
++--------+-------+----+--------+----------------------------------+
+| 0x0802 | 0x08  | R  |   H    | Current usage in bytes of the    |
+|        |       |    |        | L0's Guest Page Table Management |
+|        |       |    |        | Space for an L1-Lpar             |
++--------+-------+----+--------+----------------------------------+
+| 0x0803 | 0x08  | R  |   H    | Max bytes available in the L0's  |
+|        |       |    |        | Guest Page Table Management      |
+|        |       |    |        | Space for an L1-Lpar             |
++--------+-------+----+--------+----------------------------------+
+| 0x0804 | 0x08  | R  |   H    | Cumulative Reclaimed bytes from  |
+|        |       |    |        | L0 Guest's Page Table Management |
+|        |       |    |        | Space due to overcommit          |
++--------+-------+----+--------+----------------------------------+
+| 0x0805-|       |    |        | Reserved                         |
 | 0x0BFF |       |    |        |                                  |
 +--------+-------+----+--------+----------------------------------+
 | 0x0C00 | 0x10  | RW |   T    |Run vCPU Input Buffer:            |
diff --git linux-libre-6.15-gnu/Documentation/arch/riscv/cmodx.rst linux-libre-6.16-gnu/Documentation/arch/riscv/cmodx.rst
index 8c48bcff3df9..40ba53bed5df 100644
--- linux-libre-6.15-gnu/Documentation/arch/riscv/cmodx.rst
+++ linux-libre-6.16-gnu/Documentation/arch/riscv/cmodx.rst
@@ -10,13 +10,45 @@ modified by the program itself. Instruction storage and the instruction cache
 program must enforce its own synchronization with the unprivileged fence.i
 instruction.
 
-However, the default Linux ABI prohibits the use of fence.i in userspace
-applications. At any point the scheduler may migrate a task onto a new hart. If
-migration occurs after the userspace synchronized the icache and instruction
-storage with fence.i, the icache on the new hart will no longer be clean. This
-is due to the behavior of fence.i only affecting the hart that it is called on.
-Thus, the hart that the task has been migrated to may not have synchronized
-instruction storage and icache.
+CMODX in the Kernel Space
+-------------------------
+
+Dynamic ftrace
+---------------------
+
+Essentially, dynamic ftrace directs the control flow by inserting a function
+call at each patchable function entry, and patches it dynamically at runtime to
+enable or disable the redirection. In the case of RISC-V, 2 instructions,
+AUIPC + JALR, are required to compose a function call. However, it is impossible
+to patch 2 instructions and expect that a concurrent read-side executes them
+without a race condition. This series makes atmoic code patching possible in
+RISC-V ftrace. Kernel preemption makes things even worse as it allows the old
+state to persist across the patching process with stop_machine().
+
+In order to get rid of stop_machine() and run dynamic ftrace with full kernel
+preemption, we partially initialize each patchable function entry at boot-time,
+setting the first instruction to AUIPC, and the second to NOP. Now, atmoic
+patching is possible because the kernel only has to update one instruction.
+According to Ziccif, as long as an instruction is naturally aligned, the ISA
+guarantee an  atomic update.
+
+By fixing down the first instruction, AUIPC, the range of the ftrace trampoline
+is limited to +-2K from the predetermined target, ftrace_caller, due to the lack
+of immediate encoding space in RISC-V. To address the issue, we introduce
+CALL_OPS, where an 8B naturally align metadata is added in front of each
+pacthable function. The metadata is resolved at the first trampoline, then the
+execution can be derect to another custom trampoline.
+
+CMODX in the User Space
+-----------------------
+
+Though fence.i is an unprivileged instruction, the default Linux ABI prohibits
+the use of fence.i in userspace applications. At any point the scheduler may
+migrate a task onto a new hart. If migration occurs after the userspace
+synchronized the icache and instruction storage with fence.i, the icache on the
+new hart will no longer be clean. This is due to the behavior of fence.i only
+affecting the hart that it is called on. Thus, the hart that the task has been
+migrated to may not have synchronized instruction storage and icache.
 
 There are two ways to solve this problem: use the riscv_flush_icache() syscall,
 or use the ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` prctl() and emit fence.i in
diff --git linux-libre-6.15-gnu/Documentation/arch/riscv/hwprobe.rst linux-libre-6.16-gnu/Documentation/arch/riscv/hwprobe.rst
index f60bf5991755..2aa9be272d5d 100644
--- linux-libre-6.15-gnu/Documentation/arch/riscv/hwprobe.rst
+++ linux-libre-6.16-gnu/Documentation/arch/riscv/hwprobe.rst
@@ -271,6 +271,10 @@ The following keys are defined:
   * :c:macro:`RISCV_HWPROBE_EXT_ZICBOM`: The Zicbom extension is supported, as
        ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
 
+  * :c:macro:`RISCV_HWPROBE_EXT_ZABHA`: The Zabha extension is supported as
+       ratified in commit 49f49c842ff9 ("Update to Rafified state") of
+       riscv-zabha.
+
 * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: Deprecated.  Returns similar values to
      :c:macro:`RISCV_HWPROBE_KEY_MISALIGNED_SCALAR_PERF`, but the key was
      mistakenly classified as a bitmask rather than a value.
@@ -335,3 +339,25 @@ The following keys are defined:
 
 * :c:macro:`RISCV_HWPROBE_KEY_ZICBOM_BLOCK_SIZE`: An unsigned int which
   represents the size of the Zicbom block in bytes.
+
+* :c:macro:`RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0`: A bitmask containing the
+  sifive vendor extensions that are compatible with the
+  :c:macro:`RISCV_HWPROBE_BASE_BEHAVIOR_IMA`: base system behavior.
+
+  * SIFIVE
+
+    * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCDOD`: The Xsfqmaccdod vendor
+        extension is supported in version 1.1 of SiFive Int8 Matrix Multiplication
+	Extensions Specification.
+
+    * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCQOQ`: The Xsfqmaccqoq vendor
+        extension is supported in version 1.1 of SiFive Int8 Matrix Multiplication
+	Instruction Extensions Specification.
+
+    * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XSFVFNRCLIPXFQF`: The Xsfvfnrclipxfqf
+        vendor extension is supported in version 1.0 of SiFive FP32-to-int8 Ranged
+	Clip Instructions Extensions Specification.
+
+    * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XSFVFWMACCQQQ`: The Xsfvfwmaccqqq
+        vendor extension is supported in version 1.0 of Matrix Multiply Accumulate
+	Instruction Extensions Specification.
\ No newline at end of file
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/amd-debugging.rst linux-libre-6.16-gnu/Documentation/arch/x86/amd-debugging.rst
new file mode 100644
index 000000000000..d92bf59d62c7
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/arch/x86/amd-debugging.rst
@@ -0,0 +1,368 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Debugging AMD Zen systems
++++++++++++++++++++++++++
+
+Introduction
+============
+
+This document describes techniques that are useful for debugging issues with
+AMD Zen systems.  It is intended for use by developers and technical users
+to help identify and resolve issues.
+
+S3 vs s2idle
+============
+
+On AMD systems, it's not possible to simultaneously support suspend-to-RAM (S3)
+and suspend-to-idle (s2idle).  To confirm which mode your system supports you
+can look at ``cat /sys/power/mem_sleep``.  If it shows ``s2idle [deep]`` then
+*S3* is supported.  If it shows ``[s2idle]`` then *s2idle* is
+supported.
+
+On systems that support *S3*, the firmware will be utilized to put all hardware into
+the appropriate low power state.
+
+On systems that support *s2idle*, the kernel will be responsible for transitioning devices
+into the appropriate low power state. When all devices are in the appropriate low
+power state, the hardware will transition into a hardware sleep state.
+
+After a suspend cycle you can tell how much time was spent in a hardware sleep
+state by looking at ``cat /sys/power/suspend_stats/last_hw_sleep``.
+
+This flowchart explains how the AMD s2idle suspend flow works.
+
+.. kernel-figure:: suspend.svg
+
+This flowchart explains how the amd s2idle resume flow works.
+
+.. kernel-figure:: resume.svg
+
+s2idle debugging tool
+=====================
+
+As there are a lot of places that problems can occur, a debugging tool has been
+created at
+`amd-debug-tools <https://git.kernel.org/pub/scm/linux/kernel/git/superm1/amd-debug-tools.git/about/>`_
+that can help test for common problems and offer suggestions.
+
+If you have an s2idle issue, it's best to start with this and follow instructions
+from its findings.  If you continue to have an issue, raise a bug with the
+report generated from this script to
+`drm/amd gitlab <https://gitlab.freedesktop.org/drm/amd/-/issues/new?issuable_template=s2idle_BUG_TEMPLATE>`_.
+
+Spurious s2idle wakeups from an IRQ
+===================================
+
+Spurious wakeups will generally have an IRQ set to ``/sys/power/pm_wakeup_irq``.
+This can be matched to ``/proc/interrupts`` to determine what device woke the system.
+
+If this isn't enough to debug the problem, then the following sysfs files
+can be set to add more verbosity to the wakeup process: ::
+
+  # echo 1 | sudo tee /sys/power/pm_debug_messages
+  # echo 1 | sudo tee /sys/power/pm_print_times
+
+After making those changes, the kernel will display messages that can
+be traced back to kernel s2idle loop code as well as display any active
+GPIO sources while waking up.
+
+If the wakeup is caused by the ACPI SCI, additional ACPI debugging may be
+needed.  These commands can enable additional trace data: ::
+
+  # echo enable | sudo tee /sys/module/acpi/parameters/trace_state
+  # echo 1 | sudo tee /sys/module/acpi/parameters/aml_debug_output
+  # echo 0x0800000f | sudo tee /sys/module/acpi/parameters/debug_level
+  # echo 0xffff0000 | sudo tee /sys/module/acpi/parameters/debug_layer
+
+Spurious s2idle wakeups from a GPIO
+===================================
+
+If a GPIO is active when waking up the system ideally you would look at the
+schematic to determine what device it is associated with. If the schematic
+is not available, another tactic is to look at the ACPI _EVT() entry
+to determine what device is notified when that GPIO is active.
+
+For a hypothetical example, say that GPIO 59 woke up the system.  You can
+look at the SSDT to determine what device is notified when GPIO 59 is active.
+
+First convert the GPIO number into hex. ::
+
+  $ python3 -c "print(hex(59))"
+  0x3b
+
+Next determine which ACPI table has the ``_EVT`` entry. For example: ::
+
+  $ sudo grep EVT /sys/firmware/acpi/tables/SSDT*
+  grep: /sys/firmware/acpi/tables/SSDT27: binary file matches
+
+Decode this table::
+
+  $ sudo cp /sys/firmware/acpi/tables/SSDT27 .
+  $ sudo iasl -d SSDT27
+
+Then look at the table and find the matching entry for GPIO 0x3b. ::
+
+  Case (0x3B)
+  {
+      M000 (0x393B)
+      M460 ("    Notify (\\_SB.PCI0.GP17.XHC1, 0x02)\n", Zero, Zero, Zero, Zero, Zero, Zero)
+      Notify (\_SB.PCI0.GP17.XHC1, 0x02) // Device Wake
+  }
+
+You can see in this case that the device ``\_SB.PCI0.GP17.XHC1`` is notified
+when GPIO 59 is active. It's obvious this is an XHCI controller, but to go a
+step further you can figure out which XHCI controller it is by matching it to
+ACPI.::
+
+  $ grep "PCI0.GP17.XHC1" /sys/bus/acpi/devices/*/path
+  /sys/bus/acpi/devices/device:2d/path:\_SB_.PCI0.GP17.XHC1
+  /sys/bus/acpi/devices/device:2e/path:\_SB_.PCI0.GP17.XHC1.RHUB
+  /sys/bus/acpi/devices/device:2f/path:\_SB_.PCI0.GP17.XHC1.RHUB.PRT1
+  /sys/bus/acpi/devices/device:30/path:\_SB_.PCI0.GP17.XHC1.RHUB.PRT1.CAM0
+  /sys/bus/acpi/devices/device:31/path:\_SB_.PCI0.GP17.XHC1.RHUB.PRT1.CAM1
+  /sys/bus/acpi/devices/device:32/path:\_SB_.PCI0.GP17.XHC1.RHUB.PRT2
+  /sys/bus/acpi/devices/LNXPOWER:0d/path:\_SB_.PCI0.GP17.XHC1.PWRS
+
+Here you can see it matches to ``device:2d``. Look at the ``physical_node``
+to determine what PCI device that actually is. ::
+
+  $ ls -l /sys/bus/acpi/devices/device:2d/physical_node
+  lrwxrwxrwx 1 root root 0 Feb 12 13:22 /sys/bus/acpi/devices/device:2d/physical_node -> ../../../../../pci0000:00/0000:00:08.1/0000:c2:00.4
+
+So there you have it: the PCI device associated with this GPIO wakeup was ``0000:c2:00.4``.
+
+The ``amd_s2idle.py`` script will capture most of these artifacts for you.
+
+s2idle PM debug messages
+========================
+
+During the s2idle flow on AMD systems, the ACPI LPS0 driver is responsible
+to check all uPEP constraints.  Failing uPEP constraints does not prevent
+s0i3 entry.  This means that if some constraints are not met, it is possible
+the kernel may attempt to enter s2idle even if there are some known issues.
+
+To activate PM debugging, either specify ``pm_debug_messagess`` kernel
+command-line option at boot or write to ``/sys/power/pm_debug_messages``.
+Unmet constraints will be displayed in the kernel log and can be
+viewed by logging tools that process kernel ring buffer like ``dmesg`` or
+``journalctl``."
+
+If the system freezes on entry/exit before these messages are flushed, a
+useful debugging tactic is to unbind the ``amd_pmc`` driver to prevent
+notification to the platform to start s0i3 entry.  This will stop the
+system from freezing on entry or exit and let you view all the failed
+constraints. ::
+
+  cd /sys/bus/platform/drivers/amd_pmc
+  ls | grep AMD | sudo tee unbind
+
+After doing this, run the suspend cycle and look specifically for errors around: ::
+
+  ACPI: LPI: Constraint not met; min power state:%s current power state:%s
+
+Historical examples of s2idle issues
+====================================
+
+To help understand the types of issues that can occur and how to debug them,
+here are some historical examples of s2idle issues that have been resolved.
+
+Core offlining
+--------------
+An end user had reported that taking a core offline would prevent the system
+from properly entering s0i3.  This was debugged using internal AMD tools
+to capture and display a stream of metrics from the hardware showing what changed
+when a core was offlined.  It was determined that the hardware didn't get
+notification the offline cores were in the deepest state, and so it prevented
+CPU from going into the deepest state. The issue was debugged to a missing
+command to put cores into C3 upon offline.
+
+`commit d6b88ce2eb9d2 ("ACPI: processor idle: Allow playing dead in C3 state") <https://git.kernel.org/torvalds/c/d6b88ce2eb9d2>`_
+
+Corruption after resume
+-----------------------
+A big problem that occurred with Rembrandt was that there was graphical
+corruption after resume.  This happened because of a misalignment of PSP
+and driver responsibility.  The PSP will save and restore DMCUB, but the
+driver assumed it needed to reset DMCUB on resume.
+This actually was a misalignment for earlier silicon as well, but was not
+observed.
+
+`commit 79d6b9351f086 ("drm/amd/display: Don't reinitialize DMCUB on s0ix resume") <https://git.kernel.org/torvalds/c/79d6b9351f086>`_
+
+Back to Back suspends fail
+--------------------------
+When using a wakeup source that triggers the IRQ to wakeup, a bug in the
+pinctrl-amd driver may capture the wrong state of the IRQ and prevent the
+system going back to sleep properly.
+
+`commit b8c824a869f22 ("pinctrl: amd: Don't save/restore interrupt status and wake status bits") <https://git.kernel.org/torvalds/c/b8c824a869f22>`_
+
+Spurious timer based wakeup after 5 minutes
+-------------------------------------------
+The HPET was being used to program the wakeup source for the system, however
+this was causing a spurious wakeup after 5 minutes.  The correct alarm to use
+was the ACPI alarm.
+
+`commit 3d762e21d5637 ("rtc: cmos: Use ACPI alarm for non-Intel x86 systems too") <https://git.kernel.org/torvalds/c/3d762e21d5637>`_
+
+Disk disappears after resume
+----------------------------
+After resuming from s2idle, the NVME disk would disappear.  This was due to the
+BIOS not specifying the _DSD StorageD3Enable property.  This caused the NVME
+driver not to put the disk into the expected state at suspend and to fail
+on resume.
+
+`commit e79a10652bbd3 ("ACPI: x86: Force StorageD3Enable on more products") <https://git.kernel.org/torvalds/c/e79a10652bbd3>`_
+
+Spurious IRQ1
+-------------
+A number of Renoir, Lucienne, Cezanne, & Barcelo platforms have a
+platform firmware bug where IRQ1 is triggered during s0i3 resume.
+
+This was fixed in the platform firmware, but a number of systems didn't
+receive any more platform firmware updates.
+
+`commit 8e60615e89321 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") <https://git.kernel.org/torvalds/c/8e60615e89321>`_
+
+Hardware timeout
+----------------
+The hardware performs many actions besides accepting the values from
+amd-pmc driver.  As the communication path with the hardware is a mailbox,
+it's possible that it might not respond quickly enough.
+This issue manifested as a failure to suspend: ::
+
+  PM: dpm_run_callback(): acpi_subsys_suspend_noirq+0x0/0x50 returns -110
+  amd_pmc AMDI0005:00: PM: failed to suspend noirq: error -110
+
+The timing problem was identified by comparing the values of the idle mask.
+
+`commit 3c3c8e88c8712 ("platform/x86: amd-pmc: Increase the response register timeout") <https://git.kernel.org/torvalds/c/3c3c8e88c8712>`_
+
+Failed to reach hardware sleep state with panel on
+--------------------------------------------------
+On some Strix systems certain panels were observed to block the system from
+entering a hardware sleep state if the internal panel was on during the sequence.
+
+Even though the panel got turned off during suspend it exposed a timing problem
+where an interrupt caused the display hardware to wake up and block low power
+state entry.
+
+`commit 40b8c14936bd2 ("drm/amd/display: Disable unneeded hpd interrupts during dm_init") <https://git.kernel.org/torvalds/c/40b8c14936bd2>`_
+
+Runtime power consumption issues
+================================
+
+Runtime power consumption is influenced by many factors, including but not
+limited to the configuration of the PCIe Active State Power Management (ASPM),
+the display brightness, the EPP policy of the CPU, and the power management
+of the devices.
+
+ASPM
+----
+For the best runtime power consumption, ASPM should be programmed as intended
+by the BIOS from the hardware vendor.  To accomplish this the Linux kernel
+should be compiled with ``CONFIG_PCIEASPM_DEFAULT`` set to ``y`` and the
+sysfs file ``/sys/module/pcie_aspm/parameters/policy`` should not be modified.
+
+Most notably, if L1.2 is not configured properly for any devices, the SoC
+will not be able to enter the deepest idle state.
+
+EPP Policy
+----------
+The ``energy_performance_preference`` sysfs file can be used to set a bias
+of efficiency or performance for a CPU.  This has a direct relationship on
+the battery life when more heavily biased towards performance.
+
+
+BIOS debug messages
+===================
+
+Most OEM machines don't have a serial UART for outputting kernel or BIOS
+debug messages. However BIOS debug messages are useful for understanding
+both BIOS bugs and bugs with the Linux kernel drivers that call BIOS AML.
+
+As the BIOS on most OEM AMD systems are based off an AMD reference BIOS,
+the infrastructure used for exporting debugging messages is often the same
+as AMD reference BIOS.
+
+Manually Parsing
+----------------
+There is generally an ACPI method ``\M460`` that different paths of the AML
+will call to emit a message to the BIOS serial log. This method takes
+7 arguments, with the first being a string and the rest being optional
+integers::
+
+  Method (M460, 7, Serialized)
+
+Here is an example of a string that BIOS AML may call out using ``\M460``::
+
+  M460 ("  OEM-ASL-PCIe Address (0x%X)._REG (%d %d)  PCSA = %d\n", DADR, Arg0, Arg1, PCSA, Zero, Zero)
+
+Normally when executed, the ``\M460`` method would populate the additional
+arguments into the string.  In order to get these messages from the Linux
+kernel a hook has been added into ACPICA that can capture the *arguments*
+sent to ``\M460`` and print them to the kernel ring buffer.
+For example the following message could be emitted into kernel ring buffer::
+
+  extrace-0174 ex_trace_args         :  "  OEM-ASL-PCIe Address (0x%X)._REG (%d %d)  PCSA = %d\n", ec106000, 2, 1, 1, 0, 0
+
+In order to get these messages, you need to compile with ``CONFIG_ACPI_DEBUG``
+and then turn on the following ACPICA tracing parameters.
+This can be done either on the kernel command line or at runtime:
+
+* ``acpi.trace_method_name=\M460``
+* ``acpi.trace_state=method``
+
+NOTE: These can be very noisy at bootup. If you turn these parameters on
+the kernel command, please also consider turning up ``CONFIG_LOG_BUF_SHIFT``
+to a larger size such as 17 to avoid losing early boot messages.
+
+Tool assisted Parsing
+---------------------
+As mentioned above, parsing by hand can be tedious, especially with a lot of
+messages.  To help with this, a tool has been created at
+`amd-debug-tools <https://git.kernel.org/pub/scm/linux/kernel/git/superm1/amd-debug-tools.git/about/>`_
+to help parse the messages.
+
+Random reboot issues
+====================
+
+When a random reboot occurs, the high-level reason for the reboot is stored
+in a register that will persist onto the next boot.
+
+There are 6 classes of reasons for the reboot:
+ * Software induced
+ * Power state transition
+ * Pin induced
+ * Hardware induced
+ * Remote reset
+ * Internal CPU event
+
+.. csv-table::
+   :header: "Bit", "Type", "Reason"
+   :align: left
+
+   "0",  "Pin",      "thermal pin BP_THERMTRIP_L was tripped"
+   "1",  "Pin",      "power button was pressed for 4 seconds"
+   "2",  "Pin",      "shutdown pin was tripped"
+   "4",  "Remote",   "remote ASF power off command was received"
+   "9",  "Internal", "internal CPU thermal limit was tripped"
+   "16", "Pin",      "system reset pin BP_SYS_RST_L was tripped"
+   "17", "Software", "software issued PCI reset"
+   "18", "Software", "software wrote 0x4 to reset control register 0xCF9"
+   "19", "Software", "software wrote 0x6 to reset control register 0xCF9"
+   "20", "Software", "software wrote 0xE to reset control register 0xCF9"
+   "21", "ACPI-state", "ACPI power state transition occurred"
+   "22", "Pin",      "keyboard reset pin KB_RST_L was tripped"
+   "23", "Internal", "internal CPU shutdown event occurred"
+   "24", "Hardware", "system failed to boot before failed boot timer expired"
+   "25", "Hardware", "hardware watchdog timer expired"
+   "26", "Remote",   "remote ASF reset command was received"
+   "27", "Internal", "an uncorrected error caused a data fabric sync flood event"
+   "29", "Internal", "FCH and MP1 failed warm reset handshake"
+   "30", "Internal", "a parity error occurred"
+   "31", "Internal", "a software sync flood event occurred"
+
+This information is read by the kernel at bootup and printed into
+the syslog. When a random reboot occurs this message can be helpful
+to determine the next component to debug.
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/amd_hsmp.rst linux-libre-6.16-gnu/Documentation/arch/x86/amd_hsmp.rst
index 2fd917638e42..a094f55c10b0 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/amd_hsmp.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/amd_hsmp.rst
@@ -71,6 +71,28 @@ Note: lseek() is not supported as entire metrics table is read.
 Metrics table definitions will be documented as part of Public PPR.
 The same is defined in the amd_hsmp.h header.
 
+2. HSMP telemetry sysfs files
+
+Following sysfs files are available at /sys/devices/platform/AMDI0097:0X/.
+
+* c0_residency_input: Percentage of cores in C0 state.
+* prochot_status: Reports 1 if the processor is at thermal threshold value,
+  0 otherwise.
+* smu_fw_version: SMU firmware version.
+* protocol_version: HSMP interface version.
+* ddr_max_bw: Theoretical maximum DDR bandwidth in GB/s.
+* ddr_utilised_bw_input: Current utilized DDR bandwidth in GB/s.
+* ddr_utilised_bw_perc_input(%): Percentage of current utilized DDR bandwidth.
+* mclk_input: Memory clock in MHz.
+* fclk_input: Fabric clock in MHz.
+* clk_fmax: Maximum frequency of socket in MHz.
+* clk_fmin: Minimum frequency of socket in MHz.
+* cclk_freq_limit_input: Core clock frequency limit per socket in MHz.
+* pwr_current_active_freq_limit: Current active frequency limit of socket
+  in MHz.
+* pwr_current_active_freq_limit_source: Source of current active frequency
+  limit.
+
 ACPI device object format
 =========================
 The ACPI object format expected from the amd_hsmp driver
@@ -116,6 +138,14 @@ for socket with ID00 is given below::
 			})
 		}
 
+HSMP HWMON interface
+====================
+HSMP power sensors are registered with the hwmon interface. A separate hwmon
+directory is created for each socket and the following files are generated
+within the hwmon directory.
+- power1_input (read only)
+- power1_cap_max (read only)
+- power1_cap (read, write)
 
 An example
 ==========
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/cpuinfo.rst linux-libre-6.16-gnu/Documentation/arch/x86/cpuinfo.rst
index f80e2a558d2a..dd8b7806944e 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/cpuinfo.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/cpuinfo.rst
@@ -173,10 +173,10 @@ For example, when an old kernel is running on new hardware.
 The kernel disabled support for it at compile-time
 --------------------------------------------------
 
-For example, if 5-level-paging is not enabled when building (i.e.,
-CONFIG_X86_5LEVEL is not selected) the flag "la57" will not show up [#f1]_.
+For example, if Linear Address Masking (LAM) is not enabled when building (i.e.,
+CONFIG_ADDRESS_MASKING is not selected) the flag "lam" will not show up.
 Even though the feature will still be detected via CPUID, the kernel disables
-it by clearing via setup_clear_cpu_cap(X86_FEATURE_LA57).
+it by clearing via setup_clear_cpu_cap(X86_FEATURE_LAM).
 
 The feature is disabled at boot-time
 ------------------------------------
@@ -200,5 +200,3 @@ missing at runtime. For example, AVX flags will not show up if XSAVE feature
 is disabled since they depend on XSAVE feature. Another example would be broken
 CPUs and them missing microcode patches. Due to that, the kernel decides not to
 enable a feature.
-
-.. [#f1] 5-level paging uses linear address of 57 bits.
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/index.rst linux-libre-6.16-gnu/Documentation/arch/x86/index.rst
index 8ac64d7de4dc..8ea762494bcc 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/index.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/index.rst
@@ -25,13 +25,13 @@ x86-specific Documentation
    shstk
    iommu
    intel_txt
+   amd-debugging
    amd-memory-encryption
    amd_hsmp
    tdx
    pti
    mds
    microcode
-   resctrl
    tsx_async_abort
    buslock
    usb-legacy-support
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/mds.rst linux-libre-6.16-gnu/Documentation/arch/x86/mds.rst
index 5a2e6c0ef04a..3518671e1a85 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/mds.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/mds.rst
@@ -93,7 +93,7 @@ enters a C-state.
 
 The kernel provides a function to invoke the buffer clearing:
 
-    mds_clear_cpu_buffers()
+    x86_clear_cpu_buffers()
 
 Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
 Other than CFLAGS.ZF, this macro doesn't clobber any registers.
@@ -185,9 +185,9 @@ Mitigation points
    idle clearing would be a window dressing exercise and is therefore not
    activated.
 
-   The invocation is controlled by the static key mds_idle_clear which is
-   switched depending on the chosen mitigation mode and the SMT state of
-   the system.
+   The invocation is controlled by the static key cpu_buf_idle_clear which is
+   switched depending on the chosen mitigation mode and the SMT state of the
+   system.
 
    The buffer clear is only invoked before entering the C-State to prevent
    that stale data from the idling CPU from spilling to the Hyper-Thread
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/resume.svg linux-libre-6.16-gnu/Documentation/arch/x86/resume.svg
new file mode 100644
index 000000000000..ad8839f762bf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/arch/x86/resume.svg
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Do not edit this file with editors other than draw.io -->
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="582px" height="1152px" viewBox="-0.5 -0.5 582 1152" content="&lt;mxfile host=&quot;confluence.amd.com&quot; agent=&quot;Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/134.0.0.0 Safari/537.36 Edg/134.0.0.0&quot; version=&quot;24.7.10&quot; scale=&quot;1&quot; border=&quot;0&quot;&gt;&#10;  &lt;diagram id=&quot;lFF5s3GfZ4Py3fAf5dUH&quot; name=&quot;Page-1&quot;&gt;&#10;    &lt;mxGraphModel dx=&quot;2364&quot; dy=&quot;1473&quot; grid=&quot;1&quot; gridSize=&quot;10&quot; guides=&quot;1&quot; tooltips=&quot;1&quot; connect=&quot;1&quot; arrows=&quot;1&quot; fold=&quot;1&quot; page=&quot;0&quot; pageScale=&quot;1&quot; pageWidth=&quot;850&quot; pageHeight=&quot;1100&quot; math=&quot;0&quot; shadow=&quot;0&quot;&gt;&#10;      &lt;root&gt;&#10;        &lt;mxCell id=&quot;0&quot; /&gt;&#10;        &lt;mxCell id=&quot;1&quot; parent=&quot;0&quot; /&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-10&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-1&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-9&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-1&quot; value=&quot;Wakeup event occurs&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.start_2;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#0CF232;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-240&quot; y=&quot;-190&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-8&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-3&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-4&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-56&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-3&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-13&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-3&quot; value=&quot;MP1 hands off control to OS&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;-190&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-4&quot; value=&quot;&amp;lt;span style=&amp;quot;background-color: rgb(232, 205, 151);&amp;quot;&amp;gt;&amp;lt;span style=&amp;quot;color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: center; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; float: none; display: inline !important;&amp;quot;&amp;gt;OS Moves one core out of ACPI C3&amp;lt;/span&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&quot; style=&quot;verticalLabelPosition=middle;verticalAlign=middle;html=1;shape=process;whiteSpace=wrap;rounded=1;size=0.14;arcSize=6;labelPosition=center;align=center;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;240&quot; y=&quot;-170&quot; width=&quot;100&quot; height=&quot;60&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-11&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-9&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-3&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-9&quot; value=&quot;MP0/MP1 boot process&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-80&quot; y=&quot;-190&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-27&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-13&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-16&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-13&quot; value=&quot;OS checks all wake sources&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;-40&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-29&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-15&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-17&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-44&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-29&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.28&quot; y=&quot;2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;8&quot; y=&quot;-8&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-34&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-15&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-41&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-34&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.1165&quot; y=&quot;-1&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;153&quot; y=&quot;11&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-15&quot; value=&quot;ACPI fixed &amp;lt;br&amp;gt;event active&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;260&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-28&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-16&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-15&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-43&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-28&quot;&gt;&#10;          &lt;mxGeometry y=&quot;2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;8&quot; y=&quot;-15&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-57&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=1;entryY=0.5;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-16&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-58&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-57&quot;&gt;&#10;          &lt;mxGeometry x=&quot;0.0145&quot; y=&quot;1&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;102&quot; y=&quot;9&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-16&quot; value=&quot;IRQ other &amp;lt;br&amp;gt;than ACPI SCI active&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;110&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-30&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-17&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;130&quot; y=&quot;560&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-65&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-30&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.4694&quot; y=&quot;1&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;9&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-36&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-17&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-35&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-45&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-36&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.2867&quot; y=&quot;2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;5&quot; y=&quot;8&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-17&quot; value=&quot;GPIO&amp;lt;br&amp;gt;IRQ shared&amp;lt;br&amp;gt;with SCI&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;410&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-31&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;130&quot; y=&quot;660&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;130&quot; y=&quot;710&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-32&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-23&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;130&quot; y=&quot;810&quot; as=&quot;sourcePoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-48&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-32&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.1714&quot; y=&quot;-4&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;14&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-52&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-23&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-53&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-52&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.5259&quot; y=&quot;-5&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;220&quot; y=&quot;15&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-62&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-23&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-54&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-64&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-62&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.7472&quot; y=&quot;3&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-92&quot; y=&quot;13&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-23&quot; value=&quot;Any PM&amp;lt;br&amp;gt;wakeup event&amp;lt;br&amp;gt;pending&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;860&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-24&quot; value=&quot;Kernel resumes system&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.terminator;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#0CF232;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-240&quot; y=&quot;-20&quot; width=&quot;100&quot; height=&quot;60&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-26&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-24&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot; value=&quot;uPEP driver removes OS_HINT&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-240&quot; y=&quot;110&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-37&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-35&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-40&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-37&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.56&quot; y=&quot;-2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;67&quot; y=&quot;12&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-60&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=-0.008;entryY=0.422;entryDx=0;entryDy=0;exitX=0.5;exitY=1;exitDx=0;exitDy=0;exitPerimeter=0;entryPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-35&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-38&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-50&quot; y=&quot;535&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;20&quot; y=&quot;685&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-61&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-60&quot;&gt;&#10;          &lt;mxGeometry x=&quot;0.1126&quot; y=&quot;-3&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-16&quot; y=&quot;-85&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-35&quot; value=&quot;Any GPIO&amp;lt;br&amp;gt;w/ WAKESTS&amp;lt;br&amp;gt;active&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-90&quot; y=&quot;410&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-38&quot; value=&quot;Check for ACPI Notify() events&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;560&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-49&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-39&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-23&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-50&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-39&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-25&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-51&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];fontStyle=1;labelBackgroundColor=none;fontColor=#393C56;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;jeVlbFHk8Qahp5zcIn_D-50&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.4506&quot; y=&quot;-2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;215&quot; y=&quot;12&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-39&quot; value=&quot;Any GPE &amp;lt;br&amp;gt;pending&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;80&quot; y=&quot;710&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-63&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;jeVlbFHk8Qahp5zcIn_D-54&quot; target=&quot;jeVlbFHk8Qahp5zcIn_D-55&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-54&quot; value=&quot;OS moves active &amp;lt;br&amp;gt;core back to&amp;lt;br&amp;gt;ACPI C3&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;240&quot; y=&quot;110&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;jeVlbFHk8Qahp5zcIn_D-55&quot; value=&quot;MP1 puts system back to sleep&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.terminator;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F27979;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;240&quot; y=&quot;-20&quot; width=&quot;100&quot; height=&quot;60&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;      &lt;/root&gt;&#10;    &lt;/mxGraphModel&gt;&#10;  &lt;/diagram&gt;&#10;&lt;/mxfile&gt;&#10;"><defs/><g><g data-cell-id="0"><g data-cell-id="1"><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-10"><g><path d="M 101 51 L 154.63 51" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 159.88 51 L 152.88 54.5 L 154.63 51 L 152.88 47.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-1"><g><ellipse cx="51" cy="51" rx="50" ry="50" fill="#0cf232" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 51px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Wakeup event occurs</div></div></div></foreignObject><image x="2" y="37" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-8"><g><path d="M 421 51 L 474.63 51" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 479.88 51 L 472.88 54.5 L 474.63 51 L 472.88 47.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-56"><g><path d="M 371 101 L 371 144.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 149.88 L 367.5 142.88 L 371 144.63 L 374.5 142.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-3"><g><rect x="321" y="1" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 51px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">MP1 hands off control to OS</div></div></div></foreignObject><image x="322" y="37" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-4"><g><rect x="481" y="21" width="100" height="60" rx="3.6" ry="3.6" fill="#f2cc8f" stroke="#e07a5f" pointer-events="all"/><path d="M 495 21 L 495 81 M 567 21 L 567 81" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 51px; margin-left: 496px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;"><span style="background-color: rgb(232, 205, 151);"><span style="color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: center; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; float: none; display: inline !important;">OS Moves one core out of ACPI C3</span><br /></span></div></div></div></foreignObject><image x="496" y="30" width="70" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-11"><g><path d="M 261 51 L 314.63 51" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 319.88 51 L 312.88 54.5 L 314.63 51 L 312.88 47.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-9"><g><rect x="161" y="1" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 51px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">MP0/MP1 boot process</div></div></div></foreignObject><image x="162" y="37" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-27"><g><path d="M 371 251 L 371 294.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 299.88 L 367.5 292.88 L 371 294.63 L 374.5 292.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-13"><g><rect x="321" y="151" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 201px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">OS checks all wake sources</div></div></div></foreignObject><image x="322" y="187" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-29"><g><path d="M 371 551 L 371 594.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 599.88 L 367.5 592.88 L 371 594.63 L 374.5 592.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-44"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 562px; margin-left: 382px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="375.5" y="556" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-34"><g><path d="M 321 501 L 51 501 L 51 407.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 402.12 L 54.5 409.12 L 51 407.37 L 47.5 409.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-41"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 512px; margin-left: 312px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="303" y="506" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-15"><g><path d="M 371 451 L 421 501 L 371 551 L 321 501 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 501px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">ACPI fixed <br />event active</div></div></div></foreignObject><image x="322" y="487" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-28"><g><path d="M 371 401 L 371 444.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 449.88 L 367.5 442.88 L 371 444.63 L 374.5 442.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-43"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 412px; margin-left: 382px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="375.5" y="406" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-57"><g><path d="M 321 351 L 107.37 351" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 102.12 351 L 109.12 347.5 L 107.37 351 L 109.12 354.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-58"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 362px; margin-left: 312px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="303" y="356" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-16"><g><path d="M 371 301 L 421 351 L 371 401 L 321 351 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 351px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">IRQ other <br />than ACPI SCI active</div></div></div></foreignObject><image x="322" y="330" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-30"><g><path d="M 371 701 L 371 726 L 371 744.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 749.88 L 367.5 742.88 L 371 744.63 L 374.5 742.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-65"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 715px; margin-left: 382px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="375.5" y="709" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-36"><g><path d="M 321 651 L 257.37 651" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 252.12 651 L 259.12 647.5 L 257.37 651 L 259.12 654.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-45"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 662px; margin-left: 302px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="293" y="656" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-17"><g><path d="M 371 601 L 421 651 L 371 701 L 321 651 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 651px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">GPIO<br />IRQ shared<br />with SCI</div></div></div></foreignObject><image x="322" y="630" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-31"><g><path d="M 371 851 L 371 894.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 899.88 L 367.5 892.88 L 371 894.63 L 374.5 892.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-32"><g><path d="M 371 1001 L 371.5 1026.5 L 371.13 1044.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371.02 1049.88 L 367.67 1042.81 L 371.13 1044.63 L 374.66 1042.96 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-48"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 1023px; margin-left: 382px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="375.5" y="1017" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-52"><g><path d="M 321 1101 L 51 1101 L 51 407.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 402.12 L 54.5 409.12 L 51 407.37 L 47.5 409.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-53"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 1112px; margin-left: 312px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="303" y="1106" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-62"><g><path d="M 421 1101 L 531 1101 L 531 407.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 531 402.12 L 534.5 409.12 L 531 407.37 L 527.5 409.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-64"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 1112px; margin-left: 432px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="425.5" y="1106" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-23"><g><path d="M 371 1051 L 421 1101 L 371 1151 L 321 1101 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 1101px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Any PM<br />wakeup event<br />pending</div></div></div></foreignObject><image x="322" y="1080" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-24"><g><path d="M 31.61 171 L 70.39 171 C 87.29 171 101 184.43 101 201 C 101 217.57 87.29 231 70.39 231 L 31.61 231 C 14.71 231 1 217.57 1 201 C 1 184.43 14.71 171 31.61 171 Z" fill="#0cf232" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 201px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Kernel resumes system</div></div></div></foreignObject><image x="2" y="187" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-26"><g><path d="M 51 301 L 51 237.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 232.12 L 54.5 239.12 L 51 237.37 L 47.5 239.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-25"><g><rect x="1" y="301" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 351px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">uPEP driver removes OS_HINT</div></div></div></foreignObject><image x="2" y="330" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-37"><g><path d="M 151 651 L 51 651 L 51 407.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 402.12 L 54.5 409.12 L 51 407.37 L 47.5 409.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-40"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 662px; margin-left: 142px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="133" y="656" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-60"><g><path d="M 201 701 L 201 793.2 L 313.83 793.2" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 319.08 793.2 L 312.08 796.7 L 313.83 793.2 L 312.08 789.7 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-61"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 712px; margin-left: 211px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="204.5" y="706" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-35"><g><path d="M 201 601 L 251 651 L 201 701 L 151 651 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 651px; margin-left: 152px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Any GPIO<br />w/ WAKESTS<br />active</div></div></div></foreignObject><image x="152" y="630" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-38"><g><rect x="321" y="751" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 801px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Check for ACPI Notify() events</div></div></div></foreignObject><image x="322" y="787" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-49"><g><path d="M 371 1001 L 371 1044.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 371 1049.88 L 367.5 1042.88 L 371 1044.63 L 374.5 1042.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-50"><g><path d="M 321 951 L 51 951 L 51 407.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 402.12 L 54.5 409.12 L 51 407.37 L 47.5 409.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-51"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 962px; margin-left: 312px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="303" y="956" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-39"><g><path d="M 371 901 L 421 951 L 371 1001 L 321 951 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 951px; margin-left: 322px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Any GPE <br />pending</div></div></div></foreignObject><image x="322" y="937" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-63"><g><path d="M 531 301 L 531 237.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 531 232.12 L 534.5 239.12 L 531 237.37 L 527.5 239.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-54"><g><rect x="481" y="301" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 351px; margin-left: 482px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">OS moves active <br />core back to<br />ACPI C3</div></div></div></foreignObject><image x="482" y="330" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="jeVlbFHk8Qahp5zcIn_D-55"><g><path d="M 511.61 171 L 550.39 171 C 567.29 171 581 184.43 581 201 C 581 217.57 567.29 231 550.39 231 L 511.61 231 C 494.71 231 481 217.57 481 201 C 481 184.43 494.71 171 511.61 171 Z" fill="#f27979" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 201px; margin-left: 482px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">MP1 puts system back to sleep</div></div></div></foreignObject><image x="482" y="187" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g></g></g></g></svg>
\ No newline at end of file
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/suspend.svg linux-libre-6.16-gnu/Documentation/arch/x86/suspend.svg
new file mode 100644
index 000000000000..a69073c018d5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/arch/x86/suspend.svg
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Do not edit this file with editors other than draw.io -->
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="407px" height="1132px" viewBox="-0.5 -0.5 407 1132" content="&lt;mxfile host=&quot;confluence.amd.com&quot; agent=&quot;Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/134.0.0.0 Safari/537.36 Edg/134.0.0.0&quot; version=&quot;24.7.10&quot; scale=&quot;1&quot; border=&quot;0&quot;&gt;&#10;  &lt;diagram id=&quot;46NsKM0iVOHTgNer6hpB&quot; name=&quot;Page-1&quot;&gt;&#10;    &lt;mxGraphModel dx=&quot;1964&quot; dy=&quot;1073&quot; grid=&quot;1&quot; gridSize=&quot;10&quot; guides=&quot;1&quot; tooltips=&quot;1&quot; connect=&quot;1&quot; arrows=&quot;1&quot; fold=&quot;1&quot; page=&quot;0&quot; pageScale=&quot;1&quot; pageWidth=&quot;850&quot; pageHeight=&quot;1100&quot; math=&quot;0&quot; shadow=&quot;0&quot;&gt;&#10;      &lt;root&gt;&#10;        &lt;mxCell id=&quot;0&quot; /&gt;&#10;        &lt;mxCell id=&quot;1&quot; parent=&quot;0&quot; /&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-21&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-4&quot; target=&quot;8N6JJebqrzA787TgpwUj-12&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-4&quot; value=&quot;SFH driver notifies MP2 to stop all sensor collection&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;420&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-6&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=0;entryDx=0;entryDy=0;exitX=0.5;exitY=1;exitDx=0;exitDy=0;exitPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-51&quot; target=&quot;8N6JJebqrzA787TgpwUj-4&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;330&quot; y=&quot;400&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;170&quot; y=&quot;450&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-37&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-6&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.2133&quot; y=&quot;-1&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-22&quot; y=&quot;16&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-9&quot; value=&quot;Abort suspend; details logged in dmesg&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.terminator;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F27979;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;425&quot; y=&quot;140&quot; width=&quot;100&quot; height=&quot;60&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-12&quot; value=&quot;Failures?&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;280&quot; y=&quot;420&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-18&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;entryPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; target=&quot;8N6JJebqrzA787TgpwUj-9&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;380&quot; y=&quot;320&quot; as=&quot;sourcePoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-19&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-18&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.3265&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-27&quot; y=&quot;10&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-24&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=0;entryDx=0;entryDy=0;exitX=0.5;exitY=1;exitDx=0;exitDy=0;exitPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-12&quot; target=&quot;8N6JJebqrzA787TgpwUj-28&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;340&quot; y=&quot;570&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;180&quot; y=&quot;620&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-38&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-24&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.0038&quot; y=&quot;2&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint y=&quot;13&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-26&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;entryPerimeter=0;exitX=1;exitY=0.5;exitDx=0;exitDy=0;exitPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-12&quot; target=&quot;8N6JJebqrzA787TgpwUj-9&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;410&quot; y=&quot;530&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;555&quot; y=&quot;230&quot; as=&quot;targetPoint&quot; /&gt;&#10;            &lt;Array as=&quot;points&quot;&gt;&#10;              &lt;mxPoint x=&quot;475&quot; y=&quot;470&quot; /&gt;&#10;            &lt;/Array&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-35&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-26&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.7458&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-1&quot; y=&quot;10&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-30&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-28&quot; target=&quot;8N6JJebqrzA787TgpwUj-29&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-28&quot; value=&quot;All devices go into deepest D-state or F-state&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;570&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-29&quot; value=&quot;Failures?&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;280&quot; y=&quot;570&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-31&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;exitPerimeter=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-29&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;330&quot; y=&quot;760&quot; as=&quot;sourcePoint&quot; /&gt;&#10;            &lt;mxPoint x=&quot;170&quot; y=&quot;720&quot; as=&quot;targetPoint&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-64&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];strokeColor=#E07A5F;fontColor=#393C56;fillColor=#F2CC8F;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-31&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.0683&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint y=&quot;15&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-34&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;entryPerimeter=0;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-29&quot; target=&quot;8N6JJebqrzA787TgpwUj-9&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-36&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-34&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.8315&quot; y=&quot;-1&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;2&quot; y=&quot;9&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-46&quot; value=&quot;GPIO driver suspends non-wake GPIOs&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;720&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-47&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-48&quot; target=&quot;8N6JJebqrzA787TgpwUj-50&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-48&quot; value=&quot;Suspend initiated from userspace&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.start_2;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#0CF232;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;120&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-49&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-50&quot; target=&quot;8N6JJebqrzA787TgpwUj-51&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-50&quot; value=&quot;GPU driver shuts down clocks and sends SMU messages&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;270&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-51&quot; value=&quot;Failures?&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;280&quot; y=&quot;270&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-53&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-54&quot; target=&quot;8N6JJebqrzA787TgpwUj-56&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-54&quot; value=&quot;ACPI s2idle driver notifies EC using _DSM&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;870&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-55&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-56&quot; target=&quot;8N6JJebqrzA787TgpwUj-58&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-56&quot; value=&quot;uPEP driver (amd-pmc) sends OS_HINT&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;1010&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-57&quot; value=&quot;&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;labelBackgroundColor=none;strokeColor=#E07A5F;fontColor=default;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-58&quot; target=&quot;8N6JJebqrzA787TgpwUj-59&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-58&quot; value=&quot;Put all x86 CPU cores into ACPI C3&quot; style=&quot;rounded=1;whiteSpace=wrap;html=1;absoluteArcSize=1;arcSize=14;strokeWidth=2;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;120&quot; y=&quot;1150&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-59&quot; value=&quot;s2idle loop waiting for IRQ &amp;lt;br&amp;gt;to wake&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.terminator;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#0CF232;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;280&quot; y=&quot;1170&quot; width=&quot;100&quot; height=&quot;60&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-65&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;exitX=0.5;exitY=1;exitDx=0;exitDy=0;exitPerimeter=0;entryX=0.5;entryY=0;entryDx=0;entryDy=0;strokeColor=#E07A5F;fontColor=#393C56;fillColor=#F2CC8F;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-60&quot; target=&quot;8N6JJebqrzA787TgpwUj-54&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-66&quot; value=&quot;no&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];strokeColor=#E07A5F;fontColor=#393C56;fillColor=#F2CC8F;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;8N6JJebqrzA787TgpwUj-65&quot;&gt;&#10;          &lt;mxGeometry x=&quot;-0.144&quot; y=&quot;-4&quot; relative=&quot;1&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-4&quot; y=&quot;14&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-60&quot; value=&quot;Failures?&quot; style=&quot;strokeWidth=2;html=1;shape=mxgraph.flowchart.decision;whiteSpace=wrap;labelBackgroundColor=none;fillColor=#F2CC8F;strokeColor=#E07A5F;fontColor=#393C56;&quot; vertex=&quot;1&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;280&quot; y=&quot;720&quot; width=&quot;100&quot; height=&quot;100&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-61&quot; style=&quot;edgeStyle=orthogonalEdgeStyle;rounded=0;orthogonalLoop=1;jettySize=auto;html=1;entryX=0.5;entryY=1;entryDx=0;entryDy=0;entryPerimeter=0;strokeColor=#E07A5F;fontColor=#393C56;fillColor=#F2CC8F;&quot; edge=&quot;1&quot; parent=&quot;1&quot; source=&quot;8N6JJebqrzA787TgpwUj-60&quot; target=&quot;8N6JJebqrzA787TgpwUj-9&quot;&gt;&#10;          &lt;mxGeometry relative=&quot;1&quot; as=&quot;geometry&quot; /&gt;&#10;        &lt;/mxCell&gt;&#10;        &lt;mxCell id=&quot;8N6JJebqrzA787TgpwUj-62&quot; value=&quot;yes&quot; style=&quot;edgeLabel;html=1;align=center;verticalAlign=middle;resizable=0;points=[];labelBackgroundColor=none;fontColor=#393C56;fontStyle=1;&quot; vertex=&quot;1&quot; connectable=&quot;0&quot; parent=&quot;1&quot;&gt;&#10;          &lt;mxGeometry x=&quot;440&quot; y=&quot;620&quot; as=&quot;geometry&quot;&gt;&#10;            &lt;mxPoint x=&quot;-14&quot; y=&quot;160&quot; as=&quot;offset&quot; /&gt;&#10;          &lt;/mxGeometry&gt;&#10;        &lt;/mxCell&gt;&#10;      &lt;/root&gt;&#10;    &lt;/mxGraphModel&gt;&#10;  &lt;/diagram&gt;&#10;&lt;/mxfile&gt;&#10;"><defs/><g><g data-cell-id="0"><g data-cell-id="1"><g data-cell-id="8N6JJebqrzA787TgpwUj-21"><g><path d="M 101 351 L 154.63 351" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 159.88 351 L 152.88 354.5 L 154.63 351 L 152.88 347.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-4"><g><rect x="1" y="301" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 351px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">SFH driver notifies MP2 to stop all sensor collection</div></div></div></foreignObject><image x="2" y="322.5" width="98" height="61" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-6"><g><path d="M 211 251 L 211 276 L 51 276 L 51 294.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 299.88 L 47.5 292.88 L 51 294.63 L 54.5 292.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-37"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 292px; margin-left: 132px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="125.5" y="286" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-9"><g><path d="M 336.61 21 L 375.39 21 C 392.29 21 406 34.43 406 51 C 406 67.57 392.29 81 375.39 81 L 336.61 81 C 319.71 81 306 67.57 306 51 C 306 34.43 319.71 21 336.61 21 Z" fill="#f27979" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 51px; margin-left: 307px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Abort suspend; details logged in dmesg</div></div></div></foreignObject><image x="307" y="30" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-12"><g><path d="M 211 301 L 261 351 L 211 401 L 161 351 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 351px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Failures?</div></div></div></foreignObject><image x="162" y="344.5" width="98" height="17" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-18"><g><path d="M 261 201 L 356 201.5 L 356 87.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 356 82.12 L 359.5 89.12 L 356 87.37 L 352.5 89.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-19"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 212px; margin-left: 307px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="298" y="206" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-24"><g><path d="M 211 401 L 211 426 L 51 426 L 51 444.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 449.88 L 47.5 442.88 L 51 444.63 L 54.5 442.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-38"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 442px; margin-left: 132px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">no</div></div></div></foreignObject><image x="125.5" y="436" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-26"><g><path d="M 261 351 L 356 351 L 356 87.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 356 82.12 L 359.5 89.12 L 356 87.37 L 352.5 89.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-35"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 362px; margin-left: 307px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="298" y="356" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-30"><g><path d="M 101 501 L 154.63 501" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 159.88 501 L 152.88 504.5 L 154.63 501 L 152.88 497.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-28"><g><rect x="1" y="451" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 501px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">All devices go into deepest D-state or F-state</div></div></div></foreignObject><image x="2" y="480" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-29"><g><path d="M 211 451 L 261 501 L 211 551 L 161 501 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 501px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Failures?</div></div></div></foreignObject><image x="162" y="494.5" width="98" height="17" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-31"><g><path d="M 211 551 L 211 576 L 51.5 576 L 51.13 594.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51.02 599.88 L 47.66 592.81 L 51.13 594.63 L 54.66 592.95 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-64"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 592px; margin-left: 139px;"><div data-drawio-colors="color: #393C56; background-color: rgb(255, 255, 255); " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; background-color: rgb(255, 255, 255); white-space: nowrap;">no</div></div></div></foreignObject><image x="132.5" y="586" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-34"><g><path d="M 261 501 L 356 501 L 356 87.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 356 82.12 L 359.5 89.12 L 356 87.37 L 352.5 89.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-36"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 512px; margin-left: 307px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="298" y="506" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-46"><g><rect x="1" y="601" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 651px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">GPIO driver suspends non-wake GPIOs</div></div></div></foreignObject><image x="2" y="630" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-47"><g><path d="M 51 101 L 51 144.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 149.88 L 47.5 142.88 L 51 144.63 L 54.5 142.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-48"><g><ellipse cx="51" cy="51" rx="50" ry="50" fill="#0cf232" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 51px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Suspend initiated from userspace</div></div></div></foreignObject><image x="2" y="37" width="98" height="32" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-49"><g><path d="M 101 201 L 154.63 201" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 159.88 201 L 152.88 204.5 L 154.63 201 L 152.88 197.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-50"><g><rect x="1" y="151" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 201px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">GPU driver shuts down clocks and sends SMU messages</div></div></div></foreignObject><image x="2" y="172.5" width="98" height="61" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-51"><g><path d="M 211 151 L 261 201 L 211 251 L 161 201 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 201px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Failures?</div></div></div></foreignObject><image x="162" y="194.5" width="98" height="17" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-53"><g><path d="M 51 851 L 51 884.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 889.88 L 47.5 882.88 L 51 884.63 L 54.5 882.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-54"><g><rect x="1" y="751" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 801px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">ACPI s2idle driver notifies EC using _DSM</div></div></div></foreignObject><image x="2" y="780" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-55"><g><path d="M 51 991 L 51 1024.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 1029.88 L 47.5 1022.88 L 51 1024.63 L 54.5 1022.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-56"><g><rect x="1" y="891" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 941px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">uPEP driver (amd-pmc) sends OS_HINT</div></div></div></foreignObject><image x="2" y="920" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-57"><g><path d="M 101 1081 L 154.63 1081" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 159.88 1081 L 152.88 1084.5 L 154.63 1081 L 152.88 1077.5 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-58"><g><rect x="1" y="1031" width="100" height="100" rx="7" ry="7" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 1081px; margin-left: 2px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Put all x86 CPU cores into ACPI C3</div></div></div></foreignObject><image x="2" y="1060" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-59"><g><path d="M 191.61 1051 L 230.39 1051 C 247.29 1051 261 1064.43 261 1081 C 261 1097.57 247.29 1111 230.39 1111 L 191.61 1111 C 174.71 1111 161 1097.57 161 1081 C 161 1064.43 174.71 1051 191.61 1051 Z" fill="#0cf232" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 1081px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">s2idle loop waiting for IRQ <br />to wake</div></div></div></foreignObject><image x="162" y="1060" width="98" height="46" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-65"><g><path d="M 211 701 L 211 726 L 51 726 L 51 744.63" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 51 749.88 L 47.5 742.88 L 51 744.63 L 54.5 742.88 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g><g data-cell-id="8N6JJebqrzA787TgpwUj-66"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 737px; margin-left: 143px;"><div data-drawio-colors="color: #393C56; background-color: rgb(255, 255, 255); " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; background-color: rgb(255, 255, 255); white-space: nowrap;">no</div></div></div></foreignObject><image x="136.5" y="731" width="13" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-60"><g><path d="M 211 601 L 261 651 L 211 701 L 161 651 Z" fill="#f2cc8f" stroke="#e07a5f" stroke-width="2" stroke-miterlimit="10" pointer-events="all"/></g><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 651px; margin-left: 162px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Failures?</div></div></div></foreignObject><image x="162" y="644.5" width="98" height="17" xlink:href="data:image/png;base64, "/></switch></g></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-61"><g><path d="M 261 651 L 356 651 L 356 87.37" fill="none" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="stroke"/><path d="M 356 82.12 L 359.5 89.12 L 356 87.37 L 352.5 89.12 Z" fill="#e07a5f" stroke="#e07a5f" stroke-miterlimit="10" pointer-events="all"/></g></g><g data-cell-id="8N6JJebqrzA787TgpwUj-62"><g><g transform="translate(-0.5 -0.5)"><switch><foreignObject pointer-events="none" width="100%" height="100%" requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility" style="overflow: visible; text-align: left;"><div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 662px; margin-left: 308px;"><div data-drawio-colors="color: #393C56; " style="box-sizing: border-box; font-size: 0px; text-align: center;"><div style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(57, 60, 86); line-height: 1.2; pointer-events: all; font-weight: bold; white-space: nowrap;">yes</div></div></div></foreignObject><image x="299" y="656" width="18" height="15.75" xlink:href="data:image/png;base64, "/></switch></g></g></g></g></g></g></svg>
\ No newline at end of file
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/x86_64/5level-paging.rst linux-libre-6.16-gnu/Documentation/arch/x86/x86_64/5level-paging.rst
index 71f882f4a173..ad7ddc13f79d 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/x86_64/5level-paging.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/x86_64/5level-paging.rst
@@ -22,15 +22,6 @@ QEMU 2.9 and later support 5-level paging.
 Virtual memory layout for 5-level paging is described in
 Documentation/arch/x86/x86_64/mm.rst
 
-
-Enabling 5-level paging
-=======================
-CONFIG_X86_5LEVEL=y enables the feature.
-
-Kernel with CONFIG_X86_5LEVEL=y still able to boot on 4-level hardware.
-In this case additional page table level -- p4d -- will be folded at
-runtime.
-
 User-space and large virtual address space
 ==========================================
 On x86, 5-level paging enables 56-bit userspace virtual address space.
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/x86_64/fsgs.rst linux-libre-6.16-gnu/Documentation/arch/x86/x86_64/fsgs.rst
index d07e445dac5c..6bda4d16d3f7 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/x86_64/fsgs.rst
+++ linux-libre-6.16-gnu/Documentation/arch/x86/x86_64/fsgs.rst
@@ -130,7 +130,7 @@ instructions. Clang 5 supports them as well.
 
   =================== ===========================
   _readfsbase_u64()   Read the FS base register
-  _readfsbase_u64()   Read the GS base register
+  _readgsbase_u64()   Read the GS base register
   _writefsbase_u64()  Write the FS base register
   _writegsbase_u64()  Write the GS base register
   =================== ===========================
diff --git linux-libre-6.15-gnu/Documentation/block/ublk.rst linux-libre-6.16-gnu/Documentation/block/ublk.rst
index 854f823b46c2..8c4030bcabb6 100644
--- linux-libre-6.15-gnu/Documentation/block/ublk.rst
+++ linux-libre-6.16-gnu/Documentation/block/ublk.rst
@@ -115,15 +115,15 @@ managing and controlling ublk devices with help of several control commands:
 
 - ``UBLK_CMD_START_DEV``
 
-  After the server prepares userspace resources (such as creating per-queue
-  pthread & io_uring for handling ublk IO), this command is sent to the
+  After the server prepares userspace resources (such as creating I/O handler
+  threads & io_uring for handling ublk IO), this command is sent to the
   driver for allocating & exposing ``/dev/ublkb*``. Parameters set via
   ``UBLK_CMD_SET_PARAMS`` are applied for creating the device.
 
 - ``UBLK_CMD_STOP_DEV``
 
   Halt IO on ``/dev/ublkb*`` and remove the device. When this command returns,
-  ublk server will release resources (such as destroying per-queue pthread &
+  ublk server will release resources (such as destroying I/O handler threads &
   io_uring).
 
 - ``UBLK_CMD_DEL_DEV``
@@ -208,15 +208,15 @@ managing and controlling ublk devices with help of several control commands:
   modify how I/O is handled while the ublk server is dying/dead (this is called
   the ``nosrv`` case in the driver code).
 
-  With just ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
-  handler) is dying, ublk does not delete ``/dev/ublkb*`` during the whole
+  With just ``UBLK_F_USER_RECOVERY`` set, after the ublk server exits,
+  ublk does not delete ``/dev/ublkb*`` during the whole
   recovery stage and ublk device ID is kept. It is ublk server's
   responsibility to recover the device context by its own knowledge.
   Requests which have not been issued to userspace are requeued. Requests
   which have been issued to userspace are aborted.
 
-  With ``UBLK_F_USER_RECOVERY_REISSUE`` additionally set, after one ubq_daemon
-  (ublk server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
+  With ``UBLK_F_USER_RECOVERY_REISSUE`` additionally set, after the ublk server
+  exits, contrary to ``UBLK_F_USER_RECOVERY``,
   requests which have been issued to userspace are requeued and will be
   re-issued to the new process after handling ``UBLK_CMD_END_USER_RECOVERY``.
   ``UBLK_F_USER_RECOVERY_REISSUE`` is designed for backends who tolerate
@@ -241,10 +241,11 @@ can be controlled/accessed just inside this container.
 Data plane
 ----------
 
-ublk server needs to create per-queue IO pthread & io_uring for handling IO
-commands via io_uring passthrough. The per-queue IO pthread
-focuses on IO handling and shouldn't handle any control & management
-tasks.
+The ublk server should create dedicated threads for handling I/O. Each
+thread should have its own io_uring through which it is notified of new
+I/O, and through which it can complete I/O. These dedicated threads
+should focus on IO handling and shouldn't handle any control &
+management tasks.
 
 The's IO is assigned by a unique tag, which is 1:1 mapping with IO
 request of ``/dev/ublkb*``.
@@ -265,6 +266,18 @@ with specified IO tag in the command data:
   destined to ``/dev/ublkb*``. This command is sent only once from the server
   IO pthread for ublk driver to setup IO forward environment.
 
+  Once a thread issues this command against a given (qid,tag) pair, the thread
+  registers itself as that I/O's daemon. In the future, only that I/O's daemon
+  is allowed to issue commands against the I/O. If any other thread attempts
+  to issue a command against a (qid,tag) pair for which the thread is not the
+  daemon, the command will fail. Daemons can be reset only be going through
+  recovery.
+
+  The ability for every (qid,tag) pair to have its own independent daemon task
+  is indicated by the ``UBLK_F_PER_IO_DAEMON`` feature. If this feature is not
+  supported by the driver, daemons must be per-queue instead - i.e. all I/Os
+  associated to a single qid must be handled by the same task.
+
 - ``UBLK_IO_COMMIT_AND_FETCH_REQ``
 
   When an IO request is destined to ``/dev/ublkb*``, the driver stores
@@ -339,6 +352,83 @@ For reaching best IO performance, ublk server should align its segment
 parameter of `struct ublk_param_segment` with backend for avoiding
 unnecessary IO split, which usually hurts io_uring performance.
 
+Auto Buffer Registration
+------------------------
+
+The ``UBLK_F_AUTO_BUF_REG`` feature automatically handles buffer registration
+and unregistration for I/O requests, which simplifies the buffer management
+process and reduces overhead in the ublk server implementation.
+
+This is another feature flag for using zero copy, and it is compatible with
+``UBLK_F_SUPPORT_ZERO_COPY``.
+
+Feature Overview
+~~~~~~~~~~~~~~~~
+
+This feature automatically registers request buffers to the io_uring context
+before delivering I/O commands to the ublk server and unregisters them when
+completing I/O commands. This eliminates the need for manual buffer
+registration/unregistration via ``UBLK_IO_REGISTER_IO_BUF`` and
+``UBLK_IO_UNREGISTER_IO_BUF`` commands, then IO handling in ublk server
+can avoid dependency on the two uring_cmd operations.
+
+IOs can't be issued concurrently to io_uring if there is any dependency
+among these IOs. So this way not only simplifies ublk server implementation,
+but also makes concurrent IO handling becomes possible by removing the
+dependency on buffer registration & unregistration commands.
+
+Usage Requirements
+~~~~~~~~~~~~~~~~~~
+
+1. The ublk server must create a sparse buffer table on the same ``io_ring_ctx``
+   used for ``UBLK_IO_FETCH_REQ`` and ``UBLK_IO_COMMIT_AND_FETCH_REQ``. If
+   uring_cmd is issued on a different ``io_ring_ctx``, manual buffer
+   unregistration is required.
+
+2. Buffer registration data must be passed via uring_cmd's ``sqe->addr`` with the
+   following structure::
+
+    struct ublk_auto_buf_reg {
+        __u16 index;      /* Buffer index for registration */
+        __u8 flags;       /* Registration flags */
+        __u8 reserved0;   /* Reserved for future use */
+        __u32 reserved1;  /* Reserved for future use */
+    };
+
+   ublk_auto_buf_reg_to_sqe_addr() is for converting the above structure into
+   ``sqe->addr``.
+
+3. All reserved fields in ``ublk_auto_buf_reg`` must be zeroed.
+
+4. Optional flags can be passed via ``ublk_auto_buf_reg.flags``.
+
+Fallback Behavior
+~~~~~~~~~~~~~~~~~
+
+If auto buffer registration fails:
+
+1. When ``UBLK_AUTO_BUF_REG_FALLBACK`` is enabled:
+
+   - The uring_cmd is completed
+   - ``UBLK_IO_F_NEED_REG_BUF`` is set in ``ublksrv_io_desc.op_flags``
+   - The ublk server must manually deal with the failure, such as, register
+     the buffer manually, or using user copy feature for retrieving the data
+     for handling ublk IO
+
+2. If fallback is not enabled:
+
+   - The ublk I/O request fails silently
+   - The uring_cmd won't be completed
+
+Limitations
+~~~~~~~~~~~
+
+- Requires same ``io_ring_ctx`` for all operations
+- May require manual buffer management in fallback cases
+- io_ring_ctx buffer table has a max size of 16K, which may not be enough
+  in case that too many ublk devices are handled by this single io_ring_ctx
+  and each one has very large queue depth
+
 References
 ==========
 
diff --git linux-libre-6.15-gnu/Documentation/bpf/bpf_iterators.rst linux-libre-6.16-gnu/Documentation/bpf/bpf_iterators.rst
index 7f514cb6b052..189e3ec1c6c8 100644
--- linux-libre-6.15-gnu/Documentation/bpf/bpf_iterators.rst
+++ linux-libre-6.16-gnu/Documentation/bpf/bpf_iterators.rst
@@ -2,10 +2,117 @@
 BPF Iterators
 =============
 
+--------
+Overview
+--------
+
+BPF supports two separate entities collectively known as "BPF iterators": BPF
+iterator *program type* and *open-coded* BPF iterators. The former is
+a stand-alone BPF program type which, when attached and activated by user,
+will be called once for each entity (task_struct, cgroup, etc) that is being
+iterated. The latter is a set of BPF-side APIs implementing iterator
+functionality and available across multiple BPF program types. Open-coded
+iterators provide similar functionality to BPF iterator programs, but gives
+more flexibility and control to all other BPF program types. BPF iterator
+programs, on the other hand, can be used to implement anonymous or BPF
+FS-mounted special files, whose contents are generated by attached BPF iterator
+program, backed by seq_file functionality. Both are useful depending on
+specific needs.
+
+When adding a new BPF iterator program, it is expected that similar
+functionality will be added as open-coded iterator for maximum flexibility.
+It's also expected that iteration logic and code will be maximally shared and
+reused between two iterator API surfaces.
 
-----------
-Motivation
-----------
+------------------------
+Open-coded BPF Iterators
+------------------------
+
+Open-coded BPF iterators are implemented as tightly-coupled trios of kfuncs
+(constructor, next element fetch, destructor) and iterator-specific type
+describing on-the-stack iterator state, which is guaranteed by the BPF
+verifier to not be tampered with outside of the corresponding
+constructor/destructor/next APIs.
+
+Each kind of open-coded BPF iterator has its own associated
+struct bpf_iter_<type>, where <type> denotes a specific type of iterator.
+bpf_iter_<type> state needs to live on BPF program stack, so make sure it's
+small enough to fit on BPF stack. For performance reasons its best to avoid
+dynamic memory allocation for iterator state and size the state struct big
+enough to fit everything necessary. But if necessary, dynamic memory
+allocation is a way to bypass BPF stack limitations. Note, state struct size
+is part of iterator's user-visible API, so changing it will break backwards
+compatibility, so be deliberate about designing it.
+
+All kfuncs (constructor, next, destructor) have to be named consistently as
+bpf_iter_<type>_{new,next,destroy}(), respectively. <type> represents iterator
+type, and iterator state should be represented as a matching
+`struct bpf_iter_<type>` state type. Also, all iter kfuncs should have
+a pointer to this `struct bpf_iter_<type>` as the very first argument.
+
+Additionally:
+  - Constructor, i.e., `bpf_iter_<type>_new()`, can have arbitrary extra
+    number of arguments. Return type is not enforced either.
+  - Next method, i.e., `bpf_iter_<type>_next()`, has to return a pointer
+    type and should have exactly one argument: `struct bpf_iter_<type> *`
+    (const/volatile/restrict and typedefs are ignored).
+  - Destructor, i.e., `bpf_iter_<type>_destroy()`, should return void and
+    should have exactly one argument, similar to the next method.
+  - `struct bpf_iter_<type>` size is enforced to be positive and
+    a multiple of 8 bytes (to fit stack slots correctly).
+
+Such strictness and consistency allows to build generic helpers abstracting
+important, but boilerplate, details to be able to use open-coded iterators
+effectively and ergonomically (see libbpf's bpf_for_each() macro). This is
+enforced at kfunc registration point by the kernel.
+
+Constructor/next/destructor implementation contract is as follows:
+  - constructor, `bpf_iter_<type>_new()`, always initializes iterator state on
+    the stack. If any of the input arguments are invalid, constructor should
+    make sure to still initialize it such that subsequent next() calls will
+    return NULL. I.e., on error, *return error and construct empty iterator*.
+    Constructor kfunc is marked with KF_ITER_NEW flag.
+
+  - next method, `bpf_iter_<type>_next()`, accepts pointer to iterator state
+    and produces an element. Next method should always return a pointer. The
+    contract between BPF verifier is that next method *guarantees* that it
+    will eventually return NULL when elements are exhausted. Once NULL is
+    returned, subsequent next calls *should keep returning NULL*. Next method
+    is marked with KF_ITER_NEXT (and should also have KF_RET_NULL as
+    NULL-returning kfunc, of course).
+
+  - destructor, `bpf_iter_<type>_destroy()`, is always called once. Even if
+    constructor failed or next returned nothing.  Destructor frees up any
+    resources and marks stack space used by `struct bpf_iter_<type>` as usable
+    for something else. Destructor is marked with KF_ITER_DESTROY flag.
+
+Any open-coded BPF iterator implementation has to implement at least these
+three methods. It is enforced that for any given type of iterator only
+applicable constructor/destructor/next are callable. I.e., verifier ensures
+you can't pass number iterator state into, say, cgroup iterator's next method.
+
+From a 10,000-feet BPF verification point of view, next methods are the points
+of forking a verification state, which are conceptually similar to what
+verifier is doing when validating conditional jumps. Verifier is branching out
+`call bpf_iter_<type>_next` instruction and simulates two outcomes: NULL
+(iteration is done) and non-NULL (new element is returned). NULL is simulated
+first and is supposed to reach exit without looping. After that non-NULL case
+is validated and it either reaches exit (for trivial examples with no real
+loop), or reaches another `call bpf_iter_<type>_next` instruction with the
+state equivalent to already (partially) validated one. State equivalency at
+that point means we technically are going to be looping forever without
+"breaking out" out of established "state envelope" (i.e., subsequent
+iterations don't add any new knowledge or constraints to the verifier state,
+so running 1, 2, 10, or a million of them doesn't matter). But taking into
+account the contract stating that iterator next method *has to* return NULL
+eventually, we can conclude that loop body is safe and will eventually
+terminate. Given we validated logic outside of the loop (NULL case), and
+concluded that loop body is safe (though potentially looping many times),
+verifier can claim safety of the overall program logic.
+
+------------------------
+BPF Iterators Motivation
+------------------------
 
 There are a few existing ways to dump kernel data into user space. The most
 popular one is the ``/proc`` system. For example, ``cat /proc/net/tcp6`` dumps
@@ -323,8 +430,8 @@ Now, in the userspace program, pass the pointer of struct to the
 
 ::
 
-  link = bpf_program__attach_iter(prog, &opts); iter_fd =
-  bpf_iter_create(bpf_link__fd(link));
+  link = bpf_program__attach_iter(prog, &opts);
+  iter_fd = bpf_iter_create(bpf_link__fd(link));
 
 If both *tid* and *pid* are zero, an iterator created from this struct
 ``bpf_iter_attach_opts`` will include every opened file of every task in the
diff --git linux-libre-6.15-gnu/Documentation/bpf/kfuncs.rst linux-libre-6.16-gnu/Documentation/bpf/kfuncs.rst
index a8f5782bd833..ae468b781d31 100644
--- linux-libre-6.15-gnu/Documentation/bpf/kfuncs.rst
+++ linux-libre-6.16-gnu/Documentation/bpf/kfuncs.rst
@@ -160,6 +160,23 @@ Or::
                 ...
         }
 
+2.2.6 __prog Annotation
+---------------------------
+This annotation is used to indicate that the argument needs to be fixed up to
+the bpf_prog_aux of the caller BPF program. Any value passed into this argument
+is ignored, and rewritten by the verifier.
+
+An example is given below::
+
+        __bpf_kfunc int bpf_wq_set_callback_impl(struct bpf_wq *wq,
+                                                 int (callback_fn)(void *map, int *key, void *value),
+                                                 unsigned int flags,
+                                                 void *aux__prog)
+         {
+                struct bpf_prog_aux *aux = aux__prog;
+                ...
+         }
+
 .. _BPF_kfunc_nodef:
 
 2.3 Using an existing kernel function
diff --git linux-libre-6.15-gnu/Documentation/bpf/map_hash.rst linux-libre-6.16-gnu/Documentation/bpf/map_hash.rst
index d2343952f2cb..8606bf958a8c 100644
--- linux-libre-6.15-gnu/Documentation/bpf/map_hash.rst
+++ linux-libre-6.16-gnu/Documentation/bpf/map_hash.rst
@@ -233,10 +233,16 @@ attempts in order to enforce the LRU property which have increasing impacts on
 other CPUs involved in the following operation attempts:
 
 - Attempt to use CPU-local state to batch operations
-- Attempt to fetch free nodes from global lists
+- Attempt to fetch ``target_free`` free nodes from global lists
 - Attempt to pull any node from a global list and remove it from the hashmap
 - Attempt to pull any node from any CPU's list and remove it from the hashmap
 
+The number of nodes to borrow from the global list in a batch, ``target_free``,
+depends on the size of the map. Larger batch size reduces lock contention, but
+may also exhaust the global structure. The value is computed at map init to
+avoid exhaustion, by limiting aggregate reservation by all CPUs to half the map
+size. With a minimum of a single element and maximum budget of 128 at a time.
+
 This algorithm is described visually in the following diagram. See the
 description in commit 3a08c2fd7634 ("bpf: LRU List") for a full explanation of
 the corresponding operations:
diff --git linux-libre-6.15-gnu/Documentation/bpf/map_lru_hash_update.dot linux-libre-6.16-gnu/Documentation/bpf/map_lru_hash_update.dot
index a0fee349d29c..ab10058f5b79 100644
--- linux-libre-6.15-gnu/Documentation/bpf/map_lru_hash_update.dot
+++ linux-libre-6.16-gnu/Documentation/bpf/map_lru_hash_update.dot
@@ -35,18 +35,18 @@ digraph {
   fn_bpf_lru_list_pop_free_to_local [shape=rectangle,fillcolor=2,
     label="Flush local pending,
     Rotate Global list, move
-    LOCAL_FREE_TARGET
+    target_free
     from global -> local"]
   // Also corresponds to:
   // fn__local_list_flush()
   // fn_bpf_lru_list_rotate()
   fn___bpf_lru_node_move_to_free[shape=diamond,fillcolor=2,
-    label="Able to free\nLOCAL_FREE_TARGET\nnodes?"]
+    label="Able to free\ntarget_free\nnodes?"]
 
   fn___bpf_lru_list_shrink_inactive [shape=rectangle,fillcolor=3,
     label="Shrink inactive list
       up to remaining
-      LOCAL_FREE_TARGET
+      target_free
       (global LRU -> local)"]
   fn___bpf_lru_list_shrink [shape=diamond,fillcolor=2,
     label="> 0 entries in\nlocal free list?"]
diff --git linux-libre-6.15-gnu/Documentation/conf.py linux-libre-6.16-gnu/Documentation/conf.py
index 3dad1f90b098..12de52a2b17e 100644
--- linux-libre-6.15-gnu/Documentation/conf.py
+++ linux-libre-6.16-gnu/Documentation/conf.py
@@ -28,16 +28,6 @@ def have_command(cmd):
     """
     return shutil.which(cmd) is not None
 
-# Get Sphinx version
-major, minor, patch = sphinx.version_info[:3]
-
-#
-# Warn about older versions that we don't want to support for much
-# longer.
-#
-if (major < 2) or (major == 2 and minor < 4):
-    print('WARNING: support for Sphinx < 2.4 will be removed soon.')
-
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
@@ -57,76 +47,71 @@ extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
               'maintainers_include', 'sphinx.ext.autosectionlabel',
               'kernel_abi', 'kernel_feat', 'translations']
 
-if major >= 3:
-    if (major > 3) or (minor > 0 or patch >= 2):
-        # Sphinx c function parser is more pedantic with regards to type
-        # checking. Due to that, having macros at c:function cause problems.
-        # Those needed to be scaped by using c_id_attributes[] array
-        c_id_attributes = [
-            # GCC Compiler types not parsed by Sphinx:
-            "__restrict__",
-
-            # include/linux/compiler_types.h:
-            "__iomem",
-            "__kernel",
-            "noinstr",
-            "notrace",
-            "__percpu",
-            "__rcu",
-            "__user",
-            "__force",
-            "__counted_by_le",
-            "__counted_by_be",
-
-            # include/linux/compiler_attributes.h:
-            "__alias",
-            "__aligned",
-            "__aligned_largest",
-            "__always_inline",
-            "__assume_aligned",
-            "__cold",
-            "__attribute_const__",
-            "__copy",
-            "__pure",
-            "__designated_init",
-            "__visible",
-            "__printf",
-            "__scanf",
-            "__gnu_inline",
-            "__malloc",
-            "__mode",
-            "__no_caller_saved_registers",
-            "__noclone",
-            "__nonstring",
-            "__noreturn",
-            "__packed",
-            "__pure",
-            "__section",
-            "__always_unused",
-            "__maybe_unused",
-            "__used",
-            "__weak",
-            "noinline",
-            "__fix_address",
-            "__counted_by",
-
-            # include/linux/memblock.h:
-            "__init_memblock",
-            "__meminit",
-
-            # include/linux/init.h:
-            "__init",
-            "__ref",
-
-            # include/linux/linkage.h:
-            "asmlinkage",
-
-            # include/linux/btf.h
-            "__bpf_kfunc",
-        ]
-
-else:
-    extensions.append('cdomain')
+# Since Sphinx version 3, the C function parser is more pedantic with regards
+# to type checking. Due to that, having macros at c:function cause problems.
+# Those needed to be escaped by using c_id_attributes[] array
+c_id_attributes = [
+    # GCC Compiler types not parsed by Sphinx:
+    "__restrict__",
+
+    # include/linux/compiler_types.h:
+    "__iomem",
+    "__kernel",
+    "noinstr",
+    "notrace",
+    "__percpu",
+    "__rcu",
+    "__user",
+    "__force",
+    "__counted_by_le",
+    "__counted_by_be",
+
+    # include/linux/compiler_attributes.h:
+    "__alias",
+    "__aligned",
+    "__aligned_largest",
+    "__always_inline",
+    "__assume_aligned",
+    "__cold",
+    "__attribute_const__",
+    "__copy",
+    "__pure",
+    "__designated_init",
+    "__visible",
+    "__printf",
+    "__scanf",
+    "__gnu_inline",
+    "__malloc",
+    "__mode",
+    "__no_caller_saved_registers",
+    "__noclone",
+    "__nonstring",
+    "__noreturn",
+    "__packed",
+    "__pure",
+    "__section",
+    "__always_unused",
+    "__maybe_unused",
+    "__used",
+    "__weak",
+    "noinline",
+    "__fix_address",
+    "__counted_by",
+
+    # include/linux/memblock.h:
+    "__init_memblock",
+    "__meminit",
+
+    # include/linux/init.h:
+    "__init",
+    "__ref",
+
+    # include/linux/linkage.h:
+    "asmlinkage",
+
+    # include/linux/btf.h
+    "__bpf_kfunc",
+]
 
 # Ensure that autosectionlabel will produce unique names
 autosectionlabel_prefix_document = True
@@ -149,10 +134,6 @@ if 'SPHINX_IMGMATH' in os.environ:
     else:
         sys.stderr.write("Unknown env SPHINX_IMGMATH=%s ignored.\n" % env_sphinx_imgmath)
 
-# Always load imgmath for Sphinx <1.8 or for epub docs
-load_imgmath = (load_imgmath or (major == 1 and minor < 8)
-                or 'epub' in sys.argv)
-
 if load_imgmath:
     extensions.append("sphinx.ext.imgmath")
     math_renderer = 'imgmath'
@@ -322,14 +303,6 @@ if "DOCS_CSS" in os.environ:
     for l in css:
         html_css_files.append(l)
 
-if major <= 1 and minor < 8:
-    html_context = {
-        'css_files': [],
-    }
-
-    for l in html_css_files:
-        html_context['css_files'].append('_static/' + l)
-
 if  html_theme == 'alabaster':
     html_theme_options = {
         'description': get_cline_version(),
@@ -409,11 +382,6 @@ latex_elements = {
     ''',
 }
 
-# Fix reference escape troubles with Sphinx 1.4.x
-if major == 1:
-    latex_elements['preamble']  += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
-
-
 # Load kerneldoc specific LaTeX settings
 latex_elements['preamble'] += '''
         % Load kerneldoc specific LaTeX settings
@@ -540,7 +508,7 @@ pdf_documents = [
 # kernel-doc extension configuration for running Sphinx directly (e.g. by Read
 # the Docs). In a normal build, these are supplied from the Makefile via command
 # line arguments.
-kerneldoc_bin = '../scripts/kernel-doc'
+kerneldoc_bin = '../scripts/kernel-doc.py'
 kerneldoc_srctree = '..'
 
 # ------------------------------------------------------------------------------
diff --git linux-libre-6.15-gnu/Documentation/core-api/dma-api.rst linux-libre-6.16-gnu/Documentation/core-api/dma-api.rst
index 8e3cce3d0a23..2ad08517e626 100644
--- linux-libre-6.15-gnu/Documentation/core-api/dma-api.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/dma-api.rst
@@ -530,6 +530,77 @@ routines, e.g.:::
 		....
 	}
 
+Part Ie - IOVA-based DMA mappings
+---------------------------------
+
+These APIs allow a very efficient mapping when using an IOMMU.  They are an
+optional path that requires extra code and are only recommended for drivers
+where DMA mapping performance, or the space usage for storing the DMA addresses
+matter.  All the considerations from the previous section apply here as well.
+
+::
+
+    bool dma_iova_try_alloc(struct device *dev, struct dma_iova_state *state,
+		phys_addr_t phys, size_t size);
+
+Is used to try to allocate IOVA space for mapping operation.  If it returns
+false this API can't be used for the given device and the normal streaming
+DMA mapping API should be used.  The ``struct dma_iova_state`` is allocated
+by the driver and must be kept around until unmap time.
+
+::
+
+    static inline bool dma_use_iova(struct dma_iova_state *state)
+
+Can be used by the driver to check if the IOVA-based API is used after a
+call to dma_iova_try_alloc.  This can be useful in the unmap path.
+
+::
+
+    int dma_iova_link(struct device *dev, struct dma_iova_state *state,
+		phys_addr_t phys, size_t offset, size_t size,
+		enum dma_data_direction dir, unsigned long attrs);
+
+Is used to link ranges to the IOVA previously allocated.  The start of all
+but the first call to dma_iova_link for a given state must be aligned
+to the DMA merge boundary returned by ``dma_get_merge_boundary())``, and
+the size of all but the last range must be aligned to the DMA merge boundary
+as well.
+
+::
+
+    int dma_iova_sync(struct device *dev, struct dma_iova_state *state,
+		size_t offset, size_t size);
+
+Must be called to sync the IOMMU page tables for IOVA-range mapped by one or
+more calls to ``dma_iova_link()``.
+
+For drivers that use a one-shot mapping, all ranges can be unmapped and the
+IOVA freed by calling:
+
+::
+
+   void dma_iova_destroy(struct device *dev, struct dma_iova_state *state,
+		size_t mapped_len, enum dma_data_direction dir,
+                unsigned long attrs);
+
+Alternatively drivers can dynamically manage the IOVA space by unmapping
+and mapping individual regions.  In that case
+
+::
+
+    void dma_iova_unlink(struct device *dev, struct dma_iova_state *state,
+		size_t offset, size_t size, enum dma_data_direction dir,
+		unsigned long attrs);
+
+is used to unmap a range previously mapped, and
+
+::
+
+   void dma_iova_free(struct device *dev, struct dma_iova_state *state);
+
+is used to free the IOVA space.  All regions must have been unmapped using
+``dma_iova_unlink()`` before calling ``dma_iova_free()``.
 
 Part II - Non-coherent DMA allocations
 --------------------------------------
diff --git linux-libre-6.15-gnu/Documentation/core-api/folio_queue.rst linux-libre-6.16-gnu/Documentation/core-api/folio_queue.rst
index 1fe7a9bc4b8d..83cfbc157e49 100644
--- linux-libre-6.15-gnu/Documentation/core-api/folio_queue.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/folio_queue.rst
@@ -151,19 +151,16 @@ The marks can be set by::
 
 	void folioq_mark(struct folio_queue *folioq, unsigned int slot);
 	void folioq_mark2(struct folio_queue *folioq, unsigned int slot);
-	void folioq_mark3(struct folio_queue *folioq, unsigned int slot);
 
 Cleared by::
 
 	void folioq_unmark(struct folio_queue *folioq, unsigned int slot);
 	void folioq_unmark2(struct folio_queue *folioq, unsigned int slot);
-	void folioq_unmark3(struct folio_queue *folioq, unsigned int slot);
 
 And the marks can be queried by::
 
 	bool folioq_is_marked(const struct folio_queue *folioq, unsigned int slot);
 	bool folioq_is_marked2(const struct folio_queue *folioq, unsigned int slot);
-	bool folioq_is_marked3(const struct folio_queue *folioq, unsigned int slot);
 
 The marks can be used for any purpose and are not interpreted by this API.
 
diff --git linux-libre-6.15-gnu/Documentation/core-api/genericirq.rst linux-libre-6.16-gnu/Documentation/core-api/genericirq.rst
index 25f94dfd66fa..582bde9bf5a9 100644
--- linux-libre-6.15-gnu/Documentation/core-api/genericirq.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/genericirq.rst
@@ -410,8 +410,6 @@ which are used in the generic IRQ layer.
 .. kernel-doc:: include/linux/interrupt.h
    :internal:
 
-.. kernel-doc:: include/linux/irqdomain.h
-
 Public Functions Provided
 =========================
 
diff --git linux-libre-6.15-gnu/Documentation/core-api/index.rst linux-libre-6.16-gnu/Documentation/core-api/index.rst
index e9789bd381d8..7a4ca18ca6e2 100644
--- linux-libre-6.15-gnu/Documentation/core-api/index.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/index.rst
@@ -115,6 +115,7 @@ more memory-management documentation in Documentation/mm/index.rst.
    pin_user_pages
    boot-time-mm
    gfp_mask-from-fs-io
+   kho/index
 
 Interfaces for kernel debugging
 ===============================
diff --git linux-libre-6.15-gnu/Documentation/core-api/irq/concepts.rst linux-libre-6.16-gnu/Documentation/core-api/irq/concepts.rst
index 4273806a606b..7c4564f3cbdf 100644
--- linux-libre-6.15-gnu/Documentation/core-api/irq/concepts.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/irq/concepts.rst
@@ -2,23 +2,24 @@
 What is an IRQ?
 ===============
 
-An IRQ is an interrupt request from a device.
-Currently they can come in over a pin, or over a packet.
-Several devices may be connected to the same pin thus
-sharing an IRQ.
+An IRQ is an interrupt request from a device. Currently, they can come
+in over a pin, or over a packet. Several devices may be connected to
+the same pin thus sharing an IRQ. Such as on legacy PCI bus: All devices
+typically share 4 lanes/pins. Note that each device can request an
+interrupt on each of the lanes.
 
 An IRQ number is a kernel identifier used to talk about a hardware
-interrupt source.  Typically this is an index into the global irq_desc
-array, but except for what linux/interrupt.h implements the details
-are architecture specific.
+interrupt source. Typically, this is an index into the global irq_desc
+array or sparse_irqs tree. But except for what linux/interrupt.h
+implements, the details are architecture specific.
 
 An IRQ number is an enumeration of the possible interrupt sources on a
-machine.  Typically what is enumerated is the number of input pins on
-all of the interrupt controller in the system.  In the case of ISA
-what is enumerated are the 16 input pins on the two i8259 interrupt
-controllers.
+machine. Typically, what is enumerated is the number of input pins on
+all of the interrupt controllers in the system. In the case of ISA,
+what is enumerated are the 8 input pins on each of the two i8259
+interrupt controllers.
 
 Architectures can assign additional meaning to the IRQ numbers, and
-are encouraged to in the case  where there is any manual configuration
-of the hardware involved.  The ISA IRQs are a classic example of
+are encouraged to in the case where there is any manual configuration
+of the hardware involved. The ISA IRQs are a classic example of
 assigning this kind of additional meaning.
diff --git linux-libre-6.15-gnu/Documentation/core-api/irq/irq-domain.rst linux-libre-6.16-gnu/Documentation/core-api/irq/irq-domain.rst
index f88a6ee67a35..a01c6ead1bc0 100644
--- linux-libre-6.15-gnu/Documentation/core-api/irq/irq-domain.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/irq/irq-domain.rst
@@ -1,59 +1,77 @@
 ===============================================
-The irq_domain interrupt number mapping library
+The irq_domain Interrupt Number Mapping Library
 ===============================================
 
 The current design of the Linux kernel uses a single large number
-space where each separate IRQ source is assigned a different number.
-This is simple when there is only one interrupt controller, but in
-systems with multiple interrupt controllers the kernel must ensure
+space where each separate IRQ source is assigned a unique number.
+This is simple when there is only one interrupt controller. But in
+systems with multiple interrupt controllers, the kernel must ensure
 that each one gets assigned non-overlapping allocations of Linux
 IRQ numbers.
 
 The number of interrupt controllers registered as unique irqchips
-show a rising tendency: for example subdrivers of different kinds
+shows a rising tendency. For example, subdrivers of different kinds
 such as GPIO controllers avoid reimplementing identical callback
 mechanisms as the IRQ core system by modelling their interrupt
-handlers as irqchips, i.e. in effect cascading interrupt controllers.
+handlers as irqchips. I.e. in effect cascading interrupt controllers.
 
-Here the interrupt number loose all kind of correspondence to
-hardware interrupt numbers: whereas in the past, IRQ numbers could
-be chosen so they matched the hardware IRQ line into the root
-interrupt controller (i.e. the component actually fireing the
-interrupt line to the CPU) nowadays this number is just a number.
+So in the past, IRQ numbers could be chosen so that they match the
+hardware IRQ line into the root interrupt controller (i.e. the
+component actually firing the interrupt line to the CPU). Nowadays,
+this number is just a number and the number loose all kind of
+correspondence to hardware interrupt numbers.
 
-For this reason we need a mechanism to separate controller-local
-interrupt numbers, called hardware irq's, from Linux IRQ numbers.
+For this reason, we need a mechanism to separate controller-local
+interrupt numbers, called hardware IRQs, from Linux IRQ numbers.
 
 The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of
-irq numbers, but they don't provide any support for reverse mapping of
+IRQ numbers, but they don't provide any support for reverse mapping of
 the controller-local IRQ (hwirq) number into the Linux IRQ number
 space.
 
-The irq_domain library adds mapping between hwirq and IRQ numbers on
-top of the irq_alloc_desc*() API.  An irq_domain to manage mapping is
-preferred over interrupt controller drivers open coding their own
+The irq_domain library adds a mapping between hwirq and IRQ numbers on
+top of the irq_alloc_desc*() API. An irq_domain to manage the mapping
+is preferred over interrupt controller drivers open coding their own
 reverse mapping scheme.
 
-irq_domain also implements translation from an abstract irq_fwspec
-structure to hwirq numbers (Device Tree and ACPI GSI so far), and can
-be easily extended to support other IRQ topology data sources.
+irq_domain also implements a translation from an abstract struct
+irq_fwspec to hwirq numbers (Device Tree, non-DT firmware node, ACPI
+GSI, and software node so far), and can be easily extended to support
+other IRQ topology data sources. The implementation is performed
+without any extra platform support code.
 
-irq_domain usage
+irq_domain Usage
 ================
-
-An interrupt controller driver creates and registers an irq_domain by
-calling one of the irq_domain_add_*() or irq_domain_create_*() functions
-(each mapping method has a different allocator function, more on that later).
-The function will return a pointer to the irq_domain on success. The caller
-must provide the allocator function with an irq_domain_ops structure.
+struct irq_domain could be defined as an irq domain controller. That
+is, it handles the mapping between hardware and virtual interrupt
+numbers for a given interrupt domain. The domain structure is
+generally created by the PIC code for a given PIC instance (though a
+domain can cover more than one PIC if they have a flat number model).
+It is the domain callbacks that are responsible for setting the
+irq_chip on a given irq_desc after it has been mapped.
+
+The host code and data structures use a fwnode_handle pointer to
+identify the domain. In some cases, and in order to preserve source
+code compatibility, this fwnode pointer is "upgraded" to a DT
+device_node. For those firmware infrastructures that do not provide a
+unique identifier for an interrupt controller, the irq_domain code
+offers a fwnode allocator.
+
+An interrupt controller driver creates and registers a struct irq_domain
+by calling one of the irq_domain_create_*() functions (each mapping
+method has a different allocator function, more on that later). The
+function will return a pointer to the struct irq_domain on success. The
+caller must provide the allocator function with a struct irq_domain_ops
+pointer.
 
 In most cases, the irq_domain will begin empty without any mappings
 between hwirq and IRQ numbers.  Mappings are added to the irq_domain
 by calling irq_create_mapping() which accepts the irq_domain and a
-hwirq number as arguments.  If a mapping for the hwirq doesn't already
-exist then it will allocate a new Linux irq_desc, associate it with
-the hwirq, and call the .map() callback so the driver can perform any
-required hardware setup.
+hwirq number as arguments. If a mapping for the hwirq doesn't already
+exist, irq_create_mapping() allocates a new Linux irq_desc, associates
+it with the hwirq, and calls the :c:member:`irq_domain_ops.map()`
+callback. In there, the driver can perform any required hardware
+setup.
 
 Once a mapping has been established, it can be retrieved or used via a
 variety of methods:
@@ -63,8 +81,6 @@ variety of methods:
   mapping.
 - irq_find_mapping() returns a Linux IRQ number for a given domain and
   hwirq number, and 0 if there was no mapping
-- irq_linear_revmap() is now identical to irq_find_mapping(), and is
-  deprecated
 - generic_handle_domain_irq() handles an interrupt described by a
   domain and a hwirq number
 
@@ -77,9 +93,10 @@ be allocated.
 
 If the driver has the Linux IRQ number or the irq_data pointer, and
 needs to know the associated hwirq number (such as in the irq_chip
-callbacks) then it can be directly obtained from irq_data->hwirq.
+callbacks) then it can be directly obtained from
+:c:member:`irq_data.hwirq`.
 
-Types of irq_domain mappings
+Types of irq_domain Mappings
 ============================
 
 There are several mechanisms available for reverse mapping from hwirq
@@ -92,7 +109,6 @@ Linear
 
 ::
 
-	irq_domain_add_linear()
 	irq_domain_create_linear()
 
 The linear reverse map maintains a fixed size table indexed by the
@@ -105,19 +121,13 @@ map are fixed time lookup for IRQ numbers, and irq_descs are only
 allocated for in-use IRQs.  The disadvantage is that the table must be
 as large as the largest possible hwirq number.
 
-irq_domain_add_linear() and irq_domain_create_linear() are functionally
-equivalent, except for the first argument is different - the former
-accepts an Open Firmware specific 'struct device_node', while the latter
-accepts a more general abstraction 'struct fwnode_handle'.
-
-The majority of drivers should use the linear map.
+The majority of drivers should use the Linear map.
 
 Tree
 ----
 
 ::
 
-	irq_domain_add_tree()
 	irq_domain_create_tree()
 
 The irq_domain maintains a radix tree map from hwirq numbers to Linux
@@ -129,11 +139,6 @@ since it doesn't need to allocate a table as large as the largest
 hwirq number.  The disadvantage is that hwirq to IRQ number lookup is
 dependent on how many entries are in the table.
 
-irq_domain_add_tree() and irq_domain_create_tree() are functionally
-equivalent, except for the first argument is different - the former
-accepts an Open Firmware specific 'struct device_node', while the latter
-accepts a more general abstraction 'struct fwnode_handle'.
-
 Very few drivers should need this mapping.
 
 No Map
@@ -141,7 +146,7 @@ No Map
 
 ::
 
-	irq_domain_add_nomap()
+	irq_domain_create_nomap()
 
 The No Map mapping is to be used when the hwirq number is
 programmable in the hardware.  In this case it is best to program the
@@ -159,8 +164,6 @@ Legacy
 
 ::
 
-	irq_domain_add_simple()
-	irq_domain_add_legacy()
 	irq_domain_create_simple()
 	irq_domain_create_legacy()
 
@@ -189,13 +192,13 @@ supported.  For example, ISA controllers would use the legacy map for
 mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
 numbers.
 
-Most users of legacy mappings should use irq_domain_add_simple() or
-irq_domain_create_simple() which will use a legacy domain only if an IRQ range
-is supplied by the system and will otherwise use a linear domain mapping.
-The semantics of this call are such that if an IRQ range is specified then
-descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() or
-irq_domain_create_linear() which means *no* irq descriptors will be allocated.
+Most users of legacy mappings should use irq_domain_create_simple()
+which will use a legacy domain only if an IRQ range is supplied by the
+system and will otherwise use a linear domain mapping. The semantics of
+this call are such that if an IRQ range is specified then descriptors
+will be allocated on-the-fly for it, and if no range is specified it
+will fall through to irq_domain_create_linear() which means *no* irq
+descriptors will be allocated.
 
 A typical use case for simple domains is where an irqchip provider
 is supporting both dynamic and static IRQ assignments.
@@ -206,13 +209,7 @@ that the driver using the simple domain call irq_create_mapping()
 before any irq_find_mapping() since the latter will actually work
 for the static IRQ assignment case.
 
-irq_domain_add_simple() and irq_domain_create_simple() as well as
-irq_domain_add_legacy() and irq_domain_create_legacy() are functionally
-equivalent, except for the first argument is different - the former
-accepts an Open Firmware specific 'struct device_node', while the latter
-accepts a more general abstraction 'struct fwnode_handle'.
-
-Hierarchy IRQ domain
+Hierarchy IRQ Domain
 --------------------
 
 On some architectures, there may be multiple interrupt controllers
@@ -253,20 +250,40 @@ There are four major interfaces to use hierarchy irq_domain:
 4) irq_domain_deactivate_irq(): deactivate interrupt controller hardware
    to stop delivering the interrupt.
 
-Following changes are needed to support hierarchy irq_domain:
+The following is needed to support hierarchy irq_domain:
 
-1) a new field 'parent' is added to struct irq_domain; it's used to
+1) The :c:member:`parent` field in struct irq_domain is used to
    maintain irq_domain hierarchy information.
-2) a new field 'parent_data' is added to struct irq_data; it's used to
-   build hierarchy irq_data to match hierarchy irq_domains. The irq_data
-   is used to store irq_domain pointer and hardware irq number.
-3) new callbacks are added to struct irq_domain_ops to support hierarchy
-   irq_domain operations.
-
-With support of hierarchy irq_domain and hierarchy irq_data ready, an
-irq_domain structure is built for each interrupt controller, and an
+2) The :c:member:`parent_data` field in struct irq_data is used to
+   build hierarchy irq_data to match hierarchy irq_domains. The
+   irq_data is used to store irq_domain pointer and hardware irq
+   number.
+3) The :c:member:`alloc()`, :c:member:`free()`, and other callbacks in
+   struct irq_domain_ops to support hierarchy irq_domain operations.
+
+With the support of hierarchy irq_domain and hierarchy irq_data ready,
+an irq_domain structure is built for each interrupt controller, and an
 irq_data structure is allocated for each irq_domain associated with an
-IRQ. Now we could go one step further to support stacked(hierarchy)
+IRQ.
+
+For an interrupt controller driver to support hierarchy irq_domain, it
+needs to:
+
+1) Implement irq_domain_ops.alloc() and irq_domain_ops.free()
+2) Optionally, implement irq_domain_ops.activate() and
+   irq_domain_ops.deactivate().
+3) Optionally, implement an irq_chip to manage the interrupt controller
+   hardware.
+4) There is no need to implement irq_domain_ops.map() and
+   irq_domain_ops.unmap(). They are unused with hierarchy irq_domain.
+
+Note the hierarchy irq_domain is in no way x86-specific, and is
+heavily used to support other architectures, such as ARM, ARM64 etc.
+
+Stacked irq_chip
+~~~~~~~~~~~~~~~~
+
+Now, we could go one step further to support stacked (hierarchy)
 irq_chip. That is, an irq_chip is associated with each irq_data along
 the hierarchy. A child irq_chip may implement a required action by
 itself or by cooperating with its parent irq_chip.
@@ -276,22 +293,28 @@ with the hardware managed by itself and may ask for services from its
 parent irq_chip when needed. So we could achieve a much cleaner
 software architecture.
 
-For an interrupt controller driver to support hierarchy irq_domain, it
-needs to:
-
-1) Implement irq_domain_ops.alloc and irq_domain_ops.free
-2) Optionally implement irq_domain_ops.activate and
-   irq_domain_ops.deactivate.
-3) Optionally implement an irq_chip to manage the interrupt controller
-   hardware.
-4) No need to implement irq_domain_ops.map and irq_domain_ops.unmap,
-   they are unused with hierarchy irq_domain.
-
-Hierarchy irq_domain is in no way x86 specific, and is heavily used to
-support other architectures, such as ARM, ARM64 etc.
-
 Debugging
 =========
 
 Most of the internals of the IRQ subsystem are exposed in debugfs by
 turning CONFIG_GENERIC_IRQ_DEBUGFS on.
+
+Structures and Public Functions Provided
+========================================
+
+This chapter contains the autogenerated documentation of the structures
+and exported kernel API functions which are used for IRQ domains.
+
+.. kernel-doc:: include/linux/irqdomain.h
+
+.. kernel-doc:: kernel/irq/irqdomain.c
+   :export:
+
+Internal Functions Provided
+===========================
+
+This chapter contains the autogenerated documentation of the internal
+functions.
+
+.. kernel-doc:: kernel/irq/irqdomain.c
+   :internal:
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/bindings/kho.yaml linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/kho.yaml
new file mode 100644
index 000000000000..11e8ab7b219d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/kho.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+title: Kexec HandOver (KHO) root tree
+
+maintainers:
+  - Mike Rapoport <rppt@kernel.org>
+  - Changyuan Lyu <changyuanl@google.com>
+
+description: |
+  System memory preserved by KHO across kexec.
+
+properties:
+  compatible:
+    enum:
+      - kho-v1
+
+  preserved-memory-map:
+    description: |
+      physical address (u64) of an in-memory structure describing all preserved
+      folios and memory ranges.
+
+patternProperties:
+  "$[0-9a-f_]+^":
+    $ref: sub-fdt.yaml#
+    description: physical address of a KHO user's own FDT.
+
+required:
+  - compatible
+  - preserved-memory-map
+
+additionalProperties: false
+
+examples:
+  - |
+    kho {
+        compatible = "kho-v1";
+        preserved-memory-map = <0xf0be16 0x1000000>;
+
+        memblock {
+                fdt = <0x80cc16 0x1000000>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/bindings/memblock/memblock.yaml linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/memblock/memblock.yaml
new file mode 100644
index 000000000000..d388c28eb91d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/memblock/memblock.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+title: Memblock reserved memory
+
+maintainers:
+  - Mike Rapoport <rppt@kernel.org>
+
+description: |
+  Memblock can serialize its current memory reservations created with
+  reserve_mem command line option across kexec through KHO.
+  The post-KHO kernel can then consume these reservations and they are
+  guaranteed to have the same physical address.
+
+properties:
+  compatible:
+    enum:
+      - reserve-mem-v1
+
+patternProperties:
+  "$[0-9a-f_]+^":
+    $ref: reserve-mem.yaml#
+    description: reserved memory regions
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    memblock {
+      compatible = "memblock-v1";
+      n1 {
+        compatible = "reserve-mem-v1";
+        start = <0xc06b 0x4000000>;
+        size = <0x04 0x00>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/bindings/memblock/reserve-mem.yaml linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/memblock/reserve-mem.yaml
new file mode 100644
index 000000000000..10282d3d1bcd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/memblock/reserve-mem.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+title: Memblock reserved memory regions
+
+maintainers:
+  - Mike Rapoport <rppt@kernel.org>
+
+description: |
+  Memblock can serialize its current memory reservations created with
+  reserve_mem command line option across kexec through KHO.
+  This object describes each such region.
+
+properties:
+  compatible:
+    enum:
+      - reserve-mem-v1
+
+  start:
+    description: |
+      physical address (u64) of the reserved memory region.
+
+  size:
+    description: |
+      size (u64) of the reserved memory region.
+
+required:
+  - compatible
+  - start
+  - size
+
+additionalProperties: false
+
+examples:
+  - |
+    n1 {
+      compatible = "reserve-mem-v1";
+      start = <0xc06b 0x4000000>;
+      size = <0x04 0x00>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/bindings/sub-fdt.yaml linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/sub-fdt.yaml
new file mode 100644
index 000000000000..b9a3d2d24850
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/bindings/sub-fdt.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+title: KHO users' FDT address
+
+maintainers:
+  - Mike Rapoport <rppt@kernel.org>
+  - Changyuan Lyu <changyuanl@google.com>
+
+description: |
+  Physical address of an FDT blob registered by a KHO user.
+
+properties:
+  fdt:
+    description: |
+      physical address (u64) of an FDT blob.
+
+required:
+  - fdt
+
+additionalProperties: false
+
+examples:
+  - |
+    memblock {
+            fdt = <0x80cc16 0x1000000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/concepts.rst linux-libre-6.16-gnu/Documentation/core-api/kho/concepts.rst
new file mode 100644
index 000000000000..36d5c05cfb30
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/concepts.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+.. _kho-concepts:
+
+=======================
+Kexec Handover Concepts
+=======================
+
+Kexec HandOver (KHO) is a mechanism that allows Linux to preserve memory
+regions, which could contain serialized system states, across kexec.
+
+It introduces multiple concepts:
+
+KHO FDT
+=======
+
+Every KHO kexec carries a KHO specific flattened device tree (FDT) blob
+that describes preserved memory regions. These regions contain either
+serialized subsystem states, or in-memory data that shall not be touched
+across kexec. After KHO, subsystems can retrieve and restore preserved
+memory regions from KHO FDT.
+
+KHO only uses the FDT container format and libfdt library, but does not
+adhere to the same property semantics that normal device trees do: Properties
+are passed in native endianness and standardized properties like ``regs`` and
+``ranges`` do not exist, hence there are no ``#...-cells`` properties.
+
+KHO is still under development. The FDT schema is unstable and would change
+in the future.
+
+Scratch Regions
+===============
+
+To boot into kexec, we need to have a physically contiguous memory range that
+contains no handed over memory. Kexec then places the target kernel and initrd
+into that region. The new kernel exclusively uses this region for memory
+allocations before during boot up to the initialization of the page allocator.
+
+We guarantee that we always have such regions through the scratch regions: On
+first boot KHO allocates several physically contiguous memory regions. Since
+after kexec these regions will be used by early memory allocations, there is a
+scratch region per NUMA node plus a scratch region to satisfy allocations
+requests that do not require particular NUMA node assignment.
+By default, size of the scratch region is calculated based on amount of memory
+allocated during boot. The ``kho_scratch`` kernel command line option may be
+used to explicitly define size of the scratch regions.
+The scratch regions are declared as CMA when page allocator is initialized so
+that their memory can be used during system lifetime. CMA gives us the
+guarantee that no handover pages land in that region, because handover pages
+must be at a static physical memory location and CMA enforces that only
+movable pages can be located inside.
+
+After KHO kexec, we ignore the ``kho_scratch`` kernel command line option and
+instead reuse the exact same region that was originally allocated. This allows
+us to recursively execute any amount of KHO kexecs. Because we used this region
+for boot memory allocations and as target memory for kexec blobs, some parts
+of that memory region may be reserved. These reservations are irrelevant for
+the next KHO, because kexec can overwrite even the original kernel.
+
+.. _kho-finalization-phase:
+
+KHO finalization phase
+======================
+
+To enable user space based kexec file loader, the kernel needs to be able to
+provide the FDT that describes the current kernel's state before
+performing the actual kexec. The process of generating that FDT is
+called serialization. When the FDT is generated, some properties
+of the system may become immutable because they are already written down
+in the FDT. That state is called the KHO finalization phase.
+
+Public API
+==========
+.. kernel-doc:: kernel/kexec_handover.c
+   :export:
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/fdt.rst linux-libre-6.16-gnu/Documentation/core-api/kho/fdt.rst
new file mode 100644
index 000000000000..62505285d60d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/fdt.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+=======
+KHO FDT
+=======
+
+KHO uses the flattened device tree (FDT) container format and libfdt
+library to create and parse the data that is passed between the
+kernels. The properties in KHO FDT are stored in native format.
+It includes the physical address of an in-memory structure describing
+all preserved memory regions, as well as physical addresses of KHO users'
+own FDTs. Interpreting those sub FDTs is the responsibility of KHO users.
+
+KHO nodes and properties
+========================
+
+Property ``preserved-memory-map``
+---------------------------------
+
+KHO saves a special property named ``preserved-memory-map`` under the root node.
+This node contains the physical address of an in-memory structure for KHO to
+preserve memory regions across kexec.
+
+Property ``compatible``
+-----------------------
+
+The ``compatible`` property determines compatibility between the kernel
+that created the KHO FDT and the kernel that attempts to load it.
+If the kernel that loads the KHO FDT is not compatible with it, the entire
+KHO process will be bypassed.
+
+Property ``fdt``
+----------------
+
+Generally, a KHO user serialize its state into its own FDT and instructs
+KHO to preserve the underlying memory, such that after kexec, the new kernel
+can recover its state from the preserved FDT.
+
+A KHO user thus can create a node in KHO root tree and save the physical address
+of its own FDT in that node's property ``fdt`` .
+
+Examples
+========
+
+The following example demonstrates KHO FDT that preserves two memory
+regions created with ``reserve_mem`` kernel command line parameter::
+
+  /dts-v1/;
+
+  / {
+  	compatible = "kho-v1";
+
+	preserved-memory-map = <0x40be16 0x1000000>;
+
+  	memblock {
+		fdt = <0x1517 0x1000000>;
+  	};
+  };
+
+where the ``memblock`` node contains an FDT that is requested by the
+subsystem memblock for preservation. The FDT contains the following
+serialized data::
+
+  /dts-v1/;
+
+  / {
+  	compatible = "memblock-v1";
+
+  	n1 {
+  		compatible = "reserve-mem-v1";
+  		start = <0xc06b 0x4000000>;
+  		size = <0x04 0x00>;
+  	};
+
+  	n2 {
+  		compatible = "reserve-mem-v1";
+  		start = <0xc067 0x4000000>;
+  		size = <0x04 0x00>;
+  	};
+  };
diff --git linux-libre-6.15-gnu/Documentation/core-api/kho/index.rst linux-libre-6.16-gnu/Documentation/core-api/kho/index.rst
new file mode 100644
index 000000000000..0c63b0c5c143
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/core-api/kho/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+========================
+Kexec Handover Subsystem
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   concepts
+   fdt
+
+.. only::  subproject and html
diff --git linux-libre-6.15-gnu/Documentation/core-api/printk-formats.rst linux-libre-6.16-gnu/Documentation/core-api/printk-formats.rst
index 4bdc394e86af..4b7f3646ec6c 100644
--- linux-libre-6.15-gnu/Documentation/core-api/printk-formats.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/printk-formats.rst
@@ -571,9 +571,8 @@ struct clk
 ::
 
 	%pC	pll1
-	%pCn	pll1
 
-For printing struct clk structures. %pC and %pCn print the name of the clock
+For printing struct clk structures. %pC prints the name of the clock
 (Common Clock Framework) or a unique 32-bit ID (legacy clock framework).
 
 Passed by reference.
@@ -648,6 +647,38 @@ Examples::
 	%p4cc	Y10  little-endian (0x20303159)
 	%p4cc	NV12 big-endian (0xb231564e)
 
+Generic FourCC code
+-------------------
+
+::
+	%p4c[h[R]lb]	gP00 (0x67503030)
+
+Print a generic FourCC code, as both ASCII characters and its numerical
+value as hexadecimal.
+
+The generic FourCC code is always printed in the big-endian format,
+the most significant byte first. This is the opposite of V4L/DRM FourCCs.
+
+The additional ``h``, ``hR``, ``l``, and ``b`` specifiers define what
+endianness is used to load the stored bytes. The data might be interpreted
+using the host, reversed host byte order, little-endian, or big-endian.
+
+Passed by reference.
+
+Examples for a little-endian machine, given &(u32)0x67503030::
+
+	%p4ch	gP00 (0x67503030)
+	%p4chR	00Pg (0x30305067)
+	%p4cl	gP00 (0x67503030)
+	%p4cb	00Pg (0x30305067)
+
+Examples for a big-endian machine, given &(u32)0x67503030::
+
+	%p4ch	gP00 (0x67503030)
+	%p4chR	00Pg (0x30305067)
+	%p4cl	00Pg (0x30305067)
+	%p4cb	gP00 (0x67503030)
+
 Rust
 ----
 
diff --git linux-libre-6.15-gnu/Documentation/core-api/symbol-namespaces.rst linux-libre-6.16-gnu/Documentation/core-api/symbol-namespaces.rst
index 06f766a6aab2..32fc73dc5529 100644
--- linux-libre-6.15-gnu/Documentation/core-api/symbol-namespaces.rst
+++ linux-libre-6.16-gnu/Documentation/core-api/symbol-namespaces.rst
@@ -6,18 +6,8 @@ The following document describes how to use Symbol Namespaces to structure the
 export surface of in-kernel symbols exported through the family of
 EXPORT_SYMBOL() macros.
 
-.. Table of Contents
-
-	=== 1 Introduction
-	=== 2 How to define Symbol Namespaces
-	   --- 2.1 Using the EXPORT_SYMBOL macros
-	   --- 2.2 Using the DEFAULT_SYMBOL_NAMESPACE define
-	=== 3 How to use Symbols exported in Namespaces
-	=== 4 Loading Modules that use namespaced Symbols
-	=== 5 Automatically creating MODULE_IMPORT_NS statements
-
-1. Introduction
-===============
+Introduction
+============
 
 Symbol Namespaces have been introduced as a means to structure the export
 surface of the in-kernel API. It allows subsystem maintainers to partition
@@ -28,15 +18,18 @@ kernel. As of today, modules that make use of symbols exported into namespaces,
 are required to import the namespace. Otherwise the kernel will, depending on
 its configuration, reject loading the module or warn about a missing import.
 
-2. How to define Symbol Namespaces
-==================================
+Additionally, it is possible to put symbols into a module namespace, strictly
+limiting which modules are allowed to use these symbols.
+
+How to define Symbol Namespaces
+===============================
 
 Symbols can be exported into namespace using different methods. All of them are
 changing the way EXPORT_SYMBOL and friends are instrumented to create ksymtab
 entries.
 
-2.1 Using the EXPORT_SYMBOL macros
-==================================
+Using the EXPORT_SYMBOL macros
+------------------------------
 
 In addition to the macros EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL(), that allow
 exporting of kernel symbols to the kernel symbol table, variants of these are
@@ -54,8 +47,8 @@ refer to ``NULL``. There is no default namespace if none is defined. ``modpost``
 and kernel/module/main.c make use the namespace at build time or module load
 time, respectively.
 
-2.2 Using the DEFAULT_SYMBOL_NAMESPACE define
-=============================================
+Using the DEFAULT_SYMBOL_NAMESPACE define
+-----------------------------------------
 
 Defining namespaces for all symbols of a subsystem can be very verbose and may
 become hard to maintain. Therefore a default define (DEFAULT_SYMBOL_NAMESPACE)
@@ -83,8 +76,24 @@ unit as preprocessor statement. The above example would then read::
 within the corresponding compilation unit before the #include for
 <linux/export.h>. Typically it's placed before the first #include statement.
 
-3. How to use Symbols exported in Namespaces
-============================================
+Using the EXPORT_SYMBOL_GPL_FOR_MODULES() macro
+-----------------------------------------------
+
+Symbols exported using this macro are put into a module namespace. This
+namespace cannot be imported.
+
+The macro takes a comma separated list of module names, allowing only those
+modules to access this symbol. Simple tail-globs are supported.
+
+For example::
+
+  EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm,kvm-*")
+
+will limit usage of this symbol to modules whoes name matches the given
+patterns.
+
+How to use Symbols exported in Namespaces
+=========================================
 
 In order to use symbols that are exported into namespaces, kernel modules need
 to explicitly import these namespaces. Otherwise the kernel might reject to
@@ -106,11 +115,10 @@ inspected with modinfo::
 
 
 It is advisable to add the MODULE_IMPORT_NS() statement close to other module
-metadata definitions like MODULE_AUTHOR() or MODULE_LICENSE(). Refer to section
-5. for a way to create missing import statements automatically.
+metadata definitions like MODULE_AUTHOR() or MODULE_LICENSE().
 
-4. Loading Modules that use namespaced Symbols
-==============================================
+Loading Modules that use namespaced Symbols
+===========================================
 
 At module loading time (e.g. ``insmod``), the kernel will check each symbol
 referenced from the module for its availability and whether the namespace it
@@ -121,8 +129,8 @@ allow loading of modules that don't satisfy this precondition, a configuration
 option is available: Setting MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y will
 enable loading regardless, but will emit a warning.
 
-5. Automatically creating MODULE_IMPORT_NS statements
-=====================================================
+Automatically creating MODULE_IMPORT_NS statements
+==================================================
 
 Missing namespaces imports can easily be detected at build time. In fact,
 modpost will emit a warning if a module uses a symbol from a namespace
@@ -154,3 +162,6 @@ in-tree modules::
 You can also run nsdeps for external module builds. A typical usage is::
 
 	$ make -C <path_to_kernel_src> M=$PWD nsdeps
+
+Note: it will happily generate an import statement for the module namespace;
+which will not work and generates build and runtime failures.
diff --git linux-libre-6.15-gnu/Documentation/dev-tools/kunit/run_wrapper.rst linux-libre-6.16-gnu/Documentation/dev-tools/kunit/run_wrapper.rst
index 19ddf5e07013..6697c71ee8ca 100644
--- linux-libre-6.15-gnu/Documentation/dev-tools/kunit/run_wrapper.rst
+++ linux-libre-6.16-gnu/Documentation/dev-tools/kunit/run_wrapper.rst
@@ -182,6 +182,8 @@ via UML. To run tests on qemu, by default it requires two flags:
   is ignored), the tests will run via UML. Non-UML architectures,
   for example: i386, x86_64, arm and so on; run on qemu.
 
+  ``--arch help`` lists all valid ``--arch`` values.
+
 - ``--cross_compile``: Specifies the Kbuild toolchain. It passes the
   same argument as passed to the ``CROSS_COMPILE`` variable used by
   Kbuild. As a reminder, this will be the prefix for the toolchain
diff --git linux-libre-6.15-gnu/Documentation/dev-tools/kunit/usage.rst linux-libre-6.16-gnu/Documentation/dev-tools/kunit/usage.rst
index 22955d56b379..038f480074fd 100644
--- linux-libre-6.15-gnu/Documentation/dev-tools/kunit/usage.rst
+++ linux-libre-6.16-gnu/Documentation/dev-tools/kunit/usage.rst
@@ -670,28 +670,50 @@ with ``kunit_remove_action``.
 Testing Static Functions
 ------------------------
 
-If we do not want to expose functions or variables for testing, one option is to
-conditionally export the used symbol. For example:
+If you want to test static functions without exposing those functions outside of
+testing, one option is conditionally export the symbol. When KUnit is enabled,
+the symbol is exposed but remains static otherwise. To use this method, follow
+the template below.
 
 .. code-block:: c
 
-	/* In my_file.c */
+	/* In the file containing functions to test "my_file.c" */
 
-	VISIBLE_IF_KUNIT int do_interesting_thing();
+	#include <kunit/visibility.h>
+	#include <my_file.h>
+	...
+	VISIBLE_IF_KUNIT int do_interesting_thing()
+	{
+	...
+	}
 	EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
 
-	/* In my_file.h */
+	/* In the header file "my_file.h" */
 
 	#if IS_ENABLED(CONFIG_KUNIT)
 		int do_interesting_thing(void);
 	#endif
 
-Alternatively, you could conditionally ``#include`` the test file at the end of
-your .c file. For example:
+	/* In the KUnit test file "my_file_test.c" */
+
+	#include <kunit/visibility.h>
+	#include <my_file.h>
+	...
+	MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);
+	...
+	// Use do_interesting_thing() in tests
+
+For a full example, see this `patch <https://lore.kernel.org/all/20221207014024.340230-3-rmoar@google.com/>`_
+where a test is modified to conditionally expose static functions for testing
+using the macros above.
+
+As an **alternative** to the method above, you could conditionally ``#include``
+the test file at the end of your .c file. This is not recommended but works
+if needed. For example:
 
 .. code-block:: c
 
-	/* In my_file.c */
+	/* In "my_file.c" */
 
 	static int do_interesting_thing();
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/altera.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/altera.yaml
index 8c7575455422..30c44a0e6407 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/altera.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/altera.yaml
@@ -47,6 +47,7 @@ properties:
               - novtech,chameleon96
               - samtec,vining
               - terasic,de0-atlas
+              - terasic,de10-nano
               - terasic,socfpga-cyclone5-sockit
           - const: altr,socfpga-cyclone5
           - const: altr,socfpga
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index 572381306681..a758f4bb2bb3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -9,20 +9,120 @@ title: Altera SOCFPGA Clock Manager
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
 
-description: test
+description:
+  This binding describes the Altera SOCFGPA Clock Manager and its associated
+  tree of clocks, pll's, and clock gates for the Cyclone5, Arria5 and Arria10
+  chip families.
 
 properties:
   compatible:
     items:
       - const: altr,clk-mgr
+
   reg:
     maxItems: 1
 
+  clocks:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^osc[0-9]$":
+        type: object
+
+      "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
+        type: object
+        $ref: '#/$defs/clock-props'
+        unevaluatedProperties: false
+
+        properties:
+          compatible:
+            enum:
+              - altr,socfpga-pll-clock
+              - altr,socfpga-perip-clk
+              - altr,socfpga-gate-clk
+              - altr,socfpga-a10-pll-clock
+              - altr,socfpga-a10-perip-clk
+              - altr,socfpga-a10-gate-clk
+              - fixed-clock
+
+          clocks:
+            description: one or more phandles to input clock
+            minItems: 1
+            maxItems: 5
+
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
+            type: object
+            $ref: '#/$defs/clock-props'
+            unevaluatedProperties: false
+
+            properties:
+              compatible:
+                enum:
+                  - altr,socfpga-perip-clk
+                  - altr,socfpga-gate-clk
+                  - altr,socfpga-a10-perip-clk
+                  - altr,socfpga-a10-gate-clk
+
+              clocks:
+                description: one or more phandles to input clock
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - compatible
+              - clocks
+              - "#clock-cells"
+
+        required:
+          - compatible
+          - "#clock-cells"
+
 required:
   - compatible
+  - reg
 
 additionalProperties: false
 
+$defs:
+  clock-props:
+    properties:
+      reg:
+        maxItems: 1
+
+      "#clock-cells":
+        const: 0
+
+      clk-gate:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: gating register offset
+          - description: bit index
+
+      div-reg:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: divider register offset
+          - description: bit shift
+          - description: bit width
+
+      fixed-divider:
+        $ref: /schemas/types.yaml#/definitions/uint32
+
 examples:
   - |
     clkmgr@ffd04000 {
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
index 0647851ae1f5..05edf22e6c30 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -27,6 +27,7 @@ properties:
         items:
           - enum:
               - minix,neo-x8
+              - tcu,fernsehfee3
           - const: amlogic,meson8
 
       - description: Boards with the Amlogic Meson8m2 SoC
@@ -73,6 +74,13 @@ properties:
           - const: amlogic,s805x
           - const: amlogic,meson-gxl
 
+      - description: Boards with the Amlogic Meson GXL S805Y SoC
+        items:
+          - enum:
+              - xiaomi,aquaman
+          - const: amlogic,s805y
+          - const: amlogic,meson-gxl
+
       - description: Boards with the Amlogic Meson GXL S905W SoC
         items:
           - enum:
@@ -237,6 +245,24 @@ properties:
               - amlogic,aq222
           - const: amlogic,s4
 
+      - description: Boards with the Amlogic S6 S905X5 SoC
+        items:
+          - enum:
+              - amlogic,bl209
+          - const: amlogic,s6
+
+      - description: Boards with the Amlogic S7 S805X3 SoC
+        items:
+          - enum:
+              - amlogic,bp201
+          - const: amlogic,s7
+
+      - description: Boards with the Amlogic S7D S905X5M SoC
+        items:
+          - enum:
+              - amlogic,bm202
+          - const: amlogic,s7d
+
       - description: Boards with the Amlogic T7 A311D2 SoC
         items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
index a6f793ea03b6..0c1017affbad 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -30,6 +30,19 @@ properties:
   power-domains:
     maxItems: 1
 
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - enum: [apb_pclk, atclk]
+      - items: # Zynq-700
+          - const: apb_pclk
+          - const: dbg_trc
+          - const: dbg_apb
+
   in-ports:
     $ref: /schemas/graph.yaml#/properties/ports
     additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml
new file mode 100644
index 000000000000..ad4a98a4ee67
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/atmel,sama5d2-secumod.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 Security Module (SECUMOD)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description:
+  The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+  Note that they maintain their voltage during Backup/Self-refresh.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-secumod
+          - const: syscon
+      - items:
+          - enum:
+              - microchip,sama7d65-secumod
+              - microchip,sama7g5-secumod
+          - const: atmel,sama5d2-secumod
+          - const: syscon
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    security-module@fc040000 {
+      compatible = "atmel,sama5d2-secumod", "syscon";
+      reg = <0xfc040000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/atmel-sysregs.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index d3821f651e72..5ce54f9befe6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -46,28 +46,3 @@ Examples:
 		reg = <0xffffe800 0x200>;
 	};
 
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled.
-
-The Security Module also offers the PIOBU pins which can be used as GPIO pins.
-Note that they maintain their voltage during Backup/Self-refresh.
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
-  <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-- gpio-controller:	Marks the port as GPIO controller.
-- #gpio-cells:		There are 2. The pin number is the
-			first, the second represents additional
-			parameters such as GPIO_ACTIVE_HIGH/LOW.
-
-
-	secumod@fc040000 {
-		compatible = "atmel,sama5d2-secumod", "syscon";
-		reg = <0xfc040000 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index e4ff71f006b8..2729a542c4f3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -52,6 +52,7 @@ properties:
       - description: BCM2837 based Boards
         items:
           - enum:
+              - raspberrypi,2-model-b-rev2
               - raspberrypi,3-model-a-plus
               - raspberrypi,3-model-b
               - raspberrypi,3-model-b-plus
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/cpus.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
index 2e666b2a4dcd..2e9ab9583005 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -10,9 +10,9 @@ maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 
 description: |+
-  The device tree allows to describe the layout of CPUs in a system through
-  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-  defining properties for every cpu.
+  The device tree allows to describe the layout of CPUs in a system through the
+  "cpus" node, which in turn contains a number of subnodes (ie "cpu") defining
+  properties for every cpu.
 
   Bindings for CPU nodes follow the Devicetree Specification, available from:
 
@@ -41,45 +41,40 @@ description: |+
 properties:
   reg:
     maxItems: 1
-    description: |
-      Usage and definition depend on ARM architecture version and
-      configuration:
+    description: >
+      Usage and definition depend on ARM architecture version and configuration:
 
-      On uniprocessor ARM architectures previous to v7
-      this property is required and must be set to 0.
+      On uniprocessor ARM architectures previous to v7 this property is required
+      and must be set to 0.
 
-      On ARM 11 MPcore based systems this property is
-        required and matches the CPUID[11:0] register bits.
+      On ARM 11 MPcore based systems this property is required and matches the
+      CPUID[11:0] register bits.
 
-        Bits [11:0] in the reg cell must be set to
-        bits [11:0] in CPU ID register.
+        Bits [11:0] in the reg cell must be set to bits [11:0] in CPU ID register.
 
         All other bits in the reg cell must be set to 0.
 
-      On 32-bit ARM v7 or later systems this property is
-        required and matches the CPU MPIDR[23:0] register
-        bits.
+      On 32-bit ARM v7 or later systems this property is required and matches
+      the CPU MPIDR[23:0] register bits.
 
-        Bits [23:0] in the reg cell must be set to
-        bits [23:0] in MPIDR.
+        Bits [23:0] in the reg cell must be set to bits [23:0] in MPIDR.
 
         All other bits in the reg cell must be set to 0.
 
-      On ARM v8 64-bit systems this property is required
-        and matches the MPIDR_EL1 register affinity bits.
+      On ARM v8 64-bit systems this property is required and matches the
+      MPIDR_EL1 register affinity bits.
 
         * If cpus node's #address-cells property is set to 2
 
-          The first reg cell bits [7:0] must be set to
-          bits [39:32] of MPIDR_EL1.
+          The first reg cell bits [7:0] must be set to bits [39:32] of
+          MPIDR_EL1.
 
-          The second reg cell bits [23:0] must be set to
-          bits [23:0] of MPIDR_EL1.
+          The second reg cell bits [23:0] must be set to bits [23:0] of
+          MPIDR_EL1.
 
         * If cpus node's #address-cells property is set to 1
 
-          The reg cell bits [23:0] must be set to bits [23:0]
-          of MPIDR_EL1.
+          The reg cell bits [23:0] must be set to bits [23:0] of MPIDR_EL1.
 
       All other bits in the reg cells must be set to 0.
 
@@ -273,103 +268,122 @@ properties:
     description:
       The DT specification defines this as 64-bit always, but some 32-bit Arm
       systems have used a 32-bit value which must be supported.
-      Required for systems that have an "enable-method"
-        property value of "spin-table".
 
   cpu-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
-    description: |
-      List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.yaml).
+    description:
+      List of phandles to idle state nodes supported by this cpu (see
+      ./idle-states.yaml).
 
   capacity-dmips-mhz:
     description:
       u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
-      DMIPS/MHz, relative to highest capacity-dmips-mhz
-      in the system.
+      DMIPS/MHz, relative to highest capacity-dmips-mhz in the system.
 
   cci-control-port: true
 
   dynamic-power-coefficient:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      A u32 value that represents the running time dynamic
-      power coefficient in units of uW/MHz/V^2. The
-      coefficient can either be calculated from power
+    description: >
+      A u32 value that represents the running time dynamic power coefficient in
+      units of uW/MHz/V^2. The coefficient can either be calculated from power
       measurements or derived by analysis.
 
-      The dynamic power consumption of the CPU  is
-      proportional to the square of the Voltage (V) and
-      the clock frequency (f). The coefficient is used to
+      The dynamic power consumption of the CPU  is proportional to the square of
+      the Voltage (V) and the clock frequency (f). The coefficient is used to
       calculate the dynamic power as below -
 
       Pdyn = dynamic-power-coefficient * V^2 * f
 
       where voltage is in V, frequency is in MHz.
 
+  interconnects:
+    minItems: 1
+    maxItems: 3
+
+  nvmem-cells:
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: speed_grade
+
   performance-domains:
     maxItems: 1
-    description:
-      List of phandles and performance domain specifiers, as defined by
-      bindings of the performance domain provider. See also
-      dvfs/performance-domain.yaml.
 
   power-domains:
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider (see also ../power_domain.txt).
+    minItems: 1
+    maxItems: 2
 
   power-domain-names:
     description:
-      A list of power domain name strings sorted in the same order as the
-      power-domains property.
-
       For PSCI based platforms, the name corresponding to the index of the PSCI
       PM domain provider, must be "psci". For SCMI based platforms, the name
       corresponding to the index of an SCMI performance domain provider, must be
       "perf".
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ psci, perf, cpr ]
 
-  qcom,saw:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
-      Specifies the SAW* node associated with this CPU.
+  resets:
+    maxItems: 1
 
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+  arm-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
 
-      * arm/msm/qcom,saw2.txt
+  cpu0-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
 
-  qcom,acc:
+  mem-supply: true
+
+  proc-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
+
+  sram-supply:
+    deprecated: true
+    description: Use 'mem-supply' instead
+
+  mediatek,cci:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
-      Specifies the ACC* node associated with this CPU.
+    description: Link to Mediatek Cache Coherent Interconnect
 
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
-      "qcom,msm8916-smp".
+  qcom,saw:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the SAW node associated with this CPU.
 
-      * arm/msm/qcom,kpss-acc.txt
+  qcom,acc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the ACC node associated with this CPU.
+
+  qcom,freq-domain:
+    description: Specifies the QCom CPUFREQ HW associated with the CPU.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
 
   rockchip,pmu:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
+    description: >
       Specifies the syscon node controlling the cpu core power domains.
 
-      Optional for systems that have an "enable-method"
-      property value of "rockchip,rk3066-smp"
-      While optional, it is the preferred way to get access to
-      the cpu-core power-domains.
+      Optional for systems that have an "enable-method" property value of
+      "rockchip,rk3066-smp". While optional, it is the preferred way to get
+      access to the cpu-core power-domains.
 
   secondary-boot-reg:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description: >
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
 
-      This includes the following SoCs: |
-      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      This includes the following SoCs:
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550,
       BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
 
       The secondary-boot-reg property is a u32 value that specifies the
@@ -378,22 +392,66 @@ properties:
       formed by encoding the target CPU id into the low bits of the
       physical start address it should jump to.
 
-if:
-  # If the enable-method property contains one of those values
-  properties:
-    enable-method:
-      contains:
-        enum:
-          - brcm,bcm11351-cpu-method
-          - brcm,bcm23550
-          - brcm,bcm-nsp-smp
-  # and if enable-method is present
-  required:
-    - enable-method
-
-then:
-  required:
-    - secondary-boot-reg
+  thermal-idle:
+    type: object
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+  - $ref: /schemas/opp/opp-v1.yaml#
+  - if:
+      # If the enable-method property contains one of those values
+      properties:
+        enable-method:
+          contains:
+            enum:
+              - brcm,bcm11351-cpu-method
+              - brcm,bcm23550
+              - brcm,bcm-nsp-smp
+      # and if enable-method is present
+      required:
+        - enable-method
+    then:
+      required:
+        - secondary-boot-reg
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - spin-table
+            - renesas,r9a06g032-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - cpu-release-addr
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - qcom,kpss-acc-v1
+            - qcom,kpss-acc-v2
+            - qcom,msm8226-smp
+            - qcom,msm8916-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - qcom,acc
+        - qcom,saw
+    else:
+      if:
+        # 2 Qualcomm platforms bootloaders need qcom,acc and qcom,saw yet use
+        # "spin-table" or "psci" enable-methods. Disallowing the properties for
+        # all other CPUs is the best we can do as there's not any way to
+        # distinguish these Qualcomm platforms.
+        not:
+          properties:
+            compatible:
+              const: arm,cortex-a53
+      then:
+        properties:
+          qcom,acc: false
+          qcom,saw: false
 
 required:
   - device_type
@@ -403,7 +461,7 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml
new file mode 100644
index 000000000000..1f515bea3959
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx51-m4if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Multi Master Multi Memory Interface (M4IF) and Tigerp module
+
+description: collect the imx devices, which only have compatible and reg property
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx51-m4if
+          - fsl,imx51-tigerp
+          - fsl,imx51-aipstz
+          - fsl,imx53-aipstz
+          - fsl,imx7d-pcie-phy
+      - items:
+          - const: fsl,imx53-tigerp
+          - const: fsl,imx51-tigerp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    m4if@83fd8000 {
+        compatible = "fsl,imx51-m4if";
+        reg = <0x83fd8000 0x1000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/freescale/m4if.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/freescale/m4if.txt
deleted file mode 100644
index 93bd7b867a53..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/freescale/m4if.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale Multi Master Multi Memory Interface (M4IF) module
-
-Required properties:
-- compatible : Should be "fsl,imx51-m4if"
-- reg : Address and length of the register set for the device
-
-Example:
-
-m4if: m4if@83fd8000 {
-	compatible = "fsl,imx51-m4if";
-	reg = <0x83fd8000 0x1000>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/freescale/tigerp.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
deleted file mode 100644
index 19e2aad63d6e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale Tigerp platform module
-
-Required properties:
-- compatible : Should be "fsl,imx51-tigerp"
-- reg : Address and length of the register set for the device
-
-Example:
-
-tigerp: tigerp@83fa0000 {
-	compatible = "fsl,imx51-tigerp";
-	reg = <0x83fa0000 0x28>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/fsl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
index 1b90870958a2..d3b5e6923e41 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1120,6 +1120,12 @@ properties:
           - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
           - const: fsl,imx8mp
 
+      - description: Boundary Devices Nitrogen8M Plus ENC Carrier Board
+        items:
+          - const: boundary,imx8mp-nitrogen-enc-carrier-board
+          - const: boundary,imx8mp-nitrogen-som
+          - const: fsl,imx8mp
+
       - description: Boundary Device Nitrogen8MP Universal SMARC Carrier Board
         items:
           - const: boundary,imx8mp-nitrogen-smarc-universal-board
@@ -1156,6 +1162,13 @@ properties:
           - const: kontron,imx8mp-osm-s               # Kontron i.MX8MP OSM-S SoM
           - const: fsl,imx8mp
 
+      - description: PHYTEC phyCORE-i.MX8MP FPSC based boards
+        items:
+          - enum:
+              - phytec,imx8mp-libra-rdk-fpsc  # i.MX 8M Plus Libra RDK
+          - const: phytec,imx8mp-phycore-fpsc # phyCORE-i.MX 8M Plus FPSC
+          - const: fsl,imx8mp
+
       - description: PHYTEC phyCORE-i.MX8MP SoM based boards
         items:
           - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK
@@ -1176,6 +1189,12 @@ properties:
           - const: polyhex,imx8mp-debix-som-a       # Polyhex Debix SOM A
           - const: fsl,imx8mp
 
+      - description: Toradex Boards with SMARC iMX8M Plus Modules
+        items:
+          - const: toradex,smarc-imx8mp-dev # Toradex SMARC iMX8M Plus on Toradex SMARC Development Board
+          - const: toradex,smarc-imx8mp     # Toradex SMARC iMX8M Plus Module
+          - const: fsl,imx8mp
+
       - description: Toradex Boards with Verdin iMX8M Plus Modules
         items:
           - enum:
@@ -1333,6 +1352,22 @@ properties:
               - const: tq,imx8qxp-tqma8xqp     # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP)
               - const: fsl,imx8qxp
 
+      - description:
+          TQMa8XxS is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It has the SMARC-2.0 form factor and is designed to be placed on
+          different carrier boards. MB-SMARC-2 is a carrier reference design.
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqps-mb-smarc-2 # TQ-Systems GmbH TQMa8QXPS SOM on MB-SMARC-2
+              - const: tq,imx8qxp-tqma8xqps         # TQ-Systems GmbH TQMa8QXPS SOM
+              - const: fsl,imx8qxp
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdps-mb-smarc-2 # TQ-Systems GmbH TQMa8XDPS SOM on MB-SMARC-2
+              - const: tq,imx8dxp-tqma8xdps         # TQ-Systems GmbH TQMa8XDPS SOM
+              - const: fsl,imx8dxp
+
       - description: i.MX8ULP based Boards
         items:
           - enum:
@@ -1347,6 +1382,12 @@ properties:
               - fsl,imx93-14x14-evk       # i.MX93 14x14 EVK Board
           - const: fsl,imx93
 
+      - description: i.MX94 based Boards
+        items:
+          - enum:
+              - fsl,imx943-evk            # i.MX943 EVK Board
+          - const: fsl,imx94
+
       - description: i.MX95 based Boards
         items:
           - enum:
@@ -1374,12 +1415,16 @@ properties:
           All SOM and CPU variants use the same device tree hence only one
           compatible is needed. Bootloader disables all features not present
           in the assembled SOC.
+          MBa91xxCA mainboard can be used as starterkit for the SOM
+          soldered on an adapter board or for the connector variant
+          to evaluate RGB display support.
           MBa93xxCA mainboard can be used as starterkit for the SOM
           soldered on an adapter board or for the connector variant
           MBa93xxLA mainboard is a single board computer using the solderable
           SOM variant
         items:
           - enum:
+              - tq,imx93-tqma9352-mba91xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa91xxCA
               - tq,imx93-tqma9352-mba93xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa93xxCA
               - tq,imx93-tqma9352-mba93xxla # TQ-Systems GmbH i.MX93 TQMa93xxLA SOM on MBa93xxLA SBC
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
@@ -1387,8 +1432,10 @@ properties:
 
       - description: PHYTEC phyCORE-i.MX93 SoM based boards
         items:
-          - const: phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
-          - const: phytec,imx93-phycore-som    # phyCORE-i.MX93 SoM
+          - enum:
+              - phytec,imx93-phyboard-nash  # phyBOARD-Nash-i.MX93
+              - phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
+          - const: phytec,imx93-phycore-som # phyCORE-i.MX93 SoM
           - const: fsl,imx93
 
       - description: Variscite VAR-SOM-MX93 based boards
@@ -1403,6 +1450,16 @@ properties:
           - const: kontron,imx93-osm-s    # Kontron OSM-S i.MX93 SoM
           - const: fsl,imx93
 
+      - description:
+          TQMa95xxSA is a series of SOM featuring NXP i.MX95 SoC variants.
+          It has the SMARC form factor and is designed to be placed on
+          different carrier boards. MB-SMARC-2 is a carrier reference design.
+        items:
+          - enum:
+              - tq,imx95-tqma9596sa-mb-smarc-2 # TQ-Systems GmbH i.MX95 TQMa95xxSA SOM on MB-SMARC-2
+          - const: tq,imx95-tqma9596sa         # TQ-Systems GmbH i.MX95 TQMa95xxSA SOM
+          - const: fsl,imx95
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/intel,socfpga.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
index 2ee0c740eb56..c75cd7d29f1a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -25,6 +25,7 @@ properties:
         items:
           - enum:
               - intel,socfpga-agilex5-socdk
+              - intel,socfpga-agilex5-socdk-nand
           - const: intel,socfpga-agilex5
 
 additionalProperties: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
index 108ae5e0185d..a7e0a72f6e4c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -104,6 +104,10 @@ properties:
           - enum:
               - bananapi,bpi-r4
           - const: mediatek,mt7988a
+      - items:
+          - const: bananapi,bpi-r4-2g5
+          - const: bananapi,bpi-r4
+          - const: mediatek,mt7988a
       - items:
           - enum:
               - mediatek,mt8127-moose
@@ -285,6 +289,13 @@ properties:
           - const: google,steelix-sku393218
           - const: google,steelix
           - const: mediatek,mt8186
+      - description: Google Ponyta
+        items:
+          - enum:
+              - google,ponyta-sku0
+              - google,ponyta-sku1
+          - const: google,ponyta
+          - const: mediatek,mt8186
       - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
         items:
           - const: google,steelix-sku196609
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/psci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/psci.yaml
index cbb012e217ab..7360a2849b5b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/psci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/psci.yaml
@@ -191,27 +191,27 @@ examples:
       #size-cells = <0>;
       #address-cells = <1>;
 
-      CPU0: cpu@0 {
+      cpu@0 {
         device_type = "cpu";
         compatible = "arm,cortex-a53";
         reg = <0x0>;
         enable-method = "psci";
-        power-domains = <&CPU_PD0>;
+        power-domains = <&cpu_pd0>;
         power-domain-names = "psci";
       };
 
-      CPU1: cpu@1 {
+      cpu@1 {
         device_type = "cpu";
         compatible = "arm,cortex-a53";
         reg = <0x100>;
         enable-method = "psci";
-        power-domains = <&CPU_PD1>;
+        power-domains = <&cpu_pd1>;
         power-domain-names = "psci";
       };
 
       idle-states {
 
-        CPU_PWRDN: cpu-power-down {
+        cpu_pwrdn: cpu-power-down {
           compatible = "arm,idle-state";
           arm,psci-suspend-param = <0x0000001>;
           entry-latency-us = <10>;
@@ -222,7 +222,7 @@ examples:
 
       domain-idle-states {
 
-        CLUSTER_RET: cluster-retention {
+        cluster_ret: cluster-retention {
           compatible = "domain-idle-state";
           arm,psci-suspend-param = <0x1000011>;
           entry-latency-us = <500>;
@@ -230,7 +230,7 @@ examples:
           min-residency-us = <2000>;
         };
 
-        CLUSTER_PWRDN: cluster-power-down {
+        cluster_pwrdn: cluster-power-down {
           compatible = "domain-idle-state";
           arm,psci-suspend-param = <0x1000031>;
           entry-latency-us = <2000>;
@@ -244,21 +244,21 @@ examples:
       compatible = "arm,psci-1.0";
       method = "smc";
 
-      CPU_PD0: power-domain-cpu0 {
+      cpu_pd0: power-domain-cpu0 {
         #power-domain-cells = <0>;
-        domain-idle-states = <&CPU_PWRDN>;
-        power-domains = <&CLUSTER_PD>;
+        domain-idle-states = <&cpu_pwrdn>;
+        power-domains = <&cluster_pd>;
       };
 
-      CPU_PD1: power-domain-cpu1 {
+      cpu_pd1: power-domain-cpu1 {
         #power-domain-cells = <0>;
-        domain-idle-states =  <&CPU_PWRDN>;
-        power-domains = <&CLUSTER_PD>;
+        domain-idle-states =  <&cpu_pwrdn>;
+        power-domains = <&cluster_pd>;
       };
 
-      CLUSTER_PD: power-domain-cluster {
+      cluster_pd: power-domain-cluster {
         #power-domain-cells = <0>;
-        domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+        domain-idle-states = <&cluster_ret>, <&cluster_pwrdn>;
       };
     };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
index 618a87693ac1..56f78f0f3803 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -90,6 +90,7 @@ description: |
         sm6350
         sm6375
         sm7125
+        sm7150
         sm7225
         sm7325
         sm8150
@@ -1020,6 +1021,7 @@ properties:
       - items:
           - enum:
               - sony,pdx201
+              - xiaomi,ginkgo
               - xiaomi,laurel-sprout
           - const: qcom,sm6125
 
@@ -1039,6 +1041,11 @@ properties:
               - xiaomi,joyeuse
           - const: qcom,sm7125
 
+      - items:
+          - enum:
+              - google,sunfish
+          - const: qcom,sm7150
+
       - items:
           - enum:
               - fairphone,fp4
@@ -1123,14 +1130,18 @@ properties:
 
       - items:
           - enum:
-              - lenovo,thinkpad-t14s
+              - lenovo,thinkpad-t14s-lcd
+              - lenovo,thinkpad-t14s-oled
+          - const: lenovo,thinkpad-t14s
           - const: qcom,x1e78100
           - const: qcom,x1e80100
 
       - items:
           - enum:
               - asus,vivobook-s15
+              - asus,zenbook-a14-ux3407ra
               - dell,xps13-9345
+              - hp,elitebook-ultra-g1q
               - hp,omnibook-x14
               - lenovo,yoga-slim7x
               - microsoft,romulus13
@@ -1141,6 +1152,7 @@ properties:
 
       - items:
           - enum:
+              - asus,zenbook-a14-ux3407qa
               - qcom,x1p42100-crd
           - const: qcom,x1p42100
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
index 650fb833d96e..5772d905f390 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -946,6 +946,11 @@ properties:
           - const: radxa,rock-5b
           - const: rockchip,rk3588
 
+      - description: Radxa ROCK 5B+
+        items:
+          - const: radxa,rock-5b-plus
+          - const: rockchip,rk3588
+
       - description: Radxa ROCK 5C
         items:
           - const: radxa,rock-5c
@@ -1047,6 +1052,11 @@ properties:
           - const: rockchip,rk3399-evb
           - const: rockchip,rk3399
 
+      - description: Rockchip RK3399 Industry Evaluation board
+        items:
+          - const: rockchip,rk3399-evb-ind
+          - const: rockchip,rk3399
+
       - description: Rockchip RK3399 Sapphire standalone
         items:
           - const: rockchip,rk3399-sapphire
@@ -1057,6 +1067,11 @@ properties:
           - const: rockchip,rk3399-sapphire-excavator
           - const: rockchip,rk3399
 
+      - description: Rockchip RK3562 Evaluation board 2
+        items:
+          - const: rockchip,rk3562-evb2-v10
+          - const: rockchip,rk3562
+
       - description: Rockchip RK3566 BOX Evaluation Demo board
         items:
           - const: rockchip,rk3566-box-demo
@@ -1074,7 +1089,9 @@ properties:
 
       - description: Rockchip RK3588 Evaluation board
         items:
-          - const: rockchip,rk3588-evb1-v10
+          - enum:
+              - rockchip,rk3588-evb1-v10
+              - rockchip,rk3588-evb2-v10
           - const: rockchip,rk3588
 
       - description: Rockchip RK3588S Evaluation board
@@ -1109,6 +1126,24 @@ properties:
               - rockchip,rv1126
               - rockchip,rv1109
 
+      - description: Theobroma Systems PX30-Cobra
+        items:
+          - enum:
+              - tsd,px30-cobra-ltk050h3146w
+              - tsd,px30-cobra-ltk050h3146w-a2
+              - tsd,px30-cobra-ltk050h3148w
+              - tsd,px30-cobra-ltk500hd1829
+          - const: tsd,px30-cobra
+          - const: rockchip,px30
+
+      - description: Theobroma Systems PX30-PP1516
+        items:
+          - enum:
+              - tsd,px30-pp1516-ltk050h3146w-a2
+              - tsd,px30-pp1516-ltk050h3148w
+          - const: tsd,px30-pp1516
+          - const: rockchip,px30
+
       - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
         items:
           - const: tsd,px30-ringneck-haikou
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 52016a141227..46c1af851be7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -25,6 +25,7 @@ select:
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3562-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3576-pmu
           - rockchip,rk3588-pmu
@@ -43,6 +44,7 @@ properties:
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3562-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3576-pmu
           - rockchip,rk3588-pmu
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index fab29f95d8e6..b3be184c7e56 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -212,6 +212,14 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos7870 based boards
+        items:
+          - enum:
+              - samsung,a2corelte               # Samsung Galaxy A2 Core
+              - samsung,j6lte                   # Samsung Galaxy J6
+              - samsung,on7xelte                # Samsung Galaxy J7 Prime
+          - const: samsung,exynos7870
+
       - description: Exynos7885 based boards
         items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 5fee2f38ff25..408532504a24 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -42,6 +42,10 @@ properties:
               - st,stm32h743i-disco
               - st,stm32h743i-eval
           - const: st,stm32h743
+      - items:
+          - enum:
+              - st,stm32h747i-disco
+          - const: st,stm32h747
       - items:
           - enum:
               - st,stm32h750i-art-pi
@@ -184,6 +188,11 @@ properties:
           - const: phytec,phycore-stm32mp157c-som
           - const: st,stm32mp157
 
+      - description: Ultratronik STM32MP1 SBC based Boards
+        items:
+          - const: ultratronik,stm32mp157c-ultra-fly-sbc
+          - const: st,stm32mp157
+
       - description: ST STM32MP257 based Boards
         items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
index f536cdd2c1a6..7807ea613258 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -492,6 +492,11 @@ properties:
           - const: lamobo,lamobo-r1
           - const: allwinner,sun7i-a20
 
+      - description: Liontron H-A133L
+        items:
+          - const: liontron,h-a133l
+          - const: allwinner,sun50i-a100
+
       - description: HAOYU Electronics Marsboard A10
         items:
           - const: haoyu,a10-marsboard
@@ -845,6 +850,11 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: Radxa Cubie A5E
+        items:
+          - const: radxa,cubie-a5e
+          - const: allwinner,sun55i-a527
+
       - description: Remix Mini PC
         items:
           - const: jide,remix-mini-pc
@@ -966,6 +976,11 @@ properties:
           - const: hechuang,x96-mate
           - const: allwinner,sun50i-h616
 
+      - description: X96Q Pro+
+        items:
+          - const: amediatech,x96q-pro-plus
+          - const: allwinner,sun55i-h728
+
       - description: Xunlong OrangePi
         items:
           - const: xunlong,orangepi
@@ -1081,4 +1096,14 @@ properties:
           - const: xunlong,orangepi-zero3
           - const: allwinner,sun50i-h618
 
+      - description: YuzukiHD Avaota A1
+        items:
+          - const: yuzukihd,avaota-a1
+          - const: allwinner,sun55i-t527
+
+      - description: YuzukiHD Chameleon
+        items:
+          - const: yuzukihd,chameleon
+          - const: allwinner,sun50i-h618
+
 additionalProperties: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
index 65e0ff1fdf1e..9cae3268a827 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -52,17 +52,14 @@ properties:
               - nvidia,cardhu-a04
           - const: nvidia,cardhu
           - const: nvidia,tegra30
-      - items:
-          - const: asus,tf201
-          - const: nvidia,tegra30
-      - items:
-          - const: asus,tf300t
-          - const: nvidia,tegra30
-      - items:
-          - const: asus,tf300tg
-          - const: nvidia,tegra30
-      - items:
-          - const: asus,tf700t
+      - description: ASUS Transformers Device family
+        items:
+          - enum:
+              - asus,tf201
+              - asus,tf300t
+              - asus,tf300tg
+              - asus,tf300tl
+              - asus,tf700t
           - const: nvidia,tegra30
       - description: LG Optimus 4X P880
         items:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
index 18f155cd06c8..bf6003d8fb76 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -46,6 +46,7 @@ properties:
       - description: K3 AM625 SoC
         items:
           - enum:
+              - beagle,am62-pocketbeagle2
               - beagle,am625-beagleplay
               - ti,am625-sk
               - ti,am62-lp-sk
@@ -75,6 +76,30 @@ properties:
           - const: toradex,verdin-am62          # Verdin AM62 Module
           - const: ti,am625
 
+      - description: K3 AM62P5 SoC Toradex Verdin Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,verdin-am62p-nonwifi-dahlia # Verdin AM62P Module on Dahlia
+              - toradex,verdin-am62p-nonwifi-dev    # Verdin AM62P Module on Verdin Development Board
+              - toradex,verdin-am62p-nonwifi-ivy    # Verdin AM62P Module on Ivy
+              - toradex,verdin-am62p-nonwifi-mallow # Verdin AM62P Module on Mallow
+              - toradex,verdin-am62p-nonwifi-yavia  # Verdin AM62P Module on Yavia
+          - const: toradex,verdin-am62p-nonwifi     # Verdin AM62P Module without Wi-Fi / BT
+          - const: toradex,verdin-am62p             # Verdin AM62P Module
+          - const: ti,am62p5
+
+      - description: K3 AM62P5 SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+        items:
+          - enum:
+              - toradex,verdin-am62p-wifi-dahlia # Verdin AM62P Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-am62p-wifi-dev    # Verdin AM62P Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62p-wifi-ivy    # Verdin AM62P Wi-Fi / BT Module on Ivy
+              - toradex,verdin-am62p-wifi-mallow # Verdin AM62P Wi-Fi / BT Module on Mallow
+              - toradex,verdin-am62p-wifi-yavia  # Verdin AM62P Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-am62p-wifi     # Verdin AM62P Wi-Fi / BT Module
+          - const: toradex,verdin-am62p          # Verdin AM62P Module
+          - const: ti,am62p5
+
       - description: K3 AM642 SoC
         items:
           - enum:
@@ -139,6 +164,13 @@ properties:
               - ti,j721s2-evm
           - const: ti,j721s2
 
+      - description: K3 J721s2 SoC Phytec SoM based boards
+        items:
+          - enum:
+              - phytec,am68-phyboard-izar
+          - const: phytec,am68-phycore-som
+          - const: ti,j721s2
+
       - description: K3 J722S SoC and Boards
         items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
index 5d5ad5a60451..fa47b8989bbf 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -7,14 +7,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: VIA/Wondermedia VT8500 Platforms
 
 maintainers:
-  - Tony Prisk <linux@prisktech.co.nz>
-description: test
+  - Alexey Charkov <alchark@gmail.com>
 
 properties:
   $nodename:
     const: '/'
   compatible:
-    items:
+    oneOf:
       - enum:
           - via,vt8500
           - wm,wm8505
@@ -22,4 +21,9 @@ properties:
           - wm,wm8750
           - wm,wm8850
 
+      - description: VIA APC Rock and Paper boards
+        items:
+          - const: via,apc-rock
+          - const: wm,wm8950
+
 additionalProperties: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/ahci-dm816.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/ahci-dm816.txt
deleted file mode 100644
index f8c535f3541f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/ahci-dm816.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device tree binding for the TI DM816 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,dm816-ahci"
-  - reg: physical base address and size of the register region used by
-         the controller (as defined by the AHCI 1.1 standard)
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-  - clocks: list of phandle and clock specifier pairs (or only
-            phandles for clock providers with '0' defined for
-            #clock-cells); two clocks must be specified: the functional
-            clock and an external reference clock
-
-Example:
-
-	sata: sata@4a140000 {
-		compatible = "ti,dm816-ahci";
-		reg = <0x4a140000 0x10000>;
-		interrupts = <16>;
-		clocks = <&sysclk5_ck>, <&sata_refclk>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/ahci-st.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/ahci-st.txt
deleted file mode 100644
index 909c9935360d..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-STMicroelectronics STi SATA controller
-
-This binding describes a SATA device.
-
-Required properties:
- - compatible	   : Must be "st,ahci"
- - reg		   : Physical base addresses and length of register sets
- - interrupts	   : Interrupt associated with the SATA device
- - interrupt-names :   Associated name must be; "hostc"
- - clocks	   : The phandle for the clock
- - clock-names	   :   Associated name must be; "ahci_clk"
- - phys		   : The phandle for the PHY port
- - phy-names	   :   Associated name must be; "ahci_phy"
-
-Optional properties:
- - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
- - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
-
-Example:
-
-	/* Example for stih407 family silicon */
-	sata0: sata@9b20000 {
-		compatible	= "st,ahci";
-		reg		= <0x9b20000 0x1000>;
-		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
-				  <&softreset STIH407_SATA0_SOFTRESET>,
-				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
-		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml
new file mode 100644
index 000000000000..7dc942808656
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/apm,xgene-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene 6.0 Gb/s SATA host controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - apm,xgene-ahci
+      - apm,xgene-ahci-pcie
+
+  reg:
+    minItems: 4
+    items:
+      - description: AHCI memory resource
+      - description: Host controller core
+      - description: Host controller diagnostic
+      - description: Host controller AXI
+      - description: Host controller MUX
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1a400000 {
+        compatible = "apm,xgene-ahci";
+        reg = <0x1a400000 0x1000>,
+              <0x1f220000 0x1000>,
+              <0x1f22d000 0x1000>,
+              <0x1f22e000 0x1000>,
+              <0x1f227000 0x1000>;
+        clocks = <&sataclk 0>;
+        dma-coherent;
+        interrupts = <0x0 0x87 0x4>;
+        phys = <&phy2 0>;
+        phy-names = "sata-phy";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/apm-xgene.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/apm-xgene.txt
deleted file mode 100644
index 02e690a675db..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/apm-xgene.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* APM X-Gene 6.0 Gb/s SATA host controller nodes
-
-SATA host controller nodes are defined to describe on-chip Serial ATA
-controllers. Each SATA controller (pair of ports) have its own node.
-
-Required properties:
-- compatible		: Shall contain:
-  * "apm,xgene-ahci"
-- reg			: First memory resource shall be the AHCI memory
-			  resource.
-			  Second memory resource shall be the host controller
-			  core memory resource.
-			  Third memory resource shall be the host controller
-			  diagnostic memory resource.
-			  4th memory resource shall be the host controller
-			  AXI memory resource.
-			  5th optional memory resource shall be the host
-			  controller MUX memory resource if required.
-- interrupts		: Interrupt-specifier for SATA host controller IRQ.
-- clocks		: Reference to the clock entry.
-- phys			: A list of phandles + phy-specifiers, one for each
-			  entry in phy-names.
-- phy-names		: Should contain:
-  * "sata-phy" for the SATA 6.0Gbps PHY
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent
-- status		: Shall be "ok" if enabled or "disabled" if disabled.
-			  Default is "ok".
-
-Example:
-		sataclk: sataclk {
-			compatible = "fixed-clock";
-			#clock-cells = <1>;
-			clock-frequency = <100000000>;
-			clock-output-names = "sataclk";
-		};
-
-		phy2: phy@1f22a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f22a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		phy3: phy@1f23a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f23a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		sata2: sata@1a400000 {
-			compatible = "apm,xgene-ahci";
-			reg = <0x0 0x1a400000 0x0 0x1000>,
-			      <0x0 0x1f220000 0x0 0x1000>,
-			      <0x0 0x1f22d000 0x0 0x1000>,
-			      <0x0 0x1f22e000 0x0 0x1000>,
-			      <0x0 0x1f227000 0x0 0x1000>;
-			interrupts = <0x0 0x87 0x4>;
-			dma-coherent;
-			clocks = <&sataclk 0>;
-			phys = <&phy2 0>;
-			phy-names = "sata-phy";
-		};
-
-		sata3: sata@1a800000 {
-			compatible = "apm,xgene-ahci-pcie";
-			reg = <0x0 0x1a800000 0x0 0x1000>,
-			      <0x0 0x1f230000 0x0 0x1000>,
-			      <0x0 0x1f23d000 0x0 0x1000>,
-			      <0x0 0x1f23e000 0x0 0x1000>,
-			      <0x0 0x1f237000 0x0 0x1000>;
-			interrupts = <0x0 0x88 0x4>;
-			dma-coherent;
-			clocks = <&sataclk 0>;
-			phys = <&phy3 0>;
-			phy-names = "sata-phy";
-		};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml
new file mode 100644
index 000000000000..4d7017452dda
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/arasan,cf-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan PATA Compact Flash Controller
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+properties:
+  compatible:
+    const: arasan,cf-spear1340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  arasan,broken-udma:
+    description: UDMA mode is unusable
+    type: boolean
+
+  arasan,broken-mwdma:
+    description: MWDMA mode is unusable
+    type: boolean
+
+  arasan,broken-pio:
+    description: PIO mode is unusable
+    type: boolean
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: data
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        required:
+          - arasan,broken-udma
+          - arasan,broken-mwdma
+    then:
+      required:
+        - dmas
+        - dma-names
+
+examples:
+  - |
+    cf@fc000000 {
+        compatible = "arasan,cf-spear1340";
+        reg = <0xfc000000 0x1000>;
+        interrupts = <12>;
+        dmas = <&dma 23>;
+        dma-names = "data";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml
new file mode 100644
index 000000000000..349f289b81e6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cavium,ebt3000-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Compact Flash
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  The Cavium Compact Flash device is connected to the Octeon Boot Bus, and is
+  thus a child of the Boot Bus device.  It can read and write industry standard
+  compact flash devices.
+
+properties:
+  compatible:
+    const: cavium,ebt3000-compact-flash
+
+  reg:
+    description: The base address of the CF chip select banks.
+    items:
+      - description: CF chip select bank 0
+      - description: CF chip select bank 1
+
+  cavium,bus-width:
+    description: The width of the connection to the CF devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  cavium,true-ide:
+    description: True IDE mode when present.
+    type: boolean
+
+  cavium,dma-engine-handle:
+    description: A phandle for the DMA Engine connected to this device.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        compact-flash@5,0 {
+            compatible = "cavium,ebt3000-compact-flash";
+            reg = <5 0 0x10000>, <6 0 0x10000>;
+            cavium,bus-width = <16>;
+            cavium,true-ide;
+            cavium,dma-engine-handle = <&dma0>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
deleted file mode 100644
index 3bacc8e0931e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Compact Flash
-
-The Cavium Compact Flash device is connected to the Octeon Boot Bus,
-and is thus a child of the Boot Bus device.  It can read and write
-industry standard compact flash devices.
-
-Properties:
-- compatible: "cavium,ebt3000-compact-flash";
-
-  Compatibility with many Cavium evaluation boards.
-
-- reg: The base address of the CF chip select banks.  Depending on
-  the device configuration, there may be one or two banks.
-
-- cavium,bus-width: The width of the connection to the CF devices.  Valid
-  values are 8 and 16.
-
-- cavium,true-ide: Optional, if present the CF connection is in True IDE mode.
-
-- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected
-  to this device.
-
-Example:
-	compact-flash@5,0 {
-		compatible = "cavium,ebt3000-compact-flash";
-		reg = <5 0 0x10000>, <6 0 0x10000>;
-		cavium,bus-width = <16>;
-		cavium,true-ide;
-		cavium,dma-engine-handle = <&dma0>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml
new file mode 100644
index 000000000000..f656ea9223d6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/marvell,orion-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SATA
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-sata
+      - marvell,armada-370-sata
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: '0'
+      - const: '1'
+      - const: '2'
+      - const: '3'
+      - const: '4'
+      - const: '5'
+      - const: '6'
+      - const: '7'
+
+  interrupts:
+    maxItems: 1
+
+  nr-ports:
+    description:
+      Number of SATA ports in use.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nr-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@80000 {
+        compatible = "marvell,orion-sata";
+        reg = <0x80000 0x5000>;
+        interrupts = <21>;
+        phys = <&sata_phy0>, <&sata_phy1>;
+        phy-names = "port0", "port1";
+        nr-ports = <2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/marvell.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/marvell.txt
deleted file mode 100644
index b460edd12766..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/marvell.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Marvell Orion SATA
-
-Required Properties:
-- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
-- reg           : Address range of controller
-- interrupts    : Interrupt controller is using
-- nr-ports      : Number of SATA ports in use.
-
-Optional Properties:
-- phys		: List of phandles to sata phys
-- phy-names	: Should be "0", "1", etc, one number per phandle
-
-Example:
-
-	sata@80000 {
-		compatible = "marvell,orion-sata";
-		reg = <0x80000 0x5000>;
-		interrupts = <21>;
-		phys = <&sata_phy0>, <&sata_phy1>;
-		phy-names = "0", "1";
-		nr-ports = <2>;
-	}
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/pata-arasan.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/pata-arasan.txt
deleted file mode 100644
index 872edc105680..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* ARASAN PATA COMPACT FLASH CONTROLLER
-
-Required properties:
-- compatible: "arasan,cf-spear1340"
-- reg: Address range of the CF registers
-- interrupt: Should contain the CF interrupt number
-- clock-frequency: Interface clock rate, in Hz, one of
-       25000000
-       33000000
-       40000000
-       50000000
-       66000000
-       75000000
-      100000000
-      125000000
-      150000000
-      166000000
-      200000000
-
-Optional properties:
-- arasan,broken-udma: if present, UDMA mode is unusable
-- arasan,broken-mwdma: if present, MWDMA mode is unusable
-- arasan,broken-pio: if present, PIO mode is unusable
-- dmas: one DMA channel, as described in bindings/dma/dma.txt
-  required unless both UDMA and MWDMA mode are broken
-- dma-names: the corresponding channel name, must be "data"
-
-Example:
-
-	cf@fc000000 {
-		compatible = "arasan,cf-spear1340";
-		reg = <0xfc000000 0x1000>;
-		interrupt-parent = <&vic1>;
-		interrupts = <12>;
-		dmas = <&dma-controller 23>;
-		dma-names = "data";
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
index 13eaa8d9a16e..b5ecaabfe2e2 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
@@ -20,6 +20,7 @@ select:
       contains:
         enum:
           - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3576-dwc-ahci
           - rockchip,rk3588-dwc-ahci
   required:
     - compatible
@@ -29,6 +30,7 @@ properties:
     items:
       - enum:
           - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3576-dwc-ahci
           - rockchip,rk3588-dwc-ahci
       - const: snps,dwc-ahci
 
@@ -83,6 +85,7 @@ allOf:
           contains:
             enum:
               - rockchip,rk3568-dwc-ahci
+              - rockchip,rk3576-dwc-ahci
     then:
       properties:
         clocks:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/st,ahci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/st,ahci.yaml
new file mode 100644
index 000000000000..6e8e4b4f3d6c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/st,ahci.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/st,ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SATA controller
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    const: st,ahci
+
+  interrupt-names:
+    items:
+      - const: hostc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ahci_clk
+
+  resets:
+    items:
+      - description: Power-down line
+      - description: Soft-reset line
+      - description: Power-reset line
+
+  reset-names:
+    items:
+      - const: pwr-dwn
+      - const: sw-rst
+      - const: pwr-rst
+
+required:
+  - compatible
+  - interrupt-names
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+
+    sata@9b20000 {
+        compatible    = "st,ahci";
+        reg           = <0x9b20000 0x1000>;
+        interrupts    = <GIC_SPI 159 IRQ_TYPE_NONE>;
+        interrupt-names = "hostc";
+        phys          = <&phy_port0 PHY_TYPE_SATA>;
+        phy-names     = "sata-phy";
+        resets        = <&powerdown STIH407_SATA0_POWERDOWN>,
+                         <&softreset STIH407_SATA0_SOFTRESET>,
+                         <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+        reset-names   = "pwr-dwn", "sw-rst", "pwr-rst";
+        clocks        = <&clk_s_c0_flexgen CLK_ICN_REG>;
+        clock-names   = "ahci_clk";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml
new file mode 100644
index 000000000000..d0ff9e78afe6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,dm816-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DM816 AHCI SATA Controller
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,dm816-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: functional clock
+      - description: external reference clock
+
+  ti,hwmods:
+    const: sata
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@4a140000 {
+        compatible = "ti,dm816-ahci";
+        reg = <0x4a140000 0x10000>;
+        interrupts = <16>;
+        clocks = <&sysclk5_ck>, <&sata_refclk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
index a8d40c766dcd..0bea4f5287ce 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Saurabh Sengar <ssengar@linux.microsoft.com>
 
 description:
-  VMBus is a software bus that implement the protocols for communication
-  between the root or host OS and guest OSs (virtual machines).
+  VMBus is a software bus that implements the protocols for communication
+  between the root or host OS and guest OS'es (virtual machines).
 
 properties:
   compatible:
@@ -25,9 +25,16 @@ properties:
   '#size-cells':
     const: 1
 
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt is used to report a message from the host.
+
 required:
   - compatible
   - ranges
+  - interrupts
   - '#address-cells'
   - '#size-cells'
 
@@ -35,6 +42,8 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     soc {
         #address-cells = <2>;
         #size-cells = <1>;
@@ -49,6 +58,9 @@ examples:
                 #address-cells = <2>;
                 #size-cells = <1>;
                 ranges = <0x0f 0xf0000000 0x0f 0xf0000000 0x10000000>;
+                dma-coherent;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_PPI 2 IRQ_TYPE_EDGE_RISING>;
             };
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
index 26362c9006e2..81a65e9f93f1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -21,6 +21,7 @@ properties:
       - const: nvidia,tegra210-aconnect
       - items:
           - enum:
+              - nvidia,tegra264-aconnect
               - nvidia,tegra234-aconnect
               - nvidia,tegra186-aconnect
               - nvidia,tegra194-aconnect
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
index d2cbe49f4e15..4de5bb2e5f24 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
@@ -28,6 +28,9 @@ select:
 properties:
   compatible:
     items:
+      - enum:
+          - andestech,qilai-ax45mp-cache
+          - renesas,r9a07g043f-ax45mp-cache
       - const: andestech,ax45mp-cache
       - const: cache
 
@@ -65,12 +68,27 @@ required:
   - cache-size
   - cache-unified
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: andestech,qilai-ax45mp-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+        cache-size:
+          const: 2097152
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
     cache-controller@13400000 {
-        compatible = "andestech,ax45mp-cache", "cache";
+        compatible = "renesas,r9a07g043f-ax45mp-cache", "andestech,ax45mp-cache",
+                     "cache";
         reg = <0x13400000 0x100000>;
         interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
         cache-line-size = <64>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
deleted file mode 100644
index 0d244b999d10..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell Feroceon Cache
-
-Required properties:
-- compatible : Should be either "marvell,feroceon-cache" or
-  	       "marvell,kirkwood-cache".
-
-Optional properties:
-- reg        : Address of the L2 cache control register. Mandatory for
-  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
-
-
-Example:
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
new file mode 100644
index 000000000000..2bfa3c29f6a6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,kirkwood-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Feroceon/Kirkwood Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - marvell,feroceon-cache
+      - marvell,kirkwood-cache
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,kirkwood-cache
+    then:
+      required:
+        - reg
+    else:
+      properties:
+        reg: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache@20128 {
+        compatible = "marvell,kirkwood-cache";
+        reg = <0x20128 0x4>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
deleted file mode 100644
index 31af1cbb60bd..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Marvell Tauros2 Cache
-
-Required properties:
-- compatible : Should be "marvell,tauros2-cache".
-- marvell,tauros2-cache-features : Specify the features supported for the
-  tauros2 cache.
-  The features including
-    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
-    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
-  The definition can be found at
-  arch/arm/include/asm/hardware/cache-tauros2.h
-
-Example:
-	L2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0x3>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
new file mode 100644
index 000000000000..9f7f0d031631
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,tauros2-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Tauros2 Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,tauros2-cache
+
+  marvell,tauros2-cache-features:
+    description: >
+      Specify the features supported for the tauros2 cache. The features include:
+
+        - CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+        - CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+
+      The definition can be found at arch/arm/include/asm/hardware/cache-tauros2.h
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x3
+
+required:
+  - compatible
+  - marvell,tauros2-cache-features
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache {
+        compatible = "marvell,tauros2-cache";
+        marvell,tauros2-cache-features = <0x3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
index e5effbb4a606..37e3ebd55487 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -40,6 +40,7 @@ properties:
       - qcom,sm8450-llcc
       - qcom,sm8550-llcc
       - qcom,sm8650-llcc
+      - qcom,sm8750-llcc
       - qcom,x1e80100-llcc
 
   reg:
@@ -274,6 +275,7 @@ allOf:
               - qcom,sm8450-llcc
               - qcom,sm8550-llcc
               - qcom,sm8650-llcc
+              - qcom,sm8750-llcc
     then:
       properties:
         reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
index 7e8cebe21584..579bacb66f34 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -39,6 +39,7 @@ properties:
           - const: cache
       - items:
           - enum:
+              - eswin,eic7700-l3-cache
               - starfive,jh7100-ccache
               - starfive,jh7110-ccache
           - const: sifive,ccache0
@@ -55,10 +56,10 @@ properties:
     enum: [2, 3]
 
   cache-sets:
-    enum: [1024, 2048]
+    enum: [1024, 2048, 4096]
 
   cache-size:
-    const: 2097152
+    enum: [2097152, 4194304]
 
   cache-unified: true
 
@@ -89,6 +90,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - eswin,eic7700-l3-cache
               - sifive,fu740-c000-ccache
               - starfive,jh7100-ccache
               - starfive,jh7110-ccache
@@ -108,6 +110,22 @@ allOf:
             Must contain entries for DirError, DataError and DataFail signals.
           maxItems: 3
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-size:
+          const: 4194304
+
+    else:
+      properties:
+        cache-size:
+          const: 2097152
+
   - if:
       properties:
         compatible:
@@ -122,11 +140,31 @@ allOf:
         cache-sets:
           const: 2048
 
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mpfs-ccache
+              - sifive,fu540-c000-ccache
+
+    then:
       properties:
         cache-sets:
           const: 1024
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 4096
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
index 70369bd633e4..7fcd55d468d4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -25,6 +25,7 @@ properties:
       - const: allwinner,sun50i-a64-de2-clk
       - const: allwinner,sun50i-h5-de2-clk
       - const: allwinner,sun50i-h6-de3-clk
+      - const: allwinner,sun50i-h616-de33-clk
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/altr_socfpga.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/altr_socfpga.txt
deleted file mode 100644
index f72e80e0dade..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Device Tree Clock bindings for Altera's SoCFPGA platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"altr,socfpga-pll-clock" - for a PLL clock
-	"altr,socfpga-perip-clock" - The peripheral clock divided from the
-		PLL clock.
-	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
-		can get gated.
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
-	either an oscillator or a pll output.
-- #clock-cells : from common clock binding, shall be set to 0.
-
-Optional properties:
-- fixed-divider : If clocks have a fixed divider value, use this property.
-- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
-        and the bit index.
-- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
-	the divider register, bit shift, and width.
-- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
-	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
-	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
-	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
-	can be 0-315 degrees, in 45 degree increments.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
deleted file mode 100644
index 4acfc8f641b6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom BCM2835 auxiliary peripheral support
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
-area controlling clock gating to the peripherals, and providing an IRQ
-status register.
-
-Required properties:
-- compatible:	Should be "brcm,bcm2835-aux"
-- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
-		  found in include/dt-bindings/clock/bcm2835-aux.h
-- reg:		Specifies base physical address and size of the registers
-- clocks:	The parent clock phandle
-
-Example:
-
-	clocks: cprman@7e101000 {
-		compatible = "brcm,bcm2835-cprman";
-		#clock-cells = <1>;
-		reg = <0x7e101000 0x2000>;
-		clocks = <&clk_osc>;
-	};
-
-	aux: aux@7e215004 {
-		compatible = "brcm,bcm2835-aux";
-		#clock-cells = <1>;
-		reg = <0x7e215000 0x8>;
-		clocks = <&clocks BCM2835_CLOCK_VPU>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml
new file mode 100644
index 000000000000..0f4050ffa41c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2835-aux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 auxiliary peripheral clock
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+  area controlling clock gating to the peripherals, and providing an IRQ
+  status register.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-aux
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    clock@7e215000 {
+        compatible = "brcm,bcm2835-aux";
+        reg = <0x7e215000 0x8>;
+        #clock-cells = <1>;
+        clocks = <&clocks BCM2835_CLOCK_VPU>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml
new file mode 100644
index 000000000000..29ae5be51acf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,vf610-ccm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock for Freescale Vybrid VF610 SOC
+
+description:
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+  for the full list of VF610 clock IDs
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: external crystal oscillator 32KHz, recommended
+      - description: external crystal oscillator 24MHz, recommended
+      - description: audio
+      - description: enet
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: sxosc
+      - const: fxosc
+      - const: enet_ext
+      - const: audio_ext
+    minItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@4006b000 {
+        compatible = "fsl,vf610-ccm";
+        reg = <0x4006b000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&sxosc>, <&fxosc>;
+        clock-names = "sxosc", "fxosc";
+    };
+
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/maxim,max77686.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/maxim,max77686.txt
deleted file mode 100644
index c10849efb444..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
-
-This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
-multi-function device. More information can be found in MFD DT binding
-doc as follows:
-	bindings/mfd/max77686.txt for MAX77686 and
-	bindings/mfd/max77802.txt for MAX77802 and
-	bindings/mfd/max77620.txt for MAX77620.
-
-The MAX77686 contains three 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77686.h.
-
-
-The MAX77802 contains two 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77802.h.
-
-The MAX77686 contains one 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77620.h.
-
-Following properties should be presend in main device node of the MFD chip.
-
-Required properties:
-
-- #clock-cells: from common clock binding; shall be set to 1.
-
-Optional properties:
-- clock-output-names: From common clock binding.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
-    - 1: 32khz_cp clock (max77686, max77802),
-    - 2: 32khz_pmic clock (max77686).
-
-Clocks are defined as preprocessor macros in above dt-binding header for
-respective chips.
-
-Example:
-
-1. With MAX77686:
-
-#include <dt-bindings/clock/maxim,max77686.h>
-/* ... */
-
-	Node of the MFD chip
-		max77686: max77686@9 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77686 MAX77686_CLK_PMIC>;
-		};
-
-2. With MAX77802:
-
-#include <dt-bindings/clock/maxim,max77802.h>
-/* ... */
-
-	Node of the MFD chip
-		max77802: max77802@9 {
-			compatible = "maxim,max77802";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77802 MAX77802_CLK_32K_AP>;
-		};
-
-
-3. With MAX77620:
-
-#include <dt-bindings/clock/maxim,max77620.h>
-/* ... */
-
-	Node of the MFD chip
-		max77620: max77620@3c {
-			compatible = "maxim,max77620";
-			reg = <0x3c>;
-			#clock-cells = <1>;
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
-		};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
index 2985c8c717d7..5403242545ab 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
@@ -52,6 +52,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 340c7e5cf980..5f7738d6835c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -14,6 +14,7 @@ description: |
   domains on Qualcomm SoCs.
 
   See also::
+    include/dt-bindings/clock/qcom,sm6350-videocc.h
     include/dt-bindings/clock/qcom,videocc-sc7180.h
     include/dt-bindings/clock/qcom,videocc-sc7280.h
     include/dt-bindings/clock/qcom,videocc-sdm845.h
@@ -26,6 +27,7 @@ properties:
       - qcom,sc7180-videocc
       - qcom,sc7280-videocc
       - qcom,sdm845-videocc
+      - qcom,sm6350-videocc
       - qcom,sm8150-videocc
       - qcom,sm8250-videocc
 
@@ -87,6 +89,24 @@ allOf:
             - const: bi_tcxo
             - const: bi_tcxo_ao
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Video AHB clock from GCC
+            - description: Board XO source
+            - description: Sleep Clock source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: sleep_clk
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
index c3fe76abd549..f261445bf341 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/{G3E,V2H(P)} Clock Pulse Generator (CPG)
+title: Renesas RZ/{G3E,V2H(P),V2N} Clock Pulse Generator (CPG)
 
 maintainers:
   - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
 
 description:
-  On Renesas RZ/{G3E,V2H(P)} SoCs, the CPG (Clock Pulse Generator) handles
+  On Renesas RZ/{G3E,V2H(P),V2N} SoCs, the CPG (Clock Pulse Generator) handles
   generation and control of clock signals for the IP modules, generation and
   control of resets, and control over booting, low power consumption and power
   supply domains.
@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - renesas,r9a09g047-cpg # RZ/G3E
+      - renesas,r9a09g056-cpg # RZ/V2N
       - renesas,r9a09g057-cpg # RZ/V2H
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
index 3330b2727474..6961a68098f4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
@@ -8,6 +8,7 @@ title: Samsung ExynosAuto v920 SoC clock controller
 
 maintainers:
   - Sunyeal Hong <sunyeal.hong@samsung.com>
+  - Shin Son <shin.son@samsung.com>
   - Chanwoo Choi <cw00.choi@samsung.com>
   - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -32,6 +33,9 @@ properties:
   compatible:
     enum:
       - samsung,exynosautov920-cmu-top
+      - samsung,exynosautov920-cmu-cpucl0
+      - samsung,exynosautov920-cmu-cpucl1
+      - samsung,exynosautov920-cmu-cpucl2
       - samsung,exynosautov920-cmu-peric0
       - samsung,exynosautov920-cmu-peric1
       - samsung,exynosautov920-cmu-misc
@@ -69,6 +73,71 @@ allOf:
           items:
             - const: oscclk
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL0 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL0 CLUSTER clock (from CMU_TOP)
+            - description: CMU_CPUCL0 DBG clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+            - const: dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL1 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL1 CLUSTER clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL2 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL2 CLUSTER clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
index 59ef41adb539..379ce3e9e391 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
@@ -11,10 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - sophgo,cv1800-clk
-      - sophgo,cv1810-clk
-      - sophgo,sg2000-clk
+    oneOf:
+      - enum:
+          - sophgo,cv1800b-clk
+          - sophgo,cv1812h-clk
+          - sophgo,sg2000-clk
+      - items:
+          - const: sophgo,sg2002-clk
+          - const: sophgo,sg2000-clk
+      - const: sophgo,cv1800-clk
+        deprecated: true
+      - const: sophgo,cv1810-clk
+        deprecated: true
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
new file mode 100644
index 000000000000..272e58bdb62c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2044-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2044 Clock Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@gmail.com>
+
+description: |
+  The Sophgo SG2044 clock controller requires an external oscillator
+  as input clock.
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/sophgo,sg2044-clk.h
+
+properties:
+  compatible:
+    const: sophgo,sg2044-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fpll0
+      - description: fpll1
+      - description: fpll2
+      - description: dpll0
+      - description: dpll1
+      - description: dpll2
+      - description: dpll3
+      - description: dpll4
+      - description: dpll5
+      - description: dpll6
+      - description: dpll7
+      - description: mpll0
+      - description: mpll1
+      - description: mpll2
+      - description: mpll3
+      - description: mpll4
+      - description: mpll5
+
+  clock-names:
+    items:
+      - const: fpll0
+      - const: fpll1
+      - const: fpll2
+      - const: dpll0
+      - const: dpll1
+      - const: dpll2
+      - const: dpll3
+      - const: dpll4
+      - const: dpll5
+      - const: dpll6
+      - const: dpll7
+      - const: mpll0
+      - const: mpll1
+      - const: mpll2
+      - const: mpll3
+      - const: mpll4
+      - const: mpll5
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,sg2044-pll.h>
+
+    clock-controller@50002000 {
+      compatible = "sophgo,sg2044-clk";
+      reg = <0x50002000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&syscon CLK_FPLL0>, <&syscon CLK_FPLL1>,
+               <&syscon CLK_FPLL2>, <&syscon CLK_DPLL0>,
+               <&syscon CLK_DPLL1>, <&syscon CLK_DPLL2>,
+               <&syscon CLK_DPLL3>, <&syscon CLK_DPLL4>,
+               <&syscon CLK_DPLL5>, <&syscon CLK_DPLL6>,
+               <&syscon CLK_DPLL7>, <&syscon CLK_MPLL0>,
+               <&syscon CLK_MPLL1>, <&syscon CLK_MPLL2>,
+               <&syscon CLK_MPLL3>, <&syscon CLK_MPLL4>,
+               <&syscon CLK_MPLL5>;
+      clock-names = "fpll0", "fpll1", "fpll2", "dpll0",
+                    "dpll1", "dpll2", "dpll3", "dpll4",
+                    "dpll5", "dpll6", "dpll7", "mpll0",
+                    "mpll1", "mpll2", "mpll3", "mpll4",
+                    "mpll5";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
new file mode 100644
index 000000000000..06bafd68c00a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/spacemit,k1-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 PLL
+
+maintainers:
+  - Haylen Chu <heylenay@4d2.org>
+
+properties:
+  compatible:
+    const: spacemit,k1-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: External 24MHz oscillator
+
+  spacemit,mpmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the "Main PMU (MPMU)" syscon. It is used to check PLL
+      lock status.
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - spacemit,mpmu
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4090000 {
+        compatible = "spacemit,k1-pll";
+        reg = <0xd4090000 0x1000>;
+        clocks = <&vctcxo_24m>;
+        spacemit,mpmu = <&sysctl_mpmu>;
+        #clock-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
deleted file mode 100644
index cac24ee10b72..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-STMicroelectronics STM32H7 Reset and Clock Controller
-=====================================================
-
-The RCC IP is both a reset and a clock controller.
-
-Please refer to clock-bindings.txt for common clock controller binding usage.
-Please also refer to reset.txt for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be:
-  "st,stm32h743-rcc"
-
-- reg: should be register base and length as documented in the
-  datasheet
-
-- #reset-cells: 1, see below
-
-- #clock-cells : from common clock binding; shall be set to 1
-
-- clocks: External oscillator clock phandle
-  - high speed external clock signal (HSE)
-  - low speed external clock signal (LSE)
-  - external I2S clock (I2S_CKIN)
-
-Optional properties:
-- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
-  write protection (RTC clock).
-
-Example:
-
-	rcc: reset-clock-controller@58024400 {
-		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
-		reg = <0x58024400 0x400>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
-
-		st,syscfg = <&pwrcfg>;
-};
-
-The peripheral clock consumer should specify the desired clock by
-having the clock ID in its "clocks" phandle cell.
-
-Example:
-
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc TIM5_CK>;
-		};
-
-Specifying softreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the reset device node and an index specifying
-which channel to use.
-The index is the bit number within the RCC registers bank, starting from RCC
-base address.
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register.
-
-For example, for CRC reset:
-  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
-
-Example:
-
-	timer2 {
-		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
index 0129bd0ba4b3..9d058c00ab3d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
@@ -8,7 +8,8 @@ title: T-HEAD TH1520 AP sub-system clock controller
 
 description: |
   The T-HEAD TH1520 AP sub-system clock controller configures the
-  CPU, DPU, GMAC and TEE PLLs.
+  CPU, DPU, GMAC and TEE PLLs. Additionally the VO subsystem configures
+  the clock gates for the HDMI, MIPI and the GPU.
 
   SoC reference manual
   https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
@@ -20,14 +21,24 @@ maintainers:
 
 properties:
   compatible:
-    const: thead,th1520-clk-ap
+    enum:
+      - thead,th1520-clk-ap
+      - thead,th1520-clk-vo
 
   reg:
     maxItems: 1
 
   clocks:
     items:
-      - description: main oscillator (24MHz)
+      - description: |
+          One input clock:
+          - For "thead,th1520-clk-ap": the clock input must be the 24 MHz
+            main oscillator.
+          - For "thead,th1520-clk-vo": the clock input must be the VIDEO_PLL,
+            which is configured by the AP clock controller. According to the
+            TH1520 manual, VIDEO_PLL is a Silicon Creations Sigma-Delta PLL
+            (integer PLL) typically running at 792 MHz (FOUTPOSTDIV), with
+            a maximum FOUTVCO of 2376 MHz.
 
   "#clock-cells":
     const: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/vf610-clock.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/clock/vf610-clock.txt
deleted file mode 100644
index 109ffa3a5b66..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/clock/vf610-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Freescale Vybrid VF610 SOC
-
-Required properties:
-- compatible: Should be "fsl,vf610-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-Optional properties:
-- clocks: list of clock identifiers which are external input clocks to the
-	given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-- clock-names: list of names of clocks which are external input clocks to the
-	given clock controller.
-
-Input clocks for top clock controller:
-	- sxosc (external crystal oscillator 32KHz, recommended)
-	- fxosc (external crystal oscillator 24MHz, recommended)
-	- audio_ext
-	- enet_ext
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
-for the full list of VF610 clock IDs.
-
-Examples:
-
-clks: ccm@4006b000 {
-	compatible = "fsl,vf610-ccm";
-	reg = <0x4006b000 0x1000>;
-	#clock-cells = <1>;
-	clocks = <&sxosc>, <&fxosc>;
-	clock-names = "sxosc", "fxosc";
-};
-
-uart1: serial@40028000 {
-	compatible = "fsl,vf610-uart";
-	reg = <0x40028000 0x1000>;
-	interrupts = <0 62 0x04>;
-	clocks = <&clks VF610_CLK_UART1>;
-	clock-names = "ipg";
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml
new file mode 100644
index 000000000000..384ca63b64d5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/fsl,ftm-quaddec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FlexTimer Quadrature decoder counter
+
+description:
+  Exposes a simple counter for the quadrature decoder mode.
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ftm-quaddec
+
+  reg:
+    maxItems: 1
+
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    counter@29d0000 {
+       compatible = "fsl,ftm-quaddec";
+       reg = <0x29d0000 0x10000>;
+       big-endian;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/counter/ftm-quaddec.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
deleted file mode 100644
index 4d18cd722074..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-FlexTimer Quadrature decoder counter
-
-This driver exposes a simple counter for the quadrature decoder mode.
-
-Required properties:
-- compatible:		Must be "fsl,ftm-quaddec".
-- reg:			Must be set to the memory region of the flextimer.
-
-Optional property:
-- big-endian:		Access the device registers in big-endian mode.
-
-Example:
-		counter0: counter@29d0000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x29d0000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cpu/cpu-topology.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/cpu/cpu-topology.txt
deleted file mode 100644
index 9bd530a35d14..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cpu/cpu-topology.txt
+++ /dev/null
@@ -1,553 +0,0 @@
-===========================================
-CPU topology binding description
-===========================================
-
-===========================================
-1 - Introduction
-===========================================
-
-In a SMP system, the hierarchy of CPUs is defined through three entities that
-are used to describe the layout of physical CPUs in the system:
-
-- socket
-- cluster
-- core
-- thread
-
-The bottom hierarchy level sits at core or thread level depending on whether
-symmetric multi-threading (SMT) is supported or not.
-
-For instance in a system where CPUs support SMT, "cpu" nodes represent all
-threads existing in the system and map to the hierarchy level "thread" above.
-In systems where SMT is not supported "cpu" nodes represent all cores present
-in the system and map to the hierarchy level "core" above.
-
-CPU topology bindings allow one to associate cpu nodes with hierarchical groups
-corresponding to the system hierarchy; syntactically they are defined as device
-tree nodes.
-
-Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be
-used for any other architecture as well.
-
-The cpu nodes, as per bindings defined in [4], represent the devices that
-correspond to physical CPUs and are to be mapped to the hierarchy levels.
-
-A topology description containing phandles to cpu nodes that are not compliant
-with bindings standardized in [4] is therefore considered invalid.
-
-===========================================
-2 - cpu-map node
-===========================================
-
-The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct
-child of the cpus node and provides a container where the actual topology
-nodes are listed.
-
-- cpu-map node
-
-	Usage: Optional - On SMP systems provide CPUs topology to the OS.
-			  Uniprocessor systems do not require a topology
-			  description and therefore should not define a
-			  cpu-map node.
-
-	Description: The cpu-map node is just a container node where its
-		     subnodes describe the CPU topology.
-
-	Node name must be "cpu-map".
-
-	The cpu-map node's parent node must be the cpus node.
-
-	The cpu-map node's child nodes can be:
-
-	- one or more cluster nodes or
-	- one or more socket nodes in a multi-socket system
-
-	Any other configuration is considered invalid.
-
-The cpu-map node can only contain 4 types of child nodes:
-
-- socket node
-- cluster node
-- core node
-- thread node
-
-whose bindings are described in paragraph 3.
-
-The nodes describing the CPU topology (socket/cluster/core/thread) can
-only be defined within the cpu-map node and every core/thread in the
-system must be defined within the topology.  Any other configuration is
-invalid and therefore must be ignored.
-
-===========================================
-2.1 - cpu-map child nodes naming convention
-===========================================
-
-cpu-map child nodes must follow a naming convention where the node name
-must be "socketN", "clusterN", "coreN", "threadN" depending on the node type
-(ie socket/cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes
-which are siblings within a single common parent node must be given a unique and
-sequential N value, starting from 0).
-cpu-map child nodes which do not share a common parent node can have the same
-name (ie same number N as other cpu-map child nodes at different device tree
-levels) since name uniqueness will be guaranteed by the device tree hierarchy.
-
-===========================================
-3 - socket/cluster/core/thread node bindings
-===========================================
-
-Bindings for socket/cluster/cpu/thread nodes are defined as follows:
-
-- socket node
-
-	 Description: must be declared within a cpu-map node, one node
-		      per physical socket in the system. A system can
-		      contain single or multiple physical socket.
-		      The association of sockets and NUMA nodes is beyond
-		      the scope of this bindings, please refer [2] for
-		      NUMA bindings.
-
-	This node is optional for a single socket system.
-
-	The socket node name must be "socketN" as described in 2.1 above.
-	A socket node can not be a leaf node.
-
-	A socket node's child nodes must be one or more cluster nodes.
-
-	Any other configuration is considered invalid.
-
-- cluster node
-
-	 Description: must be declared within a cpu-map node, one node
-		      per cluster. A system can contain several layers of
-		      clustering within a single physical socket and cluster
-		      nodes can be contained in parent cluster nodes.
-
-	The cluster node name must be "clusterN" as described in 2.1 above.
-	A cluster node can not be a leaf node.
-
-	A cluster node's child nodes must be:
-
-	- one or more cluster nodes; or
-	- one or more core nodes
-
-	Any other configuration is considered invalid.
-
-- core node
-
-	Description: must be declared in a cluster node, one node per core in
-		     the cluster. If the system does not support SMT, core
-		     nodes are leaf nodes, otherwise they become containers of
-		     thread nodes.
-
-	The core node name must be "coreN" as described in 2.1 above.
-
-	A core node must be a leaf node if SMT is not supported.
-
-	Properties for core nodes that are leaf nodes:
-
-	- cpu
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle to the cpu node that corresponds to the
-			    core node.
-
-	If a core node is not a leaf node (CPUs supporting SMT) a core node's
-	child nodes can be:
-
-	- one or more thread nodes
-
-	Any other configuration is considered invalid.
-
-- thread node
-
-	Description: must be declared in a core node, one node per thread
-		     in the core if the system supports SMT. Thread nodes are
-		     always leaf nodes in the device tree.
-
-	The thread node name must be "threadN" as described in 2.1 above.
-
-	A thread node must be a leaf node.
-
-	A thread node must contain the following property:
-
-	- cpu
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle to the cpu node that corresponds to
-			    the thread node.
-
-===========================================
-4 - Example dts
-===========================================
-
-Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters in a single
-physical socket):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <2>;
-
-	cpu-map {
-		socket0 {
-			cluster0 {
-				cluster0 {
-					core0 {
-						thread0 {
-							cpu = <&CPU0>;
-						};
-						thread1 {
-							cpu = <&CPU1>;
-						};
-					};
-
-					core1 {
-						thread0 {
-							cpu = <&CPU2>;
-						};
-						thread1 {
-							cpu = <&CPU3>;
-						};
-					};
-				};
-
-				cluster1 {
-					core0 {
-						thread0 {
-							cpu = <&CPU4>;
-						};
-						thread1 {
-							cpu = <&CPU5>;
-						};
-					};
-
-					core1 {
-						thread0 {
-							cpu = <&CPU6>;
-						};
-						thread1 {
-							cpu = <&CPU7>;
-						};
-					};
-				};
-			};
-
-			cluster1 {
-				cluster0 {
-					core0 {
-						thread0 {
-							cpu = <&CPU8>;
-						};
-						thread1 {
-							cpu = <&CPU9>;
-						};
-					};
-					core1 {
-						thread0 {
-							cpu = <&CPU10>;
-						};
-						thread1 {
-							cpu = <&CPU11>;
-						};
-					};
-				};
-
-				cluster1 {
-					core0 {
-						thread0 {
-							cpu = <&CPU12>;
-						};
-						thread1 {
-							cpu = <&CPU13>;
-						};
-					};
-					core1 {
-						thread0 {
-							cpu = <&CPU14>;
-						};
-						thread1 {
-							cpu = <&CPU15>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU4: cpu@10000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU5: cpu@10001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU6: cpu@10100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU7: cpu@10101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU8: cpu@100000000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU9: cpu@100000001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU10: cpu@100000100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU11: cpu@100000101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU12: cpu@100010000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU13: cpu@100010001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU14: cpu@100010100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU15: cpu@100010101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-};
-
-Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <1>;
-
-	cpu-map {
-		cluster0 {
-			core0 {
-				cpu = <&CPU0>;
-			};
-			core1 {
-				cpu = <&CPU1>;
-			};
-			core2 {
-				cpu = <&CPU2>;
-			};
-			core3 {
-				cpu = <&CPU3>;
-			};
-		};
-
-		cluster1 {
-			core0 {
-				cpu = <&CPU4>;
-			};
-			core1 {
-				cpu = <&CPU5>;
-			};
-			core2 {
-				cpu = <&CPU6>;
-			};
-			core3 {
-				cpu = <&CPU7>;
-			};
-		};
-	};
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x0>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x1>;
-	};
-
-	CPU2: cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x2>;
-	};
-
-	CPU3: cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x3>;
-	};
-
-	CPU4: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x100>;
-	};
-
-	CPU5: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x101>;
-	};
-
-	CPU6: cpu@102 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x102>;
-	};
-
-	CPU7: cpu@103 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x103>;
-	};
-};
-
-Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system)
-
-{
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "sifive,fu540g", "sifive,fu500";
-	model = "sifive,hifive-unleashed-a00";
-
-	...
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu-map {
-			socket0 {
-				cluster0 {
-					core0 {
-						cpu = <&CPU1>;
-					};
-					core1 {
-						cpu = <&CPU2>;
-					};
-					core2 {
-						cpu0 = <&CPU2>;
-					};
-					core3 {
-						cpu0 = <&CPU3>;
-					};
-				};
-			};
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x1>;
-		}
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x2>;
-		}
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x3>;
-		}
-		CPU4: cpu@4 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x4>;
-		}
-	}
-};
-===============================================================================
-[1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.yaml
-[2] Devicetree NUMA binding description
-    Documentation/devicetree/bindings/numa.txt
-[3] RISC-V Linux kernel documentation
-    Documentation/devicetree/bindings/riscv/cpus.yaml
-[4] https://www.devicetree.org/specifications/
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
deleted file mode 100644
index e0a4ba599abc..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ /dev/null
@@ -1,250 +0,0 @@
-Binding for MediaTek's CPUFreq driver
-=====================================
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
-	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-	for detail.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-- mediatek,cci:
-	Used to confirm the link status between cpufreq and mediatek cci. Because
-	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
-	To prevent the issue of high frequency and low voltage, we need to use this
-	property to make sure mediatek cci is ready.
-	For details of mediatek cci, please refer to
-	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
-- #cooling-cells:
-	For details, please refer to
-	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-
-Example 1 (MT7623 SoC):
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-598000000 {
-			opp-hz = /bits/ 64 <598000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-747500000 {
-			opp-hz = /bits/ 64 <747500000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-1040000000 {
-			opp-hz = /bits/ 64 <1040000000>;
-			opp-microvolt = <1150000>;
-		};
-
-		opp-1196000000 {
-			opp-hz = /bits/ 64 <1196000000>;
-			opp-microvolt = <1200000>;
-		};
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1300000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x0>;
-		clocks = <&infracfg CLK_INFRA_CPUSEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table>;
-		#cooling-cells = <2>;
-	};
-	cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x1>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x2>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x3>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-
-Example 2 (MT8173 SoC):
-	cpu_opp_table_a: opp_table_a {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <859000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <908000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <983000>;
-		};
-
-		opp-1105000000 {
-			opp-hz = /bits/ 64 <1105000000>;
-			opp-microvolt = <1009000>;
-		};
-
-		opp-1183000000 {
-			opp-hz = /bits/ 64 <1183000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1404000000>;
-			opp-microvolt = <1083000>;
-		};
-
-		opp-1508000000 {
-			opp-hz = /bits/ 64 <1508000000>;
-			opp-microvolt = <1109000>;
-		};
-
-		opp-1573000000 {
-			opp-hz = /bits/ 64 <1573000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu_opp_table_b: opp_table_b {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <828000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <867000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <927000>;
-		};
-
-		opp-1209000000 {
-			opp-hz = /bits/ 64 <1209000000>;
-			opp-microvolt = <968000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1007000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1612000000 {
-			opp-hz = /bits/ 64 <1612000000>;
-			opp-microvolt = <1049000>;
-		};
-
-		opp-1807000000 {
-			opp-hz = /bits/ 64 <1807000000>;
-			opp-microvolt = <1089000>;
-		};
-
-		opp-1989000000 {
-			opp-hz = /bits/ 64 <1989000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml
new file mode 100644
index 000000000000..32bf3a1c3b42
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/amd,ccp-seattle-v1a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Cryptographic Coprocessor (ccp)
+
+maintainers:
+  - Tom Lendacky <thomas.lendacky@amd.com>
+
+properties:
+  compatible:
+    const: amd,ccp-seattle-v1a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@e0100000 {
+        compatible = "amd,ccp-seattle-v1a";
+        reg = <0xe0100000 0x10000>;
+        interrupts = <0 3 4>;
+        dma-coherent;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/amd-ccp.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/amd-ccp.txt
deleted file mode 100644
index d87579d63da6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/amd-ccp.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* AMD Cryptographic Coprocessor driver (ccp)
-
-Required properties:
-- compatible: Should be "amd,ccp-seattle-v1a"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the CCP interrupt
-
-Optional properties:
-- dma-coherent: Present if dma operations are coherent
-
-Example:
-	ccp@e0100000 {
-		compatible = "amd,ccp-seattle-v1a";
-		reg = <0 0xe0100000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 3 4>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
deleted file mode 100644
index d9cca4875bd6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Axis crypto engine with PDMA interface.
-
-Required properties:
-- compatible : Should be one of the following strings:
-	"axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC
-	"axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC.
-- reg: Base address and size for the PDMA register area.
-- interrupts: Interrupt handle for the PDMA interrupt line.
-
-Example:
-
-crypto@f4264000 {
-	compatible = "axis,artpec6-crypto";
-	reg = <0xf4264000 0x1000>;
-	interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml
new file mode 100644
index 000000000000..c91f81e3c39e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/axis,artpec6-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC6 crypto engine with PDMA interface
+
+maintainers:
+  - Lars Persson <lars.persson@axis.com>
+
+properties:
+  compatible:
+    enum:
+      - axis,artpec6-crypto
+      - axis,artpec7-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    crypto@f4264000 {
+        compatible = "axis,artpec6-crypto";
+        reg = <0xf4264000 0x1000>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
deleted file mode 100644
index 29b6007568eb..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-The Broadcom Secure Processing Unit (SPU) hardware supports symmetric
-cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware
-blocks.
-
-Required properties:
-- compatible: Should be one of the following:
-  brcm,spum-crypto - for devices with SPU-M hardware
-  brcm,spu2-crypto - for devices with SPU2 hardware
-  brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3
-  and Rabin Fingerprint support
-  brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware
-
-- reg: Should contain SPU registers location and length.
-- mboxes: The mailbox channel to be used to communicate with the SPU.
-  Mailbox channels correspond to DMA rings on the device.
-
-Example:
-	crypto@612d0000 {
-		compatible = "brcm,spum-crypto";
-		reg = <0 0x612d0000 0 0x900>;
-		mboxes = <&pdc0 0>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml
new file mode 100644
index 000000000000..9a5fb61727fa
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/brcm,spum-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SPU Crypto Offload
+
+maintainers:
+  - Rob Rice <rob.rice@broadcom.com>
+
+description:
+  The Broadcom Secure Processing Unit (SPU) hardware supports symmetric
+  cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware
+  blocks.
+
+properties:
+  compatible:
+    enum:
+      - brcm,spum-crypto
+      - brcm,spu2-crypto
+      - brcm,spu2-v2-crypto     # enhanced SPU2 hardware features like SHA3 and Rabin Fingerprint support
+      - brcm,spum-nsp-crypto    # Northstar Plus variant of the SPU-M hardware
+
+  reg:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@612d0000 {
+        compatible = "brcm,spum-crypto";
+        reg = <0x612d0000 0x900>;
+        mboxes = <&pdc0 0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
index e879bc0be8e2..9f8e6689cd94 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -83,6 +83,8 @@ properties:
       by SNVS ONOFF, the driver can report the status of POWER key and wakeup
       system if pressed after system suspend.
 
+    $ref: /schemas/input/input.yaml
+
     properties:
       compatible:
         const: fsl,sec-v4.0-pwrkey
@@ -111,6 +113,9 @@ properties:
         maxItems: 1
         default: 116
 
+      power-off-time-sec:
+        enum: [0, 5, 10, 15]
+
     required:
       - compatible
       - interrupts
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
index f0c4a7c83568..75afa441e019 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
@@ -38,7 +38,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: fsl,sec-v5.4
+          - enum:
+              - fsl,sec-v5.4
+              - fsl,sec-v6.0
           - const: fsl,sec-v5.0
           - const: fsl,sec-v4.0
       - items:
@@ -93,6 +95,12 @@ patternProperties:
     properties:
       compatible:
         oneOf:
+          - items:
+              - const: fsl,sec-v6.0-job-ring
+              - const: fsl,sec-v5.2-job-ring
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.4-job-ring
+              - const: fsl,sec-v4.0-job-ring
           - items:
               - const: fsl,sec-v5.4-job-ring
               - const: fsl,sec-v5.0-job-ring
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl-sec6.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
deleted file mode 100644
index 73b0eb950bb3..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
-Currently Freescale powerpc chip C29X is embedded with SEC 6.
-SEC 6 device tree binding include:
-   -SEC 6 Node
-   -Job Ring Node
-   -Full Example
-
-=====================================================================
-SEC 6 Node
-
-Description
-
-    Node defines the base address of the SEC 6 block.
-    This block specifies the address range of all global
-    configuration registers for the SEC 6 block.
-    For example, In C293, we could see three SEC 6 node.
-
-PROPERTIES
-
-   - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v6.0".
-
-   - fsl,sec-era
-      Usage: optional
-      Value type: <u32>
-      Definition: A standard property. Define the 'ERA' of the SEC
-          device.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.
-
-   - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC 6 configuration registers.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 6.0 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-   Note: All other standard properties (see the Devicetree Specification)
-   are allowed but are optional.
-
-EXAMPLE
-	crypto@a0000 {
-		compatible = "fsl,sec-v6.0";
-		fsl,sec-era = <6>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xa0000 0x20000>;
-		ranges = <0 0xa0000 0x20000>;
-	};
-
-=====================================================================
-Job Ring (JR) Node
-
-    Child of the crypto node defines data processing interface to SEC 6
-    across the peripheral bus for purposes of processing
-    cryptographic descriptors. The specified address
-    range can be made visible to one (or more) cores.
-    The interrupt defined for this node is controlled within
-    the address range of this node.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v6.0-job-ring".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: Specifies a two JR parameters:  an offset from
-           the parent physical address and the length the JR registers.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	jr@1000 {
-		compatible = "fsl,sec-v6.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <49 2 0 0>;
-	};
-
-===================================================================
-Full Example
-
-Since some chips may contain more than one SEC, the dtsi contains
-only the node contents, not the node itself.  A chip using the SEC
-should include the dtsi inside each SEC node.  Example:
-
-In qoriq-sec6.0.dtsi:
-
-	compatible = "fsl,sec-v6.0";
-	fsl,sec-era = <6>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	jr@1000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x1000 0x1000>;
-	};
-
-	jr@2000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x2000 0x1000>;
-	};
-
-In the C293 device tree, we add the include of public property:
-
-	crypto@a0000 {
-		/include/ "qoriq-sec6.0.dtsi"
-	}
-
-	crypto@a0000 {
-		reg = <0xa0000 0x20000>;
-		ranges = <0 0xa0000 0x20000>;
-
-		jr@1000 {
-			interrupts = <49 2 0 0>;
-		};
-
-		jr@2000 {
-			interrupts = <50 2 0 0>;
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml
new file mode 100644
index 000000000000..2bfac9d1c020
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/hisilicon,hip06-sec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon hip06/hip07 Security Accelerator
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hip06-sec
+      - hisilicon,hip07-sec
+
+  reg:
+    items:
+      - description: Registers for backend processing engines
+      - description: Registers for common functionality
+      - description: Registers for queue 0
+      - description: Registers for queue 1
+      - description: Registers for queue 2
+      - description: Registers for queue 3
+      - description: Registers for queue 4
+      - description: Registers for queue 5
+      - description: Registers for queue 6
+      - description: Registers for queue 7
+      - description: Registers for queue 8
+      - description: Registers for queue 9
+      - description: Registers for queue 10
+      - description: Registers for queue 11
+      - description: Registers for queue 12
+      - description: Registers for queue 13
+      - description: Registers for queue 14
+      - description: Registers for queue 15
+
+  interrupts:
+    items:
+      - description: SEC unit error queue interrupt
+      - description: Completion interrupt for queue 0
+      - description: Error interrupt for queue 0
+      - description: Completion interrupt for queue 1
+      - description: Error interrupt for queue 1
+      - description: Completion interrupt for queue 2
+      - description: Error interrupt for queue 2
+      - description: Completion interrupt for queue 3
+      - description: Error interrupt for queue 3
+      - description: Completion interrupt for queue 4
+      - description: Error interrupt for queue 4
+      - description: Completion interrupt for queue 5
+      - description: Error interrupt for queue 5
+      - description: Completion interrupt for queue 6
+      - description: Error interrupt for queue 6
+      - description: Completion interrupt for queue 7
+      - description: Error interrupt for queue 7
+      - description: Completion interrupt for queue 8
+      - description: Error interrupt for queue 8
+      - description: Completion interrupt for queue 9
+      - description: Error interrupt for queue 9
+      - description: Completion interrupt for queue 10
+      - description: Error interrupt for queue 10
+      - description: Completion interrupt for queue 11
+      - description: Error interrupt for queue 11
+      - description: Completion interrupt for queue 12
+      - description: Error interrupt for queue 12
+      - description: Completion interrupt for queue 13
+      - description: Error interrupt for queue 13
+      - description: Completion interrupt for queue 14
+      - description: Error interrupt for queue 14
+      - description: Completion interrupt for queue 15
+      - description: Error interrupt for queue 15
+
+  dma-coherent: true
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dma-coherent
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        crypto@400d2000000 {
+            compatible = "hisilicon,hip07-sec";
+            reg = <0x400 0xd0000000 0x0 0x10000
+                  0x400 0xd2000000 0x0 0x10000
+                  0x400 0xd2010000 0x0 0x10000
+                  0x400 0xd2020000 0x0 0x10000
+                  0x400 0xd2030000 0x0 0x10000
+                  0x400 0xd2040000 0x0 0x10000
+                  0x400 0xd2050000 0x0 0x10000
+                  0x400 0xd2060000 0x0 0x10000
+                  0x400 0xd2070000 0x0 0x10000
+                  0x400 0xd2080000 0x0 0x10000
+                  0x400 0xd2090000 0x0 0x10000
+                  0x400 0xd20a0000 0x0 0x10000
+                  0x400 0xd20b0000 0x0 0x10000
+                  0x400 0xd20c0000 0x0 0x10000
+                  0x400 0xd20d0000 0x0 0x10000
+                  0x400 0xd20e0000 0x0 0x10000
+                  0x400 0xd20f0000 0x0 0x10000
+                  0x400 0xd2100000 0x0 0x10000>;
+            interrupts = <576 4>,
+                        <577 1>, <578 4>,
+                        <579 1>, <580 4>,
+                        <581 1>, <582 4>,
+                        <583 1>, <584 4>,
+                        <585 1>, <586 4>,
+                        <587 1>, <588 4>,
+                        <589 1>, <590 4>,
+                        <591 1>, <592 4>,
+                        <593 1>, <594 4>,
+                        <595 1>, <596 4>,
+                        <597 1>, <598 4>,
+                        <599 1>, <600 4>,
+                        <601 1>, <602 4>,
+                        <603 1>, <604 4>,
+                        <605 1>, <606 4>,
+                        <607 1>, <608 4>;
+            dma-coherent;
+            iommus = <&p1_smmu_alg_a 0x600>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
deleted file mode 100644
index d28fd1af01b4..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Hisilicon hip07 Security Accelerator (SEC)
-
-Required properties:
-- compatible: Must contain one of
-  - "hisilicon,hip06-sec"
-  - "hisilicon,hip07-sec"
-- reg: Memory addresses and lengths of the memory regions through which
-  this device is controlled.
-  Region 0 has registers to control the backend processing engines.
-  Region 1 has registers for functionality common to all queues.
-  Regions 2-18 have registers for the 16 individual queues which are isolated
-  both in hardware and within the driver.
-- interrupts: Interrupt specifiers.
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
-  bindings.
-  Interrupt 0 is for the SEC unit error queue.
-  Interrupt 2N + 1 is the completion interrupt for queue N.
-  Interrupt 2N + 2 is the error interrupt for queue N.
-- dma-coherent:  The driver assumes coherent dma is possible.
-
-Optional properties:
-- iommus: The SEC units are behind smmu-v3 iommus.
-  Refer to iommu/arm,smmu-v3.txt for more information.
-
-Example:
-
-p1_sec_a: crypto@400d2000000 {
-	compatible = "hisilicon,hip07-sec";
-	reg = <0x400 0xd0000000 0x0 0x10000
-	       0x400 0xd2000000 0x0 0x10000
-	       0x400 0xd2010000 0x0 0x10000
-	       0x400 0xd2020000 0x0 0x10000
-	       0x400 0xd2030000 0x0 0x10000
-	       0x400 0xd2040000 0x0 0x10000
-	       0x400 0xd2050000 0x0 0x10000
-	       0x400 0xd2060000 0x0 0x10000
-	       0x400 0xd2070000 0x0 0x10000
-	       0x400 0xd2080000 0x0 0x10000
-	       0x400 0xd2090000 0x0 0x10000
-	       0x400 0xd20a0000 0x0 0x10000
-	       0x400 0xd20b0000 0x0 0x10000
-	       0x400 0xd20c0000 0x0 0x10000
-	       0x400 0xd20d0000 0x0 0x10000
-	       0x400 0xd20e0000 0x0 0x10000
-	       0x400 0xd20f0000 0x0 0x10000
-	       0x400 0xd2100000 0x0 0x10000>;
-	interrupt-parent = <&p1_mbigen_sec_a>;
-	iommus = <&p1_smmu_alg_a 0x600>;
-	dma-coherent;
-	interrupts = <576 4>,
-		     <577 1>, <578 4>,
-		     <579 1>, <580 4>,
-		     <581 1>, <582 4>,
-		     <583 1>, <584 4>,
-		     <585 1>, <586 4>,
-		     <587 1>, <588 4>,
-		     <589 1>, <590 4>,
-		     <591 1>, <592 4>,
-		     <593 1>, <594 4>,
-		     <595 1>, <596 4>,
-		     <597 1>, <598 4>,
-		     <599 1>, <600 4>,
-		     <601 1>, <602 4>,
-		     <603 1>, <604 4>,
-		     <605 1>, <606 4>,
-		     <607 1>, <608 4>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml
new file mode 100644
index 000000000000..46617561ef94
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/img,hash-accelerator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies hardware hash accelerator
+
+maintainers:
+  - James Hartley <james.hartley@imgtec.com>
+
+description:
+  The hash accelerator provides hardware hashing acceleration for
+  SHA1, SHA224, SHA256 and MD5 hashes.
+
+properties:
+  compatible:
+    const: img,hash-accelerator
+
+  reg:
+    items:
+      - description: Register base address and size
+      - description: DMA port specifier
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  clocks:
+    items:
+      - description: System clock for hash block registers
+      - description: Hash clock for data path
+
+  clock-names:
+    items:
+      - const: sys
+      - const: hash
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/clock/pistachio-clk.h>
+
+    hash@18149600 {
+        compatible = "img,hash-accelerator";
+        reg = <0x18149600 0x100>, <0x18101100 0x4>;
+        interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma 8 0xffffffff 0>;
+        dma-names = "tx";
+        clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>;
+        clock-names = "sys", "hash";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/img-hash.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/img-hash.txt
deleted file mode 100644
index 91a3d757d641..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/img-hash.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Imagination Technologies hardware hash accelerator
-
-The hash accelerator provides hardware hashing acceleration for
-SHA1, SHA224, SHA256 and MD5 hashes
-
-Required properties:
-
-- compatible : "img,hash-accelerator"
-- reg : Offset and length of the register set for the module, and the DMA port
-- interrupts : The designated IRQ line for the hashing module.
-- dmas : DMA specifier as per Documentation/devicetree/bindings/dma/dma.txt
-- dma-names : Should be "tx"
-- clocks : Clock specifiers
-- clock-names : "sys" Used to clock the hash block registers
-		"hash" Used to clock data through the accelerator
-
-Example:
-
-	hash: hash@18149600 {
-	compatible = "img,hash-accelerator";
-		reg = <0x18149600 0x100>, <0x18101100 0x4>;
-		interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 8 0xffffffff 0>;
-		dma-names = "tx";
-		clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>;
-		clock-names = "sys", "hash";
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml
new file mode 100644
index 000000000000..b44d36c50ec4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/marvell,orion-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Cryptographic Engines And Security Accelerator
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+description: |
+  Marvell Cryptographic Engines And Security Accelerator
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-370-crypto
+      - marvell,armada-xp-crypto
+      - marvell,armada-375-crypto
+      - marvell,armada-38x-crypto
+      - marvell,dove-crypto
+      - marvell,kirkwood-crypto
+      - marvell,orion-crypto
+
+  reg:
+    minItems: 1
+    items:
+      - description: Registers region
+      - description: SRAM region
+        deprecated: true
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: regs
+      - const: sram
+        deprecated: true
+
+  interrupts:
+    description: One interrupt for each CESA engine
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    description: One or two clocks for each CESA engine
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: cesa0
+      - const: cesa1
+      - const: cesaz0
+      - const: cesaz1
+
+  marvell,crypto-srams:
+    description: Phandle(s) to crypto SRAM.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+
+  marvell,crypto-sram-size:
+    description: SRAM size reserved for crypto operations.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x800
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - marvell,crypto-srams
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - marvell,kirkwood-crypto
+              - marvell,orion-crypto
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-370-crypto
+              - marvell,armada-375-crypto
+              - marvell,armada-38x-crypto
+              - marvell,armada-xp-crypto
+    then:
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-375-crypto
+              - marvell,armada-38x-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@30000 {
+        compatible = "marvell,orion-crypto";
+        reg = <0x30000 0x10000>;
+        reg-names = "regs";
+        interrupts = <22>;
+        marvell,crypto-srams = <&crypto_sram>;
+        marvell,crypto-sram-size = <0x600>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/marvell-cesa.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
deleted file mode 100644
index 28d3f2496b89..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Marvell Cryptographic Engines And Security Accelerator
-
-Required properties:
-- compatible: should be one of the following string
-	      "marvell,orion-crypto"
-	      "marvell,kirkwood-crypto"
-	      "marvell,dove-crypto"
-	      "marvell,armada-370-crypto"
-	      "marvell,armada-xp-crypto"
-	      "marvell,armada-375-crypto"
-	      "marvell,armada-38x-crypto"
-- reg: base physical address of the engine and length of memory mapped
-       region. Can also contain an entry for the SRAM attached to the CESA,
-       but this representation is deprecated and marvell,crypto-srams should
-       be used instead
-- reg-names: "regs". Can contain an "sram" entry, but this representation
-	     is deprecated and marvell,crypto-srams should be used instead
-- interrupts: interrupt number
-- clocks: reference to the crypto engines clocks. This property is not
-	  required for orion and kirkwood platforms
-- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine
-	       id.
-	       This property is not required for the orion and kirkwoord
-	       platforms.
-	       "cesazX" clocks are not required on armada-370 platforms
-- marvell,crypto-srams: phandle to crypto SRAM definitions
-
-Optional properties:
-- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
-			    specified the whole SRAM is used (2KB)
-
-
-Examples:
-
-	crypto@90000 {
-		compatible = "marvell,armada-xp-crypto";
-		reg = <0x90000 0x10000>;
-		reg-names = "regs";
-		interrupts = <48>, <49>;
-		clocks = <&gateclk 23>, <&gateclk 23>;
-		clock-names = "cesa0", "cesa1";
-		marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
-		marvell,crypto-sram-size = <0x600>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
deleted file mode 100644
index 450da3661cad..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek cryptographic accelerators
-
-Required properties:
-- compatible: Should be "mediatek,eip97-crypto"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the five crypto engines interrupts in numeric
-	order. These are global system and four descriptor rings.
-- clocks: the clock used by the core
-- clock-names: Must contain "cryp".
-- power-domains: Must contain a reference to the PM domain.
-
-
-Example:
-	crypto: crypto@1b240000 {
-		compatible = "mediatek,eip97-crypto";
-		reg = <0 0x1b240000 0 0x20000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
-		clock-names = "cryp";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/mv_cesa.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/mv_cesa.txt
deleted file mode 100644
index d9b92e2f3138..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/mv_cesa.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Marvell Cryptographic Engines And Security Accelerator
-
-Required properties:
-- compatible: should be one of the following string
-	      "marvell,orion-crypto"
-	      "marvell,kirkwood-crypto"
-	      "marvell,dove-crypto"
-- reg: base physical address of the engine and length of memory mapped
-       region. Can also contain an entry for the SRAM attached to the CESA,
-       but this representation is deprecated and marvell,crypto-srams should
-       be used instead
-- reg-names: "regs". Can contain an "sram" entry, but this representation
-	     is deprecated and marvell,crypto-srams should be used instead
-- interrupts: interrupt number
-- clocks: reference to the crypto engines clocks. This property is only
-	  required for Dove platforms
-- marvell,crypto-srams: phandle to crypto SRAM definitions
-
-Optional properties:
-- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
-			    specified the whole SRAM is used (2KB)
-
-Examples:
-
-	crypto@30000 {
-		compatible = "marvell,orion-crypto";
-		reg = <0x30000 0x10000>;
-		reg-names = "regs";
-		interrupts = <22>;
-		marvell,crypto-srams = <&crypto_sram>;
-		marvell,crypto-sram-size = <0x600>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
index 3f35122f7873..e009cb712fb8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -45,6 +45,7 @@ properties:
 
       - items:
           - enum:
+              - qcom,qcs615-qce
               - qcom,qcs8300-qce
               - qcom,sa8775p-qce
               - qcom,sc7280-qce
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index e08c24633926..5a99d9b9635e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -128,7 +128,7 @@ required:
   - power-domains
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -180,4 +180,69 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi1: dsi@10860000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10860000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi1_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi1_in: endpoint {
+                    remote-endpoint = <&du_out_dsi1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi1_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 9b5f3f3eab19..e69b6343a8eb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -118,15 +118,11 @@ $defs:
           ti,lvds-vod-swing-clock-microvolt:
             description: LVDS diferential output voltage <min max> for clock
               lanes in microvolts.
-            $ref: /schemas/types.yaml#/definitions/uint32-array
-            minItems: 2
             maxItems: 2
 
           ti,lvds-vod-swing-data-microvolt:
             description: LVDS diferential output voltage <min max> for data
               lanes in microvolts.
-            $ref: /schemas/types.yaml#/definitions/uint32-array
-            minItems: 2
             maxItems: 2
 
 allOf:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/fsl,tcon.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/fsl,tcon.txt
deleted file mode 100644
index 475008747801..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/fsl,tcon.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree bindings for Freescale TCON Driver
-
-Required properties:
-- compatible:		Should be one of
-	* "fsl,vf610-tcon".
-
-- reg:			Address and length of the register set for tcon.
-- clocks:		From common clock binding: handle to tcon ipg clock.
-- clock-names:		From common clock binding: Shall be "ipg".
-
-Examples:
-timing-controller@4003d000 {
-	compatible = "fsl,vf610-tcon";
-	reg = <0x4003d000 0x1000>;
-	clocks = <&clks VF610_CLK_TCON0>;
-	clock-names = "ipg";
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
new file mode 100644
index 000000000000..06bd680524a5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,vf610-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale TCON
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-tcon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    timing-controller@4003d000 {
+        compatible = "fsl,vf610-tcon";
+        reg = <0x4003d000 0x1000>;
+        clocks = <&clks VF610_CLK_TCON0>;
+        clock-names = "ipg";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
new file mode 100644
index 000000000000..92a0a797d099
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX DRM master device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The freescale i.MX DRM master device is a virtual device needed to list all
+  IPU or other display interface nodes that comprise the graphics subsystem.
+
+properties:
+  compatible:
+    const: fsl,imx-display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to camera
+      sensor interface ports of IPU devices.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "fsl,imx-display-subsystem";
+        ports = <&ipu_di0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
new file mode 100644
index 000000000000..bbcfe7e2958b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallel display support
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-parallel-display
+
+  interface-pix-fmt:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - rgb24
+      - rgb565
+      - bgr666
+      - lvds666
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle describing the i2c bus handling the display data channel
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: input port connected to the IPU display interface
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: output port connected to a panel
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display {
+        compatible = "fsl,imx-parallel-display";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interface-pix-fmt = "rgb24";
+
+        port@0 {
+            reg = <0>;
+
+            endpoint {
+                remote-endpoint = <&ipu_di0_disp0>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+
+            endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
new file mode 100644
index 000000000000..ec78645d4de0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IPUv3
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx51-ipu
+          - fsl,imx53-ipu
+          - fsl,imx6q-ipu
+      - items:
+          - const: fsl,imx6qp-ipu
+          - const: fsl,imx6q-ipu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bus
+      - const: di0
+      - const: di1
+
+  resets:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  fsl,prg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to prg node associated with this IPU instance
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI0
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI1
+
+  port@2:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI0
+
+  port@3:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    display-controller@18000000 {
+        compatible = "fsl,imx53-ipu";
+        reg = <0x18000000 0x080000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <11 10>;
+        resets = <&src 2>;
+
+        port@2 {
+            reg = <2>;
+
+            endpoint {
+                remote-endpoint = <&display_in>;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
new file mode 100644
index 000000000000..1646f41d8f72
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LVDS Display Bridge (ldb)
+
+description:
+  The LVDS Display Bridge device tree node contains up to two lvds-channel
+  nodes describing each of the two LVDS encoder channels of the bridge.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx53-ldb
+      - items:
+          - enum:
+              - fsl,imx6q-ldb
+          - const: fsl,imx53-ldb
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle points to the iomuxc-gpr region containing the LVDS
+      control register.
+
+  clocks:
+    minItems: 6
+    maxItems: 8
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di0
+          - const: di1
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di2_sel
+          - const: di3_sel
+          - const: di0
+          - const: di1
+
+  fsl,dual-channel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      if it exists, only LVDS channel 0 should
+      be configured - one input will be distributed on both outputs in dual
+      channel mode
+
+patternProperties:
+  '^lvds-channel@[0-1]$':
+    type: object
+    description:
+      Each LVDS Channel has to contain either an of graph link to a panel device node
+      or a display-timings node that describes the video timings for the connected
+      LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      display-timings:
+        $ref: /schemas/display/panel/display-timings.yaml#
+
+      fsl,data-mapping:
+        enum:
+          - spwg
+          - jeida
+
+      fsl,data-width:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: should be <18> or <24>
+        enum:
+          - 18
+          - 24
+
+      fsl,panel:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to lcd panel
+
+    patternProperties:
+      '^port@[0-4]$':
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+          limitations, only one input port (port@[0,1]) can be used for each channel
+          (lvds-channel@[0,1], respectively).
+          On i.MX6, there should be four input ports (port@[0-3]) that correspond
+          to the four LVDS multiplexer inputs.
+          A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+          to a panel input port. Optionally, the output port can be left out if
+          display-timings are used instead.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - gpr
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    ldb@53fa8008 {
+        compatible = "fsl,imx53-ldb";
+        reg = <0x53fa8008 0x4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpr = <&gpr>;
+        clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+                 <&clks IMX5_CLK_LDB_DI1_SEL>,
+                 <&clks IMX5_CLK_IPU_DI0_SEL>,
+                 <&clks IMX5_CLK_IPU_DI1_SEL>,
+                 <&clks IMX5_CLK_LDB_DI0_GATE>,
+                 <&clks IMX5_CLK_LDB_DI1_GATE>;
+        clock-names = "di0_pll", "di1_pll",
+                      "di0_sel", "di1_sel",
+                      "di0", "di1";
+
+        /* Using an of-graph endpoint link to connect the panel */
+        lvds-channel@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&ipu_di0_lvds0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+               };
+        };
+
+        /* Using display-timings and fsl,data-mapping/width instead */
+        lvds-channel@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                fsl,data-mapping = "spwg";
+                fsl,data-width = <24>;
+
+                display-timings {/* ... */
+                };
+
+                port@1 {
+                     reg = <1>;
+
+                     endpoint {
+                         remote-endpoint = <&ipu_di1_lvds1>;
+                     };
+                };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
new file mode 100644
index 000000000000..73bc73ff6e69
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-pre.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRE (Prefetch Resolve Engine)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-pre
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: axi
+  fsl,iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle pointing to the mmio-sram device node, that should be
+      used for the PRE SRAM double buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pre@21c8000 {
+        compatible = "fsl,imx6qp-pre";
+        reg = <0x021c8000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clks IMX6QDL_CLK_PRE0>;
+        clock-names = "axi";
+        fsl,iram = <&ocram2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
new file mode 100644
index 000000000000..582da8c489f4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-prg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRG (Prefetch Resolve Gasket)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-prg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: axi
+
+  fsl,pres:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      phandles to the PRE units attached to this PRG, with the fixed
+      PRE as the first entry and the muxable PREs following.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    prg@21cc000 {
+        compatible = "fsl,imx6qp-prg";
+        reg = <0x021cc000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_PRG0_APB>, <&clks IMX6QDL_CLK_PRG0_AXI>;
+        clock-names = "ipg", "axi";
+        fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+    };
+
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
deleted file mode 100644
index 269b1ae2fca9..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-Freescale i.MX DRM master device
-================================
-
-The freescale i.MX DRM master device is a virtual device needed to list all
-IPU or other display interface nodes that comprise the graphics subsystem.
-
-Required properties:
-- compatible: Should be "fsl,imx-display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface ports
-  of IPU devices
-
-example:
-
-display-subsystem {
-	compatible = "fsl,imx-display-subsystem";
-	ports = <&ipu_di0>;
-};
-
-
-Freescale i.MX IPUv3
-====================
-
-Required properties:
-- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
-  - imx51
-  - imx53
-  - imx6q
-  - imx6qp
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain sync interrupt and error interrupt,
-  in this order.
-- resets: phandle pointing to the system reset controller and
-          reset line index, see reset/fsl,imx-src.txt for details
-Additional required properties for fsl,imx6qp-ipu:
-- fsl,prg: phandle to prg node associated with this IPU instance
-Optional properties:
-- port@[0-3]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Ports 0 and 1 should correspond to CSI0 and CSI1,
-  ports 2 and 3 should correspond to DI0 and DI1, respectively.
-
-example:
-
-ipu: ipu@18000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ipu";
-	reg = <0x18000000 0x080000000>;
-	interrupts = <11 10>;
-	resets = <&src 2>;
-
-	ipu_di0: port@2 {
-		reg = <2>;
-
-		ipu_di0_disp0: endpoint {
-			remote-endpoint = <&display_in>;
-		};
-	};
-};
-
-Freescale i.MX PRE (Prefetch Resolve Engine)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-pre"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandle to the PRE axi clock input, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "axi"
-- interrupts: should contain the PRE interrupt
-- fsl,iram: phandle pointing to the mmio-sram device node, that should be
-  used for the PRE SRAM double buffer.
-
-example:
-
-pre@21c8000 {
-	compatible = "fsl,imx6qp-pre";
-	reg = <0x021c8000 0x1000>;
-	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clks IMX6QDL_CLK_PRE0>;
-	clock-names = "axi";
-	fsl,iram = <&ocram2>;
-};
-
-Freescale i.MX PRG (Prefetch Resolve Gasket)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-prg"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandles to the PRG ipg and axi clock inputs, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "ipg" and "axi"
-- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
-  PRE as the first entry and the muxable PREs following.
-
-example:
-
-prg@21cc000 {
-	compatible = "fsl,imx6qp-prg";
-	reg = <0x021cc000 0x1000>;
-	clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-		 <&clks IMX6QDL_CLK_PRG0_AXI>;
-	clock-names = "ipg", "axi";
-	fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-};
-
-Parallel display support
-========================
-
-Required properties:
-- compatible: Should be "fsl,imx-parallel-display"
-Optional properties:
-- interface-pix-fmt: How this display is connected to the
-  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
-  and "lvds666".
-- ddc: phandle describing the i2c bus handling the display data
-  channel
-- port@[0-1]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Port 0 is the input port connected to the IPU display interface,
-  port 1 is the output port connected to a panel.
-
-example:
-
-disp0 {
-	compatible = "fsl,imx-parallel-display";
-	interface-pix-fmt = "rgb24";
-
-	port@0 {
-		reg = <0>;
-
-		display_in: endpoint {
-			remote-endpoint = <&ipu_di0_disp0>;
-		};
-	};
-
-	port@1 {
-		reg = <1>;
-
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-panel {
-	...
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/ldb.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/imx/ldb.txt
deleted file mode 100644
index 03653a291b54..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Device-Tree bindings for LVDS Display Bridge (ldb)
-
-LVDS Display Bridge
-===================
-
-The LVDS Display Bridge device tree node contains up to two lvds-channel
-nodes describing each of the two LVDS encoder channels of the bridge.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
-                Both LDB versions are similar, but i.MX6 has an additional
-                multiplexer in the front to select any of the four IPU display
-                interfaces as input for each LVDS channel.
- - gpr : should be <&gpr> on i.MX53 and i.MX6q.
-         The phandle points to the iomuxc-gpr region containing the LVDS
-         control register.
-- clocks, clock-names : phandles to the LDB divider and selector clocks and to
-                        the display interface selector clocks, as described in
-                        Documentation/devicetree/bindings/clock/clock-bindings.txt
-        The following clocks are expected on i.MX53:
-                "di0_pll" - LDB LVDS channel 0 mux
-                "di1_pll" - LDB LVDS channel 1 mux
-                "di0" - LDB LVDS channel 0 gate
-                "di1" - LDB LVDS channel 1 gate
-                "di0_sel" - IPU1 DI0 mux
-                "di1_sel" - IPU1 DI1 mux
-        On i.MX6q the following additional clocks are needed:
-                "di2_sel" - IPU2 DI0 mux
-                "di3_sel" - IPU2 DI1 mux
-        The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-
-Optional properties:
- - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
- - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
-               not used on i.MX6q
- - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
-   be configured - one input will be distributed on both outputs in dual
-   channel mode
-
-LVDS Channel
-============
-
-Each LVDS Channel has to contain either an of graph link to a panel device node
-or a display-timings node that describes the video timings for the connected
-LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
-
-Required properties:
- - reg : should be <0> or <1>
- - port: Input and output port nodes with endpoint definitions as defined in
-   Documentation/devicetree/bindings/graph.txt.
-   On i.MX5, the internal two-input-multiplexer is used. Due to hardware
-   limitations, only one input port (port@[0,1]) can be used for each channel
-   (lvds-channel@[0,1], respectively).
-   On i.MX6, there should be four input ports (port@[0-3]) that correspond
-   to the four LVDS multiplexer inputs.
-   A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
-   to a panel input port. Optionally, the output port can be left out if
-   display-timings are used instead.
-
-Optional properties (required if display-timings are used):
- - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/panel/display-timing.txt.
- - fsl,data-mapping : should be "spwg" or "jeida"
-                      This describes how the color bits are laid out in the
-                      serialized LVDS signal.
- - fsl,data-width : should be <18> or <24>
-
-example:
-
-gpr: iomuxc-gpr@53fa8000 {
-	/* ... */
-};
-
-ldb: ldb@53fa8008 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ldb";
-	gpr = <&gpr>;
-	clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-		 <&clks IMX5_CLK_LDB_DI1_SEL>,
-		 <&clks IMX5_CLK_IPU_DI0_SEL>,
-		 <&clks IMX5_CLK_IPU_DI1_SEL>,
-		 <&clks IMX5_CLK_LDB_DI0_GATE>,
-		 <&clks IMX5_CLK_LDB_DI1_GATE>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel",
-		      "di0", "di1";
-
-	/* Using an of-graph endpoint link to connect the panel */
-	lvds-channel@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu_di0_lvds0>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	/* Using display-timings and fsl,data-mapping/width instead */
-	lvds-channel@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-
-		display-timings {
-			/* ... */
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds1_in: endpoint {
-				remote-endpoint = <&ipu_di1_lvds1>;
-			};
-		};
-	};
-};
-
-panel: lvds-panel {
-	/* ... */
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&lvds0_out>;
-		};
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 5d2089dc596e..daf90ebb39bf 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -25,6 +25,10 @@ properties:
           - mediatek,mt8173-disp-aal
           - mediatek,mt8183-disp-aal
           - mediatek,mt8195-mdp3-aal
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-aal
+          - const: mediatek,mt8195-mdp3-aal
       - items:
           - enum:
               - mediatek,mt2712-disp-aal
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index 6160439ce4d7..5564f4063317 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -27,6 +27,10 @@ properties:
           - mediatek,mt8167-disp-color
           - mediatek,mt8173-disp-color
           - mediatek,mt8195-mdp3-color
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-color
+          - const: mediatek,mt8195-mdp3-color
       - items:
           - enum:
               - mediatek,mt7623-disp-color
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index 0de9f64f3f84..3798a25402d3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -25,6 +25,10 @@ properties:
           - mediatek,mt8173-disp-merge
           - mediatek,mt8195-disp-merge
           - mediatek,mt8195-mdp3-merge
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-merge
+          - const: mediatek,mt8195-mdp3-merge
       - items:
           - const: mediatek,mt6795-disp-merge
           - const: mediatek,mt8173-disp-merge
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
new file mode 100644
index 000000000000..bde4dc556d4f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HDMI MT8195 series HDMI Display Data Channel (DDC)
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - CK Hu <ck.hu@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt8195-hdmi-ddc
+      - items:
+          - const: mediatek,mt8188-hdmi-ddc
+          - const: mediatek,mt8195-hdmi-ddc
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi {
+        hdmi_ddc: i2c {
+            compatible = "mediatek,mt8195-hdmi-ddc";
+            clocks = <&clk26m>;
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
new file mode 100644
index 000000000000..1b382f99d3ce
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 series HDMI-TX Encoder
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - CK Hu <ck.hu@mediatek.com>
+
+description:
+  The MediaTek HDMI-TX v2 encoder can generate HDMI format data based on
+  the HDMI Specification 2.0b.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-hdmi-tx
+      - mediatek,mt8195-hdmi-tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: HDMI Peripheral Bus (APB) clock
+      - description: HDCP and HDMI_TOP clock
+      - description: HDCP, HDMI_TOP and HDMI Audio reference clock
+      - description: VPP HDMI Split clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hdcp
+      - const: hdcp24m
+      - const: hdmi-split
+
+  i2c:
+    type: object
+    $ref: /schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
+    unevaluatedProperties: false
+    description: HDMI DDC I2C controller
+
+  phys:
+    maxItems: 1
+    description: PHY providing clocking TMDS and pixel to controller
+
+  phy-names:
+    items:
+      - const: hdmi
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port, usually connected to the output port of a DPI
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port that must be connected either to the input port of
+          a HDMI connector node containing a ddc-i2c-bus, or to the input
+          port of an attached bridge chip, such as a SlimPort transmitter.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - phys
+  - phy-names
+  - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hdmi@1c300000 {
+            compatible = "mediatek,mt8195-hdmi-tx";
+            reg = <0 0x1c300000 0 0x1000>;
+            clocks = <&topckgen CLK_TOP_HDMI_APB>,
+                     <&topckgen CLK_TOP_HDCP>,
+                     <&topckgen CLK_TOP_HDCP_24M>,
+                     <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+            clock-names = "bus", "hdcp", "hdcp24m", "hdmi-split";
+            interrupts = <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>;
+            phys = <&hdmi_phy>;
+            phy-names = "hdmi";
+            power-domains = <&spm MT8195_POWER_DOMAIN_HDMI_TX>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&hdmi_pins>;
+            #sound-dai-cells = <1>;
+
+            hdmitx_ddc: i2c {
+                compatible = "mediatek,mt8195-hdmi-ddc";
+                clocks = <&clk26m>;
+            };
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    hdmi_in: endpoint {
+                        remote-endpoint = <&dpi1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    hdmi_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
index be07bbdc54e3..86787866ced0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -20,9 +20,13 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8188-disp-padding
-      - mediatek,mt8195-mdp3-padding
+    oneOf:
+      - enum:
+          - mediatek,mt8188-disp-padding
+          - mediatek,mt8195-mdp3-padding
+      - items:
+          - const: mediatek,mt8188-mdp3-padding
+          - const: mediatek,mt8195-mdp3-padding
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index e00b88332f2f..246bbb509bea 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -31,6 +31,7 @@ properties:
           - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sar2130p-dp
               - qcom,sm6350-dp
               - qcom,sm8150-dp
               - qcom,sm8250-dp
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 2aab33cd0017..82fe95a6d959 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -23,6 +23,8 @@ properties:
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
@@ -314,6 +316,8 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 321470435e65..3c75ff42999a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -17,6 +17,8 @@ properties:
     enum:
       - qcom,dsi-phy-7nm
       - qcom,dsi-phy-7nm-8150
+      - qcom,sa8775p-dsi-phy-5nm
+      - qcom,sar2130p-dsi-phy-5nm
       - qcom,sc7280-dsi-phy-7nm
       - qcom,sm6375-dsi-phy-7nm
       - qcom,sm8350-dsi-phy-5nm
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/hdmi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/hdmi.yaml
index d4a2033afea8..dfec6c3480f3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/hdmi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -66,21 +66,6 @@ properties:
     maxItems: 1
     description: hpd pin
 
-  qcom,hdmi-tx-mux-en-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux enable pin
-
-  qcom,hdmi-tx-mux-sel-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux select pin
-
-  qcom,hdmi-tx-mux-lpm-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux lpm pin
-
   '#sound-dai-cells':
     const: 1
 
@@ -89,12 +74,12 @@ properties:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/mdp4.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/mdp4.yaml
index 35204a287579..03ee09faa335 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/mdp4.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -18,9 +18,10 @@ properties:
 
   clocks:
     minItems: 6
-    maxItems: 6
+    maxItems: 8
 
   clock-names:
+    minItems: 6
     items:
       - const: core_clk
       - const: iface_clk
@@ -28,6 +29,12 @@ properties:
       - const: lut_clk
       - const: hdmi_clk
       - const: tv_clk
+      - const: lcdc_clk
+      - const: pxo
+        description: XO used to drive the internal LVDS PLL
+
+  '#clock-cells':
+    const: 0
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 7c6462caa442..db9c43b20e2a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -84,6 +84,18 @@ properties:
     items:
       - description: MDSS_CORE reset
 
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
index 5fac3e266703..1053b3bc4908 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -52,12 +52,23 @@ patternProperties:
         items:
           - const: qcom,sa8775p-dp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sa8775p-dsi-ctrl
+
   "^phy@[0-9a-f]+$":
     type: object
     additionalProperties: true
     properties:
       compatible:
-        const: qcom,sa8775p-edp-phy
+        contains:
+          enum:
+            - qcom,sa8775p-dsi-phy-5nm
+            - qcom,sa8775p-edp-phy
 
 required:
   - compatible
@@ -139,6 +150,20 @@ examples:
                         remote-endpoint = <&mdss0_dp0_in>;
                     };
                 };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
             };
 
             mdss0_mdp_opp_table: opp-table {
@@ -186,6 +211,160 @@ examples:
             vdda-pll-supply = <&vreg_l4a>;
         };
 
+        dsi@ae94000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi0_phy 0>, <&mdss0_dsi0_phy 1>;
+            phys = <&mdss0_dsi0_phy>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi0_out: endpoint { };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi1_phy 0>, <&mdss0_dsi1_phy 1>;
+            phys = <&mdss0_dsi1_phy>;
+
+            operating-points-v2 = <&dsi1_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi1_out: endpoint { };
+                };
+            };
+
+            dsi1_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
         displayport-controller@af54000 {
             compatible = "qcom,sa8775p-dp";
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
new file mode 100644
index 000000000000..870144b53cec
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
@@ -0,0 +1,439 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sar2130p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SAR2130P Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <lumag@kernel.org>
+
+description:
+  SAR2310P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sar2130p-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sar2130p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sar2130p-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sar2130p-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sar2130p-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sar2130p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc_master_mdp &mc_virt_slave_ebi1>,
+                        <&gem_noc_master_appss_proc &config_noc_slave_display_cfg>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        resets = <&dispcc_disp_cc_mdss_core_bcr>;
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                 <&gcc_gcc_disp_ahb_clk>,
+                 <&gcc_gcc_disp_hf_axi_clk>,
+                 <&dispcc_disp_cc_mdss_mdp_clk>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sar2130p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_gcc_disp_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_lut_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_clk>,
+                     <&dispcc_disp_cc_mdss_vsync_clk>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&mdss_dp0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sar2130p-dp",
+                         "qcom,sm8350-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_aux_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_intf_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_pixel0_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_disp_cc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_dp_qmpphy_QMP_USB43DP_DP_LINK_CLK>,
+                                     <&usb_dp_qmpphy_QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dp0_out: endpoint {
+                        remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+                    };
+                };
+        };
+
+        dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-162000000 {
+                    opp-hz = /bits/ 64 <162000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte0_clk>,
+                     <&dispcc_disp_cc_mdss_byte0_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk0_clk>,
+                     <&dispcc_disp_cc_mdss_esc0_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte0_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte1_clk>,
+                     <&dispcc_disp_cc_mdss_byte1_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk1_clk>,
+                     <&dispcc_disp_cc_mdss_esc1_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte1_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk1_clk_src>;
+            assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae97000 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
index 6902795b4e2c..df9ec15ad6c3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -17,6 +17,7 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 properties:
   compatible:
     enum:
+      - qcom,sar2130p-dpu
       - qcom,sc7280-dpu
       - qcom,sc8280xp-dpu
       - qcom,sm8350-dpu
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index 163fc83c1e80..68176de854b3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -38,12 +38,16 @@ properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from the MDP0 port to the data bus
+      - description: Interconnect path from the MDP1 port to the data bus
+      - description: Interconnect path from the CPU to the reg bus
 
   interconnect-names:
     items:
       - const: mdp0-mem
       - const: mdp1-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -88,6 +92,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
     #include <dt-bindings/power/qcom,rpmhpd.h>
 
@@ -97,8 +102,10 @@ examples:
         reg-names = "mdss";
 
         interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
-                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
-        interconnect-names = "mdp0-mem", "mdp1-mem";
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
 
         power-domains = <&dispcc MDSS_GDSC>;
         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml
new file mode 100644
index 000000000000..c6bff0ece360
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,td4320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TD4320 MIPI-DSI panels
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description:
+  BOE TD4320 6.3" 1080x2340 panel found in Xiaomi Redmi Note 7 smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,td4320
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "boe,td4320";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml
new file mode 100644
index 000000000000..f619aea82bdf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8279.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8279/HX8279-D based MIPI-DSI panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Himax HX8279 is a 1803 channel outputs source driver with MIPI
+  TCON, which generates the horizontal and vertical control timing to
+  the source and gate drivers.
+  This DriverIC is most suitable for 1200x1920, 1080x1920, 1200x1600,
+  and 600x1024 panels and outputs full RGB888 over two or four lanes,
+  single or dual, MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aoly,sl101pm1794fog-v15
+          - startek,kd070fhfid078
+      - const: himax,hx8279
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  vdd-supply:
+    description: Panel power supply
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - reset-gpios
+  - iovcc-supply
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "startek,kd070fhfid078", "himax,hx8279";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            iovcc-supply = <&vreg_lcm_vio>;
+            vdd-supply = <&vreg_lcm_vdd>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
index e2a2dd4ef5fa..5fcea62fd58f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -23,6 +23,7 @@ properties:
     maxItems: 1
 
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index af9e0ea0e72f..b0e2c82232d3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -22,6 +22,7 @@ properties:
     maxItems: 1
 
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
index bbaaa783d184..2219d3d4ac43 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LG SW43408 1080x2160 DSI panel
 
 maintainers:
-  - Caleb Connolly <caleb.connolly@linaro.org>
+  - Casey Connolly <casey.connolly@linaro.org>
 
 description:
   This panel is used on the Pixel 3, it is a 60hz OLED panel which
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
new file mode 100644
index 000000000000..1b38c1d0af68
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt37801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT37801 AMOLED DSI Panel
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Naming is inconclusive and different sources claim this is either Novatek
+  NT37801 or NT37810 AMOLED DSI Panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt37801
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vci-supply: true
+  vdd-supply: true
+  vddio-supply: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vdd-supply
+  - vddio-supply
+  - port
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "novatek,nt37801";
+            reg = <0>;
+
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vreg_l12b_1p8>;
+
+            reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index b0de4fd6f3d4..5542c9229d54 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -226,6 +226,8 @@ properties:
       - netron-dy,e231732
         # Newhaven Display International 480 x 272 TFT LCD panel
       - newhaven,nhd-4.3-480272ef-atxl
+        # NLT Technologies, Ltd. 15.6" WXGA (1366×768) LVDS TFT LCD panel
+      - nlt,nl13676bc25-03f
         # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
       - nvd,9128
         # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
@@ -246,6 +248,8 @@ properties:
       - osddisplays,osd070t1718-19ts
         # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2045-53ts
+        # POWERTIP PH128800T004-ZZA01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t004-zza01
         # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel
       - powertip,ph128800t006-zhc01
         # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
@@ -284,6 +288,8 @@ properties:
       - startek,kd070wvfpa
         # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
       - team-source-display,tst043015cmhx
+        # Tianma Micro-electronics P0700WXF1MBAA 7.0" WXGA (1280x800) LVDS TFT LCD panel
+      - tianma,p0700wxf1mbaa
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
       - tianma,tm070jdhg30
         # Tianma Micro-electronics TM070JDHG34-00 7.0" WXGA (1280x800) LVDS TFT LCD panel
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
index 684c2896d238..31f0c0f038e4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
@@ -19,6 +19,8 @@ properties:
       - const: samsung,atna33xc20
       - items:
           - enum:
+              # Samsung 14" WQXGA+ (2880×1800 pixels) eDP AMOLED panel
+              - samsung,atna40yk20
               # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
               - samsung,atna45af01
               # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
new file mode 100644
index 000000000000..36be09c900f2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/truly,nt35597-2K-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Truly NT35597 DSI 2K display
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Truly NT35597 DSI 2K display is used on the Qualcomm SDM845 MTP board.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: truly,nt35597-2K-display
+
+  reg:
+    maxItems: 1
+
+  vdda-supply:
+    description: regulator that provides the supply voltage Power IC supply
+
+  vdispp-supply:
+    description: regulator that provides the supply voltage for positive LCD bias
+
+  vdispn-supply:
+    description: regulator that provides the supply voltage for negative LCD bias
+
+  reset-gpios: true
+
+  mode-gpios:
+    description:
+      Gpio for choosing the mode of the display for single DSI or Dual DSI.
+      This should be low for dual DSI and high for single DSI mode.
+
+  ports:
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdda-supply
+  - reset-gpios
+  - mode-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "truly,nt35597-2K-display";
+            reg = <0>;
+
+            vdda-supply = <&pm8998_l14>;
+            vdispp-supply = <&lab_regulator>;
+            vdispn-supply = <&ibb_regulator>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+            mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    panel0_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    panel1_in: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
new file mode 100644
index 000000000000..49dcd9b8f670
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,g2647fb105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox G2647FB105 6.47" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Alexander Baransky <sanyapilot496@gmail.com>
+
+description:
+  The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode OLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,g2647fb105
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,g2647fb105";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l7c_3p0>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
deleted file mode 100644
index 8df7d2e393d6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Rockchip RK3399 specific extensions to the cdn Display Port
-================================
-
-Required properties:
-- compatible: must be "rockchip,rk3399-cdn-dp"
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "core-clk" "pclk" "spdif" "grf"
-
-- resets : a list of phandle + reset specifier pairs
-- reset-names : string of reset names
-		Required elements: "apb", "core", "dptx", "spdif"
-- power-domains : power-domain property defined with a phandle
-		  to respective power domain.
-- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
-- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: contain a port nodes with endpoint definitions as defined in
-	 Documentation/devicetree/bindings/media/video-interfaces.txt.
-	 contained 2 endpoints, connecting to the output of vop.
-
-- phys: from general PHY binding: the phandle for the PHY device.
-
-- extcon: extcon specifier for the Power Delivery
-
-- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
-
--------------------------------------------------------------------------------
-
-Example:
-	cdn_dp: dp@fec00000 {
-		compatible = "rockchip,rk3399-cdn-dp";
-		reg = <0x0 0xfec00000 0x0 0x100000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
-			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
-		clock-names = "core-clk", "pclk", "spdif", "grf";
-		assigned-clocks = <&cru SCLK_DP_CORE>;
-		assigned-clock-rates = <100000000>;
-		power-domains = <&power RK3399_PD_HDCP>;
-		phys = <&tcphy0_dp>, <&tcphy1_dp>;
-		resets = <&cru SRST_DPTX_SPDIF_REC>;
-		reset-names = "spdif";
-		extcon = <&fusb0>, <&fusb1>;
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#sound-dai-cells = <1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dp_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_dp>;
-				};
-
-				dp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_dp>;
-				};
-			};
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
index 60dedf9b2be7..d99b23b88cc5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -15,6 +15,7 @@ properties:
     enum:
       - rockchip,rk3288-dp
       - rockchip,rk3399-edp
+      - rockchip,rk3588-edp
 
   clocks:
     minItems: 2
@@ -31,16 +32,23 @@ properties:
     maxItems: 1
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reset-names:
-    const: dp
+    minItems: 1
+    items:
+      - const: dp
+      - const: apb
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       This SoC makes use of GRF regs.
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
 required:
   - compatible
   - clocks
@@ -52,6 +60,19 @@ required:
 allOf:
   - $ref: /schemas/display/bridge/analogix,dp.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-edp
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
index 5b87b0f1963e..290376bec079 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -23,13 +23,11 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 1
     items:
       - description: The HDMI controller main clock
       - description: The HDMI PHY reference clock
 
   clock-names:
-    minItems: 1
     items:
       - const: pclk
       - const: ref
@@ -58,6 +56,12 @@ properties:
       - port@0
       - port@1
 
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF used for control the polarity of hsync/vsync of rk3036
+      HDMI.
+
 required:
   - compatible
   - reg
@@ -77,6 +81,8 @@ allOf:
             const: rockchip,rk3036-inno-hdmi
 
     then:
+      required:
+        - rockchip,grf
       properties:
         power-domains: false
 
@@ -87,11 +93,6 @@ allOf:
             const: rockchip,rk3128-inno-hdmi
 
     then:
-      properties:
-        clocks:
-          minItems: 2
-        clock-names:
-          minItems: 2
       required:
         - power-domains
 
@@ -106,10 +107,11 @@ examples:
       compatible = "rockchip,rk3036-inno-hdmi";
       reg = <0x20034000 0x4000>;
       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-      clocks = <&cru  PCLK_HDMI>;
-      clock-names = "pclk";
+      clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+      clock-names = "pclk", "ref";
       pinctrl-names = "default";
       pinctrl-0 = <&hdmi_ctl>;
+      rockchip,grf = <&grf>;
       #sound-dai-cells = <0>;
 
       ports {
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml
new file mode 100644
index 000000000000..1a33128e77f5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3399-cdn-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 specific extensions to the CDN Display Port
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chip.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Sandy Huang <hjc@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3399-cdn-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DP core work clock
+      - description: APB clock
+      - description: SPDIF interface clock
+      - description: GRF clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: pclk
+      - const: spdif
+      - const: grf
+
+  extcon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: Extcon device providing the cable state for DP PHY device 0
+      - description: Extcon device providing the cable state for DP PHY device 1
+    description:
+      List of phandle to the extcon device providing the cable state for the DP PHY.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: DP output to the DP PHY device 0
+      - description: DP output to the DP PHY device 1
+    description:
+      RK3399 have two DP-USB PHY, specifying one PHY which want to use, or
+      specify two PHYs here to let the driver determine which PHY to use.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the CDN DP
+
+        properties:
+          endpoint@0:
+            description: Connection to the VOPB
+
+          endpoint@1:
+            description: Connection to the VOPL
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the CDN DP
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: spdif
+      - const: dptx
+      - const: apb
+      - const: core
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF register to control HPD.
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - ports
+  - resets
+  - reset-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dp@fec00000 {
+            compatible = "rockchip,rk3399-cdn-dp";
+            reg = <0x0 0xfec00000 0x0 0x100000>;
+            assigned-clocks = <&cru SCLK_DP_CORE>;
+            assigned-clock-rates = <100000000>;
+            interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, <&cru SCLK_SPDIF_REC_DPTX>,
+                    <&cru PCLK_VIO_GRF>;
+            clock-names = "core-clk", "pclk", "spdif", "grf";
+            power-domains = <&power RK3399_PD_HDCP>;
+            phys = <&tcphy0_dp>, <&tcphy1_dp>;
+            resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+                    <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+            reset-names = "spdif", "dptx", "apb", "core";
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <1>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dp_in: port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dp_in_vopb: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&vopb_out_dp>;
+                    };
+
+                    dp_in_vopl: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&vopl_out_dp>;
+                    };
+                };
+
+                dp_out: port@1 {
+                    reg = <1>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index b339b7e708c6..8b5f58103dda 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -73,12 +73,6 @@ properties:
   port:
     $ref: /schemas/graph.yaml#/properties/port
 
-  assigned-clocks:
-    maxItems: 2
-
-  assigned-clock-rates:
-    maxItems: 2
-
   iommus:
     maxItems: 1
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/sitronix,st7571.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
new file mode 100644
index 000000000000..4fea782fccd7
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7571.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7571 Display Controller
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description:
+  Sitronix ST7571 is a driver and controller for 4-level gray
+  scale and monochrome dot matrix LCD panels.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    const: sitronix,st7571
+
+  reg:
+    maxItems: 1
+
+  sitronix,grayscale:
+    type: boolean
+    description:
+      Display supports 4-level grayscale.
+
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - width-mm
+  - height-mm
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      display@3f {
+        compatible = "sitronix,st7571";
+        reg = <0x3f>;
+        reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        width-mm = <37>;
+        height-mm = <27>;
+
+        panel-timing {
+          hactive = <128>;
+          vactive = <96>;
+          hback-porch = <0>;
+          vback-porch = <0>;
+          clock-frequency = <0>;
+          hfront-porch = <0>;
+          hsync-len = <0>;
+          vfront-porch = <0>;
+          vsync-len = <0>;
+        };
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/truly,nt35597.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/display/truly,nt35597.txt
deleted file mode 100644
index f39c77ee36ea..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/display/truly,nt35597.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Truly model NT35597 DSI display driver
-
-The Truly NT35597 is a generic display driver, currently only configured
-for use in the 2K display on the Qualcomm SDM845 MTP board.
-
-Required properties:
-- compatible: should be "truly,nt35597-2K-display"
-- vdda-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply
-- vdispp-supply: phandle of the regulator that provides the supply voltage
-  for positive LCD bias
-- vdispn-supply: phandle of the regulator that provides the supply voltage
-  for negative LCD bias
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  (active low)
-- mode-gpios: phandle of the gpio for choosing the mode of the display
-  for single DSI or Dual DSI
-  This should be low for dual DSI and high for single DSI mode
-- ports: This device has two video ports driven by two DSIs. Their connections
-  are modeled using the OF graph bindings specified in
-  Documentation/devicetree/bindings/graph.txt.
-  - port@0: DSI input port driven by master DSI
-  - port@1: DSI input port driven by secondary DSI
-
-Example:
-
-	dsi@ae94000 {
-		panel@0 {
-			compatible = "truly,nt35597-2K-display";
-			reg = <0>;
-			vdda-supply = <&pm8998_l14>;
-			vdispp-supply = <&lab_regulator>;
-			vdispn-supply = <&ibb_regulator>;
-			pinctrl-names = "default", "suspend";
-			pinctrl-0 = <&dpu_dsi_active>;
-			pinctrl-1 = <&dpu_dsi_suspend>;
-
-			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					panel0_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					panel1_in: endpoint {
-						remote-endpoint = <&dsi1_out>;
-					};
-				};
-			};
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/arm,dma-350.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
new file mode 100644
index 000000000000..429f682f15d8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,dma-350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreLink DMA-350 Controller
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,dma-350
+
+  reg:
+    items:
+      - description: Base and size of the full register map
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Channel 0 interrupt
+      - description: Channel 1 interrupt
+      - description: Channel 2 interrupt
+      - description: Channel 3 interrupt
+      - description: Channel 4 interrupt
+      - description: Channel 5 interrupt
+      - description: Channel 6 interrupt
+      - description: Channel 7 interrupt
+
+  "#dma-cells":
+    const: 1
+    description: The cell is the trigger input number
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 950e8fa4f4ab..fa4248e2f1b9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -48,11 +48,11 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 64
+    maxItems: 65
 
   interrupt-names:
     minItems: 1
-    maxItems: 64
+    maxItems: 65
 
   "#dma-cells":
     description: |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
deleted file mode 100644
index 447fb44e7abe..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* NVIDIA Tegra APB DMA controller
-
-Required properties:
-- compatible: Should be "nvidia,<chip>-apbdma"
-- reg: Should contain DMA registers location and length. This should include
-  all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - dma
-- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
-  client nodes' dmas properties. The specifier represents the DMA request
-  select value for the peripheral. For more details, consult the Tegra TRM's
-  documentation of the APB DMA channel control register REQ_SEL field.
-
-Examples:
-
-apbdma: dma@6000a000 {
-	compatible = "nvidia,tegra20-apbdma";
-	reg = <0x6000a000 0x1200>;
-	interrupts = < 0 136 0x04
-		       0 137 0x04
-		       0 138 0x04
-		       0 139 0x04
-		       0 140 0x04
-		       0 141 0x04
-		       0 142 0x04
-		       0 143 0x04
-		       0 144 0x04
-		       0 145 0x04
-		       0 146 0x04
-		       0 147 0x04
-		       0 148 0x04
-		       0 149 0x04
-		       0 150 0x04
-		       0 151 0x04 >;
-	clocks = <&tegra_car 34>;
-	resets = <&tegra_car 34>;
-	reset-names = "dma";
-	#dma-cells = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml
new file mode 100644
index 000000000000..a2ffd5209b3b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra20-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APB DMA Controller
+
+description:
+  The NVIDIA Tegra APB DMA controller is a hardware component that
+  enables direct memory access (DMA) on Tegra systems. It facilitates
+  data transfer between I/O devices and main memory without constant
+  CPU intervention.
+
+maintainers:
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-apbdma
+      - items:
+          - const: nvidia,tegra30-apbdma
+          - const: nvidia,tegra20-apbdma
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dma
+
+required:
+  - compatible
+  - reg
+  - "#dma-cells"
+  - clocks
+  - interrupts
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+    dma-controller@6000a000 {
+        compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+        reg = <0x6000a000 0x1200>;
+        interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 34>;
+        resets = <&tegra_car 34>;
+        reset-names = "dma";
+        #dma-cells = <1>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
index d3f8c269916c..da0235e451d6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - nvidia,tegra210-adma
           - nvidia,tegra186-adma
+          - nvidia,tegra264-adma
       - items:
           - enum:
               - nvidia,tegra234-adma
@@ -92,6 +93,7 @@ allOf:
           contains:
             enum:
               - nvidia,tegra186-adma
+              - nvidia,tegra264-adma
     then:
       anyOf:
         - properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
index 3ad0d9b1fbc5..f2f87f0f545b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -42,6 +42,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  dma-coherent: true
+
   iommus:
     minItems: 1
     maxItems: 6
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
index b356251de5a8..92b12762c472 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -11,19 +11,23 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r7s72100-dmac # RZ/A1H
-          - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
-          - renesas,r9a07g044-dmac # RZ/G2{L,LC}
-          - renesas,r9a07g054-dmac # RZ/V2L
-          - renesas,r9a08g045-dmac # RZ/G3S
-      - const: renesas,rz-dmac
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r7s72100-dmac # RZ/A1H
+              - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+              - renesas,r9a07g054-dmac # RZ/V2L
+              - renesas,r9a08g045-dmac # RZ/G3S
+          - const: renesas,rz-dmac
+
+      - const: renesas,r9a09g057-dmac # RZ/V2H(P)
 
   reg:
     items:
       - description: Control and channel register block
       - description: DMA extended resource selector block
+    minItems: 1
 
   interrupts:
     maxItems: 17
@@ -52,6 +56,7 @@ properties:
     items:
       - description: DMA main clock
       - description: DMA register access clock
+    minItems: 1
 
   clock-names:
     items:
@@ -61,10 +66,10 @@ properties:
   '#dma-cells':
     const: 1
     description:
-      The cell specifies the encoded MID/RID values of the DMAC port
-      connected to the DMA client and the slave channel configuration
-      parameters.
-      bits[0:9] - Specifies MID/RID value
+      The cell specifies the encoded MID/RID or the REQ No values of
+      the DMAC port connected to the DMA client and the slave channel
+      configuration parameters.
+      bits[0:9] - Specifies the MID/RID or the REQ No value
       bit[10] - Specifies DMA request high enable (HIEN)
       bit[11] - Specifies DMA request detection type (LVL)
       bits[12:14] - Specifies DMAACK output mode (AM)
@@ -80,12 +85,26 @@ properties:
     items:
       - description: Reset for DMA ARESETN reset terminal
       - description: Reset for DMA RST_ASYNC reset terminal
+    minItems: 1
 
   reset-names:
     items:
       - const: arst
       - const: rst_async
 
+  renesas,icu:
+    description:
+      It must contain the phandle to the ICU and the index of the DMAC as seen
+      from the ICU.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the ICU node.
+          - description:
+              The number of the DMAC as seen from the ICU, i.e. parameter k from
+              register ICU_DMkSELy. This may differ from the actual DMAC instance
+              number.
+
 required:
   - compatible
   - reg
@@ -98,13 +117,25 @@ allOf:
   - $ref: dma-controller.yaml#
 
   - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - renesas,r7s72100-dmac
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043-dmac
+              - renesas,r9a07g044-dmac
+              - renesas,r9a07g054-dmac
+              - renesas,r9a08g045-dmac
     then:
+      properties:
+        reg:
+          minItems: 2
+        clocks:
+          minItems: 2
+        resets:
+          minItems: 2
+
+        renesas,icu: false
+
       required:
         - clocks
         - clock-names
@@ -112,6 +143,46 @@ allOf:
         - resets
         - reset-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r7s72100-dmac
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+        clocks: false
+        clock-names: false
+        power-domains: false
+        resets: false
+        reset-names: false
+        renesas,icu: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-dmac
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          maxItems: 1
+        resets:
+          maxItems: 1
+
+        clock-names: false
+        reset-names: false
+
+      required:
+        - clocks
+        - power-domains
+        - renesas,icu
+        - resets
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/example-schema.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/example-schema.yaml
index 484f8babcda4..c731d5045e80 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/example-schema.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/example-schema.yaml
@@ -178,7 +178,9 @@ properties:
     description: Child nodes are just another property from a json-schema
       perspective.
     type: object  # DT nodes are json objects
-    # Child nodes also need additionalProperties or unevaluatedProperties
+    # Child nodes also need additionalProperties or unevaluatedProperties, where
+    # 'false' should be used in most cases (see 'child-node-with-own-schema'
+    # below).
     additionalProperties: false
     properties:
       vendor,a-child-node-property:
@@ -189,6 +191,17 @@ properties:
     required:
       - vendor,a-child-node-property
 
+  child-node-with-own-schema:
+    description: |
+      Child node with their own compatible and device schema which ends in
+      'additionalProperties: false' or 'unevaluatedProperties: false' can
+      mention only the compatible and use here 'additionalProperties: true'.
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: vendor,sub-device
+
 # Describe the relationship between different properties
 dependencies:
   # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index 2cdad1bbae73..9785aac3b5f3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -27,6 +27,15 @@ properties:
   mboxes:
     maxItems: 1
 
+  pmic:
+    description: Child node describing the main PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
   shmem:
     description:
       List of phandle pointing to the shared memory (SHM) area. The memory
@@ -43,8 +52,34 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     power-management {
         compatible = "google,gs101-acpm-ipc";
         mboxes = <&ap2apm_mailbox>;
         shmem = <&apm_sram>;
+
+        pmic {
+            compatible = "samsung,s2mpg10-pmic";
+            interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <450000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
deleted file mode 100644
index 6eff1afd8daf..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Intel Service Layer Driver for Stratix10 SoC
-============================================
-Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
-processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
-configured from HPS, there needs to be a way for HPS to notify SDM the
-location and size of the configuration data. Then SDM will get the
-configuration data from that location and perform the FPGA configuration.
-
-To meet the whole system security needs and support virtual machine requesting
-communication with SDM, only the secure world of software (EL3, Exception
-Layer 3) can interface with SDM. All software entities running on other
-exception layers must channel through the EL3 software whenever it needs
-service from SDM.
-
-Intel Stratix10 service layer driver, running at privileged exception level
-(EL1, Exception Layer 1), interfaces with the service providers and provides
-the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
-driver also manages secure monitor call (SMC) to communicate with secure monitor
-code running in EL3.
-
-Required properties:
--------------------
-The svc node has the following mandatory properties, must be located under
-the firmware node.
-
-- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
-- method: smc or hvc
-        smc - Secure Monitor Call
-        hvc - Hypervisor Call
-- memory-region:
-	phandle to the reserved memory node. See
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-	for details
-
-Example:
--------
-
-	reserved-memory {
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges;
-
-                service_reserved: svcbuffer@0 {
-                        compatible = "shared-dma-pool";
-                        reg = <0x0 0x0 0x0 0x1000000>;
-                        alignment = <0x1000>;
-                        no-map;
-                };
-        };
-
-	firmware {
-		svc {
-			compatible = "intel,stratix10-svc";
-			method = "smc";
-			memory-region = <&service_reserved>;
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
new file mode 100644
index 000000000000..fac1e955852e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/intel,stratix10-svc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Service Layer Driver for Stratix10 SoC
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+  - Mahesh Rao <mahesh.rao@altera.com>
+
+description: >
+  Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+  processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
+  configured from HPS, there needs to be a way for HPS to notify SDM the
+  location and size of the configuration data. Then SDM will get the
+  configuration data from that location and perform the FPGA configuration.
+
+  To meet the whole system security needs and support virtual machine requesting
+  communication with SDM, only the secure world of software (EL3, Exception
+  Layer 3) can interface with SDM. All software entities running on other
+  exception layers must channel through the EL3 software whenever it needs
+  service from SDM.
+
+  Intel Stratix10 service layer driver, running at privileged exception level
+  (EL1, Exception Layer 1), interfaces with the service providers and provides
+  the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
+  driver also manages secure monitor call (SMC) to communicate with secure monitor
+  code running in EL3.
+
+properties:
+  compatible:
+    enum:
+      - intel,stratix10-svc
+      - intel,agilex-svc
+
+  method:
+    description: |
+      Supervisory call method to be used to communicate with the
+      secure service layer.
+      Permitted values are:
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      - hvc
+
+  memory-region:
+    maxItems: 1
+    description:
+      reserved memory region for the service layer driver to
+      communicate with the secure device manager.
+
+  fpga-mgr:
+    $ref: /schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml
+    description: Optional child node for fpga manager to perform fabric configuration.
+
+required:
+  - compatible
+  - method
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved-memory {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      service_reserved: svcbuffer@0 {
+              compatible = "shared-dma-pool";
+              reg = <0x0 0x0 0x0 0x1000000>;
+              alignment = <0x1000>;
+              no-map;
+      };
+    };
+
+    firmware {
+      svc {
+        compatible = "intel,stratix10-svc";
+        method = "smc";
+        memory-region = <&service_reserved>;
+
+        fpga-mgr {
+          compatible = "intel,stratix10-soc-fpga-mgr";
+        };
+      };
+    };
+
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
index 1a95010a546b..2bda2e0e1369 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
@@ -11,6 +11,18 @@ maintainers:
   - Peng Fan <peng.fan@nxp.com>
 
 properties:
+  protocol@80:
+    description:
+      SCMI LMM protocol which is for boot, shutdown, and reset of other logical
+      machines (LM). It is usually used to allow one LM to manage another used
+      as an offload or accelerator engine.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x80
+
   protocol@81:
     $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
     unevaluatedProperties: false
@@ -19,6 +31,17 @@ properties:
       reg:
         const: 0x81
 
+  protocol@82:
+    description:
+      SCMI CPU Protocol which allows an agent to start or stop a CPU. It is
+      used to manage auxiliary CPUs in a LM.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x82
+
   protocol@84:
     $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
     unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml
new file mode 100644
index 000000000000..6e536d6b28a9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Stratix10 SoC FPGA Manager
+
+maintainers:
+  - Mahesh Rao <mahesh.rao@altera.com>
+  - Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
+  - Niravkumar L Rabara <nirav.rabara@altera.com>
+
+description:
+  The Intel Stratix10 SoC consists of a 64-bit quad-core ARM Cortex A53 hard
+  processor system (HPS) and a Secure Device Manager (SDM). The Stratix10
+  SoC FPGA Manager driver is used to configure/reconfigure the FPGA fabric
+  on the die.The driver communicates with SDM/ATF via the stratix10-svc
+  platform driver for performing its operations.
+
+properties:
+  compatible:
+    enum:
+      - intel,stratix10-soc-fpga-mgr
+      - intel,agilex-soc-fpga-mgr
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga-mgr {
+      compatible = "intel,stratix10-soc-fpga-mgr";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
deleted file mode 100644
index 0f874137ca46..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Intel Stratix10 SoC FPGA Manager
-
-Required properties:
-The fpga_mgr node has the following mandatory property, must be located under
-firmware/svc node.
-
-- compatible : should contain "intel,stratix10-soc-fpga-mgr" or
-	       "intel,agilex-soc-fpga-mgr"
-
-Example:
-
-	firmware {
-		svc {
-			fpga_mgr: fpga-mgr {
-				compatible = "intel,stratix10-soc-fpga-mgr";
-			};
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml
index 3dd70933ed8e..d810043b56b6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml
@@ -69,13 +69,13 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     gpio@fffff400 {
-            compatible = "atmel,at91rm9200-gpio";
-            reg = <0xfffff400 0x200>;
-            interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-            #gpio-cells = <2>;
-            gpio-controller;
-            interrupt-controller;
-            #interrupt-cells = <2>;
-            clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+        compatible = "atmel,at91rm9200-gpio";
+        reg = <0xfffff400 0x200>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
     };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml
new file mode 100644
index 000000000000..a05f6ea619c3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/blaize,blzp1600-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Blaize BLZP1600 GPIO controller
+
+description:
+  Blaize BLZP1600 GPIO controller is an implementation of the VeriSilicon
+  APB GPIO v0.2 IP block. It has 32 ports each of which are intended to be
+  represented as child nodes with the generic GPIO-controller properties
+  as described in this binding's file.
+
+maintainers:
+  - Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+  - James Cowgill <james.cowgill@blaize.com>
+  - Matt Redfearn <matt.redfearn@blaize.com>
+  - Neil Jones <neil.jones@blaize.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - blaize,blzp1600-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    default: 32
+    minimum: 1
+    maximum: 32
+
+  interrupts:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+dependencies:
+  interrupt-controller: [ interrupts ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@4c0000 {
+      compatible = "blaize,blzp1600-gpio";
+      reg = <0x004c0000 0x1000>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      ngpios = <32>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index 0e5c22929bde..ab35bcf98101 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -71,15 +71,15 @@ unevaluatedProperties: false
 examples:
   - |
     spi {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            gpio5: gpio5@0 {
-                    compatible = "fairchild,74hc595";
-                    reg = <0>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    registers-number = <4>;
-                    spi-max-frequency = <100000>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio5@0 {
+            compatible = "fairchild,74hc595";
+            reg = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            registers-number = <4>;
+            spi-max-frequency = <100000>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
index 8ff54369d16c..b58e08c8ecd8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -84,52 +84,52 @@ examples:
         reg = <0x80018000 0x2000>;
 
         gpio@0 {
-                compatible = "fsl,imx28-gpio";
-                reg = <0>;
-                interrupts = <127>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <0>;
+            interrupts = <127>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@1 {
-                compatible = "fsl,imx28-gpio";
-                reg = <1>;
-                interrupts = <126>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <1>;
+            interrupts = <126>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@2 {
-                compatible = "fsl,imx28-gpio";
-                reg = <2>;
-                interrupts = <125>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <2>;
+            interrupts = <125>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@3 {
-                compatible = "fsl,imx28-gpio";
-                reg = <3>;
-                interrupts = <124>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <3>;
+            interrupts = <124>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@4 {
-                compatible = "fsl,imx28-gpio";
-                reg = <4>;
-                interrupts = <123>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <4>;
+            interrupts = <123>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index 7b1eb08fa055..4d3f52f8d1b8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -16,6 +16,9 @@ description: |+
 properties:
   compatible:
     oneOf:
+      - items:
+          - const: toradex,ecgpiol16
+          - const: nxp,pcal6416
       - items:
           - const: diodes,pi4ioe5v6534q
           - const: nxp,pcal6534
@@ -132,6 +135,7 @@ allOf:
               - maxim,max7325
               - maxim,max7326
               - maxim,max7327
+              - toradex,ecgpiol16
     then:
       properties:
         reset-gpios: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index 4fb32e9aec0a..a31f64b6d40b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -70,6 +70,13 @@ properties:
     minItems: 1
     maxItems: 4
 
+  gpio-reserved-ranges: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+    default: 32
+
 patternProperties:
   "^.+-hog(-[0-9]+)?$":
     type: object
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml
new file mode 100644
index 000000000000..55734190d5eb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max77759-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77759 GPIO
+
+maintainers:
+  - André Draszik <andre.draszik@linaro.org>
+
+description: |
+  This module is part of the MAX77759 PMIC. For additional information, see
+  Documentation/devicetree/bindings/mfd/maxim,max77759.yaml.
+
+  The MAX77759 is a PMIC integrating, amongst others, a GPIO controller
+  including interrupt support for 2 GPIO lines.
+
+properties:
+  compatible:
+    const: maxim,max77759-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
index 4ef06b2ff1ff..065f5761a93f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -111,6 +111,9 @@ properties:
 
   gpio-controller: true
 
+  gpio-ranges:
+    maxItems: 1
+
   "#gpio-cells":
     description: |
       Indicates how many cells are used in a consumer's GPIO specifier. In the
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
index 8bca574bb66d..5a6ecaa7b44b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
@@ -128,17 +128,17 @@ additionalProperties: false
 examples:
   - |
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            pcf8575: gpio@20 {
-                    compatible = "nxp,pcf8575";
-                    reg = <0x20>;
-                    interrupt-parent = <&irqpin2>;
-                    interrupts = <3 0>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    interrupt-controller;
-                    #interrupt-cells = <2>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pcf8575";
+            reg = <0x20>;
+            interrupt-parent = <&irqpin2>;
+            interrupts = <3 0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
index 39fd959c45d2..728099c65824 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -81,7 +81,7 @@ dependencies:
 
 examples:
   - |
-      gpio@3500 {
+    gpio@3500 {
         compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
         reg = <0x3500 0x1c>;
         gpio-controller;
@@ -91,9 +91,9 @@ examples:
         #interrupt-cells = <2>;
         interrupt-parent = <&rtlintc>;
         interrupts = <23>;
-      };
+    };
   - |
-      gpio@3300 {
+    gpio@3300 {
         compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
         reg = <0x3300 0x1c>, <0x3338 0x8>;
         gpio-controller;
@@ -103,6 +103,6 @@ examples:
         #interrupt-cells = <2>;
         interrupt-parent = <&rtlintc>;
         interrupts = <13>;
-      };
+    };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
index 8bdef812c87c..49fb8f613ead 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
@@ -57,14 +57,14 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     gpio0: gpio@e0050000 {
-            compatible = "renesas,em-gio";
-            reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-            gpio-controller;
-            #gpio-cells = <2>;
-            gpio-ranges = <&pfc 0 0 32>;
-            ngpios = <32>;
-            interrupt-controller;
-            #interrupt-cells = <2>;
+        compatible = "renesas,em-gio";
+        reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pfc 0 0 32>;
+        ngpios = <32>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index cc7a950a6030..d32e103a64aa 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -138,16 +138,16 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a77470-sysc.h>
     gpio3: gpio@e6053000 {
-            compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
-            reg = <0xe6053000 0x50>;
-            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 909>;
-            power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-            resets = <&cpg 909>;
-            gpio-controller;
-            #gpio-cells = <2>;
-            gpio-ranges = <&pfc 0 96 30>;
-            gpio-reserved-ranges = <17 10>;
-            interrupt-controller;
-            #interrupt-cells = <2>;
+        compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+        reg = <0xe6053000 0x50>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 909>;
+        power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+        resets = <&cpg 909>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pfc 0 96 30>;
+        gpio-reserved-ranges = <17 10>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
      };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index fc095646adea..4bdc201b719e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -76,8 +76,8 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      gpio@10060000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    gpio@10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
         interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
@@ -88,6 +88,6 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-      };
+    };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
new file mode 100644
index 000000000000..ec0232e72c71
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/spacemit,k1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 GPIO controller
+
+maintainers:
+  - Yixun Lan <dlan@gentoo.org>
+
+description:
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set of port controlling 32 pins.  A single
+  interrupt line is shared for all of the pins by the controller.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: spacemit,k1-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: GPIO Core Clock
+      - description: GPIO Bus Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 3
+    description:
+      The first two cells are the GPIO bank index and offset inside the bank,
+      the third cell should specify GPIO flag.
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first two cells are the GPIO bank index and offset inside the bank,
+      the third cell should specify interrupt flag. The controller does not
+      support level interrupts, so flags of IRQ_TYPE_LEVEL_HIGH,
+      IRQ_TYPE_LEVEL_LOW should not be used.
+      Refer <dt-bindings/interrupt-controller/irq.h> for valid flags.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@d4019000 {
+      compatible = "spacemit,k1-gpio";
+      reg = <0xd4019000 0x800>;
+      clocks =<&ccu 9>, <&ccu 61>;
+      clock-names = "core", "bus";
+      gpio-controller;
+      #gpio-cells = <3>;
+      interrupts = <58>;
+      interrupt-controller;
+      interrupt-parent = <&plic>;
+      #interrupt-cells = <3>;
+      gpio-ranges = <&pinctrl 0 0 0 32>,
+                    <&pinctrl 1 0 32 32>,
+                    <&pinctrl 2 0 64 32>,
+                    <&pinctrl 3 0 96 32>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
index b085450b527f..712063417bc8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -48,22 +48,22 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/interrupt-controller/irq.h>
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-      soc {
+    soc {
         #address-cells = <2>;
         #size-cells = <2>;
 
         gpio: gpio@28020000 {
-          compatible = "toshiba,gpio-tmpv7708";
-          reg = <0 0x28020000 0 0x1000>;
-          #gpio-cells = <0x2>;
-          gpio-ranges = <&pmux 0 0 32>;
-          gpio-controller;
-          interrupt-controller;
-          #interrupt-cells = <2>;
-          interrupt-parent = <&gic>;
+            compatible = "toshiba,gpio-tmpv7708";
+            reg = <0 0x28020000 0 0x1000>;
+            #gpio-cells = <0x2>;
+            gpio-ranges = <&pmux 0 0 32>;
+            gpio-controller;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gic>;
         };
-      };
+    };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index d3d8a2e143ed..8fbf12ca067e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -126,29 +126,29 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        gpio@a0020000 {
-            compatible = "xlnx,xps-gpio-1.00.a";
-            reg = <0xa0020000 0x10000>;
-            #gpio-cells = <2>;
-            #interrupt-cells = <0x2>;
-            clocks = <&zynqmp_clk 71>;
-            gpio-controller;
-            interrupt-controller;
-            interrupt-names = "ip2intc_irpt";
-            interrupt-parent = <&gic>;
-            interrupts = <0 89 4>;
-            xlnx,all-inputs = <0x0>;
-            xlnx,all-inputs-2 = <0x0>;
-            xlnx,all-outputs = <0x0>;
-            xlnx,all-outputs-2 = <0x0>;
-            xlnx,dout-default = <0x0>;
-            xlnx,dout-default-2 = <0x0>;
-            xlnx,gpio-width = <0x20>;
-            xlnx,gpio2-width = <0x20>;
-            xlnx,interrupt-present = <0x1>;
-            xlnx,is-dual = <0x1>;
-            xlnx,tri-default = <0xFFFFFFFF>;
-            xlnx,tri-default-2 = <0xFFFFFFFF>;
-        };
+    gpio@a0020000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0xa0020000 0x10000>;
+        #gpio-cells = <2>;
+        #interrupt-cells = <0x2>;
+        clocks = <&zynqmp_clk 71>;
+        gpio-controller;
+        interrupt-controller;
+        interrupt-names = "ip2intc_irpt";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        xlnx,all-inputs = <0x0>;
+        xlnx,all-inputs-2 = <0x0>;
+        xlnx,all-outputs = <0x0>;
+        xlnx,all-outputs-2 = <0x0>;
+        xlnx,dout-default = <0x0>;
+        xlnx,dout-default-2 = <0x0>;
+        xlnx,gpio-width = <0x20>;
+        xlnx,gpio2-width = <0x20>;
+        xlnx,interrupt-present = <0x1>;
+        xlnx,is-dual = <0x1>;
+        xlnx,tri-default = <0xFFFFFFFF>;
+        xlnx,tri-default-2 = <0xFFFFFFFF>;
+    };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 019bd28a29f1..b8d659d272d0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -25,6 +25,8 @@ properties:
               - realtek,rtd1619-mali
               - renesas,r9a07g044-mali
               - renesas,r9a07g054-mali
+              - renesas,r9a09g047-mali
+              - renesas,r9a09g056-mali
               - renesas,r9a09g057-mali
               - rockchip,px30-mali
               - rockchip,rk3562-mali
@@ -145,6 +147,8 @@ allOf:
             enum:
               - renesas,r9a07g044-mali
               - renesas,r9a07g054-mali
+              - renesas,r9a09g047-mali
+              - renesas,r9a09g056-mali
               - renesas,r9a09g057-mali
     then:
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index dc078ceeca9a..43c6d2d72456 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Broadcom V3D GPU
 
 maintainers:
-  - Eric Anholt <eric@anholt.net>
+  - Maíra Canal <mcanal@igalia.com>
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
 properties:
@@ -22,20 +22,12 @@ properties:
       - brcm,7278-v3d
 
   reg:
-    items:
-      - description: hub register (required)
-      - description: core0 register (required)
-      - description: GCA cache controller register (if GCA controller present)
-      - description: bridge register (if no external reset controller)
     minItems: 2
+    maxItems: 4
 
   reg-names:
-    items:
-      - const: hub
-      - const: core0
-      - enum: [ bridge, gca ]
-      - enum: [ bridge, gca ]
     minItems: 2
+    maxItems: 4
 
   interrupts:
     items:
@@ -58,6 +50,76 @@ required:
   - reg-names
   - interrupts
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,2711-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,2712-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: SMS state manager register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: sms
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,7268-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: GCA cache controller register
+            - description: bridge register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: gca
+            - const: bridge
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,7278-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: bridge register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: bridge
+
 additionalProperties: false
 
 examples:
@@ -66,9 +128,9 @@ examples:
       compatible = "brcm,7268-v3d";
       reg = <0xf1200000 0x4000>,
             <0xf1208000 0x4000>,
-            <0xf1204000 0x100>,
-            <0xf1204100 0x100>;
-      reg-names = "hub", "core0", "bridge", "gca";
+            <0xf1204100 0x100>,
+            <0xf1204000 0x100>;
+      reg-names = "hub", "core0", "gca", "bridge";
       interrupts = <0 78 4>,
                    <0 77 4>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
index 256e252f8087..4450e2e73b3c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
@@ -12,10 +12,28 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - ti,am62-gpu
-      - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
+    oneOf:
+      - items:
+          - enum:
+              - ti,am62-gpu
+          - const: img,img-axe-1-16m
+          # This deprecated element must be kept around to allow old kernels to
+          # work with newer dts.
+          - const: img,img-axe
+          - const: img,img-rogue
+      - items:
+          - enum:
+              - ti,j721s2-gpu
+          - const: img,img-bxs-4-64
+          - const: img,img-rogue
+
+      # This legacy combination of compatible strings was introduced early on
+      # before the more specific GPU identifiers were used.
+      - items:
+          - enum:
+              - ti,am62-gpu
+          - const: img,img-axe
+        deprecated: true
 
   reg:
     maxItems: 1
@@ -35,6 +53,18 @@ properties:
     maxItems: 1
 
   power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: a
+      - const: b
+    minItems: 1
+
+  dma-coherent: true
+
+  resets:
     maxItems: 1
 
 required:
@@ -47,11 +77,49 @@ required:
 additionalProperties: false
 
 allOf:
+  # Constraints added alongside the new compatible strings that would otherwise
+  # create an ABI break.
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,img-rogue
+    then:
+      required:
+        - power-domains
+        - power-domain-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,img-axe-1-16m
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,img-bxs-4-64
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+
   - if:
       properties:
         compatible:
           contains:
-            const: ti,am62-gpu
+            enum:
+              - ti,am62-gpu
+              - ti,j721s2-gpu
     then:
       properties:
         clocks:
@@ -64,10 +132,12 @@ examples:
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
     gpu@fd00000 {
-        compatible = "ti,am62-gpu", "img,img-axe";
+        compatible = "ti,am62-gpu", "img,img-axe-1-16m", "img,img-axe",
+                     "img,img-rogue";
         reg = <0x0fd00000 0x20000>;
         clocks = <&k3_clks 187 0>;
         clock-names = "core";
         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
         power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+        power-domain-names = "a";
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
new file mode 100644
index 000000000000..b0f425a4a882
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/via,vt8500-scc-id.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/WonderMedia SoC system configuration information
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+description:
+  The system configuration controller on VIA/WonderMedia SoC's contains a chip
+  identifier and revision used to differentiate between different hardware
+  versions of on-chip IP blocks having their own peculiarities which may or
+  may not be captured by their respective DT compatible strings
+
+properties:
+  compatible:
+    items:
+      - const: via,vt8500-scc-id
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@d8120000 {
+        compatible = "via,vt8500-scc-id";
+        reg = <0xd8120000 0x4>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
new file mode 100644
index 000000000000..bf028a8718f1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,lt3074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3074 voltage regulator
+
+maintainers:
+  - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
+
+description: |
+  The LT3074 is a low voltage, ultra-low noise and ultra-fast transient
+  response linear regulator. It allows telemetry for input/output voltage,
+  output current and temperature through the PMBus serial interface.
+
+  Datasheet:
+    https://www.analog.com/en/products/lt3074.html
+
+allOf:
+  - $ref: /schemas/regulator/regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,lt3074
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@6d {
+            compatible = "adi,lt3074";
+            reg = <0x6d>;
+            regulator-name = "vout";
+            regulator-max-microvolt = <1250000>;
+            regulator-min-microvolt = <1150000>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml
new file mode 100644
index 000000000000..90970a0433e9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/mps,mpq8785.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems Multiphase Voltage Regulators with PMBus
+
+maintainers:
+  - Charles Hsu <ythsu0511@gmail.com>
+
+description:
+  Monolithic Power Systems digital multiphase voltage regulators with PMBus.
+
+properties:
+  compatible:
+    enum:
+      - mps,mpm3695
+      - mps,mpm3695-25
+      - mps,mpm82504
+      - mps,mpq8785
+
+  reg:
+    maxItems: 1
+
+  mps,vout-fb-divider-ratio-permille:
+    description:
+      The feedback resistor divider ratio, expressed in permille
+      (Vfb / Vout * 1000). This value is written to the PMBUS_VOUT_SCALE_LOOP
+      register and is required for correct output voltage presentation.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4095
+    default: 706
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mps,mpm3695
+            - mps,mpm82504
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 1023
+
+  - if:
+      properties:
+        compatible:
+          const: mps,mpq8785
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 2047
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@30 {
+        compatible = "mps,mpm82504";
+        reg = <0x30>;
+        mps,vout-fb-divider-ratio-permille = <600>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
index f0667ac41d75..b76805d39427 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
@@ -11,7 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    const: sophgo,sg2042-hwmon-mcu
+    oneOf:
+      - items:
+          - const: sophgo,sg2044-hwmon-mcu
+          - const: sophgo,sg2042-hwmon-mcu
+      - const: sophgo,sg2042-hwmon-mcu
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml
index 5d33f1a23d03..9ca7356760a7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml
@@ -28,6 +28,17 @@ properties:
   i2c-mux:
     type: object
 
+  fan:
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
+  "#pwm-cells":
+    const: 2
+    description: |
+      Number of cells in a PWM specifier.
+      - cell 0: PWM period in nanoseconds
+      - cell 1: PWM polarity: 0 or PWM_POLARITY_INVERTED
+
 required:
   - compatible
   - reg
@@ -50,9 +61,14 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        fan@18 {
+        fan_controller: fan@18 {
             compatible = "ti,amc6821";
             reg = <0x18>;
+            #pwm-cells = <2>;
+
+            fan {
+                pwms = <&fan_controller 40000 0>;
+            };
         };
     };
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index bc03781342c0..d1fb7b9abda0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -19,6 +19,7 @@ description: |
 properties:
   compatible:
     enum:
+      - silergy,sq52206
       - silergy,sy24655
       - ti,ina209
       - ti,ina219
@@ -58,6 +59,9 @@ properties:
       shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
       voltage range is used.
 
+      For SQ52206,the shunt-gain value 1 mapps to ADCRANGE=10/11, the value 2
+      mapps to ADCRANGE=01, and the value 4 mapps to ADCRANGE=00.
+
       The default value is device dependent, and is defined by the reset value
       of PGA/ADCRANGE in the respective configuration registers.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -97,6 +101,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - silergy,sq52206
               - silergy,sy24655
               - ti,ina209
               - ti,ina219
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
index 7e5b62a0215d..4c89448eba0d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -23,6 +23,9 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  vcc-supply:
+    description: Power supply for tmp102
+
 required:
   - compatible
   - reg
@@ -42,6 +45,7 @@ examples:
             reg = <0x48>;
             interrupt-parent = <&gpio7>;
             interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            vcc-supply = <&supply>;
             #thermal-sensor-cells = <1>;
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
index fda0467cdd95..23fe8ff76645 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -52,6 +52,7 @@ properties:
           - const: mediatek,mt8173-i2c
       - items:
           - enum:
+              - mediatek,mt6893-i2c
               - mediatek,mt8195-i2c
           - const: mediatek,mt8192-i2c
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 8101afa6f146..2f1e97969c3f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -37,6 +37,7 @@ properties:
               - rockchip,px30-i2c
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
+              - rockchip,rk3528-i2c
               - rockchip,rk3562-i2c
               - rockchip,rk3568-i2c
               - rockchip,rk3576-i2c
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-wmt.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
deleted file mode 100644
index 94a425eaa6c7..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Wondermedia I2C Controller
-
-Required properties :
-
- - compatible : should be "wm,wm8505-i2c"
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number
- - clocks : phandle to the I2C clock source
-
-Optional properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-	Valid values are 100000 and 400000.
-	Default to 100000 if not specified, or invalid value.
-
-Example :
-
-	i2c_0: i2c@d8280000 {
-		compatible = "wm,wm8505-i2c";
-		reg = <0xd8280000 0x1000>;
-		interrupts = <19>;
-		clocks = <&clki2c0>;
-		clock-frequency = <400000>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index b57ae6963e62..6b6f6762d122 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -97,7 +97,10 @@ properties:
 
   resets:
     items:
-      - description: module reset
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
 
   reset-names:
     items:
@@ -116,6 +119,13 @@ properties:
       - const: rx
       - const: tx
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml
   - if:
@@ -169,6 +179,18 @@ allOf:
       properties:
         power-domains: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
index eddfd329c67b..69ac5db8b914 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -26,7 +26,8 @@ properties:
       - const: realtek,rtl9301-i2c
 
   reg:
-    description: Register offset and size this I2C controller.
+    items:
+      - description: Register offset and size this I2C controller.
 
   "#address-cells":
     const: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/renesas,riic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 1b7fed232642..cc39511a49d6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -29,6 +29,7 @@ properties:
           - enum:
               - renesas,riic-r9a08g045   # RZ/G3S
               - renesas,riic-r9a09g047   # RZ/G3E
+              - renesas,riic-r9a09g056   # RZ/V2N
           - const: renesas,riic-r9a09g057   # RZ/V2H(P)
 
       - const: renesas,riic-r9a09g057   # RZ/V2H(P)
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index bc5d0fb5abfe..d904191bb0c6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -32,15 +32,13 @@ properties:
           - const: renesas,r9a06g032-i2c  # RZ/N1D
           - const: renesas,rzn1-i2c       # RZ/N1
           - const: snps,designware-i2c
-      - description: Microsemi Ocelot SoCs I2C controller
-        items:
-          - const: mscc,ocelot-i2c
-          - const: snps,designware-i2c
       - description: Baikal-T1 SoC System I2C controller
         const: baikal,bt1-sys-i2c
-      - description: T-HEAD TH1520 SoCs I2C controller
-        items:
-          - const: thead,th1520-i2c
+      - items:
+          - enum:
+              - mscc,ocelot-i2c
+              - sophgo,sg2044-i2c
+              - thead,th1520-i2c
           - const: snps,designware-i2c
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml
new file mode 100644
index 000000000000..e498ce47b885
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/wm,wm8505-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on WonderMedia WM8505 and related SoCs
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: wm,wm8505-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c_0: i2c@d8280000 {
+        compatible = "wm,wm8505-i2c";
+        reg = <0xd8280000 0x1000>;
+        interrupts = <19>;
+        clocks = <&clki2c0>;
+        clock-frequency = <400000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
index 4fbdcdac0aee..853092f7522d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -9,14 +9,17 @@ title: Silvaco I3C master
 maintainers:
   - Conor Culhane <conor.culhane@silvaco.com>
 
-allOf:
-  - $ref: i3c.yaml#
-
 properties:
   compatible:
-    enum:
-      - nuvoton,npcm845-i3c
-      - silvaco,i3c-master-v1
+    oneOf:
+      - enum:
+          - nuvoton,npcm845-i3c
+          - silvaco,i3c-master-v1
+      - items:
+          - enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+          - const: silvaco,i3c-master-v1
 
   reg:
     maxItems: 1
@@ -25,12 +28,14 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
     items:
       - description: system clock
       - description: bus clock
       - description: other (slower) events clock
 
   clock-names:
+    minItems: 2
     items:
       - const: pclk
       - const: fast_clk
@@ -46,6 +51,34 @@ required:
   - clock-names
   - clocks
 
+allOf:
+  - $ref: i3c.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nuvoton,npcm845-i3c
+            - silvaco,i3c-master-v1
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index ff4f5c21c548..8dae89ecb64d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -25,6 +25,7 @@ description: |
   * https://www.analog.com/en/products/ad7386-4.html
   * https://www.analog.com/en/products/ad7387-4.html
   * https://www.analog.com/en/products/ad7388-4.html
+  * https://www.analog.com/en/products/ad7389-4.html
   * https://www.analog.com/en/products/adaq4370-4.html
   * https://www.analog.com/en/products/adaq4380-4.html
   * https://www.analog.com/en/products/adaq4381-4.html
@@ -49,6 +50,7 @@ properties:
       - adi,ad7386-4
       - adi,ad7387-4
       - adi,ad7388-4
+      - adi,ad7389-4
       - adi,adaq4370-4
       - adi,adaq4380-4
       - adi,adaq4381-4
@@ -213,6 +215,15 @@ allOf:
       properties:
         refin-supply: false
 
+  # adi,ad7389-4 is internal reference only
+  - if:
+      properties:
+        compatible:
+          const: adi,ad7389-4
+    then:
+      properties:
+        refio-supply: false
+
   # adaq devices need more supplies and using channel to declare gain property
   # only applies to adaq devices
   - if:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index 44c671eeda73..d0cb32f136e5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -17,35 +17,40 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,ad7091
-      - adi,ad7091r
-      - adi,ad7273
-      - adi,ad7274
-      - adi,ad7276
-      - adi,ad7277
-      - adi,ad7278
-      - adi,ad7466
-      - adi,ad7467
-      - adi,ad7468
-      - adi,ad7475
-      - adi,ad7476
-      - adi,ad7476a
-      - adi,ad7477
-      - adi,ad7477a
-      - adi,ad7478
-      - adi,ad7478a
-      - adi,ad7495
-      - adi,ad7910
-      - adi,ad7920
-      - adi,ad7940
-      - ti,adc081s
-      - ti,adc101s
-      - ti,adc121s
-      - ti,ads7866
-      - ti,ads7867
-      - ti,ads7868
-      - lltc,ltc2314-14
+    oneOf:
+      - items:
+          - enum:
+              - adi,ad7091
+              - adi,ad7091r
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7475
+              - adi,ad7476
+              - adi,ad7476a
+              - adi,ad7477
+              - adi,ad7477a
+              - adi,ad7478
+              - adi,ad7478a
+              - adi,ad7495
+              - adi,ad7910
+              - adi,ad7920
+              - adi,ad7940
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7867
+              - ti,ads7868
+              - lltc,ltc2314-14
+      - items:
+          - const: rohm,bu79100g
+          - const: ti,ads7866
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 52d3f1ce3367..1a5209139e13 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -45,6 +45,14 @@ properties:
   "#size-cells":
     const: 0
 
+  '#trigger-source-cells':
+    description: |
+      Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7606.h.
+    const: 1
+
   # According to the datasheet, "Data is clocked in from SDI on the falling
   # edge of SCLK, while data is clocked out on DOUTA on the rising edge of
   # SCLK".  Also, even if not stated textually in the datasheet, it is made
@@ -215,12 +223,6 @@ allOf:
       - required:
           - pwms
 
-  - oneOf:
-      - required:
-          - interrupts
-      - required:
-          - io-backends
-
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
index b0962a4583ac..bb9825e7346d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -23,6 +23,7 @@ properties:
               - amlogic,meson8m2-saradc
               - amlogic,meson-gxbb-saradc
               - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxlx-saradc
               - amlogic,meson-gxm-saradc
               - amlogic,meson-axg-saradc
               - amlogic,meson-g12a-saradc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 6168b44ea72c..b489c984c1bb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -34,6 +34,7 @@ properties:
           - const: mediatek,mt2701-auxadc
       - items:
           - enum:
+              - mediatek,mt6893-auxadc
               - mediatek,mt8183-auxadc
               - mediatek,mt8186-auxadc
               - mediatek,mt8188-auxadc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 06951ec5f5da..3a69ec60edb9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -32,6 +32,9 @@ properties:
   spi-max-frequency:
     maximum: 20000000
 
+  reset-gpios:
+    maxItems: 1
+
   clocks:
     description: |
       Phandle and clock identifier for external sampling clock.
@@ -71,6 +74,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -80,6 +84,7 @@ examples:
         reg = <0>;
         interrupt-parent = <&gpio5>;
         interrupts = <15 2>;
+        reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
         spi-max-frequency = <20000000>;
         microchip,device-addr = <0>;
         vref-supply = <&vref_reg>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
new file mode 100644
index 000000000000..8ce7d415d956
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton nct7201 and similar ADCs
+
+maintainers:
+  - Eason Yang <j2anfernee@gmail.com>
+
+description: |
+  The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12
+  voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus
+  address selection by ADDR connection. It also provides ALERT# signal for
+  event notification and reset input RSTIN# to recover it from a fault
+  condition.
+
+  NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8).
+  NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12).
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7201
+      - nuvoton,nct7202
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      A 3.3V to supply that powers the chip.
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "nuvoton,nct7202";
+            reg = <0x1d>;
+            vdd-supply = <&vdd>;
+            vref-supply = <&vref>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index f39bc92c2b99..862e450da214 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm's SPMI PMIC Round Robin ADC
 
 maintainers:
-  - Caleb Connolly <caleb.connolly@linaro.org>
+  - Casey Connolly <casey.connolly@linaro.org>
 
 description: |
   The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml
new file mode 100644
index 000000000000..2a8ad4fdfc6b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rohm,bd79104.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM Semiconductor BD79104 ADC
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  12 bit SPI ADC with 8 channels.
+
+properties:
+  compatible:
+    const: rohm,bd79104
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+# The component data-sheet says the frequency is 20M. I, however, found
+# that the ROHM evaluation board BD79104FV-EVK-001 had problems with 20M.
+# I have successfully used it with 4M. My _assumption_ is that this is not
+# the limitation of the component itself, but a limitation of the EVK.
+  spi-max-frequency:
+    maximum: 20000000
+
+  "#io-channel-cells":
+    const: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - iovdd-supply
+  - spi-cpha
+  - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "rohm,bd79104";
+            reg = <0>;
+            vdd-supply = <&vdd_supply>;
+            iovdd-supply = <&iovdd_supply>;
+            spi-max-frequency = <4000000>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
new file mode 100644
index 000000000000..503285823376
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rohm,bd79124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD79124 ADC/GPO
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports
+  an automatic measurement mode, with an alarm interrupt for out-of-window
+  measurements. ADC input pins can be also configured as general purpose
+  outputs.
+
+properties:
+  compatible:
+    const: rohm,bd79124
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 1
+    description:
+      The pin number.
+
+  vdd-supply: true
+
+  iovdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-7]+$":
+    type: object
+    $ref: /schemas/iio/adc/adc.yaml#
+    description: Represents ADC channel.
+
+    properties:
+      reg:
+        description: AIN pin number
+        minimum: 0
+        maximum: 7
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iovdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc: adc@10 {
+            compatible = "rohm,bd79124";
+            reg = <0x10>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+
+            vdd-supply = <&dummyreg>;
+            iovdd-supply = <&dummyreg>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+            channel@1 {
+                reg = <1>;
+            };
+            channel@2 {
+                reg = <2>;
+            };
+            channel@3 {
+                reg = <3>;
+            };
+            channel@4 {
+                reg = <4>;
+            };
+            channel@5 {
+                reg = <5>;
+            };
+            channel@6 {
+                reg = <6>;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index ef9dcc365eab..17bb60e18a1c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -498,7 +498,7 @@ patternProperties:
 examples:
   - |
     // Example 1: with stm32f429, ADC1, single-ended channel 8
-      adc123: adc@40012000 {
+    adc123: adc@40012000 {
         compatible = "st,stm32f4-adc-core";
         reg = <0x40012000 0x400>;
         interrupts = <18>;
@@ -512,28 +512,28 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@0 {
-          compatible = "st,stm32f4-adc";
-          #io-channel-cells = <1>;
-          reg = <0x0>;
-          clocks = <&rcc 0 168>;
-          interrupt-parent = <&adc123>;
-          interrupts = <0>;
-          st,adc-channels = <8>;
-          dmas = <&dma2 0 0 0x400 0x0>;
-          dma-names = "rx";
-          assigned-resolution-bits = <8>;
+            compatible = "st,stm32f4-adc";
+            #io-channel-cells = <1>;
+            reg = <0x0>;
+            clocks = <&rcc 0 168>;
+            interrupt-parent = <&adc123>;
+            interrupts = <0>;
+            st,adc-channels = <8>;
+            dmas = <&dma2 0 0 0x400 0x0>;
+            dma-names = "rx";
+            assigned-resolution-bits = <8>;
         };
         // ...
         // other adc child nodes follow...
-      };
+    };
 
   - |
     // Example 2: with stm32mp157c to setup ADC1 with:
     // - channels 0 & 1 as single-ended
     // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
-      #include <dt-bindings/clock/stm32mp1-clks.h>
-      adc12: adc@48003000 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    adc12: adc@48003000 {
         compatible = "st,stm32mp1-adc-core";
         reg = <0x48003000 0x400>;
         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -550,27 +550,27 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@0 {
-          compatible = "st,stm32mp1-adc";
-          #io-channel-cells = <1>;
-          reg = <0x0>;
-          interrupt-parent = <&adc12>;
-          interrupts = <0>;
-          st,adc-channels = <0 1>;
-          st,adc-diff-channels = <2 6>, <3 7>;
-          st,min-sample-time-nsecs = <5000>;
-          dmas = <&dmamux1 9 0x400 0x05>;
-          dma-names = "rx";
+            compatible = "st,stm32mp1-adc";
+            #io-channel-cells = <1>;
+            reg = <0x0>;
+            interrupt-parent = <&adc12>;
+            interrupts = <0>;
+            st,adc-channels = <0 1>;
+            st,adc-diff-channels = <2 6>, <3 7>;
+            st,min-sample-time-nsecs = <5000>;
+            dmas = <&dmamux1 9 0x400 0x05>;
+            dma-names = "rx";
         };
         // ...
         // other adc child node follow...
-      };
+    };
 
   - |
     // Example 3: with stm32mp157c to setup ADC2 with:
     // - internal channels 13, 14, 15.
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
-      #include <dt-bindings/clock/stm32mp1-clks.h>
-      adc122: adc@48003000 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    adc122: adc@48003000 {
         compatible = "st,stm32mp1-adc-core";
         reg = <0x48003000 0x400>;
         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -587,28 +587,28 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@100 {
-          compatible = "st,stm32mp1-adc";
-          #io-channel-cells = <1>;
-          reg = <0x100>;
-          interrupts = <1>;
-          #address-cells = <1>;
-          #size-cells = <0>;
-          channel@13 {
-            reg = <13>;
-            label = "vrefint";
-            st,min-sample-time-ns = <9000>;
-          };
-          channel@14 {
-            reg = <14>;
-            label = "vddcore";
-            st,min-sample-time-ns = <9000>;
-          };
-          channel@15 {
-            reg = <15>;
-            label = "vbat";
-            st,min-sample-time-ns = <9000>;
-          };
+            compatible = "st,stm32mp1-adc";
+            #io-channel-cells = <1>;
+            reg = <0x100>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@13 {
+                reg = <13>;
+                label = "vrefint";
+                st,min-sample-time-ns = <9000>;
+            };
+            channel@14 {
+                reg = <14>;
+                label = "vddcore";
+                st,min-sample-time-ns = <9000>;
+            };
+            channel@15 {
+                reg = <15>;
+                label = "vbat";
+                st,min-sample-time-ns = <9000>;
+            };
         };
-      };
+    };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml
new file mode 100644
index 000000000000..2a6ddb33f163
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/winsen,mhz19b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MHZ19B CO2 sensor
+
+maintainers:
+  - Gyeyoung Baek <gye976@gmail.com>
+
+properties:
+  compatible:
+    const: winsen,mhz19b
+
+  vin-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - vin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      co2-sensor {
+        compatible = "winsen,mhz19b";
+        vin-supply = <&vdd>;
+      };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml
new file mode 100644
index 000000000000..a355d52a9d64
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3530r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD3530R and Similar DACs
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+  The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power,
+  16-bit, buffered voltage output digital-to-analog converters (DACs) with
+  software-programmable gain controls, providing full-scale output spans of 2.5V
+  or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V
+  to 5.5V supply and are guaranteed monotonic by design. The "R" variants
+  include a 2.5V, 5ppm/°C internal reference, which is disabled by default.
+  Datasheet can be found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad3530_ad530r.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad3531-ad3531r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3530
+      - adi,ad3530r
+      - adi,ad3531
+      - adi,ad3531r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  vdd-supply:
+    description: Power Supply Input.
+
+  iovdd-supply:
+    description: Digital Power Supply Input.
+
+  io-channels:
+    description:
+      ADC channel used to monitor internal die temperature, output voltages, and
+      current of a selected channel via the MUXOUT pin.
+    maxItems: 1
+
+  ref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin.
+
+  reset-gpios:
+    description:
+      Active low signal that is falling edge sensitive. When it is deasserted,
+      the digital core initialization is performed and all DAC registers except
+      the Interface Configuration A register are reset to their default values.
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels. If
+      not present, the DAC channels are updated by Software LDAC.
+    maxItems: 1
+
+  adi,range-double:
+    description:
+      Configure the output range for all channels. If the property is present,
+      the output will range from 0V to 2Vref. If the property is not present,
+      the output will range from 0V to Vref.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - iovdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            compatible = "adi,ad3530r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+
+            vdd-supply = <&vdd>;
+            iovdd-supply = <&iovdd>;
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 2d2561a52683..547044b8e246 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -217,7 +217,7 @@ required:
   - reg
   - spi-max-frequency
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
index 5ee80bf6aa11..f994c1ef6d41 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -27,6 +27,8 @@ properties:
 
   vdrive-supply: true
 
+  vrefin-supply: true
+
   reset-gpios:
     maxItems: 1
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
index 33490853497b..1aece3392b77 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
@@ -144,7 +144,7 @@ required:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
index c8c434c10643..3c8e5781e42c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
@@ -124,7 +124,7 @@ required:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
index 0dc577c33918..26011b5639d8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
@@ -64,7 +64,7 @@ required:
   - reg
   - vdd-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
index 941a49c93943..c00fa50e42e8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
@@ -5,19 +5,26 @@
 $id: http://devicetree.org/schemas/iio/dac/rohm,bd79703.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD79703 DAC device driver
+title: ROHM BD79700, BD79701, BD79702 and BD79703 DACs
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  The ROHM BD79703 is a 6 channel, 8-bit DAC.
-  Datasheet can be found here:
+  The ROHM BD7970[0,1,2,3] are 8-bit DACs. The BD79700 has 2 channels,
+  BD79701 3 channels, BD79702 4 channels and BD79703 has 6 channels.
+  Datasheets for BD79702 and BD79703 can be found from
   https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79702fv-lb_bd79703fv-lb-e.pdf
+  and for the BD79700 and the BD79701 from
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79700fvm-lb_bd79701fvm-lb-e.pdf
 
 properties:
   compatible:
-    const: rohm,bd79703
+    enum:
+      - rohm,bd79700
+      - rohm,bd79701
+      - rohm,bd79702
+      - rohm,bd79703
 
   reg:
     maxItems: 1
@@ -27,23 +34,35 @@ properties:
 
   vfs-supply:
     description:
-      The regulator to use as a full scale voltage. The voltage should be between 2.7V .. VCC
+      The regulator to use as a full scale voltage. The voltage should be
+      between 2.7V .. VCC. Not present on BD79700 and BD79701.
 
   vcc-supply:
     description:
-      The regulator supplying the operating voltage. Should be between 2.7V ... 5.5V
+      The regulator supplying the operating voltage. Should be between
+      2.7V ... 5.5V. Is used also as a Vfs on BD79700 and BD79701.
 
 required:
   - compatible
   - reg
   - spi-max-frequency
-  - vfs-supply
   - vcc-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rohm,bd79702
+          - rohm,bd79703
+then:
+  required:
+    - vfs-supply
+
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
index b77e855bd594..ff0cb553e871 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -44,6 +44,24 @@ properties:
   '#clock-cells':
     const: 0
 
+  adi,lpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the low-pass, output filter when operated in
+      'auto' mode. The selected low-pass corner frequency will be greater than,
+      or equal to, `rf_in` + `lpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
+  adi,hpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the high-pass, input filter when operated in
+      'auto' mode. The selected high-pass corner frequency will be less than,
+      or equal to, `rf_in` - `hpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
 required:
   - compatible
   - reg
@@ -61,6 +79,8 @@ examples:
         spi-max-frequency = <10000000>;
         clocks = <&admv8818_rfin>;
         clock-names = "rf_in";
+        adi,lpf-margin-mhz = <300>;
+        adi,hpf-margin-mhz = <300>;
       };
     };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
index d1a6103fc37a..f3242dc0e7e6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -21,7 +21,7 @@ properties:
   vlogic-supply: true
 
   interrupts:
-    minItems: 1
+    maxItems: 1
     description:
       Interrupt mapping for the trigger interrupt from the internal oscillator.
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
index a4c273c7a67f..cf5324de4fd6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -53,7 +53,7 @@ required:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 7e4492bbd027..d4d4e5c3d856 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -39,7 +39,16 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
 
   drive-open-drain:
     type: boolean
@@ -76,6 +85,7 @@ examples:
             reg = <0x68>;
             interrupt-parent = <&gpio2>;
             interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
             vdd-supply = <&vdd>;
             vddio-supply = <&vddio>;
         };
@@ -95,6 +105,7 @@ examples:
             spi-cpol;
             interrupt-parent = <&gpio1>;
             interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
             vdd-supply = <&vdd>;
             vddio-supply = <&vddio>;
         };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/light/bh1750.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1a88b3c253d5..9df81c271411 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -24,6 +24,10 @@ properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    description: GPIO connected to the DVI reset pin (active low)
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -32,6 +36,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -39,6 +44,7 @@ examples:
       light-sensor@23 {
         compatible = "rohm,bh1750";
         reg = <0x23>;
+        reset-gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
       };
     };
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
index 89977b9f01cf..412c7bcc310f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -102,7 +102,7 @@ required:
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml
 
-additionalProperties: false
+unevaluatedProperties: false
 
 dependentSchemas:
   honeywell,pmin-pascal:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
index 6994b30015bd..c756aa863103 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -115,7 +115,7 @@ allOf:
         honeywell,pmin-pascal: false
         honeywell,pmax-pascal: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/dlg,da7280.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/dlg,da7280.txt
deleted file mode 100644
index 96ee5d50e111..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/dlg,da7280.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-Dialog Semiconductor DA7280 Haptics bindings
-
-Required properties:
-- compatible: Should be "dlg,da7280".
-- reg: Specifies the I2C slave address.
-
-- interrupt-parent : Specifies the phandle of the interrupt controller to
-  which the IRQs from DA7280 are delivered to.
-
-- dlg,actuator-type: Set Actuator type. it should be one of:
-  "LRA" - Linear Resonance Actuator type.
-  "ERM-bar" - Bar type Eccentric Rotating Mass.
-  "ERM-coin" - Coin type Eccentric Rotating Mass.
-
-- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT.
-  Possible values:
-	1 - Direct register override(DRO) mode triggered by i2c(default),
-	2 - PWM data source mode controlled by PWM duty,
-- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC.
-  Possible values:
-	1 - Register triggered waveform memory(RTWM) mode, the pattern
-	    assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP,
-	2 - Edge triggered waveform memory(ETWM) mode, external GPI(N)
-	    control are required to enable/disable and it needs to keep
-	    device enabled by sending magnitude (X > 0),
-	    the pattern is assigned to the GPI(N)_SEQUENCE_ID below.
-	The default value is 1 for both of the operation modes.
-	For more details, please see the datasheet.
-
-- dlg,nom-microvolt: Nominal actuator voltage rating.
-  Valid values: 0 - 6000000.
-- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating.
-  Valid values: 0 - 6000000.
-- dlg,imax-microamp: Actuator max current rating.
-  Valid values: 0 - 252000.
-  Default: 130000.
-- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms.
-  Valid values: 0 - 1500000000.
-
-Optional properties:
-- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-  PWM properties should be named "pwms". And number of cell is different
-  for each pwm device.
-  (See Documentation/devicetree/bindings/pwm/pwm.txt
-   for further information relating to pwm properties)
-
-- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip)
-  to play back when RTWM-MODE is enabled.
-  Valid range: 0 - 15.
-- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence
-  pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated.
-  Valid range: 0 - 15.
-- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play
-  when gpi0 is triggered, 'N' must be 0 - 2.
-  Valid range: 0 - 15.
-- dlg,gpiN-mode: the pattern mode which can select either
-  "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2.
-- dlg,gpiN-polarity: gpiN polarity which can be chosen among
-  "Rising-edge", "Falling-edge" and "Both-edge",
-  'N' must be 0 - 2
-  Haptic will work by this edge option in case of ETWM mode.
-
-- dlg,resonant-freq-hz: use in case of LRA.
-  the frequency range: 50 - 300.
-  Default: 205.
-
-- dlg,bemf-sens-enable: Enable for internal loop computations.
-- dlg,freq-track-enable: Enable for resonant frequency tracking.
-- dlg,acc-enable: Enable for active acceleration.
-- dlg,rapid-stop-enable: Enable for rapid stop.
-- dlg,amp-pid-enable: Enable for the amplitude PID.
-- dlg,mem-array: Customized waveform memory(patterns) data downloaded to
-  the device during initialization. This is an array of 100 values(u8).
-
-For further information, see device datasheet.
-
-======
-
-Example:
-
-	haptics: da7280-haptics@4a {
-		compatible = "dlg,da7280";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
-		dlg,nom-microvolt = <2000000>;
-		dlg,abs-max-microvolt = <2000000>;
-		dlg,imax-microamp = <170000>;
-		dlg,resonant-freq-hz = <180>;
-		dlg,impd-micro-ohms = <10500000>;
-		dlg,freq-track-enable;
-		dlg,rapid-stop-enable;
-		dlg,mem-array = <
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/dlg,da7280.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/dlg,da7280.yaml
new file mode 100644
index 000000000000..0d06755aaaa8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/dlg,da7280.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7280 Low Power High-Definition Haptic Driver
+
+maintainers:
+  - Roy Im <roy.im.opensource@diasemi.com>
+
+properties:
+  compatible:
+    const: dlg,da7280
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+
+  dlg,actuator-type:
+    enum:
+      - LRA # Linear Resonance Actuator type
+      - ERM-bar # Bar type Eccentric Rotating Mass
+      - ERM-coin # Coin type Eccentric Rotating Mass
+
+  dlg,const-op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # Direct register override (DRO) mode triggered by i2c (default)
+      - 2 # PWM data source mode controlled by PWM duty
+    description:
+      Haptic operation mode for FF_CONSTANT
+
+  dlg,periodic-op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # Register triggered waveform memory(RTWM) mode, the pattern
+          # assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP
+      - 2 # Edge triggered waveform memory(ETWM) mode, external GPI(N)
+          # control are required to enable/disable and it needs to keep
+          # device enabled by sending magnitude (X > 0),
+          # the pattern is assigned to the GPI(N)_SEQUENCE_ID below
+    default: 1
+    description:
+      Haptic operation mode for FF_PERIODIC.
+      The default value is 1 for both of the operation modes.
+      For more details, please see the datasheet
+
+  dlg,nom-microvolt:
+    minimum: 0
+    maximum: 6000000
+    description:
+      Nominal actuator voltage rating
+
+  dlg,abs-max-microvolt:
+    minimum: 0
+    maximum: 6000000
+    description:
+      Absolute actuator maximum voltage rating
+
+  dlg,imax-microamp:
+    minimum: 0
+    maximum: 252000
+    default: 130000
+    description:
+      Actuator max current rating
+
+  dlg,impd-micro-ohms:
+    minimum: 0
+    maximum: 1500000000
+    description:
+      Impedance of the actuator
+
+  pwms:
+    maxItems: 1
+
+  dlg,ps-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      The PS_SEQ_ID(pattern ID in waveform memory inside chip)
+      to play back when RTWM-MODE is enabled
+
+  dlg,ps-seq-loop:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      The PS_SEQ_LOOP, Number of times the pre-stored sequence pointed to by
+      PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated
+
+  dlg,gpi0-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI0_SEQUENCE_ID, pattern to play when gpi0 is triggered
+
+  dlg,gpi1-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI1_SEQUENCE_ID, pattern to play when gpi1 is triggered
+
+  dlg,gpi2-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI2_SEQUENCE_ID, pattern to play when gpi2 is triggered
+
+  dlg,gpi0-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi0
+
+  dlg,gpi1-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi1
+
+  dlg,gpi2-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi2
+
+  dlg,gpi0-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi0 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,gpi1-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi1 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,gpi2-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi2 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,resonant-freq-hz:
+    minimum: 50
+    maximum: 300
+    default: 205
+
+  dlg,bemf-sens-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for internal loop computations
+
+  dlg,freq-track-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for resonant frequency tracking
+
+  dlg,acc-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for active acceleration
+
+  dlg,rapid-stop-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for rapid stop
+
+  dlg,amp-pid-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for the amplitude PID
+
+  dlg,mem-array:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 100
+    description:
+      Customized waveform memory (patterns) data downloaded to the device during initialization.
+      Each entry value must be included between 0 and 255.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dlg,actuator-type
+  - dlg,const-op-mode
+  - dlg,periodic-op-mode
+  - dlg,nom-microvolt
+  - dlg,abs-max-microvolt
+  - dlg,imax-microamp
+  - dlg,impd-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@4a {
+            compatible = "dlg,da7280";
+            reg = <0x4a>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+            dlg,actuator-type = "LRA";
+            dlg,const-op-mode = <1>;
+            dlg,periodic-op-mode = <1>;
+            dlg,nom-microvolt = <2000000>;
+            dlg,abs-max-microvolt = <2000000>;
+            dlg,imax-microamp = <170000>;
+            dlg,resonant-freq-hz = <180>;
+            dlg,impd-micro-ohms = <10500000>;
+            dlg,freq-track-enable;
+            dlg,rapid-stop-enable;
+            dlg,mem-array = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index cb3e1801b0d3..0840e4ab28b7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Elan eKTH6915 touchscreen controller
+title: Elan I2C-HID touchscreen controllers
 
 maintainers:
   - Douglas Anderson <dianders@chromium.org>
 
 description:
-  Supports the Elan eKTH6915 touchscreen controller.
-  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+  Supports the Elan eKTH6915 and other I2C-HID touchscreen controllers.
+  These touchscreen controller use the i2c-hid protocol with a reset GPIO.
 
 allOf:
   - $ref: /schemas/input/touchscreen/touchscreen.yaml#
@@ -23,12 +23,14 @@ properties:
           - enum:
               - elan,ekth5015m
           - const: elan,ekth6915
+      - items:
+          - const: elan,ekth8d18
+          - const: elan,ekth6a12nay
       - enum:
           - elan,ekth6915
           - elan,ekth6a12nay
 
-  reg:
-    const: 0x10
+  reg: true
 
   interrupts:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 70a922e213f2..ab821490284a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -103,16 +103,9 @@ properties:
     minimum: 0
     maximum: 255
 
-  touchscreen-size-x: true
-  touchscreen-size-y: true
-  touchscreen-fuzz-x: true
-  touchscreen-fuzz-y: true
-  touchscreen-inverted-x: true
-  touchscreen-inverted-y: true
-  touchscreen-swapped-x-y: true
   interrupt-controller: true
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
index 4b08be72bbd7..534644cccdcb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
@@ -70,8 +70,8 @@ examples:
         reg = <0x00580000 0x14000>;
         #interconnect-cells = <1>;
 
-          snoc_mm: interconnect-snoc {
-              compatible = "qcom,msm8939-snoc-mm";
-              #interconnect-cells = <1>;
-          };
+        snoc_mm: interconnect-snoc {
+            compatible = "qcom,msm8939-snoc-mm";
+            #interconnect-cells = <1>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml
index 343ff62d7b65..56cdb77b369a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml
@@ -84,17 +84,17 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8953.h>
 
-      snoc: interconnect@580000 {
-          compatible = "qcom,msm8953-snoc";
-          reg = <0x580000 0x16080>;
+    interconnect@580000 {
+        compatible = "qcom,msm8953-snoc";
+        reg = <0x580000 0x16080>;
 
-          #interconnect-cells = <2>;
+        #interconnect-cells = <2>;
 
-          snoc_mm: interconnect-snoc {
-              compatible = "qcom,msm8953-snoc-mm";
+        interconnect-snoc {
+            compatible = "qcom,msm8953-snoc-mm";
 
-              #interconnect-cells = <2>;
-          };
-      };
+            #interconnect-cells = <2>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 8004c4baf397..95ce25ce1f7d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -50,13 +50,13 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@fc380000 {
-              reg = <0xfc380000 0x6a000>;
-              compatible = "qcom,msm8974-bimc";
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    interconnect@fc380000 {
+        reg = <0xfc380000 0x6a000>;
+        compatible = "qcom,msm8974-bimc";
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 4ac0863205b3..cd4bb912e0dc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -28,6 +28,7 @@ properties:
           - const: qcom,osm-l3
       - items:
           - enum:
+              - qcom,sa8775p-epss-l3
               - qcom,sc7280-epss-l3
               - qcom,sc8280xp-epss-l3
               - qcom,sm6375-cpucp-l3
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 5aaa92a7cef7..01d436d4a553 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -41,10 +41,10 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
 
-      bimc: interconnect@400000 {
-          compatible = "qcom,msm8916-bimc";
-          reg = <0x00400000 0x62000>;
-          #interconnect-cells = <1>;
-      };
+    interconnect@400000 {
+        compatible = "qcom,msm8916-bimc";
+        reg = <0x00400000 0x62000>;
+        #interconnect-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 1b9164dc162f..dad3ad2fd93b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -127,19 +127,19 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
 
-      mem_noc: interconnect@1380000 {
-             compatible = "qcom,sdm845-mem-noc";
-             reg = <0x01380000 0x27200>;
-             #interconnect-cells = <1>;
-             qcom,bcm-voters = <&apps_bcm_voter>;
-      };
+    interconnect@1380000 {
+        compatible = "qcom,sdm845-mem-noc";
+        reg = <0x01380000 0x27200>;
+        #interconnect-cells = <1>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
 
-      mmss_noc: interconnect@1740000 {
-             compatible = "qcom,sdm845-mmss-noc";
-             reg = <0x01740000 0x1c1000>;
-             #interconnect-cells = <1>;
-             qcom,bcm-voter-names = "apps", "disp";
-             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
-      };
+    interconnect@1740000 {
+        compatible = "qcom,sdm845-mmss-noc";
+        reg = <0x01740000 0x1c1000>;
+        #interconnect-cells = <1>;
+        qcom,bcm-voter-names = "apps", "disp";
+        qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
index 71cf7e252bfc..4b5e9f9b07ec 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
@@ -78,15 +78,15 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
 
     clk_virt: interconnect-0 {
-            compatible = "qcom,sdx75-clk-virt";
-            #interconnect-cells = <2>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
-            clocks = <&rpmhcc RPMH_QPIC_CLK>;
+        compatible = "qcom,sdx75-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&rpmhcc RPMH_QPIC_CLK>;
     };
 
     system_noc: interconnect@1640000 {
-            compatible = "qcom,sdx75-system-noc";
-            reg = <0x1640000 0x4b400>;
-            #interconnect-cells = <2>;
-            qcom,bcm-voters = <&apps_bcm_voter>;
+        compatible = "qcom,sdx75-system-noc";
+        reg = <0x1640000 0x4b400>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
deleted file mode 100644
index 5a4dd263fc12..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-TB10x Top Level Interrupt Controller
-====================================
-
-The Abilis TB10x SOC contains a custom interrupt controller. It performs
-one-to-one mapping of external interrupt sources to CPU interrupts and
-provides support for reconfigurable trigger modes.
-
-Required properties
--------------------
-
-- compatible: Should be "abilis,tb10x-ictl"
-- reg: specifies physical base address and size of register range.
-- interrupt-congroller: Identifies the node as an interrupt controller.
-- #interrupt cells: Specifies the number of cells used to encode an interrupt
-  source connected to this controller. The value shall be 2.
-- interrupts: Specifies the list of interrupt lines which are handled by
-  the interrupt controller in the parent controller's notation. Interrupts
-  are mapped one-to-one to parent interrupts.
-
-Example
--------
-
-intc: interrupt-controller {	/* Parent interrupt controller */
-	interrupt-controller;
-	#interrupt-cells = <1>;	/* For example below */
-	/* ... */
-};
-
-tb10x_ictl: pic@2000 {		/* TB10x interrupt controller */
-	compatible = "abilis,tb10x-ictl";
-	reg = <0x2000 0x20>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&intc>;
-	interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29 30 31>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml
new file mode 100644
index 000000000000..cd2c49670e7b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/abilis,tb10x-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TB10x Top Level Interrupt Controller
+
+maintainers:
+  - Christian Ruppert <christian.ruppert@abilis.com>
+
+description:
+  The Abilis TB10x SOC contains a custom interrupt controller. It performs
+  one-to-one mapping of external interrupt sources to CPU interrupts and
+  provides support for reconfigurable trigger modes.
+
+properties:
+  compatible:
+    const: abilis,tb10x-ictl
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: A one-to-one mapping of external interrupt sources to parent
+      interrupts.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@2000 {
+        compatible = "abilis,tb10x-ictl";
+        reg = <0x2000 0x20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <5>, <6>, <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>,
+                     <15>, <16>, <17>, <18>, <19>, <20>, <21>, <22>, <23>,
+                     <24>, <25>, <26>, <27>, <28>, <29>, <30>, <31>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
deleted file mode 100644
index 5669764f9cc9..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Alpine MSIX controller
-
-See arm,gic-v3.txt for SPI and MSI definitions.
-
-Required properties:
-
-- compatible: should be "al,alpine-msix"
-- reg: physical base address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- msi-controller: identifies the node as an PCI Message Signaled Interrupt
-		  controller
-- al,msi-base-spi: SPI base of the MSI frame
-- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
-
-Example:
-
-msix: msix {
-	compatible = "al,alpine-msix";
-	reg = <0x0 0xfbe00000 0x0 0x100000>;
-	interrupt-parent = <&gic>;
-	interrupt-controller;
-	msi-controller;
-	al,msi-base-spi = <160>;
-	al,msi-num-spis = <160>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml
new file mode 100644
index 000000000000..9f1ff8ec686f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/al,alpine-msix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alpine MSIX controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+properties:
+  compatible:
+    const: al,alpine-msix
+
+  reg:
+    maxItems: 1
+
+  interrupt-parent: true
+
+  msi-controller: true
+
+  al,msi-base-spi:
+    description: SPI base of the MSI frame
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  al,msi-num-spis:
+    description: number of SPIs assigned to the MSI frame, relative to SPI0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - al,msi-base-spi
+  - al,msi-num-spis
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@fbe00000 {
+        compatible = "al,alpine-msix";
+        reg = <0xfbe00000 0x100000>;
+        interrupt-parent = <&gic>;
+        msi-controller;
+        al,msi-base-spi = <160>;
+        al,msi-num-spis = <160>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/altr,msi-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
similarity index 94%
rename from Documentation/devicetree/bindings/pci/altr,msi-controller.yaml
rename to Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
index 98814862d006..d046954b8a27 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/altr,msi-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2015, 2024, Intel Corporation
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/altr,msi-controller.yaml#
+$id: http://devicetree.org/schemas/interrupt-controller/altr,msi-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Altera PCIe MSI controller
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
deleted file mode 100644
index c676b03c752e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Amazon's Annapurna Labs Fabric Interrupt Controller
-
-Required properties:
-
-- compatible: should be "amazon,al-fic"
-- reg: physical base address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells : must be 2. Specifies the number of cells needed to encode
-  an interrupt source. Supported trigger types are low-to-high edge
-  triggered and active high level-sensitive.
-- interrupts: describes which input line in the interrupt parent, this
-  fic's output is connected to. This field property depends on the parent's
-  binding
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
-amazon_fic: interrupt-controller@fd8a8500 {
-	compatible = "amazon,al-fic";
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	reg = <0x0 0xfd8a8500 0x0 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml
new file mode 100644
index 000000000000..26bc05dee0bc
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amazon,al-fic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon Annapurna Labs Fabric Interrupt Controller
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+
+properties:
+  compatible:
+    const: amazon,al-fic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@fd8a8500 {
+        compatible = "amazon,al-fic";
+        reg = <0xfd8a8500 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
deleted file mode 100644
index 386ab37a383f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* ARM Nested Vector Interrupt Controller (NVIC)
-
-The NVIC provides an interrupt controller that is tightly coupled to
-Cortex-M based processor cores.  The NVIC implemented on different SoCs
-vary in the number of interrupts and priority bits per interrupt.
-
-Main node required properties:
-
-- compatible : should be one of:
-	"arm,v6m-nvic"
-	"arm,v7m-nvic"
-	"arm,v8m-nvic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-  The 1st cell contains the interrupt number for the interrupt type.
-
-  The 2nd cell is the priority of the interrupt.
-
-- reg : Specifies base physical address(s) and size of the NVIC registers.
-  This is at a fixed address (0xe000e100) and size (0xc00).
-
-- arm,num-irq-priority-bits: The number of priority bits implemented by the
-  given SoC
-
-Example:
-
-	intc: interrupt-controller@e000e100 {
-		compatible = "arm,v7m-nvic";
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0xe000e100 0xc00>;
-		arm,num-irq-priority-bits = <4>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
new file mode 100644
index 000000000000..d89eca956c5f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Nested Vector Interrupt Controller (NVIC)
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  The NVIC provides an interrupt controller that is tightly coupled to Cortex-M
+  based processor cores.  The NVIC implemented on different SoCs vary in the
+  number of interrupts and priority bits per interrupt.
+
+properties:
+  compatible:
+    enum:
+      - arm,v6m-nvic
+      - arm,v7m-nvic
+      - arm,v8m-nvic
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      Number of cells to encode an interrupt source:
+      first = interrupt number, second = priority.
+
+  arm,num-irq-priority-bits:
+    description: Number of priority bits implemented by the SoC
+    minimum: 1
+    maximum: 8
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - arm,num-irq-priority-bits
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e000e100 {
+        compatible = "arm,v7m-nvic";
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        reg = <0xe000e100 0xc00>;
+        arm,num-irq-priority-bits = <4>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
deleted file mode 100644
index ea939f54c5eb..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* ARM Versatile FPGA interrupt controller
-
-One or more FPGA IRQ controllers can be synthesized in an ARM reference board
-such as the Integrator or Versatile family. The output of these different
-controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
-instance can handle up to 32 interrupts.
-
-Required properties:
-- compatible: "arm,versatile-fpga-irq"
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: The number of cells to define the interrupts.  Must be 1
-  as the FPGA IRQ controller has no configuration options for interrupt
-  sources.  The cell is a u32 and defines the interrupt number.
-- reg: The register bank for the FPGA interrupt controller.
-- clear-mask: a u32 number representing the mask written to clear all IRQs
-  on the controller at boot for example.
-- valid-mask: a u32 number representing a bit mask determining which of
-  the interrupts are valid. Unconnected/unused lines are set to 0, and
-  the system till not make it possible for devices to request these
-  interrupts.
-
-The "oxsemi,ox810se-rps-irq" compatible is deprecated.
-
-Example:
-
-pic: pic@14000000 {
-        compatible = "arm,versatile-fpga-irq";
-        #interrupt-cells = <1>;
-        interrupt-controller;
-        reg = <0x14000000 0x100>;
-        clear-mask = <0xffffffff>;
-        valid-mask = <0x003fffff>;
-};
-
-Optional properties:
-- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
-  output is simply connected to the input of another IRQ controller,
-  then the parent IRQ shall be specified in this property.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
new file mode 100644
index 000000000000..8d581b3aac3a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,versatile-fpga-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile FPGA IRQ Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+  such as the Integrator or Versatile family. The output of these different
+  controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+  instance can handle up to 32 interrupts.
+
+properties:
+  compatible:
+    const: arm,versatile-fpga-irq
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clear-mask:
+    description: A mask written to clear all IRQs on the controller at boot.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  valid-mask:
+    description:
+      A bit mask determining which interrupts are valid; unused lines are set to 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+  - reg
+  - clear-mask
+  - valid-mask
+
+examples:
+  - |
+    interrupt-controller@14000000 {
+        compatible = "arm,versatile-fpga-irq";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0x14000000 0x100>;
+        clear-mask = <0xffffffff>;
+        valid-mask = <0x003fffff>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
deleted file mode 100644
index 033cc82e5684..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device tree configuration for the I2C Interrupt Controller on the AST24XX and
-AST25XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells 		: should be 1
-- #interrupt-cells 	: should be 1
-- compatible 		: should be "aspeed,ast2400-i2c-ic"
-			  or "aspeed,ast2500-i2c-ic"
-- reg			: address start and range of controller
-- interrupts		: interrupt number
-- interrupt-controller	: denotes that the controller receives and fires
-			  new interrupts for child busses
-
-Example:
-
-i2c_ic: interrupt-controller@0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <1>;
-	compatible = "aspeed,ast2400-i2c-ic";
-	reg = <0x0 0x40>;
-	interrupts = <12>;
-	interrupt-controller;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml
new file mode 100644
index 000000000000..6cff6a7231bb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2400-i2c-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed I2C Interrupt Controller (AST24XX/AST25XX)
+
+maintainers:
+  - Ryan Chen <ryan_chen@aspeedtech.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-ic
+      - aspeed,ast2500-i2c-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@0 {
+        compatible = "aspeed,ast2400-i2c-ic";
+        reg = <0x0 0x40>;
+        #interrupt-cells = <1>;
+        interrupts = <12>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml
new file mode 100644
index 000000000000..d5287a2bf866
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Eddie James
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2500-scu-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed AST25XX and AST26XX SCU Interrupt Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-scu-ic
+      - aspeed,ast2600-scu-ic0
+      - aspeed,ast2600-scu-ic1
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@18 {
+        compatible = "aspeed,ast2500-scu-ic";
+        reg = <0x18 0x4>;
+        #interrupt-cells = <1>;
+        interrupts = <21>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
deleted file mode 100644
index 251ed44171db..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Aspeed AST25XX and AST26XX SCU Interrupt Controller
-
-Required Properties:
- - #interrupt-cells		: must be 1
- - compatible			: must be "aspeed,ast2500-scu-ic",
-				  "aspeed,ast2600-scu-ic0" or
-				  "aspeed,ast2600-scu-ic1"
- - interrupts			: interrupt from the parent controller
- - interrupt-controller		: indicates that the controller receives and
-				  fires new interrupts for child busses
-
-Example:
-
-    syscon@1e6e2000 {
-        ranges = <0 0x1e6e2000 0x1a8>;
-
-        scu_ic: interrupt-controller@18 {
-            #interrupt-cells = <1>;
-            compatible = "aspeed,ast2500-scu-ic";
-            interrupts = <21>;
-            interrupt-controller;
-        };
-    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
deleted file mode 100644
index bdd173056f72..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
-
-The BCM2835 contains a custom top-level interrupt controller, which supports
-72 interrupt sources using a 2-level register scheme. The interrupt
-controller, or the HW block containing it, is referred to occasionally
-as "armctrl" in the SoC documentation, hence naming of this binding.
-
-The BCM2836 contains the same interrupt controller with the same
-interrupts, but the per-CPU interrupt controller is the root, and an
-interrupt there indicates that the ARMCTRL has an interrupt to handle.
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
-  pending" register, or 1/2 respectively for interrupts in the "IRQ pending
-  1/2" register.
-
-  The 2nd cell contains the interrupt number within the bank. Valid values
-  are 0..7 for bank 0, and 0..31 for bank 1.
-
-Additional required properties for brcm,bcm2836-armctrl-ic:
-- interrupts : Specifies the interrupt on the parent for this interrupt
-  controller to handle.
-
-The interrupt sources are as follows:
-
-Bank 0:
-0: ARM_TIMER
-1: ARM_MAILBOX
-2: ARM_DOORBELL_0
-3: ARM_DOORBELL_1
-4: VPU0_HALTED
-5: VPU1_HALTED
-6: ILLEGAL_TYPE0
-7: ILLEGAL_TYPE1
-
-Bank 1:
-0: TIMER0
-1: TIMER1
-2: TIMER2
-3: TIMER3
-4: CODEC0
-5: CODEC1
-6: CODEC2
-7: VC_JPEG
-8: ISP
-9: VC_USB
-10: VC_3D
-11: TRANSPOSER
-12: MULTICORESYNC0
-13: MULTICORESYNC1
-14: MULTICORESYNC2
-15: MULTICORESYNC3
-16: DMA0
-17: DMA1
-18: VC_DMA2
-19: VC_DMA3
-20: DMA4
-21: DMA5
-22: DMA6
-23: DMA7
-24: DMA8
-25: DMA9
-26: DMA10
-27: DMA11-14 - shared interrupt for DMA 11 to 14
-28: DMAALL - triggers on all dma interrupts (including channel 15)
-29: AUX
-30: ARM
-31: VPUDMA
-
-Bank 2:
-0: HOSTPORT
-1: VIDEOSCALER
-2: CCP2TX
-3: SDC
-4: DSI0
-5: AVE
-6: CAM0
-7: CAM1
-8: HDMI0
-9: HDMI1
-10: PIXELVALVE1
-11: I2CSPISLV
-12: DSI1
-13: PWA0
-14: PWA1
-15: CPR
-16: SMI
-17: GPIO0
-18: GPIO1
-19: GPIO2
-20: GPIO3
-21: VC_I2C
-22: VC_SPI
-23: VC_I2SPCM
-24: VC_SDIO
-25: VC_UART
-26: SLIMBUS
-27: VEC
-28: CPG
-29: RNG
-30: VC_ARASANSDIO
-31: AVSPMON
-
-Example:
-
-/* BCM2835, first level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2835-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-/* BCM2836, second level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml
new file mode 100644
index 000000000000..625eb22bedf0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml
@@ -0,0 +1,162 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 ARMCTRL Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: >
+  The BCM2835 contains a custom top-level interrupt controller, which supports
+  72 interrupt sources using a 2-level register scheme. The interrupt
+  controller, or the HW block containing it, is referred to occasionally as
+  "armctrl" in the SoC documentation, hence naming of this binding.
+
+  The BCM2836 contains the same interrupt controller with the same interrupts,
+  but the per-CPU interrupt controller is the root, and an interrupt there
+  indicates that the ARMCTRL has an interrupt to handle.
+
+  The interrupt sources are as follows:
+
+  Bank 0:
+    0: ARM_TIMER
+    1: ARM_MAILBOX
+    2: ARM_DOORBELL_0
+    3: ARM_DOORBELL_1
+    4: VPU0_HALTED
+    5: VPU1_HALTED
+    6: ILLEGAL_TYPE0
+    7: ILLEGAL_TYPE1
+
+  Bank 1:
+    0: TIMER0
+    1: TIMER1
+    2: TIMER2
+    3: TIMER3
+    4: CODEC0
+    5: CODEC1
+    6: CODEC2
+    7: VC_JPEG
+    8: ISP
+    9: VC_USB
+    10: VC_3D
+    11: TRANSPOSER
+    12: MULTICORESYNC0
+    13: MULTICORESYNC1
+    14: MULTICORESYNC2
+    15: MULTICORESYNC3
+    16: DMA0
+    17: DMA1
+    18: VC_DMA2
+    19: VC_DMA3
+    20: DMA4
+    21: DMA5
+    22: DMA6
+    23: DMA7
+    24: DMA8
+    25: DMA9
+    26: DMA10
+    27: DMA11-14 - shared interrupt for DMA 11 to 14
+    28: DMAALL - triggers on all dma interrupts (including channel 15)
+    29: AUX
+    30: ARM
+    31: VPUDMA
+
+  Bank 2:
+    0: HOSTPORT
+    1: VIDEOSCALER
+    2: CCP2TX
+    3: SDC
+    4: DSI0
+    5: AVE
+    6: CAM0
+    7: CAM1
+    8: HDMI0
+    9: HDMI1
+    10: PIXELVALVE1
+    11: I2CSPISLV
+    12: DSI1
+    13: PWA0
+    14: PWA1
+    15: CPR
+    16: SMI
+    17: GPIO0
+    18: GPIO1
+    19: GPIO2
+    20: GPIO3
+    21: VC_I2C
+    22: VC_SPI
+    23: VC_I2SPCM
+    24: VC_SDIO
+    25: VC_UART
+    26: SLIMBUS
+    27: VEC
+    28: CPG
+    29: RNG
+    30: VC_ARASANSDIO
+    31: AVSPMON
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-armctrl-ic
+      - brcm,bcm2836-armctrl-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: >
+      The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+      pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+      1/2" register.
+
+      The 2nd cell contains the interrupt number within the bank. Valid values
+      are 0..7 for bank 0, and 0..31 for bank 1.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2836-armctrl-ic
+    then:
+      required:
+        - interrupts
+    else:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@7e00b200 {
+        compatible = "brcm,bcm2835-armctrl-ic";
+        reg = <0x7e00b200 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+  - |
+    interrupt-controller@7e00b200 {
+        compatible = "brcm,bcm2836-armctrl-ic";
+        reg = <0x7e00b200 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <8>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
deleted file mode 100644
index 2bc19b1ac877..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Broadcom BCM6345-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.
-
-Key elements of the hardware design include:
-
-- 32, 64 or 128 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Contains one or more enable/status word pairs per CPU
-
-- No atomic set/clear operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-4 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-The driver operates in native CPU endian by default, there is no support for
-specifying an alternative endianness.
-
-Example:
-
-periph_intc: interrupt-controller@10000000 {
-        compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
-        reg = <0x10000020 0x20>,
-              <0x10000040 0x20>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
new file mode 100644
index 000000000000..ca6a2ff43acd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm6345-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345-style Level 1 interrupt controller
+
+maintainers:
+  - Simon Arlott <simon@octiron.net>
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.
+
+  Key elements of the hardware design include:
+
+    - 32, 64 or 128 incoming level IRQ lines
+
+    - Most onchip peripherals are wired directly to an L1 input
+
+    - A separate instance of the register set for each CPU, allowing individual
+      peripheral IRQs to be routed to any CPU
+
+    - Contains one or more enable/status word pairs per CPU
+
+    - No atomic set/clear operations
+
+    - No polarity/level/edge settings
+
+    - No FIFO or priority encoder logic; software is expected to read all
+      2-4 status words to determine which IRQs are pending
+
+  If multiple reg ranges and interrupt-parent entries are present on an SMP
+  system, the driver will allow IRQ SMP affinity to be set up through the
+  /proc/irq/ interface.  In the simplest possible configuration, only one
+  reg range and one interrupt-parent is needed.
+
+  The driver operates in native CPU endian by default, there is no support for
+  specifying an alternative endianness.
+
+properties:
+  compatible:
+    const: brcm,bcm6345-l1-intc
+
+  reg:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@10000000 {
+        compatible = "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupts = <2>, <3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
deleted file mode 100644
index d4de980e55fa..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-mx".
-
-Remaining properties have exact same meaning as in Xtensa PIC
-(see cdns,xtensa-pic.txt).
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-mx";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
deleted file mode 100644
index 026ef4cfc1d5..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Xtensa built-in Programmable Interrupt Controller (PIC)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-pic".
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts.
-  It may be either 1 or 2.
-  When it's 1, the first cell is the internal IRQ number.
-  When it's 2, the first cell is the IRQ number, and the second cell
-  specifies whether it's internal (0) or external (1).
-  Periferals are usually connected to a fixed external IRQ, but for different
-  core variants it may be mapped to different internal IRQ.
-  IRQ sensitivity and priority are fixed for each core variant and may not be
-  changed at runtime.
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-pic";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml
new file mode 100644
index 000000000000..6773207fee01
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Max Filippov <jcmvbkbc@gmail.com>
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cdns,xtensa-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xtensa Interrupt Controllers
+
+maintainers:
+  - Max Filippov <jcmvbkbc@gmail.com>
+
+description:
+  Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX) and
+  Xtensa built-in Programmable Interrupt Controller (PIC)
+
+properties:
+  compatible:
+    enum:
+      - cdns,xtensa-mx
+      - cdns,xtensa-pic
+
+  '#interrupt-cells':
+    enum: [ 1, 2 ]
+    description:
+      Number of cells to define the interrupts. When 1, the first cell is the
+      internal IRQ number; when 2, the second cell specifies internal (0) or
+      external (1).
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "cdns,xtensa-pic";
+        /* one cell: internal irq number,
+         * two cells: second cell == 0: internal irq number
+         *            second cell == 1: external irq number
+         */
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
new file mode 100644
index 000000000000..f0d9bbd7d510
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/chrp,open-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open PIC Interrupt Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This binding specifies what properties must be available in the device tree
+  representation of an Open PIC compliant interrupt controller.  This binding is
+  based on the binding defined for Open PIC in [1] and is a superset of that
+  binding.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,mpic
+          - const: chrp,open-pic
+      - const: chrp,open-pic
+
+  device_type:
+    const: open-pci
+    deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells':
+    const: 2
+
+  pic-no-reset:
+    description: Indicates the PIC shall not be reset during runtime initialization.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#address-cells'
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@40000 {
+        compatible = "chrp,open-pic";
+        reg = <0x40000 0x40000>;
+        interrupt-controller;
+        #address-cells = <0>;
+        #interrupt-cells = <2>;
+        pic-no-reset;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
deleted file mode 100644
index 969b4582ec60..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Cirrus Logic CLPS711X Interrupt Controller
-
-Required properties:
-
-- compatible: Should be "cirrus,ep7209-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-The interrupt sources are as follows:
-ID	Name	Description
----------------------------
-1:	BLINT	Battery low (FIQ)
-3:	MCINT	Media changed (FIQ)
-4:	CSINT	CODEC sound
-5:	EINT1	External 1
-6:	EINT2	External 2
-7:	EINT3	External 3
-8:	TC1OI	TC1 under flow
-9:	TC2OI	TC2 under flow
-10:	RTCMI	RTC compare match
-11:	TINT	64Hz tick
-12:	UTXINT1	UART1 transmit FIFO half empty
-13:	URXINT1	UART1 receive FIFO half full
-14:	UMSINT	UART1 modem status changed
-15:	SSEOTI	SSI1 end of transfer
-16:	KBDINT	Keyboard
-17:	SS2RX	SSI2 receive FIFO half or greater full
-18:	SS2TX	SSI2 transmit FIFO less than half empty
-28:	UTXINT2	UART2 transmit FIFO half empty
-29:	URXINT2	UART2 receive FIFO half full
-32:	DAIINT	DAI interface (FIQ)
-
-Example:
-	intc: interrupt-controller {
-		compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
-		reg = <0x80000000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml
new file mode 100644
index 000000000000..d3cc49d29e10
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cirrus,ep7209-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Interrupt Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: >
+  Cirrus Logic CLPS711X Interrupt Controller
+
+  The interrupt sources are as follows:
+    ID	Name	Description
+    ---------------------------
+    1:	BLINT	Battery low (FIQ)
+    3:	MCINT	Media changed (FIQ)
+    4:	CSINT	CODEC sound
+    5:	EINT1	External 1
+    6:	EINT2	External 2
+    7:	EINT3	External 3
+    8:	TC1OI	TC1 under flow
+    9:	TC2OI	TC2 under flow
+    10:	RTCMI	RTC compare match
+    11:	TINT	64Hz tick
+    12:	UTXINT1	UART1 transmit FIFO half empty
+    13:	URXINT1	UART1 receive FIFO half full
+    14:	UMSINT	UART1 modem status changed
+    15:	SSEOTI	SSI1 end of transfer
+    16:	KBDINT	Keyboard
+    17:	SS2RX	SSI2 receive FIFO half or greater full
+    18:	SS2TX	SSI2 transmit FIFO less than half empty
+    28:	UTXINT2	UART2 transmit FIFO half empty
+    29:	URXINT2	UART2 receive FIFO half full
+    32:	DAIINT	DAI interface (FIQ)
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cirrus,ep7312-intc
+          - const: cirrus,ep7209-intc
+      - items:
+          - const: cirrus,ep7209-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80000000 {
+        compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
+        reg = <0x80000000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml
new file mode 100644
index 000000000000..3f016cf47812
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cnxt,cx92755-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Conexant Digicolor Interrupt Controller
+
+maintainers:
+  - Baruch Siach <baruch@tkos.co.il>
+
+description: Conexant Digicolor Interrupt Controller
+
+properties:
+  compatible:
+    const: cnxt,cx92755-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  syscon:
+    description: A phandle to the syscon node describing UC registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@f0000040 {
+        compatible = "cnxt,cx92755-ic";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xf0000040 0x40>;
+        syscon = <&uc_regs>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
deleted file mode 100644
index 44286dcbac62..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-==============================
-C-SKY APB Interrupt Controller
-==============================
-
-C-SKY APB Interrupt Controller is a simple soc interrupt controller
-on the apb bus and we only use it as root irq controller.
-
- - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
- - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
- - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
-
-=============================
-intc node bindings definition
-=============================
-
-	Description: Describes APB interrupt controller
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,apb-intc"
-				    "csky,dual-apb-intc"
-				    "csky,gx6605s-intc"
-	- #interrupt-cells
-		Usage: required
-		Value type: <u32>
-		Definition: must be <1>
-	- reg
-		Usage: required
-		Value type: <u32 u32>
-		Definition: <phyaddr size> in soc from cpu view
-	- interrupt-controller:
-		Usage: required
-	- csky,support-pulse-signal:
-		Usage: select
-		Description: to support pulse signal flag
-
-Examples:
----------
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,dual-apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,gx6605s-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml
new file mode 100644
index 000000000000..902648ead975
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/csky,apb-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: C-SKY APB Interrupt Controller
+
+maintainers:
+  - Guo Ren <guoren@kernel.org>
+
+description: >
+  C-SKY APB Interrupt Controller is a simple soc interrupt controller on the apb
+  bus and we only use it as root irq controller.
+
+    - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
+    - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
+    - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
+
+properties:
+  compatible:
+    enum:
+      - csky,apb-intc
+      - csky,dual-apb-intc
+      - csky,gx6605s-intc
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  csky,support-pulse-signal:
+    type: boolean
+    description: Support for pulse signal flag.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    intc: interrupt-controller@500000 {
+        compatible = "csky,apb-intc";
+        #interrupt-cells = <1>;
+        reg = <0x00500000 0x400>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
deleted file mode 100644
index e6bbcae4d07f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-===========================================
-C-SKY Multi-processors Interrupt Controller
-===========================================
-
-C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
-SMP soc, and it also could be used in non-SMP system.
-
-Interrupt number definition:
-  0-15  : software irq, and we use 15 as our IPI_IRQ.
- 16-31  : private  irq, and we use 16 as the co-processor timer.
- 31-1024: common irq for soc ip.
-
-Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
- IRQ_TYPE_LEVEL_HIGH (default)
- IRQ_TYPE_LEVEL_LOW
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
-
-=============================
-intc node bindings definition
-=============================
-
-	Description: Describes SMP interrupt controller
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,mpintc"
-	- #interrupt-cells
-		Usage: required
-		Value type: <u32>
-		Definition: <2>
-	- interrupt-controller:
-		Usage: required
-
-Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
----------
-#include <dt-bindings/interrupt-controller/irq.h>
-
-	intc: interrupt-controller {
-		compatible = "csky,mpintc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	device: device-example {
-		...
-		interrupts = <34 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&intc>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml
new file mode 100644
index 000000000000..3df7739e31c4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/csky,mpintc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: C-SKY Multi-processors Interrupt Controller
+
+maintainers:
+  - Guo Ren <guoren@kernel.org>
+
+description: >
+  C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
+  SMP soc, and it also could be used in non-SMP system.
+
+  Interrupt number definition:
+    0-15  : software irq, and we use 15 as our IPI_IRQ.
+    16-31  : private  irq, and we use 16 as the co-processor timer.
+    31-1024: common irq for soc ip.
+
+properties:
+  compatible:
+    const: csky,mpintc
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "csky,mpintc";
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
deleted file mode 100644
index 42d41ec84c7b..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Conexant Digicolor Interrupt Controller
-
-Required properties:
-
-- compatible : should be "cnxt,cx92755-ic"
-- reg : Specifies base physical address and size of the interrupt controller
-  registers (IC) area
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- syscon: A phandle to the syscon node describing UC registers
-
-Example:
-
-	intc: interrupt-controller@f0000040 {
-		compatible = "cnxt,cx92755-ic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf0000040 0x40>;
-		syscon = <&uc_regs>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
new file mode 100644
index 000000000000..5536319c49c3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/econet,en751221-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EcoNet EN751221 Interrupt Controller
+
+maintainers:
+  - Caleb James DeLisle <cjd@cjdns.fr>
+
+description:
+  The EcoNet EN751221 Interrupt Controller is a simple interrupt controller
+  designed for the MIPS 34Kc MT SMP processor with 2 VPEs. Each interrupt can
+  be routed to either VPE but not both, so to support per-CPU interrupts, a
+  secondary IRQ number is allocated to control masking/unmasking on VPE#1. For
+  lack of a better term we call these "shadow interrupts". The assignment of
+  shadow interrupts is defined by the SoC integrator when wiring the interrupt
+  lines, so they are configurable in the device tree.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: econet,en751221-intc
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line connecting this controller to its parent.
+
+  econet,shadow-interrupts:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description:
+      An array of interrupt number pairs where each pair represents a shadow
+      interrupt relationship. The first number in each pair is the primary IRQ,
+      and the second is its shadow IRQ used for VPE#1 control. For example,
+      <8 3> means IRQ 8 is shadowed by IRQ 3, so IRQ 3 cannot be mapped, but
+      when VPE#1 requests IRQ 8, it will manipulate the IRQ 3 mask bit.
+    minItems: 1
+    maxItems: 20
+    items:
+      items:
+        - description: primary per-CPU IRQ
+        - description: shadow IRQ number
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1fb40000 {
+        compatible = "econet,en751221-intc";
+        reg = <0x1fb40000 0x100>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <2>;
+
+        econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
deleted file mode 100644
index 888b2b9f7064..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-EZchip NPS Interrupt Controller
-
-Required properties:
-
-- compatible : should be "ezchip,nps400-ic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-
-Example:
-
-intc: interrupt-controller {
-	compatible = "ezchip,nps400-ic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml
new file mode 100644
index 000000000000..589c6ebf6c1a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ezchip,nps400-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EZchip NPS Interrupt Controller
+
+maintainers:
+  - Noam Camus <noamc@ezchip.com>
+
+properties:
+  compatible:
+    const: ezchip,nps400-ic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "ezchip,nps400-ic";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
deleted file mode 100644
index 24428d47f487..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Faraday Technologt FTINTC010 interrupt controller
-
-This interrupt controller is a stock IP block from Faraday Technology found
-in the Gemini SoCs and other designs.
-
-Required properties:
-- compatible: must be one of
-  "faraday,ftintc010"
-  "cortina,gemini-interrupt-controller" (deprecated)
-- reg: The register bank for the interrupt controller.
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: The number of cells to define the interrupts.
-  Must be 2 as the controller can specify level or rising edge
-  IRQs. The bindings follows the standard binding for controllers
-  with two cells specified in
-  interrupt-controller/interrupts.txt
-
-Example:
-
-interrupt-controller@48000000 {
-	compatible = "faraday,ftintc010"
-	reg = <0x48000000 0x1000>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
new file mode 100644
index 000000000000..980e5c45f25b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/interrupt-controller/faraday,ftintc010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTINTC010 interrupt controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This interrupt controller is a stock IP block from Faraday Technology found
+  in the Gemini SoCs and other designs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: moxa,moxart-ic
+          - const: faraday,ftintc010
+      - enum:
+          - faraday,ftintc010
+          - cortina,gemini-interrupt-controller
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48000000 {
+        compatible = "faraday,ftintc010";
+        reg = <0x48000000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml
new file mode 100644
index 000000000000..5f2c8761a31d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,tzic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale tzic Interrupt controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx51-tzic
+              - fsl,imx53-tzic
+          - const: fsl,tzic
+      - items:
+          - const: fsl,imx50-tzic
+          - const: fsl,imx53-tzic
+          - const: fsl,tzic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    tz-interrupt-controller@fffc000 {
+        compatible = "fsl,imx53-tzic", "fsl,tzic";
+        reg = <0x0fffc000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
deleted file mode 100644
index 35f752706e7d..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Android Goldfish PIC
-
-Android Goldfish programmable interrupt device used by Android
-emulator.
-
-Required properties:
-
-- compatible : should contain "google,goldfish-pic"
-- reg        : <registers mapping>
-- interrupts : <interrupt mapping>
-
-Example for mips when used in cascade mode:
-
-        cpuintc {
-                #interrupt-cells = <0x1>;
-                #address-cells = <0>;
-                interrupt-controller;
-                compatible = "mti,cpu-interrupt-controller";
-        };
-
-        interrupt-controller@1f000000 {
-                compatible = "google,goldfish-pic";
-                reg = <0x1f000000 0x1000>;
-
-                interrupt-controller;
-                #interrupt-cells = <0x1>;
-
-                interrupt-parent = <&cpuintc>;
-                interrupts = <0x2>;
-        };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml
new file mode 100644
index 000000000000..ac3c3c3ca186
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/google,goldfish-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Android Goldfish PIC
+
+maintainers:
+  - Miodrag Dinic <miodrag.dinic@mips.com>
+
+description:
+  Android Goldfish programmable interrupt device used by Android emulator.
+
+properties:
+  compatible:
+    const: google,goldfish-pic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    interrupt-controller@1f000000 {
+        compatible = "google,goldfish-pic";
+        reg = <0x1f000000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <2>;
+    };
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
deleted file mode 100644
index 5dc2a55ad811..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a PDC IRQ controller. This has a number of input interrupt
-lines which can wake the system, and are passed on through output interrupt
-lines.
-
-Required properties:
-
-    - compatible: Specifies the compatibility list for the interrupt controller.
-      The type shall be <string> and the value shall include "img,pdc-intc".
-
-    - reg: Specifies the base PDC physical address(s) and size(s) of the
-      addressable register space. The type shall be <prop-encoded-array>.
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an interrupt controller. No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source. The type shall be a <u32> and the value shall be 2.
-
-    - num-perips: Number of waking peripherals.
-
-    - num-syswakes: Number of SysWake inputs.
-
-    - interrupts: List of interrupt specifiers. The first specifier shall be the
-      shared SysWake interrupt, and remaining specifies shall be PDC peripheral
-      interrupts in order.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-                    0-7:  Peripheral interrupts
-                    8-15: SysWake interrupts
-
-    - <2nd-cell>: The level-sense information, encoded using the Linux interrupt
-                  flags as follows (only 4 valid for peripheral interrupts):
-                    0 = none (decided by software)
-                    1 = low-to-high edge triggered
-                    2 = high-to-low edge triggered
-                    3 = both edge triggered
-                    4 = active-high level-sensitive (required for perip irqs)
-                    8 = active-low level-sensitive
-
-* Examples
-
-Example 1:
-
-	/*
-	 * TZ1090 PDC block
-	 */
-	pdc: pdc@02006000 {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// Three cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Offset address of 0x02006000 and size of 0x1000.
-		reg = <0x02006000 0x1000>;
-
-		// Compatible with Meta hardware trigger block.
-		compatible = "img,pdc-intc";
-
-		// Three peripherals are connected.
-		num-perips = <3>;
-
-		// Four SysWakes are connected.
-		num-syswakes = <4>;
-
-		interrupts = <18 4 /* level */>, /* Syswakes */
-			     <30 4 /* level */>, /* Peripheral 0 (RTC) */
-			     <29 4 /* level */>, /* Peripheral 1 (IR) */
-			     <31 4 /* level */>; /* Peripheral 2 (WDT) */
-	};
-
-Example 2:
-
-	/*
-	 * An SoC peripheral that is wired through the PDC.
-	 */
-	rtc0 {
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&pdc>;
-
-		// Interrupt source Peripheral 0
-		interrupts = <0   /* Peripheral 0 (RTC) */
-		              4>  /* IRQ_TYPE_LEVEL_HIGH */
-	};
-
-Example 3:
-
-	/*
-	 * An interrupt generating device that is wired to a SysWake pin.
-	 */
-	touchscreen0 {
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&pdc>;
-
-		// Interrupt source SysWake 0 that is active-low level-sensitive
-		interrupts = <8 /* SysWake0 */
-			      8 /* IRQ_TYPE_LEVEL_LOW */>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml
new file mode 100644
index 000000000000..99e7a4281595
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/img,pdc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ImgTec Powerdown Controller (PDC) Interrupt Controller
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+description:
+  ImgTec Powerdown Controller (PDC) Interrupt Controller has a number of input
+  interrupt lines which can wake the system, and are passed on through output
+  interrupt lines.
+
+properties:
+  compatible:
+    const: img,pdc-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: >
+      <1st-cell>: The interrupt-number that identifies the interrupt source.
+        0-7:  Peripheral interrupts
+        8-15: SysWake interrupts
+
+      <2nd-cell>: The level-sense information, encoded using the Linux interrupt
+        flags as follows (only 4 valid for peripheral interrupts):
+        0 = none (decided by software)
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        3 = both edge triggered
+        4 = active-high level-sensitive (required for perip irqs)
+        8 = active-low level-sensitive
+    const: 2
+
+  num-perips:
+    description: Number of waking peripherals
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  num-syswakes:
+    description: Number of SysWake inputs
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  interrupts:
+    description:
+      First entry is syswake IRQ. Subsequent entries are 1 per peripheral.
+    minItems: 2
+    maxItems: 9
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - num-perips
+  - num-syswakes
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@2006000 {
+        compatible = "img,pdc-intc";
+        reg = <0x02006000 0x1000>;
+        interrupts = <18 4>, <30 4>, <29 4>, <31 4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        num-perips = <3>;
+        num-syswakes = <4>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
deleted file mode 100644
index ee2ad36f8df8..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-J-Core Advanced Interrupt Controller
-
-Required properties:
-
-- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
-  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
-  the "aic2" core with 64 interrupts.
-
-- reg: Memory region(s) for configuration. For SMP, there should be one
-  region per cpu, indexed by the sequential, zero-based hardware cpu
-  number.
-
-- interrupt-controller: Identifies the node as an interrupt controller
-
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-
-Example:
-
-aic: interrupt-controller@200 {
-	compatible = "jcore,aic2";
-	reg = < 0x200 0x30 0x500 0x30 >;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml
new file mode 100644
index 000000000000..df8abc24591c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/jcore,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: J-Core Advanced Interrupt Controller
+
+maintainers:
+  - Rich Felker <dalias@libc.org>
+
+properties:
+  compatible:
+    enum:
+      - jcore,aic1
+      - jcore,aic2
+
+  reg:
+    description: Memory region(s) for configuration. For SMP, there should be one
+      region per CPU, indexed by the sequential, zero-based hardware CPU number.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aic: interrupt-controller@200 {
+        compatible = "jcore,aic2";
+        reg = <0x200 0x30>, <0x500 0x30>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
deleted file mode 100644
index aee38e7c13e7..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-TI-NSPIRE interrupt controller
-
-Required properties:
-- compatible: Compatible property value should be "lsi,zevio-intc".
-
-- reg: Physical base address of the controller and length of memory mapped
-	region.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-
-Example:
-
-interrupt-controller {
-	compatible = "lsi,zevio-intc";
-	interrupt-controller;
-	reg = <0xDC000000 0x1000>;
-	#interrupt-cells = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml
new file mode 100644
index 000000000000..e66b25f579c3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Daniel Tang <dt.tangr@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/lsi,zevio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Interrupt Controller
+
+maintainers:
+  - Daniel Tang <dt.tangr@gmail.com>
+
+description: |
+  TI-NSPIRE interrupt controller
+
+properties:
+  compatible:
+    const: lsi,zevio-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@dc000000 {
+        compatible = "lsi,zevio-intc";
+        interrupt-controller;
+        reg = <0xdc000000 0x1000>;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml
new file mode 100644
index 000000000000..5faedd95b9a9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,ap806-gicp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell GICP Controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+description:
+  GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
+  interrupts by doing a memory transaction. It is used by the ICU
+  located in the Marvell CP110 to turn wired interrupts inside the CP
+  into GIC SPI interrupts.
+
+properties:
+  compatible:
+    const: marvell,ap806-gicp
+
+  reg:
+    maxItems: 1
+
+  marvell,spi-ranges:
+    description: Tuples of GIC SPI interrupt ranges available for this GICP
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: SPI interrupt base
+        - description: Number of interrupts in the range
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - marvell,spi-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@3f0040 {
+        compatible = "marvell,ap806-gicp";
+        reg = <0x3f0040 0x10>;
+        marvell,spi-ranges = <64 64>, <288 64>;
+        msi-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
new file mode 100644
index 000000000000..e812f9a86307
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,ap806-sei.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SEI (System Error Interrupt) Controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  Marvell SEI (System Error Interrupt) controller is an interrupt aggregator. It
+  receives interrupts from several sources and aggregates them to a single
+  interrupt line (an SPI) on the parent interrupt controller.
+
+  This interrupt controller can handle up to 64 SEIs, a set comes from the AP
+  and is wired while a second set comes from the CPs by the mean of MSIs.
+
+properties:
+  compatible:
+    const: marvell,ap806-sei
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - msi-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3f0200 {
+        compatible = "marvell,ap806-sei";
+        reg = <0x3f0200 0x40>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        msi-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
deleted file mode 100644
index 86a7b4cd03f5..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Armada 7K/8K PIC Interrupt controller
----------------------------------------------
-
-This is the Device Tree binding for the PIC, a secondary interrupt
-controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
-typically connected to the GIC as the primary interrupt controller.
-
-Required properties:
-- compatible: should be "marvell,armada-8k-pic"
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: the number of cells to define interrupts on this
-  controller. Should be 1
-- reg: the register area for the PIC interrupt controller
-- interrupts: the interrupt to the primary interrupt controller,
-  typically the GIC
-
-Example:
-
-	pic: interrupt-controller@3f0100 {
-		compatible = "marvell,armada-8k-pic";
-		reg = <0x3f0100 0x10>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml
new file mode 100644
index 000000000000..5a455f7353db
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,armada-8k-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K PIC Interrupt controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+description:
+  The Marvell Armada 7K/8K PIC is a secondary interrupt controller available on
+  the Marvell Armada 7K/8K ARM64 SoCs, and typically connected to the GIC as the
+  primary interrupt controller.
+
+properties:
+  compatible:
+    const: marvell,armada-8k-pic
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt to the primary interrupt controller (GIC).
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3f0100 {
+        compatible = "marvell,armada-8k-pic";
+        reg = <0x3f0100 0x10>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
new file mode 100644
index 000000000000..9d4f06f45372
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,cp110-icu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+title: Marvell ICU Interrupt Controller
+
+description:
+  The Marvell ICU (Interrupt Consolidation Unit) controller is responsible for
+  collecting all wired-interrupt sources in the CP and communicating them to the
+  GIC in the AP. The unit translates interrupt requests on input wires to MSG
+  memory mapped transactions to the GIC. These messages access different GIC
+  memory areas depending on their type (NSR, SR, SEI, REI, etc).
+
+properties:
+  compatible:
+    const: marvell,cp110-icu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@":
+    type: object
+    description: Interrupt group child nodes
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - marvell,cp110-icu-nsr
+          - marvell,cp110-icu-sr
+          - marvell,cp110-icu-sei
+          - marvell,cp110-icu-rei
+
+      reg:
+        maxItems: 1
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupt-controller: true
+
+      msi-parent:
+        maxItems: 1
+        description: Phandle to the GICP controller
+
+    required:
+      - compatible
+      - reg
+      - '#interrupt-cells'
+      - interrupt-controller
+      - msi-parent
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1e0000 {
+        compatible = "marvell,cp110-icu";
+        reg = <0x1e0000 0x440>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@10 {
+                compatible = "marvell,cp110-icu-nsr";
+                reg = <0x10 0x20>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&gicp>;
+        };
+
+        interrupt-controller@50 {
+                compatible = "marvell,cp110-icu-sei";
+                reg = <0x50 0x10>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&sei>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
deleted file mode 100644
index 64a00ceb7da4..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell GICP Controller
------------------------
-
-GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
-interrupts by doing a memory transaction. It is used by the ICU
-located in the Marvell CP110 to turn wired interrupts inside the CP
-into GIC SPI interrupts.
-
-Required properties:
-
-- compatible: Must be "marvell,ap806-gicp"
-
-- reg: Must be the address and size of the GICP SPI registers
-
-- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available
-  for this GICP
-
-- msi-controller: indicates that this is an MSI controller
-
-Example:
-
-gicp_spi: gicp-spi@3f0040 {
-	compatible = "marvell,ap806-gicp";
-	reg = <0x3f0040 0x10>;
-	marvell,spi-ranges = <64 64>, <288 64>;
-	msi-controller;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
deleted file mode 100644
index 1c94a57a661e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Marvell ICU Interrupt Controller
---------------------------------
-
-The Marvell ICU (Interrupt Consolidation Unit) controller is
-responsible for collecting all wired-interrupt sources in the CP and
-communicating them to the GIC in the AP, the unit translates interrupt
-requests on input wires to MSG memory mapped transactions to the GIC.
-These messages will access a different GIC memory area depending on
-their type (NSR, SR, SEI, REI, etc).
-
-Required properties:
-
-- compatible: Should be "marvell,cp110-icu"
-
-- reg: Should contain ICU registers location and length.
-
-Subnodes: Each group of interrupt is declared as a subnode of the ICU,
-with their own compatible.
-
-Required properties for the icu_nsr/icu_sei subnodes:
-
-- compatible: Should be one of:
-              * "marvell,cp110-icu-nsr"
-	      * "marvell,cp110-icu-sr"
-	      * "marvell,cp110-icu-sei"
-	      * "marvell,cp110-icu-rei"
-
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the index of the interrupt in the ICU unit.
-
-  The 2nd cell is the type of the interrupt. See arm,gic.txt for
-  details.
-
-- interrupt-controller: Identifies the node as an interrupt
-  controller.
-
-- msi-parent: Should point to the GICP controller, the GIC extension
-  that allows to trigger interrupts using MSG memory mapped
-  transactions.
-
-Note: each 'interrupts' property referring to any 'icu_xxx' node shall
-      have a different number within [0:206].
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	CP110_LABEL(icu_nsr): interrupt-controller@10 {
-		compatible = "marvell,cp110-icu-nsr";
-		reg = <0x10 0x20>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&gicp>;
-	};
-
-	CP110_LABEL(icu_sei): interrupt-controller@50 {
-		compatible = "marvell,cp110-icu-sei";
-		reg = <0x50 0x10>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&sei>;
-	};
-};
-
-node1 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-node2 {
-	interrupt-parent = <&icu_sei>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/* Would not work with the above nodes */
-node3 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-The legacy bindings were different in this way:
-
-- #interrupt-cells: The value was 3.
-	The 1st cell was the group type of the ICU interrupt. Possible
-	group types were:
-	ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
-	ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
-	ICU_GRP_SEI (0x4) : System error interrupt
-	ICU_GRP_REI (0x5) : RAM error interrupt
-	The 2nd cell was the index of the interrupt in the ICU unit.
-	The 3rd cell was the type of the interrupt. See arm,gic.txt for
-	details.
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	#interrupt-cells = <3>;
-	interrupt-controller;
-	msi-parent = <&gicp>;
-};
-
-node1 {
-	interrupt-parent = <&icu>;
-	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
deleted file mode 100644
index 0ebfc952cb34..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-
-* Marvell ODMI for MSI support
-
-Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
-which can be used by on-board peripheral for MSI interrupts.
-
-Required properties:
-
-- compatible           : The value here should contain:
-
-    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
-
-- interrupt,controller : Identifies the node as an interrupt controller.
-
-- msi-controller       : Identifies the node as an MSI controller.
-
-- marvell,odmi-frames  : Number of ODMI frames available. Each frame
-                         provides a number of events.
-
-- reg                  : List of register definitions, one for each
-                         ODMI frame.
-
-- marvell,spi-base     : List of GIC base SPI interrupts, one for each
-                         ODMI frame. Those SPI interrupts are 0-based,
-                         i.e marvell,spi-base = <128> will use SPI #96.
-                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
-                         for details about the GIC Device Tree binding.
-
-Example:
-
-	odmi: odmi@300000 {
-		compatible = "marvell,ap806-odmi-controller",
-			     "marvell,odmi-controller";
-		interrupt-controller;
-		msi-controller;
-		marvell,odmi-frames = <4>;
-		reg = <0x300000 0x4000>,
-		      <0x304000 0x4000>,
-		      <0x308000 0x4000>,
-		      <0x30C000 0x4000>;
-		marvell,spi-base = <128>, <136>, <144>, <152>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml
new file mode 100644
index 000000000000..9ec1ed4a5155
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,odmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell ODMI controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+description:
+  Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller which can
+  be used by on-board peripherals for MSI interrupts.
+
+properties:
+  compatible:
+    const: marvell,odmi-controller
+
+  reg:
+    description: List of register definitions, one for each ODMI frame.
+
+  msi-controller: true
+
+  marvell,odmi-frames:
+    description: Number of ODMI frames available. Each frame provides a number of events.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,spi-base:
+    description: >
+      List of GIC base SPI interrupts, one for each ODMI frame. Those SPI
+      interrupts are 0-based, i.e. marvell,spi-base = <128> will use SPI #96.
+      See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - marvell,odmi-frames
+  - marvell,spi-base
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@300000 {
+        compatible = "marvell,odmi-controller";
+        msi-controller;
+        marvell,odmi-frames = <4>;
+        reg = <0x300000 0x4000>, <0x304000 0x4000>, <0x308000 0x4000>, <0x30C000 0x4000>;
+        marvell,spi-base = <128>, <136>, <144>, <152>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml
new file mode 100644
index 000000000000..e1310ec65382
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,orion-bridge-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SoC Bridge Interrupt Controller
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,orion-bridge-intc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    description: Bridge interrupt of the main interrupt controller
+
+  marvell,#interrupts:
+    description: Number of interrupts provided by bridge interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@20110 {
+        compatible = "marvell,orion-bridge-intc";
+        reg = <0x20110 0x8>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <0>;
+        /* Dove bridge provides 5 interrupts */
+        marvell,#interrupts = <5>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
deleted file mode 100644
index 2c11ac76fac9..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Marvell Orion SoC interrupt controllers
-
-* Main interrupt controller
-
-Required properties:
-- compatible: shall be "marvell,orion-intc"
-- reg: base address(es) of interrupt registers starting with CAUSE register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of first base address,
-- 1 maps to bit 1 of first base address,
-- 32 maps to bit 0 of second base address, and so on.
-
-Example:
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		 /* Dove has 64 first level interrupts */
-		reg = <0x20200 0x10>, <0x20210 0x10>;
-	};
-
-* Bridge interrupt controller
-
-Required properties:
-- compatible: shall be "marvell,orion-bridge-intc"
-- reg: base address of bridge interrupt registers starting with CAUSE register
-- interrupts: bridge interrupt of the main interrupt controller
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
-
-Optional properties:
-- marvell,#interrupts: number of interrupts provided by bridge interrupt
-      controller, defaults to 32 if not set
-
-Example:
-	bridge_intc: interrupt-controller {
-		compatible = "marvell,orion-bridge-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x20110 0x8>;
-		interrupts = <0>;
-		/* Dove bridge provides 5 interrupts */
-		marvell,#interrupts = <5>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
deleted file mode 100644
index 0beafed502f5..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Marvell SEI (System Error Interrupt) Controller
------------------------------------------------
-
-Marvell SEI (System Error Interrupt) controller is an interrupt
-aggregator. It receives interrupts from several sources and aggregates
-them to a single interrupt line (an SPI) on the parent interrupt
-controller.
-
-This interrupt controller can handle up to 64 SEIs, a set comes from the
-AP and is wired while a second set comes from the CPs by the mean of
-MSIs.
-
-Required properties:
-
-- compatible: should be one of:
-              * "marvell,ap806-sei"
-- reg: SEI registers location and length.
-- interrupts: identifies the parent IRQ that will be triggered.
-- #interrupt-cells: number of cells to define an SEI wired interrupt
-                    coming from the AP, should be 1. The cell is the IRQ
-                    number.
-- interrupt-controller: identifies the node as an interrupt controller
-                        for AP interrupts.
-- msi-controller: identifies the node as an MSI controller for the CPs
-                  interrupts.
-
-Example:
-
-        sei: interrupt-controller@3f0200 {
-                compatible = "marvell,ap806-sei";
-                reg = <0x3f0200 0x40>;
-                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-                #interrupt-cells = <1>;
-                interrupt-controller;
-                msi-controller;
-        };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
deleted file mode 100644
index c3a1b37c4c35..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Microchip PIC32 Interrupt Controller
-====================================
-
-The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
-It handles all internal and external interrupts. This controller exists outside
-of the CPU and is the arbitrator of all interrupts (including interrupts from
-the CPU itself) before they are presented to the CPU.
-
-External interrupts have a software configurable edge polarity. Non external
-interrupts have a type and polarity that is determined by the source of the
-interrupt.
-
-Required properties
--------------------
-
-- compatible: Should be "microchip,pic32mzda-evic"
-- reg: Specifies physical base address and size of register range.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt cells: Specifies the number of cells used to encode an interrupt
-  source connected to this controller. The value shall be 2 and interrupt
-  descriptor shall have the following format:
-
-	<hw_irq irq_type>
-
-  hw_irq - represents the hardware interrupt number as in the data sheet.
-  irq_type - is used to describe the type and polarity of an interrupt. For
-  internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
-  IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
-  IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
-
-Optional properties
--------------------
-- microchip,external-irqs: u32 array of external interrupts with software
-  polarity configuration. This array corresponds to the bits in the INTCON
-  SFR.
-
-Example
--------
-
-evic: interrupt-controller@1f810000 {
-	compatible = "microchip,pic32mzda-evic";
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	reg = <0x1f810000 0x1000>;
-	microchip,external-irqs = <3 8 13 18 23>;
-};
-
-Each device/peripheral must request its interrupt line with the associated type
-and polarity.
-
-Internal interrupt DTS snippet
-------------------------------
-
-device@1f800000 {
-	...
-	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
-	...
-};
-
-External interrupt DTS snippet
-------------------------------
-
-device@1f800000 {
-	...
-	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-	...
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml
new file mode 100644
index 000000000000..74bfc42693f0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,pic32mzda-evic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 EVIC Interrupt Controller
+
+maintainers:
+  - Cristian Birsan <cristian.birsan@microchip.com>
+
+description: >
+  The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+  It handles all internal and external interrupts. This controller exists
+  outside of the CPU and is the arbitrator of all interrupts (including
+  interrupts from the CPU itself) before they are presented to the CPU.
+
+  External interrupts have a software configurable edge polarity. Non external
+  interrupts have a type and polarity that is determined by the source of the
+  interrupt.
+
+properties:
+  compatible:
+    items:
+      - const: microchip,pic32mzda-evic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  microchip,external-irqs:
+    description:
+      External interrupts with software polarity configuration corresponding to
+      the INTCON SFR bits.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+      interrupt-controller@1f810000 {
+          compatible = "microchip,pic32mzda-evic";
+          reg = <0x1f810000 0x1000>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          microchip,external-irqs = <3 8 13 18 23>;
+      };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
deleted file mode 100644
index 2ff356640100..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Legacy Interrupt Controller
-
-All Tegra SoCs contain a legacy interrupt controller that routes
-interrupts to the GIC, and also serves as a wakeup source. It is also
-referred to as "ictlr", hence the name of the binding.
-
-The HW block exposes a number of interrupt controllers, each
-implementing a set of 32 interrupts.
-
-Required properties:
-
-- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
-  subsequent SoCs remained backwards-compatible with Tegra30, so on
-  Tegra generations later than Tegra30 the compatible value should
-  include "nvidia,tegra30-ictlr".	
-- reg : Specifies base physical address and size of the registers.
-  Each controller must be described separately (Tegra20 has 4 of them,
-  whereas Tegra30 and later have 5).
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
-  interrupt specifier must be that of the GIC.
-- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
-  are explicitly forbidden.
-
-Example:
-
-	ictlr: interrupt-controller@60004000 {
-		compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
-		reg = <0x60004000 64>,
-		      <0x60004100 64>,
-		      <0x60004200 64>,
-		      <0x60004300 64>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&intc>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml
new file mode 100644
index 000000000000..074a873880e5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nvidia,tegra20-ictlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Legacy Interrupt Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: >
+  All Tegra SoCs contain a legacy interrupt controller that routes interrupts to
+  the GIC, and also serves as a wakeup source. It is also referred to as
+  "ictlr", hence the name of the binding.
+
+  The HW block exposes a number of interrupt controllers, each implementing a
+  set of 32 interrupts.
+
+  Notes:
+    - Because this HW ultimately routes interrupts to the GIC, the
+      interrupt specifier must be that of the GIC.
+    - Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+      are explicitly forbidden.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra114-ictlr
+              - nvidia,tegra124-ictlr
+          - const: nvidia,tegra30-ictlr
+      - enum:
+          - nvidia,tegra20-ictlr
+          - nvidia,tegra30-ictlr
+
+  reg:
+    description: Each entry is a block of 32 interrupts
+    minItems: 4
+    maxItems: 5
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-ictlr
+    then:
+      properties:
+        reg:
+          maxItems: 4
+    else:
+      properties:
+        reg:
+          minItems: 5
+
+examples:
+  - |
+    interrupt-controller@60004000 {
+        compatible = "nvidia,tegra20-ictlr";
+        reg = <0x60004000 64>,
+              <0x60004100 64>,
+              <0x60004200 64>,
+              <0x60004300 64>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
deleted file mode 100644
index ccbbfdc53c72..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-* Open PIC Binding
-
-This binding specifies what properties must be available in the device tree
-representation of an Open PIC compliant interrupt controller.  This binding is
-based on the binding defined for Open PIC in [1] and is a superset of that
-binding.
-
-Required properties:
-
-  NOTE: Many of these descriptions were paraphrased here from [1] to aid
-        readability.
-
-    - compatible: Specifies the compatibility list for the PIC.  The type
-      shall be <string> and the value shall include "open-pic".
-
-    - reg: Specifies the base physical address(s) and size(s) of this
-      PIC's addressable register space.  The type shall be <prop-encoded-array>.
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an Open PIC.  No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-    - #address-cells: Specifies the number of cells needed to encode an
-      address.  The type shall be <u32> and the value shall be 0.  As such,
-      'interrupt-map' nodes do not have to specify a parent unit address.
-
-Optional properties:
-
-    - pic-no-reset: The presence of this property indicates that the PIC
-      shall not be reset during runtime initialization.  No property value shall
-      be defined.  The presence of this property also mandates that any
-      initialization related to interrupt sources shall be limited to sources
-      explicitly referenced in the device tree.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as
-  follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-
-    - <2nd-cell>: The level-sense information, encoded as follows:
-                    0 = low-to-high edge triggered
-                    1 = active low level-sensitive
-                    2 = active high level-sensitive
-                    3 = high-to-low edge triggered
-
-* Examples
-
-Example 1:
-
-	/*
-	 * An Open PIC interrupt controller
-	 */
-	mpic: pic@40000 {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// No address cells so that 'interrupt-map' nodes which reference
-		// this Open PIC node do not need a parent address specifier.
-		#address-cells = <0>;
-
-		// Two cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Offset address of 0x40000 and size of 0x40000.
-		reg = <0x40000 0x40000>;
-
-		// Compatible with Open PIC.
-		compatible = "open-pic";
-
-		// The PIC shall not be reset.
-		pic-no-reset;
-	};
-
-Example 2:
-
-	/*
-	 * An interrupt generating device that is wired to an Open PIC.
-	 */
-	serial0: serial@4500 {
-		// Interrupt source '42' that is active high level-sensitive.
-		// Note that there are only two cells as specified in the interrupt
-		// parent's '#interrupt-cells' property.
-		interrupts = <42 2>;
-
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&mpic>;
-	};
-
-* References
-
-[1] Devicetree Specification
-    (https://www.devicetree.org/specifications/)
-
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
deleted file mode 100644
index 55c04faa3f3f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-OpenRISC 1000 Programmable Interrupt Controller
-
-Required properties:
-
-- compatible : should be "opencores,or1k-pic-level" for variants with
-  level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
-  edge triggered interrupt lines or "opencores,or1200-pic" for machines
-  with the non-spec compliant or1200 type implementation.
-
-  "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
-  but this is only for backwards compatibility.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-Example:
-
-intc: interrupt-controller {
-	compatible = "opencores,or1k-pic-level";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml
new file mode 100644
index 000000000000..995b68c3aed4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/opencores,or1k-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenRISC 1000 Programmable Interrupt Controller
+
+maintainers:
+  - Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+
+properties:
+  compatible:
+    enum:
+      - opencores,or1k-pic-level
+      - opencores,or1k-pic-edge
+      - opencores,or1200-pic
+      - opencores,or1k-pic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "opencores,or1k-pic-level";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
deleted file mode 100644
index caec07cc7149..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Open Multi-Processor Interrupt Controller
-
-Required properties:
-
-- compatible : This should be "openrisc,ompic"
-- reg : Specifies base physical address and size of the register space. The
-  size is based on the number of cores the controller has been configured
-  to handle, this should be set to 8 bytes per cpu core.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : This should be set to 0 as this will not be an irq
-  parent.
-- interrupts : Specifies the interrupt line to which the ompic is wired.
-
-Example:
-
-ompic: interrupt-controller@98000000 {
-	compatible = "openrisc,ompic";
-	reg = <0x98000000 16>;
-	interrupt-controller;
-	#interrupt-cells = <0>;
-	interrupts = <1>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml
new file mode 100644
index 000000000000..4efbfba3aa6b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/openrisc,ompic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Multi-Processor Interrupt Controller
+
+maintainers:
+  - Stafford Horne <shorne@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: openrisc,ompic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@98000000 {
+        compatible = "openrisc,ompic";
+        reg = <0x98000000 16>;
+        interrupt-controller;
+        #interrupt-cells = <0>;
+        interrupts = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml
new file mode 100644
index 000000000000..ab32a91af4c4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qca,ar7100-cpu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath79 CPU interrupt controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+description:
+  On most SoC the IRQ controller need to flush the DDR FIFO before running the
+  interrupt handler of some devices. This is configured using the
+  qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-cpu-intc
+          - const: qca,ar7100-cpu-intc
+      - items:
+          - const: qca,ar7100-cpu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  qca,ddr-wb-channel-interrupts:
+    description: List of interrupts needing a write buffer flush
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  qca,ddr-wb-channels:
+    description: List of write buffer channel phandles for each interrupt
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+      interrupt-controller {
+          compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+          interrupt-controller;
+          #interrupt-cells = <1>;
+
+          qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+          qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+                                <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+      };
+
+      ddr_ctrl: memory-controller {
+          #qca,ddr-wb-channel-cells = <1>;
+      };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml
new file mode 100644
index 000000000000..ae813189f5ab
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qca,ar7100-misc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+  - Alexander Couzens <lynxis@fe80.eu>
+
+description:
+  The Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller is a secondary
+  controller for lower priority interrupts.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-misc-intc
+          - const: qca,ar7100-misc-intc
+      - const: qca,ar7240-misc-intc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+examples:
+  - |
+    interrupt-controller@18060010 {
+        compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
+        reg = <0x18060010 0x4>;
+        interrupts = <6>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
deleted file mode 100644
index aabce7810d29..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
-
-On most SoC the IRQ controller need to flush the DDR FIFO before running
-the interrupt handler of some devices. This is configured using the
-qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
-
-Required Properties:
-
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
-  as fallback
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1 for intc
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Optional Properties:
-
-- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
-  buffer flush
-- qca,ddr-wb-channels: List of phandles to the write buffer channels for
-  each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
-  default to the entry's index.
-
-Example:
-
-	interrupt-controller {
-		compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
-	};
-
-	...
-
-	ddr_ctrl: memory-controller@18000000 {
-		...
-		#qca,ddr-wb-channel-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
deleted file mode 100644
index ad70006c1848..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
-
-The MISC interrupt controller is a secondary controller for lower priority
-interrupt.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
-  "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
-- reg: Base address and size of the controllers memory area
-- interrupts: Interrupt specifier for the controllers interrupt.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1
-
-Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
-use ar7240 for all other SoCs.
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
-	interrupt-controller@18060010 {
-		compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
-		reg = <0x18060010 0x4>;
-
-		interrupt-parent = <&cpuintc>;
-		interrupts = <6>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-Another example:
-
-	interrupt-controller@18060010 {
-		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
-		reg = <0x18060010 0x4>;
-
-		interrupt-parent = <&cpuintc>;
-		interrupts = <6>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 3dfe425909d1..ffc4768bad06 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -70,6 +70,7 @@ properties:
               - sophgo,cv1812h-plic
               - sophgo,sg2002-plic
               - sophgo,sg2042-plic
+              - sophgo,sg2044-plic
               - thead,th1520-plic
           - const: thead,c900-plic
       - items:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
deleted file mode 100644
index 9a5d562435ea..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* ARC700 incore Interrupt Controller
-
-  The core interrupt controller provides 32 prioritised interrupts (2 levels)
-  to ARC700 core.
-
-Properties:
-
-- compatible: "snps,arc700-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Single Cell "interrupts" property of a device specifies the IRQ number
-  between 0 to 31
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
-
-Example:
-
-	intc: interrupt-controller {
-		compatible = "snps,arc700-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml
new file mode 100644
index 000000000000..000a734d997c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,arc700-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC700 incore Interrupt Controller
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description: >
+  The core interrupt controller provides 32 prioritized interrupts (2 levels)
+  to ARC700 core.
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+properties:
+  compatible:
+    const: snps,arc700-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: An interrupt number 0-31
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,arc700-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
deleted file mode 100644
index a5c1db95b3ec..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* ARC-HS Interrupt Distribution Unit
-
-  This optional 2nd level interrupt controller can be used in SMP configurations
-  for dynamic IRQ routing, load balancing of common/external IRQs towards core
-  intc.
-
-Properties:
-
-- compatible: "snps,archs-idu-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1> or <2>.
-
-  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
-  Number N of the particular interrupt line of IDU corresponds to the line N+24
-  of the core interrupt controller.
-
-  The (optional) second cell specifies any of the following flags:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = NOT SUPPORTED (high-to-low edge triggered)
-        4 = active high level-sensitive <<< DEFAULT
-        8 = NOT SUPPORTED (active low level-sensitive)
-  When no second cell is specified, the interrupt is assumed to be level
-  sensitive.
-
-  The interrupt controller is accessed via the special ARC AUX register
-  interface, hence "reg" property is not specified.
-
-Example:
-	core_intc: core-interrupt-controller {
-		compatible = "snps,archs-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	idu_intc: idu-interrupt-controller {
-		compatible = "snps,archs-idu-intc";
-		interrupt-controller;
-		interrupt-parent = <&core_intc>;
-		#interrupt-cells = <1>;
-	};
-
-	some_device: serial@c0fc1000 {
-		interrupt-parent = <&idu_intc>;
-		interrupts = <0>;	/* upstream idu IRQ #24 */
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
new file mode 100644
index 000000000000..286a964f23e1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,archs-idu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC-HS Interrupt Distribution Unit
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description: >
+  ARC-HS Interrupt Distribution Unit is an optional 2nd level interrupt
+  controller which can be used in SMP configurations for dynamic IRQ routing,
+  load balancing of common/external IRQs towards core intc.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
+
+properties:
+  compatible:
+    const: snps,archs-idu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      Number of interrupt specifier cells:
+        - 1: only a common IRQ is specified.
+        - 2: a second cell encodes trigger type and level flags:
+            1 = low-to-high edge triggered
+            4 = active high level-sensitive (default)
+    enum: [1, 2]
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,archs-idu-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
deleted file mode 100644
index 69f326d6a5ad..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)
-
-Properties:
-
-- compatible: "snps,archs-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Single Cell "interrupts" property of a device specifies the IRQ number
-  between 16 to 256
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
-
-Example:
-
-	intc: interrupt-controller {
-		compatible = "snps,archs-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupts = <16 17 18 19 20 21 22 23 24 25>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml
new file mode 100644
index 000000000000..9d248ef7fe3d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,archs-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC-HS incore Interrupt Controller
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description:
+  ARC-HS incore Interrupt Controller provided by cores implementing ARCv2 ISA.
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+properties:
+  compatible:
+    const: snps,archs-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    description: List of IRQ numbers between 16 and 256
+    items:
+      items:
+        - minimum: 16
+          maximum: 256
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,archs-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <16>, <17>, <18>, <19>, <20>, <21>, <22>, <23>, <24>, <25>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
deleted file mode 100644
index 2db59df9408f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
-
-Synopsys DesignWare provides interrupt controller IP for APB known as
-dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
-controller in some SoCs, e.g. Hisilicon SD5203.
-
-Required properties:
-- compatible: shall be "snps,dw-apb-ictl"
-- reg: physical base address of the controller and length of memory mapped
-  region starting with ENABLE_LOW register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
-
-Additional required property when it's used as secondary interrupt controller:
-- interrupts: interrupt reference to primary interrupt controller
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of low interrupts,
-- 1 maps to bit 1 of low interrupts,
-- 32 maps to bit 0 of high interrupts,
-- 33 maps to bit 1 of high interrupts,
-- (optional) fast interrupts start at 64.
-
-Example:
-	/* dw_apb_ictl is used as secondary interrupt controller */
-	aic: interrupt-controller@3000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x3000 0xc00>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* dw_apb_ictl is used as primary interrupt controller */
-	vic: interrupt-controller@10130000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x10130000 0x1000>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
new file mode 100644
index 000000000000..6b59b600a037
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB interrupt controller
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+  - Zhen Lei <thunder.leizhen@huawei.com>
+
+description:
+  Synopsys DesignWare provides interrupt controller IP for APB known as
+  dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
+  with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
+  interrupt controller in some SoCs, e.g. Hisilicon SD5203.
+
+properties:
+  compatible:
+    const: snps,dw-apb-ictl
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description: >
+      Interrupt input connected to the primary interrupt controller when used
+      as a secondary controller. The interrupt specifier maps to bits in the
+      low and high interrupt registers (0⇒bit 0 low, 1⇒bit 1 low, 32⇒bit 0 high,
+      33⇒bit 1 high, fast interrupts start at 64).
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x3000 0xc00>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+  - |
+    interrupt-controller@10130000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x10130000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml
index e1ffd55fa7bf..f6b8b1d92f79 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml
@@ -18,7 +18,9 @@ allOf:
 
 properties:
   compatible:
-    const: sophgo,sg2042-msi
+    enum:
+      - sophgo,sg2042-msi
+      - sophgo,sg2044-msi
 
   reg:
     items:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
new file mode 100644
index 000000000000..27d36173366a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,spear300-shirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPEAr3xx Shared IRQ controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+
+description: |
+  SPEAr3xx architecture includes shared/multiplexed irqs for certain set of
+  devices. The multiplexor provides a single interrupt to parent interrupt
+  controller (VIC) on behalf of a group of devices.
+
+  There can be multiple groups available on SPEAr3xx variants but not exceeding
+  4. The number of devices in a group can differ, further they may share same
+  set of status/mask registers spanning across different bit masks. Also in some
+  cases the group may not have enable or other registers. This makes software
+  little complex.
+
+  A single node in the device tree is used to describe the shared interrupt
+  multiplexer (one node for all groups). A group in the interrupt controller
+  shares config/control registers with other groups. For example, a 32-bit
+  interrupt enable/disable config register can accommodate up to 4 interrupt
+  groups.
+
+properties:
+  compatible:
+    enum:
+      - st,spear300-shirq
+      - st,spear310-shirq
+      - st,spear320-shirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    description: Interrupt specifier array for SHIRQ groups
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@b3000000 {
+        compatible = "st,spear320-shirq";
+        reg = <0xb3000000 0x1000>;
+        interrupts = <28 29 30 1>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
deleted file mode 100644
index a407c499b3cc..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* SPEAr Shared IRQ layer (shirq)
-
-SPEAr3xx architecture includes shared/multiplexed irqs for certain set
-of devices. The multiplexor provides a single interrupt to parent
-interrupt controller (VIC) on behalf of a group of devices.
-
-There can be multiple groups available on SPEAr3xx variants but not
-exceeding 4. The number of devices in a group can differ, further they
-may share same set of status/mask registers spanning across different
-bit masks. Also in some cases the group may not have enable or other
-registers. This makes software little complex.
-
-A single node in the device tree is used to describe the shared
-interrupt multiplexor (one node for all groups). A group in the
-interrupt controller shares config/control registers with other groups.
-For example, a 32-bit interrupt enable/disable config register can
-accommodate up to 4 interrupt groups.
-
-Required properties:
-  - compatible: should be, either of
-     - "st,spear300-shirq"
-     - "st,spear310-shirq"
-     - "st,spear320-shirq"
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: should be <1> which basically contains the offset
-    (starting from 0) of interrupts for all the groups.
-  - reg: Base address and size of shirq registers.
-  - interrupts: The list of interrupts generated by the groups which are
-    then connected to a parent interrupt controller. Each group is
-    associated with one of the interrupts, hence number of interrupts (to
-    parent) is equal to number of groups. The format of the interrupt
-    specifier depends in the interrupt parent controller.
-
-Example:
-
-The following is an example from the SPEAr320 SoC dtsi file.
-
-shirq: interrupt-controller@b3000000 {
-	compatible = "st,spear320-shirq";
-	reg = <0xb3000000 0x1000>;
-	interrupts = <28 29 30 1>;
-	#interrupt-cells = <1>;
-	interrupt-controller;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml
new file mode 100644
index 000000000000..f1a15d725cd6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/technologic,ts4800-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TS-4800 FPGA Interrupt Controller
+
+maintainers:
+  - Damien Riegel <damien.riegel@savoirfairelinux.com>
+
+description:
+  TS-4800 FPGA has an internal interrupt controller. When one of the interrupts
+  is triggered, the SoC is notified, usually using a GPIO as parent interrupt
+  source.
+
+properties:
+  compatible:
+    const: technologic,ts4800-irqc
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1000 {
+        compatible = "technologic,ts4800-irqc";
+        reg = <0x1000 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <10>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
deleted file mode 100644
index 341ae5909333..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-TS-4800 FPGA interrupt controller
-
-TS-4800 FPGA has an internal interrupt controller. When one of the
-interrupts is triggered, the SoC is notified, usually using a GPIO as
-parent interrupt source.
-
-Required properties:
-- compatible: should be "technologic,ts4800-irqc"
-- interrupt-controller: identifies the node as an interrupt controller
-- reg: physical base address of the controller and length of memory mapped
-  region
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
index 065f2544b63b..d6fb08a54167 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - sophgo,sg2042-aclint-mswi
+          - sophgo,sg2044-aclint-mswi
       - const: thead,c900-aclint-mswi
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
deleted file mode 100644
index 597e8a089fe4..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* TI Common Platform Interrupt Controller
-
-Common Platform Interrupt Controller (cp_intc) is used on
-OMAP-L1x SoCs and can support several configurable number
-of interrupts.
-
-Main node required properties:
-
-- compatible : should be:
-	"ti,cp-intc"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The type shall be a <u32> and the value shall be 1.
-
-  The cell contains the interrupt number in the range [0-128].
-- ti,intc-size: Number of interrupts handled by the interrupt controller.
-- reg: physical base address and size of the intc registers map.
-
-Example:
-
-	intc: interrupt-controller@1 {
-		compatible = "ti,cp-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		ti,intc-size = <101>;
-		reg = <0xfffee000 0x2000>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml
new file mode 100644
index 000000000000..77d018d20f9f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,cp-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Common Platform Interrupt Controller
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  
+description:
+  Common Platform Interrupt Controller (cp_intc) is used on OMAP-L1x SoCs and
+  can support several configurable number of interrupts.
+
+properties:
+  compatible:
+    const: ti,cp-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: Encodes an interrupt number in the range 0–128.
+
+  ti,intc-size:
+    description: Number of interrupts handled by the interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,intc-size
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffee000 {
+        compatible = "ti,cp-intc";
+        reg = <0xfffee000 0x2000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        ti,intc-size = <101>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
deleted file mode 100644
index 5f94d7739d8d..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Keystone 2 IRQ controller IP
-
-On Keystone SOCs, DSP cores can send interrupts to ARM
-host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
-The IRQ handler running on HOST OS can identify DSP signal source by
-analyzing SRCCx bits in IPCARx registers. This is one of the component
-used by the IPC mechanism used on Keystone SOCs.
-
-Required Properties:
-- compatible: should be "ti,keystone-irq"
-- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
-			access device control registers and the offset inside
-			device control registers range.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-					 source should be 1.
-- interrupts: interrupt reference to primary interrupt controller
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-	kirq0: keystone_irq0@26202a0 {
-		compatible = "ti,keystone-irq";
-		ti,syscon-dev = <&devctrl 0x2a0>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	dsp0: dsp0 {
-		compatible = "linux,rproc-user";
-		...
-		interrupt-parent = <&kirq0>;
-		interrupts = <10 2>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
new file mode 100644
index 000000000000..27d448d1786a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,keystone-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone 2 IRQ controller IP
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description:
+  On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ
+  controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on
+  HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx
+  registers. This is one of the component used by the IPC mechanism used on
+  Keystone SOCs.
+
+properties:
+  compatible:
+    const: ti,keystone-irq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,syscon-dev:
+    description: Phandle and offset to syscon device
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to syscon device control registers
+          - description: Offset to control register
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - ti,syscon-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@2a0 {
+      compatible = "ti,keystone-irq";
+      reg = <0x2a0 0x4>;
+      ti,syscon-dev = <&devctrl 0x2a0>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
deleted file mode 100644
index 38ce5d037722..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Omap2/3 intc controller
-
-On TI omap2 and 3 the intc interrupt controller can provide
-96 or 128 IRQ signals to the ARM host depending on the SoC.
-
-Required Properties:
-- compatible: should be one of
-			"ti,omap2-intc"
-			"ti,omap3-intc"
-			"ti,dm814-intc"
-			"ti,dm816-intc"
-			"ti,am33xx-intc"
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1 for intc
-- interrupts: interrupt reference to primary interrupt controller
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-	intc: interrupt-controller@48200000 {
-		compatible = "ti,omap3-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x48200000 0x1000>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml
new file mode 100644
index 000000000000..cb118180621f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,omap-intc-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP Interrupt Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On TI omap2 and 3 the intc interrupt controller can provide 96 or 128 IRQ
+  signals to the ARM host depending on the SoC.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-intc
+      - ti,omap3-intc
+      - ti,dm814-intc
+      - ti,dm816-intc
+      - ti,am33xx-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48200000 {
+        compatible = "ti,omap3-intc";
+        reg = <0x48200000 0x1000>;
+        interrupts = <32>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
deleted file mode 100644
index f2583e6ec060..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* OMAP Interrupt Controller
-
-OMAP2/3 are using a TI interrupt controller that can support several
-configurable number of interrupts.
-
-Main node required properties:
-
-- compatible : should be:
-	"ti,omap2-intc"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The type shall be a <u32> and the value shall be 1.
-
-  The cell contains the interrupt number in the range [0-128].
-- ti,intc-size: Number of interrupts handled by the interrupt controller.
-- reg: physical base address and size of the intc registers map.
-
-Example:
-
-	intc: interrupt-controller@1 {
-		compatible = "ti,omap2-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		ti,intc-size = <96>;
-		reg = <0x48200000 0x1000>;
-	};
-
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt
deleted file mode 100644
index 422d6908f8b2..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-TI OMAP4 Wake-up Generator
-
-All TI OMAP4/5 (and their derivatives) an interrupt controller that
-routes interrupts to the GIC, and also serves as a wakeup source. It
-is also referred to as "WUGEN-MPU", hence the name of the binding.
-
-Required properties:
-
-- compatible : should contain at least "ti,omap4-wugen-mpu" or
-  "ti,omap5-wugen-mpu"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
-  interrupt specifier must be that of the GIC.
-- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
-  are explicitly forbidden.
-
-Example:
-
-       wakeupgen: interrupt-controller@48281000 {
-               compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-               interrupt-controller;
-               #interrupt-cells = <3>;
-               reg = <0x48281000 0x1000>;
-               interrupt-parent = <&gic>;
-       };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
new file mode 100644
index 000000000000..6e3d6e6d9e07
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,omap4-wugen-mpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP4 Wake-up Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: >
+  All TI OMAP4/5 (and their derivatives) are interrupt controllers that route
+  interrupts to the GIC, and also serve as wakeup sources. They are also
+  referred to as "WUGEN-MPU", hence the name of the binding.
+
+  Notes:
+
+    - Because this HW ultimately routes interrupts to the GIC, the interrupt
+      specifier must be that of the GIC.
+    - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs are
+      explicitly forbidden.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ti,omap5-wugen-mpu
+          - const: ti,omap4-wugen-mpu
+      - const: ti,omap4-wugen-mpu
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48281000 {
+        compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+        reg = <0x48281000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
deleted file mode 100644
index 0a4ce1051b02..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-VIA/Wondermedia VT8500 Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-intc"
-- reg : Should contain 1 register ranges(address and length)
-- #interrupt-cells : should be <1>
-
-Example:
-
-	intc: interrupt-controller@d8140000 {
-		compatible = "via,vt8500-intc";
-		interrupt-controller;
-		reg = <0xd8140000 0x10000>;
-		#interrupt-cells = <1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml
new file mode 100644
index 000000000000..bc14c74bf7d5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/via,vt8500-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA and WonderMedia SoCs Interrupt Controller
+
+description:
+  This is the interrupt controller used in single-core ARM SoCs made by
+  VIA and WonderMedia (up to and including WM8950). Each block handles
+  up to 64 interrupt sources (level or edge triggered) and can generate
+  up to 8 interrupts to its parent when used in a chained configuration.
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: via,vt8500-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          Interrupt number raised by the IRQ0 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ1 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ2 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ3 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ4 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ5 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ6 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ7 output of this controller
+          Only used if this controller is chained
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@d8140000 {
+        compatible = "via,vt8500-intc";
+        interrupt-controller;
+        reg = <0xd8140000 0x10000>;
+        #interrupt-cells = <1>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index ea6b0f5f24de..75750c64157c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -74,6 +74,7 @@ properties:
           - mediatek,mt2712-m4u  # generation two
           - mediatek,mt6779-m4u  # generation two
           - mediatek,mt6795-m4u  # generation two
+          - mediatek,mt6893-iommu-mm         # generation two
           - mediatek,mt8167-m4u  # generation two
           - mediatek,mt8173-m4u  # generation two
           - mediatek,mt8183-m4u  # generation two
@@ -131,6 +132,7 @@ properties:
       dt-binding/memory/mt2712-larb-port.h for mt2712,
       dt-binding/memory/mt6779-larb-port.h for mt6779,
       dt-binding/memory/mt6795-larb-port.h for mt6795,
+      dt-binding/memory/mediatek,mt6893-memory-port.h for mt6893,
       dt-binding/memory/mt8167-larb-port.h for mt8167,
       dt-binding/memory/mt8173-larb-port.h for mt8173,
       dt-binding/memory/mt8183-larb-port.h for mt8183,
@@ -157,6 +159,7 @@ allOf:
               - mediatek,mt2701-m4u
               - mediatek,mt2712-m4u
               - mediatek,mt6795-m4u
+              - mediatek,mt6893-iommu-mm
               - mediatek,mt8173-m4u
               - mediatek,mt8186-iommu-mm
               - mediatek,mt8188-iommu-vdo
@@ -173,6 +176,7 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt6893-iommu-mm
             - mediatek,mt8186-iommu-mm
             - mediatek,mt8188-iommu-vdo
             - mediatek,mt8188-iommu-vpp
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml
new file mode 100644
index 000000000000..d44232d462bd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lp8864.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LP8864/LP8866 4/6-Channel LED Driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+  - Alexander Sverdlin <alexander.sverdlin@siemens.com>
+
+description: |
+  LP8866-Q1, LP8866S-Q1, LP8864-Q1, LP8864S-Q1 are display LED-backlight drivers
+  with 4/6 channels. LED brightness can be controlled globally through the I2C
+  interface or PWM input.
+
+  For more product information please see the links below:
+    https://www.ti.com/product/LP8864-Q1
+    https://www.ti.com/product/LP8864S-Q1
+    https://www.ti.com/product/LP8866-Q1
+    https://www.ti.com/product/LP8866S-Q1
+
+properties:
+  compatible:
+    const: ti,lp8864
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable (active high) / disable the device
+
+  vled-supply:
+    description: LED supply
+
+  led:
+    type: object
+    $ref: common.yaml#
+    properties:
+      function: true
+      color: true
+      label: true
+      linux,default-trigger: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3a {
+            compatible = "ti,lp8864";
+            reg = <0x3a>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+
+            led {
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/leds/ti,tps61310.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/leds/ti,tps61310.yaml
new file mode 100644
index 000000000000..118f9c8bfdf7
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/leds/ti,tps61310.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tps61310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6131X flash LED driver
+
+maintainers:
+  - Matthias Fend <matthias.fend@emfend.at>
+
+description: |
+  The TPS61310/TPS61311 is a flash LED driver with I2C interface.
+  Its power stage is capable of supplying a maximum total current of roughly 1500mA.
+  The TPS6131x provides three constant-current sinks, capable of sinking
+  up to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode.
+  In torch mode, each sink (LED1, LED2, LED3) supports currents up to 175mA.
+  Since the three current sinks share most of the control components such as
+  flash timer, control logic, safety timer and the operating mode, they cannot
+  be used completely independently of each other. Therefore, only one LED is
+  supported, but the current sinks can be combined accordingly.
+
+  The data sheet can be found at:
+    https://www.ti.com/lit/ds/symlink/tps61310.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,tps61311
+          - const: ti,tps61310
+      - items:
+          - const: ti,tps61310
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to NRESET pin
+
+  ti,valley-current-limit:
+    type: boolean
+    description:
+      Reduce the valley peak current limit from 1750mA to 1250mA (TPS61310) or
+      from 2480mA to 1800mA (TPS61311).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        minItems: 1
+        maxItems: 3
+        items:
+          enum: [1, 2, 3]
+
+      led-max-microamp:
+        oneOf:
+          - minimum: 50000
+            maximum: 350000
+            multipleOf: 50000
+          - minimum: 25000
+            maximum: 525000
+            multipleOf: 25000
+
+      flash-max-microamp:
+        oneOf:
+          - minimum: 50000
+            maximum: 800000
+            multipleOf: 50000
+          - minimum: 25000
+            maximum: 1500000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        enum: [ 5300, 10700, 16000, 21300, 26600, 32000, 37300, 68200, 71500,
+                102200, 136300, 170400, 204500, 340800, 579300, 852000 ]
+
+    required:
+      - led-sources
+      - led-max-microamp
+      - flash-max-microamp
+      - flash-max-timeout-us
+
+required:
+  - compatible
+  - reg
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      led-controller@33 {
+        compatible = "ti,tps61311", "ti,tps61310";
+        reg = <0x33>;
+
+        reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+
+        led {
+          function = LED_FUNCTION_FLASH;
+          color = <LED_COLOR_ID_WHITE>;
+          led-sources = <1>, <2>, <3>;
+          led-max-microamp = <525000>;
+          flash-max-microamp = <1500000>;
+          flash-max-timeout-us = <852000>;
+        };
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index a58a018f3f7b..ac726136f7e5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -49,6 +49,7 @@ properties:
               - qcom,qcs615-apss-shared
               - qcom,sc7180-apss-shared
               - qcom,sc8180x-apss-shared
+              - qcom,sm7150-apss-shared
               - qcom,sm8150-apss-shared
           - const: qcom,sdm845-apss-shared
       - items:
@@ -72,6 +73,7 @@ properties:
     description: phandles to the parent clocks of the clock driver
     minItems: 2
     maxItems: 3
+    deprecated: true
 
   '#mbox-cells':
     const: 1
@@ -82,6 +84,23 @@ properties:
   clock-names:
     minItems: 2
     maxItems: 3
+    deprecated: true
+
+  clock-controller:
+    type: object
+    additionalProperties: false
+    properties:
+      clocks:
+        description: phandles to the parent clocks of the clock driver
+        minItems: 2
+        maxItems: 3
+
+      '#clock-cells':
+        enum: [0, 1]
+
+      clock-names:
+        minItems: 2
+        maxItems: 3
 
 required:
   - compatible
@@ -90,6 +109,76 @@ required:
 
 additionalProperties: false
 
+# Clocks should be specified either on the parent node or on the child node
+oneOf:
+  - required:
+      - clock-controller
+    properties:
+      clocks: false
+      clock-names: false
+      '#clock-cells': false
+  - properties:
+      clock-controller: false
+
+$defs:
+  msm8916-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+      clock-names:
+        items:
+          - const: pll
+          - const: aux
+      '#clock-cells':
+        const: 0
+
+  msm8939-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+          - description: reference clock
+      clock-names:
+        items:
+          - const: pll
+          - const: aux
+          - const: ref
+      '#clock-cells':
+        const: 0
+
+  sdx55-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: reference clock
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+      clock-names:
+        items:
+          - const: ref
+          - const: pll
+          - const: aux
+      '#clock-cells':
+        const: 0
+
+  ipq6018-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: XO clock
+          - description: GCC GPLL0 clock source
+      clock-names:
+        items:
+          - const: pll
+          - const: xo
+          - const: gpll0
+      '#clock-cells':
+        const: 1
+
 allOf:
   - if:
       properties:
@@ -98,15 +187,10 @@ allOf:
             enum:
               - qcom,msm8916-apcs-kpss-global
     then:
+      $ref: "#/$defs/msm8916-apcs-clock-controller"
       properties:
-        clocks:
-          items:
-            - description: primary pll parent of the clock driver
-            - description: auxiliary parent
-        clock-names:
-          items:
-            - const: pll
-            - const: aux
+        clock-controller:
+          $ref: "#/$defs/msm8916-apcs-clock-controller"
 
   - if:
       properties:
@@ -115,17 +199,10 @@ allOf:
             enum:
               - qcom,msm8939-apcs-kpss-global
     then:
+      $ref: "#/$defs/msm8939-apcs-clock-controller"
       properties:
-        clocks:
-          items:
-            - description: primary pll parent of the clock driver
-            - description: auxiliary parent
-            - description: reference clock
-        clock-names:
-          items:
-            - const: pll
-            - const: aux
-            - const: ref
+        clock-controller:
+          $ref: "#/$defs/msm8939-apcs-clock-controller"
 
   - if:
       properties:
@@ -134,17 +211,10 @@ allOf:
             enum:
               - qcom,sdx55-apcs-gcc
     then:
+      $ref: "#/$defs/sdx55-apcs-clock-controller"
       properties:
-        clocks:
-          items:
-            - description: reference clock
-            - description: primary pll parent of the clock driver
-            - description: auxiliary parent
-        clock-names:
-          items:
-            - const: ref
-            - const: pll
-            - const: aux
+        clock-controller:
+          $ref: "#/$defs/sdx55-apcs-clock-controller"
 
   - if:
       properties:
@@ -153,17 +223,10 @@ allOf:
             enum:
               - qcom,ipq6018-apcs-apps-global
     then:
+      $ref: "#/$defs/ipq6018-apcs-clock-controller"
       properties:
-        clocks:
-          items:
-            - description: primary pll parent of the clock driver
-            - description: XO clock
-            - description: GCC GPLL0 clock source
-        clock-names:
-          items:
-            - const: pll
-            - const: xo
-            - const: gpll0
+        clock-controller:
+          $ref: "#/$defs/ipq6018-apcs-clock-controller"
 
   - if:
       properties:
@@ -179,19 +242,7 @@ allOf:
       properties:
         clocks: false
         clock-names: false
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq6018-apcs-apps-global
-    then:
-      properties:
-        '#clock-cells':
-          const: 1
-    else:
-      properties:
+        clock-controller: false
         '#clock-cells':
           const: 0
 
@@ -216,6 +267,23 @@ examples:
     };
 
   # Example apcs with qcs404
+  - |
+    #define GCC_APSS_AHB_CLK_SRC  1
+    #define GCC_GPLL0_AO_OUT_MAIN 123
+    mailbox@b011000 {
+        compatible = "qcom,qcs404-apcs-apps-global",
+                     "qcom,msm8916-apcs-kpss-global", "syscon";
+        reg = <0x0b011000 0x1000>;
+        #mbox-cells = <1>;
+
+        apcs_clk: clock-controller {
+          clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+          clock-names = "pll", "aux";
+          #clock-cells = <0>;
+        };
+    };
+
+  # Example apcs with qcs404 (deprecated: use clock-controller subnode)
   - |
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml
new file mode 100644
index 000000000000..24e126bd3a20
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/sophgo,cv1800b-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG2000 mailbox controller
+
+maintainers:
+  - Yuntao Dai <d1581209858@live.com>
+  - Junhui Liu <junhui.liu@pigmoral.tech>
+
+description:
+  Mailboxes integrated in Sophgo CV1800/SG2000 SoCs have 8 channels, each
+  shipping an 8-byte FIFO. Any processor can write to an arbitrary channel
+  and raise interrupts to receivers. Sending messages to itself is also
+  supported.
+
+properties:
+  compatible:
+    const: sophgo,cv1800b-mailbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 2
+    description: |
+      <&phandle channel target>
+      phandle : Label name of mailbox controller
+      channel : 0-7, Channel index
+      target  : 0-3, Target processor ID
+
+      Sophgo CV1800/SG2000 SoCs include the following processors, numbered as:
+      <0> Cortex-A53 (Only available on CV181X/SG200X)
+      <1> C906B
+      <2> C906L
+      <3> 8051
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mailbox@1900000 {
+        compatible = "sophgo,cv1800b-mailbox";
+        reg = <0x01900000 0x1000>;
+        interrupts = <101 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index b3d6db922693..1aa5775ba2bc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -110,7 +110,7 @@ examples:
         reg = <0x01cb4000 0x1000>;
         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_BUS_CSI>,
-                 <&ccu CLK_CSI1_SCLK>,
+                 <&ccu CLK_CSI_SCLK>,
                  <&ccu CLK_DRAM_CSI>;
         clock-names = "bus",
                       "mod",
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
index a61a76bb611c..3ea4a4290f23 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
@@ -79,7 +79,7 @@ examples:
         reg = <0x01cb8000 0x1000>;
         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_BUS_CSI>,
-             <&ccu CLK_CSI1_SCLK>,
+             <&ccu CLK_CSI_SCLK>,
              <&ccu CLK_DRAM_CSI>;
         clock-names = "bus", "mod", "ram";
         resets = <&ccu RST_BUS_CSI>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
index 54e15ab8a7f5..627b28e94354 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -103,7 +103,7 @@ examples:
         reg = <0x01cb1000 0x1000>;
         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_BUS_CSI>,
-                 <&ccu CLK_CSI1_SCLK>;
+                 <&ccu CLK_CSI_SCLK>;
         clock-names = "bus", "mod";
         resets = <&ccu RST_BUS_CSI>;
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml
new file mode 100644
index 000000000000..123bf462f098
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 Image Signal Processing Unit
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  Amlogic ISP is the RAW image processing module
+  and supports three channels image output.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-isp
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: isp
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: isp0
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: input port node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp: isp@ff000000 {
+            compatible = "amlogic,c3-isp";
+            reg = <0x0 0xff000000 0x0 0xf000>;
+            reg-names = "isp";
+            power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+            clocks = <&clkc_periphs CLKID_VAPB>,
+                     <&clkc_periphs CLKID_ISP0>;
+            clock-names = "vapb", "isp0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_ISP0>;
+            assigned-clock-rates = <0>, <400000000>;
+            interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                c3_isp_in: endpoint {
+                    remote-endpoint = <&c3_adap_out>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
new file mode 100644
index 000000000000..ba43bc6709a0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-adapter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 MIPI adapter receiver
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  MIPI adapter is used to convert the MIPI CSI-2 data
+  into an ISP supported data format.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-mipi-adapter
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: top
+      - const: fd
+      - const: rd
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: isp0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: input port node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: output port node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adap: adap@ff010000 {
+            compatible = "amlogic,c3-mipi-adapter";
+            reg = <0x0 0xff010000 0x0 0x100>,
+                  <0x0 0xff01b000 0x0 0x100>,
+                  <0x0 0xff01d000 0x0 0x200>;
+            reg-names = "top", "fd", "rd";
+            power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+            clocks = <&clkc_periphs CLKID_VAPB>,
+                     <&clkc_periphs CLKID_ISP0>;
+            clock-names = "vapb", "isp0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_ISP0>;
+            assigned-clock-rates = <0>, <400000000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    c3_adap_in: endpoint {
+                        remote-endpoint = <&c3_mipi_csi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    c3_adap_out: endpoint {
+                        remote-endpoint = <&c3_isp_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
new file mode 100644
index 000000000000..b0129beab0c3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 MIPI CSI-2 receiver
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
+  It receives the MIPI data from the image sensor and sends MIPI data
+  to MIPI adapter.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-mipi-csi2
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: aphy
+      - const: dphy
+      - const: host
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: phy0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: input port node, connected to sensor.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        csi: csi@ff018000 {
+            compatible = "amlogic,c3-mipi-csi2";
+            reg = <0x0 0xff018000 0x0 0x400>,
+                  <0x0 0xff019000 0x0 0x300>,
+                  <0x0 0xff01a000 0x0 0x100>;
+            reg-names = "aphy", "dphy", "host";
+            power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>;
+            clocks =  <&clkc_periphs CLKID_VAPB>,
+                      <&clkc_periphs CLKID_CSI_PHY0>;
+            clock-names = "vapb", "phy0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_CSI_PHY0>;
+            assigned-clock-rates = <0>, <200000000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    c3_mipi_csi_in: endpoint {
+                        remote-endpoint = <&imx290_out>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    c3_mipi_csi_out: endpoint {
+                        remote-endpoint = <&c3_adap_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
index a6b73498bc21..4b46aa755ccd 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
@@ -14,10 +14,16 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - nvidia,tegra114-cec
-      - nvidia,tegra124-cec
-      - nvidia,tegra210-cec
+    oneOf:
+      - enum:
+          - nvidia,tegra114-cec
+          - nvidia,tegra124-cec
+          - nvidia,tegra210-cec
+      - items:
+          - enum:
+              - nvidia,tegra186-cec
+              - nvidia,tegra194-cec
+          - const: nvidia,tegra210-cec
 
   clocks:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml
new file mode 100644
index 000000000000..25e65a344a0a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx-capture-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Media Video Device
+
+description:
+  This is the media controller node for video capture support. It is a
+  virtual device that lists the camera serial interface nodes that the
+  media device will control
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-capture-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to camera
+      sensor interface ports of IPU devices.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    capture-subsystem {
+        compatible = "fsl,imx-capture-subsystem";
+        ports = <&ipu1_csi0>, <&ipu1_csi1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml
new file mode 100644
index 000000000000..65255f576f26
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI CSI-2 Receiver core in the i.MX SoC
+
+description:
+  This is the device node for the MIPI CSI-2 Receiver core in the i.MX
+  SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
+  combined with a D-PHY core mixed into the same register block. In
+  addition this device consists of an i.MX-specific "CSI2IPU gasket"
+  glue logic, also controlled from the same register block. The CSI2IPU
+  gasket demultiplexes the four virtual channel streams from the host
+  controller's 32-bit output image bus onto four 16-bit parallel busses
+  to the i.MX IPU CSIs.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: hsi_tx (the D-PHY clock)
+      - description: video_27m (D-PHY PLL reference clock)
+      - description: eim_podf;
+
+  clock-names:
+    items:
+      - const: dphy
+      - const: ref
+      - const: pix
+
+  interrupts:
+    items:
+      - description: CSI-2 ERR1 irq
+      - description: CSI-2 ERR2 irq
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Input port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+
+patternProperties:
+  '^port@[1-4]$':
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      ports 1 through 4 are output ports connecting with parallel bus sink
+      endpoint nodes and correspond to the four MIPI CSI-2 virtual channel
+      outputs.
+
+    properties:
+      endpoint@0:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+      endpoint@1:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    mipi@21dc000 {
+        compatible = "fsl,imx6-mipi-csi2";
+        reg = <0x021dc000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+                 <&clks IMX6QDL_CLK_VIDEO_27M>,
+                 <&clks IMX6QDL_CLK_EIM_PODF>;
+        clock-names = "dphy", "ref", "pix";
+
+        port@0 {
+            reg = <0>;
+
+            endpoint {
+                remote-endpoint = <&ov5640_to_mipi_csi2>;
+                clock-lanes = <0>;
+                data-lanes = <1 2>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+            };
+
+            endpoint@1 {
+                reg = <1>;
+                remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ad5820.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ad5820.txt
deleted file mode 100644
index 5764cbedf9b7..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ad5820.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Analog Devices AD5820 autofocus coil
-
-Required Properties:
-
-  - compatible: Must contain one of:
-		- "adi,ad5820"
-		- "adi,ad5821"
-		- "adi,ad5823"
-
-  - reg: I2C slave address
-
-  - VANA-supply: supply of voltage for VANA pin
-
-Optional properties:
-
-   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
-active low, a high level on the pin enables the device.
-
-Example:
-
-       ad5820: coil@c {
-               compatible = "adi,ad5820";
-               reg = <0x0c>;
-
-               VANA-supply = <&vaux4>;
-               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
-       };
-
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
new file mode 100644
index 000000000000..0c8f24f692ca
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,ad5820.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5820 autofocus coil
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  The AD5820 is a current sink driver designed for precise control of
+  voice coil motors (VCMs) in camera autofocus systems.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5820
+      - adi,ad5821
+      - adi,ad5823
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is active low,
+      a high level on the pin enables the device.
+
+  VANA-supply:
+    description: supply of voltage for VANA pin
+
+required:
+  - compatible
+  - reg
+  - VANA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        coil@c {
+            compatible = "adi,ad5820";
+            reg = <0x0c>;
+
+            enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+            VANA-supply = <&vaux4>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adp1653.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/adp1653.txt
rename to Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv7180.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
similarity index 98%
rename from Documentation/devicetree/bindings/media/i2c/adv7180.yaml
rename to Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
index 9ee1483775f6..dee8ce7cb7ba 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV7180 analog video decoder family
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv7343.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/adv7343.txt
rename to Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv748x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
similarity index 98%
rename from Documentation/devicetree/bindings/media/i2c/adv748x.yaml
rename to Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
index d6353081402b..254987350321 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv748x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV748X video decoder with HDMI receiver
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv7604.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
similarity index 98%
rename from Documentation/devicetree/bindings/media/i2c/adv7604.yaml
rename to Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
index 7589d377c686..6c403003cdda 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7604.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/mt9v032.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/mt9v032.txt
rename to Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/max2175.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/max2175.txt
rename to Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/mt9m111.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/mt9m111.txt
rename to Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/tda1997x.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/tda1997x.txt
rename to Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/mt9m001.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/mt9m001.txt
rename to Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
new file mode 100644
index 000000000000..03d476bcf805
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02e10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02E10 CMOS Sensor
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The Omnivision OV02E10 and OV02C10 sensors are 2 megapixel, CMOS image sensors which support:
+  - Automatic black level calibration (ABLC)
+  - Programmable controls for frame rate, mirror and flip, binning, cropping
+    and windowing
+  - OVO2C10
+    - 10 bit RAW Bayer 1920x1080 60 fps 2-lane @ 800 Mbps/lane
+    - 10 bit RAW Bayer 1920x1080 60 fps 1-lane @ 1500 Mbps/lane
+    - 10 bit RAW Bayer 1280x720 60 fps cropped 1-lane @ 960 Mbps/lane
+    - 10 bit RGB/BW 640x480 60 fps bin2 or skip2 1-lane @ 800 Mbps/lane
+    - 10 bit RGB/BW 480x270 60 fps bin4 or skip4 1-lane @ 800 Mbps/lane
+  - OV02E10
+    - 10 bit RAW Bayer 1920x1088 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit RAW Bayer 1280x1080 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit Quad Bayer 960x540 60 fps 2-lane 360 Mbps/lane
+    - 8 bit Quad Bayer 480x270 1/3/5/10 fps sub2 288 Mbps/lane
+    - 8 bit Quad Bayer 232x132 1/3/5/10 fps sub4 144 Mbps/lane
+  - Dynamic defect pixel cancellation
+  - Standard SCCB command interface
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov02c10
+      - ovti,ov02e10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+          link-frequencies: true
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02e10: camera@10 {
+            compatible = "ovti,ov02e10";
+            reg = <0x10>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02e10_clk>;
+
+            assigned-clocks = <&ov02e10_clk>;
+            assigned-clock-parents = <&ov02e10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02e10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+
+        ov02c10: camera@36 {
+            compatible = "ovti,ov02c10";
+            reg = <0x36>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02c10_clk>;
+
+            assigned-clocks = <&ov02c10_clk>;
+            assigned-clock-parents = <&ov02c10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02c10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ov2640.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ov2640.txt
rename to Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ov2659.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ov2659.txt
rename to Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ov7670.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ov7670.txt
rename to Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ov7740.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ov7740.txt
rename to Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ov9650.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ov9650.txt
rename to Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/imx219.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
similarity index 94%
rename from Documentation/devicetree/bindings/media/i2c/imx219.yaml
rename to Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
index 07d088cf66e0..38c3759bcd9f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
@@ -16,6 +16,9 @@ description: |-
   Image data is sent through MIPI CSI-2, which is configured as either 2 or
   4 data lanes.
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: sony,imx219
@@ -79,7 +82,7 @@ required:
   - VDDL-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
index fa69bd21c8da..990acf89af8f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -136,7 +136,7 @@ examples:
             port {
                 imx290_ep: endpoint {
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <445500000>;
+                    link-frequencies = /bits/ 64 <222750000 148500000>;
                     remote-endpoint = <&csiphy0_ep>;
                 };
             };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
index 34962c5c7006..7c11e871dca6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sony IMX415 CMOS Image Sensor
 
 maintainers:
-  - Michael Riesch <michael.riesch@wolfvision.net>
+  - Michael Riesch <michael.riesch@collabora.com>
 
 description: |-
   The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
new file mode 100644
index 000000000000..3c071e6fbea6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd55g1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD55G1 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ The STMicroelectronics VD55G1 is a global shutter image sensor with an active
+ array size of 804H x 704V. It is programmable through I2C interface. The I2C
+ address is fixed to 0x10.
+
+ Image data is sent through MIPI CSI-2, which is configured as only 1 data
+ lane. The sensor provides 4 GPIOS that can be used for external LED signal
+ (synchronized with sensor integration periods).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: st,vd55g1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination
+      system is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              minimum: 125000000
+              maximum: 600000000
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd55g1";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <2>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
new file mode 100644
index 000000000000..c6673b8539db
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd56g3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD56G3 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
+  with an active array size of 1124 x 1364 (portrait orientation). It is
+  programmable through I2C, the address is fixed to 0x10. The sensor output is
+  available via CSI-2, which is configured as either 1 or 2 data lanes. The
+  sensor provides 8 GPIOS that can be used for external LED signal
+  (synchronized with sensor integration periods)
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,vd56g3
+      - st,vd66gy
+    description:
+      Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
+      is a colour variant.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination system
+      is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 7
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              enum: [402000000, 750000000]
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 3
+            description: Any lane can be inverted or not.
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd56g3";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <6>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <402000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
index 2030366994d1..2e129bf573b7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
@@ -38,6 +38,13 @@ properties:
   '#clock-cells':
     const: 0
 
+  reg:
+    maxItems: 1
+    description:
+      The strap I2C address of the serializer. Can be used by the deserializer
+      to communicate over back-channel when the forward-channel is not yet
+      active.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -81,51 +88,57 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    serializer {
-      compatible = "ti,ds90ub953-q1";
+    link {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      serializer@18 {
+        compatible = "ti,ds90ub953-q1";
+        reg = <0x18>;
 
-      gpio-controller;
-      #gpio-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
 
-      #clock-cells = <0>;
+        #clock-cells = <0>;
 
-      ports {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        port@0 {
-          reg = <0>;
-          ub953_in: endpoint {
-            clock-lanes = <0>;
-            data-lanes = <1 2 3 4>;
-            remote-endpoint = <&sensor_out>;
+          port@0 {
+            reg = <0>;
+            ub953_in: endpoint {
+              clock-lanes = <0>;
+              data-lanes = <1 2 3 4>;
+              remote-endpoint = <&sensor_out>;
+            };
           };
-        };
 
-        port@1 {
-          reg = <1>;
-          endpoint {
-            remote-endpoint = <&deser_fpd_in>;
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&deser_fpd_in>;
+            };
           };
         };
-      };
 
-      i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
 
-        sensor@1a {
-          compatible = "sony,imx274";
-          reg = <0x1a>;
+          sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
 
-          reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
 
-          clocks = <&serializer>;
-          clock-names = "inck";
+            clocks = <&serializer>;
+            clock-names = "inck";
 
-          port {
-            sensor_out: endpoint {
-              remote-endpoint = <&ub953_in>;
+            port {
+              sensor_out: endpoint {
+                remote-endpoint = <&ub953_in>;
+              };
             };
           };
         };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
index 0b71e6f911a8..4dcbd2b039a5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -68,6 +68,12 @@ properties:
             description: The link number
             maxItems: 1
 
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
           i2c-alias:
             $ref: /schemas/types.yaml#/definitions/uint32
             description:
@@ -107,7 +113,8 @@ properties:
             maximum: 14
             description: Manual EQ level
 
-          serializer:
+        patternProperties:
+          '^serializer(@[0-9a-f]+)*$':
             type: object
             description: FPD-Link Serializer node
 
@@ -115,7 +122,6 @@ properties:
           - reg
           - i2c-alias
           - ti,rx-mode
-          - serializer
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -309,13 +315,17 @@ examples:
           /* Link 0 has DS90UB953 serializer and IMX274 sensor */
 
           link@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
             reg = <0>;
             i2c-alias = <0x44>;
 
             ti,rx-mode = <3>;
 
-            serializer1: serializer {
+            serializer1: serializer@30 {
               compatible = "ti,ds90ub953-q1";
+              reg = <0x30>;
 
               gpio-controller;
               #gpio-cells = <2>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/ths8200.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/ths8200.txt
rename to Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/tvp514x.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/tvp514x.txt
rename to Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/tvp5150.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/tvp5150.txt
rename to Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/tvp7002.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/tvp7002.txt
rename to Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/i2c/tc358743.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
similarity index 100%
rename from Documentation/devicetree/bindings/media/i2c/tc358743.txt
rename to Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/imx.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/imx.txt
deleted file mode 100644
index 77f4b0a7fd2b..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/imx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Freescale i.MX Media Video Device
-=================================
-
-Video Media Controller node
----------------------------
-
-This is the media controller node for video capture support. It is a
-virtual device that lists the camera serial interface nodes that the
-media device will control.
-
-Required properties:
-- compatible : "fsl,imx-capture-subsystem";
-- ports      : Should contain a list of phandles pointing to camera
-		sensor interface ports of IPU devices
-
-example:
-
-capture-subsystem {
-	compatible = "fsl,imx-capture-subsystem";
-	ports = <&ipu1_csi0>, <&ipu1_csi1>;
-};
-
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 Receiver core in the i.MX
-SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
-combined with a D-PHY core mixed into the same register block. In
-addition this device consists of an i.MX-specific "CSI2IPU gasket"
-glue logic, also controlled from the same register block. The CSI2IPU
-gasket demultiplexes the four virtual channel streams from the host
-controller's 32-bit output image bus onto four 16-bit parallel busses
-to the i.MX IPU CSIs.
-
-Required properties:
-- compatible	: "fsl,imx6-mipi-csi2";
-- reg           : physical base address and length of the register set;
-- clocks	: the MIPI CSI-2 receiver requires three clocks: hsi_tx
-		  (the D-PHY clock), video_27m (D-PHY PLL reference
-		  clock), and eim_podf;
-- clock-names	: must contain "dphy", "ref", "pix";
-- port@*        : five port nodes must exist, containing endpoints
-		  connecting to the source and sink devices according to
-		  of_graph bindings. The first port is an input port,
-		  connecting with a MIPI CSI-2 source, and ports 1
-		  through 4 are output ports connecting with parallel
-		  bus sink endpoint nodes and correspond to the four
-		  MIPI CSI-2 virtual channel outputs.
-
-Optional properties:
-- interrupts	: must contain two level-triggered interrupts,
-		  in order: 100 and 101;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
index 03f31b009085..40fda59fa8a8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
@@ -16,8 +16,12 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8195-mdp3-fg
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-fg
+      - items:
+          - const: mediatek,mt8188-mdp3-fg
+          - const: mediatek,mt8195-mdp3-fg
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
index d4609bba6578..d9f926c20220 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
@@ -16,8 +16,12 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8195-mdp3-hdr
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-hdr
+      - items:
+          - const: mediatek,mt8188-mdp3-hdr
+          - const: mediatek,mt8195-mdp3-hdr
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
index f5676bec4326..8124c39d73e9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -20,6 +20,7 @@ properties:
           - mediatek,mt8183-mdp3-rsz
       - items:
           - enum:
+              - mediatek,mt8188-mdp3-rsz
               - mediatek,mt8195-mdp3-rsz
           - const: mediatek,mt8183-mdp3-rsz
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
index d815bea29154..1d8e7e202c42 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
@@ -16,8 +16,12 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8195-mdp3-stitch
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-stitch
+      - items:
+          - const: mediatek,mt8188-mdp3-stitch
+          - const: mediatek,mt8195-mdp3-stitch
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
index 14ea556d4f82..6cff7c073ce4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
@@ -17,8 +17,12 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8195-mdp3-tcc
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-tcc
+      - items:
+          - const: mediatek,mt8188-mdp3-tcc
+          - const: mediatek,mt8195-mdp3-tcc
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
index 8ab7f2d8e148..cdfa27324738 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
@@ -16,8 +16,12 @@ description:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8195-mdp3-tdshp
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-tdshp
+      - items:
+          - const: mediatek,mt8188-mdp3-tdshp
+          - const: mediatek,mt8195-mdp3-tdshp
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
index 53a679338402..b6269f4f9fd6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -20,6 +20,7 @@ properties:
           - mediatek,mt8183-mdp3-wrot
       - items:
           - enum:
+              - mediatek,mt8188-mdp3-wrot
               - mediatek,mt8195-mdp3-wrot
           - const: mediatek,mt8183-mdp3-wrot
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index 3469a43f00d4..7c8e0a905d89 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -93,6 +93,10 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -112,6 +116,10 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
index 8856fba385b1..6d776b0ca711 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
@@ -112,6 +112,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -131,6 +136,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -150,6 +160,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 644646de338a..a2025952fe95 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -115,6 +115,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -134,6 +139,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -153,6 +163,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -172,6 +187,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 83c4a5d95f02..bfd8b1ad4731 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -18,7 +18,12 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,sc7180-venus
+    oneOf:
+      - items:
+          - enum:
+              - qcom,qcs615-venus
+          - const: qcom,sc7180-venus
+      - const: qcom,sc7180-venus
 
   power-domains:
     minItems: 2
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
index 9936f0132417..d195f1bfb23d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -143,6 +143,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -166,6 +171,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -189,6 +199,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -212,6 +227,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 68d8670557f5..6e6ad8390e44 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -121,6 +121,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -140,6 +145,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -159,6 +169,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -178,6 +193,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 289494f561e5..82bf4689d330 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -108,6 +108,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -127,6 +132,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -146,6 +156,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
@@ -165,6 +180,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - data-lanes
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
index a372d991e652..ebf68ff4ab96 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -128,6 +128,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -151,6 +156,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -174,6 +184,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -197,6 +212,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -220,6 +240,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
@@ -243,6 +268,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
               - clock-lanes
               - data-lanes
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml
index e424ea84c211..c79bf2101812 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml
@@ -14,12 +14,17 @@ description:
   The iris video processing unit is a video encode and decode accelerator
   present on Qualcomm platforms.
 
-allOf:
-  - $ref: qcom,venus-common.yaml#
-
 properties:
   compatible:
-    const: qcom,sm8550-iris
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sa8775p-iris
+          - const: qcom,sm8550-iris
+      - enum:
+          - qcom,qcs8300-iris
+          - qcom,sm8550-iris
+          - qcom,sm8650-iris
 
   power-domains:
     maxItems: 4
@@ -49,11 +54,15 @@ properties:
       - const: video-mem
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   reset-names:
+    minItems: 1
     items:
       - const: bus
+      - const: xo
+      - const: core
 
   iommus:
     maxItems: 2
@@ -75,6 +84,26 @@ required:
   - iommus
   - dma-coherent
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-iris
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          minItems: 3
+    else:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
new file mode 100644
index 000000000000..113565cf2a99
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,x1e80100-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,x1e80100-camss
+
+  reg:
+    maxItems: 17
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_wrapper
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy4
+      - const: csitpg0
+      - const: csitpg1
+      - const: csitpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 29
+
+  clock-names:
+    items:
+      - const: camnoc_nrt_axi
+      - const: camnoc_rt_axi
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: cpas_fast_ahb
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe_lite
+      - const: cphy_rx_clk_src
+      - const: csid
+      - const: csid_csiphy_rx
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 13
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy4
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_mnoc
+      - const: sf_mnoc
+      - const: sf_icp_mnoc
+
+  iommus:
+    maxItems: 8
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  vdd-csiphy-0p8-supply:
+    description:
+      Phandle to a 0.8V regulator supply to a PHY.
+
+  vdd-csiphy-1p2-supply:
+    description:
+      Phandle to 1.8V regulator supply to a PHY.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data from a CSIPHY.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdd-csiphy-0p8-supply
+  - vdd-csiphy-1p2-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/clock/qcom,x1e80100-camcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: isp@acb6000 {
+            compatible = "qcom,x1e80100-camss";
+
+            reg = <0 0x0acb7000 0 0x2000>,
+                  <0 0x0acb9000 0 0x2000>,
+                  <0 0x0acbb000 0 0x2000>,
+                  <0 0x0acc6000 0 0x1000>,
+                  <0 0x0acca000 0 0x1000>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x1000>,
+                  <0 0x0ace6000 0 0x1000>,
+                  <0 0x0ace8000 0 0x1000>,
+                  <0 0x0acec000 0 0x4000>,
+                  <0 0x0acf6000 0 0x1000>,
+                  <0 0x0acf7000 0 0x1000>,
+                  <0 0x0acf8000 0 0x1000>,
+                  <0 0x0ac62000 0 0x4000>,
+                  <0 0x0ac71000 0 0x4000>,
+                  <0 0x0acc7000 0 0x2000>,
+                  <0 0x0accb000 0 0x2000>;
+
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_wrapper",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy4",
+                        "csitpg0",
+                        "csitpg1",
+                        "csitpg2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+            clock-names = "camnoc_nrt_axi",
+                          "camnoc_rt_axi",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "cpas_fast_ahb",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe_lite",
+                          "cphy_rx_clk_src",
+                          "csid",
+                          "csid_csiphy_rx",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+           interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy4",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+            interconnect-names = "ahb",
+                                 "hf_mnoc",
+                                 "sf_mnoc",
+                                 "sf_icp_mnoc";
+
+            iommus = <&apps_smmu 0x800 0x60>,
+                     <&apps_smmu 0x860 0x60>,
+                     <&apps_smmu 0x1800 0x60>,
+                     <&apps_smmu 0x1860 0x60>,
+                     <&apps_smmu 0x18e0 0x00>,
+                     <&apps_smmu 0x1980 0x20>,
+                     <&apps_smmu 0x1900 0x00>,
+                     <&apps_smmu 0x19a0 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdd-csiphy-0p8-supply = <&csiphy_0p8_supply>;
+            vdd-csiphy-1p2-supply = <&csiphy_1p2_supply>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    csiphy_ep0: endpoint {
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,fcp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,fcp.yaml
index f94dacd96278..7bf1266223e8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,fcp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -30,14 +30,24 @@ properties:
               - renesas,r9a07g043u-fcpvd # RZ/G2UL
               - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
               - renesas,r9a07g054-fcpvd # RZ/V2L
+              - renesas,r9a09g057-fcpvd # RZ/V2H(P)
           - const: renesas,fcpv         # Generic FCP for VSP fallback
 
   reg:
     maxItems: 1
 
-  clocks: true
+  clocks:
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
 
-  clock-names: true
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
 
   iommus:
     maxItems: 1
@@ -66,18 +76,11 @@ allOf:
               - renesas,r9a07g043u-fcpvd
               - renesas,r9a07g044-fcpvd
               - renesas,r9a07g054-fcpvd
+              - renesas,r9a09g057-fcpvd
     then:
       properties:
         clocks:
-          items:
-            - description: Main clock
-            - description: Register access clock
-            - description: Video clock
-        clock-names:
-          items:
-            - const: aclk
-            - const: pclk
-            - const: vclk
+          minItems: 3
       required:
         - clock-names
     else:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,isp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,isp.yaml
index c4de4555b753..d25e020f5e5e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,isp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,isp.yaml
@@ -25,19 +25,55 @@ properties:
           - renesas,r8a779h0-isp # V4M
       - const: renesas,rcar-gen4-isp # Generic R-Car Gen4
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   power-domains:
     maxItems: 1
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
+
+  renesas,vspx:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the companion VSPX responsible for the Streaming Bridge
+      functionality. The Streaming Bridge is responsible for feeding image
+      and configuration data to the ISP when operating in memory-to-memory
+      mode.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -103,10 +139,14 @@ properties:
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
+  - interrupt-names
   - clocks
+  - clock-names
   - power-domains
   - resets
+  - reset-names
   - ports
 
 additionalProperties: false
@@ -119,11 +159,18 @@ examples:
 
     isp1: isp@fed20000 {
             compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp";
-            reg = <0xfed20000 0x10000>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 613>;
+            reg = <0xfed20000 0x10000>, <0xfee00000 0x100000>;
+            reg-names = "cs", "core";
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "cs", "core";
+            clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+            clock-names = "cs", "core";
             power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-            resets = <&cpg 613>;
+            resets = <&cpg 613>, <&cpg 17>;
+            reset-names = "cs", "core";
+
+            renesas,vspx = <&vspx1>;
 
             ports {
                     #address-cells = <1>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
index bc1245127025..47e18690fa57 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -17,24 +17,43 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g043-cru       # RZ/G2UL
-          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
-          - renesas,r9a07g054-cru       # RZ/V2L
-      - const: renesas,rzg2l-cru
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-cru       # RZ/G2UL
+              - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+              - renesas,r9a07g054-cru       # RZ/V2L
+          - const: renesas,rzg2l-cru
+      - const: renesas,r9a09g047-cru        # RZ/G3E
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 3
+    oneOf:
+      - items:
+          - description: CRU Interrupt for image_conv
+          - description: CRU Interrupt for image_conv_err
+          - description: CRU AXI master error interrupt
+      - items:
+          - description: CRU Interrupt for image_conv
+          - description: CRU AXI master error interrupt
+          - description: CRU Video Data AXI Master Address 0 Write End interrupt
+          - description: CRU Statistics data AXI master addr 0 write end interrupt
+          - description: CRU Video statistics data AXI master addr 0 write end interrupt
 
   interrupt-names:
-    items:
-      - const: image_conv
-      - const: image_conv_err
-      - const: axi_mst_err
+    oneOf:
+      - items:
+          - const: image_conv
+          - const: image_conv_err
+          - const: axi_mst_err
+      - items:
+          - const: image_conv
+          - const: axi_mst_err
+          - const: vd_addr_wend
+          - const: sd_addr_wend
+          - const: vsd_addr_wend
 
   clocks:
     items:
@@ -109,6 +128,10 @@ allOf:
               - renesas,r9a07g054-cru
     then:
       properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
         ports:
           required:
             - port@0
@@ -122,10 +145,30 @@ allOf:
               - renesas,r9a07g043-cru
     then:
       properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
         ports:
           properties:
             port@0: false
+          required:
+            - port@1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-cru
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+        interrupt-names:
+          minItems: 5
+        ports:
+          properties:
+            port@0: false
           required:
             - port@1
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
index 7faa12fecd5b..c5c511c9f0db 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -17,12 +17,17 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g043-csi2       # RZ/G2UL
-          - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
-          - renesas,r9a07g054-csi2       # RZ/V2L
-      - const: renesas,rzg2l-csi2
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-csi2 # RZ/G2UL
+              - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
+              - renesas,r9a07g054-csi2 # RZ/V2L
+          - const: renesas,rzg2l-csi2
+      - items:
+          - const: renesas,r9a09g047-csi2 # RZ/G3E
+          - const: renesas,r9a09g057-csi2
+      - const: renesas,r9a09g057-csi2 # RZ/V2H(P)
 
   reg:
     maxItems: 1
@@ -31,16 +36,24 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: Internal clock for connecting CRU and MIPI
-      - description: CRU Main clock
-      - description: CRU Register access clock
+    oneOf:
+      - items:
+          - description: Internal clock for connecting CRU and MIPI
+          - description: CRU Main clock
+          - description: CRU Register access clock
+      - items:
+          - description: CRU Main clock
+          - description: CRU Register access clock
 
   clock-names:
-    items:
-      - const: system
-      - const: video
-      - const: apb
+    oneOf:
+      - items:
+          - const: system
+          - const: video
+          - const: apb
+      - items:
+          - const: video
+          - const: apb
 
   power-domains:
     maxItems: 1
@@ -48,7 +61,7 @@ properties:
   resets:
     items:
       - description: CRU_PRESETN reset terminal
-      - description: CRU_CMN_RSTB reset terminal
+      - description: D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)
 
   reset-names:
     items:
@@ -101,6 +114,25 @@ required:
   - reset-names
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-csi2
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,vsp1.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index 1a03e67462a4..fcf7219b1f40 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -25,6 +25,7 @@ properties:
           - enum:
               - renesas,r9a07g043u-vsp2   # RZ/G2UL
               - renesas,r9a07g054-vsp2    # RZ/V2L
+              - renesas,r9a09g057-vsp2    # RZ/V2H(P)
           - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
 
   reg:
@@ -33,8 +34,18 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: true
-  clock-names: true
+  clocks:
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
 
   power-domains:
     maxItems: 1
@@ -78,15 +89,7 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Main clock
-            - description: Register access clock
-            - description: Video clock
-        clock-names:
-          items:
-            - const: aclk
-            - const: pclk
-            - const: vclk
+          minItems: 3
       required:
         - clock-names
     else:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 2f36ac23604c..0762e0ff66ef 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -33,6 +33,7 @@ properties:
           - mediatek,mt2712-smi-common
           - mediatek,mt6779-smi-common
           - mediatek,mt6795-smi-common
+          - mediatek,mt6893-smi-common
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2381660b324c..2e7fac4b5094 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -21,6 +21,7 @@ properties:
           - mediatek,mt2712-smi-larb
           - mediatek,mt6779-smi-larb
           - mediatek,mt6795-smi-larb
+          - mediatek,mt6893-smi-larb
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml
new file mode 100644
index 000000000000..2bfe63ec62dc
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rzg3e-xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Expanded Serial Peripheral Interface (xSPI)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  Renesas xSPI allows a SPI flash connected to the SoC to be accessed via
+  the memory-mapping or the manual command mode.
+
+  The flash chip itself should be represented by a subnode of the XSPI node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  -  "jedec,spi-nor";
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,r9a09g047-xspi  # RZ/G3E
+
+  reg:
+    items:
+      - description: xSPI registers
+      - description: direct mapping area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+
+  interrupts:
+    items:
+      - description: Interrupt pulse signal by factors excluding errors
+      - description: Interrupt pulse signal by error factors
+
+  interrupt-names:
+    items:
+      - const: pulse
+      - const: err_pulse
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: AXI clock
+      - description: SPI clock
+      - description: Double speed SPI clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: spi
+      - const: spix2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Hardware reset
+      - description: AXI reset
+
+  reset-names:
+    items:
+      - const: hresetn
+      - const: aresetn
+
+  renesas,xspi-cs-addr-sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system controller (sys) that allows to configure
+      xSPI CS0 and CS1 addresses.
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: jedec,spi-nor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+
+    spi@11030000 {
+        compatible = "renesas,r9a09g047-xspi";
+        reg = <0x11030000 0x10000>, <0x20000000 0x10000000>;
+        reg-names = "regs", "dirmap";
+        interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "pulse", "err_pulse";
+        clocks = <&cpg CPG_MOD 0x9f>, <&cpg CPG_MOD 0xa0>,
+                 <&cpg CPG_CORE 9>, <&cpg CPG_MOD 0xa1>;
+        clock-names = "ahb", "axi", "spi", "spix2";
+        power-domains = <&cpg>;
+        resets = <&cpg 0xa3>, <&cpg 0xa4>;
+        reset-names = "hresetn", "aresetn";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "jedec,spi-nor";
+          reg = <0>;
+          spi-max-frequency = <40000000>;
+          spi-tx-bus-width = <1>;
+          spi-rx-bus-width = <1>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
new file mode 100644
index 000000000000..344878db8818
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32mp25-omm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Octo Memory Manager (OMM)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description: |
+  The STM32 Octo Memory Manager is a low-level interface that enables an
+  efficient OCTOSPI pin assignment with a full I/O matrix (before alternate
+  function map) and multiplex of single/dual/quad/octal SPI interfaces over
+  the same bus. It Supports up to:
+    - Two single/dual/quad/octal SPI interfaces
+    - Two ports for pin assignment
+
+properties:
+  compatible:
+    const: st,stm32mp25-omm
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout per OSPI instance.
+      Format:
+      <chip-select> 0 <registers base address> <size>
+    minItems: 2
+    maxItems: 2
+
+  reg:
+    items:
+      - description: OMM registers
+      - description: OMM memory map area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: memory_map
+
+  memory-region:
+    description:
+      Memory region shared between the 2 OCTOSPI instance.
+      One or two phandle to a node describing a memory mapped region
+      depending of child number.
+    minItems: 1
+    maxItems: 2
+
+  memory-region-names:
+    description:
+      Identify to which OSPI instance the memory region belongs to.
+    items:
+      enum: [ospi1, ospi2]
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  access-controllers:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  st,syscfg-amcr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      The Address Mapping Control Register (AMCR) is used to split the 256MB
+      memory map area shared between the 2 OSPI instance. The Octo Memory
+      Manager sets the AMCR depending of the memory-region configuration.
+      The memory split bitmask description is:
+        - 000: OCTOSPI1 (256 Mbytes), OCTOSPI2 unmapped
+        - 001: OCTOSPI1 (192 Mbytes), OCTOSPI2 (64 Mbytes)
+        - 010: OCTOSPI1 (128 Mbytes), OCTOSPI2 (128 Mbytes)
+        - 011: OCTOSPI1 (64 Mbytes), OCTOSPI2 (192 Mbytes)
+        - 1xx: OCTOSPI1 unmapped, OCTOSPI2 (256 Mbytes)
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for memory split
+
+  st,omm-req2ack-ns:
+    description:
+      In multiplexed mode (MUXEN = 1), this field defines the time in
+      nanoseconds between two transactions.
+    default: 0
+
+  st,omm-cssel-ovr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the chip select selector override for the 2 OCTOSPIs.
+      - 0: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS1
+      - 1: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS1
+      - 2: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS2
+      - 3: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  st,omm-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the muxing between the 2 OCTOSPIs busses and the 2 output ports.
+      - 0: direct mode
+      - 1: mux OCTOSPI1 and OCTOSPI2 to port 1
+      - 2: swapped mode
+      - 3: mux OCTOSPI1 and OCTOSPI2 to port 2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+patternProperties:
+  ^spi@[0-9]:
+    type: object
+    $ref: /schemas/spi/st,stm32mp25-ospi.yaml#
+    description: Required spi child node
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - st,syscfg-amcr
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+    ommanager@40500000 {
+      compatible = "st,stm32mp25-omm";
+      reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+      reg-names = "regs", "memory_map";
+      ranges = <0 0 0x40430000 0x400>,
+               <1 0 0x40440000 0x400>;
+      memory-region = <&mm_ospi1>, <&mm_ospi2>;
+      memory-region-names = "ospi1", "ospi2";
+      pinctrl-0 = <&ospi_port1_clk_pins_a
+                   &ospi_port1_io03_pins_a
+                   &ospi_port1_cs0_pins_a>;
+      pinctrl-1 = <&ospi_port1_clk_sleep_pins_a
+                   &ospi_port1_io03_sleep_pins_a
+                   &ospi_port1_cs0_sleep_pins_a>;
+      pinctrl-names = "default", "sleep";
+      clocks = <&rcc CK_BUS_OSPIIOM>,
+               <&scmi_clk CK_SCMI_OSPI1>,
+               <&scmi_clk CK_SCMI_OSPI2>;
+      clock-names = "omm", "ospi1", "ospi2";
+      resets = <&rcc OSPIIOM_R>,
+               <&scmi_reset RST_SCMI_OSPI1>,
+               <&scmi_reset RST_SCMI_OSPI2>;
+      reset-names = "omm", "ospi1", "ospi2";
+      access-controllers = <&rifsc 111>;
+      power-domains = <&CLUSTER_PD>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+      st,omm-req2ack-ns = <0>;
+      st,omm-mux = <0>;
+      st,omm-cssel-ovr = <0>;
+
+      spi@0 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <0 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 2 0x62 0x00003121 0x0>,
+               <&hpdma 2 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_SCMI_OSPI1>;
+        resets = <&scmi_reset RST_SCMI_OSPI1>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 74>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+
+      spi@1 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <1 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 3 0x62 0x00003121 0x0>,
+               <&hpdma 3 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_KER_OSPI2>;
+        resets = <&scmi_reset RST_SCMI_OSPI2>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 75>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
index c800d5e53b65..5eccd10d95ce 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -66,8 +66,15 @@ patternProperties:
       - compatible
 
   '^interrupt-controller@[0-9a-f]+$':
-    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
     type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - aspeed,ast2500-scu-ic
+            - aspeed,ast2600-scu-ic0
+            - aspeed,ast2600-scu-ic1
 
   '^silicon-id@[0-9a-f]+$':
     description: Unique hardware silicon identifiers within the SoC
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml
index f805545aa62a..f6f47999c6c1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml
@@ -19,6 +19,7 @@ properties:
       - items:
           - enum:
               - atmel,at91sam9260-gpbr
+              - microchip,sama7d65-gpbr
           - const: syscon
       - items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
deleted file mode 100644
index be51a15e05f9..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
+++ /dev/null
@@ -1,39 +0,0 @@
--------------------------------
-BCM590xx Power Management Units
--------------------------------
-
-Required properties:
-- compatible: "brcm,bcm59056"
-- reg: I2C slave address
-- interrupts: interrupt for the PMU. Generic interrupt client node bindings
-  are described in interrupt-controller/interrupts.txt
-
-------------------
-Voltage Regulators
-------------------
-
-Optional child nodes:
-- regulators: container node for regulators following the generic
-  regulator binding in regulator/regulator.txt
-
-  The valid regulator node names for BCM59056 are:
-  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
-	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
-	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
-	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
-	vbus
-
-Example:
-	pmu: bcm59056@8 {
-		compatible = "brcm,bcm59056";
-		reg = <0x08>;
-		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-		regulators {
-			rfldo_reg: rfldo {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			...
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
new file mode 100644
index 000000000000..b67d7a723fc2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm59056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM590xx Power Management Units
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm59054
+      - brcm,bcm59056
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm59054
+    then:
+      properties:
+        regulators:
+          $ref: /schemas/regulator/brcm,bcm59054.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm59056
+    then:
+      properties:
+        regulators:
+          $ref: /schemas/regulator/brcm,bcm59056.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "brcm,bcm59056";
+            reg = <0x08>;
+            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+
+            regulators {
+                rfldo {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index d5b3fd6628a2..ecf7d9e1d3f7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -60,43 +60,34 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            iqs620a@44 {
-                    compatible = "azoteq,iqs620a";
-                    reg = <0x44>;
-                    interrupt-parent = <&gpio>;
-                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-
-                    keys {
-                            compatible = "azoteq,iqs620a-keys";
-
-                            linux,keycodes = <KEY_SELECT>,
-                                             <KEY_MENU>,
-                                             <KEY_OK>,
-                                             <KEY_MENU>;
-
-                            hall-switch-south {
-                                    linux,code = <SW_LID>;
-                                    azoteq,use-prox;
-                            };
-                    };
-
-                    iqs620a_pwm: pwm {
-                            compatible = "azoteq,iqs620a-pwm";
-                            #pwm-cells = <2>;
-                    };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        iqs620a@44 {
+            compatible = "azoteq,iqs620a";
+            reg = <0x44>;
+            interrupt-parent = <&gpio>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+            keys {
+                compatible = "azoteq,iqs620a-keys";
+
+                linux,keycodes = <KEY_SELECT>,
+                                 <KEY_MENU>,
+                                 <KEY_OK>,
+                                 <KEY_MENU>;
+
+                hall-switch-south {
+                    linux,code = <SW_LID>;
+                    azoteq,use-prox;
+                };
             };
-    };
-
-    pwmleds {
-            compatible = "pwm-leds";
 
-            led-1 {
-                    pwms = <&iqs620a_pwm 0 1000000>;
-                    max-brightness = <255>;
+            iqs620a_pwm: pwm {
+                compatible = "azoteq,iqs620a-pwm";
+                #pwm-cells = <2>;
             };
+        };
     };
 
   - |
@@ -105,37 +96,37 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            iqs620a@44 {
-                    compatible = "azoteq,iqs620a";
-                    reg = <0x44>;
-                    interrupt-parent = <&gpio>;
-                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-
-                    firmware-name = "/*(DEBLOBBED)*/";
-
-                    keys {
-                            compatible = "azoteq,iqs620a-keys";
-
-                            linux,keycodes = <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <KEY_MUTE>;
-
-                            hall-switch-north {
-                                    linux,code = <SW_DOCK>;
-                            };
-
-                            hall-switch-south {
-                                    linux,code = <SW_TABLET_MODE>;
-                            };
-                    };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        iqs620a@44 {
+            compatible = "azoteq,iqs620a";
+            reg = <0x44>;
+            interrupt-parent = <&gpio>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+            firmware-name = "/*(DEBLOBBED)*/";
+
+            keys {
+                compatible = "azoteq,iqs620a-keys";
+
+                linux,keycodes = <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <KEY_MUTE>;
+
+                hall-switch-north {
+                    linux,code = <SW_DOCK>;
+                };
+
+                hall-switch-south {
+                    linux,code = <SW_TABLET_MODE>;
+                };
             };
+        };
     };
 
   - |
@@ -144,36 +135,36 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            iqs624@44 {
-                    compatible = "azoteq,iqs624";
-                    reg = <0x44>;
-                    interrupt-parent = <&gpio>;
-                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-
-                    keys {
-                            compatible = "azoteq,iqs624-keys";
-
-                            linux,keycodes = <BTN_0>,
-                                             <0>,
-                                             <BTN_1>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <0>,
-                                             <KEY_VOLUMEUP>,
-                                             <KEY_VOLUMEDOWN>;
-                    };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        iqs624@44 {
+            compatible = "azoteq,iqs624";
+            reg = <0x44>;
+            interrupt-parent = <&gpio>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+            keys {
+                compatible = "azoteq,iqs624-keys";
+
+                linux,keycodes = <BTN_0>,
+                                 <0>,
+                                 <BTN_1>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <0>,
+                                 <KEY_VOLUMEUP>,
+                                 <KEY_VOLUMEDOWN>;
             };
+        };
     };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml
new file mode 100644
index 000000000000..525de9ab3c2b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77759.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77759 PMIC for USB Type-C applications
+
+maintainers:
+  - André Draszik <andre.draszik@linaro.org>
+
+description: |
+  This is a part of device tree bindings for the MAX77759 companion Power
+  Management IC for USB Type-C applications.
+
+  The MAX77759 includes Battery Charger, Fuel Gauge, temperature sensors, USB
+  Type-C Port Controller (TCPC), NVMEM, and a GPIO expander.
+
+properties:
+  compatible:
+    const: maxim,max77759
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  reg:
+    maxItems: 1
+
+  gpio:
+    $ref: /schemas/gpio/maxim,max77759-gpio.yaml
+
+  nvmem-0:
+    $ref: /schemas/nvmem/maxim,max77759-nvmem.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77759";
+            reg = <0x66>;
+            interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            gpio {
+                compatible = "maxim,max77759-gpio";
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            nvmem-0 {
+                compatible = "maxim,max77759-nvmem";
+
+                nvmem-layout {
+                    compatible = "fixed-layout";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    reboot-mode@0 {
+                        reg = <0x0 0x4>;
+                    };
+
+                    boot-reason@4 {
+                        reg = <0x4 0x4>;
+                    };
+
+                    shutdown-user-flag@8 {
+                        reg = <0x8 0x1>;
+                    };
+
+                    rsoc@10 {
+                        reg = <0xa 0x2>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
index 768390b92682..0e1d43c96fb9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     items:
       - enum:
+          - mediatek,mt6893-scpsys
           - mediatek,mt8167-scpsys
           - mediatek,mt8173-scpsys
           - mediatek,mt8183-scpsys
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
index 8bd1abfc44d9..b613da83dca4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -76,12 +76,6 @@ additionalProperties: false
 
 examples:
   - |
-    ocelot_clock: ocelot-clock {
-          compatible = "fixed-clock";
-          #clock-cells = <0>;
-          clock-frequency = <125000000>;
-      };
-
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
index 59a630025f52..37fbb953ea12 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
@@ -48,29 +48,18 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ec: embedded-controller@43 {
-                    pinctrl-names = "default";
-                    pinctrl-0 = <&pinctrl_ntxec>;
-
-                    compatible = "netronix,ntxec";
-                    reg = <0x43>;
-                    system-power-controller;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-                    #pwm-cells = <2>;
-            };
-    };
-
-    backlight {
-            compatible = "pwm-backlight";
-            pwms = <&ec 0 50000>;
-            power-supply = <&backlight_regulator>;
-    };
-
-    backlight_regulator: regulator-dummy {
-            compatible = "regulator-fixed";
-            regulator-name = "backlight";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ec: embedded-controller@43 {
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_ntxec>;
+
+                compatible = "netronix,ntxec";
+                reg = <0x43>;
+                system-power-controller;
+                interrupt-parent = <&gpio4>;
+                interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                #pwm-cells = <2>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 7e7225aadae3..14ae3f00ef7e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -41,6 +41,7 @@ properties:
           - qcom,sm8450-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq5018
           - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq5424
           - qcom,tcsr-ipq6018
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
index 534cf03f36bb..47611c2a982c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
@@ -99,29 +99,29 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          pmic: pmic@30 {
-                  compatible = "rohm,bd9571mwv";
-                  reg = <0x30>;
-                  interrupt-parent = <&gpio2>;
-                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-                  interrupt-controller;
-                  #interrupt-cells = <2>;
-                  gpio-controller;
-                  #gpio-cells = <2>;
-                  rohm,ddr-backup-power = <0xf>;
-                  rohm,rstbmode-pulse;
-
-                  regulators {
-                          dvfs: dvfs {
-                                  regulator-name = "dvfs";
-                                  regulator-min-microvolt = <750000>;
-                                  regulator-max-microvolt = <1030000>;
-                                  regulator-boot-on;
-                                  regulator-always-on;
-                          };
-                  };
-          };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@30 {
+            compatible = "rohm,bd9571mwv";
+            reg = <0x30>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            rohm,ddr-backup-power = <0xf>;
+            rohm,rstbmode-pulse;
+
+            regulators {
+                dvfs: dvfs {
+                    regulator-name = "dvfs";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1030000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
index efee3de0d9ad..0e06570483ae 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
@@ -4,19 +4,21 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD96801 Scalable Power Management Integrated Circuit
+title: ROHM BD96801/BD96805 Scalable Power Management Integrated Circuit
 
 maintainers:
   - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
 
 description:
-  BD96801 is an automotive grade single-chip power management IC.
-  It integrates 4 buck converters and 3 LDOs with safety features like
+  BD96801 and BD96805 are automotive grade, single-chip power management ICs.
+  They both integrate 4 buck converters and 3 LDOs with safety features like
   over-/under voltage and over current detection and a watchdog.
 
 properties:
   compatible:
-    const: rohm,bd96801
+    enum:
+      - rohm,bd96801
+      - rohm,bd96805
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml
new file mode 100644
index 000000000000..6cbea796d12f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96802-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96802 / BD96806 Scalable Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD96802Qxx-C and BD96806 are automotive grade configurable Power Management
+  Integrated Circuits supporting Functional Safety features for application
+  processors, SoCs and FPGAs
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd96802
+      - rohm,bd96806
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+      for fatal IRQs which will cause the PMIC to shut down power outputs.
+      In many systems this will shut down the SoC contolling the PMIC and
+      connecting/handling the errb can be omitted. However, there are cases
+      where the SoC is not powered by the PMIC or has a short time backup
+      energy to handle shutdown of critical hardware. In that case it may be
+      useful to connect the errb and handle errb events.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [intb, errb]
+      - const: errb
+
+  regulators:
+    $ref: ../regulator/rohm,bd96802-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@62 {
+            reg = <0x62>;
+            compatible = "rohm,bd96802";
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intb", "errb";
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-ramp-delay = <1250>;
+                    /* 0.5V min INITIAL - 150 mV tune */
+                    regulator-min-microvolt = <350000>;
+                    /* 3.3V + 150mV tune */
+                    regulator-max-microvolt = <3450000>;
+
+                    /* These can be set only when PMIC is in STBY */
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <230000>;
+                    regulator-uv-error-microvolt = <230000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <3000000>;
+                    regulator-ov-error-microvolt = <18000>;
+                    regulator-uv-error-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <1>;
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index ac5d0c149796..d6b9e2914796 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -20,6 +20,7 @@ description: |
 properties:
   compatible:
     enum:
+      - samsung,s2mpg10-pmic
       - samsung,s2mps11-pmic
       - samsung,s2mps13-pmic
       - samsung,s2mps14-pmic
@@ -58,16 +59,39 @@ properties:
       reset (setting buck voltages to default values).
     type: boolean
 
+  system-power-controller: true
+
   wakeup-source: true
 
 required:
   - compatible
-  - reg
   - regulators
 
 additionalProperties: false
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpg10-pmic
+    then:
+      properties:
+        reg: false
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+      oneOf:
+        - required: [interrupts]
+        - required: [interrupts-extended]
+
+    else:
+      properties:
+        system-power-controller: false
+
+      required:
+        - reg
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index d41308856408..4eabafb8079d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -21,7 +21,12 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32-lptimer
+    oneOf:
+      - items:
+          - const: st,stm32mp25-lptimer
+          - const: st,stm32-lptimer
+      - items:
+          - const: st,stm32-lptimer
 
   reg:
     maxItems: 1
@@ -48,13 +53,21 @@ properties:
     minItems: 1
     maxItems: 2
 
+  power-domains:
+    maxItems: 1
+
   pwm:
     type: object
     additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-pwm-lp
+        oneOf:
+          - items:
+              - const: st,stm32mp25-pwm-lp
+              - const: st,stm32-pwm-lp
+          - items:
+              - const: st,stm32-pwm-lp
 
       "#pwm-cells":
         const: 3
@@ -69,7 +82,12 @@ properties:
 
     properties:
       compatible:
-        const: st,stm32-lptimer-counter
+        oneOf:
+          - items:
+              - const: st,stm32mp25-lptimer-counter
+              - const: st,stm32-lptimer-counter
+          - items:
+              - const: st,stm32-lptimer-counter
 
     required:
       - compatible
@@ -80,7 +98,12 @@ properties:
 
     properties:
       compatible:
-        const: st,stm32-lptimer-timer
+        oneOf:
+          - items:
+              - const: st,stm32mp25-lptimer-timer
+              - const: st,stm32-lptimer-timer
+          - items:
+              - const: st,stm32-lptimer-timer
 
     required:
       - compatible
@@ -92,13 +115,18 @@ patternProperties:
 
     properties:
       compatible:
-        const: st,stm32-lptimer-trigger
+        oneOf:
+          - items:
+              - const: st,stm32mp25-lptimer-trigger
+              - const: st,stm32-lptimer-trigger
+          - items:
+              - const: st,stm32-lptimer-trigger
 
       reg:
         description: Identify trigger hardware block.
         items:
           minimum: 0
-          maximum: 2
+          maximum: 4
 
     required:
       - compatible
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
index c6bbb19c3e3e..27672adeb1fe 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -84,6 +84,7 @@ select:
           - mediatek,mt2701-pctl-a-syscfg
           - mediatek,mt2712-pctl-a-syscfg
           - mediatek,mt6397-pctl-pmic-syscfg
+          - mediatek,mt7988-topmisc
           - mediatek,mt8135-pctl-a-syscfg
           - mediatek,mt8135-pctl-b-syscfg
           - mediatek,mt8173-pctl-a-syscfg
@@ -98,6 +99,8 @@ select:
           - mstar,msc313-pmsleep
           - nuvoton,ma35d1-sys
           - nuvoton,wpcm450-shm
+          - qcom,apq8064-mmss-sfpb
+          - qcom,apq8064-sps-sic
           - rockchip,px30-qos
           - rockchip,rk3036-qos
           - rockchip,rk3066-qos
@@ -187,9 +190,11 @@ properties:
           - mediatek,mt2701-pctl-a-syscfg
           - mediatek,mt2712-pctl-a-syscfg
           - mediatek,mt6397-pctl-pmic-syscfg
+          - mediatek,mt7988-topmisc
           - mediatek,mt8135-pctl-a-syscfg
           - mediatek,mt8135-pctl-b-syscfg
           - mediatek,mt8173-pctl-a-syscfg
+          - mediatek,mt8365-infracfg-nao
           - mediatek,mt8365-syscfg
           - microchip,lan966x-cpu-syscon
           - microchip,mpfs-sysreg-scb
@@ -201,6 +206,8 @@ properties:
           - mstar,msc313-pmsleep
           - nuvoton,ma35d1-sys
           - nuvoton,wpcm450-shm
+          - qcom,apq8064-mmss-sfpb
+          - qcom,apq8064-sps-sic
           - rockchip,px30-qos
           - rockchip,rk3036-qos
           - rockchip,rk3066-qos
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 3f7661bdd202..45f015d63df1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -316,106 +316,106 @@ additionalProperties: false
 
 examples:
   - |
-      i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          pmic@30 {
-              compatible = "x-powers,axp152";
-              reg = <0x30>;
-              interrupts = <0>;
-              interrupt-controller;
-              #interrupt-cells = <1>;
-          };
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@30 {
+            compatible = "x-powers,axp152";
+            reg = <0x30>;
+            interrupts = <0>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+        };
+    };
 
   - |
-      #include <dt-bindings/interrupt-controller/irq.h>
-
-      i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          pmic@34 {
-              compatible = "x-powers,axp209";
-              reg = <0x34>;
-              interrupt-parent = <&nmi_intc>;
-              interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-              interrupt-controller;
-              #interrupt-cells = <1>;
-
-              ac_power_supply: ac-power {
-                  compatible = "x-powers,axp202-ac-power-supply";
-              };
-
-              axp_adc: adc {
-                  compatible = "x-powers,axp209-adc";
-                  #io-channel-cells = <1>;
-              };
-
-              axp_gpio: gpio {
-                  compatible = "x-powers,axp209-gpio";
-                  gpio-controller;
-                  #gpio-cells = <2>;
-
-                  gpio0-adc-pin {
-                      pins = "GPIO0";
-                      function = "adc";
-                  };
-              };
-
-              battery_power_supply: battery-power {
-                  compatible = "x-powers,axp209-battery-power-supply";
-              };
-
-              regulators {
-                  /* Default work frequency for buck regulators */
-                  x-powers,dcdc-freq = <1500>;
-
-                  reg_dcdc2: dcdc2 {
-                      regulator-always-on;
-                      regulator-min-microvolt = <1000000>;
-                      regulator-max-microvolt = <1450000>;
-                      regulator-name = "vdd-cpu";
-                  };
-
-                  reg_dcdc3: dcdc3 {
-                      regulator-always-on;
-                      regulator-min-microvolt = <1000000>;
-                      regulator-max-microvolt = <1400000>;
-                      regulator-name = "vdd-int-dll";
-                  };
-
-                  reg_ldo1: ldo1 {
-                      /* LDO1 is a fixed output regulator */
-                      regulator-always-on;
-                      regulator-min-microvolt = <1300000>;
-                      regulator-max-microvolt = <1300000>;
-                      regulator-name = "vdd-rtc";
-                  };
-
-                  reg_ldo2: ldo2 {
-                      regulator-always-on;
-                      regulator-min-microvolt = <3000000>;
-                      regulator-max-microvolt = <3000000>;
-                      regulator-name = "avcc";
-                  };
-
-                  reg_ldo3: ldo3 {
-                      regulator-name = "ldo3";
-                  };
-
-                  reg_ldo4: ldo4 {
-                      regulator-name = "ldo4";
-                  };
-
-                  reg_ldo5: ldo5 {
-                      regulator-name = "ldo5";
-                  };
-              };
-
-              usb_power_supply: usb-power {
-                  compatible = "x-powers,axp202-usb-power-supply";
-              };
-          };
-      };
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@34 {
+            compatible = "x-powers,axp209";
+            reg = <0x34>;
+            interrupt-parent = <&nmi_intc>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            ac_power_supply: ac-power {
+                compatible = "x-powers,axp202-ac-power-supply";
+            };
+
+            axp_adc: adc {
+                compatible = "x-powers,axp209-adc";
+                #io-channel-cells = <1>;
+            };
+
+            axp_gpio: gpio {
+                compatible = "x-powers,axp209-gpio";
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                gpio0-adc-pin {
+                    pins = "GPIO0";
+                    function = "adc";
+                };
+            };
+
+            battery_power_supply: battery-power {
+                compatible = "x-powers,axp209-battery-power-supply";
+            };
+
+            regulators {
+                /* Default work frequency for buck regulators */
+                x-powers,dcdc-freq = <1500>;
+
+                reg_dcdc2: dcdc2 {
+                    regulator-always-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1450000>;
+                    regulator-name = "vdd-cpu";
+                };
+
+                reg_dcdc3: dcdc3 {
+                    regulator-always-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-name = "vdd-int-dll";
+                };
+
+                reg_ldo1: ldo1 {
+                    /* LDO1 is a fixed output regulator */
+                    regulator-always-on;
+                    regulator-min-microvolt = <1300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-name = "vdd-rtc";
+                };
+
+                reg_ldo2: ldo2 {
+                    regulator-always-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-name = "avcc";
+                };
+
+                reg_ldo3: ldo3 {
+                    regulator-name = "ldo3";
+                };
+
+                reg_ldo4: ldo4 {
+                    regulator-name = "ldo4";
+                };
+
+                reg_ldo5: ldo5 {
+                    regulator-name = "ldo5";
+                };
+            };
+
+            usb_power_supply: usb-power {
+                compatible = "x-powers,axp202-usb-power-supply";
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mips/cpus.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
index a85137add668..471373ad0cfb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mips/cpus.yaml
@@ -50,6 +50,7 @@ properties:
   device_type: true
 
 allOf:
+  - $ref: /schemas/opp/opp-v1.yaml#
   - if:
       properties:
         compatible:
@@ -68,7 +69,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mips/econet.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mips/econet.yaml
new file mode 100644
index 000000000000..d8181b58c781
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mips/econet.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/econet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EcoNet MIPS SoCs
+
+maintainers:
+  - Caleb James DeLisle <cjd@cjdns.fr>
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Boards with EcoNet EN751221 family SoC
+        items:
+          - enum:
+              - smartfiber,xp8421-b
+          - const: econet,en751221
+
+additionalProperties: true
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/misc/ti,fpc202.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/misc/ti,fpc202.yaml
new file mode 100644
index 000000000000..a8cb10f2d0df
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/misc/ti,fpc202.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,fpc202.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI FPC202 dual port controller with expanded IOs
+
+maintainers:
+  - Romain Gantois <romain.gantois@bootlin.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-atr.yaml#
+
+properties:
+  compatible:
+    const: ti,fpc202
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  enable-gpios:
+    description:
+      Specifier for the GPIO connected to the EN pin.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^i2c@[0-1]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    description: Downstream device ports 0 and 1
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          Downstream port ID
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-atr@f {
+            compatible = "ti,fpc202";
+            reg = <0xf>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            i2c@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+            };
+
+            i2c@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 9075add020bf..8e79de97b242 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -38,6 +38,15 @@ allOf:
             - items:
                 - const: clk_out_sd1
                 - const: clk_in_sd1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sdhci
+    then:
+      properties:
+        interrupts:
+          minItems: 2
 
 properties:
   compatible:
@@ -45,6 +54,10 @@ properties:
       - const: arasan,sdhci-8.9a                # generic Arasan SDHCI 8.9a PHY
       - const: arasan,sdhci-4.9a                # generic Arasan SDHCI 4.9a PHY
       - const: arasan,sdhci-5.1                 # generic Arasan SDHCI 5.1 PHY
+      - items:
+          - const: renesas,r9a06g032-sdhci      # Renesas RZ/N1D SoC
+          - const: renesas,rzn1-sdhci           # Renesas RZ/N1 family
+          - const: arasan,sdhci-8.9a
       - items:
           - const: rockchip,rk3399-sdhci-5.1    # rk3399 eMMC PHY
           - const: arasan,sdhci-5.1
@@ -109,7 +122,14 @@ properties:
       - const: gate
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: int
+      - const: wakeup
 
   phys:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml
index b86ffb53b18b..62087cf920df 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/fsl,esdhc.yaml
@@ -24,6 +24,7 @@ properties:
           - fsl,t1040-esdhc
           - fsl,t4240-esdhc
           - fsl,ls1012a-esdhc
+          - fsl,ls1021a-esdhc
           - fsl,ls1028a-esdhc
           - fsl,ls1088a-esdhc
           - fsl,ls1043a-esdhc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
index 3f48d8292d5b..ee2ddef36369 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -52,9 +52,14 @@ properties:
       - const: core
       - const: axi
 
+  dma-coherent: true
+
   interrupts:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
   marvell,pad-type:
     $ref: /schemas/types.yaml#/definitions/string
     enum:
@@ -142,7 +147,7 @@ properties:
       This property provides the re-tuning counter.
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
   - if:
       properties:
         compatible:
@@ -164,26 +169,6 @@ allOf:
 
         marvell,pad-type: false
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - marvell,armada-cp110-sdhci
-              - marvell,armada-ap807-sdhci
-              - marvell,armada-ap806-sdhci
-
-    then:
-      properties:
-        clocks:
-          minItems: 2
-
-        clock-names:
-          items:
-            - const: core
-            - const: axi
-
-
 required:
   - compatible
   - reg
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
deleted file mode 100644
index f064528effed..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Microchip PIC32 SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pic32 driver.
-
-Required properties:
-- compatible: Should be "microchip,pic32mzda-sdhci"
-- interrupts: Should contain interrupt
-- clock-names: Should be "base_clk", "sys_clk".
-               See: Documentation/devicetree/bindings/resource-names.txt
-- clocks: Phandle to the clock.
-          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- pinctrl-names: A pinctrl state names "default" must be defined.
-- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
-             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-
-	sdhci@1f8ec000 {
-		compatible = "microchip,pic32mzda-sdhci";
-		reg = <0x1f8ec000 0x100>;
-		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
-		clock-names = "base_clk", "sys_clk";
-		bus-width = <4>;
-		cap-sd-highspeed;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sdhc1>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.yaml
new file mode 100644
index 000000000000..ca0ca7df9ee9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,sdhci-pic32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 SDHI Controller
+
+description:
+  The Microchip PIC32 family of microcontrollers (MCUs) includes models with
+  Secure Digital Host Controller Interface (SDHCI) controllers, allowing them
+  to interface with Secure Digital (SD) cards. This interface is used for reading,
+  writing, and managing data on SD cards, enabling storage and data transfer
+  capabilities in embedded systems.
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    const: microchip,pic32mzda-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: base_clk
+      - const: sys_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-names
+  - pinctrl-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/microchip,pic32-clock.h>
+    mmc@1f8ec000 {
+        compatible = "microchip,pic32mzda-sdhci";
+        reg = <0x1f8ec000 0x100>;
+        interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
+        clock-names = "base_clk", "sys_clk";
+        bus-width = <4>;
+        cap-sd-highspeed;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sdhc1>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 0debccbd6519..6dd26ad31491 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -32,6 +32,7 @@ properties:
           - const: mediatek,mt2701-mmc
       - items:
           - enum:
+              - mediatek,mt6893-mmc
               - mediatek,mt8186-mmc
               - mediatek,mt8188-mmc
               - mediatek,mt8192-mmc
@@ -299,6 +300,7 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt6893-mmc
             - mediatek,mt8186-mmc
             - mediatek,mt8188-mmc
             - mediatek,mt8195-mmc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 773baa6c2656..7563623876fc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -69,7 +69,9 @@ properties:
               - renesas,sdhi-r9a09g011 # RZ/V2M
           - const: renesas,rzg2l-sdhi
       - items:
-          - const: renesas,sdhi-r9a09g047 # RZ/G3E
+          - enum:
+              - renesas,sdhi-r9a09g047 # RZ/G3E
+              - renesas,sdhi-r9a09g056 # RZ/V2N
           - const: renesas,sdhi-r9a09g057 # RZ/V2H(P)
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index eed9063e9bb3..2b2cbce2458b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -60,6 +60,7 @@ properties:
               - qcom,sm6125-sdhci
               - qcom,sm6350-sdhci
               - qcom,sm6375-sdhci
+              - qcom,sm7150-sdhci
               - qcom,sm8150-sdhci
               - qcom,sm8250-sdhci
               - qcom,sm8350-sdhci
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/sdhci.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/sdhci.txt
deleted file mode 100644
index 0e9923a64024..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/sdhci.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-The properties specific for SD host controllers. For properties shared by MMC
-host controllers refer to the mmc[1] bindings.
-
-  [1] Documentation/devicetree/bindings/mmc/mmc.txt
-
-Optional properties:
-- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
-  property corresponds to the bits in the sdhci capability register. If the bit
-  is on in the mask then the bit is incorrect in the register and should be
-  turned off, before applying sdhci-caps.
-- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit
-  property corresponds to the bits in the sdhci capability register. If the
-  bit is on in the property then the bit should be turned on.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index e6e604072d3c..f882219a0a26 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -19,6 +19,9 @@ properties:
               - rockchip,rk3562-dwcmshc
               - rockchip,rk3576-dwcmshc
           - const: rockchip,rk3588-dwcmshc
+      - items:
+          - const: sophgo,sg2044-dwcmshc
+          - const: sophgo,sg2042-dwcmshc
       - enum:
           - rockchip,rk3568-dwcmshc
           - rockchip,rk3588-dwcmshc
@@ -117,10 +120,6 @@ allOf:
       required:
         - power-domains
 
-    else:
-      properties:
-        power-domains: false
-
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
new file mode 100644
index 000000000000..13d9382058fb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/spacemit,sdhci.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/spacemit,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT SDHCI Controller
+
+maintainers:
+  - Yixun Lan <dlan@gentoo.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core clock, used by internal controller
+      - description: io clock, output for SD, SDIO, eMMC device
+
+  clock-names:
+    items:
+      - const: core
+      - const: io
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d4281000 {
+      compatible = "spacemit,k1-sdhci";
+      reg = <0xd4281000 0x200>;
+      interrupts = <101>;
+      interrupt-parent = <&plic>;
+      clocks = <&clk_apmu 10>, <&clk_apmu 13>;
+      clock-names = "core", "io";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
deleted file mode 100644
index d7fb6abb3eb8..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Wondermedia WM8505/WM8650 SD/MMC Host Controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the wmt-sdmmc driver.
-
-Required properties:
-- compatible: Should be "wm,wm8505-sdhc".
-- interrupts: Two interrupts are required - regular irq and dma irq.
-
-Optional properties:
-- sdon-inverted: SD_ON bit is inverted on the controller
-
-Examples:
-
-sdhc@d800a000 {
-	compatible = "wm,wm8505-sdhc";
-	reg = <0xd800a000 0x1000>;
-	interrupts = <20 21>;
-	clocks = <&sdhc>;
-	bus-width = <4>;
-	sdon-inverted;
-};
-
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mmc/wm,wm8505-sdhc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/wm,wm8505-sdhc.yaml
new file mode 100644
index 000000000000..5b55174e9088
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mmc/wm,wm8505-sdhc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/wm,wm8505-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WonderMedia SoC SDHCI Controller
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: wm,wm8505-sdhc
+      - items:
+          - const: wm,wm8650-sdhc
+          - const: wm,wm8505-sdhc
+      - items:
+          - const: wm,wm8750-sdhc
+          - const: wm,wm8505-sdhc
+      - items:
+          - const: wm,wm8850-sdhc
+          - const: wm,wm8505-sdhc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SDMMC controller interrupt
+      - description: SDMMC controller DMA interrupt
+
+  sdon-inverted:
+    type: boolean
+    description: All chips before (not including) WM8505 rev. A2 treated their
+      "clock stop" bit (register offset 0x08 a.k.a. SDMMC_BUSMODE, bit 0x10)
+      as "set 1 to disable SD clock", while all the later versions treated it
+      as "set 0 to disable SD clock". Set this property for later versions of
+      wm,wm8505-sdhc. On wm,wm8650-sdhc and later this property is implied and
+      does not need to be set explicitly
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d800a000 {
+        compatible = "wm,wm8505-sdhc";
+        reg = <0xd800a000 0x1000>;
+        interrupts = <20>, <21>;
+        clocks = <&sdhc>;
+        bus-width = <4>;
+        sdon-inverted;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/fsl,vf610-nfc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/fsl,vf610-nfc.yaml
new file mode 100644
index 000000000000..480a5c87859d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/fsl,vf610-nfc.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/fsl,vf610-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale's NAND flash controller (NFC)
+
+description:
+  This variant of the Freescale NAND flash controller (NFC) can be found on
+  Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,vf610-nfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nfc
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+
+    properties:
+      compatible:
+        const: fsl,vf610-nfc-nandcs
+
+      reg:
+        const: 0
+
+      nand-ecc-strength:
+        enum: [24, 32]
+
+      nand-ecc-step-size:
+        const: 2048
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: nand-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    nand-controller@400e0000 {
+        compatible = "fsl,vf610-nfc";
+        reg = <0x400e0000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_NFC>;
+        clock-names = "nfc";
+        assigned-clocks = <&clks VF610_CLK_NFC>;
+        assigned-clock-rates = <33000000>;
+
+        nand@0 {
+            compatible = "fsl,vf610-nfc-nandcs";
+            reg = <0>;
+            nand-bus-width = <8>;
+            nand-ecc-mode = "hw";
+            nand-ecc-strength = <32>;
+            nand-ecc-step-size = <2048>;
+            nand-on-flash-bbt;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
new file mode 100644
index 000000000000..a09e92e416c4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/loongson,ls1b-nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 NAND Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  The Loongson-1 NAND controller abstracts all supported operations,
+  meaning it does not support low-level access to raw NAND flash chips.
+  Moreover, the controller is paired with the DMA engine to perform
+  READ and PROGRAM functions.
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls1b-nand-controller
+          - loongson,ls1c-nand-controller
+      - items:
+          - enum:
+              - loongson,ls1a-nand-controller
+          - const: loongson,ls1b-nand-controller
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nand
+      - const: nand-dma
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rxtx
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@1fe78000 {
+        compatible = "loongson,ls1b-nand-controller";
+        reg = <0x1fe78000 0x24>, <0x1fe78040 0x4>;
+        reg-names = "nand", "nand-dma";
+        dmas = <&dma 0>;
+        dma-names = "rxtx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "ls1x-nand";
+            nand-use-soft-ecc-engine;
+            nand-ecc-algo = "hamming";
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 35b4206ea918..5511389960f0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,ipq806x-nand
-      - qcom,ipq4019-nand
-      - qcom,ipq6018-nand
-      - qcom,ipq8074-nand
-      - qcom,sdx55-nand
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sdx75-nand
+          - const: qcom,sdx55-nand
+      - items:
+          - enum:
+              - qcom,ipq806x-nand
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
 
   reg:
     maxItems: 1
@@ -95,6 +101,18 @@ allOf:
           items:
             - const: rxtx
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx75-nand
+
+    then:
+      properties:
+        iommus:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/vf610-nfc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
deleted file mode 100644
index 7db5e6e609df..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Freescale's NAND flash controller (NFC)
-
-This variant of the Freescale NAND flash controller (NFC) can be found on
-Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
-
-Required properties:
-- compatible: Should be set to "fsl,vf610-nfc".
-- reg: address range of the NFC.
-- interrupts: interrupt of the NFC.
-- #address-cells: shall be set to 1. Encode the nand CS.
-- #size-cells : shall be set to 0.
-- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
-- assigned-clock-rates: The NAND bus timing is derived from this clock
-    rate and should not exceed maximum timing for any NAND memory chip
-    in a board stuffing. Typical NAND memory timings derived from this
-    clock are found in the SoC hardware reference manual. Furthermore,
-    there might be restrictions on maximum rates when using hardware ECC.
-
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-  representing partitions.
-
-Required children nodes:
-Children nodes represent the available nand chips. Currently the driver can
-only handle one NAND chip.
-
-Required properties:
-- compatible: Should be set to "fsl,vf610-nfc-cs".
-- nand-bus-width: see nand-controller.yaml
-- nand-ecc-mode: see nand-controller.yaml
-
-Required properties for hardware ECC:
-- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand-controller.yaml)
-- nand-ecc-step-size: step size equals page size, currently only 2k pages are
-    supported
-- nand-on-flash-bbt: see nand-controller.yaml
-
-Example:
-
-	nfc: nand@400e0000 {
-		compatible = "fsl,vf610-nfc";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x400e0000 0x4000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks VF610_CLK_NFC>;
-		clock-names = "nfc";
-		assigned-clocks = <&clks VF610_CLK_NFC>;
-		assigned-clock-rates = <33000000>;
-
-		nand@0 {
-			compatible = "fsl,vf610-nfc-nandcs";
-			reg = <0>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <32>;
-			nand-ecc-step-size = <2048>;
-			nand-on-flash-bbt;
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/mux/gpio-mux.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/mux/gpio-mux.yaml
index b597c1f2c577..ef7e33ec85d4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/mux/gpio-mux.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -25,6 +25,10 @@ properties:
     description:
       List of gpios used to control the multiplexer, least significant bit first.
 
+  mux-supply:
+    description:
+      Regulator to power on the multiplexer.
+
   '#mux-control-cells':
     enum: [ 0, 1 ]
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml
new file mode 100644
index 000000000000..0fb0521dcabc
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/aeonsemi,as21xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aeonsemi AS21XXX Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  Aeonsemi AS21xxx Ethernet PHYs requires a firmware to be loaded to actually
+  work. The same firmware is compatible with various PHYs of the same family.
+
+  A PHY with not firmware loaded will be exposed on the MDIO bus with ID
+  0x7500 0x7500 or 0x7500 0x9410 on C45 registers.
+
+  This can be done and is implemented by OEM in 2 different way:
+    - Attached SPI flash directly to the PHY with the firmware. The PHY
+      will self load the firmware in the presence of this configuration.
+    - Manually provided firmware loaded from a file in the filesystem.
+
+  Each PHY can support up to 5 LEDs.
+
+  AS2xxx PHY Name logic:
+
+  AS21x1xxB1
+      ^ ^^
+      | |J: Supports SyncE/PTP
+      | |P: No SyncE/PTP support
+      | 1: Supports 2nd Serdes
+      | 2: Not 2nd Serdes support
+      0: 10G, 5G, 2.5G
+      5: 5G, 2.5G
+      2: 2.5G
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-id7500.9410
+          - ethernet-phy-id7500.9402
+          - ethernet-phy-id7500.9412
+          - ethernet-phy-id7500.9422
+          - ethernet-phy-id7500.9432
+          - ethernet-phy-id7500.9442
+          - ethernet-phy-id7500.9452
+          - ethernet-phy-id7500.9462
+          - ethernet-phy-id7500.9472
+          - ethernet-phy-id7500.9482
+          - ethernet-phy-id7500.9492
+  required:
+    - compatible
+
+properties:
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    description: specify the name of PHY firmware to load
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: ethernet-phy-id7500.9410
+then:
+  required:
+    - firmware-name
+else:
+  properties:
+    firmware-name: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@1f {
+            compatible = "ethernet-phy-id7500.9410",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <31>;
+            firmware-name = "/*(DEBLOBBED)*/";
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_LAN;
+                    function-enumerator = <0>;
+                    default-state = "keep";
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_LAN;
+                    function-enumerator = <1>;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
index 0fdd11265417..6d22131ac2f9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
@@ -57,6 +57,16 @@ properties:
       - const: hsi-mac
       - const: xfp-mac
 
+  memory-region:
+    items:
+      - description: QDMA0 buffer memory
+      - description: QDMA1 buffer memory
+
+  memory-region-names:
+    items:
+      - const: qdma0-buf
+      - const: qdma1-buf
+
   "#address-cells":
     const: 1
 
@@ -140,6 +150,9 @@ examples:
                      <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 
+        memory-region = <&qdma0_buf>, <&qdma1_buf>;
+        memory-region-names = "qdma0-buf", "qdma1-buf";
+
         airoha,npu = <&npu>;
 
         #address-cells = <1>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 7fe0352dff0f..19934d5c24e5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -23,6 +23,7 @@ properties:
               - allwinner,sun20i-d1-emac
               - allwinner,sun50i-h6-emac
               - allwinner,sun50i-h616-emac0
+              - allwinner,sun55i-a523-gmac0
           - const: allwinner,sun50i-a64-emac
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 31504499c806..bbb1d9981bf6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -48,6 +48,18 @@ properties:
     description:
       The GPIO number of the NXP chipset used for BT_WAKE_IN.
 
+  interrupts:
+    maxItems: 1
+    description:
+      Host wakeup by falling edge interrupt on this pin which is
+      connected to BT_WAKE_OUT pin of the NXP chipset.
+
+  interrupt-names:
+    items:
+      - const: wakeup
+
+  wakeup-source: true
+
   nxp,wakeout-pin:
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
@@ -61,6 +73,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     serial {
         bluetooth {
             compatible = "nxp,88w8987-bt";
@@ -70,5 +83,9 @@ examples:
             nxp,wakein-pin = /bits/ 8 <18>;
             nxp,wakeout-pin = /bits/ 8 <19>;
             local-bd-address = [66 55 44 33 22 11];
+            interrupt-parent = <&gpio>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "wakeup";
+            wakeup-source;
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
index 660e2ca42daf..a3db6d594c8c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom ASP 2.0 Ethernet controller
+title: Broadcom ASP Ethernet controller
 
 maintainers:
   - Justin Chen <justin.chen@broadcom.com>
@@ -15,6 +15,10 @@ description: Broadcom Ethernet controller first introduced with 72165
 properties:
   compatible:
     oneOf:
+      - items:
+          - enum:
+              - brcm,bcm74110-asp
+          - const: brcm,asp-v3.0
       - items:
           - enum:
               - brcm,bcm74165b0-asp
@@ -23,10 +27,6 @@ properties:
           - enum:
               - brcm,bcm74165-asp
           - const: brcm,asp-v2.1
-      - items:
-          - enum:
-              - brcm,bcm72165-asp
-          - const: brcm,asp-v2.0
 
   "#address-cells":
     const: 1
@@ -39,11 +39,9 @@ properties:
   ranges: true
 
   interrupts:
-    minItems: 1
     items:
       - description: RX/TX interrupt
-      - description: Port 0 Wake-on-LAN
-      - description: Port 1 Wake-on-LAN
+      - description: Wake-on-LAN interrupt
 
   clocks:
     maxItems: 1
@@ -106,16 +104,17 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     ethernet@9c00000 {
-        compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0";
+        compatible = "brcm,bcm74165-asp", "brcm,asp-v2.1";
         reg = <0x9c00000 0x1fff14>;
-        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts-extended = <&intc GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                              <&aon_pm_l2_intc 14>;
         ranges = <0x0 0x9c00000 0x1fff14>;
         clocks = <&scmi 14>;
         #address-cells = <1>;
         #size-cells = <1>;
 
         mdio@c614 {
-            compatible = "brcm,asp-v2.0-mdio";
+            compatible = "brcm,asp-v2.1-mdio";
             reg = <0xc614 0x8>;
             reg-names = "mdio";
             #address-cells = <1>;
@@ -127,7 +126,7 @@ examples:
        };
 
         mdio@ce14 {
-            compatible = "brcm,asp-v2.0-mdio";
+            compatible = "brcm,asp-v2.1-mdio";
             reg = <0xce14 0x8>;
             reg-names = "mdio";
             #address-cells = <1>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
index 63bee5b542f5..43516dd357b8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -22,9 +22,9 @@ properties:
       - brcm,genet-mdio-v3
       - brcm,genet-mdio-v4
       - brcm,genet-mdio-v5
-      - brcm,asp-v2.0-mdio
       - brcm,asp-v2.1-mdio
       - brcm,asp-v2.2-mdio
+      - brcm,asp-v3.0-mdio
       - brcm,unimac-mdio
       - brcm,bcm6846-mdio
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
index 144a3785132c..ec0c2168e4b9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -16,9 +16,7 @@ properties:
           - nxp,sja1000
           - technologic,sja1000
       - items:
-          - enum:
-              - renesas,r9a06g032-sja1000 # RZ/N1D
-              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,r9a06g032-sja1000 # RZ/N1D
           - const: renesas,rzn1-sja1000 # RZ/N1
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index f6884f6e59e7..f4ac21c68427 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -42,19 +42,80 @@ properties:
               - renesas,r9a07g054-canfd    # RZ/V2L
           - const: renesas,rzg2l-canfd     # RZ/G2L family
 
+      - const: renesas,r9a09g047-canfd     # RZ/G3E
+
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    oneOf:
+      - items:
+          - description: Channel interrupt
+          - description: Global interrupt
+      - items:
+          - description: CAN global error interrupt
+          - description: CAN receive FIFO interrupt
+          - description: CAN0 error interrupt
+          - description: CAN0 transmit interrupt
+          - description: CAN0 transmit/receive FIFO receive completion interrupt
+          - description: CAN1 error interrupt
+          - description: CAN1 transmit interrupt
+          - description: CAN1 transmit/receive FIFO receive completion interrupt
+          - description: CAN2 error interrupt
+          - description: CAN2 transmit interrupt
+          - description: CAN2 transmit/receive FIFO receive completion interrupt
+          - description: CAN3 error interrupt
+          - description: CAN3 transmit interrupt
+          - description: CAN3 transmit/receive FIFO receive completion interrupt
+          - description: CAN4 error interrupt
+          - description: CAN4 transmit interrupt
+          - description: CAN4 transmit/receive FIFO receive completion interrupt
+          - description: CAN5 error interrupt
+          - description: CAN5 transmit interrupt
+          - description: CAN5 transmit/receive FIFO receive completion interrupt
+        minItems: 8
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: ch_int
+          - const: g_int
+      - items:
+          - const: g_err
+          - const: g_recc
+          - const: ch0_err
+          - const: ch0_rec
+          - const: ch0_trx
+          - const: ch1_err
+          - const: ch1_rec
+          - const: ch1_trx
+          - const: ch2_err
+          - const: ch2_rec
+          - const: ch2_trx
+          - const: ch3_err
+          - const: ch3_rec
+          - const: ch3_trx
+          - const: ch4_err
+          - const: ch4_rec
+          - const: ch4_trx
+          - const: ch5_err
+          - const: ch5_rec
+          - const: ch5_trx
+        minItems: 8
 
   clocks:
     maxItems: 3
 
   clock-names:
-    items:
-      - const: fck
-      - const: canfd
-      - const: can_clk
+    oneOf:
+      - items:
+          - const: fck
+          - const: canfd
+          - const: can_clk
+      - items:
+          - const: fck
+          - const: ram_clk
+          - const: can_clk
 
   power-domains:
     maxItems: 1
@@ -117,52 +178,77 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: CAN global error interrupt
-            - description: CAN receive FIFO interrupt
-            - description: CAN0 error interrupt
-            - description: CAN0 transmit interrupt
-            - description: CAN0 transmit/receive FIFO receive completion interrupt
-            - description: CAN1 error interrupt
-            - description: CAN1 transmit interrupt
-            - description: CAN1 transmit/receive FIFO receive completion interrupt
+          maxItems: 8
 
         interrupt-names:
-          items:
-            - const: g_err
-            - const: g_recc
-            - const: ch0_err
-            - const: ch0_rec
-            - const: ch0_trx
-            - const: ch1_err
-            - const: ch1_rec
-            - const: ch1_trx
+          maxItems: 8
 
         resets:
+          minItems: 2
           maxItems: 2
 
         reset-names:
-          items:
-            - const: rstp_n
-            - const: rstc_n
+          minItems: 2
+          maxItems: 2
 
       required:
         - reset-names
-    else:
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen3-canfd
+              - renesas,rcar-gen4-canfd
+    then:
       properties:
         interrupts:
-          items:
-            - description: Channel interrupt
-            - description: Global interrupt
+          minItems: 2
+          maxItems: 2
 
         interrupt-names:
-          items:
-            - const: ch_int
-            - const: g_int
+          minItems: 2
+          maxItems: 2
 
         resets:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-canfd
+    then:
+      properties:
+        interrupts:
+          minItems: 20
+
+        interrupt-names:
+          minItems: 20
+
+        resets:
+          minItems: 2
+          maxItems: 2
+
+        reset-names:
+          minItems: 2
+          maxItems: 2
+
+      required:
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen3-canfd
+              - renesas,rzg2l-canfd
+    then:
+      patternProperties:
+        "^channel[2-7]$": false
+
   - if:
       properties:
         compatible:
@@ -171,16 +257,15 @@ allOf:
     then:
       patternProperties:
         "^channel[4-7]$": false
-    else:
-      if:
-        not:
-          properties:
-            compatible:
-              contains:
-                const: renesas,rcar-gen4-canfd
-      then:
-        patternProperties:
-          "^channel[2-7]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-canfd
+    then:
+      patternProperties:
+        "^channel[6-7]$": false
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index ea979bcae1d6..51205f9f2985 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -96,6 +96,10 @@ properties:
           Built-in switch of the Airoha EN7581 SoC
         const: airoha,en7581-switch
 
+      - description:
+          Built-in switch of the Airoha AN7583 SoC
+        const: airoha,an7583-switch
+
   reg:
     maxItems: 1
 
@@ -291,6 +295,7 @@ allOf:
           enum:
             - mediatek,mt7988-switch
             - airoha,en7581-switch
+            - airoha,an7583-switch
     then:
       $ref: "#/$defs/mt7530-dsa-port"
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index a2d4c626f659..7cbf11bbe99c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -16,30 +16,6 @@ properties:
   label:
     description: Human readable label on a port of a box.
 
-  local-mac-address:
-    description:
-      Specifies the MAC address that was assigned to the network device.
-    $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 6
-    maxItems: 6
-
-  mac-address:
-    description:
-      Specifies the MAC address that was last used by the boot
-      program; should be used in cases where the MAC address assigned
-      to the device by the boot program is different from the
-      local-mac-address property.
-    $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 6
-    maxItems: 6
-
-  max-frame-size:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Maximum transfer unit (IEEE defined MTU), rather than the
-      maximum frame size (there\'s contradiction in the Devicetree
-      Specification).
-
   max-speed:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -195,7 +171,7 @@ properties:
             description:
               Link speed.
             $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [10, 100, 1000, 2500, 10000]
+            enum: [10, 100, 1000, 2500, 5000, 10000]
 
           full-duplex:
             $ref: /schemas/types.yaml#/definitions/flag
@@ -260,6 +236,7 @@ dependencies:
   pcs-handle-names: [pcs-handle]
 
 allOf:
+  - $ref: /schemas/net/network-class.yaml#
   - if:
       properties:
         phy-mode:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 824bbe4333b7..71e2cd32580f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -238,6 +238,16 @@ properties:
       peak-to-peak specified in ANSI X3.263. When omitted, the PHYs default
       will be left as is.
 
+  mac-termination-ohms:
+    maximum: 200
+    description:
+      The xMII signals need series termination on the driver side to match both
+      the output driver impedance and the line characteristic impedance, to
+      prevent reflections and EMI problems. Select a resistance value which is
+      supported by the builtin resistors of the PHY, otherwise the resistors may
+      have to be placed on board. When omitted, the PHYs default will be left as
+      is.
+
   leds:
     type: object
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/network-class.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/network-class.yaml
new file mode 100644
index 000000000000..06461fb92eb8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/network-class.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/network-class.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Network Class Common Properties
+
+maintainers:
+  - Devicetree Specification Mailing List <devicetree-spec@vger.kernel.org>
+
+properties:
+  address-bits:
+    description:
+      Specifies number of address bits required to address the device
+      described by this node, e.g. size of the MAC address.
+    default: 48
+    const: 48
+
+  local-mac-address:
+    description:
+      Specifies MAC address that was assigned to the network device described by
+      the node containing this property.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
+
+  mac-address:
+    description:
+      Specifies the MAC address that was last used by the boot program. This
+      property should be used in cases where the MAC address assigned to the
+      device by the boot program is different from the
+      local-mac-address property. This property shall be used only if the value
+      differs from local-mac-address property value.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
+
+  max-frame-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum transfer unit (IEEE defined MTU), rather than the
+      maximum frame size (there\'s contradiction in the Devicetree
+      Specification).
+
+additionalProperties: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml
new file mode 100644
index 000000000000..c498a9999289
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,r9a09g057-gbeth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GBETH glue layer for Renesas RZ/V2H(P) (and similar SoCs)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a09g056-gbeth
+          - renesas,r9a09g057-gbeth
+          - renesas,rzv2h-gbeth
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g056-gbeth # RZ/V2N
+          - renesas,r9a09g057-gbeth # RZ/V2H(P)
+      - const: renesas,rzv2h-gbeth
+      - const: snps,dwmac-5.20
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: CSR clock
+      - description: AXI system clock
+      - description: PTP clock
+      - description: TX clock
+      - description: RX clock
+      - description: TX clock phase-shifted by 180 degrees
+      - description: RX clock phase-shifted by 180 degrees
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: tx
+      - const: rx
+      - const: tx-180
+      - const: rx-180
+
+  interrupts:
+    minItems: 11
+
+  interrupt-names:
+    items:
+      - const: macirq
+      - const: eth_wake_irq
+      - const: eth_lpi
+      - const: rx-queue-0
+      - const: rx-queue-1
+      - const: rx-queue-2
+      - const: rx-queue-3
+      - const: tx-queue-0
+      - const: tx-queue-1
+      - const: tx-queue-2
+      - const: tx-queue-3
+
+  resets:
+    items:
+      - description: AXI power-on system reset
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - resets
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@15c30000 {
+        compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", "snps,dwmac-5.20";
+        reg = <0x15c30000 0x10000>;
+        clocks =  <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+                  <&ptp_clock>, <&cpg CPG_MOD 0xb8>,
+                  <&cpg CPG_MOD 0xb9>, <&cpg CPG_MOD 0xba>,
+                  <&cpg CPG_MOD 0xbb>;
+        clock-names = "stmmaceth", "pclk", "ptp_ref",
+                      "tx", "rx", "tx-180", "rx-180";
+        resets = <&cpg 0xb0>;
+        interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+                          "rx-queue-0", "rx-queue-1", "rx-queue-2",
+                          "rx-queue-3", "tx-queue-0", "tx-queue-1",
+                          "tx-queue-2", "tx-queue-3";
+        phy-mode = "rgmii-id";
+        snps,multicast-filter-bins = <256>;
+        snps,perfect-filter-entries = <128>;
+        rx-fifo-depth = <8192>;
+        tx-fifo-depth = <8192>;
+        snps,fixed-burst;
+        snps,force_thresh_dma_mode;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+        snps,txpbl = <32>;
+        snps,rxpbl = <32>;
+        phy-handle = <&phy0>;
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,lpi_en;
+            snps,wr_osr_lmt = <0xf>;
+            snps,rd_osr_lmt = <0xf>;
+            snps,blen = <16 8 4 0 0 0 0>;
+        };
+
+        mtl_rx_setup: rx-queues-config {
+            snps,rx-queues-to-use = <4>;
+            snps,rx-sched-sp;
+
+            queue0 {
+                snps,dcb-algorithm;
+                snps,priority = <0x1>;
+                snps,map-to-dma-channel = <0>;
+            };
+
+            queue1 {
+                snps,dcb-algorithm;
+                snps,priority = <0x2>;
+                snps,map-to-dma-channel = <1>;
+            };
+
+            queue2 {
+                snps,dcb-algorithm;
+                snps,priority = <0x4>;
+                snps,map-to-dma-channel = <2>;
+            };
+
+            queue3 {
+                snps,dcb-algorithm;
+                snps,priority = <0x8>;
+                snps,map-to-dma-channel = <3>;
+            };
+        };
+
+        mtl_tx_setup: tx-queues-config {
+            snps,tx-queues-to-use = <4>;
+
+            queue0 {
+                snps,dcb-algorithm;
+                snps,priority = <0x1>;
+            };
+
+            queue1 {
+                snps,dcb-algorithm;
+                snps,priority = <0x2>;
+            };
+
+            queue2 {
+                snps,dcb-algorithm;
+                snps,priority = <0x4>;
+            };
+
+            queue3 {
+                snps,dcb-algorithm;
+                snps,priority = <0x1>;
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 78b3030dc56d..90b79283e228 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -75,6 +75,7 @@ properties:
         - qcom,sm8150-ethqos
         - renesas,r9a06g032-gmac
         - renesas,rzn1-gmac
+        - renesas,rzv2h-gbeth
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
@@ -114,19 +115,25 @@ properties:
 
   interrupts:
     minItems: 1
-    items:
-      - description: Combined signal for various interrupt events
-      - description: The interrupt to manage the remote wake-up packet detection
-      - description: The interrupt that occurs when Rx exits the LPI state
-      - description: The interrupt that occurs when HW safety error triggered
+    maxItems: 11
 
   interrupt-names:
     minItems: 1
+    maxItems: 11
     items:
-      - const: macirq
-      - enum: [eth_wake_irq, eth_lpi, sfty]
-      - enum: [eth_wake_irq, eth_lpi, sfty]
-      - enum: [eth_wake_irq, eth_lpi, sfty]
+      oneOf:
+        - description: Combined signal for various interrupt events
+          const: macirq
+        - description: The interrupt to manage the remote wake-up packet detection
+          const: eth_wake_irq
+        - description: The interrupt that occurs when Rx exits the LPI state
+          const: eth_lpi
+        - description: The interrupt that occurs when HW safety error triggered
+          const: sfty
+        - description: Per channel receive completion interrupt
+          pattern: '^rx-queue-[0-3]$'
+        - description: Per channel transmit completion interrupt
+          pattern: '^tx-queue-[0-3]$'
 
   clocks:
     minItems: 1
@@ -703,7 +710,7 @@ examples:
             };
         };
 
-        mdio0 {
+        mdio {
             #address-cells = <1>;
             #size-cells = <0>;
             compatible = "snps,dwmac-mdio";
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
index 4dd2dc9c678b..8afbd9ebd73f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml
@@ -80,6 +80,8 @@ examples:
       interrupt-parent = <&intc>;
       interrupts = <296 IRQ_TYPE_LEVEL_HIGH>;
       interrupt-names = "macirq";
+      phy-handle = <&phy0>;
+      phy-mode = "rgmii-id";
       resets = <&rst 30>;
       reset-names = "stmmaceth";
       snps,multicast-filter-bins = <0>;
@@ -91,7 +93,6 @@ examples:
       snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
       snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
       snps,axi-config = <&gmac0_stmmac_axi_setup>;
-      status = "disabled";
 
       gmac0_mtl_rx_setup: rx-queues-config {
         snps,rx-queues-to-use = <8>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index 50c24248df26..28a0bddb9af9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -122,6 +122,9 @@ properties:
       - free-running
       - recovered
 
+  mac-termination-ohms:
+    enum: [43, 44, 46, 48, 50, 53, 55, 58, 61, 65, 69, 73, 78, 84, 91, 99]
+
 required:
   - reg
 
@@ -137,6 +140,7 @@ examples:
         rx-internal-delay-ps = <1>;
         tx-internal-delay-ps = <1>;
         ti,gpio2-clk-out = "xi";
+        mac-termination-ohms = <43>;
       };
     };
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index b11894fbaec4..7b3d948f187d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -143,6 +143,8 @@ properties:
           label:
             description: label associated with this port
 
+          fixed-link: true
+
           ti,mac-only:
             $ref: /schemas/types.yaml#/definitions/flag
             description:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 4158673f723c..8359de7ad272 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -63,7 +63,7 @@ examples:
             compatible = "vertexcom,mse1021";
             reg = <0>;
             interrupt-parent = <&gpio>;
-            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
             spi-cpha;
             spi-cpol;
             spi-max-frequency = <7142857>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml
new file mode 100644
index 000000000000..e663d5a2f014
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/via,vt8500-rhine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA Rhine 10/100 Network Controller
+
+description:
+  VIA's Ethernet controller integrated into VIA VT8500,
+  WonderMedia WM8950 and related SoCs
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: via,vt8500-rhine
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@d8004000 {
+        compatible = "via,vt8500-rhine";
+        reg = <0xd8004000 0x100>;
+        interrupts = <10>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/via-rhine.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/via-rhine.txt
deleted file mode 100644
index 334eca2bf937..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/via-rhine.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* VIA Rhine 10/100 Network Controller
-
-Required properties:
-- compatible : Should be "via,vt8500-rhine" for integrated
-	Rhine controllers found in VIA VT8500, WonderMedia WM8950
-	and similar. These are listed as 1106:3106 rev. 0x84 on the
-	virtual PCI bus under vendor-provided kernels
-- reg : Address and length of the io space
-- interrupts : Should contain the controller interrupt line
-
-Examples:
-
-ethernet@d8004000 {
-	compatible = "via,vt8500-rhine";
-	reg = <0xd8004000 0x100>;
-	interrupts = <10>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index a3607d55ef36..7c8100e59a6c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -16,7 +16,7 @@ description:
   binding.
 
 allOf:
-  - $ref: ieee80211.yaml#
+  - $ref: /schemas/net/wireless/wireless-controller.yaml#
 
 properties:
   compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
index 9e557cb838c7..dc68dd59988f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
@@ -21,6 +21,12 @@ properties:
   reg:
     maxItems: 1
 
+  firmware-name:
+    maxItems: 1
+    description:
+      If present, a board or platform specific string used to lookup
+      usecase-specific firmware files for the device.
+
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml
new file mode 100644
index 000000000000..363a0ecb6ad9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml
@@ -0,0 +1,315 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ipq5332-wifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath12k wireless devices (AHB)
+
+maintainers:
+  - Jeff Johnson <jjohnson@kernel.org>
+
+description:
+  Qualcomm Technologies IEEE 802.11be AHB devices.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-wifi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock used for copy engine
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    items:
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Spawn acknowledge interrupt
+      - description: Stop acknowledge interrupt
+      - description: misc-pulse1 interrupt events
+      - description: misc-latch interrupt events
+      - description: sw exception interrupt events
+      - description: interrupt event for ring CE0
+      - description: interrupt event for ring CE1
+      - description: interrupt event for ring CE2
+      - description: interrupt event for ring CE3
+      - description: interrupt event for ring CE4
+      - description: interrupt event for ring CE5
+      - description: interrupt event for ring CE6
+      - description: interrupt event for ring CE7
+      - description: interrupt event for ring CE8
+      - description: interrupt event for ring CE9
+      - description: interrupt event for ring CE10
+      - description: interrupt event for ring CE11
+      - description: interrupt event for ring host2wbm-desc-feed
+      - description: interrupt event for ring host2reo-re-injection
+      - description: interrupt event for ring host2reo-command
+      - description: interrupt event for ring host2rxdma-monitor-ring1
+      - description: interrupt event for ring reo2ost-exception
+      - description: interrupt event for ring wbm2host-rx-release
+      - description: interrupt event for ring reo2host-status
+      - description: interrupt event for ring reo2host-destination-ring4
+      - description: interrupt event for ring reo2host-destination-ring3
+      - description: interrupt event for ring reo2host-destination-ring2
+      - description: interrupt event for ring reo2host-destination-ring1
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+      - description: interrupt event for ring host2tcl-input-ring4
+      - description: interrupt event for ring host2tcl-input-ring3
+      - description: interrupt event for ring host2tcl-input-ring2
+      - description: interrupt event for ring host2tcl-input-ring1
+      - description: interrupt event for ring wbm2host-tx-completions-ring4
+      - description: interrupt event for ring wbm2host-tx-completions-ring3
+      - description: interrupt event for ring wbm2host-tx-completions-ring2
+      - description: interrupt event for ring wbm2host-tx-completions-ring1
+      - description: interrupt event for ring host2tx-monitor-ring1
+      - description: interrupt event for ring txmon2host-monitor-destination-mac3
+      - description: interrupt event for ring txmon2host-monitor-destination-mac2
+      - description: interrupt event for ring txmon2host-monitor-destination-mac1
+      - description: interrupt event for umac-reset
+
+  interrupt-names:
+    items:
+      - const: fatal
+      - const: ready
+      - const: spawn
+      - const: stop-ack
+      - const: misc-pulse1
+      - const: misc-latch
+      - const: sw-exception
+      - const: ce0
+      - const: ce1
+      - const: ce2
+      - const: ce3
+      - const: ce4
+      - const: ce5
+      - const: ce6
+      - const: ce7
+      - const: ce8
+      - const: ce9
+      - const: ce10
+      - const: ce11
+      - const: host2wbm-desc-feed
+      - const: host2reo-re-injection
+      - const: host2reo-command
+      - const: host2rxdma-monitor-ring1
+      - const: reo2ost-exception
+      - const: wbm2host-rx-release
+      - const: reo2host-status
+      - const: reo2host-destination-ring4
+      - const: reo2host-destination-ring3
+      - const: reo2host-destination-ring2
+      - const: reo2host-destination-ring1
+      - const: rxdma2host-monitor-destination-mac3
+      - const: rxdma2host-monitor-destination-mac2
+      - const: rxdma2host-monitor-destination-mac1
+      - const: host2rxdma-host-buf-ring-mac3
+      - const: host2rxdma-host-buf-ring-mac2
+      - const: host2rxdma-host-buf-ring-mac1
+      - const: host2tcl-input-ring4
+      - const: host2tcl-input-ring3
+      - const: host2tcl-input-ring2
+      - const: host2tcl-input-ring1
+      - const: wbm2host-tx-completions-ring4
+      - const: wbm2host-tx-completions-ring3
+      - const: wbm2host-tx-completions-ring2
+      - const: wbm2host-tx-completions-ring1
+      - const: host2tx-monitor-ring1
+      - const: txmon2host-monitor-destination-mac3
+      - const: txmon2host-monitor-destination-mac2
+      - const: txmon2host-monitor-destination-mac1
+      - const: umac-reset
+
+  memory-region:
+    description:
+      Memory regions used by the ath12k firmware.
+    items:
+      - description: Q6 memory region
+      - description: m3 dump memory region
+      - description: Q6 caldata memory region
+      - description: Multi Link Operation (MLO) Global memory region
+
+  memory-region-names:
+    items:
+      - const: q6-region
+      - const: m3-dump
+      - const: q6-caldb
+      - const: mlo-global-mem
+
+  qcom,calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String to uniquely identify variant of the calibration data for designs
+      with colliding bus and device ids
+
+  qcom,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Qualcomm Hexagon DSP(q6 remote processor), which is utilized
+      for offloading WiFi processing tasks, this q6 remote processor operates in
+      conjunction with WiFi.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the remote processor
+    items:
+      - description: Shutdown WCSS pd
+      - description: Stop WCSS pd
+      - description: Spawn WCSS pd
+
+  qcom,smem-state-names:
+    description:
+      Names of the states used by the AP to signal the remote processor
+    items:
+      - const: shutdown
+      - const: stop
+      - const: spawn
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - memory-region
+  - memory-region-names
+  - qcom,rproc
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+
+    wifi0: wifi@c000000 {
+        compatible = "qcom,ipq5332-wifi";
+        reg = <0x0c000000 0x1000000>;
+        clocks = <&gcc GCC_XO_CLK>;
+        clock-names = "xo";
+        interrupts-extended = <&wcss_smp2p_in 8 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+                              <&wcss_smp2p_in 11 IRQ_TYPE_NONE>,
+                              <&intc GIC_SPI 559 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 560 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 561 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 422 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 423 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 424 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 425 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 426 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 427 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 428 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 429 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 430 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 491 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 493 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 544 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 454 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 453 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 452 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 451 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 484 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 549 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 500 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 450 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 449 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 447 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 543 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 482 IRQ_TYPE_EDGE_RISING>,
+                              <&intc GIC_SPI 419 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "fatal",
+                          "ready",
+                          "spawn",
+                          "stop-ack",
+                          "misc-pulse1",
+                          "misc-latch",
+                          "sw-exception",
+                          "ce0",
+                          "ce1",
+                          "ce2",
+                          "ce3",
+                          "ce4",
+                          "ce5",
+                          "ce6",
+                          "ce7",
+                          "ce8",
+                          "ce9",
+                          "ce10",
+                          "ce11",
+                          "host2wbm-desc-feed",
+                          "host2reo-re-injection",
+                          "host2reo-command",
+                          "host2rxdma-monitor-ring1",
+                          "reo2ost-exception",
+                          "wbm2host-rx-release",
+                          "reo2host-status",
+                          "reo2host-destination-ring4",
+                          "reo2host-destination-ring3",
+                          "reo2host-destination-ring2",
+                          "reo2host-destination-ring1",
+                          "rxdma2host-monitor-destination-mac3",
+                          "rxdma2host-monitor-destination-mac2",
+                          "rxdma2host-monitor-destination-mac1",
+                          "host2rxdma-host-buf-ring-mac3",
+                          "host2rxdma-host-buf-ring-mac2",
+                          "host2rxdma-host-buf-ring-mac1",
+                          "host2tcl-input-ring4",
+                          "host2tcl-input-ring3",
+                          "host2tcl-input-ring2",
+                          "host2tcl-input-ring1",
+                          "wbm2host-tx-completions-ring4",
+                          "wbm2host-tx-completions-ring3",
+                          "wbm2host-tx-completions-ring2",
+                          "wbm2host-tx-completions-ring1",
+                          "host2tx-monitor-ring1",
+                          "txmon2host-monitor-destination-mac3",
+                          "txmon2host-monitor-destination-mac2",
+                          "txmon2host-monitor-destination-mac1",
+                          "umac-reset";
+
+        memory-region = <&q6_region>, <&m3_dump>, <&q6_caldb>, <&mlo_mem>;
+        memory-region-names = "q6-region", "m3-dump", "q6-caldb", "mlo-global-mem";
+        qcom,calibration-variant = "RDP441_1";
+        qcom,rproc = <&q6v5_wcss>;
+        qcom,smem-states = <&wcss_smp2p_out 8>,
+                           <&wcss_smp2p_out 9>,
+                           <&wcss_smp2p_out 10>;
+        qcom,smem-state-names = "shutdown",
+                                "stop",
+                                "spawn";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml
new file mode 100644
index 000000000000..2769731e0708
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/realtek,rtl8188e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL8188E USB WiFi
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  Realtek RTL8188E is a family of USB-connected 2.4 GHz WiFi modules.
+
+allOf:
+  - $ref: /schemas/usb/usb-device.yaml#
+
+properties:
+  compatible:
+    const: usbbda,179  # RTL8188ETV
+
+  reg: true
+
+  vdd-supply:
+    description:
+      Regulator for the 3V3 supply.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi: wifi@1 {
+            compatible = "usbbda,179";
+            reg = <1>;
+            vdd-supply = <&vcc3v3>;
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
index 84e5659e50ef..6c0888ae4c4e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -71,15 +71,12 @@ properties:
       "Platform Data Set" in Silabs jargon). Default depends of "compatible"
       string. For "silabs,wf200", the default is 'wf200.pds'.
 
-  local-mac-address: true
-
-  mac-address: true
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/net/wireless/wireless-controller.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml
new file mode 100644
index 000000000000..7379f6c1aa05
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/wireless-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wireless Controller Common Properties
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+properties:
+  $nodename:
+    pattern: "^wifi(@.*)?$"
+
+allOf:
+  - $ref: ieee80211.yaml#
+  - $ref: /schemas/net/network-class.yaml#
+
+additionalProperties: true
+
+...
+
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/numa.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/numa.txt
deleted file mode 100644
index 42f282c2f3cc..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/numa.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-==============================================================================
-NUMA binding description.
-==============================================================================
-
-==============================================================================
-1 - Introduction
-==============================================================================
-
-Systems employing a Non Uniform Memory Access (NUMA) architecture contain
-collections of hardware resources including processors, memory, and I/O buses,
-that comprise what is commonly known as a NUMA node.
-Processor accesses to memory within the local NUMA node is generally faster
-than processor accesses to memory outside of the local NUMA node.
-DT defines interfaces that allow the platform to convey NUMA node
-topology information to OS.
-
-==============================================================================
-2 - numa-node-id
-==============================================================================
-
-For the purpose of identification, each NUMA node is associated with a unique
-token known as a node id. For the purpose of this binding
-a node id is a 32-bit integer.
-
-A device node is associated with a NUMA node by the presence of a
-numa-node-id property which contains the node id of the device.
-
-Example:
-	/* numa node 0 */
-	numa-node-id = <0>;
-
-	/* numa node 1 */
-	numa-node-id = <1>;
-
-==============================================================================
-3 - distance-map
-==============================================================================
-
-The optional device tree node distance-map describes the relative
-distance (memory latency) between all numa nodes.
-
-- compatible : Should at least contain "numa-distance-map-v1".
-
-- distance-matrix
-  This property defines a matrix to describe the relative distances
-  between all numa nodes.
-  It is represented as a list of node pairs and their relative distance.
-
-  Note:
-	1. Each entry represents distance from first node to second node.
-	The distances are equal in either direction.
-	2. The distance from a node to self (local distance) is represented
-	with value 10 and all internode distance should be represented with
-	a value greater than 10.
-	3. distance-matrix should have entries in lexicographical ascending
-	order of nodes.
-	4. There must be only one device node distance-map which must
-	reside in the root node.
-	5. If the distance-map node is not present, a default
-	distance-matrix is used.
-
-Example:
-	4 nodes connected in mesh/ring topology as below,
-
-		0_______20______1
-		|               |
-		|               |
-		20             20
-		|               |
-		|               |
-		|_______________|
-		3       20      2
-
-	if relative distance for each hop is 20,
-	then internode distance would be,
-	      0 -> 1 = 20
-	      1 -> 2 = 20
-	      2 -> 3 = 20
-	      3 -> 0 = 20
-	      0 -> 2 = 40
-	      1 -> 3 = 40
-
-     and dt presentation for this distance matrix is,
-
-		distance-map {
-			 compatible = "numa-distance-map-v1";
-			 distance-matrix = <0 0  10>,
-					   <0 1  20>,
-					   <0 2  40>,
-					   <0 3  20>,
-					   <1 0  20>,
-					   <1 1  10>,
-					   <1 2  20>,
-					   <1 3  40>,
-					   <2 0  40>,
-					   <2 1  20>,
-					   <2 2  10>,
-					   <2 3  20>,
-					   <3 0  20>,
-					   <3 1  40>,
-					   <3 2  20>,
-					   <3 3  10>;
-		};
-
-==============================================================================
-4 - Empty memory nodes
-==============================================================================
-
-Empty memory nodes, which no memory resides in, are allowed. There are no
-device nodes for these empty memory nodes. However, the NUMA node IDs and
-distance maps are still valid and memory may be added into them through
-hotplug afterwards.
-
-Example:
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-		numa-node-id = <0>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-		numa-node-id = <1>;
-	};
-
-	/* Empty memory node 2 and 3 */
-	distance-map {
-		compatible = "numa-distance-map-v1";
-		distance-matrix = <0 0  10>,
-				  <0 1  20>,
-				  <0 2  40>,
-				  <0 3  20>,
-				  <1 0  20>,
-				  <1 1  10>,
-				  <1 2  20>,
-				  <1 3  40>,
-				  <2 0  40>,
-				  <2 1  20>,
-				  <2 2  10>,
-				  <2 3  20>,
-				  <3 0  20>,
-				  <3 1  40>,
-				  <3 2  20>,
-				  <3 3  10>;
-	};
-
-==============================================================================
-5 - Example dts
-==============================================================================
-
-Dual socket system consists of 2 boards connected through ccn bus and
-each board having one socket/soc of 8 cpus, memory and pci bus.
-
-	memory@c00000 {
-		device_type = "memory";
-		reg = <0x0 0xc00000 0x0 0x80000000>;
-		/* node 0 */
-		numa-node-id = <0>;
-	};
-
-	memory@10000000000 {
-		device_type = "memory";
-		reg = <0x100 0x0 0x0 0x80000000>;
-		/* node 1 */
-		numa-node-id = <1>;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			/* node 0 */
-			numa-node-id = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@4 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x4>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@5 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x5>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@6 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x6>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@7 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x7>;
-			enable-method = "psci";
-			numa-node-id = <0>;
-		};
-		cpu@8 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x8>;
-			enable-method = "psci";
-			/* node 1 */
-			numa-node-id = <1>;
-		};
-		cpu@9 {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0x9>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@a {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xa>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@b {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xb>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@c {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xc>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@d {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xd>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@e {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xe>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-		cpu@f {
-			device_type = "cpu";
-			compatible =  "arm,armv8";
-			reg = <0x0 0xf>;
-			enable-method = "psci";
-			numa-node-id = <1>;
-		};
-	};
-
-	pcie0: pcie0@848000000000 {
-		compatible = "arm,armv8";
-		device_type = "pci";
-		bus-range = <0 255>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x8480 0x00000000 0 0x10000000>;  /* Configuration space */
-		ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x70 0x00000000>;
-		/* node 0 */
-		numa-node-id = <0>;
-        };
-
-	pcie1: pcie1@948000000000 {
-		compatible = "arm,armv8";
-		device_type = "pci";
-		bus-range = <0 255>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x9480 0x00000000 0 0x10000000>;  /* Configuration space */
-		ranges = <0x03000000 0x9010 0x00000000 0x9010 0x00000000 0x70 0x00000000>;
-		/* node 1 */
-		numa-node-id = <1>;
-        };
-
-	distance-map {
-		compatible = "numa-distance-map-v1";
-		distance-matrix = <0 0 10>,
-				  <0 1 20>,
-				  <1 1 10>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml
new file mode 100644
index 000000000000..80b5a6cdcec9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/apple,spmi-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SPMI NVMEM
+
+description: Exports a series of SPMI registers as NVMEM cells
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,maverick-pmic
+          - apple,sera-pmic
+          - apple,stowe-pmic
+      - const: apple,spmi-nvmem
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@f {
+        compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+        reg = <0xf SPMI_USID>;
+
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            boot_stage: boot-stage@6001 {
+                reg = <0x6001 0x1>;
+            };
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/nvmem/maxim,max77759-nvmem.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/nvmem/maxim,max77759-nvmem.yaml
new file mode 100644
index 000000000000..1e3bd4433007
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/nvmem/maxim,max77759-nvmem.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/maxim,max77759-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77759 Non Volatile Memory
+
+maintainers:
+  - André Draszik <andre.draszik@linaro.org>
+
+description: |
+  This module is part of the MAX77759 PMIC. For additional information, see
+  Documentation/devicetree/bindings/mfd/maxim,max77759.yaml.
+
+  The MAX77759 is a PMIC integrating, amongst others, Non Volatile Memory
+  (NVMEM) with 30 bytes of storage which can be used by software to store
+  information or communicate with a boot loader.
+
+properties:
+  compatible:
+    const: maxim,max77759-nvmem
+
+  wp-gpios: false
+
+required:
+  - compatible
+
+allOf:
+  - $ref: nvmem.yaml#
+
+unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/opp/opp-v1.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/opp/opp-v1.yaml
index 07e26c267815..61c080e50859 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/opp/opp-v1.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -18,9 +18,21 @@ description: |+
 
   This binding only supports voltage-frequency pairs.
 
-select: true
+deprecated: true
 
 properties:
+  clock-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The latency in nanoseconds for clock changes. Use OPP tables for new
+      designs instead.
+
+  voltage-tolerance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 10
+    description:
+      The voltage tolerance in percent. Use OPP tables for new designs instead.
+
   operating-points:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
@@ -28,8 +40,12 @@ properties:
         - description: Frequency in kHz
         - description: Voltage for OPP in uV
 
+dependencies:
+  clock-latency: [ operating-points ]
+  voltage-tolerance: [ operating-points ]
 
 additionalProperties: true
+
 examples:
   - |
     cpus {
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml
new file mode 100644
index 000000000000..a27ba7b663d4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-adreno.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno compatible OPP supply
+
+description:
+  Adreno GPUs present in Qualcomm's Snapdragon chipsets uses an OPP specific
+  ACD related information tailored for the specific chipset. This binding
+  provides the information needed to describe such a hardware value.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: operating-points-v2-adreno
+
+patternProperties:
+  '^opp-[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-hz: true
+
+      opp-level: true
+
+      opp-peak-kBps: true
+
+      opp-supported-hw: true
+
+      qcom,opp-acd-level:
+        description: |
+          A positive value representing the ACD (Adaptive Clock Distribution,
+          a fancy name for clk throttling during voltage droop) level associated
+          with this OPP node. This value is shared to a co-processor inside GPU
+          (called Graphics Management Unit a.k.a GMU) during wake up. It may not
+          be present for some OPPs and GMU will disable ACD while transitioning
+          to that OPP. This value encodes a voltage threshold, delay cycles &
+          calibration margins which are identified by characterization of the
+          SoC. So, it doesn't have any unit. This data is passed to GMU firmware
+          via 'HFI_H2F_MSG_ACD' packet.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - opp-hz
+      - opp-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    gpu_opp_table: opp-table {
+        compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+        opp-687000000 {
+            opp-hz = /bits/ 64 <687000000>;
+            opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+            opp-peak-kBps = <8171875>;
+            qcom,opp-acd-level = <0x882e5ffd>;
+        };
+
+        opp-550000000 {
+            opp-hz = /bits/ 64 <550000000>;
+            opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+            opp-peak-kBps = <6074219>;
+            qcom,opp-acd-level = <0xc0285ffd>;
+        };
+
+        opp-390000000 {
+            opp-hz = /bits/ 64 <390000000>;
+            opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+            opp-peak-kBps = <3000000>;
+            qcom,opp-acd-level = <0xc0285ffd>;
+        };
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+            opp-peak-kBps = <2136719>;
+            /* Intentionally left out qcom,opp-acd-level property here */
+        };
+
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/apple,pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/apple,pcie.yaml
index c8775f9cb071..c0852be04f6d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/apple,pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -17,6 +17,10 @@ description: |
   implements its root ports.  But the ATU found on most DesignWare
   PCIe host bridges is absent.
 
+  On systems derived from T602x, the PHY registers are in a region
+  separate from the port registers. In that case, there is one PHY
+  register range per port register range.
+
   All root ports share a single ECAM space, but separate GPIOs are
   used to take the PCI devices on those ports out of reset.  Therefore
   the standard "reset-gpios" and "max-link-speed" properties appear on
@@ -30,16 +34,18 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - apple,t8103-pcie
-          - apple,t8112-pcie
-          - apple,t6000-pcie
-      - const: apple,pcie
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-pcie
+              - apple,t8112-pcie
+              - apple,t6000-pcie
+          - const: apple,pcie
+      - const: apple,t6020-pcie
 
   reg:
     minItems: 3
-    maxItems: 6
+    maxItems: 10
 
   reg-names:
     minItems: 3
@@ -50,6 +56,10 @@ properties:
       - const: port1
       - const: port2
       - const: port3
+      - const: phy0
+      - const: phy1
+      - const: phy2
+      - const: phy3
 
   ranges:
     minItems: 2
@@ -98,6 +108,15 @@ allOf:
           maxItems: 5
         interrupts:
           maxItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t6020-pcie
+    then:
+      properties:
+        reg-names:
+          minItems: 10
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 29f0e1eb5096..c4f9674e8695 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -186,49 +186,48 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     scb {
-            #address-cells = <2>;
-            #size-cells = <1>;
-            pcie0: pcie@7d500000 {
-                    compatible = "brcm,bcm2711-pcie";
-                    reg = <0x0 0x7d500000 0x9310>;
-                    device_type = "pci";
-                    #address-cells = <3>;
-                    #size-cells = <2>;
-                    #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-                    interrupt-names = "pcie", "msi";
-                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
-                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
-                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
-                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-
-                    msi-parent = <&pcie0>;
-                    msi-controller;
-                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
-                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
-                    brcm,enable-ssc;
-                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
-
-                    /* PCIe bridge, Root Port */
-                    pci@0,0 {
-                            #address-cells = <3>;
-                            #size-cells = <2>;
-                            reg = <0x0 0x0 0x0 0x0 0x0>;
-                            compatible = "pciclass,0604";
-                            device_type = "pci";
-                            vpcie3v3-supply = <&vreg7>;
-                            ranges;
-
-                            /* PCIe endpoint */
-                            pci-ep@0,0 {
-                                    assigned-addresses =
-                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
-                                    reg = <0x0 0x0 0x0 0x0 0x0>;
-                                    compatible = "pci14e4,1688";
-                            };
-                    };
+        #address-cells = <2>;
+        #size-cells = <1>;
+        pcie0: pcie@7d500000 {
+            compatible = "brcm,bcm2711-pcie";
+            reg = <0x0 0x7d500000 0x9310>;
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pcie", "msi";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                             0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                             0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                             0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+            msi-parent = <&pcie0>;
+            msi-controller;
+            ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+            dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                         <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
+            brcm,enable-ssc;
+            brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+            /* PCIe bridge, Root Port */
+            pci@0,0 {
+                #address-cells = <3>;
+                #size-cells = <2>;
+                reg = <0x0 0x0 0x0 0x0 0x0>;
+                compatible = "pciclass,0604";
+                device_type = "pci";
+                vpcie3v3-supply = <&vreg7>;
+                ranges;
+
+                /* PCIe endpoint */
+                pci-ep@0,0 {
+                    assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                    compatible = "pci14e4,1688";
+                };
             };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 98651ab22103..8735293962ee 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -37,14 +37,14 @@ examples:
         #size-cells = <2>;
 
         pcie-ep@fc000000 {
-                compatible = "cdns,cdns-pcie-ep";
-                reg = <0x0 0xfc000000 0x0 0x01000000>,
-                      <0x0 0x80000000 0x0 0x40000000>;
-                reg-names = "reg", "mem";
-                cdns,max-outbound-regions = <16>;
-                max-functions = /bits/ 8 <8>;
-                phys = <&pcie_phy0>;
-                phy-names = "pcie-phy";
+            compatible = "cdns,cdns-pcie-ep";
+            reg = <0x0 0xfc000000 0x0 0x01000000>,
+                  <0x0 0x80000000 0x0 0x40000000>;
+            reg-names = "reg", "mem";
+            cdns,max-outbound-regions = <16>;
+            max-functions = /bits/ 8 <8>;
+            phys = <&pcie_phy0>;
+            phy-names = "pcie-phy";
         };
     };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
index 730e63fd7669..b19f61ae72fb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -53,17 +53,17 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     pcie-ep@37000000 {
-          compatible = "intel,keembay-pcie-ep";
-          reg = <0x37000000 0x00001000>,
-                <0x37100000 0x00001000>,
-                <0x37300000 0x00001000>,
-                <0x36000000 0x01000000>,
-                <0x37800000 0x00000200>;
-          reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
-          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
-                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
-          num-lanes = <2>;
+        compatible = "intel,keembay-pcie-ep";
+        reg = <0x37000000 0x00001000>,
+              <0x37100000 0x00001000>,
+              <0x37300000 0x00001000>,
+              <0x36000000 0x01000000>,
+              <0x37800000 0x00000200>;
+        reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+        num-lanes = <2>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
index 1fd557504b10..dd71e3d6bf94 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -75,23 +75,23 @@ examples:
     #define KEEM_BAY_A53_PCIE
     #define KEEM_BAY_A53_AUX_PCIE
     pcie@37000000 {
-          compatible = "intel,keembay-pcie";
-          reg = <0x37000000 0x00001000>,
-                <0x37300000 0x00001000>,
-                <0x36e00000 0x00200000>,
-                <0x37800000 0x00000200>;
-          reg-names = "dbi", "atu", "config", "apb";
-          #address-cells = <3>;
-          #size-cells = <2>;
-          device_type = "pci";
-          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
-          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-names = "pcie", "pcie_ev", "pcie_err";
-          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
-                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
-          clock-names = "master", "aux";
-          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
-          num-lanes = <2>;
+        compatible = "intel,keembay-pcie";
+        reg = <0x37000000 0x00001000>,
+              <0x37300000 0x00001000>,
+              <0x36e00000 0x00200000>,
+              <0x37800000 0x00000200>;
+        reg-names = "dbi", "atu", "config", "apb";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "pcie", "pcie_ev", "pcie_err";
+        clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+                 <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+        clock-names = "master", "aux";
+        reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+        num-lanes = <2>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
new file mode 100644
index 000000000000..f3ba9230ce2a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/marvell,armada8k-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K PCIe interface
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+description:
+  This PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - marvell,armada8k-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - marvell,armada8k-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: config
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: reg
+
+  interrupts:
+    maxItems: 1
+
+  msi-parent:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    maxItems: 4
+
+  phy-names:
+    minItems: 1
+    maxItems: 4
+
+  marvell,reset-gpio:
+    maxItems: 1
+    deprecated: true
+
+required:
+  - interrupt-map
+  - clocks
+  - msi-parent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pcie@f2600000 {
+        compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+        reg = <0xf2600000 0x10000>, <0xf6f00000 0x80000>;
+        reg-names = "ctrl", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        dma-coherent;
+        msi-parent = <&gic_v2m0>;
+
+        ranges = <0x81000000 0 0xf9000000 0xf9000000 0 0x10000>,  /* downstream I/O */
+                 <0x82000000 0 0xf6000000 0xf6000000 0 0xf00000>;  /* non-prefetchable memory */
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        num-lanes = <1>;
+        clocks = <&cpm_syscon0 1 13>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml
new file mode 100644
index 000000000000..7be695320ddf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/marvell,kirkwood-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU PCIe interfaces
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+  - Pali Rohár <pali@kernel.org>
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-370-pcie
+      - marvell,armada-xp-pcie
+      - marvell,dove-pcie
+      - marvell,kirkwood-pcie
+
+  ranges:
+    description: >
+      The ranges describing the MMIO registers have the following layout:
+
+        0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+      where:
+
+        * r is a 32-bits value that gives the offset of the MMIO registers of
+        this PCIe interface, from the base of the internal registers.
+
+        * s is a 32-bits value that give the size of this MMIO registers area.
+        This range entry translates the '0x82000000 0 r' PCI address into the
+        'MBUS_ID(0xf0, 0x01) r' CPU address, which is part of the internal
+        register window (as identified by MBUS_ID(0xf0, 0x01)).
+
+      The ranges describing the MBus windows have the following layout:
+
+          0x8t000000 s 0     MBUS_ID(w, a) 0 1 0
+
+      where:
+
+        * t is the type of the MBus window (as defined by the standard PCI DT
+        bindings), 1 for I/O and 2 for memory.
+
+        * s is the PCI slot that corresponds to this PCIe interface
+
+        * w is the 'target ID' value for the MBus window
+
+        * a the 'attribute' value for the MBus window.
+
+      Since the location and size of the different MBus windows is not fixed in
+      hardware, and only determined in runtime, those ranges cover the full first
+      4 GB of the physical address space, and do not translate into a valid CPU
+      address.
+
+  msi-parent:
+    maxItems: 1
+
+patternProperties:
+  '^pcie@':
+    type: object
+    allOf:
+      - $ref: /schemas/pci/pci-bus-common.yaml#
+      - $ref: /schemas/pci/pci-device.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      clocks:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: intx
+          - const: error
+
+      reset-delay-us:
+        default: 100000
+        description: todo
+
+      marvell,pcie-port:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+        description: todo
+
+      marvell,pcie-lane:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+        description: todo
+
+      interrupt-controller:
+        type: object
+        additionalProperties: false
+
+        properties:
+          interrupt-controller: true
+
+          '#interrupt-cells':
+            const: 1
+
+    required:
+      - assigned-addresses
+      - clocks
+      - interrupt-map
+      - marvell,pcie-port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@f001000000000000 {
+            compatible = "marvell,armada-xp-pcie";
+            device_type = "pci";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            bus-range = <0x00 0xff>;
+            msi-parent = <&mpic>;
+
+            ranges =
+                  <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000  /* Port 0.0 registers */
+                    0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000  /* Port 2.0 registers */
+                    0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000  /* Port 0.1 registers */
+                    0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000  /* Port 0.2 registers */
+                    0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000  /* Port 0.3 registers */
+                    0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000  /* Port 1.0 registers */
+                    0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000  /* Port 3.0 registers */
+                    0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000  /* Port 1.1 registers */
+                    0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000  /* Port 1.2 registers */
+                    0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000  /* Port 1.3 registers */
+                    0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+                    0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+                    0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+                    0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+                    0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+                    0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+                    0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+                    0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+                    0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+                    0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+                    0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+                    0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+                    0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+                    0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+                    0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+                    0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+                    0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+                    0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+                    0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+                    0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+            pcie@1,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+                reg = <0x0800 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                    0x81000000 0 0 0x81000000 0x1 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 58>;
+                marvell,pcie-port = <0>;
+                marvell,pcie-lane = <0>;
+                num-lanes = <1>;
+                /* low-active PERST# reset on GPIO 25 */
+                reset-gpios = <&gpio0 25 1>;
+                /* wait 20ms for device settle after reset deassertion */
+                reset-delay-us = <20000>;
+                clocks = <&gateclk 5>;
+            };
+
+            pcie@2,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+                reg = <0x1000 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                    0x81000000 0 0 0x81000000 0x2 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 59>;
+                marvell,pcie-port = <0>;
+                marvell,pcie-lane = <1>;
+                num-lanes = <1>;
+                clocks = <&gateclk 6>;
+            };
+
+            pcie@3,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+                reg = <0x1800 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+                    0x81000000 0 0 0x81000000 0x3 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 60>;
+                marvell,pcie-port = <0>;
+                marvell,pcie-lane = <2>;
+                num-lanes = <1>;
+                clocks = <&gateclk 7>;
+            };
+
+            pcie@4,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+                reg = <0x2000 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+                    0x81000000 0 0 0x81000000 0x4 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 61>;
+                marvell,pcie-port = <0>;
+                marvell,pcie-lane = <3>;
+                num-lanes = <1>;
+                clocks = <&gateclk 8>;
+            };
+
+            pcie@5,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+                reg = <0x2800 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+                    0x81000000 0 0 0x81000000 0x5 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 62>;
+                marvell,pcie-port = <1>;
+                marvell,pcie-lane = <0>;
+                num-lanes = <1>;
+                clocks = <&gateclk 9>;
+            };
+
+            pcie@6,0 {
+                device_type = "pci";
+                assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+                reg = <0x3000 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+                    0x81000000 0 0 0x81000000 0x6 0 1 0>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &mpic 63>;
+                marvell,pcie-port = <1>;
+                marvell,pcie-lane = <1>;
+                num-lanes = <1>;
+                clocks = <&gateclk 10>;
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index 103574d18dbc..47b0bad690d5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -50,7 +50,7 @@ properties:
     items:
       pattern: '^fic[0-3]$'
 
-  dma-coherent: true
+  dma-noncoherent: true
 
   ranges:
     minItems: 1
@@ -65,33 +65,33 @@ unevaluatedProperties: false
 examples:
   - |
     soc {
-            #address-cells = <2>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie0: pcie@2030000000 {
+            compatible = "microchip,pcie-host-1.0";
+            reg = <0x0 0x70000000 0x0 0x08000000>,
+                  <0x0 0x43008000 0x0 0x00002000>,
+                  <0x0 0x4300a000 0x0 0x00002000>;
+            reg-names = "cfg", "bridge", "ctrl";
+            device_type = "pci";
+            #address-cells = <3>;
             #size-cells = <2>;
-            pcie0: pcie@2030000000 {
-                    compatible = "microchip,pcie-host-1.0";
-                    reg = <0x0 0x70000000 0x0 0x08000000>,
-                          <0x0 0x43008000 0x0 0x00002000>,
-                          <0x0 0x4300a000 0x0 0x00002000>;
-                    reg-names = "cfg", "bridge", "ctrl";
-                    device_type = "pci";
-                    #address-cells = <3>;
-                    #size-cells = <2>;
-                    #interrupt-cells = <1>;
-                    interrupts = <119>;
-                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-                                    <0 0 0 2 &pcie_intc0 1>,
-                                    <0 0 0 3 &pcie_intc0 2>,
-                                    <0 0 0 4 &pcie_intc0 3>;
-                    interrupt-parent = <&plic0>;
-                    msi-parent = <&pcie0>;
-                    msi-controller;
-                    bus-range = <0x00 0x7f>;
-                    ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
-                    pcie_intc0: interrupt-controller {
-                        #address-cells = <0>;
-                        #interrupt-cells = <1>;
-                        interrupt-controller;
-                    };
+            #interrupt-cells = <1>;
+            interrupts = <119>;
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                            <0 0 0 2 &pcie_intc0 1>,
+                            <0 0 0 3 &pcie_intc0 2>,
+                            <0 0 0 4 &pcie_intc0 3>;
+            interrupt-parent = <&plic0>;
+            msi-parent = <&pcie0>;
+            msi-controller;
+            bus-range = <0x00 0x7f>;
+            ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+            pcie_intc0: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
             };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/mvebu-pci.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/mvebu-pci.txt
deleted file mode 100644
index 6d022a9d36ee..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ /dev/null
@@ -1,310 +0,0 @@
-* Marvell EBU PCIe interfaces
-
-Mandatory properties:
-
-- compatible: one of the following values:
-    marvell,armada-370-pcie
-    marvell,armada-xp-pcie
-    marvell,dove-pcie
-    marvell,kirkwood-pcie
-- #address-cells, set to <3>
-- #size-cells, set to <2>
-- #interrupt-cells, set to <1>
-- bus-range: PCI bus numbers covered
-- device_type, set to "pci"
-- ranges: ranges describing the MMIO registers to control the PCIe
-  interfaces, and ranges describing the MBus windows needed to access
-  the memory and I/O regions of each PCIe interface.
-- msi-parent: Link to the hardware entity that serves as the Message
-  Signaled Interrupt controller for this PCI controller.
-
-The ranges describing the MMIO registers have the following layout:
-
-    0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
-
-where:
-
-  * r is a 32-bits value that gives the offset of the MMIO
-  registers of this PCIe interface, from the base of the internal
-  registers.
-
-  * s is a 32-bits value that give the size of this MMIO
-  registers area. This range entry translates the '0x82000000 0 r' PCI
-  address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
-  of the internal register window (as identified by MBUS_ID(0xf0,
-  0x01)).
-
-The ranges describing the MBus windows have the following layout:
-
-    0x8t000000 s 0     MBUS_ID(w, a) 0 1 0
-
-where:
-
-   * t is the type of the MBus window (as defined by the standard PCI DT
-   bindings), 1 for I/O and 2 for memory.
-
-   * s is the PCI slot that corresponds to this PCIe interface
-
-   * w is the 'target ID' value for the MBus window
-
-   * a the 'attribute' value for the MBus window.
-
-Since the location and size of the different MBus windows is not fixed in
-hardware, and only determined in runtime, those ranges cover the full first
-4 GB of the physical address space, and do not translate into a valid CPU
-address.
-
-In addition, the device tree node must have sub-nodes describing each
-PCIe interface, having the following mandatory properties:
-
-- reg: used only for interrupt mapping, so only the first four bytes
-  are used to refer to the correct bus number and device number.
-- assigned-addresses: reference to the MMIO registers used to control
-  this PCIe interface.
-- clocks: the clock associated to this PCIe interface
-- marvell,pcie-port: the physical PCIe port number
-- status: either "disabled" or "okay"
-- device_type, set to "pci"
-- #address-cells, set to <3>
-- #size-cells, set to <2>
-- #interrupt-cells, set to <1>
-- ranges, translating the MBus windows ranges of the parent node into
-  standard PCI addresses.
-- interrupt-map-mask and interrupt-map, standard PCI properties to
-  define the mapping of the PCIe interface to interrupt numbers.
-
-and the following optional properties:
-- marvell,pcie-lane: the physical PCIe lane number, for ports having
-  multiple lanes. If this property is not found, we assume that the
-  value is 0.
-- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
-- reset-gpios: optional GPIO to PERST#
-- reset-delay-us: delay in us to wait after reset de-assertion, if not
-  specified will default to 100ms, as required by the PCIe specification.
-- interrupt-names: list of interrupt names, supported are:
-   - "intx" - interrupt line triggered by one of the legacy interrupt
-- interrupts or interrupts-extended: List of the interrupt sources which
-  corresponding to the "interrupt-names". If non-empty then also additional
-  'interrupt-controller' subnode must be defined.
-
-Example:
-
-pcie-controller {
-	compatible = "marvell,armada-xp-pcie";
-	device_type = "pci";
-
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bus-range = <0x00 0xff>;
-	msi-parent = <&mpic>;
-
-	ranges =
-	       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000	/* Port 0.0 registers */
-		0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000	/* Port 2.0 registers */
-		0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000	/* Port 0.1 registers */
-		0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000	/* Port 0.2 registers */
-		0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000	/* Port 0.3 registers */
-		0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000	/* Port 1.0 registers */
-		0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000	/* Port 3.0 registers */
-		0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000	/* Port 1.1 registers */
-		0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000	/* Port 1.2 registers */
-		0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000	/* Port 1.3 registers */
-		0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-		0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-		0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-		0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-		0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-		0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-		0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-		0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-		0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-		0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-		0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-		0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-		0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-		0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-		0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-		0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-		0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-		0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-		0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-		0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-	pcie@1,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-		reg = <0x0800 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-			  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 58>;
-		marvell,pcie-port = <0>;
-		marvell,pcie-lane = <0>;
-		num-lanes = <1>;
-		/* low-active PERST# reset on GPIO 25 */
-		reset-gpios = <&gpio0 25 1>;
-		/* wait 20ms for device settle after reset deassertion */
-		reset-delay-us = <20000>;
-		clocks = <&gateclk 5>;
-	};
-
-	pcie@2,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-		reg = <0x1000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-			  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 59>;
-		marvell,pcie-port = <0>;
-		marvell,pcie-lane = <1>;
-		num-lanes = <1>;
-		clocks = <&gateclk 6>;
-	};
-
-	pcie@3,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-		reg = <0x1800 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-			  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 60>;
-		marvell,pcie-port = <0>;
-		marvell,pcie-lane = <2>;
-		num-lanes = <1>;
-		clocks = <&gateclk 7>;
-	};
-
-	pcie@4,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-		reg = <0x2000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-			  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 61>;
-		marvell,pcie-port = <0>;
-		marvell,pcie-lane = <3>;
-		num-lanes = <1>;
-		clocks = <&gateclk 8>;
-	};
-
-	pcie@5,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-		reg = <0x2800 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-			  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 62>;
-		marvell,pcie-port = <1>;
-		marvell,pcie-lane = <0>;
-		num-lanes = <1>;
-		clocks = <&gateclk 9>;
-	};
-
-	pcie@6,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-		reg = <0x3000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-			  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 63>;
-		marvell,pcie-port = <1>;
-		marvell,pcie-lane = <1>;
-		num-lanes = <1>;
-		clocks = <&gateclk 10>;
-	};
-
-	pcie@7,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-		reg = <0x3800 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-			  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 64>;
-		marvell,pcie-port = <1>;
-		marvell,pcie-lane = <2>;
-		num-lanes = <1>;
-		clocks = <&gateclk 11>;
-	};
-
-	pcie@8,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-		reg = <0x4000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-			  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 65>;
-		marvell,pcie-port = <1>;
-		marvell,pcie-lane = <3>;
-		num-lanes = <1>;
-		clocks = <&gateclk 12>;
-	};
-
-	pcie@9,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-		reg = <0x4800 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-			  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 99>;
-		marvell,pcie-port = <2>;
-		marvell,pcie-lane = <0>;
-		num-lanes = <1>;
-		clocks = <&gateclk 26>;
-	};
-
-	pcie@a,0 {
-		device_type = "pci";
-		assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-		reg = <0x5000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-			  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &mpic 103>;
-		marvell,pcie-port = <3>;
-		marvell,pcie-lane = <0>;
-		num-lanes = <1>;
-		clocks = <&gateclk 27>;
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
index a24fb8307d29..6d6052a2748f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -74,7 +74,7 @@ properties:
 
   reset-gpios:
     description: Must contain a phandle to a GPIO controller followed by GPIO
-      that is being used as PERST input signal. Please refer to pci.txt.
+      that is being used as PERST input signal.
 
   phys:
     minItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-armada8k.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci-armada8k.txt
deleted file mode 100644
index ff25a134befa..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Marvell Armada 7K/8K PCIe interface
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: "marvell,armada8k-pcie"
-- reg: must contain two register regions
-   - the control register region
-   - the config space region
-- reg-names:
-   - "ctrl" for the control register region
-   - "config" for the config space region
-- interrupts: Interrupt specifier for the PCIe controller
-- clocks: reference to the PCIe controller clocks
-- clock-names: mandatory if there is a second clock, in this case the
-   name must be "core" for the first clock and "reg" for the second
-   one
-
-Optional properties:
-- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
-	Either 1, 2 or 4 PHYs might be needed depending on the number of
-	PCIe lanes.
-- phy-names: names of the PHYs corresponding to the number of lanes.
-	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
-	2 PHYs.
-
-Example:
-
-	pcie@f2600000 {
-		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
-		reg-names = "ctrl", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		dma-coherent;
-
-		bus-range = <0 0xff>;
-		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
-			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <1>;
-		clocks = <&cpm_syscon0 1 13>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
index f75000e3093d..214caa4ec3d5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -17,6 +17,24 @@ properties:
   $nodename:
     pattern: "^pcie-ep@"
 
+  iommu-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Device ID (see msi-map) base
+          maximum: 0x7ffff
+        - description: phandle to IOMMU
+        - description: IOMMU specifier base (currently always 1 cell)
+        - description: Number of Device IDs
+          maximum: 0x80000
+
+  iommu-map-mask:
+    description:
+      A mask to be applied to each Device ID prior to being mapped to an
+      IOMMU specifier per the iommu-map property.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x7ffff
+
   max-functions:
     description: Maximum number of functions that can be configured
     $ref: /schemas/types.yaml#/definitions/uint8
@@ -35,6 +53,56 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 1, 2, 3, 4 ]
 
+  msi-map:
+    description: |
+      Maps a Device ID to an MSI and associated MSI specifier data.
+
+      A PCI Endpoint (EP) can use MSI as a doorbell function. This is achieved by
+      mapping the MSI controller's address into PCI BAR<n>. The PCI Root Complex
+      can write to this BAR<n>, triggering the EP to generate IRQ. This notifies
+      the EP-side driver of an event, eliminating the need for the driver to
+      continuously poll for status changes.
+
+      However, the EP cannot rely on Requester ID (RID) because the RID is
+      determined by the PCI topology of the host system. Since the EP may be
+      connected to different PCI hosts, the RID can vary between systems and is
+      therefore not a reliable identifier.
+
+      Each EP can support up to 8 physical functions and up to 65,536 virtual
+      functions. To uniquely identify each child device, a device ID is defined
+      as
+         - Bits [2:0] for the function number (func)
+         - Bits [18:3] for the virtual function index (vfunc)
+
+      The resulting device ID is computed as:
+
+        (func & 0x7) | (vfunc << 3)
+
+      The property is an arbitrary number of tuples of
+      (device-id-base, msi, msi-base,length).
+
+      Any Device ID id in the interval [id-base, id-base + length) is
+      associated with the listed MSI, with the MSI specifier
+      (id - id-base + msi-base).
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: The Device ID base matched by the entry
+          maximum: 0x7ffff
+        - description: phandle to msi-controller node
+        - description: (optional) The msi-specifier produced for the first
+            Device ID matched by the entry. Currently, msi-specifier is 0 or
+            1 cells.
+        - description: The length of consecutive Device IDs following the
+            Device ID base
+          maximum: 0x80000
+
+  msi-map-mask:
+    description: A mask to be applied to each Device ID prior to being
+      mapped to an msi-specifier per the msi-map property.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x7ffff
+
   num-lanes:
     description: maximum number of lanes
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-iommu.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci-iommu.txt
deleted file mode 100644
index 0def586fdcdf..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-iommu.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-This document describes the generic device tree binding for describing the
-relationship between PCI(e) devices and IOMMU(s).
-
-Each PCI(e) device under a root complex is uniquely identified by its Requester
-ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
-Function number.
-
-For the purpose of this document, when treated as a numeric value, a RID is
-formatted such that:
-
-* Bits [15:8] are the Bus number.
-* Bits [7:3] are the Device number.
-* Bits [2:0] are the Function number.
-* Any other bits required for padding must be zero.
-
-IOMMUs may distinguish PCI devices through sideband data derived from the
-Requester ID. While a given PCI device can only master through one IOMMU, a
-root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per
-bus).
-
-The generic 'iommus' property is insufficient to describe this relationship,
-and a mechanism is required to map from a PCI device to its IOMMU and sideband
-data.
-
-For generic IOMMU bindings, see
-Documentation/devicetree/bindings/iommu/iommu.txt.
-
-
-PCI root complex
-================
-
-Optional properties
--------------------
-
-- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
-  data.
-
-  The property is an arbitrary number of tuples of
-  (rid-base,iommu,iommu-base,length).
-
-  Any RID r in the interval [rid-base, rid-base + length) is associated with
-  the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
-
-- iommu-map-mask: A mask to be applied to each Requester ID prior to being
-  mapped to an IOMMU specifier per the iommu-map property.
-
-
-Example (1)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	iommu: iommu@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the IOMMU is the RID,
-		 * identity-mapped.
-		 */
-		iommu-map = <0x0 &iommu 0x0 0x10000>;
-	};
-};
-
-
-Example (2)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	iommu: iommu@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the IOMMU is the RID with the
-		 * function bits masked out.
-		 */
-		iommu-map = <0x0 &iommu 0x0 0x10000>;
-		iommu-map-mask = <0xfff8>;
-	};
-};
-
-
-Example (3)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	iommu: iommu@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the IOMMU is the RID,
-		 * but the high bits of the bus number are flipped.
-		 */
-		iommu-map = <0x0000 &iommu 0x8000 0x8000>,
-			    <0x8000 &iommu 0x0000 0x8000>;
-	};
-};
-
-
-Example (4)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	iommu_a: iommu@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	iommu_b: iommu@b {
-		reg = <0xb 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	iommu_c: iommu@c {
-		reg = <0xc 0x1>;
-		compatible = "vendor,some-iommu";
-		#iommu-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * Devices with bus number 0-127 are mastered via IOMMU
-		 * a, with sideband data being RID[14:0].
-		 * Devices with bus number 128-255 are mastered via
-		 * IOMMU b, with sideband data being RID[14:0].
-		 * No devices master via IOMMU c.
-		 */
-		iommu-map = <0x0000 &iommu_a 0x0000 0x8000>,
-			    <0x8000 &iommu_b 0x0000 0x8000>;
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-msi.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci-msi.txt
deleted file mode 100644
index b73d839657b6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci-msi.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-This document describes the generic device tree binding for describing the
-relationship between PCI devices and MSI controllers.
-
-Each PCI device under a root complex is uniquely identified by its Requester ID
-(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
-Function number.
-
-For the purpose of this document, when treated as a numeric value, a RID is
-formatted such that:
-
-* Bits [15:8] are the Bus number.
-* Bits [7:3] are the Device number.
-* Bits [2:0] are the Function number.
-* Any other bits required for padding must be zero.
-
-MSIs may be distinguished in part through the use of sideband data accompanying
-writes. In the case of PCI devices, this sideband data may be derived from the
-Requester ID. A mechanism is required to associate a device with both the MSI
-controllers it can address, and the sideband data that will be associated with
-its writes to those controllers.
-
-For generic MSI bindings, see
-Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-
-PCI root complex
-================
-
-Optional properties
--------------------
-
-- msi-map: Maps a Requester ID to an MSI controller and associated
-  msi-specifier data. The property is an arbitrary number of tuples of
-  (rid-base,msi-controller,msi-base,length), where:
-
-  * rid-base is a single cell describing the first RID matched by the entry.
-
-  * msi-controller is a single phandle to an MSI controller
-
-  * msi-base is an msi-specifier describing the msi-specifier produced for the
-    first RID matched by the entry.
-
-  * length is a single cell describing how many consecutive RIDs are matched
-    following the rid-base.
-
-  Any RID r in the interval [rid-base, rid-base + length) is associated with
-  the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
-
-- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
-  to an msi-specifier per the msi-map property.
-
-- msi-parent: Describes the MSI parent of the root complex itself. Where
-  the root complex and MSI controller do not pass sideband data with MSI
-  writes, this property may be used to describe the MSI controller(s)
-  used by PCI devices under the root complex, if defined as such in the
-  binding for the root complex.
-
-
-Example (1)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	msi: msi-controller@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the MSI controller is
-		 * the RID, identity-mapped.
-		 */
-		msi-map = <0x0 &msi_a 0x0 0x10000>,
-	};
-};
-
-
-Example (2)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	msi: msi-controller@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the MSI controller is
-		 * the RID, masked to only the device and function bits.
-		 */
-		msi-map = <0x0 &msi_a 0x0 0x100>,
-		msi-map-mask = <0xff>
-	};
-};
-
-
-Example (3)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	msi: msi-controller@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the MSI controller is
-		 * the RID, but the high bit of the bus number is
-		 * ignored.
-		 */
-		msi-map = <0x0000 &msi 0x0000 0x8000>,
-			  <0x8000 &msi 0x0000 0x8000>;
-	};
-};
-
-
-Example (4)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	msi: msi-controller@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to the MSI controller is
-		 * the RID, but the high bit of the bus number is
-		 * negated.
-		 */
-		msi-map = <0x0000 &msi 0x8000 0x8000>,
-			  <0x8000 &msi 0x0000 0x8000>;
-	};
-};
-
-
-Example (5)
-===========
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	msi_a: msi-controller@a {
-		reg = <0xa 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	msi_b: msi-controller@b {
-		reg = <0xb 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	msi_c: msi-controller@c {
-		reg = <0xc 0x1>;
-		compatible = "vendor,some-controller";
-		msi-controller;
-		#msi-cells = <1>;
-	};
-
-	pci: pci@f {
-		reg = <0xf 0x1>;
-		compatible = "vendor,pcie-root-complex";
-		device_type = "pci";
-
-		/*
-		 * The sideband data provided to MSI controller a is the
-		 * RID, but the high bit of the bus number is negated.
-		 * The sideband data provided to MSI controller b is the
-		 * RID, identity-mapped.
-		 * MSI controller c is not addressable.
-		 */
-		msi-map = <0x0000 &msi_a 0x8000 0x08000>,
-			  <0x8000 &msi_a 0x0000 0x08000>,
-			  <0x0000 &msi_b 0x0000 0x10000>;
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/pci.txt
deleted file mode 100644
index 6a8f2874a24d..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/pci.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-PCI bus bridges have standardized Device Tree bindings:
-
-PCI Bus Binding to: IEEE Std 1275-1994
-https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
-
-And for the interrupt mapping part:
-
-Open Firmware Recommended Practice: Interrupt Mapping
-https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
-
-Additionally to the properties specified in the above standards a host bridge
-driver implementation may support the following properties:
-
-- linux,pci-domain:
-   If present this property assigns a fixed PCI domain number to a host bridge,
-   otherwise an unstable (across boots) unique number will be assigned.
-   It is required to either not set this property at all or set it for all
-   host bridges in the system, otherwise potentially conflicting domain numbers
-   may be assigned to root buses behind different host bridges.  The domain
-   number for each host bridge in the system must be unique.
-- max-link-speed:
-   If present this property specifies PCI gen for link capability.  Host
-   drivers could add this as a strategy to avoid unnecessary operation for
-   unsupported link speed, for instance, trying to do training for
-   unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
-   for gen2, and '1' for gen1. Any other values are invalid.
-- reset-gpios:
-   If present this property specifies PERST# GPIO. Host drivers can parse the
-   GPIO and apply fundamental reset to endpoints.
-- supports-clkreq:
-   If present this property specifies that CLKREQ signal routing exists from
-   root port to downstream device and host bridge drivers can do programming
-   which depends on CLKREQ signal existence. For example, programming root port
-   not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
-
-PCI-PCI Bridge properties
--------------------------
-
-PCIe root ports and switch ports may be described explicitly in the device
-tree, as children of the host bridge node. Even though those devices are
-discoverable by probing, it might be necessary to describe properties that
-aren't provided by standard PCIe capabilities.
-
-Required properties:
-
-- reg:
-   Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994
-   document, it is a five-cell address encoded as (phys.hi phys.mid
-   phys.lo size.hi size.lo). phys.hi should contain the device's BDF as
-   0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero.
-
-   The bus number is defined by firmware, through the standard bridge
-   configuration mechanism. If this port is a switch port, then firmware
-   allocates the bus number and writes it into the Secondary Bus Number
-   register of the bridge directly above this port. Otherwise, the bus
-   number of a root port is the first number in the bus-range property,
-   defaulting to zero.
-
-   If firmware leaves the ARI Forwarding Enable bit set in the bridge
-   above this port, then phys.hi contains the 8-bit function number as
-   0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification
-   recommends that firmware only leaves ARI enabled when it knows that the
-   OS is ARI-aware.
-
-Optional properties:
-
-- external-facing:
-   When present, the port is external-facing. All bridges and endpoints
-   downstream of this port are external to the machine. The OS can, for
-   example, use this information to identify devices that cannot be
-   trusted with relaxed DMA protection, as users could easily attach
-   malicious devices to this port.
-
-Example:
-
-pcie@10000000 {
-	compatible = "pci-host-ecam-generic";
-	...
-	pcie@0008 {
-		/* Root port 00:01.0 is external-facing */
-		reg = <0x00000800 0 0 0 0>;
-		external-facing;
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
index efde49d1bef8..e3fa232da2ca 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
@@ -45,9 +45,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -57,6 +58,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -129,7 +131,8 @@ examples:
                          <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0",
                               "msi1",
                               "msi2",
@@ -137,7 +140,8 @@ examples:
                               "msi4",
                               "msi5",
                               "msi6",
-                              "msi7";
+                              "msi7",
+                              "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 76cb9fbfd476..ff508f592a1a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -54,9 +54,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -66,6 +67,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -149,9 +151,10 @@ examples:
                          <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
index baf1813ec0ac..331fc25d7a17 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml
@@ -49,9 +49,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -61,6 +62,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -136,7 +138,8 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0",
                           "msi1",
                           "msi2",
@@ -144,7 +147,8 @@ examples:
                           "msi4",
                           "msi5",
                           "msi6",
-                          "msi7";
+                          "msi7",
+                          "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
index 9d569644fda9..a604f2a79de3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml
@@ -49,9 +49,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -61,6 +62,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -128,9 +130,10 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
index 4d060bce6f9d..af4dae68d508 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml
@@ -61,9 +61,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -73,6 +74,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -143,9 +145,10 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
index 2a4cc41fc710..dde3079adbb3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml
@@ -51,9 +51,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -63,6 +64,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     maxItems: 1
@@ -132,9 +134,10 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 8f628939209e..0e1808105a81 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -21,6 +21,7 @@ properties:
           - qcom,pcie-apq8064
           - qcom,pcie-apq8084
           - qcom,pcie-ipq4019
+          - qcom,pcie-ipq5018
           - qcom,pcie-ipq6018
           - qcom,pcie-ipq8064
           - qcom,pcie-ipq8064-v2
@@ -168,6 +169,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,pcie-ipq5018
               - qcom,pcie-ipq6018
               - qcom,pcie-ipq8074-gen3
               - qcom,pcie-ipq9574
@@ -175,14 +177,16 @@ allOf:
       properties:
         reg:
           minItems: 5
-          maxItems: 5
+          maxItems: 6
         reg-names:
+          minItems: 5
           items:
             - const: dbi # DesignWare PCIe registers
             - const: elbi # External local bus interface registers
             - const: atu # ATU address space
             - const: parf # Qualcomm specific registers
             - const: config # PCIe configuration space
+            - const: mhi # MHI registers
 
   - if:
       properties:
@@ -322,6 +326,53 @@ allOf:
             - const: ahb # AHB reset
             - const: phy_ahb # PHY AHB reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq5018
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+            - const: axi_bridge # AXI bridge clock
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core sticky reset
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: ahb # AHB reset
+            - const: axi_m_sticky # AXI master sticky reset
+            - const: axi_s_sticky # AXI slave sticky reset
+        interrupts:
+          minItems: 9
+          maxItems: 9
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+            - const: msi4
+            - const: msi5
+            - const: msi6
+            - const: msi7
+            - const: global
+
   - if:
       properties:
         compatible:
@@ -562,6 +613,7 @@ allOf:
               enum:
                 - qcom,pcie-apq8064
                 - qcom,pcie-ipq4019
+                - qcom,pcie-ipq5018
                 - qcom,pcie-ipq8064
                 - qcom,pcie-ipq8064v2
                 - qcom,pcie-ipq8074
@@ -589,7 +641,11 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074
+              - qcom,pcie-ipq8074-gen3
               - qcom,pcie-msm8996
+              - qcom,pcie-msm8998
               - qcom,pcie-sdm845
     then:
       oneOf:
@@ -602,8 +658,9 @@ allOf:
         - properties:
             interrupts:
               minItems: 8
-              maxItems: 8
+              maxItems: 9
             interrupt-names:
+              minItems: 8
               items:
                 - const: msi0
                 - const: msi1
@@ -613,6 +670,7 @@ allOf:
                 - const: msi5
                 - const: msi6
                 - const: msi7
+                - const: global
 
   - if:
       properties:
@@ -622,11 +680,8 @@ allOf:
               - qcom,pcie-apq8064
               - qcom,pcie-apq8084
               - qcom,pcie-ipq4019
-              - qcom,pcie-ipq6018
               - qcom,pcie-ipq8064
               - qcom,pcie-ipq8064-v2
-              - qcom,pcie-ipq8074
-              - qcom,pcie-ipq8074-gen3
               - qcom,pcie-qcs404
     then:
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
index 32a3b7665ff5..6b91581c30ae 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -73,21 +73,21 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a774c0-sysc.h>
 
-     pcie0_ep: pcie-ep@fe000000 {
-            compatible = "renesas,r8a774c0-pcie-ep",
-                         "renesas,rcar-gen3-pcie-ep";
-            reg = <0xfe000000 0x80000>,
-                  <0xfe100000 0x100000>,
-                  <0xfe200000 0x200000>,
-                  <0x30000000 0x8000000>,
-                  <0x38000000 0x8000000>;
-            reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
-            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-            resets = <&cpg 319>;
-            power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
-            clocks = <&cpg CPG_MOD 319>;
-            clock-names = "pcie";
-            max-functions = /bits/ 8 <1>;
+    pcie0_ep: pcie-ep@fe000000 {
+        compatible = "renesas,r8a774c0-pcie-ep",
+                     "renesas,rcar-gen3-pcie-ep";
+        reg = <0xfe000000 0x80000>,
+              <0xfe100000 0x100000>,
+              <0xfe200000 0x200000>,
+              <0x30000000 0x8000000>,
+              <0x38000000 0x8000000>;
+        reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&cpg 319>;
+        power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 319>;
+        clock-names = "pcie";
+        max-functions = /bits/ 8 <1>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 666f013e3af8..7896576920aa 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -113,27 +113,27 @@ examples:
         pcie: pcie@fe000000 {
             compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
             reg = <0 0xfe000000 0 0x80000>;
-             #address-cells = <3>;
-             #size-cells = <2>;
-             bus-range = <0x00 0xff>;
-             device_type = "pci";
-             ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
-                      <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
-                      <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
-                      <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-             dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
-                          <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
-             interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-                          <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-                          <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-             #interrupt-cells = <1>;
-             interrupt-map-mask = <0 0 0 0>;
-             interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-             clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
-             clock-names = "pcie", "pcie_bus";
-             power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-             resets = <&cpg 319>;
-             vpcie3v3-supply = <&pcie_3v3>;
-             vpcie12v-supply = <&pcie_12v>;
-         };
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+                     <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+                     <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+                     <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+            dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
+                         <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+            clock-names = "pcie", "pcie_bus";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 319>;
+            vpcie3v3-supply = <&pcie_3v3>;
+            vpcie12v-supply = <&pcie_12v>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
index cc9adfc7611c..fde9b87508b3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
@@ -65,7 +65,11 @@ properties:
           tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
           nf_err_rx, f_err_rx, radm_qoverflow
       - description:
-          eDMA write channel 0 interrupt
+          If the matching interrupt name is "msi", then this is the combined
+          MSI line interrupt, which is to support MSI interrupts output to GIC
+          controller via GIC SPI interrupt instead of GIC ITS interrupt.
+          If the matching interrupt name is "dma0", then this is the eDMA write
+          channel 0 interrupt.
       - description:
           eDMA write channel 1 interrupt
       - description:
@@ -81,7 +85,9 @@ properties:
       - const: msg
       - const: legacy
       - const: err
-      - const: dma0
+      - enum:
+          - msi
+          - dma0
       - const: dma1
       - const: dma2
       - const: dma3
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 550d8a684af3..6c6d828ce964 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -16,16 +16,14 @@ description: |+
   PCIe IP and thus inherits all the common properties defined in
   snps,dw-pcie.yaml.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-  - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: rockchip,rk3568-pcie
       - items:
           - enum:
+              - rockchip,rk3562-pcie
+              - rockchip,rk3576-pcie
               - rockchip,rk3588-pcie
           - const: rockchip,rk3568-pcie
 
@@ -71,8 +69,58 @@ properties:
 
   vpcie3v3-supply: true
 
-required:
-  - msi-map
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - rockchip,rk3562-pcie
+                - rockchip,rk3576-pcie
+    then:
+      required:
+        - msi-map
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3562-pcie
+              - rockchip,rk3576-pcie
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+        interrupt-names:
+          items:
+            - const: sys
+            - const: pmc
+            - const: msg
+            - const: legacy
+            - const: err
+            - const: msi
+    else:
+      properties:
+        interrupts:
+          minItems: 5
+        interrupt-names:
+          minItems: 5
+          items:
+            - const: sys
+            - const: pmc
+            - const: msg
+            - const: legacy
+            - const: err
+            - const: dma0
+            - const: dma1
+            - const: dma2
+            - const: dma3
+
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
index 844fc7142302..d35ff807936b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -81,10 +81,10 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/sifive-fu740-prci.h>
     bus {
         #address-cells = <2>;
         #size-cells = <2>;
-        #include <dt-bindings/clock/sifive-fu740-prci.h>
 
         pcie@e00000000 {
             compatible = "sifive,fu740-pcie";
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
index dc05761c5cf9..34594972d8db 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -115,7 +115,7 @@ properties:
             above for new bindings.
           oneOf:
             - description: See native 'dbi' clock for details
-              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+              enum: [ pcie, pcie_apb_sys, aclk_dbi, reg ]
             - description: See native 'mstr/slv' clock for details
               enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
             - description: See native 'pipe' clock for details
@@ -201,6 +201,7 @@ properties:
           oneOf:
             - pattern: '^pcie(-?phy[0-9]*)?$'
             - pattern: '^p2u-[0-7]$'
+            - pattern: '^cp[01]-pcie[0-2]-x[124](-lane[0-3])?-phy$'  # marvell,armada8k-pcie
 
   reset-gpio:
     deprecated: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 1117a86fb6f7..69e82f438f58 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -105,6 +105,8 @@ properties:
             Vendor-specific CSR names. Consider using the generic names above
             for new bindings.
           oneOf:
+            - description: See native 'dbi' CSR region for details.
+              enum: [ ctrl ]
             - description: See native 'elbi/app' CSR region for details.
               enum: [ apb, mgmt, link, ulreg, appl ]
             - description: See native 'atu' CSR region for details.
@@ -117,7 +119,7 @@ properties:
               const: slcr
     allOf:
       - contains:
-          const: dbi
+          enum: [ dbi, ctrl ]
       - contains:
           const: config
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml
new file mode 100644
index 000000000000..38cac88f17bf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/v3,v360epc-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: V3 Semiconductor V360 EPC PCI bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This bridge is found in the ARM Integrator/AP (Application Platform)
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,integrator-ap-pci
+      - const: v3,v360epc-pci
+
+  reg:
+    items:
+      - description: V3 host bridge controller
+      - description: Configuration space
+
+  clocks:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 2
+    description:
+      The inbound ranges must be aligned to a 1MB boundary, and may be 1MB, 2MB,
+      4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The
+      memory should be marked as pre-fetchable.
+
+  interrupts:
+    description: Bus Error IRQ
+    maxItems: 1
+
+  ranges:
+    description:
+      The non-prefetchable and prefetchable memory windows must each be exactly
+      256MB (0x10000000) in size. The prefetchable memory window must be
+      immediately adjacent to the non-prefetchable memory window.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@62000000 {
+        compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+        #interrupt-cells = <1>;
+        #size-cells = <2>;
+        #address-cells = <3>;
+        reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+        device_type = "pci";
+        interrupt-parent = <&pic>;
+        interrupts = <17>; /* Bus error IRQ */
+        clocks = <&pciclk>;
+        ranges = <0x01000000 0 0x00000000 0x60000000 0 0x01000000>,     /* 16 MiB @ LB 60000000 */
+                 <0x02000000 0 0x40000000 0x40000000 0 0x10000000>,     /* 256 MiB @ LB 40000000 1:1 */
+                 <0x42000000 0 0x50000000 0x50000000 0 0x10000000>;     /* 256 MiB @ LB 50000000 1:1 */
+        dma-ranges = <0x02000000 0 0x20000000 0x20000000 0 0x20000000>, /* EBI: 512 MB @ LB 20000000 1:1 */
+                     <0x02000000 0 0x80000000 0x80000000 0 0x40000000>; /* CM alias: 1GB @ LB 80000000 */
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map =
+            /* IDSEL 9 */
+            <0x4800 0 0 1 &pic 13>, /* INT A on slot 9 is irq 13 */
+            <0x4800 0 0 2 &pic 14>, /* INT B on slot 9 is irq 14 */
+            <0x4800 0 0 3 &pic 15>, /* INT C on slot 9 is irq 15 */
+            <0x4800 0 0 4 &pic 16>, /* INT D on slot 9 is irq 16 */
+            /* IDSEL 10 */
+            <0x5000 0 0 1 &pic 14>, /* INT A on slot 10 is irq 14 */
+            <0x5000 0 0 2 &pic 15>, /* INT B on slot 10 is irq 15 */
+            <0x5000 0 0 3 &pic 16>, /* INT C on slot 10 is irq 16 */
+            <0x5000 0 0 4 &pic 13>, /* INT D on slot 10 is irq 13 */
+            /* IDSEL 11 */
+            <0x5800 0 0 1 &pic 15>, /* INT A on slot 11 is irq 15 */
+            <0x5800 0 0 2 &pic 16>, /* INT B on slot 11 is irq 16 */
+            <0x5800 0 0 3 &pic 13>, /* INT C on slot 11 is irq 13 */
+            <0x5800 0 0 4 &pic 14>, /* INT D on slot 11 is irq 14 */
+            /* IDSEL 12 */
+            <0x6000 0 0 1 &pic 16>, /* INT A on slot 12 is irq 16 */
+            <0x6000 0 0 2 &pic 13>, /* INT B on slot 12 is irq 13 */
+            <0x6000 0 0 3 &pic 14>, /* INT C on slot 12 is irq 14 */
+            <0x6000 0 0 4 &pic 15>; /* INT D on slot 12 is irq 15 */
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
deleted file mode 100644
index 11063293f761..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-V3 Semiconductor V360 EPC PCI bridge
-
-This bridge is found in the ARM Integrator/AP (Application Platform)
-
-Required properties:
-- compatible: should be one of:
-  "v3,v360epc-pci"
-  "arm,integrator-ap-pci", "v3,v360epc-pci"
-- reg: should contain two register areas:
-  first the base address of the V3 host bridge controller, 64KB
-  second the configuration area register space, 16MB
-- interrupts: should contain a reference to the V3 error interrupt
-  as routed on the system.
-- bus-range: see pci.txt
-- ranges: this follows the standard PCI bindings in the IEEE Std
-  1275-1994 (see pci.txt) with the following restriction:
-  - The non-prefetchable and prefetchable memory windows must
-    each be exactly 256MB (0x10000000) in size.
-  - The prefetchable memory window must be immediately adjacent
-    to the non-prefetcable memory window
-- dma-ranges: three ranges for the inbound memory region. The ranges must
-  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
-  64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
-  as pre-fetchable. Two ranges are supported by the hardware.
-
-Integrator-specific required properties:
-- syscon: should contain a link to the syscon device node, since
-  on the Integrator, some registers in the syscon are required to
-  operate the V3 host bridge.
-
-Example:
-
-pci: pciv3@62000000 {
-	compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-	reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
-	interrupt-parent = <&pic>;
-	interrupts = <17>; /* Bus error IRQ */
-	clocks = <&pciclk>;
-	bus-range = <0x00 0xff>;
-	ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
-		0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
-		0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
-		0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
-		0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
-		0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
-	dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
-		0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
-		0x02000000 0 0x80000000 /* Core module alias memory */
-		0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
-	interrupt-map-mask = <0xf800 0 0 0x7>;
-	interrupt-map = <
-	/* IDSEL 9 */
-	0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-	0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-	0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-	0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
-	/* IDSEL 10 */
-	0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-	0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-	0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-	0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
-	/* IDSEL 11 */
-	0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-	0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-	0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-	0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
-	/* IDSEL 12 */
-	0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-	0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-	0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-	0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
-	>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index d674a24c8ccc..9823456addea 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -76,64 +76,62 @@ unevaluatedProperties: false
 
 examples:
   - |
-
     versal {
-               #address-cells = <2>;
-               #size-cells = <2>;
-               cpm_pcie: pcie@fca10000 {
-                       compatible = "xlnx,versal-cpm-host-1.00";
-                       device_type = "pci";
-                       #address-cells = <3>;
-                       #interrupt-cells = <1>;
-                       #size-cells = <2>;
-                       interrupts = <0 72 4>;
-                       interrupt-parent = <&gic>;
-                       interrupt-map-mask = <0 0 0 7>;
-                       interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
-                                       <0 0 0 2 &pcie_intc_0 1>,
-                                       <0 0 0 3 &pcie_intc_0 2>,
-                                       <0 0 0 4 &pcie_intc_0 3>;
-                       bus-range = <0x00 0xff>;
-                       ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>,
-                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
-                       msi-map = <0x0 &its_gic 0x0 0x10000>;
-                       reg = <0x0 0xfca10000 0x0 0x1000>,
-                             <0x6 0x00000000 0x0 0x10000000>;
-                       reg-names = "cpm_slcr", "cfg";
-                       pcie_intc_0: interrupt-controller {
-                               #address-cells = <0>;
-                               #interrupt-cells = <1>;
-                               interrupt-controller;
-                       };
-               };
-
-               cpm5_pcie: pcie@fcdd0000 {
-                       compatible = "xlnx,versal-cpm5-host";
-                       device_type = "pci";
-                       #address-cells = <3>;
-                       #interrupt-cells = <1>;
-                       #size-cells = <2>;
-                       interrupts = <0 72 4>;
-                       interrupt-parent = <&gic>;
-                       interrupt-map-mask = <0 0 0 7>;
-                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
-                                       <0 0 0 2 &pcie_intc_1 1>,
-                                       <0 0 0 3 &pcie_intc_1 2>,
-                                       <0 0 0 4 &pcie_intc_1 3>;
-                       bus-range = <0x00 0xff>;
-                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
-                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
-                       msi-map = <0x0 &its_gic 0x0 0x10000>;
-                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
-                             <0x06 0x00000000 0x00 0x1000000>,
-                             <0x00 0xfce20000 0x00 0x1000000>;
-                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
-
-                       pcie_intc_1: interrupt-controller {
-                               #address-cells = <0>;
-                               #interrupt-cells = <1>;
-                               interrupt-controller;
-                       };
-               };
-
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@fca10000 {
+            compatible = "xlnx,versal-cpm-host-1.00";
+            device_type = "pci";
+            #address-cells = <3>;
+            #interrupt-cells = <1>;
+            #size-cells = <2>;
+            interrupts = <0 72 4>;
+            interrupt-parent = <&gic>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                            <0 0 0 2 &pcie_intc_0 1>,
+                            <0 0 0 3 &pcie_intc_0 2>,
+                            <0 0 0 4 &pcie_intc_0 3>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>,
+                     <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+            msi-map = <0x0 &its_gic 0x0 0x10000>;
+            reg = <0x0 0xfca10000 0x0 0x1000>,
+                  <0x6 0x00000000 0x0 0x10000000>;
+            reg-names = "cpm_slcr", "cfg";
+            pcie_intc_0: interrupt-controller {
+                    #address-cells = <0>;
+                    #interrupt-cells = <1>;
+                    interrupt-controller;
+            };
+        };
+
+        pcie@fcdd0000 {
+            compatible = "xlnx,versal-cpm5-host";
+            device_type = "pci";
+            #address-cells = <3>;
+            #interrupt-cells = <1>;
+            #size-cells = <2>;
+            interrupts = <0 72 4>;
+            interrupt-parent = <&gic>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                            <0 0 0 2 &pcie_intc_1 1>,
+                            <0 0 0 3 &pcie_intc_1 2>,
+                            <0 0 0 4 &pcie_intc_1 3>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                     <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+            msi-map = <0x0 &its_gic 0x0 0x10000>;
+            reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                  <0x06 0x00000000 0x00 0x1000000>,
+                  <0x00 0xfce20000 0x00 0x1000000>;
+            reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+            pcie_intc_1: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+            };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
index 580fbe37b37f..843d04027c30 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -18,6 +18,7 @@ properties:
       - brcm,bcm4908-usb-phy
       - brcm,bcm7211-usb-phy
       - brcm,bcm7216-usb-phy
+      - brcm,bcm74110-usb-phy
       - brcm,brcmstb-usb-phy
 
   reg:
@@ -139,7 +140,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: brcm,bcm7216-usb-phy
+            enum:
+              - brcm,bcm7216-usb-phy
+              - brcm,bcm74110-usb-phy
     then:
       properties:
         reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index daee0c0fc915..22dd91591a09 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -43,15 +43,15 @@ properties:
   fsl,phy-tx-vref-tune-percent:
     description:
       Tunes the HS DC level relative to the nominal level
-    minimum: 94
+    minimum: 90
     maximum: 124
 
   fsl,phy-tx-rise-tune-percent:
     description:
       Adjusts the rise/fall time duration of the HS waveform relative to
       its nominal value
-    minimum: 97
-    maximum: 103
+    minimum: 90
+    maximum: 120
 
   fsl,phy-tx-preemp-amp-tune-microamp:
     description:
@@ -63,8 +63,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
@@ -112,6 +111,34 @@ allOf:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-usb-phy
+            - fsl,imx8mp-usb-phy
+    then:
+      properties:
+        fsl,phy-tx-vref-tune-percent:
+          minimum: 94
+        fsl,phy-tx-rise-tune-percent:
+          minimum: 97
+          maximum: 103
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      properties:
+        fsl,phy-tx-vref-tune-percent:
+          maximum: 108
+        fsl,phy-comp-dis-tune-percent:
+          minimum: 94
+          maximum: 104
+
   - if:
       required:
         - orientation-switch
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index f6e494d0d89b..acdbce937b0a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -30,6 +30,7 @@ properties:
           - const: mediatek,mt8173-mipi-tx
       - items:
           - enum:
+              - mediatek,mt6893-mipi-tx
               - mediatek,mt8188-mipi-tx
               - mediatek,mt8195-mipi-tx
               - mediatek,mt8365-mipi-tx
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 6be3aa4557e5..b2218c151939 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -78,6 +78,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt2712-tphy
+              - mediatek,mt6893-tphy
               - mediatek,mt7629-tphy
               - mediatek,mt7986-tphy
               - mediatek,mt8183-tphy
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
index a9e3139fd421..0bed847bb4ad 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -49,6 +49,7 @@ properties:
       - enum:
           - mediatek,mt3611-xsphy
           - mediatek,mt3612-xsphy
+          - mediatek,mt7988-xsphy
       - const: mediatek,xsphy
 
   reg:
@@ -150,6 +151,21 @@ patternProperties:
         minimum: 1
         maximum: 31
 
+      mediatek,syscon-type:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description:
+          A phandle to syscon used to access the register of type switch,
+          the field should always be 3 cells long.
+        items:
+          - items:
+              - description:
+                  Phandle to phy type configuration system controller
+              - description:
+                  Phy type configuration register offset
+              - description:
+                  Index of config segment
+                enum: [0, 1, 2, 3]
+
     required:
       - reg
       - clocks
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 15dc8efe6ffe..9af39b33646a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -99,8 +99,7 @@ patternProperties:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
         $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 1
-        maximum: 9
+        enum: [1, 2, 3, 4, 5, 6, 7, 8, 9, 12]
 
       cdns,num-lanes:
         description:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
index 888e6b2aac5a..3e101c3c5ea9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -42,6 +42,9 @@ properties:
       - const: phy
       - const: apb
 
+  phy-supply:
+    description: Single PHY regulator
+
   rockchip,enable-ssc:
     type: boolean
     description:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
deleted file mode 100644
index 960da7fcaa9e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* ROCKCHIP type-c PHY
----------------------
-
-Required properties:
- - compatible : must be "rockchip,rk3399-typec-phy"
- - reg: Address and length of the usb phy control register set
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
- - clocks : phandle + clock specifier for the phy clocks
- - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
- - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
-		    <&cru SCLK_UPHY1_TCPDCORE>;
- - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
- - resets : a list of phandle + reset specifier pairs
- - reset-names : string reset name, must be:
-		 "uphy", "uphy-pipe", "uphy-tcphy"
-
-Optional properties:
- - extcon : extcon specifier for the Power Delivery
-
-Required nodes : a sub-node is required for each port the phy provides.
-		 The sub-node name is used to identify dp or usb3 port,
-		 and shall be the following entries:
-	* "dp-port" : the name of DP port.
-	* "usb3-port" : the name of USB3 port.
-
-Required properties (port (child) node):
-- #phy-cells : must be 0, See ./phy-bindings.txt for details.
-
-Deprecated properties, do not use in new device tree sources, these
-properties are determined by the compatible value:
- - rockchip,typec-conn-dir
- - rockchip,usb3tousb2-en
- - rockchip,external-psm
- - rockchip,pipe-status
-
-Example:
-	tcphy0: phy@ff7c0000 {
-		compatible = "rockchip,rk3399-typec-phy";
-		reg = <0x0 0xff7c0000 0x0 0x40000>;
-		rockchip,grf = <&grf>;
-		extcon = <&fusb0>;
-		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
-			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
-		clock-names = "tcpdcore", "tcpdphy-ref";
-		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
-		assigned-clock-rates = <50000000>;
-		resets = <&cru SRST_UPHY0>,
-			 <&cru SRST_UPHY0_PIPE_L00>,
-			 <&cru SRST_P_UPHY0_TCPHY>;
-		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
-
-		tcphy0_dp: dp-port {
-			#phy-cells = <0>;
-		};
-
-		tcphy0_usb3: usb3-port {
-			#phy-cells = <0>;
-		};
-	};
-
-	tcphy1: phy@ff800000 {
-		compatible = "rockchip,rk3399-typec-phy";
-		reg = <0x0 0xff800000 0x0 0x40000>;
-		rockchip,grf = <&grf>;
-		extcon = <&fusb1>;
-		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
-			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
-		clock-names = "tcpdcore", "tcpdphy-ref";
-		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
-		assigned-clock-rates = <50000000>;
-		resets = <&cru SRST_UPHY1>,
-			 <&cru SRST_UPHY1_PIPE_L00>,
-			 <&cru SRST_P_UPHY1_TCPHY>;
-		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
-
-		tcphy1_dp: dp-port {
-			#phy-cells = <0>;
-		};
-
-		tcphy1_usb3: usb3-port {
-			#phy-cells = <0>;
-		};
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
index b42f1272903d..8b7059d5b182 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -47,6 +47,9 @@ properties:
       - const: pcs_apb
       - const: pma_apb
 
+  phy-supply:
+    description: Single PHY regulator
+
   rockchip,dp-lane-mux:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml
index e39168d55d23..6e9df81441e9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml
@@ -11,26 +11,24 @@ maintainers:
   - Varadarajan Narayanan <quic_varada@quicinc.com>
 
 description:
-  PCIe and USB combo PHY found in Qualcomm IPQ5332 SoC
+  PCIe and USB combo PHY found in Qualcomm IPQ5018 & IPQ5332 SoCs
 
 properties:
   compatible:
     enum:
+      - qcom,ipq5018-uniphy-pcie-phy
       - qcom,ipq5332-uniphy-pcie-phy
 
   reg:
     maxItems: 1
 
   clocks:
-    items:
-      - description: pcie pipe clock
-      - description: pcie ahb clock
+    minItems: 1
+    maxItems: 2
 
   resets:
-    items:
-      - description: phy reset
-      - description: ahb reset
-      - description: cfg reset
+    minItems: 2
+    maxItems: 3
 
   "#phy-cells":
     const: 0
@@ -53,6 +51,41 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-uniphy-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pcie pipe clock
+        resets:
+          items:
+            - description: phy reset
+            - description: cfg reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-uniphy-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pcie pipe clock
+            - description: pcie ahb clock
+        resets:
+          items:
+            - description: phy reset
+            - description: ahb reset
+            - description: cfg reset
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index af275cea3456..2822dce8d9f4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -16,6 +16,7 @@ properties:
           - enum:
               - renesas,usb2-phy-r8a77470  # RZ/G1C
               - renesas,usb2-phy-r9a08g045 # RZ/G3S
+              - renesas,usb2-phy-r9a09g057 # RZ/V2H(P)
 
       - items:
           - enum:
@@ -105,8 +106,13 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,rzg2l-usb2-phy
+            enum:
+              - renesas,usb2-phy-r9a09g057
+              - renesas,rzg2l-usb2-phy
     then:
+      properties:
+        clocks:
+          minItems: 2
       required:
         - resets
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
index 6a7ef556414c..58e735b5dd05 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
@@ -13,12 +13,14 @@ properties:
   compatible:
     enum:
       - rockchip,px30-usb2phy
+      - rockchip,rk3036-usb2phy
       - rockchip,rk3128-usb2phy
       - rockchip,rk3228-usb2phy
       - rockchip,rk3308-usb2phy
       - rockchip,rk3328-usb2phy
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
+      - rockchip,rk3562-usb2phy
       - rockchip,rk3568-usb2phy
       - rockchip,rk3576-usb2phy
       - rockchip,rk3588-usb2phy
@@ -184,12 +186,14 @@ allOf:
           contains:
             enum:
               - rockchip,px30-usb2phy
+              - rockchip,rk3036-usb2phy
               - rockchip,rk3128-usb2phy
               - rockchip,rk3228-usb2phy
               - rockchip,rk3308-usb2phy
               - rockchip,rk3328-usb2phy
               - rockchip,rk3366-usb2phy
               - rockchip,rk3399-usb2phy
+              - rockchip,rk3562-usb2phy
               - rockchip,rk3568-usb2phy
               - rockchip,rk3588-usb2phy
               - rockchip,rv1108-usb2phy
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
index ba67dca5a446..d7de8b527c5c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -46,6 +46,9 @@ properties:
   reset-names:
     const: phy
 
+  phy-supply:
+    description: Single PHY regulator
+
   rockchip,phy-grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle to the syscon managing the phy "general register files"
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml
new file mode 100644
index 000000000000..f46f065e5dbe
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-pcie-phy.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3399-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 PCIE PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie-phy
+
+  '#phy-cells':
+    oneOf:
+      - const: 0
+        deprecated: true
+      - const: 1
+        description: One lane per phy mode
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+required:
+  - compatible
+  - '#phy-cells'
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
new file mode 100644
index 000000000000..91c011f68cd0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3399-typec-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Type-C PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-typec-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tcpdcore
+      - const: tcpdphy-ref
+
+  extcon: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: uphy
+      - const: uphy-pipe
+      - const: uphy-tcphy
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF).
+
+  dp-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#phy-cells':
+        const: 0
+
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Connection to USB Type-C connector
+
+    required:
+      - '#phy-cells'
+
+  usb3-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#phy-cells':
+        const: 0
+
+      orientation-switch: true
+
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Connection to USB Type-C connector SS port
+
+    required:
+      - '#phy-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - dp-port
+  - usb3-port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    phy@ff7c0000 {
+        compatible = "rockchip,rk3399-typec-phy";
+        reg = <0xff7c0000 0x40000>;
+        rockchip,grf = <&grf>;
+        extcon = <&fusb0>;
+        clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+           <&cru SCLK_UPHY0_TCPDPHY_REF>;
+        clock-names = "tcpdcore", "tcpdphy-ref";
+        resets = <&cru SRST_UPHY0>,
+                 <&cru SRST_UPHY0_PIPE_L00>,
+                 <&cru SRST_P_UPHY0_TCPHY>;
+        reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+
+        dp-port {
+            #phy-cells = <0>;
+        };
+
+        usb3-port {
+            #phy-cells = <0>;
+        };
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
deleted file mode 100644
index b496042f1f44..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Rockchip PCIE PHY
------------------------
-
-Required properties:
- - compatible: rockchip,rk3399-pcie-phy
- - clocks: Must contain an entry in clock-names.
-	See ../clocks/clock-bindings.txt for details.
- - clock-names: Must be "refclk"
- - resets: Must contain an entry in reset-names.
-	See ../reset/reset.txt for details.
- - reset-names: Must be "phy"
-
-Required properties for legacy PHY mode (deprecated):
- - #phy-cells: must be 0
-
-Required properties for per-lane PHY mode (preferred):
- - #phy-cells: must be 1
-
-Example:
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	...
-
-	pcie_phy: pcie-phy {
-		compatible = "rockchip,rk3399-pcie-phy";
-		#phy-cells = <0>;
-		clocks = <&cru SCLK_PCIEPHY_REF>;
-		clock-names = "refclk";
-		resets = <&cru SRST_PCIEPHY>;
-		reset-names = "phy";
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml
new file mode 100644
index 000000000000..5e7e1bc2e39a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/samsung,exynos2200-eusb2-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos2200-eusb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos2200 eUSB2 phy controller
+
+maintainers:
+  - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+
+description:
+  Samsung Exynos2200 eUSB2 phy, based on Synopsys eUSB2 IP block, supports
+  LS/FS/HS usb connectivity.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos2200-eusb2-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Reference clock
+      - description: Bus (APB) clock
+      - description: Control clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: bus
+      - const: ctrl
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description:
+      Phandle to eUSB2 to USB 2.0 repeater
+
+  vdd-supply:
+    description:
+      Phandle to 0.88V regulator supply to PHY digital circuit.
+
+  vdda12-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda12-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    usb_hsphy: phy@10ab0000 {
+        compatible = "samsung,exynos2200-eusb2-phy";
+        reg = <0x10ab0000 0x10000>;
+        #phy-cells = <0>;
+
+        clocks = <&cmu_hsi0 7>,
+                 <&cmu_hsi0 5>,
+                 <&cmu_hsi0 8>;
+        clock-names = "ref", "bus", "ctrl";
+
+        vdd-supply = <&vreg_0p88>;
+        vdda12-supply = <&vreg_1p2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
index 27295acbba76..cc60d2f6f70e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
@@ -26,31 +26,41 @@ properties:
   compatible:
     enum:
       - google,gs101-usb31drd-phy
+      - samsung,exynos2200-usb32drd-phy
       - samsung,exynos5250-usbdrd-phy
       - samsung,exynos5420-usbdrd-phy
       - samsung,exynos5433-usbdrd-phy
       - samsung,exynos7-usbdrd-phy
+      - samsung,exynos7870-usbdrd-phy
       - samsung,exynos850-usbdrd-phy
 
   clocks:
-    minItems: 2
+    minItems: 1
     maxItems: 5
 
   clock-names:
-    minItems: 2
+    minItems: 1
     maxItems: 5
     description: |
-      At least two clocks::
+      Typically two clocks:
         - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
           for register access.
         - PHY reference clock (usually crystal clock), used for PHY operations,
           associated by phy name. It is used to determine bit values for clock
           settings register.  For Exynos5420 this is given as 'sclk_usbphy30'
-          in the CMU.
+          in the CMU. It's not needed for Exynos2200.
 
   "#phy-cells":
     const: 1
 
+  phys:
+    maxItems: 1
+    description:
+      USBDRD-underlying high-speed PHY
+
+  phy-names:
+    const: hs
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
@@ -150,6 +160,27 @@ allOf:
         - vdda-usbdp-supply
         - vddh-usbdp-supply
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos2200-usb32drd-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: phy
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+      required:
+        - phys
+        - phy-names
+
   - if:
       properties:
         compatible:
@@ -184,6 +215,7 @@ allOf:
             enum:
               - samsung,exynos5250-usbdrd-phy
               - samsung,exynos5420-usbdrd-phy
+              - samsung,exynos7870-usbdrd-phy
               - samsung,exynos850-usbdrd-phy
     then:
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
index 8eb50cad61d5..a6ef4797e5c5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
@@ -14,7 +14,12 @@ allOf:
 
 properties:
   compatible:
-    const: amlogic,pinctrl-a4
+    oneOf:
+      - const: amlogic,pinctrl-a4
+      - items:
+          - enum:
+              - amlogic,pinctrl-a5
+          - const: amlogic,pinctrl-a4
 
   "#address-cells":
     const: 2
@@ -65,6 +70,7 @@ patternProperties:
     patternProperties:
       "^group-[0-9a-z-]+$":
         type: object
+        unevaluatedProperties: false
         allOf:
           - $ref: /schemas/pinctrl/pincfg-node.yaml
           - $ref: /schemas/pinctrl/pinmux-node.yaml
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml
new file mode 100644
index 000000000000..957918b73a93
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-iomuxc1.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7ulp-iomuxc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP IOMUX Controller
+
+description: |
+  i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
+  ports and IOMUXC DDR for DDR interface.
+
+  Note: This binding doc is only for the IOMUXC1 support in A7 Domain and it
+  only supports generic pin config.
+
+  Please refer to fsl,imx-pinctrl.txt in this directory for common binding
+  part and usage.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-iomuxc1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          Each entry consists of 5 integers which represents the mux
+          and config setting for one pin. The first 4 integers
+          <mux_conf_reg input_reg mux_mode input_val> are specified
+          using a PIN_FUNC_ID macro, which can be found in
+          imx7ulp-pinfunc.h in the device tree source folder.
+          The last integer CONFIG is the pad setting value like
+          pull-up on this pin.
+
+          Please refer to i.MX7ULP Reference Manual for detailed
+          CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_conf_reg" indicates the offset of mux register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_mode" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                CONFIG bits definition:
+                  PAD_CTL_OBE           (1 << 17)
+                  PAD_CTL_IBE           (1 << 16)
+                  PAD_CTL_LK            (1 << 16)
+                  PAD_CTL_DSE_HI        (1 << 6)
+                  PAD_CTL_DSE_STD       (0 << 6)
+                  PAD_CTL_ODE           (1 << 5)
+                  PAD_CTL_PUSH_PULL     (0 << 5)
+                  PAD_CTL_SRE_SLOW      (1 << 2)
+                  PAD_CTL_SRE_STD       (0 << 2)
+                  PAD_CTL_PE            (1 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@40ac0000 {
+        compatible = "fsl,imx7ulp-iomuxc1";
+        reg = <0x40ac0000 0x1000>;
+
+        lpuart4grp {
+            fsl,pins = <
+                0x000c 0x0248 0x4 0x1 0x1
+                0x0008 0x024c 0x4 0x1 0x1
+            >;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
deleted file mode 100644
index bfa3703a7446..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale i.MX7ULP IOMUX Controller
-
-i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
-ports and IOMUXC DDR for DDR interface.
-
-Note:
-This binding doc is only for the IOMUXC1 support in A7 Domain and it only
-supports generic pin config.
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding
-part and usage.
-
-Required properties:
-- compatible:	"fsl,imx7ulp-iomuxc1".
-- fsl,pins:	Each entry consists of 5 integers which represents the mux
-		and config setting for one pin. The first 4 integers
-		<mux_conf_reg input_reg mux_mode input_val> are specified
-		using a PIN_FUNC_ID macro, which can be found in
-		imx7ulp-pinfunc.h in the device tree source folder.
-		The last integer CONFIG is the pad setting value like
-		pull-up on this pin.
-
-		Please refer to i.MX7ULP Reference Manual for detailed
-		CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_OBE		(1 << 17)
-PAD_CTL_IBE		(1 << 16)
-PAD_CTL_LK		(1 << 16)
-PAD_CTL_DSE_HI		(1 << 6)
-PAD_CTL_DSE_STD		(0 << 6)
-PAD_CTL_ODE		(1 << 5)
-PAD_CTL_PUSH_PULL	(0 << 5)
-PAD_CTL_SRE_SLOW	(1 << 2)
-PAD_CTL_SRE_STD		(0 << 2)
-PAD_CTL_PE		(1 << 0)
-
-Examples:
-#include "imx7ulp-pinfunc.h"
-
-/* Pin Controller Node */
-iomuxc1: pinctrl@40ac0000 {
-	compatible = "fsl,imx7ulp-iomuxc1";
-	reg = <0x40ac0000 0x1000>;
-
-	/* Pin Configuration Node */
-	pinctrl_lpuart4: lpuart4grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC3__LPUART4_RX	0x1
-			IMX7ULP_PAD_PTC2__LPUART4_TX	0x1
-		>;
-	};
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml
new file mode 100644
index 000000000000..3e13587df310
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,vf610-iomuxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Vybrid VF610 IOMUX Controller
+
+description:
+  Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+  and usage.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-iomuxc
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          two integers array, represents a group of pins mux and config setting.
+          The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a pin
+          working on a specific function, CONFIG is the pad setting value such
+          as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
+          datasheet for the valid pad config settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description:
+                PIN_FUN_ID refer to vf610-pinfunc.h in device tree source folder
+                for all available PIN_FUNC_ID for Vybrid VF610.
+            - description: |
+                CONFIG bits definition is
+                PAD_CTL_SPEED_LOW               (1 << 12)
+                PAD_CTL_SPEED_MED               (2 << 12)
+                PAD_CTL_SPEED_HIGH              (3 << 12)
+                PAD_CTL_SRE_FAST                (1 << 11)
+                PAD_CTL_SRE_SLOW                (0 << 11)
+                PAD_CTL_ODE                     (1 << 10)
+                PAD_CTL_HYS                     (1 << 9)
+                PAD_CTL_DSE_DISABLE             (0 << 6)
+                PAD_CTL_DSE_150ohm              (1 << 6)
+                PAD_CTL_DSE_75ohm               (2 << 6)
+                PAD_CTL_DSE_50ohm               (3 << 6)
+                PAD_CTL_DSE_37ohm               (4 << 6)
+                PAD_CTL_DSE_30ohm               (5 << 6)
+                PAD_CTL_DSE_25ohm               (6 << 6)
+                PAD_CTL_DSE_20ohm               (7 << 6)
+                PAD_CTL_PUS_100K_DOWN           (0 << 4)
+                PAD_CTL_PUS_47K_UP              (1 << 4)
+                PAD_CTL_PUS_100K_UP             (2 << 4)
+                PAD_CTL_PUS_22K_UP              (3 << 4)
+                PAD_CTL_PKE                     (1 << 3)
+                PAD_CTL_PUE                     (1 << 2)
+                PAD_CTL_OBE_ENABLE              (1 << 1)
+                PAD_CTL_IBE_ENABLE              (1 << 0)
+                PAD_CTL_OBE_IBE_ENABLE          (3 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
deleted file mode 100644
index ddcdeb697c29..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Freescale Vybrid VF610 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,vf610-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
-  a pin working on a specific function, CONFIG is the pad setting value
-  such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
-  datasheet for the valid pad config settings.
-
-CONFIG bits definition:
-PAD_CTL_SPEED_LOW		(1 << 12)
-PAD_CTL_SPEED_MED		(2 << 12)
-PAD_CTL_SPEED_HIGH		(3 << 12)
-PAD_CTL_SRE_FAST		(1 << 11)
-PAD_CTL_SRE_SLOW		(0 << 11)
-PAD_CTL_ODE			(1 << 10)
-PAD_CTL_HYS			(1 << 9)
-PAD_CTL_DSE_DISABLE		(0 << 6)
-PAD_CTL_DSE_150ohm		(1 << 6)
-PAD_CTL_DSE_75ohm		(2 << 6)
-PAD_CTL_DSE_50ohm		(3 << 6)
-PAD_CTL_DSE_37ohm		(4 << 6)
-PAD_CTL_DSE_30ohm		(5 << 6)
-PAD_CTL_DSE_25ohm		(6 << 6)
-PAD_CTL_DSE_20ohm		(7 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_PKE			(1 << 3)
-PAD_CTL_PUE			(1 << 2)
-PAD_CTL_OBE_ENABLE		(1 << 1)
-PAD_CTL_IBE_ENABLE		(1 << 0)
-PAD_CTL_OBE_IBE_ENABLE		(3 << 0)
-
-Please refer to vf610-pinfunc.h in device tree source folder
-for all available PIN_FUNC_ID for Vybrid VF610.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index bccff08a5ba3..b9680b896f12 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -136,75 +136,44 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        syscfg_pctl_a: syscfg-pctl-a@10005000 {
-          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-          reg = <0 0x10005000 0 0x1000>;
-        };
-
-        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
-          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-          reg = <0 0x1020C020 0 0x1000>;
-        };
-
         pinctrl@1c20800 {
-          compatible = "mediatek,mt8135-pinctrl";
-          reg = <0 0x1000B000 0 0x1000>;
-          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
-          gpio-controller;
-          #gpio-cells = <2>;
-          interrupt-controller;
-          #interrupt-cells = <2>;
-          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-
-          i2c0_pins_a: i2c0-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
-                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
-              bias-disable;
-            };
-          };
-
-          i2c1_pins_a: i2c1-pins {
-            pins {
-              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
-                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            compatible = "mediatek,mt8135-pinctrl";
+            reg = <0 0x1000B000 0 0x1000>;
+            mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+            i2c0_pins_a: i2c0-pins {
+                pins1 {
+                    pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                             <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+                    bias-disable;
+                };
             };
-          };
 
-          i2c2_pins_a: i2c2-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
-              bias-pull-down;
+            i2c1_pins_a: i2c1-pins {
+                pins {
+                    pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                             <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
             };
 
-            pins2 {
-              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
-              bias-pull-up;
-            };
-          };
-
-          i2c3_pins_a: i2c3-pins {
-            pins1 {
-              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
-                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-            };
-
-            pins2 {
-              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
-                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
-              output-low;
-              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-            };
+            i2c2_pins_a: i2c2-pins {
+                pins1 {
+                    pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+                    bias-pull-down;
+                };
 
-            pins3 {
-              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
-                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
-              drive-strength = <32>;
+                pins2 {
+                    pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+                    bias-pull-up;
+                };
             };
-          };
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 3bbc00df5548..f4bab7a132d3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -245,9 +245,4 @@ examples:
                 };
             };
         };
-
-        mmc0 {
-           pinctrl-0 = <&mmc0_pins_default>;
-           pinctrl-names = "default";
-        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml
new file mode 100644
index 000000000000..fa189fe00624
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt6893-pinctrl.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6893-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6893 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The MediaTek's MT6893 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6893-pinctrl
+
+  reg:
+    items:
+      - description: pin controller base
+      - description: rm group IO
+      - description: bm group IO
+      - description: lm group IO
+      - description: lb group IO
+      - description: rt group IO
+      - description: lt group IO
+      - description: tm group IO
+      - description: External Interrupt (EINT) controller base
+
+  reg-names:
+    items:
+      - const: base
+      - const: rm
+      - const: bm
+      - const: lm
+      - const: lb
+      - const: rt
+      - const: lt
+      - const: tm
+      - const: eint
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  interrupts:
+    description: The interrupt outputs to sysirq
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux are defined as macros in
+              arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [75000, 5000]
+                description: Pull down RSEL type resistance values (in ohms)
+            description:
+              For normal pull down type there is no need to specify a resistance
+              value, hence this can be specified as a boolean property.
+              For RSEL pull down type a resistance value (in ohms) can be added.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [10000, 5000, 4000, 3000]
+                description: Pull up RSEL type resistance values (in ohms)
+            description:
+              For normal pull up type there is no need to specify a resistance
+              value, hence this can be specified as a boolean property.
+              For RSEL pull up type a resistance value (in ohms) can be added.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt65xx.h>
+    #define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+    #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+    #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt6893-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c20000 0x0200>,
+              <0x11d10000 0x0200>,
+              <0x11e20000 0x0200>,
+              <0x11e70000 0x0200>,
+              <0x11ea0000 0x0200>,
+              <0x11f20000 0x0200>,
+              <0x11f30000 0x0200>,
+              <0x1100b000 0x1000>;
+        reg-names = "base", "rm", "bm", "lm", "lb", "rt",
+                    "lt", "tm", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 220>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        gpio-pins {
+            pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+                bias-pull-up = <4000>;
+                drive-strength = <6>;
+            };
+        };
+
+        i2c0-pins {
+            pins-bus {
+                pinmux = <PINMUX_GPIO99__FUNC_SCL0>,
+                         <PINMUX_GPIO100__FUNC_SDA0>;
+                bias-pull-down = <75000>;
+                drive-strength-microamp = <1000>;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index d74cae9d4d65..9acca85184fa 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -366,34 +366,34 @@ examples:
         #size-cells = <2>;
 
         pio: pinctrl@10211000 {
-          compatible = "mediatek,mt7622-pinctrl";
-          reg = <0 0x10211000 0 0x1000>;
-          gpio-controller;
-          #gpio-cells = <2>;
-
-          pinctrl_eth_default: eth-pins {
-            mux-mdio {
-              groups = "mdc_mdio";
-              function = "eth";
-              drive-strength = <12>;
+            compatible = "mediatek,mt7622-pinctrl";
+            reg = <0 0x10211000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            pinctrl_eth_default: eth-pins {
+                mux-mdio {
+                    groups = "mdc_mdio";
+                    function = "eth";
+                    drive-strength = <12>;
+                };
+
+                mux-gmac2 {
+                    groups = "rgmii_via_gmac2";
+                    function = "eth";
+                    drive-strength = <12>;
+                };
+
+                mux-esw {
+                    groups = "esw";
+                    function = "eth";
+                    drive-strength = <8>;
+                };
+
+                conf-mdio {
+                    pins = "MDC";
+                    bias-pull-up;
+                };
             };
-
-            mux-gmac2 {
-              groups = "rgmii_via_gmac2";
-              function = "eth";
-              drive-strength = <12>;
-            };
-
-            mux-esw {
-              groups = "esw";
-              function = "eth";
-              drive-strength = <8>;
-            };
-
-            conf-mdio {
-              pins = "MDC";
-              bias-pull-up;
-            };
-          };
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index 8507bd15f243..464879274cae 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -195,43 +195,43 @@ examples:
         #size-cells = <2>;
 
         pio: pinctrl@10005000 {
-          compatible = "mediatek,mt8183-pinctrl";
-          reg = <0 0x10005000 0 0x1000>,
-                <0 0x11f20000 0 0x1000>,
-                <0 0x11e80000 0 0x1000>,
-                <0 0x11e70000 0 0x1000>,
-                <0 0x11e90000 0 0x1000>,
-                <0 0x11d30000 0 0x1000>,
-                <0 0x11d20000 0 0x1000>,
-                <0 0x11c50000 0 0x1000>,
-                <0 0x11f30000 0 0x1000>,
-                <0 0x1000b000 0 0x1000>;
-          reg-names = "iocfg0", "iocfg1", "iocfg2",
-                "iocfg3", "iocfg4", "iocfg5",
-                "iocfg6", "iocfg7", "iocfg8",
-                "eint";
-          gpio-controller;
-          #gpio-cells = <2>;
-          gpio-ranges = <&pio 0 0 192>;
-          interrupt-controller;
-          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-          #interrupt-cells = <2>;
-
-          i2c0_pins_a: i2c0-pins {
-            pins1 {
-              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
-                <PINMUX_GPIO49__FUNC_SDA5>;
-              mediatek,pull-up-adv = <3>;
-              drive-strength-microamp = <1000>;
+            compatible = "mediatek,mt8183-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                  <0 0x11f20000 0 0x1000>,
+                  <0 0x11e80000 0 0x1000>,
+                  <0 0x11e70000 0 0x1000>,
+                  <0 0x11e90000 0 0x1000>,
+                  <0 0x11d30000 0 0x1000>,
+                  <0 0x11d20000 0 0x1000>,
+                  <0 0x11c50000 0 0x1000>,
+                  <0 0x11f30000 0 0x1000>,
+                  <0 0x1000b000 0 0x1000>;
+            reg-names = "iocfg0", "iocfg1", "iocfg2",
+                  "iocfg3", "iocfg4", "iocfg5",
+                  "iocfg6", "iocfg7", "iocfg8",
+                  "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 192>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0_pins_a: i2c0-pins {
+                pins1 {
+                  pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                           <PINMUX_GPIO49__FUNC_SDA5>;
+                    mediatek,pull-up-adv = <3>;
+                    drive-strength-microamp = <1000>;
+                };
             };
-          };
 
-          i2c1_pins_a: i2c1-pins {
-            pins {
-              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
-                <PINMUX_GPIO51__FUNC_SDA3>;
-              mediatek,pull-down-adv = <2>;
+            i2c1_pins_a: i2c1-pins {
+                pins {
+                    pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                             <PINMUX_GPIO51__FUNC_SDA3>;
+                    mediatek,pull-down-adv = <2>;
+                };
             };
-          };
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
index 1686427eb854..949dcd6fd847 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
@@ -142,43 +142,43 @@ additionalProperties: false
 
 examples:
   - |
-            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
-            #include <dt-bindings/interrupt-controller/arm-gic.h>
-            pio: pinctrl@10005000 {
-                    compatible = "mediatek,mt8192-pinctrl";
-                    reg = <0x10005000 0x1000>,
-                          <0x11c20000 0x1000>,
-                          <0x11d10000 0x1000>,
-                          <0x11d30000 0x1000>,
-                          <0x11d40000 0x1000>,
-                          <0x11e20000 0x1000>,
-                          <0x11e70000 0x1000>,
-                          <0x11ea0000 0x1000>,
-                          <0x11f20000 0x1000>,
-                          <0x11f30000 0x1000>,
-                          <0x1000b000 0x1000>;
-                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
-                          "iocfg_bl", "iocfg_br", "iocfg_lm",
-                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
-                          "iocfg_tl", "eint";
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    gpio-ranges = <&pio 0 0 220>;
-                    interrupt-controller;
-                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
-                    #interrupt-cells = <2>;
-
-                    spi1-default-pins {
-                            pins-cs-mosi-clk {
-                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
-                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
-                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
-                                    bias-disable;
-                            };
-
-                            pins-miso {
-                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
-                                    bias-pull-down;
-                            };
-                    };
+    #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8192-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c20000 0x1000>,
+              <0x11d10000 0x1000>,
+              <0x11d30000 0x1000>,
+              <0x11d40000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11e70000 0x1000>,
+              <0x11ea0000 0x1000>,
+              <0x11f20000 0x1000>,
+              <0x11f30000 0x1000>,
+              <0x1000b000 0x1000>;
+        reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+              "iocfg_bl", "iocfg_br", "iocfg_lm",
+              "iocfg_lb", "iocfg_rt", "iocfg_lt",
+              "iocfg_tl", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 220>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        spi1-default-pins {
+            pins-cs-mosi-clk {
+                pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                         <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                         <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                bias-disable;
             };
+
+            pins-miso {
+                pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                bias-pull-down;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml
new file mode 100644
index 000000000000..9082bd625e2f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-pinctrl.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8196-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8196 Pin Controller
+
+maintainers:
+  - Lei Xue <lei.xue@mediatek.com>
+  - Cathy Xu <ot_cathy.xu@mediatek.com>
+
+description:
+  The MediaTek's MT8196 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8196-pinctrl
+
+  reg:
+    items:
+      - description: gpio base
+      - description: rt group IO
+      - description: rm1 group IO
+      - description: rm2 group IO
+      - description: rb group IO
+      - description: bm1 group IO
+      - description: bm2 group IO
+      - description: bm3 group IO
+      - description: lt group IO
+      - description: lm1 group IO
+      - description: lm2 group IO
+      - description: lb1 group IO
+      - description: lb2 group IO
+      - description: tm1 group IO
+      - description: tm2 group IO
+      - description: tm3 group IO
+      - description: eint0 group IO
+      - description: eint1 group IO
+      - description: eint2 group IO
+      - description: eint3 group IO
+      - description: eint4 group IO
+
+  reg-names:
+    items:
+      - const: base
+      - const: rt
+      - const: rm1
+      - const: rm2
+      - const: rb
+      - const: bm1
+      - const: bm2
+      - const: bm3
+      - const: lt
+      - const: lm1
+      - const: lm2
+      - const: lb1
+      - const: lb2
+      - const: tm1
+      - const: tm2
+      - const: tm3
+      - const: eint0
+      - const: eint1
+      - const: eint2
+      - const: eint3
+      - const: eint4
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier, should be two. The first cell is the
+      pin number, the second cell is used to specify optional parameters which
+      are defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
+              directly, for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8196 pull down PUPD/R0/R1 type define value.
+              - enum: [75000, 5000]
+                description: mt8196 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8196.
+              For pull down type is PD/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support resistance
+              value(ohm) "75000" & "5000" in mt8196.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8196 pull up PUPD/R0/R1 type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000]
+                description: mt8196 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8196.
+              For pull up type is PU/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support resistance
+              value(ohm) "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
+              "75000" in mt8196.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt65xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+    #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+
+    pio: pinctrl@1002d000 {
+        compatible = "mediatek,mt8196-pinctrl";
+        reg = <0x1002d000 0x1000>,
+              <0x12000000 0x1000>,
+              <0x12020000 0x1000>,
+              <0x12040000 0x1000>,
+              <0x12060000 0x1000>,
+              <0x12820000 0x1000>,
+              <0x12840000 0x1000>,
+              <0x12860000 0x1000>,
+              <0x13000000 0x1000>,
+              <0x13020000 0x1000>,
+              <0x13040000 0x1000>,
+              <0x130f0000 0x1000>,
+              <0x13110000 0x1000>,
+              <0x13800000 0x1000>,
+              <0x13820000 0x1000>,
+              <0x13860000 0x1000>,
+              <0x12080000 0x1000>,
+              <0x12880000 0x1000>,
+              <0x13080000 0x1000>,
+              <0x13880000 0x1000>,
+              <0x1c54a000 0x1000>;
+        reg-names = "base", "rt", "rm1", "rm2", "rb" , "bm1",
+                    "bm2", "bm3", "lt", "lm1", "lm2", "lb1",
+                    "lb2", "tm1", "tm2", "tm3", "eint0", "eint1",
+                    "eint2", "eint3", "eint4";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 271>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO99__FUNC_SCL0>,
+                         <PINMUX_GPIO100__FUNC_SDA0>;
+                bias-disable;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
index 1ce4b5df584a..2791e578c1de 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
@@ -110,7 +110,7 @@ examples:
               <0x03c00000 0x300000>;
         reg-names = "east", "west", "south";
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-        gpio-ranges = <&tlmm 0 0 123>;
+        gpio-ranges = <&tlmm 0 0 124>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
index bb0d7132886a..489b41dcc179 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
@@ -106,7 +106,7 @@ examples:
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
         gpio-controller;
         #gpio-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 133>;
+        gpio-ranges = <&tlmm 0 0 134>;
         interrupt-controller;
         #interrupt-cells = <2>;
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 768bb3c2b456..5156d54b240b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -27,6 +27,7 @@ properties:
               - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
               - renesas,r9a08g045-pinctrl # RZ/G3S
               - renesas,r9a09g047-pinctrl # RZ/G3E
+              - renesas,r9a09g056-pinctrl # RZ/V2N
               - renesas,r9a09g057-pinctrl # RZ/V2H(P)
 
       - items:
@@ -145,6 +146,7 @@ allOf:
           contains:
             enum:
               - renesas,r9a09g047-pinctrl
+              - renesas,r9a09g056-pinctrl
               - renesas,r9a09g057-pinctrl
     then:
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
index 816688580e33..aa882b5bfe97 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -13,9 +13,7 @@ maintainers:
 properties:
   compatible:
     items:
-      - enum:
-          - renesas,r9a06g032-pinctrl # RZ/N1D
-          - renesas,r9a06g033-pinctrl # RZ/N1S
+      - const: renesas,r9a06g032-pinctrl # RZ/N1D
       - const: renesas,rzn1-pinctrl   # Generic RZ/N1
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
index b01ecd83b71b..d80e88aa07b4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
@@ -17,6 +17,19 @@ properties:
     items:
       - description: pinctrl io memory base
 
+  clocks:
+    items:
+      - description: Functional Clock
+      - description: Bus Clock
+
+  clock-names:
+    items:
+      - const: func
+      - const: bus
+
+  resets:
+    maxItems: 1
+
 patternProperties:
   '-cfg$':
     type: object
@@ -94,6 +107,8 @@ patternProperties:
 required:
   - compatible
   - reg
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -108,6 +123,9 @@ examples:
         pinctrl@d401e000 {
             compatible = "spacemit,k1-pinctrl";
             reg = <0x0 0xd401e000 0x0 0x400>;
+            clocks = <&syscon_apbc 42>,
+                     <&syscon_apbc 94>;
+            clock-names = "func", "bus";
 
             uart0_2_cfg: uart0-2-cfg {
                 uart0-2-pins {
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
index b470901f5f56..4dbef86bd958 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
@@ -15,7 +15,7 @@ description: |
   Some peripherals such as PWM have their I/O go through the 4 "GPIOs".
 
 maintainers:
-  - Jianlong Huang <jianlong.huang@starfivetech.com>
+  - Hal Feng <hal.feng@starfivetech.com>
 
 properties:
   compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
index 222b9e240f8a..e2a25a20f6a6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
@@ -18,7 +18,7 @@ description: |
   any GPIO can be set up to be controlled by any of the peripherals.
 
 maintainers:
-  - Jianlong Huang <jianlong.huang@starfivetech.com>
+  - Hal Feng <hal.feng@starfivetech.com>
 
 properties:
   compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pmem/pmem-region.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pmem/pmem-region.txt
deleted file mode 100644
index cd79975e85ec..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pmem/pmem-region.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-tree bindings for persistent memory regions
------------------------------------------------------
-
-Persistent memory refers to a class of memory devices that are:
-
-	a) Usable as main system memory (i.e. cacheable), and
-	b) Retain their contents across power failure.
-
-Given b) it is best to think of persistent memory as a kind of memory mapped
-storage device. To ensure data integrity the operating system needs to manage
-persistent regions separately to the normal memory pool. To aid with that this
-binding provides a standardised interface for discovering where persistent
-memory regions exist inside the physical address space.
-
-Bindings for the region nodes:
------------------------------
-
-Required properties:
-	- compatible = "pmem-region"
-
-	- reg = <base, size>;
-		The reg property should specify an address range that is
-		translatable to a system physical address range. This address
-		range should be mappable as normal system memory would be
-		(i.e cacheable).
-
-		If the reg property contains multiple address ranges
-		each address range will be treated as though it was specified
-		in a separate device node. Having multiple address ranges in a
-		node implies no special relationship between the two ranges.
-
-Optional properties:
-	- Any relevant NUMA associativity properties for the target platform.
-
-	- volatile; This property indicates that this region is actually
-	  backed by non-persistent memory. This lets the OS know that it
-	  may skip the cache flushes required to ensure data is made
-	  persistent after a write.
-
-	  If this property is absent then the OS must assume that the region
-	  is backed by non-volatile memory.
-
-Examples:
---------------------
-
-	/*
-	 * This node specifies one 4KB region spanning from
-	 * 0x5000 to 0x5fff that is backed by non-volatile memory.
-	 */
-	pmem@5000 {
-		compatible = "pmem-region";
-		reg = <0x00005000 0x00001000>;
-	};
-
-	/*
-	 * This node specifies two 4KB regions that are backed by
-	 * volatile (normal) memory.
-	 */
-	pmem@6000 {
-		compatible = "pmem-region";
-		reg = < 0x00006000 0x00001000
-			0x00008000 0x00001000 >;
-		volatile;
-	};
-
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pmem/pmem-region.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pmem/pmem-region.yaml
new file mode 100644
index 000000000000..bd0f0c793f03
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pmem/pmem-region.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pmem-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Oliver O'Halloran <oohall@gmail.com>
+
+title: Persistent Memory Regions
+
+description: |
+  Persistent memory refers to a class of memory devices that are:
+
+    a) Usable as main system memory (i.e. cacheable), and
+    b) Retain their contents across power failure.
+
+  Given b) it is best to think of persistent memory as a kind of memory mapped
+  storage device. To ensure data integrity the operating system needs to manage
+  persistent regions separately to the normal memory pool. To aid with that this
+  binding provides a standardised interface for discovering where persistent
+  memory regions exist inside the physical address space.
+
+properties:
+  compatible:
+    const: pmem-region
+
+  reg:
+    maxItems: 1
+
+  volatile:
+    description:
+      Indicates the region is volatile (non-persistent) and the OS can skip
+      cache flushes for writes
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmem@5000 {
+        compatible = "pmem-region";
+        reg = <0x00005000 0x00001000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/allwinner,sun50i-h6-prcm-ppu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/allwinner,sun50i-h6-prcm-ppu.yaml
new file mode 100644
index 000000000000..73a9b4d6220e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/allwinner,sun50i-h6-prcm-ppu.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/allwinner,sun50i-h6-prcm-ppu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SoCs PRCM power domain controller
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Allwinner Power Reset Clock Management (PRCM) unit contains bits to
+  control a few power domains.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun50i-h6-prcm-ppu
+      - allwinner,sun50i-h616-prcm-ppu
+      - allwinner,sun55i-a523-prcm-ppu
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    prcm_ppu: power-controller@7010210 {
+        compatible = "allwinner,sun50i-h616-prcm-ppu";
+        reg = <0x7010210 0x10>;
+        #power-domain-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index 591a080ca3ff..9c7cc632abee 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -25,6 +25,7 @@ properties:
     enum:
       - mediatek,mt6735-power-controller
       - mediatek,mt6795-power-controller
+      - mediatek,mt6893-power-controller
       - mediatek,mt8167-power-controller
       - mediatek,mt8173-power-controller
       - mediatek,mt8183-power-controller
@@ -88,6 +89,7 @@ $defs:
         description: |
           Power domain index. Valid values are defined in:
               "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
+              "include/dt-bindings/power/mediatek,mt6893-power.h" - for MT6893 type power domain.
               "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
               "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
               "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 655687369a23..1bf65f2a583a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -50,6 +50,7 @@ properties:
           - qcom,sdx55-rpmhpd
           - qcom,sdx65-rpmhpd
           - qcom,sdx75-rpmhpd
+          - qcom,sm4450-rpmhpd
           - qcom,sm6115-rpmpd
           - qcom,sm6125-rpmpd
           - qcom,sm6350-rpmhpd
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index 19d3093e6cd2..ccd555870094 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -21,7 +21,9 @@ description: |+
 
 properties:
   compatible:
-    const: syscon-reboot
+    enum:
+      - syscon-reboot
+      - google,gs101-reboot
 
   mask:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -49,12 +51,6 @@ properties:
   priority:
     default: 192
 
-oneOf:
-  - required:
-      - offset
-  - required:
-      - reg
-
 required:
   - compatible
 
@@ -63,12 +59,29 @@ additionalProperties: false
 allOf:
   - $ref: restart-handler.yaml#
   - if:
-      not:
-        required:
-          - mask
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-reboot
     then:
-      required:
-        - value
+      properties:
+        mask: false
+        offset: false
+        reg: false
+        value: false
+
+    else:
+      if:
+        not:
+          required:
+            - mask
+      then:
+        required:
+          - value
+
+      oneOf:
+        - required: [offset]
+        - required: [reg]
 
 examples:
   - |
@@ -78,3 +91,8 @@ examples:
         offset = <0x0>;
         mask = <0x1>;
     };
+
+  - |
+    reboot {
+        compatible = "google,gs101-reboot";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/reset/toradex,smarc-ec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/reset/toradex,smarc-ec.yaml
new file mode 100644
index 000000000000..ffcd5f2c2bf6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/reset/toradex,smarc-ec.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/toradex,smarc-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toradex Embedded Controller
+
+maintainers:
+  - Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
+  - Francesco Dolcini <francesco.dolcini@toradex.com>
+
+description: |
+  The Toradex Embedded Controller (EC) is used on Toradex SMARC modules,
+  primarily to manage power and reset functionalities.
+
+  The EC provides the following functions:
+    - Reads the SMARC POWER_BTN# and RESET_IN# signals and controls the PMIC accordingly.
+    - Controls the SoC boot mode signals based on the SMARC BOOT_SEL# and FORCE_RECOV# inputs.
+    - Manages the CARRIER_STDBY# signal in response to relevant SoC signals.
+
+  The EC runs a small firmware, factory programmed into its internal flash, and communicates over I2C.
+  It allows software to control power-off and reset functionalities of the module.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - toradex,smarc-imx95-ec
+          - toradex,smarc-imx8mp-ec
+      - const: toradex,smarc-ec
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reset-controller@28 {
+            compatible = "toradex,smarc-imx95-ec", "toradex,smarc-ec";
+            reg = <0x28>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
index ebab98987e49..f494b7710c09 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -40,6 +40,7 @@ properties:
       - rockchip,rk3366-power-controller
       - rockchip,rk3368-power-controller
       - rockchip,rk3399-power-controller
+      - rockchip,rk3562-power-controller
       - rockchip,rk3568-power-controller
       - rockchip,rk3576-power-controller
       - rockchip,rk3588-power-controller
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
index 07adf88997b4..307c99c07721 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -19,6 +19,7 @@ properties:
       - ti,bq24190
       - ti,bq24192
       - ti,bq24192i
+      - ti,bq24193
       - ti,bq24196
       - ti,bq24296
       - ti,bq24297
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml
index b70ce8d7f86c..256adbef55eb 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -87,28 +87,28 @@ unevaluatedProperties: false
 examples:
   - |
     bat: battery {
-      compatible = "simple-battery";
-      constant-charge-current-max-microamp = <4000000>;
-      constant-charge-voltage-max-microvolt = <8400000>;
-      precharge-current-microamp = <160000>;
-      charge-term-current-microamp = <160000>;
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <4000000>;
+        constant-charge-voltage-max-microvolt = <8400000>;
+        precharge-current-microamp = <160000>;
+        charge-term-current-microamp = <160000>;
     };
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      bq25980: charger@65 {
-          compatible = "ti,bq25980";
-          reg = <0x65>;
-          interrupt-parent = <&gpio1>;
-          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timeout-ms = <0>;
-          ti,sc-ocp-limit-microamp = <2000000>;
-          ti,sc-ovp-limit-microvolt = <17800000>;
-          monitored-battery = <&bat>;
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bq25980: charger@65 {
+            compatible = "ti,bq25980";
+            reg = <0x65>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+            ti,watchdog-timeout-ms = <0>;
+            ti,sc-ocp-limit-microamp = <2000000>;
+            ti,sc-ovp-limit-microvolt = <17800000>;
+            monitored-battery = <&bat>;
+        };
     };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
index 741022b4449d..cb04fb25d8ac 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -48,14 +48,14 @@ examples:
     #include <dt-bindings/iio/adc/ingenic,adc.h>
 
     simple_battery: battery {
-            compatible = "simple-battery";
-            voltage-min-design-microvolt = <3600000>;
-            voltage-max-design-microvolt = <4200000>;
+        compatible = "simple-battery";
+        voltage-min-design-microvolt = <3600000>;
+        voltage-max-design-microvolt = <4200000>;
     };
 
     ingenic-battery {
-            compatible = "ingenic,jz4740-battery";
-            io-channels = <&adc INGENIC_ADC_BATTERY>;
-            io-channel-names = "battery";
-            monitored-battery = <&simple_battery>;
+        compatible = "ingenic,jz4740-battery";
+        io-channels = <&adc INGENIC_ADC_BATTERY>;
+        io-channel-names = "battery";
+        monitored-battery = <&simple_battery>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
index 06595a953659..bc7ed7b22085 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -61,13 +61,13 @@ additionalProperties: false
 examples:
   - |
     i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      charger: battery-charger@68 {
-              compatible = "lltc,ltc4162-l";
-              reg = <0x68>;
-              lltc,rsnsb-micro-ohms = <10000>;
-              lltc,rsnsi-micro-ohms = <16000>;
-              lltc,cell-count = <2>;
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger: battery-charger@68 {
+            compatible = "lltc,ltc4162-l";
+            reg = <0x68>;
+            lltc,rsnsb-micro-ohms = <10000>;
+            lltc,rsnsi-micro-ohms = <16000>;
+            lltc,cell-count = <2>;
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/maxim,max77705.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/maxim,max77705.yaml
index bce7fabbd9d3..e3b84068993b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/maxim,max77705.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/maxim,max77705.yaml
@@ -37,8 +37,8 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         charger@69 {
             compatible = "maxim,max77705-charger";
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
new file mode 100644
index 000000000000..2244cc3d45a6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8971.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8971 IC charger
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The MAX8971 is a compact, high-frequency, high-efficiency switch-mode charger
+  for a one-cell lithium-ion (Li+) battery.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8971
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery: true
+
+  port:
+    description:
+      An optional port node to link the extcon device to detect type of plug.
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@35 {
+            compatible = "maxim,max8971";
+            reg = <0x35>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
+
+            monitored-battery = <&battery>;
+
+            port {
+                charger_input: endpoint {
+                    remote-endpoint = <&extcon_output>;
+                };
+            };
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/pegatron,chagall-ec.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/pegatron,chagall-ec.yaml
new file mode 100644
index 000000000000..defb0861e268
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/pegatron,chagall-ec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/pegatron,chagall-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pegatron Chagall EC
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  Pegatron Chagall EC is based on an 8-bit programmable microcontroller from
+  Infineon/Cypress Semiconductor, it communicates over I2C and is used in the
+  Pegatron Chagall tablet for fuel gauge and battery control functions.
+
+$ref: /schemas/power/supply/power-supply.yaml
+
+properties:
+  compatible:
+    const: pegatron,chagall-ec
+
+  reg:
+    maxItems: 1
+
+  monitored-battery: true
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@10 {
+            compatible = "pegatron,chagall-ec";
+            reg = <0x10>;
+
+            monitored-battery = <&battery>;
+            power-supplies = <&mains>;
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
index a0f9d49ff8fb..90c7dc7632c5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
 
 maintainers:
-  - Caleb Connolly <caleb.connolly@linaro.org>
+  - Casey Connolly <casey.connolly@linaro.org>
 
 properties:
   compatible:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
deleted file mode 100644
index 07256b7ffcaa..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Power Management Controller
-
-Properties:
-- compatible: "fsl,<chip>-pmc".
-
-  "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
-  compatible.  "fsl,mpc8313-pmc" should also be listed for any chip
-  whose PMC is compatible, and implies deep-sleep capability.
-
-  "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
-  compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
-  whose PMC is compatible, and implies deep-sleep capability.
-
-  "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
-  compatible; all statements below that apply to "fsl,mpc8548-pmc" also
-  apply to "fsl,mpc8641d-pmc".
-
-  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
-  bit assignments are indicated via the sleep specifier in each device's
-  sleep property.
-
-- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
-  is the PMC block, and the second resource is the Clock Configuration
-  block.
-
-  For devices compatible with "fsl,mpc8548-pmc", the first resource
-  is a 32-byte block beginning with DEVDISR.
-
-- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
-  resource is the PMC block interrupt.
-
-- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
-  this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
-  a wakeup source from deep sleep.
-
-Sleep specifiers:
-
-  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
-  that is set in the cell, the corresponding bit in SCCR will be saved
-  and cleared on suspend, and restored on resume.  This sleep controller
-  supports disabling and resuming devices at any time.
-
-  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
-  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
-  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
-  This sleep controller only supports disabling devices during system
-  sleep, or permanently.
-
-  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
-  first of which will be ORed into DEVDISR (and the second into
-  DEVDISR2, if present -- this cell should be zero or absent if the
-  hardware does not have DEVDISR2) upon a request for permanent device
-  disabling.  This sleep controller does not support configuring devices
-  to disable during system sleep (unless supported by another compatible
-  match), or dynamically.
-
-Example:
-
-	power@b00 {
-		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
-		reg = <0xb00 0x100 0xa00 0x100>;
-		interrupts = <80 8>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml
new file mode 100644
index 000000000000..276ece7f01db
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/powerpc/fsl/pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Management Controller
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description: |
+  The Power Management Controller in several MPC8xxx SoCs helps save power by
+  controlling chip-wide low-power states as well as peripheral clock gating.
+
+  Sleep of peripheral devices is configured by the `sleep` property, for
+  example `sleep = <&pmc 0x00000030>`. Any cells after the &pmc phandle are
+  called a sleep specifier.
+
+  For "fsl,mpc8349-pmc", sleep specifiers consist of one cell.  For each bit that
+  is set in the cell, the corresponding bit in SCCR will be saved and cleared
+  on suspend, and restored on resume.  This sleep controller supports disabling
+  and resuming devices at any time.
+
+  For "fsl,mpc8536-pmc", sleep specifiers consist of three cells, the third of
+  which will be ORed into PMCDR upon suspend, and cleared from PMCDR upon
+  resume.  The first two cells are as described for fsl,mpc8548-pmc.  This
+  sleep controller only supports disabling devices during system sleep, or
+  permanently.
+
+  For "fsl,mpc8548-pmc" or "fsl,mpc8641d-pmc", Sleep specifiers consist of one
+  or two cells, the first of which will be ORed into DEVDISR (and the second
+  into DEVDISR2, if present -- this cell should be zero or absent if the
+  hardware does not have DEVDISR2) upon a request for permanent device
+  disabling.  This sleep controller does not support configuring devices to
+  disable during system sleep (unless supported by another compatible match),
+  or dynamically.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,mpc8315-pmc
+          - const: fsl,mpc8313-pmc
+          - const: fsl,mpc8349-pmc
+
+      - items:
+          - enum:
+              - fsl,mpc8313-pmc
+              - fsl,mpc8323-pmc
+              - fsl,mpc8360-pmc
+              - fsl,mpc8377-pmc
+              - fsl,mpc8378-pmc
+              - fsl,mpc8379-pmc
+          - const: fsl,mpc8349-pmc
+
+      - items:
+          - const: fsl,p1022-pmc
+          - const: fsl,mpc8536-pmc
+          - const: fsl,mpc8548-pmc
+
+      - items:
+          - enum:
+              - fsl,mpc8536-pmc
+              - fsl,mpc8568-pmc
+              - fsl,mpc8569-pmc
+          - const: fsl,mpc8548-pmc
+
+      - enum:
+          - fsl,mpc8548-pmc
+          - fsl,mpc8641d-pmc
+
+    description: |
+      "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+      compatible.  "fsl,mpc8313-pmc" should also be listed for any chip
+      whose PMC is compatible, and implies deep-sleep capability.
+
+      "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+      compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
+      whose PMC is compatible, and implies deep-sleep capability.
+
+      "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+      compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+      apply to "fsl,mpc8641d-pmc".
+
+      Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+      bit assignments are indicated via the sleep specifier in each device's
+      sleep property.
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  fsl,mpc8313-wakeup-timer:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For "fsl,mpc8313-pmc"-compatible devices, this is a phandle to an
+      "fsl,gtm" node on which timer 4 can be used as a wakeup source from deep
+      sleep.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mpc8349-pmc
+    then:
+      properties:
+        reg:
+          items:
+            - description: PMC block
+            - description: Clock Configuration block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,mpc8548-pmc
+              - fsl,mpc8641d-pmc
+    then:
+      properties:
+        reg:
+          items:
+            - description: 32-byte block beginning with DEVDISR
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: power@b00 {
+        compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+        reg = <0xb00 0x100>, <0xa00 0x100>;
+        interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+  - |
+    power@e0070 {
+        compatible = "fsl,mpc8548-pmc";
+        reg = <0xe0070 0x20>;
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
index 45e112d0efb4..5575c58357d6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
@@ -30,11 +30,19 @@ properties:
     const: 3
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: ext
 
 required:
   - reg
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
@@ -43,6 +51,7 @@ examples:
     pwm@44b00000 {
         compatible = "adi,axi-pwmgen-2.00.a";
         reg = <0x44b00000 0x1000>;
-        clocks = <&spi_clk>;
+        clocks = <&fpga_clk>, <&spi_clk>;
+        clock-names = "axi", "ext";
         #pwm-cells = <3>;
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml
new file mode 100644
index 000000000000..5d64fb40a0d6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/loongson,ls7a-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PWM Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description:
+  The Loongson PWM has one pulse width output signal and one pulse input
+  signal to be measured.
+  It can be found on Loongson-2K series cpus and Loongson LS7A bridge chips.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls7a-pwm
+      - items:
+          - enum:
+              - loongson,ls2k0500-pwm
+              - loongson,ls2k1000-pwm
+              - loongson,ls2k2000-pwm
+          - const: loongson,ls7a-pwm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    description:
+      The first cell must have a value of 0, which specifies the PWM output signal;
+      The second cell is the period in nanoseconds;
+      The third cell flag supported by this binding is PWM_POLARITY_INVERTED.
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    pwm@1fe22000 {
+        compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+        reg = <0x1fe22000 0x10>;
+        interrupt-parent = <&liointc0>;
+        interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk LOONGSON2_APB_CLK>;
+        #pwm-cells = <3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
index 195e4371196b..68ef30414325 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -27,6 +27,7 @@ properties:
           - const: mediatek,mt8173-disp-pwm
       - items:
           - enum:
+              - mediatek,mt6893-disp-pwm
               - mediatek,mt8186-disp-pwm
               - mediatek,mt8188-disp-pwm
               - mediatek,mt8192-disp-pwm
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml
new file mode 100644
index 000000000000..1729fe5c3dfb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nxp,mc33xs2410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-side switch MC33XS2410
+
+maintainers:
+  - Dimitri Fedrau <dima.fedrau@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: nxp,mc33xs2410
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  spi-cpha: true
+
+  spi-cs-setup-delay-ns:
+    minimum: 100
+    default: 100
+
+  spi-cs-hold-delay-ns:
+    minimum: 10
+    default: 10
+
+  spi-cs-inactive-delay-ns:
+    minimum: 300
+    default: 300
+
+  reset-gpios:
+    description:
+      GPIO connected to the active low reset pin.
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  pwm-names:
+    items:
+      - const: di0
+      - const: di1
+      - const: di2
+      - const: di3
+
+  pwms:
+    description:
+      Direct inputs(di0-3) are used to directly turn-on or turn-off the
+      outputs.
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The external clock can be used if the internal clock doesn't meet
+      timing requirements over temperature and voltage operating range.
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Logic supply voltage
+
+  vspi-supply:
+    description:
+      Supply voltage for SPI
+
+  vpwr-supply:
+    description:
+      Power switch supply
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+       pwm@0 {
+           compatible = "nxp,mc33xs2410";
+           reg = <0x0>;
+           spi-max-frequency = <4000000>;
+           spi-cpha;
+           spi-cs-setup-delay-ns = <100>;
+           spi-cs-hold-delay-ns = <10>;
+           spi-cs-inactive-delay-ns = <300>;
+           reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+           #pwm-cells = <3>;
+           pwm-names = "di0", "di1", "di2", "di3";
+           pwms = <&pwm0 0 1000000>,
+                  <&pwm1 0 1000000>,
+                  <&pwm2 0 1000000>,
+                  <&pwm3 0 1000000>;
+           interrupt-parent = <&gpio0>;
+           interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+           clocks = <&clk_ext_fixed>;
+           vdd-supply = <&reg_3v3>;
+           vspi-supply = <&reg_3v3>;
+           vpwr-supply = <&reg_24v0>;
+       };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml
new file mode 100644
index 000000000000..13b807765a30
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml
@@ -0,0 +1,378 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/renesas,rzg2l-gpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L General PWM Timer (GPT)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer
+  (GPT32E). It supports the following functions
+  * 32 bits x 8 channels.
+  * Up-counting or down-counting (saw waves) or up/down-counting
+    (triangle waves) for each counter.
+  * Clock sources independently selectable for each channel.
+  * Two I/O pins per channel.
+  * Two output compare/input capture registers per channel.
+  * For the two output compare/input capture registers of each channel,
+    four registers are provided as buffer registers and are capable of
+    operating as comparison registers when buffering is not in use.
+  * In output compare operation, buffer switching can be at crests or
+    troughs, enabling the generation of laterally asymmetric PWM waveforms.
+  * Registers for setting up frame cycles in each channel (with capability
+    for generating interrupts at overflow or underflow)
+  * Generation of dead times in PWM operation.
+  * Synchronous starting, stopping and clearing counters for arbitrary
+    channels.
+  * Starting, stopping, clearing and up/down counters in response to input
+    level comparison.
+  * Starting, clearing, stopping and up/down counters in response to a
+    maximum of four external triggers.
+  * Output pin disable function by dead time error and detected
+    short-circuits between output pins.
+  * A/D converter start triggers can be generated (GPT32E0 to GPT32E3)
+  * Enables the noise filter for input capture and external trigger
+    operation.
+
+  The below pwm channels are supported.
+    pwm0  - GPT32E0.GTIOC0A channel
+    pwm1  - GPT32E0.GTIOC0B channel
+    pwm2  - GPT32E1.GTIOC1A channel
+    pwm3  - GPT32E1.GTIOC1B channel
+    pwm4  - GPT32E2.GTIOC2A channel
+    pwm5  - GPT32E2.GTIOC2B channel
+    pwm6  - GPT32E3.GTIOC3A channel
+    pwm7  - GPT32E3.GTIOC3B channel
+    pwm8  - GPT32E4.GTIOC4A channel
+    pwm9  - GPT32E4.GTIOC4B channel
+    pwm10 - GPT32E5.GTIOC5A channel
+    pwm11 - GPT32E5.GTIOC5B channel
+    pwm12 - GPT32E6.GTIOC6A channel
+    pwm13 - GPT32E6.GTIOC6B channel
+    pwm14 - GPT32E7.GTIOC7A channel
+    pwm15 - GPT32E7.GTIOC7B channel
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-gpt  # RZ/G2{L,LC}
+          - renesas,r9a07g054-gpt  # RZ/V2L
+      - const: renesas,rzg2l-gpt
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 3
+
+  interrupts:
+    items:
+      - description: GPT32E0.GTCCRA input capture/compare match
+      - description: GPT32E0.GTCCRB input capture/compare
+      - description: GPT32E0.GTCCRC compare match
+      - description: GPT32E0.GTCCRD compare match
+      - description: GPT32E0.GTCCRE compare match
+      - description: GPT32E0.GTCCRF compare match
+      - description: GPT32E0.GTADTRA compare match
+      - description: GPT32E0.GTADTRB compare match
+      - description: GPT32E0.GTCNT overflow/GTPR compare match
+      - description: GPT32E0.GTCNT underflow
+      - description: GPT32E1.GTCCRA input capture/compare match
+      - description: GPT32E1.GTCCRB input capture/compare
+      - description: GPT32E1.GTCCRC compare match
+      - description: GPT32E1.GTCCRD compare match
+      - description: GPT32E1.GTCCRE compare match
+      - description: GPT32E1.GTCCRF compare match
+      - description: GPT32E1.GTADTRA compare match
+      - description: GPT32E1.GTADTRB compare match
+      - description: GPT32E1.GTCNT overflow/GTPR compare match
+      - description: GPT32E1.GTCNT underflow
+      - description: GPT32E2.GTCCRA input capture/compare match
+      - description: GPT32E2.GTCCRB input capture/compare
+      - description: GPT32E2.GTCCRC compare match
+      - description: GPT32E2.GTCCRD compare match
+      - description: GPT32E2.GTCCRE compare match
+      - description: GPT32E2.GTCCRF compare match
+      - description: GPT32E2.GTADTRA compare match
+      - description: GPT32E2.GTADTRB compare match
+      - description: GPT32E2.GTCNT overflow/GTPR compare match
+      - description: GPT32E2.GTCNT underflow
+      - description: GPT32E3.GTCCRA input capture/compare match
+      - description: GPT32E3.GTCCRB input capture/compare
+      - description: GPT32E3.GTCCRC compare match
+      - description: GPT32E3.GTCCRD compare match
+      - description: GPT32E3.GTCCRE compare match
+      - description: GPT32E3.GTCCRF compare match
+      - description: GPT32E3.GTADTRA compare match
+      - description: GPT32E3.GTADTRB compare match
+      - description: GPT32E3.GTCNT overflow/GTPR compare match
+      - description: GPT32E3.GTCNT underflow
+      - description: GPT32E4.GTCCRA input capture/compare match
+      - description: GPT32E4.GTCCRB input capture/compare
+      - description: GPT32E4.GTCCRC compare match
+      - description: GPT32E4.GTCCRD compare match
+      - description: GPT32E4.GTCCRE compare match
+      - description: GPT32E4.GTCCRF compare match
+      - description: GPT32E4.GTADTRA compare match
+      - description: GPT32E4.GTADTRB compare match
+      - description: GPT32E4.GTCNT overflow/GTPR compare match
+      - description: GPT32E4.GTCNT underflow
+      - description: GPT32E5.GTCCRA input capture/compare match
+      - description: GPT32E5.GTCCRB input capture/compare
+      - description: GPT32E5.GTCCRC compare match
+      - description: GPT32E5.GTCCRD compare match
+      - description: GPT32E5.GTCCRE compare match
+      - description: GPT32E5.GTCCRF compare match
+      - description: GPT32E5.GTADTRA compare match
+      - description: GPT32E5.GTADTRB compare match
+      - description: GPT32E5.GTCNT overflow/GTPR compare match
+      - description: GPT32E5.GTCNT underflow
+      - description: GPT32E6.GTCCRA input capture/compare match
+      - description: GPT32E6.GTCCRB input capture/compare
+      - description: GPT32E6.GTCCRC compare match
+      - description: GPT32E6.GTCCRD compare match
+      - description: GPT32E6.GTCCRE compare match
+      - description: GPT32E6.GTCCRF compare match
+      - description: GPT32E6.GTADTRA compare match
+      - description: GPT32E6.GTADTRB compare match
+      - description: GPT32E6.GTCNT overflow/GTPR compare match
+      - description: GPT32E6.GTCNT underflow
+      - description: GPT32E7.GTCCRA input capture/compare match
+      - description: GPT32E7.GTCCRB input capture/compare
+      - description: GPT32E7.GTCCRC compare match
+      - description: GPT32E7.GTCCRD compare match
+      - description: GPT32E7.GTCCRE compare match
+      - description: GPT32E7.GTCCRF compare match
+      - description: GPT32E7.GTADTRA compare match
+      - description: GPT32E7.GTADTRB compare match
+      - description: GPT32E7.GTCNT overflow/GTPR compare match
+      - description: GPT32E7.GTCNT underflow
+
+  interrupt-names:
+    items:
+      - const: ccmpa0
+      - const: ccmpb0
+      - const: cmpc0
+      - const: cmpd0
+      - const: cmpe0
+      - const: cmpf0
+      - const: adtrga0
+      - const: adtrgb0
+      - const: ovf0
+      - const: unf0
+      - const: ccmpa1
+      - const: ccmpb1
+      - const: cmpc1
+      - const: cmpd1
+      - const: cmpe1
+      - const: cmpf1
+      - const: adtrga1
+      - const: adtrgb1
+      - const: ovf1
+      - const: unf1
+      - const: ccmpa2
+      - const: ccmpb2
+      - const: cmpc2
+      - const: cmpd2
+      - const: cmpe2
+      - const: cmpf2
+      - const: adtrga2
+      - const: adtrgb2
+      - const: ovf2
+      - const: unf2
+      - const: ccmpa3
+      - const: ccmpb3
+      - const: cmpc3
+      - const: cmpd3
+      - const: cmpe3
+      - const: cmpf3
+      - const: adtrga3
+      - const: adtrgb3
+      - const: ovf3
+      - const: unf3
+      - const: ccmpa4
+      - const: ccmpb4
+      - const: cmpc4
+      - const: cmpd4
+      - const: cmpe4
+      - const: cmpf4
+      - const: adtrga4
+      - const: adtrgb4
+      - const: ovf4
+      - const: unf4
+      - const: ccmpa5
+      - const: ccmpb5
+      - const: cmpc5
+      - const: cmpd5
+      - const: cmpe5
+      - const: cmpf5
+      - const: adtrga5
+      - const: adtrgb5
+      - const: ovf5
+      - const: unf5
+      - const: ccmpa6
+      - const: ccmpb6
+      - const: cmpc6
+      - const: cmpd6
+      - const: cmpe6
+      - const: cmpf6
+      - const: adtrga6
+      - const: adtrgb6
+      - const: ovf6
+      - const: unf6
+      - const: ccmpa7
+      - const: ccmpb7
+      - const: cmpc7
+      - const: cmpd7
+      - const: cmpe7
+      - const: cmpf7
+      - const: adtrga7
+      - const: adtrgb7
+      - const: ovf7
+      - const: unf7
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+
+allOf:
+  - $ref: pwm.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpt: pwm@10048000 {
+        compatible = "renesas,r9a07g044-gpt", "renesas,rzg2l-gpt";
+        reg = <0x10048000 0x800>;
+        interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 221 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 222 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 227 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 259 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 273 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 274 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 275 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0",
+                          "cmpe0", "cmpf0", "adtrga0", "adtrgb0",
+                          "ovf0", "unf0",
+                          "ccmpa1", "ccmpb1", "cmpc1", "cmpd1",
+                          "cmpe1", "cmpf1", "adtrga1", "adtrgb1",
+                          "ovf1", "unf1",
+                          "ccmpa2", "ccmpb2", "cmpc2", "cmpd2",
+                          "cmpe2", "cmpf2", "adtrga2", "adtrgb2",
+                          "ovf2", "unf2",
+                          "ccmpa3", "ccmpb3", "cmpc3", "cmpd3",
+                          "cmpe3", "cmpf3", "adtrga3", "adtrgb3",
+                          "ovf3", "unf3",
+                          "ccmpa4", "ccmpb4", "cmpc4", "cmpd4",
+                          "cmpe4", "cmpf4", "adtrga4", "adtrgb4",
+                          "ovf4", "unf4",
+                          "ccmpa5", "ccmpb5", "cmpc5", "cmpd5",
+                          "cmpe5", "cmpf5", "adtrga5", "adtrgb5",
+                          "ovf5", "unf5",
+                          "ccmpa6", "ccmpb6", "cmpc6", "cmpd6",
+                          "cmpe6", "cmpf6", "adtrga6", "adtrgb6",
+                          "ovf6", "unf6",
+                          "ccmpa7", "ccmpb7", "cmpc7", "cmpd7",
+                          "cmpe7", "cmpf7", "adtrga7", "adtrgb7",
+                          "ovf7", "unf7";
+        clocks = <&cpg CPG_MOD R9A07G044_GPT_PCLK>;
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_GPT_RST_C>;
+        #pwm-cells = <3>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/via,vt8500-pwm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/via,vt8500-pwm.yaml
new file mode 100644
index 000000000000..d9146ad715ba
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/via,vt8500-pwm.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/via,vt8500-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: via,vt8500-pwm
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm1: pwm@d8220000 {
+        compatible = "via,vt8500-pwm";
+        reg = <0xd8220000 0x1000>;
+        #pwm-cells = <3>;
+        clocks = <&clkpwm>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
deleted file mode 100644
index 4fba93ce1985..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
-
-Required properties:
-- compatible: should be "via,vt8500-pwm"
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
-  the cells format. The only third cell flag supported by this binding is
-  PWM_POLARITY_INVERTED.
-- clocks: phandle to the PWM source clock
-
-Example:
-
-pwm1: pwm@d8220000 {
-	#pwm-cells = <3>;
-	compatible = "via,vt8500-pwm";
-	reg = <0xd8220000 0x1000>;
-	clocks = <&clkpwm>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
new file mode 100644
index 000000000000..9c4ead4c9fd1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,adp5055-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5055 Triple Buck Regulator
+
+maintainers:
+  - Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
+
+description: |
+  The ADP5055 combines three high performance buck regulator. The device enables
+  direct connection to high input voltages up to 18 V with no preregulators.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adp5055.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5055
+
+  reg:
+    enum:
+      - 0x70
+      - 0x71
+
+  adi,tset-us:
+    description:
+      Setting time used by the device. This is changed via soldering specific
+      resistor values on the CFG2 pin.
+    enum: [2600, 20800]
+    default: 2600
+
+  adi,ocp-blanking:
+    description:
+      If present, overcurrent protection (OCP) blanking for all regulator is on.
+    type: boolean
+
+  adi,delay-power-good:
+    description:
+      Configures delay timer of the power good (PWRGD) pin. Delay is based on
+      Tset which can be 2.6 ms or 20.8 ms.
+    type: boolean
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^buck[0-2]$':
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control for each regulator. The
+          driver supports two modes of enable, hardware only (GPIOs) or software
+          only (Registers). Pure hardware enabling requires each regulator to
+          contain this property. If at least one regulator does not have this,
+          the driver automatically switches to software only mode.
+
+      adi,dvs-limit-upper-microvolt:
+        description:
+          Configure the allowable upper side limit of the voltage output of each
+          regulator in microvolt. Relative to the default Vref trimming value.
+          Vref = 600 mV. Voltages are in 12 mV steps, value is autoadjusted.
+          Vout_high = Vref_trim + dvs-limit-upper.
+        minimum: 12000
+        maximum: 192000
+        default: 192000
+
+      adi,dvs-limit-lower-microvolt:
+        description:
+          Configure the allowable lower side limit of the voltage output of each
+          regulator in microvolt. Relative to the default Vref trimming value.
+          Vref = 600 mV. Voltages are in 12 mV steps, value is autoadjusted.
+          Vout_low = Vref_trim + dvs-limit-lower.
+        minimum: -190500
+        maximum: -10500
+        default: -190500
+
+      adi,fast-transient:
+        description:
+          Configures the fast transient sensitivity for each regulator.
+          "none"    - No fast transient.
+          "3G_1.5%" - 1.5% window with 3*350uA/V
+          "5G_1.5%" - 1.5% window with 5*350uA/V
+          "5G_2.5%" - 2.5% window with 5*350uA/V
+        enum: [none, 3G_1.5%, 5G_1.5%, 5G_2.5%]
+        default: 5G_2.5%
+
+      adi,mask-power-good:
+        description:
+          If present, masks individual regulators PWRGD signal to the external
+          PWRGD hardware pin.
+        type: boolean
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@70 {
+            compatible = "adi,adp5055";
+            reg = <0x70>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adi,tset-us = <2600>;
+            adi,ocp-blanking;
+            adi,delay-power-good;
+
+            buck0 {
+                regulator-name = "buck0";
+                enable-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+                adi,dvs-limit-upper-microvolt = <192000>;
+                adi,dvs-limit-lower-microvolt = <(-190500)>;
+                adi,fast-transient = "5G_2.5%";
+                adi,mask-power-good;
+            };
+
+            buck1 {
+                regulator-name = "buck1";
+                enable-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+                adi,dvs-limit-upper-microvolt = <192000>;
+                adi,dvs-limit-lower-microvolt = <(-190500)>;
+                adi,fast-transient = "5G_2.5%";
+                adi,mask-power-good;
+            };
+
+            buck2 {
+                regulator-name = "buck2";
+                enable-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+                adi,dvs-limit-upper-microvolt = <192000>;
+                adi,dvs-limit-lower-microvolt = <(-190500)>;
+                adi,fast-transient = "5G_2.5%";
+                adi,mask-power-good;
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml
new file mode 100644
index 000000000000..5b46d7fca05e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/brcm,bcm59054.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM59054 Power Management Unit regulators
+
+description: |
+  This is a part of device tree bindings for the BCM59054 power
+  management unit.
+
+  See Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml for
+  additional information and example.
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+patternProperties:
+  "^(cam|sim|mmc)ldo[1-2]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(rf|sd|sdx|aud|mic|usb|vib|tcx)ldo$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(c|mm|v)sr$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(io|sd)sr[1-2]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^gpldo[1-3]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^lvldo[1-2]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+properties:
+  vbus:
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml
new file mode 100644
index 000000000000..7a5e36394d21
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/brcm,bcm59056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM59056 Power Management Unit regulators
+
+description: |
+  This is a part of device tree bindings for the BCM59056 power
+  management unit.
+
+  See Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml for
+  additional information and example.
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+patternProperties:
+  "^(cam|sim|mmc)ldo[1-2]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(rf|sd|sdx|aud|mic|usb|vib)ldo$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(c|m|v)sr$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^(io|sd)sr[1-2]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  "^gpldo[1-6]$":
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+properties:
+  vbus:
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
index 6327bb2f6ee0..698266c09e25 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -33,7 +33,7 @@ patternProperties:
 
   "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
     type: object
-    $ref: fixed-regulator.yaml#
+    $ref: regulator.yaml#
     unevaluatedProperties: false
     description:
       Properties for single fixed LDO regulator.
@@ -112,7 +112,6 @@ examples:
           regulator-enable-ramp-delay = <220>;
         };
         mt6357_vfe28_reg: ldo-vfe28 {
-          compatible = "regulator-fixed";
           regulator-name = "vfe28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
@@ -125,14 +124,12 @@ examples:
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf18_reg: ldo-vrf18 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <110>;
         };
         mt6357_vrf12_reg: ldo-vrf12 {
-          compatible = "regulator-fixed";
           regulator-name = "vrf12";
           regulator-min-microvolt = <1200000>;
           regulator-max-microvolt = <1200000>;
@@ -157,14 +154,12 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn28_reg: ldo-vcn28 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcn18_reg: ldo-vcn18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcn18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -183,7 +178,6 @@ examples:
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vcamio_reg: ldo-vcamio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vcamio";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
@@ -212,28 +206,24 @@ examples:
           regulator-always-on;
         };
         mt6357_vaux18_reg: ldo-vaux18 {
-          compatible = "regulator-fixed";
           regulator-name = "vaux18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vaud28_reg: ldo-vaud28 {
-          compatible = "regulator-fixed";
           regulator-name = "vaud28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio28_reg: ldo-vio28 {
-          compatible = "regulator-fixed";
           regulator-name = "vio28";
           regulator-min-microvolt = <2800000>;
           regulator-max-microvolt = <2800000>;
           regulator-enable-ramp-delay = <264>;
         };
         mt6357_vio18_reg: ldo-vio18 {
-          compatible = "regulator-fixed";
           regulator-name = "vio18";
           regulator-min-microvolt = <1800000>;
           regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml
new file mode 100644
index 000000000000..671eaf1096d3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96802-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96802 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+  This module is part of the ROHM BD96802 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to buck1 and buck2.
+
+patternProperties:
+  "^buck[1-2]$":
+    type: object
+    description:
+      Properties for single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 500000
+        maximum: 3300000
+
+      rohm,keep-on-stby:
+        description:
+          Keep the regulator powered when PMIC transitions to STBY state.
+        type: boolean
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
index 3d9b400b793c..ef35389cdf17 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -16,6 +16,9 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sc8180x-adsp-pas
+      - qcom,sc8180x-cdsp-pas
+      - qcom,sc8180x-slpi-pas
       - qcom,sm8150-adsp-pas
       - qcom,sm8150-cdsp-pas
       - qcom,sm8150-mpss-pas
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
index 2c31504b0314..2759e7e19162 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -15,16 +15,20 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sar2130p-adsp-pas
-      - qcom,sm8350-adsp-pas
-      - qcom,sm8350-cdsp-pas
-      - qcom,sm8350-slpi-pas
-      - qcom,sm8350-mpss-pas
-      - qcom,sm8450-adsp-pas
-      - qcom,sm8450-cdsp-pas
-      - qcom,sm8450-mpss-pas
-      - qcom,sm8450-slpi-pas
+    oneOf:
+      - enum:
+          - qcom,sar2130p-adsp-pas
+          - qcom,sm8350-adsp-pas
+          - qcom,sm8350-cdsp-pas
+          - qcom,sm8350-slpi-pas
+          - qcom,sm8350-mpss-pas
+          - qcom,sm8450-adsp-pas
+          - qcom,sm8450-cdsp-pas
+          - qcom,sm8450-mpss-pas
+          - qcom,sm8450-slpi-pas
+      - items:
+          - const: qcom,sc8280xp-slpi-pas
+          - const: qcom,sm8350-slpi-pas
 
   reg:
     maxItems: 1
@@ -61,14 +65,15 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sar2130p-adsp-pas
-            - qcom,sm8350-adsp-pas
-            - qcom,sm8350-cdsp-pas
-            - qcom,sm8350-slpi-pas
-            - qcom,sm8450-adsp-pas
-            - qcom,sm8450-cdsp-pas
-            - qcom,sm8450-slpi-pas
+          contains:
+            enum:
+              - qcom,sar2130p-adsp-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-cdsp-pas
+              - qcom,sm8450-slpi-pas
     then:
       properties:
         interrupts:
@@ -102,12 +107,13 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sar2130p-adsp-pas
-            - qcom,sm8350-adsp-pas
-            - qcom,sm8350-slpi-pas
-            - qcom,sm8450-adsp-pas
-            - qcom,sm8450-slpi-pas
+          contains:
+            enum:
+              - qcom,sar2130p-adsp-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-slpi-pas
     then:
       properties:
         power-domains:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 370af61d8f28..843679c557e7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -139,6 +139,10 @@ properties:
       If defined, when remoteproc is probed, it loads the default firmware and
       starts the remote processor.
 
+  firmware-name:
+    maxItems: 1
+    description: Default name of the remote processor firmware.
+
 required:
   - compatible
   - reg
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 695ef38a7bb3..150e95c0d9be 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -12,14 +12,20 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
-      - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
-      - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
-      - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
-      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
-      - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
-      - amlogic,t7-reset
+    oneOf:
+      - enum:
+          - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
+          - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
+          - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+          - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+          - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+          - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
+          - amlogic,t7-reset
+      - items:
+          - enum:
+              - amlogic,a4-reset
+              - amlogic,a5-reset
+          - const: amlogic,meson-s4-reset
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
index c3b33bbc7319..84c4801df8d9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
@@ -23,6 +23,9 @@ properties:
               - atmel,sama5d3-rstc
               - microchip,sam9x60-rstc
               - microchip,sama7g5-rstc
+      - items:
+          - const: microchip,sama7d65-rstc
+          - const: microchip,sama7g5-rstc
       - items:
           - const: atmel,sama5d3-rstc
           - const: atmel,at91sam9g45-rstc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
new file mode 100644
index 000000000000..c79f61c2373b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzv2h-usb2phy-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) USB2PHY Port reset Control
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The RZ/V2H(P) USB2PHY Control mainly controls Port reset and power down of the
+  USB2.0 PHY.
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-usb2phy-reset     # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
+
+    reset-controller@15830000 {
+        compatible = "renesas,r9a09g057-usb2phy-reset";
+        reg = <0x15830000 0x10000>;
+        clocks = <&cpg CPG_MOD 0xb6>;
+        resets = <&cpg 0xaf>;
+        power-domains = <&cpg>;
+        #reset-cells = <0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
index 76e1931f0908..1d1b84575960 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml
@@ -11,7 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    const: sophgo,sg2042-reset
+    oneOf:
+      - items:
+          - enum:
+              - sophgo,sg2044-reset
+          - const: sophgo,sg2042-reset
+      - const: sophgo,sg2042-reset
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml
new file mode 100644
index 000000000000..f2e91d0add7a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/thead,th1520-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 SoC Reset Controller
+
+description:
+  The T-HEAD TH1520 reset controller is a hardware block that asserts/deasserts
+  resets for SoC subsystems.
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      rst: reset-controller@ffef528000 {
+        compatible = "thead,th1520-reset";
+        reg = <0xff 0xef528000 0x0 0x1000>;
+        #reset-cells = <1>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
index bcab59e0cc2e..ede6a58ccf53 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -662,6 +662,31 @@ properties:
             Registers in the AX45MP datasheet.
             https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
 
+        # SiFive
+        - const: xsfvqmaccdod
+          description:
+            SiFive Int8 Matrix Multiplication Extensions Specification.
+            See more details in
+            https://www.sifive.com/document-file/sifive-int8-matrix-multiplication-extensions-specification
+
+        - const: xsfvqmaccqoq
+          description:
+            SiFive Int8 Matrix Multiplication Extensions Specification.
+            See more details in
+            https://www.sifive.com/document-file/sifive-int8-matrix-multiplication-extensions-specification
+
+        - const: xsfvfnrclipxfqf
+          description:
+            SiFive FP32-to-int8 Ranged Clip Instructions Extensions Specification.
+            See more details in
+            https://www.sifive.com/document-file/fp32-to-int8-ranged-clip-instructions
+
+        - const: xsfvfwmaccqqq
+          description:
+            SiFive Matrix Multiply Accumulate Instruction Extensions Specification.
+            See more details in
+            https://www.sifive.com/document-file/matrix-multiply-accumulate-instruction
+
         # T-HEAD
         - const: xtheadvector
           description:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
index a14cb10ff3f0..b4c4d7a7d7ad 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/riscv/sophgo.yaml
@@ -35,6 +35,10 @@ properties:
           - enum:
               - milkv,pioneer
           - const: sophgo,sg2042
+      - items:
+          - enum:
+              - sophgo,srd3-10
+          - const: sophgo,sg2044
 
 additionalProperties: true
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rng/rockchip,rk3588-rng.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rng/rockchip,rk3588-rng.yaml
index ca71b400bcae..fcc5be80142d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/rng/rockchip,rk3588-rng.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rng/rockchip,rk3588-rng.yaml
@@ -4,9 +4,9 @@
 $id: http://devicetree.org/schemas/rng/rockchip,rk3588-rng.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip RK3588 TRNG
+title: Rockchip RK3576/RK3588 TRNG
 
-description: True Random Number Generator on Rockchip RK3588 SoC
+description: True Random Number Generator on Rockchip RK3576/RK3588 SoCs
 
 maintainers:
   - Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
@@ -14,6 +14,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - rockchip,rk3576-rng
       - rockchip,rk3588-rng
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
index c8bb2eef442d..7c5b13caa40b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -23,7 +23,9 @@ properties:
           - microchip,sam9x60-rtc
           - microchip,sama7g5-rtc
       - items:
-          - const: microchip,sam9x7-rtc
+          - enum:
+              - microchip,sam9x7-rtc
+              - microchip,sama7d65-rtc
           - const: microchip,sam9x60-rtc
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
index a7f6c1d1a08a..9c9b981fe38b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -22,6 +22,7 @@ properties:
           - enum:
               - microchip,sam9x60-rtt
               - microchip,sam9x7-rtt
+              - microchip,sama7d65-rtt
           - const: atmel,at91sam9260-rtt
       - items:
           - const: microchip,sama7g5-rtt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml
new file mode 100644
index 000000000000..40fd2fa298fe
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,s32g-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2/S32G3 Real Time Clock (RTC)
+
+maintainers:
+  - Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
+  - Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
+
+description:
+  RTC hardware module present on S32G2/S32G3 SoCs is used as a wakeup source.
+  It is not kept alive during system reset and it is not battery-powered.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,s32g2-rtc
+      - items:
+          - const: nxp,s32g3-rtc
+          - const: nxp,s32g2-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ipg clock drives the access to the RTC iomapped registers
+      - description: Clock source for the RTC module. Can be selected between
+          4 different clock sources using an integrated hardware mux.
+          On S32G2/S32G3 SoCs, 'source0' is the SIRC clock (~32KHz) and it is
+          available during standby and runtime. 'source1' is reserved and cannot
+          be used. 'source2' is the FIRC clock and it is only available during
+          runtime providing a better resolution (~48MHz). 'source3' is an external
+          RTC clock source which can be additionally added in hardware.
+
+  clock-names:
+    items:
+      - const: ipg
+      - enum: [ source0, source1, source2, source3 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@40060000 {
+        compatible = "nxp,s32g3-rtc",
+                     "nxp,s32g2-rtc";
+        reg = <0x40060000 0x1000>;
+        interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 54>, <&clks 55>;
+        clock-names = "ipg", "source0";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
index 68ef3208c886..7497dc3ac5b2 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -55,6 +55,12 @@ properties:
     description:
       RTC alarm is not owned by the OS
 
+  qcom,uefi-rtc-info:
+    type: boolean
+    description:
+      RTC offset is stored as a four-byte GPS time offset in a 12-byte UEFI
+      variable 882f8c2b-9646-435f-8de5-f208ff80c1bd-RTCInfo
+
   wakeup-source: true
 
 required:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
index f6e0c613af67..f6fdcc7090b6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
@@ -33,10 +33,14 @@ properties:
       - const: pps
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    const: hclk
+    minItems: 1
+    items:
+      - const: hclk
+      - const: xtal
 
   power-domains:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/8250.yaml
index dc0d52920575..c6bc27709bf7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/8250.yaml
@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 
@@ -135,7 +135,16 @@ properties:
   clock-frequency: true
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: The core function clock
+      - description: An optional bus clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: bus
 
   resets:
     maxItems: 1
@@ -224,6 +233,25 @@ required:
   - reg
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: spacemit,k1-uart
+then:
+  required: [clock-names]
+  properties:
+    clocks:
+      minItems: 2
+    clock-names:
+      minItems: 2
+else:
+  properties:
+    clocks:
+      maxItems: 1
+    clock-names:
+      maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/8250_omap.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 4b78de6b46a2..1859f71297ff 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -64,14 +64,7 @@ properties:
   clock-names:
     const: fclk
 
-  rts-gpios: true
-  cts-gpios: true
-  dtr-gpios: true
-  dsr-gpios: true
-  rng-gpios: true
-  dcd-gpios: true
   rs485-rts-active-high: true
-  rts-gpio: true
   power-domains: true
   clock-frequency: true
   current-speed: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altera_jtaguart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
deleted file mode 100644
index 55a901051e8f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Altera JTAG UART
-
-Required properties:
-- compatible : should be "ALTR,juart-1.0" <DEPRECATED>
-- compatible : should be "altr,juart-1.0"
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altera_uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altera_uart.txt
deleted file mode 100644
index 81bf7ffb1a81..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altera_uart.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Altera UART
-
-Required properties:
-- compatible : should be "ALTR,uart-1.0" <DEPRECATED>
-- compatible : should be "altr,uart-1.0"
-
-Optional properties:
-- clock-frequency : frequency of the clock input to the UART
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml
new file mode 100644
index 000000000000..02e20fa591da
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/altr,juart-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera JTAG UART
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: altr,juart-1.0
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml
new file mode 100644
index 000000000000..72d4972e1e22
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/altr,uart-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera UART
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: altr,uart-1.0
+
+  clock-frequency:
+    description: Frequency of the clock input to the UART.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 0565fb7649c5..d8ad1bb6172d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -56,6 +56,9 @@ properties:
         items:
           - enum:
               - amlogic,a4-uart
+              - amlogic,s6-uart
+              - amlogic,s7-uart
+              - amlogic,s7d-uart
               - amlogic,t7-uart
           - const: amlogic,meson-s4-uart
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arc-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arc-uart.txt
deleted file mode 100644
index 256cc150ca7e..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arc-uart.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards
-
-Required properties:
-- compatible		: "snps,arc-uart"
-- reg			: offset and length of the register set for the device.
-- interrupts		: device interrupt
-- clock-frequency	: the input clock frequency for the UART
-- current-speed		: baud rate for UART
-
-e.g.
-
-arcuart0: serial@c0fc1000 {
-	compatible = "snps,arc-uart";
-	reg = <0xc0fc1000 0x100>;
-	interrupts = <5>;
-	clock-frequency = <80000000>;
-	current-speed = <115200>;
-};
-
-Note: Each port should have an alias correctly numbered in "aliases" node.
-
-e.g.
-aliases {
-	serial0 = &arcuart0;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
deleted file mode 100644
index 128cc6aed001..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ARM MPS2 UART
-
-Required properties:
-- compatible	: Should be "arm,mps2-uart"
-- reg		: Address and length of the register set
-- interrupts	: Reference to the UART RX, TX and overrun interrupts
-
-Required clocking property:
-- clocks	  : The input clock of the UART
-
-
-Examples:
-
-uart0: serial@40004000 {
-	compatible = "arm,mps2-uart";
-	reg = <0x40004000 0x1000>;
-	interrupts = <0 1 12>;
-	clocks = <&sysclk>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.yaml
new file mode 100644
index 000000000000..4a8df078e6f3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm,mps2-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/arm,mps2-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm MPS2 UART
+
+maintainers:
+  - Vladimir Murzin <vladimir.murzin@arm.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: arm,mps2-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+      - description: Overrun interrupt
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@40004000 {
+        compatible = "arm,mps2-uart";
+        reg = <0x40004000 0x1000>;
+        interrupts = <0>, <1>, <12>;
+        clocks = <&sysclk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm,sbsa-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm,sbsa-uart.yaml
new file mode 100644
index 000000000000..68e3fd64b1d8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm,sbsa-uart.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/serial/arm,sbsa-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM SBSA UART
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This UART uses a subset of the PL011 registers and consequently lives in the
+  PL011 driver. It's baudrate and other communication parameters cannot be
+  adjusted at runtime, so it lacks a clock specifier here.
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: arm,sbsa-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  current-speed:
+    description: fixed baud rate set by the firmware
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - current-speed
+
+unevaluatedProperties: false
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
deleted file mode 100644
index 4163e7eb7763..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-* ARM SBSA defined generic UART
-This UART uses a subset of the PL011 registers and consequently lives
-in the PL011 driver. It's baudrate and other communication parameters
-cannot be adjusted at runtime, so it lacks a clock specifier here.
-
-Required properties:
-- compatible: must be "arm,sbsa-uart"
-- reg: exactly one register range
-- interrupts: exactly one interrupt specifier
-- current-speed: the (fixed) baud rate set by the firmware
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
index f466c38518c4..087a8926f8b4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -26,6 +26,7 @@ properties:
           - enum:
               - microchip,sam9x60-usart
               - microchip,sam9x7-usart
+              - microchip,sama7d65-usart
           - const: atmel,at91sam9260-usart
       - items:
           - const: microchip,sam9x60-dbgu
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
deleted file mode 100644
index 07013fa60a48..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible: Should be "cirrus,ep7209-uart".
-- reg: Address and length of the register set for the device.
-- interrupts: Should contain UART TX and RX interrupt.
-- clocks: Should contain UART core clock number.
-- syscon: Phandle to SYSCON node, which contain UART control bits.
-
-Optional properties:
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively.
-
-Note: Each UART port should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-	aliases {
-		serial0 = &uart1;
-	};
-
-	uart1: uart@80000480 {
-		compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
-		reg = <0x80000480 0x80>;
-		interrupts = <12 13>;
-		clocks = <&clks 11>;
-		syscon = <&syscon1>;
-		cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/cirrus,ep7209-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/cirrus,ep7209-uart.yaml
new file mode 100644
index 000000000000..c9976e86872b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/cirrus,ep7209-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/cirrus,ep7209-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: cirrus,ep7209-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: UART TX interrupt
+      - description: UART RX interrupt
+
+  clocks:
+    maxItems: 1
+
+  syscon:
+    description: Phandle to SYSCON node, which contains UART control bits.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - syscon
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serial@80000480 {
+        compatible = "cirrus,ep7209-uart";
+        reg = <0x80000480 0x80>;
+        interrupts = <12>, <13>;
+        clocks = <&clks 11>;
+        syscon = <&syscon1>;
+        cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
new file mode 100644
index 000000000000..720229455330
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/cnxt,cx92755-usart.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/cnxt,cx92755-usart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Conexant Digicolor USART
+
+maintainers:
+  - Baruch Siach <baruch@tkos.co.il>
+
+description: >
+  Note: this binding is only applicable for using the USART peripheral as UART.
+  USART also support synchronous serial protocols like SPI and I2S.
+  Use the binding that matches the wiring of your system.
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: cnxt,cx92755-usart
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@f0000740 {
+        compatible = "cnxt,cx92755-usart";
+        reg = <0xf0000740 0x20>;
+        clocks = <&main_clk>;
+        interrupts = <44>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/digicolor-usart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/digicolor-usart.txt
deleted file mode 100644
index 2d3ede66889d..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/digicolor-usart.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Binding for Conexant Digicolor USART
-
-Note: this binding is only applicable for using the USART peripheral as
-UART. USART also support synchronous serial protocols like SPI and I2S. Use
-the binding that matches the wiring of your system.
-
-Required properties:
-- compatible : should be "cnxt,cx92755-usart".
-- reg: Should contain USART controller registers location and length.
-- interrupts: Should contain a single USART controller interrupt.
-- clocks: Must contain phandles to the USART clock
-  See ../clocks/clock-bindings.txt for details.
-
-Note: Each UART port should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-	aliases {
-		serial0 = &uart0;
-	};
-
-	uart0: uart@f0000740 {
-		compatible = "cnxt,cx92755-usart";
-		reg = <0xf0000740 0x20>;
-		clocks = <&main_clk>;
-		interrupts = <44>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/lantiq,asc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/lantiq,asc.yaml
new file mode 100644
index 000000000000..96e8c79cb047
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/lantiq,asc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/lantiq,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC ASC serial controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+  - Songjun Wu <songjun.wu@linux.intel.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: lantiq,asc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+      - description: Error interrupt
+
+  clocks:
+    items:
+      - description: Frequency clock
+      - description: Gate clock
+
+  clock-names:
+    items:
+      - const: freq
+      - const: asc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    serial@16600000 {
+        compatible = "lantiq,asc";
+        reg = <0x16600000 0x100000>;
+        interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/lantiq_asc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/lantiq_asc.txt
deleted file mode 100644
index 40e81a5818f6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Lantiq SoC ASC serial controller
-
-Required properties:
-- compatible : Should be "lantiq,asc"
-- reg : Address and length of the register set for the device
-- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
-  depends on the interrupt-parent interrupt controller.
-
-Optional properties:
-- clocks: Should contain frequency clock and gate clock
-- clock-names: Should be "freq" and "asc"
-
-Example:
-
-asc0: serial@16600000 {
-	compatible = "lantiq,asc";
-	reg = <0x16600000 0x100000>;
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
-	clock-names = "freq", "asc";
-};
-
-asc1: serial@e100c00 {
-	compatible = "lantiq,asc";
-	reg = <0xE100C00 0x400>;
-	interrupt-parent = <&icu0>;
-	interrupts = <112 113 114>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml
new file mode 100644
index 000000000000..6c7fa3d19369
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/marvell,armada-3700-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada-3700 UART
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+description:
+  Marvell UART is a non standard UART used in some of Marvell EBU SoCs (e.g.
+  Armada-3700).
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-3700-uart
+      - marvell,armada-3700-uart-ext
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      UART reference clock used to derive the baud rate. If absent, only fixed
+      baud rate from the bootloader is supported.
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: UART sum interrupt
+      - description: UART TX interrupt
+      - description: UART RX interrupt
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-3700-uart-ext
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+
+        interrupt-names:
+          items:
+            - const: uart-tx
+            - const: uart-rx
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+
+        interrupt-names:
+          items:
+            - const: uart-sum
+            - const: uart-tx
+            - const: uart-rx
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@12000 {
+        compatible = "marvell,armada-3700-uart";
+        reg = <0x12000 0x18>;
+        clocks = <&uartclk 0>;
+        interrupts =
+            <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+            <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+            <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@12200 {
+        compatible = "marvell,armada-3700-uart-ext";
+        reg = <0x12200 0x30>;
+        clocks = <&uartclk 1>;
+        interrupts =
+            <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+            <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "uart-tx", "uart-rx";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/mediatek,uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
index 1b02f0b197ff..c55d9a0efa19 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -33,6 +33,7 @@ properties:
               - mediatek,mt6779-uart
               - mediatek,mt6795-uart
               - mediatek,mt6797-uart
+              - mediatek,mt6893-uart
               - mediatek,mt7622-uart
               - mediatek,mt7623-uart
               - mediatek,mt7629-uart
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
deleted file mode 100644
index c8dd440e9747..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Microchip Universal Asynchronous Receiver Transmitter (UART)
-
-Required properties:
-- compatible: Should be "microchip,pic32mzda-uart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clocks: Phandle to the clock.
-          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- pinctrl-names: A pinctrl state names "default" must be defined.
-- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
-             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Optional properties:
-- cts-gpios: CTS pin for UART
-
-Example:
-	uart1: serial@1f822000 {
-		compatible = "microchip,pic32mzda-uart";
-		reg = <0x1f822000 0x50>;
-		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
-			<113 IRQ_TYPE_LEVEL_HIGH>,
-			<114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&rootclk PB2CLK>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart1
-				&pinctrl_uart1_cts
-				&pinctrl_uart1_rts>;
-		cts-gpios = <&gpio1 15 0>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml
new file mode 100644
index 000000000000..b176fd5b580e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/microchip,pic32mzda-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 UART
+
+maintainers:
+  - Andrei Pistirica <andrei.pistirica@microchip.com>
+  - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: microchip,pic32mzda-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Fault
+      - description: RX
+      - description: TX
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/microchip,pic32-clock.h>
+
+    serial@1f822000 {
+        compatible = "microchip,pic32mzda-uart";
+        reg = <0x1f822000 0x50>;
+        interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+                    <113 IRQ_TYPE_LEVEL_HIGH>,
+                    <114 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rootclk PB2CLK>;
+        cts-gpios = <&gpio1 15 0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/milbeaut-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
deleted file mode 100644
index 3d2fb1a7ba94..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Socionext Milbeaut UART controller
-
-Required properties:
-- compatible: should be "socionext,milbeaut-usio-uart".
-- reg: offset and length of the register set for the device.
-- interrupts: two interrupts specifier.
-- interrupt-names: should be "rx", "tx".
-- clocks: phandle to the input clock.
-
-Optional properties:
-- auto-flow-control: flow control enable.
-
-Example:
-	usio1: usio_uart@1e700010 {
-		compatible = "socionext,milbeaut-usio-uart";
-		reg = <0x1e700010 0x10>;
-		interrupts = <0 141 0x4>, <0 149 0x4>;
-		interrupt-names = "rx", "tx";
-		clocks = <&clk 2>;
-		auto-flow-control;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/mvebu-uart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/mvebu-uart.txt
deleted file mode 100644
index a062bbca532c..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Marvell UART : Non standard UART used in some of Marvell EBU SoCs
-                 e.g., Armada-3700.
-
-Required properties:
-- compatible:
-    - "marvell,armada-3700-uart" for the standard variant of the UART
-      (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
-      FIFO), called also UART1.
-    - "marvell,armada-3700-uart-ext" for the extended variant of the
-      UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
-      accesses to the FIFO), called also UART2.
-- reg: offset and length of the register set for the device.
-- clocks: UART reference clock used to derive the baudrate. If no clock
-      is provided (possible only with the "marvell,armada-3700-uart"
-      compatible string for backward compatibility), it will only work
-      if the baudrate was initialized by the bootloader and no baudrate
-      change will then be possible. When provided it should be UART1-clk
-      for standard variant of UART and UART2-clk for extended variant
-      of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
-      should not be used and are supported only for backward compatibility.
-- interrupts:
-    - Must contain three elements for the standard variant of the IP
-      (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
-      respectively the UART sum interrupt, the UART TX interrupt and
-      UART RX interrupt. A corresponding interrupt-names property must
-      be defined.
-    - Must contain two elements for the extended variant of the IP
-      (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
-      respectively the UART TX interrupt and the UART RX interrupt. A
-      corresponding interrupt-names property must be defined.
-    - For backward compatibility reasons, a single element interrupts
-      property is also supported for the standard variant of the IP,
-      containing only the UART sum interrupt. This form is deprecated
-      and should no longer be used.
-
-Example:
-	uart0: serial@12000 {
-		compatible = "marvell,armada-3700-uart";
-		reg = <0x12000 0x18>;
-		clocks = <&uartclk 0>;
-		interrupts =
-		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "uart-sum", "uart-tx", "uart-rx";
-	};
-
-	uart1: serial@12200 {
-		compatible = "marvell,armada-3700-uart-ext";
-		reg = <0x12200 0x30>;
-		clocks = <&uartclk 1>;
-		interrupts =
-		<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
-		<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "uart-tx", "uart-rx";
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/nxp,lpc3220-hsuart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/nxp,lpc3220-hsuart.yaml
new file mode 100644
index 000000000000..ffa2ea59f256
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/nxp,lpc3220-hsuart.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nxp,lpc3220-hsuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC High Speed UART
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+  - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc3220-hsuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@40014000 {
+        compatible = "nxp,lpc3220-hsuart";
+        reg = <0x40014000 0x1000>;
+        interrupts = <26 0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
deleted file mode 100644
index 0d439dfc1aa5..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* NXP LPC32xx SoC High Speed UART
-
-Required properties:
-- compatible: Should be "nxp,lpc3220-hsuart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-
-Example:
-
-	uart1: serial@40014000 {
-		compatible = "nxp,lpc3220-hsuart";
-		reg = <0x40014000 0x1000>;
-		interrupts = <26 0>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
new file mode 100644
index 000000000000..ea879db5f485
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,rsci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RSCI Serial Communication Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: renesas,r9a09g077-rsci      # RZ/T2H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Error interrupt
+      - description: Receive buffer full interrupt
+      - description: Transmit buffer empty interrupt
+      - description: Transmit end interrupt
+
+  interrupt-names:
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: tei
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  uart-has-rtscts: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+    aliases {
+        serial0 = &sci0;
+    };
+
+    sci0: serial@80005000 {
+        compatible = "renesas,r9a09g077-rsci";
+        reg = <0x80005000 0x400>;
+        interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD 108>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/snps,arc-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/snps,arc-uart.yaml
new file mode 100644
index 000000000000..dd3096fbfb6a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/snps,arc-uart.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/snps,arc-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys ARC UART
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description:
+  Synopsys ARC UART is a non-standard UART used in some of the ARC FPGA boards.
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: snps,arc-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description: the input clock frequency for the UART
+
+  current-speed:
+    description: baud rate for UART
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-frequency
+  - current-speed
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@c0fc1000 {
+        compatible = "snps,arc-uart";
+        reg = <0xc0fc1000 0x100>;
+        interrupts = <5>;
+        clock-frequency = <80000000>;
+        current-speed = <115200>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 1aa3480d8d81..8f1b7f704c5b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -17,9 +17,7 @@ allOf:
       properties:
         compatible:
           items:
-            - enum:
-                - renesas,r9a06g032-uart
-                - renesas,r9a06g033-uart
+            - {}
             - const: renesas,rzn1-uart
             - const: snps,dw-apb-uart
     then:
@@ -45,15 +43,11 @@ properties:
   compatible:
     oneOf:
       - items:
-          - enum:
-              - renesas,r9a06g032-uart
-              - renesas,r9a06g033-uart
+          - const: renesas,r9a06g032-uart
           - const: renesas,rzn1-uart
           - const: snps,dw-apb-uart
       - items:
-          - enum:
-              - renesas,r9a06g032-uart
-              - renesas,r9a06g033-uart
+          - const: renesas,r9a06g032-uart
           - const: renesas,rzn1-uart
       - items:
           - enum:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
new file mode 100644
index 000000000000..34a997ca2e11
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/serial/socionext,milbeaut-usio-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,milbeaut-usio-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Milbeaut UART controller
+
+maintainers:
+  - Sugaya Taichi <sugaya.taichi@socionext.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: socionext,milbeaut-usio-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RX interrupt specifier
+      - description: TX interrupt specifier
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  auto-flow-control:
+    description: Enable automatic flow control.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@1e700010 {
+        compatible = "socionext,milbeaut-usio-uart";
+        reg = <0x1e700010 0x10>;
+        interrupts = <0 141 0x4>, <0 149 0x4>;
+        interrupt-names = "rx", "tx";
+        clocks = <&clk 2>;
+        auto-flow-control;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
index 77c281153010..39d4637c2d08 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
@@ -22,6 +22,8 @@ properties:
       - amlogic,meson-axg-clk-measure
       - amlogic,meson-g12a-clk-measure
       - amlogic,meson-sm1-clk-measure
+      - amlogic,c3-clk-measure
+      - amlogic,s4-clk-measure
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
index 234089b5954d..b43df10c5ef4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml#
+$id: http://devicetree.org/schemas/soc/fsl/fsl,ls1028a-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Freescale Layerscape Reset Registers Module
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
index de0b4ae740ff..a975bce59975 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -50,7 +50,7 @@ required:
   - compatible
 
 allOf:
-  - $ref: reserved-memory.yaml
+  - $ref: /schemas/reserved-memory/reserved-memory.yaml
 
 unevaluatedProperties: false
 
@@ -61,7 +61,7 @@ examples:
         #size-cells = <2>;
 
         qman-fqd {
-            compatible = "shared-dma-pool";
+            compatible = "fsl,qman-fqd";
             size = <0 0x400000>;
             alignment = <0 0x400000>;
             no-map;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml
new file mode 100644
index 000000000000..2be022ca6a7d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/google/google,gs101-pmu-intr-gen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Power Management Unit (PMU) Interrupt Generation
+
+description: |
+  PMU interrupt generator for handshaking between PMU through interrupts.
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - const: google,gs101-pmu-intr-gen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu_intr_gen: syscon@17470000 {
+      compatible = "google,gs101-pmu-intr-gen", "syscon";
+      reg = <0x17470000 0x10000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
index 1ad5b61b249f..4c96d4917967 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml
@@ -23,6 +23,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - mediatek,mt6893-dvfsrc
           - mediatek,mt8183-dvfsrc
           - mediatek,mt8195-dvfsrc
       - items:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
index b00be9e01206..3e8d99cb4dc3 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
@@ -36,6 +36,13 @@ properties:
       - const: err
       - const: wakeup
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ram
+
   qcom,ipc:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
@@ -46,6 +53,14 @@ properties:
     description:
       Three entries specifying the outgoing ipc bit used for signaling the RPM.
 
+  clock-controller:
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,rpmcc
+
 patternProperties:
   "^regulators(-[01])?$":
     type: object
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
index af632d0e0355..036562eb5140 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -44,7 +44,13 @@ description: |
 
 properties:
   compatible:
-    const: qcom,rpmh-rsc
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-rpmh-apps-rsc
+              - qcom,sdm845-rpmh-apps-rsc
+          - const: qcom,rpmh-rsc
+      - const: qcom,rpmh-rsc
 
   interrupts:
     minItems: 1
@@ -124,7 +130,21 @@ required:
   - qcom,tcs-offset
   - reg
   - reg-names
-  - power-domains
+
+allOf:
+  # Some platforms may lack a OSI-mode PSCI implementation, which implies the
+  # system power domain can't provide feedback about entering power collapse
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sc7180-rpmh-apps-rsc
+                - qcom,sdm845-rpmh-apps-rsc
+    then:
+      required:
+        - power-domains
 
 additionalProperties: false
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
index ca4bce817273..c2f1f5946cfa 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml
@@ -73,9 +73,10 @@ examples:
         #size-cells = <0>;
 
         cpu@0 {
-            compatible = "qcom,kryo";
+            compatible = "arm,cortex-a53";
             device_type = "cpu";
             enable-method = "qcom,kpss-acc-v2";
+            qcom,acc = <&acc0>;
             qcom,saw = <&saw0>;
             reg = <0x0>;
             operating-points-v2 = <&cpu_opp_table>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
index 66bc4b1bf572..8b8f96500434 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -54,7 +54,7 @@ properties:
       - compatible
 
   wifi:
-    additionalProperties: false
+    unevaluatedProperties: false
     type: object
     properties:
       compatible:
@@ -88,6 +88,9 @@ properties:
       - qcom,smem-states
       - qcom,smem-state-names
 
+    allOf:
+      - $ref: /schemas/net/wireless/wireless-controller.yaml#
+
 required:
   - compatible
   - qcom,mmio
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
index e0f7503a9f35..c41dcaea568a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g057-sys.yaml
@@ -25,6 +25,7 @@ properties:
     items:
       - enum:
           - renesas,r9a09g047-sys # RZ/G3E
+          - renesas,r9a09g056-sys # RZ/V2N
           - renesas,r9a09g057-sys # RZ/V2H
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 51a4c48eea6d..5e6e6e6208dc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -375,6 +375,13 @@ properties:
               - renesas,r8a779g3 # ES3.x
           - const: renesas,r8a779g0
 
+      - description: R-Car V4H (R8A779G3)
+        items:
+          - enum:
+              - retronix,sparrow-hawk # Sparrow Hawk board
+          - const: renesas,r8a779g3 # ES3.x
+          - const: renesas,r8a779g0
+
       - description: R-Car V4M (R8A779H0)
         items:
           - enum:
@@ -551,6 +558,21 @@ properties:
               - renesas,r9a09g047e58 # Quad Cortex-A55 + Cortex-M33 + Ethos-U55 (21mm BGA)
           - const: renesas,r9a09g047
 
+      - description: RZ/V2N (R9A09G056)
+        items:
+          - enum:
+              - renesas,rzv2n-evk # RZ/V2N EVK (RTK0EF0186C03000BJ)
+          - enum:
+              - renesas,r9a09g056n41 # RZ/V2N
+              - renesas,r9a09g056n42 # RZ/V2N with Mali-G31 support
+              - renesas,r9a09g056n43 # RZ/V2N with Mali-C55 support
+              - renesas,r9a09g056n44 # RZ/V2N with Mali-G31 + Mali-C55 support
+              - renesas,r9a09g056n45 # RZ/V2N with cryptographic extension support
+              - renesas,r9a09g056n46 # RZ/V2N with Mali-G31 + cryptographic extension support
+              - renesas,r9a09g056n47 # RZ/V2N with Mali-C55 + cryptographic extension support
+              - renesas,r9a09g056n48 # RZ/V2N with Mali-G31 + Mali-C55 + cryptographic extension support
+          - const: renesas,r9a09g056
+
       - description: RZ/V2H(P) (R9A09G057)
         items:
           - enum:
@@ -570,6 +592,16 @@ properties:
           - const: renesas,r9a09g057h48
           - const: renesas,r9a09g057
 
+      - description: RZ/T2H (R9A09G077)
+        items:
+          - enum:
+              - renesas,rzt2h-evk # RZ/T2H Evaluation Board
+          - enum:
+              - renesas,r9a09g077m04 # RZ/T2H with Single Cortex-A55 + Dual Cortex-R52 - no security
+              - renesas,r9a09g077m24 # RZ/T2H with Dual Cortex-A55 + Dual Cortex-R52 - no security
+              - renesas,r9a09g077m44 # RZ/T2H with Quad Cortex-A55 + Dual Cortex-R52 - no security
+          - const: renesas,r9a09g077
+
 additionalProperties: true
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 2f61c1b95fea..ccdcc889ba8e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -18,6 +18,12 @@ properties:
               - rockchip,rk3528-ioc-grf
               - rockchip,rk3528-vo-grf
               - rockchip,rk3528-vpu-grf
+              - rockchip,rk3562-ioc-grf
+              - rockchip,rk3562-peri-grf
+              - rockchip,rk3562-pipephy-grf
+              - rockchip,rk3562-pmu-grf
+              - rockchip,rk3562-sys-grf
+              - rockchip,rk3562-usbphy-grf
               - rockchip,rk3566-pipe-grf
               - rockchip,rk3568-pcie3-phy-grf
               - rockchip,rk3568-pipe-grf
@@ -82,6 +88,7 @@ properties:
               - rockchip,rk3368-pmugrf
               - rockchip,rk3399-grf
               - rockchip,rk3399-pmugrf
+              - rockchip,rk3562-pmu-grf
               - rockchip,rk3568-grf
               - rockchip,rk3568-pmugrf
               - rockchip,rk3576-ioc-grf
@@ -201,8 +208,8 @@ allOf:
 
         pcie-phy:
           type: object
-          description:
-            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+          $ref: /schemas/phy/rockchip,rk3399-pcie-phy.yaml#
+          unevaluatedProperties: false
 
       patternProperties:
         "^phy@[0-9a-f]+$":
@@ -326,6 +333,15 @@ examples:
         #phy-cells = <0>;
       };
 
+      pcie-phy {
+        compatible = "rockchip,rk3399-pcie-phy";
+        #phy-cells = <1>;
+        clocks = <&cru SCLK_PCIEPHY_REF>;
+        clock-names = "refclk";
+        resets = <&cru SRST_PCIEPHY>;
+        reset-names = "phy";
+      };
+
       phy@f780 {
         compatible = "rockchip,rk3399-emmc-phy";
         reg = <0xf780 0x20>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index 204da6fe458d..3109df43d502 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -129,6 +129,11 @@ properties:
     description:
       Node for reboot method
 
+  google,pmu-intr-gen-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU interrupt generation interface.
+
 required:
   - compatible
   - reg
@@ -189,6 +194,16 @@ allOf:
       properties:
         dp-phy: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-pmu
+    then:
+      required:
+        - google,pmu-intr-gen-syscon
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml
new file mode 100644
index 000000000000..5cf186c396c9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-rtc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sophgo/sophgo,cv1800b-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock of the Sophgo CV1800 SoC
+
+description:
+  The RTC (Real Time Clock) is an independently powered module in the chip. It
+  contains a 32KHz oscillator and a Power-On-Reset (POR) sub-module, which can
+  be used for time display and scheduled alarm produce. In addition, the
+  hardware state machine provides triggering and timing control for chip
+  power-on, power-off and reset.
+
+  Furthermore, the 8051 subsystem is located within RTCSYS and is independently
+  powered. System software can use the 8051 to manage wake conditions and wake
+  the system while the system is asleep, and communicate with external devices
+  through peripheral controllers.
+
+  Technical Reference Manual available at
+    https://github.com/sophgo/sophgo-doc/tree/main/SG200X/TRM
+
+maintainers:
+  - sophgo@lists.linux.dev
+
+allOf:
+  - $ref: /schemas/rtc/rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: sophgo,cv1800b-rtc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RTC Alarm
+      - description: RTC Longpress
+      - description: VBAT DET
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: longpress
+      - const: vbat
+
+  clocks:
+    items:
+      - description: RTC clock source
+      - description: DW8051 MCU clock source
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: mcu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,cv1800.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@5025000 {
+        compatible = "sophgo,cv1800b-rtc", "syscon";
+        reg = <0x5025000 0x2000>;
+        interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+                     <18 IRQ_TYPE_LEVEL_HIGH>,
+                     <19 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "alarm", "longpress", "vbat";
+        clocks = <&clk CLK_RTC_25M>,
+                 <&clk CLK_SRC_RTC_SYS_0>;
+        clock-names = "rtc", "mcu";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml
new file mode 100644
index 000000000000..a82cc3cae576
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/sophgo/sophgo,sg2044-top-syscon.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2044-top-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2044 SoC TOP system controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@gmail.com>
+
+description:
+  The Sophgo SG2044 TOP system controller is a hardware block grouping
+  multiple small functions, such as clocks and some other internal
+  function.
+
+properties:
+  compatible:
+    items:
+      - const: sophgo,sg2044-top-syscon
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2044-pll.h> for valid clock.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@50000000 {
+      compatible = "sophgo,sg2044-top-syscon", "syscon";
+      reg = <0x50000000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&osc>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
new file mode 100644
index 000000000000..30aaf49da03d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/spacemit/spacemit,k1-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 SoC System Controller
+
+maintainers:
+  - Haylen Chu <heylenay@4d2.org>
+
+description:
+  System controllers found on SpacemiT K1 SoC, which are capable of
+  clock, reset and power-management functions.
+
+properties:
+  compatible:
+    enum:
+      - spacemit,k1-syscon-apbc
+      - spacemit,k1-syscon-apmu
+      - spacemit,k1-syscon-mpmu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: osc
+      - const: vctcxo_1m
+      - const: vctcxo_3m
+      - const: vctcxo_24m
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices.
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: spacemit,k1-syscon-apbc
+    then:
+      properties:
+        "#power-domain-cells": false
+    else:
+      required:
+        - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    system-controller@d4050000 {
+        compatible = "spacemit,k1-syscon-mpmu";
+        reg = <0xd4050000 0x209c>;
+        clocks = <&osc>, <&vctcxo_1m>, <&vctcxo_3m>, <&vctcxo_24m>;
+        clock-names = "osc", "vctcxo_1m", "vctcxo_3m", "vctcxo_24m";
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
index 378e9cc5fac2..f3bd0be3b279 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soc/ti/ti,j721e-system-controller.yaml
@@ -26,6 +26,7 @@ properties:
   compatible:
     items:
       - enum:
+          - ti,am654-system-controller
           - ti,j7200-system-controller
           - ti,j721e-system-controller
           - ti,j721s2-system-controller
@@ -68,6 +69,23 @@ patternProperties:
     description:
       The node corresponding to SoC chip identification.
 
+  "^pcie-ctrl@[0-9a-f]+$":
+    type: object
+    description:
+      The node corresponding to PCIe control register.
+
+  "^clock@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/soc/ti/ti,am654-serdes-ctrl.yaml#
+    description:
+      This is the Serdes Control region.
+
+  "^dss-oldi-io-ctrl@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/mfd/syscon.yaml#
+    description:
+      This is the DSS OLDI CTRL region.
+
 required:
   - compatible
   - reg
@@ -110,5 +128,10 @@ examples:
             compatible = "ti,am654-chipid";
             reg = <0x14 0x4>;
         };
+
+        pcie0_ctrl: pcie-ctrl@4070 {
+            compatible = "ti,j784s4-pcie-ctrl", "syscon";
+            reg = <0x4070 0x4>;
+        };
     };
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index 94588353f852..40eb1d7d6cf1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -18,11 +18,7 @@ properties:
   label:
     maxItems: 1
   routing:
-    description: |
-      A list of the connections between audio components.
-      Each entry is a pair of strings, the first being the
-      connection's sink, the second being the connection's source.
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    $ref: audio-graph.yaml#/properties/routing
   aux-devs:
     description: |
       List of phandles pointing to auxiliary devices, such
@@ -39,6 +35,8 @@ properties:
     description: Codec to Codec node
   hp-det-gpios:
     $ref: audio-graph.yaml#/properties/hp-det-gpios
+  mic-det-gpios:
+    $ref: audio-graph.yaml#/properties/mic-det-gpios
   widgets:
     $ref: audio-graph.yaml#/properties/widgets
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/cirrus,cs48l32.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/cirrus,cs48l32.yaml
new file mode 100644
index 000000000000..bf087b57aaf6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/cirrus,cs48l32.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs48l32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS48L32 audio DSP.
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  The CS48L32 is a high-performance low-power audio DSP for smartphones and
+  other portable audio devices. The CS48L32 combines a programmable Halo Core
+  DSP with a variety of power-efficient fixed-function audio processors.
+
+  See also the binding headers:
+
+    include/dt-bindings/sound/cs48l32.yaml
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs48l32
+
+  reg:
+    description: SPI chip-select number.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  vdd-a-supply:
+    description: Regulator supplying VDD_A
+
+  vdd-d-supply:
+    description: Regulator supplying VDD_D
+
+  vdd-io-supply:
+    description: Regulator supplying VDD_IO
+
+  vdd-cp-supply:
+    description: Regulator supplying VDD_CP
+
+  reset-gpios:
+    description:
+      One entry specifying the GPIO controlling /RESET. Although optional,
+      it is strongly recommended to use a hardware reset.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The clock supplied on MCLK1
+
+  clock-names:
+    const: mclk1
+
+  '#sound-dai-cells':
+    const: 1
+
+  cirrus,in-type:
+    description: |
+      A list of input type settings for each ADC input.
+      Inputs are one of these types:
+        CS48L32_IN_TYPE_DIFF : analog differential (default)
+        CS48L32_IN_TYPE_SE :   analog single-ended
+
+      The type of the left (L) and right (R) channel on each input is
+      independently configured, as are the two groups of pins muxable to
+      the input (referred to in the datasheet as "1" and "2").
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description:
+          IN1L_1 analog input type. One of the CS48L32_IN_TYPE_xxx.
+        minimum: 0
+        maximum: 1
+        default: 0
+      - description:
+          IN1R_1 analog input type. One of the CS48L32_IN_TYPE_xxx.
+        minimum: 0
+        maximum: 1
+        default: 0
+      - description:
+          IN1L_2 analog input type. One of the CS48L32_IN_TYPE_xxx.
+        minimum: 0
+        maximum: 1
+        default: 0
+      - description:
+          IN1R_2 analog input type. One of the CS48L32_IN_TYPE_xxx.
+        minimum: 0
+        maximum: 1
+        default: 0
+
+  cirrus,pdm-sup:
+    description: |
+      Indicate which MICBIAS output supplies bias to the microphone.
+      There is one cell per input (IN1, IN2, ...).
+
+      One of the CS48L32_MICBIAS_xxx values.
+        CS48L32_PDM_SUP_VOUT_MIC : mic biased from VOUT_MIC
+        CS48L32_PDM_SUP_MICBIAS1 : mic biased from MICBIAS1
+
+      Also see the INn_PDM_SUP field in the datasheet.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: IN1 PDM supply source
+        minimum: 0
+        maximum: 1
+        default: 0
+      - description: IN2 PDM supply source
+        minimum: 0
+        maximum: 1
+        default: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-a-supply
+  - vdd-d-supply
+  - vdd-io-supply
+  - vdd-cp-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs48l32.h>
+
+    spi@e0006000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0006000 0x1000>;
+
+        codec@1 {
+            compatible = "cirrus,cs48l32";
+
+            reg = <0x1>;
+            spi-max-frequency = <2500000>;
+
+            vdd-a-supply = <&regulator_1v8>;
+            vdd-d-supply = <&regulator_1v2>;
+            vdd-io-supply = <&regulator_1v8>;
+            vdd-cp-supply = <&regulator_1v8>;
+
+            reset-gpios = <&gpio 0 0>;
+
+            clocks = <&clks 0>;
+            clock-names = "mclk1";
+
+            interrupt-parent = <&gpio0>;
+            interrupts = <56 8>;
+
+            #sound-dai-cells = <1>;
+
+            cirrus,in-type = <
+                CS48L32_IN_TYPE_DIFF CS48L32_IN_TYPE_DIFF
+                CS48L32_IN_TYPE_SE   CS48L32_IN_TYPE_SE
+            >;
+
+            cirrus,pdm-sup = <
+              CS48L32_PDM_SUP_MICBIAS1 CS48L32_PDM_SUP_MICBIAS1
+            >;
+        };
+    };
+
+#
+# Minimal config
+#
+  - |
+    #include <dt-bindings/sound/cs48l32.h>
+
+    spi@e0006000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0006000 0x1000>;
+
+        codec@1 {
+            compatible = "cirrus,cs48l32";
+
+            reg = <0x1>;
+
+            vdd-a-supply = <&regulator_1v8>;
+            vdd-d-supply = <&regulator_1v2>;
+            vdd-io-supply = <&regulator_1v8>;
+            vdd-cp-supply = <&regulator_1v8>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/everest,es8375.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/everest,es8375.yaml
new file mode 100644
index 000000000000..4a3d671c66b1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/everest,es8375.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8375 audio CODEC
+
+maintainers:
+  - Michael Zhang <zhangyi@everest-semi.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: everest,es8375
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  vdda-supply:
+    description:
+      Analogue power supply.
+
+  vddd-supply:
+    description:
+      Interface power supply.
+
+  everest,mclk-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Represents the MCLK/SCLK pair pins used as the internal clock.
+      0 represents selecting MCLK.
+      1 represents selecting SCLK.
+    enum: [0, 1]
+    default: 0
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - vdda-supply
+  - vddd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8375: codec@18 {
+        compatible = "everest,es8375";
+        reg = <0x18>;
+        vdda-supply = <&vdd3v3>;
+        vddd-supply = <&vdd3v3>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/everest,es8389.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/everest,es8389.yaml
new file mode 100644
index 000000000000..a673df485ab3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/everest,es8389.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8389.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8389 audio CODEC
+
+maintainers:
+  - Michael Zhang <zhangyi@everest-semi.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: everest,es8389
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8389: codec@10 {
+        compatible = "everest,es8389";
+        reg = <0x10>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
index 8c22e8348b14..1415247c92c8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
@@ -28,6 +28,9 @@ properties:
       - fsl,imx95-aonmix-mqs
       - fsl,imx95-netcmix-mqs
 
+  "#sound-dai-cells":
+    const: 0
+
   clocks:
     minItems: 1
     maxItems: 2
@@ -49,12 +52,17 @@ properties:
   resets:
     maxItems: 1
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - clocks
   - clock-names
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -86,7 +94,7 @@ allOf:
       required:
         - gpr
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/loongson,ls1b-ac97.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/loongson,ls1b-ac97.yaml
new file mode 100644
index 000000000000..1c6a2771f942
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/loongson,ls1b-ac97.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/loongson,ls1b-ac97.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 AC97 Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  The Loongson-1 AC97 controller supports 2-channel stereo output and input.
+  It is paired with the DMA engine to handle playback and capture functions.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls1b-ac97
+      - items:
+          - enum:
+              - loongson,ls1a-ac97
+              - loongson,ls1c-ac97
+          - const: loongson,ls1b-ac97
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: ac97
+      - const: audio-tx
+      - const: audio-rx
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    audio-controller@1fe74000 {
+        compatible = "loongson,ls1b-ac97";
+        reg = <0x1fe74000 0x60>, <0x1fe72420 0x4>, <0x1fe74c4c 0x4>;
+        reg-names = "ac97", "audio-tx", "audio-rx";
+        dmas = <&dma 1>, <&dma 2>;
+        dma-names = "tx", "rx";
+        #sound-dai-cells = <0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/maxim,max98925.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
index 32fd86204a7a..121e8d2d44da 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
@@ -77,11 +77,11 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
-        #include <dt-bindings/gpio/gpio.h>
         audio-codec@3a {
             compatible = "maxim,max98927";
             reg = <0x3a>;
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 76d5a437dc8f..7ba2ea2dfa0b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -96,10 +96,9 @@ patternProperties:
       mediatek,clk-provider:
         $ref: /schemas/types.yaml#/definitions/string
         description: Indicates dai-link clock master.
-        items:
-          enum:
-            - cpu
-            - codec
+        enum:
+          - cpu
+          - codec
 
     additionalProperties: false
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
index cbc641ecbe94..037f21443ad1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
@@ -124,10 +124,9 @@ patternProperties:
       mediatek,clk-provider:
         $ref: /schemas/types.yaml#/definitions/string
         description: Indicates dai-link clock master.
-        items:
-          enum:
-            - cpu
-            - codec
+        enum:
+          - cpu
+          - codec
 
     required:
       - link-name
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
index 2af1d8ffbd8b..356e1feee962 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
@@ -21,6 +21,7 @@ properties:
       - mediatek,mt8195_mt6359_rt1019_rt5682
       - mediatek,mt8195_mt6359_rt1011_rt5682
       - mediatek,mt8195_mt6359_max98390_rt5682
+      - mediatek,mt8195_mt6359
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
@@ -44,6 +45,8 @@ properties:
         - Right Spk
 
         # Sources
+        - Headphone L
+        - Headphone R
         - Headset Mic
         - HPOL
         - HPOR
@@ -88,6 +91,7 @@ patternProperties:
       link-name:
         description: Indicates dai-link name and PCM stream name
         enum:
+          - DL_SRC_BE
           - DPTX_BE
           - ETDM1_IN_BE
           - ETDM2_IN_BE
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
index b4bee466d67a..da89523ccf5f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
@@ -23,6 +23,7 @@ properties:
     enum:
       - nvidia,tegra210-audio-graph-card
       - nvidia,tegra186-audio-graph-card
+      - nvidia,tegra264-audio-graph-card
 
   clocks:
     minItems: 2
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
index e15f387c4c29..66b56e71599b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
@@ -31,7 +31,9 @@ properties:
 
   compatible:
     oneOf:
-      - const: nvidia,tegra186-asrc
+      - enum:
+          - nvidia,tegra186-asrc
+          - nvidia,tegra264-asrc
       - items:
           - enum:
               - nvidia,tegra234-asrc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
index e1362c77472b..46ba167081ef 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -29,6 +29,7 @@ properties:
       - const: nvidia,tegra186-dspk
       - items:
           - enum:
+              - nvidia,tegra264-dspk
               - nvidia,tegra234-dspk
               - nvidia,tegra194-dspk
           - const: nvidia,tegra186-dspk
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
index 15ab40aeab1e..b32f33214ba6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
@@ -26,6 +26,7 @@ properties:
       - enum:
           - nvidia,tegra210-admaif
           - nvidia,tegra186-admaif
+          - nvidia,tegra264-admaif
       - items:
           - enum:
               - nvidia,tegra234-admaif
@@ -39,6 +40,19 @@ properties:
 
   dma-names: true
 
+  interconnects:
+    items:
+      - description: APE read memory client
+      - description: APE write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     description: |
@@ -74,6 +88,9 @@ then:
         Should be "tx1", "tx2" ... "tx10" for DMA Tx channel
       minItems: 1
       maxItems: 20
+    interconnects: false
+    interconnect-names: false
+    iommus: false
 
 else:
   properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
index e4c871797fa6..19a80929f93e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
@@ -27,7 +27,9 @@ properties:
 
   compatible:
     oneOf:
-      - const: nvidia,tegra210-adx
+      - enum:
+          - nvidia,tegra210-adx
+          - nvidia,tegra264-adx
       - items:
           - enum:
               - nvidia,tegra234-adx
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
index c4abac81f207..1c9f24d26819 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -27,6 +27,7 @@ properties:
           - nvidia,tegra210-ahub
           - nvidia,tegra186-ahub
           - nvidia,tegra234-ahub
+          - nvidia,tegra264-ahub
       - items:
           - const: nvidia,tegra194-ahub
           - const: nvidia,tegra186-ahub
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
index 021b72546ba4..89712102cfdf 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
@@ -26,11 +26,13 @@ properties:
 
   compatible:
     oneOf:
-      - const: nvidia,tegra210-amx
+      - enum:
+          - nvidia,tegra210-amx
+          - nvidia,tegra194-amx
+          - nvidia,tegra264-amx
       - items:
           - const: nvidia,tegra186-amx
           - const: nvidia,tegra210-amx
-      - const: nvidia,tegra194-amx
       - items:
           - const: nvidia,tegra234-amx
           - const: nvidia,tegra194-amx
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
index bff551c35da7..bb8088878d4b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-dmic
       - items:
           - enum:
+              - nvidia,tegra264-dmic
               - nvidia,tegra234-dmic
               - nvidia,tegra194-dmic
               - nvidia,tegra186-dmic
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
index a82f11fb6c9a..903e815af8fd 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -25,7 +25,9 @@ properties:
 
   compatible:
     oneOf:
-      - const: nvidia,tegra210-i2s
+      - enum:
+          - nvidia,tegra210-i2s
+          - nvidia,tegra264-i2s
       - items:
           - enum:
               - nvidia,tegra234-i2s
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
index 5b9198602fc6..4c121b9cde1e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
@@ -23,6 +23,7 @@ properties:
       - const: nvidia,tegra210-mbdrc
       - items:
           - enum:
+              - nvidia,tegra264-mbdrc
               - nvidia,tegra234-mbdrc
               - nvidia,tegra194-mbdrc
               - nvidia,tegra186-mbdrc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
index 049898f02e85..56b4c4fc123c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-amixer
       - items:
           - enum:
+              - nvidia,tegra264-amixer
               - nvidia,tegra234-amixer
               - nvidia,tegra194-amixer
               - nvidia,tegra186-amixer
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
index d0280d8aa3af..bde4ac6319b1 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
@@ -31,6 +31,7 @@ properties:
       - const: nvidia,tegra210-mvc
       - items:
           - enum:
+              - nvidia,tegra264-mvc
               - nvidia,tegra234-mvc
               - nvidia,tegra194-mvc
               - nvidia,tegra186-mvc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
index 9017fb6d575d..756c3096a2d6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
@@ -25,6 +25,7 @@ properties:
       - const: nvidia,tegra210-ope
       - items:
           - enum:
+              - nvidia,tegra264-ope
               - nvidia,tegra234-ope
               - nvidia,tegra194-ope
               - nvidia,tegra186-ope
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
index 1e373c49d639..2f11a484dc2e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
@@ -24,6 +24,7 @@ properties:
       - const: nvidia,tegra210-peq
       - items:
           - enum:
+              - nvidia,tegra264-peq
               - nvidia,tegra234-peq
               - nvidia,tegra194-peq
               - nvidia,tegra186-peq
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
index 185ca0be4f02..959aa7fffdac 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-sfc
       - items:
           - enum:
+              - nvidia,tegra264-sfc
               - nvidia,tegra234-sfc
               - nvidia,tegra194-sfc
               - nvidia,tegra186-sfc
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
index 3ca9affb79a2..8a8767589ee0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
@@ -20,11 +20,13 @@ properties:
 
   compatible:
     oneOf:
-      - const: nvidia,tegra30-hda
+      - enum:
+          - nvidia,tegra30-hda
+          - nvidia,tegra194-hda
+          - nvidia,tegra234-hda
+          - nvidia,tegra264-hda
       - items:
           - enum:
-              - nvidia,tegra234-hda
-              - nvidia,tegra194-hda
               - nvidia,tegra186-hda
               - nvidia,tegra210-hda
               - nvidia,tegra124-hda
@@ -43,15 +45,12 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    minItems: 1
     maxItems: 3
 
   clock-names:
-    minItems: 2
-    items:
-      - const: hda
-      - const: hda2hdmi
-      - const: hda2codec_2x
+    minItems: 1
+    maxItems: 3
 
   resets:
     minItems: 2
@@ -59,10 +58,7 @@ properties:
 
   reset-names:
     minItems: 2
-    items:
-      - const: hda
-      - const: hda2hdmi
-      - const: hda2codec_2x
+    maxItems: 3
 
   power-domains:
     maxItems: 1
@@ -93,6 +89,92 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra30-hda
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: hda
+            - const: hda2hdmi
+            - const: hda2codec_2x
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: hda
+            - const: hda2hdmi
+            - const: hda2codec_2x
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-hda
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: hda
+            - const: hda2hdmi
+            - const: hda2codec_2x
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: hda
+            - const: hda2hdmi
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-hda
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hda
+            - const: hda2codec_2x
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: hda
+            - const: hda2codec_2x
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra264-hda
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: hda
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: hda
+            - const: hda2codec_2x
+        power-domains: false
+
 examples:
   - |
     #include<dt-bindings/clock/tegra124-car-common.h>
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index b9e33a7429b0..590eb177f57a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -28,9 +28,12 @@ properties:
               - qcom,sm8750-sndcard
           - const: qcom,sm8450-sndcard
       - enum:
+          - fairphone,fp5-sndcard
           - qcom,apq8096-sndcard
           - qcom,qcm6490-idp-sndcard
           - qcom,qcs6490-rb3gen2-sndcard
+          - qcom,qcs9075-sndcard
+          - qcom,qcs9100-sndcard
           - qcom,qrb4210-rb2-sndcard
           - qcom,qrb5165-rb5-sndcard
           - qcom,sc7180-qdsp6-sndcard
@@ -190,4 +193,19 @@ examples:
                 sound-dai = <&vamacro 0>;
             };
         };
+
+        usb-dai-link {
+            link-name = "USB Playback";
+            cpu {
+                sound-dai = <&q6afedai USB_RX>;
+            };
+
+            codec {
+                sound-dai = <&usbdai USB_RX>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+        };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index 10531350c336..ab1c6285dbf8 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -23,9 +23,15 @@ properties:
       - qcom,wcd9380-codec
       - qcom,wcd9385-codec
 
+  mux-controls:
+    description: A reference to the audio mux switch for
+      switching CTIA/OMTP Headset types
+    maxItems: 1
+
   us-euro-gpios:
     description: GPIO spec for swapping gnd and mic segments
     maxItems: 1
+    deprecated: true
 
 required:
   - compatible
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/realtek,alc203.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/realtek,alc203.yaml
new file mode 100644
index 000000000000..6b90788b45eb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/realtek,alc203.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,alc203.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek ALC203 AC97 Audio Codec
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  ALC203 is a full duplex AC97 2.3 compatible stereo audio codec.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,alc203
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    audio-codec {
+        compatible = "realtek,alc203";
+        #sound-dai-cells = <0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml
new file mode 100644
index 000000000000..5acb05cdfefd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9123.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9123 Audio Amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description:
+  RT9123 is a 3.2W mono Class-D audio amplifier that features high efficiency
+  and performance with ultra-low quiescent current. The digital audio interface
+  support various formats, including I2S, left-justified, right-justified, and
+  TDM formats.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9123
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@5e {
+            compatible = "richtek,rt9123";
+            reg = <0x5e>;
+            enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123p.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123p.yaml
new file mode 100644
index 000000000000..693511dfdda4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/richtek,rt9123p.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9123p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9123P Audio Amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description:
+  RT9123P is a RT9123 variant which does not support I2C control.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9123p
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+
+  enable-delay-ms:
+    description:
+      Delay time for 'ENABLE' pin changes intended to make I2S clocks ready to
+      prevent speaker pop noise. The unit is in millisecond.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    amplifier {
+        compatible = "richtek,rt9123p";
+        enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+        #sound-dai-cells = <0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sound/rockchip,rk3576-sai.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/rockchip,rk3576-sai.yaml
new file mode 100644
index 000000000000..149da9a91451
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sound/rockchip,rk3576-sai.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,rk3576-sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Audio Interface Controller
+
+description:
+  The Rockchip Serial Audio Interface (SAI) controller is a flexible audio
+  controller that implements the I2S, I2S/TDM and the PDM standards.
+
+maintainers:
+  - Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3576-sai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - enum: [tx, rx]
+      - const: rx
+
+  clocks:
+    items:
+      - description: master audio clock
+      - description: AHB clock driving the interface
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: hclk
+
+  resets:
+    minItems: 1
+    items:
+      - description: reset for the mclk domain
+      - description: reset for the hclk domain
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: m
+      - const: h
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,sai-rx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of the controller's SDI ports to actual input lanes,
+      as well as the number of input lanes.
+      rockchip,sai-rx-route = <3> would mean sdi3 is receiving from data0, and
+      that there is only one receiving lane.
+      This property's absence is to be understood as only one receiving lane
+      being used if the controller has capture capabilities.
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+
+  rockchip,sai-tx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of the controller's SDO ports to actual output lanes,
+      as well as the number of output lanes.
+      rockchip,sai-tx-route = <3> would mean sdo3 is sending to data0, and
+      that there is only one transmitting lane.
+      This property's absence is to be understood as only one transmitting lane
+      being used if the controller has playback capabilities.
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3576-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rockchip,rk3576-power.h>
+    #include <dt-bindings/reset/rockchip,rk3576-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        sai1: sai@2a610000 {
+            compatible = "rockchip,rk3576-sai";
+            reg = <0x0 0x2a610000 0x0 0x1000>;
+            interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru MCLK_SAI1_8CH>, <&cru HCLK_SAI1_8CH>;
+            clock-names = "mclk", "hclk";
+            dmas = <&dmac0 2>, <&dmac0 3>;
+            dma-names = "tx", "rx";
+            power-domains = <&power RK3576_PD_AUDIO>;
+            resets = <&cru SRST_M_SAI1_8CH>, <&cru SRST_H_SAI1_8CH>;
+            reset-names = "m", "h";
+            pinctrl-names = "default";
+            pinctrl-0 = <&sai1m0_lrck
+                         &sai1m0_sclk
+                         &sai1m0_sdi0
+                         &sai1m0_sdo0
+                         &sai1m0_sdo1
+                         &sai1m0_sdo2
+                         &sai1m0_sdo3>;
+            rockchip,sai-tx-route = <3 1 2 0>;
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 3591c8c49bfe..95d947fda6a7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -15,13 +15,18 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,soundwire-v1.3.0
-      - qcom,soundwire-v1.5.0
-      - qcom,soundwire-v1.5.1
-      - qcom,soundwire-v1.6.0
-      - qcom,soundwire-v1.7.0
-      - qcom,soundwire-v2.0.0
+    oneOf:
+      - enum:
+          - qcom,soundwire-v1.3.0
+          - qcom,soundwire-v1.5.0
+          - qcom,soundwire-v1.5.1
+          - qcom,soundwire-v1.6.0
+          - qcom,soundwire-v1.7.0
+          - qcom,soundwire-v2.0.0
+      - items:
+          - enum:
+              - qcom,soundwire-v2.1.0
+          - const: qcom,soundwire-v2.0.0
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/fsl,dspi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
index 7ca8fceda717..bf9cce53c48d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/fsl,dspi.yaml
@@ -105,12 +105,12 @@ examples:
         big-endian;
 
         flash@0 {
-                compatible = "jedec,spi-nor";
-                reg = <0>;
-                spi-max-frequency = <16000000>;
-                spi-cpol;
-                spi-cpha;
-                spi-cs-setup-delay-ns = <100>;
-                spi-cs-hold-delay-ns = <50>;
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <16000000>;
+            spi-cpol;
+            spi-cpha;
+            spi-cs-setup-delay-ns = <100>;
+            spi-cs-hold-delay-ns = <50>;
         };
     };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
index 4e0d391e1d69..c97bf48b56b4 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
@@ -59,8 +59,3 @@ examples:
         reg = <0>;
       };
     };
-
-    shm: syscon@c8001000 {
-      compatible = "nuvoton,wpcm450-shm", "syscon";
-      reg = <0xc8001000 0x1000>;
-    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 48e97e240265..8b3640280559 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jonathan Hunter <jonathanh@nvidia.com>
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
     enum:
@@ -47,6 +44,9 @@ properties:
       - const: rx
       - const: tx
 
+  iommus:
+    maxItems: 1
+
 patternProperties:
   "@[0-9a-f]+$":
     type: object
@@ -69,6 +69,18 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: nvidia,tegra234-qspi
+    then:
+      properties:
+        iommus: false
+
 examples:
   - |
     #include <dt-bindings/clock/tegra210-car.h>
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
index aa3f93319203..cb1f15224b45 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
@@ -21,8 +21,12 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,ipq9574-snand
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq5018-snand
+          - const: qcom,ipq9574-snand
+      - const: qcom,ipq9574-snand
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index 49649fc3f95a..e0c7047ae8ad 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -4,14 +4,11 @@
 $id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas MSIOF SPI controller
+title: Renesas MSIOF SPI / I2S controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -146,24 +143,38 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 64
 
+  # for MSIOF-I2S
+  port:
+    $ref: ../sound/audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
   - power-domains
-  - '#address-cells'
-  - '#size-cells'
-
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          const: renesas,sh-mobile-msiof
-then:
-  required:
-    - resets
+
+allOf:
+  # additional "required""
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,sh-mobile-msiof
+    then:
+      required:
+        - resets
+
+  # If it doesn't have "port" node, it is "MSIOF-SPI"
+  - if:
+      not:
+        required:
+          - port
+    then:
+      allOf:
+        - $ref: spi-controller.yaml#
 
 unevaluatedProperties: false
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
index 3c206a64d60a..fe298d47b1a9 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - enum:
               - samsung,exynos8895-spi
+              - samsung,exynosautov920-spi
           - const: samsung,exynos850-spi
       - const: samsung,exynos7-spi
         deprecated: true
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index 53d00ca643b3..0543c526b783 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -83,9 +83,7 @@ properties:
         const: canaan,k210-spi
       - description: Renesas RZ/N1 SPI Controller
         items:
-          - enum:
-              - renesas,r9a06g032-spi # RZ/N1D
-              - renesas,r9a06g033-spi # RZ/N1S
+          - const: renesas,r9a06g032-spi # RZ/N1D
           - const: renesas,rzn1-spi   # RZ/N1
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 0bb443b8decd..8fc17e16efb2 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -8,12 +8,13 @@ title: Peripheral-specific properties for a SPI bus.
 
 description:
   Many SPI controllers need to add properties to peripheral devices. They could
-  be common properties like spi-max-frequency, spi-cpha, etc. or they could be
-  controller specific like delay in clock or data lines, etc. These properties
-  need to be defined in the peripheral node because they are per-peripheral and
-  there can be multiple peripherals attached to a controller. All those
-  properties are listed here. The controller specific properties should go in
-  their own separate schema that should be referenced from here.
+  be common properties like spi-max-frequency, spi-cs-high, etc. or they could
+  be controller specific like delay in clock or data lines, etc. These
+  properties need to be defined in the peripheral node because they are
+  per-peripheral and there can be multiple peripherals attached to a
+  controller. All those properties are listed here. The controller specific
+  properties should go in their own separate schema that should be referenced
+  from here.
 
 maintainers:
   - Mark Brown <broonie@kernel.org>
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-rockchip.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 104f5ffdd04e..748faf7f7081 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -34,6 +34,7 @@ properties:
               - rockchip,rk3328-spi
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
+              - rockchip,rk3528-spi
               - rockchip,rk3562-spi
               - rockchip,rk3568-spi
               - rockchip,rk3576-spi
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml
index 948ff7a09643..66e54dedab14 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml
@@ -14,7 +14,12 @@ allOf:
 
 properties:
   compatible:
-    const: sophgo,sg2044-spifmc-nor
+    oneOf:
+      - const: sophgo,sg2044-spifmc-nor
+      - items:
+          - enum:
+              - sophgo,sg2042-spifmc-nor
+          - const: sophgo,sg2044-spifmc-nor
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
index 5f276f27dc4c..272bc308726b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
@@ -68,6 +68,7 @@ required:
   - compatible
   - reg
   - clocks
+  - resets
   - interrupts
   - st,syscfg-dlyb
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/spmi/apple,spmi.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/spmi/apple,spmi.yaml
new file mode 100644
index 000000000000..16bd7eb2b7af
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/spmi/apple,spmi.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/apple,spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SPMI controller
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: A SPMI controller present on most Apple SoCs
+
+allOf:
+  - $ref: spmi.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-spmi
+          - apple,t6000-spmi
+          - apple,t8112-spmi
+      - const: apple,spmi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    spmi@920a1300 {
+        compatible = "apple,t6000-spmi", "apple,spmi";
+        reg = <0x920a1300 0x100>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        pmic@f {
+            reg = <0xf SPMI_USID>;
+            /* PMIC-specific properties */
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index a7236f7db4ec..e7f7cf72719e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -50,6 +50,7 @@ properties:
           - enum:
               - allwinner,sun50i-a100-system-control
               - allwinner,sun50i-h6-system-control
+              - allwinner,sun55i-a523-system-control
           - const: allwinner,sun50i-a64-system-control
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/thermal/airoha,en7581-thermal.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/thermal/airoha,en7581-thermal.yaml
new file mode 100644
index 000000000000..ca0242ef0378
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/thermal/airoha,en7581-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/airoha,en7581-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 Thermal Sensor and Monitor
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+properties:
+  compatible:
+    const: airoha,en7581-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  airoha,chip-scu:
+    description: phandle to the chip SCU syscon
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - airoha,chip-scu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    thermal-sensor@1efbd800 {
+        compatible = "airoha,en7581-thermal";
+        reg = <0x1efbd000 0xd5c>;
+        interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+        airoha,chip-scu = <&chip_scu>;
+
+        #thermal-sensor-cells = <0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index f9d8012c8cf5..0e653bbe9884 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
       - description: v1 of TSENS
         items:
           - enum:
+              - qcom,ipq5018-tsens
               - qcom,msm8937-tsens
               - qcom,msm8956-tsens
               - qcom,msm8976-tsens
@@ -251,6 +252,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5018-tsens
               - qcom,ipq8064-tsens
               - qcom,msm8960-tsens
               - qcom,tsens-v0_1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
deleted file mode 100644
index e698e3488735..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Altera Timer
-
-Required properties:
-
-- compatible : should be "altr,timer-1.0"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : Should contain the timer interrupt number
-- clock-frequency : The frequency of the clock that drives the counter, in Hz.
-
-Example:
-
-timer {
-	compatible = "altr,timer-1.0";
-	reg = <0x00400000 0x00000020>;
-	interrupt-parent = <&cpu>;
-	interrupts = <11>;
-	clock-frequency = <125000000>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.yaml
new file mode 100644
index 000000000000..576260c72d42
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/altr,timer-1.0.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/altr,timer-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Timer
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: altr,timer-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of the clock that drives the counter, in Hz.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@400000 {
+        compatible = "altr,timer-1.0";
+        reg = <0x00400000 0x00000020>;
+        interrupts = <11>;
+        clock-frequency = <125000000>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
deleted file mode 100644
index 48f84d74edde..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-ARM MPS2 timer
-
-The MPS2 platform has simple general-purpose 32 bits timers.
-
-Required properties:
-- compatible	: Should be "arm,mps2-timer"
-- reg		: Address and length of the register set
-- interrupts	: Reference to the timer interrupt
-
-Required clocking property, have to be one of:
-- clocks	  : The input clock of the timer
-- clock-frequency : The rate in HZ in input of the ARM MPS2 timer
-
-Examples:
-
-timer1: mps2-timer@40000000 {
-	compatible = "arm,mps2-timer";
-	reg = <0x40000000 0x1000>;
-	interrupts = <8>;
-	clocks = <&sysclk>;
-};
-
-timer2: mps2-timer@40001000 {
-	compatible = "arm,mps2-timer";
-	reg = <0x40001000 0x1000>;
-	interrupts = <9>;
-	clock-frequency = <25000000>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.yaml
new file mode 100644
index 000000000000..64c6aedd7e8e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/arm,mps2-timer.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm,mps2-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MPS2 timer
+
+maintainers:
+  - Vladimir Murzin <vladimir.murzin@arm.com>
+
+description:
+  The MPS2 platform has simple general-purpose 32 bits timers.
+
+properties:
+  compatible:
+    const: arm,mps2-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: Rate in Hz of the timer input clock
+
+oneOf:
+  - required: [clocks]
+  - required: [clock-frequency]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@40000000 {
+        compatible = "arm,mps2-timer";
+        reg = <0x40000000 0x1000>;
+        interrupts = <8>;
+        clocks = <&sysclk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
deleted file mode 100644
index d4c62e7b1714..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Cirrus Logic CLPS711X Timer Counter
-
-Required properties:
-- compatible: Shall contain "cirrus,ep7209-timer".
-- reg       : Address and length of the register set.
-- interrupts: The interrupt number of the timer.
-- clocks    : phandle of timer reference clock.
-
-Note: Each timer should have an alias correctly numbered in "aliases" node.
-
-Example:
-	aliases {
-		timer0 = &timer1;
-		timer1 = &timer2;
-	};
-
-	timer1: timer@80000300 {
-		compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
-		reg = <0x80000300 0x4>;
-		interrupts = <8>;
-		clocks = <&clks 5>;
-	};
-
-	timer2: timer@80000340 {
-		compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
-		reg = <0x80000340 0x4>;
-		interrupts = <9>;
-		clocks = <&clks 6>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.yaml
new file mode 100644
index 000000000000..507b777e16bc
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cirrus,clps711x-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Timer Counter
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cirrus,ep7312-timer
+          - const: cirrus,ep7209-timer
+      - const: cirrus,ep7209-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@80000300 {
+        compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
+        reg = <0x80000300 0x4>;
+        interrupts = <8>;
+        clocks = <&clks 5>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/cnxt,cx92755-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/cnxt,cx92755-timer.yaml
new file mode 100644
index 000000000000..8f1a5af32a36
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/cnxt,cx92755-timer.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cnxt,cx92755-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Conexant Digicolor SoCs Timer Controller
+
+maintainers:
+  - Baruch Siach <baruch@tkos.co.il>
+
+properties:
+  compatible:
+    const: cnxt,cx92755-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Contains 8 interrupts, one for each timer
+    items:
+      - description: interrupt for timer 0
+      - description: interrupt for timer 1
+      - description: interrupt for timer 2
+      - description: interrupt for timer 3
+      - description: interrupt for timer 4
+      - description: interrupt for timer 5
+      - description: interrupt for timer 6
+      - description: interrupt for timer 7
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@f0000fc0 {
+      compatible = "cnxt,cx92755-timer";
+      reg = <0xf0000fc0 0x40>;
+      interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+      clocks = <&main_clk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt
deleted file mode 100644
index 6b04344f4bea..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-=================
-gx6605s SOC Timer
-=================
-
-The timer is used in gx6605s soc as system timer and the driver
-contain clk event and clk source.
-
-==============================
-timer node bindings definition
-==============================
-
-	Description: Describes gx6605s SOC timer
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,gx6605s-timer"
-	- reg
-		Usage: required
-		Value type: <u32 u32>
-		Definition: <phyaddr size> in soc from cpu view
-	- clocks
-		Usage: required
-		Value type: phandle + clock specifier cells
-		Definition: must be input clk node
-	- interrupt
-		Usage: required
-		Value type: <u32>
-		Definition: must be timer irq num defined by soc
-
-Examples:
----------
-
-	timer0: timer@20a000 {
-		compatible = "csky,gx6605s-timer";
-		reg = <0x0020a000 0x400>;
-		clocks = <&dummy_apb_clk>;
-		interrupts = <10>;
-		interrupt-parent = <&intc>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.yaml
new file mode 100644
index 000000000000..888fc8113996
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/csky,gx6605s-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: gx6605s SOC Timer
+
+maintainers:
+  - Guo Ren <guoren@kernel.org>
+
+properties:
+  compatible:
+    const: csky,gx6605s-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@20a000 {
+        compatible = "csky,gx6605s-timer";
+        reg = <0x0020a000 0x400>;
+        clocks = <&dummy_apb_clk>;
+        interrupts = <10>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.txt
deleted file mode 100644
index f5c7e99cf52b..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-============================
-C-SKY Multi-processors Timer
-============================
-
-C-SKY multi-processors timer is designed for C-SKY SMP system and the
-regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
-
- - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
- - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
- - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
-
-==============================
-timer node bindings definition
-==============================
-
-	Description: Describes SMP timer
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,mptimer"
-	- clocks
-		Usage: required
-		Value type: <node>
-		Definition: must be input clk node
-	- interrupts
-		Usage: required
-		Value type: <u32>
-		Definition: must be timer irq num defined by soc
-
-Examples:
----------
-
-	timer: timer {
-		compatible = "csky,mptimer";
-		clocks = <&dummy_apb_clk>;
-		interrupts = <16>;
-		interrupt-parent = <&intc>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.yaml
new file mode 100644
index 000000000000..12cc5282c8f8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/csky,mptimer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/csky,mptimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: C-SKY Multi-processors Timer
+
+maintainers:
+  - Flavio Suligoi <f.suligoi@asem.it>
+  - Guo Ren <guoren@kernel.org>
+
+description: |
+  C-SKY multi-processors timer is designed for C-SKY SMP system and the regs are
+  accessed by cpu co-processor 4 registers with mtcr/mfcr.
+
+   - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
+   - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
+   - PTIM_CCVR "cr<3, 14>" Current counter value reg.
+   - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
+
+properties:
+  compatible:
+    items:
+      - const: csky,mptimer
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer {
+        compatible = "csky,mptimer";
+        clocks = <&dummy_apb_clk>;
+        interrupts = <16>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/digicolor-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/digicolor-timer.txt
deleted file mode 100644
index d1b659bbc29f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/digicolor-timer.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Conexant Digicolor SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be "cnxt,cx92755-timer"
-- reg : Specifies base physical address and size of the "Agent Communication"
-  timer registers
-- interrupts : Contains 8 interrupts, one for each timer
-- clocks: phandle to the main clock
-
-Example:
-
-	timer@f0000fc0 {
-		compatible = "cnxt,cx92755-timer";
-		reg = <0xf0000fc0 0x40>;
-		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
-		clocks = <&main_clk>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/econet,en751221-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/econet,en751221-timer.yaml
new file mode 100644
index 000000000000..c1e7c2b6afde
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/econet,en751221-timer.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/econet,en751221-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EcoNet EN751221 High Precision Timer (HPT)
+
+maintainers:
+  - Caleb James DeLisle <cjd@cjdns.fr>
+
+description:
+  The EcoNet High Precision Timer (HPT) is a timer peripheral found in various
+  EcoNet SoCs, including the EN751221 and EN751627 families. It provides per-VPE
+  count/compare registers and a per-CPU control register, with a single interrupt
+  line using a percpu-devid interrupt mechanism.
+
+properties:
+  compatible:
+    oneOf:
+      - const: econet,en751221-timer
+      - items:
+          - const: econet,en751627-timer
+          - const: econet,en751221-timer
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+    description: A percpu-devid timer interrupt shared across CPUs.
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: econet,en751627-timer
+    then:
+      properties:
+        reg:
+          items:
+            - description: VPE timers 0 and 1
+            - description: VPE timers 2 and 3
+    else:
+      properties:
+        reg:
+          items:
+            - description: VPE timers 0 and 1
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@1fbf0400 {
+        compatible = "econet,en751627-timer", "econet,en751221-timer";
+        reg = <0x1fbf0400 0x100>, <0x1fbe0000 0x100>;
+        interrupt-parent = <&intc>;
+        interrupts = <30>;
+        clocks = <&hpt_clock>;
+    };
+  - |
+    timer@1fbf0400 {
+        compatible = "econet,en751221-timer";
+        reg = <0x1fbe0400 0x100>;
+        interrupt-parent = <&intc>;
+        interrupts = <30>;
+        clocks = <&hpt_clock>;
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.yaml
new file mode 100644
index 000000000000..317c5010c4c1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ezchip,nps400-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EZChip NPS400 Timers
+
+maintainers:
+  - Noam Camus <noamca@mellanox.com>
+
+properties:
+  compatible:
+    enum:
+      - ezchip,nps400-timer0
+      - ezchip,nps400-timer1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ezchip,nps400-timer0
+    then:
+      required: [ interrupts ]
+
+examples:
+  - |
+    timer {
+        compatible = "ezchip,nps400-timer0";
+        interrupts = <3>;
+        clocks = <&sysclk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
deleted file mode 100644
index e3cfce8fecc5..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NPS Network Processor
-
-Required properties:
-
-- compatible :	should be "ezchip,nps400-timer0"
-
-Clocks required for compatible = "ezchip,nps400-timer0":
-- interrupts : The interrupt of the first timer
-- clocks : Must contain a single entry describing the clock input
-
-Example:
-
-timer {
-	compatible = "ezchip,nps400-timer0";
-	interrupts = <3>;
-	clocks = <&sysclk>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
deleted file mode 100644
index c0ab4190b8fb..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-NPS Network Processor
-
-Required properties:
-
-- compatible :	should be "ezchip,nps400-timer1"
-
-Clocks required for compatible = "ezchip,nps400-timer1":
-- clocks : Must contain a single entry describing the clock input
-
-Example:
-
-timer {
-	compatible = "ezchip,nps400-timer1";
-	clocks = <&sysclk>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.txt
deleted file mode 100644
index fc1c571f7412..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Freescale General-purpose Timers Module
-
-Required properties:
-  - compatible : should be
-    "fsl,<chip>-gtm", "fsl,gtm" for SOC GTMs
-    "fsl,<chip>-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs
-    "fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs
-  - reg : should contain gtm registers location and length (0x40).
-  - interrupts : should contain four interrupts.
-  - clock-frequency : specifies the frequency driving the timer.
-
-Example:
-
-timer@500 {
-	compatible = "fsl,mpc8360-gtm", "fsl,gtm";
-	reg = <0x500 0x40>;
-	interrupts = <90 8 78 8 84 8 72 8>;
-	interrupt-parent = <&ipic>;
-	/* filled by u-boot */
-	clock-frequency = <0>;
-};
-
-timer@440 {
-	compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm";
-	reg = <0x440 0x40>;
-	interrupts = <12 13 14 15>;
-	interrupt-parent = <&qeic>;
-	/* filled by u-boot */
-	clock-frequency = <0>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.yaml
new file mode 100644
index 000000000000..1f35f1ee0be2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/fsl,gtm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,gtm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale General-purpose Timers Module
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+properties:
+  compatible:
+    oneOf:
+      # for SoC GTMs
+      - items:
+          - enum:
+              - fsl,mpc8308-gtm
+              - fsl,mpc8313-gtm
+              - fsl,mpc8315-gtm
+              - fsl,mpc8360-gtm
+          - const: fsl,gtm
+
+      # for QE GTMs
+      - items:
+          - enum:
+              - fsl,mpc8360-qe-gtm
+              - fsl,mpc8569-qe-gtm
+          - const: fsl,qe-gtm
+          - const: fsl,gtm
+
+      # for CPM2 GTMs (no known examples)
+      - items:
+          # - enum:
+          #     - fsl,<chip>-cpm2-gtm
+          - const: fsl,cpm2-gtm
+          - const: fsl,gtm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for timer 1 (e.g. GTM1 or GTM5)
+      - description: Interrupt for timer 2 (e.g. GTM2 or GTM6)
+      - description: Interrupt for timer 3 (e.g. GTM3 or GTM7)
+      - description: Interrupt for timer 4 (e.g. GTM4 or GTM8)
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@500 {
+        compatible = "fsl,mpc8360-gtm", "fsl,gtm";
+        reg = <0x500 0x40>;
+        interrupts = <90 IRQ_TYPE_LEVEL_LOW>,
+                     <78 IRQ_TYPE_LEVEL_LOW>,
+                     <84 IRQ_TYPE_LEVEL_LOW>,
+                     <72 IRQ_TYPE_LEVEL_LOW>;
+        /* filled by u-boot */
+        clock-frequency = <0>;
+    };
+
+  - |
+    timer@440 {
+        compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm";
+        reg = <0x440 0x40>;
+        interrupts = <12>, <13>, <14>, <15>;
+        /* filled by u-boot */
+        clock-frequency = <0>;
+    };
+
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/fsl,vf610-pit.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/fsl,vf610-pit.yaml
new file mode 100644
index 000000000000..bee2c35bd0e2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/fsl,vf610-pit.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,vf610-pit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Periodic Interrupt Timer (PIT)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The PIT module is an array of timers that can be used to raise interrupts
+  and trigger DMA channels.
+
+properties:
+  compatible:
+    enum:
+      - fsl,vf610-pit
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pit
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@40037000 {
+        compatible = "fsl,vf610-pit";
+        reg = <0x40037000 0x1000>;
+        interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_PIT>;
+        clock-names = "pit";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
deleted file mode 100644
index 7afce80bf6a0..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Pistachio general-purpose timer based clocksource
-
-Required properties:
- - compatible: "img,pistachio-gptimer".
- - reg: Address range of the timer registers.
- - interrupts: An interrupt for each of the four timers
- - clocks: Should contain a clock specifier for each entry in clock-names
- - clock-names: Should contain the following entries:
-                "sys", interface clock
-                "slow", slow counter clock
-                "fast", fast counter clock
- - img,cr-periph: Must contain a phandle to the peripheral control
-		  syscon node.
-
-Example:
-	timer: timer@18102000 {
-		compatible = "img,pistachio-gptimer";
-		reg = <0x18102000 0x100>;
-		interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SHARED 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SHARED 62 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SHARED 63 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
-		         <&clk_periph PERIPH_CLK_COUNTER_SLOW>,
-			 <&cr_periph SYS_CLK_TIMER>;
-		clock-names = "fast", "slow", "sys";
-		img,cr-periph = <&cr_periph>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.yaml
new file mode 100644
index 000000000000..a8654bcf68a9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/img,pistachio-gptimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pistachio general-purpose timer
+
+maintainers:
+  - Ezequiel Garcia <ezequiel.garcia@imgtec.com>
+
+properties:
+  compatible:
+    const: img,pistachio-gptimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Timer0 interrupt
+      - description: Timer1 interrupt
+      - description: Timer2 interrupt
+      - description: Timer3 interrupt
+
+  clocks:
+    items:
+      - description: Fast counter clock
+      - description: Slow counter clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: fast
+      - const: slow
+      - const: sys
+
+  img,cr-periph:
+    description: Peripheral control syscon phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - img,cr-periph
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/clock/pistachio-clk.h>
+
+    timer@18102000 {
+        compatible = "img,pistachio-gptimer";
+        reg = <0x18102000 0x100>;
+        interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 61 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 62 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SHARED 63 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+                 <&clk_periph PERIPH_CLK_COUNTER_SLOW>,
+                 <&cr_periph SYS_CLK_TIMER>;
+        clock-names = "fast", "slow", "sys";
+        img,cr-periph = <&cr_periph>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/jcore,pit.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/jcore,pit.txt
deleted file mode 100644
index af5dd35469d7..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/jcore,pit.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-J-Core Programmable Interval Timer and Clocksource
-
-Required properties:
-
-- compatible: Must be "jcore,pit".
-
-- reg: Memory region(s) for timer/clocksource registers. For SMP,
-  there should be one region per cpu, indexed by the sequential,
-  zero-based hardware cpu number.
-
-- interrupts: An interrupt to assign for the timer. The actual pit
-  core is integrated with the aic and allows the timer interrupt
-  assignment to be programmed by software, but this property is
-  required in order to reserve an interrupt number that doesn't
-  conflict with other devices.
-
-
-Example:
-
-timer@200 {
-	compatible = "jcore,pit";
-	reg = < 0x200 0x30 0x500 0x30 >;
-	interrupts = < 0x48 >;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/jcore,pit.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/jcore,pit.yaml
new file mode 100644
index 000000000000..9e6e25b75293
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/jcore,pit.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/jcore,pit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: J-Core Programmable Interval Timer and Clocksource
+
+maintainers:
+  - Rich Felker <dalias@libc.org>
+
+properties:
+  compatible:
+    const: jcore,pit
+
+  reg:
+    description:
+      Memory region(s) for timer/clocksource registers. For SMP, there should be
+      one region per cpu, indexed by the sequential, zero-based hardware cpu
+      number.
+
+  interrupts:
+    description:
+      An interrupt to assign for the timer. The actual pit core is integrated
+      with the aic and allows the timer interrupt assignment to be programmed by
+      software, but this property is required in order to reserve an interrupt
+      number that doesn't conflict with other devices.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@200 {
+        compatible = "jcore,pit";
+        reg = <0x200 0x30 0x500 0x30>;
+        interrupts = <0x48>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
deleted file mode 100644
index b2d07ad90e9a..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-TI-NSPIRE timer
-
-Required properties:
-
-- compatible : should be "lsi,zevio-timer".
-- reg : The physical base address and size of the timer (always first).
-- clocks: phandle to the source clock.
-
-Optional properties:
-
-- interrupts : The interrupt number of the first timer.
-- reg : The interrupt acknowledgement registers
-	(always after timer base address)
-
-If any of the optional properties are not given, the timer is added as a
-clock-source only.
-
-Example:
-
-timer {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
-	interrupts = <19>;
-	clocks = <&timer_clk>;
-};
-
-Example (no clock-events):
-
-timer {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>;
-	clocks = <&timer_clk>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml
new file mode 100644
index 000000000000..358455d8e7a8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/lsi,zevio-timer.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/lsi,zevio-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE timer
+
+maintainers:
+  - Daniel Tang <dt.tangr@gmail.com>
+
+properties:
+  compatible:
+    const: lsi,zevio-timer
+
+  reg:
+    minItems: 1
+    items:
+      - description: Timer registers
+      - description: Interrupt acknowledgement registers (optional)
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      required: [ interrupts ]
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@900d0000 {
+        compatible = "lsi,zevio-timer";
+        reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+        interrupts = <19>;
+        clocks = <&timer_clk>;
+    };
+  - |
+    timer@900d0000 {
+        compatible = "lsi,zevio-timer";
+        reg = <0x900D0000 0x1000>;
+        clocks = <&timer_clk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-timer.yaml
new file mode 100644
index 000000000000..bc0677fe86eb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-timer.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/marvell,armada-370-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370, 375, 380 and XP Timers
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,armada-380-timer
+          - const: marvell,armada-xp-timer
+      - items:
+          - const: marvell,armada-375-timer
+          - const: marvell,armada-370-timer
+      - enum:
+          - marvell,armada-370-timer
+          - marvell,armada-xp-timer
+
+  reg:
+    items:
+      - description: Global timer registers
+      - description: Local/private timer registers
+
+  interrupts:
+    items:
+      - description: Global timer interrupt 0
+      - description: Global timer interrupt 1
+      - description: Global timer interrupt 2
+      - description: Global timer interrupt 3
+      - description: First private timer interrupt
+      - description: Second private timer interrupt
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: nbclk
+      - const: fixed
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-375-timer
+              - marvell,armada-xp-timer
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+examples:
+  - |
+    timer@20300 {
+        compatible = "marvell,armada-xp-timer";
+        reg = <0x20300 0x30>, <0x21040 0x30>;
+        interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+        clocks = <&coreclk 2>, <&refclk>;
+        clock-names = "nbclk", "fixed";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
deleted file mode 100644
index e9c78ce880e6..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Marvell Armada 370 and Armada XP Timers
----------------------------------------
-
-Required properties:
-- compatible: Should be one of the following
-              "marvell,armada-370-timer",
-	      "marvell,armada-375-timer",
-	      "marvell,armada-xp-timer".
-- interrupts: Should contain the list of Global Timer interrupts and
-  then local timer interrupts
-- reg: Should contain location and length for timers register. First
-  pair for the Global Timer registers, second pair for the
-  local/private timers.
-
-Clocks required for compatible = "marvell,armada-370-timer":
-- clocks : Must contain a single entry describing the clock input
-
-Clocks required for compatibles = "marvell,armada-xp-timer",
-				  "marvell,armada-375-timer":
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Must include the following entries:
-  "nbclk" (L2/coherency fabric clock),
-  "fixed" (Reference 25 MHz fixed-clock).
-
-Examples:
-
-- Armada 370:
-
-	timer {
-		compatible = "marvell,armada-370-timer";
-		reg = <0x20300 0x30>, <0x21040 0x30>;
-		interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-		clocks = <&coreclk 2>;
-	};
-
-- Armada XP:
-
-	timer {
-		compatible = "marvell,armada-xp-timer";
-		reg = <0x20300 0x30>, <0x21040 0x30>;
-		interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-		clocks = <&coreclk 2>, <&refclk>;
-		clock-names = "nbclk", "fixed";
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
deleted file mode 100644
index cd1a0c256f94..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Marvell Orion SoC timer
-
-Required properties:
-- compatible: shall be "marvell,orion-timer"
-- reg: base address of the timer register starting with TIMERS CONTROL register
-- interrupts: should contain the interrupts for Timer0 and Timer1
-- clocks: phandle of timer reference clock (tclk)
-
-Example:
-	timer: timer {
-		compatible = "marvell,orion-timer";
-		reg = <0x20300 0x20>;
-		interrupt-parent = <&bridge_intc>;
-		interrupts = <1>, <2>;
-		clocks = <&core_clk 0>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.yaml
new file mode 100644
index 000000000000..f973afffa5ba
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/marvell,orion-timer.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/marvell,orion-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SoC timer
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,orion-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Timer0 interrupt
+      - description: Timer1 interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@20300 {
+        compatible = "marvell,orion-timer";
+        reg = <0x20300 0x20>;
+        interrupts = <1>, <2>;
+        clocks = <&core_clk 0>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/nxp,s32g2-stm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/nxp,s32g2-stm.yaml
new file mode 100644
index 000000000000..b44b9794bb85
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/nxp,s32g2-stm.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,s32g2-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Timer Module (STM)
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@kernel.org>
+
+description:
+  The System Timer Module supports commonly required system and application
+  software timing functions. STM includes a 32-bit count-up timer and four
+  32-bit compare channels with a separate interrupt source for each channel.
+  The timer is driven by the STM module clock divided by an 8-bit prescale
+  value.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,s32g2-stm
+      - items:
+          - const: nxp,s32g3-stm
+          - const: nxp,s32g2-stm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Counter clock
+      - description: Module clock
+      - description: Register clock
+
+  clock-names:
+    items:
+      - const: counter
+      - const: module
+      - const: register
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@4011c000 {
+        compatible = "nxp,s32g2-stm";
+        reg = <0x4011c000 0x3000>;
+        interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+        clock-names = "counter", "module", "register";
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
index 9ba858f094ab..0983c1efec80 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -26,6 +26,7 @@ properties:
           - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ostm # RZ/G2{L,LC}
           - renesas,r9a07g054-ostm # RZ/V2L
+          - renesas,r9a09g056-ostm # RZ/V2N
           - renesas,r9a09g057-ostm # RZ/V2H(P)
       - const: renesas,ostm        # Generic
 
@@ -54,12 +55,11 @@ required:
 if:
   properties:
     compatible:
-      contains:
-        enum:
-          - renesas,r9a07g043-ostm
-          - renesas,r9a07g044-ostm
-          - renesas,r9a07g054-ostm
-          - renesas,r9a09g057-ostm
+      not:
+        contains:
+          enum:
+            - renesas,r7s72100-ostm
+            - renesas,r7s9210-ostm
 then:
   required:
     - resets
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 653e2e0ca878..d85a1a088b35 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -30,6 +30,7 @@ properties:
       - items:
           - enum:
               - canaan,k210-clint       # Canaan Kendryte K210
+              - eswin,eic7700-clint     # ESWIN EIC7700
               - sifive,fu540-c000-clint # SiFive FU540
               - spacemit,k1-clint       # SpacemiT K1
               - starfive,jh7100-clint   # StarFive JH7100
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
deleted file mode 100644
index b02ab0af10ce..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Synopsys ARC Local Timer with Interrupt Capabilities
-- Found on all ARC CPUs (ARC700/ARCHS)
-- Can be optionally programmed to interrupt on Limit
-- Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically
-  TIMER0 used as clockevent provider (true for all ARC cores)
-  TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS)
-
-Required properties:
-
-- compatible : should be "snps,arc-timer"
-- interrupts : single Interrupt going into parent intc
-	       (16 for ARCHS cores, 3 for ARC700 cores)
-- clocks     : phandle to the source clock
-
-Example:
-
-	timer0 {
-		compatible = "snps,arc-timer";
-		interrupts = <3>;
-		interrupt-parent = <&core_intc>;
-		clocks = <&core_clk>;
-	};
-
-	timer1 {
-		compatible = "snps,arc-timer";
-		clocks = <&core_clk>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.yaml
new file mode 100644
index 000000000000..0d1e37db6f8e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,arc-timer.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,arc-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys ARC Local Timer
+
+maintainers:
+  - Vineet Gupta <vgupta@synopsys.com>
+
+description: >
+  Synopsys ARC Local Timer with Interrupt Capabilities
+
+    - Found on all ARC CPUs (ARC700/ARCHS)
+    - Can be optionally programmed to interrupt on Limit
+    - Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically
+      TIMER0 used as clockevent provider (true for all ARC cores)
+      TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS)
+
+properties:
+  compatible:
+    const: snps,arc-timer
+
+  interrupts:
+    maxItems: 1
+    description: A single timer interrupt going into the parent interrupt controller.
+      Use <16> for ARCHS cores, <3> for ARC700 cores.
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer0 {
+        compatible = "snps,arc-timer";
+        interrupts = <3>;
+        clocks = <&core_clk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt
deleted file mode 100644
index b6cd1b3922de..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Synopsys ARC Free Running 64-bit Global Timer for ARC HS CPUs
-- clocksource provider for SMP SoC
-
-Required properties:
-
-- compatible : should be "snps,archs-gfrc"
-- clocks     : phandle to the source clock
-
-Example:
-
-	gfrc {
-		compatible = "snps,archs-gfrc";
-		clocks = <&core_clk>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.yaml
new file mode 100644
index 000000000000..fb16f4aba1c5
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-gfrc.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,archs-gfrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys ARC Free Running 64-bit Global Timer for ARC HS CPUs
+
+maintainers:
+  - Vineet Gupta <vgupta@synopsys.com>
+
+properties:
+  compatible:
+    const: snps,archs-gfrc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer {
+        compatible = "snps,archs-gfrc";
+        clocks = <&core_clk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt
deleted file mode 100644
index 47bd7a702f3f..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Synopsys ARC Free Running 64-bit Local Timer for ARC HS CPUs
-- clocksource provider for UP SoC
-
-Required properties:
-
-- compatible : should be "snps,archs-rtc"
-- clocks     : phandle to the source clock
-
-Example:
-
-	rtc {
-		compatible = "snps,arc-rtc";
-		clocks = <&core_clk>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.yaml
new file mode 100644
index 000000000000..7478810eb24a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/snps,archs-rtc.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,archs-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys ARC Free Running 64-bit Local Timer for ARC HS CPUs
+
+maintainers:
+  - Vineet Gupta <vgupta@synopsys.com>
+
+properties:
+  compatible:
+    const: snps,archs-rtc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc {
+      compatible = "snps,archs-rtc";
+      clocks = <&core_clk>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
deleted file mode 100644
index ac44c4b67530..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Milbeaut SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be "socionext,milbeaut-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : The interrupt of the first timer.
-- clocks: phandle to the input clk.
-
-Example:
-
-timer {
-	compatible = "socionext,milbeaut-timer";
-	reg = <0x1e000050 0x20>
-	interrupts = <0 91 4>;
-	clocks = <&clk 4>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml
new file mode 100644
index 000000000000..9ab72b762314
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/socionext,milbeaut-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Timer Controller
+
+maintainers:
+  - Sugaya Taichi <sugaya.taichi@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,milbeaut-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@1e000050 {
+        compatible = "socionext,milbeaut-timer";
+        reg = <0x1e000050 0x20>;
+        interrupts = <0 91 4>;
+        clocks = <&clk 4>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.txt
deleted file mode 100644
index b5238a07da17..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* SPEAr ARM Timer
-
-** Timer node required properties:
-
-- compatible : Should be:
-	"st,spear-timer"
-- reg: Address range of the timer registers
-- interrupt: Should contain the timer interrupt number
-
-Example:
-
-	timer@f0000000 {
-		compatible = "st,spear-timer";
-		reg = <0xf0000000 0x400>;
-		interrupts = <2>;
-	};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.yaml
new file mode 100644
index 000000000000..9f26b5f2b38a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/st,spear-timer.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/st,spear-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPEAr ARM Timer
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+
+properties:
+  compatible:
+    const: st,spear-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@f0000000 {
+        compatible = "st,spear-timer";
+        reg = <0xf0000000 0x400>;
+        interrupts = <2>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
index 2e92bcdeb423..4ed30efe4052 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - sophgo,sg2042-aclint-mtimer
+          - sophgo,sg2044-aclint-mtimer
       - const: thead,c900-aclint-mtimer
 
   reg:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
deleted file mode 100644
index d3905a5412b8..000000000000
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Device tree bindings for Texas instruments Keystone timer
-
-This document provides bindings for the 64-bit timer in the KeyStone
-architecture devices. The timer can be configured as a general-purpose 64-bit
-timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
-timers, each half can operate in conjunction (chain mode) or independently
-(unchained mode) of each other.
-
-It is global timer is a free running up-counter and can generate interrupt
-when the counter reaches preset counter values.
-
-Documentation:
-https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
-
-Required properties:
-
-- compatible : should be "ti,keystone-timer".
-- reg : specifies base physical address and count of the registers.
-- interrupts : interrupt generated by the timer.
-- clocks : the clock feeding the timer clock.
-
-Example:
-
-timer@22f0000 {
-	compatible = "ti,keystone-timer";
-	reg = <0x022f0000 0x80>;
-	interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clktimer15>;
-};
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.yaml
new file mode 100644
index 000000000000..1caf5ce64f01
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/timer/ti,keystone-timer.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,keystone-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone timer
+
+maintainers:
+  - Alexander A. Klimov <grandmaster@al2klimov.de>
+  - Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+
+description: >
+  A 64-bit timer in the KeyStone architecture devices. The timer can be
+  configured as a general-purpose 64-bit timer, dual general-purpose 32-bit
+  timers. When configured as dual 32-bit timers, each half can operate in
+  conjunction (chain mode) or independently (unchained mode) of each other.
+
+  It is global timer is a free running up-counter and can generate interrupt
+  when the counter reaches preset counter values.
+
+  Documentation:
+  https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+properties:
+  compatible:
+    const: ti,keystone-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: irq
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: timer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@22f0000 {
+        compatible = "ti,keystone-timer";
+        reg = <0x022f0000 0x80>;
+        interrupts = <110 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clktimer15>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/trivial-devices.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
index 8da408107e55..27930708ccd5 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -85,6 +85,8 @@ properties:
           - devantech,srf08
             # Devantech SRF10 ultrasonic ranger
           - devantech,srf10
+            # DFRobot SEN0322 oxygen sensor
+          - dfrobot,sen0322
             # DH electronics GmbH on-board CPLD trivial SPI device
           - dh,dhcom-board
             # DA9053: flexible system level PMIC with multicore support
@@ -173,6 +175,8 @@ properties:
           - maxim,ds3502
             # Temperature Sensor, I2C interface
           - maxim,max1619
+            # Digital temperature sensor with 0.1°C accuracy
+          - maxim,max30208
             # 3-Channel Remote Temperature Sensor
           - maxim,max31730
             # 10-bit 10 kOhm linear programmable voltage divider
@@ -293,8 +297,6 @@ properties:
           - mps,mp5990
             # Monolithic Power Systems Inc. digital step-down converter mp9941
           - mps,mp9941
-            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
-          - mps,mpq8785
             # Temperature sensor with integrated fan control
           - national,lm63
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
@@ -343,6 +345,8 @@ properties:
           - sensortek,stk8ba50
             # SGX Sensortech VZ89X Sensors
           - sgx,vz89x
+            # SGX Sensortech VZ89TE Sensors
+          - sgx,vz89te
             # Silicon Labs EM3581 Zigbee SoC with SPI interface
           - silabs,em3581
             # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index a03fff5df5ef..6c6043d9809e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -43,6 +43,7 @@ properties:
           - qcom,sm8450-ufshc
           - qcom,sm8550-ufshc
           - qcom,sm8650-ufshc
+          - qcom,sm8750-ufshc
       - const: qcom,ufshc
       - const: jedec,ufs-2.0
 
@@ -158,6 +159,7 @@ allOf:
               - qcom,sm8450-ufshc
               - qcom,sm8550-ufshc
               - qcom,sm8650-ufshc
+              - qcom,sm8750-ufshc
     then:
       properties:
         clocks:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
index d2a7d2ecf48a..10020af15afc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
@@ -42,6 +42,9 @@ properties:
 
   phy_type: true
 
+  iommus:
+    maxItems: 1
+
   itc-setting:
     description:
       interrupt threshold control register control, the setting should be
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
index 8f6136f5d72e..51014955ab3c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
@@ -41,6 +41,7 @@ properties:
               - fsl,imx8mm-usb
               - fsl,imx8mn-usb
               - fsl,imx93-usb
+              - fsl,imx95-usb
           - const: fsl,imx7d-usb
           - const: fsl,imx27-usb
       - items:
@@ -54,7 +55,11 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: USB controller interrupt or combine USB controller
+                     and wakeup interrupts.
+      - description: Wakeup interrupt
 
   clocks:
     minItems: 1
@@ -191,6 +196,7 @@ allOf:
           contains:
             enum:
               - fsl,imx93-usb
+              - fsl,imx95-usb
     then:
       properties:
         clocks:
@@ -238,6 +244,22 @@ allOf:
           maxItems: 1
         clock-names: false
 
+  # imx95 soc use two interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
index 1033b7a4b8f9..d6eac1213228 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -14,9 +14,22 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - usb4b4,6504
-      - usb4b4,6506
+    oneOf:
+      - enum:
+          - usb4b4,6504
+          - usb4b4,6506
+      - items:
+          - enum:
+              - usb4b4,6500
+              - usb4b4,6508
+          - const: usb4b4,6504
+      - items:
+          - enum:
+              - usb4b4,6502
+              - usb4b4,6503
+              - usb4b4,6507
+              - usb4b4,650a
+          - const: usb4b4,6506
 
   reg: true
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index 379dacacb526..36f5c644d959 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -26,6 +26,8 @@ properties:
 
   ranges: true
 
+  dma-coherent: true
+
   power-domains:
     description: specifies a phandle to PM domain provider node
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
index 0a6e7ac1b37e..019435540df0 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
@@ -34,6 +34,7 @@ properties:
               - fsl,imx8mm-usbmisc
               - fsl,imx8mn-usbmisc
               - fsl,imx8ulp-usbmisc
+              - fsl,imx95-usbmisc
           - const: fsl,imx7d-usbmisc
           - const: fsl,imx6q-usbmisc
       - items:
@@ -45,7 +46,10 @@ properties:
     maxItems: 1
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Base and length of the Wrapper module register
+      - description: Base and length of the HSIO Block Control register
 
   '#index-cells':
     const: 1
@@ -56,6 +60,23 @@ required:
   - compatible
   - reg
 
+allOf:
+  # imx95 soc needs use HSIO Block Control
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usbmisc
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 223f2abd5e59..508d958e698c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -86,6 +86,7 @@ properties:
           - nuvoton,npcm845-ehci
           - ti,ehci-omap
           - usb-ehci
+          - via,vt8500-ehci
 
   reg:
     minItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/parade,ps5511.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/parade,ps5511.yaml
new file mode 100644
index 000000000000..10d002f09db8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/parade,ps5511.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/parade,ps5511.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS5511 4+1 Port USB 3.2 Gen 1 Hub Controller
+
+maintainers:
+  - Pin-yen Lin <treapking@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - usb1da0,5511
+      - usb1da0,55a1
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for RESETB pin.
+
+  vddd11-supply:
+    description:
+      1V1 power supply to the hub
+
+  vdd33-supply:
+    description:
+      3V3 power supply to the hub
+
+  peer-hub: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@':
+        $ref: /schemas/graph.yaml#/properties/port
+
+        properties:
+          reg:
+            minimum: 1
+            maximum: 5
+
+additionalProperties:
+  properties:
+    reg:
+      minimum: 1
+      maximum: 5
+
+required:
+  - peer-hub
+
+allOf:
+  - $ref: usb-hub.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - usb1da0,55a1
+    then:
+      properties:
+        ports:
+          properties:
+            port@5: false
+
+      patternProperties:
+        '^.*@5$': false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb1da0,55a1";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 5 */
+            device@5 {
+                reg = <5>;
+                compatible = "usb123,4567";
+            };
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usb1da0,5511";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 3 */
+                port@3 {
+                    reg = <3>;
+                    endpoint {
+                        remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/parade,ps8830.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
index 935d57f5d26f..aeb33667818e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
@@ -11,8 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - parade,ps8830
+    oneOf:
+      - items:
+          - const: parade,ps8833
+          - const: parade,ps8830
+      - const: parade,ps8830
 
   reg:
     maxItems: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 64137c1619a6..a792434c59db 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -4,11 +4,22 @@
 $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm SuperSpeed DWC3 USB SoC controller
+title: Legacy Qualcomm SuperSpeed DWC3 USB SoC controller
 
 maintainers:
   - Wesley Cheng <quic_wcheng@quicinc.com>
 
+# Use the combined qcom,snps-dwc3 instead
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: qcom,dwc3
+  required:
+    - compatible
+
 properties:
   compatible:
     items:
@@ -55,6 +66,7 @@ properties:
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
           - qcom,sm8650-dwc3
+          - qcom,sm8750-dwc3
           - qcom,x1e80100-dwc3
           - qcom,x1e80100-dwc3-mp
       - const: qcom,dwc3
@@ -354,6 +366,7 @@ allOf:
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
               - qcom,sm8650-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         clocks:
@@ -497,6 +510,7 @@ allOf:
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
               - qcom,sm8650-dwc3
+              - qcom,sm8750-dwc3
     then:
       properties:
         interrupts:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
new file mode 100644
index 000000000000..8dac5eba61b4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -0,0 +1,622 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  Describes the Qualcomm USB block, based on Synopsys DWC3.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: qcom,snps-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,ipq4019-dwc3
+          - qcom,ipq5018-dwc3
+          - qcom,ipq5332-dwc3
+          - qcom,ipq5424-dwc3
+          - qcom,ipq6018-dwc3
+          - qcom,ipq8064-dwc3
+          - qcom,ipq8074-dwc3
+          - qcom,ipq9574-dwc3
+          - qcom,msm8953-dwc3
+          - qcom,msm8994-dwc3
+          - qcom,msm8996-dwc3
+          - qcom,msm8998-dwc3
+          - qcom,qcm2290-dwc3
+          - qcom,qcs404-dwc3
+          - qcom,qcs615-dwc3
+          - qcom,qcs8300-dwc3
+          - qcom,qdu1000-dwc3
+          - qcom,sa8775p-dwc3
+          - qcom,sar2130p-dwc3
+          - qcom,sc7180-dwc3
+          - qcom,sc7280-dwc3
+          - qcom,sc8180x-dwc3
+          - qcom,sc8180x-dwc3-mp
+          - qcom,sc8280xp-dwc3
+          - qcom,sc8280xp-dwc3-mp
+          - qcom,sdm660-dwc3
+          - qcom,sdm670-dwc3
+          - qcom,sdm845-dwc3
+          - qcom,sdx55-dwc3
+          - qcom,sdx65-dwc3
+          - qcom,sdx75-dwc3
+          - qcom,sm4250-dwc3
+          - qcom,sm6115-dwc3
+          - qcom,sm6125-dwc3
+          - qcom,sm6350-dwc3
+          - qcom,sm6375-dwc3
+          - qcom,sm8150-dwc3
+          - qcom,sm8250-dwc3
+          - qcom,sm8350-dwc3
+          - qcom,sm8450-dwc3
+          - qcom,sm8550-dwc3
+          - qcom,sm8650-dwc3
+          - qcom,x1e80100-dwc3
+      - const: qcom,snps-dwc3
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - cfg_noc:: System Config NOC clock.
+       - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+                60MHz for HS operation.
+       - iface:: System bus AXI clock.
+       - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+                 power mode (U3).
+       - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+                     mode. Its frequency should be 19.2MHz.
+    minItems: 1
+    maxItems: 9
+
+  clock-names:
+    minItems: 1
+    maxItems: 9
+
+  dma-coherent: true
+
+  iommus:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: usb-ddr
+      - const: apps-usb
+
+  interrupts:
+    description: |
+      Different types of interrupts are used based on HS PHY used on target:
+        - dwc_usb3: Core DWC3 interrupt
+        - pwr_event: Used for wakeup based on other power events.
+        - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+                       hs_phy_irq which is not triggered by default and its
+                       functionality is mutually exclusive to that of
+                       {dp/dm}_hs_phy_irq and qusb2_phy_irq.
+        - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
+                      expose only a single IRQ whose behavior can be modified
+                      by the QUSB2PHY_INTR_CTRL register. The required DPSE/
+                      DMSE configuration is done in QUSB2PHY_INTR_CTRL register
+                      of PHY address space.
+        - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
+                               DM pads of the SoC. These are used for wakeup
+                               only on SoCs with non-QUSB2 targets with
+                               exception of SDM670/SDM845/SM6350.
+        - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
+    minItems: 3
+    maxItems: 19
+
+  interrupt-names:
+    minItems: 3
+    maxItems: 19
+
+  qcom,select-utmi-as-pipe-clk:
+    description:
+      If present, disable USB3 pipe_clk requirement.
+      Used when dwc3 operates without SSPHY and only
+      HS/FS/LS modes are supported.
+    type: boolean
+
+  wakeup-source: true
+
+# Required child node:
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - $ref: snps,dwc3-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq5332-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-dwc3
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master/Core clock, has to be >= 125 MHz
+                for SS operation and >= 60MHz for HS operation.
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-dwc3
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,qcs8300-dwc3
+              - qcom,sa8775p-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
+              - qcom,sm6350-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-dwc3
+              - qcom,qdu1000-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+              - qcom,sc8280xp-dwc3-mp
+              - qcom,x1e80100-dwc3
+              - qcom,x1e80100-dwc3-mp
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: noc_aggr
+            - const: noc_aggr_north
+            - const: noc_aggr_south
+            - const: noc_sys
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 5
+        clock-names:
+          oneOf:
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: iface
+                - const: sleep
+                - const: mock_utmi
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-dwc3
+              - qcom,qcs615-dwc3
+              - qcom,sar2130p-dwc3
+              - qcom,sc8180x-dwc3
+              - qcom,sc8180x-dwc3-mp
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8350-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          minItems: 5
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-dwc3
+              - qcom,ipq6018-dwc3
+              - qcom,ipq8074-dwc3
+              - qcom,msm8953-dwc3
+              - qcom,msm8998-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: dwc_usb3
+            - const: pwr_event
+            - const: qusb2_phy
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-dwc3
+              - qcom,qcs404-dwc3
+              - qcom,sdm660-dwc3
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 5
+        interrupt-names:
+          minItems: 4
+          items:
+            - const: dwc_usb3
+            - const: pwr_event
+            - const: qusb2_phy
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: dwc_usb3
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          items:
+            - const: dwc_usb3
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs615-dwc3
+              - qcom,qcs8300-dwc3
+              - qcom,qdu1000-dwc3
+              - qcom,sa8775p-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sc8180x-dwc3
+              - qcom,sc8280xp-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+          maxItems: 6
+        interrupt-names:
+          minItems: 5
+          items:
+            - const: dwc_usb3
+            - const: pwr_event
+            - const: hs_phy_irq
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-dwc3-mp
+              - qcom,x1e80100-dwc3-mp
+    then:
+      properties:
+        interrupts:
+          minItems: 11
+          maxItems: 11
+        interrupt-names:
+          items:
+            - const: dwc_usb3
+            - const: pwr_event_1
+            - const: pwr_event_2
+            - const: hs_phy_1
+            - const: hs_phy_2
+            - const: dp_hs_phy_1
+            - const: dm_hs_phy_1
+            - const: dp_hs_phy_2
+            - const: dm_hs_phy_2
+            - const: ss_phy_1
+            - const: ss_phy_2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3-mp
+    then:
+      properties:
+        interrupts:
+          minItems: 19
+          maxItems: 19
+        interrupt-names:
+          items:
+            - const: dwc_usb3
+            - const: pwr_event_1
+            - const: pwr_event_2
+            - const: pwr_event_3
+            - const: pwr_event_4
+            - const: hs_phy_1
+            - const: hs_phy_2
+            - const: hs_phy_3
+            - const: hs_phy_4
+            - const: dp_hs_phy_1
+            - const: dm_hs_phy_1
+            - const: dp_hs_phy_2
+            - const: dm_hs_phy_2
+            - const: dp_hs_phy_3
+            - const: dm_hs_phy_3
+            - const: dp_hs_phy_4
+            - const: dm_hs_phy_4
+            - const: ss_phy_1
+            - const: ss_phy_2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@a600000 {
+            compatible = "qcom,sdm845-dwc3", "qcom,snps-dwc3";
+            reg = <0 0x0a600000 0 0x100000>;
+
+            clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                     <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+            clock-names = "cfg_noc",
+                          "core",
+                          "iface",
+                          "sleep",
+                          "mock_utmi";
+
+            assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                          <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+            assigned-clock-rates = <19200000>, <150000000>;
+
+            interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
+                         <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "dwc_usb3", "pwr_event", "hs_phy_irq",
+                          "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
+
+            power-domains = <&gcc USB30_PRIM_GDSC>;
+
+            resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+            iommus = <&apps_smmu 0x740 0>;
+            snps,dis_u2_susphy_quirk;
+            snps,dis_enblslpm_quirk;
+            phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+            phy-names = "usb2-phy", "usb3-phy";
+        };
+    };
+...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
index 6577a61cc075..a020afaf2d6e 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Matthias Kaehlcke <mka@chromium.org>
 
 allOf:
-  - $ref: usb-device.yaml#
+  - $ref: usb-hub.yaml#
 
 properties:
   compatible:
@@ -19,61 +19,35 @@ properties:
           - usbbda,5411
           - usbbda,411
 
-  reg: true
-
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
 
-  peer-hub:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      phandle to the peer hub on the controller.
+  peer-hub: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          1st downstream facing USB port
-
-      port@2:
+    patternProperties:
+      '^port@':
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          2nd downstream facing USB port
 
-      port@3:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          3rd downstream facing USB port
+        properties:
+          reg:
+            minimum: 1
+            maximum: 4
 
-      port@4:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          4th downstream facing USB port
-
-patternProperties:
-  '^.*@[1-4]$':
-    description: The hard wired USB devices
-    type: object
-    $ref: /schemas/usb/usb-device.yaml
-    additionalProperties: true
+additionalProperties:
+  properties:
+    reg:
+      minimum: 1
+      maximum: 4
 
 required:
   - peer-hub
   - compatible
   - reg
 
-additionalProperties: false
-
 examples:
   - |
     usb {
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index 980f325341d4..6f4d41ba6ca7 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -27,6 +27,7 @@ properties:
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
               - renesas,usbhs-r9a08g045 # RZ/G3S
+              - renesas,usbhs-r9a09g057 # RZ/V2H(P)
           - const: renesas,rzg2l-usbhs
 
       - items:
@@ -127,11 +128,7 @@ allOf:
       properties:
         compatible:
           contains:
-            enum:
-              - renesas,usbhs-r9a07g043
-              - renesas,usbhs-r9a07g044
-              - renesas,usbhs-r9a07g054
-              - renesas,usbhs-r9a08g045
+            const: renesas,rzg2l-usbhs
     then:
       properties:
         interrupts:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index fba2cb05ecba..fd1b13c0ed6b 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -18,7 +18,7 @@ description:
   Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
 
   Type-C PHY
-  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+  Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
 
 select:
   properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
index 256bee2a03ca..6d39e5066944 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -14,11 +14,13 @@ properties:
     oneOf:
       - enum:
           - google,gs101-dwusb3
+          - samsung,exynos2200-dwusb3
           - samsung,exynos5250-dwusb3
           - samsung,exynos5433-dwusb3
           - samsung,exynos7-dwusb3
           - samsung,exynos7870-dwusb3
           - samsung,exynos850-dwusb3
+          - samsung,exynosautov920-dwusb3
       - items:
           - const: samsung,exynos990-dwusb3
           - const: samsung,exynos850-dwusb3
@@ -79,6 +81,19 @@ allOf:
       required:
         - vdd10-supply
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-dwusb3
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: link_aclk
+
   - if:
       properties:
         compatible:
@@ -165,6 +180,21 @@ allOf:
       required:
         - vdd10-supply
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: ref
+            - const: susp_clk
+
 additionalProperties: false
 
 examples:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
index 6156dc26e65c..18e35122dc1f 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -106,54 +106,54 @@ additionalProperties: false
 
 examples:
   - |
-      i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          usb-hub@8 {
-              compatible = "smsc,usb3503";
-              reg = <0x08>;
-              connect-gpios = <&gpx3 0 1>;
-              disabled-ports = <2 3>;
-              intn-gpios = <&gpx3 4 1>;
-              reset-gpios = <&gpx3 5 1>;
-              initial-mode = <1>;
-              clocks = <&clks 80>;
-              clock-names = "refclk";
-          };
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb-hub@8 {
+            compatible = "smsc,usb3503";
+            reg = <0x08>;
+            connect-gpios = <&gpx3 0 1>;
+            disabled-ports = <2 3>;
+            intn-gpios = <&gpx3 4 1>;
+            reset-gpios = <&gpx3 5 1>;
+            initial-mode = <1>;
+            clocks = <&clks 80>;
+            clock-names = "refclk";
+        };
+    };
 
   - |
-      i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          usb-hub@8 {
-              compatible = "smsc,usb3803";
-              reg = <0x08>;
-              connect-gpios = <&gpx3 0 1>;
-              disabled-ports = <2 3>;
-              intn-gpios = <&gpx3 4 1>;
-              reset-gpios = <&gpx3 5 1>;
-              bypass-gpios = <&gpx3 6 1>;
-              initial-mode = <3>;
-              clocks = <&clks 80>;
-              clock-names = "refclk";
-          };
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb-hub@8 {
+            compatible = "smsc,usb3803";
+            reg = <0x08>;
+            connect-gpios = <&gpx3 0 1>;
+            disabled-ports = <2 3>;
+            intn-gpios = <&gpx3 4 1>;
+            reset-gpios = <&gpx3 5 1>;
+            bypass-gpios = <&gpx3 6 1>;
+            initial-mode = <3>;
+            clocks = <&clks 80>;
+            clock-names = "refclk";
+        };
+    };
 
   - |
-      #include <dt-bindings/gpio/gpio.h>
-
-      usb-hub {
-          /* I2C is not connected */
-          compatible = "smsc,usb3503";
-          initial-mode = <1>; /* initialize in HUB mode */
-          disabled-ports = <1>;
-          intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-          reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
-          connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
-          refclk-frequency = <19200000>;
-      };
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb-hub {
+        /* I2C is not connected */
+        compatible = "smsc,usb3503";
+        initial-mode = <1>; /* initialize in HUB mode */
+        disabled-ports = <1>;
+        intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+        reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+        connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+        refclk-frequency = <19200000>;
+    };
 
 ...
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
index 71249b6ba616..6c0b8b653824 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
@@ -390,6 +390,12 @@ properties:
     maximum: 8
     default: 1
 
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Connector for dual role switch
+    type: object
+    unevaluatedProperties: false
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/ti,usb8041.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
index bce730a5e237..5e3eae9c2961 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI USB8041 USB 3.0 hub controller
+title: TI USB8041 and USB8044 USB 3.0 hub controllers
 
 maintainers:
   - Alexander Stein <alexander.stein@ew.tq-group.com>
@@ -17,6 +17,8 @@ properties:
     enum:
       - usb451,8140
       - usb451,8142
+      - usb451,8440
+      - usb451,8442
 
   reg: true
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/usb-device.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-device.yaml
index c67695681033..09fceb469f10 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/usb-device.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-device.yaml
@@ -28,7 +28,8 @@ description: |
 
 properties:
   compatible:
-    pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
+    contains:
+      pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
     description: Device nodes or combined nodes.
       "usbVID,PID", where VID is the vendor id and PID the product id.
       The textual representation of VID and PID shall be in lower case
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/usb-hub.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-hub.yaml
new file mode 100644
index 000000000000..5238ab105763
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-hub.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-hub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Hub
+
+maintainers:
+  - Pin-yen Lin <treapking@chromium.org>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  '#address-cells':
+    const: 1
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      The downstream facing USB ports
+
+    patternProperties:
+      "^port@[1-9a-f][0-9a-f]*$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+patternProperties:
+  '^.*@[1-9a-f][0-9a-f]*$':
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb123,4567";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 5 */
+            device@5 {
+                reg = <5>;
+                compatible = "usb765,4321";
+            };
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usb123,abcd";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 3 */
+                port@3 {
+                    reg = <3>;
+                    endpoint {
+                        remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
+        };
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml
index da76118e73a5..896201912630 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/usb/usb-switch.yaml
@@ -26,11 +26,24 @@ properties:
     type: boolean
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
     description:
       A port node to link the device to a TypeC controller for the purpose of
       handling altmode muxing and orientation switching.
 
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+        properties:
+          data-lanes:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 8
+            uniqueItems: true
+            items:
+              maximum: 8
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 86f6a19b28ae..5d2a7a8d3ac6 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -129,6 +129,8 @@ patternProperties:
     description: Andes Technology Corporation
   "^anvo,.*":
     description: Anvo-Systems Dresden GmbH
+  "^aoly,.*":
+    description: Shenzhen Aoly Technology Co., Ltd.
   "^aosong,.*":
     description: Guangzhou Aosong Electronic Co., Ltd.
   "^apm,.*":
@@ -432,6 +434,8 @@ patternProperties:
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^econet,.*":
+    description: EcoNet (HK) Limited
   "^edgeble,.*":
     description: Edgeble AI Technologies Pvt. Ltd.
   "^edimax,.*":
@@ -864,6 +868,8 @@ patternProperties:
     description: Linux-specific binding
   "^linx,.*":
     description: Linx Technologies
+  "^liontron,.*":
+    description: Shenzhen Liontron Technology Co., Ltd
   "^liteon,.*":
     description: LITE-ON Technology Corp.
   "^litex,.*":
@@ -1158,6 +1164,8 @@ patternProperties:
     description: Parallax Inc.
   "^pda,.*":
     description: Precision Design Associates, Inc.
+  "^pegatron,.*":
+    description: Pegatron Corporation
   "^pericom,.*":
     description: Pericom Technology Inc.
   "^pervasive,.*":
@@ -1262,6 +1270,8 @@ patternProperties:
     description: Renesas Electronics Corporation
   "^rervision,.*":
     description: Shenzhen Rervision Technology Co., Ltd.
+  "^retronix,.*":
+    description: Retronix Technology Inc.
   "^revotics,.*":
     description: Revolution Robotics, Inc. (Revotics)
   "^rex,.*":
@@ -1396,6 +1406,8 @@ patternProperties:
     description: SKOV A/S
   "^skyworks,.*":
     description: Skyworks Solutions, Inc.
+  "^smartfiber,.*":
+    description: ShenZhen Smartfiber Technology Co, Ltd.
   "^smartlabs,.*":
     description: SmartLabs LLC
   "^smartrg,.*":
@@ -1494,6 +1506,8 @@ patternProperties:
     description: Toby Churchill Ltd.
   "^tcs,.*":
     description: Shenzhen City Tang Cheng Technology Co., Ltd.
+  "^tcu,.*":
+    description: TC Unterhaltungselektronik AG
   "^tdo,.*":
     description: Shangai Top Display Optoelectronics Co., Ltd
   "^team-source-display,.*":
@@ -1607,6 +1621,8 @@ patternProperties:
     description: Universal Scientific Industrial Co., Ltd.
   "^usr,.*":
     description: U.S. Robotics Corporation
+  "^ultratronik,.*":
+    description: Ultratronik GmbH
   "^utoo,.*":
     description: Aigo Digital Technology Co., Ltd.
   "^v3,.*":
@@ -1689,6 +1705,8 @@ patternProperties:
     description: Wingtech Technology Co., Ltd.
   "^winlink,.*":
     description: WinLink Co., Ltd
+  "^winsen,.*":
+    description: Winsen Corp.
   "^winstar,.*":
     description: Winstar Display Corp.
   "^wirelesstag,.*":
@@ -1749,6 +1767,8 @@ patternProperties:
     description: Y Soft Corporation a.s.
   "^yuridenki,.*":
     description: Yuridenki-Shokai Co. Ltd.
+  "^yuzukihd,.*":
+    description: YuzukiHD Open Source Hardware
   "^zarlink,.*":
     description: Zarlink Semiconductor
   "^zealz,.*":
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/virtio/pci-iommu.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
index 972a785a42de..8bd6ad72ac7a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
@@ -20,6 +20,9 @@ description: |
   virtio-iommu node doesn't have an "iommus" property, and is omitted from
   the iommu-map property of the root complex.
 
+allOf:
+  - $ref: /schemas/pci/pci-device.yaml#
+
 properties:
   # If compatible is present, it should contain the vendor and device ID
   # according to the PCI Bus Binding specification. Since PCI provides
@@ -33,12 +36,7 @@ properties:
           - const: pci1af4,1057
 
   reg:
-    description: |
-      PCI address of the IOMMU. As defined in the PCI Bus Binding
-      reference, the reg property is a five-cell address encoded as (phys.hi
-      phys.mid phys.lo size.hi size.lo). phys.hi should contain the device's
-      BDF as 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be
-      zero. See Documentation/devicetree/bindings/pci/pci.txt
+    maxItems: 1
 
   '#iommu-cells':
     const: 1
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
index 8b7aa922249b..1d9f15ec6657 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
@@ -20,6 +20,7 @@ properties:
     items:
       - enum:
           - fsl,imx8dxl-sc-wdt
+          - fsl,imx8qm-sc-wdt
           - fsl,imx8qxp-sc-wdt
       - const: fsl,imx-sc-wdt
 
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
index 0da953cb7127..8a6c3a75a547 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
@@ -35,6 +35,7 @@ properties:
               - fsl,imx8mp-wdt
               - fsl,imx8mq-wdt
               - fsl,ls1012a-wdt
+              - fsl,ls1021a-wdt
               - fsl,ls1043a-wdt
               - fsl,vf610-wdt
           - const: fsl,imx21-wdt
@@ -102,6 +103,7 @@ allOf:
             contains:
               enum:
                 - fsl,ls1012a-wdt
+                - fsl,ls1021a-wdt
                 - fsl,ls1043a-wdt
     then:
       properties:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/nxp,s32g2-swt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/nxp,s32g2-swt.yaml
new file mode 100644
index 000000000000..8f168a05b50c
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/nxp,s32g2-swt.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nxp,s32g2-swt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Software Watchdog Timer (SWT)
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@kernel.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,s32g2-swt
+      - items:
+          - const: nxp,s32g3-swt
+          - const: nxp,s32g2-swt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Counter clock
+      - description: Module clock
+      - description: Register clock
+
+  clock-names:
+    items:
+      - const: counter
+      - const: module
+      - const: register
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@40100000 {
+        compatible = "nxp,s32g2-swt";
+        reg = <0x40100000 0x1000>;
+        clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3c>;
+        clock-names = "counter", "module", "register";
+        timeout-sec = <10>;
+    };
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index 3e0a8747a357..78874b90c88c 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -76,7 +76,9 @@ properties:
           - const: renesas,rcar-gen4-wdt # R-Car Gen4
 
       - items:
-          - const: renesas,r9a09g047-wdt # RZ/G3E
+          - enum:
+              - renesas,r9a09g047-wdt # RZ/G3E
+              - renesas,r9a09g056-wdt # RZ/V2N
           - const: renesas,r9a09g057-wdt # RZ/V2H(P)
 
       - const: renesas,r9a09g057-wdt       # RZ/V2H(P)
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index d175ae968336..53fc64f5b56d 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -25,6 +25,7 @@ properties:
           - samsung,exynos5420-wdt                # for Exynos5420
           - samsung,exynos7-wdt                   # for Exynos7
           - samsung,exynos850-wdt                 # for Exynos850
+          - samsung,exynos990-wdt                 # for Exynos990
           - samsung,exynosautov9-wdt              # for Exynosautov9
           - samsung,exynosautov920-wdt            # for Exynosautov920
       - items:
@@ -49,14 +50,14 @@ properties:
   samsung,cluster-index:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      Index of CPU cluster on which watchdog is running (in case of Exynos850
-      or Google gs101).
+      Index of CPU cluster on which watchdog is running (in case of Exynos850,
+      Exynos990 or Google gs101).
 
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the PMU system controller node (in case of Exynos5250,
-      Exynos5420, Exynos7, Exynos850 and gs101).
+      Exynos5420, Exynos7, Exynos850, Exynos990 and gs101).
 
 required:
   - compatible
@@ -77,6 +78,7 @@ allOf:
               - samsung,exynos5420-wdt
               - samsung,exynos7-wdt
               - samsung,exynos850-wdt
+              - samsung,exynos990-wdt
               - samsung,exynosautov9-wdt
               - samsung,exynosautov920-wdt
     then:
@@ -89,6 +91,7 @@ allOf:
             enum:
               - google,gs101-wdt
               - samsung,exynos850-wdt
+              - samsung,exynos990-wdt
               - samsung,exynosautov9-wdt
               - samsung,exynosautov920-wdt
     then:
@@ -102,7 +105,7 @@ allOf:
             - const: watchdog
             - const: watchdog_src
         samsung,cluster-index:
-          enum: [0, 1]
+          enum: [0, 1, 2]
       required:
         - samsung,cluster-index
     else:
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 1efefd741c06..ef088e0f6917 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -28,6 +28,7 @@ properties:
               - rockchip,rk3328-wdt
               - rockchip,rk3368-wdt
               - rockchip,rk3399-wdt
+              - rockchip,rk3562-wdt
               - rockchip,rk3568-wdt
               - rockchip,rk3576-wdt
               - rockchip,rk3588-wdt
diff --git linux-libre-6.15-gnu/Documentation/devicetree/bindings/writing-schema.rst linux-libre-6.16-gnu/Documentation/devicetree/bindings/writing-schema.rst
index eb8ced400c7e..fc73072f12fc 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/bindings/writing-schema.rst
+++ linux-libre-6.16-gnu/Documentation/devicetree/bindings/writing-schema.rst
@@ -117,9 +117,14 @@ additionalProperties / unevaluatedProperties
       should be allowed.
 
   * additionalProperties: true
-      Rare case, used for schemas implementing common set of properties. Such
-      schemas are supposed to be referenced by other schemas, which then use
-      'unevaluatedProperties: false'.  Typically bus or common-part schemas.
+      - Top-level part:
+        Rare case, used for schemas implementing common set of properties. Such
+        schemas are supposed to be referenced by other schemas, which then use
+        'unevaluatedProperties: false'.  Typically bus or common-part schemas.
+      - Nested node:
+        When listing only the expected compatible of the nested node and there
+        is an another schema matching that compatible which ends with one of
+        two above cases ('false').
 
 examples
   Optional. A list of one or more DTS hunks implementing this binding only.
diff --git linux-libre-6.15-gnu/Documentation/devicetree/overlay-notes.rst linux-libre-6.16-gnu/Documentation/devicetree/overlay-notes.rst
index e139f22b363e..35e79242af9a 100644
--- linux-libre-6.15-gnu/Documentation/devicetree/overlay-notes.rst
+++ linux-libre-6.16-gnu/Documentation/devicetree/overlay-notes.rst
@@ -38,10 +38,10 @@ Lets take an example where we have a foo board with the following base tree::
 	};
     ---- foo.dts ---------------------------------------------------------------
 
-The overlay bar.dts,
+The overlay bar.dtso,
 ::
 
-    ---- bar.dts - overlay target location by label ----------------------------
+    ---- bar.dtso - overlay target location by label ---------------------------
 	/dts-v1/;
 	/plugin/;
 	&ocp {
@@ -51,7 +51,7 @@ The overlay bar.dts,
 			... /* various properties and child nodes */
 		};
 	};
-    ---- bar.dts ---------------------------------------------------------------
+    ---- bar.dtso --------------------------------------------------------------
 
 when loaded (and resolved as described in [1]) should result in foo+bar.dts::
 
@@ -88,9 +88,9 @@ in the base DT. In this case, the target path can be provided. The target
 location by label syntax is preferred because the overlay can be applied to
 any base DT containing the label, no matter where the label occurs in the DT.
 
-The above bar.dts example modified to use target path syntax is::
+The above bar.dtso example modified to use target path syntax is::
 
-    ---- bar.dts - overlay target location by explicit path --------------------
+    ---- bar.dtso - overlay target location by explicit path -------------------
 	/dts-v1/;
 	/plugin/;
 	&{/ocp} {
@@ -100,7 +100,7 @@ The above bar.dts example modified to use target path syntax is::
 			... /* various properties and child nodes */
 		}
 	};
-    ---- bar.dts ---------------------------------------------------------------
+    ---- bar.dtso --------------------------------------------------------------
 
 
 Overlay in-kernel API
diff --git linux-libre-6.15-gnu/Documentation/doc-guide/sphinx.rst linux-libre-6.16-gnu/Documentation/doc-guide/sphinx.rst
index 8081ebfe48bc..5a91df105141 100644
--- linux-libre-6.15-gnu/Documentation/doc-guide/sphinx.rst
+++ linux-libre-6.16-gnu/Documentation/doc-guide/sphinx.rst
@@ -28,7 +28,7 @@ Sphinx Install
 ==============
 
 The ReST markups currently used by the Documentation/ files are meant to be
-built with ``Sphinx`` version 2.4.4 or higher.
+built with ``Sphinx`` version 3.4.3 or higher.
 
 There's a script that checks for the Sphinx requirements. Please see
 :ref:`sphinx-pre-install` for further details.
@@ -42,12 +42,6 @@ with your distributions. In order to do so, it is recommended to install
 Sphinx inside a virtual environment, using ``virtualenv-3``
 or ``virtualenv``, depending on how your distribution packaged Python 3.
 
-.. note::
-
-   #) It is recommended to use the RTD theme for html output. Depending
-      on the Sphinx version, it should be installed separately,
-      with ``pip install sphinx_rtd_theme``.
-
 In summary, if you want to install the latest version of Sphinx, you
 should do::
 
@@ -162,6 +156,12 @@ By default, the "Alabaster" theme is used to build the HTML documentation;
 this theme is bundled with Sphinx and need not be installed separately.
 The Sphinx theme can be overridden by using the ``DOCS_THEME`` make variable.
 
+.. note::
+
+   Some people might prefer to use the RTD theme for html output.
+   Depending on the Sphinx version, it should be installed separately,
+   with ``pip install sphinx_rtd_theme``.
+
 There is another make variable ``SPHINXDIRS``, which is useful when test
 building a subset of documentation.  For example, you can build documents
 under ``Documentation/doc-guide`` by running
diff --git linux-libre-6.15-gnu/Documentation/driver-api/basics.rst linux-libre-6.16-gnu/Documentation/driver-api/basics.rst
index d78b7c328ff7..5e9f7aee71a7 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/basics.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/basics.rst
@@ -108,6 +108,9 @@ Kernel objects manipulation
 .. kernel-doc:: lib/kobject.c
    :export:
 
+.. kernel-doc:: lib/kobject_uevent.c
+   :export:
+
 Kernel utility functions
 ------------------------
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/coco/index.rst linux-libre-6.16-gnu/Documentation/driver-api/coco/index.rst
new file mode 100644
index 000000000000..af9f08ca0cfd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/coco/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+Confidential Computing
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   measurement-registers
+
+.. only::  subproject and html
diff --git linux-libre-6.15-gnu/Documentation/driver-api/coco/measurement-registers.rst linux-libre-6.16-gnu/Documentation/driver-api/coco/measurement-registers.rst
new file mode 100644
index 000000000000..962a44efa2c0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/coco/measurement-registers.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=====================
+Measurement Registers
+=====================
+
+.. kernel-doc:: include/linux/tsm-mr.h
+   :internal:
+
+.. kernel-doc:: drivers/virt/coco/guest/tsm-mr.c
+   :export:
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/access-coordinates.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/access-coordinates.rst
deleted file mode 100644
index b07950ea30c9..000000000000
--- linux-libre-6.15-gnu/Documentation/driver-api/cxl/access-coordinates.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-.. include:: <isonum.txt>
-
-==================================
-CXL Access Coordinates Computation
-==================================
-
-Shared Upstream Link Calculation
-================================
-For certain CXL region construction with endpoints behind CXL switches (SW) or
-Root Ports (RP), there is the possibility of the total bandwidth for all
-the endpoints behind a switch being more than the switch upstream link.
-A similar situation can occur within the host, upstream of the root ports.
-The CXL driver performs an additional pass after all the targets have
-arrived for a region in order to recalculate the bandwidths with possible
-upstream link being a limiting factor in mind.
-
-The algorithm assumes the configuration is a symmetric topology as that
-maximizes performance. When asymmetric topology is detected, the calculation
-is aborted. An asymmetric topology is detected during topology walk where the
-number of RPs detected as a grandparent is not equal to the number of devices
-iterated in the same iteration loop. The assumption is made that subtle
-asymmetry in properties does not happen and all paths to EPs are equal.
-
-There can be multiple switches under an RP. There can be multiple RPs under
-a CXL Host Bridge (HB). There can be multiple HBs under a CXL Fixed Memory
-Window Structure (CFMWS).
-
-An example hierarchy:
-
->                CFMWS 0
->                  |
->         _________|_________
->        |                   |
->    ACPI0017-0          ACPI0017-1
-> GP0/HB0/ACPI0016-0   GP1/HB1/ACPI0016-1
->    |          |        |           |
->   RP0        RP1      RP2         RP3
->    |          |        |           |
->  SW 0       SW 1     SW 2        SW 3
->  |   |      |   |    |   |       |   |
-> EP0 EP1    EP2 EP3  EP4  EP5    EP6 EP7
-
-Computation for the example hierarchy:
-
-Min (GP0 to CPU BW,
-     Min(SW 0 Upstream Link to RP0 BW,
-         Min(SW0SSLBIS for SW0DSP0 (EP0), EP0 DSLBIS, EP0 Upstream Link) +
-         Min(SW0SSLBIS for SW0DSP1 (EP1), EP1 DSLBIS, EP1 Upstream link)) +
-     Min(SW 1 Upstream Link to RP1 BW,
-         Min(SW1SSLBIS for SW1DSP0 (EP2), EP2 DSLBIS, EP2 Upstream Link) +
-         Min(SW1SSLBIS for SW1DSP1 (EP3), EP3 DSLBIS, EP3 Upstream link))) +
-Min (GP1 to CPU BW,
-     Min(SW 2 Upstream Link to RP2 BW,
-         Min(SW2SSLBIS for SW2DSP0 (EP4), EP4 DSLBIS, EP4 Upstream Link) +
-         Min(SW2SSLBIS for SW2DSP1 (EP5), EP5 DSLBIS, EP5 Upstream link)) +
-     Min(SW 3 Upstream Link to RP3 BW,
-         Min(SW3SSLBIS for SW3DSP0 (EP6), EP6 DSLBIS, EP6 Upstream Link) +
-         Min(SW3SSLBIS for SW3DSP1 (EP7), EP7 DSLBIS, EP7 Upstream link))))
-
-The calculation starts at cxl_region_shared_upstream_perf_update(). A xarray
-is created to collect all the endpoint bandwidths via the
-cxl_endpoint_gather_bandwidth() function. The min() of bandwidth from the
-endpoint CDAT and the upstream link bandwidth is calculated. If the endpoint
-has a CXL switch as a parent, then min() of calculated bandwidth and the
-bandwidth from the SSLBIS for the switch downstream port that is associated
-with the endpoint is calculated. The final bandwidth is stored in a
-'struct cxl_perf_ctx' in the xarray indexed by a device pointer. If the
-endpoint is direct attached to a root port (RP), the device pointer would be an
-RP device. If the endpoint is behind a switch, the device pointer would be the
-upstream device of the parent switch.
-
-At the next stage, the code walks through one or more switches if they exist
-in the topology. For endpoints directly attached to RPs, this step is skipped.
-If there is another switch upstream, the code takes the min() of the current
-gathered bandwidth and the upstream link bandwidth. If there's a switch
-upstream, then the SSLBIS of the upstream switch.
-
-Once the topology walk reaches the RP, whether it's direct attached endpoints
-or walking through the switch(es), cxl_rp_gather_bandwidth() is called. At
-this point all the bandwidths are aggregated per each host bridge, which is
-also the index for the resulting xarray.
-
-The next step is to take the min() of the per host bridge bandwidth and the
-bandwidth from the Generic Port (GP). The bandwidths for the GP is retrieved
-via ACPI tables SRAT/HMAT. The min bandwidth are aggregated under the same
-ACPI0017 device to form a new xarray.
-
-Finally, the cxl_region_update_bandwidth() is called and the aggregated
-bandwidth from all the members of the last xarray is updated for the
-access coordinates residing in the cxl region (cxlr) context.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/allocation/dax.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/dax.rst
new file mode 100644
index 000000000000..c6f7a5da832f
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/dax.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+DAX Devices
+===========
+CXL capacity exposed as a DAX device can be accessed directly via mmap.
+Users may wish to use this interface mechanism to write their own userland
+CXL allocator, or to managed shared or persistent memory regions across multiple
+hosts.
+
+If the capacity is shared across hosts or persistent, appropriate flushing
+mechanisms must be employed unless the region supports Snoop Back-Invalidate.
+
+Note that mappings must be aligned (size and base) to the dax device's base
+alignment, which is typically 2MB - but maybe be configured larger.
+
+::
+
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <stdint.h>
+  #include <sys/mman.h>
+  #include <fcntl.h>
+  #include <unistd.h>
+
+  #define DEVICE_PATH "/dev/dax0.0" // Replace DAX device path
+  #define DEVICE_SIZE (4ULL * 1024 * 1024 * 1024) // 4GB
+
+  int main() {
+      int fd;
+      void* mapped_addr;
+
+      /* Open the DAX device */
+      fd = open(DEVICE_PATH, O_RDWR);
+      if (fd < 0) {
+          perror("open");
+          return -1;
+      }
+
+      /* Map the device into memory */
+      mapped_addr = mmap(NULL, DEVICE_SIZE, PROT_READ | PROT_WRITE,
+                         MAP_SHARED, fd, 0);
+      if (mapped_addr == MAP_FAILED) {
+          perror("mmap");
+          close(fd);
+          return -1;
+      }
+
+      printf("Mapped address: %p\n", mapped_addr);
+
+      /* You can now access the device through the mapped address */
+      uint64_t* ptr = (uint64_t*)mapped_addr;
+      *ptr = 0x1234567890abcdef; // Write a value to the device
+      printf("Value at address %p: 0x%016llx\n", ptr, *ptr);
+
+      /* Clean up */
+      munmap(mapped_addr, DEVICE_SIZE);
+      close(fd);
+      return 0;
+  }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/allocation/hugepages.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/hugepages.rst
new file mode 100644
index 000000000000..1023c6922829
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/hugepages.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Huge Pages
+==========
+
+Contiguous Memory Allocator
+===========================
+CXL Memory onlined as SystemRAM during early boot is eligible for use by CMA,
+as the NUMA node hosting that capacity will be `Online` at the time CMA
+carves out contiguous capacity.
+
+CXL Memory deferred to the CXL Driver for configuration cannot have its
+capacity allocated by CMA - as the NUMA node hosting the capacity is `Offline`
+at :code:`__init` time - when CMA carves out contiguous capacity.
+
+HugeTLB
+=======
+Different huge page sizes allow different memory configurations.
+
+2MB Huge Pages
+--------------
+All CXL capacity regardless of configuration time or memory zone is eligible
+for use as 2MB huge pages.
+
+1GB Huge Pages
+--------------
+CXL capacity onlined in :code:`ZONE_NORMAL` is eligible for 1GB Gigantic Page
+allocation.
+
+CXL capacity onlined in :code:`ZONE_MOVABLE` is not eligible for 1GB Gigantic
+Page allocation.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/allocation/page-allocator.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/page-allocator.rst
new file mode 100644
index 000000000000..7b8fe1b8d5bb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/page-allocator.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+The Page Allocator
+==================
+
+The kernel page allocator services all general page allocation requests, such
+as :code:`kmalloc`.  CXL configuration steps affect the behavior of the page
+allocator based on the selected `Memory Zone` and `NUMA node` the capacity is
+placed in.
+
+This section mostly focuses on how these configurations affect the page
+allocator (as of Linux v6.15) rather than the overall page allocator behavior.
+
+NUMA nodes and mempolicy
+========================
+Unless a task explicitly registers a mempolicy, the default memory policy
+of the linux kernel is to allocate memory from the `local NUMA node` first,
+and fall back to other nodes only if the local node is pressured.
+
+Generally, we expect to see local DRAM and CXL memory on separate NUMA nodes,
+with the CXL memory being non-local.  Technically, however, it is possible
+for a compute node to have no local DRAM, and for CXL memory to be the
+`local` capacity for that compute node.
+
+
+Memory Zones
+============
+CXL capacity may be onlined in :code:`ZONE_NORMAL` or :code:`ZONE_MOVABLE`.
+
+As of v6.15, the page allocator attempts to allocate from the highest
+available and compatible ZONE for an allocation from the local node first.
+
+An example of a `zone incompatibility` is attempting to service an allocation
+marked :code:`GFP_KERNEL` from :code:`ZONE_MOVABLE`.  Kernel allocations are
+typically not migratable, and as a result can only be serviced from
+:code:`ZONE_NORMAL` or lower.
+
+To simplify this, the page allocator will prefer :code:`ZONE_MOVABLE` over
+:code:`ZONE_NORMAL` by default, but if :code:`ZONE_MOVABLE` is depleted, it
+will fallback to allocate from :code:`ZONE_NORMAL`.
+
+
+Zone and Node Quirks
+====================
+Let's consider a configuration where the local DRAM capacity is largely onlined
+into :code:`ZONE_NORMAL`, with no :code:`ZONE_MOVABLE` capacity present. The
+CXL capacity has the opposite configuration - all onlined in
+:code:`ZONE_MOVABLE`.
+
+Under the default allocation policy, the page allocator will completely skip
+:code:`ZONE_MOVABLE` as a valid allocation target.  This is because, as of
+Linux v6.15, the page allocator does (approximately) the following: ::
+
+  for (each zone in local_node):
+
+    for (each node in fallback_order):
+
+      attempt_allocation(gfp_flags);
+
+Because the local node does not have :code:`ZONE_MOVABLE`, the CXL node is
+functionally unreachable for direct allocation.  As a result, the only way
+for CXL capacity to be used is via `demotion` in the reclaim path.
+
+This configuration also means that if the DRAM ndoe has :code:`ZONE_MOVABLE`
+capacity - when that capacity is depleted, the page allocator will actually
+prefer CXL :code:`ZONE_MOVABLE` pages over DRAM :code:`ZONE_NORMAL` pages.
+
+We may wish to invert this priority in future Linux versions.
+
+If `demotion` and `swap` are disabled, Linux will begin to cause OOM crashes
+when the DRAM nodes are depleted. See the reclaim section for more details.
+
+
+CGroups and CPUSets
+===================
+Finally, assuming CXL memory is reachable via the page allocation (i.e. onlined
+in :code:`ZONE_NORMAL`), the :code:`cpusets.mems_allowed` may be used by
+containers to limit the accessibility of certain NUMA nodes for tasks in that
+container.  Users may wish to utilize this in multi-tenant systems where some
+tasks prefer not to use slower memory.
+
+In the reclaim section we'll discuss some limitations of this interface to
+prevent demotions of shared data to CXL memory (if demotions are enabled).
+
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/allocation/reclaim.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/reclaim.rst
new file mode 100644
index 000000000000..f40f1cae391a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/allocation/reclaim.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+Reclaim
+=======
+Another way CXL memory can be utilized *indirectly* is via the reclaim system
+in :code:`mm/vmscan.c`.  Reclaim is engaged when memory capacity on the system
+becomes pressured based on global and cgroup-local `watermark` settings.
+
+In this section we won't discuss the `watermark` configurations, just how CXL
+memory can be consumed by various pieces of reclaim system.
+
+Demotion
+========
+By default, the reclaim system will prefer swap (or zswap) when reclaiming
+memory.  Enabling :code:`kernel/mm/numa/demotion_enabled` will cause vmscan
+to opportunistically prefer distant NUMA nodes to swap or zswap, if capacity
+is available.
+
+Demotion engages the :code:`mm/memory_tier.c` component to determine the
+next demotion node.  The next demotion node is based on the :code:`HMAT`
+or :code:`CDAT` performance data.
+
+cpusets.mems_allowed quirk
+--------------------------
+In Linux v6.15 and below, demotion does not respect :code:`cpusets.mems_allowed`
+when migrating pages.  As a result, if demotion is enabled, vmscan cannot
+guarantee isolation of a container's memory from nodes not set in mems_allowed.
+
+In Linux v6.XX and up, demotion does attempt to respect
+:code:`cpusets.mems_allowed`; however, certain classes of shared memory
+originally instantiated by another cgroup (such as common libraries - e.g.
+libc) may still be demoted.  As a result, the mems_allowed interface still
+cannot provide perfect isolation from the remote nodes.
+
+ZSwap and Node Preference
+=========================
+In Linux v6.15 and below, ZSwap allocates memory from the local node of the
+processor for the new pages being compressed.  Since pages being compressed
+are typically cold, the result is a cold page becomes promoted - only to
+be later demoted as it ages off the LRU.
+
+In Linux v6.XX, ZSwap tries to prefer the node of the page being compressed
+as the allocation target for the compression page.  This helps prevent
+thrashing.
+
+Demotion with ZSwap
+===================
+When enabling both Demotion and ZSwap, you create a situation where ZSwap
+will prefer the slowest form of CXL memory by default until that tier of
+memory is exhausted.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/devices/device-types.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/devices/device-types.rst
new file mode 100644
index 000000000000..f5e4330c1cfe
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/devices/device-types.rst
@@ -0,0 +1,165 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Devices and Protocols
+=====================
+
+The type of CXL device (Memory, Accelerator, etc) dictates many configuration steps. This section
+covers some basic background on device types and on-device resources used by the platform and OS
+which impact configuration.
+
+Protocols
+=========
+
+There are three core protocols to CXL.  For the purpose of this documentation,
+we will only discuss very high level definitions as the specific hardware
+details are largely abstracted away from Linux.  See the CXL specification
+for more details.
+
+CXL.io
+------
+The basic interaction protocol, similar to PCIe configuration mechanisms.
+Typically used for initialization, configuration, and I/O access for anything
+other than memory (CXL.mem) or cache (CXL.cache) operations.
+
+The Linux CXL driver exposes access to .io functionalty via the various sysfs
+interfaces and /dev/cxl/ devices (which exposes direct access to device
+mailboxes).
+
+CXL.cache
+---------
+The mechanism by which a device may coherently access and cache host memory.
+
+Largely transparent to Linux once configured.
+
+CXL.mem
+---------
+The mechanism by which the CPU may coherently access and cache device memory.
+
+Largely transparent to Linux once configured.
+
+
+Device Types
+============
+
+Type-1
+------
+
+A Type-1 CXL device:
+
+* Supports cxl.io and cxl.cache protocols
+* Implements a fully coherent cache
+* Allows Device-to-Host coherence and Host-to-Device snoops.
+* Does NOT have host-managed device memory (HDM)
+
+Typical examples of type-1 devices is a Smart NIC - which may want to
+directly operate on host-memory (DMA) to store incoming packets. These
+devices largely rely on CPU-attached memory.
+
+Type-2
+------
+
+A Type-2 CXL Device:
+
+* Supports cxl.io, cxl.cache, and cxl.mem protocols
+* Optionally implements coherent cache and Host-Managed Device Memory
+* Is typically an accelerator device w/ high bandwidth memory.
+
+The primary difference between a type-1 and type-2 device is the presence
+of host-managed device memory, which allows the device to operate on a
+local memory bank - while the CPU sill has coherent DMA to the same memory.
+
+The allows things like GPUs to expose their memory via DAX devices or file
+descriptors, allows drivers and programs direct access to device memory
+rather than use block-transfer semantics.
+
+Type-3
+------
+
+A Type-3 CXL Device
+
+* Supports cxl.io and cxl.mem
+* Implements Host-Managed Device Memory
+* May provide either Volatile or Persistent memory capacity (or both).
+
+A basic example of a type-3 device is a simple memory expander, whose
+local memory capacity is exposed to the CPU for access directly via
+basic coherent DMA.
+
+Switch
+------
+
+A CXL switch is a device capacity of routing any CXL (and by extension, PCIe)
+protocol between an upstream, downstream, or peer devices.  Many devices, such
+as Multi-Logical Devices, imply the presence of switching in some manner.
+
+Logical Devices and Heads
+-------------------------
+
+A CXL device may present one or more "Logical Devices" to one or more hosts
+(via physical "Heads").
+
+A Single-Logical Device (SLD) is a device which presents a single device to
+one or more heads.
+
+A Multi-Logical Device (MLD) is a device which may present multiple devices
+to one or more devices.
+
+A Single-Headed Device exposes only a single physical connection.
+
+A Multi-Headed Device exposes multiple physical connections.
+
+MHSLD
+~~~~~
+A Multi-Headed Single-Logical Device (MHSLD) exposes a single logical
+device to multiple heads which may be connected to one or more discrete
+hosts.  An example of this would be a simple memory-pool which may be
+statically configured (prior to boot) to expose portions of its memory
+to Linux via :doc:`CEDT <../platform/acpi/cedt>`.
+
+MHMLD
+~~~~~
+A Multi-Headed Multi-Logical Device (MHMLD) exposes multiple logical
+devices to multiple heads which may be connected to one or more discrete
+hosts.  An example of this would be a Dynamic Capacity Device or which
+may be configured at runtime to expose portions of its memory to Linux.
+
+Example Devices
+===============
+
+Memory Expander
+---------------
+The simplest form of Type-3 device is a memory expander.  A memory expander
+exposes Host-Managed Device Memory (HDM) to Linux.  This memory may be
+Volatile or Non-Volatile (Persistent).
+
+Memory Expanders will typically be considered a form of Single-Headed,
+Single-Logical Device - as its form factor will typically be an add-in-card
+(AIC) or some other similar form-factor.
+
+The Linux CXL driver provides support for static or dynamic configuration of
+basic memory expanders.  The platform may program decoders prior to OS init
+(e.g. auto-decoders), or the user may program the fabric if the platform
+defers these operations to the OS.
+
+Multiple Memory Expanders may be added to an external chassis and exposed to
+a host via a head attached to a CXL switch.  This is a "memory pool", and
+would be considered an MHSLD or MHMLD depending on the management capabilities
+provided by the switch platform.
+
+As of v6.14, Linux does not provide a formalized interface to manage non-DCD
+MHSLD or MHMLD devices.
+
+Dynamic Capacity Device (DCD)
+-----------------------------
+
+A Dynamic Capacity Device is a Type-3 device which provides dynamic management
+of memory capacity. The basic premise of a DCD to provide an allocator-like
+interface for physical memory capacity to a "Fabric Manager" (an external,
+privileged host with privileges to change configurations for other hosts).
+
+A DCD manages "Memory Extents", which may be volatile or persistent. Extents
+may also be exclusive to a single host or shared across multiple hosts.
+
+As of v6.14, Linux does not provide a formalized interface to manage DCD
+devices, however there is active work on LKML targeting future release.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/index.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/index.rst
index 965ba90e8fb7..9e1414ad3357 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/cxl/index.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/index.rst
@@ -4,12 +4,50 @@
 Compute Express Link
 ====================
 
-.. toctree::
-   :maxdepth: 1
+CXL device configuration has a complex handoff between platform (Hardware,
+BIOS, EFI), OS (early boot, core kernel, driver), and user policy decisions
+that have impacts on each other.  The docs here break up configurations steps.
 
-   memory-devices
-   access-coordinates
+.. toctree::
+   :maxdepth: 2
+   :caption: Overview
 
+   theory-of-operation
    maturity-map
 
+.. toctree::
+   :maxdepth: 2
+   :caption: Device Reference
+
+   devices/device-types
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Platform Configuration
+
+   platform/bios-and-efi
+   platform/acpi
+   platform/cdat
+   platform/example-configs
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Linux Kernel Configuration
+
+   linux/overview
+   linux/early-boot
+   linux/cxl-driver
+   linux/dax-driver
+   linux/memory-hotplug
+   linux/access-coordinates
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Memory Allocation
+
+   allocation/dax
+   allocation/page-allocator
+   allocation/reclaim
+   allocation/hugepages.rst
+
 .. only::  subproject and html
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/access-coordinates.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/access-coordinates.rst
new file mode 100644
index 000000000000..341a7c682043
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/access-coordinates.rst
@@ -0,0 +1,178 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==================================
+CXL Access Coordinates Computation
+==================================
+
+Latency and Bandwidth Calculation
+=================================
+A memory region performance coordinates (latency and bandwidth) are typically
+provided via ACPI tables :doc:`SRAT <../platform/acpi/srat>` and
+:doc:`HMAT <../platform/acpi/hmat>`. However, the platform firmware (BIOS) is
+not able to annotate those for CXL devices that are hot-plugged since they do
+not exist during platform firmware initialization. The CXL driver can compute
+the performance coordinates by retrieving data from several components.
+
+The :doc:`SRAT <../platform/acpi/srat>` provides a Generic Port Affinity
+subtable that ties a proximity domain to a device handle, which in this case
+would be the CXL hostbridge. Using this association, the performance
+coordinates for the Generic Port can be retrieved from the
+:doc:`HMAT <../platform/acpi/hmat>` subtable. This piece represents the
+performance coordinates between a CPU and a Generic Port (CXL hostbridge).
+
+The :doc:`CDAT <../platform/cdat>` provides the performance coordinates for
+the CXL device itself. That is the bandwidth and latency to access that device's
+memory region. The DSMAS subtable provides a DSMADHandle that is tied to a
+Device Physical Address (DPA) range. The DSLBIS subtable provides the
+performance coordinates that's tied to a DSMADhandle and this ties the two
+table entries together to provide the performance coordinates for each DPA
+region. For example, if a device exports a DRAM region and a PMEM region,
+then there would be different performance characteristsics for each of those
+regions.
+
+If there's a CXL switch in the topology, then the performance coordinates for the
+switch is provided by SSLBIS subtable. This provides the bandwidth and latency
+for traversing the switch between the switch upstream port and the switch
+downstream port that points to the endpoint device.
+
+Simple topology example::
+
+ GP0/HB0/ACPI0016-0
+        RP0
+         |
+         | L0
+         |
+     SW 0 / USP0
+     SW 0 / DSP0
+         |
+         | L1
+         |
+        EP0
+
+In this example, there is a CXL switch between an endpoint and a root port.
+Latency in this example is calculated as such:
+L(EP0) - Latency from EP0 CDAT DSMAS+DSLBIS
+L(L1) - Link latency between EP0 and SW0DSP0
+L(SW0) - Latency for the switch from SW0 CDAT SSLBIS.
+L(L0) - Link latency between SW0 and RP0
+L(RP0) - Latency from root port to CPU via SRAT and HMAT (Generic Port).
+Total read and write latencies are the sum of all these parts.
+
+Bandwidth in this example is calculated as such:
+B(EP0) - Bandwidth from EP0 CDAT DSMAS+DSLBIS
+B(L1) - Link bandwidth between EP0 and SW0DSP0
+B(SW0) - Bandwidth for the switch from SW0 CDAT SSLBIS.
+B(L0) - Link bandwidth between SW0 and RP0
+B(RP0) - Bandwidth from root port to CPU via SRAT and HMAT (Generic Port).
+The total read and write bandwidth is the min() of all these parts.
+
+To calculate the link bandwidth:
+LinkOperatingFrequency (GT/s) is the current negotiated link speed.
+DataRatePerLink (MB/s) = LinkOperatingFrequency / 8
+Bandwidth (MB/s) = PCIeCurrentLinkWidth * DataRatePerLink
+Where PCIeCurrentLinkWidth is the number of lanes in the link.
+
+To calculate the link latency:
+LinkLatency (picoseconds) = FlitSize / LinkBandwidth (MB/s)
+
+See `CXL Memory Device SW Guide r1.0 <https://www.intel.com/content/www/us/en/content-details/643805/cxl-memory-device-software-guide.html>`_,
+section 2.11.3 and 2.11.4 for details.
+
+In the end, the access coordinates for a constructed memory region is calculated from one
+or more memory partitions from each of the CXL device(s).
+
+Shared Upstream Link Calculation
+================================
+For certain CXL region construction with endpoints behind CXL switches (SW) or
+Root Ports (RP), there is the possibility of the total bandwidth for all
+the endpoints behind a switch being more than the switch upstream link.
+A similar situation can occur within the host, upstream of the root ports.
+The CXL driver performs an additional pass after all the targets have
+arrived for a region in order to recalculate the bandwidths with possible
+upstream link being a limiting factor in mind.
+
+The algorithm assumes the configuration is a symmetric topology as that
+maximizes performance. When asymmetric topology is detected, the calculation
+is aborted. An asymmetric topology is detected during topology walk where the
+number of RPs detected as a grandparent is not equal to the number of devices
+iterated in the same iteration loop. The assumption is made that subtle
+asymmetry in properties does not happen and all paths to EPs are equal.
+
+There can be multiple switches under an RP. There can be multiple RPs under
+a CXL Host Bridge (HB). There can be multiple HBs under a CXL Fixed Memory
+Window Structure (CFMWS) in the :doc:`CEDT <../platform/acpi/cedt>`.
+
+An example hierarchy::
+
+                CFMWS 0
+                  |
+         _________|_________
+        |                   |
+    ACPI0017-0          ACPI0017-1
+ GP0/HB0/ACPI0016-0   GP1/HB1/ACPI0016-1
+    |          |        |           |
+   RP0        RP1      RP2         RP3
+    |          |        |           |
+  SW 0       SW 1     SW 2        SW 3
+  |   |      |   |    |   |       |   |
+ EP0 EP1    EP2 EP3  EP4  EP5    EP6 EP7
+
+Computation for the example hierarchy:
+
+Min (GP0 to CPU BW,
+     Min(SW 0 Upstream Link to RP0 BW,
+         Min(SW0SSLBIS for SW0DSP0 (EP0), EP0 DSLBIS, EP0 Upstream Link) +
+         Min(SW0SSLBIS for SW0DSP1 (EP1), EP1 DSLBIS, EP1 Upstream link)) +
+     Min(SW 1 Upstream Link to RP1 BW,
+         Min(SW1SSLBIS for SW1DSP0 (EP2), EP2 DSLBIS, EP2 Upstream Link) +
+         Min(SW1SSLBIS for SW1DSP1 (EP3), EP3 DSLBIS, EP3 Upstream link))) +
+Min (GP1 to CPU BW,
+     Min(SW 2 Upstream Link to RP2 BW,
+         Min(SW2SSLBIS for SW2DSP0 (EP4), EP4 DSLBIS, EP4 Upstream Link) +
+         Min(SW2SSLBIS for SW2DSP1 (EP5), EP5 DSLBIS, EP5 Upstream link)) +
+     Min(SW 3 Upstream Link to RP3 BW,
+         Min(SW3SSLBIS for SW3DSP0 (EP6), EP6 DSLBIS, EP6 Upstream Link) +
+         Min(SW3SSLBIS for SW3DSP1 (EP7), EP7 DSLBIS, EP7 Upstream link))))
+
+The calculation starts at cxl_region_shared_upstream_perf_update(). A xarray
+is created to collect all the endpoint bandwidths via the
+cxl_endpoint_gather_bandwidth() function. The min() of bandwidth from the
+endpoint CDAT and the upstream link bandwidth is calculated. If the endpoint
+has a CXL switch as a parent, then min() of calculated bandwidth and the
+bandwidth from the SSLBIS for the switch downstream port that is associated
+with the endpoint is calculated. The final bandwidth is stored in a
+'struct cxl_perf_ctx' in the xarray indexed by a device pointer. If the
+endpoint is direct attached to a root port (RP), the device pointer would be an
+RP device. If the endpoint is behind a switch, the device pointer would be the
+upstream device of the parent switch.
+
+At the next stage, the code walks through one or more switches if they exist
+in the topology. For endpoints directly attached to RPs, this step is skipped.
+If there is another switch upstream, the code takes the min() of the current
+gathered bandwidth and the upstream link bandwidth. If there's a switch
+upstream, then the SSLBIS of the upstream switch.
+
+Once the topology walk reaches the RP, whether it's direct attached endpoints
+or walking through the switch(es), cxl_rp_gather_bandwidth() is called. At
+this point all the bandwidths are aggregated per each host bridge, which is
+also the index for the resulting xarray.
+
+The next step is to take the min() of the per host bridge bandwidth and the
+bandwidth from the Generic Port (GP). The bandwidths for the GP are retrieved
+via ACPI tables (:doc:`SRAT <../platform/acpi/srat>` and
+:doc:`HMAT <../platform/acpi/hmat>`). The minimum bandwidth are aggregated
+under the same ACPI0017 device to form a new xarray.
+
+Finally, the cxl_region_update_bandwidth() is called and the aggregated
+bandwidth from all the members of the last xarray is updated for the
+access coordinates residing in the cxl region (cxlr) context.
+
+QTG ID
+======
+Each :doc:`CEDT <../platform/acpi/cedt>` has a QTG ID field. This field provides
+the ID that associates with a QoS Throttling Group (QTG) for the CFMWS window.
+Once the access coordinates are calculated, an ACPI Device Specific Method can
+be issued to the ACPI0016 device to retrieve the QTG ID depends on the access
+coordinates provided. The QTG ID for the device can be used as guidance to match
+to the CFMWS to setup the best Linux root decoder for the device performance.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/cxl-driver.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/cxl-driver.rst
new file mode 100644
index 000000000000..9759e90c3cf1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/cxl-driver.rst
@@ -0,0 +1,630 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+CXL Driver Operation
+====================
+
+The devices described in this section are present in ::
+
+  /sys/bus/cxl/devices/
+  /dev/cxl/
+
+The :code:`cxl-cli` library, maintained as part of the NDTCL project, may
+be used to script interactions with these devices.
+
+Drivers
+=======
+The CXL driver is split into a number of drivers.
+
+* cxl_core  - fundamental init interface and core object creation
+* cxl_port  - initializes root and provides port enumeration interface.
+* cxl_acpi  - initializes root decoders and interacts with ACPI data.
+* cxl_p/mem - initializes memory devices
+* cxl_pci   - uses cxl_port to enumates the actual fabric hierarchy.
+
+Driver Devices
+==============
+Here is an example from a single-socket system with 4 host bridges. Two host
+bridges have a single memory device attached, and the devices are interleaved
+into a single memory region. The memory region has been converted to dax. ::
+
+  # ls /sys/bus/cxl/devices/
+    dax_region0  decoder3.0  decoder6.0  mem0   port3
+    decoder0.0   decoder4.0  decoder6.1  mem1   port4
+    decoder1.0   decoder5.0  endpoint5   port1  region0
+    decoder2.0   decoder5.1  endpoint6   port2  root0
+
+
+.. kernel-render:: DOT
+   :alt: Digraph of CXL fabric describing host-bridge interleaving
+   :caption: Diagraph of CXL fabric with a host-bridge interleave memory region
+
+   digraph foo {
+     "root0" -> "port1";
+     "root0" -> "port3";
+     "root0" -> "decoder0.0";
+     "port1" -> "endpoint5";
+     "port3" -> "endpoint6";
+     "port1" -> "decoder1.0";
+     "port3" -> "decoder3.0";
+     "endpoint5" -> "decoder5.0";
+     "endpoint6" -> "decoder6.0";
+     "decoder0.0" -> "region0";
+     "decoder0.0" -> "decoder1.0";
+     "decoder0.0" -> "decoder3.0";
+     "decoder1.0" -> "decoder5.0";
+     "decoder3.0" -> "decoder6.0";
+     "decoder5.0" -> "region0";
+     "decoder6.0" -> "region0";
+     "region0" -> "dax_region0";
+     "dax_region0" -> "dax0.0";
+   }
+
+For this section we'll explore the devices present in this configuration, but
+we'll explore more configurations in-depth in example configurations below.
+
+Base Devices
+------------
+Most devices in a CXL fabric are a `port` of some kind (because each
+device mostly routes request from one device to the next, rather than
+provide a direct service).
+
+Root
+~~~~
+The `CXL Root` is logical object created by the `cxl_acpi` driver during
+:code:`cxl_acpi_probe` - if the :code:`ACPI0017` `Compute Express Link
+Root Object` Device Class is found.
+
+The Root contains links to:
+
+* `Host Bridge Ports` defined by CHBS in the :doc:`CEDT<../platform/acpi/cedt>`
+
+* `Downstream Ports` typically connected to `Host Bridge Ports`.
+
+* `Root Decoders` defined by CFMWS the :doc:`CEDT<../platform/acpi/cedt>`
+
+::
+
+  # ls /sys/bus/cxl/devices/root0
+    decoder0.0          dport0  dport5    port2  subsystem
+    decoders_committed  dport1  modalias  port3  uevent
+    devtype             dport4  port1     port4  uport
+
+  # cat /sys/bus/cxl/devices/root0/devtype
+    cxl_port
+
+  # cat port1/devtype
+    cxl_port
+
+  # cat decoder0.0/devtype
+    cxl_decoder_root
+
+The root is first `logical port` in the CXL fabric, as presented by the Linux
+CXL driver.  The `CXL root` is a special type of `switch port`, in that it
+only has downstream port connections.
+
+Port
+~~~~
+A `port` object is better described as a `switch port`.  It may represent a
+host bridge to the root or an actual switch port on a switch. A `switch port`
+contains one or more decoders used to route memory requests downstream ports,
+which may be connected to another `switch port` or an `endpoint port`.
+
+::
+
+  # ls /sys/bus/cxl/devices/port1
+    decoder1.0          dport0    driver     parent_dport  uport
+    decoders_committed  dport113  endpoint5  subsystem
+    devtype             dport2    modalias   uevent
+
+  # cat devtype
+    cxl_port
+
+  # cat decoder1.0/devtype
+    cxl_decoder_switch
+
+  # cat endpoint5/devtype
+    cxl_port
+
+CXL `Host Bridges` in the fabric are probed during :code:`cxl_acpi_probe` at
+the time the `CXL Root` is probed.  The allows for the immediate logical
+connection to between the root and host bridge.
+
+* The root has a downstream port connection to a host bridge
+
+* The host bridge has an upstream port connection to the root.
+
+* The host bridge has one or more downstream port connections to switch
+  or endpoint ports.
+
+A `Host Bridge` is a special type of CXL `switch port`. It is explicitly
+defined in the ACPI specification via `ACPI0016` ID.  `Host Bridge` ports
+will be probed at `acpi_probe` time, while similar ports on an actual switch
+will be probed later.  Otherwise, switch and host bridge ports look very
+similar - the both contain switch decoders which route accesses between
+upstream and downstream ports.
+
+Endpoint
+~~~~~~~~
+An `endpoint` is a terminal port in the fabric.  This is a `logical device`,
+and may be one of many `logical devices` presented by a memory device. It
+is still considered a type of `port` in the fabric.
+
+An `endpoint` contains `endpoint decoders` and the device's Coherent Device
+Attribute Table (which describes the device's capabilities). ::
+
+  # ls /sys/bus/cxl/devices/endpoint5
+    CDAT        decoders_committed  modalias      uevent
+    decoder5.0  devtype             parent_dport  uport
+    decoder5.1  driver              subsystem
+
+  # cat /sys/bus/cxl/devices/endpoint5/devtype
+    cxl_port
+
+  # cat /sys/bus/cxl/devices/endpoint5/decoder5.0/devtype
+    cxl_decoder_endpoint
+
+
+Memory Device (memdev)
+~~~~~~~~~~~~~~~~~~~~~~
+A `memdev` is probed and added by the `cxl_pci` driver in :code:`cxl_pci_probe`
+and is managed by the `cxl_mem` driver. It primarily provides the `IOCTL`
+interface to a memory device, via :code:`/dev/cxl/memN`, and exposes various
+device configuration data. ::
+
+  # ls /sys/bus/cxl/devices/mem0
+    dev       firmware_version    payload_max  security   uevent
+    driver    label_storage_size  pmem         serial
+    firmware  numa_node           ram          subsystem
+
+A Memory Device is a discrete base object that is not a port.  While the
+physical device it belongs to may also host an `endpoint`, the relationship
+between an `endpoint` and a `memdev` is not captured in sysfs.
+
+Port Relationships
+~~~~~~~~~~~~~~~~~~
+In our example described above, there are four host bridges attached to the
+root, and two of the host bridges have one endpoint attached.
+
+.. kernel-render:: DOT
+   :alt: Digraph of CXL fabric describing host-bridge interleaving
+   :caption: Diagraph of CXL fabric with a host-bridge interleave memory region
+
+   digraph foo {
+     "root0"    -> "port1";
+     "root0"    -> "port2";
+     "root0"    -> "port3";
+     "root0"    -> "port4";
+     "port1" -> "endpoint5";
+     "port3" -> "endpoint6";
+   }
+
+Decoders
+--------
+A `Decoder` is short for a CXL Host-Managed Device Memory (HDM) Decoder. It is
+a device that routes accesses through the CXL fabric to an endpoint, and at
+the endpoint translates a `Host Physical` to `Device Physical` Addressing.
+
+The CXL 3.1 specification heavily implies that only endpoint decoders should
+engage in translation of `Host Physical Address` to `Device Physical Address`.
+::
+
+  8.2.4.20 CXL HDM Decoder Capability Structure
+
+  IMPLEMENTATION NOTE
+  CXL Host Bridge and Upstream Switch Port Decode Flow
+
+  IMPLEMENTATION NOTE
+  Device Decode Logic
+
+These notes imply that there are two logical groups of decoders.
+
+* Routing Decoder - a decoder which routes accesses but does not translate
+  addresses from HPA to DPA.
+
+* Translating Decoder - a decoder which translates accesses from HPA to DPA
+  for an endpoint to service.
+
+The CXL drivers distinguish 3 decoder types: root, switch, and endpoint. Only
+endpoint decoders are Translating Decoders, all others are Routing Decoders.
+
+.. note:: PLATFORM VENDORS BE AWARE
+
+   Linux makes a strong assumption that endpoint decoders are the only decoder
+   in the fabric that actively translates HPA to DPA.  Linux assumes routing
+   decoders pass the HPA unchanged to the next decoder in the fabric.
+
+   It is therefore assumed that any given decoder in the fabric will have an
+   address range that is a subset of its upstream port decoder. Any deviation
+   from this scheme undefined per the specification.  Linux prioritizes
+   spec-defined / architectural behavior.
+
+Decoders may have one or more `Downstream Targets` if configured to interleave
+memory accesses.  This will be presented in sysfs via the :code:`target_list`
+parameter.
+
+Root Decoder
+~~~~~~~~~~~~
+A `Root Decoder` is logical construct of the physical address and interleave
+configurations present in the CFMWS field of the :doc:`CEDT
+<../platform/acpi/cedt>`.
+Linux presents this information as a decoder present in the `CXL Root`.  We
+consider this a `Root Decoder`, though technically it exists on the boundary
+of the CXL specification and platform-specific CXL root implementations.
+
+Linux considers these logical decoders a type of `Routing Decoder`, and is the
+first decoder in the CXL fabric to receive a memory access from the platform's
+memory controllers.
+
+`Root Decoders` are created during :code:`cxl_acpi_probe`.  One root decoder
+is created per CFMWS entry in the :doc:`CEDT <../platform/acpi/cedt>`.
+
+The :code:`target_list` parameter is filled by the CFMWS target fields. Targets
+of a root decoder are `Host Bridges`, which means interleave done at the root
+decoder level is an `Inter-Host-Bridge Interleave`.
+
+Only root decoders are capable of `Inter-Host-Bridge Interleave`.
+
+Such interleaves must be configured by the platform and described in the ACPI
+CEDT CFMWS, as the target CXL host bridge UIDs in the CFMWS must match the CXL
+host bridge UIDs in the CHBS field of the :doc:`CEDT
+<../platform/acpi/cedt>` and the UID field of CXL Host Bridges defined in
+the :doc:`DSDT <../platform/acpi/dsdt>`.
+
+Interleave settings in a root decoder describe how to interleave accesses among
+the *immediate downstream targets*, not the entire interleave set.
+
+The memory range described in the root decoder is used to
+
+1) Create a memory region (:code:`region0` in this example), and
+
+2) Associate the region with an IO Memory Resource (:code:`kernel/resource.c`)
+
+::
+
+  # ls /sys/bus/cxl/devices/decoder0.0/
+    cap_pmem           devtype                 region0
+    cap_ram            interleave_granularity  size
+    cap_type2          interleave_ways         start
+    cap_type3          locked                  subsystem
+    create_ram_region  modalias                target_list
+    delete_region      qos_class               uevent
+
+  # cat /sys/bus/cxl/devices/decoder0.0/region0/resource
+    0xc050000000
+
+The IO Memory Resource is created during early boot when the CFMWS region is
+identified in the EFI Memory Map or E820 table (on x86).
+
+Root decoders are defined as a separate devtype, but are also a type
+of `Switch Decoder` due to having downstream targets. ::
+
+  # cat /sys/bus/cxl/devices/decoder0.0/devtype
+    cxl_decoder_root
+
+Switch Decoder
+~~~~~~~~~~~~~~
+Any non-root, translating decoder is considered a `Switch Decoder`, and will
+present with the type :code:`cxl_decoder_switch`. Both `Host Bridge` and `CXL
+Switch` (device) decoders are of type :code:`cxl_decoder_switch`. ::
+
+  # ls /sys/bus/cxl/devices/decoder1.0/
+    devtype                 locked    size       target_list
+    interleave_granularity  modalias  start      target_type
+    interleave_ways         region    subsystem  uevent
+
+  # cat /sys/bus/cxl/devices/decoder1.0/devtype
+    cxl_decoder_switch
+
+  # cat /sys/bus/cxl/devices/decoder1.0/region
+    region0
+
+A `Switch Decoder` has associations between a region defined by a root
+decoder and downstream target ports.  Interleaving done within a switch decoder
+is a multi-downstream-port interleave (or `Intra-Host-Bridge Interleave` for
+host bridges).
+
+Interleave settings in a switch decoder describe how to interleave accesses
+among the *immediate downstream targets*, not the entire interleave set.
+
+Switch decoders are created during :code:`cxl_switch_port_probe` in the
+:code:`cxl_port` driver, and is created based on a PCI device's DVSEC
+registers.
+
+Switch decoder programming is validated during probe if the platform programs
+them during boot (See `Auto Decoders` below), or on commit if programmed at
+runtime (See `Runtime Programming` below).
+
+
+Endpoint Decoder
+~~~~~~~~~~~~~~~~
+Any decoder attached to a *terminal* point in the CXL fabric (`An Endpoint`) is
+considered an `Endpoint Decoder`. Endpoint decoders are of type
+:code:`cxl_decoder_endpoint`. ::
+
+  # ls /sys/bus/cxl/devices/decoder5.0
+    devtype                 locked    start
+    dpa_resource            modalias  subsystem
+    dpa_size                mode      target_type
+    interleave_granularity  region    uevent
+    interleave_ways         size
+
+  # cat /sys/bus/cxl/devices/decoder5.0/devtype
+    cxl_decoder_endpoint
+
+  # cat /sys/bus/cxl/devices/decoder5.0/region
+    region0
+
+An `Endpoint Decoder` has an association with a region defined by a root
+decoder and describes the device-local resource associated with this region.
+
+Unlike root and switch decoders, endpoint decoders translate `Host Physical` to
+`Device Physical` address ranges.  The interleave settings on an endpoint
+therefore describe the entire *interleave set*.
+
+`Device Physical Address` regions must be committed in-order. For example, the
+DPA region starting at 0x80000000 cannot be committed before the DPA region
+starting at 0x0.
+
+As of Linux v6.15, Linux does not support *imbalanced* interleave setups, all
+endpoints in an interleave set are expected to have the same interleave
+settings (granularity and ways must be the same).
+
+Endpoint decoders are created during :code:`cxl_endpoint_port_probe` in the
+:code:`cxl_port` driver, and is created based on a PCI device's DVSEC registers.
+
+Decoder Relationships
+~~~~~~~~~~~~~~~~~~~~~
+In our example described above, there is one root decoder which routes memory
+accesses over two host bridges.  Each host bridge has a decoder which routes
+access to their singular endpoint targets.  Each endpoint has a decoder which
+translates HPA to DPA and services the memory request.
+
+The driver validates relationships between ports by decoder programming, so
+we can think of decoders being related in a similarly hierarchical fashion to
+ports.
+
+.. kernel-render:: DOT
+   :alt: Digraph of hierarchical relationship between root, switch, and endpoint decoders.
+   :caption: Diagraph of CXL root, switch, and endpoint decoders.
+
+   digraph foo {
+     "root0"    -> "decoder0.0";
+     "decoder0.0" -> "decoder1.0";
+     "decoder0.0" -> "decoder3.0";
+     "decoder1.0" -> "decoder5.0";
+     "decoder3.0" -> "decoder6.0";
+   }
+
+Regions
+-------
+
+Memory Region
+~~~~~~~~~~~~~
+A `Memory Region` is a logical construct that connects a set of CXL ports in
+the fabric to an IO Memory Resource.  It is ultimately used to expose the memory
+on these devices to the DAX subsystem via a `DAX Region`.
+
+An example RAM region: ::
+
+  # ls /sys/bus/cxl/devices/region0/
+    access0      devtype                 modalias  subsystem  uuid
+    access1      driver                  mode      target0
+    commit       interleave_granularity  resource  target1
+    dax_region0  interleave_ways         size      uevent
+
+A memory region can be constructed during endpoint probe, if decoders were
+programmed by BIOS/EFI (see `Auto Decoders`), or by creating a region manually
+via a `Root Decoder`'s :code:`create_ram_region` or :code:`create_pmem_region`
+interfaces.
+
+The interleave settings in a `Memory Region` describe the configuration of the
+`Interleave Set` - and are what can be expected to be seen in the endpoint
+interleave settings.
+
+.. kernel-render:: DOT
+   :alt: Digraph of CXL memory region relationships between root and endpoint decoders.
+   :caption: Regions are created based on root decoder configurations. Endpoint decoders
+             must be programmed with the same interleave settings as the region.
+
+   digraph foo {
+     "root0"    -> "decoder0.0";
+     "decoder0.0" -> "region0";
+     "region0" -> "decoder5.0";
+     "region0" -> "decoder6.0";
+   }
+
+DAX Region
+~~~~~~~~~~
+A `DAX Region` is used to convert a CXL `Memory Region` to a DAX device. A
+DAX device may then be accessed directly via a file descriptor interface, or
+converted to System RAM via the DAX kmem driver.  See the DAX driver section
+for more details. ::
+
+  # ls /sys/bus/cxl/devices/dax_region0/
+    dax0.0      devtype  modalias   uevent
+    dax_region  driver   subsystem
+
+Mailbox Interfaces
+------------------
+A mailbox command interface for each device is exposed in ::
+
+  /dev/cxl/mem0
+  /dev/cxl/mem1
+
+These mailboxes may receive any specification-defined command. Raw commands
+(custom commands) can only be sent to these interfaces if the build config
+:code:`CXL_MEM_RAW_COMMANDS` is set.  This is considered a debug and/or
+development interface, not an officially supported mechanism for creation
+of vendor-specific commands (see the `fwctl` subsystem for that).
+
+Decoder Programming
+===================
+
+Runtime Programming
+-------------------
+During probe, the only decoders *required* to be programmed are `Root Decoders`.
+In reality, `Root Decoders` are a logical construct to describe the memory
+region and interleave configuration at the host bridge level - as described
+in the ACPI CEDT CFMWS.
+
+All other `Switch` and `Endpoint` decoders may be programmed by the user
+at runtime - if the platform supports such configurations.
+
+This interaction is what creates a `Software Defined Memory` environment.
+
+See the :code:`cxl-cli` documentation for more information about how to
+configure CXL decoders at runtime.
+
+Auto Decoders
+-------------
+Auto Decoders are decoders programmed by BIOS/EFI at boot time, and are
+almost always locked (cannot be changed).  This is done by a platform
+which may have a static configuration - or certain quirks which may prevent
+dynamic runtime changes to the decoders (such as requiring additional
+controller programming within the CPU complex outside the scope of CXL).
+
+Auto Decoders are probed automatically as long as the devices and memory
+regions they are associated with probe without issue.  When probing Auto
+Decoders, the driver's primary responsibility is to ensure the fabric is
+sane - as-if validating runtime programmed regions and decoders.
+
+If Linux cannot validate auto-decoder configuration, the memory will not
+be surfaced as a DAX device - and therefore not be exposed to the page
+allocator - effectively stranding it.
+
+Interleave
+----------
+
+The Linux CXL driver supports `Cross-Link First` interleave. This dictates
+how interleave is programmed at each decoder step, as the driver validates
+the relationships between a decoder and it's parent.
+
+For example, in a `Cross-Link First` interleave setup with 16 endpoints
+attached to 4 host bridges, linux expects the following ways/granularity
+across the root, host bridge, and endpoints respectively.
+
+.. flat-table:: 4x4 cross-link first interleave settings
+
+  * - decoder
+    - ways
+    - granularity
+
+  * - root
+    - 4
+    - 256
+
+  * - host bridge
+    - 4
+    - 1024
+
+  * - endpoint
+    - 16
+    - 256
+
+At the root, every a given access will be routed to the
+:code:`((HPA / 256) % 4)th` target host bridge. Within a host bridge, every
+:code:`((HPA / 1024) % 4)th` target endpoint.  Each endpoint translates based
+on the entire 16 device interleave set.
+
+Unbalanced interleave sets are not supported - decoders at a similar point
+in the hierarchy (e.g. all host bridge decoders) must have the same ways and
+granularity configuration.
+
+At Root
+~~~~~~~
+Root decoder interleave is defined by CFMWS field of the :doc:`CEDT
+<../platform/acpi/cedt>`.  The CEDT may actually define multiple CFMWS
+configurations to describe the same physical capacity, with the intent to allow
+users to decide at runtime whether to online memory as interleaved or
+non-interleaved. ::
+
+             Subtable Type : 01 [CXL Fixed Memory Window Structure]
+       Window base address : 0000000100000000
+               Window size : 0000000100000000
+  Interleave Members (2^n) : 00
+     Interleave Arithmetic : 00
+              First Target : 00000007
+
+             Subtable Type : 01 [CXL Fixed Memory Window Structure]
+       Window base address : 0000000200000000
+               Window size : 0000000100000000
+  Interleave Members (2^n) : 00
+     Interleave Arithmetic : 00
+              First Target : 00000006
+
+             Subtable Type : 01 [CXL Fixed Memory Window Structure]
+       Window base address : 0000000300000000
+               Window size : 0000000200000000
+  Interleave Members (2^n) : 01
+     Interleave Arithmetic : 00
+              First Target : 00000007
+               Next Target : 00000006
+
+In this example, the CFMWS defines two discrete non-interleaved 4GB regions
+for each host bridge, and one interleaved 8GB region that targets both. This
+would result in 3 root decoders presenting in the root. ::
+
+  # ls /sys/bus/cxl/devices/root0/decoder*
+    decoder0.0  decoder0.1  decoder0.2
+
+  # cat /sys/bus/cxl/devices/decoder0.0/target_list start size
+    7
+    0x100000000
+    0x100000000
+
+  # cat /sys/bus/cxl/devices/decoder0.1/target_list start size
+    6
+    0x200000000
+    0x100000000
+
+  # cat /sys/bus/cxl/devices/decoder0.2/target_list start size
+    7,6
+    0x300000000
+    0x200000000
+
+These decoders are not runtime programmable.  They are used to generate a
+`Memory Region` to bring this memory online with runtime programmed settings
+at the `Switch` and `Endpoint` decoders.
+
+At Host Bridge or Switch
+~~~~~~~~~~~~~~~~~~~~~~~~
+`Host Bridge` and `Switch` decoders are programmable via the following fields:
+
+- :code:`start` - the HPA region associated with the memory region
+- :code:`size` - the size of the region
+- :code:`target_list` - the list of downstream ports
+- :code:`interleave_ways` - the number downstream ports to interleave across
+- :code:`interleave_granularity` - the granularity to interleave at.
+
+Linux expects the :code:`interleave_granularity` of switch decoders to be
+derived from their upstream port connections. In `Cross-Link First` interleave
+configurations, the :code:`interleave_granularity` of a decoder is equal to
+:code:`parent_interleave_granularity * parent_interleave_ways`.
+
+At Endpoint
+~~~~~~~~~~~
+`Endpoint Decoders` are programmed similar to Host Bridge and Switch decoders,
+with the exception that the ways and granularity are defined by the interleave
+set (e.g. the interleave settings defined by the associated `Memory Region`).
+
+- :code:`start` - the HPA region associated with the memory region
+- :code:`size` - the size of the region
+- :code:`interleave_ways` - the number endpoints in the interleave set
+- :code:`interleave_granularity` - the granularity to interleave at.
+
+These settings are used by endpoint decoders to *Translate* memory requests
+from HPA to DPA.  This is why they must be aware of the entire interleave set.
+
+Linux does not support unbalanced interleave configurations.  As a result, all
+endpoints in an interleave set must have the same ways and granularity.
+
+Example Configurations
+======================
+.. toctree::
+   :maxdepth: 1
+
+   example-configurations/single-device.rst
+   example-configurations/hb-interleave.rst
+   example-configurations/intra-hb-interleave.rst
+   example-configurations/multi-interleave.rst
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/dax-driver.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/dax-driver.rst
new file mode 100644
index 000000000000..10d953a2167b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/dax-driver.rst
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+DAX Driver Operation
+====================
+The `Direct Access Device` driver was originally designed to provide a
+memory-like access mechanism to memory-like block-devices.  It was
+extended to support CXL Memory Devices, which provide user-configured
+memory devices.
+
+The CXL subsystem depends on the DAX subsystem to either:
+
+- Generate a file-like interface to userland via :code:`/dev/daxN.Y`, or
+- Engage the memory-hotplug interface to add CXL memory to page allocator.
+
+The DAX subsystem exposes this ability through the `cxl_dax_region` driver.
+A `dax_region` provides the translation between a CXL `memory_region` and
+a `DAX Device`.
+
+DAX Device
+==========
+A `DAX Device` is a file-like interface exposed in :code:`/dev/daxN.Y`. A
+memory region exposed via dax device can be accessed via userland software
+via the :code:`mmap()` system-call.  The result is direct mappings to the
+CXL capacity in the task's page tables.
+
+Users wishing to manually handle allocation of CXL memory should use this
+interface.
+
+kmem conversion
+===============
+The :code:`dax_kmem` driver converts a `DAX Device` into a series of `hotplug
+memory blocks` managed by :code:`kernel/memory-hotplug.c`.  This capacity
+will be exposed to the kernel page allocator in the user-selected memory
+zone.
+
+The :code:`memmap_on_memory` setting (both global and DAX device local)
+dictates where the kernell will allocate the :code:`struct folio` descriptors
+for this memory will come from.  If :code:`memmap_on_memory` is set, memory
+hotplug will set aside a portion of the memory block capacity to allocate
+folios. If unset, the memory is allocated via a normal :code:`GFP_KERNEL`
+allocation - and as a result will most likely land on the local NUM node of the
+CPU executing the hotplug operation.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/early-boot.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/early-boot.rst
new file mode 100644
index 000000000000..a7fc6fc85fbe
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/early-boot.rst
@@ -0,0 +1,137 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Linux Init (Early Boot)
+=======================
+
+Linux configuration is split into two major steps: Early-Boot and everything else.
+
+During early boot, Linux sets up immutable resources (such as numa nodes), while
+later operations include things like driver probe and memory hotplug.  Linux may
+read EFI and ACPI information throughout this process to configure logical
+representations of the devices.
+
+During Linux Early Boot stage (functions in the kernel that have the __init
+decorator), the system takes the resources created by EFI/BIOS
+(:doc:`ACPI tables <../platform/acpi>`) and turns them into resources that the
+kernel can consume.
+
+
+BIOS, Build and Boot Options
+============================
+
+There are 4 pre-boot options that need to be considered during kernel build
+which dictate how memory will be managed by Linux during early boot.
+
+* EFI_MEMORY_SP
+
+  * BIOS/EFI Option that dictates whether memory is SystemRAM or
+    Specific Purpose.  Specific Purpose memory will be deferred to
+    drivers to manage - and not immediately exposed as system RAM.
+
+* CONFIG_EFI_SOFT_RESERVE
+
+  * Linux Build config option that dictates whether the kernel supports
+    Specific Purpose memory.
+
+* CONFIG_MHP_DEFAULT_ONLINE_TYPE
+
+  * Linux Build config that dictates whether and how Specific Purpose memory
+    converted to a dax device should be managed (left as DAX or onlined as
+    SystemRAM in ZONE_NORMAL or ZONE_MOVABLE).
+
+* nosoftreserve
+
+  * Linux kernel boot option that dictates whether Soft Reserve should be
+    supported.  Similar to CONFIG_EFI_SOFT_RESERVE.
+
+Memory Map Creation
+===================
+
+While the kernel parses the EFI memory map, if :code:`Specific Purpose` memory
+is supported and detected, it will set this region aside as
+:code:`SOFT_RESERVED`.
+
+If :code:`EFI_MEMORY_SP=0`, :code:`CONFIG_EFI_SOFT_RESERVE=n`, or
+:code:`nosoftreserve=y` - Linux will default a CXL device memory region to
+SystemRAM.  This will expose the memory to the kernel page allocator in
+:code:`ZONE_NORMAL`, making it available for use for most allocations (including
+:code:`struct page` and page tables).
+
+If `Specific Purpose` is set and supported, :code:`CONFIG_MHP_DEFAULT_ONLINE_TYPE_*`
+dictates whether the memory is onlined by default (:code:`_OFFLINE` or
+:code:`_ONLINE_*`), and if online which zone to online this memory to by default
+(:code:`_NORMAL` or :code:`_MOVABLE`).
+
+If placed in :code:`ZONE_MOVABLE`, the memory will not be available for most
+kernel allocations (such as :code:`struct page` or page tables).  This may
+significant impact performance depending on the memory capacity of the system.
+
+
+NUMA Node Reservation
+=====================
+
+Linux refers to the proximity domains (:code:`PXM`) defined in the :doc:`SRAT
+<../platform/acpi/srat>` to create NUMA nodes in :code:`acpi_numa_init`.
+Typically, there is a 1:1 relation between :code:`PXM` and NUMA node IDs.
+
+The SRAT is the only ACPI defined way of defining Proximity Domains. Linux
+chooses to, at most, map those 1:1 with NUMA nodes.
+:doc:`CEDT <../platform/acpi/cedt>` adds a description of SPA ranges which
+Linux may map to one or more NUMA nodes.
+
+If there are CXL ranges in the CFMWS but not in SRAT, then a fake :code:`PXM`
+is created (as of v6.15). In the future, Linux may reject CFMWS not described
+by SRAT due to the ambiguity of proximity domain association.
+
+It is important to note that NUMA node creation cannot be done at runtime. All
+possible NUMA nodes are identified at :code:`__init` time, more specifically
+during :code:`mm_init`. The CEDT and SRAT must contain sufficient :code:`PXM`
+data for Linux to identify NUMA nodes their associated memory regions.
+
+The relevant code exists in: :code:`linux/drivers/acpi/numa/srat.c`.
+
+See :doc:`Example Platform Configurations <../platform/example-configs>`
+for more info.
+
+Memory Tiers Creation
+=====================
+Memory tiers are a collection of NUMA nodes grouped by performance characteristics.
+During :code:`__init`, Linux initializes the system with a default memory tier that
+contains all nodes marked :code:`N_MEMORY`.
+
+:code:`memory_tier_init` is called at boot for all nodes with memory online by
+default. :code:`memory_tier_late_init` is called during late-init for nodes setup
+during driver configuration.
+
+Nodes are only marked :code:`N_MEMORY` if they have *online* memory.
+
+Tier membership can be inspected in ::
+
+  /sys/devices/virtual/memory_tiering/memory_tierN/nodelist
+  0-1
+
+If nodes are grouped which have clear difference in performance, check the
+:doc:`HMAT <../platform/acpi/hmat>` and CDAT information for the CXL nodes. All
+nodes default to the DRAM tier, unless HMAT/CDAT information is reported to the
+memory_tier component via `access_coordinates`.
+
+For more, see :doc:`CXL access coordinates documentation
+<../linux/access-coordinates>`.
+
+Contiguous Memory Allocation
+============================
+The contiguous memory allocator (CMA) enables reservation of contiguous memory
+regions on NUMA nodes during early boot.  However, CMA cannot reserve memory
+on NUMA nodes that are not online during early boot. ::
+
+  void __init hugetlb_cma_reserve(int order) {
+    if (!node_online(nid))
+      /* do not allow reservations */
+  }
+
+This means if users intend to defer management of CXL memory to the driver, CMA
+cannot be used to guarantee huge page allocations.  If enabling CXL memory as
+SystemRAM in `ZONE_NORMAL` during early boot, CMA reservations per-node can be
+made with the :code:`cma_pernuma` or :code:`numa_cma` kernel command line
+parameters.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/example-configurations/hb-interleave.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/hb-interleave.rst
new file mode 100644
index 000000000000..f071490763a2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/hb-interleave.rst
@@ -0,0 +1,314 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Inter-Host-Bridge Interleave
+============================
+This cxl-cli configuration dump shows the following host configuration:
+
+* A single socket system with one CXL root
+* CXL Root has Four (4) CXL Host Bridges
+* Two CXL Host Bridges have a single CXL Memory Expander Attached
+* The CXL root is configured to interleave across the two host bridges.
+
+This output is generated by :code:`cxl list -v` and describes the relationships
+between objects exposed in :code:`/sys/bus/cxl/devices/`.
+
+::
+
+  [
+    {
+        "bus":"root0",
+        "provider":"ACPI.CXL",
+        "nr_dports":4,
+        "dports":[
+            {
+                "dport":"pci0000:00",
+                "alias":"ACPI0016:01",
+                "id":0
+            },
+            {
+                "dport":"pci0000:a8",
+                "alias":"ACPI0016:02",
+                "id":4
+            },
+            {
+                "dport":"pci0000:2a",
+                "alias":"ACPI0016:03",
+                "id":1
+            },
+            {
+                "dport":"pci0000:d2",
+                "alias":"ACPI0016:00",
+                "id":5
+            }
+        ],
+
+This chunk shows the CXL "bus" (root0) has 4 downstream ports attached to CXL
+Host Bridges.  The `Root` can be considered the singular upstream port attached
+to the platform's memory controller - which routes memory requests to it.
+
+The `ports:root0` section lays out how each of these downstream ports are
+configured.  If a port is not configured (id's 0 and 1), they are omitted.
+
+::
+
+        "ports:root0":[
+            {
+                "port":"port1",
+                "host":"pci0000:d2",
+                "depth":1,
+                "nr_dports":3,
+                "dports":[
+                    {
+                        "dport":"0000:d2:01.1",
+                        "alias":"device:02",
+                        "id":0
+                    },
+                    {
+                        "dport":"0000:d2:01.3",
+                        "alias":"device:05",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:d2:07.1",
+                        "alias":"device:0d",
+                        "id":113
+                    }
+                ],
+
+This chunk shows the available downstream ports associated with the CXL Host
+Bridge :code:`port1`.  In this case, :code:`port1` has 3 available downstream
+ports: :code:`dport1`, :code:`dport2`, and :code:`dport113`..
+
+::
+
+                "endpoints:port1":[
+                    {
+                        "endpoint":"endpoint5",
+                        "host":"mem0",
+                        "parent_dport":"0000:d2:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem0",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:d3:00.0"
+                        },
+                        "decoders:endpoint5":[
+                            {
+                                "decoder":"decoder5.0",
+                                "resource":825975898112,
+                                "size":274877906944,
+                                "interleave_ways":2,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+
+This chunk shows the endpoints attached to the host bridge :code:`port1`.
+
+:code:`endpoint5` contains a single configured decoder :code:`decoder5.0`
+which has the same interleave configuration as :code:`region0` (shown later).
+
+Next we have the decodesr belonging to the host bridge:
+
+::
+
+                "decoders:port1":[
+                    {
+                        "decoder":"decoder1.0",
+                        "resource":825975898112,
+                        "size":274877906944,
+                        "interleave_ways":1,
+                        "region":"region0",
+                        "nr_targets":1,
+                        "targets":[
+                            {
+                                "target":"0000:d2:01.1",
+                                "alias":"device:02",
+                                "position":0,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+Host Bridge :code:`port1` has a single decoder (:code:`decoder1.0`), whose only
+target is :code:`dport1` - which is attached to :code:`endpoint5`.
+
+The following chunk shows a similar configuration for Host Bridge :code:`port3`,
+the second host bridge with a memory device attached.
+
+::
+
+            {
+                "port":"port3",
+                "host":"pci0000:a8",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:a8:01.1",
+                        "alias":"device:c3",
+                        "id":0
+                    }
+                ],
+                "endpoints:port3":[
+                    {
+                        "endpoint":"endpoint6",
+                        "host":"mem1",
+                        "parent_dport":"0000:a8:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem1",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:a9:00.0"
+                        },
+                        "decoders:endpoint6":[
+                            {
+                                "decoder":"decoder6.0",
+                                "resource":825975898112,
+                                "size":274877906944,
+                                "interleave_ways":2,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+                "decoders:port3":[
+                    {
+                        "decoder":"decoder3.0",
+                        "resource":825975898112,
+                        "size":274877906944,
+                        "interleave_ways":1,
+                        "region":"region0",
+                        "nr_targets":1,
+                        "targets":[
+                            {
+                                "target":"0000:a8:01.1",
+                                "alias":"device:c3",
+                                "position":0,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+
+The next chunk shows the two CXL host bridges without attached endpoints.
+
+::
+
+            {
+                "port":"port2",
+                "host":"pci0000:00",
+                "depth":1,
+                "nr_dports":2,
+                "dports":[
+                    {
+                        "dport":"0000:00:01.3",
+                        "alias":"device:55",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:00:07.1",
+                        "alias":"device:5d",
+                        "id":113
+                    }
+                ]
+            },
+            {
+                "port":"port4",
+                "host":"pci0000:2a",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:2a:01.1",
+                        "alias":"device:d0",
+                        "id":0
+                    }
+                ]
+            }
+        ],
+
+Next we have the `Root Decoders` belonging to :code:`root0`.  This root decoder
+applies the interleave across the downstream ports :code:`port1` and
+:code:`port3` - with a granularity of 256 bytes.
+
+This information is generated by the CXL driver reading the ACPI CEDT CMFWS.
+
+::
+
+        "decoders:root0":[
+            {
+                "decoder":"decoder0.0",
+                "resource":825975898112,
+                "size":274877906944,
+                "interleave_ways":2,
+                "interleave_granularity":256,
+                "max_available_extent":0,
+                "volatile_capable":true,
+                "nr_targets":2,
+                "targets":[
+                    {
+                        "target":"pci0000:a8",
+                        "alias":"ACPI0016:02",
+                        "position":1,
+                        "id":4
+                    },
+                    {
+                        "target":"pci0000:d2",
+                        "alias":"ACPI0016:00",
+                        "position":0,
+                        "id":5
+                    }
+                ],
+
+Finally we have the `Memory Region` associated with the `Root Decoder`
+:code:`decoder0.0`.  This region describes the overall interleave configuration
+of the interleave set.
+
+::
+
+                "regions:decoder0.0":[
+                    {
+                        "region":"region0",
+                        "resource":825975898112,
+                        "size":274877906944,
+                        "type":"ram",
+                        "interleave_ways":2,
+                        "interleave_granularity":256,
+                        "decode_state":"commit",
+                        "mappings":[
+                            {
+                                "position":1,
+                                "memdev":"mem1",
+                                "decoder":"decoder6.0"
+                            },
+                            {
+                                "position":0,
+                                "memdev":"mem0",
+                                "decoder":"decoder5.0"
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    }
+  ]
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/example-configurations/intra-hb-interleave.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/intra-hb-interleave.rst
new file mode 100644
index 000000000000..077dfaf8458d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/intra-hb-interleave.rst
@@ -0,0 +1,291 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Intra-Host-Bridge Interleave
+============================
+This cxl-cli configuration dump shows the following host configuration:
+
+* A single socket system with one CXL root
+* CXL Root has Four (4) CXL Host Bridges
+* One (1) CXL Host Bridges has two CXL Memory Expanders Attached
+* The Host bridge decoder is programmed to interleave across the expanders.
+
+This output is generated by :code:`cxl list -v` and describes the relationships
+between objects exposed in :code:`/sys/bus/cxl/devices/`.
+
+::
+
+  [
+    {
+        "bus":"root0",
+        "provider":"ACPI.CXL",
+        "nr_dports":4,
+        "dports":[
+            {
+                "dport":"pci0000:00",
+                "alias":"ACPI0016:01",
+                "id":0
+            },
+            {
+                "dport":"pci0000:a8",
+                "alias":"ACPI0016:02",
+                "id":4
+            },
+            {
+                "dport":"pci0000:2a",
+                "alias":"ACPI0016:03",
+                "id":1
+            },
+            {
+                "dport":"pci0000:d2",
+                "alias":"ACPI0016:00",
+                "id":5
+            }
+        ],
+
+This chunk shows the CXL "bus" (root0) has 4 downstream ports attached to CXL
+Host Bridges.  The `Root` can be considered the singular upstream port attached
+to the platform's memory controller - which routes memory requests to it.
+
+The `ports:root0` section lays out how each of these downstream ports are
+configured.  If a port is not configured (id's 0 and 1), they are omitted.
+
+::
+
+        "ports:root0":[
+            {
+                "port":"port1",
+                "host":"pci0000:d2",
+                "depth":1,
+                "nr_dports":3,
+                "dports":[
+                    {
+                        "dport":"0000:d2:01.1",
+                        "alias":"device:02",
+                        "id":0
+                    },
+                    {
+                        "dport":"0000:d2:01.3",
+                        "alias":"device:05",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:d2:07.1",
+                        "alias":"device:0d",
+                        "id":113
+                    }
+                ],
+
+This chunk shows the available downstream ports associated with the CXL Host
+Bridge :code:`port1`.  In this case, :code:`port1` has 3 available downstream
+ports: :code:`dport1`, :code:`dport2`, and :code:`dport113`..
+
+::
+
+                "endpoints:port1":[
+                    {
+                        "endpoint":"endpoint5",
+                        "host":"mem0",
+                        "parent_dport":"0000:d2:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem0",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:d3:00.0"
+                        },
+                        "decoders:endpoint5":[
+                            {
+                                "decoder":"decoder5.0",
+                                "resource":825975898112,
+                                "size":274877906944,
+                                "interleave_ways":2,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    },
+                    {
+                        "endpoint":"endpoint6",
+                        "host":"mem1",
+                        "parent_dport":"0000:d2:01.3,
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem1",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:a9:00.0"
+                        },
+                        "decoders:endpoint6":[
+                            {
+                                "decoder":"decoder6.0",
+                                "resource":825975898112,
+                                "size":274877906944,
+                                "interleave_ways":2,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+
+This chunk shows the endpoints attached to the host bridge :code:`port1`.
+
+:code:`endpoint5` contains a single configured decoder :code:`decoder5.0`
+which has the same interleave configuration memory region they belong to
+(show later).
+
+Next we have the decoders belonging to the host bridge:
+
+::
+
+                "decoders:port1":[
+                    {
+                        "decoder":"decoder1.0",
+                        "resource":825975898112,
+                        "size":274877906944,
+                        "interleave_ways":2,
+                        "interleave_granularity":256,
+                        "region":"region0",
+                        "nr_targets":2,
+                        "targets":[
+                            {
+                                "target":"0000:d2:01.1",
+                                "alias":"device:02",
+                                "position":0,
+                                "id":0
+                            },
+                            {
+                                "target":"0000:d2:01.3",
+                                "alias":"device:05",
+                                "position":1,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+Host Bridge :code:`port1` has a single decoder (:code:`decoder1.0`) with two
+targets: :code:`dport1` and :code:`dport3` - which are attached to
+:code:`endpoint5` and :code:`endpoint6` respectively.
+
+The host bridge decoder interleaves these devices at a 256 byte granularity.
+
+The next chunk shows the three CXL host bridges without attached endpoints.
+
+::
+
+            {
+                "port":"port2",
+                "host":"pci0000:00",
+                "depth":1,
+                "nr_dports":2,
+                "dports":[
+                    {
+                        "dport":"0000:00:01.3",
+                        "alias":"device:55",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:00:07.1",
+                        "alias":"device:5d",
+                        "id":113
+                    }
+                ]
+            },
+            {
+                "port":"port3",
+                "host":"pci0000:a8",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:a8:01.1",
+                        "alias":"device:c3",
+                        "id":0
+                    }
+                ],
+            },
+            {
+                "port":"port4",
+                "host":"pci0000:2a",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:2a:01.1",
+                        "alias":"device:d0",
+                        "id":0
+                    }
+                ]
+            }
+        ],
+
+Next we have the `Root Decoders` belonging to :code:`root0`.  This root decoder
+applies the interleave across the downstream ports :code:`port1` and
+:code:`port3` - with a granularity of 256 bytes.
+
+This information is generated by the CXL driver reading the ACPI CEDT CMFWS.
+
+::
+
+        "decoders:root0":[
+            {
+                "decoder":"decoder0.0",
+                "resource":825975898112,
+                "size":274877906944,
+                "interleave_ways":1,
+                "max_available_extent":0,
+                "volatile_capable":true,
+                "nr_targets":2,
+                "targets":[
+                    {
+                        "target":"pci0000:a8",
+                        "alias":"ACPI0016:02",
+                        "position":1,
+                        "id":4
+                    },
+                ],
+
+Finally we have the `Memory Region` associated with the `Root Decoder`
+:code:`decoder0.0`.  This region describes the overall interleave configuration
+of the interleave set.
+
+::
+
+                "regions:decoder0.0":[
+                    {
+                        "region":"region0",
+                        "resource":825975898112,
+                        "size":274877906944,
+                        "type":"ram",
+                        "interleave_ways":2,
+                        "interleave_granularity":256,
+                        "decode_state":"commit",
+                        "mappings":[
+                            {
+                                "position":1,
+                                "memdev":"mem1",
+                                "decoder":"decoder6.0"
+                            },
+                            {
+                                "position":0,
+                                "memdev":"mem0",
+                                "decoder":"decoder5.0"
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    }
+  ]
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/example-configurations/multi-interleave.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/multi-interleave.rst
new file mode 100644
index 000000000000..008f9053c630
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/multi-interleave.rst
@@ -0,0 +1,401 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+Multi-Level Interleave
+======================
+This cxl-cli configuration dump shows the following host configuration:
+
+* A single socket system with one CXL root
+* CXL Root has Four (4) CXL Host Bridges
+* Two CXL Host Bridges have a two CXL Memory Expanders Attached each.
+* The CXL root is configured to interleave across the two host bridges.
+* Each host bridge with expanders interleaves across two endpoints.
+
+This output is generated by :code:`cxl list -v` and describes the relationships
+between objects exposed in :code:`/sys/bus/cxl/devices/`.
+
+::
+
+  [
+    {
+        "bus":"root0",
+        "provider":"ACPI.CXL",
+        "nr_dports":4,
+        "dports":[
+            {
+                "dport":"pci0000:00",
+                "alias":"ACPI0016:01",
+                "id":0
+            },
+            {
+                "dport":"pci0000:a8",
+                "alias":"ACPI0016:02",
+                "id":4
+            },
+            {
+                "dport":"pci0000:2a",
+                "alias":"ACPI0016:03",
+                "id":1
+            },
+            {
+                "dport":"pci0000:d2",
+                "alias":"ACPI0016:00",
+                "id":5
+            }
+        ],
+
+This chunk shows the CXL "bus" (root0) has 4 downstream ports attached to CXL
+Host Bridges.  The `Root` can be considered the singular upstream port attached
+to the platform's memory controller - which routes memory requests to it.
+
+The `ports:root0` section lays out how each of these downstream ports are
+configured.  If a port is not configured (id's 0 and 1), they are omitted.
+
+::
+
+        "ports:root0":[
+            {
+                "port":"port1",
+                "host":"pci0000:d2",
+                "depth":1,
+                "nr_dports":3,
+                "dports":[
+                    {
+                        "dport":"0000:d2:01.1",
+                        "alias":"device:02",
+                        "id":0
+                    },
+                    {
+                        "dport":"0000:d2:01.3",
+                        "alias":"device:05",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:d2:07.1",
+                        "alias":"device:0d",
+                        "id":113
+                    }
+                ],
+
+This chunk shows the available downstream ports associated with the CXL Host
+Bridge :code:`port1`.  In this case, :code:`port1` has 3 available downstream
+ports: :code:`dport0`, :code:`dport2`, and :code:`dport113`.
+
+::
+
+                "endpoints:port1":[
+                    {
+                        "endpoint":"endpoint5",
+                        "host":"mem0",
+                        "parent_dport":"0000:d2:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem0",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:d3:00.0"
+                        },
+                        "decoders:endpoint5":[
+                            {
+                                "decoder":"decoder5.0",
+                                "resource":825975898112,
+                                "size":549755813888,
+                                "interleave_ways":4,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    },
+                    {
+                        "endpoint":"endpoint6",
+                        "host":"mem1",
+                        "parent_dport":"0000:d2:01.3",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem1",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:d3:00.0"
+                        },
+                        "decoders:endpoint6":[
+                            {
+                                "decoder":"decoder6.0",
+                                "resource":825975898112,
+                                "size":549755813888,
+                                "interleave_ways":4,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+
+This chunk shows the endpoints attached to the host bridge :code:`port1`.
+
+:code:`endpoint5` contains a single configured decoder :code:`decoder5.0`
+which has the same interleave configuration as :code:`region0` (shown later).
+
+:code:`endpoint6` contains a single configured decoder :code:`decoder5.0`
+which has the same interleave configuration as :code:`region0` (shown later).
+
+Next we have the decoders belonging to the host bridge:
+
+::
+
+                "decoders:port1":[
+                    {
+                        "decoder":"decoder1.0",
+                        "resource":825975898112,
+                        "size":549755813888,
+                        "interleave_ways":2,
+                        "interleave_granularity":512,
+                        "region":"region0",
+                        "nr_targets":2,
+                        "targets":[
+                            {
+                                "target":"0000:d2:01.1",
+                                "alias":"device:02",
+                                "position":0,
+                                "id":0
+                            },
+                            {
+                                "target":"0000:d2:01.3",
+                                "alias":"device:05",
+                                "position":2,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+Host Bridge :code:`port1` has a single decoder (:code:`decoder1.0`), whose
+targets are :code:`dport0` and :code:`dport2` - which are attached to
+:code:`endpoint5` and :code:`endpoint6` respectively.
+
+The following chunk shows a similar configuration for Host Bridge :code:`port3`,
+the second host bridge with a memory device attached.
+
+::
+
+            {
+                "port":"port3",
+                "host":"pci0000:a8",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:a8:01.1",
+                        "alias":"device:c3",
+                        "id":0
+                    },
+                    {
+                        "dport":"0000:a8:01.3",
+                        "alias":"device:c5",
+                        "id":0
+                    }
+                ],
+                "endpoints:port3":[
+                    {
+                        "endpoint":"endpoint7",
+                        "host":"mem2",
+                        "parent_dport":"0000:a8:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem2",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:a9:00.0"
+                        },
+                        "decoders:endpoint7":[
+                            {
+                                "decoder":"decoder7.0",
+                                "resource":825975898112,
+                                "size":549755813888,
+                                "interleave_ways":4,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    },
+                    {
+                        "endpoint":"endpoint8",
+                        "host":"mem3",
+                        "parent_dport":"0000:a8:01.3",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem3",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:a9:00.0"
+                        },
+                        "decoders:endpoint8":[
+                            {
+                                "decoder":"decoder8.0",
+                                "resource":825975898112,
+                                "size":549755813888,
+                                "interleave_ways":4,
+                                "interleave_granularity":256,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+                "decoders:port3":[
+                    {
+                        "decoder":"decoder3.0",
+                        "resource":825975898112,
+                        "size":549755813888,
+                        "interleave_ways":2,
+                        "interleave_granularity":512,
+                        "region":"region0",
+                        "nr_targets":1,
+                        "targets":[
+                            {
+                                "target":"0000:a8:01.1",
+                                "alias":"device:c3",
+                                "position":1,
+                                "id":0
+                            },
+                            {
+                                "target":"0000:a8:01.3",
+                                "alias":"device:c5",
+                                "position":3,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+
+The next chunk shows the two CXL host bridges without attached endpoints.
+
+::
+
+            {
+                "port":"port2",
+                "host":"pci0000:00",
+                "depth":1,
+                "nr_dports":2,
+                "dports":[
+                    {
+                        "dport":"0000:00:01.3",
+                        "alias":"device:55",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:00:07.1",
+                        "alias":"device:5d",
+                        "id":113
+                    }
+                ]
+            },
+            {
+                "port":"port4",
+                "host":"pci0000:2a",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:2a:01.1",
+                        "alias":"device:d0",
+                        "id":0
+                    }
+                ]
+            }
+        ],
+
+Next we have the `Root Decoders` belonging to :code:`root0`.  This root decoder
+applies the interleave across the downstream ports :code:`port1` and
+:code:`port3` - with a granularity of 256 bytes.
+
+This information is generated by the CXL driver reading the ACPI CEDT CMFWS.
+
+::
+
+        "decoders:root0":[
+            {
+                "decoder":"decoder0.0",
+                "resource":825975898112,
+                "size":549755813888,
+                "interleave_ways":2,
+                "interleave_granularity":256,
+                "max_available_extent":0,
+                "volatile_capable":true,
+                "nr_targets":2,
+                "targets":[
+                    {
+                        "target":"pci0000:a8",
+                        "alias":"ACPI0016:02",
+                        "position":1,
+                        "id":4
+                    },
+                    {
+                        "target":"pci0000:d2",
+                        "alias":"ACPI0016:00",
+                        "position":0,
+                        "id":5
+                    }
+                ],
+
+Finally we have the `Memory Region` associated with the `Root Decoder`
+:code:`decoder0.0`.  This region describes the overall interleave configuration
+of the interleave set.  So we see there are a total of :code:`4` interleave
+targets across 4 endpoint decoders.
+
+::
+
+                "regions:decoder0.0":[
+                    {
+                        "region":"region0",
+                        "resource":825975898112,
+                        "size":549755813888,
+                        "type":"ram",
+                        "interleave_ways":4,
+                        "interleave_granularity":256,
+                        "decode_state":"commit",
+                        "mappings":[
+                            {
+                                "position":3,
+                                "memdev":"mem3",
+                                "decoder":"decoder8.0"
+                            },
+                            {
+                                "position":2,
+                                "memdev":"mem1",
+                                "decoder":"decoder6.0"
+                            }
+                            {
+                                "position":1,
+                                "memdev":"mem2",
+                                "decoder":"decoder7.0"
+                            },
+                            {
+                                "position":0,
+                                "memdev":"mem0",
+                                "decoder":"decoder5.0"
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    }
+  ]
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst
new file mode 100644
index 000000000000..5fd38eb0aaf4
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/example-configurations/single-device.rst
@@ -0,0 +1,246 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Single Device
+=============
+This cxl-cli configuration dump shows the following host configuration:
+
+* A single socket system with one CXL root
+* CXL Root has Four (4) CXL Host Bridges
+* One CXL Host Bridges has a single CXL Memory Expander Attached
+* No interleave is present.
+
+This output is generated by :code:`cxl list -v` and describes the relationships
+between objects exposed in :code:`/sys/bus/cxl/devices/`.
+
+::
+
+  [
+    {
+        "bus":"root0",
+        "provider":"ACPI.CXL",
+        "nr_dports":4,
+        "dports":[
+            {
+                "dport":"pci0000:00",
+                "alias":"ACPI0016:01",
+                "id":0
+            },
+            {
+                "dport":"pci0000:a8",
+                "alias":"ACPI0016:02",
+                "id":4
+            },
+            {
+                "dport":"pci0000:2a",
+                "alias":"ACPI0016:03",
+                "id":1
+            },
+            {
+                "dport":"pci0000:d2",
+                "alias":"ACPI0016:00",
+                "id":5
+            }
+        ],
+
+This chunk shows the CXL "bus" (root0) has 4 downstream ports attached to CXL
+Host Bridges.  The `Root` can be considered the singular upstream port attached
+to the platform's memory controller - which routes memory requests to it.
+
+The `ports:root0` section lays out how each of these downstream ports are
+configured.  If a port is not configured (id's 0, 1, and 4), they are omitted.
+
+::
+
+        "ports:root0":[
+            {
+                "port":"port1",
+                "host":"pci0000:d2",
+                "depth":1,
+                "nr_dports":3,
+                "dports":[
+                    {
+                        "dport":"0000:d2:01.1",
+                        "alias":"device:02",
+                        "id":0
+                    },
+                    {
+                        "dport":"0000:d2:01.3",
+                        "alias":"device:05",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:d2:07.1",
+                        "alias":"device:0d",
+                        "id":113
+                    }
+                ],
+
+This chunk shows the available downstream ports associated with the CXL Host
+Bridge :code:`port1`.  In this case, :code:`port1` has 3 available downstream
+ports: :code:`dport1`, :code:`dport2`, and :code:`dport113`..
+
+::
+
+                "endpoints:port1":[
+                    {
+                        "endpoint":"endpoint5",
+                        "host":"mem0",
+                        "parent_dport":"0000:d2:01.1",
+                        "depth":2,
+                        "memdev":{
+                            "memdev":"mem0",
+                            "ram_size":137438953472,
+                            "serial":0,
+                            "numa_node":0,
+                            "host":"0000:d3:00.0"
+                        },
+                        "decoders:endpoint5":[
+                            {
+                                "decoder":"decoder5.0",
+                                "resource":825975898112,
+                                "size":137438953472,
+                                "interleave_ways":1,
+                                "region":"region0",
+                                "dpa_resource":0,
+                                "dpa_size":137438953472,
+                                "mode":"ram"
+                            }
+                        ]
+                    }
+                ],
+
+This chunk shows the endpoints attached to the host bridge :code:`port1`.
+
+:code:`endpoint5` contains a single configured decoder :code:`decoder5.0`
+which has the same interleave configuration as :code:`region0` (shown later).
+
+Next we have the decoders belonging to the host bridge:
+
+::
+
+                "decoders:port1":[
+                    {
+                        "decoder":"decoder1.0",
+                        "resource":825975898112,
+                        "size":137438953472,
+                        "interleave_ways":1,
+                        "region":"region0",
+                        "nr_targets":1,
+                        "targets":[
+                            {
+                                "target":"0000:d2:01.1",
+                                "alias":"device:02",
+                                "position":0,
+                                "id":0
+                            }
+                        ]
+                    }
+                ]
+            },
+
+Host Bridge :code:`port1` has a single decoder (:code:`decoder1.0`), whose only
+target is :code:`dport1` - which is attached to :code:`endpoint5`.
+
+The next chunk shows the three CXL host bridges without attached endpoints.
+
+::
+
+            {
+                "port":"port2",
+                "host":"pci0000:00",
+                "depth":1,
+                "nr_dports":2,
+                "dports":[
+                    {
+                        "dport":"0000:00:01.3",
+                        "alias":"device:55",
+                        "id":2
+                    },
+                    {
+                        "dport":"0000:00:07.1",
+                        "alias":"device:5d",
+                        "id":113
+                    }
+                ]
+            },
+            {
+                "port":"port3",
+                "host":"pci0000:a8",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:a8:01.1",
+                        "alias":"device:c3",
+                        "id":0
+                    }
+                ]
+            },
+            {
+                "port":"port4",
+                "host":"pci0000:2a",
+                "depth":1,
+                "nr_dports":1,
+                "dports":[
+                    {
+                        "dport":"0000:2a:01.1",
+                        "alias":"device:d0",
+                        "id":0
+                    }
+                ]
+            }
+        ],
+
+Next we have the `Root Decoders` belonging to :code:`root0`.  This root decoder
+is a pass-through decoder because :code:`interleave_ways` is set to :code:`1`.
+
+This information is generated by the CXL driver reading the ACPI CEDT CMFWS.
+
+::
+
+        "decoders:root0":[
+            {
+                "decoder":"decoder0.0",
+                "resource":825975898112,
+                "size":137438953472,
+                "interleave_ways":1,
+                "max_available_extent":0,
+                "volatile_capable":true,
+                "nr_targets":1,
+                "targets":[
+                    {
+                        "target":"pci0000:d2",
+                        "alias":"ACPI0016:00",
+                        "position":0,
+                        "id":5
+                    }
+                ],
+
+Finally we have the `Memory Region` associated with the `Root Decoder`
+:code:`decoder0.0`.  This region describes the discrete region associated
+with the lone device.
+
+::
+
+                "regions:decoder0.0":[
+                    {
+                        "region":"region0",
+                        "resource":825975898112,
+                        "size":137438953472,
+                        "type":"ram",
+                        "interleave_ways":1,
+                        "decode_state":"commit",
+                        "mappings":[
+                            {
+                                "position":0,
+                                "memdev":"mem0",
+                                "decoder":"decoder5.0"
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    }
+  ]
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/memory-hotplug.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/memory-hotplug.rst
new file mode 100644
index 000000000000..af368c2bc9cf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/memory-hotplug.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+Memory Hotplug
+==============
+The final phase of surfacing CXL memory to the kernel page allocator is for
+the `DAX` driver to surface a `Driver Managed` memory region via the
+memory-hotplug component.
+
+There are four major configurations to consider:
+
+1) Default Online Behavior (on/off and zone)
+2) Hotplug Memory Block size
+3) Memory Map Resource location
+4) Driver-Managed Memory Designation
+
+Default Online Behavior
+=======================
+The default-online behavior of hotplug memory is dictated by the following,
+in order of precedence:
+
+- :code:`CONFIG_MHP_DEFAULT_ONLINE_TYPE` Build Configuration
+- :code:`memhp_default_state` Boot parameter
+- :code:`/sys/devices/system/memory/auto_online_blocks` value
+
+These dictate whether hotplugged memory blocks arrive in one of three states:
+
+1) Offline
+2) Online in :code:`ZONE_NORMAL`
+3) Online in :code:`ZONE_MOVABLE`
+
+:code:`ZONE_NORMAL` implies this capacity may be used for almost any allocation,
+while :code:`ZONE_MOVABLE` implies this capacity should only be used for
+migratable allocations.
+
+:code:`ZONE_MOVABLE` attempts to retain the hotplug-ability of a memory block
+so that it the entire region may be hot-unplugged at a later time.  Any capacity
+onlined into :code:`ZONE_NORMAL` should be considered permanently attached to
+the page allocator.
+
+Hotplug Memory Block Size
+=========================
+By default, on most architectures, the Hotplug Memory Block Size is either
+128MB or 256MB.  On x86, the block size increases up to 2GB as total memory
+capacity exceeds 64GB.  As of v6.15, Linux does not take into account the
+size and alignment of the ACPI CEDT CFMWS regions (see Early Boot docs) when
+deciding the Hotplug Memory Block Size.
+
+Memory Map
+==========
+The location of :code:`struct folio` allocations to represent the hotplugged
+memory capacity are dictated by the following system settings:
+
+- :code:`/sys_module/memory_hotplug/parameters/memmap_on_memory`
+- :code:`/sys/bus/dax/devices/daxN.Y/memmap_on_memory`
+
+If both of these parameters are set to true, :code:`struct folio` for this
+capacity will be carved out of the memory block being onlined.  This has
+performance implications if the memory is particularly high-latency and
+its :code:`struct folio` becomes hotly contended.
+
+If either parameter is set to false, :code:`struct folio` for this capacity
+will be allocated from the local node of the processor running the hotplug
+procedure.  This capacity will be allocated from :code:`ZONE_NORMAL` on
+that node, as it is a :code:`GFP_KERNEL` allocation.
+
+Systems with extremely large amounts of :code:`ZONE_MOVABLE` memory (e.g.
+CXL memory pools) must ensure that there is sufficient local
+:code:`ZONE_NORMAL` capacity to host the memory map for the hotplugged capacity.
+
+Driver Managed Memory
+=====================
+The DAX driver surfaces this memory to memory-hotplug as "Driver Managed". This
+is not a configurable setting, but it's important to note that driver managed
+memory is explicitly excluded from use during kexec.  This is required to ensure
+any reset or out-of-band operations that the CXL device may be subject to during
+a functional system-reboot (such as a reset-on-probe) will not cause portions of
+the kexec kernel to be overwritten.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/linux/overview.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/overview.rst
new file mode 100644
index 000000000000..648beb2c8c83
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/linux/overview.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
+Overview
+========
+
+This section presents the configuration process of a CXL Type-3 memory device,
+and how it is ultimately exposed to users as either a :code:`DAX` device or
+normal memory pages via the kernel's page allocator.
+
+Portions marked with a bullet are points at which certain kernel objects
+are generated.
+
+1) Early Boot
+
+  a) BIOS, Build, and Boot Parameters
+
+    i) EFI_MEMORY_SP
+    ii) CONFIG_EFI_SOFT_RESERVE
+    iii) CONFIG_MHP_DEFAULT_ONLINE_TYPE
+    iv) nosoftreserve
+
+  b) Memory Map Creation
+
+    i) EFI Memory Map / E820 Consulted for Soft-Reserved
+
+      * CXL Memory is set aside to be handled by the CXL driver
+
+      * Soft-Reserved IO Resource created for CFMWS entry
+
+  c) NUMA Node Creation
+
+    * Nodes created from ACPI CEDT CFMWS and SRAT Proximity domains (PXM)
+
+  d) Memory Tier Creation
+
+    * A default memory_tier is created with all nodes.
+
+  e) Contiguous Memory Allocation
+
+    * Any requested CMA is allocated from Online nodes
+
+  f) Init Finishes, Drivers start probing
+
+2) ACPI and PCI Drivers
+
+  a) Detects PCI device is CXL, marking it for probe by CXL driver
+
+3) CXL Driver Operation
+
+  a) Base device creation
+
+    * root, port, and memdev devices created
+    * CEDT CFMWS IO Resource creation
+
+  b) Decoder creation
+
+    * root, switch, and endpoint decoders created
+
+  c) Logical device creation
+
+    * memory_region and endpoint devices created
+
+  d) Devices are associated with each other
+
+    * If auto-decoder (BIOS-programmed decoders), driver validates
+      configurations, builds associations, and locks configs at probe time.
+
+    * If user-configured, validation and associations are built at
+      decoder-commit time.
+
+  e) Regions surfaced as DAX region
+
+    * dax_region created
+
+    * DAX device created via DAX driver
+
+4) DAX Driver Operation
+
+  a) DAX driver surfaces DAX region as one of two dax device modes
+
+    * kmem - dax device is converted to hotplug memory blocks
+
+      * DAX kmem IO Resource creation
+
+    * hmem - dax device is left as daxdev to be accessed as a file.
+
+      * If hmem, journey ends here.
+
+  b) DAX kmem surfaces memory region to Memory Hotplug to add to page
+     allocator as "driver managed memory"
+
+5) Memory Hotplug
+
+  a) mhp component surfaces a dax device memory region as multiple memory
+     blocks to the page allocator
+
+    * blocks appear in :code:`/sys/bus/memory/devices` and linked to a NUMA node
+
+  b) blocks are onlined into the requested zone (NORMAL or MOVABLE)
+
+    * Memory is marked "Driver Managed" to avoid kexec from using it as region
+      for kernel updates
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/maturity-map.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/maturity-map.rst
index a2288f9df658..1330f3f52129 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/cxl/maturity-map.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/maturity-map.rst
@@ -51,9 +51,9 @@ in place, but there are several corner cases that are pending closure.
 
 * [2] CXL Window Enumeration
 
-  * [0] :ref:`Extended-linear memory-side cache <extended-linear>`
+  * [2] :ref:`Extended-linear memory-side cache <extended-linear>`
   * [0] Low Memory-hole
-  * [0] Hetero-interleave
+  * [X] Hetero-interleave
 
 * [2] Switch Enumeration
 
@@ -173,7 +173,7 @@ Accelerator
 User Flow Support
 -----------------
 
-* [0] HPA->DPA Address translation (need xormaps export solution)
+* [0] Inject & clear poison by HPA
 
 Details
 =======
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi.rst
new file mode 100644
index 000000000000..ee7e6bd4c43d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+ACPI Tables
+===========
+
+ACPI is the "Advanced Configuration and Power Interface", which is a standard
+that defines how platforms and OS manage power and configure computer hardware.
+For the purpose of this theory of operation, when referring to "ACPI" we will
+usually refer to "ACPI Tables" - which are the way a platform (BIOS/EFI)
+communicates static configuration information to the operation system.
+
+The Following ACPI tables contain *static* configuration and performance data
+about CXL devices.
+
+.. toctree::
+   :maxdepth: 1
+
+   acpi/cedt.rst
+   acpi/srat.rst
+   acpi/hmat.rst
+   acpi/slit.rst
+   acpi/dsdt.rst
+
+The SRAT table may also contain generic port/initiator content that is intended
+to describe the generic port, but not information about the rest of the path to
+the endpoint.
+
+Linux uses these tables to configure kernel resources for statically configured
+(by BIOS/EFI) CXL devices, such as:
+
+- NUMA nodes
+- Memory Tiers
+- NUMA Abstract Distances
+- SystemRAM Memory Regions
+- Weighted Interleave Node Weights
+
+ACPI Debugging
+==============
+
+The :code:`acpidump -b` command dumps the ACPI tables into binary format.
+
+The :code:`iasl -d` command disassembles the files into human readable format.
+
+Example :code:`acpidump -b && iasl -d cedt.dat` ::
+
+   [000h 0000   4]   Signature : "CEDT"    [CXL Early Discovery Table]
+
+Common Issues
+-------------
+Most failures described here result in a failure of the driver to surface
+memory as a DAX device and/or kmem.
+
+* CEDT CFMWS targets list UIDs do not match CEDT CHBS UIDs.
+* CEDT CFMWS targets list UIDs do not match DSDT CXL Host Bridge UIDs.
+* CEDT CFMWS Restriction Bits are not correct.
+* CEDT CFMWS Memory regions are poorly aligned.
+* CEDT CFMWS Memory regions spans a platform memory hole.
+* CEDT CHBS UIDs do not match DSDT CXL Host Bridge UIDs.
+* CEDT CHBS Specification version is incorrect.
+* SRAT is missing regions described in CEDT CFMWS.
+
+  * Result: failure to create a NUMA node for the region, or
+    region is placed in wrong node.
+
+* HMAT is missing data for regions described in CEDT CFMWS.
+
+  * Result: NUMA node being placed in the wrong memory tier.
+
+* SLIT has bad data.
+
+  * Result: Lots of performance mechanisms in the kernel will be very unhappy.
+
+All of these issues will appear to users as if the driver is failing to
+support CXL - when in reality they are all the failure of a platform to
+configure the ACPI tables correctly.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi/cedt.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/cedt.rst
new file mode 100644
index 000000000000..1d9c9d3592dc
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/cedt.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+CEDT - CXL Early Discovery Table
+================================
+
+The CXL Early Discovery Table is generated by BIOS to describe the CXL memory
+regions configured at boot by the BIOS.
+
+CHBS
+====
+The CXL Host Bridge Structure describes CXL host bridges.  Other than describing
+device register information, it reports the specific host bridge UID for this
+host bridge.  These host bridge ID's will be referenced in other tables.
+
+Example ::
+
+          Subtable Type : 00 [CXL Host Bridge Structure]
+               Reserved : 00
+                 Length : 0020
+ Associated host bridge : 00000007    <- Host bridge _UID
+  Specification version : 00000001
+               Reserved : 00000000
+          Register base : 0000010370400000
+        Register length : 0000000000010000
+
+CFMWS
+=====
+The CXL Fixed Memory Window structure describes a memory region associated
+with one or more CXL host bridges (as described by the CHBS).  It additionally
+describes any inter-host-bridge interleave configuration that may have been
+programmed by BIOS.
+
+Example ::
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 000000C050000000   <- Memory Region
+              Window size : 0000003CA0000000
+ Interleave Members (2^n) : 01                 <- Interleave configuration
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007           <- Host Bridge _UID
+              Next Target : 00000006           <- Host Bridge _UID
+
+The restriction field dictates what this SPA range may be used for (memory type,
+voltile vs persistent, etc). One or more bits may be set. ::
+
+  Bit[0]: CXL Type 2 Memory
+  Bit[1]: CXL Type 3 Memory
+  Bit[2]: Volatile Memory
+  Bit[3]: Persistent Memory
+  Bit[4]: Fixed Config (HPA cannot be re-used)
+
+INTRA-host-bridge interleave (multiple devices on one host bridge) is NOT
+reported in this structure, and is solely defined via CXL device decoder
+programming (host bridge and endpoint decoders).
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi/dsdt.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/dsdt.rst
new file mode 100644
index 000000000000..b4583b01d67d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/dsdt.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================================
+DSDT - Differentiated system Description Table
+==============================================
+
+This table describes what peripherals a machine has.
+
+This table's UIDs for CXL devices - specifically host bridges, must be
+consistent with the contents of the CEDT, otherwise the CXL driver will
+fail to probe correctly.
+
+Example Compute Express Link Host Bridge ::
+
+    Scope (_SB)
+    {
+        Device (S0D0)
+        {
+            Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+            Name (_CID, Package (0x02)  // _CID: Compatible ID
+            {
+                EisaId ("PNP0A08") /* PCI Express Bus */,
+                EisaId ("PNP0A03") /* PCI Bus */
+            })
+            ...
+            Name (_UID, 0x05)  // _UID: Unique ID
+            ...
+      }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi/hmat.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/hmat.rst
new file mode 100644
index 000000000000..095a26f02a37
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/hmat.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================
+HMAT - Heterogeneous Memory Attribute Table
+===========================================
+
+The Heterogeneous Memory Attributes Table contains information such as cache
+attributes and bandwidth and latency details for memory proximity domains.
+For the purpose of this document, we will only discuss the SSLIB entry.
+
+SLLBI
+=====
+The System Locality Latency and Bandwidth Information records latency and
+bandwidth information for proximity domains.
+
+This table is used by Linux to configure interleave weights and memory tiers.
+
+Example (Heavily truncated for brevity) ::
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 00         <- Latency
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+                        Entry : 0080       <- DRAM LTC
+                        Entry : 0100       <- CXL LTC
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 03         <- Bandwidth
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+                        Entry : 1200       <- DRAM BW
+                        Entry : 0200       <- CXL BW
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi/slit.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/slit.rst
new file mode 100644
index 000000000000..a56768e8fe41
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/slit.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+SLIT - System Locality Information Table
+========================================
+
+The system locality information table provides "abstract distances" between
+accessor and memory nodes.  Node without initiators (cpus) are infinitely (FF)
+distance away from all other nodes.
+
+The abstract distance described in this table does not describe any real
+latency of bandwidth information.
+
+Example ::
+
+    Signature : "SLIT"    [System Locality Information Table]
+   Localities : 0000000000000004
+ Locality   0 : 10 20 20 30
+ Locality   1 : 20 10 30 20
+ Locality   2 : FF FF 0A FF
+ Locality   3 : FF FF FF 0A
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/acpi/srat.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/srat.rst
new file mode 100644
index 000000000000..cc98ca0e508e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/acpi/srat.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+SRAT - Static Resource Affinity Table
+=====================================
+
+The System/Static Resource Affinity Table describes resource (CPU, Memory)
+affinity to "Proximity Domains". This table is technically optional, but for
+performance information (see "HMAT") to be enumerated by linux it must be
+present.
+
+There is a careful dance between the CEDT and SRAT tables and how NUMA nodes are
+created.  If things don't look quite the way you expect - check the SRAT Memory
+Affinity entries and CEDT CFMWS to determine what your platform actually
+supports in terms of flexible topologies.
+
+The SRAT may statically assign portions of a CFMWS SPA range to a specific
+proximity domains.  See linux numa creation for more information about how
+this presents in the NUMA topology.
+
+Proximity Domain
+================
+A proximity domain is ROUGHLY equivalent to "NUMA Node" - though a 1-to-1
+mapping is not guaranteed.  There are scenarios where "Proximity Domain 4" may
+map to "NUMA Node 3", for example.  (See "NUMA Node Creation")
+
+Memory Affinity
+===============
+Generally speaking, if a host does any amount of CXL fabric (decoder)
+programming in BIOS - an SRAT entry for that memory needs to be present.
+
+Example ::
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000001          <- NUMA Node 1
+             Reserved1 : 0000
+          Base Address : 000000C050000000  <- Physical Memory Region
+        Address Length : 0000003CA0000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+              Enabled : 1
+        Hot Pluggable : 1
+         Non-Volatile : 0
+
+
+Generic Port Affinity
+=====================
+The Generic Port Affinity subtable provides an association between a proximity
+domain and a device handle representing a Generic Port such as a CXL host
+bridge. With the association, latency and bandwidth numbers can be retrieved
+from the SRAT for the path between CPU(s) (initiator) and the Generic Port.
+This is used to construct performance coordinates for hotplugged CXL DEVICES,
+which cannot be enumerated at boot by platform firmware.
+
+Example ::
+
+         Subtable Type : 06 [Generic Port Affinity]
+                Length : 20               <- 32d, length of table
+              Reserved : 00
+    Device Handle Type : 00               <- 0 - ACPI, 1 - PCI
+      Proximity Domain : 00000001
+         Device Handle : ACPI0016:01
+                 Flags : 00000001         <- Bit 0 (Enabled)
+              Reserved : 00000000
+
+The Proximity Domain is matched up to the :doc:`HMAT <hmat>` SSLBI Target
+Proximity Domain List for the related latency or bandwidth numbers. Those
+performance numbers are tied to a CXL host bridge via the Device Handle.
+The driver uses the association to retrieve the Generic Port performance
+numbers for the whole CXL path access coordinates calculation.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/bios-and-efi.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/bios-and-efi.rst
new file mode 100644
index 000000000000..645322632cc9
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/bios-and-efi.rst
@@ -0,0 +1,262 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+BIOS/EFI Configuration
+======================
+
+BIOS and EFI are largely responsible for configuring static information about
+devices (or potential future devices) such that Linux can build the appropriate
+logical representations of these devices.
+
+At a high level, this is what occurs during this phase of configuration.
+
+* The bootloader starts the BIOS/EFI.
+
+* BIOS/EFI do early device probe to determine static configuration
+
+* BIOS/EFI creates ACPI Tables that describe static config for the OS
+
+* BIOS/EFI create the system memory map (EFI Memory Map, E820, etc)
+
+* BIOS/EFI calls :code:`start_kernel` and begins the Linux Early Boot process.
+
+Much of what this section is concerned with is ACPI Table production and
+static memory map configuration. More detail on these tables can be found
+at :doc:`ACPI Tables <acpi>`.
+
+.. note::
+   Platform Vendors should read carefully, as this sections has recommendations
+   on physical memory region size and alignment, memory holes, HDM interleave,
+   and what linux expects of HDM decoders trying to work with these features.
+
+UEFI Settings
+=============
+If your platform supports it, the :code:`uefisettings` command can be used to
+read/write EFI settings. Changes will be reflected on the next reboot. Kexec
+is not a sufficient reboot.
+
+One notable configuration here is the EFI_MEMORY_SP (Specific Purpose) bit.
+When this is enabled, this bit tells linux to defer management of a memory
+region to a driver (in this case, the CXL driver). Otherwise, the memory is
+treated as "normal memory", and is exposed to the page allocator during
+:code:`__init`.
+
+uefisettings examples
+---------------------
+
+:code:`uefisettings identify` ::
+
+        uefisettings identify
+
+        bios_vendor: xxx
+        bios_version: xxx
+        bios_release: xxx
+        bios_date: xxx
+        product_name: xxx
+        product_family: xxx
+        product_version: xxx
+
+On some AMD platforms, the :code:`EFI_MEMORY_SP` bit is set via the :code:`CXL
+Memory Attribute` field.  This may be called something else on your platform.
+
+:code:`uefisettings get "CXL Memory Attribute"` ::
+
+        selector: xxx
+        ...
+        question: Question {
+            name: "CXL Memory Attribute",
+            answer: "Enabled",
+            ...
+        }
+
+Physical Memory Map
+===================
+
+Physical Address Region Alignment
+---------------------------------
+
+As of Linux v6.14, the hotplug memory system requires memory regions to be
+uniform in size and alignment.  While the CXL specification allows for memory
+regions as small as 256MB, the supported memory block size and alignment for
+hotplugged memory is architecture-defined.
+
+A Linux memory blocks may be as small as 128MB and increase in powers of two.
+
+* On ARM, the default block size and alignment is either 128MB or 256MB.
+
+* On x86, the default block size is 256MB, and increases to 2GB as the
+  capacity of the system increases up to 64GB.
+
+For best support across versions, platform vendors should place CXL memory at
+a 2GB aligned base address, and regions should be 2GB aligned.  This also helps
+prevent the creating thousands of memory devices (one per block).
+
+Memory Holes
+------------
+
+Holes in the memory map are tricky.  Consider a 4GB device located at base
+address 0x100000000, but with the following memory map ::
+
+  ---------------------
+  |    0x100000000    |
+  |        CXL        |
+  |    0x1BFFFFFFF    |
+  ---------------------
+  |    0x1C0000000    |
+  |    MEMORY HOLE    |
+  |    0x1FFFFFFFF    |
+  ---------------------
+  |    0x200000000    |
+  |     CXL CONT.     |
+  |    0x23FFFFFFF    |
+  ---------------------
+
+There are two issues to consider:
+
+* decoder programming, and
+* memory block alignment.
+
+If your architecture requires 2GB uniform size and aligned memory blocks, the
+only capacity Linux is capable of mapping (as of v6.14) would be the capacity
+from `0x100000000-0x180000000`.  The remaining capacity will be stranded, as
+they are not of 2GB aligned length.
+
+Assuming your architecture and memory configuration allows 1GB memory blocks,
+this memory map is supported and this should be presented as multiple CFMWS
+in the CEDT that describe each side of the memory hole separately - along with
+matching decoders.
+
+Multiple decoders can (and should) be used to manage such a memory hole (see
+below), but each chunk of a memory hole should be aligned to a reasonable block
+size (larger alignment is always better).  If you intend to have memory holes
+in the memory map, expect to use one decoder per contiguous chunk of host
+physical memory.
+
+As of v6.14, Linux does provide support for memory hotplug of multiple
+physical memory regions separated by a memory hole described by a single
+HDM decoder.
+
+
+Decoder Programming
+===================
+If BIOS/EFI intends to program the decoders to be statically configured,
+there are a few things to consider to avoid major pitfalls that will
+prevent Linux compatibility.  Some of these recommendations are not
+required "per the specification", but Linux makes no guarantees of support
+otherwise.
+
+
+Translation Point
+-----------------
+Per the specification, the only decoders which **TRANSLATE** Host Physical
+Address (HPA) to Device Physical Address (DPA) are the **Endpoint Decoders**.
+All other decoders in the fabric are intended to route accesses without
+translating the addresses.
+
+This is heavily implied by the specification, see: ::
+
+  CXL Specification 3.1
+  8.2.4.20: CXL HDM Decoder Capability Structure
+  - Implementation Note: CXL Host Bridge and Upstream Switch Port Decoder Flow
+  - Implementation Note: Device Decoder Logic
+
+Given this, Linux makes a strong assumption that decoders between CPU and
+endpoint will all be programmed with addresses ranges that are subsets of
+their parent decoder.
+
+Due to some ambiguity in how Architecture, ACPI, PCI, and CXL specifications
+"hand off" responsibility between domains, some early adopting platforms
+attempted to do translation at the originating memory controller or host
+bridge.  This configuration requires a platform specific extension to the
+driver and is not officially endorsed - despite being supported.
+
+It is *highly recommended* **NOT** to do this; otherwise, you are on your own
+to implement driver support for your platform.
+
+Interleave and Configuration Flexibility
+----------------------------------------
+If providing cross-host-bridge interleave, a CFMWS entry in the :doc:`CEDT
+<acpi/cedt>` must be presented with target host-bridges for the interleaved
+device sets (there may be multiple behind each host bridge).
+
+If providing intra-host-bridge interleaving, only 1 CFMWS entry in the CEDT is
+required for that host bridge - if it covers the entire capacity of the devices
+behind the host bridge.
+
+If intending to provide users flexibility in programming decoders beyond the
+root, you may want to provide multiple CFMWS entries in the CEDT intended for
+different purposes.  For example, you may want to consider adding:
+
+1) A CFMWS entry to cover all interleavable host bridges.
+2) A CFMWS entry to cover all devices on a single host bridge.
+3) A CFMWS entry to cover each device.
+
+A platform may choose to add all of these, or change the mode based on a BIOS
+setting.  For each CFMWS entry, Linux expects descriptions of the described
+memory regions in the :doc:`SRAT <acpi/srat>` to determine the number of
+NUMA nodes it should reserve during early boot / init.
+
+As of v6.14, Linux will create a NUMA node for each CEDT CFMWS entry, even if
+a matching SRAT entry does not exist; however, this is not guaranteed in the
+future and such a configuration should be avoided.
+
+Memory Holes
+------------
+If your platform includes memory holes intersparsed between your CXL memory, it
+is recommended to utilize multiple decoders to cover these regions of memory,
+rather than try to program the decoders to accept the entire range and expect
+Linux to manage the overlap.
+
+For example, consider the Memory Hole described above ::
+
+  ---------------------
+  |    0x100000000    |
+  |        CXL        |
+  |    0x1BFFFFFFF    |
+  ---------------------
+  |    0x1C0000000    |
+  |    MEMORY HOLE    |
+  |    0x1FFFFFFFF    |
+  ---------------------
+  |    0x200000000    |
+  |     CXL CONT.     |
+  |    0x23FFFFFFF    |
+  ---------------------
+
+Assuming this is provided by a single device attached directly to a host bridge,
+Linux would expect the following decoder programming ::
+
+     -----------------------   -----------------------
+     | root-decoder-0      |   | root-decoder-1      |
+     |   base: 0x100000000 |   |   base: 0x200000000 |
+     |   size:  0xC0000000 |   |   size:  0x40000000 |
+     -----------------------   -----------------------
+                |                         |
+     -----------------------   -----------------------
+     | HB-decoder-0        |   | HB-decoder-1        |
+     |   base: 0x100000000 |   |   base: 0x200000000 |
+     |   size:  0xC0000000 |   |   size:  0x40000000 |
+     -----------------------   -----------------------
+                |                         |
+     -----------------------   -----------------------
+     | ep-decoder-0        |   | ep-decoder-1        |
+     |   base: 0x100000000 |   |   base: 0x200000000 |
+     |   size:  0xC0000000 |   |   size:  0x40000000 |
+     -----------------------   -----------------------
+
+With a CEDT configuration with two CFMWS describing the above root decoders.
+
+Linux makes no guarantee of support for strange memory hole situations.
+
+Multi-Media Devices
+-------------------
+The CFMWS field of the CEDT has special restriction bits which describe whether
+the described memory region allows volatile or persistent memory (or both). If
+the platform intends to support either:
+
+1) A device with multiple medias, or
+2) Using a persistent memory device as normal memory
+
+A platform may wish to create multiple CEDT CFMWS entries to describe the same
+memory, with the intent of allowing the end user flexibility in how that memory
+is configured. Linux does not presently have strong requirements in this area.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/cdat.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/cdat.rst
new file mode 100644
index 000000000000..34bbe7264d71
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/cdat.rst
@@ -0,0 +1,118 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Coherent Device Attribute Table (CDAT)
+======================================
+
+The CDAT provides functional and performance attributes of devices such
+as CXL accelerators, switches, or endpoints.  The table formatting is
+similar to ACPI tables. CDAT data may be parsed by BIOS at boot or may
+be enumerated at runtime (after device hotplug, for example).
+
+Terminology:
+DPA - Device Physical Address, used by the CXL device to denote the address
+it supports for that device.
+
+DSMADHandle - A device unique handle that is associated with a DPA range
+defined by the DSMAS table.
+
+
+===============================================
+Device Scoped Memory Affinity Structure (DSMAS)
+===============================================
+
+The DSMAS contains information such as DSMADHandle, the DPA Base, and DPA
+Length.
+
+This table is used by Linux in conjunction with the Device Scoped Latency and
+Bandwidth Information Structure (DSLBIS) to determine the performance
+attributes of the CXL device itself.
+
+Example ::
+
+ Structure Type : 00 [DSMAS]
+       Reserved : 00
+         Length : 0018              <- 24d, size of structure
+    DSMADHandle : 01
+          Flags : 00
+       Reserved : 0000
+       DPA Base : 0000000040000000  <- 1GiB base
+     DPA Length : 0000000080000000  <- 2GiB size
+
+
+==================================================================
+Device Scoped Latency and Bandwidth Information Structure (DSLBIS)
+==================================================================
+
+This table is used by Linux in conjunction with DSMAS to determine the
+performance attributes of a CXL device.  The DSLBIS contains latency
+and bandwidth information based on DSMADHandle matching.
+
+Example ::
+
+   Structure Type : 01 [DSLBIS]
+         Reserved : 00
+           Length : 18                     <- 24d, size of structure
+           Handle : 0001                   <- DSMAS handle
+            Flags : 00                     <- Matches flag field for HMAT SLLBIS
+        Data Type : 00                     <- Latency
+ Entry Basee Unit : 0000000000001000       <- Entry Base Unit field in HMAT SSLBIS
+            Entry : 010000000000           <- First byte used here, CXL LTC
+         Reserved : 0000
+
+   Structure Type : 01 [DSLBIS]
+         Reserved : 00
+           Length : 18                     <- 24d, size of structure
+           Handle : 0001                   <- DSMAS handle
+            Flags : 00                     <- Matches flag field for HMAT SLLBIS
+        Data Type : 03                     <- Bandwidth
+ Entry Basee Unit : 0000000000001000       <- Entry Base Unit field in HMAT SSLBIS
+            Entry : 020000000000           <- First byte used here, CXL BW
+         Reserved : 0000
+
+
+==================================================================
+Switch Scoped Latency and Bandwidth Information Structure (SSLBIS)
+==================================================================
+
+The SSLBIS contains information about the latency and bandwidth of a switch.
+
+The table is used by Linux to compute the performance coordinates of a CXL path
+from the device to the root port where a switch is part of the path.
+
+Example ::
+
+  Structure Type : 05 [SSLBIS]
+        Reserved : 00
+          Length : 20                           <- 32d, length of record, including SSLB entries
+       Data Type : 00                           <- Latency
+        Reserved : 000000
+ Entry Base Unit : 00000000000000001000         <- Matches Entry Base Unit in HMAT SSLBIS
+
+                                                <- SSLB Entry 0
+       Port X ID : 0100                         <- First port, 0100h represents an upstream port
+       Port Y ID : 0000                         <- Second port, downstream port 0
+         Latency : 0100                         <- Port latency
+        Reserved : 0000
+                                                <- SSLB Entry 1
+       Port X ID : 0100
+       Port Y ID : 0001
+         Latency : 0100
+        Reserved : 0000
+
+
+  Structure Type : 05 [SSLBIS]
+        Reserved : 00
+          Length : 18                           <- 24d, length of record, including SSLB entry
+       Data Type : 03                           <- Bandwidth
+        Reserved : 000000
+ Entry Base Unit : 00000000000000001000         <- Matches Entry Base Unit in HMAT SSLBIS
+
+                                                <- SSLB Entry 0
+       Port X ID : 0100                         <- First port, 0100h represents an upstream port
+       Port Y ID : FFFF                         <- Second port, FFFFh indicates any port
+       Bandwidth : 1200                         <- Port bandwidth
+        Reserved : 0000
+
+The CXL driver uses a combination of CDAT, HMAT, SRAT, and other data to
+generate "whole path performance" data for a CXL device.
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/example-configs.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configs.rst
new file mode 100644
index 000000000000..90a10d7473c6
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configs.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Example Platform Configurations
+###############################
+
+.. toctree::
+   :maxdepth: 1
+   :caption: Contents
+
+   example-configurations/one-dev-per-hb.rst
+   example-configurations/multi-dev-per-hb.rst
+   example-configurations/hb-interleave.rst
+   example-configurations/flexible.rst
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/example-configurations/flexible.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/flexible.rst
new file mode 100644
index 000000000000..dab704b6fcc2
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/flexible.rst
@@ -0,0 +1,296 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Flexible Presentation
+=====================
+This system has a single socket with two CXL host bridges. Each host bridge
+has two CXL memory expanders with a 4GB of memory (32GB total).
+
+On this system, the platform designer wanted to provide the user flexibility
+to configure the memory devices in various interleave or NUMA node
+configurations.  So they provided every combination.
+
+Things to note:
+
+* Cross-Bridge interleave is described in one CFMWS that covers all capacity.
+* One CFMWS is also described per-host bridge.
+* One CFMWS is also described per-device.
+* This SRAT describes one node for each of the above CFMWS.
+* The HMAT describes performance for each node in the SRAT.
+
+:doc:`CEDT <../acpi/cedt>`::
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000007
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010370400000
+          Register length : 0000000000010000
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000006
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010380800000
+          Register length : 0000000000010000
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000001000000000
+              Window size : 0000000400000000
+ Interleave Members (2^n) : 01
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+            Second Target : 00000006
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000002000000000
+              Window size : 0000000200000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000002200000000
+              Window size : 0000000200000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000006
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000003000000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000003100000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000003200000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000006
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000003300000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000006
+
+:doc:`SRAT <../acpi/srat>`::
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000001
+             Reserved1 : 0000
+          Base Address : 0000001000000000
+        Address Length : 0000000400000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000002
+             Reserved1 : 0000
+          Base Address : 0000002000000000
+        Address Length : 0000000200000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000003
+             Reserved1 : 0000
+          Base Address : 0000002200000000
+        Address Length : 0000000200000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000004
+             Reserved1 : 0000
+          Base Address : 0000003000000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000005
+             Reserved1 : 0000
+          Base Address : 0000003100000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000006
+             Reserved1 : 0000
+          Base Address : 0000003200000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000007
+             Reserved1 : 0000
+          Base Address : 0000003300000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+:doc:`HMAT <../acpi/hmat>`::
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 00   [Latency]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+ Target Proximity Domain List : 00000003
+ Target Proximity Domain List : 00000004
+ Target Proximity Domain List : 00000005
+ Target Proximity Domain List : 00000006
+ Target Proximity Domain List : 00000007
+                        Entry : 0080
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 03   [Bandwidth]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+ Target Proximity Domain List : 00000003
+ Target Proximity Domain List : 00000004
+ Target Proximity Domain List : 00000005
+ Target Proximity Domain List : 00000006
+ Target Proximity Domain List : 00000007
+                        Entry : 1200
+                        Entry : 0400
+                        Entry : 0200
+                        Entry : 0200
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+                        Entry : 0100
+
+:doc:`SLIT <../acpi/slit>`::
+
+     Signature : "SLIT"    [System Locality Information Table]
+    Localities : 0000000000000003
+  Locality   0 : 10 20 20 20 20 20 20 20
+  Locality   1 : FF 0A FF FF FF FF FF FF
+  Locality   2 : FF FF 0A FF FF FF FF FF
+  Locality   3 : FF FF FF 0A FF FF FF FF
+  Locality   4 : FF FF FF FF 0A FF FF FF
+  Locality   5 : FF FF FF FF FF 0A FF FF
+  Locality   6 : FF FF FF FF FF FF 0A FF
+  Locality   7 : FF FF FF FF FF FF FF 0A
+
+:doc:`DSDT <../acpi/dsdt>`::
+
+  Scope (_SB)
+  {
+    Device (S0D0)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x07)  // _UID: Unique ID
+    }
+    ...
+    Device (S0D5)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x06)  // _UID: Unique ID
+    }
+  }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/example-configurations/hb-interleave.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/hb-interleave.rst
new file mode 100644
index 000000000000..c474dcf09fb0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/hb-interleave.rst
@@ -0,0 +1,107 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Cross-Host-Bridge Interleave
+============================
+This system has a single socket with two CXL host bridges. Each host bridge
+has a single CXL memory expander with a 4GB of memory.
+
+Things to note:
+
+* Cross-Bridge interleave is described.
+* The expanders are described by a single CFMWS.
+* This SRAT describes one node for both host bridges.
+* The HMAT describes a single node's performance.
+
+:doc:`CEDT <../acpi/cedt>`::
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000007
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010370400000
+          Register length : 0000000000010000
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000006
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010380800000
+          Register length : 0000000000010000
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000001000000000
+              Window size : 0000000200000000
+ Interleave Members (2^n) : 01
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+            Second Target : 00000006
+
+:doc:`SRAT <../acpi/srat>`::
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000001
+             Reserved1 : 0000
+          Base Address : 0000001000000000
+        Address Length : 0000000200000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+:doc:`HMAT <../acpi/hmat>`::
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 00   [Latency]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+                        Entry : 0080
+                        Entry : 0100
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 03   [Bandwidth]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+                        Entry : 1200
+                        Entry : 0400
+
+:doc:`SLIT <../acpi/slit>`::
+
+     Signature : "SLIT"    [System Locality Information Table]
+    Localities : 0000000000000003
+  Locality   0 : 10 20
+  Locality   1 : FF 0A
+
+:doc:`DSDT <../acpi/dsdt>`::
+
+  Scope (_SB)
+  {
+    Device (S0D0)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x07)  // _UID: Unique ID
+    }
+    ...
+    Device (S0D5)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x06)  // _UID: Unique ID
+    }
+  }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/example-configurations/multi-dev-per-hb.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/multi-dev-per-hb.rst
new file mode 100644
index 000000000000..a7854a79dbbd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/multi-dev-per-hb.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+Multiple Devices per Host Bridge
+================================
+
+In this example system we will have a single socket and one CXL host bridge.
+There are two CXL memory expanders with 4GB attached to the host bridge.
+
+Things to note:
+
+* Intra-Bridge interleave is not described here.
+* The expanders are described by a single CEDT/CFMWS.
+* This CEDT/SRAT describes one node for both devices.
+* There is only one proximity domain the HMAT for both devices.
+
+:doc:`CEDT <../acpi/cedt>`::
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000007
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010370400000
+          Register length : 0000000000010000
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000001000000000
+              Window size : 0000000200000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+
+:doc:`SRAT <../acpi/srat>`::
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000001
+             Reserved1 : 0000
+          Base Address : 0000001000000000
+        Address Length : 0000000200000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+:doc:`HMAT <../acpi/hmat>`::
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 00   [Latency]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+                        Entry : 0080
+                        Entry : 0100
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 03   [Bandwidth]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+                        Entry : 1200
+                        Entry : 0200
+
+:doc:`SLIT <../acpi/slit>`::
+
+     Signature : "SLIT"    [System Locality Information Table]
+    Localities : 0000000000000003
+  Locality   0 : 10 20
+  Locality   1 : FF 0A
+
+:doc:`DSDT <../acpi/dsdt>`::
+
+  Scope (_SB)
+  {
+    Device (S0D0)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x07)  // _UID: Unique ID
+    }
+    ...
+  }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
new file mode 100644
index 000000000000..aebda0eb3e17
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
@@ -0,0 +1,136 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+One Device per Host Bridge
+==========================
+
+This system has a single socket with two CXL host bridges. Each host bridge
+has a single CXL memory expander with a 4GB of memory.
+
+Things to note:
+
+* Cross-Bridge interleave is not being used.
+* The expanders are in two separate but adjascent memory regions.
+* This CEDT/SRAT describes one node per device
+* The expanders have the same performance and will be in the same memory tier.
+
+:doc:`CEDT <../acpi/cedt>`::
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000007
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010370400000
+          Register length : 0000000000010000
+
+            Subtable Type : 00 [CXL Host Bridge Structure]
+                 Reserved : 00
+                   Length : 0020
+   Associated host bridge : 00000006
+    Specification version : 00000001
+                 Reserved : 00000000
+            Register base : 0000010380800000
+          Register length : 0000000000010000
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000001000000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000007
+
+            Subtable Type : 01 [CXL Fixed Memory Window Structure]
+                 Reserved : 00
+                   Length : 002C
+                 Reserved : 00000000
+      Window base address : 0000001100000000
+              Window size : 0000000100000000
+ Interleave Members (2^n) : 00
+    Interleave Arithmetic : 00
+                 Reserved : 0000
+              Granularity : 00000000
+             Restrictions : 0006
+                    QtgId : 0001
+             First Target : 00000006
+
+:doc:`SRAT <../acpi/srat>`::
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000001
+             Reserved1 : 0000
+          Base Address : 0000001000000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+         Subtable Type : 01 [Memory Affinity]
+                Length : 28
+      Proximity Domain : 00000002
+             Reserved1 : 0000
+          Base Address : 0000001100000000
+        Address Length : 0000000100000000
+             Reserved2 : 00000000
+ Flags (decoded below) : 0000000B
+             Enabled : 1
+       Hot Pluggable : 1
+        Non-Volatile : 0
+
+:doc:`HMAT <../acpi/hmat>`::
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 00   [Latency]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+                        Entry : 0080
+                        Entry : 0100
+                        Entry : 0100
+
+               Structure Type : 0001 [SLLBI]
+                    Data Type : 03   [Bandwidth]
+ Target Proximity Domain List : 00000000
+ Target Proximity Domain List : 00000001
+ Target Proximity Domain List : 00000002
+                        Entry : 1200
+                        Entry : 0200
+                        Entry : 0200
+
+:doc:`SLIT <../acpi/slit>`::
+
+     Signature : "SLIT"    [System Locality Information Table]
+    Localities : 0000000000000003
+  Locality   0 : 10 20 20
+  Locality   1 : FF 0A FF
+  Locality   2 : FF FF 0A
+
+:doc:`DSDT <../acpi/dsdt>`::
+
+  Scope (_SB)
+  {
+    Device (S0D0)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x07)  // _UID: Unique ID
+    }
+    ...
+    Device (S0D5)
+    {
+        Name (_HID, "ACPI0016" /* Compute Express Link Host Bridge */)  // _HID: Hardware ID
+        ...
+        Name (_UID, 0x06)  // _UID: Unique ID
+    }
+  }
diff --git linux-libre-6.15-gnu/Documentation/driver-api/cxl/memory-devices.rst linux-libre-6.16-gnu/Documentation/driver-api/cxl/theory-of-operation.rst
similarity index 95%
rename from Documentation/driver-api/cxl/memory-devices.rst
rename to Documentation/driver-api/cxl/theory-of-operation.rst
index d732c42526df..40793dad3630 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/cxl/memory-devices.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/cxl/theory-of-operation.rst
@@ -1,9 +1,9 @@
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-===================================
-Compute Express Link Memory Devices
-===================================
+===============================================
+Compute Express Link Driver Theory of Operation
+===============================================
 
 A Compute Express Link Memory Device is a CXL component that implements the
 CXL.mem protocol. It contains some amount of volatile memory, persistent memory,
@@ -14,8 +14,8 @@ that optionally define a device's contribution to an interleaved address
 range across multiple devices underneath a host-bridge or interleaved
 across host-bridges.
 
-CXL Bus: Theory of Operation
-============================
+The CXL Bus
+===========
 Similar to how a RAID driver takes disk objects and assembles them into a new
 logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and
 assemble them into a CXL.mem decode topology. The need for runtime configuration
@@ -347,6 +347,9 @@ CXL Core
 .. kernel-doc:: drivers/cxl/cxl.h
    :internal:
 
+.. kernel-doc:: drivers/cxl/acpi.c
+   :identifiers: add_cxl_resources
+
 .. kernel-doc:: drivers/cxl/core/hdm.c
    :doc: cxl core hdm
 
@@ -371,12 +374,26 @@ CXL Core
 .. kernel-doc:: drivers/cxl/core/pmem.c
    :doc: cxl pmem
 
+.. kernel-doc:: drivers/cxl/core/pmem.c
+   :identifiers:
+
 .. kernel-doc:: drivers/cxl/core/regs.c
    :doc: cxl registers
 
+.. kernel-doc:: drivers/cxl/core/regs.c
+   :identifiers:
+
 .. kernel-doc:: drivers/cxl/core/mbox.c
    :doc: cxl mbox
 
+.. kernel-doc:: drivers/cxl/core/mbox.c
+   :identifiers:
+
+.. kernel-doc:: drivers/cxl/core/features.c
+   :doc: cxl features
+
+See :c:func:`devm_cxl_setup_features` for API details.
+
 CXL Regions
 -----------
 .. kernel-doc:: drivers/cxl/core/region.c
diff --git linux-libre-6.15-gnu/Documentation/driver-api/dmaengine/provider.rst linux-libre-6.16-gnu/Documentation/driver-api/dmaengine/provider.rst
index 3085f8b460fa..1594598b3317 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/dmaengine/provider.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/dmaengine/provider.rst
@@ -172,8 +172,8 @@ Currently, the types available are:
   - It's usually used for copying pixel data between host memory and
     memory-mapped GPU device memory, such as found on modern PCI video graphics
     cards. The most immediate example is the OpenGL API function
-    ``glReadPielx()``, which might require a verbatim copy of a huge framebuffer
-    from local device memory onto host memory.
+    ``glReadPixels()``, which might require a verbatim copy of a huge
+    framebuffer from local device memory onto host memory.
 
 - DMA_XOR
 
@@ -217,10 +217,12 @@ Currently, the types available are:
 
 - DMA_ASYNC_TX
 
-  - Must not be set by the device, and will be set by the framework
-    if needed
+  - The device supports asynchronous memory-to-memory operations,
+    including memcpy, memset, xor, pq, xor_val, and pq_val.
 
-  - TODO: What is it about?
+  - This capability is automatically set by the DMA engine
+    framework and must not be configured manually by device
+    drivers.
 
 - DMA_SLAVE
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/driver-model/devres.rst linux-libre-6.16-gnu/Documentation/driver-api/driver-model/devres.rst
index d75728eb05f8..3d56f94ac2ee 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/driver-model/devres.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/driver-model/devres.rst
@@ -391,12 +391,11 @@ PCI
   devm_pci_remap_cfgspace()	: ioremap PCI configuration space
   devm_pci_remap_cfg_resource()	: ioremap PCI configuration space resource
 
-  pcim_enable_device()		: after success, some PCI ops become managed
+  pcim_enable_device()		: after success, the PCI device gets disabled automatically on driver detach
   pcim_iomap()			: do iomap() on a single BAR
   pcim_iomap_regions()		: do request_region() and iomap() on multiple BARs
   pcim_iomap_table()		: array of mapped addresses indexed by BAR
   pcim_iounmap()		: do iounmap() on a single BAR
-  pcim_iounmap_regions()	: do iounmap() and release_region() on multiple BARs
   pcim_pin_device()		: keep PCI device enabled after release
   pcim_set_mwi()		: enable Memory-Write-Invalidate PCI transaction
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/early-userspace/buffer-format.rst linux-libre-6.16-gnu/Documentation/driver-api/early-userspace/buffer-format.rst
index 7f74e301fdf3..726bfa2fe70d 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/early-userspace/buffer-format.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/early-userspace/buffer-format.rst
@@ -4,20 +4,18 @@ initramfs buffer format
 
 Al Viro, H. Peter Anvin
 
-Last revision: 2002-01-13
-
-Starting with kernel 2.5.x, the old "initial ramdisk" protocol is
-getting {replaced/complemented} with the new "initial ramfs"
-(initramfs) protocol.  The initramfs contents is passed using the same
-memory buffer protocol used by the initrd protocol, but the contents
+With kernel 2.5.x, the old "initial ramdisk" protocol was complemented
+with an "initial ramfs" protocol.  The initramfs content is passed
+using the same memory buffer protocol used by initrd, but the content
 is different.  The initramfs buffer contains an archive which is
-expanded into a ramfs filesystem; this document details the format of
-the initramfs buffer format.
+expanded into a ramfs filesystem; this document details the initramfs
+buffer format.
 
 The initramfs buffer format is based around the "newc" or "crc" CPIO
 formats, and can be created with the cpio(1) utility.  The cpio
-archive can be compressed using gzip(1).  One valid version of an
-initramfs buffer is thus a single .cpio.gz file.
+archive can be compressed using gzip(1), or any other algorithm provided
+via CONFIG_DECOMPRESS_*.  One valid version of an initramfs buffer is
+thus a single .cpio.gz file.
 
 The full format of the initramfs buffer is defined by the following
 grammar, where::
@@ -25,12 +23,20 @@ grammar, where::
 	*	is used to indicate "0 or more occurrences of"
 	(|)	indicates alternatives
 	+	indicates concatenation
-	GZIP()	indicates the gzip(1) of the operand
+	GZIP()	indicates gzip compression of the operand
+	BZIP2()	indicates bzip2 compression of the operand
+	LZMA()	indicates lzma compression of the operand
+	XZ()	indicates xz compression of the operand
+	LZO()	indicates lzo compression of the operand
+	LZ4()	indicates lz4 compression of the operand
+	ZSTD()	indicates zstd compression of the operand
 	ALGN(n)	means padding with null bytes to an n-byte boundary
 
-	initramfs  := ("\0" | cpio_archive | cpio_gzip_archive)*
+	initramfs := ("\0" | cpio_archive | cpio_compressed_archive)*
 
-	cpio_gzip_archive := GZIP(cpio_archive)
+	cpio_compressed_archive := (GZIP(cpio_archive) | BZIP2(cpio_archive)
+		| LZMA(cpio_archive) | XZ(cpio_archive) | LZO(cpio_archive)
+		| LZ4(cpio_archive) | ZSTD(cpio_archive))
 
 	cpio_archive := cpio_file* + (<nothing> | cpio_trailer)
 
@@ -75,6 +81,8 @@ c_chksum      8 bytes		 Checksum of data field if c_magic is 070702;
 The c_mode field matches the contents of st_mode returned by stat(2)
 on Linux, and encodes the file type and file permissions.
 
+c_mtime is ignored unless CONFIG_INITRAMFS_PRESERVE_MTIME=y is set.
+
 The c_filesize should be zero for any file which is not a regular file
 or symlink.
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/gpio/index.rst linux-libre-6.16-gnu/Documentation/driver-api/gpio/index.rst
index 34b57cee3391..43f6a3afe10b 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/gpio/index.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/gpio/index.rst
@@ -27,7 +27,7 @@ Core
 ACPI support
 ============
 
-.. kernel-doc:: drivers/gpio/gpiolib-acpi.c
+.. kernel-doc:: drivers/gpio/gpiolib-acpi-core.c
    :export:
 
 Device tree support
diff --git linux-libre-6.15-gnu/Documentation/driver-api/index.rst linux-libre-6.16-gnu/Documentation/driver-api/index.rst
index 16e2c4ec3c01..3e2a270bd828 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/index.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/index.rst
@@ -81,6 +81,7 @@ Subsystem-specific APIs
    acpi/index
    backlight/lp855x-driver.rst
    clk
+   coco/index
    console
    crypto/index
    dmaengine/index
diff --git linux-libre-6.15-gnu/Documentation/driver-api/ipmi.rst linux-libre-6.16-gnu/Documentation/driver-api/ipmi.rst
index dfa021eacd63..2cc6c898ab90 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/ipmi.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/ipmi.rst
@@ -45,7 +45,7 @@ manual), choose the 'IPMI SI handler' option.  A driver also exists
 for direct I2C access to the IPMI management controller.  Some boards
 support this, but it is unknown if it will work on every board.  For
 this, choose 'IPMI SMBus handler', but be ready to try to do some
-figuring to see if it will work on your system if the SMBIOS/APCI
+figuring to see if it will work on your system if the SMBIOS/ACPI
 information is wrong or not present.  It is fairly safe to have both
 these enabled and let the drivers auto-detect what is present.
 
@@ -63,7 +63,7 @@ situation, you need to read the section below named 'The SI Driver' or
 IPMI defines a standard watchdog timer.  You can enable this with the
 'IPMI Watchdog Timer' config option.  If you compile the driver into
 the kernel, then via a kernel command-line option you can have the
-watchdog timer start as soon as it initializes.  It also have a lot
+watchdog timer start as soon as it initializes.  It also has a lot
 of other options, see the 'Watchdog' section below for more details.
 Note that you can also have the watchdog continue to run if it is
 closed (by default it is disabled on close).  Go into the 'Watchdog
@@ -280,10 +280,8 @@ Creating the User
 To use the message handler, you must first create a user using
 ipmi_create_user.  The interface number specifies which SMI you want
 to connect to, and you must supply callback functions to be called
-when data comes in.  The callback function can run at interrupt level,
-so be careful using the callbacks.  This also allows to you pass in a
-piece of data, the handler_data, that will be passed back to you on
-all calls.
+when data comes in.  This also allows to you pass in a piece of data,
+the handler_data, that will be passed back to you on all calls.
 
 Once you are done, call ipmi_destroy_user() to get rid of the user.
 
@@ -303,8 +301,7 @@ use it for anything you like.
 
 Responses come back in the function pointed to by the ipmi_recv_hndl
 field of the "handler" that you passed in to ipmi_create_user().
-Remember again, these may be running at interrupt level.  Remember to
-look at the receive type, too.
+Remember to look at the receive type, too.
 
 From userland, you fill out an ipmi_req_t structure and use the
 IPMICTL_SEND_COMMAND ioctl.  For incoming stuff, you can use select()
@@ -317,13 +314,13 @@ This gives the receiver a place to actually put the message.
 
 If the message cannot fit into the data you provide, you will get an
 EMSGSIZE error and the driver will leave the data in the receive
-queue.  If you want to get it and have it truncate the message, us
+queue.  If you want to get it and have it truncate the message, use
 the IPMICTL_RECEIVE_MSG_TRUNC ioctl.
 
 When you send a command (which is defined by the lowest-order bit of
 the netfn per the IPMI spec) on the IPMB bus, the driver will
 automatically assign the sequence number to the command and save the
-command.  If the response is not receive in the IPMI-specified 5
+command.  If the response is not received in the IPMI-specified 5
 seconds, it will generate a response automatically saying the command
 timed out.  If an unsolicited response comes in (if it was after 5
 seconds, for instance), that response will be ignored.
@@ -367,7 +364,7 @@ channel bitmasks do not overlap.
 
 To respond to a received command, set the response bit in the returned
 netfn, use the address from the received message, and use the same
-msgid that you got in the receive message.
+msgid that you got in the received message.
 
 From userland, equivalent IOCTLs are provided to do these functions.
 
@@ -440,7 +437,7 @@ register would be 0xca6.  This defaults to 1.
 
 The regsizes parameter gives the size of a register, in bytes.  The
 data used by IPMI is 8-bits wide, but it may be inside a larger
-register.  This parameter allows the read and write type to specified.
+register.  This parameter allows the read and write type to be specified.
 It may be 1, 2, 4, or 8.  The default is 1.
 
 Since the register size may be larger than 32 bits, the IPMI data may not
@@ -481,8 +478,8 @@ If your IPMI interface does not support interrupts and is a KCS or
 SMIC interface, the IPMI driver will start a kernel thread for the
 interface to help speed things up.  This is a low-priority kernel
 thread that constantly polls the IPMI driver while an IPMI operation
-is in progress.  The force_kipmid module parameter will all the user to
-force this thread on or off.  If you force it off and don't have
+is in progress.  The force_kipmid module parameter will allow the user
+to force this thread on or off.  If you force it off and don't have
 interrupts, the driver will run VERY slowly.  Don't blame me,
 these interfaces suck.
 
@@ -583,7 +580,7 @@ kernel command line as::
 These are the same options as on the module command line.
 
 The I2C driver does not support non-blocking access or polling, so
-this driver cannod to IPMI panic events, extend the watchdog at panic
+this driver cannot do IPMI panic events, extend the watchdog at panic
 time, or other panic-related IPMI functions without special kernel
 patches and driver modifications.  You can get those at the openipmi
 web page.
@@ -610,7 +607,7 @@ Parameters are::
 	ipmi_ipmb.retry_time_ms=<Time between retries on IPMB>
 	ipmi_ipmb.max_retries=<Number of times to retry a message>
 
-Loading the module will not result in the driver automatcially
+Loading the module will not result in the driver automatically
 starting unless there is device tree information setting it up.  If
 you want to instantiate one of these by hand, do::
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/ntb.rst linux-libre-6.16-gnu/Documentation/driver-api/ntb.rst
index e991d92b8b1d..a49c41383779 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/ntb.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/ntb.rst
@@ -35,7 +35,7 @@ anyone who has written a pci driver.
 NTB Typical client driver implementation
 ----------------------------------------
 
-Primary purpose of NTB is to share some peace of memory between at least two
+Primary purpose of NTB is to share some piece of memory between at least two
 systems. So the NTB device features like Scratchpad/Message registers are
 mainly used to perform the proper memory window initialization. Typically
 there are two types of memory window interfaces supported by the NTB API:
diff --git linux-libre-6.15-gnu/Documentation/driver-api/nvmem.rst linux-libre-6.16-gnu/Documentation/driver-api/nvmem.rst
index 5d9500d21ecc..790e2dc652c0 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/nvmem.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/nvmem.rst
@@ -59,10 +59,10 @@ For example, a simple nvram case::
 	devm_nvmem_register(&config);
   }
 
-Users of board files can define and register nvmem cells using the
-nvmem_cell_table struct::
+Device drivers can define and register an nvmem cell using the nvmem_cell_info
+struct::
 
-  static struct nvmem_cell_info foo_nvmem_cells[] = {
+  static const struct nvmem_cell_info foo_nvmem_cell = {
 	{
 		.name		= "macaddr",
 		.offset		= 0x7f00,
@@ -70,13 +70,7 @@ nvmem_cell_table struct::
 	}
   };
 
-  static struct nvmem_cell_table foo_nvmem_cell_table = {
-	.nvmem_name		= "i2c-eeprom",
-	.cells			= foo_nvmem_cells,
-	.ncells			= ARRAY_SIZE(foo_nvmem_cells),
-  };
-
-  nvmem_add_cell_table(&foo_nvmem_cell_table);
+  int nvmem_add_one_cell(nvmem, &foo_nvmem_cell);
 
 Additionally it is possible to create nvmem cell lookup entries and register
 them with the nvmem framework from machine code as shown in the example below::
diff --git linux-libre-6.15-gnu/Documentation/driver-api/thermal/intel_dptf.rst linux-libre-6.16-gnu/Documentation/driver-api/thermal/intel_dptf.rst
index 8fb8c5b2d685..ec5769accae0 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/thermal/intel_dptf.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/thermal/intel_dptf.rst
@@ -191,6 +191,27 @@ ABI.
 	User space can specify any one of the available workload type using
 	this interface.
 
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/ptc_0_control`
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/ptc_1_control`
+:file:`/sys/bus/pci/devices/0000\:00\:04.0/ptc_2_control`
+
+All these controls needs admin privilege to update.
+
+``enable`` (RW)
+	1 for enable, 0 for disable. Shows the current enable status of
+	platform temperature control feature. User space can enable/disable
+	hardware controls.
+
+``temperature_target`` (RW)
+	Update a new temperature target in milli degree celsius for hardware to
+	use for the temperature control.
+
+Given that this is platform temperature control, it is expected that a
+single user-level manager owns and manages the controls. If multiple
+user-level software applications attempt to write different targets, it
+can lead to unexpected behavior.
+
+
 DPTF Processor thermal RFIM interface
 --------------------------------------------
 
diff --git linux-libre-6.15-gnu/Documentation/driver-api/usb/usb.rst linux-libre-6.16-gnu/Documentation/driver-api/usb/usb.rst
index 89f9c37bb979..976fb4221062 100644
--- linux-libre-6.15-gnu/Documentation/driver-api/usb/usb.rst
+++ linux-libre-6.16-gnu/Documentation/driver-api/usb/usb.rst
@@ -161,6 +161,7 @@ rely on 64bit DMA to eliminate another kind of bounce buffer.
 .. kernel-doc:: drivers/usb/core/urb.c
    :export:
 
+.. c:namespace:: usb_core
 .. kernel-doc:: drivers/usb/core/message.c
    :export:
 
diff --git linux-libre-6.15-gnu/Documentation/edac/memory_repair.rst linux-libre-6.16-gnu/Documentation/edac/memory_repair.rst
index 52162a422864..5f8da7c9b186 100644
--- linux-libre-6.15-gnu/Documentation/edac/memory_repair.rst
+++ linux-libre-6.16-gnu/Documentation/edac/memory_repair.rst
@@ -119,3 +119,34 @@ sysfs
 
 Sysfs files are documented in
 `Documentation/ABI/testing/sysfs-edac-memory-repair`.
+
+Examples
+--------
+
+The memory repair usage takes the form shown in this example:
+
+1. CXL memory sparing
+
+Memory sparing is defined as a repair function that replaces a portion of
+memory with a portion of functional memory at that same DPA. The subclass
+for this operation, cacheline/row/bank/rank sparing, vary in terms of the
+scope of the sparing being performed.
+
+Memory sparing maintenance operations may be supported by CXL devices that
+implement CXL.mem protocol. A sparing maintenance operation requests the
+CXL device to perform a repair operation on its media. For example, a CXL
+device with DRAM components that support memory sparing features may
+implement sparing maintenance operations.
+
+2. CXL memory Soft Post Package Repair (sPPR)
+
+Post Package Repair (PPR) maintenance operations may be supported by CXL
+devices that implement CXL.mem protocol. A PPR maintenance operation
+requests the CXL device to perform a repair operation on its media.
+For example, a CXL device with DRAM components that support PPR features
+may implement PPR Maintenance operations. Soft PPR (sPPR) is a temporary
+row repair. Soft PPR may be faster, but the repair is lost with a power
+cycle.
+
+Sysfs files for memory repair are documented in
+`Documentation/ABI/testing/sysfs-edac-memory-repair`
diff --git linux-libre-6.15-gnu/Documentation/edac/scrub.rst linux-libre-6.16-gnu/Documentation/edac/scrub.rst
index daab929cdba1..2cfa74fa1ffd 100644
--- linux-libre-6.15-gnu/Documentation/edac/scrub.rst
+++ linux-libre-6.16-gnu/Documentation/edac/scrub.rst
@@ -264,3 +264,79 @@ Sysfs files are documented in
 `Documentation/ABI/testing/sysfs-edac-scrub`
 
 `Documentation/ABI/testing/sysfs-edac-ecs`
+
+Examples
+--------
+
+The usage takes the form shown in these examples:
+
+1. CXL memory Patrol Scrub
+
+The following are the use cases identified why we might increase the scrub rate.
+
+- Scrubbing is needed at device granularity because a device is showing
+  unexpectedly high errors.
+
+- Scrubbing may apply to memory that isn't online at all yet. Likely this
+  is a system wide default setting on boot.
+
+- Scrubbing at a higher rate because the monitor software has determined that
+  more reliability is necessary for a particular data set. This is called
+  Differentiated Reliability.
+
+1.1. Device based scrubbing
+
+CXL memory is exposed to memory management subsystem and ultimately userspace
+via CXL devices. Device-based scrubbing is used for the first use case
+described in "Section 1 CXL Memory Patrol Scrub".
+
+When combining control via the device interfaces and region interfaces,
+"see Section 1.2 Region based scrubbing".
+
+Sysfs files for scrubbing are documented in
+`Documentation/ABI/testing/sysfs-edac-scrub`
+
+1.2. Region based scrubbing
+
+CXL memory is exposed to memory management subsystem and ultimately userspace
+via CXL regions. CXL Regions represent mapped memory capacity in system
+physical address space. These can incorporate one or more parts of multiple CXL
+memory devices with traffic interleaved across them. The user may want to control
+the scrub rate via this more abstract region instead of having to figure out the
+constituent devices and program them separately. The scrub rate for each device
+covers the whole device. Thus if multiple regions use parts of that device then
+requests for scrubbing of other regions may result in a higher scrub rate than
+requested for this specific region.
+
+Region-based scrubbing is used for the third use case described in
+"Section 1 CXL Memory Patrol Scrub".
+
+Userspace must follow below set of rules on how to set the scrub rates for any
+mixture of requirements.
+
+1. Taking each region in turn from lowest desired scrub rate to highest and set
+   their scrub rates. Later regions may override the scrub rate on individual
+   devices (and hence potentially whole regions).
+
+2. Take each device for which enhanced scrubbing is required (higher rate) and
+   set those scrub rates. This will override the scrub rates of individual devices,
+   setting them to the maximum rate required for any of the regions they help back,
+   unless a specific rate is already defined.
+
+Sysfs files for scrubbing are documented in
+`Documentation/ABI/testing/sysfs-edac-scrub`
+
+2. CXL memory Error Check Scrub (ECS)
+
+The Error Check Scrub (ECS) feature enables a memory device to perform error
+checking and correction (ECC) and count single-bit errors. The associated
+memory controller sets the ECS mode with a trigger sent to the memory
+device. CXL ECS control allows the host, thus the userspace, to change the
+attributes for error count mode, threshold number of errors per segment
+(indicating how many segments have at least that number of errors) for
+reporting errors, and reset the ECS counter. Thus the responsibility for
+initiating Error Check Scrub on a memory device may lie with the memory
+controller or platform when unexpectedly high error rates are detected.
+
+Sysfs files for scrubbing are documented in
+`Documentation/ABI/testing/sysfs-edac-ecs`
diff --git linux-libre-6.15-gnu/Documentation/fb/sstfb.rst linux-libre-6.16-gnu/Documentation/fb/sstfb.rst
index 88d5a52b13d8..7386eb63bac8 100644
--- linux-libre-6.15-gnu/Documentation/fb/sstfb.rst
+++ linux-libre-6.16-gnu/Documentation/fb/sstfb.rst
@@ -192,7 +192,7 @@ Todo
 - Get rid of the previous paragraph.
 - Buy more coffee.
 - test/port to other arch.
-- try to add panning using tweeks with front and back buffer .
+- try to add panning using tweaks with front and back buffer.
 - try to implement accel on voodoo2, this board can actually do a
   lot in 2D even if it was sold as a 3D only board ...
 
diff --git linux-libre-6.15-gnu/Documentation/features/core/mseal_sys_mappings/arch-support.txt linux-libre-6.16-gnu/Documentation/features/core/mseal_sys_mappings/arch-support.txt
index c6cab9760d57..a3c24233eb9b 100644
--- linux-libre-6.15-gnu/Documentation/features/core/mseal_sys_mappings/arch-support.txt
+++ linux-libre-6.16-gnu/Documentation/features/core/mseal_sys_mappings/arch-support.txt
@@ -12,7 +12,7 @@
     |       arm64: |  ok  |
     |        csky: |  N/A |
     |     hexagon: |  N/A |
-    |   loongarch: | TODO |
+    |   loongarch: |  ok  |
     |        m68k: |  N/A |
     |  microblaze: |  N/A |
     |        mips: | TODO |
diff --git linux-libre-6.15-gnu/Documentation/filesystems/bcachefs/casefolding.rst linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/casefolding.rst
index ba5de97d155f..871a38f557e8 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/bcachefs/casefolding.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/casefolding.rst
@@ -88,3 +88,21 @@ This would fail if negative dentry's were cached.
 
 This is slightly suboptimal, but could be fixed in future with some vfs work.
 
+
+References
+----------
+
+(from Peter Anvin, on the list)
+
+It is worth noting that Microsoft has basically declared their
+"recommended" case folding (upcase) table to be permanently frozen (for
+new filesystem instances in the case where they use an on-disk
+translation table created at format time.)  As far as I know they have
+never supported anything other than 1:1 conversion of BMP code points,
+nor normalization.
+
+The exFAT specification enumerates the full recommended upcase table,
+although in a somewhat annoying format (basically a hex dump of
+compressed data):
+
+https://learn.microsoft.com/en-us/windows/win32/fileio/exfat-specification
diff --git linux-libre-6.15-gnu/Documentation/filesystems/bcachefs/future/idle_work.rst linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/future/idle_work.rst
new file mode 100644
index 000000000000..59a332509dcd
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/future/idle_work.rst
@@ -0,0 +1,78 @@
+Idle/background work classes design doc:
+
+Right now, our behaviour at idle isn't ideal, it was designed for servers that
+would be under sustained load, to keep pending work at a "medium" level, to
+let work build up so we can process it in more efficient batches, while also
+giving headroom for bursts in load.
+
+But for desktops or mobile - scenarios where work is less sustained and power
+usage is more important - we want to operate differently, with a "rush to
+idle" so the system can go to sleep. We don't want to be dribbling out
+background work while the system should be idle.
+
+The complicating factor is that there are a number of background tasks, which
+form a heirarchy (or a digraph, depending on how you divide it up) - one
+background task may generate work for another.
+
+Thus proper idle detection needs to model this heirarchy.
+
+- Foreground writes
+- Page cache writeback
+- Copygc, rebalance
+- Journal reclaim
+
+When we implement idle detection and rush to idle, we need to be careful not
+to disturb too much the existing behaviour that works reasonably well when the
+system is under sustained load (or perhaps improve it in the case of
+rebalance, which currently does not actively attempt to let work batch up).
+
+SUSTAINED LOAD REGIME
+---------------------
+
+When the system is under continuous load, we want these jobs to run
+continuously - this is perhaps best modelled with a P/D controller, where
+they'll be trying to keep a target value (i.e. fragmented disk space,
+available journal space) roughly in the middle of some range.
+
+The goal under sustained load is to balance our ability to handle load spikes
+without running out of x resource (free disk space, free space in the
+journal), while also letting some work accumululate to be batched (or become
+unnecessary).
+
+For example, we don't want to run copygc too aggressively, because then it
+will be evacuating buckets that would have become empty (been overwritten or
+deleted) anyways, and we don't want to wait until we're almost out of free
+space because then the system will behave unpredicably - suddenly we're doing
+a lot more work to service each write and the system becomes much slower.
+
+IDLE REGIME
+-----------
+
+When the system becomes idle, we should start flushing our pending work
+quicker so the system can go to sleep.
+
+Note that the definition of "idle" depends on where in the heirarchy a task
+is - a task should start flushing work more quickly when the task above it has
+stopped generating new work.
+
+e.g. rebalance should start flushing more quickly when page cache writeback is
+idle, and journal reclaim should only start flushing more quickly when both
+copygc and rebalance are idle.
+
+It's important to let work accumulate when more work is still incoming and we
+still have room, because flushing is always more efficient if we let it batch
+up. New writes may overwrite data before rebalance moves it, and tasks may be
+generating more updates for the btree nodes that journal reclaim needs to flush.
+
+On idle, how much work we do at each interval should be proportional to the
+length of time we have been idle for. If we're idle only for a short duration,
+we shouldn't flush everything right away; the system might wake up and start
+generating new work soon, and flushing immediately might end up doing a lot of
+work that would have been unnecessary if we'd allowed things to batch more.
+ 
+To summarize, we will need:
+
+ - A list of classes for background tasks that generate work, which will
+   include one "foreground" class.
+ - Tracking for each class - "Am I doing work, or have I gone to sleep?"
+ - And each class should check the class above it when deciding how much work to issue.
diff --git linux-libre-6.15-gnu/Documentation/filesystems/bcachefs/index.rst linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/index.rst
index 3864d0ae89c1..e5c4c2120b93 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/bcachefs/index.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/bcachefs/index.rst
@@ -29,3 +29,10 @@ At this moment, only a few of these are described here.
 
    casefolding
    errorcodes
+
+Future design
+-------------
+.. toctree::
+   :maxdepth: 1
+
+   future/idle_work
diff --git linux-libre-6.15-gnu/Documentation/filesystems/debugfs.rst linux-libre-6.16-gnu/Documentation/filesystems/debugfs.rst
index 610f718ef8b5..55f807293924 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/debugfs.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/debugfs.rst
@@ -229,22 +229,15 @@ module is unloaded without explicitly removing debugfs entries, the result
 will be a lot of stale pointers and no end of highly antisocial behavior.
 So all debugfs users - at least those which can be built as modules - must
 be prepared to remove all files and directories they create there.  A file
-can be removed with::
+or directory can be removed with::
 
     void debugfs_remove(struct dentry *dentry);
 
 The dentry value can be NULL or an error value, in which case nothing will
-be removed.
-
-Once upon a time, debugfs users were required to remember the dentry
-pointer for every debugfs file they created so that all files could be
-cleaned up.  We live in more civilized times now, though, and debugfs users
-can call::
-
-    void debugfs_remove_recursive(struct dentry *dentry);
-
-If this function is passed a pointer for the dentry corresponding to the
-top-level directory, the entire hierarchy below that directory will be
-removed.
+be removed.  Note that this function will recursively remove all files and
+directories underneath it.  Previously, debugfs_remove_recursive() was used
+to perform that task, but this function is now just an alias to
+debugfs_remove().  debugfs_remove_recursive() should be considered
+deprecated.
 
 .. [1] http://lwn.net/Articles/309298/
diff --git linux-libre-6.15-gnu/Documentation/filesystems/erofs.rst linux-libre-6.16-gnu/Documentation/filesystems/erofs.rst
index c293f8e37468..7ddb235aee9d 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/erofs.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/erofs.rst
@@ -128,6 +128,7 @@ device=%s              Specify a path to an extra device to be used together.
 fsid=%s                Specify a filesystem image ID for Fscache back-end.
 domain_id=%s           Specify a domain ID in fscache mode so that different images
                        with the same blobs under a given domain ID can share storage.
+fsoffset=%llu          Specify block-aligned filesystem offset for the primary device.
 ===================    =========================================================
 
 Sysfs Entries
diff --git linux-libre-6.15-gnu/Documentation/filesystems/ext4/atomic_writes.rst linux-libre-6.16-gnu/Documentation/filesystems/ext4/atomic_writes.rst
new file mode 100644
index 000000000000..f65767df3620
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/filesystems/ext4/atomic_writes.rst
@@ -0,0 +1,225 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _atomic_writes:
+
+Atomic Block Writes
+-------------------------
+
+Introduction
+~~~~~~~~~~~~
+
+Atomic (untorn) block writes ensure that either the entire write is committed
+to disk or none of it is. This prevents "torn writes" during power loss or
+system crashes. The ext4 filesystem supports atomic writes (only with Direct
+I/O) on regular files with extents, provided the underlying storage device
+supports hardware atomic writes. This is supported in the following two ways:
+
+1. **Single-fsblock Atomic Writes**:
+   EXT4's supports atomic write operations with a single filesystem block since
+   v6.13. In this the atomic write unit minimum and maximum sizes are both set
+   to filesystem blocksize.
+   e.g. doing atomic write of 16KB with 16KB filesystem blocksize on 64KB
+   pagesize system is possible.
+
+2. **Multi-fsblock Atomic Writes with Bigalloc**:
+   EXT4 now also supports atomic writes spanning multiple filesystem blocks
+   using a feature known as bigalloc. The atomic write unit's minimum and
+   maximum sizes are determined by the filesystem block size and cluster size,
+   based on the underlying device’s supported atomic write unit limits.
+
+Requirements
+~~~~~~~~~~~~
+
+Basic requirements for atomic writes in ext4:
+
+ 1. The extents feature must be enabled (default for ext4)
+ 2. The underlying block device must support atomic writes
+ 3. For single-fsblock atomic writes:
+
+    1. A filesystem with appropriate block size (up to the page size)
+ 4. For multi-fsblock atomic writes:
+
+    1. The bigalloc feature must be enabled
+    2. The cluster size must be appropriately configured
+
+NOTE: EXT4 does not support software or COW based atomic write, which means
+atomic writes on ext4 are only supported if underlying storage device supports
+it.
+
+Multi-fsblock Implementation Details
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The bigalloc feature changes ext4 to allocate in units of multiple filesystem
+blocks, also known as clusters. With bigalloc each bit within block bitmap
+represents cluster (power of 2 number of blocks) rather than individual
+filesystem blocks.
+EXT4 supports multi-fsblock atomic writes with bigalloc, subject to the
+following constraints. The minimum atomic write size is the larger of the fs
+block size and the minimum hardware atomic write unit; and the maximum atomic
+write size is smaller of the bigalloc cluster size and the maximum hardware
+atomic write unit.  Bigalloc ensures that all allocations are aligned to the
+cluster size, which satisfies the LBA alignment requirements of the hardware
+device if the start of the partition/logical volume is itself aligned correctly.
+
+Here is the block allocation strategy in bigalloc for atomic writes:
+
+ * For regions with fully mapped extents, no additional work is needed
+ * For append writes, a new mapped extent is allocated
+ * For regions that are entirely holes, unwritten extent is created
+ * For large unwritten extents, the extent gets split into two unwritten
+   extents of appropriate requested size
+ * For mixed mapping regions (combinations of holes, unwritten extents, or
+   mapped extents), ext4_map_blocks() is called in a loop with
+   EXT4_GET_BLOCKS_ZERO flag to convert the region into a single contiguous
+   mapped extent by writing zeroes to it and converting any unwritten extents to
+   written, if found within the range.
+
+Note: Writing on a single contiguous underlying extent, whether mapped or
+unwritten, is not inherently problematic. However, writing to a mixed mapping
+region (i.e. one containing a combination of mapped and unwritten extents)
+must be avoided when performing atomic writes.
+
+The reason is that, atomic writes when issued via pwritev2() with the RWF_ATOMIC
+flag, requires that either all data is written or none at all. In the event of
+a system crash or unexpected power loss during the write operation, the affected
+region (when later read) must reflect either the complete old data or the
+complete new data, but never a mix of both.
+
+To enforce this guarantee, we ensure that the write target is backed by
+a single, contiguous extent before any data is written. This is critical because
+ext4 defers the conversion of unwritten extents to written extents until the I/O
+completion path (typically in ->end_io()). If a write is allowed to proceed over
+a mixed mapping region (with mapped and unwritten extents) and a failure occurs
+mid-write, the system could observe partially updated regions after reboot, i.e.
+new data over mapped areas, and stale (old) data over unwritten extents that
+were never marked written. This violates the atomicity and/or torn write
+prevention guarantee.
+
+To prevent such torn writes, ext4 proactively allocates a single contiguous
+extent for the entire requested region in ``ext4_iomap_alloc`` via
+``ext4_map_blocks_atomic()``. EXT4 also force commits the current journalling
+transaction in case if allocation is done over mixed mapping. This ensures any
+pending metadata updates (like unwritten to written extents conversion) in this
+range are in consistent state with the file data blocks, before performing the
+actual write I/O. If the commit fails, the whole I/O must be aborted to prevent
+from any possible torn writes.
+Only after this step, the actual data write operation is performed by the iomap.
+
+Handling Split Extents Across Leaf Blocks
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There can be a special edge case where we have logically and physically
+contiguous extents stored in separate leaf nodes of the on-disk extent tree.
+This occurs because on-disk extent tree merges only happens within the leaf
+blocks except for a case where we have 2-level tree which can get merged and
+collapsed entirely into the inode.
+If such a layout exists and, in the worst case, the extent status cache entries
+are reclaimed due to memory pressure, ``ext4_map_blocks()`` may never return
+a single contiguous extent for these split leaf extents.
+
+To address this edge case, a new get block flag
+``EXT4_GET_BLOCKS_QUERY_LEAF_BLOCKS flag`` is added to enhance the
+``ext4_map_query_blocks()`` lookup behavior.
+
+This new get block flag allows ``ext4_map_blocks()`` to first check if there is
+an entry in the extent status cache for the full range.
+If not present, it consults the on-disk extent tree using
+``ext4_map_query_blocks()``.
+If the located extent is at the end of a leaf node, it probes the next logical
+block (lblk) to detect a contiguous extent in the adjacent leaf.
+
+For now only one additional leaf block is queried to maintain efficiency, as
+atomic writes are typically constrained to small sizes
+(e.g. [blocksize, clustersize]).
+
+
+Handling Journal transactions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To support multi-fsblock atomic writes, we ensure enough journal credits are
+reserved during:
+
+ 1. Block allocation time in ``ext4_iomap_alloc()``. We first query if there
+    could be a mixed mapping for the underlying requested range. If yes, then we
+    reserve credits of up to ``m_len``, assuming every alternate block can be
+    an unwritten extent followed by a hole.
+
+ 2. During ``->end_io()`` call, we make sure a single transaction is started for
+    doing unwritten-to-written conversion. The loop for conversion is mainly
+    only required to handle a split extent across leaf blocks.
+
+How to
+------
+
+Creating Filesystems with Atomic Write Support
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+First check the atomic write units supported by block device.
+See :ref:`atomic_write_bdev_support` for more details.
+
+For single-fsblock atomic writes with a larger block size
+(on systems with block size < page size):
+
+.. code-block:: bash
+
+    # Create an ext4 filesystem with a 16KB block size
+    # (requires page size >= 16KB)
+    mkfs.ext4 -b 16384 /dev/device
+
+For multi-fsblock atomic writes with bigalloc:
+
+.. code-block:: bash
+
+    # Create an ext4 filesystem with bigalloc and 64KB cluster size
+    mkfs.ext4 -F -O bigalloc -b 4096 -C 65536 /dev/device
+
+Where ``-b`` specifies the block size, ``-C`` specifies the cluster size in bytes,
+and ``-O bigalloc`` enables the bigalloc feature.
+
+Application Interface
+~~~~~~~~~~~~~~~~~~~~~
+
+Applications can use the ``pwritev2()`` system call with the ``RWF_ATOMIC`` flag
+to perform atomic writes:
+
+.. code-block:: c
+
+    pwritev2(fd, iov, iovcnt, offset, RWF_ATOMIC);
+
+The write must be aligned to the filesystem's block size and not exceed the
+filesystem's maximum atomic write unit size.
+See ``generic_atomic_write_valid()`` for more details.
+
+``statx()`` system call with ``STATX_WRITE_ATOMIC`` flag can provides following
+details:
+
+ * ``stx_atomic_write_unit_min``: Minimum size of an atomic write request.
+ * ``stx_atomic_write_unit_max``: Maximum size of an atomic write request.
+ * ``stx_atomic_write_segments_max``: Upper limit for segments. The number of
+   separate memory buffers that can be gathered into a write operation
+   (e.g., the iovcnt parameter for IOV_ITER). Currently, this is always set to one.
+
+The STATX_ATTR_WRITE_ATOMIC flag in ``statx->attributes`` is set if atomic
+writes are supported.
+
+.. _atomic_write_bdev_support:
+
+Hardware Support
+----------------
+
+The underlying storage device must support atomic write operations.
+Modern NVMe and SCSI devices often provide this capability.
+The Linux kernel exposes this information through sysfs:
+
+* ``/sys/block/<device>/queue/atomic_write_unit_min`` - Minimum atomic write size
+* ``/sys/block/<device>/queue/atomic_write_unit_max`` - Maximum atomic write size
+
+Nonzero values for these attributes indicate that the device supports
+atomic writes.
+
+See Also
+--------
+
+* :doc:`bigalloc` - Documentation on the bigalloc feature
+* :doc:`allocators` - Documentation on block allocation in ext4
+* Support for atomic block writes in 6.13:
+  https://lwn.net/Articles/1009298/
diff --git linux-libre-6.15-gnu/Documentation/filesystems/ext4/overview.rst linux-libre-6.16-gnu/Documentation/filesystems/ext4/overview.rst
index 0fad6eda6e15..9d4054c17ecb 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/ext4/overview.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/ext4/overview.rst
@@ -25,3 +25,4 @@ order.
 .. include:: inlinedata.rst
 .. include:: eainode.rst
 .. include:: verity.rst
+.. include:: atomic_writes.rst
diff --git linux-libre-6.15-gnu/Documentation/filesystems/f2fs.rst linux-libre-6.16-gnu/Documentation/filesystems/f2fs.rst
index e15c4275862a..440e4ae74e44 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/f2fs.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/f2fs.rst
@@ -182,32 +182,34 @@ fault_type=%d		 Support configuring fault injection type, should be
 			 enabled with fault_injection option, fault type value
 			 is shown below, it supports single or combined type.
 
-			 ===========================      ===========
+			 ===========================      ==========
 			 Type_Name                        Type_Value
-			 ===========================      ===========
-			 FAULT_KMALLOC                    0x000000001
-			 FAULT_KVMALLOC                   0x000000002
-			 FAULT_PAGE_ALLOC                 0x000000004
-			 FAULT_PAGE_GET                   0x000000008
-			 FAULT_ALLOC_BIO                  0x000000010 (obsolete)
-			 FAULT_ALLOC_NID                  0x000000020
-			 FAULT_ORPHAN                     0x000000040
-			 FAULT_BLOCK                      0x000000080
-			 FAULT_DIR_DEPTH                  0x000000100
-			 FAULT_EVICT_INODE                0x000000200
-			 FAULT_TRUNCATE                   0x000000400
-			 FAULT_READ_IO                    0x000000800
-			 FAULT_CHECKPOINT                 0x000001000
-			 FAULT_DISCARD                    0x000002000
-			 FAULT_WRITE_IO                   0x000004000
-			 FAULT_SLAB_ALLOC                 0x000008000
-			 FAULT_DQUOT_INIT                 0x000010000
-			 FAULT_LOCK_OP                    0x000020000
-			 FAULT_BLKADDR_VALIDITY           0x000040000
-			 FAULT_BLKADDR_CONSISTENCE        0x000080000
-			 FAULT_NO_SEGMENT                 0x000100000
-			 FAULT_INCONSISTENT_FOOTER        0x000200000
-			 ===========================      ===========
+			 ===========================      ==========
+			 FAULT_KMALLOC                    0x00000001
+			 FAULT_KVMALLOC                   0x00000002
+			 FAULT_PAGE_ALLOC                 0x00000004
+			 FAULT_PAGE_GET                   0x00000008
+			 FAULT_ALLOC_BIO                  0x00000010 (obsolete)
+			 FAULT_ALLOC_NID                  0x00000020
+			 FAULT_ORPHAN                     0x00000040
+			 FAULT_BLOCK                      0x00000080
+			 FAULT_DIR_DEPTH                  0x00000100
+			 FAULT_EVICT_INODE                0x00000200
+			 FAULT_TRUNCATE                   0x00000400
+			 FAULT_READ_IO                    0x00000800
+			 FAULT_CHECKPOINT                 0x00001000
+			 FAULT_DISCARD                    0x00002000
+			 FAULT_WRITE_IO                   0x00004000
+			 FAULT_SLAB_ALLOC                 0x00008000
+			 FAULT_DQUOT_INIT                 0x00010000
+			 FAULT_LOCK_OP                    0x00020000
+			 FAULT_BLKADDR_VALIDITY           0x00040000
+			 FAULT_BLKADDR_CONSISTENCE        0x00080000
+			 FAULT_NO_SEGMENT                 0x00100000
+			 FAULT_INCONSISTENT_FOOTER        0x00200000
+			 FAULT_TIMEOUT                    0x00400000 (1000ms)
+			 FAULT_VMALLOC                    0x00800000
+			 ===========================      ==========
 mode=%s			 Control block allocation mode which supports "adaptive"
 			 and "lfs". In "lfs" mode, there should be no random
 			 writes towards main area.
diff --git linux-libre-6.15-gnu/Documentation/filesystems/fscrypt.rst linux-libre-6.16-gnu/Documentation/filesystems/fscrypt.rst
index e80329908549..29e84d125e02 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/fscrypt.rst
@@ -70,7 +70,7 @@ Online attacks
 --------------
 
 fscrypt (and storage encryption in general) can only provide limited
-protection, if any at all, against online attacks.  In detail:
+protection against online attacks.  In detail:
 
 Side-channel attacks
 ~~~~~~~~~~~~~~~~~~~~
@@ -99,16 +99,23 @@ Therefore, any encryption-specific access control checks would merely
 be enforced by kernel *code* and therefore would be largely redundant
 with the wide variety of access control mechanisms already available.)
 
-Kernel memory compromise
-~~~~~~~~~~~~~~~~~~~~~~~~
+Read-only kernel memory compromise
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Unless `hardware-wrapped keys`_ are used, an attacker who gains the
+ability to read from arbitrary kernel memory, e.g. by mounting a
+physical attack or by exploiting a kernel security vulnerability, can
+compromise all fscrypt keys that are currently in-use.  This also
+extends to cold boot attacks; if the system is suddenly powered off,
+keys the system was using may remain in memory for a short time.
 
-An attacker who compromises the system enough to read from arbitrary
-memory, e.g. by mounting a physical attack or by exploiting a kernel
-security vulnerability, can compromise all encryption keys that are
-currently in use.
+However, if hardware-wrapped keys are used, then the fscrypt master
+keys and file contents encryption keys (but not other types of fscrypt
+subkeys such as filenames encryption keys) are protected from
+compromises of arbitrary kernel memory.
 
-However, fscrypt allows encryption keys to be removed from the kernel,
-which may protect them from later compromise.
+In addition, fscrypt allows encryption keys to be removed from the
+kernel, which may protect them from later compromise.
 
 In more detail, the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (or the
 FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl) can wipe a master
@@ -144,6 +151,24 @@ However, these ioctls have some limitations:
   accelerator hardware (if used by the crypto API to implement any of
   the algorithms), or in other places not explicitly considered here.
 
+Full system compromise
+~~~~~~~~~~~~~~~~~~~~~~
+
+An attacker who gains "root" access and/or the ability to execute
+arbitrary kernel code can freely exfiltrate data that is protected by
+any in-use fscrypt keys.  Thus, usually fscrypt provides no meaningful
+protection in this scenario.  (Data that is protected by a key that is
+absent throughout the entire attack remains protected, modulo the
+limitations of key removal mentioned above in the case where the key
+was removed prior to the attack.)
+
+However, if `hardware-wrapped keys`_ are used, such attackers will be
+unable to exfiltrate the master keys or file contents keys in a form
+that will be usable after the system is powered off.  This may be
+useful if the attacker is significantly time-limited and/or
+bandwidth-limited, so they can only exfiltrate some data and need to
+rely on a later offline attack to exfiltrate the rest of it.
+
 Limitations of v1 policies
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -170,6 +195,10 @@ policies on all new encrypted directories.
 Key hierarchy
 =============
 
+Note: this section assumes the use of raw keys rather than
+hardware-wrapped keys.  The use of hardware-wrapped keys modifies the
+key hierarchy slightly.  For details, see `Hardware-wrapped keys`_.
+
 Master Keys
 -----------
 
@@ -832,7 +861,9 @@ a pointer to struct fscrypt_add_key_arg, defined as follows::
             struct fscrypt_key_specifier key_spec;
             __u32 raw_size;
             __u32 key_id;
-            __u32 __reserved[8];
+    #define FSCRYPT_ADD_KEY_FLAG_HW_WRAPPED 0x00000001
+            __u32 flags;
+            __u32 __reserved[7];
             __u8 raw[];
     };
 
@@ -851,7 +882,7 @@ a pointer to struct fscrypt_add_key_arg, defined as follows::
 
     struct fscrypt_provisioning_key_payload {
             __u32 type;
-            __u32 __reserved;
+            __u32 flags;
             __u8 raw[];
     };
 
@@ -879,24 +910,32 @@ as follows:
   Alternatively, if ``key_id`` is nonzero, this field must be 0, since
   in that case the size is implied by the specified Linux keyring key.
 
-- ``key_id`` is 0 if the raw key is given directly in the ``raw``
-  field.  Otherwise ``key_id`` is the ID of a Linux keyring key of
-  type "fscrypt-provisioning" whose payload is
-  struct fscrypt_provisioning_key_payload whose ``raw`` field contains
-  the raw key and whose ``type`` field matches ``key_spec.type``.
-  Since ``raw`` is variable-length, the total size of this key's
-  payload must be ``sizeof(struct fscrypt_provisioning_key_payload)``
-  plus the raw key size.  The process must have Search permission on
-  this key.
-
-  Most users should leave this 0 and specify the raw key directly.
-  The support for specifying a Linux keyring key is intended mainly to
+- ``key_id`` is 0 if the key is given directly in the ``raw`` field.
+  Otherwise ``key_id`` is the ID of a Linux keyring key of type
+  "fscrypt-provisioning" whose payload is struct
+  fscrypt_provisioning_key_payload whose ``raw`` field contains the
+  key, whose ``type`` field matches ``key_spec.type``, and whose
+  ``flags`` field matches ``flags``.  Since ``raw`` is
+  variable-length, the total size of this key's payload must be
+  ``sizeof(struct fscrypt_provisioning_key_payload)`` plus the number
+  of key bytes.  The process must have Search permission on this key.
+
+  Most users should leave this 0 and specify the key directly.  The
+  support for specifying a Linux keyring key is intended mainly to
   allow re-adding keys after a filesystem is unmounted and re-mounted,
-  without having to store the raw keys in userspace memory.
+  without having to store the keys in userspace memory.
+
+- ``flags`` contains optional flags from ``<linux/fscrypt.h>``:
+
+  - FSCRYPT_ADD_KEY_FLAG_HW_WRAPPED: This denotes that the key is a
+    hardware-wrapped key.  See `Hardware-wrapped keys`_.  This flag
+    can't be used if FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR is used.
 
 - ``raw`` is a variable-length field which must contain the actual
   key, ``raw_size`` bytes long.  Alternatively, if ``key_id`` is
-  nonzero, then this field is unused.
+  nonzero, then this field is unused.  Note that despite being named
+  ``raw``, if FSCRYPT_ADD_KEY_FLAG_HW_WRAPPED is specified then it
+  will contain a wrapped key, not a raw key.
 
 For v2 policy keys, the kernel keeps track of which user (identified
 by effective user ID) added the key, and only allows the key to be
@@ -908,8 +947,8 @@ prevent that other user from unexpectedly removing it.  Therefore,
 FS_IOC_ADD_ENCRYPTION_KEY may also be used to add a v2 policy key
 *again*, even if it's already added by other user(s).  In this case,
 FS_IOC_ADD_ENCRYPTION_KEY will just install a claim to the key for the
-current user, rather than actually add the key again (but the raw key
-must still be provided, as a proof of knowledge).
+current user, rather than actually add the key again (but the key must
+still be provided, as a proof of knowledge).
 
 FS_IOC_ADD_ENCRYPTION_KEY returns 0 if either the key or a claim to
 the key was either added or already exists.
@@ -918,20 +957,23 @@ FS_IOC_ADD_ENCRYPTION_KEY can fail with the following errors:
 
 - ``EACCES``: FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR was specified, but the
   caller does not have the CAP_SYS_ADMIN capability in the initial
-  user namespace; or the raw key was specified by Linux key ID but the
+  user namespace; or the key was specified by Linux key ID but the
   process lacks Search permission on the key.
+- ``EBADMSG``: invalid hardware-wrapped key
 - ``EDQUOT``: the key quota for this user would be exceeded by adding
   the key
 - ``EINVAL``: invalid key size or key specifier type, or reserved bits
   were set
-- ``EKEYREJECTED``: the raw key was specified by Linux key ID, but the
-  key has the wrong type
-- ``ENOKEY``: the raw key was specified by Linux key ID, but no key
-  exists with that ID
+- ``EKEYREJECTED``: the key was specified by Linux key ID, but the key
+  has the wrong type
+- ``ENOKEY``: the key was specified by Linux key ID, but no key exists
+  with that ID
 - ``ENOTTY``: this type of filesystem does not implement encryption
 - ``EOPNOTSUPP``: the kernel was not configured with encryption
   support for this filesystem, or the filesystem superblock has not
-  had encryption enabled on it
+  had encryption enabled on it; or a hardware wrapped key was specified
+  but the filesystem does not support inline encryption or the hardware
+  does not support hardware-wrapped keys
 
 Legacy method
 ~~~~~~~~~~~~~
@@ -994,9 +1036,8 @@ or removed by non-root users.
 These ioctls don't work on keys that were added via the legacy
 process-subscribed keyrings mechanism.
 
-Before using these ioctls, read the `Kernel memory compromise`_
-section for a discussion of the security goals and limitations of
-these ioctls.
+Before using these ioctls, read the `Online attacks`_ section for a
+discussion of the security goals and limitations of these ioctls.
 
 FS_IOC_REMOVE_ENCRYPTION_KEY
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -1316,7 +1357,8 @@ inline encryption hardware doesn't have the needed crypto capabilities
 (e.g. support for the needed encryption algorithm and data unit size)
 and where blk-crypto-fallback is unusable.  (For blk-crypto-fallback
 to be usable, it must be enabled in the kernel configuration with
-CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y.)
+CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y, and the file must be
+protected by a raw key rather than a hardware-wrapped key.)
 
 Currently fscrypt always uses the filesystem block size (which is
 usually 4096 bytes) as the data unit size.  Therefore, it can only use
@@ -1324,7 +1366,76 @@ inline encryption hardware that supports that data unit size.
 
 Inline encryption doesn't affect the ciphertext or other aspects of
 the on-disk format, so users may freely switch back and forth between
-using "inlinecrypt" and not using "inlinecrypt".
+using "inlinecrypt" and not using "inlinecrypt".  An exception is that
+files that are protected by a hardware-wrapped key can only be
+encrypted/decrypted by the inline encryption hardware and therefore
+can only be accessed when the "inlinecrypt" mount option is used.  For
+more information about hardware-wrapped keys, see below.
+
+Hardware-wrapped keys
+---------------------
+
+fscrypt supports using *hardware-wrapped keys* when the inline
+encryption hardware supports it.  Such keys are only present in kernel
+memory in wrapped (encrypted) form; they can only be unwrapped
+(decrypted) by the inline encryption hardware and are temporally bound
+to the current boot.  This prevents the keys from being compromised if
+kernel memory is leaked.  This is done without limiting the number of
+keys that can be used and while still allowing the execution of
+cryptographic tasks that are tied to the same key but can't use inline
+encryption hardware, e.g. filenames encryption.
+
+Note that hardware-wrapped keys aren't specific to fscrypt; they are a
+block layer feature (part of *blk-crypto*).  For more details about
+hardware-wrapped keys, see the block layer documentation at
+:ref:`Documentation/block/inline-encryption.rst
+<hardware_wrapped_keys>`.  The rest of this section just focuses on
+the details of how fscrypt can use hardware-wrapped keys.
+
+fscrypt supports hardware-wrapped keys by allowing the fscrypt master
+keys to be hardware-wrapped keys as an alternative to raw keys.  To
+add a hardware-wrapped key with `FS_IOC_ADD_ENCRYPTION_KEY`_,
+userspace must specify FSCRYPT_ADD_KEY_FLAG_HW_WRAPPED in the
+``flags`` field of struct fscrypt_add_key_arg and also in the
+``flags`` field of struct fscrypt_provisioning_key_payload when
+applicable.  The key must be in ephemerally-wrapped form, not
+long-term wrapped form.
+
+Some limitations apply.  First, files protected by a hardware-wrapped
+key are tied to the system's inline encryption hardware.  Therefore
+they can only be accessed when the "inlinecrypt" mount option is used,
+and they can't be included in portable filesystem images.  Second,
+currently the hardware-wrapped key support is only compatible with
+`IV_INO_LBLK_64 policies`_ and `IV_INO_LBLK_32 policies`_, as it
+assumes that there is just one file contents encryption key per
+fscrypt master key rather than one per file.  Future work may address
+this limitation by passing per-file nonces down the storage stack to
+allow the hardware to derive per-file keys.
+
+Implementation-wise, to encrypt/decrypt the contents of files that are
+protected by a hardware-wrapped key, fscrypt uses blk-crypto,
+attaching the hardware-wrapped key to the bio crypt contexts.  As is
+the case with raw keys, the block layer will program the key into a
+keyslot when it isn't already in one.  However, when programming a
+hardware-wrapped key, the hardware doesn't program the given key
+directly into a keyslot but rather unwraps it (using the hardware's
+ephemeral wrapping key) and derives the inline encryption key from it.
+The inline encryption key is the key that actually gets programmed
+into a keyslot, and it is never exposed to software.
+
+However, fscrypt doesn't just do file contents encryption; it also
+uses its master keys to derive filenames encryption keys, key
+identifiers, and sometimes some more obscure types of subkeys such as
+dirhash keys.  So even with file contents encryption out of the
+picture, fscrypt still needs a raw key to work with.  To get such a
+key from a hardware-wrapped key, fscrypt asks the inline encryption
+hardware to derive a cryptographically isolated "software secret" from
+the hardware-wrapped key.  fscrypt uses this "software secret" to key
+its KDF to derive all subkeys other than file contents keys.
+
+Note that this implies that the hardware-wrapped key feature only
+protects the file contents encryption keys.  It doesn't protect other
+fscrypt subkeys such as filenames encryption keys.
 
 Direct I/O support
 ==================
@@ -1409,7 +1520,7 @@ read the ciphertext into the page cache and decrypt it in-place.  The
 folio lock must be held until decryption has finished, to prevent the
 folio from becoming visible to userspace prematurely.
 
-For the write path (->writepage()) of regular files, filesystems
+For the write path (->writepages()) of regular files, filesystems
 cannot encrypt data in-place in the page cache, since the cached
 plaintext must be preserved.  Instead, filesystems must encrypt into a
 temporary buffer or "bounce page", then write out the temporary
diff --git linux-libre-6.15-gnu/Documentation/filesystems/fuse-passthrough.rst linux-libre-6.16-gnu/Documentation/filesystems/fuse-passthrough.rst
new file mode 100644
index 000000000000..2b0e7c2da54a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/filesystems/fuse-passthrough.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+FUSE Passthrough
+================
+
+Introduction
+============
+
+FUSE (Filesystem in Userspace) passthrough is a feature designed to improve the
+performance of FUSE filesystems for I/O operations. Typically, FUSE operations
+involve communication between the kernel and a userspace FUSE daemon, which can
+incur overhead. Passthrough allows certain operations on a FUSE file to bypass
+the userspace daemon and be executed directly by the kernel on an underlying
+"backing file".
+
+This is achieved by the FUSE daemon registering a file descriptor (pointing to
+the backing file on a lower filesystem) with the FUSE kernel module. The kernel
+then receives an identifier (``backing_id``) for this registered backing file.
+When a FUSE file is subsequently opened, the FUSE daemon can, in its response to
+the ``OPEN`` request, include this ``backing_id`` and set the
+``FOPEN_PASSTHROUGH`` flag. This establishes a direct link for specific
+operations.
+
+Currently, passthrough is supported for operations like ``read(2)``/``write(2)``
+(via ``read_iter``/``write_iter``), ``splice(2)``, and ``mmap(2)``.
+
+Enabling Passthrough
+====================
+
+To use FUSE passthrough:
+
+  1. The FUSE filesystem must be compiled with ``CONFIG_FUSE_PASSTHROUGH``
+     enabled.
+  2. The FUSE daemon, during the ``FUSE_INIT`` handshake, must negotiate the
+     ``FUSE_PASSTHROUGH`` capability and specify its desired
+     ``max_stack_depth``.
+  3. The (privileged) FUSE daemon uses the ``FUSE_DEV_IOC_BACKING_OPEN`` ioctl
+     on its connection file descriptor (e.g., ``/dev/fuse``) to register a
+     backing file descriptor and obtain a ``backing_id``.
+  4. When handling an ``OPEN`` or ``CREATE`` request for a FUSE file, the daemon
+     replies with the ``FOPEN_PASSTHROUGH`` flag set in
+     ``fuse_open_out::open_flags`` and provides the corresponding ``backing_id``
+     in ``fuse_open_out::backing_id``.
+  5. The FUSE daemon should eventually call ``FUSE_DEV_IOC_BACKING_CLOSE`` with
+     the ``backing_id`` to release the kernel's reference to the backing file
+     when it's no longer needed for passthrough setups.
+
+Privilege Requirements
+======================
+
+Setting up passthrough functionality currently requires the FUSE daemon to
+possess the ``CAP_SYS_ADMIN`` capability. This requirement stems from several
+security and resource management considerations that are actively being
+discussed and worked on. The primary reasons for this restriction are detailed
+below.
+
+Resource Accounting and Visibility
+----------------------------------
+
+The core mechanism for passthrough involves the FUSE daemon opening a file
+descriptor to a backing file and registering it with the FUSE kernel module via
+the ``FUSE_DEV_IOC_BACKING_OPEN`` ioctl. This ioctl returns a ``backing_id``
+associated with a kernel-internal ``struct fuse_backing`` object, which holds a
+reference to the backing ``struct file``.
+
+A significant concern arises because the FUSE daemon can close its own file
+descriptor to the backing file after registration. The kernel, however, will
+still hold a reference to the ``struct file`` via the ``struct fuse_backing``
+object as long as it's associated with a ``backing_id`` (or subsequently, with
+an open FUSE file in passthrough mode).
+
+This behavior leads to two main issues for unprivileged FUSE daemons:
+
+  1. **Invisibility to lsof and other inspection tools**: Once the FUSE
+     daemon closes its file descriptor, the open backing file held by the kernel
+     becomes "hidden." Standard tools like ``lsof``, which typically inspect
+     process file descriptor tables, would not be able to identify that this
+     file is still open by the system on behalf of the FUSE filesystem. This
+     makes it difficult for system administrators to track resource usage or
+     debug issues related to open files (e.g., preventing unmounts).
+
+  2. **Bypassing RLIMIT_NOFILE**: The FUSE daemon process is subject to
+     resource limits, including the maximum number of open file descriptors
+     (``RLIMIT_NOFILE``). If an unprivileged daemon could register backing files
+     and then close its own FDs, it could potentially cause the kernel to hold
+     an unlimited number of open ``struct file`` references without these being
+     accounted against the daemon's ``RLIMIT_NOFILE``. This could lead to a
+     denial-of-service (DoS) by exhausting system-wide file resources.
+
+The ``CAP_SYS_ADMIN`` requirement acts as a safeguard against these issues,
+restricting this powerful capability to trusted processes.
+
+**NOTE**: ``io_uring`` solves this similar issue by exposing its "fixed files",
+which are visible via ``fdinfo`` and accounted under the registering user's
+``RLIMIT_NOFILE``.
+
+Filesystem Stacking and Shutdown Loops
+--------------------------------------
+
+Another concern relates to the potential for creating complex and problematic
+filesystem stacking scenarios if unprivileged users could set up passthrough.
+A FUSE passthrough filesystem might use a backing file that resides:
+
+  * On the *same* FUSE filesystem.
+  * On another filesystem (like OverlayFS) which itself might have an upper or
+    lower layer that is a FUSE filesystem.
+
+These configurations could create dependency loops, particularly during
+filesystem shutdown or unmount sequences, leading to deadlocks or system
+instability. This is conceptually similar to the risks associated with the
+``LOOP_SET_FD`` ioctl, which also requires ``CAP_SYS_ADMIN``.
+
+To mitigate this, FUSE passthrough already incorporates checks based on
+filesystem stacking depth (``sb->s_stack_depth`` and ``fc->max_stack_depth``).
+For example, during the ``FUSE_INIT`` handshake, the FUSE daemon can negotiate
+the ``max_stack_depth`` it supports. When a backing file is registered via
+``FUSE_DEV_IOC_BACKING_OPEN``, the kernel checks if the backing file's
+filesystem stack depth is within the allowed limit.
+
+The ``CAP_SYS_ADMIN`` requirement provides an additional layer of security,
+ensuring that only privileged users can create these potentially complex
+stacking arrangements.
+
+General Security Posture
+------------------------
+
+As a general principle for new kernel features that allow userspace to instruct
+the kernel to perform direct operations on its behalf based on user-provided
+file descriptors, starting with a higher privilege requirement (like
+``CAP_SYS_ADMIN``) is a conservative and common security practice. This allows
+the feature to be used and tested while further security implications are
+evaluated and addressed.
diff --git linux-libre-6.15-gnu/Documentation/filesystems/index.rst linux-libre-6.16-gnu/Documentation/filesystems/index.rst
index a9cf8e950b15..11a599387266 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/index.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/index.rst
@@ -99,6 +99,7 @@ Documentation for filesystem implementations.
    fuse
    fuse-io
    fuse-io-uring
+   fuse-passthrough
    inotify
    isofs
    nilfs2
@@ -113,6 +114,7 @@ Documentation for filesystem implementations.
    qnx6
    ramfs-rootfs-initramfs
    relay
+   resctrl
    romfs
    smb/index
    spufs/index
diff --git linux-libre-6.15-gnu/Documentation/filesystems/iomap/design.rst linux-libre-6.16-gnu/Documentation/filesystems/iomap/design.rst
index e29651a42eec..f2df9b6df988 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/iomap/design.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/iomap/design.rst
@@ -243,13 +243,25 @@ The fields are as follows:
      regular file data.
      This is only useful for FIEMAP.
 
-   * **IOMAP_F_PRIVATE**: Starting with this value, the upper bits can
-     be set by the filesystem for its own purposes.
+   * **IOMAP_F_BOUNDARY**: This indicates I/O and its completion must not be
+     merged with any other I/O or completion. Filesystems must use this when
+     submitting I/O to devices that cannot handle I/O crossing certain LBAs
+     (e.g. ZNS devices). This flag applies only to buffered I/O writeback; all
+     other functions ignore it.
+
+   * **IOMAP_F_PRIVATE**: This flag is reserved for filesystem private use.
 
    * **IOMAP_F_ANON_WRITE**: Indicates that (write) I/O does not have a target
      block assigned to it yet and the file system will do that in the bio
      submission handler, splitting the I/O as needed.
 
+   * **IOMAP_F_ATOMIC_BIO**: This indicates write I/O must be submitted with the
+     ``REQ_ATOMIC`` flag set in the bio. Filesystems need to set this flag to
+     inform iomap that the write I/O operation requires torn-write protection
+     based on HW-offload mechanism. They must also ensure that mapping updates
+     upon the completion of the I/O must be performed in a single metadata
+     update.
+
    These flags can be set by iomap itself during file operations.
    The filesystem should supply an ``->iomap_end`` function if it needs
    to observe these flags:
diff --git linux-libre-6.15-gnu/Documentation/filesystems/locking.rst linux-libre-6.16-gnu/Documentation/filesystems/locking.rst
index 0ec0bb6eb0fb..2e567e341c3b 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/locking.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/locking.rst
@@ -249,7 +249,6 @@ address_space_operations
 ========================
 prototypes::
 
-	int (*writepage)(struct page *page, struct writeback_control *wbc);
 	int (*read_folio)(struct file *, struct folio *);
 	int (*writepages)(struct address_space *, struct writeback_control *);
 	bool (*dirty_folio)(struct address_space *, struct folio *folio);
@@ -280,7 +279,6 @@ locking rules:
 ======================	======================== =========	===============
 ops			folio locked		 i_rwsem	invalidate_lock
 ======================	======================== =========	===============
-writepage:		yes, unlocks (see below)
 read_folio:		yes, unlocks				shared
 writepages:
 dirty_folio:		maybe
@@ -309,54 +307,6 @@ completion.
 
 ->readahead() unlocks the folios that I/O is attempted on like ->read_folio().
 
-->writepage() is used for two purposes: for "memory cleansing" and for
-"sync".  These are quite different operations and the behaviour may differ
-depending upon the mode.
-
-If writepage is called for sync (wbc->sync_mode != WBC_SYNC_NONE) then
-it *must* start I/O against the page, even if that would involve
-blocking on in-progress I/O.
-
-If writepage is called for memory cleansing (sync_mode ==
-WBC_SYNC_NONE) then its role is to get as much writeout underway as
-possible.  So writepage should try to avoid blocking against
-currently-in-progress I/O.
-
-If the filesystem is not called for "sync" and it determines that it
-would need to block against in-progress I/O to be able to start new I/O
-against the page the filesystem should redirty the page with
-redirty_page_for_writepage(), then unlock the page and return zero.
-This may also be done to avoid internal deadlocks, but rarely.
-
-If the filesystem is called for sync then it must wait on any
-in-progress I/O and then start new I/O.
-
-The filesystem should unlock the page synchronously, before returning to the
-caller, unless ->writepage() returns special WRITEPAGE_ACTIVATE
-value. WRITEPAGE_ACTIVATE means that page cannot really be written out
-currently, and VM should stop calling ->writepage() on this page for some
-time. VM does this by moving page to the head of the active list, hence the
-name.
-
-Unless the filesystem is going to redirty_page_for_writepage(), unlock the page
-and return zero, writepage *must* run set_page_writeback() against the page,
-followed by unlocking it.  Once set_page_writeback() has been run against the
-page, write I/O can be submitted and the write I/O completion handler must run
-end_page_writeback() once the I/O is complete.  If no I/O is submitted, the
-filesystem must run end_page_writeback() against the page before returning from
-writepage.
-
-That is: after 2.5.12, pages which are under writeout are *not* locked.  Note,
-if the filesystem needs the page to be locked during writeout, that is ok, too,
-the page is allowed to be unlocked at any point in time between the calls to
-set_page_writeback() and end_page_writeback().
-
-Note, failure to run either redirty_page_for_writepage() or the combination of
-set_page_writeback()/end_page_writeback() on a page submitted to writepage
-will leave the page itself marked clean but it will be tagged as dirty in the
-radix tree.  This incoherency can lead to all sorts of hard-to-debug problems
-in the filesystem like having dirty inodes at umount and losing written data.
-
 ->writepages() is used for periodic writeback and for syscall-initiated
 sync operations.  The address_space should start I/O against at least
 ``*nr_to_write`` pages.  ``*nr_to_write`` must be decremented for each page
@@ -364,8 +314,8 @@ which is written.  The address_space implementation may write more (or less)
 pages than ``*nr_to_write`` asks for, but it should try to be reasonably close.
 If nr_to_write is NULL, all dirty pages must be written.
 
-writepages should _only_ write pages which are present on
-mapping->io_pages.
+writepages should _only_ write pages which are present in
+mapping->i_pages.
 
 ->dirty_folio() is called from various places in the kernel when
 the target folio is marked as needing writeback.  The folio cannot be
diff --git linux-libre-6.15-gnu/Documentation/filesystems/mount_api.rst linux-libre-6.16-gnu/Documentation/filesystems/mount_api.rst
index d92c276f1575..e149b89118c8 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/mount_api.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/mount_api.rst
@@ -671,7 +671,6 @@ The members are as follows:
 	fsparam_bool()		fs_param_is_bool
 	fsparam_u32()		fs_param_is_u32
 	fsparam_u32oct()	fs_param_is_u32_octal
-	fsparam_u32hex()	fs_param_is_u32_hex
 	fsparam_s32()		fs_param_is_s32
 	fsparam_u64()		fs_param_is_u64
 	fsparam_enum()		fs_param_is_enum
@@ -753,21 +752,6 @@ process the parameters it is given.
      If a match is found, the corresponding value is returned.  If a match
      isn't found, the not_found value is returned instead.
 
-   * ::
-
-       bool validate_constant_table(const struct constant_table *tbl,
-				    size_t tbl_size,
-				    int low, int high, int special);
-
-     Validate a constant table.  Checks that all the elements are appropriately
-     ordered, that there are no duplicates and that the values are between low
-     and high inclusive, though provision is made for one allowable special
-     value outside of that range.  If no special value is required, special
-     should just be set to lie inside the low-to-high range.
-
-     If all is good, true is returned.  If the table is invalid, errors are
-     logged to the kernel log buffer and false is returned.
-
    * ::
 
        bool fs_validate_description(const char *name,
diff --git linux-libre-6.15-gnu/Documentation/filesystems/netfs_library.rst linux-libre-6.16-gnu/Documentation/filesystems/netfs_library.rst
index 3886c14f89f4..ddd799df6ce3 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/netfs_library.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/netfs_library.rst
@@ -1,33 +1,187 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=================================
-Network Filesystem Helper Library
-=================================
+===================================
+Network Filesystem Services Library
+===================================
 
 .. Contents:
 
  - Overview.
+   - Requests and streams.
+   - Subrequests.
+   - Result collection and retry.
+   - Local caching.
+   - Content encryption (fscrypt).
  - Per-inode context.
    - Inode context helper functions.
- - Buffered read helpers.
-   - Read helper functions.
-   - Read helper structures.
-   - Read helper operations.
-   - Read helper procedure.
-   - Read helper cache API.
+   - Inode locking.
+   - Inode writeback.
+ - High-level VFS API.
+   - Unlocked read/write iter.
+   - Pre-locked read/write iter.
+   - Monolithic files API.
+   - Memory-mapped I/O API.
+ - High-level VM API.
+   - Deprecated PG_private2 API.
+ - I/O request API.
+   - Request structure.
+   - Stream structure.
+   - Subrequest structure.
+   - Filesystem methods.
+   - Terminating a subrequest.
+   - Local cache API.
+ - API function reference.
 
 
 Overview
 ========
 
-The network filesystem helper library is a set of functions designed to aid a
-network filesystem in implementing VM/VFS operations.  For the moment, that
-just includes turning various VM buffered read operations into requests to read
-from the server.  The helper library, however, can also interpose other
-services, such as local caching or local data encryption.
+The network filesystem services library, netfslib, is a set of functions
+designed to aid a network filesystem in implementing VM/VFS API operations.  It
+takes over the normal buffered read, readahead, write and writeback and also
+handles unbuffered and direct I/O.
 
-Note that the library module doesn't link against local caching directly, so
-access must be provided by the netfs.
+The library provides support for (re-)negotiation of I/O sizes and retrying
+failed I/O as well as local caching and will, in the future, provide content
+encryption.
+
+It insulates the filesystem from VM interface changes as much as possible and
+handles VM features such as large multipage folios.  The filesystem basically
+just has to provide a way to perform read and write RPC calls.
+
+The way I/O is organised inside netfslib consists of a number of objects:
+
+ * A *request*.  A request is used to track the progress of the I/O overall and
+   to hold on to resources.  The collection of results is done at the request
+   level.  The I/O within a request is divided into a number of parallel
+   streams of subrequests.
+
+ * A *stream*.  A non-overlapping series of subrequests.  The subrequests
+   within a stream do not have to be contiguous.
+
+ * A *subrequest*.  This is the basic unit of I/O.  It represents a single RPC
+   call or a single cache I/O operation.  The library passes these to the
+   filesystem and the cache to perform.
+
+Requests and Streams
+--------------------
+
+When actually performing I/O (as opposed to just copying into the pagecache),
+netfslib will create one or more requests to track the progress of the I/O and
+to hold resources.
+
+A read operation will have a single stream and the subrequests within that
+stream may be of mixed origins, for instance mixing RPC subrequests and cache
+subrequests.
+
+On the other hand, a write operation may have multiple streams, where each
+stream targets a different destination.  For instance, there may be one stream
+writing to the local cache and one to the server.  Currently, only two streams
+are allowed, but this could be increased if parallel writes to multiple servers
+is desired.
+
+The subrequests within a write stream do not need to match alignment or size
+with the subrequests in another write stream and netfslib performs the tiling
+of subrequests in each stream over the source buffer independently.  Further,
+each stream may contain holes that don't correspond to holes in the other
+stream.
+
+In addition, the subrequests do not need to correspond to the boundaries of the
+folios or vectors in the source/destination buffer.  The library handles the
+collection of results and the wrangling of folio flags and references.
+
+Subrequests
+-----------
+
+Subrequests are at the heart of the interaction between netfslib and the
+filesystem using it.  Each subrequest is expected to correspond to a single
+read or write RPC or cache operation.  The library will stitch together the
+results from a set of subrequests to provide a higher level operation.
+
+Netfslib has two interactions with the filesystem or the cache when setting up
+a subrequest.  First, there's an optional preparatory step that allows the
+filesystem to negotiate the limits on the subrequest, both in terms of maximum
+number of bytes and maximum number of vectors (e.g. for RDMA).  This may
+involve negotiating with the server (e.g. cifs needing to acquire credits).
+
+And, secondly, there's the issuing step in which the subrequest is handed off
+to the filesystem to perform.
+
+Note that these two steps are done slightly differently between read and write:
+
+ * For reads, the VM/VFS tells us how much is being requested up front, so the
+   library can preset maximum values that the cache and then the filesystem can
+   then reduce.  The cache also gets consulted first on whether it wants to do
+   a read before the filesystem is consulted.
+
+ * For writeback, it is unknown how much there will be to write until the
+   pagecache is walked, so no limit is set by the library.
+
+Once a subrequest is completed, the filesystem or cache informs the library of
+the completion and then collection is invoked.  Depending on whether the
+request is synchronous or asynchronous, the collection of results will be done
+in either the application thread or in a work queue.
+
+Result Collection and Retry
+---------------------------
+
+As subrequests complete, the results are collected and collated by the library
+and folio unlocking is performed progressively (if appropriate).  Once the
+request is complete, async completion will be invoked (again, if appropriate).
+It is possible for the filesystem to provide interim progress reports to the
+library to cause folio unlocking to happen earlier if possible.
+
+If any subrequests fail, netfslib can retry them.  It will wait until all
+subrequests are completed, offer the filesystem the opportunity to fiddle with
+the resources/state held by the request and poke at the subrequests before
+re-preparing and re-issuing the subrequests.
+
+This allows the tiling of contiguous sets of failed subrequest within a stream
+to be changed, adding more subrequests or ditching excess as necessary (for
+instance, if the network sizes change or the server decides it wants smaller
+chunks).
+
+Further, if one or more contiguous cache-read subrequests fail, the library
+will pass them to the filesystem to perform instead, renegotiating and retiling
+them as necessary to fit with the filesystem's parameters rather than those of
+the cache.
+
+Local Caching
+-------------
+
+One of the services netfslib provides, via ``fscache``, is the option to cache
+on local disk a copy of the data obtained from/written to a network filesystem.
+The library will manage the storing, retrieval and some invalidation of data
+automatically on behalf of the filesystem if a cookie is attached to the
+``netfs_inode``.
+
+Note that local caching used to use the PG_private_2 (aliased as PG_fscache) to
+keep track of a page that was being written to the cache, but this is now
+deprecated as PG_private_2 will be removed.
+
+Instead, folios that are read from the server for which there was no data in
+the cache will be marked as dirty and will have ``folio->private`` set to a
+special value (``NETFS_FOLIO_COPY_TO_CACHE``) and left to writeback to write.
+If the folio is modified before that happened, the special value will be
+cleared and the write will become normally dirty.
+
+When writeback occurs, folios that are so marked will only be written to the
+cache and not to the server.  Writeback handles mixed cache-only writes and
+server-and-cache writes by using two streams, sending one to the cache and one
+to the server.  The server stream will have gaps in it corresponding to those
+folios.
+
+Content Encryption (fscrypt)
+----------------------------
+
+Though it does not do so yet, at some point netfslib will acquire the ability
+to do client-side content encryption on behalf of the network filesystem (Ceph,
+for example).  fscrypt can be used for this if appropriate (it may not be -
+cifs, for example).
+
+The data will be stored encrypted in the local cache using the same manner of
+encryption as the data written to the server and the library will impose bounce
+buffering and RMW cycles as necessary.
 
 
 Per-Inode Context
@@ -40,10 +194,13 @@ structure is defined::
 	struct netfs_inode {
 		struct inode inode;
 		const struct netfs_request_ops *ops;
-		struct fscache_cookie *cache;
+		struct fscache_cookie * cache;
+		loff_t remote_i_size;
+		unsigned long flags;
+		...
 	};
 
-A network filesystem that wants to use netfs lib must place one of these in its
+A network filesystem that wants to use netfslib must place one of these in its
 inode wrapper struct instead of the VFS ``struct inode``.  This can be done in
 a way similar to the following::
 
@@ -56,7 +213,8 @@ This allows netfslib to find its state by using ``container_of()`` from the
 inode pointer, thereby allowing the netfslib helper functions to be pointed to
 directly by the VFS/VM operation tables.
 
-The structure contains the following fields:
+The structure contains the following fields that are of interest to the
+filesystem:
 
  * ``inode``
 
@@ -71,6 +229,37 @@ The structure contains the following fields:
    Local caching cookie, or NULL if no caching is enabled.  This field does not
    exist if fscache is disabled.
 
+ * ``remote_i_size``
+
+   The size of the file on the server.  This differs from inode->i_size if
+   local modifications have been made but not yet written back.
+
+ * ``flags``
+
+   A set of flags, some of which the filesystem might be interested in:
+
+   * ``NETFS_ICTX_MODIFIED_ATTR``
+
+     Set if netfslib modifies mtime/ctime.  The filesystem is free to ignore
+     this or clear it.
+
+   * ``NETFS_ICTX_UNBUFFERED``
+
+     Do unbuffered I/O upon the file.  Like direct I/O but without the
+     alignment limitations.  RMW will be performed if necessary.  The pagecache
+     will not be used unless mmap() is also used.
+
+   * ``NETFS_ICTX_WRITETHROUGH``
+
+     Do writethrough caching upon the file.  I/O will be set up and dispatched
+     as buffered writes are made to the page cache.  mmap() does the normal
+     writeback thing.
+
+   * ``NETFS_ICTX_SINGLE_NO_UPLOAD``
+
+     Set if the file has a monolithic content that must be read entirely in a
+     single go and must not be written back to the server, though it can be
+     cached (e.g. AFS directories).
 
 Inode Context Helper Functions
 ------------------------------
@@ -84,117 +273,250 @@ set the operations table pointer::
 
 then a function to cast from the VFS inode structure to the netfs context::
 
-	struct netfs_inode *netfs_node(struct inode *inode);
+	struct netfs_inode *netfs_inode(struct inode *inode);
 
 and finally, a function to get the cache cookie pointer from the context
 attached to an inode (or NULL if fscache is disabled)::
 
 	struct fscache_cookie *netfs_i_cookie(struct netfs_inode *ctx);
 
+Inode Locking
+-------------
+
+A number of functions are provided to manage the locking of i_rwsem for I/O and
+to effectively extend it to provide more separate classes of exclusion::
+
+	int netfs_start_io_read(struct inode *inode);
+	void netfs_end_io_read(struct inode *inode);
+	int netfs_start_io_write(struct inode *inode);
+	void netfs_end_io_write(struct inode *inode);
+	int netfs_start_io_direct(struct inode *inode);
+	void netfs_end_io_direct(struct inode *inode);
+
+The exclusion breaks down into four separate classes:
+
+ 1) Buffered reads and writes.
+
+    Buffered reads can run concurrently each other and with buffered writes,
+    but buffered writes cannot run concurrently with each other.
+
+ 2) Direct reads and writes.
+
+    Direct (and unbuffered) reads and writes can run concurrently since they do
+    not share local buffering (i.e. the pagecache) and, in a network
+    filesystem, are expected to have exclusion managed on the server (though
+    this may not be the case for, say, Ceph).
+
+ 3) Other major inode modifying operations (e.g. truncate, fallocate).
+
+    These should just access i_rwsem directly.
+
+ 4) mmap().
+
+    mmap'd accesses might operate concurrently with any of the other classes.
+    They might form the buffer for an intra-file loopback DIO read/write.  They
+    might be permitted on unbuffered files.
+
+Inode Writeback
+---------------
+
+Netfslib will pin resources on an inode for future writeback (such as pinning
+use of an fscache cookie) when an inode is dirtied.  However, this pinning
+needs careful management.  To manage the pinning, the following sequence
+occurs:
+
+ 1) An inode state flag ``I_PINNING_NETFS_WB`` is set by netfslib when the
+    pinning begins (when a folio is dirtied, for example) if the cache is
+    active to stop the cache structures from being discarded and the cache
+    space from being culled.  This also prevents re-getting of cache resources
+    if the flag is already set.
+
+ 2) This flag then cleared inside the inode lock during inode writeback in the
+    VM - and the fact that it was set is transferred to ``->unpinned_netfs_wb``
+    in ``struct writeback_control``.
+
+ 3) If ``->unpinned_netfs_wb`` is now set, the write_inode procedure is forced.
+
+ 4) The filesystem's ``->write_inode()`` function is invoked to do the cleanup.
+
+ 5) The filesystem invokes netfs to do its cleanup.
+
+To do the cleanup, netfslib provides a function to do the resource unpinning::
+
+	int netfs_unpin_writeback(struct inode *inode, struct writeback_control *wbc);
+
+If the filesystem doesn't need to do anything else, this may be set as a its
+``.write_inode`` method.
+
+Further, if an inode is deleted, the filesystem's write_inode method may not
+get called, so::
 
-Buffered Read Helpers
-=====================
+	void netfs_clear_inode_writeback(struct inode *inode, const void *aux);
 
-The library provides a set of read helpers that handle the ->read_folio(),
-->readahead() and much of the ->write_begin() VM operations and translate them
-into a common call framework.
+must be called from ``->evict_inode()`` *before* ``clear_inode()`` is called.
 
-The following services are provided:
 
- * Handle folios that span multiple pages.
+High-Level VFS API
+==================
 
- * Insulate the netfs from VM interface changes.
+Netfslib provides a number of sets of API calls for the filesystem to delegate
+VFS operations to.  Netfslib, in turn, will call out to the filesystem and the
+cache to negotiate I/O sizes, issue RPCs and provide places for it to intervene
+at various times.
 
- * Allow the netfs to arbitrarily split reads up into pieces, even ones that
-   don't match folio sizes or folio alignments and that may cross folios.
+Unlocked Read/Write Iter
+------------------------
 
- * Allow the netfs to expand a readahead request in both directions to meet its
-   needs.
+The first API set is for the delegation of operations to netfslib when the
+filesystem is called through the standard VFS read/write_iter methods::
 
- * Allow the netfs to partially fulfil a read, which will then be resubmitted.
+	ssize_t netfs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter);
+	ssize_t netfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from);
+	ssize_t netfs_buffered_read_iter(struct kiocb *iocb, struct iov_iter *iter);
+	ssize_t netfs_unbuffered_read_iter(struct kiocb *iocb, struct iov_iter *iter);
+	ssize_t netfs_unbuffered_write_iter(struct kiocb *iocb, struct iov_iter *from);
 
- * Handle local caching, allowing cached data and server-read data to be
-   interleaved for a single request.
+They can be assigned directly to ``.read_iter`` and ``.write_iter``.  They
+perform the inode locking themselves and the first two will switch between
+buffered I/O and DIO as appropriate.
 
- * Handle clearing of bufferage that isn't on the server.
+Pre-Locked Read/Write Iter
+--------------------------
 
- * Handle retrying of reads that failed, switching reads from the cache to the
-   server as necessary.
+The second API set is for the delegation of operations to netfslib when the
+filesystem is called through the standard VFS methods, but needs to do some
+other stuff before or after calling netfslib whilst still inside locked section
+(e.g. Ceph negotiating caps).  The unbuffered read function is::
 
- * In the future, this is a place that other services can be performed, such as
-   local encryption of data to be stored remotely or in the cache.
+	ssize_t netfs_unbuffered_read_iter_locked(struct kiocb *iocb, struct iov_iter *iter);
 
-From the network filesystem, the helpers require a table of operations.  This
-includes a mandatory method to issue a read operation along with a number of
-optional methods.
+This must not be assigned directly to ``.read_iter`` and the filesystem is
+responsible for performing the inode locking before calling it.  In the case of
+buffered read, the filesystem should use ``filemap_read()``.
 
+There are three functions for writes::
 
-Read Helper Functions
+	ssize_t netfs_buffered_write_iter_locked(struct kiocb *iocb, struct iov_iter *from,
+						 struct netfs_group *netfs_group);
+	ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter,
+				    struct netfs_group *netfs_group);
+	ssize_t netfs_unbuffered_write_iter_locked(struct kiocb *iocb, struct iov_iter *iter,
+						   struct netfs_group *netfs_group);
+
+These must not be assigned directly to ``.write_iter`` and the filesystem is
+responsible for performing the inode locking before calling them.
+
+The first two functions are for buffered writes; the first just adds some
+standard write checks and jumps to the second, but if the filesystem wants to
+do the checks itself, it can use the second directly.  The third function is
+for unbuffered or DIO writes.
+
+On all three write functions, there is a writeback group pointer (which should
+be NULL if the filesystem doesn't use this).  Writeback groups are set on
+folios when they're modified.  If a folio to-be-modified is already marked with
+a different group, it is flushed first.  The writeback API allows writing back
+of a specific group.
+
+Memory-Mapped I/O API
 ---------------------
 
-Three read helpers are provided::
+An API for support of mmap()'d I/O is provided::
+
+	vm_fault_t netfs_page_mkwrite(struct vm_fault *vmf, struct netfs_group *netfs_group);
+
+This allows the filesystem to delegate ``.page_mkwrite`` to netfslib.  The
+filesystem should not take the inode lock before calling it, but, as with the
+locked write functions above, this does take a writeback group pointer.  If the
+page to be made writable is in a different group, it will be flushed first.
+
+Monolithic Files API
+--------------------
+
+There is also a special API set for files for which the content must be read in
+a single RPC (and not written back) and is maintained as a monolithic blob
+(e.g. an AFS directory), though it can be stored and updated in the local cache::
+
+	ssize_t netfs_read_single(struct inode *inode, struct file *file, struct iov_iter *iter);
+	void netfs_single_mark_inode_dirty(struct inode *inode);
+	int netfs_writeback_single(struct address_space *mapping,
+				   struct writeback_control *wbc,
+				   struct iov_iter *iter);
 
-	void netfs_readahead(struct readahead_control *ractl);
-	int netfs_read_folio(struct file *file,
-			     struct folio *folio);
-	int netfs_write_begin(struct netfs_inode *ctx,
-			      struct file *file,
-			      struct address_space *mapping,
-			      loff_t pos,
-			      unsigned int len,
-			      struct folio **_folio,
-			      void **_fsdata);
+The first function reads from a file into the given buffer, reading from the
+cache in preference if the data is cached there; the second function allows the
+inode to be marked dirty, causing a later writeback; and the third function can
+be called from the writeback code to write the data to the cache, if there is
+one.
 
-Each corresponds to a VM address space operation.  These operations use the
-state in the per-inode context.
+The inode should be marked ``NETFS_ICTX_SINGLE_NO_UPLOAD`` if this API is to be
+used.  The writeback function requires the buffer to be of ITER_FOLIOQ type.
 
-For ->readahead() and ->read_folio(), the network filesystem just point directly
-at the corresponding read helper; whereas for ->write_begin(), it may be a
-little more complicated as the network filesystem might want to flush
-conflicting writes or track dirty data and needs to put the acquired folio if
-an error occurs after calling the helper.
+High-Level VM API
+==================
 
-The helpers manage the read request, calling back into the network filesystem
-through the supplied table of operations.  Waits will be performed as
-necessary before returning for helpers that are meant to be synchronous.
+Netfslib also provides a number of sets of API calls for the filesystem to
+delegate VM operations to.  Again, netfslib, in turn, will call out to the
+filesystem and the cache to negotiate I/O sizes, issue RPCs and provide places
+for it to intervene at various times::
 
-If an error occurs, the ->free_request() will be called to clean up the
-netfs_io_request struct allocated.  If some parts of the request are in
-progress when an error occurs, the request will get partially completed if
-sufficient data is read.
+	void netfs_readahead(struct readahead_control *);
+	int netfs_read_folio(struct file *, struct folio *);
+	int netfs_writepages(struct address_space *mapping,
+			     struct writeback_control *wbc);
+	bool netfs_dirty_folio(struct address_space *mapping, struct folio *folio);
+	void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length);
+	bool netfs_release_folio(struct folio *folio, gfp_t gfp);
 
-Additionally, there is::
+These are ``address_space_operations`` methods and can be set directly in the
+operations table.
 
-  * void netfs_subreq_terminated(struct netfs_io_subrequest *subreq,
-				 ssize_t transferred_or_error,
-				 bool was_async);
+Deprecated PG_private_2 API
+---------------------------
 
-which should be called to complete a read subrequest.  This is given the number
-of bytes transferred or a negative error code, plus a flag indicating whether
-the operation was asynchronous (ie. whether the follow-on processing can be
-done in the current context, given this may involve sleeping).
+There is also a deprecated function for filesystems that still use the
+``->write_begin`` method::
 
+	int netfs_write_begin(struct netfs_inode *inode, struct file *file,
+			      struct address_space *mapping, loff_t pos, unsigned int len,
+			      struct folio **_folio, void **_fsdata);
 
-Read Helper Structures
-----------------------
+It uses the deprecated PG_private_2 flag and so should not be used.
 
-The read helpers make use of a couple of structures to maintain the state of
-the read.  The first is a structure that manages a read request as a whole::
+
+I/O Request API
+===============
+
+The I/O request API comprises a number of structures and a number of functions
+that the filesystem may need to use.
+
+Request Structure
+-----------------
+
+The request structure manages the request as a whole, holding some resources
+and state on behalf of the filesystem and tracking the collection of results::
 
 	struct netfs_io_request {
+		enum netfs_io_origin	origin;
 		struct inode		*inode;
 		struct address_space	*mapping;
-		struct netfs_cache_resources cache_resources;
+		struct netfs_group	*group;
+		struct netfs_io_stream	io_streams[];
 		void			*netfs_priv;
-		loff_t			start;
-		size_t			len;
-		loff_t			i_size;
-		const struct netfs_request_ops *netfs_ops;
+		void			*netfs_priv2;
+		unsigned long long	start;
+		unsigned long long	len;
+		unsigned long long	i_size;
 		unsigned int		debug_id;
+		unsigned long		flags;
 		...
 	};
 
-The above fields are the ones the netfs can use.  They are:
+Many of the fields are for internal use, but the fields shown here are of
+interest to the filesystem:
+
+ * ``origin``
+
+   The origin of the request (readahead, read_folio, DIO read, writeback, ...).
 
  * ``inode``
  * ``mapping``
@@ -202,11 +524,19 @@ The above fields are the ones the netfs can use.  They are:
    The inode and the address space of the file being read from.  The mapping
    may or may not point to inode->i_data.
 
- * ``cache_resources``
+ * ``group``
+
+   The writeback group this request is dealing with or NULL.  This holds a ref
+   on the group.
 
-   Resources for the local cache to use, if present.
+ * ``io_streams``
+
+   The parallel streams of subrequests available to the request.  Currently two
+   are available, but this may be made extensible in future.  ``NR_IO_STREAMS``
+   indicates the size of the array.
 
  * ``netfs_priv``
+ * ``netfs_priv2``
 
    The network filesystem's private data.  The value for this can be passed in
    to the helper functions or set during the request.
@@ -221,37 +551,121 @@ The above fields are the ones the netfs can use.  They are:
 
    The size of the file at the start of the request.
 
- * ``netfs_ops``
-
-   A pointer to the operation table.  The value for this is passed into the
-   helper functions.
-
  * ``debug_id``
 
    A number allocated to this operation that can be displayed in trace lines
    for reference.
 
+ * ``flags``
+
+   Flags for managing and controlling the operation of the request.  Some of
+   these may be of interest to the filesystem:
+
+   * ``NETFS_RREQ_RETRYING``
+
+     Netfslib sets this when generating retries.
+
+   * ``NETFS_RREQ_PAUSE``
+
+     The filesystem can set this to request to pause the library's subrequest
+     issuing loop - but care needs to be taken as netfslib may also set it.
+
+   * ``NETFS_RREQ_NONBLOCK``
+   * ``NETFS_RREQ_BLOCKED``
+
+     Netfslib sets the first to indicate that non-blocking mode was set by the
+     caller and the filesystem can set the second to indicate that it would
+     have had to block.
+
+   * ``NETFS_RREQ_USE_PGPRIV2``
+
+     The filesystem can set this if it wants to use PG_private_2 to track
+     whether a folio is being written to the cache.  This is deprecated as
+     PG_private_2 is going to go away.
+
+If the filesystem wants more private data than is afforded by this structure,
+then it should wrap it and provide its own allocator.
+
+Stream Structure
+----------------
+
+A request is comprised of one or more parallel streams and each stream may be
+aimed at a different target.
+
+For read requests, only stream 0 is used.  This can contain a mixture of
+subrequests aimed at different sources.  For write requests, stream 0 is used
+for the server and stream 1 is used for the cache.  For buffered writeback,
+stream 0 is not enabled unless a normal dirty folio is encountered, at which
+point ->begin_writeback() will be invoked and the filesystem can mark the
+stream available.
+
+The stream struct looks like::
 
-The second structure is used to manage individual slices of the overall read
-request::
+	struct netfs_io_stream {
+		unsigned char		stream_nr;
+		bool			avail;
+		size_t			sreq_max_len;
+		unsigned int		sreq_max_segs;
+		unsigned int		submit_extendable_to;
+		...
+	};
+
+A number of members are available for access/use by the filesystem:
+
+ * ``stream_nr``
+
+   The number of the stream within the request.
+
+ * ``avail``
+
+   True if the stream is available for use.  The filesystem should set this on
+   stream zero if in ->begin_writeback().
+
+ * ``sreq_max_len``
+ * ``sreq_max_segs``
+
+   These are set by the filesystem or the cache in ->prepare_read() or
+   ->prepare_write() for each subrequest to indicate the maximum number of
+   bytes and, optionally, the maximum number of segments (if not 0) that that
+   subrequest can support.
+
+ * ``submit_extendable_to``
+
+   The size that a subrequest can be rounded up to beyond the EOF, given the
+   available buffer.  This allows the cache to work out if it can do a DIO read
+   or write that straddles the EOF marker.
+
+Subrequest Structure
+--------------------
+
+Individual units of I/O are managed by the subrequest structure.  These
+represent slices of the overall request and run independently::
 
 	struct netfs_io_subrequest {
 		struct netfs_io_request *rreq;
-		loff_t			start;
+		struct iov_iter		io_iter;
+		unsigned long long	start;
 		size_t			len;
 		size_t			transferred;
 		unsigned long		flags;
+		short			error;
 		unsigned short		debug_index;
+		unsigned char		stream_nr;
 		...
 	};
 
-Each subrequest is expected to access a single source, though the helpers will
+Each subrequest is expected to access a single source, though the library will
 handle falling back from one source type to another.  The members are:
 
  * ``rreq``
 
    A pointer to the read request.
 
+ * ``io_iter``
+
+   An I/O iterator representing a slice of the buffer to be read into or
+   written from.
+
  * ``start``
  * ``len``
 
@@ -260,241 +674,295 @@ handle falling back from one source type to another.  The members are:
 
  * ``transferred``
 
-   The amount of data transferred so far of the length of this slice.  The
-   network filesystem or cache should start the operation this far into the
-   slice.  If a short read occurs, the helpers will call again, having updated
-   this to reflect the amount read so far.
+   The amount of data transferred so far for this subrequest.  This should be
+   added to with the length of the transfer made by this issuance of the
+   subrequest.  If this is less than ``len`` then the subrequest may be
+   reissued to continue.
 
  * ``flags``
 
-   Flags pertaining to the read.  There are two of interest to the filesystem
-   or cache:
+   Flags for managing the subrequest.  There are a number of interest to the
+   filesystem or cache:
+
+   * ``NETFS_SREQ_MADE_PROGRESS``
+
+     Set by the filesystem to indicates that at least one byte of data was read
+     or written.
+
+   * ``NETFS_SREQ_HIT_EOF``
+
+     The filesystem should set this if a read hit the EOF on the file (in which
+     case ``transferred`` should stop at the EOF).  Netfslib may expand the
+     subrequest out to the size of the folio containing the EOF on the off
+     chance that a third party change happened or a DIO read may have asked for
+     more than is available.  The library will clear any excess pagecache.
 
    * ``NETFS_SREQ_CLEAR_TAIL``
 
-     This can be set to indicate that the remainder of the slice, from
-     transferred to len, should be cleared.
+     The filesystem can set this to indicate that the remainder of the slice,
+     from transferred to len, should be cleared.  Do not set if HIT_EOF is set.
+
+   * ``NETFS_SREQ_NEED_RETRY``
+
+     The filesystem can set this to tell netfslib to retry the subrequest.
+
+   * ``NETFS_SREQ_BOUNDARY``
+
+     This can be set by the filesystem on a subrequest to indicate that it ends
+     at a boundary with the filesystem structure (e.g. at the end of a Ceph
+     object).  It tells netfslib not to retile subrequests across it.
 
-   * ``NETFS_SREQ_SEEK_DATA_READ``
+ * ``error``
 
-     This is a hint to the cache that it might want to try skipping ahead to
-     the next data (ie. using SEEK_DATA).
+   This is for the filesystem to store result of the subrequest.  It should be
+   set to 0 if successful and a negative error code otherwise.
 
  * ``debug_index``
+ * ``stream_nr``
 
    A number allocated to this slice that can be displayed in trace lines for
-   reference.
+   reference and the number of the request stream that it belongs to.
 
+If necessary, the filesystem can get and put extra refs on the subrequest it is
+given::
 
-Read Helper Operations
-----------------------
+	void netfs_get_subrequest(struct netfs_io_subrequest *subreq,
+				  enum netfs_sreq_ref_trace what);
+	void netfs_put_subrequest(struct netfs_io_subrequest *subreq,
+				  enum netfs_sreq_ref_trace what);
 
-The network filesystem must provide the read helpers with a table of operations
-through which it can issue requests and negotiate::
+using netfs trace codes to indicate the reason.  Care must be taken, however,
+as once control of the subrequest is returned to netfslib, the same subrequest
+can be reissued/retried.
+
+Filesystem Methods
+------------------
+
+The filesystem sets a table of operations in ``netfs_inode`` for netfslib to
+use::
 
 	struct netfs_request_ops {
-		void (*init_request)(struct netfs_io_request *rreq, struct file *file);
+		mempool_t *request_pool;
+		mempool_t *subrequest_pool;
+		int (*init_request)(struct netfs_io_request *rreq, struct file *file);
 		void (*free_request)(struct netfs_io_request *rreq);
+		void (*free_subrequest)(struct netfs_io_subrequest *rreq);
 		void (*expand_readahead)(struct netfs_io_request *rreq);
-		bool (*clamp_length)(struct netfs_io_subrequest *subreq);
+		int (*prepare_read)(struct netfs_io_subrequest *subreq);
 		void (*issue_read)(struct netfs_io_subrequest *subreq);
-		bool (*is_still_valid)(struct netfs_io_request *rreq);
-		int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
-					 struct folio **foliop, void **_fsdata);
 		void (*done)(struct netfs_io_request *rreq);
+		void (*update_i_size)(struct inode *inode, loff_t i_size);
+		void (*post_modify)(struct inode *inode);
+		void (*begin_writeback)(struct netfs_io_request *wreq);
+		void (*prepare_write)(struct netfs_io_subrequest *subreq);
+		void (*issue_write)(struct netfs_io_subrequest *subreq);
+		void (*retry_request)(struct netfs_io_request *wreq,
+				      struct netfs_io_stream *stream);
+		void (*invalidate_cache)(struct netfs_io_request *wreq);
 	};
 
-The operations are as follows:
-
- * ``init_request()``
+The table starts with a pair of optional pointers to memory pools from which
+requests and subrequests can be allocated.  If these are not given, netfslib
+has default pools that it will use instead.  If the filesystem wraps the netfs
+structs in its own larger structs, then it will need to use its own pools.
+Netfslib will allocate directly from the pools.
 
-   [Optional] This is called to initialise the request structure.  It is given
-   the file for reference.
+The methods defined in the table are:
 
+ * ``init_request()``
  * ``free_request()``
+ * ``free_subrequest()``
 
-   [Optional] This is called as the request is being deallocated so that the
-   filesystem can clean up any state it has attached there.
+   [Optional] A filesystem may implement these to initialise or clean up any
+   resources that it attaches to the request or subrequest.
 
  * ``expand_readahead()``
 
    [Optional] This is called to allow the filesystem to expand the size of a
-   readahead read request.  The filesystem gets to expand the request in both
-   directions, though it's not permitted to reduce it as the numbers may
-   represent an allocation already made.  If local caching is enabled, it gets
-   to expand the request first.
+   readahead request.  The filesystem gets to expand the request in both
+   directions, though it must retain the initial region as that may represent
+   an allocation already made.  If local caching is enabled, it gets to expand
+   the request first.
 
    Expansion is communicated by changing ->start and ->len in the request
    structure.  Note that if any change is made, ->len must be increased by at
    least as much as ->start is reduced.
 
- * ``clamp_length()``
-
-   [Optional] This is called to allow the filesystem to reduce the size of a
-   subrequest.  The filesystem can use this, for example, to chop up a request
-   that has to be split across multiple servers or to put multiple reads in
-   flight.
-
-   This should return 0 on success and an error code on error.
-
- * ``issue_read()``
+ * ``prepare_read()``
 
-   [Required] The helpers use this to dispatch a subrequest to the server for
-   reading.  In the subrequest, ->start, ->len and ->transferred indicate what
-   data should be read from the server.
+   [Optional] This is called to allow the filesystem to limit the size of a
+   subrequest.  It may also limit the number of individual regions in iterator,
+   such as required by RDMA.  This information should be set on stream zero in::
 
-   There is no return value; the netfs_subreq_terminated() function should be
-   called to indicate whether or not the operation succeeded and how much data
-   it transferred.  The filesystem also should not deal with setting folios
-   uptodate, unlocking them or dropping their refs - the helpers need to deal
-   with this as they have to coordinate with copying to the local cache.
+	rreq->io_streams[0].sreq_max_len
+	rreq->io_streams[0].sreq_max_segs
 
-   Note that the helpers have the folios locked, but not pinned.  It is
-   possible to use the ITER_XARRAY iov iterator to refer to the range of the
-   inode that is being operated upon without the need to allocate large bvec
-   tables.
+   The filesystem can use this, for example, to chop up a request that has to
+   be split across multiple servers or to put multiple reads in flight.
 
- * ``is_still_valid()``
+   Zero should be returned on success and an error code otherwise.
 
-   [Optional] This is called to find out if the data just read from the local
-   cache is still valid.  It should return true if it is still valid and false
-   if not.  If it's not still valid, it will be reread from the server.
+ * ``issue_read()``
 
- * ``check_write_begin()``
+   [Required] Netfslib calls this to dispatch a subrequest to the server for
+   reading.  In the subrequest, ->start, ->len and ->transferred indicate what
+   data should be read from the server and ->io_iter indicates the buffer to be
+   used.
 
-   [Optional] This is called from the netfs_write_begin() helper once it has
-   allocated/grabbed the folio to be modified to allow the filesystem to flush
-   conflicting state before allowing it to be modified.
+   There is no return value; the ``netfs_read_subreq_terminated()`` function
+   should be called to indicate that the subrequest completed either way.
+   ->error, ->transferred and ->flags should be updated before completing.  The
+   termination can be done asynchronously.
 
-   It may unlock and discard the folio it was given and set the caller's folio
-   pointer to NULL.  It should return 0 if everything is now fine (``*foliop``
-   left set) or the op should be retried (``*foliop`` cleared) and any other
-   error code to abort the operation.
+   Note: the filesystem must not deal with setting folios uptodate, unlocking
+   them or dropping their refs - the library deals with this as it may have to
+   stitch together the results of multiple subrequests that variously overlap
+   the set of folios.
 
- * ``done``
+ * ``done()``
 
-   [Optional] This is called after the folios in the request have all been
+   [Optional] This is called after the folios in a read request have all been
    unlocked (and marked uptodate if applicable).
 
+ * ``update_i_size()``
+
+   [Optional] This is invoked by netfslib at various points during the write
+   paths to ask the filesystem to update its idea of the file size.  If not
+   given, netfslib will set i_size and i_blocks and update the local cache
+   cookie.
+   
+ * ``post_modify()``
+
+   [Optional] This is called after netfslib writes to the pagecache or when it
+   allows an mmap'd page to be marked as writable.
+   
+ * ``begin_writeback()``
+
+   [Optional] Netfslib calls this when processing a writeback request if it
+   finds a dirty page that isn't simply marked NETFS_FOLIO_COPY_TO_CACHE,
+   indicating it must be written to the server.  This allows the filesystem to
+   only set up writeback resources when it knows it's going to have to perform
+   a write.
+   
+ * ``prepare_write()``
 
+   [Optional] This is called to allow the filesystem to limit the size of a
+   subrequest.  It may also limit the number of individual regions in iterator,
+   such as required by RDMA.  This information should be set on stream to which
+   the subrequest belongs::
 
-Read Helper Procedure
----------------------
-
-The read helpers work by the following general procedure:
-
- * Set up the request.
-
- * For readahead, allow the local cache and then the network filesystem to
-   propose expansions to the read request.  This is then proposed to the VM.
-   If the VM cannot fully perform the expansion, a partially expanded read will
-   be performed, though this may not get written to the cache in its entirety.
-
- * Loop around slicing chunks off of the request to form subrequests:
-
-   * If a local cache is present, it gets to do the slicing, otherwise the
-     helpers just try to generate maximal slices.
-
-   * The network filesystem gets to clamp the size of each slice if it is to be
-     the source.  This allows rsize and chunking to be implemented.
+	rreq->io_streams[subreq->stream_nr].sreq_max_len
+	rreq->io_streams[subreq->stream_nr].sreq_max_segs
 
-   * The helpers issue a read from the cache or a read from the server or just
-     clears the slice as appropriate.
+   The filesystem can use this, for example, to chop up a request that has to
+   be split across multiple servers or to put multiple writes in flight.
 
-   * The next slice begins at the end of the last one.
+   This is not permitted to return an error.  Instead, in the event of failure,
+   ``netfs_prepare_write_failed()`` must be called.
 
-   * As slices finish being read, they terminate.
+ * ``issue_write()``
 
- * When all the subrequests have terminated, the subrequests are assessed and
-   any that are short or have failed are reissued:
+   [Required] This is used to dispatch a subrequest to the server for writing.
+   In the subrequest, ->start, ->len and ->transferred indicate what data
+   should be written to the server and ->io_iter indicates the buffer to be
+   used.
 
-   * Failed cache requests are issued against the server instead.
+   There is no return value; the ``netfs_write_subreq_terminated()`` function
+   should be called to indicate that the subrequest completed either way.
+   ->error, ->transferred and ->flags should be updated before completing.  The
+   termination can be done asynchronously.
 
-   * Failed server requests just fail.
+   Note: the filesystem must not deal with removing the dirty or writeback
+   marks on folios involved in the operation and should not take refs or pins
+   on them, but should leave retention to netfslib.
 
-   * Short reads against either source will be reissued against that source
-     provided they have transferred some more data:
+ * ``retry_request()``
 
-     * The cache may need to skip holes that it can't do DIO from.
+   [Optional] Netfslib calls this at the beginning of a retry cycle.  This
+   allows the filesystem to examine the state of the request, the subrequests
+   in the indicated stream and of its own data and make adjustments or
+   renegotiate resources.
+   
+ * ``invalidate_cache()``
 
-     * If NETFS_SREQ_CLEAR_TAIL was set, a short read will be cleared to the
-       end of the slice instead of reissuing.
+   [Optional] This is called by netfslib to invalidate data stored in the local
+   cache in the event that writing to the local cache fails, providing updated
+   coherency data that netfs can't provide.
 
- * Once the data is read, the folios that have been fully read/cleared:
+Terminating a subrequest
+------------------------
 
-   * Will be marked uptodate.
+When a subrequest completes, there are a number of functions that the cache or
+subrequest can call to inform netfslib of the status change.  One function is
+provided to terminate a write subrequest at the preparation stage and acts
+synchronously:
 
-   * If a cache is present, will be marked with PG_fscache.
+ * ``void netfs_prepare_write_failed(struct netfs_io_subrequest *subreq);``
 
-   * Unlocked
+   Indicate that the ->prepare_write() call failed.  The ``error`` field should
+   have been updated.
 
- * Any folios that need writing to the cache will then have DIO writes issued.
+Note that ->prepare_read() can return an error as a read can simply be aborted.
+Dealing with writeback failure is trickier.
 
- * Synchronous operations will wait for reading to be complete.
+The other functions are used for subrequests that got as far as being issued:
 
- * Writes to the cache will proceed asynchronously and the folios will have the
-   PG_fscache mark removed when that completes.
+ * ``void netfs_read_subreq_terminated(struct netfs_io_subrequest *subreq);``
 
- * The request structures will be cleaned up when everything has completed.
+   Tell netfslib that a read subrequest has terminated.  The ``error``,
+   ``flags`` and ``transferred`` fields should have been updated.
 
+ * ``void netfs_write_subrequest_terminated(void *_op, ssize_t transferred_or_error);``
 
-Read Helper Cache API
----------------------
+   Tell netfslib that a write subrequest has terminated.  Either the amount of
+   data processed or the negative error code can be passed in.  This is
+   can be used as a kiocb completion function.
 
-When implementing a local cache to be used by the read helpers, two things are
-required: some way for the network filesystem to initialise the caching for a
-read request and a table of operations for the helpers to call.
+ * ``void netfs_read_subreq_progress(struct netfs_io_subrequest *subreq);``
 
-To begin a cache operation on an fscache object, the following function is
-called::
+   This is provided to optionally update netfslib on the incremental progress
+   of a read, allowing some folios to be unlocked early and does not actually
+   terminate the subrequest.  The ``transferred`` field should have been
+   updated.
 
-	int fscache_begin_read_operation(struct netfs_io_request *rreq,
-					 struct fscache_cookie *cookie);
+Local Cache API
+---------------
 
-passing in the request pointer and the cookie corresponding to the file.  This
-fills in the cache resources mentioned below.
+Netfslib provides a separate API for a local cache to implement, though it
+provides some somewhat similar routines to the filesystem request API.
 
-The netfs_io_request object contains a place for the cache to hang its
+Firstly, the netfs_io_request object contains a place for the cache to hang its
 state::
 
 	struct netfs_cache_resources {
 		const struct netfs_cache_ops	*ops;
 		void				*cache_priv;
 		void				*cache_priv2;
+		unsigned int			debug_id;
+		unsigned int			inval_counter;
 	};
 
-This contains an operations table pointer and two private pointers.  The
-operation table looks like the following::
+This contains an operations table pointer and two private pointers plus the
+debug ID of the fscache cookie for tracing purposes and an invalidation counter
+that is cranked by calls to ``fscache_invalidate()`` allowing cache subrequests
+to be invalidated after completion.
+
+The cache operation table looks like the following::
 
 	struct netfs_cache_ops {
 		void (*end_operation)(struct netfs_cache_resources *cres);
-
 		void (*expand_readahead)(struct netfs_cache_resources *cres,
 					 loff_t *_start, size_t *_len, loff_t i_size);
-
 		enum netfs_io_source (*prepare_read)(struct netfs_io_subrequest *subreq,
-						       loff_t i_size);
-
+						     loff_t i_size);
 		int (*read)(struct netfs_cache_resources *cres,
 			    loff_t start_pos,
 			    struct iov_iter *iter,
 			    bool seek_data,
 			    netfs_io_terminated_t term_func,
 			    void *term_func_priv);
-
-		int (*prepare_write)(struct netfs_cache_resources *cres,
-				     loff_t *_start, size_t *_len, loff_t i_size,
-				     bool no_space_allocated_yet);
-
-		int (*write)(struct netfs_cache_resources *cres,
-			     loff_t start_pos,
-			     struct iov_iter *iter,
-			     netfs_io_terminated_t term_func,
-			     void *term_func_priv);
-
-		int (*query_occupancy)(struct netfs_cache_resources *cres,
-				       loff_t start, size_t len, size_t granularity,
-				       loff_t *_data_start, size_t *_data_len);
+		void (*prepare_write_subreq)(struct netfs_io_subrequest *subreq);
+		void (*issue_write)(struct netfs_io_subrequest *subreq);
 	};
 
 With a termination handler function pointer::
@@ -511,10 +979,16 @@ The methods defined in the table are:
 
  * ``expand_readahead()``
 
-   [Optional] Called at the beginning of a netfs_readahead() operation to allow
-   the cache to expand a request in either direction.  This allows the cache to
+   [Optional] Called at the beginning of a readahead operation to allow the
+   cache to expand a request in either direction.  This allows the cache to
    size the request appropriately for the cache granularity.
 
+ * ``prepare_read()``
+
+   [Required] Called to configure the next slice of a request.  ->start and
+   ->len in the subrequest indicate where and how big the next slice can be;
+   the cache gets to reduce the length to match its granularity requirements.
+
    The function is passed pointers to the start and length in its parameters,
    plus the size of the file for reference, and adjusts the start and length
    appropriately.  It should return one of:
@@ -528,12 +1002,6 @@ The methods defined in the table are:
    downloaded from the server or read from the cache - or whether slicing
    should be given up at the current point.
 
- * ``prepare_read()``
-
-   [Required] Called to configure the next slice of a request.  ->start and
-   ->len in the subrequest indicate where and how big the next slice can be;
-   the cache gets to reduce the length to match its granularity requirements.
-
  * ``read()``
 
    [Required] Called to read from the cache.  The start file offset is given
@@ -547,44 +1015,33 @@ The methods defined in the table are:
    indicating whether the termination is definitely happening in the caller's
    context.
 
- * ``prepare_write()``
+ * ``prepare_write_subreq()``
 
-   [Required] Called to prepare a write to the cache to take place.  This
-   involves checking to see whether the cache has sufficient space to honour
-   the write.  ``*_start`` and ``*_len`` indicate the region to be written; the
-   region can be shrunk or it can be expanded to a page boundary either way as
-   necessary to align for direct I/O.  i_size holds the size of the object and
-   is provided for reference.  no_space_allocated_yet is set to true if the
-   caller is certain that no data has been written to that region - for example
-   if it tried to do a read from there already.
+   [Required] This is called to allow the cache to limit the size of a
+   subrequest.  It may also limit the number of individual regions in iterator,
+   such as required by DIO/DMA.  This information should be set on stream to
+   which the subrequest belongs::
 
- * ``write()``
+	rreq->io_streams[subreq->stream_nr].sreq_max_len
+	rreq->io_streams[subreq->stream_nr].sreq_max_segs
 
-   [Required] Called to write to the cache.  The start file offset is given
-   along with an iterator to write from, which gives the length also.
-
-   Also provided is a pointer to a termination handler function and private
-   data to pass to that function.  The termination function should be called
-   with the number of bytes transferred or an error code, plus a flag
-   indicating whether the termination is definitely happening in the caller's
-   context.
+   The filesystem can use this, for example, to chop up a request that has to
+   be split across multiple servers or to put multiple writes in flight.
 
- * ``query_occupancy()``
+   This is not permitted to return an error.  In the event of failure,
+   ``netfs_prepare_write_failed()`` must be called.
 
-   [Required] Called to find out where the next piece of data is within a
-   particular region of the cache.  The start and length of the region to be
-   queried are passed in, along with the granularity to which the answer needs
-   to be aligned.  The function passes back the start and length of the data,
-   if any, available within that region.  Note that there may be a hole at the
-   front.
+ * ``issue_write()``
 
-   It returns 0 if some data was found, -ENODATA if there was no usable data
-   within the region or -ENOBUFS if there is no caching on this file.
+   [Required] This is used to dispatch a subrequest to the cache for writing.
+   In the subrequest, ->start, ->len and ->transferred indicate what data
+   should be written to the cache and ->io_iter indicates the buffer to be
+   used.
 
-Note that these methods are passed a pointer to the cache resource structure,
-not the read request structure as they could be used in other situations where
-there isn't a read request structure as well, such as writing dirty data to the
-cache.
+   There is no return value; the ``netfs_write_subreq_terminated()`` function
+   should be called to indicate that the subrequest completed either way.
+   ->error, ->transferred and ->flags should be updated before completing.  The
+   termination can be done asynchronously.
 
 
 API Function Reference
diff --git linux-libre-6.15-gnu/Documentation/filesystems/overlayfs.rst linux-libre-6.16-gnu/Documentation/filesystems/overlayfs.rst
index 2db379b4b31e..4133a336486d 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/overlayfs.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/overlayfs.rst
@@ -443,6 +443,13 @@ Only the data of the files in the "data-only" lower layers may be visible
 when a "metacopy" file in one of the lower layers above it, has a "redirect"
 to the absolute path of the "lower data" file in the "data-only" lower layer.
 
+Instead of explicitly enabling "metacopy=on" it is sufficient to specify at
+least one data-only layer to enable redirection of data to a data-only layer.
+In this case other forms of metacopy are rejected.  Note: this way data-only
+layers may be used toghether with "userxattr", in which case careful attention
+must be given to privileges needed to change the "user.overlay.redirect" xattr
+to prevent misuse.
+
 Since kernel version v6.8, "data-only" lower layers can also be added using
 the "datadir+" mount options and the fsconfig syscall from new mount api.
 For example::
diff --git linux-libre-6.15-gnu/Documentation/filesystems/porting.rst linux-libre-6.16-gnu/Documentation/filesystems/porting.rst
index 767b2927c762..a5734bdd1cc7 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/porting.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/porting.rst
@@ -1203,3 +1203,58 @@ should use d_drop();d_splice_alias() and return the result of the latter.
 If a positive dentry cannot be returned for some reason, in-kernel
 clients such as cachefiles, nfsd, smb/server may not perform ideally but
 will fail-safe.
+
+---
+
+** mandatory**
+
+lookup_one(), lookup_one_unlocked(), lookup_one_positive_unlocked() now
+take a qstr instead of a name and len.  These, not the "one_len"
+versions, should be used whenever accessing a filesystem from outside
+that filesysmtem, through a mount point - which will have a mnt_idmap.
+
+---
+
+** mandatory**
+
+Functions try_lookup_one_len(), lookup_one_len(),
+lookup_one_len_unlocked() and lookup_positive_unlocked() have been
+renamed to try_lookup_noperm(), lookup_noperm(),
+lookup_noperm_unlocked(), lookup_noperm_positive_unlocked().  They now
+take a qstr instead of separate name and length.  QSTR() can be used
+when strlen() is needed for the length.
+
+For try_lookup_noperm() a reference to the qstr is passed in case the
+hash might subsequently be needed.
+
+These function no longer do any permission checking - they previously
+checked that the caller has 'X' permission on the parent.  They must
+ONLY be used internally by a filesystem on itself when it knows that
+permissions are irrelevant or in a context where permission checks have
+already been performed such as after vfs_path_parent_lookup()
+
+---
+
+** mandatory**
+
+d_hash_and_lookup() is no longer exported or available outside the VFS.
+Use try_lookup_noperm() instead.  This adds name validation and takes
+arguments in the opposite order but is otherwise identical.
+
+Using try_lookup_noperm() will require linux/namei.h to be included.
+
+---
+
+**mandatory**
+
+Calling conventions for ->d_automount() have changed; we should *not* grab
+an extra reference to new mount - it should be returned with refcount 1.
+
+---
+
+collect_mounts()/drop_collected_mounts()/iterate_mounts() are gone now.
+Replacement is collect_paths()/drop_collected_path(), with no special
+iterator needed.  Instead of a cloned mount tree, the new interface returns
+an array of struct path, one for each mount collect_mounts() would've
+created.  These struct path point to locations in the caller's namespace
+that would be roots of the cloned mounts.
diff --git linux-libre-6.15-gnu/Documentation/filesystems/proc.rst linux-libre-6.16-gnu/Documentation/filesystems/proc.rst
index 2a17865dfe39..5236cb52e357 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/proc.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/proc.rst
@@ -584,7 +584,6 @@ encoded manner. The codes are the following:
     ms    may share
     gd    stack segment growns down
     pf    pure PFN range
-    dw    disabled write to the mapped file
     lo    pages are locked in memory
     io    memory mapped I/O area
     sr    sequential read advise provided
@@ -607,8 +606,11 @@ encoded manner. The codes are the following:
     mt    arm64 MTE allocation tags are enabled
     um    userfaultfd missing tracking
     uw    userfaultfd wr-protect tracking
+    ui    userfaultfd minor fault
     ss    shadow/guarded control stack page
     sl    sealed
+    lf    lock on fault pages
+    dp    always lazily freeable mapping
     ==    =======================================
 
 Note that there is no guarantee that every flag and associated mnemonic will
diff --git linux-libre-6.15-gnu/Documentation/filesystems/relay.rst linux-libre-6.16-gnu/Documentation/filesystems/relay.rst
index 04ad083cfe62..301ff4c6e6c6 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/relay.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/relay.rst
@@ -32,7 +32,7 @@ functions in the relay interface code - please see that for details.
 Semantics
 =========
 
-Each relay channel has one buffer per CPU, each buffer has one or more
+Each relay channel has one buffer per CPU; each buffer has one or more
 sub-buffers.  Messages are written to the first sub-buffer until it is
 too full to contain a new message, in which case it is written to
 the next (if available).  Messages are never split across sub-buffers.
@@ -40,7 +40,7 @@ At this point, userspace can be notified so it empties the first
 sub-buffer, while the kernel continues writing to the next.
 
 When notified that a sub-buffer is full, the kernel knows how many
-bytes of it are padding i.e. unused space occurring because a complete
+bytes of it are padding, i.e., unused space occurring because a complete
 message couldn't fit into a sub-buffer.  Userspace can use this
 knowledge to copy only valid data.
 
@@ -71,7 +71,7 @@ klog and relay-apps example code
 ================================
 
 The relay interface itself is ready to use, but to make things easier,
-a couple simple utility functions and a set of examples are provided.
+a couple of simple utility functions and a set of examples are provided.
 
 The relay-apps example tarball, available on the relay sourceforge
 site, contains a set of self-contained examples, each consisting of a
@@ -91,7 +91,7 @@ registered will data actually be logged (see the klog and kleak
 examples for details).
 
 It is of course possible to use the relay interface from scratch,
-i.e. without using any of the relay-apps example code or klog, but
+i.e., without using any of the relay-apps example code or klog, but
 you'll have to implement communication between userspace and kernel,
 allowing both to convey the state of buffers (full, empty, amount of
 padding).  The read() interface both removes padding and internally
@@ -119,7 +119,7 @@ mmap()      results in channel buffer being mapped into the caller's
 	    must map the entire file, which is NRBUF * SUBBUFSIZE.
 
 read()      read the contents of a channel buffer.  The bytes read are
-	    'consumed' by the reader, i.e. they won't be available
+	    'consumed' by the reader, i.e., they won't be available
 	    again to subsequent reads.  If the channel is being used
 	    in no-overwrite mode (the default), it can be read at any
 	    time even if there's an active kernel writer.  If the
@@ -138,7 +138,7 @@ poll()      POLLIN/POLLRDNORM/POLLERR supported.  User applications are
 	    notified when sub-buffer boundaries are crossed.
 
 close()     decrements the channel buffer's refcount.  When the refcount
-	    reaches 0, i.e. when no process or kernel client has the
+	    reaches 0, i.e., when no process or kernel client has the
 	    buffer open, the channel buffer is freed.
 =========== ============================================================
 
@@ -149,7 +149,7 @@ host filesystem must be mounted.  For example::
 
 .. Note::
 
-	the host filesystem doesn't need to be mounted for kernel
+	The host filesystem doesn't need to be mounted for kernel
 	clients to create or use channels - it only needs to be
 	mounted when user space applications need access to the buffer
 	data.
@@ -301,16 +301,6 @@ user-defined data with a channel, and is immediately available
 (including in create_buf_file()) via chan->private_data or
 buf->chan->private_data.
 
-Buffer-only channels
---------------------
-
-These channels have no files associated and can be created with
-relay_open(NULL, NULL, ...). Such channels are useful in scenarios such
-as when doing early tracing in the kernel, before the VFS is up. In these
-cases, one may open a buffer-only channel and then call
-relay_late_setup_files() when the kernel is ready to handle files,
-to expose the buffered data to the userspace.
-
 Channel 'modes'
 ---------------
 
@@ -325,7 +315,7 @@ section, as it pertains mainly to mmap() implementations.
 In 'overwrite' mode, also known as 'flight recorder' mode, writes
 continuously cycle around the buffer and will never fail, but will
 unconditionally overwrite old data regardless of whether it's actually
-been consumed.  In no-overwrite mode, writes will fail, i.e. data will
+been consumed.  In no-overwrite mode, writes will fail, i.e., data will
 be lost, if the number of unconsumed sub-buffers equals the total
 number of sub-buffers in the channel.  It should be clear that if
 there is no consumer or if the consumer can't consume sub-buffers fast
@@ -344,7 +334,7 @@ initialize the next sub-buffer if appropriate 2) finalize the previous
 sub-buffer if appropriate and 3) return a boolean value indicating
 whether or not to actually move on to the next sub-buffer.
 
-To implement 'no-overwrite' mode, the userspace client would provide
+To implement 'no-overwrite' mode, the userspace client provides
 an implementation of the subbuf_start() callback something like the
 following::
 
@@ -364,9 +354,9 @@ following::
 	    return 1;
     }
 
-If the current buffer is full, i.e. all sub-buffers remain unconsumed,
+If the current buffer is full, i.e., all sub-buffers remain unconsumed,
 the callback returns 0 to indicate that the buffer switch should not
-occur yet, i.e. until the consumer has had a chance to read the
+occur yet, i.e., until the consumer has had a chance to read the
 current set of ready sub-buffers.  For the relay_buf_full() function
 to make sense, the consumer is responsible for notifying the relay
 interface when sub-buffers have been consumed via
@@ -400,7 +390,7 @@ consulted.
 
 The default subbuf_start() implementation, used if the client doesn't
 define any callbacks, or doesn't define the subbuf_start() callback,
-implements the simplest possible 'no-overwrite' mode, i.e. it does
+implements the simplest possible 'no-overwrite' mode, i.e., it does
 nothing but return 0.
 
 Header information can be reserved at the beginning of each sub-buffer
@@ -467,7 +457,7 @@ rather than open and close a new channel for each use.  relay_reset()
 can be used for this purpose - it resets a channel to its initial
 state without reallocating channel buffer memory or destroying
 existing mappings.  It should however only be called when it's safe to
-do so, i.e. when the channel isn't currently being written to.
+do so, i.e., when the channel isn't currently being written to.
 
 Finally, there are a couple of utility callbacks that can be used for
 different purposes.  buf_mapped() is called whenever a channel buffer
diff --git linux-libre-6.15-gnu/Documentation/arch/x86/resctrl.rst linux-libre-6.16-gnu/Documentation/filesystems/resctrl.rst
similarity index 99%
rename from Documentation/arch/x86/resctrl.rst
rename to Documentation/filesystems/resctrl.rst
index 6768fc1fad16..c7949dd44f2f 100644
--- linux-libre-6.15-gnu/Documentation/arch/x86/resctrl.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/resctrl.rst
@@ -1,9 +1,9 @@
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-===========================================
-User Interface for Resource Control feature
-===========================================
+=====================================================
+User Interface for Resource Control feature (resctrl)
+=====================================================
 
 :Copyright: |copy| 2016 Intel Corporation
 :Authors: - Fenghua Yu <fenghua.yu@intel.com>
diff --git linux-libre-6.15-gnu/Documentation/filesystems/smb/index.rst linux-libre-6.16-gnu/Documentation/filesystems/smb/index.rst
index 1c8597a679ab..6df23b0e45c8 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/smb/index.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/smb/index.rst
@@ -8,3 +8,4 @@ CIFS
 
    ksmbd
    cifsroot
+   smbdirect
diff --git linux-libre-6.15-gnu/Documentation/filesystems/smb/smbdirect.rst linux-libre-6.16-gnu/Documentation/filesystems/smb/smbdirect.rst
new file mode 100644
index 000000000000..ca6927c0b2c0
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/filesystems/smb/smbdirect.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+SMB Direct - SMB3 over RDMA
+===========================
+
+This document describes how to set up the Linux SMB client and server to
+use RDMA.
+
+Overview
+========
+The Linux SMB kernel client supports SMB Direct, which is a transport
+scheme for SMB3 that uses RDMA (Remote Direct Memory Access) to provide
+high throughput and low latencies by bypassing the traditional TCP/IP
+stack.
+SMB Direct on the Linux SMB client can be tested against KSMBD - a
+kernel-space SMB server.
+
+Installation
+=============
+- Install an RDMA device. As long as the RDMA device driver is supported
+  by the kernel, it should work. This includes both software emulators (soft
+  RoCE, soft iWARP) and hardware devices (InfiniBand, RoCE, iWARP).
+
+- Install a kernel with SMB Direct support. The first kernel release to
+  support SMB Direct on both the client and server side is 5.15. Therefore,
+  a distribution compatible with kernel 5.15 or later is required.
+
+- Install cifs-utils, which provides the `mount.cifs` command to mount SMB
+  shares.
+
+- Configure the RDMA stack
+
+  Make sure that your kernel configuration has RDMA support enabled. Under
+  Device Drivers -> Infiniband support, update the kernel configuration to
+  enable Infiniband support.
+
+  Enable the appropriate IB HCA support or iWARP adapter support,
+  depending on your hardware.
+
+  If you are using InfiniBand, enable IP-over-InfiniBand support.
+
+  For soft RDMA, enable either the soft iWARP (`RDMA _SIW`) or soft RoCE
+  (`RDMA_RXE`) module. Install the `iproute2` package and use the
+  `rdma link add` command to load the module and create an
+  RDMA interface.
+
+  e.g. if your local ethernet interface is `eth0`, you can use:
+
+    .. code-block:: bash
+
+        sudo rdma link add siw0 type siw netdev eth0
+
+- Enable SMB Direct support for both the server and the client in the kernel
+  configuration.
+
+    Server Setup
+
+    .. code-block:: text
+
+        Network File Systems  --->
+            <M> SMB3 server support
+                [*] Support for SMB Direct protocol
+
+    Client Setup
+
+    .. code-block:: text
+
+        Network File Systems  --->
+            <M> SMB3 and CIFS support (advanced network filesystem)
+                [*] SMB Direct support
+
+- Build and install the kernel. SMB Direct support will be enabled in the
+  cifs.ko and ksmbd.ko modules.
+
+Setup and Usage
+================
+
+- Set up and start a KSMBD server as described in the `KSMBD documentation
+  <https://www.kernel.org/doc/Documentation/filesystems/smb/ksmbd.rst>`_.
+  Also add the "server multi channel support = yes" parameter to ksmbd.conf.
+
+- On the client, mount the share with `rdma` mount option to use SMB Direct
+  (specify a SMB version 3.0 or higher using `vers`).
+
+  For example:
+
+    .. code-block:: bash
+
+        mount -t cifs //server/share /mnt/point -o vers=3.1.1,rdma
+
+- To verify that the mount is using SMB Direct, you can check dmesg for the
+  following log line after mounting:
+
+    .. code-block:: text
+
+        CIFS: VFS: RDMA transport established
+
+  Or, verify `rdma` mount option for the share in `/proc/mounts`:
+
+    .. code-block:: bash
+
+        cat /proc/mounts | grep cifs
diff --git linux-libre-6.15-gnu/Documentation/filesystems/vfs.rst linux-libre-6.16-gnu/Documentation/filesystems/vfs.rst
index ae79c30b6c0c..fd32a9a17bfb 100644
--- linux-libre-6.15-gnu/Documentation/filesystems/vfs.rst
+++ linux-libre-6.16-gnu/Documentation/filesystems/vfs.rst
@@ -716,9 +716,8 @@ page lookup by address, and keeping track of pages tagged as Dirty or
 Writeback.
 
 The first can be used independently to the others.  The VM can try to
-either write dirty pages in order to clean them, or release clean pages
-in order to reuse them.  To do this it can call the ->writepage method
-on dirty pages, and ->release_folio on clean folios with the private
+release clean pages in order to reuse them.  To do this it can call
+->release_folio on clean folios with the private
 flag set.  Clean pages without PagePrivate and with no external references
 will be released without notice being given to the address_space.
 
@@ -731,8 +730,8 @@ maintains information about the PG_Dirty and PG_Writeback status of each
 page, so that pages with either of these flags can be found quickly.
 
 The Dirty tag is primarily used by mpage_writepages - the default
-->writepages method.  It uses the tag to find dirty pages to call
-->writepage on.  If mpage_writepages is not used (i.e. the address
+->writepages method.  It uses the tag to find dirty pages to
+write back.  If mpage_writepages is not used (i.e. the address
 provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost
 unused.  write_inode_now and sync_inode do use it (through
 __sync_single_inode) to check if ->writepages has been successful in
@@ -756,23 +755,23 @@ pages, however the address_space has finer control of write sizes.
 
 The read process essentially only requires 'read_folio'.  The write
 process is more complicated and uses write_begin/write_end or
-dirty_folio to write data into the address_space, and writepage and
+dirty_folio to write data into the address_space, and
 writepages to writeback data to storage.
 
 Adding and removing pages to/from an address_space is protected by the
 inode's i_mutex.
 
 When data is written to a page, the PG_Dirty flag should be set.  It
-typically remains set until writepage asks for it to be written.  This
+typically remains set until writepages asks for it to be written.  This
 should clear PG_Dirty and set PG_Writeback.  It can be actually written
 at any point after PG_Dirty is clear.  Once it is known to be safe,
 PG_Writeback is cleared.
 
 Writeback makes use of a writeback_control structure to direct the
-operations.  This gives the writepage and writepages operations some
+operations.  This gives the writepages operation some
 information about the nature of and reason for the writeback request,
 and the constraints under which it is being done.  It is also used to
-return information back to the caller about the result of a writepage or
+return information back to the caller about the result of a
 writepages request.
 
 
@@ -819,7 +818,6 @@ cache in your filesystem.  The following members are defined:
 .. code-block:: c
 
 	struct address_space_operations {
-		int (*writepage)(struct page *page, struct writeback_control *wbc);
 		int (*read_folio)(struct file *, struct folio *);
 		int (*writepages)(struct address_space *, struct writeback_control *);
 		bool (*dirty_folio)(struct address_space *, struct folio *);
@@ -848,25 +846,6 @@ cache in your filesystem.  The following members are defined:
 		int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter);
 	};
 
-``writepage``
-	called by the VM to write a dirty page to backing store.  This
-	may happen for data integrity reasons (i.e. 'sync'), or to free
-	up memory (flush).  The difference can be seen in
-	wbc->sync_mode.  The PG_Dirty flag has been cleared and
-	PageLocked is true.  writepage should start writeout, should set
-	PG_Writeback, and should make sure the page is unlocked, either
-	synchronously or asynchronously when the write operation
-	completes.
-
-	If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
-	try too hard if there are problems, and may choose to write out
-	other pages from the mapping if that is easier (e.g. due to
-	internal dependencies).  If it chooses not to start writeout, it
-	should return AOP_WRITEPAGE_ACTIVATE so that the VM will not
-	keep calling ->writepage on that page.
-
-	See the file "Locking" for more details.
-
 ``read_folio``
 	Called by the page cache to read a folio from the backing store.
 	The 'file' argument supplies authentication information to network
@@ -909,7 +888,7 @@ cache in your filesystem.  The following members are defined:
 	given and that many pages should be written if possible.  If no
 	->writepages is given, then mpage_writepages is used instead.
 	This will choose pages from the address space that are tagged as
-	DIRTY and will pass them to ->writepage.
+	DIRTY and will write them back.
 
 ``dirty_folio``
 	called by the VM to mark a folio as dirty.  This is particularly
@@ -1411,9 +1390,7 @@ defined:
 
 	If a vfsmount is returned, the caller will attempt to mount it
 	on the mountpoint and will remove the vfsmount from its
-	expiration list in the case of failure.  The vfsmount should be
-	returned with 2 refs on it to prevent automatic expiration - the
-	caller will clean up the additional ref.
+	expiration list in the case of failure.
 
 	This function is only used if DCACHE_NEED_AUTOMOUNT is set on
 	the dentry.  This is set by __d_instantiate() if S_AUTOMOUNT is
diff --git linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 8d8b53e96bcf..ccb4b153e6f2 100644
--- linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -12,11 +12,14 @@ ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
-A reference consist of the device object name followed by one or more
-hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
-data extension node which is referred to by the key shall lie directly under
-the parent object i.e. either the device object or another hierarchical data
-extension node.
+A reference to a _DSD hierarchical data node is a string consisting of a
+device object reference followed by a dot (".") and a relative path to a data
+node object. Do not use non-string references as this will produce a copy of
+the hierarchical data node, not a reference!
+
+The hierarchical data extension node which is referred to shall be located
+directly under its parent object i.e. either the device object or another
+hierarchical data extension node [dsd-guide].
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
 "@" character and the number of the node in hexadecimal notation (without pre-
@@ -33,11 +36,9 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property contains a
-device object reference to DEV0 and under that device object, a
-hierarchical data extension key "node@1" referring to the NOD1 object
-and lastly, a hierarchical data extension key "anothernode" referring to
-the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property contains a string
+reference to a hierarchical data extension node ANOD under DEV0 under the parent
+of DEV1. ANOD is also the final target node of the reference.
 ::
 
 	Device (DEV0)
@@ -76,10 +77,7 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () {
-			"reference", Package () {
-			    ^DEV0, "node@1", "anothernode"
-			}
+		    Package () { "reference", "^DEV0.ANOD" }
 		    },
 		}
 	    })
diff --git linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
index b9dbfc73ed25..d6ae5ffa748c 100644
--- linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -66,12 +66,9 @@ of that port shall be zero. Similarly, if a port may only have a single
 endpoint, the number of that endpoint shall be zero.
 
 The endpoint reference uses property extension with "remote-endpoint" property
-name followed by a reference in the same package. Such references consist of
-the remote device reference, the first package entry of the port data extension
-reference under the device and finally the first package entry of the endpoint
-data extension reference under the port. Individual references thus appear as::
+name followed by a string reference in the same package. [data-node-ref]::
 
-    Package() { device, "port@X", "endpoint@Y" }
+    "device.datanode"
 
 In the above example, "X" is the number of the port and "Y" is the number of
 the endpoint.
@@ -109,7 +106,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.ISP.EP40" },
 		}
 	    })
 	}
@@ -141,7 +138,7 @@ A simple example of this is show below::
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
 		    Package () { "reg", 0 },
-		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
+		    Package () { "remote-endpoint", "\\_SB.PCI0.I2C2.CAM0.EP00" },
 		}
 	    })
 	}
diff --git linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
index 93db592c93c7..a97cd07d49be 100644
--- linux-libre-6.15-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
+++ linux-libre-6.16-gnu/Documentation/firmware-guide/acpi/dsd/leds.rst
@@ -15,11 +15,6 @@ Referring to LEDs in Device tree is documented in [video-interfaces], in
 "flash-leds" property documentation. In short, LEDs are directly referred to by
 using phandles.
 
-While Device tree allows referring to any node in the tree [devicetree], in
-ACPI references are limited to device nodes only [acpi]. For this reason using
-the same mechanism on ACPI is not possible. A mechanism to refer to non-device
-ACPI nodes is documented in [data-node-ref].
-
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
 referring to the "reg" property of the relevant LED, is used to identify
@@ -74,7 +69,7 @@ omitted. ::
 			Package () {
 				Package () {
 					"flash-leds",
-					Package () { ^LED, "led@0", ^LED, "led@1" },
+					Package () { "^LED.LED0", "^LED.LED1" },
 				}
 			}
 		})
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/amd-hardware-list-info.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/amd-hardware-list-info.rst
new file mode 100644
index 000000000000..1786544fe7c1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/amd-hardware-list-info.rst
@@ -0,0 +1,23 @@
+=================================================
+ AMD Hardware Components Information per Product
+=================================================
+
+On this page, you can find the AMD product name and which component version is
+part of it.
+
+Accelerated Processing Units (APU) Info
+---------------------------------------
+
+.. csv-table::
+   :header-rows: 1
+   :widths: 3, 2, 2, 1, 1, 1, 1
+   :file: ./apu-asic-info-table.csv
+
+Discrete GPU Info
+-----------------
+
+.. csv-table::
+   :header-rows: 1
+   :widths: 3, 2, 2, 1, 1, 1
+   :file: ./dgpu-asic-info-table.csv
+
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/amdgpu-glossary.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/amdgpu-glossary.rst
index 1e9283e076ba..30812d9d53c6 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/amdgpu-glossary.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/amdgpu-glossary.rst
@@ -12,18 +12,39 @@ we have a dedicated glossary for Display Core at
       The number of CUs that are active on the system.  The number of active
       CUs may be less than SE * SH * CU depending on the board configuration.
 
+    BACO
+      Bus Alive, Chip Off
+
+    BOCO
+      Bus Off, Chip Off
+
     CE
       Constant Engine
 
+    CIK
+      Sea Islands
+
+    CB
+      Color Buffer
+
     CP
       Command Processor
 
     CPLIB
       Content Protection Library
 
+    CS
+      Command Submission
+
+    CSB
+      Clear State Indirect Buffer
+
     CU
       Compute Unit
 
+    DB
+      Depth Buffer
+
     DFS
       Digital Frequency Synthesizer
 
@@ -33,6 +54,9 @@ we have a dedicated glossary for Display Core at
     EOP
       End Of Pipe/Pipeline
 
+    FLR
+      Function Level Reset
+
     GART
       Graphics Address Remapping Table.  This is the name we use for the GPUVM
       page table used by the GPU kernel driver.  It remaps system resources
@@ -45,6 +69,12 @@ we have a dedicated glossary for Display Core at
     GC
       Graphics and Compute
 
+    GDS
+      Global Data Share
+
+    GE
+      Geometry Engine
+
     GMC
       Graphic Memory Controller
 
@@ -80,6 +110,9 @@ we have a dedicated glossary for Display Core at
     KCQ
       Kernel Compute Queue
 
+    KFD
+      Kernel Fusion Driver
+
     KGQ
       Kernel Graphics Queue
 
@@ -89,6 +122,9 @@ we have a dedicated glossary for Display Core at
     MC
       Memory Controller
 
+    MCBP
+      Mid Command Buffer Preemption
+
     ME
       MicroEngine (Graphics)
 
@@ -104,6 +140,9 @@ we have a dedicated glossary for Display Core at
     MQD
       Memory Queue Descriptor
 
+    PA
+      Primitive Assembler / Physical Address
+
     PFP
       Pre-Fetch Parser (Graphics)
 
@@ -113,24 +152,39 @@ we have a dedicated glossary for Display Core at
     PSP
         Platform Security Processor
 
+    RB
+      Render Backends. Some people called it ROPs.
+
     RLC
       RunList Controller. This name is a remnant of past ages and doesn't have
       much meaning today. It's a group of general-purpose helper engines for
       the GFX block. It's involved in GFX power management and SR-IOV, among
       other things.
 
+    SC
+      Scan Converter
+
     SDMA
       System DMA
 
     SE
       Shader Engine
 
+    SGPR
+      Scalar General-Purpose Registers
+
     SH
       SHader array
 
+    SI
+      Southern Islands
+
     SMU/SMC
       System Management Unit / System Management Controller
 
+    SPI (AMDGPU)
+      Shader Processor Input
+
     SRLC
       Save/Restore List Control
 
@@ -143,12 +197,21 @@ we have a dedicated glossary for Display Core at
     SS
       Spread Spectrum
 
+    SX
+      Shader Export
+
     TA
       Trusted Application
 
+    TC
+      Texture Cache
+
     TOC
       Table of Contents
 
+    UMSCH
+      User Mode Scheduler
+
     UVD
       Unified Video Decoder
 
@@ -158,5 +221,17 @@ we have a dedicated glossary for Display Core at
     VCN
       Video Codec Next
 
+    VGPR
+      Vector General-Purpose Registers
+
+    VMID
+      Virtual Memory ID
+
     VPE
       Video Processing Engine
+
+    XCC
+      Accelerator Core Complex
+
+    XCP
+      Accelerator Core Partition
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv linux-libre-6.16-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
index 5dd4b8762d19..1d50b539677f 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/apu-asic-info-table.csv
@@ -13,3 +13,5 @@ Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8
 Ryzen 7x40 series, Phoenix, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
 Ryzen 8x40 series, Hawk Point, 3.1.4, 11.0.1 / 11.0.4, 4.0.2, 6.0.1, 13.0.4 / 13.0.11
 Ryzen AI 300 series, Strix Point, 3.5.0, 11.5.0, 4.0.5, 6.1.0, 14.0.0
+Ryzen AI 350 series, Krackan Point, 3.5.0, 11.5.2, 4.0.5, 6.1.2, 14.0.4
+Ryzen AI Max 300 series, Strix Halo, 3.5.1, 11.5.1, 4.0.6, 6.1.1, 14.0.1
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/debugfs.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/debugfs.rst
new file mode 100644
index 000000000000..5150d0a95658
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/debugfs.rst
@@ -0,0 +1,210 @@
+==============
+AMDGPU DebugFS
+==============
+
+The amdgpu driver provides a number of debugfs files to aid in debugging
+issues in the driver.  These are usually found in
+/sys/kernel/debug/dri/<num>.
+
+DebugFS Files
+=============
+
+amdgpu_benchmark
+----------------
+
+Run benchmarks using the DMA engine the driver uses for GPU memory paging.
+Write a number to the file to run the test.  The results are written to the
+kernel log.  VRAM is on device memory (dGPUs) or carve out (APUs) and GTT
+(Graphics Translation Tables) is system memory that is accessible by the GPU.
+The following tests are available:
+
+- 1: simple test, VRAM to GTT and GTT to VRAM
+- 2: simple test, VRAM to VRAM
+- 3: GTT to VRAM, buffer size sweep, powers of 2
+- 4: VRAM to GTT, buffer size sweep, powers of 2
+- 5: VRAM to VRAM, buffer size sweep, powers of 2
+- 6: GTT to VRAM, buffer size sweep, common display sizes
+- 7: VRAM to GTT, buffer size sweep, common display sizes
+- 8: VRAM to VRAM, buffer size sweep, common display sizes
+
+amdgpu_test_ib
+--------------
+
+Read this file to run simple IB (Indirect Buffer) tests on all kernel managed
+rings.  IBs are command buffers usually generated by userspace applications
+which are submitted to the kernel for execution on an particular GPU engine.
+This just runs the simple IB tests included in the kernel.  These tests
+are engine specific and verify that IB submission works.
+
+amdgpu_discovery
+----------------
+
+Provides raw access to the IP discovery binary provided by the GPU.  Read this
+file to access the raw binary.  This is useful for verifying the contents of
+the IP discovery table.  It is chip specific.
+
+amdgpu_vbios
+------------
+
+Provides raw access to the ROM binary image from the GPU.  Read this file to
+access the raw binary.  This is useful for verifying the contents of the
+video BIOS ROM.  It is board specific.
+
+amdgpu_evict_gtt
+----------------
+
+Evict all buffers from the GTT memory pool.  Read this file to evict all
+buffers from this pool.
+
+amdgpu_evict_vram
+-----------------
+
+Evict all buffers from the VRAM memory pool.  Read this file to evict all
+buffers from this pool.
+
+amdgpu_gpu_recover
+------------------
+
+Trigger a GPU reset.  Read this file to trigger reset the entire GPU.
+All work currently running  on the GPU will be lost.
+
+amdgpu_ring_<name>
+------------------
+
+Provides read access to the kernel managed ring buffers for each ring <name>.
+These are useful for debugging problems on a particular ring.  The ring buffer
+is how the CPU sends commands to the GPU.  The CPU writes commands into the
+buffer and then asks the GPU engine to process it.  This is the raw binary
+contents of the ring buffer.  Use a tool like UMR to decode the rings into human
+readable form.
+
+amdgpu_mqd_<name>
+-----------------
+
+Provides read access to the kernel managed MQD (Memory Queue Descriptor) for
+ring <name> managed by the kernel driver.  MQDs define the features of the ring
+and are used to store the ring's state when it is not connected to hardware.
+The driver writes the requested ring features and metadata (GPU addresses of
+the ring itself and associated buffers) to the MQD and the firmware uses the MQD
+to populate the hardware when the ring is mapped to a hardware slot.  Only
+available on engines which use MQDs.  This provides access to the raw MQD
+binary.
+
+amdgpu_error_<name>
+-------------------
+
+Provides an interface to set an error code on the dma fences associated with
+ring <name>.  The error code specified is propogated to all fences associated
+with the ring.  Use this to inject a fence error into a ring.
+
+amdgpu_pm_info
+--------------
+
+Provides human readable information about the power management features
+and state of the GPU.  This includes current GFX clock, Memory clock,
+voltages, average SoC power, temperature, GFX load, Memory load, SMU
+feature mask, VCN power state, clock and power gating features.
+
+amdgpu_firmware_info
+--------------------
+
+Lists the firmware versions for all firmwares used by the GPU.  Only
+entries with a non-0 version are valid.  If the version is 0, the firmware
+is not valid for the GPU.
+
+amdgpu_fence_info
+-----------------
+
+Shows the last signalled and emitted fence sequence numbers for each
+kernel driver managed ring.  Fences are associated with submissions
+to the engine.  Emitted fences have been submitted to the ring
+and signalled fences have been signalled by the GPU.  Rings with a
+larger emitted fence value have outstanding work that is still being
+processed by the engine that owns that ring.  When the emitted and
+signalled fence values are equal, the ring is idle.
+
+amdgpu_gem_info
+---------------
+
+Lists all of the PIDs using the GPU and the GPU buffers that they have
+allocated.  This lists the buffer size, pool (VRAM, GTT, etc.), and buffer
+attributes (CPU access required, CPU cache attributes, etc.).
+
+amdgpu_vm_info
+--------------
+
+Lists all of the PIDs using the GPU and the GPU buffers that they have
+allocated as well as the status of those buffers relative to that process'
+GPU virtual address space (e.g., evicted, idle, invalidated, etc.).
+
+amdgpu_sa_info
+--------------
+
+Prints out all of the suballocations (sa) by the suballocation manager in the
+kernel driver.  Prints the GPU address, size, and fence info associated
+with each suballocation.  The suballocations are used internally within
+the kernel driver for various things.
+
+amdgpu_<pool>_mm
+----------------
+
+Prints TTM information about the memory pool <pool>.
+
+amdgpu_vram
+-----------
+
+Provides direct access to VRAM.  Used by tools like UMR to inspect
+objects in VRAM.
+
+amdgpu_iomem
+------------
+
+Provides direct access to GTT memory.  Used by tools like UMR to inspect
+GTT memory.
+
+amdgpu_regs_*
+-------------
+
+Provides direct access to various register aperatures on the GPU.  Used
+by tools like UMR to access GPU registers.
+
+amdgpu_regs2
+------------
+
+Provides an IOCTL interface used by UMR for interacting with GPU registers.
+
+
+amdgpu_sensors
+--------------
+
+Provides an interface to query GPU power metrics (temperature, average
+power, etc.).  Used by tools like UMR to query GPU power metrics.
+
+
+amdgpu_gca_config
+-----------------
+
+Provides an interface to query GPU details (Graphics/Compute Array config,
+PCI config, GPU family, etc.).  Used by tools like UMR to query GPU details.
+
+amdgpu_wave
+-----------
+
+Used to query GFX/compute wave information from the hardware.  Used by tools
+like UMR to query GFX/compute wave information.
+
+amdgpu_gpr
+----------
+
+Used to query GFX/compute GPR (General Purpose Register) information from the
+hardware.  Used by tools like UMR to query GPRs when debugging shaders.
+
+amdgpu_gprwave
+--------------
+
+Provides an IOCTL interface used by UMR for interacting with shader waves.
+
+amdgpu_fw_attestation
+---------------------
+
+Provides an interface for reading back firmware attestation records.
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/debugging.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/debugging.rst
index e75f97d0e4ea..7cbfea0606e1 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/debugging.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/debugging.rst
@@ -2,6 +2,13 @@
  GPU Debugging
 ===============
 
+General Debugging Options
+=========================
+
+The DebugFS section provides documentation on a number files to aid in debugging
+issues on the GPU.
+
+
 GPUVM Debugging
 ===============
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
index 013f63b271f3..605dca21f4ae 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/display/dc-debug.rst
@@ -154,7 +154,7 @@ of the display parameters, but the userspace might also cause this issue. One
 way to identify the source of the problem is to take a screenshot or make a
 desktop video capture when the problem happens; after checking the
 screenshot/video recording, if you don't see any of the artifacts, it means
-that the issue is likely on the the driver side. If you can still see the
+that the issue is likely on the driver side. If you can still see the
 problem in the data collected, it is an issue that probably happened during
 rendering, and the display code just got the framebuffer already corrupted.
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/driver-core.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/driver-core.rst
index 32723a925377..81256318e93c 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/driver-core.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/driver-core.rst
@@ -67,36 +67,66 @@ GC (Graphics and Compute)
     This is the graphics and compute engine, i.e., the block that
     encompasses the 3D pipeline and and shader blocks.  This is by far the
     largest block on the GPU.  The 3D pipeline has tons of sub-blocks.  In
-    addition to that, it also contains the CP microcontrollers (ME, PFP,
-    CE, MEC) and the RLC microcontroller.  It's exposed to userspace for
-    user mode drivers (OpenGL, Vulkan, OpenCL, etc.)
+    addition to that, it also contains the CP microcontrollers (ME, PFP, CE,
+    MEC) and the RLC microcontroller.  It's exposed to userspace for user mode
+    drivers (OpenGL, Vulkan, OpenCL, etc.). More details in :ref:`Graphics (GFX)
+    and Compute <amdgpu-gc>`.
 
 VCN (Video Core Next)
     This is the multi-media engine.  It handles video and image encode and
     decode.  It's exposed to userspace for user mode drivers (VA-API,
     OpenMAX, etc.)
 
-Graphics and Compute Microcontrollers
--------------------------------------
-
-CP (Command Processor)
-    The name for the hardware block that encompasses the front end of the
-    GFX/Compute pipeline.  Consists mainly of a bunch of microcontrollers
-    (PFP, ME, CE, MEC).  The firmware that runs on these microcontrollers
-    provides the driver interface to interact with the GFX/Compute engine.
-
-    MEC (MicroEngine Compute)
-        This is the microcontroller that controls the compute queues on the
-        GFX/compute engine.
-
-    MES (MicroEngine Scheduler)
-        This is a new engine for managing queues.  This is currently unused.
-
-RLC (RunList Controller)
-    This is another microcontroller in the GFX/Compute engine.  It handles
-    power management related functionality within the GFX/Compute engine.
-    The name is a vestige of old hardware where it was originally added
-    and doesn't really have much relation to what the engine does now.
+.. _pipes-and-queues-description:
+
+GFX, Compute, and SDMA Overall Behavior
+=======================================
+
+.. note:: For simplicity, whenever the term block is used in this section, it
+   means GFX, Compute, and SDMA.
+
+GFX, Compute and SDMA share a similar form of operation that can be abstracted
+to facilitate understanding of the behavior of these blocks. See the figure
+below illustrating the common components of these blocks:
+
+.. kernel-figure:: pipe_and_queue_abstraction.svg
+
+In the central part of this figure, you can see two hardware elements, one called
+**Pipes** and another called **Queues**; it is important to highlight that Queues
+must be associated with a Pipe and vice-versa. Every specific hardware IP may have
+a different number of Pipes and, in turn, a different number of Queues; for
+example, GFX 11 has two Pipes and two Queues per Pipe for the GFX front end.
+
+Pipe is the hardware that processes the instructions available in the Queues;
+in other words, it is a thread executing the operations inserted in the Queue.
+One crucial characteristic of Pipes is that they can only execute one Queue at
+a time; no matter if the hardware has multiple Queues in the Pipe, it only runs
+one Queue per Pipe.
+
+Pipes have the mechanics of swapping between queues at the hardware level.
+Nonetheless, they only make use of Queues that are considered mapped. Pipes can
+switch between queues based on any of the following inputs:
+
+1. Command Stream;
+2. Packet by Packet;
+3. Other hardware requests the change (e.g., MES).
+
+Queues within Pipes are defined by the Hardware Queue Descriptors (HQD).
+Associated with the HQD concept, we have the Memory Queue Descriptor (MQD),
+which is responsible for storing information about the state of each of the
+available Queues in the memory. The state of a Queue contains information such
+as the GPU virtual address of the queue itself, save areas, doorbell, etc. The
+MQD also stores the HQD registers, which are vital for activating or
+deactivating a given Queue.  The scheduling firmware (e.g., MES) is responsible
+for loading HQDs from MQDs and vice versa.
+
+The Queue-switching process can also happen with the firmware requesting the
+preemption or unmapping of a Queue. The firmware waits for the HQD_ACTIVE bit
+to change to low before saving the state into the MQD. To make a different
+Queue become active, the firmware copies the MQD state into the HQD registers
+and loads any additional state. Finally, it sets the HQD_ACTIVE bit to high to
+indicate that the queue is active.  The Pipe will then execute work from active
+Queues.
 
 Driver Structure
 ================
@@ -110,7 +140,8 @@ Some useful constructs:
 KIQ (Kernel Interface Queue)
     This is a control queue used by the kernel driver to manage other gfx
     and compute queues on the GFX/compute engine.  You can use it to
-    map/unmap additional queues, etc.
+    map/unmap additional queues, etc.  This is replaced by MES on
+    GFX 11 and newer hardware.
 
 IB (Indirect Buffer)
     A command buffer for a particular engine.  Rather than writing
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/driver-misc.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/driver-misc.rst
index e40e15f89fd3..25b0c857816e 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/driver-misc.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/driver-misc.rst
@@ -50,23 +50,6 @@ board_info
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
    :doc: board_info
 
-Accelerated Processing Units (APU) Info
----------------------------------------
-
-.. csv-table::
-   :header-rows: 1
-   :widths: 3, 2, 2, 1, 1, 1, 1
-   :file: ./apu-asic-info-table.csv
-
-Discrete GPU Info
------------------
-
-.. csv-table::
-   :header-rows: 1
-   :widths: 3, 2, 2, 1, 1, 1
-   :file: ./dgpu-asic-info-table.csv
-
-
 GPU Memory Usage Information
 ============================
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/gc/index.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/gc/index.rst
new file mode 100644
index 000000000000..ff6e9ef5cbee
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/gc/index.rst
@@ -0,0 +1,52 @@
+.. _amdgpu-gc:
+
+========================================
+ drm/amdgpu - Graphics and Compute (GC)
+========================================
+
+The relationship between the CPU and GPU can be described as the
+producer-consumer problem, where the CPU fills out a buffer with operations
+(producer) to be executed by the GPU (consumer). The requested operations in
+the buffer are called Command Packets, which can be summarized as a compressed
+way of transmitting command information to the graphics controller.
+
+The component that acts as the front end between the CPU and the GPU is called
+the Command Processor (CP). This component is responsible for providing greater
+flexibility to the GC since CP makes it possible to program various aspects of
+the GPU pipeline. CP also coordinates the communication between the CPU and GPU
+via a mechanism named **Ring Buffers**, where the CPU appends information to
+the buffer while the GPU removes operations. It is relevant to highlight that a
+CPU can add a pointer to the Ring Buffer that points to another region of
+memory outside the Ring Buffer, and CP can handle it; this mechanism is called
+**Indirect Buffer (IB)**. CP receives and parses the Command Streams (CS), and
+writes the operations to the correct hardware blocks.
+
+Graphics (GFX) and Compute Microcontrollers
+-------------------------------------------
+
+GC is a large block, and as a result, it has multiple firmware associated with
+it. Some of them are:
+
+CP (Command Processor)
+    The name for the hardware block that encompasses the front end of the
+    GFX/Compute pipeline. Consists mainly of a bunch of microcontrollers
+    (PFP, ME, CE, MEC). The firmware that runs on these microcontrollers
+    provides the driver interface to interact with the GFX/Compute engine.
+
+    MEC (MicroEngine Compute)
+        This is the microcontroller that controls the compute queues on the
+        GFX/compute engine.
+
+    MES (MicroEngine Scheduler)
+        This is the engine for managing queues. For more details check
+        :ref:`MicroEngine Scheduler (MES) <amdgpu-mes>`.
+
+RLC (RunList Controller)
+    This is another microcontroller in the GFX/Compute engine. It handles
+    power management related functionality within the GFX/Compute engine.
+    The name is a vestige of old hardware where it was originally added
+    and doesn't really have much relation to what the engine does now.
+
+.. toctree::
+
+   mes.rst
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/gc/mes.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/gc/mes.rst
new file mode 100644
index 000000000000..b99eb211b179
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/gc/mes.rst
@@ -0,0 +1,38 @@
+.. _amdgpu-mes:
+
+=============================
+ MicroEngine Scheduler (MES)
+=============================
+
+.. note::
+   Queue and ring buffer are used as a synonymous.
+
+.. note::
+   This section assumes that you are familiar with the concept of Pipes, Queues, and GC.
+   If not, check :ref:`GFX, Compute, and SDMA Overall Behavior<pipes-and-queues-description>`
+   and :ref:`drm/amdgpu - Graphics and Compute (GC) <amdgpu-gc>`.
+
+Every GFX has a pipe component with one or more hardware queues. Pipes can
+switch between queues depending on certain conditions, and one of the
+components that can request a queue switch to a pipe is the MicroEngine
+Scheduler (MES). Whenever the driver is initialized, it creates one MQD per
+hardware queue, and then the MQDs are handed to the MES firmware for mapping
+to:
+
+1. Kernel Queues (legacy): This queue is statically mapped to HQDs and never
+   preempted. Even though this is a legacy feature, it is the current default, and
+   most existing hardware supports it. When an application submits work to the
+   kernel driver, it submits all of the application command buffers to the kernel
+   queues. The CS IOCTL takes the command buffer from the applications and
+   schedules them on the kernel queue.
+
+2. User Queues: These queues are dynamically mapped to the HQDs. Regarding the
+   utilization of User Queues, the userspace application will create its user
+   queues and submit work directly to its user queues with no need to IOCTL for
+   each submission and no need to share a single kernel queue.
+
+In terms of User Queues, MES can dynamically map them to the HQD. If there are
+more MQDs than HQDs, the MES firmware will preempt other user queues to make
+sure each queues get a time slice; in other words, MES is a microcontroller
+that handles the mapping and unmapping of MQDs into HQDs, as well as the
+priorities and oversubscription of MQDs.
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/index.rst linux-libre-6.16-gnu/Documentation/gpu/amdgpu/index.rst
index 302d039928ee..bb2894b5edaf 100644
--- linux-libre-6.15-gnu/Documentation/gpu/amdgpu/index.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/index.rst
@@ -7,8 +7,10 @@ Next (GCN), Radeon DNA (RDNA), and Compute DNA (CDNA) architectures.
 
 .. toctree::
 
-   module-parameters
    driver-core
+   amd-hardware-list-info
+   module-parameters
+   gc/index
    display/index
    flashing
    xgmi
@@ -16,5 +18,6 @@ Next (GCN), Radeon DNA (RDNA), and Compute DNA (CDNA) architectures.
    thermal
    driver-misc
    debugging
+   debugfs
    process-isolation
    amdgpu-glossary
diff --git linux-libre-6.15-gnu/Documentation/gpu/amdgpu/pipe_and_queue_abstraction.svg linux-libre-6.16-gnu/Documentation/gpu/amdgpu/pipe_and_queue_abstraction.svg
new file mode 100644
index 000000000000..0df3c6b3000b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/amdgpu/pipe_and_queue_abstraction.svg
@@ -0,0 +1,1279 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   width="395.47891mm"
+   height="234.73715mm"
+   viewBox="0 0 395.47891 234.73714"
+   version="1.1"
+   id="svg1"
+   inkscape:version="1.4 (e7c3feb100, 2024-10-09)"
+   sodipodi:docname="pipe_and_queue_abstraction.svg"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <sodipodi:namedview
+     id="namedview1"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:document-units="mm"
+     inkscape:zoom="1.6489689"
+     inkscape:cx="713.17296"
+     inkscape:cy="466.65527"
+     inkscape:window-width="3840"
+     inkscape:window-height="2083"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="layer1" />
+  <defs
+     id="defs1">
+    <marker
+       style="overflow:visible"
+       id="Dot"
+       refX="0"
+       refY="0"
+       orient="auto"
+       inkscape:stockid="Dot"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         transform="scale(0.5)"
+         style="fill:context-stroke;fill-rule:evenodd;stroke:none"
+         d="M 5,0 C 5,2.76 2.76,5 0,5 -2.76,5 -5,2.76 -5,0 c 0,-2.76 2.3,-5 5,-5 2.76,0 5,2.24 5,5 z"
+         sodipodi:nodetypes="sssss"
+         id="path110" />
+    </marker>
+    <marker
+       style="overflow:visible"
+       id="marker109"
+       refX="0"
+       refY="0"
+       orient="auto-start-reverse"
+       inkscape:stockid="Stylized triangle arrow"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         transform="scale(0.5)"
+         style="fill:context-stroke;fill-rule:evenodd;stroke:context-stroke;stroke-width:1pt"
+         d="m 6,0 c -3,1 -7,3 -9,5 0,0 0,-4 2,-5 -2,-1 -2,-5 -2,-5 2,2 6,4 9,5 z"
+         id="path109" />
+    </marker>
+    <marker
+       style="overflow:visible"
+       id="ArrowTriangleStylized"
+       refX="0"
+       refY="0"
+       orient="auto-start-reverse"
+       inkscape:stockid="Stylized triangle arrow"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         transform="scale(0.5)"
+         style="fill:context-stroke;fill-rule:evenodd;stroke:context-stroke;stroke-width:1pt"
+         d="m 6,0 c -3,1 -7,3 -9,5 0,0 0,-4 2,-5 -2,-1 -2,-5 -2,-5 2,2 6,4 9,5 z"
+         id="path108" />
+    </marker>
+    <marker
+       style="overflow:visible"
+       id="ArrowWide"
+       refX="0"
+       refY="0"
+       orient="auto-start-reverse"
+       inkscape:stockid="Wide arrow"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         style="fill:none;stroke:context-stroke;stroke-width:1;stroke-linecap:butt"
+         d="M 3,-3 0,0 3,3"
+         transform="rotate(180,0.125,0)"
+         sodipodi:nodetypes="ccc"
+         id="path1" />
+    </marker>
+    <marker
+       style="overflow:visible"
+       id="Triangle"
+       refX="0"
+       refY="0"
+       orient="auto-start-reverse"
+       inkscape:stockid="Triangle arrow"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         transform="scale(0.5)"
+         style="fill:context-stroke;fill-rule:evenodd;stroke:context-stroke;stroke-width:1pt"
+         d="M 5.77,0 -2.88,5 V -5 Z"
+         id="path135" />
+    </marker>
+    <marker
+       style="overflow:visible"
+       id="ArrowWideHeavy"
+       refX="0"
+       refY="0"
+       orient="auto-start-reverse"
+       inkscape:stockid="Wide, heavy arrow"
+       markerWidth="1"
+       markerHeight="1"
+       viewBox="0 0 1 1"
+       inkscape:isstock="true"
+       inkscape:collect="always"
+       preserveAspectRatio="xMidYMid">
+      <path
+         style="fill:context-stroke;fill-rule:evenodd;stroke:none"
+         d="m 1,0 -3,3 h -2 l 3,-3 -3,-3 h 2 z"
+         id="path71" />
+    </marker>
+  </defs>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(149.03517,55.110629)">
+    <circle
+       style="fill:#ffeeaa;fill-opacity:1;stroke:#1a1a1a;stroke-width:0.733436;stroke-dasharray:none;stroke-dashoffset:0"
+       id="path98"
+       cx="-35.757576"
+       cy="-10.495151"
+       r="44.24876" />
+    <rect
+       style="fill:none;stroke:#000000;stroke-width:0.878057;stroke-dasharray:none"
+       id="rect1"
+       width="167.79619"
+       height="24.831829"
+       x="14.21942"
+       y="57.862854" />
+    <g
+       id="g11"
+       transform="translate(24.021362,-46.545299)">
+      <rect
+         style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+         id="rect2"
+         width="131.09708"
+         height="5.8163381"
+         x="23.245802"
+         y="107.16314" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 37.884707,107.26337 v 5.53565"
+         id="path2"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 52.466233,107.26337 v 5.53565"
+         id="path3"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 67.047758,107.26337 v 5.53565"
+         id="path4"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 81.629283,107.26337 v 5.53565"
+         id="path5"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 96.210809,107.26337 v 5.53565"
+         id="path6"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 110.79233,107.26337 v 5.53565"
+         id="path7"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 125.37386,107.26337 v 5.53565"
+         id="path8"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 139.95538,107.26337 v 5.53565"
+         id="path9"
+         sodipodi:nodetypes="cc" />
+      <text
+         xml:space="preserve"
+         style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         x="86.713425"
+         y="110.1963"
+         id="text11"><tspan
+           sodipodi:role="line"
+           id="tspan11"
+           style="stroke:#006680;stroke-width:0.5"
+           x="86.713425"
+           y="110.1963">. . .</tspan></text>
+    </g>
+    <g
+       id="g18"
+       transform="translate(24.021362,-32.25779)">
+      <rect
+         style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+         id="rect11"
+         width="131.09708"
+         height="5.8163381"
+         x="23.245802"
+         y="107.16314" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 37.884707,107.26337 v 5.53565"
+         id="path11"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 52.466233,107.26337 v 5.53565"
+         id="path12"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 67.047758,107.26337 v 5.53565"
+         id="path13"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 81.629283,107.26337 v 5.53565"
+         id="path14"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 96.210809,107.26337 v 5.53565"
+         id="path15"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 110.79233,107.26337 v 5.53565"
+         id="path16"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 125.37386,107.26337 v 5.53565"
+         id="path17"
+         sodipodi:nodetypes="cc" />
+      <path
+         style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         d="m 139.95538,107.26337 v 5.53565"
+         id="path18"
+         sodipodi:nodetypes="cc" />
+      <text
+         xml:space="preserve"
+         style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         x="86.713425"
+         y="110.1963"
+         id="text18"><tspan
+           sodipodi:role="line"
+           id="tspan18"
+           style="stroke:#006680;stroke-width:0.5"
+           x="86.713425"
+           y="110.1963">. . .</tspan></text>
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+       x="113.37768"
+       y="68.463142"
+       id="text19"><tspan
+         sodipodi:role="line"
+         id="tspan19"
+         style="writing-mode:tb-rl;stroke-width:0.5"
+         x="113.37768"
+         y="68.463142">. . .</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="25.005701"
+       y="55.308445"
+       id="text844-2-9"><tspan
+         sodipodi:role="line"
+         x="25.005701"
+         y="55.308445"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan2868">Pipe[0]</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="63.075123"
+       id="text844-2-9-4"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="63.075123"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan2868-7">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="30.264952"
+       y="65.490654"
+       id="text20"><tspan
+         sodipodi:role="line"
+         x="30.264952"
+         y="65.490654"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan20">Queue[0]</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="30.264952"
+       y="79.249001"
+       id="text21"><tspan
+         sodipodi:role="line"
+         x="30.264952"
+         y="79.249001"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan21">Queue[n]</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="30.264952"
+       y="71.84066"
+       id="text22"><tspan
+         sodipodi:role="line"
+         x="30.264952"
+         y="71.84066"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan22">...</tspan></text>
+    <g
+       id="g71"
+       transform="translate(-23.283342)">
+      <rect
+         style="fill:#ffffff;fill-opacity:0;stroke:#000000;stroke-width:0.5;stroke-dasharray:0.5, 0.5;stroke-dashoffset:0"
+         id="rect67"
+         width="18.533583"
+         height="114.96632"
+         x="250.9435"
+         y="54.754276"
+         ry="6.0427966" />
+    </g>
+    <rect
+       style="fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:0.499999;stroke-dasharray:none;stroke-dashoffset:0"
+       id="rect68"
+       width="188.21231"
+       height="139.5948"
+       x="4.0113592"
+       y="37.597778"
+       ry="0" />
+    <g
+       id="g43"
+       transform="translate(0,40.745853)">
+      <rect
+         style="fill:none;stroke:#000000;stroke-width:0.878057;stroke-dasharray:none"
+         id="rect22"
+         width="167.79619"
+         height="24.831829"
+         x="14.21942"
+         y="57.862854" />
+      <g
+         id="g30"
+         transform="translate(24.021362,-46.545299)">
+        <rect
+           style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+           id="rect23"
+           width="131.09708"
+           height="5.8163381"
+           x="23.245802"
+           y="107.16314" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 37.884707,107.26337 v 5.53565"
+           id="path23"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 52.466233,107.26337 v 5.53565"
+           id="path24"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 67.047758,107.26337 v 5.53565"
+           id="path25"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 81.629283,107.26337 v 5.53565"
+           id="path26"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 96.210809,107.26337 v 5.53565"
+           id="path27"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 110.79233,107.26337 v 5.53565"
+           id="path28"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 125.37386,107.26337 v 5.53565"
+           id="path29"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 139.95538,107.26337 v 5.53565"
+           id="path30"
+           sodipodi:nodetypes="cc" />
+        <text
+           xml:space="preserve"
+           style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           x="86.713425"
+           y="110.1963"
+           id="text30"><tspan
+             sodipodi:role="line"
+             id="tspan30"
+             style="stroke:#006680;stroke-width:0.5"
+             x="86.713425"
+             y="110.1963">. . .</tspan></text>
+      </g>
+      <g
+         id="g38"
+         transform="translate(24.021362,-32.25779)">
+        <rect
+           style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+           id="rect30"
+           width="131.09708"
+           height="5.8163381"
+           x="23.245802"
+           y="107.16314" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 37.884707,107.26337 v 5.53565"
+           id="path31"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 52.466233,107.26337 v 5.53565"
+           id="path32"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 67.047758,107.26337 v 5.53565"
+           id="path33"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 81.629283,107.26337 v 5.53565"
+           id="path34"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 96.210809,107.26337 v 5.53565"
+           id="path35"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 110.79233,107.26337 v 5.53565"
+           id="path36"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 125.37386,107.26337 v 5.53565"
+           id="path37"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 139.95538,107.26337 v 5.53565"
+           id="path38"
+           sodipodi:nodetypes="cc" />
+        <text
+           xml:space="preserve"
+           style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           x="86.713425"
+           y="110.1963"
+           id="text38"><tspan
+             sodipodi:role="line"
+             id="tspan38"
+             style="stroke:#006680;stroke-width:0.5"
+             x="86.713425"
+             y="110.1963">. . .</tspan></text>
+      </g>
+      <text
+         xml:space="preserve"
+         style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         x="113.37768"
+         y="68.463142"
+         id="text39"><tspan
+           sodipodi:role="line"
+           id="tspan39"
+           style="writing-mode:tb-rl;stroke-width:0.5"
+           x="113.37768"
+           y="68.463142">. . .</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="25.005701"
+         y="55.308445"
+         id="text40"><tspan
+           sodipodi:role="line"
+           x="25.005701"
+           y="55.308445"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan40">Pipe[1]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="65.490654"
+         id="text41"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="65.490654"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan41">Queue[0]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="79.249001"
+         id="text42"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="79.249001"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan42">Queue[n]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="71.84066"
+         id="text43"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="71.84066"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan43">...</tspan></text>
+    </g>
+    <g
+       id="g64"
+       transform="translate(0,85.195881)">
+      <rect
+         style="fill:none;stroke:#000000;stroke-width:0.878057;stroke-dasharray:none"
+         id="rect43"
+         width="167.79619"
+         height="24.831829"
+         x="14.21942"
+         y="57.862854" />
+      <g
+         id="g51"
+         transform="translate(24.021362,-46.545299)">
+        <rect
+           style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+           id="rect44"
+           width="131.09708"
+           height="5.8163381"
+           x="23.245802"
+           y="107.16314" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 37.884707,107.26337 v 5.53565"
+           id="path44"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 52.466233,107.26337 v 5.53565"
+           id="path45"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 67.047758,107.26337 v 5.53565"
+           id="path46"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 81.629283,107.26337 v 5.53565"
+           id="path47"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 96.210809,107.26337 v 5.53565"
+           id="path48"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 110.79233,107.26337 v 5.53565"
+           id="path49"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 125.37386,107.26337 v 5.53565"
+           id="path50"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 139.95538,107.26337 v 5.53565"
+           id="path51"
+           sodipodi:nodetypes="cc" />
+        <text
+           xml:space="preserve"
+           style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           x="86.713425"
+           y="110.1963"
+           id="text51"><tspan
+             sodipodi:role="line"
+             id="tspan51"
+             style="stroke:#006680;stroke-width:0.5"
+             x="86.713425"
+             y="110.1963">. . .</tspan></text>
+      </g>
+      <g
+         id="g59"
+         transform="translate(24.021362,-32.25779)">
+        <rect
+           style="fill:none;stroke:#006680;stroke-width:0.459999;stroke-dasharray:none"
+           id="rect51"
+           width="131.09708"
+           height="5.8163381"
+           x="23.245802"
+           y="107.16314" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 37.884707,107.26337 v 5.53565"
+           id="path52"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 52.466233,107.26337 v 5.53565"
+           id="path53"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 67.047758,107.26337 v 5.53565"
+           id="path54"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 81.629283,107.26337 v 5.53565"
+           id="path55"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 96.210809,107.26337 v 5.53565"
+           id="path56"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 110.79233,107.26337 v 5.53565"
+           id="path57"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 125.37386,107.26337 v 5.53565"
+           id="path58"
+           sodipodi:nodetypes="cc" />
+        <path
+           style="fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           d="m 139.95538,107.26337 v 5.53565"
+           id="path59"
+           sodipodi:nodetypes="cc" />
+        <text
+           xml:space="preserve"
+           style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+           x="86.713425"
+           y="110.1963"
+           id="text59"><tspan
+             sodipodi:role="line"
+             id="tspan59"
+             style="stroke:#006680;stroke-width:0.5"
+             x="86.713425"
+             y="110.1963">. . .</tspan></text>
+      </g>
+      <text
+         xml:space="preserve"
+         style="font-size:3.175px;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:none;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+         x="113.37768"
+         y="68.463142"
+         id="text60"><tspan
+           sodipodi:role="line"
+           id="tspan60"
+           style="writing-mode:tb-rl;stroke-width:0.5"
+           x="113.37768"
+           y="68.463142">. . .</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="25.005701"
+         y="55.308445"
+         id="text61"><tspan
+           sodipodi:role="line"
+           x="25.005701"
+           y="55.308445"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan61">Pipe[n]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="65.490654"
+         id="text62"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="65.490654"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan62">Queue[0]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="79.249001"
+         id="text63"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="79.249001"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan63">Queue[n]</tspan></text>
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="30.264952"
+         y="71.84066"
+         id="text64"><tspan
+           sodipodi:role="line"
+           x="30.264952"
+           y="71.84066"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+           id="tspan64">...</tspan></text>
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:7.76111px;font-family:Serif;-inkscape-font-specification:Serif;text-align:start;writing-mode:lr-tb;direction:ltr;text-anchor:start;fill:#000000;fill-opacity:0;stroke:#006680;stroke-width:0.499999;stroke-dasharray:none"
+       x="92.18071"
+       y="128.21965"
+       id="text65"><tspan
+         sodipodi:role="line"
+         id="tspan65"
+         style="font-size:7.76111px;writing-mode:tb-rl;fill:#1a1a1a;stroke:#000000;stroke-width:0.5"
+         x="92.18071"
+         y="128.21965">...</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:7.7611px;font-family:Serif;-inkscape-font-specification:Serif;text-align:start;writing-mode:tb-rl;direction:ltr;text-anchor:start;fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:0.499999;stroke-dasharray:none"
+       x="198.72205"
+       y="80.708267"
+       id="text66"><tspan
+         sodipodi:role="line"
+         id="tspan66"
+         style="stroke-width:0.5"
+         x="198.72205"
+         y="80.708267" /></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="97.905846"
+       y="44.725101"
+       id="text68"><tspan
+         sodipodi:role="line"
+         x="97.905846"
+         y="44.725101"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan68">Hardware Block</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;writing-mode:vertical-lr;text-orientation:upright;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="236.36934"
+       y="112.10503"
+       id="text68-7"><tspan
+         sodipodi:role="line"
+         x="236.36934"
+         y="112.10503"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;writing-mode:vertical-lr;text-orientation:upright;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan68-4">EXECUTION</tspan></text>
+    <rect
+       style="fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:0.940575;stroke-dasharray:7.5246, 0.940575;stroke-dashoffset:0"
+       id="rect68-1"
+       width="68.749969"
+       height="141.2751"
+       x="-129.49162"
+       y="37.881134"
+       ry="0" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-114.4223"
+       y="44.966106"
+       id="text68-2"><tspan
+         sodipodi:role="line"
+         x="-114.4223"
+         y="44.966106"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan68-9">Memory</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12.7px;font-family:Serif;-inkscape-font-specification:Serif;text-align:start;writing-mode:tb-rl;direction:ltr;text-orientation:upright;text-anchor:start;fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:0.499999;stroke-dasharray:none;stroke-dashoffset:0"
+       x="212.6013"
+       y="64.823341"
+       id="text69"><tspan
+         sodipodi:role="line"
+         id="tspan69"
+         style="font-size:12.7px;stroke-width:0.5"
+         x="212.6013"
+         y="64.823341" /></text>
+    <g
+       id="g72">
+      <path
+         style="font-weight:bold;font-size:16.9333px;line-height:1.25;-inkscape-font-specification:'sans-serif Bold';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;stroke-width:0.0690111"
+         d="m 185.24734,83.96512 h 1.28693 c 1.20226,0.01693 2.09973,-1.015998 2.0828,-2.370662 v -9.393759 c -0.0169,-0.711199 0.33866,-1.066798 1.10066,-1.066798 h 0.2032 0.0677 v -1.557864 c -1.0668,0.01693 -1.38853,-0.270933 -1.37159,-1.236131 V 58.96308 c 0.0339,-1.354664 -0.88054,-2.387595 -2.0828,-2.370662 h -1.28693 v 1.676397 h 0.62653 c 0.57573,0 0.77893,0.321733 0.762,1.100664 v 9.122827 c 0,1.219198 0.44027,1.710263 1.64253,1.862663 -1.20226,0.135466 -1.64253,0.626532 -1.64253,1.84573 v 9.122826 c 0.0169,0.660399 -0.23707,0.965198 -0.762,0.965198 h -0.62653 z"
+         id="text70"
+         aria-label="}"
+         sodipodi:nodetypes="ccccsccccccccscscscscc" />
+      <path
+         style="fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:1.25;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#ArrowWideHeavy)"
+         d="M 190.40199,70.278769 H 224.6663"
+         id="path70" />
+    </g>
+    <path
+       style="font-weight:bold;font-size:16.9333px;line-height:1.25;-inkscape-font-specification:'sans-serif Bold';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;stroke-width:0.0690111"
+       d="m -88.44114,74.337891 h 1.28693 c 1.20226,0.01693 2.09973,-1.015998 2.0828,-2.370662 V 62.57347 c -0.0169,-0.711199 0.33866,-1.066798 1.10066,-1.066798 h 0.2032 0.0677 v -1.557864 c -1.0668,0.01693 -1.38853,-0.270933 -1.37159,-1.236131 v -9.376826 c 0.0339,-1.354664 -0.88054,-2.387595 -2.0828,-2.370662 h -1.28693 v 1.676397 h 0.62653 c 0.57573,0 0.77893,0.321733 0.762,1.100664 v 9.122827 c 0,1.219198 0.44027,1.710263 1.64253,1.862663 -1.20226,0.135466 -1.64253,0.626532 -1.64253,1.84573 v 9.122826 c 0.0169,0.660399 -0.23707,0.965198 -0.762,0.965198 h -0.62653 z"
+       id="text70-1"
+       aria-label="}"
+       sodipodi:nodetypes="ccccsccccccccscscscscc" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:16.9333px;font-family:Serif;-inkscape-font-specification:Serif;text-align:start;writing-mode:tb-rl;direction:ltr;text-orientation:upright;text-anchor:start;fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:1.25;stroke-dasharray:none;stroke-dashoffset:0"
+       x="200.88817"
+       y="38.990276"
+       id="text72"><tspan
+         sodipodi:role="line"
+         id="tspan72"
+         style="stroke-width:1.25"
+         x="200.88817"
+         y="38.990276" /></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:6.35px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="205.12828"
+       y="60.090775"
+       id="text73"><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="60.090775"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan73">e.g.,:</tspan><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="68.028275"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan74">queue[0]</tspan></text>
+    <g
+       id="g75"
+       transform="translate(0,40.745853)">
+      <path
+         style="font-weight:bold;font-size:16.9333px;line-height:1.25;-inkscape-font-specification:'sans-serif Bold';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;stroke-width:0.0690111"
+         d="m 185.24734,83.96512 h 1.28693 c 1.20226,0.01693 2.09973,-1.015998 2.0828,-2.370662 v -9.393759 c -0.0169,-0.711199 0.33866,-1.066798 1.10066,-1.066798 h 0.2032 0.0677 v -1.557864 c -1.0668,0.01693 -1.38853,-0.270933 -1.37159,-1.236131 V 58.96308 c 0.0339,-1.354664 -0.88054,-2.387595 -2.0828,-2.370662 h -1.28693 v 1.676397 h 0.62653 c 0.57573,0 0.77893,0.321733 0.762,1.100664 v 9.122827 c 0,1.219198 0.44027,1.710263 1.64253,1.862663 -1.20226,0.135466 -1.64253,0.626532 -1.64253,1.84573 v 9.122826 c 0.0169,0.660399 -0.23707,0.965198 -0.762,0.965198 h -0.62653 z"
+         id="path74"
+         aria-label="}"
+         sodipodi:nodetypes="ccccsccccccccscscscscc" />
+      <path
+         style="fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:1.25;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#ArrowWideHeavy)"
+         d="M 190.40199,70.278769 H 224.6663"
+         id="path75" />
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:6.35px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="205.12828"
+       y="100.83664"
+       id="text76"><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="100.83664"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan75">e.g.,:</tspan><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="108.77414"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan76">queue[4]</tspan></text>
+    <g
+       id="g77"
+       transform="translate(0,85.725048)">
+      <path
+         style="font-weight:bold;font-size:16.9333px;line-height:1.25;-inkscape-font-specification:'sans-serif Bold';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;stroke-width:0.0690111"
+         d="m 185.24734,83.96512 h 1.28693 c 1.20226,0.01693 2.09973,-1.015998 2.0828,-2.370662 v -9.393759 c -0.0169,-0.711199 0.33866,-1.066798 1.10066,-1.066798 h 0.2032 0.0677 v -1.557864 c -1.0668,0.01693 -1.38853,-0.270933 -1.37159,-1.236131 V 58.96308 c 0.0339,-1.354664 -0.88054,-2.387595 -2.0828,-2.370662 h -1.28693 v 1.676397 h 0.62653 c 0.57573,0 0.77893,0.321733 0.762,1.100664 v 9.122827 c 0,1.219198 0.44027,1.710263 1.64253,1.862663 -1.20226,0.135466 -1.64253,0.626532 -1.64253,1.84573 v 9.122826 c 0.0169,0.660399 -0.23707,0.965198 -0.762,0.965198 h -0.62653 z"
+         id="path76"
+         aria-label="}"
+         sodipodi:nodetypes="ccccsccccccccscscscscc" />
+      <path
+         style="fill:#1a1a1a;fill-opacity:0;stroke:#000000;stroke-width:1.25;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#ArrowWideHeavy)"
+         d="M 190.40199,70.278769 H 224.6663"
+         id="path77" />
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:6.35px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="205.12828"
+       y="145.81558"
+       id="text78"><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="145.81558"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan77">e.g.,:</tspan><tspan
+         sodipodi:role="line"
+         x="205.12828"
+         y="153.75308"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:6.35px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan78">queue[n]</tspan></text>
+    <g
+       id="g81">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text79"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan79">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="path79"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path80" />
+    </g>
+    <g
+       id="g82"
+       transform="translate(0,14.287503)">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text81"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan81">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="ellipse81"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path81" />
+    </g>
+    <g
+       id="g83"
+       transform="translate(0,40.745853)">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text82"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan82">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="ellipse82"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path82" />
+    </g>
+    <g
+       id="g84"
+       transform="translate(0,55.033362)">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text83"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan83">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="ellipse83"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path83" />
+    </g>
+    <g
+       id="g85"
+       transform="translate(0,85.195881)">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text84"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan84">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="ellipse84"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path84" />
+    </g>
+    <g
+       id="g86"
+       transform="translate(0,99.48339)">
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-18.502264"
+         y="65.642387"
+         id="text85"><tspan
+           sodipodi:role="line"
+           x="-18.502264"
+           y="65.642387"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;fill:#800000;stroke-width:0.0690111"
+           id="tspan85">HQD</tspan></text>
+      <ellipse
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0"
+         id="ellipse85"
+         cx="-18.407015"
+         cy="63.2188"
+         rx="13.317666"
+         ry="4.4124799" />
+      <path
+         style="fill:#800000;fill-opacity:0;stroke:#800000;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Triangle)"
+         d="M -4.6361224,63.2188 H 10.606988"
+         id="path85" />
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:5.64444px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-35.2131"
+       y="54.673237"
+       id="text86"><tspan
+         sodipodi:role="line"
+         x="-35.2131"
+         y="54.673237"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:5.64444px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan86">Registers</tspan></text>
+    <path
+       style="fill:#800000;fill-opacity:0;stroke:#1a1a1a;stroke-width:1;stroke-dasharray:1, 1;stroke-dashoffset:0;marker-end:url(#ArrowWide)"
+       d="m -45.247972,57.442462 v 5.888987 h 11.344412"
+       id="path86"
+       sodipodi:nodetypes="ccc" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="82.441582"
+       id="text87"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="82.441582"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan87">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="99.240776"
+       id="text88"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="99.240776"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan88">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="116.03998"
+       id="text89"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="116.03998"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan89">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="132.83917"
+       id="text90"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="132.83917"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan90">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:7.05556px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="168.3002"
+       id="text91"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="168.3002"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:7.05556px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan91">MQD</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-74.441521"
+       y="148.1461"
+       id="text92"><tspan
+         sodipodi:role="line"
+         x="-74.441521"
+         y="148.1461"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:10.5833px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;writing-mode:tb-rl;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan92">...</tspan></text>
+    <g
+       id="g97"
+       transform="translate(-5.8208336)">
+      <rect
+         style="fill:#aaffcc;fill-opacity:1;stroke:#1a1a1a;stroke-width:0.5;stroke-dasharray:none;stroke-dashoffset:0"
+         id="rect96"
+         width="58.726093"
+         height="27.598055"
+         x="-142.96434"
+         y="46.852512" />
+      <text
+         xml:space="preserve"
+         style="font-style:normal;font-weight:normal;font-size:4.23333px;line-height:1.25;font-family:sans-serif;text-align:start;letter-spacing:0px;word-spacing:0px;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+         x="-139.74622"
+         y="52.62756"
+         id="text93"><tspan
+           sodipodi:role="line"
+           x="-139.74622"
+           y="52.62756"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+           id="tspan93">HQD Registers</tspan><tspan
+           sodipodi:role="line"
+           x="-139.74622"
+           y="57.91922"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+           id="tspan95">Queue Address in the GPU</tspan><tspan
+           sodipodi:role="line"
+           x="-139.74622"
+           y="63.210884"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+           id="tspan96">Doorbell</tspan><tspan
+           sodipodi:role="line"
+           x="-139.74622"
+           y="68.502548"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+           id="tspan97">...</tspan><tspan
+           sodipodi:role="line"
+           x="-139.74622"
+           y="73.794212"
+           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+           id="tspan94" /></text>
+    </g>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:4.23333px;line-height:1.25;font-family:sans-serif;text-align:start;letter-spacing:0px;word-spacing:0px;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-61.293022"
+       y="-19.380915"
+       id="text93-1"><tspan
+         sodipodi:role="line"
+         x="-61.293022"
+         y="-19.380915"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan104">SWITCH QUEUE:</tspan><tspan
+         sodipodi:role="line"
+         x="-61.293022"
+         y="-14.089252"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+         id="tspan101">WAIT FOR HQD_ACTIVE = 0</tspan><tspan
+         sodipodi:role="line"
+         x="-61.293022"
+         y="-8.7975903"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+         id="tspan105">SAVE QUEUE STATE TO THE MQD</tspan><tspan
+         sodipodi:role="line"
+         x="-61.293022"
+         y="-3.505928"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+         id="tspan102">COPY NEW MQD STATE</tspan><tspan
+         sodipodi:role="line"
+         x="-61.293022"
+         y="1.7857342"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:4.23333px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:start;text-anchor:start;stroke-width:0.0690111"
+         id="tspan103">SET HQD_ACTIVE = 1</tspan></text>
+    <circle
+       style="fill:#ffeeaa;fill-opacity:1;stroke:#1a1a1a;stroke-width:1.88976;stroke-dasharray:none;stroke-dashoffset:0"
+       id="path97"
+       cx="0"
+       cy="0"
+       r="0"
+       transform="matrix(0.26458333,0,0,0.26458333,-149.03517,37.347779)" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:5.64444px;line-height:1.25;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.0690111"
+       x="-36.659206"
+       y="-44.828983"
+       id="text106"><tspan
+         sodipodi:role="line"
+         x="-36.659206"
+         y="-44.828983"
+         style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:5.64444px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';text-align:center;text-anchor:middle;stroke-width:0.0690111"
+         id="tspan106">Firmware</tspan></text>
+    <path
+       style="fill:none;fill-opacity:1;stroke:#1a1a1a;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-start:url(#marker109);marker-end:url(#ArrowTriangleStylized)"
+       d="M -84.242601,-9.1838245 H -98.041629 V 33.17598"
+       id="path106" />
+    <path
+       style="fill:none;fill-opacity:1;stroke:#1a1a1a;stroke-width:1;stroke-dasharray:none;stroke-dashoffset:0;marker-end:url(#Dot)"
+       d="M 9.9745536,-9.3442784 H 29.549918 V 37.170287"
+       id="path107"
+       sodipodi:nodetypes="ccc" />
+  </g>
+</svg>
diff --git linux-libre-6.15-gnu/Documentation/gpu/automated_testing.rst linux-libre-6.16-gnu/Documentation/gpu/automated_testing.rst
index 6d7c6086034d..62aa3ede02a5 100644
--- linux-libre-6.15-gnu/Documentation/gpu/automated_testing.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/automated_testing.rst
@@ -115,6 +115,10 @@ created (eg. https://gitlab.freedesktop.org/janedoe/linux/-/pipelines)
 5. The various jobs will be run and when the pipeline is finished, all jobs
 should be green unless a regression has been found.
 
+6. Warnings in the pipeline indicate that lockdep
+(see Documentation/locking/lockdep-design.rst) issues have been detected
+during the tests.
+
 
 How to update test expectations
 ===============================
diff --git linux-libre-6.15-gnu/Documentation/gpu/driver-uapi.rst linux-libre-6.16-gnu/Documentation/gpu/driver-uapi.rst
index 971cdb4816fc..1f15a8ca1265 100644
--- linux-libre-6.15-gnu/Documentation/gpu/driver-uapi.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/driver-uapi.rst
@@ -27,3 +27,8 @@ drm/xe uAPI
 ===========
 
 .. kernel-doc:: include/uapi/drm/xe_drm.h
+
+drm/asahi uAPI
+================
+
+.. kernel-doc:: include/uapi/drm/asahi_drm.h
diff --git linux-libre-6.15-gnu/Documentation/gpu/drm-kms-helpers.rst linux-libre-6.16-gnu/Documentation/gpu/drm-kms-helpers.rst
index b4ee25af1702..5139705089f2 100644
--- linux-libre-6.15-gnu/Documentation/gpu/drm-kms-helpers.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/drm-kms-helpers.rst
@@ -233,6 +233,21 @@ Panel Self Refresh Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_self_refresh_helper.c
    :export:
 
+HDMI Atomic State Helpers
+=========================
+
+Overview
+--------
+
+.. kernel-doc:: drivers/gpu/drm/display/drm_hdmi_state_helper.c
+   :doc: hdmi helpers
+
+Functions Reference
+-------------------
+
+.. kernel-doc:: drivers/gpu/drm/display/drm_hdmi_state_helper.c
+   :export:
+
 HDCP Helper Functions Reference
 ===============================
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/nouveau.rst linux-libre-6.16-gnu/Documentation/gpu/nouveau.rst
index 0f34131ccc27..cab2e81013bc 100644
--- linux-libre-6.15-gnu/Documentation/gpu/nouveau.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/nouveau.rst
@@ -25,5 +25,8 @@ providing a consistent API to upper layers of the driver stack.
 GSP Support
 ------------------------
 
-.. kernel-doc:: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c
+.. kernel-doc:: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c
    :doc: GSP message queue element
+
+.. kernel-doc:: drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h
+   :doc: GSP message handling policy
diff --git linux-libre-6.15-gnu/Documentation/gpu/nova/core/todo.rst linux-libre-6.16-gnu/Documentation/gpu/nova/core/todo.rst
index ca08377d3b73..8a459fc08812 100644
--- linux-libre-6.15-gnu/Documentation/gpu/nova/core/todo.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/nova/core/todo.rst
@@ -102,7 +102,13 @@ Usage:
 	let boot0 = Boot0::read(&bar);
 	pr_info!("Revision: {}\n", boot0.revision());
 
+Note: a work-in-progress implementation currently resides in
+`drivers/gpu/nova-core/regs/macros.rs` and is used in nova-core. It would be
+nice to improve it (possibly using proc macros) and move it to the `kernel`
+crate so it can be used by other components as well.
+
 | Complexity: Advanced
+| Contact: Alexandre Courbot
 
 Delay / Sleep abstractions
 --------------------------
@@ -190,16 +196,6 @@ Rust abstraction for debugfs APIs.
 | Reference: Export GSP log buffers
 | Complexity: Intermediate
 
-Vec extensions
---------------
-
-Implement ``Vec::truncate`` and ``Vec::resize``.
-
-Currently this is used for some experimental code to parse the vBIOS.
-
-| Reference vBIOS support
-| Complexity: Beginner
-
 GPU (general)
 =============
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/rfc/i915_scheduler.rst linux-libre-6.16-gnu/Documentation/gpu/rfc/i915_scheduler.rst
index c237ebc024cd..2974525f0ac5 100644
--- linux-libre-6.15-gnu/Documentation/gpu/rfc/i915_scheduler.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/rfc/i915_scheduler.rst
@@ -26,7 +26,7 @@ i915 with the DRM scheduler is:
 	  which configures a slot with N contexts
 	* After I915_CONTEXT_ENGINES_EXT_PARALLEL a user can submit N batches to
 	  a slot in a single execbuf IOCTL and the batches run on the GPU in
-	  paralllel
+	  parallel
 	* Initially only for GuC submission but execlists can be supported if
 	  needed
 * Convert the i915 to use the DRM scheduler
diff --git linux-libre-6.15-gnu/Documentation/gpu/todo.rst linux-libre-6.16-gnu/Documentation/gpu/todo.rst
index 256d0d1cb216..c57777a24e03 100644
--- linux-libre-6.15-gnu/Documentation/gpu/todo.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/todo.rst
@@ -441,14 +441,15 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de>
 
 Level: Intermediate
 
-Request memory regions in all drivers
--------------------------------------
+Request memory regions in all fbdev drivers
+--------------------------------------------
 
-Go through all drivers and add code to request the memory regions that the
-driver uses. This requires adding calls to request_mem_region(),
+Old/ancient fbdev drivers do not request their memory properly.
+Go through these drivers and add code to request the memory regions
+that the driver uses. This requires adding calls to request_mem_region(),
 pci_request_region() or similar functions. Use helpers for managed cleanup
-where possible.
-
+where possible. Problematic areas include hardware that has exclusive ranges
+like VGA. VGA16fb does not request the range as it is expected.
 Drivers are pretty bad at doing this and there used to be conflicts among
 DRM and fbdev drivers. Still, it's the correct thing to do.
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/vgaarbiter.rst linux-libre-6.16-gnu/Documentation/gpu/vgaarbiter.rst
index bde3c0afb059..d1e953712cc2 100644
--- linux-libre-6.15-gnu/Documentation/gpu/vgaarbiter.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/vgaarbiter.rst
@@ -11,9 +11,9 @@ Section 7, Legacy Devices.
 
 The Resource Access Control (RAC) module inside the X server [0] existed for
 the legacy VGA arbitration task (besides other bus management tasks) when more
-than one legacy device co-exists on the same machine. But the problem happens
+than one legacy device co-exist on the same machine. But the problem happens
 when these devices are trying to be accessed by different userspace clients
-(e.g. two server in parallel). Their address assignments conflict. Moreover,
+(e.g. two servers in parallel). Their address assignments conflict. Moreover,
 ideally, being a userspace application, it is not the role of the X server to
 control bus resources. Therefore an arbitration scheme outside of the X server
 is needed to control the sharing of these resources. This document introduces
@@ -106,7 +106,7 @@ In-kernel interface
 libpciaccess
 ------------
 
-To use the vga arbiter char device it was implemented an API inside the
+To use the vga arbiter char device, an API was implemented inside the
 libpciaccess library. One field was added to struct pci_device (each device
 on the system)::
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/xe/index.rst linux-libre-6.16-gnu/Documentation/gpu/xe/index.rst
index 92cfb25e64d3..42ba6c263cd0 100644
--- linux-libre-6.15-gnu/Documentation/gpu/xe/index.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/xe/index.rst
@@ -16,6 +16,7 @@ DG2, etc is provided to prototype the driver.
    xe_migrate
    xe_cs
    xe_pm
+   xe_gt_freq
    xe_pcode
    xe_gt_mcr
    xe_wa
@@ -25,3 +26,4 @@ DG2, etc is provided to prototype the driver.
    xe_debugging
    xe_devcoredump
    xe-drm-usage-stats.rst
+   xe_configfs
diff --git linux-libre-6.15-gnu/Documentation/gpu/xe/xe_configfs.rst linux-libre-6.16-gnu/Documentation/gpu/xe/xe_configfs.rst
new file mode 100644
index 000000000000..9b9d941eb20e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/xe/xe_configfs.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. _xe_configfs:
+
+============
+Xe Configfs
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_configfs.c
+   :doc: Xe Configfs
diff --git linux-libre-6.15-gnu/Documentation/gpu/xe/xe_firmware.rst linux-libre-6.16-gnu/Documentation/gpu/xe/xe_firmware.rst
index afcb561cd37d..5d23e9f27391 100644
--- linux-libre-6.15-gnu/Documentation/gpu/xe/xe_firmware.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/xe/xe_firmware.rst
@@ -31,6 +31,12 @@ GuC Power Conservation (PC)
 .. kernel-doc:: drivers/gpu/drm/xe/xe_guc_pc.c
    :doc: GuC Power Conservation (PC)
 
+PCIe Gen5 Limitations
+=====================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_device_sysfs.c
+   :doc: PCIe Gen5 Limitations
+
 Internal API
 ============
 
diff --git linux-libre-6.15-gnu/Documentation/gpu/xe/xe_gt_freq.rst linux-libre-6.16-gnu/Documentation/gpu/xe/xe_gt_freq.rst
new file mode 100644
index 000000000000..c0811200e327
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/gpu/xe/xe_gt_freq.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+==========================
+Xe GT Frequency Management
+==========================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :doc: Xe GT Frequency Management
+
+Internal API
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c
+   :internal:
diff --git linux-libre-6.15-gnu/Documentation/gpu/xe/xe_pcode.rst linux-libre-6.16-gnu/Documentation/gpu/xe/xe_pcode.rst
index d2e22cc45061..5937ef3599b0 100644
--- linux-libre-6.15-gnu/Documentation/gpu/xe/xe_pcode.rst
+++ linux-libre-6.16-gnu/Documentation/gpu/xe/xe_pcode.rst
@@ -12,3 +12,10 @@ Internal API
 
 .. kernel-doc:: drivers/gpu/drm/xe/xe_pcode.c
    :internal:
+
+==================
+Boot Survivability
+==================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_survivability_mode.c
+   :doc: Xe Boot Survivability
diff --git linux-libre-6.15-gnu/Documentation/hid/intel-thc-hid.rst linux-libre-6.16-gnu/Documentation/hid/intel-thc-hid.rst
index 6c417205ac6a..dc9250787fc5 100644
--- linux-libre-6.15-gnu/Documentation/hid/intel-thc-hid.rst
+++ linux-libre-6.16-gnu/Documentation/hid/intel-thc-hid.rst
@@ -182,7 +182,7 @@ value and use PIO write (by setting SubIP write opcode) to do a write operation.
 
 THC also includes two GPIO pins, one for interrupt and the other for device reset control.
 
-Interrupt line can be configured to either level triggerred or edge triggerred by setting MMIO
+Interrupt line can be configured to either level triggered or edge triggered by setting MMIO
 Control register.
 
 Reset line is controlled by BIOS (or EFI) through ACPI _RST method, driver needs to call this
@@ -302,10 +302,10 @@ waiting for interrupt ready then read out the data from system memory.
 3.3.2 Software DMA channel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-THC supports a software triggerred RxDMA mode to read the touch data from touch IC. This SW RxDMA
+THC supports a software triggered RxDMA mode to read the touch data from touch IC. This SW RxDMA
 is the 3rd THC RxDMA engine with the similar functionalities as the existing two RxDMAs, the only
-difference is this SW RxDMA is triggerred by software, and RxDMA2 is triggerred by external Touch IC
-interrupt. It gives a flexiblity to software driver to use RxDMA read Touch IC data in any time.
+difference is this SW RxDMA is triggered by software, and RxDMA2 is triggered by external Touch IC
+interrupt. It gives a flexibility to software driver to use RxDMA read Touch IC data in any time.
 
 Before software starts a SW RxDMA, it shall stop the 1st and 2nd RxDMA, clear PRD read/write pointer
 and quiesce the device interrupt (THC_DEVINT_QUIESCE_HW_STS = 1), other operations are the same with
diff --git linux-libre-6.15-gnu/Documentation/hwmon/acpi_power_meter.rst linux-libre-6.16-gnu/Documentation/hwmon/acpi_power_meter.rst
index 8628c1161015..a91403a2a26f 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/acpi_power_meter.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/acpi_power_meter.rst
@@ -37,9 +37,16 @@ arbitrary strings that ACPI provides with the meter.  The measures/ directory
 contains symlinks to the devices that this meter measures.
 
 Some computers have the ability to enforce a power cap in hardware.  If this is
-the case, the `power[1-*]_cap` and related sysfs files will appear.  When the
-average power consumption exceeds the cap, an ACPI event will be broadcast on
-the netlink event socket and a poll notification will be sent to the
+the case, the `power[1-*]_cap` and related sysfs files will appear.
+For information on enabling the power cap feature, refer to the description
+of the "force_on_cap" option in the "Module Parameters" chapter.
+To use the power cap feature properly, you need to set appropriate value
+(in microWatts) to the `power[1-*]_cap` sysfs files.
+The value must be within the range between the minimum value at `power[1-]_cap_min`
+and the maximum value at `power[1-]_cap_max (both in microWatts)`.
+
+When the average power consumption exceeds the cap, an ACPI event will be
+broadcast on the netlink event socket and a poll notification will be sent to the
 appropriate `power[1-*]_alarm` file to indicate that capping has begun, and the
 hardware has taken action to reduce power consumption.  Most likely this will
 result in reduced performance.
@@ -52,3 +59,19 @@ follows:
 `power[1-*]_cap` will be notified if the firmware changes the power cap.
 `power[1-*]_interval` will be notified if the firmware changes the averaging
 interval.
+
+Module Parameters
+-----------------
+
+* force_cap_on: bool
+                        Forcefully enable the power capping feature to specify
+                        the upper limit of the system's power consumption.
+
+                        By default, the driver's power capping feature is only
+                        enabled on IBM products.
+                        Therefore, on other systems that support power capping,
+                        you will need to use the option to enable it.
+
+                        Note: power capping is potentially unsafe feature.
+                        Please check the platform specifications to make sure
+                        that capping is supported before using this option.
diff --git linux-libre-6.15-gnu/Documentation/hwmon/asus_ec_sensors.rst linux-libre-6.16-gnu/Documentation/hwmon/asus_ec_sensors.rst
index d2be9db29614..816d1f9947ea 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/asus_ec_sensors.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/asus_ec_sensors.rst
@@ -4,6 +4,7 @@ Kernel driver asus_ec_sensors
 =================================
 
 Supported boards:
+ * MAXIMUS VI HERO
  * PRIME X470-PRO
  * PRIME X570-PRO
  * PRIME X670E-PRO WIFI
@@ -20,6 +21,7 @@ Supported boards:
  * ROG CROSSHAIR X670E GENE
  * ROG MAXIMUS XI HERO
  * ROG MAXIMUS XI HERO (WI-FI)
+ * ROG MAXIMUS Z690 FORMULA
  * ROG STRIX B550-E GAMING
  * ROG STRIX B550-I GAMING
  * ROG STRIX X570-E GAMING
diff --git linux-libre-6.15-gnu/Documentation/hwmon/ina238.rst linux-libre-6.16-gnu/Documentation/hwmon/ina238.rst
index d9f479984420..9a24da4786a4 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/ina238.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/ina238.rst
@@ -14,6 +14,12 @@ Supported chips:
     Datasheet:
 	https://www.ti.com/lit/gpn/ina238
 
+  * Silergy SQ52206
+
+    Prefix: 'SQ52206'
+
+    Addresses: I2C 0x40 - 0x4f
+
 Author: Nathan Rossi <nathan.rossi@digi.com>
 
 Description
@@ -54,3 +60,12 @@ temp1_input		Die temperature measurement (mC)
 temp1_max		Maximum die temperature threshold (mC)
 temp1_max_alarm		Maximum die temperature alarm
 ======================= =======================================================
+
+Additional sysfs entries for sq52206
+------------------------------------
+
+======================= =======================================================
+energy1_input		Energy measurement (uJ)
+
+power1_input_highest	Peak Power (uW)
+======================= =======================================================
diff --git linux-libre-6.15-gnu/Documentation/hwmon/index.rst linux-libre-6.16-gnu/Documentation/hwmon/index.rst
index f0ddf6222c44..b45bfb4ebf30 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/index.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/index.rst
@@ -106,6 +106,8 @@ Hardware Monitoring Kernel Drivers
    jc42
    k10temp
    k8temp
+   kbatt
+   kfan
    lan966x
    lineage-pem
    lm25066
@@ -125,6 +127,7 @@ Hardware Monitoring Kernel Drivers
    lm95234
    lm95245
    lochnagar
+   lt3074
    lt7182s
    ltc2992
    ltc2945
@@ -161,6 +164,7 @@ Hardware Monitoring Kernel Drivers
    max6639
    max6650
    max6697
+   max77705
    max8688
    mc13783-adc
    mc34vr500
@@ -189,7 +193,6 @@ Hardware Monitoring Kernel Drivers
    nzxt-kraken3
    nzxt-smart2
    occ
-   oxp-sensors
    pc87360
    pc87427
    pcf8591
diff --git linux-libre-6.15-gnu/Documentation/hwmon/kbatt.rst linux-libre-6.16-gnu/Documentation/hwmon/kbatt.rst
new file mode 100644
index 000000000000..b72718c5ede3
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/hwmon/kbatt.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver kbatt
+===================
+
+Supported chips:
+
+  * KEBA battery monitoring controller (IP core in FPGA)
+
+    Prefix: 'kbatt'
+
+Authors:
+
+	Gerhard Engleder <eg@keba.com>
+	Petar Bojanic <boja@keba.com>
+
+Description
+-----------
+
+The KEBA battery monitoring controller is an IP core for FPGAs, which
+monitors the health of a coin cell battery. The coin cell battery is
+typically used to supply the RTC during power off to keep the current
+time. E.g., the CP500 FPGA includes this IP core to monitor the coin cell
+battery of PLCs and the corresponding cp500 driver creates an auxiliary
+device for the kbatt driver.
+
+This driver provides information about the coin cell battery health to
+user space. Actually the user space shall be informed that the coin cell
+battery is nearly empty and needs to be replaced.
+
+The coin cell battery must be tested actively to get to know if its nearly
+empty or not. Therefore, a load is put on the coin cell battery and the
+resulting voltage is evaluated. This evaluation is done by some hard wired
+analog logic, which compares the voltage to a defined limit. If the
+voltage is above the limit, then the coin cell battery is assumed to be
+ok. If the voltage is below the limit, then the coin cell battery is
+nearly empty (or broken, removed, ...) and shall be replaced by a new one.
+The KEBA battery monitoring controller allows to start the test of the
+coin cell battery and to get the result if the voltage is above or below
+the limit. The actual voltage is not available. Only the information if
+the voltage is below a limit is available.
+
+The test load, which is put on the coin cell battery for the health check,
+is similar to the load during power off. Therefore, the lifetime of the
+coin cell battery is reduced directly by the duration of each test. To
+limit the negative impact to the lifetime the test is limited to at most
+once every 10 seconds. The test load is put on the coin cell battery for
+100ms. Thus, in worst case the coin cell battery lifetime is reduced by
+1% of the uptime or 3.65 days per year. As the coin cell battery lasts
+multiple years, this lifetime reduction negligible.
+
+This driver only provides a single alarm attribute, which is raised when
+the coin cell battery is nearly empty.
+
+====================== ==== ===================================================
+Attribute              R/W  Contents
+====================== ==== ===================================================
+in0_min_alarm          R    voltage of coin cell battery under load is below
+                            limit
+====================== ==== ===================================================
diff --git linux-libre-6.15-gnu/Documentation/hwmon/kfan.rst linux-libre-6.16-gnu/Documentation/hwmon/kfan.rst
new file mode 100644
index 000000000000..ce02dddfb4b8
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/hwmon/kfan.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver kfan
+==================
+
+Supported chips:
+
+  * KEBA fan controller (IP core in FPGA)
+
+    Prefix: 'kfan'
+
+Authors:
+
+	Gerhard Engleder <eg@keba.com>
+	Petar Bojanic <boja@keba.com>
+
+Description
+-----------
+
+The KEBA fan controller is an IP core for FPGAs, which monitors the health
+and controls the speed of a fan. The fan is typically used to cool the CPU
+and the whole device. E.g., the CP500 FPGA includes this IP core to monitor
+and control the fan of PLCs and the corresponding cp500 driver creates an
+auxiliary device for the kfan driver.
+
+This driver provides information about the fan health to user space.
+The user space shall be informed if the fan is removed or blocked.
+Additionally, the speed in RPM is reported for fans with tacho signal.
+
+For fan control PWM is supported. For PWM 255 equals 100%. None-regulable
+fans can be turned on with PWM 255 and turned off with PWM 0.
+
+====================== ==== ===================================================
+Attribute              R/W  Contents
+====================== ==== ===================================================
+fan1_fault             R    Fan fault
+fan1_input             R    Fan tachometer input (in RPM)
+pwm1                   RW   Fan target duty cycle (0..255)
+====================== ==== ===================================================
diff --git linux-libre-6.15-gnu/Documentation/hwmon/lt3074.rst linux-libre-6.16-gnu/Documentation/hwmon/lt3074.rst
new file mode 100644
index 000000000000..234f369153cf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/hwmon/lt3074.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver lt3074
+====================
+
+Supported chips:
+
+  * Analog Devices LT3074
+
+    Prefix: 'lt3074'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.analog.com/en/products/lt3074.html
+
+Authors: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices LT3074 Linear
+Regulator with PMBus interface.
+
+The LT3074 is a low voltage, ultra-low noise and ultra-fast transient
+response linear regulator with PMBus serial interface. PMBus telemetry
+feature provides information regarding the output voltage and current,
+input voltage, bias voltage and die temperature.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst
+for details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_max			Input overvoltage warning limit
+in1_max_alarm		Input overvoltage warning status
+in1_min			Input undervoltage warning limit
+in1_min_alarm		Input undervoltage warning status
+in2_label		"vmon"
+in2_input		Measured bias voltage
+in2_max			Bias overvoltage warning limit
+in2_min			Bias undervoltage warning limit
+in3_label		"vout1"
+in3_input		Measured output voltage
+in3_max			Output overvoltage warning limit
+in3_max_alarm		Output overvoltage warning status
+in3_min			Output undervoltage warning limit
+in3_min_alarm		Output undervoltage warning status
+curr1_label		"iout1"
+curr1_input		Measured output current.
+curr1_crit		Output overcurrent fault limit
+curr1_crit_alarm	Output overcurrent fault status
+temp1_input		Measured temperature
+temp1_max		Maximum temperature limit
+temp1_max_alarm		Overtemperature warning status
+======================= =======================================================
diff --git linux-libre-6.15-gnu/Documentation/hwmon/max34440.rst linux-libre-6.16-gnu/Documentation/hwmon/max34440.rst
index 162d289f0814..8591a7152ce5 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/max34440.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/max34440.rst
@@ -3,6 +3,14 @@ Kernel driver max34440
 
 Supported chips:
 
+  * ADI ADPM12160
+
+    Prefixes: 'adpm12160'
+
+    Addresses scanned: -
+
+    Datasheet: -
+
   * Maxim MAX34440
 
     Prefixes: 'max34440'
@@ -67,13 +75,14 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
-It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
-Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
-based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
-supports 16 voltage channels.
+This driver supports multiple devices: hardware monitoring for Maxim MAX34440
+PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply
+Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data
+Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and
+MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring
+voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12
+voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260
+also monitors both input and output of voltage and current.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -128,7 +137,10 @@ in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 ======================= =======================================================
 
-.. note:: MAX34446 only supports in[1-4].
+.. note::
+
+    - MAX34446 only supports in[1-4].
+    - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively.
 
 Curr
 ~~~~
@@ -150,6 +162,7 @@ curr[1-6]_reset_history	Write any value to reset history.
 
     - in6 and curr6 attributes only exist for MAX34440.
     - MAX34446 only supports curr[1-4].
+    - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5].
 
 Power
 ~~~~~
@@ -185,6 +198,7 @@ temp[1-8]_reset_history	Write any value to reset history.
 .. note::
    - temp7 and temp8 attributes only exist for MAX34440.
    - MAX34446 only supports temp[1-3].
+   - ADPM12160 only supports temp[1].
 
 
 .. note::
diff --git linux-libre-6.15-gnu/Documentation/hwmon/max77705.rst linux-libre-6.16-gnu/Documentation/hwmon/max77705.rst
new file mode 100644
index 000000000000..4a7680a340e1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/hwmon/max77705.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max77705
+======================
+
+Supported chips:
+
+  * Maxim Integrated MAX77705
+
+    Prefix: 'max77705'
+
+    Addresses scanned: none
+
+    Datasheet: Not available
+
+Authors:
+      - Dzmitry Sankouski <dsankouski@gmail.com>
+
+Description
+-----------
+
+The MAX77705 PMIC provides current and voltage measurements besides fuelgauge:
+- chip input current
+- system bus current and voltage
+- VBYP voltage
+
+Sysfs Attributes
+----------------
+
+================= ========================================
+in1_label         "vbyp"
+in1_input         Measured chip vbyp voltage
+in2_label         "vsys"
+in2_input         Measured chip system bus voltage
+curr1_label       "iin"
+curr1_input       Measured chip input current.
+curr2_label       "isys"
+curr2_input       Measured chip system bus current.
+================= ========================================
diff --git linux-libre-6.15-gnu/Documentation/hwmon/mpq8785.rst linux-libre-6.16-gnu/Documentation/hwmon/mpq8785.rst
index bf8176b87086..198d5dfd7c30 100644
--- linux-libre-6.15-gnu/Documentation/hwmon/mpq8785.rst
+++ linux-libre-6.16-gnu/Documentation/hwmon/mpq8785.rst
@@ -5,6 +5,8 @@ Kernel driver mpq8785
 
 Supported chips:
 
+  * MPS MPM3695 family
+  * MPS MPM82504
   * MPS MPQ8785
 
     Prefix: 'mpq8785'
@@ -14,6 +16,22 @@ Author: Charles Hsu <ythsu0511@gmail.com>
 Description
 -----------
 
+The MPM3695 family is a scalable, ultra-thin, fully integrated power module with
+a PMBus interface. It offers a complete power solution that achieves up to
+10A (-10 variant), 20A (-25 variant), 25A (-20 variant), 100A (-100 variant)
+of output current with excellent load and line regulation across a wide input
+voltage range. It operates at high efficiency over a wide load range, and can
+be parallled to deliver higher current. Variants -10,-20 and -100 have different
+voltage scale configuration register range (10 bits) than -25 version (11 bits).
+
+The MPM82504 is a quad 25A, scalable, fully integrated power module with a PMBus
+interface. The device offers a complete power solution that achieves up to 25A
+per output channel. The MPM82504 has four output channels that can be paralleled
+to provide 50A, 75A, or 100A of output current for flexible configurations.
+The device can also operate in parallel with the MPM3695-100 and additional
+MPM82504 devices to provide a higher output current. The MPM82504 operates
+at high efficiency across a wide load range.
+
 The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
 buck converter. The MPQ8785 offers a very compact solution that achieves up to
 40A output current per phase, with excellent load and line regulation over a
@@ -23,19 +41,16 @@ output current load range.
 The PMBus interface provides converter configurations and key parameters
 monitoring.
 
-The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+The devices adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
 control, which provides fast transient response and eases loop stabilization.
-The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
-with excellent current sharing and phase interleaving for high-current
+The MCOT scheme also allows multiple devices or channels to be connected in
+parallel with excellent current sharing and phase interleaving for high-current
 applications.
 
 Fully integrated protection features include over-current protection (OCP),
 over-voltage protection (OVP), under-voltage protection (UVP), and
 over-temperature protection (OTP).
 
-The MPQ8785 requires a minimal number of readily available, standard external
-components, and is available in a TLGA (5mmx6mm) package.
-
 Device compliant with:
 
 - PMBus rev 1.3 interface.
diff --git linux-libre-6.15-gnu/Documentation/hwmon/oxp-sensors.rst linux-libre-6.16-gnu/Documentation/hwmon/oxp-sensors.rst
deleted file mode 100644
index 581c4dafbfa1..000000000000
--- linux-libre-6.15-gnu/Documentation/hwmon/oxp-sensors.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0-or-later
-
-Kernel driver oxp-sensors
-=========================
-
-Authors:
-    - Derek John Clark <derekjohn.clark@gmail.com>
-    - Joaquín Ignacio Aramendía <samsagax@gmail.com>
-
-Description:
-------------
-
-Handheld devices from OneNetbook, AOKZOE, AYANEO, And OrangePi provide fan
-readings and fan control through their embedded controllers.
-
-Currently supports OneXPlayer devices, AOKZOE, AYANEO, and OrangePi
-handheld devices. AYANEO devices preceding the AIR and OneXPlayer devices
-preceding the Mini A07 are not supportable as the EC model is different
-and do not have manual control capabilities.
-
-Some OneXPlayer and AOKZOE models have a toggle for changing the behaviour
-of the "Turbo/Silent" button of the device. It will change the key event
-that it triggers with a flip of the `tt_toggle` attribute. See below for
-boards that support this function.
-
-Supported devices
------------------
-
-Currently the driver supports the following handhelds:
-
- - AOKZOE A1
- - AOKZOE A1 PRO
- - AYANEO 2
- - AYANEO 2S
- - AYANEO AIR
- - AYANEO AIR 1S
- - AYANEO AIR Plus (Mendocino)
- - AYANEO AIR Pro
- - AYANEO Flip DS
- - AYANEO Flip KB
- - AYANEO Geek
- - AYANEO Geek 1S
- - AYANEO KUN
- - OneXPlayer 2
- - OneXPlayer 2 Pro
- - OneXPlayer AMD
- - OneXPlayer mini AMD
- - OneXPlayer mini AMD PRO
- - OneXPlayer OneXFly
- - OneXPlayer X1 A
- - OneXPlayer X1 i
- - OneXPlayer X1 mini
- - OrangePi NEO-01
-
-"Turbo/Silent" button behaviour toggle is only supported on:
- - AOK ZOE A1
- - AOK ZOE A1 PRO
- - OneXPlayer 2
- - OneXPlayer 2 Pro
- - OneXPlayer mini AMD (only with updated alpha BIOS)
- - OneXPlayer mini AMD PRO
- - OneXPlayer OneXFly
- - OneXPlayer X1 A
- - OneXPlayer X1 i
- - OneXPlayer X1 mini
-
-Sysfs entries
--------------
-
-The following attributes are supported:
-
-fan1_input
-  Read Only. Reads current fan RPM.
-
-pwm1_enable
-  Read Write. Enable manual fan control. Write "1" to set to manual, write "0"
-  to let the EC control de fan speed. Read this attribute to see current status.
-
-pwm1
-  Read Write. Read this attribute to see current duty cycle in the range [0-255].
-  When pwm1_enable is set to "1" (manual) write any value in the range [0-255]
-  to set fan speed.
-
-tt_toggle
-  Read Write. Read this attribute to check the status of the turbo/silent
-  button behaviour function. Write "1" to activate the switch and "0" to
-  deactivate it. The specific keycodes and behaviour is specific to the device
-  both with this function on and off. This attribute is attached to the platform
-  driver and not to the hwmon driver (/sys/devices/platform/oxp-platform/tt_toggle)
diff --git linux-libre-6.15-gnu/Documentation/i2c/busses/i2c-parport.rst linux-libre-6.16-gnu/Documentation/i2c/busses/i2c-parport.rst
index a9b4e8133700..4cbf45952d52 100644
--- linux-libre-6.15-gnu/Documentation/i2c/busses/i2c-parport.rst
+++ linux-libre-6.16-gnu/Documentation/i2c/busses/i2c-parport.rst
@@ -84,7 +84,7 @@ Remarks:
                    \|
 
    must be 74HC05, they must be open collector output.
- - All resitors are 10k.
+ - All resistors are 10k.
  - Pins 18-25 of the parallel port connected to GND.
  - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
    The ADM1032 evaluation board uses D4-D7. Beware that the amount of
diff --git linux-libre-6.15-gnu/Documentation/iio/ad3552r.rst linux-libre-6.16-gnu/Documentation/iio/ad3552r.rst
new file mode 100644
index 000000000000..f5d59e4e86c7
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/iio/ad3552r.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+==============
+AD3552R driver
+==============
+
+Device driver for Analog Devices Inc. AD35XXR series of DACs. The module name
+is ``ad3552r``.
+With the same module name, two different driver variants are available, the
+``generic spi`` variant, to be used with any classic SPI controllers, and the
+``hs`` (high speed) variant, for an ADI ``axi-dac`` (IP core) based controller
+that allows to reach the maximum sample rate supported from the DACs, using the
+DMA transfer and all the SPI lines available (D/QDSPI)..
+The high speed driver variant is intended to be used with the ``adi-axi-dac``
+backend support enabled, that is enabled by default when the driver is selected.
+
+Supported devices
+=================
+
+* `AD3541R <https://www.analog.com/en/products/ad3541r.html>`_
+* `AD3542R <https://www.analog.com/en/products/ad3542r.html>`_
+* `AD3551R <https://www.analog.com/en/products/ad3551r.html>`_
+* `AD3552R <https://www.analog.com/en/products/ad3552r.html>`_
+
+Wiring connections
+==================
+
+Generic SPI
+-----------
+Use the classic SPI S_CLK/CS/SDO/SDI connection.
+
+High speed (using axi-dac backend)
+----------------------------------
+
+::
+
+    .-----------------.                .-------.
+    |                 |--- D/QSPI -----|       |
+    |   DAC IP CORE   |--- SPI S_CLK --|  DAC  |
+    |                 |--- SPI CS -----|       |
+    |                 |--- LDAC -------|       |
+    |                 |--- RESET ------|       |
+    |_________________|                |_______|
+
+
+High speed features
+===================
+
+Device attributes
+-----------------
+
+The following table shows the ad35xxr related device debug files, found in the
+specific debugfs path ``/sys/kernel/debug/iio/iio:deviceX``.
+
++-----------------------+------------------------------------------------------+
+| Debugfs device files  | Description                                          |
++-----------------------+------------------------------------------------------+
+| data_source           | The used data source, as                             |
+|                       | ``normal``, ``ramp-16bit``, etc.                     |
++-----------------------+------------------------------------------------------+
+| data_source_available | The available data sources.                          |
++-----------------------+------------------------------------------------------+
+
+Usage examples
+--------------
+
+. code-block:: bash
+	root:/sys/bus/iio/devices/iio:device0# cat data_source
+	normal
+	root:/sys/bus/iio/devices/iio:device0# echo -n ramp-16bit > data_source
+	root:/sys/bus/iio/devices/iio:device0# cat data_source
+	ramp-16bit
diff --git linux-libre-6.15-gnu/Documentation/iio/ad4000.rst linux-libre-6.16-gnu/Documentation/iio/ad4000.rst
index de8fd3ae6e62..c1d04d3436d2 100644
--- linux-libre-6.15-gnu/Documentation/iio/ad4000.rst
+++ linux-libre-6.16-gnu/Documentation/iio/ad4000.rst
@@ -4,7 +4,7 @@
 AD4000 driver
 =============
 
-Device driver for Analog Devices Inc. AD4000 series of ADCs.
+Device driver for Analog Devices Inc. AD4000 series of ADCs and similar devices.
 
 Supported devices
 =================
@@ -25,6 +25,21 @@ Supported devices
 * `AD4022 <https://www.analog.com/AD4022>`_
 * `ADAQ4001 <https://www.analog.com/ADAQ4001>`_
 * `ADAQ4003 <https://www.analog.com/ADAQ4003>`_
+* `AD7685 <https://www.analog.com/AD7685>`_
+* `AD7686 <https://www.analog.com/AD7686>`_
+* `AD7687 <https://www.analog.com/AD7687>`_
+* `AD7688 <https://www.analog.com/AD7688>`_
+* `AD7690 <https://www.analog.com/AD7690>`_
+* `AD7691 <https://www.analog.com/AD7691>`_
+* `AD7693 <https://www.analog.com/AD7693>`_
+* `AD7942 <https://www.analog.com/AD7942>`_
+* `AD7946 <https://www.analog.com/AD7946>`_
+* `AD7980 <https://www.analog.com/AD7980>`_
+* `AD7982 <https://www.analog.com/AD7982>`_
+* `AD7983 <https://www.analog.com/AD7983>`_
+* `AD7984 <https://www.analog.com/AD7984>`_
+* `AD7988-1 <https://www.analog.com/AD7988-1>`_
+* `AD7988-5 <https://www.analog.com/AD7988-5>`_
 
 Wiring connections
 ------------------
@@ -129,3 +144,77 @@ Set ``adi,sdi-pin`` to ``"cs"`` to select this mode.
                     ^                    |             |
                     +--------------------| SCLK        |
                                          +-------------+
+
+IIO Device characteristics
+==========================
+
+The AD4000 series driver supports differential and pseudo-differential ADCs.
+
+The span compression feature available in AD4000 series devices can be
+enabled/disabled by changing the ``_scale_available`` attribute of the voltage
+channel. Note that span compression configuration requires writing to AD4000
+configuration register, which is only possible when the ADC is wired in 3-wire
+turbo mode, and the SPI controller is ``SPI_MOSI_IDLE_HIGH`` capable. If those
+conditions are not met, no ``_scale_available`` attribute is provided.
+
+Besides that, differential and pseudo-differential voltage channels present
+slightly different sysfs interfaces.
+
+Pseudo-differential ADCs
+------------------------
+
+Typical voltage channel attributes of a pseudo-differential AD4000 series device:
+
++-------------------------------------------+------------------------------------------+
+| Voltage Channel Attributes                | Description                              |
++===========================================+==========================================+
+| ``in_voltage0_raw``                       | Raw ADC output code.                     |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_offset``                    | Offset to convert raw value to mV.       |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_scale``                     | Scale factor to convert raw value to mV. |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_scale_available``           | Toggles input span compression           |
++-------------------------------------------+------------------------------------------+
+
+Differential ADCs
+-----------------
+
+Typical voltage channel attributes of a differential AD4000 series device:
+
++-------------------------------------------+------------------------------------------+
+| Voltage Channel Attributes                | Description                              |
++===========================================+==========================================+
+| ``in_voltage0-voltage1_raw``              | Raw ADC output code.                     |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0-voltage1_scale``            | Scale factor to convert raw value to mV. |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0-voltage1_scale_available``  | Toggles input span compression           |
++-------------------------------------------+------------------------------------------+
+
+SPI offload support
+-------------------
+
+To be able to achieve the maximum sample rate, the driver can be used with SPI
+offload engines such as the one usually present in `AXI SPI Engine`_, to provide
+SPI offload support.
+
+.. _AXI SPI Engine: http://analogdevicesinc.github.io/hdl/projects/pulsar_adc/index.html
+
+To keep up with SPI offloading transfer speeds, the ADC must be connected either
+in 3-wire turbo mode or in 3-wire without busy indicator mode and have SPI
+controller CS line connected to the CNV pin.
+
+When set for SPI offload support, the IIO device will provide different
+interfaces.
+
+* Either ``in_voltage0_sampling_frequency`` or
+  ``in_voltage0-voltage1_sampling_frequency`` file is provided to allow setting
+  the sample rate.
+* IIO trigger device is not provided (no ``trigger`` directory).
+* ``timestamp`` channel is not provided.
+
+Also, because the ADC output has a one sample latency (delay) when the device is
+wired in "3-wire" mode and only one transfer per sample is done when using SPI
+offloading, the first data sample in the buffer is not valid because it contains
+the output of an earlier conversion result.
diff --git linux-libre-6.15-gnu/Documentation/iio/ad7380.rst linux-libre-6.16-gnu/Documentation/iio/ad7380.rst
index 24a92a1c4371..d51f9ee3e939 100644
--- linux-libre-6.15-gnu/Documentation/iio/ad7380.rst
+++ linux-libre-6.16-gnu/Documentation/iio/ad7380.rst
@@ -27,6 +27,7 @@ The following chips are supported by this driver:
 * `AD7386-4 <https://www.analog.com/en/products/ad7386-4.html>`_
 * `AD7387-4 <https://www.analog.com/en/products/ad7387-4.html>`_
 * `AD7388-4 <https://www.analog.com/en/products/ad7388-4.html>`_
+* `AD7389-4 <https://www.analog.com/en/products/ad7389-4.html>`_
 * `ADAQ4370-4 <https://www.analog.com/en/products/adaq4370-4.html>`_
 * `ADAQ4380-4 <https://www.analog.com/en/products/adaq4380-4.html>`_
 * `ADAQ4381-4 <https://www.analog.com/en/products/adaq4381-4.html>`_
@@ -50,6 +51,12 @@ ad7380-4
 ad7380-4 supports only an external reference voltage (2.5V to 3.3V). It must be
 declared in the device tree as ``refin-supply``.
 
+ad7389-4
+~~~~~~~~
+
+ad7389-4 supports only an internal reference voltage. ``refin-supply`` and
+``refio-supply`` properties are both omitted in this case.
+
 ADAQ devices
 ~~~~~~~~~~~~
 
diff --git linux-libre-6.15-gnu/Documentation/iio/ad7606.rst linux-libre-6.16-gnu/Documentation/iio/ad7606.rst
index 930199e03c67..5e02516bab40 100644
--- linux-libre-6.15-gnu/Documentation/iio/ad7606.rst
+++ linux-libre-6.16-gnu/Documentation/iio/ad7606.rst
@@ -26,6 +26,35 @@ SPI wiring modes
 These ADCs can output data on several SDO lines (1/2/4/8). The driver
 currently supports only 1 SDO line.
 
+SPI offload wiring
+------------------
+When used with a SPI offload, the supported wiring configuration is:
+
+.. code-block::
+
+    +-------------+         +-------------+
+    |        BUSY |-------->| TRIGGER     |
+    |          CS |<--------| CS          |
+    |             |         |             |
+    |     ADC     |         |     SPI     |
+    |             |         |             |
+    |         SDI |<--------| SDO         |
+    |       DOUTA |-------->| SDI         |
+    |        SCLK |<--------| SCLK        |
+    |             |         |             |
+    |             |         +-------------+
+    |      CONVST |<--------| PWM         |
+    +-------------+         +-------------+
+
+In this case, the ``pwms`` property is required.
+The ``#trigger-source-cells = <1>`` property is also required to connect back
+to the SPI offload. The SPI offload will have ``trigger-sources`` property
+with a cell to indicate the busy signal:
+``<&ad7606 AD4695_TRIGGER_EVENT_BUSY>``.
+
+.. seealso:: `SPI offload support`_
+
+
 Parallel wiring mode
 --------------------
 
@@ -123,6 +152,22 @@ Unimplemented features
 - CRC indication
 - Calibration
 
+SPI offload support
+===================
+
+To be able to achieve the maximum sample rate, the driver can be used with the
+`AXI SPI Engine`_ to provide SPI offload support.
+
+.. _AXI SPI Engine: https://analogdevicesinc.github.io/hdl/library/spi_engine/index.html
+
+When SPI offload is being used, some attributes will be different.
+
+* ``trigger`` directory is removed.
+* ``sampling_frequency`` attribute is added for setting the sample rate.
+* ``timestamp`` channel is removed.
+* Buffer data format may be different compared to when offload is not used,
+  e.g. the ``in_voltage0_type`` attribute.
+
 Device buffers
 ==============
 
diff --git linux-libre-6.15-gnu/Documentation/iio/index.rst linux-libre-6.16-gnu/Documentation/iio/index.rst
index bbb2edce8272..2d6afc5a8ed5 100644
--- linux-libre-6.15-gnu/Documentation/iio/index.rst
+++ linux-libre-6.16-gnu/Documentation/iio/index.rst
@@ -19,6 +19,7 @@ Industrial I/O Kernel Drivers
 .. toctree::
    :maxdepth: 1
 
+   ad3552r
    ad4000
    ad4030
    ad4695
diff --git linux-libre-6.15-gnu/Documentation/index.rst linux-libre-6.16-gnu/Documentation/index.rst
index f9f525f4c0dd..c0cf79a87c3a 100644
--- linux-libre-6.15-gnu/Documentation/index.rst
+++ linux-libre-6.16-gnu/Documentation/index.rst
@@ -84,7 +84,7 @@ which are kept separately from the kernel's own documentation.
 Firmware-related documentation
 ==============================
 The following holds information on the kernel's expectations regarding the
-platform firmwares.
+platform firmware.
 
 .. toctree::
    :maxdepth: 1
diff --git linux-libre-6.15-gnu/Documentation/input/devices/amijoy.rst linux-libre-6.16-gnu/Documentation/input/devices/amijoy.rst
index 8df7b11cd98d..a81e9de481c7 100644
--- linux-libre-6.15-gnu/Documentation/input/devices/amijoy.rst
+++ linux-libre-6.16-gnu/Documentation/input/devices/amijoy.rst
@@ -1,14 +1,15 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~
-Amiga joystick extensions
-~~~~~~~~~~~~~~~~~~~~~~~~~
+===============
+Amiga joysticks
+===============
 
+Pinouts
+=======
 
-Amiga 4-joystick parport extension
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Amiga 4-joystick parallel port extension
+----------------------------------------
 
 Parallel port pins:
 
-
 =====  ======== ====   ==========
 Pin    Meaning  Pin    Meaning
 =====  ======== ====   ==========
@@ -17,11 +18,11 @@ Pin    Meaning  Pin    Meaning
  4     Left1	 8     Left2
  5     Right1	 9     Right2
 13     Fire1	11     Fire2
-18     Gnd1	18     Gnd2
+19     Gnd1	18     Gnd2
 =====  ======== ====   ==========
 
-Amiga digital joystick pinout
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Amiga digital joystick
+----------------------
 
 === ============
 Pin Meaning
@@ -37,8 +38,8 @@ Pin Meaning
 9   Thumb button
 === ============
 
-Amiga mouse pinout
-~~~~~~~~~~~~~~~~~~
+Amiga mouse
+-----------
 
 === ============
 Pin Meaning
@@ -54,8 +55,8 @@ Pin Meaning
 9   Right button
 === ============
 
-Amiga analog joystick pinout
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Amiga analog joystick
+---------------------
 
 === ==============
 Pin Meaning
@@ -71,8 +72,8 @@ Pin Meaning
 9   Analog Y
 === ==============
 
-Amiga lightpen pinout
-~~~~~~~~~~~~~~~~~~~~~
+Amiga lightpen
+--------------
 
 === =============
 Pin Meaning
@@ -88,19 +89,23 @@ Pin Meaning
 9   Stylus button
 === =============
 
--------------------------------------------------------------------------------
+Register addresses
+==================
+
+JOY0DAT/JOY1DAT
+---------------
 
-======== === ==== ==== ====== ========================================
+======== === ==== ==== ====== ===========================================
 NAME     rev ADDR type chip   Description
-======== === ==== ==== ====== ========================================
-JOY0DAT      00A   R   Denise Joystick-mouse 0 data (left vert, horiz)
-JOY1DAT      00C   R   Denise Joystick-mouse 1 data (right vert,horiz)
-======== === ==== ==== ====== ========================================
+======== === ==== ==== ====== ===========================================
+JOY0DAT      00A   R   Denise Joystick-mouse 0 data (left vert., horiz.)
+JOY1DAT      00C   R   Denise Joystick-mouse 1 data (right vert., horiz.)
+======== === ==== ==== ====== ===========================================
 
         These addresses each read a 16 bit register. These in turn
         are loaded from the MDAT serial stream and are clocked in on
         the rising edge of SCLK. MLD output is used to parallel load
-        the external parallel-to-serial converter.This in turn is
+        the external parallel-to-serial converter. This in turn is
         loaded with the 4 quadrature inputs from each of two game
         controller ports (8 total) plus 8 miscellaneous control bits
         which are new for LISA and can be read in upper 8 bits of
@@ -108,7 +113,7 @@ JOY1DAT      00C   R   Denise Joystick-mouse 1 data (right vert,horiz)
 
         Register bits are as follows:
 
-        - Mouse counter usage (pins  1,3 =Yclock, pins 2,4 =Xclock)
+        - Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock)
 
 ======== === === === === === === === === ====== === === === === === === ===
     BIT#  15  14  13  12  11  10  09  08     07  06  05  04  03  02  01  00
@@ -123,7 +128,7 @@ JOY1DAT   Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
         clocked by 2 of the signals input from the mouse serial
         stream. Starting with first bit received:
 
-         +-------------------+-----------------------------------------+
+         +--------+----------+-----------------------------------------+
          | Serial | Bit Name | Description                             |
          +========+==========+=========================================+
          |   0    | M0H      | JOY0DAT Horizontal Clock                |
@@ -160,7 +165,8 @@ JOY1DAT   Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
          | Right      |  4   | X1                              |
          +------------+------+---------------------------------+
 
--------------------------------------------------------------------------------
+JOYTEST
+-------
 
 ========  === ==== ==== ====== =================================================
 NAME      rev ADDR type chip    Description
@@ -177,14 +183,15 @@ JOYTEST       036   W   Denise  Write to all 4  joystick-mouse counters at once.
   JOYxDAT  Y7  Y6  Y5  Y4  Y3  Y2  xx  xx     X7  X6  X5  X4  X3  X2  xx  xx
 ========= === === === === === === === === ====== === === === === === === ===
 
--------------------------------------------------------------------------------
+POT0DAT/POT1DAT
+---------------
 
-======= === ==== ==== ====== ========================================
+======= === ==== ==== ====== ===========================================
 NAME    rev ADDR type chip   Description
-======= === ==== ==== ====== ========================================
-POT0DAT  h  012   R   Paula  Pot counter data left pair (vert, horiz)
-POT1DAT  h  014   R   Paula  Pot counter data right pair (vert,horiz)
-======= === ==== ==== ====== ========================================
+======= === ==== ==== ====== ===========================================
+POT0DAT  h  012   R   Paula  Pot counter data left pair (vert., horiz.)
+POT1DAT  h  014   R   Paula  Pot counter data right pair (vert., horiz.)
+======= === ==== ==== ====== ===========================================
 
         These addresses each read a pair of 8 bit pot counters.
         (4 counters total). The bit assignment for both
@@ -213,12 +220,13 @@ POT1DAT  h  014   R   Paula  Pot counter data right pair (vert,horiz)
          +-------+------+-----+-----+-------+
 
          With normal (NTSC or PAL) horiz. line rate, the pots will
-         give a full scale (FF) reading with about 500kohms in one
-         frame time. With proportionally faster horiz line times,
+         give a full scale (FF) reading with about 500k ohm in one
+         frame time. With proportionally faster horiz. line times,
          the counters will count proportionally faster.
          This should be noted when doing variable beam displays.
 
--------------------------------------------------------------------------------
+POTGO
+-----
 
 ====== === ==== ==== ====== ================================================
 NAME   rev ADDR type chip   Description
@@ -227,7 +235,8 @@ POTGO      034   W   Paula  Pot port (4 bit) bi-direction and data, and pot
 			    counter start.
 ====== === ==== ==== ====== ================================================
 
--------------------------------------------------------------------------------
+POTINP
+------
 
 ====== === ==== ==== ====== ================================================
 NAME   rev ADDR type chip   Description
@@ -238,26 +247,26 @@ POTINP     016   R   Paula  Pot pin data read
         This register controls a 4 bit bi-direction I/O port
         that shares the same 4 pins as the 4 pot counters above.
 
-         +-------+----------+---------------------------------------------+
-         | BIT#  | FUNCTION | DESCRIPTION                                 |
-         +=======+==========+=============================================+
-         | 15    | OUTRY    | Output enable for Paula pin 33              |
-         +-------+----------+---------------------------------------------+
-         | 14    | DATRY    | I/O data Paula pin 33                       |
-         +-------+----------+---------------------------------------------+
-         | 13    | OUTRX    | Output enable for Paula pin 32              |
-         +-------+----------+---------------------------------------------+
-         | 12    | DATRX    | I/O data Paula pin 32                       |
-         +-------+----------+---------------------------------------------+
-         | 11    | OUTLY    | Out put enable for Paula pin 36             |
-         +-------+----------+---------------------------------------------+
-         | 10    | DATLY    | I/O data Paula pin 36                       |
-         +-------+----------+---------------------------------------------+
-         | 09    | OUTLX    | Output enable for Paula pin 35              |
-         +-------+----------+---------------------------------------------+
-         | 08    | DATLX    | I/O data  Paula pin 35                      |
-         +-------+----------+---------------------------------------------+
-         | 07-01 |   X      | Not used                                    |
-         +-------+----------+---------------------------------------------+
-         | 00    | START    | Start pots (dump capacitors,start counters) |
-         +-------+----------+---------------------------------------------+
+         +-------+----------+----------------------------------------------+
+         | BIT#  | FUNCTION | DESCRIPTION                                  |
+         +=======+==========+==============================================+
+         | 15    | OUTRY    | Output enable for Paula pin 33               |
+         +-------+----------+----------------------------------------------+
+         | 14    | DATRY    | I/O data Paula pin 33                        |
+         +-------+----------+----------------------------------------------+
+         | 13    | OUTRX    | Output enable for Paula pin 32               |
+         +-------+----------+----------------------------------------------+
+         | 12    | DATRX    | I/O data Paula pin 32                        |
+         +-------+----------+----------------------------------------------+
+         | 11    | OUTLY    | Out put enable for Paula pin 36              |
+         +-------+----------+----------------------------------------------+
+         | 10    | DATLY    | I/O data Paula pin 36                        |
+         +-------+----------+----------------------------------------------+
+         | 09    | OUTLX    | Output enable for Paula pin 35               |
+         +-------+----------+----------------------------------------------+
+         | 08    | DATLX    | I/O data  Paula pin 35                       |
+         +-------+----------+----------------------------------------------+
+         | 07-01 |   X      | Not used                                     |
+         +-------+----------+----------------------------------------------+
+         | 00    | START    | Start pots (dump capacitors, start counters) |
+         +-------+----------+----------------------------------------------+
diff --git linux-libre-6.15-gnu/Documentation/kbuild/gendwarfksyms.rst linux-libre-6.16-gnu/Documentation/kbuild/gendwarfksyms.rst
index e4beaae7e456..ed366250a54e 100644
--- linux-libre-6.15-gnu/Documentation/kbuild/gendwarfksyms.rst
+++ linux-libre-6.16-gnu/Documentation/kbuild/gendwarfksyms.rst
@@ -2,8 +2,8 @@
 DWARF module versioning
 =======================
 
-1. Introduction
-===============
+Introduction
+============
 
 When CONFIG_MODVERSIONS is enabled, symbol versions for modules
 are typically calculated from preprocessed source code using the
@@ -14,8 +14,8 @@ selected, **gendwarfksyms** is used instead to calculate symbol versions
 from the DWARF debugging information, which contains the necessary
 details about the final module ABI.
 
-1.1. Usage
-==========
+Usage
+-----
 
 gendwarfksyms accepts a list of object files on the command line, and a
 list of symbol names (one per line) in standard input::
@@ -33,8 +33,8 @@ list of symbol names (one per line) in standard input::
           -h, --help           Print this message
 
 
-2. Type information availability
-================================
+Type information availability
+=============================
 
 While symbols are typically exported in the same translation unit (TU)
 where they're defined, it's also perfectly fine for a TU to export
@@ -56,8 +56,8 @@ type for calculating symbol versions even if the symbol is defined
 elsewhere. The name of the symbol pointer is expected to start with
 `__gendwarfksyms_ptr_`, followed by the name of the exported symbol.
 
-3. Symtypes output format
-=========================
+Symtypes output format
+======================
 
 Similarly to genksyms, gendwarfksyms supports writing a symtypes
 file for each processed object that contain types for exported
@@ -85,8 +85,8 @@ produces C-style type strings, gendwarfksyms uses the same simple parsed
 DWARF format produced by **--dump-dies**, but with type references
 instead of fully expanded strings.
 
-4. Maintaining a stable kABI
-============================
+Maintaining a stable kABI
+=========================
 
 Distribution maintainers often need the ability to make ABI compatible
 changes to kernel data structures due to LTS updates or backports. Using
@@ -104,8 +104,8 @@ for source code annotation. Note that as these features are only used to
 transform the inputs for symbol versioning, the user is responsible for
 ensuring that their changes actually won't break the ABI.
 
-4.1. kABI rules
-===============
+kABI rules
+----------
 
 kABI rules allow distributions to fine-tune certain parts
 of gendwarfksyms output and thus control how symbol
@@ -125,22 +125,25 @@ the rules. The fields are as follows:
   qualified name of the DWARF Debugging Information Entry (DIE).
 - `value`: Provides rule-specific data.
 
-The following helper macro, for example, can be used to specify rules
+The following helper macros, for example, can be used to specify rules
 in the source code::
 
-	#define __KABI_RULE(hint, target, value)                             \
-		static const char __PASTE(__gendwarfksyms_rule_,             \
+	#define ___KABI_RULE(hint, target, value)			    \
+		static const char __PASTE(__gendwarfksyms_rule_,	     \
 					  __COUNTER__)[] __used __aligned(1) \
 			__section(".discard.gendwarfksyms.kabi_rules") =     \
-				"1\0" #hint "\0" #target "\0" #value
+				"1\0" #hint "\0" target "\0" value
+
+	#define __KABI_RULE(hint, target, value) \
+		___KABI_RULE(hint, #target, #value)
 
 
 Currently, only the rules discussed in this section are supported, but
 the format is extensible enough to allow further rules to be added as
 need arises.
 
-4.1.1. Managing definition visibility
-=====================================
+Managing definition visibility
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 A declaration can change into a full definition when additional includes
 are pulled into the translation unit. This changes the versions of any
@@ -168,8 +171,8 @@ Example usage::
 
 	KABI_DECLONLY(s);
 
-4.1.2. Adding enumerators
-=========================
+Adding enumerators
+~~~~~~~~~~~~~~~~~~
 
 For enums, all enumerators and their values are included in calculating
 symbol versions, which becomes a problem if we later need to add more
@@ -223,8 +226,89 @@ Example usage::
 	KABI_ENUMERATOR_IGNORE(e, C);
 	KABI_ENUMERATOR_VALUE(e, LAST, 2);
 
-4.3. Adding structure members
-=============================
+Managing structure size changes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A data structure can be partially opaque to modules if its allocation is
+handled by the core kernel, and modules only need to access some of its
+members. In this situation, it's possible to append new members to the
+structure without breaking the ABI, as long as the layout for the original
+members remains unchanged.
+
+To append new members, we can hide them from symbol versioning as
+described in section :ref:`Hiding members <hiding_members>`, but we can't
+hide the increase in structure size. The `byte_size` rule allows us to
+override the structure size used for symbol versioning.
+
+The rule fields are expected to be as follows:
+
+- `type`: "byte_size"
+- `target`: The fully qualified name of the target data structure
+  (as shown in **--dump-dies** output).
+- `value`: A positive decimal number indicating the structure size
+  in bytes.
+
+Using the `__KABI_RULE` macro, this rule can be defined as::
+
+        #define KABI_BYTE_SIZE(fqn, value) \
+                __KABI_RULE(byte_size, fqn, value)
+
+Example usage::
+
+	struct s {
+                /* Unchanged original members */
+		unsigned long a;
+                void *p;
+
+                /* Appended new members */
+                KABI_IGNORE(0, unsigned long n);
+	};
+
+	KABI_BYTE_SIZE(s, 16);
+
+Overriding type strings
+~~~~~~~~~~~~~~~~~~~~~~~
+
+In rare situations where distributions must make significant changes to
+otherwise opaque data structures that have inadvertently been included
+in the published ABI, keeping symbol versions stable using the more
+targeted kABI rules can become tedious. The `type_string` rule allows us
+to override the full type string for a type or a symbol, and even add
+types for versioning that no longer exist in the kernel.
+
+The rule fields are expected to be as follows:
+
+- `type`: "type_string"
+- `target`: The fully qualified name of the target data structure
+  (as shown in **--dump-dies** output) or symbol.
+- `value`: A valid type string (as shown in **--symtypes**) output)
+  to use instead of the real type.
+
+Using the `__KABI_RULE` macro, this rule can be defined as::
+
+	#define KABI_TYPE_STRING(type, str) \
+		___KABI_RULE("type_string", type, str)
+
+Example usage::
+
+	/* Override type for a structure */
+	KABI_TYPE_STRING("s#s",
+		"structure_type s { "
+			"member base_type int byte_size(4) "
+				"encoding(5) n "
+			"data_member_location(0) "
+		"} byte_size(8)");
+
+	/* Override type for a symbol */
+	KABI_TYPE_STRING("my_symbol", "variable s#s");
+
+The `type_string` rule should be used only as a last resort if maintaining
+a stable symbol versions cannot be reasonably achieved using other
+means. Overriding a type string increases the risk of actual ABI breakages
+going unnoticed as it hides all changes to the type.
+
+Adding structure members
+------------------------
 
 Perhaps the most common ABI compatible change is adding a member to a
 kernel data structure. When changes to a structure are anticipated,
@@ -237,8 +321,8 @@ natural method. This section describes gendwarfksyms support for using
 reserved space in data structures and hiding members that don't change
 the ABI when calculating symbol versions.
 
-4.3.1. Reserving space and replacing members
-============================================
+Reserving space and replacing members
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Space is typically reserved for later use by appending integer types, or
 arrays, to the end of the data structure, but any type can be used. Each
@@ -276,8 +360,10 @@ The examples include `KABI_(RESERVE|USE|REPLACE)*` macros that help
 simplify the process and also ensure the replacement member is correctly
 aligned and its size won't exceed the reserved space.
 
-4.3.2. Hiding members
-=====================
+.. _hiding_members:
+
+Hiding members
+~~~~~~~~~~~~~~
 
 Predicting which structures will require changes during the support
 timeframe isn't always possible, in which case one might have to resort
@@ -305,4 +391,5 @@ member to a union where one of the fields has a name starting with
                 unsigned long b;
         };
 
-With **--stable**, both versions produce the same symbol version.
+With **--stable**, both versions produce the same symbol version. The
+examples include a `KABI_IGNORE` macro to simplify the code.
diff --git linux-libre-6.15-gnu/Documentation/kbuild/makefiles.rst linux-libre-6.16-gnu/Documentation/kbuild/makefiles.rst
index 3b9a8bc671e2..8aef3650c1f3 100644
--- linux-libre-6.15-gnu/Documentation/kbuild/makefiles.rst
+++ linux-libre-6.16-gnu/Documentation/kbuild/makefiles.rst
@@ -291,6 +291,10 @@ Example::
   # arch/x86/kernel/Makefile
   extra-y	+= vmlinux.lds
 
+extra-y is now deprecated because this is equivalent to:
+
+  always-$(KBUILD_BUILTIN) += vmlinux.lds
+
 $(extra-y) should only contain targets needed for vmlinux.
 
 Kbuild skips extra-y when vmlinux is apparently not a final goal.
@@ -625,10 +629,10 @@ gcc-min-version
 
   Example::
 
-    cflags-$(call gcc-min-version, 70100) := -foo
+    cflags-$(call gcc-min-version, 110100) := -foo
 
   In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and
-  $(CONFIG_GCC_VERSION) is >= 7.1.
+  $(CONFIG_GCC_VERSION) is >= 11.1.
 
 clang-min-version
   clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater
diff --git linux-libre-6.15-gnu/Documentation/leds/index.rst linux-libre-6.16-gnu/Documentation/leds/index.rst
index 0ab0a2128a11..76fae171039c 100644
--- linux-libre-6.15-gnu/Documentation/leds/index.rst
+++ linux-libre-6.16-gnu/Documentation/leds/index.rst
@@ -28,5 +28,5 @@ LEDs
    leds-mlxcpld
    leds-mt6370-rgb
    leds-sc27xx
-   leds-st1202.rst
+   leds-st1202
    leds-qcom-lpg
diff --git linux-libre-6.15-gnu/Documentation/leds/leds-class-multicolor.rst linux-libre-6.16-gnu/Documentation/leds/leds-class-multicolor.rst
index c57b98bfd387..c6b47b4093c4 100644
--- linux-libre-6.15-gnu/Documentation/leds/leds-class-multicolor.rst
+++ linux-libre-6.16-gnu/Documentation/leds/leds-class-multicolor.rst
@@ -18,24 +18,28 @@ array.  These files are children under the LED parent node created by the
 led_class framework.  The led_class framework is documented in led-class.rst
 within this documentation directory.
 
-Each colored LED will be indexed under the multi_* files. The order of the
-colors will be arbitrary. The multi_index file can be read to determine the
+Each colored LED will be indexed under the ``multi_*`` files. The order of the
+colors will be arbitrary. The ``multi_index`` file can be read to determine the
 color name to indexed value.
 
-The multi_index file is an array that contains the string list of the colors as
-they are defined in each multi_* array file.
+The ``multi_index`` file is an array that contains the string list of the colors as
+they are defined in each ``multi_*`` array file.
 
-The multi_intensity is an array that can be read or written to for the
+The ``multi_intensity`` is an array that can be read or written to for the
 individual color intensities.  All elements within this array must be written in
 order for the color LED intensities to be updated.
 
 Directory Layout Example
 ========================
-root:/sys/class/leds/multicolor:status# ls -lR
--rw-r--r--    1 root     root          4096 Oct 19 16:16 brightness
--r--r--r--    1 root     root          4096 Oct 19 16:16 max_brightness
--r--r--r--    1 root     root          4096 Oct 19 16:16 multi_index
--rw-r--r--    1 root     root          4096 Oct 19 16:16 multi_intensity
+.. code-block:: console
+
+    root:/sys/class/leds/multicolor:status# ls -lR
+    -rw-r--r--    1 root     root          4096 Oct 19 16:16 brightness
+    -r--r--r--    1 root     root          4096 Oct 19 16:16 max_brightness
+    -r--r--r--    1 root     root          4096 Oct 19 16:16 multi_index
+    -rw-r--r--    1 root     root          4096 Oct 19 16:16 multi_intensity
+
+..
 
 Multicolor Class Brightness Control
 ===================================
@@ -43,27 +47,31 @@ The brightness level for each LED is calculated based on the color LED
 intensity setting divided by the global max_brightness setting multiplied by
 the requested brightness.
 
-led_brightness = brightness * multi_intensity/max_brightness
+``led_brightness = brightness * multi_intensity/max_brightness``
 
 Example:
 A user first writes the multi_intensity file with the brightness levels
 for each LED that are necessary to achieve a certain color output from a
 multicolor LED group.
 
-cat /sys/class/leds/multicolor:status/multi_index
-green blue red
+.. code-block:: console
+
+    # cat /sys/class/leds/multicolor:status/multi_index
+    green blue red
 
-echo 43 226 138 > /sys/class/leds/multicolor:status/multi_intensity
+    # echo 43 226 138 > /sys/class/leds/multicolor:status/multi_intensity
 
-red -
-	intensity = 138
-	max_brightness = 255
-green -
-	intensity = 43
-	max_brightness = 255
-blue -
-	intensity = 226
-	max_brightness = 255
+    red -
+    	intensity = 138
+    	max_brightness = 255
+    green -
+    	intensity = 43
+    	max_brightness = 255
+    blue -
+    	intensity = 226
+    	max_brightness = 255
+
+..
 
 The user can control the brightness of that multicolor LED group by writing the
 global 'brightness' control.  Assuming a max_brightness of 255 the user
@@ -71,16 +79,28 @@ may want to dim the LED color group to half.  The user would write a value of
 128 to the global brightness file then the values written to each LED will be
 adjusted base on this value.
 
-cat /sys/class/leds/multicolor:status/max_brightness
-255
-echo 128 > /sys/class/leds/multicolor:status/brightness
+.. code-block:: console
+
+    # cat /sys/class/leds/multicolor:status/max_brightness
+    255
+    # echo 128 > /sys/class/leds/multicolor:status/brightness
 
-adjusted_red_value = 128 * 138/255 = 69
-adjusted_green_value = 128 * 43/255 = 21
-adjusted_blue_value = 128 * 226/255 = 113
+..
+
+.. code-block:: none
+
+    adjusted_red_value = 128 * 138/255 = 69
+    adjusted_green_value = 128 * 43/255 = 21
+    adjusted_blue_value = 128 * 226/255 = 113
+
+..
 
 Reading the global brightness file will return the current brightness value of
 the color LED group.
 
-cat /sys/class/leds/multicolor:status/brightness
-128
+.. code-block:: console
+
+    # cat /sys/class/leds/multicolor:status/brightness
+    128
+
+..
diff --git linux-libre-6.15-gnu/Documentation/misc-devices/amd-sbi.rst linux-libre-6.16-gnu/Documentation/misc-devices/amd-sbi.rst
new file mode 100644
index 000000000000..5648fc6ec572
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/misc-devices/amd-sbi.rst
@@ -0,0 +1,99 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+AMD SIDE BAND interface
+=======================
+
+Some AMD Zen based processors supports system management
+functionality via side-band interface (SBI) called
+Advanced Platform Management Link (APML). APML is an I2C/I3C
+based 2-wire processor target interface. APML is used to
+communicate with the Remote Management Interface
+(SB Remote Management Interface (SB-RMI)
+and SB Temperature Sensor Interface (SB-TSI)).
+
+More details on the interface can be found in chapter
+"5 Advanced Platform Management Link (APML)" of the family/model PPR [1]_.
+
+.. [1] https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/55898_B1_pub_0_50.zip
+
+
+SBRMI device
+============
+
+apml_sbrmi driver under the drivers/misc/amd-sbi creates miscdevice
+/dev/sbrmi-* to let user space programs run APML mailbox, CPUID,
+MCAMSR and register xfer commands.
+
+Register sets is common across APML protocols. IOCTL is providing synchronization
+among protocols as transactions may create race condition.
+
+$ ls -al /dev/sbrmi-3c
+crw-------    1 root     root       10,  53 Jul 10 11:13 /dev/sbrmi-3c
+
+apml_sbrmi driver registers hwmon sensors for monitoring power_cap_max,
+current power consumption and managing power_cap.
+
+Characteristics of the dev node:
+ * Differnet xfer protocols are defined:
+	* Mailbox
+	* CPUID
+	* MCA_MSR
+	* Register xfer
+
+Access restrictions:
+ * Only root user is allowed to open the file.
+ * APML Mailbox messages and Register xfer access are read-write,
+ * CPUID and MCA_MSR access is read-only.
+
+Driver IOCTLs
+=============
+
+.. c:macro:: SBRMI_IOCTL_MBOX_CMD
+.. kernel-doc:: include/uapi/misc/amd-apml.h
+   :doc: SBRMI_IOCTL_MBOX_CMD
+.. c:macro:: SBRMI_IOCTL_CPUID_CMD
+.. kernel-doc:: include/uapi/misc/amd-apml.h
+   :doc: SBRMI_IOCTL_CPUID_CMD
+.. c:macro:: SBRMI_IOCTL_MCAMSR_CMD
+.. kernel-doc:: include/uapi/misc/amd-apml.h
+   :doc: SBRMI_IOCTL_MCAMSR_CMD
+.. c:macro:: SBRMI_IOCTL_REG_XFER_CMD
+.. kernel-doc:: include/uapi/misc/amd-apml.h
+   :doc: SBRMI_IOCTL_REG_XFER_CMD
+
+User-space usage
+================
+
+To access side band interface from a C program.
+First, user need to include the headers::
+
+  #include <uapi/misc/amd-apml.h>
+
+Which defines the supported IOCTL and data structure to be passed
+from the user space.
+
+Next thing, open the device file, as follows::
+
+  int file;
+
+  file = open("/dev/sbrmi-*", O_RDWR);
+  if (file < 0) {
+    /* ERROR HANDLING */
+    exit(1);
+  }
+
+The following IOCTLs are defined:
+
+``#define SB_BASE_IOCTL_NR      	0xF9``
+``#define SBRMI_IOCTL_MBOX_CMD		_IOWR(SB_BASE_IOCTL_NR, 0, struct apml_mbox_msg)``
+``#define SBRMI_IOCTL_CPUID_CMD		_IOWR(SB_BASE_IOCTL_NR, 1, struct apml_cpuid_msg)``
+``#define SBRMI_IOCTL_MCAMSR_CMD	_IOWR(SB_BASE_IOCTL_NR, 2, struct apml_mcamsr_msg)``
+``#define SBRMI_IOCTL_REG_XFER_CMD	_IOWR(SB_BASE_IOCTL_NR, 3, struct apml_reg_xfer_msg)``
+
+
+User space C-APIs are made available by esmi_oob_library, hosted at
+[2]_ which is provided by the E-SMS project [3]_.
+
+.. [2] https://github.com/amd/esmi_oob_library
+.. [3] https://www.amd.com/en/developer/e-sms.html
diff --git linux-libre-6.15-gnu/Documentation/misc-devices/index.rst linux-libre-6.16-gnu/Documentation/misc-devices/index.rst
index 8c5b226d8313..081e79415e38 100644
--- linux-libre-6.15-gnu/Documentation/misc-devices/index.rst
+++ linux-libre-6.16-gnu/Documentation/misc-devices/index.rst
@@ -12,6 +12,7 @@ fit into other categories.
    :maxdepth: 2
 
    ad525x_dpot
+   amd-sbi
    apds990x
    bh1770glc
    c2port
diff --git linux-libre-6.15-gnu/Documentation/misc-devices/lis3lv02d.rst linux-libre-6.16-gnu/Documentation/misc-devices/lis3lv02d.rst
index 959bd2b822cf..6b3b7405ebdf 100644
--- linux-libre-6.15-gnu/Documentation/misc-devices/lis3lv02d.rst
+++ linux-libre-6.16-gnu/Documentation/misc-devices/lis3lv02d.rst
@@ -22,10 +22,10 @@ sporting the feature officially called "HP Mobile Data Protection System 3D" or
 models (full list can be found in drivers/platform/x86/hp_accel.c) will have
 their axis automatically oriented on standard way (eg: you can directly play
 neverball). The accelerometer data is readable via
-/sys/devices/platform/lis3lv02d. Reported values are scaled
+/sys/devices/faux/lis3lv02d. Reported values are scaled
 to mg values (1/1000th of earth gravity).
 
-Sysfs attributes under /sys/devices/platform/lis3lv02d/:
+Sysfs attributes under /sys/devices/faux/lis3lv02d/:
 
 position
       - 3D position that the accelerometer reports. Format: "(x,y,z)"
@@ -85,7 +85,7 @@ the accelerometer are converted into a "standard" organisation of the axes
 If your laptop model is not recognized (cf "dmesg"), you can send an
 email to the maintainer to add it to the database.  When reporting a new
 laptop, please include the output of "dmidecode" plus the value of
-/sys/devices/platform/lis3lv02d/position in these four cases.
+/sys/devices/faux/lis3lv02d/position in these four cases.
 
 Q&A
 ---
diff --git linux-libre-6.15-gnu/Documentation/mm/damon/design.rst linux-libre-6.16-gnu/Documentation/mm/damon/design.rst
index f12d33749329..ddc50db3afa4 100644
--- linux-libre-6.15-gnu/Documentation/mm/damon/design.rst
+++ linux-libre-6.16-gnu/Documentation/mm/damon/design.rst
@@ -54,7 +54,7 @@ monitoring are address-space dependent.
 DAMON consolidates these implementations in a layer called DAMON Operations
 Set, and defines the interface between it and the upper layer.  The upper layer
 is dedicated for DAMON's core logics including the mechanism for control of the
-monitoring accruracy and the overhead.
+monitoring accuracy and the overhead.
 
 Hence, DAMON can easily be extended for any address space and/or available
 hardware features by configuring the core logic to use the appropriate
@@ -550,10 +550,10 @@ aggressiveness (the quota) of the corresponding scheme.  For example, if DAMOS
 is under achieving the goal, DAMOS automatically increases the quota.  If DAMOS
 is over achieving the goal, it decreases the quota.
 
-The goal can be specified with three parameters, namely ``target_metric``,
-``target_value``, and ``current_value``.  The auto-tuning mechanism tries to
-make ``current_value`` of ``target_metric`` be same to ``target_value``.
-Currently, two ``target_metric`` are provided.
+The goal can be specified with four parameters, namely ``target_metric``,
+``target_value``, ``current_value`` and ``nid``.  The auto-tuning mechanism
+tries to make ``current_value`` of ``target_metric`` be same to
+``target_value``.
 
 - ``user_input``: User-provided value.  Users could use any metric that they
   has interest in for the value.  Use space main workload's latency or
@@ -565,6 +565,11 @@ Currently, two ``target_metric`` are provided.
   in microseconds that measured from last quota reset to next quota reset.
   DAMOS does the measurement on its own, so only ``target_value`` need to be
   set by users at the initial time.  In other words, DAMOS does self-feedback.
+- ``node_mem_used_bp``: Specific NUMA node's used memory ratio in bp (1/10,000).
+- ``node_mem_free_bp``: Specific NUMA node's free memory ratio in bp (1/10,000).
+
+``nid`` is optionally required for only ``node_mem_used_bp`` and
+``node_mem_free_bp`` to point the specific NUMA node.
 
 To know how user-space can set the tuning goal metric, the target value, and/or
 the current value via :ref:`DAMON sysfs interface <sysfs_interface>`, refer to
diff --git linux-libre-6.15-gnu/Documentation/mm/damon/index.rst linux-libre-6.16-gnu/Documentation/mm/damon/index.rst
index 5a3359704cce..31c1fa955b3d 100644
--- linux-libre-6.15-gnu/Documentation/mm/damon/index.rst
+++ linux-libre-6.16-gnu/Documentation/mm/damon/index.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-==========================
-DAMON: Data Access MONitor
-==========================
+================================================================
+DAMON: Data Access MONitoring and Access-aware System Operations
+================================================================
 
 DAMON is a Linux kernel subsystem that provides a framework for data access
 monitoring and the monitoring results based system operations.  The core
diff --git linux-libre-6.15-gnu/Documentation/netlink/genetlink-c.yaml linux-libre-6.16-gnu/Documentation/netlink/genetlink-c.yaml
index 96fa1f1522ed..5a234e9b5fa2 100644
--- linux-libre-6.15-gnu/Documentation/netlink/genetlink-c.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/genetlink-c.yaml
@@ -148,6 +148,9 @@ properties:
         attr-max-name:
           description: The explicit name for last member of attribute enum.
           type: string
+        header:
+          description: For C-compatible languages, header which already defines this attribute set.
+          type: string
         # End genetlink-c
         attributes:
           description: List of attributes in the space.
diff --git linux-libre-6.15-gnu/Documentation/netlink/genetlink-legacy.yaml linux-libre-6.16-gnu/Documentation/netlink/genetlink-legacy.yaml
index a8c5b521937d..b29d62eefa16 100644
--- linux-libre-6.15-gnu/Documentation/netlink/genetlink-legacy.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/genetlink-legacy.yaml
@@ -6,6 +6,9 @@ $schema: https://json-schema.org/draft-07/schema
 
 # Common defines
 $defs:
+  name:
+    type: string
+    pattern: ^[0-9a-z-]+$
   uint:
     type: integer
     minimum: 0
@@ -76,7 +79,7 @@ properties:
       additionalProperties: False
       properties:
         name:
-          type: string
+          $ref: '#/$defs/name'
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
@@ -103,7 +106,7 @@ properties:
                 additionalProperties: False
                 properties:
                   name:
-                    type: string
+                    $ref: '#/$defs/name'
                   value:
                     type: integer
                   doc:
@@ -132,7 +135,7 @@ properties:
             additionalProperties: False
             properties:
               name:
-                type: string
+                $ref: '#/$defs/name'
               type:
                 description: The netlink attribute type
                 enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string, binary ]
@@ -169,7 +172,7 @@ properties:
         name:
           description: |
             Name used when referring to this space in other definitions, not used outside of the spec.
-          type: string
+          $ref: '#/$defs/name'
         name-prefix:
           description: |
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
@@ -193,6 +196,9 @@ properties:
         attr-max-name:
           description: The explicit name for last member of attribute enum.
           type: string
+        header:
+          description: For C-compatible languages, header which already defines this attribute set.
+          type: string
         # End genetlink-c
         attributes:
           description: List of attributes in the space.
@@ -203,7 +209,7 @@ properties:
             additionalProperties: False
             properties:
               name:
-                type: string
+                $ref: '#/$defs/name'
               type: &attr-type
                 description: The netlink attribute type
                 enum: [ unused, pad, flag, binary, bitfield32,
@@ -345,7 +351,7 @@ properties:
           properties:
             name:
               description: Name of the operation, also defining its C enum value in uAPI.
-              type: string
+              $ref: '#/$defs/name'
             doc:
               description: Documentation for the command.
               type: string
diff --git linux-libre-6.15-gnu/Documentation/netlink/genetlink.yaml linux-libre-6.16-gnu/Documentation/netlink/genetlink.yaml
index 40efbbad76ab..7b1ec153e834 100644
--- linux-libre-6.15-gnu/Documentation/netlink/genetlink.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/genetlink.yaml
@@ -6,6 +6,9 @@ $schema: https://json-schema.org/draft-07/schema
 
 # Common defines
 $defs:
+  name:
+    type: string
+    pattern: ^[0-9a-z-]+$
   uint:
     type: integer
     minimum: 0
@@ -29,7 +32,7 @@ additionalProperties: False
 properties:
   name:
     description: Name of the genetlink family.
-    type: string
+    $ref: '#/$defs/name'
   doc:
     type: string
   protocol:
@@ -48,7 +51,7 @@ properties:
       additionalProperties: False
       properties:
         name:
-          type: string
+          $ref: '#/$defs/name'
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
@@ -75,7 +78,7 @@ properties:
                 additionalProperties: False
                 properties:
                   name:
-                    type: string
+                    $ref: '#/$defs/name'
                   value:
                     type: integer
                   doc:
@@ -96,7 +99,7 @@ properties:
         name:
           description: |
             Name used when referring to this space in other definitions, not used outside of the spec.
-          type: string
+          $ref: '#/$defs/name'
         name-prefix:
           description: |
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
@@ -121,7 +124,7 @@ properties:
             additionalProperties: False
             properties:
               name:
-                type: string
+                $ref: '#/$defs/name'
               type: &attr-type
                 enum: [ unused, pad, flag, binary,
                         uint, sint, u8, u16, u32, u64, s8, s16, s32, s64,
@@ -243,7 +246,7 @@ properties:
           properties:
             name:
               description: Name of the operation, also defining its C enum value in uAPI.
-              type: string
+              $ref: '#/$defs/name'
             doc:
               description: Documentation for the command.
               type: string
@@ -327,7 +330,7 @@ properties:
             name:
               description: |
                 The name for the group, used to form the define and the value of the define.
-              type: string
+              $ref: '#/$defs/name'
             flags: *cmd_flags
 
   kernel-family:
diff --git linux-libre-6.15-gnu/Documentation/netlink/netlink-raw.yaml linux-libre-6.16-gnu/Documentation/netlink/netlink-raw.yaml
index 1b0772c8e333..246fa07bccf6 100644
--- linux-libre-6.15-gnu/Documentation/netlink/netlink-raw.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/netlink-raw.yaml
@@ -6,6 +6,12 @@ $schema: https://json-schema.org/draft-07/schema
 
 # Common defines
 $defs:
+  name:
+    type: string
+    pattern: ^[0-9a-z-]+$
+  name-cap:
+    type: string
+    pattern: ^[0-9a-zA-Z-]+$
   uint:
     type: integer
     minimum: 0
@@ -71,7 +77,7 @@ properties:
       additionalProperties: False
       properties:
         name:
-          type: string
+          $ref: '#/$defs/name'
         header:
           description: For C-compatible languages, header which already defines this value.
           type: string
@@ -98,7 +104,7 @@ properties:
                 additionalProperties: False
                 properties:
                   name:
-                    type: string
+                    $ref: '#/$defs/name'
                   value:
                     type: integer
                   doc:
@@ -124,7 +130,7 @@ properties:
             additionalProperties: False
             properties:
               name:
-                type: string
+                $ref: '#/$defs/name-cap'
               type:
                 description: |
                   The netlink attribute type. Members of type 'binary' or 'pad'
@@ -183,7 +189,7 @@ properties:
         name:
           description: |
             Name used when referring to this space in other definitions, not used outside of the spec.
-          type: string
+          $ref: '#/$defs/name'
         name-prefix:
           description: |
             Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
@@ -207,6 +213,9 @@ properties:
         attr-max-name:
           description: The explicit name for last member of attribute enum.
           type: string
+        header:
+          description: For C-compatible languages, header which already defines this attribute set.
+          type: string
         # End genetlink-c
         attributes:
           description: List of attributes in the space.
@@ -217,7 +226,7 @@ properties:
             additionalProperties: False
             properties:
               name:
-                type: string
+                $ref: '#/$defs/name'
               type: &attr-type
                 description: The netlink attribute type
                 enum: [ unused, pad, flag, binary, bitfield32,
@@ -405,7 +414,7 @@ properties:
           properties:
             name:
               description: Name of the operation, also defining its C enum value in uAPI.
-              type: string
+              $ref: '#/$defs/name'
             doc:
               description: Documentation for the command.
               type: string
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/devlink.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/devlink.yaml
index bd9726269b4f..38ddc04f9e6d 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/devlink.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/devlink.yaml
@@ -38,15 +38,15 @@ definitions:
       -
         name: dsa
       -
-        name: pci_pf
+        name: pci-pf
       -
-        name: pci_vf
+        name: pci-vf
       -
         name: virtual
       -
         name: unused
       -
-        name: pci_sf
+        name: pci-sf
   -
     type: enum
     name: port-fn-state
@@ -202,6 +202,28 @@ definitions:
         name: exception
       -
         name: control
+  -
+    type: enum
+    name: var-attr-type
+    entries:
+      -
+        name: u8
+        value: 1
+      -
+        name: u16
+      -
+        name: u32
+      -
+        name: u64
+      -
+        name: string
+      -
+        name: flag
+      -
+        name: nul-string
+        value: 10
+      -
+        name: binary
 
 attribute-sets:
   -
@@ -498,6 +520,7 @@ attribute-sets:
       -
         name: param-type
         type: u8
+        enum: var-attr-type
 
       # TODO: fill in the attributes in between
 
@@ -592,6 +615,7 @@ attribute-sets:
       -
         name: fmsg-obj-value-type
         type: u8
+        enum: var-attr-type
 
       # TODO: fill in the attributes in between
 
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/dpll.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/dpll.yaml
index 8feefeae5376..f434140b538e 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/dpll.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/dpll.yaml
@@ -188,7 +188,7 @@ definitions:
     value: 10000
   -
     type: const
-    name: pin-frequency-77_5-khz
+    name: pin-frequency-77-5-khz
     value: 77500
   -
     type: const
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/ethtool.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/ethtool.yaml
index c650cd3dcb80..348c6ad548f5 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/ethtool.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/ethtool.yaml
@@ -7,6 +7,9 @@ protocol: genetlink-legacy
 doc: Partial family for Ethtool Netlink.
 uapi-header: linux/ethtool_netlink_generated.h
 
+c-family-name: ethtool-genl-name
+c-version-name: ethtool-genl-version
+
 definitions:
   -
     name: udp-tunnel-type
@@ -45,7 +48,7 @@ definitions:
         name: started
         doc: The firmware flashing process has started.
       -
-        name: in_progress
+        name: in-progress
         doc: The firmware flashing process is in progress.
       -
         name: completed
@@ -98,6 +101,24 @@ definitions:
     name: tcp-data-split
     type: enum
     entries: [ unknown, disabled, enabled ]
+  -
+    name: hwtstamp-source
+    doc: Source of the hardware timestamp
+    enum-name: hwtstamp-source
+    name-prefix: hwtstamp-source-
+    type: enum
+    entries:
+      -
+        name: netdev
+        doc: |
+          Hardware timestamp comes from a MAC or a device
+          which has MAC and PHY integrated
+        value: 1
+      -
+        name: phylib
+        doc: |
+          Hardware timestamp comes from one PHY device
+          of the network topology
 
 attribute-sets:
   -
@@ -896,6 +917,13 @@ attribute-sets:
         name: hwtstamp-provider
         type: nest
         nested-attributes: ts-hwtstamp-provider
+      -
+        name: hwtstamp-source
+        type: u32
+        enum: hwtstamp-source
+      -
+        name: hwtstamp-phyindex
+        type: u32
   -
     name: cable-result
     attr-cnt-name: __ethtool-a-cable-result-cnt
@@ -1394,7 +1422,7 @@ attribute-sets:
         name: hkey
         type: binary
       -
-        name: input_xfrm
+        name: input-xfrm
         type: u32
       -
         name: start-context
@@ -1981,6 +2009,8 @@ operations:
             - phc-index
             - stats
             - hwtstamp-provider
+            - hwtstamp-source
+            - hwtstamp-phyindex
       dump: *tsinfo-get-op
     -
       name: cable-test-act
@@ -2208,7 +2238,7 @@ operations:
             - hfunc
             - indir
             - hkey
-            - input_xfrm
+            - input-xfrm
       dump:
         request:
           attributes:
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/fou.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/fou.yaml
index 0af5ab842c04..b02ab19817d3 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/fou.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/fou.yaml
@@ -15,7 +15,7 @@ kernel-policy: global
 definitions:
   -
     type: enum
-    name: encap_type
+    name: encap-type
     name-prefix: fou-encap-
     enum-name:
     entries: [ unspec, direct, gue ]
@@ -43,26 +43,26 @@ attribute-sets:
         name: type
         type: u8
       -
-        name: remcsum_nopartial
+        name: remcsum-nopartial
         type: flag
       -
-        name: local_v4
+        name: local-v4
         type: u32
       -
-        name: local_v6
+        name: local-v6
         type: binary
         checks:
           min-len: 16
       -
-        name: peer_v4
+        name: peer-v4
         type: u32
       -
-        name: peer_v6
+        name: peer-v6
         type: binary
         checks:
           min-len: 16
       -
-        name: peer_port
+        name: peer-port
         type: u16
         byte-order: big-endian
       -
@@ -90,12 +90,12 @@ operations:
             - port
             - ipproto
             - type
-            - remcsum_nopartial
-            - local_v4
-            - peer_v4
-            - local_v6
-            - peer_v6
-            - peer_port
+            - remcsum-nopartial
+            - local-v4
+            - peer-v4
+            - local-v6
+            - peer-v6
+            - peer-port
             - ifindex
 
     -
@@ -112,11 +112,11 @@ operations:
             - af
             - ifindex
             - port
-            - peer_port
-            - local_v4
-            - peer_v4
-            - local_v6
-            - peer_v6
+            - peer-port
+            - local-v4
+            - peer-v4
+            - local-v6
+            - peer-v6
 
     -
       name: get
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/mptcp_pm.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/mptcp_pm.yaml
index dfd017780d2f..fb57860fe778 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/mptcp_pm.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/mptcp_pm.yaml
@@ -57,21 +57,21 @@ definitions:
       doc: >-
         A new subflow has been established. 'error' should not be set.
         Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
-        daddr6, sport, dport, backup, if_idx [, error].
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: sub-closed
       doc: >-
         A subflow has been closed. An error (copy of sk_err) could be set if an
         error has been detected for this subflow.
         Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
-        daddr6, sport, dport, backup, if_idx [, error].
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: sub-priority
       value: 13
       doc: >-
         The priority of a subflow has changed. 'error' should not be set.
         Attributes: token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 |
-        daddr6, sport, dport, backup, if_idx [, error].
+        daddr6, sport, dport, backup, if-idx [, error].
      -
       name: listener-created
       value: 15
@@ -255,7 +255,7 @@ attribute-sets:
         name: timeout
         type: u32
       -
-        name: if_idx
+        name: if-idx
         type: u32
       -
         name: reset-reason
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/netdev.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/netdev.yaml
index f5e0750ab71d..c0ef6d0d7786 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/netdev.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/netdev.yaml
@@ -743,6 +743,18 @@ operations:
             - defer-hard-irqs
             - gro-flush-timeout
             - irq-suspend-timeout
+    -
+      name: bind-tx
+      doc: Bind dmabuf to netdev for TX
+      attribute-set: dmabuf
+      do:
+        request:
+          attributes:
+            - ifindex
+            - fd
+        reply:
+          attributes:
+            - id
 
 kernel-family:
   headers: [ "net/netdev_netlink.h"]
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/nfsd.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/nfsd.yaml
index c87658114852..8d1a3c01708f 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/nfsd.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/nfsd.yaml
@@ -27,7 +27,7 @@ attribute-sets:
         name: proc
         type: u32
       -
-        name: service_time
+        name: service-time
         type: s64
       -
         name: pad
@@ -139,7 +139,7 @@ operations:
             - prog
             - version
             - proc
-            - service_time
+            - service-time
             - saddr4
             - daddr4
             - saddr6
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/nl80211.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/nl80211.yaml
index 1ec49c3562cd..3611b11a7d8f 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/nl80211.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/nl80211.yaml
@@ -203,71 +203,6 @@ definitions:
       - scan-random-mac-addr
       - sched-scan-random-mac-addr
       - no-random-mac-addr
-  -
-    name: ieee80211-mcs-info
-    type: struct
-    members:
-      -
-        name: rx-mask
-        type: binary
-        len: 10
-      -
-        name: rx-highest
-        type: u16
-        byte-order: little-endian
-      -
-        name: tx-params
-        type: u8
-      -
-        name: reserved
-        type: binary
-        len: 3
-  -
-    name: ieee80211-vht-mcs-info
-    type: struct
-    members:
-      -
-        name: rx-mcs-map
-        type: u16
-        byte-order: little-endian
-      -
-        name: rx-highest
-        type: u16
-        byte-order: little-endian
-      -
-        name: tx-mcs-map
-        type: u16
-        byte-order: little-endian
-      -
-        name: tx-highest
-        type: u16
-        byte-order: little-endian
-  -
-    name: ieee80211-ht-cap
-    type: struct
-    members:
-      -
-        name: cap-info
-        type: u16
-        byte-order: little-endian
-      -
-        name: ampdu-params-info
-        type: u8
-      -
-        name: mcs
-        type: binary
-        struct: ieee80211-mcs-info
-      -
-        name: extended-ht-cap-info
-        type: u16
-        byte-order: little-endian
-      -
-        name: tx-bf-cap-info
-        type: u32
-        byte-order: little-endian
-      -
-        name: antenna-selection-info
-        type: u8
   -
     name: channel-type
     type: enum
@@ -761,7 +696,6 @@ attribute-sets:
       -
         name: ht-capability-mask
         type: binary
-        struct: ieee80211-ht-cap
       -
         name: noack-map
         type: u16
@@ -1382,7 +1316,6 @@ attribute-sets:
       -
         name: ht-mcs-set
         type: binary
-        struct: ieee80211-mcs-info
       -
         name: ht-capa
         type: u16
@@ -1395,7 +1328,6 @@ attribute-sets:
       -
         name: vht-mcs-set
         type: binary
-        struct: ieee80211-vht-mcs-info
       -
         name: vht-capa
         type: u32
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/ovpn.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/ovpn.yaml
new file mode 100644
index 000000000000..ba76426a542d
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/ovpn.yaml
@@ -0,0 +1,508 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+#
+# Author: Antonio Quartulli <antonio@openvpn.net>
+#
+# Copyright (c) 2024-2025, OpenVPN Inc.
+#
+
+name: ovpn
+
+protocol: genetlink
+
+doc: Netlink protocol to control OpenVPN network devices
+
+definitions:
+  -
+    type: const
+    name: nonce-tail-size
+    value: 8
+  -
+    type: enum
+    name: cipher-alg
+    entries: [ none, aes-gcm, chacha20-poly1305 ]
+  -
+    type: enum
+    name: del-peer-reason
+    entries:
+      - teardown
+      - userspace
+      - expired
+      - transport-error
+      - transport-disconnect
+  -
+    type: enum
+    name: key-slot
+    entries: [ primary, secondary ]
+
+attribute-sets:
+  -
+    name: peer
+    attributes:
+      -
+        name: id
+        type: u32
+        doc: >-
+          The unique ID of the peer in the device context. To be used to identify
+          peers during operations for a specific device
+        checks:
+          max: 0xFFFFFF
+      -
+        name: remote-ipv4
+        type: u32
+        doc: The remote IPv4 address of the peer
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: remote-ipv6
+        type: binary
+        doc: The remote IPv6 address of the peer
+        display-hint: ipv6
+        checks:
+          exact-len: 16
+      -
+        name: remote-ipv6-scope-id
+        type: u32
+        doc: The scope id of the remote IPv6 address of the peer (RFC2553)
+      -
+        name: remote-port
+        type: u16
+        doc: The remote port of the peer
+        byte-order: big-endian
+        checks:
+          min: 1
+      -
+        name: socket
+        type: u32
+        doc: The socket to be used to communicate with the peer
+      -
+        name: socket-netnsid
+        type: s32
+        doc: The ID of the netns the socket assigned to this peer lives in
+      -
+        name: vpn-ipv4
+        type: u32
+        doc: The IPv4 address assigned to the peer by the server
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: vpn-ipv6
+        type: binary
+        doc: The IPv6 address assigned to the peer by the server
+        display-hint: ipv6
+        checks:
+          exact-len: 16
+      -
+        name: local-ipv4
+        type: u32
+        doc: The local IPv4 to be used to send packets to the peer (UDP only)
+        byte-order: big-endian
+        display-hint: ipv4
+      -
+        name: local-ipv6
+        type: binary
+        doc: The local IPv6 to be used to send packets to the peer (UDP only)
+        display-hint: ipv6
+        checks:
+          exact-len: 16
+      -
+        name: local-port
+        type: u16
+        doc: The local port to be used to send packets to the peer (UDP only)
+        byte-order: big-endian
+        checks:
+          min: 1
+      -
+        name: keepalive-interval
+        type: u32
+        doc: >-
+          The number of seconds after which a keep alive message is sent to the
+          peer
+      -
+        name: keepalive-timeout
+        type: u32
+        doc: >-
+          The number of seconds from the last activity after which the peer is
+          assumed dead
+      -
+        name: del-reason
+        type: u32
+        doc: The reason why a peer was deleted
+        enum: del-peer-reason
+      -
+        name: vpn-rx-bytes
+        type: uint
+        doc: Number of bytes received over the tunnel
+      -
+        name: vpn-tx-bytes
+        type: uint
+        doc: Number of bytes transmitted over the tunnel
+      -
+        name: vpn-rx-packets
+        type: uint
+        doc: Number of packets received over the tunnel
+      -
+        name: vpn-tx-packets
+        type: uint
+        doc: Number of packets transmitted over the tunnel
+      -
+        name: link-rx-bytes
+        type: uint
+        doc: Number of bytes received at the transport level
+      -
+        name: link-tx-bytes
+        type: uint
+        doc: Number of bytes transmitted at the transport level
+      -
+        name: link-rx-packets
+        type: uint
+        doc: Number of packets received at the transport level
+      -
+        name: link-tx-packets
+        type: uint
+        doc: Number of packets transmitted at the transport level
+  -
+    name: peer-new-input
+    subset-of: peer
+    attributes:
+      -
+        name: id
+      -
+        name: remote-ipv4
+      -
+        name: remote-ipv6
+      -
+        name: remote-ipv6-scope-id
+      -
+        name: remote-port
+      -
+        name: socket
+      -
+        name: vpn-ipv4
+      -
+        name: vpn-ipv6
+      -
+        name: local-ipv4
+      -
+        name: local-ipv6
+      -
+        name: keepalive-interval
+      -
+        name: keepalive-timeout
+  -
+    name: peer-set-input
+    subset-of: peer
+    attributes:
+      -
+        name: id
+      -
+        name: remote-ipv4
+      -
+        name: remote-ipv6
+      -
+        name: remote-ipv6-scope-id
+      -
+        name: remote-port
+      -
+        name: vpn-ipv4
+      -
+        name: vpn-ipv6
+      -
+        name: local-ipv4
+      -
+        name: local-ipv6
+      -
+        name: keepalive-interval
+      -
+        name: keepalive-timeout
+  -
+    name: peer-del-input
+    subset-of: peer
+    attributes:
+      -
+        name: id
+  -
+    name: keyconf
+    attributes:
+      -
+        name: peer-id
+        type: u32
+        doc: >-
+          The unique ID of the peer in the device context. To be used to
+          identify peers during key operations
+        checks:
+          max: 0xFFFFFF
+      -
+        name: slot
+        type: u32
+        doc: The slot where the key should be stored
+        enum: key-slot
+      -
+        name: key-id
+        doc: >-
+          The unique ID of the key in the peer context. Used to fetch the
+          correct key upon decryption
+        type: u32
+        checks:
+          max: 7
+      -
+        name: cipher-alg
+        type: u32
+        doc: The cipher to be used when communicating with the peer
+        enum: cipher-alg
+      -
+        name: encrypt-dir
+        type: nest
+        doc: Key material for encrypt direction
+        nested-attributes: keydir
+      -
+        name: decrypt-dir
+        type: nest
+        doc: Key material for decrypt direction
+        nested-attributes: keydir
+  -
+    name: keydir
+    attributes:
+      -
+        name: cipher-key
+        type: binary
+        doc: The actual key to be used by the cipher
+        checks:
+          max-len: 256
+      -
+        name: nonce-tail
+        type: binary
+        doc: >-
+          Random nonce to be concatenated to the packet ID, in order to
+          obtain the actual cipher IV
+        checks:
+          exact-len: nonce-tail-size
+
+  -
+    name: keyconf-get
+    subset-of: keyconf
+    attributes:
+      -
+        name: peer-id
+      -
+        name: slot
+      -
+        name: key-id
+      -
+        name: cipher-alg
+  -
+    name: keyconf-swap-input
+    subset-of: keyconf
+    attributes:
+      -
+        name: peer-id
+  -
+    name: keyconf-del-input
+    subset-of: keyconf
+    attributes:
+      -
+        name: peer-id
+      -
+        name: slot
+  -
+    name: ovpn
+    attributes:
+      -
+        name: ifindex
+        type: u32
+        doc: Index of the ovpn interface to operate on
+      -
+        name: peer
+        type: nest
+        doc: >-
+          The peer object containing the attributed of interest for the specific
+          operation
+        nested-attributes: peer
+      -
+        name: keyconf
+        type: nest
+        doc: Peer specific cipher configuration
+        nested-attributes: keyconf
+  -
+    name: ovpn-peer-new-input
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: peer
+        nested-attributes: peer-new-input
+  -
+    name: ovpn-peer-set-input
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: peer
+        nested-attributes: peer-set-input
+  -
+    name: ovpn-peer-del-input
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: peer
+        nested-attributes: peer-del-input
+  -
+    name: ovpn-keyconf-get
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: keyconf
+        nested-attributes: keyconf-get
+  -
+    name: ovpn-keyconf-swap-input
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: keyconf
+        nested-attributes: keyconf-swap-input
+  -
+    name: ovpn-keyconf-del-input
+    subset-of: ovpn
+    attributes:
+      -
+        name: ifindex
+      -
+        name: keyconf
+        nested-attributes: keyconf-del-input
+
+operations:
+  list:
+    -
+      name: peer-new
+      attribute-set: ovpn-peer-new-input
+      flags: [ admin-perm ]
+      doc: Add a remote peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - peer
+    -
+      name: peer-set
+      attribute-set: ovpn-peer-set-input
+      flags: [ admin-perm ]
+      doc: modify a remote peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - peer
+    -
+      name: peer-get
+      attribute-set: ovpn
+      flags: [ admin-perm ]
+      doc: Retrieve data about existing remote peers (or a specific one)
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - peer
+        reply:
+          attributes:
+            - peer
+      dump:
+        request:
+          attributes:
+            - ifindex
+        reply:
+          attributes:
+            - peer
+    -
+      name: peer-del
+      attribute-set: ovpn-peer-del-input
+      flags: [ admin-perm ]
+      doc: Delete existing remote peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - peer
+    -
+      name: peer-del-ntf
+      doc: Notification about a peer being deleted
+      notify: peer-get
+      mcgrp: peers
+
+    -
+      name: key-new
+      attribute-set: ovpn
+      flags: [ admin-perm ]
+      doc: Add a cipher key for a specific peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - keyconf
+    -
+      name: key-get
+      attribute-set: ovpn-keyconf-get
+      flags: [ admin-perm ]
+      doc: Retrieve non-sensitive data about peer key and cipher
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - keyconf
+        reply:
+          attributes:
+            - keyconf
+    -
+      name: key-swap
+      attribute-set: ovpn-keyconf-swap-input
+      flags: [ admin-perm ]
+      doc: Swap primary and secondary session keys for a specific peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - keyconf
+    -
+      name: key-swap-ntf
+      notify: key-get
+      doc: >-
+        Notification about key having exhausted its IV space and requiring
+        renegotiation
+      mcgrp: peers
+    -
+      name: key-del
+      attribute-set: ovpn-keyconf-del-input
+      flags: [ admin-perm ]
+      doc: Delete cipher key for a specific peer
+      do:
+        pre: ovpn-nl-pre-doit
+        post: ovpn-nl-post-doit
+        request:
+          attributes:
+            - ifindex
+            - keyconf
+
+mcast-groups:
+  list:
+    -
+      name: peers
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_datapath.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_datapath.yaml
index edc8c95ca6f5..df6a8f94975e 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_datapath.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_datapath.yaml
@@ -35,8 +35,7 @@ definitions:
         name: dispatch-upcall-per-cpu
         doc: Allow per-cpu dispatch of upcalls
   -
-    name: datapath-stats
-    enum-name: ovs-dp-stats
+    name: ovs-dp-stats
     type: struct
     members:
       -
@@ -52,8 +51,7 @@ definitions:
         name: n-flows
         type: u64
   -
-    name: megaflow-stats
-    enum-name: ovs-dp-megaflow-stats
+    name: ovs-dp-megaflow-stats
     type: struct
     members:
       -
@@ -88,11 +86,11 @@ attribute-sets:
       -
         name: stats
         type: binary
-        struct: datapath-stats
+        struct: ovs-dp-stats
       -
         name: megaflow-stats
         type: binary
-        struct: megaflow-stats
+        struct: ovs-dp-megaflow-stats
       -
         name: user-features
         type: u32
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_flow.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_flow.yaml
index 46f5d1cd8a5f..7974aa7d8905 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_flow.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_flow.yaml
@@ -216,7 +216,7 @@ definitions:
     type: struct
     members:
       -
-        name: nd_target
+        name: nd-target
         type: binary
         len: 16
         byte-order: big-endian
@@ -258,12 +258,12 @@ definitions:
     type: struct
     members:
       -
-        name: vlan_tpid
+        name: vlan-tpid
         type: u16
         byte-order: big-endian
         doc: Tag protocol identifier (TPID) to push.
       -
-        name: vlan_tci
+        name: vlan-tci
         type: u16
         byte-order: big-endian
         doc: Tag control identifier (TCI) to push.
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_vport.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_vport.yaml
index b538bb99ee9b..306da6bb842d 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/ovs_vport.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/ovs_vport.yaml
@@ -23,9 +23,8 @@ definitions:
     name-prefix: ovs-vport-type-
     entries: [ unspec, netdev, internal, gre, vxlan, geneve ]
   -
-    name: vport-stats
+    name: ovs-vport-stats
     type: struct
-    enum-name: ovs-vport-stats
     members:
       -
         name: rx-packets
@@ -106,7 +105,7 @@ attribute-sets:
       -
         name: stats
         type: binary
-        struct: vport-stats
+        struct: ovs-vport-stats
       -
         name: pad
         type: unused
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/rt_addr.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/rt-addr.yaml
similarity index 89%
rename from Documentation/netlink/specs/rt_addr.yaml
rename to Documentation/netlink/specs/rt-addr.yaml
index df6b23f06a22..4f86aa1075da 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/rt_addr.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/rt-addr.yaml
@@ -2,6 +2,7 @@
 
 name: rt-addr
 protocol: netlink-raw
+uapi-header: linux/rtnetlink.h
 protonum: 0
 
 doc:
@@ -49,6 +50,8 @@ definitions:
   -
     name: ifa-flags
     type: flags
+    name-prefix: ifa-f-
+    enum-name:
     entries:
       -
         name: secondary
@@ -124,6 +127,7 @@ attribute-sets:
 operations:
   fixed-header: ifaddrmsg
   enum-model: directional
+  name-prefix: rtm-
   list:
     -
       name: newaddr
@@ -133,11 +137,6 @@ operations:
         request:
           value: 20
           attributes: &ifaddr-all
-            - ifa-family
-            - ifa-flags
-            - ifa-prefixlen
-            - ifa-scope
-            - ifa-index
             - address
             - label
             - local
@@ -150,11 +149,6 @@ operations:
         request:
           value: 21
           attributes:
-            - ifa-family
-            - ifa-flags
-            - ifa-prefixlen
-            - ifa-scope
-            - ifa-index
             - address
             - local
     -
@@ -164,8 +158,7 @@ operations:
       dump:
         request:
           value: 22
-          attributes:
-            - ifa-index
+          attributes: []
         reply:
           value: 20
           attributes: *ifaddr-all
@@ -177,9 +170,7 @@ operations:
       do:
         request:
           value: 58
-          attributes:
-            - ifa-family
-            - ifa-index
+          attributes: []
         reply:
           value: 58
           attributes: &mcaddr-attrs
@@ -188,8 +179,7 @@ operations:
       dump:
         request:
           value: 58
-          attributes:
-            - ifa-family
+          attributes: []
         reply:
           value: 58
           attributes: *mcaddr-attrs
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/rt_link.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/rt-link.yaml
similarity index 92%
rename from Documentation/netlink/specs/rt_link.yaml
rename to Documentation/netlink/specs/rt-link.yaml
index 6b9d5ee87d93..28c4cf66517c 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/rt_link.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/rt-link.yaml
@@ -2,6 +2,7 @@
 
 name: rt-link
 protocol: netlink-raw
+uapi-header: linux/rtnetlink.h
 protonum: 0
 
 doc:
@@ -11,6 +12,9 @@ definitions:
   -
     name: ifinfo-flags
     type: flags
+    header: linux/if.h
+    enum-name: net-device-flags
+    name-prefix: iff-
     entries:
       -
         name: up
@@ -53,6 +57,7 @@ definitions:
   -
     name: vlan-protocols
     type: enum
+    enum-name:
     entries:
       -
         name: 8021q
@@ -299,421 +304,297 @@ definitions:
         type: u8
   -
     name: ipv4-devconf
-    type: struct
-    members:
+    enum-name:
+    type: enum
+    entries:
       -
         name: forwarding
-        type: u32
       -
         name: mc-forwarding
-        type: u32
       -
         name: proxy-arp
-        type: u32
       -
         name: accept-redirects
-        type: u32
       -
         name: secure-redirects
-        type: u32
       -
         name: send-redirects
-        type: u32
       -
         name: shared-media
-        type: u32
       -
         name: rp-filter
-        type: u32
       -
         name: accept-source-route
-        type: u32
       -
         name: bootp-relay
-        type: u32
       -
         name: log-martians
-        type: u32
       -
         name: tag
-        type: u32
       -
         name: arpfilter
-        type: u32
       -
         name: medium-id
-        type: u32
       -
         name: noxfrm
-        type: u32
       -
         name: nopolicy
-        type: u32
       -
         name: force-igmp-version
-        type: u32
       -
         name: arp-announce
-        type: u32
       -
         name: arp-ignore
-        type: u32
       -
         name: promote-secondaries
-        type: u32
       -
         name: arp-accept
-        type: u32
       -
         name: arp-notify
-        type: u32
       -
         name: accept-local
-        type: u32
       -
         name: src-vmark
-        type: u32
       -
         name: proxy-arp-pvlan
-        type: u32
       -
         name: route-localnet
-        type: u32
       -
         name: igmpv2-unsolicited-report-interval
-        type: u32
       -
         name: igmpv3-unsolicited-report-interval
-        type: u32
       -
         name: ignore-routes-with-linkdown
-        type: u32
       -
         name: drop-unicast-in-l2-multicast
-        type: u32
       -
         name: drop-gratuitous-arp
-        type: u32
       -
         name: bc-forwarding
-        type: u32
       -
         name: arp-evict-nocarrier
-        type: u32
   -
     name: ipv6-devconf
-    type: struct
-    members:
+    enum-name:
+    type: enum
+    entries:
       -
         name: forwarding
-        type: u32
       -
         name: hoplimit
-        type: u32
       -
         name: mtu6
-        type: u32
       -
         name: accept-ra
-        type: u32
       -
         name: accept-redirects
-        type: u32
       -
         name: autoconf
-        type: u32
       -
         name: dad-transmits
-        type: u32
       -
         name: rtr-solicits
-        type: u32
       -
         name: rtr-solicit-interval
-        type: u32
       -
         name: rtr-solicit-delay
-        type: u32
       -
         name: use-tempaddr
-        type: u32
       -
         name: temp-valid-lft
-        type: u32
       -
         name: temp-prefered-lft
-        type: u32
       -
         name: regen-max-retry
-        type: u32
       -
         name: max-desync-factor
-        type: u32
       -
         name: max-addresses
-        type: u32
       -
         name: force-mld-version
-        type: u32
       -
         name: accept-ra-defrtr
-        type: u32
       -
         name: accept-ra-pinfo
-        type: u32
       -
         name: accept-ra-rtr-pref
-        type: u32
       -
         name: rtr-probe-interval
-        type: u32
       -
         name: accept-ra-rt-info-max-plen
-        type: u32
       -
         name: proxy-ndp
-        type: u32
       -
         name: optimistic-dad
-        type: u32
       -
         name: accept-source-route
-        type: u32
       -
         name: mc-forwarding
-        type: u32
       -
         name: disable-ipv6
-        type: u32
       -
         name: accept-dad
-        type: u32
       -
         name: force-tllao
-        type: u32
       -
         name: ndisc-notify
-        type: u32
       -
         name: mldv1-unsolicited-report-interval
-        type: u32
       -
         name: mldv2-unsolicited-report-interval
-        type: u32
       -
         name: suppress-frag-ndisc
-        type: u32
       -
         name: accept-ra-from-local
-        type: u32
       -
         name: use-optimistic
-        type: u32
       -
         name: accept-ra-mtu
-        type: u32
       -
         name: stable-secret
-        type: u32
       -
         name: use-oif-addrs-only
-        type: u32
       -
         name: accept-ra-min-hop-limit
-        type: u32
       -
         name: ignore-routes-with-linkdown
-        type: u32
       -
         name: drop-unicast-in-l2-multicast
-        type: u32
       -
         name: drop-unsolicited-na
-        type: u32
       -
         name: keep-addr-on-down
-        type: u32
       -
         name: rtr-solicit-max-interval
-        type: u32
       -
         name: seg6-enabled
-        type: u32
       -
         name: seg6-require-hmac
-        type: u32
       -
         name: enhanced-dad
-        type: u32
       -
         name: addr-gen-mode
-        type: u8
       -
         name: disable-policy
-        type: u32
       -
         name: accept-ra-rt-info-min-plen
-        type: u32
       -
         name: ndisc-tclass
-        type: u32
       -
         name: rpl-seg-enabled
-        type: u32
       -
         name: ra-defrtr-metric
-        type: u32
       -
         name: ioam6-enabled
-        type: u32
       -
         name: ioam6-id
-        type: u32
       -
         name: ioam6-id-wide
-        type: u32
       -
         name: ndisc-evict-nocarrier
-        type: u32
       -
         name: accept-untracked-na
-        type: u32
   -
     name: ifla-icmp6-stats
-    type: struct
-    members:
+    enum-name:
+    type: enum
+    entries:
+      -
+        name: num
       -
         name: inmsgs
-        type: u64
       -
         name: inerrors
-        type: u64
       -
         name: outmsgs
-        type: u64
       -
         name: outerrors
-        type: u64
       -
         name: csumerrors
-        type: u64
       -
         name: ratelimithost
-        type: u64
   -
     name: ifla-inet6-stats
-    type: struct
-    members:
+    enum-name:
+    type: enum
+    entries:
+      -
+        name: num
       -
         name: inpkts
-        type: u64
       -
         name: inoctets
-        type: u64
       -
         name: indelivers
-        type: u64
       -
         name: outforwdatagrams
-        type: u64
       -
         name: outpkts
-        type: u64
       -
         name: outoctets
-        type: u64
       -
         name: inhdrerrors
-        type: u64
       -
         name: intoobigerrors
-        type: u64
       -
         name: innoroutes
-        type: u64
       -
         name: inaddrerrors
-        type: u64
       -
         name: inunknownprotos
-        type: u64
       -
         name: intruncatedpkts
-        type: u64
       -
         name: indiscards
-        type: u64
       -
         name: outdiscards
-        type: u64
       -
         name: outnoroutes
-        type: u64
       -
         name: reasmtimeout
-        type: u64
       -
         name: reasmreqds
-        type: u64
       -
         name: reasmoks
-        type: u64
       -
         name: reasmfails
-        type: u64
       -
         name: fragoks
-        type: u64
       -
         name: fragfails
-        type: u64
       -
         name: fragcreates
-        type: u64
       -
         name: inmcastpkts
-        type: u64
       -
         name: outmcastpkts
-        type: u64
       -
         name: inbcastpkts
-        type: u64
       -
         name: outbcastpkts
-        type: u64
       -
         name: inmcastoctets
-        type: u64
       -
         name: outmcastoctets
-        type: u64
       -
         name: inbcastoctets
-        type: u64
       -
         name: outbcastoctets
-        type: u64
       -
         name: csumerrors
-        type: u64
       -
         name: noectpkts
-        type: u64
       -
         name: ect1-pkts
-        type: u64
       -
         name: ect0-pkts
-        type: u64
       -
         name: cepkts
-        type: u64
       -
         name: reasm-overlaps
-        type: u64
   - name: br-boolopt-multi
     type: struct
+    header: linux/if_bridge.h
     members:
       -
         name: optval
@@ -722,7 +603,7 @@ definitions:
         name: optmask
         type: u32
   -
-    name: if_stats_msg
+    name: if-stats-msg
     type: struct
     members:
       -
@@ -754,6 +635,7 @@ definitions:
   -
     name: vlan-flags
     type: flags
+    enum-name:
     entries:
       - reorder-hdr
       - gvrp
@@ -840,6 +722,7 @@ definitions:
   -
     name: ifla-vf-link-state-enum
     type: enum
+    enum-name:
     entries:
       - auto
       - enable
@@ -906,6 +789,7 @@ definitions:
   -
     name: rtext-filter
     type: flags
+    enum-name:
     entries:
       - vf
       - brvlan
@@ -918,6 +802,7 @@ definitions:
   -
     name: netkit-policy
     type: enum
+    enum-name:
     entries:
       -
         name: forward
@@ -928,6 +813,7 @@ definitions:
   -
     name: netkit-mode
     type: enum
+    enum-name: netkit-mode
     entries:
       - name: l2
       - name: l3
@@ -935,9 +821,18 @@ definitions:
   -
     name: netkit-scrub
     type: enum
+    enum-name:
     entries:
       - name: none
       - name: default
+  -
+    name: ovpn-mode
+    enum-name: ovpn-mode
+    name-prefix: ovpn-mode
+    type: enum
+    entries:
+      - p2p
+      - mp
 
 attribute-sets:
   -
@@ -1171,24 +1066,27 @@ attribute-sets:
         multi-attr: true
   -
     name: af-spec-attrs
+    name-prefix: af-
+    attr-max-name: af-max
     attributes:
       -
-        name: "inet"
+        name: inet
         type: nest
         value: 2
         nested-attributes: ifla-attrs
       -
-        name: "inet6"
+        name: inet6
         type: nest
         value: 10
         nested-attributes: ifla6-attrs
       -
-        name: "mctp"
+        name: mctp
         type: nest
         value: 45
         nested-attributes: mctp-attrs
   -
     name: vfinfo-list-attrs
+    name-prefix: ifla-vf-
     attributes:
       -
         name: info
@@ -1197,6 +1095,7 @@ attribute-sets:
         multi-attr: true
   -
     name: vfinfo-attrs
+    name-prefix: ifla-vf-
     attributes:
       -
         name: mac
@@ -1251,6 +1150,7 @@ attribute-sets:
         type: binary
   -
     name: vf-stats-attrs
+    name-prefix: ifla-vf-stats-
     attributes:
       -
         name: rx-packets
@@ -1282,6 +1182,8 @@ attribute-sets:
         type: u64
   -
     name: vf-vlan-attrs
+    name-prefix: ifla-vf-vlan-
+    attr-max-name: ifla-vf-vlan-info-max
     attributes:
       -
         name: info
@@ -1290,12 +1192,15 @@ attribute-sets:
         multi-attr: true
   -
     name: vf-ports-attrs
+    name-prefix: ifla-
     attributes: []
   -
     name: port-self-attrs
+    name-prefix: ifla-
     attributes: []
   -
     name: linkinfo-attrs
+    name-prefix: ifla-info-
     attributes:
       -
         name: kind
@@ -1420,6 +1325,8 @@ attribute-sets:
         type: indexed-array
         sub-type: binary
         display-hint: ipv6
+        checks:
+          exact-len: 16
       -
         name: coupled-control
         type: u8
@@ -1778,15 +1685,19 @@ attribute-sets:
       -
         name: iflags
         type: u16
+        byte-order: big-endian
       -
         name: oflags
         type: u16
+        byte-order: big-endian
       -
         name: ikey
         type: u32
+        byte-order: big-endian
       -
         name: okey
         type: u32
+        byte-order: big-endian
       -
         name: local
         type: binary
@@ -1806,10 +1717,11 @@ attribute-sets:
         type: u8
       -
         name: encap-limit
-        type: u32
+        type: u8
       -
         name: flowinfo
         type: u32
+        byte-order: big-endian
       -
         name: flags
         type: u32
@@ -1822,9 +1734,11 @@ attribute-sets:
       -
         name: encap-sport
         type: u16
+        byte-order: big-endian
       -
         name: encap-dport
         type: u16
+        byte-order: big-endian
       -
         name: collect-metadata
         type: flag
@@ -1846,9 +1760,58 @@ attribute-sets:
       -
         name: erspan-hwid
         type: u16
+  -
+    name: linkinfo-gre6-attrs
+    subset-of: linkinfo-gre-attrs
+    attributes:
+      -
+        name: link
+      -
+        name: iflags
+      -
+        name: oflags
+      -
+        name: ikey
+      -
+        name: okey
+      -
+        name: local
+        display-hint: ipv6
+      -
+        name: remote
+        display-hint: ipv6
+      -
+        name: ttl
+      -
+        name: encap-limit
+      -
+        name: flowinfo
+      -
+        name: flags
+      -
+        name: encap-type
+      -
+        name: encap-flags
+      -
+        name: encap-sport
+      -
+        name: encap-dport
+      -
+        name: collect-metadata
+      -
+        name: fwmark
+      -
+        name: erspan-index
+      -
+        name: erspan-ver
+      -
+        name: erspan-dir
+      -
+        name: erspan-hwid
   -
     name: linkinfo-vti-attrs
     name-prefix: ifla-vti-
+    header: linux/if_tunnel.h
     attributes:
       -
         name: link
@@ -1856,9 +1819,11 @@ attribute-sets:
       -
         name: ikey
         type: u32
+        byte-order: big-endian
       -
         name: okey
         type: u32
+        byte-order: big-endian
       -
         name: local
         type: binary
@@ -1908,6 +1873,7 @@ attribute-sets:
       -
         name: port
         type: u16
+        byte-order: big-endian
       -
         name: collect-metadata
         type: flag
@@ -1927,6 +1893,7 @@ attribute-sets:
       -
         name: label
         type: u32
+        byte-order: big-endian
       -
         name: ttl-inherit
         type: u8
@@ -1967,9 +1934,11 @@ attribute-sets:
       -
         name: flowinfo
         type: u32
+        byte-order: big-endian
       -
         name: flags
         type: u16
+        byte-order: big-endian
       -
         name: proto
         type: u8
@@ -1999,9 +1968,11 @@ attribute-sets:
       -
         name: encap-sport
         type: u16
+        byte-order: big-endian
       -
         name: encap-dport
         type: u16
+        byte-order: big-endian
       -
         name: collect-metadata
         type: flag
@@ -2101,7 +2072,7 @@ attribute-sets:
         byte-order: big-endian
   -
     name: ifla-vlan-qos
-    name-prefix: ifla-vlan-qos
+    name-prefix: ifla-vlan-qos-
     attributes:
       -
         name: mapping
@@ -2117,6 +2088,7 @@ attribute-sets:
         type: u32
   -
     name: xdp-attrs
+    name-prefix: ifla-xdp-
     attributes:
       -
         name: fd
@@ -2144,13 +2116,16 @@ attribute-sets:
         type: s32
   -
     name: ifla-attrs
+    name-prefix: ifla-inet-
     attributes:
       -
         name: conf
         type: binary
-        struct: ipv4-devconf
+        sub-type: u32
+        doc: u32 indexed by ipv4-devconf - 1 on output, on input it's a nest
   -
     name: ifla6-attrs
+    name-prefix: ifla-inet6-
     attributes:
       -
         name: flags
@@ -2158,11 +2133,12 @@ attribute-sets:
       -
         name: conf
         type: binary
-        struct: ipv6-devconf
+        sub-type: u32
+        doc: u32 indexed by ipv6-devconf - 1 on output, on input it's a nest
       -
         name: stats
         type: binary
-        struct: ifla-inet6-stats
+        sub-type: u64
       -
         name: mcast
         type: binary
@@ -2173,7 +2149,7 @@ attribute-sets:
       -
         name: icmp6stats
         type: binary
-        struct: ifla-icmp6-stats
+        sub-type: u64
       -
         name: token
         type: binary
@@ -2216,6 +2192,7 @@ attribute-sets:
         type: binary
   -
     name: link-offload-xstats
+    name-prefix: ifla-offload-xstats-
     attributes:
       -
         name: cpu-hit
@@ -2230,6 +2207,7 @@ attribute-sets:
         type: binary
   -
     name: hw-s-info-one
+    name-prefix: ifla-offload-xstats-hw-s-info-
     attributes:
       -
         name: request
@@ -2239,6 +2217,8 @@ attribute-sets:
         type: u8
   -
     name: link-dpll-pin-attrs
+    name-prefix: dpll-a-
+    header: linux/dpll.h
     attributes:
       -
         name: id
@@ -2279,6 +2259,14 @@ attribute-sets:
       -
         name: tailroom
         type: u16
+  -
+    name: linkinfo-ovpn-attrs
+    name-prefix: ifla-ovpn-
+    attributes:
+      -
+        name: mode
+        type: u8
+        enum: ovpn-mode
 
 sub-messages:
   -
@@ -2299,6 +2287,9 @@ sub-messages:
       -
         value: gretap
         attribute-set: linkinfo-gre-attrs
+      -
+        value: ip6gre
+        attribute-set: linkinfo-gre6-attrs
       -
         value: geneve
         attribute-set: linkinfo-geneve-attrs
@@ -2329,6 +2320,9 @@ sub-messages:
       -
         value: netkit
         attribute-set: linkinfo-netkit-attrs
+      -
+        value: ovpn
+        attribute-set: linkinfo-ovpn-attrs
   -
     name: linkinfo-member-data-msg
     formats:
@@ -2341,6 +2335,7 @@ sub-messages:
 
 operations:
   enum-model: directional
+  name-prefix: rtm-
   list:
     -
       name: newlink
@@ -2351,7 +2346,6 @@ operations:
         request:
           value: 16
           attributes: &link-new-attrs
-            - ifi-index
             - ifname
             - net-ns-pid
             - net-ns-fd
@@ -2367,13 +2361,18 @@ operations:
             - txqlen
             - operstate
             - linkmode
-            - group
             - gso-max-size
             - gso-max-segs
             - gro-max-size
             - gso-ipv4-max-size
             - gro-ipv4-max-size
             - af-spec
+    -
+      name: newlink-ntf
+      doc: Notify that a link has been created
+      value: 16
+      notify: getlink
+      fixed-header: ifinfomsg
     -
       name: dellink
       doc: Delete an existing link.
@@ -2383,7 +2382,6 @@ operations:
         request:
           value: 17
           attributes:
-            - ifi-index
             - ifname
     -
       name: getlink
@@ -2394,7 +2392,6 @@ operations:
         request:
           value: 18
           attributes:
-            - ifi-index
             - ifname
             - alt-ifname
             - ext-mask
@@ -2402,11 +2399,6 @@ operations:
         reply:
           value: 16
           attributes: &link-all-attrs
-            - ifi-family
-            - ifi-type
-            - ifi-index
-            - ifi-flags
-            - ifi-change
             - address
             - broadcast
             - ifname
@@ -2452,7 +2444,6 @@ operations:
             - xdp
             - event
             - new-netnsid
-            - if-netnsid
             - target-netnsid
             - carrier-up-count
             - carrier-down-count
@@ -2495,18 +2486,13 @@ operations:
       name: getstats
       doc: Get / dump link stats.
       attribute-set: stats-attrs
-      fixed-header: if_stats_msg
+      fixed-header: if-stats-msg
       do:
         request:
           value: 94
-          attributes:
-            - ifindex
         reply:
           value: 92
           attributes: &link-stats-attrs
-            - family
-            - ifindex
-            - filter-mask
             - link-64
             - link-xstats
             - link-xstats-slave
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/rt_neigh.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/rt-neigh.yaml
similarity index 97%
rename from Documentation/netlink/specs/rt_neigh.yaml
rename to Documentation/netlink/specs/rt-neigh.yaml
index a843caa72259..e9cba164e3d1 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/rt_neigh.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/rt-neigh.yaml
@@ -2,6 +2,7 @@
 
 name: rt-neigh
 protocol: netlink-raw
+uapi-header: linux/rtnetlink.h
 protonum: 0
 
 doc:
@@ -48,6 +49,7 @@ definitions:
   -
     name: nud-state
     type: flags
+    enum-name:
     entries:
       - incomplete
       - reachable
@@ -60,6 +62,7 @@ definitions:
   -
     name: ntf-flags
     type: flags
+    enum-name:
     entries:
       - use
       - self
@@ -72,12 +75,14 @@ definitions:
   -
     name: ntf-ext-flags
     type: flags
+    enum-name:
     entries:
       - managed
       - locked
   -
     name: rtm-type
     type: enum
+    enum-name:
     entries:
       - unspec
       - unicast
@@ -179,6 +184,7 @@ definitions:
 attribute-sets:
   -
     name: neighbour-attrs
+    name-prefix: nda-
     attributes:
       -
         name: unspec
@@ -241,6 +247,7 @@ attribute-sets:
         type: u8
   -
     name: ndt-attrs
+    name-prefix: ndta-
     attributes:
       -
         name: name
@@ -274,6 +281,7 @@ attribute-sets:
         type: pad
   -
     name: ndtpa-attrs
+    name-prefix: ndtpa-
     attributes:
       -
         name: ifindex
@@ -335,6 +343,7 @@ attribute-sets:
 
 operations:
   enum-model: directional
+  name-prefix: rtm-
   list:
     -
       name: newneigh
@@ -372,7 +381,7 @@ operations:
       name: delneigh-ntf
       doc: Notify a neighbour deletion
       value: 29
-      notify: delneigh
+      notify: getneigh
       fixed-header: ndmsg
     -
       name: getneigh
@@ -393,6 +402,7 @@ operations:
             - ifindex
             - master
         reply:
+          value: 28
           attributes: *neighbour-all
     -
       name: newneigh-ntf
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/rt_route.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/rt-route.yaml
similarity index 93%
rename from Documentation/netlink/specs/rt_route.yaml
rename to Documentation/netlink/specs/rt-route.yaml
index 292469c7d4b9..800f3a823d47 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/rt_route.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/rt-route.yaml
@@ -2,6 +2,7 @@
 
 name: rt-route
 protocol: netlink-raw
+uapi-header: linux/rtnetlink.h
 protonum: 0
 
 doc:
@@ -11,6 +12,7 @@ definitions:
   -
     name: rtm-type
     name-prefix: rtn-
+    enum-name:
     type: enum
     entries:
       - unspec
@@ -245,21 +247,19 @@ attribute-sets:
 
 operations:
   enum-model: directional
+  fixed-header: rtmsg
+  name-prefix: rtm-
   list:
     -
       name: getroute
       doc: Dump route information.
       attribute-set: route-attrs
-      fixed-header: rtmsg
       do:
         request:
           value: 26
           attributes:
-            - rtm-family
             - src
-            - rtm-src-len
             - dst
-            - rtm-dst-len
             - iif
             - oif
             - ip-proto
@@ -271,15 +271,6 @@ operations:
         reply:
           value: 24
           attributes: &all-route-attrs
-            - rtm-family
-            - rtm-dst-len
-            - rtm-src-len
-            - rtm-tos
-            - rtm-table
-            - rtm-protocol
-            - rtm-scope
-            - rtm-type
-            - rtm-flags
             - dst
             - src
             - iif
@@ -311,8 +302,7 @@ operations:
       dump:
         request:
           value: 26
-          attributes:
-            - rtm-family
+          attributes: []
         reply:
           value: 24
           attributes: *all-route-attrs
@@ -320,7 +310,6 @@ operations:
       name: newroute
       doc: Create a new route
       attribute-set: route-attrs
-      fixed-header: rtmsg
       do:
         request:
           value: 24
@@ -329,7 +318,6 @@ operations:
       name: delroute
       doc: Delete an existing route
       attribute-set: route-attrs
-      fixed-header: rtmsg
       do:
         request:
           value: 25
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/rt_rule.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/rt-rule.yaml
similarity index 97%
rename from Documentation/netlink/specs/rt_rule.yaml
rename to Documentation/netlink/specs/rt-rule.yaml
index de0938d36541..003707ca4a3e 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/rt_rule.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/rt-rule.yaml
@@ -2,6 +2,7 @@
 
 name: rt-rule
 protocol: netlink-raw
+uapi-header: linux/fib_rules.h
 protonum: 0
 
 doc:
@@ -56,6 +57,7 @@ definitions:
   -
     name: fr-act
     type: enum
+    enum-name:
     entries:
       - unspec
       - to-tbl
@@ -90,6 +92,7 @@ definitions:
 attribute-sets:
   -
     name: fib-rule-attrs
+    name-prefix: fra-
     attributes:
       -
         name: dst
@@ -198,6 +201,7 @@ attribute-sets:
 operations:
   enum-model: directional
   fixed-header: fib-rule-hdr
+  name-prefix: rtm-
   list:
     -
       name: newrule
@@ -234,7 +238,7 @@ operations:
       name: newrule-ntf
       doc: Notify a rule creation
       value: 32
-      notify: newrule
+      notify: getrule
     -
       name: delrule
       doc: Remove an existing FIB rule
@@ -247,7 +251,7 @@ operations:
       name: delrule-ntf
       doc: Notify a rule deletion
       value: 33
-      notify: delrule
+      notify: getrule
     -
       name: getrule
       doc: Dump all FIB rules
diff --git linux-libre-6.15-gnu/Documentation/netlink/specs/tc.yaml linux-libre-6.16-gnu/Documentation/netlink/specs/tc.yaml
index 953aa837958b..42d74c9aeb54 100644
--- linux-libre-6.15-gnu/Documentation/netlink/specs/tc.yaml
+++ linux-libre-6.16-gnu/Documentation/netlink/specs/tc.yaml
@@ -2,6 +2,7 @@
 
 name: tc
 protocol: netlink-raw
+uapi-header: linux/pkt_cls.h
 protonum: 0
 
 doc:
@@ -12,6 +13,7 @@ definitions:
   -
     name: tcmsg
     type: struct
+    header: linux/rtnetlink.h
     members:
       -
         name: family
@@ -33,7 +35,8 @@ definitions:
         name: info
         type: u32
   -
-    name: tc-cls-flags
+    name: cls-flags
+    enum-name:
     type: flags
     entries:
       - skip-hw
@@ -42,7 +45,9 @@ definitions:
       - not-in-nw
       - verbose
   -
-    name: tc-flower-key-ctrl-flags
+    name: flower-key-ctrl-flags
+    name-prefix: tca-flower-key-flags-
+    enum-name:
     type: flags
     entries:
       - frag
@@ -227,7 +232,7 @@ definitions:
         type: u8
         doc: log(P_max / (qth-max - qth-min))
       -
-        name: Scell_log
+        name: Scell-log
         type: u8
         doc: cell size for idle damping
       -
@@ -248,7 +253,7 @@ definitions:
         name: DPs
         type: u32
       -
-        name: def_DP
+        name: def-DP
         type: u32
       -
         name: grio
@@ -630,6 +635,7 @@ definitions:
   -
     name: tc-ratespec
     type: struct
+    header: linux/pkt_sched.h
     members:
       -
         name: cell-log
@@ -1186,7 +1192,7 @@ definitions:
         name: firstuse
         type: u64
   -
-    name: tc-gen
+    name: tc-gact
     type: struct
     members:
       -
@@ -1377,7 +1383,8 @@ definitions:
         type: s32
 attribute-sets:
   -
-    name: tc-attrs
+    name: attrs
+    name-prefix: tca-
     attributes:
       -
         name: kind
@@ -1385,7 +1392,7 @@ attribute-sets:
       -
         name: options
         type: sub-message
-        sub-message: tc-options-msg
+        sub-message: options-msg
         selector: kind
       -
         name: stats
@@ -1436,7 +1443,8 @@ attribute-sets:
         name: ext-warn-msg
         type: string
   -
-    name: tc-act-attrs
+    name: act-attrs
+    name-prefix: tca-act-
     attributes:
       -
         name: kind
@@ -1444,7 +1452,7 @@ attribute-sets:
       -
         name: options
         type: sub-message
-        sub-message: tc-act-options-msg
+        sub-message: act-options-msg
         selector: kind
       -
         name: index
@@ -1452,7 +1460,7 @@ attribute-sets:
       -
         name: stats
         type: nest
-        nested-attributes: tc-act-stats-attrs
+        nested-attributes: tca-stats-attrs
       -
         name: pad
         type: pad
@@ -1472,39 +1480,9 @@ attribute-sets:
         name: in-hw-count
         type: u32
   -
-    name: tc-act-stats-attrs
-    attributes:
-      -
-        name: basic
-        type: binary
-        struct: gnet-stats-basic
-      -
-        name: rate-est
-        type: binary
-        struct: gnet-stats-rate-est
-      -
-        name: queue
-        type: binary
-        struct: gnet-stats-queue
-      -
-        name: app
-        type: binary
-      -
-        name: rate-est64
-        type: binary
-        struct: gnet-stats-rate-est64
-      -
-        name: pad
-        type: pad
-      -
-        name: basic-hw
-        type: binary
-        struct: gnet-stats-basic
-      -
-        name: pkt64
-        type: u64
-  -
-    name: tc-act-bpf-attrs
+    name: act-bpf-attrs
+    name-prefix: tca-act-bpf-
+    header: linux/tc_act/tc_bpf.h
     attributes:
       -
         name: tm
@@ -1535,7 +1513,9 @@ attribute-sets:
         name: id
         type: binary
   -
-    name: tc-act-connmark-attrs
+    name: act-connmark-attrs
+    name-prefix: tca-connmark-
+    header: linux/tc_act/tc_connmark.h
     attributes:
       -
         name: parms
@@ -1548,7 +1528,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-csum-attrs
+    name: act-csum-attrs
+    name-prefix: tca-csum-
+    header: linux/tc_act/tc_csum.h
     attributes:
       -
         name: parms
@@ -1561,7 +1543,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-ct-attrs
+    name: act-ct-attrs
+    name-prefix: tca-ct-
+    header: linux/tc_act/tc_ct.h
     attributes:
       -
         name: parms
@@ -1623,7 +1607,9 @@ attribute-sets:
         name: helper-proto
         type: u8
   -
-    name: tc-act-ctinfo-attrs
+    name: act-ctinfo-attrs
+    name-prefix: tca-ctinfo-
+    header: linux/tc_act/tc_ctinfo.h
     attributes:
       -
         name: pad
@@ -1657,7 +1643,9 @@ attribute-sets:
         name: stats-cpmark-set
         type: u64
   -
-    name: tc-act-gate-attrs
+    name: act-gate-attrs
+    name-prefix: tca-gate-
+    header: linux/tc_act/tc_gate.h
     attributes:
       -
         name: tm
@@ -1691,7 +1679,9 @@ attribute-sets:
         name: clockid
         type: s32
   -
-    name: tc-act-ife-attrs
+    name: act-ife-attrs
+    name-prefix: tca-ife-
+    header: linux/tc_act/tc_ife.h
     attributes:
       -
         name: parms
@@ -1716,7 +1706,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-mirred-attrs
+    name: act-mirred-attrs
+    name-prefix: tca-mirred-
+    header: linux/tc_act/tc_mirred.h
     attributes:
       -
         name: tm
@@ -1732,7 +1724,9 @@ attribute-sets:
         name: blockid
         type: binary
   -
-    name: tc-act-mpls-attrs
+    name: act-mpls-attrs
+    name-prefix: tca-mpls-
+    header: linux/tc_act/tc_mpls.h
     attributes:
       -
         name: tm
@@ -1762,7 +1756,9 @@ attribute-sets:
         name: bos
         type: u8
   -
-    name: tc-act-nat-attrs
+    name: act-nat-attrs
+    name-prefix: tca-nat-
+    header: linux/tc_act/tc_nat.h
     attributes:
       -
         name: parms
@@ -1775,7 +1771,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-pedit-attrs
+    name: act-pedit-attrs
+    name-prefix: tca-pedit-
+    header: linux/tc_act/tc_pedit.h
     attributes:
       -
         name: tm
@@ -1798,45 +1796,9 @@ attribute-sets:
         name: key-ex
         type: binary
   -
-    name: tc-act-police-attrs
-    attributes:
-      -
-        name: tbf
-        type: binary
-        struct: tc-police
-      -
-        name: rate
-        type: binary # TODO
-      -
-        name: peakrate
-        type: binary # TODO
-      -
-        name: avrate
-        type: u32
-      -
-        name: result
-        type: u32
-      -
-        name: tm
-        type: binary
-        struct: tcf-t
-      -
-        name: pad
-        type: pad
-      -
-        name: rate64
-        type: u64
-      -
-        name: peakrate64
-        type: u64
-      -
-        name: pktrate64
-        type: u64
-      -
-        name: pktburst64
-        type: u64
-  -
-    name: tc-act-simple-attrs
+    name: act-simple-attrs
+    name-prefix: tca-def-
+    header: linux/tc_act/tc_defact.h
     attributes:
       -
         name: tm
@@ -1852,7 +1814,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-skbedit-attrs
+    name: act-skbedit-attrs
+    name-prefix: tca-skbedit-
+    header: linux/tc_act/tc_skbedit.h
     attributes:
       -
         name: tm
@@ -1886,7 +1850,9 @@ attribute-sets:
         name: queue-mapping-max
         type: u16
   -
-    name: tc-act-skbmod-attrs
+    name: act-skbmod-attrs
+    name-prefix: tca-skbmod-
+    header: linux/tc_act/tc_skbmod.h
     attributes:
       -
         name: tm
@@ -1908,7 +1874,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-tunnel-key-attrs
+    name: act-tunnel-key-attrs
+    name-prefix: tca-tunnel-key-
+    header: linux/tc_act/tc_tunnel_key.h
     attributes:
       -
         name: tm
@@ -1958,7 +1926,9 @@ attribute-sets:
         name: no-frag
         type: flag
   -
-    name: tc-act-vlan-attrs
+    name: act-vlan-attrs
+    name-prefix: tca-vlan-
+    header: linux/tc_act/tc_vlan.h
     attributes:
       -
         name: tm
@@ -1987,7 +1957,8 @@ attribute-sets:
         name: push-eth-src
         type: binary
   -
-    name: tc-basic-attrs
+    name: basic-attrs
+    name-prefix: tca-basic-
     attributes:
       -
         name: classid
@@ -1995,16 +1966,16 @@ attribute-sets:
       -
         name: ematches
         type: nest
-        nested-attributes: tc-ematch-attrs
+        nested-attributes: ematch-attrs
       -
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: pcnt
         type: binary
@@ -2013,17 +1984,18 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-bpf-attrs
+    name: bpf-attrs
+    name-prefix: tca-bpf-
     attributes:
       -
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: classid
         type: u32
@@ -2052,7 +2024,8 @@ attribute-sets:
         name: id
         type: u32
   -
-    name: tc-cake-attrs
+    name: cake-attrs
+    name-prefix: tca-cake-
     attributes:
       -
         name: pad
@@ -2109,7 +2082,8 @@ attribute-sets:
         name: fwmark
         type: u32
   -
-    name: tc-cake-stats-attrs
+    name: cake-stats-attrs
+    name-prefix: tca-cake-stats-
     attributes:
       -
         name: pad
@@ -2142,7 +2116,7 @@ attribute-sets:
         name: tin-stats
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-cake-tin-stats-attrs
+        nested-attributes: cake-tin-stats-attrs
       -
         name: deficit
         type: s32
@@ -2162,7 +2136,8 @@ attribute-sets:
         name: blue-timer-us
         type: s32
   -
-    name: tc-cake-tin-stats-attrs
+    name: cake-tin-stats-attrs
+    name-prefix: tca-cake-tin-stats-
     attributes:
       -
         name: pad
@@ -2240,29 +2215,32 @@ attribute-sets:
         name: flow-quantum
         type: u32
   -
-    name: tc-cbs-attrs
+    name: cbs-attrs
+    name-prefix: tca-cbs-
     attributes:
       -
         name: parms
         type: binary
         struct: tc-cbs-qopt
   -
-    name: tc-cgroup-attrs
+    name: cgroup-attrs
+    name-prefix: tca-cgroup-
     attributes:
       -
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: ematches
         type: binary
   -
-    name: tc-choke-attrs
+    name: choke-attrs
+    name-prefix: tca-choke-
     attributes:
       -
         name: parms
@@ -2278,7 +2256,8 @@ attribute-sets:
         name: max-p
         type: u32
   -
-    name: tc-codel-attrs
+    name: codel-attrs
+    name-prefix: tca-codel-
     attributes:
       -
         name: target
@@ -2296,13 +2275,16 @@ attribute-sets:
         name: ce-threshold
         type: u32
   -
-    name: tc-drr-attrs
+    name: drr-attrs
+    name-prefix: tca-drr-
     attributes:
       -
         name: quantum
         type: u32
   -
-    name: tc-ematch-attrs
+    name: ematch-attrs
+    name-prefix: tca-ematch-
+    attr-max-name: tca-ematch-tree-max
     attributes:
       -
         name: tree-hdr
@@ -2312,7 +2294,8 @@ attribute-sets:
         name: tree-list
         type: binary
   -
-    name: tc-flow-attrs
+    name: flow-attrs
+    name-prefix: tca-flow-
     attributes:
       -
         name: keys
@@ -2344,7 +2327,7 @@ attribute-sets:
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: ematches
         type: binary
@@ -2352,7 +2335,8 @@ attribute-sets:
         name: perturb
         type: u32
   -
-    name: tc-flower-attrs
+    name: flower-attrs
+    name-prefix: tca-flower-
     attributes:
       -
         name: classid
@@ -2364,7 +2348,7 @@ attribute-sets:
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: key-eth-dst
         type: binary
@@ -2443,7 +2427,7 @@ attribute-sets:
       -
         name: flags
         type: u32
-        enum: tc-cls-flags
+        enum: cls-flags
         enum-as-flags: true
       -
         name: key-vlan-id
@@ -2548,13 +2532,13 @@ attribute-sets:
         name: key-flags
         type: u32
         byte-order: big-endian
-        enum: tc-flower-key-ctrl-flags
+        enum: flower-key-ctrl-flags
         enum-as-flags: true
       -
         name: key-flags-mask
         type: u32
         byte-order: big-endian
-        enum: tc-flower-key-ctrl-flags
+        enum: flower-key-ctrl-flags
         enum-as-flags: true
       -
         name: key-icmpv4-code
@@ -2677,11 +2661,11 @@ attribute-sets:
       -
         name: key-enc-opts
         type: nest
-        nested-attributes: tc-flower-key-enc-opts-attrs
+        nested-attributes: flower-key-enc-opts-attrs
       -
         name: key-enc-opts-mask
         type: nest
-        nested-attributes: tc-flower-key-enc-opts-attrs
+        nested-attributes: flower-key-enc-opts-attrs
       -
         name: in-hw-count
         type: u32
@@ -2728,7 +2712,7 @@ attribute-sets:
       -
         name: key-mpls-opts
         type: nest
-        nested-attributes: tc-flower-key-mpls-opt-attrs
+        nested-attributes: flower-key-mpls-opt-attrs
       -
         name: key-hash
         type: u32
@@ -2756,7 +2740,7 @@ attribute-sets:
       -
         name: key-cfm
         type: nest
-        nested-attributes: tc-flower-key-cfm-attrs
+        nested-attributes: flower-key-cfm-attrs
       -
         name: key-spi
         type: u32
@@ -2769,35 +2753,37 @@ attribute-sets:
         name: key-enc-flags
         type: u32
         byte-order: big-endian
-        enum: tc-flower-key-ctrl-flags
+        enum: flower-key-ctrl-flags
         enum-as-flags: true
       -
         name: key-enc-flags-mask
         type: u32
         byte-order: big-endian
-        enum: tc-flower-key-ctrl-flags
+        enum: flower-key-ctrl-flags
         enum-as-flags: true
   -
-    name: tc-flower-key-enc-opts-attrs
+    name: flower-key-enc-opts-attrs
+    name-prefix: tca-flower-key-enc-opts-
     attributes:
       -
         name: geneve
         type: nest
-        nested-attributes: tc-flower-key-enc-opt-geneve-attrs
+        nested-attributes: flower-key-enc-opt-geneve-attrs
       -
         name: vxlan
         type: nest
-        nested-attributes: tc-flower-key-enc-opt-vxlan-attrs
+        nested-attributes: flower-key-enc-opt-vxlan-attrs
       -
         name: erspan
         type: nest
-        nested-attributes: tc-flower-key-enc-opt-erspan-attrs
+        nested-attributes: flower-key-enc-opt-erspan-attrs
       -
         name: gtp
         type: nest
-        nested-attributes: tc-flower-key-enc-opt-gtp-attrs
+        nested-attributes: flower-key-enc-opt-gtp-attrs
   -
-    name: tc-flower-key-enc-opt-geneve-attrs
+    name: flower-key-enc-opt-geneve-attrs
+    name-prefix: tca-flower-key-enc-opt-geneve-
     attributes:
       -
         name: class
@@ -2809,13 +2795,15 @@ attribute-sets:
         name: data
         type: binary
   -
-    name: tc-flower-key-enc-opt-vxlan-attrs
+    name: flower-key-enc-opt-vxlan-attrs
+    name-prefix: tca-flower-key-enc-opt-vxlan-
     attributes:
       -
         name: gbp
         type: u32
   -
-    name: tc-flower-key-enc-opt-erspan-attrs
+    name: flower-key-enc-opt-erspan-attrs
+    name-prefix: tca-flower-key-enc-opt-erspan-
     attributes:
       -
         name: ver
@@ -2830,7 +2818,8 @@ attribute-sets:
         name: hwid
         type: u8
   -
-    name: tc-flower-key-enc-opt-gtp-attrs
+    name: flower-key-enc-opt-gtp-attrs
+    name-prefix: tca-flower-key-enc-opt-gtp-
     attributes:
       -
         name: pdu-type
@@ -2839,7 +2828,9 @@ attribute-sets:
         name: qfi
         type: u8
   -
-    name: tc-flower-key-mpls-opt-attrs
+    name: flower-key-mpls-opt-attrs
+    name-prefix: tca-flower-key-mpls-opt-
+    attr-max-name: tca-flower-key-mpls-opt-lse-max
     attributes:
       -
         name: lse-depth
@@ -2857,7 +2848,8 @@ attribute-sets:
         name: lse-label
         type: u32
   -
-    name: tc-flower-key-cfm-attrs
+    name: flower-key-cfm-attrs
+    name-prefix: tca-flower-key-cfm-
     attributes:
       -
         name: md-level
@@ -2866,7 +2858,8 @@ attribute-sets:
         name: opcode
         type: u8
   -
-    name: tc-fw-attrs
+    name: fw-attrs
+    name-prefix: tca-fw-
     attributes:
       -
         name: classid
@@ -2874,7 +2867,7 @@ attribute-sets:
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: indev
         type: string
@@ -2882,12 +2875,13 @@ attribute-sets:
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: mask
         type: u32
   -
-    name: tc-gred-attrs
+    name: gred-attrs
+    name-prefix: tca-gred-
     attributes:
       -
         name: parms
@@ -2913,6 +2907,7 @@ attribute-sets:
         nested-attributes: tca-gred-vq-list-attrs
   -
     name: tca-gred-vq-list-attrs
+    name-prefix: tca-gred-vq-
     attributes:
       -
         name: entry
@@ -2921,6 +2916,7 @@ attribute-sets:
         multi-attr: true
   -
     name: tca-gred-vq-entry-attrs
+    name-prefix: tca-gred-vq-
     attributes:
       -
         name: pad
@@ -2959,7 +2955,7 @@ attribute-sets:
         name: flags
         type: u32
   -
-    name: tc-hfsc-attrs
+    name: hfsc-attrs
     attributes:
       -
         name: rsc
@@ -2971,7 +2967,8 @@ attribute-sets:
         name: usc
         type: binary
   -
-    name: tc-hhf-attrs
+    name: hhf-attrs
+    name-prefix: tca-hhf-
     attributes:
       -
         name: backlog-limit
@@ -2995,7 +2992,8 @@ attribute-sets:
         name: non-hh-weight
         type: u32
   -
-    name: tc-htb-attrs
+    name: htb-attrs
+    name-prefix: tca-htb-
     attributes:
       -
         name: parms
@@ -3027,7 +3025,8 @@ attribute-sets:
         name: offload
         type: flag
   -
-    name: tc-matchall-attrs
+    name: matchall-attrs
+    name-prefix: tca-matchall-
     attributes:
       -
         name: classid
@@ -3036,7 +3035,7 @@ attribute-sets:
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: flags
         type: u32
@@ -3048,14 +3047,16 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-etf-attrs
+    name: etf-attrs
+    name-prefix: tca-etf-
     attributes:
       -
         name: parms
         type: binary
         struct: tc-etf-qopt
   -
-    name: tc-ets-attrs
+    name: ets-attrs
+    name-prefix: tca-ets-
     attributes:
       -
         name: nbands
@@ -3066,7 +3067,7 @@ attribute-sets:
       -
         name: quanta
         type: nest
-        nested-attributes: tc-ets-attrs
+        nested-attributes: ets-attrs
       -
         name: quanta-band
         type: u32
@@ -3074,13 +3075,14 @@ attribute-sets:
       -
         name: priomap
         type: nest
-        nested-attributes: tc-ets-attrs
+        nested-attributes: ets-attrs
       -
         name: priomap-band
         type: u8
         multi-attr: true
   -
-    name: tc-fq-attrs
+    name: fq-attrs
+    name-prefix: tca-fq-
     attributes:
       -
         name: plimit
@@ -3151,7 +3153,8 @@ attribute-sets:
         sub-type: s32
         doc: Weights for each band
   -
-    name: tc-fq-codel-attrs
+    name: fq-codel-attrs
+    name-prefix: tca-fq-codel-
     attributes:
       -
         name: target
@@ -3187,7 +3190,8 @@ attribute-sets:
         name: ce-threshold-mask
         type: u8
   -
-    name: tc-fq-pie-attrs
+    name: fq-pie-attrs
+    name-prefix: tca-fq-pie-
     attributes:
       -
         name: limit
@@ -3226,7 +3230,8 @@ attribute-sets:
         name: dq-rate-estimator
         type: u32
   -
-    name: tc-netem-attrs
+    name: netem-attrs
+    name-prefix: tca-netem-
     attributes:
       -
         name: corr
@@ -3247,7 +3252,7 @@ attribute-sets:
       -
         name: loss
         type: nest
-        nested-attributes: tc-netem-loss-attrs
+        nested-attributes: netem-loss-attrs
       -
         name: rate
         type: binary
@@ -3279,7 +3284,8 @@ attribute-sets:
         name: prng-seed
         type: u64
   -
-    name: tc-netem-loss-attrs
+    name: netem-loss-attrs
+    name-prefix: netem-loss-
     attributes:
       -
         name: gi
@@ -3292,7 +3298,8 @@ attribute-sets:
         doc: Gilbert Elliot models
         struct: tc-netem-gemodel
   -
-    name: tc-pie-attrs
+    name: pie-attrs
+    name-prefix: tca-pie-
     attributes:
       -
         name: target
@@ -3319,7 +3326,8 @@ attribute-sets:
         name: dq-rate-estimator
         type: u32
   -
-    name: tc-police-attrs
+    name: police-attrs
+    name-prefix: tca-police-
     attributes:
       -
         name: tbf
@@ -3327,10 +3335,10 @@ attribute-sets:
         struct: tc-police
       -
         name: rate
-        type: binary
+        type: binary # TODO
       -
         name: peakrate
-        type: binary
+        type: binary # TODO
       -
         name: avrate
         type: u32
@@ -3357,7 +3365,8 @@ attribute-sets:
         name: pktburst64
         type: u64
   -
-    name: tc-qfq-attrs
+    name: qfq-attrs
+    name-prefix: tca-qfq-
     attributes:
       -
         name: weight
@@ -3366,7 +3375,8 @@ attribute-sets:
         name: lmax
         type: u32
   -
-    name: tc-red-attrs
+    name: red-attrs
+    name-prefix: tca-red-
     attributes:
       -
         name: parms
@@ -3388,7 +3398,8 @@ attribute-sets:
         name: mark-block
         type: u32
   -
-    name: tc-route-attrs
+    name: route-attrs
+    name-prefix: tca-route4-
     attributes:
       -
         name: classid
@@ -3405,14 +3416,15 @@ attribute-sets:
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
   -
-    name: tc-taprio-attrs
+    name: taprio-attrs
+    name-prefix: tca-taprio-attr-
     attributes:
       -
         name: priomap
@@ -3421,14 +3433,14 @@ attribute-sets:
       -
         name: sched-entry-list
         type: nest
-        nested-attributes: tc-taprio-sched-entry-list
+        nested-attributes: taprio-sched-entry-list
       -
         name: sched-base-time
         type: s64
       -
         name: sched-single-entry
         type: nest
-        nested-attributes: tc-taprio-sched-entry
+        nested-attributes: taprio-sched-entry
       -
         name: sched-clockid
         type: s32
@@ -3453,17 +3465,19 @@ attribute-sets:
       -
         name: tc-entry
         type: nest
-        nested-attributes: tc-taprio-tc-entry-attrs
+        nested-attributes: taprio-tc-entry-attrs
   -
-    name: tc-taprio-sched-entry-list
+    name: taprio-sched-entry-list
+    name-prefix: tca-taprio-sched-
     attributes:
       -
         name: entry
         type: nest
-        nested-attributes: tc-taprio-sched-entry
+        nested-attributes: taprio-sched-entry
         multi-attr: true
   -
-    name: tc-taprio-sched-entry
+    name: taprio-sched-entry
+    name-prefix: tca-taprio-sched-entry-
     attributes:
       -
         name: index
@@ -3478,7 +3492,8 @@ attribute-sets:
         name: interval
         type: u32
   -
-    name: tc-taprio-tc-entry-attrs
+    name: taprio-tc-entry-attrs
+    name-prefix: tca-taprio-tc-entry-
     attributes:
       -
         name: index
@@ -3490,7 +3505,8 @@ attribute-sets:
         name: fp
         type: u32
   -
-    name: tc-tbf-attrs
+    name: tbf-attrs
+    name-prefix: tca-tbf-
     attributes:
       -
         name: parms
@@ -3518,7 +3534,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-sample-attrs
+    name: act-sample-attrs
+    name-prefix: tca-sample-
+    header: linux/tc_act/tc_sample.h
     attributes:
       -
         name: tm
@@ -3527,7 +3545,7 @@ attribute-sets:
       -
         name: parms
         type: binary
-        struct: tc-gen
+        struct: tc-gact
       -
         name: rate
         type: u32
@@ -3541,7 +3559,9 @@ attribute-sets:
         name: pad
         type: pad
   -
-    name: tc-act-gact-attrs
+    name: act-gact-attrs
+    name-prefix: tca-gact-
+    header: linux/tc_act/tc_gact.h
     attributes:
       -
         name: tm
@@ -3550,7 +3570,7 @@ attribute-sets:
       -
         name: parms
         type: binary
-        struct: tc-gen
+        struct: tc-gact
       -
         name: prob
         type: binary
@@ -3560,6 +3580,7 @@ attribute-sets:
         type: pad
   -
     name: tca-stab-attrs
+    name-prefix: tca-stab-
     attributes:
       -
         name: base
@@ -3570,6 +3591,8 @@ attribute-sets:
         type: binary
   -
     name: tca-stats-attrs
+    name-prefix: tca-stats-
+    header: linux/gen_stats.h
     attributes:
       -
         name: basic
@@ -3603,7 +3626,8 @@ attribute-sets:
         name: pkt64
         type: u64
   -
-    name: tc-u32-attrs
+    name: u32-attrs
+    name-prefix: tca-u32-
     attributes:
       -
         name: classid
@@ -3624,12 +3648,12 @@ attribute-sets:
       -
         name: police
         type: nest
-        nested-attributes: tc-police-attrs
+        nested-attributes: police-attrs
       -
         name: act
         type: indexed-array
         sub-type: nest
-        nested-attributes: tc-act-attrs
+        nested-attributes: act-attrs
       -
         name: indev
         type: string
@@ -3650,78 +3674,78 @@ attribute-sets:
 
 sub-messages:
   -
-    name: tc-options-msg
+    name: options-msg
     formats:
       -
         value: basic
-        attribute-set: tc-basic-attrs
+        attribute-set: basic-attrs
       -
         value: bpf
-        attribute-set: tc-bpf-attrs
+        attribute-set: bpf-attrs
       -
         value: bfifo
         fixed-header: tc-fifo-qopt
       -
         value: cake
-        attribute-set: tc-cake-attrs
+        attribute-set: cake-attrs
       -
         value: cbs
-        attribute-set: tc-cbs-attrs
+        attribute-set: cbs-attrs
       -
         value: cgroup
-        attribute-set: tc-cgroup-attrs
+        attribute-set: cgroup-attrs
       -
         value: choke
-        attribute-set: tc-choke-attrs
+        attribute-set: choke-attrs
       -
         value: clsact # no content
       -
         value: codel
-        attribute-set: tc-codel-attrs
+        attribute-set: codel-attrs
       -
         value: drr
-        attribute-set: tc-drr-attrs
+        attribute-set: drr-attrs
       -
         value: etf
-        attribute-set: tc-etf-attrs
+        attribute-set: etf-attrs
       -
         value: ets
-        attribute-set: tc-ets-attrs
+        attribute-set: ets-attrs
       -
         value: flow
-        attribute-set: tc-flow-attrs
+        attribute-set: flow-attrs
       -
         value: flower
-        attribute-set: tc-flower-attrs
+        attribute-set: flower-attrs
       -
         value: fq
-        attribute-set: tc-fq-attrs
+        attribute-set: fq-attrs
       -
         value: fq_codel
-        attribute-set: tc-fq-codel-attrs
+        attribute-set: fq-codel-attrs
       -
         value: fq_pie
-        attribute-set: tc-fq-pie-attrs
+        attribute-set: fq-pie-attrs
       -
         value: fw
-        attribute-set: tc-fw-attrs
+        attribute-set: fw-attrs
       -
         value: gred
-        attribute-set: tc-gred-attrs
+        attribute-set: gred-attrs
       -
         value: hfsc
         fixed-header: tc-hfsc-qopt
       -
         value: hhf
-        attribute-set: tc-hhf-attrs
+        attribute-set: hhf-attrs
       -
         value: htb
-        attribute-set: tc-htb-attrs
+        attribute-set: htb-attrs
       -
         value: ingress # no content
       -
         value: matchall
-        attribute-set: tc-matchall-attrs
+        attribute-set: matchall-attrs
       -
         value: mq # no content
       -
@@ -3733,7 +3757,7 @@ sub-messages:
       -
         value: netem
         fixed-header: tc-netem-qopt
-        attribute-set: tc-netem-attrs
+        attribute-set: netem-attrs
       -
         value: pfifo
         fixed-header: tc-fifo-qopt
@@ -3745,7 +3769,7 @@ sub-messages:
         fixed-header: tc-fifo-qopt
       -
         value: pie
-        attribute-set: tc-pie-attrs
+        attribute-set: pie-attrs
       -
         value: plug
         fixed-header: tc-plug-qopt
@@ -3754,13 +3778,13 @@ sub-messages:
         fixed-header: tc-prio-qopt
       -
         value: qfq
-        attribute-set: tc-qfq-attrs
+        attribute-set: qfq-attrs
       -
         value: red
-        attribute-set: tc-red-attrs
+        attribute-set: red-attrs
       -
         value: route
-        attribute-set: tc-route-attrs
+        attribute-set: route-attrs
       -
         value: sfb
         fixed-header: tc-sfb-qopt
@@ -3769,79 +3793,79 @@ sub-messages:
         fixed-header: tc-sfq-qopt-v1
       -
         value: taprio
-        attribute-set: tc-taprio-attrs
+        attribute-set: taprio-attrs
       -
         value: tbf
-        attribute-set: tc-tbf-attrs
+        attribute-set: tbf-attrs
       -
         value: u32
-        attribute-set: tc-u32-attrs
+        attribute-set: u32-attrs
   -
-    name: tc-act-options-msg
+    name: act-options-msg
     formats:
       -
         value: bpf
-        attribute-set: tc-act-bpf-attrs
+        attribute-set: act-bpf-attrs
       -
         value: connmark
-        attribute-set: tc-act-connmark-attrs
+        attribute-set: act-connmark-attrs
       -
         value: csum
-        attribute-set: tc-act-csum-attrs
+        attribute-set: act-csum-attrs
       -
         value: ct
-        attribute-set: tc-act-ct-attrs
+        attribute-set: act-ct-attrs
       -
         value: ctinfo
-        attribute-set: tc-act-ctinfo-attrs
+        attribute-set: act-ctinfo-attrs
       -
         value: gact
-        attribute-set: tc-act-gact-attrs
+        attribute-set: act-gact-attrs
       -
         value: gate
-        attribute-set: tc-act-gate-attrs
+        attribute-set: act-gate-attrs
       -
         value: ife
-        attribute-set: tc-act-ife-attrs
+        attribute-set: act-ife-attrs
       -
         value: mirred
-        attribute-set: tc-act-mirred-attrs
+        attribute-set: act-mirred-attrs
       -
         value: mpls
-        attribute-set: tc-act-mpls-attrs
+        attribute-set: act-mpls-attrs
       -
         value: nat
-        attribute-set: tc-act-nat-attrs
+        attribute-set: act-nat-attrs
       -
         value: pedit
-        attribute-set: tc-act-pedit-attrs
+        attribute-set: act-pedit-attrs
       -
         value: police
-        attribute-set: tc-act-police-attrs
+        attribute-set: police-attrs
       -
         value: sample
-        attribute-set: tc-act-sample-attrs
+        attribute-set: act-sample-attrs
       -
         value: simple
-        attribute-set: tc-act-simple-attrs
+        attribute-set: act-simple-attrs
       -
         value: skbedit
-        attribute-set: tc-act-skbedit-attrs
+        attribute-set: act-skbedit-attrs
       -
         value: skbmod
-        attribute-set: tc-act-skbmod-attrs
+        attribute-set: act-skbmod-attrs
       -
         value: tunnel_key
-        attribute-set: tc-act-tunnel-key-attrs
+        attribute-set: act-tunnel-key-attrs
       -
         value: vlan
-        attribute-set: tc-act-vlan-attrs
+        attribute-set: act-vlan-attrs
   -
     name: tca-stats-app-msg
     formats:
       -
         value: cake
-        attribute-set: tc-cake-stats-attrs
+        attribute-set: cake-stats-attrs
       -
         value: choke
         fixed-header: tc-choke-xstats
@@ -3875,11 +3899,12 @@ sub-messages:
 
 operations:
   enum-model: directional
+  name-prefix: rtm-
   list:
     -
       name: newqdisc
       doc: Create new tc qdisc.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3894,7 +3919,7 @@ operations:
     -
       name: delqdisc
       doc: Delete existing tc qdisc.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3902,9 +3927,9 @@ operations:
     -
       name: getqdisc
       doc: Get / dump tc qdisc information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
-      do:
+      do: &getqdisc-do
         request:
           value: 38
           attributes:
@@ -3923,10 +3948,11 @@ operations:
             - chain
             - ingress-block
             - egress-block
+      dump: *getqdisc-do
     -
       name: newtclass
       doc: Get / dump tc traffic class information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3935,7 +3961,7 @@ operations:
     -
       name: deltclass
       doc: Get / dump tc traffic class information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3943,7 +3969,7 @@ operations:
     -
       name: gettclass
       doc: Get / dump tc traffic class information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3954,7 +3980,7 @@ operations:
     -
       name: newtfilter
       doc: Get / dump tc filter information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3963,7 +3989,7 @@ operations:
     -
       name: deltfilter
       doc: Get / dump tc filter information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3974,7 +4000,7 @@ operations:
     -
       name: gettfilter
       doc: Get / dump tc filter information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -3997,7 +4023,7 @@ operations:
     -
       name: newchain
       doc: Get / dump tc chain information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -4006,7 +4032,7 @@ operations:
     -
       name: delchain
       doc: Get / dump tc chain information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
@@ -4016,7 +4042,7 @@ operations:
     -
       name: getchain
       doc: Get / dump tc chain information.
-      attribute-set: tc-attrs
+      attribute-set: attrs
       fixed-header: tcmsg
       do:
         request:
diff --git linux-libre-6.15-gnu/Documentation/networking/arcnet-hardware.rst linux-libre-6.16-gnu/Documentation/networking/arcnet-hardware.rst
index 982215723582..3bf7f99cd7bb 100644
--- linux-libre-6.15-gnu/Documentation/networking/arcnet-hardware.rst
+++ linux-libre-6.16-gnu/Documentation/networking/arcnet-hardware.rst
@@ -3152,7 +3152,7 @@ Tiara
 (model unknown)
 ---------------
 
-  - from Christoph Lameter <christoph@lameter.com>
+  - from Christoph Lameter <cl@gentwo.org>
 
 
 Here is information about my card as far as I could figure it out::
diff --git linux-libre-6.15-gnu/Documentation/networking/dccp.rst linux-libre-6.16-gnu/Documentation/networking/dccp.rst
deleted file mode 100644
index 91e5c33ba3ff..000000000000
--- linux-libre-6.15-gnu/Documentation/networking/dccp.rst
+++ /dev/null
@@ -1,219 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=============
-DCCP protocol
-=============
-
-
-.. Contents
-   - Introduction
-   - Missing features
-   - Socket options
-   - Sysctl variables
-   - IOCTLs
-   - Other tunables
-   - Notes
-
-
-Introduction
-============
-Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
-oriented protocol designed to solve issues present in UDP and TCP, particularly
-for real-time and multimedia (streaming) traffic.
-It divides into a base protocol (RFC 4340) and pluggable congestion control
-modules called CCIDs. Like pluggable TCP congestion control, at least one CCID
-needs to be enabled in order for the protocol to function properly. In the Linux
-implementation, this is the TCP-like CCID2 (RFC 4341). Additional CCIDs, such as
-the TCP-friendly CCID3 (RFC 4342), are optional.
-For a brief introduction to CCIDs and suggestions for choosing a CCID to match
-given applications, see section 10 of RFC 4340.
-
-It has a base protocol and pluggable congestion control IDs (CCIDs).
-
-DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
-is at http://www.ietf.org/html.charters/dccp-charter.html
-
-
-Missing features
-================
-The Linux DCCP implementation does not currently support all the features that are
-specified in RFCs 4340...42.
-
-The known bugs are at:
-
-	http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP
-
-For more up-to-date versions of the DCCP implementation, please consider using
-the experimental DCCP test tree; instructions for checking this out are on:
-http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree
-
-
-Socket options
-==============
-DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes
-a policy ID as argument and can only be set before the connection (i.e. changes
-during an established connection are not supported). Currently, two policies are
-defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special,
-and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an
-u32 priority value as ancillary data to sendmsg(), where higher numbers indicate
-a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to
-be formatted using a cmsg(3) message header filled in as follows::
-
-	cmsg->cmsg_level = SOL_DCCP;
-	cmsg->cmsg_type	 = DCCP_SCM_PRIORITY;
-	cmsg->cmsg_len	 = CMSG_LEN(sizeof(uint32_t));	/* or CMSG_LEN(4) */
-
-DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero
-value is always interpreted as unbounded queue length. If different from zero,
-the interpretation of this parameter depends on the current dequeuing policy
-(see above): the "simple" policy will enforce a fixed queue size by returning
-EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the
-lowest-priority packet first. The default value for this parameter is
-initialised from /proc/sys/net/dccp/default/tx_qlen.
-
-DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
-service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
-the socket will fall back to 0 (which means that no meaningful service code
-is present). On active sockets this is set before connect(); specifying more
-than one code has no effect (all subsequent service codes are ignored). The
-case is different for passive sockets, where multiple service codes (up to 32)
-can be set before calling bind().
-
-DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
-size (application payload size) in bytes, see RFC 4340, section 14.
-
-DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
-supported by the endpoint. The option value is an array of type uint8_t whose
-size is passed as option length. The minimum array size is 4 elements, the
-value returned in the optlen argument always reflects the true number of
-built-in CCIDs.
-
-DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
-time, combining the operation of the next two socket options. This option is
-preferable over the latter two, since often applications will use the same
-type of CCID for both directions; and mixed use of CCIDs is not currently well
-understood. This socket option takes as argument at least one uint8_t value, or
-an array of uint8_t values, which must match available CCIDS (see above). CCIDs
-must be registered on the socket before calling connect() or listen().
-
-DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
-the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
-Please note that the getsockopt argument type here is ``int``, not uint8_t.
-
-DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
-
-DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
-timewait state when closing the connection (RFC 4340, 8.3). The usual case is
-that the closing server sends a CloseReq, whereupon the client holds timewait
-state. When this boolean socket option is on, the server sends a Close instead
-and will enter TIMEWAIT. This option must be set after accept() returns.
-
-DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
-partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
-always cover the entire packet and that only fully covered application data is
-accepted by the receiver. Hence, when using this feature on the sender, it must
-be enabled at the receiver, too with suitable choice of CsCov.
-
-DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
-	range 0..15 are acceptable. The default setting is 0 (full coverage),
-	values between 1..15 indicate partial coverage.
-
-DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
-	sets a threshold, where again values 0..15 are acceptable. The default
-	of 0 means that all packets with a partial coverage will be discarded.
-	Values in the range 1..15 indicate that packets with minimally such a
-	coverage value are also acceptable. The higher the number, the more
-	restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
-	settings are inherited to the child socket after accept().
-
-The following two options apply to CCID 3 exclusively and are getsockopt()-only.
-In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
-
-DCCP_SOCKOPT_CCID_RX_INFO
-	Returns a ``struct tfrc_rx_info`` in optval; the buffer for optval and
-	optlen must be set to at least sizeof(struct tfrc_rx_info).
-
-DCCP_SOCKOPT_CCID_TX_INFO
-	Returns a ``struct tfrc_tx_info`` in optval; the buffer for optval and
-	optlen must be set to at least sizeof(struct tfrc_tx_info).
-
-On unidirectional connections it is useful to close the unused half-connection
-via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
-
-
-Sysctl variables
-================
-Several DCCP default parameters can be managed by the following sysctls
-(sysctl net.dccp.default or /proc/sys/net/dccp/default):
-
-request_retries
-	The number of active connection initiation retries (the number of
-	Requests minus one) before timing out. In addition, it also governs
-	the behaviour of the other, passive side: this variable also sets
-	the number of times DCCP repeats sending a Response when the initial
-	handshake does not progress from RESPOND to OPEN (i.e. when no Ack
-	is received after the initial Request).  This value should be greater
-	than 0, suggested is less than 10. Analogue of tcp_syn_retries.
-
-retries1
-	How often a DCCP Response is retransmitted until the listening DCCP
-	side considers its connecting peer dead. Analogue of tcp_retries1.
-
-retries2
-	The number of times a general DCCP packet is retransmitted. This has
-	importance for retransmitted acknowledgments and feature negotiation,
-	data packets are never retransmitted. Analogue of tcp_retries2.
-
-tx_ccid = 2
-	Default CCID for the sender-receiver half-connection. Depending on the
-	choice of CCID, the Send Ack Vector feature is enabled automatically.
-
-rx_ccid = 2
-	Default CCID for the receiver-sender half-connection; see tx_ccid.
-
-seq_window = 100
-	The initial sequence window (sec. 7.5.2) of the sender. This influences
-	the local ackno validity and the remote seqno validity windows (7.5.1).
-	Values in the range Wmin = 32 (RFC 4340, 7.5.2) up to 2^32-1 can be set.
-
-tx_qlen = 5
-	The size of the transmit buffer in packets. A value of 0 corresponds
-	to an unbounded transmit buffer.
-
-sync_ratelimit = 125 ms
-	The timeout between subsequent DCCP-Sync packets sent in response to
-	sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
-	of this parameter is milliseconds; a value of 0 disables rate-limiting.
-
-
-IOCTLS
-======
-FIONREAD
-	Works as in udp(7): returns in the ``int`` argument pointer the size of
-	the next pending datagram in bytes, or 0 when no datagram is pending.
-
-SIOCOUTQ
-	Returns the number of unsent data bytes in the socket send queue as ``int``
-	into the buffer specified by the argument pointer.
-
-Other tunables
-==============
-Per-route rto_min support
-	CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value
-	of the RTO timer. This setting can be modified via the 'rto_min' option
-	of iproute2; for example::
-
-		> ip route change 10.0.0.0/24   rto_min 250j dev wlan0
-		> ip route add    10.0.0.254/32 rto_min 800j dev wlan0
-		> ip route show dev wlan0
-
-	CCID-3 also supports the rto_min setting: it is used to define the lower
-	bound for the expiry of the nofeedback timer. This can be useful on LANs
-	with very low RTTs (e.g., loopback, Gbit ethernet).
-
-
-Notes
-=====
-DCCP does not travel through NAT successfully at present on many boxes. This is
-because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
-support for DCCP has been added.
diff --git linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
new file mode 100644
index 000000000000..e3dfd083fa52
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
@@ -0,0 +1,137 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================================================
+Linux kernel driver for Huawei Ethernet Device Driver (hinic3) family
+=====================================================================
+
+Overview
+========
+
+The hinic3 is a network interface card (NIC) for Data Center. It supports
+a range of link-speed devices (10GE, 25GE, 100GE, etc.). The hinic3
+devices can have multiple physical forms: LOM (Lan on Motherboard) NIC,
+PCIe standard NIC, OCP (Open Compute Project) NIC, etc.
+
+The hinic3 driver supports the following features:
+- IPv4/IPv6 TCP/UDP checksum offload
+- TSO (TCP Segmentation Offload), LRO (Large Receive Offload)
+- RSS (Receive Side Scaling)
+- MSI-X interrupt aggregation configuration and interrupt adaptation.
+- SR-IOV (Single Root I/O Virtualization).
+
+Content
+=======
+
+- Supported PCI vendor ID/device IDs
+- Source Code Structure of Hinic3 Driver
+- Management Interface
+
+Supported PCI vendor ID/device IDs
+==================================
+
+19e5:0222 - hinic3 PF/PPF
+19e5:375F - hinic3 VF
+
+Prime Physical Function (PPF) is responsible for the management of the
+whole NIC card. For example, clock synchronization between the NIC and
+the host. Any PF may serve as a PPF. The PPF is selected dynamically.
+
+Source Code Structure of Hinic3 Driver
+======================================
+
+========================  ================================================
+hinic3_pci_id_tbl.h       Supported device IDs
+hinic3_hw_intf.h          Interface between HW and driver
+hinic3_queue_common.[ch]  Common structures and methods for NIC queues
+hinic3_common.[ch]        Encapsulation of memory operations in Linux
+hinic3_csr.h              Register definitions in the BAR
+hinic3_hwif.[ch]          Interface for BAR
+hinic3_eqs.[ch]           Interface for AEQs and CEQs
+hinic3_mbox.[ch]          Interface for mailbox
+hinic3_mgmt.[ch]          Management interface based on mailbox and AEQ
+hinic3_wq.[ch]            Work queue data structures and interface
+hinic3_cmdq.[ch]          Command queue is used to post command to HW
+hinic3_hwdev.[ch]         HW structures and methods abstractions
+hinic3_lld.[ch]           Auxiliary driver adaptation layer
+hinic3_hw_comm.[ch]       Interface for common HW operations
+hinic3_mgmt_interface.h   Interface between firmware and driver
+hinic3_hw_cfg.[ch]        Interface for HW configuration
+hinic3_irq.c              Interrupt request
+hinic3_netdev_ops.c       Operations registered to Linux kernel stack
+hinic3_nic_dev.h          NIC structures and methods abstractions
+hinic3_main.c             Main Linux kernel driver
+hinic3_nic_cfg.[ch]       NIC service configuration
+hinic3_nic_io.[ch]        Management plane interface for TX and RX
+hinic3_rss.[ch]           Interface for Receive Side Scaling (RSS)
+hinic3_rx.[ch]            Interface for transmit
+hinic3_tx.[ch]            Interface for receive
+hinic3_ethtool.c          Interface for ethtool operations (ops)
+hinic3_filter.c           Interface for MAC address
+========================  ================================================
+
+Management Interface
+====================
+
+Asynchronous Event Queue (AEQ)
+------------------------------
+
+AEQ receives high priority events from the HW over a descriptor queue.
+Every descriptor is a fixed size of 64 bytes. AEQ can receive solicited or
+unsolicited events. Every device, VF or PF, can have up to 4 AEQs.
+Every AEQ is associated to a dedicated IRQ. AEQ can receive multiple types
+of events, but in practice the hinic3 driver ignores all events except for
+2 mailbox related events.
+
+Mailbox
+-------
+
+Mailbox is a communication mechanism between the hinic3 driver and the HW.
+Each device has an independent mailbox. Driver can use the mailbox to send
+requests to management. Driver receives mailbox messages, such as responses
+to requests, over the AEQ (using event HINIC3_AEQ_FOR_MBOX). Due to the
+limited size of mailbox data register, mailbox messages are sent
+segment-by-segment.
+
+Every device can use its mailbox to post request to firmware. The mailbox
+can also be used to post requests and responses between the PF and its VFs.
+
+Completion Event Queue (CEQ)
+----------------------------
+
+The implementation of CEQ is the same as AEQ. It receives completion events
+from HW over a fixed size descriptor of 32 bits. Every device can have up
+to 32 CEQs. Every CEQ has a dedicated IRQ. CEQ only receives solicited
+events that are responses to requests from the driver. CEQ can receive
+multiple types of events, but in practice the hinic3 driver ignores all
+events except for HINIC3_CMDQ that represents completion of previously
+posted commands on a cmdq.
+
+Command Queue (cmdq)
+--------------------
+
+Every cmdq has a dedicated work queue on which commands are posted.
+Commands on the work queue are fixed size descriptor of size 64 bytes.
+Completion of a command will be indicated using ctrl bits in the
+descriptor that carried the command. Notification of command completions
+will also be provided via event on CEQ. Every device has 4 command queues
+that are initialized as a set (called cmdqs), each with its own type.
+Hinic3 driver only uses type HINIC3_CMDQ_SYNC.
+
+Work Queues(WQ)
+---------------
+
+Work queues are logical arrays of fixed size WQEs. The array may be spread
+over multiple non-contiguous pages using indirection table. Work queues are
+used by I/O queues and command queues.
+
+Global function ID
+------------------
+
+Every function, PF or VF, has a unique ordinal identification within the device.
+Many management commands (mbox or cmdq) contain this ID so HW can apply the
+command effect to the right function.
+
+PF is allowed to post management commands to a subordinate VF by specifying the
+VFs ID. A VF must provide its own ID. Anti-spoofing in the HW will cause
+command from a VF to fail if it contains the wrong ID.
+
diff --git linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/index.rst linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/index.rst
index 05d822b904b4..139b4c75a191 100644
--- linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/index.rst
+++ linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/index.rst
@@ -28,6 +28,7 @@ Contents:
    freescale/gianfar
    google/gve
    huawei/hinic
+   huawei/hinic3
    intel/e100
    intel/e1000
    intel/e1000e
@@ -55,6 +56,7 @@ Contents:
    ti/cpsw_switchdev
    ti/am65_nuss_cpsw_switchdev
    ti/tlan
+   ti/icssg_prueth
    wangxun/txgbe
    wangxun/ngbe
 
diff --git linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
index af7db0e91f6b..a52850602cd8 100644
--- linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
+++ linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
@@ -66,7 +66,7 @@ Admin Function driver
 As mentioned above RVU PF0 is called the admin function (AF), this driver
 supports resource provisioning and configuration of functional blocks.
 Doesn't handle any I/O. It sets up few basic stuff but most of the
-funcionality is achieved via configuration requests from PFs and VFs.
+functionality is achieved via configuration requests from PFs and VFs.
 
 PF/VFs communicates with AF via a shared memory region (mailbox). Upon
 receiving requests AF does resource provisioning and other HW configuration.
diff --git linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/meta/fbnic.rst linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/meta/fbnic.rst
index 04e0595bb0a7..f8592dec8851 100644
--- linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/meta/fbnic.rst
+++ linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/meta/fbnic.rst
@@ -28,9 +28,60 @@ devlink dev info provides version information for all three components. In
 addition to the version the hg commit hash of the build is included as a
 separate entry.
 
+Upgrading Firmware
+------------------
+
+fbnic supports updating firmware using signed PLDM images with devlink dev
+flash. PLDM images are written into the flash. Flashing does not interrupt
+the operation of the device.
+
+On host boot the latest UEFI driver is always used, no explicit activation
+is required. Firmware activation is required to run new control firmware. cmrt
+firmware can only be activated by power cycling the NIC.
+
 Statistics
 ----------
 
+TX MAC Interface
+~~~~~~~~~~~~~~~~
+
+ - ``ptp_illegal_req``: packets sent to the NIC with PTP request bit set but routed to BMC/FW
+ - ``ptp_good_ts``: packets successfully routed to MAC with PTP request bit set
+ - ``ptp_bad_ts``: packets destined for MAC with PTP request bit set but aborted because of some error (e.g., DMA read error)
+
+TX Extension (TEI) Interface (TTI)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ - ``tti_cm_drop``: control messages dropped at the TX Extension (TEI) Interface because of credit starvation
+ - ``tti_frame_drop``: packets dropped at the TX Extension (TEI) Interface because of credit starvation
+ - ``tti_tbi_drop``: packets dropped at the TX BMC Interface (TBI) because of credit starvation
+
+RXB (RX Buffer) Enqueue
+~~~~~~~~~~~~~~~~~~~~~~~
+
+ - ``rxb_integrity_err[i]``: frames enqueued with integrity errors (e.g., multi-bit ECC errors) on RXB input i
+ - ``rxb_mac_err[i]``: frames enqueued with MAC end-of-frame errors (e.g., bad FCS) on RXB input i
+ - ``rxb_parser_err[i]``: frames experienced RPC parser errors
+ - ``rxb_frm_err[i]``: frames experienced signaling errors (e.g., missing end-of-packet/start-of-packet) on RXB input i
+ - ``rxb_drbo[i]_frames``: frames received at RXB input i
+ - ``rxb_drbo[i]_bytes``: bytes received at RXB input i
+
+RXB (RX Buffer) FIFO
+~~~~~~~~~~~~~~~~~~~~
+
+ - ``rxb_fifo[i]_drop``: transitions into the drop state on RXB pool i
+ - ``rxb_fifo[i]_dropped_frames``: frames dropped on RXB pool i
+ - ``rxb_fifo[i]_ecn``: transitions into the ECN mark state on RXB pool i
+ - ``rxb_fifo[i]_level``: current occupancy of RXB pool i
+
+RXB (RX Buffer) Dequeue
+~~~~~~~~~~~~~~~~~~~~~~~
+
+   - ``rxb_intf[i]_frames``: frames sent to the output i
+   - ``rxb_intf[i]_bytes``: bytes sent to the output i
+   - ``rxb_pbuf[i]_frames``: frames sent to output i from the perspective of internal packet buffer
+   - ``rxb_pbuf[i]_bytes``: bytes sent to output i from the perspective of internal packet buffer
+
 RPC (Rx parser)
 ~~~~~~~~~~~~~~~
 
@@ -44,6 +95,15 @@ RPC (Rx parser)
  - ``rpc_out_of_hdr_err``: frames where header was larger than parsable region
  - ``ovr_size_err``: oversized frames
 
+Hardware Queues
+~~~~~~~~~~~~~~~
+
+1. RX DMA Engine:
+
+ - ``rde_[i]_pkt_err``: packets with MAC EOP, RPC parser, RXB truncation, or RDE frame truncation errors. These error are flagged in the packet metadata because of cut-through support but the actual drop happens once PCIE/RDE is reached.
+ - ``rde_[i]_pkt_cq_drop``: packets dropped because RCQ is full
+ - ``rde_[i]_pkt_bdq_drop``: packets dropped because HPQ or PPQ ran out of host buffer
+
 PCIe
 ~~~~
 
diff --git linux-libre-6.15-gnu/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst
new file mode 100644
index 000000000000..da21ddf431bb
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================================
+Texas Instruments ICSSG PRUETH ethernet driver
+==============================================
+
+:Version: 1.0
+
+ICSSG Firmware
+==============
+
+Every ICSSG core has two Programmable Real-Time Unit(PRUs), two auxiliary
+Real-Time Transfer Unit (RTUs), and two Transmit Real-Time Transfer Units
+(TX_PRUs). Each one of these runs its own firmware. The firmwares combnined are
+referred as ICSSG Firmware.
+
+Firmware Statistics
+===================
+
+The ICSSG firmware maintains certain statistics which are dumped by the driver
+via ``ethtool -S <interface>``
+
+These statistics are as follows,
+
+ - ``FW_RTU_PKT_DROP``: Diagnostic error counter which increments when RTU drops a locally injected packet due to port being disabled or rule violation.
+ - ``FW_Q0_OVERFLOW``: TX overflow counter for queue0
+ - ``FW_Q1_OVERFLOW``: TX overflow counter for queue1
+ - ``FW_Q2_OVERFLOW``: TX overflow counter for queue2
+ - ``FW_Q3_OVERFLOW``: TX overflow counter for queue3
+ - ``FW_Q4_OVERFLOW``: TX overflow counter for queue4
+ - ``FW_Q5_OVERFLOW``: TX overflow counter for queue5
+ - ``FW_Q6_OVERFLOW``: TX overflow counter for queue6
+ - ``FW_Q7_OVERFLOW``: TX overflow counter for queue7
+ - ``FW_DROPPED_PKT``: This counter is incremented when a packet is dropped at PRU because of rule violation.
+ - ``FW_RX_ERROR``: Incremented if there was a CRC error or Min/Max frame error at PRU
+ - ``FW_RX_DS_INVALID``: Incremented when RTU detects Data Status invalid condition
+ - ``FW_TX_DROPPED_PACKET``: Counter for packets dropped via TX Port
+ - ``FW_TX_TS_DROPPED_PACKET``: Counter for packets with TS flag dropped via TX Port
+ - ``FW_INF_PORT_DISABLED``: Incremented when RX frame is dropped due to port being disabled
+ - ``FW_INF_SAV``: Incremented when RX frame is dropped due to Source Address violation
+ - ``FW_INF_SA_DL``: Incremented when RX frame is dropped due to Source Address being in the denylist
+ - ``FW_INF_PORT_BLOCKED``: Incremented when RX frame is dropped due to port being blocked and frame being a special frame
+ - ``FW_INF_DROP_TAGGED`` : Incremented when RX frame is dropped for being tagged
+ - ``FW_INF_DROP_PRIOTAGGED``: Incremented when RX frame is dropped for being priority tagged
+ - ``FW_INF_DROP_NOTAG``: Incremented when RX frame is dropped for being untagged
+ - ``FW_INF_DROP_NOTMEMBER``: Incremented when RX frame is dropped for port not being member of VLAN
+ - ``FW_RX_EOF_SHORT_FRMERR``: Incremented if End Of Frame (EOF) task is scheduled without seeing RX_B1
+ - ``FW_RX_B0_DROP_EARLY_EOF``: Incremented when frame is dropped due to Early EOF
+ - ``FW_TX_JUMBO_FRM_CUTOFF``: Incremented when frame is cut off to prevent packet size > 2000 Bytes
+ - ``FW_RX_EXP_FRAG_Q_DROP``: Incremented when express frame is received in the same queue as the previous fragment
+ - ``FW_RX_FIFO_OVERRUN``: RX fifo overrun counter
+ - ``FW_CUT_THR_PKT``: Incremented when a packet is forwarded using Cut-Through forwarding method
+ - ``FW_HOST_RX_PKT_CNT``: Number of valid packets sent by Rx PRU to Host on PSI
+ - ``FW_HOST_TX_PKT_CNT``: Number of valid packets copied by RTU0 to Tx queues
+ - ``FW_HOST_EGRESS_Q_PRE_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter
+ - ``FW_HOST_EGRESS_Q_EXP_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter
diff --git linux-libre-6.15-gnu/Documentation/networking/devlink/devlink-info.rst linux-libre-6.16-gnu/Documentation/networking/devlink/devlink-info.rst
index 23073bc219d8..dd6adc4d0559 100644
--- linux-libre-6.15-gnu/Documentation/networking/devlink/devlink-info.rst
+++ linux-libre-6.16-gnu/Documentation/networking/devlink/devlink-info.rst
@@ -86,6 +86,10 @@ In case software/firmware components are loaded from the disk (e.g.
 ``/lib/firmware``) only the running version should be reported via
 the kernel API.
 
+Please note that any security versions reported via devlink are purely
+informational. Devlink does not use a secure channel to communicate with
+the device.
+
 Generic Versions
 ================
 
diff --git linux-libre-6.15-gnu/Documentation/networking/devlink/devlink-trap.rst linux-libre-6.16-gnu/Documentation/networking/devlink/devlink-trap.rst
index 2c14dfe69b3a..5885e21e2212 100644
--- linux-libre-6.15-gnu/Documentation/networking/devlink/devlink-trap.rst
+++ linux-libre-6.16-gnu/Documentation/networking/devlink/devlink-trap.rst
@@ -451,7 +451,7 @@ be added to the following table:
    * - ``udp_parsing``
      - ``drop``
      - Traps packets dropped due to an error in the UDP header parsing.
-       This packet trap could include checksum errorrs, an improper UDP
+       This packet trap could include checksum errors, an improper UDP
        length detected (smaller than 8 bytes) or detection of header
        truncation.
    * - ``tcp_parsing``
diff --git linux-libre-6.15-gnu/Documentation/networking/devlink/index.rst linux-libre-6.16-gnu/Documentation/networking/devlink/index.rst
index 948c8c44e233..8319f43b5933 100644
--- linux-libre-6.15-gnu/Documentation/networking/devlink/index.rst
+++ linux-libre-6.16-gnu/Documentation/networking/devlink/index.rst
@@ -84,6 +84,7 @@ parameters, info versions, and other features it supports.
    i40e
    ionic
    ice
+   ixgbe
    mlx4
    mlx5
    mlxsw
diff --git linux-libre-6.15-gnu/Documentation/networking/devlink/ixgbe.rst linux-libre-6.16-gnu/Documentation/networking/devlink/ixgbe.rst
new file mode 100644
index 000000000000..c27d1436c70e
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/networking/devlink/ixgbe.rst
@@ -0,0 +1,171 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+ixgbe devlink support
+=====================
+
+This document describes the devlink features implemented by the ``ixgbe``
+device driver.
+
+Info versions
+=============
+
+Any of the versions dealing with the security presented by ``devlink-info``
+is purely informational. Devlink does not use a secure channel to communicate
+with the device.
+
+The ``ixgbe`` driver reports the following versions
+
+.. list-table:: devlink info versions implemented
+    :widths: 5 5 5 90
+
+    * - Name
+      - Type
+      - Example
+      - Description
+    * - ``board.id``
+      - fixed
+      - H49289-000
+      - The Product Board Assembly (PBA) identifier of the board.
+    * - ``fw.undi``
+      - running
+      - 1.1937.0
+      - Version of the Option ROM containing the UEFI driver. The version is
+        reported in ``major.minor.patch`` format. The major version is
+        incremented whenever a major breaking change occurs, or when the
+        minor version would overflow. The minor version is incremented for
+        non-breaking changes and reset to 1 when the major version is
+        incremented. The patch version is normally 0 but is incremented when
+        a fix is delivered as a patch against an older base Option ROM.
+    * - ``fw.undi.srev``
+      - running
+      - 4
+      - Number indicating the security revision of the Option ROM.
+    * - ``fw.bundle_id``
+      - running
+      - 0x80000d0d
+      - Unique identifier of the firmware image file that was loaded onto
+        the device. Also referred to as the EETRACK identifier of the NVM.
+    * - ``fw.mgmt.api``
+      - running
+      - 1.5.1
+      - 3-digit version number (major.minor.patch) of the API exported over
+        the AdminQ by the management firmware. Used by the driver to
+        identify what commands are supported. Historical versions of the
+        kernel only displayed a 2-digit version number (major.minor).
+    * - ``fw.mgmt.build``
+      - running
+      - 0x305d955f
+      - Unique identifier of the source for the management firmware.
+    * - ``fw.mgmt.srev``
+      - running
+      - 3
+      - Number indicating the security revision of the firmware.
+    * - ``fw.psid.api``
+      - running
+      - 0.80
+      - Version defining the format of the flash contents.
+    * - ``fw.netlist``
+      - running
+      - 1.1.2000-6.7.0
+      - The version of the netlist module. This module defines the device's
+        Ethernet capabilities and default settings, and is used by the
+        management firmware as part of managing link and device
+        connectivity.
+    * - ``fw.netlist.build``
+      - running
+      - 0xee16ced7
+      - The first 4 bytes of the hash of the netlist module contents.
+
+Flash Update
+============
+
+The ``ixgbe`` driver implements support for flash update using the
+``devlink-flash`` interface. It supports updating the device flash using a
+combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and
+``fw.netlist`` components.
+
+.. list-table:: List of supported overwrite modes
+   :widths: 5 95
+
+   * - Bits
+     - Behavior
+   * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS``
+     - Do not preserve settings stored in the flash components being
+       updated. This includes overwriting the port configuration that
+       determines the number of physical functions the device will
+       initialize with.
+   * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS``
+     - Do not preserve either settings or identifiers. Overwrite everything
+       in the flash with the contents from the provided image, without
+       performing any preservation. This includes overwriting device
+       identifying fields such as the MAC address, Vital product Data (VPD) area,
+       and device serial number. It is expected that this combination be used with an
+       image customized for the specific device.
+
+Reload
+======
+
+The ``ixgbe`` driver supports activating new firmware after a flash update
+using ``DEVLINK_CMD_RELOAD`` with the ``DEVLINK_RELOAD_ACTION_FW_ACTIVATE``
+action.
+
+.. code:: shell
+
+    $ devlink dev reload pci/0000:01:00.0 reload action fw_activate
+
+The new firmware is activated by issuing a device specific Embedded
+Management Processor reset which requests the device to reset and reload the
+EMP firmware image.
+
+The driver does not currently support reloading the driver via
+``DEVLINK_RELOAD_ACTION_DRIVER_REINIT``.
+
+Regions
+=======
+
+The ``ixgbe`` driver implements the following regions for accessing internal
+device data.
+
+.. list-table:: regions implemented
+    :widths: 15 85
+
+    * - Name
+      - Description
+    * - ``nvm-flash``
+      - The contents of the entire flash chip, sometimes referred to as
+        the device's Non Volatile Memory.
+    * - ``shadow-ram``
+      - The contents of the Shadow RAM, which is loaded from the beginning
+        of the flash. Although the contents are primarily from the flash,
+        this area also contains data generated during device boot which is
+        not stored in flash.
+    * - ``device-caps``
+      - The contents of the device firmware's capabilities buffer. Useful to
+        determine the current state and configuration of the device.
+
+Both the ``nvm-flash`` and ``shadow-ram`` regions can be accessed without a
+snapshot. The ``device-caps`` region requires a snapshot as the contents are
+sent by firmware and can't be split into separate reads.
+
+Users can request an immediate capture of a snapshot for all three regions
+via the ``DEVLINK_CMD_REGION_NEW`` command.
+
+.. code:: shell
+
+    $ devlink region show
+    pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1
+    pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10
+
+    $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1
+
+    $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1
+    0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30
+    0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8
+    0000000000000020 0016 0bb8 0016 1720 0000 0000 c00f 3ffc
+    0000000000000030 bada cce5 bada cce5 bada cce5 bada cce5
+
+    $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16
+    0000000000000000 0014 95dc 0014 9514 0035 1670 0034 db30
+
+    $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1
diff --git linux-libre-6.15-gnu/Documentation/networking/devmem.rst linux-libre-6.16-gnu/Documentation/networking/devmem.rst
index eb678ca45496..a6cd7236bfbd 100644
--- linux-libre-6.15-gnu/Documentation/networking/devmem.rst
+++ linux-libre-6.16-gnu/Documentation/networking/devmem.rst
@@ -62,15 +62,15 @@ More Info
     https://lore.kernel.org/netdev/20240831004313.3713467-1-almasrymina@google.com/
 
 
-Interface
-=========
+RX Interface
+============
 
 
 Example
 -------
 
-tools/testing/selftests/net/ncdevmem.c:do_server shows an example of setting up
-the RX path of this API.
+./tools/testing/selftests/drivers/net/hw/ncdevmem:do_server shows an example of
+setting up the RX path of this API.
 
 
 NIC Setup
@@ -235,6 +235,148 @@ can be less than the tokens provided by the user in case of:
 (a) an internal kernel leak bug.
 (b) the user passed more than 1024 frags.
 
+TX Interface
+============
+
+
+Example
+-------
+
+./tools/testing/selftests/drivers/net/hw/ncdevmem:do_client shows an example of
+setting up the TX path of this API.
+
+
+NIC Setup
+---------
+
+The user must bind a TX dmabuf to a given NIC using the netlink API::
+
+        struct netdev_bind_tx_req *req = NULL;
+        struct netdev_bind_tx_rsp *rsp = NULL;
+        struct ynl_error yerr;
+
+        *ys = ynl_sock_create(&ynl_netdev_family, &yerr);
+
+        req = netdev_bind_tx_req_alloc();
+        netdev_bind_tx_req_set_ifindex(req, ifindex);
+        netdev_bind_tx_req_set_fd(req, dmabuf_fd);
+
+        rsp = netdev_bind_tx(*ys, req);
+
+        tx_dmabuf_id = rsp->id;
+
+
+The netlink API returns a dmabuf_id: a unique ID that refers to this dmabuf
+that has been bound.
+
+The user can unbind the dmabuf from the netdevice by closing the netlink socket
+that established the binding. We do this so that the binding is automatically
+unbound even if the userspace process crashes.
+
+Note that any reasonably well-behaved dmabuf from any exporter should work with
+devmem TCP, even if the dmabuf is not actually backed by devmem. An example of
+this is udmabuf, which wraps user memory (non-devmem) in a dmabuf.
+
+Socket Setup
+------------
+
+The user application must use MSG_ZEROCOPY flag when sending devmem TCP. Devmem
+cannot be copied by the kernel, so the semantics of the devmem TX are similar
+to the semantics of MSG_ZEROCOPY::
+
+	setsockopt(socket_fd, SOL_SOCKET, SO_ZEROCOPY, &opt, sizeof(opt));
+
+It is also recommended that the user binds the TX socket to the same interface
+the dma-buf has been bound to via SO_BINDTODEVICE::
+
+	setsockopt(socket_fd, SOL_SOCKET, SO_BINDTODEVICE, ifname, strlen(ifname) + 1);
+
+
+Sending data
+------------
+
+Devmem data is sent using the SCM_DEVMEM_DMABUF cmsg.
+
+The user should create a msghdr where,
+
+* iov_base is set to the offset into the dmabuf to start sending from
+* iov_len is set to the number of bytes to be sent from the dmabuf
+
+The user passes the dma-buf id to send from via the dmabuf_tx_cmsg.dmabuf_id.
+
+The example below sends 1024 bytes from offset 100 into the dmabuf, and 2048
+from offset 2000 into the dmabuf. The dmabuf to send from is tx_dmabuf_id::
+
+       char ctrl_data[CMSG_SPACE(sizeof(struct dmabuf_tx_cmsg))];
+       struct dmabuf_tx_cmsg ddmabuf;
+       struct msghdr msg = {};
+       struct cmsghdr *cmsg;
+       struct iovec iov[2];
+
+       iov[0].iov_base = (void*)100;
+       iov[0].iov_len = 1024;
+       iov[1].iov_base = (void*)2000;
+       iov[1].iov_len = 2048;
+
+       msg.msg_iov = iov;
+       msg.msg_iovlen = 2;
+
+       msg.msg_control = ctrl_data;
+       msg.msg_controllen = sizeof(ctrl_data);
+
+       cmsg = CMSG_FIRSTHDR(&msg);
+       cmsg->cmsg_level = SOL_SOCKET;
+       cmsg->cmsg_type = SCM_DEVMEM_DMABUF;
+       cmsg->cmsg_len = CMSG_LEN(sizeof(struct dmabuf_tx_cmsg));
+
+       ddmabuf.dmabuf_id = tx_dmabuf_id;
+
+       *((struct dmabuf_tx_cmsg *)CMSG_DATA(cmsg)) = ddmabuf;
+
+       sendmsg(socket_fd, &msg, MSG_ZEROCOPY);
+
+
+Reusing TX dmabufs
+------------------
+
+Similar to MSG_ZEROCOPY with regular memory, the user should not modify the
+contents of the dma-buf while a send operation is in progress. This is because
+the kernel does not keep a copy of the dmabuf contents. Instead, the kernel
+will pin and send data from the buffer available to the userspace.
+
+Just as in MSG_ZEROCOPY, the kernel notifies the userspace of send completions
+using MSG_ERRQUEUE::
+
+        int64_t tstop = gettimeofday_ms() + waittime_ms;
+        char control[CMSG_SPACE(100)] = {};
+        struct sock_extended_err *serr;
+        struct msghdr msg = {};
+        struct cmsghdr *cm;
+        int retries = 10;
+        __u32 hi, lo;
+
+        msg.msg_control = control;
+        msg.msg_controllen = sizeof(control);
+
+        while (gettimeofday_ms() < tstop) {
+                if (!do_poll(fd)) continue;
+
+                ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+
+                for (cm = CMSG_FIRSTHDR(&msg); cm; cm = CMSG_NXTHDR(&msg, cm)) {
+                        serr = (void *)CMSG_DATA(cm);
+
+                        hi = serr->ee_data;
+                        lo = serr->ee_info;
+
+                        fprintf(stdout, "tx complete [%d,%d]\n", lo, hi);
+                }
+        }
+
+After the associated sendmsg has been completed, the dmabuf can be reused by
+the userspace.
+
+
 Implementation & Caveats
 ========================
 
diff --git linux-libre-6.15-gnu/Documentation/networking/index.rst linux-libre-6.16-gnu/Documentation/networking/index.rst
index c64133d309bf..ac90b82f3ce9 100644
--- linux-libre-6.15-gnu/Documentation/networking/index.rst
+++ linux-libre-6.16-gnu/Documentation/networking/index.rst
@@ -48,7 +48,6 @@ Contents:
    ax25
    bonding
    cdc_mbim
-   dccp
    dctcp
    devmem
    dns_resolver
diff --git linux-libre-6.15-gnu/Documentation/networking/ip-sysctl.rst linux-libre-6.16-gnu/Documentation/networking/ip-sysctl.rst
index 5c63ab928b97..0f1251cce314 100644
--- linux-libre-6.15-gnu/Documentation/networking/ip-sysctl.rst
+++ linux-libre-6.16-gnu/Documentation/networking/ip-sysctl.rst
@@ -37,8 +37,8 @@ ip_no_pmtu_disc - INTEGER
 	Mode 3 is a hardened pmtu discover mode. The kernel will only
 	accept fragmentation-needed errors if the underlying protocol
 	can verify them besides a plain socket lookup. Current
-	protocols for which pmtu events will be honored are TCP, SCTP
-	and DCCP as they verify e.g. the sequence number or the
+	protocols for which pmtu events will be honored are TCP and
+	SCTP as they verify e.g. the sequence number or the
 	association. This mode should not be enabled globally but is
 	only intended to secure e.g. name servers in namespaces where
 	TCP path mtu must still work but path MTU information of other
@@ -735,7 +735,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 131072 and 6MB, depending on RAM size.
+	Default: between 131072 and 32MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -1099,7 +1099,7 @@ tcp_limit_output_bytes - INTEGER
 	limits the number of bytes on qdisc or device to reduce artificial
 	RTT/cwnd and reduce bufferbloat.
 
-	Default: 1048576 (16 * 65536)
+	Default: 4194304 (4 MB)
 
 tcp_challenge_ack_limit - INTEGER
 	Limits number of Challenge ACK sent per second, as recommended
diff --git linux-libre-6.15-gnu/Documentation/networking/net_cachelines/net_device.rst linux-libre-6.16-gnu/Documentation/networking/net_cachelines/net_device.rst
index 6327e689e8a8..c69cc89c958e 100644
--- linux-libre-6.15-gnu/Documentation/networking/net_cachelines/net_device.rst
+++ linux-libre-6.16-gnu/Documentation/networking/net_cachelines/net_device.rst
@@ -10,6 +10,7 @@ Type                                Name                        fastpath_tx_acce
 =================================== =========================== =================== =================== ===================================================================================
 unsigned_long:32                    priv_flags                  read_mostly                             __dev_queue_xmit(tx)
 unsigned_long:1                     lltx                        read_mostly                             HARD_TX_LOCK,HARD_TX_TRYLOCK,HARD_TX_UNLOCK(tx)
+unsigned long:1                     netmem_tx:1;                read_mostly
 char                                name[16]
 struct netdev_name_node*            name_node
 struct dev_ifalias*                 ifalias
@@ -131,7 +132,7 @@ struct ref_tracker_dir              refcnt_tracker
 struct list_head                    link_watch_list
 enum:8                              reg_state
 bool                                dismantle
-enum:16                             rtnl_link_state
+bool                                rtnl_link_initilizing
 bool                                needs_free_netdev
 void*priv_destructor                struct net_device
 struct netpoll_info*                npinfo                                          read_mostly         napi_poll/napi_poll_lock
diff --git linux-libre-6.15-gnu/Documentation/networking/net_cachelines/snmp.rst linux-libre-6.16-gnu/Documentation/networking/net_cachelines/snmp.rst
index bc96efc92cf5..bd44b3eebbef 100644
--- linux-libre-6.15-gnu/Documentation/networking/net_cachelines/snmp.rst
+++ linux-libre-6.16-gnu/Documentation/networking/net_cachelines/snmp.rst
@@ -37,6 +37,8 @@ unsigned_long  LINUX_MIB_TIMEWAITKILLED
 unsigned_long  LINUX_MIB_PAWSACTIVEREJECTED
 unsigned_long  LINUX_MIB_PAWSESTABREJECTED
 unsigned_long  LINUX_MIB_TSECR_REJECTED
+unsigned_long  LINUX_MIB_PAWS_OLD_ACK
+unsigned_long  LINUX_MIB_PAWS_TW_REJECTED
 unsigned_long  LINUX_MIB_DELAYEDACKLOST
 unsigned_long  LINUX_MIB_LISTENOVERFLOWS
 unsigned_long  LINUX_MIB_LISTENDROPS
diff --git linux-libre-6.15-gnu/Documentation/networking/netdev-features.rst linux-libre-6.16-gnu/Documentation/networking/netdev-features.rst
index 5014f7cc1398..02bd7536fc0c 100644
--- linux-libre-6.15-gnu/Documentation/networking/netdev-features.rst
+++ linux-libre-6.16-gnu/Documentation/networking/netdev-features.rst
@@ -188,3 +188,8 @@ Redundancy) frames from one port to another in hardware.
 This should be set for devices which duplicate outgoing HSR (High-availability
 Seamless Redundancy) or PRP (Parallel Redundancy Protocol) tags automatically
 frames in hardware.
+
+* netmem-tx
+
+This should be set for devices which support netmem TX. See
+Documentation/networking/netmem.rst
diff --git linux-libre-6.15-gnu/Documentation/networking/netdevices.rst linux-libre-6.16-gnu/Documentation/networking/netdevices.rst
index eab601ab2db0..7ebb6c36482d 100644
--- linux-libre-6.15-gnu/Documentation/networking/netdevices.rst
+++ linux-libre-6.16-gnu/Documentation/networking/netdevices.rst
@@ -8,7 +8,7 @@ Network Devices, the Kernel, and You!
 Introduction
 ============
 The following is a random collection of documentation regarding
-network devices.
+network devices. It is intended for driver developers.
 
 struct net_device lifetime rules
 ================================
@@ -314,13 +314,8 @@ napi->poll:
 		 softirq
 		 will be called with interrupts disabled by netconsole.
 
-struct netdev_queue_mgmt_ops synchronization rules
-==================================================
-
-All queue management ndo callbacks are holding netdev instance lock.
-
-RTNL and netdev instance lock
-=============================
+netdev instance lock
+====================
 
 Historically, all networking control operations were protected by a single
 global lock known as ``rtnl_lock``. There is an ongoing effort to replace this
@@ -328,10 +323,13 @@ global lock with separate locks for each network namespace. Additionally,
 properties of individual netdev are increasingly protected by per-netdev locks.
 
 For device drivers that implement shaping or queue management APIs, all control
-operations will be performed under the netdev instance lock. Currently, this
-instance lock is acquired within the context of ``rtnl_lock``. The drivers
-can also explicitly request instance lock to be acquired via
-``request_ops_lock``. In the future, there will be an option for individual
+operations will be performed under the netdev instance lock.
+Drivers can also explicitly request instance lock to be held during ops
+by setting ``request_ops_lock`` to true. Code comments and docs refer
+to drivers which have ops called under the instance lock as "ops locked".
+See also the documentation of the ``lock`` member of struct net_device.
+
+In the future, there will be an option for individual
 drivers to opt out of using ``rtnl_lock`` and instead perform their control
 operations directly under the netdev instance lock.
 
@@ -344,18 +342,59 @@ functions handle acquiring the instance lock themselves, while the
 ``netif_xxx`` functions assume that the driver has already acquired
 the instance lock.
 
+struct net_device_ops
+---------------------
+
+``ndos`` are called without holding the instance lock for most drivers.
+
+"Ops locked" drivers will have most of the ``ndos`` invoked under
+the instance lock.
+
+struct ethtool_ops
+------------------
+
+Similarly to ``ndos`` the instance lock is only held for select drivers.
+For "ops locked" drivers all ethtool ops without exceptions should
+be called under the instance lock.
+
+struct netdev_stat_ops
+----------------------
+
+"qstat" ops are invoked under the instance lock for "ops locked" drivers,
+and under rtnl_lock for all other drivers.
+
+struct net_shaper_ops
+---------------------
+
+All net shaper callbacks are invoked while holding the netdev instance
+lock. ``rtnl_lock`` may or may not be held.
+
+Note that supporting net shapers automatically enables "ops locking".
+
+struct netdev_queue_mgmt_ops
+----------------------------
+
+All queue management callbacks are invoked while holding the netdev instance
+lock. ``rtnl_lock`` may or may not be held.
+
+Note that supporting struct netdev_queue_mgmt_ops automatically enables
+"ops locking".
+
 Notifiers and netdev instance lock
-==================================
+----------------------------------
 
 For device drivers that implement shaping or queue management APIs,
 some of the notifiers (``enum netdev_cmd``) are running under the netdev
 instance lock.
 
+The following netdev notifiers are always run under the instance lock:
+* ``NETDEV_XDP_FEAT_CHANGE``
+
 For devices with locked ops, currently only the following notifiers are
 running under the lock:
+* ``NETDEV_CHANGE``
 * ``NETDEV_REGISTER``
 * ``NETDEV_UP``
-* ``NETDEV_CHANGE``
 
 The following notifiers are running without the lock:
 * ``NETDEV_UNREGISTER``
diff --git linux-libre-6.15-gnu/Documentation/networking/netmem.rst linux-libre-6.16-gnu/Documentation/networking/netmem.rst
index 7de21ddb5412..b63aded46337 100644
--- linux-libre-6.15-gnu/Documentation/networking/netmem.rst
+++ linux-libre-6.16-gnu/Documentation/networking/netmem.rst
@@ -19,8 +19,8 @@ Benefits of Netmem :
 * Simplified Development: Drivers interact with a consistent API,
   regardless of the underlying memory implementation.
 
-Driver Requirements
-===================
+Driver RX Requirements
+======================
 
 1. The driver must support page_pool.
 
@@ -77,3 +77,22 @@ Driver Requirements
    that purpose, but be mindful that some netmem types might have longer
    circulation times, such as when userspace holds a reference in zerocopy
    scenarios.
+
+Driver TX Requirements
+======================
+
+1. The Driver must not pass the netmem dma_addr to any of the dma-mapping APIs
+   directly. This is because netmem dma_addrs may come from a source like
+   dma-buf that is not compatible with the dma-mapping APIs.
+
+   Helpers like netmem_dma_unmap_page_attrs() & netmem_dma_unmap_addr_set()
+   should be used in lieu of dma_unmap_page[_attrs](), dma_unmap_addr_set().
+   The netmem variants will handle netmem dma_addrs correctly regardless of the
+   source, delegating to the dma-mapping APIs when appropriate.
+
+   Not all dma-mapping APIs have netmem equivalents at the moment. If your
+   driver relies on a missing netmem API, feel free to add and propose to
+   netdev@, or reach out to the maintainers and/or almasrymina@google.com for
+   help adding the netmem API.
+
+2. Driver should declare support by setting `netdev->netmem_tx = true`
diff --git linux-libre-6.15-gnu/Documentation/networking/rds.rst linux-libre-6.16-gnu/Documentation/networking/rds.rst
index 498395f5fbcb..41b0a6182fe4 100644
--- linux-libre-6.15-gnu/Documentation/networking/rds.rst
+++ linux-libre-6.16-gnu/Documentation/networking/rds.rst
@@ -265,7 +265,7 @@ RDS Protocol
 
       The bitmaps are allocated as connections are brought up.  This
       avoids allocation in the interrupt handling path which queues
-      sages on sockets.  The dense bitmaps let transports send the
+      messages on sockets.  The dense bitmaps let transports send the
       entire bitmap on any bitmap change reasonably efficiently.  This
       is much easier to implement than some finer-grained
       communication of per-port congestion.  The sender does a very
@@ -373,7 +373,7 @@ The recv path
     - validate header checksum
     - copy header to rds_ib_incoming struct if start of a new datagram
     - add to ibinc's fraglist
-    - if competed datagram:
+    - if completed datagram:
 	 - update cong map if datagram was cong update
 	 - call rds_recv_incoming() otherwise
 	 - note if ack is required
@@ -415,7 +415,7 @@ Multipath RDS (mprds)
   I/O workqs and reconnect threads are driven from the rds_conn_path.
   Transports such as TCP that are multipath capable may then set up a
   TCP socket per rds_conn_path, and this is managed by the transport via
-  the transport privatee cp_transport_data pointer.
+  the transport private cp_transport_data pointer.
 
   Transports announce themselves as multipath capable by setting the
   t_mp_capable bit during registration with the rds core module. When the
@@ -430,7 +430,7 @@ Multipath RDS (mprds)
   This is done by sending out a control packet exchange before the
   first data packet. The control packet exchange must have completed
   prior to outgoing hash completion in rds_sendmsg() when the transport
-  is mutlipath capable.
+  is multipath capable.
 
   The control packet is an RDS ping packet (i.e., packet to rds dest
   port 0) with the ping packet having a rds extension header option  of
diff --git linux-libre-6.15-gnu/Documentation/networking/rxrpc.rst linux-libre-6.16-gnu/Documentation/networking/rxrpc.rst
index e807e18ba32a..d63e3e27dd06 100644
--- linux-libre-6.15-gnu/Documentation/networking/rxrpc.rst
+++ linux-libre-6.16-gnu/Documentation/networking/rxrpc.rst
@@ -1062,30 +1062,6 @@ The kernel interface functions are as follows:
      first function to change.  Note that this must be called in TASK_RUNNING
      state.
 
- (#) Get remote client epoch::
-
-	u32 rxrpc_kernel_get_epoch(struct socket *sock,
-				   struct rxrpc_call *call)
-
-     This allows the epoch that's contained in packets of an incoming client
-     call to be queried.  This value is returned.  The function always
-     successful if the call is still in progress.  It shouldn't be called once
-     the call has expired.  Note that calling this on a local client call only
-     returns the local epoch.
-
-     This value can be used to determine if the remote client has been
-     restarted as it shouldn't change otherwise.
-
- (#) Set the maximum lifespan on a call::
-
-	void rxrpc_kernel_set_max_life(struct socket *sock,
-				       struct rxrpc_call *call,
-				       unsigned long hard_timeout)
-
-     This sets the maximum lifespan on a call to hard_timeout (which is in
-     jiffies).  In the event of the timeout occurring, the call will be
-     aborted and -ETIME or -ETIMEDOUT will be returned.
-
  (#) Apply the RXRPC_MIN_SECURITY_LEVEL sockopt to a socket from within in the
      kernel::
 
@@ -1172,3 +1148,18 @@ adjusted through sysctls in /proc/net/rxrpc/:
      header plus exactly 1412 bytes of data.  The terminal packet must contain
      a four byte header plus any amount of data.  In any event, a jumbo packet
      may not exceed rxrpc_rx_mtu in size.
+
+
+API Function Reference
+======================
+
+.. kernel-doc:: net/rxrpc/af_rxrpc.c
+.. kernel-doc:: net/rxrpc/call_object.c
+.. kernel-doc:: net/rxrpc/key.c
+.. kernel-doc:: net/rxrpc/oob.c
+.. kernel-doc:: net/rxrpc/peer_object.c
+.. kernel-doc:: net/rxrpc/recvmsg.c
+.. kernel-doc:: net/rxrpc/rxgk.c
+.. kernel-doc:: net/rxrpc/rxkad.c
+.. kernel-doc:: net/rxrpc/sendmsg.c
+.. kernel-doc:: net/rxrpc/server_key.c
diff --git linux-libre-6.15-gnu/Documentation/networking/tls.rst linux-libre-6.16-gnu/Documentation/networking/tls.rst
index c7904a1bc167..36cc7afc2527 100644
--- linux-libre-6.15-gnu/Documentation/networking/tls.rst
+++ linux-libre-6.16-gnu/Documentation/networking/tls.rst
@@ -16,11 +16,13 @@ User interface
 Creating a TLS connection
 -------------------------
 
-First create a new TCP socket and set the TLS ULP.
+First create a new TCP socket and once the connection is established set the
+TLS ULP.
 
 .. code-block:: c
 
   sock = socket(AF_INET, SOCK_STREAM, 0);
+  connect(sock, addr, addrlen);
   setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls"));
 
 Setting the TLS ULP allows us to set/get TLS socket options. Currently
diff --git linux-libre-6.15-gnu/Documentation/networking/tproxy.rst linux-libre-6.16-gnu/Documentation/networking/tproxy.rst
index 7f7c1ff6f159..75e4990cc3db 100644
--- linux-libre-6.15-gnu/Documentation/networking/tproxy.rst
+++ linux-libre-6.16-gnu/Documentation/networking/tproxy.rst
@@ -69,9 +69,9 @@ add rules like this to the iptables ruleset above::
     # iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY \
       --tproxy-mark 0x1/0x1 --on-port 50080
 
-Or the following rule to nft:
+Or the following rule to nft::
 
-# nft add rule filter divert tcp dport 80 tproxy to :50080 meta mark set 1 accept
+    # nft add rule filter divert tcp dport 80 tproxy to :50080 meta mark set 1 accept
 
 Note that for this to work you'll have to modify the proxy to enable (SOL_IP,
 IP_TRANSPARENT) for the listening socket.
diff --git linux-libre-6.15-gnu/Documentation/networking/xfrm_device.rst linux-libre-6.16-gnu/Documentation/networking/xfrm_device.rst
index 7f24c09f2694..122204da0fff 100644
--- linux-libre-6.15-gnu/Documentation/networking/xfrm_device.rst
+++ linux-libre-6.16-gnu/Documentation/networking/xfrm_device.rst
@@ -65,9 +65,13 @@ Callbacks to implement
   /* from include/linux/netdevice.h */
   struct xfrmdev_ops {
         /* Crypto and Packet offload callbacks */
-	int	(*xdo_dev_state_add) (struct xfrm_state *x, struct netlink_ext_ack *extack);
-	void	(*xdo_dev_state_delete) (struct xfrm_state *x);
-	void	(*xdo_dev_state_free) (struct xfrm_state *x);
+	int	(*xdo_dev_state_add)(struct net_device *dev,
+                                     struct xfrm_state *x,
+                                     struct netlink_ext_ack *extack);
+	void	(*xdo_dev_state_delete)(struct net_device *dev,
+                                        struct xfrm_state *x);
+	void	(*xdo_dev_state_free)(struct net_device *dev,
+                                      struct xfrm_state *x);
 	bool	(*xdo_dev_offload_ok) (struct sk_buff *skb,
 				       struct xfrm_state *x);
 	void    (*xdo_dev_state_advance_esn) (struct xfrm_state *x);
diff --git linux-libre-6.15-gnu/Documentation/power/energy-model.rst linux-libre-6.16-gnu/Documentation/power/energy-model.rst
index ada4938c37e5..cbdf7520aaa6 100644
--- linux-libre-6.15-gnu/Documentation/power/energy-model.rst
+++ linux-libre-6.16-gnu/Documentation/power/energy-model.rst
@@ -230,7 +230,7 @@ Drivers must provide a pointer to the allocated and initialized new EM
 and will be visible to other sub-systems in the kernel (thermal, powercap).
 The main design goal for this API is to be fast and avoid extra calculations
 or memory allocations at runtime. When pre-computed EMs are available in the
-device driver, than it should be possible to simply re-use them with low
+device driver, then it should be possible to simply reuse them with low
 performance overhead.
 
 In order to free the EM, provided earlier by the driver (e.g. when the module
@@ -381,17 +381,17 @@ up periodically to check the temperature and modify the EM data::
   26		rcu_read_unlock();
   27
   28		/* Calculate 'cost' values for EAS */
-  29		ret = em_dev_compute_costs(dev, table, pd->nr_perf_states);
+  29		ret = em_dev_compute_costs(dev, new_table, pd->nr_perf_states);
   30		if (ret) {
   31			dev_warn(dev, "EM: compute costs failed %d\n", ret);
-  32			em_free_table(em_table);
+  32			em_table_free(em_table);
   33			return;
   34		}
   35
   36		ret = em_dev_update_perf_domain(dev, em_table);
   37		if (ret) {
   38			dev_warn(dev, "EM: update failed %d\n", ret);
-  39			em_free_table(em_table);
+  39			em_table_free(em_table);
   40			return;
   41		}
   42
diff --git linux-libre-6.15-gnu/Documentation/process/1.Intro.rst linux-libre-6.16-gnu/Documentation/process/1.Intro.rst
index c3d0270bbfb3..25ca49f7ae4d 100644
--- linux-libre-6.15-gnu/Documentation/process/1.Intro.rst
+++ linux-libre-6.16-gnu/Documentation/process/1.Intro.rst
@@ -251,12 +251,12 @@ there is no prospect of a migration to version 3 of the GPL in the
 foreseeable future.
 
 It is imperative that all code contributed to the kernel be legitimately
-free software.  For that reason, code from anonymous (or pseudonymous)
-contributors will not be accepted.  All contributors are required to "sign
-off" on their code, stating that the code can be distributed with the
-kernel under the GPL.  Code which has not been licensed as free software by
-its owner, or which risks creating copyright-related problems for the
-kernel (such as code which derives from reverse-engineering efforts lacking
+free software.  For that reason, code from contributors without a known
+identity or anonymous contributors will not be accepted. All contributors are
+required to "sign off" on their code, stating that the code can be distributed
+with the kernel under the GPL.  Code which has not been licensed as free
+software by its owner, or which risks creating copyright-related problems for
+the kernel (such as code which derives from reverse-engineering efforts lacking
 proper safeguards) cannot be contributed.
 
 Questions about copyright-related issues are common on Linux development
diff --git linux-libre-6.15-gnu/Documentation/process/adding-syscalls.rst linux-libre-6.16-gnu/Documentation/process/adding-syscalls.rst
index 906c47f1a9e5..fc0b0bbcd34d 100644
--- linux-libre-6.15-gnu/Documentation/process/adding-syscalls.rst
+++ linux-libre-6.16-gnu/Documentation/process/adding-syscalls.rst
@@ -248,6 +248,52 @@ To summarize, you need a commit that includes:
  - fallback stub in ``kernel/sys_ni.c``
 
 
+.. _syscall_generic_6_11:
+
+Since 6.11
+~~~~~~~~~~
+
+Starting with kernel version 6.11, general system call implementation for the
+following architectures no longer requires modifications to
+``include/uapi/asm-generic/unistd.h``:
+
+ - arc
+ - arm64
+ - csky
+ - hexagon
+ - loongarch
+ - nios2
+ - openrisc
+ - riscv
+
+Instead, you need to update ``scripts/syscall.tbl`` and, if applicable, adjust
+``arch/*/kernel/Makefile.syscalls``.
+
+As ``scripts/syscall.tbl`` serves as a common syscall table across multiple
+architectures, a new entry is required in this table::
+
+    468   common   xyzzy     sys_xyzzy
+
+Note that adding an entry to ``scripts/syscall.tbl`` with the "common" ABI
+also affects all architectures that share this table. For more limited or
+architecture-specific changes, consider using an architecture-specific ABI or
+defining a new one.
+
+If a new ABI, say ``xyz``, is introduced, the corresponding updates should be
+made to ``arch/*/kernel/Makefile.syscalls`` as well::
+
+    syscall_abis_{32,64} += xyz (...)
+
+To summarize, you need a commit that includes:
+
+ - ``CONFIG`` option for the new function, normally in ``init/Kconfig``
+ - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point
+ - corresponding prototype in ``include/linux/syscalls.h``
+ - new entry in ``scripts/syscall.tbl``
+ - (if needed) Makefile updates in ``arch/*/kernel/Makefile.syscalls``
+ - fallback stub in ``kernel/sys_ni.c``
+
+
 x86 System Call Implementation
 ------------------------------
 
@@ -353,6 +399,41 @@ To summarize, you need:
    ``include/uapi/asm-generic/unistd.h``
 
 
+Since 6.11
+~~~~~~~~~~
+
+This applies to all the architectures listed in :ref:`Since 6.11<syscall_generic_6_11>`
+under "Generic System Call Implementation", except arm64. See
+:ref:`Compatibility System Calls (arm64)<compat_arm64>` for more information.
+
+You need to extend the entry in ``scripts/syscall.tbl`` with an extra column
+to indicate that a 32-bit userspace program running on a 64-bit kernel should
+hit the compat entry point::
+
+    468   common     xyzzy     sys_xyzzy    compat_sys_xyzzy
+
+To summarize, you need:
+
+ - ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point
+ - corresponding prototype in ``include/linux/compat.h``
+ - modification of the entry in ``scripts/syscall.tbl`` to include an extra
+   "compat" column
+ - (if needed) 32-bit mapping struct in ``include/linux/compat.h``
+
+
+.. _compat_arm64:
+
+Compatibility System Calls (arm64)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+On arm64, there is a dedicated syscall table for compatibility system calls
+targeting 32-bit (AArch32) userspace: ``arch/arm64/tools/syscall_32.tbl``.
+You need to add an additional line to this table specifying the compat
+entry point::
+
+    468   common     xyzzy     sys_xyzzy    compat_sys_xyzzy
+
+
 Compatibility System Calls (x86)
 --------------------------------
 
@@ -575,3 +656,6 @@ References and Sources
  - Recommendation from Linus Torvalds that x32 system calls should prefer
    compatibility with 64-bit versions rather than 32-bit versions:
    https://lore.kernel.org/r/CA+55aFxfmwfB7jbbrXxa=K7VBYPfAvmu3XOkGrLbB1UFjX1+Ew@mail.gmail.com
+ - Patch series revising system call table infrastructure to use
+   scripts/syscall.tbl across multiple architectures:
+   https://lore.kernel.org/lkml/20240704143611.2979589-1-arnd@kernel.org
diff --git linux-libre-6.15-gnu/Documentation/process/changes.rst linux-libre-6.16-gnu/Documentation/process/changes.rst
index d564362773b5..b14bd5b7cbc9 100644
--- linux-libre-6.15-gnu/Documentation/process/changes.rst
+++ linux-libre-6.16-gnu/Documentation/process/changes.rst
@@ -29,13 +29,13 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
-GNU C                  5.1              gcc --version
+GNU C                  8.1              gcc --version
 Clang/LLVM (optional)  13.0.1           clang --version
 Rust (optional)        1.78.0           rustc --version
 bindgen (optional)     0.65.1           bindgen --version
 GNU make               4.0              make --version
 bash                   4.2              bash --version
-binutils               2.25             ld -v
+binutils               2.30             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
 pahole                 1.16             pahole --version
@@ -116,7 +116,7 @@ Bash 4.2 or newer is needed.
 Binutils
 --------
 
-Binutils 2.25 or newer is needed to build the kernel.
+Binutils 2.30 or newer is needed to build the kernel.
 
 pkg-config
 ----------
diff --git linux-libre-6.15-gnu/Documentation/process/debugging/driver_development_debugging_guide.rst linux-libre-6.16-gnu/Documentation/process/debugging/driver_development_debugging_guide.rst
index 46becda8764b..aca08f457793 100644
--- linux-libre-6.15-gnu/Documentation/process/debugging/driver_development_debugging_guide.rst
+++ linux-libre-6.16-gnu/Documentation/process/debugging/driver_development_debugging_guide.rst
@@ -155,7 +155,7 @@ The general idea is:
     ``my_variable``
 
 - Clean up the directory when removing the device
-  (``debugfs_remove_recursive(parent);``)
+  (``debugfs_remove(parent);``)
 
 For the full documentation see :doc:`/filesystems/debugfs`.
 
diff --git linux-libre-6.15-gnu/Documentation/process/debugging/gdb-kernel-debugging.rst linux-libre-6.16-gnu/Documentation/process/debugging/gdb-kernel-debugging.rst
index 895285c037c7..9475c759c722 100644
--- linux-libre-6.15-gnu/Documentation/process/debugging/gdb-kernel-debugging.rst
+++ linux-libre-6.16-gnu/Documentation/process/debugging/gdb-kernel-debugging.rst
@@ -127,35 +127,31 @@ Examples of using the Linux-provided gdb helpers
 
 - Make use of the per-cpu function for the current or a specified CPU::
 
-    (gdb) p $lx_per_cpu("runqueues").nr_running
+    (gdb) p $lx_per_cpu(runqueues).nr_running
     $3 = 1
-    (gdb) p $lx_per_cpu("runqueues", 2).nr_running
+    (gdb) p $lx_per_cpu(runqueues, 2).nr_running
     $4 = 0
 
 - Dig into hrtimers using the container_of helper::
 
-    (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
-    (gdb) p *$container_of($next, "struct hrtimer", "node")
+    (gdb) set $leftmost = $lx_per_cpu(hrtimer_bases).clock_base[0].active.rb_root.rb_leftmost
+    (gdb) p *$container_of($leftmost, "struct hrtimer", "node")
     $5 = {
       node = {
         node = {
-          __rb_parent_color = 18446612133355256072,
-          rb_right = 0x0 <irq_stack_union>,
-          rb_left = 0x0 <irq_stack_union>
+          __rb_parent_color = 18446612686384860673,
+          rb_right = 0xffff888231da8b00,
+          rb_left = 0x0
         },
-        expires = {
-          tv64 = 1835268000000
-        }
+        expires = 1228461000000
       },
-      _softexpires = {
-        tv64 = 1835268000000
-      },
-      function = 0xffffffff81078232 <tick_sched_timer>,
-      base = 0xffff88003fd0d6f0,
-      state = 1,
-      start_pid = 0,
-      start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
-      start_comm = "swapper/2\000\000\000\000\000\000"
+      _softexpires = 1228461000000,
+      function = 0xffffffff8137ab20 <tick_nohz_handler>,
+      base = 0xffff888231d9b4c0,
+      state = 1 '\001',
+      is_rel = 0 '\000',
+      is_soft = 0 '\000',
+      is_hard = 1 '\001'
     }
 
 
diff --git linux-libre-6.15-gnu/Documentation/process/embargoed-hardware-issues.rst linux-libre-6.16-gnu/Documentation/process/embargoed-hardware-issues.rst
index 0e19d2f0d6bb..34e00848e0da 100644
--- linux-libre-6.15-gnu/Documentation/process/embargoed-hardware-issues.rst
+++ linux-libre-6.16-gnu/Documentation/process/embargoed-hardware-issues.rst
@@ -290,7 +290,7 @@ an involved disclosed party. The current ambassadors list:
   AMD		Tom Lendacky <thomas.lendacky@amd.com>
   Ampere	Darren Hart <darren@os.amperecomputing.com>
   ARM		Catalin Marinas <catalin.marinas@arm.com>
-  IBM Power	Michael Ellerman <ellerman@au.ibm.com>
+  IBM Power	Madhavan Srinivasan <maddy@linux.ibm.com>
   IBM Z		Christian Borntraeger <borntraeger@de.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
   Qualcomm	Trilok Soni <quic_tsoni@quicinc.com>
diff --git linux-libre-6.15-gnu/Documentation/process/maintainer-netdev.rst linux-libre-6.16-gnu/Documentation/process/maintainer-netdev.rst
index 1ac62dc3a66f..e1755610b4bc 100644
--- linux-libre-6.15-gnu/Documentation/process/maintainer-netdev.rst
+++ linux-libre-6.16-gnu/Documentation/process/maintainer-netdev.rst
@@ -312,7 +312,7 @@ Posting as one thread is discouraged because it confuses patchwork
 (as of patchwork 2.2.2).
 
 Co-posting selftests
---------------------
+~~~~~~~~~~~~~~~~~~~~
 
 Selftests should be part of the same series as the code changes.
 Specifically for fixes both code change and related test should go into
diff --git linux-libre-6.15-gnu/Documentation/rust/coding-guidelines.rst linux-libre-6.16-gnu/Documentation/rust/coding-guidelines.rst
index 27f2a7bb5a4a..6ff9e754755d 100644
--- linux-libre-6.15-gnu/Documentation/rust/coding-guidelines.rst
+++ linux-libre-6.16-gnu/Documentation/rust/coding-guidelines.rst
@@ -85,6 +85,18 @@ written after the documentation, e.g.:
 	    // ...
 	}
 
+This applies to both public and private items. This increases consistency with
+public items, allows changes to visibility with less changes involved and will
+allow us to potentially generate the documentation for private items as well.
+In other words, if documentation is written for a private item, then ``///``
+should still be used. For instance:
+
+.. code-block:: rust
+
+	/// My private function.
+	// TODO: ...
+	fn f() {}
+
 One special kind of comments are the ``// SAFETY:`` comments. These must appear
 before every ``unsafe`` block, and they explain why the code inside the block is
 correct/sound, i.e. why it cannot trigger undefined behavior in any case, e.g.:
@@ -191,6 +203,23 @@ or:
 	/// [`struct mutex`]: srctree/include/linux/mutex.h
 
 
+C FFI types
+-----------
+
+Rust kernel code refers to C types, such as ``int``, using type aliases such as
+``c_int``, which are readily available from the ``kernel`` prelude. Please do
+not use the aliases from ``core::ffi`` -- they may not map to the correct types.
+
+These aliases should generally be referred directly by their identifier, i.e.
+as a single segment path. For instance:
+
+.. code-block:: rust
+
+	fn f(p: *const c_char) -> c_int {
+	    // ...
+	}
+
+
 Naming
 ------
 
diff --git linux-libre-6.15-gnu/Documentation/rust/quick-start.rst linux-libre-6.16-gnu/Documentation/rust/quick-start.rst
index 6d2607870ba4..155f7107329a 100644
--- linux-libre-6.15-gnu/Documentation/rust/quick-start.rst
+++ linux-libre-6.16-gnu/Documentation/rust/quick-start.rst
@@ -90,15 +90,53 @@ they should generally work out of the box, e.g.::
 Ubuntu
 ******
 
-Ubuntu LTS and non-LTS (interim) releases provide recent Rust releases and thus
-they should generally work out of the box, e.g.::
+25.04
+~~~~~
+
+The latest Ubuntu releases provide recent Rust releases and thus they should
+generally work out of the box, e.g.::
+
+	apt install rustc rust-src bindgen rustfmt rust-clippy
+
+In addition, ``RUST_LIB_SRC`` needs to be set, e.g.::
+
+	RUST_LIB_SRC=/usr/src/rustc-$(rustc --version | cut -d' ' -f2)/library
+
+For convenience, ``RUST_LIB_SRC`` can be exported to the global environment.
 
-	apt install rustc-1.80 rust-1.80-src bindgen-0.65 rustfmt-1.80 rust-1.80-clippy
+
+24.04 LTS and older
+~~~~~~~~~~~~~~~~~~~
+
+Though Ubuntu 24.04 LTS and older versions still provide recent Rust
+releases, they require some additional configuration to be set, using
+the versioned packages, e.g.::
+
+	apt install rustc-1.80 rust-1.80-src bindgen-0.65 rustfmt-1.80 \
+		rust-1.80-clippy
+	ln -s /usr/lib/rust-1.80/bin/rustfmt /usr/bin/rustfmt-1.80
+	ln -s /usr/lib/rust-1.80/bin/clippy-driver /usr/bin/clippy-driver-1.80
+
+None of these packages set their tools as defaults; therefore they should be
+specified explicitly, e.g.::
+
+	make LLVM=1 RUSTC=rustc-1.80 RUSTDOC=rustdoc-1.80 RUSTFMT=rustfmt-1.80 \
+		CLIPPY_DRIVER=clippy-driver-1.80 BINDGEN=bindgen-0.65
+
+Alternatively, modify the ``PATH`` variable to place the Rust 1.80 binaries
+first and set ``bindgen`` as the default, e.g.::
+
+	PATH=/usr/lib/rust-1.80/bin:$PATH
+	update-alternatives --install /usr/bin/bindgen bindgen \
+		/usr/bin/bindgen-0.65 100
+	update-alternatives --set bindgen /usr/bin/bindgen-0.65
 
 ``RUST_LIB_SRC`` needs to be set when using the versioned packages, e.g.::
 
 	RUST_LIB_SRC=/usr/src/rustc-$(rustc-1.80 --version | cut -d' ' -f2)/library
 
+For convenience, ``RUST_LIB_SRC`` can be exported to the global environment.
+
 In addition, ``bindgen-0.65`` is available in newer releases (24.04 LTS and
 24.10), but it may not be available in older ones (20.04 LTS and 22.04 LTS),
 thus ``bindgen`` may need to be built manually (please see below).
diff --git linux-libre-6.15-gnu/Documentation/rust/testing.rst linux-libre-6.16-gnu/Documentation/rust/testing.rst
index f692494f7b74..f43cb77bcc69 100644
--- linux-libre-6.15-gnu/Documentation/rust/testing.rst
+++ linux-libre-6.16-gnu/Documentation/rust/testing.rst
@@ -133,13 +133,85 @@ please see:
 The ``#[test]`` tests
 ---------------------
 
-Additionally, there are the ``#[test]`` tests. These can be run using the
-``rusttest`` Make target::
+Additionally, there are the ``#[test]`` tests. Like for documentation tests,
+these are also fairly similar to what you would expect from userspace, and they
+are also mapped to KUnit.
+
+These tests are introduced by the ``kunit_tests`` procedural macro, which takes
+the name of the test suite as an argument.
+
+For instance, assume we want to test the function ``f`` from the documentation
+tests section. We could write, in the same file where we have our function:
+
+.. code-block:: rust
+
+	#[kunit_tests(rust_kernel_mymod)]
+	mod tests {
+	    use super::*;
+
+	    #[test]
+	    fn test_f() {
+	        assert_eq!(f(10, 20), 30);
+	    }
+	}
+
+And if we run it, the kernel log would look like::
+
+	    KTAP version 1
+	    # Subtest: rust_kernel_mymod
+	    # speed: normal
+	    1..1
+	    # test_f.speed: normal
+	    ok 1 test_f
+	ok 1 rust_kernel_mymod
+
+Like documentation tests, the ``assert!`` and ``assert_eq!`` macros are mapped
+back to KUnit and do not panic. Similarly, the
+`? <https://doc.rust-lang.org/reference/expressions/operator-expr.html#the-question-mark-operator>`_
+operator is supported, i.e. the test functions may return either nothing (i.e.
+the unit type ``()``) or ``Result`` (i.e. any ``Result<T, E>``). For instance:
+
+.. code-block:: rust
+
+	#[kunit_tests(rust_kernel_mymod)]
+	mod tests {
+	    use super::*;
+
+	    #[test]
+	    fn test_g() -> Result {
+	        let x = g()?;
+	        assert_eq!(x, 30);
+	        Ok(())
+	    }
+	}
+
+If we run the test and the call to ``g`` fails, then the kernel log would show::
+
+	    KTAP version 1
+	    # Subtest: rust_kernel_mymod
+	    # speed: normal
+	    1..1
+	    # test_g: ASSERTION FAILED at rust/kernel/lib.rs:335
+	    Expected is_test_result_ok(test_g()) to be true, but is false
+	    # test_g.speed: normal
+	    not ok 1 test_g
+	not ok 1 rust_kernel_mymod
+
+If a ``#[test]`` test could be useful as an example for the user, then please
+use a documentation test instead. Even edge cases of an API, e.g. error or
+boundary cases, can be interesting to show in examples.
+
+The ``rusttest`` host tests
+---------------------------
+
+These are userspace tests that can be built and run in the host (i.e. the one
+that performs the kernel build) using the ``rusttest`` Make target::
 
 	make LLVM=1 rusttest
 
-This requires the kernel ``.config``. It runs the ``#[test]`` tests on the host
-(currently) and thus is fairly limited in what these tests can test.
+This requires the kernel ``.config``.
+
+Currently, they are mostly used for testing the ``macros`` crate's examples.
 
 The Kselftests
 --------------
diff --git linux-libre-6.15-gnu/Documentation/scheduler/sched-ext.rst linux-libre-6.16-gnu/Documentation/scheduler/sched-ext.rst
index 0b2654e2164b..a1869c38046e 100644
--- linux-libre-6.15-gnu/Documentation/scheduler/sched-ext.rst
+++ linux-libre-6.16-gnu/Documentation/scheduler/sched-ext.rst
@@ -1,3 +1,5 @@
+.. _sched-ext:
+
 ==========================
 Extensible Scheduler Class
 ==========================
@@ -47,8 +49,8 @@ options should be enabled to use sched_ext:
 sched_ext is used only when the BPF scheduler is loaded and running.
 
 If a task explicitly sets its scheduling policy to ``SCHED_EXT``, it will be
-treated as ``SCHED_NORMAL`` and scheduled by CFS until the BPF scheduler is
-loaded.
+treated as ``SCHED_NORMAL`` and scheduled by the fair-class scheduler until the
+BPF scheduler is loaded.
 
 When the BPF scheduler is loaded and ``SCX_OPS_SWITCH_PARTIAL`` is not set
 in ``ops->flags``, all ``SCHED_NORMAL``, ``SCHED_BATCH``, ``SCHED_IDLE``, and
@@ -57,11 +59,11 @@ in ``ops->flags``, all ``SCHED_NORMAL``, ``SCHED_BATCH``, ``SCHED_IDLE``, and
 However, when the BPF scheduler is loaded and ``SCX_OPS_SWITCH_PARTIAL`` is
 set in ``ops->flags``, only tasks with the ``SCHED_EXT`` policy are scheduled
 by sched_ext, while tasks with ``SCHED_NORMAL``, ``SCHED_BATCH`` and
-``SCHED_IDLE`` policies are scheduled by CFS.
+``SCHED_IDLE`` policies are scheduled by the fair-class scheduler.
 
 Terminating the sched_ext scheduler program, triggering `SysRq-S`, or
 detection of any internal error including stalled runnable tasks aborts the
-BPF scheduler and reverts all tasks back to CFS.
+BPF scheduler and reverts all tasks back to the fair-class scheduler.
 
 .. code-block:: none
 
@@ -197,8 +199,8 @@ Dispatch Queues
 To match the impedance between the scheduler core and the BPF scheduler,
 sched_ext uses DSQs (dispatch queues) which can operate as both a FIFO and a
 priority queue. By default, there is one global FIFO (``SCX_DSQ_GLOBAL``),
-and one local dsq per CPU (``SCX_DSQ_LOCAL``). The BPF scheduler can manage
-an arbitrary number of dsq's using ``scx_bpf_create_dsq()`` and
+and one local DSQ per CPU (``SCX_DSQ_LOCAL``). The BPF scheduler can manage
+an arbitrary number of DSQs using ``scx_bpf_create_dsq()`` and
 ``scx_bpf_destroy_dsq()``.
 
 A CPU always executes a task from its local DSQ. A task is "inserted" into a
diff --git linux-libre-6.15-gnu/Documentation/scheduler/sched-stats.rst linux-libre-6.16-gnu/Documentation/scheduler/sched-stats.rst
index 08b6bc9a315c..d82e7d2b54f0 100644
--- linux-libre-6.15-gnu/Documentation/scheduler/sched-stats.rst
+++ linux-libre-6.16-gnu/Documentation/scheduler/sched-stats.rst
@@ -135,7 +135,7 @@ of idleness (busy, idle and newly idle):
         cpu was idle but no busier group was found
 
     23) # of times in this domain sched_balance_rq() was called when the
-        was just becoming idle
+        cpu was just becoming idle
     24) # of times in this domain sched_balance_rq() checked but found the
         load did not require balancing when the cpu was just becoming idle
     25) # of times in this domain sched_balance_rq() tried to move one or more
diff --git linux-libre-6.15-gnu/Documentation/scsi/scsi_mid_low_api.rst linux-libre-6.16-gnu/Documentation/scsi/scsi_mid_low_api.rst
index 3cd6dce98e74..3ac4c7fafb55 100644
--- linux-libre-6.15-gnu/Documentation/scsi/scsi_mid_low_api.rst
+++ linux-libre-6.16-gnu/Documentation/scsi/scsi_mid_low_api.rst
@@ -37,7 +37,7 @@ ISA adapters).]
 The SCSI mid level isolates an LLD from other layers such as the SCSI
 upper layer drivers and the block layer.
 
-This version of the document roughly matches linux kernel version 2.6.8 .
+This version of the document roughly matches Linux kernel version 2.6.8 .
 
 Documentation
 =============
@@ -48,7 +48,7 @@ found in that directory. A more recent copy of this document may be found
 at https://docs.kernel.org/scsi/scsi_mid_low_api.html. Many LLDs are
 documented in Documentation/scsi (e.g. aic7xxx.rst). The SCSI mid-level is
 briefly described in scsi.rst which contains a URL to a document describing
-the SCSI subsystem in the Linux Kernel 2.4 series. Two upper level
+the SCSI subsystem in the Linux kernel 2.4 series. Two upper level
 drivers have documents in that directory: st.rst (SCSI tape driver) and
 scsi-generic.rst (for the sg driver).
 
@@ -75,7 +75,7 @@ It is probably best to study how existing LLDs are organized.
 As the 2.5 series development kernels evolve into the 2.6 series
 production series, changes are being introduced into this interface. An
 example of this is driver initialization code where there are now 2 models
-available. The older one, similar to what was found in the lk 2.4 series,
+available. The older one, similar to what was found in the Linux 2.4 series,
 is based on hosts that are detected at HBA driver load time. This will be
 referred to the "passive" initialization model. The newer model allows HBAs
 to be hot plugged (and unplugged) during the lifetime of the LLD and will
@@ -1026,7 +1026,7 @@ initialized from the driver's struct scsi_host_template instance. Members
 of interest:
 
     host_no
-		 - system wide unique number that is used for identifying
+		 - system-wide unique number that is used for identifying
                    this host. Issued in ascending order from 0.
     can_queue
 		 - must be greater than 0; do not send more than can_queue
@@ -1053,7 +1053,7 @@ of interest:
 		 - pointer to driver's struct scsi_host_template from which
                    this struct Scsi_Host instance was spawned
     hostt->proc_name
-		 - name of LLD. This is the driver name that sysfs uses
+		 - name of LLD. This is the driver name that sysfs uses.
     transportt
 		 - pointer to driver's struct scsi_transport_template instance
                    (if any). FC and SPI transports currently supported.
@@ -1067,7 +1067,7 @@ The scsi_host structure is defined in include/scsi/scsi_host.h
 struct scsi_device
 ------------------
 Generally, there is one instance of this structure for each SCSI logical unit
-on a host. Scsi devices connected to a host are uniquely identified by a
+on a host. SCSI devices connected to a host are uniquely identified by a
 channel number, target id and logical unit number (lun).
 The structure is defined in include/scsi/scsi_device.h
 
@@ -1091,7 +1091,7 @@ Members of interest:
 		 - should be set by LLD prior to calling 'done'. A value
                    of 0 implies a successfully completed command (and all
                    data (if any) has been transferred to or from the SCSI
-                   target device). 'result' is a 32 bit unsigned integer that
+                   target device). 'result' is a 32-bit unsigned integer that
                    can be viewed as 2 related bytes. The SCSI status value is
                    in the LSB. See include/scsi/scsi.h status_byte() and
                    host_byte() macros and related constants.
@@ -1180,8 +1180,8 @@ may get out of synchronization. This is why it is best for the LLD
 to perform autosense.
 
 
-Changes since lk 2.4 series
-===========================
+Changes since Linux kernel 2.4 series
+=====================================
 io_request_lock has been replaced by several finer grained locks. The lock
 relevant to LLDs is struct Scsi_Host::host_lock and there is
 one per SCSI host.
diff --git linux-libre-6.15-gnu/Documentation/sound/codecs/cs35l56.rst linux-libre-6.16-gnu/Documentation/sound/codecs/cs35l56.rst
index 3bb34a1301ec..cc77026f2dd5 100644
--- linux-libre-6.15-gnu/Documentation/sound/codecs/cs35l56.rst
+++ linux-libre-6.16-gnu/Documentation/sound/codecs/cs35l56.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0-only
 
-=====================================================================
-Audio drivers for Cirrus Logic CS35L54/56/57 Boosted Smart Amplifiers
-=====================================================================
+========================================================================
+Audio drivers for Cirrus Logic CS35L54/56/57/63 Boosted Smart Amplifiers
+========================================================================
 :Copyright: 2025 Cirrus Logic, Inc. and
                  Cirrus Logic International Semiconductor Ltd.
 
@@ -13,11 +13,11 @@ Summary
 
 The high-level summary of this document is:
 
-**If you have a laptop that uses CS35L54/56/57 amplifiers but audio is not
+**If you have a laptop that uses CS35L54/56/57/63 amplifiers but audio is not
 working, DO NOT ATTEMPT TO USE FIRMWARE AND SETTINGS FROM ANOTHER LAPTOP,
 EVEN IF THAT LAPTOP SEEMS SIMILAR.**
 
-The CS35L54/56/57 amplifiers must be correctly configured for the power
+The CS35L54/56/57/63 amplifiers must be correctly configured for the power
 supply voltage, speaker impedance, maximum speaker voltage/current, and
 other external hardware connections.
 
@@ -34,6 +34,7 @@ The cs35l56 drivers support:
 * CS35L54
 * CS35L56
 * CS35L57
+* CS35L63
 
 There are two drivers in the kernel
 
@@ -43,6 +44,10 @@ There are two drivers in the kernel
 
 /*(DEBLOBBED)*/
 
+The CS35L56 Rev B0 continues to use the old filename scheme because a
+large number of firmware files have already been published with these
+names.
+
 Sound Open Firmware and ALSA topology files
 -------------------------------------------
 
diff --git linux-libre-6.15-gnu/Documentation/sound/soc/index.rst linux-libre-6.16-gnu/Documentation/sound/soc/index.rst
index e57df2dab2fd..8bed8f8f48da 100644
--- linux-libre-6.15-gnu/Documentation/sound/soc/index.rst
+++ linux-libre-6.16-gnu/Documentation/sound/soc/index.rst
@@ -18,3 +18,4 @@ The documentation is spilt into the following sections:-
    jack
    dpcm
    codec-to-codec
+   usb
diff --git linux-libre-6.15-gnu/Documentation/sound/soc/usb.rst linux-libre-6.16-gnu/Documentation/sound/soc/usb.rst
new file mode 100644
index 000000000000..94c12f9d9dd1
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/sound/soc/usb.rst
@@ -0,0 +1,482 @@
+================
+ASoC USB support
+================
+
+Overview
+========
+In order to leverage the existing USB sound device support in ALSA, the
+ASoC USB APIs are introduced to allow the subsystems to exchange
+configuration information.
+
+One potential use case would be to support USB audio offloading, which is
+an implementation that allows for an alternate power-optimized path in the audio
+subsystem to handle the transfer of audio data over the USB bus.  This would
+let the main processor to stay in lower power modes for longer duration.  The
+following is an example design of how the ASoC and ALSA pieces can be connected
+together to achieve this:
+
+::
+
+               USB                   |            ASoC
+                                     |  _________________________
+                                     | |   ASoC Platform card    |
+                                     | |_________________________|
+                                     |         |           |
+                                     |      ___V____   ____V____
+                                     |     |ASoC BE | |ASoC FE  |
+                                     |     |DAI LNK | |DAI LNK  |
+                                     |     |________| |_________|
+                                     |         ^  ^        ^
+                                     |         |  |________|
+                                     |      ___V____    |
+                                     |     |SoC-USB |   |
+     ________       ________               |        |   |
+    |USB SND |<--->|USBSND  |<------------>|________|   |
+    |(card.c)|     |offld   |<----------                |
+    |________|     |________|___     | |                |
+        ^               ^       |    | |    ____________V_________
+        |               |       |    | |   |IPC                   |
+     __ V_______________V_____  |    | |   |______________________|
+    |USB SND (endpoint.c)     | |    | |              ^
+    |_________________________| |    | |              |
+                ^               |    | |   ___________V___________
+                |               |    | |->|audio DSP              |
+     ___________V_____________  |    |    |_______________________|
+    |XHCI HCD                 |<-    |
+    |_________________________|      |
+
+
+SoC USB driver
+==============
+Structures
+----------
+``struct snd_soc_usb``
+
+  - ``list``: list head for SND SoC struct list
+  - ``component``: reference to ASoC component
+  - ``connection_status_cb``: callback to notify connection events
+  - ``update_offload_route_info``: callback to fetch selected USB sound card/PCM
+    device
+  - ``priv_data``: driver data
+
+The snd_soc_usb structure can be referenced using the ASoC platform card
+device, or a USB device (udev->dev).  This is created by the ASoC BE DAI
+link, and the USB sound entity will be able to pass information to the
+ASoC BE DAI link using this structure.
+
+``struct snd_soc_usb_device``
+
+  - ``card_idx``: sound card index associated with USB sound device
+  - ``chip_idx``: USB sound chip array index
+  - ``cpcm_idx``: capture pcm device indexes associated with the USB sound device
+  - ``ppcm_idx``: playback pcm device indexes associated with the USB sound device
+  - ``num_playback``: number of playback streams
+  - ``num_capture``: number of capture streams
+  - ``list``: list head for the USB sound device list
+
+The struct snd_soc_usb_device is created by the USB sound offload driver.
+This will carry basic parameters/limitations that will be used to
+determine the possible offloading paths for this USB audio device.
+
+Functions
+---------
+.. code-block:: rst
+
+	int snd_soc_usb_find_supported_format(int card_idx,
+			struct snd_pcm_hw_params *params, int direction)
+..
+
+  - ``card_idx``: the index into the USB sound chip array.
+  - ``params``: Requested PCM parameters from the USB DPCM BE DAI link
+  - ``direction``: capture or playback
+
+**snd_soc_usb_find_supported_format()** ensures that the requested audio profile
+being requested by the external DSP is supported by the USB device.
+
+Returns 0 on success, and -EOPNOTSUPP on failure.
+
+.. code-block:: rst
+
+	int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+..
+
+  - ``usbdev``: the usb device that was discovered
+  - ``sdev``: capabilities of the device
+
+**snd_soc_usb_connect()** notifies the ASoC USB DCPM BE DAI link of a USB
+audio device detection.  This can be utilized in the BE DAI
+driver to keep track of available USB audio devices.  This is intended
+to be called by the USB offload driver residing in USB SND.
+
+Returns 0 on success, negative error code on failure.
+
+.. code-block:: rst
+
+	int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+..
+
+  - ``usbdev``: the usb device that was removed
+  - ``sdev``: capabilities to free
+
+**snd_soc_usb_disconnect()** notifies the ASoC USB DCPM BE DAI link of a USB
+audio device removal.  This is intended to be called by the USB offload
+driver that resides in USB SND.
+
+.. code-block:: rst
+
+	void *snd_soc_usb_find_priv_data(struct device *usbdev)
+..
+
+  - ``usbdev``: the usb device to reference to find private data
+
+**snd_soc_usb_find_priv_data()** fetches the private data saved to the SoC USB
+device.
+
+Returns pointer to priv_data on success, NULL on failure.
+
+.. code-block:: rst
+
+	int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
+					struct snd_soc_jack *jack)
+..
+
+  - ``component``: ASoC component to add the jack
+  - ``jack``: jack component to populate
+
+**snd_soc_usb_setup_offload_jack()** is a helper to add a sound jack control to
+the platform sound card.  This will allow for consistent naming to be used on
+designs that support USB audio offloading.  Additionally, this will enable the
+jack to notify of changes.
+
+Returns 0 on success, negative otherwise.
+
+.. code-block:: rst
+
+	int snd_soc_usb_update_offload_route(struct device *dev, int card, int pcm,
+					     int direction, enum snd_soc_usb_kctl path,
+					     long *route)
+..
+
+  - ``dev``: USB device to look up offload path mapping
+  - ``card``: USB sound card index
+  - ``pcm``: USB sound PCM device index
+  - ``direction``: direction to fetch offload routing information
+  - ``path``: kcontrol selector - pcm device or card index
+  - ``route``: mapping of sound card and pcm indexes for the offload path.  This is
+	       an array of two integers that will carry the card and pcm device indexes
+	       in that specific order.  This can be used as the array for the kcontrol
+	       output.
+
+**snd_soc_usb_update_offload_route()** calls a registered callback to the USB BE DAI
+link to fetch the information about the mapped ASoC devices for executing USB audio
+offload for the device. ``route`` may be a pointer to a kcontrol value output array,
+which carries values when the kcontrol is read.
+
+Returns 0 on success, negative otherwise.
+
+.. code-block:: rst
+
+	struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
+			void *data);
+..
+
+  - ``component``: DPCM BE DAI link component
+  - ``data``: private data
+
+**snd_soc_usb_allocate_port()** allocates a SoC USB device and populates standard
+parameters that is used for further operations.
+
+Returns a pointer to struct soc_usb on success, negative on error.
+
+.. code-block:: rst
+
+	void snd_soc_usb_free_port(struct snd_soc_usb *usb);
+..
+
+  - ``usb``: SoC USB device to free
+
+**snd_soc_usb_free_port()** frees a SoC USB device.
+
+.. code-block:: rst
+
+	void snd_soc_usb_add_port(struct snd_soc_usb *usb);
+..
+
+  - ``usb``: SoC USB device to add
+
+**snd_soc_usb_add_port()** add an allocated SoC USB device to the SOC USB framework.
+Once added, this device can be referenced by further operations.
+
+.. code-block:: rst
+
+	void snd_soc_usb_remove_port(struct snd_soc_usb *usb);
+..
+
+  - ``usb``: SoC USB device to remove
+
+**snd_soc_usb_remove_port()** removes a SoC USB device from the SoC USB framework.
+After removing a device, any SOC USB operations would not be able to reference the
+device removed.
+
+How to Register to SoC USB
+--------------------------
+The ASoC DPCM USB BE DAI link is the entity responsible for allocating and
+registering the SoC USB device on the component bind.  Likewise, it will
+also be responsible for freeing the allocated resources.  An example can
+be shown below:
+
+.. code-block:: rst
+
+	static int q6usb_component_probe(struct snd_soc_component *component)
+	{
+		...
+		data->usb = snd_soc_usb_allocate_port(component, 1, &data->priv);
+		if (!data->usb)
+			return -ENOMEM;
+
+		usb->connection_status_cb = q6usb_alsa_connection_cb;
+
+		ret = snd_soc_usb_add_port(usb);
+		if (ret < 0) {
+			dev_err(component->dev, "failed to add usb port\n");
+			goto free_usb;
+		}
+		...
+	}
+
+	static void q6usb_component_remove(struct snd_soc_component *component)
+	{
+		...
+		snd_soc_usb_remove_port(data->usb);
+		snd_soc_usb_free_port(data->usb);
+	}
+
+	static const struct snd_soc_component_driver q6usb_dai_component = {
+		.probe = q6usb_component_probe,
+		.remove = q6usb_component_remove,
+		.name = "q6usb-dai-component",
+		...
+	};
+..
+
+BE DAI links can pass along vendor specific information as part of the
+call to allocate the SoC USB device.  This will allow any BE DAI link
+parameters or settings to be accessed by the USB offload driver that
+resides in USB SND.
+
+USB Audio Device Connection Flow
+--------------------------------
+USB devices can be hotplugged into the USB ports at any point in time.
+The BE DAI link should be aware of the current state of the physical USB
+port, i.e. if there are any USB devices with audio interface(s) connected.
+connection_status_cb() can be used to notify the BE DAI link of any change.
+
+This is called whenever there is a USB SND interface bind or remove event,
+using snd_soc_usb_connect() or snd_soc_usb_disconnect():
+
+.. code-block:: rst
+
+	static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
+	{
+		...
+		snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
+		...
+	}
+
+	static void qc_usb_audio_offload_disconnect(struct snd_usb_audio *chip)
+	{
+		...
+		snd_soc_usb_disconnect(usb_get_usb_backend(chip->dev), dev->sdev);
+		...
+	}
+..
+
+In order to account for conditions where driver or device existence is
+not guaranteed, USB SND exposes snd_usb_rediscover_devices() to resend the
+connect events for any identified USB audio interfaces.  Consider the
+the following situation:
+
+	**usb_audio_probe()**
+	  | --> USB audio streams allocated and saved to usb_chip[]
+	  | --> Propagate connect event to USB offload driver in USB SND
+	  | --> **snd_soc_usb_connect()** exits as USB BE DAI link is not ready
+
+	BE DAI link component probe
+	  | --> DAI link is probed and SoC USB port is allocated
+	  | --> The USB audio device connect event is missed
+
+To ensure connection events are not missed, **snd_usb_rediscover_devices()**
+is executed when the SoC USB device is registered.  Now, when the BE DAI
+link component probe occurs, the following highlights the sequence:
+
+	BE DAI link component probe
+	  | --> DAI link is probed and SoC USB port is allocated
+	  | --> SoC USB device added, and **snd_usb_rediscover_devices()** runs
+
+	**snd_usb_rediscover_devices()**
+	  | --> Traverses through usb_chip[] and for non-NULL entries issue
+	  |     **connection_status_cb()**
+
+In the case where the USB offload driver is unbound, while USB SND is ready,
+the **snd_usb_rediscover_devices()** is called during module init.  This allows
+for the offloading path to also be enabled with the following flow:
+
+	**usb_audio_probe()**
+	  | --> USB audio streams allocated and saved to usb_chip[]
+	  | --> Propagate connect event to USB offload driver in USB SND
+	  | --> USB offload driver **NOT** ready!
+
+	BE DAI link component probe
+	  | --> DAI link is probed and SoC USB port is allocated
+	  | --> No USB connect event due to missing USB offload driver
+
+	USB offload driver probe
+	  | --> **qc_usb_audio_offload_init()**
+	  | --> Calls **snd_usb_rediscover_devices()** to notify of devices
+
+USB Offload Related Kcontrols
+=============================
+Details
+-------
+A set of kcontrols can be utilized by applications to help select the proper sound
+devices to enable USB audio offloading.  SoC USB exposes the get_offload_dev()
+callback that designs can use to ensure that the proper indices are returned to the
+application.
+
+Implementation
+--------------
+
+**Example:**
+
+  **Sound Cards**:
+
+	::
+
+	  0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D
+						SM8250-MTP-WCD9380-WSA8810-VA-DMIC
+	  1 [Seri           ]: USB-Audio - Plantronics Blackwire 3225 Seri
+						Plantronics Plantronics Blackwire
+						3225 Seri at usb-xhci-hcd.1.auto-1.1,
+						full sp
+	  2 [C320M          ]: USB-Audio - Plantronics C320-M
+                      Plantronics Plantronics C320-M at usb-xhci-hcd.1.auto-1.2, full speed
+
+  **PCM Devices**:
+
+	::
+
+	  card 0: SM8250MTPWCD938 [SM8250-MTP-WCD9380-WSA8810-VA-D], device 0: MultiMedia1 (*) []
+	  Subdevices: 1/1
+	  Subdevice #0: subdevice #0
+	  card 0: SM8250MTPWCD938 [SM8250-MTP-WCD9380-WSA8810-VA-D], device 1: MultiMedia2 (*) []
+	  Subdevices: 1/1
+	  Subdevice #0: subdevice #0
+	  card 1: Seri [Plantronics Blackwire 3225 Seri], device 0: USB Audio [USB Audio]
+	  Subdevices: 1/1
+	  Subdevice #0: subdevice #0
+	  card 2: C320M [Plantronics C320-M], device 0: USB Audio [USB Audio]
+	  Subdevices: 1/1
+	  Subdevice #0: subdevice #0
+
+  **USB Sound Card** - card#1:
+
+	::
+
+	  USB Offload Playback Card Route PCM#0   -1 (range -1->32)
+	  USB Offload Playback PCM Route PCM#0    -1 (range -1->255)
+
+  **USB Sound Card** - card#2:
+
+	::
+
+	  USB Offload Playback Card Route PCM#0   0 (range -1->32)
+	  USB Offload Playback PCM Route PCM#0    1 (range -1->255)
+
+The above example shows a scenario where the system has one ASoC platform card
+(card#0) and two USB sound devices connected (card#1 and card#2).  When reading
+the available kcontrols for each USB audio device, the following kcontrols lists
+the mapped offload card and pcm device indexes for the specific USB device:
+
+	``USB Offload Playback Card Route PCM#*``
+
+	``USB Offload Playback PCM Route PCM#*``
+
+The kcontrol is indexed, because a USB audio device could potentially have
+several PCM devices.  The above kcontrols are defined as:
+
+  - ``USB Offload Playback Card Route PCM#`` **(R)**: Returns the ASoC platform sound
+    card index for a mapped offload path.  The output **"0"** (card index) signifies
+    that there is an available offload path for the USB SND device through card#0.
+    If **"-1"** is seen, then no offload path is available for the USB SND device.
+    This kcontrol exists for each USB audio device that exists in the system, and
+    its expected to derive the current status of offload based on the output value
+    for the kcontrol along with the PCM route kcontrol.
+
+  - ``USB Offload Playback PCM Route PCM#`` **(R)**: Returns the ASoC platform sound
+    PCM device index for a mapped offload path.  The output **"1"** (PCM device index)
+    signifies that there is an available offload path for the USB SND device through
+    PCM device#0. If **"-1"** is seen, then no offload path is available for the USB\
+    SND device.  This kcontrol exists for each USB audio device that exists in the
+    system, and its expected to derive the current status of offload based on the
+    output value for this kcontrol, in addition to the card route kcontrol.
+
+USB Offload Playback Route Kcontrol
+-----------------------------------
+In order to allow for vendor specific implementations on audio offloading device
+selection, the SoC USB layer exposes the following:
+
+.. code-block:: rst
+
+	int (*update_offload_route_info)(struct snd_soc_component *component,
+					 int card, int pcm, int direction,
+					 enum snd_soc_usb_kctl path,
+					 long *route)
+..
+
+These are specific for the **USB Offload Playback Card Route PCM#** and **USB
+Offload PCM Route PCM#** kcontrols.
+
+When users issue get calls to the kcontrol, the registered SoC USB callbacks will
+execute the registered function calls to the DPCM BE DAI link.
+
+**Callback Registration:**
+
+.. code-block:: rst
+
+	static int q6usb_component_probe(struct snd_soc_component *component)
+	{
+	...
+	usb = snd_soc_usb_allocate_port(component, 1, &data->priv);
+	if (IS_ERR(usb))
+		return -ENOMEM;
+
+	usb->connection_status_cb = q6usb_alsa_connection_cb;
+	usb->update_offload_route_info = q6usb_get_offload_dev;
+
+	ret = snd_soc_usb_add_port(usb);
+..
+
+Existing USB Sound Kcontrol
+---------------------------
+With the introduction of USB offload support, the above USB offload kcontrol
+will be added to the pre existing list of kcontrols identified by the USB sound
+framework.  These kcontrols are still the main controls that are used to
+modify characteristics pertaining to the USB audio device.
+
+	::
+
+	  Number of controls: 9
+	  ctl     type    num     name                                    value
+	  0       INT     2       Capture Channel Map                     0, 0 (range 0->36)
+	  1       INT     2       Playback Channel Map                    0, 0 (range 0->36)
+	  2       BOOL    1       Headset Capture Switch                  On
+	  3       INT     1       Headset Capture Volume                  10 (range 0->13)
+	  4       BOOL    1       Sidetone Playback Switch                On
+	  5       INT     1       Sidetone Playback Volume                4096 (range 0->8192)
+	  6       BOOL    1       Headset Playback Switch                 On
+	  7       INT     2       Headset Playback Volume                 20, 20 (range 0->24)
+	  8       INT     1       USB Offload Playback Card Route PCM#0   0 (range -1->32)
+	  9       INT     1       USB Offload Playback PCM Route PCM#0    1 (range -1->255)
+
+Since USB audio device controls are handled over the USB control endpoint, use the
+existing mechanisms present in the USB mixer to set parameters, such as volume.
diff --git linux-libre-6.15-gnu/Documentation/sphinx/automarkup.py linux-libre-6.16-gnu/Documentation/sphinx/automarkup.py
index ecf54d22e9dc..fd633f7a0bc3 100644
--- linux-libre-6.15-gnu/Documentation/sphinx/automarkup.py
+++ linux-libre-6.16-gnu/Documentation/sphinx/automarkup.py
@@ -128,13 +128,8 @@ def note_failure(target):
 # own C role, but both match the same regex, so we try both.
 #
 def markup_func_ref_sphinx3(docname, app, match):
-    cdom = app.env.domains['c']
-    #
-    # Go through the dance of getting an xref out of the C domain
-    #
     base_target = match.group(2)
     target_text = nodes.Text(match.group(0))
-    xref = None
     possible_targets = [base_target]
     # Check if this document has a namespace, and if so, try
     # cross-referencing inside it first.
@@ -146,22 +141,8 @@ def markup_func_ref_sphinx3(docname, app, match):
             if (target not in Skipfuncs) and not failure_seen(target):
                 lit_text = nodes.literal(classes=['xref', 'c', 'c-func'])
                 lit_text += target_text
-                pxref = addnodes.pending_xref('', refdomain = 'c',
-                                              reftype = 'function',
-                                              reftarget = target,
-                                              modname = None,
-                                              classname = None)
-                #
-                # XXX The Latex builder will throw NoUri exceptions here,
-                # work around that by ignoring them.
-                #
-                try:
-                    xref = cdom.resolve_xref(app.env, docname, app.builder,
-                                             'function', target, pxref,
-                                             lit_text)
-                except NoUri:
-                    xref = None
-
+                xref = add_and_resolve_xref(app, docname, 'c', 'function',
+                                            target, contnode=lit_text)
                 if xref:
                     return xref
                 note_failure(target)
@@ -188,13 +169,8 @@ def markup_c_ref(docname, app, match):
                    RE_typedef: 'type',
                    }
 
-    cdom = app.env.domains['c']
-    #
-    # Go through the dance of getting an xref out of the C domain
-    #
     base_target = match.group(2)
     target_text = nodes.Text(match.group(0))
-    xref = None
     possible_targets = [base_target]
     # Check if this document has a namespace, and if so, try
     # cross-referencing inside it first.
@@ -206,21 +182,9 @@ def markup_c_ref(docname, app, match):
             if not (match.re == RE_function and target in Skipfuncs):
                 lit_text = nodes.literal(classes=['xref', 'c', class_str[match.re]])
                 lit_text += target_text
-                pxref = addnodes.pending_xref('', refdomain = 'c',
-                                              reftype = reftype_str[match.re],
-                                              reftarget = target, modname = None,
-                                              classname = None)
-                #
-                # XXX The Latex builder will throw NoUri exceptions here,
-                # work around that by ignoring them.
-                #
-                try:
-                    xref = cdom.resolve_xref(app.env, docname, app.builder,
-                                             reftype_str[match.re], target, pxref,
-                                             lit_text)
-                except NoUri:
-                    xref = None
-
+                xref = add_and_resolve_xref(app, docname, 'c',
+                                            reftype_str[match.re], target,
+                                            contnode=lit_text)
                 if xref:
                     return xref
 
@@ -231,30 +195,12 @@ def markup_c_ref(docname, app, match):
 # cross reference to that page
 #
 def markup_doc_ref(docname, app, match):
-    stddom = app.env.domains['std']
-    #
-    # Go through the dance of getting an xref out of the std domain
-    #
     absolute = match.group(1)
     target = match.group(2)
     if absolute:
        target = "/" + target
-    xref = None
-    pxref = addnodes.pending_xref('', refdomain = 'std', reftype = 'doc',
-                                  reftarget = target, modname = None,
-                                  classname = None, refexplicit = False)
-    #
-    # XXX The Latex builder will throw NoUri exceptions here,
-    # work around that by ignoring them.
-    #
-    try:
-        xref = stddom.resolve_xref(app.env, docname, app.builder, 'doc',
-                                   target, pxref, None)
-    except NoUri:
-        xref = None
-    #
-    # Return the xref if we got it; otherwise just return the plain text.
-    #
+
+    xref = add_and_resolve_xref(app, docname, 'std', 'doc', target)
     if xref:
         return xref
     else:
@@ -265,10 +211,6 @@ def markup_doc_ref(docname, app, match):
 # with a cross reference to that page
 #
 def markup_abi_ref(docname, app, match, warning=False):
-    stddom = app.env.domains['std']
-    #
-    # Go through the dance of getting an xref out of the std domain
-    #
     kernel_abi = get_kernel_abi()
 
     fname = match.group(1)
@@ -280,7 +222,18 @@ def markup_abi_ref(docname, app, match, warning=False):
             kernel_abi.log.warning("%s not found", fname)
         return nodes.Text(match.group(0))
 
-    pxref = addnodes.pending_xref('', refdomain = 'std', reftype = 'ref',
+    xref = add_and_resolve_xref(app, docname, 'std', 'ref', target)
+    if xref:
+        return xref
+    else:
+        return nodes.Text(match.group(0))
+
+def add_and_resolve_xref(app, docname, domain, reftype, target, contnode=None):
+    #
+    # Go through the dance of getting an xref out of the corresponding domain
+    #
+    dom_obj = app.env.domains[domain]
+    pxref = addnodes.pending_xref('', refdomain = domain, reftype = reftype,
                                   reftarget = target, modname = None,
                                   classname = None, refexplicit = False)
 
@@ -289,17 +242,15 @@ def markup_abi_ref(docname, app, match, warning=False):
     # work around that by ignoring them.
     #
     try:
-        xref = stddom.resolve_xref(app.env, docname, app.builder, 'ref',
-                                   target, pxref, None)
+        xref = dom_obj.resolve_xref(app.env, docname, app.builder, reftype,
+                                    target, pxref, contnode)
     except NoUri:
         xref = None
-    #
-    # Return the xref if we got it; otherwise just return the plain text.
-    #
+
     if xref:
         return xref
-    else:
-        return nodes.Text(match.group(0))
+
+    return None
 
 #
 # Variant of markup_abi_ref() that warns whan a reference is not found
diff --git linux-libre-6.15-gnu/Documentation/sphinx/kerneldoc.py linux-libre-6.16-gnu/Documentation/sphinx/kerneldoc.py
index 39ddae6ae7dd..b818d4c77924 100644
--- linux-libre-6.15-gnu/Documentation/sphinx/kerneldoc.py
+++ linux-libre-6.16-gnu/Documentation/sphinx/kerneldoc.py
@@ -40,8 +40,40 @@ from docutils.parsers.rst import directives, Directive
 import sphinx
 from sphinx.util.docutils import switch_source_input
 from sphinx.util import logging
+from pprint import pformat
+
+srctree = os.path.abspath(os.environ["srctree"])
+sys.path.insert(0, os.path.join(srctree, "scripts/lib/kdoc"))
+
+from kdoc_files import KernelFiles
+from kdoc_output import RestFormat
 
 __version__  = '1.0'
+kfiles = None
+logger = logging.getLogger(__name__)
+
+def cmd_str(cmd):
+    """
+    Helper function to output a command line that can be used to produce
+    the same records via command line. Helpful to debug troubles at the
+    script.
+    """
+
+    cmd_line = ""
+
+    for w in cmd:
+        if w == "" or " " in w:
+            esc_cmd = "'" + w + "'"
+        else:
+            esc_cmd = w
+
+        if cmd_line:
+            cmd_line += " " + esc_cmd
+            continue
+        else:
+            cmd_line = esc_cmd
+
+    return cmd_line
 
 class KernelDocDirective(Directive):
     """Extract kernel-doc comments from the specified file"""
@@ -56,19 +88,48 @@ class KernelDocDirective(Directive):
         'functions': directives.unchanged,
     }
     has_content = False
-    logger = logging.getLogger('kerneldoc')
+    verbose = 0
+
+    parse_args = {}
+    msg_args = {}
+
+    def handle_args(self):
 
-    def run(self):
         env = self.state.document.settings.env
         cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno']
 
         filename = env.config.kerneldoc_srctree + '/' + self.arguments[0]
+
+        # Arguments used by KernelFiles.parse() function
+        self.parse_args = {
+            "file_list": [filename],
+            "export_file": []
+        }
+
+        # Arguments used by KernelFiles.msg() function
+        self.msg_args = {
+            "enable_lineno": True,
+            "export": False,
+            "internal": False,
+            "symbol": [],
+            "nosymbol": [],
+            "no_doc_sections": False
+        }
+
         export_file_patterns = []
 
+        verbose = os.environ.get("V")
+        if verbose:
+            try:
+                self.verbose = int(verbose)
+            except ValueError:
+                pass
+
         # Tell sphinx of the dependency
         env.note_dependency(os.path.abspath(filename))
 
-        tab_width = self.options.get('tab-width', self.state.document.settings.tab_width)
+        self.tab_width = self.options.get('tab-width',
+                                          self.state.document.settings.tab_width)
 
         # 'function' is an alias of 'identifiers'
         if 'functions' in self.options:
@@ -77,80 +138,166 @@ class KernelDocDirective(Directive):
         # FIXME: make this nicer and more robust against errors
         if 'export' in self.options:
             cmd += ['-export']
+            self.msg_args["export"] = True
             export_file_patterns = str(self.options.get('export')).split()
         elif 'internal' in self.options:
             cmd += ['-internal']
+            self.msg_args["internal"] = True
             export_file_patterns = str(self.options.get('internal')).split()
         elif 'doc' in self.options:
-            cmd += ['-function', str(self.options.get('doc'))]
+            func = str(self.options.get('doc'))
+            cmd += ['-function', func]
+            self.msg_args["symbol"].append(func)
         elif 'identifiers' in self.options:
             identifiers = self.options.get('identifiers').split()
             if identifiers:
                 for i in identifiers:
+                    i = i.rstrip("\\").strip()
+                    if not i:
+                        continue
+
                     cmd += ['-function', i]
+                    self.msg_args["symbol"].append(i)
             else:
                 cmd += ['-no-doc-sections']
+                self.msg_args["no_doc_sections"] = True
 
         if 'no-identifiers' in self.options:
             no_identifiers = self.options.get('no-identifiers').split()
             if no_identifiers:
                 for i in no_identifiers:
+                    i = i.rstrip("\\").strip()
+                    if not i:
+                        continue
+
                     cmd += ['-nosymbol', i]
+                    self.msg_args["nosymbol"].append(i)
 
         for pattern in export_file_patterns:
+            pattern = pattern.rstrip("\\").strip()
+            if not pattern:
+                continue
+
             for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern):
                 env.note_dependency(os.path.abspath(f))
                 cmd += ['-export-file', f]
+                self.parse_args["export_file"].append(f)
+
+            # Export file is needed by both parse and msg, as kernel-doc
+            # cache exports.
+            self.msg_args["export_file"] = self.parse_args["export_file"]
 
         cmd += [filename]
 
-        try:
-            self.logger.verbose("calling kernel-doc '%s'" % (" ".join(cmd)))
+        return cmd
+
+    def run_cmd(self, cmd):
+        """
+        Execute an external kernel-doc command.
+        """
+
+        env = self.state.document.settings.env
+        node = nodes.section()
+
+        p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+        out, err = p.communicate()
 
-            p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
-            out, err = p.communicate()
+        out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
 
-            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
+        if p.returncode != 0:
+            sys.stderr.write(err)
 
-            if p.returncode != 0:
-                sys.stderr.write(err)
+            logger.warning("kernel-doc '%s' failed with return code %d"
+                                % (" ".join(cmd), p.returncode))
+            return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+        elif env.config.kerneldoc_verbosity > 0:
+            sys.stderr.write(err)
+
+        filenames = self.parse_args["file_list"]
+        for filename in filenames:
+            self.parse_msg(filename, node, out, cmd)
+
+        return node.children
+
+    def parse_msg(self, filename, node, out, cmd):
+        """
+        Handles a kernel-doc output for a given file
+        """
+
+        env = self.state.document.settings.env
 
-                self.logger.warning("kernel-doc '%s' failed with return code %d"
-                                    % (" ".join(cmd), p.returncode))
-                return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
-            elif env.config.kerneldoc_verbosity > 0:
-                sys.stderr.write(err)
+        lines = statemachine.string2lines(out, self.tab_width,
+                                            convert_whitespace=True)
+        result = ViewList()
+
+        lineoffset = 0;
+        line_regex = re.compile(r"^\.\. LINENO ([0-9]+)$")
+        for line in lines:
+            match = line_regex.search(line)
+            if match:
+                # sphinx counts lines from 0
+                lineoffset = int(match.group(1)) - 1
+                # we must eat our comments since the upset the markup
+            else:
+                doc = str(env.srcdir) + "/" + env.docname + ":" + str(self.lineno)
+                result.append(line, doc + ": " + filename, lineoffset)
+                lineoffset += 1
+
+        self.do_parse(result, node)
+
+    def run_kdoc(self, cmd, kfiles):
+        """
+        Execute kernel-doc classes directly instead of running as a separate
+        command.
+        """
+
+        env = self.state.document.settings.env
 
-            lines = statemachine.string2lines(out, tab_width, convert_whitespace=True)
-            result = ViewList()
+        node = nodes.section()
 
-            lineoffset = 0;
-            line_regex = re.compile(r"^\.\. LINENO ([0-9]+)$")
-            for line in lines:
-                match = line_regex.search(line)
-                if match:
-                    # sphinx counts lines from 0
-                    lineoffset = int(match.group(1)) - 1
-                    # we must eat our comments since the upset the markup
-                else:
-                    doc = str(env.srcdir) + "/" + env.docname + ":" + str(self.lineno)
-                    result.append(line, doc + ": " + filename, lineoffset)
-                    lineoffset += 1
+        kfiles.parse(**self.parse_args)
+        filenames = self.parse_args["file_list"]
 
-            node = nodes.section()
-            self.do_parse(result, node)
+        for filename, out in kfiles.msg(**self.msg_args, filenames=filenames):
+            self.parse_msg(filename, node, out, cmd)
 
-            return node.children
+        return node.children
+
+    def run(self):
+        global kfiles
+
+        cmd = self.handle_args()
+        if self.verbose >= 1:
+            logger.info(cmd_str(cmd))
+
+        try:
+            if kfiles:
+                return self.run_kdoc(cmd, kfiles)
+            else:
+                return self.run_cmd(cmd)
 
         except Exception as e:  # pylint: disable=W0703
-            self.logger.warning("kernel-doc '%s' processing failed with: %s" %
-                                (" ".join(cmd), str(e)))
+            logger.warning("kernel-doc '%s' processing failed with: %s" %
+                           (cmd_str(cmd), pformat(e)))
             return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
 
     def do_parse(self, result, node):
         with switch_source_input(self.state, result):
             self.state.nested_parse(result, 0, node, match_titles=1)
 
+def setup_kfiles(app):
+    global kfiles
+
+    kerneldoc_bin = app.env.config.kerneldoc_bin
+
+    if kerneldoc_bin and kerneldoc_bin.endswith("kernel-doc.py"):
+        print("Using Python kernel-doc")
+        out_style = RestFormat()
+        kfiles = KernelFiles(out_style=out_style, logger=logger)
+    else:
+        print(f"Using {kerneldoc_bin}")
+
+
 def setup(app):
     app.add_config_value('kerneldoc_bin', None, 'env')
     app.add_config_value('kerneldoc_srctree', None, 'env')
@@ -158,6 +305,8 @@ def setup(app):
 
     app.add_directive('kernel-doc', KernelDocDirective)
 
+    app.connect('builder-inited', setup_kfiles)
+
     return dict(
         version = __version__,
         parallel_read_safe = True,
diff --git linux-libre-6.15-gnu/Documentation/staging/rpmsg.rst linux-libre-6.16-gnu/Documentation/staging/rpmsg.rst
index 3713adaa1608..40282cca86ca 100644
--- linux-libre-6.15-gnu/Documentation/staging/rpmsg.rst
+++ linux-libre-6.16-gnu/Documentation/staging/rpmsg.rst
@@ -110,31 +110,6 @@ or a timeout of 15 seconds elapses. When the latter happens,
 The function can only be called from a process context (for now).
 Returns 0 on success and an appropriate error value on failure.
 
-::
-
-  int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
-							void *data, int len);
-
-
-sends a message across to the remote processor, using the src and dst
-addresses provided by the user.
-
-The caller should specify the endpoint, the data it wants to send,
-its length (in bytes), and explicit source and destination addresses.
-The message will then be sent to the remote processor to which the
-endpoint's channel belongs, but the endpoint's src and channel dst
-addresses will be ignored (and the user-provided addresses will
-be used instead).
-
-In case there are no TX buffers available, the function will block until
-one becomes available (i.e. until the remote processor consumes
-a tx buffer and puts it back on virtio's used descriptor ring),
-or a timeout of 15 seconds elapses. When the latter happens,
--ERESTARTSYS is returned.
-
-The function can only be called from a process context (for now).
-Returns 0 on success and an appropriate error value on failure.
-
 ::
 
   int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len);
@@ -173,27 +148,6 @@ return -ENOMEM without waiting until one becomes available.
 The function can only be called from a process context (for now).
 Returns 0 on success and an appropriate error value on failure.
 
-::
-
-  int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
-							void *data, int len);
-
-
-sends a message across to the remote processor, using source and
-destination addresses provided by the user.
-
-The user should specify the channel, the data it wants to send,
-its length (in bytes), and explicit source and destination addresses.
-The message will then be sent to the remote processor to which the
-channel belongs, but the channel's src and dst addresses will be
-ignored (and the user-provided addresses will be used instead).
-
-In case there are no TX buffers available, the function will immediately
-return -ENOMEM without waiting until one becomes available.
-
-The function can only be called from a process context (for now).
-Returns 0 on success and an appropriate error value on failure.
-
 ::
 
   struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *rpdev,
diff --git linux-libre-6.15-gnu/Documentation/staging/speculation.rst linux-libre-6.16-gnu/Documentation/staging/speculation.rst
index 8045d99bcf12..0d526ba55d14 100644
--- linux-libre-6.15-gnu/Documentation/staging/speculation.rst
+++ linux-libre-6.16-gnu/Documentation/staging/speculation.rst
@@ -63,7 +63,6 @@ of an out-of-bounds address, while the second call will influence
 microarchitectural state dependent on this value. This may provide an
 arbitrary read primitive.
 
-====================================
 Mitigating speculation side-channels
 ====================================
 
diff --git linux-libre-6.15-gnu/Documentation/tools/rtla/common_timerlat_description.rst linux-libre-6.16-gnu/Documentation/tools/rtla/common_timerlat_description.rst
index 321201cb8597..49fcae3ffdec 100644
--- linux-libre-6.15-gnu/Documentation/tools/rtla/common_timerlat_description.rst
+++ linux-libre-6.16-gnu/Documentation/tools/rtla/common_timerlat_description.rst
@@ -6,5 +6,13 @@ debugging of operating system timer latency.
 
 The *timerlat* tracer outputs information in two ways. It periodically
 prints the timer latency at the timer *IRQ* handler and the *Thread*
-handler. It also enable the trace of the most relevant information via
+handler. It also enables the trace of the most relevant information via
 **osnoise:** tracepoints.
+
+The **rtla timerlat** tool sets the options of the *timerlat* tracer
+and collects and displays a summary of the results. By default,
+the collection is done synchronously in kernel space using a dedicated
+BPF program attached to the *timerlat* tracer. If either BPF or
+the **osnoise:timerlat_sample** tracepoint it attaches to is
+unavailable, the **rtla timerlat** tool falls back to using tracefs to
+process the data asynchronously in user space.
diff --git linux-libre-6.15-gnu/Documentation/tools/rtla/rtla-timerlat.rst linux-libre-6.16-gnu/Documentation/tools/rtla/rtla-timerlat.rst
index 44a49e6f302b..20e2d259467f 100644
--- linux-libre-6.15-gnu/Documentation/tools/rtla/rtla-timerlat.rst
+++ linux-libre-6.16-gnu/Documentation/tools/rtla/rtla-timerlat.rst
@@ -16,13 +16,10 @@ DESCRIPTION
 
 .. include:: common_timerlat_description.rst
 
-The *timerlat* tracer outputs information in two ways. It periodically
-prints the timer latency at the timer *IRQ* handler and the *Thread* handler.
-It also provides information for each noise via the **osnoise:** tracepoints.
 The **rtla timerlat top** mode displays a summary of the periodic output
-from the *timerlat* tracer. The **rtla hist hist** mode displays a histogram
-of each tracer event occurrence. For further details, please refer to the
-respective man page.
+from the *timerlat* tracer. The **rtla timerlat hist** mode displays
+a histogram of each tracer event occurrence. For further details, please
+refer to the respective man page.
 
 MODES
 =====
diff --git linux-libre-6.15-gnu/Documentation/trace/coresight/coresight-perf.rst linux-libre-6.16-gnu/Documentation/trace/coresight/coresight-perf.rst
index d087aae7d492..30be89320621 100644
--- linux-libre-6.15-gnu/Documentation/trace/coresight/coresight-perf.rst
+++ linux-libre-6.16-gnu/Documentation/trace/coresight/coresight-perf.rst
@@ -78,6 +78,37 @@ enabled like::
 
 Please refer to the kernel configuration help for more information.
 
+Fine-grained tracing with AUX pause and resume
+----------------------------------------------
+
+Arm CoreSight may generate a large amount of hardware trace data, which
+will lead to overhead in recording and distract users when reviewing
+profiling result. To mitigate the issue of excessive trace data, Perf
+provides AUX pause and resume functionality for fine-grained tracing.
+
+The AUX pause and resume can be triggered by associated events. These
+events can be ftrace tracepoints (including static and dynamic
+tracepoints) or PMU events (e.g. CPU PMU cycle event). To create a perf
+session with AUX pause / resume, three configuration terms are
+introduced:
+
+- "aux-action=start-paused": it is specified for the cs_etm PMU event to
+  launch in a paused state.
+- "aux-action=pause": an associated event is specified with this term
+  to pause AUX trace.
+- "aux-action=resume": an associated event is specified with this term
+  to resume AUX trace.
+
+Example for triggering AUX pause and resume with ftrace tracepoints::
+
+  perf record -e cs_etm/aux-action=start-paused/k,syscalls:sys_enter_openat/aux-action=resume/,syscalls:sys_exit_openat/aux-action=pause/ ls
+
+Example for triggering AUX pause and resume with PMU event::
+
+  perf record -a -e cs_etm/aux-action=start-paused/k \
+        -e cycles/aux-action=pause,period=10000000/ \
+        -e cycles/aux-action=resume,period=1050000/ -- sleep 1
+
 Perf test - Verify kernel and userspace perf CoreSight work
 -----------------------------------------------------------
 
diff --git linux-libre-6.15-gnu/Documentation/trace/coresight/panic.rst linux-libre-6.16-gnu/Documentation/trace/coresight/panic.rst
index a58aa914c241..6e4bde953cae 100644
--- linux-libre-6.15-gnu/Documentation/trace/coresight/panic.rst
+++ linux-libre-6.16-gnu/Documentation/trace/coresight/panic.rst
@@ -67,8 +67,8 @@ Trace data captured at the time of panic, can be read from rebooted kernel
 or from crashdump kernel using a special device file /dev/crash_tmc_xxx.
 This device file is created only when there is a valid crashdata available.
 
-General flow of trace capture and decode incase of kernel panic
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+General flow of trace capture and decode in case of kernel panic
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1. Enable source and sink on all the cores using the sysfs interface.
    ETR sinks should have trace buffers allocated from reserved memory,
    by selecting "resrv" buffer mode from sysfs.
diff --git linux-libre-6.15-gnu/Documentation/trace/ftrace.rst linux-libre-6.16-gnu/Documentation/trace/ftrace.rst
index c9e88bf65709..af66a05e18cc 100644
--- linux-libre-6.15-gnu/Documentation/trace/ftrace.rst
+++ linux-libre-6.16-gnu/Documentation/trace/ftrace.rst
@@ -1205,6 +1205,19 @@ Here are the available options:
 	default instance. The only way the top level instance has this flag
 	cleared, is by it being set in another instance.
 
+  copy_trace_marker
+	If there are applications that hard code writing into the top level
+	trace_marker file (/sys/kernel/tracing/trace_marker or trace_marker_raw),
+	and the tooling would like it to go into an instance, this option can
+	be used. Create an instance and set this option, and then all writes
+	into the top level trace_marker file will also be redirected into this
+	instance.
+
+	Note, by default this option is set for the top level instance. If it
+	is disabled, then writes to the trace_marker or trace_marker_raw files
+	will not be written into the top level file. If no instance has this
+	option set, then a write will error with the errno of ENODEV.
+
   annotate
 	It is sometimes confusing when the CPU buffers are full
 	and one CPU buffer had a lot of events recently, thus
diff --git linux-libre-6.15-gnu/Documentation/trace/index.rst linux-libre-6.16-gnu/Documentation/trace/index.rst
index 2c991dc96ace..cc1dc5a087e8 100644
--- linux-libre-6.15-gnu/Documentation/trace/index.rst
+++ linux-libre-6.16-gnu/Documentation/trace/index.rst
@@ -1,39 +1,103 @@
-==========================
-Linux Tracing Technologies
-==========================
+================================
+Linux Tracing Technologies Guide
+================================
+
+Tracing in the Linux kernel is a powerful mechanism that allows
+developers and system administrators to analyze and debug system
+behavior. This guide provides documentation on various tracing
+frameworks and tools available in the Linux kernel.
+
+Introduction to Tracing
+-----------------------
+
+This section provides an overview of Linux tracing mechanisms
+and debugging approaches.
 
 .. toctree::
-   :maxdepth: 2
+   :maxdepth: 1
 
-   ftrace-design
+   debugging
+   tracepoints
    tracepoint-analysis
+   ring-buffer-map
+
+Core Tracing Frameworks
+-----------------------
+
+The following are the primary tracing frameworks integrated into
+the Linux kernel.
+
+.. toctree::
+   :maxdepth: 1
+
    ftrace
+   ftrace-design
    ftrace-uses
-   fprobe
    kprobes
    kprobetrace
-   uprobetracer
    fprobetrace
-   tracepoints
+   fprobe
+   ring-buffer-design
+
+Event Tracing and Analysis
+--------------------------
+
+A detailed explanation of event tracing mechanisms and their
+applications.
+
+.. toctree::
+   :maxdepth: 1
+
    events
    events-kmem
    events-power
    events-nmi
    events-msr
-   mmiotrace
+   boottime-trace
    histogram
    histogram-design
-   boottime-trace
-   debugging
-   hwlat_detector
-   osnoise-tracer
-   timerlat-tracer
+
+Hardware and Performance Tracing
+--------------------------------
+
+This section covers tracing features that monitor hardware
+interactions and system performance.
+
+.. toctree::
+   :maxdepth: 1
+
    intel_th
-   ring-buffer-design
-   ring-buffer-map
    stm
    sys-t
    coresight/index
-   user_events
    rv/index
    hisi-ptt
+   mmiotrace
+   hwlat_detector
+   osnoise-tracer
+   timerlat-tracer
+
+User-Space Tracing
+------------------
+
+These tools allow tracing user-space applications and
+interactions.
+
+.. toctree::
+   :maxdepth: 1
+
+   user_events
+   uprobetracer
+
+Additional Resources
+--------------------
+
+For more details, refer to the respective documentation of each
+tracing tool and framework.
+
+.. only:: subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.15-gnu/Documentation/trace/tracepoints.rst linux-libre-6.16-gnu/Documentation/trace/tracepoints.rst
index decabcc77b56..b35c40e3abbe 100644
--- linux-libre-6.15-gnu/Documentation/trace/tracepoints.rst
+++ linux-libre-6.16-gnu/Documentation/trace/tracepoints.rst
@@ -71,7 +71,7 @@ In subsys/file.c (where the tracing statement must be added)::
 	void somefct(void)
 	{
 		...
-		trace_subsys_eventname(arg, task);
+		trace_subsys_eventname_tp(arg, task);
 		...
 	}
 
@@ -129,12 +129,12 @@ within an if statement with the following::
 		for (i = 0; i < count; i++)
 			tot += calculate_nuggets();
 
-		trace_foo_bar(tot);
+		trace_foo_bar_tp(tot);
 	}
 
-All trace_<tracepoint>() calls have a matching trace_<tracepoint>_enabled()
+All trace_<tracepoint>_tp() calls have a matching trace_<tracepoint>_enabled()
 function defined that returns true if the tracepoint is enabled and
-false otherwise. The trace_<tracepoint>() should always be within the
+false otherwise. The trace_<tracepoint>_tp() should always be within the
 block of the if (trace_<tracepoint>_enabled()) to prevent races between
 the tracepoint being enabled and the check being seen.
 
@@ -143,7 +143,10 @@ the static_key of the tracepoint to allow the if statement to be implemented
 with jump labels and avoid conditional branches.
 
 .. note:: The convenience macro TRACE_EVENT provides an alternative way to
-      define tracepoints. Check http://lwn.net/Articles/379903,
+      define tracepoints. Note, DECLARE_TRACE(foo) creates a function
+      "trace_foo_tp()" whereas TRACE_EVENT(foo) creates a function
+      "trace_foo()", and also exposes the tracepoint as a trace event in
+      /sys/kernel/tracing/events directory.  Check http://lwn.net/Articles/379903,
       http://lwn.net/Articles/381064 and http://lwn.net/Articles/383362
       for a series of articles with more details.
 
@@ -159,7 +162,9 @@ In a C file::
 
 	void do_trace_foo_bar_wrapper(args)
 	{
-		trace_foo_bar(args);
+		trace_foo_bar_tp(args); // for tracepoints created via DECLARE_TRACE
+					//   or
+		trace_foo_bar(args);    // for tracepoints created via TRACE_EVENT
 	}
 
 In the header file::
diff --git linux-libre-6.15-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst linux-libre-6.16-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
index 6ee713988531..baa344f4523a 100644
--- linux-libre-6.15-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
+++ linux-libre-6.16-gnu/Documentation/translations/it_IT/core-api/symbol-namespaces.rst
@@ -10,8 +10,8 @@ Questo documento descrive come usare lo spazio dei nomi dei simboli
 per strutturare quello che viene esportato internamente al kernel
 grazie alle macro della famiglia EXPORT_SYMBOL().
 
-1. Introduzione
-===============
+Introduzione
+============
 
 Lo spazio dei nomi dei simboli è stato introdotto come mezzo per strutturare
 l'API esposta internamente al kernel. Permette ai manutentori di un
@@ -24,15 +24,15 @@ devono prima importare detto spazio. Altrimenti il kernel, a seconda
 della configurazione, potrebbe rifiutare di caricare il modulo o
 avvisare l'utente di un'importazione mancante.
 
-2. Come definire uno spazio dei nomi dei simboli
-================================================
+Come definire uno spazio dei nomi dei simboli
+=============================================
 
 I simboli possono essere esportati in spazi dei nomi usando diversi
 meccanismi.  Tutti questi meccanismi cambiano il modo in cui
 EXPORT_SYMBOL e simili vengono guidati verso la creazione di voci in ksymtab.
 
-2.1 Usare le macro EXPORT_SYMBOL
-================================
+Usare le macro EXPORT_SYMBOL
+----------------------------
 
 In aggiunta alle macro EXPORT_SYMBOL() e EXPORT_SYMBOL_GPL(), che permettono
 di esportare simboli del kernel nella rispettiva tabella, ci sono
@@ -53,8 +53,8 @@ di base. Il programma ``modpost`` e il codice in kernel/module/main.c usano lo
 spazio dei nomi, rispettivamente, durante la compilazione e durante il
 caricamento di un modulo.
 
-2.2 Usare il simbolo di preprocessore DEFAULT_SYMBOL_NAMESPACE
-==============================================================
+Usare il simbolo di preprocessore DEFAULT_SYMBOL_NAMESPACE
+----------------------------------------------------------
 
 Definire lo spazio dei nomi per tutti i simboli di un sottosistema può essere
 logorante e di difficile manutenzione. Perciò è stato fornito un simbolo
@@ -83,8 +83,8 @@ direttamente nei file da compilare. L'esempio precedente diventerebbe::
 
 Questo va messo prima di un qualsiasi uso di EXPORT_SYMBOL.
 
-3. Come usare i simboli esportati attraverso uno spazio dei nomi
-================================================================
+Come usare i simboli esportati attraverso uno spazio dei nomi
+=============================================================
 
 Per usare i simboli esportati da uno spazio dei nomi, i moduli del
 kernel devono esplicitamente importare il relativo spazio dei nomi; altrimenti
@@ -108,12 +108,10 @@ modinfo::
 
 
 Si consiglia di posizionare la dichiarazione MODULE_IMPORT_NS() vicino
-ai metadati del modulo come MODULE_AUTHOR() o MODULE_LICENSE(). Fate
-riferimento alla sezione 5. per creare automaticamente le importazioni
-mancanti.
+ai metadati del modulo come MODULE_AUTHOR() o MODULE_LICENSE().
 
-4. Caricare moduli che usano simboli provenienti da spazi dei nomi
-==================================================================
+Caricare moduli che usano simboli provenienti da spazi dei nomi
+===============================================================
 
 Quando un modulo viene caricato (per esempio usando ``insmod``), il kernel
 verificherà la disponibilità di ogni simbolo usato e se lo spazio dei nomi
@@ -125,8 +123,8 @@ un'opzione di configurazione: impostare
 MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y caricherà i moduli comunque ma
 emetterà un avviso.
 
-5. Creare automaticamente la dichiarazione MODULE_IMPORT_NS
-===========================================================
+Creare automaticamente la dichiarazione MODULE_IMPORT_NS
+========================================================
 
 La mancanza di un'importazione può essere individuata facilmente al momento
 della compilazione. Infatti, modpost emetterà un avviso se il modulo usa
diff --git linux-libre-6.15-gnu/Documentation/translations/it_IT/process/changes.rst linux-libre-6.16-gnu/Documentation/translations/it_IT/process/changes.rst
index c7d05e2fff15..77db13c4022b 100644
--- linux-libre-6.15-gnu/Documentation/translations/it_IT/process/changes.rst
+++ linux-libre-6.16-gnu/Documentation/translations/it_IT/process/changes.rst
@@ -32,13 +32,13 @@ PC Card, per esempio, probabilmente non dovreste preoccuparvi di pcmciautils.
 ====================== =================  ========================================
         Programma       Versione minima       Comando per verificare la versione
 ====================== =================  ========================================
-GNU C                  5.1                gcc --version
+GNU C                  8.1                gcc --version
 Clang/LLVM (optional)  13.0.0             clang --version
 Rust (opzionale)       1.78.0             rustc --version
 bindgen (opzionale)    0.65.1             bindgen --version
 GNU make               4.0                make --version
 bash                   4.2                bash --version
-binutils               2.25               ld -v
+binutils               2.30               ld -v
 flex                   2.5.35             flex --version
 bison                  2.0                bison --version
 pahole                 1.16               pahole --version
@@ -118,7 +118,7 @@ Questo richiede bash 4.2 o successivo.
 Binutils
 --------
 
-Per generare il kernel è necessario avere Binutils 2.25 o superiore.
+Per generare il kernel è necessario avere Binutils 2.30 o superiore.
 
 pkg-config
 ----------
diff --git linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/2.Process.rst linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/2.Process.rst
index 5993eed71563..c21b0134cfa1 100644
--- linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/2.Process.rst
+++ linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/2.Process.rst
@@ -428,13 +428,14 @@ los desarrolladores, que corren el riesgo de quedar enterrados bajo una
 carga de correo electrónico, incumplir las convenciones utilizadas en las
 listas de Linux, o ambas cosas.
 
-La mayoría de las listas de correo del kernel se ejecutan en
-vger.kernel.org; la lista principal se puede encontrar en:
+La mayoría de las listas de correo del kernel se alojan en kernel.org; la
+lista principal se puede encontrar en:
 
-	http://vger.kernel.org/vger-lists.html
+	https://subspace.kernel.org
 
-Sim embargo, hay listas alojadas en otros lugares; varios de ellos se
-encuentran en redhat.com/mailman/listinfo.
+Sin embargo, hay listas alojadas en otros lugares; consulte el archivo
+MAINTAINERS para obtener la lista relevante para cualquier subsistema en
+particular.
 
 La lista de correo principal para el desarrollo del kernel es, por
 supuesto, linux-kernel. Esta lista es un lugar intimidante; el volumen
diff --git linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/howto.rst linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/howto.rst
index 72ea855ac9dc..e1a6e6a52ae4 100644
--- linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/howto.rst
+++ linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/howto.rst
@@ -334,7 +334,7 @@ con el árbol principal, necesitan probar su integración. Para ello, existe
 un repositorio especial de pruebas en el que se encuentran casi todos los
 árboles de subsistema, actualizado casi a diario:
 
-	https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
 
 De esta manera, linux-next ofrece una perspectiva resumida de lo que se
 espera que entre en el kernel principal en el próximo período de "merge"
@@ -378,13 +378,13 @@ desarrolladores del kernel participan en la lista de correo del kernel de
 Linux. Detalles sobre cómo para suscribirse y darse de baja de la lista se
 pueden encontrar en:
 
-	http://vger.kernel.org/vger-lists.html#linux-kernel
+	https://subspace.kernel.org/subscribing.html
 
 Existen archivos de la lista de correo en la web en muchos lugares
 distintos. Utilice un motor de búsqueda para encontrar estos archivos. Por
 ejemplo:
 
-	http://dir.gmane.org/gmane.linux.kernel
+	https://lore.kernel.org/linux-kernel/
 
 Es muy recomendable que busque en los archivos sobre el tema que desea
 tratar, antes de publicarlo en la lista. Un montón de cosas ya discutidas
@@ -398,13 +398,13 @@ los diferentes grupos.
 Muchas de las listas están alojadas en kernel.org. La información sobre
 estas puede ser encontrada en:
 
-	http://vger.kernel.org/vger-lists.html
+	https://subspace.kernel.org
 
 Recuerde mantener buenos hábitos de comportamiento al usar las listas.
 Aunque un poco cursi, la siguiente URL tiene algunas pautas simples para
 interactuar con la lista (o cualquier lista):
 
-	http://www.albion.com/netiquette/
+	https://subspace.kernel.org/etiquette.html
 
 Si varias personas responden a su correo, el CC (lista de destinatarios)
 puede hacerse bastante grande. No elimine a nadie de la lista CC: sin una
diff --git linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/kernel-docs.rst linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/kernel-docs.rst
index a62c6854f59b..b9e0ca4be324 100644
--- linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/kernel-docs.rst
+++ linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/kernel-docs.rst
@@ -170,9 +170,8 @@ Recursos varios
 
     * Título: **linux-kernel mailing list archives and search engines**
 
-      :URL: http://vger.kernel.org/vger-lists.html
-      :URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html
-      :URL: http://groups.google.com/group/mlist.linux.kernel
+      :URL: https://subspace.kernel.org
+      :URL: https://lore.kernel.org
       :Palabras Clave: linux-kernel, archives, buscar, search, archivos.
       :Descripción: Algunos de los archivadores de listas de correo del
         kernel de Linux. Si usted tiene uno mejor/otro, por favor hágamelo
diff --git linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/submitting-patches.rst linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/submitting-patches.rst
index 328ec80bd61d..ecb08b14c2c0 100644
--- linux-libre-6.15-gnu/Documentation/translations/sp_SP/process/submitting-patches.rst
+++ linux-libre-6.16-gnu/Documentation/translations/sp_SP/process/submitting-patches.rst
@@ -136,11 +136,11 @@ algo documentado en la web, referencie esto.
 
 Cuando se vincule a archivos de listas de correo, preferiblemente use el
 servicio de archivador de mensajes lore.kernel.org. Para crear la URL del
-enlace, utilice el contenido del encabezado ("header") ``Message-Id`` del
+enlace, utilice el contenido del encabezado ("header") ``Message-ID`` del
 mensaje sin los corchetes angulares que lo rodean.
 Por ejemplo::
 
-    Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/
+    Link: https://lore.kernel.org/30th.anniversary.repost@klaava.Helsinki.FI
 
 Verifique el enlace para asegurarse de que realmente funciona y apunta al
 mensaje correspondiente.
@@ -257,10 +257,10 @@ archivo MAINTAINERS una lista específica de los subsistemas; su parche
 probablemente recibirá más atención allí. Sin embargo, no envíe spam a
 listas no relacionadas.
 
-Muchas listas relacionadas con el kernel están alojadas en vger.kernel.org;
+Muchas listas relacionadas con el kernel están alojadas en kernel.org;
 puedes encontrar un listado de estas en
-http://vger.kernel.org/vger-lists.html. Existen listas relacionadas con el
-kernel alojadas en otros lugares, no obstante.
+https://subspace.kernel.org. Existen listas relacionadas con el kernel
+alojadas en otros lugares, no obstante.
 
 ¡No envíe más de 15 parches a la vez a las listas de correo de vger!
 
@@ -907,9 +907,6 @@ Referencias
 
   <http://www.kroah.com/log/linux/maintainer-06.html>
 
-NO!!!! Gente, no mas bombas enormes de parches a linux-kernel@vger.kernel.org!
-  <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net>
-
 Kernel Documentation/process/coding-style.rst
 
 Email de Linus Torvalds sobre la forma canónica de los parches:
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/admin-guide/README.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/admin-guide/README.rst
index 1bdafdc4c8e2..82e628b77efd 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/admin-guide/README.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/admin-guide/README.rst
@@ -224,7 +224,7 @@ Linux内核6.x版本 <http://kernel.org/>
 编译内核
 ---------
 
- - 确保您至少有gcc 5.1可用。
+ - 确保您至少有gcc 8.1可用。
    有关更多信息，请参阅 :ref:`Documentation/process/changes.rst <changes>` 。
 
  - 执行 ``make`` 来创建压缩内核映像。如果您安装了lilo以适配内核makefile，
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/admin-guide/bug-hunting.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/admin-guide/bug-hunting.rst
index c3f6a83294dc..4b3432753eb9 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/admin-guide/bug-hunting.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/admin-guide/bug-hunting.rst
@@ -188,7 +188,7 @@ objdump
 编行。如果没有调试符号，您将看到所示例程的汇编程序代码，但是如果内核有调试
 符号，C代码也将可见（调试符号可以在内核配置菜单的hacking项中启用）。例如::
 
-    $ objdump -r -S -l --disassemble net/dccp/ipv4.o
+    $ objdump -r -S -l --disassemble net/ipv4/tcp.o
 
 .. note::
 
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
index 9174fce12c1b..4a2d3b27aa4d 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
@@ -60,8 +60,6 @@ irq_domain和一个hwirq号作为参数。 如果hwirq的映射还不存在，
 
 - irq_find_mapping()返回给定域和hwirq的Linux IRQ号，如果没有映射则返回0。
 
-- irq_linear_revmap()现与irq_find_mapping()相同，已被废弃。
-
 - generic_handle_domain_irq()处理一个由域和hwirq号描述的中断。
 
 请注意，irq域的查找必须发生在与RCU读临界区兼容的上下文中。
@@ -83,7 +81,6 @@ irq_domain映射的类型
 
 ::
 
-	irq_domain_add_linear()
 	irq_domain_create_linear()
 
 线性反向映射维护了一个固定大小的表，该表以hwirq号为索引。 当一个hwirq被映射
@@ -104,7 +101,6 @@ irq_domain_add_linear()和irq_domain_create_linear()在功能上是等价的，
 
 ::
 
-	irq_domain_add_tree()
 	irq_domain_create_tree()
 
 irq_domain维护着从hwirq号到Linux IRQ的radix的树状映射。 当一个hwirq被映射时，
@@ -124,7 +120,7 @@ irq_domain_add_tree()和irq_domain_create_tree()在功能上是等价的，除
 
 ::
 
-	irq_domain_add_nomap()
+	irq_domain_create_nomap()
 
 当硬件中的hwirq号是可编程的时候，就可以采用无映射类型。 在这种情况下，最好将
 Linux IRQ号编入硬件本身，这样就不需要映射了。 调用irq_create_direct_mapping()
@@ -138,8 +134,6 @@ Linux IRQ号编入硬件本身，这样就不需要映射了。 调用irq_create
 
 ::
 
-	irq_domain_add_simple()
-	irq_domain_add_legacy()
 	irq_domain_create_simple()
 	irq_domain_create_legacy()
 
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/printk-formats.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/printk-formats.rst
index bd36d35eba4e..96a917ecc93f 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/printk-formats.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/printk-formats.rst
@@ -523,9 +523,8 @@ clk结构体
 ::
 
 	%pC	pll1
-	%pCn	pll1
 
-用于打印clk结构。%pC 和 %pCn 打印时钟的名称（通用时钟框架）或唯一的32位
+用于打印clk结构。%pC 打印时钟的名称（通用时钟框架）或唯一的32位
 ID（传统时钟框架）。
 
 通过引用传递。
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
index b1bec219912d..d9477ccea98f 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
@@ -14,18 +14,8 @@
 
 本文档描述了如何使用符号命名空间来构造通过EXPORT_SYMBOL()系列宏导出的内核内符号的导出面。
 
-.. 目录
-
-       === 1 简介
-       === 2 如何定义符号命名空间
-          --- 2.1 使用EXPORT_SYMBOL宏
-          --- 2.2 使用DEFAULT_SYMBOL_NAMESPACE定义
-       === 3 如何使用命名空间中导出的符号
-       === 4 加载使用命名空间符号的模块
-       === 5 自动创建MODULE_IMPORT_NS声明
-
-1. 简介
-=======
+简介
+====
 
 符号命名空间已经被引入，作为构造内核内API的导出面的一种手段。它允许子系统维护者将
 他们导出的符号划分进独立的命名空间。这对于文档的编写非常有用（想想SUBSYSTEM_DEBUG
@@ -33,14 +23,14 @@
 的模块必须导入命名空间。否则，内核将根据其配置，拒绝加载该模块或警告说缺少
 导入。
 
-2. 如何定义符号命名空间
-=======================
+如何定义符号命名空间
+====================
 
 符号可以用不同的方法导出到命名空间。所有这些都在改变 EXPORT_SYMBOL 和与之类似的那些宏
 被检测到的方式，以创建 ksymtab 条目。
 
-2.1 使用EXPORT_SYMBOL宏
-=======================
+使用EXPORT_SYMBOL宏
+-------------------
 
 除了允许将内核符号导出到内核符号表的宏EXPORT_SYMBOL()和EXPORT_SYMBOL_GPL()之外，
 这些宏的变体还可以将符号导出到某个命名空间：EXPORT_SYMBOL_NS() 和 EXPORT_SYMBOL_NS_GPL()。
@@ -54,8 +44,8 @@
 导出时未指明命名空间的符号将指向 ``NULL`` 。如果没有定义命名空间，则默认没有。
 ``modpost`` 和kernel/module/main.c分别在构建时或模块加载时使用名称空间。
 
-2.2 使用DEFAULT_SYMBOL_NAMESPACE定义
-====================================
+使用DEFAULT_SYMBOL_NAMESPACE定义
+--------------------------------
 
 为一个子系统的所有符号定义命名空间可能会非常冗长，并可能变得难以维护。因此，我
 们提供了一个默认定义（DEFAULT_SYMBOL_NAMESPACE），如果设置了这个定义， 它将成
@@ -80,8 +70,8 @@
 
 应置于相关编译单元中任何 EXPORT_SYMBOL 宏之前
 
-3. 如何使用命名空间中导出的符号
-===============================
+如何使用命名空间中导出的符号
+============================
 
 为了使用被导出到命名空间的符号，内核模块需要明确地导入这些命名空间。
 否则内核可能会拒绝加载该模块。模块代码需要使用宏MODULE_IMPORT_NS来
@@ -100,11 +90,10 @@
 
 
 建议将 MODULE_IMPORT_NS() 语句添加到靠近其他模块元数据定义的地方，
-如 MODULE_AUTHOR() 或 MODULE_LICENSE() 。关于自动创建缺失的导入
-语句的方法，请参考第5节。
+如 MODULE_AUTHOR() 或 MODULE_LICENSE() 。
 
-4. 加载使用命名空间符号的模块
-=============================
+加载使用命名空间符号的模块
+==========================
 
 在模块加载时（比如 ``insmod`` ），内核将检查每个从模块中引用的符号是否可
 用，以及它可能被导出到的名字空间是否被模块导入。内核的默认行为是拒绝
@@ -113,8 +102,8 @@ EINVAL方式失败。要允许加载不满足这个前提条件的模块，可
 设置 MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y 将使加载不受影响，但会
 发出警告。
 
-5. 自动创建MODULE_IMPORT_NS声明
-===============================
+自动创建MODULE_IMPORT_NS声明
+============================
 
 缺少命名空间的导入可以在构建时很容易被检测到。事实上，如果一个模块
 使用了一个命名空间的符号而没有导入它，modpost会发出警告。
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst
index 3c133a918f30..282aacd33442 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst
@@ -120,35 +120,31 @@ Kgdb内核调试器、QEMU等虚拟机管理程序或基于JTAG的硬件接口
 
 - 对当前或指定的CPU使用per-cpu函数::
 
-    (gdb) p $lx_per_cpu("runqueues").nr_running
+    (gdb) p $lx_per_cpu(runqueues).nr_running
     $3 = 1
-    (gdb) p $lx_per_cpu("runqueues", 2).nr_running
+    (gdb) p $lx_per_cpu(runqueues, 2).nr_running
     $4 = 0
 
 - 使用container_of查看更多hrtimers信息::
 
-    (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
-    (gdb) p *$container_of($next, "struct hrtimer", "node")
+    (gdb) set $leftmost = $lx_per_cpu(hrtimer_bases).clock_base[0].active.rb_root.rb_leftmost
+    (gdb) p *$container_of($leftmost, "struct hrtimer", "node")
     $5 = {
       node = {
         node = {
-          __rb_parent_color = 18446612133355256072,
-          rb_right = 0x0 <irq_stack_union>,
-          rb_left = 0x0 <irq_stack_union>
+          __rb_parent_color = 18446612686384860673,
+          rb_right = 0xffff888231da8b00,
+          rb_left = 0x0
         },
-        expires = {
-          tv64 = 1835268000000
-        }
+        expires = 1228461000000
       },
-      _softexpires = {
-        tv64 = 1835268000000
-      },
-      function = 0xffffffff81078232 <tick_sched_timer>,
-      base = 0xffff88003fd0d6f0,
-      state = 1,
-      start_pid = 0,
-      start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
-      start_comm = "swapper/2\000\000\000\000\000\000"
+      _softexpires = 1228461000000,
+      function = 0xffffffff8137ab20 <tick_nohz_handler>,
+      base = 0xffff888231d9b4c0,
+      state = 1 '\001',
+      is_rel = 0 '\000',
+      is_soft = 0 '\000',
+      is_hard = 1 '\001'
     }
 
 
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/devicetree/overlay-notes.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/devicetree/overlay-notes.rst
index 43e3c0bc5a9f..ba5edd05dc1e 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/devicetree/overlay-notes.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/devicetree/overlay-notes.rst
@@ -43,10 +43,10 @@ Documentation/devicetree/dynamic-resolution-notes.rst[1]的配套文档。
 	};
     ---- foo.dts ---------------------------------------------------------------
 
-覆盖bar.dts,
+覆盖bar.dtso,
 ::
 
-    ---- bar.dts - 按标签覆盖目标位置 ----------------------------
+    ---- bar.dtso - 按标签覆盖目标位置 ---------------------------
 	/dts-v1/;
 	/插件/;
 	&ocp {
@@ -56,7 +56,7 @@ Documentation/devicetree/dynamic-resolution-notes.rst[1]的配套文档。
 			... /* 各种属性和子节点 */
 		};
 	};
-    ---- bar.dts ---------------------------------------------------------------
+    ---- bar.dtso --------------------------------------------------------------
 
 当加载（并按照[1]中描述的方式解决）时，应该产生foo+bar.dts::
 
@@ -90,9 +90,9 @@ Documentation/devicetree/dynamic-resolution-notes.rst[1]的配套文档。
 DT中的适当位置。在这种情况下，可以提供目标路径。通过标签的目标位置的语法是比
 较好的，因为不管标签在DT中出现在哪里，覆盖都可以被应用到任何包含标签的基础DT上。
 
-上面的bar.dts例子被修改为使用目标路径语法，即为::
+上面的bar.dtso例子被修改为使用目标路径语法，即为::
 
-    ---- bar.dts - 通过明确的路径覆盖目标位置 --------------------
+    ---- bar.dtso - 通过明确的路径覆盖目标位置 -------------------
 	/dts-v1/;
 	/插件/;
 	&{/ocp} {
@@ -102,7 +102,7 @@ DT中的适当位置。在这种情况下，可以提供目标路径。通过标
 			... /* 各种外围设备和子节点 */
 		}
 	};
-    ---- bar.dts ---------------------------------------------------------------
+    ---- bar.dtso --------------------------------------------------------------
 
 
 内核中关于覆盖的API
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
index e4d54724a1b5..f64a69f771ca 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/driver-api/gpio/index.rst
@@ -42,7 +42,7 @@ ACPI支持
 
 该API在以下内核代码中:
 
-drivers/gpio/gpiolib-acpi.c
+drivers/gpio/gpiolib-acpi-core.c
 
 设备树支持
 ==========
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/how-to.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/how-to.rst
new file mode 100644
index 000000000000..569b0209385a
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/how-to.rst
@@ -0,0 +1,459 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Linux内核中文文档翻译规范
+=========================
+
+修订记录：
+ - v1.0 2025年3月28日，司延腾、慕冬亮共同编写了该规范。
+
+制定规范的背景
+==============
+
+过去几年，在广大社区爱好者的友好合作下，Linux 内核中文文档迎来了蓬勃的发
+展。在翻译的早期，一切都是混乱的，社区对译稿只有一个准确翻译的要求，以鼓
+励更多的开发者参与进来，这是从0到1的必然过程，所以早期的中文文档目录更加
+具有多样性，不过好在文档不多，维护上并没有过大的压力。
+
+然而，世事变幻，不觉有年，现在内核中文文档在前进的道路上越走越远，很多潜
+在的问题逐渐浮出水面，而且随着中文文档数量的增加，翻译更多的文档与提高中
+文文档可维护性之间的矛盾愈发尖锐。由于文档翻译的特殊性，很多开发者并不会
+一直更新文档，如果中文文档落后英文文档太多，文档更新的工作量会远大于重新
+翻译。而且邮件列表中陆续有新的面孔出现，他们那股热情，就像燃烧的火焰，能
+瞬间点燃整个空间，可是他们的补丁往往具有个性，这会给审阅带来了很大的困难，
+reviewer 们只能耐心地指导他们如何与社区更好地合作，但是这项工作具有重复
+性，长此以往，会渐渐浇灭 reviewer 审阅的热情。
+
+虽然内核文档中已经有了类似的贡献指南，但是缺乏专门针对于中文翻译的，尤其
+是对于新手来说，浏览大量的文档反而更加迷惑，该文档就是为了缓解这一问题而
+编写，目的是为提供给新手一个快速翻译指南。
+
+详细的贡献指南：Documentation/translations/zh_CN/process/index.rst。
+
+环境搭建
+========
+
+工欲善其事必先利其器，如果您目前对内核文档翻译满怀热情，并且会独立地安装
+linux 发行版和简单地使用 linux 命令行，那么可以迅速开始了。若您尚不具备该
+能力，很多网站上会有详细的手把手教程，最多一个上午，您应该就能掌握对应技
+能。您需要注意的一点是，请不要使用 root 用户进行后续步骤和文档翻译。
+
+拉取开发树
+----------
+
+中文文档翻译工作目前独立于 linux-doc 开发树开展，所以您需要拉取该开发树，
+打开终端命令行执行::
+
+	git clone git://git.kernel.org/pub/scm/linux/kernel/git/alexs/linux.git
+
+如果您遇到网络连接问题，也可以执行以下命令::
+
+	git clone https://mirrors.hust.edu.cn/git/kernel-doc-zh.git linux
+
+这是 Alex 开发树的镜像库，每两个小时同步一次上游。如果您了解到更快的 mirror，
+请随时 **添加** 。
+
+命令执行完毕后，您会在当前目录下得到一个 linux 目录，该目录就是您之后的工作
+仓库，请把它放在一个稳妥的位置。
+
+安装文档构建环境
+----------------
+
+内核仓库里面提供了一个半自动化脚本，执行该脚本，会检测您的发行版中需要安
+装哪些软件包，请按照命令行提示进行安装，通常您只需要复制命令并执行就行。
+::
+
+	cd linux
+	./scripts/sphinx-pre-install
+
+以Fedora为例，它的输出是这样的::
+
+	You should run:
+
+		sudo dnf install -y dejavu-sans-fonts dejavu-sans-mono-fonts dejavu-serif-fonts google-noto-sans-cjk-fonts graphviz-gd latexmk librsvg2-tools texlive-anyfontsize texlive-capt-of texlive-collection-fontsrecommended texlive-ctex texlive-eqparbox texlive-fncychap texlive-framed texlive-luatex85 texlive-multirow texlive-needspace texlive-tabulary texlive-threeparttable texlive-upquote texlive-wrapfig texlive-xecjk
+
+	Sphinx needs to be installed either:
+	1) via pip/pypi with:
+
+		/usr/bin/python3 -m venv sphinx_latest
+		. sphinx_latest/bin/activate
+		pip install -r ./Documentation/sphinx/requirements.txt
+
+	    If you want to exit the virtualenv, you can use:
+		deactivate
+
+	2) As a package with:
+
+		sudo dnf install -y python3-sphinx
+
+	    Please note that Sphinx >= 3.0 will currently produce false-positive
+	   warning when the same name is used for more than one type (functions,
+	   structs, enums,...). This is known Sphinx bug. For more details, see:
+		https://github.com/sphinx-doc/sphinx/pull/8313
+
+请您按照提示复制打印的命令到命令行执行，您必须具备 root 权限才能执行 sudo
+开头的命令。
+
+如果您处于一个多用户环境中，为了避免对其他人造成影响，建议您配置单用户
+sphinx 虚拟环境，即只需要执行::
+
+	/usr/bin/python3 -m venv sphinx_latest
+	. sphinx_latest/bin/activate
+	pip install -r ./Documentation/sphinx/requirements.txt
+
+最后执行以下命令退出虚拟环境::
+
+	deactivate
+
+您可以在任何需要的时候再次执行以下命令进入虚拟环境::
+
+	. sphinx_latest/bin/activate
+
+进行第一次文档编译
+------------------
+
+进入开发树目录::
+
+	cd linux
+
+这是一个标准的编译和调试流程，请每次构建时都严格执行::
+
+	. sphinx_latest/bin/activate
+	make cleandocs
+	make htmldocs
+	deactivate
+
+检查编译结果
+------------
+
+编译输出在Documentation/output/目录下，请用浏览器打开该目录下对应
+的文件进行检查。
+
+git和邮箱配置
+-------------
+
+打开命令行执行::
+
+	sudo dnf install git-email
+	vim ~/.gitconfig
+
+这里是我的一个配置文件示范，请根据您的邮箱域名服务商提供的手册替换到对
+应的字段。
+::
+
+	[user]
+	       name = Yanteng Si		# 这会出现在您的补丁头部签名栏
+	       email = si.yanteng@linux.dev	# 这会出现在您的补丁头部签名栏
+
+	[sendemail]
+	       from = Yanteng Si <si.yanteng@linux.dev>	# 这会出现在您的补丁头部
+	       smtpencryption = ssl
+	       smtpserver = smtp.migadu.com
+	       smtpuser = si.yanteng@linux.dev
+	       smtppass = <passwd>      # 建议使用第三方客户端专用密码
+	       chainreplyto = false
+	       smtpserverport = 465
+
+关于邮件客户端的配置，请查阅Documentation/translations/zh_CN/process/email-clients.rst。
+
+开始翻译文档
+============
+
+文档索引结构
+------------
+
+目前中文文档是在Documentation/translations/zh_CN/目录下进行，该
+目录结构最终会与Documentation/结构一致，所以您只需要将您感兴趣的英文
+文档文件和对应的 index.rst 复制到 zh_CN 目录下对应的位置，然后修改更
+上一级的 index 即可开始您的翻译。
+
+为了保证翻译的文档补丁被顺利合并，不建议多人同时翻译一个目录，因为这会
+造成补丁之间互相依赖，往往会导致一部分补丁被合并，另一部分产生冲突。
+
+如果实在无法避免两个人同时对一个目录进行翻译的情况，请将补丁制作进一个补
+丁集。但是不推荐刚开始就这么做，因为经过实践，在没有指导的情况下，新手很
+难一次处理好这个补丁集。
+
+请执行以下命令，新建开发分支::
+
+	git checkout docs-next
+	git branch my-trans
+	git checkout my-trans
+
+译文格式要求
+------------
+
+	- 每行长度最多不超过40个字符
+	- 每行长度请保持一致
+	- 标题的下划线长度请按照一个英文一个字符、一个中文两个字符与标题对齐
+	- 其它的修饰符请与英文文档保持一致
+
+此外在译文的头部，您需要插入以下内容::
+
+	.. SPDX-License-Identifier: GPL-2.0
+	.. include:: ../disclaimer-zh_CN.rst  #您需要了解该文件的路径，根
+						据您实际翻译的文档灵活调整
+
+	:Original: Documentation/xxx/xxx.rst  #替换为您翻译的英文文档路径
+
+	:翻译:
+
+	 司延腾 Yanteng Si <si.yanteng@linux.dev> #替换为您自己的联系方式
+
+翻译技巧
+--------
+
+中文文档有每行40字符限制，因为一个中文字符等于2个英文字符。但是社区并没有
+那么严格，一个诀窍是将您的翻译的内容与英文原文的每行长度对齐即可，这样，
+您也不必总是检查有没有超限。
+
+如果您的英文阅读能力有限，可以考虑使用辅助翻译工具，例如 deepseek 。但是您
+必须仔细地打磨，使译文达到“信达雅”的标准。
+
+**请注意** 社区不接受纯机器翻译的文档，社区工作建立在信任的基础上，请认真对待。
+
+编译和检查
+----------
+
+请执行::
+
+	. sphinx_latest/bin/activate
+	make cleandocs
+	make htmldocs
+
+解决与您翻译的文档相关的 warning 和 error，然后执行::
+
+	make cleandocs	#该步骤不能省略，否则可能不会再次输出真实存在的警告
+	make htmldocs
+	deactivate
+
+进入 output 目录用浏览器打开您翻译的文档，检查渲染的页面是否正常，如果正常，
+继续进行后续步骤，否则请尝试解决。
+
+制作补丁
+========
+
+提交改动
+--------
+
+执行以下命令，在弹出的交互式页面中填写必要的信息。
+::
+
+	git add .
+	git commit -s -v
+
+请参考以下信息进行输入::
+
+	docs/zh_CN: Add self-protection index Chinese translation
+
+	Translate .../security/self-protection.rst into Chinese.
+
+	Update the translation through commit b080e52110ea	#请执行git log <您翻译的英文文档路径> 复制最顶部第一个补丁的sha值的前12位，替换掉12位sha值。
+	("docs: update self-protection __ro_after_init status")
+
+	Signed-off-by: Yanteng Si <si.yanteng@linux.dev>	#如果您前面的步骤正确执行，该行会自动显示，否则请检查gitconfig文件。
+
+保存并退出。
+
+**请注意** 以上四行，缺少任何一行，您都将会在第一轮审阅后返工，如果您需要一个更加明确的示例，请对 zh_CN 目录执行 git log。
+
+导出补丁和制作封面
+------------------
+
+这个时候，可以导出补丁，做发送邮件列表最后的准备了。命令行执行::
+
+	git format-patch -N
+
+然后命令行会输出类似下面的内容::
+
+	0001-docs-zh_CN-add-xxxxxxxx.patch
+	0002-docs-zh_CN-add-xxxxxxxx.patch
+	……
+
+测试补丁
+--------
+
+内核提供了一个补丁检测脚本，请执行::
+
+	./scripts/checkpatch.pl *.patch
+
+参考脚本输出，解决掉所有的 error 和 warning，通常情况下，只有下面这个
+warning 不需要解决::
+
+	WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
+
+一个简单的解决方法是一次只检查一个补丁，然后打上该补丁，直接对译文进行修改，
+然后执行以下命令为补丁追加更改::
+
+	git checkout docs-next
+	git branch test-trans
+	git am 0001-xxxxx.patch
+	./scripts/checkpatch.pl 0001-xxxxx.patch
+	直接修改您的翻译
+	git add .
+	git am --amend
+	保存退出
+	git am 0002-xxxxx.patch
+	……
+
+重新导出再次检测，重复这个过程，直到处理完所有的补丁。
+
+最后，如果检测时没有 warning 和 error 需要被处理或者您只有一个补丁，请跳
+过下面这个步骤，否则请重新导出补丁制作封面::
+
+	git format-patch -N --cover-letter --thread=shallow  #N为您的补丁数量,N一般要大于1。
+
+然后命令行会输出类似下面的内容::
+
+	0000-cover-letter.patch
+	0001-docs-zh_CN-add-xxxxxxxx.patch
+	0002-docs-zh_CN-add-xxxxxxxx.patch
+
+您需要用编辑器打开0号补丁，修改两处内容::
+
+	vim 0000-cover-letter.patch
+
+	...
+	Subject: [PATCH 0/1] *** SUBJECT HERE ***	#修改该字段，概括您的补丁集都做了哪些事情
+
+	*** BLURB HERE ***				#修改该字段，详细描述您的补丁集做了哪些事情
+
+	Yanteng Si (1):
+	  docs/zh_CN: add xxxxx
+	...
+
+如果您只有一个补丁，则可以不制作封面，即0号补丁，只需要执行::
+
+	git format-patch -1
+
+把补丁提交到邮件列表
+====================
+
+恭喜您，您的文档翻译现在可以提交到邮件列表了。
+
+获取维护者和审阅者邮箱以及邮件列表地址
+--------------------------------------
+
+内核提供了一个自动化脚本工具，请执行::
+
+	./scripts/get_maintainer.pl *.patch
+
+将输出的邮箱地址保存下来。
+
+将补丁提交到邮件列表
+--------------------
+
+打开上面您保存的邮件地址，执行::
+
+	git send-email *.patch --to <maintainer email addr> --cc <others addr>	#一个to对应一个地址，一个cc对应一个地址，有几个就写几个。
+
+执行该命令时，请确保网络通常，邮件发送成功一般会返回250。
+
+您可以先发送给自己，尝试发出的 patch 是否可以用 'git am' 工具正常打上。
+如果检查正常， 您就可以放心的发送到社区评审了。
+
+如果该步骤被中断，您可以检查一下，继续用上条命令发送失败的补丁，一定不要再
+次发送已经发送成功的补丁。
+
+积极参与审阅过程并迭代补丁
+==========================
+
+补丁提交到邮件列表并不代表万事大吉，您还需要积极回复 maintainer 和
+reviewer 的评论，做到每条都有回复，每个回复都落实到位。
+
+如何回复评论
+------------
+
+ - 请先将您的邮箱客户端信件回复修改为 **纯文本** 格式，并去除所有签名，尤其是
+   企业邮箱。
+ - 然后点击回复按钮，并将要回复的邮件带入，
+ - 在第一条评论行尾换行，输入您的回复
+ - 在第二条评论行尾换行，输入您的回复
+ - 直到处理完最后一条评论，换行空两行输入问候语和署名
+
+注意，信件回复请尽量使用英文。
+
+迭代补丁
+--------
+
+建议您每回复一条评论，就修改一处翻译。然后重新生成补丁，相信您现在已经具
+备了灵活使用 git am --amend 的能力。
+
+每次迭代一个补丁，不要一次多个::
+
+	git am <您要修改的补丁>
+	直接对文件进行您的修改
+	git add .
+	git commit --amend
+
+当您将所有的评论落实到位后，导出第二版补丁，并修改封面::
+
+	git format-patch -N  -v 2 --cover-letter --thread=shallow
+
+打开0号补丁，在 BLURB HERE 处编写相较于上个版本，您做了哪些改动。
+
+然后执行::
+
+	git send-email v2* --to <maintainer email addr> --cc <others addr>
+
+这样，新的一版补丁就又发送到邮件列表等待审阅，之后就是重复这个过程。
+
+审阅周期
+--------
+
+因为有时邮件列表比较繁忙，您的邮件可能会被淹没，如果超过两周没有得到任何
+回复，请自己回复自己，回复的内容为 Ping.
+
+最终，如果您落实好了所有的评论，并且一段时间后没有最新的评论，您的补丁将
+会先进入 Alex 的开发树，然后进入 linux-doc 开发树，最终在下个窗口打开
+时合并进 mainline 仓库。
+
+紧急处理
+--------
+
+如果您发送到邮件列表之后。发现发错了补丁集，尤其是在多个版本迭代的过程中；
+自己发现了一些不妥的翻译；发送错了邮件列表……
+
+git email默认会抄送给您一份，所以您可以切换为审阅者的角色审查自己的补丁，
+并留下评论，描述有何不妥，将在下个版本怎么改，并付诸行动，重新提交，但是
+注意频率，每天提交的次数不要超过两次。
+
+新手任务
+--------
+对于首次参与 Linux 内核中文文档翻译的新手，建议您在 linux 目录中运行以下命令：
+::
+
+	./script/checktransupdate.py -l zh_CN``
+
+该命令会列出需要翻译或更新的英文文档。
+
+关于详细操作说明，请参考： Documentation/translations/zh_CN/doc-guide/checktransupdate.rst\
+
+进阶
+----
+
+希望您不只是单纯的翻译内核文档，在熟悉了一起与社区工作之后，您可以审阅其他
+开发者的翻译，或者提出具有建设性的主张。与此同时，与文档对应的代码更加有趣，
+而且需要完善的地方还有很多，勇敢地去探索，然后提交你的想法吧。
+
+常见的问题
+==========
+
+Maintainer回复补丁不能正常apply
+-------------------------------
+
+这通常是因为您的补丁与邮件列表其他人的补丁产生了冲突，别人的补丁先被 apply 了，
+您的补丁集就无法成功 apply 了，这需要您更新本地分支，在本地解决完冲突后再次提交。
+
+请尽量避免冲突，不要多个人同时翻译一个目录。翻译之前可以通过 git log 查看您感
+兴趣的目录近期有没有其他人翻译，如果有，请提前私信联系对方，请求其代为发送您
+的补丁。如果对方未来一个月内没有提交新补丁的打算，您可以独自发送。
+
+回信被邮件列表拒收
+------------------
+
+大部分情况下，是由于您发送了非纯文本格式的信件，请尽量避免使用 webmail，推荐
+使用邮件客户端，比如 thunderbird，记得在设置中的回信配置那改为纯文本发送。
+
+如果超过了24小时，您依旧没有在<https://lore.kernel.org/linux-doc/>发现您的邮
+件，请联系您的网络管理员帮忙解决。
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/index.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/index.rst
index cc512ca54172..b08c09d8e96e 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_CN/index.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/index.rst
@@ -21,18 +21,18 @@
 这是中文内核文档树的顶级目录。内核文档，就像内核本身一样，在很大程度上是一
 项正在进行的工作；当我们努力将许多分散的文件整合成一个连贯的整体时尤其如此。
 另外，随时欢迎您对内核文档进行改进；如果您想提供帮助，请加入vger.kernel.org
-上的linux-doc邮件列表。
-
-顺便说下，中文文档也需要遵守内核编码风格，风格中中文和英文的主要不同就是中文
-的字符标点占用两个英文字符宽度，所以，当英文要求不要超过每行100个字符时，
-中文就不要超过50个字符。另外，也要注意'-'，'='等符号与相关标题的对齐。在将
-补丁提交到社区之前，一定要进行必要的 ``checkpatch.pl`` 检查和编译测试，确保
-在 ``make htmldocs/pdfdocs`` 中不增加新的告警，最后，安装检查你生成的
-html/pdf 文件，确认它们看起来是正常的。
-
-提交之前请确认你的补丁可以正常提交到中文文档维护库:
-https://git.kernel.org/pub/scm/linux/kernel/git/alexs/linux.git/
-如果你的补丁依赖于其他人的补丁, 可以与其他人商量后由某一个人合并提交。
+上的linux-doc邮件列表，并按照Documentation/translations/zh_CN/how-to.rst的
+指引提交补丁。提交补丁之前请确保执行"make htmldocs”后无与翻译有关的异常输出。
+
+如何翻译内核文档
+----------------
+
+翻译文档本身是一件很简单的事情，但是提交补丁需要注意一些细节，为了保证内核中文文档的高质量可持续发展，提供了一份翻译指南。
+
+.. toctree::
+   :maxdepth: 1
+
+   how-to.rst
 
 与Linux 内核社区一起工作
 ------------------------
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/networking/index.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/networking/index.rst
new file mode 100644
index 000000000000..d07dd69f980b
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/networking/index.rst
@@ -0,0 +1,160 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/networking/index.rst
+
+:翻译:
+
+ 王亚鑫 Wang Yaxin <wang.yaxin@zte.com.cn>
+
+:校译:
+
+网络
+====
+
+有关网络设备（netdev）开发过程的详细指南，请参考：:ref:`netdev-FAQ`
+
+目录：
+
+.. toctree::
+   :maxdepth: 1
+
+   msg_zerocopy
+
+Todolist:
+
+*   af_xdp
+*   bareudp
+*   batman-adv
+*   can
+*   can_ucan_protocol
+*   device_drivers/index
+*   diagnostic/index
+*   dsa/index
+*   devlink/index
+*   caif/index
+*   ethtool-netlink
+*   ieee802154
+*   iso15765-2
+*   j1939
+*   kapi
+*   failover
+*   net_dim
+*   net_failover
+*   page_pool
+*   phy
+*   sfp-phylink
+*   alias
+*   bridge
+*   snmp_counter
+*   checksum-offloads
+*   segmentation-offloads
+*   scaling
+*   tls
+*   tls-offload
+*   tls-handshake
+*   nfc
+*   6lowpan
+*   6pack
+*   arcnet-hardware
+*   arcnet
+*   atm
+*   ax25
+*   bonding
+*   cdc_mbim
+*   dccp
+*   dctcp
+*   devmem
+*   dns_resolver
+*   driver
+*   eql
+*   fib_trie
+*   filter
+*   generic-hdlc
+*   generic_netlink
+*   netlink_spec/index
+*   gen_stats
+*   gtp
+*   ila
+*   ioam6-sysctl
+*   ip_dynaddr
+*   ipsec
+*   ip-sysctl
+*   ipv6
+*   ipvlan
+*   ipvs-sysctl
+*   kcm
+*   l2tp
+*   lapb-module
+*   mac80211-injection
+*   mctp
+*   mpls-sysctl
+*   mptcp
+*   mptcp-sysctl
+*   multiqueue
+*   multi-pf-netdev
+*   napi
+*   net_cachelines/index
+*   netconsole
+*   netdev-features
+*   netdevices
+*   netfilter-sysctl
+*   netif-msg
+*   netmem
+*   nexthop-group-resilient
+*   nf_conntrack-sysctl
+*   nf_flowtable
+*   oa-tc6-framework
+*   openvswitch
+*   operstates
+*   packet_mmap
+*   phonet
+*   phy-link-topology
+*   pktgen
+*   plip
+*   ppp_generic
+*   proc_net_tcp
+*   pse-pd/index
+*   radiotap-headers
+*   rds
+*   regulatory
+*   representors
+*   rxrpc
+*   sctp
+*   secid
+*   seg6-sysctl
+*   skbuff
+*   smc-sysctl
+*   sriov
+*   statistics
+*   strparser
+*   switchdev
+*   sysfs-tagging
+*   tc-actions-env-rules
+*   tc-queue-filters
+*   tcp_ao
+*   tcp-thin
+*   team
+*   timestamping
+*   tipc
+*   tproxy
+*   tuntap
+*   udplite
+*   vrf
+*   vxlan
+*   x25
+*   x25-iface
+*   xfrm_device
+*   xfrm_proc
+*   xfrm_sync
+*   xfrm_sysctl
+*   xdp-rx-metadata
+*   xsk-tx-metadata
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_CN/networking/msg_zerocopy.rst linux-libre-6.16-gnu/Documentation/translations/zh_CN/networking/msg_zerocopy.rst
new file mode 100644
index 000000000000..821b32c4d1bf
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/translations/zh_CN/networking/msg_zerocopy.rst
@@ -0,0 +1,223 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/networking/msg_zerocopy.rst
+
+:翻译:
+
+   王亚鑫 Wang Yaxin <wang.yaxin@zte.com.cn>
+
+:校译:
+
+   - 徐鑫 xu xin <xu.xin16@zte.com.cn>
+   - 何配林 He Peilin <he.peilin@zte.com.cn>
+
+============
+MSG_ZEROCOPY
+============
+
+简介
+====
+
+MSG_ZEROCOPY 标志用于启用套接字发送调用的免拷贝功能。该功能目前适用于 TCP、UDP 和 VSOCK
+（使用 virtio 传输）套接字。
+
+机遇与注意事项
+--------------
+
+在用户进程与内核之间拷贝大型缓冲区可能会消耗大量资源。Linux 支持多种免拷贝的接口，如sendfile
+和 splice。MSG_ZEROCOPY 标志将底层的拷贝避免机制扩展到了常见的套接字发送调用中。
+
+免拷贝并非毫无代价。在实现上，它通过页面固定（page pinning）将按字节拷贝的成本替换为页面统计
+（page accounting）和完成通知的开销。因此，MSG_ZEROCOPY 通常仅在写入量超过大约 10 KB 时
+才有效。
+
+页面固定还会改变系统调用的语义。它会暂时在进程和网络堆栈之间共享缓冲区。与拷贝不同，进程在系统
+调用返回后不能立即覆盖缓冲区，否则可能会修改正在传输中的数据。内核的完整性不会受到影响，但有缺
+陷的程序可能会破坏自己的数据流。
+
+当内核返回数据可以安全修改的通知时，进程才可以修改数据。因此，将现有应用程序转换为使用
+MSG_ZEROCOPY 并非总是像简单地传递该标志那样容易。
+
+更多信息
+--------
+
+本文档的大部分内容是来自于 netdev 2.1 上发表的一篇长篇论文。如需更深入的信息，请参阅该论文和
+演讲，或者浏览 LWN.net 上的精彩报道，也可以直接阅读源码。
+
+  论文、幻灯片、视频：
+    https://netdevconf.org/2.1/session.html?debruijn
+
+  LWN 文章：
+    https://lwn.net/Articles/726917/
+
+  补丁集：
+    [PATCH net-next v4 0/9] socket sendmsg MSG_ZEROCOPY
+    https://lore.kernel.org/netdev/20170803202945.70750-1-willemdebruijn.kernel@gmail.com
+
+接口
+====
+
+传递 MSG_ZEROCOPY 标志是启用免拷贝功能的最明显步骤，但并非唯一的步骤。
+
+套接字设置
+----------
+
+当应用程序向 send 系统调用传递未定义的标志时，内核通常会宽容对待。默认情况下，它会简单地忽略
+这些标志。为了避免为那些偶然传递此标志的遗留进程启用免拷贝模式，进程必须首先通过设置套接字选项
+来表明意图：
+
+::
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &one, sizeof(one)))
+		error(1, errno, "setsockopt zerocopy");
+
+传输
+----
+
+对 send（或 sendto、sendmsg、sendmmsg）本身的改动非常简单。只需传递新的标志即可。
+
+::
+
+	ret = send(fd, buf, sizeof(buf), MSG_ZEROCOPY);
+
+如果零拷贝操作失败，将返回 -1，并设置 errno 为 ENOBUFS。这种情况可能发生在套接字超出其
+optmem 限制，或者用户超出其锁定页面的 ulimit 时。
+
+混合使用免拷贝和拷贝
+~~~~~~~~~~~~~~~~~~~~
+
+许多工作负载同时包含大型和小型缓冲区。由于对于小数据包来说，免拷贝的成本高于拷贝，因此该
+功能是通过标志实现的。带有标志的调用和没有标志的调用可以安全地混合使用。
+
+通知
+----
+
+当内核认为可以安全地重用之前传递的缓冲区时，它必须通知进程。完成通知在套接字的错误队列上
+排队，类似于传输时间戳接口。
+
+通知本身是一个简单的标量值。每个套接字都维护一个内部的无符号 32 位计数器。每次带有
+MSG_ZEROCOPY 标志的 send 调用成功发送数据时，计数器都会增加。如果调用失败或长度为零，
+则计数器不会增加。该计数器统计系统调用的调用次数，而不是字节数。在 UINT_MAX 次调用后，
+计数器会循环。
+
+通知接收
+~~~~~~~~
+
+下面的代码片段展示了 API 的使用。在最简单的情况下，每次 send 系统调用后，都会对错误队列
+进行轮询和 recvmsg 调用。
+
+从错误队列读取始终是一个非阻塞操作。poll 调用用于阻塞，直到出现错误。它会在其输出标志中
+设置 POLLERR。该标志不需要在 events 字段中设置。错误会无条件地发出信号。
+
+::
+
+	pfd.fd = fd;
+	pfd.events = 0;
+	if (poll(&pfd, 1, -1) != 1 || pfd.revents & POLLERR == 0)
+		error(1, errno, "poll");
+
+	ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+	if (ret == -1)
+		error(1, errno, "recvmsg");
+
+read_notification(msg);
+
+
+这个示例仅用于演示目的。在实际应用中，不等待通知，而是每隔几次 send 调用就进行一次非阻塞
+读取会更高效。
+
+零拷贝通知可以与其他套接字操作乱序处理。通常，拥有错误队列套接字会阻塞其他操作，直到错误
+被读取。然而，零拷贝通知具有零错误代码，因此不会阻塞 send 和 recv 调用。
+
+通知批处理
+~~~~~~~~~~~~
+
+可以使用 recvmmsg 调用来一次性读取多个未决的数据包。这通常不是必需的。在每条消息中，内核
+返回的不是一个单一的值，而是一个范围。当错误队列上有一个通知正在等待接收时，它会将连续的通
+知合并起来。
+
+当一个新的通知即将被排队时，它会检查队列尾部的通知的范围是否可以扩展以包含新的值。如果是这
+样，它会丢弃新的通知数据包，并增大未处理通知的范围上限值。
+
+对于按顺序确认数据的协议（如 TCP），每个通知都可以合并到前一个通知中，因此在任何时候在等待
+的通知都不会超过一个。
+
+有序交付是常见的情况，但不能保证。在重传和套接字拆除时，通知可能会乱序到达。
+
+通知解析
+~~~~~~~~
+
+下面的代码片段演示了如何解析控制消息：前面代码片段中的 read_notification() 调用。通知
+以标准错误格式 sock_extended_err 编码。
+
+控制数据中的级别和类型字段是协议族特定的，对于 TCP 或 UDP 套接字，分别为 IP_RECVERR 或
+IPV6_RECVERR。对于 VSOCK 套接字，cmsg_level 为 SOL_VSOCK，cmsg_type 为 VSOCK_RECVERR。
+
+错误来源是新的类型 SO_EE_ORIGIN_ZEROCOPY。如前所述，ee_errno 为零，以避免在套接字上
+阻塞地读取和写入系统调用。
+
+32 位通知范围编码为 [ee_info, ee_data]。这个范围是包含边界值的。除了下面讨论的 ee_code
+字段外，结构中的其他字段应被视为未定义的。
+
+::
+
+	struct sock_extended_err *serr;
+	struct cmsghdr *cm;
+
+	cm = CMSG_FIRSTHDR(msg);
+	if (cm->cmsg_level != SOL_IP &&
+		cm->cmsg_type != IP_RECVERR)
+		error(1, 0, "cmsg");
+
+	serr = (void *) CMSG_DATA(cm);
+	if (serr->ee_errno != 0 ||
+		serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY)
+		error(1, 0, "serr");
+
+printf("completed: %u..%u\n", serr->ee_info, serr->ee_data);
+
+
+延迟拷贝
+~~~~~~~~
+
+传递标志 MSG_ZEROCOPY 是向内核发出的一个提示，让内核采用免拷贝的策略，同时也是一种约
+定，即内核会对完成通知进行排队处理。但这并不保证拷贝操作一定会被省略。
+
+拷贝避免不总是适用的。不支持分散/聚集 I/O 的设备无法发送由内核生成的协议头加上零拷贝用户
+数据组成的数据包。数据包可能需要在协议栈底层转换为一份私有数据副本，例如用于计算校验和。
+
+在所有这些情况下，当内核释放对共享页面的持有权时，它会返回一个完成通知。该通知可能在（已
+拷贝）数据完全传输之前到达。因此。零拷贝完成通知并不是传输完成通知。
+
+如果数据不在缓存中，延迟拷贝可能会比立即在系统调用中拷贝开销更大。进程还会因通知处理而产
+生成本，但却没有带来任何好处。因此，内核会在返回时通过在 ee_code 字段中设置标志
+SO_EE_CODE_ZEROCOPY_COPIED 来指示数据是否以拷贝的方式完成。进程可以利用这个信号，在
+同一套接字上后续的请求中停止传递 MSG_ZEROCOPY 标志。
+
+实现
+====
+
+环回
+----
+
+对于 TCP 和 UDP：
+如果接收进程不读取其套接字，发送到本地套接字的数据可能会无限期排队。无限期的通知延迟是不
+可接受的。因此，所有使用 MSG_ZEROCOPY 生成并环回到本地套接字的数据包都将产生延迟拷贝。
+这包括环回到数据包套接字（例如，tcpdump）和 tun 设备。
+
+对于 VSOCK：
+发送到本地套接字的数据路径与非本地套接字相同。
+
+测试
+====
+
+更具体的示例代码可以在内核源码的 tools/testing/selftests/net/msg_zerocopy.c 中找到。
+
+要留意环回约束问题。该测试可以在一对主机之间进行。但如果是在本地的一对进程之间运行，例如当使用
+msg_zerocopy.sh 脚本在跨命名空间的虚拟以太网（veth）对之间运行时，测试将不会显示出任何性能
+提升。为了便于测试，可以通过让 skb_orphan_frags_rx 与 skb_orphan_frags 相同，来暂时放宽
+环回限制。
+
+对于 VSOCK 类型套接字的示例可以在 tools/testing/vsock/vsock_test_zerocopy.c 中找到。
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst linux-libre-6.16-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
index b25ecc44d735..80ea5677ee52 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_TW/admin-guide/bug-hunting.rst
@@ -191,7 +191,7 @@ objdump
 編行。如果沒有調試符號，您將看到所示例程的彙編程序代碼，但是如果內核有調試
 符號，C代碼也將可見（調試符號可以在內核配置菜單的hacking項中啓用）。例如::
 
-    $ objdump -r -S -l --disassemble net/dccp/ipv4.o
+    $ objdump -r -S -l --disassemble net/ipv4/tcp.o
 
 .. note::
 
diff --git linux-libre-6.15-gnu/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst linux-libre-6.16-gnu/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst
index c881e8872b19..b595af59ba78 100644
--- linux-libre-6.15-gnu/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-6.16-gnu/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst
@@ -116,35 +116,31 @@ Kgdb內核調試器、QEMU等虛擬機管理程序或基於JTAG的硬件接口
 
 - 對當前或指定的CPU使用per-cpu函數::
 
-    (gdb) p $lx_per_cpu("runqueues").nr_running
+    (gdb) p $lx_per_cpu(runqueues).nr_running
     $3 = 1
-    (gdb) p $lx_per_cpu("runqueues", 2).nr_running
+    (gdb) p $lx_per_cpu(runqueues, 2).nr_running
     $4 = 0
 
 - 使用container_of查看更多hrtimers信息::
 
-    (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
-    (gdb) p *$container_of($next, "struct hrtimer", "node")
+    (gdb) set $leftmost = $lx_per_cpu(hrtimer_bases).clock_base[0].active.rb_root.rb_leftmost
+    (gdb) p *$container_of($leftmost, "struct hrtimer", "node")
     $5 = {
       node = {
         node = {
-          __rb_parent_color = 18446612133355256072,
-          rb_right = 0x0 <irq_stack_union>,
-          rb_left = 0x0 <irq_stack_union>
+          __rb_parent_color = 18446612686384860673,
+          rb_right = 0xffff888231da8b00,
+          rb_left = 0x0
         },
-        expires = {
-          tv64 = 1835268000000
-        }
+        expires = 1228461000000
       },
-      _softexpires = {
-        tv64 = 1835268000000
-      },
-      function = 0xffffffff81078232 <tick_sched_timer>,
-      base = 0xffff88003fd0d6f0,
-      state = 1,
-      start_pid = 0,
-      start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
-      start_comm = "swapper/2\000\000\000\000\000\000"
+      _softexpires = 1228461000000,
+      function = 0xffffffff8137ab20 <tick_nohz_handler>,
+      base = 0xffff888231d9b4c0,
+      state = 1 '\001',
+      is_rel = 0 '\000',
+      is_soft = 0 '\000',
+      is_hard = 1 '\001'
     }
 
 
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst linux-libre-6.16-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
index 7a1409ecc238..bc91756bde73 100644
--- linux-libre-6.15-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ linux-libre-6.16-gnu/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -28,10 +28,10 @@ or number from the table below.  Because of the large number of drivers,
 many drivers share a partial letter with other drivers.
 
 If you are writing a driver for a new device and need a letter, pick an
-unused block with enough room for expansion: 32 to 256 ioctl commands.
-You can register the block by patching this file and submitting the
-patch to Linus Torvalds.  Or you can e-mail me at <mec@shout.net> and
-I'll register one for you.
+unused block with enough room for expansion: 32 to 256 ioctl commands
+should suffice. You can register the block by patching this file and
+submitting the patch through :doc:`usual patch submission process
+</process/submitting-patches>`.
 
 The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number
 to distinguish ioctls from each other.  The third argument to _IOW,
@@ -62,9 +62,8 @@ Following this convention is good because:
 (5) When following the convention, the driver code can use generic
     code to copy the parameters between user and kernel space.
 
-This table lists ioctls visible from user land for Linux/x86.  It contains
-most drivers up to 2.6.31, but I know I am missing some.  There has been
-no attempt to list non-X86 architectures or ioctls from drivers/staging/.
+This table lists ioctls visible from userland, excluding ones from
+drivers/staging/.
 
 ====  =====  ======================================================= ================================================================
 Code  Seq#    Include File                                           Comments
@@ -366,6 +365,12 @@ Code  Seq#    Include File                                           Comments
                                                                      <mailto:linuxppc-dev>
 0xB2  01-02  arch/powerpc/include/uapi/asm/papr-sysparm.h            powerpc/pseries system parameter API
                                                                      <mailto:linuxppc-dev>
+0xB2  03-05  arch/powerpc/include/uapi/asm/papr-indices.h            powerpc/pseries indices API
+                                                                     <mailto:linuxppc-dev>
+0xB2  06-07  arch/powerpc/include/uapi/asm/papr-platform-dump.h      powerpc/pseries Platform Dump API
+                                                                     <mailto:linuxppc-dev>
+0xB2  08     powerpc/include/uapi/asm/papr-physical-attestation.h    powerpc/pseries Physical Attestation API
+                                                                     <mailto:linuxppc-dev>
 0xB3  00     linux/mmc/ioctl.h
 0xB4  00-0F  linux/gpio.h                                            <mailto:linux-gpio@vger.kernel.org>
 0xB5  00-0F  uapi/linux/rpmsg.h                                      <mailto:linux-remoteproc@vger.kernel.org>
@@ -397,6 +402,8 @@ Code  Seq#    Include File                                           Comments
                                                                      <mailto:mathieu.desnoyers@efficios.com>
 0xF8  all    arch/x86/include/uapi/asm/amd_hsmp.h                    AMD HSMP EPYC system management interface driver
                                                                      <mailto:nchatrad@amd.com>
+0xF9  00-0F  uapi/misc/amd-apml.h		                     AMD side band system management interface driver
+                                                                     <mailto:naveenkrishna.chatradhi@amd.com>
 0xFD  all    linux/dm-ioctl.h
 0xFE  all    linux/isst_if.h
 ====  =====  ======================================================= ================================================================
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/media/v4l/meta-formats.rst linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/meta-formats.rst
index 86ffb3bc8ade..bb6876cfc271 100644
--- linux-libre-6.15-gnu/Documentation/userspace-api/media/v4l/meta-formats.rst
+++ linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/meta-formats.rst
@@ -12,6 +12,7 @@ These formats are used for the :ref:`metadata` interface only.
 .. toctree::
     :maxdepth: 1
 
+    metafmt-c3-isp
     metafmt-d4xx
     metafmt-generic
     metafmt-intel-ipu3
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst
new file mode 100644
index 000000000000..449b45c2ec24
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst
@@ -0,0 +1,86 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+
+.. _v4l2-meta-fmt-c3isp-stats:
+.. _v4l2-meta-fmt-c3isp-params:
+
+***********************************************************************
+V4L2_META_FMT_C3ISP_STATS ('C3ST'), V4L2_META_FMT_C3ISP_PARAMS ('C3PM')
+***********************************************************************
+
+.. c3_isp_stats_info
+
+3A Statistics
+=============
+
+The C3 ISP can collect different statistics over an input Bayer frame.
+Those statistics are obtained from the "c3-isp-stats" metadata capture video nodes,
+using the :c:type:`v4l2_meta_format` interface.
+They are formatted as described by the :c:type:`c3_isp_stats_info` structure.
+
+The statistics collected are  Auto-white balance,
+Auto-exposure and Auto-focus information.
+
+.. c3_isp_params_cfg
+
+Configuration Parameters
+========================
+
+The configuration parameters are passed to the c3-isp-params metadata output video node,
+using the :c:type:`v4l2_meta_format` interface. Rather than a single struct containing
+sub-structs for each configurable area of the ISP, parameters for the C3-ISP
+are defined as distinct structs or "blocks" which may be added to the data
+member of :c:type:`c3_isp_params_cfg`. Userspace is responsible for
+populating the data member with the blocks that need to be configured by the driver, but
+need not populate it with **all** the blocks, or indeed with any at all if there
+are no configuration changes to make. Populated blocks **must** be consecutive
+in the buffer. To assist both userspace and the driver in identifying the
+blocks each block-specific struct embeds
+:c:type:`c3_isp_params_block_header` as its first member and userspace
+must populate the type member with a value from
+:c:type:`c3_isp_params_block_type`. Once the blocks have been populated
+into the data buffer, the combined size of all populated blocks shall be set in
+the data_size member of :c:type:`c3_isp_params_cfg`. For example:
+
+.. code-block:: c
+
+	struct c3_isp_params_cfg *params =
+		(struct c3_isp_params_cfg *)buffer;
+
+	params->version = C3_ISP_PARAM_BUFFER_V0;
+	params->data_size = 0;
+
+	void *data = (void *)params->data;
+
+	struct c3_isp_params_awb_gains *gains =
+		(struct c3_isp_params_awb_gains *)data;
+
+	gains->header.type = C3_ISP_PARAMS_BLOCK_AWB_GAINS;
+	gains->header.flags = C3_ISP_PARAMS_BLOCK_FL_ENABLE;
+	gains->header.size = sizeof(struct c3_isp_params_awb_gains);
+
+	gains->gr_gain = 256;
+	gains->r_gain = 256;
+	gains->b_gain = 256;
+	gains->gb_gain = 256;
+
+	data += sizeof(struct c3_isp__params_awb_gains);
+	params->data_size += sizeof(struct c3_isp_params_awb_gains);
+
+	struct c3_isp_params_awb_config *awb_cfg =
+		(struct c3_isp_params_awb_config *)data;
+
+	awb_cfg->header.type = C3_ISP_PARAMS_BLOCK_AWB_CONFIG;
+	awb_cfg->header.flags = C3_ISP_PARAMS_BLOCK_FL_ENABLE;
+	awb_cfg->header.size = sizeof(struct c3_isp_params_awb_config);
+
+	awb_cfg->tap_point = C3_ISP_AWB_STATS_TAP_BEFORE_WB;
+	awb_cfg->satur = 1;
+	awb_cfg->horiz_zones_num = 32;
+	awb_cfg->vert_zones_num = 24;
+
+	params->data_size += sizeof(struct c3_isp_params_awb_config);
+
+Amlogic C3 ISP uAPI data types
+===============================
+
+.. kernel-doc:: include/uapi/linux/media/amlogic/c3-isp-config.h
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
index b788f6933855..6e4f399f1f88 100644
--- linux-libre-6.15-gnu/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
+++ linux-libre-6.16-gnu/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
@@ -137,6 +137,13 @@ All components are stored with the same number of bits per component.
       - Cb, Cr
       - No
       - Linear
+    * - V4L2_PIX_FMT_NV15
+      - 'NV15'
+      - 10
+      - 4:2:0
+      - Cb, Cr
+      - Yes
+      - Linear
     * - V4L2_PIX_FMT_NV15_4L4
       - 'VT15'
       - 15
@@ -186,6 +193,13 @@ All components are stored with the same number of bits per component.
       - Cr, Cb
       - No
       - Linear
+    * - V4L2_PIX_FMT_NV20
+      - 'NV20'
+      - 10
+      - 4:2:2
+      - Cb, Cr
+      - Yes
+      - Linear
     * - V4L2_PIX_FMT_NV24
       - 'NV24'
       - 8
@@ -302,6 +316,57 @@ of the luma plane.
       - Cr\ :sub:`11`
 
 
+.. _V4L2-PIX-FMT-NV15:
+
+NV15
+----
+
+Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components
+with no padding between each component. A group of 4 components are stored over
+5 bytes in little endian order.
+
+.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell)
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00[7:0]`
+      - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
+      - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
+      - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
+      - Y'\ :sub:`03[9:2]`
+    * - start + 5:
+      - Y'\ :sub:`10[7:0]`
+      - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
+      - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
+      - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
+      - Y'\ :sub:`13[9:2]`
+    * - start + 10:
+      - Y'\ :sub:`20[7:0]`
+      - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
+      - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
+      - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
+      - Y'\ :sub:`23[9:2]`
+    * - start + 15:
+      - Y'\ :sub:`30[7:0]`
+      - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
+      - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
+      - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
+      - Y'\ :sub:`33[9:2]`
+    * - start + 20:
+      - Cb\ :sub:`00[7:0]`
+      - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
+      - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
+      - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
+      - Cr\ :sub:`01[9:2]`
+    * - start + 25:
+      - Cb\ :sub:`10[7:0]`
+      - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
+      - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
+      - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
+      - Cr\ :sub:`11[9:2]`
+
+
 .. _V4L2-PIX-FMT-NV12MT:
 .. _V4L2-PIX-FMT-NV12MT-16X16:
 .. _V4L2-PIX-FMT-NV12-4L4:
@@ -631,6 +696,69 @@ number of lines as the luma plane.
       - Cr\ :sub:`32`
 
 
+.. _V4L2-PIX-FMT-NV20:
+
+NV20
+----
+
+Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components
+with no padding between each component. A group of 4 components are stored over
+5 bytes in little endian order.
+
+.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell)
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - start + 0:
+      - Y'\ :sub:`00[7:0]`
+      - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
+      - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
+      - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
+      - Y'\ :sub:`03[9:2]`
+    * - start + 5:
+      - Y'\ :sub:`10[7:0]`
+      - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
+      - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
+      - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
+      - Y'\ :sub:`13[9:2]`
+    * - start + 10:
+      - Y'\ :sub:`20[7:0]`
+      - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
+      - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
+      - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
+      - Y'\ :sub:`23[9:2]`
+    * - start + 15:
+      - Y'\ :sub:`30[7:0]`
+      - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
+      - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
+      - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
+      - Y'\ :sub:`33[9:2]`
+    * - start + 20:
+      - Cb\ :sub:`00[7:0]`
+      - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
+      - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
+      - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
+      - Cr\ :sub:`01[9:2]`
+    * - start + 25:
+      - Cb\ :sub:`10[7:0]`
+      - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
+      - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
+      - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
+      - Cr\ :sub:`11[9:2]`
+    * - start + 30:
+      - Cb\ :sub:`20[7:0]`
+      - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]`
+      - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]`
+      - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]`
+      - Cr\ :sub:`21[9:2]`
+    * - start + 35:
+      - Cb\ :sub:`30[7:0]`
+      - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]`
+      - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]`
+      - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]`
+      - Cr\ :sub:`31[9:2]`
+
+
 .. _V4L2-PIX-FMT-NV24:
 .. _V4L2-PIX-FMT-NV42:
 
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/mseal.rst linux-libre-6.16-gnu/Documentation/userspace-api/mseal.rst
index 7195a7f91107..ea9b11a0bd89 100644
--- linux-libre-6.15-gnu/Documentation/userspace-api/mseal.rst
+++ linux-libre-6.16-gnu/Documentation/userspace-api/mseal.rst
@@ -144,7 +144,7 @@ Use cases
   architecture.
 
   The following architectures currently support this feature: x86-64, arm64,
-  and s390.
+  loongarch and s390.
 
   WARNING: This feature breaks programs which rely on relocating
   or unmapping system mappings. Known broken software at the time
diff --git linux-libre-6.15-gnu/Documentation/userspace-api/netlink/netlink-raw.rst linux-libre-6.16-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
index 1990eea772d0..31fc91020eb3 100644
--- linux-libre-6.15-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
+++ linux-libre-6.16-gnu/Documentation/userspace-api/netlink/netlink-raw.rst
@@ -62,7 +62,7 @@ Sub-messages
 ------------
 
 Several raw netlink families such as
-:doc:`rt_link<../../networking/netlink_spec/rt_link>` and
+:doc:`rt-link<../../networking/netlink_spec/rt-link>` and
 :doc:`tc<../../networking/netlink_spec/tc>` use attribute nesting as an
 abstraction to carry module specific information.
 
diff --git linux-libre-6.15-gnu/Documentation/virt/hyperv/vmbus.rst linux-libre-6.16-gnu/Documentation/virt/hyperv/vmbus.rst
index 1dcef6a7fda3..654bb4849972 100644
--- linux-libre-6.15-gnu/Documentation/virt/hyperv/vmbus.rst
+++ linux-libre-6.16-gnu/Documentation/virt/hyperv/vmbus.rst
@@ -250,10 +250,18 @@ interrupts are not Linux IRQs, there are no entries in /proc/interrupts
 or /proc/irq corresponding to individual VMBus channel interrupts.
 
 An online CPU in a Linux guest may not be taken offline if it has
-VMBus channel interrupts assigned to it.  Any such channel
-interrupts must first be manually reassigned to another CPU as
-described above.  When no channel interrupts are assigned to the
-CPU, it can be taken offline.
+VMBus channel interrupts assigned to it. Starting in kernel v6.15,
+any such interrupts are automatically reassigned to some other CPU
+at the time of offlining. The "other" CPU is chosen by the
+implementation and is not load balanced or otherwise intelligently
+determined. If the CPU is onlined again, channel interrupts previously
+assigned to it are not moved back. As a result, after multiple CPUs
+have been offlined, and perhaps onlined again, the interrupt-to-CPU
+mapping may be scrambled and non-optimal. In such a case, optimal
+assignments must be re-established manually. For kernels v6.14 and
+earlier, any conflicting channel interrupts must first be manually
+reassigned to another CPU as described above. Then when no channel
+interrupts are assigned to the CPU, it can be taken offline.
 
 The VMBus channel interrupt handling code is designed to work
 correctly even if an interrupt is received on a CPU other than the
@@ -324,3 +332,15 @@ rescinded, neither Hyper-V nor Linux retains any state about
 its previous existence. Such a device might be re-added later,
 in which case it is treated as an entirely new device. See
 vmbus_onoffer_rescind().
+
+For some devices, such as the KVP device, Hyper-V automatically
+sends a rescind message when the primary channel is closed,
+likely as a result of unbinding the device from its driver.
+The rescind causes Linux to remove the device. But then Hyper-V
+immediately reoffers the device to the guest, causing a new
+instance of the device to be created in Linux. For other
+devices, such as the synthetic SCSI and NIC devices, closing the
+primary channel does *not* result in Hyper-V sending a rescind
+message. The device continues to exist in Linux on the VMBus,
+but with no driver bound to it. The same driver or a new driver
+can subsequently be bound to the existing instance of the device.
diff --git linux-libre-6.15-gnu/Documentation/virt/kvm/api.rst linux-libre-6.16-gnu/Documentation/virt/kvm/api.rst
index 47c7c3f92314..544fb11351d9 100644
--- linux-libre-6.15-gnu/Documentation/virt/kvm/api.rst
+++ linux-libre-6.16-gnu/Documentation/virt/kvm/api.rst
@@ -1411,6 +1411,9 @@ the memory region are automatically reflected into the guest.  For example, an
 mmap() that affects the region will be made visible immediately.  Another
 example is madvise(MADV_DROP).
 
+For TDX guest, deleting/moving memory region loses guest memory contents.
+Read only region isn't supported.  Only as-id 0 is supported.
+
 Note: On arm64, a write generated by the page-table walker (to update
 the Access and Dirty flags, for example) never results in a
 KVM_EXIT_MMIO exit when the slot has the KVM_MEM_READONLY flag. This
@@ -2005,6 +2008,13 @@ If the KVM_CAP_VM_TSC_CONTROL capability is advertised, this can also
 be used as a vm ioctl to set the initial tsc frequency of subsequently
 created vCPUs.
 
+For TSC protected Confidential Computing (CoCo) VMs where TSC frequency
+is configured once at VM scope and remains unchanged during VM's
+lifetime, the vm ioctl should be used to configure the TSC frequency
+and the vcpu ioctl is not supported.
+
+Example of such CoCo VMs: TDX guests.
+
 4.56 KVM_GET_TSC_KHZ
 --------------------
 
@@ -3460,7 +3470,8 @@ The initial values are defined as:
 	- FPSIMD/NEON registers: set to 0
 	- SVE registers: set to 0
 	- System registers: Reset to their architecturally defined
-	  values as for a warm reset to EL1 (resp. SVC)
+	  values as for a warm reset to EL1 (resp. SVC) or EL2 (in the
+	  case of EL2 being enabled).
 
 Note that because some registers reflect machine topology, all vcpus
 should be created before this ioctl is invoked.
@@ -3527,6 +3538,17 @@ Possible features:
 	      - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can
 	        no longer be written using KVM_SET_ONE_REG.
 
+	- KVM_ARM_VCPU_HAS_EL2: Enable Nested Virtualisation support,
+	  booting the guest from EL2 instead of EL1.
+	  Depends on KVM_CAP_ARM_EL2.
+	  The VM is running with HCR_EL2.E2H being RES1 (VHE) unless
+	  KVM_ARM_VCPU_HAS_EL2_E2H0 is also set.
+
+	- KVM_ARM_VCPU_HAS_EL2_E2H0: Restrict Nested Virtualisation
+	  support to HCR_EL2.E2H being RES0 (non-VHE).
+	  Depends on KVM_CAP_ARM_EL2_E2H0.
+	  KVM_ARM_VCPU_HAS_EL2 must also be set.
+
 4.83 KVM_ARM_PREFERRED_TARGET
 -----------------------------
 
@@ -4768,7 +4790,7 @@ H_GET_CPU_CHARACTERISTICS hypercall.
 
 :Capability: basic
 :Architectures: x86
-:Type: vm
+:Type: vm ioctl, vcpu ioctl
 :Parameters: an opaque platform specific structure (in/out)
 :Returns: 0 on success; -1 on error
 
@@ -4776,9 +4798,11 @@ If the platform supports creating encrypted VMs then this ioctl can be used
 for issuing platform-specific memory encryption commands to manage those
 encrypted VMs.
 
-Currently, this ioctl is used for issuing Secure Encrypted Virtualization
-(SEV) commands on AMD Processors. The SEV commands are defined in
-Documentation/virt/kvm/x86/amd-memory-encryption.rst.
+Currently, this ioctl is used for issuing both Secure Encrypted Virtualization
+(SEV) commands on AMD Processors and Trusted Domain Extensions (TDX) commands
+on Intel Processors.  The detailed commands are defined in
+Documentation/virt/kvm/x86/amd-memory-encryption.rst and
+Documentation/virt/kvm/x86/intel-tdx.rst.
 
 4.111 KVM_MEMORY_ENCRYPT_REG_REGION
 -----------------------------------
@@ -6628,7 +6652,8 @@ to the byte array.
 .. note::
 
       For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
-      KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
+      KVM_EXIT_EPR, KVM_EXIT_HYPERCALL, KVM_EXIT_TDX,
+      KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
       operations are complete (and guest state is consistent) only after userspace
       has re-entered the kernel with KVM_RUN.  The kernel side will first finish
       incomplete operations and then check for pending signals.
@@ -6827,6 +6852,7 @@ should put the acknowledged interrupt vector into the 'epr' field.
   #define KVM_SYSTEM_EVENT_WAKEUP         4
   #define KVM_SYSTEM_EVENT_SUSPEND        5
   #define KVM_SYSTEM_EVENT_SEV_TERM       6
+  #define KVM_SYSTEM_EVENT_TDX_FATAL      7
 			__u32 type;
                         __u32 ndata;
                         __u64 data[16];
@@ -6853,6 +6879,11 @@ Valid values for 'type' are:
    reset/shutdown of the VM.
  - KVM_SYSTEM_EVENT_SEV_TERM -- an AMD SEV guest requested termination.
    The guest physical address of the guest's GHCB is stored in `data[0]`.
+ - KVM_SYSTEM_EVENT_TDX_FATAL -- a TDX guest reported a fatal error state.
+   KVM doesn't do any parsing or conversion, it just dumps 16 general-purpose
+   registers to userspace, in ascending order of the 4-bit indices for x86-64
+   general-purpose registers in instruction encoding, as defined in the Intel
+   SDM.
  - KVM_SYSTEM_EVENT_WAKEUP -- the exiting vCPU is in a suspended state and
    KVM has recognized a wakeup event. Userspace may honor this event by
    marking the exiting vCPU as runnable, or deny it and call KVM_RUN again.
@@ -7151,6 +7182,69 @@ The valid value for 'flags' is:
   - KVM_NOTIFY_CONTEXT_INVALID -- the VM context is corrupted and not valid
     in VMCS. It would run into unknown result if resume the target VM.
 
+::
+
+		/* KVM_EXIT_TDX */
+		struct {
+			__u64 flags;
+			__u64 nr;
+			union {
+				struct {
+					u64 ret;
+					u64 data[5];
+				} unknown;
+				struct {
+					u64 ret;
+					u64 gpa;
+					u64 size;
+				} get_quote;
+				struct {
+					u64 ret;
+					u64 leaf;
+					u64 r11, r12, r13, r14;
+				} get_tdvmcall_info;
+				struct {
+					u64 ret;
+					u64 vector;
+				} setup_event_notify;
+			};
+		} tdx;
+
+Process a TDVMCALL from the guest.  KVM forwards select TDVMCALL based
+on the Guest-Hypervisor Communication Interface (GHCI) specification;
+KVM bridges these requests to the userspace VMM with minimal changes,
+placing the inputs in the union and copying them back to the guest
+on re-entry.
+
+Flags are currently always zero, whereas ``nr`` contains the TDVMCALL
+number from register R11.  The remaining field of the union provide the
+inputs and outputs of the TDVMCALL.  Currently the following values of
+``nr`` are defined:
+
+ * ``TDVMCALL_GET_QUOTE``: the guest has requested to generate a TD-Quote
+   signed by a service hosting TD-Quoting Enclave operating on the host.
+   Parameters and return value are in the ``get_quote`` field of the union.
+   The ``gpa`` field and ``size`` specify the guest physical address
+   (without the shared bit set) and the size of a shared-memory buffer, in
+   which the TDX guest passes a TD Report.  The ``ret`` field represents
+   the return value of the GetQuote request.  When the request has been
+   queued successfully, the TDX guest can poll the status field in the
+   shared-memory area to check whether the Quote generation is completed or
+   not. When completed, the generated Quote is returned via the same buffer.
+
+ * ``TDVMCALL_GET_TD_VM_CALL_INFO``: the guest has requested the support
+   status of TDVMCALLs.  The output values for the given leaf should be
+   placed in fields from ``r11`` to ``r14`` of the ``get_tdvmcall_info``
+   field of the union.
+
+ * ``TDVMCALL_SETUP_EVENT_NOTIFY_INTERRUPT``: the guest has requested to
+   set up a notification interrupt for vector ``vector``.
+
+KVM may add support for more values in the future that may cause a userspace
+exit, even without calls to ``KVM_ENABLE_CAP`` or similar.  In this case,
+it will enter with output fields already valid; in the common case, the
+``unknown.ret`` field of the union will be ``TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED``.
+Userspace need not do anything if it does not wish to support a TDVMCALL.
 ::
 
 		/* Fix the size of the union. */
@@ -7978,6 +8072,11 @@ apply some other policy-based mitigation. When exiting to userspace, KVM sets
 KVM_RUN_X86_BUS_LOCK in vcpu-run->flags, and conditionally sets the exit_reason
 to KVM_EXIT_X86_BUS_LOCK.
 
+Due to differences in the underlying hardware implementation, the vCPU's RIP at
+the time of exit diverges between Intel and AMD.  On Intel hosts, RIP points at
+the next instruction, i.e. the exit is trap-like.  On AMD hosts, RIP points at
+the offending instruction, i.e. the exit is fault-like.
+
 Note! Detected bus locks may be coincident with other exits to userspace, i.e.
 KVM_RUN_X86_BUS_LOCK should be checked regardless of the primary exit reason if
 userspace wants to take action on all detected bus locks.
@@ -8194,6 +8293,28 @@ KVM_X86_QUIRK_STUFF_FEATURE_MSRS    By default, at vCPU creation, KVM sets the
                                     and 0x489), as KVM does now allow them to
                                     be set by userspace (KVM sets them based on
                                     guest CPUID, for safety purposes).
+
+KVM_X86_QUIRK_IGNORE_GUEST_PAT      By default, on Intel platforms, KVM ignores
+                                    guest PAT and forces the effective memory
+                                    type to WB in EPT.  The quirk is not available
+                                    on Intel platforms which are incapable of
+                                    safely honoring guest PAT (i.e., without CPU
+                                    self-snoop, KVM always ignores guest PAT and
+                                    forces effective memory type to WB).  It is
+                                    also ignored on AMD platforms or, on Intel,
+                                    when a VM has non-coherent DMA devices
+                                    assigned; KVM always honors guest PAT in
+                                    such case. The quirk is needed to avoid
+                                    slowdowns on certain Intel Xeon platforms
+                                    (e.g. ICX, SPR) where self-snoop feature is
+                                    supported but UC is slow enough to cause
+                                    issues with some older guests that use
+                                    UC instead of WC to map the video RAM.
+                                    Userspace can disable the quirk to honor
+                                    guest PAT if it knows that there is no such
+                                    guest software, for example if it does not
+                                    expose a bochs graphics device (which is
+                                    known to have had a buggy driver).
 =================================== ============================================
 
 7.32 KVM_CAP_MAX_VCPU_ID
@@ -8496,6 +8617,17 @@ aforementioned registers before the first KVM_RUN. These registers are VM
 scoped, meaning that the same set of values are presented on all vCPUs in a
 given VM.
 
+7.43 KVM_CAP_RISCV_MP_STATE_RESET
+---------------------------------
+
+:Architectures: riscv
+:Type: VM
+:Parameters: None
+:Returns: 0 on success, -EINVAL if arg[0] is not zero
+
+When this capability is enabled, KVM resets the VCPU when setting
+MP_STATE_INIT_RECEIVED through IOCTL.  The original MP_STATE is preserved.
+
 8. Other capabilities.
 ======================
 
diff --git linux-libre-6.15-gnu/Documentation/virt/kvm/devices/vcpu.rst linux-libre-6.16-gnu/Documentation/virt/kvm/devices/vcpu.rst
index 31a9576c07af..60bf205cb373 100644
--- linux-libre-6.15-gnu/Documentation/virt/kvm/devices/vcpu.rst
+++ linux-libre-6.16-gnu/Documentation/virt/kvm/devices/vcpu.rst
@@ -137,6 +137,30 @@ exit_reason = KVM_EXIT_FAIL_ENTRY and populate the fail_entry struct by setting
 hardare_entry_failure_reason field to KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED and
 the cpu field to the processor id.
 
+1.5 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS
+--------------------------------------------------
+
+:Parameters: in kvm_device_attr.addr the address to an unsigned int
+	     representing the maximum value taken by PMCR_EL0.N
+
+:Returns:
+
+	 =======  ====================================================
+	 -EBUSY   PMUv3 already initialized, a VCPU has already run or
+                  an event filter has already been set
+	 -EFAULT  Error accessing the value pointed to by addr
+	 -ENODEV  PMUv3 not supported or GIC not initialized
+	 -EINVAL  No PMUv3 explicitly selected, or value of N out of
+	 	  range
+	 =======  ====================================================
+
+Set the number of implemented event counters in the virtual PMU. This
+mandates that a PMU has explicitly been selected via
+KVM_ARM_VCPU_PMU_V3_SET_PMU, and will fail when no PMU has been
+explicitly selected, or the number of counters is out of range for the
+selected PMU. Selecting a new PMU cancels the effect of setting this
+attribute.
+
 2. GROUP: KVM_ARM_VCPU_TIMER_CTRL
 =================================
 
diff --git linux-libre-6.15-gnu/Documentation/virt/kvm/review-checklist.rst linux-libre-6.16-gnu/Documentation/virt/kvm/review-checklist.rst
index dc01aea4057b..debac54e14e7 100644
--- linux-libre-6.15-gnu/Documentation/virt/kvm/review-checklist.rst
+++ linux-libre-6.16-gnu/Documentation/virt/kvm/review-checklist.rst
@@ -7,7 +7,7 @@ Review checklist for kvm patches
 1.  The patch must follow Documentation/process/coding-style.rst and
     Documentation/process/submitting-patches.rst.
 
-2.  Patches should be against kvm.git master branch.
+2.  Patches should be against kvm.git master or next branches.
 
 3.  If the patch introduces or modifies a new userspace API:
     - the API must be documented in Documentation/virt/kvm/api.rst
@@ -18,10 +18,10 @@ Review checklist for kvm patches
 5.  New features must default to off (userspace should explicitly request them).
     Performance improvements can and should default to on.
 
-6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2,
+    or its equivalent for non-x86 architectures
 
-7.  Emulator changes should be accompanied by unit tests for qemu-kvm.git
-    kvm/test directory.
+7.  The feature should be testable (see below).
 
 8.  Changes should be vendor neutral when possible.  Changes to common code
     are better than duplicating changes to vendor code.
@@ -36,6 +36,87 @@ Review checklist for kvm patches
 11. New guest visible features must either be documented in a hardware manual
     or be accompanied by documentation.
 
-12. Features must be robust against reset and kexec - for example, shared
-    host/guest memory must be unshared to prevent the host from writing to
-    guest memory that the guest has not reserved for this purpose.
+Testing of KVM code
+-------------------
+
+All features contributed to KVM, and in many cases bugfixes too, should be
+accompanied by some kind of tests and/or enablement in open source guests
+and VMMs.  KVM is covered by multiple test suites:
+
+*Selftests*
+  These are low level tests that allow granular testing of kernel APIs.
+  This includes API failure scenarios, invoking APIs after specific
+  guest instructions, and testing multiple calls to ``KVM_CREATE_VM``
+  within a single test.  They are included in the kernel tree at
+  ``tools/testing/selftests/kvm``.
+
+``kvm-unit-tests``
+  A collection of small guests that test CPU and emulated device features
+  from a guest's perspective.  They run under QEMU or ``kvmtool``, and
+  are generally not KVM-specific: they can be run with any accelerator
+  that QEMU support or even on bare metal, making it possible to compare
+  behavior across hypervisors and processor families.
+
+Functional test suites
+  Various sets of functional tests exist, such as QEMU's ``tests/functional``
+  suite and `avocado-vt <https://avocado-vt.readthedocs.io/en/latest/>`__.
+  These typically involve running a full operating system in a virtual
+  machine.
+
+The best testing approach depends on the feature's complexity and
+operation. Here are some examples and guidelines:
+
+New instructions (no new registers or APIs)
+  The corresponding CPU features (if applicable) should be made available
+  in QEMU.  If the instructions require emulation support or other code in
+  KVM, it is worth adding coverage to ``kvm-unit-tests`` or selftests;
+  the latter can be a better choice if the instructions relate to an API
+  that already has good selftest coverage.
+
+New hardware features (new registers, no new APIs)
+  These should be tested via ``kvm-unit-tests``; this more or less implies
+  supporting them in QEMU and/or ``kvmtool``.  In some cases selftests
+  can be used instead, similar to the previous case, or specifically to
+  test corner cases in guest state save/restore.
+
+Bug fixes and performance improvements
+  These usually do not introduce new APIs, but it's worth sharing
+  any benchmarks and tests that will validate your contribution,
+  ideally in the form of regression tests.  Tests and benchmarks
+  can be included in either ``kvm-unit-tests`` or selftests, depending
+  on the specifics of your change.  Selftests are especially useful for
+  regression tests because they are included directly in Linux's tree.
+
+Large scale internal changes
+  While it's difficult to provide a single policy, you should ensure that
+  the changed code is covered by either ``kvm-unit-tests`` or selftests.
+  In some cases the affected code is run for any guests and functional
+  tests suffice.  Explain your testing process in the cover letter,
+  as that can help identify gaps in existing test suites.
+
+New APIs
+  It is important to demonstrate your use case.  This can be as simple as
+  explaining that the feature is already in use on bare metal, or it can be
+  a proof-of-concept implementation in userspace.  The latter need not be
+  open source, though that is of course preferrable for easier testing.
+  Selftests should test corner cases of the APIs, and should also cover
+  basic host and guest operation if no open source VMM uses the feature.
+
+Bigger features, usually spanning host and guest
+  These should be supported by Linux guests, with limited exceptions for
+  Hyper-V features that are testable on Windows guests.  It is strongly
+  suggested that the feature be usable with an open source host VMM, such
+  as at least one of QEMU or crosvm, and guest firmware.  Selftests should
+  test at least API error cases.  Guest operation can be covered by
+  either selftests of ``kvm-unit-tests`` (this is especially important for
+  paravirtualized and Windows-only features).  Strong selftest coverage
+  can also be a replacement for implementation in an open source VMM,
+  but this is generally not recommended.
+
+Following the above suggestions for testing in selftests and
+``kvm-unit-tests`` will make it easier for the maintainers to review
+and accept your code.  In fact, even before you contribute your changes
+upstream it will make it easier for you to develop for KVM.
+
+Of course, the KVM maintainers reserve the right to require more tests,
+though they may also waive the requirement from time to time.
diff --git linux-libre-6.15-gnu/Documentation/virt/kvm/x86/index.rst linux-libre-6.16-gnu/Documentation/virt/kvm/x86/index.rst
index 9ece6b8dc817..851e99174762 100644
--- linux-libre-6.15-gnu/Documentation/virt/kvm/x86/index.rst
+++ linux-libre-6.16-gnu/Documentation/virt/kvm/x86/index.rst
@@ -11,6 +11,7 @@ KVM for x86 systems
    cpuid
    errata
    hypercalls
+   intel-tdx
    mmu
    msr
    nested-vmx
diff --git linux-libre-6.15-gnu/Documentation/virt/kvm/x86/intel-tdx.rst linux-libre-6.16-gnu/Documentation/virt/kvm/x86/intel-tdx.rst
new file mode 100644
index 000000000000..5efac62c92c7
--- /dev/null
+++ linux-libre-6.16-gnu/Documentation/virt/kvm/x86/intel-tdx.rst
@@ -0,0 +1,268 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Intel Trust Domain Extensions (TDX)
+===================================
+
+Overview
+========
+Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from the
+host and physical attacks.  A CPU-attested software module called 'the TDX
+module' runs inside a new CPU isolated range to provide the functionalities to
+manage and run protected VMs, a.k.a, TDX guests or TDs.
+
+Please refer to [1] for the whitepaper, specifications and other resources.
+
+This documentation describes TDX-specific KVM ABIs.  The TDX module needs to be
+initialized before it can be used by KVM to run any TDX guests.  The host
+core-kernel provides the support of initializing the TDX module, which is
+described in the Documentation/arch/x86/tdx.rst.
+
+API description
+===============
+
+KVM_MEMORY_ENCRYPT_OP
+---------------------
+:Type: vm ioctl, vcpu ioctl
+
+For TDX operations, KVM_MEMORY_ENCRYPT_OP is re-purposed to be generic
+ioctl with TDX specific sub-ioctl() commands.
+
+::
+
+  /* Trust Domain Extensions sub-ioctl() commands. */
+  enum kvm_tdx_cmd_id {
+          KVM_TDX_CAPABILITIES = 0,
+          KVM_TDX_INIT_VM,
+          KVM_TDX_INIT_VCPU,
+          KVM_TDX_INIT_MEM_REGION,
+          KVM_TDX_FINALIZE_VM,
+          KVM_TDX_GET_CPUID,
+
+          KVM_TDX_CMD_NR_MAX,
+  };
+
+  struct kvm_tdx_cmd {
+        /* enum kvm_tdx_cmd_id */
+        __u32 id;
+        /* flags for sub-command. If sub-command doesn't use this, set zero. */
+        __u32 flags;
+        /*
+         * data for each sub-command. An immediate or a pointer to the actual
+         * data in process virtual address.  If sub-command doesn't use it,
+         * set zero.
+         */
+        __u64 data;
+        /*
+         * Auxiliary error code.  The sub-command may return TDX SEAMCALL
+         * status code in addition to -Exxx.
+         */
+        __u64 hw_error;
+  };
+
+KVM_TDX_CAPABILITIES
+--------------------
+:Type: vm ioctl
+:Returns: 0 on success, <0 on error
+
+Return the TDX capabilities that current KVM supports with the specific TDX
+module loaded in the system.  It reports what features/capabilities are allowed
+to be configured to the TDX guest.
+
+- id: KVM_TDX_CAPABILITIES
+- flags: must be 0
+- data: pointer to struct kvm_tdx_capabilities
+- hw_error: must be 0
+
+::
+
+  struct kvm_tdx_capabilities {
+        __u64 supported_attrs;
+        __u64 supported_xfam;
+
+        /* TDG.VP.VMCALL hypercalls executed in kernel and forwarded to
+         * userspace, respectively
+         */
+        __u64 kernel_tdvmcallinfo_1_r11;
+        __u64 user_tdvmcallinfo_1_r11;
+
+        /* TDG.VP.VMCALL instruction executions subfunctions executed in kernel
+         * and forwarded to userspace, respectively
+         */
+        __u64 kernel_tdvmcallinfo_1_r12;
+        __u64 user_tdvmcallinfo_1_r12;
+
+        __u64 reserved[250];
+
+        /* Configurable CPUID bits for userspace */
+        struct kvm_cpuid2 cpuid;
+  };
+
+
+KVM_TDX_INIT_VM
+---------------
+:Type: vm ioctl
+:Returns: 0 on success, <0 on error
+
+Perform TDX specific VM initialization.  This needs to be called after
+KVM_CREATE_VM and before creating any VCPUs.
+
+- id: KVM_TDX_INIT_VM
+- flags: must be 0
+- data: pointer to struct kvm_tdx_init_vm
+- hw_error: must be 0
+
+::
+
+  struct kvm_tdx_init_vm {
+          __u64 attributes;
+          __u64 xfam;
+          __u64 mrconfigid[6];          /* sha384 digest */
+          __u64 mrowner[6];             /* sha384 digest */
+          __u64 mrownerconfig[6];       /* sha384 digest */
+
+          /* The total space for TD_PARAMS before the CPUIDs is 256 bytes */
+          __u64 reserved[12];
+
+        /*
+         * Call KVM_TDX_INIT_VM before vcpu creation, thus before
+         * KVM_SET_CPUID2.
+         * This configuration supersedes KVM_SET_CPUID2s for VCPUs because the
+         * TDX module directly virtualizes those CPUIDs without VMM.  The user
+         * space VMM, e.g. qemu, should make KVM_SET_CPUID2 consistent with
+         * those values.  If it doesn't, KVM may have wrong idea of vCPUIDs of
+         * the guest, and KVM may wrongly emulate CPUIDs or MSRs that the TDX
+         * module doesn't virtualize.
+         */
+          struct kvm_cpuid2 cpuid;
+  };
+
+
+KVM_TDX_INIT_VCPU
+-----------------
+:Type: vcpu ioctl
+:Returns: 0 on success, <0 on error
+
+Perform TDX specific VCPU initialization.
+
+- id: KVM_TDX_INIT_VCPU
+- flags: must be 0
+- data: initial value of the guest TD VCPU RCX
+- hw_error: must be 0
+
+KVM_TDX_INIT_MEM_REGION
+-----------------------
+:Type: vcpu ioctl
+:Returns: 0 on success, <0 on error
+
+Initialize @nr_pages TDX guest private memory starting from @gpa with userspace
+provided data from @source_addr.
+
+Note, before calling this sub command, memory attribute of the range
+[gpa, gpa + nr_pages] needs to be private.  Userspace can use
+KVM_SET_MEMORY_ATTRIBUTES to set the attribute.
+
+If KVM_TDX_MEASURE_MEMORY_REGION flag is specified, it also extends measurement.
+
+- id: KVM_TDX_INIT_MEM_REGION
+- flags: currently only KVM_TDX_MEASURE_MEMORY_REGION is defined
+- data: pointer to struct kvm_tdx_init_mem_region
+- hw_error: must be 0
+
+::
+
+  #define KVM_TDX_MEASURE_MEMORY_REGION   (1UL << 0)
+
+  struct kvm_tdx_init_mem_region {
+          __u64 source_addr;
+          __u64 gpa;
+          __u64 nr_pages;
+  };
+
+
+KVM_TDX_FINALIZE_VM
+-------------------
+:Type: vm ioctl
+:Returns: 0 on success, <0 on error
+
+Complete measurement of the initial TD contents and mark it ready to run.
+
+- id: KVM_TDX_FINALIZE_VM
+- flags: must be 0
+- data: must be 0
+- hw_error: must be 0
+
+
+KVM_TDX_GET_CPUID
+-----------------
+:Type: vcpu ioctl
+:Returns: 0 on success, <0 on error
+
+Get the CPUID values that the TDX module virtualizes for the TD guest.
+When it returns -E2BIG, the user space should allocate a larger buffer and
+retry. The minimum buffer size is updated in the nent field of the
+struct kvm_cpuid2.
+
+- id: KVM_TDX_GET_CPUID
+- flags: must be 0
+- data: pointer to struct kvm_cpuid2 (in/out)
+- hw_error: must be 0 (out)
+
+::
+
+  struct kvm_cpuid2 {
+	  __u32 nent;
+	  __u32 padding;
+	  struct kvm_cpuid_entry2 entries[0];
+  };
+
+  struct kvm_cpuid_entry2 {
+	  __u32 function;
+	  __u32 index;
+	  __u32 flags;
+	  __u32 eax;
+	  __u32 ebx;
+	  __u32 ecx;
+	  __u32 edx;
+	  __u32 padding[3];
+  };
+
+KVM TDX creation flow
+=====================
+In addition to the standard KVM flow, new TDX ioctls need to be called.  The
+control flow is as follows:
+
+#. Check system wide capability
+
+   * KVM_CAP_VM_TYPES: Check if VM type is supported and if KVM_X86_TDX_VM
+     is supported.
+
+#. Create VM
+
+   * KVM_CREATE_VM
+   * KVM_TDX_CAPABILITIES: Query TDX capabilities for creating TDX guests.
+   * KVM_CHECK_EXTENSION(KVM_CAP_MAX_VCPUS): Query maximum VCPUs the TD can
+     support at VM level (TDX has its own limitation on this).
+   * KVM_SET_TSC_KHZ: Configure TD's TSC frequency if a different TSC frequency
+     than host is desired.  This is Optional.
+   * KVM_TDX_INIT_VM: Pass TDX specific VM parameters.
+
+#. Create VCPU
+
+   * KVM_CREATE_VCPU
+   * KVM_TDX_INIT_VCPU: Pass TDX specific VCPU parameters.
+   * KVM_SET_CPUID2: Configure TD's CPUIDs.
+   * KVM_SET_MSRS: Configure TD's MSRs.
+
+#. Initialize initial guest memory
+
+   * Prepare content of initial guest memory.
+   * KVM_TDX_INIT_MEM_REGION: Add initial guest memory.
+   * KVM_TDX_FINALIZE_VM: Finalize the measurement of the TDX guest.
+
+#. Run VCPU
+
+References
+==========
+
+https://www.intel.com/content/www/us/en/developer/tools/trust-domain-extensions/documentation.html
diff --git linux-libre-6.15-gnu/Documentation/virt/uml/user_mode_linux_howto_v2.rst linux-libre-6.16-gnu/Documentation/virt/uml/user_mode_linux_howto_v2.rst
index 584000b743f3..c37e8e594d12 100644
--- linux-libre-6.15-gnu/Documentation/virt/uml/user_mode_linux_howto_v2.rst
+++ linux-libre-6.16-gnu/Documentation/virt/uml/user_mode_linux_howto_v2.rst
@@ -147,18 +147,12 @@ The image hostname will be set to the same as the host on which you
 are creating its image. It is a good idea to change that to avoid
 "Oh, bummer, I rebooted the wrong machine".
 
-UML supports two classes of network devices - the older uml_net ones
-which are scheduled for obsoletion. These are called ethX. It also
-supports the newer vector IO devices which are significantly faster
-and have support for some standard virtual network encapsulations like
-Ethernet over GRE and Ethernet over L2TPv3. These are called vec0.
+UML supports vector I/O high performance network devices which have
+support for some standard virtual network encapsulations like
+Ethernet over GRE and Ethernet over L2TPv3. These are called vecX.
 
-Depending on which one is in use, ``/etc/network/interfaces`` will
-need entries like::
-
-   # legacy UML network devices
-   auto eth0
-   iface eth0 inet dhcp
+When vector network devices are in use, ``/etc/network/interfaces``
+will need entries like::
 
    # vector UML network devices
    auto vec0
@@ -219,16 +213,6 @@ remote UML and other VM instances.
 +-----------+--------+------------------------------------+------------+
 | vde       | vector | dep. on VDE VPN: Virt.Net Locator  | varies     |
 +-----------+--------+------------------------------------+------------+
-| tuntap    | legacy | none                               | ~ 500Mbit  |
-+-----------+--------+------------------------------------+------------+
-| daemon    | legacy | none                               | ~ 450Mbit  |
-+-----------+--------+------------------------------------+------------+
-| socket    | legacy | none                               | ~ 450Mbit  |
-+-----------+--------+------------------------------------+------------+
-| ethertap  | legacy | obsolete                           | ~ 500Mbit  |
-+-----------+--------+------------------------------------+------------+
-| vde       | legacy | obsolete                           | ~ 500Mbit  |
-+-----------+--------+------------------------------------+------------+
 
 * All transports which have tso and checksum offloads can deliver speeds
   approaching 10G on TCP streams.
@@ -236,27 +220,16 @@ remote UML and other VM instances.
 * All transports which have multi-packet rx and/or tx can deliver pps
   rates of up to 1Mps or more.
 
-* All legacy transports are generally limited to ~600-700MBit and 0.05Mps.
-
 * GRE and L2TPv3 allow connections to all of: local machine, remote
   machines, remote network devices and remote UML instances.
 
-* Socket allows connections only between UML instances.
-
-* Daemon and bess require running a local switch. This switch may be
-  connected to the host as well.
-
 
 Network configuration privileges
 ================================
 
 The majority of the supported networking modes need ``root`` privileges.
-For example, in the legacy tuntap networking mode, users were required
-to be part of the group associated with the tunnel device.
-
-For newer network drivers like the vector transports, ``root`` privilege
-is required to fire an ioctl to setup the tun interface and/or use
-raw sockets where needed.
+For example, for vector transports, ``root`` privilege is required to fire
+an ioctl to setup the tun interface and/or use raw sockets where needed.
 
 This can be achieved by granting the user a particular capability instead
 of running UML as root.  In case of vector transport, a user can add the
@@ -610,12 +583,6 @@ connect to a local area cloud (all the UML nodes using the same
 multicast address running on hosts in the same multicast domain (LAN)
 will be automagically connected together to a virtual LAN.
 
-Configuring Legacy transports
-=============================
-
-Legacy transports are now considered obsolete. Please use the vector
-versions.
-
 ***********
 Running UML
 ***********
diff --git linux-libre-6.15-gnu/Documentation/wmi/acpi-interface.rst linux-libre-6.16-gnu/Documentation/wmi/acpi-interface.rst
index f1b28835d23c..1ef003b033bf 100644
--- linux-libre-6.15-gnu/Documentation/wmi/acpi-interface.rst
+++ linux-libre-6.16-gnu/Documentation/wmi/acpi-interface.rst
@@ -36,7 +36,7 @@ Offset  Size (in bytes) Content
 
 The WMI object flags control whether the method or notification ID is used:
 
-- 0x1: Data block usage is expensive and must be explicitly enabled/disabled.
+- 0x1: Data block is expensive to collect.
 - 0x2: Data block contains WMI methods.
 - 0x4: Data block contains ASCIZ string.
 - 0x8: Data block describes a WMI event, use notification ID instead
@@ -83,14 +83,18 @@ event as hexadecimal value. Their first parameter is an integer with a value
 of 0 if the WMI event should be disabled, other values will enable
 the WMI event.
 
+Those ACPI methods are always called even for WMI events not registered as
+being expensive to collect to match the behavior of the Windows driver.
+
 WCxx ACPI methods
 -----------------
-Similar to the ``WExx`` ACPI methods, except that it controls data collection
-instead of events and thus the last two characters of the ACPI method name are
-the method ID of the data block to enable/disable.
+Similar to the ``WExx`` ACPI methods, except that instead of WMI events it controls
+data collection of data blocks registered as being expensive to collect. Thus the
+last two characters of the ACPI method name are the method ID of the data block
+to enable/disable.
 
 Those ACPI methods are also called before setting data blocks to match the
-behaviour of the Windows driver.
+behavior of the Windows driver.
 
 _WED ACPI method
 ----------------
diff --git linux-libre-6.15-gnu/Documentation/wmi/devices/alienware-wmi.rst linux-libre-6.16-gnu/Documentation/wmi/devices/alienware-wmi.rst
index ddc5e561960e..1d9d43e2e314 100644
--- linux-libre-6.15-gnu/Documentation/wmi/devices/alienware-wmi.rst
+++ linux-libre-6.16-gnu/Documentation/wmi/devices/alienware-wmi.rst
@@ -11,7 +11,7 @@ The WMI device WMAX has been implemented for many Alienware and Dell's G-Series
 models. Throughout these models, two implementations have been identified. The
 first one, used by older systems, deals with HDMI, brightness, RGB, amplifier
 and deep sleep control. The second one used by newer systems deals primarily
-with thermal, overclocking, and GPIO control.
+with thermal control and overclocking.
 
 It is suspected that the latter is used by Alienware Command Center (AWCC) to
 manage manufacturer predefined thermal profiles. The alienware-wmi driver
@@ -69,9 +69,6 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility:
    [WmiMethodId(164), Implemented, read, write, Description("Tobii Camera Power Off.")] void TobiiCameraPowerOff([out] uint32 argr);
  };
 
-Some of these methods get quite intricate so we will describe them using
-pseudo-code that vaguely resembles the original ASL code.
-
 Methods not described in the following document have unknown behavior.
 
 Argument Structure
@@ -87,175 +84,133 @@ ID 0xA0, the argument you would pass to the method is 0xA001.
 Thermal Methods
 ===============
 
-WMI method Thermal_Information([in] uint32 arg2, [out] uint32 argr)
--------------------------------------------------------------------
-
-::
-
- if BYTE_0(arg2) == 0x01:
-         argr = 1
-
- if BYTE_0(arg2) == 0x02:
-         argr = SYSTEM_DESCRIPTION
-
- if BYTE_0(arg2) == 0x03:
-         if BYTE_1(arg2) == 0x00:
-                 argr = FAN_ID_0
-
-         if BYTE_1(arg2) == 0x01:
-                 argr = FAN_ID_1
-
-         if BYTE_1(arg2) == 0x02:
-                 argr = FAN_ID_2
-
-         if BYTE_1(arg2) == 0x03:
-                 argr = FAN_ID_3
-
-         if BYTE_1(arg2) == 0x04:
-                 argr = SENSOR_ID_CPU | 0x0100
-
-         if BYTE_1(arg2) == 0x05:
-                 argr = SENSOR_ID_GPU | 0x0100
-
-         if BYTE_1(arg2) == 0x06:
-                 argr = THERMAL_MODE_QUIET_ID
-
-         if BYTE_1(arg2) == 0x07:
-                 argr = THERMAL_MODE_BALANCED_ID
-
-         if BYTE_1(arg2) == 0x08:
-                 argr = THERMAL_MODE_BALANCED_PERFORMANCE_ID
-
-         if BYTE_1(arg2) == 0x09:
-                 argr = THERMAL_MODE_PERFORMANCE_ID
-
-         if BYTE_1(arg2) == 0x0A:
-                 argr = THERMAL_MODE_LOW_POWER_ID
-
-         if BYTE_1(arg2) == 0x0B:
-                 argr = THERMAL_MODE_GMODE_ID
-
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x04:
-         if is_valid_sensor(BYTE_1(arg2)):
-                 argr = SENSOR_TEMP_C
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x05:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_RPM()
-
- if BYTE_0(arg2) == 0x06:
-         skip
-
- if BYTE_0(arg2) == 0x07:
-         argr = 0
-
- If BYTE_0(arg2) == 0x08:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = 0
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x09:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_UNKNOWN_STAT_0()
-
-         else:
-                 argr = 0xFFFFFFFF
-
- if BYTE_0(arg2) == 0x0A:
-         argr = THERMAL_MODE_BALANCED_ID
-
- if BYTE_0(arg2) == 0x0B:
-         argr = CURRENT_THERMAL_MODE()
-
- if BYTE_0(arg2) == 0x0C:
-         if is_valid_fan(BYTE_1(arg2)):
-                 argr = FAN_UNKNOWN_STAT_1()
-         else:
-                 argr = 0xFFFFFFFF
-
-Operation 0x02 returns a *system description* buffer with the following
-structure:
-
-::
-
- out[0] -> Number of fans
- out[1] -> Number of sensors
- out[2] -> 0x00
- out[3] -> Number of thermal modes
+WMI method GetFanSensors([in] uint32 arg2, [out] uint32 argr)
+-------------------------------------------------------------
 
-Operation 0x03 list all available fan IDs, sensor IDs and thermal profile
-codes in order, but different models may have different number of fans and
-thermal profiles. These are the known ranges:
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Get the number of temperature      | - Byte 1: Fan ID   |
+|                    | sensors related with a fan ID      |                    |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get the temperature sensor IDs     | - Byte 1: Fan ID   |
+|                    | related to a fan sensor ID         | - Byte 2: Index    |
++--------------------+------------------------------------+--------------------+
 
-* Fan IDs: from 2 up to 4
-* Sensor IDs: 2
-* Thermal profile codes: from 1 up to 7
+WMI method Thermal_Information([in] uint32 arg2, [out] uint32 argr)
+-------------------------------------------------------------------
 
-In total BYTE_1(ARG2) may range from 0x5 up to 0xD depending on the model.
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Unknown.                           | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get system description number with | - None             |
+|                    | the following structure:           |                    |
+|                    |                                    |                    |
+|                    | - Byte 0: Number of fans           |                    |
+|                    | - Byte 1: Number of temperature    |                    |
+|                    |   sensors                          |                    |
+|                    | - Byte 2: Unknown                  |                    |
+|                    | - Byte 3: Number of thermal        |                    |
+|                    |   profiles                         |                    |
++--------------------+------------------------------------+--------------------+
+| 0x03               | List an ID or resource at a given  | - Byte 1: Index    |
+|                    | index. Fan IDs, temperature IDs,   |                    |
+|                    | unknown IDs and thermal profile    |                    |
+|                    | IDs are listed in that exact       |                    |
+|                    | order.                             |                    |
+|                    |                                    |                    |
+|                    | Operation 0x02 is used to know     |                    |
+|                    | which indexes map to which         |                    |
+|                    | resources.                         |                    |
+|                    |                                    |                    |
+|                    | **Returns:** ID at a given index   |                    |
++--------------------+------------------------------------+--------------------+
+| 0x04               | Get the current temperature for a  | - Byte 1: Sensor   |
+|                    | given temperature sensor.          |   ID               |
++--------------------+------------------------------------+--------------------+
+| 0x05               | Get the current RPM for a given    | - Byte 1: Fan ID   |
+|                    | fan.                               |                    |
++--------------------+------------------------------------+--------------------+
+| 0x06               | Get fan speed percentage. (not     | - Byte 1: Fan ID   |
+|                    | implemented in every model)        |                    |
++--------------------+------------------------------------+--------------------+
+| 0x07               | Unknown.                           | - Unknown          |
++--------------------+------------------------------------+--------------------+
+| 0x08               | Get minimum RPM for a given FAN    | - Byte 1: Fan ID   |
+|                    | ID.                                |                    |
++--------------------+------------------------------------+--------------------+
+| 0x09               | Get maximum RPM for a given FAN    | - Byte 1: Fan ID   |
+|                    | ID.                                |                    |
++--------------------+------------------------------------+--------------------+
+| 0x0A               | Get balanced thermal profile ID.   | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x0B               | Get current thermal profile ID.    | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x0C               | Get current `boost` value for a    | - Byte 1: Fan ID   |
+|                    | given fan ID.                      |                    |
++--------------------+------------------------------------+--------------------+
 
 WMI method Thermal_Control([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0x01:
-         if is_valid_thermal_profile(BYTE_1(arg2)):
-                 SET_THERMAL_PROFILE(BYTE_1(arg2))
-                 argr = 0
-
- if BYTE_0(arg2) == 0x02:
-         if is_valid_fan(BYTE_1(arg2)):
-                 SET_FAN_SPEED_MULTIPLIER(BYTE_2(arg2))
-                 argr = 0
-         else:
-                 argr = 0xFFFFFFFF
-
-.. note::
-   While you can manually change the fan speed multiplier with this method,
-   Dell's BIOS tends to overwrite this changes anyway.
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Activate a given thermal profile.  | - Byte 1: Thermal  |
+|                    |                                    |   profile ID       |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Set a `boost` value for a given    | - Byte 1: Fan ID   |
+|                    | fan ID.                            | - Byte 2: Boost    |
++--------------------+------------------------------------+--------------------+
 
 These are the known thermal profile codes:
 
-::
-
- CUSTOM                         0x00
-
- BALANCED_USTT                  0xA0
- BALANCED_PERFORMANCE_USTT      0xA1
- COOL_USTT                      0xA2
- QUIET_USTT                     0xA3
- PERFORMANCE_USTT               0xA4
- LOW_POWER_USTT                 0xA5
-
- QUIET                          0x96
- BALANCED                       0x97
- BALANCED_PERFORMANCE           0x98
- PERFORMANCE                    0x99
-
- GMODE                          0xAB
-
-Usually if a model doesn't support the first four profiles they will support
-the User Selectable Thermal Tables (USTT) profiles and vice-versa.
-
-GMODE replaces PERFORMANCE in G-Series laptops.
++------------------------------+----------+------+
+| Thermal Profile              | Type     | ID   |
++==============================+==========+======+
+| Custom                       | Special  | 0x00 |
++------------------------------+----------+------+
+| G-Mode                       | Special  | 0xAB |
++------------------------------+----------+------+
+| Quiet                        | Legacy   | 0x96 |
++------------------------------+----------+------+
+| Balanced                     | Legacy   | 0x97 |
++------------------------------+----------+------+
+| Balanced Performance         | Legacy   | 0x98 |
++------------------------------+----------+------+
+| Performance                  | Legacy   | 0x99 |
++------------------------------+----------+------+
+| Balanced                     | USTT     | 0xA0 |
++------------------------------+----------+------+
+| Balanced Performance         | USTT     | 0xA1 |
++------------------------------+----------+------+
+| Cool                         | USTT     | 0xA2 |
++------------------------------+----------+------+
+| Quiet                        | USTT     | 0xA3 |
++------------------------------+----------+------+
+| Performance                  | USTT     | 0xA4 |
++------------------------------+----------+------+
+| Low Power                    | USTT     | 0xA5 |
++------------------------------+----------+------+
+
+If a model supports the User Selectable Thermal Tables (USTT) profiles, it will
+not support the Legacy profiles and vice-versa.
+
+Every model supports the CUSTOM (0x00) thermal profile. GMODE replaces
+PERFORMANCE in G-Series laptops.
 
 WMI method GameShiftStatus([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0x1:
-         TOGGLE_GAME_SHIFT()
-         argr = GET_GAME_SHIFT_STATUS()
-
- if BYTE_0(arg2) == 0x2:
-         argr = GET_GAME_SHIFT_STATUS()
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| 0x01               | Toggle *Game Shift*.               | - None             |
++--------------------+------------------------------------+--------------------+
+| 0x02               | Get *Game Shift* status.           | - None             |
++--------------------+------------------------------------+--------------------+
 
 Game Shift Status does not change the fan speed profile but it could be some
 sort of CPU/GPU power profile. Benchmarks have not been done.
@@ -267,118 +222,82 @@ Thermal_Information does not list it.
 G-key on Dell's G-Series laptops also changes Game Shift status, so both are
 directly related.
 
-WMI method GetFanSensors([in] uint32 arg2, [out] uint32 argr)
--------------------------------------------------------------
-
-::
-
- if BYTE_0(arg2) == 0x1:
-        if is_valid_fan(BYTE_1(arg2)):
-                argr = 1
-        else:
-                argr = 0
-
- if BYTE_0(arg2) == 0x2:
-        if is_valid_fan(BYTE_1(arg2)):
-                if BYTE_2(arg2) == 0:
-                        argr == SENSOR_ID
-                else
-                        argr == 0xFFFFFFFF
-        else:
-                argr = 0
-
 Overclocking Methods
 ====================
 
-.. warning::
-   These methods have not been tested and are only partially reverse
-   engineered.
-
-WMI method Return_OverclockingReport([out] uint32 argr)
--------------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-WMI method Set_OCUIBIOSControl([in] uint32 arg2, [out] uint32 argr)
--------------------------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-WMI method Clear_OCFailSafeFlag([out] uint32 argr)
---------------------------------------------------
-
-::
-
- CSMI (0xE3, 0x99)
- argr = 0
-
-CSMI is an unknown operation.
-
-
 WMI method MemoryOCControl([in] uint32 arg2, [out] uint32 argr)
 ---------------------------------------------------------------
 
 AWCC supports memory overclocking, but this method is very intricate and has
 not been deciphered yet.
 
-GPIO methods
-============
+GPIO control Methods
+====================
 
-These methods are probably related to some kind of firmware update system,
-through a GPIO device.
+Alienware and Dell G Series devices with the AWCC interface usually have an
+embedded STM32 RGB lighting controller with USB/HID capabilities. It's vendor ID
+is ``187c`` while it's product ID may vary from model to model.
+
+The control of two GPIO pins of this MCU is exposed as WMI methods for debugging
+purposes.
+
++--------------+--------------------------------------------------------------+
+| Pin          | Description                                                  |
++==============+===============================+==============================+
+| 0            | Device Firmware Update (DFU)  | **HIGH**: Enables DFU mode   |
+|              | mode pin.                     | on next MCU boot.            |
+|              |                               +------------------------------+
+|              |                               | **LOW**: Disables DFU mode   |
+|              |                               | on next MCU boot.            |
++--------------+-------------------------------+------------------------------+
+| 1            | Negative Reset (NRST) pin.    | **HIGH**: MCU is ON.         |
+|              |                               |                              |
+|              |                               +------------------------------+
+|              |                               | **LOW**: MCU is OFF.         |
+|              |                               |                              |
++--------------+-------------------------------+------------------------------+
+
+See :ref:`acknowledgements` for more information on this MCU.
 
-.. warning::
-   These methods have not been tested and are only partially reverse
-   engineered.
+.. note::
+   Some GPIO control methods break the usual argument structure and take a
+   **Pin number** instead of an operation on the first byte.
 
 WMI method FWUpdateGPIOtoggle([in] uint32 arg2, [out] uint32 argr)
 ------------------------------------------------------------------
 
-::
-
- if BYTE_0(arg2) == 0:
-         if BYTE_1(arg2) == 1:
-                 SET_PIN_A_HIGH()
-         else:
-                 SET_PIN_A_LOW()
-
- if BYTE_0(arg2) == 1:
-         if BYTE_1(arg2) == 1:
-                 SET_PIN_B_HIGH()
-
-         else:
-                 SET_PIN_B_LOW()
-
- else:
-         argr = 1
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| Pin number         | Set the pin status                 | - Byte 1: Pin      |
+|                    |                                    |   status           |
++--------------------+------------------------------------+--------------------+
 
 WMI method ReadTotalofGPIOs([out] uint32 argr)
 ----------------------------------------------
 
-::
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| N/A                | Get the total number of GPIOs      | - None             |
++--------------------+------------------------------------+--------------------+
 
- argr = 0x02
+.. note::
+   Due to how WMI methods are implemented on the firmware level, this method
+   requires a dummy uint32 input argument when invoked.
 
 WMI method ReadGPIOpPinStatus([in] uint32 arg2, [out] uint32 argr)
 ------------------------------------------------------------------
 
-::
++--------------------+------------------------------------+--------------------+
+| Operation (Byte 0) | Description                        | Arguments          |
++====================+====================================+====================+
+| Pin number         | Get the pin status                 | - None             |
++--------------------+------------------------------------+--------------------+
 
- if BYTE_0(arg2) == 0:
-         argr = PIN_A_STATUS
-
- if BYTE_0(arg2) == 1:
-         argr = PIN_B_STATUS
+.. note::
+   There known firmware bug in some laptops where reading the status of a pin
+   also flips it.
 
 Other information Methods
 =========================
@@ -386,12 +305,18 @@ Other information Methods
 WMI method ReadChassisColor([out] uint32 argr)
 ----------------------------------------------
 
-::
+Returns the chassis color internal ID.
 
- argr = CHASSIS_COLOR_ID
+.. _acknowledgements:
 
 Acknowledgements
 ================
 
-Kudos to `AlexIII <https://github.com/AlexIII/tcc-g15>`_ for documenting
-and testing available thermal profile codes.
+Kudos to
+
+* `AlexIII <https://github.com/AlexIII/tcc-g15>`_
+* `T-Troll <https://github.com/T-Troll/alienfx-tools/>`_
+* `Gabriel Marcano <https://gabriel.marcanobrady.family/blog/2024/12/16/dell-g5-5505-se-acpi-or-figuring-out-how-to-reset-the-rgb-controller/>`_
+
+for documenting and testing some of this device's functionality, making it
+possible to generalize this driver.
diff --git linux-libre-6.15-gnu/Documentation/wmi/devices/dell-wmi-ddv.rst linux-libre-6.16-gnu/Documentation/wmi/devices/dell-wmi-ddv.rst
index e0c20af30948..109d4c5c922e 100644
--- linux-libre-6.15-gnu/Documentation/wmi/devices/dell-wmi-ddv.rst
+++ linux-libre-6.16-gnu/Documentation/wmi/devices/dell-wmi-ddv.rst
@@ -118,9 +118,6 @@ The date is encoded in the following manner:
 - bits 5 to 8 contain the manufacture month.
 - bits 9 to 15 contain the manufacture year biased by 1980.
 
-.. note::
-   The data format needs to be verified on more machines.
-
 WMI method BatterySerialNumber()
 --------------------------------
 
@@ -153,7 +150,40 @@ Returns the voltage flow of the battery in mV as an u16.
 WMI method BatteryManufactureAccess()
 -------------------------------------
 
-Returns a manufacture-defined value as an u16.
+Returns the health status of the battery as a u16.
+The health status encoded in the following manner:
+
+ - the third nibble contains the general failure mode
+ - the fourth nibble contains the specific failure code
+
+Valid failure modes are:
+
+ - permanent failure (``0x9``)
+ - overheat failure (``0xa``)
+ - overcurrent failure (``0xb``)
+
+All other failure modes are to be considered normal.
+
+The following failure codes are valid for a permanent failure:
+
+ - fuse blown (``0x0``)
+ - cell imbalance (``0x1``)
+ - overvoltage (``0x2``)
+ - fet failure (``0x3``)
+
+The last two bits of the failure code are to be ignored when the battery
+signals a permanent failure.
+
+The following failure codes a valid for a overheat failure:
+
+ - overheat at start of charging (``0x5``)
+ - overheat during charging (``0x7``)
+ - overheat during discharging (``0x8``)
+
+The following failure codes are valid for a overcurrent failure:
+
+ - overcurrent during charging (``0x6``)
+ - overcurrent during discharging (``0xb``)
 
 WMI method BatteryRelativeStateOfCharge()
 -----------------------------------------
@@ -260,14 +290,6 @@ Some machines like the Dell Inspiron 3505 only support a single battery and thus
 ignore the battery index. Because of this the driver depends on the ACPI battery
 hook mechanism to discover batteries.
 
-.. note::
-   The ACPI battery matching algorithm currently used inside the driver is
-   outdated and does not match the algorithm described above. The reasons for
-   this are differences in the handling of the ToHexString() ACPI opcode between
-   Linux and Windows, which distorts the serial number of ACPI batteries on many
-   machines. Until this issue is resolved, the driver cannot use the above
-   algorithm.
-
 Reverse-Engineering the DDV WMI interface
 =========================================
 
diff --git linux-libre-6.15-gnu/LICENSES/deprecated/CC0-1.0 linux-libre-6.16-gnu/LICENSES/deprecated/CC0-1.0
new file mode 100644
index 000000000000..d6054d574d50
--- /dev/null
+++ linux-libre-6.16-gnu/LICENSES/deprecated/CC0-1.0
@@ -0,0 +1,129 @@
+Valid-License-Identifier: CC0-1.0
+SPDX-URL: https://spdx.org/licenses/CC0-1.0.html
+Usage-Guide:
+  To use the Creative Commons Zero v1.0 Universal License put the
+  following SPDX tag/value pair into a comment according to the
+  placement guidelines in the licensing rules documentation:
+    SPDX-License-Identifier: CC0-1.0
+License-Text:
+Creative Commons Legal Code
+
+CC0 1.0 Universal
+
+    CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
+    LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN
+    ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
+    INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
+    REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS
+    PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM
+    THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED
+    HEREUNDER.
+
+Statement of Purpose
+
+The laws of most jurisdictions throughout the world automatically confer
+exclusive Copyright and Related Rights (defined below) upon the creator
+and subsequent owner(s) (each and all, an "owner") of an original work of
+authorship and/or a database (each, a "Work").
+
+Certain owners wish to permanently relinquish those rights to a Work for
+the purpose of contributing to a commons of creative, cultural and
+scientific works ("Commons") that the public can reliably and without fear
+of later claims of infringement build upon, modify, incorporate in other
+works, reuse and redistribute as freely as possible in any form whatsoever
+and for any purposes, including without limitation commercial purposes.
+These owners may contribute to the Commons to promote the ideal of a free
+culture and the further production of creative, cultural and scientific
+works, or to gain reputation or greater distribution for their Work in
+part through the use and efforts of others.
+
+For these and/or other purposes and motivations, and without any
+expectation of additional consideration or compensation, the person
+associating CC0 with a Work (the "Affirmer"), to the extent that he or she
+is an owner of Copyright and Related Rights in the Work, voluntarily
+elects to apply CC0 to the Work and publicly distribute the Work under its
+terms, with knowledge of his or her Copyright and Related Rights in the
+Work and the meaning and intended legal effect of CC0 on those rights.
+
+1. Copyright and Related Rights. A Work made available under CC0 may be
+protected by copyright and related or neighboring rights ("Copyright and
+Related Rights"). Copyright and Related Rights include, but are not
+limited to, the following:
+
+  i. the right to reproduce, adapt, distribute, perform, display,
+     communicate, and translate a Work;
+ ii. moral rights retained by the original author(s) and/or performer(s);
+iii. publicity and privacy rights pertaining to a person's image or
+     likeness depicted in a Work;
+ iv. rights protecting against unfair competition in regards to a Work,
+     subject to the limitations in paragraph 4(a), below;
+  v. rights protecting the extraction, dissemination, use and reuse of data
+     in a Work;
+ vi. database rights (such as those arising under Directive 96/9/EC of the
+     European Parliament and of the Council of 11 March 1996 on the legal
+     protection of databases, and under any national implementation
+     thereof, including any amended or successor version of such
+     directive); and
+vii. other similar, equivalent or corresponding rights throughout the
+     world based on applicable law or treaty, and any national
+     implementations thereof.
+
+2. Waiver. To the greatest extent permitted by, but not in contravention
+of, applicable law, Affirmer hereby overtly, fully, permanently,
+irrevocably and unconditionally waives, abandons, and surrenders all of
+Affirmer's Copyright and Related Rights and associated claims and causes
+of action, whether now known or unknown (including existing as well as
+future claims and causes of action), in the Work (i) in all territories
+worldwide, (ii) for the maximum duration provided by applicable law or
+treaty (including future time extensions), (iii) in any current or future
+medium and for any number of copies, and (iv) for any purpose whatsoever,
+including without limitation commercial, advertising or promotional
+purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each
+member of the public at large and to the detriment of Affirmer's heirs and
+successors, fully intending that such Waiver shall not be subject to
+revocation, rescission, cancellation, termination, or any other legal or
+equitable action to disrupt the quiet enjoyment of the Work by the public
+as contemplated by Affirmer's express Statement of Purpose.
+
+3. Public License Fallback. Should any part of the Waiver for any reason
+be judged legally invalid or ineffective under applicable law, then the
+Waiver shall be preserved to the maximum extent permitted taking into
+account Affirmer's express Statement of Purpose. In addition, to the
+extent the Waiver is so judged Affirmer hereby grants to each affected
+person a royalty-free, non transferable, non sublicensable, non exclusive,
+irrevocable and unconditional license to exercise Affirmer's Copyright and
+Related Rights in the Work (i) in all territories worldwide, (ii) for the
+maximum duration provided by applicable law or treaty (including future
+time extensions), (iii) in any current or future medium and for any number
+of copies, and (iv) for any purpose whatsoever, including without
+limitation commercial, advertising or promotional purposes (the
+"License"). The License shall be deemed effective as of the date CC0 was
+applied by Affirmer to the Work. Should any part of the License for any
+reason be judged legally invalid or ineffective under applicable law, such
+partial invalidity or ineffectiveness shall not invalidate the remainder
+of the License, and in such case Affirmer hereby affirms that he or she
+will not (i) exercise any of his or her remaining Copyright and Related
+Rights in the Work or (ii) assert any associated claims and causes of
+action with respect to the Work, in either case contrary to Affirmer's
+express Statement of Purpose.
+
+4. Limitations and Disclaimers.
+
+ a. No trademark or patent rights held by Affirmer are waived, abandoned,
+    surrendered, licensed or otherwise affected by this document.
+ b. Affirmer offers the Work as-is and makes no representations or
+    warranties of any kind concerning the Work, express, implied,
+    statutory or otherwise, including without limitation warranties of
+    title, merchantability, fitness for a particular purpose, non
+    infringement, or the absence of latent or other defects, accuracy, or
+    the present or absence of errors, whether or not discoverable, all to
+    the greatest extent permissible under applicable law.
+ c. Affirmer disclaims responsibility for clearing rights of other persons
+    that may apply to the Work or any use thereof, including without
+    limitation any person's Copyright and Related Rights in the Work.
+    Further, Affirmer disclaims responsibility for obtaining any necessary
+    consents, permissions or other rights required for any use of the
+    Work.
+ d. Affirmer understands and acknowledges that Creative Commons is not a
+    party to this document and has no duty or obligation with respect to
+    this CC0 or use of the Work.
diff --git linux-libre-6.15-gnu/MAINTAINERS linux-libre-6.16-gnu/MAINTAINERS
index dd844ac8d910..c0b444e5fd5a 100644
--- linux-libre-6.15-gnu/MAINTAINERS
+++ linux-libre-6.16-gnu/MAINTAINERS
@@ -207,7 +207,7 @@ X:	arch/*/include/uapi/
 X:	include/uapi/
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
 F:	drivers/hwmon/abituguru.c
@@ -371,7 +371,7 @@ S:	Maintained
 F:	drivers/platform/x86/quickstart.c
 
 ACPI SERIAL MULTI INSTANTIATE DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/serial-multi-instantiate.c
@@ -528,6 +528,7 @@ ADP1653 FLASH CONTROLLER DRIVER
 M:	Sakari Ailus <sakari.ailus@iki.fi>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
 F:	drivers/media/i2c/adp1653.c
 F:	include/media/i2c/adp1653.h
 
@@ -646,6 +647,13 @@ F:	drivers/iio/accel/adxl380.h
 F:	drivers/iio/accel/adxl380_i2c.c
 F:	drivers/iio/accel/adxl380_spi.c
 
+AEONSEMI PHY DRIVER
+M:	Christian Marangi <ansuelsmth@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml
+F:	drivers/net/phy/as21xxx.c
+
 AF8133J THREE-AXIS MAGNETOMETER DRIVER
 M:	Ondřej Jirman <megi@xff.cz>
 S:	Maintained
@@ -797,6 +805,9 @@ M:	Kurt Borja <kuurtb@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 L:	Dell.Client.Kernel@dell.com
 S:	Maintained
+F:	Documentation/ABI/testing/debugfs-alienware-wmi
+F:	Documentation/ABI/testing/sysfs-platform-alienware-wmi
+F:	Documentation/admin-guide/laptops/alienware-wmi.rst
 F:	Documentation/wmi/devices/alienware-wmi.rst
 F:	drivers/platform/x86/dell/alienware-wmi*
 
@@ -940,7 +951,7 @@ F:	include/linux/altera_uart.h
 AMAZON ANNAPURNA LABS FIC DRIVER
 M:	Talel Shenhar <talel@amazon.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml
 F:	drivers/irqchip/irq-al-fic.c
 
 AMAZON ANNAPURNA LABS MEMORY CONTROLLER EDAC
@@ -1097,7 +1108,7 @@ R:	Carlos Bilbao <carlos.bilbao@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	Documentation/arch/x86/amd_hsmp.rst
-F:	arch/x86/include/asm/amd_hsmp.h
+F:	arch/x86/include/asm/amd/hsmp.h
 F:	arch/x86/include/uapi/asm/amd_hsmp.h
 F:	drivers/platform/x86/amd/hsmp/
 
@@ -1142,11 +1153,10 @@ M:	Mario Limonciello <mario.limonciello@amd.com>
 M:	Yazen Ghannam <yazen.ghannam@amd.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	arch/x86/include/asm/amd_node.h
+F:	arch/x86/include/asm/amd/node.h
 F:	arch/x86/kernel/amd_node.c
 
 AMD PDS CORE DRIVER
-M:	Shannon Nelson <shannon.nelson@amd.com>
 M:	Brett Creeley <brett.creeley@amd.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -1216,7 +1226,9 @@ AMD SPI DRIVER
 M:	Raju Rangoju <Raju.Rangoju@amd.com>
 L:	linux-spi@vger.kernel.org
 S:	Supported
+F:	drivers/spi/spi-amd-pci.c
 F:	drivers/spi/spi-amd.c
+F:	drivers/spi/spi-amd.h
 
 AMD XDNA DRIVER
 M:	Min Ma <min.ma@amd.com>
@@ -1253,6 +1265,31 @@ F:	Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
 F:	drivers/perf/amlogic/
 F:	include/soc/amlogic/
 
+AMLOGIC ISP DRIVER
+M:	Keke Li <keke.li@amlogic.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/admin-guide/media/c3-isp.dot
+F:	Documentation/admin-guide/media/c3-isp.rst
+F:	Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml
+F:	Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst
+F:	drivers/media/platform/amlogic/c3/isp/
+F:	include/uapi/linux/media/amlogic/
+
+AMLOGIC MIPI ADAPTER DRIVER
+M:	Keke Li <keke.li@amlogic.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
+F:	drivers/media/platform/amlogic/c3/mipi-adapter/
+
+AMLOGIC MIPI CSI2 DRIVER
+M:	Keke Li <keke.li@amlogic.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
+F:	drivers/media/platform/amlogic/c3/mipi-csi2/
+
 AMLOGIC PINCTRL DRIVER
 M:	Xianwei Zhao <xianwei.zhao@amlogic.com>
 L:	linux-amlogic@lists.infradead.org
@@ -1300,12 +1337,21 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	drivers/net/amt.c
 
+ANALOG DEVICES INC AD3530R DRIVER
+M:	Kim Seer Paller <kimseer.paller@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml
+F:	drivers/iio/dac/ad3530r.c
+
 ANALOG DEVICES INC AD3552R DRIVER
 M:	Nuno Sá <nuno.sa@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+F:	Documentation/iio/ad3552r.rst
 F:	drivers/iio/dac/ad3552r.c
 
 ANALOG DEVICES INC AD4000 DRIVER
@@ -1349,6 +1395,16 @@ F:	Documentation/iio/ad4695.rst
 F:	drivers/iio/adc/ad4695.c
 F:	include/dt-bindings/iio/adc/adi,ad4695.h
 
+ANALOG DEVICES INC AD4851 DRIVER
+M:	Sergiu Cuciurean <sergiu.cuciurean@analog.com>
+M:	Dragos Bogdan <dragos.bogdan@analog.com>
+R:	Antoniu Miclaus <antoniu.miclaus@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
+F:	drivers/iio/adc/ad4851.c
+
 ANALOG DEVICES INC AD7091R DRIVER
 M:	Marcelo Schmitt <marcelo.schmitt@analog.com>
 L:	linux-iio@vger.kernel.org
@@ -1567,6 +1623,13 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
 F:	drivers/iio/filter/admv8818.c
 
+ANALOG DEVICES INC ADP5055 DRIVER
+M:	Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/regulator/adi,adp5055-regulator.yaml
+F:	drivers/regulator/adp5055-regulator.c
+
 ANALOG DEVICES INC ADP5061 DRIVER
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org
@@ -1587,14 +1650,14 @@ M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	linux-media@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
-F:	Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+F:	Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
 F:	drivers/media/i2c/adv7180.c
 
 ANALOG DEVICES INC ADV748X DRIVER
 M:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/i2c/adv748x.yaml
+F:	Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
 F:	drivers/media/i2c/adv748x/*
 
 ANALOG DEVICES INC ADV7511 DRIVER
@@ -1607,7 +1670,7 @@ ANALOG DEVICES INC ADV7604 DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+F:	Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
 F:	drivers/media/i2c/adv7604*
 
 ANALOG DEVICES INC ADV7842 DRIVER
@@ -1682,7 +1745,7 @@ M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 M:	Arve Hjønnevåg <arve@android.com>
 M:	Todd Kjos <tkjos@android.com>
 M:	Martijn Coenen <maco@android.com>
-M:	Joel Fernandes <joel@joelfernandes.org>
+M:	Joel Fernandes <joelagnelf@nvidia.com>
 M:	Christian Brauner <christian@brauner.io>
 M:	Carlos Llamas <cmllamas@google.com>
 M:	Suren Baghdasaryan <surenb@google.com>
@@ -1694,7 +1757,7 @@ F:	drivers/android/
 ANDROID GOLDFISH PIC DRIVER
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml
 F:	drivers/irqchip/irq-goldfish-pic.c
 
 ANDROID GOLDFISH RTC DRIVER
@@ -1918,7 +1981,7 @@ F:	Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
 F:	Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
 F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
-F:	Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
 F:	Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
 F:	arch/arm/boot/dts/arm/arm-realview-*
 F:	arch/arm/boot/dts/arm/integrator*
@@ -2102,7 +2165,7 @@ F:	arch/arm/plat-*/
 
 ARM/ACTIONS SEMI ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-actions@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2251,7 +2314,7 @@ F:	sound/soc/codecs/cs42l84.*
 F:	sound/soc/codecs/ssm3515.c
 
 ARM/APPLE MACHINE SUPPORT
-M:	Sven Peter <sven@svenpeter.dev>
+M:	Sven Peter <sven@kernel.org>
 M:	Janne Grunau <j@jannau.net>
 R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 R:	Neal Gompa <neal@gompa.dev>
@@ -2277,11 +2340,13 @@ F:	Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
 F:	Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
 F:	Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
 F:	Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
+F:	Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml
 F:	Documentation/devicetree/bindings/pci/apple,pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 F:	Documentation/devicetree/bindings/power/apple*
 F:	Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
 F:	Documentation/devicetree/bindings/spi/apple,spi.yaml
+F:	Documentation/devicetree/bindings/spmi/apple,spmi.yaml
 F:	Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
 F:	arch/arm64/boot/dts/apple/
 F:	drivers/bluetooth/hci_bcm4377.c
@@ -2297,15 +2362,18 @@ F:	drivers/iommu/io-pgtable-dart.c
 F:	drivers/irqchip/irq-apple-aic.c
 F:	drivers/nvme/host/apple.c
 F:	drivers/nvmem/apple-efuses.c
+F:	drivers/nvmem/apple-spmi-nvmem.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/pwm/pwm-apple.c
 F:	drivers/soc/apple/*
 F:	drivers/spi/spi-apple.c
+F:	drivers/spmi/spmi-apple-controller.c
 F:	drivers/video/backlight/apple_dwi_bl.c
 F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h
 F:	include/linux/soc/apple/*
+F:	include/uapi/drm/asahi_drm.h
 
 ARM/ARTPEC MACHINE SUPPORT
 M:	Jesper Nilsson <jesper.nilsson@axis.com>
@@ -2328,7 +2396,7 @@ L:	linux-i2c@vger.kernel.org
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
-F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml
 F:	drivers/i2c/busses/i2c-aspeed.c
 F:	drivers/irqchip/irq-aspeed-i2c-ic.c
 
@@ -2354,7 +2422,7 @@ F:	arch/arm/boot/dts/intel/axm/
 F:	arch/arm/mach-axxia/
 
 ARM/BITMAIN ARCHITECTURE
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -2491,6 +2559,7 @@ F:	include/dt-bindings/bus/moxtet.h
 F:	include/linux/armada-37xx-rwtm-mailbox.h
 F:	include/linux/moxtet.h
 F:	include/linux/turris-omnia-mcu-interface.h
+F:	include/linux/turris-signing-key.h
 
 ARM/FARADAY FA526 PORT
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
@@ -3022,7 +3091,7 @@ F:	include/linux/soc/qcom/
 F:	include/soc/qcom/
 
 ARM/RDA MICRO ARCHITECTURE
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-unisoc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -3064,10 +3133,10 @@ F:	arch/arm/include/debug/renesas-scif.S
 F:	arch/arm/mach-shmobile/
 F:	arch/arm64/boot/dts/renesas/
 F:	arch/riscv/boot/dts/renesas/
-F:	drivers/nvmem/rcar-efuse.c
 F:	drivers/pmdomain/renesas/
 F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
+N:	rcar
 K:	\brenesas,
 
 ARM/RISCPC ARCHITECTURE
@@ -3434,7 +3503,10 @@ M:	Alexey Charkov <alchark@gmail.com>
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Odd Fixes
-F:	Documentation/devicetree/bindings/i2c/i2c-wmt.txt
+F:	Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
+F:	Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml
+F:	Documentation/devicetree/bindings/pwm/via,vt8500-pwm.yaml
 F:	arch/arm/boot/dts/vt8500/
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/timer-vt8500.c
@@ -3442,6 +3514,7 @@ F:	drivers/i2c/busses/i2c-viai2c-wmt.c
 F:	drivers/mmc/host/wmt-sdmmc.c
 F:	drivers/pwm/pwm-vt8500.c
 F:	drivers/rtc/rtc-vt8500.c
+F:	drivers/soc/vt8500/
 F:	drivers/tty/serial/vt8500_serial.c
 F:	drivers/video/fbdev/vt8500lcdfb.*
 F:	drivers/video/fbdev/wm8505fb*
@@ -3477,7 +3550,7 @@ F:	arch/arm64/boot/Makefile
 F:	scripts/make_fit.py
 
 ARM64 PLATFORM DRIVERS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	platform-driver-x86@vger.kernel.org
@@ -3584,7 +3657,7 @@ ASPEED SCU INTERRUPT CONTROLLER DRIVER
 M:	Eddie James <eajames@linux.ibm.com>
 L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml
 F:	drivers/irqchip/irq-aspeed-scu-ic.c
 F:	include/dt-bindings/interrupt-controller/aspeed-scu-ic.h
 
@@ -3638,7 +3711,7 @@ F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
 ASUS TF103C DOCK DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git
@@ -3725,7 +3798,7 @@ F:	Documentation/admin-guide/aoe/
 F:	drivers/block/aoe/
 
 ATC260X PMIC MFD DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 M:	Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
 L:	linux-actions@lists.infradead.org
 S:	Maintained
@@ -3880,6 +3953,9 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core.git
 F:	Documentation/driver-api/auxiliary_bus.rst
 F:	drivers/base/auxiliary.c
 F:	include/linux/auxiliary_bus.h
+F:	rust/helpers/auxiliary.c
+F:	rust/kernel/auxiliary.rs
+F:	samples/rust/rust_driver_auxiliary.rs
 
 AUXILIARY DISPLAY DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
@@ -4105,6 +4181,7 @@ F:	include/linux/cpumask_types.h
 F:	include/linux/find.h
 F:	include/linux/nodemask.h
 F:	include/linux/nodemask_types.h
+F:	include/uapi/linux/bits.h
 F:	include/vdso/bits.h
 F:	lib/bitmap-str.c
 F:	lib/bitmap.c
@@ -4117,6 +4194,7 @@ F:	tools/include/linux/bitfield.h
 F:	tools/include/linux/bitmap.h
 F:	tools/include/linux/bits.h
 F:	tools/include/linux/find.h
+F:	tools/include/uapi/linux/bits.h
 F:	tools/include/vdso/bits.h
 F:	tools/lib/bitmap.c
 F:	tools/lib/find_bit.c
@@ -4203,6 +4281,16 @@ F:	Documentation/ABI/stable/sysfs-class-bluetooth
 F:	include/net/bluetooth/
 F:	net/bluetooth/
 
+BLZP1600 GPIO DRIVER
+M:	James Cowgill <james.cowgill@blaize.com>
+M:	Matt Redfearn <matt.redfearn@blaize.com>
+M:	Neil Jones <neil.jones@blaize.com>
+M:	Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml
+F:	drivers/gpio/gpio-blzp1600.c
+
 BONDING DRIVER
 M:	Jay Vosburgh <jv@jvosburgh.net>
 L:	netdev@vger.kernel.org
@@ -4468,6 +4556,7 @@ BPF [NETWORKING] (tcx & tc BPF, sock_addr)
 M:	Martin KaFai Lau <martin.lau@linux.dev>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 R:	John Fastabend <john.fastabend@gmail.com>
+R:	Stanislav Fomichev <sdf@fomichev.me>
 L:	bpf@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -4570,6 +4659,7 @@ F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
 N:	bcm2711
+N:	bcm2712
 N:	bcm283*
 N:	raspberrypi
 
@@ -5267,6 +5357,7 @@ F:	include/uapi/linux/can/isotp.h
 F:	include/uapi/linux/can/raw.h
 F:	net/can/
 F:	net/sched/em_canid.c
+F:	tools/testing/selftests/net/can/
 
 CAN-J1939 NETWORK LAYER
 M:	Robin van der Gracht <robin@protonic.nl>
@@ -5479,6 +5570,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	drivers/char/
 F:	drivers/misc/
 F:	include/linux/miscdevice.h
+F:	rust/kernel/miscdevice.rs
 F:	samples/rust/rust_misc_device.rs
 X:	drivers/char/agp/
 X:	drivers/char/hw_random/
@@ -5510,7 +5602,7 @@ F:	Documentation/dev-tools/checkpatch.rst
 
 CHINESE DOCUMENTATION
 M:	Alex Shi <alexs@kernel.org>
-M:	Yanteng Si <siyanteng@loongson.cn>
+M:	Yanteng Si <si.yanteng@linux.dev>
 R:	Dongliang Mu <dzm91@hust.edu.cn>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/alexs/linux.git
 S:	Maintained
@@ -5524,14 +5616,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
 F:	drivers/usb/chipidea/
 
 CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
 F:	drivers/input/touchscreen/chipone_icn8318.c
 
 CHIPONE ICN8505 I2C TOUCHSCREEN DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/chipone_icn8505.c
@@ -5655,7 +5747,6 @@ F:	include/sound/cs*
 F:	sound/pci/hda/cirrus*
 F:	sound/pci/hda/cs*
 F:	sound/pci/hda/hda_component*
-F:	sound/pci/hda/hda_cs_dsp_ctl.*
 F:	sound/soc/codecs/cs*
 
 CIRRUS LOGIC HAPTIC DRIVERS
@@ -5891,12 +5982,14 @@ F:	include/dt-bindings/clock/
 F:	include/linux/clk-pr*
 F:	include/linux/clk/
 F:	include/linux/of_clk.h
+F:	rust/helpers/clk.c
+F:	rust/kernel/clk.rs
 X:	drivers/clk/clkdev.c
 
 COMMON INTERNET FILE SYSTEM CLIENT (CIFS and SMB3)
 M:	Steve French <sfrench@samba.org>
 M:	Steve French <smfrench@gmail.com>
-R:	Paulo Alcantara <pc@manguebit.com> (DFS, global name space)
+R:	Paulo Alcantara <pc@manguebit.org> (DFS, global name space)
 R:	Ronnie Sahlberg <ronniesahlberg@gmail.com> (directory leases, sparse files)
 R:	Shyam Prasad N <sprasad@microsoft.com> (multichannel)
 R:	Tom Talpey <tom@talpey.com> (RDMA, smbdirect)
@@ -5983,7 +6076,9 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux.git configfs-next
 F:	fs/configfs/
 F:	include/linux/configfs.h
+F:	rust/kernel/configfs.rs
 F:	samples/configfs/
+F:	samples/rust/rust_configfs.rs
 
 CONGATEC BOARD CONTROLLER MFD DRIVER
 M:	Thomas Richard <thomas.richard@bootlin.com>
@@ -6148,6 +6243,7 @@ F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 F:	include/linux/sched/cpufreq.h
 F:	kernel/sched/cpufreq*.c
+F:	rust/kernel/cpufreq.rs
 F:	tools/testing/selftests/cpufreq/
 
 CPU HOTPLUG
@@ -6161,6 +6257,8 @@ F:	include/linux/cpuhotplug.h
 F:	include/linux/smpboot.h
 F:	kernel/cpu.c
 F:	kernel/smpboot.*
+F:	rust/helper/cpu.c
+F:	rust/kernel/cpu.rs
 
 CPU IDLE TIME MANAGEMENT FRAMEWORK
 M:	"Rafael J. Wysocki" <rafael@kernel.org>
@@ -6245,6 +6343,12 @@ L:	linux-riscv@lists.infradead.org
 S:	Maintained
 F:	drivers/cpuidle/cpuidle-riscv-sbi.c
 
+CPUMASK API [RUST]
+M:	Viresh Kumar <viresh.kumar@linaro.org>
+R:	Yury Norov <yury.norov@gmail.com>
+S:	Maintained
+F:	rust/kernel/cpumask.rs
+
 CRAMFS FILESYSTEM
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Maintained
@@ -6261,6 +6365,7 @@ F:	Documentation/staging/crc*
 F:	arch/*/lib/crc*
 F:	include/linux/crc*
 F:	lib/crc*
+F:	lib/tests/crc_kunit.c
 F:	scripts/gen-crc-consts.py
 
 CREATIVE SB0540
@@ -6300,6 +6405,16 @@ F:	crypto/
 F:	drivers/crypto/
 F:	include/crypto/
 F:	include/linux/crypto*
+
+CRYPTO LIBRARY
+M:	Eric Biggers <ebiggers@kernel.org>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+M:	Ard Biesheuvel <ardb@kernel.org>
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-next
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-fixes
+F:	arch/*/lib/crypto/
 F:	lib/crypto/
 
 CRYPTO SPEED TEST COMPARE
@@ -6516,6 +6631,12 @@ F:	net/ax25/ax25_out.c
 F:	net/ax25/ax25_timer.c
 F:	net/ax25/sysctl_net_ax25.c
 
+DASHARO ACPI PLATFORM DRIVER
+M:	Michał Kopeć <michal.kopec@3mdeb.com>
+S:	Maintained
+W:	https://docs.dasharo.com/
+F:	drivers/platform/x86/dasharo-acpi.c
+
 DATA ACCESS MONITOR
 M:	SeongJae Park <sj@kernel.org>
 L:	damon@lists.linux.dev
@@ -6555,15 +6676,6 @@ S:	Maintained
 F:	Documentation/scsi/dc395x.rst
 F:	drivers/scsi/dc395x.*
 
-DCCP PROTOCOL
-L:	dccp@vger.kernel.org
-S:	Orphan
-W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
-F:	include/linux/dccp.h
-F:	include/linux/tfrc.h
-F:	include/uapi/linux/dccp.h
-F:	net/dccp/
-
 DEBUGOBJECTS:
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
@@ -6730,7 +6842,7 @@ S:	Orphan
 F:	drivers/mtd/nand/raw/denali*
 
 DESIGNWARE EDMA CORE IP DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/dw-edma/
@@ -6809,7 +6921,7 @@ F:	include/dt-bindings/pmu/exynos_ppmu.h
 F:	include/linux/devfreq-event.h
 
 DEVICE RESOURCE MANAGEMENT HELPERS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 R:	Matti Vaittinen <mazziesaccount@gmail.com>
 S:	Maintained
 F:	include/linux/devm-helpers.h
@@ -6853,6 +6965,12 @@ L:	linux-rtc@vger.kernel.org
 S:	Maintained
 F:	drivers/rtc/rtc-sd2405al.c
 
+DFROBOT SEN0322 DRIVER
+M:	Tóth János <gomba007@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/chemical/sen0322.c
+
 DH ELECTRONICS DHSOM SOM AND BOARD SUPPORT
 M:	Christoph Niedermaier <cniedermaier@dh-electronics.com>
 M:	Marek Vasut <marex@denx.de>
@@ -6866,7 +6984,7 @@ DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
 S:	Supported
 W:	http://www.dialog-semiconductor.com/products
-F:	Documentation/devicetree/bindings/input/dlg,da72??.txt
+F:	Documentation/devicetree/bindings/input/dlg,da72??.yaml
 F:	Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
 F:	Documentation/devicetree/bindings/mfd/da90*.txt
 F:	Documentation/devicetree/bindings/mfd/dlg,da90*.yaml
@@ -7084,7 +7202,10 @@ T:	git git://git.lwn.net/linux.git docs-next
 F:	Documentation/
 F:	scripts/check-variable-fonts.sh
 F:	scripts/documentation-file-ref-check
-F:	scripts/kernel-doc
+F:	scripts/get_abi.py
+F:	scripts/kernel-doc*
+F:	scripts/lib/abi/*
+F:	scripts/lib/kdoc/*
 F:	scripts/sphinx-pre-install
 X:	Documentation/ABI/
 X:	Documentation/admin-guide/media/
@@ -7380,8 +7501,7 @@ M:	Javier Martinez Canillas <javierm@redhat.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
-F:	drivers/gpu/drm/tiny/ofdrm.c
-F:	drivers/gpu/drm/tiny/simpledrm.c
+F:	drivers/gpu/drm/sysfb/
 F:	drivers/video/aperture.c
 F:	drivers/video/nomodeset.c
 F:	include/linux/aperture.h
@@ -7400,7 +7520,7 @@ F:	drivers/gpu/drm/gud/
 F:	include/drm/gud.h
 
 DRM DRIVER FOR GRAIN MEDIA GM12U320 PROJECTORS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	drivers/gpu/drm/tiny/gm12u320.c
@@ -7460,7 +7580,7 @@ F:	drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
 
 DRM DRIVER FOR LG SW43408 PANELS
 M:	Sumit Semwal <sumit.semwal@linaro.org>
-M:	Caleb Connolly <caleb.connolly@linaro.org>
+M:	Casey Connolly <casey.connolly@linaro.org>
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
@@ -7512,7 +7632,7 @@ F:	Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
 F:	drivers/gpu/drm/tiny/panel-mipi-dbi.c
 
 DRM DRIVER for Qualcomm Adreno GPUs
-M:	Rob Clark <robdclark@gmail.com>
+M:	Rob Clark <robin.clark@oss.qualcomm.com>
 R:	Sean Paul <sean@poorly.run>
 R:	Konrad Dybcio <konradybcio@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
@@ -7522,6 +7642,7 @@ S:	Maintained
 B:	https://gitlab.freedesktop.org/drm/msm/-/issues
 T:	git https://gitlab.freedesktop.org/drm/msm.git
 F:	Documentation/devicetree/bindings/display/msm/gpu.yaml
+F:	Documentation/devicetree/bindings/opp/opp-v2-qcom-adreno.yaml
 F:	drivers/gpu/drm/msm/adreno/
 F:	drivers/gpu/drm/msm/msm_gpu.*
 F:	drivers/gpu/drm/msm/msm_gpu_devfreq.*
@@ -7530,9 +7651,10 @@ F:	drivers/gpu/drm/msm/registers/adreno/
 F:	include/uapi/drm/msm_drm.h
 
 DRM DRIVER for Qualcomm display hardware
-M:	Rob Clark <robdclark@gmail.com>
-M:	Abhinav Kumar <quic_abhinavk@quicinc.com>
+M:	Rob Clark <robin.clark@oss.qualcomm.com>
 M:	Dmitry Baryshkov <lumag@kernel.org>
+R:	Abhinav Kumar <abhinav.kumar@linux.dev>
+R:	Jessica Zhang <jessica.zhang@oss.qualcomm.com>
 R:	Sean Paul <sean@poorly.run>
 R:	Marijn Suijten <marijn.suijten@somainline.org>
 L:	linux-arm-msm@vger.kernel.org
@@ -7575,6 +7697,12 @@ T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
 F:	drivers/gpu/drm/panel/panel-novatek-nt36672a.c
 
+DRM DRIVER FOR NOVATEK NT37801 PANELS
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
+F:	drivers/gpu/drm/panel/panel-novatek-nt37801.c
+
 DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS
 M:	Lyude Paul <lyude@redhat.com>
 M:	Danilo Krummrich <dakr@kernel.org>
@@ -7601,6 +7729,18 @@ T:	git https://gitlab.freedesktop.org/drm/nova.git nova-next
 F:	Documentation/gpu/nova/
 F:	drivers/gpu/nova-core/
 
+DRM DRIVER FOR NVIDIA GPUS [RUST]
+M:	Danilo Krummrich <dakr@kernel.org>
+L:	nouveau@lists.freedesktop.org
+S:	Supported
+Q:	https://patchwork.freedesktop.org/project/nouveau/
+B:	https://gitlab.freedesktop.org/drm/nova/-/issues
+C:	irc://irc.oftc.net/nouveau
+T:	git https://gitlab.freedesktop.org/drm/nova.git nova-next
+F:	Documentation/gpu/nova/
+F:	drivers/gpu/drm/nova/
+F:	include/uapi/drm/nova_drm.h
+
 DRM DRIVER FOR OLIMEX LCD-OLINUXINO PANELS
 M:	Stefan Mavrodiev <stefan@olimex.com>
 S:	Maintained
@@ -7690,7 +7830,13 @@ M:	David Lechner <david@lechnology.com>
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
-F:	drivers/gpu/drm/tiny/st7586.c
+F:	drivers/gpu/drm/sitronix/st7586.c
+
+DRM DRIVER FOR SITRONIX ST7571 PANELS
+M:	Marcus Folkesson <marcus.folkesson@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/sitronix,st7571.yaml
+F:	drivers/gpu/drm/sitronix/st7571-i2c.c
 
 DRM DRIVER FOR SITRONIX ST7701 PANELS
 M:	Jagan Teki <jagan@amarulasolutions.com>
@@ -7711,7 +7857,7 @@ M:	David Lechner <david@lechnology.com>
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
-F:	drivers/gpu/drm/tiny/st7735r.c
+F:	drivers/gpu/drm/sitronix/st7735r.c
 
 DRM DRIVER FOR SOLOMON SSD130X OLED DISPLAYS
 M:	Javier Martinez Canillas <javierm@redhat.com>
@@ -7774,7 +7920,7 @@ F:	drivers/gpu/drm/ci/xfails/vkms*
 F:	drivers/gpu/drm/vkms/
 
 DRM DRIVER FOR VIRTUALBOX VIRTUAL GPU
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
@@ -7808,6 +7954,7 @@ F:	Documentation/devicetree/bindings/display/
 F:	Documentation/devicetree/bindings/gpu/
 F:	Documentation/gpu/
 F:	drivers/gpu/
+F:	rust/kernel/drm/
 F:	include/drm/
 F:	include/linux/vga*
 F:	include/uapi/drm/
@@ -7824,6 +7971,7 @@ F:	Documentation/devicetree/bindings/gpu/
 F:	Documentation/gpu/
 F:	drivers/gpu/drm/
 F:	drivers/gpu/vga/
+F:	rust/kernel/drm/
 F:	include/drm/drm
 F:	include/linux/vga*
 F:	include/uapi/drm/
@@ -7863,8 +8011,8 @@ F:	drivers/gpu/drm/ci/xfails/meson*
 F:	drivers/gpu/drm/meson/
 
 DRM DRIVERS FOR ATMEL HLCDC
-M:	Sam Ravnborg <sam@ravnborg.org>
-M:	Boris Brezillon <bbrezillon@kernel.org>
+M:	Manikandan Muralidharan <manikandan.m@microchip.com>
+M:	Dharma Balasubiramani <dharma.b@microchip.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
@@ -7905,7 +8053,7 @@ L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/fsl,dcu.txt
-F:	Documentation/devicetree/bindings/display/fsl,tcon.txt
+F:	Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
 F:	drivers/gpu/drm/fsl-dcu/
 
 DRM DRIVERS FOR FREESCALE IMX 5/6
@@ -8173,7 +8321,7 @@ F:	drivers/gpu/drm/panel/
 F:	include/drm/drm_panel.h
 
 DRM PRIVACY-SCREEN CLASS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
@@ -8192,7 +8340,8 @@ F:	drivers/gpu/drm/ttm/
 F:	include/drm/ttm/
 
 DRM AUTOMATED TESTING
-M:	Helen Koike <helen.koike@collabora.com>
+M:	Helen Koike <helen.fornazier@gmail.com>
+M:	Vignesh Raman <vignesh.raman@collabora.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
@@ -8362,6 +8511,18 @@ W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/dvb-frontends/ec100*
 
+ECONET MIPS PLATFORM
+M:	Caleb James DeLisle <cjd@cjdns.fr>
+L:	linux-mips@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
+F:	Documentation/devicetree/bindings/mips/econet.yaml
+F:	Documentation/devicetree/bindings/timer/econet,en751221-timer.yaml
+F:	arch/mips/boot/dts/econet/
+F:	arch/mips/econet/
+F:	drivers/clocksource/timer-econet-en751221.c
+F:	drivers/irqchip/irq-econet-en751221.c
+
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <code@tyhicks.com>
 L:	ecryptfs@vger.kernel.org
@@ -8546,7 +8707,7 @@ S:	Maintained
 F:	drivers/edac/pnd2_edac.[ch]
 
 EDAC-QCOM
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
 L:	linux-edac@vger.kernel.org
 S:	Maintained
@@ -8840,6 +9001,8 @@ F:	include/linux/elf.h
 F:	include/uapi/linux/auxvec.h
 F:	include/uapi/linux/binfmts.h
 F:	include/uapi/linux/elf.h
+F:	kernel/fork.c
+F:	mm/vma_exec.c
 F:	tools/testing/selftests/exec/
 N:	asm/elf.h
 N:	binfmt
@@ -9017,9 +9180,10 @@ F:	lib/fault-inject.c
 F:	tools/testing/fault-injection/
 
 FBTFT Framebuffer drivers
+M:	Andy Shevchenko <andy@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 L:	linux-fbdev@vger.kernel.org
-S:	Orphan
+S:	Odd fixes
 F:	drivers/staging/fbtft/
 
 FC0011 TUNER DRIVER
@@ -9120,7 +9284,7 @@ F:	include/linux/iomap.h
 
 FILESYSTEMS [NETFS LIBRARY]
 M:	David Howells <dhowells@redhat.com>
-M:	Paulo Alcantara <pc@manguebit.com>
+M:	Paulo Alcantara <pc@manguebit.org>
 L:	netfs@lists.linux.dev
 L:	linux-fsdevel@vger.kernel.org
 S:	Supported
@@ -9214,7 +9378,7 @@ FLEXTIMER FTM-QUADDEC DRIVER
 M:	Patrick Havelange <patrick.havelange@essensium.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/counter/ftm-quaddec.txt
+F:	Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml
 F:	drivers/counter/ftm-quaddec.c
 
 FLOPPY DRIVER
@@ -9387,6 +9551,7 @@ F:	Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
 F:	drivers/net/ethernet/freescale/enetc/
 F:	include/linux/fsl/enetc_mdio.h
 F:	include/linux/fsl/netc_global.h
+F:	include/linux/fsl/ntmp.h
 
 FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
 M:	Claudiu Manoil <claudiu.manoil@nxp.com>
@@ -9737,7 +9902,7 @@ L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 W:	https://github.com/libfuse/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
-F:	Documentation/filesystems/fuse.rst
+F:	Documentation/filesystems/fuse*
 F:	fs/fuse/
 F:	include/uapi/linux/fuse.h
 
@@ -9779,7 +9944,6 @@ F:	drivers/fwctl/mlx5/
 
 FWCTL PDS DRIVER
 M:	Brett Creeley <brett.creeley@amd.com>
-R:	Shannon Nelson <shannon.nelson@amd.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/fwctl/pds/
@@ -10060,7 +10224,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/connector/gocontroll,moduline-module-slot.yaml
 
 GOODIX TOUCHSCREEN
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/goodix*
@@ -10091,6 +10255,7 @@ L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 C:	irc://irc.oftc.net/pixel6-kernel-dev
 F:	Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
+F:	Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml
 F:	arch/arm64/boot/dts/exynos/google/
 F:	drivers/clk/samsung/clk-gs101.c
 F:	drivers/phy/samsung/phy-gs101-ufs.c
@@ -10098,7 +10263,7 @@ F:	include/dt-bindings/clock/google,gs101.h
 K:	[gG]oogle.?[tT]ensor
 
 GPD POCKET FAN DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/gpd-pocket-fan.c
@@ -10116,7 +10281,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
-F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi-*.c
 F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO AGGREGATOR
@@ -10342,7 +10507,7 @@ S:	Maintained
 F:	block/partitions/efi.*
 
 HABANALABS PCI DRIVER
-M:	Ofir Bitton <obitton@habana.ai>
+M:	Yaron Avizrat <yaron.avizrat@intel.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 C:	irc://irc.oftc.net/dri-devel
@@ -10609,20 +10774,23 @@ F:	kernel/time/timer_list.c
 F:	kernel/time/timer_migration.*
 F:	tools/testing/selftests/timers/
 
-HIGH-RESOLUTION TIMERS [RUST]
+DELAY, SLEEP, TIMEKEEPING, TIMERS [RUST]
 M:	Andreas Hindborg <a.hindborg@kernel.org>
 R:	Boqun Feng <boqun.feng@gmail.com>
+R:	FUJITA Tomonori <fujita.tomonori@gmail.com>
 R:	Frederic Weisbecker <frederic@kernel.org>
 R:	Lyude Paul <lyude@redhat.com>
 R:	Thomas Gleixner <tglx@linutronix.de>
 R:	Anna-Maria Behnsen <anna-maria@linutronix.de>
+R:	John Stultz <jstultz@google.com>
+R:	Stephen Boyd <sboyd@kernel.org>
 L:	rust-for-linux@vger.kernel.org
 S:	Supported
 W:	https://rust-for-linux.com
 B:	https://github.com/Rust-for-Linux/linux/issues
-T:	git https://github.com/Rust-for-Linux/linux.git hrtimer-next
-F:	rust/kernel/time/hrtimer.rs
-F:	rust/kernel/time/hrtimer/
+T:	git https://github.com/Rust-for-Linux/linux.git timekeeping-next
+F:	rust/kernel/time.rs
+F:	rust/kernel/time/
 
 HIGH-SPEED SCC DRIVER FOR AX.25
 L:	linux-hams@vger.kernel.org
@@ -10668,13 +10836,13 @@ F:	net/dsa/tag_hellcreek.c
 
 HISILICON DMA DRIVER
 M:	Zhou Wang <wangzhou1@hisilicon.com>
-M:	Jie Hai <haijie1@huawei.com>
+M:	Longfang Liu <liulongfang@huawei.com>
 L:	dmaengine@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/hisi_dma.c
 
 HISILICON GPIO DRIVER
-M:	Jay Fang <f.fangjian@huawei.com>
+M:	Yang Shen <shenyang39@huawei.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -10750,6 +10918,7 @@ W:	http://www.hisilicon.com
 F:	Documentation/admin-guide/perf/hisi-pcie-pmu.rst
 F:	Documentation/admin-guide/perf/hisi-pmu.rst
 F:	drivers/perf/hisilicon
+F:	tools/perf/pmu-events/arch/arm64/hisilicon/
 
 HISILICON PTT DRIVER
 M:	Yicong Yang <yangyicong@hisilicon.com>
@@ -10800,7 +10969,7 @@ F:	drivers/crypto/hisilicon/sec2/sec_crypto.h
 F:	drivers/crypto/hisilicon/sec2/sec_main.c
 
 HISILICON SPI Controller DRIVER FOR KUNPENG SOCS
-M:	Jay Fang <f.fangjian@huawei.com>
+M:	Yang Shen <shenyang39@huawei.com>
 L:	linux-spi@vger.kernel.org
 S:	Maintained
 W:	http://www.hisilicon.com
@@ -10826,7 +10995,7 @@ S:	Maintained
 F:	drivers/crypto/hisilicon/trng/trng.c
 
 HISILICON V3XX SPI NOR FLASH Controller Driver
-M:	Jay Fang <f.fangjian@huawei.com>
+M:	Yang Shen <shenyang39@huawei.com>
 S:	Maintained
 W:	http://www.hisilicon.com
 F:	drivers/spi/spi-hisi-sfc-v3xx.c
@@ -10840,7 +11009,8 @@ F:	Documentation/ABI/testing/debugfs-hisi-zip
 F:	drivers/crypto/hisilicon/zip/
 
 HMM - Heterogeneous Memory Management
-M:	Jérôme Glisse <jglisse@redhat.com>
+M:	Jason Gunthorpe <jgg@nvidia.com>
+M:	Leon Romanovsky <leonro@nvidia.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	Documentation/mm/hmm.rst
@@ -10971,16 +11141,26 @@ S:	Maintained
 F:	Documentation/networking/device_drivers/ethernet/huawei/hinic.rst
 F:	drivers/net/ethernet/huawei/hinic/
 
+HUAWEI 3RD GEN ETHERNET DRIVER
+M:	Fan Gong <gongfan1@huawei.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
+F:	drivers/net/ethernet/huawei/hinic3/
+
 HUAWEI MATEBOOK E GO EMBEDDED CONTROLLER DRIVER
 M:	Pengyu Luo <mitltlatltl@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml
 F:	drivers/platform/arm64/huawei-gaokun-ec.c
+F:	drivers/power/supply/huawei-gaokun-battery.c
+F:	drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
 F:	include/linux/platform_data/huawei-gaokun-ec.h
 
 HUGETLB SUBSYSTEM
 M:	Muchun Song <muchun.song@linux.dev>
-R:	Oscar Salvador <osalvador@suse.de>
+M:	Oscar Salvador <osalvador@suse.de>
+R:	David Hildenbrand <david@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -10991,6 +11171,7 @@ F:	fs/hugetlbfs/
 F:	include/linux/hugetlb.h
 F:	include/trace/events/hugetlbfs.h
 F:	mm/hugetlb.c
+F:	mm/hugetlb_cgroup.c
 F:	mm/hugetlb_cma.c
 F:	mm/hugetlb_cma.h
 F:	mm/hugetlb_vmemmap.c
@@ -11246,7 +11427,7 @@ F:	drivers/i2c/busses/i2c-via.c
 F:	drivers/i2c/busses/i2c-viapro.c
 
 I2C/SMBUS INTEL CHT WHISKEY COVE PMIC DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cht-wc.c
@@ -11499,6 +11680,13 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/rc/iguanair.c
 
+IIO ADC HELPERS
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/adc/industrialio-adc.c
+F:	include/linux/iio/adc-helpers.h
+
 IIO BACKEND FRAMEWORK
 M:	Nuno Sa <nuno.sa@analog.com>
 R:	Olivier Moysan <olivier.moysan@foss.st.com>
@@ -11547,7 +11735,9 @@ F:	drivers/iio/common/scmi_sensors/scmi_iio.c
 
 IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@kernel.org>
-R:	Lars-Peter Clausen <lars@metafoo.de>
+R:	David Lechner <dlechner@baylibre.com>
+R:	Nuno Sá <nuno.sa@analog.com>
+R:	Andy Shevchenko <andy@kernel.org>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
@@ -11827,13 +12017,13 @@ S:	Supported
 F:	sound/soc/intel/
 
 INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/intel/atomisp2/pm.c
 
 INTEL ATOMISP2 LED DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/intel/atomisp2/led.c
@@ -11924,7 +12114,7 @@ F:	Documentation/networking/device_drivers/ethernet/intel/
 F:	drivers/net/ethernet/intel/
 F:	drivers/net/ethernet/intel/*/
 F:	include/linux/avf/virtchnl.h
-F:	include/linux/net/intel/iidc.h
+F:	include/linux/net/intel/*/
 
 INTEL ETHERNET PROTOCOL DRIVER FOR RDMA
 M:	Mustafa Ismail <mustafa.ismail@intel.com>
@@ -11951,13 +12141,10 @@ F:	drivers/gpio/gpio-tangier.c
 F:	drivers/gpio/gpio-tangier.h
 
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
-M:	Zhenyu Wang <zhenyuw.linux@gmail.com>
-M:	Zhi Wang <zhi.wang.linux@gmail.com>
-L:	intel-gvt-dev@lists.freedesktop.org
-L:	intel-gfx@lists.freedesktop.org
-S:	Supported
+R:	Zhenyu Wang <zhenyuw.linux@gmail.com>
+R:	Zhi Wang <zhi.wang.linux@gmail.com>
+S:	Odd Fixes
 W:	https://github.com/intel/gvt-linux/wiki
-T:	git https://github.com/intel/gvt-linux.git
 F:	drivers/gpu/drm/i915/gvt/
 
 INTEL HID EVENT DRIVER
@@ -12002,9 +12189,8 @@ F:	drivers/dma/idxd/*
 F:	include/uapi/linux/idxd.h
 
 INTEL IN FIELD SCAN (IFS) DEVICE
-M:	Jithu Joseph <jithu.joseph@intel.com>
+M:	Tony Luck <tony.luck@intel.com>
 R:	Ashok Raj <ashok.raj.linux@gmail.com>
-R:	Tony Luck <tony.luck@intel.com>
 S:	Maintained
 F:	drivers/platform/x86/intel/ifs
 F:	include/trace/events/intel_ifs.h
@@ -12109,7 +12295,7 @@ F:	drivers/crypto/intel/keembay/ocs-hcu.c
 F:	drivers/crypto/intel/keembay/ocs-hcu.h
 
 INTEL LA JOLLA COVE ADAPTER (LJCA) USB I/O EXPANDER DRIVERS
-M:	Wentong Wu <wentong.wu@intel.com>
+M:	Lixu Zhang <lixu.zhang@intel.com>
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 S:	Maintained
 F:	drivers/gpio/gpio-ljca.c
@@ -12143,7 +12329,7 @@ F:	drivers/mfd/intel-m10-bmc*
 F:	include/linux/mfd/intel-m10-bmc.h
 
 INTEL MAX10 BMC SECURE UPDATES
-M:	Peter Colberg <peter.colberg@altera.com>
+M:	Matthew Gerlach <matthew.gerlach@altera.com>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
@@ -12154,7 +12340,7 @@ M:	Andy Shevchenko <andy@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	arch/x86/include/asm/intel-mid.h
-F:	arch/x86/pci/intel_mid_pci.c
+F:	arch/x86/pci/intel_mid.c
 F:	arch/x86/platform/intel-mid/
 F:	drivers/dma/hsu/
 F:	drivers/extcon/extcon-intel-mrfld.c
@@ -12266,6 +12452,7 @@ INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/intel/int3472/
+F:	include/linux/platform_data/x86/int3472.h
 
 INTEL SPEED SELECT TECHNOLOGY
 M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
@@ -12343,8 +12530,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
 F:	drivers/net/wireless/intel/iwlwifi/
 
 INTEL WMI SLIM BOOTLOADER (SBL) FIRMWARE UPDATE DRIVER
-M:	Jithu Joseph <jithu.joseph@intel.com>
-S:	Maintained
+S:	Orphan
 W:	https://slimbootloader.github.io/security/firmware-update.html
 F:	drivers/platform/x86/intel/wmi/sbl-fw-update.c
 
@@ -12488,7 +12674,6 @@ F:	include/linux/iosys-map.h
 
 IO_URING
 M:	Jens Axboe <axboe@kernel.dk>
-M:	Pavel Begunkov <asml.silence@gmail.com>
 L:	io-uring@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.dk/linux-block
@@ -12908,6 +13093,7 @@ F:	include/linux/overflow.h
 F:	include/linux/randomize_kstack.h
 F:	include/linux/ucopysize.h
 F:	kernel/configs/hardening.config
+F:	lib/tests/randstruct_kunit.c
 F:	lib/tests/usercopy_kunit.c
 F:	mm/usercopy.c
 F:	security/Kconfig.hardening
@@ -12923,7 +13109,7 @@ W:	http://kernelnewbies.org/KernelJanitors
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	Chuck Lever <chuck.lever@oracle.com>
 M:	Jeff Layton <jlayton@kernel.org>
-R:	Neil Brown <neilb@suse.de>
+R:	NeilBrown <neil@brown.name>
 R:	Olga Kornievskaia <okorniev@redhat.com>
 R:	Dai Ngo <Dai.Ngo@oracle.com>
 R:	Tom Talpey <tom@talpey.com>
@@ -13059,6 +13245,8 @@ F:	Documentation/virt/kvm/loongarch/
 F:	arch/loongarch/include/asm/kvm*
 F:	arch/loongarch/include/uapi/asm/kvm*
 F:	arch/loongarch/kvm/
+F:	tools/testing/selftests/kvm/*/loongarch/
+F:	tools/testing/selftests/kvm/lib/loongarch/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	Huacai Chen <chenhuacai@kernel.org>
@@ -13086,7 +13274,7 @@ F:	arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE FOR RISC-V (KVM/riscv)
 M:	Anup Patel <anup@brainfault.org>
-R:	Atish Patra <atishp@atishpatra.org>
+R:	Atish Patra <atish.patra@linux.dev>
 L:	kvm@vger.kernel.org
 L:	kvm-riscv@lists.infradead.org
 L:	linux-riscv@lists.infradead.org
@@ -13108,12 +13296,14 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
 F:	Documentation/virt/kvm/s390*
 F:	arch/s390/include/asm/gmap.h
+F:	arch/s390/include/asm/gmap_helpers.h
 F:	arch/s390/include/asm/kvm*
 F:	arch/s390/include/uapi/asm/kvm*
 F:	arch/s390/include/uapi/asm/uvdevice.h
 F:	arch/s390/kernel/uv.c
 F:	arch/s390/kvm/
 F:	arch/s390/mm/gmap.c
+F:	arch/s390/mm/gmap_helpers.c
 F:	drivers/s390/char/uvdevice.c
 F:	tools/testing/selftests/drivers/s390x/uvdevice/
 F:	tools/testing/selftests/kvm/*/s390/
@@ -13154,6 +13344,18 @@ F:	include/linux/kexec.h
 F:	include/uapi/linux/kexec.h
 F:	kernel/kexec*
 
+KEXEC HANDOVER (KHO)
+M:	Alexander Graf <graf@amazon.com>
+M:	Mike Rapoport <rppt@kernel.org>
+M:	Changyuan Lyu <changyuanl@google.com>
+L:	kexec@lists.infradead.org
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	Documentation/admin-guide/mm/kho.rst
+F:	Documentation/core-api/kho/*
+F:	include/linux/kexec_handover.h
+F:	kernel/kexec_handover.c
+
 KEYS-ENCRYPTED
 M:	Mimi Zohar <zohar@linux.ibm.com>
 L:	linux-integrity@vger.kernel.org
@@ -13481,7 +13683,7 @@ S:	Maintained
 F:	drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
 
 LETSKETCH HID TABLET DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
@@ -13531,7 +13733,7 @@ F:	drivers/ata/sata_gemini.c
 F:	drivers/ata/sata_gemini.h
 
 LIBATA SATA AHCI PLATFORM devices support
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/ahci_platform.c
@@ -13601,7 +13803,7 @@ M:	Oliver O'Halloran <oohall@gmail.com>
 L:	nvdimm@lists.linux.dev
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
-F:	Documentation/devicetree/bindings/pmem/pmem-region.txt
+F:	Documentation/devicetree/bindings/pmem/pmem-region.yaml
 F:	drivers/nvdimm/of_pmem.c
 
 LIBNVDIMM: NON-VOLATILE MEMORY DEVICE SUBSYSTEM
@@ -13661,7 +13863,6 @@ M:	Madhavan Srinivasan <maddy@linux.ibm.com>
 M:	Michael Ellerman <mpe@ellerman.id.au>
 R:	Nicholas Piggin <npiggin@gmail.com>
 R:	Christophe Leroy <christophe.leroy@csgroup.eu>
-R:	Naveen N Rao <naveen@kernel.org>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 W:	https://github.com/linuxppc/wiki/wiki
@@ -13742,7 +13943,7 @@ M:	Luc Maranget <luc.maranget@inria.fr>
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 R:	Akira Yokosawa <akiyks@gmail.com>
 R:	Daniel Lustig <dlustig@nvidia.com>
-R:	Joel Fernandes <joel@joelfernandes.org>
+R:	Joel Fernandes <joelagnelf@nvidia.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-arch@vger.kernel.org
 L:	lkmm@lists.linux.dev
@@ -13902,7 +14103,7 @@ F:	Documentation/admin-guide/ldm.rst
 F:	block/partitions/ldm.*
 
 LOGITECH HID GAMING KEYBOARDS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
@@ -13947,6 +14148,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
 F:	drivers/i2c/busses/i2c-ls2x.c
 
+LOONGSON PWM DRIVER
+M:	Binbin Zhou <zhoubinbin@loongson.cn>
+L:	linux-pwm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml
+F:	drivers/pwm/pwm-loongson.c
+
 LOONGSON-2 SOC SERIES CLOCK DRIVER
 M:	Yinbo Zhu <zhuyinbo@loongson.cn>
 L:	linux-clk@vger.kernel.org
@@ -14018,6 +14226,15 @@ L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
+LT3074 HARDWARE MONITOR DRIVER
+M:	Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
+F:	Documentation/hwmon/lt3074.rst
+F:	drivers/hwmon/pmbus/lt3074.c
+
 LTC1660 DAC DRIVER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
 L:	linux-iio@vger.kernel.org
@@ -14291,7 +14508,7 @@ MARVELL ARMADA 3700 SERIAL DRIVER
 M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
-F:	Documentation/devicetree/bindings/serial/mvebu-uart.txt
+F:	Documentation/devicetree/bindings/serial/marvell,armada-3700-uart.yaml
 F:	drivers/tty/serial/mvebu-uart.c
 
 MARVELL ARMADA DRM SUPPORT
@@ -14304,9 +14521,8 @@ F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 
 MARVELL CRYPTO DRIVER
-M:	Boris Brezillon <bbrezillon@kernel.org>
-M:	Arnaud Ebalard <arno@natisbad.org>
 M:	Srujana Challa <schalla@marvell.com>
+M:	Bharat Bhushan <bbhushan2@marvell.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 F:	drivers/crypto/marvell/
@@ -14486,7 +14702,7 @@ M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/max2175.txt
+F:	Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
 F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
 F:	include/uapi/linux/max2175.h
@@ -14569,7 +14785,7 @@ F:	Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
 F:	drivers/power/supply/max17040_battery.c
 
 MAXIM MAX17042 FAMILY FUEL GAUGE DRIVERS
-R:	Hans de Goede <hdegoede@redhat.com>
+R:	Hans de Goede <hansg@kernel.org>
 R:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Marek Szyprowski <m.szyprowski@samsung.com>
 R:	Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
@@ -14613,6 +14829,16 @@ F:	Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
 F:	drivers/mfd/max77714.c
 F:	include/linux/mfd/max77714.h
 
+MAXIM MAX77759 PMIC MFD DRIVER
+M:	André Draszik <andre.draszik@linaro.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/*/maxim,max77759*.yaml
+F:	drivers/gpio/gpio-max77759.c
+F:	drivers/mfd/max77759.c
+F:	drivers/nvmem/max77759-nvmem.c
+F:	include/linux/mfd/max77759.h
+
 MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
 M:	Javier Martinez Canillas <javier@dowhile0.org>
 L:	linux-kernel@vger.kernel.org
@@ -14648,7 +14874,6 @@ F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77693.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77705*.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77843.yaml
-F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
 F:	drivers/leds/leds-max77705.c
 F:	drivers/*/*max77843.c
 F:	drivers/*/max14577*.c
@@ -14676,6 +14901,7 @@ MAXLINEAR ETHERNET PHY DRIVER
 M:	Xu Liang <lxu@maxlinear.com>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	drivers/net/phy/mxl-86110.c
 F:	drivers/net/phy/mxl-gpy.c
 
 MCAN MMIO DEVICE DRIVER
@@ -14702,7 +14928,7 @@ F:	drivers/hid/hid-mcp2221.c
 
 MCP251XFD SPI-CAN NETWORK DRIVER
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 R:	Thomas Kopp <thomas.kopp@microchip.com>
 L:	linux-can@vger.kernel.org
 S:	Maintained
@@ -14813,7 +15039,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
 F:	Documentation/admin-guide/media/imx.rst
-F:	Documentation/devicetree/bindings/media/imx.txt
+F:	Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml
 F:	drivers/staging/media/imx/
 F:	include/linux/imx-media.h
 F:	include/media/imx.h
@@ -14934,7 +15160,7 @@ F:	Documentation/devicetree/bindings/media/renesas,csi2.yaml
 F:	Documentation/devicetree/bindings/media/renesas,isp.yaml
 F:	Documentation/devicetree/bindings/media/renesas,vin.yaml
 F:	drivers/media/platform/renesas/rcar-csi2.c
-F:	drivers/media/platform/renesas/rcar-isp.c
+F:	drivers/media/platform/renesas/rcar-isp/
 F:	drivers/media/platform/renesas/rcar-vin/
 
 MEDIA DRIVERS FOR RENESAS - VSP1
@@ -15057,6 +15283,7 @@ M:	Qingfang Deng <dqfext@gmail.com>
 M:	SkyLake Huang <SkyLake.Huang@mediatek.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	drivers/net/phy/mediatek/mtk-2p5ge.c
 F:	drivers/net/phy/mediatek/mtk-ge-soc.c
 F:	drivers/net/phy/mediatek/mtk-phy-lib.c
 F:	drivers/net/phy/mediatek/mtk-ge.c
@@ -15325,6 +15552,7 @@ F:	drivers/net/ethernet/mellanox/mlx4/en_*
 MELLANOX ETHERNET DRIVER (mlx5e)
 M:	Saeed Mahameed <saeedm@nvidia.com>
 M:	Tariq Toukan <tariqt@nvidia.com>
+M:	Mark Bloch <mbloch@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	https://www.nvidia.com/networking/
@@ -15360,7 +15588,7 @@ Q:	https://patchwork.kernel.org/project/netdevbpf/list/
 F:	drivers/net/ethernet/mellanox/mlxfw/
 
 MELLANOX HARDWARE PLATFORM SUPPORT
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 M:	Vadim Pasternak <vadimp@nvidia.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -15394,6 +15622,7 @@ MELLANOX MLX5 core VPI driver
 M:	Saeed Mahameed <saeedm@nvidia.com>
 M:	Leon Romanovsky <leonro@nvidia.com>
 M:	Tariq Toukan <tariqt@nvidia.com>
+M:	Mark Bloch <mbloch@nvidia.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 S:	Maintained
@@ -15451,10 +15680,16 @@ MEMBLOCK AND MEMORY MANAGEMENT INITIALIZATION
 M:	Mike Rapoport <rppt@kernel.org>
 L:	linux-mm@kvack.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock.git for-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock.git fixes
 F:	Documentation/core-api/boot-time-mm.rst
+F:	Documentation/core-api/kho/bindings/memblock/*
 F:	include/linux/memblock.h
+F:	mm/bootmem_info.c
 F:	mm/memblock.c
+F:	mm/memtest.c
 F:	mm/mm_init.c
+F:	mm/rodata_test.c
 F:	tools/testing/memblock/
 
 MEMORY ALLOCATION PROFILING
@@ -15509,7 +15744,6 @@ F:	Documentation/admin-guide/mm/
 F:	Documentation/mm/
 F:	include/linux/gfp.h
 F:	include/linux/gfp_types.h
-F:	include/linux/memfd.h
 F:	include/linux/memory_hotplug.h
 F:	include/linux/memory-tiers.h
 F:	include/linux/mempolicy.h
@@ -15542,6 +15776,7 @@ F:	include/linux/mm.h
 F:	include/linux/mm_*.h
 F:	include/linux/mmdebug.h
 F:	include/linux/pagewalk.h
+F:	kernel/fork.c
 F:	mm/Kconfig
 F:	mm/debug.c
 F:	mm/init-mm.c
@@ -15568,6 +15803,10 @@ S:	Maintained
 W:	http://www.linux-mm.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
 F:	mm/gup.c
+F:	mm/gup_test.c
+F:	mm/gup_test.h
+F:	tools/testing/selftests/mm/gup_longterm.c
+F:	tools/testing/selftests/mm/gup_test.c
 
 MEMORY MANAGEMENT - KSM (Kernel Samepage Merging)
 M:	Andrew Morton <akpm@linux-foundation.org>
@@ -15594,6 +15833,7 @@ R:	Rakie Kim <rakie.kim@sk.com>
 R:	Byungchul Park <byungchul@sk.com>
 R:	Gregory Price <gourry@gourry.net>
 R:	Ying Huang <ying.huang@linux.alibaba.com>
+R:	Alistair Popple <apopple@nvidia.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 W:	http://www.linux-mm.org
@@ -15614,6 +15854,17 @@ F:	mm/numa.c
 F:	mm/numa_emulation.c
 F:	mm/numa_memblks.c
 
+MEMORY MANAGEMENT - OOM KILLER
+M:	Michal Hocko <mhocko@suse.com>
+R:	David Rientjes <rientjes@google.com>
+R:	Shakeel Butt <shakeel.butt@linux.dev>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/oom.h
+F:	include/trace/events/oom.h
+F:	include/uapi/linux/oom.h
+F:	mm/oom_kill.c
+
 MEMORY MANAGEMENT - PAGE ALLOCATOR
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Vlastimil Babka <vbabka@suse.cz>
@@ -15628,8 +15879,17 @@ F:	include/linux/compaction.h
 F:	include/linux/gfp.h
 F:	include/linux/page-isolation.h
 F:	mm/compaction.c
+F:	mm/debug_page_alloc.c
+F:	mm/fail_page_alloc.c
 F:	mm/page_alloc.c
+F:	mm/page_ext.c
+F:	mm/page_frag_cache.c
 F:	mm/page_isolation.c
+F:	mm/page_owner.c
+F:	mm/page_poison.c
+F:	mm/page_reporting.c
+F:	mm/show_mem.c
+F:	mm/shuffle.c
 
 MEMORY MANAGEMENT - RECLAIM
 M:	Andrew Morton <akpm@linux-foundation.org>
@@ -15643,6 +15903,7 @@ L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/pt_reclaim.c
 F:	mm/vmscan.c
+F:	mm/workingset.c
 
 MEMORY MANAGEMENT - RMAP (REVERSE MAPPING)
 M:	Andrew Morton <akpm@linux-foundation.org>
@@ -15655,6 +15916,7 @@ R:	Harry Yoo <harry.yoo@oracle.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/rmap.h
+F:	mm/page_vma_mapped.c
 F:	mm/rmap.c
 
 MEMORY MANAGEMENT - SECRETMEM
@@ -15665,16 +15927,36 @@ S:	Maintained
 F:	include/linux/secretmem.h
 F:	mm/secretmem.c
 
+MEMORY MANAGEMENT - SWAP
+M:	Andrew Morton <akpm@linux-foundation.org>
+R:	Kemeng Shi <shikemeng@huaweicloud.com>
+R:	Kairui Song <kasong@tencent.com>
+R:	Nhat Pham <nphamcs@gmail.com>
+R:	Baoquan He <bhe@redhat.com>
+R:	Barry Song <baohua@kernel.org>
+R:	Chris Li <chrisl@kernel.org>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/swap.h
+F:	include/linux/swapfile.h
+F:	include/linux/swapops.h
+F:	mm/page_io.c
+F:	mm/swap.c
+F:	mm/swap.h
+F:	mm/swap_state.c
+F:	mm/swapfile.c
+
 MEMORY MANAGEMENT - THP (TRANSPARENT HUGE PAGE)
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	David Hildenbrand <david@redhat.com>
+M:	Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
 R:	Zi Yan <ziy@nvidia.com>
 R:	Baolin Wang <baolin.wang@linux.alibaba.com>
-R:	Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
 R:	Liam R. Howlett <Liam.Howlett@oracle.com>
 R:	Nico Pache <npache@redhat.com>
 R:	Ryan Roberts <ryan.roberts@arm.com>
 R:	Dev Jain <dev.jain@arm.com>
+R:	Barry Song <baohua@kernel.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 W:	http://www.linux-mm.org
@@ -15702,6 +15984,19 @@ F:	include/uapi/linux/userfaultfd.h
 F:	mm/userfaultfd.c
 F:	tools/testing/selftests/mm/uffd-*.[ch]
 
+MEMORY MANAGEMENT - RUST
+M:	Alice Ryhl <aliceryhl@google.com>
+R:	Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
+R:	Liam R. Howlett <Liam.Howlett@oracle.com>
+L:	linux-mm@kvack.org
+L:	rust-for-linux@vger.kernel.org
+S:	Maintained
+W:	http://www.linux-mm.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
+F:	rust/helpers/mm.c
+F:	rust/kernel/mm.rs
+F:	rust/kernel/mm/
+
 MEMORY MAPPING
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Liam R. Howlett <Liam.Howlett@oracle.com>
@@ -15714,14 +16009,20 @@ S:	Maintained
 W:	http://www.linux-mm.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
 F:	include/trace/events/mmap.h
+F:	mm/mincore.c
 F:	mm/mlock.c
 F:	mm/mmap.c
 F:	mm/mprotect.c
 F:	mm/mremap.c
 F:	mm/mseal.c
+F:	mm/msync.c
+F:	mm/nommu.c
 F:	mm/vma.c
 F:	mm/vma.h
+F:	mm/vma_exec.c
+F:	mm/vma_init.c
 F:	mm/vma_internal.h
+F:	tools/testing/selftests/mm/merge.c
 F:	tools/testing/vma/
 
 MEMORY MAPPING - LOCKING
@@ -15849,7 +16150,7 @@ F:	arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
 F:	arch/arm64/boot/dts/marvell/armada-3720-uDPU.*
 
 MHI BUS
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	mhi@lists.linux.dev
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -16278,7 +16579,7 @@ S:	Maintained
 F:	drivers/platform/surface/surface_gpe.c
 
 MICROSOFT SURFACE HARDWARE PLATFORM SUPPORT
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 M:	Maximilian Luz <luzmaximilian@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -16425,7 +16726,9 @@ F:	Documentation/devicetree/bindings/*/loongson,ls1*.yaml
 F:	arch/mips/include/asm/mach-loongson32/
 F:	arch/mips/loongson32/
 F:	drivers/*/*loongson1*
+F:	drivers/mtd/nand/raw/loongson1-nand-controller.c
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
+F:	sound/soc/loongson/loongson1_ac97.c
 
 MIPS/LOONGSON2EF ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
@@ -16485,6 +16788,7 @@ L:	linux-mm@kvack.org
 S:	Maintained
 F:	arch/*/include/asm/tlb.h
 F:	include/asm-generic/tlb.h
+F:	include/trace/events/tlb.h
 F:	mm/mmu_gather.c
 
 MN88472 MEDIA DRIVER
@@ -16520,8 +16824,8 @@ F:	include/dt-bindings/clock/mobileye,eyeq5-clk.h
 MODULE SUPPORT
 M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Petr Pavlu <petr.pavlu@suse.com>
+M:	Daniel Gomez <da.gomez@kernel.org>
 R:	Sami Tolvanen <samitolvanen@google.com>
-R:	Daniel Gomez <da.gomez@samsung.com>
 L:	linux-modules@vger.kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
@@ -16696,7 +17000,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
+F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
 F:	include/media/i2c/mt9v032.h
 
@@ -16734,7 +17038,7 @@ F:	include/uapi/linux/mmc/
 
 MULTIPLEXER SUBSYSTEM
 M:	Peter Rosin <peda@axentia.se>
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/ABI/testing/sysfs-class-mux*
 F:	Documentation/devicetree/bindings/mux/
 F:	drivers/mux/
@@ -16920,10 +17224,10 @@ F:	drivers/rtc/rtc-ntxec.c
 F:	include/linux/mfd/ntxec.h
 
 NETRONOME ETHERNET DRIVERS
-M:	Louis Peens <louis.peens@corigine.com>
 R:	Jakub Kicinski <kuba@kernel.org>
+R:	Simon Horman <horms@kernel.org>
 L:	oss-drivers@corigine.com
-S:	Maintained
+S:	Odd Fixes
 F:	drivers/net/ethernet/netronome/
 
 NETWORK BLOCK DEVICE (NBD)
@@ -17080,6 +17384,7 @@ F:	include/linux/ethtool.h
 F:	include/linux/framer/framer-provider.h
 F:	include/linux/framer/framer.h
 F:	include/linux/in.h
+F:	include/linux/in6.h
 F:	include/linux/indirect_call_wrapper.h
 F:	include/linux/inet.h
 F:	include/linux/inet_diag.h
@@ -17127,6 +17432,7 @@ X:	net/ceph/
 X:	net/mac80211/
 X:	net/rfkill/
 X:	net/wireless/
+X:	tools/testing/selftests/net/can/
 
 NETWORKING [IPSEC]
 M:	Steffen Klassert <steffen.klassert@secunet.com>
@@ -17229,7 +17535,7 @@ F:	tools/testing/selftests/net/srv6*
 NETWORKING [TCP]
 M:	Eric Dumazet <edumazet@google.com>
 M:	Neal Cardwell <ncardwell@google.com>
-R:	Kuniyuki Iwashima <kuniyu@amazon.com>
+R:	Kuniyuki Iwashima <kuniyu@google.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/net_cachelines/tcp_sock.rst
@@ -17259,7 +17565,7 @@ F:	net/tls/*
 
 NETWORKING [SOCKETS]
 M:	Eric Dumazet <edumazet@google.com>
-M:	Kuniyuki Iwashima <kuniyu@amazon.com>
+M:	Kuniyuki Iwashima <kuniyu@google.com>
 M:	Paolo Abeni <pabeni@redhat.com>
 M:	Willem de Bruijn <willemb@google.com>
 S:	Maintained
@@ -17274,7 +17580,7 @@ F:	net/core/scm.c
 F:	net/socket.c
 
 NETWORKING [UNIX SOCKETS]
-M:	Kuniyuki Iwashima <kuniyu@amazon.com>
+M:	Kuniyuki Iwashima <kuniyu@google.com>
 S:	Maintained
 F:	include/net/af_unix.h
 F:	include/net/netns/unix.h
@@ -17419,6 +17725,7 @@ M:	Pavel Machek <pavel@kernel.org>
 M:	Sakari Ailus <sakari.ailus@iki.fi>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
 F:	drivers/media/i2c/ad5820.c
 F:	drivers/media/i2c/et8ek8
 
@@ -17441,7 +17748,7 @@ F:	tools/include/nolibc/
 F:	tools/testing/selftests/nolibc/
 
 NOVATEK NVT-TS I2C TOUCHSCREEN DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml
@@ -17509,6 +17816,13 @@ F:	drivers/nubus/
 F:	include/linux/nubus.h
 F:	include/uapi/linux/nubus.h
 
+NUVOTON NCT7201 IIO DRIVER
+M:	Eason Yang <j2anfernee@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
+F:	drivers/iio/adc/nct7201.c
+
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev@vger.kernel.org
@@ -18014,6 +18328,23 @@ T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 F:	drivers/media/i2c/ov02a10.c
 
+OMNIVISION OV02C10 SENSOR DRIVER
+M:	Hans de Goede <hansg@kernel.org>
+R:	Bryan O'Donoghue <bod@kernel.org>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media.git
+F:	drivers/media/i2c/ov02c10.c
+
+OMNIVISION OV02E10 SENSOR DRIVER
+M:	Bryan O'Donoghue <bod@kernel.org>
+M:	Hans de Goede <hansg@kernel.org>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
+F:	drivers/media/i2c/ov02e10.c
+
 OMNIVISION OV08D10 SENSOR DRIVER
 M:	Jimmy Su <jimmy.su@intel.com>
 L:	linux-media@vger.kernel.org
@@ -18136,7 +18467,7 @@ OMNIVISION OV7670 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/ov7670.txt
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
 F:	drivers/media/i2c/ov7670.c
 
 OMNIVISION OV772x SENSOR DRIVER
@@ -18152,7 +18483,7 @@ OMNIVISION OV7740 SENSOR DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
 F:	drivers/media/i2c/ov7740.c
 
 OMNIVISION OV8856 SENSOR DRIVER
@@ -18193,7 +18524,7 @@ R:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/ov9650.txt
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
 F:	drivers/media/i2c/ov9650.c
 
 OMNIVISION OV9734 SENSOR DRIVER
@@ -18218,12 +18549,13 @@ S:	Maintained
 F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
-ONEXPLAYER FAN DRIVER
+ONEXPLAYER PLATFORM EC DRIVER
+M:	Antheas Kapenekakis <lkml@antheas.dev>
 M:	Derek John Clark <derekjohn.clark@gmail.com>
 M:	Joaquín Ignacio Aramendía <samsagax@gmail.com>
-L:	linux-hwmon@vger.kernel.org
+L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/hwmon/oxp-sensors.c
+F:	drivers/platform/x86/oxpec.c
 
 ONIE TLV NVMEM LAYOUT DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
@@ -18339,6 +18671,18 @@ F:	arch/openrisc/
 F:	drivers/irqchip/irq-ompic.c
 F:	drivers/irqchip/irq-or1k-*
 
+OPENVPN DATA CHANNEL OFFLOAD
+M:	Antonio Quartulli <antonio@openvpn.net>
+R:	Sabrina Dubroca <sd@queasysnail.net>
+L:	openvpn-devel@lists.sourceforge.net (subscribers-only)
+L:	netdev@vger.kernel.org
+S:	Supported
+T:	git https://github.com/OpenVPN/ovpn-net-next.git
+F:	Documentation/netlink/specs/ovpn.yaml
+F:	drivers/net/ovpn/
+F:	include/uapi/linux/ovpn.h
+F:	tools/testing/selftests/net/ovpn/
+
 OPENVSWITCH
 M:	Aaron Conole <aconole@redhat.com>
 M:	Eelco Chaudron <echaudro@redhat.com>
@@ -18363,6 +18707,7 @@ F:	Documentation/devicetree/bindings/opp/
 F:	Documentation/power/opp.rst
 F:	drivers/opp/
 F:	include/linux/pm_opp.h
+F:	rust/kernel/opp.rs
 
 OPL4 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -18398,6 +18743,7 @@ S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
 F:	drivers/media/i2c/ov2659.c
 F:	include/media/i2c/ov2659.h
 
@@ -18575,6 +18921,13 @@ S:	Maintained
 F:	Documentation/hwmon/pc87427.rst
 F:	drivers/hwmon/pc87427.c
 
+MAX77705 HARDWARE MONITORING DRIVER
+M:	Dzmitry Sankouski <dsankouski@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/max77705.rst
+F:	drivers/hwmon/max77705-hwmon.c
+
 PCA9532 LED DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
 S:	Maintained
@@ -18618,7 +18971,7 @@ M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/pci-armada8k.txt
+F:	Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
 F:	drivers/pci/controller/dwc/pcie-armada8k.c
 
 PCI DRIVER FOR CADENCE PCIE IP
@@ -18738,6 +19091,7 @@ M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 S:	Maintained
+F:	Documentation/PCI/controller/rcar-pcie-firmware.rst
 F:	Documentation/devicetree/bindings/pci/*rcar*
 F:	drivers/pci/controller/*rcar*
 F:	drivers/pci/controller/dwc/*rcar*
@@ -18752,7 +19106,7 @@ F:	drivers/pci/controller/dwc/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -18775,7 +19129,7 @@ PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+F:	Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml
 F:	drivers/pci/controller/pci-v3-semi.c
 
 PCI DRIVER FOR XILINX VERSAL CPM
@@ -18787,8 +19141,8 @@ F:	Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
 F:	drivers/pci/controller/pcie-xilinx-cpm.c
 
 PCI ENDPOINT SUBSYSTEM
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-M:	Krzysztof Wilczyński <kw@linux.com>
+M:	Manivannan Sadhasivam <mani@kernel.org>
+M:	Krzysztof Wilczyński <kwilczynski@kernel.org>
 R:	Kishon Vijay Abraham I <kishon@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
@@ -18826,7 +19180,7 @@ PCI MSI DRIVER FOR ALTERA MSI IP
 M:	Joyce Ooi <joyce.ooi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/pci/altr,msi-controller.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
 F:	drivers/pci/controller/pcie-altera-msi.c
 
 PCI MSI DRIVER FOR APPLIEDMICRO XGENE
@@ -18839,8 +19193,8 @@ F:	drivers/pci/controller/pci-xgene-msi.c
 
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lpieralisi@kernel.org>
-M:	Krzysztof Wilczyński <kw@linux.com>
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Krzysztof Wilczyński <kwilczynski@kernel.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 R:	Rob Herring <robh@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
@@ -18848,6 +19202,7 @@ Q:	https://patchwork.kernel.org/project/linux-pci/list/
 B:	https://bugzilla.kernel.org
 C:	irc://irc.oftc.net/linux-pci
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git
+F:	Documentation/ABI/testing/debugfs-pcie-ptm
 F:	Documentation/devicetree/bindings/pci/
 F:	drivers/pci/controller/
 F:	drivers/pci/pci-bridge-emul.c
@@ -18996,7 +19351,7 @@ F:	Documentation/devicetree/bindings/pci/microchip*
 F:	drivers/pci/controller/plda/*microchip*
 
 PCIE DRIVER FOR QUALCOMM MSM
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -19032,7 +19387,7 @@ F:	Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
 F:	drivers/pci/controller/plda/pcie-starfive.c
 
 PCIE ENDPOINT DRIVER FOR QUALCOMM
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -19063,7 +19418,7 @@ F:	crypto/pcrypt.c
 F:	include/crypto/pcrypt.h
 
 PDS DSC VIRTIO DATA PATH ACCELERATOR
-R:	Shannon Nelson <shannon.nelson@amd.com>
+R:	Brett Creeley <brett.creeley@amd.com>
 F:	drivers/vdpa/pds/
 
 PECI HARDWARE MONITORING DRIVERS
@@ -19085,7 +19440,6 @@ F:	include/linux/peci-cpu.h
 F:	include/linux/peci.h
 
 PENSANDO ETHERNET DRIVERS
-M:	Shannon Nelson <shannon.nelson@amd.com>
 M:	Brett Creeley <brett.creeley@amd.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -19095,7 +19449,7 @@ F:	drivers/net/ethernet/pensando/
 PER-CPU MEMORY ALLOCATOR
 M:	Dennis Zhou <dennis@kernel.org>
 M:	Tejun Heo <tj@kernel.org>
-M:	Christoph Lameter <cl@linux.com>
+M:	Christoph Lameter <cl@gentwo.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
@@ -19250,8 +19604,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
 F:	drivers/pinctrl/intel/
 
 PIN CONTROLLER - KEEMBAY
-M:	Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
-S:	Supported
+S:	Orphan
 F:	drivers/pinctrl/pinctrl-keembay*
 
 PIN CONTROLLER - MEDIATEK
@@ -19422,6 +19775,12 @@ S:	Maintained
 F:	drivers/pnp/
 F:	include/linux/pnp.h
 
+PORTWELL EC DRIVER
+M:	Yen-Chi Huang <jesse.huang@portwell.com.tw>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/portwell-ec.c
+
 POSIX CLOCKS and TIMERS
 M:	Anna-Maria Behnsen <anna-maria@linutronix.de>
 M:	Frederic Weisbecker <frederic@kernel.org>
@@ -19467,6 +19826,7 @@ M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lpieralisi@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/arm/psci.yaml
 F:	drivers/firmware/psci/
 F:	include/linux/psci.h
 F:	include/uapi/linux/psci.h
@@ -19797,21 +20157,15 @@ S:	Supported
 F:	Documentation/devicetree/bindings/soc/qcom/qcom,apr*
 F:	Documentation/devicetree/bindings/sound/qcom,*
 F:	drivers/soc/qcom/apr.c
-F:	include/dt-bindings/sound/qcom,wcd9335.h
-F:	include/dt-bindings/sound/qcom,wcd934x.h
-F:	sound/soc/codecs/lpass-rx-macro.*
-F:	sound/soc/codecs/lpass-tx-macro.*
-F:	sound/soc/codecs/lpass-va-macro.c
-F:	sound/soc/codecs/lpass-wsa-macro.*
+F:	drivers/soundwire/qcom.c
+F:	include/dt-bindings/sound/qcom,wcd93*
+F:	sound/soc/codecs/lpass-*.*
 F:	sound/soc/codecs/msm8916-wcd-analog.c
 F:	sound/soc/codecs/msm8916-wcd-digital.c
 F:	sound/soc/codecs/wcd-clsh-v2.*
 F:	sound/soc/codecs/wcd-mbhc-v2.*
-F:	sound/soc/codecs/wcd9335.*
-F:	sound/soc/codecs/wcd934x.c
-F:	sound/soc/codecs/wsa881x.c
-F:	sound/soc/codecs/wsa883x.c
-F:	sound/soc/codecs/wsa884x.c
+F:	sound/soc/codecs/wcd93*.*
+F:	sound/soc/codecs/wsa88*.*
 F:	sound/soc/qcom/
 
 QCOM EMBEDDED USB DEBUGGER (EUD)
@@ -20144,7 +20498,7 @@ F:	drivers/soc/qcom/icc-bwmon.c
 F:	drivers/soc/qcom/trace_icc-bwmon.h
 
 QUALCOMM IOMMU
-M:	Rob Clark <robdclark@gmail.com>
+M:	Rob Clark <robin.clark@oss.qualcomm.com>
 L:	iommu@lists.linux.dev
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -20153,7 +20507,7 @@ F:	drivers/iommu/arm/arm-smmu/arm-smmu-qcom*
 F:	drivers/iommu/msm_iommu*
 
 QUALCOMM IPC ROUTER (QRTR) DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	include/trace/events/qrtr.h
@@ -20161,7 +20515,7 @@ F:	include/uapi/linux/qrtr.h
 F:	net/qrtr/
 
 QUALCOMM IPCC MAILBOX DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -20187,7 +20541,8 @@ F:	drivers/regulator/vqmmc-ipq4019-regulator.c
 QUALCOMM IRIS VIDEO ACCELERATOR DRIVER
 M:	Vikash Garodia <quic_vgarodia@quicinc.com>
 M:	Dikshita Agarwal <quic_dikshita@quicinc.com>
-R:	Abhinav Kumar <quic_abhinavk@quicinc.com>
+R:	Abhinav Kumar <abhinav.kumar@linux.dev>
+R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -20195,7 +20550,7 @@ F:	Documentation/devicetree/bindings/media/qcom,*-iris.yaml
 F:	drivers/media/platform/qcom/iris/
 
 QUALCOMM NAND CONTROLLER DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-mtd@lists.infradead.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -20249,8 +20604,8 @@ F:	Documentation/devicetree/bindings/usb/qcom,pmic-*.yaml
 F:	drivers/usb/typec/tcpm/qcom/
 
 QUALCOMM VENUS VIDEO ACCELERATOR DRIVER
-M:	Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
 M:	Vikash Garodia <quic_vgarodia@quicinc.com>
+M:	Dikshita Agarwal <quic_dikshita@quicinc.com>
 R:	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
 L:	linux-media@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
@@ -20499,11 +20854,14 @@ F:	tools/testing/selftests/net/rds/
 RDT - RESOURCE ALLOCATION
 M:	Tony Luck <tony.luck@intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+R:	Dave Martin <Dave.Martin@arm.com>
+R:	James Morse <james.morse@arm.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	Documentation/arch/x86/resctrl*
+F:	Documentation/filesystems/resctrl.rst
 F:	arch/x86/include/asm/resctrl.h
 F:	arch/x86/kernel/cpu/resctrl/
+F:	fs/resctrl/
 F:	include/linux/resctrl*.h
 F:	tools/testing/selftests/resctrl/
 
@@ -20511,14 +20869,14 @@ READ-COPY UPDATE (RCU)
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 M:	Frederic Weisbecker <frederic@kernel.org> (kernel/rcu/tree_nocb.h)
 M:	Neeraj Upadhyay <neeraj.upadhyay@kernel.org> (kernel/rcu/tasks.h)
-M:	Joel Fernandes <joel@joelfernandes.org>
+M:	Joel Fernandes <joelagnelf@nvidia.com>
 M:	Josh Triplett <josh@joshtriplett.org>
 M:	Boqun Feng <boqun.feng@gmail.com>
 M:	Uladzislau Rezki <urezki@gmail.com>
 R:	Steven Rostedt <rostedt@goodmis.org>
 R:	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
 R:	Lai Jiangshan <jiangshanlai@gmail.com>
-R:	Zqiang <qiang.zhang1211@gmail.com>
+R:	Zqiang <qiang.zhang@linux.dev>
 L:	rcu@vger.kernel.org
 S:	Supported
 W:	http://www.rdrop.com/users/paulmck/RCU/
@@ -20833,6 +21191,22 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml
 F:	drivers/usb/gadget/udc/renesas_usbf.c
 
+RENESAS RZ/V2H(P) DWMAC GBETH GLUE LAYER DRIVER
+M:	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+L:	netdev@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-renesas-gbeth.c
+
+RENESAS RZ/V2H(P) USB2PHY PORT RESET DRIVER
+M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+M:	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml
+F:	drivers/reset/reset-rzv2h-usb2phy.c
+
 RENESAS RZ/V2M I2C DRIVER
 M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 L:	linux-i2c@vger.kernel.org
@@ -21013,7 +21387,7 @@ F:	arch/riscv/boot/dts/sifive/
 F:	arch/riscv/boot/dts/starfive/
 
 RISC-V PMU DRIVERS
-M:	Atish Patra <atishp@atishpatra.org>
+M:	Atish Patra <atish.patra@linux.dev>
 R:	Anup Patel <anup@brainfault.org>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
@@ -21034,7 +21408,7 @@ N:	spacemit
 K:	spacemit
 
 RISC-V THEAD SoC SUPPORT
-M:	Drew Fustini <drew@pdp7.com>
+M:	Drew Fustini <fustini@kernel.org>
 M:	Guo Ren <guoren@kernel.org>
 M:	Fu Wei <wefu@redhat.com>
 L:	linux-riscv@lists.infradead.org
@@ -21045,6 +21419,7 @@ F:	Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml
 F:	Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
 F:	Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
 F:	Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
+F:	Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml
 F:	arch/riscv/boot/dts/thead/
 F:	drivers/clk/thead/clk-th1520-ap.c
 F:	drivers/firmware/thead,th1520-aon.c
@@ -21052,8 +21427,10 @@ F:	drivers/mailbox/mailbox-th1520.c
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
 F:	drivers/pinctrl/pinctrl-th1520.c
 F:	drivers/pmdomain/thead/
+F:	drivers/reset/reset-th1520.c
 F:	include/dt-bindings/clock/thead,th1520-clk-ap.h
 F:	include/dt-bindings/power/thead,th1520-power.h
+F:	include/dt-bindings/reset/thead,th1520-reset.h
 F:	include/linux/firmware/thead/thead,th1520-aon.h
 
 RNBD BLOCK DRIVERS
@@ -21130,6 +21507,13 @@ F:	Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml
 F:	sound/soc/codecs/rk3308_codec.c
 F:	sound/soc/codecs/rk3308_codec.h
 
+ROCKCHIP SAI DRIVER
+M:	Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
+L:	linux-rockchip@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/rockchip,rk3576-sai.yaml
+F:	sound/soc/rockchip/rockchip_sai.*
+
 ROCKCHIP VIDEO DECODER DRIVER
 M:	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
 L:	linux-media@vger.kernel.org
@@ -21161,6 +21545,11 @@ S:	Supported
 F:	drivers/power/supply/bd99954-charger.c
 F:	drivers/power/supply/bd99954-charger.h
 
+ROHM BD79124 ADC / GPO IC
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+S:	Supported
+F:	drivers/iio/adc/rohm-bd79124.c
+
 ROHM BH1745 COLOUR SENSOR
 M:	Mudit Sharma <muditsharma.info@gmail.com>
 L:	linux-iio@vger.kernel.org
@@ -21220,6 +21609,7 @@ F:	include/linux/mfd/rohm-bd71828.h
 F:	include/linux/mfd/rohm-bd718x7.h
 F:	include/linux/mfd/rohm-bd957x.h
 F:	include/linux/mfd/rohm-bd96801.h
+F:	include/linux/mfd/rohm-bd96802.h
 F:	include/linux/mfd/rohm-generic.h
 F:	include/linux/mfd/rohm-shared.h
 
@@ -21329,7 +21719,7 @@ M:	Alex Gaynor <alex.gaynor@gmail.com>
 R:	Boqun Feng <boqun.feng@gmail.com>
 R:	Gary Guo <gary@garyguo.net>
 R:	Björn Roy Baron <bjorn3_gh@protonmail.com>
-R:	Benno Lossin <benno.lossin@proton.me>
+R:	Benno Lossin <lossin@kernel.org>
 R:	Andreas Hindborg <a.hindborg@kernel.org>
 R:	Alice Ryhl <aliceryhl@google.com>
 R:	Trevor Gross <tmgross@umich.edu>
@@ -21359,7 +21749,7 @@ F:	rust/kernel/alloc.rs
 F:	rust/kernel/alloc/
 
 RUST [PIN-INIT]
-M:	Benno Lossin <benno.lossin@proton.me>
+M:	Benno Lossin <lossin@kernel.org>
 L:	rust-for-linux@vger.kernel.org
 S:	Maintained
 W:	https://rust-for-linux.com/pin-init
@@ -21657,6 +22047,7 @@ F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Krzysztof Kozlowski <krzk@kernel.org>
+R:	André Draszik <andre.draszik@linaro.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -21667,7 +22058,7 @@ F:	Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
-F:	drivers/mfd/sec*.c
+F:	drivers/mfd/sec*.[ch]
 F:	drivers/regulator/s2m*.c
 F:	drivers/regulator/s5m*.c
 F:	drivers/rtc/rtc-s5m.c
@@ -21806,6 +22197,7 @@ F:	include/linux/preempt.h
 F:	include/linux/sched.h
 F:	include/linux/wait.h
 F:	include/uapi/linux/sched.h
+F:	kernel/fork.c
 F:	kernel/sched/
 
 SCHEDULER - SCHED_EXT
@@ -21813,7 +22205,7 @@ R:	Tejun Heo <tj@kernel.org>
 R:	David Vernet <void@manifault.com>
 R:	Andrea Righi <arighi@nvidia.com>
 R:	Changwoo Min <changwoo@igalia.com>
-L:	linux-kernel@vger.kernel.org
+L:	sched-ext@lists.linux.dev
 S:	Maintained
 W:	https://github.com/sched-ext/scx
 T:	git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext.git
@@ -21963,6 +22355,7 @@ F:	include/linux/seccomp.h
 F:	include/uapi/linux/seccomp.h
 F:	kernel/seccomp.c
 F:	tools/testing/selftests/kselftest_harness.h
+F:	tools/testing/selftests/kselftest_harness/
 F:	tools/testing/selftests/seccomp/*
 K:	\bsecure_computing
 K:	\bTIF_SECCOMP\b
@@ -22191,9 +22584,11 @@ S:	Maintained
 F:	drivers/misc/sgi-xp/
 
 SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
+M:	D. Wythe <alibuda@linux.alibaba.com>
+M:	Dust Li <dust.li@linux.alibaba.com>
+M:	Sidraya Jayagond <sidraya@linux.ibm.com>
 M:	Wenjia Zhang <wenjia@linux.ibm.com>
-M:	Jan Karcher <jaka@linux.ibm.com>
-R:	D. Wythe <alibuda@linux.alibaba.com>
+R:	Mahanta Jambigi <mjambigi@linux.ibm.com>
 R:	Tony Lu <tonylu@linux.alibaba.com>
 R:	Wen Gu <guwen@linux.alibaba.com>
 L:	linux-rdma@vger.kernel.org
@@ -22318,7 +22713,7 @@ M:	Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
 M:	Tobias Schaffner <tobias.schaffner@siemens.com>
 L:	linux-leds@vger.kernel.org
 S:	Maintained
-F:	drivers/leds/simple/
+F:	drivers/leds/simatic/
 
 SIEMENS IPC PLATFORM DRIVERS
 M:	Bao Cheng Su <baocheng.su@siemens.com>
@@ -22349,7 +22744,7 @@ K:	fu[57]40
 K:	[^@]sifive
 
 SILEAD TOUCHSCREEN DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -22382,7 +22777,7 @@ F:	Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
 F:	drivers/i3c/master/svc-i3c-master.c
 
 SIMPLEFB FB DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -22458,7 +22853,7 @@ F:	Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
 F:	drivers/nvmem/layouts/sl28vpd.c
 
 SLAB ALLOCATOR
-M:	Christoph Lameter <cl@linux.com>
+M:	Christoph Lameter <cl@gentwo.org>
 M:	David Rientjes <rientjes@google.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Vlastimil Babka <vbabka@suse.cz>
@@ -22511,7 +22906,7 @@ F:	Documentation/hwmon/emc2103.rst
 F:	drivers/hwmon/emc2103.c
 
 SMSC SCH5627 HARDWARE MONITOR DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-hwmon@vger.kernel.org
 S:	Supported
 F:	Documentation/hwmon/sch5627.rst
@@ -22701,7 +23096,7 @@ M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
-F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
 F:	drivers/media/i2c/imx219.c
 
 SONY IMX258 SENSOR DRIVER
@@ -22730,7 +23125,7 @@ F:	Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
 F:	drivers/media/i2c/imx283.c
 
 SONY IMX290 SENSOR DRIVER
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
@@ -22739,7 +23134,7 @@ F:	drivers/media/i2c/imx290.c
 
 SONY IMX296 SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
@@ -22761,8 +23156,9 @@ F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
 F:	drivers/media/i2c/imx334.c
 
 SONY IMX335 SENSOR DRIVER
+M:	Kieran Bingham <kieran.bingham@ideasonboard.com>
 L:	linux-media@vger.kernel.org
-S:	Orphan
+S:	Maintained
 T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
 F:	drivers/media/i2c/imx335.c
@@ -22782,7 +23178,7 @@ F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 F:	drivers/media/i2c/imx412.c
 
 SONY IMX415 SENSOR DRIVER
-M:	Michael Riesch <michael.riesch@wolfvision.net>
+M:	Michael Riesch <michael.riesch@collabora.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media.git
@@ -22807,7 +23203,6 @@ W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 F:	Documentation/admin-guide/laptops/sony-laptop.rst
 F:	drivers/char/sonypi.c
 F:	drivers/platform/x86/sony-laptop.c
-F:	include/linux/sony-laptop.h
 
 SOPHGO DEVICETREES and DRIVERS
 M:	Chen Wang <unicorn_wang@outlook.com>
@@ -22874,10 +23269,10 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
 F:	include/dt-bindings/sound/
-F:	include/sound/cs-amp-lib.h
-F:	include/sound/cs35l*
-F:	include/sound/cs4271.h
-F:	include/sound/cs42l*
+F:	include/sound/cs*
+X:	include/sound/cs4231-regs.h
+X:	include/sound/cs8403.h
+X:	include/sound/cs8427.h
 F:	include/sound/madera-pdata.h
 F:	include/sound/soc*
 F:	include/sound/sof.h
@@ -23106,6 +23501,12 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stm32*
 
+ST STM32 OCTO MEMORY MANAGER
+M:	Patrice Chotard <patrice.chotard@foss.st.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
+F:	drivers/memory/stm32_omm.c
+
 ST STM32 SPI DRIVER
 M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	linux-spi@vger.kernel.org
@@ -23119,6 +23520,22 @@ S:	Maintained
 F:	Documentation/hwmon/stpddc60.rst
 F:	drivers/hwmon/pmbus/stpddc60.c
 
+ST VD55G1 DRIVER
+M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
+F:	drivers/media/i2c/vd55g1.c
+
+ST VD56G3 IMAGE SENSOR DRIVER
+M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
+F:	drivers/media/i2c/vd56g3.c
+
 ST VGXY61 DRIVER
 M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
 M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
@@ -23144,7 +23561,7 @@ S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst
 
 STAGING - ATOMISP DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 R:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
@@ -23280,7 +23697,6 @@ F:	include/dt-bindings/clock/starfive?jh71*.h
 
 STARFIVE JH71X0 PINCTRL DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
-M:	Jianlong Huang <jianlong.huang@starfivetech.com>
 M:	Hal Feng <hal.feng@starfivetech.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
@@ -23441,7 +23857,7 @@ F:	arch/m68k/sun3*/
 F:	drivers/net/ethernet/i825xx/sun3*
 
 SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -23677,6 +24093,14 @@ L:	linux-i2c@vger.kernel.org
 S:	Supported
 F:	drivers/i2c/busses/i2c-designware-*
 
+SYNOPSYS DESIGNWARE I2C DRIVER - AMDISP
+M:	Nirujogi Pratap <pratap.nirujogi@amd.com>
+M:	Bin Du <bin.du@amd.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-designware-amdisp.c
+F:	include/linux/soc/amd/isp4_misc.h
+
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
 M:	Jaehoon Chung <jh80.chung@samsung.com>
 L:	linux-mmc@vger.kernel.org
@@ -23732,6 +24156,15 @@ F:	include/linux/sc[mp]i_protocol.h
 F:	include/trace/events/scmi.h
 F:	include/uapi/linux/virtio_scmi.h
 
+SYSTEM CONTROL MANAGEMENT INTERFACE (SCMI) i.MX Extension Message Protocol drivers
+M:	Peng Fan <peng.fan@nxp.com>
+L:	arm-scmi@vger.kernel.org
+L:	imx@lists.linux.dev
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/firmware/nxp,*scmi.yaml
+F:	drivers/firmware/arm_scmi/vendors/imx/
+
 SYSTEM RESET/SHUTDOWN DRIVERS
 M:	Sebastian Reichel <sre@kernel.org>
 L:	linux-pm@vger.kernel.org
@@ -23838,6 +24271,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
+F:	Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt
 F:	drivers/media/i2c/tda1997x.*
 
 TDA827x MEDIA DRIVER
@@ -24105,7 +24539,6 @@ F:	Documentation/devicetree/bindings/sound/ti,tlv320*.yaml
 F:	Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml
 F:	include/sound/tas2*.h
 F:	include/sound/tlv320*.h
-F:	include/sound/tpa6130a2-plat.h
 F:	sound/pci/hda/tas2781_hda_i2c.c
 F:	sound/soc/codecs/pcm1681.c
 F:	sound/soc/codecs/pcm1789*.*
@@ -24150,6 +24583,13 @@ F:	Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
 F:	Documentation/hwmon/tps23861.rst
 F:	drivers/hwmon/tps23861.c
 
+TEXAS INSTRUMENTS TPS6131X FLASH LED DRIVER
+M:	Matthias Fend <matthias.fend@emfend.at>
+L:	linux-leds@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/ti,tps6131x.yaml
+F:	drivers/leds/flash/leds-tps6131x.c
+
 TEXAS INSTRUMENTS' DAC7612 DAC DRIVER
 M:	Ricardo Ribalda <ribalda@kernel.org>
 L:	linux-iio@vger.kernel.org
@@ -24313,6 +24753,12 @@ M:	Robert Richter <rric@kernel.org>
 S:	Odd Fixes
 F:	drivers/gpio/gpio-thunderx.c
 
+TI ADC12xs and ROHM BD79104 ADC driver
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
+S:	Maintained
+F:	drivers/iio/adc/ti-adc128s052.c
+L:	linux-iio@vger.kernel.org
+
 TI ADS1119 ADC DRIVER
 M:	Francesco Dolcini <francesco@dolcini.it>
 M:	João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
@@ -24429,6 +24875,13 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
+TI FPC202 DUAL PORT CONTROLLER
+M:	Romain Gantois <romain.gantois@bootlin.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/ti,fpc202.yaml
+F:	drivers/misc/ti_fpc202.c
+
 TI FPD-LINK DRIVERS
 M:	Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -24611,16 +25064,17 @@ M:	Hugh Dickins <hughd@google.com>
 R:	Baolin Wang <baolin.wang@linux.alibaba.com>
 L:	linux-mm@kvack.org
 S:	Maintained
+F:	include/linux/memfd.h
 F:	include/linux/shmem_fs.h
+F:	mm/memfd.c
 F:	mm/shmem.c
+F:	mm/shmem_quota.c
 
 TOMOYO SECURITY MODULE
 M:	Kentaro Takeda <takedakn@nttdata.co.jp>
 M:	Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
-L:	tomoyo-dev-en@lists.osdn.me (subscribers-only, for developers in English)
-L:	tomoyo-users-en@lists.osdn.me (subscribers-only, for users in English)
-L:	tomoyo-dev@lists.osdn.me (subscribers-only, for developers in Japanese)
-L:	tomoyo-users@lists.osdn.me (subscribers-only, for users in Japanese)
+L:	tomoyo-users_en@lists.sourceforge.net (subscribers-only, English language)
+L:	tomoyo-users_ja@lists.sourceforge.net (subscribers-only, Japanese language)
 S:	Maintained
 W:	https://tomoyo.sourceforge.net/
 F:	security/tomoyo/
@@ -24631,6 +25085,13 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c
 
+TORADEX EMBEDDED CONTROLLER DRIVER
+M:	Emanuele Ghidoli <ghidoliemanuele@gmail.com>
+M:	Francesco Dolcini <francesco@dolcini.it>
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/toradex,smarc-ec.yaml
+F:	drivers/power/reset/tdx-ec-poweroff.c
+
 TORTURE-TEST MODULES
 M:	Davidlohr Bueso <dave@stgolabs.net>
 M:	"Paul E. McKenney" <paulmck@kernel.org>
@@ -24675,7 +25136,7 @@ TOSHIBA TC358743 DRIVER
 M:	Hans Verkuil <hverkuil-cisco@xs4all.nl>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/i2c/tc358743.txt
+F:	Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
 F:	drivers/media/i2c/tc358743*
 F:	include/media/i2c/tc358743.h
 
@@ -24717,6 +25178,7 @@ F:	arch/arm64/boot/dts/freescale/fsl-*tqml*.dts*
 F:	arch/arm64/boot/dts/freescale/imx*mba*.dts*
 F:	arch/arm64/boot/dts/freescale/imx*tqma*.dts*
 F:	arch/arm64/boot/dts/freescale/mba*.dtsi
+F:	arch/arm64/boot/dts/freescale/tqma8*.dtsi
 F:	arch/arm64/boot/dts/freescale/tqml*.dts*
 F:	drivers/gpio/gpio-tqmx86.c
 F:	drivers/mfd/tqmx86.c
@@ -24778,13 +25240,15 @@ M:	David Lechner <dlechner@baylibre.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/trigger-source/pwm-trigger.yaml
 
-TRUSTED SECURITY MODULE (TSM) ATTESTATION REPORTS
+TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-coco@lists.linux.dev
 S:	Maintained
-F:	Documentation/ABI/testing/configfs-tsm
-F:	drivers/virt/coco/tsm.c
-F:	include/linux/tsm.h
+F:	Documentation/ABI/testing/configfs-tsm-report
+F:	Documentation/driver-api/coco/
+F:	drivers/virt/coco/guest/
+F:	include/linux/tsm*.h
+F:	samples/tsm-mr/
 
 TRUSTED SERVICES TEE DRIVER
 M:	Balint Dobszay <balint.dobszay@arm.com>
@@ -24829,13 +25293,12 @@ L:	linux-parisc@vger.kernel.org
 S:	Orphan
 F:	drivers/net/ethernet/dec/tulip/
 
-TUN/TAP driver
+TUN/TAP DRIVER
 M:	Willem de Bruijn <willemdebruijn.kernel@gmail.com>
 M:	Jason Wang <jasowang@redhat.com>
 S:	Maintained
 W:	http://vtun.sourceforge.net/tun
 F:	Documentation/networking/tuntap.rst
-F:	arch/um/os-Linux/drivers/
 F:	drivers/net/tap.c
 F:	drivers/net/tun*
 
@@ -24857,6 +25320,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat
 F:	tools/power/x86/turbostat/
 F:	tools/testing/selftests/turbostat/
 
+TUXEDO DRIVERS
+M:	Werner Sembach <wse@tuxedocomputers.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Supported
+F:	drivers/platform/x86/tuxedo/
+
 TW5864 VIDEO4LINUX DRIVER
 M:	Bluecherry Maintainers <maintainers@bluecherrydvr.com>
 M:	Andrey Utkin <andrey.utkin@corp.bluecherry.net>
@@ -24977,6 +25446,12 @@ S:	Maintained
 F:	drivers/usb/common/ulpi.c
 F:	include/linux/ulpi/
 
+ULTRATRONIK BOARD SUPPORT
+M:	Goran Rađenović <goran.radni@gmail.com>
+M:	Börge Strümpfel <boerge.struempfel@gmail.com>
+S:	Maintained
+F:	arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
+
 UNICODE SUBSYSTEM
 M:	Gabriel Krisman Bertazi <krisman@kernel.org>
 L:	linux-fsdevel@vger.kernel.org
@@ -25040,7 +25515,7 @@ S:	Maintained
 F:	drivers/ufs/host/ufs-mediatek*
 
 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER QUALCOMM HOOKS
-M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <mani@kernel.org>
 L:	linux-arm-msm@vger.kernel.org
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
@@ -25154,7 +25629,7 @@ F:	Documentation/hid/hiddev.rst
 F:	drivers/hid/usbhid/
 
 USB INTEL XHCI ROLE MUX DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/roles/intel-xhci-usb-role-switch.c
@@ -25345,7 +25820,7 @@ F:	Documentation/firmware-guide/acpi/intel-pmc-mux.rst
 F:	drivers/usb/typec/mux/intel_pmc_mux.c
 
 USB TYPEC PI3USB30532 MUX DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/typec/mux/pi3usb30532.c
@@ -25374,7 +25849,7 @@ F:	drivers/usb/host/uhci*
 
 USB VIDEO CLASS
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 W:	http://www.ideasonboard.org/uvc/
@@ -25428,6 +25903,8 @@ F:	fs/hostfs/
 
 USERSPACE COPYIN/COPYOUT (UIOVEC)
 M:	Alexander Viro <viro@zeniv.linux.org.uk>
+L:	linux-block@vger.kernel.org
+L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/uio.h
 F:	lib/iov_iter.c
@@ -25517,6 +25994,8 @@ F:	drivers/media/i2c/mt*
 F:	drivers/media/i2c/og*
 F:	drivers/media/i2c/ov*
 F:	drivers/media/i2c/s5*
+F:	drivers/media/i2c/vd55g1.c
+F:	drivers/media/i2c/vd56g3.c
 F:	drivers/media/i2c/vgxy61.c
 
 VF610 NAND DRIVER
@@ -25813,6 +26292,7 @@ F:	include/uapi/linux/virtio_gpio.h
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@redhat.com>
 M:	Gerd Hoffmann <kraxel@redhat.com>
+M:	Dmitry Osipenko <dmitry.osipenko@collabora.com>
 R:	Gurchetan Singh <gurchetansingh@chromium.org>
 R:	Chia-I Wu <olvaffe@gmail.com>
 L:	dri-devel@lists.freedesktop.org
@@ -25885,6 +26365,13 @@ S:	Maintained
 F:	drivers/nvdimm/nd_virtio.c
 F:	drivers/nvdimm/virtio_pmem.c
 
+VIRTIO RTC DRIVER
+M:	Peter Hilber <quic_philber@quicinc.com>
+L:	virtualization@lists.linux.dev
+S:	Maintained
+F:	drivers/virtio/virtio_rtc_*
+F:	include/uapi/linux/virtio_rtc.h
+
 VIRTIO SOUND DRIVER
 M:	Anton Yakovlev <anton.yakovlev@opensynergy.com>
 M:	"Michael S. Tsirkin" <mst@redhat.com>
@@ -25895,7 +26382,7 @@ F:	include/uapi/linux/virtio_snd.h
 F:	sound/virtio/*
 
 VIRTUAL BOX GUEST DEVICE DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Arnd Bergmann <arnd@arndb.de>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
@@ -25904,7 +26391,7 @@ F:	include/linux/vbox_utils.h
 F:	include/uapi/linux/vbox*.h
 
 VIRTUAL BOX SHARED FOLDER VFS DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/vboxsf/*
@@ -25977,6 +26464,7 @@ W:	http://www.linux-mm.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
 F:	include/linux/vmalloc.h
 F:	mm/vmalloc.c
+F:	lib/test_vmalloc.c
 
 VME SUBSYSTEM
 L:	linux-kernel@vger.kernel.org
@@ -26157,7 +26645,7 @@ F:	drivers/mmc/host/wbsd.*
 
 WACOM PROTOCOL 4 SERIAL TABLETS
 M:	Julian Squires <julian@cipht.net>
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/tablet/wacom_serial4.c
@@ -26223,6 +26711,12 @@ M:	David Härdeman <david@hardeman.nu>
 S:	Maintained
 F:	drivers/media/rc/winbond-cir.c
 
+WINSEN MHZ19B
+M:	Gyeyoung Baek <gye976@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml
+F:	drivers/iio/chemical/mhz19b.c
+
 WINSYSTEMS EBC-C384 WATCHDOG DRIVER
 L:	linux-watchdog@vger.kernel.org
 S:	Orphan
@@ -26318,7 +26812,7 @@ F:	include/linux/wwan.h
 F:	include/uapi/linux/wwan.h
 
 X-POWERS AXP288 PMIC DRIVERS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 S:	Maintained
 F:	drivers/acpi/pmic/intel_pmic_xpower.c
 N:	axp288
@@ -26366,7 +26860,7 @@ R:	Ahmed S. Darwish <darwi@linutronix.de>
 L:	x86-cpuid@lists.linux.dev
 S:	Maintained
 W:	https://x86-cpuid.org
-F:	tools/arch/x86/kcpuid/cpuid.csv
+F:	tools/arch/x86/kcpuid/
 
 X86 ENTRY CODE
 M:	Andy Lutomirski <luto@kernel.org>
@@ -26410,14 +26904,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
 F:	arch/x86/mm/
 
 X86 PLATFORM ANDROID TABLETS DSDT FIXUP DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git
 F:	drivers/platform/x86/x86-android-tablets/
 
 X86 PLATFORM DRIVERS
-M:	Hans de Goede <hdegoede@redhat.com>
+M:	Hans de Goede <hansg@kernel.org>
 M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -26448,12 +26942,13 @@ F:	arch/x86/kernel/stacktrace.c
 F:	arch/x86/kernel/unwind_*.c
 
 X86 TRUST DOMAIN EXTENSIONS (TDX)
-M:	Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
+M:	Kirill A. Shutemov <kas@kernel.org>
 R:	Dave Hansen <dave.hansen@linux.intel.com>
 L:	x86@kernel.org
 L:	linux-coco@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/tdx
+F:	Documentation/ABI/testing/sysfs-devices-virtual-misc-tdx_guest
 F:	arch/x86/boot/compressed/tdx*
 F:	arch/x86/coco/tdx/
 F:	arch/x86/include/asm/shared/tdx.h
@@ -26481,6 +26976,17 @@ F:	lib/test_xarray.c
 F:	lib/xarray.c
 F:	tools/testing/radix-tree
 
+XARRAY API [RUST]
+M:	Tamir Duberstein <tamird@gmail.com>
+M:	Andreas Hindborg <a.hindborg@kernel.org>
+L:	rust-for-linux@vger.kernel.org
+S:	Supported
+W:	https://rust-for-linux.com
+B:	https://github.com/Rust-for-Linux/linux/issues
+C:	https://rust-for-linux.zulipchat.com
+T:	git https://github.com/Rust-for-Linux/linux.git xarray-next
+F:	rust/kernel/xarray.rs
+
 XBOX DVD IR REMOTE
 M:	Benjamin Valentin <benpicco@googlemail.com>
 S:	Maintained
@@ -26502,6 +27008,7 @@ M:	David S. Miller <davem@davemloft.net>
 M:	Jakub Kicinski <kuba@kernel.org>
 M:	Jesper Dangaard Brouer <hawk@kernel.org>
 M:	John Fastabend <john.fastabend@gmail.com>
+R:	Stanislav Fomichev <sdf@fomichev.me>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Supported
@@ -26523,6 +27030,7 @@ M:	Björn Töpel <bjorn@kernel.org>
 M:	Magnus Karlsson <magnus.karlsson@intel.com>
 M:	Maciej Fijalkowski <maciej.fijalkowski@intel.com>
 R:	Jonathan Lemon <jonathan.lemon@gmail.com>
+R:	Stanislav Fomichev <sdf@fomichev.me>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Maintained
@@ -26708,8 +27216,6 @@ M:	Dragan Cvetic <dragan.cvetic@amd.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
 F:	Documentation/misc-devices/xilinx_sdfec.rst
-F:	drivers/misc/Kconfig
-F:	drivers/misc/Makefile
 F:	drivers/misc/xilinx_sdfec.c
 F:	include/uapi/misc/xilinx_sdfec.h
 
@@ -26805,13 +27311,6 @@ S:	Supported
 W:	http://www.marvell.com
 F:	drivers/i2c/busses/i2c-xlp9xx.c
 
-XRA1403 GPIO EXPANDER
-M:	Nandor Han <nandor.han@ge.com>
-L:	linux-gpio@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
-F:	drivers/gpio/gpio-xra1403.c
-
 XTENSA XTFPGA PLATFORM SUPPORT
 M:	Max Filippov <jcmvbkbc@gmail.com>
 S:	Maintained
@@ -26894,6 +27393,14 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/zhaoxin.c
 
+ZONED LOOP DEVICE
+M:	Damien Le Moal <dlemoal@kernel.org>
+R:	Christoph Hellwig <hch@lst.de>
+L:	linux-block@vger.kernel.org
+S:	Maintained
+F:	Documentation/admin-guide/blockdev/zoned_loop.rst
+F:	drivers/block/zloop.c
+
 ZONEFS FILESYSTEM
 M:	Damien Le Moal <dlemoal@kernel.org>
 M:	Naohiro Aota <naohiro.aota@wdc.com>
diff --git linux-libre-6.15-gnu/Makefile linux-libre-6.16-gnu/Makefile
index e9f8e55427ec..4c8520573739 100644
--- linux-libre-6.15-gnu/Makefile
+++ linux-libre-6.16-gnu/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
-PATCHLEVEL = 15
+PATCHLEVEL = 16
 SUBLEVEL = 0
 EXTRAVERSION = -gnu
 NAME = Baby Opossum Posse
@@ -458,6 +458,11 @@ endif
 HOSTRUSTC = rustc
 HOSTPKG_CONFIG	= pkg-config
 
+# the KERNELDOC macro needs to be exported, as scripts/Makefile.build
+# has a logic to call it
+KERNELDOC       = $(srctree)/scripts/kernel-doc.py
+export KERNELDOC
+
 KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
 			 -O2 -fomit-frame-pointer -std=gnu11
 KBUILD_USERCFLAGS  := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS)
@@ -749,7 +754,7 @@ targets :=
 # Normally, just do built-in.
 
 KBUILD_MODULES :=
-KBUILD_BUILTIN := 1
+KBUILD_BUILTIN := y
 
 # If we have only "make modules", don't compile built-in objects.
 ifeq ($(MAKECMDGOALS),modules)
@@ -761,11 +766,11 @@ endif
 # Just "make" or "make all" shall build modules as well
 
 ifneq ($(filter all modules nsdeps compile_commands.json clang-%,$(MAKECMDGOALS)),)
-  KBUILD_MODULES := 1
+  KBUILD_MODULES := y
 endif
 
 ifeq ($(MAKECMDGOALS),)
-  KBUILD_MODULES := 1
+  KBUILD_MODULES := y
 endif
 
 export KBUILD_MODULES KBUILD_BUILTIN
@@ -1184,13 +1189,8 @@ export ARCH_LIB		:= $(filter %/, $(libs-y))
 export ARCH_DRIVERS	:= $(drivers-y) $(drivers-m)
 # Externally visible symbols (used by link-vmlinux.sh)
 
-KBUILD_VMLINUX_OBJS := ./built-in.a
-ifdef CONFIG_MODULES
-KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
+KBUILD_VMLINUX_OBJS := built-in.a $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
 KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
-else
-KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y))
-endif
 
 export KBUILD_VMLINUX_LIBS
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
@@ -1198,7 +1198,7 @@ export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 # For the kernel to actually contain only the needed exported symbols,
 # we have to build modules as well to determine what those symbols are.
-KBUILD_MODULES := 1
+KBUILD_MODULES := y
 endif
 
 # '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
@@ -1365,7 +1365,7 @@ PHONY += archheaders archscripts
 hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
 
 PHONY += headers
-headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
+headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders
 ifdef HEADER_ARCH
 	$(Q)$(MAKE) -f $(srctree)/Makefile HEADER_ARCH= SRCARCH=$(HEADER_ARCH) headers
 else
@@ -1538,7 +1538,7 @@ all: modules
 # the built-in objects during the descend as well, in order to
 # make sure the checksums are up to date before we record them.
 ifdef CONFIG_MODVERSIONS
-  KBUILD_BUILTIN := 1
+  KBUILD_BUILTIN := y
 endif
 
 # Build modules
@@ -1547,7 +1547,7 @@ endif
 # *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES
 # is an exception.
 ifdef CONFIG_DEBUG_INFO_BTF_MODULES
-KBUILD_BUILTIN := 1
+KBUILD_BUILTIN := y
 modules: vmlinux
 endif
 
@@ -1860,7 +1860,7 @@ filechk_kernel.release = echo $(KERNELRELEASE)
 
 # We are always building only modules.
 KBUILD_BUILTIN :=
-KBUILD_MODULES := 1
+KBUILD_MODULES := y
 
 build-dir := .
 
@@ -1988,7 +1988,7 @@ endif
 
 single-goals := $(addprefix $(build-dir)/, $(single-no-ko))
 
-KBUILD_MODULES := 1
+KBUILD_MODULES := y
 
 endif
 
diff --git linux-libre-6.15-gnu/arch/Kconfig linux-libre-6.16-gnu/arch/Kconfig
index b0adb665041f..a3308a220f86 100644
--- linux-libre-6.15-gnu/arch/Kconfig
+++ linux-libre-6.16-gnu/arch/Kconfig
@@ -1518,6 +1518,14 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
+config ARCH_HAS_CPU_RESCTRL
+	bool
+	help
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
+
 config HAVE_ARCH_COMPILER_H
 	bool
 	help
diff --git linux-libre-6.15-gnu/arch/alpha/include/asm/pgtable.h linux-libre-6.16-gnu/arch/alpha/include/asm/pgtable.h
index 02e8817a8921..44e7aedac6e8 100644
--- linux-libre-6.15-gnu/arch/alpha/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/alpha/include/asm/pgtable.h
@@ -192,13 +192,6 @@ extern unsigned long __zero_page(void);
 #define pte_pfn(pte)		(pte_val(pte) >> PFN_PTE_SHIFT)
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -334,7 +327,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/alpha/include/uapi/asm/socket.h linux-libre-6.16-gnu/arch/alpha/include/uapi/asm/socket.h
index 3df5f2dd4c0f..8f1f18adcdb5 100644
--- linux-libre-6.15-gnu/arch/alpha/include/uapi/asm/socket.h
+++ linux-libre-6.16-gnu/arch/alpha/include/uapi/asm/socket.h
@@ -150,6 +150,8 @@
 
 #define SO_RCVPRIORITY		82
 
+#define SO_PASSRIGHTS		83
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git linux-libre-6.15-gnu/arch/alpha/kernel/Makefile linux-libre-6.16-gnu/arch/alpha/kernel/Makefile
index b6c862dff1f6..187cd8df2faf 100644
--- linux-libre-6.15-gnu/arch/alpha/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/alpha/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
diff --git linux-libre-6.15-gnu/arch/alpha/kernel/perf_event.c linux-libre-6.16-gnu/arch/alpha/kernel/perf_event.c
index 1f0eb4f25c0f..a3eaab094ece 100644
--- linux-libre-6.15-gnu/arch/alpha/kernel/perf_event.c
+++ linux-libre-6.16-gnu/arch/alpha/kernel/perf_event.c
@@ -852,14 +852,9 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
 	perf_sample_data_init(&data, 0, hwc->last_period);
 
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
+	if (alpha_perf_event_set_period(event, hwc, idx))
+		perf_event_overflow(event, &data, regs);
+
 	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 
 	return;
diff --git linux-libre-6.15-gnu/arch/alpha/kernel/srmcons.c linux-libre-6.16-gnu/arch/alpha/kernel/srmcons.c
index a89ce84371f9..d19e51ec711d 100644
--- linux-libre-6.15-gnu/arch/alpha/kernel/srmcons.c
+++ linux-libre-6.16-gnu/arch/alpha/kernel/srmcons.c
@@ -69,7 +69,8 @@ srmcons_do_receive_chars(struct tty_port *port)
 static void
 srmcons_receive_chars(struct timer_list *t)
 {
-	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct srmcons_private *srmconsp = timer_container_of(srmconsp, t,
+							      timer);
 	struct tty_port *port = &srmconsp->port;
 	unsigned long flags;
 	int incr = 10;
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/arcregs.h linux-libre-6.16-gnu/arch/arc/include/asm/arcregs.h
index 005d9e4d187a..a31bbf5c8bbc 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/arcregs.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/arcregs.h
@@ -144,7 +144,7 @@
 #define ARC_AUX_AGU_MOD2	0x5E2
 #define ARC_AUX_AGU_MOD3	0x5E3
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <soc/arc/arc_aux.h>
 
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/atomic.h linux-libre-6.16-gnu/arch/arc/include/asm/atomic.h
index 592d7fffc223..e615c42b93ba 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/atomic.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/atomic.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -31,6 +31,6 @@
 #include <asm/atomic64-arcv2.h>
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/atomic64-arcv2.h linux-libre-6.16-gnu/arch/arc/include/asm/atomic64-arcv2.h
index 9b5791b85471..73080a664369 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/atomic64-arcv2.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/atomic64-arcv2.h
@@ -137,12 +137,9 @@ ATOMIC64_OPS(xor, xor, xor)
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline s64
-arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+static inline u64 __arch_cmpxchg64_relaxed(volatile void *ptr, u64 old, u64 new)
 {
-	s64 prev;
-
-	smp_mb();
+	u64 prev;
 
 	__asm__ __volatile__(
 	"1:	llockd  %0, [%1]	\n"
@@ -152,14 +149,12 @@ arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
 	"	bnz     1b		\n"
 	"2:				\n"
 	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
+	: "r"(ptr), "ir"(old), "r"(new)
+	: "memory", "cc");
 
 	return prev;
 }
-#define arch_atomic64_cmpxchg arch_atomic64_cmpxchg
+#define arch_cmpxchg64_relaxed __arch_cmpxchg64_relaxed
 
 static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 {
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/bitops.h linux-libre-6.16-gnu/arch/arc/include/asm/bitops.h
index f5a936496f06..5340c2871392 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/bitops.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/bitops.h
@@ -10,7 +10,7 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -192,6 +192,6 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/bug.h linux-libre-6.16-gnu/arch/arc/include/asm/bug.h
index 4c453ba96c51..171c16021f70 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/bug.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/bug.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_BUG_H
 #define _ASM_ARC_BUG_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 
@@ -29,6 +29,6 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #include <asm-generic/bug.h>
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/cache.h linux-libre-6.16-gnu/arch/arc/include/asm/cache.h
index f0f1fc5d62b6..040a97f4dd82 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/cache.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/cache.h
@@ -23,7 +23,7 @@
  */
 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/build_bug.h>
 
@@ -65,7 +65,7 @@
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* Instruction cache related Auxiliary registers */
 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/current.h linux-libre-6.16-gnu/arch/arc/include/asm/current.h
index 06be89f6f2f0..03ffd005f3fa 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/current.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/current.h
@@ -9,7 +9,7 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 
@@ -20,6 +20,6 @@ register struct task_struct *curr_arc asm("gp");
 #include <asm-generic/current.h>
 #endif /* ! CONFIG_ARC_CURR_IN_REG */
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #endif /* _ASM_ARC_CURRENT_H */
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/dsp-impl.h linux-libre-6.16-gnu/arch/arc/include/asm/dsp-impl.h
index cd5636dfeb6f..fd5fdaad90c1 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/dsp-impl.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/dsp-impl.h
@@ -11,7 +11,7 @@
 
 #define DSP_CTRL_DISABLED_ALL		0
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* clobbers r5 register */
 .macro DSP_EARLY_INIT
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/dsp.h linux-libre-6.16-gnu/arch/arc/include/asm/dsp.h
index f496dbc4640b..eeaaf4e4eabd 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/dsp.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/dsp.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARC_DSP_H
 #define __ASM_ARC_DSP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * DSP-related saved registers - need to be saved only when you are
@@ -24,6 +24,6 @@ struct dsp_callee_regs {
 #endif
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_ARC_DSP_H */
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/dwarf.h linux-libre-6.16-gnu/arch/arc/include/asm/dwarf.h
index a0d5ebe1bc3f..1524c5cf8b59 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/dwarf.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/dwarf.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_DWARF_H
 #define _ASM_ARC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef ARC_DW2_UNWIND_AS_CFI
 
@@ -38,6 +38,6 @@
 
 #endif	/* !ARC_DW2_UNWIND_AS_CFI */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_ARC_DWARF_H */
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/entry.h linux-libre-6.16-gnu/arch/arc/include/asm/entry.h
index 38c35722cebf..f453af251a1a 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/entry.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/entry.h
@@ -13,7 +13,7 @@
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/mmu.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_ISA_ARCOMPACT
 #include <asm/entry-compact.h>	/* ISA specific bits */
@@ -146,7 +146,7 @@
 
 #endif	/* CONFIG_ARC_CURR_IN_REG */
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 extern void do_signal(struct pt_regs *);
 extern void do_notify_resume(struct pt_regs *);
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/hugepage.h linux-libre-6.16-gnu/arch/arc/include/asm/hugepage.h
index 8a2441670a8f..7765dc105d54 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/hugepage.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/hugepage.h
@@ -40,8 +40,6 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
-#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
-
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/irqflags-arcv2.h linux-libre-6.16-gnu/arch/arc/include/asm/irqflags-arcv2.h
index fb3c21f1a238..30aea562f8aa 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/irqflags-arcv2.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/irqflags-arcv2.h
@@ -50,7 +50,7 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Save IRQ state and disable IRQs
@@ -170,6 +170,6 @@ static inline void arc_softirq_clear(int irq)
 	seti
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/irqflags-compact.h linux-libre-6.16-gnu/arch/arc/include/asm/irqflags-compact.h
index 936a2f21f315..85c2f6bcde0c 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/irqflags-compact.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/irqflags-compact.h
@@ -40,7 +40,7 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /******************************************************************
  * IRQ Control Macros
@@ -196,6 +196,6 @@ static inline int arch_irqs_disabled(void)
 	flag	\scratch
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/jump_label.h linux-libre-6.16-gnu/arch/arc/include/asm/jump_label.h
index a339223d9e05..66ead75784d9 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/jump_label.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ARC_JUMP_LABEL_H
 #define _ASM_ARC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/stringify.h>
 #include <linux/types.h>
@@ -68,5 +68,5 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/linkage.h linux-libre-6.16-gnu/arch/arc/include/asm/linkage.h
index 8a3fb71e9cfa..ba3cb65b5eaa 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/linkage.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/linkage.h
@@ -12,7 +12,7 @@
 #define __ALIGN		.align 4
 #define __ALIGN_STR	__stringify(__ALIGN)
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro ST2 e, o, off
 #ifdef CONFIG_ARC_HAS_LL64
@@ -61,7 +61,7 @@
 	CFI_ENDPROC ASM_NL	\
 	.size name, .-name
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
 #define __arcfp_code __section(".text.arcfp")
@@ -75,6 +75,6 @@
 #define __arcfp_data __section(".data")
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/mmu-arcv2.h linux-libre-6.16-gnu/arch/arc/include/asm/mmu-arcv2.h
index 41412642f279..5e5482026ac9 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/mmu-arcv2.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/mmu-arcv2.h
@@ -69,7 +69,7 @@
 
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mm_struct;
 extern int pae40_exist_but_not_enab(void);
@@ -100,6 +100,6 @@ static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
 	sr \reg, [ARC_REG_PID]
 .endm
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/mmu.h linux-libre-6.16-gnu/arch/arc/include/asm/mmu.h
index 4ae2db59d494..e3b35ceab582 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/mmu.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/mmu.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_MMU_H
 #define _ASM_ARC_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/threads.h>	/* NR_CPUS */
 
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/page.h linux-libre-6.16-gnu/arch/arc/include/asm/page.h
index def0dfb95b43..9720fe6b2c24 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/page.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/page.h
@@ -19,7 +19,7 @@
 
 #endif /* CONFIG_ARC_HAS_PAE40 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -136,6 +136,6 @@ static inline unsigned long virt_to_pfn(const void *kaddr)
 #include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/pgtable-bits-arcv2.h linux-libre-6.16-gnu/arch/arc/include/asm/pgtable-bits-arcv2.h
index 8ebec1b21d24..4630c5acca05 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/pgtable-bits-arcv2.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -75,7 +75,7 @@
  *     This is to enable COW mechanism
  */
 	/* xwr */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
@@ -130,7 +130,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -142,6 +142,6 @@ PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
 #include <asm/hugepage.h>
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/pgtable-levels.h linux-libre-6.16-gnu/arch/arc/include/asm/pgtable-levels.h
index 86e148226463..c8f9273372c0 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/pgtable-levels.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/pgtable-levels.h
@@ -85,7 +85,7 @@
 
 #define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if CONFIG_PGTABLE_LEVELS > 3
 #include <asm-generic/pgtable-nop4d.h>
@@ -142,7 +142,6 @@
 
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #endif
 
@@ -177,12 +176,11 @@
 #define set_pte(ptep, pte)	((*(ptep)) = (pte))
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
 #define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 
 #ifdef CONFIG_ISA_ARCV2
 #define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/pgtable.h linux-libre-6.16-gnu/arch/arc/include/asm/pgtable.h
index 4cf45a99fd79..bd580e2b62d7 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/pgtable.h
@@ -19,7 +19,7 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
@@ -29,6 +29,6 @@ extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/processor.h linux-libre-6.16-gnu/arch/arc/include/asm/processor.h
index d606658e2fe7..7f7901ac6643 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/processor.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/processor.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 #include <asm/dsp.h>
@@ -66,7 +66,7 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc,
 
 extern unsigned int __get_wchan(struct task_struct *p);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Default System Memory Map on ARC
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/ptrace.h linux-libre-6.16-gnu/arch/arc/include/asm/ptrace.h
index cf79df0b2570..f6c052af8f4d 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/ptrace.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/ptrace.h
@@ -10,7 +10,7 @@
 #include <uapi/asm/ptrace.h>
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union {
 	struct {
@@ -172,6 +172,6 @@ static inline unsigned long regs_get_register(struct pt_regs *regs,
 extern int syscall_trace_enter(struct pt_regs *);
 extern void syscall_trace_exit(struct pt_regs *);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/switch_to.h linux-libre-6.16-gnu/arch/arc/include/asm/switch_to.h
index 1f85de8288b1..5806106a65f9 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/switch_to.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/switch_to.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_SWITCH_TO_H
 #define _ASM_ARC_SWITCH_TO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <asm/dsp-impl.h>
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/syscall.h linux-libre-6.16-gnu/arch/arc/include/asm/syscall.h
index 9709256e31c8..728d625a10f1 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/syscall.h
@@ -23,6 +23,17 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 		return -1;
 }
 
+static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->r8 = nr;
+}
+
 static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
@@ -67,6 +78,20 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &regs->r0;
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		*inside_ptregs = args[i++];
+		inside_ptregs--;
+	}
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git linux-libre-6.15-gnu/arch/arc/include/asm/thread_info.h linux-libre-6.16-gnu/arch/arc/include/asm/thread_info.h
index 12daaf3a61ea..255d2c774219 100644
--- linux-libre-6.15-gnu/arch/arc/include/asm/thread_info.h
+++ linux-libre-6.16-gnu/arch/arc/include/asm/thread_info.h
@@ -24,7 +24,7 @@
 #define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/thread_info.h>
 
@@ -62,7 +62,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git linux-libre-6.15-gnu/arch/arc/include/uapi/asm/ptrace.h linux-libre-6.16-gnu/arch/arc/include/uapi/asm/ptrace.h
index 2a6eff57f6dd..3ae832db278c 100644
--- linux-libre-6.15-gnu/arch/arc/include/uapi/asm/ptrace.h
+++ linux-libre-6.16-gnu/arch/arc/include/uapi/asm/ptrace.h
@@ -14,7 +14,7 @@
 
 #define PTRACE_GET_THREAD_AREA	25
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Userspace ABI: Register state needed by
  *  -ptrace (gdbserver)
@@ -53,6 +53,6 @@ struct user_regs_arcv2 {
 	unsigned long r30, r58, r59;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git linux-libre-6.15-gnu/arch/arc/kernel/Makefile linux-libre-6.16-gnu/arch/arc/kernel/Makefile
index 95fbf9364c67..fa94fff02419 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/arc/kernel/Makefile
@@ -26,4 +26,4 @@ ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
 endif
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git linux-libre-6.15-gnu/arch/arc/kernel/intc-arcv2.c linux-libre-6.16-gnu/arch/arc/kernel/intc-arcv2.c
index fea29d9d18d6..809edc59af25 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/intc-arcv2.c
+++ linux-libre-6.16-gnu/arch/arc/kernel/intc-arcv2.c
@@ -170,7 +170,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
diff --git linux-libre-6.15-gnu/arch/arc/kernel/intc-compact.c linux-libre-6.16-gnu/arch/arc/kernel/intc-compact.c
index 1d2ff1c6a61b..1b159e9e0234 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/intc-compact.c
+++ linux-libre-6.16-gnu/arch/arc/kernel/intc-compact.c
@@ -112,8 +112,9 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
-					    &arc_intc_domain_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc),
+					       NR_CPU_IRQS,
+					       &arc_intc_domain_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
diff --git linux-libre-6.15-gnu/arch/arc/kernel/mcip.c linux-libre-6.16-gnu/arch/arc/kernel/mcip.c
index cdd370ec9280..02b28a9324f4 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/mcip.c
+++ linux-libre-6.16-gnu/arch/arc/kernel/mcip.c
@@ -391,7 +391,8 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 
 	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
-	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_irqs,
+					  &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
diff --git linux-libre-6.15-gnu/arch/arc/kernel/perf_event.c linux-libre-6.16-gnu/arch/arc/kernel/perf_event.c
index 6e5a651cd75c..ed6d4f0cd621 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/perf_event.c
+++ linux-libre-6.16-gnu/arch/arc/kernel/perf_event.c
@@ -599,10 +599,8 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 		arc_perf_event_update(event, &event->hw, event->hw.idx);
 		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (arc_pmu_event_set_period(event)) {
-			if (perf_event_overflow(event, &data, regs))
-				arc_pmu_stop(event, 0);
-		}
+		if (arc_pmu_event_set_period(event))
+			perf_event_overflow(event, &data, regs);
 
 		active_ints &= ~BIT(idx);
 	} while (active_ints);
diff --git linux-libre-6.15-gnu/arch/arc/kernel/unwind.c linux-libre-6.16-gnu/arch/arc/kernel/unwind.c
index d8969dab12d4..789cfb9ea14e 100644
--- linux-libre-6.15-gnu/arch/arc/kernel/unwind.c
+++ linux-libre-6.16-gnu/arch/arc/kernel/unwind.c
@@ -241,15 +241,6 @@ static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
 	return (e1->start > e2->start) - (e1->start < e2->start);
 }
 
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
-	struct eh_frame_hdr_table_entry *e1 = p1;
-	struct eh_frame_hdr_table_entry *e2 = p2;
-
-	swap(e1->start, e2->start);
-	swap(e1->fde, e2->fde);
-}
-
 static void init_unwind_hdr(struct unwind_table *table,
 			    void *(*alloc) (unsigned long))
 {
@@ -345,7 +336,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	sort(header->table,
 	     n,
 	     sizeof(*header->table),
-	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+	     cmp_eh_frame_hdr_table_entries, NULL);
 
 	table->hdrsz = hdrSize;
 	smp_wmb();
diff --git linux-libre-6.15-gnu/arch/arm/Kconfig linux-libre-6.16-gnu/arch/arm/Kconfig
index 25ed6f1a7c7a..962451e54fdd 100644
--- linux-libre-6.15-gnu/arch/arm/Kconfig
+++ linux-libre-6.16-gnu/arch/arm/Kconfig
@@ -121,7 +121,7 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
-	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_CAN_USE_KEEP_IN_OVERLAY)
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
@@ -1380,8 +1380,7 @@ config CC_HAVE_STACKPROTECTOR_TLS
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
 	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
-	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
-	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
+	depends on CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
diff --git linux-libre-6.15-gnu/arch/arm/Makefile linux-libre-6.16-gnu/arch/arm/Makefile
index 4808d3ed98e4..e31e95ffd33f 100644
--- linux-libre-6.15-gnu/arch/arm/Makefile
+++ linux-libre-6.16-gnu/arch/arm/Makefile
@@ -149,7 +149,7 @@ endif
 # Need -Uarm for gcc < 3.x
 KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
 KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
diff --git linux-libre-6.15-gnu/arch/arm/boot/compressed/Makefile linux-libre-6.16-gnu/arch/arm/boot/compressed/Makefile
index 945b5975fce2..d61369b1eabe 100644
--- linux-libre-6.15-gnu/arch/arm/boot/compressed/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/compressed/Makefile
@@ -96,7 +96,7 @@ KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
 	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
-	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
+	     -I$(obj)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/compressed/efi-header.S linux-libre-6.16-gnu/arch/arm/boot/compressed/efi-header.S
index 230030c13085..65a3025c0e13 100644
--- linux-libre-6.15-gnu/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-6.16-gnu/arch/arm/boot/compressed/efi-header.S
@@ -20,7 +20,7 @@
 		@ is accepted as an EFI binary. Booting via the UEFI stub
 		@ will not execute those instructions, but the ARM/Linux
 		@ boot protocol does, so we need some NOPs here.
-		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
 		eor	r5, r5, 0x4d000			@ undo previous insn
 #else
 		__nop
@@ -43,7 +43,7 @@
 		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.long	PE_MAGIC
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
 		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
@@ -60,7 +60,7 @@ coff_header:
 #define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
 		.byte	0x02				@ MajorLinkerVersion
 		.byte	0x14				@ MinorLinkerVersion
 		.long	__pecoff_code_size		@ SizeOfCode
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 46ecf9db2324..d8b362c9661a 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -169,6 +170,32 @@
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
index addf0cb0f465..6f88d8764e6a 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -1225,7 +1225,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu0_hot>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1255,7 +1255,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu1_hot>;
 					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
index 6d85370e04f1..9a2742363cd0 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
index eac2349a2380..cfd039840b43 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -262,7 +262,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index a5b1f1e3900d..fa162f7fa9f0 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -146,7 +146,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index f909b1d4dbca..e82cf312da25 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -652,7 +652,7 @@
 			reg = <0x01cb4000 0x3000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CSI>,
-				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_CSI_SCLK>,
 				 <&ccu CLK_DRAM_CSI>;
 			clock-names = "bus", "mod", "ram";
 			resets = <&ccu RST_BUS_CSI>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/Makefile
index 504c533b1173..3c8a1e88b386 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_MACH_MESON8) += \
 	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
 	meson8b-ec100.dtb \
 	meson8b-mxq.dtb \
 	meson8b-odroidc1.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/meson8.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8.dtsi
index f785e0de0847..a609b5a0fda4 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/meson8.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -398,7 +398,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -481,6 +481,14 @@
 			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
 		sd_a_pins: sd-a {
 			mux {
 				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
@@ -526,6 +534,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		spdif_out_pins: spdif-out {
 			mux {
 				groups = "spdif_out";
@@ -567,7 +585,7 @@
 				groups = "uart_tx_a1",
 				       "uart_rx_a1";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/meson8b.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8b.dtsi
index fdb0abe23a0c..2d77b9876bf4 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/amlogic/meson8b.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -368,7 +368,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -521,7 +521,7 @@
 				groups = "uart_tx_b0",
 				       "uart_rx_b0";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/Makefile
index d23cf466127b..71062ff9adbe 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/Makefile
@@ -7,6 +7,7 @@ DTC_FLAGS_bcm2835-rpi-b-plus := -@
 DTC_FLAGS_bcm2835-rpi-a-plus := -@
 DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
 DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
 DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
 DTC_FLAGS_bcm2837-rpi-3-b := -@
 DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
@@ -25,6 +26,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2835-rpi-cm1-io1.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
 	bcm2837-rpi-3-a-plus.dtb \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
index 87180b7fd695..f535212cb52f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -46,6 +46,11 @@
 			interrupt-controller;
 		};
 
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
 		timer@1006000 {
 			compatible = "brcm,kona-timer";
 			reg = <0x01006000 0x1c>;
@@ -332,3 +337,5 @@
 		};
 	};
 };
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm28155-ap.dts linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
index 2f3634545e64..cefaa9a3c45c 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -37,7 +37,39 @@
 	status = "okay";
 
 	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
 	};
 };
 
@@ -74,39 +106,3 @@
 &usbphy {
 	status = "okay";
 };
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm59056.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/broadcom/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378..000000000000
--- linux-libre-6.15-gnu/arch/arm/boot/dts/broadcom/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/intel/socfpga/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/intel/socfpga/Makefile
index c467828aeb4b..7f69a0355ea5 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/intel/socfpga/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de10nano.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_cyclone5_sodia.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts linux-libre-6.16-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
new file mode 100644
index 000000000000..ec25106caacf
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+/dts-v1/;
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		/* 1 GiB */
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	soc {
+		fpga: bus@ff200000 {
+			compatible = "simple-bus";
+			reg = <0xff200000 0x00200000>;
+			ranges = <0x00000000 0xff200000 0x00200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Here the devices will appear if an FPGA image is
+			 * loaded. Their description is expected to be added
+			 * using a device tree overlay that matches the image.
+			 */
+		};
+	};
+};
+
+&gmac1 {
+	/* Uses a KSZ9031RNX phy */
+	phy-mode = "rgmii-id";
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	rxdv-skew-ps = <420>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+	};
+};
+
+&mmc0 {
+	/* micro SD card socket J11 */
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Accessible via USB (FT232R) on Mini-USB plug J4
+	 * RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49
+	 * TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50
+	 * no handshaking lines
+	 */
+	clock-frequency = <100000000>;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-db.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
index 6fe2e31534af..8bacaeb4f4bd 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -39,7 +39,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-dir665.dts linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 2f6793f794cd..36394d1ab3e2 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -129,7 +129,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index e3b41784c876..051579fc36b8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -63,7 +63,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood.dtsi
index 815ef7719d13..8a1338e672b3 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/kirkwood.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -263,7 +263,7 @@
 			status = "okay";
 		};
 
-		usb0: ehci@50000 {
+		usb0: usb@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/orion5x.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/orion5x.dtsi
index 2d41f5c166ee..939259c57e05 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/marvell/orion5x.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -146,7 +146,7 @@
 				status = "okay";
 			};
 
-			ehci0: ehci@50000 {
+			ehci0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
@@ -218,7 +218,7 @@
 				status = "okay";
 			};
 
-			ehci1: ehci@a0000 {
+			ehci1: usb@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/mediatek/mt2701-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/mediatek/mt2701-evb.dts
index 4c76366aa938..e97dc37f716c 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/mediatek/mt2701-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -50,6 +50,7 @@
 
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	backlight_lcd: backlight_lcd {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index 30fdc4f55a3b..53a657cf4efb 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -30,6 +30,15 @@
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 };
 
 &dma0 {
@@ -60,6 +69,26 @@
 	status = "okay";
 };
 
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c10 {
 	dmas = <0>, <0>;
 	i2c-analog-filter;
@@ -99,6 +128,149 @@
 			label = "VDDCPU";
 		};
 	};
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcpu: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom0: eeprom@51 {
+		compatible = "microchip,24aa025e48";
+		reg = <0x51>;
+		size = <256>;
+		pagesize = <16>;
+		vcc-supply = <&vdd_3v3>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom0_eui48: eui48@fa {
+				reg = <0xfa 0x6>;
+			};
+		};
+	};
 };
 
 &main_xtal {
@@ -106,6 +278,39 @@
 };
 
 &pioa {
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
 	pinctrl_i2c10_default: i2c10-default{
 		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
 			 <PIN_PB20__FLEXCOM10_IO0>;
@@ -141,6 +346,10 @@
 	};
 };
 
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
 &sdmmc1 {
 	bus-width = <4>;
 	pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
index 2dec2218f32c..eb5f27ce1942 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -369,6 +369,38 @@
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
+		label = "at91-qspi";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "qspi1: at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "qspi1: u-boot";
+				reg = <0x40000 0x100000>;
+			};
+
+			bootloaderenv@140000 {
+				label = "qspi1: u-boot env";
+				reg = <0x140000 0x40000>;
+			};
+
+			dtb@180000 {
+				label = "qspi1: device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "qspi1: kernel";
+				reg = <0x200000 0x600000>;
+			};
+		};
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index 471ea25296aa..93c5268a0845 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -152,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/sama7d65.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/sama7d65.dtsi
index b6710ccd4c36..d08d773b1cc5 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -47,12 +47,37 @@
 		};
 	};
 
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x20000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		securam: sram@e0000800 {
+			compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000800 0x4000>;
+			ranges = <0 0xe0000800 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-memory-wc;
+		};
+
+		secumod: security-module@e0004000 {
+			compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		sfrbu: sfr@e0008000 {
 			compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
 			reg = <0xe0008000 0x20>;
@@ -107,6 +132,13 @@
 			status = "disabled";
 		};
 
+		rtt: rtc@e001d300 {
+			compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d300 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
 		clk32k: clock-controller@e001d500 {
 			compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
 			reg = <0xe001d500 0x4>;
@@ -114,6 +146,11 @@
 			#clock-cells = <1>;
 		};
 
+		gpbr: syscon@e001d700 {
+			compatible = "microchip,sama7d65-gpbr", "syscon";
+			reg = <0xe001d700 0x48>;
+		};
+
 		rtc: rtc@e001d800 {
 			compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc";
 			reg = <0xe001d800 0x30>;
@@ -169,6 +206,38 @@
 			status = "disabled";
 		};
 
+		gmac0: ethernet@e1618000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe1618000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e161c000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe161c000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
 		pit64b0: timer@e1800000 {
 			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
 			reg = <0xe1800000 0x100>;
@@ -185,6 +254,199 @@
 			clock-names = "pclk", "gclk";
 		};
 
+		flx0: flexcom@e1820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1820000 0x200>;
+			ranges = <0x0 0xe1820000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e1824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			ranges = <0x0 0xe1824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			spi1: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@e1828000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1828000 0x200>;
+			ranges = <0x0 0xe1828000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e182c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe182c000 0x200>;
+			ranges = <0x0 0xe182c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			ranges = <0x0 0xe2018000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@e201c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe201c000 0x200>;
+			ranges = <0x0 0xe201c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
 		flx6: flexcom@e2020000 {
 			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2020000 0x200>;
@@ -206,6 +468,80 @@
 			};
 		};
 
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			ranges = <0x0 0xe2024000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@e281c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e2820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
 		flx10: flexcom@e2824000 {
 			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
@@ -227,6 +563,16 @@
 			};
 		};
 
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			reg = <0xe8c11000 0x1000>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
index 3dd48b3e06da..fd8244b56e05 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9260.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9260.dts
index e7f7b259ccf3..3b61e7145060 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9260.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -12,14 +12,6 @@
 	model = "Calao USB A9260";
 	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
 
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
 	ahb {
 		apb {
 			shdwc: poweroff@fffffd10 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 8c3530638c6d..da32c5fdcc47 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -6,6 +6,11 @@
  */
 
 / {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -16,6 +21,10 @@
 		};
 	};
 
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
index 60d7936dc562..8e1a3fb61087 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -58,7 +58,7 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
 				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9g20.dts
index a2f748141d4b..555291cd30b3 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -5,9 +5,24 @@
  *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 /dts-v1/;
-#include "usb_a9g20_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
 	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
 };
+
+&spi0 {
+	cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	/* TODO: Some revisions might have a dataflash here instead of an EEPROM */
+	eeprom@0 {
+		compatible = "st,m95640", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		size = <8192>;
+		pagesize = <32>;
+		address-width = <16>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
deleted file mode 100644
index f1946e0996b7..000000000000
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board
- *
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9g20.dtsi"
-#include "usb_a9260_common.dtsi"
-
-/ {
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	i2c-gpio-0 {
-		rtc@56 {
-			compatible = "microcrystal,rv3029";
-			reg = <0x56>;
-		};
-	};
-};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
index 4d104797176c..2eda00477bc5 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -5,7 +5,8 @@
  *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 /dts-v1/;
-#include "usb_a9g20_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20 Low Power";
@@ -27,4 +28,11 @@
 			};
 		};
 	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 868454ae6bde..791090f54d8b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@
 		};
 	};
 
+	udc0_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -122,6 +127,13 @@
 			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
 		};
 
+		mc: memory-controller@f0824000 {
+			compatible = "nuvoton,npcm750-memory-controller";
+			reg = <0xf0824000 0x1000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		gmac0: eth@f0802000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
@@ -137,6 +149,29 @@
 			status = "disabled";
 		};
 
+		sdmmc: mmc@f0842000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0842000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_mmc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc8_pins
+					&mmc_pins>;
+		};
+
+		sdhci: mmc@f0840000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0840000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_sdhc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_pins>;
+		};
+
 		ehci1: usb@f0806000 {
 			compatible = "nuvoton,npcm750-ehci";
 			reg = <0xf0806000 0x1000>;
@@ -144,6 +179,13 @@
 			status = "disabled";
 		};
 
+		ohci1: usb@f0807000 {
+			compatible = "generic-ohci";
+			reg = <0xf0807000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		fiu0: spi@fb000000 {
 			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
@@ -179,6 +221,72 @@
 			status = "disabled";
 		};
 
+		udc5: usb@f0835000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0835000 0x1000
+			       0xfffd2800 0x800>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc6: usb@f0836000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0836000 0x1000
+			       0xfffd3000 0x800>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc7: usb@f0837000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0837000 0x1000
+			       0xfffd3800 0x800>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc8: usb@f0838000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0838000 0x1000
+			       0xfffd4000 0x800>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc9: usb@f0839000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0839000 0x1000
+			       0xfffd4800 0x800>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			nuvoton,sysgcr = <&gcr>;
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
index c3501786d600..231228842e63 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
@@ -1050,19 +1050,19 @@
 		"","","","SIO_POWER_GOOD","","","","";
 	};
 	gpio2: gpio@f0012000 {
-		bmc_usb_mux_oe_n {
+		bmc-usb-mux-oe-n-hog {
 			gpio-hog;
 			gpios = <25 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-oe-n";
 		};
-		bmc_usb_mux_sel {
+		bmc-usb-mux-sel-hog {
 			gpio-hog;
 			gpios = <26 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-sel";
 		};
-		bmc_usb2517_reset_n {
+		bmc-usb2517-reset-n-hog {
 			gpio-hog;
 			gpios = <27 GPIO_ACTIVE_LOW>;
 			output-low;
@@ -1070,19 +1070,19 @@
 		};
 	};
 	gpio3: gpio@f0013000 {
-		assert_cpu0_reset {
+		assert-cpu0-reset-hog {
 			gpio-hog;
 			gpios = <14 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-cpu0-reset";
 		};
-		assert_pwrok_cpu0_n {
+		assert-pwrok-cpu0-n-hog {
 			gpio-hog;
 			gpios = <15 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-pwrok-cpu0-n";
 		};
-		assert_cpu0_prochot {
+		assert-cpu0-prochot-hog {
 			gpio-hog;
 			gpios = <16 GPIO_ACTIVE_HIGH>;
 			output-low;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index f67ede148209..0c94e14d40e8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -427,91 +427,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-		G1A_P0_0 {
+		g1a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "TPM_BMC_ALERT_N";
 		};
-		G1A_P0_1 {
+		g1a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_TOP_SWAP";
 		};
-		G1A_P0_2 {
+		g1a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_BIOS_PREFRB2_GOOD";
 		};
-		G1A_P0_3 {
+		g1a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_0TO3_SEL";
 		};
-		G1A_P0_4 {
+		g1a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_4TO7_SEL";
 		};
-		G1A_P0_5 {
+		g1a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-low;
 			line-name = "FM_UV_ADR_TRIGGER_EN_N";
 		};
-		G1A_P0_6 {
+		g1a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "RM_THROTTLE_EN_N";
 		};
-		G1A_P1_0 {
+		g1a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_BMC_TPM_PRES_N";
 		};
-		G1A_P1_1 {
+		g1a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_CPU0_SKTOCC_LVT3_N";
 		};
-		G1A_P1_2 {
+		g1a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_CPU1_SKTOCC_LVT3_N";
 		};
-		G1A_P1_3 {
+		g1a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_ALERT_N";
 		};
-		G1A_P1_4 {
+		g1a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "PSU2_ALERT_N";
 		};
-		G1A_P1_5 {
+		g1a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
 		};
-		G1A_P1_6 {
+		g1a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "I2C_MUX1_RESET_N";
 		};
-		G1A_P1_7 {
+		g1a-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			input;
@@ -524,91 +524,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G1B_P0_0 {
+		g1b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "PVDDQ_ABC_PINALERT_N";
 		};
-		G1B_P0_1 {
+		g1b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "PVDDQ_DEF_PINALERT_N";
 		};
-		G1B_P0_2 {
+		g1b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "PVDDQ_GHJ_PINALERT_N";
 		};
-		G1B_P0_3 {
+		g1b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "PVDDQ_KLM_PINALERT_N";
 		};
-		G1B_P0_5 {
+		g1b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID0";
 		};
-		G1B_P0_6 {
+		g1b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID1";
 		};
-		G1B_P0_7 {
+		g1b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID2";
 		};
-		G1B_P1_0 {
+		g1b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_OC_DETECT_EN_N";
 		};
-		G1B_P1_1 {
+		g1b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_FLASH_DESC_OVERRIDE";
 		};
-		G1B_P1_2 {
+		g1b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "FP_PWR_ID_LED_N";
 		};
-		G1B_P1_3 {
+		g1b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_GRN";
 		};
-		G1B_P1_4 {
+		g1b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_AMBER";
 		};
-		G1B_P1_5 {
+		g1b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
 			line-name = "FM_BMC_FAULT_LED_N";
 		};
-		G1B_P1_6 {
+		g1b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "FM_CPLD_BMC_PWRDN_N";
 		};
-		G1B_P1_7 {
+		g1b-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			output-high;
@@ -626,91 +626,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-		G2A_P0_0 {
+		g2a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "BMC_PON_RST_REQ_N";
 		};
-		G2A_P0_1 {
+		g2a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			output-high;
 			line-name = "BMC_RST_IND_REQ_N";
 		};
-		G2A_P0_2 {
+		g2a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "RST_BMC_RTCRST";
 		};
-		G2A_P0_3 {
+		g2a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-high;
 			line-name = "FM_BMC_PWRBTN_OUT_N";
 		};
-		G2A_P0_4 {
+		g2a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
 		};
-		G2A_P0_5 {
+		g2a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "FM_BATTERY_SENSE_EN_N";
 		};
-		G2A_P0_6 {
+		g2a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-high;
 			line-name = "FM_BMC_READY_N";
 		};
-		G2A_P0_7 {
+		g2a-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 		};
-		G2A_P1_0 {
+		g2a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_SLOT4_CFG0";
 		};
-		G2A_P1_1 {
+		g2a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_SLOT4_CFG1";
 		};
-		G2A_P1_2 {
+		g2a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_NVDIMM_EVENT_N";
 		};
-		G2A_P1_3 {
+		g2a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_BLADE_EN_N";
 		};
-		G2A_P1_4 {
+		g2a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "BMC_PCH_FNM";
 		};
-		G2A_P1_5 {
+		g2a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "FM_SOL_UART_CH_SEL";
 		};
-		G2A_P1_6 {
+		g2a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			input;
@@ -723,91 +723,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G2B_P0_0 {
+		g2b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "FM_CPU_MSMI_LVT3_N";
 		};
-		G2B_P0_1 {
+		g2b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
 		};
-		G2B_P0_2 {
+		g2b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_CPU1_DISABLE_BMC_N";
 		};
-		G2B_P0_3 {
+		g2b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-low;
 			line-name = "BMC_JTAG_SELECT";
 		};
-		G2B_P0_4 {
+		g2b-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "PECI_MUX_SELECT";
 		};
-		G2B_P0_5 {
+		g2b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "I2C_MUX2_RESET_N";
 		};
-		G2B_P0_6 {
+		g2b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BMC_CPLD_PSU2_ON";
 		};
-		G2B_P0_7 {
+		g2b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			output-high;
 			line-name = "PSU2_ALERT_EN_N";
 		};
-		G2B_P1_0 {
+		g2b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			output-high;
 			line-name = "FM_CPU_BMC_INIT";
 		};
-		G2B_P1_1 {
+		g2b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			output-high;
 			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
 		};
-		G2B_P1_2 {
+		g2b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "PMB_ALERT_EN_N";
 		};
-		G2B_P1_3 {
+		g2b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-high;
 			line-name = "FM_FAST_PROCHOT_EN_N";
 		};
-		G2B_P1_4 {
+		g2b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-high;
 			line-name = "BMC_NVDIMM_PRSNT_N";
 		};
-		G2B_P1_5 {
+		g2b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-low;
 			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
 		};
-		G2B_P1_6 {
+		g2b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index 30eed40b89b5..f42ad259636c 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -58,5 +58,70 @@
 					&rg2mdio_pins>;
 			status = "disabled";
 		};
+
+		udc0: usb@f0830000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0830000 0x1000
+			       0xfffd0000 0x800>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc1: usb@f0831000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0831000 0x1000
+			       0xfffd0800 0x800>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc2: usb@f0832000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0832000 0x1000
+			       0xfffd1000 0x800>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc3: usb@f0833000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0833000 0x1000
+			       0xfffd1800 0x800>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc4: usb@f0834000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0834000 0x1000
+			       0xfffd2000 0x800>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/Makefile
index 96972559253c..ff2c5bfd8efa 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/Makefile
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-tf201.dtb \
 	tegra30-asus-tf300t.dtb \
 	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf300tl.dtb \
 	tegra30-asus-tf700t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
index 0f3debeb294b..1aa7265554d9 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
@@ -84,11 +84,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
index d13b8d25ca6a..23158bb82173 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
@@ -85,11 +85,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra20.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra20.dtsi
index 8da75ccc4402..882adb7f2f26 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra20.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -284,7 +284,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
index fc284155cd76..ccb9f29c5de3 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
@@ -91,11 +91,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
index 9d08e2b094b4..bc353324df43 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
@@ -92,11 +92,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
new file mode 100644
index 000000000000..2ef9d8737901
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad LTE TF300TL";
+	compatible = "asus,tf300tl", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tl-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0",  "1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2940000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2260000>;
+		energy-full-design-microwatt-hours = <16000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tl",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TL RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30.dtsi
index f866fa7b55a5..2a4d93db8134 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nvidia/tegra30.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -431,7 +431,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 10aa7fa08fb6..6a9b430c1d11 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -611,7 +611,7 @@
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx31-lite.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@
 &weim {
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x0 0x200000>;
 		bank-width = <2>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx31.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx31.dtsi
index be5dab0150dd..9320c6eff3d5 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx31.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -218,7 +218,7 @@
 			};
 
 			iim: efuse@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx31-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
 				clocks = <&clks 25>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx35.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 69fd7540542f..e6d751fed55d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -363,7 +363,7 @@
 			reg = <0x80000000 0x40000000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
index dc72a2d14960..1980f751f161 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
@@ -165,7 +165,7 @@
 	mma7455l@1d {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
+		compatible = "fsl,mma7455";
 		reg = <0x1d>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx51.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index d80f2670b5af..84d3a01c4f24 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx51.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -476,7 +476,7 @@
 			};
 
 			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx51-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -595,7 +595,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@83fdb000 {
+			nfc: nand-controller@83fdb000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-nand";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx53.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx53.dtsi
index 3b75285d1546..3f5c947059d9 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx53.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -668,7 +668,7 @@
 			};
 
 			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx53-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -775,7 +775,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@63fdb000 {
+			nfc: nand-controller@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
index e1077e2da5f4..1f2200f50059 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -36,15 +36,6 @@
 	status = "okay";
 };
 
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	/* PCIe Switch */
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-};
-
 &pcie {
 	vpcie-supply = <&reg_pcie_switch>;
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index f08b37010291..bba82126aaaa 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -279,7 +279,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index a381cb224c1e..2587d17c5918 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -854,7 +854,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
index fbe260c9872e..cad985e341a1 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
@@ -384,7 +384,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
index eec526a96311..ff9d50942884 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
@@ -374,7 +374,7 @@
 	cap-power-off-card;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 0484e349e064..d961c61a93af 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -48,7 +48,7 @@
 
 		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
+			opp-microvolt = <1000000 950000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xd>, <0x7>;
 			opp-suspend;
@@ -56,7 +56,7 @@
 
 		opp-996000000 {
 			opp-hz = /bits/ 64 <996000000>;
-			opp-microvolt = <1100000>;
+			opp-microvolt = <1100000 1045000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			opp-suspend;
@@ -64,7 +64,7 @@
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1225000>;
+			opp-microvolt = <1225000 1200000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0x8>, <0x3>;
 			opp-suspend;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 279e10e07372..63f548be5cc9 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -73,7 +73,6 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
 			operating-points-v2 = <&cpu0_opp_table>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 974410918f35..41f41a786f9d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -94,7 +94,7 @@
 			/*
 			 * Enable either ohci or usbd (gadget)!
 			 */
-			ohci: ohci@0 {
+			ohci: usb@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/Makefile
index 14759331dba2..53240b04c968 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/Makefile
@@ -6,3 +6,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtbo
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 000000000000..e713a2ecbfc2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+};
+
+&sii9022a_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..e9708f3c6740
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lvds_encoder {
+	status = "okay";
+};
+
+&lvds_encoder_in {
+	remote-endpoint = <&dcu_out>;
+};
+
+&lvds_encoder_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&panel_in {
+	remote-endpoint = <&lvds_encoder_out>;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
new file mode 100644
index 000000000000..146d45601f69
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
new file mode 100644
index 000000000000..db66831f31af
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
index 34636fcdfd6a..5606585dd560 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
@@ -147,6 +147,7 @@
 	display: panel {
 		backlight = <&backlight_dcu>;
 		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3p3v>;
 		status = "disabled";
 
 		port {
@@ -156,7 +157,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "ls1021a-mbls1021a-tlv320aic32";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
index 1b13851ad997..271001eb5ad7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
@@ -72,6 +72,7 @@
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
+		vcc-supply = <&reg_3p3v_som>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index cb661bf2d157..613f13b6c8a8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -93,9 +93,9 @@
 						MX23_PAD_LCD_HSYNC__GPIO_1_24
 						MX23_PAD_PWM3__GPIO_1_29
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
index 0b088c8ab6b6..fad08f6c008f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -83,9 +83,9 @@
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				key_pins_a: keys@0 {
@@ -94,9 +94,9 @@
 						MX23_PAD_ROTARYA__GPIO_2_7
 						MX23_PAD_ROTARYB__GPIO_2_8
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 		};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
index 2c52e67e5c14..a6903ef2b093 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
@@ -299,7 +299,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	wlan@1 {
+	wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
index d004b1cbb4ae..f170df37b3f8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
@@ -102,9 +102,9 @@
 			0x31c3 /*
 			MX28_PAD_PWM3__GPIO_3_28 */
 		>;
-		fsl,drive-strength = <0>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <0>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/Makefile
index f06c6d425e91..0c1d116f6e84 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-ifc6410.dtb \
 	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
 	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8064-lg-nexus4-mako.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
index 5dbca83f2230..e6392f7d14c7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -31,6 +31,15 @@
 			vsp-supply = <&reg_lcd_pos>;
 			vsn-supply = <&reg_lcd_neg>;
 			vddio-supply = <&vddio_disp_vreg>;
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MMSS_MISC_AHB_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
 		};
 	};
 
@@ -53,9 +62,12 @@
 		};
 	};
 
+	/* TI TPS22902 */
 	vddio_disp_vreg: regulator-vddio-disp {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_disp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pm8226_l8>;
 		startup-delay-us = <300>;
@@ -97,6 +109,7 @@
 };
 
 &blsp1_i2c2 {
+	clock-frequency = <100000>;
 	status = "okay";
 
 	magnetometer@c {
@@ -126,6 +139,7 @@
 };
 
 &blsp1_i2c3 {
+	clock-frequency = <400000>;
 	status = "okay";
 
 	regulator@3e {
@@ -136,8 +150,8 @@
 
 		reg_lcd_pos: outp {
 			regulator-name = "outp";
-			regulator-min-microvolt = <4000000>;
-			regulator-max-microvolt = <6000000>;
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
 			regulator-active-discharge = <1>;
 			regulator-boot-on;
 			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -145,8 +159,8 @@
 
 		reg_lcd_neg: outn {
 			regulator-name = "outn";
-			regulator-min-microvolt = <4000000>;
-			regulator-max-microvolt = <6000000>;
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
 			regulator-active-discharge = <1>;
 			regulator-boot-on;
 			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/msm8926.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/msm8926.dtsi
new file mode 100644
index 000000000000..629654c525b4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/msm8926.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca@lucaweiss.eu>
+ */
+
+#include "qcom-msm8226.dtsi"
+
+&modem {
+	compatible = "qcom,msm8926-mss-pil";
+	/delete-property/ qcom,ext-bhs-reg;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index da3be658e822..4546fa8beba4 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
index 7d519156d91d..a8543ca7b556 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -12,6 +12,8 @@
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b3ff8010b149..717bfd74edb7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -138,7 +138,6 @@
 
 &hdmi {
 	core-vdda-supply = <&pm8921_hdmi_switch>;
-	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
new file mode 100644
index 000000000000..c187c6875bc6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "LG Nexus 4 (mako)";
+	compatible = "lg,nexus4-mako", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		serial2 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <900000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000{
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+
+	status = "okay";
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+
+	status = "okay";
+};
+
+&gsbi4_serial {
+	status = "okay";
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 1, KEY_VOLUMEUP)
+	>;
+
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		pm8921_l1: l1 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_3p3 */
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3500000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_1p8 */
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* msm_sdcc.1-sdc_vdd */
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* earjack_debug */
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_vci */
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddpa */
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_avdd */
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* touch_vdd */
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* slimport_dvdd */
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		/* touch_io */
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * mipi_dsi.1-dsi_vddio
+		 * pil_qdsp6v4.1-pll_vdd
+		 * pil_qdsp6v4.2-pll_vdd
+		 * msm_ehci_host.0-HSUSB_1p8
+		 * msm_ehci_host.1-HSUSB_1p8
+		 */
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l26: l26 {
+			regulator-min-microvolt = <375000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l27: l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8921_l28: l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddio */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vdddig */
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_iovcc */
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		/*
+		 * pil_riva-pll_vdd
+		 * lvds.0-lvds_vdda
+		 * mipi_dsi.1-dsi1_vddio
+		 * hdmi_msm.0-hdmi_vdda
+		 */
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* msm otg HSUSB_VDDCX */
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt	= <1800000>;
+			regulator-max-microvolt	= <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		/*
+		 * supply vdd_l26, vdd_l27, vdd_l28
+		 */
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s8: s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 5f1a6b4b7644..17e506ca2438 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -213,12 +213,6 @@
 		};
 	};
 
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
@@ -284,6 +278,40 @@
 		};
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+
+		clocks = <&rpmcc RPM_QDSS_CLK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				replicator_in: endpoint {
+					remote-endpoint = <&funnel_out>;
+				};
+			};
+		};
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out0: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out1: endpoint {
+					remote-endpoint = <&tpiu_in>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -305,9 +333,10 @@
 			pinctrl-0 = <&ps_hold_default_state>;
 		};
 
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
+		sfpb_mutex: hwmutex@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -326,6 +355,8 @@
 				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
@@ -405,8 +436,8 @@
 			};
 		};
 
-		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible = "syscon";
+		sps_sic_non_secure: interrupt-controller@12100000 {
+			compatible = "qcom,apq8064-sps-sic", "syscon";
 			reg = <0x12100000 0x10000>;
 		};
 
@@ -737,7 +768,8 @@
 				 <&dsi0_phy 0>,
 				 <&dsi1_phy 1>,
 				 <&dsi1_phy 0>,
-				 <&hdmi_phy>;
+				 <&hdmi_phy>,
+				 <&mdp>;
 			clock-names = "pxo",
 				      "pll3",
 				      "pll8_vote",
@@ -745,7 +777,8 @@
 				      "dsi1pllbyte",
 				      "dsi2pll",
 				      "dsi2pllbyte",
-				      "hdmipll";
+				      "hdmipll",
+				      "lvdspll";
 		};
 
 		l2cc: clock-controller@2011000 {
@@ -1089,7 +1122,7 @@
 		};
 
 		mmss_sfpb: syscon@5700000 {
-			compatible = "syscon";
+			compatible = "qcom,apq8064-mmss-sfpb", "syscon";
 			reg = <0x5700000 0x70>;
 		};
 
@@ -1404,13 +1437,19 @@
 				 <&mmcc MDP_AXI_CLK>,
 				 <&mmcc MDP_LUT_CLK>,
 				 <&mmcc HDMI_TV_CLK>,
-				 <&mmcc MDP_TV_CLK>;
+				 <&mmcc MDP_TV_CLK>,
+				 <&mmcc LVDS_CLK>,
+				 <&rpmcc RPM_PXO_CLK>;
 			clock-names = "core_clk",
 				      "iface_clk",
 				      "bus_clk",
 				      "lut_clk",
 				      "hdmi_clk",
-				      "tv_clk";
+				      "tv_clk",
+				      "lcdc_clk",
+				      "pxo";
+
+			#clock-cells = <0>;
 
 			iommus = <&mdp_port0 0
 				  &mdp_port0 2
@@ -1532,39 +1571,6 @@
 			};
 		};
 
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
 		funnel@1a04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x1a04000 0x1000>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 85d13ba363f7..24d7e32e5d11 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -149,7 +149,7 @@
 };
 
 &pm8941_gpios {
-        msm_keys_default: pm8941-gpio-keys-state {
+	msm_keys_default: pm8941-gpio-keys-state {
 		pins = "gpio5", "gpio23";
 		function = "normal";
 		input-enable;
@@ -157,7 +157,7 @@
 		bias-pull-up;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 		power-source = <PM8941_GPIO_S3>; /* 1.8V */
-        };
+	};
 };
 
 &pm8941_lpg {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index a6d4390efa7c..be76bc39ac27 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -251,7 +251,7 @@
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
 	nvmem-cells = <&precal_art_5000>;
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+	qcom,calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
 &usb3_hs_phy {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
index 6640ea7b6acb..15baaf0d1529 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -179,13 +179,13 @@
 &wifi0 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &wifi1 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &usb3_ss_phy {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
index cc88cf5f0d9b..5a95a2d03c42 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -43,7 +43,7 @@
 				       "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68", "gpio69";
 				function = "qpic";
-                        };
+			};
 		};
 
 		serial@78af000 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 06b20c196faf..f77542fb3d4f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -53,7 +53,6 @@
 			reg = <0x0>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -67,7 +66,6 @@
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -81,7 +79,6 @@
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -95,7 +92,6 @@
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -126,7 +122,7 @@
 		opp-716000000 {
 			opp-hz = /bits/ 64 <716000000>;
 			clock-latency-ns = <256000>;
- 		};
+		};
 	};
 
 	memory {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
index ca76bf8af75e..d4a32af0ef8f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -8,7 +8,11 @@
  * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
  */
 
-#include "qcom-msm8226.dtsi"
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
 #include "pm8226.dtsi"
 #include <dt-bindings/input/input.h>
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
index 2c664b5934ec..f448c9088416 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 / {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
index 731c5c375678..94bf3b1ad1bd 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 / {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
index a28a83cb5340..d8cdb75dfbb8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has no magnetometer */
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
index a15a44fc0181..f1544a7e8369 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -3,11 +3,17 @@
  * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
  */
 
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
 #include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
@@ -145,12 +151,12 @@
 			no-map;
 		};
 
-		mpss@8400000 {
+		mpss_region: mpss@8400000 {
 			reg = <0x08400000 0x1f00000>;
 			no-map;
 		};
 
-		mba@a300000 {
+		mba_region: mba@a300000 {
 			reg = <0x0a300000 0x100000>;
 			no-map;
 		};
@@ -223,6 +229,13 @@
 	status = "okay";
 };
 
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 64c8ac94f352..51a7a3fb36d8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -213,6 +214,18 @@
 			no-map;
 		};
 
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
 		adsp_region: adsp@dc00000 {
 			reg = <0x0dc00000 0x1900000>;
 			no-map;
@@ -253,6 +266,65 @@
 		};
 	};
 
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -845,12 +917,96 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		modem: remoteproc@fc880000 {
+			compatible = "qcom,msm8226-mss-pil";
+			reg = <0xfc880000 0x4040>,
+			      <0xfc820000 0x10000>;
+			reg-names = "qdsp6",
+				    "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,ext-bhs-reg = <&tcsr_regs_1 0x194>;
+			qcom,halt-regs = <&tcsr_regs_1 0x180 0x200 0x280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			memory-region = <&mba_region>, <&mpss_region>;
+
+			status = "disabled";
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
 		tcsr_mutex: hwlock@fd484000 {
 			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
 			reg = <0xfd484000 0x1000>;
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs_1: syscon@fd485000 {
+			compatible = "qcom,tcsr-msm8226", "syscon";
+			reg = <0xfd485000 0x1000>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,msm8226-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -983,8 +1139,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -1060,8 +1216,8 @@
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
index 66e242cb414c..350ecd1a04a7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -5,10 +5,12 @@
 
 /dts-v1/;
 
-#include "qcom-msm8226.dtsi"
+#include "msm8926.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
@@ -193,6 +195,16 @@
 	/* TPS61310 Flash/Torch @ 33 */
 };
 
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+	mss-supply = <&pm8226_s5>;
+
+	firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &pm8226_vib {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
index 9b48661d69c5..eea4fd8cd972 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has touchscreen on i2c3 instead */
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
index 55077a5f2e34..f23bbb94cc5e 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has touchscreen on i2c1 instead */
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
index 376a33125941..db3273c755c2 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -2,7 +2,7 @@
 
 /dts-v1/;
 
-#include "qcom-msm8226.dtsi"
+#include "msm8926.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &smem_region;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
index d0e1bc39f8ef..73e19176eb97 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 	};
 };
 
+&modem {
+	mss-supply = <&pm8226_s5>;
+};
+
 &tlmm {
 	tsp_en1_default_state: tsp-en1-default-state {
 		pins = "gpio32";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 865fe7cc3951..4babd0bbe5d6 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -52,6 +52,48 @@
 		reg = <0x80000000 0>;
 	};
 
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <GIC_PPI 10 0x304>;
@@ -112,9 +154,26 @@
 				     <GIC_PPI 3 0x301>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
+		qfprom: efuse@700000 {
+			compatible = "qcom,msm8960-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
+
+			tsens_backup: backup-calib@414 {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
@@ -127,7 +186,7 @@
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
+			compatible = "qcom,gcc-msm8960", "syscon";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
@@ -135,6 +194,18 @@
 				 <&pxo_board>,
 				 <&lcc PLL4>;
 			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <5>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		lcc: clock-controller@28000000 {
@@ -279,7 +350,7 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00051180>;
 			status = "disabled";
-			reg = <0x12180000 0x8000>;
+			reg = <0x12180000 0x2000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -289,13 +360,25 @@
 			max-frequency = <192000000>;
 			no-1-8-v;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x4000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		sdcc1: mmc@12400000 {
 			status = "disabled";
 			compatible = "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12400000 0x8000>;
+			reg = <0x12400000 0x2000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -305,6 +388,18 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x4000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index e3f9c56a778c..7e119370f337 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interconnect/qcom,msm8974.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -1871,10 +1872,10 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1961,8 +1962,10 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -2032,8 +2035,10 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 39530eb580ea..20fdae9825e0 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -57,7 +57,7 @@
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX55_CX>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "perf";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 6b23ee676c9e..c8e312dcd26b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -58,7 +58,7 @@
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX65_CX_AO>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "perf";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/Makefile
index 833a02447ecf..947c7fe02803 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/Makefile
@@ -30,4 +30,5 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
 	r9a06g032-rzn1d400-db.dtb \
+	r9a06g032-rzn1d400-eb.dtb \
 	sh73a0-kzm9g.dtb
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
index 31cdca3e623c..2de047393652 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
@@ -8,8 +8,10 @@
 
 /dts-v1/;
 
-#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/net/pcs-rzn1-miic.h>
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
 
 #include "r9a06g032.dtsi"
 
@@ -24,6 +26,68 @@
 	aliases {
 		serial0 = &uart0;
 	};
+
+	keyboard {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		switch-1 {
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			debounce-interval = <20>;
+			gpios = <&pca9698 8 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			debounce-interval = <20>;
+			gpios = <&pca9698 9 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+			gpios = <&pca9698 10 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+			gpios = <&pca9698 11 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-5 {
+			linux,code = <KEY_5>;
+			label = "SW1-5";
+			debounce-interval = <20>;
+			gpios = <&pca9698 12 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			linux,code = <KEY_6>;
+			label = "SW1-6";
+			debounce-interval = <20>;
+			gpios = <&pca9698 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-7 {
+			linux,code = <KEY_7>;
+			label = "SW1-7";
+			debounce-interval = <20>;
+			gpios = <&pca9698 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-8 {
+			linux,code = <KEY_8>;
+			label = "SW1-8";
+			debounce-interval = <20>;
+			gpios = <&pca9698 15 GPIO_ACTIVE_LOW>;
+		};
+
+	};
 };
 
 &can0 {
@@ -57,6 +121,44 @@
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&pins_i2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9698: gpio@20 {
+		compatible = "nxp,pca9698";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/* configure the analog switch to let i2c2 access the eeprom */
+		max4662-in1-hog {
+			gpio-hog;
+			gpios = <16 0>;
+			output-high;
+		};
+		max4662-in2-hog {
+			gpio-hog;
+			gpios = <17 0>;
+			output-low;
+		};
+		max4662-in3-hog {
+			gpio-hog;
+			gpios = <18 0>;
+			output-low;
+		};
+	};
+
+	/* Some revisions may have a 24cs64 at address 0x58 */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
 &mii_conv4 {
 	renesas,miic-input = <MIIC_SWITCH_PORTB>;
 	status = "okay";
@@ -68,6 +170,9 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_cpld>;
+
 	pins_can0: pins_can0 {
 		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
 			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
@@ -80,6 +185,13 @@
 		drive-strength = <6>;
 	};
 
+	pins_cpld: pins-cpld {
+		pinmux = <RZN1_PINMUX(119, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(120, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(121, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(122, RZN1_FUNC_USB)>;
+	};
+
 	pins_eth3: pins_eth3 {
 		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
 			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
@@ -114,6 +226,12 @@
 		bias-disable;
 	};
 
+	pins_i2c2: pins_i2c2 {
+		pinmux = <RZN1_PINMUX(115, RZN1_FUNC_I2C)>,
+			 <RZN1_PINMUX(116, RZN1_FUNC_I2C)>;
+		drive-strength = <12>;
+	};
+
 	pins_mdio1: pins_mdio1 {
 		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
 			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
@@ -174,6 +292,10 @@
 	status = "okay";
 };
 
+&udc {
+	status = "okay";
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
new file mode 100644
index 000000000000..97a339b30d76
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-EB Board
+ *
+ * Copyright (C) 2023 Schneider-Electric
+ *
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "r9a06g032-rzn1d400-db.dts"
+
+/ {
+	model = "RZN1D-EB Board";
+	compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
+		     "renesas,r9a06g032";
+};
+
+&gmac1 {
+	pinctrl-0 = <&pins_eth0>, <&pins_mdio0>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy_mii0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy_mii0: ethernet-phy@8 {
+			reg = <8>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* Sensors are different across revisions. All are LM75B compatible */
+	sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+};
+
+&mii_conv1 {
+	renesas,miic-input = <MIIC_GMAC1_PORT>;
+	status = "okay";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <MIIC_SWITCH_PORTD>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <MIIC_SWITCH_PORTC>;
+	status = "okay";
+};
+
+&pci_usb {
+	status = "okay";
+};
+
+&pinctrl {
+	pins_eth0: pins-eth0 {
+		pinmux = <RZN1_PINMUX(0, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(1, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(2, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(3, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(4, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(5, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(6, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(7, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(8, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(9, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(10, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(11, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth1: pins-eth1 {
+		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth2: pins-eth2 {
+		pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_mdio0: pins-mdio0 {
+		pinmux = <RZN1_PINMUX(150, RZN1_FUNC_MDIO0_GMAC0)>,
+			 <RZN1_PINMUX(151, RZN1_FUNC_MDIO0_GMAC0)>;
+	};
+
+	pins_sdio1: pins-sdio1 {
+		pinmux = <RZN1_PINMUX(95, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(97, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(98, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(99, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(100, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(101, RZN1_FUNC_SDIO_E)>,
+			 <RZN1_PINMUX(102, RZN1_FUNC_SDIO_E)>;
+	};
+
+	pins_sdio1_clk: pins-sdio1-clk {
+		pinmux = <RZN1_PINMUX(96, RZN1_FUNC_SDIO)>;
+		drive-strength = <12>;
+	};
+
+	pins_uart2: pins-uart2 {
+		pinmux = <RZN1_PINMUX(105, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(106, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(107, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(108, RZN1_FUNC_UART2)>;
+		bias-disable;
+	};
+};
+
+&sdio1 {
+	pinctrl-0 = <&pins_sdio1>, <&pins_sdio1_clk>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
+		    <&pins_mdio1>;
+
+	mdio {
+		/* CN15 and CN16 switches must be configured in MDIO2 mode */
+		switch0phy1: ethernet-phy@1 {
+			reg = <1>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+
+		switch0phy10: ethernet-phy@10 {
+			reg = <10>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&switch_port2 {
+	label = "lan2";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy10>;
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan3";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pins_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+	uart-has-rtscts;
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 87e03446fb4d..80ad1fdc77a0 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -268,6 +268,28 @@
 			status = "disabled";
 		};
 
+		i2c1: i2c@40063000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40063000 0x100>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C0>, <&sysctrl R9A06G032_CLK_I2C0>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40064000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40064000 0x100>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C1>, <&sysctrl R9A06G032_CLK_I2C1>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pinctrl: pinctrl@40067000 {
 			compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
 			reg = <0x40067000 0x1000>, <0x51000000 0x480>;
@@ -276,6 +298,30 @@
 			status = "okay";
 		};
 
+		sdio1: mmc@40100000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40100000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO0>, <&sysctrl R9A06G032_HCLK_SDIO0>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
+		sdio2: mmc@40101000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40101000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO1>, <&sysctrl R9A06G032_HCLK_SDIO1>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
 		nand_controller: nand-controller@40102000 {
 			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
 			reg = <0x40102000 0x2000>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 4f928c7898e9..ae2f84a4e922 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,6 +8,12 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -382,6 +388,18 @@
 	status = "okay";
 };
 
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 63b9912be06a..fca21ebb224b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -213,6 +213,8 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -224,6 +226,8 @@
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
 		dr_mode = "host";
+		phys = <&usb2phy_host>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -342,6 +346,37 @@
 	grf: syscon@20008000 {
 		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3036-usb2phy";
+			reg = <0x017c 0x20>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
 
 		power: power-controller {
 			compatible = "rockchip,rk3036-power-controller";
@@ -398,8 +433,9 @@
 		compatible = "rockchip,rk3036-inno-hdmi";
 		reg = <0x20034000 0x4000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru  PCLK_HDMI>;
-		clock-names = "pclk";
+		clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+		clock-names = "pclk", "ref";
+		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
 		#sound-dai-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
index ada7dbfc06a5..de42d1855121 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
@@ -19,6 +19,17 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 1000>;
@@ -58,6 +69,28 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&gpu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -216,6 +249,10 @@
 	status = "okay";
 };
 
+&vop0 {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
index d4572146d135..c49099954c28 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -48,7 +48,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -87,31 +86,38 @@
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-408000000 {
 			opp-hz = /bits/ 64 <408000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-696000000 {
 			opp-hz = /bits/ 64 <696000000>;
 			opp-microvolt = <975000 975000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1075000 1075000 1325000>;
 			opp-suspend;
+			clock-latency-ns = <40000>;
 		};
 		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000 1200000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1325000 1325000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3188.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3188.dtsi
index 44b54af0bbf9..850bd6e67895 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3188.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3188.dtsi
@@ -23,7 +23,6 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			resets = <&cru SRST_CORE0>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
index 96421355c274..cd11a018105b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -36,7 +36,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			enable-method = "psci";
 		};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
index 3f1d640afafa..42d705b544ec 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -70,7 +70,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -81,7 +80,6 @@
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -92,7 +90,6 @@
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -103,7 +100,6 @@
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -116,6 +112,7 @@
 		opp-126000000 {
 			opp-hz = /bits/ 64 <126000000>;
 			opp-microvolt = <900000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
index f3291f3bbc6f..42a4d72597a5 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -32,7 +32,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <75>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
index 9a87dc0d5f66..1aedcd3a2167 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -323,15 +323,15 @@
 };
 
 &pmu_io_domains {
-	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio0-supply = <&vcc3v3_sys>;
 	pmuio1-supply = <&vcc3v3_sys>;
 	vccio1-supply = <&vcc_1v8>;
 	vccio2-supply = <&vccio_sd>;
 	vccio3-supply = <&vcc3v3_sd>;
-	vccio4-supply = <&vcc_dovdd>;
-	vccio5-supply = <&vcc_1v8>;
-	vccio6-supply = <&vcc_1v8>;
-	vccio7-supply = <&vcc_dovdd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
@@ -342,16 +342,14 @@
 
 &sdio {
 	bus-width = <4>;
-	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <50000000>;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 	rockchip,default-sample-phase = <90>;
-	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
index f628d3660493..153514e80c9a 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
@@ -855,7 +855,7 @@
 	assigned-clock-rates = <0>, <50000000>;
 	assigned-clock-parents = <&clocks MOUT_MPLL>;
 
-	wlan@1 {
+	wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gph2>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/st/Makefile
index 60d55516f723..cc9948b9870f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32h747i-disco.dtb \
 	stm32h750i-art-pi.dtb \
 	stm32mp133c-prihmb.dtb \
 	stm32mp135f-dhcor-dhsbc.dtb \
@@ -70,7 +71,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-lxa-tac-gen2.dtb \
 	stm32mp157c-odyssey.dtb \
 	stm32mp157c-osd32mp1-red.dtb \
-	stm32mp157c-phycore-stm32mp1-3.dtb
+	stm32mp157c-phycore-stm32mp1-3.dtb \
+	stm32mp157c-ultra-fly-sbc.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
 	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear1310-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear1310-evb.dts
index ad216571ba57..089bd7db55c7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear1310-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear1310-evb.dts
@@ -205,19 +205,19 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear1340-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear1340-evb.dts
index 9b515b21a633..d24146c3c9e8 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear1340-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear1340-evb.dts
@@ -203,7 +203,7 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
@@ -221,7 +221,7 @@
 			};
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
@@ -238,11 +238,11 @@
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear13xx.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear13xx.dtsi
index 3b6897084e26..76749992394d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear13xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear13xx.dtsi
@@ -174,7 +174,7 @@
 			status = "disabled";
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe4800000 0x1000>;
 			interrupts = <0 64 0x4>;
@@ -182,7 +182,7 @@
 			status = "disabled";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe5800000 0x1000>;
 			interrupts = <0 66 0x4>;
@@ -190,7 +190,7 @@
 			status = "disabled";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe4000000 0x1000>;
 			interrupts = <0 65 0x4>;
@@ -198,7 +198,7 @@
 			status = "disabled";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe5000000 0x1000>;
 			interrupts = <0 67 0x4>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear300-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear300-evb.dts
index 303ef29fb805..7d4e6412d558 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear300-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear300-evb.dts
@@ -119,15 +119,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear310-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear310-evb.dts
index ea0b53036f7b..459182210825 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear310-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear310-evb.dts
@@ -133,15 +133,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear320-evb.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear320-evb.dts
index 3c026d021c92..6ac53d993cf3 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear320-evb.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear320-evb.dts
@@ -142,15 +142,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear320-hmi.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear320-hmi.dts
index 721e5ee7b680..8010918e5257 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear320-hmi.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear320-hmi.dts
@@ -92,7 +92,7 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
@@ -147,11 +147,11 @@
 			};
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear3xx.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear3xx.dtsi
index cc88ebe7a60c..f54bb80ba28a 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear3xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear3xx.dtsi
@@ -73,21 +73,21 @@
 			status = "disabled";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupts = <26>;
 			status = "disabled";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupts = <25>;
 			status = "disabled";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupts = <27>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear600.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear600.dtsi
index 6b67c0ceaed9..9a93367445ca 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/spear600.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/spear600.dtsi
@@ -91,7 +91,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb0: ehci@e1800000 {
+		ehci_usb0: usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -99,7 +99,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb1: ehci@e2000000 {
+		ehci_usb1: usb@e2000000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe2000000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -107,7 +107,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb0: ohci@e1900000 {
+		ohci_usb0: usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -115,7 +115,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb1: ohci@e2100000 {
+		ohci_usb1: usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32f746.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
index 2537b3d47e6f..208f8c6dfc9d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -43,6 +43,7 @@
 #include "../armv7-m.dtsi"
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	#address-cells = <1>;
@@ -245,6 +246,39 @@
 			};
 		};
 
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			interrupts-extended = <&exti 23 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&rcc 1 CLK_LPTIMER>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
 		rtc: rtc@40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
index 7f1d234e1024..8a6db484383d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
@@ -198,7 +198,7 @@
 		};
 	};
 
-	uart4_pins: uart4-0 {
+	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
 			bias-disable;
@@ -211,7 +211,20 @@
 		};
 	};
 
-	usart1_pins: usart1-0 {
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('J', 8, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('J', 9, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
 			bias-disable;
@@ -224,7 +237,20 @@
 		};
 	};
 
-	usart2_pins: usart2-0 {
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
 			bias-disable;
@@ -237,7 +263,7 @@
 		};
 	};
 
-	usart3_pins: usart3-0 {
+	usart3_pins_a: usart3-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
 				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743.dtsi
index b8d4c44c8a82..2f19cfbc57ad 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743.dtsi
@@ -211,6 +211,14 @@
 			};
 		};
 
+		uart8: serial@40007c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			status = "disabled";
+			clocks = <&rcc UART8_CK>;
+		};
+
 		usart1: serial@40011000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743i-disco.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743i-disco.dts
index 2b452883a708..8451a54a9a08 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743i-disco.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743i-disco.dts
@@ -105,7 +105,7 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743i-eval.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743i-eval.dts
index 5c5d8059bdc7..4b0ced27b80e 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h743i-eval.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h743i-eval.dts
@@ -145,7 +145,7 @@
 };
 
 &usart1 {
-	pinctrl-0 = <&usart1_pins>;
+	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h747i-disco.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h747i-disco.dts
new file mode 100644
index 000000000000..99f0255dae8e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h747i-disco.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32H747i-Discovery board";
+	compatible = "st,stm32h747i-disco", "st,stm32h747";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &uart8;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpioi 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+		};
+		led-red {
+			gpios = <&gpioi 14 GPIO_ACTIVE_LOW>;
+		};
+		led-blue {
+			gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+		};
+		button-1 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpiok 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-2 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpiok 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-3 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			gpios = <&gpiok 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-4 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpiok 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-5 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpiok 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h750i-art-pi.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
index 44c307f8b09c..56c53e262da7 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
@@ -167,7 +167,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -197,14 +197,14 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "disabled";
 };
 
 &usart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins>;
+	pinctrl-0 = <&usart3_pins_a>;
 	dmas = <&dmamux1 45 0x400 0x05>,
 	       <&dmamux1 46 0x400 0x05>;
 	dma-names = "rx", "tx";
@@ -221,7 +221,7 @@
 };
 
 &uart4 {
-	pinctrl-0 = <&uart4_pins>;
+	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp131.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp131.dtsi
index 8512a6e46b33..492bcf586361 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1018,6 +1018,9 @@
 				reg = <0x4 0x2>;
 				bits = <0 12>;
 			};
+			vrefint: vrefin-cal@52 {
+				reg = <0x52 0x2>;
+			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
 			};
@@ -1063,6 +1066,8 @@
 					interrupts = <0>;
 					dmas = <&dmamux1 10 0x400 0x80000001>;
 					dma-names = "rx";
+					nvmem-cells = <&vrefint>;
+					nvmem-cell-names = "vrefint";
 					status = "disabled";
 
 					channel@13 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp133.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp133.dtsi
index 73e470019ce4..e48838374f0d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -60,6 +60,8 @@
 			interrupts = <0>;
 			dmas = <&dmamux1 9 0x400 0x80000001>;
 			dma-names = "rx";
+			nvmem-cells = <&vrefint>;
+			nvmem-cell-names = "vrefint";
 			status = "disabled";
 
 			channel@18 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp135f-dk.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 119cb6d01475..9d67ba86f258 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -421,7 +421,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
index 6236ce2a6968..c18156807027 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -287,7 +287,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 1YN */
+	brcmf: wifi@1 {	/* muRata 1YN */
 		reg = <1>;
 		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpioe>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
index 6a5a4af25bd9..84497026a106 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
@@ -46,7 +46,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 324f7bb988d1..1b34fbe10b4f 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -115,7 +115,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
new file mode 100644
index 000000000000..ac42d462d449
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -0,0 +1,1152 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Ultratronik GmbH 2024-2025 - All Rights Reserved
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STM STM32MP15x Ultratronik MMI_A7 board";
+	compatible = "ultratronik,stm32mp157c-ultra-fly-sbc", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &uart5;
+		serial2 = &uart7;
+		serial3 = &usart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@f8000000 {
+			reg = <0xf8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led0{
+			label = "buzzer";
+			gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "none";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			label = "KEY1";
+			gpios = <&gpiod 1 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			label = "KEY2";
+			gpios = <&gpiod 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <3>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ux_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0 1 6 13>; /* ANA0 ANA1 PF12 PC3 */
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 12>; /* ANA0 ANA1 INT_TEMP*/
+		st,min-sample-time-nsecs = <10000>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;  /* Channel 12 = internal temperature sensor */
+			label = "internal_temp";
+		};
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ux_ch1_pins_a &dac_ux_ch2_pins_a>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	compatible = "st,stm32-thermal";
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_ux_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_ux_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+	"#PMIC_IRQ", "", "", "", "DAC1", "DAC2", "", "",
+	"", "", "OTG_ID", "TIM1_4", "#LED1", "#LED2", "#LED3", "";
+};
+
+&gpiob {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioc {
+	gpio-line-names =
+	"#AMP_SD", "", "", "ANA5", "", "", "", "",
+	"", "", "", "", "", "PMIC_WAKEUP", "", "";
+};
+
+&gpiod {
+	gpio-line-names =
+	"#G_INT", "#TASTER1", "", "", "GPIO1", "GPIO2", "", "#TASTER2",
+	"", "", "", "", "", "", "TIM4_3", "TIM4_4";
+};
+
+&gpioe {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "PWM2", "", "", "", "", "";
+};
+
+&gpiof {
+	gpio-line-names =
+	"#SD1_CD", "SD1_WP", "BUZZER", "#DISP_POW", "BKL_POW", "#CAM_RES", "", "",
+	"", "TIM17_1N", "", "CAM_PWDN", "ANA6", "ENA_USB", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+	"#ESP_RES", "#ESP_BOOT", "GPIO3", "GPIO4", "", "", "", "",
+	"", "#TOUCH_IRQ", "", "", "", "", "", "#PCAP_RES";
+};
+
+&gpioh {
+	gpio-line-names =
+	"", "CAM_LED", "", "USB_OTG_PWR", "", "USB_OTG_OC", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names =
+	"BKL_PWM", "", "", "", "", "", "", "",
+	"#SPI_CS0", "", "", "#SPI_CS1", "", "", "", "";
+};
+
+&gpioj {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpiok {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioz {
+	gpio-line-names =
+	"", "", "", "#SPI_CS2", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_ux_pins_a>;
+	pinctrl-1 = <&i2c1_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_ux_pins_a>;
+	pinctrl-1 = <&i2c4_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: pmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&exti 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1600000>;/* offset +200 mv ??? */
+				regulator-max-microvolt = <1600000>;/* real 1800000 */
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_ux_pins_a>;
+	pinctrl-1 = <&m_can2_ux_sleep_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+
+	adc1_ux_ain_pins_a: adc1-ux-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F',12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('C', 3, ANALOG)>; /* ADC2 in13 */
+		};
+	};
+
+	dac_ux_ch1_pins_a: dac-ux-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ux_ch2_pins_a: dac-ux-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_a: rgmii-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_sleep_a: rgmii-ux-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	i2c1_ux_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_ux_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	m_can2_ux_pins_a: m-can2-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN1_TX */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_ux_sleep_pins_a: m-can2-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN1_RX */
+		};
+	};
+	pwm1_ux_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, AF1)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, AF1)>; /* TIM1_CH2N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_ux_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, ANALOG)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, ANALOG)>; /* TIM1_CH2N */
+		};
+	};
+
+	pwm4_ux_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-disable;
+		};
+	};
+
+	pwm4_ux_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm5_ux_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_ux_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	pwm17_ux_pins_a: pwm17-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, AF1)>; /* TIM17_CH1N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm17_ux_sleep_pins_a: pwm17-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM17_CH1N */
+		};
+	};
+
+	qspi_bk1_ux_pins_a: qspi-bk1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, AF9)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B',10, AF9)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_ux_sleep_pins_a: qspi-bk1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B',10, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_clk_ux_pins_a: qspi-clk_ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_ux_sleep_pins_a: qspi-clk-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	sai2a_ux_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_ux_sleep_pins_a: sai2a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sdmmc1_ux_b4_pins_a: sdmmc1-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C',10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C',11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc2_ux_b4_pins_a: sdmmc2-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_od_pins_a: sdmmc2-ux-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_sleep_pins_a: sdmmc2-ux-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				<STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_ux_d47_pins_a: sdmmc2-ux-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_d47_sleep_pins_a: sdmmc2-ux-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	uart4_ux_pins_a: uart4-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_ux_idle_pins_a: uart4-ux-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+		};
+
+	uart4_ux_sleep_pins_a: uart4-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart5_ux_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
+	uart5_ux_idle_pins_a: uart5-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* UART5_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX*/
+			bias-disable;
+		};
+	};
+
+	uart5_ux_sleep_pins_a: uart5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* UART5_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* UART5_RX */
+		};
+	};
+
+	uart7_ux_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+	};
+
+	uart7_ux_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_ux_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>, /* USART7_RTS/DE */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* USART7_RX */
+		};
+	};
+};
+
+&pinctrl_z {
+
+	i2c4_ux_pins_a: i2c4-ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_ux_pins_sleep_a: i2c4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_ux_pins_a: spi1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	spi1_ux_sleep_pins_a: spi1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+				<STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+		};
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_ux_pins_a &qspi_bk1_ux_pins_a>;
+	pinctrl-1 = <&qspi_clk_ux_sleep_pins_a &qspi_bk1_ux_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x1000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <133000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_ux_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_ux_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_ux_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_ux_b4_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_ux_b4_od_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_ux_b4_sleep_pins_a &sdmmc2_ux_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_ux_pins_a>;
+	pinctrl-1 = <&spi1_ux_sleep_pins_a>;
+	status = "okay";
+	cs-gpios = <&gpioi 8 0>, <&gpioi 11 0>, <&gpioz 3 0>;
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_ux_pins_a>;
+		pinctrl-1 = <&pwm1_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	dmas = <&dmamux1 31 0x400 0x5>;
+	dma-names = "ch3";
+	status = "okay";
+
+	pwm4_4: pwm {
+		pinctrl-0 = <&pwm4_ux_pins_a>;
+		pinctrl-1 = <&pwm4_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm5_4: pwm {
+		pinctrl-0 = <&pwm5_ux_pins_a>;
+		pinctrl-1 = <&pwm5_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers17 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm17_4: pwm {
+		pinctrl-0 = <&pwm17_ux_pins_a>;
+		pinctrl-1 = <&pwm17_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@16 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
+	pinctrl-0 = <&uart4_ux_pins_a>;
+	pinctrl-1 = <&uart4_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart4_ux_idle_pins_a>;
+	pinctrl-3 = <&uart4_ux_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart5_ux_pins_a>;
+	pinctrl-1 = <&uart5_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart5_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_ux_pins_a>;
+	pinctrl-1 = <&uart7_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart7_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&usart1 {
+	/*Muxing happens in uboot*/
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 343a4613dfca..aceeff6c38ba 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -435,7 +435,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/davinci/da850-evm.dts linux-libre-6.16-gnu/arch/arm/boot/dts/ti/davinci/da850-evm.dts
index 1f5cd35f8b74..38a191fb0414 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/davinci/da850-evm.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/davinci/da850-evm.dts
@@ -60,7 +60,7 @@
 			sync-edge = <0>;
 			sync-ctrl = <1>;
 			raster-order = <0>;
-			fifo-th = <0>;
+			fifo-th = <1>;
 		};
 
 		display-timings {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/am335x-evm.dts linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/am335x-evm.dts
index 6e71d4d51ac8..6607cd911ee9 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/am335x-evm.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/am335x-evm.dts
@@ -388,7 +388,7 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
-
+	wakeup-source;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
index 4bde3342bb95..c50ca572d1b9 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -816,8 +816,6 @@
 		reg = <0x0c>;
 
 		VANA-supply = <&vaux4>;
-
-		#io-channel-cells = <0>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap3.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap3.dtsi
index 92cd4c99dae7..817474ee2d13 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap3.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap3.dtsi
@@ -862,14 +862,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			usbhsohci: ohci@48064400 {
+			usbhsohci: usb@48064400 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupts = <76>;
 				remote-wakeup-connected;
 			};
 
-			usbhsehci: ehci@48064800 {
+			usbhsehci: usb@48064800 {
 				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupts = <77>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
index 150dd84c9e0f..4ee53dfb71b4 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
@@ -302,14 +302,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
index 97706d6296a6..05c871d31d7b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
@@ -130,6 +130,12 @@
 		clock-frequency = <19200000>;
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
+
 	/* regulator for wl12xx on sdio5 */
 	wl12xx_vmmc: wl12xx_vmmc {
 		pinctrl-names = "default";
@@ -361,10 +367,8 @@
 	 */
 	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 - WLAN_EN */
 			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
@@ -387,6 +391,22 @@
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
 		>;
 	};
+
+	bt_pins: bt-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)	  /* gpmc_a22.gpio_46 - BTEN */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_cts.uart2_cts - HCI */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)	  /* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)	  /* uart2_tx.uart2_tx */
+		>;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -408,6 +428,7 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		#clock-cells = <1>;
 		system-power-controller;
 	};
 
@@ -488,6 +509,7 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -523,8 +545,19 @@
 };
 
 &uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
index fe7b156d10ed..a933fe560834 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
@@ -49,22 +49,6 @@
 			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
-
-	bt_pins: bt-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
-		>;
-	};
-
-	uart2_pins: uart2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
 };
 
 &led_wkgpio_pins {
@@ -96,19 +80,3 @@
 &gpio1_target {
 	 ti,no-reset-on-init;
 };
-
-&wl12xx_gpio {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-	>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins &bt_pins>;
-	bluetooth: tiwi {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
-	};
-};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
index 3b505fe415ed..9f6100c7c34d 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
@@ -331,14 +331,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/Makefile linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/Makefile
index 255f4403af91..6fd29c41f366 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/Makefile
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/Makefile
@@ -4,4 +4,5 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb \
 	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
+	wm8850-w70v2.dtb \
+	wm8950-apc-rock.dtb
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/vt8500.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/vt8500.dtsi
index f23cb5ee11ae..d1dd37220d41 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/vt8500.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/vt8500.dtsi
@@ -55,6 +55,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -106,10 +111,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8505.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8505.dtsi
index d9e1280372c5..2b1819f0c541 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8505.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8505.dtsi
@@ -66,6 +66,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -204,10 +209,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007100 {
+		usb@d8007100 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007100 0x200>;
 			interrupts = <1>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8650.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8650.dtsi
index 35d12d77efc0..042eec78c085 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8650.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8650.dtsi
@@ -62,6 +62,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -176,10 +181,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8750.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8750.dtsi
index b292f85d4e69..56342aa1d993 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8750.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8750.dtsi
@@ -68,6 +68,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -248,10 +253,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8850.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8850.dtsi
index c61717ebb4f1..03e72f28d31b 100644
--- linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8850.dtsi
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8850.dtsi
@@ -65,6 +65,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -235,10 +240,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
new file mode 100644
index 000000000000..58b3c8deb4f2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/dts-v1/;
+/include/ "wm8950.dtsi"
+
+/ {
+	model = "VIA APC Rock";
+	compatible = "via,apc-rock", "wm,wm8950";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm/boot/dts/vt8500/wm8950.dtsi linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8950.dtsi
new file mode 100644
index 000000000000..31fba05d3c3e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/boot/dts/vt8500/wm8950.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/* No differences have been discovered vs. WM8850, but chip markings differ */
+/include/ "wm8850.dtsi"
+
+/ {
+	compatible = "wm,wm8950";
+};
diff --git linux-libre-6.15-gnu/arch/arm/common/sa1111.c linux-libre-6.16-gnu/arch/arm/common/sa1111.c
index 9846f30990f7..86b271cc29e1 100644
--- linux-libre-6.15-gnu/arch/arm/common/sa1111.c
+++ linux-libre-6.16-gnu/arch/arm/common/sa1111.c
@@ -416,9 +416,9 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 
-	sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
-						  &sa1111_irqdomain_ops,
-						  sachip);
+	sachip->irqdomain = irq_domain_create_linear(NULL, SA1111_IRQ_NR,
+						     &sa1111_irqdomain_ops,
+						     sachip);
 	if (!sachip->irqdomain) {
 		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 		return -ENOMEM;
@@ -563,7 +563,7 @@ static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
 	return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
 }
 
-static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+static int sa1111_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -574,6 +574,8 @@ static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
 static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
@@ -613,7 +615,7 @@ static int sa1111_setup_gpios(struct sa1111 *sachip)
 	sachip->gc.direction_input = sa1111_gpio_direction_input;
 	sachip->gc.direction_output = sa1111_gpio_direction_output;
 	sachip->gc.get = sa1111_gpio_get;
-	sachip->gc.set = sa1111_gpio_set;
+	sachip->gc.set_rv = sa1111_gpio_set;
 	sachip->gc.set_multiple = sa1111_gpio_set_multiple;
 	sachip->gc.to_irq = sa1111_gpio_to_irq;
 	sachip->gc.base = -1;
diff --git linux-libre-6.15-gnu/arch/arm/common/scoop.c linux-libre-6.16-gnu/arch/arm/common/scoop.c
index 0b08b6621878..2d3ee76c8e17 100644
--- linux-libre-6.15-gnu/arch/arm/common/scoop.c
+++ linux-libre-6.16-gnu/arch/arm/common/scoop.c
@@ -63,7 +63,8 @@ static void __scoop_gpio_set(struct scoop_dev *sdev,
 	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
 }
 
-static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int scoop_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
 {
 	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -73,6 +74,8 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	__scoop_gpio_set(sdev, offset, value);
 
 	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
 }
 
 static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -215,7 +218,7 @@ static int scoop_probe(struct platform_device *pdev)
 		devptr->gpio.label = dev_name(&pdev->dev);
 		devptr->gpio.base = inf->gpio_base;
 		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
-		devptr->gpio.set = scoop_gpio_set;
+		devptr->gpio.set_rv = scoop_gpio_set;
 		devptr->gpio.get = scoop_gpio_get;
 		devptr->gpio.direction_input = scoop_gpio_direction_input;
 		devptr->gpio.direction_output = scoop_gpio_direction_output;
diff --git linux-libre-6.15-gnu/arch/arm/configs/davinci_all_defconfig linux-libre-6.16-gnu/arch/arm/configs/davinci_all_defconfig
index 70b8c78386f4..e2ddaca0f89d 100644
--- linux-libre-6.15-gnu/arch/arm/configs/davinci_all_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/davinci_all_defconfig
@@ -14,7 +14,6 @@ CONFIG_ARCH_MULTIPLATFORM=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
diff --git linux-libre-6.15-gnu/arch/arm/configs/exynos_defconfig linux-libre-6.16-gnu/arch/arm/configs/exynos_defconfig
index e81a5d6c1c20..f71af368674c 100644
--- linux-libre-6.15-gnu/arch/arm/configs/exynos_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/exynos_defconfig
@@ -167,7 +167,7 @@ CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
 CONFIG_MFD_MAX8998=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_STMPE_I2C=y
 CONFIG_MFD_TPS65090=y
@@ -349,7 +349,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_USER=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_XTS=m
@@ -364,7 +364,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
diff --git linux-libre-6.15-gnu/arch/arm/configs/milbeaut_m10v_defconfig linux-libre-6.16-gnu/arch/arm/configs/milbeaut_m10v_defconfig
index 275ddf7a3a14..242e7d5a3f68 100644
--- linux-libre-6.15-gnu/arch/arm/configs/milbeaut_m10v_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/milbeaut_m10v_defconfig
@@ -93,15 +93,13 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_KEYS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 # CONFIG_CRYPTO_ECHAINIV is not set
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
diff --git linux-libre-6.15-gnu/arch/arm/configs/multi_v5_defconfig linux-libre-6.16-gnu/arch/arm/configs/multi_v5_defconfig
index cf6180b4296e..b523bc246c09 100644
--- linux-libre-6.15-gnu/arch/arm/configs/multi_v5_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/multi_v5_defconfig
@@ -12,7 +12,6 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX25=y
diff --git linux-libre-6.15-gnu/arch/arm/configs/multi_v7_defconfig linux-libre-6.16-gnu/arch/arm/configs/multi_v7_defconfig
index ad037c175fdb..50c170b4619f 100644
--- linux-libre-6.15-gnu/arch/arm/configs/multi_v7_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/multi_v7_defconfig
@@ -612,7 +612,7 @@ CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RN5T618=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
@@ -1121,25 +1121,6 @@ CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
 CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -1203,7 +1184,7 @@ CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m
 CONFIG_PWM_FSL_FTM=m
 CONFIG_PWM_MESON=m
-CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_RCAR=m
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PWM_ROCKCHIP=m
 CONFIG_PWM_SAMSUNG=m
@@ -1301,7 +1282,6 @@ CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
diff --git linux-libre-6.15-gnu/arch/arm/configs/omap2plus_defconfig linux-libre-6.16-gnu/arch/arm/configs/omap2plus_defconfig
index 75b326bc7830..9f9780c8e62a 100644
--- linux-libre-6.15-gnu/arch/arm/configs/omap2plus_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/omap2plus_defconfig
@@ -608,6 +608,7 @@ CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2606MVV=m
+CONFIG_LEDS_TCA6507=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -642,6 +643,8 @@ CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
+CONFIG_BMA180=m
+CONFIG_BMC150_ACCEL=m
 CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_KXCJK1013=m
 CONFIG_CPCAP_ADC=m
@@ -649,10 +652,15 @@ CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_TWL4030_MADC=m
 CONFIG_TWL6030_GPADC=m
+CONFIG_BMG160=m
 CONFIG_MPU3050_I2C=m
+CONFIG_ITG3200=m
+CONFIG_BOSCH_BNO055_I2C=m
 CONFIG_INV_MPU6050_I2C=m
 CONFIG_SENSORS_ISL29028=m
 CONFIG_AK8975=m
+CONFIG_BMC150_MAGN_I2C=m
+CONFIG_SENSORS_HMC5843_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
@@ -697,7 +705,6 @@ CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
diff --git linux-libre-6.15-gnu/arch/arm/configs/pxa_defconfig linux-libre-6.16-gnu/arch/arm/configs/pxa_defconfig
index 24fca8608554..ff29c5b0e9c9 100644
--- linux-libre-6.15-gnu/arch/arm/configs/pxa_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/pxa_defconfig
@@ -335,7 +335,7 @@ CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8907=m
 CONFIG_EZX_PCAP=y
 CONFIG_UCB1400_CORE=m
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -636,10 +636,9 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_TIMER_STATS=y
 CONFIG_SECURITY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -660,7 +659,6 @@ CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_FONTS=y
diff --git linux-libre-6.15-gnu/arch/arm/configs/shmobile_defconfig linux-libre-6.16-gnu/arch/arm/configs/shmobile_defconfig
index 8c30ed14e52c..7c3d6a8f0038 100644
--- linux-libre-6.15-gnu/arch/arm/configs/shmobile_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/shmobile_defconfig
@@ -63,6 +63,7 @@ CONFIG_SMSC_PHY=y
 CONFIG_CAN_RCAR=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
@@ -84,6 +85,7 @@ CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_EMEV2=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RIIC=y
@@ -104,7 +106,7 @@ CONFIG_GPIO_PCF857X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_RCAR_THERMAL=y
@@ -174,6 +176,9 @@ CONFIG_USB_RENESAS_USBHS_UDC=y
 CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
@@ -195,29 +200,10 @@ CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
 CONFIG_RZ_DMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_IIO=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
-CONFIG_PWM_RCAR=y
+CONFIG_PWM_RENESAS_RCAR=y
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PHY_RCAR_GEN2=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
diff --git linux-libre-6.15-gnu/arch/arm/configs/spitz_defconfig linux-libre-6.16-gnu/arch/arm/configs/spitz_defconfig
index ffec59e3f49c..ac2a0f998c73 100644
--- linux-libre-6.15-gnu/arch/arm/configs/spitz_defconfig
+++ linux-libre-6.16-gnu/arch/arm/configs/spitz_defconfig
@@ -215,7 +215,7 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_AES=m
diff --git linux-libre-6.15-gnu/arch/arm/crypto/Kconfig linux-libre-6.16-gnu/arch/arm/crypto/Kconfig
index 23e4ea067ddb..7efb9a8596e4 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/arm/crypto/Kconfig
@@ -46,30 +46,6 @@ config CRYPTO_NHPOLY1305_NEON
 	  Architecture: arm using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_POLY1305_ARM
-	tristate
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	default CRYPTO_LIB_POLY1305_INTERNAL
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: arm optionally using
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_BLAKE2S_ARM
-	bool "Hash functions: BLAKE2s"
-	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-	help
-	  BLAKE2s cryptographic hash function (RFC 7693)
-
-	  Architecture: arm
-
-	  This is faster than the generic implementations of BLAKE2s and
-	  BLAKE2b, but slower than the NEON implementation of BLAKE2b.
-	  There is no NEON implementation of BLAKE2s, since NEON doesn't
-	  really help with it.
-
 config CRYPTO_BLAKE2B_NEON
 	tristate "Hash functions: BLAKE2b (NEON)"
 	depends on KERNEL_MODE_NEON
@@ -117,27 +93,6 @@ config CRYPTO_SHA1_ARM_CE
 
 	  Architecture: arm using ARMv8 Crypto Extensions
 
-config CRYPTO_SHA2_ARM_CE
-	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA256_ARM
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm using
-	  - ARMv8 Crypto Extensions
-
-config CRYPTO_SHA256_ARM
-	tristate "Hash functions: SHA-224 and SHA-256 (NEON)"
-	select CRYPTO_HASH
-	depends on !CPU_V7M
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm using
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_SHA512_ARM
 	tristate "Hash functions: SHA-384 and SHA-512 (NEON)"
 	select CRYPTO_HASH
@@ -172,7 +127,6 @@ config CRYPTO_AES_ARM_BS
 	select CRYPTO_AES_ARM
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_SIMD
 	help
 	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
 	  with block cipher modes:
@@ -200,7 +154,6 @@ config CRYPTO_AES_ARM_CE
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_SIMD
 	help
 	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
 	   with block cipher modes:
@@ -214,17 +167,5 @@ config CRYPTO_AES_ARM_CE
 	  Architecture: arm using:
 	  - ARMv8 Crypto Extensions
 
-config CRYPTO_CHACHA20_NEON
-	tristate
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	default CRYPTO_LIB_CHACHA_INTERNAL
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: arm using:
-	  - NEON (Advanced SIMD) extensions
-
 endmenu
 
diff --git linux-libre-6.15-gnu/arch/arm/crypto/Makefile linux-libre-6.16-gnu/arch/arm/crypto/Makefile
index 3d0e23ff9e74..8479137c6e80 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/Makefile
+++ linux-libre-6.16-gnu/arch/arm/crypto/Makefile
@@ -7,37 +7,25 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
 obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
-obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
-obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
 obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
 obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
 
 aes-arm-y	:= aes-cipher-core.o aes-cipher-glue.o
 aes-arm-bs-y	:= aes-neonbs-core.o aes-neonbs-glue.o
 sha1-arm-y	:= sha1-armv4-large.o sha1_glue.o
 sha1-arm-neon-y	:= sha1-armv7-neon.o sha1_neon_glue.o
-sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
-sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
 sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
 sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
-sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
 aes-arm-ce-y	:= aes-ce-core.o aes-ce-glue.o
 ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
-chacha-neon-y := chacha-scalar-core.o chacha-glue.o
-chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
-poly1305-arm-y := poly1305-core.o poly1305-glue.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
 curve25519-neon-y := curve25519-core.o curve25519-glue.o
 
@@ -47,14 +35,8 @@ quiet_cmd_perl = PERL    $@
 $(obj)/%-core.S: $(src)/%-armv4.pl
 	$(call cmd,perl)
 
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
+clean-files += sha512-core.S
 
 aflags-thumb2-$(CONFIG_THUMB2_KERNEL)  := -U__thumb2__ -D__thumb2__=1
 
-AFLAGS_sha256-core.o += $(aflags-thumb2-y)
 AFLAGS_sha512-core.o += $(aflags-thumb2-y)
-
-# massage the perlasm code a bit so we only get the NEON routine if we need it
-poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
-poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-AFLAGS_poly1305-core.o += $(poly1305-aflags-y) $(aflags-thumb2-y)
diff --git linux-libre-6.15-gnu/arch/arm/crypto/aes-ce-glue.c linux-libre-6.16-gnu/arch/arm/crypto/aes-ce-glue.c
index 1cf61f51e766..00591895d540 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/aes-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/aes-ce-glue.c
@@ -10,8 +10,6 @@
 #include <asm/simd.h>
 #include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
@@ -418,29 +416,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
-	unsigned long flags;
-
-	/*
-	 * Temporarily disable interrupts to avoid races where
-	 * cachelines are evicted when the CPU is interrupted
-	 * to do something else.
-	 */
-	local_irq_save(flags);
-	aes_encrypt(ctx, dst, src);
-	local_irq_restore(flags);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int xts_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -586,10 +561,9 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-ce",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -600,10 +574,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-ce",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -615,10 +588,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
-	.base.cra_name		= "__cts(cbc(aes))",
-	.base.cra_driver_name	= "__cts-cbc-aes-ce",
+	.base.cra_name		= "cts(cbc(aes))",
+	.base.cra_driver_name	= "cts-cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -631,10 +603,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cts_cbc_encrypt,
 	.decrypt		= cts_cbc_decrypt,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-ce",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -647,25 +618,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-ce-sync",
-	.base.cra_priority	= 300 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.setkey			= ce_aes_setkey,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-ce",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -679,51 +634,14 @@ static struct skcipher_alg aes_algs[] = { {
 	.decrypt		= xts_decrypt,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs) && aes_simd_algs[i]; i++)
-		simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 module_cpu_feature_match(AES, aes_init);
diff --git linux-libre-6.15-gnu/arch/arm/crypto/aes-neonbs-glue.c linux-libre-6.16-gnu/arch/arm/crypto/aes-neonbs-glue.c
index f6be80b5938b..c60104dc1585 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/aes-neonbs-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/aes-neonbs-glue.c
@@ -8,8 +8,6 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/xts.h>
@@ -59,11 +57,6 @@ struct aesbs_xts_ctx {
 	struct crypto_aes_ctx	tweak_key;
 };
 
-struct aesbs_ctr_ctx {
-	struct aesbs_ctx	key;		/* must be first member */
-	struct crypto_aes_ctx	fallback;
-};
-
 static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			unsigned int key_len)
 {
@@ -200,25 +193,6 @@ static int cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int aesbs_ctr_setkey_sync(struct crypto_skcipher *tfm, const u8 *in_key,
-				 unsigned int key_len)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = aes_expandkey(&ctx->fallback, in_key, key_len);
-	if (err)
-		return err;
-
-	ctx->key.rounds = 6 + key_len / 4;
-
-	kernel_neon_begin();
-	aesbs_convert_key(ctx->key.rk, ctx->fallback.key_enc, ctx->key.rounds);
-	kernel_neon_end();
-
-	return 0;
-}
-
 static int ctr_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -254,21 +228,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	__aes_arm_encrypt(ctx->fallback.key_enc, ctx->key.rounds, src, dst);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
@@ -374,13 +333,12 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-neonbs",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -389,13 +347,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-neonbs",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -405,13 +362,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-neonbs",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -422,29 +378,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-neonbs-sync",
-	.base.cra_priority	= 250 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct aesbs_ctr_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.walksize		= 8 * AES_BLOCK_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.setkey			= aesbs_ctr_setkey_sync,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-neonbs",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= 2 * AES_MIN_KEY_SIZE,
 	.max_keysize		= 2 * AES_MAX_KEY_SIZE,
@@ -455,55 +394,18 @@ static struct skcipher_alg aes_algs[] = { {
 	.decrypt		= xts_decrypt,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs); i++)
-		if (aes_simd_algs[i])
-			simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
 	if (!(elf_hwcap & HWCAP_NEON))
 		return -ENODEV;
 
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
-late_initcall(aes_init);
+module_init(aes_init);
 module_exit(aes_exit);
diff --git linux-libre-6.15-gnu/arch/arm/crypto/blake2b-neon-glue.c linux-libre-6.16-gnu/arch/arm/crypto/blake2b-neon-glue.c
index 4b59d027ba4a..2ff443a91724 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/blake2b-neon-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/blake2b-neon-glue.c
@@ -7,7 +7,6 @@
 
 #include <crypto/internal/blake2b.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 
 #include <linux/module.h>
 #include <linux/sizes.h>
@@ -21,11 +20,6 @@ asmlinkage void blake2b_compress_neon(struct blake2b_state *state,
 static void blake2b_compress_arch(struct blake2b_state *state,
 				  const u8 *block, size_t nblocks, u32 inc)
 {
-	if (!crypto_simd_usable()) {
-		blake2b_compress_generic(state, block, nblocks, inc);
-		return;
-	}
-
 	do {
 		const size_t blocks = min_t(size_t, nblocks,
 					    SZ_4K / BLAKE2B_BLOCK_SIZE);
@@ -42,12 +36,14 @@ static void blake2b_compress_arch(struct blake2b_state *state,
 static int crypto_blake2b_update_neon(struct shash_desc *desc,
 				      const u8 *in, unsigned int inlen)
 {
-	return crypto_blake2b_update(desc, in, inlen, blake2b_compress_arch);
+	return crypto_blake2b_update_bo(desc, in, inlen, blake2b_compress_arch);
 }
 
-static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
+static int crypto_blake2b_finup_neon(struct shash_desc *desc, const u8 *in,
+				     unsigned int inlen, u8 *out)
 {
-	return crypto_blake2b_final(desc, out, blake2b_compress_arch);
+	return crypto_blake2b_finup(desc, in, inlen, out,
+				    blake2b_compress_arch);
 }
 
 #define BLAKE2B_ALG(name, driver_name, digest_size)			\
@@ -55,7 +51,9 @@ static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
 		.base.cra_name		= name,				\
 		.base.cra_driver_name	= driver_name,			\
 		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
+		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY |	\
+					  CRYPTO_AHASH_ALG_BLOCK_ONLY |	\
+					  CRYPTO_AHASH_ALG_FINAL_NONZERO, \
 		.base.cra_blocksize	= BLAKE2B_BLOCK_SIZE,		\
 		.base.cra_ctxsize	= sizeof(struct blake2b_tfm_ctx), \
 		.base.cra_module	= THIS_MODULE,			\
@@ -63,8 +61,9 @@ static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
 		.setkey			= crypto_blake2b_setkey,	\
 		.init			= crypto_blake2b_init,		\
 		.update			= crypto_blake2b_update_neon,	\
-		.final			= crypto_blake2b_final_neon,	\
+		.finup			= crypto_blake2b_finup_neon,	\
 		.descsize		= sizeof(struct blake2b_state),	\
+		.statesize		= BLAKE2B_STATE_SIZE,		\
 	}
 
 static struct shash_alg blake2b_neon_algs[] = {
diff --git linux-libre-6.15-gnu/arch/arm/crypto/chacha-glue.c linux-libre-6.16-gnu/arch/arm/crypto/chacha-glue.c
deleted file mode 100644
index 50e635512046..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/chacha-glue.c
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- * Copyright (C) 2015 Martin Willi
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cputype.h>
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				      int nrounds);
-asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				       int nrounds, unsigned int nbytes);
-asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
-asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-
-asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
-			     const u32 *state, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon);
-
-static inline bool neon_usable(void)
-{
-	return static_branch_likely(&use_neon) && crypto_simd_usable();
-}
-
-static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-			  unsigned int bytes, int nrounds)
-{
-	u8 buf[CHACHA_BLOCK_SIZE];
-
-	while (bytes > CHACHA_BLOCK_SIZE) {
-		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
-
-		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
-	}
-	if (bytes) {
-		const u8 *s = src;
-		u8 *d = dst;
-
-		if (bytes != CHACHA_BLOCK_SIZE)
-			s = d = memcpy(buf, src, bytes);
-		chacha_block_xor_neon(state, d, s, nrounds);
-		if (d != dst)
-			memcpy(dst, buf, bytes);
-		state[12]++;
-	}
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) {
-		hchacha_block_arm(state, stream, nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, stream, nrounds);
-		kernel_neon_end();
-	}
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() ||
-	    bytes <= CHACHA_BLOCK_SIZE) {
-		chacha_doarm(dst, src, bytes, state, nrounds);
-		state[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE);
-		return;
-	}
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		kernel_neon_begin();
-		chacha_doneon(state, dst, src, todo, nrounds);
-		kernel_neon_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_stream_xor(struct skcipher_request *req,
-			     const struct chacha_ctx *ctx, const u8 *iv,
-			     bool neon)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = round_down(nbytes, walk.stride);
-
-		if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-			chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr,
-				     nbytes, state, ctx->nrounds);
-			state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE);
-		} else {
-			kernel_neon_begin();
-			chacha_doneon(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			kernel_neon_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int do_chacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_stream_xor(req, ctx, req->iv, neon);
-}
-
-static int chacha_arm(struct skcipher_request *req)
-{
-	return do_chacha(req, false);
-}
-
-static int chacha_neon(struct skcipher_request *req)
-{
-	return do_chacha(req, neon_usable());
-}
-
-static int do_xchacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init(state, ctx->key, req->iv);
-
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-		hchacha_block_arm(state, subctx.key, ctx->nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, subctx.key, ctx->nrounds);
-		kernel_neon_end();
-	}
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_stream_xor(req, &subctx, real_iv, neon);
-}
-
-static int xchacha_arm(struct skcipher_request *req)
-{
-	return do_xchacha(req, false);
-}
-
-static int xchacha_neon(struct skcipher_request *req)
-{
-	return do_xchacha(req, neon_usable());
-}
-
-static struct skcipher_alg arm_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_arm,
-		.decrypt		= chacha_arm,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	},
-};
-
-static struct skcipher_alg neon_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_neon,
-		.decrypt		= chacha_neon,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	int err = 0;
-
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (err)
-			return err;
-	}
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
-		int i;
-
-		switch (read_cpuid_part()) {
-		case ARM_CPU_PART_CORTEX_A7:
-		case ARM_CPU_PART_CORTEX_A5:
-			/*
-			 * The Cortex-A7 and Cortex-A5 do not perform well with
-			 * the NEON implementation but do incredibly with the
-			 * scalar one and use less power.
-			 */
-			for (i = 0; i < ARRAY_SIZE(neon_algs); i++)
-				neon_algs[i].base.cra_priority = 0;
-			break;
-		default:
-			static_branch_enable(&use_neon);
-		}
-
-		if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-			err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-			if (err)
-				crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		}
-	}
-	return err;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
-			crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-	}
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (scalar and NEON accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-arm");
-#ifdef CONFIG_KERNEL_MODE_NEON
-MODULE_ALIAS_CRYPTO("chacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha12-neon");
-#endif
diff --git linux-libre-6.15-gnu/arch/arm/crypto/ghash-ce-glue.c linux-libre-6.16-gnu/arch/arm/crypto/ghash-ce-glue.c
index aabfcf522a2c..a52dcc8c1e33 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/ghash-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/ghash-ce-glue.c
@@ -8,22 +8,22 @@
 
 #include <asm/hwcap.h>
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/gcm.h>
 #include <crypto/b128ops.h>
-#include <crypto/cryptd.h>
+#include <crypto/gcm.h>
+#include <crypto/gf128mul.h>
+#include <crypto/ghash.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
-#include <crypto/gf128mul.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/errno.h>
 #include <linux/jump_label.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
 
 MODULE_DESCRIPTION("GHASH hash function using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ardb@kernel.org>");
@@ -32,9 +32,6 @@ MODULE_ALIAS_CRYPTO("ghash");
 MODULE_ALIAS_CRYPTO("gcm(aes)");
 MODULE_ALIAS_CRYPTO("rfc4106(gcm(aes))");
 
-#define GHASH_BLOCK_SIZE	16
-#define GHASH_DIGEST_SIZE	16
-
 #define RFC4106_NONCE_SIZE	4
 
 struct ghash_key {
@@ -49,10 +46,8 @@ struct gcm_key {
 	u8	nonce[];	// for RFC4106 nonce
 };
 
-struct ghash_desc_ctx {
+struct arm_ghash_desc_ctx {
 	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
-	u8 buf[GHASH_BLOCK_SIZE];
-	u32 count;
 };
 
 asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
@@ -65,9 +60,9 @@ static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_p64);
 
 static int ghash_init(struct shash_desc *desc)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	*ctx = (struct ghash_desc_ctx){};
+	*ctx = (struct arm_ghash_desc_ctx){};
 	return 0;
 }
 
@@ -85,52 +80,49 @@ static void ghash_do_update(int blocks, u64 dg[], const char *src,
 static int ghash_update(struct shash_desc *desc, const u8 *src,
 			unsigned int len)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	ctx->count += len;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	int blocks;
 
-	if ((partial + len) >= GHASH_BLOCK_SIZE) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-		int blocks;
+	blocks = len / GHASH_BLOCK_SIZE;
+	ghash_do_update(blocks, ctx->digest, src, key, NULL);
+	return len - blocks * GHASH_BLOCK_SIZE;
+}
 
-		if (partial) {
-			int p = GHASH_BLOCK_SIZE - partial;
+static int ghash_export(struct shash_desc *desc, void *out)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *dst = out;
 
-			memcpy(ctx->buf + partial, src, p);
-			src += p;
-			len -= p;
-		}
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+	return 0;
+}
 
-		blocks = len / GHASH_BLOCK_SIZE;
-		len %= GHASH_BLOCK_SIZE;
+static int ghash_import(struct shash_desc *desc, const void *in)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *src = in;
 
-		ghash_do_update(blocks, ctx->digest, src, key,
-				partial ? ctx->buf : NULL);
-		src += blocks * GHASH_BLOCK_SIZE;
-		partial = 0;
-	}
-	if (len)
-		memcpy(ctx->buf + partial, src, len);
+	ctx->digest[1] = get_unaligned_be64(src);
+	ctx->digest[0] = get_unaligned_be64(src + 8);
 	return 0;
 }
 
-static int ghash_final(struct shash_desc *desc, u8 *dst)
+static int ghash_finup(struct shash_desc *desc, const u8 *src,
+		       unsigned int len, u8 *dst)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
-		ghash_do_update(1, ctx->digest, ctx->buf, key, NULL);
+		memcpy(buf, src, len);
+		ghash_do_update(1, ctx->digest, buf, key, NULL);
+		memzero_explicit(buf, sizeof(buf));
 	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	*ctx = (struct ghash_desc_ctx){};
-	return 0;
+	return ghash_export(desc, dst);
 }
 
 static void ghash_reflect(u64 h[], const be128 *k)
@@ -175,13 +167,17 @@ static struct shash_alg ghash_alg = {
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
 	.update			= ghash_update,
-	.final			= ghash_final,
+	.finup			= ghash_finup,
 	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
+	.export			= ghash_export,
+	.import			= ghash_import,
+	.descsize		= sizeof(struct arm_ghash_desc_ctx),
+	.statesize		= sizeof(struct ghash_desc_ctx),
 
 	.base.cra_name		= "ghash",
 	.base.cra_driver_name	= "ghash-ce",
 	.base.cra_priority	= 300,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
@@ -317,9 +313,6 @@ static int gcm_encrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 	u8 *tag, *dst;
 	int tail, err;
 
-	if (WARN_ON_ONCE(!may_use_simd()))
-		return -EBUSY;
-
 	err = skcipher_walk_aead_encrypt(&walk, req, false);
 
 	kernel_neon_begin();
@@ -409,9 +402,6 @@ static int gcm_decrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 	u8 *tag, *dst;
 	int tail, err, ret;
 
-	if (WARN_ON_ONCE(!may_use_simd()))
-		return -EBUSY;
-
 	scatterwalk_map_and_copy(otag, req->src,
 				 req->assoclen + req->cryptlen - authsize,
 				 authsize, 0);
diff --git linux-libre-6.15-gnu/arch/arm/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/arm/crypto/poly1305-glue.c
deleted file mode 100644
index 4464ffbf8fd1..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/jump_label.h>
-#include <linux/module.h>
-
-void poly1305_init_arm(void *state, const u8 *key);
-void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_emit_arm(void *state, u8 *digest, const u32 *nonce);
-
-void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
-{
-}
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_arm(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int arm_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void arm_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit, bool do_neon)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_arm(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	if (static_branch_likely(&have_neon) && likely(do_neon))
-		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-	else
-		poly1305_blocks_arm(&dctx->h, src, len, hibit);
-}
-
-static void arm_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-				    const u8 *src, u32 len, bool do_neon)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			arm_poly1305_blocks(dctx, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1, false);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		arm_poly1305_blocks(dctx, src, len, 1, do_neon);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-}
-
-static int arm_poly1305_update(struct shash_desc *desc,
-			       const u8 *src, unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	arm_poly1305_do_update(dctx, src, srclen, false);
-	return 0;
-}
-
-static int __maybe_unused arm_poly1305_update_neon(struct shash_desc *desc,
-						   const u8 *src,
-						   unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-	bool do_neon = crypto_simd_usable() && srclen > 128;
-
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_begin();
-	arm_poly1305_do_update(dctx, src, srclen, do_neon);
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_end();
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	bool do_neon = IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-		       crypto_simd_usable();
-
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks_arm(&dctx->h, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		if (static_branch_likely(&have_neon) && do_neon) {
-			do {
-				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-
-				kernel_neon_begin();
-				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-				kernel_neon_end();
-
-				len -= todo;
-				src += todo;
-			} while (len);
-		} else {
-			poly1305_blocks_arm(&dctx->h, src, len, 1);
-			src += len;
-		}
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit_arm(&dctx->h, dst, dctx->s);
-	*dctx = (struct poly1305_desc_ctx){};
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int arm_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg arm_poly1305_algs[] = {{
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-arm",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#ifdef CONFIG_KERNEL_MODE_NEON
-}, {
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update_neon,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-neon",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#endif
-}};
-
-static int __init arm_poly1305_mod_init(void)
-{
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-	    (elf_hwcap & HWCAP_NEON))
-		static_branch_enable(&have_neon);
-	else if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		/* register only the first entry */
-		return crypto_register_shash(&arm_poly1305_algs[0]);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(arm_poly1305_algs,
-					ARRAY_SIZE(arm_poly1305_algs)) : 0;
-}
-
-static void __exit arm_poly1305_mod_exit(void)
-{
-	if (!IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		return;
-	if (!static_branch_likely(&have_neon)) {
-		crypto_unregister_shash(&arm_poly1305_algs[0]);
-		return;
-	}
-	crypto_unregister_shashes(arm_poly1305_algs,
-				  ARRAY_SIZE(arm_poly1305_algs));
-}
-
-module_init(arm_poly1305_mod_init);
-module_exit(arm_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Accelerated Poly1305 transform for ARM");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-arm");
-MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha1-ce-glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha1-ce-glue.c
index de9100c67b37..fac07a4799de 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha1-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha1-ce-glue.c
@@ -5,20 +5,14 @@
  * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
+#include <asm/neon.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
-
 MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
@@ -29,50 +23,36 @@ asmlinkage void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
 static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
 			  unsigned int len)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
+	int remain;
 
 	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
+	remain = sha1_base_do_update_blocks(desc, data, len, sha1_ce_transform);
 	kernel_neon_end();
 
-	return 0;
+	return remain;
 }
 
 static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
 			 unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
 	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	sha1_base_do_finalize(desc, sha1_ce_transform);
+	sha1_base_do_finup(desc, data, len, sha1_ce_transform);
 	kernel_neon_end();
 
 	return sha1_base_finish(desc, out);
 }
 
-static int sha1_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_ce_finup(desc, NULL, 0, out);
-}
-
 static struct shash_alg alg = {
 	.init			= sha1_base_init,
 	.update			= sha1_ce_update,
-	.final			= sha1_ce_final,
 	.finup			= sha1_ce_finup,
-	.descsize		= sizeof(struct sha1_state),
+	.descsize		= SHA1_STATE_SIZE,
 	.digestsize		= SHA1_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha1",
 		.cra_driver_name	= "sha1-ce",
 		.cra_priority		= 200,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize		= SHA1_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha1.h linux-libre-6.16-gnu/arch/arm/crypto/sha1.h
deleted file mode 100644
index b1b7e21da2c3..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/sha1.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_ARM_CRYPTO_SHA1_H
-#define ASM_ARM_CRYPTO_SHA1_H
-
-#include <linux/crypto.h>
-#include <crypto/sha1.h>
-
-extern int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len);
-
-extern int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out);
-
-#endif
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha1_glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha1_glue.c
index 95a727bcd664..255da00c7d98 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha1_glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha1_glue.c
@@ -12,53 +12,42 @@
  */
 
 #include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
-#include <asm/byteorder.h>
-
-#include "sha1.h"
+#include <linux/kernel.h>
+#include <linux/module.h>
 
 asmlinkage void sha1_block_data_order(struct sha1_state *digest,
 		const u8 *data, int rounds);
 
-int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-		    unsigned int len)
+static int sha1_update_arm(struct shash_desc *desc, const u8 *data,
+			   unsigned int len)
 {
 	/* make sure signature matches sha1_block_fn() */
 	BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0);
 
-	return sha1_base_do_update(desc, data, len, sha1_block_data_order);
+	return sha1_base_do_update_blocks(desc, data, len,
+					  sha1_block_data_order);
 }
-EXPORT_SYMBOL_GPL(sha1_update_arm);
 
-static int sha1_final(struct shash_desc *desc, u8 *out)
+static int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
+			  unsigned int len, u8 *out)
 {
-	sha1_base_do_finalize(desc, sha1_block_data_order);
+	sha1_base_do_finup(desc, data, len, sha1_block_data_order);
 	return sha1_base_finish(desc, out);
 }
 
-int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-		   unsigned int len, u8 *out)
-{
-	sha1_base_do_update(desc, data, len, sha1_block_data_order);
-	return sha1_final(desc, out);
-}
-EXPORT_SYMBOL_GPL(sha1_finup_arm);
-
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_base_init,
 	.update		=	sha1_update_arm,
-	.final		=	sha1_final,
 	.finup		=	sha1_finup_arm,
-	.descsize	=	sizeof(struct sha1_state),
+	.descsize	=	SHA1_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"sha1-asm",
 		.cra_priority	=	150,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	SHA1_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha1_neon_glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha1_neon_glue.c
index 9c70b87e69f7..d321850f22a6 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha1_neon_glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha1_neon_glue.c
@@ -13,18 +13,12 @@
  *  Copyright (c) Chandramouli Narayanan <mouli@linux.intel.com>
  */
 
+#include <asm/neon.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
+#include <linux/kernel.h>
+#include <linux/module.h>
 
 asmlinkage void sha1_transform_neon(struct sha1_state *state_h,
 				    const u8 *data, int rounds);
@@ -32,50 +26,37 @@ asmlinkage void sha1_transform_neon(struct sha1_state *state_h,
 static int sha1_neon_update(struct shash_desc *desc, const u8 *data,
 			  unsigned int len)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
+	int remain;
 
 	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len, sha1_transform_neon);
+	remain = sha1_base_do_update_blocks(desc, data, len,
+					    sha1_transform_neon);
 	kernel_neon_end();
 
-	return 0;
+	return remain;
 }
 
 static int sha1_neon_finup(struct shash_desc *desc, const u8 *data,
 			   unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
 	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len, sha1_transform_neon);
-	sha1_base_do_finalize(desc, sha1_transform_neon);
+	sha1_base_do_finup(desc, data, len, sha1_transform_neon);
 	kernel_neon_end();
 
 	return sha1_base_finish(desc, out);
 }
 
-static int sha1_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_neon_finup(desc, NULL, 0, out);
-}
-
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_base_init,
 	.update		=	sha1_neon_update,
-	.final		=	sha1_neon_final,
 	.finup		=	sha1_neon_finup,
-	.descsize	=	sizeof(struct sha1_state),
+	.descsize		= SHA1_STATE_SIZE,
 	.base		=	{
 		.cra_name		= "sha1",
 		.cra_driver_name	= "sha1-neon",
 		.cra_priority		= 250,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize		= SHA1_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha2-ce-glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha2-ce-glue.c
deleted file mode 100644
index aeac45bfbf9f..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/sha2-ce-glue.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-#include <linux/unaligned.h>
-
-#include "sha256_glue.h"
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-asmlinkage void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
-
-static int sha2_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha2_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-				      (sha256_block_fn *)sha2_ce_transform);
-	sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int sha2_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha2_ce_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha224_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha224",
-		.cra_driver_name	= "sha224-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-}, {
-	.init			= sha256_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha256",
-		.cra_driver_name	= "sha256-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha2_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha2_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA2, sha2_ce_mod_init);
-module_exit(sha2_ce_mod_fini);
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha256_glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha256_glue.c
deleted file mode 100644
index f85933fdec75..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/sha256_glue.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using optimized ARM assembler and NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha256_ssse3_glue.c:
- *   Copyright (C) 2013 Intel Corporation
- *   Author: Tim Chen <tim.c.chen@linux.intel.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order(struct sha256_state *state,
-					const u8 *data, int num_blks);
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len)
-{
-	/* make sure casting to sha256_block_fn() is safe */
-	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
-
-	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_update);
-
-static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
-{
-	sha256_base_do_finalize(desc, sha256_block_data_order);
-	return sha256_base_finish(desc, out);
-}
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *out)
-{
-	sha256_base_do_update(desc, data, len, sha256_block_data_order);
-	return crypto_sha256_arm_final(desc, out);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_finup);
-
-static struct shash_alg algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init sha256_mod_init(void)
-{
-	int res = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-
-	if (res < 0)
-		return res;
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) {
-		res = crypto_register_shashes(sha256_neon_algs,
-					      ARRAY_SIZE(sha256_neon_algs));
-
-		if (res < 0)
-			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-	}
-
-	return res;
-}
-
-static void __exit sha256_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon())
-		crypto_unregister_shashes(sha256_neon_algs,
-					  ARRAY_SIZE(sha256_neon_algs));
-}
-
-module_init(sha256_mod_init);
-module_exit(sha256_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm (ARM), including NEON");
-
-MODULE_ALIAS_CRYPTO("sha256");
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha256_glue.h linux-libre-6.16-gnu/arch/arm/crypto/sha256_glue.h
deleted file mode 100644
index 9f0d578bab5f..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/sha256_glue.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _CRYPTO_SHA256_GLUE_H
-#define _CRYPTO_SHA256_GLUE_H
-
-#include <linux/crypto.h>
-
-extern struct shash_alg sha256_neon_algs[2];
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len);
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *hash);
-
-#endif /* _CRYPTO_SHA256_GLUE_H */
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha256_neon_glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha256_neon_glue.c
deleted file mode 100644
index ccdcfff71910..000000000000
--- linux-libre-6.15-gnu/arch/arm/crypto/sha256_neon_glue.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha512_neon_glue.c:
- *   Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/byteorder.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order_neon(struct sha256_state *digest,
-					     const u8 *data, int num_blks);
-
-static int crypto_sha256_neon_update(struct shash_desc *desc, const u8 *data,
-				     unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len, sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int crypto_sha256_neon_finup(struct shash_desc *desc, const u8 *data,
-				    unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-				      sha256_block_data_order_neon);
-	sha256_base_do_finalize(desc, sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int crypto_sha256_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return crypto_sha256_neon_finup(desc, NULL, 0, out);
-}
-
-struct shash_alg sha256_neon_algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha512-glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha512-glue.c
index 1be5bd498af3..f8a6480889b1 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha512-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha512-glue.c
@@ -5,15 +5,14 @@
  * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
+#include <asm/hwcap.h>
+#include <asm/neon.h>
 #include <crypto/internal/hash.h>
 #include <crypto/sha2.h>
 #include <crypto/sha512_base.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-
 #include "sha512.h"
 
 MODULE_DESCRIPTION("Accelerated SHA-384/SHA-512 secure hash for ARM");
@@ -28,50 +27,47 @@ MODULE_ALIAS_CRYPTO("sha512-arm");
 asmlinkage void sha512_block_data_order(struct sha512_state *state,
 					u8 const *src, int blocks);
 
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len)
+static int sha512_arm_update(struct shash_desc *desc, const u8 *data,
+			     unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
+	return sha512_base_do_update_blocks(desc, data, len,
+					    sha512_block_data_order);
 }
 
-static int sha512_arm_final(struct shash_desc *desc, u8 *out)
+static int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
+			    unsigned int len, u8 *out)
 {
-	sha512_base_do_finalize(desc, sha512_block_data_order);
+	sha512_base_do_finup(desc, data, len, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out)
-{
-	sha512_base_do_update(desc, data, len, sha512_block_data_order);
-	return sha512_arm_final(desc, out);
-}
-
 static struct shash_alg sha512_arm_algs[] = { {
 	.init			= sha384_base_init,
 	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
 	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA384_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha384",
 		.cra_driver_name	= "sha384-arm",
 		.cra_priority		= 250,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					  CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize		= SHA512_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
 },  {
 	.init			= sha512_base_init,
 	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
 	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA512_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha512",
 		.cra_driver_name	= "sha512-arm",
 		.cra_priority		= 250,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					  CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize		= SHA512_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha512-neon-glue.c linux-libre-6.16-gnu/arch/arm/crypto/sha512-neon-glue.c
index c6e58fe475ac..bd528077fefb 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha512-neon-glue.c
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha512-neon-glue.c
@@ -5,16 +5,13 @@
  * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
+#include <asm/neon.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sha2.h>
 #include <crypto/sha512_base.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/simd.h>
-#include <asm/neon.h>
-
 #include "sha512.h"
 
 MODULE_ALIAS_CRYPTO("sha384-neon");
@@ -26,51 +23,36 @@ asmlinkage void sha512_block_data_order_neon(struct sha512_state *state,
 static int sha512_neon_update(struct shash_desc *desc, const u8 *data,
 			      unsigned int len)
 {
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE)
-		return sha512_arm_update(desc, data, len);
+	int remain;
 
 	kernel_neon_begin();
-	sha512_base_do_update(desc, data, len, sha512_block_data_order_neon);
+	remain = sha512_base_do_update_blocks(desc, data, len,
+					      sha512_block_data_order_neon);
 	kernel_neon_end();
-
-	return 0;
+	return remain;
 }
 
 static int sha512_neon_finup(struct shash_desc *desc, const u8 *data,
 			     unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable())
-		return sha512_arm_finup(desc, data, len, out);
-
 	kernel_neon_begin();
-	if (len)
-		sha512_base_do_update(desc, data, len,
-				      sha512_block_data_order_neon);
-	sha512_base_do_finalize(desc, sha512_block_data_order_neon);
+	sha512_base_do_finup(desc, data, len, sha512_block_data_order_neon);
 	kernel_neon_end();
-
 	return sha512_base_finish(desc, out);
 }
 
-static int sha512_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha512_neon_finup(desc, NULL, 0, out);
-}
-
 struct shash_alg sha512_neon_algs[] = { {
 	.init			= sha384_base_init,
 	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
 	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA384_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha384",
 		.cra_driver_name	= "sha384-neon",
 		.cra_priority		= 300,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					  CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize		= SHA384_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 
@@ -78,14 +60,15 @@ struct shash_alg sha512_neon_algs[] = { {
 },  {
 	.init			= sha512_base_init,
 	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
 	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA512_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha512",
 		.cra_driver_name	= "sha512-neon",
 		.cra_priority		= 300,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					  CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize		= SHA512_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha512.h linux-libre-6.16-gnu/arch/arm/crypto/sha512.h
index e14572be76d1..eeaee52cda69 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha512.h
+++ linux-libre-6.16-gnu/arch/arm/crypto/sha512.h
@@ -1,9 +1,3 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len);
-
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out);
-
 extern struct shash_alg sha512_neon_algs[2];
diff --git linux-libre-6.15-gnu/arch/arm/include/asm/pgtable-3level.h linux-libre-6.16-gnu/arch/arm/include/asm/pgtable-3level.h
index fa5939eb9864..7b71a3d414b7 100644
--- linux-libre-6.15-gnu/arch/arm/include/asm/pgtable-3level.h
+++ linux-libre-6.16-gnu/arch/arm/include/asm/pgtable-3level.h
@@ -209,7 +209,6 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_pfn(pmd)		(((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 /* No hardware dirty/accessed bits -- generic_pmdp_establish() fits */
 #define pmdp_establish generic_pmdp_establish
diff --git linux-libre-6.15-gnu/arch/arm/include/asm/pgtable.h linux-libre-6.16-gnu/arch/arm/include/asm/pgtable.h
index 6b986ef6042f..86378eec7757 100644
--- linux-libre-6.15-gnu/arch/arm/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/arm/include/asm/pgtable.h
@@ -168,7 +168,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pfn_pte(pfn,prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
@@ -302,7 +301,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	__pte((swp).val)
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_isset(pte, L_PTE_SWP_EXCLUSIVE);
 }
diff --git linux-libre-6.15-gnu/arch/arm/include/asm/simd.h linux-libre-6.16-gnu/arch/arm/include/asm/simd.h
index 82191dbd7e78..be08a8da046f 100644
--- linux-libre-6.15-gnu/arch/arm/include/asm/simd.h
+++ linux-libre-6.16-gnu/arch/arm/include/asm/simd.h
@@ -1,8 +1,15 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SIMD_H
+#define _ASM_SIMD_H
 
-#include <linux/hardirq.h>
+#include <linux/compiler_attributes.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
 
 static __must_check inline bool may_use_simd(void)
 {
-	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq();
+	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq()
+	       && !irqs_disabled();
 }
+
+#endif	/* _ASM_SIMD_H */
diff --git linux-libre-6.15-gnu/arch/arm/include/asm/syscall.h linux-libre-6.16-gnu/arch/arm/include/asm/syscall.h
index fe4326d938c1..18b102a30741 100644
--- linux-libre-6.15-gnu/arch/arm/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/arm/include/asm/syscall.h
@@ -68,6 +68,30 @@ static inline void syscall_set_return_value(struct task_struct *task,
 	regs->ARM_r0 = (long) error ? error : val;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	if (nr == -1) {
+		task_thread_info(task)->abi_syscall = -1;
+		/*
+		 * When the syscall number is set to -1, the syscall will be
+		 * skipped.  In this case the syscall return value has to be
+		 * set explicitly, otherwise the first syscall argument is
+		 * returned as the syscall return value.
+		 */
+		syscall_set_return_value(task, regs, -ENOSYS, 0);
+		return;
+	}
+	if ((IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))) {
+		task_thread_info(task)->abi_syscall = nr;
+		return;
+	}
+	task_thread_info(task)->abi_syscall =
+		(task_thread_info(task)->abi_syscall & ~__NR_SYSCALL_MASK) |
+		(nr & __NR_SYSCALL_MASK);
+}
+
 #define SYSCALL_MAX_ARGS 7
 
 static inline void syscall_get_arguments(struct task_struct *task,
@@ -80,6 +104,19 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->ARM_r0 + 1, 5 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->ARM_r0, args, 6 * sizeof(args[0]));
+	/*
+	 * Also copy the first argument into ARM_ORIG_r0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->ARM_ORIG_r0 = regs->ARM_r0;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	/* ARM tasks don't change audit architectures on the fly. */
diff --git linux-libre-6.15-gnu/arch/arm/kernel/Makefile linux-libre-6.16-gnu/arch/arm/kernel/Makefile
index b3333d070390..afc9de7ef9a1 100644
--- linux-libre-6.15-gnu/arch/arm/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/arm/kernel/Makefile
@@ -104,4 +104,4 @@ obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
 obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git linux-libre-6.15-gnu/arch/arm/lib/Makefile linux-libre-6.16-gnu/arch/arm/lib/Makefile
index 007874320937..91ea0e29107a 100644
--- linux-libre-6.15-gnu/arch/arm/lib/Makefile
+++ linux-libre-6.16-gnu/arch/arm/lib/Makefile
@@ -5,6 +5,8 @@
 # Copyright (C) 1995-2000 Russell King
 #
 
+obj-y += crypto/
+
 lib-y		:= changebit.o csumipv6.o csumpartial.o               \
 		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
 		   delay.o delay-loop.o findbit.o memchr.o memcpy.o   \
@@ -47,7 +49,7 @@ endif
 obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
 
 obj-$(CONFIG_CRC32_ARCH) += crc32-arm.o
-crc32-arm-y := crc32-glue.o crc32-core.o
+crc32-arm-y := crc32.o crc32-core.o
 
 obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-arm.o
-crc-t10dif-arm-y := crc-t10dif-glue.o crc-t10dif-core.o
+crc-t10dif-arm-y := crc-t10dif.o crc-t10dif-core.o
diff --git linux-libre-6.15-gnu/arch/arm/lib/crc-t10dif-glue.c linux-libre-6.16-gnu/arch/arm/lib/crc-t10dif.c
similarity index 91%
rename from arch/arm/lib/crc-t10dif-glue.c
rename to arch/arm/lib/crc-t10dif.c
index 6efad3d78284..1093f8ec13b0 100644
--- linux-libre-6.15-gnu/arch/arm/lib/crc-t10dif-glue.c
+++ linux-libre-6.16-gnu/arch/arm/lib/crc-t10dif.c
@@ -16,8 +16,8 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 
-static DEFINE_STATIC_KEY_FALSE(have_neon);
-static DEFINE_STATIC_KEY_FALSE(have_pmull);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_pmull);
 
 #define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
 
@@ -60,7 +60,7 @@ static int __init crc_t10dif_arm_init(void)
 	}
 	return 0;
 }
-arch_initcall(crc_t10dif_arm_init);
+subsys_initcall(crc_t10dif_arm_init);
 
 static void __exit crc_t10dif_arm_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/arm/lib/crc32-glue.c linux-libre-6.16-gnu/arch/arm/lib/crc32.c
similarity index 95%
rename from arch/arm/lib/crc32-glue.c
rename to arch/arm/lib/crc32.c
index 4340351dbde8..f2bef8849c7c 100644
--- linux-libre-6.15-gnu/arch/arm/lib/crc32-glue.c
+++ linux-libre-6.16-gnu/arch/arm/lib/crc32.c
@@ -18,8 +18,8 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 
-static DEFINE_STATIC_KEY_FALSE(have_crc32);
-static DEFINE_STATIC_KEY_FALSE(have_pmull);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_crc32);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_pmull);
 
 #define PMULL_MIN_LEN	64	/* min size of buffer for pmull functions */
 
@@ -103,7 +103,7 @@ static int __init crc32_arm_init(void)
 		static_branch_enable(&have_pmull);
 	return 0;
 }
-arch_initcall(crc32_arm_init);
+subsys_initcall(crc32_arm_init);
 
 static void __exit crc32_arm_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/.gitignore linux-libre-6.16-gnu/arch/arm/lib/crypto/.gitignore
new file mode 100644
index 000000000000..12d74d8b03d0
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+poly1305-core.S
+sha256-core.S
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/Kconfig linux-libre-6.16-gnu/arch/arm/lib/crypto/Kconfig
new file mode 100644
index 000000000000..d1ad664f0c67
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CRYPTO_BLAKE2S_ARM
+	bool "Hash functions: BLAKE2s"
+	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
+	help
+	  BLAKE2s cryptographic hash function (RFC 7693)
+
+	  Architecture: arm
+
+	  This is faster than the generic implementations of BLAKE2s and
+	  BLAKE2b, but slower than the NEON implementation of BLAKE2b.
+	  There is no NEON implementation of BLAKE2s, since NEON doesn't
+	  really help with it.
+
+config CRYPTO_CHACHA20_NEON
+	tristate
+	default CRYPTO_LIB_CHACHA
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+
+config CRYPTO_POLY1305_ARM
+	tristate
+	default CRYPTO_LIB_POLY1305
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+
+config CRYPTO_SHA256_ARM
+	tristate
+	depends on !CPU_V7M
+	default CRYPTO_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/Makefile linux-libre-6.16-gnu/arch/arm/lib/crypto/Makefile
new file mode 100644
index 000000000000..431f77c3ff6f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
+libblake2s-arm-y := blake2s-core.o blake2s-glue.o
+
+obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
+chacha-neon-y := chacha-scalar-core.o chacha-glue.o
+chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
+
+obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
+poly1305-arm-y := poly1305-core.o poly1305-glue.o
+
+obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
+sha256-arm-y := sha256.o sha256-core.o
+sha256-arm-$(CONFIG_KERNEL_MODE_NEON) += sha256-ce.o
+
+quiet_cmd_perl = PERL    $@
+      cmd_perl = $(PERL) $(<) > $(@)
+
+$(obj)/%-core.S: $(src)/%-armv4.pl
+	$(call cmd,perl)
+
+clean-files += poly1305-core.S sha256-core.S
+
+aflags-thumb2-$(CONFIG_THUMB2_KERNEL)  := -U__thumb2__ -D__thumb2__=1
+
+# massage the perlasm code a bit so we only get the NEON routine if we need it
+poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
+poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
+AFLAGS_poly1305-core.o += $(poly1305-aflags-y) $(aflags-thumb2-y)
+
+AFLAGS_sha256-core.o += $(aflags-thumb2-y)
diff --git linux-libre-6.15-gnu/arch/arm/crypto/blake2s-core.S linux-libre-6.16-gnu/arch/arm/lib/crypto/blake2s-core.S
similarity index 100%
rename from arch/arm/crypto/blake2s-core.S
rename to arch/arm/lib/crypto/blake2s-core.S
diff --git linux-libre-6.15-gnu/arch/arm/crypto/blake2s-glue.c linux-libre-6.16-gnu/arch/arm/lib/crypto/blake2s-glue.c
similarity index 100%
rename from arch/arm/crypto/blake2s-glue.c
rename to arch/arm/lib/crypto/blake2s-glue.c
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/chacha-glue.c linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-glue.c
new file mode 100644
index 000000000000..88ec96415283
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-glue.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ChaCha and HChaCha functions (ARM optimized)
+ *
+ * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2015 Martin Willi
+ */
+
+#include <crypto/chacha.h>
+#include <crypto/internal/simd.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/cputype.h>
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+
+asmlinkage void chacha_block_xor_neon(const struct chacha_state *state,
+				      u8 *dst, const u8 *src, int nrounds);
+asmlinkage void chacha_4block_xor_neon(const struct chacha_state *state,
+				       u8 *dst, const u8 *src,
+				       int nrounds, unsigned int nbytes);
+asmlinkage void hchacha_block_arm(const struct chacha_state *state,
+				  u32 out[HCHACHA_OUT_WORDS], int nrounds);
+asmlinkage void hchacha_block_neon(const struct chacha_state *state,
+				   u32 out[HCHACHA_OUT_WORDS], int nrounds);
+
+asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
+			     const struct chacha_state *state, int nrounds);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon);
+
+static inline bool neon_usable(void)
+{
+	return static_branch_likely(&use_neon) && crypto_simd_usable();
+}
+
+static void chacha_doneon(struct chacha_state *state, u8 *dst, const u8 *src,
+			  unsigned int bytes, int nrounds)
+{
+	u8 buf[CHACHA_BLOCK_SIZE];
+
+	while (bytes > CHACHA_BLOCK_SIZE) {
+		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
+
+		chacha_4block_xor_neon(state, dst, src, nrounds, l);
+		bytes -= l;
+		src += l;
+		dst += l;
+		state->x[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
+	}
+	if (bytes) {
+		const u8 *s = src;
+		u8 *d = dst;
+
+		if (bytes != CHACHA_BLOCK_SIZE)
+			s = d = memcpy(buf, src, bytes);
+		chacha_block_xor_neon(state, d, s, nrounds);
+		if (d != dst)
+			memcpy(dst, buf, bytes);
+		state->x[12]++;
+	}
+}
+
+void hchacha_block_arch(const struct chacha_state *state,
+			u32 out[HCHACHA_OUT_WORDS], int nrounds)
+{
+	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) {
+		hchacha_block_arm(state, out, nrounds);
+	} else {
+		kernel_neon_begin();
+		hchacha_block_neon(state, out, nrounds);
+		kernel_neon_end();
+	}
+}
+EXPORT_SYMBOL(hchacha_block_arch);
+
+void chacha_crypt_arch(struct chacha_state *state, u8 *dst, const u8 *src,
+		       unsigned int bytes, int nrounds)
+{
+	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() ||
+	    bytes <= CHACHA_BLOCK_SIZE) {
+		chacha_doarm(dst, src, bytes, state, nrounds);
+		state->x[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE);
+		return;
+	}
+
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_neon_begin();
+		chacha_doneon(state, dst, src, todo, nrounds);
+		kernel_neon_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
+}
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+bool chacha_is_arch_optimized(void)
+{
+	/* We always can use at least the ARM scalar implementation. */
+	return true;
+}
+EXPORT_SYMBOL(chacha_is_arch_optimized);
+
+static int __init chacha_arm_mod_init(void)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
+		switch (read_cpuid_part()) {
+		case ARM_CPU_PART_CORTEX_A7:
+		case ARM_CPU_PART_CORTEX_A5:
+			/*
+			 * The Cortex-A7 and Cortex-A5 do not perform well with
+			 * the NEON implementation but do incredibly with the
+			 * scalar one and use less power.
+			 */
+			break;
+		default:
+			static_branch_enable(&use_neon);
+		}
+	}
+	return 0;
+}
+subsys_initcall(chacha_arm_mod_init);
+
+static void __exit chacha_arm_mod_exit(void)
+{
+}
+module_exit(chacha_arm_mod_exit);
+
+MODULE_DESCRIPTION("ChaCha and HChaCha functions (ARM optimized)");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/arm/crypto/chacha-neon-core.S linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-neon-core.S
similarity index 99%
rename from arch/arm/crypto/chacha-neon-core.S
rename to arch/arm/lib/crypto/chacha-neon-core.S
index 13d12f672656..ddd62b6294a5 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/chacha-neon-core.S
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-neon-core.S
@@ -1,5 +1,5 @@
 /*
- * ChaCha/XChaCha NEON helper functions
+ * ChaCha/HChaCha NEON helper functions
  *
  * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
  *
diff --git linux-libre-6.15-gnu/arch/arm/crypto/chacha-scalar-core.S linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-scalar-core.S
similarity index 98%
rename from arch/arm/crypto/chacha-scalar-core.S
rename to arch/arm/lib/crypto/chacha-scalar-core.S
index 083fe1ab96d0..4951df05c158 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/chacha-scalar-core.S
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/chacha-scalar-core.S
@@ -367,7 +367,7 @@
 
 /*
  * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
- *		     const u32 *state, int nrounds);
+ *		     const struct chacha_state *state, int nrounds);
  */
 ENTRY(chacha_doarm)
 	cmp		r2, #0			// len == 0?
@@ -407,7 +407,8 @@ ENTRY(chacha_doarm)
 ENDPROC(chacha_doarm)
 
 /*
- * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds);
+ * void hchacha_block_arm(const struct chacha_state *state,
+ *			  u32 out[HCHACHA_OUT_WORDS], int nrounds);
  */
 ENTRY(hchacha_block_arm)
 	push		{r1,r4-r11,lr}
diff --git linux-libre-6.15-gnu/arch/arm/crypto/poly1305-armv4.pl linux-libre-6.16-gnu/arch/arm/lib/crypto/poly1305-armv4.pl
similarity index 99%
rename from arch/arm/crypto/poly1305-armv4.pl
rename to arch/arm/lib/crypto/poly1305-armv4.pl
index 6d79498d3115..d57c6e2fc84a 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/poly1305-armv4.pl
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/poly1305-armv4.pl
@@ -43,9 +43,9 @@ $code.=<<___;
 #else
 # define __ARM_ARCH__ __LINUX_ARM_ARCH__
 # define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-# define poly1305_init   poly1305_init_arm
+# define poly1305_init   poly1305_block_init_arch
 # define poly1305_blocks poly1305_blocks_arm
-# define poly1305_emit   poly1305_emit_arm
+# define poly1305_emit   poly1305_emit_arch
 .globl	poly1305_blocks_neon
 #endif
 
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/arm/lib/crypto/poly1305-glue.c
new file mode 100644
index 000000000000..2603b0771f2c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/poly1305-glue.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM
+ *
+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <crypto/internal/poly1305.h>
+#include <linux/cpufeature.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unaligned.h>
+
+asmlinkage void poly1305_block_init_arch(
+	struct poly1305_block_state *state,
+	const u8 raw_key[POLY1305_BLOCK_SIZE]);
+EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
+asmlinkage void poly1305_blocks_arm(struct poly1305_block_state *state,
+				    const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_blocks_neon(struct poly1305_block_state *state,
+				     const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_emit_arch(const struct poly1305_state *state,
+				   u8 digest[POLY1305_DIGEST_SIZE],
+				   const u32 nonce[4]);
+EXPORT_SYMBOL_GPL(poly1305_emit_arch);
+
+void __weak poly1305_blocks_neon(struct poly1305_block_state *state,
+				 const u8 *src, u32 len, u32 hibit)
+{
+}
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+
+void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
+			  unsigned int len, u32 padbit)
+{
+	len = round_down(len, POLY1305_BLOCK_SIZE);
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
+	    static_branch_likely(&have_neon)) {
+		do {
+			unsigned int todo = min_t(unsigned int, len, SZ_4K);
+
+			kernel_neon_begin();
+			poly1305_blocks_neon(state, src, todo, padbit);
+			kernel_neon_end();
+
+			len -= todo;
+			src += todo;
+		} while (len);
+	} else
+		poly1305_blocks_arm(state, src, len, padbit);
+}
+EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
+
+bool poly1305_is_arch_optimized(void)
+{
+	/* We always can use at least the ARM scalar implementation. */
+	return true;
+}
+EXPORT_SYMBOL(poly1305_is_arch_optimized);
+
+static int __init arm_poly1305_mod_init(void)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
+	    (elf_hwcap & HWCAP_NEON))
+		static_branch_enable(&have_neon);
+	return 0;
+}
+subsys_initcall(arm_poly1305_mod_init);
+
+static void __exit arm_poly1305_mod_exit(void)
+{
+}
+module_exit(arm_poly1305_mod_exit);
+
+MODULE_DESCRIPTION("Accelerated Poly1305 transform for ARM");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha256-armv4.pl linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256-armv4.pl
similarity index 97%
rename from arch/arm/crypto/sha256-armv4.pl
rename to arch/arm/lib/crypto/sha256-armv4.pl
index f3a2b54efd4e..8122db7fd599 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha256-armv4.pl
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256-armv4.pl
@@ -204,18 +204,18 @@ K256:
 .word	0				@ terminator
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 .LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha256_block_data_order
+.word	OPENSSL_armcap_P-sha256_blocks_arch
 #endif
 .align	5
 
-.global	sha256_block_data_order
-.type	sha256_block_data_order,%function
-sha256_block_data_order:
-.Lsha256_block_data_order:
+.global	sha256_blocks_arch
+.type	sha256_blocks_arch,%function
+sha256_blocks_arch:
+.Lsha256_blocks_arch:
 #if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha256_block_data_order
+	sub	r3,pc,#8		@ sha256_blocks_arch
 #else
-	adr	r3,.Lsha256_block_data_order
+	adr	r3,.Lsha256_blocks_arch
 #endif
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 	ldr	r12,.LOPENSSL_armcap
@@ -282,7 +282,7 @@ $code.=<<___;
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
 #endif
-.size	sha256_block_data_order,.-sha256_block_data_order
+.size	sha256_blocks_arch,.-sha256_blocks_arch
 ___
 ######################################################################
 # NEON stuff
@@ -470,8 +470,8 @@ sha256_block_data_order_neon:
 	stmdb	sp!,{r4-r12,lr}
 
 	sub	$H,sp,#16*4+16
-	adr	$Ktbl,.Lsha256_block_data_order
-	sub	$Ktbl,$Ktbl,#.Lsha256_block_data_order-K256
+	adr	$Ktbl,.Lsha256_blocks_arch
+	sub	$Ktbl,$Ktbl,#.Lsha256_blocks_arch-K256
 	bic	$H,$H,#15		@ align for 128-bit stores
 	mov	$t2,sp
 	mov	sp,$H			@ alloca
diff --git linux-libre-6.15-gnu/arch/arm/crypto/sha2-ce-core.S linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256-ce.S
similarity index 91%
rename from arch/arm/crypto/sha2-ce-core.S
rename to arch/arm/lib/crypto/sha256-ce.S
index b6369d2440a1..ac2c9b01b22d 100644
--- linux-libre-6.15-gnu/arch/arm/crypto/sha2-ce-core.S
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256-ce.S
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions
+ * sha256-ce.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions
  *
  * Copyright (C) 2015 Linaro Ltd.
  * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
@@ -67,10 +67,10 @@
 	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
 
 	/*
-	 * void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
+	 * void sha256_ce_transform(u32 state[SHA256_STATE_WORDS],
+	 *			    const u8 *data, size_t nblocks);
 	 */
-ENTRY(sha2_ce_transform)
+ENTRY(sha256_ce_transform)
 	/* load state */
 	vld1.32		{dga-dgb}, [r0]
 
@@ -120,4 +120,4 @@ ENTRY(sha2_ce_transform)
 	/* store new state */
 	vst1.32		{dga-dgb}, [r0]
 	bx		lr
-ENDPROC(sha2_ce_transform)
+ENDPROC(sha256_ce_transform)
diff --git linux-libre-6.15-gnu/arch/arm/lib/crypto/sha256.c linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256.c
new file mode 100644
index 000000000000..109192e54b0f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm/lib/crypto/sha256.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SHA-256 optimized for ARM
+ *
+ * Copyright 2025 Google LLC
+ */
+#include <asm/neon.h>
+#include <crypto/internal/sha2.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+asmlinkage void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS],
+				   const u8 *data, size_t nblocks);
+EXPORT_SYMBOL_GPL(sha256_blocks_arch);
+asmlinkage void sha256_block_data_order_neon(u32 state[SHA256_STATE_WORDS],
+					     const u8 *data, size_t nblocks);
+asmlinkage void sha256_ce_transform(u32 state[SHA256_STATE_WORDS],
+				    const u8 *data, size_t nblocks);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_ce);
+
+void sha256_blocks_simd(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
+	    static_branch_likely(&have_neon)) {
+		kernel_neon_begin();
+		if (static_branch_likely(&have_ce))
+			sha256_ce_transform(state, data, nblocks);
+		else
+			sha256_block_data_order_neon(state, data, nblocks);
+		kernel_neon_end();
+	} else {
+		sha256_blocks_arch(state, data, nblocks);
+	}
+}
+EXPORT_SYMBOL_GPL(sha256_blocks_simd);
+
+bool sha256_is_arch_optimized(void)
+{
+	/* We always can use at least the ARM scalar implementation. */
+	return true;
+}
+EXPORT_SYMBOL_GPL(sha256_is_arch_optimized);
+
+static int __init sha256_arm_mod_init(void)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
+		static_branch_enable(&have_neon);
+		if (elf_hwcap2 & HWCAP2_SHA2)
+			static_branch_enable(&have_ce);
+	}
+	return 0;
+}
+subsys_initcall(sha256_arm_mod_init);
+
+static void __exit sha256_arm_mod_exit(void)
+{
+}
+module_exit(sha256_arm_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-256 optimized for ARM");
diff --git linux-libre-6.15-gnu/arch/arm/mach-aspeed/Kconfig linux-libre-6.16-gnu/arch/arm/mach-aspeed/Kconfig
index 080019aa6fcd..fcf287edd0e5 100644
--- linux-libre-6.15-gnu/arch/arm/mach-aspeed/Kconfig
+++ linux-libre-6.16-gnu/arch/arm/mach-aspeed/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
 	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MFD_SYSCON
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/Kconfig linux-libre-6.16-gnu/arch/arm/mach-davinci/Kconfig
index 8f66de0405d9..6cd6d29a2c9d 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/Kconfig
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/Kconfig
@@ -19,13 +19,6 @@ if ARCH_DAVINCI
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DA830
-	bool "DA830/OMAP-L137/AM17x based system"
-	select ARCH_DAVINCI_DA8XX
-	# needed on silicon revs 1.0, 1.1:
-	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
-	select DAVINCI_CP_INTC
-
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	select ARCH_DAVINCI_DA8XX
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/Makefile linux-libre-6.16-gnu/arch/arm/mach-davinci/Makefile
index 31d22a5d8e1e..7a210db669f4 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/Makefile
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/Makefile
@@ -10,7 +10,6 @@ obj-y 					:= common.o sram.o devices-da8xx.o
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 
 obj-y					+= da8xx-dt.o
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/cputype.h linux-libre-6.16-gnu/arch/arm/mach-davinci/cputype.h
index 148a738391dc..a8f5330aaad1 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/cputype.h
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/cputype.h
@@ -25,7 +25,6 @@ struct davinci_id {
 };
 
 /* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #endif
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/da830.c linux-libre-6.16-gnu/arch/arm/mach-davinci/da830.c
deleted file mode 100644
index a044ea5cb4f1..000000000000
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/da830.c
+++ /dev/null
@@ -1,506 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 chip specific setup
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "da8xx.h"
-#include "irqs.h"
-#include "mux.h"
-
-/* Offsets of the 8 compare registers on the da830 */
-#define DA830_CMP12_0		0x60
-#define DA830_CMP12_1		0x64
-#define DA830_CMP12_2		0x68
-#define DA830_CMP12_3		0x6c
-#define DA830_CMP12_4		0x70
-#define DA830_CMP12_5		0x74
-#define DA830_CMP12_6		0x78
-#define DA830_CMP12_7		0x7c
-
-#define DA830_REF_FREQ		24000000
-
-/*
- * Device specific mux setup
- *
- *	     soc      description	mux    mode    mode   mux	dbg
- *					reg   offset   mask   mode
- */
-static const struct mux_config da830_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
-#endif
-};
-
-static struct map_desc da830_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DA8XX_CP_INTC_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
-		.length		= DA8XX_CP_INTC_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id da830_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.0",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.1",
-	},
-	{
-		.variant	= 0x9,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev2.0",
-	},
-};
-
-static const struct davinci_soc_info davinci_soc_info_da830 = {
-	.io_desc		= da830_io_desc,
-	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
-	.ids			= da830_ids,
-	.ids_num		= ARRAY_SIZE(da830_ids),
-	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
-	.pinmux_pins		= da830_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-};
-
-void __init da830_init(void)
-{
-	davinci_common_init(&davinci_soc_info_da830);
-
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
-}
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/da850.c linux-libre-6.16-gnu/arch/arm/mach-davinci/da850.c
index 287dd987908e..706f8241b5e7 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/da850.c
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/da850.c
@@ -4,7 +4,6 @@
  *
  * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
- * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
  *
  * 2009 (c) MontaVista Software, Inc.
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/da8xx.h linux-libre-6.16-gnu/arch/arm/mach-davinci/da8xx.h
index 54a255b8d8d8..70d14f7f3520 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/da8xx.h
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/da8xx.h
@@ -68,8 +68,6 @@ extern void __iomem *da8xx_syscfg1_base;
 #define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
-void da830_init(void);
-
 void da850_init(void);
 
 int da850_register_vpif_display
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/devices-da8xx.c linux-libre-6.16-gnu/arch/arm/mach-davinci/devices-da8xx.c
index 5e73a725d5da..4e9ac55ae92d 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/devices-da8xx.c
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/devices-da8xx.c
@@ -33,7 +33,6 @@
 #define DA8XX_PRUSS_MEM_BASE		0x01c30000
 #define DA8XX_MMCSD0_BASE		0x01c40000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
 #define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/irqs.h linux-libre-6.16-gnu/arch/arm/mach-davinci/irqs.h
index b1ceed81e9fa..23e8da5025ab 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/irqs.h
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/irqs.h
@@ -101,33 +101,6 @@
 #define IRQ_DA8XX_ECAP2			71
 #define IRQ_DA8XX_ARMCLKSTOPREQ		90
 
-/* DA830 specific interrupts */
-#define IRQ_DA830_MPUERR		27
-#define IRQ_DA830_IOPUERR		27
-#define IRQ_DA830_BOOTCFGERR		27
-#define IRQ_DA830_EHRPWM2		67
-#define IRQ_DA830_EHRPWM2TZ		68
-#define IRQ_DA830_EQEP0			72
-#define IRQ_DA830_EQEP1			73
-#define IRQ_DA830_T12CMPINT0_0		74
-#define IRQ_DA830_T12CMPINT1_0		75
-#define IRQ_DA830_T12CMPINT2_0		76
-#define IRQ_DA830_T12CMPINT3_0		77
-#define IRQ_DA830_T12CMPINT4_0		78
-#define IRQ_DA830_T12CMPINT5_0		79
-#define IRQ_DA830_T12CMPINT6_0		80
-#define IRQ_DA830_T12CMPINT7_0		81
-#define IRQ_DA830_T12CMPINT0_1		82
-#define IRQ_DA830_T12CMPINT1_1		83
-#define IRQ_DA830_T12CMPINT2_1		84
-#define IRQ_DA830_T12CMPINT3_1		85
-#define IRQ_DA830_T12CMPINT4_1		86
-#define IRQ_DA830_T12CMPINT5_1		87
-#define IRQ_DA830_T12CMPINT6_1		88
-#define IRQ_DA830_T12CMPINT7_1		89
-
-#define DA830_N_CP_INTC_IRQ		96
-
 /* DA850 speicific interrupts */
 #define IRQ_DA850_MPUADDRERR0		27
 #define IRQ_DA850_MPUPROTERR0		27
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/mux.h linux-libre-6.16-gnu/arch/arm/mach-davinci/mux.h
index 05fd3902df65..6325ea5a2730 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/mux.h
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/mux.h
@@ -21,410 +21,6 @@ struct mux_config {
 	bool debug;
 };
 
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
 enum davinci_da850_index {
 	/* UART0 function */
 	DA850_NUART0_CTS,
diff --git linux-libre-6.15-gnu/arch/arm/mach-davinci/psc.h linux-libre-6.16-gnu/arch/arm/mach-davinci/psc.h
index acfef063295f..6c365a2e87fe 100644
--- linux-libre-6.15-gnu/arch/arm/mach-davinci/psc.h
+++ linux-libre-6.16-gnu/arch/arm/mach-davinci/psc.h
@@ -97,9 +97,7 @@
 #define DA8XX_LPSC1_CPGMAC		5
 #define DA8XX_LPSC1_EMIF3C		6
 #define DA8XX_LPSC1_McASP0		7
-#define DA830_LPSC1_McASP1		8
 #define DA850_LPSC1_SATA		8
-#define DA830_LPSC1_McASP2		9
 #define DA850_LPSC1_VPIF		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
@@ -111,7 +109,6 @@
 #define DA8XX_LPSC1_PWM			17
 #define DA850_LPSC1_MMC_SD1		18
 #define DA8XX_LPSC1_ECAP		20
-#define DA830_LPSC1_EQEP		21
 #define DA850_LPSC1_TPTC2		21
 #define DA8XX_LPSC1_SCR_P0_SS		24
 #define DA8XX_LPSC1_SCR_P1_SS		25
diff --git linux-libre-6.15-gnu/arch/arm/mach-exynos/suspend.c linux-libre-6.16-gnu/arch/arm/mach-exynos/suspend.c
index cac4e82f6c82..150a1e56dcae 100644
--- linux-libre-6.15-gnu/arch/arm/mach-exynos/suspend.c
+++ linux-libre-6.16-gnu/arch/arm/mach-exynos/suspend.c
@@ -209,9 +209,8 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, 0,
-					  node, &exynos_pmu_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, 0, of_fwnode_handle(node),
+					     &exynos_pmu_domain_ops, NULL);
 	if (!domain) {
 		iounmap(pmu_base_addr);
 		pmu_base_addr = NULL;
diff --git linux-libre-6.15-gnu/arch/arm/mach-imx/avic.c linux-libre-6.16-gnu/arch/arm/mach-imx/avic.c
index cf6546ddc7a3..3067c06b4b8e 100644
--- linux-libre-6.15-gnu/arch/arm/mach-imx/avic.c
+++ linux-libre-6.16-gnu/arch/arm/mach-imx/avic.c
@@ -201,8 +201,8 @@ static void __init mxc_init_irq(void __iomem *irqbase)
 	WARN_ON(irq_base < 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), AVIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
diff --git linux-libre-6.15-gnu/arch/arm/mach-imx/gpc.c linux-libre-6.16-gnu/arch/arm/mach-imx/gpc.c
index 5909088d5482..2e633569d2f8 100644
--- linux-libre-6.15-gnu/arch/arm/mach-imx/gpc.c
+++ linux-libre-6.16-gnu/arch/arm/mach-imx/gpc.c
@@ -245,9 +245,8 @@ static int __init imx_gpc_init(struct device_node *node,
 	if (WARN_ON(!gpc_base))
 	        return -ENOMEM;
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
-					  node, &imx_gpc_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, GPC_MAX_IRQS, of_fwnode_handle(node),
+					     &imx_gpc_domain_ops, NULL);
 	if (!domain) {
 		iounmap(gpc_base);
 		return -ENOMEM;
diff --git linux-libre-6.15-gnu/arch/arm/mach-imx/tzic.c linux-libre-6.16-gnu/arch/arm/mach-imx/tzic.c
index 8b3d98d288d9..50a5668e65d2 100644
--- linux-libre-6.15-gnu/arch/arm/mach-imx/tzic.c
+++ linux-libre-6.16-gnu/arch/arm/mach-imx/tzic.c
@@ -175,8 +175,8 @@ static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 	irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
 	WARN_ON(irq_base < 0);
 
-	domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), TZIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < 4; i++, irq_base += 32)
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap1/irq.c linux-libre-6.16-gnu/arch/arm/mach-omap1/irq.c
index 9b587ecebb1c..bb1bc060ecd8 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap1/irq.c
+++ linux-libre-6.16-gnu/arch/arm/mach-omap1/irq.c
@@ -220,8 +220,7 @@ void __init omap1_init_irq(void)
 	omap_l2_irq = irq_base;
 	omap_l2_irq -= NR_IRQS_LEGACY;
 
-	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(NULL, nr_irqs, irq_base, 0, &irq_domain_simple_ops, NULL);
 
 	pr_info("Total of %lu interrupts in %i interrupt banks\n",
 		nr_irqs, irq_bank_count);
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap2/clockdomain.h linux-libre-6.16-gnu/arch/arm/mach-omap2/clockdomain.h
index c36fb2721261..86a2f9e5d0ef 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap2/clockdomain.h
+++ linux-libre-6.16-gnu/arch/arm/mach-omap2/clockdomain.h
@@ -48,6 +48,7 @@
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 #define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
+#define CLKDM_STANDBY_FORCE_WAKEUP		BIT(7)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c linux-libre-6.16-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
index 87f4e927eb18..c05a3c07d448 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ linux-libre-6.16-gnu/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -19,7 +19,7 @@ static struct clockdomain l4ls_am33xx_clkdm = {
 	.pwrdm		= { .name = "per_pwrdm" },
 	.cm_inst	= AM33XX_CM_PER_MOD,
 	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
-	.flags		= CLKDM_CAN_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP | CLKDM_STANDBY_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3s_am33xx_clkdm = {
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap2/cm33xx.c linux-libre-6.16-gnu/arch/arm/mach-omap2/cm33xx.c
index acdf72a541c0..a4dd42abda89 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap2/cm33xx.c
+++ linux-libre-6.16-gnu/arch/arm/mach-omap2/cm33xx.c
@@ -20,6 +20,9 @@
 #include "cm-regbits-34xx.h"
 #include "cm-regbits-33xx.h"
 #include "prm33xx.h"
+#if IS_ENABLED(CONFIG_SUSPEND)
+#include <linux/suspend.h>
+#endif
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -328,8 +331,17 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+#if IS_ENABLED(CONFIG_SUSPEND)
+	/*
+	 * In case of standby, Don't put the l4ls clk domain to sleep.
+	 * Since CM3 PM FW doesn't wake-up/enable the l4ls clk domain
+	 * upon wake-up, CM3 PM FW fails to wake-up th MPU.
+	 */
+	if (pm_suspend_target_state == PM_SUSPEND_STANDBY &&
+	    (clkdm->flags & CLKDM_STANDBY_FORCE_WAKEUP))
+		return 0;
+#endif
 	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
 	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
 		am33xx_clkdm_sleep(clkdm);
 
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap2/omap-wakeupgen.c linux-libre-6.16-gnu/arch/arm/mach-omap2/omap-wakeupgen.c
index 6f0d6120c174..a66b1dc61571 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap2/omap-wakeupgen.c
+++ linux-libre-6.16-gnu/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -585,9 +585,8 @@ static int __init wakeupgen_init(struct device_node *node,
 		wakeupgen_ops = &am43xx_wakeupgen_ops;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
-					  node, &wakeupgen_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, max_irqs, of_fwnode_handle(node),
+					     &wakeupgen_domain_ops, NULL);
 	if (!domain) {
 		iounmap(wakeupgen_base);
 		return -ENOMEM;
diff --git linux-libre-6.15-gnu/arch/arm/mach-omap2/pmic-cpcap.c linux-libre-6.16-gnu/arch/arm/mach-omap2/pmic-cpcap.c
index 4f31e61c0c90..9f9a20274db8 100644
--- linux-libre-6.15-gnu/arch/arm/mach-omap2/pmic-cpcap.c
+++ linux-libre-6.16-gnu/arch/arm/mach-omap2/pmic-cpcap.c
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/arm/mach-pxa/irq.c linux-libre-6.16-gnu/arch/arm/mach-pxa/irq.c
index d9cadd97748a..5bfce8aa4102 100644
--- linux-libre-6.15-gnu/arch/arm/mach-pxa/irq.c
+++ linux-libre-6.16-gnu/arch/arm/mach-pxa/irq.c
@@ -147,9 +147,8 @@ pxa_init_irq_common(struct device_node *node, int irq_nr,
 	int n;
 
 	pxa_internal_irq_nr = irq_nr;
-	pxa_irq_domain = irq_domain_add_legacy(node, irq_nr,
-					       PXA_IRQ(0), 0,
-					       &pxa_irq_ops, NULL);
+	pxa_irq_domain = irq_domain_create_legacy(of_fwnode_handle(node), irq_nr, PXA_IRQ(0), 0,
+						  &pxa_irq_ops, NULL);
 	if (!pxa_irq_domain)
 		panic("Unable to add PXA IRQ domain\n");
 	irq_set_default_domain(pxa_irq_domain);
diff --git linux-libre-6.15-gnu/arch/arm/mach-s3c/gpio-samsung.c linux-libre-6.16-gnu/arch/arm/mach-s3c/gpio-samsung.c
index 87daaa09e2c3..206a492fbaf5 100644
--- linux-libre-6.15-gnu/arch/arm/mach-s3c/gpio-samsung.c
+++ linux-libre-6.16-gnu/arch/arm/mach-s3c/gpio-samsung.c
@@ -11,9 +11,9 @@
 // Samsung - GPIOlib support
 
 #include <linux/kernel.h>
+#include <linux/gpio/driver.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
@@ -430,8 +430,8 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-static void samsung_gpiolib_set(struct gpio_chip *chip,
-				unsigned offset, int value)
+static int samsung_gpiolib_set(struct gpio_chip *chip, unsigned int offset,
+			       int value)
 {
 	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
 	void __iomem *base = ourchip->base;
@@ -447,6 +447,8 @@ static void samsung_gpiolib_set(struct gpio_chip *chip,
 	__raw_writel(dat, base + 0x04);
 
 	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
 }
 
 static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
@@ -515,7 +517,7 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
 	if (!gc->direction_output)
 		gc->direction_output = samsung_gpiolib_2bit_output;
 	if (!gc->set)
-		gc->set = samsung_gpiolib_set;
+		gc->set_rv = samsung_gpiolib_set;
 	if (!gc->get)
 		gc->get = samsung_gpiolib_get;
 
diff --git linux-libre-6.15-gnu/arch/arm/mach-stm32/board-dt.c linux-libre-6.16-gnu/arch/arm/mach-stm32/board-dt.c
index 5dcc4ddd1a56..e6233c8725ae 100644
--- linux-libre-6.15-gnu/arch/arm/mach-stm32/board-dt.c
+++ linux-libre-6.16-gnu/arch/arm/mach-stm32/board-dt.c
@@ -17,6 +17,7 @@ static const char *const stm32_compat[] __initconst = {
 	"st,stm32f746",
 	"st,stm32f769",
 	"st,stm32h743",
+	"st,stm32h747",
 	"st,stm32h750",
 	"st,stm32mp131",
 	"st,stm32mp133",
diff --git linux-libre-6.15-gnu/arch/arm/mm/flush.c linux-libre-6.16-gnu/arch/arm/mm/flush.c
index 0749cf8a6637..5219158d54cf 100644
--- linux-libre-6.15-gnu/arch/arm/mm/flush.c
+++ linux-libre-6.16-gnu/arch/arm/mm/flush.c
@@ -227,9 +227,9 @@ void __flush_dcache_folio(struct address_space *mapping, struct folio *folio)
 	}
 
 	/*
-	 * If this is a page cache page, and we have an aliasing VIPT cache,
+	 * If this is a page cache folio, and we have an aliasing VIPT cache,
 	 * we only need to do one flush - which would be at the relevant
-	 * userspace colour, which is congruent with page->index.
+	 * userspace colour, which is congruent with folio->index.
 	 */
 	if (mapping && cache_is_vipt_aliasing())
 		flush_pfn_alias(folio_pfn(folio), folio_pos(folio));
diff --git linux-libre-6.15-gnu/arch/arm/mm/ioremap.c linux-libre-6.16-gnu/arch/arm/mm/ioremap.c
index 748698e91a4b..27e64f782cb3 100644
--- linux-libre-6.15-gnu/arch/arm/mm/ioremap.c
+++ linux-libre-6.16-gnu/arch/arm/mm/ioremap.c
@@ -515,7 +515,5 @@ void __init early_ioremap_init(void)
 bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 				 unsigned long flags)
 {
-	unsigned long pfn = PHYS_PFN(offset);
-
-	return memblock_is_map_memory(pfn);
+	return memblock_is_map_memory(offset);
 }
diff --git linux-libre-6.15-gnu/arch/arm/mm/mmu.c linux-libre-6.16-gnu/arch/arm/mm/mmu.c
index f02f872ea8a9..edb7f56b7c91 100644
--- linux-libre-6.15-gnu/arch/arm/mm/mmu.c
+++ linux-libre-6.16-gnu/arch/arm/mm/mmu.c
@@ -735,7 +735,7 @@ static void *__init late_alloc(unsigned long sz)
 	void *ptdesc = pagetable_alloc(GFP_PGTABLE_KERNEL & ~__GFP_HIGHMEM,
 			get_order(sz));
 
-	if (!ptdesc || !pagetable_pte_ctor(ptdesc))
+	if (!ptdesc || !pagetable_pte_ctor(NULL, ptdesc))
 		BUG();
 	return ptdesc_to_virt(ptdesc);
 }
diff --git linux-libre-6.15-gnu/arch/arm/plat-orion/gpio.c linux-libre-6.16-gnu/arch/arm/plat-orion/gpio.c
index 595e9cb33c1d..ca1bd764cfa5 100644
--- linux-libre-6.15-gnu/arch/arm/plat-orion/gpio.c
+++ linux-libre-6.16-gnu/arch/arm/plat-orion/gpio.c
@@ -211,7 +211,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 	return 0;
 }
 
-static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+static int orion_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
 {
 	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -219,6 +219,8 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 	spin_lock_irqsave(&ochip->lock, flags);
 	__set_level(ochip, pin, value);
 	spin_unlock_irqrestore(&ochip->lock, flags);
+
+	return 0;
 }
 
 static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
@@ -496,11 +498,10 @@ static void orion_gpio_unmask_irq(struct irq_data *d)
 	u32 reg_val;
 	u32 mask = d->mask;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val |= mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 static void orion_gpio_mask_irq(struct irq_data *d)
@@ -510,11 +511,10 @@ static void orion_gpio_mask_irq(struct irq_data *d)
 	u32 mask = d->mask;
 	u32 reg_val;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val &= ~mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 void __init orion_gpio_init(int gpio_base, int ngpio,
@@ -540,7 +540,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	ochip->chip.direction_input = orion_gpio_direction_input;
 	ochip->chip.get = orion_gpio_get;
 	ochip->chip.direction_output = orion_gpio_direction_output;
-	ochip->chip.set = orion_gpio_set;
+	ochip->chip.set_rv = orion_gpio_set;
 	ochip->chip.to_irq = orion_gpio_to_irq;
 	ochip->chip.base = gpio_base;
 	ochip->chip.ngpio = ngpio;
@@ -602,12 +602,12 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	ochip->domain = irq_domain_add_legacy(NULL,
-					      ochip->chip.ngpio,
-					      ochip->secondary_irq_base,
-					      ochip->secondary_irq_base,
-					      &irq_domain_simple_ops,
-					      ochip);
+	ochip->domain = irq_domain_create_legacy(NULL,
+						 ochip->chip.ngpio,
+						 ochip->secondary_irq_base,
+						 ochip->secondary_irq_base,
+						 &irq_domain_simple_ops,
+						 ochip);
 	if (!ochip->domain)
 		panic("%s: couldn't allocate irq domain (DT).\n",
 		      ochip->chip.label);
diff --git linux-libre-6.15-gnu/arch/arm/probes/uprobes/core.c linux-libre-6.16-gnu/arch/arm/probes/uprobes/core.c
index f5f790c6e5f8..885e0c5e8c20 100644
--- linux-libre-6.15-gnu/arch/arm/probes/uprobes/core.c
+++ linux-libre-6.16-gnu/arch/arm/probes/uprobes/core.c
@@ -26,10 +26,10 @@ bool is_swbp_insn(uprobe_opcode_t *insn)
 		(UPROBE_SWBP_ARM_INSN & 0x0fffffff);
 }
 
-int set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
+int set_swbp(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
 	     unsigned long vaddr)
 {
-	return uprobe_write_opcode(auprobe, mm, vaddr,
+	return uprobe_write_opcode(auprobe, vma, vaddr,
 		   __opcode_to_mem_arm(auprobe->bpinsn));
 }
 
diff --git linux-libre-6.15-gnu/arch/arm/vfp/vfpmodule.c linux-libre-6.16-gnu/arch/arm/vfp/vfpmodule.c
index 7803d50b90f8..e559ad3cd148 100644
--- linux-libre-6.15-gnu/arch/arm/vfp/vfpmodule.c
+++ linux-libre-6.16-gnu/arch/arm/vfp/vfpmodule.c
@@ -877,6 +877,7 @@ void kernel_neon_begin(void)
 	 * the kernel mode NEON register contents never need to be preserved.
 	 */
 	BUG_ON(in_hardirq());
+	BUG_ON(irqs_disabled());
 	cpu = __smp_processor_id();
 
 	fpexc = fmrx(FPEXC) | FPEXC_EN;
diff --git linux-libre-6.15-gnu/arch/arm64/Kconfig linux-libre-6.16-gnu/arch/arm64/Kconfig
index a182295e6f08..393d71124f5d 100644
--- linux-libre-6.15-gnu/arch/arm64/Kconfig
+++ linux-libre-6.16-gnu/arch/arm64/Kconfig
@@ -42,6 +42,7 @@ config ARM64
 	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_NONLEAF_PMD_YOUNG if ARM64_HAFT
+	select ARCH_HAS_PREEMPT_LAZY
 	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
@@ -134,7 +135,6 @@ config ARM64
 	select COMMON_CLK
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select CPUMASK_OFFSTACK if NR_CPUS > 256
-	select CRC32
 	select DCACHE_WORD_ACCESS
 	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select DMA_BOUNCE_UNALIGNED_KMALLOC
@@ -256,6 +256,7 @@ config ARM64
 	select HOTPLUG_SMT if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select JUMP_LABEL
 	select KASAN_VMALLOC if KASAN
 	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
@@ -333,9 +334,9 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -464,6 +465,23 @@ config AMPERE_ERRATUM_AC03_CPU_38
 
 	  If unsure, say Y.
 
+config AMPERE_ERRATUM_AC04_CPU_23
+        bool "AmpereOne: AC04_CPU_23:  Failure to synchronize writes to HCR_EL2 may corrupt address translations."
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC04_CPU_23 on AmpereOne.
+
+	  Updates to HCR_EL2 can rarely corrupt simultaneous translations for
+	  data addresses initiated by load/store instructions. Only
+	  instruction initiated translations are vulnerable, not translations
+	  from prefetches for example. A DSB before the store to HCR_EL2 is
+	  sufficient to prevent older instructions from hitting the window
+	  for corruption, and an ISB after is sufficient to prevent younger
+	  instructions from hitting the window for corruption.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
@@ -642,9 +660,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -1602,6 +1617,9 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 	def_bool y
 
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+	def_bool y
+
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
@@ -1890,13 +1908,9 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
@@ -1908,20 +1922,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1995,7 +2001,6 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -2016,19 +2021,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
 endmenu # "ARMv8.3 architectural features"
 
 menu "ARMv8.4 architectural features"
@@ -2056,20 +2052,13 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
-
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
@@ -2145,7 +2134,6 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
 	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS
@@ -2285,7 +2273,6 @@ config ARM64_SME
 	bool "ARM Scalable Matrix Extension support"
 	default y
 	depends on ARM64_SVE
-	depends on BROKEN
 	help
 	  The Scalable Matrix Extension (SME) is an extension to the AArch64
 	  execution state which utilises a substantial subset of the SVE
diff --git linux-libre-6.15-gnu/arch/arm64/Kconfig.platforms linux-libre-6.16-gnu/arch/arm64/Kconfig.platforms
index 8b76821f190f..a541bb029aa4 100644
--- linux-libre-6.15-gnu/arch/arm64/Kconfig.platforms
+++ linux-libre-6.16-gnu/arch/arm64/Kconfig.platforms
@@ -269,7 +269,7 @@ config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
 	select PINCTRL
-	select HAVE_PWRCTL if PCI
+	select HAVE_PWRCTRL if PCI
 	help
 	  This enables support for the ARMv8 based Qualcomm chipsets.
 
diff --git linux-libre-6.15-gnu/arch/arm64/Makefile linux-libre-6.16-gnu/arch/arm64/Makefile
index 1d5dfcd1c13e..73a10f65ce8b 100644
--- linux-libre-6.15-gnu/arch/arm64/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/Makefile
@@ -16,14 +16,11 @@ ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -105,12 +102,8 @@ endif
 # hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
   asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
   asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
-  asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-  asm-arch := armv8.2-a
 endif
 
 ifdef asm-arch
@@ -201,16 +194,6 @@ install zinstall:
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/airoha/en7581-evb.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/airoha/en7581-evb.dts
index d53b72d18242..99d2c4f1fc5a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/airoha/en7581-evb.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -65,6 +65,36 @@
 	};
 };
 
+&en7581_pinctrl {
+	gpio-ranges = <&en7581_pinctrl 0 13 47>;
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/airoha/en7581.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/airoha/en7581.dtsi
index 26b136940917..536ece69b935 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/airoha/en7581.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -180,6 +180,111 @@
 			#reset-cells = <1>;
 		};
 
+		pbus_csr: syscon@1fbe3400 {
+			compatible = "airoha,en7581-pbus-csr", "syscon";
+			reg = <0x0 0x1fbe3400 0x0 0xff>;
+		};
+
+		pciephy: phy@1fa5a000 {
+			compatible = "airoha,en7581-pcie-phy";
+			reg = <0x0 0x1fa5a000 0x0 0xfff>,
+			      <0x0 0x1fa5b000 0x0 0xfff>,
+			      <0x0 0x1fa5c000 0x0 0xfff>,
+			      <0x0 0x1fc10044 0x0 0x4>,
+			      <0x0 0x1fc30044 0x0 0x4>,
+			      <0x0 0x1fc15030 0x0 0x104>;
+			reg-names = "csr-2l", "pma0", "pma1",
+				    "p0-xr-dtime", "p1-xr-dtime",
+				    "rx-aeq";
+			#phy-cells = <0>;
+		};
+
+		pcie0: pcie@1fc00000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc00000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1fc20000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc20000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		uart1: serial@1fbf0000 {
 			compatible = "ns16550";
 			reg = <0x0 0x1fbf0000 0x0 0x30>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/Makefile
index 00bed412ee31..773cc02a13d0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a133-liontron-h-a133l.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
@@ -48,7 +49,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-yuzukihd-chameleon.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index f9f6fea03b74..bd366389b238 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -252,6 +252,7 @@
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -267,6 +268,7 @@
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -282,6 +284,7 @@
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
new file mode 100644
index 000000000000..fe77178d3e33
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "Liontron H-A133L";
+	compatible = "liontron,h-a133l", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from a 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-codec-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <810000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-cpux";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-usb-cpus";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vcc-dram";
+};
+
+/* DCDC6 unused */
+/* DLDO3 unused */
+/* DLDO4 unused */
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-emmc";
+};
+
+/* ELDO2 unused */
+/* ELDO3 unused */
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+/* reg_drivevbus unused */
+/* dc1sw unused */
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";       /* USB A type receptacle, always powered */
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 09e71fd60785..3256acec1ff9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -124,6 +124,17 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -286,6 +297,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index be2347c8f267..231e652cab67 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -103,6 +103,17 @@
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
index 17e6aef67aaf..7906b79c0389 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -79,6 +79,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index d3caf27b6a55..01a29c1988a6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -16,7 +16,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
@@ -207,7 +203,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index f005072c68a1..dc7381c944c9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -144,7 +144,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index a3f65a45bd26..0911c537cc6b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -28,7 +28,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 2301c59b41b1..73e8604315c5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,7 +27,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -44,7 +43,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -61,7 +59,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -78,7 +75,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index d12b01c5f41b..bebfeb2a337a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -67,6 +67,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 908fa3b847a6..a8644fb52b04 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -77,6 +77,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdio0 {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index a360d8567f95..f2e3300e078a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -24,6 +24,10 @@
 	phy-supply = <&reg_dcdce>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 968960ebf1d1..085f3e4e8eaa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -50,6 +50,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index cdce3dcb8ec0..ceedae9e399b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -150,6 +150,21 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&prcm_ppu 2>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1904000 {
 			compatible = "allwinner,sun50i-h616-crypto";
 			reg = <0x01904000 0x800>;
@@ -874,6 +889,12 @@
 			#reset-cells = <1>;
 		};
 
+		prcm_ppu: power-controller@7010250 {
+			compatible = "allwinner,sun50i-h616-prcm-ppu";
+			reg = <0x07010250 0x10>;
+			#power-domain-cells = <1>;
+		};
+
 		nmi_intc: interrupt-controller@7010320 {
 			compatible = "allwinner,sun50i-h616-nmi",
 				     "allwinner,sun9i-a80-nmi";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
index e92d150aaf1c..3f416d129b72 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -10,6 +10,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
index a0fe7a9afb77..b340bbcb710d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -69,6 +69,11 @@
 
 /* USB 2 & 3 are on the FPC connector (or the exansion board) */
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
 	bus-width = <4>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index e1cd7572a14c..c51d4d9120de 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -27,6 +27,10 @@
 	motorcomm,clk-out-frequency-hz = <125000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
 &mmc0 {
 	/*
 	 * The schematic shows the card detect pin wired up to PF6, via an
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
index f828ca1ce51e..efe0faa252f5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -69,6 +69,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
new file mode 100644
index 000000000000..eae56908b9b4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Yuzuki Chameleon";
+	compatible = "yuzukihd,chameleon", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 12 IRQ_TYPE_LEVEL_LOW>;  /* PG12 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-3_3v;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 2 IRQ_TYPE_LEVEL_LOW>;	/* PC2 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* Connected to the Bluetooth UART pins of the XR829 Wifi/BT chip. */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index 7e17ca07892d..1a750c5f6fac 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -184,8 +184,11 @@
 };
 
 &codec {
-	allwinner,audio-routing = "Line Out", "LINEOUT";
+	/* Both speakers and headphone jack connected to 74HC4052D analog mux*/
+	allwinner,audio-routing = "Speaker", "LINEOUT",
+				  "Headphone", "LINEOUT";
 	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3
 	status = "okay";
 };
 
@@ -197,6 +200,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo3>;
 	disable-wp;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
new file mode 100644
index 000000000000..51cd148f4227
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun55i-a523-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "gmac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+				allwinner,pinmux = <2>;
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+				allwinner,pinmux = <2>;
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11", "PC13", "PC14",
+				       "PC15", "PC16";
+				allwinner,pinmux = <3>;
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				allwinner,pinmux = <2>;
+				function = "uart0";
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun55i-a523-ccu";
+			reg = <0x02001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+			clock-names = "hosc", "losc",
+				      "iosc", "losc-fanout";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt: watchdog@2050000 {
+			compatible = "allwinner,sun55i-a523-wdt";
+			reg = <0x2050000 0x20>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "okay";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500000 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500400 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500800 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500c00 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@2501800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@2501c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@2503000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503000 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c@2503400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503400 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C5>;
+			resets = <&ccu RST_BUS_I2C5>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun55i-a523-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		gic: interrupt-controller@3400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#interrupt-cells = <3>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x3400000 0x10000>,
+			      <0x3460000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			its: msi-controller@3440000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x3440000 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				dma-noncoherent;
+			};
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun55i-a523-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun55i-a523-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&osc24M>,
+				 <&osc24M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@4500000 {
+			compatible = "allwinner,sun55i-a523-gmac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x04500000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii0_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun55i-a523-r-ccu";
+			reg = <0x7010000 0x250>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_200M>,
+				 <&ccu CLK_PLL_AUDIO0_4X>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-periph",
+				      "pll-audio";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun55i-a523-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun55i-a523-r-pinctrl";
+			reg = <0x7022000 0x800>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB0>,
+				 <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0" ,"PL1";
+				allwinner,pinmux = <2>;
+				function = "r_i2c0";
+			};
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			resets = <&r_ccu RST_BUS_R_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun55i-a523-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&osc24M>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
new file mode 100644
index 000000000000..8bc0f2c72a24
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2025 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Radxa Cubie A5E";
+	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the USB-C connector */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_cldo3>;
+
+	allwinner,tx-delay-ps = <300>;
+	allwinner,rx-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo4>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-iowifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr4";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-mipi-cam";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-and-their-dog";
+			};
+
+			reg_cldo2: cldo2 {
+				/* not connected */
+			};
+
+			reg_cldo3: cldo3 {
+				/* IO, USB-2, 3V3, card, NAND, sensor, PI */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pj-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-mipi-dsi";
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* RISC-V management core supply */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The USB-C port is the primary power supply, so in this configuration
+	 * relies on the other end of the USB cable to supply the VBUS power.
+	 * So use this port in peripheral mode.
+	 * It is possible to supply the board with the 5V pins on the GPIO
+	 * header, and since the DCIN_5V line is hardwired to the USB-C VBUS
+	 * pins, the port turns into a host port, unconditionally supplying
+	 * power. The dr_mode property should be changed to "host" here, if
+	 * users choose this setup.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/*
+ * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to
+ * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same
+ * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power
+ * input rail.
+ * None of them seem to make any sense in relation to detecting USB devices
+ * or whether there is power provided via any USB pins: they would always
+ * report high, otherwise the system wouldn't be running.
+ * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is
+ * not connected to those pins of the USB-C connector.
+ */
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 000000000000..59db103546f6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "X96Q Pro+";
+	compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the barrel plug */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* 3.3V dummy supply for the SD card */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.0(?) GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd-dcdc4";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-aldo3";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc-bldo3";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-codec-sd";
+			};
+
+			reg_cldo2: cldo2 {
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-codec-eth-sd";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-name = "vdd-dcdc3";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/* USB0 is a USB-A receptacle, always powered, so force host mode. */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
new file mode 100644
index 000000000000..142177c1f737
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Avaota A1";
+	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc12v: vcc12v {
+		/* DC input jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc12v>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	allwinner,tx-delay-ps = <100>;
+	allwinner,rx-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-pm";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pk-vid1v8";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				/* not connected */
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	 /*
+	  * The CC pins of the USB-C port have two pull-down resistors
+	  * connected to GND, which fixes this port to a peripheral role.
+	  * There is a regulator, controlled by a GPIO, to provide VBUS power
+	  * to the port, and a VBUSDET GPIO, to detect externally provided
+	  * power, but without the CC pins there is no real way to do a
+	  * runtime role detection.
+	  */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/Makefile
index 2fbda8419c65..15e7901c1268 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,9 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
@@ -49,6 +52,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805y-xiaomi-aquaman.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
new file mode 100644
index 000000000000..f6a4c90bab3c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A4_RESET_H
+#define __DTS_AMLOGIC_A4_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-6*/
+#define RESET_U2PHY22				7
+#define RESET_USBPHY20				8
+#define RESET_U2PHY21				9
+#define RESET_USB2DRD				10
+#define RESET_U2H				11
+#define RESET_LED_CTRL				12
+/*						13-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*						34*/
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+#define RESET_VOUT_VENC				37
+#define RESET_VOUT				38
+/*						39-47 */
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB			64
+#define RESET_IRCTRL				65
+/*						66*/
+#define RESET_TS_PLL				67
+/*						68-72*/
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+/*						75-79*/
+#define RESET_MSR_CLK				80
+/*						81*/
+#define RESET_SAR_ADC				82
+/*						83-87*/
+#define RESET_ACODEC				88
+/*						89-90*/
+#define RESET_WATCHDOG				91
+/*						92-95*/
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+/*						128-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						136-137*/
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+/*						140*/
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143-144*/
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151*/
+#define RESET_SDEMMC_A				152
+/*						153*/
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175*/
+#define RESET_BRG_AO_NIC_SYS			176
+/*						177*/
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183*/
+#define RESET_BRG_AO_NIC_ALL			184
+/*						185*/
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_CLK81			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index a06838552f21..563bc2e662fa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -4,7 +4,9 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a4-reset.h"
 #include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -50,6 +52,114 @@
 };
 
 &apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a4-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
+
+		gpiox: gpio@100 {
+			reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		func-uart-a {
+			uart_a_default: group-uart-a-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 12, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 13, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 14, 1)>;
+			};
+
+			group-uart-a-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_D, 2, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_D, 3, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-b {
+			uart_b_default: group-uart-b-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_E, 0, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_E, 1, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-d {
+			uart_d_default: group-uart-d-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 18, 4)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 19, 4)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+
+			group-uart-d-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 7, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 8, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 9, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 10, 2)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-e {
+			uart_e_default: group-uart-e-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 14, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 15, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 16, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 17, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+	};
+
 	gpio_intc: interrupt-controller@4080 {
 		compatible = "amlogic,a4-gpio-intc",
 			     "amlogic,meson-gpio-intc";
@@ -60,6 +170,29 @@
 			<10 11 12 13 14 15 16 17 18 19 20 21>;
 	};
 
+	ao_pinctrl: pinctrl@8e700 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+		gpioao: gpio@4 {
+			reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+		};
+
+		test_n: gpio@44 {
+			reg = <0 0x44 0 0x20>;
+			reg-names = "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
 	gpio_ao_intc: interrupt-controller@8e72c {
 		compatible = "amlogic,a4-gpio-ao-intc",
 			     "amlogic,meson-gpio-intc";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
new file mode 100644
index 000000000000..cdf0f5159620
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A5_RESET_H
+#define __DTS_AMLOGIC_A5_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-7 */
+#define RESET_USBPHY20				8
+/*						9 */
+#define RESET_USB2DRD				10
+/*						11-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*                                              34 */
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+/*						37-40 */
+#define RESET_DSPA_DEBUG			41
+/*                                              42 */
+#define RESET_DSPA				43
+/*						44-46 */
+#define RESET_NNA				47
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB				64
+#define RESET_IRCTRL				65
+/*						66 */
+#define RESET_TS_PLL				67
+/*						68-72 */
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+#define RESET_RSA				75
+
+/*						76-79 */
+#define RESET_MSR_CLK				80
+#define RESET_SPIFC				81
+#define RESET_SAR_ADC				82
+/*						83-90 */
+#define RESET_WATCHDOG				91
+/*						92-95 */
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+#define RESET_RTC				128
+/*						129-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						104-105 */
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+#define RESET_UART_C				140
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143*/
+#define RESET_I2C_S_A				144
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151 */
+#define RESET_SDEMMC_A				152
+/*						153 */
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175 */
+#define RESET_BRG_AO_NIC_SYS			176
+#define RESET_BRG_AO_NIC_DSPA			177
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183 */
+#define RESET_BRG_AO_NIC_ALL			184
+#define RESET_BRG_NIC_NNA			185
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_SYSCLK			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index 32ed1776891b..b1da8cbaa25a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a5-reset.h"
 #include <dt-bindings/power/amlogic,a5-pwrc.h>
 / {
 	cpus {
@@ -50,6 +51,13 @@
 };
 
 &apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a5-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
 	gpio_intc: interrupt-controller@4080 {
 		compatible = "amlogic,a5-gpio-intc",
 			     "amlogic,meson-gpio-intc";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index fd0e557eba06..cb9ea3ca6ee0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -760,6 +760,11 @@
 				};
 			};
 
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,c3-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
 			spicc0: spi@50000 {
 				compatible = "amlogic,meson-g12a-spicc";
 				reg = <0x0 0x50000 0x0 0x44>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644
index 000000000000..c45b22651798
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+	model = "Amlogic S905X5 BL209 Development Board";
+	compatible = "amlogic,bl209", "amlogic,s6";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x000000 0x0 0xe0000000>,
+		      <0x1 0x000000 0x0 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 27 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644
index 000000000000..a8c90245c42a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff200000 0 0x10000>,
+			      <0x0 0xff240000 0 0x80000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s6-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
new file mode 100644
index 000000000000..7fd4ac9321a6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7.dtsi"
+/ {
+	model = "Amlogic S805X3 BP201 Development Board";
+	compatible = "amlogic,bp201", "amlogic,s7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
new file mode 100644
index 000000000000..f0c172681bd1
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+	model = "Amlogic S905X5M BM202 Development Board";
+	compatible = "amlogic,bm202", "amlogic,s7d";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 36 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..e1099bc1535d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7d-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-a1.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 1eba0afb3fd9..f7f25a10f409 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -233,6 +233,7 @@
 						groups = "uart_a_tx",
 							 "uart_a_rx";
 						function = "uart_a";
+						bias-pull-up;
 					};
 				};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index a6924d246bb1..2df143aa77ce 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1164,7 +1164,7 @@
 						groups = "uart_tx_a",
 							 "uart_rx_a";
 						function = "uart_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1182,7 +1182,7 @@
 						groups = "uart_tx_b_x",
 							 "uart_rx_b_x";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1200,7 +1200,7 @@
 						groups = "uart_tx_b_z",
 							 "uart_rx_b_z";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1218,7 +1218,7 @@
 						groups = "uart_ao_tx_b_z",
 							 "uart_ao_rx_b_z";
 						function = "uart_ao_b_z";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1654,7 +1654,7 @@
 						groups = "uart_ao_tx_a",
 							 "uart_ao_rx_a";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1672,7 +1672,7 @@
 						groups = "uart_ao_tx_b",
 							 "uart_ao_rx_b";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 69834b49673d..dcc927a9da80 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1503,7 +1503,7 @@
 							groups = "uart_a_tx",
 								 "uart_a_rx";
 							function = "uart_a";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1521,7 +1521,7 @@
 							groups = "uart_b_tx",
 								 "uart_b_rx";
 							function = "uart_b";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1918,7 +1918,7 @@
 						groups = "uart_ao_a_tx",
 							 "uart_ao_a_rx";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1936,7 +1936,7 @@
 						groups = "uart_ao_b_tx_2",
 							 "uart_ao_b_rx_3";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1945,7 +1945,7 @@
 						groups = "uart_ao_b_tx_8",
 							 "uart_ao_b_rx_9";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
index 9aa36f17ffa2..d0a3b4b9229c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -267,28 +267,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index 952b8d02e5c2..4353485c6f26 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -220,28 +220,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 52fbc5103e45..f39fcabc763f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -314,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 5407049d2647..b5bf8ecc91e6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -407,28 +407,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &clkc_audio {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 01da83658ae3..5ab460a3e637 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -263,28 +263,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 543e70669df5..deee61dbe074 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -62,6 +62,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
index adedc1340c78..415248931ab1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -76,42 +76,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 92e8b26ecccc..39011b645128 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -155,42 +155,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 54663c55a20e..1b08303c4282 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -263,42 +263,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 48650bad230d..fc737499f207 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,42 +51,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index e21831dfceee..d5938a4a6da3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -281,42 +281,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 /* RK817 only supports 12.5mV steps, round up the values */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
index 7e8964bacfce..3298d59833b6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -227,42 +227,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index fc05ecf90714..1e5c6f984945 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -259,42 +259,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index a7a0fc264cdc..9b6d780eada7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -213,42 +213,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 6c134592c7bb..f69923da07fe 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -105,7 +105,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -122,7 +122,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -520,7 +520,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -538,7 +538,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -556,7 +556,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
new file mode 100644
index 000000000000..cac15b89c573
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ * Heavily based on meson-gxl-s805x-p241.dtb:
+ *  - Copyright (c) 2018 BayLibre, SAS.
+ *    Author: Neil Armstrong <narmstrong@baylibre.com>
+ *    Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805y.dtsi"
+
+/ {
+	compatible = "xiaomi,aquaman", "amlogic,s805y", "amlogic,meson-gxl";
+	model = "Xiaomi Mi TV Stick (aquaman)";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "XIAOMI-AQUAMAN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module (Amlogic W155S1 / Realtek RTL8821CS) */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * This is connected to the Bluetooth module
+ * Note: There's no driver for the Bluetooth module of some variants yet.
+ */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&vcc_5v>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
new file mode 100644
index 000000000000..49b29b71f732
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ */
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,s805y", "amlogic,meson-gxl";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 19b8a39de6a0..ba535010a3c9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -163,7 +163,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -180,7 +180,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -188,7 +188,7 @@
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -214,7 +214,7 @@
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -522,7 +522,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -540,7 +540,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -558,7 +558,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -576,7 +576,7 @@
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -585,7 +585,7 @@
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -594,7 +594,7 @@
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -603,7 +603,7 @@
 				groups = "i2c_sck_c_dv19",
 				      "i2c_sda_c_dv18";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
index 942df754a0ed..1221f4545130 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
@@ -38,6 +38,10 @@
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
 &usb {
 	dr_mode = "host";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 957577d986c0..9d99ed2994df 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -629,6 +629,11 @@
 				};
 			};
 
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,s4-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
 			spicc0: spi@50000 {
 				compatible = "amlogic,meson-g12a-spicc";
 				reg = <0x0 0x50000 0x0 0x44>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index a3463149db3d..9be3084b090d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -147,28 +147,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 40db95f64636..538b35036954 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -185,28 +185,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 5d75ad3f3e46..a3d9b66b6878 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,28 +51,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ad8d07883760..c4524eb4f099 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -250,28 +250,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
index 537370db360f..5daadfb170b4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -64,26 +64,22 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 37d7f64b6d5d..024d2eb8e6ee 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -359,28 +359,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 97e4b52066dc..966ebb19cc55 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -100,6 +100,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s5l8960x.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s5l8960x.dtsi
index d820b0e43050..5b5175d6978c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s5l8960x.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -37,6 +37,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
@@ -47,6 +50,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s800-0-3.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s800-0-3.dtsi
index c0e9ae45627c..09db4ed64054 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s800-0-3.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -36,6 +36,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
@@ -46,6 +49,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s8001.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s8001.dtsi
index d56d49c048bb..fee350765894 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/s8001.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -36,6 +36,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
@@ -46,6 +49,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/spi1-nvram.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
index 3df2fd3993b5..9740fbf200f0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
@@ -20,8 +20,6 @@
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <25000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t6001.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t6001.dtsi
index 620b17e4031f..d2cf81926f28 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t6001.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t6002.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t6002.dtsi
index a963a5011799..e36f422d257d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t6002.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t600x-die0.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index e9b3140ba1a9..110bc6719512 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -45,6 +45,63 @@
 				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xf SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
 	wdt: watchdog@2922b0000 {
 		compatible = "apple,t6000-wdt", "apple,wdt";
 		reg = <0x2 0x922b0000 0x0 0x4000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t7000.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t7000.dtsi
index 85a34dc7bc01..52edc8d776a9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t7000.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -37,6 +37,9 @@
 			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
@@ -47,6 +50,16 @@
 			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t7001.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t7001.dtsi
index 8e2c67e19c41..a2efa81305df 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t7001.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -39,6 +39,9 @@
 			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +52,9 @@
 			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu2: cpu@2 {
@@ -59,6 +65,16 @@
 			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8010.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8010.dtsi
index 17e294bd7c44..b961d4f65bc3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8010.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -36,6 +36,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu1: cpu@1 {
@@ -46,6 +49,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8011.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8011.dtsi
index 5b280c896b76..974f78cc77cf 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8011.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -36,6 +36,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu1: cpu@1 {
@@ -46,6 +49,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu2: cpu@2 {
@@ -56,6 +62,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>; /* P-cluster */
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8012.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8012.dtsi
index 42df2f51ad7b..a259e5735d93 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8012.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -36,6 +36,9 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu1: cpu@10001 {
@@ -46,6 +49,16 @@
 			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8015.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8015.dtsi
index 4d54afcecd50..12acf8fc8bc6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8015.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -63,6 +63,9 @@
 			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e1: cpu@1 {
@@ -74,6 +77,9 @@
 			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e2: cpu@2 {
@@ -85,6 +91,9 @@
 			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e3: cpu@3 {
@@ -96,6 +105,9 @@
 			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_p0: cpu@10004 {
@@ -107,6 +119,9 @@
 			capacity-dmips-mhz = <1024>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu_p1: cpu@10005 {
@@ -118,6 +133,23 @@
 			capacity-dmips-mhz = <1024>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
index 3ef5de9bf5d6..d1114510f60a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -100,6 +100,8 @@
 
 &displaydfr_mipi {
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
 
 	dfr_panel: panel@0 {
 		compatible = "apple,j293-summit", "apple,summit";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 8e82231acab5..0c8206156bfe 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,7 +71,7 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
 		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
index 97b6a067394e..3a204845b85b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -404,8 +405,6 @@
 			compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
 			reg = <0x2 0x28600000 0x0 0x100000>;
 			power-domains = <&ps_mipi_dsi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			ports {
@@ -741,6 +740,63 @@
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@f {
+				compatible = "apple,sera-pmic", "apple,spmi-nvmem";
+				reg = <0xf SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boot_stage: boot-stage@9f01 {
+						reg = <0x9f01 0x1>;
+					};
+
+					boot_error_count: boot-error-count@9f02 {
+						reg = <0x9f02 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@9f02 {
+						reg = <0x9f02 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@9f03 {
+						reg = <0x9f03 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@9f0f {
+						reg = <0x9f0f 0x1>;
+						bits = <3 1>;
+					};
+
+					fault_shadow: fault-shadow@a67b {
+						reg = <0xa67b 0x10>;
+					};
+
+					socd: socd@ab00 {
+						reg = <0xab00 0x400>;
+					};
+
+					pm_setting: pm-setting@d001 {
+						reg = <0xd001 0x1>;
+					};
+
+					rtc_offset: rtc-offset@d100 {
+						reg = <0xd100 0x6>;
+					};
+				};
+			};
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8112-j493.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8112-j493.dts
index 62fbbf196762..79bfd1f13410 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8112-j493.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -63,6 +63,8 @@
 
 &displaydfr_mipi {
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
 
 	dfr_panel: panel@0 {
 		compatible = "apple,j493-summit", "apple,summit";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8112.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8112.dtsi
index d9b966d68e4f..f68354194355 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/apple/t8112.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -420,8 +420,6 @@
 			compatible = "apple,t8112-display-pipe-mipi", "apple,h7-display-pipe-mipi";
 			reg = <0x2 0x28600000 0x0 0x100000>;
 			power-domains = <&ps_mipi_dsi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			ports {
@@ -782,6 +780,63 @@
 			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@e {
+				compatible = "apple,stowe-pmic", "apple,spmi-nvmem";
+				reg = <0xe SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fault_shadow: fault-shadow@867b {
+						reg = <0x867b 0x10>;
+					};
+
+					socd: socd@8b00 {
+						reg = <0x8b00 0x400>;
+					};
+
+					boot_stage: boot-stage@f701 {
+						reg = <0xf701 0x1>;
+					};
+
+					boot_error_count: boot-error-count@f702 {
+						reg = <0xf702 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@f702 {
+						reg = <0xf702 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@f703 {
+						reg = <0xf703 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@f70f {
+						reg = <0xf70f 0x1>;
+						bits = <3 1>;
+					};
+
+					pm_setting: pm-setting@f801 {
+						reg = <0xf801 0x1>;
+					};
+
+					rtc_offset: rtc-offset@f900 {
+						reg = <0xf900 0x6>;
+					};
+				};
+			};
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/corstone1000.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/corstone1000.dtsi
index 56ada8728b60..f35a5c96f3da 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -109,7 +109,6 @@
 			reg = <0x1a220000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clock-frequency = <50000000>;
 			ranges;
 
 			frame@1a230000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/foundation-v8.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 083be35495b3..a4b2b78d4df3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -77,7 +77,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/fvp-base-revc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 9e10d7a6b5a2..68a69f17e93d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -44,6 +44,30 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+				status = "disabled";
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+				status = "disabled";
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
@@ -56,6 +80,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
@@ -69,6 +94,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
@@ -82,6 +108,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
@@ -95,6 +122,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
@@ -108,6 +136,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
@@ -121,6 +150,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
@@ -134,6 +164,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
@@ -147,6 +178,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		C0_L2: l2-cache0 {
 			compatible = "cache";
@@ -169,7 +201,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
+		reg = <0x00000000 0x80000000 0 0x7c000000>,
 		      <0x00000008 0x80000000 0 0x80000000>;
 	};
 
@@ -217,6 +249,19 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -227,6 +272,60 @@
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+		status = "disabled";
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+		status = "disabled";
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+		status = "disabled";
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+		status = "disabled";
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+		status = "disabled";
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+		status = "disabled";
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+		status = "disabled";
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+		status = "disabled";
+	};
+
+	trbe {
+		compatible = "arm,trace-buffer-extension";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
 	pci: pci@40000000 {
 		#address-cells = <0x3>;
 		#size-cells = <0x2>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
index 055764d0b9e5..9ccb80821bdb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -10,7 +10,6 @@
 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
 		reg = <0x0 0x2a810000 0x0 0x10000>;
-		clock-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2a820000 0x20000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 7f7226711d4b..a4a29193d4eb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -116,7 +116,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
index 7e3cef2ed352..fb5415eb347a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
@@ -81,3 +81,39 @@
 				  "UART1_TO_RSP";	/* GPIO_15 */
 	};
 };
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names = "PERST_N",		/* GPIO_0 */
+			  "LM96063_ALERT_N",	/* GPIO_1 */
+			  "INA3221_PV",		/* GPIO_2 */
+			  "INA3221_CRIT",	/* GPIO_3 */
+			  "INA3221_WARN",	/* GPIO_4 */
+			  "INA3221_TC",		/* GPIO_5 */
+			  "QSPI0_RST_N",	/* GPIO_6 */
+			  "LM96063_TCRIT_N",	/* GPIO_7 */
+			  "DSI_TCH_INT",	/* GPIO_8 */
+			  "DSI_RST",		/* GPIO_9 */
+			  "DSI_BL",		/* GPIO_10 */
+			  "DSI_INT",		/* GPIO_11 */
+			  "ETH_RST",		/* GPIO_12 */
+			  "CSI0_RST",		/* GPIO_13 */
+			  "CSI0_PWDN",		/* GPIO_14 */
+			  "CSI1_RST",		/* GPIO_15 */
+			  "CSI1_PWDN",		/* GPIO_16 */
+			  "CSI2_RST",		/* GPIO_17 */
+			  "CSI2_PWDN",		/* GPIO_18 */
+			  "CSI3_RST",		/* GPIO_19 */
+			  "CSI3_PWDN",		/* GPIO_20 */
+			  "ADAC_RST",		/* GPIO_21 */
+			  "SD_SW_VDD",		/* GPIO_22 */
+			  "SD_PON_VDD",		/* GPIO_23 */
+			  "GPIO_EXP_INT",	/* GPIO_24 */
+			  "BOARD_ID_0",		/* GPIO_25 */
+			  "SDIO1_SW_VDD",	/* GPIO_26 */
+			  "SDIO1_PON_VDD",	/* GPIO_27 */
+			  "SDIO2_SW_VDD",	/* GPIO_28 */
+			  "SDIO2_PON_VDD",	/* GPIO_29 */
+			  "BOARD_ID_1",		/* GPIO_30 */
+			  "BOARD_ID_2";		/* GPIO_31 */
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
index 7d399e6a532f..5a6c882b2f57 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
@@ -120,6 +120,18 @@
 						 IRQ_TYPE_LEVEL_LOW)>;
 		};
 
+		gpio0: gpio@4c0000 {
+			compatible = "blaize,blzp1600-gpio";
+			reg = <0x4c0000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@4d0000 {
 			compatible = "ns16550a";
 			reg = <0x4d0000 0x1000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/Makefile
index 3d0efb93b06d..01ecfa304184 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
 			      bcm2712-rpi-5-b.dtb \
 			      bcm2712-d-rpi-5-b.dtb \
+			      bcm2837-rpi-2-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index fbc56309660f..34470e3d7171 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -104,3 +104,11 @@
 	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
 	clock-names = "hdmi", "bvb", "audio", "cec";
 };
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 9e610a89a337..0a9212d3106f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -64,7 +64,7 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l0>;
 
-			l2_cache_l0: l2-cache-l0 {
+			l2_cache_l0: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -88,7 +88,7 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l1>;
 
-			l2_cache_l1: l2-cache-l1 {
+			l2_cache_l1: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -112,7 +112,7 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l2>;
 
-			l2_cache_l2: l2-cache-l2 {
+			l2_cache_l2: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -136,7 +136,7 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l3>;
 
-			l2_cache_l3: l2-cache-l3 {
+			l2_cache_l3: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -192,6 +192,12 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		pcie_rescal: reset-controller@119500 {
+			compatible = "brcm,bcm7216-pcie-sata-rescal";
+			reg = <0x00119500 0x10>;
+			#reset-cells = <0>;
+		};
+
 		sdio1: mmc@fff000 {
 			compatible = "brcm,bcm2712-sdhci",
 				     "brcm,sdhci-brcmstb";
@@ -204,6 +210,12 @@
 			mmc-ddr-3_3v;
 		};
 
+		bcm_reset: reset-controller@1504318 {
+			compatible = "brcm,brcmstb-reset";
+			reg = <0x01504318 0x30>;
+			#reset-cells = <1>;
+		};
+
 		system_timer: timer@7c003000 {
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7c003000 0x1000>;
@@ -426,6 +438,141 @@
 		vc4: gpu {
 			compatible = "brcm,bcm2712-vc6";
 		};
+
+		pcie0: pcie@1000100000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00100000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 42>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x17 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x14 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1000110000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00110000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 43>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip1>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1b 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x18 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, non-prefetchable at PCIe 10_0000_0000 */
+				<0x03000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP1 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00131000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pcie@1000120000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00120000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			max-link-speed = <2>;
+			num-lanes = <4>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 44>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x1c 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 4MiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0x00400000>,
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP0 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00130000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		mip0: msi-controller@1000130000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00130000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+			brcm,msi-offset = <0>;
+		};
+
+		mip1: msi-controller@1000131000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00131000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
+			brcm,msi-offset = <8>;
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..57742ed40049
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-2-b.dts"
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/Makefile
index f6f4bc650a94..89c90564c3d8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/Makefile
@@ -5,6 +5,9 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
+	exynos7870-a2corelte.dtb	\
+	exynos7870-j6lte.dtb		\
+	exynos7870-on7xelte.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
 	exynos8895-dreamlte.dtb		\
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
new file mode 100644
index 000000000000..eb7b48593187
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A2 Core (a2corelte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A2 Core";
+	compatible = "samsung,a2corelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			width = <540>;
+			height = <960>;
+			stride = <(540 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3f200000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fixed_proxled: regulator-fixed-proxled {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_proxled";
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpd4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46800000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		st,drdy-int-pin = <1>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		vdd-supply = <&vdd_ldo35>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <539>;
+			syna,clip-y-high = <959>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <110>;
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
new file mode 100644
index 000000000000..61eec1aff32e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J6 (j6lte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J6";
+	compatible = "samsung,j6lte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			width = <720>;
+			height = <1480>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-hall-effect-sensor {
+		compatible = "gpio-keys";
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_irq>;
+
+		event-hall-effect-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpa1 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3d800000>,
+		      <0x0 0x80000000 0x7d800000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "-1", "0",  "0",
+				"0", "1",  "0",
+				"0", "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1480>;
+
+		vdd-supply = <&vdd_ldo34>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hall_irq: hall-irq-pins {
+		samsung,pins = "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
new file mode 100644
index 000000000000..eb97dcc41542
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J7 Prime (on7xelte) device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J7 Prime";
+	compatible = "samsung,on7xelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_home &key_power &key_voldown &key_volup>;
+
+		key-home {
+			label = "Home Key";
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3e400000>,
+		      <0x0 0x80000000 0xbe400000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		interrupt-parent = <&gpc3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <1079>;
+			syna,clip-y-high = <1919>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <121>;
+		};
+	};
+};
+
+&i2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "1",  "0",  "0",
+			       "0", "-1",  "0",
+			       "0",  "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_home: key-home-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	tkey_irq: tkey-irq-pins {
+		samsung,pins = "gpa1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&pinctrl_touch {
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 1 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
new file mode 100644
index 000000000000..99a28d06aee7
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpa1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_i2c: gnss-sensor-i2c-pins {
+		samsung,pins = "gpa2-5", "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_irq: gnss-sensor-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	nfc_int: nfc-int-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpa1-1", "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_sleep: uart2-sleep-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz2: gpz2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s_amp_bus: i2s-amp-bus-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_amp_bus_idle: i2s-amp-bus-idle-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus: i2s-bt-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus_idle: i2s-bt-bus-idle-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_pmic_amp_bus: i2s-pmic-amp-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_amp_bus_idle: i2s-pmic-amp-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus: i2s-pmic-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus_idle: i2s-pmic-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_fm_bus: i2s-fm-bus-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_fm_bus_idle: i2s-fm-bus-idle-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_ese {
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc7-3", "gpc7-2", "gpc7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs0: spi0-cs0-pins {
+		samsung,pins = "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs1: spi0-cs1-pins {
+		samsung,pins = "gpc7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_clk_fast_slew_rate_5x: sd0-clk-fast-slew-rate-5x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR5>;
+	};
+
+	sd0_clk_fast_slew_rate_6x: sd0-clk-fast-slew-rate-6x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-3", "gpr4-4", "gpr4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_mif {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpm0-1", "gpm0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_en: nfc-en-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_n5_clk_req: nfc-n5-clk-req-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_pd: nfc-pd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_top {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	decon_te_off: decon-te-off-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_te_on: decon-te-on-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	ese_pvdd_en: ese-pvdd-en-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	fimc_is_flash: fimc-is-flash-pins {
+		samsung,pins = "gpd3-2", "gpd3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_fn: fimc-is-mclk0-fn-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk0_in: fimc-is-mclk0-in-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_out: fimc-is-mclk0-out-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk1_fn: fimc-is-mclk1-fn-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk1_in: fimc-is-mclk1-in-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk1_out: fimc-is-mclk1-out-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_fn: fimc-is-mclk2-fn-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_out: fimc-is-mclk2-out-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+		samsung,pin-val = <0>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpf0-1", "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpf1-1", "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpf0-3", "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpf2-1", "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpf3-0", "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpc4-1", "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpc8-1", "gpc8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpc9-1", "gpc9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpc4-3", "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c8_bus: i2c8-bus-pins {
+		samsung,pins = "gpc5-1", "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_n5_firm: nfc-n5-firm-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_pvdd_en: nfc-pvdd-en-pins {
+		samsung,pins = "gpd2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpf3-3", "gpf3-2", "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs0: spi1-cs0-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs1: spi1-cs1-pins {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpf4-3", "gpf4-2", "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs0: spi2-cs0-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs1: spi2-cs1-pins {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus_suspend: spi3-bus-suspend-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpc4-2", "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_miso: spi4-miso-pins {
+		samsung,pins = "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	spi4_mosi_sck_ssn: spi4-mosi-sck-ssn-pins {
+		samsung,pins = "gpc5-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpb0-3", "gpb0-2", "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+};
+
+&pinctrl_touch {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	ese_cs_func: ese-cs-func-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	ese_cs_func_suspend: ese-cs-func-suspend-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos7870.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870.dtsi
new file mode 100644
index 000000000000..5cba8c9bb403
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos7870.dtsi
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos7870-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7870";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_ese;
+		pinctrl3 = &pinctrl_fsys;
+		pinctrl4 = &pinctrl_mif;
+		pinctrl5 = &pinctrl_nfc;
+		pinctrl6 = &pinctrl_top;
+		pinctrl7 = &pinctrl_touch;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: oscclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10100000 {
+			compatible = "samsung,exynos7870-chipid",
+				     "samsung,exynos4210-chipid";
+			reg = <0x10100000 0x100>;
+		};
+
+		cmu_peri: clock-controller@101f0000 {
+			compatible = "samsung,exynos7870-cmu-peri";
+			reg = <0x101f0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "spi0", "spi1", "spi2",
+				      "spi3", "spi4", "uart0", "uart1", "uart2";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
+		};
+
+		cmu_mif: clock-controller@10460000 {
+			compatible = "samsung,exynos7870-cmu-mif";
+			reg = <0x10460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&oscclk>;
+		};
+
+		pmu_system_controller: system-controller@10480000 {
+			compatible = "samsung,exynos7870-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x10480000 0x10000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x080c>;
+				mode-bootloader = <0x1234567d>;
+				mode-download = <0x12345671>;
+				mode-recovery = <0x12345674>;
+			};
+		};
+
+		gic: interrupt-controller@104e1000 {
+			compatible = "arm,cortex-a15-gic";
+			reg = <0x104e1000 0x1000>,
+			      <0x104e2000 0x1000>,
+			      <0x104e4000 0x2000>,
+			      <0x104e6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		hsi2c0: i2c@10510000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x10510000 0x2000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c0_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_mif CLK_GOUT_MIF_HSI2C_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_mif: pinctrl@10530000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x10530000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpu: gpu@11400000 {
+			compatible = "samsung,exynos7870-mali", "arm,mali-t830";
+			reg = <0x11400000 0x5000>;
+			interrupt-names = "job", "mmu", "gpu";
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "core", "bus";
+			clocks = <&cmu_g3d CLK_GOUT_G3D_CLK>,
+				 <&cmu_g3d CLK_GOUT_G3D_ASYNCS_D0_CLK>;
+
+			status = "disabled";
+		};
+
+		cmu_g3d: clock-controller@11460000 {
+			compatible = "samsung,exynos7870-cmu-g3d";
+			reg = <0x11460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "switch";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_G3D_SWITCH>;
+		};
+
+		cmu_mfcmscl: clock-controller@12cb0000 {
+			compatible = "samsung,exynos7870-cmu-mfcmscl";
+			reg = <0x12cb0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "mfc", "mscl";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MFC>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MSCL>;
+		};
+
+		mmc0: mmc@13540000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13540000 0x2000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC0_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC0>;
+
+			status = "disabled";
+		};
+
+		mmc1: mmc@13550000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13550000 0x2000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC1_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC1>;
+
+			status = "disabled";
+		};
+
+		mmc2: mmc@13560000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13560000 0x2000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC2_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC2>;
+
+			status = "disabled";
+		};
+
+		usbdrd_phy: phy@135c0000 {
+			compatible = "samsung,exynos7870-usbdrd-phy";
+			reg = <0x135c0000 0x100>;
+			#phy-cells = <1>;
+
+			clock-names = "phy", "ref";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MUX_USB20DRD_PHYCLOCK_USER>,
+				 <&cmu_fsys CLK_GOUT_FSYS_MUX_USB_PLL>;
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+		};
+
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos7870-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			clock-names = "bus_early", "ref", "ctrl";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_ACLK_HSDRD>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HSDRD_REF_CLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HCLK_USB20_CTRL>;
+
+			status = "disabled";
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+
+				phy-names = "usb2-phy";
+				phys = <&usbdrd_phy 0>;
+
+				usb-role-switch;
+			};
+		};
+
+		cmu_fsys: clock-controller@13730000 {
+			compatible = "samsung,exynos7870-cmu-fsys";
+			reg = <0x13730000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "usb20drd";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_USB20DRD_REFCLK>;
+		};
+
+		pinctrl_fsys: pinctrl@13750000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x13750000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@13800000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART0_EXT_UCLK>;
+
+			samsung,uart-fifosize = <16>;
+
+			status = "disabled";
+		};
+
+		serial1: serial@13810000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART1_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@13820000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART2_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@13830000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C0_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@13840000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C1_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@13850000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C2_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@13860000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C3_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@13870000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C4_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c5: i2c@13880000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C5_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c6: i2c@13890000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C6_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c1: i2c@138a0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138a0000 0x1000>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c1_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C1_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c2: i2c@138b0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138b0000 0x1000>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c2_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C2_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c3: i2c@138c0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138c0000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c3_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C3_IPCLK>;
+
+			status = "disabled";
+		};
+
+		i2c7: i2c@138d0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C7_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c8: i2c@138e0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138e0000 0x100>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C8_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c4: i2c@138f0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138f0000 0x1000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c4_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C4_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c5: i2c@13950000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13950000 0x1000>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c5_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C5_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c6: i2c@13960000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13960000 0x1000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c6_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C6_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@139c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139c0000 0x1000>;
+			interrupts = <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@139d0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@139e0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139e0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@139f0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139f0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7870-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		cmu_isp: clock-controller@144d0000 {
+			compatible = "samsung,exynos7870-cmu-isp";
+			reg = <0x144d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "cam", "isp", "vra";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_CAM>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_ISP>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>;
+		};
+
+		pinctrl_dispaud: pinctrl@148c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x148c0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_dispaud: clock-controller@148d0000 {
+			compatible = "samsung,exynos7870-cmu-dispaud";
+			reg = <0x148d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "decon_eclk", "decon_vclk";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos7870-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
index f1c8b4613cbc..cb55015c8dce 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -651,7 +651,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -677,7 +677,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138a00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1020>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -706,7 +706,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138b00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1030>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -735,7 +735,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138c00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1040>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -764,7 +764,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x139400c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1050>;
-			samsung,mode = <USI_V2_SPI>;
+			samsung,mode = <USI_MODE_SPI>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -796,7 +796,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d000c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2000>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -855,7 +855,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d200c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2010>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b36292a7db64..66628cb32776 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -442,7 +442,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103000c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -505,7 +505,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103100c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -534,7 +534,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103200c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -597,7 +597,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103300c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -626,7 +626,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103400c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -689,7 +689,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103500c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103600c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -781,7 +781,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103700c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -810,7 +810,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -873,7 +873,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103900c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -902,7 +902,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -965,7 +965,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -994,7 +994,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109000c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1057,7 +1057,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109100c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1086,7 +1086,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109200c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1149,7 +1149,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109300c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1178,7 +1178,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109400c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1241,7 +1241,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109500c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1270,7 +1270,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109600c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1333,7 +1333,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1362,7 +1362,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109800c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1425,7 +1425,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109900c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1454,7 +1454,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1515,7 +1515,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index fc6ac531d597..2cb8041c8a9f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -433,7 +433,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x108800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -457,6 +457,238 @@
 			};
 		};
 
+		usi_1: usi@108a00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@108a0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108a0000 0xc0>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@108c00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108c00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@108c0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108c0000 0xc0>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@108e00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108e00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@108e0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108e0000 0xc0>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@109000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10900000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@109200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@10920000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10940000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10960000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10980000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
 		pwm: pwm@109b0000 {
 			compatible = "samsung,exynosautov920-pwm",
 				     "samsung,exynos4210-pwm";
@@ -493,6 +725,267 @@
 			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		usi_9: usi@10c800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10c800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10c8000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10c80000 0xc0>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@10ca00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ca00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10ca0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ca0000 0xc0>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@10cc00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10cc00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@10cc0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10cc0000 0xc0>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_12: usi@10ce00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ce00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_12: serial@10ce0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ce0000 0xc0>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart12_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_13: usi@10d000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_13: serial@10d00000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d00000 0xc0>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart13_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_14: usi@10d200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_14: serial@10d20000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart14_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_15: usi@10d400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_15: serial@10d40000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart15_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_16: usi@10d600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_16: serial@10d60000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart16_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_17: usi@10d800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_17: serial@10d80000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d80000 0xc0>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart17_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
 		cmu_top: clock-controller@11000000 {
 			compatible = "samsung,exynosautov920-cmu-top";
 			reg = <0x11000000 0x8000>;
@@ -582,6 +1075,47 @@
 			compatible = "samsung,exynosautov920-pinctrl";
 			reg = <0x1a460000 0x10000>;
 		};
+
+		cmu_cpucl0: clock-controller@1ec00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl0";
+			reg = <0x1ec00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_DBG>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster",
+				      "dbg";
+		};
+
+		cmu_cpucl1: clock-controller@1ed00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl1";
+			reg = <0x1ed00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+
+		cmu_cpucl2: clock-controller@1ee00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl2";
+			reg = <0x1ee00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
index b25230495c64..d6ddcc13f7b2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -279,12 +279,12 @@
 };
 
 &usi8 {
-	samsung,mode = <USI_V2_I2C>;
+	samsung,mode = <USI_MODE_I2C>;
 	status = "okay";
 };
 
 &usi12 {
-	samsung,mode = <USI_V2_I2C>;
+	samsung,mode = <USI_MODE_I2C>;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 3de3a758f113..48c691fd0a3a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -833,7 +833,7 @@
 				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			status = "disabled";
 
 			serial_0: serial@10a00000 {
@@ -1405,6 +1405,7 @@
 		pmu_system_controller: system-controller@17460000 {
 			compatible = "google,gs101-pmu", "syscon";
 			reg = <0x17460000 0x10000>;
+			google,pmu-intr-gen-syscon = <&pmu_intr_gen>;
 
 			poweroff: syscon-poweroff {
 				compatible = "syscon-poweroff";
@@ -1434,6 +1435,11 @@
 			};
 		};
 
+		pmu_intr_gen: syscon@17470000 {
+			compatible = "google,gs101-pmu-intr-gen", "syscon";
+			reg = <0x17470000 0x10000>;
+		};
+
 		pinctrl_gpio_alive: pinctrl@174d0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174d0000 0x00001000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/Makefile
index b6d3fe26d621..0b473a23d120 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/Makefile
@@ -104,7 +104,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+
+imx8dxl-evk-pcie-ep-dtbs += imx8dxl-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
@@ -112,6 +117,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+
+imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
+imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
@@ -200,8 +210,12 @@ imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc.dtb
+imx8mp-libra-rdk-fpsc-lvds-dtbs += imx8mp-libra-rdk-fpsc.dtb imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
 imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
@@ -212,6 +226,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
@@ -237,7 +252,7 @@ imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-
 imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo
 imx8mp-evk-lvds1-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-lvds-hdmi.dtbo
 imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
-imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx8mp-evk-pcie-ep.dtbo
+imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-lvds-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtb
@@ -247,10 +262,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb
 
 imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
 imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk-pcie1-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
@@ -284,10 +308,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 
-imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx8qxp-mek-pcie-ep.dtbo
+imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
 
@@ -297,12 +322,23 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
+
+imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
+imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
+imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb
 
 imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0baf256b4400..983b2f0e8797 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -687,11 +687,12 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			big-endian;
 		};
 
 		edma0: dma-controller@2c00000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk-pcie-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
similarity index 64%
rename from arch/arm64/boot/dts/freescale/imx8mp-evk-pcie-ep.dtso
rename to arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
index 244e820699b5..ed73284d9bb6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk-pcie-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
@@ -6,12 +6,10 @@
 /dts-v1/;
 /plugin/;
 
-&pcie {
+&pcie0 {
 	status = "disabled";
 };
 
-&pcie_ep {
-	pinctrl-0 = <&pinctrl_pcie0>;
-	pinctrl-names = "default";
+&pcie0_ep {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
new file mode 100644
index 000000000000..0e7ef7ef8560
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie1 {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
index dc127298715b..311d4950793c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -104,7 +104,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
@@ -121,7 +124,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
index d4a1ad528f65..3d8731504ce1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -191,7 +191,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
@@ -208,7 +211,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 5e132c83e1b2..106e802a68ba 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -240,7 +240,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
 /* TODO: Apalis BKL1_PWM */
 
@@ -257,7 +260,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index dbea1eefdeec..6f27a9cc2494 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -339,6 +339,25 @@
 	pinctrl-0 = <&pinctrl_flexcan3>;
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refa_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+	enable-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
+&hsio_refb_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+	clocks = <&hsio_refa_clk>;
+	enable-gpios = <&lsio_gpio2 11 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
 &gpu_alert0 {
@@ -514,7 +533,10 @@
 			  "MXM3_112",
 			  "MXM3_118",
 			  "MXM3_114",
-			  "MXM3_116";
+			  "MXM3_116",
+			  "",
+			  "",
+			  "MXM3_26";
 };
 
 &lsio_gpio1 {
@@ -586,15 +608,6 @@
 			  "MXM3_183",
 			  "MXM3_185",
 			  "MXM3_187";
-
-	pcie-wifi-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_WIFI_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio3 {
@@ -660,16 +673,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_SATA_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio5 {
@@ -771,9 +774,30 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio0 30 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_switch>;
+};
+
+/* On-module Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-/* TODO: On-module Wi-Fi */
+&phyx2_lpcg {
+	clocks = <&hsio_refa_clk>, <&hsio_refb_clk>,
+		 <&hsio_refa_clk>, <&hsio_per_clk>;
+};
 
 /* TODO: Apalis BKL1_PWM */
 
@@ -806,8 +830,6 @@
 			       <722534400>, <45158400>, <11289600>, <49152000>;
 };
 
-/* TODO: Apalis SATA1 */
-
 /* Apalis SPDIF1 */
 &spdif0 {
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 5f3b4014e152..b6d64d3906ea 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -642,7 +642,7 @@
 	status = "okay";
 };
 
-&pcieb {
+&pcie0 {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
@@ -652,6 +652,16 @@
 	status = "okay";
 };
 
+&pcie0_ep{
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &sai0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
index afbe962d78ce..bbc6abb0fdf2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -37,15 +37,20 @@
 		power-domains = <&pd IMX_SC_R_SERDES_1>;
 		status = "disabled";
 	};
-};
 
-&pcieb {
-	#interrupt-cells = <1>;
-	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "msi";
-	interrupt-map = <0 0 0 1 &gic 0 47 4>,
-			 <0 0 0 2 &gic 0 48 4>,
-			 <0 0 0 3 &gic 0 49 4>,
-			 <0 0 0 4 &gic 0 50 4>;
-	interrupt-map-mask = <0 0 0 0x7>;
+	pcie0: pcie@5f010000 {
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		interrupt-map = <0 0 0 1 &gic 0 47 4>,
+				<0 0 0 2 &gic 0 48 4>,
+				<0 0 0 3 &gic 0 49 4>,
+				<0 0 0 4 &gic 0 50 4>;
+		interrupt-map-mask = <0 0 0 0x7>;
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
new file mode 100644
index 000000000000..331787df2fe4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS on MB-SMARC-2";
+	compatible = "tq,imx8dxp-tqma8xdps-mb-smarc-2", "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
new file mode 100644
index 000000000000..a97286fe7e0d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS";
+	compatible = "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
+
+&pmic0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 97ff1ddd6318..734a75198f06 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 62ed64663f49..21bcd82fd092 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -78,6 +78,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -233,6 +236,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -269,7 +278,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -314,6 +323,7 @@
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -349,6 +359,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 5f8336217bb8..622caaa78eaf 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -544,6 +544,19 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "disabled";
+};
+
 &sai2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
index 840f83293452..e5ca5a664b61 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -186,6 +186,8 @@
 			reg = <2>;
 			bridge_out: endpoint {
 				remote-endpoint = <&panel_in>;
+				ti,lvds-vod-swing-clock-microvolt = <200000 600000>;
+				ti,lvds-vod-swing-data-microvolt = <200000 600000>;
 			};
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index cdfacbc35db5..190bde4edcd7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -306,7 +306,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index b46566f3ce20..1594ce9182a5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -464,6 +464,7 @@
 			};
 
 			reg_nvcc_sd: LDO5 {
+				regulator-always-on;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -541,7 +542,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -646,7 +647,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -654,7 +655,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 5c52974740f4..f3ab0eab7146 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1df5ceb11387..37fc5ed98d7f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 2a64115eebf1..67a99383a632 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -88,6 +88,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -242,6 +245,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -280,7 +289,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -325,6 +334,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -360,6 +370,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index bbb07c650da9..d20393c2d901 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -265,7 +265,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
 		pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b364307868f2..38ef9e4fdf07 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -300,7 +300,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index f50e42227f60..4ec64d433512 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index 15f7ab58db36..6a62cb32e22e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -257,6 +257,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -381,6 +387,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x1d0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a90e28c07e3f..7f754e0a5d69 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -590,7 +590,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 2AE */
+	brcmf: wifi@1 {	/* muRata 2AE */
 		reg = <1>;
 		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
 		/*
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c26954e5a605..1ba3018c621e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,6 +309,16 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -690,6 +700,10 @@
 	};
 };
 
+&mu2 {
+	status = "okay";
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	clocks = <&pcie0_refclk>;
@@ -697,7 +711,7 @@
 	status = "okay";
 };
 
-&pcie {
+&pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
@@ -705,6 +719,12 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
new file mode 100644
index 000000000000..1dcf249ca90d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm1 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel0_lvds {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..6f3a7b863dca
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-libra-rdk-fpsc",
+		     "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC i.MX8MP Libra RDK FPSC";
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		pinctrl-names = "default";
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	panel0_lvds: panel-lvds {
+		/* compatible panel in overlay */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can1-stby";
+		gpio = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can2-stby";
+		gpio = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+/* CAN FD */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "LVDS1_BL_EN", "SPI3_CS",
+			  "", "GPIO3";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;	/* default RS232/RS485 */
+		};
+
+		uart1_rs232_485_sel: rs232-485-hog {
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_RS232_485_SEL";
+			output-high;	/* default RS232 */
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23	0x12
+		>;
+	};
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25	0x1C0
+		>;
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel0_in>;
+			};
+		};
+	};
+};
+
+/* Mini PCIe */
+&pcie {
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&reg_vdd_io {
+	regulator-max-microvolt = <1800000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&rv3028 {
+	interrupt-parent = <&gpio5>;
+	interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	trickle-resistor-ohms = <3000>;
+	wakeup-source;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart4 {
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
new file mode 100644
index 000000000000..1df9488aaeb2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-som.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus ENC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-enc-carrier-board",
+			"boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usb_vbus: regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		line-name = "usb-hub-reset";
+		output-low;
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_i2c2_pca9546>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			rtc@52 {
+				compatible = "microcrystal,rv3028";
+				reg = <0x52>;
+				interrupts-extended = <&gpio1 4 IRQ_TYPE_LEVEL_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_rv3028>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	usb-mux@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupts-extended = <&gpio1 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_hd3ss3220>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x143
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x100
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x119
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x41
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x41
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x41
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x41
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x41
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x41
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x41
+		>;
+	};
+
+	pinctrl_i2c2_pca9546: i2c2-pca9546grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x100
+		>;
+	};
+
+	pinctrl_i2c4_hd3ss3220: i2c4-hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x03
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x100
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0xd6
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+		MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_usb_vbus: reg-usb-vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x100
+		>;
+	};
+
+	pinctrl_rv3028: rv3028grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT		0x116
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4
+		>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
new file mode 100644
index 000000000000..f658309612ef
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus Som";
+	compatible = "boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_bt>;
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	rfkill-wlan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_wlan>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 15 GPIO_OPEN_DRAIN>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3P3V (BUCK4)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1P8V (BUCK5)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1P1V (BUCK6)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8 (LDO3)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD1 (LDO5)";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 17 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 19 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 21 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x20
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0xa0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02				0x10
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x100
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x1c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x1c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x41
+		>;
+	};
+
+	pinctrl_rfkill_bt: rfkill-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x119
+		>;
+	};
+
+	pinctrl_rfkill_wlan: rfkill-wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x10
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x150
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x150
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x150
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x150
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x150
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x150
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x150
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x150
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x150
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x140
+
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x14
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x154
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x154
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x154
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x154
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x154
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x154
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x154
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x154
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x154
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x12
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x152
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x152
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x152
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x152
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x152
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x152
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x152
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x152
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x152
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..8b0e8cf86cad
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC phyCORE-i.MX8MP FPSC";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		 compatible = "regulator-fixed";
+		 off-on-delay-us = <12000>;
+		 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		 pinctrl-names = "default";
+		 regulator-max-microvolt = <3300000>;
+		 regulator-min-microvolt = <3300000>;
+		 regulator-name = "VDDSW_SD2";
+		 startup-delay-us = <100>;
+		 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		 enable-active-high;
+	 };
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_IO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+};
+
+&ecspi2 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+};
+
+&ecspi3 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-names = "default";
+};
+
+&eqos { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+};
+
+&fec { /* FPSC GB_ETH1 */
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "PCIE1_nPERST";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "SD2_RESET_B";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "I2C6_SCL",
+			  "I2C6_SDA", "I2C5_SCL";
+};
+
+&gpio4 { /* FPSC GPIO */
+	gpio-line-names = "GPIO6", "RGMII2_nINT", "GPIO7", "GPIO4", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "X_PMIC_IRQ_B", "",
+			  "", "GPIO5", "", "", "RGMII2_EVENT_OUT",
+			  "", "", "RGMII2_EVENT_IN";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	pinctrl-names = "default";
+};
+
+&gpio5 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "", "SPI3_CS",
+			  "", "GPIO3";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	pinctrl-names = "default";
+};
+
+&i2c1 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	/* factory EEPROM */
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 { /* FPSC I2C2 */
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* FPSC I2C3 */
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* FPSC I2C4 */
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c6 { /* FPSC I2C5 */
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX		0x154	/* CAN1_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX		0x154	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154	/* CAN2_TX */
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX		0x154	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01				0x10	/* RGMII2_nINT */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27				0x10	/* RGMII2_EVENT_IN */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24				0x10	/* RGMII2_EVENT_OUT */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2	/* RGMII2_MDIO */
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2	/* RGMII2_MDC */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12	/* RGMII2_TX_D3 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12	/* RGMII2_TX_D2 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12	/* RGMII2_TX_D1 */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12	/* RGMII2_TX_D0 */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x12	/* RGMII2_TX_CTL */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12	/* RGMII2_TXC */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90	/* RGMII2_RX_D3 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90	/* RGMII2_RX_D2 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90	/* RGMII2_RX_D1 */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90	/* RGMII2_RX_D0 */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90	/* RGMII2_RX_CTL */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x140
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82	/* QSPI_CE */
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2	/* QSPI_CLK */
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82	/* QSPI_DATA_0 */
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82	/* QSPI_DATA_1 */
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82	/* QSPI_DATA_2 */
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82	/* QSPI_DATA_3 */
+			MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106	/* GPIO5 */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x106	/* GPIO6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x106	/* GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x106	/* GPIO1 */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x106	/* GPIO2 */
+			MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26	0x106	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x106	/* HDMI_CEC */
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x106	/* HDMI_SCL */
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x106	/* HDMI_SDA */
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x106	/* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2	/* I2C1_SDA_DNU */
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2	/* I2C2_SDA */
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1e2
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1e2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2	/* I2C3_SDA */
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x1e2
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x1e2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c2	/* I2C4_SDA */
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c2	/* I2C4_SCL */
+		>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1e2
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1e2
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c2	/* I2C5_SDA */
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c2	/* I2C5_SCL */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x10	/* PCIE1_nCLKREQ */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x106	/* PWM1 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT	0x106	/* PWM2 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x106	/* PWM3 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x106	/* PWM4 */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19    0x40
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK	0x106	/* SAI1_MCLK */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC	0x106	/* SAI1_RX_SYNC */
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK	0x106	/* SAI1_RX_BCLK */
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00	0x106	/* SAI1_RX_DATA */
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x106	/* SAI1_TX_SYNC */
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x106	/* SAI1_TX_BCLK */
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00	0x106	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_ecspi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82	/* SPI1_SCLK */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82	/* SPI1_MOSI */
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82	/* SPI1_MISO */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x106	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82	/* SPI2_SCLK */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82	/* SPI2_MOSI */
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82	/* SPI2_MISO */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x106     /* SPI2_CS */
+		>;
+	};
+
+	pinctrl_ecspi3: spi3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK	0x82	/* SPI3_SCLK */
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI	0x82	/* SPI3_MOSI */
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO	0x82	/* SPI3_MISO */
+			MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24	0x106     /* SPI3_CS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX	0x140	/* UART2_RXD */
+			MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX	0x140	/* UART2_TXD */
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS	0x140	/* UART2_RTS */
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS	0x140	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX	0x140	/* UART1_RXD */
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX	0x140	/* UART1_TXD */
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS	0x140	/* UART1_RTS */
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS	0x140	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140	/* UART3_RXD */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x106	/* USB1_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x106	/* USB1_OC */
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x106	/* USB1_ID */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x106	/* USB2_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC	0x106	/* USB2_OC */
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID	0x106	/* USB2_ID */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP	0x106	/* SDIO_WP */
+			MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B	0x106	/* SDIO_CD */
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x106	/* SDIO_DATA0 */
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x106	/* SDIO_DATA1 */
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x106	/* SDIO_DATA2 */
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x106	/* SDIO_DATA3 */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
+
+&pcie { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pwm1 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&pwm2 { /* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+};
+
+&pwm3 { /* FPSC PWM3 */
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+};
+
+&pwm4 { /* FPSC PWM4 */
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+};
+
+&sai5 { /* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-names = "default";
+};
+
+&uart2 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart3 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart4 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+};
+
+&usb3_0 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usb0>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 { /* FPSC USB2 */
+	pinctrl-0 = <&pinctrl_usb1>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
new file mode 100644
index 000000000000..55b8c5c14fb4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx8mp-toradex-smarc.dtsi"
+
+/ {
+	model = "Toradex SMARC iMX8M Plus on Toradex SMARC Development Board";
+	compatible = "toradex,smarc-imx8mp-dev",
+		     "toradex,smarc-imx8mp",
+		     "fsl,imx8mp";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J64";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_carrier_1p8v: regulator-carrier-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier 1V8";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "tdx-smarc-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* SMARC GBE0 */
+&eqos {
+	status = "okay";
+};
+
+/* SMARC GBE1 */
+&fec {
+	status = "okay";
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio7>,
+		    <&pinctrl_gpio8>,
+		    <&pinctrl_gpio9>,
+		    <&pinctrl_gpio10>,
+		    <&pinctrl_gpio11>,
+		    <&pinctrl_gpio12>,
+		    <&pinctrl_gpio13>;
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pins 4/6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pins 52/54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>, <&pinctrl_sai1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_carrier_1p8v>;
+		CPVDD-supply = <&reg_carrier_1p8v>;
+		DBVDD-supply = <&reg_carrier_1p8v>;
+		DCVDD-supply = <&reg_carrier_1p8v>;
+		MICVDD-supply = <&reg_carrier_1p8v>;
+	};
+
+	/* On-Carrier Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* On-Carrier EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	status = "okay";
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* Fan controller */
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	/* Current measurement into module VDD */
+	hwmon@40 {
+		compatible = "ti,ina226";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* SMARC PCIE_A, M2 Key B */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	status = "okay";
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	status = "okay";
+};
+
+/* SMARC I2S0 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* SMARC HDMI Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* SMARC SER0, RS485. Optional M.2 KEY E */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* SMARC SER2 */
+&uart2 {
+	status = "okay";
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	status = "okay";
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	status = "okay";
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
new file mode 100644
index 000000000000..22f6daabdb90
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
@@ -0,0 +1,1314 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan2;
+		can1 = &flexcan1;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart4;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		label = "USB0";
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_0_dwc>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sleep>;
+
+		smarc_key_sleep: key-sleep {
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			label = "SMARC_SLEEP#";
+			wakeup-source;
+			linux,code = <KEY_SLEEP>;
+		};
+
+		smarc_switch_lid: switch-lid {
+			gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "SMARC_LID#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en_oc>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB0_EN_OC#";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_en_oc>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB2_EN_OC#";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3V3_SD";
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CTRL_EN_WIFI";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x40000000 0 0x80000000>;
+		};
+	};
+
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio4 28 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio4 3 GPIO_ACTIVE_LOW>,
+		   <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@2 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <2>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* SMARC GBE0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>,
+		    <&pinctrl_eth_mdio>,
+		    <&pinctrl_eqos_1588_event>;
+	phy-handle = <&eqos_phy>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* SMARC GBE1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_1588_event>;
+	phy-handle = <&fec_phy>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SMARC_GPIO7", /* 0 */
+			  "SMARC_GPIO8",
+			  "",
+			  "PMIC_INT#",
+			  "PMIC_USDHC_VSELECT",
+			  "SMARC_GPIO9",
+			  "SMARC_GPIO10",
+			  "SMARC_GPIO11",
+			  "SMARC_GPIO12",
+			  "",
+			  "SMARC_GPIO5", /* 10 */
+			  "",
+			  "SMARC_USB0_EN_OC#",
+			  "SMARC_GPIO13",
+			  "SMARC_USB2_EN_OC#";
+};
+
+&gpio2 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "SMARC_SDIO_CD#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SDIO_PWR_EN",
+			  "SMARC_SDIO_WP"; /* 20 */
+};
+
+&gpio3 {
+	gpio-line-names = "ETH_0_INT#", /* 0 */
+			  "SLEEP#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TPM_CS#",
+			  "LVDS_DSI_SEL",
+			  "MCU_INT#",
+			  "GPIO_EX_INT#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SMB_ALERT#",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_DAT", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_CK";
+
+	lvds_dsi_mux_hog: lvds-dsi-mux-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		line-name = "LVDS_DSI_SEL";
+		/* LVDS_DSI_SEL as DSI */
+		output-low;
+	};
+};
+
+&gpio4 {
+	gpio-line-names = "SMARC_PCIE_WAKE#", /* 0 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS1#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO4",
+			  "SMARC_PCIE_A_RST#",
+			  "", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS1#",
+			  "SMARC_GPIO6";
+};
+
+&gpio5 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "SMARC_USB0_OTG_ID",
+			  "SMARC_I2C_CAM1_CK",
+			  "SMARC_I2C_CAM1_DAT",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS0#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS0#",
+			  "CTRL_I2C_SCL",
+			  "CTRL_I2C_SDA",
+			  "SMARC_I2C_LCD_CK",
+			  "SMARC_I2C_LCD_DAT",
+			  "SMARC_I2C_CAM0_CK",
+			  "SMARC_I2C_CAM0_DAT",
+			  "SMARC_I2C_GP_CK", /* 20 */
+			  "SMARC_I2C_GP_DAT";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6408>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_GPIO0",
+			"SMARC_GPIO1",
+			"SMARC_GPIO2",
+			"SMARC_GPIO3",
+			"SMARC_LCD0_VDD_EN",
+			"SMARC_LCD0_BKLT_EN",
+			"SMARC_LCD1_VDD_EN",
+			"SMARC_LCD1_BKLT_EN";
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_SOC (PMIC BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_ARM (PMIC BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK4)";
+			};
+
+			reg_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "+V1.8_SNVS (PMIC LDO1)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_ADC (PMIC LDO4)";
+			};
+
+			reg_sd_3v3_1v8: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO5)";
+			};
+		};
+	};
+
+	embedded-controller@28 {
+		compatible = "toradex,smarc-imx8mp-ec", "toradex,smarc-ec";
+		reg = <0x28>;
+	};
+
+	som_ec_gpio_expander: gpio@29 {
+		compatible = "toradex,ecgpiol16", "nxp,pcal6416";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcu_int>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_CHARGER_PRSNT#",
+			"SMARC_CHARGING#",
+			"SMARC_LID#",
+			"SMARC_BATLOW#";
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+&mdio {
+	eqos_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	fec_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* SMARC PCIE_A */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd1_bklt_pwm1>;
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd0_bklt_pwm2>;
+};
+
+/* SMARC GPIO5 as PWM */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_pwm>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* SMARC SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SMARC SER2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* On-module Bluetooth, optional SMARC SER3 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	uart-has-rtscts;
+	status = "okay";
+
+	som_bt: bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	srp-disable;
+	usb-role-switch;
+
+	port {
+		usb3_0_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>,
+		    <&pinctrl_usdhc2_cd_sleep>,
+		    <&pinctrl_usdhc2_wp>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	/* On-module Bluetooth */
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x1c4>, /* WiFi_UART_TXD */
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x1c4>, /* WiFi_UART_RXD */
+			   <MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x1c4>, /* WiFi_UART_RTS */
+			   <MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x1c4>; /* WiFi_UART_CTS */
+	};
+
+	/* SMARC CAM_MCK */
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2	0x16>; /* SMARC S6 - CAM_MCK  */
+	};
+
+	/* SMARC SPI0 */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c4>, /* SMARC P45 - SPI0_DIN */
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x4>,   /* SMARC P46 - SPI0_DO */
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x4>,   /* SMARC P44 - SPI0_CK */
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>, /* SMARC P43 - SPI0_CS0# */
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>; /* SMARC P31 - SPI0_CS1# */
+	};
+
+	/* SMARC SPI1 */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c4>, /* SMARC P56 - SPI1_DIN */
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x4>,   /* SMARC P57 - SPI1_DO */
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x4>,   /* SMARC P58 - SPI1_CK */
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>, /* SMARC P54 - SPI1_CS0# */
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x1c4>; /* SMARC P55 - SPI1_CS1# */
+	};
+
+	/* ETH_0 RGMII (On-module PHY) */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>, /* ETH0_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>, /* ETH0_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>, /* ETH0_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>, /* ETH0_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>, /* ETH0_RGMII_RXC */
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>, /* ETH0_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16>, /* ETH0_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16>, /* ETH0_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16>, /* ETH0_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16>, /* ETH0_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16>, /* ETH0_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16>; /* ETH0_RGMII_TXC */
+	};
+
+	/* SMARC GBE0_SDP */
+	pinctrl_eqos_1588_event: eqos1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT	0x4>; /* SMARC P6 - GBE0_SDP */
+	};
+
+	/* ETH_0_MDIO and ETH_0_INT# shared between ETH_PHY0 and ETH_PHY1 */
+	pinctrl_eth_mdio: ethmdiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2>,  /* ETH_0_MDC */
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO	0x2>,  /* ETH_0_MDIO */
+			   <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x80>; /* ETH_0_INT# */
+	};
+
+	/* ETH_1 RGMII (On-module PHY) */
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>, /* ETH1_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>, /* ETH1_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>, /* ETH1_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>, /* ETH1_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>, /* ETH1_RGMII_RXC */
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>, /* ETH1_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16>, /* ETH1_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16>, /* ETH1_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16>, /* ETH1_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16>, /* ETH1_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16>, /* ETH1_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16>; /* ETH1_RGMII_TXC */
+	};
+
+	/* SMARC GBE1_SDP */
+	pinctrl_fec_1588_event: fec1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x4>; /* SMARC P5 - GBE1_SDP */
+	};
+
+	/* SMARC CAN1 */
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXC__CAN1_RX	0x154>, /* SMARC P146 - CAN1_RX */
+			   <MX8MP_IOMUXC_SAI2_RXC__CAN1_TX	0x154>; /* SMARC P145 - CAN1_TX */
+	};
+
+	/* SMARC CAN0 */
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX	0x154>, /* SMARC P144 - CAN0_RX */
+			   <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX	0x154>; /* SMARC P143 - CAN0_TX */
+	};
+
+	/* SMARC GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x144>; /* SMARC P112 - GPIO4 */
+	};
+
+	/* SMARC GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x144>; /* SMARC P113 - GPIO5 */
+	};
+
+	/* SMARC GPIO5 as PWM */
+	pinctrl_gpio5_pwm: gpio5pwmgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT	0x12>; /* SMARC P113 - PWM_OUT */
+	};
+
+	/* SMARC GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x144>; /* SMARC P114 - GPIO6 */
+	};
+
+	/* SMARC GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x144>; /* SMARC P115 - GPIO7 */
+	};
+
+	/* SMARC GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x144>; /* SMARC P116 - GPIO8 */
+	};
+
+	/* SMARC GPIO9 */
+	pinctrl_gpio9: gpio9grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x144>; /* SMARC P117 - GPIO9 */
+	};
+
+	/* SMARC GPIO10 */
+	pinctrl_gpio10: gpio10grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x144>; /* SMARC P118 - GPIO10 */
+	};
+
+	/* SMARC GPIO11 */
+	pinctrl_gpio11: gpio11grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x144>; /* SMARC P119 - GPIO11 */
+	};
+
+	/* SMARC GPIO12 */
+	pinctrl_gpio12: gpio12grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08	0x144>; /* SMARC S142 - GPIO12 */
+	};
+
+	/* SMARC GPIO13 */
+	pinctrl_gpio13: gpio13grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x144>; /* SMARC S123 - GPIO13 */
+	};
+
+	/* SMARC HDMI */
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c6>, /* SMARC P105 - HDMI_CTRL_CK */
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c6>, /* SMARC P106 - HDMI_CTRL_DAT */
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;      /* SMARC P104 - HDMI_HPD */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* On-module I2C as GPIOs */
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* SMARC I2C_LCD */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_LCD as GPIOs */
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_CAM0 */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_CAM0 as GPIOs */
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_GP */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_GP as GPIOs */
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_CAM1 */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_CAM1 as GPIOs */
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_PM */
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	/* SMARC I2C_PM as GPIOs */
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	pinctrl_lvds_dsi_sel: lvdsdsiselgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x104>; /* LVDS_DSI_SEL */
+	};
+
+	pinctrl_mcu_int: mcuintgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x1C0>; /* MCU_INT# */
+	};
+
+	/* SMARC LCD1_BKLT_PWM */
+	pinctrl_lcd1_bklt_pwm1: pwm1grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x12>; /* SMARC S122 - LCD1_BKLT_PWM */
+	};
+
+	/* SMARC LCD0_BKLT_PWM */
+	pinctrl_lcd0_bklt_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x12>; /* SMARC S141 - LCD0_BKLT_PWM */
+	};
+
+	/* PCAL6408 Interrupt */
+	pinctrl_pcal6408: pcal6408intgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x1c4>; /* GPIO_EX_INT# */
+	};
+
+	/* SMARC PCIE_A */
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x1c0>, /* SMARC S146 - PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x04>;  /* SMARC P75 - PCIE_A_RST# */
+	};
+
+	/* PMIC Interrupt */
+	pinctrl_pmic: pmicintgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c4>; /* PMIC_INT# */
+	};
+
+	/* SMARC I2S0 */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0x94>, /* SMARC S42 - I2S0_CK */
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0x94>, /* SMARC S39 - I2S0_LRCLK */
+			   <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x94>, /* SMARC S41 - I2S0_SDIN */
+			   <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x94>; /* SMARC S40 - I2S0_SDOUT */
+	};
+
+	/* SMARC AUDIO_MCK */
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0x96>; /* SMARC S38 - AUDIO_MCK */
+	};
+
+	/* SMARC I2S2 */
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94>, /* SMARC S52 - I2S2_SDIN */
+			   <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94>, /* SMARC S53 - I2S2_CK */
+			   <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94>, /* SMARC S51 - I2S2_SDOUT */
+			   <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94>; /* SMARC S50 - I2S2_LRCLK */
+	};
+
+	/* SMARC SLEEP# */
+	pinctrl_sleep: sleepgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x1C0>; /* SMARC S149 - SLEEP# */
+	};
+
+	/* SMARC SMB_ALERT# */
+	pinctrl_smb_alert: smbalertgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x1C0>; /* SMARC P1 - SMB_ALERT# */
+	};
+
+	/* TPM_CS# */
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x82>; /* TPM_CS# */
+	};
+
+	/* WIFI_BT_WKUP_HOST/TPM_INT# */
+	pinctrl_tpm_irq_wifi_bt_wkup: tpmirq-wifibtwkupgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x16>; /* WIFI_BT_WKUP_HOST/TPM_INT# */
+	};
+
+	/* SMARC SER0 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x1c4>, /* SMARC P132 - SER2_CTS */
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x1c4>, /* SMARC P131 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x1c4>, /* SMARC P130 - SER2_RX */
+			   <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x1c4>; /* SMARC P139 - SER2_TX */
+	};
+
+	/* SMARC SER2 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS	0x1c4>, /* SMARC P139 - SER2_CTS */
+			   <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x1c4>, /* SMARC P138 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x1c4>, /* SMARC P137 - SER2_RX */
+			   <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x1c4>; /* SMARC P136 - SER2_TX */
+	};
+
+	/* SMARC SER3 */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x1c4>, /* SMARC P141 - SER3_RX */
+			   <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x1c4>; /* SMARC P140 - SER3_TX */
+	};
+
+	/* SMARC SER1 */
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x1c4>, /* SMARC P135 - SER1_RX */
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x1c4>; /* SMARC P134 - SER1_TX */
+	};
+
+	/* SMARC USB0_OTG_ID */
+	pinctrl_usb0_id: usb0idgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x1c4>; /* SMARC P64 - USB0_OTG_ID */
+	};
+
+	/* SMARC USB0_EN_OC# */
+	pinctrl_usb0_en_oc: usb0enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x04>; /* SMARC P62 - USB0_EN_OC# */
+	};
+
+	/* On module USB Hub VBUS, or SMARC USB2_EN_OC# depending on assembling */
+	pinctrl_usb1_en_oc: usb1enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x04>; /* SMARC P71 - USB2_EN_OC# */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 100MHz */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 200MHz */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x0>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_PWR_EN */
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1c4>; /* SMARC P37 - SDIO_PWR_EN */
+	};
+
+	/* SMARC SDIO Sleep - Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x100>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x100>, /* SMARC P39 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x100>, /* SMARC P39 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x100>; /* SMARC P39 - SDIO_D3 */
+	};
+
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x4>; /* PMIC_USDHC_VSELECT */
+	};
+
+	/* SMARC SDIO_WP */
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20	0x144>; /* SMARC P33 - SDIO_WP */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>; /* eMMC_CMD */
+	};
+
+	/* SoC Watchdog */
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x4>; /* CTRL_SOC_WDOG */
+	};
+
+	/* On-module Wi-Fi power enable */
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x104>; /* CTRL_EN_WIFI */
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
new file mode 100644
index 000000000000..e5a2b3780215
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	/*
+	 * The three camera regulators are controlled by a single GPIO. Declare
+	 * a single regulator for the three supplies.
+	 */
+	reg_cam: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		/* pad muxing already done in gpio2grp */
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	cam24m: clock-cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VANA-supply = <&reg_cam>;
+		VDIG-supply = <&reg_cam>;
+		VDDL-supply = <&reg_cam>;
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			sony_imx219: endpoint {
+				remote-endpoint = <&imx8mp_mipi_csi_in>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "disabled";
+
+	ports {
+		port@0 {
+			/delete-node/ endpoint;
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			isp0_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				remote-endpoint = <&mipi_csi_0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			imx8mp_mipi_csi_in: endpoint {
+				remote-endpoint = <&sony_imx219>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0_out {
+	remote-endpoint = <&isp0_in>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index 2f740d74707b..4bf818873fe3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -70,7 +70,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index 5ab3ffe9931d..cf747ec6fa16 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -110,7 +110,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index e2b5e7ac3e46..5eb114d2360a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -122,7 +122,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 6daa2313f879..568d24265ddf 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -201,7 +201,7 @@
 	tpm@0 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index e3869efe4fd0..d43ba0087126 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -657,7 +657,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -770,7 +770,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -778,7 +778,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index ca298186b97b..56842db01fa3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interconnect/fsl,imx8mp.h>
@@ -65,7 +66,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -86,7 +86,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -105,7 +104,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -124,7 +122,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -280,7 +277,7 @@
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
 			status = "disabled";
 		};
@@ -1252,6 +1249,7 @@
 				reg = <0x30e60000 0x10000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				#mbox-cells = <2>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
 				status = "disabled";
 			};
 
@@ -2161,7 +2159,7 @@
 			};
 		};
 
-		pcie: pcie@33800000 {
+		pcie0: pcie: pcie@33800000 {
 			compatible = "fsl,imx8mp-pcie";
 			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -2199,7 +2197,7 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@33800000 {
+		pcie0_ep: pcie_ep: pcie-ep@33800000 {
 			compatible = "fsl,imx8mp-pcie-ep";
 			reg = <0x33800000 0x100000>,
 			      <0x18000000 0x8000000>,
@@ -2421,13 +2419,19 @@
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
-			memory-region = <&dsp_reserved>;
+			clocks = <&audio_blk_ctrl  IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+			clock-names = "ipg", "ocram", "core", "debug";
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "/*(DEBLOBBED)*/";
+			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+			reset-names = "runstall";
 			status = "disabled";
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index a87d0692c3bb..43e45b0bd0d1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -377,6 +377,16 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
@@ -390,6 +400,16 @@
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "disabled";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2c4843d35cc4..0230d4f4d512 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -106,7 +106,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -126,7 +125,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -144,7 +142,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -162,7 +159,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -1774,6 +1770,41 @@
 			status = "disabled";
 		};
 
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			fsl,max-link-speed = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@33c00000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33c00000 0x400000>,
@@ -1828,6 +1859,7 @@
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
 			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
index c18f57039f6e..f97feee52c81 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -22,6 +22,10 @@
 	phy-mode = "rgmii-rxid";
 };
 
+&hsio_refa_clk {
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
 /* Apalis I2C2 (DDC) */
@@ -188,12 +192,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		gpios = <27 GPIO_ACTIVE_HIGH>;
-	};
-
 };
 
 &lsio_gpio5 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index e80f722dbe65..50c0f6b0f0bd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -12,7 +12,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	pciea: pcie@5f000000 {
+	pcie0: pciea: pcie@5f000000 {
 		compatible = "fsl,imx8q-pcie";
 		reg = <0x5f000000 0x10000>,
 		      <0x4ff00000 0x80000>;
@@ -42,7 +42,7 @@
 		status = "disabled";
 	};
 
-	pciea_ep: pcie-ep@5f000000 {
+	pcie0_ep: pciea_ep: pcie-ep@5f000000 {
 		compatible = "fsl,imx8q-pcie-ep";
 		reg = <0x5f000000 0x00010000>,
 		      <0x40000000 0x10000000>;
@@ -61,7 +61,7 @@
 		status = "disabled";
 	};
 
-	pcieb: pcie@5f010000 {
+	pcie1: pcieb: pcie@5f010000 {
 		compatible = "fsl,imx8q-pcie";
 		reg = <0x5f010000 0x10000>,
 		      <0x8ff00000 0x80000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek-pcie-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek-pcie-ep.dtso
deleted file mode 100644
index 4f562eb5c5b1..000000000000
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek-pcie-ep.dtso
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2025 NXP
- */
-
-#include <dt-bindings/phy/phy.h>
-
-/dts-v1/;
-/plugin/;
-
-&pcieb {
-	status = "disabled";
-};
-
-&pcieb_ep {
-	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
-	phy-names = "pcie-phy";
-	pinctrl-0 = <&pinctrl_pcieb>;
-	pinctrl-names = "default";
-	vpcie-supply = <&reg_pcieb>;
-	status = "okay";
-};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index a669a5d500d3..c93d123670bd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -40,24 +40,6 @@
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
-	reserved-memory {
-		dsp_vdev0vring0: memory@942f0000 {
-			reg = <0 0x942f0000 0 0x8000>;
-			no-map;
-		};
-
-		dsp_vdev0vring1: memory@942f8000 {
-			reg = <0 0x942f8000 0 0x8000>;
-			no-map;
-		};
-
-		dsp_vdev0buffer: memory@94300000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x94300000 0 0x100000>;
-			no-map;
-		};
-	};
-
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -189,6 +171,22 @@
 			no-map;
 		};
 
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
 		gpu_reserved: memory@880000000 {
 			no-map;
 			reg = <0x8 0x80000000 0 0x10000000>;
@@ -539,7 +537,7 @@
 	status = "okay";
 };
 
-&pcieb {
+&pcie0 {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
@@ -549,6 +547,15 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &scu_key {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
index 47fc6e0cff4a..255b8c91c88c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
@@ -38,4 +38,10 @@
 		power-domains = <&pd IMX_SC_R_SERDES_1>;
 		status = "disabled";
 	};
+
+	pcie0: pcie@5f010000 {
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
new file mode 100644
index 000000000000..3fa9b5aee2c3
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS on MB-SMARC-2";
+	compatible = "tq,imx8qxp-tqma8xqps-mb-smarc-2", "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
new file mode 100644
index 000000000000..f008b7a34505
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS";
+	compatible = "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index ecb35c6b67f5..e602d147e39b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -52,6 +52,15 @@
 		regulator-name = "vref-1v8";
 	};
 
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio_expander_43 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "Wi-Fi_PDn";
+		startup-delay-us = <2000>;
+	};
+
 	reg_usbh_vbus: regulator-usbh-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -261,6 +270,16 @@
 	};
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refb_clk {
+	enable-gpios = <&gpio_expander_43 3 GPIO_ACTIVE_HIGH>;
+};
+
 /* Colibri SPI */
 &lpspi2 {
 	pinctrl-names = "default";
@@ -454,7 +473,15 @@
 
 /* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
 
-/* TODO on-module PCIe for Wi-Fi */
+/* On-module PCIe for Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
 /* On-module I2S */
 &sai0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
new file mode 100644
index 000000000000..7e9d031a2f0e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx93-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash-i.MX93";
+	compatible = "phytec,imx93-phyboard-nash", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VCC_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* RTC */
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		trickle-resistor-ohms = <3000>;
+		wakeup-source;
+	};
+
+	/* EEPROM */
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_1v8>;
+	};
+};
+
+/* SPI6 */
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* TPM */
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS-232/RS-485 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0	0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1	0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2	0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3	0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0	0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1	0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2	0x50e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3	0x50e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1002
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x1382
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__GPIO2_IO00		0x386
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x386
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x386
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO17__GPIO2_IO17		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__LPUART7_TX		0x30e
+			MX93_PAD_GPIO_IO09__LPUART7_RX		0x31e
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B	0x31e
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000178e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001386
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001386
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001386
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013be
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 85fb188b057f..0c55b749c834 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -17,10 +17,38 @@
 	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
 		     "fsl,imx93";
 
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
 
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -31,6 +59,93 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SD";
 	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0022.1561";
+		reg = <2>;
+		clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	/* RTC */
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 
 /* Console */
@@ -40,9 +155,28 @@
 	status = "okay";
 };
 
-/* eMMC */
-&usdhc1 {
-	no-1-8-v;
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* USB  */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
 };
 
 /* SD-Card */
@@ -53,6 +187,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	bus-width = <4>;
 	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	no-mmc;
 	no-sdio;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
@@ -60,10 +195,36 @@
 };
 
 &iomuxc {
-	pinctrl_uart1: uart1grp {
+	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
-			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
-			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+			MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000050e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x50e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
 		>;
 	};
 
@@ -73,45 +234,71 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x1402
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x1402
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
 	pinctrl_usdhc2_cd: usdhc2cdgrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2_default: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x179e
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp {
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK            0x179e
-			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x138e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x138e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp {
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK            0x178e
-			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x139e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x139e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index 88c2657b50e6..22dbcc89e311 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -72,12 +72,107 @@
 	};
 };
 
+/* I2C3 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDDQ_0V6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3_BUCK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "VDD_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "PMIC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+};
+
 /* eMMC */
 &usdhc1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -104,22 +199,70 @@
 
 	pinctrl_leds: ledsgrp {
 		fsl,pins = <
-			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
 		>;
 	};
 
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD3__GPIO4_IO27		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x1386
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x1386
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x1386
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x1386
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x1386
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x1386
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x1386
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000139e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013be
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013be
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013be
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013be
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013be
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013be
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
 		>;
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
new file mode 100644
index 000000000000..9dbf41cf394b
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -0,0 +1,749 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba91xxca", "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDC__ENET_QOS_MDC				0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC			0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX93_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00	0x31e>,
+			   <MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01	0x31e>,
+			   <MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02	0x31e>,
+			   <MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03	0x31e>,
+			   <MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04	0x31e>,
+			   <MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05	0x31e>,
+			   <MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06	0x31e>,
+			   <MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07	0x31e>,
+			   <MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08	0x31e>,
+			   <MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09	0x31e>,
+			   <MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX93_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SD2_CD_B__GPIO3_IO00		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index ebbac5f8d2b2..137b8ed242a2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -627,8 +627,8 @@
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
-			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000191e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
@@ -659,8 +659,8 @@
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
-			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000191e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
 			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 9e88c42c3d17..219f49a4f87f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -597,8 +597,8 @@
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
-			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000191e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
@@ -629,8 +629,8 @@
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
-			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000191e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
 			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx94-clock.h linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-clock.h
new file mode 100644
index 000000000000..27e8c0839722
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-clock.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_CLOCK_H
+#define __IMX94_CLOCK_H
+
+#define IMX94_CLK_EXT				0
+#define IMX94_CLK_32K				1
+#define IMX94_CLK_24M				2
+#define IMX94_CLK_FRO				3
+#define IMX94_CLK_SYSPLL1_VCO			4
+#define IMX94_CLK_SYSPLL1_PFD0_UNGATED		5
+#define IMX94_CLK_SYSPLL1_PFD0			6
+#define IMX94_CLK_SYSPLL1_PFD0_DIV2		7
+#define IMX94_CLK_SYSPLL1_PFD1_UNGATED		8
+#define IMX94_CLK_SYSPLL1_PFD1			9
+#define IMX94_CLK_SYSPLL1_PFD1_DIV2		10
+#define IMX94_CLK_SYSPLL1_PFD2_UNGATED		11
+#define IMX94_CLK_SYSPLL1_PFD2			12
+#define IMX94_CLK_SYSPLL1_PFD2_DIV2		13
+#define IMX94_CLK_AUDIOPLL1_VCO			14
+#define IMX94_CLK_AUDIOPLL1			15
+#define IMX94_CLK_AUDIOPLL2_VCO			16
+#define IMX94_CLK_AUDIOPLL2			17
+#define IMX94_CLK_RESERVED18			18
+#define IMX94_CLK_RESERVED19			19
+#define IMX94_CLK_RESERVED20			20
+#define IMX94_CLK_RESERVED21			21
+#define IMX94_CLK_RESERVED22			22
+#define IMX94_CLK_RESERVED23			23
+#define IMX94_CLK_ENCPLL_VCO			24
+#define IMX94_CLK_ENCPLL_PFD0_UNGATED		25
+#define IMX94_CLK_ENCPLL_PFD0			26
+#define IMX94_CLK_ENCPLL_PFD1_UNGATED		27
+#define IMX94_CLK_ENCPLL_PFD1			28
+#define IMX94_CLK_ARMPLL_VCO			29
+#define IMX94_CLK_ARMPLL_PFD0_UNGATED		30
+#define IMX94_CLK_ARMPLL_PFD0			31
+#define IMX94_CLK_ARMPLL_PFD1_UNGATED		32
+#define IMX94_CLK_ARMPLL_PFD1			33
+#define IMX94_CLK_ARMPLL_PFD2_UNGATED		34
+#define IMX94_CLK_ARMPLL_PFD2			35
+#define IMX94_CLK_ARMPLL_PFD3_UNGATED		36
+#define IMX94_CLK_ARMPLL_PFD3			37
+#define IMX94_CLK_DRAMPLL_VCO			38
+#define IMX94_CLK_DRAMPLL			39
+#define IMX94_CLK_HSIOPLL_VCO			40
+#define IMX94_CLK_HSIOPLL			41
+#define IMX94_CLK_LDBPLL_VCO			42
+#define IMX94_CLK_LDBPLL			43
+#define IMX94_CLK_EXT1				44
+#define IMX94_CLK_EXT2				45
+#define IMX94_CLK_ADC				46
+#define IMX94_CLK_BUSAON			47
+#define IMX94_CLK_CAN1				48
+#define IMX94_CLK_GLITCHFILTER			49
+#define IMX94_CLK_GPT1				50
+#define IMX94_CLK_I3C1SLOW			51
+#define IMX94_CLK_LPI2C1			52
+#define IMX94_CLK_LPI2C2			53
+#define IMX94_CLK_LPSPI1			54
+#define IMX94_CLK_LPSPI2			55
+#define IMX94_CLK_LPTMR1			56
+#define IMX94_CLK_LPUART1			57
+#define IMX94_CLK_LPUART2			58
+#define IMX94_CLK_M33				59
+#define IMX94_CLK_M33SYSTICK			60
+#define IMX94_CLK_PDM				61
+#define IMX94_CLK_SAI1				62
+#define IMX94_CLK_TPM2				63
+#define IMX94_CLK_A55				64
+#define IMX94_CLK_A55MTRBUS			65
+#define IMX94_CLK_A55PERIPH			66
+#define IMX94_CLK_DRAMALT			67
+#define IMX94_CLK_DRAMAPB			68
+#define IMX94_CLK_DISPAPB			69
+#define IMX94_CLK_DISPAXI			70
+#define IMX94_CLK_DISPPIX			71
+#define IMX94_CLK_HSIOACSCAN480M		72
+#define IMX94_CLK_HSIOACSCAN80M			73
+#define IMX94_CLK_HSIO				74
+#define IMX94_CLK_HSIOPCIEAUX			75
+#define IMX94_CLK_HSIOPCIETEST160M		76
+#define IMX94_CLK_HSIOPCIETEST400M		77
+#define IMX94_CLK_HSIOPCIETEST500M		78
+#define IMX94_CLK_HSIOPCIETEST50M		79
+#define IMX94_CLK_HSIOUSBTEST60M		80
+#define IMX94_CLK_BUSM70			81
+#define IMX94_CLK_M70				82
+#define IMX94_CLK_M70SYSTICK			83
+#define IMX94_CLK_BUSM71			84
+#define IMX94_CLK_M71				85
+#define IMX94_CLK_M71SYSTICK			86
+#define IMX94_CLK_BUSNETCMIX			87
+#define IMX94_CLK_ECAT				88
+#define IMX94_CLK_ENET				89
+#define IMX94_CLK_ENETPHYTEST200M		90
+#define IMX94_CLK_ENETPHYTEST500M		91
+#define IMX94_CLK_ENETPHYTEST667M		92
+#define IMX94_CLK_ENETREF			93
+#define IMX94_CLK_ENETTIMER1			94
+#define IMX94_CLK_ENETTIMER2			95
+#define IMX94_CLK_ENETTIMER3			96
+#define IMX94_CLK_FLEXIO3			97
+#define IMX94_CLK_FLEXIO4			98
+#define IMX94_CLK_M33SYNC			99
+#define IMX94_CLK_M33SYNCSYSTICK		100
+#define IMX94_CLK_MAC0				101
+#define IMX94_CLK_MAC1				102
+#define IMX94_CLK_MAC2				103
+#define IMX94_CLK_MAC3				104
+#define IMX94_CLK_MAC4				105
+#define IMX94_CLK_MAC5				106
+#define IMX94_CLK_NOCAPB			107
+#define IMX94_CLK_NOC				108
+#define IMX94_CLK_NPUAPB			109
+#define IMX94_CLK_NPU				110
+#define IMX94_CLK_CCMCKO1			111
+#define IMX94_CLK_CCMCKO2			112
+#define IMX94_CLK_CCMCKO3			113
+#define IMX94_CLK_CCMCKO4			114
+#define IMX94_CLK_BISS				115
+#define IMX94_CLK_BUSWAKEUP			116
+#define IMX94_CLK_CAN2				117
+#define IMX94_CLK_CAN3				118
+#define IMX94_CLK_CAN4				119
+#define IMX94_CLK_CAN5				120
+#define IMX94_CLK_ENDAT21			121
+#define IMX94_CLK_ENDAT22			122
+#define IMX94_CLK_ENDAT31FAST			123
+#define IMX94_CLK_ENDAT31SLOW			124
+#define IMX94_CLK_FLEXIO1			125
+#define IMX94_CLK_FLEXIO2			126
+#define IMX94_CLK_GPT2				127
+#define IMX94_CLK_GPT3				128
+#define IMX94_CLK_GPT4				129
+#define IMX94_CLK_HIPERFACE1			130
+#define IMX94_CLK_HIPERFACE1SYNC		131
+#define IMX94_CLK_HIPERFACE2			132
+#define IMX94_CLK_HIPERFACE2SYNC		133
+#define IMX94_CLK_I3C2SLOW			134
+#define IMX94_CLK_LPI2C3			135
+#define IMX94_CLK_LPI2C4			136
+#define IMX94_CLK_LPI2C5			137
+#define IMX94_CLK_LPI2C6			138
+#define IMX94_CLK_LPI2C7			139
+#define IMX94_CLK_LPI2C8			140
+#define IMX94_CLK_LPSPI3			141
+#define IMX94_CLK_LPSPI4			142
+#define IMX94_CLK_LPSPI5			143
+#define IMX94_CLK_LPSPI6			144
+#define IMX94_CLK_LPSPI7			145
+#define IMX94_CLK_LPSPI8			146
+#define IMX94_CLK_LPTMR2			147
+#define IMX94_CLK_LPUART10			148
+#define IMX94_CLK_LPUART11			149
+#define IMX94_CLK_LPUART12			150
+#define IMX94_CLK_LPUART3			151
+#define IMX94_CLK_LPUART4			152
+#define IMX94_CLK_LPUART5			153
+#define IMX94_CLK_LPUART6			154
+#define IMX94_CLK_LPUART7			155
+#define IMX94_CLK_LPUART8			156
+#define IMX94_CLK_LPUART9			157
+#define IMX94_CLK_SAI2				158
+#define IMX94_CLK_SAI3				159
+#define IMX94_CLK_SAI4				160
+#define IMX94_CLK_SWOTRACE			161
+#define IMX94_CLK_TPM4				162
+#define IMX94_CLK_TPM5				163
+#define IMX94_CLK_TPM6				164
+#define IMX94_CLK_USBPHYBURUNIN			165
+#define IMX94_CLK_USDHC1			166
+#define IMX94_CLK_USDHC2			167
+#define IMX94_CLK_USDHC3			168
+#define IMX94_CLK_V2XPK				169
+#define IMX94_CLK_WAKEUPAXI			170
+#define IMX94_CLK_XSPISLVROOT			171
+#define IMX94_CLK_XSPI1				172
+#define IMX94_CLK_XSPI2				173
+#define IMX94_CLK_SEL_EXT			174
+#define IMX94_CLK_SEL_A55C0			175
+#define IMX94_CLK_SEL_A55C1			176
+#define IMX94_CLK_SEL_A55C2			177
+#define IMX94_CLK_SEL_A55C3			178
+#define IMX94_CLK_SEL_A55P			179
+#define IMX94_CLK_SEL_DRAM			180
+#define IMX94_CLK_SEL_TEMPSENSE			181
+#define IMX94_CLK_NPU_CGC			182
+
+#endif /* __IMX94_CLOCK_H */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx94-pinfunc.h linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
new file mode 100644
index 000000000000..00255db89185
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
@@ -0,0 +1,1570 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __DTS_IMX94_PINFUNC_H
+#define __DTS_IMX94_PINFUNC_H
+
+/* Drive Strength */
+#define IMX94_DSE_X1		0x2
+#define IMX94_DSE_X2		0x6
+#define IMX94_DSE_X3		0xe
+#define IMX94_DSE_X4		0x1e
+#define IMX94_DSE_X5		0x3e
+#define IMX94_DSE_X6		0x7e
+
+/* Slew Rate */
+#define IMX94_FSEL_FAST		0x180
+#define IMX94_FSEL_SLOW		0x100
+
+/* Pull Up */
+#define IMX94_PU_ENABLE		0x200
+#define IMX94_PU_DISABLE	0x0
+
+/* Pull Down */
+#define IMX94_PD_ENABLE		0x400
+#define IMX94_PD_DISABLE	0x0
+
+/* Open Drain */
+#define IMX94_OD_ENABLE		0x800
+#define IMX94_OD_DISABLE	0x0
+
+/* Schmitt trigger */
+#define IMX94_HYS_SCHMITT	0x1000
+#define IMX94_HYS_NO_SCHMITT	0x0
+
+/*
+ * The pin function ID is a tuple of <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX94_PAD_DAP_TDI__JTAG_MUX_TDI                     0x0000 0x0304 0x092c 0x00 0x00
+#define IMX94_PAD_DAP_TDI__MQS2_LEFT                        0x0000 0x0304 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDI__ECAT_LED_ERR                     0x0000 0x0304 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDI__CAN2_TX                          0x0000 0x0304 0x0000 0x03 0x00
+#define IMX94_PAD_DAP_TDI__SINC_FILTER_GLUE3_BREAK          0x0000 0x0304 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDI__GPIO4_IO4                        0x0000 0x0304 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDI__LPUART5_RX                       0x0000 0x0304 0x07bc 0x06 0x00
+#define IMX94_PAD_DAP_TDI__XBAR1_XBAR_INOUT26               0x0000 0x0304 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS               0x0004 0x0308 0x0930 0x00 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__CAN5_TX                    0x0004 0x0308 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPT_MUX_INOUT10            0x0004 0x0308 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART8_TX                 0x0004 0x0308 0x07dc 0x03 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__SINC3_MOD_CLK1             0x0004 0x0308 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPIO4_IO5                  0x0004 0x0308 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B              0x0004 0x0308 0x0000 0x06 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__XBAR1_XBAR_INOUT27         0x0004 0x0308 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK              0x0008 0x030c 0x0928 0x00 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__CAN5_RX                   0x0008 0x030c 0x0688 0x01 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPT_MUX_INOUT11           0x0008 0x030c 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART8_RX                0x0008 0x030c 0x07d8 0x03 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__SINC3_MOD_CLK0            0x0008 0x030c 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPIO4_IO6                 0x0008 0x030c 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B             0x0008 0x030c 0x07b8 0x06 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__XBAR1_XBAR_INOUT28        0x0008 0x030c 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO            0x000c 0x0310 0x0000 0x00 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT              0x000c 0x0310 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__ECAT_RESET_OUT          0x000c 0x0310 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__CAN2_RX                 0x000c 0x0310 0x067c 0x03 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__SINC3_MOD_CLK2          0x000c 0x0310 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__GPIO4_IO7               0x000c 0x0310 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__LPUART5_TX              0x000c 0x0310 0x07c0 0x06 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__XBAR1_XBAR_INOUT29      0x000c 0x0310 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO00__GPIO2_IO0                      0x0010 0x0314 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR                       0x0010 0x0314 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO00__XBAR1_XBAR_INOUT39             0x0010 0x0314 0x08d4 0x02 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR_B                     0x0010 0x0314 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO00__LPSPI6_PCS0                    0x0010 0x0314 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO00__LPUART5_TX                     0x0010 0x0314 0x07c0 0x05 0x01
+#define IMX94_PAD_GPIO_IO00__LPI2C5_SDA                     0x0010 0x0314 0x0740 0x06 0x00
+#define IMX94_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                0x0010 0x0314 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO01__GPIO2_IO1                      0x0014 0x0318 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO01__I3C2_SCL                       0x0014 0x0318 0x0720 0x01 0x00
+#define IMX94_PAD_GPIO_IO01__XBAR1_XBAR_INOUT40             0x0014 0x0318 0x08d8 0x02 0x00
+#define IMX94_PAD_GPIO_IO01__EWM_OUT_B                      0x0014 0x0318 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO01__LPSPI6_SIN                     0x0014 0x0318 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO01__LPUART5_RX                     0x0014 0x0318 0x07bc 0x05 0x01
+#define IMX94_PAD_GPIO_IO01__LPI2C5_SCL                     0x0014 0x0318 0x073c 0x06 0x00
+#define IMX94_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                0x0014 0x0318 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO02__GPIO2_IO2                      0x0018 0x031c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO02__I3C2_SDA                       0x0018 0x031c 0x0724 0x01 0x00
+#define IMX94_PAD_GPIO_IO02__XBAR1_XBAR_INOUT41             0x0018 0x031c 0x08dc 0x02 0x00
+#define IMX94_PAD_GPIO_IO02__GPT_MUX_INOUT1                 0x0018 0x031c 0x0700 0x03 0x00
+#define IMX94_PAD_GPIO_IO02__LPSPI6_SOUT                    0x0018 0x031c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO02__LPUART5_CTS_B                  0x0018 0x031c 0x07b8 0x05 0x01
+#define IMX94_PAD_GPIO_IO02__LPI2C6_SDA                     0x0018 0x031c 0x074c 0x06 0x00
+#define IMX94_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                0x0018 0x031c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO03__GPIO2_IO3                      0x001c 0x0320 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO03__EWM_OUT_B                      0x001c 0x0320 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO03__XBAR1_XBAR_INOUT42             0x001c 0x0320 0x08e0 0x02 0x00
+#define IMX94_PAD_GPIO_IO03__GPT_MUX_INOUT4                 0x001c 0x0320 0x0708 0x03 0x00
+#define IMX94_PAD_GPIO_IO03__LPSPI6_SCK                     0x001c 0x0320 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO03__LPUART5_RTS_B                  0x001c 0x0320 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO03__LPI2C6_SCL                     0x001c 0x0320 0x0748 0x06 0x00
+#define IMX94_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                0x001c 0x0320 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO04__GPIO2_IO4                      0x0020 0x0324 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO04__TPM3_CH0                       0x0020 0x0324 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO04__PDM_CLK                        0x0020 0x0324 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO04__GPT_MUX_INOUT5                 0x0020 0x0324 0x070c 0x03 0x00
+#define IMX94_PAD_GPIO_IO04__LPSPI7_PCS0                    0x0020 0x0324 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO04__LPUART6_TX                     0x0020 0x0324 0x07cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO04__LPI2C6_SDA                     0x0020 0x0324 0x074c 0x06 0x01
+#define IMX94_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                0x0020 0x0324 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO05__GPIO2_IO5                      0x0024 0x0328 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO05__TPM4_CH0                       0x0024 0x0328 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO05__PDM_BIT_STREAM0                0x0024 0x0328 0x0610 0x02 0x00
+#define IMX94_PAD_GPIO_IO05__GPT_MUX_INOUT7                 0x0024 0x0328 0x0714 0x03 0x00
+#define IMX94_PAD_GPIO_IO05__LPSPI7_SIN                     0x0024 0x0328 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO05__LPUART6_RX                     0x0024 0x0328 0x07c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO05__LPI2C6_SCL                     0x0024 0x0328 0x0748 0x06 0x01
+#define IMX94_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                0x0024 0x0328 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO06__GPIO2_IO6                      0x0028 0x032c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO06__TPM5_CH0                       0x0028 0x032c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO06__PDM_BIT_STREAM1                0x0028 0x032c 0x0614 0x02 0x00
+#define IMX94_PAD_GPIO_IO06__GPT_MUX_INOUT8                 0x0028 0x032c 0x0718 0x03 0x00
+#define IMX94_PAD_GPIO_IO06__LPSPI7_SOUT                    0x0028 0x032c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO06__LPUART6_CTS_B                  0x0028 0x032c 0x07c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO06__LPI2C7_SDA                     0x0028 0x032c 0x0754 0x06 0x00
+#define IMX94_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                0x0028 0x032c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO07__GPIO2_IO7                      0x002c 0x0330 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI3_PCS1                    0x002c 0x0330 0x0768 0x01 0x00
+#define IMX94_PAD_GPIO_IO07__XBAR1_XBAR_INOUT43             0x002c 0x0330 0x08e4 0x02 0x00
+#define IMX94_PAD_GPIO_IO07__GPT_MUX_INOUT3                 0x002c 0x0330 0x0704 0x03 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI7_SCK                     0x002c 0x0330 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO07__LPUART6_RTS_B                  0x002c 0x0330 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO07__LPI2C7_SCL                     0x002c 0x0330 0x0750 0x06 0x00
+#define IMX94_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                0x002c 0x0330 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO08__GPIO2_IO8                      0x0030 0x0334 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO08__LPSPI3_PCS0                    0x0030 0x0334 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO08__USDHC2_WP                      0x0030 0x0334 0x0854 0x02 0x00
+#define IMX94_PAD_GPIO_IO08__GPT_MUX_INOUT2                 0x0030 0x0334 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO08__TPM6_CH0                       0x0030 0x0334 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO08__LPUART7_TX                     0x0030 0x0334 0x07d4 0x05 0x00
+#define IMX94_PAD_GPIO_IO08__LPI2C7_SDA                     0x0030 0x0334 0x0754 0x06 0x01
+#define IMX94_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                0x0030 0x0334 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO09__GPIO2_IO9                      0x0034 0x0338 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO09__LPSPI3_SIN                     0x0034 0x0338 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO09__XBAR1_XBAR_INOUT44             0x0034 0x0338 0x08e8 0x02 0x00
+#define IMX94_PAD_GPIO_IO09__GPT_MUX_INOUT0                 0x0034 0x0338 0x06fc 0x03 0x00
+#define IMX94_PAD_GPIO_IO09__TPM3_EXTCLK                    0x0034 0x0338 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO09__LPUART7_RX                     0x0034 0x0338 0x07d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO09__LPI2C7_SCL                     0x0034 0x0338 0x0750 0x06 0x01
+#define IMX94_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                0x0034 0x0338 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO10__GPIO2_IO10                     0x0038 0x033c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO10__LPSPI3_SOUT                    0x0038 0x033c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO10__XBAR1_XBAR_INOUT45             0x0038 0x033c 0x08ec 0x02 0x00
+#define IMX94_PAD_GPIO_IO10__GPT_MUX_INOUT6                 0x0038 0x033c 0x0710 0x03 0x00
+#define IMX94_PAD_GPIO_IO10__TPM4_EXTCLK                    0x0038 0x033c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO10__LPUART7_CTS_B                  0x0038 0x033c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO10__LPI2C8_SDA                     0x0038 0x033c 0x075c 0x06 0x00
+#define IMX94_PAD_GPIO_IO10__FLEXIO1_FLEXIO10               0x0038 0x033c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO11__GPIO2_IO11                     0x003c 0x0340 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO11__LPSPI3_SCK                     0x003c 0x0340 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO11__XBAR1_XBAR_INOUT46             0x003c 0x0340 0x08f0 0x02 0x00
+#define IMX94_PAD_GPIO_IO11__GPT_MUX_INOUT9                 0x003c 0x0340 0x071c 0x03 0x00
+#define IMX94_PAD_GPIO_IO11__TPM5_EXTCLK                    0x003c 0x0340 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO11__LPUART7_RTS_B                  0x003c 0x0340 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO11__LPI2C8_SCL                     0x003c 0x0340 0x0758 0x06 0x00
+#define IMX94_PAD_GPIO_IO11__FLEXIO1_FLEXIO11               0x003c 0x0340 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO12__GPIO2_IO12                     0x0040 0x0344 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO12__TPM3_CH2                       0x0040 0x0344 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO12__PDM_BIT_STREAM2                0x0040 0x0344 0x0618 0x02 0x00
+#define IMX94_PAD_GPIO_IO12__FLEXIO1_FLEXIO12               0x0040 0x0344 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO12__LPSPI8_PCS0                    0x0040 0x0344 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO12__LPUART8_TX                     0x0040 0x0344 0x07dc 0x05 0x01
+#define IMX94_PAD_GPIO_IO12__LPI2C8_SDA                     0x0040 0x0344 0x075c 0x06 0x01
+
+#define IMX94_PAD_GPIO_IO13__GPIO2_IO13                     0x0044 0x0348 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO13__TPM4_CH2                       0x0044 0x0348 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO13__PDM_BIT_STREAM3                0x0044 0x0348 0x061c 0x02 0x00
+#define IMX94_PAD_GPIO_IO13__XBAR1_XBAR_INOUT47             0x0044 0x0348 0x08f4 0x03 0x00
+#define IMX94_PAD_GPIO_IO13__LPSPI8_SIN                     0x0044 0x0348 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO13__LPUART8_RX                     0x0044 0x0348 0x07d8 0x05 0x01
+#define IMX94_PAD_GPIO_IO13__LPI2C8_SCL                     0x0044 0x0348 0x0758 0x06 0x01
+#define IMX94_PAD_GPIO_IO13__FLEXIO1_FLEXIO13               0x0044 0x0348 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO14__GPIO2_IO14                     0x0048 0x034c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART10_CTS_B                 0x0048 0x034c 0x078c 0x01 0x00
+#define IMX94_PAD_GPIO_IO14__ECAT_SDA                       0x0048 0x034c 0x062c 0x02 0x00
+#define IMX94_PAD_GPIO_IO14__XBAR1_XBAR_INOUT48             0x0048 0x034c 0x08f8 0x03 0x00
+#define IMX94_PAD_GPIO_IO14__LPSPI8_SOUT                    0x0048 0x034c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART8_CTS_B                  0x0048 0x034c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART4_TX                     0x0048 0x034c 0x07b4 0x06 0x00
+#define IMX94_PAD_GPIO_IO14__FLEXIO1_FLEXIO14               0x0048 0x034c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO15__GPIO2_IO15                     0x004c 0x0350 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART10_RTS_B                 0x004c 0x0350 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO15__ECAT_SCL                       0x004c 0x0350 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO15__XBAR1_XBAR_INOUT8              0x004c 0x0350 0x087c 0x03 0x00
+#define IMX94_PAD_GPIO_IO15__LPSPI8_SCK                     0x004c 0x0350 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART8_RTS_B                  0x004c 0x0350 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART4_RX                     0x004c 0x0350 0x07b0 0x06 0x00
+#define IMX94_PAD_GPIO_IO15__FLEXIO1_FLEXIO15               0x004c 0x0350 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO16__GPIO2_IO16                     0x0050 0x0354 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO16__LPI2C3_SDA                     0x0050 0x0354 0x0730 0x01 0x00
+#define IMX94_PAD_GPIO_IO16__CAN3_TX                        0x0050 0x0354 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO16__EWM_OUT_B                      0x0050 0x0354 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO16__LPUART11_TX                    0x0050 0x0354 0x079c 0x04 0x00
+#define IMX94_PAD_GPIO_IO16__GPT_MUX_INOUT0                 0x0050 0x0354 0x06fc 0x05 0x01
+#define IMX94_PAD_GPIO_IO16__FLEXPWM4_PWMA0                 0x0050 0x0354 0x06d4 0x06 0x00
+#define IMX94_PAD_GPIO_IO16__XBAR1_XBAR_INOUT30             0x0050 0x0354 0x08b0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO17__GPIO2_IO17                     0x0054 0x0358 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C3_SCL                     0x0054 0x0358 0x072c 0x01 0x00
+#define IMX94_PAD_GPIO_IO17__CAN3_RX                        0x0054 0x0358 0x0680 0x02 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C6_HREQ                    0x0054 0x0358 0x0744 0x03 0x00
+#define IMX94_PAD_GPIO_IO17__LPUART11_RX                    0x0054 0x0358 0x0798 0x04 0x00
+#define IMX94_PAD_GPIO_IO17__GPT_MUX_INOUT3                 0x0054 0x0358 0x0704 0x05 0x01
+#define IMX94_PAD_GPIO_IO17__FLEXPWM4_PWMB0                 0x0054 0x0358 0x06e4 0x06 0x00
+#define IMX94_PAD_GPIO_IO17__XBAR1_XBAR_INOUT31             0x0054 0x0358 0x08b4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO18__GPIO2_IO18                     0x0058 0x035c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C4_SDA                     0x0058 0x035c 0x0738 0x01 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART10_TX                    0x0058 0x035c 0x0794 0x02 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C7_HREQ                    0x0058 0x035c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART11_CTS_B                 0x0058 0x035c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO18__GPT_MUX_INOUT6                 0x0058 0x035c 0x0710 0x05 0x01
+#define IMX94_PAD_GPIO_IO18__FLEXPWM4_PWMA1                 0x0058 0x035c 0x06d8 0x06 0x00
+#define IMX94_PAD_GPIO_IO18__XBAR1_XBAR_INOUT32             0x0058 0x035c 0x08b8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO19__GPIO2_IO19                     0x005c 0x0360 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C4_SCL                     0x005c 0x0360 0x0734 0x01 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART10_RX                    0x005c 0x0360 0x0790 0x02 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C8_HREQ                    0x005c 0x0360 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART11_RTS_B                 0x005c 0x0360 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO19__GPT_MUX_INOUT9                 0x005c 0x0360 0x071c 0x05 0x01
+#define IMX94_PAD_GPIO_IO19__FLEXPWM4_PWMB1                 0x005c 0x0360 0x06e8 0x06 0x00
+#define IMX94_PAD_GPIO_IO19__XBAR1_XBAR_INOUT33             0x005c 0x0360 0x08bc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO20__GPIO2_IO20                     0x0060 0x0364 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B                 0x0060 0x0364 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO20__LPUART6_TX                     0x0060 0x0364 0x07cc 0x02 0x01
+#define IMX94_PAD_GPIO_IO20__LPI2C8_SDA                     0x0060 0x0364 0x075c 0x03 0x02
+#define IMX94_PAD_GPIO_IO20__LPSPI4_PCS2                    0x0060 0x0364 0x076c 0x04 0x00
+#define IMX94_PAD_GPIO_IO20__LPSPI3_PCS1                    0x0060 0x0364 0x0768 0x05 0x01
+#define IMX94_PAD_GPIO_IO20__FLEXPWM4_PWMA2                 0x0060 0x0364 0x06dc 0x06 0x00
+#define IMX94_PAD_GPIO_IO20__XBAR1_XBAR_INOUT34             0x0060 0x0364 0x08c0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO21__GPIO2_IO21                     0x0064 0x0368 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO21__SAI2_TX_BCLK                   0x0064 0x0368 0x07f8 0x01 0x00
+#define IMX94_PAD_GPIO_IO21__LPUART6_RX                     0x0064 0x0368 0x07c8 0x02 0x01
+#define IMX94_PAD_GPIO_IO21__LPI2C8_SCL                     0x0064 0x0368 0x0758 0x03 0x02
+#define IMX94_PAD_GPIO_IO21__LPSPI4_PCS1                    0x0064 0x0368 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO21__LPI2C3_HREQ                    0x0064 0x0368 0x0728 0x05 0x00
+#define IMX94_PAD_GPIO_IO21__FLEXPWM4_PWMB2                 0x0064 0x0368 0x06ec 0x06 0x00
+#define IMX94_PAD_GPIO_IO21__XBAR1_XBAR_INOUT35             0x0064 0x0368 0x08c4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO22__GPIO2_IO22                     0x0068 0x036c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO22__SAI2_MCLK                      0x0068 0x036c 0x07e8 0x01 0x00
+#define IMX94_PAD_GPIO_IO22__LPUART6_CTS_B                  0x0068 0x036c 0x07c4 0x02 0x01
+#define IMX94_PAD_GPIO_IO22__XBAR1_XBAR_INOUT9              0x0068 0x036c 0x0880 0x03 0x00
+#define IMX94_PAD_GPIO_IO22__LPSPI4_PCS0                    0x0068 0x036c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM3_PWMA3                 0x0068 0x036c 0x06b4 0x05 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM4_PWMA3                 0x0068 0x036c 0x06e0 0x06 0x00
+#define IMX94_PAD_GPIO_IO22__SINC4_EMCLK0                   0x0068 0x036c 0x082c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO23__GPIO2_IO23                     0x006c 0x0370 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B                 0x006c 0x0370 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO23__LPUART6_RTS_B                  0x006c 0x0370 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO23__XBAR1_XBAR_INOUT10             0x006c 0x0370 0x0884 0x03 0x00
+#define IMX94_PAD_GPIO_IO23__LPSPI4_SIN                     0x006c 0x0370 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM3_PWMB3                 0x006c 0x0370 0x06c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM4_PWMB3                 0x006c 0x0370 0x06f0 0x06 0x00
+#define IMX94_PAD_GPIO_IO23__SINC4_EMBIT0                   0x006c 0x0370 0x0820 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO24__GPIO2_IO24                     0x0070 0x0374 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO24__SAI2_RX_BCLK                   0x0070 0x0374 0x07ec 0x01 0x00
+#define IMX94_PAD_GPIO_IO24__LPUART11_TX                    0x0070 0x0374 0x079c 0x02 0x01
+#define IMX94_PAD_GPIO_IO24__LPI2C3_HREQ                    0x0070 0x0374 0x0728 0x03 0x01
+#define IMX94_PAD_GPIO_IO24__LPSPI4_SOUT                    0x0070 0x0374 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO24__SINC_FILTER_GLUE2_BREAK        0x0070 0x0374 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO24__FLEXPWM4_PWMX0                 0x0070 0x0374 0x06f4 0x06 0x00
+#define IMX94_PAD_GPIO_IO24__XBAR1_XBAR_INOUT36             0x0070 0x0374 0x08c8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO25__GPIO2_IO25                     0x0074 0x0378 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO25__SAI2_RX_SYNC                   0x0074 0x0378 0x07f4 0x01 0x00
+#define IMX94_PAD_GPIO_IO25__LPUART11_RX                    0x0074 0x0378 0x0798 0x02 0x01
+#define IMX94_PAD_GPIO_IO25__LPI2C4_HREQ                    0x0074 0x0378 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO25__LPSPI4_SCK                     0x0074 0x0378 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO25__SINC_FILTER_GLUE1_BREAK        0x0074 0x0378 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO25__FLEXPWM4_PWMX1                 0x0074 0x0378 0x06f8 0x06 0x00
+#define IMX94_PAD_GPIO_IO25__XBAR1_XBAR_INOUT37             0x0074 0x0378 0x08cc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO26__GPIO2_IO26                     0x0078 0x037c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO26__LPI2C5_SCL                     0x0078 0x037c 0x073c 0x01 0x01
+#define IMX94_PAD_GPIO_IO26__LPUART12_TX                    0x0078 0x037c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO26__GPT_MUX_INOUT4                 0x0078 0x037c 0x0708 0x03 0x01
+#define IMX94_PAD_GPIO_IO26__FLEXIO1_3_1_FLEXIO0            0x0078 0x037c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO26__SAI2_RX_DATA0                  0x0078 0x037c 0x07f0 0x05 0x00
+#define IMX94_PAD_GPIO_IO26__FLEXPWM4_PWMX2                 0x0078 0x037c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO26__XBAR1_XBAR_INOUT38             0x0078 0x037c 0x08d0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO27__GPIO2_IO27                     0x007c 0x0380 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO27__LPI2C5_SDA                     0x007c 0x0380 0x0740 0x01 0x01
+#define IMX94_PAD_GPIO_IO27__LPUART12_RX                    0x007c 0x0380 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO27__GPT_MUX_INOUT5                 0x007c 0x0380 0x070c 0x03 0x01
+#define IMX94_PAD_GPIO_IO27__FLEXIO1_3_1_FLEXIO1            0x007c 0x0380 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO27__SAI2_TX_DATA0                  0x007c 0x0380 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO27__FLEXPWM4_PWMX3                 0x007c 0x0380 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO27__SINC4_MOD_CLK0                 0x007c 0x0380 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO28__GPIO2_IO28                     0x0080 0x0384 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO28__LPI2C6_SCL                     0x0080 0x0384 0x0748 0x01 0x02
+#define IMX94_PAD_GPIO_IO28__LPUART12_CTS_B                 0x0080 0x0384 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO28__GPT_MUX_INOUT7                 0x0080 0x0384 0x0714 0x03 0x01
+#define IMX94_PAD_GPIO_IO28__FLEXIO1_3_1_FLEXIO2            0x0080 0x0384 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO28__SAI2_TX_SYNC                   0x0080 0x0384 0x07fc 0x05 0x00
+#define IMX94_PAD_GPIO_IO28__FLEXPWM1_PWMX2                 0x0080 0x0384 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO28__XBAR1_XBAR_INOUT4              0x0080 0x0384 0x086c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO29__GPIO2_IO29                     0x0084 0x0388 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO29__LPI2C6_SDA                     0x0084 0x0388 0x074c 0x01 0x02
+#define IMX94_PAD_GPIO_IO29__LPUART12_RTS_B                 0x0084 0x0388 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO29__I3C2_SDA                       0x0084 0x0388 0x0724 0x03 0x01
+#define IMX94_PAD_GPIO_IO29__FLEXIO1_3_1_FLEXIO3            0x0084 0x0388 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM3_PWMX0                 0x0084 0x0388 0x06c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM1_PWMX3                 0x0084 0x0388 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO29__XBAR1_XBAR_INOUT5              0x0084 0x0388 0x0870 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO30__GPIO2_IO30                     0x0088 0x038c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO30__LPIT2_TRIGGER0                 0x0088 0x038c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO30__LPUART3_TX                     0x0088 0x038c 0x07a8 0x02 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR                       0x0088 0x038c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXIO1_3_1_FLEXIO4            0x0088 0x038c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR_B                     0x0088 0x038c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXPWM2_PWMX2                 0x0088 0x038c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO30__XBAR1_XBAR_INOUT6              0x0088 0x038c 0x0874 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO31__GPIO2_IO31                     0x008c 0x0390 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO31__LPIT2_TRIGGER1                 0x008c 0x0390 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO31__LPUART3_RX                     0x008c 0x0390 0x07a4 0x02 0x00
+#define IMX94_PAD_GPIO_IO31__I3C2_SCL                       0x008c 0x0390 0x0720 0x03 0x01
+#define IMX94_PAD_GPIO_IO31__FLEXIO1_3_1_FLEXIO5            0x008c 0x0390 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM3_PWMX1                 0x008c 0x0390 0x06cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM2_PWMX3                 0x008c 0x0390 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO31__XBAR1_XBAR_INOUT7              0x008c 0x0390 0x0878 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO32__GPIO3_IO0                      0x0090 0x0394 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO32__LPIT3_TRIGGER0                 0x0090 0x0394 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO32__LPUART7_TX                     0x0090 0x0394 0x07d4 0x02 0x01
+#define IMX94_PAD_GPIO_IO32__GPT_MUX_INOUT8                 0x0090 0x0394 0x0718 0x03 0x01
+#define IMX94_PAD_GPIO_IO32__FLEXIO1_3_1_FLEXIO6            0x0090 0x0394 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO32__FLEXPWM3_PWMA0                 0x0090 0x0394 0x06a8 0x05 0x00
+#define IMX94_PAD_GPIO_IO32__SINC_FILTER_GLUE2_BREAK        0x0090 0x0394 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO32__XBAR1_XBAR_INOUT8              0x0090 0x0394 0x087c 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO33__GPIO3_IO1                      0x0094 0x0398 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO33__LPIT3_TRIGGER1                 0x0094 0x0398 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO33__LPUART7_RX                     0x0094 0x0398 0x07d0 0x02 0x01
+#define IMX94_PAD_GPIO_IO33__GPT_MUX_INOUT1                 0x0094 0x0398 0x0700 0x03 0x01
+#define IMX94_PAD_GPIO_IO33__FLEXIO1_3_1_FLEXIO7            0x0094 0x0398 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO33__FLEXPWM3_PWMB0                 0x0094 0x0398 0x06b8 0x05 0x00
+#define IMX94_PAD_GPIO_IO33__SINC_FILTER_GLUE1_BREAK        0x0094 0x0398 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO33__XBAR1_XBAR_INOUT9              0x0094 0x0398 0x0880 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO34__GPIO3_IO2                      0x0098 0x039c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO34__LPI2C7_SDA                     0x0098 0x039c 0x0754 0x01 0x02
+#define IMX94_PAD_GPIO_IO34__CAN2_TX                        0x0098 0x039c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO34__ECAT_SDA                       0x0098 0x039c 0x062c 0x03 0x01
+#define IMX94_PAD_GPIO_IO34__FLEXIO1_3_1_FLEXIO8            0x0098 0x039c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM3_PWMA1                 0x0098 0x039c 0x06ac 0x05 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM1_PWMX0                 0x0098 0x039c 0x0698 0x06 0x00
+#define IMX94_PAD_GPIO_IO34__XBAR1_XBAR_INOUT10             0x0098 0x039c 0x0884 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO35__GPIO3_IO3                      0x009c 0x03a0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO35__LPI2C7_SCL                     0x009c 0x03a0 0x0750 0x01 0x02
+#define IMX94_PAD_GPIO_IO35__CAN2_RX                        0x009c 0x03a0 0x067c 0x02 0x01
+#define IMX94_PAD_GPIO_IO35__ECAT_SCL                       0x009c 0x03a0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXIO1_3_1_FLEXIO9            0x009c 0x03a0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM3_PWMB1                 0x009c 0x03a0 0x06bc 0x05 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM1_PWMX1                 0x009c 0x03a0 0x069c 0x06 0x00
+#define IMX94_PAD_GPIO_IO35__XBAR1_XBAR_INOUT11             0x009c 0x03a0 0x0888 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO36__USDHC2_WP                      0x00a0 0x03a4 0x0854 0x03 0x01
+#define IMX94_PAD_GPIO_IO36__FLEXIO1_3_1_FLEXIO10           0x00a0 0x03a4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM3_PWMA2                 0x00a0 0x03a4 0x06b0 0x05 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM2_PWMX0                 0x00a0 0x03a4 0x06a0 0x06 0x00
+#define IMX94_PAD_GPIO_IO36__XBAR1_XBAR_INOUT12             0x00a0 0x03a4 0x088c 0x07 0x00
+#define IMX94_PAD_GPIO_IO36__GPIO3_IO4                      0x00a0 0x03a4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO36__LPI2C8_SDA                     0x00a0 0x03a4 0x075c 0x01 0x03
+#define IMX94_PAD_GPIO_IO36__CAN4_TX                        0x00a0 0x03a4 0x0000 0x02 0x00
+
+#define IMX94_PAD_GPIO_IO37__GPIO3_IO5                      0x00a4 0x03a8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C8_SCL                     0x00a4 0x03a8 0x0758 0x01 0x03
+#define IMX94_PAD_GPIO_IO37__CAN4_RX                        0x00a4 0x03a8 0x0684 0x02 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C5_HREQ                    0x00a4 0x03a8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXIO1_3_1_FLEXIO11           0x00a4 0x03a8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM3_PWMB2                 0x00a4 0x03a8 0x06c0 0x05 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM2_PWMX1                 0x00a4 0x03a8 0x06a4 0x06 0x00
+#define IMX94_PAD_GPIO_IO37__XBAR1_XBAR_INOUT13             0x00a4 0x03a8 0x0890 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO38__GPIO3_IO6                      0x00a8 0x03ac 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO38__NETC_1588MUX_INOUT0            0x00a8 0x03ac 0x064c 0x01 0x00
+#define IMX94_PAD_GPIO_IO38__LPI2C3_SDA                     0x00a8 0x03ac 0x0730 0x02 0x01
+#define IMX94_PAD_GPIO_IO38__LPIT3_TRIGGER2                 0x00a8 0x03ac 0x0764 0x03 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXIO1_3_1_FLEXIO12           0x00a8 0x03ac 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO38__LPUART3_CTS_B                  0x00a8 0x03ac 0x07a0 0x05 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXPWM3_PWMX0                 0x00a8 0x03ac 0x06c8 0x06 0x01
+#define IMX94_PAD_GPIO_IO38__XBAR1_XBAR_INOUT14             0x00a8 0x03ac 0x0894 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO39__GPIO3_IO7                      0x00ac 0x03b0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO39__NETC_1588MUX_INOUT1            0x00ac 0x03b0 0x0650 0x01 0x00
+#define IMX94_PAD_GPIO_IO39__LPI2C3_SCL                     0x00ac 0x03b0 0x072c 0x02 0x01
+#define IMX94_PAD_GPIO_IO39__LPIT2_TRIGGER2                 0x00ac 0x03b0 0x0760 0x03 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXIO1_3_1_FLEXIO13           0x00ac 0x03b0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO39__LPUART3_RTS_B                  0x00ac 0x03b0 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXPWM3_PWMX1                 0x00ac 0x03b0 0x06cc 0x06 0x01
+#define IMX94_PAD_GPIO_IO39__XBAR1_XBAR_INOUT15             0x00ac 0x03b0 0x0898 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO40__GPIO3_IO8                      0x00b0 0x03b4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO40__NETC_1588MUX_INOUT2            0x00b0 0x03b4 0x0654 0x01 0x00
+#define IMX94_PAD_GPIO_IO40__LPI2C7_SDA                     0x00b0 0x03b4 0x0754 0x02 0x03
+#define IMX94_PAD_GPIO_IO40__LPUART4_TX                     0x00b0 0x03b4 0x07b4 0x03 0x01
+#define IMX94_PAD_GPIO_IO40__FLEXIO1_3_1_FLEXIO14           0x00b0 0x03b4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM3_PWMX2                 0x00b0 0x03b4 0x06d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM4_PWMX0                 0x00b0 0x03b4 0x06f4 0x06 0x01
+#define IMX94_PAD_GPIO_IO40__XBAR1_XBAR_INOUT16             0x00b0 0x03b4 0x089c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO41__GPIO3_IO9                      0x00b4 0x03b8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO41__NETC_1588MUX_INOUT3            0x00b4 0x03b8 0x0658 0x01 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C7_SCL                     0x00b4 0x03b8 0x0750 0x02 0x03
+#define IMX94_PAD_GPIO_IO41__LPUART4_RX                     0x00b4 0x03b8 0x07b0 0x03 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXIO1_3_1_FLEXIO15           0x00b4 0x03b8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C6_HREQ                    0x00b4 0x03b8 0x0744 0x05 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXPWM4_PWMX1                 0x00b4 0x03b8 0x06f8 0x06 0x01
+#define IMX94_PAD_GPIO_IO41__XBAR1_XBAR_INOUT17             0x00b4 0x03b8 0x08a0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO42__GPIO3_IO10                     0x00b8 0x03bc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK                   0x00b8 0x03bc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO42__PDM_BIT_STREAM2                0x00b8 0x03bc 0x0618 0x02 0x01
+#define IMX94_PAD_GPIO_IO42__XBAR1_XBAR_INOUT11             0x00b8 0x03bc 0x0888 0x03 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART3_TX                     0x00b8 0x03bc 0x07a8 0x04 0x01
+#define IMX94_PAD_GPIO_IO42__LPSPI4_PCS2                    0x00b8 0x03bc 0x076c 0x05 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART4_CTS_B                  0x00b8 0x03bc 0x07ac 0x06 0x00
+#define IMX94_PAD_GPIO_IO42__SINC4_EMCLK1                   0x00b8 0x03bc 0x0830 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO43__GPIO3_IO11                     0x00bc 0x03c0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO43__SAI3_MCLK                      0x00bc 0x03c0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO43__XBAR1_XBAR_INOUT12             0x00bc 0x03c0 0x088c 0x03 0x01
+#define IMX94_PAD_GPIO_IO43__LPUART3_RX                     0x00bc 0x03c0 0x07a4 0x04 0x01
+#define IMX94_PAD_GPIO_IO43__LPSPI3_PCS1                    0x00bc 0x03c0 0x0768 0x05 0x02
+#define IMX94_PAD_GPIO_IO43__LPUART4_RTS_B                  0x00bc 0x03c0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO43__SINC4_EMBIT1                   0x00bc 0x03c0 0x0824 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO44__GPIO3_IO12                     0x00c0 0x03c4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO44__SAI3_RX_BCLK                   0x00c0 0x03c4 0x0800 0x01 0x00
+#define IMX94_PAD_GPIO_IO44__PDM_BIT_STREAM1                0x00c0 0x03c4 0x0614 0x02 0x01
+#define IMX94_PAD_GPIO_IO44__LPUART9_TX                     0x00c0 0x03c4 0x07e4 0x03 0x00
+#define IMX94_PAD_GPIO_IO44__LPSPI5_PCS0                    0x00c0 0x03c4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO44__LPI2C3_SDA                     0x00c0 0x03c4 0x0730 0x05 0x02
+#define IMX94_PAD_GPIO_IO44__TPM5_CH2                       0x00c0 0x03c4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO44__SINC_FILTER_GLUE4_BREAK        0x00c0 0x03c4 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO45__GPIO3_IO13                     0x00c4 0x03c8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_RX_SYNC                   0x00c4 0x03c8 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO45__PDM_BIT_STREAM3                0x00c4 0x03c8 0x061c 0x02 0x01
+#define IMX94_PAD_GPIO_IO45__LPUART9_RX                     0x00c4 0x03c8 0x07e0 0x03 0x00
+#define IMX94_PAD_GPIO_IO45__LPSPI5_SIN                     0x00c4 0x03c8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO45__LPI2C3_SCL                     0x00c4 0x03c8 0x072c 0x05 0x02
+#define IMX94_PAD_GPIO_IO45__TPM6_CH2                       0x00c4 0x03c8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_TX_DATA0                  0x00c4 0x03c8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO46__GPIO3_IO14                     0x00c8 0x03cc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0                  0x00c8 0x03cc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO46__PDM_BIT_STREAM0                0x00c8 0x03cc 0x0610 0x02 0x01
+#define IMX94_PAD_GPIO_IO46__LPUART9_CTS_B                  0x00c8 0x03cc 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO46__LPSPI5_SOUT                    0x00c8 0x03cc 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO46__LPI2C4_SDA                     0x00c8 0x03cc 0x0738 0x05 0x01
+#define IMX94_PAD_GPIO_IO46__TPM3_CH1                       0x00c8 0x03cc 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO46__EWM_OUT_B                      0x00c8 0x03cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO47__GPIO3_IO15                     0x00cc 0x03d0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0                  0x00cc 0x03d0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO47__PDM_CLK                        0x00cc 0x03d0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO47__LPUART9_RTS_B                  0x00cc 0x03d0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO47__LPSPI5_SCK                     0x00cc 0x03d0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO47__LPI2C4_SCL                     0x00cc 0x03d0 0x0734 0x05 0x01
+#define IMX94_PAD_GPIO_IO47__TPM4_CH1                       0x00cc 0x03d0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_RX_BCLK                   0x00cc 0x03d0 0x0800 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO48__GPIO3_IO16                     0x00d0 0x03d4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO48__USDHC3_CLK                     0x00d0 0x03d4 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO48__CAN5_TX                        0x00d0 0x03d4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO48__LPUART10_TX                    0x00d0 0x03d4 0x0794 0x03 0x01
+#define IMX94_PAD_GPIO_IO48__TPM5_CH1                       0x00d0 0x03d4 0x0840 0x04 0x00
+#define IMX94_PAD_GPIO_IO48__TPM6_EXTCLK                    0x00d0 0x03d4 0x0850 0x05 0x00
+#define IMX94_PAD_GPIO_IO48__LPI2C5_SDA                     0x00d0 0x03d4 0x0740 0x06 0x02
+#define IMX94_PAD_GPIO_IO48__SINC4_EMCLK2                   0x00d0 0x03d4 0x0834 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO49__GPIO3_IO17                     0x00d4 0x03d8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO49__USDHC3_CMD                     0x00d4 0x03d8 0x0858 0x01 0x00
+#define IMX94_PAD_GPIO_IO49__CAN5_RX                        0x00d4 0x03d8 0x0688 0x02 0x01
+#define IMX94_PAD_GPIO_IO49__LPUART10_RX                    0x00d4 0x03d8 0x0790 0x03 0x01
+#define IMX94_PAD_GPIO_IO49__TPM6_CH1                       0x00d4 0x03d8 0x0848 0x04 0x00
+#define IMX94_PAD_GPIO_IO49__XBAR1_XBAR_INOUT13             0x00d4 0x03d8 0x0890 0x05 0x01
+#define IMX94_PAD_GPIO_IO49__LPI2C5_SCL                     0x00d4 0x03d8 0x073c 0x06 0x02
+#define IMX94_PAD_GPIO_IO49__SINC4_EMBIT2                   0x00d4 0x03d8 0x0828 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO50__GPIO3_IO18                     0x00d8 0x03dc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO50__USDHC3_DATA0                   0x00d8 0x03dc 0x085c 0x01 0x00
+#define IMX94_PAD_GPIO_IO50__XBAR1_XBAR_INOUT14             0x00d8 0x03dc 0x0894 0x02 0x01
+#define IMX94_PAD_GPIO_IO50__LPUART10_CTS_B                 0x00d8 0x03dc 0x078c 0x03 0x01
+#define IMX94_PAD_GPIO_IO50__TPM3_CH3                       0x00d8 0x03dc 0x0838 0x04 0x00
+#define IMX94_PAD_GPIO_IO50__JTAG_MUX_TDO                   0x00d8 0x03dc 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO50__LPSPI6_PCS1                    0x00d8 0x03dc 0x0774 0x06 0x00
+#define IMX94_PAD_GPIO_IO50__SINC4_EMCLK3                   0x00d8 0x03dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO51__GPIO3_IO19                     0x00dc 0x03e0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO51__USDHC3_DATA1                   0x00dc 0x03e0 0x0860 0x01 0x00
+#define IMX94_PAD_GPIO_IO51__CAN2_TX                        0x00dc 0x03e0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO51__LPUART10_RTS_B                 0x00dc 0x03e0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO51__TPM4_CH3                       0x00dc 0x03e0 0x083c 0x04 0x00
+#define IMX94_PAD_GPIO_IO51__JTAG_MUX_TCK                   0x00dc 0x03e0 0x0928 0x05 0x01
+#define IMX94_PAD_GPIO_IO51__LPSPI7_PCS1                    0x00dc 0x03e0 0x0778 0x06 0x00
+#define IMX94_PAD_GPIO_IO51__SINC4_EMBIT3                   0x00dc 0x03e0 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO52__GPIO3_IO20                     0x00e0 0x03e4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO52__USDHC3_DATA2                   0x00e0 0x03e4 0x0864 0x01 0x00
+#define IMX94_PAD_GPIO_IO52__PDM_BIT_STREAM1                0x00e0 0x03e4 0x0614 0x02 0x02
+#define IMX94_PAD_GPIO_IO52__LPSPI4_PCS2                    0x00e0 0x03e4 0x076c 0x03 0x02
+#define IMX94_PAD_GPIO_IO52__TPM5_CH3                       0x00e0 0x03e4 0x0844 0x04 0x00
+#define IMX94_PAD_GPIO_IO52__JTAG_MUX_TDI                   0x00e0 0x03e4 0x092c 0x05 0x01
+#define IMX94_PAD_GPIO_IO52__LPSPI8_PCS1                    0x00e0 0x03e4 0x077c 0x06 0x00
+#define IMX94_PAD_GPIO_IO52__SAI3_TX_SYNC                   0x00e0 0x03e4 0x0804 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO53__GPIO3_IO21                     0x00e4 0x03e8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO53__USDHC3_DATA3                   0x00e4 0x03e8 0x0868 0x01 0x00
+#define IMX94_PAD_GPIO_IO53__CAN2_RX                        0x00e4 0x03e8 0x067c 0x02 0x02
+#define IMX94_PAD_GPIO_IO53__LPSPI3_PCS1                    0x00e4 0x03e8 0x0768 0x03 0x03
+#define IMX94_PAD_GPIO_IO53__TPM6_CH3                       0x00e4 0x03e8 0x084c 0x04 0x00
+#define IMX94_PAD_GPIO_IO53__JTAG_MUX_TMS                   0x00e4 0x03e8 0x0930 0x05 0x01
+#define IMX94_PAD_GPIO_IO53__LPSPI5_PCS1                    0x00e4 0x03e8 0x0770 0x06 0x00
+#define IMX94_PAD_GPIO_IO53__SINC4_MOD_CLK1                 0x00e4 0x03e8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO54__GPIO3_IO22                     0x00e8 0x03ec 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO54__NETC_1588MUX_INOUT4            0x00e8 0x03ec 0x065c 0x01 0x00
+#define IMX94_PAD_GPIO_IO54__CAN4_TX                        0x00e8 0x03ec 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO54__LPIT3_TRIGGER2                 0x00e8 0x03ec 0x0764 0x03 0x01
+#define IMX94_PAD_GPIO_IO54__LPSPI6_PCS1                    0x00e8 0x03ec 0x0774 0x04 0x01
+#define IMX94_PAD_GPIO_IO54__TPM3_CH3                       0x00e8 0x03ec 0x0838 0x05 0x01
+#define IMX94_PAD_GPIO_IO54__SINC3_EMCLK0                   0x00e8 0x03ec 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO54__XBAR1_XBAR_INOUT18             0x00e8 0x03ec 0x08a4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO55__GPIO3_IO23                     0x00ec 0x03f0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO55__NETC_1588MUX_INOUT5            0x00ec 0x03f0 0x0660 0x01 0x00
+#define IMX94_PAD_GPIO_IO55__CAN4_RX                        0x00ec 0x03f0 0x0684 0x02 0x01
+#define IMX94_PAD_GPIO_IO55__LPIT2_TRIGGER2                 0x00ec 0x03f0 0x0760 0x03 0x01
+#define IMX94_PAD_GPIO_IO55__LPSPI7_PCS1                    0x00ec 0x03f0 0x0778 0x04 0x01
+#define IMX94_PAD_GPIO_IO55__TPM4_CH3                       0x00ec 0x03f0 0x083c 0x05 0x01
+#define IMX94_PAD_GPIO_IO55__SINC3_EMBIT0                   0x00ec 0x03f0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO55__XBAR1_XBAR_INOUT19             0x00ec 0x03f0 0x08a8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO56__GPIO3_IO24                     0x00f0 0x03f4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO56__NETC_1588MUX_INOUT6            0x00f0 0x03f4 0x0664 0x01 0x00
+#define IMX94_PAD_GPIO_IO56__CAN5_TX                        0x00f0 0x03f4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO56__LPIT3_TRIGGER3                 0x00f0 0x03f4 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO56__LPSPI8_PCS1                    0x00f0 0x03f4 0x077c 0x04 0x01
+#define IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC                   0x00f0 0x03f4 0x0804 0x05 0x01
+#define IMX94_PAD_GPIO_IO56__SINC3_EMCLK1                   0x00f0 0x03f4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO56__XBAR1_XBAR_INOUT20             0x00f0 0x03f4 0x08ac 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO57__GPIO3_IO25                     0x00f4 0x03f8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO57__NETC_1588MUX_INOUT7            0x00f4 0x03f8 0x0668 0x01 0x00
+#define IMX94_PAD_GPIO_IO57__CAN5_RX                        0x00f4 0x03f8 0x0688 0x02 0x02
+#define IMX94_PAD_GPIO_IO57__LPIT2_TRIGGER3                 0x00f4 0x03f8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO57__LPSPI5_PCS1                    0x00f4 0x03f8 0x0770 0x04 0x01
+#define IMX94_PAD_GPIO_IO57__TPM6_CH3                       0x00f4 0x03f8 0x084c 0x05 0x01
+#define IMX94_PAD_GPIO_IO57__SINC3_EMBIT1                   0x00f4 0x03f8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO57__ENET_REF_CLK_ROOT              0x00f4 0x03f8 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO1__CLKO_1                         0x00f8 0x03fc 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO1__NETC_1588MUX_INOUT8            0x00f8 0x03fc 0x066c 0x01 0x00
+#define IMX94_PAD_CCM_CLKO1__LPUART9_TX                     0x00f8 0x03fc 0x07e4 0x02 0x01
+#define IMX94_PAD_CCM_CLKO1__ECAT_LED_RUN                   0x00f8 0x03fc 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO1__TPM6_EXTCLK                    0x00f8 0x03fc 0x0850 0x04 0x01
+#define IMX94_PAD_CCM_CLKO1__GPIO4_IO0                      0x00f8 0x03fc 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO1__SINC3_EMCLK2                   0x00f8 0x03fc 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO1__XBAR1_XBAR_INOUT22             0x00f8 0x03fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO2__CLKO_2                         0x00fc 0x0400 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO2__NETC_1588MUX_INOUT9            0x00fc 0x0400 0x0670 0x01 0x00
+#define IMX94_PAD_CCM_CLKO2__LPUART9_RX                     0x00fc 0x0400 0x07e0 0x02 0x01
+#define IMX94_PAD_CCM_CLKO2__ECAT_LED_ERR                   0x00fc 0x0400 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO2__TPM5_CH1                       0x00fc 0x0400 0x0840 0x04 0x01
+#define IMX94_PAD_CCM_CLKO2__GPIO4_IO1                      0x00fc 0x0400 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO2__SINC3_EMBIT2                   0x00fc 0x0400 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO2__XBAR1_XBAR_INOUT23             0x00fc 0x0400 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO3__CLKO_3                         0x0100 0x0404 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO3__NETC_1588MUX_INOUT10           0x0100 0x0404 0x0674 0x01 0x00
+#define IMX94_PAD_CCM_CLKO3__CAN3_TX                        0x0100 0x0404 0x0000 0x02 0x00
+#define IMX94_PAD_CCM_CLKO3__ECAT_LED_STATE_RUN             0x0100 0x0404 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO3__TPM6_CH1                       0x0100 0x0404 0x0848 0x04 0x01
+#define IMX94_PAD_CCM_CLKO3__GPIO4_IO2                      0x0100 0x0404 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO3__SINC3_EMCLK3                   0x0100 0x0404 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO3__ENET_REF_CLK_ROOT              0x0100 0x0404 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO4__CLKO_4                         0x0104 0x0408 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO4__NETC_1588MUX_INOUT11           0x0104 0x0408 0x0000 0x01 0x00
+#define IMX94_PAD_CCM_CLKO4__CAN3_RX                        0x0104 0x0408 0x0680 0x02 0x01
+#define IMX94_PAD_CCM_CLKO4__ECAT_RESET_OUT                 0x0104 0x0408 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO4__TPM5_CH3                       0x0104 0x0408 0x0844 0x04 0x01
+#define IMX94_PAD_CCM_CLKO4__GPIO4_IO3                      0x0104 0x0408 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO4__SINC3_EMBIT3                   0x0104 0x0408 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO4__XBAR1_XBAR_INOUT25             0x0104 0x0408 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_EMDC                 0x0108 0x040c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_ETH2_SLV_MDC         0x0108 0x040c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__I3C2_SCL                  0x0108 0x040c 0x0720 0x02 0x02
+#define IMX94_PAD_ETH2_MDC_GPIO1__USB1_OTG_ID               0x0108 0x040c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXIO2_FLEXIO0           0x0108 0x040c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__GPIO6_IO0                 0x0108 0x040c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXPWM2_PWMX0            0x0108 0x040c 0x06a0 0x06 0x01
+#define IMX94_PAD_ETH2_MDC_GPIO1__XBAR1_XBAR_INOUT30        0x0108 0x040c 0x08b0 0x07 0x01
+
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_EMDIO               0x010c 0x0410 0x0678 0x00 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_ETH2_SLV_MDIO       0x010c 0x0410 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__I3C2_SDA                 0x010c 0x0410 0x0724 0x02 0x02
+#define IMX94_PAD_ETH2_MDIO_GPIO2__USB1_OTG_PWR             0x010c 0x0410 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXIO2_FLEXIO1          0x010c 0x0410 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__GPIO6_IO1                0x010c 0x0410 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXPWM2_PWMX1           0x010c 0x0410 0x06a4 0x06 0x01
+#define IMX94_PAD_ETH2_MDIO_GPIO2__XBAR1_XBAR_INOUT31       0x010c 0x0410 0x08b4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD3__NETC_PINMUX_ETH2_TXD3          0x0110 0x0414 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD3__LPUART3_DCD_B                  0x0110 0x0414 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD3__CAN2_TX                        0x0110 0x0414 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD3__USB2_OTG_ID                    0x0110 0x0414 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXIO2_FLEXIO2                0x0110 0x0414 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD3__GPIO6_IO2                      0x0110 0x0414 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXPWM2_PWMA0                 0x0110 0x0414 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD3__XBAR1_XBAR_INOUT32             0x0110 0x0414 0x08b8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD2__NETC_PINMUX_ETH2_TXD2          0x0114 0x0418 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD2__ETH2_RMII_REF50_CLK            0x0114 0x0418 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD2__CAN2_RX                        0x0114 0x0418 0x067c 0x02 0x03
+#define IMX94_PAD_ETH2_TXD2__USB2_OTG_OC                    0x0114 0x0418 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXIO2_FLEXIO3                0x0114 0x0418 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD2__GPIO6_IO3                      0x0114 0x0418 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXPWM2_PWMB0                 0x0114 0x0418 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD2__XBAR1_XBAR_INOUT33             0x0114 0x0418 0x08bc 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD1__NETC_PINMUX_ETH2_TXD1          0x0118 0x041c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD1__LPUART3_RTS_B                  0x0118 0x041c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD1__ECAT_CLK25                     0x0118 0x041c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD1__USB1_OTG_OC                    0x0118 0x041c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXIO2_FLEXIO4                0x0118 0x041c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD1__GPIO6_IO4                      0x0118 0x041c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXPWM2_PWMA1                 0x0118 0x041c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD1__XBAR1_XBAR_INOUT34             0x0118 0x041c 0x08c0 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD0__NETC_PINMUX_ETH2_TXD0          0x011c 0x0420 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD0__LPUART3_TX                     0x011c 0x0420 0x07a8 0x01 0x02
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR                       0x011c 0x0420 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR_B                     0x011c 0x0420 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXIO2_FLEXIO5                0x011c 0x0420 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD0__GPIO6_IO5                      0x011c 0x0420 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXPWM2_PWMB1                 0x011c 0x0420 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD0__XBAR1_XBAR_INOUT35             0x011c 0x0420 0x08c4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CTL__NETC_PINMUX_ETH2_TX_CTL      0x0120 0x0424 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CTL__LPUART3_DTR_B                0x0120 0x0424 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TX_CTL__ECAT_LED_RUN                 0x0120 0x0424 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXIO2_FLEXIO6              0x0120 0x0424 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CTL__GPIO6_IO6                    0x0120 0x0424 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXPWM2_PWMA2               0x0120 0x0424 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CTL__XBAR1_XBAR_INOUT36           0x0120 0x0424 0x08c8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CLK__NETC_PINMUX_ETH2_TX_CLK      0x0124 0x0428 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CLK__ECAT_LED_ERR                 0x0124 0x0428 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXIO2_FLEXIO7              0x0124 0x0428 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CLK__GPIO6_IO7                    0x0124 0x0428 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXPWM2_PWMB2               0x0124 0x0428 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CLK__XBAR1_XBAR_INOUT37           0x0124 0x0428 0x08cc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CTL__NETC_PINMUX_ETH2_RX_CTL      0x0128 0x042c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CTL__LPUART3_DSR_B                0x0128 0x042c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CTL__ECAT_LED_STATE_RUN           0x0128 0x042c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CTL__USB2_OTG_PWR                 0x0128 0x042c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXIO2_FLEXIO8              0x0128 0x042c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CTL__GPIO6_IO8                    0x0128 0x042c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXPWM2_PWMA3               0x0128 0x042c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CTL__SINC4_EMCLK0                 0x0128 0x042c 0x082c 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CLK__NETC_PINMUX_ETH2_RX_CLK      0x012c 0x0430 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CLK__LPUART3_RIN_B                0x012c 0x0430 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CLK__ECAT_RESET_OUT               0x012c 0x0430 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CLK__XBAR1_XBAR_INOUT38           0x012c 0x0430 0x08d0 0x03 0x01
+#define IMX94_PAD_ETH2_RX_CLK__FLEXIO2_FLEXIO9              0x012c 0x0430 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CLK__GPIO6_IO9                    0x012c 0x0430 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CLK__FLEXPWM2_PWMB3               0x012c 0x0430 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CLK__SINC4_EMBIT0                 0x012c 0x0430 0x0820 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD0__NETC_PINMUX_ETH2_RXD0          0x0130 0x0434 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD0__LPUART3_RX                     0x0130 0x0434 0x07a4 0x01 0x02
+#define IMX94_PAD_ETH2_RXD0__FLEXIO2_FLEXIO10               0x0130 0x0434 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD0__GPIO6_IO10                     0x0130 0x0434 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD0__DIG_ENCODER2_DATA_EN           0x0130 0x0434 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD0__XBAR1_XBAR_INOUT39             0x0130 0x0434 0x08d4 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD1__NETC_PINMUX_ETH2_RXD1          0x0134 0x0438 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD1__LPUART3_CTS_B                  0x0134 0x0438 0x07a0 0x01 0x01
+#define IMX94_PAD_ETH2_RXD1__LPTMR2_ALT0                    0x0134 0x0438 0x0780 0x03 0x00
+#define IMX94_PAD_ETH2_RXD1__FLEXIO2_FLEXIO11               0x0134 0x0438 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD1__GPIO6_IO11                     0x0134 0x0438 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD1__DIG_ENCODER2_DATA_CLK          0x0134 0x0438 0x068c 0x06 0x00
+#define IMX94_PAD_ETH2_RXD1__XBAR1_XBAR_INOUT40             0x0134 0x0438 0x08d8 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD2__NETC_PINMUX_ETH2_RXD2          0x0138 0x043c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD2__LPTMR2_ALT1                    0x0138 0x043c 0x0784 0x03 0x00
+#define IMX94_PAD_ETH2_RXD2__FLEXIO2_FLEXIO12               0x0138 0x043c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD2__GPIO6_IO12                     0x0138 0x043c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD2__DIG_ENCODER2_DATA_OUT          0x0138 0x043c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD2__XBAR1_XBAR_INOUT41             0x0138 0x043c 0x08dc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD3__NETC_PINMUX_ETH2_RXD3          0x013c 0x0440 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD3__LPTMR2_ALT2                    0x013c 0x0440 0x0788 0x03 0x00
+#define IMX94_PAD_ETH2_RXD3__FLEXIO2_FLEXIO13               0x013c 0x0440 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD3__GPIO6_IO13                     0x013c 0x0440 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD3__DIG_ENCODER2_DATA_IN           0x013c 0x0440 0x0690 0x06 0x00
+#define IMX94_PAD_ETH2_RXD3__XBAR1_XBAR_INOUT42             0x013c 0x0440 0x08e0 0x07 0x01
+
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_EMDC                 0x0140 0x0444 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__LPUART4_DCD_B             0x0140 0x0444 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_ETH3_SLV_MDC         0x0140 0x0444 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__SAI4_TX_SYNC              0x0140 0x0444 0x081c 0x03 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXIO2_FLEXIO14          0x0140 0x0444 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__GPIO6_IO14                0x0140 0x0444 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXPWM1_PWMX0            0x0140 0x0444 0x0698 0x06 0x01
+#define IMX94_PAD_ETH3_MDC_GPIO1__SINC4_MOD_CLK0            0x0140 0x0444 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_EMDIO               0x0144 0x0448 0x0678 0x00 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__LPUART4_RIN_B            0x0144 0x0448 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_ETH3_SLV_MDIO       0x0144 0x0448 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SAI4_TX_BCLK             0x0144 0x0448 0x0818 0x03 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXIO2_FLEXIO15         0x0144 0x0448 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__GPIO6_IO15               0x0144 0x0448 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXPWM1_PWMX1           0x0144 0x0448 0x069c 0x06 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SINC4_MOD_CLK1           0x0144 0x0448 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_TXD3__NETC_PINMUX_ETH3_TXD3          0x0148 0x044c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD3__XSPI_SLV_DATA7                 0x0148 0x044c 0x0924 0x02 0x00
+#define IMX94_PAD_ETH3_TXD3__SAI4_TX_DATA0                  0x0148 0x044c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_TXD3__LPUART3_TX                     0x0148 0x044c 0x07a8 0x04 0x03
+#define IMX94_PAD_ETH3_TXD3__GPIO6_IO16                     0x0148 0x044c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD3__FLEXPWM1_PWMA0                 0x0148 0x044c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD2__NETC_PINMUX_ETH3_TXD2          0x014c 0x0450 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD2__ETH3_RMII_REF50_CLK            0x014c 0x0450 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD2__XSPI_SLV_DATA6                 0x014c 0x0450 0x0920 0x02 0x00
+#define IMX94_PAD_ETH3_TXD2__SAI4_RX_SYNC                   0x014c 0x0450 0x0814 0x03 0x00
+#define IMX94_PAD_ETH3_TXD2__GPIO6_IO17                     0x014c 0x0450 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD2__FLEXPWM1_PWMB0                 0x014c 0x0450 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD1__NETC_PINMUX_ETH3_TXD1          0x0150 0x0454 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD1__LPUART4_RTS_B                  0x0150 0x0454 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD1__XSPI_SLV_DATA5                 0x0150 0x0454 0x091c 0x02 0x00
+#define IMX94_PAD_ETH3_TXD1__SAI4_RX_BCLK                   0x0150 0x0454 0x080c 0x03 0x00
+#define IMX94_PAD_ETH3_TXD1__GPIO6_IO18                     0x0150 0x0454 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD1__FLEXPWM1_PWMA1                 0x0150 0x0454 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD0__NETC_PINMUX_ETH3_TXD0          0x0154 0x0458 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD0__LPUART4_TX                     0x0154 0x0458 0x07b4 0x01 0x02
+#define IMX94_PAD_ETH3_TXD0__XSPI_SLV_DATA4                 0x0154 0x0458 0x0918 0x02 0x00
+#define IMX94_PAD_ETH3_TXD0__SAI4_RX_DATA0                  0x0154 0x0458 0x0810 0x03 0x00
+#define IMX94_PAD_ETH3_TXD0__GPIO6_IO19                     0x0154 0x0458 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD0__FLEXPWM1_PWMB1                 0x0154 0x0458 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CTL__NETC_PINMUX_ETH3_TX_CTL      0x0158 0x045c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART4_DTR_B                0x0158 0x045c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TX_CTL__XSPI_SLV_DQS                 0x0158 0x045c 0x0900 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CTL__SAI4_MCLK                    0x0158 0x045c 0x0808 0x03 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART3_RX                   0x0158 0x045c 0x07a4 0x04 0x03
+#define IMX94_PAD_ETH3_TX_CTL__GPIO6_IO20                   0x0158 0x045c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CTL__FLEXPWM1_PWMA2               0x0158 0x045c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CLK__NETC_PINMUX_ETH3_TX_CLK      0x015c 0x0460 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CLK__XSPI_SLV_CLK                 0x015c 0x0460 0x0904 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CLK__SAI2_TX_SYNC                 0x015c 0x0460 0x07fc 0x03 0x01
+#define IMX94_PAD_ETH3_TX_CLK__LPUART3_CTS_B                0x015c 0x0460 0x07a0 0x04 0x02
+#define IMX94_PAD_ETH3_TX_CLK__GPIO6_IO21                   0x015c 0x0460 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CLK__FLEXPWM1_PWMB2               0x015c 0x0460 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_RX_CTL__NETC_PINMUX_ETH3_RX_CTL      0x0160 0x0464 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CTL__LPUART4_DSR_B                0x0160 0x0464 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RX_CTL__XSPI_SLV_CS                  0x0160 0x0464 0x08fc 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SAI2_TX_BCLK                 0x0160 0x0464 0x07f8 0x03 0x01
+#define IMX94_PAD_ETH3_RX_CTL__XBAR1_XBAR_INOUT43           0x0160 0x0464 0x08e4 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CTL__GPIO6_IO22                   0x0160 0x0464 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CTL__FLEXPWM1_PWMA3               0x0160 0x0464 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SINC4_EMCLK1                 0x0160 0x0464 0x0830 0x07 0x01
+
+#define IMX94_PAD_ETH3_RX_CLK__NETC_PINMUX_ETH3_RX_CLK      0x0164 0x0468 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CLK__LPUART4_CTS_B                0x0164 0x0468 0x07ac 0x01 0x01
+#define IMX94_PAD_ETH3_RX_CLK__XSPI_SLV_DATA3               0x0164 0x0468 0x0914 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SAI2_TX_DATA0                0x0164 0x0468 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_RX_CLK__XBAR1_XBAR_INOUT44           0x0164 0x0468 0x08e8 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CLK__GPIO6_IO23                   0x0164 0x0468 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CLK__FLEXPWM1_PWMB3               0x0164 0x0468 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SINC4_EMBIT1                 0x0164 0x0468 0x0824 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD0__NETC_PINMUX_ETH3_RXD0          0x0168 0x046c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD0__LPUART4_RX                     0x0168 0x046c 0x07b0 0x01 0x02
+#define IMX94_PAD_ETH3_RXD0__XSPI_SLV_DATA2                 0x0168 0x046c 0x0910 0x02 0x00
+#define IMX94_PAD_ETH3_RXD0__SAI2_RX_SYNC                   0x0168 0x046c 0x07f4 0x03 0x01
+#define IMX94_PAD_ETH3_RXD0__GPIO6_IO24                     0x0168 0x046c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD0__DIG_ENCODER1_DATA_EN           0x0168 0x046c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD0__XBAR1_XBAR_INOUT45             0x0168 0x046c 0x08ec 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD1__NETC_PINMUX_ETH3_RXD1          0x016c 0x0470 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD1__XSPI_SLV_DATA1                 0x016c 0x0470 0x090c 0x02 0x00
+#define IMX94_PAD_ETH3_RXD1__SAI2_RX_BCLK                   0x016c 0x0470 0x07ec 0x03 0x01
+#define IMX94_PAD_ETH3_RXD1__LPUART3_RTS_B                  0x016c 0x0470 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_RXD1__GPIO6_IO25                     0x016c 0x0470 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD1__DIG_ENCODER1_DATA_CLK          0x016c 0x0470 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD1__XBAR1_XBAR_INOUT46             0x016c 0x0470 0x08f0 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD2__NETC_PINMUX_ETH3_RXD2          0x0170 0x0474 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD2__MQS2_RIGHT                     0x0170 0x0474 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD2__XSPI_SLV_DATA0                 0x0170 0x0474 0x0908 0x02 0x00
+#define IMX94_PAD_ETH3_RXD2__SAI2_RX_DATA0                  0x0170 0x0474 0x07f0 0x03 0x01
+#define IMX94_PAD_ETH3_RXD2__GPIO6_IO26                     0x0170 0x0474 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD2__DIG_ENCODER1_DATA_OUT          0x0170 0x0474 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD2__XBAR1_XBAR_INOUT47             0x0170 0x0474 0x08f4 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD3__NETC_PINMUX_ETH3_RXD3          0x0174 0x0478 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD3__MQS2_LEFT                      0x0174 0x0478 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD3__SAI2_MCLK                      0x0174 0x0478 0x07e8 0x03 0x01
+#define IMX94_PAD_ETH3_RXD3__GPIO6_IO27                     0x0174 0x0478 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD3__DIG_ENCODER1_DATA_IN           0x0174 0x0478 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD3__XBAR1_XBAR_INOUT48             0x0174 0x0478 0x08f8 0x07 0x01
+
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_EMDC                 0x0178 0x047c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_MDC                  0x0178 0x047c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_CLK25                0x0178 0x047c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_ETH4_SLV_MDC         0x0178 0x047c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXIO1_3_2_FLEXIO12      0x0178 0x047c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__GPIO6_IO28                0x0178 0x047c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXPWM4_PWMX0            0x0178 0x047c 0x06f4 0x06 0x02
+#define IMX94_PAD_ETH4_MDC_GPIO1__SINC4_MOD_CLK2            0x0178 0x047c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_EMDIO               0x017c 0x0480 0x0678 0x00 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ECAT_MDIO                0x017c 0x0480 0x0628 0x01 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ENET_REF_CLK_ROOT        0x017c 0x0480 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_ETH4_SLV_MDIO       0x017c 0x0480 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXIO1_3_2_FLEXIO13     0x017c 0x0480 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__GPIO6_IO29               0x017c 0x0480 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXPWM4_PWMX1           0x017c 0x0480 0x06f8 0x06 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__SINC_FILTER_GLUE4_BREAK  0x017c 0x0480 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TX_CLK__NETC_PINMUX_ETH4_TX_CLK      0x0180 0x0484 0x0648 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CLK__USDHC3_CLK                   0x0180 0x0484 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_TX_CLK__XSPI2_A_SCLK                 0x0180 0x0484 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CLK__ECAT_LED_ERR                 0x0180 0x0484 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXIO1_3_2_FLEXIO0          0x0180 0x0484 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CLK__GPIO6_IO30                   0x0180 0x0484 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXPWM4_PWMA0               0x0180 0x0484 0x06d4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CLK__XBAR1_XBAR_INOUT30           0x0180 0x0484 0x08b0 0x07 0x02
+
+#define IMX94_PAD_ETH4_TX_CTL__NETC_PINMUX_ETH4_TX_CTL      0x0184 0x0488 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CTL__USDHC3_CMD                   0x0184 0x0488 0x0858 0x01 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XSPI2_A_SS0_B                0x0184 0x0488 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CTL__ECAT_RESET_OUT               0x0184 0x0488 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXIO1_3_2_FLEXIO1          0x0184 0x0488 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CTL__GPIO6_IO31                   0x0184 0x0488 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXPWM4_PWMB0               0x0184 0x0488 0x06e4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XBAR1_XBAR_INOUT31           0x0184 0x0488 0x08b4 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD0__NETC_PINMUX_ETH4_TXD0          0x0188 0x048c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD0__USDHC3_DATA0                   0x0188 0x048c 0x085c 0x01 0x01
+#define IMX94_PAD_ETH4_TXD0__XSPI2_A_DATA0                  0x0188 0x048c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD0__ECAT_LED_RUN                   0x0188 0x048c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXIO1_3_2_FLEXIO2            0x0188 0x048c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD0__GPIO7_IO0                      0x0188 0x048c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXPWM4_PWMA1                 0x0188 0x048c 0x06d8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD0__XBAR1_XBAR_INOUT32             0x0188 0x048c 0x08b8 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD1__NETC_PINMUX_ETH4_TXD1          0x018c 0x0490 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD1__USDHC3_DATA1                   0x018c 0x0490 0x0860 0x01 0x01
+#define IMX94_PAD_ETH4_TXD1__XSPI2_A_DATA1                  0x018c 0x0490 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD1__ECAT_LED_STATE_RUN             0x018c 0x0490 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXIO1_3_2_FLEXIO3            0x018c 0x0490 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD1__GPIO7_IO1                      0x018c 0x0490 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXPWM4_PWMB1                 0x018c 0x0490 0x06e8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD1__XBAR1_XBAR_INOUT33             0x018c 0x0490 0x08bc 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD2__NETC_PINMUX_ETH4_TXD2          0x0190 0x0494 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD2__USDHC3_DATA2                   0x0190 0x0494 0x0864 0x01 0x01
+#define IMX94_PAD_ETH4_TXD2__XSPI2_A_DATA2                  0x0190 0x0494 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD2__ECAT_CLK25                     0x0190 0x0494 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXIO1_3_2_FLEXIO4            0x0190 0x0494 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD2__GPIO7_IO2                      0x0190 0x0494 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXPWM4_PWMA2                 0x0190 0x0494 0x06dc 0x06 0x01
+#define IMX94_PAD_ETH4_TXD2__ETH4_RMII_REF50_CLK            0x0190 0x0494 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TXD3__NETC_PINMUX_ETH4_TXD3          0x0194 0x0498 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD3__USDHC3_DATA3                   0x0194 0x0498 0x0868 0x01 0x01
+#define IMX94_PAD_ETH4_TXD3__XSPI2_A_DATA3                  0x0194 0x0498 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXIO1_3_2_FLEXIO5            0x0194 0x0498 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD3__GPIO7_IO3                      0x0194 0x0498 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXPWM4_PWMB2                 0x0194 0x0498 0x06ec 0x06 0x01
+#define IMX94_PAD_ETH4_TXD3__XBAR1_XBAR_INOUT35             0x0194 0x0498 0x08c4 0x07 0x02
+
+#define IMX94_PAD_ETH4_RXD0__NETC_PINMUX_ETH4_RXD0          0x0198 0x049c 0x0638 0x00 0x00
+#define IMX94_PAD_ETH4_RXD0__XSPI2_A_DATA4                  0x0198 0x049c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXIO1_3_2_FLEXIO6            0x0198 0x049c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD0__GPIO7_IO4                      0x0198 0x049c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXPWM4_PWMA3                 0x0198 0x049c 0x06e0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD0__SINC4_EMCLK2                   0x0198 0x049c 0x0834 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD1__NETC_PINMUX_ETH4_RXD1          0x019c 0x04a0 0x063c 0x00 0x00
+#define IMX94_PAD_ETH4_RXD1__XSPI2_A_DATA5                  0x019c 0x04a0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO2_4_1_FLEXIO11           0x019c 0x04a0 0x0694 0x03 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO1_3_2_FLEXIO7            0x019c 0x04a0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD1__GPIO7_IO5                      0x019c 0x04a0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXPWM4_PWMB3                 0x019c 0x04a0 0x06f0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD1__SINC4_EMBIT2                   0x019c 0x04a0 0x0828 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD2__NETC_PINMUX_ETH4_RXD2          0x01a0 0x04a4 0x0640 0x00 0x00
+#define IMX94_PAD_ETH4_RXD2__XSPI2_A_DATA6                  0x01a0 0x04a4 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO2_4_1_FLEXIO12           0x01a0 0x04a4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO1_3_2_FLEXIO8            0x01a0 0x04a4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD2__GPIO7_IO6                      0x01a0 0x04a4 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD2__DIG_ENCODER2_DATA_EN           0x01a0 0x04a4 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RXD2__XBAR1_XBAR_INOUT4              0x01a0 0x04a4 0x086c 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD3__NETC_PINMUX_ETH4_RXD3          0x01a4 0x04a8 0x0644 0x00 0x00
+#define IMX94_PAD_ETH4_RXD3__ENET_REF_CLK_ROOT              0x01a4 0x04a8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_RXD3__XSPI2_A_DATA7                  0x01a4 0x04a8 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO2_4_1_FLEXIO13           0x01a4 0x04a8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO1_3_2_FLEXIO9            0x01a4 0x04a8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD3__GPIO7_IO7                      0x01a4 0x04a8 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD3__DIG_ENCODER2_DATA_CLK          0x01a4 0x04a8 0x068c 0x06 0x01
+#define IMX94_PAD_ETH4_RXD3__XBAR1_XBAR_INOUT5              0x01a4 0x04a8 0x0870 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CTL__NETC_PINMUX_ETH4_RX_CTL      0x01a8 0x04ac 0x0634 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XSPI2_A_SS1_B                0x01a8 0x04ac 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO2_4_1_FLEXIO14         0x01a8 0x04ac 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO1_3_2_FLEXIO10         0x01a8 0x04ac 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CTL__GPIO7_IO8                    0x01a8 0x04ac 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CTL__DIG_ENCODER2_DATA_OUT        0x01a8 0x04ac 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XBAR1_XBAR_INOUT6            0x01a8 0x04ac 0x0874 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CLK__NETC_PINMUX_ETH4_RX_CLK      0x01ac 0x04b0 0x0630 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CLK__XSPI2_A_DQS                  0x01ac 0x04b0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO2_4_1_FLEXIO15         0x01ac 0x04b0 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO1_3_2_FLEXIO11         0x01ac 0x04b0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CLK__GPIO7_IO9                    0x01ac 0x04b0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CLK__DIG_ENCODER2_DATA_IN         0x01ac 0x04b0 0x0690 0x06 0x01
+#define IMX94_PAD_ETH4_RX_CLK__XBAR1_XBAR_INOUT7            0x01ac 0x04b0 0x0878 0x07 0x01
+
+#define IMX94_PAD_ETH0_TXD0__NETC_PINMUX_ETH0_TXD0          0x01b0 0x04b4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD0__ECAT_PT0_TXD0                  0x01b0 0x04b4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD0__FLEXIO4_FLEXIO0                0x01b0 0x04b4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD0__GPIO5_IO0                      0x01b0 0x04b4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD1__NETC_PINMUX_ETH0_TXD1          0x01b4 0x04b8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD1__ECAT_PT0_TXD1                  0x01b4 0x04b8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD1__FLEXIO4_FLEXIO1                0x01b4 0x04b8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD1__GPIO5_IO1                      0x01b4 0x04b8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_EN__NETC_PINMUX_ETH0_TX_EN        0x01b8 0x04bc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_EN__ECAT_PT0_TX_EN                0x01b8 0x04bc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_EN__FLEXIO4_FLEXIO2               0x01b8 0x04bc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_EN__GPIO5_IO2                     0x01b8 0x04bc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_CLK__NETC_PINMUX_ETH0_TX_CLK      0x01bc 0x04c0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_CLK__ECAT_PT0_TX_CLK              0x01bc 0x04c0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_CLK__FLEXIO4_FLEXIO3              0x01bc 0x04c0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_CLK__GPIO5_IO3                    0x01bc 0x04c0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD0__NETC_PINMUX_ETH0_RXD0          0x01c0 0x04c4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD0__ECAT_PT0_RXD0                  0x01c0 0x04c4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD0__FLEXIO4_FLEXIO4                0x01c0 0x04c4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD0__GPIO5_IO4                      0x01c0 0x04c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD1__NETC_PINMUX_ETH0_RXD1          0x01c4 0x04c8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD1__ECAT_PT0_RXD1                  0x01c4 0x04c8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD1__FLEXIO4_FLEXIO5                0x01c4 0x04c8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD1__GPIO5_IO5                      0x01c4 0x04c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_DV__NETC_PINMUX_ETH0_RX_DV        0x01c8 0x04cc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_DV__ECAT_PT0_RX_DV                0x01c8 0x04cc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_DV__FLEXIO4_FLEXIO6               0x01c8 0x04cc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_DV__GPIO5_IO6                     0x01c8 0x04cc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD2__NETC_PINMUX_ETH0_TXD2          0x01cc 0x04d0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD2__ECAT_PT0_TXD2                  0x01cc 0x04d0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD2__ETH0_RMII_REF50_CLK            0x01cc 0x04d0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_TXD2__FLEXIO4_FLEXIO7                0x01cc 0x04d0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD2__GPIO5_IO7                      0x01cc 0x04d0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD3__NETC_PINMUX_ETH0_TXD3          0x01d0 0x04d4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD3__ECAT_PT0_TXD3                  0x01d0 0x04d4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD3__FLEXIO4_FLEXIO8                0x01d0 0x04d4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD3__GPIO5_IO8                      0x01d0 0x04d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD2__NETC_PINMUX_ETH0_RXD2          0x01d4 0x04d8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD2__ECAT_PT0_RXD2                  0x01d4 0x04d8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD2__FLEXIO4_FLEXIO9                0x01d4 0x04d8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD2__GPIO5_IO9                      0x01d4 0x04d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD3__NETC_PINMUX_ETH0_RXD3          0x01d8 0x04dc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD3__ECAT_PT0_RXD3                  0x01d8 0x04dc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD3__FLEXIO4_FLEXIO10               0x01d8 0x04dc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD3__GPIO5_IO10                     0x01d8 0x04dc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_CLK__NETC_PINMUX_ETH0_RX_CLK      0x01dc 0x04e0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_CLK__ECAT_PT0_RX_CLK              0x01dc 0x04e0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_CLK__FLEXIO4_FLEXIO11             0x01dc 0x04e0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_CLK__GPIO5_IO11                   0x01dc 0x04e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_ER__NETC_PINMUX_ETH0_RX_ER        0x01e0 0x04e4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_ER__ECAT_PT0_RX_ER                0x01e0 0x04e4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_ER__FLEXIO4_FLEXIO12              0x01e0 0x04e4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_ER__GPIO5_IO12                    0x01e0 0x04e4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_ER__NETC_PINMUX_ETH0_TX_ER        0x01e4 0x04e8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_ER__ECAT_LINK_ACT0                0x01e4 0x04e8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_ER__FLEXIO4_FLEXIO13              0x01e4 0x04e8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_ER__GPIO5_IO13                    0x01e4 0x04e8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_CRS__NETC_PINMUX_ETH0_CRS            0x01e8 0x04ec 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_CRS__ECAT_LINK0                      0x01e8 0x04ec 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_CRS__NETC_EMDC                       0x01e8 0x04ec 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_CRS__FLEXIO4_FLEXIO14                0x01e8 0x04ec 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_CRS__GPIO5_IO14                      0x01e8 0x04ec 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_CRS__XBAR1_XBAR_INOUT8               0x01e8 0x04ec 0x087c 0x06 0x02
+#define IMX94_PAD_ETH0_CRS__SINC_FILTER_GLUE2_BREAK         0x01e8 0x04ec 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH0_COL__NETC_PINMUX_ETH0_COL            0x01ec 0x04f0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_COL__ECAT_LINK1                      0x01ec 0x04f0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_COL__NETC_EMDIO                      0x01ec 0x04f0 0x0678 0x02 0x03
+#define IMX94_PAD_ETH0_COL__FLEXIO4_FLEXIO15                0x01ec 0x04f0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_COL__GPIO5_IO15                      0x01ec 0x04f0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_COL__XBAR1_XBAR_INOUT9               0x01ec 0x04f0 0x0880 0x06 0x02
+#define IMX94_PAD_ETH0_COL__SINC_FILTER_GLUE1_BREAK         0x01ec 0x04f0 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_TXD0__NETC_PINMUX_ETH1_TXD0          0x01f0 0x04f4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD0__ECAT_PT1_TXD0                  0x01f0 0x04f4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD0__ENCODER_DIAG0                  0x01f0 0x04f4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD0__FLEXIO3_FLEXIO0                0x01f0 0x04f4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD0__GPIO5_IO16                     0x01f0 0x04f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD1__NETC_PINMUX_ETH1_TXD1          0x01f4 0x04f8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD1__ECAT_PT1_TXD1                  0x01f4 0x04f8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD1__ENCODER_DIAG1                  0x01f4 0x04f8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD1__FLEXIO3_FLEXIO1                0x01f4 0x04f8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD1__GPIO5_IO17                     0x01f4 0x04f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_EN__NETC_PINMUX_ETH1_TX_EN        0x01f8 0x04fc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_EN__ECAT_PT1_TX_EN                0x01f8 0x04fc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_EN__ENCODER_DIAG2                 0x01f8 0x04fc 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_EN__FLEXIO3_FLEXIO2               0x01f8 0x04fc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_EN__GPIO5_IO18                    0x01f8 0x04fc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_CLK__NETC_PINMUX_ETH1_TX_CLK      0x01fc 0x0500 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ECAT_PT1_TX_CLK              0x01fc 0x0500 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ENCODER_DIAG3                0x01fc 0x0500 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_CLK__FLEXIO3_FLEXIO3              0x01fc 0x0500 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_CLK__GPIO5_IO19                   0x01fc 0x0500 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD0__NETC_PINMUX_ETH1_RXD0          0x0200 0x0504 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD0__ECAT_PT1_RXD0                  0x0200 0x0504 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD0__ENCODER_DIAG4                  0x0200 0x0504 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD0__FLEXIO3_FLEXIO4                0x0200 0x0504 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD0__GPIO5_IO20                     0x0200 0x0504 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD1__NETC_PINMUX_ETH1_RXD1          0x0204 0x0508 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD1__ECAT_PT1_RXD1                  0x0204 0x0508 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD1__ENCODER_DIAG5                  0x0204 0x0508 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD1__FLEXIO3_FLEXIO5                0x0204 0x0508 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD1__GPIO5_IO21                     0x0204 0x0508 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_DV__NETC_PINMUX_ETH1_RX_DV        0x0208 0x050c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_DV__ECAT_PT1_RX_DV                0x0208 0x050c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_DV__ENCODER_DIAG6                 0x0208 0x050c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_DV__FLEXIO3_FLEXIO6               0x0208 0x050c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_DV__GPIO5_IO22                    0x0208 0x050c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD2__NETC_PINMUX_ETH1_TXD2          0x020c 0x0510 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD2__ECAT_PT1_TXD2                  0x020c 0x0510 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD2__ETH1_RMII_REF50_CLK            0x020c 0x0510 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_TXD2__ENCODER_DIAG7                  0x020c 0x0510 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD2__FLEXIO3_FLEXIO7                0x020c 0x0510 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD2__GPIO5_IO23                     0x020c 0x0510 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD3__NETC_PINMUX_ETH1_TXD3          0x0210 0x0514 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD3__ECAT_PT1_TXD3                  0x0210 0x0514 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD3__ENCODER_DIAG8                  0x0210 0x0514 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD3__FLEXIO3_FLEXIO8                0x0210 0x0514 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD3__GPIO5_IO24                     0x0210 0x0514 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD2__NETC_PINMUX_ETH1_RXD2          0x0214 0x0518 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD2__ECAT_PT1_RXD2                  0x0214 0x0518 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD2__ENCODER_DIAG9                  0x0214 0x0518 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD2__FLEXIO3_FLEXIO9                0x0214 0x0518 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD2__GPIO5_IO25                     0x0214 0x0518 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD3__NETC_PINMUX_ETH1_RXD3          0x0218 0x051c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD3__ECAT_PT1_RXD3                  0x0218 0x051c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD3__ENCODER_DIAG10                 0x0218 0x051c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD3__FLEXIO3_FLEXIO10               0x0218 0x051c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD3__GPIO5_IO26                     0x0218 0x051c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_CLK__NETC_PINMUX_ETH1_RX_CLK      0x021c 0x0520 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ECAT_PT1_RX_CLK              0x021c 0x0520 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ENCODER_DIAG11               0x021c 0x0520 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_CLK__FLEXIO3_FLEXIO11             0x021c 0x0520 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_CLK__GPIO5_IO27                   0x021c 0x0520 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_ER__NETC_PINMUX_ETH1_RX_ER        0x0220 0x0524 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_ER__ECAT_PT1_RX_ER                0x0220 0x0524 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_ER__ENCODER_DIAG12                0x0220 0x0524 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_ER__FLEXIO3_FLEXIO12              0x0220 0x0524 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_ER__GPIO5_IO28                    0x0220 0x0524 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_ER__NETC_PINMUX_ETH1_TX_ER        0x0224 0x0528 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_ER__ECAT_LINK_ACT1                0x0224 0x0528 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_ER__ENCODER_DIAG13                0x0224 0x0528 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_ER__FLEXIO3_FLEXIO13              0x0224 0x0528 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_ER__GPIO5_IO29                    0x0224 0x0528 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_CRS__NETC_PINMUX_ETH1_CRS            0x0228 0x052c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_CRS__ECAT_MDC                        0x0228 0x052c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_CRS__NETC_EMDC                       0x0228 0x052c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_CRS__ENCODER_DIAG14                  0x0228 0x052c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_CRS__FLEXIO3_FLEXIO14                0x0228 0x052c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_CRS__GPIO5_IO30                      0x0228 0x052c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_CRS__XBAR1_XBAR_INOUT10              0x0228 0x052c 0x0884 0x06 0x02
+#define IMX94_PAD_ETH1_CRS__SINC_FILTER_GLUE1_BREAK         0x0228 0x052c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_COL__NETC_PINMUX_ETH1_COL            0x022c 0x0530 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_COL__ECAT_MDIO                       0x022c 0x0530 0x0628 0x01 0x01
+#define IMX94_PAD_ETH1_COL__NETC_EMDIO                      0x022c 0x0530 0x0678 0x02 0x04
+#define IMX94_PAD_ETH1_COL__ENCODER_DIAG15                  0x022c 0x0530 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_COL__FLEXIO3_FLEXIO15                0x022c 0x0530 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_COL__GPIO5_IO31                      0x022c 0x0530 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_COL__XBAR1_XBAR_INOUT11              0x022c 0x0530 0x0888 0x06 0x02
+#define IMX94_PAD_ETH1_COL__SINC_FILTER_GLUE2_BREAK         0x022c 0x0530 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CLK__USDHC1_CLK                       0x0230 0x0534 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CLK__SAI4_TX_BCLK                     0x0230 0x0534 0x0818 0x01 0x01
+#define IMX94_PAD_SD1_CLK__CAN4_TX                          0x0230 0x0534 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_CLK__NETC_1588MUX_INOUT0              0x0230 0x0534 0x064c 0x03 0x01
+#define IMX94_PAD_SD1_CLK__FLEXIO2_4_1_FLEXIO0              0x0230 0x0534 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CLK__GPIO4_IO8                        0x0230 0x0534 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CLK__FLEXPWM3_PWMX0                   0x0230 0x0534 0x06c8 0x06 0x02
+#define IMX94_PAD_SD1_CLK__SINC1_EMCLK0                     0x0230 0x0534 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CMD__USDHC1_CMD                       0x0234 0x0538 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CMD__SAI4_RX_BCLK                     0x0234 0x0538 0x080c 0x01 0x01
+#define IMX94_PAD_SD1_CMD__CAN4_RX                          0x0234 0x0538 0x0684 0x02 0x02
+#define IMX94_PAD_SD1_CMD__NETC_1588MUX_INOUT1              0x0234 0x0538 0x0650 0x03 0x01
+#define IMX94_PAD_SD1_CMD__FLEXIO2_4_1_FLEXIO1              0x0234 0x0538 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CMD__GPIO4_IO9                        0x0234 0x0538 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CMD__FLEXPWM3_PWMX1                   0x0234 0x0538 0x06cc 0x06 0x02
+#define IMX94_PAD_SD1_CMD__SINC1_EMBIT0                     0x0234 0x0538 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA0__USDHC1_DATA0                   0x0238 0x053c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA0__SAI4_RX_SYNC                   0x0238 0x053c 0x0814 0x01 0x01
+#define IMX94_PAD_SD1_DATA0__CAN5_TX                        0x0238 0x053c 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA0__NETC_1588MUX_INOUT2            0x0238 0x053c 0x0654 0x03 0x01
+#define IMX94_PAD_SD1_DATA0__FLEXIO2_4_1_FLEXIO2            0x0238 0x053c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA0__GPIO4_IO10                     0x0238 0x053c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA0__FLEXPWM3_PWMX2                 0x0238 0x053c 0x06d0 0x06 0x01
+#define IMX94_PAD_SD1_DATA0__SINC1_EMCLK1                   0x0238 0x053c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA1__USDHC1_DATA1                   0x023c 0x0540 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA1__SAI4_TX_SYNC                   0x023c 0x0540 0x081c 0x01 0x01
+#define IMX94_PAD_SD1_DATA1__CAN5_RX                        0x023c 0x0540 0x0688 0x02 0x03
+#define IMX94_PAD_SD1_DATA1__NETC_1588MUX_INOUT3            0x023c 0x0540 0x0658 0x03 0x01
+#define IMX94_PAD_SD1_DATA1__FLEXIO2_4_1_FLEXIO3            0x023c 0x0540 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA1__GPIO4_IO11                     0x023c 0x0540 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA1__FLEXPWM3_PWMA3                 0x023c 0x0540 0x06b4 0x06 0x01
+#define IMX94_PAD_SD1_DATA1__SINC1_EMBIT1                   0x023c 0x0540 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA2__USDHC1_DATA2                   0x0240 0x0544 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA2__SAI4_TX_DATA0                  0x0240 0x0544 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA2__PMIC_READY                     0x0240 0x0544 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA2__NETC_1588MUX_INOUT4            0x0240 0x0544 0x065c 0x03 0x01
+#define IMX94_PAD_SD1_DATA2__FLEXIO2_4_1_FLEXIO4            0x0240 0x0544 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA2__GPIO4_IO12                     0x0240 0x0544 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA2__FLEXPWM3_PWMB3                 0x0240 0x0544 0x06c4 0x06 0x01
+#define IMX94_PAD_SD1_DATA2__SINC1_EMCLK2                   0x0240 0x0544 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA3__USDHC1_DATA3                   0x0244 0x0548 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA3__SAI4_RX_DATA0                  0x0244 0x0548 0x0810 0x01 0x01
+#define IMX94_PAD_SD1_DATA3__NETC_1588MUX_INOUT5            0x0244 0x0548 0x0660 0x03 0x01
+#define IMX94_PAD_SD1_DATA3__FLEXIO2_4_1_FLEXIO5            0x0244 0x0548 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA3__GPIO4_IO13                     0x0244 0x0548 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA3__FLEXPWM3_PWMA2                 0x0244 0x0548 0x06b0 0x06 0x01
+#define IMX94_PAD_SD1_DATA3__SINC1_EMBIT2                   0x0244 0x0548 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA4__USDHC1_DATA4                   0x0248 0x054c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA4__SAI2_RX_DATA0                  0x0248 0x054c 0x07f0 0x01 0x02
+#define IMX94_PAD_SD1_DATA4__NETC_1588MUX_INOUT6            0x0248 0x054c 0x0664 0x03 0x01
+#define IMX94_PAD_SD1_DATA4__FLEXIO2_4_1_FLEXIO6            0x0248 0x054c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA4__GPIO4_IO14                     0x0248 0x054c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA4__FLEXPWM3_PWMB2                 0x0248 0x054c 0x06c0 0x06 0x01
+#define IMX94_PAD_SD1_DATA4__SINC1_EMCLK3                   0x0248 0x054c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA5__USDHC1_DATA5                   0x024c 0x0550 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA5__SAI2_TX_DATA0                  0x024c 0x0550 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA5__USDHC1_RESET_B                 0x024c 0x0550 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA5__NETC_1588MUX_INOUT7            0x024c 0x0550 0x0668 0x03 0x01
+#define IMX94_PAD_SD1_DATA5__FLEXIO2_4_1_FLEXIO7            0x024c 0x0550 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA5__GPIO4_IO15                     0x024c 0x0550 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA5__FLEXPWM3_PWMA1                 0x024c 0x0550 0x06ac 0x06 0x01
+#define IMX94_PAD_SD1_DATA5__SINC1_EMBIT3                   0x024c 0x0550 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA6__USDHC1_DATA6                   0x0250 0x0554 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA6__SAI2_TX_BCLK                   0x0250 0x0554 0x07f8 0x01 0x02
+#define IMX94_PAD_SD1_DATA6__USDHC1_CD_B                    0x0250 0x0554 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA6__NETC_1588MUX_INOUT8            0x0250 0x0554 0x066c 0x03 0x01
+#define IMX94_PAD_SD1_DATA6__FLEXIO2_4_1_FLEXIO8            0x0250 0x0554 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA6__GPIO4_IO16                     0x0250 0x0554 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA6__FLEXPWM3_PWMB1                 0x0250 0x0554 0x06bc 0x06 0x01
+#define IMX94_PAD_SD1_DATA6__SINC1_MOD_CLK0                 0x0250 0x0554 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA7__USDHC1_DATA7                   0x0254 0x0558 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA7__SAI2_RX_SYNC                   0x0254 0x0558 0x07f4 0x01 0x02
+#define IMX94_PAD_SD1_DATA7__USDHC1_WP                      0x0254 0x0558 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA7__NETC_1588MUX_INOUT9            0x0254 0x0558 0x0670 0x03 0x01
+#define IMX94_PAD_SD1_DATA7__FLEXIO2_4_1_FLEXIO9            0x0254 0x0558 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA7__GPIO4_IO17                     0x0254 0x0558 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA7__FLEXPWM3_PWMA0                 0x0254 0x0558 0x06a8 0x06 0x01
+#define IMX94_PAD_SD1_DATA7__SINC1_MOD_CLK1                 0x0254 0x0558 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_STROBE__USDHC1_STROBE                 0x0258 0x055c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_STROBE__SAI2_TX_SYNC                  0x0258 0x055c 0x07fc 0x01 0x02
+#define IMX94_PAD_SD1_STROBE__NETC_1588MUX_INOUT10          0x0258 0x055c 0x0674 0x03 0x01
+#define IMX94_PAD_SD1_STROBE__FLEXIO2_4_1_FLEXIO10          0x0258 0x055c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_STROBE__GPIO4_IO18                    0x0258 0x055c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_STROBE__FLEXPWM3_PWMB0                0x0258 0x055c 0x06b8 0x06 0x01
+#define IMX94_PAD_SD1_STROBE__SINC1_MOD_CLK2                0x0258 0x055c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT               0x025c 0x0560 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_VSELECT__SAI4_MCLK                    0x025c 0x0560 0x0808 0x01 0x01
+#define IMX94_PAD_SD2_VSELECT__USDHC2_WP                    0x025c 0x0560 0x0854 0x02 0x02
+#define IMX94_PAD_SD2_VSELECT__NETC_1588MUX_INOUT10         0x025c 0x0560 0x0674 0x03 0x02
+#define IMX94_PAD_SD2_VSELECT__FLEXIO2_4_1_FLEXIO11         0x025c 0x0560 0x0694 0x04 0x01
+#define IMX94_PAD_SD2_VSELECT__GPIO4_IO19                   0x025c 0x0560 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_VSELECT__EXT_CLK1                     0x025c 0x0560 0x0624 0x06 0x01
+#define IMX94_PAD_SD2_VSELECT__XBAR1_XBAR_INOUT12           0x025c 0x0560 0x088c 0x07 0x02
+
+#define IMX94_PAD_XSPI1_DATA0__XSPI1_A_DATA0                0x0260 0x0564 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA0__SAI2_RX_SYNC                 0x0260 0x0564 0x07f4 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA0__XSPI_SLV_DATA0               0x0260 0x0564 0x0908 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA0__FLEXIO1_3_3_FLEXIO0          0x0260 0x0564 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA0__GPIO7_IO16                   0x0260 0x0564 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA1__XSPI1_A_DATA1                0x0264 0x0568 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA1__SAI2_TX_SYNC                 0x0264 0x0568 0x07fc 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA1__XSPI_SLV_DATA1               0x0264 0x0568 0x090c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA1__FLEXIO1_3_3_FLEXIO1          0x0264 0x0568 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA1__GPIO7_IO17                   0x0264 0x0568 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA2__XSPI1_A_DATA2                0x0268 0x056c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA2__SAI2_TX_DATA0                0x0268 0x056c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA2__XSPI_SLV_DATA2               0x0268 0x056c 0x0910 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA2__FLEXIO1_3_3_FLEXIO2          0x0268 0x056c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA2__GPIO7_IO18                   0x0268 0x056c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA3__XSPI1_A_DATA3                0x026c 0x0570 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA3__SAI2_RX_DATA0                0x026c 0x0570 0x07f0 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA3__SAI2_MCLK                    0x026c 0x0570 0x07e8 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA3__XSPI_SLV_DATA3               0x026c 0x0570 0x0914 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA3__FLEXIO1_3_3_FLEXIO3          0x026c 0x0570 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA3__GPIO7_IO19                   0x026c 0x0570 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA4__XSPI1_A_DATA4                0x0270 0x0574 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA4__SAI4_RX_SYNC                 0x0270 0x0574 0x0814 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA4__XSPI_SLV_DATA4               0x0270 0x0574 0x0918 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA4__FLEXIO1_3_3_FLEXIO4          0x0270 0x0574 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA4__GPIO7_IO20                   0x0270 0x0574 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA5__XSPI1_A_DATA5                0x0274 0x0578 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA5__SAI4_TX_SYNC                 0x0274 0x0578 0x081c 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA5__XSPI_SLV_DATA5               0x0274 0x0578 0x091c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA5__FLEXIO1_3_3_FLEXIO5          0x0274 0x0578 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA5__GPIO7_IO21                   0x0274 0x0578 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA6__XSPI1_A_DATA6                0x0278 0x057c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA6__SAI4_TX_DATA0                0x0278 0x057c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA6__XSPI_SLV_DATA6               0x0278 0x057c 0x0920 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA6__FLEXIO1_3_3_FLEXIO6          0x0278 0x057c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA6__GPIO7_IO22                   0x0278 0x057c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA7__XSPI1_A_DATA7                0x027c 0x0580 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA7__SAI4_RX_DATA0                0x027c 0x0580 0x0810 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA7__SAI4_MCLK                    0x027c 0x0580 0x0808 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA7__XSPI_SLV_DATA7               0x027c 0x0580 0x0924 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA7__FLEXIO1_3_3_FLEXIO7          0x027c 0x0580 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA7__GPIO7_IO23                   0x027c 0x0580 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS                    0x0280 0x0584 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DQS__SAI2_TX_BCLK                   0x0280 0x0584 0x07f8 0x01 0x03
+#define IMX94_PAD_XSPI1_DQS__XSPI_SLV_DQS                   0x0280 0x0584 0x0900 0x03 0x01
+#define IMX94_PAD_XSPI1_DQS__FLEXIO1_3_3_FLEXIO8            0x0280 0x0584 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DQS__GPIO7_IO24                     0x0280 0x0584 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SCLK__XSPI1_A_SCLK                  0x0284 0x0588 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SCLK__SAI4_TX_BCLK                  0x0284 0x0588 0x0818 0x01 0x02
+#define IMX94_PAD_XSPI1_SCLK__XSPI_SLV_CLK                  0x0284 0x0588 0x0904 0x03 0x01
+#define IMX94_PAD_XSPI1_SCLK__FLEXIO1_3_3_FLEXIO9           0x0284 0x0588 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SCLK__GPIO7_IO25                    0x0284 0x0588 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS0_B__XSPI1_A_SS0_B                0x0288 0x058c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                 0x0288 0x058c 0x080c 0x01 0x02
+#define IMX94_PAD_XSPI1_SS0_B__XSPI_SLV_CS                  0x0288 0x058c 0x08fc 0x03 0x01
+#define IMX94_PAD_XSPI1_SS0_B__FLEXIO1_3_3_FLEXIO10         0x0288 0x058c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS0_B__GPIO7_IO26                   0x0288 0x058c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS1_B__XSPI1_A_SS1_B                0x028c 0x0590 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SAI2_RX_BCLK                 0x028c 0x0590 0x07ec 0x01 0x02
+#define IMX94_PAD_XSPI1_SS1_B__FLEXPWM3_PWMX3               0x028c 0x0590 0x0000 0x03 0x00
+#define IMX94_PAD_XSPI1_SS1_B__FLEXIO1_3_3_FLEXIO11         0x028c 0x0590 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS1_B__GPIO7_IO27                   0x028c 0x0590 0x0000 0x05 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC1_MOD_CLK0               0x028c 0x0590 0x0000 0x06 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC_FILTER_GLUE1_BREAK      0x028c 0x0590 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CD_B__USDHC2_CD_B                     0x0290 0x0594 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CD_B__NETC_PINMUX_ETH4_RX_CTL         0x0290 0x0594 0x0634 0x01 0x01
+#define IMX94_PAD_SD2_CD_B__I3C2_SCL                        0x0290 0x0594 0x0720 0x02 0x03
+#define IMX94_PAD_SD2_CD_B__NETC_1588MUX_INOUT9             0x0290 0x0594 0x0670 0x03 0x02
+#define IMX94_PAD_SD2_CD_B__FLEXIO2_4_2_FLEXIO0             0x0290 0x0594 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CD_B__GPIO4_IO20                      0x0290 0x0594 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CD_B__XBAR1_XBAR_INOUT13              0x0290 0x0594 0x0890 0x06 0x02
+#define IMX94_PAD_SD2_CD_B__SINC2_EMCLK0                    0x0290 0x0594 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CLK__USDHC2_CLK                       0x0294 0x0598 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CLK__NETC_PINMUX_ETH4_TX_CLK          0x0294 0x0598 0x0648 0x01 0x01
+#define IMX94_PAD_SD2_CLK__I3C2_SDA                         0x0294 0x0598 0x0724 0x02 0x03
+#define IMX94_PAD_SD2_CLK__NETC_1588MUX_INOUT8              0x0294 0x0598 0x066c 0x03 0x02
+#define IMX94_PAD_SD2_CLK__FLEXIO2_4_2_FLEXIO1              0x0294 0x0598 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CLK__GPIO4_IO21                       0x0294 0x0598 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CLK__OBSERVE0                         0x0294 0x0598 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CLK__SINC2_EMBIT0                     0x0294 0x0598 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CMD__USDHC2_CMD                       0x0298 0x059c 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CMD__NETC_PINMUX_ETH4_TX_CTL          0x0298 0x059c 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR                         0x0298 0x059c 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR_B                       0x0298 0x059c 0x0000 0x03 0x00
+#define IMX94_PAD_SD2_CMD__FLEXIO2_4_2_FLEXIO2              0x0298 0x059c 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CMD__GPIO4_IO22                       0x0298 0x059c 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CMD__OBSERVE1                         0x0298 0x059c 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CMD__SINC2_EMCLK1                     0x0298 0x059c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA0__USDHC2_DATA0                   0x029c 0x05a0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_PINMUX_ETH4_TXD0          0x029c 0x05a0 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA0__CAN2_TX                        0x029c 0x05a0 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_1588MUX_INOUT7            0x029c 0x05a0 0x0668 0x03 0x02
+#define IMX94_PAD_SD2_DATA0__FLEXIO2_4_2_FLEXIO3            0x029c 0x05a0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA0__GPIO4_IO23                     0x029c 0x05a0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA0__OBSERVE2                       0x029c 0x05a0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_DATA0__SINC2_EMBIT1                   0x029c 0x05a0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA1__USDHC2_DATA1                   0x02a0 0x05a4 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA1__NETC_PINMUX_ETH4_TXD1          0x02a0 0x05a4 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA1__CAN2_RX                        0x02a0 0x05a4 0x067c 0x02 0x04
+#define IMX94_PAD_SD2_DATA1__NETC_1588MUX_INOUT6            0x02a0 0x05a4 0x0664 0x03 0x02
+#define IMX94_PAD_SD2_DATA1__FLEXIO2_4_2_FLEXIO4            0x02a0 0x05a4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA1__GPIO4_IO24                     0x02a0 0x05a4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA1__XBAR1_XBAR_INOUT14             0x02a0 0x05a4 0x0894 0x06 0x02
+#define IMX94_PAD_SD2_DATA1__SINC2_EMCLK2                   0x02a0 0x05a4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA2__USDHC2_DATA2                   0x02a4 0x05a8 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_PINMUX_ETH4_TXD2          0x02a4 0x05a8 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA2__MQS2_RIGHT                     0x02a4 0x05a8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_1588MUX_INOUT5            0x02a4 0x05a8 0x0660 0x03 0x02
+#define IMX94_PAD_SD2_DATA2__FLEXIO2_4_2_FLEXIO5            0x02a4 0x05a8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA2__GPIO4_IO25                     0x02a4 0x05a8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA2__XBAR1_XBAR_INOUT15             0x02a4 0x05a8 0x0898 0x06 0x01
+#define IMX94_PAD_SD2_DATA2__SINC2_EMBIT2                   0x02a4 0x05a8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA3__USDHC2_DATA3                   0x02a8 0x05ac 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA3__NETC_PINMUX_ETH4_TXD3          0x02a8 0x05ac 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA3__MQS2_LEFT                      0x02a8 0x05ac 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA3__LPTMR2_ALT0                    0x02a8 0x05ac 0x0780 0x03 0x01
+#define IMX94_PAD_SD2_DATA3__FLEXIO2_4_2_FLEXIO6            0x02a8 0x05ac 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA3__GPIO4_IO26                     0x02a8 0x05ac 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA3__XBAR1_XBAR_INOUT16             0x02a8 0x05ac 0x089c 0x06 0x01
+#define IMX94_PAD_SD2_DATA3__SINC2_EMCLK3                   0x02a8 0x05ac 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_RESET_B__USDHC2_RESET_B               0x02ac 0x05b0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_RESET_B__NETC_PINMUX_ETH4_RXD0        0x02ac 0x05b0 0x0638 0x01 0x01
+#define IMX94_PAD_SD2_RESET_B__NETC_1588MUX_INOUT4          0x02ac 0x05b0 0x065c 0x02 0x02
+#define IMX94_PAD_SD2_RESET_B__LPTMR2_ALT1                  0x02ac 0x05b0 0x0784 0x03 0x01
+#define IMX94_PAD_SD2_RESET_B__FLEXIO2_4_2_FLEXIO7          0x02ac 0x05b0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_RESET_B__GPIO4_IO27                   0x02ac 0x05b0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_RESET_B__XBAR1_XBAR_INOUT17           0x02ac 0x05b0 0x08a0 0x06 0x01
+#define IMX94_PAD_SD2_RESET_B__SINC2_EMBIT3                 0x02ac 0x05b0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO0__USDHC2_WP                      0x02b0 0x05b4 0x0854 0x00 0x03
+#define IMX94_PAD_SD2_GPIO0__NETC_PINMUX_ETH4_RXD1          0x02b0 0x05b4 0x063c 0x01 0x01
+#define IMX94_PAD_SD2_GPIO0__NETC_1588MUX_INOUT3            0x02b0 0x05b4 0x0658 0x03 0x02
+#define IMX94_PAD_SD2_GPIO0__FLEXIO2_4_2_FLEXIO8            0x02b0 0x05b4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO0__GPIO4_IO28                     0x02b0 0x05b4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO0__XBAR1_XBAR_INOUT18             0x02b0 0x05b4 0x08a4 0x06 0x01
+#define IMX94_PAD_SD2_GPIO0__SINC2_MOD_CLK1                 0x02b0 0x05b4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO1__LPTMR2_ALT2                    0x02b4 0x05b8 0x0788 0x00 0x01
+#define IMX94_PAD_SD2_GPIO1__NETC_PINMUX_ETH4_RXD2          0x02b4 0x05b8 0x0640 0x01 0x01
+#define IMX94_PAD_SD2_GPIO1__ECAT_CLK25                     0x02b4 0x05b8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO1__NETC_1588MUX_INOUT2            0x02b4 0x05b8 0x0654 0x03 0x02
+#define IMX94_PAD_SD2_GPIO1__FLEXIO2_4_2_FLEXIO9            0x02b4 0x05b8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO1__GPIO4_IO29                     0x02b4 0x05b8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO1__XBAR1_XBAR_INOUT19             0x02b4 0x05b8 0x08a8 0x06 0x01
+#define IMX94_PAD_SD2_GPIO1__SINC2_MOD_CLK0                 0x02b4 0x05b8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO2__NETC_PINMUX_ETH4_RXD3          0x02b8 0x05bc 0x0644 0x01 0x01
+#define IMX94_PAD_SD2_GPIO2__CAN5_TX                        0x02b8 0x05bc 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO2__NETC_1588MUX_INOUT1            0x02b8 0x05bc 0x0650 0x03 0x02
+#define IMX94_PAD_SD2_GPIO2__FLEXIO2_4_2_FLEXIO10           0x02b8 0x05bc 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO2__GPIO4_IO30                     0x02b8 0x05bc 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO2__XBAR1_XBAR_INOUT20             0x02b8 0x05bc 0x08ac 0x06 0x01
+#define IMX94_PAD_SD2_GPIO2__SINC2_MOD_CLK2                 0x02b8 0x05bc 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO3__NETC_PINMUX_ETH4_RX_CLK        0x02bc 0x05c0 0x0630 0x01 0x01
+#define IMX94_PAD_SD2_GPIO3__CAN5_RX                        0x02bc 0x05c0 0x0688 0x02 0x04
+#define IMX94_PAD_SD2_GPIO3__NETC_1588MUX_INOUT0            0x02bc 0x05c0 0x064c 0x03 0x02
+#define IMX94_PAD_SD2_GPIO3__FLEXIO2_4_2_FLEXIO11           0x02bc 0x05c0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO3__GPIO4_IO31                     0x02bc 0x05c0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO3__XBAR1_XBAR_INOUT21             0x02bc 0x05c0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_GPIO3__SINC_FILTER_GLUE2_BREAK        0x02bc 0x05c0 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C1_SCL__LPI2C1_SCL                      0x02c0 0x05c4 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SCL__I3C1_SCL                        0x02c0 0x05c4 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SCL__LPUART1_DCD_B                   0x02c0 0x05c4 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SCL__TPM2_CH0                        0x02c0 0x05c4 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SCL__SAI1_RX_SYNC                    0x02c0 0x05c4 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SCL__GPIO1_IO0                       0x02c0 0x05c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C1_SDA__LPI2C1_SDA                      0x02c4 0x05c8 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SDA__I3C1_SDA                        0x02c4 0x05c8 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SDA__LPUART1_RIN_B                   0x02c4 0x05c8 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SDA__TPM2_CH1                        0x02c4 0x05c8 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SDA__SAI1_RX_BCLK                    0x02c4 0x05c8 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SDA__GPIO1_IO1                       0x02c4 0x05c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C2_SCL__LPI2C2_SCL                      0x02c8 0x05cc 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR                        0x02c8 0x05cc 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SCL__LPUART2_DCD_B                   0x02c8 0x05cc 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SCL__TPM2_CH2                        0x02c8 0x05cc 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SCL__GPT1_CLK                        0x02c8 0x05cc 0x060c 0x04 0x00
+#define IMX94_PAD_I2C2_SCL__GPIO1_IO2                       0x02c8 0x05cc 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR_B                      0x02c8 0x05cc 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SCL__LPIT1_TRIGGER0                  0x02c8 0x05cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C2_SDA__LPI2C2_SDA                      0x02cc 0x05d0 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SDA__LPI2C1_HREQ                     0x02cc 0x05d0 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SDA__LPUART2_RIN_B                   0x02cc 0x05d0 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SDA__TPM2_CH3                        0x02cc 0x05d0 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SDA__SAI1_MCLK                       0x02cc 0x05d0 0x0620 0x04 0x00
+#define IMX94_PAD_I2C2_SDA__GPIO1_IO3                       0x02cc 0x05d0 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SDA__EWM_OUT_B                       0x02cc 0x05d0 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SDA__LPIT1_TRIGGER1                  0x02cc 0x05d0 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART1_RXD__LPUART1_RX                     0x02d0 0x05d4 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_RXD__S400_UART_RX                   0x02d0 0x05d4 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_RXD__LPSPI2_SIN                     0x02d0 0x05d4 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_RXD__TPM1_CH0                       0x02d0 0x05d4 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_RXD__GPT1_CAPTURE1                  0x02d0 0x05d4 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_RXD__GPIO1_IO4                      0x02d0 0x05d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART1_TXD__LPUART1_TX                     0x02d4 0x05d8 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_TXD__S400_UART_TX                   0x02d4 0x05d8 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_TXD__LPSPI2_PCS0                    0x02d4 0x05d8 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_TXD__TPM1_CH1                       0x02d4 0x05d8 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_TXD__GPT1_COMPARE1                  0x02d4 0x05d8 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_TXD__GPIO1_IO5                      0x02d4 0x05d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART2_RXD__LPUART2_RX                     0x02d8 0x05dc 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_RXD__LPUART1_CTS_B                  0x02d8 0x05dc 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_RXD__LPSPI2_SOUT                    0x02d8 0x05dc 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_RXD__TPM1_CH2                       0x02d8 0x05dc 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_RXD__SAI1_MCLK                      0x02d8 0x05dc 0x0620 0x04 0x01
+#define IMX94_PAD_UART2_RXD__GPIO1_IO6                      0x02d8 0x05dc 0x0000 0x05 0x00
+#define IMX94_PAD_UART2_RXD__GPT1_CLK                       0x02d8 0x05dc 0x060c 0x06 0x01
+#define IMX94_PAD_UART2_RXD__LPIT1_TRIGGER2                 0x02d8 0x05dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART2_TXD__LPUART2_TX                     0x02dc 0x05e0 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_TXD__LPUART1_RTS_B                  0x02dc 0x05e0 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_TXD__LPSPI2_SCK                     0x02dc 0x05e0 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_TXD__TPM1_CH3                       0x02dc 0x05e0 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_TXD__GPIO1_IO7                      0x02dc 0x05e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_PDM_CLK__PDM_CLK                          0x02e0 0x05e4 0x0000 0x00 0x00
+#define IMX94_PAD_PDM_CLK__MQS1_LEFT                        0x02e0 0x05e4 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_CLK__LPTMR1_ALT0                      0x02e0 0x05e4 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_CLK__GPIO1_IO8                        0x02e0 0x05e4 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_CLK__CAN1_TX                          0x02e0 0x05e4 0x0000 0x06 0x00
+#define IMX94_PAD_PDM_CLK__EWM_OUT_B                        0x02e0 0x05e4 0x0000 0x07 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0          0x02e4 0x05e8 0x0610 0x00 0x02
+#define IMX94_PAD_PDM_BIT_STREAM0__MQS1_RIGHT               0x02e4 0x05e8 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1              0x02e4 0x05e8 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK              0x02e4 0x05e8 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPTMR1_ALT1              0x02e4 0x05e8 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__GPIO1_IO9                0x02e4 0x05e8 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__CAN1_RX                  0x02e4 0x05e8 0x0608 0x06 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1          0x02e8 0x05ec 0x0614 0x00 0x03
+#define IMX94_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI             0x02e8 0x05ec 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1              0x02e8 0x05ec 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK              0x02e8 0x05ec 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPTMR1_ALT2              0x02e8 0x05ec 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__GPIO1_IO10               0x02e8 0x05ec 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__EXT_CLK1                 0x02e8 0x05ec 0x0624 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC                   0x02ec 0x05f0 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_DATA1                  0x02ec 0x05f0 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXFS__LPSPI1_PCS0                    0x02ec 0x05f0 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXFS__LPUART2_DTR_B                  0x02ec 0x05f0 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXFS__MQS1_LEFT                      0x02ec 0x05f0 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXFS__GPIO1_IO11                     0x02ec 0x05f0 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_TXFS__EWM_OUT_B                      0x02ec 0x05f0 0x0000 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK                    0x02f0 0x05f4 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART2_CTS_B                   0x02f0 0x05f4 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXC__LPSPI1_SIN                      0x02f0 0x05f4 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART1_DSR_B                   0x02f0 0x05f4 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXC__CAN1_RX                         0x02f0 0x05f4 0x0608 0x04 0x01
+#define IMX94_PAD_SAI1_TXC__GPIO1_IO12                      0x02f0 0x05f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0                  0x02f4 0x05f8 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART2_RTS_B                  0x02f4 0x05f8 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXD0__LPSPI1_SCK                     0x02f4 0x05f8 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART1_DTR_B                  0x02f4 0x05f8 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXD0__CAN1_TX                        0x02f4 0x05f8 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXD0__GPIO1_IO13                     0x02f4 0x05f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0                  0x02f8 0x05fc 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_RXD0__SAI1_MCLK                      0x02f8 0x05fc 0x0620 0x01 0x02
+#define IMX94_PAD_SAI1_RXD0__LPSPI1_SOUT                    0x02f8 0x05fc 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_RXD0__LPUART2_DSR_B                  0x02f8 0x05fc 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_RXD0__MQS1_RIGHT                     0x02f8 0x05fc 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_RXD0__GPIO1_IO14                     0x02f8 0x05fc 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_RXD0__LPIT1_TRIGGER3                 0x02f8 0x05fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_WDOG_ANY__WDOG_ANY                        0x02fc 0x0600 0x0000 0x00 0x00
+#define IMX94_PAD_WDOG_ANY__FCCU_EOUT1                      0x02fc 0x0600 0x0000 0x01 0x00
+#define IMX94_PAD_WDOG_ANY__GPIO1_IO15                      0x02fc 0x0600 0x0000 0x05 0x00
+#endif /* __DTS_IMX94_PINFUNC_H */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx94-power.h linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-power.h
new file mode 100644
index 000000000000..5209afed60ed
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94-power.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_POWER_H
+#define __IMX94_POWER_H
+
+#define IMX94_PD_ANA		0
+#define IMX94_PD_AON		1
+#define IMX94_PD_BBSM		2
+#define IMX94_PD_M71		3
+#define IMX94_PD_CCMSRCGPC	4
+#define IMX94_PD_A55C0		5
+#define IMX94_PD_A55C1		6
+#define IMX94_PD_A55C2		7
+#define IMX94_PD_A55C3		8
+#define IMX94_PD_A55P		9
+#define IMX94_PD_DDR		10
+#define IMX94_PD_DISPLAY	11
+#define IMX94_PD_M70		12
+#define IMX94_PD_HSIO_TOP	13
+#define IMX94_PD_HSIO_WAON	14
+#define IMX94_PD_NETC		15
+#define IMX94_PD_NOC		16
+#define IMX94_PD_NPU		17
+#define IMX94_PD_WAKEUP		18
+
+#define IMX94_PERF_M33		0
+#define IMX94_PERF_M33S		1
+#define IMX94_PERF_WAKEUP	2
+#define IMX94_PERF_M70		3
+#define IMX94_PERF_M71		4
+#define IMX94_PERF_DRAM		5
+#define IMX94_PERF_HSIO		6
+#define IMX94_PERF_NPU		7
+#define IMX94_PERF_NOC		8
+#define IMX94_PERF_A55		9
+#define IMX94_PERF_DISP		10
+
+#endif /* __IMX94_POWER_H */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx94.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94.dtsi
new file mode 100644
index 000000000000..3661ea48d7d2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -0,0 +1,1148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx94-clock.h"
+#include "imx94-pinfunc.h"
+#include "imx94-power.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai1-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai2-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai3-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai4-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		interrupt-parent = <&gic>;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			#msi-cells = <1>;
+			dma-noncoherent;
+			msi-controller;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 0>, <&a55_irqsteer 1>,
+						      <&a55_irqsteer 2>, <&a55_irqsteer 3>,
+						      <&a55_irqsteer 4>, <&a55_irqsteer 5>,
+						      <&a55_irqsteer 6>, <&a55_irqsteer 7>,
+						      <&a55_irqsteer 8>, <&a55_irqsteer 9>,
+						      <&a55_irqsteer 10>, <&a55_irqsteer 11>,
+						      <&a55_irqsteer 12>, <&a55_irqsteer 13>,
+						      <&a55_irqsteer 14>, <&a55_irqsteer 15>,
+						      <&a55_irqsteer 16>, <&a55_irqsteer 17>,
+						      <&a55_irqsteer 18>, <&a55_irqsteer 19>,
+						      <&a55_irqsteer 20>, <&a55_irqsteer 21>,
+						      <&a55_irqsteer 22>, <&a55_irqsteer 23>,
+						      <&a55_irqsteer 24>, <&a55_irqsteer 25>,
+						      <&a55_irqsteer 26>, <&a55_irqsteer 27>,
+						      <&a55_irqsteer 28>, <&a55_irqsteer 29>,
+						      <&a55_irqsteer 30>, <&a55_irqsteer 31>,
+						      <&a55_irqsteer 64>, <&a55_irqsteer 65>,
+						      <&a55_irqsteer 66>, <&a55_irqsteer 67>,
+						      <&a55_irqsteer 68>, <&a55_irqsteer 69>,
+						      <&a55_irqsteer 70>, <&a55_irqsteer 71>,
+						      <&a55_irqsteer 72>, <&a55_irqsteer 73>,
+						      <&a55_irqsteer 74>, <&a55_irqsteer 75>,
+						      <&a55_irqsteer 76>, <&a55_irqsteer 77>,
+						      <&a55_irqsteer 78>, <&a55_irqsteer 79>,
+						      <&a55_irqsteer 80>, <&a55_irqsteer 81>,
+						      <&a55_irqsteer 82>, <&a55_irqsteer 83>,
+						      <&a55_irqsteer 84>, <&a55_irqsteer 85>,
+						      <&a55_irqsteer 86>, <&a55_irqsteer 87>,
+						      <&a55_irqsteer 88>, <&a55_irqsteer 89>,
+						      <&a55_irqsteer 90>, <&a55_irqsteer 91>,
+						      <&a55_irqsteer 92>, <&a55_irqsteer 93>,
+						      <&a55_irqsteer 94>, <&a55_irqsteer 95>;
+			};
+
+			mu10: mailbox@42430000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_I3C2SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 5 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 4 0 0>, <&edma4 5 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 7 0 0>, <&edma2 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 6 0 0>, <&edma4 7 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma4 10 0 FSL_EDMA_RX>, <&edma4 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma4 12 0 FSL_EDMA_RX>, <&edma4 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@425e0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425e0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan4: can@425f0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425f0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@42600000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI2>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 30 0 FSL_EDMA_RX>, <&edma2 29 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI3>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 32 0 FSL_EDMA_RX>, <&edma2 31 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai4: sai@42670000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI4>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 36 0 FSL_EDMA_RX>, <&edma2 35 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 46 0 FSL_EDMA_RX>, <&edma2 45 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma4 39 0 FSL_EDMA_RX>, <&edma4 38 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C5>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 37 0 0>, <&edma2 38 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 30 0 0>, <&edma4 31 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 39 0 0>, <&edma2 40 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 32 0 0>, <&edma4 33 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI5>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 41 0 0>, <&edma2 42 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 34 0 0>, <&edma4 35 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 43 0 0>, <&edma2 44 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 36 0 0>, <&edma4 37 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu11: mailbox@42730000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			edma4: dma-controller@42df0000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42df0000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 128>, <&a55_irqsteer 129>,
+						      <&a55_irqsteer 130>, <&a55_irqsteer 131>,
+						      <&a55_irqsteer 132>, <&a55_irqsteer 133>,
+						      <&a55_irqsteer 134>, <&a55_irqsteer 135>,
+						      <&a55_irqsteer 136>, <&a55_irqsteer 137>,
+						      <&a55_irqsteer 138>, <&a55_irqsteer 139>,
+						      <&a55_irqsteer 140>, <&a55_irqsteer 141>,
+						      <&a55_irqsteer 142>, <&a55_irqsteer 143>,
+						      <&a55_irqsteer 144>, <&a55_irqsteer 145>,
+						      <&a55_irqsteer 146>, <&a55_irqsteer 147>,
+						      <&a55_irqsteer 148>, <&a55_irqsteer 149>,
+						      <&a55_irqsteer 150>, <&a55_irqsteer 151>,
+						      <&a55_irqsteer 152>, <&a55_irqsteer 153>,
+						      <&a55_irqsteer 154>, <&a55_irqsteer 155>,
+						      <&a55_irqsteer 156>, <&a55_irqsteer 157>,
+						      <&a55_irqsteer 158>, <&a55_irqsteer 159>,
+						      <&a55_irqsteer 192>, <&a55_irqsteer 193>,
+						      <&a55_irqsteer 194>, <&a55_irqsteer 195>,
+						      <&a55_irqsteer 196>, <&a55_irqsteer 197>,
+						      <&a55_irqsteer 198>, <&a55_irqsteer 199>,
+						      <&a55_irqsteer 200>, <&a55_irqsteer 201>,
+						      <&a55_irqsteer 202>, <&a55_irqsteer 203>,
+						      <&a55_irqsteer 204>, <&a55_irqsteer 205>,
+						      <&a55_irqsteer 206>, <&a55_irqsteer 207>,
+						      <&a55_irqsteer 208>, <&a55_irqsteer 209>,
+						      <&a55_irqsteer 210>, <&a55_irqsteer 211>,
+						      <&a55_irqsteer 212>, <&a55_irqsteer 213>,
+						      <&a55_irqsteer 214>, <&a55_irqsteer 215>,
+						      <&a55_irqsteer 216>, <&a55_irqsteer 217>,
+						      <&a55_irqsteer 218>, <&a55_irqsteer 219>,
+						      <&a55_irqsteer 220>, <&a55_irqsteer 221>,
+						      <&a55_irqsteer 222>, <&a55_irqsteer 223>;
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>,
+				 <0x28000000 0x0 0x28000000 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@42880000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42880000 0x10000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			lpuart9: serial@42a50000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a50000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma2 51 0 FSL_EDMA_RX>, <&edma2 50 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart10: serial@42a60000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a60000 0x1000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma4 47 0 FSL_EDMA_RX>, <&edma4 46 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart11: serial@42a70000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a70000 0x1000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART11>;
+				clock-names = "ipg";
+				dmas = <&edma2 53 0 FSL_EDMA_RX>, <&edma2 52 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart12: serial@42a80000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a80000 0x1000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART12>;
+				clock-names = "ipg";
+				dmas = <&edma4 49 0 FSL_EDMA_RX>, <&edma4 48 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu12: mailbox@42ac0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ac0000 0x10000>;
+				interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu13: mailbox@42ae0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ae0000 0x10000>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu14: mailbox@42b00000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b00000 0x10000>;
+				interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu15: mailbox@42b20000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b20000 0x10000>;
+				interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu16: mailbox@42b40000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b40000 0x10000>;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu17: mailbox@42b60000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b60000 0x10000>;
+				interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 36 26>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>,
+				      <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 108 32>;
+		};
+
+		gpio6: gpio@43860000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43860000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 66 32>;
+		};
+
+		gpio7: gpio@43870000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43870000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx94-edma3", "fsl,imx93-edma3";
+				reg = <0x44000000 0x210000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <32>;
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx94-sysctr-timer", "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_I3C1SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C1>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 0>, <&edma1 17 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 0>, <&edma1 19 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI1>, <&dummy>,
+					<&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx94-adc", "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			a55_irqsteer: interrupt-controller@446a0000 {
+				compatible = "fsl,imx94-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x446a0000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <960>;
+			};
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wdog3: watchdog@49220000 {
+				compatible = "fsl,imx94-wdt", "fsl,imx93-wdt";
+				reg = <0x49220000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				fsl,ext-reset-output;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx943-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx943-evk.dts
new file mode 100644
index 000000000000..cc8f3e6a1789
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx943.dtsi"
+
+/ {
+	compatible = "fsl,imx943-evk", "fsl,imx94";
+	model = "NXP i.MX943 EVK board";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX94_PAD_UART1_TXD__LPUART1_TX		0x31e
+			IMX94_PAD_UART1_RXD__LPUART1_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CD_B__GPIO4_IO20		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: usdhc2regvmmcgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_RESET_B__GPIO4_IO27	0x31e
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <4>;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx943.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx943.dtsi
new file mode 100644
index 000000000000..45b8da758e87
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx94.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 514f2429dcbc..9f4d0899a94d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -136,6 +136,15 @@
 		startup-delay-us = <20000>;
 	};
 
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vcc_12v: regulator-vcc-12v {
 		compatible = "regulator-fixed";
 		regulator-max-microvolt = <12000000>;
@@ -525,6 +534,13 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "disabled";
+};
+
 &sai1 {
 	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
 			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
@@ -558,17 +574,17 @@
 &scmi_iomuxc {
 	pinctrl_emdio: emdiogrp {
 		fsl,pins = <
-			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x57e
-			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x97e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
 		>;
 	};
 
 	pinctrl_enetc0: enetc0grp {
 		fsl,pins = <
-			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e
-			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e
-			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e
-			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
 			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
 			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
 			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
@@ -582,10 +598,10 @@
 
 	pinctrl_enetc1: enetc1grp {
 		fsl,pins = <
-			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x57e
-			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x57e
-			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x57e
-			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x57e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
 			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
 			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
 			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
@@ -1023,6 +1039,13 @@
 	status = "okay";
 };
 
+&usb2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
 &usb3 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
new file mode 100644
index 000000000000..808a9fe3ebb2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95-19x19-evk.dts"
+
+/ {
+	sof_cpu: cm7-cpu@80000000 {
+		compatible = "fsl,imx95-cm7-sof";
+		reg = <0x0 0x80000000 0x0 0x6100000>;
+		reg-names = "sram";
+		memory-region = <&adma_res>;
+		memory-region-names = "dma";
+		mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
+		mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+
+		sai3_cpu: port {
+			sai3_cpu_ep: endpoint {
+				remote-endpoint = <&wm8962_ep>;
+			};
+		};
+	};
+
+	reserved-memory {
+		adma_res: memory@86100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x86100000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	sof-sound {
+		compatible = "audio-graph-card2";
+		links = <&sai3_cpu>;
+		label = "audio";
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		widgets = "Headphone", "Headphones",
+			  "Microphone", "Headset Mic";
+		routing = "Headphones", "HPOUTL",
+			  "Headphones", "HPOUTR",
+			  "Headset Mic", "MICBIAS",
+			  "IN3R", "Headset Mic",
+			  "IN1R", "Headset Mic";
+	};
+
+	sound-wm8962 {
+		status = "disabled";
+	};
+
+};
+
+&edma2 {
+	/* channels 30 and 31 reserved for FW usage */
+	dma-channel-mask = <0xc0000000>, <0x0>;
+};
+
+&sai3 {
+	status = "disabled";
+};
+
+&wm8962 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>;
+
+	port {
+		wm8962_ep: endpoint {
+			bitclock-master;
+			frame-master;
+			remote-endpoint = <&sai3_cpu_ep>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 25ac331f0318..d7d845231312 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -145,6 +145,15 @@
 		off-on-delay-us = <12000>;
 	};
 
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&i2c7_pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
@@ -417,6 +426,13 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcie0>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	pinctrl-names = "default";
@@ -425,6 +441,13 @@
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
 &sai1 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -461,6 +484,13 @@
 	status = "okay";
 };
 
+&usb2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
 &usb3 {
 	status = "okay";
 };
@@ -536,17 +566,17 @@
 &scmi_iomuxc {
 	pinctrl_emdio: emdiogrp{
 		fsl,pins = <
-			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x57e
-			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x97e
+			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
 		>;
 	};
 
 	pinctrl_enetc0: enetc0grp {
 		fsl,pins = <
-			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e
-			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e
-			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e
-			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
 			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
 			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
 			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
new file mode 100644
index 000000000000..5b6b2bb80b28
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx95-tqma9596sa.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2";
+	compatible = "tq,imx95-tqma9596sa-mb-smarc-2", "tq,imx95-tqma9596sa", "fsl,imx95";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &scmi_bbm;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm3 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				/* TODO: LVDS0 out */
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+				/* TODO: LVDS1 out */
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		audio-cpu = <&sai3>;
+	};
+};
+
+&enetc_port0 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	status = "okay";
+};
+
+&expander2 {
+	pcie1-clk-en-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE1_CLK_EN";
+	};
+
+	pcie2-clk-en-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE2_CLK_EN";
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	status = "disabled";
+};
+
+/* SER3 */
+&lpuart5 {
+	status = "okay";
+};
+
+/* SER1 */
+&lpuart7 {
+	status = "okay";
+};
+
+/* SER2 */
+&lpuart8 {
+	status = "okay";
+};
+
+/* X44 mPCIe */
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 1>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* X22 PCIe x1 socket */
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 0>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai5 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI5>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+};
+
+/* X4 */
+&usb2 {
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	/* DR not yet supported */
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+
+/* X16 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdvmmc>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
new file mode 100644
index 000000000000..180124cc5bce
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, size : 2048 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			alloc-ranges = <0 0x80000000 0 0x80000000>;
+			linux,cma-default;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Controlled by system manager */
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SDIO_PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&enetc_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	phy-handle = <&ethphy3>;
+	phy-mode = "rgmii-id";
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO7", "GPIO8",
+			  "", "GPIO9", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "SLEEP", "GPIO5",
+			  "", "", "GPIO6", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
+	};
+
+	eeprom_smarc: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf85063>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	m24c64: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @50) */
+	eeprom@58 {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x58>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @54) */
+	eeprom@5c {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5c>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0441";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+
+	imu@6b {
+		compatible = "st,ism330dhcx";
+		reg = <0x6b>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
+	};
+
+	/* D23 */
+	expander2: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		vcc-supply = <&reg_1v8>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO4", "LCD0_BLKT_EN", "LCD0_VDD_EN", "LCD1_BLKT_EN",
+				  "LCD1_VDD_EN", "ENET1_RESET#", "ENET2_RESET#", "GBE0_SDP_DIR",
+				  "GBE1_SDP_DIR", "PCIE1_RST#", "PCIE2_RST#", "DP_BRIDGE_EN",
+				  "HUB_RST#", "QSPI_RESET#", "PCIE1_CLK_EN", "PCIE2_CLK_EN";
+	};
+
+	/* D21 */
+	expander1: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		vcc-supply = <&reg_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		gpio-line-names = "GPIO10", "GPIO11", "GPIO12", "GPIO13",
+				  "CHG_PRSNT#", "CHARGING", "LID", "BATLOW#",
+				  "TEMP_EVENT#", "PGOOD_ARM", "PGOOD_SOC", "PCIE_WAKE#_1V8",
+				  "GPIO0", "GPIO1", "GPIO2", "GPIO3";
+	};
+};
+
+/* I2C_CAM0 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 11 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					/* TODO: DSI out */
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+/* I2C_CAM1 */
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-1 = <&pinctrl_lpi2c4>;
+	status = "okay";
+};
+
+/* I2C_LCD */
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-1 = <&pinctrl_lpi2c6>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* SER3 */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+};
+
+/* SER1 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+/* SER2 */
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart8>;
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy0>;
+		reset-gpios = <&expander2 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	ethphy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy3>;
+		reset-gpios = <&expander2 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&scmi_bbm {
+	linux,code = <KEY_POWER>;
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13				0x1100>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14				0x1100>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23				0x51e>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24				0x51e>;
+	};
+
+	pinctrl_expander1: expander1grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27				0x1100>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x1300>,
+			   <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x31e>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX		0x31e>,
+			   <IMX95_PAD_CCM_CLKO4__CAN3_RX		0x1300>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x11e>,
+			   <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x11e>,
+			   <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0	0x11e>,
+			   <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1	0x11e>,
+			   <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2	0x11e>,
+			   <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3	0x11e>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x111e>,
+			   <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13		0x111e>,
+			   <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11		0x111e>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18		0x1100>,
+			   <IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19		0x111e>,
+			   <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22		0x111e>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x4000191e>,
+			   <IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x4000191e>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA			0x4000191e>,
+			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL			0x4000191e>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO31__LPI2C4_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO03__LPI2C6_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7		0x51e>,
+			   <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8		0x51e>,
+			   <IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e>,
+			   <IMX95_PAD_GPIO_IO10__LPSPI3_SOUT		0x51e>,
+			   <IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x1300>,
+			   <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e>,
+			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B	0x1300>,
+			   <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B	0x31e>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO01__LPUART5_RX			0x1300>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO36__LPUART7_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO37__LPUART7_RX			0x1300>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO13__LPUART8_RX			0x1300>,
+			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B			0x31e>,
+			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B			0x1300>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x51e>,
+			   <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x51e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27			0x1100>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO17__SAI3_MCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0		0x1300>,
+			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x51e>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0		0x1300>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x11e>;
+	};
+
+	pinctrl_tc9595: tc9595grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25			0x1500>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO04__TPM3_CH0			0x51e>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0			0x51e>;
+	};
+
+	pinctrl_tpm5: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0			0x51e>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x51e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x31e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x131e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x131e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x131e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x131e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x13fe>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x13fe>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x13fe>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x13fe>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
index 59f057ba6fa7..5aecdd9b62ff 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -470,6 +470,13 @@
 		};
 	};
 
+	usbphynop: usbphynop {
+		compatible = "usb-nop-xceiv";
+		clocks = <&scmi_clk IMX95_CLK_HSIO>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -1621,6 +1628,29 @@
 			status = "disabled";
 		};
 
+		usb2: usb@4c200000 {
+			compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x0 0x4c200000 0x0 0x200>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			iommus = <&smmu 0xf>;
+			phys = <&usbphynop>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,usbmisc = <&usbmisc 0>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@4c200200 {
+			compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x0 0x4c200200 0x0 0x200>,
+			      <0x0 0x4c010014 0x0 0x04>;
+			#index-cells = <1>;
+		};
+
 		pcie0: pcie@4c300000 {
 			compatible = "fsl,imx95-pcie";
 			reg = <0 0x4c300000 0 0x10000>,
@@ -1678,7 +1708,7 @@
 			      <0x9 0 1 0>;
 			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
 			num-lanes = <1>;
-			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
index ba53ec622f0b..4587e1cb8835 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
@@ -153,6 +153,11 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	pca85073a: rtc@51 {
+		compatible = "nxp,pca85073a";
+		reg = <0x51>;
+	};
 };
 
 &i2c2 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
new file mode 100644
index 000000000000..478cc8ede05e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc1;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds0>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	off-on-delay-us = <200000>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdvmmc>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
new file mode 100644
index 000000000000..2d0a329c2fa5
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/delete-node/ &encoder_rpc;
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, minimal size : 1024 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_tqma8xxs_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SD1_VMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vqmmc: regulator-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		m4_reserved: m4@88000000 {
+			no-map;
+			reg = <0 0x88000000 0 0x8000000>;
+			status = "disabled";
+		};
+
+		vdev0vring0: vdev0vring0@90000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev0vring1: vdev0vring1@90008000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring0: vdev1vring0@90010000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring1: vdev1vring1@90018000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		rsc_table: rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@92100000 {
+			reg = <0 0x92100000 0 0x700000>;
+			no-map;
+		};
+	};
+
+};
+
+/* TQMa8XxS only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio0 24 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lsio_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_fangpio>, <&pinctrl_smarc_mngtpio>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LID", "SLEEP", "CHARGING#", "CHGPRSNT#",
+			  "BATLOW#", "", "", "",
+			  "", "SMARC_GPIO6", "SMARC_GPIO5", "",
+			  "PHY3 RST#", "", "", "SPI0_CS0",
+			  "", "SPI0_CS1", "", "";
+};
+
+&lsio_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	gpio-line-names = "LCD1_BLKT_EN", "LCD1_VDD_EN", "LCD0_BLKT_EN", "LCD0_VDD_EN",
+			  "SMARC_GPIO0", "SMARC_GPIO1", "SMARC_GPIO2", "",
+			  "SMARC_GPIO3", "SMARC_GPIO8", "SMARC_GPIO7", "SMARC_GPIO10",
+			  "SMARC_GPIO9", "SMARC_GPIO4", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "RTC_INT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "PHY0_RST#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "PCIE_PERST#", "", "PCIE_WAKE#", "USB_OTG1_PWR",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "SDIO_PWR_EN",
+			  "", "SDIO_WP", "SDIO_CD#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	pinctrl-1 = <&pinctrl_lpi2c0_gpio>;
+	scl-gpios = <&lsio_gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	rtc1: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		quartz-load-femtofarads = <7000>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic0_thermal: pmic0-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vmmc>;
+	vqmmc-supply = <&reg_vqmmc>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	/* NOTE: CD / WP and VMMC support depends on mainboard */
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_lvds0: backlight-lvds0grp {
+		fsl,pins = <IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02	0x00000021>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021>,
+			   <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021>,
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000040>,
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x00000040>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14		0x00000040>,
+			   <IMX8QXP_UART1_CTS_B_LSIO_GPIO0_IO24		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x0000004d>,
+			   <IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0000004d>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiogrp {
+		fsl,pins = /* SMARC_GPIO0 / CAM0_PWR# */
+			   <IMX8QXP_SPI0_SCK_LSIO_GPIO1_IO04	0x00000021>,
+			   /* SMARC_GPIO1 / CAM1_PWR# */
+			   <IMX8QXP_SPI0_SDI_LSIO_GPIO1_IO05	0x00000021>,
+			   /* SMARC_GPIO2 / CAM0_RST# */
+			   <IMX8QXP_SPI0_SDO_LSIO_GPIO1_IO06	0x00000021>,
+			   /* SMARC_GPIO3 / CAM1_RST# */
+			   <IMX8QXP_SPI0_CS0_LSIO_GPIO1_IO08	0x00000021>,
+			   /* SMARC_GPIO4 / HDA_RST# */
+			   <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000021>,
+			   /* SMARC_GPIO7 */
+			   <IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10	0x00000021>,
+			   /* SMARC_GPIO8 */
+			   <IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09	0x00000021>,
+			   /* SMARC_GPIO9 */
+			   <IMX8QXP_ADC_IN2_LSIO_GPIO1_IO12	0x00000021>,
+			   /* SMARC_GPIO10 */
+			   <IMX8QXP_ADC_IN3_LSIO_GPIO1_IO11	0x00000021>;
+	};
+
+	pinctrl_smarc_fangpio: smarcfangpiogrp {
+		fsl,pins = /* SMARC_GPIO5 */
+			   <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22	0x00000021>,
+			   /* SMARC_GPIO6 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21	0x00000021>;
+	};
+
+	pinctrl_smarc_mngtpio: smarcmngtgpiogrp {
+		fsl,pins = /* SMARC BATLOW# */
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16		0x00000021>,
+			   /* SMARC SLEEP */
+			   <IMX8QXP_SPI3_SCK_LSIO_GPIO0_IO13		0x00000021>,
+			   /* SMARC CHGPRSNT# */
+			   <IMX8QXP_SPI3_SDI_LSIO_GPIO0_IO15		0x00000021>,
+			   /* SMARC CHARGING# */
+			   <IMX8QXP_SPI3_SDO_LSIO_GPIO0_IO14		0x00000021>,
+			   /* SMARC LID */
+			   <IMX8QXP_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12	0x00000021>;
+	};
+
+	pinctrl_lvds0: lbdpanel0grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03		0x00000021>;
+	};
+
+	pinctrl_lvds1: lbdpanel1grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01		0x00000021>;
+	};
+
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c0_gpio: lpi2c0gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08	0x00000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07	0x00000021>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX		0x06000020>,
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX		0x06000020>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B	0x06000020>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_ADMA_UART3_RX		0x06000020>,
+			   <IMX8QXP_SCU_GPIO0_01_ADMA_UART3_TX		0x06000020>;
+	};
+
+	pinctrl_i2c0_mipi_lvds0: mipi-lvds0-i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_i2c0_gpio_mipi_lvds0: mipi-lvds0-i2c0-gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25	0x0000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26	0x0000021>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_pwm_mipi_lvds0: mipi-lvds0-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_pwm_mipi_lvds1: mipi-lvds1-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x00000021>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = /* PD + PDRV Low + INOUT - MEK has 0x0600004c */
+			   <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI		0x06000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO		0x06000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK		0x06000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000040>,
+			   <IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC		0x06000040>,
+			   <IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000040>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/Makefile
index d39cfb723f5b..33f6d01266b1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/Makefile
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
 				socfpga_agilex5_socdk.dtb \
+				socfpga_agilex5_socdk_nand.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 1235ba5a9865..a77a504effea 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -114,11 +114,13 @@
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
@@ -457,6 +459,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 16>, <&pdma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -471,6 +475,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 20>, <&pdma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 51c6e19e40b8..7d9394a04302 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -222,9 +222,9 @@
 			status = "disabled";
 		};
 
-		gpio0: gpio@ffc03200 {
+		gpio0: gpio@10c03200 {
 			compatible = "snps,dw-apb-gpio";
-			reg = <0xffc03200 0x100>;
+			reg = <0x10c03200 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			resets = <&rst GPIO0_RESET>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index c533e5a3a610..d3b913b7902c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -15,6 +15,26 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 11 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
 };
 
 &gpio1 {
@@ -25,6 +45,37 @@
 	clock-frequency = <25000000>;
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "root";
+				reg = <0x04200000 0x0be00000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
new file mode 100644
index 000000000000..38a582ef86b4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK NAND daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-nand", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <8>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0xffe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/armada-7040-db.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 2b5e45d2c5a6..3add6506ff20 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -124,7 +124,6 @@
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/armada-8040-db.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 9d45e881a97d..21ecb9c12505 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -122,7 +122,6 @@
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -131,7 +130,6 @@
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index be56a2336265..50e9e0724828 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -209,7 +209,6 @@
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/Makefile
index 58484e830063..f68865d06edd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
@@ -64,6 +65,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393216.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393217.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb
@@ -107,4 +110,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
 DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
 DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
 DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@
 DTC_FLAGS_mt8395-radxa-nio-12l := -@
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
index 5fafa842d312..dca4e5c3d8e2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -60,7 +60,6 @@
 			};
 
 			mt6357_vfe28_reg: ldo-vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -75,7 +74,6 @@
 			};
 
 			mt6357_vrf18_reg: ldo-vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -83,7 +81,6 @@
 			};
 
 			mt6357_vrf12_reg: ldo-vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -112,7 +109,6 @@
 			};
 
 			mt6357_vcn28_reg: ldo-vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -120,7 +116,6 @@
 			};
 
 			mt6357_vcn18_reg: ldo-vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -142,7 +137,6 @@
 			};
 
 			mt6357_vcamio_reg: ldo-vcamio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -175,7 +169,6 @@
 			};
 
 			mt6357_vaux18_reg: ldo-vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -183,7 +176,6 @@
 			};
 
 			mt6357_vaud28_reg: ldo-vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -191,7 +183,6 @@
 			};
 
 			mt6357_vio28_reg: ldo-vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -199,7 +190,6 @@
 			};
 
 			mt6357_vio18_reg: ldo-vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index 7b10f9c59819..467d8a4c2aa7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -20,6 +20,8 @@
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -298,7 +300,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
new file mode 100644
index 000000000000..982bc95c471c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
@@ -0,0 +1,1356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Copyright (c) 2025 Collabora Ltd
+ */
+
+#ifndef __MT6893_PINFUNC_H
+#define __MT6893_PINFUNC_H
+
+#include "mt65xx.h"
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_SPI6_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_I2S5_MCK (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_PWM_0 (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_MD_INT0 (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 5)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_SPI6_CSB (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_I2S5_BCK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_PWM_1 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 5)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_SPI6_MI (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_I2S5_LRCK (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_PWM_2 (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 5)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_SPI6_MO (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_I2S5_DO (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_PWM_3 (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_CLKM0 (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 5)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_SPI7_A_CLK (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S2_MCK (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_PCM1_DI (MTK_PIN_NO(4) | 4)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 5)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CSB (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S2_BCK (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 5)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_SPI7_A_MI (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S2_LRCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_DMIC_CLK (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 5)
+#define PINMUX_GPIO6__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(6) | 6)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S2_DI (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_DMIC_DAT (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_PCM1_DO0 (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 5)
+#define PINMUX_GPIO7__FUNC_WIFI_TXD (MTK_PIN_NO(7) | 6)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SRCLKENAI1 (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_I2S2_DI2 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_KPCOL2 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_PCM1_DO1 (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_CLKM1 (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_CONN_BT_TXD (MTK_PIN_NO(8) | 6)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SRCLKENAI0 (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_KPROW2 (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_PCM1_DO2 (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_CLKM3 (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_CMMCLK4 (MTK_PIN_NO(9) | 6)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_MSDC1_CLK_A (MTK_PIN_NO(10) | 1)
+#define PINMUX_GPIO10__FUNC_SPI4_B_CLK (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_I2S8_MCK (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_MD_INT0 (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_TP_GPIO0_AO (MTK_PIN_NO(10) | 6)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_MSDC1_CMD_A (MTK_PIN_NO(11) | 1)
+#define PINMUX_GPIO11__FUNC_SPI4_B_CSB (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_I2S8_BCK (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_LCM1_RST (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_TP_GPIO1_AO (MTK_PIN_NO(11) | 6)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_MSDC1_DAT3_A (MTK_PIN_NO(12) | 1)
+#define PINMUX_GPIO12__FUNC_SPI4_B_MI (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_I2S8_LRCK (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_DMIC1_CLK (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_TP_GPIO2_AO (MTK_PIN_NO(12) | 6)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_MSDC1_DAT0_A (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_SPI4_B_MO (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_I2S8_DI (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_DMIC1_DAT (MTK_PIN_NO(13) | 4)
+#define PINMUX_GPIO13__FUNC_ANT_SEL10 (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_TP_GPIO3_AO (MTK_PIN_NO(13) | 6)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_MSDC1_DAT2_A (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_SPI5_C_CLK (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_I2S9_MCK (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_IDDIG (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_ANT_SEL11 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO4_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_MSDC1_DAT1_A (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPI5_C_CSB (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_I2S9_BCK (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_ANT_SEL12 (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO5_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_SPI5_C_MI (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_I2S9_LRCK (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_KPCOL2 (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO6_AO (MTK_PIN_NO(16) | 6)
+#define PINMUX_GPIO16__FUNC_DBG_MON_A30 (MTK_PIN_NO(16) | 7)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_SRCLKENAI0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SPI5_C_MO (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_I2S9_DO (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_KPROW2 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO7_AO (MTK_PIN_NO(17) | 6)
+#define PINMUX_GPIO17__FUNC_DBG_MON_A31 (MTK_PIN_NO(17) | 7)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DP_TX_HPD (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SPI4_C_MI (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_SPI1_B_MI (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_ANT_SEL10 (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_SRCLKENAI1 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SPI4_C_MO (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_SPI1_B_MO (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_ANT_SEL11 (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_SRCLKENAI0 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_C_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_SPI1_B_CLK (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_PWM_3 (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_ANT_SEL12 (MTK_PIN_NO(20) | 5)
+#define PINMUX_GPIO20__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(20) | 6)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_DP_TX_HPD (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI4_C_CSB (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_SPI1_B_CSB (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_I2S7_MCK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_I2S9_MCK (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 6)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_LCM1_RST (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI0_C_CLK (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_SPI7_B_CLK (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_I2S7_BCK (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_I2S9_BCK (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_SCL13 (MTK_PIN_NO(22) | 6)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_DSI1_TE (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_SPI0_C_CSB (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_SPI7_B_CSB (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_I2S7_LRCK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_I2S9_LRCK (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_SDA13 (MTK_PIN_NO(23) | 6)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_SRCLKENAI1 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SPI0_C_MI (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SPI7_B_MI (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_I2S6_DI (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_I2S8_DI (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_SCL_6306 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI0 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_SPI0_C_MO (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SPI7_B_MO (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_I2S7_DO (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_I2S9_DO (MTK_PIN_NO(25) | 5)
+#define PINMUX_GPIO25__FUNC_SDA_6306 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_PWM_2 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_CLKM0 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_PWM_3 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_CLKM1 (MTK_PIN_NO(27) | 2)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_PWM_0 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_CLKM2 (MTK_PIN_NO(28) | 2)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_PWM_1 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_CLKM3 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_DSI1_TE (MTK_PIN_NO(29) | 3)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_PWM_2 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_CLKM0 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_LCM1_RST (MTK_PIN_NO(30) | 3)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_I2S3_MCK (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_I2S1_MCK (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_I2S5_MCK (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_SRCLKENAI0 (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_I2S0_MCK (MTK_PIN_NO(31) | 5)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_I2S3_BCK (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_I2S1_BCK (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_I2S5_BCK (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_PCM0_CLK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_I2S0_BCK (MTK_PIN_NO(32) | 5)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_I2S3_LRCK (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_I2S1_LRCK (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_I2S5_LRCK (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_PCM0_SYNC (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_I2S0_LRCK (MTK_PIN_NO(33) | 5)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_I2S0_DI (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_I2S2_DI (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_I2S2_DI2 (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_I2S0_DI_A (MTK_PIN_NO(34) | 5)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_I2S3_DO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_I2S1_DO (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_I2S5_DO (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 4)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_SPI5_A_CLK (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_DMIC1_CLK (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_IDDIG (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_MD_URXD0 (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_UCTS0 (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_URXD1 (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_DBG_MON_A0 (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_SPI5_A_CSB (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_DMIC1_DAT (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_USB_DRVVBUS (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_MD_UTXD0 (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_URTS0 (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_UTXD1 (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DBG_MON_A1 (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPI5_A_MI (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_DMIC_CLK (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_DSI1_TE (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_MD_URXD1 (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_URXD0 (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_UCTS1 (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DBG_MON_A2 (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_SPI5_A_MO (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_DMIC_DAT (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_LCM1_RST (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_MD_UTXD1 (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_UTXD0 (MTK_PIN_NO(39) | 5)
+#define PINMUX_GPIO39__FUNC_URTS1 (MTK_PIN_NO(39) | 6)
+#define PINMUX_GPIO39__FUNC_DBG_MON_A3 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_DISP_PWM (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_DBG_MON_A6 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_DSI_TE (MTK_PIN_NO(41) | 1)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_LCM_RST (MTK_PIN_NO(42) | 1)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(43) | 2)
+#define PINMUX_GPIO43__FUNC_SCL_6306 (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_ADSP_URXD0 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_PTA_RXD (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_SSPM_URXD_AO (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_A4 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 2)
+#define PINMUX_GPIO44__FUNC_SDA_6306 (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_ADSP_UTXD0 (MTK_PIN_NO(44) | 4)
+#define PINMUX_GPIO44__FUNC_PTA_TXD (MTK_PIN_NO(44) | 5)
+#define PINMUX_GPIO44__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(44) | 6)
+#define PINMUX_GPIO44__FUNC_DBG_MON_A5 (MTK_PIN_NO(44) | 7)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_APU_JTAG_TDI (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(45) | 5)
+#define PINMUX_GPIO45__FUNC_LVTS_SCK (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_APU_JTAG_TMS (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_LVTS_SDI (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_APU_JTAG_TDO (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_LVTS_SCF (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_APU_JTAG_TRST (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(48) | 5)
+#define PINMUX_GPIO48__FUNC_LVTS_FOUT (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(49) | 2)
+#define PINMUX_GPIO49__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_APU_JTAG_TCK (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(49) | 5)
+#define PINMUX_GPIO49__FUNC_LVTS_SDO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_LVTS_26M (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_MSDC1_CLK (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_PCM1_CLK (MTK_PIN_NO(51) | 2)
+#define PINMUX_GPIO51__FUNC_VPU_UDI_TCK (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_UDI_TCK (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(51) | 5)
+#define PINMUX_GPIO51__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(51) | 6)
+#define PINMUX_GPIO51__FUNC_JTCK_SEL3 (MTK_PIN_NO(51) | 7)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_MSDC1_CMD (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_PCM1_SYNC (MTK_PIN_NO(52) | 2)
+#define PINMUX_GPIO52__FUNC_VPU_UDI_TMS (MTK_PIN_NO(52) | 3)
+#define PINMUX_GPIO52__FUNC_UDI_TMS (MTK_PIN_NO(52) | 4)
+#define PINMUX_GPIO52__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(52) | 5)
+#define PINMUX_GPIO52__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(52) | 6)
+#define PINMUX_GPIO52__FUNC_JTMS_SEL3 (MTK_PIN_NO(52) | 7)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_MSDC1_DAT3 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_PCM1_DI (MTK_PIN_NO(53) | 2)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_MSDC1_DAT0 (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_PCM1_DO0 (MTK_PIN_NO(54) | 2)
+#define PINMUX_GPIO54__FUNC_VPU_UDI_TDI (MTK_PIN_NO(54) | 3)
+#define PINMUX_GPIO54__FUNC_UDI_TDI (MTK_PIN_NO(54) | 4)
+#define PINMUX_GPIO54__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(54) | 5)
+#define PINMUX_GPIO54__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(54) | 6)
+#define PINMUX_GPIO54__FUNC_JTDI_SEL3 (MTK_PIN_NO(54) | 7)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_MSDC1_DAT2 (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_PCM1_DO2 (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_VPU_UDI_NTRST (MTK_PIN_NO(55) | 3)
+#define PINMUX_GPIO55__FUNC_UDI_NTRST (MTK_PIN_NO(55) | 4)
+#define PINMUX_GPIO55__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(55) | 5)
+#define PINMUX_GPIO55__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(55) | 6)
+#define PINMUX_GPIO55__FUNC_JTRSTN_SEL3 (MTK_PIN_NO(55) | 7)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_MSDC1_DAT1 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_PCM1_DO1 (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_VPU_UDI_TDO (MTK_PIN_NO(56) | 3)
+#define PINMUX_GPIO56__FUNC_UDI_TDO (MTK_PIN_NO(56) | 4)
+#define PINMUX_GPIO56__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(56) | 5)
+#define PINMUX_GPIO56__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(56) | 6)
+#define PINMUX_GPIO56__FUNC_JTDO_SEL3 (MTK_PIN_NO(56) | 7)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_DBG_MON_A14 (MTK_PIN_NO(57) | 7)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_DBG_MON_A15 (MTK_PIN_NO(58) | 7)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_MIPI_M_SCLK (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_DBG_MON_A17 (MTK_PIN_NO(59) | 7)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_MIPI_M_SDATA (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_DBG_MON_A18 (MTK_PIN_NO(60) | 7)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(61) | 1)
+#define PINMUX_GPIO61__FUNC_DBG_MON_A16 (MTK_PIN_NO(61) | 7)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_DIGRF_IRQ (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_BPI_BUS0 (MTK_PIN_NO(63) | 1)
+#define PINMUX_GPIO63__FUNC_DBG_MON_A19 (MTK_PIN_NO(63) | 7)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_BPI_BUS1 (MTK_PIN_NO(64) | 1)
+#define PINMUX_GPIO64__FUNC_DBG_MON_A20 (MTK_PIN_NO(64) | 7)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_BPI_BUS2 (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_DBG_MON_A21 (MTK_PIN_NO(65) | 7)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_BPI_BUS3 (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_DBG_MON_A22 (MTK_PIN_NO(66) | 7)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_BPI_BUS4 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_BPI_BUS5 (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_BPI_BUS6 (MTK_PIN_NO(69) | 1)
+#define PINMUX_GPIO69__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(69) | 2)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_BPI_BUS7 (MTK_PIN_NO(70) | 1)
+#define PINMUX_GPIO70__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(70) | 2)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_BPI_BUS8 (MTK_PIN_NO(71) | 1)
+#define PINMUX_GPIO71__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(71) | 2)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_BPI_BUS9 (MTK_PIN_NO(72) | 1)
+#define PINMUX_GPIO72__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(72) | 2)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_BPI_BUS10 (MTK_PIN_NO(73) | 1)
+#define PINMUX_GPIO73__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(73) | 2)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 1)
+#define PINMUX_GPIO74__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 2)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 2)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 1)
+#define PINMUX_GPIO76__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 2)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 2)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 1)
+#define PINMUX_GPIO78__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 2)
+#define PINMUX_GPIO78__FUNC_DBG_MON_A7 (MTK_PIN_NO(78) | 7)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 2)
+#define PINMUX_GPIO79__FUNC_DBG_MON_A8 (MTK_PIN_NO(79) | 7)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 2)
+#define PINMUX_GPIO80__FUNC_DBG_MON_A9 (MTK_PIN_NO(80) | 7)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_DBG_MON_A10 (MTK_PIN_NO(81) | 7)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_DBG_MON_A11 (MTK_PIN_NO(82) | 7)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_DBG_MON_A12 (MTK_PIN_NO(83) | 7)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_DBG_MON_A13 (MTK_PIN_NO(84) | 7)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(85) | 2)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(86) | 2)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(87) | 2)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(88) | 2)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_SPMI_SCL (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_SCL10 (MTK_PIN_NO(89) | 2)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_SPMI_SDA (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_SDA10 (MTK_PIN_NO(90) | 2)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_AP_GOOD (MTK_PIN_NO(91) | 1)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_URXD0 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_MD_URXD0 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_MD_URXD1 (MTK_PIN_NO(92) | 3)
+#define PINMUX_GPIO92__FUNC_SSPM_URXD_AO (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(92) | 5)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_UTXD0 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_MD_UTXD0 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_MD_UTXD1 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(93) | 4)
+#define PINMUX_GPIO93__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_WIFI_TXD (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_URXD1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_ADSP_URXD0 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_RXD (MTK_PIN_NO(94) | 3)
+#define PINMUX_GPIO94__FUNC_SSPM_URXD_AO (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_TP_URXD1_AO (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_URXD2_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_UTXD1 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_ADSP_UTXD0 (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_MD32_0_TXD (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_TP_UTXD1_AO (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_UTXD2_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_TDM_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2S7_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_I2S9_LRCK (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_SPI4_A_CLK (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_IO_JTAG_TDI (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_TDM_BCK (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2S7_BCK (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_I2S9_BCK (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_SPI4_A_CSB (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(97) | 6)
+#define PINMUX_GPIO97__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_TDM_MCK (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2S7_MCK (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_I2S9_MCK (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_SPI4_A_MI (MTK_PIN_NO(98) | 4)
+#define PINMUX_GPIO98__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(98) | 5)
+#define PINMUX_GPIO98__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(98) | 6)
+#define PINMUX_GPIO98__FUNC_IO_JTAG_TCK (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_TDM_DATA0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_I2S6_DI (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_I2S8_DI (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPI4_A_MO (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(99) | 5)
+#define PINMUX_GPIO99__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(99) | 6)
+#define PINMUX_GPIO99__FUNC_IO_JTAG_TDO (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_TDM_DATA1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_I2S7_DO (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_I2S9_DO (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_DP_TX_HPD (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(100) | 5)
+#define PINMUX_GPIO100__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(100) | 6)
+#define PINMUX_GPIO100__FUNC_IO_JTAG_TMS (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_TDM_DATA2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SRCLKENAI0 (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_SPI5_B_CLK (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_CLKM0 (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_DAP_MD32_SWD (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_TDM_DATA3 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SRCLKENAI1 (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_SPI5_B_CSB (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_DP_TX_HPD (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_SPI0_A_MI (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_SCP_SPI0_MI (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_DFD_TDO (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_SPM_JTAG_TDO (MTK_PIN_NO(103) | 6)
+#define PINMUX_GPIO103__FUNC_JTDO_SEL1 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SPI0_A_CSB (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SCP_SPI0_CS (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_DFD_TMS (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_SPM_JTAG_TMS (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_JTMS_SEL1 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SPI0_A_MO (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SCP_SPI0_MO (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_SCP_SDA0 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_DFD_TDI (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_SPM_JTAG_TDI (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_JTDI_SEL1 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SPI0_A_CLK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SCP_SPI0_CK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_SCP_SCL0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_DFD_TCK_XI (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_SPM_JTAG_TCK (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_JTCK_SEL1 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_PWM_0 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_CLKM2 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_SPI5_B_MI (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_SPM_JTAG_TRSTN (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_DMIC_DAT (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_PWM_1 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_CLKM3 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_SPI5_B_MO (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_I2S1_MCK (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_I2S3_MCK (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_DP_TX_HPD (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK_A (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_SRCLKENAI0 (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_I2S1_BCK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_I2S3_BCK (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_PCM0_CLK (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK_A (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(110) | 6)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_I2S1_LRCK (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_I2S3_LRCK (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_PCM0_SYNC (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK_A (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(111) | 6)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_I2S2_DI (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_I2S0_DI (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_I2S2_DI2 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_PCM0_DI (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_I2S2_DI_A (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(112) | 6)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_I2S1_DO (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_I2S3_DO (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_I2S5_DO (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_PCM0_DO (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_I2S2_DI2 (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI2_MI (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SCP_SPI2_MI (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI2_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SCP_SPI2_CS (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_CONN_BGF_MCU_DBGI_N (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI2_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SCP_SPI2_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_SCP_SDA1 (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_CONN_BGF_MCU_DBGACK_N (MTK_PIN_NO(116) | 6)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI2_CLK (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SCP_SPI2_CK (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_SCP_SCL1 (MTK_PIN_NO(117) | 3)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SCL1 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_SCP_SCL0 (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_SCP_SCL1 (MTK_PIN_NO(118) | 3)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SDA1 (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_SCP_SDA0 (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_SCP_SDA1 (MTK_PIN_NO(119) | 3)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SCL9 (MTK_PIN_NO(120) | 1)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SDA9 (MTK_PIN_NO(121) | 1)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_SCL8 (MTK_PIN_NO(122) | 1)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SDA8 (MTK_PIN_NO(123) | 1)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SCL7 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_DMIC1_CLK (MTK_PIN_NO(124) | 2)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SDA7 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_DMIC1_DAT (MTK_PIN_NO(125) | 2)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_CMFLASH0 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_PWM_2 (MTK_PIN_NO(126) | 2)
+#define PINMUX_GPIO126__FUNC_TP_UCTS1_AO (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UCTS0 (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_SCL11 (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(126) | 6)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_CMFLASH1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_PWM_3 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_TP_URTS1_AO (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_URTS0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_SDA11 (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_MD32_1_GPIO1 (MTK_PIN_NO(127) | 6)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_CMFLASH2 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_PWM_0 (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_TP_UCTS2_AO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UCTS1 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_SCL12 (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_MD32_1_GPIO2 (MTK_PIN_NO(128) | 6)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_CMFLASH3 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_PWM_1 (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_TP_URTS2_AO (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_URTS1 (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SDA12 (MTK_PIN_NO(129) | 5)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_CMVREF0 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_ANT_SEL10 (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_SCP_JTAG0_TDO (MTK_PIN_NO(130) | 3)
+#define PINMUX_GPIO130__FUNC_MD32_0_JTAG_TDO (MTK_PIN_NO(130) | 4)
+#define PINMUX_GPIO130__FUNC_SCL11 (MTK_PIN_NO(130) | 5)
+#define PINMUX_GPIO130__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(130) | 6)
+#define PINMUX_GPIO130__FUNC_DBG_MON_A23 (MTK_PIN_NO(130) | 7)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_CMVREF1 (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_ANT_SEL11 (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_MD32_0_JTAG_TDI (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_SDA11 (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_DBG_MON_A26 (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_CMVREF2 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_ANT_SEL12 (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_MD32_0_JTAG_TMS (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_DBG_MON_A28 (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_CMVREF3 (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TCK (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_MD32_0_JTAG_TCK (MTK_PIN_NO(133) | 4)
+#define PINMUX_GPIO133__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_DBG_MON_A24 (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_CMVREF4 (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_SCP_JTAG0_TRSTN (MTK_PIN_NO(134) | 3)
+#define PINMUX_GPIO134__FUNC_MD32_0_JTAG_TRST (MTK_PIN_NO(134) | 4)
+#define PINMUX_GPIO134__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(134) | 6)
+#define PINMUX_GPIO134__FUNC_DBG_MON_A27 (MTK_PIN_NO(134) | 7)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_PWM_0 (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_SRCLKENAI1 (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MD_URXD0 (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_MD32_0_RXD (MTK_PIN_NO(135) | 4)
+#define PINMUX_GPIO135__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_CONN_WF_MCU_DBGI_N (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_DBG_MON_A29 (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_CMMCLK3 (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_CLKM1 (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MD_UTXD0 (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_MD32_0_TXD (MTK_PIN_NO(136) | 4)
+#define PINMUX_GPIO136__FUNC_CONN_BT_TXD (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_CONN_WF_MCU_DBGACK_N (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_DBG_MON_A25 (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_CMMCLK4 (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_CLKM2 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_MD_URXD1 (MTK_PIN_NO(137) | 3)
+#define PINMUX_GPIO137__FUNC_MD32_1_RXD (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_ILDO_DOUT0 (MTK_PIN_NO(137) | 5)
+#define PINMUX_GPIO137__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(137) | 6)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_CMMCLK5 (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_CLKM3 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_MD_UTXD1 (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_MD32_1_TXD (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_ILDO_DOUT1 (MTK_PIN_NO(138) | 5)
+#define PINMUX_GPIO138__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(138) | 6)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_SCL4 (MTK_PIN_NO(139) | 1)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_SDA4 (MTK_PIN_NO(140) | 1)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_SCL2 (MTK_PIN_NO(141) | 1)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_SDA2 (MTK_PIN_NO(142) | 1)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_CMVREF0 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_SPI3_CLK (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_SCP_JTAG1_TDO (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD32_1_JTAG_TDO (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_CMVREF1 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_SPI3_CSB (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_SCP_JTAG1_TDI (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD32_1_JTAG_TDI (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_CMVREF2 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_SPI3_MI (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(145) | 3)
+#define PINMUX_GPIO145__FUNC_SCP_JTAG1_TMS (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_MD32_1_JTAG_TMS (MTK_PIN_NO(145) | 5)
+#define PINMUX_GPIO145__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(145) | 6)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_CMVREF3 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_SPI3_MO (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(146) | 3)
+#define PINMUX_GPIO146__FUNC_SCP_JTAG1_TCK (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_MD32_1_JTAG_TCK (MTK_PIN_NO(146) | 5)
+#define PINMUX_GPIO146__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(146) | 6)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_CMVREF4 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG1_TRSTN (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_MD32_1_JTAG_TRST (MTK_PIN_NO(147) | 5)
+#define PINMUX_GPIO147__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(147) | 6)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_PWM_1 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AGPS_SYNC (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_CMMCLK5 (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(148) | 6)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_CMMCLK0 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_CLKM0 (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(149) | 3)
+#define PINMUX_GPIO149__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(149) | 6)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_CMMCLK1 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_CLKM1 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_MD32_0_GPIO1 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(150) | 6)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_CMMCLK2 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_CLKM2 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_MD32_0_GPIO2 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_KPROW1 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_PWM_2 (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_IDDIG (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_DP_TX_HPD (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(152) | 6)
+#define PINMUX_GPIO152__FUNC_DBG_MON_B2 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_KPROW0 (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_DBG_MON_B1 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_KPCOL0 (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A32 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_KPCOL1 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_PWM_3 (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_USB_DRVVBUS (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_LCM1_RST (MTK_PIN_NO(155) | 5)
+#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_B0 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_SPI1_A_CLK (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_SCP_SPI1_A_CK (MTK_PIN_NO(156) | 2)
+#define PINMUX_GPIO156__FUNC_MRG_CLK (MTK_PIN_NO(156) | 3)
+#define PINMUX_GPIO156__FUNC_AGPS_SYNC (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_SCL12 (MTK_PIN_NO(156) | 5)
+#define PINMUX_GPIO156__FUNC_DBG_MON_B3 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_SPI1_A_CSB (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_SCP_SPI1_A_CS (MTK_PIN_NO(157) | 2)
+#define PINMUX_GPIO157__FUNC_MRG_SYNC (MTK_PIN_NO(157) | 3)
+#define PINMUX_GPIO157__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_SDA12 (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_DBG_MON_B4 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_SPI1_A_MI (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_SCP_SPI1_A_MI (MTK_PIN_NO(158) | 2)
+#define PINMUX_GPIO158__FUNC_MRG_DI (MTK_PIN_NO(158) | 3)
+#define PINMUX_GPIO158__FUNC_PTA_RXD (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_SCL13 (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_DBG_MON_B5 (MTK_PIN_NO(158) | 7)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_SPI1_A_MO (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_SCP_SPI1_A_MO (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_MRG_DO (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_PTA_TXD (MTK_PIN_NO(159) | 4)
+#define PINMUX_GPIO159__FUNC_SDA13 (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_DBG_MON_B6 (MTK_PIN_NO(159) | 7)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_SCL3 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_SCP_SCL0 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_SCP_SCL1 (MTK_PIN_NO(160) | 3)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SDA3 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_SCP_SDA0 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_SCP_SDA1 (MTK_PIN_NO(161) | 3)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_ANT_SEL0 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_DBG_MON_B7 (MTK_PIN_NO(162) | 7)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_ANT_SEL1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_DBG_MON_B8 (MTK_PIN_NO(163) | 7)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_ANT_SEL2 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_SCP_SPI1_B_CK (MTK_PIN_NO(164) | 2)
+#define PINMUX_GPIO164__FUNC_TP_URXD1_AO (MTK_PIN_NO(164) | 3)
+#define PINMUX_GPIO164__FUNC_UCTS0 (MTK_PIN_NO(164) | 5)
+#define PINMUX_GPIO164__FUNC_DBG_MON_B9 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_ANT_SEL3 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_SCP_SPI1_B_CS (MTK_PIN_NO(165) | 2)
+#define PINMUX_GPIO165__FUNC_TP_UTXD1_AO (MTK_PIN_NO(165) | 3)
+#define PINMUX_GPIO165__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(165) | 4)
+#define PINMUX_GPIO165__FUNC_URTS0 (MTK_PIN_NO(165) | 5)
+#define PINMUX_GPIO165__FUNC_DBG_MON_B10 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_ANT_SEL4 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_SCP_SPI1_B_MI (MTK_PIN_NO(166) | 2)
+#define PINMUX_GPIO166__FUNC_TP_URXD2_AO (MTK_PIN_NO(166) | 3)
+#define PINMUX_GPIO166__FUNC_SRCLKENAI1 (MTK_PIN_NO(166) | 4)
+#define PINMUX_GPIO166__FUNC_UCTS1 (MTK_PIN_NO(166) | 5)
+#define PINMUX_GPIO166__FUNC_DBG_MON_B11 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_ANT_SEL5 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_SCP_SPI1_B_MO (MTK_PIN_NO(167) | 2)
+#define PINMUX_GPIO167__FUNC_TP_UTXD2_AO (MTK_PIN_NO(167) | 3)
+#define PINMUX_GPIO167__FUNC_SRCLKENAI0 (MTK_PIN_NO(167) | 4)
+#define PINMUX_GPIO167__FUNC_URTS1 (MTK_PIN_NO(167) | 5)
+#define PINMUX_GPIO167__FUNC_DBG_MON_B12 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_ANT_SEL6 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI0_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_TP_UCTS1_AO (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_KPCOL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_MD_UCTS0 (MTK_PIN_NO(168) | 5)
+#define PINMUX_GPIO168__FUNC_SCL12 (MTK_PIN_NO(168) | 6)
+#define PINMUX_GPIO168__FUNC_DBG_MON_B13 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI0_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_TP_URTS1_AO (MTK_PIN_NO(169) | 3)
+#define PINMUX_GPIO169__FUNC_KPROW2 (MTK_PIN_NO(169) | 4)
+#define PINMUX_GPIO169__FUNC_MD_URTS0 (MTK_PIN_NO(169) | 5)
+#define PINMUX_GPIO169__FUNC_SDA12 (MTK_PIN_NO(169) | 6)
+#define PINMUX_GPIO169__FUNC_DBG_MON_B14 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_ANT_SEL8 (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI0_B_MI (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_TP_UCTS2_AO (MTK_PIN_NO(170) | 3)
+#define PINMUX_GPIO170__FUNC_SRCLKENAI1 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_MD_UCTS1 (MTK_PIN_NO(170) | 5)
+#define PINMUX_GPIO170__FUNC_SCL13 (MTK_PIN_NO(170) | 6)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_ANT_SEL9 (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI0_B_MO (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_TP_URTS2_AO (MTK_PIN_NO(171) | 3)
+#define PINMUX_GPIO171__FUNC_SRCLKENAI0 (MTK_PIN_NO(171) | 4)
+#define PINMUX_GPIO171__FUNC_MD_URTS1 (MTK_PIN_NO(171) | 5)
+#define PINMUX_GPIO171__FUNC_SDA13 (MTK_PIN_NO(171) | 6)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_AUXIF_CLK0 (MTK_PIN_NO(172) | 2)
+#define PINMUX_GPIO172__FUNC_DBG_MON_B18 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_AUXIF_ST0 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_DBG_MON_B19 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CONN_HRST_B (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_DBG_MON_B17 (MTK_PIN_NO(174) | 7)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CONN_WB_PTA (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_DBG_MON_B20 (MTK_PIN_NO(175) | 7)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_CONN_BT_CLK (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_AUXIF_CLK1 (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_DBG_MON_B15 (MTK_PIN_NO(176) | 7)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_CONN_BT_DATA (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_AUXIF_ST1 (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_DBG_MON_B16 (MTK_PIN_NO(177) | 7)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_DBG_MON_B21 (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_DBG_MON_B22 (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_DBG_MON_B23 (MTK_PIN_NO(180) | 7)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(181) | 2)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(182) | 2)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_MSDC0_CMD (MTK_PIN_NO(183) | 1)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_MSDC0_DAT0 (MTK_PIN_NO(184) | 1)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_MSDC0_DAT2 (MTK_PIN_NO(185) | 1)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MSDC0_DAT4 (MTK_PIN_NO(186) | 1)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MSDC0_DAT6 (MTK_PIN_NO(187) | 1)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_MSDC0_DAT1 (MTK_PIN_NO(188) | 1)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_MSDC0_DAT5 (MTK_PIN_NO(189) | 1)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_MSDC0_DAT7 (MTK_PIN_NO(190) | 1)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_MSDC0_DSL (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_IDDIG (MTK_PIN_NO(191) | 3)
+#define PINMUX_GPIO191__FUNC_DMIC_CLK (MTK_PIN_NO(191) | 4)
+#define PINMUX_GPIO191__FUNC_DSI1_TE (MTK_PIN_NO(191) | 5)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_MSDC0_CLK (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_USB_DRVVBUS (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_DMIC_DAT (MTK_PIN_NO(192) | 4)
+#define PINMUX_GPIO192__FUNC_LCM1_RST (MTK_PIN_NO(192) | 5)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_MSDC0_DAT3 (MTK_PIN_NO(193) | 1)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_MSDC0_RSTB (MTK_PIN_NO(194) | 1)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(195) | 2)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2 (MTK_PIN_NO(196) | 1)
+#define PINMUX_GPIO196__FUNC_DBG_MON_B27 (MTK_PIN_NO(196) | 7)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(197) | 1)
+#define PINMUX_GPIO197__FUNC_AUD_CLK_MISO (MTK_PIN_NO(197) | 2)
+#define PINMUX_GPIO197__FUNC_I2S2_MCK (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_I2S6_MCK (MTK_PIN_NO(197) | 4)
+#define PINMUX_GPIO197__FUNC_I2S8_MCK (MTK_PIN_NO(197) | 5)
+#define PINMUX_GPIO197__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(197) | 6)
+#define PINMUX_GPIO197__FUNC_DBG_MON_B28 (MTK_PIN_NO(197) | 7)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(198) | 2)
+#define PINMUX_GPIO198__FUNC_I2S2_BCK (MTK_PIN_NO(198) | 3)
+#define PINMUX_GPIO198__FUNC_I2S6_BCK (MTK_PIN_NO(198) | 4)
+#define PINMUX_GPIO198__FUNC_I2S8_BCK (MTK_PIN_NO(198) | 5)
+#define PINMUX_GPIO198__FUNC_DBG_MON_B29 (MTK_PIN_NO(198) | 7)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_AUD_DAT_MISO2 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_I2S2_DI2 (MTK_PIN_NO(199) | 3)
+#define PINMUX_GPIO199__FUNC_DBG_MON_B32 (MTK_PIN_NO(199) | 7)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL6 (MTK_PIN_NO(200) | 1)
+#define PINMUX_GPIO200__FUNC_SCP_SCL0 (MTK_PIN_NO(200) | 2)
+#define PINMUX_GPIO200__FUNC_SCP_SCL1 (MTK_PIN_NO(200) | 3)
+#define PINMUX_GPIO200__FUNC_SCL_6306 (MTK_PIN_NO(200) | 4)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA6 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_SCP_SDA0 (MTK_PIN_NO(201) | 2)
+#define PINMUX_GPIO201__FUNC_SCP_SDA1 (MTK_PIN_NO(201) | 3)
+#define PINMUX_GPIO201__FUNC_SDA_6306 (MTK_PIN_NO(201) | 4)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL5 (MTK_PIN_NO(202) | 1)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA5 (MTK_PIN_NO(203) | 1)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL0 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_SPI4_C_CLK (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_SPI7_B_CLK (MTK_PIN_NO(204) | 3)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA0 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_SPI4_C_CSB (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_SPI7_B_CSB (MTK_PIN_NO(205) | 3)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_SRCLKENA0 (MTK_PIN_NO(206) | 1)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_SRCLKENA1 (MTK_PIN_NO(207) | 1)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_WATCHDOG (MTK_PIN_NO(208) | 1)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(209) | 2)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(212) | 1)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_RTC32K_CK (MTK_PIN_NO(213) | 1)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_I2S1_MCK (MTK_PIN_NO(214) | 3)
+#define PINMUX_GPIO214__FUNC_I2S7_MCK (MTK_PIN_NO(214) | 4)
+#define PINMUX_GPIO214__FUNC_I2S9_MCK (MTK_PIN_NO(214) | 5)
+#define PINMUX_GPIO214__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(214) | 6)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_I2S1_BCK (MTK_PIN_NO(215) | 3)
+#define PINMUX_GPIO215__FUNC_I2S7_BCK (MTK_PIN_NO(215) | 4)
+#define PINMUX_GPIO215__FUNC_I2S9_BCK (MTK_PIN_NO(215) | 5)
+#define PINMUX_GPIO215__FUNC_DBG_MON_B24 (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(216) | 1)
+#define PINMUX_GPIO216__FUNC_I2S1_LRCK (MTK_PIN_NO(216) | 3)
+#define PINMUX_GPIO216__FUNC_I2S7_LRCK (MTK_PIN_NO(216) | 4)
+#define PINMUX_GPIO216__FUNC_I2S9_LRCK (MTK_PIN_NO(216) | 5)
+#define PINMUX_GPIO216__FUNC_DBG_MON_B25 (MTK_PIN_NO(216) | 7)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_I2S1_DO (MTK_PIN_NO(217) | 3)
+#define PINMUX_GPIO217__FUNC_I2S7_DO (MTK_PIN_NO(217) | 4)
+#define PINMUX_GPIO217__FUNC_I2S9_DO (MTK_PIN_NO(217) | 5)
+#define PINMUX_GPIO217__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(217) | 6)
+#define PINMUX_GPIO217__FUNC_DBG_MON_B26 (MTK_PIN_NO(217) | 7)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_VOW_DAT_MISO (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_I2S2_LRCK (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_I2S6_LRCK (MTK_PIN_NO(218) | 4)
+#define PINMUX_GPIO218__FUNC_I2S8_LRCK (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_DBG_MON_B30 (MTK_PIN_NO(218) | 7)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_VOW_CLK_MISO (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_I2S2_DI (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_I2S6_DI (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_I2S8_DI (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_DBG_MON_B31 (MTK_PIN_NO(219) | 7)
+
+#endif /* __MT6893-PINFUNC_H */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d12eac9b3eeb..9f100b18a676 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -320,7 +320,7 @@
 	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
 	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
 	 */
-	asm_sel {
+	asm-sel-hog {
 		gpio-hog;
 		gpios = <90 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
new file mode 100644
index 000000000000..53de9c113f60
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4-2g5", "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
+	chassis-type = "embedded";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 6623112c24c7..36bd1ef2efab 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -2,408 +2,18 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
-
-#include "mt7988a.dtsi"
+#include "mt7988a-bananapi-bpi-r4.dtsi"
 
 / {
 	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
-	model = "Banana Pi BPI-R4";
+	model = "Banana Pi BPI-R4 (2x SFP+)";
 	chassis-type = "embedded";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
 };
 
-&cpu0 {
-	proc-supply = <&rt5190_buck3>;
-};
-
-&cpu1 {
-	proc-supply = <&rt5190_buck3>;
-};
-
-&cpu2 {
-	proc-supply = <&rt5190_buck3>;
-};
-
-&cpu3 {
-	proc-supply = <&rt5190_buck3>;
-};
-
-&cpu_thermal {
-	trips {
-		cpu_trip_hot: hot {
-			temperature = <120000>;
-			hysteresis = <2000>;
-			type = "hot";
-		};
-
-		cpu_trip_active_high: active-high {
-			temperature = <115000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_trip_active_med: active-med {
-			temperature = <85000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_trip_active_low: active-low {
-			temperature = <40000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	rt5190a_64: rt5190a@64 {
-		compatible = "richtek,rt5190a";
-		reg = <0x64>;
-		vin2-supply = <&rt5190_buck1>;
-		vin3-supply = <&rt5190_buck1>;
-		vin4-supply = <&rt5190_buck1>;
-
-		regulators {
-			rt5190_buck1: buck1 {
-				regulator-name = "rt5190a-buck1";
-				regulator-min-microvolt = <5090000>;
-				regulator-max-microvolt = <5090000>;
-				regulator-allowed-modes =
-				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			buck2 {
-				regulator-name = "vcore";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			rt5190_buck3: buck3 {
-				regulator-name = "vproc";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
-			};
-			buck4 {
-				regulator-name = "rt5190a-buck4";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-allowed-modes =
-				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-			ldo {
-				regulator-name = "rt5190a-ldo";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_1_pins>;
-	status = "okay";
-
-	pca9545: i2c-mux@70 {
-		compatible = "nxp,pca9545";
-		reg = <0x70>;
-		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+&pca9545 {
+	i2c_sfp2: i2c@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			pcf8563: rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-				#clock-cells = <0>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c02";
-				reg = <0x57>;
-				size = <256>;
-			};
-
-		};
-
-		i2c_sfp1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_sfp2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-	};
-};
-
-/* mPCIe SIM2 */
-&pcie0 {
-	status = "okay";
-};
-
-/* mPCIe SIM3 */
-&pcie1 {
-	status = "okay";
-};
-
-/* M.2 key-B SIM1 */
-&pcie2 {
-	status = "okay";
-};
-
-/* M.2 key-M SSD */
-&pcie3 {
-	status = "okay";
-};
-
-&pio {
-	mdio0_pins: mdio0-pins {
-		mux {
-			function = "eth";
-			groups = "mdc_mdio0";
-		};
-
-		conf {
-			pins = "SMI_0_MDC", "SMI_0_MDIO";
-			drive-strength = <8>;
-		};
-	};
-
-	i2c0_pins: i2c0-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c0_1";
-		};
-	};
-
-	i2c1_pins: i2c1-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c1_0";
-		};
-	};
-
-	i2c1_sfp_pins: i2c1-sfp-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c1_sfp";
-		};
-	};
-
-	i2c2_0_pins: i2c2-g0-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c2_0";
-		};
+		reg = <2>;
 	};
-
-	i2c2_1_pins: i2c2-g1-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c2_1";
-		};
-	};
-
-	gbe0_led0_pins: gbe0-led0-pins {
-		mux {
-			function = "led";
-			groups = "gbe0_led0";
-		};
-	};
-
-	gbe1_led0_pins: gbe1-led0-pins {
-		mux {
-			function = "led";
-			groups = "gbe1_led0";
-		};
-	};
-
-	gbe2_led0_pins: gbe2-led0-pins {
-		mux {
-			function = "led";
-			groups = "gbe2_led0";
-		};
-	};
-
-	gbe3_led0_pins: gbe3-led0-pins {
-		mux {
-			function = "led";
-			groups = "gbe3_led0";
-		};
-	};
-
-	gbe0_led1_pins: gbe0-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe0_led1";
-		};
-	};
-
-	gbe1_led1_pins: gbe1-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe1_led1";
-		};
-	};
-
-	gbe2_led1_pins: gbe2-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe2_led1";
-		};
-	};
-
-	gbe3_led1_pins: gbe3-led1-pins {
-		mux {
-			function = "led";
-			groups = "gbe3_led1";
-		};
-	};
-
-	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
-		mux {
-			function = "led";
-			groups = "2p5gbe_led0";
-		};
-	};
-
-	i2p5gbe_led1_pins: 2p5gbe-led1-pins {
-		mux {
-			function = "led";
-			groups = "2p5gbe_led1";
-		};
-	};
-
-	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
-		mux {
-			function = "flash";
-			groups = "emmc_45";
-		};
-	};
-
-	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
-		mux {
-			function = "flash";
-			groups = "emmc_51";
-		};
-	};
-
-	mmc0_pins_sdcard: mmc0-sdcard-pins {
-		mux {
-			function = "flash";
-			groups = "sdcard";
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		mux {
-			function = "uart";
-			groups =  "uart0";
-		};
-	};
-
-	snfi_pins: snfi-pins {
-		mux {
-			function = "flash";
-			groups = "snfi";
-		};
-	};
-
-	spi0_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0";
-		};
-	};
-
-	spi0_flash_pins: spi0-flash-pins {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-	};
-
-	spi1_pins: spi1-pins {
-		mux {
-			function = "spi";
-			groups = "spi1";
-		};
-	};
-
-	spi2_pins: spi2-pins {
-		mux {
-			function = "spi";
-			groups = "spi2";
-		};
-	};
-
-	spi2_flash_pins: spi2-flash-pins {
-		mux {
-			function = "spi";
-			groups = "spi2", "spi2_wp_hold";
-		};
-	};
-};
-
-&pwm {
-	status = "okay";
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&ssusb1 {
-	status = "okay";
-};
-
-&tphy {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
new file mode 100644
index 000000000000..81ba045e0e0e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
+#include "mt7988a.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
+		cooling-levels = <0 80 128 255>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 0 50000>;
+		status = "okay";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu1 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu2 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu3 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_hot: hot {
+			temperature = <120000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+
+		cpu_trip_active_high: active-high {
+			temperature = <115000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: active-med {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: active-low {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	rt5190a_64: rt5190a@64 {
+		compatible = "richtek,rt5190a";
+		reg = <0x64>;
+		vin2-supply = <&rt5190_buck1>;
+		vin3-supply = <&rt5190_buck1>;
+		vin4-supply = <&rt5190_buck1>;
+
+		regulators {
+			rt5190_buck1: buck1 {
+				regulator-name = "rt5190a-buck1";
+				regulator-min-microvolt = <5090000>;
+				regulator-max-microvolt = <5090000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			buck2 {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			rt5190_buck3: buck3 {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+			buck4 {
+				regulator-name = "rt5190a-buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			ldo {
+				regulator-name = "rt5190a-ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_pins>;
+	status = "okay";
+
+	pca9545: i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+				#clock-cells = <0>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				size = <256>;
+			};
+
+		};
+
+		i2c_sfp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+/* mPCIe SIM2 */
+&pcie0 {
+	status = "okay";
+};
+
+/* mPCIe SIM3 */
+&pcie1 {
+	status = "okay";
+};
+
+/* M.2 key-B SIM1 */
+&pcie2 {
+	status = "okay";
+};
+
+/* M.2 key-M SSD */
+&pcie3 {
+	status = "okay";
+};
+
+&pio {
+	mdio0_pins: mdio0-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio0";
+		};
+
+		conf {
+			pins = "SMI_0_MDC", "SMI_0_MDIO";
+			drive-strength = <8>;
+		};
+	};
+
+	i2c0_pins: i2c0-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
+	i2c1_pins: i2c1-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c1_sfp_pins: i2c1-sfp-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_sfp";
+		};
+	};
+
+	i2c2_0_pins: i2c2-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_0";
+		};
+	};
+
+	i2c2_1_pins: i2c2-g1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_1";
+		};
+	};
+
+	gbe0_led0_pins: gbe0-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led0";
+		};
+	};
+
+	gbe1_led0_pins: gbe1-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe1_led0";
+		};
+	};
+
+	gbe2_led0_pins: gbe2-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe2_led0";
+		};
+	};
+
+	gbe3_led0_pins: gbe3-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe3_led0";
+		};
+	};
+
+	gbe0_led1_pins: gbe0-led1-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led1";
+		};
+	};
+
+	gbe1_led1_pins: gbe1-led1-pins {
+		mux {
+			function = "led";
+			groups = "gbe1_led1";
+		};
+	};
+
+	gbe2_led1_pins: gbe2-led1-pins {
+		mux {
+			function = "led";
+			groups = "gbe2_led1";
+		};
+	};
+
+	gbe3_led1_pins: gbe3-led1-pins {
+		mux {
+			function = "led";
+			groups = "gbe3_led1";
+		};
+	};
+
+	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
+		mux {
+			function = "led";
+			groups = "2p5gbe_led0";
+		};
+	};
+
+	i2p5gbe_led1_pins: 2p5gbe-led1-pins {
+		mux {
+			function = "led";
+			groups = "2p5gbe_led1";
+		};
+	};
+
+	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+
+	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_51";
+		};
+	};
+
+	mmc0_pins_sdcard: mmc0-sdcard-pins {
+		mux {
+			function = "flash";
+			groups = "sdcard";
+		};
+	};
+
+	snfi_pins: snfi-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0";
+		};
+	};
+
+	spi0_flash_pins: spi0-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		mux {
+			function = "spi";
+			groups = "spi2";
+		};
+	};
+
+	spi2_flash_pins: spi2-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi2", "spi2_wp_hold";
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bl2";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+	};
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&tphy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&xsphy {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 88b56a24efca..c46b31f8d653 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -209,6 +209,20 @@
 						 "pcie_wake_n3_0";
 				};
 			};
+
+			spi1_pins: spi1-pins {
+				mux {
+					function = "spi";
+					groups = "spi1";
+				};
+			};
+
+			uart0_pins: uart0-pins {
+				mux {
+					function = "uart";
+					groups =  "uart0";
+				};
+			};
 		};
 
 		pwm: pwm@10048000 {
@@ -244,6 +258,8 @@
 			clocks = <&topckgen CLK_TOP_UART_SEL>,
 				 <&infracfg CLK_INFRA_52M_UART0_CK>;
 			clock-names = "baud", "bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 			status = "disabled";
 		};
 
@@ -311,6 +327,53 @@
 			status = "disabled";
 		};
 
+		spi0: spi@11007000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11007000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI0>,
+				 <&infracfg CLK_INFRA_66M_SPI0_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11008000 {
+			compatible = "mediatek,mt7988-spi-single", "mediatek,spi-ipm";
+			reg = <0 0x11008000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI1>,
+				 <&infracfg CLK_INFRA_66M_SPI1_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			status = "disabled";
+		};
+
+		spi2: spi@11009000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI2_BCK>,
+				 <&infracfg CLK_INFRA_66M_SPI2_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		lvts: lvts@1100a000 {
 			compatible = "mediatek,mt7988-lvts-ap";
 			#thermal-sensor-cells = <1>;
@@ -334,6 +397,8 @@
 				 <&infracfg CLK_INFRA_133M_USB_HCK>,
 				 <&infracfg CLK_INFRA_USB_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&xphyu2port0 PHY_TYPE_USB2>,
+			       <&xphyu3port0 PHY_TYPE_USB3>;
 			status = "disabled";
 		};
 
@@ -398,6 +463,9 @@
 			pinctrl-0 = <&pcie2_pins>;
 			status = "disabled";
 
+			phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &pcie_intc2 0>,
@@ -548,6 +616,37 @@
 			};
 		};
 
+
+		topmisc: system-controller@11d10084 {
+			compatible = "mediatek,mt7988-topmisc",
+				     "syscon";
+			reg = <0 0x11d10084 0 0xff80>;
+		};
+
+		xsphy: xs-phy@11e10000 {
+			compatible = "mediatek,mt7988-xsphy",
+				     "mediatek,xsphy";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			xphyu2port0: usb-phy@11e10000 {
+				reg = <0 0x11e10000 0 0x400>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			xphyu3port0: usb-phy@11e13000 {
+				reg = <0 0x11e13400 0 0x500>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,syscon-type = <&topmisc 0x194 0>;
+			};
+		};
+
 		clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
@@ -564,6 +663,22 @@
 			lvts_calibration: calib@918 {
 				reg = <0x918 0x28>;
 			};
+
+			phy_calibration_p0: calib@940 {
+				reg = <0x940 0x10>;
+			};
+
+			phy_calibration_p1: calib@954 {
+				reg = <0x954 0x10>;
+			};
+
+			phy_calibration_p2: calib@968 {
+				reg = <0x968 0x10>;
+			};
+
+			phy_calibration_p3: calib@97c {
+				reg = <0x97c 0x10>;
+			};
 		};
 
 		clock-controller@15000000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 4fdc23652e70..7eca5916c940 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -105,6 +105,7 @@
 
 	btsco: bt-sco {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -259,14 +260,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&panel_in>;
 };
 
 &gic {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 0aa34e5bbaaa..3c1fe80e64b9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1836,6 +1836,10 @@
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
 		};
 
 		dpi0: dpi@14015000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
new file mode 100644
index 000000000000..986498af4c70
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku0 board";
+	compatible = "google,ponyta-sku0", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@15 {
+		status = "disabled";
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
new file mode 100644
index 000000000000..ff5eea0ddeb4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku1 board";
+	compatible = "google,ponyta-sku1", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@2c {
+		status = "disabled";
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
new file mode 100644
index 000000000000..0abf69077089
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T8 */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T9 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T10 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x00, 0x04, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&sound {
+	model = "mt8186_rt1019_rt5682s";
+};
+
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
index 5ea8bdc00e81..a8e79c2791ba 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
@@ -375,51 +375,6 @@
 			  "TP",
 			  "TP";
 
-	dpi_default_pins: dpi-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
-				 <PINMUX_GPIO104__FUNC_GPIO104>,
-				 <PINMUX_GPIO105__FUNC_GPIO105>,
-				 <PINMUX_GPIO106__FUNC_GPIO106>,
-				 <PINMUX_GPIO107__FUNC_GPIO107>,
-				 <PINMUX_GPIO108__FUNC_GPIO108>,
-				 <PINMUX_GPIO109__FUNC_GPIO109>,
-				 <PINMUX_GPIO110__FUNC_GPIO110>,
-				 <PINMUX_GPIO111__FUNC_GPIO111>,
-				 <PINMUX_GPIO112__FUNC_GPIO112>,
-				 <PINMUX_GPIO113__FUNC_GPIO113>,
-				 <PINMUX_GPIO114__FUNC_GPIO114>,
-				 <PINMUX_GPIO101__FUNC_GPIO101>,
-				 <PINMUX_GPIO100__FUNC_GPIO100>,
-				 <PINMUX_GPIO102__FUNC_GPIO102>,
-				 <PINMUX_GPIO99__FUNC_GPIO99>;
-			drive-strength = <10>;
-			output-low;
-		};
-	};
-
-	dpi_func_pins: dpi-func-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
-				 <PINMUX_GPIO104__FUNC_DPI_DATA1>,
-				 <PINMUX_GPIO105__FUNC_DPI_DATA2>,
-				 <PINMUX_GPIO106__FUNC_DPI_DATA3>,
-				 <PINMUX_GPIO107__FUNC_DPI_DATA4>,
-				 <PINMUX_GPIO108__FUNC_DPI_DATA5>,
-				 <PINMUX_GPIO109__FUNC_DPI_DATA6>,
-				 <PINMUX_GPIO110__FUNC_DPI_DATA7>,
-				 <PINMUX_GPIO111__FUNC_DPI_DATA8>,
-				 <PINMUX_GPIO112__FUNC_DPI_DATA9>,
-				 <PINMUX_GPIO113__FUNC_DPI_DATA10>,
-				 <PINMUX_GPIO114__FUNC_DPI_DATA11>,
-				 <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
-				 <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
-				 <PINMUX_GPIO102__FUNC_DPI_DE>,
-				 <PINMUX_GPIO99__FUNC_DPI_PCLK>;
-			drive-strength = <10>;
-		};
-	};
-
 	en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins {
 		pins-en {
 			pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index 54ed6b9fe675..b88774aadd84 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -518,7 +518,6 @@
 	cap-sdio-irq;
 	no-mmc;
 	no-sd;
-	non-removable;
 	vmmc-supply = <&pp3300_s3>;
 	vqmmc-supply = <&mt6366_vio18_reg>;
 	mmc-pwrseq = <&wifi_pwrseq>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
index f89835ac36f3..f4c207d65b87 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -331,7 +331,11 @@
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
-&scp {
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
 	memory-region = <&scp_mem_reserved>;
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 69a8423d3858..202478407727 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1382,12 +1382,30 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
 		};
 
-		scp: scp@10500000 {
-			compatible = "mediatek,mt8188-scp";
-			reg = <0 0x10500000 0 0x100000>,
-			      <0 0x10720000 0 0xe0000>;
-			reg-names = "sram", "cfg";
-			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		scp_cluster: scp@10720000 {
+			compatible = "mediatek,mt8188-scp-dual";
+			reg = <0 0x10720000 0 0xe0000>;
+			reg-names = "cfg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10500000 0x100000>;
+			status = "disabled";
+
+			scp_c0: scp@0 {
+				compatible = "mediatek,scp-core";
+				reg = <0x0 0xd0000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+
+			scp_c1: scp@d0000 {
+				compatible = "mediatek,scp-core";
+				reg = <0xd0000 0x2f000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
 		};
 
 		afe: audio-controller@10b10000 {
@@ -2224,6 +2242,118 @@
 			#clock-cells = <1>;
 		};
 
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce0 13 CMDQ_THR_PRIO_1>,
+				 <&gce0 14 CMDQ_THR_PRIO_1>,
+				 <&gce0 16 CMDQ_THR_PRIO_1>,
+				 <&gce0 21 CMDQ_THR_PRIO_1>,
+				 <&gce0 22 CMDQ_THR_PRIO_1>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8188-mdp3-ovl", "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8188-mdp3-padding", "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8188-mdp3-tcc", "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		display@1400c000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
 		vpp_smi_common: smi@14012000 {
 			compatible = "mediatek,mt8188-smi-common-vpp";
 			reg = <0 0x14012000 0 0x1000>;
@@ -2255,6 +2385,184 @@
 			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb7 &larb23>;
 		};
 
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+		};
+
+		display@14f24000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+		};
+
+		display@14f25000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+		};
+
 		wpesys: clock-controller@14e00000 {
 			compatible = "mediatek,mt8188-wpesys";
 			reg = <0 0x14e00000 0 0x1000>;
@@ -2284,6 +2592,15 @@
 			#clock-cells = <1>;
 		};
 
+		mutex@14f01000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+		};
+
 		larb5: smi@14f02000 {
 			compatible = "mediatek,mt8188-smi-larb";
 			reg = <0 0x14f02000 0 0x1000>;
@@ -2316,36 +2633,42 @@
 			compatible = "mediatek,mt8188-imgsys1-dip-top";
 			reg = <0 0x15110000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys1_dip_nr: clock-controller@15130000 {
 			compatible = "mediatek,mt8188-imgsys1-dip-nr";
 			reg = <0 0x15130000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe1: clock-controller@15220000 {
 			compatible = "mediatek,mt8188-imgsys-wpe1";
 			reg = <0 0x15220000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		ipesys: clock-controller@15330000 {
 			compatible = "mediatek,mt8188-ipesys";
 			reg = <0 0x15330000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe2: clock-controller@15520000 {
 			compatible = "mediatek,mt8188-imgsys-wpe2";
 			reg = <0 0x15520000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe3: clock-controller@15620000 {
 			compatible = "mediatek,mt8188-imgsys-wpe3";
 			reg = <0 0x15620000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys: clock-controller@16000000 {
@@ -2358,24 +2681,28 @@
 			compatible = "mediatek,mt8188-camsys-rawa";
 			reg = <0 0x1604f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_yuva: clock-controller@1606f000 {
 			compatible = "mediatek,mt8188-camsys-yuva";
 			reg = <0 0x1606f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_rawb: clock-controller@1608f000 {
 			compatible = "mediatek,mt8188-camsys-rawb";
 			reg = <0 0x1608f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_yuvb: clock-controller@160af000 {
 			compatible = "mediatek,mt8188-camsys-yuvb";
 			reg = <0 0x160af000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		ccusys: clock-controller@17200000 {
@@ -2391,7 +2718,7 @@
 			iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			mediatek,scp = <&scp>;
+			mediatek,scp = <&scp_c0>;
 
 			video-codec@10000 {
 				compatible = "mediatek,mtk-vcodec-lat";
@@ -2515,7 +2842,7 @@
 				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_W_LUMA>,
 				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_R_LUMA>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
-			mediatek,scp = <&scp>;
+			mediatek,scp = <&scp_c0>;
 		};
 
 		jpeg_encoder: jpeg-encoder@1a030000 {
@@ -2579,7 +2906,7 @@
 			reg = <0 0x1c002000 0 0x1000>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
 			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
-			iommus = <&vdo_iommu M4U_PORT_L1_DISP_RDMA0>;
+			iommus = <&vpp_iommu M4U_PORT_L1_DISP_RDMA0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 4f2dc0a75566..dd065b1bf94a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -617,22 +617,6 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
-						reg = <MT8195_POWER_DOMAIN_VDEC1>;
-						clocks = <&vdecsys CLK_VDEC_LARB1>;
-						clock-names = "vdec1-0";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
-					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
-						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
-						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
-						clock-names = "venc1-larb";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
 					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
 						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
 						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
@@ -678,15 +662,25 @@
 							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
 							clock-names = "vdec0-0";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
-						};
 
-						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
-							reg = <MT8195_POWER_DOMAIN_VDEC2>;
-							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
-							clock-names = "vdec2-0";
-							mediatek,infracfg = <&infracfg_ao>;
-							#power-domain-cells = <0>;
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
@@ -694,7 +688,17 @@
 							clocks = <&vencsys CLK_VENC_LARB>;
 							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
@@ -3378,6 +3382,7 @@
 			compatible = "mediatek,mt8195-dp-intf";
 			reg = <0 0x1c015000 0 0x1000>;
 			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
 				 <&vdosys0  CLK_VDO0_DP_INTF0>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
new file mode 100644
index 000000000000..99535a6d5cba
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
@@ -0,0 +1,1574 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Guodong Liu <guodong.liu@mediatek.com>
+ *         Lei Xue <lei.xue@mediatek.com>
+ *         Cathy Xu <ot_cathy.xu@mediatek.com>
+ */
+
+#ifndef __MT8196_PINFUNC_H
+#define __MT8196_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_DMIC1_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_SPI3_A_MO (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_FMI2S_B_LRCK (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(0) | 5)
+#define PINMUX_GPIO0__FUNC_TP_GPIO14_AO (MTK_PIN_NO(0) | 6)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_DMIC1_DAT (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_SRCLKENAI1 (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SPI3_A_MI (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_FMI2S_B_DI (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_TP_GPIO15_AO (MTK_PIN_NO(1) | 6)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_PWM_VLP (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_DSI_HSYNC (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_RG_TSFDC_LDO_EN (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_TP_GPIO8_AO (MTK_PIN_NO(2) | 6)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_MD_INT0 (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_DSI1_HSYNC (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_DA_TSFDC_LDO_MODE (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_TP_GPIO9_AO (MTK_PIN_NO(3) | 6)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(4) | 2)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_LCM1_RST (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CLK (MTK_PIN_NO(5) | 2)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_DSI1_TE (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_SPI7_A_CSB (MTK_PIN_NO(6) | 2)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_GPS_PPS0 (MTK_PIN_NO(7) | 3)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SPI7_A_MI (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_EDP_TX_HPD (MTK_PIN_NO(8) | 3)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_I2SIN1_LRCK (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_RG_TSFDC_LDO_REFSEL0 (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_I2SOUT1_DO (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_RG_TSFDC_LDO_REFSEL1 (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_FMI2S_B_BCK (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_DBG_MON_A30 (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_I2SIN1_DI_B (MTK_PIN_NO(12) | 3)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_EDP_TX_HPD (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_GPS_PPS1 (MTK_PIN_NO(13) | 2)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_SRCLKENA2 (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_DSI2_TE (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_MD_INT3 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO8_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_SRCLKENAI0 (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_UCTS0 (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_MD_INT4 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_I2SOUT2_DO (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO9_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_DP_TX_HPD (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_URTS0 (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_KPROW2 (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO10_AO (MTK_PIN_NO(16) | 6)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_DP_OC_EN (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_UCTS1 (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_KPCOL2 (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO11_AO (MTK_PIN_NO(17) | 6)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DMIC1_CLK (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_URTS1 (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_I2SIN2_DI (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_DMIC1_DAT (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_CLKM3_A (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_I2SIN2_BCK (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_IDDIG (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_LCM2_RST (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_GPS_PPS1 (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_CLKM2_A (MTK_PIN_NO(20) | 4)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_BPI_BUS11 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_DSI1_TE (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_DMIC_CLK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(21) | 5)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_BPI_BUS12 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_DSI2_TE (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_DMIC_DAT (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(22) | 5)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_BPI_BUS13 (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_DSI3_TE (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_DMIC1_CLK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(23) | 5)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_BPI_BUS14 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_LCM1_RST (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_AGPS_SYNC (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_DMIC1_DAT (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_DISP_PWM1 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_BPI_BUS15 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_LCM2_RST (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI1 (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_DMIC2_CLK (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_DISP_PWM2 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_BPI_BUS16 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_LCM3_RST (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_DMIC2_DAT (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_DISP_PWM3 (MTK_PIN_NO(26) | 6)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_BPI_BUS17 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_UTXD4 (MTK_PIN_NO(27) | 2)
+#define PINMUX_GPIO27__FUNC_DISP_PWM4 (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_A20 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_BPI_BUS18 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_URXD4 (MTK_PIN_NO(28) | 2)
+#define PINMUX_GPIO28__FUNC_SPI2_A_MI (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_CLKM0_A (MTK_PIN_NO(28) | 4)
+#define PINMUX_GPIO28__FUNC_DBG_MON_A21 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_BPI_BUS19 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_SPI2_A_MO (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_CLKM1_A (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_UCTS4 (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_DBG_MON_A17 (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_BPI_BUS20 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_SPI2_A_CLK (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_CLKM2_A (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_DSI3_HSYNC (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_URTS4 (MTK_PIN_NO(30) | 6)
+#define PINMUX_GPIO30__FUNC_DBG_MON_A18 (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_BPI_BUS21 (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_SPI2_A_CSB (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_CLKM3_A (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_EDP_TX_HPD (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_DBG_MON_A19 (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_LCM4_RST (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_DP_TX_HPD (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_SPU0_TCK (MTK_PIN_NO(32) | 6)
+#define PINMUX_GPIO32__FUNC_IO_JTAG_TCK (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_DSI4_TE (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_DP_OC_EN (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_SPU0_NTRST (MTK_PIN_NO(33) | 6)
+#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 7)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_UCTS5 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_SPU0_TDI (MTK_PIN_NO(34) | 6)
+#define PINMUX_GPIO34__FUNC_IO_JTAG_TDI (MTK_PIN_NO(34) | 7)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_URTS5 (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(35) | 4)
+#define PINMUX_GPIO35__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_SPU0_TDO (MTK_PIN_NO(35) | 6)
+#define PINMUX_GPIO35__FUNC_IO_JTAG_TDO (MTK_PIN_NO(35) | 7)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_UTXD5 (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_SPU0_TMS (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_IO_JTAG_TMS (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_URXD5 (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_MD_INT3 (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_CLKM0_B (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_TP_GPIO5_AO (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_SPU0_UTX (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_MD_INT4 (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_CLKM1_B (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_TP_GPIO6_AO (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_SPU0_URX (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DAP_MD32_SWD (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_I2S_MCK0 (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_GPS_PPS0 (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_DBG_MON_B12 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_I2SIN6_0_BCK (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_SPI4_B_CLK (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_UCTS2 (MTK_PIN_NO(40) | 4)
+#define PINMUX_GPIO40__FUNC_CCU1_UTXD (MTK_PIN_NO(40) | 5)
+#define PINMUX_GPIO40__FUNC_DBG_MON_B13 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_I2SIN6_0_LRCK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_SPI4_B_CSB (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_URTS2 (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_CCU1_URXD (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_DBG_MON_B14 (MTK_PIN_NO(41) | 7)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_I2SIN6_0_DI (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_SPI4_B_MI (MTK_PIN_NO(42) | 3)
+#define PINMUX_GPIO42__FUNC_URXD2 (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_CCU1_URTS (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_MD32_0_RXD (MTK_PIN_NO(42) | 6)
+#define PINMUX_GPIO42__FUNC_DBG_MON_B15 (MTK_PIN_NO(42) | 7)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_I2SOUT6_0_DO (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_SPI4_B_MO (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_UTXD2 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_CCU1_UCTS (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_MD32_0_TXD (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_B16 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_SPI3_A_CLK (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_TP_GPIO10_AO (MTK_PIN_NO(44) | 6)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_DSI2_HSYNC (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_SPI3_A_CSB (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_PWM_VLP (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_TP_GPIO11_AO (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_SCP_SCL4 (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_PWM_VLP (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_SCP_ILDO_DTEST1_VLP (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_TP_GPIO0_AO (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_SCP_SDA4 (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_SCP_ILDO_DTEST2_VLP (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_TP_GPIO1_AO (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_SCP_SCL5 (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_PWM_VLP (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_CCU0_UTXD (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_SCP_ILDO_DTEST3_VLP (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_TP_GPIO2_AO (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_SCP_SDA5 (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_CCU0_URXD (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_SCP_ILDO_DTEST4_VLP (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_TP_GPIO3_AO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_SCP_SCL6 (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_PWM_VLP (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_CCU0_URTS (MTK_PIN_NO(50) | 3)
+#define PINMUX_GPIO50__FUNC_DSI_HSYNC (MTK_PIN_NO(50) | 4)
+#define PINMUX_GPIO50__FUNC_TP_GPIO4_AO (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_SCP_SDA6 (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_CCU0_UCTS (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_DSI1_HSYNC (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_TP_GPIO5_AO (MTK_PIN_NO(51) | 6)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_SCP_SCL1 (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_TDM_DATA2 (MTK_PIN_NO(52) | 3)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_SCP_SDA1 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_TDM_DATA3 (MTK_PIN_NO(53) | 3)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_TDM_MCK (MTK_PIN_NO(54) | 3)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_AUD_CLK_MISO (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_I2SOUT2_BCK (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_TDM_BCK (MTK_PIN_NO(55) | 3)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_I2SOUT2_LRCK (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_TDM_LRCK (MTK_PIN_NO(56) | 3)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_I2SOUT2_DO (MTK_PIN_NO(57) | 2)
+#define PINMUX_GPIO57__FUNC_TDM_DATA0 (MTK_PIN_NO(57) | 3)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_TDM_DATA1 (MTK_PIN_NO(58) | 3)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_I2SIN1_BCK (MTK_PIN_NO(59) | 3)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_KPCOL0 (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_TP_GPIO13_AO (MTK_PIN_NO(60) | 6)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MCU_M_PMIC_POC_I (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_MCU_B_PMIC_POC_I (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_MFG_PMIC_POC_I (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_PRE_UVLO (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_DPM2PMIC (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_SRCLKENA1 (MTK_PIN_NO(65) | 2)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_WATCHDOG (MTK_PIN_NO(66) | 1)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_SRCLKENA0 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_RTC32K_CK (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_CMFLASH0 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_DCXO_FPM_LPM (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_SPMI_M_SCL (MTK_PIN_NO(75) | 1)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_SPMI_M_SDA (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_SPMI_P_SCL (MTK_PIN_NO(77) | 1)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_SPMI_P_SDA (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_CMMCLK0 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MD_INT4 (MTK_PIN_NO(79) | 2)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_CMMCLK1 (MTK_PIN_NO(80) | 1)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_SCP_SPI0_CK (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_SPI6_B_CLK (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_PWM_VLP (MTK_PIN_NO(81) | 3)
+#define PINMUX_GPIO81__FUNC_I2SOUT5_BCK (MTK_PIN_NO(81) | 4)
+#define PINMUX_GPIO81__FUNC_TP_GPIO0_AO (MTK_PIN_NO(81) | 6)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_SCP_SPI0_CS (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_SPI6_B_CSB (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_I2SOUT5_LRCK (MTK_PIN_NO(82) | 4)
+#define PINMUX_GPIO82__FUNC_TP_GPIO1_AO (MTK_PIN_NO(82) | 6)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_SCP_SPI0_MO (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_SPI6_B_MO (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_I2SOUT5_DATA0 (MTK_PIN_NO(83) | 4)
+#define PINMUX_GPIO83__FUNC_TP_GPIO2_AO (MTK_PIN_NO(83) | 6)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_SCP_SPI0_MI (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_SPI6_B_MI (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_I2SOUT5_DATA1 (MTK_PIN_NO(84) | 4)
+#define PINMUX_GPIO84__FUNC_TP_GPIO3_AO (MTK_PIN_NO(84) | 6)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_SCP_SPI1_CK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SPI7_B_CLK (MTK_PIN_NO(85) | 2)
+#define PINMUX_GPIO85__FUNC_I2SIN5_DATA0 (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_PWM_VLP (MTK_PIN_NO(85) | 5)
+#define PINMUX_GPIO85__FUNC_TP_GPIO4_AO (MTK_PIN_NO(85) | 6)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_SCP_SPI1_CS (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SPI7_B_CSB (MTK_PIN_NO(86) | 2)
+#define PINMUX_GPIO86__FUNC_I2SIN5_DATA1 (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_TP_GPIO5_AO (MTK_PIN_NO(86) | 6)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_SCP_SPI1_MO (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SPI7_B_MO (MTK_PIN_NO(87) | 2)
+#define PINMUX_GPIO87__FUNC_I2SIN5_BCK (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_TP_GPIO6_AO (MTK_PIN_NO(87) | 6)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_SCP_SPI1_MI (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SPI7_B_MI (MTK_PIN_NO(88) | 2)
+#define PINMUX_GPIO88__FUNC_I2SIN5_LRCK (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_TP_GPIO7_AO (MTK_PIN_NO(88) | 6)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_DSI1_TE (MTK_PIN_NO(89) | 2)
+#define PINMUX_GPIO89__FUNC_DBG_MON_B30 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_LCM1_RST (MTK_PIN_NO(90) | 2)
+#define PINMUX_GPIO90__FUNC_DBG_MON_B31 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_CMFLASH2 (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_SF_D0 (MTK_PIN_NO(91) | 2)
+#define PINMUX_GPIO91__FUNC_SRCLKENAI1 (MTK_PIN_NO(91) | 3)
+#define PINMUX_GPIO91__FUNC_KPCOL2 (MTK_PIN_NO(91) | 5)
+#define PINMUX_GPIO91__FUNC_TP_GPIO11_AO (MTK_PIN_NO(91) | 6)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_CMFLASH3 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_SF_D1 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_DISP_PWM1 (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_TP_GPIO12_AO (MTK_PIN_NO(92) | 6)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_CMFLASH1 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_SF_D2 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_SRCLKENAI0 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_KPROW2 (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_TP_GPIO13_AO (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_I2S_MCK1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_SF_D3 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_CLKM0_A (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_GPIO14_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_DBG_MON_B18 (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_I2SIN1_BCK (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_I2SIN4_BCK (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_SPI6_A_CLK (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_CLKM1_A (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_GPIO15_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_DBG_MON_B19 (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_I2SIN1_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2SIN4_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_SPI6_A_CSB (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_CLKM2_A (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_DBG_MON_B20 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_I2SIN1_DI_A (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_SPI6_A_MO (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_CLKM3_A (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_DBG_MON_B21 (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_I2SOUT1_DO (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_SPI6_A_MI (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_DBG_MON_B22 (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_LCM2_RST (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPU0_SCL (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B24 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_DSI2_TE (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_SPU0_SDA (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B25 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_SCL10 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_SF_CS (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_I2SIN5_DATA2 (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_SCP_SCL_OIS (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_TP_GPIO10_AO (MTK_PIN_NO(101) | 6)
+#define PINMUX_GPIO101__FUNC_DBG_MON_B28 (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_SDA10 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_SF_CK (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_I2SIN5_DATA3 (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_SCP_SDA_OIS (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_TP_GPIO11_AO (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B29 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_DISP_PWM (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_DSI1_TE (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_I2S_MCK0 (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_DBG_MON_B23 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SCL6 (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SPU1_SCL (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(104) | 3)
+#define PINMUX_GPIO104__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_I2S_MCK1 (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_IDDIG_2P (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_DBG_MON_B26 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SDA6 (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SPU1_SDA (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_DISP_PWM2 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_2P (MTK_PIN_NO(105) | 4)
+#define PINMUX_GPIO105__FUNC_I2S_MCK2 (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_3P (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_DBG_MON_B27 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SCP_SPI3_CK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SPI3_B_CLK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_MD_UTXD0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(106) | 4)
+#define PINMUX_GPIO106__FUNC_CONN_BG_GPS_MCU_UART0_TXD (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_TP_GPIO6_AO (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_DBG_MON_B0 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_SCP_SPI3_CS (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_SPI3_B_CSB (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_MD_URXD0 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_TP_URXD1_VLP (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_CONN_BG_GPS_MCU_UART0_RXD (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_TP_GPIO7_AO (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_SCP_SPI3_MO (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_SPI3_B_MO (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_MD_UTXD1 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_MD32PCM_UTXD_AO_VLP (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_CONN_BG_GPS_MCU_UART1_TXD (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_TP_GPIO8_AO (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B2 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_SCP_SPI3_MI (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_SPI3_B_MI (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_MD_URXD1 (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_MD32PCM_URXD_AO_VLP (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_CONN_BG_GPS_MCU_UART1_RXD (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_TP_GPIO9_AO (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B3 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_SPI1_CLK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_PWM_0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_MD_UCTS0 (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_SPU0_GPIO_O (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_DBG_MON_B4 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_SPI1_CSB (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_PWM_1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_MD_URTS0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_TP_URTS1_VLP (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_SPU0_GPIO_I (MTK_PIN_NO(111) | 6)
+#define PINMUX_GPIO111__FUNC_DBG_MON_B5 (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_SPI1_MO (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_PWM_2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_MD_UCTS1 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_SPU1_GPIO_O (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_DBG_MON_B6 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_SPI1_MI (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_PWM_3 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_MD_URTS1 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_SPU1_GPIO_I (MTK_PIN_NO(113) | 6)
+#define PINMUX_GPIO113__FUNC_DBG_MON_B7 (MTK_PIN_NO(113) | 7)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI0_SPU_CLK (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SPI4_A_CLK (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_DBG_MON_B8 (MTK_PIN_NO(114) | 7)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI0_SPU_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SPI4_A_CSB (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_DBG_MON_B9 (MTK_PIN_NO(115) | 7)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI0_SPU_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SPI4_A_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_LCM1_RST (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_DBG_MON_B10 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI0_SPU_MI (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SPI4_A_MI (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_DSI1_TE (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_DBG_MON_B11 (MTK_PIN_NO(117) | 7)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SPI5_CLK (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_USB_DRVVBUS (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_DP_TX_HPD (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_AD_ILDO_DTEST0 (MTK_PIN_NO(118) | 4)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SPI5_CSB (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_VBUSVALID (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_DP_OC_EN (MTK_PIN_NO(119) | 3)
+#define PINMUX_GPIO119__FUNC_AD_ILDO_DTEST1 (MTK_PIN_NO(119) | 4)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SPI5_MO (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_LCM2_RST (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(120) | 3)
+#define PINMUX_GPIO120__FUNC_AD_ILDO_DTEST2 (MTK_PIN_NO(120) | 4)
+#define PINMUX_GPIO120__FUNC_IDDIG_3P (MTK_PIN_NO(120) | 6)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SPI5_MI (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_DSI2_TE (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_AD_ILDO_DTEST3 (MTK_PIN_NO(121) | 4)
+#define PINMUX_GPIO121__FUNC_USB_DRVVBUS_3P (MTK_PIN_NO(121) | 6)
+#define PINMUX_GPIO121__FUNC_DBG_MON_B17 (MTK_PIN_NO(121) | 7)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_AP_GOOD (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(122) | 2)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SCL3 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_I2SIN2_LRCK (MTK_PIN_NO(123) | 5)
+#define PINMUX_GPIO123__FUNC_TP_UTXD_MD_VCORE (MTK_PIN_NO(123) | 6)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SDA3 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_TP_URXD_MD_VCORE (MTK_PIN_NO(124) | 6)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_MSDC1_CLK (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(125) | 2)
+#define PINMUX_GPIO125__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_UDI_TCK (MTK_PIN_NO(125) | 4)
+#define PINMUX_GPIO125__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(125) | 5)
+#define PINMUX_GPIO125__FUNC_SCP_JTAG_LITTLE_TCK_VLP (MTK_PIN_NO(125) | 6)
+#define PINMUX_GPIO125__FUNC_JTCK2_SEL1 (MTK_PIN_NO(125) | 7)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_MSDC1_CMD (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UDI_TMS (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_SCP_JTAG_LITTLE_TMS_VLP (MTK_PIN_NO(126) | 6)
+#define PINMUX_GPIO126__FUNC_JTMS2_SEL1 (MTK_PIN_NO(126) | 7)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MSDC1_DAT0 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_UDI_TDI_0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_SCP_JTAG_LITTLE_TDI_VLP (MTK_PIN_NO(127) | 6)
+#define PINMUX_GPIO127__FUNC_JTDI2_SEL1 (MTK_PIN_NO(127) | 7)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MSDC1_DAT1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UDI_TDO_0 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_SCP_JTAG_LITTLE_TDO_VLP (MTK_PIN_NO(128) | 6)
+#define PINMUX_GPIO128__FUNC_JTDO2_SEL1 (MTK_PIN_NO(128) | 7)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_MSDC1_DAT2 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_DSI2_HSYNC (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_UDI_NTRST (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SCP_JTAG_LITTLE_TRSTN_VLP (MTK_PIN_NO(129) | 6)
+#define PINMUX_GPIO129__FUNC_JTRSTN2_SEL1 (MTK_PIN_NO(129) | 7)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_MSDC1_DAT3 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_DSI3_HSYNC (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(130) | 5)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_CLKM0_A (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_TSFDC_SCK (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_CLKM1_B (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(132) | 5)
+#define PINMUX_GPIO132__FUNC_TSFDC_SDI (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(133) | 5)
+#define PINMUX_GPIO133__FUNC_TSFDC_SCF (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_TSFDC_26M (MTK_PIN_NO(134) | 6)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_TSFDC_SDO (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_TSFDC_FOUT (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_BPI_BUS16 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(137) | 6)
+#define PINMUX_GPIO137__FUNC_DBG_MON_A0 (MTK_PIN_NO(137) | 7)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_BPI_BUS17 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_PCM0_LRCK (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(138) | 6)
+#define PINMUX_GPIO138__FUNC_DBG_MON_A1 (MTK_PIN_NO(138) | 7)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_BPI_BUS18 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_MD_GPS_BLANK (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(139) | 6)
+#define PINMUX_GPIO139__FUNC_DBG_MON_A2 (MTK_PIN_NO(139) | 7)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_BPI_BUS19 (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_MD_URXD1_CONN (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(140) | 6)
+#define PINMUX_GPIO140__FUNC_DBG_MON_A3 (MTK_PIN_NO(140) | 7)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_BPI_BUS20 (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(141) | 4)
+#define PINMUX_GPIO141__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(141) | 6)
+#define PINMUX_GPIO141__FUNC_DBG_MON_A4 (MTK_PIN_NO(141) | 7)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_BPI_BUS21 (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(142) | 6)
+#define PINMUX_GPIO142__FUNC_DBG_MON_A5 (MTK_PIN_NO(142) | 7)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_BPI_BUS22 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_BPI_BUS23 (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD_URXD1_CONN (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_BPI_BUS0 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(145) | 6)
+#define PINMUX_GPIO145__FUNC_DBG_MON_A10 (MTK_PIN_NO(145) | 7)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_BPI_BUS1 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(146) | 6)
+#define PINMUX_GPIO146__FUNC_DBG_MON_A11 (MTK_PIN_NO(146) | 7)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_BPI_BUS2 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG_LITTLE_TRSTN_VCORE (MTK_PIN_NO(147) | 6)
+#define PINMUX_GPIO147__FUNC_DBG_MON_A12 (MTK_PIN_NO(147) | 7)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_BPI_BUS3 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_TP_UTXD_MD_VLP (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_TP_GPIO0_AO (MTK_PIN_NO(148) | 5)
+#define PINMUX_GPIO148__FUNC_SCP_JTAG_LITTLE_TCK_VCORE (MTK_PIN_NO(148) | 6)
+#define PINMUX_GPIO148__FUNC_DBG_MON_A13 (MTK_PIN_NO(148) | 7)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_BPI_BUS4 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_TP_URXD_MD_VLP (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_TP_GPIO1_AO (MTK_PIN_NO(149) | 5)
+#define PINMUX_GPIO149__FUNC_SCP_JTAG_LITTLE_TMS_VCORE (MTK_PIN_NO(149) | 6)
+#define PINMUX_GPIO149__FUNC_DBG_MON_A14 (MTK_PIN_NO(149) | 7)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_BPI_BUS5 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_GPS_PPS0 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_TP_GPIO2_AO (MTK_PIN_NO(150) | 5)
+#define PINMUX_GPIO150__FUNC_SCP_JTAG_LITTLE_TDO_VCORE (MTK_PIN_NO(150) | 6)
+#define PINMUX_GPIO150__FUNC_DBG_MON_A15 (MTK_PIN_NO(150) | 7)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_BPI_BUS6 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_GPS_PPS1 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_TP_GPIO3_AO (MTK_PIN_NO(151) | 5)
+#define PINMUX_GPIO151__FUNC_SCP_JTAG_LITTLE_TDI_VCORE (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_BPI_BUS7 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_EDP_TX_HPD (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_AGPS_SYNC (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(152) | 6)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(153) | 6)
+#define PINMUX_GPIO153__FUNC_DBG_MON_A8 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_DIGRF_IRQ (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(154) | 6)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A9 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MIPI_M_SCLK (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_UCTS2 (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_TP_UTXD_CONSYS_VCORE (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_A6 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_MIPI_M_SDATA (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_URTS2 (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_TP_URXD_CONSYS_VCORE (MTK_PIN_NO(156) | 6)
+#define PINMUX_GPIO156__FUNC_DBG_MON_A7 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_BPI_BUS8 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_UTXD2 (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_CLKM0_A (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(157) | 6)
+#define PINMUX_GPIO157__FUNC_DBG_MON_A16 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_BPI_BUS9 (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_URXD2 (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_CLKM1_A (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(158) | 6)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_BPI_BUS10 (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_MD_INT0 (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_SRCLKENAI1 (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_CLKM2_A (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(159) | 6)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_UTXD0 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_MD_UTXD1 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(160) | 5)
+#define PINMUX_GPIO160__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(160) | 6)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_URXD0 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_MD_URXD1 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(161) | 5)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_UTXD1 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_MD_UTXD0 (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(162) | 3)
+#define PINMUX_GPIO162__FUNC_ADSP_UTXD0 (MTK_PIN_NO(162) | 4)
+#define PINMUX_GPIO162__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(162) | 5)
+#define PINMUX_GPIO162__FUNC_HFRP_UTXD1 (MTK_PIN_NO(162) | 6)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_URXD1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_MD_URXD0 (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_TP_URXD1_VLP (MTK_PIN_NO(163) | 3)
+#define PINMUX_GPIO163__FUNC_ADSP_URXD0 (MTK_PIN_NO(163) | 4)
+#define PINMUX_GPIO163__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(163) | 5)
+#define PINMUX_GPIO163__FUNC_HFRP_URXD1 (MTK_PIN_NO(163) | 6)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_SCP_SCL0 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_TP_GPIO0_AO (MTK_PIN_NO(164) | 6)
+#define PINMUX_GPIO164__FUNC_DBG_MON_A22 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_SCP_SDA0 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_TP_GPIO1_AO (MTK_PIN_NO(165) | 6)
+#define PINMUX_GPIO165__FUNC_DBG_MON_A23 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_SCP_SCL2 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_TP_GPIO2_AO (MTK_PIN_NO(166) | 6)
+#define PINMUX_GPIO166__FUNC_DBG_MON_A24 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_SCP_SDA2 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_TP_GPIO3_AO (MTK_PIN_NO(167) | 6)
+#define PINMUX_GPIO167__FUNC_DBG_MON_A25 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_SCP_SPI2_CK (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI2_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_PWM_VLP (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_SCP_SCL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_DBG_MON_A26 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_SCP_SPI2_CS (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI2_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_DBG_MON_A27 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_SCP_SPI2_MO (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI2_B_MO (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_SCP_SDA2 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_DBG_MON_A28 (MTK_PIN_NO(170) | 7)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_SCP_SPI2_MI (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI2_B_MI (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_DBG_MON_A29 (MTK_PIN_NO(171) | 7)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(172) | 1)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CMFLASH3 (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_PWM_3 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(173) | 3)
+#define PINMUX_GPIO173__FUNC_CLKM1_A (MTK_PIN_NO(173) | 4)
+#define PINMUX_GPIO173__FUNC_DBG_MON_A31 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CMFLASH0 (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_PWM_0 (MTK_PIN_NO(174) | 2)
+#define PINMUX_GPIO174__FUNC_VBUSVALID_1P (MTK_PIN_NO(174) | 3)
+#define PINMUX_GPIO174__FUNC_MD32_2_RXD (MTK_PIN_NO(174) | 4)
+#define PINMUX_GPIO174__FUNC_DISP_PWM3 (MTK_PIN_NO(174) | 5)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CMFLASH1 (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_PWM_1 (MTK_PIN_NO(175) | 2)
+#define PINMUX_GPIO175__FUNC_EDP_TX_HPD (MTK_PIN_NO(175) | 3)
+#define PINMUX_GPIO175__FUNC_MD32_2_TXD (MTK_PIN_NO(175) | 4)
+#define PINMUX_GPIO175__FUNC_DISP_PWM4 (MTK_PIN_NO(175) | 5)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_SCL5 (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_LCM3_RST (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_MD_URXD1_CONN (MTK_PIN_NO(176) | 4)
+#define PINMUX_GPIO176__FUNC_TP_UTXD_GNSS_VCORE (MTK_PIN_NO(176) | 6)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_SDA5 (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_DSI3_TE (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(177) | 4)
+#define PINMUX_GPIO177__FUNC_TP_URXD_GNSS_VCORE (MTK_PIN_NO(177) | 6)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_DMIC_CLK (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(178) | 2)
+#define PINMUX_GPIO178__FUNC_SRCLKENAI0 (MTK_PIN_NO(178) | 3)
+#define PINMUX_GPIO178__FUNC_CLKM2_B (MTK_PIN_NO(178) | 4)
+#define PINMUX_GPIO178__FUNC_TP_GPIO7_AO (MTK_PIN_NO(178) | 5)
+#define PINMUX_GPIO178__FUNC_SPU1_UTX (MTK_PIN_NO(178) | 6)
+#define PINMUX_GPIO178__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_DMIC_DAT (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_SRCLKENAI1 (MTK_PIN_NO(179) | 3)
+#define PINMUX_GPIO179__FUNC_CLKM3_B (MTK_PIN_NO(179) | 4)
+#define PINMUX_GPIO179__FUNC_TP_GPIO8_AO (MTK_PIN_NO(179) | 5)
+#define PINMUX_GPIO179__FUNC_SPU1_URX (MTK_PIN_NO(179) | 6)
+#define PINMUX_GPIO179__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_IDDIG_1P (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_CMVREF0 (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_GPS_PPS1 (MTK_PIN_NO(180) | 3)
+#define PINMUX_GPIO180__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(180) | 4)
+#define PINMUX_GPIO180__FUNC_DISP_PWM1 (MTK_PIN_NO(180) | 5)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_CMVREF1 (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(181) | 3)
+#define PINMUX_GPIO181__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(181) | 4)
+#define PINMUX_GPIO181__FUNC_HFRP_JTAG1_TRSTN (MTK_PIN_NO(181) | 5)
+#define PINMUX_GPIO181__FUNC_SPU1_NTRST (MTK_PIN_NO(181) | 6)
+#define PINMUX_GPIO181__FUNC_CONN_BG_GPS_MCU_TRST_B (MTK_PIN_NO(181) | 7)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_SCL11 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_CMVREF2 (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(182) | 3)
+#define PINMUX_GPIO182__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(182) | 4)
+#define PINMUX_GPIO182__FUNC_HFRP_JTAG1_TCK (MTK_PIN_NO(182) | 5)
+#define PINMUX_GPIO182__FUNC_SPU1_TCK (MTK_PIN_NO(182) | 6)
+#define PINMUX_GPIO182__FUNC_CONN_BG_GPS_MCU_TCK (MTK_PIN_NO(182) | 7)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_SDA11 (MTK_PIN_NO(183) | 1)
+#define PINMUX_GPIO183__FUNC_CMVREF3 (MTK_PIN_NO(183) | 2)
+#define PINMUX_GPIO183__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(183) | 3)
+#define PINMUX_GPIO183__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(183) | 4)
+#define PINMUX_GPIO183__FUNC_HFRP_JTAG1_TMS (MTK_PIN_NO(183) | 5)
+#define PINMUX_GPIO183__FUNC_SPU1_TMS (MTK_PIN_NO(183) | 6)
+#define PINMUX_GPIO183__FUNC_CONN_BG_GPS_MCU_TMS (MTK_PIN_NO(183) | 7)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_SCL12 (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_CMVREF4 (MTK_PIN_NO(184) | 2)
+#define PINMUX_GPIO184__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(184) | 3)
+#define PINMUX_GPIO184__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(184) | 4)
+#define PINMUX_GPIO184__FUNC_HFRP_JTAG1_TDO (MTK_PIN_NO(184) | 5)
+#define PINMUX_GPIO184__FUNC_SPU1_TDO (MTK_PIN_NO(184) | 6)
+#define PINMUX_GPIO184__FUNC_CONN_BG_GPS_MCU_TDO (MTK_PIN_NO(184) | 7)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_SDA12 (MTK_PIN_NO(185) | 1)
+#define PINMUX_GPIO185__FUNC_CMVREF5 (MTK_PIN_NO(185) | 2)
+#define PINMUX_GPIO185__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(185) | 3)
+#define PINMUX_GPIO185__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(185) | 4)
+#define PINMUX_GPIO185__FUNC_HFRP_JTAG1_TDI (MTK_PIN_NO(185) | 5)
+#define PINMUX_GPIO185__FUNC_SPU1_TDI (MTK_PIN_NO(185) | 6)
+#define PINMUX_GPIO185__FUNC_CONN_BG_GPS_MCU_TDI (MTK_PIN_NO(185) | 7)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_PMSR_SMAP (MTK_PIN_NO(186) | 2)
+#define PINMUX_GPIO186__FUNC_TP_GPIO2_AO (MTK_PIN_NO(186) | 3)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(187) | 1)
+#define PINMUX_GPIO187__FUNC_TP_GPIO4_AO (MTK_PIN_NO(187) | 3)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_SCL2 (MTK_PIN_NO(188) | 1)
+#define PINMUX_GPIO188__FUNC_SCP_SCL8 (MTK_PIN_NO(188) | 2)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_SDA2 (MTK_PIN_NO(189) | 1)
+#define PINMUX_GPIO189__FUNC_SCP_SDA8 (MTK_PIN_NO(189) | 2)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_SCL4 (MTK_PIN_NO(190) | 1)
+#define PINMUX_GPIO190__FUNC_SCP_SCL9 (MTK_PIN_NO(190) | 2)
+#define PINMUX_GPIO190__FUNC_UDI_TDI_6 (MTK_PIN_NO(190) | 6)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_SDA4 (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_SCP_SDA9 (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_UDI_TDI_7 (MTK_PIN_NO(191) | 6)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_CMMCLK2 (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_MD32_3_RXD (MTK_PIN_NO(192) | 4)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_CLKM0_B (MTK_PIN_NO(193) | 3)
+#define PINMUX_GPIO193__FUNC_MD32_3_TXD (MTK_PIN_NO(193) | 4)
+#define PINMUX_GPIO193__FUNC_UDI_TDO_7 (MTK_PIN_NO(193) | 6)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_SCL7 (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_CLKM2_B (MTK_PIN_NO(194) | 3)
+#define PINMUX_GPIO194__FUNC_UDI_TDI_2 (MTK_PIN_NO(194) | 6)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SDA7 (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_CLKM3_B (MTK_PIN_NO(195) | 3)
+#define PINMUX_GPIO195__FUNC_UDI_TDI_3 (MTK_PIN_NO(195) | 6)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_CMMCLK3 (MTK_PIN_NO(196) | 1)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_CLKM1_B (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_UDI_TDI_1 (MTK_PIN_NO(197) | 6)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_SCL8 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_UDI_TDI_4 (MTK_PIN_NO(198) | 6)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_SDA8 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_UDI_TDI_5 (MTK_PIN_NO(199) | 6)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL1 (MTK_PIN_NO(200) | 1)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA1 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_TSFDC_BG_COMP (MTK_PIN_NO(201) | 7)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL9 (MTK_PIN_NO(202) | 1)
+#define PINMUX_GPIO202__FUNC_SCP_SCL7 (MTK_PIN_NO(202) | 2)
+#define PINMUX_GPIO202__FUNC_TP_GPIO15_AO (MTK_PIN_NO(202) | 6)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA9 (MTK_PIN_NO(203) | 1)
+#define PINMUX_GPIO203__FUNC_SCP_SDA7 (MTK_PIN_NO(203) | 2)
+#define PINMUX_GPIO203__FUNC_TP_GPIO9_AO (MTK_PIN_NO(203) | 6)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL13 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_CMVREF6 (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(204) | 3)
+#define PINMUX_GPIO204__FUNC_CLKM2_B (MTK_PIN_NO(204) | 5)
+#define PINMUX_GPIO204__FUNC_TP_GPIO12_AO (MTK_PIN_NO(204) | 6)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA13 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_CMVREF7 (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(205) | 3)
+#define PINMUX_GPIO205__FUNC_CLKM3_B (MTK_PIN_NO(205) | 5)
+#define PINMUX_GPIO205__FUNC_TP_GPIO13_AO (MTK_PIN_NO(205) | 6)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(206) | 2)
+#define PINMUX_GPIO206__FUNC_VBUSVALID (MTK_PIN_NO(206) | 5)
+#define PINMUX_GPIO206__FUNC_UDI_TDO_3 (MTK_PIN_NO(206) | 6)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_PCIE_WAKEN_2P (MTK_PIN_NO(207) | 1)
+#define PINMUX_GPIO207__FUNC_PMSR_SMAP_MAX (MTK_PIN_NO(207) | 2)
+#define PINMUX_GPIO207__FUNC_FMI2S_A_BCK (MTK_PIN_NO(207) | 4)
+#define PINMUX_GPIO207__FUNC_UDI_TDO_4 (MTK_PIN_NO(207) | 6)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_PCIE_CLKREQN_2P (MTK_PIN_NO(208) | 1)
+#define PINMUX_GPIO208__FUNC_PMSR_SMAP_MAX_W (MTK_PIN_NO(208) | 2)
+#define PINMUX_GPIO208__FUNC_FMI2S_A_LRCK (MTK_PIN_NO(208) | 4)
+#define PINMUX_GPIO208__FUNC_CLKM0_B (MTK_PIN_NO(208) | 5)
+#define PINMUX_GPIO208__FUNC_UDI_TDO_5 (MTK_PIN_NO(208) | 6)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PCIE_PERSTN_2P (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PMSR_SMAP (MTK_PIN_NO(209) | 2)
+#define PINMUX_GPIO209__FUNC_FMI2S_A_DI (MTK_PIN_NO(209) | 4)
+#define PINMUX_GPIO209__FUNC_CLKM1_B (MTK_PIN_NO(209) | 5)
+#define PINMUX_GPIO209__FUNC_UDI_TDO_6 (MTK_PIN_NO(209) | 6)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_CMMCLK4 (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_CMMCLK5 (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_CMMCLK6 (MTK_PIN_NO(212) | 1)
+#define PINMUX_GPIO212__FUNC_TP_GPIO10_AO (MTK_PIN_NO(212) | 2)
+#define PINMUX_GPIO212__FUNC_IDDIG (MTK_PIN_NO(212) | 5)
+#define PINMUX_GPIO212__FUNC_UDI_TDO_1 (MTK_PIN_NO(212) | 6)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_CMMCLK7 (MTK_PIN_NO(213) | 1)
+#define PINMUX_GPIO213__FUNC_TP_GPIO11_AO (MTK_PIN_NO(213) | 2)
+#define PINMUX_GPIO213__FUNC_USB_DRVVBUS (MTK_PIN_NO(213) | 5)
+#define PINMUX_GPIO213__FUNC_UDI_TDO_2 (MTK_PIN_NO(213) | 6)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_SCP_SCL3 (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_SDA14_E1 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_SCL14_E2 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_GBE1_MDC (MTK_PIN_NO(214) | 6)
+#define PINMUX_GPIO214__FUNC_GBE0_MDC (MTK_PIN_NO(214) | 7)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_SCP_SDA3 (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_SCL14_E1 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_SDA14_E2 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_GBE1_MDIO (MTK_PIN_NO(215) | 6)
+#define PINMUX_GPIO215__FUNC_GBE0_MDIO (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_GPS_PPS0 (MTK_PIN_NO(216) | 1)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_KPROW0 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_TP_GPIO12_AO (MTK_PIN_NO(217) | 6)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_KPROW1 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_SPI0_WP (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_TP_GPIO14_AO (MTK_PIN_NO(218) | 6)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_KPCOL1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_SPI0_HOLD (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(219) | 7)
+
+#define PINMUX_GPIO220__FUNC_GPIO220 (MTK_PIN_NO(220) | 0)
+#define PINMUX_GPIO220__FUNC_SPI0_CLK (MTK_PIN_NO(220) | 1)
+#define PINMUX_GPIO220__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(220) | 6)
+#define PINMUX_GPIO220__FUNC_JTCK_SEL1 (MTK_PIN_NO(220) | 7)
+
+#define PINMUX_GPIO221__FUNC_GPIO221 (MTK_PIN_NO(221) | 0)
+#define PINMUX_GPIO221__FUNC_SPI0_CSB (MTK_PIN_NO(221) | 1)
+#define PINMUX_GPIO221__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(221) | 6)
+#define PINMUX_GPIO221__FUNC_JTMS_SEL1 (MTK_PIN_NO(221) | 7)
+
+#define PINMUX_GPIO222__FUNC_GPIO222 (MTK_PIN_NO(222) | 0)
+#define PINMUX_GPIO222__FUNC_SPI0_MO (MTK_PIN_NO(222) | 1)
+#define PINMUX_GPIO222__FUNC_SCP_SCL7 (MTK_PIN_NO(222) | 2)
+#define PINMUX_GPIO222__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(222) | 6)
+#define PINMUX_GPIO222__FUNC_JTDO_SEL1 (MTK_PIN_NO(222) | 7)
+
+#define PINMUX_GPIO223__FUNC_GPIO223 (MTK_PIN_NO(223) | 0)
+#define PINMUX_GPIO223__FUNC_SPI0_MI (MTK_PIN_NO(223) | 1)
+#define PINMUX_GPIO223__FUNC_SCP_SDA7 (MTK_PIN_NO(223) | 2)
+#define PINMUX_GPIO223__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(223) | 6)
+#define PINMUX_GPIO223__FUNC_JTDI_SEL1 (MTK_PIN_NO(223) | 7)
+
+#define PINMUX_GPIO224__FUNC_GPIO224 (MTK_PIN_NO(224) | 0)
+#define PINMUX_GPIO224__FUNC_MSDC2_CLK (MTK_PIN_NO(224) | 1)
+#define PINMUX_GPIO224__FUNC_DMIC2_CLK (MTK_PIN_NO(224) | 2)
+#define PINMUX_GPIO224__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(224) | 3)
+#define PINMUX_GPIO224__FUNC_GBE0_TXER (MTK_PIN_NO(224) | 4)
+#define PINMUX_GPIO224__FUNC_GBE1_TXER (MTK_PIN_NO(224) | 5)
+#define PINMUX_GPIO224__FUNC_GBE1_AUX_PPS0 (MTK_PIN_NO(224) | 6)
+#define PINMUX_GPIO224__FUNC_MD32_1_TXD (MTK_PIN_NO(224) | 7)
+
+#define PINMUX_GPIO225__FUNC_GPIO225 (MTK_PIN_NO(225) | 0)
+#define PINMUX_GPIO225__FUNC_MSDC2_CMD (MTK_PIN_NO(225) | 1)
+#define PINMUX_GPIO225__FUNC_DMIC2_DAT (MTK_PIN_NO(225) | 2)
+#define PINMUX_GPIO225__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(225) | 3)
+#define PINMUX_GPIO225__FUNC_GBE0_RXER (MTK_PIN_NO(225) | 4)
+#define PINMUX_GPIO225__FUNC_GBE1_RXER (MTK_PIN_NO(225) | 5)
+#define PINMUX_GPIO225__FUNC_GBE1_AUX_PPS1 (MTK_PIN_NO(225) | 6)
+#define PINMUX_GPIO225__FUNC_MD32_1_RXD (MTK_PIN_NO(225) | 7)
+
+#define PINMUX_GPIO226__FUNC_GPIO226 (MTK_PIN_NO(226) | 0)
+#define PINMUX_GPIO226__FUNC_MSDC2_DAT0 (MTK_PIN_NO(226) | 1)
+#define PINMUX_GPIO226__FUNC_I2SIN3_BCK (MTK_PIN_NO(226) | 2)
+#define PINMUX_GPIO226__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(226) | 3)
+#define PINMUX_GPIO226__FUNC_GBE0_COL (MTK_PIN_NO(226) | 4)
+#define PINMUX_GPIO226__FUNC_GBE1_COL (MTK_PIN_NO(226) | 5)
+#define PINMUX_GPIO226__FUNC_GBE1_AUX_PPS2 (MTK_PIN_NO(226) | 6)
+#define PINMUX_GPIO226__FUNC_GBE1_MDC (MTK_PIN_NO(226) | 7)
+
+#define PINMUX_GPIO227__FUNC_GPIO227 (MTK_PIN_NO(227) | 0)
+#define PINMUX_GPIO227__FUNC_MSDC2_DAT1 (MTK_PIN_NO(227) | 1)
+#define PINMUX_GPIO227__FUNC_I2SIN3_LRCK (MTK_PIN_NO(227) | 2)
+#define PINMUX_GPIO227__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(227) | 3)
+#define PINMUX_GPIO227__FUNC_GBE0_INTR (MTK_PIN_NO(227) | 4)
+#define PINMUX_GPIO227__FUNC_GBE1_INTR (MTK_PIN_NO(227) | 5)
+#define PINMUX_GPIO227__FUNC_GBE1_AUX_PPS3 (MTK_PIN_NO(227) | 6)
+#define PINMUX_GPIO227__FUNC_GBE1_MDIO (MTK_PIN_NO(227) | 7)
+
+#define PINMUX_GPIO228__FUNC_GPIO228 (MTK_PIN_NO(228) | 0)
+#define PINMUX_GPIO228__FUNC_MSDC2_DAT2 (MTK_PIN_NO(228) | 1)
+#define PINMUX_GPIO228__FUNC_I2SIN3_DI (MTK_PIN_NO(228) | 2)
+#define PINMUX_GPIO228__FUNC_GBE0_MDC (MTK_PIN_NO(228) | 3)
+#define PINMUX_GPIO228__FUNC_GBE1_MDC (MTK_PIN_NO(228) | 4)
+#define PINMUX_GPIO228__FUNC_CONN_BG_GPS_MCU_AICE_TCKC (MTK_PIN_NO(228) | 5)
+
+#define PINMUX_GPIO229__FUNC_GPIO229 (MTK_PIN_NO(229) | 0)
+#define PINMUX_GPIO229__FUNC_MSDC2_DAT3 (MTK_PIN_NO(229) | 1)
+#define PINMUX_GPIO229__FUNC_I2SOUT3_DO (MTK_PIN_NO(229) | 2)
+#define PINMUX_GPIO229__FUNC_GBE0_MDIO (MTK_PIN_NO(229) | 3)
+#define PINMUX_GPIO229__FUNC_GBE1_MDIO (MTK_PIN_NO(229) | 4)
+#define PINMUX_GPIO229__FUNC_CONN_BG_GPS_MCU_AICE_TMSC (MTK_PIN_NO(229) | 5)
+#define PINMUX_GPIO229__FUNC_AVB_CLK2 (MTK_PIN_NO(229) | 7)
+
+#define PINMUX_GPIO230__FUNC_GPIO230 (MTK_PIN_NO(230) | 0)
+#define PINMUX_GPIO230__FUNC_CONN_TOP_CLK (MTK_PIN_NO(230) | 1)
+
+#define PINMUX_GPIO231__FUNC_GPIO231 (MTK_PIN_NO(231) | 0)
+#define PINMUX_GPIO231__FUNC_CONN_TOP_DATA (MTK_PIN_NO(231) | 1)
+
+#define PINMUX_GPIO232__FUNC_GPIO232 (MTK_PIN_NO(232) | 0)
+#define PINMUX_GPIO232__FUNC_CONN_HRST_B (MTK_PIN_NO(232) | 1)
+
+#define PINMUX_GPIO233__FUNC_GPIO233 (MTK_PIN_NO(233) | 0)
+#define PINMUX_GPIO233__FUNC_I2SIN0_BCK (MTK_PIN_NO(233) | 1)
+
+#define PINMUX_GPIO234__FUNC_GPIO234 (MTK_PIN_NO(234) | 0)
+#define PINMUX_GPIO234__FUNC_I2SIN0_LRCK (MTK_PIN_NO(234) | 1)
+
+#define PINMUX_GPIO235__FUNC_GPIO235 (MTK_PIN_NO(235) | 0)
+#define PINMUX_GPIO235__FUNC_I2SIN0_DI (MTK_PIN_NO(235) | 1)
+
+#define PINMUX_GPIO236__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define PINMUX_GPIO236__FUNC_I2SOUT0_DO (MTK_PIN_NO(236) | 1)
+
+#define PINMUX_GPIO237__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define PINMUX_GPIO237__FUNC_CONN_UARTHUB_UART_TX (MTK_PIN_NO(237) | 1)
+#define PINMUX_GPIO237__FUNC_UTXD3 (MTK_PIN_NO(237) | 3)
+
+#define PINMUX_GPIO238__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define PINMUX_GPIO238__FUNC_CONN_UARTHUB_UART_RX (MTK_PIN_NO(238) | 1)
+#define PINMUX_GPIO238__FUNC_URXD3 (MTK_PIN_NO(238) | 3)
+
+#define PINMUX_GPIO239__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define PINMUX_GPIO239__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(239) | 1)
+#define PINMUX_GPIO239__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(239) | 2)
+
+#define PINMUX_GPIO240__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define PINMUX_GPIO240__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(240) | 1)
+#define PINMUX_GPIO240__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(240) | 2)
+
+#define PINMUX_GPIO241__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define PINMUX_GPIO241__FUNC_PCIE_PERSTN (MTK_PIN_NO(241) | 1)
+
+#define PINMUX_GPIO242__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define PINMUX_GPIO242__FUNC_PCIE_WAKEN (MTK_PIN_NO(242) | 1)
+
+#define PINMUX_GPIO243__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define PINMUX_GPIO243__FUNC_PCIE_CLKREQN (MTK_PIN_NO(243) | 1)
+
+#define PINMUX_GPIO244__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define PINMUX_GPIO244__FUNC_CONN_RST (MTK_PIN_NO(244) | 1)
+
+#define PINMUX_GPIO245__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+
+#define PINMUX_GPIO246__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+#define PINMUX_GPIO246__FUNC_CONN_PTA_TXD0 (MTK_PIN_NO(246) | 1)
+
+#define PINMUX_GPIO247__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define PINMUX_GPIO247__FUNC_CONN_PTA_RXD0 (MTK_PIN_NO(247) | 1)
+
+#define PINMUX_GPIO248__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define PINMUX_GPIO248__FUNC_UCTS3 (MTK_PIN_NO(248) | 3)
+
+#define PINMUX_GPIO249__FUNC_GPIO249 (MTK_PIN_NO(249) | 0)
+#define PINMUX_GPIO249__FUNC_URTS3 (MTK_PIN_NO(249) | 3)
+
+#define PINMUX_GPIO250__FUNC_GPIO250 (MTK_PIN_NO(250) | 0)
+
+#define PINMUX_GPIO251__FUNC_GPIO251 (MTK_PIN_NO(251) | 0)
+#define PINMUX_GPIO251__FUNC_IDDIG_1P (MTK_PIN_NO(251) | 1)
+
+#define PINMUX_GPIO252__FUNC_GPIO252 (MTK_PIN_NO(252) | 0)
+#define PINMUX_GPIO252__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(252) | 1)
+
+#define PINMUX_GPIO253__FUNC_GPIO253 (MTK_PIN_NO(253) | 0)
+#define PINMUX_GPIO253__FUNC_VBUSVALID_1P (MTK_PIN_NO(253) | 1)
+
+#define PINMUX_GPIO254__FUNC_GPIO254 (MTK_PIN_NO(254) | 0)
+#define PINMUX_GPIO254__FUNC_IDDIG_2P (MTK_PIN_NO(254) | 1)
+
+#define PINMUX_GPIO255__FUNC_GPIO255 (MTK_PIN_NO(255) | 0)
+#define PINMUX_GPIO255__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(255) | 1)
+
+#define PINMUX_GPIO256__FUNC_GPIO256 (MTK_PIN_NO(256) | 0)
+#define PINMUX_GPIO256__FUNC_VBUSVALID_2P (MTK_PIN_NO(256) | 1)
+
+#define PINMUX_GPIO257__FUNC_GPIO257 (MTK_PIN_NO(257) | 0)
+#define PINMUX_GPIO257__FUNC_VBUSVALID_3P (MTK_PIN_NO(257) | 1)
+
+#define PINMUX_GPIO258__FUNC_GPIO258 (MTK_PIN_NO(258) | 0)
+#define PINMUX_GPIO258__FUNC_AVB_CLK1 (MTK_PIN_NO(258) | 7)
+
+#define PINMUX_GPIO259__FUNC_GPIO259 (MTK_PIN_NO(259) | 0)
+#define PINMUX_GPIO259__FUNC_GBE0_TXD0 (MTK_PIN_NO(259) | 1)
+#define PINMUX_GPIO259__FUNC_GBE1_TXD0 (MTK_PIN_NO(259) | 2)
+
+#define PINMUX_GPIO260__FUNC_GPIO260 (MTK_PIN_NO(260) | 0)
+#define PINMUX_GPIO260__FUNC_GBE0_TXD1 (MTK_PIN_NO(260) | 1)
+#define PINMUX_GPIO260__FUNC_GBE1_TXD1 (MTK_PIN_NO(260) | 2)
+
+#define PINMUX_GPIO261__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define PINMUX_GPIO261__FUNC_GBE0_TXC (MTK_PIN_NO(261) | 1)
+#define PINMUX_GPIO261__FUNC_GBE1_TXC (MTK_PIN_NO(261) | 2)
+
+#define PINMUX_GPIO262__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define PINMUX_GPIO262__FUNC_GBE0_TXEN (MTK_PIN_NO(262) | 1)
+#define PINMUX_GPIO262__FUNC_GBE1_TXEN (MTK_PIN_NO(262) | 2)
+
+#define PINMUX_GPIO263__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define PINMUX_GPIO263__FUNC_GBE0_RXD0 (MTK_PIN_NO(263) | 1)
+#define PINMUX_GPIO263__FUNC_GBE1_RXD0 (MTK_PIN_NO(263) | 2)
+#define PINMUX_GPIO263__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(263) | 3)
+
+#define PINMUX_GPIO264__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define PINMUX_GPIO264__FUNC_GBE0_RXD1 (MTK_PIN_NO(264) | 1)
+#define PINMUX_GPIO264__FUNC_GBE1_RXD1 (MTK_PIN_NO(264) | 2)
+#define PINMUX_GPIO264__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(264) | 3)
+
+#define PINMUX_GPIO265__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define PINMUX_GPIO265__FUNC_GBE0_RXC (MTK_PIN_NO(265) | 1)
+#define PINMUX_GPIO265__FUNC_GBE1_RXC (MTK_PIN_NO(265) | 2)
+#define PINMUX_GPIO265__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(265) | 3)
+
+#define PINMUX_GPIO266__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define PINMUX_GPIO266__FUNC_GBE0_RXDV (MTK_PIN_NO(266) | 1)
+#define PINMUX_GPIO266__FUNC_GBE1_RXDV (MTK_PIN_NO(266) | 2)
+#define PINMUX_GPIO266__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(266) | 3)
+
+#define PINMUX_GPIO267__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define PINMUX_GPIO267__FUNC_GBE0_TXD2 (MTK_PIN_NO(267) | 1)
+#define PINMUX_GPIO267__FUNC_GBE1_TXD2 (MTK_PIN_NO(267) | 2)
+#define PINMUX_GPIO267__FUNC_GBE0_RXER (MTK_PIN_NO(267) | 3)
+#define PINMUX_GPIO267__FUNC_GBE1_RXER (MTK_PIN_NO(267) | 4)
+
+#define PINMUX_GPIO268__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define PINMUX_GPIO268__FUNC_GBE0_TXD3 (MTK_PIN_NO(268) | 1)
+#define PINMUX_GPIO268__FUNC_GBE1_TXD3 (MTK_PIN_NO(268) | 2)
+
+#define PINMUX_GPIO269__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define PINMUX_GPIO269__FUNC_GBE0_RXD2 (MTK_PIN_NO(269) | 1)
+#define PINMUX_GPIO269__FUNC_GBE1_RXD2 (MTK_PIN_NO(269) | 2)
+#define PINMUX_GPIO269__FUNC_GBE0_MDC (MTK_PIN_NO(269) | 3)
+
+#define PINMUX_GPIO270__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define PINMUX_GPIO270__FUNC_GBE0_RXD3 (MTK_PIN_NO(270) | 1)
+#define PINMUX_GPIO270__FUNC_GBE1_RXD3 (MTK_PIN_NO(270) | 2)
+#define PINMUX_GPIO270__FUNC_GBE0_MDIO (MTK_PIN_NO(270) | 3)
+
+#endif /* __MT8196_PINFUNC_H */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8365-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 1f8584bd66c3..c8418888268d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -78,6 +78,21 @@
 		enable-active-high;
 	};
 
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch0_fixed_3v3: regulator-vio33tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -324,6 +339,18 @@
 			};
 		};
 	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 78 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		irq-gpios = <&pio 78 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 79 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6357_vrf12_reg>;
+	};
 };
 
 &mmc0 {
@@ -650,6 +677,19 @@
 		};
 	};
 
+	touch_pins: touch-pins {
+		ctp-int1-pins {
+			pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+			input-enable;
+			bias-disable;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+			output-low;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
index 60139e6dffd8..eaf45d42cd34 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -21,6 +21,7 @@
 
 / {
 	aliases {
+		dsi0 = &disp_dsi0;
 		ethernet0 = &eth;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
@@ -34,6 +35,15 @@
 		serial0 = &uart0;
 	};
 
+	backlight_lcm1: backlight-lcm1 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&reg_vsys>;
+		pwms = <&disp_pwm1 0 500000>;
+	};
+
 	chosen {
 		stdout-path = "serial0:921600n8";
 	};
@@ -227,6 +237,28 @@
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 	};
+
+	lcm1_iovcc: regulator-vio18-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	lcm1_vddp: regulator-vsys-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm1";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vsys>;
+	};
 };
 
 &adsp {
@@ -239,6 +271,67 @@
 	status = "okay";
 };
 
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm1_iovcc>;
+		vdd-supply = <&lcm1_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
 &gpu {
 	mali-supply = <&mt6359_vproc2_buck_reg>;
 	status = "okay";
@@ -390,6 +483,10 @@
 	domain-supply = <&mt6359_vsram_others_ldo_reg>;
 };
 
+&mipi_tx_config0 {
+	status = "okay";
+};
+
 &mmc0 {
 	status = "okay";
 	pinctrl-names = "default", "state_uhs";
@@ -499,9 +596,13 @@
 	mediatek,mic-type-1 = <3>; /* DCC */
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pcie {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_pins_default>;
+	pinctrl-0 = <&pcie_default_pins>;
 	status = "okay";
 };
 
@@ -537,6 +638,12 @@
 		};
 	};
 
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+		};
+	};
+
 	dptx_pins: dptx-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
@@ -857,25 +964,27 @@
 		};
 	};
 
-	panel_default_pins: panel-default-pins {
-		pins-dcdc {
-			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
-			output-low;
-		};
-
-		pins-en {
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
 			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
 			output-low;
 		};
+	};
 
+	panel_default_pins: panel-default-pins {
 		pins-rst {
 			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
-			output-high;
+			output-low;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			output-low;
 		};
 	};
 
-	pcie_pins_default: pcie-default {
-		mux {
+	pcie_default_pins: pcie-default-pins {
+		pins {
 			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
 				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
 				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
@@ -1055,7 +1164,19 @@
 	};
 };
 
-&scp {
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
 	memory-region = <&scp_mem>;
 	status = "okay";
 };
@@ -1119,6 +1240,18 @@
 	status = "okay";
 };
 
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
 &u3phy0 {
 	status = "okay";
 };
@@ -1199,8 +1332,18 @@
 };
 
 &ssusb2 {
+	/*
+	 * the ssusb2 controller is one but we got two ports : one is routed
+	 * to the M.2 slot, the other is on the RPi header who does support
+	 * full OTG.
+	 * As the controller is shared between them, the role switch default
+	 * mode is set to host to make any peripheral inserted in the M.2
+	 * slot (i.e BT/WIFI module) be detected when the other port is
+	 * unused.
+	 */
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
+	role-switch-default-mode = "host";
 	usb-role-switch;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	wakeup-source;
@@ -1211,7 +1354,7 @@
 	connector {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		type = "micro";
-		id-gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
 		vbus-supply = <&usb_p2_vbus>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index f02c32def593..c1fb4b75c530 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -91,13 +91,12 @@
 		};
 	};
 
-	backlight_lcd0: backlight-lcd0 {
+	backlight_lcm0: backlight-lcm0 {
 		compatible = "pwm-backlight";
-		pwms = <&disp_pwm0 0 500000>;
-		enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
 		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
 		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
 	};
 
 	backlight_lcd1: backlight-lcd1 {
@@ -107,6 +106,7 @@
 		brightness-levels = <0 1023>;
 		num-interpolated-steps = <1023>;
 		default-brightness-level = <576>;
+		status = "disabled";
 	};
 
 	can_clk: can-clk {
@@ -150,6 +150,24 @@
 		};
 	};
 
+	lcm0_iovcc: regulator-vio18-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm0";
+		enable-active-high;
+		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&mt6360_ldo2>;
+	};
+
+	lcm0_vddp: regulator-vsys-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm0";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&mt6360_ldo1>;
+	};
+
 	wifi_fixed_3v3: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3";
@@ -163,14 +181,65 @@
 
 &disp_pwm0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_default_pins>;
+	pinctrl-0 = <&disp_pwm0_pins>;
 	status = "okay";
 };
 
+&dither0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
 &dmic_codec {
 	wakeup-delay-ms = <200>;
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm0>;
+		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm0_iovcc>;
+		vdd-supply = <&lcm0_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
 &eth {
 	phy-mode ="rgmii-rxid";
 	phy-handle = <&eth_phy0>;
@@ -194,6 +263,10 @@
 	};
 };
 
+&gamma0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
 &gpu {
 	mali-supply = <&mt6315_7_vbuck1>;
 	status = "okay";
@@ -418,6 +491,10 @@
 	domain-supply = <&mt6359_vsram_others_ldo_reg>;
 };
 
+&mipi_tx0 {
+	status = "okay";
+};
+
 &mmc0 {
 	status = "okay";
 	pinctrl-names = "default", "state_uhs";
@@ -500,6 +577,10 @@
 	mediatek,mic-type-2 = <1>; /* ACC */
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pcie0 {
 	pinctrl-names = "default", "idle";
 	pinctrl-0 = <&pcie0_default_pins>;
@@ -777,6 +858,25 @@
 		};
 	};
 
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			output-high;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
+			output-low;
+		};
+	};
+
 	pcie0_default_pins: pcie0-default-pins {
 		pins {
 			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
@@ -803,8 +903,8 @@
 		};
 	};
 
-	pwm0_default_pins: pwm0-default-pins {
-		pins-cmd-dat {
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm {
 			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
 		};
 	};
@@ -872,6 +972,7 @@
 
 &scp {
 	memory-region = <&scp_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
 	status = "okay";
 };
 
@@ -1014,6 +1115,18 @@
 	status = "okay";
 };
 
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 1c922e98441a..ef8d5bcc17e1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -139,9 +139,21 @@
 			no-map;
 		};
 
-		afe_mem: memory@60000000 {
+		adsp_mem: memory@60000000 {
 			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0x1100000>;
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
 			no-map;
 		};
 
@@ -152,6 +164,16 @@
 	};
 };
 
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&mt6359_vcore_buck_reg>;
 };
@@ -514,6 +536,18 @@
 &pio {
 	mediatek,rsel-resistance-in-si-unit;
 
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
 	dsi0_backlight_pins: dsi0-backlight-pins {
 		pins-backlight-en {
 			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
@@ -850,9 +884,30 @@
 
 &scp {
 	memory-region = <&scp_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
 	status = "okay";
 };
 
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
 &spi1 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&spi1_pins>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 32bb76b3202a..83bf5c81b5f7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -12,10 +12,12 @@
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &uart0 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index ecd171b2feba..fead4dde590d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -176,4 +176,69 @@
 			};
 		};
 	};
+
+	pinctrl: pinctrl@f0010000 {
+		compatible = "nuvoton,npcm845-pinctrl";
+		ranges = <0x0 0x0 0xf0010000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nuvoton,sysgcr = <&gcr>;
+		status = "okay";
+		gpio0: gpio@f0010000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x0 0xB0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+		gpio1: gpio@f0011000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x1000 0xB0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+		};
+		gpio2: gpio@f0012000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x2000 0xB0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+		};
+		gpio3: gpio@f0013000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x3000 0xB0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+		};
+		gpio4: gpio@f0014000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x4000 0xB0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+		};
+		gpio5: gpio@f0015000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x5000 0xB0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 160 32>;
+		};
+		gpio6: gpio@f0016000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x6000 0xB0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+		};
+		gpio7: gpio@f0017000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0xB0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 224 32>;
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 15aa49fc4503..8b3736cee323 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2394,6 +2394,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
@@ -2409,6 +2415,10 @@
 		};
 	};
 
+	pwm@c340000 {
+		status = "okay";
+	};
+
 	pcie@10003000 {
 		status = "okay";
 
@@ -2508,6 +2518,16 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+		fan-supply = <&vdd_fan>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_CARD_SW_PWR";
@@ -2556,6 +2576,17 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
 	sound {
 		compatible = "nvidia,tegra186-audio-graph-card";
 		status = "okay";
@@ -2621,4 +2652,88 @@
 
 		label = "NVIDIA Jetson TX2 APE";
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index e2d6857a3709..970ce5a03540 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -61,6 +61,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -191,6 +193,10 @@
 		nvidia,invert-interrupt;
 	};
 
+	gpu@17000000 {
+		status = "okay";
+	};
+
 	bpmp {
 		i2c {
 			status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 26f71651933d..5f3f572ecea9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -549,6 +549,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -712,6 +714,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hsp@3c00000 {
 		status = "okay";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2b3bb5d0af17..5778c93af3e6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -124,28 +124,28 @@
 			 <&bpmp TEGRA186_CLK_APB2APE>;
 		clock-names = "ape", "apb2ape";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
 		status = "disabled";
 
 		tegra_ahub: ahub@2900800 {
 			compatible = "nvidia,tegra186-ahub";
-			reg = <0x02900800 0x800>;
+			reg = <0x0 0x02900800 0x0 0x800>;
 			clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			clock-names = "ahub";
 			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
 			assigned-clock-rates = <81600000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x02900800 0x02900800 0x11800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
 			status = "disabled";
 
 			tegra_i2s1: i2s@2901000 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901000 0x100>;
+				reg = <0x0 0x2901000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S1>,
 					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -159,7 +159,7 @@
 			tegra_i2s2: i2s@2901100 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901100 0x100>;
+				reg = <0x0 0x2901100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S2>,
 					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -173,7 +173,7 @@
 			tegra_i2s3: i2s@2901200 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901200 0x100>;
+				reg = <0x0 0x2901200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S3>,
 					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -187,7 +187,7 @@
 			tegra_i2s4: i2s@2901300 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901300 0x100>;
+				reg = <0x0 0x2901300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S4>,
 					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -201,7 +201,7 @@
 			tegra_i2s5: i2s@2901400 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901400 0x100>;
+				reg = <0x0 0x2901400 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S5>,
 					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -215,7 +215,7 @@
 			tegra_i2s6: i2s@2901500 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901500 0x100>;
+				reg = <0x0 0x2901500 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S6>,
 					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -229,7 +229,7 @@
 			tegra_sfc1: sfc@2902000 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902000 0x200>;
+				reg = <0x0 0x2902000 0x0 0x200>;
 				sound-name-prefix = "SFC1";
 				status = "disabled";
 			};
@@ -237,7 +237,7 @@
 			tegra_sfc2: sfc@2902200 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902200 0x200>;
+				reg = <0x0 0x2902200 0x0 0x200>;
 				sound-name-prefix = "SFC2";
 				status = "disabled";
 			};
@@ -245,7 +245,7 @@
 			tegra_sfc3: sfc@2902400 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902400 0x200>;
+				reg = <0x0 0x2902400 0x0 0x200>;
 				sound-name-prefix = "SFC3";
 				status = "disabled";
 			};
@@ -253,7 +253,7 @@
 			tegra_sfc4: sfc@2902600 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902600 0x200>;
+				reg = <0x0 0x2902600 0x0 0x200>;
 				sound-name-prefix = "SFC4";
 				status = "disabled";
 			};
@@ -261,7 +261,7 @@
 			tegra_amx1: amx@2903000 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903000 0x100>;
+				reg = <0x0 0x2903000 0x0 0x100>;
 				sound-name-prefix = "AMX1";
 				status = "disabled";
 			};
@@ -269,7 +269,7 @@
 			tegra_amx2: amx@2903100 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903100 0x100>;
+				reg = <0x0 0x2903100 0x0 0x100>;
 				sound-name-prefix = "AMX2";
 				status = "disabled";
 			};
@@ -277,7 +277,7 @@
 			tegra_amx3: amx@2903200 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903200 0x100>;
+				reg = <0x0 0x2903200 0x0 0x100>;
 				sound-name-prefix = "AMX3";
 				status = "disabled";
 			};
@@ -285,7 +285,7 @@
 			tegra_amx4: amx@2903300 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903300 0x100>;
+				reg = <0x0 0x2903300 0x0 0x100>;
 				sound-name-prefix = "AMX4";
 				status = "disabled";
 			};
@@ -293,7 +293,7 @@
 			tegra_adx1: adx@2903800 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903800 0x100>;
+				reg = <0x0 0x2903800 0x0 0x100>;
 				sound-name-prefix = "ADX1";
 				status = "disabled";
 			};
@@ -301,7 +301,7 @@
 			tegra_adx2: adx@2903900 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903900 0x100>;
+				reg = <0x0 0x2903900 0x0 0x100>;
 				sound-name-prefix = "ADX2";
 				status = "disabled";
 			};
@@ -309,7 +309,7 @@
 			tegra_adx3: adx@2903a00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903a00 0x100>;
+				reg = <0x0 0x2903a00 0x0 0x100>;
 				sound-name-prefix = "ADX3";
 				status = "disabled";
 			};
@@ -317,14 +317,14 @@
 			tegra_adx4: adx@2903b00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903b00 0x100>;
+				reg = <0x0 0x2903b00 0x0 0x100>;
 				sound-name-prefix = "ADX4";
 				status = "disabled";
 			};
 
 			tegra_dmic1: dmic@2904000 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904000 0x100>;
+				reg = <0x0 0x2904000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
@@ -336,7 +336,7 @@
 
 			tegra_dmic2: dmic@2904100 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904100 0x100>;
+				reg = <0x0 0x2904100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
@@ -348,7 +348,7 @@
 
 			tegra_dmic3: dmic@2904200 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904200 0x100>;
+				reg = <0x0 0x2904200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
@@ -360,7 +360,7 @@
 
 			tegra_dmic4: dmic@2904300 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904300 0x100>;
+				reg = <0x0 0x2904300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
@@ -372,7 +372,7 @@
 
 			tegra_dspk1: dspk@2905000 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905000 0x100>;
+				reg = <0x0 0x2905000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
@@ -384,7 +384,7 @@
 
 			tegra_dspk2: dspk@2905100 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905100 0x100>;
+				reg = <0x0 0x2905100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
@@ -397,9 +397,9 @@
 			tegra_ope1: processing-engine@2908000 {
 				compatible = "nvidia,tegra186-ope",
 					     "nvidia,tegra210-ope";
-				reg = <0x2908000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				reg = <0x0 0x2908000 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
 				ranges;
 				sound-name-prefix = "OPE1";
 				status = "disabled";
@@ -407,20 +407,20 @@
 				equalizer@2908100 {
 					compatible = "nvidia,tegra186-peq",
 						     "nvidia,tegra210-peq";
-					reg = <0x2908100 0x100>;
+					reg = <0x0 0x2908100 0x0 0x100>;
 				};
 
 				dynamic-range-compressor@2908200 {
 					compatible = "nvidia,tegra186-mbdrc",
 						     "nvidia,tegra210-mbdrc";
-					reg = <0x2908200 0x200>;
+					reg = <0x0 0x2908200 0x0 0x200>;
 				};
 			};
 
 			tegra_mvc1: mvc@290a000 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a000 0x200>;
+				reg = <0x0 0x290a000 0x0 0x200>;
 				sound-name-prefix = "MVC1";
 				status = "disabled";
 			};
@@ -428,7 +428,7 @@
 			tegra_mvc2: mvc@290a200 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a200 0x200>;
+				reg = <0x0 0x290a200 0x0 0x200>;
 				sound-name-prefix = "MVC2";
 				status = "disabled";
 			};
@@ -436,14 +436,14 @@
 			tegra_amixer: amixer@290bb00 {
 				compatible = "nvidia,tegra186-amixer",
 					     "nvidia,tegra210-amixer";
-				reg = <0x290bb00 0x800>;
+				reg = <0x0 0x290bb00 0x0 0x800>;
 				sound-name-prefix = "MIXER1";
 				status = "disabled";
 			};
 
 			tegra_admaif: admaif@290f000 {
 				compatible = "nvidia,tegra186-admaif";
-				reg = <0x0290f000 0x1000>;
+				reg = <0x0 0x0290f000 0x0 0x1000>;
 				dmas = <&adma 1>, <&adma 1>,
 				       <&adma 2>, <&adma 2>,
 				       <&adma 3>, <&adma 3>,
@@ -489,7 +489,7 @@
 
 			tegra_asrc: asrc@2910000 {
 				compatible = "nvidia,tegra186-asrc";
-				reg = <0x2910000 0x2000>;
+				reg = <0x0 0x2910000 0x0 0x2000>;
 				sound-name-prefix = "ASRC1";
 				status = "disabled";
 			};
@@ -497,7 +497,7 @@
 
 		adma: dma-controller@2930000 {
 			compatible = "nvidia,tegra186-adma";
-			reg = <0x02930000 0x20000>;
+			reg = <0x0 0x02930000 0x0 0x20000>;
 			interrupt-parent = <&agic>;
 			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -542,8 +542,8 @@
 				     "nvidia,tegra210-agic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
-			reg = <0x02a41000 0x1000>,
-			      <0x02a42000 0x2000>;
+			reg = <0x0 0x02a41000 0x0 0x1000>,
+			      <0x0 0x02a42000 0x0 0x2000>;
 			interrupts = <GIC_SPI 145
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&bpmp TEGRA186_CLK_APE>;
@@ -612,6 +612,8 @@
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTA>;
 		resets = <&bpmp TEGRA186_RESET_UARTA>;
+		dmas = <&gpcdma 8>, <&gpcdma 8>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -621,9 +623,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
+		dmas = <&gpcdma 9>, <&gpcdma 9>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -633,9 +635,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
+		dmas = <&gpcdma 19>, <&gpcdma 19>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -645,9 +647,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
+		dmas = <&gpcdma 20>, <&gpcdma 20>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -657,9 +659,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
+		dmas = <&gpcdma 12>, <&gpcdma 12>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1183,7 +1185,7 @@
 	};
 
 	cec@3960000 {
-		compatible = "nvidia,tegra186-cec";
+		compatible = "nvidia,tegra186-cec", "nvidia,tegra210-cec";
 		reg = <0x0 0x03960000 0x0 0x10000>;
 		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_CEC>;
@@ -1236,9 +1238,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
+		dmas = <&gpcdma 3>, <&gpcdma 3>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1248,9 +1250,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
+		dmas = <&gpcdma 2>, <&gpcdma 2>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1511,10 +1513,10 @@
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
 		reset-names = "host1x";
 
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+		ranges = <0x0 0x15000000 0x0 0x15000000 0x0 0x01000000>;
 
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
 		interconnect-names = "dma-mem";
@@ -1533,7 +1535,7 @@
 
 		dpaux1: dpaux@15040000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x15040000 0x10000>;
+			reg = <0x0 0x15040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1567,7 +1569,7 @@
 
 		display-hub@15200000 {
 			compatible = "nvidia,tegra186-display";
-			reg = <0x15200000 0x00040000>;
+			reg = <0x0 0x15200000 0x0 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
@@ -1585,14 +1587,14 @@
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 
-			ranges = <0x15200000 0x15200000 0x40000>;
+			ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
 
 			display@15200000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15200000 0x10000>;
+				reg = <0x0 0x15200000 0x0 0x10000>;
 				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
 				clock-names = "dc";
@@ -1611,7 +1613,7 @@
 
 			display@15210000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15210000 0x10000>;
+				reg = <0x0 0x15210000 0x0 0x10000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
 				clock-names = "dc";
@@ -1630,7 +1632,7 @@
 
 			display@15220000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15220000 0x10000>;
+				reg = <0x0 0x15220000 0x0 0x10000>;
 				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
 				clock-names = "dc";
@@ -1650,7 +1652,7 @@
 
 		dsia: dsi@15300000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15300000 0x10000>;
+			reg = <0x0 0x15300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSI>,
 				 <&bpmp TEGRA186_CLK_DSIA_LP>,
@@ -1665,7 +1667,7 @@
 
 		vic@15340000 {
 			compatible = "nvidia,tegra186-vic";
-			reg = <0x15340000 0x40000>;
+			reg = <0x0 0x15340000 0x0 0x40000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_VIC>;
 			clock-names = "vic";
@@ -1681,7 +1683,7 @@
 
 		nvjpg@15380000 {
 			compatible = "nvidia,tegra186-nvjpg";
-			reg = <0x15380000 0x40000>;
+			reg = <0x0 0x15380000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
 			clock-names = "nvjpg";
 			resets = <&bpmp TEGRA186_RESET_NVJPG>;
@@ -1696,7 +1698,7 @@
 
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15400000 0x10000>;
+			reg = <0x0 0x15400000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIB>,
 				 <&bpmp TEGRA186_CLK_DSIB_LP>,
@@ -1711,7 +1713,7 @@
 
 		nvdec@15480000 {
 			compatible = "nvidia,tegra186-nvdec";
-			reg = <0x15480000 0x40000>;
+			reg = <0x0 0x15480000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
 			clock-names = "nvdec";
 			resets = <&bpmp TEGRA186_RESET_NVDEC>;
@@ -1727,7 +1729,7 @@
 
 		nvenc@154c0000 {
 			compatible = "nvidia,tegra186-nvenc";
-			reg = <0x154c0000 0x40000>;
+			reg = <0x0 0x154c0000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVENC>;
 			clock-names = "nvenc";
 			resets = <&bpmp TEGRA186_RESET_NVENC>;
@@ -1742,7 +1744,7 @@
 
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15540000 0x10000>;
+			reg = <0x0 0x15540000 0x0 0x10000>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR0>,
 				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
@@ -1766,7 +1768,7 @@
 
 		sor1: sor@15580000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15580000 0x10000>;
+			reg = <0x0 0x15580000 0x0 0x10000>;
 			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR1>,
 				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
@@ -1790,7 +1792,7 @@
 
 		dpaux: dpaux@155c0000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x155c0000 0x10000>;
+			reg = <0x0 0x155c0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1824,7 +1826,7 @@
 
 		padctl@15880000 {
 			compatible = "nvidia,tegra186-dsi-padctl";
-			reg = <0x15880000 0x10000>;
+			reg = <0x0 0x15880000 0x0 0x10000>;
 			resets = <&bpmp TEGRA186_RESET_DSI>;
 			reset-names = "dsi";
 			status = "disabled";
@@ -1832,7 +1834,7 @@
 
 		dsic: dsi@15900000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15900000 0x10000>;
+			reg = <0x0 0x15900000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIC>,
 				 <&bpmp TEGRA186_CLK_DSIC_LP>,
@@ -1847,7 +1849,7 @@
 
 		dsid: dsi@15940000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15940000 0x10000>;
+			reg = <0x0 0x15940000 0x0 0x10000>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSID>,
 				 <&bpmp TEGRA186_CLK_DSID_LP>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index e8b296d9e0d3..43942db6eac9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -104,6 +104,8 @@
 		};
 
 		serial@3110000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index c32876699a43..ea6f397a2792 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2121,6 +2121,12 @@
 			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor2>;
+		};
+
 		i2c@c240000 {
 			typec@8 {
 				compatible = "cypress,cypd4226";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 4a17ea5e40fd..16cf4414de59 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -2174,6 +2174,12 @@
 			phy-names = "usb2-1", "usb2-2", "usb3-2";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor1>;
+		};
+
 		host1x@13e00000 {
 			display-hub@15200000 {
 				status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
index 59860d19f0f6..a410fc335fa3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -78,6 +78,8 @@
 		};
 
 		serial@3100000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 33f92b77cd9d..1399342f23e1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -747,6 +747,8 @@
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTA>;
 			resets = <&bpmp TEGRA194_RESET_UARTA>;
+			dmas = <&gpcdma 8>, <&gpcdma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -757,6 +759,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTB>;
 			resets = <&bpmp TEGRA194_RESET_UARTB>;
+			dmas = <&gpcdma 9>, <&gpcdma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -766,9 +770,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTD>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTD>;
-			reset-names = "serial";
+			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -778,9 +782,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTE>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTE>;
-			reset-names = "serial";
+			dmas = <&gpcdma 20>, <&gpcdma 20>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -790,9 +794,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTF>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTF>;
-			reset-names = "serial";
+			dmas = <&gpcdma 12>, <&gpcdma 12>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -817,9 +821,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTH>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTH>;
-			reset-names = "serial";
+			dmas = <&gpcdma 13>, <&gpcdma 13>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1339,7 +1343,7 @@
 		};
 
 		cec@3960000 {
-			compatible = "nvidia,tegra194-cec";
+			compatible = "nvidia,tegra194-cec", "nvidia,tegra210-cec";
 			reg = <0x0 0x03960000 0x0 0x10000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_CEC>;
@@ -1616,9 +1620,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTC>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTC>;
-			reset-names = "serial";
+			dmas = <&gpcdma 3>, <&gpcdma 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1628,9 +1632,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTG>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTG>;
-			reset-names = "serial";
+			dmas = <&gpcdma 2>, <&gpcdma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 9b9d1d15b0c7..e07aeeee3586 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -11,6 +11,7 @@
 		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
+		serial3 = &uartd;
 	};
 
 	chosen {
@@ -24,6 +25,7 @@
 
 	gpu@57000000 {
 		vdd-supply = <&vdd_gpu>;
+		status = "okay";
 	};
 
 	/* debug port */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a6a58e51822d..627abf51a5a4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -90,6 +90,12 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	clock@70110000 {
 		status = "okay";
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 83ed6ac2a8d8..584461f3a619 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1623,6 +1623,18 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+		fan-supply = <&vdd_fan>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(K, 7) IRQ_TYPE_EDGE_RISING>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sys_mux: regulator-vdd-sys-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SYS_MUX";
@@ -1778,4 +1790,67 @@
 		enable-active-high;
 		vin-supply = <&vdd_5v0_sys>;
 	};
+
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_5v0_sys>;
+
+		regulator-enable-ramp-delay = <284>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index bbd6ff0564da..b84a8e39b404 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1365,7 +1365,7 @@
 				};
 			};
 
-			hog-0 {
+			max77620-hog {
 				gpio-hog;
 				output-high;
 				gpios = <2 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 0ecdd7243b2e..ec0e84cb83ef 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -419,6 +419,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hda@70030000 {
 		nvidia,model = "NVIDIA Jetson Nano HDA";
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index b6c84d195c0e..402b0ede1472 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -959,6 +959,15 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra210-cec";
+		reg = <0x0 0x070015000 0x0 0x1000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra210-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 2601b43b2d8c..df034dbb8285 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -16,6 +16,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &gen1_i2c;
+		i2c1 = &gen2_i2c;
+		i2c2 = &cam_i2c;
+		i2c3 = &dp_aux_ch1_i2c;
+		i2c4 = &bpmp_i2c;
+		i2c5 = &dp_aux_ch0_i2c;
+		i2c6 = &dp_aux_ch2_i2c;
+		i2c7 = &gen8_i2c;
+		i2c8 = &dp_aux_ch3_i2c;
+	};
+
 	bus@0 {
 		compatible = "simple-bus";
 
@@ -2948,6 +2960,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI0>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI0_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
@@ -3031,6 +3048,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI1>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI1>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI1_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/Makefile
index 140b0b2abfb5..669b888b27a1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/Makefile
@@ -116,6 +116,12 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+
+qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
+qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-industrial-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
@@ -134,7 +140,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
+sc7180-acer-aspire1-el2-dtbs	:= sc7180-acer-aspire1.dtb sc7180-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
@@ -200,11 +207,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb
+sc8280xp-crd-el2-dtbs	:= sc8280xp-crd.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb sc8280xp-crd-el2.dtb
+sc8280xp-huawei-gaokun3-el2-dtbs	:= sc8280xp-huawei-gaokun3.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb sc8280xp-huawei-gaokun3-el2.dtb
+sc8280xp-lenovo-thinkpad-x13s-el2-dtbs	:= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-lenovo-thinkpad-x13s-el2.dtb
+sc8280xp-microsoft-arcata-el2-dtbs	:= sc8280xp-microsoft-arcata.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb sc8280xp-microsoft-arcata-el2.dtb
+sc8280xp-microsoft-blackrock-el2-dtbs	:= sc8280xp-microsoft-blackrock.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb sc8280xp-microsoft-blackrock-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
@@ -246,6 +258,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
@@ -288,13 +301,29 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-qrd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-omnibook-x14.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
+x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb x1e78100-lenovo-thinkpad-t14s-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb
+x1e80100-asus-vivobook-s15-el2-dtbs	:= x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb
+x1e80100-crd-el2-dtbs	:= x1e80100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb x1e80100-crd-el2.dtb
+x1e80100-dell-xps13-9345-el2-dtbs	:= x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb
+x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-elitebook-ultra-g1q.dtb x1e80100-hp-elitebook-ultra-g1q-el2.dtb
+x1e80100-hp-omnibook-x14-el2-dtbs	:= x1e80100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-omnibook-x14.dtb x1e80100-hp-omnibook-x14-el2.dtb
+x1e80100-lenovo-yoga-slim7x-el2-dtbs	:= x1e80100-lenovo-yoga-slim7x.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb x1e80100-lenovo-yoga-slim7x-el2.dtb
+x1e80100-microsoft-romulus13-el2-dtbs	:= x1e80100-microsoft-romulus13.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb x1e80100-microsoft-romulus13-el2.dtb
+x1e80100-microsoft-romulus15-el2-dtbs	:= x1e80100-microsoft-romulus15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
+x1e80100-qcp-el2-dtbs	:= x1e80100-qcp.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 18d5dcb1297c..5d0eab1c940d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -222,11 +222,17 @@
 &blsp_uart1 {
 	status = "okay";
 	label = "LS-UART0";
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &blsp_uart2 {
 	status = "okay";
 	label = "LS-UART1";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &camss {
@@ -591,6 +597,21 @@
 		"USR_LED_2_CTRL", /* GPIO 120 */
 		"SB_HS_ID";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
index c41afb510ea8..af0f6e717268 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
@@ -190,11 +190,17 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 	label = "UART0";
 	status = "okay";
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_default>;
+	pinctrl-1 = <&blsp_uart2_sleep>;
+	pinctrl-names = "default", "sleep";
 	label = "UART1";
 	status = "okay";
 };
@@ -367,6 +373,37 @@
 		bias-disable;
 	};
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+		bootph-all;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	blsp_uart2_default: blsp-uart2-default-state {
+		/* TX, RX */
+		pins = "gpio4", "gpio5";
+		function = "blsp_uart2";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart2_sleep: blsp-uart2-sleep-state {
+		pins = "gpio4", "gpio5";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	msm_key_volp_n_default: msm-key-volp-n-default-state {
 		pins = "gpio107";
 		function = "gpio";
@@ -463,10 +500,6 @@
 	drive-strength = <16>;
 };
 
-&blsp_uart1_default {
-	bootph-all;
-};
-
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8039-t2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 4f82bb668616..38c281f0fe65 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -116,18 +116,16 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
@@ -323,6 +321,20 @@
 		"USBC_GPIO7_1V8",	/* GPIO_120 */
 		"NC";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		pins = "gpio0", "gpio1";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pinctrl_backlight: backlight-state {
 		pins = "gpio98";
 		function = "gpio";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index fa5d5ede4f81..115676c2e832 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -953,15 +953,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -1012,10 +1012,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 8460b538eb6a..43def95e9275 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -9,6 +9,8 @@
 
 #include "ipq5018.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
 	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
@@ -28,6 +30,20 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
@@ -43,6 +59,30 @@
 };
 
 &tlmm {
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio14";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio16";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio9";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 8914f2ef0bc4..130360014c5e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -79,6 +79,7 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
 			qcom,sdi-enabled;
 		};
 	};
@@ -147,6 +148,40 @@
 			status = "disabled";
 		};
 
+		pcie1_phy: phy@7e000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x0007e000 0x800>;
+
+			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@86000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x00086000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -170,8 +205,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board_clk>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
 				 <0>,
 				 <0>,
@@ -187,6 +222,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5018", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -387,6 +427,208 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@80000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0x80000000 0xf1d>,
+			      <0x80000f20 0xa8>,
+			      <0x80001000 0x1000>,
+			      <0x00078000 0x3000>,
+			      <0x80100000 0x1000>,
+			      <0x0007b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie1_phy>;
+			phy-names ="pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
+				 <0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+				 <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_SLEEP_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@a0000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0xa0000000 0xf1d>,
+			      <0xa0000f20 0xa8>,
+			      <0xa0001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0xa0100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie0_phy>;
+			phy-names ="pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
+				 <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index 846413817e9a..79ec77cfe552 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -32,6 +32,34 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
 &tlmm {
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
@@ -40,6 +68,54 @@
 		bias-pull-up;
 	};
 
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio37";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio39";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio46";
+			function = "pcie1_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio47";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio48";
+			function = "pcie1_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio13";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index ca3da95730bd..bd28c490415f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -177,6 +177,46 @@
 				reg = <0x1d 0x2>;
 				bits = <7 2>;
 			};
+
+			tsens_sens11_off: s11@3a5 {
+				reg = <0x3a5 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3ad {
+				reg = <0x3ad 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3ae {
+				reg = <0x3ae 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@3e1 {
+				reg = <0x3e1 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@3e1 {
+				reg = <0x3e1 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@3e2 {
+				reg = <0x3e2 0x2>;
+				bits = <5 10>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -186,6 +226,72 @@
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5332-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcie0_phy: phy@4b0000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b0000 0x800>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@4b1000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b1000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X2_PHY_BCR>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5332-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -212,8 +318,8 @@
 			#interconnect-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
+				 <&pcie1_phy>,
+				 <&pcie0_phy>,
 				 <0>;
 		};
 
@@ -479,6 +585,283 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@18000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x18000000 0xf1c>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x00088000 0x3000>,
+			      <0x18100000 0x1000>,
+			      <0x0008b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x07d00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X2_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X2_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X2_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X2_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>,
+					<&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@20000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x20000000 0xf1c>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0x20100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x20300000 0x20300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X1_0_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>,
+					<&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		rfa-0-thermal {
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index b6e4bb3328b3..1f89530cb035 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -7,6 +7,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5424.dtsi"
 
 / {
@@ -17,6 +19,33 @@
 		serial0 = &uart1;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
 	vreg_misc_3p3: regulator-usb-3p3 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -53,6 +82,32 @@
 	dr_mode = "host";
 };
 
+&pcie2 {
+	pinctrl-0 = <&pcie2_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
 &qusb_phy_0 {
 	vdd-supply = <&vreg_misc_0p925>;
 	vdda-pll-supply = <&vreg_misc_1p8>;
@@ -69,6 +124,13 @@
 	status = "okay";
 };
 
+&sdhc {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &sleep_clk {
 	clock-frequency = <32000>;
 };
@@ -95,6 +157,20 @@
 };
 
 &tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
 	spi0_default_state: spi0-default-state {
 		clk-pins {
 			pins = "gpio6";
@@ -147,6 +223,20 @@
 			bias-pull-up;
 		};
 	};
+
+	pcie2_default_state: pcie2-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
 };
 
 &uart1 {
@@ -166,4 +256,3 @@
 &xo_board {
 	clock-frequency = <24000000>;
 };
-
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5424.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 7034d378b1ef..66bd2261eb25 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
 #include <dt-bindings/reset/qcom,ipq5424-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5424.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -132,6 +133,11 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@8a200000 {
+			reg = <0x0 0x8a200000 0x0 0x400000>;
+			no-map;
+		};
+
 		tz@8a600000 {
 			reg = <0x0 0x8a600000 0x0 0x200000>;
 			no-map;
@@ -152,6 +158,197 @@
 		#size-cells = <2>;
 		ranges = <0 0 0 0 0x10 0>;
 
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@8c000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x0008c000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		efuse@a4000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0 0x000a4000 0 0x741>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_sens9_off: s9@3dc {
+				reg = <0x3dc 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens10_off: s10@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens11_off: s11@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3de {
+				reg = <0x3de 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3de {
+				reg = <0x3de 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3e5 {
+				reg = <0x3e5 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3e6 {
+				reg = <0x3e6 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@419 {
+				reg = <0x419 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@419 {
+				reg = <0x419 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@41a {
+				reg = <0x41a 0x2>;
+				bits = <5 10>;
+			};
+		};
+
+		pcie2_phy: phy@f4000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000f4000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@fc000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000fc000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5424-tsens";
+			reg = <0 0x004a9000 0 0x1000>,
+			      <0 0x004a8000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens9_off>,
+				      <&tsens_sens10_off>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens9_off",
+					   "tsens_sens10_off",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <7>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		rng: rng@4c3000 {
 			compatible = "qcom,ipq5424-trng", "qcom,trng";
 			reg = <0 0x004c3000 0 0x1000>;
@@ -189,10 +386,10 @@
 			reg = <0 0x01800000 0 0x40000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie2_phy>,
+				 <&pcie3_phy>,
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -265,6 +462,8 @@
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
 
+			supports-cqe;
+
 			status = "disabled";
 		};
 
@@ -506,6 +705,532 @@
 			};
 		};
 
+		pcie3: pcie@40000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x40000000 0x0 0xf1c>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x000f8000 0x0 0x3000>,
+			      <0x0 0x40100000 0x0 0x1000>,
+			      <0x0 0x000fe000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie2: pcie@50000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x50000000 0x0 0xf1c>,
+			      <0x0 0x50000f20 0x0 0xa8>,
+			      <0x0 0x50001000 0x0 0x1000>,
+			      <0x0 0x000f0000 0x0 0x3000>,
+			      <0x0 0x50100000 0x0 0x1000>,
+			      <0x0 0x000f6000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1: pcie@60000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x60000000 0x0 0xf1c>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x1000>,
+			      <0x0 0x00088000 0x0 0x3000>,
+			      <0x0 0x60100000 0x0 0x1000>,
+			      <0x0 0x0008e000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1	&gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_CNOC_PCIE1	&gcc SLAVE_CNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@70000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x70000000 0x0 0xf1c>,
+			      <0x0 0x70000f20 0x0 0xa8>,
+			      <0x0 0x70001000 0x0 0x1000>,
+			      <0x0 0x00080000 0x0 0x3000>,
+			      <0x0 0x70100000 0x0 0x1000>,
+			      <0x0 0x00086000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_CNOC_PCIE0	&gcc SLAVE_CNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wcss-tile2-thermal {
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				wcss-tile2-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-tile3-thermal {
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				wcss-tile3-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index f5f4827c0e17..9c69d3027b43 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-#include "ipq6018.dtsi"
+#include "ipq6018-mp5496.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
new file mode 100644
index 000000000000..d6b111a77f79
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * ipq6018-mp5496.dtsi describes common properties (e.g. regulators) that
+ * apply to most devices that make use of the IPQ6018 SoC and MP5496 PMIC.
+ */
+
+#include "ipq6018.dtsi"
+
+&cpu0 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu1 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu2 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu3 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		mp5496_s2: s2 {
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1062500>;
+			regulator-always-on;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdhc {
+	vqmmc-supply = <&mp5496_l2>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index dbf6716bcb59..7f0faf26b707 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -43,7 +43,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -56,7 +55,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +67,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -82,7 +79,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -119,6 +115,13 @@
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
@@ -133,6 +136,13 @@
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <937500>;
+			opp-supported-hw = <0x2>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
@@ -170,16 +180,6 @@
 			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-ipq6018", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
-
-				regulators {
-					compatible = "qcom,rpm-mp5496-regulators";
-
-					ipq6018_s2: s2 {
-						regulator-min-microvolt = <725000>;
-						regulator-max-microvolt = <1062500>;
-						regulator-always-on;
-					};
-				};
 			};
 		};
 	};
@@ -210,8 +210,11 @@
 		};
 
 		smem_region: memory@4aa00000 {
+			compatible = "qcom,smem";
 			reg = <0x0 0x4aa00000 0x0 0x100000>;
 			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		q6_region: memory@4ab00000 {
@@ -220,12 +223,6 @@
 		};
 	};
 
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index ae12f069f26f..bdb396afb992 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -111,6 +111,13 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		mp5496_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 	};
 };
 
@@ -139,6 +146,50 @@
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
 };
 
 &usb_0_dwc3 {
@@ -146,7 +197,7 @@
 };
 
 &usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-supply = <&regulator_fixed_0p925>;
 
 	status = "okay";
@@ -154,7 +205,7 @@
 
 &usb_0_qusbphy {
 	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
 
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 165ebbb59511..fa7bb521e786 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -55,18 +55,6 @@
 	status = "okay";
 };
 
-&sdhc_1 {
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	max-frequency = <384000000>;
-	bus-width = <8>;
-	status = "okay";
-};
-
 &tlmm {
 
 	pcie1_default: pcie1-default-state {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 942290028972..815b5f9540b8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -378,6 +378,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
@@ -673,6 +675,33 @@
 			status = "disabled";
 		};
 
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core", "aon", "iom";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		usb_0_qusbphy: phy@7b000 {
 			compatible = "qcom,ipq9574-qusb2-phy";
 			reg = <0x0007b000 0x180>;
@@ -876,12 +905,18 @@
 
 		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq9574";
-			reg =  <0x10000000 0xf1d>,
-			       <0x10000f20 0xa8>,
-			       <0x10001000 0x1000>,
-			       <0x000f8000 0x4000>,
-			       <0x10100000 0x1000>;
-			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x10001000 0x1000>,
+			      <0x000f8000 0x4000>,
+			      <0x10100000 0x1000>,
+			      <0x000fe000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
 			device_type = "pci";
 			linux,pci-domain = <1>;
 			bus-range = <0x00 0xff>;
@@ -956,12 +991,18 @@
 
 		pcie3: pcie@18000000 {
 			compatible = "qcom,pcie-ipq9574";
-			reg =  <0x18000000 0xf1d>,
-			       <0x18000f20 0xa8>,
-			       <0x18001000 0x1000>,
-			       <0x000f0000 0x4000>,
-			       <0x18100000 0x1000>;
-			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			reg = <0x18000000 0xf1d>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x000f0000 0x4000>,
+			      <0x18100000 0x1000>,
+			      <0x000f6000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
 			device_type = "pci";
 			linux,pci-domain = <3>;
 			bus-range = <0x00 0xff>;
@@ -972,14 +1013,14 @@
 			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
 
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1036,12 +1077,18 @@
 
 		pcie2: pcie@20000000 {
 			compatible = "qcom,pcie-ipq9574";
-			reg =  <0x20000000 0xf1d>,
-			       <0x20000f20 0xa8>,
-			       <0x20001000 0x1000>,
-			       <0x00088000 0x4000>,
-			       <0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00088000 0x4000>,
+			      <0x20100000 0x1000>,
+			      <0x0008e000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
 			device_type = "pci";
 			linux,pci-domain = <2>;
 			bus-range = <0x00 0xff>;
@@ -1116,12 +1163,18 @@
 
 		pcie0: pci@28000000 {
 			compatible = "qcom,pcie-ipq9574";
-			reg =  <0x28000000 0xf1d>,
-			       <0x28000f20 0xa8>,
-			       <0x28001000 0x1000>,
-			       <0x00080000 0x4000>,
-			       <0x28100000 0x1000>;
-			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			reg = <0x28000000 0xf1d>,
+			      <0x28000f20 0xa8>,
+			      <0x28001000 0x1000>,
+			      <0x00080000 0x4000>,
+			      <0x28100000 0x1000>,
+			      <0x00086000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
@@ -1193,6 +1246,35 @@
 			status = "disabled";
 		};
 
+		nsscc: clock-controller@39b00000 {
+			compatible = "qcom,ipq9574-nsscc";
+			reg = <0x39b00000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&cmn_pll NSS_1200MHZ_CLK>,
+				 <&cmn_pll PPE_353MHZ_CLK>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_NSSCC_CLK>;
+			clock-names = "xo",
+				      "nss_1200",
+				      "ppe_353",
+				      "gpll0_out",
+				      "uniphy0_rx",
+				      "uniphy0_tx",
+				      "uniphy1_rx",
+				      "uniphy1_tx",
+				      "uniphy2_rx",
+				      "uniphy2_tx",
+				      "bus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
 	};
 
 	thermal-zones {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index b4ce14a79370..3a6eba904641 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -133,6 +133,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 3459145516a1..2de8b6f9531b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -214,6 +214,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 77618c7374df..29d61f8d5dc9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -130,6 +130,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index f7be7e371820..742a325245c5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -131,6 +131,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index bf7fc89dd106..aa414b5d7ee4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -214,6 +214,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &lpass {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
index a823a1c40208..22bc73b94344 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
@@ -59,6 +59,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
index 07345e694f6f..c50374979939 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
@@ -112,6 +112,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 7f0c2c1b8a94..eb449112a226 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -254,6 +254,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &pm8916_bms {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 2cc54eaf7202..887764dc55b2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -178,6 +178,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
index 039961622633..75103168c1fc 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -58,19 +58,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 		direction = <Q6ASM_DAI_RX>;
 	};
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 		direction = <Q6ASM_DAI_TX>;
 	};
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 		direction = <Q6ASM_DAI_RX>;
 	};
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 		direction = <Q6ASM_DAI_RX>;
 		is-compress-dai;
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
index 6a27d0ecd2ad..4e202e7ed7db 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
@@ -69,6 +69,9 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_console_default>;
+	pinctrl-1 = <&blsp_uart1_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
@@ -129,14 +132,6 @@
 	status = "okay";
 };
 
-/* CTS/RTX are not used */
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &tlmm {
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
index c11a845e91bb..63d476523544 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -23,5 +23,8 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index e6355e5e2177..6f75707b6f9b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -302,6 +302,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &gpu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
index 7a7e99b015d9..fb790b02736a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -304,6 +304,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index fbd2caf405d5..ff9679d3f664 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -116,6 +116,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index 5ca2ada266f4..697f25d51d9d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -135,6 +135,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index caad1dead2e0..71b5c98458ff 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -319,6 +319,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &gpu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index c77ed04bb6c3..5719933fa8e0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -72,6 +72,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
index 1a7c347dc3f0..ebe85cd85ddf 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
@@ -93,6 +93,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 510b3b3c4e3c..68c8856d4c2e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -169,6 +169,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8f35c9af1878..de9fdc0dfc5f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
@@ -1231,29 +1232,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				/* TX, RX, CTS_N, RTS_N */
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1497,8 +1519,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1590,8 +1612,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -2158,9 +2180,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -2172,9 +2191,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
 			status = "disabled";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
index f1d22535fedd..9db503e21888 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -20,6 +20,14 @@
 	qcom,msm-id = <QCOM_ID_MSM8917 0>;
 	qcom,board-id = <0x1000b 2>, <0x2000b 2>;
 
+	pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8937_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+	};
+
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3000000>;
@@ -119,7 +127,7 @@
 		monitored-battery = <&battery>;
 	};
 
-	bq25601@6b{
+	bq25601@6b {
 		compatible = "ti,bq25601";
 		reg = <0x6b>;
 		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
@@ -131,6 +139,23 @@
 	};
 };
 
+&pm8937_gpios {
+	pwm_enable_default: pwm-enable-default-state {
+		pins = "gpio8";
+		function = "dtest2";
+		output-low;
+		bias-disable;
+		qcom,drive-strength = <2>;
+	};
+};
+
+&pm8937_pwm {
+	pinctrl-0 = <&pwm_enable_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &pm8937_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8917.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8917.dtsi
index 7bf58dd0146e..8a642fce2e40 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8917.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8917.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8917.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -587,7 +588,7 @@
 				bits = <1 6>;
 			};
 
-			tsens_s9_p1: s9-p1@230{
+			tsens_s9_p1: s9-p1@230 {
 				reg = <0x230 1>;
 				bits = <0 6>;
 			};
@@ -961,8 +962,8 @@
 			#power-domain-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "sleep_clk",
 				      "dsi0pll",
@@ -1051,8 +1052,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
index 3cec51891aed..18381a66daef 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -126,6 +126,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index b845da4fa23e..13422a19c26a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -243,6 +243,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index ceba6e73b211..07613080e79e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -373,6 +373,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
index 800e0747a2f7..a5187355f9fa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
@@ -126,6 +126,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 7cd5660de1b3..68b92fdb996c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2020-2023, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8939.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8939.h>
@@ -46,6 +47,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x100>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc0>;
@@ -64,6 +66,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x101>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc1>;
@@ -77,6 +80,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x102>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc2>;
@@ -90,6 +94,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x103>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc3>;
@@ -103,6 +108,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x0>;
 			qcom,acc = <&acc4>;
 			qcom,saw = <&saw4>;
@@ -121,6 +127,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x1>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc5>;
@@ -134,6 +141,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x2>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc6>;
@@ -147,6 +155,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x3>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc7>;
@@ -896,28 +905,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1172,8 +1203,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1291,8 +1322,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1360,8 +1391,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
 
@@ -1761,9 +1792,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
@@ -1775,9 +1803,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
index af4c341e2533..273e79fb7569 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,msm8953.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -44,6 +47,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -54,6 +59,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +71,8 @@
 			reg = <0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -74,6 +83,8 @@
 			reg = <0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -84,6 +95,8 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -94,6 +107,8 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -104,6 +119,8 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -114,6 +131,8 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -470,6 +489,13 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8953-bimc";
+			reg = <0x00400000 0x5a000>;
+
+			#interconnect-cells = <2>;
+		};
+
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
@@ -486,6 +512,29 @@
 			reg = <0x004ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8953-pcnoc";
+			reg = <0x00500000 0x12080>;
+
+			clocks = <&gcc GCC_PCNOC_USB3_AXI_CLK>;
+			clock-names = "pcnoc_usb3_axi";
+
+			#interconnect-cells = <2>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8953-snoc";
+			reg = <0x00580000 0x16080>;
+
+			#interconnect-cells = <2>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8953-snoc-mm";
+
+				#interconnect-cells = <2>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
 			reg = <0x01000000 0x300000>;
@@ -767,6 +816,20 @@
 				bias-disable;
 			};
 
+			uart_5_default: uart-5-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "blsp_uart5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			uart_5_sleep: uart-5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -807,10 +870,10 @@
 			#power-domain-cells = <1>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "sleep",
 				      "dsi0pll",
@@ -849,6 +912,13 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&snoc_mm MAS_MDP RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_DISP_SS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>,
@@ -917,8 +987,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -987,8 +1057,8 @@
 
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -1065,6 +1135,11 @@
 				      "alwayson";
 			power-domains = <&gcc OXILI_GX_GDSC>;
 
+			interconnects = <&bimc MAS_OXILI RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_GPU_CFG RPM_ACTIVE_TAG>;
+
 			iommus = <&gpu_iommu 0>;
 			operating-points-v2 = <&gpu_opp_table>;
 
@@ -1302,6 +1377,13 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133330000>;
 
+			interconnects = <&pcnoc MAS_USB3 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_USB3 RPM_ACTIVE_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			power-domains = <&gcc USB30_GDSC>;
 
 			qcom,select-utmi-as-pipe-clk;
@@ -1354,6 +1436,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_1 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -1374,26 +1463,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <200000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-192000000 {
 					opp-hz = /bits/ 64 <192000000>;
+					opp-peak-kBps = <800000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <300000>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1414,6 +1513,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_2 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -1430,26 +1536,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <800000>, <400000>;
+					opp-avg-kBps = <130718>, <130718>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-177770000 {
 					opp-hz = /bits/ 64 <177770000>;
+					opp-peak-kBps = <600000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1592,6 +1708,24 @@
 			qcom,controlled-remotely;
 		};
 
+		uart_5: serial@7aef000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07aef000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+
+			pinctrl-0 = <&uart_5_default>;
+			pinctrl-1 = <&uart_5_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+		};
+
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af5000 0x600>;
@@ -1932,19 +2066,19 @@
 							#sound-dai-cells = <1>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 								direction = <Q6ASM_DAI_TX>;
 							};
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@3 {
-								reg = <3>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 								direction = <Q6ASM_DAI_RX>;
 								is-compress-dai;
 							};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
index d036f31dfdca..e2ac2fd6882f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8976.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -824,10 +825,10 @@
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -970,8 +971,8 @@
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 
@@ -1046,8 +1047,8 @@
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
index 4520d5d51a29..6a231afad85d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
@@ -93,26 +93,32 @@
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu2 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu3 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu4 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu5 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &pm8994_resin {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 38035e0db80b..63ab564655bc 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -288,15 +288,15 @@
 	#size-cells = <0>;
 
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -492,6 +492,11 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
+		vreg_lvs2a: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
index 7a61117b2602..6095ee097ba0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -41,6 +41,8 @@
 
 &slpi_pil {
 	firmware-name = "/*(DEBLOBBED)*/";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
index 2552a66f5809..fa83b7a42c2f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -42,6 +42,8 @@
 
 &slpi_pil {
 	firmware-name = "/*(DEBLOBBED)*/";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 9bc1115c54c8..879a02cbf70f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -137,15 +137,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -156,10 +156,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "gemini";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4719e1fc70d2..ede851fbf628 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -937,10 +938,10 @@
 			clocks = <&xo_board>,
 				 <&gcc GPLL0>,
 				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <&mdss_hdmi_phy>;
 			clock-names = "xo",
 				      "gpll0",
@@ -1071,8 +1072,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1139,8 +1142,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
index 0118cd3d3cd3..2f2ac37bd376 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -87,15 +87,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
index baf16cd076d7..8d9667a7a3f5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -139,15 +139,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index f1ceaedd9520..f5558495cb02 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -372,6 +372,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index 4ba14c9d6d60..a6440ebf1d9d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -100,6 +100,12 @@
 	};
 };
 
+&venus {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &wifi {
-	qcom,ath10k-calibration-variant = "Lenovo_Miix630";
+	qcom,calibration-variant = "Lenovo_Miix630";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-mtp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index 7c77612fb990..ad425267e902 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -156,6 +156,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d8cc0d729e99..3650f2501886 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -450,6 +450,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c2caad85c668..58cee37cb8ee 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2,6 +2,7 @@
 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
@@ -2790,11 +2791,11 @@
 				      "gpll0_div";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&gcc GCC_MMSS_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_hdmi_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_hdmi_phy>,
 				 <0>,
 				 <0>,
 				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
@@ -2829,8 +2830,8 @@
 				compatible = "qcom,msm8998-dpu";
 				reg = <0x0c901000 0x8f000>,
 				      <0x0c9a8e00 0xf0>,
-				      <0x0c9b0000 0x2008>,
-				      <0x0c9b8000 0x1040>;
+				      <0x0c9b0000 0x3000>,
+				      <0x0c9b8000 0x3000>;
 				reg-names = "mdp",
 					    "regdma",
 					    "vbif",
@@ -2932,8 +2933,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -3008,8 +3009,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 						  <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/pm8937.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/pm8937.dtsi
index 42b3575b36ff..77809c3534a7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/pm8937.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/pm8937.dtsi
@@ -143,6 +143,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8937_pwm: pwm {
+			compatible = "qcom,pm8937-pwm", "qcom,pm8916-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pm8937_spmi_regulators: regulators {
 			compatible = "qcom,pm8937-regulators";
 		};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594..f49ac1c1f8a3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -550,6 +551,13 @@
 				bias-disable;
 			};
 
+			qup_uart3_default: qup-uart3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			qup_uart4_default: qup-uart4-default-state {
 				pins = "gpio12", "gpio13";
 				function = "qup4";
@@ -749,6 +757,30 @@
 			#interconnect-cells = <2>;
 		};
 
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -1073,7 +1105,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1092,7 +1124,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1137,7 +1169,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1184,7 +1216,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1231,7 +1263,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1239,6 +1271,23 @@
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1278,7 +1327,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1297,7 +1346,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1342,7 +1391,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1616,7 +1665,7 @@
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,qcm2290-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 
@@ -1702,8 +1751,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd QCM2290_VDDCX>;
@@ -1785,8 +1834,8 @@
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>;
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "gcc_disp_gpll0_clk_src",
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 2a000abd8260..570693923fd5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -14,6 +14,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include "sc7280.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
@@ -101,7 +103,15 @@
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&ocp96011_sbu_mux>;
 					};
 				};
 			};
@@ -138,6 +148,51 @@
 		vin-supply = <&vreg_s8b>;
 	};
 
+	vreg_oled_dvdd: regulator-oled-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s1b>;
+
+		regulator-boot-on;
+	};
+
+	vreg_oled_vci: regulator-oled-vci {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_vci";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l13c>;
+
+		regulator-boot-on;
+	};
+
+	vreg_usb_redrive_1v8: regulator-usb-redrive-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_REDRIVE_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+
+		regulator-boot-on;
+
+		pinctrl-0 = <&usb_redrive_1v8_en_default>;
+		pinctrl-names = "default";
+	};
+
 	reserved-memory {
 		cont_splash_mem: cont-splash@e1000000 {
 			reg = <0x0 0xe1000000 0x0 0x2300000>;
@@ -597,11 +652,6 @@
 	};
 };
 
-&dispcc {
-	/* Disable for now so simple-framebuffer continues working */
-	status = "disabled";
-};
-
 &gcc {
 	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
 			   <GCC_EDP_CLKREF_EN>,
@@ -628,6 +678,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "/*(DEBLOBBED)*/";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -702,7 +760,26 @@
 	};
 
 	/* Pixelworks @ 26 */
-	/* FSA4480 USB audio switch @ 42 */
+
+	typec-mux@42 {
+		compatible = "ocs,ocp96011", "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			ocp96011_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+				data-lanes = <1 0>;
+			};
+		};
+	};
+
 	/* AW86927FCR haptics @ 5a */
 };
 
@@ -716,7 +793,36 @@
 &i2c4 {
 	status = "okay";
 
-	/* PTN36502 USB redriver @ 1a */
+	typec-mux@1a {
+		compatible = "nxp,ptn36502";
+		reg = <0x1a>;
+
+		vdd18-supply = <&vreg_usb_redrive_1v8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c9 {
@@ -733,6 +839,54 @@
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_oled_vci>;
+		vddio-supply = <&vreg_l12c>;
+		dvdd-supply = <&vreg_oled_dvdd>;
+
+		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c>;
+	status = "okay";
+};
+
 &pm7250b_adc {
 	pinctrl-0 = <&pm7250b_adc_default>;
 	pinctrl-names = "default";
@@ -995,10 +1149,49 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp5-sndcard";
+	model = "Fairphone 5";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	displayport-rx-dai-link {
+		link-name = "DisplayPort Playback";
+
+		codec {
+			sound-dai = <&mdss_dp>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &spi13 {
 	status = "okay";
 
-	/* Goodix touchscreen @ 0 */
+	touchscreen@0 {
+		compatible = "goodix,gt9897";
+		reg = <0>;
+		interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&vreg_l3c>;
+		vddio-supply = <&vreg_l2c>;
+		spi-max-frequency = <1000000>;
+		touchscreen-size-x = <1224>;
+		touchscreen-size-y = <2700>;
+	};
 };
 
 &tlmm {
@@ -1015,6 +1208,20 @@
 		bias-disable;
 	};
 
+	disp_reset_n_active: disp-reset-n-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp_reset_n_suspend: disp-reset-n-suspend-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio155";
 		function = "gpio";
@@ -1022,6 +1229,13 @@
 		bias-pull-up;
 	};
 
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pm8008_int_default: pm8008-int-default-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -1080,6 +1294,14 @@
 		function = "gpio";
 		bias-pull-down;
 	};
+
+	usb_redrive_1v8_en_default: usb-redrive-1v8-en-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
 };
 
 &uart5 {
@@ -1154,10 +1376,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l10c>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1184,12 +1402,16 @@
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
 &venus {
 	firmware-name = "/*(DEBLOBBED)*/";
 	status = "okay";
 };
 
 &wifi {
-	qcom,ath11k-calibration-variant = "Fairphone_5";
+	qcom,calibration-variant = "Fairphone_5";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index bf650d237aaf..0c6094aada41 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -507,6 +507,27 @@
 	};
 };
 
+&gcc {
+	protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
+			   <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
+			   <GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
+			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
+			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
+			   <GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
+			   <GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
+			   <GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
+			   <GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
+			   <GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
+			   <GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;
+};
+
 &gpu {
 	status = "okay";
 };
@@ -755,7 +776,12 @@
 
 &wifi {
 	memory-region = <&wlan_fw_mem>;
-	qcom,ath11k-calibration-variant = "Qualcomm_qcm6490idp";
+	qcom,calibration-variant = "Qualcomm_qcm6490idp";
 
 	status = "okay";
 };
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index 42d38108e09c..4b90b678c178 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
- * Copyright (c) 2024, Caleb Connolly <caleb@postmarketos.org>
+ * Copyright (c) 2024, Casey Connolly <casey.connolly@linaro.org>
  */
 
 /dts-v1/;
@@ -953,7 +953,7 @@
 };
 
 &wifi {
-	qcom,ath11k-calibration-variant = "SHIFTphone_8";
+	qcom,calibration-variant = "SHIFTphone_8";
 
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs615.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs615.dtsi
index f4abfad474ea..bb8b6c3ebd03 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -417,6 +417,12 @@
 		#size-cells = <2>;
 		ranges;
 
+		aop_cmd_db_mem: aop-cmd-db@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
 		smem_region: smem@86000000 {
 			compatible = "qcom,smem";
 			reg = <0x0 0x86000000 0x0 0x200000>;
@@ -453,6 +459,11 @@
 			};
 		};
 
+		rng@793000 {
+			compatible = "qcom,qcs615-trng", "qcom,trng";
+			reg = <0x0 0x00793000 0x0 0x1000>;
+		};
+
 		sdhc_1: mmc@7c4000 {
 			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x0 0x007c4000 0x0 0x1000>,
@@ -1022,10 +1033,10 @@
 				      "bus_aggr_clk",
 				      "iface_clk",
 				      "core_clk_unipro",
-				      "core_clk_ice",
 				      "ref_clk",
 				      "tx_lane0_sync_clk",
-				      "rx_lane0_sync_clk";
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
 
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
@@ -1060,10 +1071,10 @@
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <37500000>,
-						 /bits/ 64 <75000000>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
-						 /bits/ 64 <0>;
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 				};
 
@@ -1072,10 +1083,10 @@
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <75000000>,
-						 /bits/ 64 <150000000>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
-						 /bits/ 64 <0>;
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>;
 					required-opps = <&rpmhpd_opp_svs>;
 				};
 
@@ -1084,10 +1095,10 @@
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <150000000>,
-						 /bits/ 64 <300000000>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
-						 /bits/ 64 <0>;
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
 					required-opps = <&rpmhpd_opp_nom>;
 				};
 			};
@@ -1114,6 +1125,29 @@
 			status = "disabled";
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x0104 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0104 0x0011>;
+			interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x20000>;
@@ -1819,7 +1853,7 @@
 			in-ports {
 				port {
 					replicator0_in: endpoint {
-						remote-endpoint= <&tmc_etf_out>;
+						remote-endpoint = <&tmc_etf_out>;
 					};
 				};
 			};
@@ -1832,7 +1866,7 @@
 					reg = <1>;
 
 					replicator0_out1: endpoint {
-						remote-endpoint= <&replicator1_in>;
+						remote-endpoint = <&replicator1_in>;
 					};
 				};
 			};
@@ -1872,7 +1906,7 @@
 			in-ports {
 				port {
 					replicator1_in: endpoint {
-						remote-endpoint= <&replicator0_out1>;
+						remote-endpoint = <&replicator0_out1>;
 					};
 				};
 			};
@@ -1880,7 +1914,7 @@
 			out-ports {
 				port {
 					replicator1_out: endpoint {
-						remote-endpoint= <&funnel_swao_in6>;
+						remote-endpoint = <&funnel_swao_in6>;
 					};
 				};
 			};
@@ -2311,7 +2345,7 @@
 					reg = <6>;
 
 					funnel_swao_in6: endpoint {
-						remote-endpoint= <&replicator1_out>;
+						remote-endpoint = <&replicator1_out>;
 					};
 				};
 
@@ -2319,7 +2353,7 @@
 					reg = <7>;
 
 					funnel_swao_in7: endpoint {
-						remote-endpoint= <&tpda_swao_out>;
+						remote-endpoint = <&tpda_swao_out>;
 					};
 				};
 			};
@@ -2343,7 +2377,7 @@
 			in-ports {
 				port {
 					tmc_etf_swao_in: endpoint {
-						remote-endpoint= <&funnel_swao_out>;
+						remote-endpoint = <&funnel_swao_out>;
 					};
 				};
 			};
@@ -2351,7 +2385,7 @@
 			out-ports {
 				port {
 					tmc_etf_swao_out: endpoint {
-						remote-endpoint= <&replicator_swao_in>;
+						remote-endpoint = <&replicator_swao_in>;
 					};
 				};
 			};
@@ -3197,14 +3231,13 @@
 			interrupt-controller;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		sram@c3f0000 {
@@ -3304,7 +3337,6 @@
 			#interrupt-cells = <4>;
 			#address-cells = <2>;
 			#size-cells = <0>;
-			cell-index = <0>;
 			qcom,channel = <0>;
 			qcom,ee = <0>;
 		};
@@ -3590,6 +3622,7 @@
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -3651,6 +3684,7 @@
 				phy-names = "usb2-phy";
 
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
new file mode 100644
index 000000000000..619a42b5ef48
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+*/
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&spi11 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	st33htpm0: tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
new file mode 100644
index 000000000000..b9e4a5214f70
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of rb3gen2 core kit.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The port index denotes CSIPHY id i.e. csiphy3 */
+		port@3 {
+			reg = <3>;
+
+			csiphy3_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_l18b_1p8>;
+		avdd-supply = <&vph_pwr>;
+		dvdd-supply = <&vph_pwr>;
+
+		port {
+			imx577_ep: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam2_default: cam2-default-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam2_suspend: cam2-suspend-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 20a3f908717e..2f41ca47ced8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 /dts-v1/;
@@ -9,6 +9,8 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -34,6 +36,7 @@
 
 	aliases {
 		serial0 = &uart5;
+		serial1 = &uart7;
 	};
 
 	chosen {
@@ -174,6 +177,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -212,12 +216,107 @@
 		};
 	};
 
+	thermal-zones {
+		sdm-skin-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
 		regulator-min-microvolt = <3700000>;
 		regulator-max-microvolt = <3700000>;
 	};
+
+	wcn6750-pmu {
+		compatible = "qcom,wcn6750-pmu";
+		pinctrl-0 = <&bt_en>;
+		pinctrl-names = "default";
+		vddaon-supply = <&vreg_s7b_0p972>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddpmu-supply = <&vreg_s7b_0p972>;
+		vddrfa0p8-supply = <&vreg_s7b_0p972>;
+		vddrfa1p2-supply = <&vreg_s8b_1p272>;
+		vddrfa1p7-supply = <&vreg_s1b_1p872>;
+		vddrfa2p2-supply = <&vreg_s1c_2p19>;
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -745,6 +844,36 @@
 	};
 };
 
+&pm7325_temp_alarm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pm8350c_pwm {
 	nvmem = <&pmk8350_sdam_21>,
 		<&pmk8350_sdam_22>;
@@ -789,6 +918,44 @@
 	status = "okay";
 };
 
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@103 {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -799,6 +966,39 @@
 	status = "okay";
 };
 
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -842,12 +1042,90 @@
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
+
+	bt_en: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
 };
 
 &uart5 {
 	status = "okay";
 };
 
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default",
+			"sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		max-speed = <3200000>;
+	};
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -919,7 +1197,7 @@
 
 &wifi {
 	memory-region = <&wlan_fw_mem>;
-	qcom,ath11k-calibration-variant = "Qualcomm_rb3gen2";
+	qcom,calibration-variant = "Qualcomm_rb3gen2";
 
 	status = "okay";
 };
@@ -986,3 +1264,8 @@
 		bias-pull-up;
 	};
 };
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
new file mode 100644
index 000000000000..a94b0bfa98dc
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8620au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8620au_0_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pmm8620au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8650au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8650au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs8300-ride.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index d0ad1f63d2bb..f07e0d0e9edc 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
 / {
 	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
 	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
@@ -21,6 +22,16 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &apps_rsc {
@@ -257,7 +268,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -285,6 +295,15 @@
 	};
 };
 
+&pmm8650au_1_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio7";
+		function = "normal";
+		output-enable;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -354,6 +373,14 @@
 	status = "okay";
 };
 
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
 &usb_qmpphy {
 	vdda-phy-supply = <&vreg_l7a>;
 	vdda-pll-supply = <&vreg_l5a>;
@@ -368,3 +395,11 @@
 &usb_1_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs8300.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 4a057f7c0d9f..009f9658a4fa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
@@ -51,6 +52,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -70,6 +72,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_1: l2-cache {
 				compatible = "cache";
@@ -89,6 +92,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 
 			l2_2: l2-cache {
 				compatible = "cache";
@@ -108,6 +112,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 
 			l2_3: l2-cache {
 				compatible = "cache";
@@ -127,6 +132,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 
 			l2_4: l2-cache {
 				compatible = "cache";
@@ -146,6 +152,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 
 			l2_5: l2-cache {
 				compatible = "cache";
@@ -165,6 +172,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 
 			l2_6: l2-cache {
 				compatible = "cache";
@@ -184,6 +192,7 @@
 			power-domain-names = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 
 			l2_7: l2-cache {
 				compatible = "cache";
@@ -351,6 +360,15 @@
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -627,6 +645,29 @@
 			#size-cells = <1>;
 		};
 
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x416 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x9c0000 0x0 0x2000>;
@@ -637,140 +678,1354 @@
 				      "s-ahb";
 			#address-cells = <2>;
 			#size-cells = <2>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			dma-coherent;
 			status = "disabled";
 
-			uart7: serial@99c000 {
-				compatible = "qcom,geni-debug-uart";
-				reg = <0x0 0x0099c000 0x0 0x4000>;
-				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
-				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-0 = <&qup_i2c0_data_clk>;
 				pinctrl-names = "default";
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
 				status = "disabled";
 			};
-		};
-
-		rng: rng@10d2000 {
-			compatible = "qcom,qcs8300-trng", "qcom,trng";
-			reg = <0x0 0x010d2000 0x0 0x1000>;
-		};
 
-		config_noc: interconnect@14c0000 {
-			compatible = "qcom,qcs8300-config-noc";
-			reg = <0x0 0x014c0000 0x0 0x13080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>,
+					    <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
 
-		system_noc: interconnect@1680000 {
-			compatible = "qcom,qcs8300-system-noc";
-			reg = <0x0 0x01680000 0x0 0x15080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-		aggre1_noc: interconnect@16c0000 {
-			compatible = "qcom,qcs8300-aggre1-noc";
-			reg = <0x0 0x016c0000 0x0 0x17080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-		aggre2_noc: interconnect@1700000 {
-			compatible = "qcom,qcs8300-aggre2-noc";
-			reg = <0x0 0x01700000 0x0 0x1a080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>,
+					    <&qup_uart1_tx>, <&qup_uart1_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
 
-		pcie_anoc: interconnect@1760000 {
-			compatible = "qcom,qcs8300-pcie-anoc";
-			reg = <0x0 0x01760000 0x0 0xc080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-		gpdsp_anoc: interconnect@1780000 {
-			compatible = "qcom,qcs8300-gpdsp-anoc";
-			reg = <0x0 0x01780000 0x0 0xd080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-		mmss_noc: interconnect@17a0000 {
-			compatible = "qcom,qcs8300-mmss-noc";
-			reg = <0x0 0x017a0000 0x0 0x40000>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+					    <&qup_uart2_tx>, <&qup_uart2_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
 
-		ufs_mem_hc: ufs@1d84000 {
-			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
-			reg = <0x0 0x01d84000 0x0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy>;
-			phy-names = "ufsphy";
-			lanes-per-direction = <2>;
-			#reset-cells = <1>;
-			resets = <&gcc GCC_UFS_PHY_BCR>;
-			reset-names = "rst";
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-			iommus = <&apps_smmu 0x100 0x0>;
-			dma-coherent;
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>,
+					    <&qup_uart3_tx>, <&qup_uart3_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
 
-			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "ufs-ddr",
-					     "cpu-ufs";
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
-				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-				 <&gcc GCC_UFS_PHY_AHB_CLK>,
-				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			clock-names = "core_clk",
-				      "bus_aggr_clk",
-				      "iface_clk",
-				      "core_clk_unipro",
-				      "ref_clk",
-				      "tx_lane0_sync_clk",
-				      "rx_lane0_sync_clk",
-				      "rx_lane1_sync_clk";
-			freq-table-hz = <75000000 300000000>,
-					<0 0>,
-					<0 0>,
-					<75000000 300000000>,
-					<0 0>,
-					<0 0>,
-					<0 0>,
-					<0 0>;
-			qcom,ice = <&ice>;
-			status = "disabled";
-		};
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
 
-		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
-			reg = <0x0 0x01d87000 0x0 0xe10>;
-			/*
-			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
-			 * enables the CXO clock to eDP *and* UFS PHY.
-			 */
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+					    <&qup_uart4_tx>, <&qup_uart4_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>,
+					    <&qup_uart5_tx>, <&qup_uart5_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+					    <&qup_uart6_tx>, <&qup_uart6_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x456 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>,
+					    <&qup_uart8_tx>, <&qup_uart8_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>,
+					    <&qup_uart9_tx>, <&qup_uart9_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>,
+					    <&qup_uart10_tx>, <&qup_uart10_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>,
+					    <&qup_uart12_tx>, <&qup_uart12_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>,
+					    <&qup_uart13_tx>, <&qup_uart13_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>,
+					    <&qup_uart14_tx>, <&qup_uart14_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>,
+					    <&qup_uart15_tx>, <&qup_uart15_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma3: dma-controller@b00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xb00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			dma-channels = <4>;
+			dma-channel-mask = <0xf>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c16: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma3 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma3 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart16: serial@b80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>,
+					    <&qup_uart16_tx>, <&qup_uart16_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d2000 {
+			compatible = "qcom,qcs8300-trng", "qcom,trng";
+			reg = <0x0 0x010d2000 0x0 0x1000>;
+		};
+
+		config_noc: interconnect@14c0000 {
+			compatible = "qcom,qcs8300-config-noc";
+			reg = <0x0 0x014c0000 0x0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,qcs8300-system-noc";
+			reg = <0x0 0x01680000 0x0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16c0000 {
+			compatible = "qcom,qcs8300-aggre1-noc";
+			reg = <0x0 0x016c0000 0x0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,qcs8300-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1a080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@1760000 {
+			compatible = "qcom,qcs8300-pcie-anoc";
+			reg = <0x0 0x01760000 0x0 0xc080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gpdsp_anoc: interconnect@1780000 {
+			compatible = "qcom,qcs8300-gpdsp-anoc";
+			reg = <0x0 0x01780000 0x0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@17a0000 {
+			compatible = "qcom,qcs8300-mmss-noc";
+			reg = <0x0 0x017a0000 0x0 0x40000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			qcom,ice = <&ice>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_EDP_REF_CLKREF_EN>;
 			clock-names = "ref",
@@ -778,161 +2033,591 @@
 				      "qref";
 			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
 
-			resets = <&ufs_mem_hc 0>;
-			reset-names = "ufsphy";
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <20>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,qcs8300-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs8300-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x3000000 0x0 0x00100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					memory-region = <&adsp_rpc_remote_heap_mem>;
+					qcom,vmids = <QCOM_SCM_VMID_LPASS
+						      QCOM_SCM_VMID_ADSP_HEAP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2003 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2004 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2005 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,qcs8300-lpass-ag-noc";
+			reg = <0x0 0x03c40000 0x0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		stm@4002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x04002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@4004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					qdss_tpda_in1: endpoint {
+						remote-endpoint = <&qdss_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint = <&funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@400f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0400f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm1_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel0_in6: endpoint {
+						remote-endpoint = <&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_funnel1_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel1_in5: endpoint {
+						remote-endpoint = <&dlct0_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel1_in6: endpoint {
+						remote-endpoint = <&dlmm_funnel_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel1_in7: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					qdss_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					qdss_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4841000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04841000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					prng_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in19>;
+					};
+				};
+			};
+		};
+
+		tpdm@4850000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04850000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					pimem_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in25>;
+					};
+				};
+			};
+		};
+
+		tpdm@4860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-			#phy-cells = <0>;
-			status = "disabled";
-		};
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
-		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
-			reg = <0x0 0x01dc4000 0x0 0x28000>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-			num-channels = <20>;
-			qcom,num-ees = <4>;
-			iommus = <&apps_smmu 0x480 0x00>,
-				 <&apps_smmu 0x481 0x00>;
+			out-ports {
+				port {
+					dlst_ch_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_in8>;
+					};
+				};
+			};
 		};
 
-		crypto: crypto@1dfa000 {
-			compatible = "qcom,qcs8300-qce", "qcom,qce";
-			reg = <0x0 0x01dfa000 0x0 0x6000>;
-			dmas = <&cryptobam 4>, <&cryptobam 5>;
-			dma-names = "rx", "tx";
-			iommus = <&apps_smmu 0x480 0x00>,
-				 <&apps_smmu 0x481 0x00>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "memory";
-		};
+		tpda@4864000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04864000 0x0 0x1000>;
 
-		ice: crypto@1d88000 {
-			compatible = "qcom,qcs8300-inline-crypto-engine",
-				     "qcom,inline-crypto-engine";
-			reg = <0x0 0x01d88000 0x0 0x18000>;
-			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-		};
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x0 0x01f40000 0x0 0x20000>;
-			#hwlock-cells = <1>;
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_ch_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_ch_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_tpda_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in0>;
+					};
+				};
+			};
 		};
 
-		tcsr: syscon@1fc0000 {
-			compatible = "qcom,qcs8300-tcsr", "syscon";
-			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		funnel@4865000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04865000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlst_ch_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlst_ch_funnel_in4: endpoint {
+						remote-endpoint = <&dlst_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					dlst_ch_funnel_in6: endpoint {
+						remote-endpoint = <&gdsp_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in7>;
+					};
+				};
+			};
 		};
 
-		remoteproc_adsp: remoteproc@3000000 {
-			compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
-			reg = <0x0 0x3000000 0x0 0x00100>;
+		tpdm@4980000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04980000 0x0 0x1000>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx",
-					     "lmx";
+			out-ports {
+				port {
+					turing2_tpdm_out: endpoint {
+						remote-endpoint = <&turing2_funnel_in0>;
+					};
+				};
+			};
+		};
 
-			memory-region = <&adsp_mem>;
+		funnel@4983000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04983000 0x0 0x1000>;
 
-			qcom,qmp = <&aoss_qmp>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
+			in-ports {
+				port {
+					turing2_funnel_in0: endpoint {
+						remote-endpoint = <&turing2_tpdm_out>;
+					};
+				};
+			};
 
-			status = "disabled";
+			out-ports {
+				port {
+					turing2_funnel_out0: endpoint {
+						remote-endpoint = <&gdsp_tpda_in5>;
+					};
+				};
+			};
+		};
 
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+		tpdm@4ac0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ac0000 0x0 0x1000>;
 
-				label = "lpass";
-				qcom,remote-pid = <2>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					memory-region = <&adsp_rpc_remote_heap_mem>;
-					qcom,vmids = <QCOM_SCM_VMID_LPASS
-						      QCOM_SCM_VMID_ADSP_HEAP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2003 0x0>;
-						dma-coherent;
+			out-ports {
+				port {
+					dlmm_tpdm0_out: endpoint {
+						remote-endpoint = <&dlmm_tpda_in27>;
 					};
+				};
+			};
+		};
 
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2004 0x0>;
-						dma-coherent;
+		tpda@4ac4000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04ac4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1b {
+					reg = <27>;
+
+					dlmm_tpda_in27: endpoint {
+						remote-endpoint = <&dlmm_tpdm0_out>;
 					};
+				};
+			};
 
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2005 0x0>;
-						dma-coherent;
+			out-ports {
+				port {
+					dlmm_tpda_out: endpoint {
+						remote-endpoint = <&dlmm_funnel_in0>;
 					};
 				};
 			};
 		};
 
-		lpass_ag_noc: interconnect@3c40000 {
-			compatible = "qcom,qcs8300-lpass-ag-noc";
-			reg = <0x0 0x03c40000 0x0 0x17200>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
+		funnel@4ac5000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ac5000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlmm_funnel_in0: endpoint {
+						remote-endpoint = <&dlmm_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlmm_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in6>;
+					};
+				};
+			};
 		};
 
-		stm@4002000 {
-			compatible = "arm,coresight-stm", "arm,primecell";
-			reg = <0x0 0x04002000 0x0 0x1000>,
-			      <0x0 0x16280000 0x0 0x180000>;
-			reg-names = "stm-base",
-				    "stm-stimulus-base";
+		tpdm@4ad0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ad0000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
 			out-ports {
 				port {
-					stm_out: endpoint {
-						remote-endpoint = <&funnel0_in7>;
+					dlct0_tpdm0_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in26>;
 					};
 				};
 			};
 		};
 
-		tpda@4004000 {
+		tpda@4ad3000 {
 			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04004000 0x0 0x1000>;
+			reg = <0x0 0x04ad3000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -941,46 +2626,80 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port@13 {
+					reg = <19>;
 
-					qdss_tpda_in1: endpoint {
-						remote-endpoint = <&qdss_tpdm1_out>;
+					dlct0_tpda_in19: endpoint {
+						remote-endpoint = <&prng_tpdm_out>;
+					};
+				};
+
+				port@19 {
+					reg = <25>;
+
+					dlct0_tpda_in25: endpoint {
+						remote-endpoint = <&pimem_tpdm_out>;
+					};
+				};
+
+				port@1a {
+					reg = <26>;
+
+					dlct0_tpda_in26: endpoint {
+						remote-endpoint = <&dlct0_tpdm0_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					qdss_tpda_out: endpoint {
-						remote-endpoint = <&funnel0_in6>;
+					dlct0_tpda_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in0>;
 					};
 				};
 			};
 		};
 
-		tpdm@400f000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x0400f000 0x0 0x1000>;
+		funnel@4ad4000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ad4000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,cmb-element-bits = <32>;
-			qcom,cmb-msrs-num = <32>;
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlct0_funnel_in0: endpoint {
+						remote-endpoint = <&dlct0_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlct0_funnel_in4: endpoint {
+						remote-endpoint = <&ddr_funnel5_out>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-					qdss_tpdm1_out: endpoint {
-						remote-endpoint = <&qdss_tpda_in1>;
+					dlct0_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
 					};
 				};
 			};
 		};
 
-		funnel@4041000 {
+		funnel@4b04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04041000 0x0 0x1000>;
+			reg = <0x0 0x04b04000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -992,85 +2711,85 @@
 				port@6 {
 					reg = <6>;
 
-					funnel0_in6: endpoint {
-						remote-endpoint = <&qdss_tpda_out>;
+					aoss_funnel_in6: endpoint {
+						remote-endpoint = <&aoss_tpda_out>;
 					};
 				};
 
 				port@7 {
 					reg = <7>;
 
-					funnel0_in7: endpoint {
-						remote-endpoint = <&stm_out>;
+					aoss_funnel_in7: endpoint {
+						remote-endpoint = <&qdss_funnel_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					funnel0_out: endpoint {
-						remote-endpoint = <&qdss_funnel_in0>;
+					aoss_funnel_out: endpoint {
+						remote-endpoint = <&etf0_in>;
 					};
 				};
 			};
 		};
 
-		funnel@4042000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04042000 0x0 0x1000>;
+		tmc_etf: tmc@4b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04b05000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@4 {
-					reg = <4>;
-
-					funnel1_in4: endpoint {
-						remote-endpoint = <&apss_funnel1_out>;
+				port {
+					etf0_in: endpoint {
+						remote-endpoint = <&aoss_funnel_out>;
 					};
 				};
+			};
 
-				port@5 {
-					reg = <5>;
-
-					funnel1_in5: endpoint {
-						remote-endpoint = <&dlct0_funnel_out>;
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint = <&swao_rep_in>;
 					};
 				};
+			};
+		};
 
-				port@6 {
-					reg = <6>;
-
-					funnel1_in6: endpoint {
-						remote-endpoint = <&dlmm_funnel_out>;
-					};
-				};
+		replicator@4b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04b06000 0x0 0x1000>;
 
-				port@7 {
-					reg = <7>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-					funnel1_in7: endpoint {
-						remote-endpoint = <&dlst_ch_funnel_out>;
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint = <&etf0_out>;
 					};
 				};
 			};
 
 			out-ports {
-				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&qdss_funnel_in1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					swao_rep_out1: endpoint {
+						remote-endpoint = <&eud_in>;
 					};
 				};
 			};
 		};
 
-		funnel@4045000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04045000 0x0 0x1000>;
+		tpda@4b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04b08000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1082,165 +2801,132 @@
 				port@0 {
 					reg = <0>;
 
-					qdss_funnel_in0: endpoint {
-						remote-endpoint = <&funnel0_out>;
+					aoss_tpda_in0: endpoint {
+						remote-endpoint = <&aoss_tpdm0_out>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
 
-					qdss_funnel_in1: endpoint {
-						remote-endpoint = <&funnel1_out>;
+					aoss_tpda_in1: endpoint {
+						remote-endpoint = <&aoss_tpdm1_out>;
 					};
 				};
-			};
 
-			out-ports {
-				port {
-					qdss_funnel_out: endpoint {
-						remote-endpoint = <&aoss_funnel_in7>;
+				port@2 {
+					reg = <2>;
+
+					aoss_tpda_in2: endpoint {
+						remote-endpoint = <&aoss_tpdm2_out>;
 					};
 				};
-			};
-		};
 
-		tpdm@4841000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04841000 0x0 0x1000>;
+				port@3 {
+					reg = <3>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+					aoss_tpda_in3: endpoint {
+						remote-endpoint = <&aoss_tpdm3_out>;
+					};
+				};
 
-			qcom,cmb-element-bits = <32>;
-			qcom,cmb-msrs-num = <32>;
+				port@4 {
+					reg = <4>;
 
-			out-ports {
-				port {
-					prng_tpdm_out: endpoint {
-						remote-endpoint = <&dlct0_tpda_in19>;
+					aoss_tpda_in4: endpoint {
+						remote-endpoint = <&aoss_tpdm4_out>;
 					};
 				};
 			};
-		};
-
-		tpdm@4850000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04850000 0x0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					pimem_tpdm_out: endpoint {
-						remote-endpoint = <&dlct0_tpda_in25>;
+					aoss_tpda_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in6>;
 					};
 				};
 			};
 		};
 
-		tpdm@4860000 {
+		tpdm@4b09000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04860000 0x0 0x1000>;
+			reg = <0x0 0x04b09000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					dlst_ch_tpdm0_out: endpoint {
-						remote-endpoint = <&dlst_ch_tpda_in8>;
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in0>;
 					};
 				};
 			};
 		};
 
-		tpda@4864000 {
-			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04864000 0x0 0x1000>;
+		tpdm@4b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0a000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@8 {
-					reg = <8>;
-
-					dlst_ch_tpda_in8: endpoint {
-						remote-endpoint = <&dlst_ch_tpdm0_out>;
-					};
-				};
-			};
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					dlst_ch_tpda_out: endpoint {
-						remote-endpoint = <&dlst_ch_funnel_in0>;
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in1>;
 					};
 				};
 			};
 		};
 
-		funnel@4865000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04865000 0x0 0x1000>;
+		tpdm@4b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0b000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
 
-					dlst_ch_funnel_in0: endpoint {
-						remote-endpoint = <&dlst_ch_tpda_out>;
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in2>;
 					};
 				};
+			};
+		};
 
-				port@4 {
-					reg = <4>;
-
-					dlst_ch_funnel_in4: endpoint {
-						remote-endpoint = <&dlst_funnel_out>;
-					};
-				};
+		tpdm@4b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0c000 0x0 0x1000>;
 
-				port@6 {
-					reg = <6>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-					dlst_ch_funnel_in6: endpoint {
-						remote-endpoint = <&gdsp_funnel_out>;
-					};
-				};
-			};
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					dlst_ch_funnel_out: endpoint {
-						remote-endpoint = <&funnel1_in7>;
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in3>;
 					};
 				};
 			};
 		};
 
-		tpdm@4980000 {
+		tpdm@4b0d000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04980000 0x0 0x1000>;
+			reg = <0x0 0x04b0d000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1250,40 +2936,24 @@
 
 			out-ports {
 				port {
-					turing2_tpdm_out: endpoint {
-						remote-endpoint = <&turing2_funnel_in0>;
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in4>;
 					};
 				};
 			};
 		};
 
-		funnel@4983000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04983000 0x0 0x1000>;
+		cti@4b13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b13000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					turing2_funnel_in0: endpoint {
-						remote-endpoint = <&turing2_tpdm_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					turing2_funnel_out0: endpoint {
-						remote-endpoint = <&gdsp_tpda_in5>;
-					};
-				};
-			};
 		};
 
-		tpdm@4ac0000 {
+		tpdm@4b80000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04ac0000 0x0 0x1000>;
+			reg = <0x0 0x04b80000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1293,69 +2963,72 @@
 
 			out-ports {
 				port {
-					dlmm_tpdm0_out: endpoint {
-						remote-endpoint = <&dlmm_tpda_in27>;
+					turing0_tpdm0_out: endpoint {
+						remote-endpoint = <&turing0_tpda_in0>;
 					};
 				};
 			};
 		};
 
-		tpda@4ac4000 {
+		tpda@4b86000 {
 			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04ac4000 0x0 0x1000>;
+			reg = <0x0 0x04b86000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@1b {
-					reg = <27>;
-
-					dlmm_tpda_in27: endpoint {
-						remote-endpoint = <&dlmm_tpdm0_out>;
+				port {
+					turing0_tpda_in0: endpoint {
+						remote-endpoint = <&turing0_tpdm0_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					dlmm_tpda_out: endpoint {
-						remote-endpoint = <&dlmm_funnel_in0>;
+					turing0_tpda_out: endpoint {
+						remote-endpoint = <&turing0_funnel_in0>;
 					};
 				};
 			};
 		};
 
-		funnel@4ac5000 {
+		funnel@4b87000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04ac5000 0x0 0x1000>;
+			reg = <0x0 0x04b87000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			in-ports {
 				port {
-					dlmm_funnel_in0: endpoint {
-						remote-endpoint = <&dlmm_tpda_out>;
+					turing0_funnel_in0: endpoint {
+						remote-endpoint = <&turing0_tpda_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					dlmm_funnel_out: endpoint {
-						remote-endpoint = <&funnel1_in6>;
+					turing0_funnel_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in4>;
 					};
 				};
 			};
 		};
 
-		tpdm@4ad0000 {
+		cti@4b8b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b8b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@4c40000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04ad0000 0x0 0x1000>;
+			reg = <0x0 0x04c40000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1365,16 +3038,16 @@
 
 			out-ports {
 				port {
-					dlct0_tpdm0_out: endpoint {
-						remote-endpoint = <&dlct0_tpda_in26>;
+					gdsp_tpdm0_out: endpoint {
+						remote-endpoint = <&gdsp_tpda_in8>;
 					};
 				};
 			};
 		};
 
-		tpda@4ad3000 {
+		tpda@4c44000 {
 			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04ad3000 0x0 0x1000>;
+			reg = <0x0 0x04c44000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1383,43 +3056,35 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@13 {
-					reg = <19>;
-
-					dlct0_tpda_in19: endpoint {
-						remote-endpoint = <&prng_tpdm_out>;
-					};
-				};
-
-				port@19 {
-					reg = <25>;
+				port@5 {
+					reg = <5>;
 
-					dlct0_tpda_in25: endpoint {
-						remote-endpoint = <&pimem_tpdm_out>;
+					gdsp_tpda_in5: endpoint {
+						remote-endpoint = <&turing2_funnel_out0>;
 					};
 				};
 
-				port@1a {
-					reg = <26>;
+				port@8 {
+					reg = <8>;
 
-					dlct0_tpda_in26: endpoint {
-						remote-endpoint = <&dlct0_tpdm0_out>;
+					gdsp_tpda_in8: endpoint {
+						remote-endpoint = <&gdsp_tpdm0_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					dlct0_tpda_out: endpoint {
-						remote-endpoint = <&dlct0_funnel_in0>;
+					gdsp_tpda_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in0>;
 					};
 				};
 			};
 		};
 
-		funnel@4ad4000 {
+		funnel@4c45000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04ad4000 0x0 0x1000>;
+			reg = <0x0 0x04c45000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1431,122 +3096,125 @@
 				port@0 {
 					reg = <0>;
 
-					dlct0_funnel_in0: endpoint {
-						remote-endpoint = <&dlct0_tpda_out>;
+					gdsp_funnel_in0: endpoint {
+						remote-endpoint = <&gdsp_tpda_out>;
 					};
 				};
 
 				port@4 {
 					reg = <4>;
 
-					dlct0_funnel_in4: endpoint {
-						remote-endpoint = <&ddr_funnel5_out>;
+					gdsp_funnel_in4: endpoint {
+						remote-endpoint = <&turing0_funnel_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					dlct0_funnel_out: endpoint {
-						remote-endpoint = <&funnel1_in5>;
+					gdsp_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in6>;
 					};
 				};
 			};
 		};
 
-		funnel@4b04000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04b04000 0x0 0x1000>;
+		tpdm@4c50000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04c50000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@6 {
-					reg = <6>;
-
-					aoss_funnel_in6: endpoint {
-						remote-endpoint = <&aoss_tpda_out>;
-					};
-				};
-
-				port@7 {
-					reg = <7>;
-
-					aoss_funnel_in7: endpoint {
-						remote-endpoint = <&qdss_funnel_out>;
-					};
-				};
-			};
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					aoss_funnel_out: endpoint {
-						remote-endpoint = <&etf0_in>;
+					dlst_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_tpda_in8>;
 					};
 				};
 			};
 		};
 
-		tmc_etf: tmc@4b05000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x0 0x04b05000 0x0 0x1000>;
+		tpda@4c54000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04c54000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			in-ports {
-				port {
-					etf0_in: endpoint {
-						remote-endpoint = <&aoss_funnel_out>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_tpdm0_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					etf0_out: endpoint {
-						remote-endpoint = <&swao_rep_in>;
+					dlst_tpda_out: endpoint {
+						remote-endpoint = <&dlst_funnel_in0>;
 					};
 				};
 			};
 		};
 
-		replicator@4b06000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0x0 0x04b06000 0x0 0x1000>;
+		funnel@4c55000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04c55000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			in-ports {
 				port {
-					swao_rep_in: endpoint {
-						remote-endpoint = <&etf0_out>;
+					dlst_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in4>;
 					};
 				};
 			};
+		};
 
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
+		tpdm@4e00000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e00000 0x0 0x1000>;
 
-				port@1 {
-					reg = <1>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 
-					swao_rep_out1: endpoint {
-						remote-endpoint = <&eud_in>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm3_out: endpoint {
+						remote-endpoint = <&ddr_tpda_in4>;
 					};
 				};
 			};
 		};
 
-		tpda@4b08000 {
+		tpda@4e03000 {
 			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04b08000 0x0 0x1000>;
+			reg = <0x0 0x04e03000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1558,253 +3226,310 @@
 				port@0 {
 					reg = <0>;
 
-					aoss_tpda_in0: endpoint {
-						remote-endpoint = <&aoss_tpdm0_out>;
+					ddr_tpda_in0: endpoint {
+						remote-endpoint = <&ddr_funnel0_out0>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
 
-					aoss_tpda_in1: endpoint {
-						remote-endpoint = <&aoss_tpdm1_out>;
+					ddr_tpda_in1: endpoint {
+						remote-endpoint = <&ddr_funnel1_out0>;
 					};
 				};
 
-				port@2 {
-					reg = <2>;
+				port@4 {
+					reg = <4>;
 
-					aoss_tpda_in2: endpoint {
-						remote-endpoint = <&aoss_tpdm2_out>;
+					ddr_tpda_in4: endpoint {
+						remote-endpoint = <&ddr_tpdm3_out>;
 					};
 				};
+			};
 
-				port@3 {
-					reg = <3>;
-
-					aoss_tpda_in3: endpoint {
-						remote-endpoint = <&aoss_tpdm3_out>;
+			out-ports {
+				port {
+					ddr_tpda_out: endpoint {
+						remote-endpoint = <&ddr_funnel5_in0>;
 					};
 				};
+			};
+		};
 
-				port@4 {
-					reg = <4>;
+		funnel@4e04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e04000 0x0 0x1000>;
 
-					aoss_tpda_in4: endpoint {
-						remote-endpoint = <&aoss_tpdm4_out>;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel5_in0: endpoint {
+						remote-endpoint = <&ddr_tpda_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					aoss_tpda_out: endpoint {
-						remote-endpoint = <&aoss_funnel_in6>;
+					ddr_funnel5_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in4>;
 					};
 				};
 			};
 		};
 
-		tpdm@4b09000 {
+		tpdm@4e10000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b09000 0x0 0x1000>;
+			reg = <0x0 0x04e10000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					aoss_tpdm0_out: endpoint {
-						remote-endpoint = <&aoss_tpda_in0>;
+					ddr_tpdm0_out: endpoint {
+						remote-endpoint = <&ddr_funnel0_in0>;
 					};
 				};
 			};
 		};
 
-		tpdm@4b0a000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b0a000 0x0 0x1000>;
+		funnel@4e12000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e12000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
+			in-ports {
+				port {
+					ddr_funnel0_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm0_out>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-					aoss_tpdm1_out: endpoint {
-						remote-endpoint = <&aoss_tpda_in1>;
+					ddr_funnel0_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in0>;
 					};
 				};
 			};
 		};
 
-		tpdm@4b0b000 {
+		tpdm@4e20000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b0b000 0x0 0x1000>;
+			reg = <0x0 0x04e20000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					aoss_tpdm2_out: endpoint {
-						remote-endpoint = <&aoss_tpda_in2>;
+					ddr_tpdm1_out: endpoint {
+						remote-endpoint = <&ddr_funnel1_in0>;
 					};
 				};
 			};
 		};
 
-		tpdm@4b0c000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b0c000 0x0 0x1000>;
+		funnel@4e22000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e22000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
+			in-ports {
+				port {
+					ddr_funnel1_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm1_out>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-					aoss_tpdm3_out: endpoint {
-						remote-endpoint = <&aoss_tpda_in3>;
+					ddr_funnel1_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in1>;
 					};
 				};
 			};
 		};
 
-		tpdm@4b0d000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b0d000 0x0 0x1000>;
+		etm@6040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06040000 0x0 0x1000>;
+			cpu = <&cpu0>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
-					aoss_tpdm4_out: endpoint {
-						remote-endpoint = <&aoss_tpda_in4>;
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in0>;
 					};
 				};
 			};
 		};
 
-		cti@4b13000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x04b13000 0x0 0x1000>;
+		etm@6140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06140000 0x0 0x1000>;
+			cpu = <&cpu1>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in1>;
+					};
+				};
+			};
 		};
 
-		tpdm@4b80000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04b80000 0x0 0x1000>;
+		etm@6240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06240000 0x0 0x1000>;
+			cpu = <&cpu2>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
-					turing0_tpdm0_out: endpoint {
-						remote-endpoint = <&turing0_tpda_in0>;
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in2>;
 					};
 				};
 			};
 		};
 
-		tpda@4b86000 {
-			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04b86000 0x0 0x1000>;
+		etm@6340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06340000 0x0 0x1000>;
+			cpu = <&cpu3>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
-				port {
-					turing0_tpda_in0: endpoint {
-						remote-endpoint = <&turing0_tpdm0_out>;
-					};
-				};
-			};
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
-					turing0_tpda_out: endpoint {
-						remote-endpoint = <&turing0_funnel_in0>;
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in3>;
 					};
 				};
 			};
 		};
 
-		funnel@4b87000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04b87000 0x0 0x1000>;
+		etm@6440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06440000 0x0 0x1000>;
+			cpu = <&cpu4>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
 				port {
-					turing0_funnel_in0: endpoint {
-						remote-endpoint = <&turing0_tpda_out>;
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in4>;
 					};
 				};
 			};
+		};
+
+		etm@6540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
-					turing0_funnel_out: endpoint {
-						remote-endpoint = <&gdsp_funnel_in4>;
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in5>;
 					};
 				};
 			};
 		};
 
-		cti@4b8b000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x04b8b000 0x0 0x1000>;
+		etm@6640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06640000 0x0 0x1000>;
+			cpu = <&cpu6>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in6>;
+					};
+				};
+			};
 		};
 
-		tpdm@4c40000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04c40000 0x0 0x1000>;
+		etm@6740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06740000 0x0 0x1000>;
+			cpu = <&cpu7>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
-					gdsp_tpdm0_out: endpoint {
-						remote-endpoint = <&gdsp_tpda_in8>;
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in7>;
 					};
 				};
 			};
 		};
 
-		tpda@4c44000 {
-			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04c44000 0x0 0x1000>;
+		funnel@6800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06800000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1813,91 +3538,83 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@5 {
-					reg = <5>;
+				port@0 {
+					reg = <0>;
 
-					gdsp_tpda_in5: endpoint {
-						remote-endpoint = <&turing2_funnel_out0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
 					};
 				};
 
-				port@8 {
-					reg = <8>;
+				port@1 {
+					reg = <1>;
 
-					gdsp_tpda_in8: endpoint {
-						remote-endpoint = <&gdsp_tpdm0_out>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
 					};
 				};
-			};
 
-			out-ports {
-				port {
-					gdsp_tpda_out: endpoint {
-						remote-endpoint = <&gdsp_funnel_in0>;
+				port@2 {
+					reg = <2>;
+
+					apss_funnel0_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
 					};
 				};
-			};
-		};
-
-		funnel@4c45000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04c45000 0x0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port@3 {
+					reg = <3>;
 
-					gdsp_funnel_in0: endpoint {
-						remote-endpoint = <&gdsp_tpda_out>;
+					apss_funnel0_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
 					};
 				};
 
 				port@4 {
 					reg = <4>;
 
-					gdsp_funnel_in4: endpoint {
-						remote-endpoint = <&turing0_funnel_out>;
+					apss_funnel0_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
 					};
 				};
-			};
 
-			out-ports {
-				port {
-					gdsp_funnel_out: endpoint {
-						remote-endpoint = <&dlst_ch_funnel_in6>;
+				port@5 {
+					reg = <5>;
+
+					apss_funnel0_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
 					};
 				};
-			};
-		};
 
-		tpdm@4c50000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04c50000 0x0 0x1000>;
+				port@6 {
+					reg = <6>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+					apss_funnel0_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+				port@7 {
+					reg = <7>;
+
+					apss_funnel0_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-					dlst_tpdm0_out: endpoint {
-						remote-endpoint = <&dlst_tpda_in8>;
+					apss_funnel0_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in0>;
 					};
 				};
 			};
 		};
 
-		tpda@4c54000 {
-			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04c54000 0x0 0x1000>;
+		funnel@6810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06810000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1906,72 +3623,81 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@8 {
-					reg = <8>;
+				port@0 {
+					reg = <0>;
 
-					dlst_tpda_in8: endpoint {
-						remote-endpoint = <&dlst_tpdm0_out>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&apss_funnel0_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_funnel1_in3: endpoint {
+						remote-endpoint = <&apss_tpda_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					dlst_tpda_out: endpoint {
-						remote-endpoint = <&dlst_funnel_in0>;
+					apss_funnel1_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
 					};
 				};
 			};
 		};
 
-		funnel@4c55000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04c55000 0x0 0x1000>;
+		cti@682b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0682b000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+		};
 
-			in-ports {
-				port {
-					dlst_funnel_in0: endpoint {
-						remote-endpoint = <&dlst_tpda_out>;
-					};
-				};
-			};
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					dlst_funnel_out: endpoint {
-						remote-endpoint = <&dlst_ch_funnel_in4>;
+					apss_tpdm3_out: endpoint {
+						remote-endpoint = <&apss_tpda_in3>;
 					};
 				};
 			};
 		};
 
-		tpdm@4e00000 {
+		tpdm@6861000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04e00000 0x0 0x1000>;
+			reg = <0x0 0x06861000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
 			qcom,dsb-element-bits = <32>;
 			qcom,dsb-msrs-num = <32>;
-			qcom,cmb-element-bits = <32>;
-			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					ddr_tpdm3_out: endpoint {
-						remote-endpoint = <&ddr_tpda_in4>;
+					apss_tpdm4_out: endpoint {
+						remote-endpoint = <&apss_tpda_in4>;
 					};
 				};
 			};
 		};
 
-		tpda@4e03000 {
+		tpda@6863000 {
 			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x04e03000 0x0 0x1000>;
+			reg = <0x0 0x06863000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1983,1065 +3709,1267 @@
 				port@0 {
 					reg = <0>;
 
-					ddr_tpda_in0: endpoint {
-						remote-endpoint = <&ddr_funnel0_out0>;
+					apss_tpda_in0: endpoint {
+						remote-endpoint = <&apss_tpdm0_out>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
 
-					ddr_tpda_in1: endpoint {
-						remote-endpoint = <&ddr_funnel1_out0>;
-					};
-				};
-
-				port@4 {
-					reg = <4>;
-
-					ddr_tpda_in4: endpoint {
-						remote-endpoint = <&ddr_tpdm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					ddr_tpda_out: endpoint {
-						remote-endpoint = <&ddr_funnel5_in0>;
+					apss_tpda_in1: endpoint {
+						remote-endpoint = <&apss_tpdm1_out>;
 					};
 				};
-			};
-		};
-
-		funnel@4e04000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04e04000 0x0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
 
-			in-ports {
-				port {
-					ddr_funnel5_in0: endpoint {
-						remote-endpoint = <&ddr_tpda_out>;
-					};
-				};
-			};
+				port@2 {
+					reg = <2>;
 
-			out-ports {
-				port {
-					ddr_funnel5_out: endpoint {
-						remote-endpoint = <&dlct0_funnel_in4>;
+					apss_tpda_in2: endpoint {
+						remote-endpoint = <&apss_tpdm2_out>;
 					};
 				};
-			};
-		};
-
-		tpdm@4e10000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04e10000 0x0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+				port@3 {
+					reg = <3>;
 
-			out-ports {
-				port {
-					ddr_tpdm0_out: endpoint {
-						remote-endpoint = <&ddr_funnel0_in0>;
+					apss_tpda_in3: endpoint {
+						remote-endpoint = <&apss_tpdm3_out>;
 					};
 				};
-			};
-		};
-
-		funnel@4e12000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04e12000 0x0 0x1000>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+				port@4 {
+					reg = <4>;
 
-			in-ports {
-				port {
-					ddr_funnel0_in0: endpoint {
-						remote-endpoint = <&ddr_tpdm0_out>;
+					apss_tpda_in4: endpoint {
+						remote-endpoint = <&apss_tpdm4_out>;
 					};
 				};
 			};
 
 			out-ports {
 				port {
-					ddr_funnel0_out0: endpoint {
-						remote-endpoint = <&ddr_tpda_in0>;
+					apss_tpda_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in3>;
 					};
 				};
 			};
 		};
 
-		tpdm@4e20000 {
+		tpdm@68a0000 {
 			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x04e20000 0x0 0x1000>;
+			reg = <0x0 0x068a0000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					ddr_tpdm1_out: endpoint {
-						remote-endpoint = <&ddr_funnel1_in0>;
+					apss_tpdm1_out: endpoint {
+						remote-endpoint = <&apss_tpda_in1>;
 					};
 				};
 			};
 		};
 
-		funnel@4e22000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x04e22000 0x0 0x1000>;
+		tpdm@68b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068b0000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			in-ports {
-				port {
-					ddr_funnel1_in0: endpoint {
-						remote-endpoint = <&ddr_tpdm1_out>;
-					};
-				};
-			};
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					ddr_funnel1_out0: endpoint {
-						remote-endpoint = <&ddr_tpda_in1>;
+					apss_tpdm0_out: endpoint {
+						remote-endpoint = <&apss_tpda_in0>;
 					};
 				};
 			};
 		};
 
-		etm@6040000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06040000 0x0 0x1000>;
-			cpu = <&cpu0>;
+		tpdm@68c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068c0000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
 
 			out-ports {
 				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in0>;
+					apss_tpdm2_out: endpoint {
+						remote-endpoint = <&apss_tpda_in2>;
 					};
 				};
 			};
 		};
 
-		etm@6140000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06140000 0x0 0x1000>;
-			cpu = <&cpu1>;
+		cti@68e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068e0000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+		};
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+		cti@68f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068f0000 0x0 0x1000>;
 
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in1>;
-					};
-				};
-			};
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
 		};
 
-		etm@6240000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06240000 0x0 0x1000>;
-			cpu = <&cpu2>;
+		cti@6900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06900000 0x0 0x1000>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+		};
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+		usb_1_hsphy: phy@8904000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08904000 0x0 0x400>;
 
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in2>;
-					};
-				};
-			};
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		etm@6340000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06340000 0x0 0x1000>;
-			cpu = <&cpu3>;
+		usb_2_hsphy: phy@8906000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08906000 0x0 0x400>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
 
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in3>;
-					};
-				};
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		etm@6440000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06440000 0x0 0x1000>;
-			cpu = <&cpu4>;
+		usb_qmpphy: phy@8907000 {
+			compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
+			reg = <0x0 0x08907000 0x0 0x2000>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
 
-			out-ports {
-				port {
-					etm4_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in4>;
-					};
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		serdes0: phy@8909000 {
+			compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08909000 0x0 0x00000e10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,qcs8300-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x3da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x9091000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2601000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <7984000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <12195000>;
 				};
 			};
 		};
 
-		etm@6540000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06540000 0x0 0x1000>;
-			cpu = <&cpu5>;
+		pmu@90b5400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b5400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <9155000>;
+				};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+				opp-1 {
+					opp-peak-kBps = <12298000>;
+				};
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+				opp-2 {
+					opp-peak-kBps = <14236000>;
+				};
 
-			out-ports {
-				port {
-					etm5_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in5>;
-					};
+				opp-3 {
+					opp-peak-kBps = <16265000>;
 				};
 			};
 		};
 
-		etm@6640000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06640000 0x0 0x1000>;
-			cpu = <&cpu6>;
+		pmu@90b6400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b6400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+		dc_noc: interconnect@90e0000 {
+			compatible = "qcom,qcs8300-dc-noc";
+			reg = <0x0 0x090e0000 0x0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 
-			out-ports {
-				port {
-					etm6_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in6>;
-					};
-				};
-			};
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,qcs8300-gem-noc";
+			reg = <0x0 0x9100000 0x0 0xf7080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		etm@6740000 {
-			compatible = "arm,primecell";
-			reg = <0x0 0x06740000 0x0 0x1000>;
-			cpu = <&cpu7>;
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,qcs8300-llcc";
+			reg = <0x0 0x09200000 0x0 0x80000>,
+			      <0x0 0x09300000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x80000>,
+			      <0x0 0x09500000 0x0 0x80000>,
+			      <0x0 0x09a00000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
 
-			arm,coresight-loses-context-with-cpu;
-			qcom,skip-power-up;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
 
-			out-ports {
-				port {
-					etm7_out: endpoint {
-						remote-endpoint = <&apss_funnel0_in7>;
-					};
-				};
-			};
-		};
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
 
-		funnel@6800000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x06800000 0x0 0x1000>;
+			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
 
-				port@0 {
-					reg = <0>;
+			wakeup-source;
 
-					apss_funnel0_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 
-				port@1 {
-					reg = <1>;
+			status = "disabled";
 
-					apss_funnel0_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xe000>;
+				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
 
-				port@2 {
-					reg = <2>;
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a4f8800 0x0 0x400>;
 
-					apss_funnel0_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
 
-				port@3 {
-					reg = <3>;
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
-					apss_funnel0_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
+			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
 
-				port@4 {
-					reg = <4>;
+			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
-					apss_funnel0_in4: endpoint {
-						remote-endpoint = <&etm4_out>;
-					};
-				};
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
 
-				port@5 {
-					reg = <5>;
+			interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
 
-					apss_funnel0_in5: endpoint {
-						remote-endpoint = <&etm5_out>;
-					};
-				};
+			qcom,select-utmi-as-pipe-clk;
+			wakeup-source;
 
-				port@6 {
-					reg = <6>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
 
-					apss_funnel0_in6: endpoint {
-						remote-endpoint = <&etm6_out>;
-					};
-				};
+			status = "disabled";
 
-				port@7 {
-					reg = <7>;
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a400000 0x0 0xe000>;
 
-					apss_funnel0_in7: endpoint {
-						remote-endpoint = <&etm7_out>;
-					};
-				};
-			};
+				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
 
-			out-ports {
-				port {
-					apss_funnel0_out: endpoint {
-						remote-endpoint = <&apss_funnel1_in0>;
-					};
-				};
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
-		funnel@6810000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x0 0x06810000 0x0 0x1000>;
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,qcs8300-videocc";
+			reg = <0x0 0x0abf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,qcs8300-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sa8775p-dispcc0";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <0>, <0>, <0>, <0>,
+				 <0>, <0>, <0>, <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
 
-				port@0 {
-					reg = <0>;
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs8300-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+		};
 
-					apss_funnel1_in0: endpoint {
-						remote-endpoint = <&apss_funnel0_out>;
-					};
-				};
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
 
-				port@3 {
-					reg = <3>;
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
 
-					apss_funnel1_in3: endpoint {
-						remote-endpoint = <&apss_tpda_out>;
-					};
-				};
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,qcs8300-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 134>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio17", "gpio18";
+				function = "qup0_se0";
 			};
 
-			out-ports {
-				port {
-					apss_funnel1_out: endpoint {
-						remote-endpoint = <&funnel1_in4>;
-					};
-				};
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio19", "gpio20";
+				function = "qup0_se1";
 			};
-		};
 
-		cti@682b000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x0682b000 0x0 0x1000>;
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio33", "gpio34";
+				function = "qup0_se2";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-		};
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio25", "gpio26";
+				function = "qup0_se3";
+			};
 
-		tpdm@6860000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x06860000 0x0 0x1000>;
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio29", "gpio30";
+				function = "qup0_se4";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio21", "gpio22";
+				function = "qup0_se5";
+			};
 
-			qcom,cmb-element-bits = <64>;
-			qcom,cmb-msrs-num = <32>;
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio80", "gpio81";
+				function = "qup0_se6";
+			};
 
-			out-ports {
-				port {
-					apss_tpdm3_out: endpoint {
-						remote-endpoint = <&apss_tpda_in3>;
-					};
-				};
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio37", "gpio38";
+				function = "qup1_se0";
 			};
-		};
 
-		tpdm@6861000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x06861000 0x0 0x1000>;
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio39", "gpio40";
+				function = "qup1_se1";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio84", "gpio85";
+				function = "qup1_se2";
+			};
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio41", "gpio42";
+				function = "qup1_se3";
+			};
 
-			out-ports {
-				port {
-					apss_tpdm4_out: endpoint {
-						remote-endpoint = <&apss_tpda_in4>;
-					};
-				};
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio45", "gpio46";
+				function = "qup1_se4";
 			};
-		};
 
-		tpda@6863000 {
-			compatible = "qcom,coresight-tpda", "arm,primecell";
-			reg = <0x0 0x06863000 0x0 0x1000>;
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio49", "gpio50";
+				function = "qup1_se5";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio89", "gpio90";
+				function = "qup1_se6";
+			};
 
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio91", "gpio92";
+				function = "qup1_se7";
+			};
 
-				port@0 {
-					reg = <0>;
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup2_se0";
+			};
 
-					apss_tpda_in0: endpoint {
-						remote-endpoint = <&apss_tpdm0_out>;
-					};
-				};
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio17", "gpio18", "gpio19";
+				function = "qup0_se0";
+			};
 
-				port@1 {
-					reg = <1>;
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
 
-					apss_tpda_in1: endpoint {
-						remote-endpoint = <&apss_tpdm1_out>;
-					};
-				};
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio20";
+				function = "gpio";
+			};
 
-				port@2 {
-					reg = <2>;
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio19", "gpio20", "gpio17";
+				function = "qup0_se1";
+			};
 
-					apss_tpda_in2: endpoint {
-						remote-endpoint = <&apss_tpdm2_out>;
-					};
-				};
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
 
-				port@3 {
-					reg = <3>;
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio18";
+				function = "gpio";
+			};
 
-					apss_tpda_in3: endpoint {
-						remote-endpoint = <&apss_tpdm3_out>;
-					};
-				};
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio33", "gpio34", "gpio35";
+				function = "qup0_se2";
+			};
 
-				port@4 {
-					reg = <4>;
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
 
-					apss_tpda_in4: endpoint {
-						remote-endpoint = <&apss_tpdm4_out>;
-					};
-				};
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio36";
+				function = "gpio";
 			};
 
-			out-ports {
-				port {
-					apss_tpda_out: endpoint {
-						remote-endpoint = <&apss_funnel1_in3>;
-					};
-				};
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup0_se3";
 			};
-		};
 
-		tpdm@68a0000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x068a0000 0x0 0x1000>;
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
 
-			qcom,cmb-element-bits = <32>;
-			qcom,cmb-msrs-num = <32>;
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio29", "gpio30", "gpio31";
+				function = "qup0_se4";
+			};
 
-			out-ports {
-				port {
-					apss_tpdm1_out: endpoint {
-						remote-endpoint = <&apss_tpda_in1>;
-					};
-				};
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio32";
+				function = "qup0_se4";
 			};
-		};
 
-		tpdm@68b0000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x068b0000 0x0 0x1000>;
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio32";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio21", "gpio22", "gpio23";
+				function = "qup0_se5";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio24";
+				function = "qup0_se5";
+			};
 
-			qcom,cmb-element-bits = <32>;
-			qcom,cmb-msrs-num = <32>;
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio24";
+				function = "gpio";
+			};
 
-			out-ports {
-				port {
-					apss_tpdm0_out: endpoint {
-						remote-endpoint = <&apss_tpda_in0>;
-					};
-				};
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup0_se6";
 			};
-		};
 
-		tpdm@68c0000 {
-			compatible = "qcom,coresight-tpdm", "arm,primecell";
-			reg = <0x0 0x068c0000 0x0 0x1000>;
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio83";
+				function = "gpio";
+			};
 
-			qcom,dsb-element-bits = <32>;
-			qcom,dsb-msrs-num = <32>;
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio37", "gpio38", "gpio39";
+				function = "qup1_se0";
+			};
 
-			out-ports {
-				port {
-					apss_tpdm2_out: endpoint {
-						remote-endpoint = <&apss_tpda_in2>;
-					};
-				};
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio40";
+				function = "qup1_se0";
 			};
-		};
 
-		cti@68e0000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x068e0000 0x0 0x1000>;
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio40";
+				function = "gpio";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-		};
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio39", "gpio40", "gpio37";
+				function = "qup1_se1";
+			};
 
-		cti@68f0000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x068f0000 0x0 0x1000>;
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-		};
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio38";
+				function = "gpio";
+			};
 
-		cti@6900000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0 0x06900000 0x0 0x1000>;
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup1_se2";
+			};
 
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-		};
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
 
-		usb_1_hsphy: phy@8904000 {
-			compatible = "qcom,qcs8300-usb-hs-phy",
-				     "qcom,usb-snps-hs-7nm-phy";
-			reg = <0x0 0x08904000 0x0 0x400>;
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio87";
+				function = "gpio";
+			};
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio45", "gpio46", "gpio47";
+				function = "qup1_se4";
+			};
 
-			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
 
-			#phy-cells = <0>;
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio48";
+				function = "gpio";
+			};
 
-			status = "disabled";
-		};
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "qup1_se5";
+			};
 
-		usb_2_hsphy: phy@8906000 {
-			compatible = "qcom,qcs8300-usb-hs-phy",
-				     "qcom,usb-snps-hs-7nm-phy";
-			reg = <0x0 0x08906000 0x0 0x400>;
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio52";
+				function = "gpio";
+			};
 
-			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio89", "gpio90", "gpio91";
+				function = "qup1_se6";
+			};
 
-			#phy-cells = <0>;
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
 
-			status = "disabled";
-		};
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio92";
+				function = "gpio";
+			};
 
-		usb_qmpphy: phy@8907000 {
-			compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
-			reg = <0x0 0x08907000 0x0 0x2000>;
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio91", "gpio92", "gpio89";
+				function = "qup1_se7";
+			};
 
-			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_CLKREF_EN>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-			clock-names = "aux",
-				      "ref",
-				      "com_aux",
-				      "pipe";
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
 
-			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
-			reset-names = "phy", "phy_phy";
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio90";
+				function = "gpio";
+			};
 
-			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup2_se0";
+			};
 
-			#clock-cells = <0>;
-			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio13";
+				function = "qup2_se0";
+			};
 
-			#phy-cells = <0>;
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
 
-			status = "disabled";
-		};
+			qup_uart0_cts: qup-uart0-cts-state {
+				pins = "gpio17";
+				function = "qup0_se0";
+			};
 
-		serdes0: phy@8909000 {
-			compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy";
-			reg = <0x0 0x08909000 0x0 0x00000e10>;
-			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
-			clock-names = "sgmi_ref";
-			#phy-cells = <0>;
-			status = "disabled";
-		};
+			qup_uart0_rts: qup-uart0-rts-state {
+				pins = "gpio18";
+				function = "qup0_se0";
+			};
 
-		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,qcs8300-gpucc";
-			reg = <0x0 0x03d90000 0x0 0xa000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio19";
+				function = "qup0_se0";
+			};
 
-		pmu@9091000 {
-			compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
-			reg = <0x0 0x9091000 0x0 0x1000>;
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
 
-			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+			qup_uart1_cts: qup-uart1-cts-state {
+				pins = "gpio19";
+				function = "qup0_se1";
+			};
 
-			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qup_uart1_rts: qup-uart1-rts-state {
+				pins = "gpio20";
+				function = "qup0_se1";
+			};
 
-			operating-points-v2 = <&llcc_bwmon_opp_table>;
+			qup_uart1_tx: qup-uart1-tx-state {
+				pins = "gpio17";
+				function = "qup0_se1";
+			};
 
-			llcc_bwmon_opp_table: opp-table {
-				compatible = "operating-points-v2";
+			qup_uart1_rx: qup-uart1-rx-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
 
-				opp-0 {
-					opp-peak-kBps = <762000>;
-				};
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio33";
+				function = "qup0_se2";
+			};
 
-				opp-1 {
-					opp-peak-kBps = <1720000>;
-				};
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio34";
+				function = "qup0_se2";
+			};
 
-				opp-2 {
-					opp-peak-kBps = <2086000>;
-				};
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio35";
+				function = "qup0_se2";
+			};
 
-				opp-3 {
-					opp-peak-kBps = <2601000>;
-				};
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
 
-				opp-4 {
-					opp-peak-kBps = <2929000>;
-				};
+			qup_uart3_cts: qup-uart3-cts-state {
+				pins = "gpio25";
+				function = "qup0_se3";
+			};
 
-				opp-5 {
-					opp-peak-kBps = <5931000>;
-				};
+			qup_uart3_rts: qup-uart3-rts-state {
+				pins = "gpio26";
+				function = "qup0_se3";
+			};
 
-				opp-6 {
-					opp-peak-kBps = <6515000>;
-				};
+			qup_uart3_tx: qup-uart3-tx-state {
+				pins = "gpio27";
+				function = "qup0_se3";
+			};
 
-				opp-7 {
-					opp-peak-kBps = <7984000>;
-				};
+			qup_uart3_rx: qup-uart3-rx-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
 
-				opp-8 {
-					opp-peak-kBps = <10437000>;
-				};
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio29";
+				function = "qup0_se4";
+			};
 
-				opp-9 {
-					opp-peak-kBps = <12195000>;
-				};
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio30";
+				function = "qup0_se4";
 			};
-		};
 
-		pmu@90b5400 {
-			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
-			reg = <0x0 0x90b5400 0x0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio31";
+				function = "qup0_se4";
+			};
 
-			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio32";
+				function = "qup0_se4";
+			};
 
-			cpu_bwmon_opp_table: opp-table {
-				compatible = "operating-points-v2";
+			qup_uart5_cts: qup-uart5-cts-state {
+				pins = "gpio21";
+				function = "qup0_se5";
+			};
 
-				opp-0 {
-					opp-peak-kBps = <9155000>;
-				};
+			qup_uart5_rts: qup-uart5-rts-state {
+				pins = "gpio22";
+				function = "qup0_se5";
+			};
 
-				opp-1 {
-					opp-peak-kBps = <12298000>;
-				};
+			qup_uart5_tx: qup-uart5-tx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
 
-				opp-2 {
-					opp-peak-kBps = <14236000>;
-				};
+			qup_uart5_rx: qup-uart5-rx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
 
-				opp-3 {
-					opp-peak-kBps = <16265000>;
-				};
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio80";
+				function = "qup0_se6";
 			};
-		};
 
-		pmu@90b6400 {
-			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
-			reg = <0x0 0x90b6400 0x0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio81";
+				function = "qup0_se6";
+			};
 
-			operating-points-v2 = <&cpu_bwmon_opp_table>;
-		};
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio82";
+				function = "qup0_se6";
+			};
 
-		dc_noc: interconnect@90e0000 {
-			compatible = "qcom,qcs8300-dc-noc";
-			reg = <0x0 0x090e0000 0x0 0x5080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
 
-		gem_noc: interconnect@9100000 {
-			compatible = "qcom,qcs8300-gem-noc";
-			reg = <0x0 0x9100000 0x0 0xf7080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio43";
+				function = "qup0_se7";
+			};
 
-		llcc: system-cache-controller@9200000 {
-			compatible = "qcom,qcs8300-llcc";
-			reg = <0x0 0x09200000 0x0 0x80000>,
-			      <0x0 0x09300000 0x0 0x80000>,
-			      <0x0 0x09400000 0x0 0x80000>,
-			      <0x0 0x09500000 0x0 0x80000>,
-			      <0x0 0x09a00000 0x0 0x80000>;
-			reg-names = "llcc0_base",
-				    "llcc1_base",
-				    "llcc2_base",
-				    "llcc3_base",
-				    "llcc_broadcast_base";
-			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-		};
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio44";
+				function = "qup0_se7";
+			};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			qup_uart8_cts: qup-uart8-cts-state {
+				pins = "gpio37";
+				function = "qup1_se0";
+			};
 
-			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
+			qup_uart8_rts: qup-uart8-rts-state {
+				pins = "gpio38";
+				function = "qup1_se0";
+			};
 
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
+			qup_uart8_tx: qup-uart8-tx-state {
+				pins = "gpio39";
+				function = "qup1_se0";
+			};
 
-			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
-					  "hs_phy_irq",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "ss_phy_irq";
+			qup_uart8_rx: qup-uart8-rx-state {
+				pins = "gpio40";
+				function = "qup1_se0";
+			};
 
-			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
+			qup_uart9_cts: qup-uart9-cts-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+			};
 
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "usb-ddr", "apps-usb";
+			qup_uart9_rts: qup-uart9-rts-state {
+				pins = "gpio40";
+				function = "qup1_se1";
+			};
 
-			wakeup-source;
+			qup_uart9_tx: qup-uart9-tx-state {
+				pins = "gpio37";
+				function = "qup1_se1";
+			};
 
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			qup_uart9_rx: qup-uart9-rx-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
 
-			status = "disabled";
+			qup_uart10_cts: qup-uart10-cts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
+			};
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xe000>;
-				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x80 0x0>;
-				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
+			qup_uart10_rts: qup-uart10-rts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
 			};
-		};
 
-		usb_2: usb@a4f8800 {
-			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a4f8800 0x0 0x400>;
+			qup_uart10_tx: qup-uart10-tx-state {
+				pins = "gpio85";
+				function = "qup1_se2";
+			};
 
-			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB20_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB20_SLEEP_CLK>,
-				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
+			qup_uart10_rx: qup-uart10-rx-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
 
-			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB20_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>;
+			qup_uart11_tx: qup-uart11-tx-state {
+				pins = "gpio41";
+				function = "qup1_se3";
+			};
 
-			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
-					  "hs_phy_irq",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq";
+			qup_uart11_rx: qup-uart11-rx-state {
+				pins = "gpio42";
+				function = "qup1_se3";
+			};
 
-			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
+			qup_uart12_cts: qup-uart12-cts-state {
+				pins = "gpio45";
+				function = "qup1_se4";
+			};
 
-			resets = <&gcc GCC_USB20_PRIM_BCR>;
+			qup_uart12_rts: qup-uart12-rts-state {
+				pins = "gpio46";
+				function = "qup1_se4";
+			};
 
-			interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "usb-ddr", "apps-usb";
+			qup_uart12_tx: qup-uart12-tx-state {
+				pins = "gpio47";
+				function = "qup1_se4";
+			};
 
-			qcom,select-utmi-as-pipe-clk;
-			wakeup-source;
+			qup_uart12_rx: qup-uart12-rx-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
 
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			qup_uart13_cts: qup-uart13-cts-state {
+				pins = "gpio49";
+				function = "qup1_se5";
+			};
 
-			status = "disabled";
+			qup_uart13_rts: qup-uart13-rts-state {
+				pins = "gpio50";
+				function = "qup1_se5";
+			};
 
-			usb_2_dwc3: usb@a400000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a400000 0x0 0xe000>;
+			qup_uart13_tx: qup-uart13-tx-state {
+				pins = "gpio51";
+				function = "qup1_se5";
+			};
 
-				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x20 0x0>;
+			qup_uart13_rx: qup-uart13-rx-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
 
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
+			qup_uart14_cts: qup-uart14-cts-state {
+				pins = "gpio89";
+				function = "qup1_se6";
+			};
 
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				snps,dis_enblslpm_quirk;
+			qup_uart14_rts: qup-uart14-rts-state {
+				pins = "gpio90";
+				function = "qup1_se6";
 			};
-		};
 
-		videocc: clock-controller@abf0000 {
-			compatible = "qcom,qcs8300-videocc";
-			reg = <0x0 0x0abf0000 0x0 0x10000>;
-			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>,
-				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
+			qup_uart14_tx: qup-uart14-tx-state {
+				pins = "gpio91";
+				function = "qup1_se6";
+			};
 
-		camcc: clock-controller@ade0000 {
-			compatible = "qcom,qcs8300-camcc";
-			reg = <0x0 0x0ade0000 0x0 0x20000>;
-			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>,
-				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
+			qup_uart14_rx: qup-uart14-rx-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
 
-		dispcc: clock-controller@af00000 {
-			compatible = "qcom,sa8775p-dispcc0";
-			reg = <0x0 0x0af00000 0x0 0x20000>;
-			clocks = <&gcc GCC_DISP_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>,
-				 <&sleep_clk>,
-				 <0>, <0>, <0>, <0>,
-				 <0>, <0>, <0>, <0>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
+			qup_uart15_cts: qup-uart15-cts-state {
+				pins = "gpio91";
+				function = "qup1_se7";
+			};
 
-		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,qcs8300-pdc", "qcom,pdc";
-			reg = <0x0 0xb220000 0x0 0x30000>,
-			      <0x0 0x17c000f0 0x0 0x64>;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			qcom,pdc-ranges = <0 480 40>,
-					  <40 140 14>,
-					  <54 263 1>,
-					  <55 306 4>,
-					  <59 312 3>,
-					  <62 374 2>,
-					  <64 434 2>,
-					  <66 438 2>,
-					  <70 520 1>,
-					  <73 523 1>,
-					  <118 568 6>,
-					  <124 609 3>,
-					  <159 638 1>,
-					  <160 720 3>,
-					  <169 728 30>,
-					  <199 416 2>,
-					  <201 449 1>,
-					  <202 89 1>,
-					  <203 451 1>,
-					  <204 462 1>,
-					  <205 264 1>,
-					  <206 579 1>,
-					  <207 653 1>,
-					  <208 656 1>,
-					  <209 659 1>,
-					  <210 122 1>,
-					  <211 699 1>,
-					  <212 705 1>,
-					  <213 450 1>,
-					  <214 643 2>,
-					  <216 646 5>,
-					  <221 390 5>,
-					  <226 700 2>,
-					  <228 440 1>,
-					  <229 663 1>,
-					  <230 524 2>,
-					  <232 612 3>,
-					  <235 723 5>;
-		};
+			qup_uart15_rts: qup-uart15-rts-state {
+				pins = "gpio92";
+				function = "qup1_se7";
+			};
 
-		aoss_qmp: power-management@c300000 {
-			compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x400>;
-			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
-					       IPCC_MPROC_SIGNAL_GLINK_QMP
-					       IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-			#clock-cells = <0>;
-		};
+			qup_uart15_tx: qup-uart15-tx-state {
+				pins = "gpio89";
+				function = "qup1_se7";
+			};
 
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,qcs8300-tlmm";
-			reg = <0x0 0x0f100000 0x0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 134>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			wakeup-parent = <&pdc>;
+			qup_uart15_rx: qup-uart15-rx-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
 
-			qup_uart7_default: qup-uart7-state {
-				/* TX, RX */
-				pins = "gpio43", "gpio44";
-				function = "qup0_se7";
+			qup_uart16_cts: qup-uart16-cts-state {
+				pins = "gpio10";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rts: qup-uart16-rts-state {
+				pins = "gpio11";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_tx: qup-uart16-tx-state {
+				pins = "gpio12";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rx: qup-uart16-rx-state {
+				pins = "gpio13";
+				function = "qup2_se0";
 			};
 		};
 
@@ -3199,6 +5127,81 @@
 				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17a00000 0x0 0x10000>,
@@ -3359,6 +5362,28 @@
 			};
 		};
 
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>,
+			      <0x0 0x18594000 0x0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2";
+
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
 		remoteproc_gpdsp: remoteproc@20c00000 {
 			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
 			reg = <0x0 0x20c00000 0x0 0x10000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f973aa8f7477..846e5e5899aa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -47,7 +47,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_0>;
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -70,7 +70,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_100>;
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -88,7 +88,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_200>;
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -106,7 +106,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_300>;
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -1022,6 +1022,7 @@
 
 				iommus = <&apps_smmu 0xc0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 96701796c731..950443949247 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 		sdhc1 = &sdhc_1;
 		sdhc2 = &sdhc_2;
 	};
@@ -549,6 +550,66 @@
 };
 
 &tlmm {
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -584,6 +645,28 @@
 	};
 };
 
+&uart3 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3950-bt";
+
+		vddio-supply = <&pm4125_l15>;
+		vddxo-supply = <&pm4125_l13>;
+		vddrf-supply = <&pm4125_l10>;
+		vddch0-supply = <&pm4125_l22>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 /* UART connected to the Micro-USB port via a FTDI chip */
 &uart4 {
 	compatible = "qcom,geni-debug-uart";
@@ -620,7 +703,7 @@
 	vdd-1.8-xo-supply = <&pm4125_l13>;
 	vdd-1.3-rfa-supply = <&pm4125_l10>;
 	vdd-3.3-ch0-supply = <&pm4125_l22>;
-	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
+	qcom,calibration-variant = "Thundercomm_RB1";
 	firmware-name = "qcm2290";
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a16962f6aa1d..8cdb9dfa5d98 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -110,8 +110,6 @@
 		pinctrl-0 = <&lpi_i2s2_active>;
 		pinctrl-names = "default";
 		model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0";
-		audio-routing = "MM_DL1", "MultiMedia1 Playback",
-				"MM_DL2", "MultiMedia2 Playback";
 
 		mm1-dai-link {
 			link-name = "MultiMedia1";
@@ -749,7 +747,7 @@
 	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
-	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+	qcom,calibration-variant = "Thundercomm_RB2";
 	firmware-name = "qrb4210";
 
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
index ae256c713a36..5fe331923dd3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
@@ -9,17 +9,6 @@
 #include <dt-bindings/clock/qcom,camcc-sm8250.h>
 #include <dt-bindings/gpio/gpio.h>
 
-/ {
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-};
-
 &camcc {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index f694a6b28d77..698b6ef7b862 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1008,15 +1008,21 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+
+	dai@3 {
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 };
 
@@ -1032,6 +1038,12 @@
 	no-mmc;
 };
 
+&slpi {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,qrb5165-rb5-sndcard";
 	pinctrl-0 = <&tert_mi2s_active>;
@@ -1041,10 +1053,7 @@
 		"SpkrLeft IN", "WSA_SPK1 OUT",
 		"SpkrRight IN", "WSA_SPK2 OUT",
 		"VA DMIC0", "vdd-micb",
-		"VA DMIC1", "vdd-micb",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"VA DMIC1", "vdd-micb";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -1067,6 +1076,14 @@
 		};
 	};
 
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
 	hdmi-dai-link {
 		link-name = "HDMI Playback";
 		cpu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ac485291a979..e96fdcf3e9d0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -326,7 +326,6 @@
 
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii";
-	max-speed = <1000>;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8540p-ride.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index d0d6ab5f7e96..c8b36a447dd2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -155,7 +155,6 @@
 	snps,mtl-rx-config = <&ethernet0_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet0_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii-txid";
 
@@ -225,7 +224,6 @@
 
 	ethernet0_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -257,7 +255,6 @@
 	snps,mtl-rx-config = <&ethernet1_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet1_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-mode = "rgmii-txid";
 
 	pinctrl-names = "default";
@@ -302,7 +299,6 @@
 
 	ethernet1_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index 247cb9049c69..bfa9ee7622a3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -411,7 +411,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -480,7 +479,6 @@
 
 	mtl_tx_setup1: tx-queues-config {
 		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -510,15 +508,11 @@
 
 &i2c11 {
 	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c11_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
 &i2c18 {
 	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c18_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -665,6 +659,53 @@
 	status = "okay";
 };
 
+&qup_spi16_default {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c18_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart12_cts {
+	bias-disable;
+};
+
+&qup_uart12_rts {
+	bias-pull-down;
+};
+
+&qup_uart12_tx {
+	bias-pull-up;
+};
+
+&qup_uart12_rx {
+	bias-pull-down;
+};
+
+&qup_uart17_cts {
+	bias-disable;
+};
+
+&qup_uart17_rts {
+	bias-pull-down;
+};
+
+&qup_uart17_tx {
+	bias-pull-up;
+};
+
+&qup_uart17_rx {
+	bias-pull-down;
+};
+
 &serdes0 {
 	phy-supply = <&vreg_l5a>;
 	status = "okay";
@@ -680,8 +721,6 @@
 };
 
 &spi16 {
-	pinctrl-0 = <&qup_spi16_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -714,84 +753,6 @@
 		};
 	};
 
-	qup_uart10_default: qup-uart10-state {
-		pins = "gpio46", "gpio47";
-		function = "qup1_se3";
-	};
-
-	qup_spi16_default: qup-spi16-state {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		function = "qup2_se2";
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	qup_i2c11_default: qup-i2c11-state {
-		pins = "gpio48", "gpio49";
-		function = "qup1_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_i2c18_default: qup-i2c18-state {
-		pins = "gpio95", "gpio96";
-		function = "qup2_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_uart12_default: qup-uart12-state {
-		qup_uart12_cts: qup-uart12-cts-pins {
-			pins = "gpio52";
-			function = "qup1_se5";
-			bias-disable;
-		};
-
-		qup_uart12_rts: qup-uart12-rts-pins {
-			pins = "gpio53";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-
-		qup_uart12_tx: qup-uart12-tx-pins {
-			pins = "gpio54";
-			function = "qup1_se5";
-			bias-pull-up;
-		};
-
-		qup_uart12_rx: qup-uart12-rx-pins {
-			pins = "gpio55";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-	};
-
-	qup_uart17_default: qup-uart17-state {
-		qup_uart17_cts: qup-uart17-cts-pins {
-			pins = "gpio91";
-			function = "qup2_se3";
-			bias-disable;
-		};
-
-		qup_uart17_rts: qup0-uart17-rts-pins {
-			pins = "gpio92";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-
-		qup_uart17_tx: qup0-uart17-tx-pins {
-			pins = "gpio93";
-			function = "qup2_se3";
-			bias-pull-up;
-		};
-
-		qup_uart17_rx: qup0-uart17-rx-pins {
-			pins = "gpio94";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-	};
-
 	pcie0_default_state: pcie0-default-state {
 		perst-pins {
 			pins = "gpio2";
@@ -878,7 +839,7 @@
 		compatible = "pci17cb,1101";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		qcom,ath11k-calibration-variant = "QC_SA8775P_Ride";
+		qcom,calibration-variant = "QC_SA8775P_Ride";
 
 		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
 		vddaon-supply = <&vreg_pmu_aon_0p59>;
@@ -919,8 +880,6 @@
 
 &uart10 {
 	compatible = "qcom,geni-debug-uart";
-	pinctrl-0 = <&qup_uart10_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -937,6 +896,7 @@
 
 	bluetooth {
 		compatible = "qcom,wcn6855-bt";
+		firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
 
 		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
 		vddaon-supply = <&vreg_pmu_aon_0p59>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 3394ae2d1300..45f536633f64 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -471,17 +471,17 @@
 
 		cluster_0_pd: power-domain-cluster0 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_2_pd>;
 			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
 		};
 
 		cluster_1_pd: power-domain-cluster1 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_2_pd>;
 			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
 		};
 
-		cluster_2_pd: power-domain-cluster2 {
+		system_pd: power-domain-system {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&cluster_sleep_apss_rsc_pc>;
 		};
@@ -913,6 +913,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -938,6 +940,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -961,6 +965,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -978,6 +984,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1003,6 +1011,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1026,6 +1036,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1043,6 +1055,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1066,6 +1080,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1091,6 +1107,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1108,6 +1126,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1133,6 +1153,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1156,6 +1178,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1171,6 +1195,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1198,6 +1224,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1221,6 +1249,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1238,6 +1268,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1263,6 +1295,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1286,6 +1320,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1303,6 +1339,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1328,6 +1366,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1351,6 +1391,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1404,6 +1446,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1429,6 +1473,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1452,6 +1498,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1469,6 +1517,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1494,6 +1544,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1517,6 +1569,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1534,6 +1588,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1559,6 +1615,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1582,6 +1640,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1599,6 +1659,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1624,6 +1686,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1647,6 +1711,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1664,6 +1730,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1689,6 +1757,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1712,6 +1782,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1729,6 +1801,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1754,6 +1828,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1777,6 +1853,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1829,6 +1907,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c7_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1854,6 +1934,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi7_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1877,6 +1959,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1895,6 +1979,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1920,6 +2006,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1943,6 +2031,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_uart8_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1961,6 +2051,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1986,6 +2078,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2009,6 +2103,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2026,6 +2122,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2051,6 +2149,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2074,6 +2174,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-0 = <&qup_uart10_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
 						 &clk_virt SLAVE_QUP_CORE_1 0>,
@@ -2092,6 +2194,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2117,6 +2221,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi11_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2140,6 +2246,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-0 = <&qup_uart11_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -2158,6 +2266,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2183,6 +2293,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2206,6 +2318,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2223,6 +2337,8 @@
 				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2276,6 +2392,8 @@
 				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2301,6 +2419,8 @@
 				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2325,6 +2445,8 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				interconnect-names = "qup-core", "qup-config";
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2413,20 +2535,40 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x00>,
 				 <&apps_smmu 0x481 0x00>;
 		};
 
-		crypto: crypto@1dfa000 {
-			compatible = "qcom,sa8775p-qce", "qcom,qce";
-			reg = <0x0 0x01dfa000 0x0 0x6000>;
-			dmas = <&cryptobam 4>, <&cryptobam 5>;
-			dma-names = "rx", "tx";
-			iommus = <&apps_smmu 0x480 0x00>,
-				 <&apps_smmu 0x481 0x00>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "memory";
+		ctcu@4001000 {
+			compatible = "qcom,sa8775p-ctcu";
+			reg = <0x0 0x04001000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ctcu_in0: endpoint {
+						remote-endpoint = <&etr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ctcu_in1: endpoint {
+						remote-endpoint = <&etr1_out>;
+					};
+				};
+			};
 		};
 
 		stm: stm@4002000 {
@@ -2633,6 +2775,122 @@
 			};
 		};
 
+		replicator@4046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					qdss_rep_in: endpoint {
+						remote-endpoint = <&swao_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_rep_out0: endpoint {
+						remote-endpoint = <&etr_rep_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr: tmc@4048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04048000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04c0 0x00>;
+
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr0_in: endpoint {
+						remote-endpoint = <&etr_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr0_out: endpoint {
+						remote-endpoint = <&ctcu_in0>;
+					};
+				};
+			};
+		};
+
+		replicator@404e000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x0404e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_rep_in: endpoint {
+						remote-endpoint = <&qdss_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					etr_rep_out0: endpoint {
+						remote-endpoint = <&etr0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					etr_rep_out1: endpoint {
+						remote-endpoint = <&etr1_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr1: tmc@404f000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x0404f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04a0 0x40>;
+
+			arm,scatter-gather;
+			arm,buffer-size = <0x400000>;
+
+			in-ports {
+				port {
+					etr1_in: endpoint {
+						remote-endpoint = <&etr_rep_out1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr1_out: endpoint {
+						remote-endpoint = <&ctcu_in1>;
+					};
+				};
+			};
+		};
+
 		funnel@4b04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x0 0x4b04000 0x0 0x1000>;
@@ -2708,6 +2966,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					swao_rep_out0: endpoint {
+						remote-endpoint = <&qdss_rep_in>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
 					swao_rep_out1: endpoint {
@@ -3815,10 +4081,10 @@
 			reg-names = "mdss";
 
 			/* same path used twice */
-			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
-					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "mdp0-mem",
@@ -3848,7 +4114,7 @@
 			mdss0_mdp: display-controller@ae01000 {
 				compatible = "qcom,sa8775p-dpu";
 				reg = <0x0 0x0ae01000 0x0 0x8f000>,
-				      <0x0 0x0aeb0000 0x0 0x2008>;
+				      <0x0 0x0aeb0000 0x0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4268,6 +4534,634 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 149>;
 			wakeup-parent = <&pdc>;
+
+			qup_i2c0_default: qup-i2c0-state {
+				pins = "gpio20", "gpio21";
+				function = "qup0_se0";
+			};
+
+			qup_i2c1_default: qup-i2c1-state {
+				pins = "gpio24", "gpio25";
+				function = "qup0_se1";
+			};
+
+			qup_i2c2_default: qup-i2c2-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se2";
+			};
+
+			qup_i2c3_default: qup-i2c3-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0_se3";
+			};
+
+			qup_i2c4_default: qup-i2c4-state {
+				pins = "gpio32", "gpio33";
+				function = "qup0_se4";
+			};
+
+			qup_i2c5_default: qup-i2c5-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se5";
+			};
+
+			qup_i2c7_default: qup-i2c7-state {
+				pins = "gpio40", "gpio41";
+				function = "qup1_se0";
+			};
+
+			qup_i2c8_default: qup-i2c8-state {
+				pins = "gpio42", "gpio43";
+				function = "qup1_se1";
+			};
+
+			qup_i2c9_default: qup-i2c9-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se2";
+			};
+
+			qup_i2c10_default: qup-i2c10-state {
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+			};
+
+			qup_i2c11_default: qup-i2c11-state {
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+			};
+
+			qup_i2c12_default: qup-i2c12-state {
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+			};
+
+			qup_i2c13_default: qup-i2c13-state {
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+			};
+
+			qup_i2c14_default: qup-i2c14-state {
+				pins = "gpio80", "gpio81";
+				function = "qup2_se0";
+			};
+
+			qup_i2c15_default: qup-i2c15-state {
+				pins = "gpio84", "gpio85";
+				function = "qup2_se1";
+			};
+
+			qup_i2c16_default: qup-i2c16-state {
+				pins = "gpio86", "gpio87";
+				function = "qup2_se2";
+			};
+
+			qup_i2c17_default: qup-i2c17-state {
+				pins = "gpio91", "gpio92";
+				function = "qup2_se3";
+			};
+
+			qup_i2c18_default: qup-i2c18-state {
+				pins = "gpio95", "gpio96";
+				function = "qup2_se4";
+			};
+
+			qup_i2c19_default: qup-i2c19-state {
+				pins = "gpio99", "gpio100";
+				function = "qup2_se5";
+			};
+
+			qup_i2c20_default: qup-i2c20-state {
+				pins = "gpio97", "gpio98";
+				function = "qup2_se6";
+			};
+
+			qup_i2c21_default: qup-i2c21-state {
+				pins = "gpio13", "gpio14";
+				function = "qup3_se0";
+			};
+
+			qup_spi0_default: qup-spi0-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "qup0_se0";
+			};
+
+			qup_spi1_default: qup-spi1-state {
+				pins = "gpio24", "gpio25", "gpio26", "gpio27";
+				function = "qup0_se1";
+			};
+
+			qup_spi2_default: qup-spi2-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se2";
+			};
+
+			qup_spi3_default: qup-spi3-state {
+				pins = "gpio28", "gpio29", "gpio30", "gpio31";
+				function = "qup0_se3";
+			};
+
+			qup_spi4_default: qup-spi4-state {
+				pins = "gpio32", "gpio33", "gpio34", "gpio35";
+				function = "qup0_se4";
+			};
+
+			qup_spi5_default: qup-spi5-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se5";
+			};
+
+			qup_spi7_default: qup-spi7-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_default: qup-spi8-state {
+				pins = "gpio42", "gpio43", "gpio40", "gpio41";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_default: qup-spi9-state {
+				pins = "gpio46", "gpio47", "gpio44", "gpio45";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_default: qup-spi10-state {
+				pins = "gpio44", "gpio45", "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_spi11_default: qup-spi11-state {
+				pins = "gpio48", "gpio49", "gpio50", "gpio51";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_default: qup-spi12-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup1_se5";
+			};
+
+			qup_spi14_default: qup-spi14-state {
+				pins = "gpio80", "gpio81", "gpio82", "gpio83";
+				function = "qup2_se0";
+			};
+
+			qup_spi15_default: qup-spi15-state {
+				pins = "gpio84", "gpio85", "gpio99", "gpio100";
+				function = "qup2_se1";
+			};
+
+			qup_spi16_default: qup-spi16-state {
+				pins = "gpio86", "gpio87", "gpio88", "gpio89";
+				function = "qup2_se2";
+			};
+
+			qup_spi17_default: qup-spi17-state {
+				pins = "gpio91", "gpio92", "gpio93", "gpio94";
+				function = "qup2_se3";
+			};
+
+			qup_spi18_default: qup-spi18-state {
+				pins = "gpio95", "gpio96", "gpio97", "gpio98";
+				function = "qup2_se4";
+			};
+
+			qup_spi19_default: qup-spi19-state {
+				pins = "gpio99", "gpio100", "gpio84", "gpio85";
+				function = "qup2_se5";
+			};
+
+			qup_spi20_default: qup-spi20-state {
+				pins = "gpio97", "gpio98", "gpio95", "gpio96";
+				function = "qup2_se6";
+			};
+
+			qup_spi21_default: qup-spi21-state {
+				pins = "gpio13", "gpio14", "gpio15", "gpio16";
+				function = "qup3_se0";
+			};
+
+			qup_uart0_default: qup-uart0-state {
+				qup_uart0_cts: qup-uart0-cts-pins {
+					pins = "gpio20";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rts: qup-uart0-rts-pins {
+					pins = "gpio21";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_tx: qup-uart0-tx-pins {
+					pins = "gpio22";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rx: qup-uart0-rx-pins {
+					pins = "gpio23";
+					function = "qup0_se0";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-state {
+				qup_uart1_cts: qup-uart1-cts-pins {
+					pins = "gpio24";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rts: qup-uart1-rts-pins {
+					pins = "gpio25";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_tx: qup-uart1-tx-pins {
+					pins = "gpio26";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rx: qup-uart1-rx-pins {
+					pins = "gpio27";
+					function = "qup0_se1";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-state {
+				qup_uart2_cts: qup-uart2-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rts: qup-uart2-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_tx: qup-uart2-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rx: qup-uart2-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se2";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-state {
+				qup_uart3_cts: qup-uart3-cts-pins {
+					pins = "gpio28";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rts: qup-uart3-rts-pins {
+					pins = "gpio29";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_tx: qup-uart3-tx-pins {
+					pins = "gpio30";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rx: qup-uart3-rx-pins {
+					pins = "gpio31";
+					function = "qup0_se3";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-state {
+				qup_uart4_cts: qup-uart4-cts-pins {
+					pins = "gpio32";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rts: qup-uart4-rts-pins {
+					pins = "gpio33";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_tx: qup-uart4-tx-pins {
+					pins = "gpio34";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rx: qup-uart4-rx-pins {
+					pins = "gpio35";
+					function = "qup0_se4";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-state {
+				qup_uart5_cts: qup-uart5-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rts: qup-uart5-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_tx: qup-uart5-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rx: qup-uart5-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se5";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-state {
+				qup_uart7_cts: qup-uart7-cts-pins {
+					pins = "gpio40";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rts: qup-uart7-rts-pins {
+					pins = "gpio41";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_tx: qup-uart7-tx-pins {
+					pins = "gpio42";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rx: qup-uart7-rx-pins {
+					pins = "gpio43";
+					function = "qup1_se0";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-state {
+				qup_uart8_cts: qup-uart8-cts-pins {
+					pins = "gpio42";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rts: qup-uart8-rts-pins {
+					pins = "gpio43";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_tx: qup-uart8-tx-pins {
+					pins = "gpio40";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rx: qup-uart8-rx-pins {
+					pins = "gpio41";
+					function = "qup1_se1";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-state {
+				qup_uart9_cts: qup-uart9-cts-pins {
+					pins = "gpio46";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rts: qup-uart9-rts-pins {
+					pins = "gpio47";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_tx: qup-uart9-tx-pins {
+					pins = "gpio44";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rx: qup-uart9-rx-pins {
+					pins = "gpio45";
+					function = "qup1_se2";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_uart11_default: qup-uart11-state {
+				qup_uart11_cts: qup-uart11-cts-pins {
+					pins = "gpio48";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rts: qup-uart11-rts-pins {
+					pins = "gpio49";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_tx: qup-uart11-tx-pins {
+					pins = "gpio50";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rx: qup-uart11-rx-pins {
+					pins = "gpio51";
+					function = "qup1_se4";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-state {
+				qup_uart12_cts: qup-uart12-cts-pins {
+					pins = "gpio52";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rts: qup-uart12-rts-pins {
+					pins = "gpio53";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_tx: qup-uart12-tx-pins {
+					pins = "gpio54";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rx: qup-uart12-rx-pins {
+					pins = "gpio55";
+					function = "qup1_se5";
+				};
+			};
+
+			qup_uart14_default: qup-uart14-state {
+				qup_uart14_cts: qup-uart14-cts-pins {
+					pins = "gpio80";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rts: qup-uart14-rts-pins {
+					pins = "gpio81";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_tx: qup-uart14-tx-pins {
+					pins = "gpio82";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rx: qup-uart14-rx-pins {
+					pins = "gpio83";
+					function = "qup2_se0";
+				};
+			};
+
+			qup_uart15_default: qup-uart15-state {
+				qup_uart15_cts: qup-uart15-cts-pins {
+					pins = "gpio84";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rts: qup-uart15-rts-pins {
+					pins = "gpio85";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_tx: qup-uart15-tx-pins {
+					pins = "gpio99";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rx: qup-uart15-rx-pins {
+					pins = "gpio100";
+					function = "qup2_se1";
+				};
+			};
+
+			qup_uart16_default: qup-uart16-state {
+				qup_uart16_cts: qup-uart16-cts-pins {
+					pins = "gpio86";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rts: qup-uart16-rts-pins {
+					pins = "gpio87";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_tx: qup-uart16-tx-pins {
+					pins = "gpio88";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rx: qup-uart16-rx-pins {
+					pins = "gpio89";
+					function = "qup2_se2";
+				};
+			};
+
+			qup_uart17_default: qup-uart17-state {
+				qup_uart17_cts: qup-uart17-cts-pins {
+					pins = "gpio91";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rts: qup0-uart17-rts-pins {
+					pins = "gpio92";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_tx: qup0-uart17-tx-pins {
+					pins = "gpio93";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rx: qup0-uart17-rx-pins {
+					pins = "gpio94";
+					function = "qup2_se3";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-state {
+				qup_uart18_cts: qup-uart18-cts-pins {
+					pins = "gpio95";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rts: qup-uart18-rts-pins {
+					pins = "gpio96";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_tx: qup-uart18-tx-pins {
+					pins = "gpio97";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rx: qup-uart18-rx-pins {
+					pins = "gpio98";
+					function = "qup2_se4";
+				};
+			};
+
+			qup_uart19_default: qup-uart19-state {
+				qup_uart19_cts: qup-uart19-cts-pins {
+					pins = "gpio99";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rts: qup-uart19-rts-pins {
+					pins = "gpio100";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_tx: qup-uart19-tx-pins {
+					pins = "gpio84";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rx: qup-uart19-rx-pins {
+					pins = "gpio85";
+					function = "qup2_se5";
+				};
+			};
+
+			qup_uart20_default: qup-uart20-state {
+				qup_uart20_cts: qup-uart20-cts-pins {
+					pins = "gpio97";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rts: qup-uart20-rts-pins {
+					pins = "gpio98";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_tx: qup-uart20-tx-pins {
+					pins = "gpio95";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rx: qup-uart20-rx-pins {
+					pins = "gpio96";
+					function = "qup2_se6";
+				};
+			};
+
+			qup_uart21_default: qup-uart21-state {
+				qup_uart21_cts: qup-uart21-cts-pins {
+					pins = "gpio13";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rts: qup-uart21-rts-pins {
+					pins = "gpio14";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_tx: qup-uart21-tx-pins {
+					pins = "gpio15";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rx: qup-uart21-rx-pins {
+					pins = "gpio16";
+					function = "qup3_se0";
+				};
+			};
 		};
 
 		sram: sram@146d8000 {
@@ -4590,6 +5484,7 @@
 					  <WAKE_TCS 3>,
 					  <CONTROL_TCS 0>;
 			label = "apps_rsc";
+			power-domains = <&system_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -4660,6 +5555,10 @@
 			      <0x0 0x18593000 0x0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 
@@ -4903,15 +5802,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2141 0x04a0>,
-							 <&apps_smmu 0x2161 0x04a0>,
-							 <&apps_smmu 0x2181 0x0400>,
-							 <&apps_smmu 0x21c1 0x04a0>,
-							 <&apps_smmu 0x21e1 0x04a0>,
-							 <&apps_smmu 0x2541 0x04a0>,
-							 <&apps_smmu 0x2561 0x04a0>,
-							 <&apps_smmu 0x2581 0x0400>,
-							 <&apps_smmu 0x25c1 0x04a0>,
-							 <&apps_smmu 0x25e1 0x04a0>;
+							 <&apps_smmu 0x2181 0x0400>;
 						dma-coherent;
 					};
 
@@ -4919,15 +5810,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2142 0x04a0>,
-							 <&apps_smmu 0x2162 0x04a0>,
-							 <&apps_smmu 0x2182 0x0400>,
-							 <&apps_smmu 0x21c2 0x04a0>,
-							 <&apps_smmu 0x21e2 0x04a0>,
-							 <&apps_smmu 0x2542 0x04a0>,
-							 <&apps_smmu 0x2562 0x04a0>,
-							 <&apps_smmu 0x2582 0x0400>,
-							 <&apps_smmu 0x25c2 0x04a0>,
-							 <&apps_smmu 0x25e2 0x04a0>;
+							 <&apps_smmu 0x2182 0x0400>;
 						dma-coherent;
 					};
 
@@ -4935,15 +5818,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2143 0x04a0>,
-							 <&apps_smmu 0x2163 0x04a0>,
-							 <&apps_smmu 0x2183 0x0400>,
-							 <&apps_smmu 0x21c3 0x04a0>,
-							 <&apps_smmu 0x21e3 0x04a0>,
-							 <&apps_smmu 0x2543 0x04a0>,
-							 <&apps_smmu 0x2563 0x04a0>,
-							 <&apps_smmu 0x2583 0x0400>,
-							 <&apps_smmu 0x25c3 0x04a0>,
-							 <&apps_smmu 0x25e3 0x04a0>;
+							 <&apps_smmu 0x2183 0x0400>;
 						dma-coherent;
 					};
 
@@ -4951,15 +5826,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2144 0x04a0>,
-							 <&apps_smmu 0x2164 0x04a0>,
-							 <&apps_smmu 0x2184 0x0400>,
-							 <&apps_smmu 0x21c4 0x04a0>,
-							 <&apps_smmu 0x21e4 0x04a0>,
-							 <&apps_smmu 0x2544 0x04a0>,
-							 <&apps_smmu 0x2564 0x04a0>,
-							 <&apps_smmu 0x2584 0x0400>,
-							 <&apps_smmu 0x25c4 0x04a0>,
-							 <&apps_smmu 0x25e4 0x04a0>;
+							 <&apps_smmu 0x2184 0x0400>;
 						dma-coherent;
 					};
 
@@ -4967,15 +5834,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2145 0x04a0>,
-							 <&apps_smmu 0x2165 0x04a0>,
-							 <&apps_smmu 0x2185 0x0400>,
-							 <&apps_smmu 0x21c5 0x04a0>,
-							 <&apps_smmu 0x21e5 0x04a0>,
-							 <&apps_smmu 0x2545 0x04a0>,
-							 <&apps_smmu 0x2565 0x04a0>,
-							 <&apps_smmu 0x2585 0x0400>,
-							 <&apps_smmu 0x25c5 0x04a0>,
-							 <&apps_smmu 0x25e5 0x04a0>;
+							 <&apps_smmu 0x2185 0x0400>;
 						dma-coherent;
 					};
 
@@ -4983,15 +5842,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2146 0x04a0>,
-							 <&apps_smmu 0x2166 0x04a0>,
-							 <&apps_smmu 0x2186 0x0400>,
-							 <&apps_smmu 0x21c6 0x04a0>,
-							 <&apps_smmu 0x21e6 0x04a0>,
-							 <&apps_smmu 0x2546 0x04a0>,
-							 <&apps_smmu 0x2566 0x04a0>,
-							 <&apps_smmu 0x2586 0x0400>,
-							 <&apps_smmu 0x25c6 0x04a0>,
-							 <&apps_smmu 0x25e6 0x04a0>;
+							 <&apps_smmu 0x2186 0x0400>;
 						dma-coherent;
 					};
 
@@ -4999,15 +5850,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2147 0x04a0>,
-							 <&apps_smmu 0x2167 0x04a0>,
-							 <&apps_smmu 0x2187 0x0400>,
-							 <&apps_smmu 0x21c7 0x04a0>,
-							 <&apps_smmu 0x21e7 0x04a0>,
-							 <&apps_smmu 0x2547 0x04a0>,
-							 <&apps_smmu 0x2567 0x04a0>,
-							 <&apps_smmu 0x2587 0x0400>,
-							 <&apps_smmu 0x25c7 0x04a0>,
-							 <&apps_smmu 0x25e7 0x04a0>;
+							 <&apps_smmu 0x2187 0x0400>;
 						dma-coherent;
 					};
 
@@ -5015,15 +5858,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2148 0x04a0>,
-							 <&apps_smmu 0x2168 0x04a0>,
-							 <&apps_smmu 0x2188 0x0400>,
-							 <&apps_smmu 0x21c8 0x04a0>,
-							 <&apps_smmu 0x21e8 0x04a0>,
-							 <&apps_smmu 0x2548 0x04a0>,
-							 <&apps_smmu 0x2568 0x04a0>,
-							 <&apps_smmu 0x2588 0x0400>,
-							 <&apps_smmu 0x25c8 0x04a0>,
-							 <&apps_smmu 0x25e8 0x04a0>;
+							 <&apps_smmu 0x2188 0x0400>;
 						dma-coherent;
 					};
 
@@ -5031,31 +5866,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2149 0x04a0>,
-							 <&apps_smmu 0x2169 0x04a0>,
-							 <&apps_smmu 0x2189 0x0400>,
-							 <&apps_smmu 0x21c9 0x04a0>,
-							 <&apps_smmu 0x21e9 0x04a0>,
-							 <&apps_smmu 0x2549 0x04a0>,
-							 <&apps_smmu 0x2569 0x04a0>,
-							 <&apps_smmu 0x2589 0x0400>,
-							 <&apps_smmu 0x25c9 0x04a0>,
-							 <&apps_smmu 0x25e9 0x04a0>;
-						dma-coherent;
-					};
-
-					compute-cb@10 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <10>;
-						iommus = <&apps_smmu 0x214a 0x04a0>,
-							 <&apps_smmu 0x216a 0x04a0>,
-							 <&apps_smmu 0x218a 0x0400>,
-							 <&apps_smmu 0x21ca 0x04a0>,
-							 <&apps_smmu 0x21ea 0x04a0>,
-							 <&apps_smmu 0x254a 0x04a0>,
-							 <&apps_smmu 0x256a 0x04a0>,
-							 <&apps_smmu 0x258a 0x0400>,
-							 <&apps_smmu 0x25ca 0x04a0>,
-							 <&apps_smmu 0x25ea 0x04a0>;
+							 <&apps_smmu 0x2189 0x0400>;
 						dma-coherent;
 					};
 
@@ -5063,15 +5874,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x214b 0x04a0>,
-							 <&apps_smmu 0x216b 0x04a0>,
-							 <&apps_smmu 0x218b 0x0400>,
-							 <&apps_smmu 0x21cb 0x04a0>,
-							 <&apps_smmu 0x21eb 0x04a0>,
-							 <&apps_smmu 0x254b 0x04a0>,
-							 <&apps_smmu 0x256b 0x04a0>,
-							 <&apps_smmu 0x258b 0x0400>,
-							 <&apps_smmu 0x25cb 0x04a0>,
-							 <&apps_smmu 0x25eb 0x04a0>;
+							 <&apps_smmu 0x218b 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -5131,15 +5934,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2941 0x04a0>,
-							 <&apps_smmu 0x2961 0x04a0>,
-							 <&apps_smmu 0x2981 0x0400>,
-							 <&apps_smmu 0x29c1 0x04a0>,
-							 <&apps_smmu 0x29e1 0x04a0>,
-							 <&apps_smmu 0x2d41 0x04a0>,
-							 <&apps_smmu 0x2d61 0x04a0>,
-							 <&apps_smmu 0x2d81 0x0400>,
-							 <&apps_smmu 0x2dc1 0x04a0>,
-							 <&apps_smmu 0x2de1 0x04a0>;
+							 <&apps_smmu 0x2981 0x0400>;
 						dma-coherent;
 					};
 
@@ -5147,15 +5942,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2942 0x04a0>,
-							 <&apps_smmu 0x2962 0x04a0>,
-							 <&apps_smmu 0x2982 0x0400>,
-							 <&apps_smmu 0x29c2 0x04a0>,
-							 <&apps_smmu 0x29e2 0x04a0>,
-							 <&apps_smmu 0x2d42 0x04a0>,
-							 <&apps_smmu 0x2d62 0x04a0>,
-							 <&apps_smmu 0x2d82 0x0400>,
-							 <&apps_smmu 0x2dc2 0x04a0>,
-							 <&apps_smmu 0x2de2 0x04a0>;
+							 <&apps_smmu 0x2982 0x0400>;
 						dma-coherent;
 					};
 
@@ -5163,15 +5950,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2943 0x04a0>,
-							 <&apps_smmu 0x2963 0x04a0>,
-							 <&apps_smmu 0x2983 0x0400>,
-							 <&apps_smmu 0x29c3 0x04a0>,
-							 <&apps_smmu 0x29e3 0x04a0>,
-							 <&apps_smmu 0x2d43 0x04a0>,
-							 <&apps_smmu 0x2d63 0x04a0>,
-							 <&apps_smmu 0x2d83 0x0400>,
-							 <&apps_smmu 0x2dc3 0x04a0>,
-							 <&apps_smmu 0x2de3 0x04a0>;
+							 <&apps_smmu 0x2983 0x0400>;
 						dma-coherent;
 					};
 
@@ -5179,15 +5958,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2944 0x04a0>,
-							 <&apps_smmu 0x2964 0x04a0>,
-							 <&apps_smmu 0x2984 0x0400>,
-							 <&apps_smmu 0x29c4 0x04a0>,
-							 <&apps_smmu 0x29e4 0x04a0>,
-							 <&apps_smmu 0x2d44 0x04a0>,
-							 <&apps_smmu 0x2d64 0x04a0>,
-							 <&apps_smmu 0x2d84 0x0400>,
-							 <&apps_smmu 0x2dc4 0x04a0>,
-							 <&apps_smmu 0x2de4 0x04a0>;
+							 <&apps_smmu 0x2984 0x0400>;
 						dma-coherent;
 					};
 
@@ -5195,15 +5966,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2945 0x04a0>,
-							 <&apps_smmu 0x2965 0x04a0>,
-							 <&apps_smmu 0x2985 0x0400>,
-							 <&apps_smmu 0x29c5 0x04a0>,
-							 <&apps_smmu 0x29e5 0x04a0>,
-							 <&apps_smmu 0x2d45 0x04a0>,
-							 <&apps_smmu 0x2d65 0x04a0>,
-							 <&apps_smmu 0x2d85 0x0400>,
-							 <&apps_smmu 0x2dc5 0x04a0>,
-							 <&apps_smmu 0x2de5 0x04a0>;
+							 <&apps_smmu 0x2985 0x0400>;
 						dma-coherent;
 					};
 
@@ -5211,15 +5974,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2946 0x04a0>,
-							 <&apps_smmu 0x2966 0x04a0>,
-							 <&apps_smmu 0x2986 0x0400>,
-							 <&apps_smmu 0x29c6 0x04a0>,
-							 <&apps_smmu 0x29e6 0x04a0>,
-							 <&apps_smmu 0x2d46 0x04a0>,
-							 <&apps_smmu 0x2d66 0x04a0>,
-							 <&apps_smmu 0x2d86 0x0400>,
-							 <&apps_smmu 0x2dc6 0x04a0>,
-							 <&apps_smmu 0x2de6 0x04a0>;
+							 <&apps_smmu 0x2986 0x0400>;
 						dma-coherent;
 					};
 
@@ -5227,15 +5982,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2947 0x04a0>,
-							 <&apps_smmu 0x2967 0x04a0>,
-							 <&apps_smmu 0x2987 0x0400>,
-							 <&apps_smmu 0x29c7 0x04a0>,
-							 <&apps_smmu 0x29e7 0x04a0>,
-							 <&apps_smmu 0x2d47 0x04a0>,
-							 <&apps_smmu 0x2d67 0x04a0>,
-							 <&apps_smmu 0x2d87 0x0400>,
-							 <&apps_smmu 0x2dc7 0x04a0>,
-							 <&apps_smmu 0x2de7 0x04a0>;
+							 <&apps_smmu 0x2987 0x0400>;
 						dma-coherent;
 					};
 
@@ -5243,15 +5990,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2948 0x04a0>,
-							 <&apps_smmu 0x2968 0x04a0>,
-							 <&apps_smmu 0x2988 0x0400>,
-							 <&apps_smmu 0x29c8 0x04a0>,
-							 <&apps_smmu 0x29e8 0x04a0>,
-							 <&apps_smmu 0x2d48 0x04a0>,
-							 <&apps_smmu 0x2d68 0x04a0>,
-							 <&apps_smmu 0x2d88 0x0400>,
-							 <&apps_smmu 0x2dc8 0x04a0>,
-							 <&apps_smmu 0x2de8 0x04a0>;
+							 <&apps_smmu 0x2988 0x0400>;
 						dma-coherent;
 					};
 
@@ -5259,15 +5998,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2949 0x04a0>,
-							 <&apps_smmu 0x2969 0x04a0>,
-							 <&apps_smmu 0x2989 0x0400>,
-							 <&apps_smmu 0x29c9 0x04a0>,
-							 <&apps_smmu 0x29e9 0x04a0>,
-							 <&apps_smmu 0x2d49 0x04a0>,
-							 <&apps_smmu 0x2d69 0x04a0>,
-							 <&apps_smmu 0x2d89 0x0400>,
-							 <&apps_smmu 0x2dc9 0x04a0>,
-							 <&apps_smmu 0x2de9 0x04a0>;
+							 <&apps_smmu 0x2989 0x0400>;
 						dma-coherent;
 					};
 
@@ -5275,15 +6006,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <10>;
 						iommus = <&apps_smmu 0x294a 0x04a0>,
-							 <&apps_smmu 0x296a 0x04a0>,
-							 <&apps_smmu 0x298a 0x0400>,
-							 <&apps_smmu 0x29ca 0x04a0>,
-							 <&apps_smmu 0x29ea 0x04a0>,
-							 <&apps_smmu 0x2d4a 0x04a0>,
-							 <&apps_smmu 0x2d6a 0x04a0>,
-							 <&apps_smmu 0x2d8a 0x0400>,
-							 <&apps_smmu 0x2dca 0x04a0>,
-							 <&apps_smmu 0x2dea 0x04a0>;
+							 <&apps_smmu 0x298a 0x0400>;
 						dma-coherent;
 					};
 
@@ -5291,15 +6014,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x294b 0x04a0>,
-							 <&apps_smmu 0x296b 0x04a0>,
-							 <&apps_smmu 0x298b 0x0400>,
-							 <&apps_smmu 0x29cb 0x04a0>,
-							 <&apps_smmu 0x29eb 0x04a0>,
-							 <&apps_smmu 0x2d4b 0x04a0>,
-							 <&apps_smmu 0x2d6b 0x04a0>,
-							 <&apps_smmu 0x2d8b 0x0400>,
-							 <&apps_smmu 0x2dcb 0x04a0>,
-							 <&apps_smmu 0x2deb 0x04a0>;
+							 <&apps_smmu 0x298b 0x0400>;
 						dma-coherent;
 					};
 
@@ -5307,15 +6022,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 						iommus = <&apps_smmu 0x294c 0x04a0>,
-							 <&apps_smmu 0x296c 0x04a0>,
-							 <&apps_smmu 0x298c 0x0400>,
-							 <&apps_smmu 0x29cc 0x04a0>,
-							 <&apps_smmu 0x29ec 0x04a0>,
-							 <&apps_smmu 0x2d4c 0x04a0>,
-							 <&apps_smmu 0x2d6c 0x04a0>,
-							 <&apps_smmu 0x2d8c 0x0400>,
-							 <&apps_smmu 0x2dcc 0x04a0>,
-							 <&apps_smmu 0x2dec 0x04a0>;
+							 <&apps_smmu 0x298c 0x0400>;
 						dma-coherent;
 					};
 
@@ -5323,15 +6030,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 						iommus = <&apps_smmu 0x294d 0x04a0>,
-							 <&apps_smmu 0x296d 0x04a0>,
-							 <&apps_smmu 0x298d 0x0400>,
-							 <&apps_smmu 0x29Cd 0x04a0>,
-							 <&apps_smmu 0x29ed 0x04a0>,
-							 <&apps_smmu 0x2d4d 0x04a0>,
-							 <&apps_smmu 0x2d6d 0x04a0>,
-							 <&apps_smmu 0x2d8d 0x0400>,
-							 <&apps_smmu 0x2dcd 0x04a0>,
-							 <&apps_smmu 0x2ded 0x04a0>;
+							 <&apps_smmu 0x298d 0x0400>;
 						dma-coherent;
 					};
 				};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sar2130p.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index dd832e6816be..b0e342810ae7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sar2130p-gcc.h>
 #include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
@@ -1474,6 +1475,67 @@
 			};
 		};
 
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sar2130p-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x2000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi",
+				      "cnoc_sf_axi",
+				      "qmip_pcie_ahb";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+			iommus = <&apps_smmu 0x1e00 0x1>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
 			reg = <0x0 0x01c0e000 0x0 0x2000>;
@@ -1854,6 +1916,7 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -1951,6 +2014,398 @@
 			};
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sar2130p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
+
+			iommus = <&apps_smmu 0x2000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sar2130p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sar2130p-dp",
+					     "qcom,sm8350-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0xc00>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae95000 0x0 0x200>,
+				      <0x0 0x0ae95200 0x0 0x280>,
+				      <0x0 0x0ae95500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae97000 0x0 0x200>,
+				      <0x0 0x0ae97200 0x0 0x280>,
+				      <0x0 0x0ae97500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sar2130p-dispcc";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sar2130p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index eef3be624fb8..decae799d850 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -530,19 +530,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-el2.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
new file mode 100644
index 000000000000..49a98676ca4d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc7180 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu {
+	zap-shader {
+		status = "disabled";
+	};
+};
+
+/* Venus can be used in EL2 if booted similarly to ChromeOS devices. */
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index f57976906d63..8fee8d7a7d4c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -188,7 +188,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
+	qcom,calibration-variant = "GO_HOMESTAR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index 655bea928e52..26514640a1ae 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -79,7 +79,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+	qcom,calibration-variant = "GO_KINGOFTOWN";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index c3fd6760de7a..eb9c9e713a89 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -69,7 +69,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_LAZOR";
+	qcom,calibration-variant = "GO_LAZOR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index 89034b6702f4..a2224de841b1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -59,5 +59,5 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
+	qcom,calibration-variant = "GO_PAZQUEL360";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index f7300ffbb451..4f5ab378cf8e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -181,7 +181,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_POMPOM";
+	qcom,calibration-variant = "GO_POMPOM";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index d4925be3b1fc..17908c936520 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -196,7 +196,7 @@
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+	qcom,calibration-variant = "GO_WORMDINGLER";
 };
 
 /*
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 87c432c12a24..01e727b021ec 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
@@ -3195,7 +3196,7 @@
 			mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7180-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3284,8 +3285,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7180_CX>;
@@ -3433,8 +3436,8 @@
 			reg = <0 0x0af00000 0 0x200000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3720,7 +3723,7 @@
 		};
 
 		apps_rsc: rsc@18200000 {
-			compatible = "qcom,rpmh-rsc";
+			compatible = "qcom,sc7180-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			reg = <0 0x18200000 0 0x10000>,
 			      <0 0x18210000 0 0x10000>,
 			      <0 0x18220000 0 0x10000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
index a90c70b1b73e..0e07429982bd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -139,6 +139,7 @@ hp_i2c: &i2c2 {
 	vdd-micb-supply = <&pp1800_l2c>;
 	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
 			<&lpass_dmic23_data>;
+	pinctrl-names = "default";
 
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 020ef666e35f..ce48e4cda170 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -141,6 +141,9 @@
 };
 
 &lpass_va_macro {
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7370aa0dbf0e..90e5b9ab5b84 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -412,6 +412,8 @@
 &lpass_va_macro {
 	status = "okay";
 	vdd-micb-supply = <&vreg_bob>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
 };
 
 &pcie1 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0f2caf36910b..b1cc3bc1aec8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -6,6 +6,7 @@
  */
 #include <dt-bindings/clock/qcom,camcc-sc7280.h>
 #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
 #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
@@ -27,6 +28,7 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -2363,18 +2365,52 @@
 				      "tx_lane0_sync_clk",
 				      "rx_lane0_sync_clk",
 				      "rx_lane1_sync_clk";
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
+
 			qcom,ice = <&ice>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
@@ -2617,9 +2653,6 @@
 			compatible = "qcom,sc7280-lpass-va-macro";
 			reg = <0 0x03370000 0 0x1000>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
-
 			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
 			clock-names = "mclk";
 
@@ -3639,6 +3672,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3654,6 +3689,7 @@
 					reg = <1>;
 
 					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -3661,6 +3697,7 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
@@ -3832,15 +3869,15 @@
 							iommus = <&apps_smmu 0x1801 0x0>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 							};
 
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 							};
 
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 							};
 						};
 					};
@@ -3869,18 +3906,21 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x1803 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x1804 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x1805 0x0>;
+						dma-coherent;
 					};
 				};
 			};
@@ -4108,6 +4148,7 @@
 						reg = <1>;
 						iommus = <&apps_smmu 0x11a1 0x0420>,
 							 <&apps_smmu 0x1181 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@2 {
@@ -4115,6 +4156,7 @@
 						reg = <2>;
 						iommus = <&apps_smmu 0x11a2 0x0420>,
 							 <&apps_smmu 0x1182 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@3 {
@@ -4122,6 +4164,7 @@
 						reg = <3>;
 						iommus = <&apps_smmu 0x11a3 0x0420>,
 							 <&apps_smmu 0x1183 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4129,6 +4172,7 @@
 						reg = <4>;
 						iommus = <&apps_smmu 0x11a4 0x0420>,
 							 <&apps_smmu 0x1184 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4136,6 +4180,7 @@
 						reg = <5>;
 						iommus = <&apps_smmu 0x11a5 0x0420>,
 							 <&apps_smmu 0x1185 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4143,6 +4188,7 @@
 						reg = <6>;
 						iommus = <&apps_smmu 0x11a6 0x0420>,
 							 <&apps_smmu 0x1186 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4150,6 +4196,7 @@
 						reg = <7>;
 						iommus = <&apps_smmu 0x11a7 0x0420>,
 							 <&apps_smmu 0x1187 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@8 {
@@ -4157,6 +4204,7 @@
 						reg = <8>;
 						iommus = <&apps_smmu 0x11a8 0x0420>,
 							 <&apps_smmu 0x1188 0x0420>;
+						dma-coherent;
 					};
 
 					/* note: secure cb9 in downstream */
@@ -4166,6 +4214,7 @@
 						reg = <11>;
 						iommus = <&apps_smmu 0x11ab 0x0420>,
 							 <&apps_smmu 0x118b 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@12 {
@@ -4173,6 +4222,7 @@
 						reg = <12>;
 						iommus = <&apps_smmu 0x11ac 0x0420>,
 							 <&apps_smmu 0x118c 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@13 {
@@ -4180,6 +4230,7 @@
 						reg = <13>;
 						iommus = <&apps_smmu 0x11ad 0x0420>,
 							 <&apps_smmu 0x118d 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@14 {
@@ -4187,6 +4238,7 @@
 						reg = <14>;
 						iommus = <&apps_smmu 0x11ae 0x0420>,
 							 <&apps_smmu 0x118e 0x0420>;
+						dma-coherent;
 					};
 				};
 			};
@@ -4267,6 +4319,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -4301,14 +4354,6 @@
 
 			status = "disabled";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4430,6 +4475,184 @@
 			};
 		};
 
+		camss: isp@acb3000 {
+			compatible = "qcom,sc7280-camss";
+
+			reg = <0x0 0x0acb3000 0x0 0x1000>,
+			      <0x0 0x0acba000 0x0 0x1000>,
+			      <0x0 0x0acc1000 0x0 0x1000>,
+			      <0x0 0x0acc8000 0x0 0x1000>,
+			      <0x0 0x0accf000 0x0 0x1000>,
+			      <0x0 0x0ace0000 0x0 0x2000>,
+			      <0x0 0x0ace2000 0x0 0x2000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>,
+			      <0x0 0x0acaf000 0x0 0x4000>,
+			      <0x0 0x0acb6000 0x0 0x4000>,
+			      <0x0 0x0acbd000 0x0 0x4000>,
+			      <0x0 0x0acc4000 0x0 0x4000>,
+			      <0x0 0x0accb000 0x0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_2_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2",
+				      "vfe2_axi",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc  MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF  QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x800 0x4e0>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -4447,8 +4670,8 @@
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi_phy 0>,
-				 <&mdss_dsi_phy 1>,
+				 <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
@@ -4502,7 +4725,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7280-dpu";
 				reg = <0 0x0ae01000 0 0x8f030>,
-					<0 0x0aeb0000 0 0x2008>;
+					<0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4605,8 +4828,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
@@ -4820,7 +5045,9 @@
 
 					port@1 {
 						reg = <1>;
-						mdss_dp_out: endpoint { };
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
 					};
 				};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 28693a3bfc7f..b84e47a461a0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -2976,7 +2977,7 @@
 			mdss_mdp: mdp@ae01000 {
 				compatible = "qcom,sc8180x-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3465,10 +3466,10 @@
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&edp_phy 0>,
@@ -3524,7 +3525,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index bc9c5ca16270..74256d088f84 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -37,6 +37,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
 
@@ -686,7 +700,7 @@
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-		qcom,ath11k-calibration-variant = "QC_8280XP_CRD";
+		qcom,calibration-variant = "QC_8280XP_CRD";
 	};
 };
 
@@ -737,6 +751,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &sdc2 {
 	pinctrl-0 = <&sdc2_default_state>;
 	pinctrl-1 = <&sdc2_sleep_state>;
@@ -885,6 +905,14 @@
 		function = "normal";
 	};
 
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <0>; /* 3.3 V */
+		bias-pull-up;
+		input-enable;
+	};
+
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
 		pins = "gpio2";
 		function = "normal";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
new file mode 100644
index 000000000000..25d1fa4bc205
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc8280xp specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu {
+	zap-shader {
+		status = "disabled";
+	};
+};
+
+/*
+ * When running under QHEE, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ */
+&pcie2a {
+	iommu-map = <0 &pcie_smmu 0x20000 0x10000>;
+};
+
+&pcie2b {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+};
+
+&pcie3a {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie3b {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 56708a72c039..59e2912f495a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -998,7 +998,7 @@
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-		qcom,ath11k-calibration-variant = "LE_X13S";
+		qcom,calibration-variant = "LE_X13S";
 	};
 };
 
@@ -1090,20 +1090,11 @@
 };
 
 &pmk8280_rtc {
-	nvmem-cells = <&rtc_offset>;
-	nvmem-cell-names = "offset";
+	qcom,uefi-rtc-info;
 
 	status = "okay";
 };
 
-&pmk8280_sdam_6 {
-	status = "okay";
-
-	rtc_offset: rtc-offset@bc {
-		reg = <0xbc 0x4>;
-	};
-};
-
 &pmk8280_vadc {
 	channel@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
@@ -1186,6 +1177,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &rxmacro {
 	status = "okay";
 };
@@ -1202,9 +1199,6 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC0", "VA MIC BIAS1",
-		"VA DMIC1", "VA MIC BIAS1",
-		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index 298dbceb52ca..0ef1a9510bef 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -536,7 +536,7 @@
 		compatible = "pci17cb,1103";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		qcom,ath11k-calibration-variant = "MS_SP9_5G";
+		qcom,calibration-variant = "MS_SP9_5G";
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
index f62dacb4c88c..0a60b65e324f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -670,7 +670,7 @@
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-		qcom,ath11k-calibration-variant = "MS_Volterra";
+		qcom,calibration-variant = "MS_Volterra";
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 1e3babf2e40d..307df1d3dcd2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -32,6 +32,26 @@
 			};
 		};
 
+		pmc8280c_thermal: pmc8280c-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8280c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		pm8280_2_thermal: pm8280-2-thermal {
 			polling-delay-passive = <100>;
 
@@ -51,6 +71,26 @@
 				};
 			};
 		};
+
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
 
@@ -181,6 +221,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmc8280c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280c_gpios: gpio@8800 {
 			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -212,7 +259,7 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
 			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
@@ -235,6 +282,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmr735a_gpios: gpio@8800 {
 			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 01501acb1790..87555a119d94 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -695,6 +695,11 @@
 			no-map;
 		};
 
+		pil_slpi_mem: slpi-region@88c00000 {
+			reg = <0 0x88c00000 0 0x1500000>;
+			no-map;
+		};
+
 		pil_nsp0_mem: cdsp0-region@8a100000 {
 			reg = <0 0x8a100000 0 0x1e00000>;
 			no-map;
@@ -783,6 +788,30 @@
 		};
 	};
 
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -1221,7 +1250,7 @@
 				reg = <0 0x00980000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1253,7 +1282,7 @@
 				reg = <0 0x00984000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1285,7 +1314,7 @@
 				reg = <0 0x00988000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1331,7 +1360,7 @@
 				reg = <0 0x0098c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1363,7 +1392,7 @@
 				reg = <0 0x00990000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1395,7 +1424,7 @@
 				reg = <0 0x00994000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1427,7 +1456,7 @@
 				reg = <0 0x00998000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1459,7 +1488,7 @@
 				reg = <0 0x0099c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -2454,291 +2483,74 @@
 			reg = <0x0 0x01fc0000 0x0 0x30000>;
 		};
 
-		gpu: gpu@3d00000 {
-			compatible = "qcom,adreno-690.0", "qcom,adreno";
-
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>,
-			      <0 0x03d61000 0 0x800>;
-			reg-names = "kgsl_3d0_reg_memory",
-				    "cx_mem",
-				    "cx_dbgc";
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			qcom,gmu = <&gmu>;
-			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "gfx-mem";
-			#cooling-cells = <2>;
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sc8280xp-slpi-pas", "qcom,sm8350-slpi-pas";
+			reg = <0 0x02400000 0 0x10000>;
 
-			status = "disabled";
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
 
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-270000000 {
-					opp-hz = /bits/ 64 <270000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-peak-kBps = <451000>;
-				};
-
-				opp-410000000 {
-					opp-hz = /bits/ 64 <410000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-547000000 {
-					opp-hz = /bits/ 64 <547000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-606000000 {
-					opp-hz = /bits/ 64 <606000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-640000000 {
-					opp-hz = /bits/ 64 <640000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-655000000 {
-					opp-hz = /bits/ 64 <655000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-690000000 {
-					opp-hz = /bits/ 64 <690000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-			};
-		};
-
-		gmu: gmu@3d6a000 {
-			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x34000>,
-			      <0 0x03de0000 0 0x10000>,
-			      <0 0x0b290000 0 0x10000>;
-			reg-names = "gmu", "rscc", "gmu_pdc";
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hfi", "gmu";
-			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_CXO_CLK>,
-				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
-				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
-			clock-names = "gmu",
-				      "cxo",
-				      "axi",
-				      "memnoc",
-				      "ahb",
-				      "hub",
-				      "smmu_vote";
-			power-domains = <&gpucc GPU_CC_CX_GDSC>,
-					<&gpucc GPU_CC_GX_GDSC>;
-			power-domain-names = "cx",
-					     "gx";
-			iommus = <&gpu_smmu 5 0xc00>;
-			operating-points-v2 = <&gmu_opp_table>;
-
-			gmu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-				};
-
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-				};
-			};
-		};
-
-		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,sc8280xp-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-
-			power-domains = <&rpmhpd SC8280XP_GFX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		gpu_smmu: iommu@3da0000 {
-			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
-				     "qcom,smmu-500", "arm,mmu-500";
-			reg = <0 0x03da0000 0 0x20000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
-				 <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HUB_AON_CLK>;
-			clock-names = "gcc_gpu_memnoc_gfx_clk",
-				      "gcc_gpu_snoc_dvm_gfx_clk",
-				      "gpu_cc_ahb_clk",
-				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
-				      "gpu_cc_cx_gmu_clk",
-				      "gpu_cc_hub_cx_int_clk",
-				      "gpu_cc_hub_aon_clk";
-
-			power-domains = <&gpucc GPU_CC_CX_GDSC>;
-			dma-coherent;
-		};
-
-		usb_0_hsphy: phy@88e5000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e5000 0 0x400>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy0: phy@88e7000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e7000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy1: phy@88e8000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e8000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy2: phy@88e9000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e9000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy3: phy@88ea000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088ea000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_qmpphy0: phy@88ef000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088ef000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			clock-names = "xo";
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
-			reset-names = "phy", "phy_phy";
+			power-domains = <&rpmhpd SC8280XP_LCX>,
+					<&rpmhpd SC8280XP_LMX>;
+			power-domain-names = "lcx", "lmx";
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+			memory-region = <&pil_slpi_mem>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy0_pipe_clk";
+			qcom,qmp = <&aoss_qmp>;
 
-			#phy-cells = <0>;
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
 
 			status = "disabled";
-		};
-
-		usb_2_qmpphy1: phy@88f1000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088f1000 0 0x2000>;
 
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
-			reset-names = "phy", "phy_phy";
+				label = "slpi";
+				qcom,remote-pid = <3>;
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy1_pipe_clk";
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0521 0x0>;
+					};
 
-			#phy-cells = <0>;
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0522 0x0>;
+					};
 
-			status = "disabled";
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0523 0x0>;
+					};
+				};
+			};
 		};
 
 		remoteproc_adsp: remoteproc@3000000 {
@@ -3113,57 +2925,231 @@
 					output-low;
 				};
 
-				data-pins {
-					pins = "gpio9";
-					function = "dmic2_data";
-					drive-strength = <2>;
-					bias-pull-down;
-					input-enable;
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			wsa_swr_default: wsa-swr-default-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_default: wsa2-swr-default-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpasscc: clock-controller@33e0000 {
+			compatible = "qcom,sc8280xp-lpasscc";
+			reg = <0 0x033e0000 0 0x12000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
 				};
-			};
 
-			wsa_swr_default: wsa-swr-default-state {
-				clk-pins {
-					pins = "gpio10";
-					function = "wsa_swr_clk";
-					drive-strength = <2>;
-					slew-rate = <1>;
-					bias-disable;
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
 				};
 
-				data-pins {
-					pins = "gpio11";
-					function = "wsa_swr_data";
-					drive-strength = <2>;
-					slew-rate = <1>;
-					bias-bus-hold;
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
 				};
 			};
+		};
 
-			wsa2_swr_default: wsa2-swr-default-state {
-				clk-pins {
-					pins = "gpio15";
-					function = "wsa2_swr_clk";
-					drive-strength = <2>;
-					slew-rate = <1>;
-					bias-disable;
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&gpu_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
 				};
 
-				data-pins {
-					pins = "gpio16";
-					function = "wsa2_swr_data";
-					drive-strength = <2>;
-					slew-rate = <1>;
-					bias-bus-hold;
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 				};
 			};
 		};
 
-		lpasscc: clock-controller@33e0000 {
-			compatible = "qcom,sc8280xp-lpasscc";
-			reg = <0 0x033e0000 0 0x12000>;
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpu_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		sdc2: mmc@8804000 {
@@ -3209,6 +3195,71 @@
 			};
 		};
 
+		usb_0_hsphy: phy@88e5000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy0: phy@88e7000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy1: phy@88e8000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e8000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy2: phy@88e9000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e9000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy3: phy@88ea000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088ea000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_0_qmpphy: phy@88eb000 {
 			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
 			reg = <0 0x088eb000 0 0x4000>;
@@ -3256,6 +3307,54 @@
 			};
 		};
 
+		usb_2_qmpphy0: phy@88ef000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088ef000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy1: phy@88f1000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088f1000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_1_hsphy: phy@8902000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -4141,7 +4240,7 @@
 			mdss0_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4927,6 +5026,20 @@
 			};
 		};
 
+		pcie_smmu: iommu@14f80000 {
+			compatible = "arm,smmu-v3";
+			reg = <0 0x14f80000 0 0x80000>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 951 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 955 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 953 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "gerror",
+					  "cmdq-sync";
+			dma-coherent;
+			status = "reserved"; /* Controlled by QHEE. */
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -5459,7 +5572,7 @@
 			mdss1_mdp: display-controller@22001000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x22001000 0 0x8f000>,
-				      <0 0x220b0000 0 0x2008>;
+				      <0 0x220b0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 5e33ec5fd5c2..2b7858110d92 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -175,6 +175,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp1_uart2 {
@@ -187,6 +188,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp2_uart1 {
@@ -507,7 +509,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
 
-	qcom,ath10k-calibration-variant = "Inforce_IFC6560";
+	qcom,calibration-variant = "Inforce_IFC6560";
 
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
index a2c079bac1a7..8b1a45a4e56e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm660.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
@@ -508,6 +509,12 @@
 			reg = <0x0 0xfed00000 0x0 0xa00000>;
 			no-map;
 		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
 	};
 
 	smem: smem {
@@ -1055,7 +1062,7 @@
 					<&rpmpd SDM660_VDDMX>;
 			power-domain-names = "cx", "mx";
 
-			memory-region = <&mba_region>, <&mpss_region>;
+			memory-region = <&mba_region>, <&mpss_region>, <&mdata_mem>;
 
 			status = "disabled";
 
@@ -1379,6 +1386,7 @@
 					<&xo_board>;
 			clock-names = "iface", "core", "xo";
 
+			resets = <&gcc GCC_SDCC2_BCR>;
 
 			interconnects = <&a2noc 3 &a2noc 10>,
 					<&gnoc 0 &cnoc 28>;
@@ -1433,6 +1441,8 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			resets = <&gcc GCC_SDCC1_BCR>;
+
 			interconnects = <&a2noc 2 &a2noc 10>,
 					<&gnoc 0 &cnoc 27>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
@@ -1538,8 +1548,8 @@
 					<&sleep_clk>,
 					<&gcc GCC_MMSS_GPLL0_CLK>,
 					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-					<&mdss_dsi0_phy 1>,
-					<&mdss_dsi0_phy 0>,
+					<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+					<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 					<0>,
 					<0>,
 					<0>,
@@ -1661,8 +1671,8 @@
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE0_CLK>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 2c1172aa97e4..7b70bf6b71fe 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -45,10 +45,11 @@
 };
 
 &hsusb_phy {
-	status = "okay";
 	vdd-supply = <&pm8953_l3>;
 	vdda-pll-supply = <&pm8953_l7>;
 	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
 };
 
 &i2c_3 {
@@ -81,12 +82,22 @@
 };
 
 &lpass {
+	firmware-name = "/*(DEBLOBBED)*/";
+
 	status = "okay";
 };
 
-&pm8953_resin {
+&mpss {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+	pll-supply = <&pm8953_l7>;
+
 	status = "okay";
+};
+
+&pm8953_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pmi632_lpg {
@@ -148,17 +159,19 @@
 };
 
 &sdhc_1 {
-	status = "okay";
 	vmmc-supply = <&pm8953_l8>;
 	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
 };
 
 &sdhc_2 {
-	status = "okay";
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &rpm_requests {
@@ -175,10 +188,12 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <1240000>;
 		};
+
 		pm8953_s4: s4 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
 		};
+
 		pm8953_s5: s5 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
@@ -188,66 +203,82 @@
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1050000>;
 		};
+
 		pm8953_l2: l2 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1175000>;
 		};
+
 		pm8953_l3: l3 {
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <925000>;
 		};
+
 		pm8953_l5: l5 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l6: l6 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1900000>;
 		};
+
 		pm8953_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 		};
+
 		pm8953_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3300000>;
 		};
+
 		pm8953_l10: l10 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
 		pm8953_l11: l11 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l12: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l13: l13 {
 			regulator-min-microvolt = <3125000>;
 			regulator-max-microvolt = <3125000>;
 		};
+
 		pm8953_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l17: l17 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
+
 		pm8953_l19: l19 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
 		};
+
 		pm8953_l22: l22 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 		};
+
 		pm8953_l23: l23 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1225000>;
@@ -276,9 +307,14 @@
 };
 
 &wcnss {
+	firmware-name = "/*(DEBLOBBED)*/";
+	vddpx-supply = <&pm8953_l5>;
+
 	status = "okay";
+};
 
-	vddpx-supply = <&pm8953_l5>;
+&wcnss_ctrl {
+	firmware-name = "/*(DEBLOBBED)*/";
 };
 
 &wcnss_iris {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 7167f75bced3..a9926ad6c6f9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -107,6 +107,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -404,6 +405,8 @@
 &sdhc_2 {
 	status = "okay";
 
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
 	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm660.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm660.dtsi
index 3164a4817e32..ef4a563c0feb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -170,8 +170,8 @@
 
 		assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 					<&mmcc PCLK1_CLK_SRC>;
-		assigned-clock-parents = <&mdss_dsi1_phy 0>,
-						<&mdss_dsi1_phy 1>;
+		assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+					 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 		clocks = <&mmcc MDSS_MDP_CLK>,
 				<&mmcc MDSS_BYTE1_CLK>,
@@ -239,10 +239,10 @@
 			<&sleep_clk>,
 			<&gcc GCC_MMSS_GPLL0_CLK>,
 			<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-			<&mdss_dsi0_phy 1>,
-			<&mdss_dsi0_phy 0>,
-			<&mdss_dsi1_phy 1>,
-			<&mdss_dsi1_phy 0>,
+			<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 			<0>,
 			<0>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 279e62ec5433..c33f3de779f6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,7 +6,9 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1188,6 +1190,34 @@
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0";
@@ -1594,6 +1624,174 @@
 			#interrupt-cells = <4>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm670-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@acb3000 {
+			compatible = "qcom,sdm670-camss";
+			reg = <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0ac65000 0 0x1000>,
+			      <0 0x0ac66000 0 0x1000>,
+			      <0 0x0ac67000 0 0x1000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acc4000 0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csi0",
+				      "csi1",
+				      "csi2",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "gcc_camera_ahb",
+				      "gcc_camera_axi",
+				      "soc_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx";
+
+			iommus = <&apps_smmu 0x808 0x0>,
+				 <&apps_smmu 0x810 0x8>,
+				 <&apps_smmu 0xc08 0x0>,
+				 <&apps_smmu 0xc10 0x8>;
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					camss_endpoint0: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					camss_endpoint1: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					camss_endpoint2: endpoint {
+						status = "disabled";
+					};
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -1635,7 +1833,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sdm670-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_AXI_CLK>,
@@ -1720,8 +1918,8 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM670_CX>;
@@ -1794,7 +1992,8 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM670_CX>;
@@ -1851,10 +2050,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 743c339ba108..b7e514f81f92 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -741,10 +741,6 @@ ap_ts_i2c: &i2c14 {
 	};
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 59970082da45..51f1a4883ab8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -9,17 +9,6 @@
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/gpio/gpio.h>
 
-/ {
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-};
-
 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l26a_1p2>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b85f8ca703c5..aaee75a71910 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -444,10 +444,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -559,7 +555,8 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
 
@@ -717,19 +714,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 		direction = <2>;
 		is-compress-dai;
 	};
@@ -756,6 +753,12 @@
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
+&slpi_pas {
+	firmware-name = "/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
@@ -774,11 +777,7 @@
 		"DMIC2", "MIC BIAS3",
 		"DMIC3", "MIC BIAS3",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MM_DL4",  "MultiMedia4 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -1166,7 +1165,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+	qcom,calibration-variant = "Thundercomm_DB845C";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index db27d1e3f9ee..1b60ab4dc773 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -414,10 +414,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
@@ -499,7 +495,8 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	ports {
 		port@1 {
@@ -789,7 +786,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
+	qcom,calibration-variant = "Qualcomm_sdm845mtp";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index d86a27705bfe..b673bbb684f0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -345,10 +345,6 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
@@ -521,27 +517,27 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 
 	dai@4 {
-		reg = <4>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA5>;
 	};
 
 	dai@5 {
-		reg = <5>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA6>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..c98c1c608f8d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,15 +7,38 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &rmtfs_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
 
 / {
 	chassis-type = "handset";
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -27,9 +50,25 @@
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -68,9 +107,179 @@
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			reg = <0 0x88f00000 0 0x1c00000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0xf00000>;
+			no-map;
+		};
+
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs-mem@fde00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde00000 0 0x202000>;
+			qcom,use-guard-pages;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "Bixby";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vib_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
+		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&dsi_default &dsi_te>;
+		pinctrl-1 = <&dsi_suspend &dsi_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
 	};
 };
 
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -135,8 +344,6 @@
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +364,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:
@@ -365,10 +573,79 @@
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		leds {
+			compatible = "maxim,max77705-rgb";
+
+			multi-led {
+				color = <LED_COLOR_ID_RGB>;
+				function = LED_FUNCTION_STATUS;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_RED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+				};
+
+				led@3 {
+					reg = <3>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+		};
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 52084>;
+		};
+	};
+
+	max77705_charger: charger@69 {
+		reg = <0x69>;
+		compatible = "maxim,max77705-charger";
+		monitored-battery = <&battery>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+	};
+
+	fuel-gauge@36 {
+		reg = <0x36>;
+		compatible = "maxim,max77705-battery";
+		power-supplies = <&max77705_charger>;
+		maxim,rsns-microohm = <5000>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -383,14 +660,249 @@
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&adsp_pas {
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing =	"RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",	/* Headset Mic */
+			"AMIC3", "MIC BIAS2",	/* FM radio left Tx */
+			"AMIC4", "MIC BIAS2",	/* FM radio right Tx */
+			"DMIC0", "MCLK",	/* Bottom Mic */
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",	/* Top Mic */
+			"DMIC2", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+
+		codec {
+			sound-dai = <&wcd9340 AIF3_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
+&mss_pil {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "/*(DEBLOBBED)*/";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -418,16 +930,75 @@
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
 
+&pm8998_gpios {
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
+
+	dsi_default: dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_te: dsi-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
@@ -457,4 +1028,15 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index cf1dd16d7d78..fcf5866932f9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
- * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Casey Connolly <casey.connolly@linaro.org>
  * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
  */
 
@@ -419,10 +419,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 179594c2343e..1017c3b2783e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -415,10 +415,6 @@
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index cf8080b41edc..745df28975e5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -239,7 +239,7 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
+&gpi_dma1 {
 	status = "okay";
 };
 
@@ -392,15 +392,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -408,6 +408,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	status = "okay";
 
@@ -513,6 +517,37 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart6 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
index 76931ebad065..2d6f0e382a6c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -13,3 +13,26 @@
 	compatible = "ebbg,ft8719";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,ft8719";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
index e9427851ebaa..b58964cde834 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -13,3 +13,26 @@
 	compatible = "tianma,fhd-video", "novatek,nt36672a";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@1 {
+		compatible = "novatek,nt36672a-ts";
+		reg = <0x01>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 97e7d63b017f..b6c2be04d968 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -381,10 +381,6 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -547,15 +543,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d0314cdf0b92..3bc8471c658b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
@@ -4545,7 +4546,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sdm845-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_AXI_CLK>,
@@ -4708,8 +4709,10 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
@@ -4780,8 +4783,10 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
@@ -4952,8 +4957,6 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4975,10 +4978,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -5266,8 +5269,8 @@
 		};
 
 		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,sdm845-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x179c0000 0 0x10000>,
 			      <0 0x179d0000 0 0x10000>,
 			      <0 0x179e0000 0 0x10000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 1df21eb1e5be..7c640c56c4ca 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -355,10 +355,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 	zap-shader {
@@ -616,15 +612,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -636,10 +632,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -910,7 +903,7 @@
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Lenovo_C630";
+	qcom,calibration-variant = "Lenovo_C630";
 };
 
 &crypto {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 6c8d48ea2eaf..2cd5cb427ab9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -425,15 +425,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -445,10 +445,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 4d9dd235ab84..5e8153a76888 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -278,6 +278,24 @@
 	vdd3-supply = <&vreg_l10b_3p08>;
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x680000 0xb00000>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
index b0a8a0fe5f39..75bfc19f412c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -880,6 +880,39 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		qpic_bam: dma-controller@1c9c000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01c9c000 0x0 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x100 0x3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1cc8000 {
+			compatible = "qcom,sdx75-nand", "qcom,sdx55-nand";
+			reg = <0x0 0x01cc8000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&sleep_clk>;
+			clock-names = "core",
+				      "aon";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+			iommus = <&apps_smmu 0x100 0x3>;
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -1008,14 +1041,16 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "dp_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc GCC_USB30_GDSC>;
 
@@ -1077,7 +1112,7 @@
 			interrupt-controller;
 		};
 
-		aoss_qmp: power-controller@c310000 {
+		aoss_qmp: power-management@c310000 {
 			compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c310000 0 0x1000>;
 			interrupt-parent = <&ipcc>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
index 27453771aa68..d217d922811e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/qcom,sm4450-gpucc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -591,6 +593,72 @@
 				clocks = <&xo_board>;
 				clock-names = "xo";
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm4450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_low_svs_l2: opp-96 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L2>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
 		};
 
 		cpufreq_hw: cpufreq@17d91000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 719513ef3900..5a2085e7ad28 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -566,7 +566,7 @@
 	vdd-1.3-rfa-supply = <&pm6125_l17a>;
 	vdd-3.3-ch0-supply = <&pm6125_l23a>;
 
-	qcom,ath10k-calibration-variant = "Fxtec_QX1050";
+	qcom,calibration-variant = "Fxtec_QX1050";
 
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 94c081bf7a89..c8865779173e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -1873,7 +1874,7 @@
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6115-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -1960,7 +1961,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
@@ -2034,8 +2036,8 @@
 			reg = <0x0 0x05f00000 0 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 76a51da9d241..3cb8c29b4b1a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -379,7 +379,7 @@
 	vdd-1.8-xo-supply = <&pm6125_l16>;
 	vdd-1.3-rfa-supply = <&pm6125_l17>;
 	vdd-3.3-ch0-supply = <&pm6125_l23>;
-	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	qcom,calibration-variant = "Lenovo_P11";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
new file mode 100644
index 000000000000..68a237215bd1
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 8";
+	compatible = "xiaomi,ginkgo", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM6125>;
+	qcom,board-id = <22 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l24a>;
+	vqmmc-supply = <&vreg_l11a>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 350d807a622f..8f2d65543373 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -1250,7 +1251,7 @@
 			mdss_mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6125-dpu";
 				reg = <0x05e01000 0x83208>,
-				      <0x05eb0000 0x2008>;
+				      <0x05eb0000 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -1340,7 +1341,8 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6125_VDDCX>;
@@ -1415,8 +1417,8 @@
 			reg = <0x05f00000 0x20000>;
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index bf23033a294e..8848043f95f2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -381,9 +381,16 @@
 };
 
 &usb_1_hsphy {
+	vdd-supply = <&pm6350_l18>;
+	vdda-phy-dpdm-supply = <&pm6350_l3>;
+	vdda-pll-supply = <&pm6350_l2>;
+
 	status = "okay";
 };
 
 &usb_1_qmpphy {
+	vdda-phy-supply = <&pm6350_l16>;
+	vdda-pll-supply = <&pm6350_l22>;
+
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 00ad1d09a195..f80b21d28a92 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm6350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -566,114 +567,114 @@
 		ranges;
 
 		hyp_mem: memory@80000000 {
-			reg = <0 0x80000000 0 0x600000>;
+			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
 		xbl_aop_mem: memory@80700000 {
-			reg = <0 0x80700000 0 0x160000>;
+			reg = <0x0 0x80700000 0x0 0x160000>;
 			no-map;
 		};
 
 		cmd_db: memory@80860000 {
 			compatible = "qcom,cmd-db";
-			reg = <0 0x80860000 0 0x20000>;
+			reg = <0x0 0x80860000 0x0 0x20000>;
 			no-map;
 		};
 
 		sec_apps_mem: memory@808ff000 {
-			reg = <0 0x808ff000 0 0x1000>;
+			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
 		smem_mem: memory@80900000 {
-			reg = <0 0x80900000 0 0x200000>;
+			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
 		cdsp_sec_mem: memory@80b00000 {
-			reg = <0 0x80b00000 0 0x1e00000>;
+			reg = <0x0 0x80b00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_camera_mem: memory@86000000 {
-			reg = <0 0x86000000 0 0x500000>;
+			reg = <0x0 0x86000000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_npu_mem: memory@86500000 {
-			reg = <0 0x86500000 0 0x500000>;
+			reg = <0x0 0x86500000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_video_mem: memory@86a00000 {
-			reg = <0 0x86a00000 0 0x500000>;
+			reg = <0x0 0x86a00000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_cdsp_mem: memory@86f00000 {
-			reg = <0 0x86f00000 0 0x1e00000>;
+			reg = <0x0 0x86f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_adsp_mem: memory@88d00000 {
-			reg = <0 0x88d00000 0 0x2800000>;
+			reg = <0x0 0x88d00000 0x0 0x2800000>;
 			no-map;
 		};
 
 		wlan_fw_mem: memory@8b500000 {
-			reg = <0 0x8b500000 0 0x200000>;
+			reg = <0x0 0x8b500000 0x0 0x200000>;
 			no-map;
 		};
 
 		pil_ipa_fw_mem: memory@8b700000 {
-			reg = <0 0x8b700000 0 0x10000>;
+			reg = <0x0 0x8b700000 0x0 0x10000>;
 			no-map;
 		};
 
 		pil_ipa_gsi_mem: memory@8b710000 {
-			reg = <0 0x8b710000 0 0x5400>;
+			reg = <0x0 0x8b710000 0x0 0x5400>;
 			no-map;
 		};
 
 		pil_modem_mem: memory@8b800000 {
-			reg = <0 0x8b800000 0 0xf800000>;
+			reg = <0x0 0x8b800000 0x0 0xf800000>;
 			no-map;
 		};
 
 		cont_splash_memory: memory@a0000000 {
-			reg = <0 0xa0000000 0 0x2300000>;
+			reg = <0x0 0xa0000000 0x0 0x2300000>;
 			no-map;
 		};
 
 		dfps_data_memory: memory@a2300000 {
-			reg = <0 0xa2300000 0 0x100000>;
+			reg = <0x0 0xa2300000 0x0 0x100000>;
 			no-map;
 		};
 
 		removed_region: memory@c0000000 {
-			reg = <0 0xc0000000 0 0x3900000>;
+			reg = <0x0 0xc0000000 0x0 0x3900000>;
 			no-map;
 		};
 
 		pil_gpu_mem: memory@f0d00000 {
-			reg = <0 0xf0d00000 0 0x1000>;
+			reg = <0x0 0xf0d00000 0x0 0x1000>;
 			no-map;
 		};
 
 		debug_region: memory@ffb00000 {
-			reg = <0 0xffb00000 0 0xc0000>;
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
 			no-map;
 		};
 
 		last_log_region: memory@ffbc0000 {
-			reg = <0 0xffbc0000 0 0x40000>;
+			reg = <0x0 0xffbc0000 0x0 0x40000>;
 			no-map;
 		};
 
 		ramoops: ramoops@ffc00000 {
 			compatible = "ramoops";
-			reg = <0 0xffc00000 0 0x100000>;
+			reg = <0x0 0xffc00000 0x0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
 			pmsg-size = <0x20000>;
@@ -682,7 +683,7 @@
 		};
 
 		cmdline_region: memory@ffd00000 {
-			reg = <0 0xffd00000 0 0x1000>;
+			reg = <0x0 0xffd00000 0x0 0x1000>;
 			no-map;
 		};
 	};
@@ -786,7 +787,7 @@
 
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sm6350";
-			reg = <0 0x00100000 0 0x1f0000>;
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -800,7 +801,7 @@
 
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
-			reg = <0 0x00408000 0 0x1000>;
+			reg = <0x0 0x00408000 0x0 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -809,7 +810,7 @@
 
 		qfprom: qfprom@784000 {
 			compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
-			reg = <0 0x00784000 0 0x3000>;
+			reg = <0x0 0x00784000 0x0 0x3000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -821,16 +822,16 @@
 
 		rng: rng@793000 {
 			compatible = "qcom,prng-ee";
-			reg = <0 0x00793000 0 0x1000>;
+			reg = <0x0 0x00793000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
 		sdhc_1: mmc@7c4000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x007c4000 0 0x1000>,
-				<0 0x007c5000 0 0x1000>,
-				<0 0x007c8000 0 0x8000>;
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>,
+			      <0x0 0x007c8000 0x0 0x8000>;
 			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
@@ -875,7 +876,7 @@
 
 		gpi_dma0: dma-controller@800000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00800000 0 0x60000>;
+			reg = <0x0 0x00800000 0x0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +908,7 @@
 
 			i2c0: i2c@880000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00880000 0 0x4000>;
+				reg = <0x0 0x00880000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
@@ -927,7 +928,7 @@
 
 			uart1: serial@884000 {
 				compatible = "qcom,geni-uart";
-				reg = <0 0x00884000 0 0x4000>;
+				reg = <0x0 0x00884000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
@@ -943,7 +944,7 @@
 
 			i2c2: i2c@888000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00888000 0 0x4000>;
+				reg = <0x0 0x00888000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				pinctrl-names = "default";
@@ -964,7 +965,7 @@
 
 		gpi_dma1: dma-controller@900000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00900000 0 0x60000>;
+			reg = <0x0 0x00900000 0x0 0x60000>;
 			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
@@ -996,7 +997,7 @@
 
 			i2c6: i2c@980000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00980000 0 0x4000>;
+				reg = <0x0 0x00980000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
@@ -1016,7 +1017,7 @@
 
 			i2c7: i2c@984000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00984000 0 0x4000>;
+				reg = <0x0 0x00984000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
@@ -1036,7 +1037,7 @@
 
 			i2c8: i2c@988000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00988000 0 0x4000>;
+				reg = <0x0 0x00988000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
@@ -1056,7 +1057,7 @@
 
 			uart9: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x0098c000 0 0x4000>;
+				reg = <0x0 0x0098c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
@@ -1070,7 +1071,7 @@
 
 			i2c10: i2c@990000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00990000 0 0x4000>;
+				reg = <0x0 0x00990000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
@@ -1091,14 +1092,14 @@
 
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm6350-config-noc";
-			reg = <0 0x01500000 0 0x28000>;
+			reg = <0x0 0x01500000 0x0 0x28000>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sm6350-system-noc";
-			reg = <0 0x01620000 0 0x17080>;
+			reg = <0x0 0x01620000 0x0 0x17080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1111,14 +1112,14 @@
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sm6350-aggre1-noc";
-			reg = <0 0x016e0000 0 0x15080>;
+			reg = <0x0 0x016e0000 0x0 0x15080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sm6350-aggre2-noc";
-			reg = <0 0x01700000 0 0x1f880>;
+			reg = <0x0 0x01700000 0x0 0x1f880>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1131,7 +1132,7 @@
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sm6350-mmss-noc";
-			reg = <0 0x01740000 0 0x1c100>;
+			reg = <0x0 0x01740000 0x0 0x1c100>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
@@ -1139,8 +1140,8 @@
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d90000 0 0x8000>;
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01d90000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy>;
@@ -1188,7 +1189,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1000>;
+			reg = <0x0 0x01d87000 0x0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -1209,7 +1210,7 @@
 
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
-			reg = <0 0x01dc4000 0 0x24000>;
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
@@ -1225,7 +1226,7 @@
 
 		crypto: crypto@1dfa000 {
 			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
-			reg = <0 0x01dfa000 0 0x6000>;
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
 			dmas = <&cryptobam 4>, <&cryptobam 5>;
 			dma-names = "rx", "tx";
 			iommus = <&apps_smmu 0x426 0x11>,
@@ -1243,9 +1244,9 @@
 
 			iommus = <&apps_smmu 0x440 0x0>,
 				 <&apps_smmu 0x442 0x0>;
-			reg = <0 0x01e40000 0 0x8000>,
-			      <0 0x01e50000 0 0x3000>,
-			      <0 0x01e04000 0 0x23000>;
+			reg = <0x0 0x01e40000 0x0 0x8000>,
+			      <0x0 0x01e50000 0x0 0x3000>,
+			      <0x0 0x01e04000 0x0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -1351,8 +1352,8 @@
 
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-619.0", "qcom,adreno";
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>;
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>;
 			reg-names = "kgsl_3d0_reg_memory",
 				    "cx_mem";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -1419,7 +1420,7 @@
 
 		adreno_smmu: iommu@3d40000 {
 			compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0 0x03d40000 0 0x10000>;
+			reg = <0x0 0x03d40000 0x0 0x10000>;
 			#iommu-cells = <1>;
 			#global-interrupts = <2>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
@@ -1445,9 +1446,9 @@
 
 		gmu: gmu@3d6a000 {
 			compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x31000>,
-			      <0 0x0b290000 0 0x10000>,
-			      <0 0x0b490000 0 0x10000>;
+			reg = <0x0 0x03d6a000 0x0 0x31000>,
+			      <0x0 0x0b290000 0x0 0x10000>,
+			      <0x0 0x0b490000 0x0 0x10000>;
 			reg-names = "gmu",
 				    "gmu_pdc",
 				    "gmu_pdc_seq";
@@ -1489,7 +1490,7 @@
 
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm6350-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
+			reg = <0x0 0x03d90000 0x0 0x9000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_GPU_GPLL0_CLK>,
 				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
@@ -1543,7 +1544,7 @@
 
 		cdsp: remoteproc@8300000 {
 			compatible = "qcom,sm6350-cdsp-pas";
-			reg = <0 0x08300000 0 0x10000>;
+			reg = <0x0 0x08300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1642,7 +1643,7 @@
 
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x08804000 0 0x1000>;
+			reg = <0x0 0x08804000 0x0 0x1000>;
 
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -1691,7 +1692,7 @@
 
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
-			reg = <0 0x088e3000 0 0x400>;
+			reg = <0x0 0x088e3000 0x0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
 
@@ -1703,7 +1704,7 @@
 
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
+			reg = <0x0 0x088e8000 0x0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
@@ -1754,27 +1755,27 @@
 
 		dc_noc: interconnect@9160000 {
 			compatible = "qcom,sm6350-dc-noc";
-			reg = <0 0x09160000 0 0x3200>;
+			reg = <0x0 0x09160000 0x0 0x3200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm6350-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg = <0x0 0x09200000 0x0 0x50000>, <0x0 0x09600000 0x0 0x50000>;
 			reg-names = "llcc0_base", "llcc_broadcast_base";
 		};
 
 		gem_noc: interconnect@9680000 {
 			compatible = "qcom,sm6350-gem-noc";
-			reg = <0 0x09680000 0 0x3e200>;
+			reg = <0x0 0x09680000 0x0 0x3e200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		npu_noc: interconnect@9990000 {
 			compatible = "qcom,sm6350-npu-noc";
-			reg = <0 0x09990000 0 0x1600>;
+			reg = <0x0 0x09990000 0x0 0x1600>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
@@ -1878,7 +1879,7 @@
 
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -1916,7 +1917,7 @@
 
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x540 0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -1954,7 +1955,7 @@
 
 		cci0: cci@ac4a000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4a000 0 0x1000>;
+			reg = <0x0 0x0ac4a000 0x0 0x1000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -2001,7 +2002,7 @@
 
 		cci1: cci@ac4b000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4b000 0 0x1000>;
+			reg = <0x0 0x0ac4b000 0x0 0x1000>;
 			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -2043,7 +2044,7 @@
 
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sm6350-camcc";
-			reg = <0 0x0ad00000 0 0x16000>;
+			reg = <0x0 0x0ad00000 0x0 0x16000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2052,7 +2053,7 @@
 
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm6350-mdss";
-			reg = <0 0x0ae00000 0 0x1000>;
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
 			reg-names = "mdss";
 
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -2084,8 +2085,8 @@
 
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm6350-dpu";
-				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -2168,11 +2169,11 @@
 
 			mdss_dp: displayport-controller@ae90000 {
 				compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0x600>,
-				      <0 0xae91000 0 0x400>,
-				      <0 0xae91400 0 0x400>;
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0x600>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -2248,7 +2249,7 @@
 
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0 0x0ae94000 0 0x400>;
+				reg = <0x0 0x0ae94000 0x0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -2269,7 +2270,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd SM6350_MX>;
@@ -2324,9 +2326,9 @@
 
 			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
-				reg = <0 0x0ae94400 0 0x200>,
-				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94a00 0 0x1e0>;
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94a00 0x0 0x1e0>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -2344,11 +2346,11 @@
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm6350-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0x0 0x0af00000 0x0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -2364,7 +2366,7 @@
 
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm6350-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x17c000f0 0x0 0x64>;
 			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
 					  <125 63 1>, <126 655 12>, <138 139 15>;
 			#interrupt-cells = <2>;
@@ -2374,8 +2376,8 @@
 
 		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c263000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c222000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -2385,8 +2387,8 @@
 
 		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c265000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c223000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -2396,7 +2398,7 @@
 
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x1000>;
+			reg = <0x0 0x0c300000 0x0 0x1000>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
 						     IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
@@ -2406,11 +2408,11 @@
 
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0x0c440000 0 0x1100>,
-			      <0 0x0c600000 0 0x2000000>,
-			      <0 0x0e600000 0 0x100000>,
-			      <0 0x0e700000 0 0xa0000>,
-			      <0 0x0c40a000 0 0x26000>;
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -2424,7 +2426,7 @@
 
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm6350-tlmm";
-			reg = <0 0x0f100000 0 0x300000>;
+			reg = <0x0 0x0f100000 0x0 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -2603,7 +2605,7 @@
 
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x100000>;
+			reg = <0x0 0x15000000 0x0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
@@ -2701,7 +2703,7 @@
 
 		watchdog@17c10000 {
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
-			reg = <0 0x17c10000 0 0x1000>;
+			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
@@ -2855,7 +2857,7 @@
 
 		cpufreq_hw: cpufreq@18323000 {
 			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
-			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+			reg = <0x0 0x18323000 0x0 0x1000>, <0x0 0x18325800 0x0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
@@ -2866,7 +2868,7 @@
 
 		wifi: wifi@18800000 {
 			compatible = "qcom,wcn3990-wifi";
-			reg = <0 0x18800000 0 0x800000>;
+			reg = <0x0 0x18800000 0x0 0x800000>;
 			reg-names = "membase";
 			memory-region = <&wlan_fw_mem>;
 			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index 884c0dc26dd4..dfd02b33faee 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -253,6 +253,124 @@
 		regulator-max-microvolt = <3700000>;
 	};
 
+	vreg_cam_vio_1p8: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam_vio_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Always-on prevents CCI bus timeouts */
+		regulator-always-on;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vana_2p8: regulator-camf-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vdig_1p1: regulator-camf-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camu_vaf_1p8: regulator-camu-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vana_2p8: regulator-camu-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vdig_1p1: regulator-camu-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camw_vaf_1p8: regulator-camw-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vana_2p8: regulator-camw-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vdig_1p1: regulator-camw-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
 	// S2B is really ebi.lvl but it's there for supply map completeness sake.
 	vreg_s2b_0p7: smpa3-regulator {
 		compatible = "regulator-fixed";
@@ -714,11 +832,26 @@
 };
 
 &cci0 {
+	/*
+	 * cci0_i2c1 bus is unused and GPIO 71&72 are repurposed.
+	 * So set only cci0_i2c0 pinctrl here.
+	 */
+	pinctrl-0 = <&cci0_default>;
+	pinctrl-1 = <&cci0_sleep>;
+
 	status = "okay";
 };
 
 &cci0_i2c0 {
-	/* sony,imx471 (Front) */
+	/* D-PHY sony,imx471 (Front) @ 0x1a */
+
+	camf_p24c64f: eeprom@52 {
+		compatible = "puya,p24c64f",
+			     "atmel,24c64";
+		reg = <0x52>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1 {
@@ -726,11 +859,29 @@
 };
 
 &cci1_i2c0 {
-	/* samsung,s5kjn1 (Rear-aux UW) */
+	/* actuator (For Ultra Wide sensor) @ 0xc */
+	/* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */
+
+	camu_gt24p128e: eeprom@51 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1_i2c1 {
-	/* sony,imx766 (Rear Wide) */
+	/* actuator (For Wide sensor) @ 0xc */
+	/* C-PHY sony,imx766 (Wide) @ 0x10 */
+
+	camw_gt24p128e: eeprom@50 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x50>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &gcc {
@@ -757,6 +908,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &gpu_zap_shader {
 	firmware-name = "/*(DEBLOBBED)*/";
 };
@@ -823,15 +978,44 @@
 	status = "okay";
 };
 
-/* MDSS remains disabled until the panel driver is present. */
+&mdss {
+	status = "okay";
+};
+
 &mdss_dsi {
 	vdda-supply = <&vdd_a_dsi_0_1p2>;
+	status = "okay";
 
-	/* Visionox RM692E5 panel */
+	panel: panel@0 {
+		compatible = "nothing,rm692e5-spacewar",
+			     "visionox,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&vdd_oled>;
+		vddio-supply = <&vdd_io_oled>;
+
+		pinctrl-0 = <&lcd_reset_n>,
+			    <&mdp_vsync_p>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
 };
 
 &mdss_dsi_phy {
 	vdds-supply = <&vdd_a_dsi_0_0p9>;
+	status = "okay";
 };
 
 &pm7325_gpios {
@@ -1039,7 +1223,7 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 };
 
@@ -1147,6 +1331,20 @@
 		bias-pull-down;
 	};
 
+	lcd_reset_n: lcd-reset-n-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hst_bt_en: hst-bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 53e7808ca006..9eae88e28dec 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -500,7 +500,8 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
 
@@ -719,5 +720,5 @@
 	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
 
-	qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+	qcom,calibration-variant = "Qualcomm_sm8150hdk";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 4dbda54b47a5..cdb47359c4c8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,videocc-sm8150.h>
@@ -3657,6 +3658,7 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
@@ -3736,6 +3738,7 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
@@ -3808,7 +3811,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8150-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3981,8 +3984,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
@@ -4074,8 +4077,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
@@ -4130,10 +4133,10 @@
 			compatible = "qcom,sm8150-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index f97336547ed3..00a8f6b1b189 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -659,7 +659,8 @@
 	qcom,dual-dsi-mode;
 	qcom,sync-dual-dsi;
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 	status = "okay";
 };
 
@@ -699,7 +700,7 @@
 		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
 		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
 
-		qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro";
+		qcom,calibration-variant = "Xiaomi_Pad_5Pro";
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c2937b4d9f18..f0d18fd37aaf 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -606,7 +607,7 @@
 		};
 
 		cpu7_opp9: opp-1747200000 {
-			opp-hz = /bits/ 64 <1708800000>;
+			opp-hz = /bits/ 64 <1747200000>;
 			opp-peak-kBps = <5412000 42393600>;
 		};
 
@@ -4690,7 +4691,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -4861,8 +4862,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -4953,8 +4956,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -5011,10 +5016,10 @@
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 69da30f35baa..971c828a7555 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -21,6 +22,7 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 
@@ -455,7 +457,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
@@ -1806,11 +1808,11 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x594 0x0011>,
 				 <&apps_smmu 0x596 0x0011>;
-			/* FIXME: Probing BAM DMA causes some abort and system hang */
-			status = "fail";
 		};
 
 		crypto: crypto@1dfa000 {
@@ -1822,8 +1824,6 @@
 				 <&apps_smmu 0x596 0x0011>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "memory";
-			/* FIXME: dependency BAM DMA is disabled */
-			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1958,15 +1958,15 @@
 							iommus = <&apps_smmu 0x1801 0x0>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 							};
 
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 							};
 
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 							};
 						};
 					};
@@ -2653,6 +2653,7 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
@@ -2731,6 +2732,7 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
@@ -2776,7 +2778,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -2960,8 +2962,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi0_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3059,8 +3061,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi1_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3140,8 +3142,10 @@
 			compatible = "qcom,sm8350-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9c809fc5fa45..54c6d0fdb2af 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
@@ -2262,6 +2263,68 @@
 			};
 		};
 
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sm8450-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommus = <&apps_smmu 0x1c80 0x7f>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			num-lanes = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
 			reg = <0 0x01c0e000 0 0x2000>;
@@ -3274,7 +3337,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8450-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3456,8 +3519,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3548,8 +3613,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3608,10 +3675,10 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -5283,6 +5350,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x584 0x11>,
 				 <&apps_smmu 0x588 0x0>,
@@ -5397,6 +5466,7 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index ed283a946181..a6b01f5bee5e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -945,6 +945,10 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index d2f38a011d85..56ad8362b25c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -672,6 +672,10 @@
 	};
 };
 
+&iris {
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 7c119e216698..a99c00942dd8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -779,6 +779,10 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
index eac8de4005d8..71a7e3b57ece 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,sm8550-camcc.h>
@@ -331,7 +332,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
 			qcom,dload-mode = <&tcsr 0x19000>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 		};
 	};
 
@@ -347,6 +349,48 @@
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_125mhz: opp-table-qup125mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -850,13 +894,18 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -868,13 +917,18 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -890,13 +944,18 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -908,13 +967,18 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -930,13 +994,18 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -948,13 +1017,18 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -970,13 +1044,18 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -988,13 +1067,18 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1010,13 +1094,18 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1028,13 +1117,18 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1050,13 +1144,18 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1068,13 +1167,18 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1088,9 +1192,13 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
 				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_125mhz>;
 				status = "disabled";
 			};
 
@@ -1104,13 +1212,18 @@
 				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1122,13 +1235,18 @@
 				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1156,9 +1274,13 @@
 				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1173,9 +1295,13 @@
 				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1190,9 +1316,13 @@
 				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1207,9 +1337,13 @@
 				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1224,9 +1358,13 @@
 				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1241,9 +1379,13 @@
 				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1258,9 +1400,13 @@
 				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1275,9 +1421,13 @@
 				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1292,9 +1442,13 @@
 				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1309,9 +1463,13 @@
 				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 		};
@@ -1347,7 +1505,8 @@
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			iommus = <&apps_smmu 0xa3 0>;
-			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "qup-core";
 			dma-coherent;
 			#address-cells = <2>;
@@ -1364,13 +1523,18 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1382,13 +1546,18 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1404,13 +1573,18 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1422,13 +1596,18 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1444,13 +1623,18 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1462,13 +1646,18 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1484,13 +1673,18 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1502,13 +1696,18 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1524,13 +1723,18 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1542,13 +1746,18 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1562,13 +1771,18 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c5_data_clk>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1582,13 +1796,18 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1602,13 +1821,18 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c6_data_clk>;
 				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1622,13 +1846,18 @@
 				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1643,8 +1872,12 @@
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
 				interconnect-names = "qup-core", "qup-config";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 		};
@@ -1768,8 +2001,10 @@
 				      "ddrss_sf_tbu",
 				      "noc_aggr";
 
-			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			msi-map = <0x0 &gic_its 0x1400 0x1>,
@@ -1785,8 +2020,49 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+			};
+
 			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1891,8 +2167,10 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			msi-map = <0x0 &gic_its 0x1480 0x1>,
@@ -1909,8 +2187,56 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1957,6 +2283,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
@@ -1969,7 +2297,8 @@
 			dma-names = "rx", "tx";
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "memory";
 		};
 
@@ -2013,8 +2342,10 @@
 			dma-coherent;
 
 			operating-points-v2 = <&ufs_opp_table>;
-			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 			clock-names = "core_clk",
@@ -2314,8 +2645,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "memory",
 					     "config";
 
@@ -2349,7 +2682,8 @@
 					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
-			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
 
@@ -2390,7 +2724,8 @@
 					<&rpmhpd RPMHPD_LMX>;
 			power-domain-names = "lcx", "lmx";
 
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
 
@@ -2848,8 +3183,10 @@
 			power-domains = <&rpmhpd RPMHPD_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
-			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 			bus-width = <4>;
 			dma-coherent;
@@ -2884,6 +3221,87 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable in boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sm8550-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;
@@ -3020,8 +3438,11 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
 
 			iommus = <&apps_smmu 0x1c00 0x2>;
 
@@ -3034,7 +3455,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8550-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -3215,8 +3636,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3310,8 +3731,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3369,10 +3790,10 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -3493,8 +3914,10 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			status = "disabled";
@@ -4617,7 +5040,8 @@
 			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&llcc_bwmon_opp_table>;
 
@@ -4666,7 +5090,8 @@
 			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b6400 0 0x600>;
 			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&cpu_bwmon_opp_table>;
 
@@ -4750,7 +5175,8 @@
 					<&rpmhpd RPMHPD_NSP>;
 			power-domain-names = "cx", "mxc", "nsp";
 
-			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 86684cb9a932..495ea9bfd008 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2023, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8650-camcc.h>
 #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
@@ -15,6 +16,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -85,6 +87,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 0>;
 
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_0: l2-cache {
@@ -118,6 +129,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 0>;
 
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 		};
 
@@ -138,6 +158,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_200: l2-cache {
@@ -159,13 +188,29 @@
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&l2_200>;
+			next-level-cache = <&l2_300>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 
 		cpu4: cpu@400 {
@@ -185,6 +230,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_400: l2-cache {
@@ -212,6 +266,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 1>;
 
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_500: l2-cache {
@@ -239,6 +302,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 1>;
 
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_600: l2-cache {
@@ -266,6 +338,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 2>;
 
+			operating-points-v2 = <&cpu7_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_700: l2-cache {
@@ -290,155 +371,1230 @@
 					cpu = <&cpu2>;
 				};
 
-				core3 {
-					cpu = <&cpu3>;
-				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			silver_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			gold_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			gold_plus_cpu_sleep_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			cluster_sleep_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu0>;
+
+		out-ports {
+			port {
+				ete0_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete0>;
+				};
+			};
+		};
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu1>;
+
+		out-ports {
+			port {
+				ete1_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete1>;
+				};
+			};
+		};
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu2>;
+
+		out-ports {
+			port {
+				ete2_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete2>;
+				};
+			};
+		};
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu3>;
+
+		out-ports {
+			port {
+				ete3_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete3>;
+				};
+			};
+		};
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu4>;
+
+		out-ports {
+			port {
+				ete4_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete4>;
+				};
+			};
+		};
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu5>;
+
+		out-ports {
+			port {
+				ete5_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete5>;
+				};
+			};
+		};
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu6>;
+
+		out-ports {
+			port {
+				ete6_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete6>;
+				};
+			};
+		};
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu7>;
+
+		out-ports {
+			port {
+				ete7_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete7>;
+				};
+			};
+		};
+	};
+
+	funnel-ete {
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				funnel_ete_in_ete0: endpoint {
+					remote-endpoint = <&ete0_out_funnel_ete>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				funnel_ete_in_ete1: endpoint {
+					remote-endpoint = <&ete1_out_funnel_ete>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				funnel_ete_in_ete2: endpoint {
+					remote-endpoint = <&ete2_out_funnel_ete>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				funnel_ete_in_ete3: endpoint {
+					remote-endpoint = <&ete3_out_funnel_ete>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+
+				funnel_ete_in_ete4: endpoint {
+					remote-endpoint = <&ete4_out_funnel_ete>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+
+				funnel_ete_in_ete5: endpoint {
+					remote-endpoint = <&ete5_out_funnel_ete>;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+
+				funnel_ete_in_ete6: endpoint {
+					remote-endpoint = <&ete6_out_funnel_ete>;
+				};
+			};
+
+			port@7 {
+				reg = <7>;
+
+				funnel_ete_in_ete7: endpoint {
+					remote-endpoint = <&ete7_out_funnel_ete>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				funnel_ete_out_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_in_funnel_ete>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_128mhz: opp-table-qup128mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_240mhz: opp-table-qup240mhz {
+		compatible = "operating-points-v2";
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-364800000 {
+			opp-hz = /bits/ 64 <364800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (384000 * 32)>;
+		};
+
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (729600 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (844800 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (940800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1132800 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu5_opp_table: opp-table-cpu5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(806000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-				core4 {
-					cpu = <&cpu4>;
-				};
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-				core5 {
-					cpu = <&cpu5>;
-				};
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-				core6 {
-					cpu = <&cpu6>;
-				};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-				core7 {
-					cpu = <&cpu7>;
-				};
-			};
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
 		};
 
-		idle-states {
-			entry-method = "psci";
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-			silver_cpu_sleep_0: cpu-sleep-0-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "silver-rail-power-collapse";
-				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <550>;
-				exit-latency-us = <750>;
-				min-residency-us = <6700>;
-				local-timer-stop;
-			};
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-			gold_cpu_sleep_0: cpu-sleep-1-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "gold-rail-power-collapse";
-				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <600>;
-				exit-latency-us = <1300>;
-				min-residency-us = <8136>;
-				local-timer-stop;
-			};
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-			gold_plus_cpu_sleep_0: cpu-sleep-2-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "gold-plus-rail-power-collapse";
-				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <500>;
-				exit-latency-us = <1350>;
-				min-residency-us = <7480>;
-				local-timer-stop;
-			};
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
 		};
 
-		domain-idle-states {
-			cluster_sleep_0: cluster-sleep-0 {
-				compatible = "domain-idle-state";
-				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <750>;
-				exit-latency-us = <2350>;
-				min-residency-us = <9144>;
-			};
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
 
-			cluster_sleep_1: cluster-sleep-1 {
-				compatible = "domain-idle-state";
-				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2800>;
-				exit-latency-us = <4400>;
-				min-residency-us = <10150>;
-			};
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
 		};
-	};
 
-	ete0 {
-		compatible = "arm,embedded-trace-extension";
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
 
-		cpu = <&cpu0>;
+		opp-2688000000 {
+			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
 
-		out-ports {
-			port {
-				ete0_out_funnel_ete: endpoint {
-					remote-endpoint = <&funnel_ete_in_ete0>;
-				};
-			};
+		opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
 		};
-	};
 
-	funnel-ete {
-		compatible = "arm,coresight-static-funnel";
+		opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
 
-		in-ports {
-			port {
-				funnel_ete_in_ete0: endpoint {
-					remote-endpoint = <&ete0_out_funnel_ete>;
-				};
-			};
+		opp-2880000000 {
+			opp-hz = /bits/ 64 <2880000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
 		};
 
-		out-ports {
-			port {
-				funnel_ete_out_funnel_apss: endpoint {
-					remote-endpoint = <&funnel_apss_in_funnel_ete>;
-				};
-			};
+		opp-2937600000 {
+			opp-hz = /bits/ 64 <2937600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
 		};
-	};
 
-	firmware {
-		scm: scm {
-			compatible = "qcom,scm-sm8650", "qcom,scm";
-			qcom,dload-mode = <&tcsr 0x19000>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
 		};
-	};
 
-	clk_virt: interconnect-0 {
-		compatible = "qcom,sm8650-clk-virt";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
+		opp-3052800000 {
+			opp-hz = /bits/ 64 <3052800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
 
-	mc_virt: interconnect-1 {
-		compatible = "qcom,sm8650-mc-virt";
-		#interconnect-cells = <2>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
+		opp-3187200000 {
+			opp-hz = /bits/ 64 <3187200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
 
-	memory@a0000000 {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the size */
-		reg = <0 0xa0000000 0 0>;
+		opp-3302400000 {
+			opp-hz = /bits/ 64 <3302400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
 	};
 
 	pmu-a520 {
 		compatible = "arm,cortex-a520-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
 	};
 
 	pmu-a720 {
 		compatible = "arm,cortex-a720-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
 	};
 
 	pmu-x4 {
 		compatible = "arm,cortex-x4-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
 	};
 
 	psci {
@@ -460,7 +1616,7 @@
 		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
-			domain-idle-states = <&silver_cpu_sleep_0>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
 		cpu_pd3: power-domain-cpu3 {
@@ -816,7 +1972,7 @@
 			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
 			reg = <0 0x00406000 0 0x1000>;
 
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
@@ -827,18 +1983,18 @@
 			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
 
-			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			dma-channels = <12>;
 			dma-channel-mask = <0x3f>;
@@ -874,21 +2030,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00880000 0 0x4000>;
 
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -907,21 +2067,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00880000 0 0x4000>;
 
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -940,21 +2104,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00884000 0 0x4000>;
 
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -973,21 +2141,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00884000 0 0x4000>;
 
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1006,21 +2178,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00888000 0 0x4000>;
 
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1039,21 +2215,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00888000 0 0x4000>;
 
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1072,21 +2252,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0088c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1105,21 +2289,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x0088c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1138,21 +2326,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00890000 0 0x4000>;
 
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1171,21 +2363,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00890000 0 0x4000>;
 
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1204,21 +2400,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00894000 0 0x4000>;
 
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1237,21 +2437,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00894000 0 0x4000>;
 
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1270,18 +2474,22 @@
 				compatible = "qcom,geni-uart";
 				reg = <0 0x00898000 0 0x4000>;
 
-				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_128mhz>;
+
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
 				pinctrl-names = "default";
 
@@ -1292,18 +2500,22 @@
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x0089c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				pinctrl-0 = <&qup_uart15_default>;
 				pinctrl-names = "default";
 
@@ -1328,7 +2540,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00980000 0 0x4000>;
 
-				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1337,11 +2549,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c0_data_clk>;
 				pinctrl-names = "default";
 
@@ -1355,7 +2571,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00984000 0 0x4000>;
 
-				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1364,11 +2580,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c1_data_clk>;
 				pinctrl-names = "default";
 
@@ -1382,7 +2602,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00988000 0 0x4000>;
 
-				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1391,11 +2611,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c2_data_clk>;
 				pinctrl-names = "default";
 
@@ -1409,7 +2633,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x0098c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1418,11 +2642,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c3_data_clk>;
 				pinctrl-names = "default";
 
@@ -1436,7 +2664,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00990000 0 0x4000>;
 
-				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1445,11 +2673,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c4_data_clk>;
 				pinctrl-names = "default";
 
@@ -1463,7 +2695,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00994000 0 0x4000>;
 
-				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1472,11 +2704,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c5_data_clk>;
 				pinctrl-names = "default";
 
@@ -1490,7 +2726,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00998000 0 0x4000>;
 
-				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1499,11 +2735,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c6_data_clk>;
 				pinctrl-names = "default";
 
@@ -1517,7 +2757,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x0099c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1526,11 +2766,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c7_data_clk>;
 				pinctrl-names = "default";
 
@@ -1544,7 +2788,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x009a0000 0 0x4000>;
 
-				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1553,11 +2797,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c8_data_clk>;
 				pinctrl-names = "default";
 
@@ -1571,7 +2819,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x009a4000 0 0x4000>;
 
-				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1580,11 +2828,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c9_data_clk>;
 				pinctrl-names = "default";
 
@@ -1599,18 +2851,18 @@
 			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			dma-channels = <12>;
 			dma-channel-mask = <0xc>;
@@ -1649,21 +2901,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a80000 0 0x4000>;
 
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1682,21 +2938,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a80000 0 0x4000>;
 
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1715,21 +2975,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a84000 0 0x4000>;
 
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1748,21 +3012,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a84000 0 0x4000>;
 
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1781,21 +3049,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a88000 0 0x4000>;
 
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1814,21 +3086,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a88000 0 0x4000>;
 
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1847,21 +3123,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a8c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1880,21 +3160,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a8c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1913,21 +3197,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a90000 0 0x4000>;
 
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1946,21 +3234,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a90000 0 0x4000>;
 
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1979,21 +3271,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a94000 0 0x4000>;
 
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2012,21 +3308,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a94000 0 0x4000>;
 
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2045,21 +3345,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a98000 0 0x4000>;
 
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2078,21 +3382,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a98000 0 0x4000>;
 
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2111,21 +3419,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a9c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2144,21 +3456,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a9c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2260,15 +3576,15 @@
 			      <0 0x60100000 0 0x100000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2301,20 +3617,22 @@
 
 			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			iommu-map = <0     &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -2338,6 +3656,45 @@
 
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+			};
+
 			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2394,15 +3751,15 @@
 				    "atu",
 				    "config";
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2440,20 +3797,22 @@
 
 			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			iommu-map = <0     &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -2477,6 +3836,52 @@
 
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2525,7 +3930,7 @@
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x28000>;
 
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			#dma-cells = <1>;
 
@@ -2533,6 +3938,8 @@
 				 <&apps_smmu 0x481 0>;
 
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 		};
 
@@ -2577,7 +3984,7 @@
 			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -2595,28 +4002,22 @@
 				      "tx_lane0_sync_clk",
 				      "rx_lane0_sync_clk",
 				      "rx_lane1_sync_clk";
-			freq-table-hz = <100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<100000000 403000000>,
-					<100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<0 0>;
 
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "ufs-ddr",
 					     "cpu-ufs";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
 
+			operating-points-v2 = <&ufs_opp_table>;
+
 			iommus = <&apps_smmu 0x60 0>;
 
 			lanes-per-direction = <2>;
@@ -2628,6 +4029,46 @@
 			#reset-cells = <1>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ice: crypto@1d88000 {
@@ -2664,7 +4105,7 @@
 				    "cx_mem",
 				    "cx_dbgc";
 
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			iommus = <&adreno_smmu 0 0x0>,
 				 <&adreno_smmu 1 0x0>;
@@ -2763,8 +4204,8 @@
 			      <0x0 0x0b280000 0x0 0x10000>;
 			reg-names = "gmu", "rscc", "gmu_pdc";
 
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hfi", "gmu";
 
 			clocks = <&gpucc GPU_CC_AHB_CLK>,
@@ -2827,32 +4268,32 @@
 			reg = <0x0 0x03da0000 0x0 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
@@ -2877,8 +4318,8 @@
 				    "ipa-shared",
 				    "gsi";
 
-			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ipa",
@@ -2889,8 +4330,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "memory",
 					     "config";
 
@@ -2908,7 +4351,7 @@
 			compatible = "qcom,sm8650-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3125,7 +4568,7 @@
 		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsa2macro>;
 			clock-names = "iface";
 			label = "WSA2";
@@ -3172,7 +4615,7 @@
 		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_rxmacro>;
 			clock-names = "iface";
 			label = "RX";
@@ -3236,7 +4679,7 @@
 		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsamacro>;
 			clock-names = "iface";
 			label = "WSA";
@@ -3266,8 +4709,8 @@
 		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
-			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "core", "wakeup";
 			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
@@ -3458,8 +4901,8 @@
 			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hc_irq",
 					  "pwr_irq";
 
@@ -3472,8 +4915,8 @@
 
 			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "sdhc-ddr",
 					     "cpu-sdhc";
 
@@ -3533,7 +4976,7 @@
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac15000 0 0x1000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3566,7 +5009,7 @@
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac16000 0 0x1000>;
-			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3599,7 +5042,7 @@
 		cci2: cci@ac17000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac17000 0 0x1000>;
-			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3647,7 +5090,7 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3656,8 +5099,11 @@
 			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
 
 			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "mdp0-mem";
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -3675,7 +5121,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8650-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 
@@ -3775,8 +5221,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3872,8 +5318,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -4020,10 +5466,10 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -4116,8 +5562,8 @@
 			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
 					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -4146,6 +5592,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
 
@@ -4159,7 +5612,7 @@
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				iommus = <&apps_smmu 0x40 0>;
 
@@ -4223,8 +5676,8 @@
 			reg = <0 0x0c228000 0 0x1000>, /* TM */
 			      <0 0x0c222000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4238,8 +5691,8 @@
 			reg = <0 0x0c229000 0 0x1000>, /* TM */
 			      <0 0x0c223000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4253,8 +5706,8 @@
 			reg = <0 0x0c22a000 0 0x1000>, /* TM */
 			      <0 0x0c224000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4312,7 +5765,7 @@
 			compatible = "qcom,sm8650-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
 
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -5188,103 +6641,103 @@
 			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
 
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -5297,9 +6750,9 @@
 			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
 
-			#interrupt-cells = <3>;
+			#interrupt-cells = <4>;
 			interrupt-controller;
 
 			#redistributor-regions = <1>;
@@ -5309,6 +6762,20 @@
 			#size-cells = <2>;
 			ranges;
 
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu2 &cpu3 &cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+
 			gic_its: msi-controller@17140000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17140000 0 0x20000>;
@@ -5330,8 +6797,8 @@
 				reg = <0x17421000 0x1000>,
 				      <0x17422000 0x1000>;
 
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <0>;
 			};
@@ -5339,7 +6806,7 @@
 			frame@17423000 {
 				reg = <0x17423000 0x1000>;
 
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <1>;
 
@@ -5349,7 +6816,7 @@
 			frame@17425000 {
 				reg = <0x17425000 0x1000>;
 
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <2>;
 
@@ -5359,7 +6826,7 @@
 			frame@17427000 {
 				reg = <0x17427000 0x1000>;
 
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <3>;
 
@@ -5369,7 +6836,7 @@
 			frame@17429000 {
 				reg = <0x17429000 0x1000>;
 
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <4>;
 
@@ -5379,7 +6846,7 @@
 			frame@1742b000 {
 				reg = <0x1742b000 0x1000>;
 
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <5>;
 
@@ -5389,7 +6856,7 @@
 			frame@1742d000 {
 				reg = <0x1742d000 0x1000>;
 
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <6>;
 
@@ -5407,9 +6874,9 @@
 				    "drv-1",
 				    "drv-2";
 
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			power-domains = <&cluster_pd>;
 
@@ -5506,6 +6973,16 @@
 			};
 		};
 
+		epss_l3: interconnect@17d90000 {
+			compatible = "qcom,sm8650-epss-l3", "qcom,epss-l3";
+			reg = <0 0x17d90000 0 0x1000>;
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@17d91000 {
 			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x17d91000 0 0x1000>,
@@ -5517,10 +6994,10 @@
 				    "freq-domain2",
 				    "freq-domain3";
 
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "dcvsh-irq-0",
 					  "dcvsh-irq-1",
 					  "dcvsh-irq-2",
@@ -5537,7 +7014,7 @@
 			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
 
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5589,7 +7066,7 @@
 			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b7400 0 0x600>;
 
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5649,7 +7126,7 @@
 				    "llcc_broadcast_base",
 				    "llcc_broadcast_and_base";
 
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
 		nsp_noc: interconnect@320c0000 {
@@ -5665,7 +7142,7 @@
 			compatible = "qcom,sm8650-cdsp-pas";
 			reg = <0x0 0x32300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -5843,14 +7320,14 @@
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5861,14 +7338,14 @@
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5879,14 +7356,14 @@
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5897,14 +7374,14 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5915,14 +7392,14 @@
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5933,18 +7410,6 @@
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu2-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5957,18 +7422,6 @@
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu2-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5981,18 +7434,6 @@
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu3-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6005,18 +7446,6 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu3-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6029,18 +7458,6 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu4-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6053,18 +7470,6 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu4-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6077,18 +7482,6 @@
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu5-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6101,18 +7494,6 @@
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu5-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6125,18 +7506,6 @@
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu6-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6149,18 +7518,6 @@
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu6-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6173,14 +7530,14 @@
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6191,18 +7548,6 @@
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6215,18 +7560,6 @@
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6239,18 +7572,6 @@
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6263,18 +7584,6 @@
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu0-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6287,18 +7596,6 @@
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu1-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6308,19 +7605,17 @@
 		};
 
 		nsphvx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphvx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				nsphvx1-critical {
-					temperature = <110000>;
+				nsphvx0-critical {
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6328,19 +7623,17 @@
 		};
 
 		nsphvx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphvx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphvx1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6348,19 +7641,17 @@
 		};
 
 		nsphmx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6368,19 +7659,17 @@
 		};
 
 		nsphmx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6388,19 +7677,17 @@
 		};
 
 		nsphmx2-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6408,19 +7695,17 @@
 		};
 
 		nsphmx3-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6428,19 +7713,17 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				video-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				video-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6448,19 +7731,17 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				ddr-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				ddr-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6471,14 +7752,14 @@
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				camera0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				camera0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6489,14 +7770,14 @@
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				camera1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				camera1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6507,14 +7788,14 @@
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6535,20 +7816,20 @@
 
 			trips {
 				gpu0_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6568,20 +7849,20 @@
 
 			trips {
 				gpu1_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6601,20 +7882,20 @@
 
 			trips {
 				gpu2_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6634,20 +7915,20 @@
 
 			trips {
 				gpu3_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6667,20 +7948,20 @@
 
 			trips {
 				gpu4_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6700,20 +7981,20 @@
 
 			trips {
 				gpu5_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6733,20 +8014,20 @@
 
 			trips {
 				gpu6_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6766,20 +8047,20 @@
 
 			trips {
 				gpu7_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6789,14 +8070,14 @@
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6807,14 +8088,14 @@
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6825,14 +8106,14 @@
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6843,14 +8124,14 @@
 			thermal-sensors = <&tsens2 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6861,9 +8142,9 @@
 	timer {
 		compatible = "arm,armv8-timer";
 
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750-mtp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 9e3aacad7bda..69cc8f34fd48 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -784,6 +784,28 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	/* Modem crashes after some time with "DOG detects stalled initialization" */
+	status = "fail";
+};
+
 &tlmm {
 	/* reserved for secure world */
 	gpio-reserved-ranges = <36 4>, <74 1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750-qrd.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index f77efab0aef9..e74ce4806362 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -782,6 +782,27 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
 &tlmm {
 	/* reserved for secure world */
 	gpio-reserved-ranges = <36 4>, <74 1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 3bbd7d18598e..980ba1ca23c4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -10,9 +10,12 @@
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -95,11 +98,11 @@
 			compatible = "qcom,oryon";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			power-domains = <&cpu_pd6>;
 			power-domain-names = "psci";
 
-			L2_1: l2-cache {
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				cache-unified;
@@ -111,7 +114,7 @@
 			compatible = "qcom,oryon";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
-			next-level-cache = <&L2_1>;
+			next-level-cache = <&l2_1>;
 			power-domains = <&cpu_pd7>;
 			power-domain-names = "psci";
 		};
@@ -233,53 +236,59 @@
 
 		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster0_pd>;
 			domain-idle-states = <&cluster0_c4>;
 		};
 
 		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster1_pd>;
 			domain-idle-states = <&cluster1_c4>;
 		};
 
 		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_pd>;
+			power-domains = <&cluster1_pd>;
 			domain-idle-states = <&cluster1_c4>;
 		};
 
-		cluster_pd: power-domain-cluster {
+		cluster0_pd: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster1_pd: power-domain-cluster1 {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&cluster_cl5>;
 			power-domains = <&system_pd>;
@@ -516,6 +525,97 @@
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* TODO: smem mailbox in and out */
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 
@@ -542,6 +642,17 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8750-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00406000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,sm8750-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00800000 0x0 0x60000>;
@@ -987,10 +1098,10 @@
 
 				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
 
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
 
-				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -1883,6 +1994,11 @@
 			};
 		};
 
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8750-trng", "qcom,trng";
+			reg = <0x0 0x010c3000 0x0 0x1000>;
+		};
+
 		cnoc_main: interconnect@1500000 {
 			compatible = "qcom,sm8750-cnoc-main";
 			reg = <0x0 0x01500000 0x0 0x16080>;
@@ -1939,12 +2055,259 @@
 			#interconnect-cells = <2>;
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8750-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8750-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8750-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&dsm_partition_1_mem>,
+					<&dsm_partition_2_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8750-adsp-pas", "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <2>;
+				label = "lpass";
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1041 0x20>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06aa0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0x0 0x06ac0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0x0 0x06ae0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06b00000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
 		lpass_ag_noc: interconnect@7e40000 {
 			compatible = "qcom,sm8750-lpass-ag-noc";
 			reg = <0x0 0x07e40000 0x0 0xe080>;
@@ -1966,6 +2329,139 @@
 			#interconnect-cells = <2>;
 		};
 
+		lpass_vamacro: codec@7660000 {
+			compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0x0 0x07660000 0x0 0x2000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@7760000 {
+			compatible = "qcom,sm8750-lpass-lpi-pinctrl",
+				     "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0x0 0x07760000 0x0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic23_default: dmic23-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8750-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;
@@ -1978,6 +2474,24 @@
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8750-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c400000 0x0 0x3000>,
@@ -2888,12 +3402,198 @@
 			#interconnect-cells = <2>;
 		};
 
+		system-cache-controller@24800000 {
+			compatible = "qcom,sm8750-llcc";
+			reg = <0x0 0x24800000 0x0 0x200000>,
+			      <0x0 0x25800000 0x0 0x200000>,
+			      <0x0 0x24c00000 0x0 0x200000>,
+			      <0x0 0x25c00000 0x0 0x200000>,
+			      <0x0 0x26800000 0x0 0x200000>,
+			      <0x0 0x26c00000 0x0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		nsp_noc: interconnect@320c0000 {
 			compatible = "qcom,sm8750-nsp-noc";
 			reg = <0x0 0x320c0000 0x0 0x13080>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 			#interconnect-cells = <2>;
 		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8750-cdsp-pas", "qcom,sm8650-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+			qcom,qmp = <&aoss_qmp>;
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <5>;
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x19c1 0x0>,
+							 <&apps_smmu 0x0c21 0x0>,
+							 <&apps_smmu 0x0c01 0x40>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x0c42 0x0>,
+							 <&apps_smmu 0x19c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c23 0x0>,
+							 <&apps_smmu 0x0c03 0x40>,
+							 <&apps_smmu 0x19c3 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c24 0x0>,
+							 <&apps_smmu 0x0c04 0x40>,
+							 <&apps_smmu 0x19c4 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c25 0x0>,
+							 <&apps_smmu 0x0c05 0x40>,
+							 <&apps_smmu 0x19c5 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x0c46 0x0>,
+							 <&apps_smmu 0x19c6 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c27 0x0>,
+							 <&apps_smmu 0x0c07 0x40>,
+							 <&apps_smmu 0x19c7 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x0c48 0x0>,
+							 <&apps_smmu 0x19c8 0x0>;
+						dma-coherent;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x196c 0x0>,
+							 <&apps_smmu 0x0c2c 0x20>,
+							 <&apps_smmu 0x0c0c 0x40>,
+							 <&apps_smmu 0x19cc 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x196d 0x0>,
+							 <&apps_smmu 0x0c0d 0x20>,
+							 <&apps_smmu 0x0c2e 0x0>,
+							 <&apps_smmu 0x0c4d 0x0>,
+							 <&apps_smmu 0x19cd 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x196e 0x0>,
+							 <&apps_smmu 0x0c0e 0x20>,
+							 <&apps_smmu 0x19ce 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1-crd.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1-crd.dtsi
new file mode 100644
index 000000000000..fdbb92ee8355
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -0,0 +1,1749 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>, <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-CRD";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna45af01", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-pull-up;
+		input-enable;
+	};
+
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1-el2.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1-el2.dtso
new file mode 100644
index 000000000000..380441deca65
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1-el2.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * x1 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+/*
+ * When running under Gunyah, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ *
+ * Additionally, it seems like ITS emulation in Gunyah is broken so we
+ * can't use MSI on some PCIe controllers in EL1. But we can add them
+ * here for EL2.
+ */
+&pcie3 {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+	msi-map = <0 &gic_its 0xb0000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie5 {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+	msi-map = <0 &gic_its 0xd0000 0x10000>;
+};
+
+&pcie6a {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
+
+/*
+ * The "SBSA watchdog" is implemented in software in Gunyah
+ * and can't be used when running in EL2.
+ */
+&sbsa_watchdog {
+	status = "disabled";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 9393c798423e..bf1e614fceec 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -507,6 +507,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -528,6 +529,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -745,8 +747,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -777,7 +779,6 @@
 		reg = <0x08>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK5>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr2_1p15>;
 		vdd33-supply = <&vreg_rtmr2_3p3>;
@@ -786,7 +787,10 @@
 		vddat-supply = <&vreg_rtmr2_1p15>;
 		vddio-supply = <&vreg_rtmr2_1p8>;
 
-		reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
 
 		orientation-switch;
 		retimer-switch;
@@ -832,7 +836,6 @@
 		reg = <0x08>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK3>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr0_1p15>;
 		vdd33-supply = <&vreg_rtmr0_3p3>;
@@ -841,7 +844,10 @@
 		vddat-supply = <&vreg_rtmr0_1p15>;
 		vddio-supply = <&vreg_rtmr0_1p8>;
 
-		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
 
 		retimer-switch;
 		orientation-switch;
@@ -877,6 +883,40 @@
 	};
 };
 
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
 &i2c7 {
 	clock-frequency = <400000>;
 
@@ -887,7 +927,6 @@
 		reg = <0x8>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK4>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr1_1p15>;
 		vdd33-supply = <&vreg_rtmr1_3p3>;
@@ -896,7 +935,10 @@
 		vddat-supply = <&vreg_rtmr1_1p15>;
 		vddio-supply = <&vreg_rtmr1_1p8>;
 
-		reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
 
 		retimer-switch;
 		orientation-switch;
@@ -942,6 +984,7 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp1 {
@@ -950,6 +993,7 @@
 
 &mdss_dp1_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp2 {
@@ -958,6 +1002,7 @@
 
 &mdss_dp2_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &pcie4 {
@@ -1016,9 +1061,22 @@
 };
 
 &pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
 	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
 		pins = "gpio11";
 		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
 	};
 };
 
@@ -1026,6 +1084,10 @@
 	usb0_pwr_1p15_en: usb0-pwr-1p15-en-state {
 		pins = "gpio8";
 		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
 	};
 };
 
@@ -1033,6 +1095,10 @@
 	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
 		pins = "gpio8";
 		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
 	};
 };
 
@@ -1127,6 +1193,22 @@
 &tlmm {
 	gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
 
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	nvme_reg_en: nvme-reg-en-state {
 		pins = "gpio18";
 		function = "gpio";
@@ -1203,6 +1285,20 @@
 		};
 	};
 
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
 		pins = "gpio188";
 		function = "gpio";
@@ -1369,3 +1465,39 @@
 &usb_1_ss2_qmpphy_out {
 	remote-endpoint = <&retimer_ss2_ss_in>;
 };
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
new file mode 100644
index 000000000000..be65fafafa73
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6 (OLED)";
+	compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 88b3ddc891ed..5cc6a63d1ef6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -1,1134 +1,60 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Linaro Limited
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
 
 / {
-	model = "Lenovo ThinkPad T14s Gen 6";
-	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
-	chassis-type = "laptop";
-
-	wcd938x: audio-codec {
-		compatible = "qcom,wcd9385-codec";
-
-		pinctrl-0 = <&wcd_default>;
-		pinctrl-names = "default";
-
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-
-		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
-		vdd-buck-supply = <&vreg_l15b_1p8>;
-		vdd-rxtx-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l15b_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob1>;
-
-		#sound-dai-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&hall_int_n_default>;
-		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Display-adjacent port */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-					};
-				};
-			};
-		};
+	model = "Lenovo ThinkPad T14s Gen 6 (LCD)";
+	compatible = "lenovo,thinkpad-t14s-lcd", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
 
-		/* User-adjacent port */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 4266537>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
 		pinctrl-names = "default";
-
-		regulator-boot-on;
 	};
 
-	vreg_nvme: regulator-nvme {
+	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
 
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
-		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
 
 		regulator-boot-on;
 	};
-
-	vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound {
-		compatible = "qcom,x1e80100-sndcard";
-		model = "X1E80100-LENOVO-Thinkpad-T14s";
-		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
-				"SpkrRight IN", "WSA WSA_SPK2 OUT",
-				"IN1_HPHL", "HPHL_OUT",
-				"IN2_HPHR", "HPHR_OUT",
-				"AMIC2", "MIC BIAS2",
-				"VA DMIC0", "MIC BIAS1",
-				"VA DMIC1", "MIC BIAS1",
-				"VA DMIC0", "VA MIC BIAS1",
-				"VA DMIC1", "VA MIC BIAS1",
-				"TX SWR_INPUT1", "ADC2_OUTPUT";
-
-		wcd-playback-dai-link {
-			link-name = "WCD Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wcd-capture-dai-link {
-			link-name = "WCD Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wsa-dai-link {
-			link-name = "WSA Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		va-dai-link {
-			link-name = "VA Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
-			};
-
-			codec {
-				sound-dai = <&lpass_vamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vph_pwr>;
-		vdd-bob2-supply = <&vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1b_1p8: ldo1 {
-			regulator-name = "vreg_l1b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1256000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "/*(DEBLOBBED)*/";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* ELAN06E2 or ELAN06E3 */
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		wakeup-source;
-	};
-
-	/* SYNA8022 or SYNA8024 */
-	touchpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-
-		hid-descr-addr = <0x20>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		wakeup-source;
-	};
-
-	/* ELAN06F1 or SYNA06F2 */
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c5 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	eusb5_repeater: redriver@43 {
-		compatible = "nxp,ptn3222";
-		reg = <0x43>;
-		#phy-cells = <0>;
-
-		vdd3v3-supply = <&vreg_l13b_3p0>;
-		vdd1v8-supply = <&vreg_l4b_1p8>;
-
-		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&eusb5_reset_n>;
-		pinctrl-names = "default";
-	};
-
-	eusb3_repeater: redriver@47 {
-		compatible = "nxp,ptn3222";
-		reg = <0x47>;
-		#phy-cells = <0>;
-
-		vdd3v3-supply = <&vreg_l13b_3p0>;
-		vdd1v8-supply = <&vreg_l4b_1p8>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&eusb3_reset_n>;
-		pinctrl-names = "default";
-	};
-
-	eusb6_repeater: redriver@4f {
-		compatible = "nxp,ptn3222";
-		reg = <0x4f>;
-		#phy-cells = <0>;
-
-		vdd3v3-supply = <&vreg_l13b_3p0>;
-		vdd1v8-supply = <&vreg_l4b_1p8>;
-
-		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&eusb6_reset_n>;
-		pinctrl-names = "default";
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	/* ILIT2911 or GTCH1563 */
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-
-	/* TODO: second-sourced touchscreen @ 0x41 */
-};
-
-&lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
-		pins = "gpio12";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-};
-
-&lpass_vamacro {
-	pinctrl-0 = <&dmic01_default>;
-	pinctrl-names = "default";
-
-	vdd-micb-supply = <&vreg_l1b_1p8>;
-	qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
-	/delete-property/ #sound-dai-cells;
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "edp-panel";
-			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-			power-supply = <&vreg_edp_3p3>;
-
-			pinctrl-0 = <&edp_bl_en>;
-			pinctrl-names = "default";
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-0 = <&pcie6a_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
+&panel {
+	backlight = <&backlight>;
 };
 
 &pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
 		function = "normal";
-		power-source = <1>;
-		input-disable;
-		output-enable;
 	};
 };
 
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "/*(DEBLOBBED)*/",
-			"/*(DEBLOBBED)*/";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "/*(DEBLOBBED)*/",
-			"/*(DEBLOBBED)*/";
-
-	status = "okay";
-};
-
-&smb2360_0 {
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
-	status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&swr0 {
-	status = "okay";
-
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
-	pinctrl-names = "default";
-
-	/* WSA8845, Left Speaker */
-	left_spkr: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Right Speaker */
-	right_spkr: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&swr1 {
-	status = "okay";
-
-	/* WCD9385 RX */
-	wcd_rx: codec@0,4 {
-		compatible = "sdw20217010d00";
-		reg = <0 4>;
-		qcom,rx-port-mapping = <1 2 3 4 5>;
-	};
-};
-
-&swr2 {
-	status = "okay";
-
-	/* WCD9385 TX */
-	wcd_tx: codec@0,3 {
-		compatible = "sdw20217010d00";
-		reg = <0 3>;
-		qcom,tx-port-mapping = <2 2 3 4>;
-	};
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <72 2>, /* Secure EC I2C connection (?) */
-			       <238 1>; /* UFS Reset */
-
-	eusb3_reset_n: eusb3-reset-n-state {
-		pins = "gpio6";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	eusb5_reset_n: eusb5-reset-n-state {
-		pins = "gpio7";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	eusb6_reset_n: eusb6-reset-n-state {
-		pins = "gpio184";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
 	};
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	ts0_default: ts0-default-state {
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-disable;
-	};
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-};
-
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l2j_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
 };
 
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l2j_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
-
-	phys = <&eusb5_repeater>;
-
-	status = "okay";
-};
-
-&usb_mp {
-	status = "okay";
-};
-
-&usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
-
-	phys = <&eusb6_repeater>;
-
-	status = "okay";
-};
-
-&usb_mp_hsphy1 {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
-
-	phys = <&eusb3_repeater>;
-
-	status = "okay";
-};
-
-&usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l3c_0p8>;
-
-	status = "okay";
-};
-
-&usb_mp_qmpphy1 {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l3c_0p8>;
-
+&pmk8550_pwm {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
new file mode 100644
index 000000000000..aafd73c51b34
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -0,0 +1,1576 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6";
+	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+		mux-controls = <&us_euro_mux_ctrl>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	/* two muxes together support CTIA and OMTP switching */
+	us_euro_mux_ctrl: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl-0 = <&us_euro_hs_sel>;
+		pinctrl-names = "default";
+		mux-supply = <&vreg_l16b_2p5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN_RCM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-Thinkpad-T14s";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p5: ldo16 {
+			regulator-name = "vreg_l16b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* ELAN06E2 or ELAN06E3 */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* SYNA8022 or SYNA8024 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* ELAN06F1 or SYNA06F2 */
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ILIT2911 or GTCH1563 */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+
+	/* TODO: second-sourced touchscreen @ 0x41 */
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel: panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio68";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 984713c95884..beea84c674df 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -19,6 +19,10 @@
 	compatible = "asus,vivobook-s15", "qcom,x1e80100";
 	chassis-type = "laptop";
 
+	aliases {
+		serial1 = &uart14;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&hall_int_n_default>;
@@ -153,6 +157,107 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -192,12 +297,33 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l14b_3p0: ldo14 {
 			regulator-name = "vreg_l14b_3p0";
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -209,6 +335,13 @@
 		vdd-l3-supply = <&vreg_s1f_0p7>;
 		vdd-s4-supply = <&vph_pwr>;
 
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_s4c_1p8: smps4 {
 			regulator-name = "vreg_s4c_1p8";
 			regulator-min-microvolt = <1856000>;
@@ -330,8 +463,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -401,7 +534,49 @@
 		wakeup-source;
 	};
 
-	/* EC? @ 0x5b, 0x76 */
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* EC @ 0x76 */
 };
 
 &i2c7 {
@@ -416,7 +591,6 @@
 };
 
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
 	status = "okay";
@@ -476,6 +650,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -563,6 +754,30 @@
 		bias-disable;
 	};
 
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
 	hall_int_n_default: hall-int-n-state {
 		pins = "gpio92";
 		function = "gpio";
@@ -633,6 +848,44 @@
 		function = "gpio";
 		bias-disable;
 	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcn_wlan_en: wcn-wlan-en-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &usb_1_ss0_hsphy {
@@ -698,3 +951,56 @@
 &usb_1_ss1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 347b298d2037..f1d00f67106f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -5,1278 +5,14 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
 #include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "x1-crd.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
 	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
-
-	aliases {
-		serial0 = &uart21;
-	};
-
-	wcd938x: audio-codec {
-		compatible = "qcom,wcd9385-codec";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcd_default>;
-
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-
-		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
-		vdd-buck-supply = <&vreg_l15b_1p8>;
-		vdd-rxtx-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l15b_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob1>;
-
-		#sound-dai-cells = <1>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&hall_int_n_default>;
-		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
-
-		/* Left-side rear port */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-					};
-				};
-			};
-		};
-
-		/* Left-side front port */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-			};
-		};
-
-		/* Right-side port */
-		connector@2 {
-			compatible = "usb-c-connector";
-			reg = <2>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss2_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss2_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	sound {
-		compatible = "qcom,x1e80100-sndcard";
-		model = "X1E80100-CRD";
-		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
-				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
-				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
-				"IN1_HPHL", "HPHL_OUT",
-				"IN2_HPHR", "HPHR_OUT",
-				"AMIC2", "MIC BIAS2",
-				"VA DMIC0", "MIC BIAS3",
-				"VA DMIC1", "MIC BIAS3",
-				"VA DMIC2", "MIC BIAS1",
-				"VA DMIC3", "MIC BIAS1",
-				"VA DMIC0", "VA MIC BIAS3",
-				"VA DMIC1", "VA MIC BIAS3",
-				"VA DMIC2", "VA MIC BIAS1",
-				"VA DMIC3", "VA MIC BIAS1",
-				"TX SWR_INPUT1", "ADC2_OUTPUT";
-
-		wcd-playback-dai-link {
-			link-name = "WCD Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wcd-capture-dai-link {
-			link-name = "WCD Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wsa-dai-link {
-			link-name = "WSA Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&left_woofer>, <&left_tweeter>,
-					    <&swr0 0>, <&lpass_wsamacro 0>,
-					    <&right_woofer>, <&right_tweeter>,
-					    <&swr3 0>, <&lpass_wsa2macro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		va-dai-link {
-			link-name = "VA Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
-			};
-
-			codec {
-				sound-dai = <&lpass_vamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_misc_3p3: regulator-misc-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_MISC_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&misc_3p3_reg_en>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vreg_nvme: regulator-nvme {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nvme_reg_en>;
-
-		regulator-boot-on;
-	};
-
-	vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vreg_wwan: regulator-wwan {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDX_VPH_PWR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&wwan_sw_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vph_pwr>;
-		vdd-bob2-supply = <&vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1b_1p8: ldo1 {
-			regulator-name = "vreg_l1b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5b_3p0: ldo5 {
-			regulator-name = "vreg_l5b_3p0";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b_2p8: ldo7 {
-			regulator-name = "vreg_l7b_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l16b_2p9: ldo16 {
-			regulator-name = "vreg_l16b_2p9";
-			regulator-min-microvolt = <2912000>;
-			regulator-max-microvolt = <2912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f_1p0: ldo1 {
-			regulator-name = "vreg_l1f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f_1p0: ldo2 {
-			regulator-name = "vreg_l2f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f_1p0: ldo3 {
-			regulator-name = "vreg_l3f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-
-		vreg_s1i_0p9: smps1 {
-			regulator-name = "vreg_s1i_0p9";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2i_1p0: smps2 {
-			regulator-name = "vreg_s2i_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "/*(DEBLOBBED)*/";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&tpad_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_1p8>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
-		pins = "gpio12";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
-		pins = "gpio13";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-};
-
-&lpass_vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
-	pinctrl-names = "default";
-
-	vdd-micb-supply = <&vreg_l1b_1p8>;
-	qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
-	/delete-property/ #sound-dai-cells;
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "samsung,atna45af01", "samsung,atna33xc20";
-			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-			power-supply = <&vreg_edp_3p3>;
-
-			pinctrl-0 = <&edp_bl_en>;
-			pinctrl-names = "default";
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie5 {
-	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_wwan>;
-
-	pinctrl-0 = <&pcie5_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie5_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie6a_default>;
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pm8550ve_8_gpios {
-	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-disable;
-		output-enable;
-		drive-push-pull;
-		power-source = <1>; /* 1.8 V */
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-};
-
-&pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		input-disable;
-		output-enable;
-	};
-};
-
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "/*(DEBLOBBED)*/",
-			"/*(DEBLOBBED)*/";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "/*(DEBLOBBED)*/",
-			"/*(DEBLOBBED)*/";
-
-	status = "okay";
-};
-
-&smb2360_0 {
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
-	status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&smb2360_2 {
-	status = "okay";
-};
-
-&smb2360_2_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l8b_3p0>;
-};
-
-&swr0 {
-	status = "okay";
-
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
-	pinctrl-names = "default";
-
-	/* WSA8845, Left Woofer */
-	left_woofer: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Left Tweeter */
-	left_tweeter: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&swr1 {
-	status = "okay";
-
-	/* WCD9385 RX */
-	wcd_rx: codec@0,4 {
-		compatible = "sdw20217010d00";
-		reg = <0 4>;
-		qcom,rx-port-mapping = <1 2 3 4 5>;
-	};
-};
-
-&swr2 {
-	status = "okay";
-
-	/* WCD9385 TX */
-	wcd_tx: codec@0,3 {
-		compatible = "sdw20217010d00";
-		reg = <0 3>;
-		qcom,tx-port-mapping = <2 2 3 4>;
-	};
-};
-
-&swr3 {
-	status = "okay";
-
-	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
-	pinctrl-names = "default";
-
-	/* WSA8845, Right Woofer */
-	right_woofer: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Right Tweeter */
-	right_tweeter: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <238 1>; /* UFS Reset */
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-disable;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie5_default: pcie5-default-state {
-		clkreq-n-pins {
-			pins = "gpio150";
-			function = "pcie5_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio149";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio151";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-disable;
-	};
-
-	ts0_default: ts0-default-state {
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-disable;
-		};
-
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	wwan_sw_en: wwan-sw-en-state {
-		pins = "gpio221";
-		function = "gpio";
-		drive-strength = <4>;
-		bias-disable;
-	};
-};
-
-&uart21 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l2j_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l2j_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_2_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l2j_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss2 {
-	status = "okay";
-};
-
-&usb_1_ss2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss2_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss2_hs_in>;
 };
 
-&usb_1_ss2_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+&gpu_zap_shader {
+	firmware-name = "/*(DEBLOBBED)*/";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index ebb77ea804c9..2944e945f49a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -359,6 +359,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -380,6 +381,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l17b_2p5: ldo17 {
@@ -612,7 +614,6 @@
 		reg = <0x08>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK3>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr0_1p15>;
 		vdd33-supply = <&vreg_rtmr0_3p3>;
@@ -676,7 +677,6 @@
 		reg = <0x8>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK4>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr1_1p15>;
 		vdd33-supply = <&vreg_rtmr1_3p3>;
@@ -770,6 +770,24 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
new file mode 100644
index 000000000000..0be36224637d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "x1e80100-hp-omnibook-x14.dts"
+
+/ {
+	model = "HP EliteBook Ultra G1q";
+	compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "/*(DEBLOBBED)*/";
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "/*(DEBLOBBED)*/",
+			"/*(DEBLOBBED)*/";
+};
+
+&sound {
+	model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 1d11454f32e9..32796653a5fa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -150,15 +150,7 @@
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&retimer_ss1_ss_out>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					pmic_glink_ss1_con_sbu_in: endpoint {
-						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 					};
 				};
 			};
@@ -174,7 +166,7 @@
 		};
 	};
 
-	sound {
+	sound: sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-HP-OMNIBOOK-X14";
 		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
@@ -370,54 +362,6 @@
 		regulator-boot-on;
 	};
 
-	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_1P15";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-
-		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_1P8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR1_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
 	vreg_vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 
@@ -633,6 +577,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -654,6 +599,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -871,8 +817,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -1025,64 +971,6 @@
 	};
 };
 
-&i2c7 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	typec-mux@8 {
-		compatible = "parade,ps8830";
-		reg = <0x8>;
-
-		clocks = <&rpmhcc RPMH_RF_CLK4>;
-
-		vdd-supply = <&vreg_rtmr1_1p15>;
-		vdd33-supply = <&vreg_rtmr1_3p3>;
-		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
-		vddar-supply = <&vreg_rtmr1_1p15>;
-		vddat-supply = <&vreg_rtmr1_1p15>;
-		vddio-supply = <&vreg_rtmr1_1p8>;
-
-		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&rtmr1_default>;
-		pinctrl-names = "default";
-
-		orientation-switch;
-		retimer-switch;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				retimer_ss1_ss_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss1_ss_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				retimer_ss1_ss_in: endpoint {
-					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				retimer_ss1_con_sbu_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
-				};
-			};
-
-		};
-	};
-};
-
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -1139,6 +1027,7 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp1 {
@@ -1147,10 +1036,10 @@
 
 &mdss_dp1_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
 	status = "okay";
@@ -1352,18 +1241,22 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
+};
 
+&smb2360_1 {
 	status = "okay";
 };
 
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
-
-	status = "okay";
 };
 
 &swr0 {
@@ -1425,14 +1318,6 @@
 			       <72 2>, /* Secure EC I2C connection (?) */
 			       <238 1>; /* UFS Reset */
 
-	bt_en_default: bt-en-sleep {
-		pins = "gpio116";
-		function = "gpio";
-		output-low;
-		bias-disable;
-		drive-strength = <16>;
-	};
-
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio70";
 		function = "gpio";
@@ -1513,13 +1398,6 @@
 		};
 	};
 
-	rtmr1_default: rtmr1-reset-n-active-state {
-		pins = "gpio176";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -1541,27 +1419,6 @@
 		};
 	};
 
-	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
-		pins = "gpio188";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
-		pins = "gpio175";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
-		pins = "gpio186";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";
@@ -1664,7 +1521,7 @@
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&retimer_ss1_ss_in>;
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
 
 &usb_mp {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 86ecce4d7249..a7984636bb6f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -72,7 +72,15 @@
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -101,7 +109,15 @@
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -130,7 +146,15 @@
 					reg = <1>;
 
 					pmic_glink_ss2_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
 					};
 				};
 			};
@@ -152,7 +176,11 @@
 		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
 				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
 				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TweeterRight IN", "WSA2 WSA_SPK2 OUT";
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
 
 		wsa-dai-link {
 			link-name = "WSA Playback";
@@ -222,6 +250,150 @@
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 
@@ -290,6 +462,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l14b_3p0: ldo14 {
@@ -304,8 +477,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
-
 	};
 
 	regulators-1 {
@@ -508,8 +681,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -562,6 +735,178 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -609,8 +954,34 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
 	status = "okay";
@@ -674,8 +1045,6 @@
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
-
-		qcom,ath12k-calibration-variant = "LES790";
 	};
 };
 
@@ -698,6 +1067,37 @@
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -708,6 +1108,17 @@
 	};
 };
 
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -916,6 +1327,20 @@
 		};
 	};
 
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -937,6 +1362,47 @@
 		};
 	};
 
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &uart21 {
@@ -973,7 +1439,7 @@
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -1005,7 +1471,7 @@
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };
 
 &usb_1_ss2_hsphy {
@@ -1037,5 +1503,5 @@
 };
 
 &usb_1_ss2_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+	remote-endpoint = <&retimer_ss2_ss_in>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 233cc0b50768..4fb6dc6b52df 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -510,6 +510,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b: ldo13 {
@@ -531,6 +532,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b: ldo16 {
@@ -792,7 +794,6 @@
 		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK3>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr0_1p15>;
 		vdd33-supply = <&vreg_rtmr0_3p3>;
@@ -878,7 +879,6 @@
 		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
 
 		clocks = <&rpmhcc RPMH_RF_CLK4>;
-		clock-names = "xo";
 
 		vdd-supply = <&vreg_rtmr1_1p15>;
 		vdd33-supply = <&vreg_rtmr1_3p3>;
@@ -944,8 +944,25 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index d7a2a2b8fc6c..e3888bc143a0 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -110,7 +110,7 @@
 			};
 		};
 
-		pmc8380-6-thermal {
+		pmc8380_6_thermal: pmc8380-6-thermal {
 			polling-delay-passive = <100>;
 
 			thermal-sensors = <&pmc8380_6_temp_alarm>;
@@ -223,8 +223,8 @@
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
-			/* Not yet sure what blocks access */
-			status = "reserved";
+			qcom,no-alarm; /* alarm owned by ADSP */
+			qcom,uefi-rtc-info;
 		};
 
 		pmk8550_sdam_2: nvram@7100 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 1d856512847a..7ffa5fa5aff4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -17,6 +17,7 @@
 
 	aliases {
 		serial0 = &uart21;
+		serial1 = &uart14;
 	};
 
 	wcd938x: audio-codec {
@@ -281,6 +282,42 @@
 		regulator-boot-on;
 	};
 
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	usb-1-ss0-sbu-mux {
 		compatible = "onnn,fsusb42", "gpio-sbu-mux";
 
@@ -337,6 +374,65 @@
 			};
 		};
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -437,6 +533,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -458,6 +555,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -675,8 +773,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -751,6 +849,7 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp1 {
@@ -759,6 +858,7 @@
 
 &mdss_dp1_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp2 {
@@ -767,10 +867,10 @@
 
 &mdss_dp2_out {
 	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
 	status = "okay";
@@ -825,6 +925,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -1135,6 +1252,37 @@
 		bias-disable;
 		output-low;
 	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &uart21 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 4936fa5b98ff..a8eb4c5fe99f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -71,8 +72,8 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd0>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 
 			l2_0: l2-cache {
@@ -88,8 +89,8 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd1>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -99,8 +100,8 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd2>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -110,8 +111,8 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd3>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -121,8 +122,8 @@
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd4>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 
 			l2_1: l2-cache {
@@ -138,8 +139,8 @@
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd5>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -149,8 +150,8 @@
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd6>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -160,8 +161,8 @@
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd7>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -171,8 +172,8 @@
 			reg = <0x0 0x20000>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd8>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 
 			l2_2: l2-cache {
@@ -188,8 +189,8 @@
 			reg = <0x0 0x20100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd9>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -199,8 +200,8 @@
 			reg = <0x0 0x20200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd10>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -210,8 +211,8 @@
 			reg = <0x0 0x20300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd11>;
-			power-domain-names = "psci";
+			power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 			cpu-idle-states = <&cluster_c4>;
 		};
 
@@ -252,7 +253,7 @@
 				};
 			};
 
-			cluster2 {
+			cpu_map_cluster2: cluster2 {
 				core0 {
 					cpu = <&cpu8>;
 				};
@@ -322,6 +323,21 @@
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 			qcom,dload-mode = <&tcsr 0x19000>;
 		};
+
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>;
+			mbox-names = "tx", "rx";
+			shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	clk_virt: interconnect-0 {
@@ -863,8 +879,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -899,8 +915,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -935,8 +951,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -971,8 +987,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1007,8 +1023,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1043,8 +1059,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1079,8 +1095,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1115,8 +1131,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1151,8 +1167,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1187,8 +1203,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1223,8 +1239,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1259,8 +1275,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1295,8 +1311,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
@@ -1320,8 +1336,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1356,8 +1372,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1392,8 +1408,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1428,8 +1444,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1508,8 +1524,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1544,8 +1560,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1580,8 +1596,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1616,8 +1632,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1652,8 +1668,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1688,8 +1704,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1724,8 +1740,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1760,8 +1776,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1796,8 +1812,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1832,8 +1848,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1868,8 +1884,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1904,8 +1920,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1940,8 +1956,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -1976,8 +1992,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2012,8 +2028,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
@@ -2037,8 +2053,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2073,8 +2089,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2152,8 +2168,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2188,8 +2204,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2224,8 +2240,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2260,8 +2276,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2296,8 +2312,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2332,8 +2348,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
@@ -2357,8 +2373,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2393,8 +2409,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2429,8 +2445,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2465,8 +2481,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2501,8 +2517,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2537,8 +2553,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2573,8 +2589,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2609,8 +2625,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2645,8 +2661,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2681,8 +2697,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -2717,8 +2733,8 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
@@ -3125,7 +3141,7 @@
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
 			reg = <0x0 0x01bd0000 0x0 0x3000>,
-			      <0x0 0x78000000 0x0 0xf1d>,
+			      <0x0 0x78000000 0x0 0xf20>,
 			      <0x0 0x78000f40 0x0 0xa8>,
 			      <0x0 0x78001000 0x0 0x1000>,
 			      <0x0 0x78100000 0x0 0x100000>,
@@ -3194,8 +3210,8 @@
 
 			interconnects = <&pcie_north_anoc MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3209,6 +3225,10 @@
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555
+						     0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>;
+
 			operating-points-v2 = <&pcie3_opp_table>;
 
 			status = "disabled";
@@ -3395,8 +3415,8 @@
 
 			interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3411,6 +3431,9 @@
 			phys = <&pcie6a_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
 			status = "disabled";
 		};
 
@@ -3522,8 +3545,8 @@
 
 			interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3538,6 +3561,8 @@
 			phys = <&pcie5_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+
 			status = "disabled";
 		};
 
@@ -3558,8 +3583,10 @@
 				      "pipe",
 				      "pipediv2";
 
-			resets = <&gcc GCC_PCIE_5_PHY_BCR>;
-			reset-names = "phy";
+			resets = <&gcc GCC_PCIE_5_PHY_BCR>,
+				 <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
 
 			assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
 			assigned-clock-rates = <100000000>;
@@ -3646,8 +3673,8 @@
 
 			interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3662,6 +3689,8 @@
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+
 			status = "disabled";
 
 			pcie4_port0: pcie@0 {
@@ -3692,8 +3721,10 @@
 				      "pipe",
 				      "pipediv2";
 
-			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
-			reset-names = "phy";
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>,
+				 <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
 
 			assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>;
 			assigned-clock-rates = <100000000>;
@@ -3747,65 +3778,88 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_microcode_mem>;
 			};
 
 			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
+				compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+				opp-1250000000 {
+					opp-hz = /bits/ 64 <1250000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+				};
+
+				opp-1175000000 {
+					opp-hz = /bits/ 64 <1175000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+				};
 
 				opp-1100000000 {
 					opp-hz = /bits/ 64 <1100000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-peak-kBps = <16500000>;
+					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
 				};
 
 				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82b5ffd>;
 				};
 
 				opp-925000000 {
 					opp-hz = /bits/ 64 <925000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82b5ffd>;
 				};
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <12449219>;
+					qcom,opp-acd-level = <0xa82c5ffd>;
 				};
 
 				opp-744000000 {
 					opp-hz = /bits/ 64 <744000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <10687500>;
+					qcom,opp-acd-level = <0x882e5ffd>;
 				};
 
 				opp-687000000 {
 					opp-hz = /bits/ 64 <687000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0x882e5ffd>;
 				};
 
 				opp-550000000 {
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <6074219>;
+					qcom,opp-acd-level = <0xc0285ffd>;
 				};
 
 				opp-390000000 {
 					opp-hz = /bits/ 64 <390000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <3000000>;
+					qcom,opp-acd-level = <0xc0285ffd>;
 				};
 
 				opp-300000000 {
 					opp-hz = /bits/ 64 <300000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
 					opp-peak-kBps = <2136719>;
+					qcom,opp-acd-level = <0xc02b5ffd>;
 				};
 			};
 		};
@@ -4694,8 +4748,8 @@
 
 			interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -4794,8 +4848,8 @@
 
 			interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -4814,6 +4868,8 @@
 				snps,dis-u1-entry-quirk;
 				snps,dis-u2-entry-quirk;
 
+				dma-coherent;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -4879,8 +4935,8 @@
 
 			interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -5053,8 +5109,8 @@
 
 			interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -7933,6 +7989,20 @@
 			dma-coherent;
 		};
 
+		pcie_smmu: iommu@15400000 {
+			compatible = "arm,smmu-v3";
+			reg = <0 0x15400000 0 0x80000>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "gerror",
+					  "cmdq-sync";
+			dma-coherent;
+			status = "reserved"; /* Controlled by Gunyah. */
+		};
+
 		intc: interrupt-controller@17000000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0x17000000 0 0x10000>,     /* GICD */
@@ -7959,6 +8029,13 @@
 			};
 		};
 
+		cpucp_mbox: mailbox@17430000 {
+			compatible = "qcom,x1e80100-cpucp-mbox";
+			reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		apps_rsc: rsc@17500000 {
 			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x17500000 0 0x10000>,
@@ -8142,6 +8219,32 @@
 			};
 		};
 
+		sram: sram@18b4e000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x18b4e000 0x0 0x400>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x18b4e000 0x400>;
+
+			cpu_scp_lpri0: scp-sram-section@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x200>;
+			};
+
+			cpu_scp_lpri1: scp-sram-section@200 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x200 0x200>;
+			};
+		};
+
+		sbsa_watchdog: watchdog@1c840000 {
+			compatible = "arm,sbsa-gwdt";
+			reg = <0 0x1c840000 0 0x1000>,
+			      <0 0x1c850000 0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pmu@24091000 {
 			compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
@@ -8199,7 +8302,7 @@
 		};
 
 		/* cluster0 */
-		pmu@240b3400 {
+		bwmon_cluster0: pmu@240b3400 {
 			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b3400 0 0x600>;
 
@@ -8209,6 +8312,19 @@
 					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		/* cluster2 */
+		bwmon_cluster2: pmu@240b5400 {
+			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b5400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
 
 			cpu_bwmon_opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -8239,19 +8355,6 @@
 			};
 		};
 
-		/* cluster2 */
-		pmu@240b5400 {
-			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
-			reg = <0 0x240b5400 0 0x600>;
-
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-
-			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
-
-			operating-points-v2 = <&cpu_bwmon_opp_table>;
-		};
-
 		/* cluster1 */
 		pmu@240b6400 {
 			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
@@ -8457,33 +8560,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu0-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8491,25 +8580,11 @@
 		};
 
 		cpu0-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8517,25 +8592,11 @@
 		};
 
 		cpu0-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8543,25 +8604,11 @@
 		};
 
 		cpu0-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8569,25 +8616,11 @@
 		};
 
 		cpu0-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8595,25 +8628,11 @@
 		};
 
 		cpu0-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8621,25 +8640,11 @@
 		};
 
 		cpu0-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8647,25 +8652,11 @@
 		};
 
 		cpu0-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8676,15 +8667,9 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8694,15 +8679,9 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8719,7 +8698,7 @@
 				};
 
 				mem-critical {
-					temperature = <125000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -8727,15 +8706,19 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
 				trip-point0 {
-					temperature = <125000>;
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
@@ -8751,33 +8734,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu1-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8785,25 +8754,11 @@
 		};
 
 		cpu1-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8811,25 +8766,11 @@
 		};
 
 		cpu1-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8837,25 +8778,11 @@
 		};
 
 		cpu1-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8863,25 +8790,11 @@
 		};
 
 		cpu1-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8889,25 +8802,11 @@
 		};
 
 		cpu1-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8915,25 +8814,11 @@
 		};
 
 		cpu1-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8941,25 +8826,11 @@
 		};
 
 		cpu1-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -8970,15 +8841,9 @@
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -8988,15 +8853,9 @@
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9013,33 +8872,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu2-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9047,25 +8892,11 @@
 		};
 
 		cpu2-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9073,25 +8904,11 @@
 		};
 
 		cpu2-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9099,25 +8916,11 @@
 		};
 
 		cpu2-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9125,25 +8928,11 @@
 		};
 
 		cpu2-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9151,25 +8940,11 @@
 		};
 
 		cpu2-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9177,25 +8952,11 @@
 		};
 
 		cpu2-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9203,25 +8964,11 @@
 		};
 
 		cpu2-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9232,15 +8979,9 @@
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9250,15 +8991,9 @@
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9275,8 +9010,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9293,8 +9028,8 @@
 				};
 
 				nsp0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9311,8 +9046,8 @@
 				};
 
 				nsp1-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9329,8 +9064,8 @@
 				};
 
 				nsp2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9347,33 +9082,34 @@
 				};
 
 				nsp3-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		gpuss-0-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 5>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9381,25 +9117,26 @@
 		};
 
 		gpuss-1-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 6>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9407,25 +9144,26 @@
 		};
 
 		gpuss-2-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 7>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss2_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9433,25 +9171,26 @@
 		};
 
 		gpuss-3-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 8>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss3_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9459,25 +9198,26 @@
 		};
 
 		gpuss-4-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 9>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss4_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9485,25 +9225,26 @@
 		};
 
 		gpuss-5-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 10>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss5_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9511,25 +9252,26 @@
 		};
 
 		gpuss-6-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 11>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss6_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9537,25 +9279,26 @@
 		};
 
 		gpuss-7-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 12>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss7_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -9574,7 +9317,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -9592,7 +9335,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1p42100-crd.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
new file mode 100644
index 000000000000..cf07860a63e9
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1-crd.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1P42100 CRD";
+	compatible = "qcom,x1p42100-crd", "qcom,x1p42100";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/qcom/x1p42100.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1p42100.dtsi
new file mode 100644
index 000000000000..27f479010bc3
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/qcom/x1p42100.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* X1P42100 is heavily based on X1E80100, with some meaningful differences */
+#include "x1e80100.dtsi"
+
+/delete-node/ &bwmon_cluster0;
+/delete-node/ &cluster_pd2;
+/delete-node/ &cpu_map_cluster2;
+/delete-node/ &cpu8;
+/delete-node/ &cpu9;
+/delete-node/ &cpu10;
+/delete-node/ &cpu11;
+/delete-node/ &cpu_pd8;
+/delete-node/ &cpu_pd9;
+/delete-node/ &cpu_pd10;
+/delete-node/ &cpu_pd11;
+/delete-node/ &pcie3_phy;
+
+&gcc {
+	compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
+};
+
+/* The GPU is physically different and will be brought up later */
+&gpu {
+	/delete-property/ compatible;
+};
+
+&gpucc {
+	compatible = "qcom,x1p42100-gpucc";
+};
+
+/* PCIe3 has half the lanes compared to X1E80100 */
+&pcie3 {
+	num-lanes = <4>;
+};
+
+&pcie6a_phy {
+	compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
+};
+
+&soc {
+	/* The PCIe3 PHY on X1P42100 uses a different IP block */
+	pcie3_phy: phy@1bd4000 {
+		compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
+		reg = <0x0 0x01bd4000 0x0 0x2000>,
+		      <0x0 0x01bd6000 0x0 0x2000>;
+
+		clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+			 <&tcsr TCSR_PCIE_8L_CLKREF_EN>,
+			 <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_3_PIPE_CLK>,
+			 <&gcc GCC_PCIE_3_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
+
+		resets = <&gcc GCC_PCIE_3_PHY_BCR>,
+			 <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>;
+		reset-names = "phy",
+			      "phy_nocsr";
+
+		assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>;
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie3_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/Makefile
index d25e665ee4bf..aa7f996c0546 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/Makefile
@@ -94,6 +94,11 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single.dtb
 r8a779g2-white-hawk-single-ard-audio-da7212-dtbs := r8a779g2-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb
 
+DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb
+r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb
+
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single.dtb
 r8a779g3-white-hawk-single-ard-audio-da7212-dtbs := r8a779g3-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single-ard-audio-da7212.dtb
@@ -152,6 +157,8 @@ dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
 
+dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb
+
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 1489bc8d2f4e..d40a7224f9c3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -300,7 +300,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupts-extended = <&gpio1 27 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index f1613bfd1632..95ff69339991 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -2588,13 +2588,20 @@
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2672,13 +2679,20 @@
 		isp1: isp@fed20000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 613>;
+			reg = <0 0xfed20000 0 0x10000>, <0 0xfee00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-			resets = <&cpg 613>;
+			resets = <&cpg 613>, <&cpg 17>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2756,13 +2770,20 @@
 		isp2: isp@fed30000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed30000 0 0x10000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 614>;
+			reg = <0 0xfed30000 0 0x10000>, <0 0xfef00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 614>, <&cpg CPG_MOD 18>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
-			resets = <&cpg 614>;
+			resets = <&cpg 614>, <&cpg 18>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx2>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2840,13 +2861,20 @@
 		isp3: isp@fed40000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed40000 0 0x10000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 615>;
+			reg = <0 0xfed40000 0 0x10000>, <0 0xfe400000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 615>, <&cpg CPG_MOD 19>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
-			resets = <&cpg 615>;
+			resets = <&cpg 615>, <&cpg 19>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx3>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779f4.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
index ebed41892df3..b216d605c321 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
@@ -10,3 +10,20 @@
 / {
 	compatible = "renesas,r8a779f4", "renesas,r8a779f0";
 };
+
+&fuse {
+	nvmem-layout {
+		compatible = "fixed-layout";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ufs_tune: calib@144 {
+			reg = <0x144 0x08>;
+		};
+	};
+};
+
+&ufs {
+	nvmem-cells = <&ufs_tune>;
+	nvmem-cell-names = "calibration";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 1760720b7128..6dbf05a55935 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -2277,13 +2277,20 @@
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779g0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2361,13 +2368,20 @@
 		isp1: isp@fed20000 {
 			compatible = "renesas,r8a779g0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 613>;
+			reg = <0 0xfed20000 0 0x10000>, <0 0xfee00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
-			resets = <&cpg 613>;
+			resets = <&cpg 613>, <&cpg 17>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
new file mode 100644
index 000000000000..50d53c8d76c5
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the PWM controlled blower fan in connector J3:FAN
+ * on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ *
+ * Example usage:
+ *
+ * # Localize hwmon sysfs directory that matches the PWM fan,
+ * # enable the PWM fan, and configure the fan speed manually.
+ * r8a779g3-sparrow-hawk$ grep -H . /sys/class/hwmon/hwmon?/name
+ * /sys/class/hwmon/hwmon0/name:sensor1_thermal
+ * /sys/class/hwmon/hwmon1/name:sensor2_thermal
+ * /sys/class/hwmon/hwmon2/name:sensor3_thermal
+ * /sys/class/hwmon/hwmon3/name:sensor4_thermal
+ * /sys/class/hwmon/hwmon4/name:pwmfan
+ *                       ^      ^^^^^^
+ *
+ * # Select mode 2 , enable fan PWM and regulator and keep them enabled.
+ * # For details, see Linux Documentation/hwmon/pwm-fan.rst
+ * r8a779g3-sparrow-hawk$ echo 2 > /sys/class/hwmon/hwmon4/pwm1_enable
+ *
+ * # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed .
+ * # Fan speed 101 is about 2/5 of the PWM fan speed:
+ * r8a779g3-sparrow-hawk$ echo 101 > /sys/class/hwmon/hwmon4/pwm1
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Override default PWM fan settings. For a list of available properties,
+ * see schema Documentation/devicetree/bindings/hwmon/pwm-fan.yaml .
+ */
+&fan {
+	/* Available cooling levels */
+	cooling-levels = <0 50 100 150 200 255>;
+	/* Four pulses of tacho signal per one revolution */
+	pulses-per-revolution = <4>;
+	/* PWM period: 100us ~= 10 kHz */
+	pwms = <&pwm0 0 100000>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
new file mode 100644
index 000000000000..6955eafd8d6a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ */
+/*
+ * DA7212 Codec settings
+ *
+ * for Playback
+ *	> amixer set "Headphone" 40%
+ *	> amixer set "Headphone" on
+ *	> amixer set "Mixout Left DAC Left"  on
+ *	> amixer set "Mixout Right DAC Right" on
+ *	> aplay xxx.wav
+ *
+ * for Capture (Aux/Mic)
+ *
+ *		on/off (B)
+ *	CONN3 (HeadSet) ---+----> MSIOF1
+ *			   |
+ *	CONN4 AUX ---------+ on/off (A)
+ *
+ *	> amixer set "Mixin PGA" on
+ *	> amixer set "Mixin PGA" 50%
+ *	> amixer set "ADC" on
+ *	> amixer set "ADC" 80%
+ *	> amixer set "Aux" on				^
+ *	> amixer set "Aux" 80%				| (A)
+ *	> amixer set "Mixin Left Aux Left" on		|
+ *	> amixer set "Mixin Right Aux Right" on		v
+ *	> amixer set "Mic 1" on				^
+ *	> amixer set "Mic 1" 80%			| (B)
+ *	> amixer set "Mixin Left Mic 1" on		|
+ *	> amixer set "Mixin Right Mic 1" on		v
+ *	> arecord -f cd xxx.wav
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
+#include "r8a779g3.dtsi"
+
+/ {
+	model = "Retronix Sparrow Hawk board based on r8a779g3";
+	compatible = "retronix,sparrow-hawk", "renesas,r8a779g3",
+		     "renesas,r8a779g0";
+
+	aliases {
+		ethernet0 = &avb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &hscif0;
+		serial1 = &hscif1;
+		serial2 = &hscif3;
+		spi0 = &rpc;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	/* Page 31 / FAN */
+	fan: pwm-fan {
+		pinctrl-0 = <&irq4_pins>;
+		pinctrl-names = "default";
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		interrupts-extended = <&intc_ex 4 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The fan model connected to this device can be selected
+		 * by user. Set "cooling-levels" DT property to single 255
+		 * entry to force the fan PWM into constant HIGH, which
+		 * forces the fan to spin at maximum RPM, thus providing
+		 * maximum cooling to this device and protection against
+		 * misconfigured PWM duty cycle to the fan.
+		 *
+		 * User has to configure "pwms" and "pulses-per-revolution"
+		 * DT properties according to fan datasheet first, and then
+		 * extend "cooling-levels = <0 m n ... 255>" property to
+		 * achieve proper fan control compatible with fan model
+		 * installed by user.
+		 */
+		cooling-levels = <255>;
+		pulses-per-revolution = <2>;
+		pwms = <&pwm0 0 50000>;
+	};
+
+	/*
+	 * Page 15 / LPDDR5
+	 *
+	 * This configuration listed below is for the 8 GiB board variant
+	 * with MT62F1G64D8EK-023 WT:C LPDDR5 part populated on the board.
+	 *
+	 * A variant with 16 GiB MT62F2G64D8EK-023 WT:C part populated on
+	 * the board is automatically handled by the bootloader, which
+	 * adjusts the correct DRAM size into the memory nodes below.
+	 */
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+
+	/* Page 27 / DSI to Display */
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN6";
+		type = "full-size";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* Page 27 / DSI to Display */
+	sn65dsi86_refclk: clk-x9 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
+	/* Page 30 / Audio_Codec */
+	sound_card: sound {
+		compatible = "audio-graph-card2";
+		links = <&msiof1_snd>;
+	};
+
+	/* Page 17 uSD-Slot */
+	vcc_sdhi: regulator-vcc-sdhi {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&audio_clkin {
+	clock-frequency = <24576000>;
+};
+
+/* Page 22 / Ether_AVB0 */
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb0_phy>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		avb0_phy: ethernet-phy@0 {	/* KSZ9031RNXVB */
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <1500>;
+			reg = <0>;
+			/* AVB0_PHY_INT_V */
+			interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
+			/* GP7_10/AVB0_RESETN_V */
+			reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+/* Page 28 / CANFD_IF */
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+/* Page 28 / CANFD_IF */
+&canfd {
+	pinctrl-0 = <&canfd3_pins>, <&canfd4_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel3 {
+		status = "okay";
+	};
+
+	channel4 {
+		status = "okay";
+	};
+};
+
+/* Page 27 / DSI to Display */
+&dsi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi1_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+/* Page 27 / DSI to Display */
+&du {
+	status = "okay";
+};
+
+/* Page 5 / R-Car V4H_INT_I2C */
+&extal_clk {	/* X3 */
+	clock-frequency = <16666666>;
+};
+
+/* Page 5 / R-Car V4H_INT_I2C */
+&extalr_clk {	/* X2 */
+	clock-frequency = <32768>;
+};
+
+/* Page 26 / 2230 Key M M.2 */
+&gpio4 {
+	/* 9FGV0441 nOE inputs 0 and 1 */
+	pcie-m2-oe-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "PCIe-CLK-nOE-M2";
+	};
+
+	/* 9FGV0441 nOE inputs 2 and 3 */
+	pcie-usb-oe-hog {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "PCIe-CLK-nOE-USB";
+	};
+};
+
+/* Page 23 / DEBUG */
+&hscif0 {	/* FTDI ADBUS[3:0] */
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	bootph-all;
+
+	status = "okay";
+};
+
+/* Page 23 / DEBUG */
+&hscif1 {	/* FTDI BDBUS[3:0] */
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+/* Page 24 / UART */
+&hscif3 {	/* CN7 pins 8 (TX) and 10 (RX) */
+	pinctrl-0 = <&hscif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+/* Page 24 / I2C SWITCH */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	mux@71 {
+		compatible = "nxp,pca9544";	/* TCA9544 */
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_3p3v>;
+
+		i2c0_mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Page 27 / DSI to Display */
+			bridge@2c {
+				pinctrl-0 = <&irq0_pins>;
+				pinctrl-names = "default";
+
+				compatible = "ti,sn65dsi86";
+				reg = <0x2c>;
+
+				clocks = <&sn65dsi86_refclk>;
+				clock-names = "refclk";
+
+				interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+				enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+				vccio-supply = <&reg_1p8v>;
+				vpll-supply = <&reg_1p8v>;
+				vcca-supply = <&reg_1p2v>;
+				vcc-supply = <&reg_1p2v>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						sn65dsi86_in: endpoint {
+							remote-endpoint = <&dsi1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						sn65dsi86_out: endpoint {
+							remote-endpoint = <&mini_dp_con_in>;
+						};
+					};
+				};
+			};
+		};
+
+		i2c0_mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Page 30 / Audio_Codec */
+			codec@1a {
+				compatible = "dlg,da7212";
+
+				#sound-dai-cells = <0>;
+				reg = <0x1a>;
+
+				clocks = <&rcar_sound>;
+				clock-names = "mclk";
+
+				VDDA-supply   = <&reg_1p8v>;
+				VDDMIC-supply = <&reg_3p3v>;
+				VDDIO-supply  = <&reg_3p3v>;
+
+				port {
+					da7212_endpoint: endpoint {
+						bitclock-master;
+						frame-master;
+						remote-endpoint = <&msiof1_snd_endpoint>;
+					};
+				};
+			};
+		};
+
+		i2c0_mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN / CAM_CN0 */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 29 / CSI_IF_CN / CAM_CN1 */
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 31 / IO_CN */
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 31 / IO_CN */
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 18 / POWER_CORE and Page 19 / POWER_PMIC */
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 17 uSD-Slot */
+&mmc0 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-1 = <&sd_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	bus-width = <4>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;	/* SD_CD */
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vcc_sdhi>;
+	status = "okay";
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* ignore DT warning */
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+
+	msiof1_snd: port {
+		msiof1_snd_endpoint: endpoint {
+			remote-endpoint = <&da7212_endpoint>;
+		};
+	};
+};
+
+/* Page 26 / 2230 Key M M.2 */
+&pcie0_clkref {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Page 25 / PCIe to USB */
+&pcie1_clkref {
+	clock-frequency = <100000000>;
+};
+
+&pciec1 {
+	/* uPD720201 is PCIe Gen2 x1 device */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Page 22 / Ether_AVB0 */
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins-mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins-mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+
+	/* Page 28 / CANFD_IF */
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	/* Page 28 / CANFD_IF */
+	canfd3_pins: canfd3 {
+		groups = "canfd3_data";
+		function = "canfd3";
+	};
+
+	/* Page 28 / CANFD_IF */
+	canfd4_pins: canfd4 {
+		groups = "canfd4_data";
+		function = "canfd4";
+	};
+
+	/* Page 23 / DEBUG */
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	/* Page 23 / DEBUG */
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	/* Page 24 / UART */
+	hscif3_pins: hscif3 {
+		groups = "hscif3_data_a";
+		function = "hscif3";
+	};
+
+	/* Page 24 / I2C SWITCH */
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	/* Page 29 / CSI_IF_CN / CAM_CN0 */
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	/* Page 29 / CSI_IF_CN / CAM_CN1 */
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	/* Page 31 / IO_CN */
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	/* Page 31 / IO_CN */
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	/* Page 18 / POWER_CORE */
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	/* Page 27 / DSI to Display */
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0_a";
+		function = "intc_ex";
+	};
+
+	/* Page 31 / FAN */
+	irq4_pins: irq4 {
+		groups = "intc_ex_irq4_b";
+		function = "intc_ex";
+	};
+
+	/* Page 31 / FAN */
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	/* Page 31 / CN7 pin 12 */
+	pwm1_pins: pwm1 {
+		groups = "pwm1_b";
+		function = "pwm1";
+	};
+
+	/* Page 31 / CN7 pin 32 */
+	pwm6_pins: pwm6 {
+		groups = "pwm6";
+		function = "pwm6";
+	};
+
+	/* Page 31 / CN7 pin 33 */
+	pwm7_pins: pwm7 {
+		groups = "pwm7";
+		function = "pwm7";
+	};
+
+	/* Page 16 / QSPI_FLASH */
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+		bootph-all;
+	};
+
+	/* Page 6 / SCIF_CLK_SOC_V */
+	scif_clk_pins: scif-clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	/* Page 17 uSD-Slot */
+	sd_pins: sd {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	/* Page 17 uSD-Slot */
+	sd_uhs_pins: sd-uhs {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	/* Page 30 / Audio_Codec */
+	msiof1_pins: sound {
+		groups = "msiof1_clk", "msiof1_sync", "msiof1_txd", "msiof1_rxd";
+		function = "msiof1";
+	};
+
+	/* Page 30 / Audio_Codec */
+	sound_clk_pins: sound-clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+};
+
+/* Page 30 / Audio_Codec */
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* It is used for ADG output as DA7212_MCLK */
+
+	/* audio_clkout */
+	clock-frequency = <12288000>; /* 48 kHz groups */
+
+	status = "okay";
+};
+
+/* Page 31 / FAN */
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 12 */
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 32 */
+&pwm6 {
+	pinctrl-0 = <&pwm6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 33 */
+&pwm7 {
+	pinctrl-0 = <&pwm7_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 16 / QSPI_FLASH */
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	bootph-all;
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+
+			user@1000000 {
+				reg = <0x1000000 0x2f80000>;
+			};
+
+			env1@3f80000 {
+				reg = <0x3f80000 0x40000>;
+			};
+
+			env2@3fc0000 {
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+/* Page 6 / SCIF_CLK_SOC_V */
+&scif_clk {	/* X12 */
+	clock-frequency = <24000000>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779h0.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
index 8524a1e7205e..ed1eefa3515d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
@@ -1968,13 +1968,20 @@
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779h0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2053,10 +2060,14 @@
 			compatible = "renesas,r8a779h0-isp",
 				     "renesas,rcar-gen4-isp";
 			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			reg-names = "cs";
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs";
 			clocks = <&cpg CPG_MOD 613>;
+			clock-names = "cs";
 			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
 			resets = <&cpg 613>;
+			reset-names = "cs";
 			status = "disabled";
 
 			ports {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 6b1c77cd8261..ecaa9c4f305c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -244,6 +244,121 @@
 			status = "disabled";
 		};
 
+		gpt: pwm@10048000 {
+			compatible = "renesas,r9a07g044-gpt",
+				     "renesas,rzg2l-gpt";
+			reg = <0 0x10048000 0 0x800>;
+			#pwm-cells = <3>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 221 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 222 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 227 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 259 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 273 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 274 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 275 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0",
+					  "cmpe0", "cmpf0", "adtrga0", "adtrgb0",
+					  "ovf0", "unf0",
+					  "ccmpa1", "ccmpb1", "cmpc1", "cmpd1",
+					  "cmpe1", "cmpf1", "adtrga1", "adtrgb1",
+					  "ovf1", "unf1",
+					  "ccmpa2", "ccmpb2", "cmpc2", "cmpd2",
+					  "cmpe2", "cmpf2", "adtrga2", "adtrgb2",
+					  "ovf2", "unf2",
+					  "ccmpa3", "ccmpb3", "cmpc3", "cmpd3",
+					  "cmpe3", "cmpf3", "adtrga3", "adtrgb3",
+					  "ovf3", "unf3",
+					  "ccmpa4", "ccmpb4", "cmpc4", "cmpd4",
+					  "cmpe4", "cmpf4", "adtrga4", "adtrgb4",
+					  "ovf4", "unf4",
+					  "ccmpa5", "ccmpb5", "cmpc5", "cmpd5",
+					  "cmpe5", "cmpf5", "adtrga5", "adtrgb5",
+					  "ovf5", "unf5",
+					  "ccmpa6", "ccmpb6", "cmpc6", "cmpd6",
+					  "cmpe6", "cmpf6", "adtrga6", "adtrgb6",
+					  "ovf6", "unf6",
+					  "ccmpa7", "ccmpb7", "cmpc7", "cmpd7",
+					  "cmpe7", "cmpf7", "adtrga7", "adtrgb7",
+					  "ovf7", "unf7";
+			clocks = <&cpg CPG_MOD R9A07G044_GPT_PCLK>;
+			resets = <&cpg R9A07G044_GPT_RST_C>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		ssi0: ssi@10049c00 {
 			compatible = "renesas,r9a07g044-ssi",
 				     "renesas,rz-ssi";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
index 568d49cfe44a..b36749f94ccb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -27,6 +27,13 @@
 #error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
 #endif
 
+/*
+ * To enable the GPT pins GTIOC4A(PMOD0_PIN7) and GTIOC4B(PMOD0_PIN10) on the
+ * PMOD0 connector (J1), enable PMOD0_GPT by setting "#define PMOD0_GPT	1"
+ * below.
+ */
+#define PMOD0_GPT	0
+
 #include "r9a07g044l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 01f59914dd09..669eca74da0a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -244,6 +244,121 @@
 			status = "disabled";
 		};
 
+		gpt: pwm@10048000 {
+			compatible = "renesas,r9a07g054-gpt",
+				     "renesas,rzg2l-gpt";
+			reg = <0 0x10048000 0 0x800>;
+			#pwm-cells = <3>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 221 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 222 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 227 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 259 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 273 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 274 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 275 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0",
+					  "cmpe0", "cmpf0", "adtrga0", "adtrgb0",
+					  "ovf0", "unf0",
+					  "ccmpa1", "ccmpb1", "cmpc1", "cmpd1",
+					  "cmpe1", "cmpf1", "adtrga1", "adtrgb1",
+					  "ovf1", "unf1",
+					  "ccmpa2", "ccmpb2", "cmpc2", "cmpd2",
+					  "cmpe2", "cmpf2", "adtrga2", "adtrgb2",
+					  "ovf2", "unf2",
+					  "ccmpa3", "ccmpb3", "cmpc3", "cmpd3",
+					  "cmpe3", "cmpf3", "adtrga3", "adtrgb3",
+					  "ovf3", "unf3",
+					  "ccmpa4", "ccmpb4", "cmpc4", "cmpd4",
+					  "cmpe4", "cmpf4", "adtrga4", "adtrgb4",
+					  "ovf4", "unf4",
+					  "ccmpa5", "ccmpb5", "cmpc5", "cmpd5",
+					  "cmpe5", "cmpf5", "adtrga5", "adtrgb5",
+					  "ovf5", "unf5",
+					  "ccmpa6", "ccmpb6", "cmpc6", "cmpd6",
+					  "cmpe6", "cmpf6", "adtrga6", "adtrgb6",
+					  "ovf6", "unf6",
+					  "ccmpa7", "ccmpb7", "cmpc7", "cmpd7",
+					  "cmpe7", "cmpf7", "adtrga7", "adtrgb7",
+					  "ovf7", "unf7";
+			clocks = <&cpg CPG_MOD R9A07G054_GPT_PCLK>;
+			resets = <&cpg R9A07G054_GPT_RST_C>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		ssi0: ssi@10049c00 {
 			compatible = "renesas,r9a07g054-ssi",
 				     "renesas,rz-ssi";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index b3e6016880dd..43c456ffa63c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -26,6 +26,13 @@
 #error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
 #endif
 
+/*
+ * To enable the GPT pins GTIOC4A(PMOD0_PIN7) and GTIOC4B(PMOD0_PIN10) on the
+ * PMOD0 connector (J1), enable PMOD0_GPT by setting "#define PMOD0_GPT	1"
+ * below.
+ */
+#define PMOD0_GPT	0
+
 #include "r9a07g054l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g047.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
index c93aa16d0a6e..876f70fed433 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
@@ -105,6 +105,35 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-630000000 {
+			opp-hz = /bits/ 64 <630000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-315000000 {
+			opp-hz = /bits/ 64 <315000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-157500000 {
+			opp-hz = /bits/ 64 <157500000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-78750000 {
+			opp-hz = /bits/ 64 <78750000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-19687500 {
+			opp-hz = /bits/ 64 <19687500>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -131,6 +160,95 @@
 		#size-cells = <2>;
 		ranges;
 
+		icu: interrupt-controller@10400000 {
+			compatible = "renesas,r9a09g047-icu";
+			reg = <0 0x10400000 0 0x10000>;
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "port_irq0", "port_irq1", "port_irq2",
+					  "port_irq3", "port_irq4", "port_irq5",
+					  "port_irq6", "port_irq7", "port_irq8",
+					  "port_irq9", "port_irq10", "port_irq11",
+					  "port_irq12", "port_irq13", "port_irq14",
+					  "port_irq15",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "int-ca55-0", "int-ca55-1",
+					  "int-ca55-2", "int-ca55-3",
+					  "icu-error-ca55",
+					  "gpt-u0-gtciada", "gpt-u0-gtciadb",
+					  "gpt-u1-gtciada", "gpt-u1-gtciadb";
+			clocks = <&cpg CPG_MOD 0x5>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x36>;
+		};
+
 		pinctrl: pinctrl@10410000 {
 			compatible = "renesas,r9a09g047-pinctrl";
 			reg = <0 0x10410000 0 0x10000>;
@@ -140,6 +258,7 @@
 			gpio-ranges = <&pinctrl 0 0 232>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			interrupt-parent = <&icu>;
 			power-domains = <&cpg>;
 			resets = <&cpg 0xa5>, <&cpg 0xa6>;
 		};
@@ -182,6 +301,66 @@
 			status = "disabled";
 		};
 
+		canfd: can@12440000 {
+			compatible = "renesas,r9a09g047-canfd";
+			reg = <0 0x12440000 0 0x40000>;
+			interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx",
+					  "ch2_err", "ch2_rec", "ch2_trx",
+					  "ch3_err", "ch3_rec", "ch3_trx",
+					  "ch4_err", "ch4_rec", "ch4_trx",
+					  "ch5_err", "ch5_rec", "ch5_trx";
+			clocks = <&cpg CPG_MOD 0x9c>, <&cpg CPG_MOD 0x9d>,
+				 <&cpg CPG_MOD 0x9e>;
+			clock-names = "fck", "ram_clk", "can_clk";
+			assigned-clocks = <&cpg CPG_MOD 0x9e>;
+			assigned-clock-rates = <80000000>;
+			resets = <&cpg 0xa1>, <&cpg 0xa2>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+			channel2 {
+				status = "disabled";
+			};
+			channel3 {
+				status = "disabled";
+			};
+			channel4 {
+				status = "disabled";
+			};
+			channel5 {
+				status = "disabled";
+			};
+		};
+
 		wdt1: watchdog@14400000 {
 			compatible = "renesas,r9a09g047-wdt", "renesas,r9a09g057-wdt";
 			reg = <0 0x14400000 0 0x400>;
@@ -401,6 +580,26 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@14850000 {
+			compatible = "renesas,r9a09g047-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x14850000 0x0 0x10000>;
+			interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD 0xf0>,
+				 <&cpg CPG_MOD 0xf1>,
+				 <&cpg CPG_MOD 0xf2>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdd>, <&cpg 0xde>, <&cpg 0xdf>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@14900000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x14900000 0 0x20000>,
@@ -410,6 +609,66 @@
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
+
+		sdhi0: mmc@15c00000  {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c00000 0 0x10000>;
+			interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
+				 <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa7>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@15c10000 {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c10000 0 0x10000>;
+			interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
+				 <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa8>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi2: mmc@15c20000 {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c20000 0 0x10000>;
+			interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
+				 <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa9>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
 	};
 
 	timer {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index c063d47e2952..1f5e61a73c35 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -7,6 +7,15 @@
 
 /dts-v1/;
 
+/* Switch selection settings */
+#define SW_GPIO8_CAN0_STB	0
+#define SW_GPIO9_CAN1_STB	0
+#define SW_LCD_EN		0
+#define SW_PDM_EN		0
+#define SW_SD0_DEV_SEL		0
+#define SW_SDIO_M2E		0
+
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
 #include "r9a09g047e57.dtsi"
 #include "rzg3e-smarc-som.dtsi"
@@ -16,16 +25,109 @@
 	model = "Renesas SMARC EVK version 2 based on r9a09g047e57";
 	compatible = "renesas,smarc2-evk", "renesas,rzg3e-smarcm",
 		     "renesas,r9a09g047e57", "renesas,r9a09g047";
+
+	vqmmc_sd1_pvdd: regulator-vqmmc-sd1-pvdd {
+		compatible = "regulator-gpio";
+		regulator-name = "SD1_PVDD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG3E_GPIO(1, 5) GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd_pins>;
+	pinctrl-names = "default";
+
+#if (!SW_PDM_EN)
+	channel1 {
+		status = "okay";
+#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB)
+		phys = <&can_transceiver1>;
+#endif
+	};
+#endif
+
+#if (!SW_LCD_EN)
+	channel4 {
+		status = "okay";
+#if (SW_GPIO8_CAN0_STB)
+		phys = <&can_transceiver0>;
+#endif
+	};
+#endif
+};
+
+#if (!SW_LCD_EN) && (SW_GPIO8_CAN0_STB)
+&can_transceiver0 {
+	standby-gpios = <&pinctrl RZG3E_GPIO(5, 4) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+#endif
+
+#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB)
+&can_transceiver1 {
+	standby-gpios = <&pinctrl RZG3E_GPIO(5, 5) GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };
+#endif
 
 &pinctrl {
+	canfd_pins: canfd {
+		can1_pins: can1 {
+			pinmux = <RZG3E_PORT_PINMUX(L, 2, 3)>, /* RX */
+				 <RZG3E_PORT_PINMUX(L, 3, 3)>; /* TX */
+		};
+
+		can4_pins: can4 {
+			pinmux = <RZG3E_PORT_PINMUX(5, 2, 3)>, /* RX */
+				 <RZG3E_PORT_PINMUX(5, 3, 3)>; /* TX */
+		};
+	};
+
 	scif_pins: scif {
 		pins = "SCIF_TXD", "SCIF_RXD";
 		renesas,output-impedance = <1>;
 	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG3E_GPIO(1, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1-cd {
+			pinmux = <RZG3E_PORT_PINMUX(1, 4, 8)>; /* SD1CD */
+		};
+
+		sd1-ctrl {
+			pinmux = <RZG3E_PORT_PINMUX(G, 0, 1)>, /* SD1CLK */
+				 <RZG3E_PORT_PINMUX(G, 1, 1)>; /* SD1CMD */
+		};
+
+		sd1-data {
+			pinmux = <RZG3E_PORT_PINMUX(G, 2, 1)>, /* SD1DAT0 */
+				 <RZG3E_PORT_PINMUX(G, 3, 1)>, /* SD1DAT1 */
+				 <RZG3E_PORT_PINMUX(G, 4, 1)>, /* SD1DAT2 */
+				 <RZG3E_PORT_PINMUX(G, 5, 1)>; /* SD1DAT3 */
+		};
+	};
 };
 
 &scif0 {
 	pinctrl-0 = <&scif_pins>;
 	pinctrl-names = "default";
 };
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sd1_pvdd>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g056.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
new file mode 100644
index 000000000000..90964bd864cc
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2N SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g056-cpg.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* RZV2N_Px = Offset address of PFC_P_mn  - 0x20 */
+#define RZV2N_P0	0
+#define RZV2N_P1	1
+#define RZV2N_P2	2
+#define RZV2N_P3	3
+#define RZV2N_P4	4
+#define RZV2N_P5	5
+#define RZV2N_P6	6
+#define RZV2N_P7	7
+#define RZV2N_P8	8
+#define RZV2N_P9	9
+#define RZV2N_PA	10
+#define RZV2N_PB	11
+
+#define RZV2N_PORT_PINMUX(b, p, f)	RZG2L_PORT_PINMUX(RZV2N_P##b, p, f)
+#define RZV2N_GPIO(port, pin)		RZG2L_GPIO(RZV2N_P##port, pin)
+
+/ {
+	compatible = "renesas,r9a09g056";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_extal_clk: audio-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/*
+	 * The default cluster table is based on the assumption that the PLLCA55 clock
+	 * frequency is set to 1.7GHz. The PLLCA55 clock frequency can be set to
+	 * 1.7/1.6/1.5/1.1 GHz based on the BOOTPLLCA_0/1 pins (and additionally can be
+	 * clocked to 1.8GHz as well). The table below should be overridden in the board
+	 * DTS based on the PLLCA55 clock frequency.
+	 */
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-212500000 {
+			opp-hz = /bits/ 64 <212500000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK1>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK3>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	qextal_clk: qextal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	rtxin_clk: rtxin-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pinctrl: pinctrl@10410000 {
+			compatible = "renesas,r9a09g056-pinctrl";
+			reg = <0 0x10410000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G056_IOTOP_0_SHCLK>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 96>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0xa5>, <&cpg 0xa6>;
+		};
+
+		cpg: clock-controller@10420000 {
+			compatible = "renesas,r9a09g056-cpg";
+			reg = <0 0x10420000 0 0x10000>;
+			clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+			clock-names = "audio_extal", "rtxin", "qextal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sys: system-controller@10430000 {
+			compatible = "renesas,r9a09g056-sys";
+			reg = <0 0x10430000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G056_SYS_0_PCLK>;
+			resets = <&cpg 0x30>;
+		};
+
+		scif: serial@11c01400 {
+			compatible = "renesas,scif-r9a09g056",
+				     "renesas,scif-r9a09g057";
+			reg = <0 0x11c01400 0 0x400>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eri", "rxi", "txi", "bri", "dri",
+					  "tei", "tei-dri", "rxi-edge", "txi-edge";
+			clocks = <&cpg CPG_MOD 0x8f>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg 0x95>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@14900000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x14900000 0 0x20000>,
+			      <0x0 0x14940000 0 0x80000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@15c00000  {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c00000 0 0x10000>;
+			interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
+				 <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa7>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@15c10000 {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c10000 0 0x10000>;
+			interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
+				 <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa8>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi2: mmc@15c20000 {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c20000 0 0x10000>;
+			interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
+				 <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa9>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
new file mode 100644
index 000000000000..24343fce7f53
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2N EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g056.dtsi"
+
+/ {
+	model = "Renesas RZ/V2N EVK Board based on r9a09g056n48";
+	compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056";
+
+	aliases {
+		mmc1 = &sdhi1;
+		serial0 = &scif;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x1 0xf8000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vqmmc_sdhi1: regulator-vqmmc-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VqmmC";
+		gpios = <&pinctrl RZV2N_GPIO(A, 2) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&audio_extal_clk {
+	clock-frequency = <22579200>;
+};
+
+&pinctrl {
+	scif_pins: scif {
+		pins = "SCIF_TXD", "SCIF_RXD";
+		renesas,output-impedance = <1>;
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZV2N_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1-cd {
+			pinmux = <RZV2N_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+		};
+
+		sd1-clk {
+			pins = "SD1CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd1-dat-cmd {
+			pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&rtxin_clk {
+	clock-frequency = <32768>;
+};
+
+&scif {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g057.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 0cd00bb05191..0f3501951409 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -280,6 +280,171 @@
 			resets = <&cpg 0x30>;
 		};
 
+		dmac0: dma-controller@11400000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x11400000 0 0x10000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 90  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 91  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 92  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 93  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 94  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 95  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 96  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 97  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 98  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 99  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x0>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x31>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 4>;
+		};
+
+		dmac1: dma-controller@14830000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x14830000 0 0x10000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 25  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 26  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 27  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 28  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 29  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 30  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x1>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x32>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 0>;
+		};
+
+		dmac2: dma-controller@14840000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x14840000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 48  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x2>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x33>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 1>;
+		};
+
+		dmac3: dma-controller@12000000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x12000000 0 0x10000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 64  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 65  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 66  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 69  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 70  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 71  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x3>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x34>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 2>;
+		};
+
+		dmac4: dma-controller@12010000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x12010000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 74  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 75  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 76  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 77  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 81  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 82  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 83  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 84  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 85  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 87  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 88  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x4>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x35>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 3>;
+		};
+
 		ostm0: timer@11800000 {
 			compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
 			reg = <0x0 0x11800000 0x0 0x1000>;
@@ -653,6 +818,13 @@
 			resets = <&cpg 0xa7>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
 		};
 
 		sdhi1: mmc@15c10000 {
@@ -666,6 +838,13 @@
 			resets = <&cpg 0xa8>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
 		};
 
 		sdhi2: mmc@15c20000 {
@@ -679,6 +858,13 @@
 			resets = <&cpg 0xa9>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
index e378d55e6e9b..afdc1940e24a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
@@ -5,6 +5,26 @@
  * Copyright (C) 2024 Renesas Electronics Corp.
  */
 
+/*
+ * Please set the switch position SW_OPT_MUX.1 on the carrier board and the
+ * corresponding macro SW_SDIO_M2E on the board DTS:
+ *
+ * SW_SDIO_M2E:
+ *     0 - SMARC SDIO signal is connected to uSD1
+ *     1 - SMARC SDIO signal is connected to M.2 Key E connector
+ *
+ * Please set the switch position SW_GPIO_CAN_PMOD on the carrier board and the
+ * corresponding macro SW_GPIO8_CAN0_STB/SW_GPIO8_CAN0_STB on the board DTS:
+ *
+ * SW_GPIO8_CAN0_STB:
+ *	0 - Connect to GPIO8 PMOD (default)
+ *	1 - Connect to CAN0 transceiver STB pin
+ *
+ * SW_GPIO9_CAN1_STB:
+ *	0 - Connect to GPIO9 PMOD (default)
+ *	1 - Connect to CAN1 transceiver STB pin
+ */
+
 / {
 	model = "Renesas RZ SMARC Carrier-II Board";
 	compatible = "renesas,smarc2-evk";
@@ -16,9 +36,36 @@
 
 	aliases {
 		serial3 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	can_transceiver0: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		status = "disabled";
 	};
+
+	can_transceiver1: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		status = "disabled";
+	};
+};
+
+&canfd {
+	status = "okay";
 };
 
 &scif0 {
 	status = "okay";
 };
+
+&sdhi1 {
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index e9f244c33d55..2616dbde4dd5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -38,6 +38,11 @@
 		line-name = "can1_stb";
 	};
 
+	gpt_pins: gpt {
+		pinmux = <RZG2L_PORT_PINMUX(43, 0, 2)>, /* GTIOC4A */
+			 <RZG2L_PORT_PINMUX(43, 1, 2)>; /* GTIOC4B */
+	};
+
 	i2c0_pins: i2c0 {
 		pins = "RIIC0_SDA", "RIIC0_SCL";
 		input-enable;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 21cf198b3c17..d511e152d7c6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -327,7 +327,7 @@
 	status = "okay";
 
 	flash@0 {
-		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 789f7b0b5ebc..b76b55e7f09d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -104,6 +104,14 @@
 	};
 };
 
+#if PMOD0_GPT
+&gpt {
+	pinctrl-0 = <&gpt_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+#endif /* PMOD0_GPT */
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 9aa729fbdce0..3e8909a872e3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -246,7 +246,7 @@
 	status = "okay";
 
 	flash@0 {
-		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
index f4ba050beb0d..ecea29a76b14 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
@@ -5,20 +5,185 @@
  * Copyright (C) 2024 Renesas Electronics Corp.
  */
 
+/*
+ * Please set the below switch position on the SoM and the corresponding macro
+ * on the board DTS:
+ *
+ * Switch position SYS.1, Macro SW_SD0_DEV_SEL:
+ *      0 - SD0 is connected to eMMC (default)
+ *      1 - SD0 is connected to uSD0 card
+ *
+ * Switch position SYS.5, Macro SW_LCD_EN:
+ *      0 - Select Misc. Signals routing
+ *      1 - Select LCD
+ *
+ * Switch position BOOT.6, Macro SW_PDM_EN:
+ *      0 - Select CAN routing
+ *      1 - Select PDM
+ */
+
 / {
 	compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047";
 
+	aliases {
+		i2c2 = &i2c2;
+		mmc0 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* First 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0xf8000000>;
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd0p8v_others: regulator-vdd0p8v-others {
+		compatible = "regulator-fixed";
+
+		regulator-name = "fixed-0.8V";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x3: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
 };
 
 &audio_extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&gpu {
+	status = "okay";
+	mali-supply = <&reg_vdd0p8v_others>;
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+		clocks = <&x3>;
+		clock-names = "xin";
+
+		pinctrl-0 = <&rtc_irq_pin>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&pinctrl RZG3E_GPIO(S, 1) IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&pinctrl {
+	i2c2_pins: i2c {
+		pinmux = <RZG3E_PORT_PINMUX(3, 4, 1)>, /* SCL2 */
+			 <RZG3E_PORT_PINMUX(3, 5, 1)>; /* SDA2 */
+	};
+
+	rtc_irq_pin: rtc-irq {
+		pins = "PS1";
+		bias-pull-up;
+	};
+
+	sdhi0_emmc_pins: sd0-emmc {
+		sd0-ctrl {
+			pins = "SD0CLK", "SD0CMD";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3",
+			       "SD0DAT4", "SD0DAT5", "SD0DAT6", "SD0DAT7";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-rst {
+			pins = "SD0RSTN";
+			renesas,output-impedance = <3>;
+		};
+	};
+
+	sdhi0_usd_pins: sd0-usd {
+		sd0-cd {
+			pinmux = <RZG3E_PORT_PINMUX(5, 0, 8)>;
+		};
+
+		sd0-ctrl {
+			pins = "SD0CLK", "SD0CMD";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-iovs {
+			pins = "SD0IOVS";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-pwen {
+			pins = "SD0PWEN";
+			renesas,output-impedance = <3>;
+		};
+	};
+
+	sdhi2_pins: sd2 {
+		sd2-cd {
+			pinmux = <RZG3E_PORT_PINMUX(K, 0, 1)>; /* SD2CD */
+		};
+
+		sd2-ctrl {
+			pinmux = <RZG3E_PORT_PINMUX(H, 0, 1)>, /* SD2CLK */
+				 <RZG3E_PORT_PINMUX(H, 1, 1)>; /* SD2CMD */
+		};
+
+		sd2-data {
+			pinmux = <RZG3E_PORT_PINMUX(H, 2, 1)>, /* SD2DAT0 */
+				 <RZG3E_PORT_PINMUX(H, 3, 1)>, /* SD2DAT1 */
+				 <RZG3E_PORT_PINMUX(H, 4, 1)>, /* SD2DAT2 */
+				 <RZG3E_PORT_PINMUX(H, 5, 1)>; /* SD2DAT3 */
+		};
+
+		sd2-iovs {
+			pinmux = <RZG3E_PORT_PINMUX(K, 1, 1)>; /* SD2IOVS */
+		};
+
+		sd2-pwen {
+			pinmux = <RZG3E_PORT_PINMUX(K, 2, 1)>; /* SD2PWEN */
+		};
+	};
+};
+
 &qextal_clk {
 	clock-frequency = <24000000>;
 };
@@ -27,6 +192,56 @@
 	clock-frequency = <32768>;
 };
 
+#if (SW_SD0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_usd_pins>;
+	pinctrl-1 = <&sdhi0_usd_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&sdhi0_vqmmc>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi0_vqmmc {
+	status = "okay";
+};
+#else
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&sdhi2_vqmmc>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2_vqmmc {
+	status = "okay";
+};
+
 &wdt1 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso
index c27b9b3d4e5f..f2d53e958da1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso
@@ -108,7 +108,7 @@
 	};
 
 	tpu0_pins: tpu0 {
-		groups = "tpu_to0_a";
+		groups = "tpu_to0_b";
 		function = "tpu";
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
index 20e8232f2f32..976a3ab44e5a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
@@ -11,6 +11,10 @@
 / {
 	model = "Renesas White Hawk Single board";
 	compatible = "renesas,white-hawk-single";
+
+	aliases {
+		ethernet3 = &tsn0;
+	};
 };
 
 &hscif0 {
@@ -53,7 +57,7 @@
 	pinctrl-0 = <&tsn0_pins>;
 	pinctrl-names = "default";
 	phy-mode = "rgmii";
-	phy-handle = <&phy3>;
+	phy-handle = <&tsn0_phy>;
 	status = "okay";
 
 	mdio {
@@ -63,7 +67,7 @@
 		reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		reset-post-delay-us = <4000>;
 
-		phy3: ethernet-phy@0 {
+		tsn0_phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id002b.0980",
 				     "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/Makefile
index 3e8771ef69ba..4bf84622db47 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,9 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w-a2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3148w.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk500hd1829.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3146w-a2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3148w.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-video-demo.dtbo
@@ -40,6 +46,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
@@ -81,6 +88,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
@@ -147,6 +155,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb2-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb
@@ -164,7 +173,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
@@ -233,3 +244,7 @@ rk3588-rock-5b-pcie-ep-dtbs := rk3588-rock-5b.dtb \
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtb
 rk3588-rock-5b-pcie-srns-dtbs := rk3588-rock-5b.dtb \
 	rk3588-rock-5b-pcie-srns.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-haikou-video-demo.dtb
+rk3588-tiger-haikou-haikou-video-demo-dtbs := rk3588-tiger-haikou.dtb \
+	rk3588-tiger-haikou-video-demo.dtbo
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
new file mode 100644
index 000000000000..1d26164be7b8
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with LTK050H3146W-A2 Display";
+	compatible = "tsd,px30-cobra-ltk050h3146w-a2", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w-a2";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
new file mode 100644
index 000000000000..82c6acdb4fae
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with LTK050H3146W Display";
+	compatible = "tsd,px30-cobra-ltk050h3146w", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
new file mode 100644
index 000000000000..94449132df38
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with ltk050h3148w Display";
+	compatible = "tsd,px30-cobra-ltk050h3148w", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
new file mode 100644
index 000000000000..d7b639e7ccab
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra prototype with LTK500HD1829 Display";
+	compatible = "tsd,px30-cobra-ltk500hd1829", "tsd,px30-cobra", "rockchip,px30";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk500hd1829";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cobra_pin_hog>, <&cobra_proto_hog>;
+
+	hog {
+		cobra_proto_hog: cobra-proto-hog {
+			rockchip,pins =
+				/* STUSB4500 open drain outout POWER_OK2, needs pull-up */
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* STUSB4500 open drain outout POWER_OK3, needs pull-up */
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	broken-cd;
+	cap-sd-highspeed;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vccio_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
new file mode 100644
index 000000000000..b7e669d8ba4d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc5v0_sys>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm1 0 1000 0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&heartbeat_led_pin>;
+
+		/*
+		 * LED14 on the PCB. Typically NOT populated.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			label = "heartbeat";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		ring_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			label = "ring_red";
+			pwms = <&pwm5 0 1000000 0>;
+			max-brightness = <255>;
+		};
+
+		ring_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			label = "ring_green";
+			pwms = <&pwm6 0 1000000 0>;
+			max-brightness = <255>;
+		};
+
+		ring_blue: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			label = "ring_blue";
+			pwms = <&pwm7 0 1000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* also named 5V_Q7 in schematics */
+	vcc5v0_sys: regulator-vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	/*
+	 * For hs200 support, U-Boot would have to set the RK809 DCDC4
+	 * rail to 1.8V from the default of 3.0V. It doesn't do that on
+	 * devices out in the field, so disable hs200.
+	 * mmc-hs200-1_8v;
+	 */
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-handle = <&dp83825>;
+	phy-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+/* I2C0 = PMIC, STUSB4500, RTC */
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v8: LDO_REG4 {
+				regulator-name = "vcc_2v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			/*
+			 * vccio_sd also supplies the vmmc supply on prototypes
+			 * with sd-slots, so needs to stay single voltage for
+			 * those. Production models don't have sd-slots anymore
+			 * and only supply vccio2 from this regulator.
+			 */
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			/* vcc_sdio also supplies the pull-up resistors for i2c1 */
+			vcc_sdio: LDO_REG6 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		AVDD28-supply = <&vcc_2v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tch_int &tch_rst>;
+		reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-x;
+		VDDIO-supply = <&vcc_3v3>;
+	};
+};
+
+/*
+ * Enable pull-ups to prevent floating pins when the touch
+ * panel is not connected.
+ */
+&i2c2_xfer {
+	rockchip,pins =
+		<2 RK_PB7 2 &pcfg_pull_up>,
+		<2 RK_PC0 2 &pcfg_pull_up>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&mdio {
+	dp83825: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&phy_rst>;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cobra_pin_hog>;
+
+	hog {
+		cobra_pin_hog: cobra-pin-hog {
+			rockchip,pins =
+				/* USB_HUB2_RESET */
+				<0 RK_PA5 RK_FUNC_GPIO &pcfg_output_high>,
+				/* USB_HUB1_RESET */
+				<0 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>,
+				/* The default pull-down can keep the IC in reset. */
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
+				/* USB-A 5V enable */
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_output_high>,
+				/* USB-A data enable */
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins =
+				<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		phy_rst: phy-rst {
+			rockchip,pins =
+				<2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	panel {
+		dsp_rst: dsp-rst {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		tch_int: tch-int {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		tch_rst: tch-rst {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart1 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "disabled";
+};
+
+&vopl_mmu {
+	status = "disabled";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
new file mode 100644
index 000000000000..b71929bcb33e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-pp1516.dtsi"
+
+/ {
+	model = "Theobroma Systems PP-1516 with LTK050H3146W-A2 Display";
+	compatible = "tsd,px30-pp1516-ltk050h3146w-a2", "tsd,px30-pp1516", "rockchip,px30";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w-a2";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
new file mode 100644
index 000000000000..a9bd5936c701
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-pp1516.dtsi"
+
+/ {
+	model = "Theobroma Systems PP-1516 with LTK050H3148W Display";
+	compatible = "tsd,px30-pp1516-ltk050h3148w", "tsd,px30-pp1516", "rockchip,px30";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
new file mode 100644
index 000000000000..3f9a133d7373
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc5v0_sys>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm1 0 1000 0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&debug_led_pin>, <&heartbeat_led_pin>;
+
+		/*
+		 * LED2 on the PCB, left of the USB-C connector.
+		 * Typically NOT populated.
+		 */
+		debug: led-0 {
+			label = "debug";
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		/*
+		 * LED14 on the PCB, left of the PX30 SoC.
+		 * Typically NOT populated.
+		 */
+		heartbeat: led-1 {
+			label = "heartbeat";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc5v0_sys: regulator-vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_cam_avdd: regulator-vcc-cam-avdd {
+		compatible  = "regulator-fixed";
+		regulator-name = "vcc_cam_avdd";
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_avdd_en>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_2v8>;
+	};
+
+	vcc_cam_dovdd: regulator-vcc-cam-dovdd {
+		compatible  = "regulator-fixed";
+		regulator-name = "vcc_cam_dovdd";
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_dovdd_en>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc_cam_dvdd: regulator-vcc-cam-dvdd {
+		compatible  = "regulator-fixed";
+		regulator-name = "vcc_cam_dvdd";
+		gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_dvdd_en>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_lens_afvdd: regulator-vcc-lens-afvdd {
+		compatible  = "regulator-fixed";
+		regulator-name = "vcc_lens_afvdd";
+		gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_afvdd_en>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_2v8>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	/*
+	 * For hs200 support, U-Boot would have to set the RK809 DCDC4
+	 * rail to 1.8V from the default of 3.0V. It doesn't do that on
+	 * devices out in the field, so disable hs200.
+	 * mmc-hs200-1_8v;
+	 */
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+/* I2C0 = PMIC, Touchscreen */
+&i2c0 {
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		AVDD28-supply = <&vcc_2v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tch_int &tch_rst>;
+		reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc_3v3>;
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v8: LDO_REG4 {
+				regulator-name = "vcc_2v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG6 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* I2C2 = Accelerometer + Camera */
+&i2c2 {
+	/* MEMSIC MXC4005 accelerometer is rated for I2C Fast Mode (<=400KHz) */
+	/* OmniVision OV5675 camera is rated for I2C Fast Mode (<=400KHz) */
+	clock-frequency = <400000>;
+	status = "okay";
+
+	focus: focus@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0xc>;
+		vcc-supply = <&vcc_lens_afvdd>;
+	};
+
+	accel@15 {
+		compatible = "memsic,mxc4005";
+		reg = <0x15>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int>;
+	};
+
+	camera@36 {
+		compatible = "ovti,ov5675";
+		reg = <0x36>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		assigned-clocks = <&cru SCLK_CIF_OUT>;
+		assigned-clock-rates = <19200000>;
+		avdd-supply = <&vcc_cam_avdd>;
+		dvdd-supply = <&vcc_cam_dvdd>;
+		dovdd-supply = <&vcc_cam_dovdd>;
+		lens-focus = <&focus>;
+		orientation = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0 &cam_pwdn>;
+		reset-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+		rotation = <0>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+			};
+		};
+	};
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&isp {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_ucam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
+
+&isp_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	accel {
+		accel_int: accel-int {
+			rockchip,pins =
+				<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	camera {
+		cam_afvdd_en: cam-afvdd-en {
+			rockchip,pins =
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_avdd_en: cam-avdd-en {
+			rockchip,pins =
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_dovdd_en: cam-dovdd-en {
+			rockchip,pins =
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_dvdd_en: cam-dvdd-en {
+			rockchip,pins =
+				<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_pwdn: cam-pwdn {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins =
+				<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		debug_led_pin: debug-led-pin {
+			rockchip,pins =
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	panel {
+		dsp_rst: dsp-rst {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		tch_int: tch-int {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		tch_rst: tch-rst {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index 142244d52706..4203b335a263 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -83,9 +83,7 @@
 
 /* On-module TI DP83825I PHY but no connector, enable in carrierboard */
 &gmac {
-	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 50000 50000>;
+	phy-handle = <&dp83825>;
 	phy-supply = <&vcc_3v3>;
 	clock_in_out = "output";
 };
@@ -344,6 +342,18 @@
 	status = "okay";
 };
 
+&mdio {
+	dp83825: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&phy_rst>;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &pinctrl {
 	emmc {
 		emmc_reset: emmc-reset {
@@ -351,6 +361,12 @@
 		};
 	};
 
+	ethernet {
+		phy_rst: phy-rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		module_led_pin: module-led-pin {
 			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -363,6 +379,18 @@
 				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	spi1 {
+		spi1_csn0_gpio_pin: spi1-csn0-gpio-pin {
+			rockchip,pins =
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+		};
+
+		spi1_csn1_gpio_pin: spi1-csn1-gpio-pin {
+			rockchip,pins =
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -380,6 +408,17 @@
 	vqmmc-supply = <&vccio_sd>;
 };
 
+&spi1 {
+	/*
+	 * Hardware CS has a very slow rise time of about 6us,
+	 * causing transmission errors.
+	 * With cs-gpios we have a rise time of about 20ns.
+	 */
+	cs-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_csn0_gpio_pin &spi1_csn1_gpio_pin &spi1_miso &spi1_mosi>;
+};
+
 &tsadc {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
index 9137dd76e72c..feabdadfa440 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -985,6 +985,12 @@
 		resets = <&cru SRST_GMAC_A>;
 		reset-names = "stmmaceth";
 		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 
 	sdmmc: mmc@ff370000 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index e550b6eeeff3..5367e5fa9232 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -343,6 +343,7 @@
 
 		/* maximum speed for Rockchip SPI */
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&vcc_io>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
new file mode 100644
index 000000000000..70aee1ab904c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+
+/ {
+	model = "Rockchip RK3399 EVB IND LPDDR4 Board";
+	compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	vdd_gpu: regulator@10 {
+		compatible = "tcs,tcs4525";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1500000>;
+		regulator-min-microvolt = <712500>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_b: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1500000>;
+		regulator-min-microvolt = <712500>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <750000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <750000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2200000>;
+				regulator-min-microvolt = <2200000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc0v9_soc: LDO_REG3 {
+				regulator-name = "vcc0v9_soc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG7 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_3v3: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca_1v8>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1 {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2 {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
index 9e4b12ed62cb..be3ae473e562 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -36,6 +36,6 @@
 		compatible = "qcom,ath10k";
 		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
 		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
-		qcom,ath10k-calibration-variant = "GO_DUMO";
+		qcom,calibration-variant = "GO_DUMO";
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index f2234dabd664..70979079923c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -312,14 +312,6 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &vopb {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index e00fbaa8acc1..587e89d7fc5e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -60,16 +60,6 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
 	vcc5v0_sys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -527,10 +517,10 @@
 		};
 	};
 
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
+	usb {
+		cy3304_reset: cy3304-reset {
 			rockchip,pins =
-			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
@@ -595,11 +585,6 @@
 	u2phy1_otg: otg-port {
 		status = "okay";
 	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
 };
 
 &usbdrd3_1 {
@@ -609,12 +594,27 @@
 &usbdrd_dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
-};
+	pinctrl-names = "default";
+	pinctrl-0 = <&cy3304_reset>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
 
-&usb_host1_ehci {
-	status = "okay";
-};
+	};
 
-&usb_host1_ohci {
-	status = "okay";
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 0393da25cdfb..fc9279627ef6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -736,6 +736,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
+		vcc-supply = <&vcc3v3_sys>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 51c6aa26d828..a7e4adf87e7a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -850,6 +850,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_3v0>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index 57a446b5cbd6..9f6ccd9dd1f7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "rk3528.dtsi"
 
 / {
@@ -16,7 +17,11 @@
 	compatible = "radxa,e20c", "rockchip,rk3528";
 
 	aliases {
+		ethernet0 = &gmac1;
+		i2c1 = &i2c1;
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
 	};
 
 	chosen {
@@ -80,6 +85,26 @@
 		};
 	};
 
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc_1v8: regulator-1v8-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_1v8";
@@ -108,9 +133,104 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gpio-keys {
 		user_key: user-key {
 			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -130,6 +250,24 @@
 			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
 };
 
 &saradc {
@@ -148,6 +286,17 @@
 	status = "okay";
 };
 
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0m0_xfer>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3528.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index 26c3559d6a6d..d1c72b52aa4e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -24,14 +24,6 @@
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
 		gpio4 = &gpio4;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
 	};
 
 	cpus {
@@ -103,6 +95,74 @@
 		};
 	};
 
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3528-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff610000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff610000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ffaf0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffaf0000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ffb00000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb00000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ffb10000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb10000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ffb20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb20000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -321,6 +381,16 @@
 			reg = <0x0 0xff280400 0x0 0x20>;
 		};
 
+		vpu_grf: syscon@ff340000 {
+			compatible = "rockchip,rk3528-vpu-grf", "syscon";
+			reg = <0x0 0xff340000 0x0 0x8000>;
+		};
+
+		vo_grf: syscon@ff360000 {
+			compatible = "rockchip,rk3528-vo-grf", "syscon";
+			reg = <0x0 0xff360000 0x0 0x10000>;
+		};
+
 		cru: clock-controller@ff4a0000 {
 			compatible = "rockchip,rk3528-cru";
 			reg = <0x0 0xff4a0000 0x0 0x30000>;
@@ -375,6 +445,7 @@
 			clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 8>, <&dmac 9>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -386,6 +457,7 @@
 			clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 10>, <&dmac 11>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -397,6 +469,7 @@
 			clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 12>, <&dmac 13>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -404,9 +477,11 @@
 
 		uart3: serial@ffa08000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xffa08000 0x0 0x100>;
 			clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			reg = <0x0 0xffa08000 0x0 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 14>, <&dmac 15>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -418,6 +493,7 @@
 			clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 16>, <&dmac 17>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -429,6 +505,7 @@
 			clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 18>, <&dmac 19>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -440,6 +517,7 @@
 			clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 20>, <&dmac 21>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -451,11 +529,194 @@
 			clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 22>, <&dmac 23>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
 		};
 
+		i2c0: i2c@ffa50000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa50000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffa58000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa58000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffa60000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa60000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2m1_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffa68000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa68000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffa70000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa70000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@ffa78000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa78000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@ffa80000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@ffa88000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa88000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@ffa90000 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90000 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@ffa90010 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90010 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@ffa90020 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90020 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@ffa90030 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90030 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@ffa98000 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98000 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@ffa98010 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98010 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@ffa98020 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98020 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@ffa98030 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98030 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		saradc: adc@ffae0000 {
 			compatible = "rockchip,rk3528-saradc";
 			reg = <0x0 0xffae0000 0x0 0x10000>;
@@ -468,6 +729,111 @@
 			status = "disabled";
 		};
 
+		gmac0: ethernet@ffbd0000 {
+			compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+			reg = <0x0 0xffbd0000 0x0 0x10000>;
+			clocks = <&cru CLK_GMAC0_SRC>, <&cru CLK_GMAC0_RMII_50M>,
+				 <&cru CLK_GMAC0_RX>, <&cru CLK_GMAC0_TX>,
+				 <&cru PCLK_MAC_VO>, <&cru ACLK_MAC_VO>;
+			clock-names = "stmmaceth", "clk_mac_ref",
+				      "mac_clk_rx", "mac_clk_tx",
+				      "pclk_mac", "aclk_mac";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-handle = <&rmii0_phy>;
+			phy-mode = "rmii";
+			resets = <&cru SRST_A_MAC_VO>;
+			reset-names = "stmmaceth";
+			rockchip,grf = <&vo_grf>;
+			snps,axi-config = <&gmac0_stmmac_axi_setup>;
+			snps,mixed-burst;
+			snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+			snps,tso;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				rmii0_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x2>;
+					clocks = <&cru CLK_MACPHY>;
+					phy-is-integrated;
+					pinctrl-names = "default";
+					pinctrl-0 = <&fephym0_led_link>,
+						    <&fephym0_led_spd>;
+					resets = <&cru SRST_MACPHY>;
+				};
+			};
+
+			gmac0_stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <8>;
+				snps,wr_osr_lmt = <4>;
+			};
+
+			gmac0_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			gmac0_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <1>;
+				queue0 {};
+			};
+		};
+
+		gmac1: ethernet@ffbe0000 {
+			compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+			reg = <0x0 0xffbe0000 0x0 0x10000>;
+			clocks = <&cru CLK_GMAC1_SRC_VPU>,
+				 <&cru CLK_GMAC1_RMII_VPU>,
+				 <&cru PCLK_MAC_VPU>,
+				 <&cru ACLK_MAC_VPU>;
+			clock-names = "stmmaceth",
+				      "clk_mac_ref",
+				      "pclk_mac",
+				      "aclk_mac";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			resets = <&cru SRST_A_MAC>;
+			reset-names = "stmmaceth";
+			rockchip,grf = <&vpu_grf>;
+			snps,axi-config = <&gmac1_stmmac_axi_setup>;
+			snps,mixed-burst;
+			snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+			snps,tso;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+
+			gmac1_stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <8>;
+				snps,wr_osr_lmt = <4>;
+			};
+
+			gmac1_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			gmac1_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <1>;
+				queue0 {};
+			};
+		};
+
 		sdhci: mmc@ffbf0000 {
 			compatible = "rockchip,rk3528-dwcmshc",
 				     "rockchip,rk3588-dwcmshc";
@@ -492,72 +858,81 @@
 			status = "disabled";
 		};
 
-		pinctrl: pinctrl {
-			compatible = "rockchip,rk3528-pinctrl";
-			rockchip,grf = <&ioc_grf>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			gpio0: gpio@ff610000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xff610000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio1: gpio@ffaf0000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffaf0000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 32 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+		sdio0: mmc@ffc10000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc10000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDIO0>,
+				 <&cru CCLK_SRC_SDIO0>,
+				 <&cru SCLK_SDIO0_DRV>,
+				 <&cru SCLK_SDIO0_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
+			resets = <&cru SRST_H_SDIO0>;
+			reset-names = "reset";
+			status = "disabled";
+		};
 
-			gpio2: gpio@ffb00000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb00000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 64 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+		sdio1: mmc@ffc20000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc20000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDIO1>,
+				 <&cru CCLK_SRC_SDIO1>,
+				 <&cru SCLK_SDIO1_DRV>,
+				 <&cru SCLK_SDIO1_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
+			resets = <&cru SRST_H_SDIO1>;
+			reset-names = "reset";
+			status = "disabled";
+		};
 
-			gpio3: gpio@ffb10000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb10000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 96 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+		sdmmc: mmc@ffc30000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc30000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDMMC0>,
+				 <&cru CCLK_SRC_SDMMC0>,
+				 <&cru SCLK_SDMMC_DRV>,
+				 <&cru SCLK_SDMMC_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
+				    <&sdmmc_det>;
+			resets = <&cru SRST_H_SDMMC0>;
+			reset-names = "reset";
+			rockchip,default-sample-phase = <90>;
+			status = "disabled";
+		};
 
-			gpio4: gpio@ffb20000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb20000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 128 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+		dmac: dma-controller@ffd60000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xffd60000 0x0 0x4000>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 		};
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
new file mode 100644
index 000000000000..6a84db154a7d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024-2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3562.dtsi"
+
+/ {
+	model = "Rockchip RK3562 EVB V20 Board";
+	compatible = "rockchip,rk3562-evb2-v10", "rockchip,rk3562";
+
+	chosen: chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc0 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-vol-up {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <17000>;
+		};
+
+		button-vol-down {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <414000>;
+		};
+
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "menu";
+			press-threshold-microvolt = <800000>;
+		};
+
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "back";
+			press-threshold-microvolt = <1200000>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie20";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+	};
+
+	vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+	};
+
+	vcc3v3_clk: regulator-vcc3v3-clk {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_clk";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "pmic-sleep",
+			"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_cpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG1 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+				regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+				regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&pinctrl {
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc0 {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&sdmmc0 {
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	no-sd;
+	no-mmc;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi
new file mode 100644
index 000000000000..b311448d77a3
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi
@@ -0,0 +1,2352 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	cam {
+		/omit-if-no-ref/
+		camm0_clk0_out: camm0-clk0-out {
+			rockchip,pins =
+				/* camm0_clk0_out */
+				<3 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm0_clk1_out: camm0-clk1-out {
+			rockchip,pins =
+				/* camm0_clk1_out */
+				<3 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm1_clk0_out: camm1-clk0-out {
+			rockchip,pins =
+				/* camm1_clk0_out */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm1_clk1_out: camm1-clk1-out {
+			rockchip,pins =
+				/* camm1_clk1_out */
+				<4 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clk2_out: cam-clk2-out {
+			rockchip,pins =
+				/* cam_clk2_out */
+				<3 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clk3_out: cam-clk3-out {
+			rockchip,pins =
+				/* cam_clk3_out */
+				<3 RK_PB5 2 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rx_m0 */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* can0_tx_m0 */
+				<3 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rx_m1 */
+				<3 RK_PB7 6 &pcfg_pull_none>,
+				/* can0_tx_m1 */
+				<3 RK_PB6 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m2_pins: can0m2-pins {
+			rockchip,pins =
+				/* can0_rx_m2 */
+				<0 RK_PC7 2 &pcfg_pull_none>,
+				/* can0_tx_m2 */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rx_m0 */
+				<1 RK_PB7 4 &pcfg_pull_none>,
+				/* can1_tx_m0 */
+				<1 RK_PC0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rx_m1 */
+				<0 RK_PC1 4 &pcfg_pull_none>,
+				/* can1_tx_m1 */
+				<0 RK_PC0 4 &pcfg_pull_none>;
+		};
+	};
+
+	clk {
+		/omit-if-no-ref/
+		clk_32k_in: clk-32k-in {
+			rockchip,pins =
+				/* clk_32k_in */
+				<0 RK_PB0 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk0 {
+		/omit-if-no-ref/
+		clk0_32k_out: clk0-32k-out {
+			rockchip,pins =
+				/* clk0_32k_out */
+				<0 RK_PB0 2 &pcfg_pull_none>;
+		};
+	};
+
+	clk1 {
+		/omit-if-no-ref/
+		clk1_32k_out: clk1-32k-out {
+			rockchip,pins =
+				/* clk1_32k_out */
+				<2 RK_PA1 3 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_avs */
+				<0 RK_PB7 3 &pcfg_pull_none>;
+		};
+	};
+
+	dsm {
+		/omit-if-no-ref/
+		dsm_pins: dsm-pins {
+			rockchip,pins =
+				/* dsm_aud_ln */
+				<1 RK_PB4 5 &pcfg_pull_none>,
+				/* dsm_aud_lp */
+				<1 RK_PB3 5 &pcfg_pull_none>,
+				/* dsm_aud_rn */
+				<1 RK_PB6 6 &pcfg_pull_none>,
+				/* dsm_aud_rp */
+				<1 RK_PB5 6 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<1 RK_PA0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<1 RK_PA1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<1 RK_PA2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<1 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clk */
+				<1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_strb: emmc-strb {
+			rockchip,pins =
+				/* emmc_strb */
+				<1 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	eth {
+		/omit-if-no-ref/
+		ethm0_pins: ethm0-pins {
+			rockchip,pins =
+				/* eth_clk_25m_out_m0 */
+				<4 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		ethm1_pins: ethm1-pins {
+			rockchip,pins =
+				/* eth_clk_25m_out_m1 */
+				<2 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PB1 2 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PA0 2 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PA1 2 &pcfg_pull_none>,
+				/* fspi_d2 */
+				<1 RK_PA2 2 &pcfg_pull_none>,
+				/* fspi_d3 */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fspi_csn0: fspi-csn0 {
+			rockchip,pins =
+				/* fspi_csn0 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		fspi_csn1: fspi-csn1 {
+			rockchip,pins =
+				/* fspi_csn1 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC0 3 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB1 1 &pcfg_pull_none_smt>,
+				/* i2c0_sda */
+				<0 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1m0_xfer: i2c1m0-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m0 */
+				<0 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m0 */
+				<0 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m1_xfer: i2c1m1-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m1 */
+				<4 RK_PB4 5 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m1 */
+				<4 RK_PB5 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m0 */
+				<0 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m0 */
+				<0 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m1 */
+				<3 RK_PD2 5 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m1 */
+				<3 RK_PD3 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<3 RK_PA0 1 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m0 */
+				<3 RK_PA1 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<4 RK_PA5 5 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m1 */
+				<4 RK_PA6 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m0 */
+				<3 RK_PB6 5 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m0 */
+				<3 RK_PB7 5 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m1 */
+				<0 RK_PA5 2 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m1 */
+				<0 RK_PA4 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m0 */
+				<3 RK_PC2 1 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m0 */
+				<3 RK_PC3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m1 */
+				<1 RK_PC7 4 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m1 */
+				<1 RK_PD0 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s0 {
+		/omit-if-no-ref/
+		i2s0m0_lrck: i2s0m0-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m0 */
+				<3 RK_PA4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_mclk: i2s0m0-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m0 */
+				<3 RK_PA2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sclk: i2s0m0-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m0 */
+				<3 RK_PA3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi0: i2s0m0-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0_m0 */
+				<3 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi1: i2s0m0-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1_m0 */
+				<3 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi2: i2s0m0-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2_m0 */
+				<3 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi3: i2s0m0-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3_m0 */
+				<3 RK_PA6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo0: i2s0m0-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0_m0 */
+				<3 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo1: i2s0m0-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1_m0 */
+				<3 RK_PA6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo2: i2s0m0-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2_m0 */
+				<3 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo3: i2s0m0-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3_m0 */
+				<3 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_lrck: i2s0m1-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m1 */
+				<1 RK_PC4 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_mclk: i2s0m1-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m1 */
+				<1 RK_PC6 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sclk: i2s0m1-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m1 */
+				<1 RK_PC5 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi0: i2s0m1-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0_m1 */
+				<1 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi1: i2s0m1-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1_m1 */
+				<1 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi2: i2s0m1-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2_m1 */
+				<1 RK_PD3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi3: i2s0m1-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3_m1 */
+				<1 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo0: i2s0m1-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0_m1 */
+				<1 RK_PC3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo1: i2s0m1-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1_m1 */
+				<1 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo2: i2s0m1-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2_m1 */
+				<1 RK_PD2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo3: i2s0m1-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3_m1 */
+				<2 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrck: i2s1m0-lrck {
+			rockchip,pins =
+				/* i2s1_lrck_m0 */
+				<3 RK_PC6 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1_mclk_m0 */
+				<3 RK_PC4 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclk: i2s1m0-sclk {
+			rockchip,pins =
+				/* i2s1_sclk_m0 */
+				<3 RK_PC5 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1_sdi0_m0 */
+				<3 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1_sdi1_m0 */
+				<3 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1_sdi2_m0 */
+				<3 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1_sdi3_m0 */
+				<3 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1_sdo0_m0 */
+				<3 RK_PC7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1_sdo1_m0 */
+				<4 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1_sdo2_m0 */
+				<4 RK_PB5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1_sdo3_m0 */
+				<4 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrck: i2s1m1-lrck {
+			rockchip,pins =
+				/* i2s1_lrck_m1 */
+				<3 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1_mclk_m1 */
+				<3 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclk: i2s1m1-sclk {
+			rockchip,pins =
+				/* i2s1_sclk_m1 */
+				<3 RK_PB3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1_sdi0_m1 */
+				<3 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1_sdi1_m1 */
+				<3 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1_sdi2_m1 */
+				<3 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1_sdi3_m1 */
+				<3 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1_sdo0_m1 */
+				<3 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1_sdo1_m1 */
+				<3 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1_sdo2_m1 */
+				<3 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1_sdo3_m1 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrck: i2s2m0-lrck {
+			rockchip,pins =
+				/* i2s2_lrck_m0 */
+				<1 RK_PD6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2_mclk_m0 */
+				<2 RK_PA1 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclk: i2s2m0-sclk {
+			rockchip,pins =
+				/* i2s2_sclk_m0 */
+				<1 RK_PD5 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2_sdi_m0 */
+				<2 RK_PA0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2_sdo_m0 */
+				<1 RK_PD7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrck: i2s2m1-lrck {
+			rockchip,pins =
+				/* i2s2_lrck_m1 */
+				<4 RK_PA1 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2_mclk_m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclk: i2s2m1-sclk {
+			rockchip,pins =
+				/* i2s2_sclk_m1 */
+				<4 RK_PB1 4 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2_sdi_m1 */
+				<3 RK_PD4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2_sdo_m1 */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	isp {
+		/omit-if-no-ref/
+		isp_pins: isp-pins {
+			rockchip,pins =
+				/* isp_flash_trigin */
+				<3 RK_PC1 2 &pcfg_pull_none>,
+				/* isp_flash_trigout */
+				<3 RK_PC3 2 &pcfg_pull_none>,
+				/* isp_prelight_trigout */
+				<3 RK_PC2 2 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtagm0_pins: jtagm0-pins {
+			rockchip,pins =
+				/* jtag_cpu_mcu_tck_m0 */
+				<0 RK_PD1 2 &pcfg_pull_none>,
+				/* jtag_cpu_mcu_tms_m0 */
+				<0 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm1_pins: jtagm1-pins {
+			rockchip,pins =
+				/* jtag_cpu_mcu_tck_m1 */
+				<1 RK_PB5 2 &pcfg_pull_none>,
+				/* jtag_cpu_mcu_tms_m1 */
+				<1 RK_PB6 2 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20 {
+		/omit-if-no-ref/
+		pcie20m0_pins: pcie20m0-pins {
+			rockchip,pins =
+				/* pcie20_clkreqn_m0 */
+				<0 RK_PA6 1 &pcfg_pull_none>,
+				/* pcie20_perstn_m0 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* pcie20_waken_m0 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m1_pins: pcie20m1-pins {
+			rockchip,pins =
+				/* pcie20_clkreqn_m1 */
+				<3 RK_PA6 4 &pcfg_pull_none>,
+				/* pcie20_perstn_m1 */
+				<3 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie20_waken_m1 */
+				<3 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20_buttonrstn: pcie20-buttonrstn {
+			rockchip,pins =
+				/* pcie20_buttonrstn */
+				<0 RK_PB0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pdm {
+		/omit-if-no-ref/
+		pdmm0_clk0: pdmm0-clk0 {
+			rockchip,pins =
+				/* pdm_clk0_m0 */
+				<3 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_clk1: pdmm0-clk1 {
+			rockchip,pins =
+				/* pdm_clk1_m0 */
+				<3 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi0: pdmm0-sdi0 {
+			rockchip,pins =
+				/* pdm_sdi0_m0 */
+				<3 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi1: pdmm0-sdi1 {
+			rockchip,pins =
+				/* pdm_sdi1_m0 */
+				<3 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi2: pdmm0-sdi2 {
+			rockchip,pins =
+				/* pdm_sdi2_m0 */
+				<3 RK_PA7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi3: pdmm0-sdi3 {
+			rockchip,pins =
+				/* pdm_sdi3_m0 */
+				<3 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk0: pdmm1-clk0 {
+			rockchip,pins =
+				/* pdm_clk0_m1 */
+				<4 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk1: pdmm1-clk1 {
+			rockchip,pins =
+				/* pdm_clk1_m1 */
+				<4 RK_PB1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi0: pdmm1-sdi0 {
+			rockchip,pins =
+				/* pdm_sdi0_m1 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi1: pdmm1-sdi1 {
+			rockchip,pins =
+				/* pdm_sdi1_m1 */
+				<4 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi2: pdmm1-sdi2 {
+			rockchip,pins =
+				/* pdm_sdi2_m1 */
+				<4 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi3: pdmm1-sdi3 {
+			rockchip,pins =
+				/* pdm_sdi3_m1 */
+				<4 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA3 0 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		soc_slppin_gpio: soc-slppin-gpio {
+			rockchip,pins =
+				<0 RK_PA2 0 &pcfg_output_low>;
+		};
+
+		/omit-if-no-ref/
+		soc_slppin_slp: soc-slppin-slp {
+			rockchip,pins =
+				<0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug */
+				<0 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PC3 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<1 RK_PC5 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC4 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<1 RK_PC6 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC5 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<1 RK_PC7 3 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_m0 */
+				<0 RK_PA7 1 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m1_pins: pwm3m1-pins {
+			rockchip,pins =
+				/* pwm3_m1 */
+				<1 RK_PD0 3 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_m0 */
+				<0 RK_PB7 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm4m1_pins: pwm4m1-pins {
+			rockchip,pins =
+				/* pwm4_m1 */
+				<1 RK_PD1 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_m0 */
+				<0 RK_PC2 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm5m1_pins: pwm5m1-pins {
+			rockchip,pins =
+				/* pwm5_m1 */
+				<1 RK_PD2 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_m0 */
+				<0 RK_PC1 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_m1 */
+				<1 RK_PD3 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_m0 */
+				<0 RK_PC0 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_m1 */
+				<1 RK_PD4 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PA4 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<1 RK_PC1 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PA5 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<1 RK_PC2 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<1 RK_PB5 5 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<1 RK_PC3 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_m0 */
+				<1 RK_PB6 5 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_m1 */
+				<1 RK_PC4 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<4 RK_PA1 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<3 RK_PB4 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<3 RK_PB5 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC5 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<1 RK_PD7 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_m0 */
+				<3 RK_PC6 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_m1 */
+				<2 RK_PA0 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwr {
+		/omit-if-no-ref/
+		pwr_pins: pwr-pins {
+			rockchip,pins =
+				/* pwr_ctrl0 */
+				<0 RK_PA2 1 &pcfg_pull_none>,
+				/* pwr_ctrl1 */
+				<0 RK_PA3 1 &pcfg_pull_none>;
+		};
+	};
+
+	ref {
+		/omit-if-no-ref/
+		ref_pins: ref-pins {
+			rockchip,pins =
+				/* ref_clk_out */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	rgmii {
+		/omit-if-no-ref/
+		rgmiim0_miim: rgmiim0-miim {
+			rockchip,pins =
+				/* rgmii_mdc_m0 */
+				<4 RK_PB2 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m0 */
+				<4 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rx_er: rgmiim0-rx_er {
+			rockchip,pins =
+				/* rgmii_rxer_m0 */
+				<4 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rx_bus2: rgmiim0-rx_bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0_m0 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m0 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m0 */
+				<4 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_tx_bus2: rgmiim0-tx_bus2 {
+			rockchip,pins =
+				/* rgmii_txd0_m0 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* rgmii_txd1_m0 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* rgmii_txen_m0 */
+				<4 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rgmii_clk: rgmiim0-rgmii_clk {
+			rockchip,pins =
+				/* rgmii_rxclk_m0 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m0 */
+				<3 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rgmii_bus: rgmiim0-rgmii_bus {
+			rockchip,pins =
+				/* rgmii_rxd2_m0 */
+				<3 RK_PD7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m0 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* rgmii_txd2_m0 */
+				<3 RK_PD4 2 &pcfg_pull_none>,
+				/* rgmii_txd3_m0 */
+				<3 RK_PD5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_clk: rgmiim0-clk {
+			rockchip,pins =
+				/* rgmiim0_clk */
+				<4 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_miim: rgmiim1-miim {
+			rockchip,pins =
+				/* rgmii_mdc_m1 */
+				<1 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m1 */
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rx_er: rgmiim1-rx_er {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rx_bus2: rgmiim1-rx_bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0_m1 */
+				<1 RK_PD4 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m1 */
+				<1 RK_PD7 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m1 */
+				<1 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_tx_bus2: rgmiim1-tx_bus2 {
+			rockchip,pins =
+				/* rgmii_txd0_m1 */
+				<1 RK_PD1 2 &pcfg_pull_none>,
+				/* rgmii_txd1_m1 */
+				<1 RK_PD2 2 &pcfg_pull_none>,
+				/* rgmii_txen_m1 */
+				<1 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rgmii_clk: rgmiim1-rgmii_clk {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<1 RK_PC6 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<1 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rgmii_bus: rgmiim1-rgmii_bus {
+			rockchip,pins =
+				/* rgmii_rxd2_m1 */
+				<1 RK_PC4 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<1 RK_PC5 2 &pcfg_pull_none>,
+				/* rgmii_txd2_m1 */
+				<1 RK_PC1 2 &pcfg_pull_none>,
+				/* rgmii_txd3_m1 */
+				<1 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_clk: rgmiim1-clk {
+			rockchip,pins =
+				/* rgmiim1_clk */
+				<1 RK_PD5 2 &pcfg_pull_none>;
+		};
+	};
+
+	rmii {
+		/omit-if-no-ref/
+		rmii_pins: rmii-pins {
+			rockchip,pins =
+				/* rmii_clk */
+				<1 RK_PD5 5 &pcfg_pull_none>,
+				/* rmii_mdc */
+				<1 RK_PC7 5 &pcfg_pull_none>,
+				/* rmii_mdio */
+				<1 RK_PD0 5 &pcfg_pull_none>,
+				/* rmii_rxd0 */
+				<1 RK_PD4 5 &pcfg_pull_none>,
+				/* rmii_rxd1 */
+				<1 RK_PD7 6 &pcfg_pull_none>,
+				/* rmii_rxdv_crs */
+				<1 RK_PD6 5 &pcfg_pull_none>,
+				/* rmii_rxer */
+				<2 RK_PA0 6 &pcfg_pull_none>,
+				/* rmii_txd0 */
+				<1 RK_PD1 5 &pcfg_pull_none>,
+				/* rmii_txd1 */
+				<1 RK_PD2 5 &pcfg_pull_none>,
+				/* rmii_txen */
+				<1 RK_PD3 5 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PB3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<1 RK_PC0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				/* sdmmc0_detn */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_pwren: sdmmc0-pwren {
+			rockchip,pins =
+				/* sdmmc0_pwren */
+				<0 RK_PA5 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<1 RK_PC3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<1 RK_PC6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				/* sdmmc1_detn */
+				<1 RK_PD0 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_pwren: sdmmc1-pwren {
+			rockchip,pins =
+				/* sdmmc1_pwren */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+	};
+
+	spdif {
+		/omit-if-no-ref/
+		spdifm0_pins: spdifm0-pins {
+			rockchip,pins =
+				/* spdif_tx_m0 */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm1_pins: spdifm1-pins {
+			rockchip,pins =
+				/* spdif_tx_m1 */
+				<0 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm2_pins: spdifm2-pins {
+			rockchip,pins =
+				/* spdif_tx_m2 */
+				<1 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clk_m0 */
+				<0 RK_PC3 3 &pcfg_pull_none_drv_level_3>,
+				/* spi0_miso_m0 */
+				<0 RK_PC5 3 &pcfg_pull_none_drv_level_3>,
+				/* spi0_mosi_m0 */
+				<0 RK_PC4 3 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_csn0: spi0m0-csn0 {
+			rockchip,pins =
+				/* spi0m0_csn0 */
+				<0 RK_PC2 3 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi0m0_csn1: spi0m0-csn1 {
+			rockchip,pins =
+				/* spi0m0_csn1 */
+				<0 RK_PB7 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clk_m1 */
+				<3 RK_PB5 4 &pcfg_pull_none_drv_level_3>,
+				/* spi0_miso_m1 */
+				<3 RK_PC0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi0_mosi_m1 */
+				<3 RK_PB4 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_csn0: spi0m1-csn0 {
+			rockchip,pins =
+				/* spi0m1_csn0 */
+				<3 RK_PB7 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi0m1_csn1: spi0m1-csn1 {
+			rockchip,pins =
+				/* spi0m1_csn1 */
+				<3 RK_PB6 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clk_m0 */
+				<3 RK_PD6 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_miso_m0 */
+				<4 RK_PA3 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_mosi_m0 */
+				<4 RK_PA2 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_csn0: spi1m0-csn0 {
+			rockchip,pins =
+				/* spi1m0_csn0 */
+				<3 RK_PD7 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi1m0_csn1: spi1m0-csn1 {
+			rockchip,pins =
+				/* spi1m0_csn1 */
+				<4 RK_PA0 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clk_m1 */
+				<1 RK_PC0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_miso_m1 */
+				<1 RK_PB4 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_mosi_m1 */
+				<1 RK_PB3 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_csn0: spi1m1-csn0 {
+			rockchip,pins =
+				/* spi1m1_csn0 */
+				<1 RK_PB6 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi1m1_csn1: spi1m1-csn1 {
+			rockchip,pins =
+				/* spi1m1_csn1 */
+				<1 RK_PB5 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clk_m0 */
+				<4 RK_PB6 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_miso_m0 */
+				<3 RK_PD2 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_mosi_m0 */
+				<3 RK_PD3 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_csn0: spi2m0-csn0 {
+			rockchip,pins =
+				/* spi2m0_csn0 */
+				<4 RK_PB5 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi2m0_csn1: spi2m0-csn1 {
+			rockchip,pins =
+				/* spi2m0_csn1 */
+				<4 RK_PB4 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clk_m1 */
+				<2 RK_PA1 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_miso_m1 */
+				<2 RK_PA0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_mosi_m1 */
+				<1 RK_PD7 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_csn0: spi2m1-csn0 {
+			rockchip,pins =
+				/* spi2m1_csn0 */
+				<1 RK_PD6 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi2m1_csn1: spi2m1-csn1 {
+			rockchip,pins =
+				/* spi2m1_csn1 */
+				<1 RK_PD5 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm0_pins: tsadcm0-pins {
+			rockchip,pins =
+				/* tsadc_shut_m0 */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadcm1_pins: tsadcm1-pins {
+			rockchip,pins =
+				/* tsadc_shut_m1 */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut_org: tsadc-shut-org {
+			rockchip,pins =
+				/* tsadc_shut_org */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0m0_xfer: uart0m0-xfer {
+			rockchip,pins =
+				/* uart0_rx_m0 */
+				<0 RK_PD0 1 &pcfg_pull_up>,
+				/* uart0_tx_m0 */
+				<0 RK_PD1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m1_xfer: uart0m1-xfer {
+			rockchip,pins =
+				/* uart0_rx_m1 */
+				<1 RK_PB3 2 &pcfg_pull_up>,
+				/* uart0_tx_m1 */
+				<1 RK_PB4 2 &pcfg_pull_up>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<1 RK_PD1 1 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<1 RK_PD2 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<1 RK_PD4 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<1 RK_PD3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rx_m1 */
+				<4 RK_PA6 3 &pcfg_pull_up>,
+				/* uart1_tx_m1 */
+				<4 RK_PA5 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<4 RK_PB0 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<4 RK_PA7 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rx_m0 */
+				<0 RK_PC1 1 &pcfg_pull_up>,
+				/* uart2_tx_m0 */
+				<0 RK_PC0 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m0_ctsn: uart2m0-ctsn {
+			rockchip,pins =
+				/* uart2m0_ctsn */
+				<0 RK_PC2 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m0_rtsn: uart2m0-rtsn {
+			rockchip,pins =
+				/* uart2m0_rtsn */
+				<0 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<3 RK_PA1 2 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<3 RK_PA0 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_ctsn: uart2m1-ctsn {
+			rockchip,pins =
+				/* uart2m1_ctsn */
+				<3 RK_PA2 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m1_rtsn: uart2m1-rtsn {
+			rockchip,pins =
+				/* uart2m1_rtsn */
+				<3 RK_PA3 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<4 RK_PB5 6 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<4 RK_PB4 6 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_ctsn: uart3m0-ctsn {
+			rockchip,pins =
+				/* uart3m0_ctsn */
+				<4 RK_PB6 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart3m0_rtsn: uart3m0-rtsn {
+			rockchip,pins =
+				/* uart3m0_rtsn */
+				<3 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rx_m1 */
+				<3 RK_PC0 3 &pcfg_pull_up>,
+				/* uart3_tx_m1 */
+				<3 RK_PB7 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_ctsn: uart3m1-ctsn {
+			rockchip,pins =
+				/* uart3m1_ctsn */
+				<3 RK_PB6 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart3m1_rtsn: uart3m1-rtsn {
+			rockchip,pins =
+				/* uart3m1_rtsn */
+				<3 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<3 RK_PD1 3 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<3 RK_PD0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_ctsn: uart4m0-ctsn {
+			rockchip,pins =
+				/* uart4m0_ctsn */
+				<3 RK_PC5 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart4m0_rtsn: uart4m0-rtsn {
+			rockchip,pins =
+				/* uart4m0_rtsn */
+				<3 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rx_m1 */
+				<1 RK_PD5 3 &pcfg_pull_up>,
+				/* uart4_tx_m1 */
+				<1 RK_PD6 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_ctsn: uart4m1-ctsn {
+			rockchip,pins =
+				/* uart4m1_ctsn */
+				<2 RK_PA0 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart4m1_rtsn: uart4m1-rtsn {
+			rockchip,pins =
+				/* uart4m1_rtsn */
+				<1 RK_PD7 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<1 RK_PB7 3 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<1 RK_PC0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<1 RK_PB5 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<1 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rx_m1 */
+				<3 RK_PA7 5 &pcfg_pull_up>,
+				/* uart5_tx_m1 */
+				<3 RK_PA6 5 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_ctsn: uart5m1-ctsn {
+			rockchip,pins =
+				/* uart5m1_ctsn */
+				<3 RK_PA0 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m1_rtsn: uart5m1-rtsn {
+			rockchip,pins =
+				/* uart5m1_rtsn */
+				<3 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rx_m0 */
+				<0 RK_PC7 1 &pcfg_pull_up>,
+				/* uart6_tx_m0 */
+				<0 RK_PC6 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<0 RK_PC4 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rx_m1 */
+				<4 RK_PB0 5 &pcfg_pull_up>,
+				/* uart6_tx_m1 */
+				<4 RK_PA7 5 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_ctsn: uart6m1-ctsn {
+			rockchip,pins =
+				/* uart6m1_ctsn */
+				<4 RK_PA2 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart6m1_rtsn: uart6m1-rtsn {
+			rockchip,pins =
+				/* uart6m1_rtsn */
+				<4 RK_PA3 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rx_m0 */
+				<3 RK_PC7 3 &pcfg_pull_up>,
+				/* uart7_tx_m0 */
+				<3 RK_PC4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<3 RK_PD2 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<3 RK_PD3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rx_m1 */
+				<1 RK_PB3 3 &pcfg_pull_up>,
+				/* uart7_tx_m1 */
+				<1 RK_PB4 3 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rx_m0 */
+				<3 RK_PB3 3 &pcfg_pull_up>,
+				/* uart8_tx_m0 */
+				<3 RK_PB2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<3 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rx_m1 */
+				<3 RK_PD5 3 &pcfg_pull_up>,
+				/* uart8_tx_m1 */
+				<3 RK_PD4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_ctsn: uart8m1-ctsn {
+			rockchip,pins =
+				/* uart8m1_ctsn */
+				<3 RK_PD7 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart8m1_rtsn: uart8m1-rtsn {
+			rockchip,pins =
+				/* uart8m1_rtsn */
+				<4 RK_PA0 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rx_m0 */
+				<4 RK_PB3 3 &pcfg_pull_up>,
+				/* uart9_tx_m0 */
+				<4 RK_PB2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<4 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<4 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rx_m1 */
+				<3 RK_PC3 3 &pcfg_pull_up>,
+				/* uart9_tx_m1 */
+				<3 RK_PC2 3 &pcfg_pull_up>;
+		};
+	};
+
+	vo {
+		/omit-if-no-ref/
+		vo_pins: vo-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d0 */
+				<4 RK_PA4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d1 */
+				<4 RK_PA5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d2 */
+				<4 RK_PB2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d8 */
+				<4 RK_PA6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d9 */
+				<4 RK_PA7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d16 */
+				<4 RK_PB0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d17 */
+				<4 RK_PB1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d18 */
+				<4 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	vo {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		bt656_pins: bt656-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb3x8_pins_m0: rgb3x8-pins-m0 {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb3x8_pins_m1: rgb3x8-pins-m1 {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb565_pins: rgb565-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb666_pins: rgb666-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d2 */
+				<4 RK_PB2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d18 */
+				<4 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3562.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562.dtsi
new file mode 100644
index 000000000000..def504ffa326
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3562.dtsi
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rk3562-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/reset/rockchip,rk3562-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3562";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
+	xin32k: clock-xin32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	xin24m: clock-xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <850000 850000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <925000 925000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1000000 1000000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-supported-hw = <0xf9 0xffff>;
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1037500 1037500 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000 1125000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1150000 1150000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000 900000 1000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <950000 950000 1000000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000 1000000 1000000>;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0x82000010>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3562-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			clocks = <&cru PCLK_PMU0_GPIO0>, <&cru DBCLK_PMU0_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff620000 0x0 0x100>;
+			clocks = <&cru PCLK_PERI_GPIO1>, <&cru DCLK_PERI_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff630000 0x0 0x100>;
+			clocks = <&cru PCLK_PERI_GPIO2>, <&cru DCLK_PERI_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ffac0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffac0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3_VCCIO156>, <&cru DCLK_BUS_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ffad0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffad0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO4_VCCIO156>, <&cru DCLK_BUS_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shmem@10f000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie2x1: pcie@fe000000 {
+			compatible = "rockchip,rk3562-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0xfe000000 0x0 0x400000>,
+			      <0x0 0xff500000 0x0 0x10000>,
+			      <0x0 0xfc000000 0x0 0x100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x0 0xff>;
+			clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+				 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+				 <&cru CLK_PCIE20_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk", "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie2x1_intc 0>,
+					<0 0 0 2 &pcie2x1_intc 1>,
+					<0 0 0 3 &pcie2x1_intc 2>,
+					<0 0 0 4 &pcie2x1_intc 3>;
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power 15>;
+			ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000
+				  0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000
+				  0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
+			resets = <&cru SRST_PCIE20_POWERUP>;
+			reset-names = "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie2x1_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gic: interrupt-controller@fe901000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfe901000 0 0x1000>,
+			      <0x0 0xfe902000 0 0x2000>,
+			      <0x0 0xfe904000 0 0x2000>,
+			      <0x0 0xfe906000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		qos_dma2ddr: qos@fee03800 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee03800 0x0 0x20>;
+		};
+
+		qos_mcu: qos@fee10000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10000 0x0 0x20>;
+		};
+
+		qos_dft_apb: qos@fee10100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10100 0x0 0x20>;
+		};
+
+		qos_gmac: qos@fee10200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10200 0x0 0x20>;
+		};
+
+		qos_mac100: qos@fee10300 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10300 0x0 0x20>;
+		};
+
+		qos_dcf: qos@fee10400 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10400 0x0 0x20>;
+		};
+
+		qos_cpu: qos@fee20000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee20000 0x0 0x20>;
+		};
+
+		qos_gpu: qos@fee30000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee30000 0x0 0x20>;
+		};
+
+		qos_npu: qos@fee40000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee40000 0x0 0x20>;
+		};
+
+		qos_rkvdec: qos@fee50000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee50000 0x0 0x20>;
+		};
+
+		qos_vepu: qos@fee60000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee60000 0x0 0x20>;
+		};
+
+		qos_isp: qos@fee70000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee70000 0x0 0x20>;
+		};
+
+		qos_vicap: qos@fee70100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee70100 0x0 0x20>;
+		};
+
+		qos_vop: qos@fee80000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee80000 0x0 0x20>;
+		};
+
+		qos_jpeg: qos@fee90000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90000 0x0 0x20>;
+		};
+
+		qos_rga_rd: qos@fee90100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90100 0x0 0x20>;
+		};
+
+		qos_rga_wr: qos@fee90200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90200 0x0 0x20>;
+		};
+
+		qos_pcie: qos@feea0000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeea0000 0x0 0x20>;
+		};
+
+		qos_usb3: qos@feea0100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeea0100 0x0 0x20>;
+		};
+
+		qos_crypto_apb: qos@feeb0000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0000 0x0 0x20>;
+		};
+
+		qos_crypto: qos@feeb0100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0100 0x0 0x20>;
+		};
+
+		qos_dmac: qos@feeb0200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0200 0x0 0x20>;
+		};
+
+		qos_emmc: qos@feeb0300 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0300 0x0 0x20>;
+		};
+
+		qos_fspi: qos@feeb0400 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0400 0x0 0x20>;
+		};
+
+		qos_rkdma: qos@feeb0500 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0500 0x0 0x20>;
+		};
+
+		qos_sdmmc0: qos@feeb0600 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0600 0x0 0x20>;
+		};
+
+		qos_sdmmc1: qos@feeb0700 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0700 0x0 0x20>;
+		};
+
+		qos_usb2: qos@feeb0800 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0800 0x0 0x20>;
+		};
+
+		pmu_grf: syscon@ff010000 {
+			compatible = "rockchip,rk3562-pmu-grf", "syscon", "simple-mfd";
+			reg = <0x0 0xff010000 0x0 0x10000>;
+
+			reboot_mode: reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x220>;
+				mode-normal = <BOOT_NORMAL>;
+				mode-loader = <BOOT_BL_DOWNLOAD>;
+				mode-recovery = <BOOT_RECOVERY>;
+				mode-bootloader = <BOOT_FASTBOOT>;
+			};
+		};
+
+		sys_grf: syscon@ff030000 {
+			compatible = "rockchip,rk3562-sys-grf", "syscon";
+			reg = <0x0 0xff030000 0x0 0x10000>;
+		};
+
+		peri_grf: syscon@ff040000 {
+			compatible = "rockchip,rk3562-peri-grf", "syscon";
+			reg = <0x0 0xff040000 0x0 0x10000>;
+		};
+
+		ioc_grf: syscon@ff060000 {
+			compatible = "rockchip,rk3562-ioc-grf", "syscon";
+			reg = <0x0 0xff060000 0x0 0x30000>;
+		};
+
+		usbphy_grf: syscon@ff090000 {
+			compatible = "rockchip,rk3562-usbphy-grf", "syscon";
+			reg = <0x0 0xff090000 0x0 0x8000>;
+		};
+
+		pipephy_grf: syscon@ff098000 {
+			compatible = "rockchip,rk3562-pipephy-grf", "syscon";
+			reg = <0x0 0xff098000 0x0 0x8000>;
+		};
+
+		cru: clock-controller@ff100000 {
+			compatible = "rockchip,rk3562-cru";
+			reg = <0x0 0xff100000 0x0 0x40000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+					  <&cru PLL_HPLL>;
+			assigned-clock-rates = <1188000000>, <1000000000>,
+					       <983040000>;
+		};
+
+		i2c0: i2c@ff200000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+			clocks = <&cru CLK_PMU0_I2C0>, <&cru PCLK_PMU0_I2C0>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@ff210000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff210000 0x0 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_PMU1_UART0>, <&cru PCLK_PMU1_UART0>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		spi0: spi@ff220000 {
+			compatible = "rockchip,rk3562-spi", "rockchip,rk3066-spi";
+			reg = <0x0 0xff220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_PMU1_SPI0>, <&cru PCLK_PMU1_SPI0>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 13>, <&dmac 12>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0m0_csn0 &spi0m0_csn1 &spi0m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@ff230000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230000 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@ff230010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230010 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@ff230020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230020 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm2m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@ff230030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230030 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm3m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu: power-management@ff258000 {
+			compatible = "rockchip,rk3562-pmu", "syscon", "simple-mfd";
+			reg = <0x0 0xff258000 0x0 0x1000>;
+
+			power: power-controller {
+				compatible = "rockchip,rk3562-power-controller";
+				#power-domain-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@8 {
+					reg = <8>;
+					pm_qos = <&qos_gpu>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@7 {
+					reg = <7>;
+					pm_qos = <&qos_npu>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@11 {
+					reg = <11>;
+					pm_qos = <&qos_rkvdec>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@12 {
+					reg = <12>;
+					pm_qos = <&qos_isp>,
+						 <&qos_vicap>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@10 {
+						reg = <10>;
+						pm_qos = <&qos_vepu>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				power-domain@13 {
+					reg = <13>;
+					pm_qos = <&qos_vop>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@14 {
+						reg = <14>;
+						pm_qos = <&qos_rga_rd>,
+							 <&qos_rga_wr>,
+							 <&qos_jpeg>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				power-domain@15 {
+					reg = <15>;
+					pm_qos = <&qos_pcie>,
+						 <&qos_usb3>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
+		gpu: gpu@ff320000 {
+			compatible = "rockchip,rk3562-mali", "arm,mali-bifrost";
+			reg = <0x0 0xff320000 0x0 0x4000>;
+			clocks = <&cru CLK_GPU>, <&cru CLK_GPU_BRG>,
+				 <&cru ACLK_GPU_PRE>;
+			clock-names = "clk_gpu", "clk_gpu_brg", "aclk_gpu";
+			dynamic-power-coefficient = <820>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&power 8>;
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		spi1: spi@ff640000 {
+			compatible = "rockchip,rk3066-spi";
+			reg = <0x0 0xff640000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 15>, <&dmac 14>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1m0_csn0 &spi1m0_csn1 &spi1m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@ff650000 {
+			compatible = "rockchip,rk3066-spi";
+			reg = <0x0 0xff650000 0x0 0x1000>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 17>, <&dmac 16>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2m0_csn0 &spi2m0_csn1 &spi2m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart1: serial@ff670000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff670000 0x0 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@ff680000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff680000 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@ff690000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff690000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@ff6a0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart5: serial@ff6b0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart6: serial@ff6c0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart7: serial@ff6d0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart8: serial@ff6e0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart9: serial@ff6f0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@ff700000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700000 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm4m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@ff700010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700010 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm5m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@ff700020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700020 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm6m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@ff700030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700030 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm7m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@ff710000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710000 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm8m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@ff710010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710010 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm9m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm10: pwm@ff710020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710020 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm10m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm11: pwm@ff710030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710030 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm11m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm12: pwm@ff720000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720000 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm12m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm13: pwm@ff720010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720010 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm13m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm14: pwm@ff720020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720020 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm14m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm15: pwm@ff720030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720030 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm15m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		saradc0: adc@ff730000 {
+			compatible = "rockchip,rk3562-saradc";
+			reg = <0x0 0xff730000 0x0 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+			clock-names = "saradc", "apb_pclk";
+			resets = <&cru SRST_P_SARADC>;
+			reset-names = "saradc-apb";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		combphy: phy@ff750000 {
+			compatible = "rockchip,rk3562-naneng-combphy";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_PIPEPHY_REF>, <&cru PCLK_PIPEPHY>,
+				 <&cru PCLK_PHP>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_PIPEPHY_REF>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PIPEPHY>;
+			reset-names = "phy";
+			rockchip,pipe-grf = <&peri_grf>;
+			rockchip,pipe-phy-grf = <&pipephy_grf>;
+			status = "disabled";
+		};
+
+		sfc: spi@ff860000 {
+			compatible = "rockchip,sfc";
+			reg = <0x0 0xff860000 0x0 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+			clock-names = "clk_sfc", "hclk_sfc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@ff870000 {
+			compatible = "rockchip,rk3562-dwcmshc", "rockchip,rk3588-dwcmshc";
+			reg = <0x0 0xff870000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&cru BCLK_EMMC>, <&cru CCLK_EMMC>;
+			assigned-clock-rates = <200000000>, <200000000>;
+			clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+				 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+				 <&cru TMCLK_EMMC>;
+			clock-names = "core", "bus", "axi", "block", "timer";
+			resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+				 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+				 <&cru SRST_T_EMMC>;
+			reset-names = "core", "bus", "axi", "block", "timer";
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@ff880000 {
+			compatible = "rockchip,rk3562-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xff880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru HCLK_SDMMC0>, <&cru CCLK_SDMMC0>,
+				 <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			max-frequency = <200000000>;
+			resets = <&cru SRST_H_SDMMC0>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@ff890000 {
+			compatible = "rockchip,rk3562-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xff890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru HCLK_SDMMC1>, <&cru CCLK_SDMMC1>,
+				 <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			max-frequency = <200000000>;
+			resets = <&cru SRST_H_SDMMC1>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		dmac: dma-controller@ff990000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff990000 0x0 0x4000>;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		i2c1: i2c@ffa00000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa00000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffa10000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa10000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffa20000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa20000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffa30000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa30000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@ffa40000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa40000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		saradc1: adc@ffaa0000 {
+			compatible = "rockchip,rk3562-saradc";
+			reg = <0x0 0xffaa0000 0x0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SARADC_VCCIO156>, <&cru PCLK_SARADC_VCCIO156>;
+			clock-names = "saradc", "apb_pclk";
+			resets = <&cru SRST_P_SARADC_VCCIO156>;
+			reset-names = "saradc-apb";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "rk3562-pinctrl.dtsi"
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 7d4680933823..decc6deeef4e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -19,9 +19,9 @@
 
 	aliases {
 		ethernet0 = &gmac1;
-		mmc0 = &sdmmc0;
-		mmc1 = &sdmmc1;
-		mmc2 = &sdhci;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
 	};
 
 	chosen: chosen {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
index 26cf765a7297..3473b1eef5cd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
@@ -867,6 +867,7 @@
 		spi-max-frequency = <100000000>;
 		spi-rx-bus-width = <2>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 3c127c5c2607..a9021c524afb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -30,6 +30,7 @@
 
 	fan: gpio_fan {
 		compatible = "gpio-fan";
+		fan-supply = <&vcc12v_dcin>;
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map =
 				<   0 0>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 5707321a1144..f8cf03380636 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -648,6 +648,7 @@
 		spi-max-frequency = <24000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
index 53e71528e4c4..6224d72813e5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
@@ -636,6 +636,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index b6ad8328c7eb..539edc3c535f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -20,33 +20,40 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
 
 		led-lan1 {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_LAN;
 			function-enumerator = <1>;
 			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+			label = "LAN-1";
 		};
 
 		led-lan2 {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_LAN;
 			function-enumerator = <2>;
 			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+			label = "LAN-2";
 		};
 
-		power_led: led-power {
+		power_led: led-sys {
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_POWER;
-			linux,default-trigger = "heartbeat";
 			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+			label = "SYS";
+			linux,default-trigger = "heartbeat";
 		};
 
 		led-wan {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_WAN;
 			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+			label = "WAN";
 		};
 	};
 };
@@ -58,6 +65,7 @@
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
 		     &gmac0_tx_bus2
@@ -125,7 +133,7 @@
 			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		power_led_pin: power-led-pin {
+		sys_led_pin: sys-led-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index 00c479aa1871..a28b4af10d13 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -486,9 +486,12 @@
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
 	non-removable;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index b80d628c426b..6ae4316761c4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -481,9 +481,14 @@
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@3 {
+		/* Motorcomm YT8521 phy */
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0>;
+		reg = <0x3>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <10000>;
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -556,6 +561,12 @@
 };
 
 &pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	keys {
 		copy_button_pin: copy-button-pin {
 			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 695cccbdab0f..e719a3df126c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -152,7 +152,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x10 0x1f>;
 		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
 			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
 			 <&cru CLK_PCIE30X1_AUX_NDFT>;
@@ -175,7 +175,7 @@
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;
 		max-link-speed = <3>;
-		msi-map = <0x0 &gic 0x1000 0x1000>;
+		msi-map = <0x1000 &its 0x1000 0x1000>;
 		num-lanes = <1>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
@@ -205,7 +205,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x20 0x2f>;
 		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
 			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
 			 <&cru CLK_PCIE30X2_AUX_NDFT>;
@@ -228,7 +228,7 @@
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;
 		max-link-speed = <3>;
-		msi-map = <0x0 &gic 0x2000 0x1000>;
+		msi-map = <0x2000 &its 0x2000 0x1000>;
 		num-lanes = <2>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
index 314067ba6f3c..801b40fea4e8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
@@ -56,6 +56,34 @@
 		};
 	};
 
+	es8388_sound: es8388-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "On-board Analog ES8388";
+		simple-audio-card,widgets = "Microphone", "Headphone Mic",
+					    "Microphone", "Mic Pads",
+					    "Headphone", "Headphone",
+					    "Line Out", "Line Out";
+		simple-audio-card,routing = "Headphone", "LOUT1",
+					    "Headphone", "ROUT1",
+					    "Line Out", "LOUT2",
+					    "Line Out", "ROUT2",
+					    "RINPUT1", "Headphone Mic",
+					    "LINPUT2", "Mic Pads",
+					    "RINPUT2", "Mic Pads";
+		simple-audio-card,pin-switches = "Headphone", "Line Out";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
 	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_12v0_dcin";
@@ -117,6 +145,8 @@
 
 	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
 		regulator-name = "vcc_3v3_pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -177,10 +207,42 @@
 	};
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
 &gmac0 {
 	phy-mode = "rgmii-id";
 	clock_in_out = "output";
@@ -241,6 +303,10 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &hdptxphy {
 	status = "okay";
 };
@@ -618,6 +684,25 @@
 	};
 };
 
+&i2c3 {
+	status = "okay";
+
+	es8388: audio-codec@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		AVDD-supply = <&vcca_3v3_s0>;
+		DVDD-supply = <&vcc_3v3_s0>;
+		HPVDD-supply = <&vcca_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sai1m0_mclk>;
+	};
+};
+
 &mdio0 {
 	rgmii_phy0: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -634,6 +719,14 @@
 	};
 };
 
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	headphone {
 		hp_det: hp-det {
@@ -655,6 +748,28 @@
 			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai1m0_lrck
+		     &sai1m0_sclk
+		     &sai1m0_sdi0
+		     &sai1m0_sdo0>;
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
 };
 
 &sdhci {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
index e368691fd28e..0902d694cef4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
@@ -128,7 +128,7 @@
 		vin-supply = <&vcc_3v3_s0>;
 	};
 
-	vcc3v3_pcie0: regulator-vcc3v3-pcie0 {
+	vcc3v3_pcie1: regulator-vcc3v3-pcie1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_pcie1";
 		regulator-min-microvolt = <3300000>;
@@ -691,6 +691,17 @@
 	};
 };
 
+&pcie1 {
+	reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie1>;
+
+	/*
+	 * Disable usb_drd1_dwc3 if enabling pcie1 and set Dial_Switch_1
+	 * to low state according to the schematic of page 17.
+	 */
+	status = "disabled";
+};
+
 &pinctrl {
 	usb {
 		usb_host_pwren: usb-host-pwren {
@@ -747,6 +758,10 @@
 	status = "okay";
 };
 
+&ufshc {
+	status = "okay";
+};
+
 &usbdp_phy {
 	rockchip,dp-lane-mux = <2 3>;
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
index 612b7bb0b749..d4e437ea6cd8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3576.dtsi"
 
@@ -54,6 +55,17 @@
 		};
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vbus5v0_typec: regulator-vbus5v0-typec {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -258,6 +270,26 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
 &mdio0 {
 	status = "okay";
 
@@ -734,3 +766,18 @@
 	pinctrl-0 = <&uart6m3_xfer>;
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index ebb5fc8bb8b1..64812e3bcb61 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -413,6 +413,90 @@
 		};
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3576-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@27320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x27320000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2ae10000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae10000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2ae20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae20000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2ae30000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae30000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2ae40000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae40000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	pmu_a53: pmu-a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -450,6 +534,114 @@
 		#size-cells = <2>;
 		ranges;
 
+		pcie0: pcie@22000000 {
+			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0x22000000 0x0 0x00400000>,
+			      <0x0 0x2a200000 0x0 0x00010000>,
+			      <0x0 0x20000000 0x0 0x00100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x0 0xf>;
+			clocks = <&cru ACLK_PCIE0_MST>, <&cru ACLK_PCIE0_SLV>,
+				 <&cru ACLK_PCIE0_DBI>, <&cru PCLK_PCIE0>,
+				 <&cru CLK_PCIE0_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk",
+				      "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+					<0 0 0 2 &pcie0_intc 1>,
+					<0 0 0 3 &pcie0_intc 2>,
+					<0 0 0 4 &pcie0_intc 3>;
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy0_ps PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3576_PD_PHP>;
+			ranges = <0x01000000 0x0 0x20100000 0x0 0x20100000 0x0 0x00100000
+				  0x02000000 0x0 0x20200000 0x0 0x20200000 0x0 0x00e00000
+				  0x03000000 0x9 0x00000000 0x9 0x00000000 0x0 0x80000000>;
+			resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+			reset-names = "pwr", "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie0_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		pcie1: pcie@22400000 {
+			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0x22400000 0x0 0x00400000>,
+			      <0x0 0x2a210000 0x0 0x00010000>,
+			      <0x0 0x21000000 0x0 0x00100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x20 0x2f>;
+			clocks = <&cru ACLK_PCIE1_MST>, <&cru ACLK_PCIE1_SLV>,
+				 <&cru ACLK_PCIE1_DBI>, <&cru PCLK_PCIE1>,
+				 <&cru CLK_PCIE1_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk",
+				      "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+					<0 0 0 2 &pcie1_intc 1>,
+					<0 0 0 3 &pcie1_intc 2>,
+					<0 0 0 4 &pcie1_intc 3>;
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy1_psu PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			ranges = <0x01000000 0x0 0x21100000 0x0 0x21100000 0x0 0x00100000
+				  0x02000000 0x0 0x21200000 0x0 0x21200000 0x0 0x00e00000
+				  0x03000000 0x9 0x80000000 0x9 0x80000000 0x0 0x80000000>;
+			resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+			reset-names = "pwr", "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie1_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
 		usb_drd0_dwc3: usb@23000000 {
 			compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
 			reg = <0x0 0x23000000 0x0 0x400000>;
@@ -1010,6 +1202,41 @@
 			status = "disabled";
 		};
 
+		sai5: sai@27d40000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27d40000 0x0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI5_8CH>, <&cru HCLK_SAI5_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 3>;
+			dma-names = "rx";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_M_SAI5_8CH>, <&cru SRST_H_SAI5_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-rx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI5";
+			status = "disabled";
+		};
+
+		sai6: sai@27d50000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27d50000 0x0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI6_8CH>, <&cru HCLK_SAI6_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 4>, <&dmac2 5>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_M_SAI6_8CH>, <&cru SRST_H_SAI6_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-rx-route = <0 1 2 3>;
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI6";
+			status = "disabled";
+		};
+
 		hdmi: hdmi@27da0000 {
 			compatible = "rockchip,rk3576-dw-hdmi-qp";
 			reg = <0x0 0x27da0000 0x0 0x20000>;
@@ -1034,6 +1261,7 @@
 			reset-names = "ref", "hdp";
 			rockchip,grf = <&ioc_grf>;
 			rockchip,vo-grf = <&vo0_grf>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 
 			ports {
@@ -1050,6 +1278,57 @@
 			};
 		};
 
+		sai7: sai@27ed0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ed0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI7_8CH>, <&cru HCLK_SAI7_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 19>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI7_8CH>, <&cru SRST_H_SAI7_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI7";
+			status = "disabled";
+		};
+
+		sai8: sai@27ee0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ee0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI8_8CH>, <&cru HCLK_SAI8_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 7>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI8_8CH>, <&cru SRST_H_SAI8_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI8";
+			status = "disabled";
+		};
+
+		sai9: sai@27ef0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ef0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI9_8CH>, <&cru HCLK_SAI9_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 26>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI9_8CH>, <&cru SRST_H_SAI9_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI9";
+			status = "disabled";
+		};
+
 		qos_hdcp1: qos@27f02000 {
 			compatible = "rockchip,rk3576-qos", "syscon";
 			reg = <0x0 0x27f02000 0x0 0x20>;
@@ -1334,6 +1613,36 @@
 			};
 		};
 
+		sata0: sata@2a240000 {
+			compatible = "rockchip,rk3576-dwc-ahci", "snps,dwc-ahci";
+			reg = <0x0 0x2a240000 0x0 0x1000>;
+			clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+				 <&cru CLK_RXOOB0>;
+			clock-names = "sata", "pmalive", "rxoob";
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			phys = <&combphy0_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@2a250000 {
+			compatible = "rockchip,rk3576-dwc-ahci", "snps,dwc-ahci";
+			reg = <0x0 0x2a250000 0x0 0x1000>;
+			clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+				 <&cru CLK_RXOOB1>;
+			clock-names = "sata", "pmalive", "rxoob";
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			phys = <&combphy1_psu PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		ufshc: ufshc@2a2d0000 {
 			compatible = "rockchip,rk3576-ufshc";
 			reg = <0x0 0x2a2d0000 0x0 0x10000>,
@@ -1364,6 +1673,7 @@
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru SCLK_FSPI1_X2>, <&cru HCLK_FSPI1>;
 			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_SDGMAC>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1414,11 +1724,20 @@
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru SCLK_FSPI_X2>, <&cru HCLK_FSPI>;
 			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_NVM>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		rng: rng@2a410000 {
+			compatible = "rockchip,rk3576-rng";
+			reg = <0x0 0x2a410000 0x0 0x200>;
+			clocks = <&cru HCLK_TRNG_NS>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cru SRST_H_TRNG_NS>;
+		};
+
 		otp: otp@2a580000 {
 			compatible = "rockchip,rk3576-otp";
 			reg = <0x0 0x2a580000 0x0 0x400>;
@@ -1458,6 +1777,120 @@
 			};
 		};
 
+		sai0: sai@2a600000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI0_8CH>, <&cru HCLK_SAI0_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 0>, <&dmac0 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI0_8CH>, <&cru SRST_H_SAI0_8CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai0m0_lrck
+				&sai0m0_sclk
+				&sai0m0_sdi0
+				&sai0m0_sdi1
+				&sai0m0_sdi2
+				&sai0m0_sdi3
+				&sai0m0_sdo0
+				&sai0m0_sdo1
+				&sai0m0_sdo2
+				&sai0m0_sdo3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI0";
+			status = "disabled";
+		};
+
+		sai1: sai@2a610000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a610000 0x0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI1_8CH>, <&cru HCLK_SAI1_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 2>, <&dmac0 3>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI1_8CH>, <&cru SRST_H_SAI1_8CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai1m0_lrck
+				&sai1m0_sclk
+				&sai1m0_sdi0
+				&sai1m0_sdo0
+				&sai1m0_sdo1
+				&sai1m0_sdo2
+				&sai1m0_sdo3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI1";
+			status = "disabled";
+		};
+
+		sai2: sai@2a620000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a620000 0x0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI2_2CH>, <&cru HCLK_SAI2_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 0>, <&dmac1 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI2_2CH>, <&cru SRST_H_SAI2_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai2m0_lrck
+				&sai2m0_sclk
+				&sai2m0_sdi
+				&sai2m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI2";
+			status = "disabled";
+		};
+
+		sai3: sai@2a630000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a630000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI3_2CH>, <&cru HCLK_SAI3_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 2>, <&dmac1 3>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI3_2CH>, <&cru SRST_H_SAI3_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai3m0_lrck
+				&sai3m0_sclk
+				&sai3m0_sdi
+				&sai3m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI3";
+			status = "disabled";
+		};
+
+		sai4: sai@2a640000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a640000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI4_2CH>, <&cru HCLK_SAI4_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 0>, <&dmac2 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI4_2CH>, <&cru SRST_H_SAI4_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai4m0_lrck
+				&sai4m0_sclk
+				&sai4m0_sdi
+				&sai4m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI4";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@2a701000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0x2a701000 0 0x10000>,
@@ -1569,7 +2002,6 @@
 			status = "disabled";
 		};
 
-
 		i2c6: i2c@2ac90000 {
 			compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
 			reg = <0x0 0x2ac90000 0x0 0x1000>;
@@ -1984,74 +2416,6 @@
 			compatible = "arm,scmi-shmem";
 			reg = <0x0 0x4010f000 0x0 0x100>;
 		};
-
-		pinctrl: pinctrl {
-			compatible = "rockchip,rk3576-pinctrl";
-			rockchip,grf = <&ioc_grf>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			gpio0: gpio@27320000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x27320000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 0 32>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio1: gpio@2ae10000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae10000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 32 32>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@2ae20000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae20000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 64 32>;
-				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@2ae30000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae30000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 96 32>;
-				interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@2ae40000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae40000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 128 32>;
-				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-		};
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
index 779cd1b1798c..6ad2759ddcca 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-armsom-lm7.dtsi"
 
 / {
@@ -32,6 +33,28 @@
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -138,6 +161,54 @@
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -192,6 +263,14 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
@@ -406,3 +485,25 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
index 7f874c77410c..6584d73660f6 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
@@ -578,14 +578,14 @@
 		hdmim0_tx0_scl: hdmim0-tx0-scl {
 			rockchip,pins =
 				/* hdmim0_tx0_scl */
-				<4 RK_PB7 5 &pcfg_pull_none>;
+				<4 RK_PB7 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim0_tx0_sda: hdmim0-tx0-sda {
 			rockchip,pins =
 				/* hdmim0_tx0_sda */
-				<4 RK_PC0 5 &pcfg_pull_none>;
+				<4 RK_PC0 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -640,14 +640,14 @@
 		hdmim1_tx0_scl: hdmim1-tx0-scl {
 			rockchip,pins =
 				/* hdmim1_tx0_scl */
-				<0 RK_PD5 11 &pcfg_pull_none>;
+				<0 RK_PD5 11 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim1_tx0_sda: hdmim1-tx0-sda {
 			rockchip,pins =
 				/* hdmim1_tx0_sda */
-				<0 RK_PD4 11 &pcfg_pull_none>;
+				<0 RK_PD4 11 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -668,14 +668,14 @@
 		hdmim1_tx1_scl: hdmim1-tx1-scl {
 			rockchip,pins =
 				/* hdmim1_tx1_scl */
-				<3 RK_PC6 5 &pcfg_pull_none>;
+				<3 RK_PC6 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim1_tx1_sda: hdmim1-tx1-sda {
 			rockchip,pins =
 				/* hdmim1_tx1_sda */
-				<3 RK_PC5 5 &pcfg_pull_none>;
+				<3 RK_PC5 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 		/omit-if-no-ref/
 		hdmim2_rx_cec: hdmim2-rx-cec {
@@ -709,14 +709,14 @@
 		hdmim2_tx0_scl: hdmim2-tx0-scl {
 			rockchip,pins =
 				/* hdmim2_tx0_scl */
-				<3 RK_PC7 5 &pcfg_pull_none>;
+				<3 RK_PC7 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim2_tx0_sda: hdmim2-tx0-sda {
 			rockchip,pins =
 				/* hdmim2_tx0_sda */
-				<3 RK_PD0 5 &pcfg_pull_none>;
+				<3 RK_PD0 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -730,14 +730,14 @@
 		hdmim2_tx1_scl: hdmim2-tx1-scl {
 			rockchip,pins =
 				/* hdmim2_tx1_scl */
-				<1 RK_PA4 5 &pcfg_pull_none>;
+				<1 RK_PA4 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim2_tx1_sda: hdmim2-tx1-sda {
 			rockchip,pins =
 				/* hdmim2_tx1_sda */
-				<1 RK_PA3 5 &pcfg_pull_none>;
+				<1 RK_PA3 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 1e18ad93ba0e..70f03e68ba55 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/rockchip,rk3588-cru.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/rk3588-power.h>
 #include <dt-bindings/reset/rockchip,rk3588-cru.h>
 #include <dt-bindings/phy/phy.h>
@@ -95,8 +96,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <530>;
 			clocks = <&scmi_clk SCMI_CLK_CPUL>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <32768>;
 			i-cache-line-size = <64>;
@@ -173,8 +172,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -213,8 +210,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -439,16 +434,15 @@
 		#clock-cells = <0>;
 	};
 
-	pmu_sram: sram@10f000 {
-		compatible = "mmio-sram";
-		reg = <0x0 0x0010f000 0x0 0x100>;
-		ranges = <0 0x0 0x0010f000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		scmi_shmem: sram@0 {
+		scmi_shmem: shmem@10f000 {
 			compatible = "arm,scmi-shmem";
-			reg = <0x0 0x100>;
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
 		};
 	};
 
@@ -590,6 +584,16 @@
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	mipidcphy0_grf: syscon@fd5e8000 {
+		compatible = "rockchip,rk3588-dcphy-grf", "syscon";
+		reg = <0x0 0xfd5e8000 0x0 0x4000>;
+	};
+
+	mipidcphy1_grf: syscon@fd5ec000 {
+		compatible = "rockchip,rk3588-dcphy-grf", "syscon";
+		reg = <0x0 0xfd5ec000 0x0 0x4000>;
+	};
+
 	vop_grf: syscon@fd5a4000 {
 		compatible = "rockchip,rk3588-vop-grf", "syscon";
 		reg = <0x0 0xfd5a4000 0x0 0x2000>;
@@ -1412,6 +1416,62 @@
 		status = "disabled";
 	};
 
+	dsi0: dsi@fde20000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST0>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fde30000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST1>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy1 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi0: hdmi@fde80000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfde80000 0x0 0x20000>;
@@ -1454,6 +1514,34 @@
 		};
 	};
 
+	edp0: edp@fdec0000 {
+		compatible = "rockchip,rk3588-edp";
+		reg = <0x0 0xfdec0000 0x0 0x1000>;
+		clocks = <&cru CLK_EDP0_24M>, <&cru PCLK_EDP0>;
+		clock-names = "dp", "pclk";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+		phys = <&hdptxphy0>;
+		phy-names = "dp";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_EDP0_24M>, <&cru SRST_P_EDP0>;
+		reset-names = "dp", "apb";
+		rockchip,grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp0_in: port@0 {
+				reg = <0>;
+			};
+
+			edp0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	qos_gpu_m0: qos@fdf35000 {
 		compatible = "rockchip,rk3588-qos", "syscon";
 		reg = <0x0 0xfdf35000 0x0 0x20>;
@@ -1970,7 +2058,7 @@
 		reg = <0x0 0xfe378000 0x0 0x200>;
 		interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&scmi_clk SCMI_HCLK_SECURE_NS>;
-		resets = <&scmi_reset 48>;
+		resets = <&scmi_reset SCMI_SRST_H_TRNG_NS>;
 	};
 
 	i2s0_8ch: i2s@fe470000 {
@@ -2935,6 +3023,38 @@
 		status = "disabled";
 	};
 
+	mipidcphy0: phy@feda0000 {
+		compatible = "rockchip,rk3588-mipi-dcphy";
+		reg = <0x0 0xfeda0000 0x0 0x10000>;
+		rockchip,grf = <&mipidcphy0_grf>;
+		clocks = <&cru PCLK_MIPI_DCPHY0>,
+			 <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>;
+		clock-names = "pclk", "ref";
+		resets = <&cru SRST_M_MIPI_DCPHY0>,
+			 <&cru SRST_P_MIPI_DCPHY0>,
+			 <&cru SRST_P_MIPI_DCPHY0_GRF>,
+			 <&cru SRST_S_MIPI_DCPHY0>;
+		reset-names = "m_phy", "apb", "grf", "s_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	mipidcphy1: phy@fedb0000 {
+		compatible = "rockchip,rk3588-mipi-dcphy";
+		reg = <0x0 0xfedb0000 0x0 0x10000>;
+		rockchip,grf = <&mipidcphy1_grf>;
+		clocks = <&cru PCLK_MIPI_DCPHY1>,
+			 <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>;
+		clock-names = "pclk", "ref";
+		resets = <&cru SRST_M_MIPI_DCPHY1>,
+			 <&cru SRST_P_MIPI_DCPHY1>,
+			 <&cru SRST_P_MIPI_DCPHY1_GRF>,
+			 <&cru SRST_S_MIPI_DCPHY1>;
+		reset-names = "m_phy", "apb", "grf", "s_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
 	combphy0_ps: phy@fee00000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee00000 0x0 0x100>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index 9eda69722665..3d5c8b753208 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -23,17 +23,28 @@
 		pwms = <&pwm2 0 25000 0>;
 	};
 
-	hdmi-con {
+	hdmi0-con {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con_in: endpoint {
+			hdmi0_con_in: endpoint {
 				remote-endpoint = <&hdmi0_out_con>;
 			};
 		};
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 
@@ -117,6 +128,10 @@
 	status = "okay";
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdmi0_in {
 	hdmi0_in_vp0: endpoint {
 		remote-endpoint = <&vp0_out_hdmi0>;
@@ -125,14 +140,48 @@
 
 &hdmi0_out {
 	hdmi0_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
 	};
 };
 
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
 
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 /* M.2 E-Key */
 &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -261,3 +310,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
index 6dc10da5215f..738637ecaf55 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -148,6 +148,40 @@
 	};
 };
 
+&edp1 {
+	force-hpd;
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			hpd-absent-delay-ms = <200>;
+			no-hpd;
+			backlight = <&backlight>;
+			power-supply = <&vcc3v3_lcd>;
+
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp1_in {
+	edp1_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp1>;
+	};
+};
+
+&edp1_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
+	};
+};
+
+
 /* HDMI CEC is not used */
 &hdmi0 {
 	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
@@ -170,6 +204,10 @@
 	status = "okay";
 };
 
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c4 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -383,6 +421,8 @@
 };
 
 &vop {
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
 	status = "okay";
 };
 
@@ -396,3 +436,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp2 {
+	vp2_out_edp1: endpoint@ROCKCHIP_VOP2_EP_EDP1 {
+		reg = <ROCKCHIP_VOP2_EP_EDP1>;
+		remote-endpoint = <&edp1_in_vp2>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
index cc37f082adea..b07543315f87 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -321,6 +321,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
new file mode 100644
index 000000000000..91fe810d38d8
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
@@ -0,0 +1,931 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB2 V10 Board";
+	compatible = "rockchip,rk3588-evb2-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	non-removable;
+	no-sd;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <2>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc5v0_sys>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-coupled-with = <&vdd_gpu_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_gpu_mem_s0: dcdc-reg5 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+				regulator-name = "vdd_gpu_mem_s0";
+				regulator-coupled-with = <&vdd_gpu_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_npu_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vdd_vdenc_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v1_nldo_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v1_nldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1_1v8_ddr_s3: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd1_1v8_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_codec_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_codec_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_1v8_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd2l_0v9_ddr_s3: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd2l_0v9_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_0v75_hdmi_edp_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_hdmi_edp_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pmic@1 {
+		compatible = "rockchip,rk806";
+		reg = <0x01>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
+			    <&rk806_slave_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_slave_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big1_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big0_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big1_mem_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+
+			vdd_cpu_big0_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_cam_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd1v8_ddr_pll_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd1v8_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_1v8_pll_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_1v8_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_sd_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_2v8_cam_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_2v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_pll_s0: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_cam_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
index 244c66faa161..fb48ddc04bcb 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
@@ -160,14 +160,15 @@
 		hdmim0_tx1_scl: hdmim0-tx1-scl {
 			rockchip,pins =
 				/* hdmim0_tx1_scl */
-				<2 RK_PB5 4 &pcfg_pull_none>;
+				<2 RK_PB5 4 &pcfg_pull_none_drv_level_3_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim0_tx1_sda: hdmim0-tx1-sda {
 			rockchip,pins =
 				/* hdmim0_tx1_sda */
-				<2 RK_PB4 4 &pcfg_pull_none>;
+				<2 RK_PB4 4 &pcfg_pull_none_drv_level_1_smt>;
+
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 099edb3fd0f6..90414486e466 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -252,6 +252,34 @@
 		};
 	};
 
+	edp1: edp@fded0000 {
+		compatible = "rockchip,rk3588-edp";
+		reg = <0x0 0xfded0000 0x0 0x1000>;
+		clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>;
+		clock-names = "dp", "pclk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+		phys = <&hdptxphy1>;
+		phy-names = "dp";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_EDP1_24M>, <&cru SRST_P_EDP1>;
+		reset-names = "dp", "apb";
+		rockchip,grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp1_in: port@0 {
+				reg = <0>;
+			};
+
+			edp1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi_receiver: hdmi_receiver@fdee0000 {
 		compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
 		reg = <0x0 0xfdee0000 0x0 0x6000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index 9fceea6c1398..ebe77cdd24e8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -303,6 +303,10 @@
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -512,6 +516,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@6 {
 		/* KSZ9031 or KSZ9131 */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index bbe500cc924b..3d8b6f0c5541 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -52,6 +52,17 @@
 		};
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -163,8 +174,6 @@
 		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&typec5v_pwren>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-name = "vbus5v0_typec";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -177,8 +186,6 @@
 		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb5v_pwren>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-name = "vbus5v0_usb";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -360,10 +367,38 @@
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
 
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -426,24 +461,30 @@
 };
 
 &i2c6 {
-	clock-frequency = <200000>;
 	status = "okay";
 
-	fusb302: typec-portc@22 {
+	usbc0: usb-typec@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&usbc0_int>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
 		vbus-supply = <&vbus5v0_typec>;
+		status = "okay";
 
 		connector {
 			compatible = "usb-c-connector";
 			data-role = "dual";
 			label = "USB-C";
-			power-role = "source";
+			op-sink-microwatt = <1000000>;
+			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+			power-role = "dual";
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+			typec-power-opmode = "1.5A";
 
 			ports {
 				#address-cells = <1>;
@@ -531,6 +572,14 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &pcie2x1l0 {
 	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc_3v3_pcie20>;
@@ -1088,9 +1137,8 @@
 };
 
 &usb_host0_xhci {
-	dr_mode = "host";
-	status = "okay";
 	usb-role-switch;
+	status = "okay";
 
 	port {
 		usb_host0_xhci_drd_sw: endpoint {
@@ -1126,3 +1174,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
index f748c6f760d8..9343dfc86941 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
@@ -87,6 +87,20 @@
 			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wireless-bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm4 {
@@ -120,6 +134,28 @@
 	phy-supply = <&vcc5v0_usb20>;
 };
 
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
+		shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
 &usb_host0_xhci {
 	dr_mode = "host";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
new file mode 100644
index 000000000000..74c7b6502e4d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b.dtsi"
+
+/ {
+	model = "Radxa ROCK 5B+";
+	compatible = "radxa,rock-5b-plus", "rockchip,rk3588";
+
+	rfkill-wwan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-wwan";
+		radio-type = "wwan";
+		shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc3v3_4g: regulator-vcc3v3-4g {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		/* pinctrl for the GPIO is requested by vcc3v3_pcie2x1l0 */
+		regulator-name = "vcc3v3_4g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_wwan_pwr: regulator-vcc3v3-wwan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_power_en>;
+		regulator-name = "vcc3v3_wwan_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_4g>;
+	};
+};
+
+&gpio0 {
+	wwan-disable2-n-hog {
+		gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "M.2 B-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&gpio2 {
+	wwan-reset-n-hog {
+		gpios = <RK_PB3 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "M.2 B-key RESET#";
+		gpio-hog;
+	};
+
+	wwan-wake-n-hog {
+		gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "M.2 B-key WoWWAN#";
+		gpio-hog;
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <2>;
+};
+
+&pinctrl {
+	wwan {
+		wwan_power_en: wwan-pwr-en {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index d22068475c5d..9407a7c9910a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -2,532 +2,11 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
-#include "rk3588.dtsi"
+#include "rk3588-rock-5b.dtsi"
 
 / {
 	model = "Radxa ROCK 5B";
 	compatible = "radxa,rock-5b", "rockchip,rk3588";
-
-	aliases {
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-		mmc2 = &sdio;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	analog-sound {
-		compatible = "audio-graph-card";
-		label = "rk3588-es8316";
-
-		widgets = "Microphone", "Mic Jack",
-			  "Headphone", "Headphones";
-
-		routing = "MIC2", "Mic Jack",
-			  "Headphones", "HPOL",
-			  "Headphones", "HPOR";
-
-		dais = <&i2s0_8ch_p0>;
-		hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_detect>;
-	};
-
-	hdmi0-con {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi0_con_in: endpoint {
-				remote-endpoint = <&hdmi0_out_con>;
-			};
-		};
-	};
-
-	hdmi1-con {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi1_con_in: endpoint {
-				remote-endpoint = <&hdmi1_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_rgb_b>;
-
-		led_rgb_b {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 120 150 180 210 240 255>;
-		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm1 0 50000 0>;
-		#cooling-cells = <2>;
-	};
-
-	rfkill {
-		compatible = "rfkill-gpio";
-		label = "rfkill-m2-wlan";
-		radio-type = "wlan";
-		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
-	};
-
-	rfkill-bt {
-		compatible = "rfkill-gpio";
-		label = "rfkill-m2-bt";
-		radio-type = "bluetooth";
-		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
-	};
-
-	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie2_0_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie2x1l0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_pcie2x1l2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie3_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie30";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_host";
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: regulator-vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v1_nldo_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy1_ps {
-	status = "okay";
-};
-
-&combphy2_psu {
-	status = "okay";
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu_s0>;
-	status = "okay";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi0_in {
-	hdmi0_in_vp0: endpoint {
-		remote-endpoint = <&vp0_out_hdmi0>;
-	};
-};
-
-&hdmi0_out {
-	hdmi0_out_con: endpoint {
-		remote-endpoint = <&hdmi0_con_in>;
-	};
-};
-
-&hdmi0_sound {
-	status = "okay";
-};
-
-&hdmi1 {
-	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
-		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
-	status = "okay";
-};
-
-&hdmi1_in {
-	hdmi1_in_vp1: endpoint {
-		remote-endpoint = <&vp1_out_hdmi1>;
-	};
-};
-
-&hdmi1_out {
-	hdmi1_out_con: endpoint {
-		remote-endpoint = <&hdmi1_con_in>;
-	};
-};
-
-&hdmi1_sound {
-	status = "okay";
-};
-
-&hdmi_receiver_cma {
-	status = "okay";
-};
-
-&hdmi_receiver {
-	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
-	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hdptxphy0 {
-	status = "okay";
-};
-
-&hdptxphy1 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-source;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	es8316: audio-codec@11 {
-		compatible = "everest,es8316";
-		reg = <0x11>;
-		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
-		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
-		assigned-clock-rates = <12288000>;
-		#sound-dai-cells = <0>;
-
-		port {
-			es8316_p0_0: endpoint {
-				remote-endpoint = <&i2s0_8ch_p0_0>;
-			};
-		};
-	};
-};
-
-&i2s0_8ch {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_lrck
-		     &i2s0_mclk
-		     &i2s0_sclk
-		     &i2s0_sdi0
-		     &i2s0_sdo0>;
-	status = "okay";
-
-	i2s0_8ch_p0: port {
-		i2s0_8ch_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&i2s5_8ch {
-	status = "okay";
-};
-
-&i2s6_8ch {
-	status = "okay";
-};
-
-&package_thermal {
-	polling-delay = <1000>;
-
-	trips {
-		package_fan0: package-fan0 {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		package_fan1: package-fan1 {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&package_fan0>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map1 {
-			trip = <&package_fan1>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&pcie2x1l0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_0_rst>;
-	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
-	status = "okay";
-};
-
-&pcie2x1l2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_2_rst>;
-	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
-	status = "okay";
-};
-
-&pcie30phy {
-	status = "okay";
-};
-
-&pcie3x4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie3_rst>;
-	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie30>;
-	status = "okay";
-};
-
-&pd_gpu {
-	domain-supply = <&vdd_gpu_s0>;
-};
-
-&pinctrl {
-	hdmirx {
-		hdmirx_hpd: hdmirx-5v-detection {
-			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		led_rgb_b: led-rgb-b {
-			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sound {
-		hp_detect: hp-detect {
-			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie2 {
-		pcie2_0_rst: pcie2-0-rst {
-			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
-			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie2_2_rst: pcie2-2-rst {
-			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie3 {
-		pcie3_rst: pcie3-rst {
-			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
-			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&avcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
-};
-
-&sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
 };
 
 &sdio {
@@ -551,434 +30,23 @@
 	status = "okay";
 };
 
-&sfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&fspim2_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
 &uart6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
 	status = "okay";
 };
 
-&spi2 {
-	status = "okay";
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-	num-cs = <1>;
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		spi-max-frequency = <1000000>;
-		reg = <0x0>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vcc_1v1_nldo_s3>;
-		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
-		};
-
-		regulators {
-			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_gpu_s0";
-				regulator-enable-ramp-delay = <400>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_cpu_lit_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_log_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_vdenc_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vdd2_ddr_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_2v0_pldo_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_3v3_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vddq_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "avcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-name = "avdd_1v2_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vcc_3v3_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vccio_sd_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "pldo6_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "vdd_ddr_pll_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "avdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "vdd_0v85_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
+&pinctrl {
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
 
-&tsadc {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u2phy1_otg {
-	status = "okay";
-};
-
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	/* connected to USB hub, which is powered by vcc5v0_sys */
-	phy-supply = <&vcc5v0_sys>;
-	status = "okay";
-};
-
-&u2phy3 {
-	status = "okay";
-};
-
-&u2phy3_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&usbdp_phy1 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usb_host1_xhci {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb_host2_xhci {
-	status = "okay";
-};
-
-&vop {
-	status = "okay";
-};
-
-&vop_mmu {
-	status = "okay";
-};
-
-&vp0 {
-	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-		remote-endpoint = <&hdmi0_in_vp0>;
-	};
-};
-
-&vp1 {
-	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
-		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
-		remote-endpoint = <&hdmi1_in_vp1>;
-	};
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
new file mode 100644
index 000000000000..6052787d2560
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
@@ -0,0 +1,945 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_b>;
+
+		led_rgb_b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 120 150 180 210 240 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	};
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-bt";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_rgb_b: led-rgb-b {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_rst: pcie3-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc5v0_sys */
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
new file mode 100644
index 000000000000..b8636fcb4f39
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Cherry Embedded Solutions GmbH
+ *
+ * DEVKIT ADDON CAM-TS-A01
+ * https://embedded.cherry.de/product/development-kit/
+ *
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Tiger system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&dc_12v>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	vcc1v8_video: regulator-vcc1v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc2v8_video: regulator-vcc2v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc2v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	video-adapter-leds {
+		compatible = "gpio-leds";
+
+		video-adapter-led {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+			label = "video-adapter-led";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc1v8_video>;
+		reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc2v8_video>;
+
+		port {
+			mipi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp3: endpoint {
+		remote-endpoint = <&vp3_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_panel: endpoint {
+		remote-endpoint = <&mipi_panel_in>;
+	};
+};
+
+&i2c6 {
+	/* OV5675, GT911, DW9714 are limited to 400KHz */
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int>;
+		reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc2v8_video>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	pca9670: gpio@27 {
+		compatible = "nxp,pca9670";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9670_resetn>;
+		reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mipidcphy0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pca9670 {
+		pca9670_resetn: pca9670-resetn {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vp3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp3>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
index a3d8ff647839..caa43d1abf17 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
@@ -189,6 +189,10 @@
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -228,6 +232,10 @@
 	status = "okay";
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &pcie30phy {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
index 8b717c4017a4..b2947b36fada 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -474,6 +474,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
index 9f4aca9c2e3f..0df3e80f2dd9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
 
@@ -238,6 +239,42 @@
 	status = "okay";
 };
 
+&edp0 {
+	force-hpd;
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			backlight = <&backlight>;
+			power-supply = <&vcc3v3_lcd_edp>;
+			no-hpd;
+
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp0_in {
+	edp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp0>;
+	};
+};
+
+&edp0_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
 &i2c3 {
 	status = "okay";
 
@@ -403,6 +440,7 @@
 };
 
 &pwm12 {
+	pinctrl-0 = <&pwm12m1_pins>;
 	status = "okay";
 };
 
@@ -1172,3 +1210,20 @@
 		};
 	};
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
+	status = "okay";
+};
+
+&vp2 {
+	vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
+		reg = <ROCKCHIP_VOP2_EP_EDP0>;
+		remote-endpoint = <&edp0_in_vp2>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 4189a88ecf40..4ec7bc4a9e96 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -278,6 +278,10 @@
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -449,6 +453,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &pcie2x1l2 {
 	pinctrl-0 = <&rtl8111_perstb>;
 	pinctrl-names = "default";
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 88a5e822ed17..2c22abaf40a8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -6,6 +6,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -42,6 +43,17 @@
 		pinctrl-0 = <&ir_receiver_pin>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "pwm-leds";
 
@@ -181,6 +193,34 @@
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -233,6 +273,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &pd_gpu {
 	domain-supply = <&vdd_gpu_s0>;
 };
@@ -697,8 +741,24 @@
 
 &uart9 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
 };
 
 &u2phy2 {
@@ -738,3 +798,18 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
index 5c645437b507..b0475b7c655a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
@@ -332,6 +332,41 @@
 		input-schmitt-enable;
 	};
 
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_1_smt: pcfg-pull-none-drv-level-1-smt {
+		bias-disable;
+		drive-strength = <1>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_2_smt: pcfg-pull-none-drv-level-2-smt {
+		bias-disable;
+		drive-strength = <2>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_3_smt: pcfg-pull-none-drv-level-3-smt {
+		bias-disable;
+		drive-strength = <3>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_4_smt: pcfg-pull-none-drv-level-4-smt {
+		bias-disable;
+		drive-strength = <4>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_5_smt: pcfg-pull-none-drv-level-5-smt {
+		bias-disable;
+		drive-strength = <5>;
+		input-schmitt-enable;
+	};
+
 	/omit-if-no-ref/
 	pcfg_output_high: pcfg-output-high {
 		output-high;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 8fdd5f020425..aba90d555f4e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -82,6 +82,57 @@
 		};
 	};
 
+	ospi_port1_clk_pins_a: ospi-port1-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* OSPI1_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	ospi_port1_clk_sleep_pins_a: ospi-port1-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>; /* OSPI1_CLK */
+		};
+	};
+
+	ospi_port1_cs0_pins_a: ospi-port1-cs0-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 3, AF10)>; /* OSPI_NCS0 */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	ospi_port1_cs0_sleep_pins_a: ospi-port1-cs0-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 3, ANALOG)>; /* OSPI_NCS0 */
+		};
+	};
+
+	ospi_port1_io03_pins_a: ospi-port1-io03-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, AF10)>, /* OSPI_IO0 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* OSPI_IO1 */
+				 <STM32_PINMUX('D', 6, AF10)>, /* OSPI_IO2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* OSPI_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	ospi_port1_io03_sleep_pins_a: ospi-port1-io03-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* OSPI_IO0 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* OSPI_IO1 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* OSPI_IO2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* OSPI_IO3 */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 87110f91e489..8d87865850a7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -229,6 +229,60 @@
 			#dma-cells = <3>;
 		};
 
+		ommanager: ommanager@40500000 {
+			compatible = "st,stm32mp25-omm";
+			reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+			reg-names = "regs", "memory_map";
+			ranges = <0 0 0x40430000 0x400>,
+				 <1 0 0x40440000 0x400>;
+			clocks = <&rcc CK_BUS_OSPIIOM>,
+				 <&scmi_clk CK_SCMI_OSPI1>,
+				 <&scmi_clk CK_SCMI_OSPI2>;
+			clock-names = "omm", "ospi1", "ospi2";
+			resets = <&rcc OSPIIOM_R>,
+				 <&scmi_reset RST_SCMI_OSPI1>,
+				 <&scmi_reset RST_SCMI_OSPI2>;
+			reset-names = "omm", "ospi1", "ospi2";
+			access-controllers = <&rifsc 111>;
+			power-domains = <&CLUSTER_PD>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+			status = "disabled";
+
+			ospi1: spi@0 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <0 0 0x400>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 2 0x62 0x3121>,
+				       <&hpdma 2 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI1>;
+				resets = <&scmi_reset RST_SCMI_OSPI1>,
+					 <&scmi_reset RST_SCMI_OSPI1DLL>;
+				access-controllers = <&rifsc 74>;
+				power-domains = <&CLUSTER_PD>;
+				st,syscfg-dlyb = <&syscfg 0x1000>;
+				status = "disabled";
+			};
+
+			ospi2: spi@1 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <1 0 0x400>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 3 0x62 0x3121>,
+				       <&hpdma 3 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI2>;
+				resets = <&scmi_reset RST_SCMI_OSPI2>,
+					 <&scmi_reset RST_SCMI_OSPI2DLL>;
+				access-controllers = <&rifsc 75>;
+				power-domains = <&CLUSTER_PD>;
+				st,syscfg-dlyb = <&syscfg 0x1400>;
+				status = "disabled";
+			};
+		};
+
 		rifsc: bus@42080000 {
 			compatible = "st,stm32mp25-rifsc", "simple-bus";
 			reg = <0x42080000 0x1000>;
@@ -237,6 +291,78 @@
 			#access-controller-cells = <1>;
 			ranges;
 
+			lptimer1: timer@40090000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x40090000 0x400>;
+				interrupts-extended = <&exti1 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM1>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 17>;
+				power-domains = <&RET_PD>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@0 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+			};
+
+			lptimer2: timer@400a0000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x400a0000 0x400>;
+				interrupts-extended = <&exti1 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM2>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 18>;
+				power-domains = <&RET_PD>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+			};
+
 			i2s2: audio-controller@400b0000 {
 				compatible = "st,stm32mp25-i2s";
 				reg = <0x400b0000 0x400>;
@@ -798,6 +924,111 @@
 				status = "disabled";
 			};
 
+			lptimer3: timer@46050000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46050000 0x400>;
+				interrupts-extended = <&exti2 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM3>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 19>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@2 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			lptimer4: timer@46060000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46060000 0x400>;
+				interrupts-extended = <&exti2 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM4>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 20>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@3 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
+			};
+
+			lptimer5: timer@46070000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46070000 0x400>;
+				interrupts-extended = <&exti2 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM5>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 21>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@4 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+
 			csi: csi@48020000 {
 				compatible = "st,stm32mp25-csi";
 				reg = <0x48020000 0x2000>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 1b88485a62a1..2f561ad40665 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -80,6 +80,11 @@
 			reg = <0x0 0x80000000 0x0 0x4000000>;
 			no-map;
 		};
+
+		mm_ospi1: mm-ospi@60000000 {
+			reg = <0x0 0x60000000 0x0 0x10000000>;
+			no-map;
+		};
 	};
 };
 
@@ -190,6 +195,41 @@
 	status = "disabled";
 };
 
+&ommanager {
+	memory-region = <&mm_ospi1>;
+	pinctrl-0 = <&ospi_port1_clk_pins_a
+		     &ospi_port1_io03_pins_a
+		     &ospi_port1_cs0_pins_a>;
+	pinctrl-1 = <&ospi_port1_clk_sleep_pins_a
+		     &ospi_port1_io03_sleep_pins_a
+		     &ospi_port1_cs0_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	spi@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		memory-region = <&mm_ospi1>;
+		status = "okay";
+
+		flash0: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-rx-bus-width = <4>;
+			spi-tx-bus-width = <4>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+};
+
+/* use LPTIMER with tick broadcast for suspend mode */
+&lptimer3 {
+	status = "okay";
+	timer {
+		status = "okay";
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd-evb.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd-evb.dts
index 8d7794642900..9ff22e1c8723 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd-evb.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -64,6 +64,26 @@
 	};
 };
 
+&ethernet0 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&ethernet1 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
 &fin_pll {
 	clock-frequency = <24000000>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index 3f898cf4874c..6f4658f57453 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -64,6 +64,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
+
+	eth0_tx_clk: eth0-tx-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_data: eth0-tx-data-pins {
+		samsung,pins = "gpf0-1", "gpf0-2", "gpf0-3", "gpf0-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_ctrl: eth0-tx-ctrl-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_phy_intr: eth0-phy-intr-pins {
+		samsung,pins = "gpf0-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth0_rx_clk: eth0-rx-clk-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_data: eth0-rx-data-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_ctrl: eth0-rx-ctrl-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_mdio: eth0-mdio-pins {
+		samsung,pins = "gpf1-6", "gpf1-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_peric {
@@ -381,6 +437,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
+
+	eth1_tx_clk: eth1-tx-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_data: eth1-tx-data-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_ctrl: eth1-tx-ctrl-pins {
+		samsung,pins = "gpf2-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_phy_intr: eth1-phy-intr-pins {
+		samsung,pins = "gpf2-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth1_rx_clk: eth1-rx-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_data: eth1-rx-data-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_ctrl: eth1-rx-ctrl-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_mdio: eth1-mdio-pins {
+		samsung,pins = "gpf3-6", "gpf3-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_pmu {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
index 9951eef9507c..a5ebb3f9b18f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -979,6 +979,36 @@
 			memory-region = <&mfc_left>;
 		};
 
+		ethernet1: ethernet@14300000 {
+			compatible = "tesla,fsd-ethqos";
+			reg = <0x0 0x14300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
+				 <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK>,
+				 <&clock_peric PERIC_DOUT_RGMII_CLK>;
+			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx",
+				      "master2_bus", "slave2_bus", "eqos_rxclk_mux",
+				      "eqos_phyrxclk", "dout_peric_rgmii_clk";
+			assigned-clocks = <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+					  <&clock_peric PERIC_EQOS_PHYRXCLK>;
+			assigned-clock-parents = <&clock_peric PERIC_EQOS_PHYRXCLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
+				    <&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
+				    <&eth1_rx_ctrl>, <&eth1_mdio>;
+			local-mac-address = [00 00 00 00 00 00];
+			iommus = <&smmu_peric 0x0 0x1>;
+			status = "disabled";
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
@@ -1007,6 +1037,26 @@
 			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
 			clock-names = "ref_clk";
 		};
+
+		ethernet0: ethernet@15300000 {
+			compatible = "tesla,fsd-ethqos";
+			reg = <0x0 0x15300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_PTP_REF_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_ACLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_HCLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_RGMII_CLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_RX_I>;
+			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth0_tx_clk>, <&eth0_tx_data>, <&eth0_tx_ctrl>,
+				    <&eth0_phy_intr>, <&eth0_rx_clk>, <&eth0_rx_data>,
+				    <&eth0_rx_ctrl>, <&eth0_mdio>;
+			local-mac-address = [00 00 00 00 00 00];
+			iommus = <&smmu_fsys0 0x0 0x1>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/Makefile linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/Makefile
index 03d4cecfc001..c6171de9fe88 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/Makefile
@@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -34,6 +35,16 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
 
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-mallow.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-mallow.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-yavia.dtb
 
 # Common overlays for SK-AM62* family of boards
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
@@ -109,6 +120,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo
 
 # Boards with J721s2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
@@ -120,6 +132,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 # Boards with J722s SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
@@ -128,6 +142,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 
 # Boards with J742S2 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
@@ -212,10 +227,18 @@ k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
 	k3-j721s2-evm-pcie1-ep.dtbo
+k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
+	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
+	k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
+k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
+	k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-pcie0-pcie1-ep.dtbo
 k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-quad-port-eth-exp1.dtbo
+k3-j784s4-evm-usb0-type-a-dtbs := k3-j784s4-evm.dtb \
+	k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
 dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
@@ -246,8 +269,12 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \
+	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
+	k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
+	k3-j742s2-evm-usb0-type-a.dtb \
 	k3-j784s4-evm-pcie0-pcie1-ep.dtb \
 	k3-j784s4-evm-quad-port-eth-exp1.dtb \
+	k3-j784s4-evm-usb0-type-a.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtb
 
 # Enable support for device-tree overlays
@@ -269,5 +296,6 @@ DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721e-evm-pcie0-ep += -@
 DTC_FLAGS_k3-j721e-sk += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
+DTC_FLAGS_k3-j722s-evm += -@
 DTC_FLAGS_k3-j784s4-evm += -@
 DTC_FLAGS_k3-j742s2-evm += -@
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index 8e9fc00a6b3c..aafdb90c0eb7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -69,6 +69,7 @@
 		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
+		bootph-all;
 	};
 };
 
@@ -77,12 +78,14 @@
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
 		>;
+		bootph-all;
 	};
 
 	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
 		>;
+		bootph-all;
 	};
 
 	pmic_irq_pins_default: pmic-irq-default-pins {
@@ -118,6 +121,7 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
 	};
 
 	exp2: gpio@23 {
@@ -229,6 +233,14 @@
 	DVDD-supply = <&buck2_reg>;
 };
 
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
 &gpmc0 {
 	ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 7d355aa73ea2..9e0b6eee9ac7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -552,8 +552,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
@@ -691,12 +689,14 @@
 	};
 
 	gpu: gpu@fd00000 {
-		compatible = "ti,am62-gpu", "img,img-axe";
+		compatible = "ti,am62-gpu", "img,img-axe-1-16m", "img,img-axe",
+			     "img,img-rogue";
 		reg = <0x00 0x0fd00000 0x00 0x20000>;
 		clocks = <&k3_clks 187 0>;
 		clock-names = "core";
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		power-domain-names = "a";
 	};
 
 	cpsw3g: ethernet@8000000 {
@@ -1079,6 +1079,96 @@
 		status = "disabled";
 	};
 
+	pruss: pruss@30040000 {
+		compatible = "ti,am625-pruss";
+		reg = <0x00 0x30040000 0x00 0x80000>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30040000 0x80000>;
+
+		pruss_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		pruss_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pruss_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 0>,  /* pruss_core_clk */
+						 <&k3_clks 81 14>; /* pruss_iclk */
+					assigned-clocks = <&pruss_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 81 14>;
+				};
+
+				pruss_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 3>,	/* pruss_iep_clk */
+						 <&pruss_coreclk_mux>;	/* pruss_coreclk_mux */
+					assigned-clocks = <&pruss_iepclk_mux>;
+					assigned-clock-parents = <&pruss_coreclk_mux>;
+				};
+			};
+		};
+
+		pruss_intc: interrupt-controller@20000 {
+			compatible = "ti,pruss-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0: pru@34000 {
+			compatible = "ti,am625-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am62x-pru0-fw";
+			interrupt-parent = <&pruss_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
+		};
+
+		pru1: pru@38000 {
+			compatible = "ti,am625-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am62x-pru1-fw";
+			interrupt-parent = <&pruss_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
+		};
+	};
+
 	gpmc0: memory-controller@3b000000 {
 		compatible = "ti,am64-gpmc";
 		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 55ed418c023b..10e6b5c08619 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -64,6 +64,18 @@
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -75,12 +87,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0x00c00000>;
-			no-map;
-		};
 	};
 
 	vcc_5v0_som: regulator-vcc-5v0-som {
@@ -240,10 +246,17 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
+
 	mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;
 		ti,mbox-tx = <1 0 0>;
 	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
 };
 
 &main_pktdma {
@@ -381,8 +394,17 @@
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
 	non-removable;
 	bootph-all;
 	status = "okay";
 };
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
new file mode 100644
index 000000000000..2e4cf65ee323
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * https://www.beagleboard.org/boards/pocketbeagle-2
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2025 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible = "beagle,am62-pocketbeagle2", "ti,am625";
+	model = "BeagleBoard.org PocketBeagle2";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart6;
+		serial3 = &main_uart0;
+		mmc1 = &sdhci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		i2c0 = &main_i2c0;
+		i2c2 = &main_i2c2;
+		i2c3 = &wkup_i2c0;
+	};
+
+	chosen {
+		stdout-path = &main_uart6;
+	};
+
+	memory@80000000 {
+		/* 512MB RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x20000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x8000000>;
+			linux,cma-default;
+		};
+
+		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9cb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9cc00000 0x00 0xe00000>;
+			no-map;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vsys_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_hs200_switch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3>;
+		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	adc_vref: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+		bootph-all;
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			bootph-all;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mmc1";
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			bootph-all;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			bootph-all;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			bootph-all;
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000c, PIN_OUTPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+			AM62X_IOPAD(0x0010, PIN_OUTPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+			AM62X_IOPAD(0x0014, PIN_OUTPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+			AM62X_IOPAD(0x0018, PIN_OUTPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+		>;
+		bootph-all;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_uart6_pins_default: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT, 7) /* (D17/C15) MMC1_SDCD.GPIO1_48 */
+		>;
+		bootph-all;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO1_49 */
+		>;
+		bootph-all;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+		>;
+		bootph-all;
+	};
+
+	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_OUTPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */
+		>;
+		bootph-all;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+		bootph-all;
+	};
+
+	epwm2_pins_default: epwm2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_OUTPUT, 8) /* (B17) I2C1_SCL.EHRPWM2_A */
+		>;
+	};
+};
+
+&epwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&epwm2_pins_default>;
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	bootph-pre-ram;
+	status = "reserved";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart6_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
+
+	ad7291: adc@20 {
+		/* Emulated with MSPM0L1105 */
+		compatible = "adi,ad7291";
+		reg = <0x20>;
+		vref-supply = <&adc_vref>;
+	};
+
+	eeprom: eeprom@50 {
+		/* Emulated with MSPM0L1105 */
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C6/A7) WKUP_UART0_CTSn */
+			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (A4/B4) WKUP_UART0_RTSn */
+			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (B4/B5) WKUP_UART0_RXD */
+			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (C5/C6) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0)	/* (B9) WKUP_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0)	/* (A9) WKUP_I2C0_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	disable-wp;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	bootph-all;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&usbss0 {
+	bootph-all;
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	/* This is a Type-C socket, but wired as USB 2.0 */
+	dr_mode = "peripheral";
+	bootph-all;
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	/*
+	 * Default set here is compatible with original PocketBeagle,
+	 * Expansion boards assumed this was pre-setup as host.
+	 */
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by Device Manager firmware */
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <100000>;
+	bootph-all;
+	status = "okay";
+
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vsys_5v0>;
+		buck2-supply = <&vsys_5v0>;
+		buck3-supply = <&vsys_5v0>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vdd_3v3>;
+		ldo4-supply = <&vdd_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		bootph-all;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/*
+				 * Regulator is left as is unused, vdd_sd
+				 * is controlled via GPIO with bypass config
+				 * as per the NVM configuration
+				 */
+				regulator-name = "VDD_SD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDA_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index fcc4cb2e9389..2b5f5e50b578 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -114,7 +114,7 @@
 
 	/* EEPROM */
 	eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index 7372d392ec8a..9a2483cf5d70 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -118,7 +118,7 @@
 
 	/* EEPROM */
 	eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 9b8a1f85aa15..6549b7efa656 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -106,6 +106,31 @@
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62.dtsi
index bfb55ca11323..59f6dff552ed 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -86,7 +86,9 @@
 			 /* Wakeup Domain Range */
 			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
-			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 
 		cbass_mcu: bus@4000000 {
 			bootph-all;
@@ -103,7 +105,9 @@
 			#size-cells = <2>;
 			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
-				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
index 3b4643b7d19c..000305c9e366 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <12000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
 };
 
 &main_gpio0 {
@@ -39,6 +66,10 @@
 		clocks = <&clk_ov5640_fixed>;
 		clock-names = "xclk";
 
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p5v>;
+
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2rx0_in_sensor>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
index 81a2763d43c6..8a7a9ece08af 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
 };
 
 &main_gpio0 {
@@ -39,6 +66,10 @@
 		clocks = <&clk_ov5640_fixed>;
 		clock-names = "xclk";
 
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_3p3v>;
+
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2rx0_in_sensor>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index a5469f2712f0..72b09f9c69d8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -832,9 +832,9 @@
 
 &sdhci0 {
 	bootph-all;
+	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
-	disable-wp;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a1daba7b1fad..63e097ddf988 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -575,8 +575,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
@@ -1123,6 +1121,18 @@
 		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
 	};
 
+	c7x_0: dsp@7e000000 {
+		compatible = "ti,am62a-c7xv-dsp";
+		reg = <0x00 0x7e000000 0x00 0x00100000>;
+		reg-names = "l2sram";
+		resets = <&k3_reset 208 1>;
+		firmware-name = "am62a-c71_0-fw";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <208>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		status = "disabled";
+	};
+
 	e5010: jpeg-encoder@fd20000 {
 		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
 		reg = <0x00 0xfd20000 0x00 0x100>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index 9ed9d703ff24..ee961ced7208 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -174,4 +174,29 @@
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	mcu_r5fss0: r5fss@79000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x79000000 0x00 0x79000000 0x8000>,
+			 <0x79020000 0x00 0x79020000 0x8000>;
+		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		mcu_r5fss0_core0: r5f@79000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x79000000 0x00008000>,
+			      <0x79020000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 9 1>;
+			firmware-name = "am62a-mcu-r5f0_0-fw";
+			ti,atcm-enable = <0>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <9>;
+			ti,sci-proc-ids = <0x03 0xff>;
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 147d56b87984..5dc5d2cb20cc 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -59,6 +59,42 @@
 			linux,cma-default;
 		};
 
+		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99800000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@99900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -70,12 +106,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	vcc_5v0_som: regulator-vcc-5v0-som {
@@ -170,6 +200,13 @@
 	};
 };
 
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
@@ -200,6 +237,33 @@
 	status = "okay";
 };
 
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -315,6 +379,26 @@
 	bootph-all;
 };
 
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+	status = "reserved";
+};
+
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -338,8 +422,17 @@
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
 	non-removable;
 	bootph-all;
 	status = "okay";
 };
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0  &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
index c7486fb2a5b4..3aa127157d24 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -12,12 +12,29 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 0>;
 
 		trips {
+			main0_alert: main0-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main0_crit: main0-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main1_thermal: main1-thermal {
@@ -26,25 +43,59 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 1>;
 
 		trips {
+			main1_alert: main1-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main1_crit: main1-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main1_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main2_thermal: main2-thermal {
-	       polling-delay-passive = <250>;	/* milliSeconds */
-	       polling-delay = <500>;		/* milliSeconds */
-	       thermal-sensors = <&wkup_vtm0 2>;
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 2>;
 
 		trips {
+			main2_alert: main2-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main2_crit: main2-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main2_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index b2c8f5351743..259ae6ebbfb5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -103,6 +103,31 @@
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62a-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 1c9d95696c83..b27759026014 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -52,6 +52,42 @@
 			linux,cma-default;
 		};
 
+		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99800000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@99900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -63,12 +99,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	opp-table {
@@ -313,6 +343,7 @@
 			AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
 			AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -383,6 +414,25 @@
 			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
 		>;
 	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01b8, PIN_OUTPUT, 3) /* (C16) SPI0_CS1.ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (A19) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x019c, PIN_OUTPUT, 6) /* (B18) MCASP0_AXR1.EHRPWM1_A */
+			AM62AX_IOPAD(0x01a0, PIN_OUTPUT, 6) /* (B20) MCASP0_AXR0.EHRPWM1_B */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -614,7 +664,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
+	bootph-all;
 };
 
 &sdhci1 {
@@ -652,6 +702,11 @@
 	status = "reserved";
 };
 
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+	status = "reserved";
+};
+
 &usbss0 {
 	status = "okay";
 	ti,vbus-divider;
@@ -741,3 +796,83 @@
 		};
 	};
 };
+
+&ecap0 {
+	/* P26 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P36/P33 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+	status = "reserved";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index 6c99221beb6b..b6e5eee99370 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -50,6 +50,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -66,6 +67,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -82,6 +84,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -98,6 +101,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 6e3beb5c2e01..fa55c43ca28d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -227,9 +227,18 @@
 		reg = <0x00 0x40900000 0x00 0x1200>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
 		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
 		       <&main_pktdma 0x7507 0>;
 		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x0 0x7d>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			status = "reserved";
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -564,8 +573,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 2>;
-		assigned-clock-parents = <&k3_clks 57 4>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi
new file mode 100644
index 000000000000..ee3feac6ea5d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Dahlia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	reg_1v8_sw: regulator-1v8-sw {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier +V1.8_SW";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		clocks = <&audio_refclk0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_1v8_sw>;
+		CPVDD-supply = <&reg_1v8_sw>;
+		DBVDD-supply = <&reg_1v8_sw>;
+		DCVDD-supply = <&reg_1v8_sw>;
+		MICVDD-supply = <&reg_1v8_sw>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi
new file mode 100644
index 000000000000..0679d76f31bd
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Development carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	carrier_eth_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+		micrel,led-mode = <0>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&carrier_eth_phy>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		clock-names = "mclk";
+		clocks = <&audio_refclk0>;
+		#sound-dai-cells = <0>;
+	};
+
+	carrier_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&main_uart1 {
+	rs485-rx-during-tx;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi
new file mode 100644
index 000000000000..317c8818f9ee
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&main_gpio0 50 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&som_adc 7>;
+		full-ohms = <204700>; /* 200K + 4.7K */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&som_adc 6>;
+		full-ohms = <39000>; /* 27K + 12K */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&som_adc 5>;
+		full-ohms = <54000>; /* 27K + 27K */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&som_adc 4>;
+		full-ohms = <39000>; /* 12K + 27K */
+		output-ohms = <27000>;
+	};
+};
+
+&main_pmx0 {
+	pinctrl_ivy_leds: ivy-leds-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x019c, PIN_INPUT, 7) /* (E24)  MCASP0_AXR1.GPIO1_9    */ /* SODIMM 36 */
+			AM62PX_IOPAD(0x01a0, PIN_INPUT, 7) /* (F23)  MCASP0_AXR0.GPIO1_10   */ /* SODIMM 34 */
+			AM62PX_IOPAD(0x01a4, PIN_INPUT, 7) /* (F24)  MCASP0_ACLKX.GPIO1_11  */ /* SODIMM 30 */
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25)  MCASP0_AFSX.GPIO1_12   */ /* SODIMM 32 */
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 7) /* (R24)  GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 7) /* (AA24) GPMC0_WAIT0.GPIO0_37   */ /* SODIMM 44 */
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 7) /* (T25)  GPMC0_WEn.GPIO0_34     */ /* SODIMM 46 */
+			AM62PX_IOPAD(0x002c, PIN_INPUT, 7) /* (M25)  OSPI0_CSn0.GPIO0_11    */ /* SODIMM 54 */
+		>;
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	carrier_eth_phy: ethernet-phy@2 {
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&carrier_eth_phy>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_qspi1_cs2_gpio>,
+		    <&pinctrl_qspi1_dqs_gpio>,
+		    <&pinctrl_qspi1_io0_gpio>,
+		    <&pinctrl_qspi1_io1_gpio>,
+		    <&pinctrl_qspi1_io2_gpio>,
+		    <&pinctrl_qspi1_io3_gpio>;
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"REL4",   /* SODIMM 66 */
+		"DIGI_1", /* SODIMM 56 */
+		"DIGI_2", /* SODIMM 58 */
+		"REL1",   /* SODIMM 60 */
+		"REL2",   /* SODIMM 62 */
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 90 */
+		"";
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"";
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_7>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <51 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_8>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <52 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_main_spi1>,
+		    <&pinctrl_main_spi1_cs0>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_4>;
+	cs-gpios = <0>,
+		   <&mcu_gpio0 1 GPIO_ACTIVE_LOW>,
+		   <&mcu_gpio0 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>;
+	gpio-line-names =
+		"",
+		"",
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
new file mode 100644
index 000000000000..37c0b9da82da
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_main_spi1>,
+		    <&pinctrl_main_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi
new file mode 100644
index 000000000000..8e7019f00e65
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM non-WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+/* SDIO on MSP 30, 31, 32, 33, 34, 35 */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	status = "disabled";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi
new file mode 100644
index 000000000000..04d3124b5e0f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+/* On-module Bluetooth */
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <3000000>;
+	};
+};
+
+/* On-module Wi-Fi */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	keep-power-in-suspend;
+	non-removable;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi
new file mode 100644
index 000000000000..b7423a774dc5
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Yavia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>,
+			    <&pinctrl_qspi1_io2_gpio>,
+			    <&pinctrl_qspi1_io3_gpio>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_qspi1_cs2_gpio>,
+		    <&pinctrl_qspi1_dqs_gpio>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
new file mode 100644
index 000000000000..226398c37fa9
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
@@ -0,0 +1,1404 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		can0 = &main_mcan0;
+		can1 = &mcu_mcan0;
+		eeprom0 = &som_eeprom;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c0;
+		i2c2 = &main_i2c1;
+		i2c3 = &mcu_i2c0;
+		i2c4 = &main_i2c3;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &som_rtc_i2c;
+		rtc1 = &wkup_rtc0;
+		serial0 = &main_uart1;
+		serial1 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &mcu_uart0;
+		serial4 = &main_uart6;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		label = "USB_1";
+		self-powered;
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb0_ep>;
+			};
+		};
+	};
+
+	verdin_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&main_gpio0 1 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
+	/* Verdin SD_1 Power Supply */
+	reg_sd1_vmmc: regulator-sdhci1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpios = <&main_gpio0 47 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reg_sd1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd_vsel>;
+		/* PMIC_VSEL_SD */
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "LDO1-VSEL-SD (PMIC)";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en>;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpios = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	/* Module Power Supply */
+	reg_vsodimm: regulator-vsodimm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V_SODIMM";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	/* Verdin PWM_3_DSI */
+	pinctrl_epwm0_b: main-epwm0b-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (E20) SPI0_CS1.EHRPWM0_B */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin PWM_2 */
+	pinctrl_epwm2_a: main-epwm2a-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0124, PIN_OUTPUT, 4) /* (J25) MMC2_SDCD.EHRPWM2_A */ /* SODIMM 16 */
+		>;
+	};
+
+	/* Verdin PWM_1 */
+	pinctrl_epwm2_b: main-epwm2b-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0128, PIN_OUTPUT, 4) /* (K25) MMC2_SDWP.EHRPWM2_B */ /* SODIMM 15 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0000, PIN_INPUT, 7) /* (P23) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */
+		>;
+	};
+
+	/* Verdin CTRL_WAKE1_MICO# */
+	pinctrl_ctrl_wake1_mico: main-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0004, PIN_INPUT, 7) /* (N23) OSPI0_LBCLKO.GPIO0_1 */ /* SODIMM 252 */
+		>;
+	};
+
+	/* Verdin QSPI_1_DQS as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_dqs_gpio: main-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0008, PIN_INPUT, 7) /* (P22) OSPI0_DQS.GPIO0_2 */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x000c, PIN_INPUT, 7) /* (L25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0010, PIN_INPUT, 7) /* (N24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0014, PIN_INPUT, 7) /* (N25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0018, PIN_INPUT, 7) /* (M24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x002c, PIN_INPUT, 7) /* (M25) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0030, PIN_INPUT, 7) /* (L24) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */
+		>;
+	};
+
+	/* Verdin MSP_37 as GPIO */
+	pinctrl_msp37_gpio: main-gpio0-13-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0034, PIN_INPUT, 7) /* (L22) OSPI0_CSn2.GPIO0_13 */ /* SODIMM 174 - WiFi_W_WKUP_HOST# */
+		>;
+	};
+
+	/* Verdin PCIE_1_RESET# */
+	pinctrl_pcie_1_reset: main-gpio0-14-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0038, PIN_INPUT, 7) /* (L23) OSPI0_CSn3.GPIO0_14 */ /* SODIMM 244 */
+		>;
+	};
+
+	pinctrl_sd_vsel: main-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0054, PIN_INPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */ /* PMIC_SD_VSEL */
+		>;
+	};
+
+	pinctrl_tpm_extint: main-gpio0-25-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0064, PIN_INPUT, 7) /* (AA25) GPMC0_AD10.GPIO0_25 */ /* TPM_EXTINT# */
+		>;
+	};
+
+	pinctrl_wifi_wkup_bt: main-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0074, PIN_INPUT, 7) /* (AB24) GPMC0_AD14.GPIO0_29 */ /* WiFi_WKUP_BT# */
+		>;
+	};
+
+	pinctrl_wifi_wkup_wlan: main-gpio0-30-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0078, PIN_INPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */ /* WiFi_WKUP_WLAN# */
+		>;
+	};
+
+	/* Verdin USB_1_ID */
+	pinctrl_usb0_id: main-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 161 */
+		>;
+	};
+
+	/* Verdin USB_1_OC# */
+	pinctrl_usb1_oc: main-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0084, PIN_INPUT, 7) /* (R25) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 157 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_IN as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_in_gpio: main-gpio0-33-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 7) /* (R24) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 7) /* (T25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
+		>;
+	};
+
+	/* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 7) /* (U24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */
+		>;
+	};
+
+	pinctrl_eth_int: main-gpio0-36-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0094, PIN_INPUT, 7) /* (T24) GPMC0_BE1n.GPIO0_36 */ /* ETH_INT# */
+		>;
+	};
+
+	/* Verdin I2S_2_SYNC as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_sync_gpio: main-gpio0-37-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 7) /* (AA24) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */
+		>;
+	};
+
+	/* Verdin DSI_1_INT# */
+	pinctrl_dsi1_int: main-gpio0-38-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x009c, PIN_INPUT, 7) /* (AD24) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 17 */
+		>;
+	};
+
+	/* Verdin DSI_1_BLK_EN# */
+	pinctrl_dsi1_bkl_en: main-gpio0-39-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00a0, PIN_INPUT, 7) /* (P24) GPMC0_WPn.GPIO0_39 */ /* SODIMM 21 */
+		>;
+	};
+
+	/* Verdin USB_2_OC# */
+	pinctrl_usb2_oc: main-gpio0-41-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00a8, PIN_INPUT, 7) /* (T23) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 187 */
+		>;
+	};
+
+	/* Verdin ETH_2_RGMII_INT# */
+	pinctrl_eth2_rgmii_int: main-gpio0-42-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00ac, PIN_INPUT, 7) /* (U23) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 189 */
+		>;
+	};
+
+	/* Verdin SD_1_PWR_EN */
+	pinctrl_sd1_pwr_en: main-gpio0-47-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c0, PIN_INPUT, 7) /* (AA23) VOUT0_DATA2.GPIO0_47 */ /* SODIMM 76 */
+		>;
+	};
+
+	/* Verdin GPIO_5 */
+	pinctrl_gpio_5: main-gpio0-49-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c8, PIN_INPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */ /* SODIMM 216 */
+		>;
+	};
+
+	/* Verdin GPIO_6 */
+	pinctrl_gpio_6: main-gpio0-50-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00cc, PIN_INPUT, 7) /* (AD23) VOUT0_DATA5.GPIO0_50 */ /* SODIMM 218 */
+		>;
+	};
+
+	/* Verdin GPIO_7 */
+	pinctrl_gpio_7: main-gpio0-51-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d0, PIN_INPUT, 7) /* (AC23) VOUT0_DATA6.GPIO0_51 */ /* SODIMM 220 */
+		>;
+	};
+
+	/* Verdin GPIO_8 */
+	pinctrl_gpio_8: main-gpio0-52-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d4, PIN_INPUT, 7) /* (AE23) VOUT0_DATA7.GPIO0_52 */ /* SODIMM 222 */
+		>;
+	};
+
+	/* Verdin MSP_36 as GPIO */
+	pinctrl_msp36_gpio: main-gpio0-57-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00e8, PIN_INPUT, 7) /* (AD21) VOUT0_DATA12.GPIO0_57 */ /* SODIMM 172 - WiFi_BT_WKUP_HOST#  */
+		>;
+	};
+
+	pinctrl_wifi_sd_int: main-gpio0-59-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f0, PIN_INPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 */ /* WIFI_SD_INT */
+		>;
+	};
+
+	pinctrl_wifi_spi_cs: main-gpio0-60-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f4, PIN_INPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 */ /* WIFI_SPI_CS# */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI as GPIO */
+	pinctrl_pwm3_dsi_gpio: main-gpio1-16-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin SD_1_CD# */
+	pinctrl_sd1_cd: main-gpio1-48-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0240, PIN_INPUT, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
+		>;
+	};
+
+	/* Verdin MSP_29 as GPIO */
+	pinctl_msp29_gpio: main-gpio1-49-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */ /* SODIMM 154 */
+		>;
+	};
+
+	/* Verdin USB_1_EN */
+	pinctrl_usb0_en: main-gpio1-50-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0254, PIN_INPUT, 7) /* (G22) USB0_DRVVBUS.GPIO1_50 */ /* SODIMM 155 */
+		>;
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_main_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */ /* SODIMM 14 */
+			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */ /* SODIMM 12 */
+		>;
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_main_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ /* SODIMM 55 */
+			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */ /* SODIMM 53 */
+		>;
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_main_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+			AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+		>;
+	};
+
+	/* Verdin CAN_1 */
+	pinctrl_main_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01dc, PIN_INPUT, 0)  /* (F20) MCAN0_RX */ /* SODIMM 22 */
+			AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* Verdin MSP_3/MSP_8 as CAN */
+	pinctrl_main_mcan1: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b4, PIN_INPUT, 5)  /* (U25) GPMC0_CSn3.MCAN1_RX */ /* SODIMM 92  */
+			AM62PX_IOPAD(0x00b0, PIN_OUTPUT, 5) /* (T22) GPMC0_CSn2.MCAN1_TX */ /* SODIMM 104 */
+		>;
+	};
+
+	/* Verdin SD_1 */
+	pinctrl_sdhci1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x023c, PIN_INPUT,  0) /* (H20) MMC1_CMD  */ /* SODIMM 74 */
+			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK  */ /* SODIMM 78 */
+			AM62PX_IOPAD(0x0230, PIN_INPUT,  0) /* (H21) MMC1_DAT0 */ /* SODIMM 80 */
+			AM62PX_IOPAD(0x022c, PIN_INPUT,  0) /* (H23) MMC1_DAT1 */ /* SODIMM 82 */
+			AM62PX_IOPAD(0x0228, PIN_INPUT,  0) /* (H22) MMC1_DAT2 */ /* SODIMM 70 */
+			AM62PX_IOPAD(0x0224, PIN_INPUT,  0) /* (H25) MMC1_DAT3 */ /* SODIMM 72 */
+		>;
+	};
+
+	/* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */
+	pinctrl_sdhci2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0120, PIN_INPUT,  0) /* (K24) MMC2_CMD  */ /* SODIMM 160, WiFi_SDIO_CMD   */
+			AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK  */ /* SODIMM 156, WiFi_SDIO_CLK   */
+			AM62PX_IOPAD(0x011C, PIN_INPUT,  0) /* () MMC2_CLKLB   */
+			AM62PX_IOPAD(0x0114, PIN_INPUT,  0) /* (K23) MMC2_DAT0 */ /* SODIMM 162, WiFi_SDIO_DATA0 */
+			AM62PX_IOPAD(0x0110, PIN_INPUT,  0) /* (K22) MMC2_DAT1 */ /* SODIMM 164, WiFi_SDIO_DATA1 */
+			AM62PX_IOPAD(0x010c, PIN_INPUT,  0) /* (L20) MMC2_DAT2 */ /* SODIMM 166, WiFi_SDIO_DATA2 */
+			AM62PX_IOPAD(0x0108, PIN_INPUT,  0) /* (L21) MMC2_DAT3 */ /* SODIMM 168, WiFi_SDIO_DATA3 */
+		>;
+	};
+
+	/* Verdin QSPI_1 */
+	pinctrl_ospi0: main-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK  */ /* SODIMM 52 */
+			AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */ /* SODIMM 54 */
+			AM62PX_IOPAD(0x0030, PIN_OUTPUT, 0) /* (L24) OSPI0_CSn1 */ /* SODIMM 64 */
+			AM62PX_IOPAD(0x000c, PIN_INPUT,  0) /* (L25) OSPI0_D0   */ /* SODIMM 56 */
+			AM62PX_IOPAD(0x0010, PIN_INPUT,  0) /* (N24) OSPI0_D1   */ /* SODIMM 58 */
+			AM62PX_IOPAD(0x0014, PIN_INPUT,  0) /* (N25) OSPI0_D2   */ /* SODIMM 60 */
+			AM62PX_IOPAD(0x0018, PIN_INPUT,  0) /* (M24) OSPI0_D3   */ /* SODIMM 62 */
+			AM62PX_IOPAD(0x0008, PIN_INPUT,  0) /* (P22) OSPI0_DQS  */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin ETH_1 RGMII (On-module PHY) */
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0    */ /* RGMII_RXD0   */
+			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1    */ /* RGMII_RXD1   */
+			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2    */ /* RGMII_RXD2   */
+			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3    */ /* RGMII_RXD3   */
+			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC    */ /* RGMII_RXC    */
+			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */ /* RGMII_RX_CTL */
+			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0    */ /* RGMII_TXD0   */
+			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1    */ /* RGMII_TXD1   */
+			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2    */ /* RGMII_TXD2   */
+			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3    */ /* RGMII_TXD3   */
+			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC    */ /* RGMII_TXC    */
+			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */ /* RGMII_TX_CTL */
+		>;
+	};
+
+	/* Verdin ETH_2 RGMII */
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0    */ /* SODIMM 201 */
+			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1    */ /* SODIMM 203 */
+			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2    */ /* SODIMM 205 */
+			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3    */ /* SODIMM 207 */
+			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC    */ /* SODIMM 197 */
+			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */ /* SODIMM 199 */
+			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0    */ /* SODIMM 221 */
+			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1    */ /* SODIMM 219 */
+			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2    */ /* SODIMM 217 */
+			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3    */ /* SODIMM 215 */
+			AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC    */ /* SODIMM 213 */
+			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */ /* SODIMM 211 */
+		>;
+	};
+
+	/* TPM SPI, Optional Module Specific SPI */
+	pinctrl_main_spi0: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_INPUT,  0) /* (B21) SPI0_CLK */ /* TPM_SPI_CLK  - SODIMM 148 */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0  */ /* TPM_SPI_MOSI - SODIMM 150 */
+			AM62PX_IOPAD(0x01c4, PIN_INPUT,  0) /* (C21) SPI0_D1  */ /* TPM_SPI_MISO - SODIMM 152 */
+			AM62PX_IOPAD(0x01b4, PIN_INPUT,  0) /* (D20) SPI0_CS0 */ /* TPM_SPI_CS */
+		>;
+	};
+
+	/* Verdin SPI_1 */
+	pinctrl_main_spi1: main-spi1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0020, PIN_INPUT,  1) /* (N22) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
+			AM62PX_IOPAD(0x0024, PIN_OUTPUT, 1) /* (P21) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
+			AM62PX_IOPAD(0x0028, PIN_INPUT,  1) /* (N20) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
+		>;
+	};
+
+	/* Verdin SPI_1_CS */
+	pinctrl_main_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x001c, PIN_OUTPUT, 1) /* (N21) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
+	/* Verdin I2S_1 MCLK */
+	pinctrl_i2s1_mclk: main-system-audio-ext-reflock0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c4, PIN_OUTPUT, 5) /* (Y23) VOUT0_DATA3.AUDIO_EXT_REFCLK0 */ /* SODIMM 38 */
+		>;
+	};
+
+	pinctrl_eth_clock: main-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (C25) EXT_REFCLK1.CLKOUT0 */ /* ETH_25MHz_CLK */
+		>;
+	};
+
+	pinctrl_pmic_extint: main-system-extint-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f4, PIN_INPUT, 0) /* (C23) EXTINTn */ /* PMIC_EXTINT# */
+		>;
+	};
+
+	/* Verdin UART_3, used as the Linux console */
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT,  0) /* (A22) UART0_RXD */ /* SODIMM 147 */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ /* SODIMM 149 */
+		>;
+	};
+
+	/* Verdin UART_1 */
+	pinctrl_uart1: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01ac, PIN_INPUT,  2) /* (G23) MCASP0_AFSR.UART1_RXD  */ /* SODIMM 129 */
+			AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */
+			AM62PX_IOPAD(0x0194, PIN_INPUT,  2) /* (D25) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */
+			AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */
+		>;
+	};
+
+	/* Verdin MSP 41, 42, 44 and 45 as UART */
+	pinctrl_uart2: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b8, PIN_INPUT,  4) /* (AE24) VOUT0_DATA0.UART2_RXD */ /* SODIMM 192 */
+			AM62PX_IOPAD(0x00bc, PIN_OUTPUT, 4) /* (W23) VOUT0_DATA1.UART2_TXD  */ /* SODIMM 190 */
+			AM62PX_IOPAD(0x0104, PIN_INPUT,  4) /* (Y21) VOUT0_PCLK.UART2_CTSn  */ /* SODIMM 184 */
+			AM62PX_IOPAD(0x0100, PIN_OUTPUT, 4) /* (W20) VOUT0_VSYNC.UART2_RTSn */ /* SODIMM 186 */
+		>;
+	};
+
+	/* Bluetooth on WB SKUs */
+	pinctrl_uart6: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d8, PIN_INPUT,  4) /* (AE22) VOUT0_DATA8.UART6_RXD   */ /* WiFi_UART_RXD */
+			AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (AC22) VOUT0_DATA9.UART6_TXD   */ /* WiFi_UART_TXD */
+			AM62PX_IOPAD(0x00e4, PIN_INPUT,  4) /* (AE21) VOUT0_DATA11.UART6_CTSn */ /* WiFi_UART_CTS */
+			AM62PX_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (W22)  VOUT0_DATA10.UART6_RTSn */ /* WiFi_UART_RTS */
+		>;
+	};
+
+	/* Verdin USB_2_EN */
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */ /* SODIMM 185 */
+		>;
+	};
+
+	/* Verdin I2S_1 */
+	pinctrl_mcasp0: mcasp0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a4, PIN_INPUT, 0) /* (F24) MCASP0_ACLKX */ /* SODIMM 30 */
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 0) /* (F25) MCASP0_AFSX  */ /* SODIMM 32 */
+			AM62PX_IOPAD(0x01a0, PIN_INPUT, 0) /* (F23) MCASP0_AXR0  */ /* SODIMM 34 */
+			AM62PX_IOPAD(0x019c, PIN_INPUT, 0) /* (E24) MCASP0_AXR1  */ /* SODIMM 36 */
+		>;
+	};
+
+	/* Verdin I2S_2 */
+	pinctrl_mcasp1: mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24)  GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX     */ /* SODIMM 44 */
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25)  GPMC0_WEn.MCASP1_AXR0       */ /* SODIMM 46 */
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 2) /* (R24)  GPMC0_OEn_REn.MCASP1_AXR1   */ /* SODIMM 48 */
+		>;
+	};
+
+	/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+	pinctrl_mdio: mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC  */ /* SODIMM 193 */
+			AM62PX_IOPAD(0x015c, PIN_INPUT,  0) /* (F16) MDIO0_MDIO */ /* SODIMM 191 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	/* Verdin GPIO_1 */
+	pinctrl_gpio_1: mcu-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (E10) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */
+		>;
+	};
+
+	/* Verdin GPIO_2 */
+	pinctrl_gpio_2: mcu-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (C10) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */
+		>;
+	};
+
+	/* Verdin GPIO_3 */
+	pinctrl_gpio_3: mcu-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (B11) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */
+		>;
+	};
+
+	/* Verdin GPIO_4 */
+	pinctrl_gpio_4: mcu-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (D10) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */
+		>;
+	};
+
+	/* Verdin I2C_3_HDMI */
+	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62PX_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
+		>;
+	};
+
+	/* Verdin CAN_2 */
+	pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0038, PIN_INPUT,  0) /* (D6) MCU_MCAN0_RX */ /* SODIMM 22 */
+			AM62PX_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (E8) MCU_MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* Verdin MSP_13/MSP_18 as CAN */
+	pinctrl_mcu_mcan1: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0040, PIN_INPUT,  0) /* (E7) MCU_MCAN1_RX */ /* SODIMM 116 */
+			AM62PX_MCU_IOPAD(0x003c, PIN_OUTPUT, 0) /* (F8) MCU_MCAN1_TX */ /* SODIMM 128 */
+		>;
+	};
+
+	/* Verdin UART_4 */
+	pinctrl_mcu_uart0: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0014, PIN_INPUT,  0) /* (B6) MCU_UART0_RXD */ /* SODIMM 151 */
+			AM62PX_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (C8) MCU_UART0_TXD */ /* SODIMM 153 */
+		>;
+	};
+
+	/* On-module I2C - PMIC_I2C */
+	pinctrl_wkup_i2c0: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x004c, PIN_INPUT, 0) /* (A13) WKUP_I2C0_SCL */ /* PMIC_I2C_SCL */
+			AM62PX_MCU_IOPAD(0x0050, PIN_INPUT, 0) /* (C11) WKUP_I2C0_SDA */ /* PMIC_I2C_SDA */
+		>;
+	};
+
+	/* Verdin CSI_1_MCLK */
+	pinctrl_wkup_clkout0: wkup-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */ /* SODIMM 91 */
+		>;
+	};
+
+	/* Verdin UART_2 */
+	pinctrl_wkup_uart0: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x002c, PIN_INPUT,  0) /* (C7) WKUP_UART0_CTSn */ /* SODIMM 143 */
+			AM62PX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ /* SODIMM 141 */
+			AM62PX_MCU_IOPAD(0x0024, PIN_INPUT,  0) /* (D8) WKUP_UART0_RXD  */ /* SODIMM 137 */
+			AM62PX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD  */ /* SODIMM 139 */
+		>;
+	};
+};
+
+/* Verdin I2S_1_MCLK */
+&audio_refclk0 {
+	assigned-clock-rates = <25000000>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+	status = "disabled";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>, <&pinctrl_eth_clock>;
+	assigned-clocks = <&k3_clks 157 36>;
+	assigned-clock-parents = <&k3_clks 157 38>;
+	assigned-clock-rates = <25000000>;
+	status = "disabled";
+
+	som_eth_phy: ethernet-phy@0 {
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	phy-handle = <&som_eth_phy>;
+	phy-mode = "rgmii-rxid";
+	status = "disabled";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	status = "disabled";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm0_b>;
+	status = "disabled";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm2_a>, <&pinctrl_epwm2_b>;
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"SODIMM_52",
+		"SODIMM_252",
+		"SODIMM_66",
+		"SODIMM_56",
+		"SODIMM_58",
+		"SODIMM_60",
+		"SODIMM_62",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"SODIMM_54",
+		"SODIMM_64",
+		"SODIMM_174",
+		"SODIMM_244",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"PMIC_SD_VSEL",
+		"",
+		"",
+		"",
+		"TPM_EXTINT#",
+		"",
+		"",
+		"",
+		"WiFi_WKUP_BT#",
+		"WiFi_WKUP_WLAN#", /* 30 */
+		"SODIMM_161",
+		"SODIMM_157",
+		"",
+		"",
+		"",
+		"ETH_INT#",
+		"",
+		"SODIMM_17",
+		"SODIMM_21",
+		"", /* 40 */
+		"SODIMM_187",
+		"SODIMM_189",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_76",
+		"",
+		"SODIMM_216",
+		"SODIMM_218", /* 50 */
+		"SODIMM_220",
+		"SODIMM_222",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_172",
+		"",
+		"WIFI_SD_INT",
+		"WIFI_SPI_CS#", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 90 */
+		"";
+
+	verdin_pcie_1_reset_hog: pcie-1-reset-hog {
+		gpio-hog;
+		/* Verdin PCIE_1_RESET# (SODIMM 244) */
+		gpios = <14 GPIO_ACTIVE_LOW>;
+		line-name = "PCIE_1_RESET#";
+		output-low;
+		status = "disabled";
+	};
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_84",
+		"SODIMM_154",
+		"SODIMM_155", /* 50 */
+		"";
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c0>;
+	status = "disabled";
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c1>;
+	status = "disabled";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c3>;
+	status = "disabled";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mcan0>;
+	status = "disabled";
+};
+
+/* TPM SPI, optional SPI on module specific pins */
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi0>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_extint>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi1>, <&pinctrl_main_spi1_cs0>;
+	ti,pindir-d0-out-d1-in;
+	status = "disabled";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "disabled";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp0>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <0>;
+	tx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2S_2 */
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <0>;
+	tx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+&mcu_gpio0 {
+	gpio-line-names =
+		"",
+		"SODIMM_206",
+		"SODIMM_208",
+		"SODIMM_210",
+		"SODIMM_212",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c0>;
+	status = "disabled";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_uart0>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ospi0>;
+	status = "disabled";
+};
+
+/* On-module eMMC */
+&sdhci0 {
+	no-mmc-hs400;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1>, <&pinctrl_sd1_cd>;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	ti,fails-without-test-cd;
+	status = "disabled";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb0 {
+	adp-disable;
+	usb-role-switch;
+	status = "disabled";
+
+	port {
+		usb0_ep: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "disabled";
+};
+
+/* On-module I2C - PMIC_I2C */
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "SODIMM_256";
+	};
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_extint>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+
+		buck1-supply = <&reg_vsodimm>;
+		buck2-supply = <&reg_vsodimm>;
+		buck3-supply = <&reg_vsodimm>;
+		ldo1-supply = <&reg_3v3>;
+		ldo2-supply = <&reg_1v8>;
+		ldo3-supply = <&reg_3v3>;
+		ldo4-supply = <&reg_3v3>;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			reg_3v3: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK1)";
+			};
+
+			reg_1v8: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */
+			};
+
+			buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK3)";
+			};
+
+			reg_sd_3v3_1v8: ldo1 {
+				regulator-allow-bypass;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO1)";
+			};
+
+			ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+V_PMIC_LDO2 (PMIC LDO4)"; // +VDDR_CORE
+			};
+
+			ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "+V2.5_ETH (PMIC LDO4)";
+			};
+		};
+	};
+
+	som_rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	som_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#io-channel-cells = <1>;
+
+		/* Verdin (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	som_eeprom: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_uart0>;
+	uart-has-rtscts;
+	status = "disabled";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index d29f524600af..83c37de7d338 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -49,19 +49,37 @@
 		#size-cells = <2>;
 		ranges;
 
-		secure_tfa_ddr: tfa@9e780000 {
-			reg = <0x00 0x9e780000 0x00 0x80000>;
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
 			no-map;
 		};
 
-		secure_ddr: optee@9e800000 {
-			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+		wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
 			no-map;
 		};
 	};
@@ -115,6 +133,28 @@
 		bootph-all;
 	};
 
+	vcc_3v3_main: regulator-4 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_main";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-5 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -356,6 +396,32 @@
 			AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */
 		>;
 	};
+
+	main_ecap1_pins_default: main-ecap1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x019c, PIN_OUTPUT, 2) /* (E24) MCASP0_AXR1.ECAP1_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (F24) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm0_pins_default: main-epwm0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (D20) SPI0_CS0.EHRPWM0_A */
+			AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (E20) SPI0_CS1.EHRPWM0_B */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (B21) SPI0_CLK.EHRPWM1_A */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 2) /* (B20) SPI0_D0.EHRPWM1_B */
+		>;
+	};
 };
 
 &main_i2c0 {
@@ -454,8 +520,8 @@
 
 &sdhci0 {
 	status = "okay";
+	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 	bootph-all;
 };
 
@@ -640,6 +706,26 @@
 	};
 };
 
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -683,3 +769,31 @@
 &mcu_gpio_intr {
 	status = "reserved";
 };
+
+&ecap1 {
+	/* P36 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap1_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm0 {
+	/* P24/P26 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm0_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P23/P19 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000000..1790e572eaa0
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Dahlia Board";
+	compatible = "toradex,verdin-am62p-nonwifi-dahlia",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000000..5794f650f751
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Verdin Development Board";
+	compatible = "toradex,verdin-am62p-nonwifi-dev",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..a777513f26ec
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Ivy Board";
+	compatible = "toradex,verdin-am62p-nonwifi-ivy",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..52823874eadc
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Mallow Board";
+	compatible = "toradex,verdin-am62p-nonwifi-mallow",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000000..c27bda794b51
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Yavia Board";
+	compatible = "toradex,verdin-am62p-nonwifi-yavia",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000000..12b57985f38e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Dahlia Board";
+	compatible = "toradex,verdin-am62p-wifi-dahlia",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts
new file mode 100644
index 000000000000..bbc2770d5f5d
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Verdin Development Board";
+	compatible = "toradex,verdin-am62p-wifi-dev",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..27467281bc3a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Ivy Board";
+	compatible = "toradex,verdin-am62p-wifi-ivy",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..e35851451cd4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Mallow Board";
+	compatible = "toradex,verdin-am62p-wifi-mallow",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts
new file mode 100644
index 000000000000..25e0842bc905
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Yavia Board";
+	compatible = "toradex,verdin-am62p-wifi-yavia",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
index f0b2fd4165a7..1fd0aaff3193 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -33,7 +33,7 @@
 &thermal_zones {
 	main0_thermal: main0-thermal {
 		trips {
-			main0_thermal_trip0: main0-thermal-trip {
+			main0_fan: main0-fan {
 				temperature = <65000>;  /* millicelsius */
 				hysteresis = <2000>;    /* millicelsius */
 				type = "active";
@@ -42,7 +42,17 @@
 
 		cooling-maps {
 			map0 {
-				trip = <&main0_thermal_trip0>;
+				trip = <&main0_alert>;
+				cooling-device =
+					<&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+
+			map1 {
+				trip = <&main0_fan>;
 				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index d52cb2a5a589..ee8337bfbbfd 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -70,6 +70,18 @@
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -82,11 +94,6 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0xc00000>;
-			no-map;
-		};
 	};
 
 	leds {
@@ -303,6 +310,25 @@
 			AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
 		>;
 	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b8, PIN_OUTPUT, 3) /* (C13) SPI0_CS1.ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (B20) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x019c, PIN_OUTPUT, 6) /* (B18) MCASP0_AXR1.EHRPWM1_A */
+			AM62X_IOPAD(0x01a0, PIN_OUTPUT, 6) /* (E18) MCASP0_AXR0.EHRPWM1_B */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -434,9 +460,9 @@
 &sdhci0 {
 	bootph-all;
 	status = "okay";
+	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
 };
 
 &sdhci1 {
@@ -476,10 +502,17 @@
 };
 
 &mailbox0_cluster0 {
+	status = "okay";
+
 	mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;
 		ti,mbox-tx = <1 0 0>;
 	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
 };
 
 &mcu_m4fss {
@@ -489,6 +522,16 @@
 	status = "okay";
 };
 
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
 &usbss0 {
 	bootph-all;
 	status = "okay";
@@ -560,3 +603,24 @@
 &mcu_gpio_intr {
 	status = "reserved";
 };
+
+&ecap0 {
+	/* P26 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P36/P33 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..149c59c07182 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +66,10 @@
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
+
+				VANA-supply = <&reg_2p8v>;
+				VDIG-supply = <&reg_1p8v>;
+				VDDL-supply = <&reg_1p2v>;
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
index ccc7f5e43184..fc77fc77fe0b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <12000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -40,6 +67,11 @@
 
 				clocks = <&clk_ov5640_fixed>;
 				clock-names = "xclk";
+
+				AVDD-supply = <&reg_2p8v>;
+				DOVDD-supply = <&reg_1p8v>;
+				DVDD-supply = <&reg_1p5v>;
+
 				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
 
 				port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index 4eaf9d757dd0..fe3bc29632fa 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -40,6 +67,11 @@
 
 				clocks = <&clk_ov5640_fixed>;
 				clock-names = "xclk";
+
+				AVDD-supply = <&reg_2p8v>;
+				DOVDD-supply = <&reg_1p8v>;
+				DVDD-supply = <&reg_3p3v>;
+
 				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
 
 				port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 324eb44c258d..c7e5da37486a 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -51,6 +51,11 @@
 			reg = <0x00000014 0x4>;
 		};
 
+		pcie0_ctrl: pcie-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x4>;
@@ -1031,12 +1036,12 @@
 		reg = <0x00 0x0f102000 0x00 0x1000>,
 		      <0x00 0x0f100000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x00001000>;
+		      <0x06 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <2>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
@@ -1049,8 +1054,8 @@
 		vendor-id = <0x104c>;
 		device-id = <0xb010>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
-		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
-			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x06 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x06 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
 		status = "disabled";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
index 6b029539e0db..432751774853 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
@@ -46,6 +46,6 @@
 		max-functions = /bits/ 8 <1>;
 		phys = <&serdes0_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 8416132090b4..025c16f9b2b9 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -597,7 +597,6 @@
 	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 	bootph-all;
 };
 
@@ -796,6 +795,26 @@
 	status = "okay";
 };
 
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
 &serdes_ln_ctrl {
 	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 33e421ec18ab..1deaa0be0085 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -710,6 +710,26 @@
 	status = "okay";
 };
 
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 94a812a1355b..b085e7361116 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,8 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
 		ti,itap-del-sel-ddr52 = <0x0>;
 		dma-coherent;
 		status = "disabled";
@@ -479,7 +481,7 @@
 	};
 
 	scm_conf: scm-conf@100000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,am654-system-controller", "syscon", "simple-mfd";
 		reg = <0 0x00100000 0 0x1c000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
index 364c57b3b3a0..7a3953d64fd8 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -15,8 +15,20 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 &{/} {
+	vcc_5v0: lcd-regulator {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&evm_12v0>;
+	};
+
 	display0 {
 		compatible = "rocktech,rk101ii01d-ct";
+		power-supply = <&vcc_5v0>;
 		backlight = <&lcd_bl>;
 		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
 		port {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index aa7139cc8a92..c30425960398 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -456,7 +456,6 @@
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
 
 /*
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index ae842b85b70d..12af6cb7f65c 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -50,5 +50,4 @@
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 9be6bba28c26..bf9b23df1da2 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -309,6 +309,7 @@
 };
 
 &main_gpio1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
new file mode 100644
index 000000000000..41c8f8526e15
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ *
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+#include "k3-am68-phycore-som.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "phytec,am68-phyboard-izar",
+		     "phytec,am68-phycore-som", "ti,j721s2";
+	model = "PHYTEC phyBOARD-Izar-AM68x";
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart8;
+		serial3 = &main_uart2;
+		mmc1 = &main_sdhci1;
+		ethernet0 = &cpsw_port1;
+	};
+
+	chosen {
+		stdout-path = &main_uart8;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver4: can-phy4 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	vcc_12v0: regulator-12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/* Output of TLV7158P */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/* Output of SiC431 */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+	};
+
+	vcc_5v0: regulator-vcc-5v0 {
+		/* Output of LM5116 */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_12v0>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (V27) MCASP1_AXR1.I2C2_SCL */
+			J721S2_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (W27) MCASP1_AXR2.I2C2_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
+			J721S2_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (W23) MCAN14_RX.I2C5_SDA */
+		>;
+	};
+
+	main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c8, PIN_INPUT, 4) /* (AD28) EXT_REFCLK1.MCAN1_RX */
+			J721S2_IOPAD(0x06c, PIN_OUTPUT, 0) /* (V26) MCAN1_TX */
+		>;
+	};
+
+	main_mcan13_pins_default: main-mcan13-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_INPUT, 9) /* (AG25) TIMER_IO1.MCAN13_RX */
+			J721S2_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AE28) MCAN13_TX */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	main_spi6_pins_default: main-spi6-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x030, PIN_INPUT, 8) /* (T26) GPIO0_12.SPI6_CLK */
+			J721S2_IOPAD(0x080, PIN_INPUT, 8) /* (U26) MCASP0_AXR4.SPI6_CS2 */
+			J721S2_IOPAD(0x0c4, PIN_OUTPUT, 8) /* (AB26) ECAP0_IN_APWM_OUT.SPI6_D0 */
+			J721S2_IOPAD(0x074, PIN_INPUT, 8) /* (R28) MCAN2_TX.SPI6_D1 */
+			J721S2_IOPAD(0x0dc, PIN_OUTPUT, 7) /* (AH26) SPI0_D1.GPIO0_55 */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+			pinctrl-single,pins = <
+			J721S2_IOPAD(0x05c, PIN_INPUT, 11) /* (AA26) MCASP2_AXR0.UART1_CTSn */
+			J721S2_IOPAD(0x060, PIN_OUTPUT, 11) /* (AC27) MCASP2_AXR1.UART1_RTSn */
+			J721S2_IOPAD(0x054, PIN_INPUT, 11) /* (Y27) MCASP2_ACLKX.UART1_RXD */
+			J721S2_IOPAD(0x058, PIN_OUTPUT, 11) /* (AA27) MCASP2_AFSX.UART1_TXD */
+		>;
+	};
+
+	main_uart2_pins_default: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d8, PIN_INPUT, 11) /* (AG26) SPI0_D0.UART2_RXD */
+			J721S2_IOPAD(0x068, PIN_OUTPUT, 11) /* (U28) MCAN0_RX.UART2_TXD */
+		>;
+	};
+
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+		bootph-all;
+	};
+};
+
+&wkup_pmx1 {
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721S2_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x038, PIN_INPUT, 0) /* (B27) MCU_SPI0_CLK */
+			J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B26) MCU_SPI0_CS0 */
+			J721S2_WKUP_IOPAD(0x068, PIN_INPUT, 2) /* (C23) WKUP_GPIO0_4.MCU_SPI0_CS3 */
+			J721S2_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (D24) MCU_SPI0_D0 */
+			J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 0) /* (B25) MCU_SPI0_D1 */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&i2c_som_rtc {
+	trickle-resistor-ohms = <3000>;
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	status = "okay";
+
+	exp1: gpio@20 {
+		compatible = "nxp,pca9672";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HALF/nFULL_EN", "RS485/nRS232_EN", "MCU_ETH_nRESET", "",
+				"PCIe_nRESET", "USB2.0-Hub_nRESET", "USB3.0-Hub_nRESET", "PEB_AV_BL_EN";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RPI_GPIO4", "RPI_GPIO5", "RPI_GPIO6", "RPI_GPIO19",
+				"RPI_GPIO20", "RPI_GPIO21", "RPI_GPIO22", "RPI_GPIO23",
+				"RPI_GPIO24", "RPI_GPIO25", "RPI_GPIO26", "RPI_GPIO20",
+				"LVDS_BL_nEN", "LVDS_REG_nEN", "CSI_CAM0_nRESET", "CSI_CAM1_nRESET",
+				"CSI0_CTRL1", "CSI0_CTRL2", "CSI0_CTRL3", "CSI0_CTRL4",
+				"CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", "CSI1_CTRL4";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio0_ioexp_intr_pins_default>;
+	};
+};
+
+/* CSI0 + RPI */
+&main_i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+};
+
+/* CSI1 + PCIe */
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&main_mcan13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan13_pins_default>;
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+&main_mcan16 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	phys = <&transceiver3>;
+	status = "okay";
+};
+
+/* SD-Card */
+&main_sdhci1 {
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&main_spi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi6_pins_default>;
+	cs-gpios = <&main_gpio0 55 GPIO_ACTIVE_LOW>;
+	ti,spi-num-cs = <1>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins_default>;
+	status = "okay";
+};
+
+&main_uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+	bootph-all;
+	status = "okay";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&mcu_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	status = "okay";
+};
+
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver4>;
+	status = "okay";
+};
+
+/* RPI-Header */
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+};
+
+/* RPI-Header */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+	};
+};
+
+&pcie1_rc {
+	num-lanes = <1>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
+		      <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+
+	serdes0_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 2>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&tscadc0 {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <3 4 5 6 7>;
+	};
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 1 */
+};
+
+&wkup_i2c0 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			label = "user-led1";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			label = "user-led2";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			label = "user-led3";
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+/* Shared with TIFS */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
new file mode 100644
index 000000000000..fd715fee8170
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ *
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-j721s2.dtsi"
+
+/ {
+	compatible = "phytec,am68-phycore-som", "ti,j721s2";
+	model = "PHYTEC phyCORE-AM68x";
+
+	aliases {
+		ethernet1 = &main_cpsw_port1;
+		mmc0 = &main_sdhci0;
+		rtc0 = &i2c_som_rtc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4GB RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x20000000>;
+			linux,cma-default;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a8000000 {
+			reg = <0x00 0xa8000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	vdd_sd_dv: regulator-sd {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "VDD_SD_DV";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0>,
+			 <1800000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	main_cpsw_mdio_pins_default: main-cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */
+			J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */
+			J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */
+			J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */
+			J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */
+			J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */
+			J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */
+			J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */
+			J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x004, PIN_OUTPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+};
+
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x098, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+&c71_0 {
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+	status = "okay";
+};
+
+&c71_1 {
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+	status = "okay";
+};
+
+&mailbox0_cluster0 {
+	interrupts = <436>;
+	status = "okay";
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	interrupts = <432>;
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	interrupts = <428>;
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	interrupts = <420>;
+	status = "okay";
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&main_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>;
+	status = "okay";
+};
+
+&main_cpsw_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw_mdio_pins_default>;
+	status = "okay";
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&main_cpsw_port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+/* eMMC */
+&main_sdhci0 {
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	bootph-all;
+	status = "okay";
+};
+
+/* SD card */
+&main_sdhci1 {
+	vqmmc-supply = <&vdd_sd_dv>;
+	bootph-all;
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer3 {
+	status = "reserved";
+};
+
+&main_timer4 {
+	status = "reserved";
+};
+
+&main_timer5 {
+	status = "reserved";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		bootph-all;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu_avs: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <900000>;
+		regulator-boot-on;
+		regulator-always-on;
+		bootph-pre-ram;
+	};
+
+	pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck12-supply = <&vcc_3v3>;
+		buck3-supply = <&vcc_3v3>;
+		buck4-supply = <&vcc_3v3>;
+		buck5-supply = <&vcc_3v3>;
+		ldo1-supply = <&vcc_3v3>;
+		ldo2-supply = <&vcc_3v3>;
+		ldo3-supply = <&vcc_3v3>;
+		ldo4-supply = <&vcc_3v3>;
+		ti,primary-pmic;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "VDD_DDR_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "VDD_RAM_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "VDD_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "VDD_MCU_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "VDD_MCUIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "VDD_MCUIO_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "VDDA_DLL_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "VDDA_MCU_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		bootph-all;
+	};
+
+	som_eeprom_opt: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
index 455736e378cc..ba521d661144 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
@@ -48,6 +48,6 @@
 		dma-coherent;
 		phys = <&serdes0_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..5fa70a874d7b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: regulator-vsys3v3 {
 		/* Output of LM5141 */
 		compatible = "regulator-fixed";
@@ -76,7 +87,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index b85227052f97..f28375629739 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -940,7 +940,6 @@
 	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
 
 &main_sdhci1 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
index 3cc315a0e084..281076d905f3 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
@@ -48,6 +48,6 @@
 		dma-coherent;
 		phys = <&serdes0_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5ab510a0605f..5ce5f0a3d6f5 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,6 +32,11 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie1_ctrl: pcie-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x20>;
@@ -759,12 +764,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <4>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
@@ -778,8 +783,8 @@
 		device-id = <0xb00f>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
index 65a7e54f0884..e4e5f941f20b 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
@@ -15,12 +15,11 @@
 #include "k3-pinctrl.h"
 
 &{/} {
-	hdmi-connector {
+	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 		type = "a";
 		ddc-i2c-bus = <&main_i2c1>;
-		digital;
 		/* P12 - HDMI_HPD */
 		hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>;
 
@@ -31,28 +30,32 @@
 		};
 	};
 
-	dvi-bridge {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	bridge-dvi {
 		compatible = "ti,tfp410";
 		/* P10 - HDMI_PDn */
 		powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
 
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
 
-			tfp410_in: endpoint {
-				remote-endpoint = <&dpi_out0>;
-				pclk-sample = <1>;
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out0>;
+					pclk-sample = <1>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			tfp410_out: endpoint {
-				remote-endpoint =
-					<&hdmi_connector_in>;
+				tfp410_out: endpoint {
+					remote-endpoint =
+						<&hdmi_connector_in>;
+				};
 			};
 		};
 	};
@@ -148,17 +151,23 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_vout0_pins_default>;
-};
 
-&dss_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	port@1 {
-		reg = <1>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&dp0_in>;
+			};
+		};
 
-		dpi_out0: endpoint {
-			remote-endpoint = <&tfp410_in>;
+		port@1 {
+			reg = <1>;
+			dpi_out0: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
 		};
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 4421852161dd..45311438315f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -573,6 +573,7 @@
 &ospi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	status = "okay";
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -804,7 +805,11 @@
 };
 
 &dss_ports {
-	port {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
 		dpi0_out: endpoint {
 			remote-endpoint = <&dp0_in>;
 		};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
index 4062709d6579..a8a502a6207f 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -38,7 +38,7 @@
 		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
index a8cccdcf3e3b..436085157a69 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
@@ -48,6 +48,6 @@
 		dma-coherent;
 		phys = <&serdes1_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index af3d730154ac..5bd0d36bf33e 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -44,6 +44,26 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
+		pcie0_ctrl: pcie-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
+		pcie1_ctrl: pcie-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
+		pcie2_ctrl: pcie-ctrl@4078 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4078 0x4>;
+		};
+
+		pcie3_ctrl: pcie-ctrl@407c {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x407c 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x50>;
@@ -941,12 +961,12 @@
 		reg = <0x00 0x02900000 0x00 0x1000>,
 		      <0x00 0x02907000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x10000000 0x00 0x00001000>;
+		      <0x40 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
@@ -959,8 +979,8 @@
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x40 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x40 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -970,12 +990,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
@@ -988,8 +1008,8 @@
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -1004,7 +1024,7 @@
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
@@ -1033,7 +1053,7 @@
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
index 47bb5480b5b0..4eb3cffab032 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
 };
 
 &csi_mux {
@@ -34,7 +61,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam0: endpoint {
@@ -56,7 +85,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam1: endpoint {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 440ef57be294..ffef3d1cfd55 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -184,6 +184,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -211,6 +222,20 @@
 			 <3300000 0x1>;
 	};
 
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -613,6 +638,12 @@
 		>;
 	};
 
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index a7f2f52f42f7..b6e22c242951 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -126,6 +126,8 @@
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
 			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
 			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
 			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
 			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
index 5ff390915b75..8c2cd99cf2b4 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -38,7 +38,7 @@
 		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 92bf48fdbeba..83cf0adb2cb7 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -57,6 +57,11 @@
 			#phy-cells = <1>;
 		};
 
+		pcie1_ctrl: pcie-ctrl@74 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x74 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@80 {
 			compatible = "reg-mux";
 			reg = <0x80 0x10>;
@@ -1394,12 +1399,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x800000>,
-		      <0x00 0x18000000 0x00 0x1000>;
+		      <0x41 0x00000000 0x00 0x1000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <4>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
@@ -1412,8 +1417,8 @@
 		device-id = <0xb013>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
@@ -2048,4 +2053,18 @@
 		/* reserved for MAIN_R5F1_1 */
 		status = "reserved";
 	};
+
+	gpu: gpu@4e20000000 {
+		compatible = "ti,j721s2-gpu", "img,img-bxs-4-64", "img,img-rogue";
+		reg = <0x4e 0x20000000 0x00 0x80000>;
+		clocks = <&k3_clks 130 1>;
+		clock-names = "core";
+		assigned-clocks = <&k3_clks 130 1>;
+		assigned-clock-rates = <800000000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 373 TI_SCI_PD_EXCLUSIVE>;
+		power-domain-names = "a", "b";
+		dma-coherent;
+	};
 };
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
new file mode 100644
index 000000000000..4107ef8c7b74
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for 4 x RPi Camera V2.1 on J722S-EVM board.
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+	cam0_reset_pins_default: cam0-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x03c, PIN_OUTPUT, 7) /* (R22) GPIO0_15 */
+		>;
+	};
+
+	cam1_reset_pins_default: cam1-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x044, PIN_OUTPUT, 7) /* (R26) GPIO0_17 */
+		>;
+	};
+
+	cam2_reset_pins_default: cam2-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x04c, PIN_OUTPUT, 7) /* (T25) GPIO0_19 */
+		>;
+	};
+
+	cam3_reset_pins_default: cam3-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x054, PIN_OUTPUT, 7) /* (T21) GPIO0_21 */
+		>;
+	};
+};
+
+&{/} {
+	clk_imx219_fixed: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+};
+
+&csi01_mux {
+	idle-state = <1>;
+};
+
+&csi23_mux {
+	idle-state = <1>;
+};
+
+&pca9543_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		imx219_0: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam0_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2rx0_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		imx219_1: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam1_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam1: endpoint {
+					remote-endpoint = <&csi2rx1_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&pca9543_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		imx219_2: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam2_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam2: endpoint {
+					remote-endpoint = <&csi2rx2_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		imx219_3: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam3_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam3: endpoint {
+					remote-endpoint = <&csi2rx3_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx2 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi2_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx2_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam2>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx3 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi3_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx3_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam3>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx2 {
+	status = "okay";
+};
+
+&dphy2 {
+	status = "okay";
+};
+
+&ti_csi2rx3 {
+	status = "okay";
+};
+
+&dphy3 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
new file mode 100644
index 000000000000..575113d7b481
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for 4 x TEVI OV5640 MIPI Camera module on J722S-EVM board.
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+	cam0_reset_pins_default: cam0-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x03c, PIN_OUTPUT, 7) /* (R22) GPIO0_15 */
+		>;
+	};
+
+	cam1_reset_pins_default: cam1-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x044, PIN_OUTPUT, 7) /* (R26) GPIO0_17 */
+		>;
+	};
+
+	cam2_reset_pins_default: cam2-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x04c, PIN_OUTPUT, 7) /* (T25) GPIO0_19 */
+		>;
+	};
+
+	cam3_reset_pins_default: cam3-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x054, PIN_OUTPUT, 7) /* (T21) GPIO0_21 */
+		>;
+	};
+};
+
+&{/} {
+	clk_ov5640_fixed: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+};
+
+&csi01_mux {
+	idle-state = <1>;
+};
+
+&csi23_mux {
+	idle-state = <1>;
+};
+
+&pca9543_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ov5640_0: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam0_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2rx0_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		ov5640_1: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam1_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam1: endpoint {
+					remote-endpoint = <&csi2rx1_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&pca9543_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ov5640_2: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam2_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam2: endpoint {
+					remote-endpoint = <&csi2rx2_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		ov5640_3: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam3_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam3: endpoint {
+					remote-endpoint = <&csi2rx3_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx2 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi2_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx2_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam2>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx3 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi3_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx3_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam3>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx2 {
+	status = "okay";
+};
+
+&dphy2 {
+	status = "okay";
+};
+
+&ti_csi2rx3 {
+	status = "okay";
+};
+
+&dphy3 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 2127316f36a3..a47852fdca70 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -141,6 +141,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_3v3: regulator-vsys3v3 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: regulator-mmc1 {
 		/* TPS22918DBVR */
 		compatible = "regulator-fixed";
@@ -153,6 +164,17 @@
 		bootph-all;
 	};
 
+	vsys_3v3_exp: regulator-TPS22990 {
+		/* output of TPS22990 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3_exp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_sd_dv: regulator-TLV71033 {
 		compatible = "regulator-gpio";
 		regulator-name = "tlv71033";
@@ -244,6 +266,20 @@
 		max-bitrate = <5000000>;
 		standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>;
 	};
+
+	csi01_mux: mux-controller-0 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	csi23_mux: mux-controller-1 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp1 7 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
 };
 
 &main_pmx0 {
@@ -843,8 +879,11 @@
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
 };
 
-&serdes0 {
+&serdes_wiz0 {
 	status = "okay";
+};
+
+&serdes0 {
 	serdes0_usb_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
@@ -854,8 +893,11 @@
 	};
 };
 
-&serdes1 {
+&serdes_wiz1 {
 	status = "okay";
+};
+
+&serdes1 {
 	serdes1_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 6850f50530f1..78d7e800b311 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -32,6 +32,8 @@
 		assigned-clocks = <&k3_clks 279 1>;
 		assigned-clock-parents = <&k3_clks 279 5>;
 
+		status = "disabled";
+
 		serdes0: serdes@f000000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f000000 0x00010000>;
@@ -50,8 +52,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
@@ -70,6 +70,8 @@
 		assigned-clocks = <&k3_clks 280 1>;
 		assigned-clock-parents = <&k3_clks 280 5>;
 
+		status = "disabled";
+
 		serdes1: serdes@f010000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f010000 0x00010000>;
@@ -88,8 +90,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
@@ -98,10 +98,10 @@
 		reg = <0x00 0x0f102000 0x00 0x1000>,
 		      <0x00 0x0f100000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x00001000>;
+		      <0x06 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
-			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x06 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x06 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
index d5f8c8531923..424628c63c2d 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
@@ -24,7 +24,6 @@
 };
 
 &main_cpsw0 {
-	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
index 2664f74a9c7a..fa656b7b13a1 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -5,6 +5,9 @@
  * EVM Board Schematics(j784s4): https://www.ti.com/lit/zip/sprr458
  * EVM Board Schematics(j742s2): https://www.ti.com/lit/zip/SPAC001
  */
+
+#include <dt-bindings/phy/phy-cadence.h>
+
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
@@ -1407,10 +1410,13 @@
 
 &pcie1_rc {
 	status = "okay";
+	clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
 	num-lanes = <2>;
 	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
 	phys = <&serdes0_pcie1_link>;
 	phy-names = "pcie-phy";
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x1>;
 };
 
 &serdes1 {
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..ba15d72d86d6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB on J784S4 and J742S2 EVMs for
+ * Host Mode of operation with the Type-A Connector.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp2 {
+	p12-hog {
+		/* P12 - USB2.0_MUX_SEL */
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "USB2.0_MUX_SEL";
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
diff --git linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 1944616ab357..363d68fec387 100644
--- linux-libre-6.15-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ linux-libre-6.16-gnu/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -77,7 +77,7 @@
 
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
-			reg = <0x00004080 0x30>;
+			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
 					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
@@ -126,6 +126,11 @@
 			assigned-clock-parents = <&k3_clks 157 63>;
 			#clock-cells = <0>;
 		};
+
+		acspcie0_proxy_ctrl: clock-controller@1a090 {
+			compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon";
+			reg = <0x1a090 0x4>;
+		};
 	};
 
 	main_ehrpwm0: pwm@3000000 {
@@ -1055,7 +1060,7 @@
 		reg = <0x00 0x02900000 0x00 0x1000>,
 		      <0x00 0x02907000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x10000000 0x00 0x00001000>;
+		      <0x40 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
@@ -1073,8 +1078,8 @@
 		device-id = <0xb012>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x40 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x40 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -1084,7 +1089,7 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
@@ -1102,8 +1107,8 @@
 		device-id = <0xb012>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
diff --git linux-libre-6.15-gnu/arch/arm64/configs/defconfig linux-libre-6.16-gnu/arch/arm64/configs/defconfig
index c4ce2c67c0e0..eb5c17d4c7ec 100644
--- linux-libre-6.15-gnu/arch/arm64/configs/defconfig
+++ linux-libre-6.16-gnu/arch/arm64/configs/defconfig
@@ -265,6 +265,7 @@ CONFIG_IMX_SCU=y
 CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y
 CONFIG_QCOM_QSEECOM=y
 CONFIG_QCOM_QSEECOM_UEFISECAPP=y
+CONFIG_EXYNOS_ACPM_PROTOCOL=m
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -605,6 +606,7 @@ CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ5424=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
@@ -672,12 +674,14 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_ADP5585=m
 CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_TPIC2810=m
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
 CONFIG_GPIO_AGGREGATOR=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
+CONFIG_POWER_RESET_TORADEX_EC=m
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -702,6 +706,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_TMP102=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
@@ -769,7 +774,7 @@ CONFIG_MFD_MT6397=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RK8XX_SPI=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
@@ -777,6 +782,7 @@ CONFIG_MFD_TI_LP873X=m
 CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6594_I2C=m
 CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_MFD_STM32_LPTIMER=m
 CONFIG_MFD_WCD934X=m
 CONFIG_MFD_KHADAS_MCU=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -841,6 +847,7 @@ CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
 CONFIG_VIDEO_WAVE_VPU=m
 CONFIG_VIDEO_E5010_JPEG_ENC=m
+CONFIG_VIDEO_MEDIATEK_MDP3=m
 CONFIG_VIDEO_IMX7_CSI=m
 CONFIG_VIDEO_IMX_MIPI_CSIS=m
 CONFIG_VIDEO_IMX8_ISI=m
@@ -907,6 +914,7 @@ CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_PANEL_EDP=m
+CONFIG_DRM_PANEL_HIMAX_HX8279=m
 CONFIG_DRM_PANEL_ILITEK_ILI9882T=m
 CONFIG_DRM_PANEL_KHADAS_TS050=m
 CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
@@ -914,6 +922,7 @@ CONFIG_DRM_PANEL_NOVATEK_NT36672E=m
 CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
 CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
+CONFIG_DRM_PANEL_STARTEK_KD070FHFID015=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
 CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
 CONFIG_DRM_DISPLAY_CONNECTOR=m
@@ -937,6 +946,7 @@ CONFIG_DRM_TI_SN65DSI86=m
 CONFIG_DRM_ANALOGIX_ANX7625=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_DRM_CDNS_DSI=m
 CONFIG_DRM_CDNS_MHDP8546=m
 CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE=m
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
@@ -1005,11 +1015,13 @@ CONFIG_SND_SOC_SC7280=m
 CONFIG_SND_SOC_X1E80100=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m
+CONFIG_SND_SOC_ROCKCHIP_SAI=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_RT5645=m
 CONFIG_SND_SOC_RK3399_GRU_SOUND=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SOC_MSIOF=m
 CONFIG_SND_SOC_RZ=m
 CONFIG_SND_SOC_SOF_TOPLEVEL=y
 CONFIG_SND_SOC_SOF_OF=y
@@ -1043,6 +1055,8 @@ CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
 CONFIG_SND_SOC_ES7241=m
 CONFIG_SND_SOC_ES8316=m
+CONFIG_SND_SOC_ES8328=m
+CONFIG_SND_SOC_ES8328_I2C=m
 CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
@@ -1142,6 +1156,8 @@ CONFIG_USB_MASS_STORAGE=m
 CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
+CONFIG_TYPEC_RT1711H=m
+CONFIG_TYPEC_MT6360=m
 CONFIG_TYPEC_TCPCI_MAXIM=m
 CONFIG_TYPEC_FUSB302=m
 CONFIG_TYPEC_QCOM_PMIC=m
@@ -1152,6 +1168,7 @@ CONFIG_TYPEC_TPS6598X=m
 CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_MUX_FSA4480=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_TYPEC_MUX_IT5205=m
 CONFIG_TYPEC_MUX_NB7VPQ904M=m
 CONFIG_TYPEC_MUX_PS883X=m
 CONFIG_TYPEC_MUX_WCD939X_USBSS=m
@@ -1261,6 +1278,7 @@ CONFIG_PL330_DMA=y
 CONFIG_TEGRA186_GPC_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_TEGRA210_ADMA=m
+CONFIG_MTK_UART_APDMA=m
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GPI_DMA=m
 CONFIG_QCOM_HIDMA_MGMT=y
@@ -1341,6 +1359,7 @@ CONFIG_IPQ_APSS_5018=y
 CONFIG_IPQ_CMN_PLL=m
 CONFIG_IPQ_GCC_5018=y
 CONFIG_IPQ_GCC_5332=y
+CONFIG_IPQ_GCC_5424=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_9574=y
@@ -1412,16 +1431,20 @@ CONFIG_CLK_GFM_LPASS_SM8250=m
 CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
 CONFIG_CLK_RENESAS_VBATTB=m
 CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_OMAP=m
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_TEGRA186_TIMER=y
+CONFIG_CLKSRC_STM32_LP=y
 CONFIG_RENESAS_OSTM=y
 CONFIG_ARM_MHU=y
+CONFIG_EXYNOS_MBOX=m
 CONFIG_IMX_MBOX=y
 CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
 CONFIG_MTK_ADSP_MBOX=m
+CONFIG_QCOM_CPUCP_MBOX=m
 CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
@@ -1474,29 +1497,6 @@ CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_QCOM_APR=m
 CONFIG_QCOM_ICC_BWMON=m
 CONFIG_QCOM_PBS=m
-CONFIG_ARCH_R8A77995=y
-CONFIG_ARCH_R8A77990=y
-CONFIG_ARCH_R8A77951=y
-CONFIG_ARCH_R8A77965=y
-CONFIG_ARCH_R8A77960=y
-CONFIG_ARCH_R8A77961=y
-CONFIG_ARCH_R8A779F0=y
-CONFIG_ARCH_R8A77980=y
-CONFIG_ARCH_R8A77970=y
-CONFIG_ARCH_R8A779A0=y
-CONFIG_ARCH_R8A779G0=y
-CONFIG_ARCH_R8A779H0=y
-CONFIG_ARCH_R8A774C0=y
-CONFIG_ARCH_R8A774E1=y
-CONFIG_ARCH_R8A774A1=y
-CONFIG_ARCH_R8A774B1=y
-CONFIG_ARCH_R9A07G043=y
-CONFIG_ARCH_R9A07G044=y
-CONFIG_ARCH_R9A07G054=y
-CONFIG_ARCH_R9A08G045=y
-CONFIG_ARCH_R9A09G011=y
-CONFIG_ARCH_R9A09G047=y
-CONFIG_ARCH_R9A09G057=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
@@ -1525,6 +1525,7 @@ CONFIG_EXYNOS_ADC=y
 CONFIG_IMX8QXP_ADC=m
 CONFIG_IMX93_ADC=m
 CONFIG_MAX9611=m
+CONFIG_MEDIATEK_MT6359_AUXADC=m
 CONFIG_MEDIATEK_MT6577_AUXADC=m
 CONFIG_QCOM_SPMI_VADC=m
 CONFIG_QCOM_SPMI_ADC5=m
@@ -1550,10 +1551,11 @@ CONFIG_PWM_IMX27=m
 CONFIG_PWM_MESON=m
 CONFIG_PWM_MTK_DISP=m
 CONFIG_PWM_MEDIATEK=m
-CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_RCAR=m
+CONFIG_PWM_RENESAS_RZG2L_GPT=m
+CONFIG_PWM_RENESAS_RZ_MTU3=m
 CONFIG_PWM_RENESAS_TPU=m
 CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_RZ_MTU3=m
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SL28CPLD=m
 CONFIG_PWM_SUN4I=m
@@ -1572,11 +1574,13 @@ CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_TI_SCI=y
+CONFIG_PHY_SNPS_EUSB2=m
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_NXP_PTN3222=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_DPHY=m
 CONFIG_PHY_CADENCE_DPHY_RX=m
 CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_CADENCE_SALVO=m
@@ -1586,12 +1590,15 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_HISTB_COMBPHY=y
 CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_PCIE=m
 CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_MTK_HDMI=m
+CONFIG_PHY_MTK_MIPI_DSI=m
+CONFIG_PHY_MTK_DP=m
 CONFIG_PHY_QCOM_EDP=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
-CONFIG_PHY_QCOM_SNPS_EUSB2=m
 CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_QCOM_USB_HS=m
@@ -1695,6 +1702,7 @@ CONFIG_INTERCONNECT_QCOM_SM8650=y
 CONFIG_INTERCONNECT_QCOM_SM8750=y
 CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
+CONFIG_TI_EQEP=m
 CONFIG_RZ_MTU3_CNT=m
 CONFIG_HTE=y
 CONFIG_HTE_TEGRA194=y
@@ -1730,14 +1738,13 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_CHACHA20=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_SHA512_ARM64_CE=m
 CONFIG_CRYPTO_SHA3_ARM64=m
 CONFIG_CRYPTO_SM3_ARM64_CE=m
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/Kconfig linux-libre-6.16-gnu/arch/arm64/crypto/Kconfig
index 3418c8d3c78d..c44b0f202a1f 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/arm64/crypto/Kconfig
@@ -25,18 +25,6 @@ config CRYPTO_NHPOLY1305_NEON
 	  Architecture: arm64 using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_POLY1305_NEON
-	tristate
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	default CRYPTO_LIB_POLY1305_INTERNAL
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: arm64 using:
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_SHA1_ARM64_CE
 	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
@@ -48,25 +36,6 @@ config CRYPTO_SHA1_ARM64_CE
 	  Architecture: arm64 using:
 	  - ARMv8 Crypto Extensions
 
-config CRYPTO_SHA256_ARM64
-	tristate "Hash functions: SHA-224 and SHA-256"
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64
-
-config CRYPTO_SHA2_ARM64_CE
-	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_SHA256_ARM64
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64 using:
-	  - ARMv8 Crypto Extensions
-
 config CRYPTO_SHA512_ARM64
 	tristate "Hash functions: SHA-384 and SHA-512"
 	select CRYPTO_HASH
@@ -101,7 +70,7 @@ config CRYPTO_SM3_NEON
 	tristate "Hash functions: SM3 (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 	help
 	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
 
@@ -112,7 +81,7 @@ config CRYPTO_SM3_ARM64_CE
 	tristate "Hash functions: SM3 (ARMv8.2 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 	help
 	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
 
@@ -143,7 +112,7 @@ config CRYPTO_AES_ARM64
 
 config CRYPTO_AES_ARM64_CE
 	tristate "Ciphers: AES (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON
 	select CRYPTO_ALGAPI
 	select CRYPTO_LIB_AES
 	help
@@ -186,20 +155,6 @@ config CRYPTO_AES_ARM64_NEON_BLK
 	  Architecture: arm64 using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_CHACHA20_NEON
-	tristate
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SKCIPHER
-	select CRYPTO_LIB_CHACHA_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	default CRYPTO_LIB_CHACHA_INTERNAL
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: arm64 using:
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_AES_ARM64_BS
 	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XCTR/XTS modes (bit-sliced NEON)"
 	depends on KERNEL_MODE_NEON
@@ -267,7 +222,7 @@ config CRYPTO_SM4_ARM64_NEON_BLK
 
 config CRYPTO_AES_ARM64_CE_CCM
 	tristate "AEAD cipher: AES in CCM mode (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES_ARM64_CE
 	select CRYPTO_AES_ARM64_CE_BLK
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/Makefile linux-libre-6.16-gnu/arch/arm64/crypto/Makefile
index e7139c4768ce..c231c980c514 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/crypto/Makefile
@@ -8,9 +8,6 @@
 obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o
 sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o
 
-obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o
-sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o
-
 obj-$(CONFIG_CRYPTO_SHA512_ARM64_CE) += sha512-ce.o
 sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o
 
@@ -56,19 +53,9 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o
 obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
 aes-neon-blk-y := aes-glue-neon.o aes-neon.o
 
-obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o
-sha256-arm64-y := sha256-glue.o sha256-core.o
-
 obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o
 sha512-arm64-y := sha512-glue.o sha512-core.o
 
-obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
-poly1305-neon-y := poly1305-core.o poly1305-glue.o
-AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_init_arm64
-
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
 
@@ -81,10 +68,7 @@ aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o
 quiet_cmd_perlasm = PERLASM $@
       cmd_perlasm = $(PERL) $(<) void $(@)
 
-$(obj)/%-core.S: $(src)/%-armv8.pl
-	$(call cmd,perlasm)
-
-$(obj)/sha256-core.S: $(src)/sha512-armv8.pl
+$(obj)/sha512-core.S: $(src)/../lib/crypto/sha2-armv8.pl
 	$(call cmd,perlasm)
 
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
+clean-files += sha512-core.S
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/aes-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/aes-glue.c
index b0150999743f..81560f722b9d 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/aes-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/aes-glue.c
@@ -5,19 +5,20 @@
  * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
-#include <asm/neon.h>
 #include <asm/hwcap.h>
-#include <asm/simd.h>
+#include <asm/neon.h>
 #include <crypto/aes.h>
 #include <crypto/ctr.h>
-#include <crypto/sha2.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
-#include <linux/module.h>
-#include <linux/cpufeature.h>
+#include <crypto/sha2.h>
+#include <crypto/utils.h>
 #include <crypto/xts.h>
+#include <linux/cpufeature.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
 
 #include "aes-ce-setkey.h"
 
@@ -130,7 +131,6 @@ struct mac_tfm_ctx {
 };
 
 struct mac_desc_ctx {
-	unsigned int len;
 	u8 dg[AES_BLOCK_SIZE];
 };
 
@@ -869,109 +869,64 @@ static int mac_init(struct shash_desc *desc)
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
 	memset(ctx->dg, 0, AES_BLOCK_SIZE);
-	ctx->len = 0;
-
 	return 0;
 }
 
 static void mac_do_update(struct crypto_aes_ctx *ctx, u8 const in[], int blocks,
-			  u8 dg[], int enc_before, int enc_after)
+			  u8 dg[], int enc_before)
 {
 	int rounds = 6 + ctx->key_length / 4;
+	int rem;
 
-	if (crypto_simd_usable()) {
-		int rem;
-
-		do {
-			kernel_neon_begin();
-			rem = aes_mac_update(in, ctx->key_enc, rounds, blocks,
-					     dg, enc_before, enc_after);
-			kernel_neon_end();
-			in += (blocks - rem) * AES_BLOCK_SIZE;
-			blocks = rem;
-			enc_before = 0;
-		} while (blocks);
-	} else {
-		if (enc_before)
-			aes_encrypt(ctx, dg, dg);
-
-		while (blocks--) {
-			crypto_xor(dg, in, AES_BLOCK_SIZE);
-			in += AES_BLOCK_SIZE;
-
-			if (blocks || enc_after)
-				aes_encrypt(ctx, dg, dg);
-		}
-	}
+	do {
+		kernel_neon_begin();
+		rem = aes_mac_update(in, ctx->key_enc, rounds, blocks,
+				     dg, enc_before, !enc_before);
+		kernel_neon_end();
+		in += (blocks - rem) * AES_BLOCK_SIZE;
+		blocks = rem;
+	} while (blocks);
 }
 
 static int mac_update(struct shash_desc *desc, const u8 *p, unsigned int len)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+	int blocks = len / AES_BLOCK_SIZE;
 
-	while (len > 0) {
-		unsigned int l;
-
-		if ((ctx->len % AES_BLOCK_SIZE) == 0 &&
-		    (ctx->len + len) > AES_BLOCK_SIZE) {
-
-			int blocks = len / AES_BLOCK_SIZE;
-
-			len %= AES_BLOCK_SIZE;
-
-			mac_do_update(&tctx->key, p, blocks, ctx->dg,
-				      (ctx->len != 0), (len != 0));
-
-			p += blocks * AES_BLOCK_SIZE;
-
-			if (!len) {
-				ctx->len = AES_BLOCK_SIZE;
-				break;
-			}
-			ctx->len = 0;
-		}
-
-		l = min(len, AES_BLOCK_SIZE - ctx->len);
-
-		if (l <= AES_BLOCK_SIZE) {
-			crypto_xor(ctx->dg + ctx->len, p, l);
-			ctx->len += l;
-			len -= l;
-			p += l;
-		}
-	}
-
-	return 0;
+	len %= AES_BLOCK_SIZE;
+	mac_do_update(&tctx->key, p, blocks, ctx->dg, 0);
+	return len;
 }
 
-static int cbcmac_final(struct shash_desc *desc, u8 *out)
+static int cbcmac_finup(struct shash_desc *desc, const u8 *src,
+			unsigned int len, u8 *out)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	mac_do_update(&tctx->key, NULL, 0, ctx->dg, (ctx->len != 0), 0);
-
+	if (len) {
+		crypto_xor(ctx->dg, src, len);
+		mac_do_update(&tctx->key, NULL, 0, ctx->dg, 1);
+	}
 	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
-
 	return 0;
 }
 
-static int cmac_final(struct shash_desc *desc, u8 *out)
+static int cmac_finup(struct shash_desc *desc, const u8 *src, unsigned int len,
+		      u8 *out)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 	u8 *consts = tctx->consts;
 
-	if (ctx->len != AES_BLOCK_SIZE) {
-		ctx->dg[ctx->len] ^= 0x80;
+	crypto_xor(ctx->dg, src, len);
+	if (len != AES_BLOCK_SIZE) {
+		ctx->dg[len] ^= 0x80;
 		consts += AES_BLOCK_SIZE;
 	}
-
-	mac_do_update(&tctx->key, consts, 1, ctx->dg, 0, 1);
-
+	mac_do_update(&tctx->key, consts, 1, ctx->dg, 0);
 	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
-
 	return 0;
 }
 
@@ -979,6 +934,8 @@ static struct shash_alg mac_algs[] = { {
 	.base.cra_name		= "cmac(aes)",
 	.base.cra_driver_name	= "cmac-aes-" MODE,
 	.base.cra_priority	= PRIO,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
 				  2 * AES_BLOCK_SIZE,
@@ -987,13 +944,15 @@ static struct shash_alg mac_algs[] = { {
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cmac_final,
+	.finup			= cmac_finup,
 	.setkey			= cmac_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 }, {
 	.base.cra_name		= "xcbc(aes)",
 	.base.cra_driver_name	= "xcbc-aes-" MODE,
 	.base.cra_priority	= PRIO,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
 				  2 * AES_BLOCK_SIZE,
@@ -1002,21 +961,22 @@ static struct shash_alg mac_algs[] = { {
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cmac_final,
+	.finup			= cmac_finup,
 	.setkey			= xcbc_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 }, {
 	.base.cra_name		= "cbcmac(aes)",
 	.base.cra_driver_name	= "cbcmac-aes-" MODE,
 	.base.cra_priority	= PRIO,
-	.base.cra_blocksize	= 1,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx),
 	.base.cra_module	= THIS_MODULE,
 
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cbcmac_final,
+	.finup			= cbcmac_finup,
 	.setkey			= cbcmac_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 } };
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/chacha-neon-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/chacha-neon-glue.c
deleted file mode 100644
index 229876acfc58..000000000000
--- linux-libre-6.15-gnu/arch/arm64/crypto/chacha-neon-glue.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * ARM NEON and scalar accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on:
- * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
- *
- * Copyright (C) 2015 Martin Willi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void chacha_block_xor_neon(u32 *state, u8 *dst, const u8 *src,
-				      int nrounds);
-asmlinkage void chacha_4block_xor_neon(u32 *state, u8 *dst, const u8 *src,
-				       int nrounds, int bytes);
-asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-			  int bytes, int nrounds)
-{
-	while (bytes > 0) {
-		int l = min(bytes, CHACHA_BLOCK_SIZE * 5);
-
-		if (l <= CHACHA_BLOCK_SIZE) {
-			u8 buf[CHACHA_BLOCK_SIZE];
-
-			memcpy(buf, src, l);
-			chacha_block_xor_neon(state, buf, buf, nrounds);
-			memcpy(dst, buf, l);
-			state[12] += 1;
-			break;
-		}
-		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
-	}
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) {
-		hchacha_block_generic(state, stream, nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, stream, nrounds);
-		kernel_neon_end();
-	}
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE ||
-	    !crypto_simd_usable())
-		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		kernel_neon_begin();
-		chacha_doneon(state, dst, src, todo, nrounds);
-		kernel_neon_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_neon_stream_xor(struct skcipher_request *req,
-				  const struct chacha_ctx *ctx, const u8 *iv)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = rounddown(nbytes, walk.stride);
-
-		if (!static_branch_likely(&have_neon) ||
-		    !crypto_simd_usable()) {
-			chacha_crypt_generic(state, walk.dst.virt.addr,
-					     walk.src.virt.addr, nbytes,
-					     ctx->nrounds);
-		} else {
-			kernel_neon_begin();
-			chacha_doneon(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			kernel_neon_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int chacha_neon(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_neon_stream_xor(req, ctx, req->iv);
-}
-
-static int xchacha_neon(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init(state, ctx->key, req->iv);
-	hchacha_block_arch(state, subctx.key, ctx->nrounds);
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_neon_stream_xor(req, &subctx, real_iv);
-}
-
-static struct skcipher_alg algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_neon,
-		.decrypt		= chacha_neon,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	if (!cpu_have_named_feature(ASIMD))
-		return 0;
-
-	static_branch_enable(&have_neon);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ?
-		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && cpu_have_named_feature(ASIMD))
-		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (NEON accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-neon");
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/ghash-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/ghash-ce-glue.c
index 071e122f9c37..4995b6e22335 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/ghash-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/ghash-ce-glue.c
@@ -6,30 +6,27 @@
  */
 
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/gcm.h>
-#include <crypto/algapi.h>
 #include <crypto/b128ops.h>
+#include <crypto/gcm.h>
+#include <crypto/ghash.h>
 #include <crypto/gf128mul.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
 
 MODULE_DESCRIPTION("GHASH and AES-GCM using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS_CRYPTO("ghash");
 
-#define GHASH_BLOCK_SIZE	16
-#define GHASH_DIGEST_SIZE	16
-
 #define RFC4106_NONCE_SIZE	4
 
 struct ghash_key {
@@ -37,10 +34,8 @@ struct ghash_key {
 	u64			h[][2];
 };
 
-struct ghash_desc_ctx {
+struct arm_ghash_desc_ctx {
 	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
-	u8 buf[GHASH_BLOCK_SIZE];
-	u32 count;
 };
 
 struct gcm_aes_ctx {
@@ -65,36 +60,12 @@ asmlinkage int pmull_gcm_decrypt(int bytes, u8 dst[], const u8 src[],
 
 static int ghash_init(struct shash_desc *desc)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	*ctx = (struct ghash_desc_ctx){};
+	*ctx = (struct arm_ghash_desc_ctx){};
 	return 0;
 }
 
-static void ghash_do_update(int blocks, u64 dg[], const char *src,
-			    struct ghash_key *key, const char *head)
-{
-	be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
-
-	do {
-		const u8 *in = src;
-
-		if (head) {
-			in = head;
-			blocks++;
-			head = NULL;
-		} else {
-			src += GHASH_BLOCK_SIZE;
-		}
-
-		crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
-		gf128mul_lle(&dst, &key->k);
-	} while (--blocks);
-
-	dg[0] = be64_to_cpu(dst.b);
-	dg[1] = be64_to_cpu(dst.a);
-}
-
 static __always_inline
 void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 			  struct ghash_key *key, const char *head,
@@ -103,13 +74,9 @@ void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 					      u64 const h[][2],
 					      const char *head))
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		simd_update(blocks, dg, src, key->h, head);
-		kernel_neon_end();
-	} else {
-		ghash_do_update(blocks, dg, src, key, head);
-	}
+	kernel_neon_begin();
+	simd_update(blocks, dg, src, key->h, head);
+	kernel_neon_end();
 }
 
 /* avoid hogging the CPU for too long */
@@ -118,61 +85,59 @@ void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 static int ghash_update(struct shash_desc *desc, const u8 *src,
 			unsigned int len)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	int blocks;
 
-	ctx->count += len;
+	blocks = len / GHASH_BLOCK_SIZE;
+	len -= blocks * GHASH_BLOCK_SIZE;
 
-	if ((partial + len) >= GHASH_BLOCK_SIZE) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-		int blocks;
-
-		if (partial) {
-			int p = GHASH_BLOCK_SIZE - partial;
+	do {
+		int chunk = min(blocks, MAX_BLOCKS);
 
-			memcpy(ctx->buf + partial, src, p);
-			src += p;
-			len -= p;
-		}
+		ghash_do_simd_update(chunk, ctx->digest, src, key, NULL,
+				     pmull_ghash_update_p8);
+		blocks -= chunk;
+		src += chunk * GHASH_BLOCK_SIZE;
+	} while (unlikely(blocks > 0));
+	return len;
+}
 
-		blocks = len / GHASH_BLOCK_SIZE;
-		len %= GHASH_BLOCK_SIZE;
+static int ghash_export(struct shash_desc *desc, void *out)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *dst = out;
 
-		do {
-			int chunk = min(blocks, MAX_BLOCKS);
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+	return 0;
+}
 
-			ghash_do_simd_update(chunk, ctx->digest, src, key,
-					     partial ? ctx->buf : NULL,
-					     pmull_ghash_update_p8);
+static int ghash_import(struct shash_desc *desc, const void *in)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *src = in;
 
-			blocks -= chunk;
-			src += chunk * GHASH_BLOCK_SIZE;
-			partial = 0;
-		} while (unlikely(blocks > 0));
-	}
-	if (len)
-		memcpy(ctx->buf + partial, src, len);
+	ctx->digest[1] = get_unaligned_be64(src);
+	ctx->digest[0] = get_unaligned_be64(src + 8);
 	return 0;
 }
 
-static int ghash_final(struct shash_desc *desc, u8 *dst)
+static int ghash_finup(struct shash_desc *desc, const u8 *src,
+		       unsigned int len, u8 *dst)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
 
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		ghash_do_simd_update(1, ctx->digest, ctx->buf, key, NULL,
+		memcpy(buf, src, len);
+		ghash_do_simd_update(1, ctx->digest, src, key, NULL,
 				     pmull_ghash_update_p8);
+		memzero_explicit(buf, sizeof(buf));
 	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	memzero_explicit(ctx, sizeof(*ctx));
-	return 0;
+	return ghash_export(desc, dst);
 }
 
 static void ghash_reflect(u64 h[], const be128 *k)
@@ -205,6 +170,7 @@ static struct shash_alg ghash_alg = {
 	.base.cra_name		= "ghash",
 	.base.cra_driver_name	= "ghash-neon",
 	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
@@ -212,9 +178,12 @@ static struct shash_alg ghash_alg = {
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
 	.update			= ghash_update,
-	.final			= ghash_final,
+	.finup			= ghash_finup,
 	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
+	.export			= ghash_export,
+	.import			= ghash_import,
+	.descsize		= sizeof(struct arm_ghash_desc_ctx),
+	.statesize		= sizeof(struct ghash_desc_ctx),
 };
 
 static int num_rounds(struct crypto_aes_ctx *ctx)
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/poly1305-glue.c
deleted file mode 100644
index 18883ea438f3..000000000000
--- linux-libre-6.15-gnu/arch/arm64/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/jump_label.h>
-#include <linux/module.h>
-
-asmlinkage void poly1305_init_arm64(void *state, const u8 *key);
-asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_arm64(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int neon_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit, bool do_neon)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_arm64(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	if (static_branch_likely(&have_neon) && likely(do_neon))
-		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-	else
-		poly1305_blocks(&dctx->h, src, len, hibit);
-}
-
-static void neon_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-				    const u8 *src, u32 len, bool do_neon)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			neon_poly1305_blocks(dctx, dctx->buf,
-					     POLY1305_BLOCK_SIZE, 1, false);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		neon_poly1305_blocks(dctx, src, len, 1, do_neon);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-}
-
-static int neon_poly1305_update(struct shash_desc *desc,
-				const u8 *src, unsigned int srclen)
-{
-	bool do_neon = crypto_simd_usable() && srclen > 128;
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_begin();
-	neon_poly1305_do_update(dctx, src, srclen, do_neon);
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_end();
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-			do {
-				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-
-				kernel_neon_begin();
-				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-				kernel_neon_end();
-
-				len -= todo;
-				src += todo;
-			} while (len);
-		} else {
-			poly1305_blocks(&dctx->h, src, len, 1);
-			src += len;
-		}
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit(&dctx->h, dst, dctx->s);
-	memzero_explicit(dctx, sizeof(*dctx));
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int neon_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg neon_poly1305_alg = {
-	.init			= neon_poly1305_init,
-	.update			= neon_poly1305_update,
-	.final			= neon_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-neon",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-};
-
-static int __init neon_poly1305_mod_init(void)
-{
-	if (!cpu_have_named_feature(ASIMD))
-		return 0;
-
-	static_branch_enable(&have_neon);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shash(&neon_poly1305_alg) : 0;
-}
-
-static void __exit neon_poly1305_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD))
-		crypto_unregister_shash(&neon_poly1305_alg);
-}
-
-module_init(neon_poly1305_mod_init);
-module_exit(neon_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Poly1305 transform using NEON instructions");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/polyval-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/polyval-ce-glue.c
index 0a3b5718df85..c4e653688ea0 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/polyval-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/polyval-ce-glue.c
@@ -15,17 +15,15 @@
  * ARMv8 Crypto Extensions instructions to implement the finite field operations.
  */
 
-#include <crypto/algapi.h>
+#include <asm/neon.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/polyval.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
+#include <crypto/utils.h>
+#include <linux/cpufeature.h>
+#include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/cpufeature.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
+#include <linux/string.h>
 
 #define NUM_KEY_POWERS	8
 
@@ -38,7 +36,6 @@ struct polyval_tfm_ctx {
 
 struct polyval_desc_ctx {
 	u8 buffer[POLYVAL_BLOCK_SIZE];
-	u32 bytes;
 };
 
 asmlinkage void pmull_polyval_update(const struct polyval_tfm_ctx *keys,
@@ -48,25 +45,16 @@ asmlinkage void pmull_polyval_mul(u8 *op1, const u8 *op2);
 static void internal_polyval_update(const struct polyval_tfm_ctx *keys,
 	const u8 *in, size_t nblocks, u8 *accumulator)
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		pmull_polyval_update(keys, in, nblocks, accumulator);
-		kernel_neon_end();
-	} else {
-		polyval_update_non4k(keys->key_powers[NUM_KEY_POWERS-1], in,
-			nblocks, accumulator);
-	}
+	kernel_neon_begin();
+	pmull_polyval_update(keys, in, nblocks, accumulator);
+	kernel_neon_end();
 }
 
 static void internal_polyval_mul(u8 *op1, const u8 *op2)
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		pmull_polyval_mul(op1, op2);
-		kernel_neon_end();
-	} else {
-		polyval_mul_non4k(op1, op2);
-	}
+	kernel_neon_begin();
+	pmull_polyval_mul(op1, op2);
+	kernel_neon_end();
 }
 
 static int polyval_arm64_setkey(struct crypto_shash *tfm,
@@ -103,49 +91,27 @@ static int polyval_arm64_update(struct shash_desc *desc,
 {
 	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
 	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
-	u8 *pos;
 	unsigned int nblocks;
-	unsigned int n;
-
-	if (dctx->bytes) {
-		n = min(srclen, dctx->bytes);
-		pos = dctx->buffer + POLYVAL_BLOCK_SIZE - dctx->bytes;
-
-		dctx->bytes -= n;
-		srclen -= n;
 
-		while (n--)
-			*pos++ ^= *src++;
-
-		if (!dctx->bytes)
-			internal_polyval_mul(dctx->buffer,
-					    tctx->key_powers[NUM_KEY_POWERS-1]);
-	}
-
-	while (srclen >= POLYVAL_BLOCK_SIZE) {
+	do {
 		/* allow rescheduling every 4K bytes */
 		nblocks = min(srclen, 4096U) / POLYVAL_BLOCK_SIZE;
 		internal_polyval_update(tctx, src, nblocks, dctx->buffer);
 		srclen -= nblocks * POLYVAL_BLOCK_SIZE;
 		src += nblocks * POLYVAL_BLOCK_SIZE;
-	}
+	} while (srclen >= POLYVAL_BLOCK_SIZE);
 
-	if (srclen) {
-		dctx->bytes = POLYVAL_BLOCK_SIZE - srclen;
-		pos = dctx->buffer;
-		while (srclen--)
-			*pos++ ^= *src++;
-	}
-
-	return 0;
+	return srclen;
 }
 
-static int polyval_arm64_final(struct shash_desc *desc, u8 *dst)
+static int polyval_arm64_finup(struct shash_desc *desc, const u8 *src,
+			       unsigned int len, u8 *dst)
 {
 	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
 	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 
-	if (dctx->bytes) {
+	if (len) {
+		crypto_xor(dctx->buffer, src, len);
 		internal_polyval_mul(dctx->buffer,
 				     tctx->key_powers[NUM_KEY_POWERS-1]);
 	}
@@ -159,13 +125,14 @@ static struct shash_alg polyval_alg = {
 	.digestsize	= POLYVAL_DIGEST_SIZE,
 	.init		= polyval_arm64_init,
 	.update		= polyval_arm64_update,
-	.final		= polyval_arm64_final,
+	.finup		= polyval_arm64_finup,
 	.setkey		= polyval_arm64_setkey,
 	.descsize	= sizeof(struct polyval_desc_ctx),
 	.base		= {
 		.cra_name		= "polyval",
 		.cra_driver_name	= "polyval-ce",
 		.cra_priority		= 200,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize		= POLYVAL_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct polyval_tfm_ctx),
 		.cra_module		= THIS_MODULE,
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha1-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha1-ce-glue.c
index cbd14f208f83..65b6980817e5 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha1-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sha1-ce-glue.c
@@ -7,14 +7,14 @@
 
 #include <asm/neon.h>
 #include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
 
 MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
@@ -56,79 +56,49 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
 {
 	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
 
-	if (!crypto_simd_usable())
-		return crypto_sha1_update(desc, data, len);
-
 	sctx->finalize = 0;
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-
-	return 0;
+	return sha1_base_do_update_blocks(desc, data, len, sha1_ce_transform);
 }
 
 static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
 			 unsigned int len, u8 *out)
 {
 	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-	bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE) && len;
-
-	if (!crypto_simd_usable())
-		return crypto_sha1_finup(desc, data, len, out);
+	bool finalized = false;
 
 	/*
 	 * Allow the asm code to perform the finalization if there is no
 	 * partial data and the input is a round multiple of the block size.
 	 */
-	sctx->finalize = finalize;
-
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	if (!finalize)
-		sha1_base_do_finalize(desc, sha1_ce_transform);
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_ce_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return crypto_sha1_finup(desc, NULL, 0, out);
-
-	sctx->finalize = 0;
-	sha1_base_do_finalize(desc, sha1_ce_transform);
+	if (len >= SHA1_BLOCK_SIZE) {
+		unsigned int remain = len - round_down(len, SHA1_BLOCK_SIZE);
+
+		finalized = !remain;
+		sctx->finalize = finalized;
+		sha1_base_do_update_blocks(desc, data, len, sha1_ce_transform);
+		data += len - remain;
+		len = remain;
+	}
+	if (!finalized) {
+		sctx->finalize = 0;
+		sha1_base_do_finup(desc, data, len, sha1_ce_transform);
+	}
 	return sha1_base_finish(desc, out);
 }
 
-static int sha1_ce_export(struct shash_desc *desc, void *out)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, &sctx->sst, sizeof(struct sha1_state));
-	return 0;
-}
-
-static int sha1_ce_import(struct shash_desc *desc, const void *in)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(&sctx->sst, in, sizeof(struct sha1_state));
-	sctx->finalize = 0;
-	return 0;
-}
-
 static struct shash_alg alg = {
 	.init			= sha1_base_init,
 	.update			= sha1_ce_update,
-	.final			= sha1_ce_final,
 	.finup			= sha1_ce_finup,
-	.import			= sha1_ce_import,
-	.export			= sha1_ce_export,
 	.descsize		= sizeof(struct sha1_ce_state),
-	.statesize		= sizeof(struct sha1_state),
+	.statesize		= SHA1_STATE_SIZE,
 	.digestsize		= SHA1_DIGEST_SIZE,
 	.base			= {
 		.cra_name		= "sha1",
 		.cra_driver_name	= "sha1-ce",
 		.cra_priority		= 200,
+		.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					  CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize		= SHA1_BLOCK_SIZE,
 		.cra_module		= THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha2-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha2-ce-glue.c
deleted file mode 100644
index 6b4866a88ded..000000000000
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha2-ce-glue.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha224");
-MODULE_ALIAS_CRYPTO("sha256");
-
-struct sha256_ce_state {
-	struct sha256_state	sst;
-	u32			finalize;
-};
-
-extern const u32 sha256_ce_offsetof_count;
-extern const u32 sha256_ce_offsetof_finalize;
-
-asmlinkage int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-				     int blocks);
-
-static void sha256_ce_transform(struct sha256_state *sst, u8 const *src,
-				int blocks)
-{
-	while (blocks) {
-		int rem;
-
-		kernel_neon_begin();
-		rem = __sha256_ce_transform(container_of(sst,
-							 struct sha256_ce_state,
-							 sst), src, blocks);
-		kernel_neon_end();
-		src += (blocks - rem) * SHA256_BLOCK_SIZE;
-		blocks = rem;
-	}
-}
-
-const u32 sha256_ce_offsetof_count = offsetof(struct sha256_ce_state,
-					      sst.count);
-const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state,
-						 finalize);
-
-asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks);
-
-static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha256_block_data_order(sst->state, src, blocks);
-}
-
-static int sha256_ce_update(struct shash_desc *desc, const u8 *data,
-			    unsigned int len)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return sha256_base_do_update(desc, data, len,
-					     sha256_arm64_transform);
-
-	sctx->finalize = 0;
-	sha256_base_do_update(desc, data, len, sha256_ce_transform);
-
-	return 0;
-}
-
-static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-	bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE) && len;
-
-	if (!crypto_simd_usable()) {
-		if (len)
-			sha256_base_do_update(desc, data, len,
-					      sha256_arm64_transform);
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-		return sha256_base_finish(desc, out);
-	}
-
-	/*
-	 * Allow the asm code to perform the finalization if there is no
-	 * partial data and the input is a round multiple of the block size.
-	 */
-	sctx->finalize = finalize;
-
-	sha256_base_do_update(desc, data, len, sha256_ce_transform);
-	if (!finalize)
-		sha256_base_do_finalize(desc, sha256_ce_transform);
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_ce_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable()) {
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-		return sha256_base_finish(desc, out);
-	}
-
-	sctx->finalize = 0;
-	sha256_base_do_finalize(desc, sha256_ce_transform);
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_ce_digest(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *out)
-{
-	sha256_base_init(desc);
-	return sha256_ce_finup(desc, data, len, out);
-}
-
-static int sha256_ce_export(struct shash_desc *desc, void *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, &sctx->sst, sizeof(struct sha256_state));
-	return 0;
-}
-
-static int sha256_ce_import(struct shash_desc *desc, const void *in)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(&sctx->sst, in, sizeof(struct sha256_state));
-	sctx->finalize = 0;
-	return 0;
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha224_base_init,
-	.update			= sha256_ce_update,
-	.final			= sha256_ce_final,
-	.finup			= sha256_ce_finup,
-	.export			= sha256_ce_export,
-	.import			= sha256_ce_import,
-	.descsize		= sizeof(struct sha256_ce_state),
-	.statesize		= sizeof(struct sha256_state),
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha224",
-		.cra_driver_name	= "sha224-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-}, {
-	.init			= sha256_base_init,
-	.update			= sha256_ce_update,
-	.final			= sha256_ce_final,
-	.finup			= sha256_ce_finup,
-	.digest			= sha256_ce_digest,
-	.export			= sha256_ce_export,
-	.import			= sha256_ce_import,
-	.descsize		= sizeof(struct sha256_ce_state),
-	.statesize		= sizeof(struct sha256_state),
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha256",
-		.cra_driver_name	= "sha256-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha2_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha2_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA2, sha2_ce_mod_init);
-module_exit(sha2_ce_mod_fini);
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha256-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha256-glue.c
deleted file mode 100644
index 35356987cc1e..000000000000
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha256-glue.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Linux/arm64 port of the OpenSSL SHA256 implementation for AArch64
- *
- * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash for arm64");
-MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha224");
-MODULE_ALIAS_CRYPTO("sha256");
-
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
-EXPORT_SYMBOL(sha256_block_data_order);
-
-static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha256_block_data_order(sst->state, src, blocks);
-}
-
-asmlinkage void sha256_block_neon(u32 *digest, const void *data,
-				  unsigned int num_blks);
-
-static void sha256_neon_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks)
-{
-	sha256_block_neon(sst->state, src, blocks);
-}
-
-static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data,
-				      unsigned int len)
-{
-	return sha256_base_do_update(desc, data, len, sha256_arm64_transform);
-}
-
-static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data,
-				     unsigned int len, u8 *out)
-{
-	if (len)
-		sha256_base_do_update(desc, data, len, sha256_arm64_transform);
-	sha256_base_do_finalize(desc, sha256_arm64_transform);
-
-	return sha256_base_finish(desc, out);
-}
-
-static int crypto_sha256_arm64_final(struct shash_desc *desc, u8 *out)
-{
-	return crypto_sha256_arm64_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.init			= sha256_base_init,
-	.update			= crypto_sha256_arm64_update,
-	.final			= crypto_sha256_arm64_final,
-	.finup			= crypto_sha256_arm64_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha256",
-	.base.cra_driver_name	= "sha256-arm64",
-	.base.cra_priority	= 125,
-	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.init			= sha224_base_init,
-	.update			= crypto_sha256_arm64_update,
-	.final			= crypto_sha256_arm64_final,
-	.finup			= crypto_sha256_arm64_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha224",
-	.base.cra_driver_name	= "sha224-arm64",
-	.base.cra_priority	= 125,
-	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return sha256_base_do_update(desc, data, len,
-				sha256_arm64_transform);
-
-	while (len > 0) {
-		unsigned int chunk = len;
-
-		/*
-		 * Don't hog the CPU for the entire time it takes to process all
-		 * input when running on a preemptible kernel, but process the
-		 * data block by block instead.
-		 */
-		if (IS_ENABLED(CONFIG_PREEMPTION) &&
-		    chunk + sctx->count % SHA256_BLOCK_SIZE > SHA256_BLOCK_SIZE)
-			chunk = SHA256_BLOCK_SIZE -
-				sctx->count % SHA256_BLOCK_SIZE;
-
-		kernel_neon_begin();
-		sha256_base_do_update(desc, data, chunk, sha256_neon_transform);
-		kernel_neon_end();
-		data += chunk;
-		len -= chunk;
-	}
-	return 0;
-}
-
-static int sha256_finup_neon(struct shash_desc *desc, const u8 *data,
-			     unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		if (len)
-			sha256_base_do_update(desc, data, len,
-				sha256_arm64_transform);
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-	} else {
-		if (len)
-			sha256_update_neon(desc, data, len);
-		kernel_neon_begin();
-		sha256_base_do_finalize(desc, sha256_neon_transform);
-		kernel_neon_end();
-	}
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_final_neon(struct shash_desc *desc, u8 *out)
-{
-	return sha256_finup_neon(desc, NULL, 0, out);
-}
-
-static struct shash_alg neon_algs[] = { {
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.init			= sha256_base_init,
-	.update			= sha256_update_neon,
-	.final			= sha256_final_neon,
-	.finup			= sha256_finup_neon,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha256",
-	.base.cra_driver_name	= "sha256-arm64-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.init			= sha224_base_init,
-	.update			= sha256_update_neon,
-	.final			= sha256_final_neon,
-	.finup			= sha256_finup_neon,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha224",
-	.base.cra_driver_name	= "sha224-arm64-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init sha256_mod_init(void)
-{
-	int ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-	if (ret)
-		return ret;
-
-	if (cpu_have_named_feature(ASIMD)) {
-		ret = crypto_register_shashes(neon_algs, ARRAY_SIZE(neon_algs));
-		if (ret)
-			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-	}
-	return ret;
-}
-
-static void __exit sha256_mod_fini(void)
-{
-	if (cpu_have_named_feature(ASIMD))
-		crypto_unregister_shashes(neon_algs, ARRAY_SIZE(neon_algs));
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_init(sha256_mod_init);
-module_exit(sha256_mod_fini);
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha3-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha3-ce-glue.c
index 5662c3ac49e9..b4f1001046c9 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha3-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sha3-ce-glue.c
@@ -12,13 +12,13 @@
 #include <asm/hwcap.h>
 #include <asm/neon.h>
 #include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sha3.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
 
 MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
@@ -35,74 +35,55 @@ static int sha3_update(struct shash_desc *desc, const u8 *data,
 		       unsigned int len)
 {
 	struct sha3_state *sctx = shash_desc_ctx(desc);
-	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
-
-	if (!crypto_simd_usable())
-		return crypto_sha3_update(desc, data, len);
-
-	if ((sctx->partial + len) >= sctx->rsiz) {
-		int blocks;
-
-		if (sctx->partial) {
-			int p = sctx->rsiz - sctx->partial;
-
-			memcpy(sctx->buf + sctx->partial, data, p);
-			kernel_neon_begin();
-			sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
-			kernel_neon_end();
-
-			data += p;
-			len -= p;
-			sctx->partial = 0;
-		}
-
-		blocks = len / sctx->rsiz;
-		len %= sctx->rsiz;
-
-		while (blocks) {
-			int rem;
-
-			kernel_neon_begin();
-			rem = sha3_ce_transform(sctx->st, data, blocks,
-						digest_size);
-			kernel_neon_end();
-			data += (blocks - rem) * sctx->rsiz;
-			blocks = rem;
-		}
-	}
-
-	if (len) {
-		memcpy(sctx->buf + sctx->partial, data, len);
-		sctx->partial += len;
-	}
-	return 0;
+	struct crypto_shash *tfm = desc->tfm;
+	unsigned int bs, ds;
+	int blocks;
+
+	ds = crypto_shash_digestsize(tfm);
+	bs = crypto_shash_blocksize(tfm);
+	blocks = len / bs;
+	len -= blocks * bs;
+	do {
+		int rem;
+
+		kernel_neon_begin();
+		rem = sha3_ce_transform(sctx->st, data, blocks, ds);
+		kernel_neon_end();
+		data += (blocks - rem) * bs;
+		blocks = rem;
+	} while (blocks);
+	return len;
 }
 
-static int sha3_final(struct shash_desc *desc, u8 *out)
+static int sha3_finup(struct shash_desc *desc, const u8 *src, unsigned int len,
+		      u8 *out)
 {
 	struct sha3_state *sctx = shash_desc_ctx(desc);
-	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
+	struct crypto_shash *tfm = desc->tfm;
 	__le64 *digest = (__le64 *)out;
+	u8 block[SHA3_224_BLOCK_SIZE];
+	unsigned int bs, ds;
 	int i;
 
-	if (!crypto_simd_usable())
-		return crypto_sha3_final(desc, out);
+	ds = crypto_shash_digestsize(tfm);
+	bs = crypto_shash_blocksize(tfm);
+	memcpy(block, src, len);
 
-	sctx->buf[sctx->partial++] = 0x06;
-	memset(sctx->buf + sctx->partial, 0, sctx->rsiz - sctx->partial);
-	sctx->buf[sctx->rsiz - 1] |= 0x80;
+	block[len++] = 0x06;
+	memset(block + len, 0, bs - len);
+	block[bs - 1] |= 0x80;
 
 	kernel_neon_begin();
-	sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
+	sha3_ce_transform(sctx->st, block, 1, ds);
 	kernel_neon_end();
+	memzero_explicit(block , sizeof(block));
 
-	for (i = 0; i < digest_size / 8; i++)
+	for (i = 0; i < ds / 8; i++)
 		put_unaligned_le64(sctx->st[i], digest++);
 
-	if (digest_size & 4)
+	if (ds & 4)
 		put_unaligned_le32(sctx->st[i], (__le32 *)digest);
 
-	memzero_explicit(sctx, sizeof(*sctx));
 	return 0;
 }
 
@@ -110,10 +91,11 @@ static struct shash_alg algs[] = { {
 	.digestsize		= SHA3_224_DIGEST_SIZE,
 	.init			= crypto_sha3_init,
 	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
+	.finup			= sha3_finup,
+	.descsize		= SHA3_STATE_SIZE,
 	.base.cra_name		= "sha3-224",
 	.base.cra_driver_name	= "sha3-224-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= SHA3_224_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
@@ -121,10 +103,11 @@ static struct shash_alg algs[] = { {
 	.digestsize		= SHA3_256_DIGEST_SIZE,
 	.init			= crypto_sha3_init,
 	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
+	.finup			= sha3_finup,
+	.descsize		= SHA3_STATE_SIZE,
 	.base.cra_name		= "sha3-256",
 	.base.cra_driver_name	= "sha3-256-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= SHA3_256_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
@@ -132,10 +115,11 @@ static struct shash_alg algs[] = { {
 	.digestsize		= SHA3_384_DIGEST_SIZE,
 	.init			= crypto_sha3_init,
 	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
+	.finup			= sha3_finup,
+	.descsize		= SHA3_STATE_SIZE,
 	.base.cra_name		= "sha3-384",
 	.base.cra_driver_name	= "sha3-384-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= SHA3_384_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
@@ -143,10 +127,11 @@ static struct shash_alg algs[] = { {
 	.digestsize		= SHA3_512_DIGEST_SIZE,
 	.init			= crypto_sha3_init,
 	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
+	.finup			= sha3_finup,
+	.descsize		= SHA3_STATE_SIZE,
 	.base.cra_name		= "sha3-512",
 	.base.cra_driver_name	= "sha3-512-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= SHA3_512_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha512-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha512-ce-glue.c
index 071f64293227..6fb3001fa2c9 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha512-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sha512-ce-glue.c
@@ -10,14 +10,11 @@
  */
 
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sha2.h>
 #include <crypto/sha512_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions");
@@ -29,12 +26,10 @@ MODULE_ALIAS_CRYPTO("sha512");
 asmlinkage int __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
 				     int blocks);
 
-asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks);
-
 static void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
 				int blocks)
 {
-	while (blocks) {
+	do {
 		int rem;
 
 		kernel_neon_begin();
@@ -42,67 +37,47 @@ static void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
 		kernel_neon_end();
 		src += (blocks - rem) * SHA512_BLOCK_SIZE;
 		blocks = rem;
-	}
-}
-
-static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha512_block_data_order(sst->state, src, blocks);
+	} while (blocks);
 }
 
 static int sha512_ce_update(struct shash_desc *desc, const u8 *data,
 			    unsigned int len)
 {
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_update(desc, data, len, fn);
-	return 0;
+	return sha512_base_do_update_blocks(desc, data, len,
+					    sha512_ce_transform);
 }
 
 static int sha512_ce_finup(struct shash_desc *desc, const u8 *data,
 			   unsigned int len, u8 *out)
 {
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_update(desc, data, len, fn);
-	sha512_base_do_finalize(desc, fn);
-	return sha512_base_finish(desc, out);
-}
-
-static int sha512_ce_final(struct shash_desc *desc, u8 *out)
-{
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_finalize(desc, fn);
+	sha512_base_do_finup(desc, data, len, sha512_ce_transform);
 	return sha512_base_finish(desc, out);
 }
 
 static struct shash_alg algs[] = { {
 	.init			= sha384_base_init,
 	.update			= sha512_ce_update,
-	.final			= sha512_ce_final,
 	.finup			= sha512_ce_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA384_DIGEST_SIZE,
 	.base.cra_name		= "sha384",
 	.base.cra_driver_name	= "sha384-ce",
 	.base.cra_priority	= 200,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 }, {
 	.init			= sha512_base_init,
 	.update			= sha512_ce_update,
-	.final			= sha512_ce_final,
 	.finup			= sha512_ce_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.digestsize		= SHA512_DIGEST_SIZE,
 	.base.cra_name		= "sha512",
 	.base.cra_driver_name	= "sha512-ce",
 	.base.cra_priority	= 200,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 } };
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha512-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sha512-glue.c
index 62f129dea83d..15aa9d8b7b2c 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha512-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sha512-glue.c
@@ -6,11 +6,10 @@
  */
 
 #include <crypto/internal/hash.h>
-#include <linux/types.h>
-#include <linux/string.h>
 #include <crypto/sha2.h>
 #include <crypto/sha512_base.h>
-#include <asm/neon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 
 MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash for arm64");
 MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
@@ -19,59 +18,53 @@ MODULE_LICENSE("GPL v2");
 MODULE_ALIAS_CRYPTO("sha384");
 MODULE_ALIAS_CRYPTO("sha512");
 
-asmlinkage void sha512_block_data_order(u64 *digest, const void *data,
-					unsigned int num_blks);
-EXPORT_SYMBOL(sha512_block_data_order);
+asmlinkage void sha512_blocks_arch(u64 *digest, const void *data,
+				   unsigned int num_blks);
 
 static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
 				   int blocks)
 {
-	sha512_block_data_order(sst->state, src, blocks);
+	sha512_blocks_arch(sst->state, src, blocks);
 }
 
 static int sha512_update(struct shash_desc *desc, const u8 *data,
 			 unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len, sha512_arm64_transform);
+	return sha512_base_do_update_blocks(desc, data, len,
+					    sha512_arm64_transform);
 }
 
 static int sha512_finup(struct shash_desc *desc, const u8 *data,
 			unsigned int len, u8 *out)
 {
-	if (len)
-		sha512_base_do_update(desc, data, len, sha512_arm64_transform);
-	sha512_base_do_finalize(desc, sha512_arm64_transform);
-
+	sha512_base_do_finup(desc, data, len, sha512_arm64_transform);
 	return sha512_base_finish(desc, out);
 }
 
-static int sha512_final(struct shash_desc *desc, u8 *out)
-{
-	return sha512_finup(desc, NULL, 0, out);
-}
-
 static struct shash_alg algs[] = { {
 	.digestsize		= SHA512_DIGEST_SIZE,
 	.init			= sha512_base_init,
 	.update			= sha512_update,
-	.final			= sha512_final,
 	.finup			= sha512_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.base.cra_name		= "sha512",
 	.base.cra_driver_name	= "sha512-arm64",
 	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 }, {
 	.digestsize		= SHA384_DIGEST_SIZE,
 	.init			= sha384_base_init,
 	.update			= sha512_update,
-	.final			= sha512_final,
 	.finup			= sha512_finup,
-	.descsize		= sizeof(struct sha512_state),
+	.descsize		= SHA512_STATE_SIZE,
 	.base.cra_name		= "sha384",
 	.base.cra_driver_name	= "sha384-arm64",
 	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SHA384_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 } };
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sm3-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sm3-ce-glue.c
index 1a71788c4cda..eac6f5fa0abe 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sm3-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sm3-ce-glue.c
@@ -6,14 +6,11 @@
  */
 
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sm3.h>
 #include <crypto/sm3_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 MODULE_DESCRIPTION("SM3 secure hash using ARMv8 Crypto Extensions");
@@ -26,50 +23,20 @@ asmlinkage void sm3_ce_transform(struct sm3_state *sst, u8 const *src,
 static int sm3_ce_update(struct shash_desc *desc, const u8 *data,
 			 unsigned int len)
 {
-	if (!crypto_simd_usable()) {
-		sm3_update(shash_desc_ctx(desc), data, len);
-		return 0;
-	}
+	int remain;
 
 	kernel_neon_begin();
-	sm3_base_do_update(desc, data, len, sm3_ce_transform);
+	remain = sm3_base_do_update_blocks(desc, data, len, sm3_ce_transform);
 	kernel_neon_end();
-
-	return 0;
-}
-
-static int sm3_ce_final(struct shash_desc *desc, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		sm3_final(shash_desc_ctx(desc), out);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	sm3_base_do_finalize(desc, sm3_ce_transform);
-	kernel_neon_end();
-
-	return sm3_base_finish(desc, out);
+	return remain;
 }
 
 static int sm3_ce_finup(struct shash_desc *desc, const u8 *data,
 			unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable()) {
-		struct sm3_state *sctx = shash_desc_ctx(desc);
-
-		if (len)
-			sm3_update(sctx, data, len);
-		sm3_final(sctx, out);
-		return 0;
-	}
-
 	kernel_neon_begin();
-	if (len)
-		sm3_base_do_update(desc, data, len, sm3_ce_transform);
-	sm3_base_do_finalize(desc, sm3_ce_transform);
+	sm3_base_do_finup(desc, data, len, sm3_ce_transform);
 	kernel_neon_end();
-
 	return sm3_base_finish(desc, out);
 }
 
@@ -77,11 +44,12 @@ static struct shash_alg sm3_alg = {
 	.digestsize		= SM3_DIGEST_SIZE,
 	.init			= sm3_base_init,
 	.update			= sm3_ce_update,
-	.final			= sm3_ce_final,
 	.finup			= sm3_ce_finup,
-	.descsize		= sizeof(struct sm3_state),
+	.descsize		= SM3_STATE_SIZE,
 	.base.cra_name		= "sm3",
 	.base.cra_driver_name	= "sm3-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SM3_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 400,
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sm3-neon-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sm3-neon-glue.c
index 8dd71ce79b69..6c4611a503a3 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sm3-neon-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sm3-neon-glue.c
@@ -6,14 +6,11 @@
  */
 
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sm3.h>
 #include <crypto/sm3_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 
@@ -23,50 +20,20 @@ asmlinkage void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
 static int sm3_neon_update(struct shash_desc *desc, const u8 *data,
 			   unsigned int len)
 {
-	if (!crypto_simd_usable()) {
-		sm3_update(shash_desc_ctx(desc), data, len);
-		return 0;
-	}
+	int remain;
 
 	kernel_neon_begin();
-	sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	remain = sm3_base_do_update_blocks(desc, data, len, sm3_neon_transform);
 	kernel_neon_end();
-
-	return 0;
-}
-
-static int sm3_neon_final(struct shash_desc *desc, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		sm3_final(shash_desc_ctx(desc), out);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	sm3_base_do_finalize(desc, sm3_neon_transform);
-	kernel_neon_end();
-
-	return sm3_base_finish(desc, out);
+	return remain;
 }
 
 static int sm3_neon_finup(struct shash_desc *desc, const u8 *data,
 			  unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable()) {
-		struct sm3_state *sctx = shash_desc_ctx(desc);
-
-		if (len)
-			sm3_update(sctx, data, len);
-		sm3_final(sctx, out);
-		return 0;
-	}
-
 	kernel_neon_begin();
-	if (len)
-		sm3_base_do_update(desc, data, len, sm3_neon_transform);
-	sm3_base_do_finalize(desc, sm3_neon_transform);
+	sm3_base_do_finup(desc, data, len, sm3_neon_transform);
 	kernel_neon_end();
-
 	return sm3_base_finish(desc, out);
 }
 
@@ -74,11 +41,12 @@ static struct shash_alg sm3_alg = {
 	.digestsize		= SM3_DIGEST_SIZE,
 	.init			= sm3_base_init,
 	.update			= sm3_neon_update,
-	.final			= sm3_neon_final,
 	.finup			= sm3_neon_finup,
-	.descsize		= sizeof(struct sm3_state),
+	.descsize		= SM3_STATE_SIZE,
 	.base.cra_name		= "sm3",
 	.base.cra_driver_name	= "sm3-neon",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SM3_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sm4-ce-glue.c linux-libre-6.16-gnu/arch/arm64/crypto/sm4-ce-glue.c
index 43741bed874e..7a60e7b559dc 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sm4-ce-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/crypto/sm4-ce-glue.c
@@ -8,19 +8,18 @@
  * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
  */
 
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <linux/kernel.h>
-#include <linux/cpufeature.h>
 #include <asm/neon.h>
-#include <asm/simd.h>
 #include <crypto/b128ops.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
 #include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
-#include <crypto/xts.h>
 #include <crypto/sm4.h>
+#include <crypto/utils.h>
+#include <crypto/xts.h>
+#include <linux/cpufeature.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
 
 #define BYTES2BLKS(nbytes)	((nbytes) >> 4)
 
@@ -64,7 +63,6 @@ struct sm4_mac_tfm_ctx {
 };
 
 struct sm4_mac_desc_ctx {
-	unsigned int len;
 	u8 digest[SM4_BLOCK_SIZE];
 };
 
@@ -591,8 +589,6 @@ static int sm4_mac_init(struct shash_desc *desc)
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
 	memset(ctx->digest, 0, SM4_BLOCK_SIZE);
-	ctx->len = 0;
-
 	return 0;
 }
 
@@ -601,87 +597,50 @@ static int sm4_mac_update(struct shash_desc *desc, const u8 *p,
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int l, nblocks;
-
-	if (len == 0)
-		return 0;
-
-	if (ctx->len || ctx->len + len < SM4_BLOCK_SIZE) {
-		l = min(len, SM4_BLOCK_SIZE - ctx->len);
-
-		crypto_xor(ctx->digest + ctx->len, p, l);
-		ctx->len += l;
-		len -= l;
-		p += l;
-	}
-
-	if (len && (ctx->len % SM4_BLOCK_SIZE) == 0) {
-		kernel_neon_begin();
-
-		if (len < SM4_BLOCK_SIZE && ctx->len == SM4_BLOCK_SIZE) {
-			sm4_ce_crypt_block(tctx->key.rkey_enc,
-					   ctx->digest, ctx->digest);
-			ctx->len = 0;
-		} else {
-			nblocks = len / SM4_BLOCK_SIZE;
-			len %= SM4_BLOCK_SIZE;
+	unsigned int nblocks = len / SM4_BLOCK_SIZE;
 
-			sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, p,
-					  nblocks, (ctx->len == SM4_BLOCK_SIZE),
-					  (len != 0));
-
-			p += nblocks * SM4_BLOCK_SIZE;
-
-			if (len == 0)
-				ctx->len = SM4_BLOCK_SIZE;
-		}
-
-		kernel_neon_end();
-
-		if (len) {
-			crypto_xor(ctx->digest, p, len);
-			ctx->len = len;
-		}
-	}
-
-	return 0;
+	len %= SM4_BLOCK_SIZE;
+	kernel_neon_begin();
+	sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, p,
+			  nblocks, false, true);
+	kernel_neon_end();
+	return len;
 }
 
-static int sm4_cmac_final(struct shash_desc *desc, u8 *out)
+static int sm4_cmac_finup(struct shash_desc *desc, const u8 *src,
+			  unsigned int len, u8 *out)
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 	const u8 *consts = tctx->consts;
 
-	if (ctx->len != SM4_BLOCK_SIZE) {
-		ctx->digest[ctx->len] ^= 0x80;
+	crypto_xor(ctx->digest, src, len);
+	if (len != SM4_BLOCK_SIZE) {
+		ctx->digest[len] ^= 0x80;
 		consts += SM4_BLOCK_SIZE;
 	}
-
 	kernel_neon_begin();
 	sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, consts, 1,
 			  false, true);
 	kernel_neon_end();
-
 	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
-
 	return 0;
 }
 
-static int sm4_cbcmac_final(struct shash_desc *desc, u8 *out)
+static int sm4_cbcmac_finup(struct shash_desc *desc, const u8 *src,
+			    unsigned int len, u8 *out)
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (ctx->len) {
+	if (len) {
+		crypto_xor(ctx->digest, src, len);
 		kernel_neon_begin();
 		sm4_ce_crypt_block(tctx->key.rkey_enc, ctx->digest,
 				   ctx->digest);
 		kernel_neon_end();
 	}
-
 	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
-
 	return 0;
 }
 
@@ -691,6 +650,8 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "cmac(sm4)",
 			.cra_driver_name	= "cmac-sm4-ce",
 			.cra_priority		= 400,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+						  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
 							+ SM4_BLOCK_SIZE * 2,
@@ -699,7 +660,7 @@ static struct shash_alg sm4_mac_algs[] = {
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cmac_final,
+		.finup		= sm4_cmac_finup,
 		.setkey		= sm4_cmac_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}, {
@@ -707,6 +668,8 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "xcbc(sm4)",
 			.cra_driver_name	= "xcbc-sm4-ce",
 			.cra_priority		= 400,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+						  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
 							+ SM4_BLOCK_SIZE * 2,
@@ -715,7 +678,7 @@ static struct shash_alg sm4_mac_algs[] = {
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cmac_final,
+		.finup		= sm4_cmac_finup,
 		.setkey		= sm4_xcbc_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}, {
@@ -723,14 +686,15 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "cbcmac(sm4)",
 			.cra_driver_name	= "cbcmac-sm4-ce",
 			.cra_priority		= 400,
-			.cra_blocksize		= 1,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx),
 			.cra_module		= THIS_MODULE,
 		},
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cbcmac_final,
+		.finup		= sm4_cbcmac_finup,
 		.setkey		= sm4_cbcmac_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}
diff --git linux-libre-6.15-gnu/arch/arm64/hyperv/mshyperv.c linux-libre-6.16-gnu/arch/arm64/hyperv/mshyperv.c
index 4e27cc29c79e..4fdc26ade1d7 100644
--- linux-libre-6.15-gnu/arch/arm64/hyperv/mshyperv.c
+++ linux-libre-6.16-gnu/arch/arm64/hyperv/mshyperv.c
@@ -28,6 +28,48 @@ int hv_get_hypervisor_version(union hv_hypervisor_version_info *info)
 }
 EXPORT_SYMBOL_GPL(hv_get_hypervisor_version);
 
+#ifdef CONFIG_ACPI
+
+static bool __init hyperv_detect_via_acpi(void)
+{
+	if (acpi_disabled)
+		return false;
+	/*
+	 * Hypervisor ID is only available in ACPI v6+, and the
+	 * structure layout was extended in v6 to accommodate that
+	 * new field.
+	 *
+	 * At the very minimum, this check makes sure not to read
+	 * past the FADT structure.
+	 *
+	 * It is also needed to catch running in some unknown
+	 * non-Hyper-V environment that has ACPI 5.x or less.
+	 * In such a case, it can't be Hyper-V.
+	 */
+	if (acpi_gbl_FADT.header.revision < 6)
+		return false;
+	return strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8) == 0;
+}
+
+#else
+
+static bool __init hyperv_detect_via_acpi(void)
+{
+	return false;
+}
+
+#endif
+
+static bool __init hyperv_detect_via_smccc(void)
+{
+	uuid_t hyperv_uuid = UUID_INIT(
+		0x58ba324d, 0x6447, 0x24cd,
+		0x75, 0x6c, 0xef, 0x8e,
+		0x24, 0x70, 0x59, 0x16);
+
+	return arm_smccc_hypervisor_has_uuid(&hyperv_uuid);
+}
+
 static int __init hyperv_init(void)
 {
 	struct hv_get_vp_registers_output	result;
@@ -36,13 +78,11 @@ static int __init hyperv_init(void)
 
 	/*
 	 * Allow for a kernel built with CONFIG_HYPERV to be running in
-	 * a non-Hyper-V environment, including on DT instead of ACPI.
+	 * a non-Hyper-V environment.
+	 *
 	 * In such cases, do nothing and return success.
 	 */
-	if (acpi_disabled)
-		return 0;
-
-	if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8))
+	if (!hyperv_detect_via_acpi() && !hyperv_detect_via_smccc())
 		return 0;
 
 	/* Setup the guest ID */
@@ -77,6 +117,9 @@ static int __init hyperv_init(void)
 
 	if (ms_hyperv.priv_high & HV_ACCESS_PARTITION_ID)
 		hv_get_partition_id();
+	ms_hyperv.vtl = get_vtl();
+	if (ms_hyperv.vtl > 0) /* non default VTL */
+		pr_info("Linux runs in Hyper-V Virtual Trust Level %d\n", ms_hyperv.vtl);
 
 	ms_hyperv_late_init();
 
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/assembler.h linux-libre-6.16-gnu/arch/arm64/include/asm/assembler.h
index ad63457a05c5..c56c21bb1eec 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/assembler.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/assembler.h
@@ -41,6 +41,11 @@
 /*
  * Save/restore interrupts.
  */
+	.macro save_and_disable_daif, flags
+	mrs	\flags, daif
+	msr	daifset, #0xf
+	.endm
+
 	.macro	save_and_disable_irq, flags
 	mrs	\flags, daif
 	msr	daifset, #3
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/cpu.h linux-libre-6.16-gnu/arch/arm64/include/asm/cpu.h
index 81e4157f92b7..71493b760b83 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/cpu.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/cpu.h
@@ -44,6 +44,7 @@ struct cpuinfo_arm64 {
 	u64		reg_dczid;
 	u64		reg_midr;
 	u64		reg_revidr;
+	u64		reg_aidr;
 	u64		reg_gmid;
 	u64		reg_smidr;
 	u64		reg_mpamidr;
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/cputype.h linux-libre-6.16-gnu/arch/arm64/include/asm/cputype.h
index dffff6763812..661735616787 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/cputype.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/cputype.h
@@ -134,6 +134,7 @@
 
 #define HISI_CPU_PART_TSV110		0xD01
 #define HISI_CPU_PART_HIP09			0xD02
+#define HISI_CPU_PART_HIP12		0xD06
 
 #define APPLE_CPU_PART_M1_ICESTORM	0x022
 #define APPLE_CPU_PART_M1_FIRESTORM	0x023
@@ -222,6 +223,7 @@
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
 #define MIDR_HISI_HIP09 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP09)
+#define MIDR_HISI_HIP12 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP12)
 #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
 #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
 #define MIDR_APPLE_M1_ICESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_PRO)
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/el2_setup.h linux-libre-6.16-gnu/arch/arm64/include/asm/el2_setup.h
index d40e427ddad9..9f38340d24c2 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/el2_setup.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/el2_setup.h
@@ -38,7 +38,7 @@
 
 	orr	x0, x0, #HCR_E2H
 .LnVHE_\@:
-	msr	hcr_el2, x0
+	msr_hcr_el2 x0
 	isb
 .endm
 
@@ -204,26 +204,28 @@
 	orr	x0, x0, #(1 << 62)
 
 .Lskip_spe_fgt_\@:
+
+.Lset_debug_fgt_\@:
 	msr_s	SYS_HDFGRTR_EL2, x0
 	msr_s	SYS_HDFGWTR_EL2, x0
 
 	mov	x0, xzr
 	mrs	x1, id_aa64pfr1_el1
 	ubfx	x1, x1, #ID_AA64PFR1_EL1_SME_SHIFT, #4
-	cbz	x1, .Lskip_debug_fgt_\@
+	cbz	x1, .Lskip_sme_fgt_\@
 
 	/* Disable nVHE traps of TPIDR2 and SMPRI */
-	orr	x0, x0, #HFGxTR_EL2_nSMPRI_EL1_MASK
-	orr	x0, x0, #HFGxTR_EL2_nTPIDR2_EL0_MASK
+	orr	x0, x0, #HFGRTR_EL2_nSMPRI_EL1_MASK
+	orr	x0, x0, #HFGRTR_EL2_nTPIDR2_EL0_MASK
 
-.Lskip_debug_fgt_\@:
+.Lskip_sme_fgt_\@:
 	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
 	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
 	cbz	x1, .Lskip_pie_fgt_\@
 
 	/* Disable trapping of PIR_EL1 / PIRE0_EL1 */
-	orr	x0, x0, #HFGxTR_EL2_nPIR_EL1
-	orr	x0, x0, #HFGxTR_EL2_nPIRE0_EL1
+	orr	x0, x0, #HFGRTR_EL2_nPIR_EL1
+	orr	x0, x0, #HFGRTR_EL2_nPIRE0_EL1
 
 .Lskip_pie_fgt_\@:
 	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
@@ -231,17 +233,19 @@
 	cbz	x1, .Lskip_poe_fgt_\@
 
 	/* Disable trapping of POR_EL0 */
-	orr	x0, x0, #HFGxTR_EL2_nPOR_EL0
+	orr	x0, x0, #HFGRTR_EL2_nPOR_EL0
 
 .Lskip_poe_fgt_\@:
 	/* GCS depends on PIE so we don't check it if PIE is absent */
 	mrs_s	x1, SYS_ID_AA64PFR1_EL1
 	ubfx	x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
-	cbz	x1, .Lset_fgt_\@
+	cbz	x1, .Lskip_gce_fgt_\@
 
 	/* Disable traps of access to GCS registers at EL0 and EL1 */
-	orr	x0, x0, #HFGxTR_EL2_nGCS_EL1_MASK
-	orr	x0, x0, #HFGxTR_EL2_nGCS_EL0_MASK
+	orr	x0, x0, #HFGRTR_EL2_nGCS_EL1_MASK
+	orr	x0, x0, #HFGRTR_EL2_nGCS_EL0_MASK
+
+.Lskip_gce_fgt_\@:
 
 .Lset_fgt_\@:
 	msr_s	SYS_HFGRTR_EL2, x0
@@ -283,30 +287,6 @@
 .Lskip_fgt2_\@:
 .endm
 
-.macro __init_el2_gcs
-	mrs_s	x1, SYS_ID_AA64PFR1_EL1
-	ubfx	x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
-	cbz	x1, .Lskip_gcs_\@
-
-	/* Ensure GCS is not enabled when we start trying to do BLs */
-	msr_s	SYS_GCSCR_EL1, xzr
-	msr_s	SYS_GCSCRE0_EL1, xzr
-.Lskip_gcs_\@:
-.endm
-
-.macro __init_el2_mpam
-	/* Memory Partitioning And Monitoring: disable EL2 traps */
-	mrs	x1, id_aa64pfr0_el1
-	ubfx	x0, x1, #ID_AA64PFR0_EL1_MPAM_SHIFT, #4
-	cbz	x0, .Lskip_mpam_\@		// skip if no MPAM
-	msr_s	SYS_MPAM2_EL2, xzr		// use the default partition
-						// and disable lower traps
-	mrs_s	x0, SYS_MPAMIDR_EL1
-	tbz	x0, #MPAMIDR_EL1_HAS_HCR_SHIFT, .Lskip_mpam_\@	// skip if no MPAMHCR reg
-	msr_s	SYS_MPAMHCR_EL2, xzr		// clear TRAP_MPAMIDR_EL1 -> EL2
-.Lskip_mpam_\@:
-.endm
-
 /**
  * Initialize EL2 registers to sane values. This should be called early on all
  * cores that were booted in EL2. Note that everything gets initialised as
@@ -324,12 +304,10 @@
 	__init_el2_stage2
 	__init_el2_gicv3
 	__init_el2_hstr
-	__init_el2_mpam
 	__init_el2_nvhe_idregs
 	__init_el2_cptr
 	__init_el2_fgt
 	__init_el2_fgt2
-        __init_el2_gcs
 .endm
 
 #ifndef __KVM_NVHE_HYPERVISOR__
@@ -371,6 +349,23 @@
 #endif
 
 .macro finalise_el2_state
+	check_override id_aa64pfr0, ID_AA64PFR0_EL1_MPAM_SHIFT, .Linit_mpam_\@, .Lskip_mpam_\@, x1, x2
+
+.Linit_mpam_\@:
+	msr_s	SYS_MPAM2_EL2, xzr		// use the default partition
+						// and disable lower traps
+	mrs_s	x0, SYS_MPAMIDR_EL1
+	tbz	x0, #MPAMIDR_EL1_HAS_HCR_SHIFT, .Lskip_mpam_\@  // skip if no MPAMHCR reg
+	msr_s   SYS_MPAMHCR_EL2, xzr		// clear TRAP_MPAMIDR_EL1 -> EL2
+
+.Lskip_mpam_\@:
+	check_override id_aa64pfr1, ID_AA64PFR1_EL1_GCS_SHIFT, .Linit_gcs_\@, .Lskip_gcs_\@, x1, x2
+
+.Linit_gcs_\@:
+	msr_s	SYS_GCSCR_EL1, xzr
+	msr_s	SYS_GCSCRE0_EL1, xzr
+
+.Lskip_gcs_\@:
 	check_override id_aa64pfr0, ID_AA64PFR0_EL1_SVE_SHIFT, .Linit_sve_\@, .Lskip_sve_\@, x1, x2
 
 .Linit_sve_\@:	/* SVE register access */
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/esr.h linux-libre-6.16-gnu/arch/arm64/include/asm/esr.h
index e4f77757937e..e1deed824464 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/esr.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/esr.h
@@ -20,7 +20,8 @@
 #define ESR_ELx_EC_FP_ASIMD	UL(0x07)
 #define ESR_ELx_EC_CP10_ID	UL(0x08)	/* EL2 only */
 #define ESR_ELx_EC_PAC		UL(0x09)	/* EL2 and above */
-/* Unallocated EC: 0x0A - 0x0B */
+#define ESR_ELx_EC_OTHER	UL(0x0A)
+/* Unallocated EC: 0x0B */
 #define ESR_ELx_EC_CP14_64	UL(0x0C)
 #define ESR_ELx_EC_BTI		UL(0x0D)
 #define ESR_ELx_EC_ILL		UL(0x0E)
@@ -99,6 +100,8 @@
 #define ESR_ELx_AET_CE		(UL(6) << ESR_ELx_AET_SHIFT)
 
 /* Shared ISS field definitions for Data/Instruction aborts */
+#define ESR_ELx_VNCR_SHIFT	(13)
+#define ESR_ELx_VNCR		(UL(1) << ESR_ELx_VNCR_SHIFT)
 #define ESR_ELx_SET_SHIFT	(11)
 #define ESR_ELx_SET_MASK	(UL(3) << ESR_ELx_SET_SHIFT)
 #define ESR_ELx_FnV_SHIFT	(10)
@@ -181,6 +184,13 @@
 #define ESR_ELx_WFx_ISS_WFE	(UL(1) << 0)
 #define ESR_ELx_xVC_IMM_MASK	((UL(1) << 16) - 1)
 
+/* ISS definitions for LD64B/ST64B/{T,P}SBCSYNC instructions */
+#define ESR_ELx_ISS_OTHER_ST64BV	(0)
+#define ESR_ELx_ISS_OTHER_ST64BV0	(1)
+#define ESR_ELx_ISS_OTHER_LDST64B	(2)
+#define ESR_ELx_ISS_OTHER_TSBCSYNC	(3)
+#define ESR_ELx_ISS_OTHER_PSBCSYNC	(4)
+
 #define DISR_EL1_IDS		(UL(1) << 24)
 /*
  * DISR_EL1 and ESR_ELx share the bottom 13 bits, but the RES0 bits may mean
@@ -378,12 +388,14 @@
 /*
  * ISS values for SME traps
  */
+#define ESR_ELx_SME_ISS_SMTC_MASK		GENMASK(2, 0)
+#define ESR_ELx_SME_ISS_SMTC(esr)		((esr) & ESR_ELx_SME_ISS_SMTC_MASK)
 
-#define ESR_ELx_SME_ISS_SME_DISABLED	0
-#define ESR_ELx_SME_ISS_ILL		1
-#define ESR_ELx_SME_ISS_SM_DISABLED	2
-#define ESR_ELx_SME_ISS_ZA_DISABLED	3
-#define ESR_ELx_SME_ISS_ZT_DISABLED	4
+#define ESR_ELx_SME_ISS_SMTC_SME_DISABLED	0
+#define ESR_ELx_SME_ISS_SMTC_ILL		1
+#define ESR_ELx_SME_ISS_SMTC_SM_DISABLED	2
+#define ESR_ELx_SME_ISS_SMTC_ZA_DISABLED	3
+#define ESR_ELx_SME_ISS_SMTC_ZT_DISABLED	4
 
 /* ISS field definitions for MOPS exceptions */
 #define ESR_ELx_MOPS_ISS_MEM_INST	(UL(1) << 24)
@@ -440,6 +452,11 @@ static inline bool esr_is_cfi_brk(unsigned long esr)
 	       (esr_brk_comment(esr) & ~CFI_BRK_IMM_MASK) == CFI_BRK_IMM_BASE;
 }
 
+static inline bool esr_is_ubsan_brk(unsigned long esr)
+{
+	return (esr_brk_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM;
+}
+
 static inline bool esr_fsc_is_translation_fault(unsigned long esr)
 {
 	esr = esr & ESR_ELx_FSC;
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/fixmap.h linux-libre-6.16-gnu/arch/arm64/include/asm/fixmap.h
index 87e307804b99..635a43c4ec85 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/fixmap.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/fixmap.h
@@ -48,6 +48,12 @@ enum fixed_addresses {
 	FIX_EARLYCON_MEM_BASE,
 	FIX_TEXT_POKE0,
 
+#ifdef CONFIG_KVM
+	/* One slot per CPU, mapping the guest's VNCR page at EL2. */
+	FIX_VNCR_END,
+	FIX_VNCR = FIX_VNCR_END + NR_CPUS,
+#endif
+
 #ifdef CONFIG_ACPI_APEI_GHES
 	/* Used for GHES mapping from assorted contexts */
 	FIX_APEI_GHES_IRQ,
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/fpsimd.h linux-libre-6.16-gnu/arch/arm64/include/asm/fpsimd.h
index 564bc09b3e06..b8cf0ea43cc0 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/fpsimd.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/fpsimd.h
@@ -6,6 +6,7 @@
 #define __ASM_FP_H
 
 #include <asm/errno.h>
+#include <asm/percpu.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
@@ -76,7 +77,6 @@ extern void fpsimd_load_state(struct user_fpsimd_state *state);
 extern void fpsimd_thread_switch(struct task_struct *next);
 extern void fpsimd_flush_thread(void);
 
-extern void fpsimd_signal_preserve_current_state(void);
 extern void fpsimd_preserve_current_state(void);
 extern void fpsimd_restore_current_state(void);
 extern void fpsimd_update_current_state(struct user_fpsimd_state const *state);
@@ -93,9 +93,12 @@ struct cpu_fp_state {
 	enum fp_type to_save;
 };
 
+DECLARE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+
 extern void fpsimd_bind_state_to_cpu(struct cpu_fp_state *fp_state);
 
 extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void fpsimd_save_and_flush_current_state(void);
 extern void fpsimd_save_and_flush_cpu_state(void);
 
 static inline bool thread_sm_enabled(struct thread_struct *thread)
@@ -108,6 +111,8 @@ static inline bool thread_za_enabled(struct thread_struct *thread)
 	return system_supports_sme() && (thread->svcr & SVCR_ZA_MASK);
 }
 
+extern void task_smstop_sm(struct task_struct *task);
+
 /* Maximum VL that SVE/SME VL-agnostic software can transparently support */
 #define VL_ARCH_MAX 0x100
 
@@ -195,10 +200,8 @@ struct vl_info {
 
 extern void sve_alloc(struct task_struct *task, bool flush);
 extern void fpsimd_release_task(struct task_struct *task);
-extern void fpsimd_sync_to_sve(struct task_struct *task);
-extern void fpsimd_force_sync_to_sve(struct task_struct *task);
-extern void sve_sync_to_fpsimd(struct task_struct *task);
-extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
+extern void fpsimd_sync_from_effective_state(struct task_struct *task);
+extern void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task);
 
 extern int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 				 unsigned long vl, unsigned long flags);
@@ -292,14 +295,29 @@ static inline bool sve_vq_available(unsigned int vq)
 	return vq_available(ARM64_VEC_SVE, vq);
 }
 
-size_t sve_state_size(struct task_struct const *task);
+static inline size_t __sve_state_size(unsigned int sve_vl, unsigned int sme_vl)
+{
+	unsigned int vl = max(sve_vl, sme_vl);
+	return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+}
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+static inline size_t sve_state_size(struct task_struct const *task)
+{
+	unsigned int sve_vl = task_get_sve_vl(task);
+	unsigned int sme_vl = task_get_sme_vl(task);
+	return __sve_state_size(sve_vl, sme_vl);
+}
 
 #else /* ! CONFIG_ARM64_SVE */
 
 static inline void sve_alloc(struct task_struct *task, bool flush) { }
 static inline void fpsimd_release_task(struct task_struct *task) { }
-static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
-static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+static inline void fpsimd_sync_from_effective_state(struct task_struct *task) { }
+static inline void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task) { }
 
 static inline int sve_max_virtualisable_vl(void)
 {
@@ -333,6 +351,11 @@ static inline void vec_update_vq_map(enum vec_type t) { }
 static inline int vec_verify_vq_map(enum vec_type t) { return 0; }
 static inline void sve_setup(void) { }
 
+static inline size_t __sve_state_size(unsigned int sve_vl, unsigned int sme_vl)
+{
+	return 0;
+}
+
 static inline size_t sve_state_size(struct task_struct const *task)
 {
 	return 0;
@@ -385,6 +408,16 @@ extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
 extern void sme_suspend_exit(void);
 
+static inline size_t __sme_state_size(unsigned int sme_vl)
+{
+	size_t size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(sme_vl));
+
+	if (system_supports_sme2())
+		size += ZT_SIG_REG_SIZE;
+
+	return size;
+}
+
 /*
  * Return how many bytes of memory are required to store the full SME
  * specific state for task, given task's currently configured vector
@@ -392,15 +425,7 @@ extern void sme_suspend_exit(void);
  */
 static inline size_t sme_state_size(struct task_struct const *task)
 {
-	unsigned int vl = task_get_sme_vl(task);
-	size_t size;
-
-	size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(vl));
-
-	if (system_supports_sme2())
-		size += ZT_SIG_REG_SIZE;
-
-	return size;
+	return __sme_state_size(task_get_sme_vl(task));
 }
 
 #else
@@ -421,6 +446,11 @@ static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
 static inline void sme_suspend_exit(void) { }
 
+static inline size_t __sme_state_size(unsigned int sme_vl)
+{
+	return 0;
+}
+
 static inline size_t sme_state_size(struct task_struct const *task)
 {
 	return 0;
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/hardirq.h linux-libre-6.16-gnu/arch/arm64/include/asm/hardirq.h
index cbfa7b6f2e09..77d6b8c63d4e 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/hardirq.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/hardirq.h
@@ -41,7 +41,7 @@ do {									\
 									\
 	___hcr = read_sysreg(hcr_el2);					\
 	if (!(___hcr & HCR_TGE)) {					\
-		write_sysreg(___hcr | HCR_TGE, hcr_el2);		\
+		write_sysreg_hcr(___hcr | HCR_TGE);			\
 		isb();							\
 	}								\
 	/*								\
@@ -82,7 +82,7 @@ do {									\
 	 */								\
 	barrier();							\
 	if (!___ctx->cnt && !(___hcr & HCR_TGE))			\
-		write_sysreg(___hcr, hcr_el2);				\
+		write_sysreg_hcr(___hcr);				\
 } while (0)
 
 static inline void ack_bad_irq(unsigned int irq)
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/hugetlb.h linux-libre-6.16-gnu/arch/arm64/include/asm/hugetlb.h
index 07fbf5bf85a7..2a8155c4a882 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/hugetlb.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/hugetlb.h
@@ -69,29 +69,38 @@ extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
 
 #include <asm-generic/hugetlb.h>
 
-#define __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE
-static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
-					   unsigned long start,
-					   unsigned long end)
+static inline void __flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+					     unsigned long start,
+					     unsigned long end,
+					     unsigned long stride,
+					     bool last_level)
 {
-	unsigned long stride = huge_page_size(hstate_vma(vma));
-
 	switch (stride) {
 #ifndef __PAGETABLE_PMD_FOLDED
 	case PUD_SIZE:
-		__flush_tlb_range(vma, start, end, PUD_SIZE, false, 1);
+		__flush_tlb_range(vma, start, end, PUD_SIZE, last_level, 1);
 		break;
 #endif
 	case CONT_PMD_SIZE:
 	case PMD_SIZE:
-		__flush_tlb_range(vma, start, end, PMD_SIZE, false, 2);
+		__flush_tlb_range(vma, start, end, PMD_SIZE, last_level, 2);
 		break;
 	case CONT_PTE_SIZE:
-		__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 3);
+		__flush_tlb_range(vma, start, end, PAGE_SIZE, last_level, 3);
 		break;
 	default:
-		__flush_tlb_range(vma, start, end, PAGE_SIZE, false, TLBI_TTL_UNKNOWN);
+		__flush_tlb_range(vma, start, end, PAGE_SIZE, last_level, TLBI_TTL_UNKNOWN);
 	}
 }
 
+#define __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE
+static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+					   unsigned long start,
+					   unsigned long end)
+{
+	unsigned long stride = huge_page_size(hstate_vma(vma));
+
+	__flush_hugetlb_tlb_range(vma, start, end, stride, false);
+}
+
 #endif /* __ASM_HUGETLB_H */
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kernel-pgtable.h linux-libre-6.16-gnu/arch/arm64/include/asm/kernel-pgtable.h
index 9e93733523f6..74a4f738c5f5 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kernel-pgtable.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kernel-pgtable.h
@@ -58,7 +58,7 @@
 #define INIT_DIR_SIZE (PAGE_SIZE * (EARLY_PAGES(SWAPPER_PGTABLE_LEVELS, KIMAGE_VADDR, _end, EXTRA_PAGE) \
 				    + EARLY_SEGMENT_EXTRA_PAGES))
 
-#define INIT_IDMAP_DIR_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, KIMAGE_VADDR, _end, 1))
+#define INIT_IDMAP_DIR_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, KIMAGE_VADDR, kimage_limit, 1))
 #define INIT_IDMAP_DIR_SIZE	((INIT_IDMAP_DIR_PAGES + EARLY_IDMAP_EXTRA_PAGES) * PAGE_SIZE)
 
 #define INIT_IDMAP_FDT_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, 0UL, UL(MAX_FDT_SIZE), 1) - 1)
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_arm.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_arm.h
index e9c8a581e16f..1da290aeedce 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_arm.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_arm.h
@@ -12,67 +12,70 @@
 #include <asm/sysreg.h>
 #include <asm/types.h>
 
-/* Hyp Configuration Register (HCR) bits */
-
-#define HCR_TID5	(UL(1) << 58)
-#define HCR_DCT		(UL(1) << 57)
-#define HCR_ATA_SHIFT	56
-#define HCR_ATA		(UL(1) << HCR_ATA_SHIFT)
-#define HCR_TTLBOS	(UL(1) << 55)
-#define HCR_TTLBIS	(UL(1) << 54)
-#define HCR_ENSCXT	(UL(1) << 53)
-#define HCR_TOCU	(UL(1) << 52)
-#define HCR_AMVOFFEN	(UL(1) << 51)
-#define HCR_TICAB	(UL(1) << 50)
-#define HCR_TID4	(UL(1) << 49)
-#define HCR_FIEN	(UL(1) << 47)
-#define HCR_FWB		(UL(1) << 46)
-#define HCR_NV2		(UL(1) << 45)
-#define HCR_AT		(UL(1) << 44)
-#define HCR_NV1		(UL(1) << 43)
-#define HCR_NV		(UL(1) << 42)
-#define HCR_API		(UL(1) << 41)
-#define HCR_APK		(UL(1) << 40)
-#define HCR_TEA		(UL(1) << 37)
-#define HCR_TERR	(UL(1) << 36)
-#define HCR_TLOR	(UL(1) << 35)
-#define HCR_E2H		(UL(1) << 34)
-#define HCR_ID		(UL(1) << 33)
-#define HCR_CD		(UL(1) << 32)
-#define HCR_RW_SHIFT	31
-#define HCR_RW		(UL(1) << HCR_RW_SHIFT)
-#define HCR_TRVM	(UL(1) << 30)
-#define HCR_HCD		(UL(1) << 29)
-#define HCR_TDZ		(UL(1) << 28)
-#define HCR_TGE		(UL(1) << 27)
-#define HCR_TVM		(UL(1) << 26)
-#define HCR_TTLB	(UL(1) << 25)
-#define HCR_TPU		(UL(1) << 24)
-#define HCR_TPC		(UL(1) << 23) /* HCR_TPCP if FEAT_DPB */
-#define HCR_TSW		(UL(1) << 22)
-#define HCR_TACR	(UL(1) << 21)
-#define HCR_TIDCP	(UL(1) << 20)
-#define HCR_TSC		(UL(1) << 19)
-#define HCR_TID3	(UL(1) << 18)
-#define HCR_TID2	(UL(1) << 17)
-#define HCR_TID1	(UL(1) << 16)
-#define HCR_TID0	(UL(1) << 15)
-#define HCR_TWE		(UL(1) << 14)
-#define HCR_TWI		(UL(1) << 13)
-#define HCR_DC		(UL(1) << 12)
-#define HCR_BSU		(3 << 10)
-#define HCR_BSU_IS	(UL(1) << 10)
-#define HCR_FB		(UL(1) << 9)
-#define HCR_VSE		(UL(1) << 8)
-#define HCR_VI		(UL(1) << 7)
-#define HCR_VF		(UL(1) << 6)
-#define HCR_AMO		(UL(1) << 5)
-#define HCR_IMO		(UL(1) << 4)
-#define HCR_FMO		(UL(1) << 3)
-#define HCR_PTW		(UL(1) << 2)
-#define HCR_SWIO	(UL(1) << 1)
-#define HCR_VM		(UL(1) << 0)
-#define HCR_RES0	((UL(1) << 48) | (UL(1) << 39))
+/*
+ * Because I'm terribly lazy and that repainting the whole of the KVM
+ * code with the proper names is a pain, use a helper to map the names
+ * inherited from AArch32 with the new fancy nomenclature. One day...
+ */
+#define	__HCR(x)	HCR_EL2_##x
+
+#define HCR_TID5	__HCR(TID5)
+#define HCR_DCT		__HCR(DCT)
+#define HCR_ATA_SHIFT	__HCR(ATA_SHIFT)
+#define HCR_ATA		__HCR(ATA)
+#define HCR_TTLBOS	__HCR(TTLBOS)
+#define HCR_TTLBIS	__HCR(TTLBIS)
+#define HCR_ENSCXT	__HCR(EnSCXT)
+#define HCR_TOCU	__HCR(TOCU)
+#define HCR_AMVOFFEN	__HCR(AMVOFFEN)
+#define HCR_TICAB	__HCR(TICAB)
+#define HCR_TID4	__HCR(TID4)
+#define HCR_FIEN	__HCR(FIEN)
+#define HCR_FWB		__HCR(FWB)
+#define HCR_NV2		__HCR(NV2)
+#define HCR_AT		__HCR(AT)
+#define HCR_NV1		__HCR(NV1)
+#define HCR_NV		__HCR(NV)
+#define HCR_API		__HCR(API)
+#define HCR_APK		__HCR(APK)
+#define HCR_TEA		__HCR(TEA)
+#define HCR_TERR	__HCR(TERR)
+#define HCR_TLOR	__HCR(TLOR)
+#define HCR_E2H		__HCR(E2H)
+#define HCR_ID		__HCR(ID)
+#define HCR_CD		__HCR(CD)
+#define HCR_RW		__HCR(RW)
+#define HCR_TRVM	__HCR(TRVM)
+#define HCR_HCD		__HCR(HCD)
+#define HCR_TDZ		__HCR(TDZ)
+#define HCR_TGE		__HCR(TGE)
+#define HCR_TVM		__HCR(TVM)
+#define HCR_TTLB	__HCR(TTLB)
+#define HCR_TPU		__HCR(TPU)
+#define HCR_TPC		__HCR(TPCP)
+#define HCR_TSW		__HCR(TSW)
+#define HCR_TACR	__HCR(TACR)
+#define HCR_TIDCP	__HCR(TIDCP)
+#define HCR_TSC		__HCR(TSC)
+#define HCR_TID3	__HCR(TID3)
+#define HCR_TID2	__HCR(TID2)
+#define HCR_TID1	__HCR(TID1)
+#define HCR_TID0	__HCR(TID0)
+#define HCR_TWE		__HCR(TWE)
+#define HCR_TWI		__HCR(TWI)
+#define HCR_DC		__HCR(DC)
+#define HCR_BSU		__HCR(BSU)
+#define HCR_BSU_IS	__HCR(BSU_IS)
+#define HCR_FB		__HCR(FB)
+#define HCR_VSE		__HCR(VSE)
+#define HCR_VI		__HCR(VI)
+#define HCR_VF		__HCR(VF)
+#define HCR_AMO		__HCR(AMO)
+#define HCR_IMO		__HCR(IMO)
+#define HCR_FMO		__HCR(FMO)
+#define HCR_PTW		__HCR(PTW)
+#define HCR_SWIO	__HCR(SWIO)
+#define HCR_VM		__HCR(VM)
 
 /*
  * The bits we set in HCR:
@@ -312,56 +315,19 @@
 				 GENMASK(15, 0))
 
 /*
- * FGT register definitions
- *
- * RES0 and polarity masks as of DDI0487J.a, to be updated as needed.
- * We're not using the generated masks as they are usually ahead of
- * the published ARM ARM, which we use as a reference.
- *
- * Once we get to a point where the two describe the same thing, we'll
- * merge the definitions. One day.
- */
-#define __HFGRTR_EL2_RES0	HFGxTR_EL2_RES0
-#define __HFGRTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGRTR_EL2_nMASK	~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK)
-
-/*
- * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any
- * future additions, define __HFGWTR* macros relative to __HFGRTR* ones.
+ * Polarity masks for HCRX_EL2, limited to the bits that we know about
+ * at this point in time. It doesn't mean that we actually *handle*
+ * them, but that at least those that are not advertised to a guest
+ * will be RES0 for that guest.
  */
-#define __HFGRTR_ONLY_MASK	(BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
-				 GENMASK(26, 25) | BIT(21) | BIT(18) | \
-				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
-#define __HFGWTR_EL2_RES0	(__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK)
-#define __HFGWTR_EL2_MASK	(__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK)
-#define __HFGWTR_EL2_nMASK	~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK)
-
-#define __HFGITR_EL2_RES0	HFGITR_EL2_RES0
-#define __HFGITR_EL2_MASK	(BIT(62) | BIT(60) | GENMASK(54, 0))
-#define __HFGITR_EL2_nMASK	~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK)
-
-#define __HDFGRTR_EL2_RES0	HDFGRTR_EL2_RES0
-#define __HDFGRTR_EL2_MASK	(BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \
-				 GENMASK(41, 40) | GENMASK(37, 22) | \
-				 GENMASK(19, 9) | GENMASK(7, 0))
-#define __HDFGRTR_EL2_nMASK	~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK)
-
-#define __HDFGWTR_EL2_RES0	HDFGWTR_EL2_RES0
-#define __HDFGWTR_EL2_MASK	(GENMASK(57, 52) | GENMASK(50, 48) | \
-				 GENMASK(46, 44) | GENMASK(42, 41) | \
-				 GENMASK(37, 35) | GENMASK(33, 31) | \
-				 GENMASK(29, 23) | GENMASK(21, 10) | \
-				 GENMASK(8, 7) | GENMASK(5, 0))
-#define __HDFGWTR_EL2_nMASK	~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK)
-
-#define __HAFGRTR_EL2_RES0	HAFGRTR_EL2_RES0
-#define __HAFGRTR_EL2_MASK	(GENMASK(49, 17) | GENMASK(4, 0))
-#define __HAFGRTR_EL2_nMASK	~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK)
-
-/* Similar definitions for HCRX_EL2 */
-#define __HCRX_EL2_RES0         HCRX_EL2_RES0
-#define __HCRX_EL2_MASK		(BIT(6))
-#define __HCRX_EL2_nMASK	~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK)
+#define __HCRX_EL2_MASK		(BIT_ULL(6))
+#define __HCRX_EL2_nMASK	(GENMASK_ULL(24, 14) | \
+				 GENMASK_ULL(11, 7)  | \
+				 GENMASK_ULL(5, 0))
+#define __HCRX_EL2_RES0		~(__HCRX_EL2_nMASK | __HCRX_EL2_MASK)
+#define __HCRX_EL2_RES1		~(__HCRX_EL2_nMASK | \
+				  __HCRX_EL2_MASK  | \
+				  __HCRX_EL2_RES0)
 
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_emulate.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_emulate.h
index bd020fc28aa9..0720898f563e 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_emulate.h
@@ -561,68 +561,6 @@ static __always_inline void kvm_incr_pc(struct kvm_vcpu *vcpu)
 		vcpu_set_flag((v), e);					\
 	} while (0)
 
-#define __build_check_all_or_none(r, bits)				\
-	BUILD_BUG_ON(((r) & (bits)) && ((r) & (bits)) != (bits))
-
-#define __cpacr_to_cptr_clr(clr, set)					\
-	({								\
-		u64 cptr = 0;						\
-									\
-		if ((set) & CPACR_EL1_FPEN)				\
-			cptr |= CPTR_EL2_TFP;				\
-		if ((set) & CPACR_EL1_ZEN)				\
-			cptr |= CPTR_EL2_TZ;				\
-		if ((set) & CPACR_EL1_SMEN)				\
-			cptr |= CPTR_EL2_TSM;				\
-		if ((clr) & CPACR_EL1_TTA)				\
-			cptr |= CPTR_EL2_TTA;				\
-		if ((clr) & CPTR_EL2_TAM)				\
-			cptr |= CPTR_EL2_TAM;				\
-		if ((clr) & CPTR_EL2_TCPAC)				\
-			cptr |= CPTR_EL2_TCPAC;				\
-									\
-		cptr;							\
-	})
-
-#define __cpacr_to_cptr_set(clr, set)					\
-	({								\
-		u64 cptr = 0;						\
-									\
-		if ((clr) & CPACR_EL1_FPEN)				\
-			cptr |= CPTR_EL2_TFP;				\
-		if ((clr) & CPACR_EL1_ZEN)				\
-			cptr |= CPTR_EL2_TZ;				\
-		if ((clr) & CPACR_EL1_SMEN)				\
-			cptr |= CPTR_EL2_TSM;				\
-		if ((set) & CPACR_EL1_TTA)				\
-			cptr |= CPTR_EL2_TTA;				\
-		if ((set) & CPTR_EL2_TAM)				\
-			cptr |= CPTR_EL2_TAM;				\
-		if ((set) & CPTR_EL2_TCPAC)				\
-			cptr |= CPTR_EL2_TCPAC;				\
-									\
-		cptr;							\
-	})
-
-#define cpacr_clear_set(clr, set)					\
-	do {								\
-		BUILD_BUG_ON((set) & CPTR_VHE_EL2_RES0);		\
-		BUILD_BUG_ON((clr) & CPACR_EL1_E0POE);			\
-		__build_check_all_or_none((clr), CPACR_EL1_FPEN);	\
-		__build_check_all_or_none((set), CPACR_EL1_FPEN);	\
-		__build_check_all_or_none((clr), CPACR_EL1_ZEN);	\
-		__build_check_all_or_none((set), CPACR_EL1_ZEN);	\
-		__build_check_all_or_none((clr), CPACR_EL1_SMEN);	\
-		__build_check_all_or_none((set), CPACR_EL1_SMEN);	\
-									\
-		if (has_vhe() || has_hvhe())				\
-			sysreg_clear_set(cpacr_el1, clr, set);		\
-		else							\
-			sysreg_clear_set(cptr_el2,			\
-					 __cpacr_to_cptr_clr(clr, set),	\
-					 __cpacr_to_cptr_set(clr, set));\
-	} while (0)
-
 /*
  * Returns a 'sanitised' view of CPTR_EL2, translating from nVHE to the VHE
  * format if E2H isn't set.
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_host.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_host.h
index 08ba91e6fb03..3e41a880b062 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_host.h
@@ -39,7 +39,7 @@
 
 #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
 
-#define KVM_VCPU_MAX_FEATURES 7
+#define KVM_VCPU_MAX_FEATURES 9
 #define KVM_VCPU_VALID_FEATURES	(BIT(KVM_VCPU_MAX_FEATURES) - 1)
 
 #define KVM_REQ_SLEEP \
@@ -53,6 +53,7 @@
 #define KVM_REQ_RESYNC_PMU_EL0		KVM_ARCH_REQ(7)
 #define KVM_REQ_NESTED_S2_UNMAP		KVM_ARCH_REQ(8)
 #define KVM_REQ_GUEST_HYP_IRQ_PENDING	KVM_ARCH_REQ(9)
+#define KVM_REQ_MAP_L1_VNCR_EL2		KVM_ARCH_REQ(10)
 
 #define KVM_DIRTY_LOG_MANUAL_CAPS   (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \
 				     KVM_DIRTY_LOG_INITIALLY_SET)
@@ -273,11 +274,17 @@ struct kvm_sysreg_masks;
 
 enum fgt_group_id {
 	__NO_FGT_GROUP__,
-	HFGxTR_GROUP,
+	HFGRTR_GROUP,
+	HFGWTR_GROUP = HFGRTR_GROUP,
 	HDFGRTR_GROUP,
 	HDFGWTR_GROUP = HDFGRTR_GROUP,
 	HFGITR_GROUP,
 	HAFGRTR_GROUP,
+	HFGRTR2_GROUP,
+	HFGWTR2_GROUP = HFGRTR2_GROUP,
+	HDFGRTR2_GROUP,
+	HDFGWTR2_GROUP = HDFGRTR2_GROUP,
+	HFGITR2_GROUP,
 
 	/* Must be last */
 	__NR_FGT_GROUP_IDS__
@@ -359,8 +366,8 @@ struct kvm_arch {
 
 	cpumask_var_t supported_cpus;
 
-	/* PMCR_EL0.N value for the guest */
-	u8 pmcr_n;
+	/* Maximum number of counters for the guest */
+	u8 nr_pmu_counters;
 
 	/* Iterator for idreg debugfs */
 	u8	idreg_debugfs_iter;
@@ -389,6 +396,9 @@ struct kvm_arch {
 	/* Masks for VNCR-backed and general EL2 sysregs */
 	struct kvm_sysreg_masks	*sysreg_masks;
 
+	/* Count the number of VNCR_EL2 currently mapped */
+	atomic_t vncr_map_count;
+
 	/*
 	 * For an untrusted host VM, 'pkvm.handle' is used to lookup
 	 * the associated pKVM instance in the hypervisor.
@@ -561,6 +571,13 @@ enum vcpu_sysreg {
 	VNCR(HDFGRTR_EL2),
 	VNCR(HDFGWTR_EL2),
 	VNCR(HAFGRTR_EL2),
+	VNCR(HFGRTR2_EL2),
+	VNCR(HFGWTR2_EL2),
+	VNCR(HFGITR2_EL2),
+	VNCR(HDFGRTR2_EL2),
+	VNCR(HDFGWTR2_EL2),
+
+	VNCR(VNCR_EL2),
 
 	VNCR(CNTVOFF_EL2),
 	VNCR(CNTV_CVAL_EL0),
@@ -606,6 +623,37 @@ struct kvm_sysreg_masks {
 	} mask[NR_SYS_REGS - __SANITISED_REG_START__];
 };
 
+struct fgt_masks {
+	const char	*str;
+	u64		mask;
+	u64		nmask;
+	u64		res0;
+};
+
+extern struct fgt_masks hfgrtr_masks;
+extern struct fgt_masks hfgwtr_masks;
+extern struct fgt_masks hfgitr_masks;
+extern struct fgt_masks hdfgrtr_masks;
+extern struct fgt_masks hdfgwtr_masks;
+extern struct fgt_masks hafgrtr_masks;
+extern struct fgt_masks hfgrtr2_masks;
+extern struct fgt_masks hfgwtr2_masks;
+extern struct fgt_masks hfgitr2_masks;
+extern struct fgt_masks hdfgrtr2_masks;
+extern struct fgt_masks hdfgwtr2_masks;
+
+extern struct fgt_masks kvm_nvhe_sym(hfgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgwtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgitr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgwtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hafgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgrtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgwtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgitr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgrtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgwtr2_masks);
+
 struct kvm_cpu_context {
 	struct user_pt_regs regs;	/* sp = sp_el0 */
 
@@ -654,6 +702,8 @@ struct kvm_host_data {
 #define KVM_HOST_DATA_FLAG_HAS_TRBE			1
 #define KVM_HOST_DATA_FLAG_TRBE_ENABLED			4
 #define KVM_HOST_DATA_FLAG_EL1_TRACING_CONFIGURED	5
+#define KVM_HOST_DATA_FLAG_VCPU_IN_HYP_CONTEXT		6
+#define KVM_HOST_DATA_FLAG_L1_VNCR_MAPPED		7
 	unsigned long flags;
 
 	struct kvm_cpu_context host_ctxt;
@@ -730,6 +780,8 @@ struct vcpu_reset_state {
 	bool		reset;
 };
 
+struct vncr_tlb;
+
 struct kvm_vcpu_arch {
 	struct kvm_cpu_context ctxt;
 
@@ -824,6 +876,9 @@ struct kvm_vcpu_arch {
 
 	/* Per-vcpu CCSIDR override or NULL */
 	u32 *ccsidr;
+
+	/* Per-vcpu TLB for VNCR_EL2 -- NULL when !NV */
+	struct vncr_tlb	*vncr_tlb;
 };
 
 /*
@@ -971,20 +1026,22 @@ struct kvm_vcpu_arch {
 #define vcpu_sve_zcr_elx(vcpu)						\
 	(unlikely(is_hyp_ctxt(vcpu)) ? ZCR_EL2 : ZCR_EL1)
 
-#define vcpu_sve_state_size(vcpu) ({					\
+#define sve_state_size_from_vl(sve_max_vl) ({				\
 	size_t __size_ret;						\
-	unsigned int __vcpu_vq;						\
+	unsigned int __vq;						\
 									\
-	if (WARN_ON(!sve_vl_valid((vcpu)->arch.sve_max_vl))) {		\
+	if (WARN_ON(!sve_vl_valid(sve_max_vl))) {			\
 		__size_ret = 0;						\
 	} else {							\
-		__vcpu_vq = vcpu_sve_max_vq(vcpu);			\
-		__size_ret = SVE_SIG_REGS_SIZE(__vcpu_vq);		\
+		__vq = sve_vq_from_vl(sve_max_vl);			\
+		__size_ret = SVE_SIG_REGS_SIZE(__vq);			\
 	}								\
 									\
 	__size_ret;							\
 })
 
+#define vcpu_sve_state_size(vcpu) sve_state_size_from_vl((vcpu)->arch.sve_max_vl)
+
 #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
 				 KVM_GUESTDBG_USE_SW_BP | \
 				 KVM_GUESTDBG_USE_HW | \
@@ -1050,14 +1107,36 @@ static inline u64 *___ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r)
 #define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
 
 u64 kvm_vcpu_apply_reg_masks(const struct kvm_vcpu *, enum vcpu_sysreg, u64);
+
+#define __vcpu_assign_sys_reg(v, r, val)				\
+	do {								\
+		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
+		u64 __v = (val);					\
+		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+									\
+		ctxt_sys_reg(ctxt, (r)) = __v;				\
+	} while (0)
+
+#define __vcpu_rmw_sys_reg(v, r, op, val)				\
+	do {								\
+		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
+		u64 __v = ctxt_sys_reg(ctxt, (r));			\
+		__v op (val);						\
+		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+									\
+		ctxt_sys_reg(ctxt, (r)) = __v;				\
+	} while (0)
+
 #define __vcpu_sys_reg(v,r)						\
-	(*({								\
+	({								\
 		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
-		u64 *__r = __ctxt_sys_reg(ctxt, (r));			\
+		u64 __v = ctxt_sys_reg(ctxt, (r));			\
 		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
-			*__r = kvm_vcpu_apply_reg_masks((v), (r), *__r);\
-		__r;							\
-	}))
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+		__v;							\
+	})
 
 u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg);
 void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg);
@@ -1210,9 +1289,8 @@ void kvm_arm_resume_guest(struct kvm *kvm);
 	})
 
 /*
- * The couple of isb() below are there to guarantee the same behaviour
- * on VHE as on !VHE, where the eret to EL1 acts as a context
- * synchronization event.
+ * The isb() below is there to guarantee the same behaviour on VHE as on !VHE,
+ * where the eret to EL1 acts as a context synchronization event.
  */
 #define kvm_call_hyp(f, ...)						\
 	do {								\
@@ -1230,7 +1308,6 @@ void kvm_arm_resume_guest(struct kvm *kvm);
 									\
 		if (has_vhe()) {					\
 			ret = f(__VA_ARGS__);				\
-			isb();						\
 		} else {						\
 			ret = kvm_call_hyp_nvhe(f, ##__VA_ARGS__);	\
 		}							\
@@ -1263,9 +1340,6 @@ int __init populate_sysreg_config(const struct sys_reg_desc *sr,
 				  unsigned int idx);
 int __init populate_nv_trap_config(void);
 
-bool lock_all_vcpus(struct kvm *kvm);
-void unlock_all_vcpus(struct kvm *kvm);
-
 void kvm_calculate_traps(struct kvm_vcpu *vcpu);
 
 /* MMIO helpers */
@@ -1406,7 +1480,6 @@ int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm,
 					struct reg_mask_range *range);
 
 /* Guest/host FPSIMD coordination helpers */
-int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu);
@@ -1550,12 +1623,16 @@ void kvm_set_vm_id_reg(struct kvm *kvm, u32 reg, u64 val);
 	 kvm_cmp_feat_signed(kvm, id, fld, op, limit) :			\
 	 kvm_cmp_feat_unsigned(kvm, id, fld, op, limit))
 
-#define kvm_has_feat(kvm, id, fld, limit)				\
+#define __kvm_has_feat(kvm, id, fld, limit)				\
 	kvm_cmp_feat(kvm, id, fld, >=, limit)
 
-#define kvm_has_feat_enum(kvm, id, fld, val)				\
+#define kvm_has_feat(kvm, ...) __kvm_has_feat(kvm, __VA_ARGS__)
+
+#define __kvm_has_feat_enum(kvm, id, fld, val)				\
 	kvm_cmp_feat_unsigned(kvm, id, fld, ==, val)
 
+#define kvm_has_feat_enum(kvm, ...) __kvm_has_feat_enum(kvm, __VA_ARGS__)
+
 #define kvm_has_feat_range(kvm, id, fld, min, max)			\
 	(kvm_cmp_feat(kvm, id, fld, >=, min) &&				\
 	kvm_cmp_feat(kvm, id, fld, <=, max))
@@ -1593,4 +1670,9 @@ static inline bool kvm_arch_has_irq_bypass(void)
 	return true;
 }
 
+void compute_fgu(struct kvm *kvm, enum fgt_group_id fgt);
+void get_reg_fixed_bits(struct kvm *kvm, enum vcpu_sysreg reg, u64 *res0, u64 *res1);
+void check_feature_map(void);
+
+
 #endif /* __ARM64_KVM_HOST_H__ */
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_nested.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_nested.h
index 692f403c1896..0bd07ea068a1 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_nested.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_nested.h
@@ -231,6 +231,38 @@ static inline u64 kvm_encode_nested_level(struct kvm_s2_trans *trans)
 		shift;							\
 	})
 
+static inline u64 decode_range_tlbi(u64 val, u64 *range, u16 *asid)
+{
+	u64 base, tg, num, scale;
+	int shift;
+
+	tg	= FIELD_GET(GENMASK(47, 46), val);
+
+	switch(tg) {
+	case 1:
+		shift = 12;
+		break;
+	case 2:
+		shift = 14;
+		break;
+	case 3:
+	default:		/* IMPDEF: handle tg==0 as 64k */
+		shift = 16;
+		break;
+	}
+
+	base	= (val & GENMASK(36, 0)) << shift;
+
+	if (asid)
+		*asid = FIELD_GET(TLBIR_ASID_MASK, val);
+
+	scale	= FIELD_GET(GENMASK(45, 44), val);
+	num	= FIELD_GET(GENMASK(43, 39), val);
+	*range	= __TLBI_RANGE_PAGES(num, scale) << shift;
+
+	return base;
+}
+
 static inline unsigned int ps_to_output_size(unsigned int ps)
 {
 	switch (ps) {
@@ -245,4 +277,72 @@ static inline unsigned int ps_to_output_size(unsigned int ps)
 	}
 }
 
+enum trans_regime {
+	TR_EL10,
+	TR_EL20,
+	TR_EL2,
+};
+
+struct s1_walk_info {
+	u64	     		baddr;
+	enum trans_regime	regime;
+	unsigned int		max_oa_bits;
+	unsigned int		pgshift;
+	unsigned int		txsz;
+	int 	     		sl;
+	bool			as_el0;
+	bool	     		hpd;
+	bool			e0poe;
+	bool			poe;
+	bool			pan;
+	bool	     		be;
+	bool	     		s2;
+};
+
+struct s1_walk_result {
+	union {
+		struct {
+			u64	desc;
+			u64	pa;
+			s8	level;
+			u8	APTable;
+			bool	nG;
+			u16	asid;
+			bool	UXNTable;
+			bool	PXNTable;
+			bool	uwxn;
+			bool	uov;
+			bool	ur;
+			bool	uw;
+			bool	ux;
+			bool	pwxn;
+			bool	pov;
+			bool	pr;
+			bool	pw;
+			bool	px;
+		};
+		struct {
+			u8	fst;
+			bool	ptw;
+			bool	s2;
+		};
+	};
+	bool	failed;
+};
+
+int __kvm_translate_va(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
+		       struct s1_walk_result *wr, u64 va);
+
+/* VNCR management */
+int kvm_vcpu_allocate_vncr_tlb(struct kvm_vcpu *vcpu);
+int kvm_handle_vncr_abort(struct kvm_vcpu *vcpu);
+void kvm_handle_s1e2_tlbi(struct kvm_vcpu *vcpu, u32 inst, u64 val);
+
+#define vncr_fixmap(c)						\
+	({							\
+		u32 __c = (c);					\
+		BUG_ON(__c >= NR_CPUS);				\
+		(FIX_VNCR - __c);				\
+	})
+
 #endif /* __ARM64_KVM_NESTED_H */
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_pgtable.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_pgtable.h
index 6b9d274052c7..2888b5d03757 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_pgtable.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_pgtable.h
@@ -59,6 +59,11 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PHYS_INVALID		(-1ULL)
 
+#define KVM_PTE_TYPE			BIT(1)
+#define KVM_PTE_TYPE_BLOCK		0
+#define KVM_PTE_TYPE_PAGE		1
+#define KVM_PTE_TYPE_TABLE		1
+
 #define KVM_PTE_LEAF_ATTR_LO		GENMASK(11, 2)
 
 #define KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX	GENMASK(4, 2)
@@ -413,7 +418,7 @@ static inline bool kvm_pgtable_walk_lock_held(void)
  */
 struct kvm_pgtable {
 	union {
-		struct rb_root					pkvm_mappings;
+		struct rb_root_cached				pkvm_mappings;
 		struct {
 			u32					ia_bits;
 			s8					start_level;
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_pkvm.h linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_pkvm.h
index abd693ce5b93..ea58282f59bb 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/kvm_pkvm.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/kvm_pkvm.h
@@ -135,6 +135,12 @@ static inline unsigned long host_s2_pgtable_pages(void)
 	return res;
 }
 
+#ifdef CONFIG_NVHE_EL2_DEBUG
+static inline unsigned long pkvm_selftest_pages(void) { return 32; }
+#else
+static inline unsigned long pkvm_selftest_pages(void) { return 0; }
+#endif
+
 #define KVM_FFA_MBOX_NR_PAGES	1
 
 static inline unsigned long hyp_ffa_proxy_pages(void)
@@ -167,6 +173,8 @@ struct pkvm_mapping {
 	struct rb_node node;
 	u64 gfn;
 	u64 pfn;
+	u64 nr_pages;
+	u64 __subtree_last;	/* Internal member for interval tree */
 };
 
 int pkvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/mem_encrypt.h linux-libre-6.16-gnu/arch/arm64/include/asm/mem_encrypt.h
index a2a1eeb36d4b..314b2b52025f 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/mem_encrypt.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/mem_encrypt.h
@@ -4,6 +4,8 @@
 
 #include <asm/rsi.h>
 
+struct device;
+
 struct arm64_mem_crypt_ops {
 	int (*encrypt)(unsigned long addr, int numpages);
 	int (*decrypt)(unsigned long addr, int numpages);
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/pgtable-types.h linux-libre-6.16-gnu/arch/arm64/include/asm/pgtable-types.h
index 6d6d4065b0cb..265e8301d7ba 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/pgtable-types.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/pgtable-types.h
@@ -11,11 +11,19 @@
 
 #include <asm/types.h>
 
-typedef u64 pteval_t;
-typedef u64 pmdval_t;
-typedef u64 pudval_t;
-typedef u64 p4dval_t;
-typedef u64 pgdval_t;
+/*
+ * Page Table Descriptor
+ *
+ * Generic page table descriptor format from which
+ * all level specific descriptors can be derived.
+ */
+typedef u64 ptdesc_t;
+
+typedef ptdesc_t pteval_t;
+typedef ptdesc_t pmdval_t;
+typedef ptdesc_t pudval_t;
+typedef ptdesc_t p4dval_t;
+typedef ptdesc_t pgdval_t;
 
 /*
  * These are used to make use of C type-checking..
@@ -46,7 +54,7 @@ typedef struct { pgdval_t pgd; } pgd_t;
 #define pgd_val(x)	((x).pgd)
 #define __pgd(x)	((pgd_t) { (x) } )
 
-typedef struct { pteval_t pgprot; } pgprot_t;
+typedef struct { ptdesc_t pgprot; } pgprot_t;
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/pgtable.h linux-libre-6.16-gnu/arch/arm64/include/asm/pgtable.h
index d3b538be1500..192d86e1cc76 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/pgtable.h
@@ -40,6 +40,85 @@
 #include <linux/sched.h>
 #include <linux/page_table_check.h>
 
+static inline void emit_pte_barriers(void)
+{
+	/*
+	 * These barriers are emitted under certain conditions after a pte entry
+	 * was modified (see e.g. __set_pte_complete()). The dsb makes the store
+	 * visible to the table walker. The isb ensures that any previous
+	 * speculative "invalid translation" marker that is in the CPU's
+	 * pipeline gets cleared, so that any access to that address after
+	 * setting the pte to valid won't cause a spurious fault. If the thread
+	 * gets preempted after storing to the pgtable but before emitting these
+	 * barriers, __switch_to() emits a dsb which ensure the walker gets to
+	 * see the store. There is no guarantee of an isb being issued though.
+	 * This is safe because it will still get issued (albeit on a
+	 * potentially different CPU) when the thread starts running again,
+	 * before any access to the address.
+	 */
+	dsb(ishst);
+	isb();
+}
+
+static inline void queue_pte_barriers(void)
+{
+	unsigned long flags;
+
+	if (in_interrupt()) {
+		emit_pte_barriers();
+		return;
+	}
+
+	flags = read_thread_flags();
+
+	if (flags & BIT(TIF_LAZY_MMU)) {
+		/* Avoid the atomic op if already set. */
+		if (!(flags & BIT(TIF_LAZY_MMU_PENDING)))
+			set_thread_flag(TIF_LAZY_MMU_PENDING);
+	} else {
+		emit_pte_barriers();
+	}
+}
+
+#define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	/*
+	 * lazy_mmu_mode is not supposed to permit nesting. But in practice this
+	 * does happen with CONFIG_DEBUG_PAGEALLOC, where a page allocation
+	 * inside a lazy_mmu_mode section (such as zap_pte_range()) will change
+	 * permissions on the linear map with apply_to_page_range(), which
+	 * re-enters lazy_mmu_mode. So we tolerate nesting in our
+	 * implementation. The first call to arch_leave_lazy_mmu_mode() will
+	 * flush and clear the flag such that the remainder of the work in the
+	 * outer nest behaves as if outside of lazy mmu mode. This is safe and
+	 * keeps tracking simple.
+	 */
+
+	if (in_interrupt())
+		return;
+
+	set_thread_flag(TIF_LAZY_MMU);
+}
+
+static inline void arch_flush_lazy_mmu_mode(void)
+{
+	if (in_interrupt())
+		return;
+
+	if (test_and_clear_thread_flag(TIF_LAZY_MMU_PENDING))
+		emit_pte_barriers();
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	if (in_interrupt())
+		return;
+
+	arch_flush_lazy_mmu_mode();
+	clear_thread_flag(TIF_LAZY_MMU);
+}
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 
@@ -320,18 +399,20 @@ static inline void __set_pte_nosync(pte_t *ptep, pte_t pte)
 	WRITE_ONCE(*ptep, pte);
 }
 
-static inline void __set_pte(pte_t *ptep, pte_t pte)
+static inline void __set_pte_complete(pte_t pte)
 {
-	__set_pte_nosync(ptep, pte);
-
 	/*
 	 * Only if the new pte is valid and kernel, otherwise TLB maintenance
-	 * or update_mmu_cache() have the necessary barriers.
+	 * has the necessary barriers.
 	 */
-	if (pte_valid_not_user(pte)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pte_valid_not_user(pte))
+		queue_pte_barriers();
+}
+
+static inline void __set_pte(pte_t *ptep, pte_t pte)
+{
+	__set_pte_nosync(ptep, pte);
+	__set_pte_complete(pte);
 }
 
 static inline pte_t __ptep_get(pte_t *ptep)
@@ -423,23 +504,6 @@ static inline pte_t pte_advance_pfn(pte_t pte, unsigned long nr)
 	return pfn_pte(pte_pfn(pte) + nr, pte_pgprot(pte));
 }
 
-static inline void __set_ptes(struct mm_struct *mm,
-			      unsigned long __always_unused addr,
-			      pte_t *ptep, pte_t pte, unsigned int nr)
-{
-	page_table_check_ptes_set(mm, ptep, pte, nr);
-	__sync_cache_and_tags(pte, nr);
-
-	for (;;) {
-		__check_safe_pte_update(mm, ptep, pte);
-		__set_pte(ptep, pte);
-		if (--nr == 0)
-			break;
-		ptep++;
-		pte = pte_advance_pfn(pte, 1);
-	}
-}
-
 /*
  * Hugetlb definitions.
  */
@@ -499,7 +563,7 @@ static inline pte_t pte_swp_mkexclusive(pte_t pte)
 	return set_pte_bit(pte, __pgprot(PTE_SWP_EXCLUSIVE));
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & PTE_SWP_EXCLUSIVE;
 }
@@ -609,7 +673,6 @@ static inline pmd_t pmd_mkspecial(pmd_t pmd)
 #define __phys_to_pmd_val(phys)	__phys_to_pte_val(phys)
 #define pmd_pfn(pmd)		((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(__phys_to_pmd_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #define pud_young(pud)		pte_young(pud_pte(pud))
 #define pud_mkyoung(pud)	pte_pud(pte_mkyoung(pud_pte(pud)))
@@ -649,30 +712,64 @@ static inline pgprot_t pud_pgprot(pud_t pud)
 	return __pgprot(pud_val(pfn_pud(pfn, __pgprot(0))) ^ pud_val(pud));
 }
 
-static inline void __set_pte_at(struct mm_struct *mm,
-				unsigned long __always_unused addr,
-				pte_t *ptep, pte_t pte, unsigned int nr)
+static inline void __set_ptes_anysz(struct mm_struct *mm, pte_t *ptep,
+				    pte_t pte, unsigned int nr,
+				    unsigned long pgsize)
+{
+	unsigned long stride = pgsize >> PAGE_SHIFT;
+
+	switch (pgsize) {
+	case PAGE_SIZE:
+		page_table_check_ptes_set(mm, ptep, pte, nr);
+		break;
+	case PMD_SIZE:
+		page_table_check_pmds_set(mm, (pmd_t *)ptep, pte_pmd(pte), nr);
+		break;
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		page_table_check_puds_set(mm, (pud_t *)ptep, pte_pud(pte), nr);
+		break;
+#endif
+	default:
+		VM_WARN_ON(1);
+	}
+
+	__sync_cache_and_tags(pte, nr * stride);
+
+	for (;;) {
+		__check_safe_pte_update(mm, ptep, pte);
+		__set_pte_nosync(ptep, pte);
+		if (--nr == 0)
+			break;
+		ptep++;
+		pte = pte_advance_pfn(pte, stride);
+	}
+
+	__set_pte_complete(pte);
+}
+
+static inline void __set_ptes(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pte_t *ptep, pte_t pte, unsigned int nr)
 {
-	__sync_cache_and_tags(pte, nr);
-	__check_safe_pte_update(mm, ptep, pte);
-	__set_pte(ptep, pte);
+	__set_ptes_anysz(mm, ptep, pte, nr, PAGE_SIZE);
 }
 
-static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
-			      pmd_t *pmdp, pmd_t pmd)
+static inline void __set_pmds(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pmd_t *pmdp, pmd_t pmd, unsigned int nr)
 {
-	page_table_check_pmd_set(mm, pmdp, pmd);
-	return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd),
-						PMD_SIZE >> PAGE_SHIFT);
+	__set_ptes_anysz(mm, (pte_t *)pmdp, pmd_pte(pmd), nr, PMD_SIZE);
 }
+#define set_pmd_at(mm, addr, pmdp, pmd) __set_pmds(mm, addr, pmdp, pmd, 1)
 
-static inline void set_pud_at(struct mm_struct *mm, unsigned long addr,
-			      pud_t *pudp, pud_t pud)
+static inline void __set_puds(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pud_t *pudp, pud_t pud, unsigned int nr)
 {
-	page_table_check_pud_set(mm, pudp, pud);
-	return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud),
-						PUD_SIZE >> PAGE_SHIFT);
+	__set_ptes_anysz(mm, (pte_t *)pudp, pud_pte(pud), nr, PUD_SIZE);
 }
+#define set_pud_at(mm, addr, pudp, pud) __set_puds(mm, addr, pudp, pud, 1)
 
 #define __p4d_to_phys(p4d)	__pte_to_phys(p4d_pte(p4d))
 #define __phys_to_p4d_val(phys)	__phys_to_pte_val(phys)
@@ -739,8 +836,7 @@ static inline int pmd_trans_huge(pmd_t pmd)
 	 * If pmd is present-invalid, pmd_table() won't detect it
 	 * as a table, so force the valid bit for the comparison.
 	 */
-	return pmd_val(pmd) && pmd_present(pmd) &&
-	       !pmd_table(__pmd(pmd_val(pmd) | PTE_VALID));
+	return pmd_present(pmd) && !pmd_table(__pmd(pmd_val(pmd) | PTE_VALID));
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
@@ -754,8 +850,6 @@ static inline bool pud_table(pud_t pud) { return true; }
 				 PUD_TYPE_TABLE)
 #endif
 
-extern pgd_t init_pg_dir[];
-extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[];
 extern pgd_t idmap_pg_dir[];
 extern pgd_t tramp_pg_dir[];
@@ -780,10 +874,8 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 
 	WRITE_ONCE(*pmdp, pmd);
 
-	if (pmd_valid(pmd)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pmd_valid(pmd))
+		queue_pte_barriers();
 }
 
 static inline void pmd_clear(pmd_t *pmdp)
@@ -813,12 +905,6 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 /* use ONLY for statically allocated translation tables */
 #define pte_offset_kimg(dir,addr)	((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr))))
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
 #if CONFIG_PGTABLE_LEVELS > 2
 
 #define pmd_ERROR(e)	\
@@ -848,10 +934,8 @@ static inline void set_pud(pud_t *pudp, pud_t pud)
 
 	WRITE_ONCE(*pudp, pud);
 
-	if (pud_valid(pud)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pud_valid(pud))
+		queue_pte_barriers();
 }
 
 static inline void pud_clear(pud_t *pudp)
@@ -930,8 +1014,7 @@ static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 	}
 
 	WRITE_ONCE(*p4dp, p4d);
-	dsb(ishst);
-	isb();
+	queue_pte_barriers();
 }
 
 static inline void p4d_clear(p4d_t *p4dp)
@@ -1059,8 +1142,7 @@ static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
 	}
 
 	WRITE_ONCE(*pgdp, pgd);
-	dsb(ishst);
-	isb();
+	queue_pte_barriers();
 }
 
 static inline void pgd_clear(pgd_t *pgdp)
@@ -1301,16 +1383,37 @@ static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG */
 
-static inline pte_t __ptep_get_and_clear(struct mm_struct *mm,
-				       unsigned long address, pte_t *ptep)
+static inline pte_t __ptep_get_and_clear_anysz(struct mm_struct *mm,
+					       pte_t *ptep,
+					       unsigned long pgsize)
 {
 	pte_t pte = __pte(xchg_relaxed(&pte_val(*ptep), 0));
 
-	page_table_check_pte_clear(mm, pte);
+	switch (pgsize) {
+	case PAGE_SIZE:
+		page_table_check_pte_clear(mm, pte);
+		break;
+	case PMD_SIZE:
+		page_table_check_pmd_clear(mm, pte_pmd(pte));
+		break;
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		page_table_check_pud_clear(mm, pte_pud(pte));
+		break;
+#endif
+	default:
+		VM_WARN_ON(1);
+	}
 
 	return pte;
 }
 
+static inline pte_t __ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long address, pte_t *ptep)
+{
+	return __ptep_get_and_clear_anysz(mm, ptep, PAGE_SIZE);
+}
+
 static inline void __clear_full_ptes(struct mm_struct *mm, unsigned long addr,
 				pte_t *ptep, unsigned int nr, int full)
 {
@@ -1347,11 +1450,7 @@ static inline pte_t __get_and_clear_full_ptes(struct mm_struct *mm,
 static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 					    unsigned long address, pmd_t *pmdp)
 {
-	pmd_t pmd = __pmd(xchg_relaxed(&pmd_val(*pmdp), 0));
-
-	page_table_check_pmd_clear(mm, pmd);
-
-	return pmd;
+	return pte_pmd(__ptep_get_and_clear_anysz(mm, (pte_t *)pmdp, PMD_SIZE));
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/ptdump.h linux-libre-6.16-gnu/arch/arm64/include/asm/ptdump.h
index b2931d1ae0fb..fded5358641f 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/ptdump.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/ptdump.h
@@ -24,8 +24,8 @@ struct ptdump_info {
 };
 
 struct ptdump_prot_bits {
-	u64		mask;
-	u64		val;
+	ptdesc_t	mask;
+	ptdesc_t	val;
 	const char	*set;
 	const char	*clear;
 };
@@ -34,7 +34,7 @@ struct ptdump_pg_level {
 	const struct ptdump_prot_bits *bits;
 	char name[4];
 	int num;
-	u64 mask;
+	ptdesc_t mask;
 };
 
 /*
@@ -51,7 +51,7 @@ struct ptdump_pg_state {
 	const struct mm_struct *mm;
 	unsigned long start_address;
 	int level;
-	u64 current_prot;
+	ptdesc_t current_prot;
 	bool check_wx;
 	unsigned long wx_pages;
 	unsigned long uxn_pages;
@@ -59,7 +59,13 @@ struct ptdump_pg_state {
 
 void ptdump_walk(struct seq_file *s, struct ptdump_info *info);
 void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
-	       u64 val);
+	       pteval_t val);
+void note_page_pte(struct ptdump_state *st, unsigned long addr, pte_t pte);
+void note_page_pmd(struct ptdump_state *st, unsigned long addr, pmd_t pmd);
+void note_page_pud(struct ptdump_state *st, unsigned long addr, pud_t pud);
+void note_page_p4d(struct ptdump_state *st, unsigned long addr, p4d_t p4d);
+void note_page_pgd(struct ptdump_state *st, unsigned long addr, pgd_t pgd);
+void note_page_flush(struct ptdump_state *st);
 #ifdef CONFIG_PTDUMP_DEBUGFS
 #define EFI_RUNTIME_MAP_END	DEFAULT_MAP_WINDOW_64
 void __init ptdump_debugfs_register(struct ptdump_info *info, const char *name);
@@ -69,7 +75,13 @@ static inline void ptdump_debugfs_register(struct ptdump_info *info,
 #endif /* CONFIG_PTDUMP_DEBUGFS */
 #else
 static inline void note_page(struct ptdump_state *pt_st, unsigned long addr,
-			     int level, u64 val) { }
+			     int level, pteval_t val) { }
+static inline void note_page_pte(struct ptdump_state *st, unsigned long addr, pte_t pte) { }
+static inline void note_page_pmd(struct ptdump_state *st, unsigned long addr, pmd_t pmd) { }
+static inline void note_page_pud(struct ptdump_state *st, unsigned long addr, pud_t pud) { }
+static inline void note_page_p4d(struct ptdump_state *st, unsigned long addr, p4d_t p4d) { }
+static inline void note_page_pgd(struct ptdump_state *st, unsigned long addr, pgd_t pgd) { }
+static inline void note_page_flush(struct ptdump_state *st) { }
 #endif /* CONFIG_PTDUMP */
 
 #endif /* __ASM_PTDUMP_H */
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/rsi_cmds.h linux-libre-6.16-gnu/arch/arm64/include/asm/rsi_cmds.h
index e6a211001bd3..2c8763876dfb 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/rsi_cmds.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/rsi_cmds.h
@@ -7,6 +7,8 @@
 #define __ASM_RSI_CMDS_H
 
 #include <linux/arm-smccc.h>
+#include <linux/string.h>
+#include <asm/memory.h>
 
 #include <asm/rsi_smc.h>
 
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/rwonce.h linux-libre-6.16-gnu/arch/arm64/include/asm/rwonce.h
index 56f7b1d4d54b..97d9256d33c9 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/rwonce.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/rwonce.h
@@ -12,16 +12,12 @@
 
 #ifndef BUILD_VDSO
 
-#ifdef CONFIG_AS_HAS_LDAPR
 #define __LOAD_RCPC(sfx, regs...)					\
 	ALTERNATIVE(							\
 		"ldar"	#sfx "\t" #regs,				\
 		".arch_extension rcpc\n"				\
 		"ldapr"	#sfx "\t" #regs,				\
 	ARM64_HAS_LDAPR)
-#else
-#define __LOAD_RCPC(sfx, regs...)	"ldar" #sfx "\t" #regs
-#endif /* CONFIG_AS_HAS_LDAPR */
 
 /*
  * When building with LTO, there is an increased risk of the compiler
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/sections.h linux-libre-6.16-gnu/arch/arm64/include/asm/sections.h
index 40971ac1303f..51b0d594239e 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/sections.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/sections.h
@@ -11,6 +11,7 @@ extern char __alt_instructions[], __alt_instructions_end[];
 extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
 extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
 extern char __hyp_text_start[], __hyp_text_end[];
+extern char __hyp_data_start[], __hyp_data_end[];
 extern char __hyp_rodata_start[], __hyp_rodata_end[];
 extern char __hyp_reloc_begin[], __hyp_reloc_end[];
 extern char __hyp_bss_start[], __hyp_bss_end[];
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/syscall.h linux-libre-6.16-gnu/arch/arm64/include/asm/syscall.h
index ab8e14b96f68..712daa90e643 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/syscall.h
@@ -61,6 +61,22 @@ static inline void syscall_set_return_value(struct task_struct *task,
 	regs->regs[0] = val;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->syscallno = nr;
+	if (nr == -1) {
+		/*
+		 * When the syscall number is set to -1, the syscall will be
+		 * skipped.  In this case the syscall return value has to be
+		 * set explicitly, otherwise the first syscall argument is
+		 * returned as the syscall return value.
+		 */
+		syscall_set_return_value(task, regs, -ENOSYS, 0);
+	}
+}
+
 #define SYSCALL_MAX_ARGS 6
 
 static inline void syscall_get_arguments(struct task_struct *task,
@@ -73,6 +89,19 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->regs[1], 5 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->regs[0], args, 6 * sizeof(args[0]));
+	/*
+	 * Also copy the first argument into orig_x0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->orig_x0 = regs->regs[0];
+}
+
 /*
  * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
  * AArch64 has the same system calls both on little- and big- endian.
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/sysreg.h linux-libre-6.16-gnu/arch/arm64/include/asm/sysreg.h
index 2639d3633073..f1bb0d10c39a 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/sysreg.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/sysreg.h
@@ -12,6 +12,7 @@
 #include <linux/bits.h>
 #include <linux/stringify.h>
 #include <linux/kasan-tags.h>
+#include <linux/kconfig.h>
 
 #include <asm/gpr-num.h>
 
@@ -117,6 +118,7 @@
 
 #define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
 
+/* Data cache zero operations */
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
 #define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
 #define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
@@ -153,11 +155,13 @@
 #define SYS_DC_CIGVAC			sys_insn(1, 3, 7, 14, 3)
 #define SYS_DC_CIGDVAC			sys_insn(1, 3, 7, 14, 5)
 
-/* Data cache zero operations */
 #define SYS_DC_ZVA			sys_insn(1, 3, 7, 4, 1)
 #define SYS_DC_GVA			sys_insn(1, 3, 7, 4, 3)
 #define SYS_DC_GZVA			sys_insn(1, 3, 7, 4, 4)
 
+#define SYS_DC_CIVAPS			sys_insn(1, 0, 7, 15, 1)
+#define SYS_DC_CIGDVAPS			sys_insn(1, 0, 7, 15, 5)
+
 /*
  * Automatically generated definitions for system registers, the
  * manual encodings below are in the process of being converted to
@@ -497,12 +501,22 @@
 
 #define __PMEV_op2(n)			((n) & 0x7)
 #define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
+#define SYS_PMEVCNTSVRn_EL1(n)		sys_reg(2, 0, 14, __CNTR_CRm(n), __PMEV_op2(n))
 #define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
 #define __TYPER_CRm(n)			(0xc | (((n) >> 3) & 0x3))
 #define SYS_PMEVTYPERn_EL0(n)		sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n))
 
 #define SYS_PMCCFILTR_EL0		sys_reg(3, 3, 14, 15, 7)
 
+#define	SYS_SPMCGCRn_EL1(n)		sys_reg(2, 0, 9, 13, ((n) & 1))
+
+#define __SPMEV_op2(n)			((n) & 0x7)
+#define __SPMEV_crm(p, n)		((((p) & 7) << 1) | (((n) >> 3) & 1))
+#define SYS_SPMEVCNTRn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b000, n), __SPMEV_op2(n))
+#define	SYS_SPMEVFILT2Rn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b011, n), __SPMEV_op2(n))
+#define	SYS_SPMEVFILTRn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b010, n), __SPMEV_op2(n))
+#define	SYS_SPMEVTYPERn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b001, n), __SPMEV_op2(n))
+
 #define SYS_VPIDR_EL2			sys_reg(3, 4, 0, 0, 0)
 #define SYS_VMPIDR_EL2			sys_reg(3, 4, 0, 0, 5)
 
@@ -521,7 +535,6 @@
 #define SYS_VTTBR_EL2			sys_reg(3, 4, 2, 1, 0)
 #define SYS_VTCR_EL2			sys_reg(3, 4, 2, 1, 2)
 
-#define SYS_VNCR_EL2			sys_reg(3, 4, 2, 2, 0)
 #define SYS_HAFGRTR_EL2			sys_reg(3, 4, 3, 1, 6)
 #define SYS_SPSR_EL2			sys_reg(3, 4, 4, 0, 0)
 #define SYS_ELR_EL2			sys_reg(3, 4, 4, 0, 1)
@@ -608,28 +621,18 @@
 
 /* VHE encodings for architectural EL0/1 system registers */
 #define SYS_BRBCR_EL12			sys_reg(2, 5, 9, 0, 0)
-#define SYS_SCTLR_EL12			sys_reg(3, 5, 1, 0, 0)
-#define SYS_CPACR_EL12			sys_reg(3, 5, 1, 0, 2)
-#define SYS_SCTLR2_EL12			sys_reg(3, 5, 1, 0, 3)
-#define SYS_ZCR_EL12			sys_reg(3, 5, 1, 2, 0)
-#define SYS_TRFCR_EL12			sys_reg(3, 5, 1, 2, 1)
-#define SYS_SMCR_EL12			sys_reg(3, 5, 1, 2, 6)
 #define SYS_TTBR0_EL12			sys_reg(3, 5, 2, 0, 0)
 #define SYS_TTBR1_EL12			sys_reg(3, 5, 2, 0, 1)
-#define SYS_TCR_EL12			sys_reg(3, 5, 2, 0, 2)
-#define SYS_TCR2_EL12			sys_reg(3, 5, 2, 0, 3)
 #define SYS_SPSR_EL12			sys_reg(3, 5, 4, 0, 0)
 #define SYS_ELR_EL12			sys_reg(3, 5, 4, 0, 1)
 #define SYS_AFSR0_EL12			sys_reg(3, 5, 5, 1, 0)
 #define SYS_AFSR1_EL12			sys_reg(3, 5, 5, 1, 1)
 #define SYS_ESR_EL12			sys_reg(3, 5, 5, 2, 0)
 #define SYS_TFSR_EL12			sys_reg(3, 5, 5, 6, 0)
-#define SYS_FAR_EL12			sys_reg(3, 5, 6, 0, 0)
 #define SYS_PMSCR_EL12			sys_reg(3, 5, 9, 9, 0)
 #define SYS_MAIR_EL12			sys_reg(3, 5, 10, 2, 0)
 #define SYS_AMAIR_EL12			sys_reg(3, 5, 10, 3, 0)
 #define SYS_VBAR_EL12			sys_reg(3, 5, 12, 0, 0)
-#define SYS_CONTEXTIDR_EL12		sys_reg(3, 5, 13, 0, 1)
 #define SYS_SCXTNUM_EL12		sys_reg(3, 5, 13, 0, 7)
 #define SYS_CNTKCTL_EL12		sys_reg(3, 5, 14, 1, 0)
 #define SYS_CNTP_TVAL_EL02		sys_reg(3, 5, 14, 2, 0)
@@ -1091,6 +1094,15 @@
 	__emit_inst(0xd5000000|(\sreg)|(.L__gpr_num_\rt))
 	.endm
 
+	.macro	msr_hcr_el2, reg
+#if IS_ENABLED(CONFIG_AMPERE_ERRATUM_AC04_CPU_23)
+	dsb	nsh
+	msr	hcr_el2, \reg
+	isb
+#else
+	msr	hcr_el2, \reg
+#endif
+	.endm
 #else
 
 #include <linux/bitfield.h>
@@ -1178,6 +1190,13 @@
 		write_sysreg(__scs_new, sysreg);			\
 } while (0)
 
+#define sysreg_clear_set_hcr(clear, set) do {				\
+	u64 __scs_val = read_sysreg(hcr_el2);				\
+	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
+	if (__scs_new != __scs_val)					\
+		write_sysreg_hcr(__scs_new);			\
+} while (0)
+
 #define sysreg_clear_set_s(sysreg, clear, set) do {			\
 	u64 __scs_val = read_sysreg_s(sysreg);				\
 	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
@@ -1185,6 +1204,17 @@
 		write_sysreg_s(__scs_new, sysreg);			\
 } while (0)
 
+#define write_sysreg_hcr(__val) do {					\
+	if (IS_ENABLED(CONFIG_AMPERE_ERRATUM_AC04_CPU_23) &&		\
+	   (!system_capabilities_finalized() ||				\
+	    alternative_has_cap_unlikely(ARM64_WORKAROUND_AMPERE_AC04_CPU_23))) \
+		asm volatile("dsb nsh; msr hcr_el2, %x0; isb"		\
+			     : : "rZ" (__val));				\
+	else								\
+		asm volatile("msr hcr_el2, %x0"				\
+			     : : "rZ" (__val));				\
+} while (0)
+
 #define read_sysreg_par() ({						\
 	u64 par;							\
 	asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412));	\
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/thread_info.h linux-libre-6.16-gnu/arch/arm64/include/asm/thread_info.h
index 1114c1c3300a..1269c2487574 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/thread_info.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/thread_info.h
@@ -59,11 +59,12 @@ void arch_setup_new_exec(void);
 
 #define TIF_SIGPENDING		0	/* signal pending */
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
-#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_FOREIGN_FPSTATE	3	/* CPU's FP state is not current's */
-#define TIF_UPROBE		4	/* uprobe breakpoint or singlestep */
-#define TIF_MTE_ASYNC_FAULT	5	/* MTE Asynchronous Tag Check Fault */
-#define TIF_NOTIFY_SIGNAL	6	/* signal notifications exist */
+#define TIF_NEED_RESCHED_LAZY	2	/* Lazy rescheduling needed */
+#define TIF_NOTIFY_RESUME	3	/* callback before returning to user */
+#define TIF_FOREIGN_FPSTATE	4	/* CPU's FP state is not current's */
+#define TIF_UPROBE		5	/* uprobe breakpoint or singlestep */
+#define TIF_MTE_ASYNC_FAULT	6	/* MTE Asynchronous Tag Check Fault */
+#define TIF_NOTIFY_SIGNAL	7	/* signal notifications exist */
 #define TIF_SYSCALL_TRACE	8	/* syscall trace active */
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing */
 #define TIF_SYSCALL_TRACEPOINT	10	/* syscall tracepoint for ftrace */
@@ -82,9 +83,12 @@ void arch_setup_new_exec(void);
 #define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
 #define TIF_KERNEL_FPSTATE	29	/* Task is in a kernel mode FPSIMD section */
 #define TIF_TSC_SIGSEGV		30	/* SIGSEGV on counter-timer access */
+#define TIF_LAZY_MMU		31	/* Task in lazy mmu mode */
+#define TIF_LAZY_MMU_PENDING	32	/* Ops pending for lazy mmu mode exit */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NEED_RESCHED_LAZY	(1 << TIF_NEED_RESCHED_LAZY)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FOREIGN_FPSTATE	(1 << TIF_FOREIGN_FPSTATE)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
@@ -100,10 +104,10 @@ void arch_setup_new_exec(void);
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
 #define _TIF_TSC_SIGSEGV	(1 << TIF_TSC_SIGSEGV)
 
-#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_NEED_RESCHED_LAZY | \
 				 _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
 				 _TIF_UPROBE | _TIF_MTE_ASYNC_FAULT | \
-				 _TIF_NOTIFY_SIGNAL)
+				 _TIF_NOTIFY_SIGNAL | _TIF_SIGPENDING)
 
 #define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/tlbflush.h linux-libre-6.16-gnu/arch/arm64/include/asm/tlbflush.h
index eba1a98657f1..aa9efee17277 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/tlbflush.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/tlbflush.h
@@ -323,13 +323,14 @@ static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
 }
 
 /*
- * If mprotect/munmap/etc occurs during TLB batched flushing, we need to
- * synchronise all the TLBI issued with a DSB to avoid the race mentioned in
- * flush_tlb_batched_pending().
+ * If mprotect/munmap/etc occurs during TLB batched flushing, we need to ensure
+ * all the previously issued TLBIs targeting mm have completed. But since we
+ * can be executing on a remote CPU, a DSB cannot guarantee this like it can
+ * for arch_tlbbatch_flush(). Our only option is to flush the entire mm.
  */
 static inline void arch_flush_tlb_batched_pending(struct mm_struct *mm)
 {
-	dsb(ish);
+	flush_tlb_mm(mm);
 }
 
 /*
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/vdso/gettimeofday.h linux-libre-6.16-gnu/arch/arm64/include/asm/vdso/gettimeofday.h
index 3322c7047d84..da1ab8759592 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/vdso/gettimeofday.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -8,6 +8,7 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/alternative.h>
+#include <asm/arch_timer.h>
 #include <asm/barrier.h>
 #include <asm/unistd.h>
 #include <asm/sysreg.h>
@@ -69,8 +70,6 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
 static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
 						 const struct vdso_time_data *vd)
 {
-	u64 res;
-
 	/*
 	 * Core checks for mode already, so this raced against a concurrent
 	 * update. Return something. Core will do another round and then
@@ -79,24 +78,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
 	if (clock_mode == VDSO_CLOCKMODE_NONE)
 		return 0;
 
-	/*
-	 * If FEAT_ECV is available, use the self-synchronizing counter.
-	 * Otherwise the isb is required to prevent that the counter value
-	 * is speculated.
-	*/
-	asm volatile(
-	ALTERNATIVE("isb\n"
-		    "mrs %0, cntvct_el0",
-		    "nop\n"
-		    __mrs_s("%0", SYS_CNTVCTSS_EL0),
-		    ARM64_HAS_ECV)
-	: "=r" (res)
-	:
-	: "memory");
-
-	arch_counter_enforce_ordering(res);
-
-	return res;
+	return __arch_counter_get_cntvct();
 }
 
 #if IS_ENABLED(CONFIG_CC_IS_GCC) && IS_ENABLED(CONFIG_PAGE_SIZE_64KB)
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/virt.h linux-libre-6.16-gnu/arch/arm64/include/asm/virt.h
index ebf4a9f943ed..aa280f356b96 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/virt.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/virt.h
@@ -67,7 +67,8 @@
  * __boot_cpu_mode records what mode CPUs were booted in.
  * A correctly-implemented bootloader must start all CPUs in the same mode:
  * In this case, both 32bit halves of __boot_cpu_mode will contain the
- * same value (either 0 if booted in EL1, BOOT_CPU_MODE_EL2 if booted in EL2).
+ * same value (either BOOT_CPU_MODE_EL1 if booted in EL1, BOOT_CPU_MODE_EL2 if
+ * booted in EL2).
  *
  * Should the bootloader fail to do this, the two values will be different.
  * This allows the kernel to flag an error when the secondaries have come up.
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/vmalloc.h linux-libre-6.16-gnu/arch/arm64/include/asm/vmalloc.h
index 38fafffe699f..12f534e8f3ed 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/vmalloc.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/vmalloc.h
@@ -23,6 +23,51 @@ static inline bool arch_vmap_pmd_supported(pgprot_t prot)
 	return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
 }
 
+#define arch_vmap_pte_range_map_size arch_vmap_pte_range_map_size
+static inline unsigned long arch_vmap_pte_range_map_size(unsigned long addr,
+						unsigned long end, u64 pfn,
+						unsigned int max_page_shift)
+{
+	/*
+	 * If the block is at least CONT_PTE_SIZE in size, and is naturally
+	 * aligned in both virtual and physical space, then we can pte-map the
+	 * block using the PTE_CONT bit for more efficient use of the TLB.
+	 */
+	if (max_page_shift < CONT_PTE_SHIFT)
+		return PAGE_SIZE;
+
+	if (end - addr < CONT_PTE_SIZE)
+		return PAGE_SIZE;
+
+	if (!IS_ALIGNED(addr, CONT_PTE_SIZE))
+		return PAGE_SIZE;
+
+	if (!IS_ALIGNED(PFN_PHYS(pfn), CONT_PTE_SIZE))
+		return PAGE_SIZE;
+
+	return CONT_PTE_SIZE;
+}
+
+#define arch_vmap_pte_range_unmap_size arch_vmap_pte_range_unmap_size
+static inline unsigned long arch_vmap_pte_range_unmap_size(unsigned long addr,
+							   pte_t *ptep)
+{
+	/*
+	 * The caller handles alignment so it's sufficient just to check
+	 * PTE_CONT.
+	 */
+	return pte_valid_cont(__ptep_get(ptep)) ? CONT_PTE_SIZE : PAGE_SIZE;
+}
+
+#define arch_vmap_pte_supported_shift arch_vmap_pte_supported_shift
+static inline int arch_vmap_pte_supported_shift(unsigned long size)
+{
+	if (size >= CONT_PTE_SIZE)
+		return CONT_PTE_SHIFT;
+
+	return PAGE_SHIFT;
+}
+
 #endif
 
 #define arch_vmap_pgprot_tagged arch_vmap_pgprot_tagged
diff --git linux-libre-6.15-gnu/arch/arm64/include/asm/vncr_mapping.h linux-libre-6.16-gnu/arch/arm64/include/asm/vncr_mapping.h
index 4f9bbd4d6c26..6f556e993644 100644
--- linux-libre-6.15-gnu/arch/arm64/include/asm/vncr_mapping.h
+++ linux-libre-6.16-gnu/arch/arm64/include/asm/vncr_mapping.h
@@ -35,6 +35,8 @@
 #define VNCR_CNTP_CTL_EL0       0x180
 #define VNCR_SCXTNUM_EL1        0x188
 #define VNCR_TFSR_EL1		0x190
+#define VNCR_HDFGRTR2_EL2	0x1A0
+#define VNCR_HDFGWTR2_EL2	0x1B0
 #define VNCR_HFGRTR_EL2		0x1B8
 #define VNCR_HFGWTR_EL2		0x1C0
 #define VNCR_HFGITR_EL2		0x1C8
@@ -52,6 +54,9 @@
 #define VNCR_PIRE0_EL1		0x290
 #define VNCR_PIR_EL1		0x2A0
 #define VNCR_POR_EL1		0x2A8
+#define VNCR_HFGRTR2_EL2	0x2C0
+#define VNCR_HFGWTR2_EL2	0x2C8
+#define VNCR_HFGITR2_EL2	0x310
 #define VNCR_ICH_LR0_EL2        0x400
 #define VNCR_ICH_LR1_EL2        0x408
 #define VNCR_ICH_LR2_EL2        0x410
diff --git linux-libre-6.15-gnu/arch/arm64/include/uapi/asm/kvm.h linux-libre-6.16-gnu/arch/arm64/include/uapi/asm/kvm.h
index af9d9acaf997..ed5f3892674c 100644
--- linux-libre-6.15-gnu/arch/arm64/include/uapi/asm/kvm.h
+++ linux-libre-6.16-gnu/arch/arm64/include/uapi/asm/kvm.h
@@ -431,10 +431,11 @@ enum {
 
 /* Device Control API on vcpu fd */
 #define KVM_ARM_VCPU_PMU_V3_CTRL	0
-#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
-#define   KVM_ARM_VCPU_PMU_V3_INIT	1
-#define   KVM_ARM_VCPU_PMU_V3_FILTER	2
-#define   KVM_ARM_VCPU_PMU_V3_SET_PMU	3
+#define   KVM_ARM_VCPU_PMU_V3_IRQ		0
+#define   KVM_ARM_VCPU_PMU_V3_INIT		1
+#define   KVM_ARM_VCPU_PMU_V3_FILTER		2
+#define   KVM_ARM_VCPU_PMU_V3_SET_PMU		3
+#define   KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS	4
 #define KVM_ARM_VCPU_TIMER_CTRL		1
 #define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
 #define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/Makefile linux-libre-6.16-gnu/arch/arm64/kernel/Makefile
index 71c29a2a2f19..a2faf0049dab 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/kernel/Makefile
@@ -34,7 +34,7 @@ obj-y			:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   cpufeature.o alternative.o cacheinfo.o		\
 			   smp.o smp_spin_table.o topology.o smccc-call.o	\
 			   syscall.o proton-pack.o idle.o patching.o pi/	\
-			   rsi.o
+			   rsi.o jump_label.o
 
 obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
 					   sys_compat.o
@@ -47,7 +47,6 @@ obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HARDLOCKUP_DETECTOR_PERF)	+= watchdog_hld.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_CPU_PM)			+= sleep.o suspend.o
-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_EFI)			+= efi.o efi-rt-wrapper.o
 obj-$(CONFIG_PCI)			+= pci.o
@@ -78,7 +77,7 @@ $(obj)/vdso32-wrap.o: $(obj)/vdso32/vdso.so
 
 obj-y					+= probes/
 obj-y					+= head.o
-extra-y					+= vmlinux.lds
+always-$(KBUILD_BUILTIN)		+= vmlinux.lds
 
 ifeq ($(CONFIG_DEBUG_EFI),y)
 AFLAGS_head.o += -DVMLINUX_PATH="\"$(realpath $(objtree)/vmlinux)\""
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/asm-offsets.c linux-libre-6.16-gnu/arch/arm64/kernel/asm-offsets.c
index eb1a840e4110..30d4bbe68661 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/asm-offsets.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/asm-offsets.c
@@ -182,5 +182,7 @@ int main(void)
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
   DEFINE(FTRACE_OPS_DIRECT_CALL,	offsetof(struct ftrace_ops, direct_call));
 #endif
+  DEFINE(PIE_E0_ASM, PIE_E0);
+  DEFINE(PIE_E1_ASM, PIE_E1);
   return 0;
 }
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/cpu_errata.c linux-libre-6.16-gnu/arch/arm64/kernel/cpu_errata.c
index 6b0ad5070d3e..59d723c9ab8f 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/cpu_errata.c
@@ -557,6 +557,13 @@ static const struct midr_range erratum_ac03_cpu_38_list[] = {
 };
 #endif
 
+#ifdef CONFIG_AMPERE_ERRATUM_AC04_CPU_23
+static const struct midr_range erratum_ac04_cpu_23_list[] = {
+	MIDR_ALL_VERSIONS(MIDR_AMPERE1A),
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -875,6 +882,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_38,
 		ERRATA_MIDR_RANGE_LIST(erratum_ac03_cpu_38_list),
 	},
+#endif
+#ifdef CONFIG_AMPERE_ERRATUM_AC04_CPU_23
+	{
+		.desc = "AmpereOne erratum AC04_CPU_23",
+		.capability = ARM64_WORKAROUND_AMPERE_AC04_CPU_23,
+		ERRATA_MIDR_RANGE_LIST(erratum_ac04_cpu_23_list),
+	},
 #endif
 	{
 		.desc = "Broken CNTVOFF_EL2",
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/cpufeature.c linux-libre-6.16-gnu/arch/arm64/kernel/cpufeature.c
index 4c46d80aa64b..e151585c6cca 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/cpufeature.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/cpufeature.c
@@ -305,6 +305,7 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_GCS),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_GCS_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MTE_frac_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SME_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MPAM_frac_SHIFT, 4, 0),
@@ -765,17 +766,17 @@ static const struct arm64_ftr_bits ftr_raz[] = {
 #define ARM64_FTR_REG(id, table)		\
 	__ARM64_FTR_REG_OVERRIDE(#id, id, table, &no_override)
 
-struct arm64_ftr_override id_aa64mmfr0_override;
-struct arm64_ftr_override id_aa64mmfr1_override;
-struct arm64_ftr_override id_aa64mmfr2_override;
-struct arm64_ftr_override id_aa64pfr0_override;
-struct arm64_ftr_override id_aa64pfr1_override;
-struct arm64_ftr_override id_aa64zfr0_override;
-struct arm64_ftr_override id_aa64smfr0_override;
-struct arm64_ftr_override id_aa64isar1_override;
-struct arm64_ftr_override id_aa64isar2_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr1_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr2_override;
+struct arm64_ftr_override __read_mostly id_aa64pfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64pfr1_override;
+struct arm64_ftr_override __read_mostly id_aa64zfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64smfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64isar1_override;
+struct arm64_ftr_override __read_mostly id_aa64isar2_override;
 
-struct arm64_ftr_override arm64_sw_feature_override;
+struct arm64_ftr_override __read_mostly arm64_sw_feature_override;
 
 static const struct __ftr_reg_entry {
 	u32			sys_id;
@@ -1198,8 +1199,10 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 		cpacr_restore(cpacr);
 	}
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0))
+	if (id_aa64pfr0_mpam(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
 		init_cpu_ftr_reg(SYS_MPAMIDR_EL1, info->reg_mpamidr);
+	}
 
 	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
 		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
@@ -1410,6 +1413,8 @@ void update_cpu_features(int cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR3_EL1, cpu,
 				      info->reg_id_aa64mmfr3, boot->reg_id_aa64mmfr3);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR4_EL1, cpu,
+				      info->reg_id_aa64mmfr4, boot->reg_id_aa64mmfr4);
 
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
@@ -1450,7 +1455,8 @@ void update_cpu_features(int cpu,
 		cpacr_restore(cpacr);
 	}
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0)) {
+	if (id_aa64pfr0_mpam(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
 		taint |= check_update_ftr_reg(SYS_MPAMIDR_EL1, cpu,
 					info->reg_mpamidr, boot->reg_mpamidr);
 	}
@@ -2883,6 +2889,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, FGT, IMP)
 	},
+	{
+		.desc = "Fine Grained Traps 2",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_FGT2,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, FGT, FGT2)
+	},
 #ifdef CONFIG_ARM64_SME
 	{
 		.desc = "Scalable Matrix Extension",
@@ -3122,6 +3135,13 @@ static bool has_sve_feature(const struct arm64_cpu_capabilities *cap, int scope)
 }
 #endif
 
+#ifdef CONFIG_ARM64_SME
+static bool has_sme_feature(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	return system_supports_sme() && has_user_cpuid_feature(cap, scope);
+}
+#endif
+
 static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, PMULL, CAP_HWCAP, KERNEL_HWCAP_PMULL),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, AES, CAP_HWCAP, KERNEL_HWCAP_AES),
@@ -3210,31 +3230,31 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR2_EL1, BC, IMP, CAP_HWCAP, KERNEL_HWCAP_HBC),
 #ifdef CONFIG_ARM64_SME
 	HWCAP_CAP(ID_AA64PFR1_EL1, SME, IMP, CAP_HWCAP, KERNEL_HWCAP_SME),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, LUTv2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_LUTV2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2p2, CAP_HWCAP, KERNEL_HWCAP_SME2P2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F8F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F8F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8FMA),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8DP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP4),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8DP2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SBitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SBITPERM),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_AES),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SFEXPA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SFEXPA),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, STMOP, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_STMOP),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMOP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SMOP4),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, LUTv2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_LUTV2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2p2, CAP_HWCAP, KERNEL_HWCAP_SME2P2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F8F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F8F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8FMA),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8DP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP4),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8DP2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SBitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SBITPERM),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_AES),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SFEXPA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SFEXPA),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, STMOP, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_STMOP),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMOP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SMOP4),
 #endif /* CONFIG_ARM64_SME */
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8CVT, IMP, CAP_HWCAP, KERNEL_HWCAP_F8CVT),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_F8FMA),
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/cpuinfo.c linux-libre-6.16-gnu/arch/arm64/kernel/cpuinfo.c
index 285d7d538342..c1f2b6b04b41 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/cpuinfo.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/cpuinfo.c
@@ -209,80 +209,79 @@ static const char *const compat_hwcap2_str[] = {
 
 static int c_show(struct seq_file *m, void *v)
 {
-	int i, j;
+	int j;
+	int cpu = m->index;
 	bool compat = personality(current->personality) == PER_LINUX32;
+	struct cpuinfo_arm64 *cpuinfo = v;
+	u32 midr = cpuinfo->reg_midr;
 
-	for_each_online_cpu(i) {
-		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
-		u32 midr = cpuinfo->reg_midr;
-
-		/*
-		 * glibc reads /proc/cpuinfo to determine the number of
-		 * online processors, looking for lines beginning with
-		 * "processor".  Give glibc what it expects.
-		 */
-		seq_printf(m, "processor\t: %d\n", i);
-		if (compat)
-			seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
-				   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
+	/*
+	 * glibc reads /proc/cpuinfo to determine the number of
+	 * online processors, looking for lines beginning with
+	 * "processor".  Give glibc what it expects.
+	 */
+	seq_printf(m, "processor\t: %d\n", cpu);
+	if (compat)
+		seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
+			   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
 
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-			   loops_per_jiffy / (500000UL/HZ),
-			   loops_per_jiffy / (5000UL/HZ) % 100);
+	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000UL/HZ),
+		   loops_per_jiffy / (5000UL/HZ) % 100);
 
-		/*
-		 * Dump out the common processor features in a single line.
-		 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
-		 * rather than attempting to parse this, but there's a body of
-		 * software which does already (at least for 32-bit).
-		 */
-		seq_puts(m, "Features\t:");
-		if (compat) {
+	/*
+	 * Dump out the common processor features in a single line.
+	 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
+	 * rather than attempting to parse this, but there's a body of
+	 * software which does already (at least for 32-bit).
+	 */
+	seq_puts(m, "Features\t:");
+	if (compat) {
 #ifdef CONFIG_COMPAT
-			for (j = 0; j < ARRAY_SIZE(compat_hwcap_str); j++) {
-				if (compat_elf_hwcap & (1 << j)) {
-					/*
-					 * Warn once if any feature should not
-					 * have been present on arm64 platform.
-					 */
-					if (WARN_ON_ONCE(!compat_hwcap_str[j]))
-						continue;
-
-					seq_printf(m, " %s", compat_hwcap_str[j]);
-				}
+		for (j = 0; j < ARRAY_SIZE(compat_hwcap_str); j++) {
+			if (compat_elf_hwcap & (1 << j)) {
+				/*
+				 * Warn once if any feature should not
+				 * have been present on arm64 platform.
+				 */
+				if (WARN_ON_ONCE(!compat_hwcap_str[j]))
+					continue;
+
+				seq_printf(m, " %s", compat_hwcap_str[j]);
 			}
+		}
 
-			for (j = 0; j < ARRAY_SIZE(compat_hwcap2_str); j++)
-				if (compat_elf_hwcap2 & (1 << j))
-					seq_printf(m, " %s", compat_hwcap2_str[j]);
+		for (j = 0; j < ARRAY_SIZE(compat_hwcap2_str); j++)
+			if (compat_elf_hwcap2 & (1 << j))
+				seq_printf(m, " %s", compat_hwcap2_str[j]);
 #endif /* CONFIG_COMPAT */
-		} else {
-			for (j = 0; j < ARRAY_SIZE(hwcap_str); j++)
-				if (cpu_have_feature(j))
-					seq_printf(m, " %s", hwcap_str[j]);
-		}
-		seq_puts(m, "\n");
-
-		seq_printf(m, "CPU implementer\t: 0x%02x\n",
-			   MIDR_IMPLEMENTOR(midr));
-		seq_printf(m, "CPU architecture: 8\n");
-		seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
-		seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
-		seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
+	} else {
+		for (j = 0; j < ARRAY_SIZE(hwcap_str); j++)
+			if (cpu_have_feature(j))
+				seq_printf(m, " %s", hwcap_str[j]);
 	}
+	seq_puts(m, "\n");
+
+	seq_printf(m, "CPU implementer\t: 0x%02x\n",
+		   MIDR_IMPLEMENTOR(midr));
+	seq_puts(m, "CPU architecture: 8\n");
+	seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
+	seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
+	seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
 
 	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < 1 ? (void *)1 : NULL;
+	*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	return *pos < nr_cpu_ids ? &per_cpu(cpu_data, *pos) : NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	++*pos;
-	return NULL;
+	return c_start(m, pos);
 }
 
 static void c_stop(struct seq_file *m, void *v)
@@ -328,11 +327,13 @@ static const struct kobj_type cpuregs_kobj_type = {
 
 CPUREGS_ATTR_RO(midr_el1, midr);
 CPUREGS_ATTR_RO(revidr_el1, revidr);
+CPUREGS_ATTR_RO(aidr_el1, aidr);
 CPUREGS_ATTR_RO(smidr_el1, smidr);
 
 static struct attribute *cpuregs_id_attrs[] = {
 	&cpuregs_attr_midr_el1.attr,
 	&cpuregs_attr_revidr_el1.attr,
+	&cpuregs_attr_aidr_el1.attr,
 	NULL
 };
 
@@ -469,6 +470,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	info->reg_dczid = read_cpuid(DCZID_EL0);
 	info->reg_midr = read_cpuid_id();
 	info->reg_revidr = read_cpuid(REVIDR_EL1);
+	info->reg_aidr = read_cpuid(AIDR_EL1);
 
 	info->reg_id_aa64dfr0 = read_cpuid(ID_AA64DFR0_EL1);
 	info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
@@ -494,8 +496,11 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
 		__cpuinfo_store_cpu_32bit(&info->aarch32);
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0))
-		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
+	/*
+	 * info->reg_mpamidr deferred to {init,update}_cpu_features because we
+	 * don't want to read it (and trigger a trap on buggy firmware) if
+	 * using an aa64pfr0_el1 override to unconditionally disable MPAM.
+	 */
 
 	if (IS_ENABLED(CONFIG_ARM64_SME) &&
 	    id_aa64pfr1_sme(info->reg_id_aa64pfr1)) {
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/efi-header.S linux-libre-6.16-gnu/arch/arm64/kernel/efi-header.S
index 11d7f7de202d..329e8df9215f 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/efi-header.S
+++ linux-libre-6.16-gnu/arch/arm64/kernel/efi-header.S
@@ -28,7 +28,7 @@
 	.macro	__EFI_PE_HEADER
 #ifdef CONFIG_EFI
 	.set	.Lpe_header_offset, . - .L_head
-	.long	PE_MAGIC
+	.long	IMAGE_NT_SIGNATURE
 	.short	IMAGE_FILE_MACHINE_ARM64		// Machine
 	.short	.Lsection_count				// NumberOfSections
 	.long	0 					// TimeDateStamp
@@ -40,7 +40,7 @@
 		IMAGE_FILE_LINE_NUMS_STRIPPED		// Characteristics
 
 .Loptional_header:
-	.short	PE_OPT_MAGIC_PE32PLUS			// PE32+ format
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC		// PE32+ format
 	.byte	0x02					// MajorLinkerVersion
 	.byte	0x14					// MinorLinkerVersion
 	.long	__initdata_begin - .Lefi_header_end	// SizeOfCode
@@ -66,7 +66,7 @@
 	.long	.Lefi_header_end - .L_head		// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
+	.short	IMAGE_DLLCHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/efi.c linux-libre-6.16-gnu/arch/arm64/kernel/efi.c
index 1d25d8899dbf..62230d6dd919 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/efi.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/efi.c
@@ -15,6 +15,7 @@
 
 #include <asm/efi.h>
 #include <asm/stacktrace.h>
+#include <asm/vmap_stack.h>
 
 static bool region_is_misaligned(const efi_memory_desc_t *md)
 {
@@ -29,7 +30,7 @@ static bool region_is_misaligned(const efi_memory_desc_t *md)
  * executable, everything else can be mapped with the XN bits
  * set. Also take the new (optional) RO/XP bits into account.
  */
-static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
+static __init ptdesc_t create_mapping_protection(efi_memory_desc_t *md)
 {
 	u64 attr = md->attribute;
 	u32 type = md->type;
@@ -83,7 +84,7 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
 
 int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 {
-	pteval_t prot_val = create_mapping_protection(md);
+	ptdesc_t prot_val = create_mapping_protection(md);
 	bool page_mappings_only = (md->type == EFI_RUNTIME_SERVICES_CODE ||
 				   md->type == EFI_RUNTIME_SERVICES_DATA);
 
@@ -169,14 +170,14 @@ static DEFINE_RAW_SPINLOCK(efi_rt_lock);
 void arch_efi_call_virt_setup(void)
 {
 	efi_virtmap_load();
-	__efi_fpsimd_begin();
 	raw_spin_lock(&efi_rt_lock);
+	__efi_fpsimd_begin();
 }
 
 void arch_efi_call_virt_teardown(void)
 {
-	raw_spin_unlock(&efi_rt_lock);
 	__efi_fpsimd_end();
+	raw_spin_unlock(&efi_rt_lock);
 	efi_virtmap_unload();
 }
 
@@ -214,9 +215,13 @@ static int __init arm64_efi_rt_init(void)
 	if (!efi_enabled(EFI_RUNTIME_SERVICES))
 		return 0;
 
-	p = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, GFP_KERNEL,
-			   NUMA_NO_NODE, &&l);
-l:	if (!p) {
+	if (!IS_ENABLED(CONFIG_VMAP_STACK)) {
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return -ENOMEM;
+	}
+
+	p = arch_alloc_vmap_stack(THREAD_SIZE, NUMA_NO_NODE);
+	if (!p) {
 		pr_warn("Failed to allocate EFI runtime stack\n");
 		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 		return -ENOMEM;
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/entry-common.c linux-libre-6.16-gnu/arch/arm64/kernel/entry-common.c
index b260ddc4d3e9..7c1970b341b8 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/entry-common.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/entry-common.c
@@ -132,7 +132,7 @@ static void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags)
 	do {
 		local_irq_enable();
 
-		if (thread_flags & _TIF_NEED_RESCHED)
+		if (thread_flags & (_TIF_NEED_RESCHED | _TIF_NEED_RESCHED_LAZY))
 			schedule();
 
 		if (thread_flags & _TIF_UPROBE)
@@ -393,20 +393,16 @@ static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
  * As per the ABI exit SME streaming mode and clear the SVE state not
  * shared with FPSIMD on syscall entry.
  */
-static inline void fp_user_discard(void)
+static inline void fpsimd_syscall_enter(void)
 {
-	/*
-	 * If SME is active then exit streaming mode.  If ZA is active
-	 * then flush the SVE registers but leave userspace access to
-	 * both SVE and SME enabled, otherwise disable SME for the
-	 * task and fall through to disabling SVE too.  This means
-	 * that after a syscall we never have any streaming mode
-	 * register state to track, if this changes the KVM code will
-	 * need updating.
-	 */
+	/* Ensure PSTATE.SM is clear, but leave PSTATE.ZA as-is. */
 	if (system_supports_sme())
 		sme_smstop_sm();
 
+	/*
+	 * The CPU is not in streaming mode. If non-streaming SVE is not
+	 * supported, there is no SVE state that needs to be discarded.
+	 */
 	if (!system_supports_sve())
 		return;
 
@@ -416,6 +412,33 @@ static inline void fp_user_discard(void)
 		sve_vq_minus_one = sve_vq_from_vl(task_get_sve_vl(current)) - 1;
 		sve_flush_live(true, sve_vq_minus_one);
 	}
+
+	/*
+	 * Any live non-FPSIMD SVE state has been zeroed. Allow
+	 * fpsimd_save_user_state() to lazily discard SVE state until either
+	 * the live state is unbound or fpsimd_syscall_exit() is called.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_FPSIMD);
+}
+
+static __always_inline void fpsimd_syscall_exit(void)
+{
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * The current task's user FPSIMD/SVE/SME state is now bound to this
+	 * CPU. The fpsimd_last_state.to_save value is either:
+	 *
+	 * - FP_STATE_FPSIMD, if the state has not been reloaded on this CPU
+	 *   since fpsimd_syscall_enter().
+	 *
+	 * - FP_STATE_CURRENT, if the state has been reloaded on this CPU at
+	 *   any point.
+	 *
+	 * Reset this to FP_STATE_CURRENT to stop lazy discarding.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_CURRENT);
 }
 
 UNHANDLED(el1t, 64, sync)
@@ -739,10 +762,11 @@ static void noinstr el0_svc(struct pt_regs *regs)
 {
 	enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
-	fp_user_discard();
+	fpsimd_syscall_enter();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc(regs);
 	exit_to_user_mode(regs);
+	fpsimd_syscall_exit();
 }
 
 static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/entry.S linux-libre-6.16-gnu/arch/arm64/kernel/entry.S
index 5ae2a34b50bd..30dcb719685b 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/entry.S
+++ linux-libre-6.16-gnu/arch/arm64/kernel/entry.S
@@ -825,6 +825,7 @@ SYM_CODE_END(__bp_harden_el1_vectors)
  *
  */
 SYM_FUNC_START(cpu_switch_to)
+	save_and_disable_daif x11
 	mov	x10, #THREAD_CPU_CONTEXT
 	add	x8, x0, x10
 	mov	x9, sp
@@ -848,6 +849,7 @@ SYM_FUNC_START(cpu_switch_to)
 	ptrauth_keys_install_kernel x1, x8, x9, x10
 	scs_save x0
 	scs_load_current
+	restore_irq x11
 	ret
 SYM_FUNC_END(cpu_switch_to)
 NOKPROBE(cpu_switch_to)
@@ -874,6 +876,7 @@ NOKPROBE(ret_from_fork)
  * Calls func(regs) using this CPU's irq stack and shadow irq stack.
  */
 SYM_FUNC_START(call_on_irq_stack)
+	save_and_disable_daif x9
 #ifdef CONFIG_SHADOW_CALL_STACK
 	get_current_task x16
 	scs_save x16
@@ -888,8 +891,10 @@ SYM_FUNC_START(call_on_irq_stack)
 
 	/* Move to the new stack and call the function there */
 	add	sp, x16, #IRQ_STACK_SIZE
+	restore_irq x9
 	blr	x1
 
+	save_and_disable_daif x9
 	/*
 	 * Restore the SP from the FP, and restore the FP and LR from the frame
 	 * record.
@@ -897,6 +902,7 @@ SYM_FUNC_START(call_on_irq_stack)
 	mov	sp, x29
 	ldp	x29, x30, [sp], #16
 	scs_load_current
+	restore_irq x9
 	ret
 SYM_FUNC_END(call_on_irq_stack)
 NOKPROBE(call_on_irq_stack)
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/fpsimd.c linux-libre-6.16-gnu/arch/arm64/kernel/fpsimd.c
index 8370d55f0353..c37f02d7194e 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/fpsimd.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/fpsimd.c
@@ -119,7 +119,7 @@
  *   whatever is in the FPSIMD registers is not saved to memory, but discarded.
  */
 
-static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
 
 __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {
 #ifdef CONFIG_ARM64_SVE
@@ -180,12 +180,12 @@ static inline void set_sve_default_vl(int val)
 	set_default_vl(ARM64_VEC_SVE, val);
 }
 
-static void __percpu *efi_sve_state;
+static u8 *efi_sve_state;
 
 #else /* ! CONFIG_ARM64_SVE */
 
 /* Dummy declaration for code that will be optimised out: */
-extern void __percpu *efi_sve_state;
+extern u8 *efi_sve_state;
 
 #endif /* ! CONFIG_ARM64_SVE */
 
@@ -359,20 +359,15 @@ static void task_fpsimd_load(void)
 	WARN_ON(preemptible());
 	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
-	if (system_supports_fpmr())
-		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
-
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
 		case FP_STATE_FPSIMD:
 			/* Stop tracking SVE for this task until next use. */
-			if (test_and_clear_thread_flag(TIF_SVE))
-				sve_user_disable();
+			clear_thread_flag(TIF_SVE);
 			break;
 		case FP_STATE_SVE:
-			if (!thread_sm_enabled(&current->thread) &&
-			    !WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE)))
-				sve_user_enable();
+			if (!thread_sm_enabled(&current->thread))
+				WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE));
 
 			if (test_thread_flag(TIF_SVE))
 				sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1);
@@ -413,6 +408,9 @@ static void task_fpsimd_load(void)
 			restore_ffr = system_supports_fa64();
 	}
 
+	if (system_supports_fpmr())
+		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
+
 	if (restore_sve_regs) {
 		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_SVE);
 		sve_load_state(sve_pffr(&current->thread),
@@ -453,12 +451,15 @@ static void fpsimd_save_user_state(void)
 		*(last->fpmr) = read_sysreg_s(SYS_FPMR);
 
 	/*
-	 * If a task is in a syscall the ABI allows us to only
-	 * preserve the state shared with FPSIMD so don't bother
-	 * saving the full SVE state in that case.
+	 * Save SVE state if it is live.
+	 *
+	 * The syscall ABI discards live SVE state at syscall entry. When
+	 * entering a syscall, fpsimd_syscall_enter() sets to_save to
+	 * FP_STATE_FPSIMD to allow the SVE state to be lazily discarded until
+	 * either new SVE state is loaded+bound or fpsimd_syscall_exit() is
+	 * called prior to a return to userspace.
 	 */
-	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE) &&
-	     !in_syscall(current_pt_regs())) ||
+	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE)) ||
 	    last->to_save == FP_STATE_SVE) {
 		save_sve_regs = true;
 		save_ffr = true;
@@ -651,7 +652,7 @@ static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst,
  * task->thread.uw.fpsimd_state must be up to date before calling this
  * function.
  */
-static void fpsimd_to_sve(struct task_struct *task)
+static inline void fpsimd_to_sve(struct task_struct *task)
 {
 	unsigned int vq;
 	void *sst = task->thread.sve_state;
@@ -675,7 +676,7 @@ static void fpsimd_to_sve(struct task_struct *task)
  * bytes of allocated kernel memory.
  * task->thread.sve_state must be up to date before calling this function.
  */
-static void sve_to_fpsimd(struct task_struct *task)
+static inline void sve_to_fpsimd(struct task_struct *task)
 {
 	unsigned int vq, vl;
 	void const *sst = task->thread.sve_state;
@@ -694,44 +695,39 @@ static void sve_to_fpsimd(struct task_struct *task)
 	}
 }
 
-void cpu_enable_fpmr(const struct arm64_cpu_capabilities *__always_unused p)
+static inline void __fpsimd_zero_vregs(struct user_fpsimd_state *fpsimd)
 {
-	write_sysreg_s(read_sysreg_s(SYS_SCTLR_EL1) | SCTLR_EL1_EnFPM_MASK,
-		       SYS_SCTLR_EL1);
+	memset(&fpsimd->vregs, 0, sizeof(fpsimd->vregs));
 }
 
-#ifdef CONFIG_ARM64_SVE
 /*
- * Call __sve_free() directly only if you know task can't be scheduled
- * or preempted.
+ * Simulate the effects of an SMSTOP SM instruction.
  */
-static void __sve_free(struct task_struct *task)
+void task_smstop_sm(struct task_struct *task)
 {
-	kfree(task->thread.sve_state);
-	task->thread.sve_state = NULL;
-}
+	if (!thread_sm_enabled(&task->thread))
+		return;
 
-static void sve_free(struct task_struct *task)
-{
-	WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+	__fpsimd_zero_vregs(&task->thread.uw.fpsimd_state);
+	task->thread.uw.fpsimd_state.fpsr = 0x0800009f;
+	if (system_supports_fpmr())
+		task->thread.uw.fpmr = 0;
 
-	__sve_free(task);
+	task->thread.svcr &= ~SVCR_SM_MASK;
+	task->thread.fp_type = FP_STATE_FPSIMD;
 }
 
-/*
- * Return how many bytes of memory are required to store the full SVE
- * state for task, given task's currently configured vector length.
- */
-size_t sve_state_size(struct task_struct const *task)
+void cpu_enable_fpmr(const struct arm64_cpu_capabilities *__always_unused p)
 {
-	unsigned int vl = 0;
-
-	if (system_supports_sve())
-		vl = task_get_sve_vl(task);
-	if (system_supports_sme())
-		vl = max(vl, task_get_sme_vl(task));
+	write_sysreg_s(read_sysreg_s(SYS_SCTLR_EL1) | SCTLR_EL1_EnFPM_MASK,
+		       SYS_SCTLR_EL1);
+}
 
-	return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+#ifdef CONFIG_ARM64_SVE
+static void sve_free(struct task_struct *task)
+{
+	kfree(task->thread.sve_state);
+	task->thread.sve_state = NULL;
 }
 
 /*
@@ -758,69 +754,34 @@ void sve_alloc(struct task_struct *task, bool flush)
 		kzalloc(sve_state_size(task), GFP_KERNEL);
 }
 
-
-/*
- * Force the FPSIMD state shared with SVE to be updated in the SVE state
- * even if the SVE state is the current active state.
- *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- */
-void fpsimd_force_sync_to_sve(struct task_struct *task)
-{
-	fpsimd_to_sve(task);
-}
-
-/*
- * Ensure that task->thread.sve_state is up to date with respect to
- * the user task, irrespective of when SVE is in use or not.
- *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- */
-void fpsimd_sync_to_sve(struct task_struct *task)
-{
-	if (!test_tsk_thread_flag(task, TIF_SVE) &&
-	    !thread_sm_enabled(&task->thread))
-		fpsimd_to_sve(task);
-}
-
 /*
- * Ensure that task->thread.uw.fpsimd_state is up to date with respect to
- * the user task, irrespective of whether SVE is in use or not.
+ * Ensure that task->thread.uw.fpsimd_state is up to date with respect to the
+ * task's currently effective FPSIMD/SVE state.
  *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
+ * The task's FPSIMD/SVE/SME state must not be subject to concurrent
+ * manipulation.
  */
-void sve_sync_to_fpsimd(struct task_struct *task)
+void fpsimd_sync_from_effective_state(struct task_struct *task)
 {
 	if (task->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(task);
 }
 
 /*
- * Ensure that task->thread.sve_state is up to date with respect to
- * the task->thread.uw.fpsimd_state.
+ * Ensure that the task's currently effective FPSIMD/SVE state is up to date
+ * with respect to task->thread.uw.fpsimd_state, zeroing any effective
+ * non-FPSIMD (S)SVE state.
  *
- * This should only be called by ptrace to merge new FPSIMD register
- * values into a task for which SVE is currently active.
- * task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- * task->thread.uw.fpsimd_state must already have been initialised with
- * the new FPSIMD register values to be merged in.
+ * The task's FPSIMD/SVE/SME state must not be subject to concurrent
+ * manipulation.
  */
-void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
+void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task)
 {
 	unsigned int vq;
 	void *sst = task->thread.sve_state;
 	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
 
-	if (!test_tsk_thread_flag(task, TIF_SVE) &&
-	    !thread_sm_enabled(&task->thread))
+	if (task->thread.fp_type != FP_STATE_SVE)
 		return;
 
 	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
@@ -829,10 +790,73 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
 	__fpsimd_to_sve(sst, fst, vq);
 }
 
+static int change_live_vector_length(struct task_struct *task,
+				     enum vec_type type,
+				     unsigned long vl)
+{
+	unsigned int sve_vl = task_get_sve_vl(task);
+	unsigned int sme_vl = task_get_sme_vl(task);
+	void *sve_state = NULL, *sme_state = NULL;
+
+	if (type == ARM64_VEC_SME)
+		sme_vl = vl;
+	else
+		sve_vl = vl;
+
+	/*
+	 * Allocate the new sve_state and sme_state before freeing the old
+	 * copies so that allocation failure can be handled without needing to
+	 * mutate the task's state in any way.
+	 *
+	 * Changes to the SVE vector length must not discard live ZA state or
+	 * clear PSTATE.ZA, as userspace code which is unaware of the AAPCS64
+	 * ZA lazy saving scheme may attempt to change the SVE vector length
+	 * while unsaved/dormant ZA state exists.
+	 */
+	sve_state = kzalloc(__sve_state_size(sve_vl, sme_vl), GFP_KERNEL);
+	if (!sve_state)
+		goto out_mem;
+
+	if (type == ARM64_VEC_SME) {
+		sme_state = kzalloc(__sme_state_size(sme_vl), GFP_KERNEL);
+		if (!sme_state)
+			goto out_mem;
+	}
+
+	if (task == current)
+		fpsimd_save_and_flush_current_state();
+	else
+		fpsimd_flush_task_state(task);
+
+	/*
+	 * Always preserve PSTATE.SM and the effective FPSIMD state, zeroing
+	 * other SVE state.
+	 */
+	fpsimd_sync_from_effective_state(task);
+	task_set_vl(task, type, vl);
+	kfree(task->thread.sve_state);
+	task->thread.sve_state = sve_state;
+	fpsimd_sync_to_effective_state_zeropad(task);
+
+	if (type == ARM64_VEC_SME) {
+		task->thread.svcr &= ~SVCR_ZA_MASK;
+		kfree(task->thread.sme_state);
+		task->thread.sme_state = sme_state;
+	}
+
+	return 0;
+
+out_mem:
+	kfree(sve_state);
+	kfree(sme_state);
+	return -ENOMEM;
+}
+
 int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 			  unsigned long vl, unsigned long flags)
 {
-	bool free_sme = false;
+	bool onexec = flags & PR_SVE_SET_VL_ONEXEC;
+	bool inherit = flags & PR_SVE_VL_INHERIT;
 
 	if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
 				     PR_SVE_SET_VL_ONEXEC))
@@ -852,71 +876,17 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 
 	vl = find_supported_vector_length(type, vl);
 
-	if (flags & (PR_SVE_VL_INHERIT |
-		     PR_SVE_SET_VL_ONEXEC))
+	if (!onexec && vl != task_get_vl(task, type)) {
+		if (change_live_vector_length(task, type, vl))
+			return -ENOMEM;
+	}
+
+	if (onexec || inherit)
 		task_set_vl_onexec(task, type, vl);
 	else
 		/* Reset VL to system default on next exec: */
 		task_set_vl_onexec(task, type, 0);
 
-	/* Only actually set the VL if not deferred: */
-	if (flags & PR_SVE_SET_VL_ONEXEC)
-		goto out;
-
-	if (vl == task_get_vl(task, type))
-		goto out;
-
-	/*
-	 * To ensure the FPSIMD bits of the SVE vector registers are preserved,
-	 * write any live register state back to task_struct, and convert to a
-	 * regular FPSIMD thread.
-	 */
-	if (task == current) {
-		get_cpu_fpsimd_context();
-
-		fpsimd_save_user_state();
-	}
-
-	fpsimd_flush_task_state(task);
-	if (test_and_clear_tsk_thread_flag(task, TIF_SVE) ||
-	    thread_sm_enabled(&task->thread)) {
-		sve_to_fpsimd(task);
-		task->thread.fp_type = FP_STATE_FPSIMD;
-	}
-
-	if (system_supports_sme()) {
-		if (type == ARM64_VEC_SME ||
-		    !(task->thread.svcr & (SVCR_SM_MASK | SVCR_ZA_MASK))) {
-			/*
-			 * We are changing the SME VL or weren't using
-			 * SME anyway, discard the state and force a
-			 * reallocation.
-			 */
-			task->thread.svcr &= ~(SVCR_SM_MASK |
-					       SVCR_ZA_MASK);
-			clear_tsk_thread_flag(task, TIF_SME);
-			free_sme = true;
-		}
-	}
-
-	if (task == current)
-		put_cpu_fpsimd_context();
-
-	task_set_vl(task, type, vl);
-
-	/*
-	 * Free the changed states if they are not in use, SME will be
-	 * reallocated to the correct size on next use and we just
-	 * allocate SVE now in case it is needed for use in streaming
-	 * mode.
-	 */
-	sve_free(task);
-	sve_alloc(task, true);
-
-	if (free_sme)
-		sme_free(task);
-
-out:
 	update_tsk_thread_flag(task, vec_vl_inherit_flag(type),
 			       flags & PR_SVE_VL_INHERIT);
 
@@ -1131,15 +1101,15 @@ static void __init sve_efi_setup(void)
 	if (!sve_vl_valid(max_vl))
 		goto fail;
 
-	efi_sve_state = __alloc_percpu(
-		SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)), SVE_VQ_BYTES);
+	efi_sve_state = kmalloc(SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)),
+				GFP_KERNEL);
 	if (!efi_sve_state)
 		goto fail;
 
 	return;
 
 fail:
-	panic("Cannot allocate percpu memory for EFI SVE save/restore");
+	panic("Cannot allocate memory for EFI SVE save/restore");
 }
 
 void cpu_enable_sve(const struct arm64_cpu_capabilities *__always_unused p)
@@ -1212,7 +1182,7 @@ void __init sve_setup(void)
  */
 void fpsimd_release_task(struct task_struct *dead_task)
 {
-	__sve_free(dead_task);
+	sve_free(dead_task);
 	sme_free(dead_task);
 }
 
@@ -1436,7 +1406,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 	 * If this not a trap due to SME being disabled then something
 	 * is being used in the wrong mode, report as SIGILL.
 	 */
-	if (ESR_ELx_ISS(esr) != ESR_ELx_SME_ISS_SME_DISABLED) {
+	if (ESR_ELx_SME_ISS_SMTC(esr) != ESR_ELx_SME_ISS_SMTC_SME_DISABLED) {
 		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
 		return;
 	}
@@ -1460,6 +1430,8 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 		sme_set_vq(vq_minus_one);
 
 		fpsimd_bind_task_to_cpu();
+	} else {
+		fpsimd_flush_task_state(current);
 	}
 
 	put_cpu_fpsimd_context();
@@ -1573,8 +1545,8 @@ void fpsimd_thread_switch(struct task_struct *next)
 		fpsimd_save_user_state();
 
 	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
-		fpsimd_load_kernel_state(next);
 		fpsimd_flush_cpu_state();
+		fpsimd_load_kernel_state(next);
 	} else {
 		/*
 		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
@@ -1661,6 +1633,9 @@ void fpsimd_flush_thread(void)
 		current->thread.svcr = 0;
 	}
 
+	if (system_supports_fpmr())
+		current->thread.uw.fpmr = 0;
+
 	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	put_cpu_fpsimd_context();
@@ -1682,18 +1657,6 @@ void fpsimd_preserve_current_state(void)
 	put_cpu_fpsimd_context();
 }
 
-/*
- * Like fpsimd_preserve_current_state(), but ensure that
- * current->thread.uw.fpsimd_state is updated so that it can be copied to
- * the signal frame.
- */
-void fpsimd_signal_preserve_current_state(void)
-{
-	fpsimd_preserve_current_state();
-	if (current->thread.fp_type == FP_STATE_SVE)
-		sve_to_fpsimd(current);
-}
-
 /*
  * Associate current's FPSIMD context with this cpu
  * The caller must have ownership of the cpu FPSIMD context before calling
@@ -1786,30 +1749,14 @@ void fpsimd_restore_current_state(void)
 	put_cpu_fpsimd_context();
 }
 
-/*
- * Load an updated userland FPSIMD state for 'current' from memory and set the
- * flag that indicates that the FPSIMD register contents are the most recent
- * FPSIMD state of 'current'. This is used by the signal code to restore the
- * register state when returning from a signal handler in FPSIMD only cases,
- * any SVE context will be discarded.
- */
 void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 {
 	if (WARN_ON(!system_supports_fpsimd()))
 		return;
 
-	get_cpu_fpsimd_context();
-
 	current->thread.uw.fpsimd_state = *state;
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		fpsimd_to_sve(current);
-
-	task_fpsimd_load();
-	fpsimd_bind_task_to_cpu();
-
-	clear_thread_flag(TIF_FOREIGN_FPSTATE);
-
-	put_cpu_fpsimd_context();
 }
 
 /*
@@ -1839,6 +1786,17 @@ void fpsimd_flush_task_state(struct task_struct *t)
 	barrier();
 }
 
+void fpsimd_save_and_flush_current_state(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	get_cpu_fpsimd_context();
+	fpsimd_save_user_state();
+	fpsimd_flush_task_state(current);
+	put_cpu_fpsimd_context();
+}
+
 /*
  * Save the FPSIMD state to memory and invalidate cpu view.
  * This function must be called with preemption disabled.
@@ -1948,10 +1906,10 @@ EXPORT_SYMBOL_GPL(kernel_neon_end);
 
 #ifdef CONFIG_EFI
 
-static DEFINE_PER_CPU(struct user_fpsimd_state, efi_fpsimd_state);
-static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
-static DEFINE_PER_CPU(bool, efi_sve_state_used);
-static DEFINE_PER_CPU(bool, efi_sm_state);
+static struct user_fpsimd_state efi_fpsimd_state;
+static bool efi_fpsimd_state_used;
+static bool efi_sve_state_used;
+static bool efi_sm_state;
 
 /*
  * EFI runtime services support functions
@@ -1984,18 +1942,16 @@ void __efi_fpsimd_begin(void)
 		 * If !efi_sve_state, SVE can't be in use yet and doesn't need
 		 * preserving:
 		 */
-		if (system_supports_sve() && likely(efi_sve_state)) {
-			char *sve_state = this_cpu_ptr(efi_sve_state);
+		if (system_supports_sve() && efi_sve_state != NULL) {
 			bool ffr = true;
 			u64 svcr;
 
-			__this_cpu_write(efi_sve_state_used, true);
+			efi_sve_state_used = true;
 
 			if (system_supports_sme()) {
 				svcr = read_sysreg_s(SYS_SVCR);
 
-				__this_cpu_write(efi_sm_state,
-						 svcr & SVCR_SM_MASK);
+				efi_sm_state = svcr & SVCR_SM_MASK;
 
 				/*
 				 * Unless we have FA64 FFR does not
@@ -2005,19 +1961,18 @@ void __efi_fpsimd_begin(void)
 					ffr = !(svcr & SVCR_SM_MASK);
 			}
 
-			sve_save_state(sve_state + sve_ffr_offset(sve_max_vl()),
-				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
-				       ffr);
+			sve_save_state(efi_sve_state + sve_ffr_offset(sve_max_vl()),
+				       &efi_fpsimd_state.fpsr, ffr);
 
 			if (system_supports_sme())
 				sysreg_clear_set_s(SYS_SVCR,
 						   SVCR_SM_MASK, 0);
 
 		} else {
-			fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+			fpsimd_save_state(&efi_fpsimd_state);
 		}
 
-		__this_cpu_write(efi_fpsimd_state_used, true);
+		efi_fpsimd_state_used = true;
 	}
 }
 
@@ -2029,12 +1984,10 @@ void __efi_fpsimd_end(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) {
+	if (!efi_fpsimd_state_used) {
 		kernel_neon_end();
 	} else {
-		if (system_supports_sve() &&
-		    likely(__this_cpu_read(efi_sve_state_used))) {
-			char const *sve_state = this_cpu_ptr(efi_sve_state);
+		if (system_supports_sve() && efi_sve_state_used) {
 			bool ffr = true;
 
 			/*
@@ -2043,7 +1996,7 @@ void __efi_fpsimd_end(void)
 			 * streaming mode.
 			 */
 			if (system_supports_sme()) {
-				if (__this_cpu_read(efi_sm_state)) {
+				if (efi_sm_state) {
 					sysreg_clear_set_s(SYS_SVCR,
 							   0,
 							   SVCR_SM_MASK);
@@ -2057,14 +2010,15 @@ void __efi_fpsimd_end(void)
 				}
 			}
 
-			sve_load_state(sve_state + sve_ffr_offset(sve_max_vl()),
-				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
-				       ffr);
+			sve_load_state(efi_sve_state + sve_ffr_offset(sve_max_vl()),
+				       &efi_fpsimd_state.fpsr, ffr);
 
-			__this_cpu_write(efi_sve_state_used, false);
+			efi_sve_state_used = false;
 		} else {
-			fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
+			fpsimd_load_state(&efi_fpsimd_state);
 		}
+
+		efi_fpsimd_state_used = false;
 	}
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/head.S linux-libre-6.16-gnu/arch/arm64/kernel/head.S
index 2ce73525de2c..ca04b338cb0d 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/head.S
+++ linux-libre-6.16-gnu/arch/arm64/kernel/head.S
@@ -89,7 +89,7 @@ SYM_CODE_START(primary_entry)
 	adrp	x1, early_init_stack
 	mov	sp, x1
 	mov	x29, xzr
-	adrp	x0, init_idmap_pg_dir
+	adrp	x0, __pi_init_idmap_pg_dir
 	mov	x1, xzr
 	bl	__pi_create_init_idmap
 
@@ -101,7 +101,7 @@ SYM_CODE_START(primary_entry)
 	cbnz	x19, 0f
 	dmb     sy
 	mov	x1, x0				// end of used region
-	adrp    x0, init_idmap_pg_dir
+	adrp    x0, __pi_init_idmap_pg_dir
 	adr_l	x2, dcache_inval_poc
 	blr	x2
 	b	1f
@@ -507,7 +507,7 @@ SYM_FUNC_END(__no_granule_support)
 
 SYM_FUNC_START_LOCAL(__primary_switch)
 	adrp	x1, reserved_pg_dir
-	adrp	x2, init_idmap_pg_dir
+	adrp	x2, __pi_init_idmap_pg_dir
 	bl	__enable_mmu
 
 	adrp	x1, early_init_stack
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/hyp-stub.S linux-libre-6.16-gnu/arch/arm64/kernel/hyp-stub.S
index ae990da1eae5..36e2d26b54f5 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/hyp-stub.S
+++ linux-libre-6.16-gnu/arch/arm64/kernel/hyp-stub.S
@@ -97,7 +97,7 @@ SYM_CODE_START_LOCAL(__finalise_el2)
 2:
 	// Engage the VHE magic!
 	mov_q	x0, HCR_HOST_VHE_FLAGS
-	msr	hcr_el2, x0
+	msr_hcr_el2 x0
 	isb
 
 	// Use the EL1 allocated stack, per-cpu offset
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/image-vars.h linux-libre-6.16-gnu/arch/arm64/kernel/image-vars.h
index 2004b4f41ade..714b0b5ec5ac 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/image-vars.h
+++ linux-libre-6.16-gnu/arch/arm64/kernel/image-vars.h
@@ -10,6 +10,16 @@
 #error This file should only be included in vmlinux.lds.S
 #endif
 
+#if defined(CONFIG_LD_IS_LLD) && CONFIG_LLD_VERSION < 210000
+#define ASSERT(...)
+#endif
+
+#define PI_EXPORT_SYM(sym)		\
+	__PI_EXPORT_SYM(sym, __pi_ ## sym, Cannot export BSS symbol sym to startup code)
+#define __PI_EXPORT_SYM(sym, pisym, msg)\
+	PROVIDE(pisym = sym);		\
+	ASSERT((sym - KIMAGE_VADDR) < (__bss_start - KIMAGE_VADDR), #msg)
+
 PROVIDE(__efistub_primary_entry		= primary_entry);
 
 /*
@@ -36,37 +46,30 @@ PROVIDE(__pi___memcpy			= __pi_memcpy);
 PROVIDE(__pi___memmove			= __pi_memmove);
 PROVIDE(__pi___memset			= __pi_memset);
 
-PROVIDE(__pi_id_aa64isar1_override	= id_aa64isar1_override);
-PROVIDE(__pi_id_aa64isar2_override	= id_aa64isar2_override);
-PROVIDE(__pi_id_aa64mmfr0_override	= id_aa64mmfr0_override);
-PROVIDE(__pi_id_aa64mmfr1_override	= id_aa64mmfr1_override);
-PROVIDE(__pi_id_aa64mmfr2_override	= id_aa64mmfr2_override);
-PROVIDE(__pi_id_aa64pfr0_override	= id_aa64pfr0_override);
-PROVIDE(__pi_id_aa64pfr1_override	= id_aa64pfr1_override);
-PROVIDE(__pi_id_aa64smfr0_override	= id_aa64smfr0_override);
-PROVIDE(__pi_id_aa64zfr0_override	= id_aa64zfr0_override);
-PROVIDE(__pi_arm64_sw_feature_override	= arm64_sw_feature_override);
-PROVIDE(__pi_arm64_use_ng_mappings	= arm64_use_ng_mappings);
-PROVIDE(__pi__ctype			= _ctype);
-PROVIDE(__pi_memstart_offset_seed	= memstart_offset_seed);
-
-PROVIDE(__pi_init_idmap_pg_dir		= init_idmap_pg_dir);
-PROVIDE(__pi_init_idmap_pg_end		= init_idmap_pg_end);
-PROVIDE(__pi_init_pg_dir		= init_pg_dir);
-PROVIDE(__pi_init_pg_end		= init_pg_end);
-PROVIDE(__pi_swapper_pg_dir		= swapper_pg_dir);
-
-PROVIDE(__pi__text			= _text);
-PROVIDE(__pi__stext               	= _stext);
-PROVIDE(__pi__etext               	= _etext);
-PROVIDE(__pi___start_rodata       	= __start_rodata);
-PROVIDE(__pi___inittext_begin     	= __inittext_begin);
-PROVIDE(__pi___inittext_end       	= __inittext_end);
-PROVIDE(__pi___initdata_begin     	= __initdata_begin);
-PROVIDE(__pi___initdata_end       	= __initdata_end);
-PROVIDE(__pi__data                	= _data);
-PROVIDE(__pi___bss_start		= __bss_start);
-PROVIDE(__pi__end			= _end);
+PI_EXPORT_SYM(id_aa64isar1_override);
+PI_EXPORT_SYM(id_aa64isar2_override);
+PI_EXPORT_SYM(id_aa64mmfr0_override);
+PI_EXPORT_SYM(id_aa64mmfr1_override);
+PI_EXPORT_SYM(id_aa64mmfr2_override);
+PI_EXPORT_SYM(id_aa64pfr0_override);
+PI_EXPORT_SYM(id_aa64pfr1_override);
+PI_EXPORT_SYM(id_aa64smfr0_override);
+PI_EXPORT_SYM(id_aa64zfr0_override);
+PI_EXPORT_SYM(arm64_sw_feature_override);
+PI_EXPORT_SYM(arm64_use_ng_mappings);
+PI_EXPORT_SYM(_ctype);
+
+PI_EXPORT_SYM(swapper_pg_dir);
+
+PI_EXPORT_SYM(_text);
+PI_EXPORT_SYM(_stext);
+PI_EXPORT_SYM(_etext);
+PI_EXPORT_SYM(__start_rodata);
+PI_EXPORT_SYM(__inittext_begin);
+PI_EXPORT_SYM(__inittext_end);
+PI_EXPORT_SYM(__initdata_begin);
+PI_EXPORT_SYM(__initdata_end);
+PI_EXPORT_SYM(_data);
 
 #ifdef CONFIG_KVM
 
@@ -127,6 +130,8 @@ KVM_NVHE_ALIAS(__hyp_text_start);
 KVM_NVHE_ALIAS(__hyp_text_end);
 KVM_NVHE_ALIAS(__hyp_bss_start);
 KVM_NVHE_ALIAS(__hyp_bss_end);
+KVM_NVHE_ALIAS(__hyp_data_start);
+KVM_NVHE_ALIAS(__hyp_data_end);
 KVM_NVHE_ALIAS(__hyp_rodata_start);
 KVM_NVHE_ALIAS(__hyp_rodata_end);
 
@@ -139,4 +144,17 @@ KVM_NVHE_ALIAS(kvm_protected_mode_initialized);
 _kernel_codesize = ABSOLUTE(__inittext_end - _text);
 #endif
 
+/*
+ * LLD will occasionally error out with a '__init_end does not converge' error
+ * if INIT_IDMAP_DIR_SIZE is defined in terms of _end, as this results in a
+ * circular dependency. Counter this by dimensioning the initial IDMAP page
+ * tables based on kimage_limit, which is defined such that its value should
+ * not change as a result of the initdata segment being pushed over a 64k
+ * segment boundary due to changes in INIT_IDMAP_DIR_SIZE, provided that its
+ * value doesn't change by more than 2M between linker passes.
+ */
+kimage_limit = ALIGN(ABSOLUTE(_end + SZ_64K), SZ_2M);
+
+#undef ASSERT
+
 #endif /* __ARM64_KERNEL_IMAGE_VARS_H */
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/kaslr.c linux-libre-6.16-gnu/arch/arm64/kernel/kaslr.c
index 1da3e25f9d9e..c9503ed45a6c 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/kaslr.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/kaslr.c
@@ -10,8 +10,6 @@
 #include <asm/cpufeature.h>
 #include <asm/memory.h>
 
-u16 __initdata memstart_offset_seed;
-
 bool __ro_after_init __kaslr_is_enabled = false;
 
 void __init kaslr_init(void)
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/pi/idreg-override.c linux-libre-6.16-gnu/arch/arm64/kernel/pi/idreg-override.c
index c6b185b885f7..bc57b290e5e7 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/pi/idreg-override.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/pi/idreg-override.c
@@ -127,6 +127,7 @@ static const struct ftr_set_desc pfr0 __prel64_initconst = {
 	.fields		= {
 	        FIELD("sve", ID_AA64PFR0_EL1_SVE_SHIFT, pfr0_sve_filter),
 		FIELD("el0", ID_AA64PFR0_EL1_EL0_SHIFT, NULL),
+		FIELD("mpam", ID_AA64PFR0_EL1_MPAM_SHIFT, NULL),
 		{}
 	},
 };
@@ -154,6 +155,7 @@ static const struct ftr_set_desc pfr1 __prel64_initconst = {
 		FIELD("gcs", ID_AA64PFR1_EL1_GCS_SHIFT, NULL),
 		FIELD("mte", ID_AA64PFR1_EL1_MTE_SHIFT, NULL),
 		FIELD("sme", ID_AA64PFR1_EL1_SME_SHIFT, pfr1_sme_filter),
+		FIELD("mpam_frac", ID_AA64PFR1_EL1_MPAM_frac_SHIFT, NULL),
 		{}
 	},
 };
@@ -246,6 +248,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nompam",		"id_aa64pfr0.mpam=0 id_aa64pfr1.mpam_frac=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/pi/kaslr_early.c linux-libre-6.16-gnu/arch/arm64/kernel/pi/kaslr_early.c
index 0257b43819db..e0e018046a46 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/pi/kaslr_early.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/pi/kaslr_early.c
@@ -18,8 +18,6 @@
 
 #include "pi.h"
 
-extern u16 memstart_offset_seed;
-
 static u64 __init get_kaslr_seed(void *fdt, int node)
 {
 	static char const seed_str[] __initconst = "kaslr-seed";
@@ -53,8 +51,6 @@ u64 __init kaslr_early_init(void *fdt, int chosen)
 			return 0;
 	}
 
-	memstart_offset_seed = seed & U16_MAX;
-
 	/*
 	 * OK, so we are proceeding with KASLR enabled. Calculate a suitable
 	 * kernel image offset from the seed. Let's place the kernel in the
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/pi/map_kernel.c linux-libre-6.16-gnu/arch/arm64/kernel/pi/map_kernel.c
index c6650cfe706c..0f4bd7771859 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/pi/map_kernel.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/pi/map_kernel.c
@@ -159,7 +159,7 @@ static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(u64 ttbr)
 static void __init remap_idmap_for_lpa2(void)
 {
 	/* clear the bits that change meaning once LPA2 is turned on */
-	pteval_t mask = PTE_SHARED;
+	ptdesc_t mask = PTE_SHARED;
 
 	/*
 	 * We have to clear bits [9:8] in all block or page descriptors in the
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/pi/map_range.c linux-libre-6.16-gnu/arch/arm64/kernel/pi/map_range.c
index 81345f68f9fc..7982788e7b9a 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/pi/map_range.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/pi/map_range.c
@@ -30,7 +30,7 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
 		      int level, pte_t *tbl, bool may_use_cont, u64 va_offset)
 {
 	u64 cmask = (level == 3) ? CONT_PTE_SIZE - 1 : U64_MAX;
-	pteval_t protval = pgprot_val(prot) & ~PTE_TYPE_MASK;
+	ptdesc_t protval = pgprot_val(prot) & ~PTE_TYPE_MASK;
 	int lshift = (3 - level) * PTDESC_TABLE_SHIFT;
 	u64 lmask = (PAGE_SIZE << lshift) - 1;
 
@@ -87,7 +87,7 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
 	}
 }
 
-asmlinkage u64 __init create_init_idmap(pgd_t *pg_dir, pteval_t clrmask)
+asmlinkage u64 __init create_init_idmap(pgd_t *pg_dir, ptdesc_t clrmask)
 {
 	u64 ptep = (u64)pg_dir + PAGE_SIZE;
 	pgprot_t text_prot = PAGE_KERNEL_ROX;
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/pi/pi.h linux-libre-6.16-gnu/arch/arm64/kernel/pi/pi.h
index c91e5e965cd3..46cafee7829f 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/pi/pi.h
+++ linux-libre-6.16-gnu/arch/arm64/kernel/pi/pi.h
@@ -22,6 +22,7 @@ static inline void *prel64_to_pointer(const prel64_t *offset)
 extern bool dynamic_scs_is_enabled;
 
 extern pgd_t init_idmap_pg_dir[], init_idmap_pg_end[];
+extern pgd_t init_pg_dir[], init_pg_end[];
 
 void init_feature_override(u64 boot_status, const void *fdt, int chosen);
 u64 kaslr_early_init(void *fdt, int chosen);
@@ -33,4 +34,4 @@ void map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
 
 asmlinkage void early_map_kernel(u64 boot_status, void *fdt);
 
-asmlinkage u64 create_init_idmap(pgd_t *pgd, pteval_t clrmask);
+asmlinkage u64 create_init_idmap(pgd_t *pgd, ptdesc_t clrmask);
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/process.c linux-libre-6.16-gnu/arch/arm64/kernel/process.c
index 42faebb7b712..08b7042a2e2d 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/process.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/process.c
@@ -288,7 +288,9 @@ static void flush_gcs(void)
 	if (!system_supports_gcs())
 		return;
 
-	gcs_free(current);
+	current->thread.gcspr_el0 = 0;
+	current->thread.gcs_base = 0;
+	current->thread.gcs_size = 0;
 	current->thread.gcs_el0_mode = 0;
 	write_sysreg_s(GCSCRE0_EL1_nTR, SYS_GCSCRE0_EL1);
 	write_sysreg_s(0, SYS_GCSPR_EL0);
@@ -344,50 +346,34 @@ void arch_release_task_struct(struct task_struct *tsk)
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	if (current->mm)
-		fpsimd_preserve_current_state();
+	/*
+	 * The current/src task's FPSIMD state may or may not be live, and may
+	 * have been altered by ptrace after entry to the kernel. Save the
+	 * effective FPSIMD state so that this will be copied into dst.
+	 */
+	fpsimd_save_and_flush_current_state();
+	fpsimd_sync_from_effective_state(src);
+
 	*dst = *src;
 
 	/*
-	 * Detach src's sve_state (if any) from dst so that it does not
-	 * get erroneously used or freed prematurely.  dst's copies
-	 * will be allocated on demand later on if dst uses SVE.
-	 * For consistency, also clear TIF_SVE here: this could be done
-	 * later in copy_process(), but to avoid tripping up future
-	 * maintainers it is best not to leave TIF flags and buffers in
-	 * an inconsistent state, even temporarily.
+	 * Drop stale reference to src's sve_state and convert dst to
+	 * non-streaming FPSIMD mode.
 	 */
+	dst->thread.fp_type = FP_STATE_FPSIMD;
 	dst->thread.sve_state = NULL;
 	clear_tsk_thread_flag(dst, TIF_SVE);
+	task_smstop_sm(dst);
 
 	/*
-	 * In the unlikely event that we create a new thread with ZA
-	 * enabled we should retain the ZA and ZT state so duplicate
-	 * it here.  This may be shortly freed if we exec() or if
-	 * CLONE_SETTLS but it's simpler to do it here. To avoid
-	 * confusing the rest of the code ensure that we have a
-	 * sve_state allocated whenever sme_state is allocated.
+	 * Drop stale reference to src's sme_state and ensure dst has ZA
+	 * disabled.
+	 *
+	 * When necessary, ZA will be inherited later in copy_thread_za().
 	 */
-	if (thread_za_enabled(&src->thread)) {
-		dst->thread.sve_state = kzalloc(sve_state_size(src),
-						GFP_KERNEL);
-		if (!dst->thread.sve_state)
-			return -ENOMEM;
-
-		dst->thread.sme_state = kmemdup(src->thread.sme_state,
-						sme_state_size(src),
-						GFP_KERNEL);
-		if (!dst->thread.sme_state) {
-			kfree(dst->thread.sve_state);
-			dst->thread.sve_state = NULL;
-			return -ENOMEM;
-		}
-	} else {
-		dst->thread.sme_state = NULL;
-		clear_tsk_thread_flag(dst, TIF_SME);
-	}
-
-	dst->thread.fp_type = FP_STATE_FPSIMD;
+	dst->thread.sme_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SME);
+	dst->thread.svcr &= ~SVCR_ZA_MASK;
 
 	/* clear any pending asynchronous tag fault raised by the parent */
 	clear_tsk_thread_flag(dst, TIF_MTE_ASYNC_FAULT);
@@ -395,6 +381,31 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
+static int copy_thread_za(struct task_struct *dst, struct task_struct *src)
+{
+	if (!thread_za_enabled(&src->thread))
+		return 0;
+
+	dst->thread.sve_state = kzalloc(sve_state_size(src),
+					GFP_KERNEL);
+	if (!dst->thread.sve_state)
+		return -ENOMEM;
+
+	dst->thread.sme_state = kmemdup(src->thread.sme_state,
+					sme_state_size(src),
+					GFP_KERNEL);
+	if (!dst->thread.sme_state) {
+		kfree(dst->thread.sve_state);
+		dst->thread.sve_state = NULL;
+		return -ENOMEM;
+	}
+
+	set_tsk_thread_flag(dst, TIF_SME);
+	dst->thread.svcr |= SVCR_ZA_MASK;
+
+	return 0;
+}
+
 asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
@@ -427,8 +438,6 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		 * out-of-sync with the saved value.
 		 */
 		*task_user_tls(p) = read_sysreg(tpidr_el0);
-		if (system_supports_tpidr2())
-			p->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
 
 		if (system_supports_poe())
 			p->thread.por_el0 = read_sysreg_s(SYS_POR_EL0);
@@ -440,14 +449,40 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 				childregs->sp = stack_start;
 		}
 
+		/*
+		 * Due to the AAPCS64 "ZA lazy saving scheme", PSTATE.ZA and
+		 * TPIDR2 need to be manipulated as a pair, and either both
+		 * need to be inherited or both need to be reset.
+		 *
+		 * Within a process, child threads must not inherit their
+		 * parent's TPIDR2 value or they may clobber their parent's
+		 * stack at some later point.
+		 *
+		 * When a process is fork()'d, the child must inherit ZA and
+		 * TPIDR2 from its parent in case there was dormant ZA state.
+		 *
+		 * Use CLONE_VM to determine when the child will share the
+		 * address space with the parent, and cannot safely inherit the
+		 * state.
+		 */
+		if (system_supports_sme()) {
+			if (!(clone_flags & CLONE_VM)) {
+				p->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
+				ret = copy_thread_za(p, current);
+				if (ret)
+					return ret;
+			} else {
+				p->thread.tpidr2_el0 = 0;
+				WARN_ON_ONCE(p->thread.svcr & SVCR_ZA_MASK);
+			}
+		}
+
 		/*
 		 * If a TLS pointer was passed to clone, use it for the new
-		 * thread.  We also reset TPIDR2 if it's in use.
+		 * thread.
 		 */
-		if (clone_flags & CLONE_SETTLS) {
+		if (clone_flags & CLONE_SETTLS)
 			p->thread.uw.tp_value = tls;
-			p->thread.tpidr2_el0 = 0;
-		}
 
 		ret = copy_thread_gcs(p, args);
 		if (ret != 0)
@@ -638,6 +673,11 @@ static void permission_overlay_switch(struct task_struct *next)
 	current->thread.por_el0 = read_sysreg_s(SYS_POR_EL0);
 	if (current->thread.por_el0 != next->thread.por_el0) {
 		write_sysreg_s(next->thread.por_el0, SYS_POR_EL0);
+		/*
+		 * No ISB required as we can tolerate spurious Overlay faults -
+		 * the fault handler will check again based on the new value
+		 * of POR_EL0.
+		 */
 	}
 }
 
@@ -680,10 +720,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	gcs_thread_switch(next);
 
 	/*
-	 * Complete any pending TLB or cache maintenance on this CPU in case
-	 * the thread migrates to a different CPU.
-	 * This full barrier is also required by the membarrier system
-	 * call.
+	 * Complete any pending TLB or cache maintenance on this CPU in case the
+	 * thread migrates to a different CPU. This full barrier is also
+	 * required by the membarrier system call. Additionally it makes any
+	 * in-progress pgtable writes visible to the table walker; See
+	 * emit_pte_barriers().
 	 */
 	dsb(ish);
 
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/ptrace.c linux-libre-6.16-gnu/arch/arm64/kernel/ptrace.c
index f79b0d5f71ac..ee94b72bf8fb 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/ptrace.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/ptrace.c
@@ -141,7 +141,7 @@ unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
 
 	addr += n;
 	if (regs_within_kernel_stack(regs, (unsigned long)addr))
-		return *addr;
+		return READ_ONCE_NOCHECK(*addr);
 	else
 		return 0;
 }
@@ -594,7 +594,7 @@ static int __fpr_get(struct task_struct *target,
 {
 	struct user_fpsimd_state *uregs;
 
-	sve_sync_to_fpsimd(target);
+	fpsimd_sync_from_effective_state(target);
 
 	uregs = &target->thread.uw.fpsimd_state;
 
@@ -626,7 +626,7 @@ static int __fpr_set(struct task_struct *target,
 	 * Ensure target->thread.uw.fpsimd_state is up to date, so that a
 	 * short copyin can't resurrect stale data.
 	 */
-	sve_sync_to_fpsimd(target);
+	fpsimd_sync_from_effective_state(target);
 
 	newstate = target->thread.uw.fpsimd_state;
 
@@ -653,7 +653,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
-	sve_sync_from_fpsimd_zeropad(target);
+	fpsimd_sync_to_effective_state_zeropad(target);
 	fpsimd_flush_task_state(target);
 
 	return ret;
@@ -775,6 +775,11 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 		task_type = ARM64_VEC_SVE;
 	active = (task_type == type);
 
+	if (active && target->thread.fp_type == FP_STATE_SVE)
+		header->flags = SVE_PT_REGS_SVE;
+	else
+		header->flags = SVE_PT_REGS_FPSIMD;
+
 	switch (type) {
 	case ARM64_VEC_SVE:
 		if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
@@ -789,19 +794,14 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 		return;
 	}
 
-	if (active) {
-		if (target->thread.fp_type == FP_STATE_FPSIMD) {
-			header->flags |= SVE_PT_REGS_FPSIMD;
-		} else {
-			header->flags |= SVE_PT_REGS_SVE;
-		}
-	}
-
 	header->vl = task_get_vl(target, type);
 	vq = sve_vq_from_vl(header->vl);
 
 	header->max_vl = vec_max_vl(type);
-	header->size = SVE_PT_SIZE(vq, header->flags);
+	if (active)
+		header->size = SVE_PT_SIZE(vq, header->flags);
+	else
+		header->size = sizeof(header);
 	header->max_size = SVE_PT_SIZE(sve_vq_from_vl(header->max_vl),
 				      SVE_PT_REGS_SVE);
 }
@@ -820,18 +820,25 @@ static int sve_get_common(struct task_struct *target,
 	unsigned int vq;
 	unsigned long start, end;
 
+	if (target == current)
+		fpsimd_preserve_current_state();
+
 	/* Header */
 	sve_init_header_from_task(&header, target, type);
 	vq = sve_vq_from_vl(header.vl);
 
 	membuf_write(&to, &header, sizeof(header));
 
-	if (target == current)
-		fpsimd_preserve_current_state();
-
 	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 
+	/*
+	 * When the requested vector type is not active, do not present data
+	 * from the other mode to userspace.
+	 */
+	if (header.size == sizeof(header))
+		return 0;
+
 	switch ((header.flags & SVE_PT_REGS_MASK)) {
 	case SVE_PT_REGS_FPSIMD:
 		return __fpr_get(target, regset, to);
@@ -859,7 +866,7 @@ static int sve_get_common(struct task_struct *target,
 		return membuf_zero(&to, end - start);
 
 	default:
-		return 0;
+		BUILD_BUG();
 	}
 }
 
@@ -883,6 +890,9 @@ static int sve_set_common(struct task_struct *target,
 	struct user_sve_header header;
 	unsigned int vq;
 	unsigned long start, end;
+	bool fpsimd;
+
+	fpsimd_flush_task_state(target);
 
 	/* Header */
 	if (count < sizeof(header))
@@ -890,7 +900,16 @@ static int sve_set_common(struct task_struct *target,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
 				 0, sizeof(header));
 	if (ret)
-		goto out;
+		return ret;
+
+	/*
+	 * Streaming SVE data is always stored and presented in SVE format.
+	 * Require the user to provide SVE formatted data for consistency, and
+	 * to avoid the risk that we configure the task into an invalid state.
+	 */
+	fpsimd = (header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD;
+	if (fpsimd && type == ARM64_VEC_SME)
+		return -EINVAL;
 
 	/*
 	 * Apart from SVE_PT_REGS_MASK, all SVE_PT_* flags are consumed by
@@ -899,7 +918,21 @@ static int sve_set_common(struct task_struct *target,
 	ret = vec_set_vector_length(target, type, header.vl,
 		((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
 	if (ret)
-		goto out;
+		return ret;
+
+	/* Allocate SME storage if necessary, preserving any existing ZA/ZT state */
+	if (type == ARM64_VEC_SME) {
+		sme_alloc(target, false);
+		if (!target->thread.sme_state)
+			return -ENOMEM;
+	}
+
+	/* Allocate SVE storage if necessary, zeroing any existing SVE state */
+	if (!fpsimd) {
+		sve_alloc(target, true);
+		if (!target->thread.sve_state)
+			return -ENOMEM;
+	}
 
 	/*
 	 * Actual VL set may be different from what the user asked
@@ -910,81 +943,47 @@ static int sve_set_common(struct task_struct *target,
 
 	/* Enter/exit streaming mode */
 	if (system_supports_sme()) {
-		u64 old_svcr = target->thread.svcr;
-
 		switch (type) {
 		case ARM64_VEC_SVE:
 			target->thread.svcr &= ~SVCR_SM_MASK;
+			set_tsk_thread_flag(target, TIF_SVE);
 			break;
 		case ARM64_VEC_SME:
 			target->thread.svcr |= SVCR_SM_MASK;
-
-			/*
-			 * Disable traps and ensure there is SME storage but
-			 * preserve any currently set values in ZA/ZT.
-			 */
-			sme_alloc(target, false);
 			set_tsk_thread_flag(target, TIF_SME);
 			break;
 		default:
 			WARN_ON_ONCE(1);
-			ret = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
-
-		/*
-		 * If we switched then invalidate any existing SVE
-		 * state and ensure there's storage.
-		 */
-		if (target->thread.svcr != old_svcr)
-			sve_alloc(target, true);
 	}
 
+	/* Always zero V regs, FPSR, and FPCR */
+	memset(&current->thread.uw.fpsimd_state, 0,
+	       sizeof(current->thread.uw.fpsimd_state));
+
 	/* Registers: FPSIMD-only case */
 
 	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
-	if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD) {
-		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
-				SVE_PT_FPSIMD_OFFSET);
+	if (fpsimd) {
 		clear_tsk_thread_flag(target, TIF_SVE);
 		target->thread.fp_type = FP_STATE_FPSIMD;
-		goto out;
+		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
+				SVE_PT_FPSIMD_OFFSET);
+		return ret;
 	}
 
-	/*
-	 * Otherwise: no registers or full SVE case.  For backwards
-	 * compatibility reasons we treat empty flags as SVE registers.
-	 */
+	/* Otherwise: no registers or full SVE case. */
+
+	target->thread.fp_type = FP_STATE_SVE;
 
 	/*
 	 * If setting a different VL from the requested VL and there is
 	 * register data, the data layout will be wrong: don't even
 	 * try to set the registers in this case.
 	 */
-	if (count && vq != sve_vq_from_vl(header.vl)) {
-		ret = -EIO;
-		goto out;
-	}
-
-	sve_alloc(target, true);
-	if (!target->thread.sve_state) {
-		ret = -ENOMEM;
-		clear_tsk_thread_flag(target, TIF_SVE);
-		target->thread.fp_type = FP_STATE_FPSIMD;
-		goto out;
-	}
-
-	/*
-	 * Ensure target->thread.sve_state is up to date with target's
-	 * FPSIMD regs, so that a short copyin leaves trailing
-	 * registers unmodified.  Only enable SVE if we are
-	 * configuring normal SVE, a system with streaming SVE may not
-	 * have normal SVE.
-	 */
-	fpsimd_sync_to_sve(target);
-	if (type == ARM64_VEC_SVE)
-		set_tsk_thread_flag(target, TIF_SVE);
-	target->thread.fp_type = FP_STATE_SVE;
+	if (count && vq != sve_vq_from_vl(header.vl))
+		return -EIO;
 
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 	start = SVE_PT_SVE_OFFSET;
@@ -993,7 +992,7 @@ static int sve_set_common(struct task_struct *target,
 				 target->thread.sve_state,
 				 start, end);
 	if (ret)
-		goto out;
+		return ret;
 
 	start = end;
 	end = SVE_PT_SVE_FPSR_OFFSET(vq);
@@ -1009,8 +1008,6 @@ static int sve_set_common(struct task_struct *target,
 				 &target->thread.uw.fpsimd_state.fpsr,
 				 start, end);
 
-out:
-	fpsimd_flush_task_state(target);
 	return ret;
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/setup.c linux-libre-6.16-gnu/arch/arm64/kernel/setup.c
index 85104587f849..77c7926a4df6 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/setup.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/setup.c
@@ -169,7 +169,7 @@ static void __init smp_build_mpidr_hash(void)
 
 static void __init setup_machine_fdt(phys_addr_t dt_phys)
 {
-	int size;
+	int size = 0;
 	void *dt_virt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL);
 	const char *name;
 
@@ -182,10 +182,10 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	 */
 	if (!early_init_dt_scan(dt_virt, dt_phys)) {
 		pr_crit("\n"
-			"Error: invalid device tree blob at physical address %pa (virtual address 0x%px)\n"
-			"The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"
-			"\nPlease check your bootloader.",
-			&dt_phys, dt_virt);
+			"Error: invalid device tree blob: PA=%pa, VA=%px, size=%d bytes\n"
+			"The dtb must be 8-byte aligned and must not exceed 2 MB in size.\n"
+			"\nPlease check your bootloader.\n",
+			&dt_phys, dt_virt, size);
 
 		/*
 		 * Note that in this _really_ early stage we cannot even BUG()
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/signal.c linux-libre-6.16-gnu/arch/arm64/kernel/signal.c
index a7c37afb4ebe..417140cd399b 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/signal.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/signal.c
@@ -250,6 +250,8 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
 		&current->thread.uw.fpsimd_state;
 	int err;
 
+	fpsimd_sync_from_effective_state(current);
+
 	/* copy the FP and status/control registers */
 	err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
 	__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
@@ -262,37 +264,46 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
 	return err ? -EFAULT : 0;
 }
 
-static int restore_fpsimd_context(struct user_ctxs *user)
+static int read_fpsimd_context(struct user_fpsimd_state *fpsimd,
+			       struct user_ctxs *user)
 {
-	struct user_fpsimd_state fpsimd;
-	int err = 0;
+	int err;
 
 	/* check the size information */
 	if (user->fpsimd_size != sizeof(struct fpsimd_context))
 		return -EINVAL;
 
 	/* copy the FP and status/control registers */
-	err = __copy_from_user(fpsimd.vregs, &(user->fpsimd->vregs),
-			       sizeof(fpsimd.vregs));
-	__get_user_error(fpsimd.fpsr, &(user->fpsimd->fpsr), err);
-	__get_user_error(fpsimd.fpcr, &(user->fpsimd->fpcr), err);
+	err = __copy_from_user(fpsimd->vregs, &(user->fpsimd->vregs),
+			       sizeof(fpsimd->vregs));
+	__get_user_error(fpsimd->fpsr, &(user->fpsimd->fpsr), err);
+	__get_user_error(fpsimd->fpcr, &(user->fpsimd->fpcr), err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_fpsimd_context(struct user_ctxs *user)
+{
+	struct user_fpsimd_state fpsimd;
+	int err;
+
+	err = read_fpsimd_context(&fpsimd, user);
+	if (err)
+		return err;
 
 	clear_thread_flag(TIF_SVE);
+	current->thread.svcr &= ~SVCR_SM_MASK;
 	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	/* load the hardware registers from the fpsimd_state structure */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
-
-	return err ? -EFAULT : 0;
+	fpsimd_update_current_state(&fpsimd);
+	return 0;
 }
 
 static int preserve_fpmr_context(struct fpmr_context __user *ctx)
 {
 	int err = 0;
 
-	current->thread.uw.fpmr = read_sysreg_s(SYS_FPMR);
-
 	__put_user_error(FPMR_MAGIC, &ctx->head.magic, err);
 	__put_user_error(sizeof(*ctx), &ctx->head.size, err);
 	__put_user_error(current->thread.uw.fpmr, &ctx->fpmr, err);
@@ -310,7 +321,7 @@ static int restore_fpmr_context(struct user_ctxs *user)
 
 	__get_user_error(fpmr, &user->fpmr->fpmr, err);
 	if (!err)
-		write_sysreg_s(fpmr, SYS_FPMR);
+		current->thread.uw.fpmr = fpmr;
 
 	return err;
 }
@@ -372,11 +383,6 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
 	if (vq) {
-		/*
-		 * This assumes that the SVE state has already been saved to
-		 * the task struct by calling the function
-		 * fpsimd_signal_preserve_current_state().
-		 */
 		err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
 				      current->thread.sve_state,
 				      SVE_SIG_REGS_SIZE(vq));
@@ -391,6 +397,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	unsigned int vl, vq;
 	struct user_fpsimd_state fpsimd;
 	u16 user_vl, flags;
+	bool sm;
 
 	if (user->sve_size < sizeof(*user->sve))
 		return -EINVAL;
@@ -400,7 +407,8 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	if (err)
 		return err;
 
-	if (flags & SVE_SIG_FLAG_SM) {
+	sm = flags & SVE_SIG_FLAG_SM;
+	if (sm) {
 		if (!system_supports_sme())
 			return -EINVAL;
 
@@ -420,28 +428,23 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	if (user_vl != vl)
 		return -EINVAL;
 
-	if (user->sve_size == sizeof(*user->sve)) {
-		clear_thread_flag(TIF_SVE);
-		current->thread.svcr &= ~SVCR_SM_MASK;
-		current->thread.fp_type = FP_STATE_FPSIMD;
-		goto fpsimd_only;
-	}
+	/*
+	 * Non-streaming SVE state may be preserved without an SVE payload, in
+	 * which case the SVE context only has a header with VL==0, and all
+	 * state can be restored from the FPSIMD context.
+	 *
+	 * Streaming SVE state is always preserved with an SVE payload. For
+	 * consistency and robustness, reject restoring streaming SVE state
+	 * without an SVE payload.
+	 */
+	if (!sm && user->sve_size == sizeof(*user->sve))
+		return restore_fpsimd_context(user);
 
 	vq = sve_vq_from_vl(vl);
 
 	if (user->sve_size < SVE_SIG_CONTEXT_SIZE(vq))
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.sve_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
-
 	sve_alloc(current, true);
 	if (!current->thread.sve_state) {
 		clear_thread_flag(TIF_SVE);
@@ -461,19 +464,14 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 		set_thread_flag(TIF_SVE);
 	current->thread.fp_type = FP_STATE_SVE;
 
-fpsimd_only:
-	/* copy the FP and status/control registers */
-	/* restore_sigframe() already checked that user->fpsimd != NULL. */
-	err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
-			       sizeof(fpsimd.vregs));
-	__get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
-	__get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+	err = read_fpsimd_context(&fpsimd, user);
+	if (err)
+		return err;
 
-	/* load the hardware registers from the fpsimd_state structure */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
+	/* Merge the FPSIMD registers into the SVE state */
+	fpsimd_update_current_state(&fpsimd);
 
-	return err ? -EFAULT : 0;
+	return 0;
 }
 
 #else /* ! CONFIG_ARM64_SVE */
@@ -493,13 +491,12 @@ extern int preserve_sve_context(void __user *ctx);
 
 static int preserve_tpidr2_context(struct tpidr2_context __user *ctx)
 {
+	u64 tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
 	int err = 0;
 
-	current->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
-
 	__put_user_error(TPIDR2_MAGIC, &ctx->head.magic, err);
 	__put_user_error(sizeof(*ctx), &ctx->head.size, err);
-	__put_user_error(current->thread.tpidr2_el0, &ctx->tpidr2, err);
+	__put_user_error(tpidr2_el0, &ctx->tpidr2, err);
 
 	return err;
 }
@@ -541,11 +538,6 @@ static int preserve_za_context(struct za_context __user *ctx)
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
 	if (vq) {
-		/*
-		 * This assumes that the ZA state has already been saved to
-		 * the task struct by calling the function
-		 * fpsimd_signal_preserve_current_state().
-		 */
 		err |= __copy_to_user((char __user *)ctx + ZA_SIG_REGS_OFFSET,
 				      current->thread.sme_state,
 				      ZA_SIG_REGS_SIZE(vq));
@@ -580,16 +572,6 @@ static int restore_za_context(struct user_ctxs *user)
 	if (user->za_size < ZA_SIG_CONTEXT_SIZE(vq))
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.sme_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
-
 	sme_alloc(current, true);
 	if (!current->thread.sme_state) {
 		current->thread.svcr &= ~SVCR_ZA_MASK;
@@ -627,11 +609,6 @@ static int preserve_zt_context(struct zt_context __user *ctx)
 	BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
-	/*
-	 * This assumes that the ZT state has already been saved to
-	 * the task struct by calling the function
-	 * fpsimd_signal_preserve_current_state().
-	 */
 	err |= __copy_to_user((char __user *)ctx + ZT_SIG_REGS_OFFSET,
 			      thread_zt_state(&current->thread),
 			      ZT_SIG_REGS_SIZE(1));
@@ -657,16 +634,6 @@ static int restore_zt_context(struct user_ctxs *user)
 	if (nregs != 1)
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.zt_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch ZT in thread state */
-
 	err = __copy_from_user(thread_zt_state(&current->thread),
 			       (char __user const *)user->zt +
 					ZT_SIG_REGS_OFFSET,
@@ -1017,6 +984,8 @@ static int restore_sigframe(struct pt_regs *regs,
 	 */
 	forget_syscall(regs);
 
+	fpsimd_save_and_flush_current_state();
+
 	err |= !valid_user_regs(&regs->user_regs, current);
 	if (err == 0)
 		err = parse_user_sigframe(&user, sf);
@@ -1507,21 +1476,9 @@ static int setup_return(struct pt_regs *regs, struct ksignal *ksig,
 
 	/* Signal handlers are invoked with ZA and streaming mode disabled */
 	if (system_supports_sme()) {
-		/*
-		 * If we were in streaming mode the saved register
-		 * state was SVE but we will exit SM and use the
-		 * FPSIMD register state - flush the saved FPSIMD
-		 * register state in case it gets loaded.
-		 */
-		if (current->thread.svcr & SVCR_SM_MASK) {
-			memset(&current->thread.uw.fpsimd_state, 0,
-			       sizeof(current->thread.uw.fpsimd_state));
-			current->thread.fp_type = FP_STATE_FPSIMD;
-		}
-
-		current->thread.svcr &= ~(SVCR_ZA_MASK |
-					  SVCR_SM_MASK);
-		sme_smstop();
+		task_smstop_sm(current);
+		current->thread.svcr &= ~SVCR_ZA_MASK;
+		write_sysreg_s(0, SYS_TPIDR2_EL0);
 	}
 
 	return 0;
@@ -1535,7 +1492,7 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
 	struct user_access_state ua_state;
 	int err = 0;
 
-	fpsimd_signal_preserve_current_state();
+	fpsimd_save_and_flush_current_state();
 
 	if (get_sigframe(&user, ksig, regs))
 		return 1;
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/signal32.c linux-libre-6.16-gnu/arch/arm64/kernel/signal32.c
index 81e798b6dada..bb3b526ff43f 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/signal32.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/signal32.c
@@ -103,7 +103,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
 	 * Note that this also saves V16-31, which aren't visible
 	 * in AArch32.
 	 */
-	fpsimd_signal_preserve_current_state();
+	fpsimd_save_and_flush_current_state();
 
 	/* Place structure header on the stack */
 	__put_user_error(magic, &frame->magic, err);
@@ -169,14 +169,17 @@ static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
 	fpsimd.fpsr = fpscr & VFP_FPSCR_STAT_MASK;
 	fpsimd.fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
 
+	if (err)
+		return -EFAULT;
+
 	/*
 	 * We don't need to touch the exception register, so
 	 * reload the hardware state.
 	 */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
+	fpsimd_save_and_flush_current_state();
+	current->thread.uw.fpsimd_state = fpsimd;
 
-	return err ? -EFAULT : 0;
+	return 0;
 }
 
 static int compat_restore_sigframe(struct pt_regs *regs,
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/smp.c linux-libre-6.16-gnu/arch/arm64/kernel/smp.c
index 3b3f6b56e733..21a795303568 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/smp.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/smp.c
@@ -1143,7 +1143,7 @@ static inline unsigned int num_other_online_cpus(void)
 void smp_send_stop(void)
 {
 	static unsigned long stop_in_progress;
-	cpumask_t mask;
+	static cpumask_t mask;
 	unsigned long timeout;
 
 	/*
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/traps.c linux-libre-6.16-gnu/arch/arm64/kernel/traps.c
index 529cff825531..9bfa5c944379 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/traps.c
+++ linux-libre-6.16-gnu/arch/arm64/kernel/traps.c
@@ -1118,7 +1118,7 @@ static struct break_hook kasan_break_hook = {
 #ifdef CONFIG_UBSAN_TRAP
 static int ubsan_handler(struct pt_regs *regs, unsigned long esr)
 {
-	die(report_ubsan_failure(regs, esr & UBSAN_BRK_MASK), regs, esr);
+	die(report_ubsan_failure(esr & UBSAN_BRK_MASK), regs, esr);
 	return DBG_HOOK_HANDLED;
 }
 
@@ -1145,7 +1145,7 @@ int __init early_brk64(unsigned long addr, unsigned long esr,
 		return kasan_handler(regs, esr) != DBG_HOOK_HANDLED;
 #endif
 #ifdef CONFIG_UBSAN_TRAP
-	if ((esr_brk_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM)
+	if (esr_is_ubsan_brk(esr))
 		return ubsan_handler(regs, esr) != DBG_HOOK_HANDLED;
 #endif
 	return bug_handler(regs, esr) != DBG_HOOK_HANDLED;
diff --git linux-libre-6.15-gnu/arch/arm64/kernel/vmlinux.lds.S linux-libre-6.16-gnu/arch/arm64/kernel/vmlinux.lds.S
index e73326bd3ff7..ad6133b89e7a 100644
--- linux-libre-6.15-gnu/arch/arm64/kernel/vmlinux.lds.S
+++ linux-libre-6.16-gnu/arch/arm64/kernel/vmlinux.lds.S
@@ -13,7 +13,7 @@
 	*(__kvm_ex_table)					\
 	__stop___kvm_ex_table = .;
 
-#define HYPERVISOR_DATA_SECTIONS				\
+#define HYPERVISOR_RODATA_SECTIONS				\
 	HYP_SECTION_NAME(.rodata) : {				\
 		. = ALIGN(PAGE_SIZE);				\
 		__hyp_rodata_start = .;				\
@@ -23,6 +23,15 @@
 		__hyp_rodata_end = .;				\
 	}
 
+#define HYPERVISOR_DATA_SECTION					\
+	HYP_SECTION_NAME(.data) : {				\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_data_start = .;				\
+		*(HYP_SECTION_NAME(.data))			\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_data_end = .;				\
+	}
+
 #define HYPERVISOR_PERCPU_SECTION				\
 	. = ALIGN(PAGE_SIZE);					\
 	HYP_SECTION_NAME(.data..percpu) : {			\
@@ -51,7 +60,8 @@
 #define SBSS_ALIGN			PAGE_SIZE
 #else /* CONFIG_KVM */
 #define HYPERVISOR_EXTABLE
-#define HYPERVISOR_DATA_SECTIONS
+#define HYPERVISOR_RODATA_SECTIONS
+#define HYPERVISOR_DATA_SECTION
 #define HYPERVISOR_PERCPU_SECTION
 #define HYPERVISOR_RELOC_SECTION
 #define SBSS_ALIGN			0
@@ -190,7 +200,7 @@ SECTIONS
 	/* everything from this point to __init_begin will be marked RO NX */
 	RO_DATA(PAGE_SIZE)
 
-	HYPERVISOR_DATA_SECTIONS
+	HYPERVISOR_RODATA_SECTIONS
 
 	.got : { *(.got) }
 	/*
@@ -249,9 +259,9 @@ SECTIONS
 	__inittext_end = .;
 	__initdata_begin = .;
 
-	init_idmap_pg_dir = .;
+	__pi_init_idmap_pg_dir = .;
 	. += INIT_IDMAP_DIR_SIZE;
-	init_idmap_pg_end = .;
+	__pi_init_idmap_pg_end = .;
 
 	.init.data : {
 		INIT_DATA
@@ -295,6 +305,8 @@ SECTIONS
 	_sdata = .;
 	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 
+	HYPERVISOR_DATA_SECTION
+
 	/*
 	 * Data written with the MMU off but read with the MMU on requires
 	 * cache lines to be invalidated, discarding up to a Cache Writeback
@@ -319,11 +331,12 @@ SECTIONS
 
 	/* start of zero-init region */
 	BSS_SECTION(SBSS_ALIGN, 0, 0)
+	__pi___bss_start = __bss_start;
 
 	. = ALIGN(PAGE_SIZE);
-	init_pg_dir = .;
+	__pi_init_pg_dir = .;
 	. += INIT_DIR_SIZE;
-	init_pg_end = .;
+	__pi_init_pg_end = .;
 	/* end of zero-init region */
 
 	. += SZ_4K;		/* stack for the early C runtime */
@@ -332,6 +345,7 @@ SECTIONS
 	. = ALIGN(SEGMENT_ALIGN);
 	__pecoff_data_size = ABSOLUTE(. - __initdata_begin);
 	_end = .;
+	__pi__end = .;
 
 	STABS_DEBUG
 	DWARF_DEBUG
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/Kconfig linux-libre-6.16-gnu/arch/arm64/kvm/Kconfig
index 096e45acadb2..713248f240e0 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/Kconfig
+++ linux-libre-6.16-gnu/arch/arm64/kvm/Kconfig
@@ -19,7 +19,6 @@ if VIRTUALIZATION
 
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
-	depends on AS_HAS_ARMV8_4
 	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
 	select KVM_GENERIC_MMU_NOTIFIER
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/Makefile linux-libre-6.16-gnu/arch/arm64/kvm/Makefile
index 209bc76263f1..7c329e01c557 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/kvm/Makefile
@@ -14,7 +14,7 @@ CFLAGS_sys_regs.o += -Wno-override-init
 CFLAGS_handle_exit.o += -Wno-override-init
 
 kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \
-	 inject_fault.o va_layout.o handle_exit.o \
+	 inject_fault.o va_layout.o handle_exit.o config.o \
 	 guest.o debug.o reset.o sys_regs.o stacktrace.o \
 	 vgic-sys-reg-v3.o fpsimd.o pkvm.o \
 	 arch_timer.o trng.o vmid.o emulate-nested.o nested.o at.o \
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/arch_timer.c linux-libre-6.16-gnu/arch/arm64/kvm/arch_timer.c
index 5133dcbfe9f7..701ea10a63f1 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/arch_timer.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/arch_timer.c
@@ -108,16 +108,16 @@ static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl)
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
-		__vcpu_sys_reg(vcpu, CNTV_CTL_EL0) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTV_CTL_EL0, ctl);
 		break;
 	case TIMER_PTIMER:
-		__vcpu_sys_reg(vcpu, CNTP_CTL_EL0) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTP_CTL_EL0, ctl);
 		break;
 	case TIMER_HVTIMER:
-		__vcpu_sys_reg(vcpu, CNTHV_CTL_EL2) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTHV_CTL_EL2, ctl);
 		break;
 	case TIMER_HPTIMER:
-		__vcpu_sys_reg(vcpu, CNTHP_CTL_EL2) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTHP_CTL_EL2, ctl);
 		break;
 	default:
 		WARN_ON(1);
@@ -130,16 +130,16 @@ static void timer_set_cval(struct arch_timer_context *ctxt, u64 cval)
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
-		__vcpu_sys_reg(vcpu, CNTV_CVAL_EL0) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTV_CVAL_EL0, cval);
 		break;
 	case TIMER_PTIMER:
-		__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTP_CVAL_EL0, cval);
 		break;
 	case TIMER_HVTIMER:
-		__vcpu_sys_reg(vcpu, CNTHV_CVAL_EL2) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTHV_CVAL_EL2, cval);
 		break;
 	case TIMER_HPTIMER:
-		__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTHP_CVAL_EL2, cval);
 		break;
 	default:
 		WARN_ON(1);
@@ -1036,7 +1036,7 @@ void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
 	if (vcpu_has_nv(vcpu)) {
 		struct arch_timer_offset *offs = &vcpu_vtimer(vcpu)->offset;
 
-		offs->vcpu_offset = &__vcpu_sys_reg(vcpu, CNTVOFF_EL2);
+		offs->vcpu_offset = __ctxt_sys_reg(&vcpu->arch.ctxt, CNTVOFF_EL2);
 		offs->vm_offset = &vcpu->kvm->arch.timer_data.poffset;
 	}
 
@@ -1766,7 +1766,7 @@ int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
 
 	mutex_lock(&kvm->lock);
 
-	if (lock_all_vcpus(kvm)) {
+	if (!kvm_trylock_all_vcpus(kvm)) {
 		set_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &kvm->arch.flags);
 
 		/*
@@ -1778,7 +1778,7 @@ int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
 		kvm->arch.timer_data.voffset = offset->counter_offset;
 		kvm->arch.timer_data.poffset = offset->counter_offset;
 
-		unlock_all_vcpus(kvm);
+		kvm_unlock_all_vcpus(kvm);
 	} else {
 		ret = -EBUSY;
 	}
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/arm.c linux-libre-6.16-gnu/arch/arm64/kvm/arm.c
index 19ca57def629..23dd3f3fc3eb 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/arm.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/arm.c
@@ -368,6 +368,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ARM_EL1_32BIT:
 		r = cpus_have_final_cap(ARM64_HAS_32BIT_EL1);
 		break;
+	case KVM_CAP_ARM_EL2:
+		r = cpus_have_final_cap(ARM64_HAS_NESTED_VIRT);
+		break;
+	case KVM_CAP_ARM_EL2_E2H0:
+		r = cpus_have_final_cap(ARM64_HAS_HCR_NV1);
+		break;
 	case KVM_CAP_GUEST_DEBUG_HW_BPS:
 		r = get_num_brps();
 		break;
@@ -819,10 +825,6 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (!kvm_arm_vcpu_is_finalized(vcpu))
 		return -EPERM;
 
-	ret = kvm_arch_vcpu_run_map_fp(vcpu);
-	if (ret)
-		return ret;
-
 	if (likely(vcpu_has_run_once(vcpu)))
 		return 0;
 
@@ -843,6 +845,10 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 		return ret;
 
 	if (vcpu_has_nv(vcpu)) {
+		ret = kvm_vcpu_allocate_vncr_tlb(vcpu);
+		if (ret)
+			return ret;
+
 		ret = kvm_vgic_vcpu_nv_init(vcpu);
 		if (ret)
 			return ret;
@@ -1914,49 +1920,6 @@ int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
 	}
 }
 
-/* unlocks vcpus from @vcpu_lock_idx and smaller */
-static void unlock_vcpus(struct kvm *kvm, int vcpu_lock_idx)
-{
-	struct kvm_vcpu *tmp_vcpu;
-
-	for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
-		tmp_vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
-		mutex_unlock(&tmp_vcpu->mutex);
-	}
-}
-
-void unlock_all_vcpus(struct kvm *kvm)
-{
-	lockdep_assert_held(&kvm->lock);
-
-	unlock_vcpus(kvm, atomic_read(&kvm->online_vcpus) - 1);
-}
-
-/* Returns true if all vcpus were locked, false otherwise */
-bool lock_all_vcpus(struct kvm *kvm)
-{
-	struct kvm_vcpu *tmp_vcpu;
-	unsigned long c;
-
-	lockdep_assert_held(&kvm->lock);
-
-	/*
-	 * Any time a vcpu is in an ioctl (including running), the
-	 * core KVM code tries to grab the vcpu->mutex.
-	 *
-	 * By grabbing the vcpu->mutex of all VCPUs we ensure that no
-	 * other VCPUs can fiddle with the state while we access it.
-	 */
-	kvm_for_each_vcpu(c, tmp_vcpu, kvm) {
-		if (!mutex_trylock(&tmp_vcpu->mutex)) {
-			unlock_vcpus(kvm, c - 1);
-			return false;
-		}
-	}
-
-	return true;
-}
-
 static unsigned long nvhe_percpu_size(void)
 {
 	return (unsigned long)CHOOSE_NVHE_SYM(__per_cpu_end) -
@@ -2162,7 +2125,7 @@ static void cpu_hyp_init(void *discard)
 
 static void cpu_hyp_uninit(void *discard)
 {
-	if (__this_cpu_read(kvm_hyp_initialized)) {
+	if (!is_protected_kvm_enabled() && __this_cpu_read(kvm_hyp_initialized)) {
 		cpu_hyp_reset();
 		__this_cpu_write(kvm_hyp_initialized, 0);
 	}
@@ -2378,8 +2341,13 @@ static void __init teardown_hyp_mode(void)
 
 	free_hyp_pgds();
 	for_each_possible_cpu(cpu) {
+		if (per_cpu(kvm_hyp_initialized, cpu))
+			continue;
+
 		free_pages(per_cpu(kvm_arm_hyp_stack_base, cpu), NVHE_STACK_SHIFT - PAGE_SHIFT);
-		free_pages(kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu], nvhe_percpu_order());
+
+		if (!kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu])
+			continue;
 
 		if (free_sve) {
 			struct cpu_sve_state *sve_state;
@@ -2387,6 +2355,9 @@ static void __init teardown_hyp_mode(void)
 			sve_state = per_cpu_ptr_nvhe_sym(kvm_host_data, cpu)->sve_state;
 			free_pages((unsigned long) sve_state, pkvm_host_sve_state_order());
 		}
+
+		free_pages(kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu], nvhe_percpu_order());
+
 	}
 }
 
@@ -2450,6 +2421,19 @@ static void kvm_hyp_init_symbols(void)
 	kvm_nvhe_sym(__icache_flags) = __icache_flags;
 	kvm_nvhe_sym(kvm_arm_vmid_bits) = kvm_arm_vmid_bits;
 
+	/* Propagate the FGT state to the the nVHE side */
+	kvm_nvhe_sym(hfgrtr_masks)  = hfgrtr_masks;
+	kvm_nvhe_sym(hfgwtr_masks)  = hfgwtr_masks;
+	kvm_nvhe_sym(hfgitr_masks)  = hfgitr_masks;
+	kvm_nvhe_sym(hdfgrtr_masks) = hdfgrtr_masks;
+	kvm_nvhe_sym(hdfgwtr_masks) = hdfgwtr_masks;
+	kvm_nvhe_sym(hafgrtr_masks) = hafgrtr_masks;
+	kvm_nvhe_sym(hfgrtr2_masks) = hfgrtr2_masks;
+	kvm_nvhe_sym(hfgwtr2_masks) = hfgwtr2_masks;
+	kvm_nvhe_sym(hfgitr2_masks) = hfgitr2_masks;
+	kvm_nvhe_sym(hdfgrtr2_masks)= hdfgrtr2_masks;
+	kvm_nvhe_sym(hdfgwtr2_masks)= hdfgwtr2_masks;
+
 	/*
 	 * Flush entire BSS since part of its data containing init symbols is read
 	 * while the MMU is off.
@@ -2604,6 +2588,13 @@ static int __init init_hyp_mode(void)
 		goto out_err;
 	}
 
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_data_start),
+				  kvm_ksym_ref(__hyp_data_end), PAGE_HYP);
+	if (err) {
+		kvm_err("Cannot map .hyp.data section\n");
+		goto out_err;
+	}
+
 	err = create_hyp_mappings(kvm_ksym_ref(__hyp_rodata_start),
 				  kvm_ksym_ref(__hyp_rodata_end), PAGE_HYP_RO);
 	if (err) {
@@ -2760,6 +2751,7 @@ int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
 	return kvm_vgic_v4_set_forwarding(irqfd->kvm, prod->irq,
 					  &irqfd->irq_entry);
 }
+
 void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
 				      struct irq_bypass_producer *prod)
 {
@@ -2770,8 +2762,30 @@ void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
 	if (irq_entry->type != KVM_IRQ_ROUTING_MSI)
 		return;
 
-	kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq,
-				     &irqfd->irq_entry);
+	kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq);
+}
+
+bool kvm_arch_irqfd_route_changed(struct kvm_kernel_irq_routing_entry *old,
+				  struct kvm_kernel_irq_routing_entry *new)
+{
+	if (old->type != KVM_IRQ_ROUTING_MSI ||
+	    new->type != KVM_IRQ_ROUTING_MSI)
+		return true;
+
+	return memcmp(&old->msi, &new->msi, sizeof(new->msi));
+}
+
+int kvm_arch_update_irqfd_routing(struct kvm *kvm, unsigned int host_irq,
+				  uint32_t guest_irq, bool set)
+{
+	/*
+	 * Remapping the vLPI requires taking the its_lock mutex to resolve
+	 * the new translation. We're in spinlock land at this point, so no
+	 * chance of resolving the translation.
+	 *
+	 * Unmap the vLPI and fall back to software LPI injection.
+	 */
+	return kvm_vgic_v4_unset_forwarding(kvm, host_irq);
 }
 
 void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *cons)
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/at.c linux-libre-6.16-gnu/arch/arm64/kvm/at.c
index f74a66ce3064..a25be111cd8f 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/at.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/at.c
@@ -10,61 +10,11 @@
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 
-enum trans_regime {
-	TR_EL10,
-	TR_EL20,
-	TR_EL2,
-};
-
-struct s1_walk_info {
-	u64	     		baddr;
-	enum trans_regime	regime;
-	unsigned int		max_oa_bits;
-	unsigned int		pgshift;
-	unsigned int		txsz;
-	int 	     		sl;
-	bool	     		hpd;
-	bool			e0poe;
-	bool			poe;
-	bool			pan;
-	bool	     		be;
-	bool	     		s2;
-};
-
-struct s1_walk_result {
-	union {
-		struct {
-			u64	desc;
-			u64	pa;
-			s8	level;
-			u8	APTable;
-			bool	UXNTable;
-			bool	PXNTable;
-			bool	uwxn;
-			bool	uov;
-			bool	ur;
-			bool	uw;
-			bool	ux;
-			bool	pwxn;
-			bool	pov;
-			bool	pr;
-			bool	pw;
-			bool	px;
-		};
-		struct {
-			u8	fst;
-			bool	ptw;
-			bool	s2;
-		};
-	};
-	bool	failed;
-};
-
-static void fail_s1_walk(struct s1_walk_result *wr, u8 fst, bool ptw, bool s2)
+static void fail_s1_walk(struct s1_walk_result *wr, u8 fst, bool s1ptw)
 {
 	wr->fst		= fst;
-	wr->ptw		= ptw;
-	wr->s2		= s2;
+	wr->ptw		= s1ptw;
+	wr->s2		= s1ptw;
 	wr->failed	= true;
 }
 
@@ -145,20 +95,15 @@ static void compute_s1poe(struct kvm_vcpu *vcpu, struct s1_walk_info *wi)
 	}
 }
 
-static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
+static int setup_s1_walk(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			 struct s1_walk_result *wr, u64 va)
 {
 	u64 hcr, sctlr, tcr, tg, ps, ia_bits, ttbr;
 	unsigned int stride, x;
-	bool va55, tbi, lva, as_el0;
+	bool va55, tbi, lva;
 
 	hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
 
-	wi->regime = compute_translation_regime(vcpu, op);
-	as_el0 = (op == OP_AT_S1E0R || op == OP_AT_S1E0W);
-	wi->pan = (op == OP_AT_S1E1RP || op == OP_AT_S1E1WP) &&
-		  (*vcpu_cpsr(vcpu) & PSR_PAN_BIT);
-
 	va55 = va & BIT(55);
 
 	if (wi->regime == TR_EL2 && va55)
@@ -319,7 +264,7 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 
 	/* R_BNDVG and following statements */
 	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR2_EL1, E0PD, IMP) &&
-	    as_el0 && (tcr & (va55 ? TCR_E0PD1 : TCR_E0PD0)))
+	    wi->as_el0 && (tcr & (va55 ? TCR_E0PD1 : TCR_E0PD0)))
 		goto transfault_l0;
 
 	/* AArch64.S1StartLevel() */
@@ -345,11 +290,11 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 	return 0;
 
 addrsz:				/* Address Size Fault level 0 */
-	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(0), false, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(0), false);
 	return -EFAULT;
 
 transfault_l0:			/* Translation Fault level 0 */
-	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(0), false, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(0), false);
 	return -EFAULT;
 }
 
@@ -380,13 +325,13 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			if (ret) {
 				fail_s1_walk(wr,
 					     (s2_trans.esr & ~ESR_ELx_FSC_LEVEL) | level,
-					     true, true);
+					     true);
 				return ret;
 			}
 
 			if (!kvm_s2_trans_readable(&s2_trans)) {
 				fail_s1_walk(wr, ESR_ELx_FSC_PERM_L(level),
-					     true, true);
+					     true);
 
 				return -EPERM;
 			}
@@ -396,8 +341,7 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 
 		ret = kvm_read_guest(vcpu->kvm, ipa, &desc, sizeof(desc));
 		if (ret) {
-			fail_s1_walk(wr, ESR_ELx_FSC_SEA_TTW(level),
-				     true, false);
+			fail_s1_walk(wr, ESR_ELx_FSC_SEA_TTW(level), false);
 			return ret;
 		}
 
@@ -457,6 +401,11 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 	if (check_output_size(desc & GENMASK(47, va_bottom), wi))
 		goto addrsz;
 
+	if (!(desc & PTE_AF)) {
+		fail_s1_walk(wr, ESR_ELx_FSC_ACCESS_L(level), false);
+		return -EACCES;
+	}
+
 	va_bottom += contiguous_bit_shift(desc, wi, level);
 
 	wr->failed = false;
@@ -465,13 +414,40 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 	wr->pa = desc & GENMASK(47, va_bottom);
 	wr->pa |= va & GENMASK_ULL(va_bottom - 1, 0);
 
+	wr->nG = (wi->regime != TR_EL2) && (desc & PTE_NG);
+	if (wr->nG) {
+		u64 asid_ttbr, tcr;
+
+		switch (wi->regime) {
+		case TR_EL10:
+			tcr = vcpu_read_sys_reg(vcpu, TCR_EL1);
+			asid_ttbr = ((tcr & TCR_A1) ?
+				     vcpu_read_sys_reg(vcpu, TTBR1_EL1) :
+				     vcpu_read_sys_reg(vcpu, TTBR0_EL1));
+			break;
+		case TR_EL20:
+			tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+			asid_ttbr = ((tcr & TCR_A1) ?
+				     vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+				     vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+			break;
+		default:
+			BUG();
+		}
+
+		wr->asid = FIELD_GET(TTBR_ASID_MASK, asid_ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			wr->asid &= GENMASK(7, 0);
+	}
+
 	return 0;
 
 addrsz:
-	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(level), true, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(level), false);
 	return -EINVAL;
 transfault:
-	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(level), true, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(level), false);
 	return -ENOENT;
 }
 
@@ -488,7 +464,6 @@ struct mmu_config {
 	u64	sctlr;
 	u64	vttbr;
 	u64	vtcr;
-	u64	hcr;
 };
 
 static void __mmu_config_save(struct mmu_config *config)
@@ -511,13 +486,10 @@ static void __mmu_config_save(struct mmu_config *config)
 	config->sctlr	= read_sysreg_el1(SYS_SCTLR);
 	config->vttbr	= read_sysreg(vttbr_el2);
 	config->vtcr	= read_sysreg(vtcr_el2);
-	config->hcr	= read_sysreg(hcr_el2);
 }
 
 static void __mmu_config_restore(struct mmu_config *config)
 {
-	write_sysreg(config->hcr,	hcr_el2);
-
 	/*
 	 * ARM errata 1165522 and 1530923 require TGE to be 1 before
 	 * we update the guest state.
@@ -1155,7 +1127,12 @@ static u64 handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	bool perm_fail = false;
 	int ret, idx;
 
-	ret = setup_s1_walk(vcpu, op, &wi, &wr, vaddr);
+	wi.regime = compute_translation_regime(vcpu, op);
+	wi.as_el0 = (op == OP_AT_S1E0R || op == OP_AT_S1E0W);
+	wi.pan = (op == OP_AT_S1E1RP || op == OP_AT_S1E1WP) &&
+		 (*vcpu_cpsr(vcpu) & PSR_PAN_BIT);
+
+	ret = setup_s1_walk(vcpu, &wi, &wr, vaddr);
 	if (ret)
 		goto compute_par;
 
@@ -1198,7 +1175,7 @@ static u64 handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	}
 
 	if (perm_fail)
-		fail_s1_walk(&wr, ESR_ELx_FSC_PERM_L(wr.level), false, false);
+		fail_s1_walk(&wr, ESR_ELx_FSC_PERM_L(wr.level), false);
 
 compute_par:
 	return compute_par_s1(vcpu, &wr, wi.regime);
@@ -1210,7 +1187,8 @@ compute_par:
  * If the translation is unsuccessful, the value may only contain
  * PAR_EL1.F, and cannot be taken at face value. It isn't an
  * indication of the translation having failed, only that the fast
- * path did not succeed, *unless* it indicates a S1 permission fault.
+ * path did not succeed, *unless* it indicates a S1 permission or
+ * access fault.
  */
 static u64 __kvm_at_s1e01_fast(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
@@ -1266,8 +1244,8 @@ static u64 __kvm_at_s1e01_fast(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	__load_stage2(mmu, mmu->arch);
 
 skip_mmu_switch:
-	/* Clear TGE, enable S2 translation, we're rolling */
-	write_sysreg((config.hcr & ~HCR_TGE) | HCR_VM,	hcr_el2);
+	/* Temporarily switch back to guest context */
+	write_sysreg_hcr(vcpu->arch.hcr_el2);
 	isb();
 
 	switch (op) {
@@ -1299,6 +1277,8 @@ skip_mmu_switch:
 	if (!fail)
 		par = read_sysreg_par();
 
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
+
 	if (!(vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu)))
 		__mmu_config_restore(&config);
 
@@ -1313,19 +1293,29 @@ static bool par_check_s1_perm_fault(u64 par)
 		 !(par & SYS_PAR_EL1_S));
 }
 
+static bool par_check_s1_access_fault(u64 par)
+{
+	u8 fst = FIELD_GET(SYS_PAR_EL1_FST, par);
+
+	return  ((fst & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS &&
+		 !(par & SYS_PAR_EL1_S));
+}
+
 void __kvm_at_s1e01(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
 	u64 par = __kvm_at_s1e01_fast(vcpu, op, vaddr);
 
 	/*
-	 * If PAR_EL1 reports that AT failed on a S1 permission fault, we
-	 * know for sure that the PTW was able to walk the S1 tables and
-	 * there's nothing else to do.
+	 * If PAR_EL1 reports that AT failed on a S1 permission or access
+	 * fault, we know for sure that the PTW was able to walk the S1
+	 * tables and there's nothing else to do.
 	 *
 	 * If AT failed for any other reason, then we must walk the guest S1
 	 * to emulate the instruction.
 	 */
-	if ((par & SYS_PAR_EL1_F) && !par_check_s1_perm_fault(par))
+	if ((par & SYS_PAR_EL1_F) &&
+	    !par_check_s1_perm_fault(par) &&
+	    !par_check_s1_access_fault(par))
 		par = handle_at_slow(vcpu, op, vaddr);
 
 	vcpu_write_sys_reg(vcpu, par, PAR_EL1);
@@ -1350,7 +1340,7 @@ void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		if (!vcpu_el2_e2h_is_set(vcpu))
 			val |= HCR_NV | HCR_NV1;
 
-		write_sysreg(val, hcr_el2);
+		write_sysreg_hcr(val);
 		isb();
 
 		par = SYS_PAR_EL1_F;
@@ -1375,7 +1365,7 @@ void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		if (!fail)
 			par = read_sysreg_par();
 
-		write_sysreg(hcr, hcr_el2);
+		write_sysreg_hcr(hcr);
 		isb();
 	}
 
@@ -1444,3 +1434,31 @@ void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	par = compute_par_s12(vcpu, par, &out);
 	vcpu_write_sys_reg(vcpu, par, PAR_EL1);
 }
+
+/*
+ * Translate a VA for a given EL in a given translation regime, with
+ * or without PAN. This requires wi->{regime, as_el0, pan} to be
+ * set. The rest of the wi and wr should be 0-initialised.
+ */
+int __kvm_translate_va(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
+		       struct s1_walk_result *wr, u64 va)
+{
+	int ret;
+
+	ret = setup_s1_walk(vcpu, wi, wr, va);
+	if (ret)
+		return ret;
+
+	if (wr->level == S1_MMU_DISABLED) {
+		wr->ur = wr->uw = wr->ux = true;
+		wr->pr = wr->pw = wr->px = true;
+	} else {
+		ret = walk_s1(vcpu, wi, wr, va);
+		if (ret)
+			return ret;
+
+		compute_s1_permissions(vcpu, wi, wr);
+	}
+
+	return 0;
+}
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/config.c linux-libre-6.16-gnu/arch/arm64/kvm/config.c
new file mode 100644
index 000000000000..54911a93b001
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/kvm/config.c
@@ -0,0 +1,1085 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Google LLC
+ * Author: Marc Zyngier <maz@kernel.org>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/sysreg.h>
+
+struct reg_bits_to_feat_map {
+	u64		bits;
+
+#define	NEVER_FGU	BIT(0)	/* Can trap, but never UNDEF */
+#define	CALL_FUNC	BIT(1)	/* Needs to evaluate tons of crap */
+#define	FIXED_VALUE	BIT(2)	/* RAZ/WI or RAO/WI in KVM */
+	unsigned long	flags;
+
+	union {
+		struct {
+			u8	regidx;
+			u8	shift;
+			u8	width;
+			bool	sign;
+			s8	lo_lim;
+		};
+		bool	(*match)(struct kvm *);
+		bool	(*fval)(struct kvm *, u64 *);
+	};
+};
+
+#define __NEEDS_FEAT_3(m, f, id, fld, lim)		\
+	{						\
+		.bits	= (m),				\
+		.flags = (f),				\
+		.regidx	= IDREG_IDX(SYS_ ## id),	\
+		.shift	= id ##_## fld ## _SHIFT,	\
+		.width	= id ##_## fld ## _WIDTH,	\
+		.sign	= id ##_## fld ## _SIGNED,	\
+		.lo_lim	= id ##_## fld ##_## lim	\
+	}
+
+#define __NEEDS_FEAT_2(m, f, fun, dummy)		\
+	{						\
+		.bits	= (m),				\
+		.flags = (f) | CALL_FUNC,		\
+		.fval = (fun),				\
+	}
+
+#define __NEEDS_FEAT_1(m, f, fun)			\
+	{						\
+		.bits	= (m),				\
+		.flags = (f) | CALL_FUNC,		\
+		.match = (fun),				\
+	}
+
+#define NEEDS_FEAT_FLAG(m, f, ...)			\
+	CONCATENATE(__NEEDS_FEAT_, COUNT_ARGS(__VA_ARGS__))(m, f, __VA_ARGS__)
+
+#define NEEDS_FEAT_FIXED(m, ...)			\
+	NEEDS_FEAT_FLAG(m, FIXED_VALUE, __VA_ARGS__, 0)
+
+#define NEEDS_FEAT(m, ...)	NEEDS_FEAT_FLAG(m, 0, __VA_ARGS__)
+
+#define FEAT_SPE		ID_AA64DFR0_EL1, PMSVer, IMP
+#define FEAT_SPE_FnE		ID_AA64DFR0_EL1, PMSVer, V1P2
+#define FEAT_BRBE		ID_AA64DFR0_EL1, BRBE, IMP
+#define FEAT_TRC_SR		ID_AA64DFR0_EL1, TraceVer, IMP
+#define FEAT_PMUv3		ID_AA64DFR0_EL1, PMUVer, IMP
+#define FEAT_PMUv3p9		ID_AA64DFR0_EL1, PMUVer, V3P9
+#define FEAT_TRBE		ID_AA64DFR0_EL1, TraceBuffer, IMP
+#define FEAT_TRBEv1p1		ID_AA64DFR0_EL1, TraceBuffer, TRBE_V1P1
+#define FEAT_DoubleLock		ID_AA64DFR0_EL1, DoubleLock, IMP
+#define FEAT_TRF		ID_AA64DFR0_EL1, TraceFilt, IMP
+#define FEAT_AA32EL0		ID_AA64PFR0_EL1, EL0, AARCH32
+#define FEAT_AA32EL1		ID_AA64PFR0_EL1, EL1, AARCH32
+#define FEAT_AA64EL1		ID_AA64PFR0_EL1, EL1, IMP
+#define FEAT_AA64EL3		ID_AA64PFR0_EL1, EL3, IMP
+#define FEAT_AIE		ID_AA64MMFR3_EL1, AIE, IMP
+#define FEAT_S2POE		ID_AA64MMFR3_EL1, S2POE, IMP
+#define FEAT_S1POE		ID_AA64MMFR3_EL1, S1POE, IMP
+#define FEAT_S1PIE		ID_AA64MMFR3_EL1, S1PIE, IMP
+#define FEAT_THE		ID_AA64PFR1_EL1, THE, IMP
+#define FEAT_SME		ID_AA64PFR1_EL1, SME, IMP
+#define FEAT_GCS		ID_AA64PFR1_EL1, GCS, IMP
+#define FEAT_LS64		ID_AA64ISAR1_EL1, LS64, LS64
+#define FEAT_LS64_V		ID_AA64ISAR1_EL1, LS64, LS64_V
+#define FEAT_LS64_ACCDATA	ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA
+#define FEAT_RAS		ID_AA64PFR0_EL1, RAS, IMP
+#define FEAT_RASv2		ID_AA64PFR0_EL1, RAS, V2
+#define FEAT_GICv3		ID_AA64PFR0_EL1, GIC, IMP
+#define FEAT_LOR		ID_AA64MMFR1_EL1, LO, IMP
+#define FEAT_SPEv1p4		ID_AA64DFR0_EL1, PMSVer, V1P4
+#define FEAT_SPEv1p5		ID_AA64DFR0_EL1, PMSVer, V1P5
+#define FEAT_ATS1A		ID_AA64ISAR2_EL1, ATS1A, IMP
+#define FEAT_SPECRES2		ID_AA64ISAR1_EL1, SPECRES, COSP_RCTX
+#define FEAT_SPECRES		ID_AA64ISAR1_EL1, SPECRES, IMP
+#define FEAT_TLBIRANGE		ID_AA64ISAR0_EL1, TLB, RANGE
+#define FEAT_TLBIOS		ID_AA64ISAR0_EL1, TLB, OS
+#define FEAT_PAN2		ID_AA64MMFR1_EL1, PAN, PAN2
+#define FEAT_DPB2		ID_AA64ISAR1_EL1, DPB, DPB2
+#define FEAT_AMUv1		ID_AA64PFR0_EL1, AMU, IMP
+#define FEAT_AMUv1p1		ID_AA64PFR0_EL1, AMU, V1P1
+#define FEAT_CMOW		ID_AA64MMFR1_EL1, CMOW, IMP
+#define FEAT_D128		ID_AA64MMFR3_EL1, D128, IMP
+#define FEAT_DoubleFault2	ID_AA64PFR1_EL1, DF2, IMP
+#define FEAT_FPMR		ID_AA64PFR2_EL1, FPMR, IMP
+#define FEAT_MOPS		ID_AA64ISAR2_EL1, MOPS, IMP
+#define FEAT_NMI		ID_AA64PFR1_EL1, NMI, IMP
+#define FEAT_SCTLR2		ID_AA64MMFR3_EL1, SCTLRX, IMP
+#define FEAT_SYSREG128		ID_AA64ISAR2_EL1, SYSREG_128, IMP
+#define FEAT_TCR2		ID_AA64MMFR3_EL1, TCRX, IMP
+#define FEAT_XS			ID_AA64ISAR1_EL1, XS, IMP
+#define FEAT_EVT		ID_AA64MMFR2_EL1, EVT, IMP
+#define FEAT_EVT_TTLBxS		ID_AA64MMFR2_EL1, EVT, TTLBxS
+#define FEAT_MTE2		ID_AA64PFR1_EL1, MTE, MTE2
+#define FEAT_RME		ID_AA64PFR0_EL1, RME, IMP
+#define FEAT_MPAM		ID_AA64PFR0_EL1, MPAM, 1
+#define FEAT_S2FWB		ID_AA64MMFR2_EL1, FWB, IMP
+#define FEAT_TME		ID_AA64ISAR0_EL1, TME, IMP
+#define FEAT_TWED		ID_AA64MMFR1_EL1, TWED, IMP
+#define FEAT_E2H0		ID_AA64MMFR4_EL1, E2H0, IMP
+#define FEAT_SRMASK		ID_AA64MMFR4_EL1, SRMASK, IMP
+#define FEAT_PoPS		ID_AA64MMFR4_EL1, PoPS, IMP
+#define FEAT_PFAR		ID_AA64PFR1_EL1, PFAR, IMP
+#define FEAT_Debugv8p9		ID_AA64DFR0_EL1, PMUVer, V3P9
+#define FEAT_PMUv3_SS		ID_AA64DFR0_EL1, PMSS, IMP
+#define FEAT_SEBEP		ID_AA64DFR0_EL1, SEBEP, IMP
+#define FEAT_EBEP		ID_AA64DFR1_EL1, EBEP, IMP
+#define FEAT_ITE		ID_AA64DFR1_EL1, ITE, IMP
+#define FEAT_PMUv3_ICNTR	ID_AA64DFR1_EL1, PMICNTR, IMP
+#define FEAT_SPMU		ID_AA64DFR1_EL1, SPMU, IMP
+#define FEAT_SPE_nVM		ID_AA64DFR2_EL1, SPE_nVM, IMP
+#define FEAT_STEP2		ID_AA64DFR2_EL1, STEP, IMP
+
+static bool not_feat_aa64el3(struct kvm *kvm)
+{
+	return !kvm_has_feat(kvm, FEAT_AA64EL3);
+}
+
+static bool feat_nv2(struct kvm *kvm)
+{
+	return ((kvm_has_feat(kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY) &&
+		 kvm_has_feat_enum(kvm, ID_AA64MMFR2_EL1, NV, NI)) ||
+		kvm_has_feat(kvm, ID_AA64MMFR2_EL1, NV, NV2));
+}
+
+static bool feat_nv2_e2h0_ni(struct kvm *kvm)
+{
+	return feat_nv2(kvm) && !kvm_has_feat(kvm, FEAT_E2H0);
+}
+
+static bool feat_rasv1p1(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1) ||
+		(kvm_has_feat_enum(kvm, ID_AA64PFR0_EL1, RAS, IMP) &&
+		 kvm_has_feat(kvm, ID_AA64PFR1_EL1, RAS_frac, RASv1p1)));
+}
+
+static bool feat_csv2_2_csv2_1p2(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm,  ID_AA64PFR0_EL1, CSV2, CSV2_2) ||
+		(kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2) &&
+		 kvm_has_feat_enum(kvm,  ID_AA64PFR0_EL1, CSV2, IMP)));
+}
+
+static bool feat_pauth(struct kvm *kvm)
+{
+	return kvm_has_pauth(kvm, PAuth);
+}
+
+static bool feat_pauth_lr(struct kvm *kvm)
+{
+	return kvm_has_pauth(kvm, PAuth_LR);
+}
+
+static bool feat_aderr(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ADERR, FEAT_ADERR) &&
+		kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SDERR, FEAT_ADERR));
+}
+
+static bool feat_anerr(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ANERR, FEAT_ANERR) &&
+		kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SNERR, FEAT_ANERR));
+}
+
+static bool feat_sme_smps(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports SME -- this really should
+	 * look at the guest's view of SMIDR_EL1. Funnily enough, this
+	 * is not captured in the JSON file, but only as a note in the
+	 * ARM ARM.
+	 */
+	return (kvm_has_feat(kvm, FEAT_SME) &&
+		(read_sysreg_s(SYS_SMIDR_EL1) & SMIDR_EL1_SMPS));
+}
+
+static bool feat_spe_fds(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports SPE -- this really should
+	 * look at the guest's view of PMSIDR_EL1.
+	 */
+	return (kvm_has_feat(kvm, FEAT_SPEv1p4) &&
+		(read_sysreg_s(SYS_PMSIDR_EL1) & PMSIDR_EL1_FDS));
+}
+
+static bool feat_trbe_mpam(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports both MPAM and TRBE --
+	 * this really should look at the guest's view of TRBIDR_EL1.
+	 */
+	return (kvm_has_feat(kvm, FEAT_TRBE) &&
+		kvm_has_feat(kvm, FEAT_MPAM) &&
+		(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_MPAM));
+}
+
+static bool feat_ebep_pmuv3_ss(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_EBEP) || kvm_has_feat(kvm, FEAT_PMUv3_SS);
+}
+
+static bool compute_hcr_rw(struct kvm *kvm, u64 *bits)
+{
+	/* This is purely academic: AArch32 and NV are mutually exclusive */
+	if (bits) {
+		if (kvm_has_feat(kvm, FEAT_AA32EL1))
+			*bits &= ~HCR_EL2_RW;
+		else
+			*bits |= HCR_EL2_RW;
+	}
+
+	return true;
+}
+
+static bool compute_hcr_e2h(struct kvm *kvm, u64 *bits)
+{
+	if (bits) {
+		if (kvm_has_feat(kvm, FEAT_E2H0))
+			*bits &= ~HCR_EL2_E2H;
+		else
+			*bits |= HCR_EL2_E2H;
+	}
+
+	return true;
+}
+
+static const struct reg_bits_to_feat_map hfgrtr_feat_map[] = {
+	NEEDS_FEAT(HFGRTR_EL2_nAMAIR2_EL1	|
+		   HFGRTR_EL2_nMAIR2_EL1,
+		   FEAT_AIE),
+	NEEDS_FEAT(HFGRTR_EL2_nS2POR_EL1, FEAT_S2POE),
+	NEEDS_FEAT(HFGRTR_EL2_nPOR_EL1		|
+		   HFGRTR_EL2_nPOR_EL0,
+		   FEAT_S1POE),
+	NEEDS_FEAT(HFGRTR_EL2_nPIR_EL1		|
+		   HFGRTR_EL2_nPIRE0_EL1,
+		   FEAT_S1PIE),
+	NEEDS_FEAT(HFGRTR_EL2_nRCWMASK_EL1, FEAT_THE),
+	NEEDS_FEAT(HFGRTR_EL2_nTPIDR2_EL0	|
+		   HFGRTR_EL2_nSMPRI_EL1,
+		   FEAT_SME),
+	NEEDS_FEAT(HFGRTR_EL2_nGCS_EL1		|
+		   HFGRTR_EL2_nGCS_EL0,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGRTR_EL2_nACCDATA_EL1, FEAT_LS64_ACCDATA),
+	NEEDS_FEAT(HFGRTR_EL2_ERXADDR_EL1	|
+		   HFGRTR_EL2_ERXMISCn_EL1	|
+		   HFGRTR_EL2_ERXSTATUS_EL1	|
+		   HFGRTR_EL2_ERXCTLR_EL1	|
+		   HFGRTR_EL2_ERXFR_EL1		|
+		   HFGRTR_EL2_ERRSELR_EL1	|
+		   HFGRTR_EL2_ERRIDR_EL1,
+		   FEAT_RAS),
+	NEEDS_FEAT(HFGRTR_EL2_ERXPFGCDN_EL1	|
+		   HFGRTR_EL2_ERXPFGCTL_EL1	|
+		   HFGRTR_EL2_ERXPFGF_EL1,
+		   feat_rasv1p1),
+	NEEDS_FEAT(HFGRTR_EL2_ICC_IGRPENn_EL1, FEAT_GICv3),
+	NEEDS_FEAT(HFGRTR_EL2_SCXTNUM_EL0	|
+		   HFGRTR_EL2_SCXTNUM_EL1,
+		   feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HFGRTR_EL2_LORSA_EL1		|
+		   HFGRTR_EL2_LORN_EL1		|
+		   HFGRTR_EL2_LORID_EL1		|
+		   HFGRTR_EL2_LOREA_EL1		|
+		   HFGRTR_EL2_LORC_EL1,
+		   FEAT_LOR),
+	NEEDS_FEAT(HFGRTR_EL2_APIBKey		|
+		   HFGRTR_EL2_APIAKey		|
+		   HFGRTR_EL2_APGAKey		|
+		   HFGRTR_EL2_APDBKey		|
+		   HFGRTR_EL2_APDAKey,
+		   feat_pauth),
+	NEEDS_FEAT_FLAG(HFGRTR_EL2_VBAR_EL1	|
+			HFGRTR_EL2_TTBR1_EL1	|
+			HFGRTR_EL2_TTBR0_EL1	|
+			HFGRTR_EL2_TPIDR_EL0	|
+			HFGRTR_EL2_TPIDRRO_EL0	|
+			HFGRTR_EL2_TPIDR_EL1	|
+			HFGRTR_EL2_TCR_EL1	|
+			HFGRTR_EL2_SCTLR_EL1	|
+			HFGRTR_EL2_REVIDR_EL1	|
+			HFGRTR_EL2_PAR_EL1	|
+			HFGRTR_EL2_MPIDR_EL1	|
+			HFGRTR_EL2_MIDR_EL1	|
+			HFGRTR_EL2_MAIR_EL1	|
+			HFGRTR_EL2_ISR_EL1	|
+			HFGRTR_EL2_FAR_EL1	|
+			HFGRTR_EL2_ESR_EL1	|
+			HFGRTR_EL2_DCZID_EL0	|
+			HFGRTR_EL2_CTR_EL0	|
+			HFGRTR_EL2_CSSELR_EL1	|
+			HFGRTR_EL2_CPACR_EL1	|
+			HFGRTR_EL2_CONTEXTIDR_EL1|
+			HFGRTR_EL2_CLIDR_EL1	|
+			HFGRTR_EL2_CCSIDR_EL1	|
+			HFGRTR_EL2_AMAIR_EL1	|
+			HFGRTR_EL2_AIDR_EL1	|
+			HFGRTR_EL2_AFSR1_EL1	|
+			HFGRTR_EL2_AFSR0_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+static const struct reg_bits_to_feat_map hfgwtr_feat_map[] = {
+	NEEDS_FEAT(HFGWTR_EL2_nAMAIR2_EL1	|
+		   HFGWTR_EL2_nMAIR2_EL1,
+		   FEAT_AIE),
+	NEEDS_FEAT(HFGWTR_EL2_nS2POR_EL1, FEAT_S2POE),
+	NEEDS_FEAT(HFGWTR_EL2_nPOR_EL1		|
+		   HFGWTR_EL2_nPOR_EL0,
+		   FEAT_S1POE),
+	NEEDS_FEAT(HFGWTR_EL2_nPIR_EL1		|
+		   HFGWTR_EL2_nPIRE0_EL1,
+		   FEAT_S1PIE),
+	NEEDS_FEAT(HFGWTR_EL2_nRCWMASK_EL1, FEAT_THE),
+	NEEDS_FEAT(HFGWTR_EL2_nTPIDR2_EL0	|
+		   HFGWTR_EL2_nSMPRI_EL1,
+		   FEAT_SME),
+	NEEDS_FEAT(HFGWTR_EL2_nGCS_EL1		|
+		   HFGWTR_EL2_nGCS_EL0,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGWTR_EL2_nACCDATA_EL1, FEAT_LS64_ACCDATA),
+	NEEDS_FEAT(HFGWTR_EL2_ERXADDR_EL1	|
+		   HFGWTR_EL2_ERXMISCn_EL1	|
+		   HFGWTR_EL2_ERXSTATUS_EL1	|
+		   HFGWTR_EL2_ERXCTLR_EL1	|
+		   HFGWTR_EL2_ERRSELR_EL1,
+		   FEAT_RAS),
+	NEEDS_FEAT(HFGWTR_EL2_ERXPFGCDN_EL1	|
+		   HFGWTR_EL2_ERXPFGCTL_EL1,
+		   feat_rasv1p1),
+	NEEDS_FEAT(HFGWTR_EL2_ICC_IGRPENn_EL1, FEAT_GICv3),
+	NEEDS_FEAT(HFGWTR_EL2_SCXTNUM_EL0	|
+		   HFGWTR_EL2_SCXTNUM_EL1,
+		   feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HFGWTR_EL2_LORSA_EL1		|
+		   HFGWTR_EL2_LORN_EL1		|
+		   HFGWTR_EL2_LOREA_EL1		|
+		   HFGWTR_EL2_LORC_EL1,
+		   FEAT_LOR),
+	NEEDS_FEAT(HFGWTR_EL2_APIBKey		|
+		   HFGWTR_EL2_APIAKey		|
+		   HFGWTR_EL2_APGAKey		|
+		   HFGWTR_EL2_APDBKey		|
+		   HFGWTR_EL2_APDAKey,
+		   feat_pauth),
+	NEEDS_FEAT_FLAG(HFGWTR_EL2_VBAR_EL1	|
+			HFGWTR_EL2_TTBR1_EL1	|
+			HFGWTR_EL2_TTBR0_EL1	|
+			HFGWTR_EL2_TPIDR_EL0	|
+			HFGWTR_EL2_TPIDRRO_EL0	|
+			HFGWTR_EL2_TPIDR_EL1	|
+			HFGWTR_EL2_TCR_EL1	|
+			HFGWTR_EL2_SCTLR_EL1	|
+			HFGWTR_EL2_PAR_EL1	|
+			HFGWTR_EL2_MAIR_EL1	|
+			HFGWTR_EL2_FAR_EL1	|
+			HFGWTR_EL2_ESR_EL1	|
+			HFGWTR_EL2_CSSELR_EL1	|
+			HFGWTR_EL2_CPACR_EL1	|
+			HFGWTR_EL2_CONTEXTIDR_EL1|
+			HFGWTR_EL2_AMAIR_EL1	|
+			HFGWTR_EL2_AFSR1_EL1	|
+			HFGWTR_EL2_AFSR0_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+static const struct reg_bits_to_feat_map hdfgrtr_feat_map[] = {
+	NEEDS_FEAT(HDFGRTR_EL2_PMBIDR_EL1	|
+		   HDFGRTR_EL2_PMSLATFR_EL1	|
+		   HDFGRTR_EL2_PMSIRR_EL1	|
+		   HDFGRTR_EL2_PMSIDR_EL1	|
+		   HDFGRTR_EL2_PMSICR_EL1	|
+		   HDFGRTR_EL2_PMSFCR_EL1	|
+		   HDFGRTR_EL2_PMSEVFR_EL1	|
+		   HDFGRTR_EL2_PMSCR_EL1	|
+		   HDFGRTR_EL2_PMBSR_EL1	|
+		   HDFGRTR_EL2_PMBPTR_EL1	|
+		   HDFGRTR_EL2_PMBLIMITR_EL1,
+		   FEAT_SPE),
+	NEEDS_FEAT(HDFGRTR_EL2_nPMSNEVFR_EL1, FEAT_SPE_FnE),
+	NEEDS_FEAT(HDFGRTR_EL2_nBRBDATA		|
+		   HDFGRTR_EL2_nBRBCTL		|
+		   HDFGRTR_EL2_nBRBIDR,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HDFGRTR_EL2_TRCVICTLR	|
+		   HDFGRTR_EL2_TRCSTATR		|
+		   HDFGRTR_EL2_TRCSSCSRn	|
+		   HDFGRTR_EL2_TRCSEQSTR	|
+		   HDFGRTR_EL2_TRCPRGCTLR	|
+		   HDFGRTR_EL2_TRCOSLSR		|
+		   HDFGRTR_EL2_TRCIMSPECn	|
+		   HDFGRTR_EL2_TRCID		|
+		   HDFGRTR_EL2_TRCCNTVRn	|
+		   HDFGRTR_EL2_TRCCLAIM		|
+		   HDFGRTR_EL2_TRCAUXCTLR	|
+		   HDFGRTR_EL2_TRCAUTHSTATUS	|
+		   HDFGRTR_EL2_TRC,
+		   FEAT_TRC_SR),
+	NEEDS_FEAT(HDFGRTR_EL2_PMCEIDn_EL0	|
+		   HDFGRTR_EL2_PMUSERENR_EL0	|
+		   HDFGRTR_EL2_PMMIR_EL1	|
+		   HDFGRTR_EL2_PMSELR_EL0	|
+		   HDFGRTR_EL2_PMOVS		|
+		   HDFGRTR_EL2_PMINTEN		|
+		   HDFGRTR_EL2_PMCNTEN		|
+		   HDFGRTR_EL2_PMCCNTR_EL0	|
+		   HDFGRTR_EL2_PMCCFILTR_EL0	|
+		   HDFGRTR_EL2_PMEVTYPERn_EL0	|
+		   HDFGRTR_EL2_PMEVCNTRn_EL0,
+		   FEAT_PMUv3),
+	NEEDS_FEAT(HDFGRTR_EL2_TRBTRG_EL1	|
+		   HDFGRTR_EL2_TRBSR_EL1	|
+		   HDFGRTR_EL2_TRBPTR_EL1	|
+		   HDFGRTR_EL2_TRBMAR_EL1	|
+		   HDFGRTR_EL2_TRBLIMITR_EL1	|
+		   HDFGRTR_EL2_TRBIDR_EL1	|
+		   HDFGRTR_EL2_TRBBASER_EL1,
+		   FEAT_TRBE),
+	NEEDS_FEAT_FLAG(HDFGRTR_EL2_OSDLR_EL1, NEVER_FGU,
+			FEAT_DoubleLock),
+	NEEDS_FEAT_FLAG(HDFGRTR_EL2_OSECCR_EL1	|
+			HDFGRTR_EL2_OSLSR_EL1	|
+			HDFGRTR_EL2_DBGPRCR_EL1	|
+			HDFGRTR_EL2_DBGAUTHSTATUS_EL1|
+			HDFGRTR_EL2_DBGCLAIM	|
+			HDFGRTR_EL2_MDSCR_EL1	|
+			HDFGRTR_EL2_DBGWVRn_EL1	|
+			HDFGRTR_EL2_DBGWCRn_EL1	|
+			HDFGRTR_EL2_DBGBVRn_EL1	|
+			HDFGRTR_EL2_DBGBCRn_EL1,
+			NEVER_FGU, FEAT_AA64EL1)
+};
+
+static const struct reg_bits_to_feat_map hdfgwtr_feat_map[] = {
+	NEEDS_FEAT(HDFGWTR_EL2_PMSLATFR_EL1	|
+		   HDFGWTR_EL2_PMSIRR_EL1	|
+		   HDFGWTR_EL2_PMSICR_EL1	|
+		   HDFGWTR_EL2_PMSFCR_EL1	|
+		   HDFGWTR_EL2_PMSEVFR_EL1	|
+		   HDFGWTR_EL2_PMSCR_EL1	|
+		   HDFGWTR_EL2_PMBSR_EL1	|
+		   HDFGWTR_EL2_PMBPTR_EL1	|
+		   HDFGWTR_EL2_PMBLIMITR_EL1,
+		   FEAT_SPE),
+	NEEDS_FEAT(HDFGWTR_EL2_nPMSNEVFR_EL1, FEAT_SPE_FnE),
+	NEEDS_FEAT(HDFGWTR_EL2_nBRBDATA		|
+		   HDFGWTR_EL2_nBRBCTL,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HDFGWTR_EL2_TRCVICTLR	|
+		   HDFGWTR_EL2_TRCSSCSRn	|
+		   HDFGWTR_EL2_TRCSEQSTR	|
+		   HDFGWTR_EL2_TRCPRGCTLR	|
+		   HDFGWTR_EL2_TRCOSLAR		|
+		   HDFGWTR_EL2_TRCIMSPECn	|
+		   HDFGWTR_EL2_TRCCNTVRn	|
+		   HDFGWTR_EL2_TRCCLAIM		|
+		   HDFGWTR_EL2_TRCAUXCTLR	|
+		   HDFGWTR_EL2_TRC,
+		   FEAT_TRC_SR),
+	NEEDS_FEAT(HDFGWTR_EL2_PMUSERENR_EL0	|
+		   HDFGWTR_EL2_PMCR_EL0		|
+		   HDFGWTR_EL2_PMSWINC_EL0	|
+		   HDFGWTR_EL2_PMSELR_EL0	|
+		   HDFGWTR_EL2_PMOVS		|
+		   HDFGWTR_EL2_PMINTEN		|
+		   HDFGWTR_EL2_PMCNTEN		|
+		   HDFGWTR_EL2_PMCCNTR_EL0	|
+		   HDFGWTR_EL2_PMCCFILTR_EL0	|
+		   HDFGWTR_EL2_PMEVTYPERn_EL0	|
+		   HDFGWTR_EL2_PMEVCNTRn_EL0,
+		   FEAT_PMUv3),
+	NEEDS_FEAT(HDFGWTR_EL2_TRBTRG_EL1	|
+		   HDFGWTR_EL2_TRBSR_EL1	|
+		   HDFGWTR_EL2_TRBPTR_EL1	|
+		   HDFGWTR_EL2_TRBMAR_EL1	|
+		   HDFGWTR_EL2_TRBLIMITR_EL1	|
+		   HDFGWTR_EL2_TRBBASER_EL1,
+		   FEAT_TRBE),
+	NEEDS_FEAT_FLAG(HDFGWTR_EL2_OSDLR_EL1,
+			NEVER_FGU, FEAT_DoubleLock),
+	NEEDS_FEAT_FLAG(HDFGWTR_EL2_OSECCR_EL1	|
+			HDFGWTR_EL2_OSLAR_EL1	|
+			HDFGWTR_EL2_DBGPRCR_EL1	|
+			HDFGWTR_EL2_DBGCLAIM	|
+			HDFGWTR_EL2_MDSCR_EL1	|
+			HDFGWTR_EL2_DBGWVRn_EL1	|
+			HDFGWTR_EL2_DBGWCRn_EL1	|
+			HDFGWTR_EL2_DBGBVRn_EL1	|
+			HDFGWTR_EL2_DBGBCRn_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+	NEEDS_FEAT(HDFGWTR_EL2_TRFCR_EL1, FEAT_TRF),
+};
+
+
+static const struct reg_bits_to_feat_map hfgitr_feat_map[] = {
+	NEEDS_FEAT(HFGITR_EL2_PSBCSYNC, FEAT_SPEv1p5),
+	NEEDS_FEAT(HFGITR_EL2_ATS1E1A, FEAT_ATS1A),
+	NEEDS_FEAT(HFGITR_EL2_COSPRCTX, FEAT_SPECRES2),
+	NEEDS_FEAT(HFGITR_EL2_nGCSEPP		|
+		   HFGITR_EL2_nGCSSTR_EL1	|
+		   HFGITR_EL2_nGCSPUSHM_EL1,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGITR_EL2_nBRBIALL		|
+		   HFGITR_EL2_nBRBINJ,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HFGITR_EL2_CPPRCTX		|
+		   HFGITR_EL2_DVPRCTX		|
+		   HFGITR_EL2_CFPRCTX,
+		   FEAT_SPECRES),
+	NEEDS_FEAT(HFGITR_EL2_TLBIRVAALE1	|
+		   HFGITR_EL2_TLBIRVALE1	|
+		   HFGITR_EL2_TLBIRVAAE1	|
+		   HFGITR_EL2_TLBIRVAE1		|
+		   HFGITR_EL2_TLBIRVAALE1IS	|
+		   HFGITR_EL2_TLBIRVALE1IS	|
+		   HFGITR_EL2_TLBIRVAAE1IS	|
+		   HFGITR_EL2_TLBIRVAE1IS	|
+		   HFGITR_EL2_TLBIRVAALE1OS	|
+		   HFGITR_EL2_TLBIRVALE1OS	|
+		   HFGITR_EL2_TLBIRVAAE1OS	|
+		   HFGITR_EL2_TLBIRVAE1OS,
+		   FEAT_TLBIRANGE),
+	NEEDS_FEAT(HFGITR_EL2_TLBIVAALE1OS	|
+		   HFGITR_EL2_TLBIVALE1OS	|
+		   HFGITR_EL2_TLBIVAAE1OS	|
+		   HFGITR_EL2_TLBIASIDE1OS	|
+		   HFGITR_EL2_TLBIVAE1OS	|
+		   HFGITR_EL2_TLBIVMALLE1OS,
+		   FEAT_TLBIOS),
+	NEEDS_FEAT(HFGITR_EL2_ATS1E1WP		|
+		   HFGITR_EL2_ATS1E1RP,
+		   FEAT_PAN2),
+	NEEDS_FEAT(HFGITR_EL2_DCCVADP, FEAT_DPB2),
+	NEEDS_FEAT_FLAG(HFGITR_EL2_DCCVAC	|
+			HFGITR_EL2_SVC_EL1	|
+			HFGITR_EL2_SVC_EL0	|
+			HFGITR_EL2_ERET		|
+			HFGITR_EL2_TLBIVAALE1	|
+			HFGITR_EL2_TLBIVALE1	|
+			HFGITR_EL2_TLBIVAAE1	|
+			HFGITR_EL2_TLBIASIDE1	|
+			HFGITR_EL2_TLBIVAE1	|
+			HFGITR_EL2_TLBIVMALLE1	|
+			HFGITR_EL2_TLBIVAALE1IS	|
+			HFGITR_EL2_TLBIVALE1IS	|
+			HFGITR_EL2_TLBIVAAE1IS	|
+			HFGITR_EL2_TLBIASIDE1IS	|
+			HFGITR_EL2_TLBIVAE1IS	|
+			HFGITR_EL2_TLBIVMALLE1IS|
+			HFGITR_EL2_ATS1E0W	|
+			HFGITR_EL2_ATS1E0R	|
+			HFGITR_EL2_ATS1E1W	|
+			HFGITR_EL2_ATS1E1R	|
+			HFGITR_EL2_DCZVA	|
+			HFGITR_EL2_DCCIVAC	|
+			HFGITR_EL2_DCCVAP	|
+			HFGITR_EL2_DCCVAU	|
+			HFGITR_EL2_DCCISW	|
+			HFGITR_EL2_DCCSW	|
+			HFGITR_EL2_DCISW	|
+			HFGITR_EL2_DCIVAC	|
+			HFGITR_EL2_ICIVAU	|
+			HFGITR_EL2_ICIALLU	|
+			HFGITR_EL2_ICIALLUIS,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+static const struct reg_bits_to_feat_map hafgrtr_feat_map[] = {
+	NEEDS_FEAT(HAFGRTR_EL2_AMEVTYPER115_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER114_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER113_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER112_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER111_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER110_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER19_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER18_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER17_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER16_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER15_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER14_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER13_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER12_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER11_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER10_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR115_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR114_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR113_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR112_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR111_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR110_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR19_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR18_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR17_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR16_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR15_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR14_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR13_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR12_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR11_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR10_EL0	|
+		   HAFGRTR_EL2_AMCNTEN1		|
+		   HAFGRTR_EL2_AMCNTEN0		|
+		   HAFGRTR_EL2_AMEVCNTR03_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR02_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR01_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR00_EL0,
+		   FEAT_AMUv1),
+};
+
+static const struct reg_bits_to_feat_map hfgitr2_feat_map[] = {
+	NEEDS_FEAT(HFGITR2_EL2_nDCCIVAPS, FEAT_PoPS),
+	NEEDS_FEAT(HFGITR2_EL2_TSBCSYNC, FEAT_TRBEv1p1)
+};
+
+static const struct reg_bits_to_feat_map hfgrtr2_feat_map[] = {
+	NEEDS_FEAT(HFGRTR2_EL2_nPFAR_EL1, FEAT_PFAR),
+	NEEDS_FEAT(HFGRTR2_EL2_nERXGSR_EL1, FEAT_RASv2),
+	NEEDS_FEAT(HFGRTR2_EL2_nACTLRALIAS_EL1	|
+		   HFGRTR2_EL2_nACTLRMASK_EL1	|
+		   HFGRTR2_EL2_nCPACRALIAS_EL1	|
+		   HFGRTR2_EL2_nCPACRMASK_EL1	|
+		   HFGRTR2_EL2_nSCTLR2MASK_EL1	|
+		   HFGRTR2_EL2_nSCTLRALIAS2_EL1	|
+		   HFGRTR2_EL2_nSCTLRALIAS_EL1	|
+		   HFGRTR2_EL2_nSCTLRMASK_EL1	|
+		   HFGRTR2_EL2_nTCR2ALIAS_EL1	|
+		   HFGRTR2_EL2_nTCR2MASK_EL1	|
+		   HFGRTR2_EL2_nTCRALIAS_EL1	|
+		   HFGRTR2_EL2_nTCRMASK_EL1,
+		   FEAT_SRMASK),
+	NEEDS_FEAT(HFGRTR2_EL2_nRCWSMASK_EL1, FEAT_THE),
+};
+
+static const struct reg_bits_to_feat_map hfgwtr2_feat_map[] = {
+	NEEDS_FEAT(HFGWTR2_EL2_nPFAR_EL1, FEAT_PFAR),
+	NEEDS_FEAT(HFGWTR2_EL2_nACTLRALIAS_EL1	|
+		   HFGWTR2_EL2_nACTLRMASK_EL1	|
+		   HFGWTR2_EL2_nCPACRALIAS_EL1	|
+		   HFGWTR2_EL2_nCPACRMASK_EL1	|
+		   HFGWTR2_EL2_nSCTLR2MASK_EL1	|
+		   HFGWTR2_EL2_nSCTLRALIAS2_EL1	|
+		   HFGWTR2_EL2_nSCTLRALIAS_EL1	|
+		   HFGWTR2_EL2_nSCTLRMASK_EL1	|
+		   HFGWTR2_EL2_nTCR2ALIAS_EL1	|
+		   HFGWTR2_EL2_nTCR2MASK_EL1	|
+		   HFGWTR2_EL2_nTCRALIAS_EL1	|
+		   HFGWTR2_EL2_nTCRMASK_EL1,
+		   FEAT_SRMASK),
+	NEEDS_FEAT(HFGWTR2_EL2_nRCWSMASK_EL1, FEAT_THE),
+};
+
+static const struct reg_bits_to_feat_map hdfgrtr2_feat_map[] = {
+	NEEDS_FEAT(HDFGRTR2_EL2_nMDSELR_EL1, FEAT_Debugv8p9),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMECR_EL1, feat_ebep_pmuv3_ss),
+	NEEDS_FEAT(HDFGRTR2_EL2_nTRCITECR_EL1, FEAT_ITE),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMICFILTR_EL0	|
+		   HDFGRTR2_EL2_nPMICNTR_EL0,
+		   FEAT_PMUv3_ICNTR),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMUACR_EL1, FEAT_PMUv3p9),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMSSCR_EL1	|
+		   HDFGRTR2_EL2_nPMSSDATA,
+		   FEAT_PMUv3_SS),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMIAR_EL1, FEAT_SEBEP),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMSDSFR_EL1, feat_spe_fds),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMBMAR_EL1, FEAT_SPE_nVM),
+	NEEDS_FEAT(HDFGRTR2_EL2_nSPMACCESSR_EL1	|
+		   HDFGRTR2_EL2_nSPMCNTEN	|
+		   HDFGRTR2_EL2_nSPMCR_EL0	|
+		   HDFGRTR2_EL2_nSPMDEVAFF_EL1	|
+		   HDFGRTR2_EL2_nSPMEVCNTRn_EL0	|
+		   HDFGRTR2_EL2_nSPMEVTYPERn_EL0|
+		   HDFGRTR2_EL2_nSPMID		|
+		   HDFGRTR2_EL2_nSPMINTEN	|
+		   HDFGRTR2_EL2_nSPMOVS		|
+		   HDFGRTR2_EL2_nSPMSCR_EL1	|
+		   HDFGRTR2_EL2_nSPMSELR_EL0,
+		   FEAT_SPMU),
+	NEEDS_FEAT(HDFGRTR2_EL2_nMDSTEPOP_EL1, FEAT_STEP2),
+	NEEDS_FEAT(HDFGRTR2_EL2_nTRBMPAM_EL1, feat_trbe_mpam),
+};
+
+static const struct reg_bits_to_feat_map hdfgwtr2_feat_map[] = {
+	NEEDS_FEAT(HDFGWTR2_EL2_nMDSELR_EL1, FEAT_Debugv8p9),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMECR_EL1, feat_ebep_pmuv3_ss),
+	NEEDS_FEAT(HDFGWTR2_EL2_nTRCITECR_EL1, FEAT_ITE),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMICFILTR_EL0	|
+		   HDFGWTR2_EL2_nPMICNTR_EL0,
+		   FEAT_PMUv3_ICNTR),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMUACR_EL1	|
+		   HDFGWTR2_EL2_nPMZR_EL0,
+		   FEAT_PMUv3p9),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMSSCR_EL1, FEAT_PMUv3_SS),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMIAR_EL1, FEAT_SEBEP),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMSDSFR_EL1, feat_spe_fds),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMBMAR_EL1, FEAT_SPE_nVM),
+	NEEDS_FEAT(HDFGWTR2_EL2_nSPMACCESSR_EL1	|
+		   HDFGWTR2_EL2_nSPMCNTEN	|
+		   HDFGWTR2_EL2_nSPMCR_EL0	|
+		   HDFGWTR2_EL2_nSPMEVCNTRn_EL0	|
+		   HDFGWTR2_EL2_nSPMEVTYPERn_EL0|
+		   HDFGWTR2_EL2_nSPMINTEN	|
+		   HDFGWTR2_EL2_nSPMOVS		|
+		   HDFGWTR2_EL2_nSPMSCR_EL1	|
+		   HDFGWTR2_EL2_nSPMSELR_EL0,
+		   FEAT_SPMU),
+	NEEDS_FEAT(HDFGWTR2_EL2_nMDSTEPOP_EL1, FEAT_STEP2),
+	NEEDS_FEAT(HDFGWTR2_EL2_nTRBMPAM_EL1, feat_trbe_mpam),
+};
+
+static const struct reg_bits_to_feat_map hcrx_feat_map[] = {
+	NEEDS_FEAT(HCRX_EL2_PACMEn, feat_pauth_lr),
+	NEEDS_FEAT(HCRX_EL2_EnFPM, FEAT_FPMR),
+	NEEDS_FEAT(HCRX_EL2_GCSEn, FEAT_GCS),
+	NEEDS_FEAT(HCRX_EL2_EnIDCP128, FEAT_SYSREG128),
+	NEEDS_FEAT(HCRX_EL2_EnSDERR, feat_aderr),
+	NEEDS_FEAT(HCRX_EL2_TMEA, FEAT_DoubleFault2),
+	NEEDS_FEAT(HCRX_EL2_EnSNERR, feat_anerr),
+	NEEDS_FEAT(HCRX_EL2_D128En, FEAT_D128),
+	NEEDS_FEAT(HCRX_EL2_PTTWI, FEAT_THE),
+	NEEDS_FEAT(HCRX_EL2_SCTLR2En, FEAT_SCTLR2),
+	NEEDS_FEAT(HCRX_EL2_TCR2En, FEAT_TCR2),
+	NEEDS_FEAT(HCRX_EL2_MSCEn		|
+		   HCRX_EL2_MCE2,
+		   FEAT_MOPS),
+	NEEDS_FEAT(HCRX_EL2_CMOW, FEAT_CMOW),
+	NEEDS_FEAT(HCRX_EL2_VFNMI		|
+		   HCRX_EL2_VINMI		|
+		   HCRX_EL2_TALLINT,
+		   FEAT_NMI),
+	NEEDS_FEAT(HCRX_EL2_SMPME, feat_sme_smps),
+	NEEDS_FEAT(HCRX_EL2_FGTnXS		|
+		   HCRX_EL2_FnXS,
+		   FEAT_XS),
+	NEEDS_FEAT(HCRX_EL2_EnASR, FEAT_LS64_V),
+	NEEDS_FEAT(HCRX_EL2_EnALS, FEAT_LS64),
+	NEEDS_FEAT(HCRX_EL2_EnAS0, FEAT_LS64_ACCDATA),
+};
+
+static const struct reg_bits_to_feat_map hcr_feat_map[] = {
+	NEEDS_FEAT(HCR_EL2_TID0, FEAT_AA32EL0),
+	NEEDS_FEAT_FIXED(HCR_EL2_RW, compute_hcr_rw),
+	NEEDS_FEAT(HCR_EL2_HCD, not_feat_aa64el3),
+	NEEDS_FEAT(HCR_EL2_AMO		|
+		   HCR_EL2_BSU		|
+		   HCR_EL2_CD		|
+		   HCR_EL2_DC		|
+		   HCR_EL2_FB		|
+		   HCR_EL2_FMO		|
+		   HCR_EL2_ID		|
+		   HCR_EL2_IMO		|
+		   HCR_EL2_MIOCNCE	|
+		   HCR_EL2_PTW		|
+		   HCR_EL2_SWIO		|
+		   HCR_EL2_TACR		|
+		   HCR_EL2_TDZ		|
+		   HCR_EL2_TGE		|
+		   HCR_EL2_TID1		|
+		   HCR_EL2_TID2		|
+		   HCR_EL2_TID3		|
+		   HCR_EL2_TIDCP	|
+		   HCR_EL2_TPCP		|
+		   HCR_EL2_TPU		|
+		   HCR_EL2_TRVM		|
+		   HCR_EL2_TSC		|
+		   HCR_EL2_TSW		|
+		   HCR_EL2_TTLB		|
+		   HCR_EL2_TVM		|
+		   HCR_EL2_TWE		|
+		   HCR_EL2_TWI		|
+		   HCR_EL2_VF		|
+		   HCR_EL2_VI		|
+		   HCR_EL2_VM		|
+		   HCR_EL2_VSE,
+		   FEAT_AA64EL1),
+	NEEDS_FEAT(HCR_EL2_AMVOFFEN, FEAT_AMUv1p1),
+	NEEDS_FEAT(HCR_EL2_EnSCXT, feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HCR_EL2_TICAB	|
+		   HCR_EL2_TID4		|
+		   HCR_EL2_TOCU,
+		   FEAT_EVT),
+	NEEDS_FEAT(HCR_EL2_TTLBIS	|
+		   HCR_EL2_TTLBOS,
+		   FEAT_EVT_TTLBxS),
+	NEEDS_FEAT(HCR_EL2_TLOR, FEAT_LOR),
+	NEEDS_FEAT(HCR_EL2_ATA		|
+		   HCR_EL2_DCT		|
+		   HCR_EL2_TID5,
+		   FEAT_MTE2),
+	NEEDS_FEAT(HCR_EL2_AT		| /* Ignore the original FEAT_NV */
+		   HCR_EL2_NV2		|
+		   HCR_EL2_NV,
+		   feat_nv2),
+	NEEDS_FEAT(HCR_EL2_NV1, feat_nv2_e2h0_ni), /* Missing from JSON */
+	NEEDS_FEAT(HCR_EL2_API		|
+		   HCR_EL2_APK,
+		   feat_pauth),
+	NEEDS_FEAT(HCR_EL2_TEA		|
+		   HCR_EL2_TERR,
+		   FEAT_RAS),
+	NEEDS_FEAT(HCR_EL2_FIEN, feat_rasv1p1),
+	NEEDS_FEAT(HCR_EL2_GPF, FEAT_RME),
+	NEEDS_FEAT(HCR_EL2_FWB, FEAT_S2FWB),
+	NEEDS_FEAT(HCR_EL2_TME, FEAT_TME),
+	NEEDS_FEAT(HCR_EL2_TWEDEL	|
+		   HCR_EL2_TWEDEn,
+		   FEAT_TWED),
+	NEEDS_FEAT_FIXED(HCR_EL2_E2H, compute_hcr_e2h),
+};
+
+static void __init check_feat_map(const struct reg_bits_to_feat_map *map,
+				  int map_size, u64 res0, const char *str)
+{
+	u64 mask = 0;
+
+	for (int i = 0; i < map_size; i++)
+		mask |= map[i].bits;
+
+	if (mask != ~res0)
+		kvm_err("Undefined %s behaviour, bits %016llx\n",
+			str, mask ^ ~res0);
+}
+
+void __init check_feature_map(void)
+{
+	check_feat_map(hfgrtr_feat_map, ARRAY_SIZE(hfgrtr_feat_map),
+		       hfgrtr_masks.res0, hfgrtr_masks.str);
+	check_feat_map(hfgwtr_feat_map, ARRAY_SIZE(hfgwtr_feat_map),
+		       hfgwtr_masks.res0, hfgwtr_masks.str);
+	check_feat_map(hfgitr_feat_map, ARRAY_SIZE(hfgitr_feat_map),
+		       hfgitr_masks.res0, hfgitr_masks.str);
+	check_feat_map(hdfgrtr_feat_map, ARRAY_SIZE(hdfgrtr_feat_map),
+		       hdfgrtr_masks.res0, hdfgrtr_masks.str);
+	check_feat_map(hdfgwtr_feat_map, ARRAY_SIZE(hdfgwtr_feat_map),
+		       hdfgwtr_masks.res0, hdfgwtr_masks.str);
+	check_feat_map(hafgrtr_feat_map, ARRAY_SIZE(hafgrtr_feat_map),
+		       hafgrtr_masks.res0, hafgrtr_masks.str);
+	check_feat_map(hcrx_feat_map, ARRAY_SIZE(hcrx_feat_map),
+		       __HCRX_EL2_RES0, "HCRX_EL2");
+	check_feat_map(hcr_feat_map, ARRAY_SIZE(hcr_feat_map),
+		       HCR_EL2_RES0, "HCR_EL2");
+}
+
+static bool idreg_feat_match(struct kvm *kvm, const struct reg_bits_to_feat_map *map)
+{
+	u64 regval = kvm->arch.id_regs[map->regidx];
+	u64 regfld = (regval >> map->shift) & GENMASK(map->width - 1, 0);
+
+	if (map->sign) {
+		s64 sfld = sign_extend64(regfld, map->width - 1);
+		s64 slim = sign_extend64(map->lo_lim, map->width - 1);
+		return sfld >= slim;
+	} else {
+		return regfld >= map->lo_lim;
+	}
+}
+
+static u64 __compute_fixed_bits(struct kvm *kvm,
+				const struct reg_bits_to_feat_map *map,
+				int map_size,
+				u64 *fixed_bits,
+				unsigned long require,
+				unsigned long exclude)
+{
+	u64 val = 0;
+
+	for (int i = 0; i < map_size; i++) {
+		bool match;
+
+		if ((map[i].flags & require) != require)
+			continue;
+
+		if (map[i].flags & exclude)
+			continue;
+
+		if (map[i].flags & CALL_FUNC)
+			match = (map[i].flags & FIXED_VALUE) ?
+				map[i].fval(kvm, fixed_bits) :
+				map[i].match(kvm);
+		else
+			match = idreg_feat_match(kvm, &map[i]);
+
+		if (!match || (map[i].flags & FIXED_VALUE))
+			val |= map[i].bits;
+	}
+
+	return val;
+}
+
+static u64 compute_res0_bits(struct kvm *kvm,
+			     const struct reg_bits_to_feat_map *map,
+			     int map_size,
+			     unsigned long require,
+			     unsigned long exclude)
+{
+	return __compute_fixed_bits(kvm, map, map_size, NULL,
+				    require, exclude | FIXED_VALUE);
+}
+
+static u64 compute_fixed_bits(struct kvm *kvm,
+			      const struct reg_bits_to_feat_map *map,
+			      int map_size,
+			      u64 *fixed_bits,
+			      unsigned long require,
+			      unsigned long exclude)
+{
+	return __compute_fixed_bits(kvm, map, map_size, fixed_bits,
+				    require | FIXED_VALUE, exclude);
+}
+
+void compute_fgu(struct kvm *kvm, enum fgt_group_id fgt)
+{
+	u64 val = 0;
+
+	switch (fgt) {
+	case HFGRTR_GROUP:
+		val |= compute_res0_bits(kvm, hfgrtr_feat_map,
+					 ARRAY_SIZE(hfgrtr_feat_map),
+					 0, NEVER_FGU);
+		val |= compute_res0_bits(kvm, hfgwtr_feat_map,
+					 ARRAY_SIZE(hfgwtr_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HFGITR_GROUP:
+		val |= compute_res0_bits(kvm, hfgitr_feat_map,
+					 ARRAY_SIZE(hfgitr_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HDFGRTR_GROUP:
+		val |= compute_res0_bits(kvm, hdfgrtr_feat_map,
+					 ARRAY_SIZE(hdfgrtr_feat_map),
+					 0, NEVER_FGU);
+		val |= compute_res0_bits(kvm, hdfgwtr_feat_map,
+					 ARRAY_SIZE(hdfgwtr_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HAFGRTR_GROUP:
+		val |= compute_res0_bits(kvm, hafgrtr_feat_map,
+					 ARRAY_SIZE(hafgrtr_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HFGRTR2_GROUP:
+		val |= compute_res0_bits(kvm, hfgrtr2_feat_map,
+					 ARRAY_SIZE(hfgrtr2_feat_map),
+					 0, NEVER_FGU);
+		val |= compute_res0_bits(kvm, hfgwtr2_feat_map,
+					 ARRAY_SIZE(hfgwtr2_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HFGITR2_GROUP:
+		val |= compute_res0_bits(kvm, hfgitr2_feat_map,
+					 ARRAY_SIZE(hfgitr2_feat_map),
+					 0, NEVER_FGU);
+		break;
+	case HDFGRTR2_GROUP:
+		val |= compute_res0_bits(kvm, hdfgrtr2_feat_map,
+					 ARRAY_SIZE(hdfgrtr2_feat_map),
+					 0, NEVER_FGU);
+		val |= compute_res0_bits(kvm, hdfgwtr2_feat_map,
+					 ARRAY_SIZE(hdfgwtr2_feat_map),
+					 0, NEVER_FGU);
+		break;
+	default:
+		BUG();
+	}
+
+	kvm->arch.fgu[fgt] = val;
+}
+
+void get_reg_fixed_bits(struct kvm *kvm, enum vcpu_sysreg reg, u64 *res0, u64 *res1)
+{
+	u64 fixed = 0, mask;
+
+	switch (reg) {
+	case HFGRTR_EL2:
+		*res0 = compute_res0_bits(kvm, hfgrtr_feat_map,
+					  ARRAY_SIZE(hfgrtr_feat_map), 0, 0);
+		*res0 |= hfgrtr_masks.res0;
+		*res1 = HFGRTR_EL2_RES1;
+		break;
+	case HFGWTR_EL2:
+		*res0 = compute_res0_bits(kvm, hfgwtr_feat_map,
+					  ARRAY_SIZE(hfgwtr_feat_map), 0, 0);
+		*res0 |= hfgwtr_masks.res0;
+		*res1 = HFGWTR_EL2_RES1;
+		break;
+	case HFGITR_EL2:
+		*res0 = compute_res0_bits(kvm, hfgitr_feat_map,
+					  ARRAY_SIZE(hfgitr_feat_map), 0, 0);
+		*res0 |= hfgitr_masks.res0;
+		*res1 = HFGITR_EL2_RES1;
+		break;
+	case HDFGRTR_EL2:
+		*res0 = compute_res0_bits(kvm, hdfgrtr_feat_map,
+					  ARRAY_SIZE(hdfgrtr_feat_map), 0, 0);
+		*res0 |= hdfgrtr_masks.res0;
+		*res1 = HDFGRTR_EL2_RES1;
+		break;
+	case HDFGWTR_EL2:
+		*res0 = compute_res0_bits(kvm, hdfgwtr_feat_map,
+					  ARRAY_SIZE(hdfgwtr_feat_map), 0, 0);
+		*res0 |= hdfgwtr_masks.res0;
+		*res1 = HDFGWTR_EL2_RES1;
+		break;
+	case HAFGRTR_EL2:
+		*res0 = compute_res0_bits(kvm, hafgrtr_feat_map,
+					  ARRAY_SIZE(hafgrtr_feat_map), 0, 0);
+		*res0 |= hafgrtr_masks.res0;
+		*res1 = HAFGRTR_EL2_RES1;
+		break;
+	case HFGRTR2_EL2:
+		*res0 = compute_res0_bits(kvm, hfgrtr2_feat_map,
+					  ARRAY_SIZE(hfgrtr2_feat_map), 0, 0);
+		*res0 |= hfgrtr2_masks.res0;
+		*res1 = HFGRTR2_EL2_RES1;
+		break;
+	case HFGWTR2_EL2:
+		*res0 = compute_res0_bits(kvm, hfgwtr2_feat_map,
+					  ARRAY_SIZE(hfgwtr2_feat_map), 0, 0);
+		*res0 |= hfgwtr2_masks.res0;
+		*res1 = HFGWTR2_EL2_RES1;
+		break;
+	case HFGITR2_EL2:
+		*res0 = compute_res0_bits(kvm, hfgitr2_feat_map,
+					  ARRAY_SIZE(hfgitr2_feat_map), 0, 0);
+		*res0 |= hfgitr2_masks.res0;
+		*res1 = HFGITR2_EL2_RES1;
+		break;
+	case HDFGRTR2_EL2:
+		*res0 = compute_res0_bits(kvm, hdfgrtr2_feat_map,
+					  ARRAY_SIZE(hdfgrtr2_feat_map), 0, 0);
+		*res0 |= hdfgrtr2_masks.res0;
+		*res1 = HDFGRTR2_EL2_RES1;
+		break;
+	case HDFGWTR2_EL2:
+		*res0 = compute_res0_bits(kvm, hdfgwtr2_feat_map,
+					  ARRAY_SIZE(hdfgwtr2_feat_map), 0, 0);
+		*res0 |= hdfgwtr2_masks.res0;
+		*res1 = HDFGWTR2_EL2_RES1;
+		break;
+	case HCRX_EL2:
+		*res0 = compute_res0_bits(kvm, hcrx_feat_map,
+					  ARRAY_SIZE(hcrx_feat_map), 0, 0);
+		*res0 |= __HCRX_EL2_RES0;
+		*res1 = __HCRX_EL2_RES1;
+		break;
+	case HCR_EL2:
+		mask = compute_fixed_bits(kvm, hcr_feat_map,
+					  ARRAY_SIZE(hcr_feat_map), &fixed,
+					  0, 0);
+		*res0 = compute_res0_bits(kvm, hcr_feat_map,
+					  ARRAY_SIZE(hcr_feat_map), 0, 0);
+		*res0 |= HCR_EL2_RES0 | (mask & ~fixed);
+		*res1 = HCR_EL2_RES1 | (mask & fixed);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		*res0 = *res1 = 0;
+		break;
+	}
+}
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/debug.c linux-libre-6.16-gnu/arch/arm64/kvm/debug.c
index 0e4c805e7e89..1a7dab333f55 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/debug.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/debug.c
@@ -216,9 +216,9 @@ void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu)
 void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val)
 {
 	if (val & OSLAR_EL1_OSLK)
-		__vcpu_sys_reg(vcpu, OSLSR_EL1) |= OSLSR_EL1_OSLK;
+		__vcpu_rmw_sys_reg(vcpu, OSLSR_EL1, |=, OSLSR_EL1_OSLK);
 	else
-		__vcpu_sys_reg(vcpu, OSLSR_EL1) &= ~OSLSR_EL1_OSLK;
+		__vcpu_rmw_sys_reg(vcpu, OSLSR_EL1, &=, ~OSLSR_EL1_OSLK);
 
 	preempt_disable();
 	kvm_arch_vcpu_put(vcpu);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/emulate-nested.c linux-libre-6.16-gnu/arch/arm64/kvm/emulate-nested.c
index 0fcfcc0478f9..3a384e9660b8 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/emulate-nested.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/emulate-nested.c
@@ -622,6 +622,11 @@ struct encoding_to_trap_config {
 	const unsigned int		line;
 };
 
+/*
+ * WARNING: using ranges is a treacherous endeavour, as sysregs that
+ * are part of an architectural range are not necessarily contiguous
+ * in the [Op0,Op1,CRn,CRm,Ops] space. Tread carefully.
+ */
 #define SR_RANGE_TRAP(sr_start, sr_end, trap_id)			\
 	{								\
 		.encoding	= sr_start,				\
@@ -1279,98 +1284,128 @@ enum fg_filter_id {
 	__NR_FG_FILTER_IDS__
 };
 
-#define SR_FGF(sr, g, b, p, f)					\
-	{							\
-		.encoding	= sr,				\
-		.end		= sr,				\
-		.tc		= {				\
+#define __FGT(g, b, p, f)					\
+		{						\
 			.fgt = g ## _GROUP,			\
 			.bit = g ## _EL2_ ## b ## _SHIFT,	\
 			.pol = p,				\
 			.fgf = f,				\
-		},						\
+		}
+
+#define FGT(g, b, p)		__FGT(g, b, p, __NO_FGF__)
+
+/*
+ * See the warning next to SR_RANGE_TRAP(), and apply the same
+ * level of caution.
+ */
+#define SR_FGF_RANGE(sr, e, g, b, p, f)				\
+	{							\
+		.encoding	= sr,				\
+		.end		= e,				\
+		.tc		= __FGT(g, b, p, f),		\
 		.line = __LINE__,				\
 	}
 
-#define SR_FGT(sr, g, b, p)	SR_FGF(sr, g, b, p, __NO_FGF__)
+#define SR_FGF(sr, g, b, p, f) 	SR_FGF_RANGE(sr, sr, g, b, p, f)
+#define SR_FGT(sr, g, b, p)	SR_FGF_RANGE(sr, sr, g, b, p, __NO_FGF__)
+#define SR_FGT_RANGE(sr, end, g, b, p)	\
+				SR_FGF_RANGE(sr, end, g, b, p, __NO_FGF__)
 
 static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	/* HFGRTR_EL2, HFGWTR_EL2 */
-	SR_FGT(SYS_AMAIR2_EL1,		HFGxTR, nAMAIR2_EL1, 0),
-	SR_FGT(SYS_MAIR2_EL1,		HFGxTR, nMAIR2_EL1, 0),
-	SR_FGT(SYS_S2POR_EL1,		HFGxTR, nS2POR_EL1, 0),
-	SR_FGT(SYS_POR_EL1,		HFGxTR, nPOR_EL1, 0),
-	SR_FGT(SYS_POR_EL0,		HFGxTR, nPOR_EL0, 0),
-	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
-	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
-	SR_FGT(SYS_RCWMASK_EL1,		HFGxTR, nRCWMASK_EL1, 0),
-	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
-	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
-	SR_FGT(SYS_GCSCR_EL1,		HFGxTR, nGCS_EL1, 0),
-	SR_FGT(SYS_GCSPR_EL1,		HFGxTR, nGCS_EL1, 0),
-	SR_FGT(SYS_GCSCRE0_EL1,		HFGxTR, nGCS_EL0, 0),
-	SR_FGT(SYS_GCSPR_EL0,		HFGxTR, nGCS_EL0, 0),
-	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
-	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
-	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
-	SR_FGT(SYS_ERXPFGCTL_EL1,	HFGxTR, ERXPFGCTL_EL1, 1),
-	SR_FGT(SYS_ERXPFGF_EL1,		HFGxTR, ERXPFGF_EL1, 1),
-	SR_FGT(SYS_ERXMISC0_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC1_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC2_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC3_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXSTATUS_EL1,	HFGxTR, ERXSTATUS_EL1, 1),
-	SR_FGT(SYS_ERXCTLR_EL1,		HFGxTR, ERXCTLR_EL1, 1),
-	SR_FGT(SYS_ERXFR_EL1,		HFGxTR, ERXFR_EL1, 1),
-	SR_FGT(SYS_ERRSELR_EL1,		HFGxTR, ERRSELR_EL1, 1),
-	SR_FGT(SYS_ERRIDR_EL1,		HFGxTR, ERRIDR_EL1, 1),
-	SR_FGT(SYS_ICC_IGRPEN0_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
-	SR_FGT(SYS_ICC_IGRPEN1_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
-	SR_FGT(SYS_VBAR_EL1,		HFGxTR, VBAR_EL1, 1),
-	SR_FGT(SYS_TTBR1_EL1,		HFGxTR, TTBR1_EL1, 1),
-	SR_FGT(SYS_TTBR0_EL1,		HFGxTR, TTBR0_EL1, 1),
-	SR_FGT(SYS_TPIDR_EL0,		HFGxTR, TPIDR_EL0, 1),
-	SR_FGT(SYS_TPIDRRO_EL0,		HFGxTR, TPIDRRO_EL0, 1),
-	SR_FGT(SYS_TPIDR_EL1,		HFGxTR, TPIDR_EL1, 1),
-	SR_FGT(SYS_TCR_EL1,		HFGxTR, TCR_EL1, 1),
-	SR_FGT(SYS_TCR2_EL1,		HFGxTR, TCR_EL1, 1),
-	SR_FGT(SYS_SCXTNUM_EL0,		HFGxTR, SCXTNUM_EL0, 1),
-	SR_FGT(SYS_SCXTNUM_EL1, 	HFGxTR, SCXTNUM_EL1, 1),
-	SR_FGT(SYS_SCTLR_EL1, 		HFGxTR, SCTLR_EL1, 1),
-	SR_FGT(SYS_REVIDR_EL1, 		HFGxTR, REVIDR_EL1, 1),
-	SR_FGT(SYS_PAR_EL1, 		HFGxTR, PAR_EL1, 1),
-	SR_FGT(SYS_MPIDR_EL1, 		HFGxTR, MPIDR_EL1, 1),
-	SR_FGT(SYS_MIDR_EL1, 		HFGxTR, MIDR_EL1, 1),
-	SR_FGT(SYS_MAIR_EL1, 		HFGxTR, MAIR_EL1, 1),
-	SR_FGT(SYS_LORSA_EL1, 		HFGxTR, LORSA_EL1, 1),
-	SR_FGT(SYS_LORN_EL1, 		HFGxTR, LORN_EL1, 1),
-	SR_FGT(SYS_LORID_EL1, 		HFGxTR, LORID_EL1, 1),
-	SR_FGT(SYS_LOREA_EL1, 		HFGxTR, LOREA_EL1, 1),
-	SR_FGT(SYS_LORC_EL1, 		HFGxTR, LORC_EL1, 1),
-	SR_FGT(SYS_ISR_EL1, 		HFGxTR, ISR_EL1, 1),
-	SR_FGT(SYS_FAR_EL1, 		HFGxTR, FAR_EL1, 1),
-	SR_FGT(SYS_ESR_EL1, 		HFGxTR, ESR_EL1, 1),
-	SR_FGT(SYS_DCZID_EL0, 		HFGxTR, DCZID_EL0, 1),
-	SR_FGT(SYS_CTR_EL0, 		HFGxTR, CTR_EL0, 1),
-	SR_FGT(SYS_CSSELR_EL1, 		HFGxTR, CSSELR_EL1, 1),
-	SR_FGT(SYS_CPACR_EL1, 		HFGxTR, CPACR_EL1, 1),
-	SR_FGT(SYS_CONTEXTIDR_EL1, 	HFGxTR, CONTEXTIDR_EL1, 1),
-	SR_FGT(SYS_CLIDR_EL1, 		HFGxTR, CLIDR_EL1, 1),
-	SR_FGT(SYS_CCSIDR_EL1, 		HFGxTR, CCSIDR_EL1, 1),
-	SR_FGT(SYS_APIBKEYLO_EL1, 	HFGxTR, APIBKey, 1),
-	SR_FGT(SYS_APIBKEYHI_EL1, 	HFGxTR, APIBKey, 1),
-	SR_FGT(SYS_APIAKEYLO_EL1, 	HFGxTR, APIAKey, 1),
-	SR_FGT(SYS_APIAKEYHI_EL1, 	HFGxTR, APIAKey, 1),
-	SR_FGT(SYS_APGAKEYLO_EL1, 	HFGxTR, APGAKey, 1),
-	SR_FGT(SYS_APGAKEYHI_EL1, 	HFGxTR, APGAKey, 1),
-	SR_FGT(SYS_APDBKEYLO_EL1, 	HFGxTR, APDBKey, 1),
-	SR_FGT(SYS_APDBKEYHI_EL1, 	HFGxTR, APDBKey, 1),
-	SR_FGT(SYS_APDAKEYLO_EL1, 	HFGxTR, APDAKey, 1),
-	SR_FGT(SYS_APDAKEYHI_EL1, 	HFGxTR, APDAKey, 1),
-	SR_FGT(SYS_AMAIR_EL1, 		HFGxTR, AMAIR_EL1, 1),
-	SR_FGT(SYS_AIDR_EL1, 		HFGxTR, AIDR_EL1, 1),
-	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
-	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
+	SR_FGT(SYS_AMAIR2_EL1,		HFGRTR, nAMAIR2_EL1, 0),
+	SR_FGT(SYS_MAIR2_EL1,		HFGRTR, nMAIR2_EL1, 0),
+	SR_FGT(SYS_S2POR_EL1,		HFGRTR, nS2POR_EL1, 0),
+	SR_FGT(SYS_POR_EL1,		HFGRTR, nPOR_EL1, 0),
+	SR_FGT(SYS_POR_EL0,		HFGRTR, nPOR_EL0, 0),
+	SR_FGT(SYS_PIR_EL1,		HFGRTR, nPIR_EL1, 0),
+	SR_FGT(SYS_PIRE0_EL1,		HFGRTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_RCWMASK_EL1,		HFGRTR, nRCWMASK_EL1, 0),
+	SR_FGT(SYS_TPIDR2_EL0,		HFGRTR, nTPIDR2_EL0, 0),
+	SR_FGT(SYS_SMPRI_EL1,		HFGRTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_GCSCR_EL1,		HFGRTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSPR_EL1,		HFGRTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSCRE0_EL1,		HFGRTR, nGCS_EL0, 0),
+	SR_FGT(SYS_GCSPR_EL0,		HFGRTR, nGCS_EL0, 0),
+	SR_FGT(SYS_ACCDATA_EL1,		HFGRTR, nACCDATA_EL1, 0),
+	SR_FGT(SYS_ERXADDR_EL1,		HFGRTR, ERXADDR_EL1, 1),
+	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGRTR, ERXPFGCDN_EL1, 1),
+	SR_FGT(SYS_ERXPFGCTL_EL1,	HFGRTR, ERXPFGCTL_EL1, 1),
+	SR_FGT(SYS_ERXPFGF_EL1,		HFGRTR, ERXPFGF_EL1, 1),
+	SR_FGT(SYS_ERXMISC0_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC1_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC2_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC3_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXSTATUS_EL1,	HFGRTR, ERXSTATUS_EL1, 1),
+	SR_FGT(SYS_ERXCTLR_EL1,		HFGRTR, ERXCTLR_EL1, 1),
+	SR_FGT(SYS_ERXFR_EL1,		HFGRTR, ERXFR_EL1, 1),
+	SR_FGT(SYS_ERRSELR_EL1,		HFGRTR, ERRSELR_EL1, 1),
+	SR_FGT(SYS_ERRIDR_EL1,		HFGRTR, ERRIDR_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN0_EL1,	HFGRTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN1_EL1,	HFGRTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_VBAR_EL1,		HFGRTR, VBAR_EL1, 1),
+	SR_FGT(SYS_TTBR1_EL1,		HFGRTR, TTBR1_EL1, 1),
+	SR_FGT(SYS_TTBR0_EL1,		HFGRTR, TTBR0_EL1, 1),
+	SR_FGT(SYS_TPIDR_EL0,		HFGRTR, TPIDR_EL0, 1),
+	SR_FGT(SYS_TPIDRRO_EL0,		HFGRTR, TPIDRRO_EL0, 1),
+	SR_FGT(SYS_TPIDR_EL1,		HFGRTR, TPIDR_EL1, 1),
+	SR_FGT(SYS_TCR_EL1,		HFGRTR, TCR_EL1, 1),
+	SR_FGT(SYS_TCR2_EL1,		HFGRTR, TCR_EL1, 1),
+	SR_FGT(SYS_SCXTNUM_EL0,		HFGRTR, SCXTNUM_EL0, 1),
+	SR_FGT(SYS_SCXTNUM_EL1, 	HFGRTR, SCXTNUM_EL1, 1),
+	SR_FGT(SYS_SCTLR_EL1, 		HFGRTR, SCTLR_EL1, 1),
+	SR_FGT(SYS_REVIDR_EL1, 		HFGRTR, REVIDR_EL1, 1),
+	SR_FGT(SYS_PAR_EL1, 		HFGRTR, PAR_EL1, 1),
+	SR_FGT(SYS_MPIDR_EL1, 		HFGRTR, MPIDR_EL1, 1),
+	SR_FGT(SYS_MIDR_EL1, 		HFGRTR, MIDR_EL1, 1),
+	SR_FGT(SYS_MAIR_EL1, 		HFGRTR, MAIR_EL1, 1),
+	SR_FGT(SYS_LORSA_EL1, 		HFGRTR, LORSA_EL1, 1),
+	SR_FGT(SYS_LORN_EL1, 		HFGRTR, LORN_EL1, 1),
+	SR_FGT(SYS_LORID_EL1, 		HFGRTR, LORID_EL1, 1),
+	SR_FGT(SYS_LOREA_EL1, 		HFGRTR, LOREA_EL1, 1),
+	SR_FGT(SYS_LORC_EL1, 		HFGRTR, LORC_EL1, 1),
+	SR_FGT(SYS_ISR_EL1, 		HFGRTR, ISR_EL1, 1),
+	SR_FGT(SYS_FAR_EL1, 		HFGRTR, FAR_EL1, 1),
+	SR_FGT(SYS_ESR_EL1, 		HFGRTR, ESR_EL1, 1),
+	SR_FGT(SYS_DCZID_EL0, 		HFGRTR, DCZID_EL0, 1),
+	SR_FGT(SYS_CTR_EL0, 		HFGRTR, CTR_EL0, 1),
+	SR_FGT(SYS_CSSELR_EL1, 		HFGRTR, CSSELR_EL1, 1),
+	SR_FGT(SYS_CPACR_EL1, 		HFGRTR, CPACR_EL1, 1),
+	SR_FGT(SYS_CONTEXTIDR_EL1, 	HFGRTR, CONTEXTIDR_EL1, 1),
+	SR_FGT(SYS_CLIDR_EL1, 		HFGRTR, CLIDR_EL1, 1),
+	SR_FGT(SYS_CCSIDR_EL1, 		HFGRTR, CCSIDR_EL1, 1),
+	SR_FGT(SYS_APIBKEYLO_EL1, 	HFGRTR, APIBKey, 1),
+	SR_FGT(SYS_APIBKEYHI_EL1, 	HFGRTR, APIBKey, 1),
+	SR_FGT(SYS_APIAKEYLO_EL1, 	HFGRTR, APIAKey, 1),
+	SR_FGT(SYS_APIAKEYHI_EL1, 	HFGRTR, APIAKey, 1),
+	SR_FGT(SYS_APGAKEYLO_EL1, 	HFGRTR, APGAKey, 1),
+	SR_FGT(SYS_APGAKEYHI_EL1, 	HFGRTR, APGAKey, 1),
+	SR_FGT(SYS_APDBKEYLO_EL1, 	HFGRTR, APDBKey, 1),
+	SR_FGT(SYS_APDBKEYHI_EL1, 	HFGRTR, APDBKey, 1),
+	SR_FGT(SYS_APDAKEYLO_EL1, 	HFGRTR, APDAKey, 1),
+	SR_FGT(SYS_APDAKEYHI_EL1, 	HFGRTR, APDAKey, 1),
+	SR_FGT(SYS_AMAIR_EL1, 		HFGRTR, AMAIR_EL1, 1),
+	SR_FGT(SYS_AIDR_EL1, 		HFGRTR, AIDR_EL1, 1),
+	SR_FGT(SYS_AFSR1_EL1, 		HFGRTR, AFSR1_EL1, 1),
+	SR_FGT(SYS_AFSR0_EL1, 		HFGRTR, AFSR0_EL1, 1),
+
+	/* HFGRTR2_EL2, HFGWTR2_EL2 */
+	SR_FGT(SYS_ACTLRALIAS_EL1,	HFGRTR2, nACTLRALIAS_EL1, 0),
+	SR_FGT(SYS_ACTLRMASK_EL1,	HFGRTR2, nACTLRMASK_EL1, 0),
+	SR_FGT(SYS_CPACRALIAS_EL1,	HFGRTR2, nCPACRALIAS_EL1, 0),
+	SR_FGT(SYS_CPACRMASK_EL1,	HFGRTR2, nCPACRMASK_EL1, 0),
+	SR_FGT(SYS_PFAR_EL1,		HFGRTR2, nPFAR_EL1, 0),
+	SR_FGT(SYS_RCWSMASK_EL1,	HFGRTR2, nRCWSMASK_EL1, 0),
+	SR_FGT(SYS_SCTLR2ALIAS_EL1,	HFGRTR2, nSCTLRALIAS2_EL1, 0),
+	SR_FGT(SYS_SCTLR2MASK_EL1,	HFGRTR2, nSCTLR2MASK_EL1, 0),
+	SR_FGT(SYS_SCTLRALIAS_EL1,	HFGRTR2, nSCTLRALIAS_EL1, 0),
+	SR_FGT(SYS_SCTLRMASK_EL1,	HFGRTR2, nSCTLRMASK_EL1, 0),
+	SR_FGT(SYS_TCR2ALIAS_EL1,	HFGRTR2, nTCR2ALIAS_EL1, 0),
+	SR_FGT(SYS_TCR2MASK_EL1,	HFGRTR2, nTCR2MASK_EL1, 0),
+	SR_FGT(SYS_TCRALIAS_EL1,	HFGRTR2, nTCRALIAS_EL1, 0),
+	SR_FGT(SYS_TCRMASK_EL1,		HFGRTR2, nTCRMASK_EL1, 0),
+	SR_FGT(SYS_ERXGSR_EL1,		HFGRTR2, nERXGSR_EL1, 0),
+
 	/* HFGITR_EL2 */
 	SR_FGT(OP_AT_S1E1A, 		HFGITR, ATS1E1A, 1),
 	SR_FGT(OP_COSP_RCTX, 		HFGITR, COSPRCTX, 1),
@@ -1480,6 +1515,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_IC_IVAU, 		HFGITR, ICIVAU, 1),
 	SR_FGT(SYS_IC_IALLU, 		HFGITR, ICIALLU, 1),
 	SR_FGT(SYS_IC_IALLUIS, 		HFGITR, ICIALLUIS, 1),
+
+	/* HFGITR2_EL2 */
+	SR_FGT(SYS_DC_CIGDVAPS,		HFGITR2, nDCCIVAPS, 0),
+	SR_FGT(SYS_DC_CIVAPS,		HFGITR2, nDCCIVAPS, 0),
+
 	/* HDFGRTR_EL2 */
 	SR_FGT(SYS_PMBIDR_EL1, 		HDFGRTR, PMBIDR_EL1, 1),
 	SR_FGT(SYS_PMSNEVFR_EL1, 	HDFGRTR, nPMSNEVFR_EL1, 0),
@@ -1789,68 +1829,12 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_PMCNTENSET_EL0, 	HDFGRTR, PMCNTEN, 1),
 	SR_FGT(SYS_PMCCNTR_EL0, 	HDFGRTR, PMCCNTR_EL0, 1),
 	SR_FGT(SYS_PMCCFILTR_EL0, 	HDFGRTR, PMCCFILTR_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(0), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(1), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(2), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(3), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(4), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(5), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(6), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(7), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(8), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(9), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(10), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(11), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(12), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(13), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(14), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(15), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(16), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(17), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(18), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(19), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(20), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(21), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(22), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(23), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(24), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(25), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(26), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(27), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(28), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(29), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(30), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(0), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(1), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(2), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(3), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(4), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(5), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(6), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(7), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(8), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(9), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(10), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(11), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(12), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(13), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(14), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(15), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(16), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(17), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(18), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(19), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(20), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(21), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(22), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(23), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(24), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(25), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(26), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(27), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(28), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(29), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(30), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT_RANGE(SYS_PMEVTYPERn_EL0(0),
+		     SYS_PMEVTYPERn_EL0(30),
+		     HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT_RANGE(SYS_PMEVCNTRn_EL0(0),
+		     SYS_PMEVCNTRn_EL0(30),
+		     HDFGRTR, PMEVCNTRn_EL0, 1),
 	SR_FGT(SYS_OSDLR_EL1, 		HDFGRTR, OSDLR_EL1, 1),
 	SR_FGT(SYS_OSECCR_EL1, 		HDFGRTR, OSECCR_EL1, 1),
 	SR_FGT(SYS_OSLSR_EL1, 		HDFGRTR, OSLSR_EL1, 1),
@@ -1928,6 +1912,59 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_DBGBCRn_EL1(13), 	HDFGRTR, DBGBCRn_EL1, 1),
 	SR_FGT(SYS_DBGBCRn_EL1(14), 	HDFGRTR, DBGBCRn_EL1, 1),
 	SR_FGT(SYS_DBGBCRn_EL1(15), 	HDFGRTR, DBGBCRn_EL1, 1),
+
+	/* HDFGRTR2_EL2 */
+	SR_FGT(SYS_MDSELR_EL1,		HDFGRTR2, nMDSELR_EL1, 0),
+	SR_FGT(SYS_MDSTEPOP_EL1,	HDFGRTR2, nMDSTEPOP_EL1, 0),
+	SR_FGT(SYS_PMCCNTSVR_EL1,	HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT_RANGE(SYS_PMEVCNTSVRn_EL1(0),
+		     SYS_PMEVCNTSVRn_EL1(30),
+		     HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT(SYS_PMICNTSVR_EL1,	HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT(SYS_PMECR_EL1,		HDFGRTR2, nPMECR_EL1, 0),
+	SR_FGT(SYS_PMIAR_EL1,		HDFGRTR2, nPMIAR_EL1, 0),
+	SR_FGT(SYS_PMICFILTR_EL0,	HDFGRTR2, nPMICFILTR_EL0, 0),
+	SR_FGT(SYS_PMICNTR_EL0,		HDFGRTR2, nPMICNTR_EL0, 0),
+	SR_FGT(SYS_PMSSCR_EL1,		HDFGRTR2, nPMSSCR_EL1, 0),
+	SR_FGT(SYS_PMUACR_EL1,		HDFGRTR2, nPMUACR_EL1, 0),
+	SR_FGT(SYS_SPMACCESSR_EL1,	HDFGRTR2, nSPMACCESSR_EL1, 0),
+	SR_FGT(SYS_SPMCFGR_EL1,		HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMDEVARCH_EL1,	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCGCRn_EL1(0),	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCGCRn_EL1(1),	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMIIDR_EL1,		HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCNTENCLR_EL0,	HDFGRTR2, nSPMCNTEN, 0),
+	SR_FGT(SYS_SPMCNTENSET_EL0,	HDFGRTR2, nSPMCNTEN, 0),
+	SR_FGT(SYS_SPMCR_EL0,		HDFGRTR2, nSPMCR_EL0, 0),
+	SR_FGT(SYS_SPMDEVAFF_EL1,	HDFGRTR2, nSPMDEVAFF_EL1, 0),
+	/*
+	 * We have up to 64 of these registers in ranges of 16, banked via
+	 * SPMSELR_EL0.BANK. We're only concerned with the accessors here,
+	 * not the architectural registers.
+	 */
+	SR_FGT_RANGE(SYS_SPMEVCNTRn_EL0(0),
+		     SYS_SPMEVCNTRn_EL0(15),
+		     HDFGRTR2, nSPMEVCNTRn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVFILT2Rn_EL0(0),
+		     SYS_SPMEVFILT2Rn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVFILTRn_EL0(0),
+		     SYS_SPMEVFILTRn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVTYPERn_EL0(0),
+		     SYS_SPMEVTYPERn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT(SYS_SPMINTENCLR_EL1,	HDFGRTR2, nSPMINTEN, 0),
+	SR_FGT(SYS_SPMINTENSET_EL1,	HDFGRTR2, nSPMINTEN, 0),
+	SR_FGT(SYS_SPMOVSCLR_EL0,	HDFGRTR2, nSPMOVS, 0),
+	SR_FGT(SYS_SPMOVSSET_EL0,	HDFGRTR2, nSPMOVS, 0),
+	SR_FGT(SYS_SPMSCR_EL1,		HDFGRTR2, nSPMSCR_EL1, 0),
+	SR_FGT(SYS_SPMSELR_EL0,		HDFGRTR2, nSPMSELR_EL0, 0),
+	SR_FGT(SYS_TRCITECR_EL1,	HDFGRTR2, nTRCITECR_EL1, 0),
+	SR_FGT(SYS_PMBMAR_EL1,		HDFGRTR2, nPMBMAR_EL1, 0),
+	SR_FGT(SYS_PMSDSFR_EL1,		HDFGRTR2, nPMSDSFR_EL1, 0),
+	SR_FGT(SYS_TRBMPAM_EL1,		HDFGRTR2, nTRBMPAM_EL1, 0),
+
 	/*
 	 * HDFGWTR_EL2
 	 *
@@ -1938,12 +1975,19 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	 * read-side mappings, and only the write-side mappings that
 	 * differ from the read side, and the trap handler will pick
 	 * the correct shadow register based on the access type.
+	 *
+	 * Same model applies to the FEAT_FGT2 registers.
 	 */
 	SR_FGT(SYS_TRFCR_EL1,		HDFGWTR, TRFCR_EL1, 1),
 	SR_FGT(SYS_TRCOSLAR,		HDFGWTR, TRCOSLAR, 1),
 	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
 	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
 	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+
+	/* HDFGWTR2_EL2 */
+	SR_FGT(SYS_PMZR_EL0,		HDFGWTR2, nPMZR_EL0, 0),
+	SR_FGT(SYS_SPMZR_EL0,		HDFGWTR2, nSPMEVCNTRn_EL0, 0),
+
 	/*
 	 * HAFGRTR_EL2
 	 */
@@ -1989,6 +2033,20 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_AMEVCNTR0_EL0(0),	HAFGRTR, AMEVCNTR00_EL0, 1),
 };
 
+/*
+ * Additional FGTs that do not fire with ESR_EL2.EC==0x18. This table
+ * isn't used for exception routing, but only as a promise that the
+ * trap is handled somewhere else.
+ */
+static const union trap_config non_0x18_fgt[] __initconst = {
+	FGT(HFGITR, PSBCSYNC, 1),
+	FGT(HFGITR, nGCSSTR_EL1, 0),
+	FGT(HFGITR, SVC_EL1, 1),
+	FGT(HFGITR, SVC_EL0, 1),
+	FGT(HFGITR, ERET, 1),
+	FGT(HFGITR2, TSBCSYNC, 1),
+};
+
 static union trap_config get_trap_config(u32 sysreg)
 {
 	return (union trap_config) {
@@ -2033,6 +2091,130 @@ static u32 encoding_next(u32 encoding)
 	return sys_reg(op0 + 1, 0, 0, 0, 0);
 }
 
+#define FGT_MASKS(__n, __m)						\
+	struct fgt_masks __n = { .str = #__m, .res0 = __m, }
+
+FGT_MASKS(hfgrtr_masks, HFGRTR_EL2_RES0);
+FGT_MASKS(hfgwtr_masks, HFGWTR_EL2_RES0);
+FGT_MASKS(hfgitr_masks, HFGITR_EL2_RES0);
+FGT_MASKS(hdfgrtr_masks, HDFGRTR_EL2_RES0);
+FGT_MASKS(hdfgwtr_masks, HDFGWTR_EL2_RES0);
+FGT_MASKS(hafgrtr_masks, HAFGRTR_EL2_RES0);
+FGT_MASKS(hfgrtr2_masks, HFGRTR2_EL2_RES0);
+FGT_MASKS(hfgwtr2_masks, HFGWTR2_EL2_RES0);
+FGT_MASKS(hfgitr2_masks, HFGITR2_EL2_RES0);
+FGT_MASKS(hdfgrtr2_masks, HDFGRTR2_EL2_RES0);
+FGT_MASKS(hdfgwtr2_masks, HDFGWTR2_EL2_RES0);
+
+static __init bool aggregate_fgt(union trap_config tc)
+{
+	struct fgt_masks *rmasks, *wmasks;
+
+	switch (tc.fgt) {
+	case HFGRTR_GROUP:
+		rmasks = &hfgrtr_masks;
+		wmasks = &hfgwtr_masks;
+		break;
+	case HDFGRTR_GROUP:
+		rmasks = &hdfgrtr_masks;
+		wmasks = &hdfgwtr_masks;
+		break;
+	case HAFGRTR_GROUP:
+		rmasks = &hafgrtr_masks;
+		wmasks = NULL;
+		break;
+	case HFGITR_GROUP:
+		rmasks = &hfgitr_masks;
+		wmasks = NULL;
+		break;
+	case HFGRTR2_GROUP:
+		rmasks = &hfgrtr2_masks;
+		wmasks = &hfgwtr2_masks;
+		break;
+	case HDFGRTR2_GROUP:
+		rmasks = &hdfgrtr2_masks;
+		wmasks = &hdfgwtr2_masks;
+		break;
+	case HFGITR2_GROUP:
+		rmasks = &hfgitr2_masks;
+		wmasks = NULL;
+		break;
+	}
+
+	/*
+	 * A bit can be reserved in either the R or W register, but
+	 * not both.
+	 */
+	if ((BIT(tc.bit) & rmasks->res0) &&
+	    (!wmasks || (BIT(tc.bit) & wmasks->res0)))
+		return false;
+
+	if (tc.pol)
+		rmasks->mask |= BIT(tc.bit) & ~rmasks->res0;
+	else
+		rmasks->nmask |= BIT(tc.bit) & ~rmasks->res0;
+
+	if (wmasks) {
+		if (tc.pol)
+			wmasks->mask |= BIT(tc.bit) & ~wmasks->res0;
+		else
+			wmasks->nmask |= BIT(tc.bit) & ~wmasks->res0;
+	}
+
+	return true;
+}
+
+static __init int check_fgt_masks(struct fgt_masks *masks)
+{
+	unsigned long duplicate = masks->mask & masks->nmask;
+	u64 res0 = masks->res0;
+	int ret = 0;
+
+	if (duplicate) {
+		int i;
+
+		for_each_set_bit(i, &duplicate, 64) {
+			kvm_err("%s[%d] bit has both polarities\n",
+				masks->str, i);
+		}
+
+		ret = -EINVAL;
+	}
+
+	masks->res0 = ~(masks->mask | masks->nmask);
+	if (masks->res0 != res0)
+		kvm_info("Implicit %s = %016llx, expecting %016llx\n",
+			 masks->str, masks->res0, res0);
+
+	return ret;
+}
+
+static __init int check_all_fgt_masks(int ret)
+{
+	static struct fgt_masks * const masks[] __initconst = {
+		&hfgrtr_masks,
+		&hfgwtr_masks,
+		&hfgitr_masks,
+		&hdfgrtr_masks,
+		&hdfgwtr_masks,
+		&hafgrtr_masks,
+		&hfgrtr2_masks,
+		&hfgwtr2_masks,
+		&hfgitr2_masks,
+		&hdfgrtr2_masks,
+		&hdfgwtr2_masks,
+	};
+	int err = 0;
+
+	for (int i = 0; i < ARRAY_SIZE(masks); i++)
+		err |= check_fgt_masks(masks[i]);
+
+	return ret ?: err;
+}
+
+#define for_each_encoding_in(__x, __s, __e)	\
+	for (u32 __x = __s; __x <= __e; __x = encoding_next(__x))
+
 int __init populate_nv_trap_config(void)
 {
 	int ret = 0;
@@ -2041,6 +2223,7 @@ int __init populate_nv_trap_config(void)
 	BUILD_BUG_ON(__NR_CGT_GROUP_IDS__ > BIT(TC_CGT_BITS));
 	BUILD_BUG_ON(__NR_FGT_GROUP_IDS__ > BIT(TC_FGT_BITS));
 	BUILD_BUG_ON(__NR_FG_FILTER_IDS__ > BIT(TC_FGF_BITS));
+	BUILD_BUG_ON(__HCRX_EL2_MASK & __HCRX_EL2_nMASK);
 
 	for (int i = 0; i < ARRAY_SIZE(encoding_to_cgt); i++) {
 		const struct encoding_to_trap_config *cgt = &encoding_to_cgt[i];
@@ -2051,7 +2234,7 @@ int __init populate_nv_trap_config(void)
 			ret = -EINVAL;
 		}
 
-		for (u32 enc = cgt->encoding; enc <= cgt->end; enc = encoding_next(enc)) {
+		for_each_encoding_in(enc, cgt->encoding, cgt->end) {
 			prev = xa_store(&sr_forward_xa, enc,
 					xa_mk_value(cgt->tc.val), GFP_KERNEL);
 			if (prev && !xa_is_err(prev)) {
@@ -2066,6 +2249,10 @@ int __init populate_nv_trap_config(void)
 		}
 	}
 
+	if (__HCRX_EL2_RES0 != HCRX_EL2_RES0)
+		kvm_info("Sanitised HCR_EL2_RES0 = %016llx, expecting %016llx\n",
+			 __HCRX_EL2_RES0, HCRX_EL2_RES0);
+
 	kvm_info("nv: %ld coarse grained trap handlers\n",
 		 ARRAY_SIZE(encoding_to_cgt));
 
@@ -2082,23 +2269,39 @@ int __init populate_nv_trap_config(void)
 			print_nv_trap_error(fgt, "Invalid FGT", ret);
 		}
 
-		tc = get_trap_config(fgt->encoding);
+		for_each_encoding_in(enc, fgt->encoding, fgt->end) {
+			tc = get_trap_config(enc);
 
-		if (tc.fgt) {
-			ret = -EINVAL;
-			print_nv_trap_error(fgt, "Duplicate FGT", ret);
-		}
+			if (tc.fgt) {
+				ret = -EINVAL;
+				print_nv_trap_error(fgt, "Duplicate FGT", ret);
+			}
+
+			tc.val |= fgt->tc.val;
+			prev = xa_store(&sr_forward_xa, enc,
+					xa_mk_value(tc.val), GFP_KERNEL);
+
+			if (xa_is_err(prev)) {
+				ret = xa_err(prev);
+				print_nv_trap_error(fgt, "Failed FGT insertion", ret);
+			}
 
-		tc.val |= fgt->tc.val;
-		prev = xa_store(&sr_forward_xa, fgt->encoding,
-				xa_mk_value(tc.val), GFP_KERNEL);
+			if (!aggregate_fgt(tc)) {
+				ret = -EINVAL;
+				print_nv_trap_error(fgt, "FGT bit is reserved", ret);
+			}
+		}
+	}
 
-		if (xa_is_err(prev)) {
-			ret = xa_err(prev);
-			print_nv_trap_error(fgt, "Failed FGT insertion", ret);
+	for (int i = 0; i < ARRAY_SIZE(non_0x18_fgt); i++) {
+		if (!aggregate_fgt(non_0x18_fgt[i])) {
+			ret = -EINVAL;
+			kvm_err("non_0x18_fgt[%d] is reserved\n", i);
 		}
 	}
 
+	ret = check_all_fgt_masks(ret);
+
 	kvm_info("nv: %ld fine grained trap handlers\n",
 		 ARRAY_SIZE(encoding_to_fgt));
 
@@ -2215,11 +2418,11 @@ static u64 kvm_get_sysreg_res0(struct kvm *kvm, enum vcpu_sysreg sr)
 	return masks->mask[sr - __VNCR_START__].res0;
 }
 
-static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
-			  u64 val, const union trap_config tc)
+static bool check_fgt_bit(struct kvm_vcpu *vcpu, enum vcpu_sysreg sr,
+			  const union trap_config tc)
 {
 	struct kvm *kvm = vcpu->kvm;
-	enum vcpu_sysreg sr;
+	u64 val;
 
 	/*
 	 * KVM doesn't know about any FGTs that apply to the host, and hopefully
@@ -2228,6 +2431,8 @@ static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
 	if (is_hyp_ctxt(vcpu))
 		return false;
 
+	val = __vcpu_sys_reg(vcpu, sr);
+
 	if (tc.pol)
 		return (val & BIT(tc.bit));
 
@@ -2242,38 +2447,17 @@ static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
 	if (val & BIT(tc.bit))
 		return false;
 
-	switch ((enum fgt_group_id)tc.fgt) {
-	case HFGxTR_GROUP:
-		sr = is_read ? HFGRTR_EL2 : HFGWTR_EL2;
-		break;
-
-	case HDFGRTR_GROUP:
-		sr = is_read ? HDFGRTR_EL2 : HDFGWTR_EL2;
-		break;
-
-	case HAFGRTR_GROUP:
-		sr = HAFGRTR_EL2;
-		break;
-
-	case HFGITR_GROUP:
-		sr = HFGITR_EL2;
-		break;
-
-	default:
-		WARN_ONCE(1, "Unhandled FGT group");
-		return false;
-	}
-
 	return !(kvm_get_sysreg_res0(kvm, sr) & BIT(tc.bit));
 }
 
 bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 {
+	enum vcpu_sysreg fgtreg;
 	union trap_config tc;
 	enum trap_behaviour b;
 	bool is_read;
 	u32 sysreg;
-	u64 esr, val;
+	u64 esr;
 
 	esr = kvm_vcpu_get_esr(vcpu);
 	sysreg = esr_sys64_to_sysreg(esr);
@@ -2319,26 +2503,20 @@ bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 	case __NO_FGT_GROUP__:
 		break;
 
-	case HFGxTR_GROUP:
-		if (is_read)
-			val = __vcpu_sys_reg(vcpu, HFGRTR_EL2);
-		else
-			val = __vcpu_sys_reg(vcpu, HFGWTR_EL2);
+	case HFGRTR_GROUP:
+		fgtreg = is_read ? HFGRTR_EL2 : HFGWTR_EL2;
 		break;
 
 	case HDFGRTR_GROUP:
-		if (is_read)
-			val = __vcpu_sys_reg(vcpu, HDFGRTR_EL2);
-		else
-			val = __vcpu_sys_reg(vcpu, HDFGWTR_EL2);
+		fgtreg = is_read ? HDFGRTR_EL2 : HDFGWTR_EL2;
 		break;
 
 	case HAFGRTR_GROUP:
-		val = __vcpu_sys_reg(vcpu, HAFGRTR_EL2);
+		fgtreg = HAFGRTR_EL2;
 		break;
 
 	case HFGITR_GROUP:
-		val = __vcpu_sys_reg(vcpu, HFGITR_EL2);
+		fgtreg = HFGITR_EL2;
 		switch (tc.fgf) {
 			u64 tmp;
 
@@ -2352,13 +2530,26 @@ bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 		}
 		break;
 
-	case __NR_FGT_GROUP_IDS__:
+	case HFGRTR2_GROUP:
+		fgtreg = is_read ? HFGRTR2_EL2 : HFGWTR2_EL2;
+		break;
+
+	case HDFGRTR2_GROUP:
+		fgtreg = is_read ? HDFGRTR2_EL2 : HDFGWTR2_EL2;
+		break;
+
+	case HFGITR2_GROUP:
+		fgtreg = HFGITR2_EL2;
+		break;
+
+	default:
 		/* Something is really wrong, bail out */
-		WARN_ONCE(1, "__NR_FGT_GROUP_IDS__");
+		WARN_ONCE(1, "Bad FGT group (encoding %08x, config %016llx)\n",
+			  sysreg, tc.val);
 		goto local;
 	}
 
-	if (tc.fgt != __NO_FGT_GROUP__ && check_fgt_bit(vcpu, is_read, val, tc))
+	if (tc.fgt != __NO_FGT_GROUP__ && check_fgt_bit(vcpu, fgtreg, tc))
 		goto inject;
 
 	b = compute_trap_behaviour(vcpu, tc);
@@ -2471,13 +2662,6 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
 {
 	u64 spsr, elr, esr;
 
-	/*
-	 * Forward this trap to the virtual EL2 if the virtual
-	 * HCR_EL2.NV bit is set and this is coming from !EL2.
-	 */
-	if (forward_hcr_traps(vcpu, HCR_NV))
-		return;
-
 	spsr = vcpu_read_sys_reg(vcpu, SPSR_EL2);
 	spsr = kvm_check_illegal_exception_return(vcpu, spsr);
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/fpsimd.c linux-libre-6.16-gnu/arch/arm64/kvm/fpsimd.c
index 7f6e43d25691..15e17aca1dec 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/fpsimd.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/fpsimd.c
@@ -14,32 +14,6 @@
 #include <asm/kvm_mmu.h>
 #include <asm/sysreg.h>
 
-/*
- * Called on entry to KVM_RUN unless this vcpu previously ran at least
- * once and the most recent prior KVM_RUN for this vcpu was called from
- * the same task as current (highly likely).
- *
- * This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu),
- * such that on entering hyp the relevant parts of current are already
- * mapped.
- */
-int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
-{
-	struct user_fpsimd_state *fpsimd = &current->thread.uw.fpsimd_state;
-	int ret;
-
-	/* pKVM has its own tracking of the host fpsimd state. */
-	if (is_protected_kvm_enabled())
-		return 0;
-
-	/* Make sure the host task fpsimd state is visible to hyp: */
-	ret = kvm_share_hyp(fpsimd, fpsimd + 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 /*
  * Prepare vcpu for saving the host's FPSIMD state and loading the guest's.
  * The actual loading is done by the FPSIMD access trap taken to hyp.
@@ -103,8 +77,8 @@ void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
 		fp_state.sve_state = vcpu->arch.sve_state;
 		fp_state.sve_vl = vcpu->arch.sve_max_vl;
 		fp_state.sme_state = NULL;
-		fp_state.svcr = &__vcpu_sys_reg(vcpu, SVCR);
-		fp_state.fpmr = &__vcpu_sys_reg(vcpu, FPMR);
+		fp_state.svcr = __ctxt_sys_reg(&vcpu->arch.ctxt, SVCR);
+		fp_state.fpmr = __ctxt_sys_reg(&vcpu->arch.ctxt, FPMR);
 		fp_state.fp_type = &vcpu->arch.fp_type;
 
 		if (vcpu_has_sve(vcpu))
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/handle_exit.c linux-libre-6.16-gnu/arch/arm64/kvm/handle_exit.c
index b73dc26bc44b..453266c96481 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/handle_exit.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/handle_exit.c
@@ -10,6 +10,7 @@
 
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
+#include <linux/ubsan.h>
 
 #include <asm/esr.h>
 #include <asm/exception.h>
@@ -298,6 +299,81 @@ static int handle_svc(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+static int kvm_handle_gcs(struct kvm_vcpu *vcpu)
+{
+	/* We don't expect GCS, so treat it with contempt */
+	if (kvm_has_feat(vcpu->kvm, ID_AA64PFR1_EL1, GCS, IMP))
+		WARN_ON_ONCE(1);
+
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+static int handle_other(struct kvm_vcpu *vcpu)
+{
+	bool is_l2 = vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu);
+	u64 hcrx = __vcpu_sys_reg(vcpu, HCRX_EL2);
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	u64 iss = ESR_ELx_ISS(esr);
+	struct kvm *kvm = vcpu->kvm;
+	bool allowed, fwd = false;
+
+	/*
+	 * We only trap for two reasons:
+	 *
+	 * - the feature is disabled, and the only outcome is to
+	 *   generate an UNDEF.
+	 *
+	 * - the feature is enabled, but a NV guest wants to trap the
+	 *   feature used by its L2 guest. We forward the exception in
+	 *   this case.
+	 *
+	 * What we don't expect is to end-up here if the guest is
+	 * expected be be able to directly use the feature, hence the
+	 * WARN_ON below.
+	 */
+	switch (iss) {
+	case ESR_ELx_ISS_OTHER_ST64BV:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_V);
+		if (is_l2)
+			fwd = !(hcrx & HCRX_EL2_EnASR);
+		break;
+	case ESR_ELx_ISS_OTHER_ST64BV0:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA);
+		if (is_l2)
+			fwd = !(hcrx & HCRX_EL2_EnAS0);
+		break;
+	case ESR_ELx_ISS_OTHER_LDST64B:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64);
+		if (is_l2)
+			fwd = !(hcrx & HCRX_EL2_EnALS);
+		break;
+	case ESR_ELx_ISS_OTHER_TSBCSYNC:
+		allowed = kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceBuffer, TRBE_V1P1);
+		if (is_l2)
+			fwd = (__vcpu_sys_reg(vcpu, HFGITR2_EL2) & HFGITR2_EL2_TSBCSYNC);
+		break;
+	case ESR_ELx_ISS_OTHER_PSBCSYNC:
+		allowed = kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, V1P5);
+		if (is_l2)
+			fwd = (__vcpu_sys_reg(vcpu, HFGITR_EL2) & HFGITR_EL2_PSBCSYNC);
+		break;
+	default:
+		/* Clearly, we're missing something. */
+		WARN_ON_ONCE(1);
+		allowed = false;
+	}
+
+	WARN_ON_ONCE(allowed && !fwd);
+
+	if (allowed && fwd)
+		kvm_inject_nested_sync(vcpu, esr);
+	else
+		kvm_inject_undefined(vcpu);
+
+	return 1;
+}
+
 static exit_handle_fn arm_exit_handlers[] = {
 	[0 ... ESR_ELx_EC_MAX]	= kvm_handle_unknown_ec,
 	[ESR_ELx_EC_WFx]	= kvm_handle_wfx,
@@ -307,6 +383,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_CP14_LS]	= kvm_handle_cp14_load_store,
 	[ESR_ELx_EC_CP10_ID]	= kvm_handle_cp10_id,
 	[ESR_ELx_EC_CP14_64]	= kvm_handle_cp14_64,
+	[ESR_ELx_EC_OTHER]	= handle_other,
 	[ESR_ELx_EC_HVC32]	= handle_hvc,
 	[ESR_ELx_EC_SMC32]	= handle_smc,
 	[ESR_ELx_EC_HVC64]	= handle_hvc,
@@ -317,6 +394,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_ERET]	= kvm_handle_eret,
 	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
 	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_DABT_CUR]	= kvm_handle_vncr_abort,
 	[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
 	[ESR_ELx_EC_WATCHPT_LOW]= kvm_handle_guest_debug,
 	[ESR_ELx_EC_BREAKPT_LOW]= kvm_handle_guest_debug,
@@ -324,6 +402,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
 	[ESR_ELx_EC_FP_ASIMD]	= kvm_handle_fpasimd,
 	[ESR_ELx_EC_PAC]	= kvm_handle_ptrauth,
+	[ESR_ELx_EC_GCS]	= kvm_handle_gcs,
 };
 
 static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
@@ -474,6 +553,11 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
 			print_nvhe_hyp_panic("BUG", panic_addr);
 	} else if (IS_ENABLED(CONFIG_CFI_CLANG) && esr_is_cfi_brk(esr)) {
 		kvm_nvhe_report_cfi_failure(panic_addr);
+	} else if (IS_ENABLED(CONFIG_UBSAN_KVM_EL2) &&
+		   ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
+		   esr_is_ubsan_brk(esr)) {
+		print_nvhe_hyp_panic(report_ubsan_failure(esr & UBSAN_BRK_MASK),
+				     panic_addr);
 	} else {
 		print_nvhe_hyp_panic("panic", panic_addr);
 	}
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/exception.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/exception.c
index 424a5107cddb..6a2a899a344e 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/exception.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/exception.c
@@ -37,7 +37,7 @@ static inline void __vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 	if (unlikely(vcpu_has_nv(vcpu)))
 		vcpu_write_sys_reg(vcpu, val, reg);
 	else if (!__vcpu_write_sys_reg_to_cpu(val, reg))
-		__vcpu_sys_reg(vcpu, reg) = val;
+		__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
 static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
@@ -51,7 +51,7 @@ static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
 	} else if (has_vhe()) {
 		write_sysreg_el1(val, SYS_SPSR);
 	} else {
-		__vcpu_sys_reg(vcpu, SPSR_EL1) = val;
+		__vcpu_assign_sys_reg(vcpu, SPSR_EL1, val);
 	}
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
index 96f625dc7256..2ad57b117385 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -45,7 +45,7 @@ static inline void __fpsimd_save_fpexc32(struct kvm_vcpu *vcpu)
 	if (!vcpu_el1_is_32bit(vcpu))
 		return;
 
-	__vcpu_sys_reg(vcpu, FPEXC32_EL2) = read_sysreg(fpexc32_el2);
+	__vcpu_assign_sys_reg(vcpu, FPEXC32_EL2, read_sysreg(fpexc32_el2));
 }
 
 static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
@@ -65,12 +65,186 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 	}
 }
 
+static inline void __activate_cptr_traps_nvhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPTR_NVHE_EL2_RES1 | CPTR_EL2_TAM | CPTR_EL2_TTA;
+
+	/*
+	 * Always trap SME since it's not supported in KVM.
+	 * TSM is RES1 if SME isn't implemented.
+	 */
+	val |= CPTR_EL2_TSM;
+
+	if (!vcpu_has_sve(vcpu) || !guest_owns_fp_regs())
+		val |= CPTR_EL2_TZ;
+
+	if (!guest_owns_fp_regs())
+		val |= CPTR_EL2_TFP;
+
+	write_sysreg(val, cptr_el2);
+}
+
+static inline void __activate_cptr_traps_vhe(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
+	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
+	 * except for some missing controls, such as TAM.
+	 * In this case, CPTR_EL2.TAM has the same position with or without
+	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
+	 * shift value for trapping the AMU accesses.
+	 */
+	u64 val = CPTR_EL2_TAM | CPACR_EL1_TTA;
+	u64 cptr;
+
+	if (guest_owns_fp_regs()) {
+		val |= CPACR_EL1_FPEN;
+		if (vcpu_has_sve(vcpu))
+			val |= CPACR_EL1_ZEN;
+	}
+
+	if (!vcpu_has_nv(vcpu))
+		goto write;
+
+	/*
+	 * The architecture is a bit crap (what a surprise): an EL2 guest
+	 * writing to CPTR_EL2 via CPACR_EL1 can't set any of TCPAC or TTA,
+	 * as they are RES0 in the guest's view. To work around it, trap the
+	 * sucker using the very same bit it can't set...
+	 */
+	if (vcpu_el2_e2h_is_set(vcpu) && is_hyp_ctxt(vcpu))
+		val |= CPTR_EL2_TCPAC;
+
+	/*
+	 * Layer the guest hypervisor's trap configuration on top of our own if
+	 * we're in a nested context.
+	 */
+	if (is_hyp_ctxt(vcpu))
+		goto write;
+
+	cptr = vcpu_sanitised_cptr_el2(vcpu);
+
+	/*
+	 * Pay attention, there's some interesting detail here.
+	 *
+	 * The CPTR_EL2.xEN fields are 2 bits wide, although there are only two
+	 * meaningful trap states when HCR_EL2.TGE = 0 (running a nested guest):
+	 *
+	 *  - CPTR_EL2.xEN = x0, traps are enabled
+	 *  - CPTR_EL2.xEN = x1, traps are disabled
+	 *
+	 * In other words, bit[0] determines if guest accesses trap or not. In
+	 * the interest of simplicity, clear the entire field if the guest
+	 * hypervisor has traps enabled to dispel any illusion of something more
+	 * complicated taking place.
+	 */
+	if (!(SYS_FIELD_GET(CPACR_EL1, FPEN, cptr) & BIT(0)))
+		val &= ~CPACR_EL1_FPEN;
+	if (!(SYS_FIELD_GET(CPACR_EL1, ZEN, cptr) & BIT(0)))
+		val &= ~CPACR_EL1_ZEN;
+
+	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
+		val |= cptr & CPACR_EL1_E0POE;
+
+	val |= cptr & CPTR_EL2_TCPAC;
+
+write:
+	write_sysreg(val, cpacr_el1);
+}
+
+static inline void __activate_cptr_traps(struct kvm_vcpu *vcpu)
+{
+	if (!guest_owns_fp_regs())
+		__activate_traps_fpsimd32(vcpu);
+
+	if (has_vhe() || has_hvhe())
+		__activate_cptr_traps_vhe(vcpu);
+	else
+		__activate_cptr_traps_nvhe(vcpu);
+}
+
+static inline void __deactivate_cptr_traps_nvhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPTR_NVHE_EL2_RES1;
+
+	if (!cpus_have_final_cap(ARM64_SVE))
+		val |= CPTR_EL2_TZ;
+	if (!cpus_have_final_cap(ARM64_SME))
+		val |= CPTR_EL2_TSM;
+
+	write_sysreg(val, cptr_el2);
+}
+
+static inline void __deactivate_cptr_traps_vhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPACR_EL1_FPEN;
+
+	if (cpus_have_final_cap(ARM64_SVE))
+		val |= CPACR_EL1_ZEN;
+	if (cpus_have_final_cap(ARM64_SME))
+		val |= CPACR_EL1_SMEN;
+
+	write_sysreg(val, cpacr_el1);
+}
+
+static inline void __deactivate_cptr_traps(struct kvm_vcpu *vcpu)
+{
+	if (has_vhe() || has_hvhe())
+		__deactivate_cptr_traps_vhe(vcpu);
+	else
+		__deactivate_cptr_traps_nvhe(vcpu);
+}
+
+#define reg_to_fgt_masks(reg)						\
+	({								\
+		struct fgt_masks *m;					\
+		switch(reg) {						\
+		case HFGRTR_EL2:					\
+			m = &hfgrtr_masks;				\
+			break;						\
+		case HFGWTR_EL2:					\
+			m = &hfgwtr_masks;				\
+			break;						\
+		case HFGITR_EL2:					\
+			m = &hfgitr_masks;				\
+			break;						\
+		case HDFGRTR_EL2:					\
+			m = &hdfgrtr_masks;				\
+			break;						\
+		case HDFGWTR_EL2:					\
+			m = &hdfgwtr_masks;				\
+			break;						\
+		case HAFGRTR_EL2:					\
+			m = &hafgrtr_masks;				\
+			break;						\
+		case HFGRTR2_EL2:					\
+			m = &hfgrtr2_masks;				\
+			break;						\
+		case HFGWTR2_EL2:					\
+			m = &hfgwtr2_masks;				\
+			break;						\
+		case HFGITR2_EL2:					\
+			m = &hfgitr2_masks;				\
+			break;						\
+		case HDFGRTR2_EL2:					\
+			m = &hdfgrtr2_masks;				\
+			break;						\
+		case HDFGWTR2_EL2:					\
+			m = &hdfgwtr2_masks;				\
+			break;						\
+		default:						\
+			BUILD_BUG_ON(1);				\
+		}							\
+									\
+		m;							\
+	})
+
 #define compute_clr_set(vcpu, reg, clr, set)				\
 	do {								\
-		u64 hfg;						\
-		hfg = __vcpu_sys_reg(vcpu, reg) & ~__ ## reg ## _RES0;	\
-		set |= hfg & __ ## reg ## _MASK; 			\
-		clr |= ~hfg & __ ## reg ## _nMASK; 			\
+		u64 hfg = __vcpu_sys_reg(vcpu, reg);			\
+		struct fgt_masks *m = reg_to_fgt_masks(reg);		\
+		set |= hfg & m->mask;					\
+		clr |= ~hfg & m->nmask;					\
 	} while(0)
 
 #define reg_to_fgt_group_id(reg)					\
@@ -79,7 +253,7 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 		switch(reg) {						\
 		case HFGRTR_EL2:					\
 		case HFGWTR_EL2:					\
-			id = HFGxTR_GROUP;				\
+			id = HFGRTR_GROUP;				\
 			break;						\
 		case HFGITR_EL2:					\
 			id = HFGITR_GROUP;				\
@@ -91,6 +265,17 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 		case HAFGRTR_EL2:					\
 			id = HAFGRTR_GROUP;				\
 			break;						\
+		case HFGRTR2_EL2:					\
+		case HFGWTR2_EL2:					\
+			id = HFGRTR2_GROUP;				\
+			break;						\
+		case HFGITR2_EL2:					\
+			id = HFGITR2_GROUP;				\
+			break;						\
+		case HDFGRTR2_EL2:					\
+		case HDFGWTR2_EL2:					\
+			id = HDFGRTR2_GROUP;				\
+			break;						\
 		default:						\
 			BUILD_BUG_ON(1);				\
 		}							\
@@ -101,13 +286,16 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 #define compute_undef_clr_set(vcpu, kvm, reg, clr, set)			\
 	do {								\
 		u64 hfg = kvm->arch.fgu[reg_to_fgt_group_id(reg)];	\
-		set |= hfg & __ ## reg ## _MASK;			\
-		clr |= hfg & __ ## reg ## _nMASK; 			\
+		struct fgt_masks *m = reg_to_fgt_masks(reg);		\
+		set |= hfg & m->mask;					\
+		clr |= hfg & m->nmask;					\
 	} while(0)
 
 #define update_fgt_traps_cs(hctxt, vcpu, kvm, reg, clr, set)		\
 	do {								\
-		u64 c = 0, s = 0;					\
+		struct fgt_masks *m = reg_to_fgt_masks(reg);		\
+		u64 c = clr, s = set;					\
+		u64 val;						\
 									\
 		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
 		if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu))		\
@@ -115,30 +303,15 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 									\
 		compute_undef_clr_set(vcpu, kvm, reg, c, s);		\
 									\
-		s |= set;						\
-		c |= clr;						\
-		if (c || s) {						\
-			u64 val = __ ## reg ## _nMASK;			\
-			val |= s;					\
-			val &= ~c;					\
-			write_sysreg_s(val, SYS_ ## reg);		\
-		}							\
+		val = m->nmask;						\
+		val |= s;						\
+		val &= ~c;						\
+		write_sysreg_s(val, SYS_ ## reg);			\
 	} while(0)
 
 #define update_fgt_traps(hctxt, vcpu, kvm, reg)		\
 	update_fgt_traps_cs(hctxt, vcpu, kvm, reg, 0, 0)
 
-/*
- * Validate the fine grain trap masks.
- * Check that the masks do not overlap and that all bits are accounted for.
- */
-#define CHECK_FGT_MASKS(reg)							\
-	do {									\
-		BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK));	\
-		BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^	\
-			       (__ ## reg ## _nMASK)));				\
-	} while(0)
-
 static inline bool cpu_has_amu(void)
 {
        u64 pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
@@ -152,56 +325,60 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
 	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
 
-	CHECK_FGT_MASKS(HFGRTR_EL2);
-	CHECK_FGT_MASKS(HFGWTR_EL2);
-	CHECK_FGT_MASKS(HFGITR_EL2);
-	CHECK_FGT_MASKS(HDFGRTR_EL2);
-	CHECK_FGT_MASKS(HDFGWTR_EL2);
-	CHECK_FGT_MASKS(HAFGRTR_EL2);
-	CHECK_FGT_MASKS(HCRX_EL2);
-
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
 	update_fgt_traps(hctxt, vcpu, kvm, HFGRTR_EL2);
 	update_fgt_traps_cs(hctxt, vcpu, kvm, HFGWTR_EL2, 0,
 			    cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38) ?
-			    HFGxTR_EL2_TCR_EL1_MASK : 0);
+			    HFGWTR_EL2_TCR_EL1_MASK : 0);
 	update_fgt_traps(hctxt, vcpu, kvm, HFGITR_EL2);
 	update_fgt_traps(hctxt, vcpu, kvm, HDFGRTR_EL2);
 	update_fgt_traps(hctxt, vcpu, kvm, HDFGWTR_EL2);
 
 	if (cpu_has_amu())
 		update_fgt_traps(hctxt, vcpu, kvm, HAFGRTR_EL2);
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT2))
+	    return;
+
+	update_fgt_traps(hctxt, vcpu, kvm, HFGRTR2_EL2);
+	update_fgt_traps(hctxt, vcpu, kvm, HFGWTR2_EL2);
+	update_fgt_traps(hctxt, vcpu, kvm, HFGITR2_EL2);
+	update_fgt_traps(hctxt, vcpu, kvm, HDFGRTR2_EL2);
+	update_fgt_traps(hctxt, vcpu, kvm, HDFGWTR2_EL2);
 }
 
-#define __deactivate_fgt(htcxt, vcpu, kvm, reg)				\
+#define __deactivate_fgt(htcxt, vcpu, reg)				\
 	do {								\
-		if ((vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) ||	\
-		    kvm->arch.fgu[reg_to_fgt_group_id(reg)])		\
-			write_sysreg_s(ctxt_sys_reg(hctxt, reg),	\
-				       SYS_ ## reg);			\
+		write_sysreg_s(ctxt_sys_reg(hctxt, reg),		\
+			       SYS_ ## reg);				\
 	} while(0)
 
 static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
-	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
 
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
-	__deactivate_fgt(hctxt, vcpu, kvm, HFGRTR_EL2);
-	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
-		write_sysreg_s(ctxt_sys_reg(hctxt, HFGWTR_EL2), SYS_HFGWTR_EL2);
-	else
-		__deactivate_fgt(hctxt, vcpu, kvm, HFGWTR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HFGITR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HDFGRTR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HDFGWTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGRTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGWTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGITR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGRTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGWTR_EL2);
 
 	if (cpu_has_amu())
-		__deactivate_fgt(hctxt, vcpu, kvm, HAFGRTR_EL2);
+		__deactivate_fgt(hctxt, vcpu, HAFGRTR_EL2);
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT2))
+	    return;
+
+	__deactivate_fgt(hctxt, vcpu, HFGRTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGWTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGITR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGRTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGWTR2_EL2);
 }
 
 static inline void  __activate_traps_mpam(struct kvm_vcpu *vcpu)
@@ -260,12 +437,9 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
 		u64 hcrx = vcpu->arch.hcrx_el2;
 		if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
-			u64 clr = 0, set = 0;
-
-			compute_clr_set(vcpu, HCRX_EL2, clr, set);
-
-			hcrx |= set;
-			hcrx &= ~clr;
+			u64 val = __vcpu_sys_reg(vcpu, HCRX_EL2);
+			hcrx |= val & __HCRX_EL2_MASK;
+			hcrx &= ~(~val & __HCRX_EL2_nMASK);
 		}
 
 		ctxt_sys_reg(hctxt, HCRX_EL2) = read_sysreg_s(SYS_HCRX_EL2);
@@ -300,7 +474,7 @@ static inline void ___activate_traps(struct kvm_vcpu *vcpu, u64 hcr)
 	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM))
 		hcr |= HCR_TVM;
 
-	write_sysreg(hcr, hcr_el2);
+	write_sysreg_hcr(hcr);
 
 	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
 		write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2);
@@ -412,7 +586,7 @@ static inline void fpsimd_lazy_switch_to_host(struct kvm_vcpu *vcpu)
 	 */
 	if (vcpu_has_sve(vcpu)) {
 		zcr_el1 = read_sysreg_el1(SYS_ZCR);
-		__vcpu_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu)) = zcr_el1;
+		__vcpu_assign_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu), zcr_el1);
 
 		/*
 		 * The guest's state is always saved using the guest's max VL.
@@ -442,11 +616,6 @@ static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu)
 	 */
 	if (system_supports_sve()) {
 		__hyp_sve_save_host();
-
-		/* Re-enable SVE traps if not supported for the guest vcpu. */
-		if (!vcpu_has_sve(vcpu))
-			cpacr_clear_set(CPACR_EL1_ZEN, 0);
-
 	} else {
 		__fpsimd_save_state(host_data_ptr(host_ctxt.fp_regs));
 	}
@@ -497,10 +666,7 @@ static inline bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 	/* Valid trap.  Switch the context: */
 
 	/* First disable enough traps to allow us to update the registers */
-	if (sve_guest || (is_protected_kvm_enabled() && system_supports_sve()))
-		cpacr_clear_set(0, CPACR_EL1_FPEN | CPACR_EL1_ZEN);
-	else
-		cpacr_clear_set(0, CPACR_EL1_FPEN);
+	__deactivate_cptr_traps(vcpu);
 	isb();
 
 	/* Write out the host state if it's in the registers */
@@ -522,6 +688,13 @@ static inline bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 
 	*host_data_ptr(fp_owner) = FP_STATE_GUEST_OWNED;
 
+	/*
+	 * Re-enable traps necessary for the current state of the guest, e.g.
+	 * those enabled by a guest hypervisor. The ERET to the guest will
+	 * provide the necessary context synchronization.
+	 */
+	__activate_cptr_traps(vcpu);
+
 	return true;
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
index b9cff893bbe0..4d0dbea4c56f 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
@@ -307,11 +307,11 @@ static inline void __sysreg32_save_state(struct kvm_vcpu *vcpu)
 	vcpu->arch.ctxt.spsr_irq = read_sysreg(spsr_irq);
 	vcpu->arch.ctxt.spsr_fiq = read_sysreg(spsr_fiq);
 
-	__vcpu_sys_reg(vcpu, DACR32_EL2) = read_sysreg(dacr32_el2);
-	__vcpu_sys_reg(vcpu, IFSR32_EL2) = read_sysreg(ifsr32_el2);
+	__vcpu_assign_sys_reg(vcpu, DACR32_EL2, read_sysreg(dacr32_el2));
+	__vcpu_assign_sys_reg(vcpu, IFSR32_EL2, read_sysreg(ifsr32_el2));
 
 	if (has_vhe() || kvm_debug_regs_in_use(vcpu))
-		__vcpu_sys_reg(vcpu, DBGVCR32_EL2) = read_sysreg(dbgvcr32_el2);
+		__vcpu_assign_sys_reg(vcpu, DBGVCR32_EL2, read_sysreg(dbgvcr32_el2));
 }
 
 static inline void __sysreg32_restore_state(struct kvm_vcpu *vcpu)
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
index ea0a704da9b8..5f9d56754e39 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
@@ -39,12 +39,12 @@ int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages);
 int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages);
 int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages);
 int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages);
-int __pkvm_host_share_guest(u64 pfn, u64 gfn, struct pkvm_hyp_vcpu *vcpu,
+int __pkvm_host_share_guest(u64 pfn, u64 gfn, u64 nr_pages, struct pkvm_hyp_vcpu *vcpu,
 			    enum kvm_pgtable_prot prot);
-int __pkvm_host_unshare_guest(u64 gfn, struct pkvm_hyp_vm *hyp_vm);
+int __pkvm_host_unshare_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *hyp_vm);
 int __pkvm_host_relax_perms_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu, enum kvm_pgtable_prot prot);
-int __pkvm_host_wrprotect_guest(u64 gfn, struct pkvm_hyp_vm *hyp_vm);
-int __pkvm_host_test_clear_young_guest(u64 gfn, bool mkold, struct pkvm_hyp_vm *vm);
+int __pkvm_host_wrprotect_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *hyp_vm);
+int __pkvm_host_test_clear_young_guest(u64 gfn, u64 nr_pages, bool mkold, struct pkvm_hyp_vm *vm);
 int __pkvm_host_mkyoung_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu);
 
 bool addr_is_memory(phys_addr_t phys);
@@ -67,4 +67,10 @@ static __always_inline void __load_host_stage2(void)
 	else
 		write_sysreg(0, vttbr_el2);
 }
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+void pkvm_ownership_selftest(void *base);
+#else
+static inline void pkvm_ownership_selftest(void *base) { }
+#endif
 #endif /* __KVM_NVHE_MEM_PROTECT__ */
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/memory.h linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/memory.h
index 34233d586060..dee1a406b0c2 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/memory.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/memory.h
@@ -8,23 +8,30 @@
 #include <linux/types.h>
 
 /*
- * Bits 0-1 are reserved to track the memory ownership state of each page:
- *   00: The page is owned exclusively by the page-table owner.
- *   01: The page is owned by the page-table owner, but is shared
- *       with another entity.
- *   10: The page is shared with, but not owned by the page-table owner.
- *   11: Reserved for future use (lending).
+ * Bits 0-1 are used to encode the memory ownership state of each page from the
+ * point of view of a pKVM "component" (host, hyp, guest, ... see enum
+ * pkvm_component_id):
+ *   00: The page is owned and exclusively accessible by the component;
+ *   01: The page is owned and accessible by the component, but is also
+ *       accessible by another component;
+ *   10: The page is accessible but not owned by the component;
+ * The storage of this state depends on the component: either in the
+ * hyp_vmemmap for the host and hyp states or in PTE software bits for guests.
  */
 enum pkvm_page_state {
 	PKVM_PAGE_OWNED			= 0ULL,
 	PKVM_PAGE_SHARED_OWNED		= BIT(0),
 	PKVM_PAGE_SHARED_BORROWED	= BIT(1),
-	__PKVM_PAGE_RESERVED		= BIT(0) | BIT(1),
 
-	/* Meta-states which aren't encoded directly in the PTE's SW bits */
-	PKVM_NOPAGE			= BIT(2),
+	/*
+	 * 'Meta-states' are not stored directly in PTE SW bits for guest
+	 * states, but inferred from the context (e.g. invalid PTE entries).
+	 * For the host and hyp, meta-states are stored directly in the
+	 * struct hyp_page.
+	 */
+	PKVM_NOPAGE			= BIT(0) | BIT(1),
 };
-#define PKVM_PAGE_META_STATES_MASK	(~__PKVM_PAGE_RESERVED)
+#define PKVM_PAGE_STATE_MASK		(BIT(0) | BIT(1))
 
 #define PKVM_PAGE_STATE_PROT_MASK	(KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1)
 static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot,
@@ -44,8 +51,15 @@ struct hyp_page {
 	u16 refcount;
 	u8 order;
 
-	/* Host (non-meta) state. Guarded by the host stage-2 lock. */
-	enum pkvm_page_state host_state : 8;
+	/* Host state. Guarded by the host stage-2 lock. */
+	unsigned __host_state : 4;
+
+	/*
+	 * Complement of the hyp state. Guarded by the hyp stage-1 lock. We use
+	 * the complement so that the initial 0 in __hyp_state_comp (due to the
+	 * entire vmemmap starting off zeroed) encodes PKVM_NOPAGE.
+	 */
+	unsigned __hyp_state_comp : 4;
 
 	u32 host_share_guest_count;
 };
@@ -82,6 +96,26 @@ static inline struct hyp_page *hyp_phys_to_page(phys_addr_t phys)
 #define hyp_page_to_virt(page)	__hyp_va(hyp_page_to_phys(page))
 #define hyp_page_to_pool(page)	(((struct hyp_page *)page)->pool)
 
+static inline enum pkvm_page_state get_host_state(struct hyp_page *p)
+{
+	return p->__host_state;
+}
+
+static inline void set_host_state(struct hyp_page *p, enum pkvm_page_state state)
+{
+	p->__host_state = state;
+}
+
+static inline enum pkvm_page_state get_hyp_state(struct hyp_page *p)
+{
+	return p->__hyp_state_comp ^ PKVM_PAGE_STATE_MASK;
+}
+
+static inline void set_hyp_state(struct hyp_page *p, enum pkvm_page_state state)
+{
+	p->__hyp_state_comp = state ^ PKVM_PAGE_STATE_MASK;
+}
+
 /*
  * Refcounting for 'struct hyp_page'.
  * hyp_pool::lock must be held if atomic access to the refcount is required.
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/mm.h linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/mm.h
index 230e4f2527de..6e83ce35c2f2 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/include/nvhe/mm.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/include/nvhe/mm.h
@@ -13,9 +13,11 @@
 extern struct kvm_pgtable pkvm_pgtable;
 extern hyp_spinlock_t pkvm_pgd_lock;
 
-int hyp_create_pcpu_fixmap(void);
+int hyp_create_fixmap(void);
 void *hyp_fixmap_map(phys_addr_t phys);
 void hyp_fixmap_unmap(void);
+void *hyp_fixblock_map(phys_addr_t phys, size_t *size);
+void hyp_fixblock_unmap(void);
 
 int hyp_create_idmap(u32 hyp_va_bits);
 int hyp_map_vectors(void);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/Makefile linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/Makefile
index b43426a493df..a76522d63c3e 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -99,3 +99,9 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS), $(KBUILD_CFLAG
 # causes a build failure. Remove profile optimization flags.
 KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))
 KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
+
+ifeq ($(CONFIG_UBSAN_KVM_EL2),y)
+UBSAN_SANITIZE := y
+# Always use brk and not hooks
+ccflags-y += $(CFLAGS_UBSAN_TRAP)
+endif
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/host.S linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/host.S
index 58f0cb2298cc..eef15b374abb 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/host.S
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/host.S
@@ -124,7 +124,7 @@ SYM_FUNC_START(__hyp_do_panic)
 	/* Ensure host stage-2 is disabled */
 	mrs	x0, hcr_el2
 	bic	x0, x0, #HCR_VM
-	msr	hcr_el2, x0
+	msr_hcr_el2 x0
 	isb
 	tlbi	vmalls12e1
 	dsb	nsh
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index f8af11189572..aada42522e7b 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -100,7 +100,7 @@ SYM_CODE_START_LOCAL(___kvm_hyp_init)
 	msr	mair_el2, x1
 
 	ldr	x1, [x0, #NVHE_INIT_HCR_EL2]
-	msr	hcr_el2, x1
+	msr_hcr_el2 x1
 
 	mov	x2, #HCR_E2H
 	and	x2, x1, x2
@@ -262,7 +262,7 @@ reset:
 
 alternative_if ARM64_KVM_PROTECTED_MODE
 	mov_q	x5, HCR_HOST_NVHE_FLAGS
-	msr	hcr_el2, x5
+	msr_hcr_el2 x5
 alternative_else_nop_endif
 
 	/* Install stub vectors */
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp-main.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index 2c37680d954c..3206b2c07f82 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -26,7 +26,7 @@ void __kvm_hyp_host_forward_smc(struct kvm_cpu_context *host_ctxt);
 
 static void __hyp_sve_save_guest(struct kvm_vcpu *vcpu)
 {
-	__vcpu_sys_reg(vcpu, ZCR_EL1) = read_sysreg_el1(SYS_ZCR);
+	__vcpu_assign_sys_reg(vcpu, ZCR_EL1, read_sysreg_el1(SYS_ZCR));
 	/*
 	 * On saving/restoring guest sve state, always use the maximum VL for
 	 * the guest. The layout of the data when saving the sve state depends
@@ -69,7 +69,10 @@ static void fpsimd_sve_sync(struct kvm_vcpu *vcpu)
 	if (!guest_owns_fp_regs())
 		return;
 
-	cpacr_clear_set(0, CPACR_EL1_FPEN | CPACR_EL1_ZEN);
+	/*
+	 * Traps have been disabled by __deactivate_cptr_traps(), but there
+	 * hasn't necessarily been a context synchronization event yet.
+	 */
 	isb();
 
 	if (vcpu_has_sve(vcpu))
@@ -79,7 +82,7 @@ static void fpsimd_sve_sync(struct kvm_vcpu *vcpu)
 
 	has_fpmr = kvm_has_fpmr(kern_hyp_va(vcpu->kvm));
 	if (has_fpmr)
-		__vcpu_sys_reg(vcpu, FPMR) = read_sysreg_s(SYS_FPMR);
+		__vcpu_assign_sys_reg(vcpu, FPMR, read_sysreg_s(SYS_FPMR));
 
 	if (system_supports_sve())
 		__hyp_sve_restore_host();
@@ -123,10 +126,6 @@ static void flush_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 
 	hyp_vcpu->vcpu.arch.ctxt	= host_vcpu->arch.ctxt;
 
-	hyp_vcpu->vcpu.arch.sve_state	= kern_hyp_va(host_vcpu->arch.sve_state);
-	/* Limit guest vector length to the maximum supported by the host.  */
-	hyp_vcpu->vcpu.arch.sve_max_vl	= min(host_vcpu->arch.sve_max_vl, kvm_host_sve_max_vl);
-
 	hyp_vcpu->vcpu.arch.mdcr_el2	= host_vcpu->arch.mdcr_el2;
 	hyp_vcpu->vcpu.arch.hcr_el2 &= ~(HCR_TWI | HCR_TWE);
 	hyp_vcpu->vcpu.arch.hcr_el2 |= READ_ONCE(host_vcpu->arch.hcr_el2) &
@@ -249,7 +248,8 @@ static void handle___pkvm_host_share_guest(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(u64, pfn, host_ctxt, 1);
 	DECLARE_REG(u64, gfn, host_ctxt, 2);
-	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 3);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 4);
 	struct pkvm_hyp_vcpu *hyp_vcpu;
 	int ret = -EINVAL;
 
@@ -264,7 +264,7 @@ static void handle___pkvm_host_share_guest(struct kvm_cpu_context *host_ctxt)
 	if (ret)
 		goto out;
 
-	ret = __pkvm_host_share_guest(pfn, gfn, hyp_vcpu, prot);
+	ret = __pkvm_host_share_guest(pfn, gfn, nr_pages, hyp_vcpu, prot);
 out:
 	cpu_reg(host_ctxt, 1) =  ret;
 }
@@ -273,6 +273,7 @@ static void handle___pkvm_host_unshare_guest(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
 	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
 	struct pkvm_hyp_vm *hyp_vm;
 	int ret = -EINVAL;
 
@@ -283,7 +284,7 @@ static void handle___pkvm_host_unshare_guest(struct kvm_cpu_context *host_ctxt)
 	if (!hyp_vm)
 		goto out;
 
-	ret = __pkvm_host_unshare_guest(gfn, hyp_vm);
+	ret = __pkvm_host_unshare_guest(gfn, nr_pages, hyp_vm);
 	put_pkvm_hyp_vm(hyp_vm);
 out:
 	cpu_reg(host_ctxt, 1) =  ret;
@@ -312,6 +313,7 @@ static void handle___pkvm_host_wrprotect_guest(struct kvm_cpu_context *host_ctxt
 {
 	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
 	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
 	struct pkvm_hyp_vm *hyp_vm;
 	int ret = -EINVAL;
 
@@ -322,7 +324,7 @@ static void handle___pkvm_host_wrprotect_guest(struct kvm_cpu_context *host_ctxt
 	if (!hyp_vm)
 		goto out;
 
-	ret = __pkvm_host_wrprotect_guest(gfn, hyp_vm);
+	ret = __pkvm_host_wrprotect_guest(gfn, nr_pages, hyp_vm);
 	put_pkvm_hyp_vm(hyp_vm);
 out:
 	cpu_reg(host_ctxt, 1) = ret;
@@ -332,7 +334,8 @@ static void handle___pkvm_host_test_clear_young_guest(struct kvm_cpu_context *ho
 {
 	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
 	DECLARE_REG(u64, gfn, host_ctxt, 2);
-	DECLARE_REG(bool, mkold, host_ctxt, 3);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	DECLARE_REG(bool, mkold, host_ctxt, 4);
 	struct pkvm_hyp_vm *hyp_vm;
 	int ret = -EINVAL;
 
@@ -343,7 +346,7 @@ static void handle___pkvm_host_test_clear_young_guest(struct kvm_cpu_context *ho
 	if (!hyp_vm)
 		goto out;
 
-	ret = __pkvm_host_test_clear_young_guest(gfn, mkold, hyp_vm);
+	ret = __pkvm_host_test_clear_young_guest(gfn, nr_pages, mkold, hyp_vm);
 	put_pkvm_hyp_vm(hyp_vm);
 out:
 	cpu_reg(host_ctxt, 1) = ret;
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp.lds.S linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
index f4562f417d3f..d724f6d69302 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
@@ -25,5 +25,7 @@ SECTIONS {
 	BEGIN_HYP_SECTION(.data..percpu)
 		PERCPU_INPUT(L1_CACHE_BYTES)
 	END_HYP_SECTION
+
 	HYP_SECTION(.bss)
+	HYP_SECTION(.data)
 }
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index e80f3ebd3e2a..8957734d6183 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -60,6 +60,11 @@ static void hyp_unlock_component(void)
 	hyp_spin_unlock(&pkvm_pgd_lock);
 }
 
+#define for_each_hyp_page(__p, __st, __sz)				\
+	for (struct hyp_page *__p = hyp_phys_to_page(__st),		\
+			     *__e = __p + ((__sz) >> PAGE_SHIFT);	\
+	     __p < __e; __p++)
+
 static void *host_s2_zalloc_pages_exact(size_t size)
 {
 	void *addr = hyp_alloc_pages(&host_s2_pool, get_order(size));
@@ -161,12 +166,6 @@ int kvm_host_prepare_stage2(void *pgt_pool_base)
 	return 0;
 }
 
-static bool guest_stage2_force_pte_cb(u64 addr, u64 end,
-				      enum kvm_pgtable_prot prot)
-{
-	return true;
-}
-
 static void *guest_s2_zalloc_pages_exact(size_t size)
 {
 	void *addr = hyp_alloc_pages(&current_vm->pool, get_order(size));
@@ -217,16 +216,42 @@ static void guest_s2_put_page(void *addr)
 	hyp_put_page(&current_vm->pool, addr);
 }
 
+static void __apply_guest_page(void *va, size_t size,
+			       void (*func)(void *addr, size_t size))
+{
+	size += va - PTR_ALIGN_DOWN(va, PAGE_SIZE);
+	va = PTR_ALIGN_DOWN(va, PAGE_SIZE);
+	size = PAGE_ALIGN(size);
+
+	while (size) {
+		size_t map_size = PAGE_SIZE;
+		void *map;
+
+		if (IS_ALIGNED((unsigned long)va, PMD_SIZE) && size >= PMD_SIZE)
+			map = hyp_fixblock_map(__hyp_pa(va), &map_size);
+		else
+			map = hyp_fixmap_map(__hyp_pa(va));
+
+		func(map, map_size);
+
+		if (map_size == PMD_SIZE)
+			hyp_fixblock_unmap();
+		else
+			hyp_fixmap_unmap();
+
+		size -= map_size;
+		va += map_size;
+	}
+}
+
 static void clean_dcache_guest_page(void *va, size_t size)
 {
-	__clean_dcache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
-	hyp_fixmap_unmap();
+	__apply_guest_page(va, size, __clean_dcache_guest_page);
 }
 
 static void invalidate_icache_guest_page(void *va, size_t size)
 {
-	__invalidate_icache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
-	hyp_fixmap_unmap();
+	__apply_guest_page(va, size, __invalidate_icache_guest_page);
 }
 
 int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
@@ -255,8 +280,7 @@ int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
 	};
 
 	guest_lock_component(vm);
-	ret = __kvm_pgtable_stage2_init(mmu->pgt, mmu, &vm->mm_ops, 0,
-					guest_stage2_force_pte_cb);
+	ret = __kvm_pgtable_stage2_init(mmu->pgt, mmu, &vm->mm_ops, 0, NULL);
 	guest_unlock_component(vm);
 	if (ret)
 		return ret;
@@ -309,7 +333,7 @@ int __pkvm_prot_finalize(void)
 	 */
 	kvm_flush_dcache_to_poc(params, sizeof(*params));
 
-	write_sysreg(params->hcr_el2, hcr_el2);
+	write_sysreg_hcr(params->hcr_el2);
 	__load_stage2(&host_mmu.arch.mmu, &host_mmu.arch);
 
 	/*
@@ -455,6 +479,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 {
 	struct kvm_mem_range cur;
 	kvm_pte_t pte;
+	u64 granule;
 	s8 level;
 	int ret;
 
@@ -467,22 +492,26 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 		return -EAGAIN;
 
 	if (pte) {
-		WARN_ON(addr_is_memory(addr) && hyp_phys_to_page(addr)->host_state != PKVM_NOPAGE);
+		WARN_ON(addr_is_memory(addr) &&
+			get_host_state(hyp_phys_to_page(addr)) != PKVM_NOPAGE);
 		return -EPERM;
 	}
 
-	do {
-		u64 granule = kvm_granule_size(level);
+	for (; level <= KVM_PGTABLE_LAST_LEVEL; level++) {
+		if (!kvm_level_supports_block_mapping(level))
+			continue;
+		granule = kvm_granule_size(level);
 		cur.start = ALIGN_DOWN(addr, granule);
 		cur.end = cur.start + granule;
-		level++;
-	} while ((level <= KVM_PGTABLE_LAST_LEVEL) &&
-			!(kvm_level_supports_block_mapping(level) &&
-			  range_included(&cur, range)));
+		if (!range_included(&cur, range))
+			continue;
+		*range = cur;
+		return 0;
+	}
 
-	*range = cur;
+	WARN_ON(1);
 
-	return 0;
+	return -EINVAL;
 }
 
 int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
@@ -493,10 +522,8 @@ int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
 
 static void __host_update_page_state(phys_addr_t addr, u64 size, enum pkvm_page_state state)
 {
-	phys_addr_t end = addr + size;
-
-	for (; addr < end; addr += PAGE_SIZE)
-		hyp_phys_to_page(addr)->host_state = state;
+	for_each_hyp_page(page, addr, size)
+		set_host_state(page, state);
 }
 
 int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
@@ -618,16 +645,16 @@ static int check_page_state_range(struct kvm_pgtable *pgt, u64 addr, u64 size,
 static int __host_check_page_state_range(u64 addr, u64 size,
 					 enum pkvm_page_state state)
 {
-	u64 end = addr + size;
 	int ret;
 
-	ret = check_range_allowed_memory(addr, end);
+	ret = check_range_allowed_memory(addr, addr + size);
 	if (ret)
 		return ret;
 
 	hyp_assert_lock_held(&host_mmu.lock);
-	for (; addr < end; addr += PAGE_SIZE) {
-		if (hyp_phys_to_page(addr)->host_state != state)
+
+	for_each_hyp_page(page, addr, size) {
+		if (get_host_state(page) != state)
 			return -EPERM;
 	}
 
@@ -637,7 +664,7 @@ static int __host_check_page_state_range(u64 addr, u64 size,
 static int __host_set_page_state_range(u64 addr, u64 size,
 				       enum pkvm_page_state state)
 {
-	if (hyp_phys_to_page(addr)->host_state == PKVM_NOPAGE) {
+	if (get_host_state(hyp_phys_to_page(addr)) == PKVM_NOPAGE) {
 		int ret = host_stage2_idmap_locked(addr, size, PKVM_HOST_MEM_PROT);
 
 		if (ret)
@@ -649,24 +676,20 @@ static int __host_set_page_state_range(u64 addr, u64 size,
 	return 0;
 }
 
-static enum pkvm_page_state hyp_get_page_state(kvm_pte_t pte, u64 addr)
+static void __hyp_set_page_state_range(phys_addr_t phys, u64 size, enum pkvm_page_state state)
 {
-	if (!kvm_pte_valid(pte))
-		return PKVM_NOPAGE;
-
-	return pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
+	for_each_hyp_page(page, phys, size)
+		set_hyp_state(page, state);
 }
 
-static int __hyp_check_page_state_range(u64 addr, u64 size,
-					enum pkvm_page_state state)
+static int __hyp_check_page_state_range(phys_addr_t phys, u64 size, enum pkvm_page_state state)
 {
-	struct check_walk_data d = {
-		.desired	= state,
-		.get_page_state	= hyp_get_page_state,
-	};
+	for_each_hyp_page(page, phys, size) {
+		if (get_hyp_state(page) != state)
+			return -EPERM;
+	}
 
-	hyp_assert_lock_held(&pkvm_pgd_lock);
-	return check_page_state_range(&pkvm_pgtable, addr, size, &d);
+	return 0;
 }
 
 static enum pkvm_page_state guest_get_page_state(kvm_pte_t pte, u64 addr)
@@ -677,10 +700,9 @@ static enum pkvm_page_state guest_get_page_state(kvm_pte_t pte, u64 addr)
 	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
 }
 
-static int __guest_check_page_state_range(struct pkvm_hyp_vcpu *vcpu, u64 addr,
+static int __guest_check_page_state_range(struct pkvm_hyp_vm *vm, u64 addr,
 					  u64 size, enum pkvm_page_state state)
 {
-	struct pkvm_hyp_vm *vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
 	struct check_walk_data d = {
 		.desired	= state,
 		.get_page_state	= guest_get_page_state,
@@ -693,8 +715,6 @@ static int __guest_check_page_state_range(struct pkvm_hyp_vcpu *vcpu, u64 addr,
 int __pkvm_host_share_hyp(u64 pfn)
 {
 	u64 phys = hyp_pfn_to_phys(pfn);
-	void *virt = __hyp_va(phys);
-	enum kvm_pgtable_prot prot;
 	u64 size = PAGE_SIZE;
 	int ret;
 
@@ -704,14 +724,11 @@ int __pkvm_host_share_hyp(u64 pfn)
 	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
 	if (ret)
 		goto unlock;
-	if (IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
-		ret = __hyp_check_page_state_range((u64)virt, size, PKVM_NOPAGE);
-		if (ret)
-			goto unlock;
-	}
+	ret = __hyp_check_page_state_range(phys, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-	prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_SHARED_BORROWED);
-	WARN_ON(pkvm_create_mappings_locked(virt, virt + size, prot));
+	__hyp_set_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
 	WARN_ON(__host_set_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED));
 
 unlock:
@@ -734,7 +751,7 @@ int __pkvm_host_unshare_hyp(u64 pfn)
 	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
 	if (ret)
 		goto unlock;
-	ret = __hyp_check_page_state_range(virt, size, PKVM_PAGE_SHARED_BORROWED);
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
 	if (ret)
 		goto unlock;
 	if (hyp_page_count((void *)virt)) {
@@ -742,7 +759,7 @@ int __pkvm_host_unshare_hyp(u64 pfn)
 		goto unlock;
 	}
 
-	WARN_ON(kvm_pgtable_hyp_unmap(&pkvm_pgtable, virt, size) != size);
+	__hyp_set_page_state_range(phys, size, PKVM_NOPAGE);
 	WARN_ON(__host_set_page_state_range(phys, size, PKVM_PAGE_OWNED));
 
 unlock:
@@ -757,7 +774,6 @@ int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages)
 	u64 phys = hyp_pfn_to_phys(pfn);
 	u64 size = PAGE_SIZE * nr_pages;
 	void *virt = __hyp_va(phys);
-	enum kvm_pgtable_prot prot;
 	int ret;
 
 	host_lock_component();
@@ -766,14 +782,12 @@ int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages)
 	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
 	if (ret)
 		goto unlock;
-	if (IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
-		ret = __hyp_check_page_state_range((u64)virt, size, PKVM_NOPAGE);
-		if (ret)
-			goto unlock;
-	}
+	ret = __hyp_check_page_state_range(phys, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-	prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_OWNED);
-	WARN_ON(pkvm_create_mappings_locked(virt, virt + size, prot));
+	__hyp_set_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	WARN_ON(pkvm_create_mappings_locked(virt, virt + size, PAGE_HYP));
 	WARN_ON(host_stage2_set_owner_locked(phys, size, PKVM_ID_HYP));
 
 unlock:
@@ -793,15 +807,14 @@ int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages)
 	host_lock_component();
 	hyp_lock_component();
 
-	ret = __hyp_check_page_state_range(virt, size, PKVM_PAGE_OWNED);
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	if (ret)
+		goto unlock;
+	ret = __host_check_page_state_range(phys, size, PKVM_NOPAGE);
 	if (ret)
 		goto unlock;
-	if (IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
-		ret = __host_check_page_state_range(phys, size, PKVM_NOPAGE);
-		if (ret)
-			goto unlock;
-	}
 
+	__hyp_set_page_state_range(phys, size, PKVM_NOPAGE);
 	WARN_ON(kvm_pgtable_hyp_unmap(&pkvm_pgtable, virt, size) != size);
 	WARN_ON(host_stage2_set_owner_locked(phys, size, PKVM_ID_HOST));
 
@@ -816,24 +829,30 @@ int hyp_pin_shared_mem(void *from, void *to)
 {
 	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
 	u64 end = PAGE_ALIGN((u64)to);
+	u64 phys = __hyp_pa(start);
 	u64 size = end - start;
+	struct hyp_page *p;
 	int ret;
 
 	host_lock_component();
 	hyp_lock_component();
 
-	ret = __host_check_page_state_range(__hyp_pa(start), size,
-					    PKVM_PAGE_SHARED_OWNED);
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
 	if (ret)
 		goto unlock;
 
-	ret = __hyp_check_page_state_range(start, size,
-					   PKVM_PAGE_SHARED_BORROWED);
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
 	if (ret)
 		goto unlock;
 
-	for (cur = start; cur < end; cur += PAGE_SIZE)
-		hyp_page_ref_inc(hyp_virt_to_page(cur));
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		p = hyp_virt_to_page(cur);
+		hyp_page_ref_inc(p);
+		if (p->refcount == 1)
+			WARN_ON(pkvm_create_mappings_locked((void *)cur,
+							    (void *)cur + PAGE_SIZE,
+							    PAGE_HYP));
+	}
 
 unlock:
 	hyp_unlock_component();
@@ -846,12 +865,17 @@ void hyp_unpin_shared_mem(void *from, void *to)
 {
 	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
 	u64 end = PAGE_ALIGN((u64)to);
+	struct hyp_page *p;
 
 	host_lock_component();
 	hyp_lock_component();
 
-	for (cur = start; cur < end; cur += PAGE_SIZE)
-		hyp_page_ref_dec(hyp_virt_to_page(cur));
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		p = hyp_virt_to_page(cur);
+		if (p->refcount == 1)
+			WARN_ON(kvm_pgtable_hyp_unmap(&pkvm_pgtable, cur, PAGE_SIZE) != PAGE_SIZE);
+		hyp_page_ref_dec(p);
+	}
 
 	hyp_unlock_component();
 	host_unlock_component();
@@ -887,49 +911,84 @@ int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages)
 	return ret;
 }
 
-int __pkvm_host_share_guest(u64 pfn, u64 gfn, struct pkvm_hyp_vcpu *vcpu,
+static int __guest_check_transition_size(u64 phys, u64 ipa, u64 nr_pages, u64 *size)
+{
+	size_t block_size;
+
+	if (nr_pages == 1) {
+		*size = PAGE_SIZE;
+		return 0;
+	}
+
+	/* We solely support second to last level huge mapping */
+	block_size = kvm_granule_size(KVM_PGTABLE_LAST_LEVEL - 1);
+
+	if (nr_pages != block_size >> PAGE_SHIFT)
+		return -EINVAL;
+
+	if (!IS_ALIGNED(phys | ipa, block_size))
+		return -EINVAL;
+
+	*size = block_size;
+	return 0;
+}
+
+int __pkvm_host_share_guest(u64 pfn, u64 gfn, u64 nr_pages, struct pkvm_hyp_vcpu *vcpu,
 			    enum kvm_pgtable_prot prot)
 {
 	struct pkvm_hyp_vm *vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
 	u64 phys = hyp_pfn_to_phys(pfn);
 	u64 ipa = hyp_pfn_to_phys(gfn);
-	struct hyp_page *page;
+	u64 size;
 	int ret;
 
 	if (prot & ~KVM_PGTABLE_PROT_RWX)
 		return -EINVAL;
 
-	ret = check_range_allowed_memory(phys, phys + PAGE_SIZE);
+	ret = __guest_check_transition_size(phys, ipa, nr_pages, &size);
+	if (ret)
+		return ret;
+
+	ret = check_range_allowed_memory(phys, phys + size);
 	if (ret)
 		return ret;
 
 	host_lock_component();
 	guest_lock_component(vm);
 
-	ret = __guest_check_page_state_range(vcpu, ipa, PAGE_SIZE, PKVM_NOPAGE);
+	ret = __guest_check_page_state_range(vm, ipa, size, PKVM_NOPAGE);
 	if (ret)
 		goto unlock;
 
-	page = hyp_phys_to_page(phys);
-	switch (page->host_state) {
-	case PKVM_PAGE_OWNED:
-		WARN_ON(__host_set_page_state_range(phys, PAGE_SIZE, PKVM_PAGE_SHARED_OWNED));
-		break;
-	case PKVM_PAGE_SHARED_OWNED:
-		if (page->host_share_guest_count)
-			break;
-		/* Only host to np-guest multi-sharing is tolerated */
-		WARN_ON(1);
-		fallthrough;
-	default:
-		ret = -EPERM;
-		goto unlock;
+	for_each_hyp_page(page, phys, size) {
+		switch (get_host_state(page)) {
+		case PKVM_PAGE_OWNED:
+			continue;
+		case PKVM_PAGE_SHARED_OWNED:
+			if (page->host_share_guest_count == U32_MAX) {
+				ret = -EBUSY;
+				goto unlock;
+			}
+
+			/* Only host to np-guest multi-sharing is tolerated */
+			if (page->host_share_guest_count)
+				continue;
+
+			fallthrough;
+		default:
+			ret = -EPERM;
+			goto unlock;
+		}
 	}
 
-	WARN_ON(kvm_pgtable_stage2_map(&vm->pgt, ipa, PAGE_SIZE, phys,
+	for_each_hyp_page(page, phys, size) {
+		set_host_state(page, PKVM_PAGE_SHARED_OWNED);
+		page->host_share_guest_count++;
+	}
+
+	WARN_ON(kvm_pgtable_stage2_map(&vm->pgt, ipa, size, phys,
 				       pkvm_mkstate(prot, PKVM_PAGE_SHARED_BORROWED),
 				       &vcpu->vcpu.arch.pkvm_memcache, 0));
-	page->host_share_guest_count++;
 
 unlock:
 	guest_unlock_component(vm);
@@ -938,10 +997,9 @@ unlock:
 	return ret;
 }
 
-static int __check_host_shared_guest(struct pkvm_hyp_vm *vm, u64 *__phys, u64 ipa)
+static int __check_host_shared_guest(struct pkvm_hyp_vm *vm, u64 *__phys, u64 ipa, u64 size)
 {
 	enum pkvm_page_state state;
-	struct hyp_page *page;
 	kvm_pte_t pte;
 	u64 phys;
 	s8 level;
@@ -952,7 +1010,7 @@ static int __check_host_shared_guest(struct pkvm_hyp_vm *vm, u64 *__phys, u64 ip
 		return ret;
 	if (!kvm_pte_valid(pte))
 		return -ENOENT;
-	if (level != KVM_PGTABLE_LAST_LEVEL)
+	if (kvm_granule_size(level) != size)
 		return -E2BIG;
 
 	state = guest_get_page_state(pte, ipa);
@@ -960,43 +1018,49 @@ static int __check_host_shared_guest(struct pkvm_hyp_vm *vm, u64 *__phys, u64 ip
 		return -EPERM;
 
 	phys = kvm_pte_to_phys(pte);
-	ret = check_range_allowed_memory(phys, phys + PAGE_SIZE);
+	ret = check_range_allowed_memory(phys, phys + size);
 	if (WARN_ON(ret))
 		return ret;
 
-	page = hyp_phys_to_page(phys);
-	if (page->host_state != PKVM_PAGE_SHARED_OWNED)
-		return -EPERM;
-	if (WARN_ON(!page->host_share_guest_count))
-		return -EINVAL;
+	for_each_hyp_page(page, phys, size) {
+		if (get_host_state(page) != PKVM_PAGE_SHARED_OWNED)
+			return -EPERM;
+		if (WARN_ON(!page->host_share_guest_count))
+			return -EINVAL;
+	}
 
 	*__phys = phys;
 
 	return 0;
 }
 
-int __pkvm_host_unshare_guest(u64 gfn, struct pkvm_hyp_vm *vm)
+int __pkvm_host_unshare_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *vm)
 {
 	u64 ipa = hyp_pfn_to_phys(gfn);
-	struct hyp_page *page;
-	u64 phys;
+	u64 size, phys;
 	int ret;
 
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
+	if (ret)
+		return ret;
+
 	host_lock_component();
 	guest_lock_component(vm);
 
-	ret = __check_host_shared_guest(vm, &phys, ipa);
+	ret = __check_host_shared_guest(vm, &phys, ipa, size);
 	if (ret)
 		goto unlock;
 
-	ret = kvm_pgtable_stage2_unmap(&vm->pgt, ipa, PAGE_SIZE);
+	ret = kvm_pgtable_stage2_unmap(&vm->pgt, ipa, size);
 	if (ret)
 		goto unlock;
 
-	page = hyp_phys_to_page(phys);
-	page->host_share_guest_count--;
-	if (!page->host_share_guest_count)
-		WARN_ON(__host_set_page_state_range(phys, PAGE_SIZE, PKVM_PAGE_OWNED));
+	for_each_hyp_page(page, phys, size) {
+		/* __check_host_shared_guest() protects against underflow */
+		page->host_share_guest_count--;
+		if (!page->host_share_guest_count)
+			set_host_state(page, PKVM_PAGE_OWNED);
+	}
 
 unlock:
 	guest_unlock_component(vm);
@@ -1005,7 +1069,7 @@ unlock:
 	return ret;
 }
 
-static void assert_host_shared_guest(struct pkvm_hyp_vm *vm, u64 ipa)
+static void assert_host_shared_guest(struct pkvm_hyp_vm *vm, u64 ipa, u64 size)
 {
 	u64 phys;
 	int ret;
@@ -1016,7 +1080,7 @@ static void assert_host_shared_guest(struct pkvm_hyp_vm *vm, u64 ipa)
 	host_lock_component();
 	guest_lock_component(vm);
 
-	ret = __check_host_shared_guest(vm, &phys, ipa);
+	ret = __check_host_shared_guest(vm, &phys, ipa, size);
 
 	guest_unlock_component(vm);
 	host_unlock_component();
@@ -1036,7 +1100,7 @@ int __pkvm_host_relax_perms_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu, enum kvm_
 	if (prot & ~KVM_PGTABLE_PROT_RWX)
 		return -EINVAL;
 
-	assert_host_shared_guest(vm, ipa);
+	assert_host_shared_guest(vm, ipa, PAGE_SIZE);
 	guest_lock_component(vm);
 	ret = kvm_pgtable_stage2_relax_perms(&vm->pgt, ipa, prot, 0);
 	guest_unlock_component(vm);
@@ -1044,33 +1108,41 @@ int __pkvm_host_relax_perms_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu, enum kvm_
 	return ret;
 }
 
-int __pkvm_host_wrprotect_guest(u64 gfn, struct pkvm_hyp_vm *vm)
+int __pkvm_host_wrprotect_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *vm)
 {
-	u64 ipa = hyp_pfn_to_phys(gfn);
+	u64 size, ipa = hyp_pfn_to_phys(gfn);
 	int ret;
 
 	if (pkvm_hyp_vm_is_protected(vm))
 		return -EPERM;
 
-	assert_host_shared_guest(vm, ipa);
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
+	if (ret)
+		return ret;
+
+	assert_host_shared_guest(vm, ipa, size);
 	guest_lock_component(vm);
-	ret = kvm_pgtable_stage2_wrprotect(&vm->pgt, ipa, PAGE_SIZE);
+	ret = kvm_pgtable_stage2_wrprotect(&vm->pgt, ipa, size);
 	guest_unlock_component(vm);
 
 	return ret;
 }
 
-int __pkvm_host_test_clear_young_guest(u64 gfn, bool mkold, struct pkvm_hyp_vm *vm)
+int __pkvm_host_test_clear_young_guest(u64 gfn, u64 nr_pages, bool mkold, struct pkvm_hyp_vm *vm)
 {
-	u64 ipa = hyp_pfn_to_phys(gfn);
+	u64 size, ipa = hyp_pfn_to_phys(gfn);
 	int ret;
 
 	if (pkvm_hyp_vm_is_protected(vm))
 		return -EPERM;
 
-	assert_host_shared_guest(vm, ipa);
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
+	if (ret)
+		return ret;
+
+	assert_host_shared_guest(vm, ipa, size);
 	guest_lock_component(vm);
-	ret = kvm_pgtable_stage2_test_clear_young(&vm->pgt, ipa, PAGE_SIZE, mkold);
+	ret = kvm_pgtable_stage2_test_clear_young(&vm->pgt, ipa, size, mkold);
 	guest_unlock_component(vm);
 
 	return ret;
@@ -1084,10 +1156,210 @@ int __pkvm_host_mkyoung_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu)
 	if (pkvm_hyp_vm_is_protected(vm))
 		return -EPERM;
 
-	assert_host_shared_guest(vm, ipa);
+	assert_host_shared_guest(vm, ipa, PAGE_SIZE);
 	guest_lock_component(vm);
 	kvm_pgtable_stage2_mkyoung(&vm->pgt, ipa, 0);
 	guest_unlock_component(vm);
 
 	return 0;
 }
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+struct pkvm_expected_state {
+	enum pkvm_page_state host;
+	enum pkvm_page_state hyp;
+	enum pkvm_page_state guest[2]; /* [ gfn, gfn + 1 ] */
+};
+
+static struct pkvm_expected_state selftest_state;
+static struct hyp_page *selftest_page;
+
+static struct pkvm_hyp_vm selftest_vm = {
+	.kvm = {
+		.arch = {
+			.mmu = {
+				.arch = &selftest_vm.kvm.arch,
+				.pgt = &selftest_vm.pgt,
+			},
+		},
+	},
+};
+
+static struct pkvm_hyp_vcpu selftest_vcpu = {
+	.vcpu = {
+		.arch = {
+			.hw_mmu = &selftest_vm.kvm.arch.mmu,
+		},
+		.kvm = &selftest_vm.kvm,
+	},
+};
+
+static void init_selftest_vm(void *virt)
+{
+	struct hyp_page *p = hyp_virt_to_page(virt);
+	int i;
+
+	selftest_vm.kvm.arch.mmu.vtcr = host_mmu.arch.mmu.vtcr;
+	WARN_ON(kvm_guest_prepare_stage2(&selftest_vm, virt));
+
+	for (i = 0; i < pkvm_selftest_pages(); i++) {
+		if (p[i].refcount)
+			continue;
+		p[i].refcount = 1;
+		hyp_put_page(&selftest_vm.pool, hyp_page_to_virt(&p[i]));
+	}
+}
+
+static u64 selftest_ipa(void)
+{
+	return BIT(selftest_vm.pgt.ia_bits - 1);
+}
+
+static void assert_page_state(void)
+{
+	void *virt = hyp_page_to_virt(selftest_page);
+	u64 size = PAGE_SIZE << selftest_page->order;
+	struct pkvm_hyp_vcpu *vcpu = &selftest_vcpu;
+	u64 phys = hyp_virt_to_phys(virt);
+	u64 ipa[2] = { selftest_ipa(), selftest_ipa() + PAGE_SIZE };
+	struct pkvm_hyp_vm *vm;
+
+	vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
+
+	host_lock_component();
+	WARN_ON(__host_check_page_state_range(phys, size, selftest_state.host));
+	host_unlock_component();
+
+	hyp_lock_component();
+	WARN_ON(__hyp_check_page_state_range(phys, size, selftest_state.hyp));
+	hyp_unlock_component();
+
+	guest_lock_component(&selftest_vm);
+	WARN_ON(__guest_check_page_state_range(vm, ipa[0], size, selftest_state.guest[0]));
+	WARN_ON(__guest_check_page_state_range(vm, ipa[1], size, selftest_state.guest[1]));
+	guest_unlock_component(&selftest_vm);
+}
+
+#define assert_transition_res(res, fn, ...)		\
+	do {						\
+		WARN_ON(fn(__VA_ARGS__) != res);	\
+		assert_page_state();			\
+	} while (0)
+
+void pkvm_ownership_selftest(void *base)
+{
+	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_RWX;
+	void *virt = hyp_alloc_pages(&host_s2_pool, 0);
+	struct pkvm_hyp_vcpu *vcpu = &selftest_vcpu;
+	struct pkvm_hyp_vm *vm = &selftest_vm;
+	u64 phys, size, pfn, gfn;
+
+	WARN_ON(!virt);
+	selftest_page = hyp_virt_to_page(virt);
+	selftest_page->refcount = 0;
+	init_selftest_vm(base);
+
+	size = PAGE_SIZE << selftest_page->order;
+	phys = hyp_virt_to_phys(virt);
+	pfn = hyp_phys_to_pfn(phys);
+	gfn = hyp_phys_to_pfn(selftest_ipa());
+
+	selftest_state.host = PKVM_NOPAGE;
+	selftest_state.hyp = PKVM_PAGE_OWNED;
+	selftest_state.guest[0] = selftest_state.guest[1] = PKVM_NOPAGE;
+	assert_page_state();
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.hyp = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	assert_transition_res(0,	hyp_pin_shared_mem, virt, virt + size);
+	assert_transition_res(0,	hyp_pin_shared_mem, virt, virt + size);
+	hyp_unpin_shared_mem(virt, virt + size);
+	WARN_ON(hyp_page_count(virt) != 1);
+	assert_transition_res(-EBUSY,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	hyp_unpin_shared_mem(virt, virt + size);
+	assert_page_state();
+	WARN_ON(hyp_page_count(virt));
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_hyp, pfn);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.guest[0] = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.guest[1] = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_guest, pfn, gfn + 1, 1, vcpu, prot);
+	WARN_ON(hyp_virt_to_page(virt)->host_share_guest_count != 2);
+
+	selftest_state.guest[0] = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	selftest_state.guest[1] = PKVM_NOPAGE;
+	selftest_state.host = PKVM_PAGE_OWNED;
+	assert_transition_res(0,	__pkvm_host_unshare_guest, gfn + 1, 1, vm);
+
+	selftest_state.host = PKVM_NOPAGE;
+	selftest_state.hyp = PKVM_PAGE_OWNED;
+	assert_transition_res(0,	__pkvm_host_donate_hyp, pfn, 1);
+
+	selftest_page->refcount = 1;
+	hyp_put_page(&host_s2_pool, virt);
+}
+#endif
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/mm.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
index f41c7440b34b..ae8391baebc3 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -229,9 +229,8 @@ int hyp_map_vectors(void)
 	return 0;
 }
 
-void *hyp_fixmap_map(phys_addr_t phys)
+static void *fixmap_map_slot(struct hyp_fixmap_slot *slot, phys_addr_t phys)
 {
-	struct hyp_fixmap_slot *slot = this_cpu_ptr(&fixmap_slots);
 	kvm_pte_t pte, *ptep = slot->ptep;
 
 	pte = *ptep;
@@ -243,10 +242,21 @@ void *hyp_fixmap_map(phys_addr_t phys)
 	return (void *)slot->addr;
 }
 
+void *hyp_fixmap_map(phys_addr_t phys)
+{
+	return fixmap_map_slot(this_cpu_ptr(&fixmap_slots), phys);
+}
+
 static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 {
 	kvm_pte_t *ptep = slot->ptep;
 	u64 addr = slot->addr;
+	u32 level;
+
+	if (FIELD_GET(KVM_PTE_TYPE, *ptep) == KVM_PTE_TYPE_PAGE)
+		level = KVM_PGTABLE_LAST_LEVEL;
+	else
+		level = KVM_PGTABLE_LAST_LEVEL - 1; /* create_fixblock() guarantees PMD level */
 
 	WRITE_ONCE(*ptep, *ptep & ~KVM_PTE_VALID);
 
@@ -260,7 +270,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
 	 */
 	dsb(ishst);
-	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL);
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), level);
 	dsb(ish);
 	isb();
 }
@@ -273,9 +283,9 @@ void hyp_fixmap_unmap(void)
 static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
 				   enum kvm_pgtable_walk_flags visit)
 {
-	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
+	struct hyp_fixmap_slot *slot = (struct hyp_fixmap_slot *)ctx->arg;
 
-	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL)
+	if (!kvm_pte_valid(ctx->old) || (ctx->end - ctx->start) != kvm_granule_size(ctx->level))
 		return -EINVAL;
 
 	slot->addr = ctx->addr;
@@ -296,13 +306,84 @@ static int create_fixmap_slot(u64 addr, u64 cpu)
 	struct kvm_pgtable_walker walker = {
 		.cb	= __create_fixmap_slot_cb,
 		.flags	= KVM_PGTABLE_WALK_LEAF,
-		.arg = (void *)cpu,
+		.arg	= per_cpu_ptr(&fixmap_slots, cpu),
 	};
 
 	return kvm_pgtable_walk(&pkvm_pgtable, addr, PAGE_SIZE, &walker);
 }
 
-int hyp_create_pcpu_fixmap(void)
+#if PAGE_SHIFT < 16
+#define HAS_FIXBLOCK
+static struct hyp_fixmap_slot hyp_fixblock_slot;
+static DEFINE_HYP_SPINLOCK(hyp_fixblock_lock);
+#endif
+
+static int create_fixblock(void)
+{
+#ifdef HAS_FIXBLOCK
+	struct kvm_pgtable_walker walker = {
+		.cb	= __create_fixmap_slot_cb,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= &hyp_fixblock_slot,
+	};
+	unsigned long addr;
+	phys_addr_t phys;
+	int ret, i;
+
+	/* Find a RAM phys address, PMD aligned */
+	for (i = 0; i < hyp_memblock_nr; i++) {
+		phys = ALIGN(hyp_memory[i].base, PMD_SIZE);
+		if (phys + PMD_SIZE < (hyp_memory[i].base + hyp_memory[i].size))
+			break;
+	}
+
+	if (i >= hyp_memblock_nr)
+		return -EINVAL;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	addr = ALIGN(__io_map_base, PMD_SIZE);
+	ret = __pkvm_alloc_private_va_range(addr, PMD_SIZE);
+	if (ret)
+		goto unlock;
+
+	ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr, PMD_SIZE, phys, PAGE_HYP);
+	if (ret)
+		goto unlock;
+
+	ret = kvm_pgtable_walk(&pkvm_pgtable, addr, PMD_SIZE, &walker);
+
+unlock:
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	return ret;
+#else
+	return 0;
+#endif
+}
+
+void *hyp_fixblock_map(phys_addr_t phys, size_t *size)
+{
+#ifdef HAS_FIXBLOCK
+	*size = PMD_SIZE;
+	hyp_spin_lock(&hyp_fixblock_lock);
+	return fixmap_map_slot(&hyp_fixblock_slot, phys);
+#else
+	*size = PAGE_SIZE;
+	return hyp_fixmap_map(phys);
+#endif
+}
+
+void hyp_fixblock_unmap(void)
+{
+#ifdef HAS_FIXBLOCK
+	fixmap_clear_slot(&hyp_fixblock_slot);
+	hyp_spin_unlock(&hyp_fixblock_lock);
+#else
+	hyp_fixmap_unmap();
+#endif
+}
+
+int hyp_create_fixmap(void)
 {
 	unsigned long addr, i;
 	int ret;
@@ -322,7 +403,7 @@ int hyp_create_pcpu_fixmap(void)
 			return ret;
 	}
 
-	return 0;
+	return create_fixblock();
 }
 
 int hyp_create_idmap(u32 hyp_va_bits)
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
index 5a335a51deca..338505cb0171 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -372,6 +372,18 @@ static void unpin_host_vcpu(struct kvm_vcpu *host_vcpu)
 		hyp_unpin_shared_mem(host_vcpu, host_vcpu + 1);
 }
 
+static void unpin_host_sve_state(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	void *sve_state;
+
+	if (!vcpu_has_feature(&hyp_vcpu->vcpu, KVM_ARM_VCPU_SVE))
+		return;
+
+	sve_state = kern_hyp_va(hyp_vcpu->vcpu.arch.sve_state);
+	hyp_unpin_shared_mem(sve_state,
+			     sve_state + vcpu_sve_state_size(&hyp_vcpu->vcpu));
+}
+
 static void unpin_host_vcpus(struct pkvm_hyp_vcpu *hyp_vcpus[],
 			     unsigned int nr_vcpus)
 {
@@ -384,6 +396,7 @@ static void unpin_host_vcpus(struct pkvm_hyp_vcpu *hyp_vcpus[],
 			continue;
 
 		unpin_host_vcpu(hyp_vcpu->host_vcpu);
+		unpin_host_sve_state(hyp_vcpu);
 	}
 }
 
@@ -398,12 +411,40 @@ static void init_pkvm_hyp_vm(struct kvm *host_kvm, struct pkvm_hyp_vm *hyp_vm,
 	pkvm_init_features_from_host(hyp_vm, host_kvm);
 }
 
-static void pkvm_vcpu_init_sve(struct pkvm_hyp_vcpu *hyp_vcpu, struct kvm_vcpu *host_vcpu)
+static int pkvm_vcpu_init_sve(struct pkvm_hyp_vcpu *hyp_vcpu, struct kvm_vcpu *host_vcpu)
 {
 	struct kvm_vcpu *vcpu = &hyp_vcpu->vcpu;
+	unsigned int sve_max_vl;
+	size_t sve_state_size;
+	void *sve_state;
+	int ret = 0;
 
-	if (!vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE))
+	if (!vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) {
 		vcpu_clear_flag(vcpu, VCPU_SVE_FINALIZED);
+		return 0;
+	}
+
+	/* Limit guest vector length to the maximum supported by the host. */
+	sve_max_vl = min(READ_ONCE(host_vcpu->arch.sve_max_vl), kvm_host_sve_max_vl);
+	sve_state_size = sve_state_size_from_vl(sve_max_vl);
+	sve_state = kern_hyp_va(READ_ONCE(host_vcpu->arch.sve_state));
+
+	if (!sve_state || !sve_state_size) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = hyp_pin_shared_mem(sve_state, sve_state + sve_state_size);
+	if (ret)
+		goto err;
+
+	vcpu->arch.sve_state = sve_state;
+	vcpu->arch.sve_max_vl = sve_max_vl;
+
+	return 0;
+err:
+	clear_bit(KVM_ARM_VCPU_SVE, vcpu->kvm->arch.vcpu_features);
+	return ret;
 }
 
 static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu,
@@ -432,7 +473,7 @@ static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu,
 	if (ret)
 		goto done;
 
-	pkvm_vcpu_init_sve(hyp_vcpu, host_vcpu);
+	ret = pkvm_vcpu_init_sve(hyp_vcpu, host_vcpu);
 done:
 	if (ret)
 		unpin_host_vcpu(host_vcpu);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/setup.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
index d62bcb5634a2..a48d3f5a5afb 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -28,6 +28,7 @@ static void *vmemmap_base;
 static void *vm_table_base;
 static void *hyp_pgt_base;
 static void *host_s2_pgt_base;
+static void *selftest_base;
 static void *ffa_proxy_pages;
 static struct kvm_pgtable_mm_ops pkvm_pgtable_mm_ops;
 static struct hyp_pool hpool;
@@ -38,6 +39,11 @@ static int divide_memory_pool(void *virt, unsigned long size)
 
 	hyp_early_alloc_init(virt, size);
 
+	nr_pages = pkvm_selftest_pages();
+	selftest_base = hyp_early_alloc_contig(nr_pages);
+	if (nr_pages && !selftest_base)
+		return -ENOMEM;
+
 	nr_pages = hyp_vmemmap_pages(sizeof(struct hyp_page));
 	vmemmap_base = hyp_early_alloc_contig(nr_pages);
 	if (!vmemmap_base)
@@ -119,6 +125,10 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 	if (ret)
 		return ret;
 
+	ret = pkvm_create_mappings(__hyp_data_start, __hyp_data_end, PAGE_HYP);
+	if (ret)
+		return ret;
+
 	ret = pkvm_create_mappings(__hyp_rodata_start, __hyp_rodata_end, PAGE_HYP_RO);
 	if (ret)
 		return ret;
@@ -180,6 +190,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 				     enum kvm_pgtable_walk_flags visit)
 {
 	enum pkvm_page_state state;
+	struct hyp_page *page;
 	phys_addr_t phys;
 
 	if (!kvm_pte_valid(ctx->old))
@@ -192,19 +203,25 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!addr_is_memory(phys))
 		return -EINVAL;
 
+	page = hyp_phys_to_page(phys);
+
 	/*
 	 * Adjust the host stage-2 mappings to match the ownership attributes
-	 * configured in the hypervisor stage-1.
+	 * configured in the hypervisor stage-1, and make sure to propagate them
+	 * to the hyp_vmemmap state.
 	 */
 	state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(ctx->old));
 	switch (state) {
 	case PKVM_PAGE_OWNED:
+		set_hyp_state(page, PKVM_PAGE_OWNED);
 		return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
 	case PKVM_PAGE_SHARED_OWNED:
-		hyp_phys_to_page(phys)->host_state = PKVM_PAGE_SHARED_BORROWED;
+		set_hyp_state(page, PKVM_PAGE_SHARED_OWNED);
+		set_host_state(page, PKVM_PAGE_SHARED_BORROWED);
 		break;
 	case PKVM_PAGE_SHARED_BORROWED:
-		hyp_phys_to_page(phys)->host_state = PKVM_PAGE_SHARED_OWNED;
+		set_hyp_state(page, PKVM_PAGE_SHARED_BORROWED);
+		set_host_state(page, PKVM_PAGE_SHARED_OWNED);
 		break;
 	default:
 		return -EINVAL;
@@ -295,7 +312,7 @@ void __noreturn __pkvm_init_finalise(void)
 	if (ret)
 		goto out;
 
-	ret = hyp_create_pcpu_fixmap();
+	ret = hyp_create_fixmap();
 	if (ret)
 		goto out;
 
@@ -304,6 +321,8 @@ void __noreturn __pkvm_init_finalise(void)
 		goto out;
 
 	pkvm_hyp_vm_table_init(vm_table_base);
+
+	pkvm_ownership_selftest(selftest_base);
 out:
 	/*
 	 * We tail-called to here from handle___pkvm_init() and will not return,
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/switch.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
index 7d2ba6ef0261..0e752b515d0f 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -33,66 +33,19 @@ DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data);
 DEFINE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
 DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
 
-extern void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
-
-static void __activate_cptr_traps(struct kvm_vcpu *vcpu)
-{
-	u64 val = CPTR_EL2_TAM;	/* Same bit irrespective of E2H */
-
-	if (!guest_owns_fp_regs())
-		__activate_traps_fpsimd32(vcpu);
-
-	if (has_hvhe()) {
-		val |= CPACR_EL1_TTA;
-
-		if (guest_owns_fp_regs()) {
-			val |= CPACR_EL1_FPEN;
-			if (vcpu_has_sve(vcpu))
-				val |= CPACR_EL1_ZEN;
-		}
-
-		write_sysreg(val, cpacr_el1);
-	} else {
-		val |= CPTR_EL2_TTA | CPTR_NVHE_EL2_RES1;
-
-		/*
-		 * Always trap SME since it's not supported in KVM.
-		 * TSM is RES1 if SME isn't implemented.
-		 */
-		val |= CPTR_EL2_TSM;
-
-		if (!vcpu_has_sve(vcpu) || !guest_owns_fp_regs())
-			val |= CPTR_EL2_TZ;
-
-		if (!guest_owns_fp_regs())
-			val |= CPTR_EL2_TFP;
+struct fgt_masks hfgrtr_masks;
+struct fgt_masks hfgwtr_masks;
+struct fgt_masks hfgitr_masks;
+struct fgt_masks hdfgrtr_masks;
+struct fgt_masks hdfgwtr_masks;
+struct fgt_masks hafgrtr_masks;
+struct fgt_masks hfgrtr2_masks;
+struct fgt_masks hfgwtr2_masks;
+struct fgt_masks hfgitr2_masks;
+struct fgt_masks hdfgrtr2_masks;
+struct fgt_masks hdfgwtr2_masks;
 
-		write_sysreg(val, cptr_el2);
-	}
-}
-
-static void __deactivate_cptr_traps(struct kvm_vcpu *vcpu)
-{
-	if (has_hvhe()) {
-		u64 val = CPACR_EL1_FPEN;
-
-		if (cpus_have_final_cap(ARM64_SVE))
-			val |= CPACR_EL1_ZEN;
-		if (cpus_have_final_cap(ARM64_SME))
-			val |= CPACR_EL1_SMEN;
-
-		write_sysreg(val, cpacr_el1);
-	} else {
-		u64 val = CPTR_NVHE_EL2_RES1;
-
-		if (!cpus_have_final_cap(ARM64_SVE))
-			val |= CPTR_EL2_TZ;
-		if (!cpus_have_final_cap(ARM64_SME))
-			val |= CPTR_EL2_TSM;
-
-		write_sysreg(val, cptr_el2);
-	}
-}
+extern void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
 
 static void __activate_traps(struct kvm_vcpu *vcpu)
 {
@@ -142,7 +95,7 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 
 	__deactivate_traps_common(vcpu);
 
-	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);
+	write_sysreg_hcr(this_cpu_ptr(&kvm_init_params)->hcr_el2);
 
 	__deactivate_cptr_traps(vcpu);
 	write_sysreg(__kvm_hyp_host_vector, vbar_el2);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/pgtable.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/pgtable.c
index df5cc74a7dd0..c351b4abd5db 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/pgtable.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/pgtable.c
@@ -11,12 +11,6 @@
 #include <asm/kvm_pgtable.h>
 #include <asm/stage2_pgtable.h>
 
-
-#define KVM_PTE_TYPE			BIT(1)
-#define KVM_PTE_TYPE_BLOCK		0
-#define KVM_PTE_TYPE_PAGE		1
-#define KVM_PTE_TYPE_TABLE		1
-
 struct kvm_pgtable_walk_data {
 	struct kvm_pgtable_walker	*walker;
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vgic-v3-sr.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vgic-v3-sr.c
index 50aa8dbcae75..f162b0df5cae 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vgic-v3-sr.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vgic-v3-sr.c
@@ -446,7 +446,7 @@ u64 __vgic_v3_get_gic_config(void)
 	if (has_vhe()) {
 		flags = local_daif_save();
 	} else {
-		sysreg_clear_set(hcr_el2, 0, HCR_AMO | HCR_FMO | HCR_IMO);
+		sysreg_clear_set_hcr(0, HCR_AMO | HCR_FMO | HCR_IMO);
 		isb();
 	}
 
@@ -461,7 +461,7 @@ u64 __vgic_v3_get_gic_config(void)
 	if (has_vhe()) {
 		local_daif_restore(flags);
 	} else {
-		sysreg_clear_set(hcr_el2, HCR_AMO | HCR_FMO | HCR_IMO, 0);
+		sysreg_clear_set_hcr(HCR_AMO | HCR_FMO | HCR_IMO, 0);
 		isb();
 	}
 
@@ -1058,11 +1058,11 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 	switch (sysreg) {
 	case SYS_ICC_IGRPEN0_EL1:
 		if (is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGRTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		if (!is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGWTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		fallthrough;
@@ -1079,11 +1079,11 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 
 	case SYS_ICC_IGRPEN1_EL1:
 		if (is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGRTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		if (!is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGWTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		fallthrough;
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/switch.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/switch.c
index 731a0378ed13..477f1580ffea 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/switch.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/switch.c
@@ -48,102 +48,46 @@ DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
 
 static u64 __compute_hcr(struct kvm_vcpu *vcpu)
 {
+	u64 guest_hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
 	u64 hcr = vcpu->arch.hcr_el2;
 
 	if (!vcpu_has_nv(vcpu))
 		return hcr;
 
+	/*
+	 * We rely on the invariant that a vcpu entered from HYP
+	 * context must also exit in the same context, as only an ERET
+	 * instruction can kick us out of it, and we obviously trap
+	 * that sucker. PSTATE.M will get fixed-up on exit.
+	 */
 	if (is_hyp_ctxt(vcpu)) {
+		host_data_set_flag(VCPU_IN_HYP_CONTEXT);
+
 		hcr |= HCR_NV | HCR_NV2 | HCR_AT | HCR_TTLB;
 
 		if (!vcpu_el2_e2h_is_set(vcpu))
 			hcr |= HCR_NV1;
 
 		write_sysreg_s(vcpu->arch.ctxt.vncr_array, SYS_VNCR_EL2);
-	}
-
-	return hcr | (__vcpu_sys_reg(vcpu, HCR_EL2) & ~NV_HCR_GUEST_EXCLUDE);
-}
-
-static void __activate_cptr_traps(struct kvm_vcpu *vcpu)
-{
-	u64 cptr;
-
-	/*
-	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
-	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
-	 * except for some missing controls, such as TAM.
-	 * In this case, CPTR_EL2.TAM has the same position with or without
-	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
-	 * shift value for trapping the AMU accesses.
-	 */
-	u64 val = CPACR_EL1_TTA | CPTR_EL2_TAM;
-
-	if (guest_owns_fp_regs()) {
-		val |= CPACR_EL1_FPEN;
-		if (vcpu_has_sve(vcpu))
-			val |= CPACR_EL1_ZEN;
 	} else {
-		__activate_traps_fpsimd32(vcpu);
-	}
-
-	if (!vcpu_has_nv(vcpu))
-		goto write;
-
-	/*
-	 * The architecture is a bit crap (what a surprise): an EL2 guest
-	 * writing to CPTR_EL2 via CPACR_EL1 can't set any of TCPAC or TTA,
-	 * as they are RES0 in the guest's view. To work around it, trap the
-	 * sucker using the very same bit it can't set...
-	 */
-	if (vcpu_el2_e2h_is_set(vcpu) && is_hyp_ctxt(vcpu))
-		val |= CPTR_EL2_TCPAC;
-
-	/*
-	 * Layer the guest hypervisor's trap configuration on top of our own if
-	 * we're in a nested context.
-	 */
-	if (is_hyp_ctxt(vcpu))
-		goto write;
-
-	cptr = vcpu_sanitised_cptr_el2(vcpu);
-
-	/*
-	 * Pay attention, there's some interesting detail here.
-	 *
-	 * The CPTR_EL2.xEN fields are 2 bits wide, although there are only two
-	 * meaningful trap states when HCR_EL2.TGE = 0 (running a nested guest):
-	 *
-	 *  - CPTR_EL2.xEN = x0, traps are enabled
-	 *  - CPTR_EL2.xEN = x1, traps are disabled
-	 *
-	 * In other words, bit[0] determines if guest accesses trap or not. In
-	 * the interest of simplicity, clear the entire field if the guest
-	 * hypervisor has traps enabled to dispel any illusion of something more
-	 * complicated taking place.
-	 */
-	if (!(SYS_FIELD_GET(CPACR_EL1, FPEN, cptr) & BIT(0)))
-		val &= ~CPACR_EL1_FPEN;
-	if (!(SYS_FIELD_GET(CPACR_EL1, ZEN, cptr) & BIT(0)))
-		val &= ~CPACR_EL1_ZEN;
+		host_data_clear_flag(VCPU_IN_HYP_CONTEXT);
 
-	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
-		val |= cptr & CPACR_EL1_E0POE;
+		if (guest_hcr & HCR_NV) {
+			u64 va = __fix_to_virt(vncr_fixmap(smp_processor_id()));
 
-	val |= cptr & CPTR_EL2_TCPAC;
+			/* Inherit the low bits from the actual register */
+			va |= __vcpu_sys_reg(vcpu, VNCR_EL2) & GENMASK(PAGE_SHIFT - 1, 0);
+			write_sysreg_s(va, SYS_VNCR_EL2);
 
-write:
-	write_sysreg(val, cpacr_el1);
-}
-
-static void __deactivate_cptr_traps(struct kvm_vcpu *vcpu)
-{
-	u64 val = CPACR_EL1_FPEN | CPACR_EL1_ZEN_EL1EN;
+			/* Force NV2 in case the guest is forgetful... */
+			guest_hcr |= HCR_NV2;
+		}
+	}
 
-	if (cpus_have_final_cap(ARM64_SME))
-		val |= CPACR_EL1_SMEN_EL1EN;
+	BUG_ON(host_data_test_flag(VCPU_IN_HYP_CONTEXT) &&
+	       host_data_test_flag(L1_VNCR_MAPPED));
 
-	write_sysreg(val, cpacr_el1);
+	return hcr | (guest_hcr & ~NV_HCR_GUEST_EXCLUDE);
 }
 
 static void __activate_traps(struct kvm_vcpu *vcpu)
@@ -184,7 +128,7 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 
 	___deactivate_traps(vcpu);
 
-	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
 
 	if (has_cntpoff()) {
 		struct timer_map map;
@@ -198,9 +142,9 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 		 */
 		val = read_sysreg_el0(SYS_CNTP_CVAL);
 		if (map.direct_ptimer == vcpu_ptimer(vcpu))
-			__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = val;
+			__vcpu_assign_sys_reg(vcpu, CNTP_CVAL_EL0, val);
 		if (map.direct_ptimer == vcpu_hptimer(vcpu))
-			__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = val;
+			__vcpu_assign_sys_reg(vcpu, CNTHP_CVAL_EL2, val);
 
 		offset = read_sysreg_s(SYS_CNTPOFF_EL2);
 
@@ -459,6 +403,14 @@ static bool kvm_hyp_handle_tlbi_el2(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (ret)
 		return false;
 
+	/*
+	 * If we have to check for any VNCR mapping being invalidated,
+	 * go back to the slow path for further processing.
+	 */
+	if (vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu) &&
+	    atomic_read(&vcpu->kvm->arch.vncr_map_count))
+		return false;
+
 	__kvm_skip_instr(vcpu);
 
 	return true;
@@ -568,9 +520,12 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 
 	/*
 	 * If we were in HYP context on entry, adjust the PSTATE view
-	 * so that the usual helpers work correctly.
+	 * so that the usual helpers work correctly. This enforces our
+	 * invariant that the guest's HYP context status is preserved
+	 * across a run.
 	 */
-	if (vcpu_has_nv(vcpu) && (read_sysreg(hcr_el2) & HCR_NV)) {
+	if (vcpu_has_nv(vcpu) &&
+	    unlikely(host_data_test_flag(VCPU_IN_HYP_CONTEXT))) {
 		u64 mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
 
 		switch (mode) {
@@ -586,6 +541,10 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 		*vcpu_cpsr(vcpu) |= mode;
 	}
 
+	/* Apply extreme paranoia! */
+	BUG_ON(vcpu_has_nv(vcpu) &&
+	       !!host_data_test_flag(VCPU_IN_HYP_CONTEXT) != is_hyp_ctxt(vcpu));
+
 	return __fixup_guest_exit(vcpu, exit_code, hyp_exit_handlers);
 }
 
@@ -599,10 +558,10 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 
-	sysreg_save_host_state_vhe(host_ctxt);
-
 	fpsimd_lazy_switch_to_guest(vcpu);
 
+	sysreg_save_host_state_vhe(host_ctxt);
+
 	/*
 	 * Note that ARM erratum 1165522 requires us to configure both stage 1
 	 * and stage 2 translation for the guest context before we clear
@@ -627,15 +586,23 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 
 	__deactivate_traps(vcpu);
 
-	fpsimd_lazy_switch_to_host(vcpu);
-
 	sysreg_restore_host_state_vhe(host_ctxt);
 
+	__debug_switch_to_host(vcpu);
+
+	/*
+	 * Ensure that all system register writes above have taken effect
+	 * before returning to the host. In VHE mode, CPTR traps for
+	 * FPSIMD/SVE/SME also apply to EL2, so FPSIMD/SVE/SME state must be
+	 * manipulated after the ISB.
+	 */
+	isb();
+
+	fpsimd_lazy_switch_to_host(vcpu);
+
 	if (guest_owns_fp_regs())
 		__fpsimd_save_fpexc32(vcpu);
 
-	__debug_switch_to_host(vcpu);
-
 	return exit_code;
 }
 NOKPROBE_SYMBOL(__kvm_vcpu_run_vhe);
@@ -665,12 +632,6 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	local_daif_restore(DAIF_PROCCTX_NOIRQ);
 
-	/*
-	 * When we exit from the guest we change a number of CPU configuration
-	 * parameters, such as traps.  We rely on the isb() in kvm_call_hyp*()
-	 * to make sure these changes take effect before running the host or
-	 * additional guests.
-	 */
 	return ret;
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/sysreg-sr.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
index 3814b0b2c937..73e4bc7fde9e 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
@@ -18,17 +18,17 @@
 static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 {
 	/* These registers are common with EL1 */
-	__vcpu_sys_reg(vcpu, PAR_EL1)	= read_sysreg(par_el1);
-	__vcpu_sys_reg(vcpu, TPIDR_EL1)	= read_sysreg(tpidr_el1);
-
-	__vcpu_sys_reg(vcpu, ESR_EL2)	= read_sysreg_el1(SYS_ESR);
-	__vcpu_sys_reg(vcpu, AFSR0_EL2)	= read_sysreg_el1(SYS_AFSR0);
-	__vcpu_sys_reg(vcpu, AFSR1_EL2)	= read_sysreg_el1(SYS_AFSR1);
-	__vcpu_sys_reg(vcpu, FAR_EL2)	= read_sysreg_el1(SYS_FAR);
-	__vcpu_sys_reg(vcpu, MAIR_EL2)	= read_sysreg_el1(SYS_MAIR);
-	__vcpu_sys_reg(vcpu, VBAR_EL2)	= read_sysreg_el1(SYS_VBAR);
-	__vcpu_sys_reg(vcpu, CONTEXTIDR_EL2) = read_sysreg_el1(SYS_CONTEXTIDR);
-	__vcpu_sys_reg(vcpu, AMAIR_EL2)	= read_sysreg_el1(SYS_AMAIR);
+	__vcpu_assign_sys_reg(vcpu, PAR_EL1,	 read_sysreg(par_el1));
+	__vcpu_assign_sys_reg(vcpu, TPIDR_EL1,	 read_sysreg(tpidr_el1));
+
+	__vcpu_assign_sys_reg(vcpu, ESR_EL2,	 read_sysreg_el1(SYS_ESR));
+	__vcpu_assign_sys_reg(vcpu, AFSR0_EL2,	 read_sysreg_el1(SYS_AFSR0));
+	__vcpu_assign_sys_reg(vcpu, AFSR1_EL2,	 read_sysreg_el1(SYS_AFSR1));
+	__vcpu_assign_sys_reg(vcpu, FAR_EL2,	 read_sysreg_el1(SYS_FAR));
+	__vcpu_assign_sys_reg(vcpu, MAIR_EL2,	 read_sysreg_el1(SYS_MAIR));
+	__vcpu_assign_sys_reg(vcpu, VBAR_EL2,	 read_sysreg_el1(SYS_VBAR));
+	__vcpu_assign_sys_reg(vcpu, CONTEXTIDR_EL2, read_sysreg_el1(SYS_CONTEXTIDR));
+	__vcpu_assign_sys_reg(vcpu, AMAIR_EL2,	 read_sysreg_el1(SYS_AMAIR));
 
 	/*
 	 * In VHE mode those registers are compatible between EL1 and EL2,
@@ -46,21 +46,21 @@ static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 		 * are always trapped, ensuring that the in-memory
 		 * copy is always up-to-date. A small blessing...
 		 */
-		__vcpu_sys_reg(vcpu, SCTLR_EL2)	= read_sysreg_el1(SYS_SCTLR);
-		__vcpu_sys_reg(vcpu, TTBR0_EL2)	= read_sysreg_el1(SYS_TTBR0);
-		__vcpu_sys_reg(vcpu, TTBR1_EL2)	= read_sysreg_el1(SYS_TTBR1);
-		__vcpu_sys_reg(vcpu, TCR_EL2)	= read_sysreg_el1(SYS_TCR);
+		__vcpu_assign_sys_reg(vcpu, SCTLR_EL2,	 read_sysreg_el1(SYS_SCTLR));
+		__vcpu_assign_sys_reg(vcpu, TTBR0_EL2,	 read_sysreg_el1(SYS_TTBR0));
+		__vcpu_assign_sys_reg(vcpu, TTBR1_EL2,	 read_sysreg_el1(SYS_TTBR1));
+		__vcpu_assign_sys_reg(vcpu, TCR_EL2,	 read_sysreg_el1(SYS_TCR));
 
 		if (ctxt_has_tcrx(&vcpu->arch.ctxt)) {
-			__vcpu_sys_reg(vcpu, TCR2_EL2) = read_sysreg_el1(SYS_TCR2);
+			__vcpu_assign_sys_reg(vcpu, TCR2_EL2, read_sysreg_el1(SYS_TCR2));
 
 			if (ctxt_has_s1pie(&vcpu->arch.ctxt)) {
-				__vcpu_sys_reg(vcpu, PIRE0_EL2) = read_sysreg_el1(SYS_PIRE0);
-				__vcpu_sys_reg(vcpu, PIR_EL2) = read_sysreg_el1(SYS_PIR);
+				__vcpu_assign_sys_reg(vcpu, PIRE0_EL2, read_sysreg_el1(SYS_PIRE0));
+				__vcpu_assign_sys_reg(vcpu, PIR_EL2, read_sysreg_el1(SYS_PIR));
 			}
 
 			if (ctxt_has_s1poe(&vcpu->arch.ctxt))
-				__vcpu_sys_reg(vcpu, POR_EL2) = read_sysreg_el1(SYS_POR);
+				__vcpu_assign_sys_reg(vcpu, POR_EL2, read_sysreg_el1(SYS_POR));
 		}
 
 		/*
@@ -70,13 +70,13 @@ static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 		 */
 		val = read_sysreg_el1(SYS_CNTKCTL);
 		val &= CNTKCTL_VALID_BITS;
-		__vcpu_sys_reg(vcpu, CNTHCTL_EL2) &= ~CNTKCTL_VALID_BITS;
-		__vcpu_sys_reg(vcpu, CNTHCTL_EL2) |= val;
+		__vcpu_rmw_sys_reg(vcpu, CNTHCTL_EL2, &=, ~CNTKCTL_VALID_BITS);
+		__vcpu_rmw_sys_reg(vcpu, CNTHCTL_EL2, |=, val);
 	}
 
-	__vcpu_sys_reg(vcpu, SP_EL2)	= read_sysreg(sp_el1);
-	__vcpu_sys_reg(vcpu, ELR_EL2)	= read_sysreg_el1(SYS_ELR);
-	__vcpu_sys_reg(vcpu, SPSR_EL2)	= read_sysreg_el1(SYS_SPSR);
+	__vcpu_assign_sys_reg(vcpu, SP_EL2,	 read_sysreg(sp_el1));
+	__vcpu_assign_sys_reg(vcpu, ELR_EL2,	 read_sysreg_el1(SYS_ELR));
+	__vcpu_assign_sys_reg(vcpu, SPSR_EL2,	 read_sysreg_el1(SYS_SPSR));
 }
 
 static void __sysreg_restore_vel2_state(struct kvm_vcpu *vcpu)
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/tlb.c linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
index 3d50a1bd2bdb..ec2569818629 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -63,7 +63,7 @@ static void enter_vmid_context(struct kvm_s2_mmu *mmu,
 	__load_stage2(mmu, mmu->arch);
 	val = read_sysreg(hcr_el2);
 	val &= ~HCR_TGE;
-	write_sysreg(val, hcr_el2);
+	write_sysreg_hcr(val);
 	isb();
 }
 
@@ -73,7 +73,7 @@ static void exit_vmid_context(struct tlb_inv_context *cxt)
 	 * We're done with the TLB operation, let's restore the host's
 	 * view of HCR_EL2.
 	 */
-	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
 	isb();
 
 	/* ... and the stage-2 MMU context that we switched away from */
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/hypercalls.c linux-libre-6.16-gnu/arch/arm64/kvm/hypercalls.c
index 569941eeb3fe..58c5fe7d7572 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/hypercalls.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/hypercalls.c
@@ -270,6 +270,7 @@ int kvm_smccc_call_handler(struct kvm_vcpu *vcpu)
 	u32 feature;
 	u8 action;
 	gpa_t gpa;
+	uuid_t uuid;
 
 	action = kvm_smccc_get_action(vcpu, func_id);
 	switch (action) {
@@ -355,10 +356,11 @@ int kvm_smccc_call_handler(struct kvm_vcpu *vcpu)
 			val[0] = gpa;
 		break;
 	case ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID:
-		val[0] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_0;
-		val[1] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_1;
-		val[2] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_2;
-		val[3] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_3;
+		uuid = ARM_SMCCC_VENDOR_HYP_UID_KVM;
+		val[0] = smccc_uuid_to_reg(&uuid, 0);
+		val[1] = smccc_uuid_to_reg(&uuid, 1);
+		val[2] = smccc_uuid_to_reg(&uuid, 2);
+		val[3] = smccc_uuid_to_reg(&uuid, 3);
 		break;
 	case ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID:
 		val[0] = smccc_feat->vendor_hyp_bmap;
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/mmu.c linux-libre-6.16-gnu/arch/arm64/kvm/mmu.c
index eeda92330ade..2942ec92c5a4 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/mmu.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/mmu.c
@@ -1304,6 +1304,10 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
 	if (map_size == PAGE_SIZE)
 		return true;
 
+	/* pKVM only supports PMD_SIZE huge-mappings */
+	if (is_protected_kvm_enabled() && map_size != PMD_SIZE)
+		return false;
+
 	size = memslot->npages * PAGE_SIZE;
 
 	gpa_start = memslot->base_gfn << PAGE_SHIFT;
@@ -1540,7 +1544,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * logging_active is guaranteed to never be true for VM_PFNMAP
 	 * memslots.
 	 */
-	if (logging_active || is_protected_kvm_enabled()) {
+	if (logging_active) {
 		force_pte = true;
 		vma_shift = PAGE_SHIFT;
 	} else {
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/nested.c linux-libre-6.16-gnu/arch/arm64/kvm/nested.c
index 4a3fc11f7ecf..dc1d26559bfa 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/nested.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/nested.c
@@ -8,6 +8,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
+#include <asm/fixmap.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_mmu.h>
@@ -16,6 +17,24 @@
 
 #include "sys_regs.h"
 
+struct vncr_tlb {
+	/* The guest's VNCR_EL2 */
+	u64			gva;
+	struct s1_walk_info	wi;
+	struct s1_walk_result	wr;
+
+	u64			hpa;
+
+	/* -1 when not mapped on a CPU */
+	int			cpu;
+
+	/*
+	 * true if the TLB is valid. Can only be changed with the
+	 * mmu_lock held.
+	 */
+	bool			valid;
+};
+
 /*
  * Ratio of live shadow S2 MMU per vcpu. This is a trade-off between
  * memory usage and potential number of different sets of S2 PTs in
@@ -28,6 +47,7 @@ void kvm_init_nested(struct kvm *kvm)
 {
 	kvm->arch.nested_mmus = NULL;
 	kvm->arch.nested_mmus_size = 0;
+	atomic_set(&kvm->arch.vncr_map_count, 0);
 }
 
 static int init_nested_s2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu)
@@ -55,6 +75,13 @@ int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu)
 	    !cpus_have_final_cap(ARM64_HAS_HCR_NV1))
 		return -EINVAL;
 
+	if (!vcpu->arch.ctxt.vncr_array)
+		vcpu->arch.ctxt.vncr_array = (u64 *)__get_free_page(GFP_KERNEL_ACCOUNT |
+								    __GFP_ZERO);
+
+	if (!vcpu->arch.ctxt.vncr_array)
+		return -ENOMEM;
+
 	/*
 	 * Let's treat memory allocation failures as benign: If we fail to
 	 * allocate anything, return an error and keep the allocated array
@@ -85,6 +112,9 @@ int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu)
 		for (int i = kvm->arch.nested_mmus_size; i < num_mmus; i++)
 			kvm_free_stage2_pgd(&kvm->arch.nested_mmus[i]);
 
+		free_page((unsigned long)vcpu->arch.ctxt.vncr_array);
+		vcpu->arch.ctxt.vncr_array = NULL;
+
 		return ret;
 	}
 
@@ -405,6 +435,30 @@ static unsigned int ttl_to_size(u8 ttl)
 	return max_size;
 }
 
+static u8 pgshift_level_to_ttl(u16 shift, u8 level)
+{
+	u8 ttl;
+
+	switch(shift) {
+	case 12:
+		ttl = TLBI_TTL_TG_4K;
+		break;
+	case 14:
+		ttl = TLBI_TTL_TG_16K;
+		break;
+	case 16:
+		ttl = TLBI_TTL_TG_64K;
+		break;
+	default:
+		BUG();
+	}
+
+	ttl <<= 2;
+	ttl |= level & 3;
+
+	return ttl;
+}
+
 /*
  * Compute the equivalent of the TTL field by parsing the shadow PT.  The
  * granule size is extracted from the cached VTCR_EL2.TG0 while the level is
@@ -676,23 +730,36 @@ void kvm_init_nested_s2_mmu(struct kvm_s2_mmu *mmu)
 void kvm_vcpu_load_hw_mmu(struct kvm_vcpu *vcpu)
 {
 	/*
-	 * The vCPU kept its reference on the MMU after the last put, keep
-	 * rolling with it.
+	 * If the vCPU kept its reference on the MMU after the last put,
+	 * keep rolling with it.
 	 */
-	if (vcpu->arch.hw_mmu)
-		return;
-
 	if (is_hyp_ctxt(vcpu)) {
-		vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
+		if (!vcpu->arch.hw_mmu)
+			vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
 	} else {
-		write_lock(&vcpu->kvm->mmu_lock);
-		vcpu->arch.hw_mmu = get_s2_mmu_nested(vcpu);
-		write_unlock(&vcpu->kvm->mmu_lock);
+		if (!vcpu->arch.hw_mmu) {
+			scoped_guard(write_lock, &vcpu->kvm->mmu_lock)
+				vcpu->arch.hw_mmu = get_s2_mmu_nested(vcpu);
+		}
+
+		if (__vcpu_sys_reg(vcpu, HCR_EL2) & HCR_NV)
+			kvm_make_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu);
 	}
 }
 
 void kvm_vcpu_put_hw_mmu(struct kvm_vcpu *vcpu)
 {
+	/* Unconditionally drop the VNCR mapping if we have one */
+	if (host_data_test_flag(L1_VNCR_MAPPED)) {
+		BUG_ON(vcpu->arch.vncr_tlb->cpu != smp_processor_id());
+		BUG_ON(is_hyp_ctxt(vcpu));
+
+		clear_fixmap(vncr_fixmap(vcpu->arch.vncr_tlb->cpu));
+		vcpu->arch.vncr_tlb->cpu = -1;
+		host_data_clear_flag(L1_VNCR_MAPPED);
+		atomic_dec(&vcpu->kvm->arch.vncr_map_count);
+	}
+
 	/*
 	 * Keep a reference on the associated stage-2 MMU if the vCPU is
 	 * scheduling out and not in WFI emulation, suggesting it is likely to
@@ -743,6 +810,247 @@ int kvm_inject_s2_fault(struct kvm_vcpu *vcpu, u64 esr_el2)
 	return kvm_inject_nested_sync(vcpu, esr_el2);
 }
 
+static void invalidate_vncr(struct vncr_tlb *vt)
+{
+	vt->valid = false;
+	if (vt->cpu != -1)
+		clear_fixmap(vncr_fixmap(vt->cpu));
+}
+
+static void kvm_invalidate_vncr_ipa(struct kvm *kvm, u64 start, u64 end)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+		u64 ipa_start, ipa_end, ipa_size;
+
+		/*
+		 * Careful here: We end-up here from an MMU notifier,
+		 * and this can race against a vcpu not being onlined
+		 * yet, without the pseudo-TLB being allocated.
+		 *
+		 * Skip those, as they obviously don't participate in
+		 * the invalidation at this stage.
+		 */
+		if (!vt)
+			continue;
+
+		if (!vt->valid)
+			continue;
+
+		ipa_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
+							    vt->wr.level));
+		ipa_start = vt->wr.pa & (ipa_size - 1);
+		ipa_end = ipa_start + ipa_size;
+
+		if (ipa_end <= start || ipa_start >= end)
+			continue;
+
+		invalidate_vncr(vt);
+	}
+}
+
+struct s1e2_tlbi_scope {
+	enum {
+		TLBI_ALL,
+		TLBI_VA,
+		TLBI_VAA,
+		TLBI_ASID,
+	} type;
+
+	u16 asid;
+	u64 va;
+	u64 size;
+};
+
+static void invalidate_vncr_va(struct kvm *kvm,
+			       struct s1e2_tlbi_scope *scope)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+		u64 va_start, va_end, va_size;
+
+		if (!vt->valid)
+			continue;
+
+		va_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
+							   vt->wr.level));
+		va_start = vt->gva & (va_size - 1);
+		va_end = va_start + va_size;
+
+		switch (scope->type) {
+		case TLBI_ALL:
+			break;
+
+		case TLBI_VA:
+			if (va_end <= scope->va ||
+			    va_start >= (scope->va + scope->size))
+				continue;
+			if (vt->wr.nG && vt->wr.asid != scope->asid)
+				continue;
+			break;
+
+		case TLBI_VAA:
+			if (va_end <= scope->va ||
+			    va_start >= (scope->va + scope->size))
+				continue;
+			break;
+
+		case TLBI_ASID:
+			if (!vt->wr.nG || vt->wr.asid != scope->asid)
+				continue;
+			break;
+		}
+
+		invalidate_vncr(vt);
+	}
+}
+
+#define tlbi_va_s1_to_va(v)	(u64)sign_extend64((v) << 12, 48)
+
+static void compute_s1_tlbi_range(struct kvm_vcpu *vcpu, u32 inst, u64 val,
+				  struct s1e2_tlbi_scope *scope)
+{
+	switch (inst) {
+	case OP_TLBI_ALLE2:
+	case OP_TLBI_ALLE2IS:
+	case OP_TLBI_ALLE2OS:
+	case OP_TLBI_VMALLE1:
+	case OP_TLBI_VMALLE1IS:
+	case OP_TLBI_VMALLE1OS:
+	case OP_TLBI_ALLE2NXS:
+	case OP_TLBI_ALLE2ISNXS:
+	case OP_TLBI_ALLE2OSNXS:
+	case OP_TLBI_VMALLE1NXS:
+	case OP_TLBI_VMALLE1ISNXS:
+	case OP_TLBI_VMALLE1OSNXS:
+		scope->type = TLBI_ALL;
+		break;
+	case OP_TLBI_VAE2:
+	case OP_TLBI_VAE2IS:
+	case OP_TLBI_VAE2OS:
+	case OP_TLBI_VAE1:
+	case OP_TLBI_VAE1IS:
+	case OP_TLBI_VAE1OS:
+	case OP_TLBI_VAE2NXS:
+	case OP_TLBI_VAE2ISNXS:
+	case OP_TLBI_VAE2OSNXS:
+	case OP_TLBI_VAE1NXS:
+	case OP_TLBI_VAE1ISNXS:
+	case OP_TLBI_VAE1OSNXS:
+	case OP_TLBI_VALE2:
+	case OP_TLBI_VALE2IS:
+	case OP_TLBI_VALE2OS:
+	case OP_TLBI_VALE1:
+	case OP_TLBI_VALE1IS:
+	case OP_TLBI_VALE1OS:
+	case OP_TLBI_VALE2NXS:
+	case OP_TLBI_VALE2ISNXS:
+	case OP_TLBI_VALE2OSNXS:
+	case OP_TLBI_VALE1NXS:
+	case OP_TLBI_VALE1ISNXS:
+	case OP_TLBI_VALE1OSNXS:
+		scope->type = TLBI_VA;
+		scope->size = ttl_to_size(FIELD_GET(TLBI_TTL_MASK, val));
+		if (!scope->size)
+			scope->size = SZ_1G;
+		scope->va = tlbi_va_s1_to_va(val) & ~(scope->size - 1);
+		scope->asid = FIELD_GET(TLBIR_ASID_MASK, val);
+		break;
+	case OP_TLBI_ASIDE1:
+	case OP_TLBI_ASIDE1IS:
+	case OP_TLBI_ASIDE1OS:
+	case OP_TLBI_ASIDE1NXS:
+	case OP_TLBI_ASIDE1ISNXS:
+	case OP_TLBI_ASIDE1OSNXS:
+		scope->type = TLBI_ASID;
+		scope->asid = FIELD_GET(TLBIR_ASID_MASK, val);
+		break;
+	case OP_TLBI_VAAE1:
+	case OP_TLBI_VAAE1IS:
+	case OP_TLBI_VAAE1OS:
+	case OP_TLBI_VAAE1NXS:
+	case OP_TLBI_VAAE1ISNXS:
+	case OP_TLBI_VAAE1OSNXS:
+	case OP_TLBI_VAALE1:
+	case OP_TLBI_VAALE1IS:
+	case OP_TLBI_VAALE1OS:
+	case OP_TLBI_VAALE1NXS:
+	case OP_TLBI_VAALE1ISNXS:
+	case OP_TLBI_VAALE1OSNXS:
+		scope->type = TLBI_VAA;
+		scope->size = ttl_to_size(FIELD_GET(TLBI_TTL_MASK, val));
+		if (!scope->size)
+			scope->size = SZ_1G;
+		scope->va = tlbi_va_s1_to_va(val) & ~(scope->size - 1);
+		break;
+	case OP_TLBI_RVAE2:
+	case OP_TLBI_RVAE2IS:
+	case OP_TLBI_RVAE2OS:
+	case OP_TLBI_RVAE1:
+	case OP_TLBI_RVAE1IS:
+	case OP_TLBI_RVAE1OS:
+	case OP_TLBI_RVAE2NXS:
+	case OP_TLBI_RVAE2ISNXS:
+	case OP_TLBI_RVAE2OSNXS:
+	case OP_TLBI_RVAE1NXS:
+	case OP_TLBI_RVAE1ISNXS:
+	case OP_TLBI_RVAE1OSNXS:
+	case OP_TLBI_RVALE2:
+	case OP_TLBI_RVALE2IS:
+	case OP_TLBI_RVALE2OS:
+	case OP_TLBI_RVALE1:
+	case OP_TLBI_RVALE1IS:
+	case OP_TLBI_RVALE1OS:
+	case OP_TLBI_RVALE2NXS:
+	case OP_TLBI_RVALE2ISNXS:
+	case OP_TLBI_RVALE2OSNXS:
+	case OP_TLBI_RVALE1NXS:
+	case OP_TLBI_RVALE1ISNXS:
+	case OP_TLBI_RVALE1OSNXS:
+		scope->type = TLBI_VA;
+		scope->va = decode_range_tlbi(val, &scope->size, &scope->asid);
+		break;
+	case OP_TLBI_RVAAE1:
+	case OP_TLBI_RVAAE1IS:
+	case OP_TLBI_RVAAE1OS:
+	case OP_TLBI_RVAAE1NXS:
+	case OP_TLBI_RVAAE1ISNXS:
+	case OP_TLBI_RVAAE1OSNXS:
+	case OP_TLBI_RVAALE1:
+	case OP_TLBI_RVAALE1IS:
+	case OP_TLBI_RVAALE1OS:
+	case OP_TLBI_RVAALE1NXS:
+	case OP_TLBI_RVAALE1ISNXS:
+	case OP_TLBI_RVAALE1OSNXS:
+		scope->type = TLBI_VAA;
+		scope->va = decode_range_tlbi(val, &scope->size, NULL);
+		break;
+	}
+}
+
+void kvm_handle_s1e2_tlbi(struct kvm_vcpu *vcpu, u32 inst, u64 val)
+{
+	struct s1e2_tlbi_scope scope = {};
+
+	compute_s1_tlbi_range(vcpu, inst, val, &scope);
+
+	guard(write_lock)(&vcpu->kvm->mmu_lock);
+	invalidate_vncr_va(vcpu->kvm, &scope);
+}
+
 void kvm_nested_s2_wp(struct kvm *kvm)
 {
 	int i;
@@ -755,6 +1063,8 @@ void kvm_nested_s2_wp(struct kvm *kvm)
 		if (kvm_s2_mmu_valid(mmu))
 			kvm_stage2_wp_range(mmu, 0, kvm_phys_size(mmu));
 	}
+
+	kvm_invalidate_vncr_ipa(kvm, 0, BIT(kvm->arch.mmu.pgt->ia_bits));
 }
 
 void kvm_nested_s2_unmap(struct kvm *kvm, bool may_block)
@@ -769,6 +1079,8 @@ void kvm_nested_s2_unmap(struct kvm *kvm, bool may_block)
 		if (kvm_s2_mmu_valid(mmu))
 			kvm_stage2_unmap_range(mmu, 0, kvm_phys_size(mmu), may_block);
 	}
+
+	kvm_invalidate_vncr_ipa(kvm, 0, BIT(kvm->arch.mmu.pgt->ia_bits));
 }
 
 void kvm_nested_s2_flush(struct kvm *kvm)
@@ -801,6 +1113,310 @@ void kvm_arch_flush_shadow_all(struct kvm *kvm)
 	kvm_uninit_stage2_mmu(kvm);
 }
 
+/*
+ * Dealing with VNCR_EL2 exposed by the *guest* is a complicated matter:
+ *
+ * - We introduce an internal representation of a vcpu-private TLB,
+ *   representing the mapping between the guest VA contained in VNCR_EL2,
+ *   the IPA the guest's EL2 PTs point to, and the actual PA this lives at.
+ *
+ * - On translation fault from a nested VNCR access, we create such a TLB.
+ *   If there is no mapping to describe, the guest inherits the fault.
+ *   Crucially, no actual mapping is done at this stage.
+ *
+ * - On vcpu_load() in a non-HYP context with HCR_EL2.NV==1, if the above
+ *   TLB exists, we map it in the fixmap for this CPU, and run with it. We
+ *   have to respect the permissions dictated by the guest, but not the
+ *   memory type (FWB is a must).
+ *
+ * - Note that we usually don't do a vcpu_load() on the back of a fault
+ *   (unless we are preempted), so the resolution of a translation fault
+ *   must go via a request that will map the VNCR page in the fixmap.
+ *   vcpu_load() might as well use the same mechanism.
+ *
+ * - On vcpu_put() in a non-HYP context with HCR_EL2.NV==1, if the TLB was
+ *   mapped, we unmap it. Yes it is that simple. The TLB still exists
+ *   though, and may be reused at a later load.
+ *
+ * - On permission fault, we simply forward the fault to the guest's EL2.
+ *   Get out of my way.
+ *
+ * - On any TLBI for the EL2&0 translation regime, we must find any TLB that
+ *   intersects with the TLBI request, invalidate it, and unmap the page
+ *   from the fixmap. Because we need to look at all the vcpu-private TLBs,
+ *   this requires some wide-ranging locking to ensure that nothing races
+ *   against it. This may require some refcounting to avoid the search when
+ *   no such TLB is present.
+ *
+ * - On MMU notifiers, we must invalidate our TLB in a similar way, but
+ *   looking at the IPA instead. The funny part is that there may not be a
+ *   stage-2 mapping for this page if L1 hasn't accessed it using LD/ST
+ *   instructions.
+ */
+
+int kvm_vcpu_allocate_vncr_tlb(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return 0;
+
+	vcpu->arch.vncr_tlb = kzalloc(sizeof(*vcpu->arch.vncr_tlb),
+				      GFP_KERNEL_ACCOUNT);
+	if (!vcpu->arch.vncr_tlb)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static u64 read_vncr_el2(struct kvm_vcpu *vcpu)
+{
+	return (u64)sign_extend64(__vcpu_sys_reg(vcpu, VNCR_EL2), 48);
+}
+
+static int kvm_translate_vncr(struct kvm_vcpu *vcpu)
+{
+	bool write_fault, writable;
+	unsigned long mmu_seq;
+	struct vncr_tlb *vt;
+	struct page *page;
+	u64 va, pfn, gfn;
+	int ret;
+
+	vt = vcpu->arch.vncr_tlb;
+
+	/*
+	 * If we're about to walk the EL2 S1 PTs, we must invalidate the
+	 * current TLB, as it could be sampled from another vcpu doing a
+	 * TLBI *IS. A real CPU wouldn't do that, but we only keep a single
+	 * translation, so not much of a choice.
+	 *
+	 * We also prepare the next walk wilst we're at it.
+	 */
+	scoped_guard(write_lock, &vcpu->kvm->mmu_lock) {
+		invalidate_vncr(vt);
+
+		vt->wi = (struct s1_walk_info) {
+			.regime	= TR_EL20,
+			.as_el0	= false,
+			.pan	= false,
+		};
+		vt->wr = (struct s1_walk_result){};
+	}
+
+	guard(srcu)(&vcpu->kvm->srcu);
+
+	va =  read_vncr_el2(vcpu);
+
+	ret = __kvm_translate_va(vcpu, &vt->wi, &vt->wr, va);
+	if (ret)
+		return ret;
+
+	write_fault = kvm_is_write_fault(vcpu);
+
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	smp_rmb();
+
+	gfn = vt->wr.pa >> PAGE_SHIFT;
+	pfn = kvm_faultin_pfn(vcpu, gfn, write_fault, &writable, &page);
+	if (is_error_noslot_pfn(pfn) || (write_fault && !writable))
+		return -EFAULT;
+
+	scoped_guard(write_lock, &vcpu->kvm->mmu_lock) {
+		if (mmu_invalidate_retry(vcpu->kvm, mmu_seq))
+			return -EAGAIN;
+
+		vt->gva = va;
+		vt->hpa = pfn << PAGE_SHIFT;
+		vt->valid = true;
+		vt->cpu = -1;
+
+		kvm_make_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu);
+		kvm_release_faultin_page(vcpu->kvm, page, false, vt->wr.pw);
+	}
+
+	if (vt->wr.pw)
+		mark_page_dirty(vcpu->kvm, gfn);
+
+	return 0;
+}
+
+static void inject_vncr_perm(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	/* Adjust the fault level to reflect that of the guest's */
+	esr &= ~ESR_ELx_FSC;
+	esr |= FIELD_PREP(ESR_ELx_FSC,
+			  ESR_ELx_FSC_PERM_L(vt->wr.level));
+
+	kvm_inject_nested_sync(vcpu, esr);
+}
+
+static bool kvm_vncr_tlb_lookup(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+
+	lockdep_assert_held_read(&vcpu->kvm->mmu_lock);
+
+	if (!vt->valid)
+		return false;
+
+	if (read_vncr_el2(vcpu) != vt->gva)
+		return false;
+
+	if (vt->wr.nG) {
+		u64 tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+		u64 ttbr = ((tcr & TCR_A1) ?
+			    vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+			    vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+		u16 asid;
+
+		asid = FIELD_GET(TTBR_ASID_MASK, ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			asid &= GENMASK(7, 0);
+
+		return asid != vt->wr.asid;
+	}
+
+	return true;
+}
+
+int kvm_handle_vncr_abort(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	BUG_ON(!(esr & ESR_ELx_VNCR_SHIFT));
+
+	if (esr_fsc_is_permission_fault(esr)) {
+		inject_vncr_perm(vcpu);
+	} else if (esr_fsc_is_translation_fault(esr)) {
+		bool valid;
+		int ret;
+
+		scoped_guard(read_lock, &vcpu->kvm->mmu_lock)
+			valid = kvm_vncr_tlb_lookup(vcpu);
+
+		if (!valid)
+			ret = kvm_translate_vncr(vcpu);
+		else
+			ret = -EPERM;
+
+		switch (ret) {
+		case -EAGAIN:
+		case -ENOMEM:
+			/* Let's try again... */
+			break;
+		case -EFAULT:
+		case -EINVAL:
+		case -ENOENT:
+		case -EACCES:
+			/*
+			 * Translation failed, inject the corresponding
+			 * exception back to EL2.
+			 */
+			BUG_ON(!vt->wr.failed);
+
+			esr &= ~ESR_ELx_FSC;
+			esr |= FIELD_PREP(ESR_ELx_FSC, vt->wr.fst);
+
+			kvm_inject_nested_sync(vcpu, esr);
+			break;
+		case -EPERM:
+			/* Hack to deal with POE until we get kernel support */
+			inject_vncr_perm(vcpu);
+			break;
+		case 0:
+			break;
+		}
+	} else {
+		WARN_ONCE(1, "Unhandled VNCR abort, ESR=%llx\n", esr);
+	}
+
+	return 1;
+}
+
+static void kvm_map_l1_vncr(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	pgprot_t prot;
+
+	guard(preempt)();
+	guard(read_lock)(&vcpu->kvm->mmu_lock);
+
+	/*
+	 * The request to map VNCR may have raced against some other
+	 * event, such as an interrupt, and may not be valid anymore.
+	 */
+	if (is_hyp_ctxt(vcpu))
+		return;
+
+	/*
+	 * Check that the pseudo-TLB is valid and that VNCR_EL2 still
+	 * contains the expected value. If it doesn't, we simply bail out
+	 * without a mapping -- a transformed MSR/MRS will generate the
+	 * fault and allows us to populate the pseudo-TLB.
+	 */
+	if (!vt->valid)
+		return;
+
+	if (read_vncr_el2(vcpu) != vt->gva)
+		return;
+
+	if (vt->wr.nG) {
+		u64 tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+		u64 ttbr = ((tcr & TCR_A1) ?
+			    vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+			    vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+		u16 asid;
+
+		asid = FIELD_GET(TTBR_ASID_MASK, ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			asid &= GENMASK(7, 0);
+
+		if (asid != vt->wr.asid)
+			return;
+	}
+
+	vt->cpu = smp_processor_id();
+
+	if (vt->wr.pw && vt->wr.pr)
+		prot = PAGE_KERNEL;
+	else if (vt->wr.pr)
+		prot = PAGE_KERNEL_RO;
+	else
+		prot = PAGE_NONE;
+
+	/*
+	 * We can't map write-only (or no permission at all) in the kernel,
+	 * but the guest can do it if using POE, so we'll have to turn a
+	 * translation fault into a permission fault at runtime.
+	 * FIXME: WO doesn't work at all, need POE support in the kernel.
+	 */
+	if (pgprot_val(prot) != pgprot_val(PAGE_NONE)) {
+		__set_fixmap(vncr_fixmap(vt->cpu), vt->hpa, prot);
+		host_data_set_flag(L1_VNCR_MAPPED);
+		atomic_inc(&vcpu->kvm->arch.vncr_map_count);
+	}
+}
+
+#define has_tgran_2(__r, __sz)						\
+	({								\
+		u64 _s1, _s2, _mmfr0 = __r;				\
+									\
+		_s2 = SYS_FIELD_GET(ID_AA64MMFR0_EL1,			\
+				    TGRAN##__sz##_2, _mmfr0);		\
+									\
+		_s1 = SYS_FIELD_GET(ID_AA64MMFR0_EL1,			\
+				    TGRAN##__sz, _mmfr0);		\
+									\
+		((_s2 != ID_AA64MMFR0_EL1_TGRAN##__sz##_2_NI &&		\
+		  _s2 != ID_AA64MMFR0_EL1_TGRAN##__sz##_2_TGRAN##__sz) || \
+		 (_s2 == ID_AA64MMFR0_EL1_TGRAN##__sz##_2_TGRAN##__sz && \
+		  _s1 != ID_AA64MMFR0_EL1_TGRAN##__sz##_NI));		\
+	})
 /*
  * Our emulated CPU doesn't support all the possible features. For the
  * sake of simplicity (and probably mental sanity), wipe out a number
@@ -810,6 +1426,8 @@ void kvm_arch_flush_shadow_all(struct kvm *kvm)
  */
 u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)
 {
+	u64 orig_val = val;
+
 	switch (reg) {
 	case SYS_ID_AA64ISAR0_EL1:
 		/* Support everything but TME */
@@ -879,13 +1497,16 @@ u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)
 		 */
 		switch (PAGE_SIZE) {
 		case SZ_4K:
-			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN4_2, IMP);
+			if (has_tgran_2(orig_val, 4))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN4_2, IMP);
 			fallthrough;
 		case SZ_16K:
-			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN16_2, IMP);
+			if (has_tgran_2(orig_val, 16))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN16_2, IMP);
 			fallthrough;
 		case SZ_64K:
-			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN64_2, IMP);
+			if (has_tgran_2(orig_val, 64))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN64_2, IMP);
 			break;
 		}
 
@@ -1018,216 +1639,49 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu)
 	set_sysreg_masks(kvm, VMPIDR_EL2, res0, res1);
 
 	/* HCR_EL2 */
-	res0 = BIT(48);
-	res1 = HCR_RW;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, TWED, IMP))
-		res0 |= GENMASK(63, 59);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, MTE, MTE2))
-		res0 |= (HCR_TID5 | HCR_DCT | HCR_ATA);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, EVT, TTLBxS))
-		res0 |= (HCR_TTLBIS | HCR_TTLBOS);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, CSV2, CSV2_2) &&
-	    !kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2))
-		res0 |= HCR_ENSCXT;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, EVT, IMP))
-		res0 |= (HCR_TOCU | HCR_TICAB | HCR_TID4);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, V1P1))
-		res0 |= HCR_AMVOFFEN;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1))
-		res0 |= HCR_FIEN;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, FWB, IMP))
-		res0 |= HCR_FWB;
-	/* Implementation choice: NV2 is the only supported config */
-	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
-		res0 |= (HCR_NV2 | HCR_NV | HCR_AT);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, E2H0, NI))
-		res0 |= HCR_NV1;
-	if (!(kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_PTRAUTH_ADDRESS) &&
-	      kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_PTRAUTH_GENERIC)))
-		res0 |= (HCR_API | HCR_APK);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TME, IMP))
-		res0 |= BIT(39);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP))
-		res0 |= (HCR_TEA | HCR_TERR);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, LO, IMP))
-		res0 |= HCR_TLOR;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP))
-		res0 |= HCR_E2H;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, E2H0, IMP))
-		res1 |= HCR_E2H;
+	get_reg_fixed_bits(kvm, HCR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HCR_EL2, res0, res1);
 
 	/* HCRX_EL2 */
-	res0 = HCRX_EL2_RES0;
-	res1 = HCRX_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR3_EL1, PACM, TRIVIAL_IMP))
-		res0 |= HCRX_EL2_PACMEn;
-	if (!kvm_has_feat(kvm, ID_AA64PFR2_EL1, FPMR, IMP))
-		res0 |= HCRX_EL2_EnFPM;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= HCRX_EL2_GCSEn;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, SYSREG_128, IMP))
-		res0 |= HCRX_EL2_EnIDCP128;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ADERR, DEV_ASYNC))
-		res0 |= (HCRX_EL2_EnSDERR | HCRX_EL2_EnSNERR);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, DF2, IMP))
-		res0 |= HCRX_EL2_TMEA;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, D128, IMP))
-		res0 |= HCRX_EL2_D128En;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, THE, IMP))
-		res0 |= HCRX_EL2_PTTWI;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SCTLRX, IMP))
-		res0 |= HCRX_EL2_SCTLR2En;
-	if (!kvm_has_tcr2(kvm))
-		res0 |= HCRX_EL2_TCR2En;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, MOPS, IMP))
-		res0 |= (HCRX_EL2_MSCEn | HCRX_EL2_MCE2);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, CMOW, IMP))
-		res0 |= HCRX_EL2_CMOW;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, NMI, IMP))
-		res0 |= (HCRX_EL2_VFNMI | HCRX_EL2_VINMI | HCRX_EL2_TALLINT);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, SME, IMP) ||
-	    !(read_sysreg_s(SYS_SMIDR_EL1) & SMIDR_EL1_SMPS))
-		res0 |= HCRX_EL2_SMPME;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, XS, IMP))
-		res0 |= (HCRX_EL2_FGTnXS | HCRX_EL2_FnXS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_V))
-		res0 |= HCRX_EL2_EnASR;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64))
-		res0 |= HCRX_EL2_EnALS;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA))
-		res0 |= HCRX_EL2_EnAS0;
+	get_reg_fixed_bits(kvm, HCRX_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HCRX_EL2, res0, res1);
 
 	/* HFG[RW]TR_EL2 */
-	res0 = res1 = 0;
-	if (!(kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_PTRAUTH_ADDRESS) &&
-	      kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_PTRAUTH_GENERIC)))
-		res0 |= (HFGxTR_EL2_APDAKey | HFGxTR_EL2_APDBKey |
-			 HFGxTR_EL2_APGAKey | HFGxTR_EL2_APIAKey |
-			 HFGxTR_EL2_APIBKey);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, LO, IMP))
-		res0 |= (HFGxTR_EL2_LORC_EL1 | HFGxTR_EL2_LOREA_EL1 |
-			 HFGxTR_EL2_LORID_EL1 | HFGxTR_EL2_LORN_EL1 |
-			 HFGxTR_EL2_LORSA_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, CSV2, CSV2_2) &&
-	    !kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2))
-		res0 |= (HFGxTR_EL2_SCXTNUM_EL1 | HFGxTR_EL2_SCXTNUM_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, GIC, IMP))
-		res0 |= HFGxTR_EL2_ICC_IGRPENn_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP))
-		res0 |= (HFGxTR_EL2_ERRIDR_EL1 | HFGxTR_EL2_ERRSELR_EL1 |
-			 HFGxTR_EL2_ERXFR_EL1 | HFGxTR_EL2_ERXCTLR_EL1 |
-			 HFGxTR_EL2_ERXSTATUS_EL1 | HFGxTR_EL2_ERXMISCn_EL1 |
-			 HFGxTR_EL2_ERXPFGF_EL1 | HFGxTR_EL2_ERXPFGCTL_EL1 |
-			 HFGxTR_EL2_ERXPFGCDN_EL1 | HFGxTR_EL2_ERXADDR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA))
-		res0 |= HFGxTR_EL2_nACCDATA_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= (HFGxTR_EL2_nGCS_EL0 | HFGxTR_EL2_nGCS_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, SME, IMP))
-		res0 |= (HFGxTR_EL2_nSMPRI_EL1 | HFGxTR_EL2_nTPIDR2_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, THE, IMP))
-		res0 |= HFGxTR_EL2_nRCWMASK_EL1;
-	if (!kvm_has_s1pie(kvm))
-		res0 |= (HFGxTR_EL2_nPIRE0_EL1 | HFGxTR_EL2_nPIR_EL1);
-	if (!kvm_has_s1poe(kvm))
-		res0 |= (HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nPOR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
-		res0 |= HFGxTR_EL2_nS2POR_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, AIE, IMP))
-		res0 |= (HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nAMAIR2_EL1);
-	set_sysreg_masks(kvm, HFGRTR_EL2, res0 | __HFGRTR_EL2_RES0, res1);
-	set_sysreg_masks(kvm, HFGWTR_EL2, res0 | __HFGWTR_EL2_RES0, res1);
+	get_reg_fixed_bits(kvm, HFGRTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGRTR_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HFGWTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGWTR_EL2, res0, res1);
 
 	/* HDFG[RW]TR_EL2 */
-	res0 = res1 = 0;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, DoubleLock, IMP))
-		res0 |= HDFGRTR_EL2_OSDLR_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP))
-		res0 |= (HDFGRTR_EL2_PMEVCNTRn_EL0 | HDFGRTR_EL2_PMEVTYPERn_EL0 |
-			 HDFGRTR_EL2_PMCCFILTR_EL0 | HDFGRTR_EL2_PMCCNTR_EL0 |
-			 HDFGRTR_EL2_PMCNTEN | HDFGRTR_EL2_PMINTEN |
-			 HDFGRTR_EL2_PMOVS | HDFGRTR_EL2_PMSELR_EL0 |
-			 HDFGRTR_EL2_PMMIR_EL1 | HDFGRTR_EL2_PMUSERENR_EL0 |
-			 HDFGRTR_EL2_PMCEIDn_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, IMP))
-		res0 |= (HDFGRTR_EL2_PMBLIMITR_EL1 | HDFGRTR_EL2_PMBPTR_EL1 |
-			 HDFGRTR_EL2_PMBSR_EL1 | HDFGRTR_EL2_PMSCR_EL1 |
-			 HDFGRTR_EL2_PMSEVFR_EL1 | HDFGRTR_EL2_PMSFCR_EL1 |
-			 HDFGRTR_EL2_PMSICR_EL1 | HDFGRTR_EL2_PMSIDR_EL1 |
-			 HDFGRTR_EL2_PMSIRR_EL1 | HDFGRTR_EL2_PMSLATFR_EL1 |
-			 HDFGRTR_EL2_PMBIDR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceVer, IMP))
-		res0 |= (HDFGRTR_EL2_TRC | HDFGRTR_EL2_TRCAUTHSTATUS |
-			 HDFGRTR_EL2_TRCAUXCTLR | HDFGRTR_EL2_TRCCLAIM |
-			 HDFGRTR_EL2_TRCCNTVRn | HDFGRTR_EL2_TRCID |
-			 HDFGRTR_EL2_TRCIMSPECn | HDFGRTR_EL2_TRCOSLSR |
-			 HDFGRTR_EL2_TRCPRGCTLR | HDFGRTR_EL2_TRCSEQSTR |
-			 HDFGRTR_EL2_TRCSSCSRn | HDFGRTR_EL2_TRCSTATR |
-			 HDFGRTR_EL2_TRCVICTLR);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceBuffer, IMP))
-		res0 |= (HDFGRTR_EL2_TRBBASER_EL1 | HDFGRTR_EL2_TRBIDR_EL1 |
-			 HDFGRTR_EL2_TRBLIMITR_EL1 | HDFGRTR_EL2_TRBMAR_EL1 |
-			 HDFGRTR_EL2_TRBPTR_EL1 | HDFGRTR_EL2_TRBSR_EL1 |
-			 HDFGRTR_EL2_TRBTRG_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, BRBE, IMP))
-		res0 |= (HDFGRTR_EL2_nBRBIDR | HDFGRTR_EL2_nBRBCTL |
-			 HDFGRTR_EL2_nBRBDATA);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, V1P2))
-		res0 |= HDFGRTR_EL2_nPMSNEVFR_EL1;
-	set_sysreg_masks(kvm, HDFGRTR_EL2, res0 | HDFGRTR_EL2_RES0, res1);
-
-	/* Reuse the bits from the read-side and add the write-specific stuff */
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP))
-		res0 |= (HDFGWTR_EL2_PMCR_EL0 | HDFGWTR_EL2_PMSWINC_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceVer, IMP))
-		res0 |= HDFGWTR_EL2_TRCOSLAR;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceFilt, IMP))
-		res0 |= HDFGWTR_EL2_TRFCR_EL1;
-	set_sysreg_masks(kvm, HFGWTR_EL2, res0 | HDFGWTR_EL2_RES0, res1);
+	get_reg_fixed_bits(kvm, HDFGRTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGRTR_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HDFGWTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGWTR_EL2, res0, res1);
 
 	/* HFGITR_EL2 */
-	res0 = HFGITR_EL2_RES0;
-	res1 = HFGITR_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, DPB, DPB2))
-		res0 |= HFGITR_EL2_DCCVADP;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, PAN, PAN2))
-		res0 |= (HFGITR_EL2_ATS1E1RP | HFGITR_EL2_ATS1E1WP);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, OS))
-		res0 |= (HFGITR_EL2_TLBIRVAALE1OS | HFGITR_EL2_TLBIRVALE1OS |
-			 HFGITR_EL2_TLBIRVAAE1OS | HFGITR_EL2_TLBIRVAE1OS |
-			 HFGITR_EL2_TLBIVAALE1OS | HFGITR_EL2_TLBIVALE1OS |
-			 HFGITR_EL2_TLBIVAAE1OS | HFGITR_EL2_TLBIASIDE1OS |
-			 HFGITR_EL2_TLBIVAE1OS | HFGITR_EL2_TLBIVMALLE1OS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, RANGE))
-		res0 |= (HFGITR_EL2_TLBIRVAALE1 | HFGITR_EL2_TLBIRVALE1 |
-			 HFGITR_EL2_TLBIRVAAE1 | HFGITR_EL2_TLBIRVAE1 |
-			 HFGITR_EL2_TLBIRVAALE1IS | HFGITR_EL2_TLBIRVALE1IS |
-			 HFGITR_EL2_TLBIRVAAE1IS | HFGITR_EL2_TLBIRVAE1IS |
-			 HFGITR_EL2_TLBIRVAALE1OS | HFGITR_EL2_TLBIRVALE1OS |
-			 HFGITR_EL2_TLBIRVAAE1OS | HFGITR_EL2_TLBIRVAE1OS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, SPECRES, IMP))
-		res0 |= (HFGITR_EL2_CFPRCTX | HFGITR_EL2_DVPRCTX |
-			 HFGITR_EL2_CPPRCTX);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, BRBE, IMP))
-		res0 |= (HFGITR_EL2_nBRBINJ | HFGITR_EL2_nBRBIALL);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= (HFGITR_EL2_nGCSPUSHM_EL1 | HFGITR_EL2_nGCSSTR_EL1 |
-			 HFGITR_EL2_nGCSEPP);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, SPECRES, COSP_RCTX))
-		res0 |= HFGITR_EL2_COSPRCTX;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, ATS1A, IMP))
-		res0 |= HFGITR_EL2_ATS1E1A;
+	get_reg_fixed_bits(kvm, HFGITR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HFGITR_EL2, res0, res1);
 
 	/* HAFGRTR_EL2 - not a lot to see here */
-	res0 = HAFGRTR_EL2_RES0;
-	res1 = HAFGRTR_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, V1P1))
-		res0 |= ~(res0 | res1);
+	get_reg_fixed_bits(kvm, HAFGRTR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HAFGRTR_EL2, res0, res1);
 
+	/* HFG[RW]TR2_EL2 */
+	get_reg_fixed_bits(kvm, HFGRTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGRTR2_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HFGWTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGWTR2_EL2, res0, res1);
+
+	/* HDFG[RW]TR2_EL2 */
+	get_reg_fixed_bits(kvm, HDFGRTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGRTR2_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HDFGWTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGWTR2_EL2, res0, res1);
+
+	/* HFGITR2_EL2 */
+	get_reg_fixed_bits(kvm, HFGITR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGITR2_EL2, res0, res1);
+
 	/* TCR2_EL2 */
 	res0 = TCR2_EL2_RES0;
 	res1 = TCR2_EL2_RES1;
@@ -1318,9 +1772,12 @@ int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu)
 	res0 |= ICH_HCR_EL2_DVIM | ICH_HCR_EL2_vSGIEOICount;
 	set_sysreg_masks(kvm, ICH_HCR_EL2, res0, res1);
 
+	/* VNCR_EL2 */
+	set_sysreg_masks(kvm, VNCR_EL2, VNCR_EL2_RES0, VNCR_EL2_RES1);
+
 out:
 	for (enum vcpu_sysreg sr = __SANITISED_REG_START__; sr < NR_SYS_REGS; sr++)
-		(void)__vcpu_sys_reg(vcpu, sr);
+		__vcpu_rmw_sys_reg(vcpu, sr, |=, 0);
 
 	return 0;
 }
@@ -1338,6 +1795,9 @@ void check_nested_vcpu_requests(struct kvm_vcpu *vcpu)
 		write_unlock(&vcpu->kvm->mmu_lock);
 	}
 
+	if (kvm_check_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu))
+		kvm_map_l1_vncr(vcpu);
+
 	/* Must be last, as may switch context! */
 	if (kvm_check_request(KVM_REQ_GUEST_HYP_IRQ_PENDING, vcpu))
 		kvm_inject_nested_irq(vcpu);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/pkvm.c linux-libre-6.16-gnu/arch/arm64/kvm/pkvm.c
index 0f89157d31fd..fcd70bfe44fb 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/pkvm.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/pkvm.c
@@ -5,12 +5,12 @@
  */
 
 #include <linux/init.h>
+#include <linux/interval_tree_generic.h>
 #include <linux/kmemleak.h>
 #include <linux/kvm_host.h>
 #include <asm/kvm_mmu.h>
 #include <linux/memblock.h>
 #include <linux/mutex.h>
-#include <linux/sort.h>
 
 #include <asm/kvm_pkvm.h>
 
@@ -24,23 +24,6 @@ static unsigned int *hyp_memblock_nr_ptr = &kvm_nvhe_sym(hyp_memblock_nr);
 phys_addr_t hyp_mem_base;
 phys_addr_t hyp_mem_size;
 
-static int cmp_hyp_memblock(const void *p1, const void *p2)
-{
-	const struct memblock_region *r1 = p1;
-	const struct memblock_region *r2 = p2;
-
-	return r1->base < r2->base ? -1 : (r1->base > r2->base);
-}
-
-static void __init sort_memblock_regions(void)
-{
-	sort(hyp_memory,
-	     *hyp_memblock_nr_ptr,
-	     sizeof(struct memblock_region),
-	     cmp_hyp_memblock,
-	     NULL);
-}
-
 static int __init register_memblock_regions(void)
 {
 	struct memblock_region *reg;
@@ -52,7 +35,6 @@ static int __init register_memblock_regions(void)
 		hyp_memory[*hyp_memblock_nr_ptr] = *reg;
 		(*hyp_memblock_nr_ptr)++;
 	}
-	sort_memblock_regions();
 
 	return 0;
 }
@@ -79,6 +61,7 @@ void __init kvm_hyp_reserve(void)
 	hyp_mem_pages += host_s2_pgtable_pages();
 	hyp_mem_pages += hyp_vm_table_pages();
 	hyp_mem_pages += hyp_vmemmap_pages(STRUCT_HYP_PAGE_SIZE);
+	hyp_mem_pages += pkvm_selftest_pages();
 	hyp_mem_pages += hyp_ffa_proxy_pages();
 
 	/*
@@ -262,6 +245,7 @@ static int __init finalize_pkvm(void)
 	 * at, which would end badly once inaccessible.
 	 */
 	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+	kmemleak_free_part(__hyp_data_start, __hyp_data_end - __hyp_data_start);
 	kmemleak_free_part(__hyp_rodata_start, __hyp_rodata_end - __hyp_rodata_start);
 	kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size);
 
@@ -273,80 +257,68 @@ static int __init finalize_pkvm(void)
 }
 device_initcall_sync(finalize_pkvm);
 
-static int cmp_mappings(struct rb_node *node, const struct rb_node *parent)
+static u64 __pkvm_mapping_start(struct pkvm_mapping *m)
 {
-	struct pkvm_mapping *a = rb_entry(node, struct pkvm_mapping, node);
-	struct pkvm_mapping *b = rb_entry(parent, struct pkvm_mapping, node);
-
-	if (a->gfn < b->gfn)
-		return -1;
-	if (a->gfn > b->gfn)
-		return 1;
-	return 0;
+	return m->gfn * PAGE_SIZE;
 }
 
-static struct rb_node *find_first_mapping_node(struct rb_root *root, u64 gfn)
+static u64 __pkvm_mapping_end(struct pkvm_mapping *m)
 {
-	struct rb_node *node = root->rb_node, *prev = NULL;
-	struct pkvm_mapping *mapping;
-
-	while (node) {
-		mapping = rb_entry(node, struct pkvm_mapping, node);
-		if (mapping->gfn == gfn)
-			return node;
-		prev = node;
-		node = (gfn < mapping->gfn) ? node->rb_left : node->rb_right;
-	}
-
-	return prev;
+	return (m->gfn + m->nr_pages) * PAGE_SIZE - 1;
 }
 
+INTERVAL_TREE_DEFINE(struct pkvm_mapping, node, u64, __subtree_last,
+		     __pkvm_mapping_start, __pkvm_mapping_end, static,
+		     pkvm_mapping);
+
 /*
- * __tmp is updated to rb_next(__tmp) *before* entering the body of the loop to allow freeing
- * of __map inline.
+ * __tmp is updated to iter_first(pkvm_mappings) *before* entering the body of the loop to allow
+ * freeing of __map inline.
  */
 #define for_each_mapping_in_range_safe(__pgt, __start, __end, __map)				\
-	for (struct rb_node *__tmp = find_first_mapping_node(&(__pgt)->pkvm_mappings,		\
-							     ((__start) >> PAGE_SHIFT));	\
+	for (struct pkvm_mapping *__tmp = pkvm_mapping_iter_first(&(__pgt)->pkvm_mappings,	\
+								  __start, __end - 1);		\
 	     __tmp && ({									\
-				__map = rb_entry(__tmp, struct pkvm_mapping, node);		\
-				__tmp = rb_next(__tmp);						\
+				__map = __tmp;							\
+				__tmp = pkvm_mapping_iter_next(__map, __start, __end - 1);	\
 				true;								\
 		       });									\
-	    )											\
-		if (__map->gfn < ((__start) >> PAGE_SHIFT))					\
-			continue;								\
-		else if (__map->gfn >= ((__end) >> PAGE_SHIFT))					\
-			break;									\
-		else
+	    )
 
 int pkvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 			     struct kvm_pgtable_mm_ops *mm_ops)
 {
-	pgt->pkvm_mappings	= RB_ROOT;
+	pgt->pkvm_mappings	= RB_ROOT_CACHED;
 	pgt->mmu		= mmu;
 
 	return 0;
 }
 
-void pkvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
+static int __pkvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 start, u64 end)
 {
 	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
 	pkvm_handle_t handle = kvm->arch.pkvm.handle;
 	struct pkvm_mapping *mapping;
-	struct rb_node *node;
+	int ret;
 
 	if (!handle)
-		return;
+		return 0;
 
-	node = rb_first(&pgt->pkvm_mappings);
-	while (node) {
-		mapping = rb_entry(node, struct pkvm_mapping, node);
-		kvm_call_hyp_nvhe(__pkvm_host_unshare_guest, handle, mapping->gfn);
-		node = rb_next(node);
-		rb_erase(&mapping->node, &pgt->pkvm_mappings);
+	for_each_mapping_in_range_safe(pgt, start, end, mapping) {
+		ret = kvm_call_hyp_nvhe(__pkvm_host_unshare_guest, handle, mapping->gfn,
+					mapping->nr_pages);
+		if (WARN_ON(ret))
+			return ret;
+		pkvm_mapping_remove(mapping, &pgt->pkvm_mappings);
 		kfree(mapping);
 	}
+
+	return 0;
+}
+
+void pkvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
+{
+	__pkvm_pgtable_stage2_unmap(pgt, 0, ~(0ULL));
 }
 
 int pkvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
@@ -360,42 +332,46 @@ int pkvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
 	u64 pfn = phys >> PAGE_SHIFT;
 	int ret;
 
-	if (size != PAGE_SIZE)
+	if (size != PAGE_SIZE && size != PMD_SIZE)
 		return -EINVAL;
 
 	lockdep_assert_held_write(&kvm->mmu_lock);
-	ret = kvm_call_hyp_nvhe(__pkvm_host_share_guest, pfn, gfn, prot);
-	if (ret) {
-		/* Is the gfn already mapped due to a racing vCPU? */
-		if (ret == -EPERM)
+
+	/*
+	 * Calling stage2_map() on top of existing mappings is either happening because of a race
+	 * with another vCPU, or because we're changing between page and block mappings. As per
+	 * user_mem_abort(), same-size permission faults are handled in the relax_perms() path.
+	 */
+	mapping = pkvm_mapping_iter_first(&pgt->pkvm_mappings, addr, addr + size - 1);
+	if (mapping) {
+		if (size == (mapping->nr_pages * PAGE_SIZE))
 			return -EAGAIN;
+
+		/* Remove _any_ pkvm_mapping overlapping with the range, bigger or smaller. */
+		ret = __pkvm_pgtable_stage2_unmap(pgt, addr, addr + size);
+		if (ret)
+			return ret;
+		mapping = NULL;
 	}
 
+	ret = kvm_call_hyp_nvhe(__pkvm_host_share_guest, pfn, gfn, size / PAGE_SIZE, prot);
+	if (WARN_ON(ret))
+		return ret;
+
 	swap(mapping, cache->mapping);
 	mapping->gfn = gfn;
 	mapping->pfn = pfn;
-	WARN_ON(rb_find_add(&mapping->node, &pgt->pkvm_mappings, cmp_mappings));
+	mapping->nr_pages = size / PAGE_SIZE;
+	pkvm_mapping_insert(mapping, &pgt->pkvm_mappings);
 
 	return ret;
 }
 
 int pkvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
 {
-	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
-	pkvm_handle_t handle = kvm->arch.pkvm.handle;
-	struct pkvm_mapping *mapping;
-	int ret = 0;
-
-	lockdep_assert_held_write(&kvm->mmu_lock);
-	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping) {
-		ret = kvm_call_hyp_nvhe(__pkvm_host_unshare_guest, handle, mapping->gfn);
-		if (WARN_ON(ret))
-			break;
-		rb_erase(&mapping->node, &pgt->pkvm_mappings);
-		kfree(mapping);
-	}
+	lockdep_assert_held_write(&kvm_s2_mmu_to_kvm(pgt->mmu)->mmu_lock);
 
-	return ret;
+	return __pkvm_pgtable_stage2_unmap(pgt, addr, addr + size);
 }
 
 int pkvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size)
@@ -407,7 +383,8 @@ int pkvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size)
 
 	lockdep_assert_held(&kvm->mmu_lock);
 	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping) {
-		ret = kvm_call_hyp_nvhe(__pkvm_host_wrprotect_guest, handle, mapping->gfn);
+		ret = kvm_call_hyp_nvhe(__pkvm_host_wrprotect_guest, handle, mapping->gfn,
+					mapping->nr_pages);
 		if (WARN_ON(ret))
 			break;
 	}
@@ -422,7 +399,8 @@ int pkvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
 
 	lockdep_assert_held(&kvm->mmu_lock);
 	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping)
-		__clean_dcache_guest_page(pfn_to_kaddr(mapping->pfn), PAGE_SIZE);
+		__clean_dcache_guest_page(pfn_to_kaddr(mapping->pfn),
+					  PAGE_SIZE * mapping->nr_pages);
 
 	return 0;
 }
@@ -437,7 +415,7 @@ bool pkvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr, u64
 	lockdep_assert_held(&kvm->mmu_lock);
 	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping)
 		young |= kvm_call_hyp_nvhe(__pkvm_host_test_clear_young_guest, handle, mapping->gfn,
-					   mkold);
+					   mapping->nr_pages, mkold);
 
 	return young;
 }
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/pmu-emul.c linux-libre-6.16-gnu/arch/arm64/kvm/pmu-emul.c
index a1bc10d7116a..b03dbda7f1ab 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/pmu-emul.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/pmu-emul.c
@@ -178,7 +178,7 @@ static void kvm_pmu_set_pmc_value(struct kvm_pmc *pmc, u64 val, bool force)
 		val |= lower_32_bits(val);
 	}
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 
 	/* Recreate the perf event to reflect the updated sample_period */
 	kvm_pmu_create_perf_event(pmc);
@@ -204,7 +204,7 @@ void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
 void kvm_pmu_set_counter_value_user(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
 {
 	kvm_pmu_release_perf_event(kvm_vcpu_idx_to_pmc(vcpu, select_idx));
-	__vcpu_sys_reg(vcpu, counter_index_to_reg(select_idx)) = val;
+	__vcpu_assign_sys_reg(vcpu, counter_index_to_reg(select_idx), val);
 	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 }
 
@@ -239,7 +239,7 @@ static void kvm_pmu_stop_counter(struct kvm_pmc *pmc)
 
 	reg = counter_index_to_reg(pmc->idx);
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 
 	kvm_pmu_release_perf_event(pmc);
 }
@@ -280,7 +280,7 @@ static u64 kvm_pmu_hyp_counter_mask(struct kvm_vcpu *vcpu)
 		return 0;
 
 	hpmn = SYS_FIELD_GET(MDCR_EL2, HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
-	n = vcpu->kvm->arch.pmcr_n;
+	n = vcpu->kvm->arch.nr_pmu_counters;
 
 	/*
 	 * Programming HPMN to a value greater than PMCR_EL0.N is
@@ -503,14 +503,14 @@ static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu,
 		reg = __vcpu_sys_reg(vcpu, counter_index_to_reg(i)) + 1;
 		if (!kvm_pmc_is_64bit(pmc))
 			reg = lower_32_bits(reg);
-		__vcpu_sys_reg(vcpu, counter_index_to_reg(i)) = reg;
+		__vcpu_assign_sys_reg(vcpu, counter_index_to_reg(i), reg);
 
 		/* No overflow? move on */
 		if (kvm_pmc_has_64bit_overflow(pmc) ? reg : lower_32_bits(reg))
 			continue;
 
 		/* Mark overflow */
-		__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
+		__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, BIT(i));
 
 		if (kvm_pmu_counter_can_chain(pmc))
 			kvm_pmu_counter_increment(vcpu, BIT(i + 1),
@@ -556,7 +556,7 @@ static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
 	perf_event->attr.sample_period = period;
 	perf_event->hw.sample_period = period;
 
-	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx);
+	__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, BIT(idx));
 
 	if (kvm_pmu_counter_can_chain(pmc))
 		kvm_pmu_counter_increment(vcpu, BIT(idx + 1),
@@ -602,20 +602,18 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 		kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
 	/* The reset bits don't indicate any state, and shouldn't be saved. */
-	__vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P);
+	__vcpu_assign_sys_reg(vcpu, PMCR_EL0, (val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P)));
 
 	if (val & ARMV8_PMU_PMCR_C)
 		kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0);
 
 	if (val & ARMV8_PMU_PMCR_P) {
-		/*
-		 * Unlike other PMU sysregs, the controls in PMCR_EL0 always apply
-		 * to the 'guest' range of counters and never the 'hyp' range.
-		 */
 		unsigned long mask = kvm_pmu_implemented_counter_mask(vcpu) &
-				     ~kvm_pmu_hyp_counter_mask(vcpu) &
 				     ~BIT(ARMV8_PMU_CYCLE_IDX);
 
+		if (!vcpu_is_el2(vcpu))
+			mask &= ~kvm_pmu_hyp_counter_mask(vcpu);
+
 		for_each_set_bit(i, &mask, 32)
 			kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, i), 0, true);
 	}
@@ -781,7 +779,7 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
 	u64 reg;
 
 	reg = counter_index_to_evtreg(pmc->idx);
-	__vcpu_sys_reg(vcpu, reg) = data & kvm_pmu_evtyper_mask(vcpu->kvm);
+	__vcpu_assign_sys_reg(vcpu, reg, (data & kvm_pmu_evtyper_mask(vcpu->kvm)));
 
 	kvm_pmu_create_perf_event(pmc);
 }
@@ -916,9 +914,9 @@ void kvm_vcpu_reload_pmu(struct kvm_vcpu *vcpu)
 {
 	u64 mask = kvm_pmu_implemented_counter_mask(vcpu);
 
-	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= mask;
-	__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= mask;
-	__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= mask;
+	__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, &=, mask);
+	__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, &=, mask);
+	__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, &=, mask);
 
 	kvm_pmu_reprogram_counter_mask(vcpu, mask);
 }
@@ -1027,12 +1025,30 @@ u8 kvm_arm_pmu_get_max_counters(struct kvm *kvm)
 	return bitmap_weight(arm_pmu->cntr_mask, ARMV8_PMU_MAX_GENERAL_COUNTERS);
 }
 
+static void kvm_arm_set_nr_counters(struct kvm *kvm, unsigned int nr)
+{
+	kvm->arch.nr_pmu_counters = nr;
+
+	/* Reset MDCR_EL2.HPMN behind the vcpus' back... */
+	if (test_bit(KVM_ARM_VCPU_HAS_EL2, kvm->arch.vcpu_features)) {
+		struct kvm_vcpu *vcpu;
+		unsigned long i;
+
+		kvm_for_each_vcpu(i, vcpu, kvm) {
+			u64 val = __vcpu_sys_reg(vcpu, MDCR_EL2);
+			val &= ~MDCR_EL2_HPMN;
+			val |= FIELD_PREP(MDCR_EL2_HPMN, kvm->arch.nr_pmu_counters);
+			__vcpu_assign_sys_reg(vcpu, MDCR_EL2, val);
+		}
+	}
+}
+
 static void kvm_arm_set_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu)
 {
 	lockdep_assert_held(&kvm->arch.config_lock);
 
 	kvm->arch.arm_pmu = arm_pmu;
-	kvm->arch.pmcr_n = kvm_arm_pmu_get_max_counters(kvm);
+	kvm_arm_set_nr_counters(kvm, kvm_arm_pmu_get_max_counters(kvm));
 }
 
 /**
@@ -1088,6 +1104,20 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 	return ret;
 }
 
+static int kvm_arm_pmu_v3_set_nr_counters(struct kvm_vcpu *vcpu, unsigned int n)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	if (!kvm->arch.arm_pmu)
+		return -EINVAL;
+
+	if (n > kvm_arm_pmu_get_max_counters(kvm))
+		return -EINVAL;
+
+	kvm_arm_set_nr_counters(kvm, n);
+	return 0;
+}
+
 int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -1184,6 +1214,15 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 
 		return kvm_arm_pmu_v3_set_pmu(vcpu, pmu_id);
 	}
+	case KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS: {
+		unsigned int __user *uaddr = (unsigned int __user *)(long)attr->addr;
+		unsigned int n;
+
+		if (get_user(n, uaddr))
+			return -EFAULT;
+
+		return kvm_arm_pmu_v3_set_nr_counters(vcpu, n);
+	}
 	case KVM_ARM_VCPU_PMU_V3_INIT:
 		return kvm_arm_pmu_v3_init(vcpu);
 	}
@@ -1222,6 +1261,7 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 	case KVM_ARM_VCPU_PMU_V3_INIT:
 	case KVM_ARM_VCPU_PMU_V3_FILTER:
 	case KVM_ARM_VCPU_PMU_V3_SET_PMU:
+	case KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS:
 		if (kvm_vcpu_has_pmu(vcpu))
 			return 0;
 	}
@@ -1260,8 +1300,12 @@ u8 kvm_arm_pmu_get_pmuver_limit(void)
 u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu)
 {
 	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
+	u64 n = vcpu->kvm->arch.nr_pmu_counters;
+
+	if (vcpu_has_nv(vcpu) && !vcpu_is_el2(vcpu))
+		n = FIELD_GET(MDCR_EL2_HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
 
-	return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N);
+	return u64_replace_bits(pmcr, n, ARMV8_PMU_PMCR_N);
 }
 
 void kvm_pmu_nested_transition(struct kvm_vcpu *vcpu)
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/reset.c linux-libre-6.16-gnu/arch/arm64/kvm/reset.c
index f82fcc614e13..959532422d3a 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/reset.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/reset.c
@@ -158,6 +158,8 @@ void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu)
 	if (sve_state)
 		kvm_unshare_hyp(sve_state, sve_state + vcpu_sve_state_size(vcpu));
 	kfree(sve_state);
+	free_page((unsigned long)vcpu->arch.ctxt.vncr_array);
+	kfree(vcpu->arch.vncr_tlb);
 	kfree(vcpu->arch.ccsidr);
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/sys_regs.c linux-libre-6.16-gnu/arch/arm64/kvm/sys_regs.c
index 5dde9285afc8..c20bd6f21e60 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/sys_regs.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/sys_regs.c
@@ -228,7 +228,7 @@ void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 		 * to reverse-translate virtual EL2 system registers for a
 		 * non-VHE guest hypervisor.
 		 */
-		__vcpu_sys_reg(vcpu, reg) = val;
+		__vcpu_assign_sys_reg(vcpu, reg, val);
 
 		switch (reg) {
 		case CNTHCTL_EL2:
@@ -263,7 +263,7 @@ void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 		return;
 
 memory_write:
-	 __vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
 /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
@@ -605,7 +605,7 @@ static int set_oslsr_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	if ((val ^ rd->val) & ~OSLSR_EL1_OSLK)
 		return -EINVAL;
 
-	__vcpu_sys_reg(vcpu, rd->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, rd->reg, val);
 	return 0;
 }
 
@@ -785,13 +785,13 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
 static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 mask = BIT(ARMV8_PMU_CYCLE_IDX);
-	u8 n = vcpu->kvm->arch.pmcr_n;
+	u8 n = vcpu->kvm->arch.nr_pmu_counters;
 
 	if (n)
 		mask |= GENMASK(n - 1, 0);
 
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= mask;
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, mask);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -799,7 +799,7 @@ static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 static u64 reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= GENMASK(31, 0);
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, GENMASK(31, 0));
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -811,7 +811,7 @@ static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 		return 0;
 
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= kvm_pmu_evtyper_mask(vcpu->kvm);
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, kvm_pmu_evtyper_mask(vcpu->kvm));
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -819,7 +819,7 @@ static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 static u64 reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= PMSELR_EL0_SEL_MASK;
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, PMSELR_EL0_SEL_MASK);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -835,7 +835,7 @@ static u64 reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	 * The value of PMCR.N field is included when the
 	 * vCPU register is read via kvm_vcpu_read_pmcr().
 	 */
-	__vcpu_sys_reg(vcpu, r->reg) = pmcr;
+	__vcpu_assign_sys_reg(vcpu, r->reg, pmcr);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -907,7 +907,7 @@ static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		return false;
 
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, PMSELR_EL0) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, PMSELR_EL0, p->regval);
 	else
 		/* return PMSELR.SEL field */
 		p->regval = __vcpu_sys_reg(vcpu, PMSELR_EL0)
@@ -1076,7 +1076,7 @@ static int set_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 va
 {
 	u64 mask = kvm_pmu_accessible_counter_mask(vcpu);
 
-	__vcpu_sys_reg(vcpu, r->reg) = val & mask;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val & mask);
 	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
 	return 0;
@@ -1103,10 +1103,10 @@ static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		val = p->regval & mask;
 		if (r->Op2 & 0x1)
 			/* accessing PMCNTENSET_EL0 */
-			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
+			__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, |=, val);
 		else
 			/* accessing PMCNTENCLR_EL0 */
-			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
+			__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, &=, ~val);
 
 		kvm_pmu_reprogram_counter_mask(vcpu, val);
 	} else {
@@ -1129,10 +1129,10 @@ static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 		if (r->Op2 & 0x1)
 			/* accessing PMINTENSET_EL1 */
-			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) |= val;
+			__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, |=, val);
 		else
 			/* accessing PMINTENCLR_EL1 */
-			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
+			__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, &=, ~val);
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
 	}
@@ -1151,10 +1151,10 @@ static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	if (p->is_write) {
 		if (r->CRm & 0x2)
 			/* accessing PMOVSSET_EL0 */
-			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask);
+			__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, (p->regval & mask));
 		else
 			/* accessing PMOVSCLR_EL0 */
-			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
+			__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, &=, ~(p->regval & mask));
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 	}
@@ -1185,8 +1185,8 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		if (!vcpu_mode_priv(vcpu))
 			return undef_access(vcpu, p, r);
 
-		__vcpu_sys_reg(vcpu, PMUSERENR_EL0) =
-			       p->regval & ARMV8_PMU_USERENR_MASK;
+		__vcpu_assign_sys_reg(vcpu, PMUSERENR_EL0,
+				      (p->regval & ARMV8_PMU_USERENR_MASK));
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMUSERENR_EL0)
 			    & ARMV8_PMU_USERENR_MASK;
@@ -1216,8 +1216,9 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	 * with the existing KVM behavior.
 	 */
 	if (!kvm_vm_has_ran_once(kvm) &&
+	    !vcpu_has_nv(vcpu)	      &&
 	    new_n <= kvm_arm_pmu_get_max_counters(kvm))
-		kvm->arch.pmcr_n = new_n;
+		kvm->arch.nr_pmu_counters = new_n;
 
 	mutex_unlock(&kvm->arch.config_lock);
 
@@ -1236,7 +1237,7 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	if (!kvm_supports_32bit_el0())
 		val |= ARMV8_PMU_PMCR_LC;
 
-	__vcpu_sys_reg(vcpu, r->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val);
 	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
 	return 0;
@@ -1600,13 +1601,14 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 		val = sanitise_id_aa64pfr0_el1(vcpu, val);
 		break;
 	case SYS_ID_AA64PFR1_EL1:
-		if (!kvm_has_mte(vcpu->kvm))
+		if (!kvm_has_mte(vcpu->kvm)) {
 			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
+			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE_frac);
+		}
 
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SME);
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_RNDR_trap);
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_NMI);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE_frac);
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_GCS);
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_THE);
 		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTEX);
@@ -1959,11 +1961,34 @@ static int set_id_aa64pfr1_el1(struct kvm_vcpu *vcpu,
 {
 	u64 hw_val = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 	u64 mpam_mask = ID_AA64PFR1_EL1_MPAM_frac_MASK;
+	u8 mte = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE, hw_val);
+	u8 user_mte_frac = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE_frac, user_val);
+	u8 hw_mte_frac = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE_frac, hw_val);
 
 	/* See set_id_aa64pfr0_el1 for comment about MPAM */
 	if ((hw_val & mpam_mask) == (user_val & mpam_mask))
 		user_val &= ~ID_AA64PFR1_EL1_MPAM_frac_MASK;
 
+	/*
+	 * Previously MTE_frac was hidden from guest. However, if the
+	 * hardware supports MTE2 but not MTE_ASYM_FAULT then a value
+	 * of 0 for this field indicates that the hardware supports
+	 * MTE_ASYNC. Whereas, 0xf indicates MTE_ASYNC is not supported.
+	 *
+	 * As KVM must accept values from KVM provided by user-space,
+	 * when ID_AA64PFR1_EL1.MTE is 2 allow user-space to set
+	 * ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to avoid
+	 * incorrectly claiming hardware support for MTE_ASYNC in the
+	 * guest.
+	 */
+
+	if (mte == ID_AA64PFR1_EL1_MTE_MTE2 &&
+	    hw_mte_frac == ID_AA64PFR1_EL1_MTE_frac_NI &&
+	    user_mte_frac == ID_AA64PFR1_EL1_MTE_frac_ASYNC) {
+		user_val &= ~ID_AA64PFR1_EL1_MTE_frac_MASK;
+		user_val |= hw_val & ID_AA64PFR1_EL1_MTE_frac_MASK;
+	}
+
 	return set_id_reg(vcpu, rd, user_val);
 }
 
@@ -2188,7 +2213,7 @@ static u64 reset_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	if (kvm_has_mte(vcpu->kvm))
 		clidr |= 2ULL << CLIDR_TTYPE_SHIFT(loc);
 
-	__vcpu_sys_reg(vcpu, r->reg) = clidr;
+	__vcpu_assign_sys_reg(vcpu, r->reg, clidr);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -2202,7 +2227,7 @@ static int set_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	if ((val & CLIDR_EL1_RES0) || (!(ctr_el0 & CTR_EL0_IDC) && idc))
 		return -EINVAL;
 
-	__vcpu_sys_reg(vcpu, rd->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, rd->reg, val);
 
 	return 0;
 }
@@ -2287,15 +2312,6 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
 			"trap of EL2 register redirected to EL1");
 }
 
-#define EL2_REG(name, acc, rst, v) {		\
-	SYS_DESC(SYS_##name),			\
-	.access = acc,				\
-	.reset = rst,				\
-	.reg = name,				\
-	.visibility = el2_visibility,		\
-	.val = v,				\
-}
-
 #define EL2_REG_FILTERED(name, acc, rst, v, filter) {	\
 	SYS_DESC(SYS_##name),			\
 	.access = acc,				\
@@ -2305,6 +2321,9 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
 	.val = v,				\
 }
 
+#define EL2_REG(name, acc, rst, v)			\
+	EL2_REG_FILTERED(name, acc, rst, v, el2_visibility)
+
 #define EL2_REG_VNCR(name, rst, v)	EL2_REG(name, bad_vncr_trap, rst, v)
 #define EL2_REG_REDIR(name, rst, v)	EL2_REG(name, bad_redir_trap, rst, v)
 
@@ -2385,7 +2404,7 @@ static bool access_sp_el1(struct kvm_vcpu *vcpu,
 			  const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, SP_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, SP_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, SP_EL1);
 
@@ -2409,7 +2428,7 @@ static bool access_spsr(struct kvm_vcpu *vcpu,
 			const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, SPSR_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, SPSR_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, SPSR_EL1);
 
@@ -2421,7 +2440,7 @@ static bool access_cntkctl_el12(struct kvm_vcpu *vcpu,
 				const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, CNTKCTL_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, CNTKCTL_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, CNTKCTL_EL1);
 
@@ -2435,7 +2454,9 @@ static u64 reset_hcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	if (!cpus_have_final_cap(ARM64_HAS_HCR_NV1))
 		val |= HCR_E2H;
 
-	return __vcpu_sys_reg(vcpu, r->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val);
+
+	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
 static unsigned int __el2_visibility(const struct kvm_vcpu *vcpu,
@@ -2452,6 +2473,16 @@ static unsigned int sve_el2_visibility(const struct kvm_vcpu *vcpu,
 	return __el2_visibility(vcpu, rd, sve_visibility);
 }
 
+static unsigned int vncr_el2_visibility(const struct kvm_vcpu *vcpu,
+					const struct sys_reg_desc *rd)
+{
+	if (el2_visibility(vcpu, rd) == 0 &&
+	    kvm_has_feat(vcpu->kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
 static bool access_zcr_el2(struct kvm_vcpu *vcpu,
 			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
@@ -2576,16 +2607,33 @@ static bool access_mdcr(struct kvm_vcpu *vcpu,
 			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
 {
-	u64 old = __vcpu_sys_reg(vcpu, MDCR_EL2);
+	u64 hpmn, val, old = __vcpu_sys_reg(vcpu, MDCR_EL2);
 
-	if (!access_rw(vcpu, p, r))
-		return false;
+	if (!p->is_write) {
+		p->regval = old;
+		return true;
+	}
+
+	val = p->regval;
+	hpmn = FIELD_GET(MDCR_EL2_HPMN, val);
+
+	/*
+	 * If HPMN is out of bounds, limit it to what we actually
+	 * support. This matches the UNKNOWN definition of the field
+	 * in that case, and keeps the emulation simple. Sort of.
+	 */
+	if (hpmn > vcpu->kvm->arch.nr_pmu_counters) {
+		hpmn = vcpu->kvm->arch.nr_pmu_counters;
+		u64p_replace_bits(&val, hpmn, MDCR_EL2_HPMN);
+	}
+
+	__vcpu_assign_sys_reg(vcpu, MDCR_EL2, val);
 
 	/*
-	 * Request a reload of the PMU to enable/disable the counters affected
-	 * by HPME.
+	 * Request a reload of the PMU to enable/disable the counters
+	 * affected by HPME.
 	 */
-	if ((old ^ __vcpu_sys_reg(vcpu, MDCR_EL2)) & MDCR_EL2_HPME)
+	if ((old ^ val) & MDCR_EL2_HPME)
 		kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
 	return true;
@@ -2704,6 +2752,12 @@ static int set_imp_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	.set_user = set_imp_id_reg,			\
 	.reset = reset_imp_id_reg,			\
 	.val = mask,					\
+	}
+
+static u64 reset_mdcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	__vcpu_assign_sys_reg(vcpu, r->reg, vcpu->kvm->arch.nr_pmu_counters);
+	return vcpu->kvm->arch.nr_pmu_counters;
 }
 
 /*
@@ -3249,7 +3303,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
 	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
 	EL2_REG_VNCR(HCR_EL2, reset_hcr, 0),
-	EL2_REG(MDCR_EL2, access_mdcr, reset_val, 0),
+	EL2_REG(MDCR_EL2, access_mdcr, reset_mdcr, 0),
 	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
 	EL2_REG_VNCR(HSTR_EL2, reset_val, 0),
 	EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0),
@@ -3269,6 +3323,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 			 tcr2_el2_visibility),
 	EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
 	EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
+	EL2_REG_FILTERED(VNCR_EL2, bad_vncr_trap, reset_val, 0,
+			 vncr_el2_visibility),
 
 	{ SYS_DESC(SYS_DACR32_EL2), undef_access, reset_unknown, DACR32_EL2 },
 	EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0),
@@ -3552,8 +3608,7 @@ static bool handle_ripas2e1is(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 {
 	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
 	u64 vttbr = vcpu_read_sys_reg(vcpu, VTTBR_EL2);
-	u64 base, range, tg, num, scale;
-	int shift;
+	u64 base, range;
 
 	if (!kvm_supported_tlbi_ipas2_op(vcpu, sys_encoding))
 		return undef_access(vcpu, p, r);
@@ -3563,26 +3618,7 @@ static bool handle_ripas2e1is(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	 * of the guest's S2 (different base granule size, for example), we
 	 * decide to ignore TTL and only use the described range.
 	 */
-	tg	= FIELD_GET(GENMASK(47, 46), p->regval);
-	scale	= FIELD_GET(GENMASK(45, 44), p->regval);
-	num	= FIELD_GET(GENMASK(43, 39), p->regval);
-	base	= p->regval & GENMASK(36, 0);
-
-	switch(tg) {
-	case 1:
-		shift = 12;
-		break;
-	case 2:
-		shift = 14;
-		break;
-	case 3:
-	default:		/* IMPDEF: handle tg==0 as 64k */
-		shift = 16;
-		break;
-	}
-
-	base <<= shift;
-	range = __TLBI_RANGE_PAGES(num, scale) << shift;
+	base = decode_range_tlbi(p->regval, &range, NULL);
 
 	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm, get_vmid(vttbr),
 				   &(union tlbi_info) {
@@ -3648,11 +3684,22 @@ static void s2_mmu_tlbi_s1e1(struct kvm_s2_mmu *mmu,
 	WARN_ON(__kvm_tlbi_s1e2(mmu, info->va.addr, info->va.encoding));
 }
 
+static bool handle_tlbi_el2(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			    const struct sys_reg_desc *r)
+{
+	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
+
+	if (!kvm_supported_tlbi_s1e2_op(vcpu, sys_encoding))
+		return undef_access(vcpu, p, r);
+
+	kvm_handle_s1e2_tlbi(vcpu, sys_encoding, p->regval);
+	return true;
+}
+
 static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			    const struct sys_reg_desc *r)
 {
 	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
-	u64 vttbr = vcpu_read_sys_reg(vcpu, VTTBR_EL2);
 
 	/*
 	 * If we're here, this is because we've trapped on a EL1 TLBI
@@ -3663,6 +3710,13 @@ static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	 * - HCR_EL2.E2H == 0 : a non-VHE guest
 	 * - HCR_EL2.{E2H,TGE} == { 1, 0 } : a VHE guest in guest mode
 	 *
+	 * Another possibility is that we are invalidating the EL2 context
+	 * using EL1 instructions, but that we landed here because we need
+	 * additional invalidation for structures that are not held in the
+	 * CPU TLBs (such as the VNCR pseudo-TLB and its EL2 mapping). In
+	 * that case, we are guaranteed that HCR_EL2.{E2H,TGE} == { 1, 1 }
+	 * as we don't allow an NV-capable L1 in a nVHE configuration.
+	 *
 	 * We don't expect these helpers to ever be called when running
 	 * in a vEL1 context.
 	 */
@@ -3672,7 +3726,13 @@ static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	if (!kvm_supported_tlbi_s1e1_op(vcpu, sys_encoding))
 		return undef_access(vcpu, p, r);
 
-	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm, get_vmid(vttbr),
+	if (vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu)) {
+		kvm_handle_s1e2_tlbi(vcpu, sys_encoding, p->regval);
+		return true;
+	}
+
+	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm,
+				   get_vmid(__vcpu_sys_reg(vcpu, VTTBR_EL2)),
 				   &(union tlbi_info) {
 					   .va = {
 						   .addr = p->regval,
@@ -3794,16 +3854,21 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1IS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1IS, handle_ripas2e1is),
 
-	SYS_INSN(TLBI_ALLE2OS, undef_access),
-	SYS_INSN(TLBI_VAE2OS, undef_access),
+	SYS_INSN(TLBI_ALLE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2OS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1OS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2OS, undef_access),
+	SYS_INSN(TLBI_VALE2OS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1OS, handle_vmalls12e1is),
 
-	SYS_INSN(TLBI_RVAE2IS, undef_access),
-	SYS_INSN(TLBI_RVALE2IS, undef_access),
+	SYS_INSN(TLBI_RVAE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2IS, handle_tlbi_el2),
 
 	SYS_INSN(TLBI_ALLE1IS, handle_alle1is),
+
+	SYS_INSN(TLBI_VALE2IS, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_VMALLS12E1IS, handle_vmalls12e1is),
 	SYS_INSN(TLBI_IPAS2E1OS, handle_ipas2e1is),
 	SYS_INSN(TLBI_IPAS2E1, handle_ipas2e1is),
@@ -3813,11 +3878,17 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1, handle_ripas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1OS, handle_ripas2e1is),
-	SYS_INSN(TLBI_RVAE2OS, undef_access),
-	SYS_INSN(TLBI_RVALE2OS, undef_access),
-	SYS_INSN(TLBI_RVAE2, undef_access),
-	SYS_INSN(TLBI_RVALE2, undef_access),
+	SYS_INSN(TLBI_RVAE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVAE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_ALLE1, handle_alle1is),
+
+	SYS_INSN(TLBI_VALE2, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_VMALLS12E1, handle_vmalls12e1is),
 
 	SYS_INSN(TLBI_IPAS2E1ISNXS, handle_ipas2e1is),
@@ -3825,19 +3896,19 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1ISNXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1ISNXS, handle_ripas2e1is),
 
-	SYS_INSN(TLBI_ALLE2OSNXS, undef_access),
-	SYS_INSN(TLBI_VAE2OSNXS, undef_access),
+	SYS_INSN(TLBI_ALLE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2OSNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1OSNXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2OSNXS, undef_access),
+	SYS_INSN(TLBI_VALE2OSNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1OSNXS, handle_vmalls12e1is),
 
-	SYS_INSN(TLBI_RVAE2ISNXS, undef_access),
-	SYS_INSN(TLBI_RVALE2ISNXS, undef_access),
-	SYS_INSN(TLBI_ALLE2ISNXS, undef_access),
-	SYS_INSN(TLBI_VAE2ISNXS, undef_access),
+	SYS_INSN(TLBI_RVAE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2ISNXS, handle_tlbi_el2),
 
 	SYS_INSN(TLBI_ALLE1ISNXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2ISNXS, undef_access),
+	SYS_INSN(TLBI_VALE2ISNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1ISNXS, handle_vmalls12e1is),
 	SYS_INSN(TLBI_IPAS2E1OSNXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_IPAS2E1NXS, handle_ipas2e1is),
@@ -3847,14 +3918,14 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1NXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1NXS, handle_ripas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1OSNXS, handle_ripas2e1is),
-	SYS_INSN(TLBI_RVAE2OSNXS, undef_access),
-	SYS_INSN(TLBI_RVALE2OSNXS, undef_access),
-	SYS_INSN(TLBI_RVAE2NXS, undef_access),
-	SYS_INSN(TLBI_RVALE2NXS, undef_access),
-	SYS_INSN(TLBI_ALLE2NXS, undef_access),
-	SYS_INSN(TLBI_VAE2NXS, undef_access),
+	SYS_INSN(TLBI_RVAE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVAE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2NXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1NXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2NXS, undef_access),
+	SYS_INSN(TLBI_VALE2NXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1NXS, handle_vmalls12e1is),
 };
 
@@ -4721,7 +4792,7 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
 			r->reset(vcpu, r);
 
 		if (r->reg >= __SANITISED_REG_START__ && r->reg < NR_SYS_REGS)
-			(void)__vcpu_sys_reg(vcpu, r->reg);
+			__vcpu_rmw_sys_reg(vcpu, r->reg, |=, 0);
 	}
 
 	set_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags);
@@ -4943,7 +5014,7 @@ int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 	if (r->set_user) {
 		ret = (r->set_user)(vcpu, r, val);
 	} else {
-		__vcpu_sys_reg(vcpu, r->reg) = val;
+		__vcpu_assign_sys_reg(vcpu, r->reg, val);
 		ret = 0;
 	}
 
@@ -5153,65 +5224,13 @@ void kvm_calculate_traps(struct kvm_vcpu *vcpu)
 	if (test_bit(KVM_ARCH_FLAG_FGU_INITIALIZED, &kvm->arch.flags))
 		goto out;
 
-	kvm->arch.fgu[HFGxTR_GROUP] = (HFGxTR_EL2_nAMAIR2_EL1		|
-				       HFGxTR_EL2_nMAIR2_EL1		|
-				       HFGxTR_EL2_nS2POR_EL1		|
-				       HFGxTR_EL2_nACCDATA_EL1		|
-				       HFGxTR_EL2_nSMPRI_EL1_MASK	|
-				       HFGxTR_EL2_nTPIDR2_EL0_MASK);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, OS))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_TLBIRVAALE1OS|
-						HFGITR_EL2_TLBIRVALE1OS	|
-						HFGITR_EL2_TLBIRVAAE1OS	|
-						HFGITR_EL2_TLBIRVAE1OS	|
-						HFGITR_EL2_TLBIVAALE1OS	|
-						HFGITR_EL2_TLBIVALE1OS	|
-						HFGITR_EL2_TLBIVAAE1OS	|
-						HFGITR_EL2_TLBIASIDE1OS	|
-						HFGITR_EL2_TLBIVAE1OS	|
-						HFGITR_EL2_TLBIVMALLE1OS);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, RANGE))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_TLBIRVAALE1	|
-						HFGITR_EL2_TLBIRVALE1	|
-						HFGITR_EL2_TLBIRVAAE1	|
-						HFGITR_EL2_TLBIRVAE1	|
-						HFGITR_EL2_TLBIRVAALE1IS|
-						HFGITR_EL2_TLBIRVALE1IS	|
-						HFGITR_EL2_TLBIRVAAE1IS	|
-						HFGITR_EL2_TLBIRVAE1IS	|
-						HFGITR_EL2_TLBIRVAALE1OS|
-						HFGITR_EL2_TLBIRVALE1OS	|
-						HFGITR_EL2_TLBIRVAAE1OS	|
-						HFGITR_EL2_TLBIRVAE1OS);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, ATS1A, IMP))
-		kvm->arch.fgu[HFGITR_GROUP] |= HFGITR_EL2_ATS1E1A;
-
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, PAN, PAN2))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_ATS1E1RP |
-						HFGITR_EL2_ATS1E1WP);
-
-	if (!kvm_has_s1pie(kvm))
-		kvm->arch.fgu[HFGxTR_GROUP] |= (HFGxTR_EL2_nPIRE0_EL1 |
-						HFGxTR_EL2_nPIR_EL1);
-
-	if (!kvm_has_s1poe(kvm))
-		kvm->arch.fgu[HFGxTR_GROUP] |= (HFGxTR_EL2_nPOR_EL1 |
-						HFGxTR_EL2_nPOR_EL0);
-
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, IMP))
-		kvm->arch.fgu[HAFGRTR_GROUP] |= ~(HAFGRTR_EL2_RES0 |
-						  HAFGRTR_EL2_RES1);
-
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, BRBE, IMP)) {
-		kvm->arch.fgu[HDFGRTR_GROUP] |= (HDFGRTR_EL2_nBRBDATA  |
-						 HDFGRTR_EL2_nBRBCTL   |
-						 HDFGRTR_EL2_nBRBIDR);
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_nBRBINJ |
-						HFGITR_EL2_nBRBIALL);
-	}
+	compute_fgu(kvm, HFGRTR_GROUP);
+	compute_fgu(kvm, HFGITR_GROUP);
+	compute_fgu(kvm, HDFGRTR_GROUP);
+	compute_fgu(kvm, HAFGRTR_GROUP);
+	compute_fgu(kvm, HFGRTR2_GROUP);
+	compute_fgu(kvm, HFGITR2_GROUP);
+	compute_fgu(kvm, HDFGRTR2_GROUP);
 
 	set_bit(KVM_ARCH_FLAG_FGU_INITIALIZED, &kvm->arch.flags);
 out:
@@ -5269,6 +5288,8 @@ int __init kvm_sys_reg_table_init(void)
 
 	ret = populate_nv_trap_config();
 
+	check_feature_map();
+
 	for (i = 0; !ret && i < ARRAY_SIZE(sys_reg_descs); i++)
 		ret = populate_sysreg_config(sys_reg_descs + i, i);
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/sys_regs.h linux-libre-6.16-gnu/arch/arm64/kvm/sys_regs.h
index cc6338d38766..ef97d9fc67cc 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/sys_regs.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/sys_regs.h
@@ -137,7 +137,7 @@ static inline u64 reset_unknown(struct kvm_vcpu *vcpu,
 {
 	BUG_ON(!r->reg);
 	BUG_ON(r->reg >= NR_SYS_REGS);
-	__vcpu_sys_reg(vcpu, r->reg) = 0x1de7ec7edbadc0deULL;
+	__vcpu_assign_sys_reg(vcpu, r->reg, 0x1de7ec7edbadc0deULL);
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
@@ -145,7 +145,7 @@ static inline u64 reset_val(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	BUG_ON(!r->reg);
 	BUG_ON(r->reg >= NR_SYS_REGS);
-	__vcpu_sys_reg(vcpu, r->reg) = r->val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, r->val);
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/trace_arm.h linux-libre-6.16-gnu/arch/arm64/kvm/trace_arm.h
index c18c1a95831e..9c60f6465c78 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/trace_arm.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/trace_arm.h
@@ -176,7 +176,7 @@ TRACE_EVENT(kvm_set_way_flush,
 	    ),
 
 	    TP_printk("S/W flush at 0x%016lx (cache %s)",
-		      __entry->vcpu_pc, __entry->cache ? "on" : "off")
+		      __entry->vcpu_pc, str_on_off(__entry->cache))
 );
 
 TRACE_EVENT(kvm_toggle_cache,
@@ -196,8 +196,8 @@ TRACE_EVENT(kvm_toggle_cache,
 	    ),
 
 	    TP_printk("VM op at 0x%016lx (cache was %s, now %s)",
-		      __entry->vcpu_pc, __entry->was ? "on" : "off",
-		      __entry->now ? "on" : "off")
+		      __entry->vcpu_pc, str_on_off(__entry->was),
+		      str_on_off(__entry->now))
 );
 
 /*
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-debug.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-debug.c
index afb018528bc3..2684f273d9e1 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-debug.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-debug.c
@@ -320,3 +320,230 @@ void vgic_debug_init(struct kvm *kvm)
 void vgic_debug_destroy(struct kvm *kvm)
 {
 }
+
+/**
+ * struct vgic_its_iter - Iterator for traversing VGIC ITS device tables.
+ * @dev: Pointer to the current its_device being processed.
+ * @ite: Pointer to the current its_ite within the device being processed.
+ *
+ * This structure is used to maintain the current position during iteration
+ * over the ITS device tables. It holds pointers to both the current device
+ * and the current ITE within that device.
+ */
+struct vgic_its_iter {
+	struct its_device *dev;
+	struct its_ite *ite;
+};
+
+/**
+ * end_of_iter - Checks if the iterator has reached the end.
+ * @iter: The iterator to check.
+ *
+ * When the iterator completed processing the final ITE in the last device
+ * table, it was marked to indicate the end of iteration by setting its
+ * device and ITE pointers to NULL.
+ * This function checks whether the iterator was marked as end.
+ *
+ * Return: True if the iterator is marked as end, false otherwise.
+ */
+static inline bool end_of_iter(struct vgic_its_iter *iter)
+{
+	return !iter->dev && !iter->ite;
+}
+
+/**
+ * vgic_its_iter_next - Advances the iterator to the next entry in the ITS tables.
+ * @its: The VGIC ITS structure.
+ * @iter: The iterator to advance.
+ *
+ * This function moves the iterator to the next ITE within the current device,
+ * or to the first ITE of the next device if the current ITE is the last in
+ * the device. If the current device is the last device, the iterator is set
+ * to indicate the end of iteration.
+ */
+static void vgic_its_iter_next(struct vgic_its *its, struct vgic_its_iter *iter)
+{
+	struct its_device *dev = iter->dev;
+	struct its_ite *ite = iter->ite;
+
+	if (!ite || list_is_last(&ite->ite_list, &dev->itt_head)) {
+		if (list_is_last(&dev->dev_list, &its->device_list)) {
+			dev = NULL;
+			ite = NULL;
+		} else {
+			dev = list_next_entry(dev, dev_list);
+			ite = list_first_entry_or_null(&dev->itt_head,
+						       struct its_ite,
+						       ite_list);
+		}
+	} else {
+		ite = list_next_entry(ite, ite_list);
+	}
+
+	iter->dev = dev;
+	iter->ite = ite;
+}
+
+/**
+ * vgic_its_debug_start - Start function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @pos: The starting position (offset).
+ *
+ * This function initializes the iterator to the beginning of the ITS tables
+ * and advances it to the specified position. It acquires the its_lock mutex
+ * to protect shared data.
+ *
+ * Return: An iterator pointer on success, NULL if no devices are found or
+ *         the end of the list is reached, or ERR_PTR(-ENOMEM) on memory
+ *         allocation failure.
+ */
+static void *vgic_its_debug_start(struct seq_file *s, loff_t *pos)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter;
+	struct its_device *dev;
+	loff_t offset = *pos;
+
+	mutex_lock(&its->its_lock);
+
+	dev = list_first_entry_or_null(&its->device_list,
+				       struct its_device, dev_list);
+	if (!dev)
+		return NULL;
+
+	iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+	if (!iter)
+		return ERR_PTR(-ENOMEM);
+
+	iter->dev = dev;
+	iter->ite = list_first_entry_or_null(&dev->itt_head,
+					     struct its_ite, ite_list);
+
+	while (!end_of_iter(iter) && offset--)
+		vgic_its_iter_next(its, iter);
+
+	if (end_of_iter(iter)) {
+		kfree(iter);
+		return NULL;
+	}
+
+	return iter;
+}
+
+/**
+ * vgic_its_debug_next - Next function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ * @pos: The current position (offset).
+ *
+ * This function advances the iterator to the next entry and increments the
+ * position.
+ *
+ * Return: An iterator pointer on success, or NULL if the end of the list is
+ *         reached.
+ */
+static void *vgic_its_debug_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter = v;
+
+	++*pos;
+	vgic_its_iter_next(its, iter);
+
+	if (end_of_iter(iter)) {
+		kfree(iter);
+		return NULL;
+	}
+	return iter;
+}
+
+/**
+ * vgic_its_debug_stop - Stop function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ *
+ * This function frees the iterator and releases the its_lock mutex.
+ */
+static void vgic_its_debug_stop(struct seq_file *s, void *v)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter = v;
+
+	if (!IS_ERR_OR_NULL(iter))
+		kfree(iter);
+	mutex_unlock(&its->its_lock);
+}
+
+/**
+ * vgic_its_debug_show - Show function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ *
+ * This function formats and prints the ITS table entry information to the
+ * seq_file output.
+ *
+ * Return: 0 on success.
+ */
+static int vgic_its_debug_show(struct seq_file *s, void *v)
+{
+	struct vgic_its_iter *iter = v;
+	struct its_device *dev = iter->dev;
+	struct its_ite *ite = iter->ite;
+
+	if (!ite)
+		return 0;
+
+	if (list_is_first(&ite->ite_list, &dev->itt_head)) {
+		seq_printf(s, "\n");
+		seq_printf(s, "Device ID: 0x%x, Event ID Range: [0 - %llu]\n",
+			   dev->device_id, BIT_ULL(dev->num_eventid_bits) - 1);
+		seq_printf(s, "EVENT_ID    INTID  HWINTID   TARGET   COL_ID HW\n");
+		seq_printf(s, "-----------------------------------------------\n");
+	}
+
+	if (ite->irq && ite->collection) {
+		seq_printf(s, "%8u %8u %8u %8u %8u %2d\n",
+			   ite->event_id, ite->irq->intid, ite->irq->hwintid,
+			   ite->collection->target_addr,
+			   ite->collection->collection_id, ite->irq->hw);
+	}
+
+	return 0;
+}
+
+static const struct seq_operations vgic_its_debug_sops = {
+	.start = vgic_its_debug_start,
+	.next  = vgic_its_debug_next,
+	.stop  = vgic_its_debug_stop,
+	.show  = vgic_its_debug_show
+};
+
+DEFINE_SEQ_ATTRIBUTE(vgic_its_debug);
+
+/**
+ * vgic_its_debug_init - Initializes the debugfs interface for VGIC ITS.
+ * @dev: The KVM device structure.
+ *
+ * This function creates a debugfs file named "vgic-its-state@%its_base"
+ * to expose the ITS table information.
+ *
+ * Return: 0 on success.
+ */
+int vgic_its_debug_init(struct kvm_device *dev)
+{
+	struct vgic_its *its = dev->private;
+	char *name;
+
+	name = kasprintf(GFP_KERNEL, "vgic-its-state@%llx", (u64)its->vgic_its_base);
+	if (!name)
+		return -ENOMEM;
+
+	debugfs_create_file(name, 0444, dev->kvm->debugfs_dentry, its, &vgic_its_debug_fops);
+
+	kfree(name);
+	return 0;
+}
+
+void vgic_its_debug_destroy(struct kvm_device *dev)
+{
+}
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-init.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-init.c
index 1f33e71c2a73..eb1205654ac8 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-init.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-init.c
@@ -84,15 +84,40 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 		!kvm_vgic_global_state.can_emulate_gicv2)
 		return -ENODEV;
 
-	/* Must be held to avoid race with vCPU creation */
+	/*
+	 * Ensure mutual exclusion with vCPU creation and any vCPU ioctls by:
+	 *
+	 *  - Holding kvm->lock to prevent KVM_CREATE_VCPU from reaching
+	 *    kvm_arch_vcpu_precreate() and ensuring created_vcpus is stable.
+	 *    This alone is insufficient, as kvm_vm_ioctl_create_vcpu() drops
+	 *    the kvm->lock before completing the vCPU creation.
+	 */
 	lockdep_assert_held(&kvm->lock);
 
+	/*
+	 *  - Acquiring the vCPU mutex for every *online* vCPU to prevent
+	 *    concurrent vCPU ioctls for vCPUs already visible to userspace.
+	 */
 	ret = -EBUSY;
-	if (!lock_all_vcpus(kvm))
+	if (kvm_trylock_all_vcpus(kvm))
 		return ret;
 
+	/*
+	 *  - Taking the config_lock which protects VGIC data structures such
+	 *    as the per-vCPU arrays of private IRQs (SGIs, PPIs).
+	 */
 	mutex_lock(&kvm->arch.config_lock);
 
+	/*
+	 * - Bailing on the entire thing if a vCPU is in the middle of creation,
+	 *   dropped the kvm->lock, but hasn't reached kvm_arch_vcpu_create().
+	 *
+	 * The whole combination of this guarantees that no vCPU can get into
+	 * KVM with a VGIC configuration inconsistent with the VM's VGIC.
+	 */
+	if (kvm->created_vcpus != atomic_read(&kvm->online_vcpus))
+		goto out_unlock;
+
 	if (irqchip_in_kernel(kvm)) {
 		ret = -EEXIST;
 		goto out_unlock;
@@ -142,7 +167,7 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 
 out_unlock:
 	mutex_unlock(&kvm->arch.config_lock);
-	unlock_all_vcpus(kvm);
+	kvm_unlock_all_vcpus(kvm);
 	return ret;
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-its.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-its.c
index fb96802799c6..534049c7c94b 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-its.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-its.c
@@ -154,36 +154,6 @@ out_unlock:
 	return irq;
 }
 
-struct its_device {
-	struct list_head dev_list;
-
-	/* the head for the list of ITTEs */
-	struct list_head itt_head;
-	u32 num_eventid_bits;
-	gpa_t itt_addr;
-	u32 device_id;
-};
-
-#define COLLECTION_NOT_MAPPED ((u32)~0)
-
-struct its_collection {
-	struct list_head coll_list;
-
-	u32 collection_id;
-	u32 target_addr;
-};
-
-#define its_is_collection_mapped(coll) ((coll) && \
-				((coll)->target_addr != COLLECTION_NOT_MAPPED))
-
-struct its_ite {
-	struct list_head ite_list;
-
-	struct vgic_irq *irq;
-	struct its_collection *collection;
-	u32 event_id;
-};
-
 /**
  * struct vgic_its_abi - ITS abi ops and settings
  * @cte_esz: collection table entry size
@@ -336,39 +306,34 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
 		}
 	}
 
-	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
 	if (irq->hw)
-		return its_prop_update_vlpi(irq->host_irq, prop, needs_inv);
+		ret = its_prop_update_vlpi(irq->host_irq, prop, needs_inv);
 
-	return 0;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	return ret;
 }
 
 static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu)
 {
-	int ret = 0;
-	unsigned long flags;
+	struct its_vlpi_map map;
+	int ret;
 
-	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	guard(raw_spinlock_irqsave)(&irq->irq_lock);
 	irq->target_vcpu = vcpu;
-	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 
-	if (irq->hw) {
-		struct its_vlpi_map map;
+	if (!irq->hw)
+		return 0;
 
-		ret = its_get_vlpi(irq->host_irq, &map);
-		if (ret)
-			return ret;
+	ret = its_get_vlpi(irq->host_irq, &map);
+	if (ret)
+		return ret;
 
-		if (map.vpe)
-			atomic_dec(&map.vpe->vlpi_count);
-		map.vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
-		atomic_inc(&map.vpe->vlpi_count);
+	if (map.vpe)
+		atomic_dec(&map.vpe->vlpi_count);
 
-		ret = its_map_vlpi(irq->host_irq, &map);
-	}
-
-	return ret;
+	map.vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	atomic_inc(&map.vpe->vlpi_count);
+	return its_map_vlpi(irq->host_irq, &map);
 }
 
 static struct kvm_vcpu *collection_to_vcpu(struct kvm *kvm,
@@ -786,12 +751,17 @@ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi)
 /* Requires the its_lock to be held. */
 static void its_free_ite(struct kvm *kvm, struct its_ite *ite)
 {
+	struct vgic_irq *irq = ite->irq;
 	list_del(&ite->ite_list);
 
 	/* This put matches the get in vgic_add_lpi. */
-	if (ite->irq) {
-		if (ite->irq->hw)
-			WARN_ON(its_unmap_vlpi(ite->irq->host_irq));
+	if (irq) {
+		scoped_guard(raw_spinlock_irqsave, &irq->irq_lock) {
+			if (irq->hw)
+				WARN_ON(its_unmap_vlpi(ite->irq->host_irq));
+
+			irq->hw = false;
+		}
 
 		vgic_put_irq(kvm, ite->irq);
 	}
@@ -1938,6 +1908,8 @@ static void vgic_its_destroy(struct kvm_device *kvm_dev)
 
 	mutex_lock(&its->its_lock);
 
+	vgic_its_debug_destroy(kvm_dev);
+
 	vgic_its_free_device_list(kvm, its);
 	vgic_its_free_collection_list(kvm, its);
 	vgic_its_invalidate_cache(its);
@@ -1999,7 +1971,7 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
@@ -2034,7 +2006,7 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 	}
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 	return ret;
 }
@@ -2704,7 +2676,7 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 
 	mutex_lock(&kvm->lock);
 
-	if (!lock_all_vcpus(kvm)) {
+	if (kvm_trylock_all_vcpus(kvm)) {
 		mutex_unlock(&kvm->lock);
 		return -EBUSY;
 	}
@@ -2726,7 +2698,7 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 
 	mutex_unlock(&its->its_lock);
 	mutex_unlock(&kvm->arch.config_lock);
-	unlock_all_vcpus(kvm);
+	kvm_unlock_all_vcpus(kvm);
 	mutex_unlock(&kvm->lock);
 	return ret;
 }
@@ -2771,7 +2743,12 @@ static int vgic_its_set_attr(struct kvm_device *dev,
 		if (ret)
 			return ret;
 
-		return vgic_register_its_iodev(dev->kvm, its, addr);
+		ret = vgic_register_its_iodev(dev->kvm, its, addr);
+		if (ret)
+			return ret;
+
+		return vgic_its_debug_init(dev);
+
 	}
 	case KVM_DEV_ARM_VGIC_GRP_CTRL:
 		return vgic_its_ctrl(dev->kvm, its, attr->attr);
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 359094f68c23..f9ae790163fb 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -268,7 +268,7 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 				return -ENXIO;
 			mutex_lock(&dev->kvm->lock);
 
-			if (!lock_all_vcpus(dev->kvm)) {
+			if (kvm_trylock_all_vcpus(dev->kvm)) {
 				mutex_unlock(&dev->kvm->lock);
 				return -EBUSY;
 			}
@@ -276,7 +276,7 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 			mutex_lock(&dev->kvm->arch.config_lock);
 			r = vgic_v3_save_pending_tables(dev->kvm);
 			mutex_unlock(&dev->kvm->arch.config_lock);
-			unlock_all_vcpus(dev->kvm);
+			kvm_unlock_all_vcpus(dev->kvm);
 			mutex_unlock(&dev->kvm->lock);
 			return r;
 		}
@@ -390,7 +390,7 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
@@ -415,7 +415,7 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && !is_write)
@@ -554,7 +554,7 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
@@ -611,7 +611,7 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && uaccess && !is_write) {
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-v3-nested.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-v3-nested.c
index bfa5bde1f106..679aafe77de2 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-v3-nested.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-v3-nested.c
@@ -36,6 +36,11 @@ struct shadow_if {
 
 static DEFINE_PER_CPU(struct shadow_if, shadow_if);
 
+static int lr_map_idx_to_shadow_idx(struct shadow_if *shadow_if, int idx)
+{
+	return hweight16(shadow_if->lr_map & (BIT(idx) - 1));
+}
+
 /*
  * Nesting GICv3 support
  *
@@ -209,6 +214,29 @@ u64 vgic_v3_get_misr(struct kvm_vcpu *vcpu)
 	return reg;
 }
 
+static u64 translate_lr_pintid(struct kvm_vcpu *vcpu, u64 lr)
+{
+	struct vgic_irq *irq;
+
+	if (!(lr & ICH_LR_HW))
+		return lr;
+
+	/* We have the HW bit set, check for validity of pINTID */
+	irq = vgic_get_vcpu_irq(vcpu, FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
+	/* If there was no real mapping, nuke the HW bit */
+	if (!irq || !irq->hw || irq->intid > VGIC_MAX_SPI)
+		lr &= ~ICH_LR_HW;
+
+	/* Translate the virtual mapping to the real one, even if invalid */
+	if (irq) {
+		lr &= ~ICH_LR_PHYS_ID_MASK;
+		lr |= FIELD_PREP(ICH_LR_PHYS_ID_MASK, (u64)irq->hwintid);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return lr;
+}
+
 /*
  * For LRs which have HW bit set such as timer interrupts, we modify them to
  * have the host hardware interrupt number instead of the virtual one programmed
@@ -217,61 +245,37 @@ u64 vgic_v3_get_misr(struct kvm_vcpu *vcpu)
 static void vgic_v3_create_shadow_lr(struct kvm_vcpu *vcpu,
 				     struct vgic_v3_cpu_if *s_cpu_if)
 {
-	unsigned long lr_map = 0;
-	int index = 0;
+	struct shadow_if *shadow_if;
+
+	shadow_if = container_of(s_cpu_if, struct shadow_if, cpuif);
+	shadow_if->lr_map = 0;
 
 	for (int i = 0; i < kvm_vgic_global_state.nr_lr; i++) {
 		u64 lr = __vcpu_sys_reg(vcpu, ICH_LRN(i));
-		struct vgic_irq *irq;
 
 		if (!(lr & ICH_LR_STATE))
-			lr = 0;
-
-		if (!(lr & ICH_LR_HW))
-			goto next;
-
-		/* We have the HW bit set, check for validity of pINTID */
-		irq = vgic_get_vcpu_irq(vcpu, FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
-		if (!irq || !irq->hw || irq->intid > VGIC_MAX_SPI ) {
-			/* There was no real mapping, so nuke the HW bit */
-			lr &= ~ICH_LR_HW;
-			if (irq)
-				vgic_put_irq(vcpu->kvm, irq);
-			goto next;
-		}
-
-		/* It is illegal to have the EOI bit set with HW */
-		lr &= ~ICH_LR_EOI;
-
-		/* Translate the virtual mapping to the real one */
-		lr &= ~ICH_LR_PHYS_ID_MASK;
-		lr |= FIELD_PREP(ICH_LR_PHYS_ID_MASK, (u64)irq->hwintid);
+			continue;
 
-		vgic_put_irq(vcpu->kvm, irq);
+		lr = translate_lr_pintid(vcpu, lr);
 
-next:
-		s_cpu_if->vgic_lr[index] = lr;
-		if (lr) {
-			lr_map |= BIT(i);
-			index++;
-		}
+		s_cpu_if->vgic_lr[hweight16(shadow_if->lr_map)] = lr;
+		shadow_if->lr_map |= BIT(i);
 	}
 
-	container_of(s_cpu_if, struct shadow_if, cpuif)->lr_map = lr_map;
-	s_cpu_if->used_lrs = index;
+	s_cpu_if->used_lrs = hweight16(shadow_if->lr_map);
 }
 
 void vgic_v3_sync_nested(struct kvm_vcpu *vcpu)
 {
 	struct shadow_if *shadow_if = get_shadow_if();
-	int i, index = 0;
+	int i;
 
 	for_each_set_bit(i, &shadow_if->lr_map, kvm_vgic_global_state.nr_lr) {
 		u64 lr = __vcpu_sys_reg(vcpu, ICH_LRN(i));
 		struct vgic_irq *irq;
 
 		if (!(lr & ICH_LR_HW) || !(lr & ICH_LR_STATE))
-			goto next;
+			continue;
 
 		/*
 		 * If we had a HW lr programmed by the guest hypervisor, we
@@ -280,15 +284,13 @@ void vgic_v3_sync_nested(struct kvm_vcpu *vcpu)
 		 */
 		irq = vgic_get_vcpu_irq(vcpu, FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
 		if (WARN_ON(!irq)) /* Shouldn't happen as we check on load */
-			goto next;
+			continue;
 
-		lr = __gic_v3_get_lr(index);
+		lr = __gic_v3_get_lr(lr_map_idx_to_shadow_idx(shadow_if, i));
 		if (!(lr & ICH_LR_STATE))
 			irq->active = false;
 
 		vgic_put_irq(vcpu->kvm, irq);
-	next:
-		index++;
 	}
 }
 
@@ -359,25 +361,23 @@ void vgic_v3_put_nested(struct kvm_vcpu *vcpu)
 	val = __vcpu_sys_reg(vcpu, ICH_HCR_EL2);
 	val &= ~ICH_HCR_EL2_EOIcount_MASK;
 	val |= (s_cpu_if->vgic_hcr & ICH_HCR_EL2_EOIcount_MASK);
-	__vcpu_sys_reg(vcpu, ICH_HCR_EL2) = val;
-	__vcpu_sys_reg(vcpu, ICH_VMCR_EL2) = s_cpu_if->vgic_vmcr;
+	__vcpu_assign_sys_reg(vcpu, ICH_HCR_EL2, val);
+	__vcpu_assign_sys_reg(vcpu, ICH_VMCR_EL2, s_cpu_if->vgic_vmcr);
 
 	for (i = 0; i < 4; i++) {
-		__vcpu_sys_reg(vcpu, ICH_AP0RN(i)) = s_cpu_if->vgic_ap0r[i];
-		__vcpu_sys_reg(vcpu, ICH_AP1RN(i)) = s_cpu_if->vgic_ap1r[i];
+		__vcpu_assign_sys_reg(vcpu, ICH_AP0RN(i), s_cpu_if->vgic_ap0r[i]);
+		__vcpu_assign_sys_reg(vcpu, ICH_AP1RN(i), s_cpu_if->vgic_ap1r[i]);
 	}
 
 	for_each_set_bit(i, &shadow_if->lr_map, kvm_vgic_global_state.nr_lr) {
 		val = __vcpu_sys_reg(vcpu, ICH_LRN(i));
 
 		val &= ~ICH_LR_STATE;
-		val |= s_cpu_if->vgic_lr[i] & ICH_LR_STATE;
+		val |= s_cpu_if->vgic_lr[lr_map_idx_to_shadow_idx(shadow_if, i)] & ICH_LR_STATE;
 
-		__vcpu_sys_reg(vcpu, ICH_LRN(i)) = val;
-		s_cpu_if->vgic_lr[i] = 0;
+		__vcpu_assign_sys_reg(vcpu, ICH_LRN(i), val);
 	}
 
-	shadow_if->lr_map = 0;
 	vcpu->arch.vgic_cpu.vgic_v3.used_lrs = 0;
 }
 
@@ -401,9 +401,7 @@ void vgic_v3_nested_update_mi(struct kvm_vcpu *vcpu)
 {
 	bool level;
 
-	level  = __vcpu_sys_reg(vcpu, ICH_HCR_EL2) & ICH_HCR_EL2_En;
-	if (level)
-		level &= vgic_v3_get_misr(vcpu);
+	level = (__vcpu_sys_reg(vcpu, ICH_HCR_EL2) & ICH_HCR_EL2_En) && vgic_v3_get_misr(vcpu);
 	kvm_vgic_inject_irq(vcpu->kvm, vcpu,
 			    vcpu->kvm->arch.vgic.mi_intid, level, vcpu);
 }
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-v4.c linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-v4.c
index c7de6154627c..193946108192 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic-v4.c
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic-v4.c
@@ -444,7 +444,7 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 	if (IS_ERR(its))
 		return 0;
 
-	mutex_lock(&its->its_lock);
+	guard(mutex)(&its->its_lock);
 
 	/*
 	 * Perform the actual DevID/EventID -> LPI translation.
@@ -455,11 +455,13 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 	 */
 	if (vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
 				 irq_entry->msi.data, &irq))
-		goto out;
+		return 0;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
 	/* Silently exit if the vLPI is already mapped */
 	if (irq->hw)
-		goto out;
+		goto out_unlock_irq;
 
 	/*
 	 * Emit the mapping request. If it fails, the ITS probably
@@ -479,68 +481,74 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 
 	ret = its_map_vlpi(virq, &map);
 	if (ret)
-		goto out;
+		goto out_unlock_irq;
 
 	irq->hw		= true;
 	irq->host_irq	= virq;
 	atomic_inc(&map.vpe->vlpi_count);
 
 	/* Transfer pending state */
-	raw_spin_lock_irqsave(&irq->irq_lock, flags);
-	if (irq->pending_latch) {
-		ret = irq_set_irqchip_state(irq->host_irq,
-					    IRQCHIP_STATE_PENDING,
-					    irq->pending_latch);
-		WARN_RATELIMIT(ret, "IRQ %d", irq->host_irq);
+	if (!irq->pending_latch)
+		goto out_unlock_irq;
 
-		/*
-		 * Clear pending_latch and communicate this state
-		 * change via vgic_queue_irq_unlock.
-		 */
-		irq->pending_latch = false;
-		vgic_queue_irq_unlock(kvm, irq, flags);
-	} else {
-		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-	}
+	ret = irq_set_irqchip_state(irq->host_irq, IRQCHIP_STATE_PENDING,
+				    irq->pending_latch);
+	WARN_RATELIMIT(ret, "IRQ %d", irq->host_irq);
 
-out:
-	mutex_unlock(&its->its_lock);
+	/*
+	 * Clear pending_latch and communicate this state
+	 * change via vgic_queue_irq_unlock.
+	 */
+	irq->pending_latch = false;
+	vgic_queue_irq_unlock(kvm, irq, flags);
+	return ret;
+
+out_unlock_irq:
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 	return ret;
 }
 
-int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int virq,
-				 struct kvm_kernel_irq_routing_entry *irq_entry)
+static struct vgic_irq *__vgic_host_irq_get_vlpi(struct kvm *kvm, int host_irq)
 {
-	struct vgic_its *its;
 	struct vgic_irq *irq;
-	int ret;
+	unsigned long idx;
+
+	guard(rcu)();
+	xa_for_each(&kvm->arch.vgic.lpi_xa, idx, irq) {
+		if (!irq->hw || irq->host_irq != host_irq)
+			continue;
+
+		if (!vgic_try_get_irq_kref(irq))
+			return NULL;
+
+		return irq;
+	}
+
+	return NULL;
+}
+
+int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int host_irq)
+{
+	struct vgic_irq *irq;
+	unsigned long flags;
+	int ret = 0;
 
 	if (!vgic_supports_direct_msis(kvm))
 		return 0;
 
-	/*
-	 * Get the ITS, and escape early on error (not a valid
-	 * doorbell for any of our vITSs).
-	 */
-	its = vgic_get_its(kvm, irq_entry);
-	if (IS_ERR(its))
+	irq = __vgic_host_irq_get_vlpi(kvm, host_irq);
+	if (!irq)
 		return 0;
 
-	mutex_lock(&its->its_lock);
-
-	ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
-				   irq_entry->msi.data, &irq);
-	if (ret)
-		goto out;
-
-	WARN_ON(irq->hw && irq->host_irq != virq);
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	WARN_ON(irq->hw && irq->host_irq != host_irq);
 	if (irq->hw) {
 		atomic_dec(&irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vlpi_count);
 		irq->hw = false;
-		ret = its_unmap_vlpi(virq);
+		ret = its_unmap_vlpi(host_irq);
 	}
 
-out:
-	mutex_unlock(&its->its_lock);
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(kvm, irq);
 	return ret;
 }
diff --git linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic.h linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic.h
index 0c5a63712702..4349084cb9a6 100644
--- linux-libre-6.15-gnu/arch/arm64/kvm/vgic/vgic.h
+++ linux-libre-6.16-gnu/arch/arm64/kvm/vgic/vgic.h
@@ -172,6 +172,36 @@ struct vgic_reg_attr {
 	gpa_t addr;
 };
 
+struct its_device {
+	struct list_head dev_list;
+
+	/* the head for the list of ITTEs */
+	struct list_head itt_head;
+	u32 num_eventid_bits;
+	gpa_t itt_addr;
+	u32 device_id;
+};
+
+#define COLLECTION_NOT_MAPPED ((u32)~0)
+
+struct its_collection {
+	struct list_head coll_list;
+
+	u32 collection_id;
+	u32 target_addr;
+};
+
+#define its_is_collection_mapped(coll) ((coll) && \
+				((coll)->target_addr != COLLECTION_NOT_MAPPED))
+
+struct its_ite {
+	struct list_head ite_list;
+
+	struct vgic_irq *irq;
+	struct its_collection *collection;
+	u32 event_id;
+};
+
 int vgic_v3_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 		       struct vgic_reg_attr *reg_attr);
 int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
@@ -359,4 +389,7 @@ void vgic_v3_put_nested(struct kvm_vcpu *vcpu);
 void vgic_v3_handle_nested_maint_irq(struct kvm_vcpu *vcpu);
 void vgic_v3_nested_update_mi(struct kvm_vcpu *vcpu);
 
+int vgic_its_debug_init(struct kvm_device *dev);
+void vgic_its_debug_destroy(struct kvm_device *dev);
+
 #endif
diff --git linux-libre-6.15-gnu/arch/arm64/lib/Makefile linux-libre-6.16-gnu/arch/arm64/lib/Makefile
index 4d49dff721a8..027bfa9689c6 100644
--- linux-libre-6.15-gnu/arch/arm64/lib/Makefile
+++ linux-libre-6.16-gnu/arch/arm64/lib/Makefile
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
+
+obj-y += crypto/
+
 lib-y		:= clear_user.o delay.o copy_from_user.o		\
 		   copy_to_user.o copy_page.o				\
 		   clear_page.o csum.o insn.o memchr.o memcpy.o		\
@@ -14,10 +17,10 @@ endif
 lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o
 
 obj-$(CONFIG_CRC32_ARCH) += crc32-arm64.o
-crc32-arm64-y := crc32.o crc32-glue.o
+crc32-arm64-y := crc32.o crc32-core.o
 
 obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-arm64.o
-crc-t10dif-arm64-y := crc-t10dif-glue.o crc-t10dif-core.o
+crc-t10dif-arm64-y := crc-t10dif.o crc-t10dif-core.o
 
 obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
 
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crc-t10dif-glue.c linux-libre-6.16-gnu/arch/arm64/lib/crc-t10dif.c
similarity index 91%
rename from arch/arm64/lib/crc-t10dif-glue.c
rename to arch/arm64/lib/crc-t10dif.c
index bacd18f23168..c2ffe4fdb59d 100644
--- linux-libre-6.15-gnu/arch/arm64/lib/crc-t10dif-glue.c
+++ linux-libre-6.16-gnu/arch/arm64/lib/crc-t10dif.c
@@ -17,8 +17,8 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 
-static DEFINE_STATIC_KEY_FALSE(have_asimd);
-static DEFINE_STATIC_KEY_FALSE(have_pmull);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_asimd);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_pmull);
 
 #define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
 
@@ -61,7 +61,7 @@ static int __init crc_t10dif_arm64_init(void)
 	}
 	return 0;
 }
-arch_initcall(crc_t10dif_arm64_init);
+subsys_initcall(crc_t10dif_arm64_init);
 
 static void __exit crc_t10dif_arm64_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crc32.S linux-libre-6.16-gnu/arch/arm64/lib/crc32-core.S
similarity index 100%
rename from arch/arm64/lib/crc32.S
rename to arch/arm64/lib/crc32-core.S
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crc32-glue.c linux-libre-6.16-gnu/arch/arm64/lib/crc32.c
similarity index 100%
rename from arch/arm64/lib/crc32-glue.c
rename to arch/arm64/lib/crc32.c
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/.gitignore linux-libre-6.16-gnu/arch/arm64/lib/crypto/.gitignore
new file mode 100644
index 000000000000..12d74d8b03d0
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+poly1305-core.S
+sha256-core.S
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/Kconfig linux-libre-6.16-gnu/arch/arm64/lib/crypto/Kconfig
new file mode 100644
index 000000000000..129a7685cb4c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CRYPTO_CHACHA20_NEON
+	tristate
+	depends on KERNEL_MODE_NEON
+	default CRYPTO_LIB_CHACHA
+	select CRYPTO_LIB_CHACHA_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+
+config CRYPTO_POLY1305_NEON
+	tristate
+	depends on KERNEL_MODE_NEON
+	default CRYPTO_LIB_POLY1305
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+
+config CRYPTO_SHA256_ARM64
+	tristate
+	default CRYPTO_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/Makefile linux-libre-6.16-gnu/arch/arm64/lib/crypto/Makefile
new file mode 100644
index 000000000000..946c09903711
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
+chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
+
+obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
+poly1305-neon-y := poly1305-core.o poly1305-glue.o
+AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_block_init_arch
+AFLAGS_poly1305-core.o += -Dpoly1305_emit=poly1305_emit_arch
+
+obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o
+sha256-arm64-y := sha256.o sha256-core.o
+sha256-arm64-$(CONFIG_KERNEL_MODE_NEON) += sha256-ce.o
+
+quiet_cmd_perlasm = PERLASM $@
+      cmd_perlasm = $(PERL) $(<) void $(@)
+
+$(obj)/%-core.S: $(src)/%-armv8.pl
+	$(call cmd,perlasm)
+
+$(obj)/sha256-core.S: $(src)/sha2-armv8.pl
+	$(call cmd,perlasm)
+
+clean-files += poly1305-core.S sha256-core.S
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/chacha-neon-core.S linux-libre-6.16-gnu/arch/arm64/lib/crypto/chacha-neon-core.S
similarity index 99%
rename from arch/arm64/crypto/chacha-neon-core.S
rename to arch/arm64/lib/crypto/chacha-neon-core.S
index b70ac76f2610..80079586ecc7 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/chacha-neon-core.S
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/chacha-neon-core.S
@@ -1,5 +1,5 @@
 /*
- * ChaCha/XChaCha NEON helper functions
+ * ChaCha/HChaCha NEON helper functions
  *
  * Copyright (C) 2016-2018 Linaro, Ltd. <ard.biesheuvel@linaro.org>
  *
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/chacha-neon-glue.c linux-libre-6.16-gnu/arch/arm64/lib/crypto/chacha-neon-glue.c
new file mode 100644
index 000000000000..d0188f974ca5
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/chacha-neon-glue.c
@@ -0,0 +1,119 @@
+/*
+ * ChaCha and HChaCha functions (ARM64 optimized)
+ *
+ * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on:
+ * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <crypto/chacha.h>
+#include <crypto/internal/simd.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+
+asmlinkage void chacha_block_xor_neon(const struct chacha_state *state,
+				      u8 *dst, const u8 *src, int nrounds);
+asmlinkage void chacha_4block_xor_neon(const struct chacha_state *state,
+				       u8 *dst, const u8 *src,
+				       int nrounds, int bytes);
+asmlinkage void hchacha_block_neon(const struct chacha_state *state,
+				   u32 out[HCHACHA_OUT_WORDS], int nrounds);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+
+static void chacha_doneon(struct chacha_state *state, u8 *dst, const u8 *src,
+			  int bytes, int nrounds)
+{
+	while (bytes > 0) {
+		int l = min(bytes, CHACHA_BLOCK_SIZE * 5);
+
+		if (l <= CHACHA_BLOCK_SIZE) {
+			u8 buf[CHACHA_BLOCK_SIZE];
+
+			memcpy(buf, src, l);
+			chacha_block_xor_neon(state, buf, buf, nrounds);
+			memcpy(dst, buf, l);
+			state->x[12] += 1;
+			break;
+		}
+		chacha_4block_xor_neon(state, dst, src, nrounds, l);
+		bytes -= l;
+		src += l;
+		dst += l;
+		state->x[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
+	}
+}
+
+void hchacha_block_arch(const struct chacha_state *state,
+			u32 out[HCHACHA_OUT_WORDS], int nrounds)
+{
+	if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) {
+		hchacha_block_generic(state, out, nrounds);
+	} else {
+		kernel_neon_begin();
+		hchacha_block_neon(state, out, nrounds);
+		kernel_neon_end();
+	}
+}
+EXPORT_SYMBOL(hchacha_block_arch);
+
+void chacha_crypt_arch(struct chacha_state *state, u8 *dst, const u8 *src,
+		       unsigned int bytes, int nrounds)
+{
+	if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE ||
+	    !crypto_simd_usable())
+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
+
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_neon_begin();
+		chacha_doneon(state, dst, src, todo, nrounds);
+		kernel_neon_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
+}
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+bool chacha_is_arch_optimized(void)
+{
+	return static_key_enabled(&have_neon);
+}
+EXPORT_SYMBOL(chacha_is_arch_optimized);
+
+static int __init chacha_simd_mod_init(void)
+{
+	if (cpu_have_named_feature(ASIMD))
+		static_branch_enable(&have_neon);
+	return 0;
+}
+subsys_initcall(chacha_simd_mod_init);
+
+static void __exit chacha_simd_mod_exit(void)
+{
+}
+module_exit(chacha_simd_mod_exit);
+
+MODULE_DESCRIPTION("ChaCha and HChaCha functions (ARM64 optimized)");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/poly1305-armv8.pl linux-libre-6.16-gnu/arch/arm64/lib/crypto/poly1305-armv8.pl
similarity index 100%
rename from arch/arm64/crypto/poly1305-armv8.pl
rename to arch/arm64/lib/crypto/poly1305-armv8.pl
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/arm64/lib/crypto/poly1305-glue.c
new file mode 100644
index 000000000000..c9a74766785b
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/poly1305-glue.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64
+ *
+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <crypto/internal/poly1305.h>
+#include <linux/cpufeature.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unaligned.h>
+
+asmlinkage void poly1305_block_init_arch(
+	struct poly1305_block_state *state,
+	const u8 raw_key[POLY1305_BLOCK_SIZE]);
+EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
+asmlinkage void poly1305_blocks(struct poly1305_block_state *state,
+				const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_blocks_neon(struct poly1305_block_state *state,
+				     const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_emit_arch(const struct poly1305_state *state,
+				   u8 digest[POLY1305_DIGEST_SIZE],
+				   const u32 nonce[4]);
+EXPORT_SYMBOL_GPL(poly1305_emit_arch);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+
+void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
+			  unsigned int len, u32 padbit)
+{
+	len = round_down(len, POLY1305_BLOCK_SIZE);
+	if (static_branch_likely(&have_neon)) {
+		do {
+			unsigned int todo = min_t(unsigned int, len, SZ_4K);
+
+			kernel_neon_begin();
+			poly1305_blocks_neon(state, src, todo, padbit);
+			kernel_neon_end();
+
+			len -= todo;
+			src += todo;
+		} while (len);
+	} else
+		poly1305_blocks(state, src, len, padbit);
+}
+EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
+
+bool poly1305_is_arch_optimized(void)
+{
+	/* We always can use at least the ARM64 scalar implementation. */
+	return true;
+}
+EXPORT_SYMBOL(poly1305_is_arch_optimized);
+
+static int __init neon_poly1305_mod_init(void)
+{
+	if (cpu_have_named_feature(ASIMD))
+		static_branch_enable(&have_neon);
+	return 0;
+}
+subsys_initcall(neon_poly1305_mod_init);
+
+static void __exit neon_poly1305_mod_exit(void)
+{
+}
+module_exit(neon_poly1305_mod_exit);
+
+MODULE_DESCRIPTION("Poly1305 authenticator (ARM64 optimized)");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha512-armv8.pl linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha2-armv8.pl
similarity index 99%
rename from arch/arm64/crypto/sha512-armv8.pl
rename to arch/arm64/lib/crypto/sha2-armv8.pl
index 35ec9ae99fe1..4aebd20c498b 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha512-armv8.pl
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha2-armv8.pl
@@ -95,7 +95,7 @@ if ($output =~ /512/) {
 	$reg_t="w";
 }
 
-$func="sha${BITS}_block_data_order";
+$func="sha${BITS}_blocks_arch";
 
 ($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
 
diff --git linux-libre-6.15-gnu/arch/arm64/crypto/sha2-ce-core.S linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha256-ce.S
similarity index 80%
rename from arch/arm64/crypto/sha2-ce-core.S
rename to arch/arm64/lib/crypto/sha256-ce.S
index fce84d88ddb2..f3e21c6d87d2 100644
--- linux-libre-6.15-gnu/arch/arm64/crypto/sha2-ce-core.S
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha256-ce.S
@@ -71,8 +71,8 @@
 	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
 
 	/*
-	 * int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-	 *			     int blocks)
+	 * size_t __sha256_ce_transform(u32 state[SHA256_STATE_WORDS],
+	 *				const u8 *data, size_t nblocks);
 	 */
 	.text
 SYM_FUNC_START(__sha256_ce_transform)
@@ -86,20 +86,16 @@ SYM_FUNC_START(__sha256_ce_transform)
 	/* load state */
 	ld1		{dgav.4s, dgbv.4s}, [x0]
 
-	/* load sha256_ce_state::finalize */
-	ldr_l		w4, sha256_ce_offsetof_finalize, x4
-	ldr		w4, [x0, x4]
-
 	/* load input */
 0:	ld1		{v16.4s-v19.4s}, [x1], #64
-	sub		w2, w2, #1
+	sub		x2, x2, #1
 
 CPU_LE(	rev32		v16.16b, v16.16b	)
 CPU_LE(	rev32		v17.16b, v17.16b	)
 CPU_LE(	rev32		v18.16b, v18.16b	)
 CPU_LE(	rev32		v19.16b, v19.16b	)
 
-1:	add		t0.4s, v16.4s, v0.4s
+	add		t0.4s, v16.4s, v0.4s
 	mov		dg0v.16b, dgav.16b
 	mov		dg1v.16b, dgbv.16b
 
@@ -127,31 +123,14 @@ CPU_LE(	rev32		v19.16b, v19.16b	)
 	add		dgav.4s, dgav.4s, dg0v.4s
 	add		dgbv.4s, dgbv.4s, dg1v.4s
 
-	/* handled all input blocks? */
-	cbz		w2, 2f
-	cond_yield	3f, x5, x6
-	b		0b
+	/* return early if voluntary preemption is needed */
+	cond_yield	1f, x5, x6
 
-	/*
-	 * Final block: add padding and total bit count.
-	 * Skip if the input size was not a round multiple of the block size,
-	 * the padding is handled by the C code in that case.
-	 */
-2:	cbz		x4, 3f
-	ldr_l		w4, sha256_ce_offsetof_count, x4
-	ldr		x4, [x0, x4]
-	movi		v17.2d, #0
-	mov		x8, #0x80000000
-	movi		v18.2d, #0
-	ror		x7, x4, #29		// ror(lsl(x4, 3), 32)
-	fmov		d16, x8
-	mov		x4, #0
-	mov		v19.d[0], xzr
-	mov		v19.d[1], x7
-	b		1b
+	/* handled all input blocks? */
+	cbnz		x2, 0b
 
 	/* store new state */
-3:	st1		{dgav.4s, dgbv.4s}, [x0]
-	mov		w0, w2
+1:	st1		{dgav.4s, dgbv.4s}, [x0]
+	mov		x0, x2
 	ret
 SYM_FUNC_END(__sha256_ce_transform)
diff --git linux-libre-6.15-gnu/arch/arm64/lib/crypto/sha256.c linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha256.c
new file mode 100644
index 000000000000..bcf7a3adc0c4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/arm64/lib/crypto/sha256.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SHA-256 optimized for ARM64
+ *
+ * Copyright 2025 Google LLC
+ */
+#include <asm/neon.h>
+#include <crypto/internal/sha2.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+asmlinkage void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS],
+				   const u8 *data, size_t nblocks);
+EXPORT_SYMBOL_GPL(sha256_blocks_arch);
+asmlinkage void sha256_block_neon(u32 state[SHA256_STATE_WORDS],
+				  const u8 *data, size_t nblocks);
+asmlinkage size_t __sha256_ce_transform(u32 state[SHA256_STATE_WORDS],
+					const u8 *data, size_t nblocks);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_ce);
+
+void sha256_blocks_simd(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
+	    static_branch_likely(&have_neon)) {
+		if (static_branch_likely(&have_ce)) {
+			do {
+				size_t rem;
+
+				kernel_neon_begin();
+				rem = __sha256_ce_transform(state,
+							    data, nblocks);
+				kernel_neon_end();
+				data += (nblocks - rem) * SHA256_BLOCK_SIZE;
+				nblocks = rem;
+			} while (nblocks);
+		} else {
+			kernel_neon_begin();
+			sha256_block_neon(state, data, nblocks);
+			kernel_neon_end();
+		}
+	} else {
+		sha256_blocks_arch(state, data, nblocks);
+	}
+}
+EXPORT_SYMBOL_GPL(sha256_blocks_simd);
+
+bool sha256_is_arch_optimized(void)
+{
+	/* We always can use at least the ARM64 scalar implementation. */
+	return true;
+}
+EXPORT_SYMBOL_GPL(sha256_is_arch_optimized);
+
+static int __init sha256_arm64_mod_init(void)
+{
+	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
+	    cpu_have_named_feature(ASIMD)) {
+		static_branch_enable(&have_neon);
+		if (cpu_have_named_feature(SHA2))
+			static_branch_enable(&have_ce);
+	}
+	return 0;
+}
+subsys_initcall(sha256_arm64_mod_init);
+
+static void __exit sha256_arm64_mod_exit(void)
+{
+}
+module_exit(sha256_arm64_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-256 optimized for ARM64");
diff --git linux-libre-6.15-gnu/arch/arm64/lib/xor-neon.c linux-libre-6.16-gnu/arch/arm64/lib/xor-neon.c
index f9a53b7f9842..8fffebfa17b2 100644
--- linux-libre-6.15-gnu/arch/arm64/lib/xor-neon.c
+++ linux-libre-6.16-gnu/arch/arm64/lib/xor-neon.c
@@ -319,7 +319,7 @@ static void xor_arm64_eor3_5(unsigned long bytes,
 
 static int __init xor_neon_init(void)
 {
-	if (IS_ENABLED(CONFIG_AS_HAS_SHA3) && cpu_have_named_feature(SHA3)) {
+	if (cpu_have_named_feature(SHA3)) {
 		xor_block_inner_neon.do_3 = xor_arm64_eor3_3;
 		xor_block_inner_neon.do_4 = xor_arm64_eor3_4;
 		xor_block_inner_neon.do_5 = xor_arm64_eor3_5;
diff --git linux-libre-6.15-gnu/arch/arm64/mm/fault.c linux-libre-6.16-gnu/arch/arm64/mm/fault.c
index ec0a337891dd..11eb8d1adc84 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/fault.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/fault.c
@@ -487,17 +487,29 @@ static void do_bad_area(unsigned long far, unsigned long esr,
 	}
 }
 
-static bool fault_from_pkey(unsigned long esr, struct vm_area_struct *vma,
-			unsigned int mm_flags)
+static bool fault_from_pkey(struct vm_area_struct *vma, unsigned int mm_flags)
 {
-	unsigned long iss2 = ESR_ELx_ISS2(esr);
-
 	if (!system_supports_poe())
 		return false;
 
-	if (esr_fsc_is_permission_fault(esr) && (iss2 & ESR_ELx_Overlay))
-		return true;
-
+	/*
+	 * We do not check whether an Overlay fault has occurred because we
+	 * cannot make a decision based solely on its value:
+	 *
+	 * - If Overlay is set, a fault did occur due to POE, but it may be
+	 *   spurious in those cases where we update POR_EL0 without ISB (e.g.
+	 *   on context-switch). We would then need to manually check POR_EL0
+	 *   against vma_pkey(vma), which is exactly what
+	 *   arch_vma_access_permitted() does.
+	 *
+	 * - If Overlay is not set, we may still need to report a pkey fault.
+	 *   This is the case if an access was made within a mapping but with no
+	 *   page mapped, and POR_EL0 forbids the access (according to
+	 *   vma_pkey()). Such access will result in a SIGSEGV regardless
+	 *   because core code checks arch_vma_access_permitted(), but in order
+	 *   to report the correct error code - SEGV_PKUERR - we must handle
+	 *   that case here.
+	 */
 	return !arch_vma_access_permitted(vma,
 			mm_flags & FAULT_FLAG_WRITE,
 			mm_flags & FAULT_FLAG_INSTRUCTION,
@@ -635,7 +647,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 		goto bad_area;
 	}
 
-	if (fault_from_pkey(esr, vma, mm_flags)) {
+	if (fault_from_pkey(vma, mm_flags)) {
 		pkey = vma_pkey(vma);
 		vma_end_read(vma);
 		fault = 0;
@@ -679,7 +691,7 @@ retry:
 		goto bad_area;
 	}
 
-	if (fault_from_pkey(esr, vma, mm_flags)) {
+	if (fault_from_pkey(vma, mm_flags)) {
 		pkey = vma_pkey(vma);
 		mmap_read_unlock(mm);
 		fault = 0;
diff --git linux-libre-6.15-gnu/arch/arm64/mm/hugetlbpage.c linux-libre-6.16-gnu/arch/arm64/mm/hugetlbpage.c
index cfe8cb8ba1cc..0c8737f4f2ce 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/hugetlbpage.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/hugetlbpage.c
@@ -129,7 +129,7 @@ pte_t huge_ptep_get(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 	if (!pte_present(orig_pte) || !pte_cont(orig_pte))
 		return orig_pte;
 
-	ncontig = num_contig_ptes(page_size(pte_page(orig_pte)), &pgsize);
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
 	for (i = 0; i < ncontig; i++, ptep++) {
 		pte_t pte = __ptep_get(ptep);
 
@@ -159,12 +159,11 @@ static pte_t get_clear_contig(struct mm_struct *mm,
 	pte_t pte, tmp_pte;
 	bool present;
 
-	pte = __ptep_get_and_clear(mm, addr, ptep);
+	pte = __ptep_get_and_clear_anysz(mm, ptep, pgsize);
 	present = pte_present(pte);
 	while (--ncontig) {
 		ptep++;
-		addr += pgsize;
-		tmp_pte = __ptep_get_and_clear(mm, addr, ptep);
+		tmp_pte = __ptep_get_and_clear_anysz(mm, ptep, pgsize);
 		if (present) {
 			if (pte_dirty(tmp_pte))
 				pte = pte_mkdirty(pte);
@@ -183,8 +182,9 @@ static pte_t get_clear_contig_flush(struct mm_struct *mm,
 {
 	pte_t orig_pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
 	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
+	unsigned long end = addr + (pgsize * ncontig);
 
-	flush_tlb_range(&vma, addr, addr + (pgsize * ncontig));
+	__flush_hugetlb_tlb_range(&vma, addr, end, pgsize, true);
 	return orig_pte;
 }
 
@@ -207,9 +207,12 @@ static void clear_flush(struct mm_struct *mm,
 	unsigned long i, saddr = addr;
 
 	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
-		__ptep_get_and_clear(mm, addr, ptep);
+		__ptep_get_and_clear_anysz(mm, ptep, pgsize);
 
-	flush_tlb_range(&vma, saddr, addr);
+	if (mm == &init_mm)
+		flush_tlb_kernel_range(saddr, addr);
+	else
+		__flush_hugetlb_tlb_range(&vma, saddr, addr, pgsize, true);
 }
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -218,30 +221,20 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 	size_t pgsize;
 	int i;
 	int ncontig;
-	unsigned long pfn, dpfn;
-	pgprot_t hugeprot;
 
 	ncontig = num_contig_ptes(sz, &pgsize);
 
 	if (!pte_present(pte)) {
 		for (i = 0; i < ncontig; i++, ptep++, addr += pgsize)
-			__set_ptes(mm, addr, ptep, pte, 1);
-		return;
-	}
-
-	if (!pte_cont(pte)) {
-		__set_ptes(mm, addr, ptep, pte, 1);
+			__set_ptes_anysz(mm, ptep, pte, 1, pgsize);
 		return;
 	}
 
-	pfn = pte_pfn(pte);
-	dpfn = pgsize >> PAGE_SHIFT;
-	hugeprot = pte_pgprot(pte);
-
-	clear_flush(mm, addr, ptep, pgsize, ncontig);
+	/* Only need to "break" if transitioning valid -> valid. */
+	if (pte_cont(pte) && pte_valid(__ptep_get(ptep)))
+		clear_flush(mm, addr, ptep, pgsize, ncontig);
 
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 }
 
 pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
@@ -431,23 +424,23 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 			       unsigned long addr, pte_t *ptep,
 			       pte_t pte, int dirty)
 {
-	int ncontig, i;
+	int ncontig;
 	size_t pgsize = 0;
-	unsigned long pfn = pte_pfn(pte), dpfn;
 	struct mm_struct *mm = vma->vm_mm;
-	pgprot_t hugeprot;
 	pte_t orig_pte;
 
+	VM_WARN_ON(!pte_present(pte));
+
 	if (!pte_cont(pte))
 		return __ptep_set_access_flags(vma, addr, ptep, pte, dirty);
 
-	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
-	dpfn = pgsize >> PAGE_SHIFT;
+	ncontig = num_contig_ptes(huge_page_size(hstate_vma(vma)), &pgsize);
 
 	if (!__cont_access_flags_changed(ptep, pte, ncontig))
 		return 0;
 
 	orig_pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+	VM_WARN_ON(!pte_present(orig_pte));
 
 	/* Make sure we don't lose the dirty or young state */
 	if (pte_dirty(orig_pte))
@@ -456,38 +449,31 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 	if (pte_young(orig_pte))
 		pte = pte_mkyoung(pte);
 
-	hugeprot = pte_pgprot(pte);
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
-
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 	return 1;
 }
 
 void huge_ptep_set_wrprotect(struct mm_struct *mm,
 			     unsigned long addr, pte_t *ptep)
 {
-	unsigned long pfn, dpfn;
-	pgprot_t hugeprot;
-	int ncontig, i;
+	int ncontig;
 	size_t pgsize;
 	pte_t pte;
 
-	if (!pte_cont(__ptep_get(ptep))) {
+	pte = __ptep_get(ptep);
+	VM_WARN_ON(!pte_present(pte));
+
+	if (!pte_cont(pte)) {
 		__ptep_set_wrprotect(mm, addr, ptep);
 		return;
 	}
 
 	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
-	dpfn = pgsize >> PAGE_SHIFT;
 
 	pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
 	pte = pte_wrprotect(pte);
 
-	hugeprot = pte_pgprot(pte);
-	pfn = pte_pfn(pte);
-
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 }
 
 pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
@@ -497,10 +483,7 @@ pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
 	size_t pgsize;
 	int ncontig;
 
-	if (!pte_cont(__ptep_get(ptep)))
-		return ptep_clear_flush(vma, addr, ptep);
-
-	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+	ncontig = num_contig_ptes(huge_page_size(hstate_vma(vma)), &pgsize);
 	return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
 }
 
diff --git linux-libre-6.15-gnu/arch/arm64/mm/init.c linux-libre-6.16-gnu/arch/arm64/mm/init.c
index b99bf3980fc6..0c8c35dd645e 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/init.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/init.c
@@ -275,26 +275,6 @@ void __init arm64_memblock_init(void)
 		}
 	}
 
-	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
-		extern u16 memstart_offset_seed;
-		u64 mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
-		int parange = cpuid_feature_extract_unsigned_field(
-					mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT);
-		s64 range = linear_region_size -
-			    BIT(id_aa64mmfr0_parange_to_phys_shift(parange));
-
-		/*
-		 * If the size of the linear region exceeds, by a sufficient
-		 * margin, the size of the region that the physical memory can
-		 * span, randomize the linear region as well.
-		 */
-		if (memstart_offset_seed > 0 && range >= (s64)ARM64_MEMSTART_ALIGN) {
-			range /= ARM64_MEMSTART_ALIGN;
-			memstart_addr -= ARM64_MEMSTART_ALIGN *
-					 ((range * memstart_offset_seed) >> 16);
-		}
-	}
-
 	/*
 	 * Register the kernel text, kernel data, initrd, and initial
 	 * pagetables with memblock.
diff --git linux-libre-6.15-gnu/arch/arm64/mm/mmap.c linux-libre-6.16-gnu/arch/arm64/mm/mmap.c
index 07aeab8a7606..c86c348857c4 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/mmap.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/mmap.c
@@ -83,7 +83,7 @@ arch_initcall(adjust_protection_map);
 
 pgprot_t vm_get_page_prot(unsigned long vm_flags)
 {
-	pteval_t prot;
+	ptdesc_t prot;
 
 	/* Short circuit GCS to avoid bloating the table. */
 	if (system_supports_gcs() && (vm_flags & VM_SHADOW_STACK)) {
diff --git linux-libre-6.15-gnu/arch/arm64/mm/mmu.c linux-libre-6.16-gnu/arch/arm64/mm/mmu.c
index ea6695d53fb9..00ab1d648db6 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/mmu.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/mmu.c
@@ -46,6 +46,13 @@
 #define NO_CONT_MAPPINGS	BIT(1)
 #define NO_EXEC_MAPPINGS	BIT(2)	/* assumes FEAT_HPDS is not used */
 
+enum pgtable_type {
+	TABLE_PTE,
+	TABLE_PMD,
+	TABLE_PUD,
+	TABLE_P4D,
+};
+
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
@@ -107,7 +114,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 }
 EXPORT_SYMBOL(phys_mem_access_prot);
 
-static phys_addr_t __init early_pgtable_alloc(int shift)
+static phys_addr_t __init early_pgtable_alloc(enum pgtable_type pgtable_type)
 {
 	phys_addr_t phys;
 
@@ -192,7 +199,7 @@ static void init_pte(pte_t *ptep, unsigned long addr, unsigned long end,
 static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
 				unsigned long end, phys_addr_t phys,
 				pgprot_t prot,
-				phys_addr_t (*pgtable_alloc)(int),
+				phys_addr_t (*pgtable_alloc)(enum pgtable_type),
 				int flags)
 {
 	unsigned long next;
@@ -207,7 +214,7 @@ static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
 		if (flags & NO_EXEC_MAPPINGS)
 			pmdval |= PMD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pte_phys = pgtable_alloc(PAGE_SHIFT);
+		pte_phys = pgtable_alloc(TABLE_PTE);
 		ptep = pte_set_fixmap(pte_phys);
 		init_clear_pgtable(ptep);
 		ptep += pte_index(addr);
@@ -243,7 +250,7 @@ static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
 
 static void init_pmd(pmd_t *pmdp, unsigned long addr, unsigned long end,
 		     phys_addr_t phys, pgprot_t prot,
-		     phys_addr_t (*pgtable_alloc)(int), int flags)
+		     phys_addr_t (*pgtable_alloc)(enum pgtable_type), int flags)
 {
 	unsigned long next;
 
@@ -277,7 +284,8 @@ static void init_pmd(pmd_t *pmdp, unsigned long addr, unsigned long end,
 static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 				unsigned long end, phys_addr_t phys,
 				pgprot_t prot,
-				phys_addr_t (*pgtable_alloc)(int), int flags)
+				phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+				int flags)
 {
 	unsigned long next;
 	pud_t pud = READ_ONCE(*pudp);
@@ -294,7 +302,7 @@ static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 		if (flags & NO_EXEC_MAPPINGS)
 			pudval |= PUD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pmd_phys = pgtable_alloc(PMD_SHIFT);
+		pmd_phys = pgtable_alloc(TABLE_PMD);
 		pmdp = pmd_set_fixmap(pmd_phys);
 		init_clear_pgtable(pmdp);
 		pmdp += pmd_index(addr);
@@ -325,7 +333,7 @@ static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 
 static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 			   phys_addr_t phys, pgprot_t prot,
-			   phys_addr_t (*pgtable_alloc)(int),
+			   phys_addr_t (*pgtable_alloc)(enum pgtable_type),
 			   int flags)
 {
 	unsigned long next;
@@ -339,7 +347,7 @@ static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 		if (flags & NO_EXEC_MAPPINGS)
 			p4dval |= P4D_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pud_phys = pgtable_alloc(PUD_SHIFT);
+		pud_phys = pgtable_alloc(TABLE_PUD);
 		pudp = pud_set_fixmap(pud_phys);
 		init_clear_pgtable(pudp);
 		pudp += pud_index(addr);
@@ -383,7 +391,7 @@ static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 
 static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 			   phys_addr_t phys, pgprot_t prot,
-			   phys_addr_t (*pgtable_alloc)(int),
+			   phys_addr_t (*pgtable_alloc)(enum pgtable_type),
 			   int flags)
 {
 	unsigned long next;
@@ -397,7 +405,7 @@ static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 		if (flags & NO_EXEC_MAPPINGS)
 			pgdval |= PGD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		p4d_phys = pgtable_alloc(P4D_SHIFT);
+		p4d_phys = pgtable_alloc(TABLE_P4D);
 		p4dp = p4d_set_fixmap(p4d_phys);
 		init_clear_pgtable(p4dp);
 		p4dp += p4d_index(addr);
@@ -427,7 +435,7 @@ static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
 					unsigned long virt, phys_addr_t size,
 					pgprot_t prot,
-					phys_addr_t (*pgtable_alloc)(int),
+					phys_addr_t (*pgtable_alloc)(enum pgtable_type),
 					int flags)
 {
 	unsigned long addr, end, next;
@@ -455,7 +463,7 @@ static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
 static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
 				 unsigned long virt, phys_addr_t size,
 				 pgprot_t prot,
-				 phys_addr_t (*pgtable_alloc)(int),
+				 phys_addr_t (*pgtable_alloc)(enum pgtable_type),
 				 int flags)
 {
 	mutex_lock(&fixmap_lock);
@@ -468,37 +476,48 @@ static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
 extern __alias(__create_pgd_mapping_locked)
 void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
 			     phys_addr_t size, pgprot_t prot,
-			     phys_addr_t (*pgtable_alloc)(int), int flags);
+			     phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+			     int flags);
 #endif
 
-static phys_addr_t __pgd_pgtable_alloc(int shift)
+static phys_addr_t __pgd_pgtable_alloc(struct mm_struct *mm,
+				       enum pgtable_type pgtable_type)
 {
 	/* Page is zeroed by init_clear_pgtable() so don't duplicate effort. */
-	void *ptr = (void *)__get_free_page(GFP_PGTABLE_KERNEL & ~__GFP_ZERO);
+	struct ptdesc *ptdesc = pagetable_alloc(GFP_PGTABLE_KERNEL & ~__GFP_ZERO, 0);
+	phys_addr_t pa;
+
+	BUG_ON(!ptdesc);
+	pa = page_to_phys(ptdesc_page(ptdesc));
+
+	switch (pgtable_type) {
+	case TABLE_PTE:
+		BUG_ON(!pagetable_pte_ctor(mm, ptdesc));
+		break;
+	case TABLE_PMD:
+		BUG_ON(!pagetable_pmd_ctor(mm, ptdesc));
+		break;
+	case TABLE_PUD:
+		pagetable_pud_ctor(ptdesc);
+		break;
+	case TABLE_P4D:
+		pagetable_p4d_ctor(ptdesc);
+		break;
+	}
 
-	BUG_ON(!ptr);
-	return __pa(ptr);
+	return pa;
 }
 
-static phys_addr_t pgd_pgtable_alloc(int shift)
+static phys_addr_t __maybe_unused
+pgd_pgtable_alloc_init_mm(enum pgtable_type pgtable_type)
 {
-	phys_addr_t pa = __pgd_pgtable_alloc(shift);
-	struct ptdesc *ptdesc = page_ptdesc(phys_to_page(pa));
-
-	/*
-	 * Call proper page table ctor in case later we need to
-	 * call core mm functions like apply_to_page_range() on
-	 * this pre-allocated page table.
-	 *
-	 * We don't select ARCH_ENABLE_SPLIT_PMD_PTLOCK if pmd is
-	 * folded, and if so pagetable_pte_ctor() becomes nop.
-	 */
-	if (shift == PAGE_SHIFT)
-		BUG_ON(!pagetable_pte_ctor(ptdesc));
-	else if (shift == PMD_SHIFT)
-		BUG_ON(!pagetable_pmd_ctor(ptdesc));
+	return __pgd_pgtable_alloc(&init_mm, pgtable_type);
+}
 
-	return pa;
+static phys_addr_t
+pgd_pgtable_alloc_special_mm(enum pgtable_type pgtable_type)
+{
+	return __pgd_pgtable_alloc(NULL, pgtable_type);
 }
 
 /*
@@ -530,7 +549,7 @@ void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
-			     pgd_pgtable_alloc, flags);
+			     pgd_pgtable_alloc_special_mm, flags);
 }
 
 static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
@@ -744,7 +763,7 @@ static int __init map_entry_trampoline(void)
 	memset(tramp_pg_dir, 0, PGD_SIZE);
 	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
 			     entry_tramp_text_size(), prot,
-			     __pgd_pgtable_alloc, NO_BLOCK_MAPPINGS);
+			     pgd_pgtable_alloc_init_mm, NO_BLOCK_MAPPINGS);
 
 	/* Map both the text and data into the kernel page table */
 	for (i = 0; i < DIV_ROUND_UP(entry_tramp_text_size(), PAGE_SIZE); i++)
@@ -1286,7 +1305,8 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 	next = addr;
 	end = addr + PUD_SIZE;
 	do {
-		pmd_free_pte_page(pmdp, next);
+		if (pmd_present(pmdp_get(pmdp)))
+			pmd_free_pte_page(pmdp, next);
 	} while (pmdp++, next += PMD_SIZE, next != end);
 
 	pud_clear(pudp);
@@ -1350,7 +1370,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
-			     size, params->pgprot, __pgd_pgtable_alloc,
+			     size, params->pgprot, pgd_pgtable_alloc_init_mm,
 			     flags);
 
 	memblock_clear_nomap(start, size);
diff --git linux-libre-6.15-gnu/arch/arm64/mm/pageattr.c linux-libre-6.16-gnu/arch/arm64/mm/pageattr.c
index 39fd1f7ff02a..04d4a8f676db 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/pageattr.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/pageattr.c
@@ -96,8 +96,8 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 * we are operating on does not result in such splitting.
 	 *
 	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
-	 * Those are guaranteed to consist entirely of page mappings, and
-	 * splitting is never needed.
+	 * Disallow VM_ALLOW_HUGE_VMAP mappings to guarantee that only page
+	 * mappings are updated and splitting is never needed.
 	 *
 	 * So check whether the [addr, addr + size) interval is entirely
 	 * covered by precisely one VM area that has the VM_ALLOC flag set.
@@ -105,7 +105,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	area = find_vm_area((void *)addr);
 	if (!area ||
 	    end > (unsigned long)kasan_reset_tag(area->addr) + area->size ||
-	    !(area->flags & VM_ALLOC))
+	    ((area->flags & (VM_ALLOC | VM_ALLOW_HUGE_VMAP)) != VM_ALLOC))
 		return -EINVAL;
 
 	if (!numpages)
diff --git linux-libre-6.15-gnu/arch/arm64/mm/proc.S linux-libre-6.16-gnu/arch/arm64/mm/proc.S
index fb30c8804f87..54dccfd6aa11 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/proc.S
+++ linux-libre-6.16-gnu/arch/arm64/mm/proc.S
@@ -512,28 +512,12 @@ alternative_else_nop_endif
 	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
 	cbz	x1, .Lskip_indirection
 
-	/*
-	 * The PROT_* macros describing the various memory types may resolve to
-	 * C expressions if they include the PTE_MAYBE_* macros, and so they
-	 * can only be used from C code. The PIE_E* constants below are also
-	 * defined in terms of those macros, but will mask out those
-	 * PTE_MAYBE_* constants, whether they are set or not. So #define them
-	 * as 0x0 here so we can evaluate the PIE_E* constants in asm context.
-	 */
-
-#define PTE_MAYBE_NG		0
-#define PTE_MAYBE_SHARED	0
-
-	mov_q	x0, PIE_E0
+	mov_q	x0, PIE_E0_ASM
 	msr	REG_PIRE0_EL1, x0
-	mov_q	x0, PIE_E1
+	mov_q	x0, PIE_E1_ASM
 	msr	REG_PIR_EL1, x0
 
-#undef PTE_MAYBE_NG
-#undef PTE_MAYBE_SHARED
-
 	orr	tcr2, tcr2, TCR2_EL1_PIE
-	msr	REG_TCR2_EL1, x0
 
 .Lskip_indirection:
 
diff --git linux-libre-6.15-gnu/arch/arm64/mm/ptdump.c linux-libre-6.16-gnu/arch/arm64/mm/ptdump.c
index 8cec0da4cff2..421a5de806c6 100644
--- linux-libre-6.15-gnu/arch/arm64/mm/ptdump.c
+++ linux-libre-6.16-gnu/arch/arm64/mm/ptdump.c
@@ -189,12 +189,12 @@ static void note_prot_wx(struct ptdump_pg_state *st, unsigned long addr)
 }
 
 void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
-	       u64 val)
+	       pteval_t val)
 {
 	struct ptdump_pg_state *st = container_of(pt_st, struct ptdump_pg_state, ptdump);
 	struct ptdump_pg_level *pg_level = st->pg_level;
 	static const char units[] = "KMGTPE";
-	u64 prot = 0;
+	ptdesc_t prot = 0;
 
 	/* check if the current level has been folded dynamically */
 	if (st->mm && ((level == 1 && mm_p4d_folded(st->mm)) ||
@@ -251,6 +251,38 @@ void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
 
 }
 
+void note_page_pte(struct ptdump_state *pt_st, unsigned long addr, pte_t pte)
+{
+	note_page(pt_st, addr, 4, pte_val(pte));
+}
+
+void note_page_pmd(struct ptdump_state *pt_st, unsigned long addr, pmd_t pmd)
+{
+	note_page(pt_st, addr, 3, pmd_val(pmd));
+}
+
+void note_page_pud(struct ptdump_state *pt_st, unsigned long addr, pud_t pud)
+{
+	note_page(pt_st, addr, 2, pud_val(pud));
+}
+
+void note_page_p4d(struct ptdump_state *pt_st, unsigned long addr, p4d_t p4d)
+{
+	note_page(pt_st, addr, 1, p4d_val(p4d));
+}
+
+void note_page_pgd(struct ptdump_state *pt_st, unsigned long addr, pgd_t pgd)
+{
+	note_page(pt_st, addr, 0, pgd_val(pgd));
+}
+
+void note_page_flush(struct ptdump_state *pt_st)
+{
+	pte_t pte_zero = {0};
+
+	note_page(pt_st, 0, -1, pte_val(pte_zero));
+}
+
 void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 {
 	unsigned long end = ~0UL;
@@ -266,7 +298,12 @@ void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 		.pg_level = &kernel_pg_levels[0],
 		.level = -1,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]){
 				{info->base_addr, end},
 				{0, 0}
@@ -303,7 +340,12 @@ bool ptdump_check_wx(void)
 		.level = -1,
 		.check_wx = true,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]) {
 				{_PAGE_OFFSET(vabits_actual), ~0UL},
 				{0, 0}
diff --git linux-libre-6.15-gnu/arch/arm64/net/bpf_jit_comp.c linux-libre-6.16-gnu/arch/arm64/net/bpf_jit_comp.c
index 634d78422adb..da8b89dd2910 100644
--- linux-libre-6.15-gnu/arch/arm64/net/bpf_jit_comp.c
+++ linux-libre-6.16-gnu/arch/arm64/net/bpf_jit_comp.c
@@ -2113,7 +2113,7 @@ bool bpf_jit_supports_subprog_tailcalls(void)
 }
 
 static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
-			    int args_off, int retval_off, int run_ctx_off,
+			    int bargs_off, int retval_off, int run_ctx_off,
 			    bool save_ret)
 {
 	__le32 *branch;
@@ -2155,7 +2155,7 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 	branch = ctx->image + ctx->idx;
 	emit(A64_NOP, ctx);
 
-	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
+	emit(A64_ADD_I(1, A64_R(0), A64_SP, bargs_off), ctx);
 	if (!p->jited)
 		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);
 
@@ -2180,7 +2180,7 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 }
 
 static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
-			       int args_off, int retval_off, int run_ctx_off,
+			       int bargs_off, int retval_off, int run_ctx_off,
 			       __le32 **branches)
 {
 	int i;
@@ -2190,7 +2190,7 @@ static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
 	 */
 	emit(A64_STR64I(A64_ZR, A64_SP, retval_off), ctx);
 	for (i = 0; i < tl->nr_links; i++) {
-		invoke_bpf_prog(ctx, tl->links[i], args_off, retval_off,
+		invoke_bpf_prog(ctx, tl->links[i], bargs_off, retval_off,
 				run_ctx_off, true);
 		/* if (*(u64 *)(sp + retval_off) !=  0)
 		 *	goto do_fexit;
@@ -2204,23 +2204,125 @@ static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
 	}
 }
 
-static void save_args(struct jit_ctx *ctx, int args_off, int nregs)
+struct arg_aux {
+	/* how many args are passed through registers, the rest of the args are
+	 * passed through stack
+	 */
+	int args_in_regs;
+	/* how many registers are used to pass arguments */
+	int regs_for_args;
+	/* how much stack is used for additional args passed to bpf program
+	 * that did not fit in original function registers
+	 */
+	int bstack_for_args;
+	/* home much stack is used for additional args passed to the
+	 * original function when called from trampoline (this one needs
+	 * arguments to be properly aligned)
+	 */
+	int ostack_for_args;
+};
+
+static int calc_arg_aux(const struct btf_func_model *m,
+			 struct arg_aux *a)
 {
-	int i;
+	int stack_slots, nregs, slots, i;
+
+	/* verifier ensures m->nr_args <= MAX_BPF_FUNC_ARGS */
+	for (i = 0, nregs = 0; i < m->nr_args; i++) {
+		slots = (m->arg_size[i] + 7) / 8;
+		if (nregs + slots <= 8) /* passed through register ? */
+			nregs += slots;
+		else
+			break;
+	}
+
+	a->args_in_regs = i;
+	a->regs_for_args = nregs;
+	a->ostack_for_args = 0;
+	a->bstack_for_args = 0;
+
+	/* the rest arguments are passed through stack */
+	for (; i < m->nr_args; i++) {
+		/* We can not know for sure about exact alignment needs for
+		 * struct passed on stack, so deny those
+		 */
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
+			return -ENOTSUPP;
+		stack_slots = (m->arg_size[i] + 7) / 8;
+		a->bstack_for_args += stack_slots * 8;
+		a->ostack_for_args = a->ostack_for_args + stack_slots * 8;
+	}
+
+	return 0;
+}
 
-	for (i = 0; i < nregs; i++) {
-		emit(A64_STR64I(i, A64_SP, args_off), ctx);
-		args_off += 8;
+static void clear_garbage(struct jit_ctx *ctx, int reg, int effective_bytes)
+{
+	if (effective_bytes) {
+		int garbage_bits = 64 - 8 * effective_bytes;
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		/* garbage bits are at the right end */
+		emit(A64_LSR(1, reg, reg, garbage_bits), ctx);
+		emit(A64_LSL(1, reg, reg, garbage_bits), ctx);
+#else
+		/* garbage bits are at the left end */
+		emit(A64_LSL(1, reg, reg, garbage_bits), ctx);
+		emit(A64_LSR(1, reg, reg, garbage_bits), ctx);
+#endif
 	}
 }
 
-static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
+static void save_args(struct jit_ctx *ctx, int bargs_off, int oargs_off,
+		      const struct btf_func_model *m,
+		      const struct arg_aux *a,
+		      bool for_call_origin)
 {
 	int i;
+	int reg;
+	int doff;
+	int soff;
+	int slots;
+	u8 tmp = bpf2a64[TMP_REG_1];
+
+	/* store arguments to the stack for the bpf program, or restore
+	 * arguments from stack for the original function
+	 */
+	for (reg = 0; reg < a->regs_for_args; reg++) {
+		emit(for_call_origin ?
+		     A64_LDR64I(reg, A64_SP, bargs_off) :
+		     A64_STR64I(reg, A64_SP, bargs_off),
+		     ctx);
+		bargs_off += 8;
+	}
+
+	soff = 32; /* on stack arguments start from FP + 32 */
+	doff = (for_call_origin ? oargs_off : bargs_off);
+
+	/* save on stack arguments */
+	for (i = a->args_in_regs; i < m->nr_args; i++) {
+		slots = (m->arg_size[i] + 7) / 8;
+		/* verifier ensures arg_size <= 16, so slots equals 1 or 2 */
+		while (slots-- > 0) {
+			emit(A64_LDR64I(tmp, A64_FP, soff), ctx);
+			/* if there is unused space in the last slot, clear
+			 * the garbage contained in the space.
+			 */
+			if (slots == 0 && !for_call_origin)
+				clear_garbage(ctx, tmp, m->arg_size[i] % 8);
+			emit(A64_STR64I(tmp, A64_SP, doff), ctx);
+			soff += 8;
+			doff += 8;
+		}
+	}
+}
 
-	for (i = 0; i < nregs; i++) {
-		emit(A64_LDR64I(i, A64_SP, args_off), ctx);
-		args_off += 8;
+static void restore_args(struct jit_ctx *ctx, int bargs_off, int nregs)
+{
+	int reg;
+
+	for (reg = 0; reg < nregs; reg++) {
+		emit(A64_LDR64I(reg, A64_SP, bargs_off), ctx);
+		bargs_off += 8;
 	}
 }
 
@@ -2243,17 +2345,21 @@ static bool is_struct_ops_tramp(const struct bpf_tramp_links *fentry_links)
  */
 static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 			      struct bpf_tramp_links *tlinks, void *func_addr,
-			      int nregs, u32 flags)
+			      const struct btf_func_model *m,
+			      const struct arg_aux *a,
+			      u32 flags)
 {
 	int i;
 	int stack_size;
 	int retaddr_off;
 	int regs_off;
 	int retval_off;
-	int args_off;
-	int nregs_off;
+	int bargs_off;
+	int nfuncargs_off;
 	int ip_off;
 	int run_ctx_off;
+	int oargs_off;
+	int nfuncargs;
 	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
 	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
 	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
@@ -2262,31 +2368,38 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	bool is_struct_ops = is_struct_ops_tramp(fentry);
 
 	/* trampoline stack layout:
-	 *                  [ parent ip         ]
-	 *                  [ FP                ]
-	 * SP + retaddr_off [ self ip           ]
-	 *                  [ FP                ]
+	 *                    [ parent ip         ]
+	 *                    [ FP                ]
+	 * SP + retaddr_off   [ self ip           ]
+	 *                    [ FP                ]
 	 *
-	 *                  [ padding           ] align SP to multiples of 16
+	 *                    [ padding           ] align SP to multiples of 16
 	 *
-	 *                  [ x20               ] callee saved reg x20
-	 * SP + regs_off    [ x19               ] callee saved reg x19
+	 *                    [ x20               ] callee saved reg x20
+	 * SP + regs_off      [ x19               ] callee saved reg x19
 	 *
-	 * SP + retval_off  [ return value      ] BPF_TRAMP_F_CALL_ORIG or
-	 *                                        BPF_TRAMP_F_RET_FENTRY_RET
+	 * SP + retval_off    [ return value      ] BPF_TRAMP_F_CALL_ORIG or
+	 *                                          BPF_TRAMP_F_RET_FENTRY_RET
+	 *                    [ arg reg N         ]
+	 *                    [ ...               ]
+	 * SP + bargs_off     [ arg reg 1         ] for bpf
 	 *
-	 *                  [ arg reg N         ]
-	 *                  [ ...               ]
-	 * SP + args_off    [ arg reg 1         ]
+	 * SP + nfuncargs_off [ arg regs count    ]
 	 *
-	 * SP + nregs_off   [ arg regs count    ]
+	 * SP + ip_off        [ traced function   ] BPF_TRAMP_F_IP_ARG flag
 	 *
-	 * SP + ip_off      [ traced function   ] BPF_TRAMP_F_IP_ARG flag
+	 * SP + run_ctx_off   [ bpf_tramp_run_ctx ]
 	 *
-	 * SP + run_ctx_off [ bpf_tramp_run_ctx ]
+	 *                    [ stack arg N       ]
+	 *                    [ ...               ]
+	 * SP + oargs_off     [ stack arg 1       ] for original func
 	 */
 
 	stack_size = 0;
+	oargs_off = stack_size;
+	if (flags & BPF_TRAMP_F_CALL_ORIG)
+		stack_size +=  a->ostack_for_args;
+
 	run_ctx_off = stack_size;
 	/* room for bpf_tramp_run_ctx */
 	stack_size += round_up(sizeof(struct bpf_tramp_run_ctx), 8);
@@ -2296,13 +2409,14 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	if (flags & BPF_TRAMP_F_IP_ARG)
 		stack_size += 8;
 
-	nregs_off = stack_size;
+	nfuncargs_off = stack_size;
 	/* room for args count */
 	stack_size += 8;
 
-	args_off = stack_size;
+	bargs_off = stack_size;
 	/* room for args */
-	stack_size += nregs * 8;
+	nfuncargs = a->regs_for_args + a->bstack_for_args / 8;
+	stack_size += 8 * nfuncargs;
 
 	/* room for return value */
 	retval_off = stack_size;
@@ -2349,11 +2463,11 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	/* save arg regs count*/
-	emit(A64_MOVZ(1, A64_R(10), nregs, 0), ctx);
-	emit(A64_STR64I(A64_R(10), A64_SP, nregs_off), ctx);
+	emit(A64_MOVZ(1, A64_R(10), nfuncargs, 0), ctx);
+	emit(A64_STR64I(A64_R(10), A64_SP, nfuncargs_off), ctx);
 
-	/* save arg regs */
-	save_args(ctx, args_off, nregs);
+	/* save args for bpf */
+	save_args(ctx, bargs_off, oargs_off, m, a, false);
 
 	/* save callee saved registers */
 	emit(A64_STR64I(A64_R(19), A64_SP, regs_off), ctx);
@@ -2369,7 +2483,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	for (i = 0; i < fentry->nr_links; i++)
-		invoke_bpf_prog(ctx, fentry->links[i], args_off,
+		invoke_bpf_prog(ctx, fentry->links[i], bargs_off,
 				retval_off, run_ctx_off,
 				flags & BPF_TRAMP_F_RET_FENTRY_RET);
 
@@ -2379,12 +2493,13 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 		if (!branches)
 			return -ENOMEM;
 
-		invoke_bpf_mod_ret(ctx, fmod_ret, args_off, retval_off,
+		invoke_bpf_mod_ret(ctx, fmod_ret, bargs_off, retval_off,
 				   run_ctx_off, branches);
 	}
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
-		restore_args(ctx, args_off, nregs);
+		/* save args for original func */
+		save_args(ctx, bargs_off, oargs_off, m, a, true);
 		/* call original func */
 		emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx);
 		emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx);
@@ -2403,7 +2518,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	for (i = 0; i < fexit->nr_links; i++)
-		invoke_bpf_prog(ctx, fexit->links[i], args_off, retval_off,
+		invoke_bpf_prog(ctx, fexit->links[i], bargs_off, retval_off,
 				run_ctx_off, false);
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
@@ -2417,7 +2532,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	if (flags & BPF_TRAMP_F_RESTORE_REGS)
-		restore_args(ctx, args_off, nregs);
+		restore_args(ctx, bargs_off, a->regs_for_args);
 
 	/* restore callee saved register x19 and x20 */
 	emit(A64_LDR64I(A64_R(19), A64_SP, regs_off), ctx);
@@ -2454,21 +2569,6 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	return ctx->idx;
 }
 
-static int btf_func_model_nregs(const struct btf_func_model *m)
-{
-	int nregs = m->nr_args;
-	int i;
-
-	/* extra registers needed for struct argument */
-	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
-		/* The arg_size is at most 16 bytes, enforced by the verifier. */
-		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
-			nregs += (m->arg_size[i] + 7) / 8 - 1;
-	}
-
-	return nregs;
-}
-
 int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
 			     struct bpf_tramp_links *tlinks, void *func_addr)
 {
@@ -2477,14 +2577,14 @@ int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
 		.idx = 0,
 	};
 	struct bpf_tramp_image im;
-	int nregs, ret;
+	struct arg_aux aaux;
+	int ret;
 
-	nregs = btf_func_model_nregs(m);
-	/* the first 8 registers are used for arguments */
-	if (nregs > 8)
-		return -ENOTSUPP;
+	ret = calc_arg_aux(m, &aaux);
+	if (ret < 0)
+		return ret;
 
-	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags);
+	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, m, &aaux, flags);
 	if (ret < 0)
 		return ret;
 
@@ -2511,9 +2611,10 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 				u32 flags, struct bpf_tramp_links *tlinks,
 				void *func_addr)
 {
-	int ret, nregs;
-	void *image, *tmp;
 	u32 size = ro_image_end - ro_image;
+	struct arg_aux aaux;
+	void *image, *tmp;
+	int ret;
 
 	/* image doesn't need to be in module memory range, so we can
 	 * use kvmalloc.
@@ -2529,13 +2630,12 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 		.write = true,
 	};
 
-	nregs = btf_func_model_nregs(m);
-	/* the first 8 registers are used for arguments */
-	if (nregs > 8)
-		return -ENOTSUPP;
 
 	jit_fill_hole(image, (unsigned int)(ro_image_end - ro_image));
-	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags);
+	ret = calc_arg_aux(m, &aaux);
+	if (ret)
+		goto out;
+	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, m, &aaux, flags);
 
 	if (ret > 0 && validate_code(&ctx) < 0) {
 		ret = -EINVAL;
diff --git linux-libre-6.15-gnu/arch/arm64/tools/cpucaps linux-libre-6.16-gnu/arch/arm64/tools/cpucaps
index 772c1b008e43..10effd4cff6b 100644
--- linux-libre-6.15-gnu/arch/arm64/tools/cpucaps
+++ linux-libre-6.16-gnu/arch/arm64/tools/cpucaps
@@ -28,6 +28,7 @@ HAS_EPAN
 HAS_EVT
 HAS_FPMR
 HAS_FGT
+HAS_FGT2
 HAS_FPSIMD
 HAS_GCS
 HAS_GENERIC_AUTH
@@ -94,6 +95,7 @@ WORKAROUND_2457168
 WORKAROUND_2645198
 WORKAROUND_2658417
 WORKAROUND_AMPERE_AC03_CPU_38
+WORKAROUND_AMPERE_AC04_CPU_23
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
diff --git linux-libre-6.15-gnu/arch/arm64/tools/sysreg linux-libre-6.16-gnu/arch/arm64/tools/sysreg
index bdf044c5d11b..8a8cf6874298 100644
--- linux-libre-6.15-gnu/arch/arm64/tools/sysreg
+++ linux-libre-6.16-gnu/arch/arm64/tools/sysreg
@@ -101,6 +101,17 @@ Res0	63:32
 Field	31:0	DTRTX
 EndSysreg
 
+Sysreg	MDSELR_EL1	2	0	0	4	2
+Res0	63:6
+Field	5:4	BANK
+Res0	3:0
+EndSysreg
+
+Sysreg	MDSTEPOP_EL1	2	0	0	5	2
+Res0	63:32
+Field	31:0	OPCODE
+EndSysreg
+
 Sysreg	OSECCR_EL1	2	0	0	6	2
 Res0	63:32
 Field	31:0	EDECCR
@@ -111,6 +122,285 @@ Res0	63:1
 Field	0	OSLK
 EndSysreg
 
+Sysreg	SPMACCESSR_EL1	2	0	9	13	3
+UnsignedEnum	63:62	P31
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	61:60	P30
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	59:58	P29
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	57:56	P28
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	55:54	P27
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	53:52	P26
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	51:50	P25
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	49:48	P24
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	47:46	P23
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	45:44	P22
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	43:42	P21
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	41:40	P20
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	39:38	P19
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	37:36	P18
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	35:34	P17
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	33:32	P16
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	31:30	P15
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	29:28	P14
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	27:26	P13
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	25:24	P12
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	23:22	P11
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	21:20	P10
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	19:18	P9
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	17:16	P8
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	15:14	P7
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	13:12	P6
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	11:10	P5
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	9:8	P4
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	7:6	P3
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	5:4	P2
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	3:2	P1
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	1:0	P0
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+EndSysreg
+
+Sysreg	SPMACCESSR_EL12	2	5	9	13	3
+Mapping	SPMACCESSR_EL1
+EndSysreg
+
+Sysreg	SPMIIDR_EL1	2	0	9	13	4
+Res0	63:32
+Field	31:20	ProductID
+Field	19:16	Variant
+Field	15:12	Revision
+Field	11:0	Implementer
+EndSysreg
+
+Sysreg	SPMDEVARCH_EL1	2	0	9	13	5
+Res0	63:32
+Field	31:21	ARCHITECT
+Field	20	PRESENT
+Field	19:16	REVISION
+Field	15:12	ARCHVER
+Field	11:0	ARCHPART
+EndSysreg
+
+Sysreg	SPMDEVAFF_EL1	2	0	9	13	6
+Res0	63:40
+Field	39:32	Aff3
+Field	31	F0V
+Field	30	U
+Res0	29:25
+Field	24	MT
+Field	23:16	Aff2
+Field	15:8	Aff1
+Field	7:0	Aff0
+EndSysreg
+
+Sysreg	SPMCFGR_EL1	2	0	9	13	7
+Res0	63:32
+Field	31:28	NCG
+Res0	27:25
+Field	24	HDBG
+Field	23	TRO
+Field	22	SS
+Field	21	FZO
+Field	20	MSI
+Field	19	RAO
+Res0	18
+Field	17	NA
+Field	16	EX
+Field	15:14	RAZ
+Field	13:8	SIZE
+Field	7:0	N
+EndSysreg
+
+Sysreg	SPMINTENSET_EL1	2	0	9	14	1
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMINTENCLR_EL1	2	0	9	14	2
+Field	63:0	P
+EndSysreg
+
+Sysreg	PMCCNTSVR_EL1	2	0	14	11	7
+Field	63:0	CCNT
+EndSysreg
+
+Sysreg	PMICNTSVR_EL1	2	0	14	12	0
+Field	63:0	ICNT
+EndSysreg
+
+Sysreg	SPMCR_EL0	2	3	9	12	0
+Res0	63:12
+Field	11	TRO
+Field	10	HDBG
+Field	9	FZO
+Field	8	NA
+Res0	7:5
+Field	4	EX
+Res0	3:2
+Field	1	P
+Field	0	E
+EndSysreg
+
+Sysreg	SPMCNTENSET_EL0	2	3	9	12	1
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMCNTENCLR_EL0	2	3	9	12	2
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMOVSCLR_EL0	2	3	9	12	3
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMZR_EL0       2	3	9	12	4
+Field   63:0      P
+EndSysreg
+
+Sysreg	SPMSELR_EL0	2	3	9	12	5
+Res0	63:10
+Field	9:4	SYSPMUSEL
+Res0	3:2
+Field	1:0	BANK
+EndSysreg
+
+Sysreg	SPMOVSSET_EL0	2	3	9	14	3
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMSCR_EL1	2	7	9	14	7
+Field	63:32	IMPDEF
+Field	31	RAO
+Res0	30:5
+Field	4	NAO
+Res0	3:1
+Field	0	SO
+EndSysreg
+
 Sysreg ID_PFR0_EL1	3	0	0	1	0
 Res0	63:32
 UnsignedEnum	31:28	RAS
@@ -907,6 +1197,7 @@ UnsignedEnum	31:28	RAS
 	0b0000	NI
 	0b0001	IMP
 	0b0010	V1P1
+	0b0011	V2
 EndEnum
 UnsignedEnum	27:24	GIC
 	0b0000	NI
@@ -1466,6 +1757,7 @@ UnsignedEnum	63:60	LS64
 	0b0001	LS64
 	0b0010	LS64_V
 	0b0011	LS64_ACCDATA
+	0b0100	LS64WB
 EndEnum
 UnsignedEnum	59:56	XS
 	0b0000	NI
@@ -1945,12 +2237,21 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64MMFR4_EL1	3	0	0	7	4
-Res0	63:40
+Res0	63:48
+UnsignedEnum	47:44	SRMASK
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	43:40
 UnsignedEnum	39:36	E3DSE
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	35:28
+Res0	35:32
+UnsignedEnum	31:28	RMEGDI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 SignedEnum	27:24	E2H0
 	0b0000	IMP
 	0b1110	NI_NV1
@@ -1959,6 +2260,7 @@ EndEnum
 UnsignedEnum	23:20	NV_frac
 	0b0000	NV_NV2
 	0b0001	NV2_ONLY
+	0b0010	NV2P1
 EndEnum
 UnsignedEnum	19:16	FGWTE3
 	0b0000	NI
@@ -1978,7 +2280,10 @@ SignedEnum	7:4	EIESB
 	0b0010	ToELx
 	0b1111	ANY
 EndEnum
-Res0	3:0
+UnsignedEnum	3:0	PoPS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 EndSysreg
 
 Sysreg	SCTLR_EL1	3	0	1	0	0
@@ -2053,8 +2358,30 @@ Field	1	A
 Field	0	M
 EndSysreg
 
+Sysreg	SCTLR_EL12      3	5	1	0	0
+Mapping	SCTLR_EL1
+EndSysreg
+
+Sysreg	SCTLRALIAS_EL1  3	0	1	4	6
+Mapping	SCTLR_EL1
+EndSysreg
+
+Sysreg	ACTLR_EL1	3	0	1	0	1
+Field   63:0    IMPDEF
+EndSysreg
+
+Sysreg	ACTLR_EL12      3	5	1	0	1
+Mapping	ACTLR_EL1
+EndSysreg
+
+Sysreg	ACTLRALIAS_EL1  3	0	1	4	5
+Mapping	ACTLR_EL1
+EndSysreg
+
 Sysreg	CPACR_EL1	3	0	1	0	2
-Res0	63:30
+Res0	63:32
+Field	31	TCPAC
+Field	30	TAM
 Field	29	E0POE
 Field	28	TTA
 Res0	27:26
@@ -2066,6 +2393,323 @@ Field	17:16	ZEN
 Res0	15:0
 EndSysreg
 
+Sysreg	CPACR_EL12      3	5	1	0	2
+Mapping	CPACR_EL1
+EndSysreg
+
+Sysreg	CPACRALIAS_EL1  3	0	1	4	4
+Mapping	CPACR_EL1
+EndSysreg
+
+Sysreg	ACTLRMASK_EL1	3	0	1	4	1
+Field	63:0	IMPDEF
+EndSysreg
+
+Sysreg	ACTLRMASK_EL12	3	5	1	4	1
+Mapping	ACTLRMASK_EL1
+EndSysreg
+
+Sysreg	CPACRMASK_EL1	3	0	1	4	2
+Res0	63:32
+Field	31	TCPAC
+Field	30	TAM
+Field	29	E0POE
+Field	28	TTA
+Res0	27:25
+Field	24	SMEN
+Res0	23:21
+Field	20	FPEN
+Res0	19:17
+Field	16	ZEN
+Res0	15:0
+EndSysreg
+
+Sysreg	CPACRMASK_EL12	3	5	1	4	2
+Mapping CPACRMASK_EL1
+EndSysreg
+
+Sysreg	PFAR_EL1	3	0	6	0	5
+Field	63	NS
+Field	62	NSE
+Res0	61:56
+Field	55:52	PA_55_52
+Field	51:48	PA_51_48
+Field	47:0	PA
+EndSysreg
+
+Sysreg	PFAR_EL12	3	5	6	0	5
+Mapping	PFAR_EL1
+EndSysreg
+
+Sysreg	RCWSMASK_EL1	3	0	13	0	3
+Field	63:0	RCWSMASK
+EndSysreg
+
+Sysreg	SCTLR2_EL1      3	0	1	0	3
+Res0    63:13
+Field   12      CPTM0
+Field   11      CPTM
+Field   10      CPTA0
+Field   9       CPTA
+Field   8       EnPACM0
+Field   7       EnPACM
+Field   6       EnIDCP128
+Field   5       EASE
+Field   4       EnANERR
+Field   3       EnADERR
+Field   2       NMEA
+Res0    1:0
+EndSysreg
+
+Sysreg	SCTLR2_EL12     3	5	1	0	3
+Mapping	SCTLR2_EL1
+EndSysreg
+
+Sysreg	SCTLR2ALIAS_EL1 3	0	1	4	7
+Mapping	SCTLR2_EL1
+EndSysreg
+
+Sysreg	SCTLR2MASK_EL1	3	0	1	4	3
+Res0	63:13
+Field	12	CPTM0
+Field	11	CPTM
+Field	10	CPTA0
+Field	9	CPTA
+Field	8	EnPACM0
+Field	7	EnPACM
+Field	6	EnIDCP128
+Field	5	EASE
+Field	4	EnANERR
+Field	3	EnADERR
+Field	2	NMEA
+Res0	1:0
+EndSysreg
+
+Sysreg	SCTLR2MASK_EL12	3	5	1	4	3
+Mapping	SCTLR2MASK_EL1
+EndSysreg
+
+Sysreg	SCTLRMASK_EL1	3	0	1	4	0
+Field	63	TIDCP
+Field	62	SPINTMASK
+Field	61	NMI
+Field	60	EnTP2
+Field	59	TCSO
+Field	58	TCSO0
+Field	57	EPAN
+Field	56	EnALS
+Field	55	EnAS0
+Field	54	EnASR
+Field	53	TME
+Field	52	TME0
+Field	51	TMT
+Field	50	TMT0
+Res0	49:47
+Field	46	TWEDEL
+Field	45	TWEDEn
+Field	44	DSSBS
+Field	43	ATA
+Field	42	ATA0
+Res0	41
+Field	40	TCF
+Res0	39
+Field	38	TCF0
+Field	37	ITFSB
+Field	36	BT1
+Field	35	BT0
+Field	34	EnFPM
+Field	33	MSCEn
+Field	32	CMOW
+Field	31	EnIA
+Field	30	EnIB
+Field	29	LSMAOE
+Field	28	nTLSMD
+Field	27	EnDA
+Field	26	UCI
+Field	25	EE
+Field	24	E0E
+Field	23	SPAN
+Field	22	EIS
+Field	21	IESB
+Field	20	TSCXT
+Field	19	WXN
+Field	18	nTWE
+Res0	17
+Field	16	nTWI
+Field	15	UCT
+Field	14	DZE
+Field	13	EnDB
+Field	12	I
+Field	11	EOS
+Field	10	EnRCTX
+Field	9	UMA
+Field	8	SED
+Field	7	ITD
+Field	6	nAA
+Field	5	CP15BEN
+Field	4	SA0
+Field	3	SA
+Field	2	C
+Field	1	A
+Field	0	M
+EndSysreg
+
+Sysreg	SCTLRMASK_EL12	3	5	1	4	0
+Mapping	SCTLRMASK_EL1
+EndSysreg
+
+Sysreg	TCR2MASK_EL1	3	0	2	7	3
+Res0	63:22
+Field	21	FNGNA1
+Field	20	FNGNA0
+Res0	19
+Field	18	FNG1
+Field	17	FNG0
+Field	16	A2
+Field	15	DisCH1
+Field	14	DisCH0
+Res0	13:12
+Field	11	HAFT
+Field	10	PTTWI
+Res0	9:6
+Field	5	D128
+Field	4	AIE
+Field	3	POE
+Field	2	E0POE
+Field	1	PIE
+Field	0	PnCH
+EndSysreg
+
+Sysreg	TCR2MASK_EL12	3	5	2	7	3
+Mapping	TCR2MASK_EL1
+EndSysreg
+
+Sysreg	TCRMASK_EL1	3	0	2	7	2
+Res0	63:62
+Field	61	MTX1
+Field	60	MTX0
+Field	59	DS
+Field	58	TCMA1
+Field	57	TCMA0
+Field	56	E0PD1
+Field	55	E0PD0
+Field	54	NFD1
+Field	53	NFD0
+Field	52	TBID1
+Field	51	TBID0
+Field	50	HWU162
+Field	49	HWU161
+Field	48	HWU160
+Field	47	HWU159
+Field	46	HWU062
+Field	45	HWU061
+Field	44	HWU060
+Field	43	HWU059
+Field	42	HPD1
+Field	41	HPD0
+Field	40	HD
+Field	39	HA
+Field	38	TBI1
+Field	37	TBI0
+Field	36	AS
+Res0	35:33
+Field	32	IPS
+Res0	31
+Field	30	TG1
+Res0	29
+Field	28	SH1
+Res0	27
+Field	26	ORGN1
+Res0	25
+Field	24	IRGN1
+Field	23	EPD1
+Field	22	A1
+Res0	21:17
+Field	16	T1SZ
+Res0	15
+Field	14	TG0
+Res0	13
+Field	12	SH0
+Res0	11
+Field	10	ORGN0
+Res0	9
+Field	8	IRGN0
+Field	7	EPD0
+Res0	6:1
+Field	0	T0SZ
+EndSysreg
+
+Sysreg	TCRMASK_EL12	3	5	2	7	2
+Mapping TCRMASK_EL1
+EndSysreg
+
+Sysreg	ERXGSR_EL1	3	0	5	3	2
+Field	63	S63
+Field	62	S62
+Field	61	S61
+Field	60	S60
+Field	59	S59
+Field	58	S58
+Field	57	S57
+Field	56	S56
+Field	55	S55
+Field	54	S54
+Field	53	S53
+Field	52	S52
+Field	51	S51
+Field	50	S50
+Field	49	S49
+Field	48	S48
+Field	47	S47
+Field	46	S46
+Field	45	S45
+Field	44	S44
+Field	43	S43
+Field	42	S42
+Field	41	S41
+Field	40	S40
+Field	39	S39
+Field	38	S38
+Field	37	S37
+Field	36	S36
+Field	35	S35
+Field	34	S34
+Field	33	S33
+Field	32	S32
+Field	31	S31
+Field	30	S30
+Field	29	S29
+Field	28	S28
+Field	27	S27
+Field	26	S26
+Field	25	S25
+Field	24	S24
+Field	23	S23
+Field	22	S22
+Field	21	S21
+Field	20	S20
+Field	19	S19
+Field	18	S18
+Field	17	S17
+Field	16	S16
+Field	15	S15
+Field	14	S14
+Field	13	S13
+Field	12	S12
+Field	11	S11
+Field	10	S10
+Field	9	S9
+Field	8	S8
+Field	7	S7
+Field	6	S6
+Field	5	S5
+Field	4	S4
+Field	3	S3
+Field	2	S2
+Field	1	S1
+Field	0	S0
+EndSysreg
+
 Sysreg	TRFCR_EL1	3	0	1	2	1
 Res0	63:7
 UnsignedEnum	6:5	TS
@@ -2078,6 +2722,16 @@ Field	1	ExTRE
 Field	0	E0TRE
 EndSysreg
 
+Sysreg	TRCITECR_EL1	3	0	1	2	3
+Res0	63:2
+Field	1	E1E
+Field	0	E0E
+EndSysreg
+
+Sysreg	TRCITECR_EL12	3	5	1	2	3
+Mapping	TRCITECR_EL1
+EndSysreg
+
 Sysreg	SMPRI_EL1	3	0	1	2	4
 Res0	63:4
 Field	3:0	PRIORITY
@@ -2226,7 +2880,28 @@ Field	15:0	MINLAT
 EndSysreg
 
 Sysreg	PMSIDR_EL1	3	0	9	9	7
-Res0	63:25
+Res0	63:33
+UnsignedEnum	32	SME
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	31:28	ALTCLK
+	0b0000	NI
+	0b0001	IMP
+	0b1111	IMPDEF
+EndEnum
+UnsignedEnum	27	FPF
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	26	EFT
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	25	CRR
+	0b0	NI
+	0b1	IMP
+EndEnum
 Field	24	PBT
 Field	23:20	FORMAT
 Enum	19:16	COUNTSIZE
@@ -2244,7 +2919,10 @@ Enum	11:8	INTERVAL
 	0b0111	3072
 	0b1000	4096
 EndEnum
-Res0	7
+UnsignedEnum	7	FDS
+	0b0	NI
+	0b1	IMP
+EndEnum
 Field	6	FnE
 Field	5	ERND
 Field	4	LDS
@@ -2287,6 +2965,16 @@ Field	16	COLL
 Field	15:0	MSS
 EndSysreg
 
+Sysreg	PMSDSFR_EL1	3	0	9	10	4
+Field	63:0	S
+EndSysreg
+
+Sysreg	PMBMAR_EL1	3	0	9	10	5
+Res0	63:10
+Field	9:8	SH
+Field	7:0	Attr
+EndSysreg
+
 Sysreg	PMBIDR_EL1	3	0	9	10	7
 Res0	63:12
 Enum	11:8	EA
@@ -2300,6 +2988,21 @@ Field	4	P
 Field	3:0	ALIGN
 EndSysreg
 
+Sysreg	TRBMPAM_EL1	3	0	9	11	5
+Res0	63:27
+Field	26	EN
+Field	25:24	MPAM_SP
+Field	23:16	PMG
+Field	15:0	PARTID
+EndSysreg
+
+Sysreg	PMSSCR_EL1	3	0	9	13	3
+Res0	63:33
+Field	32	NC
+Res0	31:1
+Field	0	SS
+EndSysreg
+
 Sysreg	PMUACR_EL1	3	0	9	14	4
 Res0	63:33
 Field	32	F0
@@ -2307,11 +3010,29 @@ Field	31	C
 Field	30:0	P
 EndSysreg
 
+Sysreg	PMECR_EL1	3	0	9	14	5
+Res0	63:5
+Field	4:3	SSE
+Field	2	KPME
+Field	1:0	PMEE
+EndSysreg
+
+Sysreg	PMIAR_EL1	3	0	9	14	7
+Field	63:0	ADDRESS
+EndSysreg
+
 Sysreg	PMSELR_EL0	3	3	9	12	5
 Res0	63:5
 Field	4:0	SEL
 EndSysreg
 
+Sysreg	PMZR_EL0        3	3	9	13	4
+Res0	63:33
+Field	32	F0
+Field	31	C
+Field	30:0	P
+EndSysreg
+
 SysregFields	CONTEXTIDR_ELx
 Res0	63:32
 Field	31:0	PROCID
@@ -2450,7 +3171,110 @@ UnsignedEnum	2:0	F8S1
 EndEnum
 EndSysreg
 
-SysregFields	HFGxTR_EL2
+Sysreg	HCR_EL2		3	4	1	1	0
+Field	63:60	TWEDEL
+Field	59	TWEDEn
+Field	58	TID5
+Field	57	DCT
+Field	56	ATA
+Field	55	TTLBOS
+Field	54	TTLBIS
+Field	53	EnSCXT
+Field	52	TOCU
+Field	51	AMVOFFEN
+Field	50	TICAB
+Field	49	TID4
+Field	48	GPF
+Field	47	FIEN
+Field	46	FWB
+Field	45	NV2
+Field	44	AT
+Field	43	NV1
+Field	42	NV
+Field	41	API
+Field	40	APK
+Field	39	TME
+Field	38	MIOCNCE
+Field	37	TEA
+Field	36	TERR
+Field	35	TLOR
+Field	34	E2H
+Field	33	ID
+Field	32	CD
+Field	31	RW
+Field	30	TRVM
+Field	29	HCD
+Field	28	TDZ
+Field	27	TGE
+Field	26	TVM
+Field	25	TTLB
+Field	24	TPU
+Field	23	TPCP
+Field	22	TSW
+Field	21	TACR
+Field	20	TIDCP
+Field	19	TSC
+Field	18	TID3
+Field	17	TID2
+Field	16	TID1
+Field	15	TID0
+Field	14	TWE
+Field	13	TWI
+Field	12	DC
+UnsignedEnum	11:10	BSU
+	0b00	NONE
+	0b01	IS
+	0b10	OS
+	0b11	FS
+EndEnum
+Field	9	FB
+Field	8	VSE
+Field	7	VI
+Field	6	VF
+Field	5	AMO
+Field	4	IMO
+Field	3	FMO
+Field	2	PTW
+Field	1	SWIO
+Field	0	VM
+EndSysreg
+
+Sysreg MDCR_EL2		3	4	1	1	1
+Res0	63:51
+Field	50	EnSTEPOP
+Res0	49:44
+Field	43	EBWE
+Res0	42
+Field	41:40	PMEE
+Res0	39:37
+Field	36	HPMFZS
+Res0	35:32
+Field	31:30	PMSSE
+Field	29	HPMFZO
+Field	28	MTPME
+Field	27	TDCC
+Field	26	HLP
+Field	25:24	E2TB
+Field	23	HCCD
+Res0	22:20
+Field	19	TTRF
+Res0	18
+Field	17	HPMD
+Res0	16
+Field	15	EnSPM
+Field	14	TPMS
+Field	13:12	E2PB
+Field	11	TDRA
+Field	10	TDOSA
+Field	9	TDA
+Field	8	TDE
+Field	7	HPME
+Field	6	TPM
+Field	5	TPMCR
+Field	4:0	HPMN
+EndSysreg
+
+Sysreg HFGRTR_EL2	3	4	1	1	4
 Field	63	nAMAIR2_EL1
 Field	62	nMAIR2_EL1
 Field	61	nS2POR_EL1
@@ -2515,53 +3339,74 @@ Field	3	AMAIR_EL1
 Field	2	AIDR_EL1
 Field	1	AFSR1_EL1
 Field	0	AFSR0_EL1
-EndSysregFields
-
-Sysreg MDCR_EL2		3	4	1	1	1
-Res0	63:51
-Field	50	EnSTEPOP
-Res0	49:44
-Field	43	EBWE
-Res0	42
-Field	41:40	PMEE
-Res0	39:37
-Field	36	HPMFZS
-Res0	35:32
-Field	31:30	PMSSE
-Field	29	HPMFZO
-Field	28	MTPME
-Field	27	TDCC
-Field	26	HLP
-Field	25:24	E2TB
-Field	23	HCCD
-Res0	22:20
-Field	19	TTRF
-Res0	18
-Field	17	HPMD
-Res0	16
-Field	15	EnSPM
-Field	14	TPMS
-Field	13:12	E2PB
-Field	11	TDRA
-Field	10	TDOSA
-Field	9	TDA
-Field	8	TDE
-Field	7	HPME
-Field	6	TPM
-Field	5	TPMCR
-Field	4:0	HPMN
-EndSysreg
-
-Sysreg HFGRTR_EL2	3	4	1	1	4
-Fields	HFGxTR_EL2
 EndSysreg
 
 Sysreg HFGWTR_EL2	3	4	1	1	5
-Fields	HFGxTR_EL2
+Field	63	nAMAIR2_EL1
+Field	62	nMAIR2_EL1
+Field	61	nS2POR_EL1
+Field	60	nPOR_EL1
+Field	59	nPOR_EL0
+Field	58	nPIR_EL1
+Field	57	nPIRE0_EL1
+Field	56	nRCWMASK_EL1
+Field	55	nTPIDR2_EL0
+Field	54	nSMPRI_EL1
+Field	53	nGCS_EL1
+Field	52	nGCS_EL0
+Res0	51
+Field	50	nACCDATA_EL1
+Field	49	ERXADDR_EL1
+Field	48	ERXPFGCDN_EL1
+Field	47	ERXPFGCTL_EL1
+Res0	46
+Field	45	ERXMISCn_EL1
+Field	44	ERXSTATUS_EL1
+Field	43	ERXCTLR_EL1
+Res0	42
+Field	41	ERRSELR_EL1
+Res0	40
+Field	39	ICC_IGRPENn_EL1
+Field	38	VBAR_EL1
+Field	37	TTBR1_EL1
+Field	36	TTBR0_EL1
+Field	35	TPIDR_EL0
+Field	34	TPIDRRO_EL0
+Field	33	TPIDR_EL1
+Field	32	TCR_EL1
+Field	31	SCXTNUM_EL0
+Field	30	SCXTNUM_EL1
+Field	29	SCTLR_EL1
+Res0	28
+Field	27	PAR_EL1
+Res0	26:25
+Field	24	MAIR_EL1
+Field	23	LORSA_EL1
+Field	22	LORN_EL1
+Res0	21
+Field	20	LOREA_EL1
+Field	19	LORC_EL1
+Res0	18
+Field	17	FAR_EL1
+Field	16	ESR_EL1
+Res0	15:14
+Field	13	CSSELR_EL1
+Field	12	CPACR_EL1
+Field	11	CONTEXTIDR_EL1
+Res0	10:9
+Field	8	APIBKey
+Field	7	APIAKey
+Field	6	APGAKey
+Field	5	APDBKey
+Field	4	APDAKey
+Field	3	AMAIR_EL1
+Res0	2
+Field	1	AFSR1_EL1
+Field	0	AFSR0_EL1
 EndSysreg
 
 Sysreg HFGITR_EL2	3	4	1	1	6
-Res0	63
+Field   63	PSBCSYNC
 Field	62	ATS1E1A
 Res0	61
 Field	60	COSPRCTX
@@ -2971,6 +3816,12 @@ Sysreg	SMCR_EL2	3	4	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	VNCR_EL2	3	4	2	2	0
+Field	63:57	RESS
+Field	56:12	BADDR
+Res0	11:0
+EndSysreg
+
 Sysreg	GCSCR_EL2	3	4	2	5	0
 Fields	GCSCR_ELx
 EndSysreg
@@ -3244,6 +4095,60 @@ Sysreg	TTBR1_EL1	3	0	2	0	1
 Fields	TTBRx_EL1
 EndSysreg
 
+Sysreg	TCR_EL1		3	0	2	0	2
+Res0    63:62
+Field   61      MTX1
+Field   60      MTX0
+Field   59      DS
+Field   58      TCMA1
+Field   57      TCMA0
+Field   56      E0PD1
+Field   55      E0PD0
+Field   54      NFD1
+Field   53      NFD0
+Field   52      TBID1
+Field   51      TBID0
+Field   50      HWU162
+Field   49      HWU161
+Field   48      HWU160
+Field   47      HWU159
+Field   46      HWU062
+Field   45      HWU061
+Field   44      HWU060
+Field   43      HWU059
+Field   42      HPD1
+Field   41      HPD0
+Field   40      HD
+Field   39      HA
+Field   38      TBI1
+Field   37      TBI0
+Field   36      AS
+Res0    35
+Field   34:32   IPS
+Field   31:30   TG1
+Field   29:28   SH1
+Field   27:26   ORGN1
+Field   25:24   IRGN1
+Field   23      EPD1
+Field   22      A1
+Field   21:16   T1SZ
+Field   15:14   TG0
+Field   13:12   SH0
+Field   11:10   ORGN0
+Field   9:8     IRGN0
+Field   7       EPD0
+Res0    6
+Field   5:0     T0SZ
+EndSysreg
+
+Sysreg	TCR_EL12        3	5	2	0	2
+Mapping	TCR_EL1
+EndSysreg
+
+Sysreg	TCRALIAS_EL1    3	0	2	7	6
+Mapping	TCR_EL1
+EndSysreg
+
 Sysreg	TCR2_EL1	3	0	2	0	3
 Res0	63:16
 Field	15	DisCH1
@@ -3264,6 +4169,10 @@ Sysreg	TCR2_EL12	3	5	2	0	3
 Mapping	TCR2_EL1
 EndSysreg
 
+Sysreg	TCR2ALIAS_EL1   3	0	2	7	7
+Mapping	TCR2_EL1
+EndSysreg
+
 Sysreg	TCR2_EL2	3	4	2	0	3
 Res0	63:16
 Field	15	DisCH1
@@ -3525,7 +4434,12 @@ Field	31:0	TRG
 EndSysreg
 
 Sysreg	TRBIDR_EL1	3	0	9	11	7
-Res0	63:12
+Res0	63:16
+UnsignedEnum	15:12	MPAM
+	0b0000	NI
+	0b0001	DEFAULT
+	0b0010	IMP
+EndEnum
 Enum	11:8	EA
 	0b0000	NON_DESC
 	0b0001	IGNORE
diff --git linux-libre-6.15-gnu/arch/arm64/xen/hypercall.S linux-libre-6.16-gnu/arch/arm64/xen/hypercall.S
index 9d01361696a1..ae551b857137 100644
--- linux-libre-6.15-gnu/arch/arm64/xen/hypercall.S
+++ linux-libre-6.16-gnu/arch/arm64/xen/hypercall.S
@@ -83,7 +83,26 @@ HYPERCALL3(vcpu_op);
 HYPERCALL1(platform_op_raw);
 HYPERCALL2(multicall);
 HYPERCALL2(vm_assist);
-HYPERCALL3(dm_op);
+
+SYM_FUNC_START(HYPERVISOR_dm_op)
+	mov x16, #__HYPERVISOR_dm_op;	\
+	/*
+	 * dm_op hypercalls are issued by the userspace. The kernel needs to
+	 * enable access to TTBR0_EL1 as the hypervisor would issue stage 1
+	 * translations to user memory via AT instructions. Since AT
+	 * instructions are not affected by the PAN bit (ARMv8.1), we only
+	 * need the explicit uaccess_enable/disable if the TTBR0 PAN emulation
+	 * is enabled (it implies that hardware UAO and PAN disabled).
+	 */
+	uaccess_ttbr0_enable x6, x7, x8
+	hvc XEN_IMM
+
+	/*
+	 * Disable userspace access from kernel once the hyp call completed.
+	 */
+	uaccess_ttbr0_disable x6, x7
+	ret
+SYM_FUNC_END(HYPERVISOR_dm_op);
 
 SYM_FUNC_START(privcmd_call)
 	mov x16, x0
diff --git linux-libre-6.15-gnu/arch/csky/include/asm/pgalloc.h linux-libre-6.16-gnu/arch/csky/include/asm/pgalloc.h
index 11055c574968..9ed2b15ffd94 100644
--- linux-libre-6.15-gnu/arch/csky/include/asm/pgalloc.h
+++ linux-libre-6.16-gnu/arch/csky/include/asm/pgalloc.h
@@ -29,7 +29,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 	pte_t *pte;
 	unsigned long i;
 
-	pte = (pte_t *) __get_free_page(GFP_KERNEL);
+	pte = __pte_alloc_one_kernel(mm);
 	if (!pte)
 		return NULL;
 
diff --git linux-libre-6.15-gnu/arch/csky/include/asm/pgtable.h linux-libre-6.16-gnu/arch/csky/include/asm/pgtable.h
index a397e1718ab6..5a394be09c35 100644
--- linux-libre-6.15-gnu/arch/csky/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/csky/include/asm/pgtable.h
@@ -200,7 +200,7 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	return pte;
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -249,11 +249,6 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
 	return __pgprot(prot);
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
diff --git linux-libre-6.15-gnu/arch/csky/include/asm/syscall.h linux-libre-6.16-gnu/arch/csky/include/asm/syscall.h
index 0de5734950bf..717f44b4d26f 100644
--- linux-libre-6.15-gnu/arch/csky/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/csky/include/asm/syscall.h
@@ -59,6 +59,19 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	memcpy(args, &regs->a1, 5 * sizeof(args[0]));
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      const unsigned long *args)
+{
+	memcpy(&regs->a0, args, 6 * sizeof(regs->a0));
+	/*
+	 * Also copy the first argument into orig_a0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->orig_a0 = regs->a0;
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git linux-libre-6.15-gnu/arch/csky/kernel/Makefile linux-libre-6.16-gnu/arch/csky/kernel/Makefile
index de1c3472e8f0..a406a4ac2378 100644
--- linux-libre-6.15-gnu/arch/csky/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/csky/kernel/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o entry.o atomic.o signal.o traps.o irq.o time.o vdso.o vdso/
 obj-y += power.o syscall.o syscall_table.o setup.o
diff --git linux-libre-6.15-gnu/arch/csky/kernel/perf_event.c linux-libre-6.16-gnu/arch/csky/kernel/perf_event.c
index e5f18420ce64..e0a36acd265b 100644
--- linux-libre-6.15-gnu/arch/csky/kernel/perf_event.c
+++ linux-libre-6.16-gnu/arch/csky/kernel/perf_event.c
@@ -1139,8 +1139,7 @@ static irqreturn_t csky_pmu_handle_irq(int irq_num, void *dev)
 		perf_sample_data_init(&data, 0, hwc->last_period);
 		csky_pmu_event_set_period(event);
 
-		if (perf_event_overflow(event, &data, regs))
-			csky_pmu_stop_event(event);
+		perf_event_overflow(event, &data, regs);
 	}
 
 	csky_pmu_enable(&csky_pmu.pmu);
diff --git linux-libre-6.15-gnu/arch/hexagon/include/asm/pgtable.h linux-libre-6.16-gnu/arch/hexagon/include/asm/pgtable.h
index 8c5b7a1c3d90..fbf24d1d1ca6 100644
--- linux-libre-6.15-gnu/arch/hexagon/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/hexagon/include/asm/pgtable.h
@@ -238,9 +238,6 @@ static inline int pte_present(pte_t pte)
 	return pte_val(pte) & _PAGE_PRESENT;
 }
 
-/* mk_pte - make a PTE out of a page pointer and protection bits */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 /* pte_page - returns a page (frame pointer/descriptor?) based on a PTE */
 #define pte_page(x) pfn_to_page(pte_pfn(x))
 
@@ -390,7 +387,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 		(((type & 0x1f) << 1) | \
 		 ((offset & 0x3ffff8) << 10) | ((offset & 0x7) << 7)) })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/hexagon/include/asm/syscall.h linux-libre-6.16-gnu/arch/hexagon/include/asm/syscall.h
index f6e454f18038..70637261817a 100644
--- linux-libre-6.15-gnu/arch/hexagon/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/hexagon/include/asm/syscall.h
@@ -26,6 +26,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->r06;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->r06 = nr;
+}
+
 static inline void syscall_get_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
 					 unsigned long *args)
@@ -33,6 +40,13 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &(&regs->r00)[0], 6 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	memcpy(&(&regs->r00)[0], args, 6 * sizeof(args[0]));
+}
+
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
@@ -45,6 +59,13 @@ static inline long syscall_get_return_value(struct task_struct *task,
 	return regs->r00;
 }
 
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->r00 = (long) error ?: val;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_HEXAGON;
diff --git linux-libre-6.15-gnu/arch/hexagon/kernel/Makefile linux-libre-6.16-gnu/arch/hexagon/kernel/Makefile
index 3fdf937eb572..8e0fb4a62315 100644
--- linux-libre-6.15-gnu/arch/hexagon/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/hexagon/kernel/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o
 obj-$(CONFIG_SMP) += smp.o
diff --git linux-libre-6.15-gnu/arch/loongarch/Kconfig linux-libre-6.16-gnu/arch/loongarch/Kconfig
index 1a2cf012b8f2..4b19f93379a1 100644
--- linux-libre-6.15-gnu/arch/loongarch/Kconfig
+++ linux-libre-6.16-gnu/arch/loongarch/Kconfig
@@ -69,6 +69,7 @@ config LOONGARCH
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_LTO_CLANG
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_RT
 	select ARCH_USE_BUILTIN_BSWAP
@@ -123,6 +124,7 @@ config LOONGARCH
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
@@ -187,6 +189,7 @@ config LOONGARCH
 	select MODULES_USE_ELF_RELA if MODULES
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_PER_CPU_PAGE_FIRST_CHUNK
+	select NUMA_MEMBLKS if NUMA
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI
@@ -456,6 +459,15 @@ config SCHED_SMT
 	  Improves scheduler's performance when there are multiple
 	  threads in one physical core.
 
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on SMP
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places.
+
 config SMP
 	bool "Multi-Processing support"
 	help
@@ -485,10 +497,10 @@ config HOTPLUG_CPU
 	  Say N if you want to disable CPU hotplug.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-256)"
-	range 2 256
+	int "Maximum number of CPUs (2-2048)"
+	range 2 2048
+	default "2048"
 	depends on SMP
-	default "64"
 	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.
diff --git linux-libre-6.15-gnu/arch/loongarch/Makefile linux-libre-6.16-gnu/arch/loongarch/Makefile
index 0304eabbe606..b0703a4e02a2 100644
--- linux-libre-6.15-gnu/arch/loongarch/Makefile
+++ linux-libre-6.16-gnu/arch/loongarch/Makefile
@@ -181,11 +181,14 @@ vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
 
 install:
-	$(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/$(image-name-y)-$(KERNELRELEASE)
-	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
-	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
+	$(call cmd,install)
 
 define archhelp
-	echo '  install              - install kernel into $(INSTALL_PATH)'
+	echo '  vmlinux.elf    - Uncompressed ELF kernel image (arch/loongarch/boot/vmlinux.elf)'
+	echo '  vmlinux.efi    - Uncompressed EFI kernel image (arch/loongarch/boot/vmlinux.efi)'
+	echo '  vmlinuz.efi    - GZIP/ZSTD-compressed EFI kernel image (arch/loongarch/boot/vmlinuz.efi)'
+	echo '                   Default when CONFIG_EFI_ZBOOT=y'
+	echo '  install        - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or'
+	echo '                   (distribution) /sbin/$(INSTALLKERNEL) or install.sh to $$(INSTALL_PATH)'
 	echo
 endef
diff --git linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi
index 3b38ff8853a7..760c60eebb89 100644
--- linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi
+++ linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -169,6 +169,166 @@
 			interrupts = <3>;
 		};
 
+		pwm@1ff5c000 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c010 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c020 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c030 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c040 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c040 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c050 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c050 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c060 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c060 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c070 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c070 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c080 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c080 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c090 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c090 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0a0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0a0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0b0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0b0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0c0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0c0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0d0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0d0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0e0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0e0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0f0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0f0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		gmac0: ethernet@1f020000 {
 			compatible = "snps,dwmac-3.70a";
 			reg = <0x0 0x1f020000 0x0 0x10000>;
diff --git linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
index 3514ea78f525..78ea995abf1c 100644
--- linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
+++ linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "dt-bindings/thermal/thermal.h"
 #include "loongson-2k1000.dtsi"
 
 / {
@@ -38,6 +39,13 @@
 			linux,cma-default;
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <255 153 85 25>;
+		pwms = <&pwm1 0 100000 0>;
+		#cooling-cells = <2>;
+	};
 };
 
 &gmac0 {
@@ -92,6 +100,22 @@
 	#size-cells = <0>;
 };
 
+&pwm1 {
+	status = "okay";
+
+	pinctrl-0 = <&pwm1_pins_default>;
+	pinctrl-names = "default";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
diff --git linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 8dff2aa52417..1da3beb00f0e 100644
--- linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -68,7 +68,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tsensor 0>;
@@ -322,6 +322,46 @@
 			status = "disabled";
 		};
 
+		pwm@1fe22000 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@1fe22010 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22020 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22030 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pmc: power-management@1fe27000 {
 			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x1fe27000 0x0 0x58>;
diff --git linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index b4ff55a33e90..9e0411f2754c 100644
--- linux-libre-6.15-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ linux-libre-6.16-gnu/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -165,6 +165,66 @@
 			interrupt-parent = <&eiointc>;
 		};
 
+		pwm@100a0000 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0000 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0100 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0100 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0200 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0200 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0300 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0300 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0400 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0400 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0500 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0500 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rtc0: rtc@100d0100 {
 			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
 			reg = <0x0 0x100d0100 0x0 0x100>;
diff --git linux-libre-6.15-gnu/arch/loongarch/boot/install.sh linux-libre-6.16-gnu/arch/loongarch/boot/install.sh
new file mode 100755
index 000000000000..daac197d3315
--- /dev/null
+++ linux-libre-6.16-gnu/arch/loongarch/boot/install.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the LoongArch Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+set -e
+
+case "${2##*/}" in
+vmlinux.elf)
+  echo "Installing uncompressed vmlinux.elf kernel"
+  base=vmlinux
+  ;;
+vmlinux.efi)
+  echo "Installing uncompressed vmlinux.efi kernel"
+  base=vmlinux
+  ;;
+vmlinuz.efi)
+  echo "Installing gzip/zstd compressed vmlinuz.efi kernel"
+  base=vmlinuz
+  ;;
+*)
+ echo "Warning: Unexpected kernel type"
+ exit 1
+ ;;
+esac
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
+
+# Install kernel config file
+if [ -f $4/config-$1 ]; then
+  mv $4/config-$1 $4/config-$1.old
+fi
+cp .config $4/config-$1
diff --git linux-libre-6.15-gnu/arch/loongarch/configs/loongson3_defconfig linux-libre-6.16-gnu/arch/loongarch/configs/loongson3_defconfig
index 90f21dfe22b1..0d59af6007b7 100644
--- linux-libre-6.15-gnu/arch/loongarch/configs/loongson3_defconfig
+++ linux-libre-6.16-gnu/arch/loongarch/configs/loongson3_defconfig
@@ -1026,7 +1026,7 @@ CONFIG_SECURITY_APPARMOR=y
 CONFIG_SECURITY_YAMA=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_CRYPTO_USER=m
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/acpi.h linux-libre-6.16-gnu/arch/loongarch/include/asm/acpi.h
index 313f66f7913a..7376840fa9f7 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/acpi.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/acpi.h
@@ -33,7 +33,7 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
-#define MAX_CORE_PIC 256
+#define MAX_CORE_PIC 2048
 
 extern struct list_head acpi_wakeup_device_list;
 extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/addrspace.h linux-libre-6.16-gnu/arch/loongarch/include/asm/addrspace.h
index fe198b473f84..e739dbc6329d 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/addrspace.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/addrspace.h
@@ -18,12 +18,12 @@
 /*
  * This gives the physical RAM offset.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifndef PHYS_OFFSET
 #define PHYS_OFFSET	_UL(0)
 #endif
 extern unsigned long vm_map_base;
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifndef IO_BASE
 #define IO_BASE			CSR_DMW0_BASE
@@ -66,7 +66,7 @@ extern unsigned long vm_map_base;
 #define FIXADDR_TOP		((unsigned long)(long)(int)0xfffe0000)
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ATYPE_
 #define _ATYPE32_
 #define _ATYPE64_
@@ -85,7 +85,7 @@ extern unsigned long vm_map_base;
 /*
  *  32/64-bit LoongArch address spaces
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ACAST32_
 #define _ACAST64_
 #else
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/alternative-asm.h linux-libre-6.16-gnu/arch/loongarch/include/asm/alternative-asm.h
index ff3d10ac393f..7dc29bd9b2f0 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/alternative-asm.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/alternative-asm.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ALTERNATIVE_ASM_H
 #define _ASM_ALTERNATIVE_ASM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/asm.h>
 
@@ -77,6 +77,6 @@
 	.previous
 .endm
 
-#endif  /*  __ASSEMBLY__  */
+#endif  /*  __ASSEMBLER__  */
 
 #endif /* _ASM_ALTERNATIVE_ASM_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/alternative.h linux-libre-6.16-gnu/arch/loongarch/include/asm/alternative.h
index cee7b29785ab..b5bae21fb3c8 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/alternative.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/alternative.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ALTERNATIVE_H
 #define _ASM_ALTERNATIVE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/stddef.h>
@@ -106,6 +106,6 @@ extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
 #define alternative_2(oldinstr, newinstr1, feature1, newinstr2, feature2) \
 	(asm volatile(ALTERNATIVE_2(oldinstr, newinstr1, feature1, newinstr2, feature2) ::: "memory"))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_ALTERNATIVE_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/asm-extable.h linux-libre-6.16-gnu/arch/loongarch/include/asm/asm-extable.h
index df05005f2b80..d60bdf2e6377 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/asm-extable.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/asm-extable.h
@@ -7,7 +7,7 @@
 #define EX_TYPE_UACCESS_ERR_ZERO	2
 #define EX_TYPE_BPF			3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
 	.pushsection	__ex_table, "a";		\
@@ -22,7 +22,7 @@
 	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
 	.endm
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #include <linux/bits.h>
 #include <linux/stringify.h>
@@ -60,6 +60,6 @@
 #define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
 	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ASM_EXTABLE_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/asm-prototypes.h linux-libre-6.16-gnu/arch/loongarch/include/asm/asm-prototypes.h
index 51f224bcfc65..704066b4f736 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/asm-prototypes.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/asm-prototypes.h
@@ -12,3 +12,11 @@ __int128_t __ashlti3(__int128_t a, int b);
 __int128_t __ashrti3(__int128_t a, int b);
 __int128_t __lshrti3(__int128_t a, int b);
 #endif
+
+asmlinkage void noinstr __no_stack_protector ret_from_fork(struct task_struct *prev,
+							   struct pt_regs *regs);
+
+asmlinkage void noinstr __no_stack_protector ret_from_kernel_thread(struct task_struct *prev,
+								    struct pt_regs *regs,
+								    int (*fn)(void *),
+								    void *fn_arg);
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/asm.h linux-libre-6.16-gnu/arch/loongarch/include/asm/asm.h
index f591b3245def..f018d26fc995 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/asm.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/asm.h
@@ -110,7 +110,7 @@
 #define LONG_SRA	srai.w
 #define LONG_SRAV	sra.w
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.word
 #endif
 #define LONGSIZE	4
@@ -131,7 +131,7 @@
 #define LONG_SRA	srai.d
 #define LONG_SRAV	sra.d
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.dword
 #endif
 #define LONGSIZE	8
@@ -158,7 +158,7 @@
 
 #define PTR_SCALESHIFT	2
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define PTR		.word
 #endif
 #define PTRSIZE		4
@@ -181,7 +181,7 @@
 
 #define PTR_SCALESHIFT	3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define PTR		.dword
 #endif
 #define PTRSIZE		8
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/cpu.h linux-libre-6.16-gnu/arch/loongarch/include/asm/cpu.h
index 98cf4d7b4b0a..dfb982fe8701 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/cpu.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/cpu.h
@@ -46,7 +46,7 @@
 
 #define PRID_PRODUCT_MASK	0x0fff
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 enum cpu_type_enum {
 	CPU_UNKNOWN,
@@ -55,7 +55,7 @@ enum cpu_type_enum {
 	CPU_LAST
 };
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * ISA Level encodings
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/entry-common.h linux-libre-6.16-gnu/arch/loongarch/include/asm/entry-common.h
index 0fe2a098ded9..099132980dc9 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/entry-common.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/entry-common.h
@@ -2,12 +2,6 @@
 #ifndef ARCH_LOONGARCH_ENTRY_COMMON_H
 #define ARCH_LOONGARCH_ENTRY_COMMON_H
 
-#include <linux/sched.h>
-#include <linux/processor.h>
-
-static inline bool on_thread_stack(void)
-{
-	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
-}
+#include <asm/stacktrace.h> /* For on_thread_stack() */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/ftrace.h linux-libre-6.16-gnu/arch/loongarch/include/asm/ftrace.h
index 6e0a99763a9a..f4caaf764f9e 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/ftrace.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/ftrace.h
@@ -14,7 +14,7 @@
 
 #define MCOUNT_INSN_SIZE 4		/* sizeof mcount call */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifndef CONFIG_DYNAMIC_FTRACE
 
@@ -84,7 +84,7 @@ __arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
 
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* CONFIG_FUNCTION_TRACER */
 
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/gpr-num.h linux-libre-6.16-gnu/arch/loongarch/include/asm/gpr-num.h
index 996038da806d..af95b941f48b 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/gpr-num.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/gpr-num.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_GPR_NUM_H
 #define __ASM_GPR_NUM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.equ	.L__gpr_num_zero, 0
 	.irp	num,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
@@ -25,7 +25,7 @@
 	.equ	.L__gpr_num_$s\num, 23 + \num
 	.endr
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define __DEFINE_ASM_GPR_NUMS					\
 "	.equ	.L__gpr_num_zero, 0\n"				\
@@ -47,6 +47,6 @@
 "	.equ	.L__gpr_num_$s\\num, 23 + \\num\n"		\
 "	.endr\n"						\
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_GPR_NUM_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/irqflags.h linux-libre-6.16-gnu/arch/loongarch/include/asm/irqflags.h
index 319a8c616f1f..620163628a7f 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/irqflags.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/irqflags.h
@@ -5,7 +5,7 @@
 #ifndef _ASM_IRQFLAGS_H
 #define _ASM_IRQFLAGS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <linux/stringify.h>
@@ -14,40 +14,48 @@
 static inline void arch_local_irq_enable(void)
 {
 	u32 flags = CSR_CRMD_IE;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
 static inline void arch_local_irq_disable(void)
 {
 	u32 flags = 0;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
 static inline unsigned long arch_local_irq_save(void)
 {
 	u32 flags = 0;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 	return flags;
 }
 
 static inline void arch_local_irq_restore(unsigned long flags)
 {
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
@@ -72,6 +80,6 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
-#endif /* #ifndef __ASSEMBLY__ */
+#endif /* #ifndef __ASSEMBLER__ */
 
 #endif /* _ASM_IRQFLAGS_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/jump_label.h linux-libre-6.16-gnu/arch/loongarch/include/asm/jump_label.h
index 8a924bd69d19..4000c7603d8e 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/jump_label.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/jump_label.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_JUMP_LABEL_H
 #define __ASM_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -50,5 +50,5 @@ l_yes:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif	/* __ASM_JUMP_LABEL_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/kasan.h linux-libre-6.16-gnu/arch/loongarch/include/asm/kasan.h
index 7f52bd31b9d4..62f139a9c87d 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/kasan.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/kasan.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_KASAN_H
 #define __ASM_KASAN_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/linkage.h>
 #include <linux/mmzone.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/kvm_host.h linux-libre-6.16-gnu/arch/loongarch/include/asm/kvm_host.h
index f457c2662e2f..a3c4cc46c892 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/kvm_host.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/kvm_host.h
@@ -301,7 +301,7 @@ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu);
 /* MMU handling */
 void kvm_flush_tlb_all(void);
 void kvm_flush_tlb_gpa(struct kvm_vcpu *vcpu, unsigned long gpa);
-int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write);
+int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write, int ecode);
 
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end, bool blockable);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/kvm_vcpu.h linux-libre-6.16-gnu/arch/loongarch/include/asm/kvm_vcpu.h
index 2c349f961bfb..f1efd7cfbc20 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/kvm_vcpu.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/kvm_vcpu.h
@@ -37,7 +37,7 @@
 #define KVM_LOONGSON_IRQ_NUM_MASK	0xffff
 
 typedef union loongarch_instruction  larch_inst;
-typedef int (*exit_handle_fn)(struct kvm_vcpu *);
+typedef int (*exit_handle_fn)(struct kvm_vcpu *, int);
 
 int  kvm_emu_mmio_read(struct kvm_vcpu *vcpu, larch_inst inst);
 int  kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst);
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/loongarch.h linux-libre-6.16-gnu/arch/loongarch/include/asm/loongarch.h
index 52651aa0e583..a0994d226eff 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/loongarch.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/loongarch.h
@@ -9,15 +9,15 @@
 #include <linux/linkage.h>
 #include <linux/types.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <larchintrin.h>
 
 /* CPUCFG */
 #define read_cpucfg(reg) __cpucfg(reg)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* LoongArch Registers */
 #define REG_ZERO	0x0
@@ -53,7 +53,7 @@
 #define REG_S7		0x1e
 #define REG_S8		0x1f
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* Bit fields for CPUCFG registers */
 #define LOONGARCH_CPUCFG0		0x0
@@ -171,7 +171,7 @@
  * SW emulation for KVM hypervirsor, see arch/loongarch/include/uapi/asm/kvm_para.h
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* CSR */
 #define csr_read32(reg) __csrrd_w(reg)
@@ -187,7 +187,7 @@
 #define iocsr_write32(val, reg) __iocsrwr_w(val, reg)
 #define iocsr_write64(val, reg) __iocsrwr_d(val, reg)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* CSR register number */
 
@@ -411,8 +411,8 @@
 
 /* Config CSR registers */
 #define LOONGARCH_CSR_CPUID		0x20	/* CPU core id */
-#define  CSR_CPUID_COREID_WIDTH		9
-#define  CSR_CPUID_COREID		_ULCAST_(0x1ff)
+#define  CSR_CPUID_COREID_WIDTH		11
+#define  CSR_CPUID_COREID		_ULCAST_(0x7ff)
 
 #define LOONGARCH_CSR_PRCFG1		0x21	/* Config1 */
 #define  CSR_CONF1_VSMAX_SHIFT		12
@@ -1195,7 +1195,7 @@
 #define LOONGARCH_IOCSR_EXTIOI_ROUTE_BASE	0x1c00
 #define IOCSR_EXTIOI_VECTOR_NUM			256
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static __always_inline u64 drdtime(void)
 {
@@ -1357,7 +1357,7 @@ __BUILD_CSR_OP(tlbidx)
 #define clear_csr_estat(val)	\
 	csr_xchg32(~(val), val, LOONGARCH_CSR_ESTAT)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* Generic EntryLo bit definitions */
 #define ENTRYLO_V		(_ULCAST_(1) << 0)
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/numa.h linux-libre-6.16-gnu/arch/loongarch/include/asm/numa.h
index b5f9de9f102e..bbf9f70bd25f 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/numa.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/numa.h
@@ -22,20 +22,6 @@ extern int numa_off;
 extern s16 __cpuid_to_node[CONFIG_NR_CPUS];
 extern nodemask_t numa_nodes_parsed __initdata;
 
-struct numa_memblk {
-	u64			start;
-	u64			end;
-	int			nid;
-};
-
-#define NR_NODE_MEMBLKS		(MAX_NUMNODES*2)
-struct numa_meminfo {
-	int			nr_blks;
-	struct numa_memblk	blk[NR_NODE_MEMBLKS];
-};
-
-extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-
 extern void __init early_numa_add_cpu(int cpuid, s16 node);
 extern void numa_add_cpu(unsigned int cpu);
 extern void numa_remove_cpu(unsigned int cpu);
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/orc_types.h linux-libre-6.16-gnu/arch/loongarch/include/asm/orc_types.h
index caf1f71a1057..d5fa98d1d177 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/orc_types.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/orc_types.h
@@ -34,7 +34,7 @@
 #define ORC_TYPE_REGS			3
 #define ORC_TYPE_REGS_PARTIAL		4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * This struct is more or less a vastly simplified version of the DWARF Call
  * Frame Information standard.  It contains only the necessary parts of DWARF
@@ -53,6 +53,6 @@ struct orc_entry {
 	unsigned int	type:3;
 	unsigned int	signal:1;
 };
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ORC_TYPES_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/page.h linux-libre-6.16-gnu/arch/loongarch/include/asm/page.h
index 7368f12b7cb1..a3aaf34fba16 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/page.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/page.h
@@ -15,7 +15,7 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/kernel.h>
 #include <linux/pfn.h>
@@ -110,6 +110,6 @@ extern int __virt_addr_valid(volatile void *kaddr);
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PAGE_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/pgalloc.h linux-libre-6.16-gnu/arch/loongarch/include/asm/pgalloc.h
index b58f587f0f0a..1c63a9d9a6d3 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/pgalloc.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/pgalloc.h
@@ -69,7 +69,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 	if (!ptdesc)
 		return NULL;
 
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/pgtable-bits.h linux-libre-6.16-gnu/arch/loongarch/include/asm/pgtable-bits.h
index 45bfc65a0c9f..7bbfb04a54cc 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/pgtable-bits.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/pgtable-bits.h
@@ -92,7 +92,7 @@
 #define PAGE_KERNEL_WUC __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
 				 _PAGE_GLOBAL | _PAGE_KERN |  _CACHE_WUC)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define _PAGE_IOREMAP		pgprot_val(PAGE_KERNEL_SUC)
 
@@ -127,6 +127,6 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
 	return __pgprot(prot);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PGTABLE_BITS_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/pgtable.h linux-libre-6.16-gnu/arch/loongarch/include/asm/pgtable.h
index da346733a1da..f2aeff544cee 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/pgtable.h
@@ -55,7 +55,7 @@
 
 #define USER_PTRS_PER_PGD       ((TASK_SIZE64 / PGDIR_SIZE)?(TASK_SIZE64 / PGDIR_SIZE):1)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/mm_types.h>
 #include <linux/mmzone.h>
@@ -255,7 +255,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #define pmd_page_vaddr(pmd)	pmd_val(pmd)
 
-extern pmd_t mk_pmd(struct page *page, pgprot_t prot);
 extern void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pmd_t pmd);
 
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
@@ -302,7 +301,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 #define __pmd_to_swp_entry(pmd) ((swp_entry_t) { pmd_val(pmd) })
 #define __swp_entry_to_pmd(x)	((pmd_t) { (x).val | _PAGE_HUGE })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -426,12 +425,6 @@ static inline unsigned long pte_accessible(struct mm_struct *mm, pte_t a)
 	return false;
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
@@ -625,6 +618,6 @@ static inline long pmd_protnone(pmd_t pmd)
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PGTABLE_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/prefetch.h linux-libre-6.16-gnu/arch/loongarch/include/asm/prefetch.h
index 1672262a5e2e..0b168cdaae9a 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/prefetch.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/prefetch.h
@@ -8,7 +8,7 @@
 #define Pref_Load	0
 #define Pref_Store	8
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.macro	__pref hint addr
 #ifdef CONFIG_CPU_HAS_PREFETCH
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/smp.h linux-libre-6.16-gnu/arch/loongarch/include/asm/smp.h
index b87d1d5e5890..3a47f52959a8 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/smp.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/smp.h
@@ -25,6 +25,7 @@ extern int smp_num_siblings;
 extern int num_processors;
 extern int disabled_cpus;
 extern cpumask_t cpu_sibling_map[];
+extern cpumask_t cpu_llc_shared_map[];
 extern cpumask_t cpu_core_map[];
 extern cpumask_t cpu_foreign_map[];
 
@@ -38,7 +39,7 @@ int loongson_cpu_disable(void);
 void loongson_cpu_die(unsigned int cpu);
 #endif
 
-static inline void plat_smp_setup(void)
+static inline void __init plat_smp_setup(void)
 {
 	loongson_smp_setup();
 }
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/sparsemem.h linux-libre-6.16-gnu/arch/loongarch/include/asm/sparsemem.h
index 8d4af6aff8a8..4501efac1a87 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/sparsemem.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/sparsemem.h
@@ -21,11 +21,6 @@
 #define VMEMMAP_SIZE	0	/* 1, For FLATMEM; 2, For SPARSEMEM without VMEMMAP. */
 #endif
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-int memory_add_physaddr_to_nid(u64 addr);
-#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
-#endif
-
 #define INIT_MEMBLOCK_RESERVED_REGIONS	(INIT_MEMBLOCK_REGIONS + NR_CPUS)
 
 #endif /* _LOONGARCH_SPARSEMEM_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/stackframe.h linux-libre-6.16-gnu/arch/loongarch/include/asm/stackframe.h
index 66736837085b..3eda298702b1 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/stackframe.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/stackframe.h
@@ -57,6 +57,12 @@
 	jirl	zero, \temp1, 0xc
 	.endm
 
+	.macro STACKLEAK_ERASE
+#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
+	bl	stackleak_erase_on_task_stack
+#endif
+	.endm
+
 	.macro BACKUP_T0T1
 	csrwr	t0, EXCEPTION_KS0
 	csrwr	t1, EXCEPTION_KS1
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/stacktrace.h linux-libre-6.16-gnu/arch/loongarch/include/asm/stacktrace.h
index fc8b64773794..5c8be156567c 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/stacktrace.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/stacktrace.h
@@ -31,6 +31,11 @@ bool in_irq_stack(unsigned long stack, struct stack_info *info);
 bool in_task_stack(unsigned long stack, struct task_struct *task, struct stack_info *info);
 int get_stack_info(unsigned long stack, struct task_struct *task, struct stack_info *info);
 
+static __always_inline bool on_thread_stack(void)
+{
+	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
+}
+
 #define STR_LONG_L    __stringify(LONG_L)
 #define STR_LONG_S    __stringify(LONG_S)
 #define STR_LONGSIZE  __stringify(LONGSIZE)
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/syscall.h linux-libre-6.16-gnu/arch/loongarch/include/asm/syscall.h
index e286dc58476e..81d2733f7b94 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/syscall.h
@@ -26,6 +26,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->regs[11];
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->regs[11] = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
@@ -61,6 +68,14 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(&args[1], &regs->regs[5], 5 * sizeof(long));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	regs->orig_a0 = args[0];
+	memcpy(&regs->regs[5], &args[1], 5 * sizeof(long));
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_LOONGARCH64;
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/thread_info.h linux-libre-6.16-gnu/arch/loongarch/include/asm/thread_info.h
index 4f5a9441754e..9dfa2ef00816 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/thread_info.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/thread_info.h
@@ -10,7 +10,7 @@
 
 #ifdef __KERNEL__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/processor.h>
 
@@ -53,7 +53,7 @@ static inline struct thread_info *current_thread_info(void)
 
 register unsigned long current_stack_pointer __asm__("$sp");
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* thread information allocation */
 #define THREAD_SIZE		SZ_16K
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/topology.h linux-libre-6.16-gnu/arch/loongarch/include/asm/topology.h
index 50273c9187d0..f06e7ff25bb7 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/topology.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/topology.h
@@ -19,17 +19,22 @@ extern int pcibus_to_node(struct pci_bus *);
 
 #define cpumask_of_pcibus(bus)	(cpu_online_mask)
 
-extern unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
-
-void numa_set_distance(int from, int to, int distance);
-
-#define node_distance(from, to)	(node_distances[(from)][(to)])
+int __node_distance(int from, int to);
+#define node_distance(from, to) __node_distance(from, to)
 
 #else
 #define pcibus_to_node(bus)	0
 #endif
 
 #ifdef CONFIG_SMP
+/*
+ * Return cpus that shares the last level cache.
+ */
+static inline const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+	return &cpu_llc_shared_map[cpu];
+}
+
 #define topology_physical_package_id(cpu)	(cpu_data[cpu].package)
 #define topology_core_id(cpu)			(cpu_data[cpu].core)
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/types.h linux-libre-6.16-gnu/arch/loongarch/include/asm/types.h
index baf15a0dcf8b..0edd731f3d6a 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/types.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/types.h
@@ -8,7 +8,7 @@
 #include <asm-generic/int-ll64.h>
 #include <uapi/asm/types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ULCAST_
 #define _U64CAST_
 #else
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/unwind_hints.h linux-libre-6.16-gnu/arch/loongarch/include/asm/unwind_hints.h
index 2c68bc72736c..16c7f7e465a0 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/unwind_hints.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/unwind_hints.h
@@ -5,7 +5,7 @@
 #include <linux/objtool.h>
 #include <asm/orc_types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro UNWIND_HINT_UNDEFINED
 	UNWIND_HINT type=UNWIND_HINT_TYPE_UNDEFINED
@@ -23,7 +23,7 @@
 	UNWIND_HINT sp_reg=ORC_REG_SP type=UNWIND_HINT_TYPE_CALL
 .endm
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 #define UNWIND_HINT_SAVE \
 	UNWIND_HINT(UNWIND_HINT_TYPE_SAVE, 0, 0, 0)
@@ -31,6 +31,6 @@
 #define UNWIND_HINT_RESTORE \
 	UNWIND_HINT(UNWIND_HINT_TYPE_RESTORE, 0, 0, 0)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_LOONGARCH_UNWIND_HINTS_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/arch_data.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/arch_data.h
index 322d0a5f1c84..395ec223bcbe 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/arch_data.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/arch_data.h
@@ -7,7 +7,7 @@
 #ifndef _VDSO_ARCH_DATA_H
 #define _VDSO_ARCH_DATA_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/asm.h>
 #include <asm/vdso.h>
@@ -20,6 +20,6 @@ struct vdso_arch_data {
 	struct vdso_pcpu_data pdata[NR_CPUS];
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/getrandom.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/getrandom.h
index 48c43f55b039..2ff05003c6e7 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/getrandom.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/getrandom.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_VDSO_GETRANDOM_H
 #define __ASM_VDSO_GETRANDOM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 #include <asm/vdso/vdso.h>
@@ -20,7 +20,7 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 
 	asm volatile(
 	"      syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (buffer), "r" (len), "r" (flags)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8",
 	  "memory");
@@ -28,6 +28,6 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 	return ret;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETRANDOM_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/gettimeofday.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/gettimeofday.h
index 88cfcf133116..dcafabca9bb6 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/gettimeofday.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/gettimeofday.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 #include <asm/vdso/vdso.h>
@@ -25,7 +25,7 @@ static __always_inline long gettimeofday_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (tv), "r" (tz)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -44,7 +44,7 @@ static __always_inline long clock_gettime_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (clkid), "r" (ts)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -63,7 +63,7 @@ static __always_inline int clock_getres_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (clkid), "r" (ts)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -89,6 +89,6 @@ static inline bool loongarch_vdso_hres_capable(void)
 }
 #define __arch_vdso_hres_capable loongarch_vdso_hres_capable
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/processor.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/processor.h
index ef5770b343a0..1e255373b0b8 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/processor.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/processor.h
@@ -5,10 +5,10 @@
 #ifndef __ASM_VDSO_PROCESSOR_H
 #define __ASM_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define cpu_relax()	barrier()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_PROCESSOR_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/vdso.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/vdso.h
index 50c65fb29daf..04bd2d452876 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/vdso.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/vdso.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_VDSO_VDSO_H
 #define _ASM_VDSO_VDSO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/asm.h>
 #include <asm/page.h>
@@ -16,6 +16,6 @@
 
 #define VVAR_SIZE (VDSO_NR_PAGES << PAGE_SHIFT)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/vsyscall.h linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/vsyscall.h
index 1140b54b4bc8..558eb9dfda52 100644
--- linux-libre-6.15-gnu/arch/loongarch/include/asm/vdso/vsyscall.h
+++ linux-libre-6.16-gnu/arch/loongarch/include/asm/vdso/vsyscall.h
@@ -2,13 +2,13 @@
 #ifndef __ASM_VDSO_VSYSCALL_H
 #define __ASM_VDSO_VSYSCALL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <vdso/datapage.h>
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_VSYSCALL_H */
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/Makefile linux-libre-6.16-gnu/arch/loongarch/kernel/Makefile
index f9dcaa60033d..6f5a4574a911 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/Makefile
@@ -5,7 +5,7 @@
 
 OBJECT_FILES_NON_STANDARD_head.o := y
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y		+= head.o cpu-probe.o cacheinfo.o env.o setup.o entry.o genex.o \
 		   traps.o irq.o idle.o process.o dma.o mem.o reset.o switch.o \
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/acpi.c linux-libre-6.16-gnu/arch/loongarch/kernel/acpi.c
index 1120ac2824f6..1367ca759468 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/acpi.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/acpi.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/efi-bgrt.h>
+#include <linux/export.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/memblock.h>
@@ -244,22 +245,6 @@ fdt_earlycon:
 
 #ifdef CONFIG_ACPI_NUMA
 
-static __init int setup_node(int pxm)
-{
-	return acpi_map_pxm_to_node(pxm);
-}
-
-void __init numa_set_distance(int from, int to, int distance)
-{
-	if ((u8)distance != distance || (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
-				from, to, distance);
-		return;
-	}
-
-	node_distances[from][to] = distance;
-}
-
 /* Callback for Proximity Domain -> CPUID mapping */
 void __init
 acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
@@ -280,7 +265,41 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		pxm |= (pa->proximity_domain_hi[1] << 16);
 		pxm |= (pa->proximity_domain_hi[2] << 24);
 	}
-	node = setup_node(pxm);
+	node = acpi_map_pxm_to_node(pxm);
+	if (node < 0) {
+		pr_err("SRAT: Too many proximity domains %x\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (pa->apic_id >= CONFIG_NR_CPUS) {
+		pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u skipped apicid that is too big\n",
+				pxm, pa->apic_id, node);
+		return;
+	}
+
+	early_numa_add_cpu(pa->apic_id, node);
+
+	set_cpuid_to_node(pa->apic_id, node);
+	node_set(node, numa_nodes_parsed);
+	pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u\n", pxm, pa->apic_id, node);
+}
+
+void __init
+acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
+{
+	int pxm, node;
+
+	if (srat_disabled())
+		return;
+	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;
+	pxm = pa->proximity_domain;
+	node = acpi_map_pxm_to_node(pxm);
 	if (node < 0) {
 		pr_err("SRAT: Too many proximity domains %x\n", pxm);
 		bad_srat();
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/alternative.c linux-libre-6.16-gnu/arch/loongarch/kernel/alternative.c
index 4ad13847e962..0e0c766df1e3 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/alternative.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/alternative.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <asm/alternative.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/efi-header.S linux-libre-6.16-gnu/arch/loongarch/kernel/efi-header.S
index 5f23b85d78ca..ba0bdbf86aa8 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/efi-header.S
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/efi-header.S
@@ -7,7 +7,7 @@
 #include <linux/sizes.h>
 
 	.macro	__EFI_PE_HEADER
-	.long	PE_MAGIC
+	.long	IMAGE_NT_SIGNATURE
 .Lcoff_header:
 	.short	IMAGE_FILE_MACHINE_LOONGARCH64		/* Machine */
 	.short	.Lsection_count				/* NumberOfSections */
@@ -20,7 +20,7 @@
 		IMAGE_FILE_LINE_NUMS_STRIPPED		/* Characteristics */
 
 .Loptional_header:
-	.short	PE_OPT_MAGIC_PE32PLUS			/* PE32+ format */
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC		/* PE32+ format */
 	.byte	0x02					/* MajorLinkerVersion */
 	.byte	0x14					/* MinorLinkerVersion */
 	.long	__inittext_end - .Lefi_header_end	/* SizeOfCode */
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/efi.c linux-libre-6.16-gnu/arch/loongarch/kernel/efi.c
index de21e72759ee..860a3bc030e0 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/efi.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/efi.c
@@ -144,6 +144,18 @@ void __init efi_init(void)
 		if (efi_memmap_init_early(&data) < 0)
 			panic("Unable to map EFI memory map.\n");
 
+		/*
+		 * Reserve the physical memory region occupied by the EFI
+		 * memory map table (header + descriptors). This is crucial
+		 * for kdump, as the kdump kernel relies on this original
+		 * memmap passed by the bootloader. Without reservation,
+		 * this region could be overwritten by the primary kernel.
+		 * Also, set the EFI_PRESERVE_BS_REGIONS flag to indicate that
+		 * critical boot services code/data regions like this are preserved.
+		 */
+		memblock_reserve((phys_addr_t)boot_memmap, sizeof(*tbl) + data.size);
+		set_bit(EFI_PRESERVE_BS_REGIONS, &efi.flags);
+
 		early_memunmap(tbl, sizeof(*tbl));
 	}
 
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/elf.c linux-libre-6.16-gnu/arch/loongarch/kernel/elf.c
index 0fa81ced28dc..3d98c6aa00db 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/elf.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/elf.c
@@ -6,7 +6,6 @@
 
 #include <linux/binfmts.h>
 #include <linux/elf.h>
-#include <linux/export.h>
 #include <linux/sched.h>
 
 #include <asm/cpu-features.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/entry.S linux-libre-6.16-gnu/arch/loongarch/kernel/entry.S
index 48e7e34e355e..47e1db9a1ce4 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/entry.S
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/entry.S
@@ -73,28 +73,29 @@ SYM_CODE_START(handle_syscall)
 	move		a0, sp
 	bl		do_syscall
 
+	STACKLEAK_ERASE
 	RESTORE_ALL_AND_RET
 SYM_CODE_END(handle_syscall)
 _ASM_NOKPROBE(handle_syscall)
 
-SYM_CODE_START(ret_from_fork)
+SYM_CODE_START(ret_from_fork_asm)
 	UNWIND_HINT_REGS
-	bl		schedule_tail		# a0 = struct task_struct *prev
-	move		a0, sp
-	bl 		syscall_exit_to_user_mode
+	move		a1, sp
+	bl 		ret_from_fork
+	STACKLEAK_ERASE
 	RESTORE_STATIC
 	RESTORE_SOME
 	RESTORE_SP_AND_RET
-SYM_CODE_END(ret_from_fork)
+SYM_CODE_END(ret_from_fork_asm)
 
-SYM_CODE_START(ret_from_kernel_thread)
+SYM_CODE_START(ret_from_kernel_thread_asm)
 	UNWIND_HINT_REGS
-	bl		schedule_tail		# a0 = struct task_struct *prev
-	move		a0, s1
-	jirl		ra, s0, 0
-	move		a0, sp
-	bl		syscall_exit_to_user_mode
+	move		a1, sp
+	move		a2, s0
+	move		a3, s1
+	bl		ret_from_kernel_thread
+	STACKLEAK_ERASE
 	RESTORE_STATIC
 	RESTORE_SOME
 	RESTORE_SP_AND_RET
-SYM_CODE_END(ret_from_kernel_thread)
+SYM_CODE_END(ret_from_kernel_thread_asm)
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/head.S linux-libre-6.16-gnu/arch/loongarch/kernel/head.S
index 506a99a5bbc7..e3865e92a917 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/head.S
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/head.S
@@ -20,7 +20,7 @@
 	__HEAD
 
 _head:
-	.word	MZ_MAGIC		/* "MZ", MS-DOS header */
+	.word	IMAGE_DOS_SIGNATURE	/* "MZ", MS-DOS header */
 	.org	0x8
 	.dword	_kernel_entry		/* Kernel entry point (physical address) */
 	.dword	_kernel_asize		/* Kernel image effective size */
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/kfpu.c linux-libre-6.16-gnu/arch/loongarch/kernel/kfpu.c
index 4c476904227f..141b49bd989c 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/kfpu.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/kfpu.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/cpu.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <asm/fpu.h>
 #include <asm/smp.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/numa.c linux-libre-6.16-gnu/arch/loongarch/kernel/numa.c
index 30a72fd528c0..d6e73e8f9c0b 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/numa.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/numa.c
@@ -11,6 +11,7 @@
 #include <linux/mmzone.h>
 #include <linux/export.h>
 #include <linux/nodemask.h>
+#include <linux/numa_memblks.h>
 #include <linux/swap.h>
 #include <linux/memblock.h>
 #include <linux/pfn.h>
@@ -27,10 +28,6 @@
 #include <asm/time.h>
 
 int numa_off;
-unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
-EXPORT_SYMBOL(node_distances);
-
-static struct numa_meminfo numa_meminfo;
 cpumask_t cpus_on_node[MAX_NUMNODES];
 cpumask_t phys_cpus_on_node[MAX_NUMNODES];
 EXPORT_SYMBOL(cpus_on_node);
@@ -43,8 +40,6 @@ s16 __cpuid_to_node[CONFIG_NR_CPUS] = {
 };
 EXPORT_SYMBOL(__cpuid_to_node);
 
-nodemask_t numa_nodes_parsed __initdata;
-
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(__per_cpu_offset);
@@ -145,48 +140,6 @@ void numa_remove_cpu(unsigned int cpu)
 	cpumask_clear_cpu(cpu, &cpus_on_node[nid]);
 }
 
-static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
-				     struct numa_meminfo *mi)
-{
-	/* ignore zero length blks */
-	if (start == end)
-		return 0;
-
-	/* whine about and ignore invalid blks */
-	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-		pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-			   nid, start, end - 1);
-		return 0;
-	}
-
-	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-		pr_err("NUMA: too many memblk ranges\n");
-		return -EINVAL;
-	}
-
-	mi->blk[mi->nr_blks].start = PFN_ALIGN(start);
-	mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1);
-	mi->blk[mi->nr_blks].nid = nid;
-	mi->nr_blks++;
-	return 0;
-}
-
-/**
- * numa_add_memblk - Add one numa_memblk to numa_meminfo
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end: End address of the new memblk
- *
- * Add a new memblk to the default numa_meminfo.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
-	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
-}
-
 static void __init node_mem_init(unsigned int node)
 {
 	unsigned long start_pfn, end_pfn;
@@ -205,18 +158,6 @@ static void __init node_mem_init(unsigned int node)
 
 #ifdef CONFIG_ACPI_NUMA
 
-static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
-{
-	static unsigned long num_physpages;
-
-	num_physpages += (size >> PAGE_SHIFT);
-	pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
-		node, type, start, size);
-	pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-		start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages);
-	memblock_set_node(start, size, &memblock.memory, node);
-}
-
 /*
  * add_numamem_region
  *
@@ -228,28 +169,21 @@ static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type
  */
 static void __init add_numamem_region(u64 start, u64 end, u32 type)
 {
-	u32 i;
-	u64 ofs = start;
+	u32 node = pa_to_nid(start);
+	u64 size = end - start;
+	static unsigned long num_physpages;
 
 	if (start >= end) {
 		pr_debug("Invalid region: %016llx-%016llx\n", start, end);
 		return;
 	}
 
-	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		struct numa_memblk *mb = &numa_meminfo.blk[i];
-
-		if (ofs > mb->end)
-			continue;
-
-		if (end > mb->end) {
-			add_node_intersection(mb->nid, ofs, mb->end - ofs, type);
-			ofs = mb->end;
-		} else {
-			add_node_intersection(mb->nid, ofs, end - ofs, type);
-			break;
-		}
-	}
+	num_physpages += (size >> PAGE_SHIFT);
+	pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
+		node, type, start, size);
+	pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+		start >> PAGE_SHIFT, end >> PAGE_SHIFT, num_physpages);
+	memblock_set_node(start, size, &memblock.memory, node);
 }
 
 static void __init init_node_memblock(void)
@@ -291,24 +225,6 @@ static void __init init_node_memblock(void)
 	}
 }
 
-static void __init numa_default_distance(void)
-{
-	int row, col;
-
-	for (row = 0; row < MAX_NUMNODES; row++)
-		for (col = 0; col < MAX_NUMNODES; col++) {
-			if (col == row)
-				node_distances[row][col] = LOCAL_DISTANCE;
-			else
-				/* We assume that one node per package here!
-				 *
-				 * A SLIT should be used for multiple nodes
-				 * per package to override default setting.
-				 */
-				node_distances[row][col] = REMOTE_DISTANCE;
-	}
-}
-
 /*
  * fake_numa_init() - For Non-ACPI systems
  * Return: 0 on success, -errno on failure.
@@ -333,11 +249,11 @@ int __init init_numa_memory(void)
 	for (i = 0; i < NR_CPUS; i++)
 		set_cpuid_to_node(i, NUMA_NO_NODE);
 
-	numa_default_distance();
+	numa_reset_distance();
 	nodes_clear(numa_nodes_parsed);
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
-	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+	WARN_ON(memblock_clear_hotplug(0, PHYS_ADDR_MAX));
 
 	/* Parse SRAT and SLIT if provided by firmware. */
 	ret = acpi_disabled ? fake_numa_init() : acpi_numa_init();
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/paravirt.c linux-libre-6.16-gnu/arch/loongarch/kernel/paravirt.c
index e5a39bbad078..b1b51f920b23 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/paravirt.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/paravirt.c
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/irq_work.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/perf_event.c linux-libre-6.16-gnu/arch/loongarch/kernel/perf_event.c
index f86a4b838dd7..8ad098703488 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/perf_event.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/perf_event.c
@@ -479,8 +479,7 @@ static void handle_associated_event(struct cpu_hw_events *cpuc, int idx,
 	if (!loongarch_pmu_event_set_period(event, hwc, idx))
 		return;
 
-	if (perf_event_overflow(event, data, regs))
-		loongarch_pmu_disable_event(idx);
+	perf_event_overflow(event, data, regs);
 }
 
 static irqreturn_t pmu_handle_irq(int irq, void *dev)
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/process.c linux-libre-6.16-gnu/arch/loongarch/kernel/process.c
index 6e58f65455c7..3582f591bab2 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/process.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/process.c
@@ -13,6 +13,7 @@
 #include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/entry-common.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
@@ -34,6 +35,7 @@
 #include <linux/nmi.h>
 
 #include <asm/asm.h>
+#include <asm/asm-prototypes.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -47,6 +49,7 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/reg.h>
+#include <asm/switch_to.h>
 #include <asm/unwind.h>
 #include <asm/vdso.h>
 
@@ -63,8 +66,9 @@ EXPORT_SYMBOL(__stack_chk_guard);
 unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
 EXPORT_SYMBOL(boot_option_idle_override);
 
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
+asmlinkage void restore_and_ret(void);
+asmlinkage void ret_from_fork_asm(void);
+asmlinkage void ret_from_kernel_thread_asm(void);
 
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 {
@@ -138,6 +142,23 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
+asmlinkage void noinstr __no_stack_protector ret_from_fork(struct task_struct *prev,
+							   struct pt_regs *regs)
+{
+	schedule_tail(prev);
+	syscall_exit_to_user_mode(regs);
+}
+
+asmlinkage void noinstr __no_stack_protector ret_from_kernel_thread(struct task_struct *prev,
+								    struct pt_regs *regs,
+								    int (*fn)(void *),
+								    void *fn_arg)
+{
+	schedule_tail(prev);
+	fn(fn_arg);
+	syscall_exit_to_user_mode(regs);
+}
+
 /*
  * Copy architecture-specific thread state
  */
@@ -165,8 +186,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		p->thread.reg03 = childksp;
 		p->thread.reg23 = (unsigned long)args->fn;
 		p->thread.reg24 = (unsigned long)args->fn_arg;
-		p->thread.reg01 = (unsigned long)ret_from_kernel_thread;
-		p->thread.sched_ra = (unsigned long)ret_from_kernel_thread;
+		p->thread.reg01 = (unsigned long)ret_from_kernel_thread_asm;
+		p->thread.sched_ra = (unsigned long)ret_from_kernel_thread_asm;
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->csr_euen = p->thread.csr_euen;
 		childregs->csr_crmd = p->thread.csr_crmd;
@@ -182,8 +203,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childregs->regs[3] = usp;
 
 	p->thread.reg03 = (unsigned long) childregs;
-	p->thread.reg01 = (unsigned long) ret_from_fork;
-	p->thread.sched_ra = (unsigned long) ret_from_fork;
+	p->thread.reg01 = (unsigned long) ret_from_fork_asm;
+	p->thread.sched_ra = (unsigned long) ret_from_fork_asm;
 
 	/*
 	 * New tasks lose permission to use the fpu. This accelerates context
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/smp.c linux-libre-6.16-gnu/arch/loongarch/kernel/smp.c
index 4b24589c0b56..46036d98da75 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/smp.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/smp.c
@@ -46,6 +46,10 @@ EXPORT_SYMBOL(__cpu_logical_map);
 cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_sibling_map);
 
+/* Representing the last level cache shared map of each logical CPU */
+cpumask_t cpu_llc_shared_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_llc_shared_map);
+
 /* Representing the core map of multi-core chips of each logical CPU */
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
@@ -63,6 +67,9 @@ EXPORT_SYMBOL(cpu_foreign_map);
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
+/* representing cpus for which llc shared maps can be computed */
+static cpumask_t cpu_llc_shared_setup_map;
+
 /* representing cpus for which core maps can be computed */
 static cpumask_t cpu_core_setup_map;
 
@@ -102,6 +109,34 @@ static inline void set_cpu_core_map(int cpu)
 	}
 }
 
+static inline void set_cpu_llc_shared_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_llc_shared_setup_map);
+
+	for_each_cpu(i, &cpu_llc_shared_setup_map) {
+		if (cpu_to_node(cpu) == cpu_to_node(i)) {
+			cpumask_set_cpu(i, &cpu_llc_shared_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_llc_shared_map[i]);
+		}
+	}
+}
+
+static inline void clear_cpu_llc_shared_map(int cpu)
+{
+	int i;
+
+	for_each_cpu(i, &cpu_llc_shared_setup_map) {
+		if (cpu_to_node(cpu) == cpu_to_node(i)) {
+			cpumask_clear_cpu(i, &cpu_llc_shared_map[cpu]);
+			cpumask_clear_cpu(cpu, &cpu_llc_shared_map[i]);
+		}
+	}
+
+	cpumask_clear_cpu(cpu, &cpu_llc_shared_setup_map);
+}
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
@@ -406,6 +441,7 @@ int loongson_cpu_disable(void)
 #endif
 	set_cpu_online(cpu, false);
 	clear_cpu_sibling_map(cpu);
+	clear_cpu_llc_shared_map(cpu);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
 	irq_migrate_all_off_this_cpu();
@@ -572,6 +608,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;
 	loongson_prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
+	set_cpu_llc_shared_map(0);
 	set_cpu_core_map(0);
 	calculate_cpu_foreign_map();
 #ifndef CONFIG_HOTPLUG_CPU
@@ -613,6 +650,7 @@ asmlinkage void start_secondary(void)
 	loongson_init_secondary();
 
 	set_cpu_sibling_map(cpu);
+	set_cpu_llc_shared_map(cpu);
 	set_cpu_core_map(cpu);
 
 	notify_cpu_starting(cpu);
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/time.c linux-libre-6.16-gnu/arch/loongarch/kernel/time.c
index bc75a3a69fc8..367906b10f81 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/time.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/time.c
@@ -102,7 +102,7 @@ static int constant_timer_next_event(unsigned long delta, struct clock_event_dev
 	return 0;
 }
 
-static unsigned long __init get_loops_per_jiffy(void)
+static unsigned long get_loops_per_jiffy(void)
 {
 	unsigned long lpj = (unsigned long)const_clock_freq;
 
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/traps.c linux-libre-6.16-gnu/arch/loongarch/kernel/traps.c
index 47fc2de6d150..3d9be6ca7ec5 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/traps.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/traps.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/kexec.h>
 #include <linux/module.h>
+#include <linux/export.h>
 #include <linux/extable.h>
 #include <linux/mm.h>
 #include <linux/sched/mm.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_guess.c linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_guess.c
index 98379b7d4147..08d7951b2f60 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_guess.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_guess.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Loongson Technology Corporation Limited
  */
 #include <asm/unwind.h>
+#include <linux/export.h>
 
 unsigned long unwind_get_return_address(struct unwind_state *state)
 {
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_orc.c linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_orc.c
index d623935a7547..0005be49b056 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_orc.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_orc.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-#include <linux/objtool.h>
+#include <linux/export.h>
 #include <linux/module.h>
+#include <linux/objtool.h>
 #include <linux/sort.h>
 #include <asm/exception.h>
 #include <asm/orc_header.h>
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_prologue.c linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_prologue.c
index 929ae240280a..729e775bd40d 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/unwind_prologue.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/unwind_prologue.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Loongson Technology Corporation Limited
  */
 #include <linux/cpumask.h>
+#include <linux/export.h>
 #include <linux/ftrace.h>
 #include <linux/kallsyms.h>
 
diff --git linux-libre-6.15-gnu/arch/loongarch/kernel/vdso.c linux-libre-6.16-gnu/arch/loongarch/kernel/vdso.c
index 10cf1608c7b3..7b888d9085a0 100644
--- linux-libre-6.15-gnu/arch/loongarch/kernel/vdso.c
+++ linux-libre-6.16-gnu/arch/loongarch/kernel/vdso.c
@@ -105,7 +105,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 
 	vdso_addr = data_addr + VVAR_SIZE;
 	vma = _install_special_mapping(mm, vdso_addr, info->size,
-				       VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |
+				       VM_SEALED_SYSMAP,
 				       &info->code_mapping);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
diff --git linux-libre-6.15-gnu/arch/loongarch/kvm/exit.c linux-libre-6.16-gnu/arch/loongarch/kvm/exit.c
index ea321403644a..fa52251b3bf1 100644
--- linux-libre-6.15-gnu/arch/loongarch/kvm/exit.c
+++ linux-libre-6.16-gnu/arch/loongarch/kvm/exit.c
@@ -341,7 +341,7 @@ static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
  * 2) Execute CACOP/IDLE instructions;
  * 3) Access to unimplemented CSRs/IOCSRs.
  */
-static int kvm_handle_gspr(struct kvm_vcpu *vcpu)
+static int kvm_handle_gspr(struct kvm_vcpu *vcpu, int ecode)
 {
 	int ret = RESUME_GUEST;
 	enum emulation_result er = EMULATE_DONE;
@@ -661,7 +661,7 @@ int kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst)
 	return ret;
 }
 
-static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
+static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write, int ecode)
 {
 	int ret;
 	larch_inst inst;
@@ -675,7 +675,7 @@ static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
 		return RESUME_GUEST;
 	}
 
-	ret = kvm_handle_mm_fault(vcpu, badv, write);
+	ret = kvm_handle_mm_fault(vcpu, badv, write, ecode);
 	if (ret) {
 		/* Treat as MMIO */
 		inst.word = vcpu->arch.badi;
@@ -705,14 +705,14 @@ static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
 	return ret;
 }
 
-static int kvm_handle_read_fault(struct kvm_vcpu *vcpu)
+static int kvm_handle_read_fault(struct kvm_vcpu *vcpu, int ecode)
 {
-	return kvm_handle_rdwr_fault(vcpu, false);
+	return kvm_handle_rdwr_fault(vcpu, false, ecode);
 }
 
-static int kvm_handle_write_fault(struct kvm_vcpu *vcpu)
+static int kvm_handle_write_fault(struct kvm_vcpu *vcpu, int ecode)
 {
-	return kvm_handle_rdwr_fault(vcpu, true);
+	return kvm_handle_rdwr_fault(vcpu, true, ecode);
 }
 
 int kvm_complete_user_service(struct kvm_vcpu *vcpu, struct kvm_run *run)
@@ -726,11 +726,12 @@ int kvm_complete_user_service(struct kvm_vcpu *vcpu, struct kvm_run *run)
 /**
  * kvm_handle_fpu_disabled() - Guest used fpu however it is disabled at host
  * @vcpu:	Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use fpu which hasn't been allowed
  * by the root context.
  */
-static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	struct kvm_run *run = vcpu->run;
 
@@ -783,11 +784,12 @@ static long kvm_save_notify(struct kvm_vcpu *vcpu)
 /*
  * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root.
  * @vcpu:      Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use LSX when it is disabled in the root
  * context.
  */
-static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lsx(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -798,11 +800,12 @@ static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
 /*
  * kvm_handle_lasx_disabled() - Guest used LASX while disabled in root.
  * @vcpu:	Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use LASX when it is disabled in the root
  * context.
  */
-static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lasx(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -810,7 +813,7 @@ static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
 	return RESUME_GUEST;
 }
 
-static int kvm_handle_lbt_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lbt_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lbt(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -872,7 +875,7 @@ static void kvm_handle_service(struct kvm_vcpu *vcpu)
 	kvm_write_reg(vcpu, LOONGARCH_GPR_A0, ret);
 }
 
-static int kvm_handle_hypercall(struct kvm_vcpu *vcpu)
+static int kvm_handle_hypercall(struct kvm_vcpu *vcpu, int ecode)
 {
 	int ret;
 	larch_inst inst;
@@ -932,16 +935,14 @@ static int kvm_handle_hypercall(struct kvm_vcpu *vcpu)
 /*
  * LoongArch KVM callback handling for unimplemented guest exiting
  */
-static int kvm_fault_ni(struct kvm_vcpu *vcpu)
+static int kvm_fault_ni(struct kvm_vcpu *vcpu, int ecode)
 {
-	unsigned int ecode, inst;
-	unsigned long estat, badv;
+	unsigned int inst;
+	unsigned long badv;
 
 	/* Fetch the instruction */
 	inst = vcpu->arch.badi;
 	badv = vcpu->arch.badv;
-	estat = vcpu->arch.host_estat;
-	ecode = (estat & CSR_ESTAT_EXC) >> CSR_ESTAT_EXC_SHIFT;
 	kvm_err("ECode: %d PC=%#lx Inst=0x%08x BadVaddr=%#lx ESTAT=%#lx\n",
 			ecode, vcpu->arch.pc, inst, badv, read_gcsr_estat());
 	kvm_arch_vcpu_dump_regs(vcpu);
@@ -966,5 +967,5 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = {
 
 int kvm_handle_fault(struct kvm_vcpu *vcpu, int fault)
 {
-	return kvm_fault_tables[fault](vcpu);
+	return kvm_fault_tables[fault](vcpu, fault);
 }
diff --git linux-libre-6.15-gnu/arch/loongarch/kvm/intc/eiointc.c linux-libre-6.16-gnu/arch/loongarch/kvm/intc/eiointc.c
index f39929d7bf8a..a75f865d6fb9 100644
--- linux-libre-6.15-gnu/arch/loongarch/kvm/intc/eiointc.c
+++ linux-libre-6.16-gnu/arch/loongarch/kvm/intc/eiointc.c
@@ -9,7 +9,8 @@
 
 static void eiointc_set_sw_coreisr(struct loongarch_eiointc *s)
 {
-	int ipnum, cpu, irq_index, irq_mask, irq;
+	int ipnum, cpu, cpuid, irq_index, irq_mask, irq;
+	struct kvm_vcpu *vcpu;
 
 	for (irq = 0; irq < EIOINTC_IRQS; irq++) {
 		ipnum = s->ipmap.reg_u8[irq / 32];
@@ -20,7 +21,12 @@ static void eiointc_set_sw_coreisr(struct loongarch_eiointc *s)
 		irq_index = irq / 32;
 		irq_mask = BIT(irq & 0x1f);
 
-		cpu = s->coremap.reg_u8[irq];
+		cpuid = s->coremap.reg_u8[irq];
+		vcpu = kvm_get_vcpu_by_cpuid(s->kvm, cpuid);
+		if (!vcpu)
+			continue;
+
+		cpu = vcpu->vcpu_id;
 		if (!!(s->coreisr.reg_u32[cpu][irq_index] & irq_mask))
 			set_bit(irq, s->sw_coreisr[cpu][ipnum]);
 		else
@@ -66,20 +72,25 @@ static void eiointc_update_irq(struct loongarch_eiointc *s, int irq, int level)
 }
 
 static inline void eiointc_update_sw_coremap(struct loongarch_eiointc *s,
-					int irq, void *pvalue, u32 len, bool notify)
+					int irq, u64 val, u32 len, bool notify)
 {
-	int i, cpu;
-	u64 val = *(u64 *)pvalue;
+	int i, cpu, cpuid;
+	struct kvm_vcpu *vcpu;
 
 	for (i = 0; i < len; i++) {
-		cpu = val & 0xff;
+		cpuid = val & 0xff;
 		val = val >> 8;
 
 		if (!(s->status & BIT(EIOINTC_ENABLE_CPU_ENCODE))) {
-			cpu = ffs(cpu) - 1;
-			cpu = (cpu >= 4) ? 0 : cpu;
+			cpuid = ffs(cpuid) - 1;
+			cpuid = (cpuid >= 4) ? 0 : cpuid;
 		}
 
+		vcpu = kvm_get_vcpu_by_cpuid(s->kvm, cpuid);
+		if (!vcpu)
+			continue;
+
+		cpu = vcpu->vcpu_id;
 		if (s->sw_coremap[irq + i] == cpu)
 			continue;
 
@@ -305,6 +316,11 @@ static int kvm_eiointc_read(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: eiointc not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	vcpu->kvm->stat.eiointc_read_exits++;
 	spin_lock_irqsave(&eiointc->lock, flags);
 	switch (len) {
@@ -398,7 +414,7 @@ static int loongarch_eiointc_writeb(struct kvm_vcpu *vcpu,
 		irq = offset - EIOINTC_COREMAP_START;
 		index = irq;
 		s->coremap.reg_u8[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
+		eiointc_update_sw_coremap(s, irq, data, sizeof(data), true);
 		break;
 	default:
 		ret = -EINVAL;
@@ -436,17 +452,16 @@ static int loongarch_eiointc_writew(struct kvm_vcpu *vcpu,
 		break;
 	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
 		index = (offset - EIOINTC_ENABLE_START) >> 1;
-		old_data = s->enable.reg_u32[index];
+		old_data = s->enable.reg_u16[index];
 		s->enable.reg_u16[index] = data;
 		/*
 		 * 1: enable irq.
 		 * update irq when isr is set.
 		 */
 		data = s->enable.reg_u16[index] & ~old_data & s->isr.reg_u16[index];
-		index = index << 1;
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
+			eiointc_enable_irq(vcpu, s, index * 2 + i, mask, 1);
 		}
 		/*
 		 * 0: disable irq.
@@ -455,7 +470,7 @@ static int loongarch_eiointc_writew(struct kvm_vcpu *vcpu,
 		data = ~s->enable.reg_u16[index] & old_data & s->isr.reg_u16[index];
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
+			eiointc_enable_irq(vcpu, s, index * 2 + i, mask, 0);
 		}
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
@@ -484,7 +499,7 @@ static int loongarch_eiointc_writew(struct kvm_vcpu *vcpu,
 		irq = offset - EIOINTC_COREMAP_START;
 		index = irq >> 1;
 		s->coremap.reg_u16[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
+		eiointc_update_sw_coremap(s, irq, data, sizeof(data), true);
 		break;
 	default:
 		ret = -EINVAL;
@@ -529,10 +544,9 @@ static int loongarch_eiointc_writel(struct kvm_vcpu *vcpu,
 		 * update irq when isr is set.
 		 */
 		data = s->enable.reg_u32[index] & ~old_data & s->isr.reg_u32[index];
-		index = index << 2;
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
+			eiointc_enable_irq(vcpu, s, index * 4 + i, mask, 1);
 		}
 		/*
 		 * 0: disable irq.
@@ -541,7 +555,7 @@ static int loongarch_eiointc_writel(struct kvm_vcpu *vcpu,
 		data = ~s->enable.reg_u32[index] & old_data & s->isr.reg_u32[index];
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
+			eiointc_enable_irq(vcpu, s, index * 4 + i, mask, 0);
 		}
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
@@ -570,7 +584,7 @@ static int loongarch_eiointc_writel(struct kvm_vcpu *vcpu,
 		irq = offset - EIOINTC_COREMAP_START;
 		index = irq >> 2;
 		s->coremap.reg_u32[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
+		eiointc_update_sw_coremap(s, irq, data, sizeof(data), true);
 		break;
 	default:
 		ret = -EINVAL;
@@ -615,10 +629,9 @@ static int loongarch_eiointc_writeq(struct kvm_vcpu *vcpu,
 		 * update irq when isr is set.
 		 */
 		data = s->enable.reg_u64[index] & ~old_data & s->isr.reg_u64[index];
-		index = index << 3;
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
+			eiointc_enable_irq(vcpu, s, index * 8 + i, mask, 1);
 		}
 		/*
 		 * 0: disable irq.
@@ -627,7 +640,7 @@ static int loongarch_eiointc_writeq(struct kvm_vcpu *vcpu,
 		data = ~s->enable.reg_u64[index] & old_data & s->isr.reg_u64[index];
 		for (i = 0; i < sizeof(data); i++) {
 			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
+			eiointc_enable_irq(vcpu, s, index * 8 + i, mask, 0);
 		}
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
@@ -656,7 +669,7 @@ static int loongarch_eiointc_writeq(struct kvm_vcpu *vcpu,
 		irq = offset - EIOINTC_COREMAP_START;
 		index = irq >> 3;
 		s->coremap.reg_u64[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
+		eiointc_update_sw_coremap(s, irq, data, sizeof(data), true);
 		break;
 	default:
 		ret = -EINVAL;
@@ -679,6 +692,11 @@ static int kvm_eiointc_write(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: eiointc not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	vcpu->kvm->stat.eiointc_write_exits++;
 	spin_lock_irqsave(&eiointc->lock, flags);
 	switch (len) {
@@ -787,7 +805,7 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 	int ret = 0;
 	unsigned long flags;
 	unsigned long type = (unsigned long)attr->attr;
-	u32 i, start_irq;
+	u32 i, start_irq, val;
 	void __user *data;
 	struct loongarch_eiointc *s = dev->kvm->arch.eiointc;
 
@@ -795,8 +813,14 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 	spin_lock_irqsave(&s->lock, flags);
 	switch (type) {
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU:
-		if (copy_from_user(&s->num_cpu, data, 4))
+		if (copy_from_user(&val, data, 4))
 			ret = -EFAULT;
+		else {
+			if (val >= EIOINTC_ROUTE_MAX_VCPUS)
+				ret = -EINVAL;
+			else
+				s->num_cpu = val;
+		}
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_FEATURE:
 		if (copy_from_user(&s->features, data, 4))
@@ -809,7 +833,7 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 		for (i = 0; i < (EIOINTC_IRQS / 4); i++) {
 			start_irq = i * 4;
 			eiointc_update_sw_coremap(s, start_irq,
-					(void *)&s->coremap.reg_u32[i], sizeof(u32), false);
+					s->coremap.reg_u32[i], sizeof(u32), false);
 		}
 		break;
 	default:
@@ -824,7 +848,7 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 					struct kvm_device_attr *attr,
 					bool is_write)
 {
-	int addr, cpuid, offset, ret = 0;
+	int addr, cpu, offset, ret = 0;
 	unsigned long flags;
 	void *p = NULL;
 	void __user *data;
@@ -832,7 +856,7 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 
 	s = dev->kvm->arch.eiointc;
 	addr = attr->attr;
-	cpuid = addr >> 16;
+	cpu = addr >> 16;
 	addr &= 0xffff;
 	data = (void __user *)attr->addr;
 	switch (addr) {
@@ -857,8 +881,11 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 		p = &s->isr.reg_u32[offset];
 		break;
 	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
+		if (cpu >= s->num_cpu)
+			return -EINVAL;
+
 		offset = (addr - EIOINTC_COREISR_START) / 4;
-		p = &s->coreisr.reg_u32[cpuid][offset];
+		p = &s->coreisr.reg_u32[cpu][offset];
 		break;
 	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
 		offset = (addr - EIOINTC_COREMAP_START) / 4;
@@ -899,9 +926,15 @@ static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 	data = (void __user *)attr->addr;
 	switch (addr) {
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_NUM_CPU:
+		if (is_write)
+			return ret;
+
 		p = &s->num_cpu;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_FEATURE:
+		if (is_write)
+			return ret;
+
 		p = &s->features;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_STATE:
diff --git linux-libre-6.15-gnu/arch/loongarch/kvm/mmu.c linux-libre-6.16-gnu/arch/loongarch/kvm/mmu.c
index 4d203294767c..ed956c5cf2cc 100644
--- linux-libre-6.15-gnu/arch/loongarch/kvm/mmu.c
+++ linux-libre-6.16-gnu/arch/loongarch/kvm/mmu.c
@@ -912,7 +912,7 @@ out:
 	return err;
 }
 
-int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write)
+int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write, int ecode)
 {
 	int ret;
 
@@ -921,8 +921,17 @@ int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write)
 		return ret;
 
 	/* Invalidate this entry in the TLB */
-	vcpu->arch.flush_gpa = gpa;
-	kvm_make_request(KVM_REQ_TLB_FLUSH_GPA, vcpu);
+	if (!cpu_has_ptw || (ecode == EXCCODE_TLBM)) {
+		/*
+		 * With HW PTW, invalid TLB is not added when page fault. But
+		 * for EXCCODE_TLBM exception, stale TLB may exist because of
+		 * the last read access.
+		 *
+		 * With SW PTW, invalid TLB is added in TLB refill exception.
+		 */
+		vcpu->arch.flush_gpa = gpa;
+		kvm_make_request(KVM_REQ_TLB_FLUSH_GPA, vcpu);
+	}
 
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/loongarch/lib/crc32-loongarch.c linux-libre-6.16-gnu/arch/loongarch/lib/crc32-loongarch.c
index c44ee4f32557..db22c2ec55e2 100644
--- linux-libre-6.15-gnu/arch/loongarch/lib/crc32-loongarch.c
+++ linux-libre-6.16-gnu/arch/loongarch/lib/crc32-loongarch.c
@@ -11,6 +11,7 @@
 
 #include <asm/cpu-features.h>
 #include <linux/crc32.h>
+#include <linux/export.h>
 #include <linux/module.h>
 #include <linux/unaligned.h>
 
@@ -26,7 +27,7 @@ do {							\
 #define CRC32(crc, value, size)		_CRC32(crc, value, size, crc)
 #define CRC32C(crc, value, size)	_CRC32(crc, value, size, crcc)
 
-static DEFINE_STATIC_KEY_FALSE(have_crc32);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_crc32);
 
 u32 crc32_le_arch(u32 crc, const u8 *p, size_t len)
 {
@@ -114,7 +115,7 @@ static int __init crc32_loongarch_init(void)
 		static_branch_enable(&have_crc32);
 	return 0;
 }
-arch_initcall(crc32_loongarch_init);
+subsys_initcall(crc32_loongarch_init);
 
 static void __exit crc32_loongarch_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/loongarch/lib/csum.c linux-libre-6.16-gnu/arch/loongarch/lib/csum.c
index df309ae4045d..bcc9d01d8c41 100644
--- linux-libre-6.15-gnu/arch/loongarch/lib/csum.c
+++ linux-libre-6.16-gnu/arch/loongarch/lib/csum.c
@@ -2,6 +2,7 @@
 // Copyright (C) 2019-2020 Arm Ltd.
 
 #include <linux/compiler.h>
+#include <linux/export.h>
 #include <linux/kasan-checks.h>
 #include <linux/kernel.h>
 
diff --git linux-libre-6.15-gnu/arch/loongarch/mm/hugetlbpage.c linux-libre-6.16-gnu/arch/loongarch/mm/hugetlbpage.c
index cea84d7f2b91..02dad4624fe3 100644
--- linux-libre-6.15-gnu/arch/loongarch/mm/hugetlbpage.c
+++ linux-libre-6.16-gnu/arch/loongarch/mm/hugetlbpage.c
@@ -47,7 +47,8 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr,
 				pmd = pmd_offset(pud, addr);
 		}
 	}
-	return pmd_none(pmdp_get(pmd)) ? NULL : (pte_t *) pmd;
+
+	return (!pmd || pmd_none(pmdp_get(pmd))) ? NULL : (pte_t *) pmd;
 }
 
 uint64_t pmd_to_entrylo(unsigned long pmd_val)
diff --git linux-libre-6.15-gnu/arch/loongarch/mm/init.c linux-libre-6.16-gnu/arch/loongarch/mm/init.c
index 06f11d9e4ec1..c3e4586a7975 100644
--- linux-libre-6.15-gnu/arch/loongarch/mm/init.c
+++ linux-libre-6.16-gnu/arch/loongarch/mm/init.c
@@ -106,14 +106,6 @@ void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 		page += vmem_altmap_offset(altmap);
 	__remove_pages(start_pfn, nr_pages, altmap);
 }
-
-#ifdef CONFIG_NUMA
-int memory_add_physaddr_to_nid(u64 start)
-{
-	return pa_to_nid(start);
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
 #endif
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
diff --git linux-libre-6.15-gnu/arch/loongarch/mm/ioremap.c linux-libre-6.16-gnu/arch/loongarch/mm/ioremap.c
index 70ca73019811..df949a3d0f34 100644
--- linux-libre-6.15-gnu/arch/loongarch/mm/ioremap.c
+++ linux-libre-6.16-gnu/arch/loongarch/mm/ioremap.c
@@ -16,12 +16,12 @@ void __init early_iounmap(void __iomem *addr, unsigned long size)
 
 }
 
-void *early_memremap_ro(resource_size_t phys_addr, unsigned long size)
+void * __init early_memremap_ro(resource_size_t phys_addr, unsigned long size)
 {
 	return early_memremap(phys_addr, size);
 }
 
-void *early_memremap_prot(resource_size_t phys_addr, unsigned long size,
+void * __init early_memremap_prot(resource_size_t phys_addr, unsigned long size,
 		    unsigned long prot_val)
 {
 	return early_memremap(phys_addr, size);
diff --git linux-libre-6.15-gnu/arch/loongarch/mm/pgtable.c linux-libre-6.16-gnu/arch/loongarch/mm/pgtable.c
index 22a94bb3e6e8..352d9b2e02ab 100644
--- linux-libre-6.15-gnu/arch/loongarch/mm/pgtable.c
+++ linux-libre-6.16-gnu/arch/loongarch/mm/pgtable.c
@@ -135,15 +135,6 @@ void kernel_pte_init(void *addr)
 	} while (p != end);
 }
 
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git linux-libre-6.15-gnu/arch/loongarch/pci/acpi.c linux-libre-6.16-gnu/arch/loongarch/pci/acpi.c
index 1da4dc46df43..50c9016641a4 100644
--- linux-libre-6.15-gnu/arch/loongarch/pci/acpi.c
+++ linux-libre-6.16-gnu/arch/loongarch/pci/acpi.c
@@ -194,6 +194,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
 	struct pci_bus *bus;
 	struct pci_root_info *info;
+	struct pci_host_bridge *host;
 	struct acpi_pci_root_ops *root_ops;
 	int domain = root->segment;
 	int busnum = root->secondary.start;
@@ -237,8 +238,17 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 			return NULL;
 		}
 
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
+		/* If we must preserve the resource configuration, claim now */
+		host = pci_find_host_bridge(bus);
+		if (host->preserve_config)
+			pci_bus_claim_resources(bus);
+
+		/*
+		 * Assign whatever was left unassigned. If we didn't claim above,
+		 * this will reassign everything.
+		 */
+		pci_assign_unassigned_root_bus_resources(bus);
+
 		list_for_each_entry(child, &bus->children, node)
 			pcie_bus_configure_settings(child);
 	}
diff --git linux-libre-6.15-gnu/arch/loongarch/pci/pci.c linux-libre-6.16-gnu/arch/loongarch/pci/pci.c
index 2726639150bc..5bc9627a6cf9 100644
--- linux-libre-6.15-gnu/arch/loongarch/pci/pci.c
+++ linux-libre-6.16-gnu/arch/loongarch/pci/pci.c
@@ -3,7 +3,6 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/kernel.h>
-#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/types.h>
diff --git linux-libre-6.15-gnu/arch/m68k/coldfire/gpio.c linux-libre-6.16-gnu/arch/m68k/coldfire/gpio.c
index ca26de257871..30e5a4ed799d 100644
--- linux-libre-6.15-gnu/arch/m68k/coldfire/gpio.c
+++ linux-libre-6.16-gnu/arch/m68k/coldfire/gpio.c
@@ -123,10 +123,12 @@ static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	return __mcfgpio_direction_output(offset, value);
 }
 
-static void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset,
-			      int value)
+static int mcfgpio_set_value(struct gpio_chip *chip, unsigned int offset,
+			     int value)
 {
 	__mcfgpio_set_value(offset, value);
+
+	return 0;
 }
 
 static int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
@@ -158,7 +160,7 @@ static struct gpio_chip mcfgpio_chip = {
 	.direction_input	= mcfgpio_direction_input,
 	.direction_output	= mcfgpio_direction_output,
 	.get			= mcfgpio_get_value,
-	.set			= mcfgpio_set_value,
+	.set_rv			= mcfgpio_set_value,
 	.to_irq			= mcfgpio_to_irq,
 	.base			= 0,
 	.ngpio			= MCFGPIO_PIN_MAX,
diff --git linux-libre-6.15-gnu/arch/m68k/coldfire/m5272.c linux-libre-6.16-gnu/arch/m68k/coldfire/m5272.c
index 734dab657fe3..5b70dfdab368 100644
--- linux-libre-6.15-gnu/arch/m68k/coldfire/m5272.c
+++ linux-libre-6.16-gnu/arch/m68k/coldfire/m5272.c
@@ -119,7 +119,7 @@ static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
-	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
+	fixed_phy_add(0, &nettel_fixed_phy_status);
 	clkdev_add_table(m5272_clk_lookup, ARRAY_SIZE(m5272_clk_lookup));
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/m68k/configs/amcore_defconfig linux-libre-6.16-gnu/arch/m68k/configs/amcore_defconfig
index 110279a64aa4..60767811e34a 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/amcore_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/amcore_defconfig
@@ -2,7 +2,6 @@ CONFIG_LOCALVERSION="amcore-002"
 CONFIG_DEFAULT_HOSTNAME="amcore"
 CONFIG_SYSVIPC=y
 # CONFIG_FHANDLE is not set
-# CONFIG_USELIB is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_AIO is not set
diff --git linux-libre-6.15-gnu/arch/m68k/configs/amiga_defconfig linux-libre-6.16-gnu/arch/m68k/configs/amiga_defconfig
index 31ecb8b7b9f1..d05690289e33 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/amiga_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/amiga_defconfig
@@ -267,8 +267,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -551,7 +549,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -602,7 +600,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -621,8 +618,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -632,7 +627,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/apollo_defconfig linux-libre-6.16-gnu/arch/m68k/configs/apollo_defconfig
index 1f57514624d5..a1747fbe23fb 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/apollo_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/apollo_defconfig
@@ -263,8 +263,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -508,7 +506,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -559,7 +557,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -578,8 +575,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -589,7 +584,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/atari_defconfig linux-libre-6.16-gnu/arch/m68k/configs/atari_defconfig
index 02db7a48e57e..74293551f66b 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/atari_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/atari_defconfig
@@ -270,8 +270,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -528,7 +526,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -579,7 +577,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -598,8 +595,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -609,7 +604,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/bvme6000_defconfig linux-libre-6.16-gnu/arch/m68k/configs/bvme6000_defconfig
index f0e673cb17eb..419b13ae950a 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/bvme6000_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/bvme6000_defconfig
@@ -260,8 +260,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -500,7 +498,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -551,7 +549,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -570,8 +567,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -581,7 +576,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/hp300_defconfig linux-libre-6.16-gnu/arch/m68k/configs/hp300_defconfig
index e8ca5a50b86d..4c81d756587c 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/hp300_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/hp300_defconfig
@@ -262,8 +262,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -510,7 +508,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -561,7 +559,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -580,8 +577,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -591,7 +586,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/mac_defconfig linux-libre-6.16-gnu/arch/m68k/configs/mac_defconfig
index b3a270441bb1..daa01d7fb462 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/mac_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/mac_defconfig
@@ -261,8 +261,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -527,7 +525,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -578,7 +576,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -597,8 +594,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -608,7 +603,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/multi_defconfig linux-libre-6.16-gnu/arch/m68k/configs/multi_defconfig
index d215dba006ce..641ca22eb3b2 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/multi_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/multi_defconfig
@@ -281,8 +281,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -614,7 +612,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -665,7 +663,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -684,8 +681,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -695,7 +690,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/mvme147_defconfig linux-libre-6.16-gnu/arch/m68k/configs/mvme147_defconfig
index a888ed93ff82..f98ffa7a1640 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/mvme147_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/mvme147_defconfig
@@ -259,8 +259,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -500,7 +498,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -551,7 +549,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -570,8 +567,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -581,7 +576,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/mvme16x_defconfig linux-libre-6.16-gnu/arch/m68k/configs/mvme16x_defconfig
index b481782375f6..2bfc3f4b48f9 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/mvme16x_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/mvme16x_defconfig
@@ -260,8 +260,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -501,7 +499,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -552,7 +550,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -571,8 +568,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -582,7 +577,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/q40_defconfig linux-libre-6.16-gnu/arch/m68k/configs/q40_defconfig
index 6eba743d8eb5..2bd46cbcca2a 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/q40_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/q40_defconfig
@@ -261,8 +261,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -517,7 +515,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -568,7 +566,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -587,8 +584,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -598,7 +593,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/sun3_defconfig linux-libre-6.16-gnu/arch/m68k/configs/sun3_defconfig
index 9bdbb418ffa8..dc7fc94fc669 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/sun3_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/sun3_defconfig
@@ -256,8 +256,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -498,7 +496,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -549,7 +547,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -567,8 +564,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -578,7 +573,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/configs/sun3x_defconfig linux-libre-6.16-gnu/arch/m68k/configs/sun3x_defconfig
index e1cf20fa5343..b026a54867f5 100644
--- linux-libre-6.15-gnu/arch/m68k/configs/sun3x_defconfig
+++ linux-libre-6.16-gnu/arch/m68k/configs/sun3x_defconfig
@@ -257,8 +257,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_SCTP_COOKIE_HMAC_SHA1=y
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -498,7 +496,7 @@ CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
@@ -549,7 +547,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PRIME_NUMBERS=m
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -568,8 +565,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -579,7 +574,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/mcf_pgalloc.h linux-libre-6.16-gnu/arch/m68k/include/asm/mcf_pgalloc.h
index 4c648b51e7fd..fc5454d37da3 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/mcf_pgalloc.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/mcf_pgalloc.h
@@ -7,7 +7,7 @@
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
-	pagetable_free(virt_to_ptdesc(pte));
+	pagetable_dtor_free(virt_to_ptdesc(pte));
 }
 
 extern const char bad_pmd_string[];
@@ -19,6 +19,10 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 
 	if (!ptdesc)
 		return NULL;
+	if (!pagetable_pte_ctor(mm, ptdesc)) {
+		pagetable_free(ptdesc);
+		return NULL;
+	}
 
 	return ptdesc_address(ptdesc);
 }
@@ -48,7 +52,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm)
 
 	if (!ptdesc)
 		return NULL;
-	if (!pagetable_pte_ctor(ptdesc)) {
+	if (!pagetable_pte_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/mcf_pgtable.h linux-libre-6.16-gnu/arch/m68k/include/asm/mcf_pgtable.h
index 48f87a8a8832..d79fef609194 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/mcf_pgtable.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/mcf_pgtable.h
@@ -96,12 +96,6 @@
 
 #define pmd_pgtable(pmd) pfn_to_virt(pmd_val(pmd) >> PAGE_SHIFT)
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -274,7 +268,7 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	(__pte((x).val))
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/motorola_pgalloc.h linux-libre-6.16-gnu/arch/m68k/include/asm/motorola_pgalloc.h
index 5abe7da8ac5a..1091fb0affbe 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/motorola_pgalloc.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/motorola_pgalloc.h
@@ -15,7 +15,7 @@ enum m68k_table_types {
 };
 
 extern void init_pointer_table(void *table, int type);
-extern void *get_pointer_table(int type);
+extern void *get_pointer_table(struct mm_struct *mm, int type);
 extern int free_pointer_table(void *table, int type);
 
 /*
@@ -26,7 +26,7 @@ extern int free_pointer_table(void *table, int type);
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PTE);
+	return get_pointer_table(mm, TABLE_PTE);
 }
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -36,7 +36,7 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 
 static inline pgtable_t pte_alloc_one(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PTE);
+	return get_pointer_table(mm, TABLE_PTE);
 }
 
 static inline void pte_free(struct mm_struct *mm, pgtable_t pgtable)
@@ -53,7 +53,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pgtable,
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	return get_pointer_table(TABLE_PMD);
+	return get_pointer_table(mm, TABLE_PMD);
 }
 
 static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
@@ -75,7 +75,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PGD);
+	return get_pointer_table(mm, TABLE_PGD);
 }
 
 
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/motorola_pgtable.h linux-libre-6.16-gnu/arch/m68k/include/asm/motorola_pgtable.h
index 9866c7acdabe..14fee64d3e60 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/motorola_pgtable.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/motorola_pgtable.h
@@ -81,12 +81,6 @@ extern unsigned long mm_cachebits;
 
 #define pmd_pgtable(pmd) ((pgtable_t)pmd_page_vaddr(pmd))
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -191,7 +185,7 @@ extern pgd_t kernel_pg_dir[128];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/sun3_pgtable.h linux-libre-6.16-gnu/arch/m68k/include/asm/sun3_pgtable.h
index 30081aee8164..858cbe936f5b 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/sun3_pgtable.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/sun3_pgtable.h
@@ -76,12 +76,6 @@
 
 #ifndef __ASSEMBLY__
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -175,7 +169,7 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/m68k/include/asm/syscall.h linux-libre-6.16-gnu/arch/m68k/include/asm/syscall.h
index d1453e850cdd..bf84b160c2eb 100644
--- linux-libre-6.15-gnu/arch/m68k/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/m68k/include/asm/syscall.h
@@ -14,6 +14,13 @@ static inline int syscall_get_nr(struct task_struct *task,
 	return regs->orig_d0;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->orig_d0 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
diff --git linux-libre-6.15-gnu/arch/m68k/kernel/Makefile linux-libre-6.16-gnu/arch/m68k/kernel/Makefile
index 6c732ed3998b..57c1b3e8d60e 100644
--- linux-libre-6.15-gnu/arch/m68k/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/m68k/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y			+= vmlinux.lds
+always-$(KBUILD_BUILTIN)	+= vmlinux.lds
 
 obj-$(CONFIG_MMU_MOTOROLA)	:= head.o
 obj-$(CONFIG_SUN3)		:= sun3-head.o
diff --git linux-libre-6.15-gnu/arch/m68k/kernel/setup_mm.c linux-libre-6.16-gnu/arch/m68k/kernel/setup_mm.c
index 0fba32552836..c7e8de0d34bb 100644
--- linux-libre-6.15-gnu/arch/m68k/kernel/setup_mm.c
+++ linux-libre-6.16-gnu/arch/m68k/kernel/setup_mm.c
@@ -484,7 +484,7 @@ static int hardware_proc_show(struct seq_file *m, void *v)
 	if (mach_get_model)
 		mach_get_model(model);
 	else
-		strcpy(model, "Unknown m68k");
+		strscpy(model, "Unknown m68k");
 
 	seq_printf(m, "Model:\t\t%s\n", model);
 	for (mem = 0, i = 0; i < m68k_num_memory; i++)
diff --git linux-libre-6.15-gnu/arch/m68k/kernel/setup_no.c linux-libre-6.16-gnu/arch/m68k/kernel/setup_no.c
index f9872098f5ca..f724875b15cc 100644
--- linux-libre-6.15-gnu/arch/m68k/kernel/setup_no.c
+++ linux-libre-6.16-gnu/arch/m68k/kernel/setup_no.c
@@ -145,8 +145,7 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
+	strscpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 
 	/*
 	 * Give all the memory to the bootmap allocator, tell it to put the
diff --git linux-libre-6.15-gnu/arch/m68k/kernel/uboot.c linux-libre-6.16-gnu/arch/m68k/kernel/uboot.c
index 5e52ea150d5c..fa7c279ead5d 100644
--- linux-libre-6.15-gnu/arch/m68k/kernel/uboot.c
+++ linux-libre-6.16-gnu/arch/m68k/kernel/uboot.c
@@ -73,7 +73,7 @@ static void __init parse_uboot_commandline(char *commandp, int size)
 	uboot_cmd_end = sp[5];
 
 	if (uboot_cmd_start && uboot_cmd_end)
-		strncpy(commandp, (const char *)uboot_cmd_start, size);
+		strscpy(commandp, (const char *)uboot_cmd_start, size);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	uboot_initrd_start = sp[2];
diff --git linux-libre-6.15-gnu/arch/m68k/mac/config.c linux-libre-6.16-gnu/arch/m68k/mac/config.c
index e324410ef239..d26c7f4f8c36 100644
--- linux-libre-6.15-gnu/arch/m68k/mac/config.c
+++ linux-libre-6.16-gnu/arch/m68k/mac/config.c
@@ -793,7 +793,7 @@ static void __init mac_identify(void)
 	}
 
 	macintosh_config = mac_data_table;
-	for (m = macintosh_config; m->ident != -1; m++) {
+	for (m = &mac_data_table[1]; m->ident != -1; m++) {
 		if (m->ident == model) {
 			macintosh_config = m;
 			break;
diff --git linux-libre-6.15-gnu/arch/m68k/mm/motorola.c linux-libre-6.16-gnu/arch/m68k/mm/motorola.c
index 73651e093c4d..745bd575dcfa 100644
--- linux-libre-6.15-gnu/arch/m68k/mm/motorola.c
+++ linux-libre-6.16-gnu/arch/m68k/mm/motorola.c
@@ -105,7 +105,8 @@ static struct list_head ptable_list[3] = {
 
 #define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page((void *)(page))->lru))
 #define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
-#define PD_MARKBITS(dp) (*(unsigned int *)&PD_PAGE(dp)->index)
+#define PD_PTDESC(ptable) (list_entry(ptable, struct ptdesc, pt_list))
+#define PD_MARKBITS(dp) (*(unsigned int *)&PD_PTDESC(dp)->pt_index)
 
 static const int ptable_shift[3] = {
 	7+2, /* PGD */
@@ -139,7 +140,7 @@ void __init init_pointer_table(void *table, int type)
 	return;
 }
 
-void *get_pointer_table(int type)
+void *get_pointer_table(struct mm_struct *mm, int type)
 {
 	ptable_desc *dp = ptable_list[type].next;
 	unsigned int mask = list_empty(&ptable_list[type]) ? 0 : PD_MARKBITS(dp);
@@ -164,10 +165,10 @@ void *get_pointer_table(int type)
 			 * m68k doesn't have SPLIT_PTE_PTLOCKS for not having
 			 * SMP.
 			 */
-			pagetable_pte_ctor(virt_to_ptdesc(page));
+			pagetable_pte_ctor(mm, virt_to_ptdesc(page));
 			break;
 		case TABLE_PMD:
-			pagetable_pmd_ctor(virt_to_ptdesc(page));
+			pagetable_pmd_ctor(mm, virt_to_ptdesc(page));
 			break;
 		case TABLE_PGD:
 			pagetable_pgd_ctor(virt_to_ptdesc(page));
diff --git linux-libre-6.15-gnu/arch/microblaze/include/asm/pgtable.h linux-libre-6.16-gnu/arch/microblaze/include/asm/pgtable.h
index e4ea2ec3642f..bae1abfa6f6b 100644
--- linux-libre-6.15-gnu/arch/microblaze/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/microblaze/include/asm/pgtable.h
@@ -285,14 +285,6 @@ static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
 	return pte;
 }
 
-#define mk_pte(page, pgprot) \
-({									   \
-	pte_t pte;							   \
-	pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) |  \
-			pgprot_val(pgprot);				   \
-	pte;								   \
-})
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -406,7 +398,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/microblaze/include/asm/syscall.h linux-libre-6.16-gnu/arch/microblaze/include/asm/syscall.h
index 5eb3f624cc59..b5b6b91fae3e 100644
--- linux-libre-6.15-gnu/arch/microblaze/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/microblaze/include/asm/syscall.h
@@ -14,6 +14,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->r12;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->r12 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
diff --git linux-libre-6.15-gnu/arch/microblaze/kernel/Makefile linux-libre-6.16-gnu/arch/microblaze/kernel/Makefile
index 85c4d29ef43e..241e466e7333 100644
--- linux-libre-6.15-gnu/arch/microblaze/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/microblaze/kernel/Makefile
@@ -11,7 +11,7 @@ CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_process.o = -pg
 endif
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o dma.o exceptions.o \
 	hw_exception_handler.o irq.o \
diff --git linux-libre-6.15-gnu/arch/microblaze/kernel/timer.c linux-libre-6.16-gnu/arch/microblaze/kernel/timer.c
index 26c385582c3b..ccb4b4b59bca 100644
--- linux-libre-6.15-gnu/arch/microblaze/kernel/timer.c
+++ linux-libre-6.16-gnu/arch/microblaze/kernel/timer.c
@@ -252,7 +252,7 @@ static int __init xilinx_timer_init(struct device_node *timer)
 	int ret;
 
 	/* If this property is present, the device is a PWM and not a timer */
-	if (of_property_read_bool(timer, "#pwm-cells"))
+	if (of_property_present(timer, "#pwm-cells"))
 		return 0;
 
 	if (initialized)
diff --git linux-libre-6.15-gnu/arch/microblaze/mm/pgtable.c linux-libre-6.16-gnu/arch/microblaze/mm/pgtable.c
index 9f73265aad4e..e96dd1b7aba4 100644
--- linux-libre-6.15-gnu/arch/microblaze/mm/pgtable.c
+++ linux-libre-6.16-gnu/arch/microblaze/mm/pgtable.c
@@ -245,7 +245,7 @@ unsigned long iopa(unsigned long addr)
 __ref pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 {
 	if (mem_init_done)
-		return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		return __pte_alloc_one_kernel(mm);
 	else
 		return memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
 					      MEMBLOCK_LOW_LIMIT,
diff --git linux-libre-6.15-gnu/arch/mips/Kbuild.platforms linux-libre-6.16-gnu/arch/mips/Kbuild.platforms
index bca37ddf974b..41a00fa860c1 100644
--- linux-libre-6.15-gnu/arch/mips/Kbuild.platforms
+++ linux-libre-6.16-gnu/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
 platform-$(CONFIG_EYEQ)			+= mobileye/
 platform-$(CONFIG_MIPS_COBALT)		+= cobalt/
 platform-$(CONFIG_MACH_DECSTATION)	+= dec/
+platform-$(CONFIG_ECONET)		+= econet/
 platform-$(CONFIG_MIPS_GENERIC)		+= generic/
 platform-$(CONFIG_MACH_JAZZ)		+= jazz/
 platform-$(CONFIG_LANTIQ)		+= lantiq/
diff --git linux-libre-6.15-gnu/arch/mips/Kconfig linux-libre-6.16-gnu/arch/mips/Kconfig
index fc0772c1bad4..1e48184ecf1e 100644
--- linux-libre-6.15-gnu/arch/mips/Kconfig
+++ linux-libre-6.16-gnu/arch/mips/Kconfig
@@ -391,6 +391,31 @@ config MACH_DECSTATION
 
 	  otherwise choose R3000.
 
+config ECONET
+	bool "EcoNet MIPS family"
+	select BOOT_RAW
+	select CPU_BIG_ENDIAN
+	select DEBUG_ZBOOT if DEBUG_KERNEL
+	select EARLY_PRINTK_8250
+	select ECONET_EN751221_TIMER
+	select SERIAL_8250
+	select SERIAL_OF_PLATFORM
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_ZBOOT_UART16550
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select USE_OF
+	help
+	  EcoNet EN75xx MIPS devices are big endian MIPS machines used
+	  in XPON (fiber) and DSL applications. They have SPI, PCI, USB,
+	  GPIO, and Ethernet, with optional XPON, DSL, and VoIP DSP cores.
+	  Don't confuse these with the Airoha ARM devices sometimes referred
+	  to as "EcoNet", this family is for MIPS based devices only.
+
 config MACH_JAZZ
 	bool "Jazz family of machines"
 	select ARC_MEMORY
@@ -617,6 +642,7 @@ config EYEQ
 	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USE_OF
+	select HOTPLUG_PARALLEL if SMP
 	help
 	  Select this to build a kernel supporting EyeQ SoC from Mobileye.
 
@@ -1020,6 +1046,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
+source "arch/mips/econet/Kconfig"
 source "arch/mips/generic/Kconfig"
 source "arch/mips/ingenic/Kconfig"
 source "arch/mips/jazz/Kconfig"
@@ -2287,6 +2314,7 @@ config MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPS_PM if HOTPLUG_CPU
 	select SMP
+	select HOTPLUG_SMT if HOTPLUG_PARALLEL
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
diff --git linux-libre-6.15-gnu/arch/mips/alchemy/common/gpiolib.c linux-libre-6.16-gnu/arch/mips/alchemy/common/gpiolib.c
index 1b16daaa86ae..411f70ceb762 100644
--- linux-libre-6.15-gnu/arch/mips/alchemy/common/gpiolib.c
+++ linux-libre-6.16-gnu/arch/mips/alchemy/common/gpiolib.c
@@ -119,9 +119,11 @@ static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
 	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
 }
 
-static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+static int alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
 {
 	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+
+	return 0;
 }
 
 static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
@@ -145,7 +147,7 @@ static struct gpio_chip au1300_gpiochip = {
 	.direction_input	= alchemy_gpic_dir_input,
 	.direction_output	= alchemy_gpic_dir_output,
 	.get			= alchemy_gpic_get,
-	.set			= alchemy_gpic_set,
+	.set_rv			= alchemy_gpic_set,
 	.to_irq			= alchemy_gpic_gpio_to_irq,
 	.base			= AU1300_GPIO_BASE,
 	.ngpio			= AU1300_GPIO_NUM,
diff --git linux-libre-6.15-gnu/arch/mips/ath25/ar2315.c linux-libre-6.16-gnu/arch/mips/ath25/ar2315.c
index 8ccf167c167e..e8c38aaf46a2 100644
--- linux-libre-6.15-gnu/arch/mips/ath25/ar2315.c
+++ linux-libre-6.16-gnu/arch/mips/ath25/ar2315.c
@@ -149,8 +149,8 @@ void __init ar2315_arch_init_irq(void)
 
 	ath25_irq_dispatch = ar2315_irq_dispatch;
 
-	domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
-				       &ar2315_misc_irq_domain_ops, NULL);
+	domain = irq_domain_create_linear(NULL, AR2315_MISC_IRQ_COUNT,
+					  &ar2315_misc_irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add IRQ domain");
 
diff --git linux-libre-6.15-gnu/arch/mips/ath25/ar5312.c linux-libre-6.16-gnu/arch/mips/ath25/ar5312.c
index cfa103518113..4a1d874be766 100644
--- linux-libre-6.15-gnu/arch/mips/ath25/ar5312.c
+++ linux-libre-6.16-gnu/arch/mips/ath25/ar5312.c
@@ -143,8 +143,8 @@ void __init ar5312_arch_init_irq(void)
 
 	ath25_irq_dispatch = ar5312_irq_dispatch;
 
-	domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT,
-				       &ar5312_misc_irq_domain_ops, NULL);
+	domain = irq_domain_create_linear(NULL, AR5312_MISC_IRQ_COUNT,
+					  &ar5312_misc_irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add IRQ domain");
 
diff --git linux-libre-6.15-gnu/arch/mips/bcm47xx/setup.c linux-libre-6.16-gnu/arch/mips/bcm47xx/setup.c
index 247be207f293..de426a474b5b 100644
--- linux-libre-6.15-gnu/arch/mips/bcm47xx/setup.c
+++ linux-libre-6.16-gnu/arch/mips/bcm47xx/setup.c
@@ -282,7 +282,7 @@ static int __init bcm47xx_register_bus_complete(void)
 	bcm47xx_leds_register();
 	bcm47xx_workarounds();
 
-	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
+	fixed_phy_add(0, &bcm47xx_fixed_phy_status);
 	return 0;
 }
 device_initcall(bcm47xx_register_bus_complete);
diff --git linux-libre-6.15-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c linux-libre-6.16-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 9cc8fbf218a5..c5617b889b1c 100644
--- linux-libre-6.15-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ linux-libre-6.16-gnu/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -764,7 +764,7 @@ void __init board_prom_init(void)
 			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
 		}
 	} else {
-		strcpy(cfe_version, "unknown");
+		strscpy(cfe_version, "unknown");
 	}
 	pr_info("CFE version: %s\n", cfe_version);
 
diff --git linux-libre-6.15-gnu/arch/mips/bcm63xx/gpio.c linux-libre-6.16-gnu/arch/mips/bcm63xx/gpio.c
index 5c4a233db55f..e7a53cd0dec5 100644
--- linux-libre-6.15-gnu/arch/mips/bcm63xx/gpio.c
+++ linux-libre-6.16-gnu/arch/mips/bcm63xx/gpio.c
@@ -35,8 +35,7 @@ static void bcm63xx_gpio_out_low_reg_init(void)
 static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
 static u32 gpio_out_low, gpio_out_high;
 
-static void bcm63xx_gpio_set(struct gpio_chip *chip,
-			     unsigned gpio, int val)
+static int bcm63xx_gpio_set(struct gpio_chip *chip, unsigned int gpio, int val)
 {
 	u32 reg;
 	u32 mask;
@@ -62,6 +61,8 @@ static void bcm63xx_gpio_set(struct gpio_chip *chip,
 		*v &= ~mask;
 	bcm_gpio_writel(*v, reg);
 	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+
+	return 0;
 }
 
 static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
@@ -130,7 +131,7 @@ static struct gpio_chip bcm63xx_gpio_chip = {
 	.direction_input	= bcm63xx_gpio_direction_input,
 	.direction_output	= bcm63xx_gpio_direction_output,
 	.get			= bcm63xx_gpio_get,
-	.set			= bcm63xx_gpio_set,
+	.set_rv			= bcm63xx_gpio_set,
 	.base			= 0,
 };
 
diff --git linux-libre-6.15-gnu/arch/mips/boot/compressed/uart-16550.c linux-libre-6.16-gnu/arch/mips/boot/compressed/uart-16550.c
index db618e72a0c4..529e77a6487c 100644
--- linux-libre-6.15-gnu/arch/mips/boot/compressed/uart-16550.c
+++ linux-libre-6.16-gnu/arch/mips/boot/compressed/uart-16550.c
@@ -20,6 +20,11 @@
 #define PORT(offset) (CKSEG1ADDR(INGENIC_UART_BASE_ADDR) + (4 * offset))
 #endif
 
+#ifdef CONFIG_ECONET
+#define EN75_UART_BASE	0x1fbf0003
+#define PORT(offset)	(CKSEG1ADDR(EN75_UART_BASE) + (4 * (offset)))
+#endif
+
 #ifndef IOTYPE
 #define IOTYPE char
 #endif
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/Makefile linux-libre-6.16-gnu/arch/mips/boot/dts/Makefile
index ff468439a8c4..7375c6ced82b 100644
--- linux-libre-6.15-gnu/arch/mips/boot/dts/Makefile
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-$(CONFIG_BMIPS_GENERIC)		+= brcm
 subdir-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon
+subdir-$(CONFIG_ECONET)			+= econet
 subdir-$(CONFIG_EYEQ)			+= mobileye
 subdir-$(CONFIG_FIT_IMAGE_FDT_MARDUK)   += img
 subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/econet/Makefile linux-libre-6.16-gnu/arch/mips/boot/dts/econet/Makefile
new file mode 100644
index 000000000000..b467d5624e39
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/econet/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_ECONET_SMARTFIBER_XP8421_B)	+= en751221_smartfiber_xp8421-b.dtb
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/econet/en751221.dtsi linux-libre-6.16-gnu/arch/mips/boot/dts/econet/en751221.dtsi
new file mode 100644
index 000000000000..66197e73d4f0
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/econet/en751221.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/ {
+	compatible = "econet,en751221";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	hpt_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;  /* 200 MHz */
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24KEc";
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	intc: interrupt-controller@1fb40000 {
+		compatible = "econet,en751221-intc";
+		reg = <0x1fb40000 0x100>;
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
+	};
+
+	uart: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupt-parent = <&intc>;
+		interrupts = <0>;
+		/*
+		 * Conversion of baud rate to clock frequency requires a
+		 * computation that is not in the ns16550 driver, so this
+		 * uart is fixed at 115200 baud.
+		 */
+		clock-frequency = <1843200>;
+	};
+
+	timer_hpt: timer@1fbf0400 {
+		compatible = "econet,en751221-timer";
+		reg = <0x1fbf0400 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+		clocks = <&hpt_clock>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts linux-libre-6.16-gnu/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
new file mode 100644
index 000000000000..8223c5bce67f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "en751221.dtsi"
+
+/ {
+	model = "SmartFiber XP8421-B";
+	compatible = "smartfiber,xp8421-b", "econet,en751221";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x1c000000>;
+	};
+
+	chosen {
+		stdout-path = "/serial@1fbf0000:115200";
+		linux,usable-memory-range = <0x00020000 0x1bfe0000>;
+	};
+};
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts linux-libre-6.16-gnu/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
index c7ea4f1c0bb2..6c277ab83d4b 100644
--- linux-libre-6.15-gnu/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
@@ -29,6 +29,7 @@
 		compatible = "loongson,pch-msi-1.0";
 		reg = <0 0x2ff00000 0 0x8>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		msi-controller;
 		loongson,msi-base-vec = <64>;
 		loongson,msi-num-vecs = <64>;
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/pic32/pic32mzda.dtsi linux-libre-6.16-gnu/arch/mips/boot/dts/pic32/pic32mzda.dtsi
index fdc721b414a8..feca35ba56a4 100644
--- linux-libre-6.15-gnu/arch/mips/boot/dts/pic32/pic32mzda.dtsi
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -225,7 +225,7 @@
 		gpio-ranges = <&pic32_pinctrl 0 144 16>;
 	};
 
-	sdhci: sdhci@1f8ec000 {
+	sdhci: mmc@1f8ec000 {
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-6.15-gnu/arch/mips/boot/dts/realtek/rtl930x.dtsi linux-libre-6.16-gnu/arch/mips/boot/dts/realtek/rtl930x.dtsi
index f2e57ea3a60c..101bab72a95f 100644
--- linux-libre-6.15-gnu/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ linux-libre-6.16-gnu/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -69,6 +69,39 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		mdio_controller: mdio-controller@ca00 {
+			compatible = "realtek,rtl9301-mdio";
+			reg = <0xca00 0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio0: mdio-bus@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio1: mdio-bus@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio2: mdio-bus@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio3: mdio-bus@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
 	};
 
 	soc: soc@18000000 {
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/Kconfig linux-libre-6.16-gnu/arch/mips/cavium-octeon/Kconfig
index 450e979ef5d9..11f4aa6e80e9 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/Kconfig
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/Kconfig
@@ -23,6 +23,12 @@ config CAVIUM_OCTEON_CVMSEG_SIZE
 	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
 	  between zero and 6192 bytes).
 
+config CRYPTO_SHA256_OCTEON
+	tristate
+	default CRYPTO_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256
+	select CRYPTO_LIB_SHA256_GENERIC
+
 endif # CPU_CAVIUM_OCTEON
 
 if CAVIUM_OCTEON_SOC
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-md5.c linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-md5.c
index 5ee4ade99b99..fbc84eb7fedf 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-md5.c
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-md5.c
@@ -19,22 +19,26 @@
  * any later version.
  */
 
+#include <asm/octeon/octeon.h>
+#include <crypto/internal/hash.h>
 #include <crypto/md5.h>
-#include <linux/init.h>
-#include <linux/types.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
+#include <linux/unaligned.h>
 
 #include "octeon-crypto.h"
 
+struct octeon_md5_state {
+	__le32 hash[MD5_HASH_WORDS];
+	u64 byte_count;
+};
+
 /*
  * We pass everything as 64-bit. OCTEON can handle misaligned data.
  */
 
-static void octeon_md5_store_hash(struct md5_state *ctx)
+static void octeon_md5_store_hash(struct octeon_md5_state *ctx)
 {
 	u64 *hash = (u64 *)ctx->hash;
 
@@ -42,7 +46,7 @@ static void octeon_md5_store_hash(struct md5_state *ctx)
 	write_octeon_64bit_hash_dword(hash[1], 1);
 }
 
-static void octeon_md5_read_hash(struct md5_state *ctx)
+static void octeon_md5_read_hash(struct octeon_md5_state *ctx)
 {
 	u64 *hash = (u64 *)ctx->hash;
 
@@ -66,13 +70,12 @@ static void octeon_md5_transform(const void *_block)
 
 static int octeon_md5_init(struct shash_desc *desc)
 {
-	struct md5_state *mctx = shash_desc_ctx(desc);
+	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
 
-	mctx->hash[0] = MD5_H0;
-	mctx->hash[1] = MD5_H1;
-	mctx->hash[2] = MD5_H2;
-	mctx->hash[3] = MD5_H3;
-	cpu_to_le32_array(mctx->hash, 4);
+	mctx->hash[0] = cpu_to_le32(MD5_H0);
+	mctx->hash[1] = cpu_to_le32(MD5_H1);
+	mctx->hash[2] = cpu_to_le32(MD5_H2);
+	mctx->hash[3] = cpu_to_le32(MD5_H3);
 	mctx->byte_count = 0;
 
 	return 0;
@@ -81,52 +84,38 @@ static int octeon_md5_init(struct shash_desc *desc)
 static int octeon_md5_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
 {
-	struct md5_state *mctx = shash_desc_ctx(desc);
-	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
+	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
 	struct octeon_cop2_state state;
 	unsigned long flags;
 
 	mctx->byte_count += len;
-
-	if (avail > len) {
-		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
-		       data, len);
-		return 0;
-	}
-
-	memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data,
-	       avail);
-
 	flags = octeon_crypto_enable(&state);
 	octeon_md5_store_hash(mctx);
 
-	octeon_md5_transform(mctx->block);
-	data += avail;
-	len -= avail;
-
-	while (len >= sizeof(mctx->block)) {
+	do {
 		octeon_md5_transform(data);
-		data += sizeof(mctx->block);
-		len -= sizeof(mctx->block);
-	}
+		data += MD5_HMAC_BLOCK_SIZE;
+		len -= MD5_HMAC_BLOCK_SIZE;
+	} while (len >= MD5_HMAC_BLOCK_SIZE);
 
 	octeon_md5_read_hash(mctx);
 	octeon_crypto_disable(&state, flags);
-
-	memcpy(mctx->block, data, len);
-
-	return 0;
+	mctx->byte_count -= len;
+	return len;
 }
 
-static int octeon_md5_final(struct shash_desc *desc, u8 *out)
+static int octeon_md5_finup(struct shash_desc *desc, const u8 *src,
+			    unsigned int offset, u8 *out)
 {
-	struct md5_state *mctx = shash_desc_ctx(desc);
-	const unsigned int offset = mctx->byte_count & 0x3f;
-	char *p = (char *)mctx->block + offset;
+	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
 	int padding = 56 - (offset + 1);
 	struct octeon_cop2_state state;
+	u32 block[MD5_BLOCK_WORDS];
 	unsigned long flags;
+	char *p;
 
+	p = memcpy(block, src, offset);
+	p += offset;
 	*p++ = 0x80;
 
 	flags = octeon_crypto_enable(&state);
@@ -134,39 +123,56 @@ static int octeon_md5_final(struct shash_desc *desc, u8 *out)
 
 	if (padding < 0) {
 		memset(p, 0x00, padding + sizeof(u64));
-		octeon_md5_transform(mctx->block);
-		p = (char *)mctx->block;
+		octeon_md5_transform(block);
+		p = (char *)block;
 		padding = 56;
 	}
 
 	memset(p, 0, padding);
-	mctx->block[14] = mctx->byte_count << 3;
-	mctx->block[15] = mctx->byte_count >> 29;
-	cpu_to_le32_array(mctx->block + 14, 2);
-	octeon_md5_transform(mctx->block);
+	mctx->byte_count += offset;
+	block[14] = mctx->byte_count << 3;
+	block[15] = mctx->byte_count >> 29;
+	cpu_to_le32_array(block + 14, 2);
+	octeon_md5_transform(block);
 
 	octeon_md5_read_hash(mctx);
 	octeon_crypto_disable(&state, flags);
 
+	memzero_explicit(block, sizeof(block));
 	memcpy(out, mctx->hash, sizeof(mctx->hash));
-	memset(mctx, 0, sizeof(*mctx));
 
 	return 0;
 }
 
 static int octeon_md5_export(struct shash_desc *desc, void *out)
 {
-	struct md5_state *ctx = shash_desc_ctx(desc);
-
-	memcpy(out, ctx, sizeof(*ctx));
+	struct octeon_md5_state *ctx = shash_desc_ctx(desc);
+	union {
+		u8 *u8;
+		u32 *u32;
+		u64 *u64;
+	} p = { .u8 = out };
+	int i;
+
+	for (i = 0; i < MD5_HASH_WORDS; i++)
+		put_unaligned(le32_to_cpu(ctx->hash[i]), p.u32++);
+	put_unaligned(ctx->byte_count, p.u64);
 	return 0;
 }
 
 static int octeon_md5_import(struct shash_desc *desc, const void *in)
 {
-	struct md5_state *ctx = shash_desc_ctx(desc);
-
-	memcpy(ctx, in, sizeof(*ctx));
+	struct octeon_md5_state *ctx = shash_desc_ctx(desc);
+	union {
+		const u8 *u8;
+		const u32 *u32;
+		const u64 *u64;
+	} p = { .u8 = in };
+	int i;
+
+	for (i = 0; i < MD5_HASH_WORDS; i++)
+		ctx->hash[i] = cpu_to_le32(get_unaligned(p.u32++));
+	ctx->byte_count = get_unaligned(p.u64);
 	return 0;
 }
 
@@ -174,15 +180,16 @@ static struct shash_alg alg = {
 	.digestsize	=	MD5_DIGEST_SIZE,
 	.init		=	octeon_md5_init,
 	.update		=	octeon_md5_update,
-	.final		=	octeon_md5_final,
+	.finup		=	octeon_md5_finup,
 	.export		=	octeon_md5_export,
 	.import		=	octeon_md5_import,
-	.descsize	=	sizeof(struct md5_state),
-	.statesize	=	sizeof(struct md5_state),
+	.statesize	=	MD5_STATE_SIZE,
+	.descsize	=	sizeof(struct octeon_md5_state),
 	.base		=	{
 		.cra_name	=	"md5",
 		.cra_driver_name=	"octeon-md5",
 		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha1.c linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha1.c
index 37a07b3c4568..e70f21a473da 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha1.c
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha1.c
@@ -13,15 +13,13 @@
  * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
  */
 
-#include <linux/mm.h>
+#include <asm/octeon/octeon.h>
+#include <crypto/internal/hash.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
 
 #include "octeon-crypto.h"
 
@@ -58,49 +56,23 @@ static void octeon_sha1_read_hash(struct sha1_state *sctx)
 	memzero_explicit(&hash_tail.dword, sizeof(hash_tail.dword));
 }
 
-static void octeon_sha1_transform(const void *_block)
+static void octeon_sha1_transform(struct sha1_state *sctx, const u8 *src,
+				  int blocks)
 {
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_sha1_start(block[7]);
-}
-
-static void __octeon_sha1_update(struct sha1_state *sctx, const u8 *data,
-				 unsigned int len)
-{
-	unsigned int partial;
-	unsigned int done;
-	const u8 *src;
-
-	partial = sctx->count % SHA1_BLOCK_SIZE;
-	sctx->count += len;
-	done = 0;
-	src = data;
-
-	if ((partial + len) >= SHA1_BLOCK_SIZE) {
-		if (partial) {
-			done = -partial;
-			memcpy(sctx->buffer + partial, data,
-			       done + SHA1_BLOCK_SIZE);
-			src = sctx->buffer;
-		}
-
-		do {
-			octeon_sha1_transform(src);
-			done += SHA1_BLOCK_SIZE;
-			src = data + done;
-		} while (done + SHA1_BLOCK_SIZE <= len);
-
-		partial = 0;
-	}
-	memcpy(sctx->buffer + partial, src, len - done);
+	do {
+		const u64 *block = (const u64 *)src;
+
+		write_octeon_64bit_block_dword(block[0], 0);
+		write_octeon_64bit_block_dword(block[1], 1);
+		write_octeon_64bit_block_dword(block[2], 2);
+		write_octeon_64bit_block_dword(block[3], 3);
+		write_octeon_64bit_block_dword(block[4], 4);
+		write_octeon_64bit_block_dword(block[5], 5);
+		write_octeon_64bit_block_dword(block[6], 6);
+		octeon_sha1_start(block[7]);
+
+		src += SHA1_BLOCK_SIZE;
+	} while (--blocks);
 }
 
 static int octeon_sha1_update(struct shash_desc *desc, const u8 *data,
@@ -109,95 +81,47 @@ static int octeon_sha1_update(struct shash_desc *desc, const u8 *data,
 	struct sha1_state *sctx = shash_desc_ctx(desc);
 	struct octeon_cop2_state state;
 	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha1 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return crypto_sha1_update(desc, data, len);
+	int remain;
 
 	flags = octeon_crypto_enable(&state);
 	octeon_sha1_store_hash(sctx);
 
-	__octeon_sha1_update(sctx, data, len);
+	remain = sha1_base_do_update_blocks(desc, data, len,
+					    octeon_sha1_transform);
 
 	octeon_sha1_read_hash(sctx);
 	octeon_crypto_disable(&state, flags);
-
-	return 0;
+	return remain;
 }
 
-static int octeon_sha1_final(struct shash_desc *desc, u8 *out)
+static int octeon_sha1_finup(struct shash_desc *desc, const u8 *src,
+			     unsigned int len, u8 *out)
 {
 	struct sha1_state *sctx = shash_desc_ctx(desc);
-	static const u8 padding[64] = { 0x80, };
 	struct octeon_cop2_state state;
-	__be32 *dst = (__be32 *)out;
-	unsigned int pad_len;
 	unsigned long flags;
-	unsigned int index;
-	__be64 bits;
-	int i;
-
-	/* Save number of bits. */
-	bits = cpu_to_be64(sctx->count << 3);
-
-	/* Pad out to 56 mod 64. */
-	index = sctx->count & 0x3f;
-	pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
 
 	flags = octeon_crypto_enable(&state);
 	octeon_sha1_store_hash(sctx);
 
-	__octeon_sha1_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha1_update(sctx, (const u8 *)&bits, sizeof(bits));
+	sha1_base_do_finup(desc, src, len, octeon_sha1_transform);
 
 	octeon_sha1_read_hash(sctx);
 	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest */
-	for (i = 0; i < 5; i++)
-		dst[i] = cpu_to_be32(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(*sctx));
-
-	return 0;
-}
-
-static int octeon_sha1_export(struct shash_desc *desc, void *out)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int octeon_sha1_import(struct shash_desc *desc, const void *in)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
+	return sha1_base_finish(desc, out);
 }
 
 static struct shash_alg octeon_sha1_alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_base_init,
 	.update		=	octeon_sha1_update,
-	.final		=	octeon_sha1_final,
-	.export		=	octeon_sha1_export,
-	.import		=	octeon_sha1_import,
-	.descsize	=	sizeof(struct sha1_state),
-	.statesize	=	sizeof(struct sha1_state),
+	.finup		=	octeon_sha1_finup,
+	.descsize	=	SHA1_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"octeon-sha1",
 		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	SHA1_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha256.c linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha256.c
index 435e4a6e7f13..f93faaf1f4af 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha256.c
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha256.c
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Cryptographic API.
- *
- * SHA-224 and SHA-256 Secure Hash Algorithm.
+ * SHA-256 Secure Hash Algorithm.
  *
  * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
  *
@@ -14,15 +12,10 @@
  * SHA224 Support Copyright 2007 Intel Corporation <jonathan.lynch@intel.com>
  */
 
-#include <linux/mm.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
 #include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
+#include <crypto/internal/sha2.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 
 #include "octeon-crypto.h"
 
@@ -30,212 +23,51 @@
  * We pass everything as 64-bit. OCTEON can handle misaligned data.
  */
 
-static void octeon_sha256_store_hash(struct sha256_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-
-	write_octeon_64bit_hash_dword(hash[0], 0);
-	write_octeon_64bit_hash_dword(hash[1], 1);
-	write_octeon_64bit_hash_dword(hash[2], 2);
-	write_octeon_64bit_hash_dword(hash[3], 3);
-}
-
-static void octeon_sha256_read_hash(struct sha256_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-
-	hash[0] = read_octeon_64bit_hash_dword(0);
-	hash[1] = read_octeon_64bit_hash_dword(1);
-	hash[2] = read_octeon_64bit_hash_dword(2);
-	hash[3] = read_octeon_64bit_hash_dword(3);
-}
-
-static void octeon_sha256_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_sha256_start(block[7]);
-}
-
-static void __octeon_sha256_update(struct sha256_state *sctx, const u8 *data,
-				   unsigned int len)
-{
-	unsigned int partial;
-	unsigned int done;
-	const u8 *src;
-
-	partial = sctx->count % SHA256_BLOCK_SIZE;
-	sctx->count += len;
-	done = 0;
-	src = data;
-
-	if ((partial + len) >= SHA256_BLOCK_SIZE) {
-		if (partial) {
-			done = -partial;
-			memcpy(sctx->buf + partial, data,
-			       done + SHA256_BLOCK_SIZE);
-			src = sctx->buf;
-		}
-
-		do {
-			octeon_sha256_transform(src);
-			done += SHA256_BLOCK_SIZE;
-			src = data + done;
-		} while (done + SHA256_BLOCK_SIZE <= len);
-
-		partial = 0;
-	}
-	memcpy(sctx->buf + partial, src, len - done);
-}
-
-static int octeon_sha256_update(struct shash_desc *desc, const u8 *data,
-				unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha256 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_update(desc, data, len);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha256_store_hash(sctx);
-
-	__octeon_sha256_update(sctx, data, len);
-
-	octeon_sha256_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	return 0;
-}
-
-static int octeon_sha256_final(struct shash_desc *desc, u8 *out)
+void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
 {
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	static const u8 padding[64] = { 0x80, };
-	struct octeon_cop2_state state;
-	__be32 *dst = (__be32 *)out;
-	unsigned int pad_len;
+	struct octeon_cop2_state cop2_state;
+	u64 *state64 = (u64 *)state;
 	unsigned long flags;
-	unsigned int index;
-	__be64 bits;
-	int i;
-
-	/* Save number of bits. */
-	bits = cpu_to_be64(sctx->count << 3);
-
-	/* Pad out to 56 mod 64. */
-	index = sctx->count & 0x3f;
-	pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha256_store_hash(sctx);
-
-	__octeon_sha256_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha256_update(sctx, (const u8 *)&bits, sizeof(bits));
-
-	octeon_sha256_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest */
-	for (i = 0; i < 8; i++)
-		dst[i] = cpu_to_be32(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(*sctx));
-
-	return 0;
-}
-
-static int octeon_sha224_final(struct shash_desc *desc, u8 *hash)
-{
-	u8 D[SHA256_DIGEST_SIZE];
-
-	octeon_sha256_final(desc, D);
 
-	memcpy(hash, D, SHA224_DIGEST_SIZE);
-	memzero_explicit(D, SHA256_DIGEST_SIZE);
-
-	return 0;
-}
-
-static int octeon_sha256_export(struct shash_desc *desc, void *out)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int octeon_sha256_import(struct shash_desc *desc, const void *in)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
-}
-
-static struct shash_alg octeon_sha256_algs[2] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	octeon_sha256_update,
-	.final		=	octeon_sha256_final,
-	.export		=	octeon_sha256_export,
-	.import		=	octeon_sha256_import,
-	.descsize	=	sizeof(struct sha256_state),
-	.statesize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name=	"octeon-sha256",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	octeon_sha256_update,
-	.final		=	octeon_sha224_final,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name=	"octeon-sha224",
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init octeon_sha256_mod_init(void)
-{
 	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shashes(octeon_sha256_algs,
-				       ARRAY_SIZE(octeon_sha256_algs));
+		return sha256_blocks_generic(state, data, nblocks);
+
+	flags = octeon_crypto_enable(&cop2_state);
+	write_octeon_64bit_hash_dword(state64[0], 0);
+	write_octeon_64bit_hash_dword(state64[1], 1);
+	write_octeon_64bit_hash_dword(state64[2], 2);
+	write_octeon_64bit_hash_dword(state64[3], 3);
+
+	do {
+		const u64 *block = (const u64 *)data;
+
+		write_octeon_64bit_block_dword(block[0], 0);
+		write_octeon_64bit_block_dword(block[1], 1);
+		write_octeon_64bit_block_dword(block[2], 2);
+		write_octeon_64bit_block_dword(block[3], 3);
+		write_octeon_64bit_block_dword(block[4], 4);
+		write_octeon_64bit_block_dword(block[5], 5);
+		write_octeon_64bit_block_dword(block[6], 6);
+		octeon_sha256_start(block[7]);
+
+		data += SHA256_BLOCK_SIZE;
+	} while (--nblocks);
+
+	state64[0] = read_octeon_64bit_hash_dword(0);
+	state64[1] = read_octeon_64bit_hash_dword(1);
+	state64[2] = read_octeon_64bit_hash_dword(2);
+	state64[3] = read_octeon_64bit_hash_dword(3);
+	octeon_crypto_disable(&cop2_state, flags);
 }
+EXPORT_SYMBOL_GPL(sha256_blocks_arch);
 
-static void __exit octeon_sha256_mod_fini(void)
+bool sha256_is_arch_optimized(void)
 {
-	crypto_unregister_shashes(octeon_sha256_algs,
-				  ARRAY_SIZE(octeon_sha256_algs));
+	return octeon_has_crypto();
 }
-
-module_init(octeon_sha256_mod_init);
-module_exit(octeon_sha256_mod_fini);
+EXPORT_SYMBOL_GPL(sha256_is_arch_optimized);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm (OCTEON)");
+MODULE_DESCRIPTION("SHA-256 Secure Hash Algorithm (OCTEON)");
 MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha512.c linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha512.c
index 2dee9354e33f..215311053db3 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/crypto/octeon-sha512.c
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/crypto/octeon-sha512.c
@@ -13,15 +13,12 @@
  * Copyright (c) 2003 Kyle McMartin <kyle@debian.org>
  */
 
-#include <linux/mm.h>
+#include <asm/octeon/octeon.h>
+#include <crypto/internal/hash.h>
 #include <crypto/sha2.h>
 #include <crypto/sha512_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
 
 #include "octeon-crypto.h"
 
@@ -53,60 +50,31 @@ static void octeon_sha512_read_hash(struct sha512_state *sctx)
 	sctx->state[7] = read_octeon_64bit_hash_sha512(7);
 }
 
-static void octeon_sha512_transform(const void *_block)
+static void octeon_sha512_transform(struct sha512_state *sctx,
+				    const u8 *src, int blocks)
 {
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_sha512(block[0], 0);
-	write_octeon_64bit_block_sha512(block[1], 1);
-	write_octeon_64bit_block_sha512(block[2], 2);
-	write_octeon_64bit_block_sha512(block[3], 3);
-	write_octeon_64bit_block_sha512(block[4], 4);
-	write_octeon_64bit_block_sha512(block[5], 5);
-	write_octeon_64bit_block_sha512(block[6], 6);
-	write_octeon_64bit_block_sha512(block[7], 7);
-	write_octeon_64bit_block_sha512(block[8], 8);
-	write_octeon_64bit_block_sha512(block[9], 9);
-	write_octeon_64bit_block_sha512(block[10], 10);
-	write_octeon_64bit_block_sha512(block[11], 11);
-	write_octeon_64bit_block_sha512(block[12], 12);
-	write_octeon_64bit_block_sha512(block[13], 13);
-	write_octeon_64bit_block_sha512(block[14], 14);
-	octeon_sha512_start(block[15]);
-}
-
-static void __octeon_sha512_update(struct sha512_state *sctx, const u8 *data,
-				   unsigned int len)
-{
-	unsigned int part_len;
-	unsigned int index;
-	unsigned int i;
-
-	/* Compute number of bytes mod 128. */
-	index = sctx->count[0] % SHA512_BLOCK_SIZE;
-
-	/* Update number of bytes. */
-	if ((sctx->count[0] += len) < len)
-		sctx->count[1]++;
-
-	part_len = SHA512_BLOCK_SIZE - index;
-
-	/* Transform as many times as possible. */
-	if (len >= part_len) {
-		memcpy(&sctx->buf[index], data, part_len);
-		octeon_sha512_transform(sctx->buf);
-
-		for (i = part_len; i + SHA512_BLOCK_SIZE <= len;
-			i += SHA512_BLOCK_SIZE)
-			octeon_sha512_transform(&data[i]);
-
-		index = 0;
-	} else {
-		i = 0;
-	}
-
-	/* Buffer remaining input. */
-	memcpy(&sctx->buf[index], &data[i], len - i);
+	do {
+		const u64 *block = (const u64 *)src;
+
+		write_octeon_64bit_block_sha512(block[0], 0);
+		write_octeon_64bit_block_sha512(block[1], 1);
+		write_octeon_64bit_block_sha512(block[2], 2);
+		write_octeon_64bit_block_sha512(block[3], 3);
+		write_octeon_64bit_block_sha512(block[4], 4);
+		write_octeon_64bit_block_sha512(block[5], 5);
+		write_octeon_64bit_block_sha512(block[6], 6);
+		write_octeon_64bit_block_sha512(block[7], 7);
+		write_octeon_64bit_block_sha512(block[8], 8);
+		write_octeon_64bit_block_sha512(block[9], 9);
+		write_octeon_64bit_block_sha512(block[10], 10);
+		write_octeon_64bit_block_sha512(block[11], 11);
+		write_octeon_64bit_block_sha512(block[12], 12);
+		write_octeon_64bit_block_sha512(block[13], 13);
+		write_octeon_64bit_block_sha512(block[14], 14);
+		octeon_sha512_start(block[15]);
+
+		src += SHA512_BLOCK_SIZE;
+	} while (--blocks);
 }
 
 static int octeon_sha512_update(struct shash_desc *desc, const u8 *data,
@@ -115,89 +83,48 @@ static int octeon_sha512_update(struct shash_desc *desc, const u8 *data,
 	struct sha512_state *sctx = shash_desc_ctx(desc);
 	struct octeon_cop2_state state;
 	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha512 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE)
-		return crypto_sha512_update(desc, data, len);
+	int remain;
 
 	flags = octeon_crypto_enable(&state);
 	octeon_sha512_store_hash(sctx);
 
-	__octeon_sha512_update(sctx, data, len);
+	remain = sha512_base_do_update_blocks(desc, data, len,
+					      octeon_sha512_transform);
 
 	octeon_sha512_read_hash(sctx);
 	octeon_crypto_disable(&state, flags);
-
-	return 0;
+	return remain;
 }
 
-static int octeon_sha512_final(struct shash_desc *desc, u8 *hash)
+static int octeon_sha512_finup(struct shash_desc *desc, const u8 *src,
+			       unsigned int len, u8 *hash)
 {
 	struct sha512_state *sctx = shash_desc_ctx(desc);
-	static u8 padding[128] = { 0x80, };
 	struct octeon_cop2_state state;
-	__be64 *dst = (__be64 *)hash;
-	unsigned int pad_len;
 	unsigned long flags;
-	unsigned int index;
-	__be64 bits[2];
-	int i;
-
-	/* Save number of bits. */
-	bits[1] = cpu_to_be64(sctx->count[0] << 3);
-	bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
-
-	/* Pad out to 112 mod 128. */
-	index = sctx->count[0] & 0x7f;
-	pad_len = (index < 112) ? (112 - index) : ((128+112) - index);
 
 	flags = octeon_crypto_enable(&state);
 	octeon_sha512_store_hash(sctx);
 
-	__octeon_sha512_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha512_update(sctx, (const u8 *)bits, sizeof(bits));
+	sha512_base_do_finup(desc, src, len, octeon_sha512_transform);
 
 	octeon_sha512_read_hash(sctx);
 	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest. */
-	for (i = 0; i < 8; i++)
-		dst[i] = cpu_to_be64(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(struct sha512_state));
-
-	return 0;
-}
-
-static int octeon_sha384_final(struct shash_desc *desc, u8 *hash)
-{
-	u8 D[64];
-
-	octeon_sha512_final(desc, D);
-
-	memcpy(hash, D, 48);
-	memzero_explicit(D, 64);
-
-	return 0;
+	return sha512_base_finish(desc, hash);
 }
 
 static struct shash_alg octeon_sha512_algs[2] = { {
 	.digestsize	=	SHA512_DIGEST_SIZE,
 	.init		=	sha512_base_init,
 	.update		=	octeon_sha512_update,
-	.final		=	octeon_sha512_final,
-	.descsize	=	sizeof(struct sha512_state),
+	.finup		=	octeon_sha512_finup,
+	.descsize	=	SHA512_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha512",
 		.cra_driver_name=	"octeon-sha512",
 		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize	=	SHA512_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
@@ -205,12 +132,14 @@ static struct shash_alg octeon_sha512_algs[2] = { {
 	.digestsize	=	SHA384_DIGEST_SIZE,
 	.init		=	sha384_base_init,
 	.update		=	octeon_sha512_update,
-	.final		=	octeon_sha384_final,
-	.descsize	=	sizeof(struct sha512_state),
+	.finup		=	octeon_sha512_finup,
+	.descsize	=	SHA512_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha384",
 		.cra_driver_name=	"octeon-sha384",
 		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY |
+					CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_blocksize	=	SHA384_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/mips/cavium-octeon/octeon-irq.c linux-libre-6.16-gnu/arch/mips/cavium-octeon/octeon-irq.c
index e6b4d9c0c169..5c3de175ef5b 100644
--- linux-libre-6.15-gnu/arch/mips/cavium-octeon/octeon-irq.c
+++ linux-libre-6.16-gnu/arch/mips/cavium-octeon/octeon-irq.c
@@ -1503,8 +1503,8 @@ static int __init octeon_irq_init_ciu(
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	ciu_domain = irq_domain_add_tree(
-		ciu_node, &octeon_irq_domain_ciu_ops, dd);
+	ciu_domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_irq_domain_ciu_ops,
+					    dd);
 	irq_set_default_domain(ciu_domain);
 
 	/* CIU_0 */
@@ -1637,8 +1637,8 @@ static int __init octeon_irq_init_gpio(
 	if (gpiod) {
 		/* gpio domain host_data is the base hwirq number. */
 		gpiod->base_hwirq = base_hwirq;
-		irq_domain_add_linear(
-			gpio_node, 16, &octeon_irq_domain_gpio_ops, gpiod);
+		irq_domain_create_linear(of_fwnode_handle(gpio_node), 16,
+					 &octeon_irq_domain_gpio_ops, gpiod);
 	} else {
 		pr_warn("Cannot allocate memory for GPIO irq_domain.\n");
 		return -ENOMEM;
@@ -2074,8 +2074,8 @@ static int __init octeon_irq_init_ciu2(
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	ciu_domain = irq_domain_add_tree(
-		ciu_node, &octeon_irq_domain_ciu2_ops, NULL);
+	ciu_domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_irq_domain_ciu2_ops,
+					    NULL);
 	irq_set_default_domain(ciu_domain);
 
 	/* CUI2 */
@@ -2331,11 +2331,12 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 	}
 	host_data->max_bits = val;
 
-	cib_domain = irq_domain_add_linear(ciu_node, host_data->max_bits,
-					   &octeon_irq_domain_cib_ops,
-					   host_data);
+	cib_domain = irq_domain_create_linear(of_fwnode_handle(ciu_node),
+					      host_data->max_bits,
+					      &octeon_irq_domain_cib_ops,
+					      host_data);
 	if (!cib_domain) {
-		pr_err("ERROR: Couldn't irq_domain_add_linear()\n");
+		pr_err("ERROR: Couldn't irq_domain_create_linear()\n");
 		return -ENOMEM;
 	}
 
@@ -2918,8 +2919,8 @@ static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 	 * Initialize all domains to use the default domain. Specific major
 	 * blocks will overwrite the default domain as needed.
 	 */
-	domain = irq_domain_add_tree(ciu_node, &octeon_dflt_domain_ciu3_ops,
-				     ciu3_info);
+	domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_dflt_domain_ciu3_ops,
+					ciu3_info);
 	for (i = 0; i < MAX_CIU3_DOMAINS; i++)
 		ciu3_info->domain[i] = domain;
 
diff --git linux-libre-6.15-gnu/arch/mips/configs/bigsur_defconfig linux-libre-6.16-gnu/arch/mips/configs/bigsur_defconfig
index 8f7c36868204..97d2cd997285 100644
--- linux-libre-6.15-gnu/arch/mips/configs/bigsur_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/bigsur_defconfig
@@ -81,7 +81,6 @@ CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
-CONFIG_IP_DCCP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
diff --git linux-libre-6.15-gnu/arch/mips/configs/cavium_octeon_defconfig linux-libre-6.16-gnu/arch/mips/configs/cavium_octeon_defconfig
index f523ee6f25bf..88ae0aa85364 100644
--- linux-libre-6.15-gnu/arch/mips/configs/cavium_octeon_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/cavium_octeon_defconfig
@@ -157,7 +157,6 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5_OCTEON=y
 CONFIG_CRYPTO_SHA1_OCTEON=m
-CONFIG_CRYPTO_SHA256_OCTEON=m
 CONFIG_CRYPTO_SHA512_OCTEON=m
 CONFIG_CRYPTO_DES=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git linux-libre-6.15-gnu/arch/mips/configs/decstation_64_defconfig linux-libre-6.16-gnu/arch/mips/configs/decstation_64_defconfig
index 9655567614aa..85a4472cb058 100644
--- linux-libre-6.15-gnu/arch/mips/configs/decstation_64_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/decstation_64_defconfig
@@ -168,7 +168,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
diff --git linux-libre-6.15-gnu/arch/mips/configs/decstation_defconfig linux-libre-6.16-gnu/arch/mips/configs/decstation_defconfig
index 1539fe8eb34d..a3b2c8da2dde 100644
--- linux-libre-6.15-gnu/arch/mips/configs/decstation_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/decstation_defconfig
@@ -163,7 +163,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
diff --git linux-libre-6.15-gnu/arch/mips/configs/decstation_r4k_defconfig linux-libre-6.16-gnu/arch/mips/configs/decstation_r4k_defconfig
index 58c36720c94a..a476717b8a6a 100644
--- linux-libre-6.15-gnu/arch/mips/configs/decstation_r4k_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/decstation_r4k_defconfig
@@ -163,7 +163,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
diff --git linux-libre-6.15-gnu/arch/mips/configs/gcw0_defconfig linux-libre-6.16-gnu/arch/mips/configs/gcw0_defconfig
index bc1ef66e3999..8b7ad877e07a 100644
--- linux-libre-6.15-gnu/arch/mips/configs/gcw0_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/gcw0_defconfig
@@ -13,7 +13,6 @@ CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BOUNCE is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git linux-libre-6.15-gnu/arch/mips/configs/gpr_defconfig linux-libre-6.16-gnu/arch/mips/configs/gpr_defconfig
index 12f3eed8a946..437ef6dc0b4c 100644
--- linux-libre-6.15-gnu/arch/mips/configs/gpr_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/gpr_defconfig
@@ -84,7 +84,6 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_DCCP=m
 CONFIG_IP_SCTP=m
 CONFIG_TIPC=m
 CONFIG_ATM=y
@@ -273,7 +272,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git linux-libre-6.15-gnu/arch/mips/configs/ip28_defconfig linux-libre-6.16-gnu/arch/mips/configs/ip28_defconfig
index e0040110a3ee..6db21e498faa 100644
--- linux-libre-6.15-gnu/arch/mips/configs/ip28_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/ip28_defconfig
@@ -60,6 +60,5 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_MAGIC_SYSRQ=y
diff --git linux-libre-6.15-gnu/arch/mips/configs/lemote2f_defconfig linux-libre-6.16-gnu/arch/mips/configs/lemote2f_defconfig
index 71d6340497c9..5038a27d035f 100644
--- linux-libre-6.15-gnu/arch/mips/configs/lemote2f_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/lemote2f_defconfig
@@ -297,7 +297,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
diff --git linux-libre-6.15-gnu/arch/mips/configs/mtx1_defconfig linux-libre-6.16-gnu/arch/mips/configs/mtx1_defconfig
index 06b7a0b97eca..e4bcdb64df6c 100644
--- linux-libre-6.15-gnu/arch/mips/configs/mtx1_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/mtx1_defconfig
@@ -130,7 +130,6 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_DCCP=m
 CONFIG_IP_SCTP=m
 CONFIG_TIPC=m
 CONFIG_ATM=y
@@ -662,7 +661,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
diff --git linux-libre-6.15-gnu/arch/mips/configs/rb532_defconfig linux-libre-6.16-gnu/arch/mips/configs/rb532_defconfig
index 42b161d587c7..9fb114ef5e2d 100644
--- linux-libre-6.15-gnu/arch/mips/configs/rb532_defconfig
+++ linux-libre-6.16-gnu/arch/mips/configs/rb532_defconfig
@@ -153,6 +153,6 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_SQUASHFS=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_STRIP_ASM_SYMS=y
diff --git linux-libre-6.15-gnu/arch/mips/crypto/Kconfig linux-libre-6.16-gnu/arch/mips/crypto/Kconfig
index 545fc0e12422..6bf073ae7613 100644
--- linux-libre-6.15-gnu/arch/mips/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/mips/crypto/Kconfig
@@ -2,17 +2,6 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (mips)"
 
-config CRYPTO_POLY1305_MIPS
-	tristate
-	depends on MIPS
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	default CRYPTO_LIB_POLY1305_INTERNAL
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: mips
-
 config CRYPTO_MD5_OCTEON
 	tristate "Digests: MD5 (OCTEON)"
 	depends on CPU_CAVIUM_OCTEON
@@ -33,16 +22,6 @@ config CRYPTO_SHA1_OCTEON
 
 	  Architecture: mips OCTEON
 
-config CRYPTO_SHA256_OCTEON
-	tristate "Hash functions: SHA-224 and SHA-256 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_SHA256
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: mips OCTEON using crypto instructions, when available
-
 config CRYPTO_SHA512_OCTEON
 	tristate "Hash functions: SHA-384 and SHA-512 (OCTEON)"
 	depends on CPU_CAVIUM_OCTEON
@@ -53,16 +32,4 @@ config CRYPTO_SHA512_OCTEON
 
 	  Architecture: mips OCTEON using crypto instructions, when available
 
-config CRYPTO_CHACHA_MIPS
-	tristate
-	depends on CPU_MIPS32_R2
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	default CRYPTO_LIB_CHACHA_INTERNAL
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: MIPS32r2
-
 endmenu
diff --git linux-libre-6.15-gnu/arch/mips/crypto/Makefile linux-libre-6.16-gnu/arch/mips/crypto/Makefile
index fddc88281412..5adb631a69c1 100644
--- linux-libre-6.15-gnu/arch/mips/crypto/Makefile
+++ linux-libre-6.16-gnu/arch/mips/crypto/Makefile
@@ -3,20 +3,3 @@
 # Makefile for MIPS crypto files..
 #
 
-obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
-chacha-mips-y := chacha-core.o chacha-glue.o
-AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
-
-obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
-poly1305-mips-y := poly1305-core.o poly1305-glue.o
-
-perlasm-flavour-$(CONFIG_32BIT) := o32
-perlasm-flavour-$(CONFIG_64BIT) := 64
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
-
-$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
-	$(call if_changed,perlasm)
-
-targets += poly1305-core.S
diff --git linux-libre-6.15-gnu/arch/mips/crypto/chacha-glue.c linux-libre-6.16-gnu/arch/mips/crypto/chacha-glue.c
deleted file mode 100644
index f6fc2e1079a1..000000000000
--- linux-libre-6.15-gnu/arch/mips/crypto/chacha-glue.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * MIPS accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/byteorder.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-asmlinkage void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src,
-				  unsigned int bytes, int nrounds);
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-asmlinkage void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds);
-EXPORT_SYMBOL(hchacha_block_arch);
-
-static int chacha_mips_stream_xor(struct skcipher_request *req,
-				  const struct chacha_ctx *ctx, const u8 *iv)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = round_down(nbytes, walk.stride);
-
-		chacha_crypt(state, walk.dst.virt.addr, walk.src.virt.addr,
-			     nbytes, ctx->nrounds);
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int chacha_mips(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_mips_stream_xor(req, ctx, req->iv);
-}
-
-static int xchacha_mips(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init(state, ctx->key, req->iv);
-
-	hchacha_block(state, subctx.key, ctx->nrounds);
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_mips_stream_xor(req, &subctx, real_iv);
-}
-
-static struct skcipher_alg algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_mips,
-		.decrypt		= chacha_mips,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_mips,
-		.decrypt		= xchacha_mips,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_mips,
-		.decrypt		= xchacha_mips,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ?
-		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER))
-		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (MIPS accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-mips");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-mips");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-mips");
diff --git linux-libre-6.15-gnu/arch/mips/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/mips/crypto/poly1305-glue.c
deleted file mode 100644
index c03ad0bbe69c..000000000000
--- linux-libre-6.15-gnu/arch/mips/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-asmlinkage void poly1305_init_mips(void *state, const u8 *key);
-asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_mips(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int mips_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void mips_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_mips(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	poly1305_blocks_mips(&dctx->h, src, len, hibit);
-}
-
-static int mips_poly1305_update(struct shash_desc *desc, const u8 *src,
-				unsigned int len)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			mips_poly1305_blocks(dctx, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		mips_poly1305_blocks(dctx, src, len, 1);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks_mips(&dctx->h, dctx->buf,
-					     POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		poly1305_blocks_mips(&dctx->h, src, len, 1);
-		src += len;
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks_mips(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit_mips(&dctx->h, dst, dctx->s);
-	*dctx = (struct poly1305_desc_ctx){};
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int mips_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg mips_poly1305_alg = {
-	.init			= mips_poly1305_init,
-	.update			= mips_poly1305_update,
-	.final			= mips_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-mips",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-};
-
-static int __init mips_poly1305_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shash(&mips_poly1305_alg) : 0;
-}
-
-static void __exit mips_poly1305_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shash(&mips_poly1305_alg);
-}
-
-module_init(mips_poly1305_mod_init);
-module_exit(mips_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Poly1305 transform (MIPS accelerated");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-mips");
diff --git linux-libre-6.15-gnu/arch/mips/econet/Kconfig linux-libre-6.16-gnu/arch/mips/econet/Kconfig
new file mode 100644
index 000000000000..fd69884cc9a8
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/econet/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+if ECONET
+
+choice
+	prompt "EcoNet SoC selection"
+	default SOC_ECONET_EN751221
+	help
+	  Select EcoNet MIPS SoC type. Individual SoCs within a family are
+	  very similar, so is it enough to select the right family, and
+	  then customize to the specific SoC using the device tree only.
+
+	config SOC_ECONET_EN751221
+		bool "EN751221 family"
+		select COMMON_CLK
+		select ECONET_EN751221_INTC
+		select IRQ_MIPS_CPU
+		select SMP
+		select SMP_UP
+		select SYS_SUPPORTS_SMP
+		help
+		  The EN751221 family includes EN7512, RN7513, EN7521, EN7526.
+		  They are based on single core MIPS 34Kc processors. To boot
+		  this kernel, you will need a device tree such as
+		  MIPS_RAW_APPENDED_DTB=y, and a root filesystem.
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_ECONET_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_ECONET_NONE
+		bool "None"
+
+	config DTB_ECONET_SMARTFIBER_XP8421_B
+		bool "EN751221 SmartFiber XP8421-B"
+		depends on SOC_ECONET_EN751221
+		select BUILTIN_DTB
+		help
+		  The SmartFiber XP8421-B is a device based on the EN751221 SoC.
+		  It has 512MB of memory and 256MB of NAND flash. This kernel
+		  needs only an appended initramfs to boot. It can be loaded
+		  through XMODEM and booted from memory in the bootloader, or
+		  it can be packed in tclinux.trx format and written to flash.
+endchoice
+
+endif
diff --git linux-libre-6.15-gnu/arch/mips/econet/Makefile linux-libre-6.16-gnu/arch/mips/econet/Makefile
new file mode 100644
index 000000000000..7e4529e7d3d7
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/econet/Makefile
@@ -0,0 +1,2 @@
+
+obj-y := init.o
diff --git linux-libre-6.15-gnu/arch/mips/econet/Platform linux-libre-6.16-gnu/arch/mips/econet/Platform
new file mode 100644
index 000000000000..ea5616447bcd
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/econet/Platform
@@ -0,0 +1,5 @@
+# To address a 7.2MB kernel size limit in the EcoNet SDK bootloader,
+# we put the load address well above where the bootloader loads and then use
+# zboot. So please set CONFIG_ZBOOT_LOAD_ADDRESS to the address where your
+# bootloader actually places the kernel.
+load-$(CONFIG_ECONET)	+= 0xffffffff81000000
diff --git linux-libre-6.15-gnu/arch/mips/econet/init.c linux-libre-6.16-gnu/arch/mips/econet/init.c
new file mode 100644
index 000000000000..6f43ffb209cb
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/econet/init.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EcoNet setup code
+ *
+ * Copyright (C) 2025 Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/irqchip.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/reboot.h>
+
+#define CR_AHB_RSTCR		((void __iomem *)CKSEG1ADDR(0x1fb00040))
+#define RESET			BIT(31)
+
+#define UART_BASE		CKSEG1ADDR(0x1fbf0003)
+#define UART_REG_SHIFT		2
+
+static void hw_reset(char *command)
+{
+	iowrite32(RESET, CR_AHB_RSTCR);
+}
+
+/* 1. Bring up early printk. */
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0);
+	_machine_restart = hw_reset;
+}
+
+/* 2. Parse the DT and find memory */
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	dtb = get_fdt();
+	if (!dtb)
+		panic("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	early_init_dt_scan_memory();
+}
+
+/* 3. Overload __weak device_tree_init(), add SMP_UP ops */
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+
+	register_up_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "EcoNet-EN75xx";
+}
+
+/* 4. Initialize the IRQ subsystem */
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
+
+/* 5. Timers */
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h linux-libre-6.16-gnu/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
index a0d4b752899e..5dbc9b13d15b 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
@@ -12,12 +12,32 @@
 #ifndef _CS5536_PCI_H
 #define _CS5536_PCI_H
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/pci_regs.h>
 
 extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
 extern u32 cs5536_pci_conf_read4(int function, int reg);
 
+extern void pci_ehci_write_reg(int reg, u32 value);
+extern u32 pci_ehci_read_reg(int reg);
+
+extern void pci_ide_write_reg(int reg, u32 value);
+extern u32 pci_ide_read_reg(int reg);
+
+extern void pci_acc_write_reg(int reg, u32 value);
+extern u32 pci_acc_read_reg(int reg);
+
+extern void pci_ohci_write_reg(int reg, u32 value);
+extern u32 pci_ohci_read_reg(int reg);
+
+extern void pci_isa_write_bar(int n, u32 value);
+extern u32 pci_isa_read_bar(int n);
+extern void pci_isa_write_reg(int reg, u32 value);
+extern u32 pci_isa_read_reg(int reg);
+
+extern int __init init_mfgpt_clocksource(void);
+
 #define CS5536_ACC_INTR		9
 #define CS5536_IDE_INTR		14
 #define CS5536_USB_INTR		11
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/mach-loongson2ef/loongson.h linux-libre-6.16-gnu/arch/mips/include/asm/mach-loongson2ef/loongson.h
index ca039b8dcde3..4a098fb10232 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -18,6 +18,9 @@ extern void bonito_irq_init(void);
 extern void mach_prepare_reboot(void);
 extern void mach_prepare_shutdown(void);
 
+/* machine-specific PROM functions */
+extern void __init mach_prom_init_machtype(void);
+
 /* environment arguments from bootloader */
 extern u32 cpu_clock_freq;
 extern u32 memsize, highmemsize;
@@ -45,6 +48,12 @@ extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
 extern int mach_i8259_irq(void);
 
+/* power management functions */
+extern void setup_wakeup_events(void);
+extern int wakeup_loongson(void);
+extern void __weak mach_suspend(void);
+extern void __weak mach_resume(void);
+
 /* We need this in some places... */
 #define delay() ({		\
 	int x;				\
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/pgalloc.h linux-libre-6.16-gnu/arch/mips/include/asm/pgalloc.h
index bbca420c96d3..942af87f1cdd 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/pgalloc.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/pgalloc.h
@@ -62,7 +62,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 	if (!ptdesc)
 		return NULL;
 
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/pgtable.h linux-libre-6.16-gnu/arch/mips/include/asm/pgtable.h
index c29a551eb0ca..ae73ecf4c41a 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/pgtable.h
@@ -504,12 +504,6 @@ static inline int ptep_set_access_flags(struct vm_area_struct *vma,
 	return true;
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 #if defined(CONFIG_XPA)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
@@ -540,7 +534,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #endif
 
 #if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte.pte_low & _PAGE_SWP_EXCLUSIVE;
 }
@@ -557,7 +551,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 	return pte;
 }
 #else
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -719,9 +713,6 @@ static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
 
 #endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
 
-/* Extern to avoid header file madness */
-extern pmd_t mk_pmd(struct page *page, pgprot_t prot);
-
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
 	pmd_val(pmd) = (pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HUGE)) |
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/socket.h linux-libre-6.16-gnu/arch/mips/include/asm/socket.h
index 4724a563c5bf..43a09f0dd3ff 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/socket.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/socket.h
@@ -36,15 +36,6 @@ enum sock_type {
 	SOCK_PACKET	= 10,
 };
 
-#define SOCK_MAX (SOCK_PACKET + 1)
-/* Mask which covers at least up to SOCK_MASK-1.  The
- *  * remaining bits are used as flags. */
-#define SOCK_TYPE_MASK 0xf
-
-/* Flags for socket, socketpair, paccept */
-#define SOCK_CLOEXEC	O_CLOEXEC
-#define SOCK_NONBLOCK	O_NONBLOCK
-
 #define ARCH_HAS_SOCKET_TYPES 1
 
 #endif /* _ASM_SOCKET_H */
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/syscall.h linux-libre-6.16-gnu/arch/mips/include/asm/syscall.h
index 056aa1b713e2..d19e67e2aa6a 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/syscall.h
@@ -41,6 +41,21 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return task_thread_info(task)->syscall;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	/*
+	 * New syscall number has to be assigned to regs[2] because
+	 * it is loaded from there unconditionally after return from
+	 * syscall_trace_enter() invocation.
+	 *
+	 * Consequently, if the syscall was indirect and nr != __NR_syscall,
+	 * then after this assignment the syscall will cease to be indirect.
+	 */
+	task_thread_info(task)->syscall = regs->regs[2] = nr;
+}
+
 static inline void mips_syscall_update_nr(struct task_struct *task,
 					  struct pt_regs *regs)
 {
@@ -74,6 +89,23 @@ static inline void mips_get_syscall_arg(unsigned long *arg,
 #endif
 }
 
+static inline void mips_set_syscall_arg(unsigned long *arg,
+	struct task_struct *task, struct pt_regs *regs, unsigned int n)
+{
+#ifdef CONFIG_32BIT
+	switch (n) {
+	case 0: case 1: case 2: case 3:
+		regs->regs[4 + n] = *arg;
+		return;
+	case 4: case 5: case 6: case 7:
+		*arg = regs->args[n] = *arg;
+		return;
+	}
+#else
+	regs->regs[4 + n] = *arg;
+#endif
+}
+
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
@@ -120,6 +152,17 @@ static inline void syscall_get_arguments(struct task_struct *task,
 		mips_get_syscall_arg(args++, task, regs, i++);
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	unsigned int i = 0;
+	unsigned int n = 6;
+
+	while (n--)
+		mips_set_syscall_arg(args++, task, regs, i++);
+}
+
 extern const unsigned long sys_call_table[];
 extern const unsigned long sys32_call_table[];
 extern const unsigned long sysn32_call_table[];
diff --git linux-libre-6.15-gnu/arch/mips/include/asm/topology.h linux-libre-6.16-gnu/arch/mips/include/asm/topology.h
index 0673d2d0f2e6..5158c802eb65 100644
--- linux-libre-6.15-gnu/arch/mips/include/asm/topology.h
+++ linux-libre-6.16-gnu/arch/mips/include/asm/topology.h
@@ -16,6 +16,9 @@
 #define topology_core_id(cpu)			(cpu_core(&cpu_data[cpu]))
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
 #define topology_sibling_cpumask(cpu)		(&cpu_sibling_map[cpu])
+
+extern struct cpumask __cpu_primary_thread_mask;
+#define cpu_primary_thread_mask ((const struct cpumask *)&__cpu_primary_thread_mask)
 #endif
 
 #endif /* __ASM_TOPOLOGY_H */
diff --git linux-libre-6.15-gnu/arch/mips/include/uapi/asm/socket.h linux-libre-6.16-gnu/arch/mips/include/uapi/asm/socket.h
index 22fa8f19924a..31ac655b7837 100644
--- linux-libre-6.15-gnu/arch/mips/include/uapi/asm/socket.h
+++ linux-libre-6.16-gnu/arch/mips/include/uapi/asm/socket.h
@@ -161,6 +161,8 @@
 
 #define SO_RCVPRIORITY		82
 
+#define SO_PASSRIGHTS		83
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git linux-libre-6.15-gnu/arch/mips/kernel/Makefile linux-libre-6.16-gnu/arch/mips/kernel/Makefile
index ecf3278a32f7..95a1e674fd67 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/mips/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y		+= head.o branch.o cmpxchg.o elf.o entry.o genex.o idle.o irq.o \
 		   process.o prom.o ptrace.o reset.o setup.o signal.o \
diff --git linux-libre-6.15-gnu/arch/mips/kernel/gpio_txx9.c linux-libre-6.16-gnu/arch/mips/kernel/gpio_txx9.c
index 8c083612df9d..027fb57d0d79 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/gpio_txx9.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/gpio_txx9.c
@@ -32,14 +32,16 @@ static void txx9_gpio_set_raw(unsigned int offset, int value)
 	__raw_writel(val, &txx9_pioptr->dout);
 }
 
-static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
-			  int value)
+static int txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			 int value)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	txx9_gpio_set_raw(offset, value);
 	mmiowb();
 	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+
+	return 0;
 }
 
 static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
@@ -68,7 +70,7 @@ static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
 
 static struct gpio_chip txx9_gpio_chip = {
 	.get = txx9_gpio_get,
-	.set = txx9_gpio_set,
+	.set_rv = txx9_gpio_set,
 	.direction_input = txx9_gpio_dir_in,
 	.direction_output = txx9_gpio_dir_out,
 	.label = "TXx9",
diff --git linux-libre-6.15-gnu/arch/mips/kernel/perf_event_mipsxx.c linux-libre-6.16-gnu/arch/mips/kernel/perf_event_mipsxx.c
index c4d6b09136b1..196a070349b0 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/perf_event_mipsxx.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/perf_event_mipsxx.c
@@ -791,8 +791,7 @@ static void handle_associated_event(struct cpu_hw_events *cpuc,
 	if (!mipspmu_event_set_period(event, hwc, idx))
 		return;
 
-	if (perf_event_overflow(event, data, regs))
-		mipsxx_pmu_disable_event(idx);
+	perf_event_overflow(event, data, regs);
 }
 
 
diff --git linux-libre-6.15-gnu/arch/mips/kernel/ptrace.c linux-libre-6.16-gnu/arch/mips/kernel/ptrace.c
index f7107479c7fa..b890d64d352c 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/ptrace.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/ptrace.c
@@ -922,11 +922,13 @@ static const struct pt_regs_offset regoffset_table[] = {
  */
 int regs_query_register_offset(const char *name)
 {
-        const struct pt_regs_offset *roff;
-        for (roff = regoffset_table; roff->name != NULL; roff++)
-                if (!strcmp(roff->name, name))
-                        return roff->offset;
-        return -EINVAL;
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+
+	return -EINVAL;
 }
 
 #if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
@@ -937,7 +939,7 @@ static const struct user_regset mips_regsets[] = {
 		.n		= ELF_NGREG,
 		.size		= sizeof(unsigned int),
 		.align		= sizeof(unsigned int),
-		.regset_get		= gpr32_get,
+		.regset_get	= gpr32_get,
 		.set		= gpr32_set,
 	},
 	[REGSET_DSP] = {
@@ -945,7 +947,7 @@ static const struct user_regset mips_regsets[] = {
 		.n		= NUM_DSP_REGS + 1,
 		.size		= sizeof(u32),
 		.align		= sizeof(u32),
-		.regset_get		= dsp32_get,
+		.regset_get	= dsp32_get,
 		.set		= dsp32_set,
 		.active		= dsp_active,
 	},
@@ -955,7 +957,7 @@ static const struct user_regset mips_regsets[] = {
 		.n		= ELF_NFPREG,
 		.size		= sizeof(elf_fpreg_t),
 		.align		= sizeof(elf_fpreg_t),
-		.regset_get		= fpr_get,
+		.regset_get	= fpr_get,
 		.set		= fpr_set,
 	},
 	[REGSET_FP_MODE] = {
@@ -963,7 +965,7 @@ static const struct user_regset mips_regsets[] = {
 		.n		= 1,
 		.size		= sizeof(int),
 		.align		= sizeof(int),
-		.regset_get		= fp_mode_get,
+		.regset_get	= fp_mode_get,
 		.set		= fp_mode_set,
 	},
 #endif
@@ -973,7 +975,7 @@ static const struct user_regset mips_regsets[] = {
 		.n		= NUM_FPU_REGS + 1,
 		.size		= 16,
 		.align		= 16,
-		.regset_get		= msa_get,
+		.regset_get	= msa_get,
 		.set		= msa_set,
 	},
 #endif
@@ -997,7 +999,7 @@ static const struct user_regset mips64_regsets[] = {
 		.n		= ELF_NGREG,
 		.size		= sizeof(unsigned long),
 		.align		= sizeof(unsigned long),
-		.regset_get		= gpr64_get,
+		.regset_get	= gpr64_get,
 		.set		= gpr64_set,
 	},
 	[REGSET_DSP] = {
@@ -1005,7 +1007,7 @@ static const struct user_regset mips64_regsets[] = {
 		.n		= NUM_DSP_REGS + 1,
 		.size		= sizeof(u64),
 		.align		= sizeof(u64),
-		.regset_get		= dsp64_get,
+		.regset_get	= dsp64_get,
 		.set		= dsp64_set,
 		.active		= dsp_active,
 	},
@@ -1015,7 +1017,7 @@ static const struct user_regset mips64_regsets[] = {
 		.n		= 1,
 		.size		= sizeof(int),
 		.align		= sizeof(int),
-		.regset_get		= fp_mode_get,
+		.regset_get	= fp_mode_get,
 		.set		= fp_mode_set,
 	},
 	[REGSET_FPR] = {
@@ -1023,7 +1025,7 @@ static const struct user_regset mips64_regsets[] = {
 		.n		= ELF_NFPREG,
 		.size		= sizeof(elf_fpreg_t),
 		.align		= sizeof(elf_fpreg_t),
-		.regset_get		= fpr_get,
+		.regset_get	= fpr_get,
 		.set		= fpr_set,
 	},
 #endif
@@ -1033,7 +1035,7 @@ static const struct user_regset mips64_regsets[] = {
 		.n		= NUM_FPU_REGS + 1,
 		.size		= 16,
 		.align		= 16,
-		.regset_get		= msa_get,
+		.regset_get	= msa_get,
 		.set		= msa_set,
 	},
 #endif
@@ -1351,7 +1353,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs)
  */
 asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 {
-        /*
+	/*
 	 * We may come here right after calling schedule_user()
 	 * or do_notify_resume(), in which case we can be in RCU
 	 * user mode.
diff --git linux-libre-6.15-gnu/arch/mips/kernel/smp-cps.c linux-libre-6.16-gnu/arch/mips/kernel/smp-cps.c
index cc26d56f3ab6..7b0e69af4097 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/smp-cps.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/smp-cps.c
@@ -236,6 +236,7 @@ static void __init cps_smp_setup(void)
 			/* Use the number of VPEs in cluster 0 core 0 for smp_num_siblings */
 			if (!cl && !c)
 				smp_num_siblings = core_vpes;
+			cpumask_set_cpu(nvpes, &__cpu_primary_thread_mask);
 
 			for (v = 0; v < min_t(int, core_vpes, NR_CPUS - nvpes); v++) {
 				cpu_set_cluster(&cpu_data[nvpes + v], cl);
@@ -368,6 +369,7 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 	cl = cpu_cluster(&current_cpu_data);
 	c = cpu_core(&current_cpu_data);
 	cluster_bootcfg = &mips_cps_cluster_bootcfg[cl];
+	cpu_smt_set_num_threads(core_vpes, core_vpes);
 	core_bootcfg = &cluster_bootcfg->core_config[c];
 	bitmap_set(cluster_bootcfg->core_power, cpu_core(&current_cpu_data), 1);
 	atomic_set(&core_bootcfg->vpe_mask, 1 << cpu_vpe_id(&current_cpu_data));
diff --git linux-libre-6.15-gnu/arch/mips/kernel/smp.c linux-libre-6.16-gnu/arch/mips/kernel/smp.c
index 39e193cad2b9..4868e79f3b30 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/smp.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/smp.c
@@ -56,8 +56,10 @@ EXPORT_SYMBOL(cpu_sibling_map);
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 static DECLARE_COMPLETION(cpu_starting);
 static DECLARE_COMPLETION(cpu_running);
+#endif
 
 /*
  * A logical cpu mask containing only one VPE per core to
@@ -74,6 +76,8 @@ static cpumask_t cpu_core_setup_map;
 
 cpumask_t cpu_coherent_mask;
 
+struct cpumask __cpu_primary_thread_mask __read_mostly;
+
 unsigned int smp_max_threads __initdata = UINT_MAX;
 
 static int __init early_nosmt(char *s)
@@ -367,6 +371,9 @@ asmlinkage void start_secondary(void)
 	 * to an option instead of something based on .cputype
 	 */
 
+#ifdef CONFIG_HOTPLUG_PARALLEL
+	cpuhp_ap_sync_alive();
+#endif
 	calibrate_delay();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
@@ -376,8 +383,10 @@ asmlinkage void start_secondary(void)
 	cpumask_set_cpu(cpu, &cpu_coherent_mask);
 	notify_cpu_starting(cpu);
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 	/* Notify boot CPU that we're starting & ready to sync counters */
 	complete(&cpu_starting);
+#endif
 
 	synchronise_count_slave(cpu);
 
@@ -386,11 +395,13 @@ asmlinkage void start_secondary(void)
 
 	calculate_cpu_foreign_map();
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 	/*
 	 * Notify boot CPU that we're up & online and it can safely return
 	 * from __cpu_up
 	 */
 	complete(&cpu_running);
+#endif
 
 	/*
 	 * irq will be enabled in ->smp_finish(), enabling it too early
@@ -447,6 +458,12 @@ void __init smp_prepare_boot_cpu(void)
 	set_cpu_online(0, true);
 }
 
+#ifdef CONFIG_HOTPLUG_PARALLEL
+int arch_cpuhp_kick_ap_alive(unsigned int cpu, struct task_struct *tidle)
+{
+	return mp_ops->boot_secondary(cpu, tidle);
+}
+#else
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	int err;
@@ -466,6 +483,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	wait_for_completion(&cpu_running);
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_PROFILING
 /* Not really SMP stuff ... */
diff --git linux-libre-6.15-gnu/arch/mips/kernel/vpe.c linux-libre-6.16-gnu/arch/mips/kernel/vpe.c
index 737d0d4fdcd3..2b67c44adab9 100644
--- linux-libre-6.15-gnu/arch/mips/kernel/vpe.c
+++ linux-libre-6.16-gnu/arch/mips/kernel/vpe.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
+#include <linux/string.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
@@ -582,7 +583,7 @@ static int vpe_elfload(struct vpe *v)
 	struct module mod; /* so we can re-use the relocations code */
 
 	memset(&mod, 0, sizeof(struct module));
-	strcpy(mod.name, "VPE loader");
+	strscpy(mod.name, "VPE loader");
 
 	hdr = (Elf_Ehdr *) v->pbuffer;
 	len = v->plen;
diff --git linux-libre-6.15-gnu/arch/mips/lantiq/irq.c linux-libre-6.16-gnu/arch/mips/lantiq/irq.c
index 8f208007b8e8..a112573b6e37 100644
--- linux-libre-6.15-gnu/arch/mips/lantiq/irq.c
+++ linux-libre-6.16-gnu/arch/mips/lantiq/irq.c
@@ -377,7 +377,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
 
-	ltq_domain = irq_domain_add_linear(node,
+	ltq_domain = irq_domain_create_linear(of_fwnode_handle(node),
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);
 
diff --git linux-libre-6.15-gnu/arch/mips/lib/Makefile linux-libre-6.16-gnu/arch/mips/lib/Makefile
index 9c024e6d5e54..9d75845ef78e 100644
--- linux-libre-6.15-gnu/arch/mips/lib/Makefile
+++ linux-libre-6.16-gnu/arch/mips/lib/Makefile
@@ -3,6 +3,8 @@
 # Makefile for MIPS-specific library files..
 #
 
+obj-y	+= crypto/
+
 lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
 	   mips-atomic.o strncpy_user.o \
 	   strnlen_user.o uncached.o
diff --git linux-libre-6.15-gnu/arch/mips/lib/crc32-mips.c linux-libre-6.16-gnu/arch/mips/lib/crc32-mips.c
index 676a4b3e290b..45e4d2c9fbf5 100644
--- linux-libre-6.15-gnu/arch/mips/lib/crc32-mips.c
+++ linux-libre-6.16-gnu/arch/mips/lib/crc32-mips.c
@@ -62,7 +62,7 @@ do {							\
 #define CRC32C(crc, value, size) \
 	_CRC32(crc, value, size, crc32c)
 
-static DEFINE_STATIC_KEY_FALSE(have_crc32);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_crc32);
 
 u32 crc32_le_arch(u32 crc, const u8 *p, size_t len)
 {
@@ -163,7 +163,7 @@ static int __init crc32_mips_init(void)
 		static_branch_enable(&have_crc32);
 	return 0;
 }
-arch_initcall(crc32_mips_init);
+subsys_initcall(crc32_mips_init);
 
 static void __exit crc32_mips_exit(void)
 {
diff --git linux-libre-6.15-gnu/drivers/misc/echo/Makefile linux-libre-6.16-gnu/arch/mips/lib/crypto/.gitignore
similarity index 57%
rename from drivers/misc/echo/Makefile
rename to arch/mips/lib/crypto/.gitignore
index 5b97467ffb7d..0d47d4f21c6d 100644
--- linux-libre-6.15-gnu/drivers/misc/echo/Makefile
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/.gitignore
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_ECHO) += echo.o
+poly1305-core.S
diff --git linux-libre-6.15-gnu/arch/mips/lib/crypto/Kconfig linux-libre-6.16-gnu/arch/mips/lib/crypto/Kconfig
new file mode 100644
index 000000000000..0670a170c1be
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CRYPTO_CHACHA_MIPS
+	tristate
+	depends on CPU_MIPS32_R2
+	default CRYPTO_LIB_CHACHA
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+
+config CRYPTO_POLY1305_MIPS
+	tristate
+	default CRYPTO_LIB_POLY1305
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
diff --git linux-libre-6.15-gnu/arch/mips/lib/crypto/Makefile linux-libre-6.16-gnu/arch/mips/lib/crypto/Makefile
new file mode 100644
index 000000000000..804488c7aded
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
+chacha-mips-y := chacha-core.o chacha-glue.o
+AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
+
+obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
+poly1305-mips-y := poly1305-core.o poly1305-glue.o
+
+perlasm-flavour-$(CONFIG_32BIT) := o32
+perlasm-flavour-$(CONFIG_64BIT) := 64
+
+quiet_cmd_perlasm = PERLASM $@
+      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
+
+$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
+	$(call if_changed,perlasm)
+
+targets += poly1305-core.S
diff --git linux-libre-6.15-gnu/arch/mips/crypto/chacha-core.S linux-libre-6.16-gnu/arch/mips/lib/crypto/chacha-core.S
similarity index 100%
rename from arch/mips/crypto/chacha-core.S
rename to arch/mips/lib/crypto/chacha-core.S
diff --git linux-libre-6.15-gnu/arch/mips/lib/crypto/chacha-glue.c linux-libre-6.16-gnu/arch/mips/lib/crypto/chacha-glue.c
new file mode 100644
index 000000000000..88c097594eb0
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/chacha-glue.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ChaCha and HChaCha functions (MIPS optimized)
+ *
+ * Copyright (C) 2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <crypto/chacha.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+asmlinkage void chacha_crypt_arch(struct chacha_state *state,
+				  u8 *dst, const u8 *src,
+				  unsigned int bytes, int nrounds);
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+asmlinkage void hchacha_block_arch(const struct chacha_state *state,
+				   u32 out[HCHACHA_OUT_WORDS], int nrounds);
+EXPORT_SYMBOL(hchacha_block_arch);
+
+bool chacha_is_arch_optimized(void)
+{
+	return true;
+}
+EXPORT_SYMBOL(chacha_is_arch_optimized);
+
+MODULE_DESCRIPTION("ChaCha and HChaCha functions (MIPS optimized)");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/mips/lib/crypto/poly1305-glue.c linux-libre-6.16-gnu/arch/mips/lib/crypto/poly1305-glue.c
new file mode 100644
index 000000000000..764a38a65200
--- /dev/null
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/poly1305-glue.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
+ *
+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <crypto/internal/poly1305.h>
+#include <linux/cpufeature.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unaligned.h>
+
+asmlinkage void poly1305_block_init_arch(
+	struct poly1305_block_state *state,
+	const u8 raw_key[POLY1305_BLOCK_SIZE]);
+EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
+asmlinkage void poly1305_blocks_arch(struct poly1305_block_state *state,
+				     const u8 *src, u32 len, u32 hibit);
+EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
+asmlinkage void poly1305_emit_arch(const struct poly1305_state *state,
+				   u8 digest[POLY1305_DIGEST_SIZE],
+				   const u32 nonce[4]);
+EXPORT_SYMBOL_GPL(poly1305_emit_arch);
+
+bool poly1305_is_arch_optimized(void)
+{
+	return true;
+}
+EXPORT_SYMBOL(poly1305_is_arch_optimized);
+
+MODULE_DESCRIPTION("Poly1305 transform (MIPS accelerated");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/mips/crypto/poly1305-mips.pl linux-libre-6.16-gnu/arch/mips/lib/crypto/poly1305-mips.pl
similarity index 98%
rename from arch/mips/crypto/poly1305-mips.pl
rename to arch/mips/lib/crypto/poly1305-mips.pl
index b05bab884ed2..399f10c3e385 100644
--- linux-libre-6.15-gnu/arch/mips/crypto/poly1305-mips.pl
+++ linux-libre-6.16-gnu/arch/mips/lib/crypto/poly1305-mips.pl
@@ -93,9 +93,9 @@ $code.=<<___;
 #endif
 
 #ifdef	__KERNEL__
-# define poly1305_init   poly1305_init_mips
-# define poly1305_blocks poly1305_blocks_mips
-# define poly1305_emit   poly1305_emit_mips
+# define poly1305_init   poly1305_block_init_arch
+# define poly1305_blocks poly1305_blocks_arch
+# define poly1305_emit   poly1305_emit_arch
 #endif
 
 #if defined(__MIPSEB__) && !defined(MIPSEB)
@@ -565,9 +565,9 @@ $code.=<<___;
 #endif
 
 #ifdef	__KERNEL__
-# define poly1305_init   poly1305_init_mips
-# define poly1305_blocks poly1305_blocks_mips
-# define poly1305_emit   poly1305_emit_mips
+# define poly1305_init   poly1305_block_init_arch
+# define poly1305_blocks poly1305_blocks_arch
+# define poly1305_emit   poly1305_emit_arch
 #endif
 
 #if defined(__MIPSEB__) && !defined(MIPSEB)
diff --git linux-libre-6.15-gnu/arch/mips/mm/pgtable-32.c linux-libre-6.16-gnu/arch/mips/mm/pgtable-32.c
index 84dd5136d53a..e2cf2166d5cb 100644
--- linux-libre-6.15-gnu/arch/mips/mm/pgtable-32.c
+++ linux-libre-6.16-gnu/arch/mips/mm/pgtable-32.c
@@ -31,16 +31,6 @@ void pgd_init(void *addr)
 }
 
 #if defined(CONFIG_TRANSPARENT_HUGEPAGE)
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git linux-libre-6.15-gnu/arch/mips/mm/pgtable-64.c linux-libre-6.16-gnu/arch/mips/mm/pgtable-64.c
index 1e544827dea9..b24f865de357 100644
--- linux-libre-6.15-gnu/arch/mips/mm/pgtable-64.c
+++ linux-libre-6.16-gnu/arch/mips/mm/pgtable-64.c
@@ -90,15 +90,6 @@ void pud_init(void *addr)
 #endif
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git linux-libre-6.15-gnu/arch/mips/pci/pci-ar2315.c linux-libre-6.16-gnu/arch/mips/pci/pci-ar2315.c
index a925842ee125..17fa97ec6ffb 100644
--- linux-libre-6.15-gnu/arch/mips/pci/pci-ar2315.c
+++ linux-libre-6.16-gnu/arch/mips/pci/pci-ar2315.c
@@ -469,8 +469,8 @@ static int ar2315_pci_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	apc->domain = irq_domain_add_linear(NULL, AR2315_PCI_IRQ_COUNT,
-					    &ar2315_pci_irq_domain_ops, apc);
+	apc->domain = irq_domain_create_linear(NULL, AR2315_PCI_IRQ_COUNT,
+					       &ar2315_pci_irq_domain_ops, apc);
 	if (!apc->domain) {
 		dev_err(dev, "failed to add IRQ domain\n");
 		return -ENOMEM;
diff --git linux-libre-6.15-gnu/arch/mips/pci/pci-rt3883.c linux-libre-6.16-gnu/arch/mips/pci/pci-rt3883.c
index 4ac68a534e4f..14454ece485d 100644
--- linux-libre-6.15-gnu/arch/mips/pci/pci-rt3883.c
+++ linux-libre-6.16-gnu/arch/mips/pci/pci-rt3883.c
@@ -208,9 +208,10 @@ static int rt3883_pci_irq_init(struct device *dev,
 	rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
 
 	rpc->irq_domain =
-		irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
-				      &rt3883_pci_irq_domain_ops,
-				      rpc);
+		irq_domain_create_linear(of_fwnode_handle(rpc->intc_of_node),
+					 RT3883_PCI_IRQ_COUNT,
+					 &rt3883_pci_irq_domain_ops,
+					 rpc);
 	if (!rpc->irq_domain) {
 		dev_err(dev, "unable to add IRQ domain\n");
 		return -ENODEV;
diff --git linux-libre-6.15-gnu/arch/mips/ralink/irq.c linux-libre-6.16-gnu/arch/mips/ralink/irq.c
index 46aef0a1b22a..af5bbbea949b 100644
--- linux-libre-6.15-gnu/arch/mips/ralink/irq.c
+++ linux-libre-6.16-gnu/arch/mips/ralink/irq.c
@@ -176,7 +176,7 @@ static int __init intc_of_init(struct device_node *node,
 	/* route all INTC interrupts to MIPS HW0 interrupt */
 	rt_intc_w32(0, INTC_REG_TYPE);
 
-	domain = irq_domain_add_legacy(node, RALINK_INTC_IRQ_COUNT,
+	domain = irq_domain_create_legacy(of_fwnode_handle(node), RALINK_INTC_IRQ_COUNT,
 			RALINK_INTC_IRQ_BASE, 0, &irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add irqdomain");
diff --git linux-libre-6.15-gnu/arch/mips/rb532/gpio.c linux-libre-6.16-gnu/arch/mips/rb532/gpio.c
index ea6ebfea4a67..0e47cd59b6cb 100644
--- linux-libre-6.15-gnu/arch/mips/rb532/gpio.c
+++ linux-libre-6.16-gnu/arch/mips/rb532/gpio.c
@@ -105,13 +105,15 @@ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 /*
  * Set output GPIO level
  */
-static void rb532_gpio_set(struct gpio_chip *chip,
-				unsigned offset, int value)
+static int rb532_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
 {
 	struct rb532_gpio_chip	*gpch;
 
 	gpch = gpiochip_get_data(chip);
 	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+	return 0;
 }
 
 /*
@@ -162,7 +164,7 @@ static struct rb532_gpio_chip rb532_gpio_chip[] = {
 			.direction_input	= rb532_gpio_direction_input,
 			.direction_output	= rb532_gpio_direction_output,
 			.get			= rb532_gpio_get,
-			.set			= rb532_gpio_set,
+			.set_rv			= rb532_gpio_set,
 			.to_irq			= rb532_gpio_to_irq,
 			.base			= 0,
 			.ngpio			= 32,
diff --git linux-libre-6.15-gnu/arch/mips/txx9/generic/setup.c linux-libre-6.16-gnu/arch/mips/txx9/generic/setup.c
index 1e67fecd466e..0586ca7668b4 100644
--- linux-libre-6.15-gnu/arch/mips/txx9/generic/setup.c
+++ linux-libre-6.16-gnu/arch/mips/txx9/generic/setup.c
@@ -603,8 +603,8 @@ static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(data->cur_val & (1 << offset));
 }
 
-static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
-			    int value)
+static int txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
 {
 	struct txx9_iocled_data *data = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -616,6 +616,8 @@ static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
 	writeb(data->cur_val, data->mmioaddr);
 	mmiowb();
 	spin_unlock_irqrestore(&txx9_iocled_lock, flags);
+
+	return 0;
 }
 
 static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset)
@@ -653,7 +655,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	if (!iocled->mmioaddr)
 		goto out_free;
 	iocled->chip.get = txx9_iocled_get;
-	iocled->chip.set = txx9_iocled_set;
+	iocled->chip.set_rv = txx9_iocled_set;
 	iocled->chip.direction_input = txx9_iocled_dir_in;
 	iocled->chip.direction_output = txx9_iocled_dir_out;
 	iocled->chip.label = "iocled";
diff --git linux-libre-6.15-gnu/arch/mips/vdso/Makefile linux-libre-6.16-gnu/arch/mips/vdso/Makefile
index fb4c493aaffa..69d4593f64fe 100644
--- linux-libre-6.15-gnu/arch/mips/vdso/Makefile
+++ linux-libre-6.16-gnu/arch/mips/vdso/Makefile
@@ -27,6 +27,7 @@ endif
 # offsets.
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
+	$(filter -std=%,$(KBUILD_CFLAGS)) \
 	-O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
 	-mrelax-pic-calls $(call cc-option, -mexplicit-relocs) \
 	-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
diff --git linux-libre-6.15-gnu/arch/nios2/include/asm/pgtable.h linux-libre-6.16-gnu/arch/nios2/include/asm/pgtable.h
index eab87c6beacb..844dce55569f 100644
--- linux-libre-6.15-gnu/arch/nios2/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/nios2/include/asm/pgtable.h
@@ -217,12 +217,6 @@ static inline void pte_clear(struct mm_struct *mm,
 	set_pte(ptep, null);
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, prot)	(pfn_pte(page_to_pfn(page), prot))
-
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
@@ -265,7 +259,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -291,4 +285,20 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 #define update_mmu_cache(vma, addr, ptep) \
 	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
+static inline int pte_same(pte_t pte_a, pte_t pte_b);
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline int ptep_set_access_flags(struct vm_area_struct *vma,
+					unsigned long address, pte_t *ptep,
+					pte_t entry, int dirty)
+{
+	if (!pte_same(*ptep, entry))
+		set_ptes(vma->vm_mm, address, ptep, entry, 1);
+	/*
+	 * update_mmu_cache will unconditionally execute, handling both
+	 * the case that the PTE changed and the spurious fault case.
+	 */
+	return true;
+}
+
 #endif /* _ASM_NIOS2_PGTABLE_H */
diff --git linux-libre-6.15-gnu/arch/nios2/include/asm/syscall.h linux-libre-6.16-gnu/arch/nios2/include/asm/syscall.h
index fff52205fb65..8e3eb1d689bb 100644
--- linux-libre-6.15-gnu/arch/nios2/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/nios2/include/asm/syscall.h
@@ -15,6 +15,11 @@ static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 	return regs->r2;
 }
 
+static inline void syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	regs->r2 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				struct pt_regs *regs)
 {
@@ -58,6 +63,17 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	*args   = regs->r9;
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, const unsigned long *args)
+{
+	regs->r4 = *args++;
+	regs->r5 = *args++;
+	regs->r6 = *args++;
+	regs->r7 = *args++;
+	regs->r8 = *args++;
+	regs->r9 = *args;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_NIOS2;
diff --git linux-libre-6.15-gnu/arch/nios2/kernel/Makefile linux-libre-6.16-gnu/arch/nios2/kernel/Makefile
index 78a913181fa1..4dce965a7b73 100644
--- linux-libre-6.15-gnu/arch/nios2/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/nios2/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the nios2 linux kernel.
 #
 
-extra-y	+= vmlinux.lds
+always-$(KBUILD_BUILTIN)	+= vmlinux.lds
 
 obj-y	+= head.o
 obj-y	+= cpuinfo.o
diff --git linux-libre-6.15-gnu/arch/nios2/kernel/cpuinfo.c linux-libre-6.16-gnu/arch/nios2/kernel/cpuinfo.c
index 7b1e8f9128e9..55882feb6249 100644
--- linux-libre-6.15-gnu/arch/nios2/kernel/cpuinfo.c
+++ linux-libre-6.16-gnu/arch/nios2/kernel/cpuinfo.c
@@ -46,10 +46,7 @@ void __init setup_cpuinfo(void)
 	cpuinfo.cpu_clock_freq = fcpu(cpu, "clock-frequency");
 
 	str = of_get_property(cpu, "altr,implementation", &len);
-	if (str)
-		strscpy(cpuinfo.cpu_impl, str, sizeof(cpuinfo.cpu_impl));
-	else
-		strcpy(cpuinfo.cpu_impl, "<unknown>");
+	strscpy(cpuinfo.cpu_impl, str ?: "<unknown>");
 
 	cpuinfo.has_div = of_property_read_bool(cpu, "altr,has-div");
 	cpuinfo.has_mul = of_property_read_bool(cpu, "altr,has-mul");
diff --git linux-libre-6.15-gnu/arch/nios2/kernel/irq.c linux-libre-6.16-gnu/arch/nios2/kernel/irq.c
index 8fa280660051..73568d8e21e0 100644
--- linux-libre-6.15-gnu/arch/nios2/kernel/irq.c
+++ linux-libre-6.16-gnu/arch/nios2/kernel/irq.c
@@ -69,7 +69,8 @@ void __init init_IRQ(void)
 
 	BUG_ON(!node);
 
-	domain = irq_domain_add_linear(node, NIOS2_CPU_NR_IRQS, &irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(node),
+					  NIOS2_CPU_NR_IRQS, &irq_ops, NULL);
 	BUG_ON(!domain);
 
 	irq_set_default_domain(domain);
diff --git linux-libre-6.15-gnu/arch/nios2/mm/tlb.c linux-libre-6.16-gnu/arch/nios2/mm/tlb.c
index f90ac35f05f3..a9cbe20f9e79 100644
--- linux-libre-6.15-gnu/arch/nios2/mm/tlb.c
+++ linux-libre-6.16-gnu/arch/nios2/mm/tlb.c
@@ -144,10 +144,11 @@ static void flush_tlb_one(unsigned long addr)
 		if (((pteaddr >> 2) & 0xfffff) != (addr >> PAGE_SHIFT))
 			continue;
 
+		tlbmisc = RDCTL(CTL_TLBMISC);
 		pr_debug("Flush entry by writing way=%dl pid=%ld\n",
-			 way, (pid_misc >> TLBMISC_PID_SHIFT));
+			 way, ((tlbmisc >> TLBMISC_PID_SHIFT) & TLBMISC_PID_MASK));
 
-		tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT);
+		tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) | (tlbmisc & TLBMISC_PID);
 		WRCTL(CTL_TLBMISC, tlbmisc);
 		WRCTL(CTL_PTEADDR, pteaddr_invalid(addr));
 		WRCTL(CTL_TLBACC, 0);
@@ -237,7 +238,8 @@ void flush_tlb_pid(unsigned long mmu_pid)
 			if (pid != mmu_pid)
 				continue;
 
-			tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT);
+			tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) |
+				  (pid << TLBMISC_PID_SHIFT);
 			WRCTL(CTL_TLBMISC, tlbmisc);
 			WRCTL(CTL_TLBACC, 0);
 		}
@@ -272,15 +274,17 @@ void flush_tlb_all(void)
 	/* remember pid/way until we return */
 	get_misc_and_pid(&org_misc, &pid_misc);
 
-	/* Start at way 0, way is auto-incremented after each TLBACC write */
-	WRCTL(CTL_TLBMISC, TLBMISC_WE);
-
 	/* Map each TLB entry to physcal address 0 with no-access and a
 	   bad ptbase */
 	for (line = 0; line < cpuinfo.tlb_num_lines; line++) {
 		WRCTL(CTL_PTEADDR, pteaddr_invalid(addr));
-		for (way = 0; way < cpuinfo.tlb_num_ways; way++)
+		for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+			// Code such as replace_tlb_one_pid assumes that no duplicate entries exist
+			// for a single address across ways, so also use way as a dummy PID
+			WRCTL(CTL_TLBMISC, TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) |
+					   (way << TLBMISC_PID_SHIFT));
 			WRCTL(CTL_TLBACC, 0);
+		}
 
 		addr += PAGE_SIZE;
 	}
diff --git linux-libre-6.15-gnu/arch/openrisc/include/asm/pgtable.h linux-libre-6.16-gnu/arch/openrisc/include/asm/pgtable.h
index 60c6ce7ff2dc..5bd6463bd514 100644
--- linux-libre-6.15-gnu/arch/openrisc/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/openrisc/include/asm/pgtable.h
@@ -299,8 +299,6 @@ static inline pte_t __mk_pte(void *page, pgprot_t pgprot)
 	return pte;
 }
 
-#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot))
-
 #define mk_pte_phys(physpage, pgprot) \
 ({                                                                      \
 	pte_t __pte;                                                    \
@@ -413,7 +411,7 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/openrisc/include/asm/syscall.h linux-libre-6.16-gnu/arch/openrisc/include/asm/syscall.h
index 903ed882bdec..5e037d9659c5 100644
--- linux-libre-6.15-gnu/arch/openrisc/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/openrisc/include/asm/syscall.h
@@ -25,6 +25,12 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 	return regs->orig_gpr11;
 }
 
+static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	regs->orig_gpr11 = nr;
+}
+
 static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
@@ -57,6 +63,13 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	memcpy(args, &regs->gpr[3], 6 * sizeof(args[0]));
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      const unsigned long *args)
+{
+	memcpy(&regs->gpr[3], args, 6 * sizeof(args[0]));
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_OPENRISC;
diff --git linux-libre-6.15-gnu/arch/openrisc/kernel/Makefile linux-libre-6.16-gnu/arch/openrisc/kernel/Makefile
index e4c7d9bdd598..58e6a1b525b7 100644
--- linux-libre-6.15-gnu/arch/openrisc/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/openrisc/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y	:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y	:= head.o setup.o or32_ksyms.o process.o dma.o \
 	   traps.o time.o irq.o entry.o ptrace.o signal.o \
diff --git linux-libre-6.15-gnu/arch/openrisc/mm/ioremap.c linux-libre-6.16-gnu/arch/openrisc/mm/ioremap.c
index 8e63e86251ca..3b352f97fecb 100644
--- linux-libre-6.15-gnu/arch/openrisc/mm/ioremap.c
+++ linux-libre-6.16-gnu/arch/openrisc/mm/ioremap.c
@@ -36,7 +36,7 @@ pte_t __ref *pte_alloc_one_kernel(struct mm_struct *mm)
 	pte_t *pte;
 
 	if (likely(mem_init_done)) {
-		pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
+		pte = __pte_alloc_one_kernel(mm);
 	} else {
 		pte = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 	}
diff --git linux-libre-6.15-gnu/arch/parisc/boot/compressed/Makefile linux-libre-6.16-gnu/arch/parisc/boot/compressed/Makefile
index 92227fa813dc..17c42d718eb3 100644
--- linux-libre-6.15-gnu/arch/parisc/boot/compressed/Makefile
+++ linux-libre-6.16-gnu/arch/parisc/boot/compressed/Makefile
@@ -18,6 +18,7 @@ KBUILD_CFLAGS += -fno-PIE -mno-space-regs -mdisable-fpregs -Os
 ifndef CONFIG_64BIT
 KBUILD_CFLAGS += -mfast-indirect-calls
 endif
+KBUILD_CFLAGS += -std=gnu11
 
 LDFLAGS_vmlinux := -X -e startup --as-needed -T
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(addprefix $(obj)/, $(OBJECTS)) $(LIBGCC) FORCE
diff --git linux-libre-6.15-gnu/arch/parisc/configs/generic-32bit_defconfig linux-libre-6.16-gnu/arch/parisc/configs/generic-32bit_defconfig
index 5b65c9859613..94928d114d4c 100644
--- linux-libre-6.15-gnu/arch/parisc/configs/generic-32bit_defconfig
+++ linux-libre-6.16-gnu/arch/parisc/configs/generic-32bit_defconfig
@@ -251,7 +251,7 @@ CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
diff --git linux-libre-6.15-gnu/arch/parisc/configs/generic-64bit_defconfig linux-libre-6.16-gnu/arch/parisc/configs/generic-64bit_defconfig
index ecc9ffcc11cd..d8cd7f858b2a 100644
--- linux-libre-6.15-gnu/arch/parisc/configs/generic-64bit_defconfig
+++ linux-libre-6.16-gnu/arch/parisc/configs/generic-64bit_defconfig
@@ -283,7 +283,6 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/alternative.h linux-libre-6.16-gnu/arch/parisc/include/asm/alternative.h
index 1eb488f25b83..1601ae4b888d 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/alternative.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/alternative.h
@@ -13,7 +13,7 @@
 #define INSN_PxTLB	0x02		/* modify pdtlb, pitlb */
 #define INSN_NOP	0x08000240	/* nop */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -61,6 +61,6 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,
 	.word (new_instr_ptr - .)	!	\
 	.previous
 
-#endif  /*  __ASSEMBLY__  */
+#endif  /*  __ASSEMBLER__  */
 
 #endif /* __ASM_PARISC_ALTERNATIVE_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/assembly.h linux-libre-6.16-gnu/arch/parisc/include/asm/assembly.h
index 000a28e1c5e8..c20261604f09 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/assembly.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/assembly.h
@@ -53,7 +53,7 @@
 #define SR_TEMP2	2
 #define SR_USER		3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_64BIT
 #define LDREG	ldd
@@ -582,5 +582,5 @@
 	.previous
 
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/barrier.h linux-libre-6.16-gnu/arch/parisc/include/asm/barrier.h
index c705decf2bed..519b1903c5ed 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/barrier.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/barrier.h
@@ -4,7 +4,7 @@
 
 #include <asm/alternative.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* The synchronize caches instruction executes as a nop on systems in
    which all memory references are performed in order. */
@@ -93,5 +93,5 @@ do {									\
 })
 #include <asm-generic/barrier.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* __ASM_BARRIER_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/cache.h linux-libre-6.16-gnu/arch/parisc/include/asm/cache.h
index a3f0f100f219..3f8d3be6ef24 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/cache.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/cache.h
@@ -16,7 +16,7 @@
 #define L1_CACHE_BYTES 16
 #define L1_CACHE_SHIFT 4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
@@ -66,7 +66,7 @@ void parisc_setup_cache_timing(void);
 			ALTERNATIVE(ALT_COND_NO_IOC_FDC, INSN_NOP) :::"memory")
 #define asm_syncdma()	asm volatile("syncdma" :::"memory")
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 /* Classes of processor wrt: disabling space register hashing */
 
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/current.h linux-libre-6.16-gnu/arch/parisc/include/asm/current.h
index dc7aea07c3f3..2814529a4c28 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/current.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/current.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_CURRENT_H
 #define _ASM_PARISC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct task_struct;
 
 static __always_inline struct task_struct *get_current(void)
@@ -16,6 +16,6 @@ static __always_inline struct task_struct *get_current(void)
 
 #define current get_current()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_CURRENT_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/dwarf.h linux-libre-6.16-gnu/arch/parisc/include/asm/dwarf.h
index f4512db86a19..526f4a79262c 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/dwarf.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/dwarf.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_PARISC_DWARF_H
 #define _ASM_PARISC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define CFI_STARTPROC	.cfi_startproc
 #define CFI_ENDPROC	.cfi_endproc
@@ -15,6 +15,6 @@
 #define CFI_REL_OFFSET	.cfi_rel_offset
 #define CFI_UNDEFINED	.cfi_undefined
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_PARISC_DWARF_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/fixmap.h linux-libre-6.16-gnu/arch/parisc/include/asm/fixmap.h
index 5cd80ce1163a..9cafa449c4a7 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/fixmap.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/fixmap.h
@@ -39,7 +39,7 @@
 #define KERNEL_MAP_START	(GATEWAY_PAGE_SIZE)
 #define KERNEL_MAP_END		(FIXMAP_START)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 
 enum fixed_addresses {
@@ -59,6 +59,6 @@ extern void *parisc_vmalloc_start;
 void set_fixmap(enum fixed_addresses idx, phys_addr_t phys);
 void clear_fixmap(enum fixed_addresses idx);
 
-#endif /*__ASSEMBLY__*/
+#endif /*__ASSEMBLER__*/
 
 #endif /*_ASM_FIXMAP_H*/
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/ftrace.h linux-libre-6.16-gnu/arch/parisc/include/asm/ftrace.h
index f1cc1ee3a647..8b89d2b642eb 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/ftrace.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/ftrace.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_FTRACE_H
 #define _ASM_PARISC_FTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void mcount(void);
 
 #define MCOUNT_ADDR		((unsigned long)mcount)
@@ -29,6 +29,6 @@ unsigned long ftrace_call_adjust(unsigned long addr);
 
 #define ftrace_return_address(n) return_address(n)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_FTRACE_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/jump_label.h linux-libre-6.16-gnu/arch/parisc/include/asm/jump_label.h
index 317ebc5edc9f..f325ae3c622f 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/jump_label.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_JUMP_LABEL_H
 #define _ASM_PARISC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/stringify.h>
@@ -44,5 +44,5 @@ l_yes:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/kexec.h linux-libre-6.16-gnu/arch/parisc/include/asm/kexec.h
index 87e174006995..bf31e2d50df9 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/kexec.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/kexec.h
@@ -14,7 +14,7 @@
 #define KEXEC_ARCH KEXEC_ARCH_PARISC
 #define ARCH_HAS_KIMAGE_ARCH
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct kimage_arch {
 	unsigned long initrd_start;
@@ -28,6 +28,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 	/* Dummy implementation for now */
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_KEXEC_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/kgdb.h linux-libre-6.16-gnu/arch/parisc/include/asm/kgdb.h
index 317cd434bee3..9ece98bc6d9d 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/kgdb.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/kgdb.h
@@ -21,7 +21,7 @@
 
 #define CACHE_FLUSH_IS_SAFE		1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void arch_kgdb_breakpoint(void)
 {
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/linkage.h linux-libre-6.16-gnu/arch/parisc/include/asm/linkage.h
index cd6fe4febead..d4cad492b971 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/linkage.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/linkage.h
@@ -15,7 +15,7 @@
  */
 #define ASM_NL	!
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define ENTRY(name) \
 	ALIGN	!\
@@ -35,6 +35,6 @@ name:		ASM_NL\
 	.procend	ASM_NL\
 	ENDPROC(name)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif  /* __ASM_PARISC_LINKAGE_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/page.h linux-libre-6.16-gnu/arch/parisc/include/asm/page.h
index 7fd447092630..8f4e51071ea1 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/page.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/page.h
@@ -8,7 +8,7 @@
 
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/types.h>
 #include <asm/cache.h>
@@ -93,7 +93,7 @@ typedef struct __physmem_range {
 extern physmem_range_t pmem_ranges[];
 extern int npmem_ranges;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* WARNING: The definitions below must match exactly to sizeof(pte_t)
  * etc
@@ -139,7 +139,7 @@ extern int npmem_ranges;
 #define KERNEL_BINARY_TEXT_START	(__PAGE_OFFSET + 0x100000)
 
 /* These macros don't work for 64-bit C code -- don't allow in C at all */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #   define PA(x)	((x)-__PAGE_OFFSET)
 #   define VA(x)	((x)+__PAGE_OFFSET)
 #endif
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/pdc.h linux-libre-6.16-gnu/arch/parisc/include/asm/pdc.h
index 5d2d9737e579..6080a1516b34 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/pdc.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/pdc.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/pdc.h>
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 extern int parisc_narrow_firmware;
 
@@ -109,5 +109,5 @@ static inline char * os_id_to_string(u16 os_id) {
 	}
 }
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 #endif /* _PARISC_PDC_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/pdcpat.h linux-libre-6.16-gnu/arch/parisc/include/asm/pdcpat.h
index 8f160375b865..84ac81b1adde 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/pdcpat.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/pdcpat.h
@@ -210,7 +210,7 @@
 #define PDC_PAT_SYSTEM_INFO	76L
 /* PDC_PAT_SYSTEM_INFO uses the same options as PDC_SYSTEM_INFO function. */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 #ifdef CONFIG_64BIT
@@ -389,6 +389,6 @@ extern int pdc_pat_mem_get_dimm_phys_location(
                 struct pdc_pat_mem_phys_mem_location *pret,
                 unsigned long phys_addr);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* ! __PARISC_PATPDC_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/pgalloc.h linux-libre-6.16-gnu/arch/parisc/include/asm/pgalloc.h
index 2ca74a56415c..3b84ee93edaa 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/pgalloc.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/pgalloc.h
@@ -39,7 +39,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 	ptdesc = pagetable_alloc(gfp, PMD_TABLE_ORDER);
 	if (!ptdesc)
 		return NULL;
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/pgtable.h linux-libre-6.16-gnu/arch/parisc/include/asm/pgtable.h
index babf65751e81..1a86a4370b29 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/pgtable.h
@@ -12,7 +12,7 @@
 
 #include <asm/fixmap.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * we simulate an x86-style page table for the linux mm code
  */
@@ -73,7 +73,7 @@ extern void __update_cache(pte_t pte);
 		mb();				\
 	} while(0)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -226,7 +226,7 @@ extern void __update_cache(pte_t pte);
 #define PxD_FLAG_SHIFT    (4)
 #define PxD_VALUE_SHIFT   (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_USER)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE)
@@ -338,10 +338,6 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; re
 #endif
 
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
 #define __mk_pte(addr,pgprot) \
 ({									\
 	pte_t __pte;							\
@@ -351,8 +347,6 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; re
 	__pte;								\
 })
 
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
 {
 	pte_t pte;
@@ -431,7 +425,7 @@ static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -477,7 +471,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 
 #define pte_same(A,B)	(pte_val(A) == pte_val(B))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 /* TLB page size encoding - see table 3-1 in parisc20.pdf */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/prefetch.h linux-libre-6.16-gnu/arch/parisc/include/asm/prefetch.h
index 6e63f720024d..748eefb27c68 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/prefetch.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/prefetch.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_PARISC_PREFETCH_H
 #define __ASM_PARISC_PREFETCH_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_PREFETCH
 
 #define ARCH_HAS_PREFETCH
@@ -40,6 +40,6 @@ static inline void prefetchw(const void *addr)
 #endif /* CONFIG_PA20 */
 
 #endif /* CONFIG_PREFETCH */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_PARISC_PROCESSOR_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/processor.h linux-libre-6.16-gnu/arch/parisc/include/asm/processor.h
index 77fac02188e1..4c14bde39aac 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/processor.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/processor.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_PARISC_PROCESSOR_H
 #define __ASM_PARISC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/threads.h>
 #include <linux/irqreturn.h>
 
@@ -20,7 +20,7 @@
 #include <asm/ptrace.h>
 #include <asm/types.h>
 #include <asm/percpu.h>
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
 
@@ -45,7 +45,7 @@
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	DEFAULT_TASK_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct rlimit;
 unsigned long mmap_upper_limit(struct rlimit *rlim_stack);
@@ -325,6 +325,6 @@ extern void sba_directed_lmmio(struct parisc_device *, struct resource *);
 extern void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask);
 extern void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_PARISC_PROCESSOR_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/psw.h linux-libre-6.16-gnu/arch/parisc/include/asm/psw.h
index 46921ffcc407..9140e1ab7e63 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/psw.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/psw.h
@@ -60,7 +60,7 @@
 #define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
 #define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* The program status word as bitfields.  */
 struct pa_psw {
@@ -99,6 +99,6 @@ struct pa_psw {
 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
 #endif
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/signal.h linux-libre-6.16-gnu/arch/parisc/include/asm/signal.h
index e84883c6b4c7..85c3d7409bbc 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/signal.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/signal.h
@@ -4,12 +4,12 @@
 
 #include <uapi/asm/signal.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
 #include <asm/sigcontext.h>
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 #endif /* _ASM_PARISC_SIGNAL_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/smp.h linux-libre-6.16-gnu/arch/parisc/include/asm/smp.h
index 94d1f21ce99a..0cf1c3a2696a 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/smp.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/smp.h
@@ -12,7 +12,7 @@ extern int init_per_cpu(int cpuid);
 #define PDC_OS_BOOT_RENDEZVOUS     0x10
 #define PDC_OS_BOOT_RENDEZVOUS_HI  0x28
 
-#ifndef ASSEMBLY
+#ifndef __ASSEMBLER__
 #include <linux/bitops.h>
 #include <linux/threads.h>	/* for NR_CPUS */
 #include <linux/cpumask.h>
@@ -34,7 +34,7 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #define raw_smp_processor_id()		(current_thread_info()->cpu)
 
-#endif /* !ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 #else /* CONFIG_SMP */
 
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/spinlock_types.h linux-libre-6.16-gnu/arch/parisc/include/asm/spinlock_types.h
index 7b986b09dba8..8e6889bc23cc 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/spinlock_types.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/spinlock_types.h
@@ -6,7 +6,7 @@
 
 #define SPINLOCK_BREAK_INSN	0x0000c006	/* break 6,6 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct {
 	volatile unsigned int lock[4];
@@ -26,7 +26,7 @@ typedef struct {
 	volatile unsigned int	counter;
 } arch_rwlock_t;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define __ARCH_RW_LOCK_UNLOCKED__       0x01000000
 #define __ARCH_RW_LOCK_UNLOCKED         { .lock_mutex = __ARCH_SPIN_LOCK_UNLOCKED, \
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/syscall.h linux-libre-6.16-gnu/arch/parisc/include/asm/syscall.h
index 00b127a5e09b..c11222798ab2 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/syscall.h
@@ -17,6 +17,13 @@ static inline long syscall_get_nr(struct task_struct *tsk,
 	return regs->gr[20];
 }
 
+static inline void syscall_set_nr(struct task_struct *tsk,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->gr[20] = nr;
+}
+
 static inline void syscall_get_arguments(struct task_struct *tsk,
 					 struct pt_regs *regs,
 					 unsigned long *args)
@@ -29,6 +36,18 @@ static inline void syscall_get_arguments(struct task_struct *tsk,
 	args[0] = regs->gr[26];
 }
 
+static inline void syscall_set_arguments(struct task_struct *tsk,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	regs->gr[21] = args[5];
+	regs->gr[22] = args[4];
+	regs->gr[23] = args[3];
+	regs->gr[24] = args[2];
+	regs->gr[25] = args[1];
+	regs->gr[26] = args[0];
+}
+
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/thread_info.h linux-libre-6.16-gnu/arch/parisc/include/asm/thread_info.h
index 1a58795f785c..b283738bb6da 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/thread_info.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/thread_info.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_THREAD_INFO_H
 #define _ASM_PARISC_THREAD_INFO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/processor.h>
 #include <asm/special_insns.h>
 
@@ -20,7 +20,7 @@ struct thread_info {
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 /* thread information allocation */
 
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/traps.h linux-libre-6.16-gnu/arch/parisc/include/asm/traps.h
index 0ccdb738a9a3..10c8fb68e404 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/traps.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/traps.h
@@ -4,7 +4,7 @@
 
 #define PARISC_ITLB_TRAP	6 /* defined by architecture. Do not change. */
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 struct pt_regs;
 
 /* traps.c */
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/unistd.h linux-libre-6.16-gnu/arch/parisc/include/asm/unistd.h
index a97c0fd55f91..3e46c6ea9df6 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/unistd.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/unistd.h
@@ -6,7 +6,7 @@
 
 #define __NR_Linux_syscalls	__NR_syscalls
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define SYS_ify(syscall_name)   __NR_##syscall_name
 
@@ -144,7 +144,7 @@
 #define __ARCH_WANT_SYS_UTIME
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #undef STR
 
diff --git linux-libre-6.15-gnu/arch/parisc/include/asm/vdso.h linux-libre-6.16-gnu/arch/parisc/include/asm/vdso.h
index 5f581c1d6460..81bc1d42802a 100644
--- linux-libre-6.15-gnu/arch/parisc/include/asm/vdso.h
+++ linux-libre-6.16-gnu/arch/parisc/include/asm/vdso.h
@@ -2,7 +2,7 @@
 #ifndef __PARISC_VDSO_H__
 #define __PARISC_VDSO_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_64BIT
 #include <generated/vdso64-offsets.h>
@@ -12,7 +12,7 @@
 #define VDSO64_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso64_offset_##name))
 #define VDSO32_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso32_offset_##name))
 
-#endif /* __ASSEMBLY __ */
+#endif /* __ASSEMBLER__ */
 
 /* Default link addresses for the vDSOs */
 #define VDSO_LBASE	0
diff --git linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/pdc.h linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/pdc.h
index fef4f2e96160..65031ddf8372 100644
--- linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/pdc.h
+++ linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/pdc.h
@@ -361,7 +361,7 @@
 /* size of the pdc_result buffer for firmware.c */
 #define NUM_PDC_RESULT	32
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 /* flags for hardware_path */
 #define	PF_AUTOBOOT	0x80
@@ -741,6 +741,6 @@ struct pdc_firm_test_get_rtn_block {   /* PDC_MODEL/PDC_FIRM_TEST_GET */
 #define PIRANHA_CPU_ID		0x13
 #define MAKO_CPU_ID		0x14
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 
 #endif /* _UAPI_PARISC_PDC_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/signal.h linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/signal.h
index 40d7a574c5dd..d99accf37341 100644
--- linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/signal.h
+++ linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/signal.h
@@ -61,7 +61,7 @@
 #define _NSIG_BPW	(sizeof(unsigned long) * 8)
 #define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 #  include <linux/types.h>
 
@@ -80,5 +80,5 @@ typedef struct sigaltstack {
 	__kernel_size_t ss_size;
 } stack_t;
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 #endif /* _UAPI_ASM_PARISC_SIGNAL_H */
diff --git linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/socket.h linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/socket.h
index 96831c988606..1f2d5b7a7f5d 100644
--- linux-libre-6.15-gnu/arch/parisc/include/uapi/asm/socket.h
+++ linux-libre-6.16-gnu/arch/parisc/include/uapi/asm/socket.h
@@ -142,6 +142,8 @@
 #define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
 #define SO_DEVMEM_DONTNEED	0x4050
 
+#define SO_PASSRIGHTS		0x4051
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git linux-libre-6.15-gnu/arch/parisc/kernel/Makefile linux-libre-6.16-gnu/arch/parisc/kernel/Makefile
index 5ab0467be70a..d5055ba33722 100644
--- linux-libre-6.15-gnu/arch/parisc/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/parisc/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for arch/parisc/kernel
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)		:= vmlinux.lds
 
 obj-y		:= head.o cache.o pacache.o setup.o pdt.o traps.o time.o irq.o \
 		   syscall.o entry.o sys_parisc.o firmware.o \
diff --git linux-libre-6.15-gnu/arch/parisc/kernel/unaligned.c linux-libre-6.16-gnu/arch/parisc/kernel/unaligned.c
index f4626943633a..00e97204783e 100644
--- linux-libre-6.15-gnu/arch/parisc/kernel/unaligned.c
+++ linux-libre-6.16-gnu/arch/parisc/kernel/unaligned.c
@@ -25,7 +25,7 @@
 #define DPRINTF(fmt, args...)
 #endif
 
-#define RFMT "%#08lx"
+#define RFMT "0x%08lx"
 
 /* 1111 1100 0000 0000 0001 0011 1100 0000 */
 #define OPCODE1(a,b,c)	((a)<<26|(b)<<12|(c)<<6) 
diff --git linux-libre-6.15-gnu/arch/powerpc/Kconfig linux-libre-6.16-gnu/arch/powerpc/Kconfig
index 6722625a406a..c3e0cc83f120 100644
--- linux-libre-6.15-gnu/arch/powerpc/Kconfig
+++ linux-libre-6.16-gnu/arch/powerpc/Kconfig
@@ -277,6 +277,7 @@ config PPC
 	select HAVE_PERF_EVENTS_NMI		if PPC64
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_RETHOOK			if KPROBES
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE
@@ -894,7 +895,7 @@ config DATA_SHIFT
 	int "Data shift" if DATA_SHIFT_BOOL
 	default 24 if STRICT_KERNEL_RWX && PPC64
 	range 17 28 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
-	range 19 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
+	range 14 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
 	range 20 24 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_85xx
 	default 22 if STRICT_KERNEL_RWX && PPC_BOOK3S_32
 	default 18 if (DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
@@ -907,10 +908,10 @@ config DATA_SHIFT
 	  On Book3S 32 (603+), DBATs are used to map kernel text and rodata RO.
 	  Smaller is the alignment, greater is the number of necessary DBATs.
 
-	  On 8xx, large pages (512kb or 8M) are used to map kernel linear
-	  memory. Aligning to 8M reduces TLB misses as only 8M pages are used
-	  in that case. If PIN_TLB is selected, it must be aligned to 8M as
-	  8M pages will be pinned.
+	  On 8xx, large pages (16kb or 512kb or 8M) are used to map kernel
+	  linear memory. Aligning to 8M reduces TLB misses as only 8M pages
+	  are used in that case. If PIN_TLB is selected, it must be aligned
+	  to 8M as 8M pages will be pinned.
 
 config ARCH_FORCE_MAX_ORDER
 	int "Order of maximal physically contiguous allocations"
diff --git linux-libre-6.15-gnu/arch/powerpc/boot/Makefile linux-libre-6.16-gnu/arch/powerpc/boot/Makefile
index 184d0680e661..a7ab087d412c 100644
--- linux-libre-6.15-gnu/arch/powerpc/boot/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/boot/Makefile
@@ -70,6 +70,7 @@ BOOTCPPFLAGS	:= -nostdinc $(LINUXINCLUDE)
 BOOTCPPFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)
 
 BOOTCFLAGS	:= $(BOOTTARGETFLAGS) \
+		   -std=gnu11 \
 		   -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -O2 \
 		   -msoft-float -mno-altivec -mno-vsx \
diff --git linux-libre-6.15-gnu/arch/powerpc/boot/dts/microwatt.dts linux-libre-6.16-gnu/arch/powerpc/boot/dts/microwatt.dts
index c4e4d2a9b460..b7eac4e56019 100644
--- linux-libre-6.15-gnu/arch/powerpc/boot/dts/microwatt.dts
+++ linux-libre-6.16-gnu/arch/powerpc/boot/dts/microwatt.dts
@@ -4,7 +4,7 @@
 / {
 	#size-cells = <0x02>;
 	#address-cells = <0x02>;
-	model-name = "microwatt";
+	model = "microwatt";
 	compatible = "microwatt-soc";
 
 	aliases {
diff --git linux-libre-6.15-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts linux-libre-6.16-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts
index e09b37d7489d..a89cb3139ca8 100644
--- linux-libre-6.15-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ linux-libre-6.16-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -6,6 +6,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "fsl,mpc8315erdb";
@@ -358,6 +359,15 @@
 			interrupt-parent = <&ipic>;
 			fsl,mpc8313-wakeup-timer = <&gtm1>;
 		};
+
+		gpio: gpio-controller@c00 {
+			compatible = "fsl,mpc8314-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	pci0: pci@e0008500 {
diff --git linux-libre-6.15-gnu/arch/powerpc/boot/rs6000.h linux-libre-6.16-gnu/arch/powerpc/boot/rs6000.h
index a9d879155ef9..16df8f3c43f1 100644
--- linux-libre-6.15-gnu/arch/powerpc/boot/rs6000.h
+++ linux-libre-6.16-gnu/arch/powerpc/boot/rs6000.h
@@ -1,11 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /* IBM RS/6000 "XCOFF" file definitions for BFD.
    Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-   FIXME: Can someone provide a transliteration of this name into ASCII?
-   Using the following chars caused a compiler warning on HIUX (so I replaced
-   them with octal escapes), and isn't useful without an understanding of what
-   character set it is.
-   Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM
+   Written by Mimi Phuong-Thao Vo of IBM
    and John Gilmore of Cygnus Support.  */
 
 /********************** FILE HEADER **********************/
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/g5_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/g5_defconfig
index 7e58f3e6c987..428f17b45513 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/g5_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/g5_defconfig
@@ -235,7 +235,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/pmac32_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/pmac32_defconfig
index 1bc3466bc909..ae45f70b29f0 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/pmac32_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/pmac32_defconfig
@@ -87,7 +87,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_DCCP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/powernv_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/powernv_defconfig
index 6b6d7467fecf..379229c982a4 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/powernv_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/powernv_defconfig
@@ -317,7 +317,7 @@ CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5_PPC=m
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/ppc64_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/ppc64_defconfig
index 5fa154185efa..3423c405cad4 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/ppc64_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/ppc64_defconfig
@@ -377,7 +377,7 @@ CONFIG_IMA_WRITE_POLICY=y
 CONFIG_IMA_APPRAISE=y
 CONFIG_IMA_ARCH_POLICY=y
 CONFIG_IMA_APPRAISE_MODSIG=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_SERPENT=m
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/ppc64e_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/ppc64e_defconfig
index d2e659a2d8cb..90247b2a0ab0 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/ppc64e_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/ppc64e_defconfig
@@ -220,7 +220,7 @@ CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_PCBC=m
diff --git linux-libre-6.15-gnu/arch/powerpc/configs/ppc6xx_defconfig linux-libre-6.16-gnu/arch/powerpc/configs/ppc6xx_defconfig
index a91a766b71a4..f96f8ed9856c 100644
--- linux-libre-6.15-gnu/arch/powerpc/configs/ppc6xx_defconfig
+++ linux-libre-6.16-gnu/arch/powerpc/configs/ppc6xx_defconfig
@@ -225,7 +225,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
 CONFIG_TIPC=m
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
@@ -1073,7 +1072,7 @@ CONFIG_SECURITY_NETWORK_XFRM=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/Kconfig linux-libre-6.16-gnu/arch/powerpc/crypto/Kconfig
index 370db8192ce6..caaa359f4742 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/Kconfig
@@ -17,7 +17,6 @@ config CRYPTO_CURVE25519_PPC64
 
 config CRYPTO_MD5_PPC
 	tristate "Digests: MD5"
-	depends on PPC
 	select CRYPTO_HASH
 	help
 	  MD5 message digest algorithm (RFC1321)
@@ -26,7 +25,6 @@ config CRYPTO_MD5_PPC
 
 config CRYPTO_SHA1_PPC
 	tristate "Hash functions: SHA-1"
-	depends on PPC
 	help
 	  SHA-1 secure hash algorithm (FIPS 180)
 
@@ -34,27 +32,16 @@ config CRYPTO_SHA1_PPC
 
 config CRYPTO_SHA1_PPC_SPE
 	tristate "Hash functions: SHA-1 (SPE)"
-	depends on PPC && SPE
+	depends on SPE
 	help
 	  SHA-1 secure hash algorithm (FIPS 180)
 
 	  Architecture: powerpc using
 	  - SPE (Signal Processing Engine) extensions
 
-config CRYPTO_SHA256_PPC_SPE
-	tristate "Hash functions: SHA-224 and SHA-256 (SPE)"
-	depends on PPC && SPE
-	select CRYPTO_SHA256
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: powerpc using
-	  - SPE (Signal Processing Engine) extensions
-
 config CRYPTO_AES_PPC_SPE
 	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (SPE)"
-	depends on PPC && SPE
+	depends on SPE
 	select CRYPTO_SKCIPHER
 	help
 	  Block ciphers: AES cipher algorithms (FIPS-197)
@@ -92,33 +79,6 @@ config CRYPTO_AES_GCM_P10
 	  Support for cryptographic acceleration instructions on Power10 or
 	  later CPU. This module supports stitched acceleration for AES/GCM.
 
-config CRYPTO_CHACHA20_P10
-	tristate
-	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
-	select CRYPTO_SKCIPHER
-	select CRYPTO_LIB_CHACHA_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	default CRYPTO_LIB_CHACHA_INTERNAL
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: PowerPC64
-	  - Power10 or later
-	  - Little-endian
-
-config CRYPTO_POLY1305_P10
-	tristate "Hash functions: Poly1305 (P10 or later)"
-	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
-	select CRYPTO_HASH
-	select CRYPTO_LIB_POLY1305_GENERIC
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: PowerPC64
-	  - Power10 or later
-	  - Little-endian
-
 config CRYPTO_DEV_VMX
         bool "Support for VMX cryptographic acceleration instructions"
         depends on PPC64 && VSX
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/Makefile linux-libre-6.16-gnu/arch/powerpc/crypto/Makefile
index 2f00b22b0823..8c2936ae466f 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/Makefile
@@ -9,10 +9,7 @@ obj-$(CONFIG_CRYPTO_AES_PPC_SPE) += aes-ppc-spe.o
 obj-$(CONFIG_CRYPTO_MD5_PPC) += md5-ppc.o
 obj-$(CONFIG_CRYPTO_SHA1_PPC) += sha1-powerpc.o
 obj-$(CONFIG_CRYPTO_SHA1_PPC_SPE) += sha1-ppc-spe.o
-obj-$(CONFIG_CRYPTO_SHA256_PPC_SPE) += sha256-ppc-spe.o
 obj-$(CONFIG_CRYPTO_AES_GCM_P10) += aes-gcm-p10-crypto.o
-obj-$(CONFIG_CRYPTO_CHACHA20_P10) += chacha-p10-crypto.o
-obj-$(CONFIG_CRYPTO_POLY1305_P10) += poly1305-p10-crypto.o
 obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
 obj-$(CONFIG_CRYPTO_CURVE25519_PPC64) += curve25519-ppc64le.o
 
@@ -20,10 +17,7 @@ aes-ppc-spe-y := aes-spe-core.o aes-spe-keys.o aes-tab-4k.o aes-spe-modes.o aes-
 md5-ppc-y := md5-asm.o md5-glue.o
 sha1-powerpc-y := sha1-powerpc-asm.o sha1.o
 sha1-ppc-spe-y := sha1-spe-asm.o sha1-spe-glue.o
-sha256-ppc-spe-y := sha256-spe-asm.o sha256-spe-glue.o
 aes-gcm-p10-crypto-y := aes-gcm-p10-glue.o aes-gcm-p10.o ghashp10-ppc.o aesp10-ppc.o
-chacha-p10-crypto-y := chacha-p10-glue.o chacha-p10le-8x.o
-poly1305-p10-crypto-y := poly1305-p10-glue.o poly1305-p10le_64.o
 vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
 curve25519-ppc64le-y := curve25519-ppc64le-core.o curve25519-ppc64le_asm.o
 
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/aes.c linux-libre-6.16-gnu/arch/powerpc/crypto/aes.c
index ec06189fbf99..3f1e5e894902 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/aes.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/aes.c
@@ -7,15 +7,15 @@
  * Author: Marcelo Henrique Cerri <mhcerri@br.ibm.com>
  */
 
-#include <linux/types.h>
-#include <linux/err.h>
-#include <linux/crypto.h>
-#include <linux/delay.h>
 #include <asm/simd.h>
 #include <asm/switch_to.h>
 #include <crypto/aes.h>
 #include <crypto/internal/cipher.h>
 #include <crypto/internal/simd.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include "aesp8-ppc.h"
 
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/aes_cbc.c linux-libre-6.16-gnu/arch/powerpc/crypto/aes_cbc.c
index ed0debc7acb5..5f2a4f375eef 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/aes_cbc.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/aes_cbc.c
@@ -12,6 +12,10 @@
 #include <crypto/aes.h>
 #include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include "aesp8-ppc.h"
 
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/aes_ctr.c linux-libre-6.16-gnu/arch/powerpc/crypto/aes_ctr.c
index 3da75f42529a..e27c4036e711 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/aes_ctr.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/aes_ctr.c
@@ -12,6 +12,10 @@
 #include <crypto/aes.h>
 #include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include "aesp8-ppc.h"
 
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/aes_xts.c linux-libre-6.16-gnu/arch/powerpc/crypto/aes_xts.c
index dabbccb41550..9440e771cede 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/aes_xts.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/aes_xts.c
@@ -13,6 +13,10 @@
 #include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/xts.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include "aesp8-ppc.h"
 
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/chacha-p10-glue.c linux-libre-6.16-gnu/arch/powerpc/crypto/chacha-p10-glue.c
deleted file mode 100644
index d8796decc1fb..000000000000
--- linux-libre-6.15-gnu/arch/powerpc/crypto/chacha-p10-glue.c
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PowerPC P10 (ppc64le) accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright 2023- IBM Corp. All rights reserved.
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/cpufeature.h>
-#include <linux/sizes.h>
-#include <asm/simd.h>
-#include <asm/switch_to.h>
-
-asmlinkage void chacha_p10le_8x(u32 *state, u8 *dst, const u8 *src,
-				unsigned int len, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_p10);
-
-static void vsx_begin(void)
-{
-	preempt_disable();
-	enable_kernel_vsx();
-}
-
-static void vsx_end(void)
-{
-	disable_kernel_vsx();
-	preempt_enable();
-}
-
-static void chacha_p10_do_8x(u32 *state, u8 *dst, const u8 *src,
-			     unsigned int bytes, int nrounds)
-{
-	unsigned int l = bytes & ~0x0FF;
-
-	if (l > 0) {
-		chacha_p10le_8x(state, dst, src, l, nrounds);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += l / CHACHA_BLOCK_SIZE;
-	}
-
-	if (bytes > 0)
-		chacha_crypt_generic(state, dst, src, bytes, nrounds);
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	hchacha_block_generic(state, stream, nrounds);
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!static_branch_likely(&have_p10) || bytes <= CHACHA_BLOCK_SIZE ||
-	    !crypto_simd_usable())
-		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		vsx_begin();
-		chacha_p10_do_8x(state, dst, src, todo, nrounds);
-		vsx_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_p10_stream_xor(struct skcipher_request *req,
-				 const struct chacha_ctx *ctx, const u8 *iv)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-	if (err)
-		return err;
-
-	chacha_init(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = rounddown(nbytes, walk.stride);
-
-		if (!crypto_simd_usable()) {
-			chacha_crypt_generic(state, walk.dst.virt.addr,
-					     walk.src.virt.addr, nbytes,
-					     ctx->nrounds);
-		} else {
-			vsx_begin();
-			chacha_p10_do_8x(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			vsx_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-		if (err)
-			break;
-	}
-
-	return err;
-}
-
-static int chacha_p10(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_p10_stream_xor(req, ctx, req->iv);
-}
-
-static int xchacha_p10(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init(state, ctx->key, req->iv);
-	hchacha_block_arch(state, subctx.key, ctx->nrounds);
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_p10_stream_xor(req, &subctx, real_iv);
-}
-
-static struct skcipher_alg algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-p10",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_p10,
-		.decrypt		= chacha_p10,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-p10",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_p10,
-		.decrypt		= xchacha_p10,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-p10",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_p10,
-		.decrypt		= xchacha_p10,
-	}
-};
-
-static int __init chacha_p10_init(void)
-{
-	if (!cpu_has_feature(CPU_FTR_ARCH_31))
-		return 0;
-
-	static_branch_enable(&have_p10);
-
-	return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit chacha_p10_exit(void)
-{
-	if (!static_branch_likely(&have_p10))
-		return;
-
-	crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-module_init(chacha_p10_init);
-module_exit(chacha_p10_exit);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (P10 accelerated)");
-MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-p10");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-p10");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-p10");
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/ghash.c linux-libre-6.16-gnu/arch/powerpc/crypto/ghash.c
index 77eca20bc7ac..7308735bdb33 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/ghash.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/ghash.c
@@ -11,19 +11,18 @@
  *   Copyright (C) 2014 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
  */
 
-#include <linux/types.h>
-#include <linux/err.h>
-#include <linux/crypto.h>
-#include <linux/delay.h>
-#include <asm/simd.h>
+#include "aesp8-ppc.h"
 #include <asm/switch_to.h>
 #include <crypto/aes.h>
+#include <crypto/gf128mul.h>
 #include <crypto/ghash.h>
-#include <crypto/scatterwalk.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
-#include <crypto/b128ops.h>
-#include "aesp8-ppc.h"
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
 
 void gcm_init_p8(u128 htable[16], const u64 Xi[2]);
 void gcm_gmult_p8(u64 Xi[2], const u128 htable[16]);
@@ -39,15 +38,12 @@ struct p8_ghash_ctx {
 
 struct p8_ghash_desc_ctx {
 	u64 shash[2];
-	u8 buffer[GHASH_DIGEST_SIZE];
-	int bytes;
 };
 
 static int p8_ghash_init(struct shash_desc *desc)
 {
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
-	dctx->bytes = 0;
 	memset(dctx->shash, 0, GHASH_DIGEST_SIZE);
 	return 0;
 }
@@ -74,27 +70,30 @@ static int p8_ghash_setkey(struct crypto_shash *tfm, const u8 *key,
 }
 
 static inline void __ghash_block(struct p8_ghash_ctx *ctx,
-				 struct p8_ghash_desc_ctx *dctx)
+				 struct p8_ghash_desc_ctx *dctx,
+				 const u8 *src)
 {
 	if (crypto_simd_usable()) {
 		preempt_disable();
 		pagefault_disable();
 		enable_kernel_vsx();
-		gcm_ghash_p8(dctx->shash, ctx->htable,
-				dctx->buffer, GHASH_DIGEST_SIZE);
+		gcm_ghash_p8(dctx->shash, ctx->htable, src, GHASH_BLOCK_SIZE);
 		disable_kernel_vsx();
 		pagefault_enable();
 		preempt_enable();
 	} else {
-		crypto_xor((u8 *)dctx->shash, dctx->buffer, GHASH_BLOCK_SIZE);
+		crypto_xor((u8 *)dctx->shash, src, GHASH_BLOCK_SIZE);
 		gf128mul_lle((be128 *)dctx->shash, &ctx->key);
 	}
 }
 
-static inline void __ghash_blocks(struct p8_ghash_ctx *ctx,
-				  struct p8_ghash_desc_ctx *dctx,
-				  const u8 *src, unsigned int srclen)
+static inline int __ghash_blocks(struct p8_ghash_ctx *ctx,
+				 struct p8_ghash_desc_ctx *dctx,
+				 const u8 *src, unsigned int srclen)
 {
+	int remain = srclen - round_down(srclen, GHASH_BLOCK_SIZE);
+
+	srclen -= remain;
 	if (crypto_simd_usable()) {
 		preempt_disable();
 		pagefault_disable();
@@ -105,62 +104,38 @@ static inline void __ghash_blocks(struct p8_ghash_ctx *ctx,
 		pagefault_enable();
 		preempt_enable();
 	} else {
-		while (srclen >= GHASH_BLOCK_SIZE) {
+		do {
 			crypto_xor((u8 *)dctx->shash, src, GHASH_BLOCK_SIZE);
 			gf128mul_lle((be128 *)dctx->shash, &ctx->key);
 			srclen -= GHASH_BLOCK_SIZE;
 			src += GHASH_BLOCK_SIZE;
-		}
+		} while (srclen);
 	}
+
+	return remain;
 }
 
 static int p8_ghash_update(struct shash_desc *desc,
 			   const u8 *src, unsigned int srclen)
 {
-	unsigned int len;
 	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
-	if (dctx->bytes) {
-		if (dctx->bytes + srclen < GHASH_DIGEST_SIZE) {
-			memcpy(dctx->buffer + dctx->bytes, src,
-				srclen);
-			dctx->bytes += srclen;
-			return 0;
-		}
-		memcpy(dctx->buffer + dctx->bytes, src,
-			GHASH_DIGEST_SIZE - dctx->bytes);
-
-		__ghash_block(ctx, dctx);
-
-		src += GHASH_DIGEST_SIZE - dctx->bytes;
-		srclen -= GHASH_DIGEST_SIZE - dctx->bytes;
-		dctx->bytes = 0;
-	}
-	len = srclen & ~(GHASH_DIGEST_SIZE - 1);
-	if (len) {
-		__ghash_blocks(ctx, dctx, src, len);
-		src += len;
-		srclen -= len;
-	}
-	if (srclen) {
-		memcpy(dctx->buffer, src, srclen);
-		dctx->bytes = srclen;
-	}
-	return 0;
+	return __ghash_blocks(ctx, dctx, src, srclen);
 }
 
-static int p8_ghash_final(struct shash_desc *desc, u8 *out)
+static int p8_ghash_finup(struct shash_desc *desc, const u8 *src,
+			  unsigned int len, u8 *out)
 {
-	int i;
 	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
-	if (dctx->bytes) {
-		for (i = dctx->bytes; i < GHASH_DIGEST_SIZE; i++)
-			dctx->buffer[i] = 0;
-		__ghash_block(ctx, dctx);
-		dctx->bytes = 0;
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
+
+		memcpy(buf, src, len);
+		__ghash_block(ctx, dctx, buf);
+		memzero_explicit(buf, sizeof(buf));
 	}
 	memcpy(out, dctx->shash, GHASH_DIGEST_SIZE);
 	return 0;
@@ -170,14 +145,14 @@ struct shash_alg p8_ghash_alg = {
 	.digestsize = GHASH_DIGEST_SIZE,
 	.init = p8_ghash_init,
 	.update = p8_ghash_update,
-	.final = p8_ghash_final,
+	.finup = p8_ghash_finup,
 	.setkey = p8_ghash_setkey,
-	.descsize = sizeof(struct p8_ghash_desc_ctx)
-		+ sizeof(struct ghash_desc_ctx),
+	.descsize = sizeof(struct p8_ghash_desc_ctx),
 	.base = {
 		 .cra_name = "ghash",
 		 .cra_driver_name = "p8_ghash",
 		 .cra_priority = 1000,
+		 .cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		 .cra_blocksize = GHASH_BLOCK_SIZE,
 		 .cra_ctxsize = sizeof(struct p8_ghash_ctx),
 		 .cra_module = THIS_MODULE,
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/md5-glue.c linux-libre-6.16-gnu/arch/powerpc/crypto/md5-glue.c
index c24f605033bd..204440a90cd8 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/md5-glue.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/md5-glue.c
@@ -8,25 +8,13 @@
  */
 
 #include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
 #include <crypto/md5.h>
-#include <asm/byteorder.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
 
 extern void ppc_md5_transform(u32 *state, const u8 *src, u32 blocks);
 
-static inline void ppc_md5_clear_context(struct md5_state *sctx)
-{
-	int count = sizeof(struct md5_state) >> 2;
-	u32 *ptr = (u32 *)sctx;
-
-	/* make sure we can clear the fast way */
-	BUILD_BUG_ON(sizeof(struct md5_state) % 4);
-	do { *ptr++ = 0; } while (--count);
-}
-
 static int ppc_md5_init(struct shash_desc *desc)
 {
 	struct md5_state *sctx = shash_desc_ctx(desc);
@@ -44,79 +32,34 @@ static int ppc_md5_update(struct shash_desc *desc, const u8 *data,
 			unsigned int len)
 {
 	struct md5_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->byte_count & 0x3f;
-	unsigned int avail = 64 - offset;
-	const u8 *src = data;
 
-	sctx->byte_count += len;
-
-	if (avail > len) {
-		memcpy((char *)sctx->block + offset, src, len);
-		return 0;
-	}
-
-	if (offset) {
-		memcpy((char *)sctx->block + offset, src, avail);
-		ppc_md5_transform(sctx->hash, (const u8 *)sctx->block, 1);
-		len -= avail;
-		src += avail;
-	}
-
-	if (len > 63) {
-		ppc_md5_transform(sctx->hash, src, len >> 6);
-		src += len & ~0x3f;
-		len &= 0x3f;
-	}
-
-	memcpy((char *)sctx->block, src, len);
-	return 0;
+	sctx->byte_count += round_down(len, MD5_HMAC_BLOCK_SIZE);
+	ppc_md5_transform(sctx->hash, data, len >> 6);
+	return len - round_down(len, MD5_HMAC_BLOCK_SIZE);
 }
 
-static int ppc_md5_final(struct shash_desc *desc, u8 *out)
+static int ppc_md5_finup(struct shash_desc *desc, const u8 *src,
+			 unsigned int offset, u8 *out)
 {
 	struct md5_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->byte_count & 0x3f;
-	const u8 *src = (const u8 *)sctx->block;
-	u8 *p = (u8 *)src + offset;
-	int padlen = 55 - offset;
-	__le64 *pbits = (__le64 *)((char *)sctx->block + 56);
+	__le64 block[MD5_BLOCK_WORDS] = {};
+	u8 *p = memcpy(block, src, offset);
 	__le32 *dst = (__le32 *)out;
+	__le64 *pbits;
 
+	src = p;
+	p += offset;
 	*p++ = 0x80;
-
-	if (padlen < 0) {
-		memset(p, 0x00, padlen + sizeof (u64));
-		ppc_md5_transform(sctx->hash, src, 1);
-		p = (char *)sctx->block;
-		padlen = 56;
-	}
-
-	memset(p, 0, padlen);
+	sctx->byte_count += offset;
+	pbits = &block[(MD5_BLOCK_WORDS / (offset > 55 ? 1 : 2)) - 1];
 	*pbits = cpu_to_le64(sctx->byte_count << 3);
-	ppc_md5_transform(sctx->hash, src, 1);
+	ppc_md5_transform(sctx->hash, src, (pbits - block + 1) / 8);
+	memzero_explicit(block, sizeof(block));
 
 	dst[0] = cpu_to_le32(sctx->hash[0]);
 	dst[1] = cpu_to_le32(sctx->hash[1]);
 	dst[2] = cpu_to_le32(sctx->hash[2]);
 	dst[3] = cpu_to_le32(sctx->hash[3]);
-
-	ppc_md5_clear_context(sctx);
-	return 0;
-}
-
-static int ppc_md5_export(struct shash_desc *desc, void *out)
-{
-	struct md5_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int ppc_md5_import(struct shash_desc *desc, const void *in)
-{
-	struct md5_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
 	return 0;
 }
 
@@ -124,15 +67,13 @@ static struct shash_alg alg = {
 	.digestsize	=	MD5_DIGEST_SIZE,
 	.init		=	ppc_md5_init,
 	.update		=	ppc_md5_update,
-	.final		=	ppc_md5_final,
-	.export		=	ppc_md5_export,
-	.import		=	ppc_md5_import,
-	.descsize	=	sizeof(struct md5_state),
-	.statesize	=	sizeof(struct md5_state),
+	.finup		=	ppc_md5_finup,
+	.descsize	=	MD5_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"md5",
 		.cra_driver_name=	"md5-ppc",
 		.cra_priority	=	200,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/poly1305-p10-glue.c linux-libre-6.16-gnu/arch/powerpc/crypto/poly1305-p10-glue.c
deleted file mode 100644
index 369686e9370b..000000000000
--- linux-libre-6.15-gnu/arch/powerpc/crypto/poly1305-p10-glue.c
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Poly1305 authenticator algorithm, RFC7539.
- *
- * Copyright 2023- IBM Corp. All rights reserved.
- */
-
-#include <crypto/algapi.h>
-#include <linux/crypto.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/jump_label.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/unaligned.h>
-#include <asm/simd.h>
-#include <asm/switch_to.h>
-
-asmlinkage void poly1305_p10le_4blocks(void *h, const u8 *m, u32 mlen);
-asmlinkage void poly1305_64s(void *h, const u8 *m, u32 mlen, int highbit);
-asmlinkage void poly1305_emit_64(void *h, void *s, u8 *dst);
-
-static void vsx_begin(void)
-{
-	preempt_disable();
-	enable_kernel_vsx();
-}
-
-static void vsx_end(void)
-{
-	disable_kernel_vsx();
-	preempt_enable();
-}
-
-static int crypto_poly1305_p10_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	poly1305_core_init(&dctx->h);
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static unsigned int crypto_poly1305_setdctxkey(struct poly1305_desc_ctx *dctx,
-					       const u8 *inp, unsigned int len)
-{
-	unsigned int acc = 0;
-
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset && len >= POLY1305_BLOCK_SIZE) {
-			struct poly1305_core_key *key = &dctx->core_r;
-
-			key->key.r64[0] = get_unaligned_le64(&inp[0]);
-			key->key.r64[1] = get_unaligned_le64(&inp[8]);
-			inp += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			acc += POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(&inp[0]);
-			dctx->s[1] = get_unaligned_le32(&inp[4]);
-			dctx->s[2] = get_unaligned_le32(&inp[8]);
-			dctx->s[3] = get_unaligned_le32(&inp[12]);
-			acc += POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-	}
-	return acc;
-}
-
-static int crypto_poly1305_p10_update(struct shash_desc *desc,
-				      const u8 *src, unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-	unsigned int bytes, used;
-
-	if (unlikely(dctx->buflen)) {
-		bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen);
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		srclen -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			if (likely(!crypto_poly1305_setdctxkey(dctx, dctx->buf,
-							       POLY1305_BLOCK_SIZE))) {
-				vsx_begin();
-				poly1305_64s(&dctx->h, dctx->buf,
-						  POLY1305_BLOCK_SIZE, 1);
-				vsx_end();
-			}
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
-		bytes = round_down(srclen, POLY1305_BLOCK_SIZE);
-		used = crypto_poly1305_setdctxkey(dctx, src, bytes);
-		if (likely(used)) {
-			srclen -= used;
-			src += used;
-		}
-		if (crypto_simd_usable() && (srclen >= POLY1305_BLOCK_SIZE*4)) {
-			vsx_begin();
-			poly1305_p10le_4blocks(&dctx->h, src, srclen);
-			vsx_end();
-			src += srclen - (srclen % (POLY1305_BLOCK_SIZE * 4));
-			srclen %= POLY1305_BLOCK_SIZE * 4;
-		}
-		while (srclen >= POLY1305_BLOCK_SIZE) {
-			vsx_begin();
-			poly1305_64s(&dctx->h, src, POLY1305_BLOCK_SIZE, 1);
-			vsx_end();
-			srclen -= POLY1305_BLOCK_SIZE;
-			src += POLY1305_BLOCK_SIZE;
-		}
-	}
-
-	if (unlikely(srclen)) {
-		dctx->buflen = srclen;
-		memcpy(dctx->buf, src, srclen);
-	}
-
-	return 0;
-}
-
-static int crypto_poly1305_p10_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	if ((dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		vsx_begin();
-		poly1305_64s(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-		vsx_end();
-		dctx->buflen = 0;
-	}
-
-	poly1305_emit_64(&dctx->h, &dctx->s, dst);
-	return 0;
-}
-
-static struct shash_alg poly1305_alg = {
-	.digestsize	= POLY1305_DIGEST_SIZE,
-	.init		= crypto_poly1305_p10_init,
-	.update		= crypto_poly1305_p10_update,
-	.final		= crypto_poly1305_p10_final,
-	.descsize	= sizeof(struct poly1305_desc_ctx),
-	.base		= {
-		.cra_name		= "poly1305",
-		.cra_driver_name	= "poly1305-p10",
-		.cra_priority		= 300,
-		.cra_blocksize		= POLY1305_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	},
-};
-
-static int __init poly1305_p10_init(void)
-{
-	return crypto_register_shash(&poly1305_alg);
-}
-
-static void __exit poly1305_p10_exit(void)
-{
-	crypto_unregister_shash(&poly1305_alg);
-}
-
-module_cpu_feature_match(PPC_MODULE_FEATURE_P10, poly1305_p10_init);
-module_exit(poly1305_p10_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com>");
-MODULE_DESCRIPTION("Optimized Poly1305 for P10");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-p10");
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/sha1-spe-glue.c linux-libre-6.16-gnu/arch/powerpc/crypto/sha1-spe-glue.c
index 9170892a8557..04c88e173ce1 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/sha1-spe-glue.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/sha1-spe-glue.c
@@ -7,16 +7,13 @@
  * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
  */
 
+#include <asm/switch_to.h>
 #include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
-#include <asm/byteorder.h>
-#include <asm/switch_to.h>
-#include <linux/hardirq.h>
+#include <linux/kernel.h>
+#include <linux/preempt.h>
+#include <linux/module.h>
 
 /*
  * MAX_BYTES defines the number of bytes that are allowed to be processed
@@ -30,7 +27,7 @@
  */
 #define MAX_BYTES 2048
 
-extern void ppc_spe_sha1_transform(u32 *state, const u8 *src, u32 blocks);
+asmlinkage void ppc_spe_sha1_transform(u32 *state, const u8 *src, u32 blocks);
 
 static void spe_begin(void)
 {
@@ -46,126 +43,45 @@ static void spe_end(void)
 	preempt_enable();
 }
 
-static inline void ppc_sha1_clear_context(struct sha1_state *sctx)
+static void ppc_spe_sha1_block(struct sha1_state *sctx, const u8 *src,
+			       int blocks)
 {
-	int count = sizeof(struct sha1_state) >> 2;
-	u32 *ptr = (u32 *)sctx;
-
-	/* make sure we can clear the fast way */
-	BUILD_BUG_ON(sizeof(struct sha1_state) % 4);
-	do { *ptr++ = 0; } while (--count);
-}
-
-static int ppc_spe_sha1_update(struct shash_desc *desc, const u8 *data,
-			unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->count & 0x3f;
-	const unsigned int avail = 64 - offset;
-	unsigned int bytes;
-	const u8 *src = data;
-
-	if (avail > len) {
-		sctx->count += len;
-		memcpy((char *)sctx->buffer + offset, src, len);
-		return 0;
-	}
-
-	sctx->count += len;
-
-	if (offset) {
-		memcpy((char *)sctx->buffer + offset, src, avail);
+	do {
+		int unit = min(blocks, MAX_BYTES / SHA1_BLOCK_SIZE);
 
 		spe_begin();
-		ppc_spe_sha1_transform(sctx->state, (const u8 *)sctx->buffer, 1);
+		ppc_spe_sha1_transform(sctx->state, src, unit);
 		spe_end();
 
-		len -= avail;
-		src += avail;
-	}
-
-	while (len > 63) {
-		bytes = (len > MAX_BYTES) ? MAX_BYTES : len;
-		bytes = bytes & ~0x3f;
-
-		spe_begin();
-		ppc_spe_sha1_transform(sctx->state, src, bytes >> 6);
-		spe_end();
-
-		src += bytes;
-		len -= bytes;
-	}
-
-	memcpy((char *)sctx->buffer, src, len);
-	return 0;
-}
-
-static int ppc_spe_sha1_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->count & 0x3f;
-	char *p = (char *)sctx->buffer + offset;
-	int padlen;
-	__be64 *pbits = (__be64 *)(((char *)&sctx->buffer) + 56);
-	__be32 *dst = (__be32 *)out;
-
-	padlen = 55 - offset;
-	*p++ = 0x80;
-
-	spe_begin();
-
-	if (padlen < 0) {
-		memset(p, 0x00, padlen + sizeof (u64));
-		ppc_spe_sha1_transform(sctx->state, sctx->buffer, 1);
-		p = (char *)sctx->buffer;
-		padlen = 56;
-	}
-
-	memset(p, 0, padlen);
-	*pbits = cpu_to_be64(sctx->count << 3);
-	ppc_spe_sha1_transform(sctx->state, sctx->buffer, 1);
-
-	spe_end();
-
-	dst[0] = cpu_to_be32(sctx->state[0]);
-	dst[1] = cpu_to_be32(sctx->state[1]);
-	dst[2] = cpu_to_be32(sctx->state[2]);
-	dst[3] = cpu_to_be32(sctx->state[3]);
-	dst[4] = cpu_to_be32(sctx->state[4]);
-
-	ppc_sha1_clear_context(sctx);
-	return 0;
+		src += unit * SHA1_BLOCK_SIZE;
+		blocks -= unit;
+	} while (blocks);
 }
 
-static int ppc_spe_sha1_export(struct shash_desc *desc, void *out)
+static int ppc_spe_sha1_update(struct shash_desc *desc, const u8 *data,
+			unsigned int len)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
+	return sha1_base_do_update_blocks(desc, data, len, ppc_spe_sha1_block);
 }
 
-static int ppc_spe_sha1_import(struct shash_desc *desc, const void *in)
+static int ppc_spe_sha1_finup(struct shash_desc *desc, const u8 *src,
+			      unsigned int len, u8 *out)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
+	sha1_base_do_finup(desc, src, len, ppc_spe_sha1_block);
+	return sha1_base_finish(desc, out);
 }
 
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_base_init,
 	.update		=	ppc_spe_sha1_update,
-	.final		=	ppc_spe_sha1_final,
-	.export		=	ppc_spe_sha1_export,
-	.import		=	ppc_spe_sha1_import,
-	.descsize	=	sizeof(struct sha1_state),
-	.statesize	=	sizeof(struct sha1_state),
+	.finup		=	ppc_spe_sha1_finup,
+	.descsize	=	SHA1_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"sha1-ppc-spe",
 		.cra_priority	=	300,
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	SHA1_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/sha1.c linux-libre-6.16-gnu/arch/powerpc/crypto/sha1.c
index f283bbd3f121..4593946aa9b3 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/sha1.c
+++ linux-libre-6.16-gnu/arch/powerpc/crypto/sha1.c
@@ -13,107 +13,46 @@
  * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
  */
 #include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
 #include <crypto/sha1.h>
 #include <crypto/sha1_base.h>
-#include <asm/byteorder.h>
-
-void powerpc_sha_transform(u32 *state, const u8 *src);
-
-static int powerpc_sha1_update(struct shash_desc *desc, const u8 *data,
-			       unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	unsigned int partial, done;
-	const u8 *src;
-
-	partial = sctx->count & 0x3f;
-	sctx->count += len;
-	done = 0;
-	src = data;
-
-	if ((partial + len) > 63) {
-
-		if (partial) {
-			done = -partial;
-			memcpy(sctx->buffer + partial, data, done + 64);
-			src = sctx->buffer;
-		}
-
-		do {
-			powerpc_sha_transform(sctx->state, src);
-			done += 64;
-			src = data + done;
-		} while (done + 63 < len);
-
-		partial = 0;
-	}
-	memcpy(sctx->buffer + partial, src, len - done);
-
-	return 0;
-}
+#include <linux/kernel.h>
+#include <linux/module.h>
 
+asmlinkage void powerpc_sha_transform(u32 *state, const u8 *src);
 
-/* Add padding and return the message digest. */
-static int powerpc_sha1_final(struct shash_desc *desc, u8 *out)
+static void powerpc_sha_block(struct sha1_state *sctx, const u8 *data,
+			      int blocks)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	__be32 *dst = (__be32 *)out;
-	u32 i, index, padlen;
-	__be64 bits;
-	static const u8 padding[64] = { 0x80, };
-
-	bits = cpu_to_be64(sctx->count << 3);
-
-	/* Pad out to 56 mod 64 */
-	index = sctx->count & 0x3f;
-	padlen = (index < 56) ? (56 - index) : ((64+56) - index);
-	powerpc_sha1_update(desc, padding, padlen);
-
-	/* Append length */
-	powerpc_sha1_update(desc, (const u8 *)&bits, sizeof(bits));
-
-	/* Store state in digest */
-	for (i = 0; i < 5; i++)
-		dst[i] = cpu_to_be32(sctx->state[i]);
-
-	/* Wipe context */
-	memset(sctx, 0, sizeof *sctx);
-
-	return 0;
+	do {
+		powerpc_sha_transform(sctx->state, data);
+		data += 64;
+	} while (--blocks);
 }
 
-static int powerpc_sha1_export(struct shash_desc *desc, void *out)
+static int powerpc_sha1_update(struct shash_desc *desc, const u8 *data,
+			       unsigned int len)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
+	return sha1_base_do_update_blocks(desc, data, len, powerpc_sha_block);
 }
 
-static int powerpc_sha1_import(struct shash_desc *desc, const void *in)
+/* Add padding and return the message digest. */
+static int powerpc_sha1_finup(struct shash_desc *desc, const u8 *src,
+			      unsigned int len, u8 *out)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
+	sha1_base_do_finup(desc, src, len, powerpc_sha_block);
+	return sha1_base_finish(desc, out);
 }
 
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_base_init,
 	.update		=	powerpc_sha1_update,
-	.final		=	powerpc_sha1_final,
-	.export		=	powerpc_sha1_export,
-	.import		=	powerpc_sha1_import,
-	.descsize	=	sizeof(struct sha1_state),
-	.statesize	=	sizeof(struct sha1_state),
+	.finup		=	powerpc_sha1_finup,
+	.descsize	=	SHA1_STATE_SIZE,
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"sha1-powerpc",
+		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_blocksize	=	SHA1_BLOCK_SIZE,
 		.cra_module	=	THIS_MODULE,
 	}
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/sha256-spe-glue.c linux-libre-6.16-gnu/arch/powerpc/crypto/sha256-spe-glue.c
deleted file mode 100644
index 2997d13236e0..000000000000
--- linux-libre-6.15-gnu/arch/powerpc/crypto/sha256-spe-glue.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for SHA-256 implementation for SPE instructions (PPC)
- *
- * Based on generic implementation. The assembler module takes care 
- * about the SPE registers so it can run from interrupt context.
- *
- * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/byteorder.h>
-#include <asm/switch_to.h>
-#include <linux/hardirq.h>
-
-/*
- * MAX_BYTES defines the number of bytes that are allowed to be processed
- * between preempt_disable() and preempt_enable(). SHA256 takes ~2,000
- * operations per 64 bytes. e500 cores can issue two arithmetic instructions
- * per clock cycle using one 32/64 bit unit (SU1) and one 32 bit unit (SU2).
- * Thus 1KB of input data will need an estimated maximum of 18,000 cycles.
- * Headroom for cache misses included. Even with the low end model clocked
- * at 667 MHz this equals to a critical time window of less than 27us.
- *
- */
-#define MAX_BYTES 1024
-
-extern void ppc_spe_sha256_transform(u32 *state, const u8 *src, u32 blocks);
-
-static void spe_begin(void)
-{
-	/* We just start SPE operations and will save SPE registers later. */
-	preempt_disable();
-	enable_kernel_spe();
-}
-
-static void spe_end(void)
-{
-	disable_kernel_spe();
-	/* reenable preemption */
-	preempt_enable();
-}
-
-static inline void ppc_sha256_clear_context(struct sha256_state *sctx)
-{
-	int count = sizeof(struct sha256_state) >> 2;
-	u32 *ptr = (u32 *)sctx;
-
-	/* make sure we can clear the fast way */
-	BUILD_BUG_ON(sizeof(struct sha256_state) % 4);
-	do { *ptr++ = 0; } while (--count);
-}
-
-static int ppc_spe_sha256_update(struct shash_desc *desc, const u8 *data,
-			unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->count & 0x3f;
-	const unsigned int avail = 64 - offset;
-	unsigned int bytes;
-	const u8 *src = data;
-
-	if (avail > len) {
-		sctx->count += len;
-		memcpy((char *)sctx->buf + offset, src, len);
-		return 0;
-	}
-
-	sctx->count += len;
-
-	if (offset) {
-		memcpy((char *)sctx->buf + offset, src, avail);
-
-		spe_begin();
-		ppc_spe_sha256_transform(sctx->state, (const u8 *)sctx->buf, 1);
-		spe_end();
-
-		len -= avail;
-		src += avail;
-	}
-
-	while (len > 63) {
-		/* cut input data into smaller blocks */
-		bytes = (len > MAX_BYTES) ? MAX_BYTES : len;
-		bytes = bytes & ~0x3f;
-
-		spe_begin();
-		ppc_spe_sha256_transform(sctx->state, src, bytes >> 6);
-		spe_end();
-
-		src += bytes;
-		len -= bytes;
-	}
-
-	memcpy((char *)sctx->buf, src, len);
-	return 0;
-}
-
-static int ppc_spe_sha256_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	const unsigned int offset = sctx->count & 0x3f;
-	char *p = (char *)sctx->buf + offset;
-	int padlen;
-	__be64 *pbits = (__be64 *)(((char *)&sctx->buf) + 56);
-	__be32 *dst = (__be32 *)out;
-
-	padlen = 55 - offset;
-	*p++ = 0x80;
-
-	spe_begin();
-
-	if (padlen < 0) {
-		memset(p, 0x00, padlen + sizeof (u64));
-		ppc_spe_sha256_transform(sctx->state, sctx->buf, 1);
-		p = (char *)sctx->buf;
-		padlen = 56;
-	}
-
-	memset(p, 0, padlen);
-	*pbits = cpu_to_be64(sctx->count << 3);
-	ppc_spe_sha256_transform(sctx->state, sctx->buf, 1);
-
-	spe_end();
-
-	dst[0] = cpu_to_be32(sctx->state[0]);
-	dst[1] = cpu_to_be32(sctx->state[1]);
-	dst[2] = cpu_to_be32(sctx->state[2]);
-	dst[3] = cpu_to_be32(sctx->state[3]);
-	dst[4] = cpu_to_be32(sctx->state[4]);
-	dst[5] = cpu_to_be32(sctx->state[5]);
-	dst[6] = cpu_to_be32(sctx->state[6]);
-	dst[7] = cpu_to_be32(sctx->state[7]);
-
-	ppc_sha256_clear_context(sctx);
-	return 0;
-}
-
-static int ppc_spe_sha224_final(struct shash_desc *desc, u8 *out)
-{
-	__be32 D[SHA256_DIGEST_SIZE >> 2];
-	__be32 *dst = (__be32 *)out;
-
-	ppc_spe_sha256_final(desc, (u8 *)D);
-
-	/* avoid bytewise memcpy */
-	dst[0] = D[0];
-	dst[1] = D[1];
-	dst[2] = D[2];
-	dst[3] = D[3];
-	dst[4] = D[4];
-	dst[5] = D[5];
-	dst[6] = D[6];
-
-	/* clear sensitive data */
-	memzero_explicit(D, SHA256_DIGEST_SIZE);
-	return 0;
-}
-
-static int ppc_spe_sha256_export(struct shash_desc *desc, void *out)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int ppc_spe_sha256_import(struct shash_desc *desc, const void *in)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
-}
-
-static struct shash_alg algs[2] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	ppc_spe_sha256_update,
-	.final		=	ppc_spe_sha256_final,
-	.export		=	ppc_spe_sha256_export,
-	.import		=	ppc_spe_sha256_import,
-	.descsize	=	sizeof(struct sha256_state),
-	.statesize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name=	"sha256-ppc-spe",
-		.cra_priority	=	300,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	ppc_spe_sha256_update,
-	.final		=	ppc_spe_sha224_final,
-	.export		=	ppc_spe_sha256_export,
-	.import		=	ppc_spe_sha256_import,
-	.descsize	=	sizeof(struct sha256_state),
-	.statesize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name=	"sha224-ppc-spe",
-		.cra_priority	=	300,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init ppc_spe_sha256_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit ppc_spe_sha256_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_init(ppc_spe_sha256_mod_init);
-module_exit(ppc_spe_sha256_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm, SPE optimized");
-
-MODULE_ALIAS_CRYPTO("sha224");
-MODULE_ALIAS_CRYPTO("sha224-ppc-spe");
-MODULE_ALIAS_CRYPTO("sha256");
-MODULE_ALIAS_CRYPTO("sha256-ppc-spe");
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/book3s/32/pgtable.h linux-libre-6.16-gnu/arch/powerpc/include/asm/book3s/32/pgtable.h
index 42c3af90d1f0..92d21c6faf1e 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -365,7 +365,7 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h linux-libre-6.16-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
index 6d98e6f08d4d..a2ddcbb3fcb9 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -693,7 +693,7 @@ static inline pte_t pte_swp_mkexclusive(pte_t pte)
 	return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_SWP_EXCLUSIVE));
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_SWP_EXCLUSIVE));
 }
@@ -1096,7 +1096,6 @@ static inline bool pmd_access_permitted(pmd_t pmd, bool write)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
 extern pud_t pfn_pud(unsigned long pfn, pgprot_t pgprot);
-extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
 extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
 extern pud_t pud_modify(pud_t pud, pgprot_t newprot);
 extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/guest-state-buffer.h linux-libre-6.16-gnu/arch/powerpc/include/asm/guest-state-buffer.h
index d107abe1468f..acd61eb36d59 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/guest-state-buffer.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/guest-state-buffer.h
@@ -28,6 +28,21 @@
  /* Process Table Info */
 #define KVMPPC_GSID_PROCESS_TABLE		0x0006
 
+/* Guest Management Heap Size */
+#define KVMPPC_GSID_L0_GUEST_HEAP		0x0800
+
+/* Guest Management Heap Max Size */
+#define KVMPPC_GSID_L0_GUEST_HEAP_MAX		0x0801
+
+/* Guest Pagetable Size */
+#define KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE	0x0802
+
+/* Guest Pagetable Max Size */
+#define KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX	0x0803
+
+/* Guest Pagetable Reclaim in bytes */
+#define KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM	0x0804
+
 /* H_GUEST_RUN_VCPU input buffer Info */
 #define KVMPPC_GSID_RUN_INPUT			0x0C00
 /* H_GUEST_RUN_VCPU output buffer Info */
@@ -106,6 +121,11 @@
 #define KVMPPC_GSE_GUESTWIDE_COUNT \
 	(KVMPPC_GSE_GUESTWIDE_END - KVMPPC_GSE_GUESTWIDE_START + 1)
 
+#define KVMPPC_GSE_HOSTWIDE_START KVMPPC_GSID_L0_GUEST_HEAP
+#define KVMPPC_GSE_HOSTWIDE_END KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM
+#define KVMPPC_GSE_HOSTWIDE_COUNT \
+	(KVMPPC_GSE_HOSTWIDE_END - KVMPPC_GSE_HOSTWIDE_START + 1)
+
 #define KVMPPC_GSE_META_START KVMPPC_GSID_RUN_INPUT
 #define KVMPPC_GSE_META_END KVMPPC_GSID_VPA
 #define KVMPPC_GSE_META_COUNT (KVMPPC_GSE_META_END - KVMPPC_GSE_META_START + 1)
@@ -130,7 +150,8 @@
 	(KVMPPC_GSE_INTR_REGS_END - KVMPPC_GSE_INTR_REGS_START + 1)
 
 #define KVMPPC_GSE_IDEN_COUNT                                 \
-	(KVMPPC_GSE_GUESTWIDE_COUNT + KVMPPC_GSE_META_COUNT + \
+	(KVMPPC_GSE_HOSTWIDE_COUNT + \
+	 KVMPPC_GSE_GUESTWIDE_COUNT + KVMPPC_GSE_META_COUNT + \
 	 KVMPPC_GSE_DW_REGS_COUNT + KVMPPC_GSE_W_REGS_COUNT + \
 	 KVMPPC_GSE_VSRS_COUNT + KVMPPC_GSE_INTR_REGS_COUNT)
 
@@ -139,10 +160,11 @@
  */
 enum {
 	KVMPPC_GS_CLASS_GUESTWIDE = 0x01,
-	KVMPPC_GS_CLASS_META = 0x02,
-	KVMPPC_GS_CLASS_DWORD_REG = 0x04,
-	KVMPPC_GS_CLASS_WORD_REG = 0x08,
-	KVMPPC_GS_CLASS_VECTOR = 0x10,
+	KVMPPC_GS_CLASS_HOSTWIDE = 0x02,
+	KVMPPC_GS_CLASS_META = 0x04,
+	KVMPPC_GS_CLASS_DWORD_REG = 0x08,
+	KVMPPC_GS_CLASS_WORD_REG = 0x10,
+	KVMPPC_GS_CLASS_VECTOR = 0x18,
 	KVMPPC_GS_CLASS_INTR = 0x20,
 };
 
@@ -164,6 +186,7 @@ enum {
  */
 enum {
 	KVMPPC_GS_FLAGS_WIDE = 0x01,
+	KVMPPC_GS_FLAGS_HOST_WIDE = 0x02,
 };
 
 /**
@@ -287,7 +310,7 @@ struct kvmppc_gs_msg_ops {
  * struct kvmppc_gs_msg - a guest state message
  * @bitmap: the guest state ids that should be included
  * @ops: modify message behavior for reading and writing to buffers
- * @flags: guest wide or thread wide
+ * @flags: host wide, guest wide or thread wide
  * @data: location where buffer data will be written to or from.
  *
  * A guest state message is allows flexibility in sending in receiving data
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/hvcall.h linux-libre-6.16-gnu/arch/powerpc/include/asm/hvcall.h
index eeef13db2770..6df6dbbe1e7c 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/hvcall.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/hvcall.h
@@ -490,14 +490,15 @@
 #define H_RPTI_PAGE_ALL (-1UL)
 
 /* Flags for H_GUEST_{S,G}_STATE */
-#define H_GUEST_FLAGS_WIDE     (1UL<<(63-0))
+#define H_GUEST_FLAGS_WIDE     (1UL << (63 - 0))
+#define H_GUEST_FLAGS_HOST_WIDE	(1UL << (63 - 1))
 
 /* Flag values used for H_{S,G}SET_GUEST_CAPABILITIES */
-#define H_GUEST_CAP_COPY_MEM	(1UL<<(63-0))
-#define H_GUEST_CAP_POWER9	(1UL<<(63-1))
-#define H_GUEST_CAP_POWER10	(1UL<<(63-2))
-#define H_GUEST_CAP_POWER11	(1UL<<(63-3))
-#define H_GUEST_CAP_BITMAP2	(1UL<<(63-63))
+#define H_GUEST_CAP_COPY_MEM	(1UL << (63 - 0))
+#define H_GUEST_CAP_POWER9	(1UL << (63 - 1))
+#define H_GUEST_CAP_POWER10	(1UL << (63 - 2))
+#define H_GUEST_CAP_POWER11	(1UL << (63 - 3))
+#define H_GUEST_CAP_BITMAP2	(1UL << (63 - 63))
 
 /*
  * Defines for H_HTM - Macros for hardware trace macro (HTM) function.
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/nohash/pgtable.h linux-libre-6.16-gnu/arch/powerpc/include/asm/nohash/pgtable.h
index 8d1f0b7062eb..7d6b9e5b286e 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/nohash/pgtable.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/nohash/pgtable.h
@@ -286,7 +286,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/pgtable.h linux-libre-6.16-gnu/arch/powerpc/include/asm/pgtable.h
index 2f72ad885332..93d77ad5a92f 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/pgtable.h
@@ -53,9 +53,8 @@ void set_ptes(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 #define MAX_PTRS_PER_PGD PTRS_PER_PGD
 #endif
 
-/* Keep these as a macros to avoid include dependency mess */
+/* Keep this as a macro to avoid include dependency mess */
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
 static inline unsigned long pte_pfn(pte_t pte)
 {
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/plpar_wrappers.h linux-libre-6.16-gnu/arch/powerpc/include/asm/plpar_wrappers.h
index 91be7b885944..f2b6cc4341bb 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/plpar_wrappers.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/plpar_wrappers.h
@@ -65,6 +65,14 @@ static inline long register_dtl(unsigned long cpu, unsigned long vpa)
 	return vpa_call(H_VPA_REG_DTL, cpu, vpa);
 }
 
+/*
+ * Invokes H_HTM hcall with parameters passed from htm_hcall_wrapper.
+ * flags: Set to hardwareTarget.
+ * target: Specifies target using node index, nodal chip index and core index.
+ * operation : action to perform ie configure, start, stop, deconfigure, trace
+ * based on the HTM type.
+ * param1, param2, param3: parameters for each action.
+ */
 static inline long htm_call(unsigned long flags, unsigned long target,
                unsigned long operation, unsigned long param1,
                unsigned long param2, unsigned long param3)
@@ -73,17 +81,17 @@ static inline long htm_call(unsigned long flags, unsigned long target,
                                  param1, param2, param3);
 }
 
-static inline long htm_get_dump_hardware(unsigned long nodeindex,
+static inline long htm_hcall_wrapper(unsigned long flags, unsigned long nodeindex,
                unsigned long nodalchipindex, unsigned long coreindexonchip,
-               unsigned long type, unsigned long addr, unsigned long size,
-               unsigned long offset)
+	       unsigned long type, unsigned long htm_op, unsigned long param1, unsigned long param2,
+	       unsigned long param3)
 {
-       return htm_call(H_HTM_FLAGS_HARDWARE_TARGET,
+	return htm_call(H_HTM_FLAGS_HARDWARE_TARGET | flags,
                        H_HTM_TARGET_NODE_INDEX(nodeindex) |
                        H_HTM_TARGET_NODAL_CHIP_INDEX(nodalchipindex) |
                        H_HTM_TARGET_CORE_INDEX_ON_CHIP(coreindexonchip),
-                       H_HTM_OP(H_HTM_OP_DUMP_DATA) | H_HTM_TYPE(type),
-                       addr, size, offset);
+		       H_HTM_OP(htm_op) | H_HTM_TYPE(type),
+		       param1, param2, param3);
 }
 
 extern void vpa_init(int cpu);
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/ppc_asm.h linux-libre-6.16-gnu/arch/powerpc/include/asm/ppc_asm.h
index 02897f4b0dbf..b891910fce8a 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/ppc_asm.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/ppc_asm.h
@@ -183,7 +183,7 @@
 /*
  * Used to name C functions called from asm
  */
-#ifdef CONFIG_PPC_KERNEL_PCREL
+#if defined(__powerpc64__) && defined(CONFIG_PPC_KERNEL_PCREL)
 #define CFUNC(name) name@notoc
 #else
 #define CFUNC(name) name
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/preempt.h linux-libre-6.16-gnu/arch/powerpc/include/asm/preempt.h
new file mode 100644
index 000000000000..000e2b9681f3
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/preempt.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_POWERPC_PREEMPT_H
+#define __ASM_POWERPC_PREEMPT_H
+
+#include <asm-generic/preempt.h>
+
+#if defined(CONFIG_PREEMPT_DYNAMIC)
+#include <linux/jump_label.h>
+DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+#define need_irq_preemption() \
+	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
+#else
+#define need_irq_preemption()   (IS_ENABLED(CONFIG_PREEMPTION))
+#endif
+
+#endif /* __ASM_POWERPC_PREEMPT_H */
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/rtas.h linux-libre-6.16-gnu/arch/powerpc/include/asm/rtas.h
index 04406162fc5a..75fa0293c508 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/rtas.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/rtas.h
@@ -515,6 +515,10 @@ extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
 extern unsigned long rtas_rmo_buf;
 
 extern struct mutex rtas_ibm_get_vpd_lock;
+extern struct mutex rtas_ibm_get_indices_lock;
+extern struct mutex rtas_ibm_set_dynamic_indicator_lock;
+extern struct mutex rtas_ibm_get_dynamic_sensor_state_lock;
+extern struct mutex rtas_ibm_physical_attestation_lock;
 
 #define GLOBAL_INTERRUPT_QUEUE 9005
 
diff --git linux-libre-6.15-gnu/arch/powerpc/include/asm/syscall.h linux-libre-6.16-gnu/arch/powerpc/include/asm/syscall.h
index 3dd36c5e334a..4b3c52ed6e9d 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/asm/syscall.h
@@ -39,6 +39,16 @@ static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 		return -1;
 }
 
+static inline void syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->gpr[0] = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
@@ -110,6 +120,16 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	}
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->gpr[3], args, 6 * sizeof(args[0]));
+
+	/* Also copy the first argument into orig_gpr3 */
+	regs->orig_gpr3 = args[0];
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	if (is_tsk_32bit_task(task))
diff --git linux-libre-6.15-gnu/arch/powerpc/include/uapi/asm/ioctls.h linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/ioctls.h
index 2c145da3b774..b5211e413829 100644
--- linux-libre-6.15-gnu/arch/powerpc/include/uapi/asm/ioctls.h
+++ linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/ioctls.h
@@ -23,10 +23,10 @@
 #define TCSETSW		_IOW('t', 21, struct termios)
 #define TCSETSF		_IOW('t', 22, struct termios)
 
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
+#define TCGETA		0x40147417 /* _IOR('t', 23, struct termio) */
+#define TCSETA		0x80147418 /* _IOW('t', 24, struct termio) */
+#define TCSETAW		0x80147419 /* _IOW('t', 25, struct termio) */
+#define TCSETAF		0x8014741c /* _IOW('t', 28, struct termio) */
 
 #define TCSBRK		_IO('t', 29)
 #define TCXONC		_IO('t', 30)
diff --git linux-libre-6.15-gnu/arch/powerpc/include/uapi/asm/papr-indices.h linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-indices.h
new file mode 100644
index 000000000000..c2999d89d52a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-indices.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_INDICES_H_
+#define _UAPI_PAPR_INDICES_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+#define LOC_CODE_SIZE			80
+#define RTAS_GET_INDICES_BUF_SIZE	SZ_4K
+
+struct papr_indices_io_block {
+	union {
+		struct {
+			__u8 is_sensor; /* 0 for indicator and 1 for sensor */
+			__u32 indice_type;
+		} indices;
+		struct {
+			__u32 token; /* Sensor or indicator token */
+			__u32 state; /* get / set state */
+			/*
+			 * PAPR+ 12.3.2.4 Converged Location Code Rules - Length
+			 * Restrictions. 79 characters plus null.
+			 */
+			char location_code_str[LOC_CODE_SIZE]; /* location code */
+		} dynamic_param;
+	};
+};
+
+/*
+ * ioctls for /dev/papr-indices.
+ * PAPR_INDICES_IOC_GET: Returns a get-indices handle fd to read data
+ * PAPR_DYNAMIC_SENSOR_IOC_GET: Gets the state of the input sensor
+ * PAPR_DYNAMIC_INDICATOR_IOC_SET: Sets the new state for the input indicator
+ */
+#define PAPR_INDICES_IOC_GET		_IOW(PAPR_MISCDEV_IOC_ID, 3, struct papr_indices_io_block)
+#define PAPR_DYNAMIC_SENSOR_IOC_GET	_IOWR(PAPR_MISCDEV_IOC_ID, 4, struct papr_indices_io_block)
+#define PAPR_DYNAMIC_INDICATOR_IOC_SET	_IOW(PAPR_MISCDEV_IOC_ID, 5, struct papr_indices_io_block)
+
+
+#endif /* _UAPI_PAPR_INDICES_H_ */
diff --git linux-libre-6.15-gnu/arch/powerpc/include/uapi/asm/papr-physical-attestation.h linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-physical-attestation.h
new file mode 100644
index 000000000000..ea746837bb9a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-physical-attestation.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_PHYSICAL_ATTESTATION_H_
+#define _UAPI_PAPR_PHYSICAL_ATTESTATION_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+#define PAPR_PHYATTEST_MAX_INPUT 4084 /* Max 4K buffer: 4K-12 */
+
+/*
+ * Defined in PAPR 2.13+ 21.6 Attestation Command Structures.
+ * User space pass this struct and the max size should be 4K.
+ */
+struct papr_phy_attest_io_block {
+	__u8 version;
+	__u8 command;
+	__u8 TCG_major_ver;
+	__u8 TCG_minor_ver;
+	__be32 length;
+	__be32 correlator;
+	__u8 payload[PAPR_PHYATTEST_MAX_INPUT];
+};
+
+/*
+ * ioctl for /dev/papr-physical-attestation. Returns a attestation
+ * command fd handle
+ */
+#define PAPR_PHY_ATTEST_IOC_HANDLE _IOW(PAPR_MISCDEV_IOC_ID, 8, struct papr_phy_attest_io_block)
+
+#endif /* _UAPI_PAPR_PHYSICAL_ATTESTATION_H_ */
diff --git linux-libre-6.15-gnu/arch/powerpc/include/uapi/asm/papr-platform-dump.h linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-platform-dump.h
new file mode 100644
index 000000000000..8a1c060e89a9
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/include/uapi/asm/papr-platform-dump.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_PLATFORM_DUMP_H_
+#define _UAPI_PAPR_PLATFORM_DUMP_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+/*
+ * ioctl for /dev/papr-platform-dump. Returns a platform-dump handle fd
+ * corresponding to dump tag.
+ */
+#define PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE _IOW(PAPR_MISCDEV_IOC_ID, 6, __u64)
+#define PAPR_PLATFORM_DUMP_IOC_INVALIDATE    _IOW(PAPR_MISCDEV_IOC_ID, 7, __u64)
+
+#endif /* _UAPI_PAPR_PLATFORM_DUMP_H_ */
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/Makefile linux-libre-6.16-gnu/arch/powerpc/kernel/Makefile
index 6ac621155ec3..fb2b95267022 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/Makefile
@@ -126,7 +126,7 @@ obj-$(CONFIG_PPC_BOOK3S_32)	+= head_book3s_32.o
 obj-$(CONFIG_44x)		+= head_44x.o
 obj-$(CONFIG_PPC_8xx)		+= head_8xx.o
 obj-$(CONFIG_PPC_85xx)		+= head_85xx.o
-extra-y				+= vmlinux.lds
+always-$(KBUILD_BUILTIN)	+= vmlinux.lds
 
 obj-$(CONFIG_RELOCATABLE)	+= reloc_$(BITS).o
 
@@ -160,9 +160,7 @@ endif
 
 obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM)	+= tm.o
 
-ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC_CORE)(CONFIG_PPC_BOOK3S),)
 obj-y				+= ppc_save_regs.o
-endif
 
 obj-$(CONFIG_EPAPR_PARAVIRT)	+= epapr_paravirt.o epapr_hcalls.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o kvm_emul.o
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/eeh.c linux-libre-6.16-gnu/arch/powerpc/kernel/eeh.c
index 83fe99861eb1..ca7f7bb2b478 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/eeh.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/eeh.c
@@ -1509,6 +1509,8 @@ int eeh_pe_configure(struct eeh_pe *pe)
 	/* Invalid PE ? */
 	if (!pe)
 		return -ENODEV;
+	else
+		ret = eeh_ops->configure_bridge(pe);
 
 	return ret;
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/fadump.c linux-libre-6.16-gnu/arch/powerpc/kernel/fadump.c
index df16c7f547ab..8ca49e40c473 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/fadump.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/fadump.c
@@ -290,10 +290,8 @@ static void __init fadump_show_config(void)
 	if (!fw_dump.fadump_supported)
 		return;
 
-	pr_debug("Fadump enabled    : %s\n",
-				(fw_dump.fadump_enabled ? "yes" : "no"));
-	pr_debug("Dump Active       : %s\n",
-				(fw_dump.dump_active ? "yes" : "no"));
+	pr_debug("Fadump enabled    : %s\n", str_yes_no(fw_dump.fadump_enabled));
+	pr_debug("Dump Active       : %s\n", str_yes_no(fw_dump.dump_active));
 	pr_debug("Dump section sizes:\n");
 	pr_debug("    CPU state data size: %lx\n", fw_dump.cpu_state_data_size);
 	pr_debug("    HPTE region size   : %lx\n", fw_dump.hpte_region_size);
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/interrupt.c linux-libre-6.16-gnu/arch/powerpc/kernel/interrupt.c
index 8f4acc55407b..e0c681d0b076 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/interrupt.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/interrupt.c
@@ -25,6 +25,10 @@
 unsigned long global_dbcr0[NR_CPUS];
 #endif
 
+#if defined(CONFIG_PREEMPT_DYNAMIC)
+DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+#endif
+
 #ifdef CONFIG_PPC_BOOK3S_64
 DEFINE_STATIC_KEY_FALSE(interrupt_exit_not_reentrant);
 static inline bool exit_must_hard_disable(void)
@@ -396,7 +400,7 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
 		/* Returning to a kernel context with local irqs enabled. */
 		WARN_ON_ONCE(!(regs->msr & MSR_EE));
 again:
-		if (IS_ENABLED(CONFIG_PREEMPTION)) {
+		if (need_irq_preemption()) {
 			/* Return to preemptible kernel context */
 			if (unlikely(read_thread_flags() & _TIF_NEED_RESCHED)) {
 				if (preempt_count() == 0)
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/iommu.c linux-libre-6.16-gnu/arch/powerpc/kernel/iommu.c
index 0ebae6e4c19d..244eb4857e7f 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/iommu.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/iommu.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/string_choices.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitmap.h>
 #include <linux/iommu-helper.h>
@@ -769,8 +770,8 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid,
 	iommu_table_clear(tbl);
 
 	if (!welcomed) {
-		printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
-		       novmerge ? "disabled" : "enabled");
+		pr_info("IOMMU table initialized, virtual merging %s\n",
+			str_disabled_enabled(novmerge));
 		welcomed = 1;
 	}
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/proc_powerpc.c linux-libre-6.16-gnu/arch/powerpc/kernel/proc_powerpc.c
index 3816a2bf2b84..d083b4517065 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/proc_powerpc.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/proc_powerpc.c
@@ -9,6 +9,7 @@
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/string.h>
 
 #include <asm/machdep.h>
 #include <asm/vdso_datapage.h>
@@ -56,7 +57,7 @@ static int __init proc_ppc64_init(void)
 {
 	struct proc_dir_entry *pde;
 
-	strcpy((char *)systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
+	strscpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
 	systemcfg->version.major = SYSTEMCFG_MAJOR;
 	systemcfg->version.minor = SYSTEMCFG_MINOR;
 	systemcfg->processor = mfspr(SPRN_PVR);
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/process.c linux-libre-6.16-gnu/arch/powerpc/kernel/process.c
index ef91f71e07c4..855e09886503 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/process.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/process.c
@@ -1000,7 +1000,7 @@ static inline void tm_reclaim_task(struct task_struct *tsk)
 
 	WARN_ON(tm_suspend_disabled);
 
-	TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, "
+	TM_DEBUG("---- tm_reclaim on pid %d (NIP=%lx, "
 		 "ccr=%lx, msr=%lx, trap=%lx)\n",
 		 tsk->pid, thr->regs->nip,
 		 thr->regs->ccr, thr->regs->msr,
@@ -1008,7 +1008,7 @@ static inline void tm_reclaim_task(struct task_struct *tsk)
 
 	tm_reclaim_thread(thr, TM_CAUSE_RESCHED);
 
-	TM_DEBUG("--- tm_reclaim on pid %d complete\n",
+	TM_DEBUG("---- tm_reclaim on pid %d complete\n",
 		 tsk->pid);
 
 out_and_saveregs:
@@ -2367,14 +2367,14 @@ void __no_sanitize_address show_stack(struct task_struct *tsk,
 				(sp + STACK_INT_FRAME_REGS);
 
 			lr = regs->link;
-			printk("%s--- interrupt: %lx at %pS\n",
+			printk("%s---- interrupt: %lx at %pS\n",
 			       loglvl, regs->trap, (void *)regs->nip);
 
 			// Detect the case of an empty pt_regs at the very base
 			// of the stack and suppress showing it in full.
 			if (!empty_user_regs(regs, tsk)) {
 				__show_regs(regs);
-				printk("%s--- interrupt: %lx\n", loglvl, regs->trap);
+				printk("%s---- interrupt: %lx\n", loglvl, regs->trap);
 			}
 
 			firstframe = 1;
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/rtas.c linux-libre-6.16-gnu/arch/powerpc/kernel/rtas.c
index d7a738f1858d..e61245c4468e 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/rtas.c
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/rtas.c
@@ -92,12 +92,12 @@ struct rtas_function {
  * Per-function locks for sequence-based RTAS functions.
  */
 static DEFINE_MUTEX(rtas_ibm_activate_firmware_lock);
-static DEFINE_MUTEX(rtas_ibm_get_dynamic_sensor_state_lock);
-static DEFINE_MUTEX(rtas_ibm_get_indices_lock);
 static DEFINE_MUTEX(rtas_ibm_lpar_perftools_lock);
-static DEFINE_MUTEX(rtas_ibm_physical_attestation_lock);
-static DEFINE_MUTEX(rtas_ibm_set_dynamic_indicator_lock);
+DEFINE_MUTEX(rtas_ibm_physical_attestation_lock);
 DEFINE_MUTEX(rtas_ibm_get_vpd_lock);
+DEFINE_MUTEX(rtas_ibm_get_indices_lock);
+DEFINE_MUTEX(rtas_ibm_set_dynamic_indicator_lock);
+DEFINE_MUTEX(rtas_ibm_get_dynamic_sensor_state_lock);
 
 static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__CHECK_EXCEPTION] = {
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/trace/ftrace_entry.S linux-libre-6.16-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
index 2c1b24100eca..3565c67fc638 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/trace/ftrace_entry.S
@@ -212,10 +212,10 @@
 	bne-	1f
 
 	mr	r3, r15
+1:	mtlr	r3
 	.if \allregs == 0
 	REST_GPR(15, r1)
 	.endif
-1:	mtlr	r3
 #endif
 
 	/* Restore gprs */
diff --git linux-libre-6.15-gnu/arch/powerpc/kernel/vdso/Makefile linux-libre-6.16-gnu/arch/powerpc/kernel/vdso/Makefile
index e8824f933326..8834dfe9d727 100644
--- linux-libre-6.15-gnu/arch/powerpc/kernel/vdso/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/kernel/vdso/Makefile
@@ -53,7 +53,7 @@ ldflags-$(CONFIG_LD_ORPHAN_WARN) += -Wl,--orphan-handling=$(CONFIG_LD_ORPHAN_WAR
 ldflags-y += $(filter-out $(CC_AUTO_VAR_INIT_ZERO_ENABLER) $(CC_FLAGS_FTRACE) -Wa$(comma)%, $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS))
 
 CC32FLAGS := -m32
-CC32FLAGSREMOVE := -mcmodel=medium -mabi=elfv1 -mabi=elfv2 -mcall-aixdesc
+CC32FLAGSREMOVE := -mcmodel=medium -mabi=elfv1 -mabi=elfv2 -mcall-aixdesc -mpcrel
 ifdef CONFIG_CC_IS_CLANG
 # This flag is supported by clang for 64-bit but not 32-bit so it will cause
 # an unused command line flag warning for this file.
diff --git linux-libre-6.15-gnu/arch/powerpc/kexec/crash.c linux-libre-6.16-gnu/arch/powerpc/kexec/crash.c
index 9ac3266e4965..a325c1c02f96 100644
--- linux-libre-6.15-gnu/arch/powerpc/kexec/crash.c
+++ linux-libre-6.16-gnu/arch/powerpc/kexec/crash.c
@@ -359,7 +359,10 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	if (TRAP(regs) == INTERRUPT_SYSTEM_RESET)
 		is_via_system_reset = 1;
 
-	crash_smp_send_stop();
+	if (IS_ENABLED(CONFIG_SMP))
+		crash_smp_send_stop();
+	else
+		crash_kexec_prepare();
 
 	crash_save_cpu(regs, crashing_cpu);
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/Kconfig linux-libre-6.16-gnu/arch/powerpc/kvm/Kconfig
index dbfdc126bf14..2f2702c867f7 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/Kconfig
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/Kconfig
@@ -83,6 +83,7 @@ config KVM_BOOK3S_64_HV
 	depends on KVM_BOOK3S_64 && PPC_POWERNV
 	select KVM_BOOK3S_HV_POSSIBLE
 	select KVM_GENERIC_MMU_NOTIFIER
+	select KVM_BOOK3S_HV_PMU
 	select CMA
 	help
 	  Support running unmodified book3s_64 guest kernels in
@@ -171,6 +172,18 @@ config KVM_BOOK3S_HV_NESTED_PMU_WORKAROUND
 	  those buggy L1s which saves the L2 state, at the cost of performance
 	  in all nested-capable guest entry/exit.
 
+config KVM_BOOK3S_HV_PMU
+	tristate "Hypervisor Perf events for KVM Book3s-HV"
+	depends on KVM_BOOK3S_64_HV
+	help
+	  Enable Book3s-HV Hypervisor Perf events PMU named 'kvm-hv'. These
+	  Perf events give an overview of hypervisor performance overall
+	  instead of a specific guests. Currently the PMU reports
+	  L0-Hypervisor stats on a kvm-hv enabled PSeries LPAR like:
+	  * Total/Used Guest-Heap
+	  * Total/Used Guest Page-table Memory
+	  * Total amount of Guest Page-table Memory reclaimed
+
 config KVM_BOOKE_HV
 	bool
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/book3s_hv.c linux-libre-6.16-gnu/arch/powerpc/kvm/book3s_hv.c
index 19f4d298dd17..7667563fb9ff 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/book3s_hv.c
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/book3s_hv.c
@@ -6541,10 +6541,6 @@ static struct kvmppc_ops kvm_ops_hv = {
 	.fast_vcpu_kick = kvmppc_fast_vcpu_kick_hv,
 	.arch_vm_ioctl  = kvm_arch_vm_ioctl_hv,
 	.hcall_implemented = kvmppc_hcall_impl_hv,
-#ifdef CONFIG_KVM_XICS
-	.irq_bypass_add_producer = kvmppc_irq_bypass_add_producer_hv,
-	.irq_bypass_del_producer = kvmppc_irq_bypass_del_producer_hv,
-#endif
 	.configure_mmu = kvmhv_configure_mmu,
 	.get_rmmu_info = kvmhv_get_rmmu_info,
 	.set_smt_mode = kvmhv_set_smt_mode,
@@ -6662,6 +6658,22 @@ static int kvmppc_book3s_init_hv(void)
 		return r;
 	}
 
+#if defined(CONFIG_KVM_XICS)
+	/*
+	 * IRQ bypass is supported only for interrupts whose EOI operations are
+	 * handled via OPAL calls. Therefore, register IRQ bypass handlers
+	 * exclusively for PowerNV KVM when booted with 'xive=off', indicating
+	 * the use of the emulated XICS interrupt controller.
+	 */
+	if (!kvmhv_on_pseries()) {
+		pr_info("KVM-HV: Enabling IRQ bypass\n");
+		kvm_ops_hv.irq_bypass_add_producer =
+			kvmppc_irq_bypass_add_producer_hv;
+		kvm_ops_hv.irq_bypass_del_producer =
+			kvmppc_irq_bypass_del_producer_hv;
+	}
+#endif
+
 	kvm_ops_hv.owner = THIS_MODULE;
 	kvmppc_hv_ops = &kvm_ops_hv;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c linux-libre-6.16-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
index e5c7ce1fb761..87691cf86cae 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/book3s_hv_nestedv2.c
@@ -123,6 +123,12 @@ static size_t gs_msg_ops_vcpu_get_size(struct kvmppc_gs_msg *gsm)
 		case KVMPPC_GSID_PROCESS_TABLE:
 		case KVMPPC_GSID_RUN_INPUT:
 		case KVMPPC_GSID_RUN_OUTPUT:
+		  /* Host wide counters */
+		case KVMPPC_GSID_L0_GUEST_HEAP:
+		case KVMPPC_GSID_L0_GUEST_HEAP_MAX:
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE:
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX:
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM:
 			break;
 		default:
 			size += kvmppc_gse_total_size(kvmppc_gsid_size(iden));
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/booke.c linux-libre-6.16-gnu/arch/powerpc/kvm/booke.c
index 6a4805968966..3401b96be475 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/booke.c
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/booke.c
@@ -572,7 +572,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
 
 /*
  * Return the number of jiffies until the next timeout.  If the timeout is
- * longer than the NEXT_TIMER_MAX_DELTA, then return NEXT_TIMER_MAX_DELTA
+ * longer than the TIMER_NEXT_MAX_DELTA, then return TIMER_NEXT_MAX_DELTA
  * because the larger value can break the timer APIs.
  */
 static unsigned long watchdog_next_timeout(struct kvm_vcpu *vcpu)
@@ -598,7 +598,7 @@ static unsigned long watchdog_next_timeout(struct kvm_vcpu *vcpu)
 	if (do_div(nr_jiffies, tb_ticks_per_jiffy))
 		nr_jiffies++;
 
-	return min_t(unsigned long long, nr_jiffies, NEXT_TIMER_MAX_DELTA);
+	return min_t(unsigned long long, nr_jiffies, TIMER_NEXT_MAX_DELTA);
 }
 
 static void arm_next_watchdog(struct kvm_vcpu *vcpu)
@@ -616,10 +616,10 @@ static void arm_next_watchdog(struct kvm_vcpu *vcpu)
 	spin_lock_irqsave(&vcpu->arch.wdt_lock, flags);
 	nr_jiffies = watchdog_next_timeout(vcpu);
 	/*
-	 * If the number of jiffies of watchdog timer >= NEXT_TIMER_MAX_DELTA
+	 * If the number of jiffies of watchdog timer >= TIMER_NEXT_MAX_DELTA
 	 * then do not run the watchdog timer as this can break timer APIs.
 	 */
-	if (nr_jiffies < NEXT_TIMER_MAX_DELTA)
+	if (nr_jiffies < TIMER_NEXT_MAX_DELTA)
 		mod_timer(&vcpu->arch.wdt_timer, jiffies + nr_jiffies);
 	else
 		timer_delete(&vcpu->arch.wdt_timer);
@@ -628,7 +628,7 @@ static void arm_next_watchdog(struct kvm_vcpu *vcpu)
 
 static void kvmppc_watchdog_func(struct timer_list *t)
 {
-	struct kvm_vcpu *vcpu = from_timer(vcpu, t, arch.wdt_timer);
+	struct kvm_vcpu *vcpu = timer_container_of(vcpu, t, arch.wdt_timer);
 	u32 tsr, new_tsr;
 	int final;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/guest-state-buffer.c linux-libre-6.16-gnu/arch/powerpc/kvm/guest-state-buffer.c
index b80dbc58621f..871cf60ddeb6 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/guest-state-buffer.c
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/guest-state-buffer.c
@@ -92,6 +92,10 @@ static int kvmppc_gsid_class(u16 iden)
 	    (iden <= KVMPPC_GSE_GUESTWIDE_END))
 		return KVMPPC_GS_CLASS_GUESTWIDE;
 
+	if ((iden >= KVMPPC_GSE_HOSTWIDE_START) &&
+	    (iden <= KVMPPC_GSE_HOSTWIDE_END))
+		return KVMPPC_GS_CLASS_HOSTWIDE;
+
 	if ((iden >= KVMPPC_GSE_META_START) && (iden <= KVMPPC_GSE_META_END))
 		return KVMPPC_GS_CLASS_META;
 
@@ -118,6 +122,21 @@ static int kvmppc_gsid_type(u16 iden)
 	int type = -1;
 
 	switch (kvmppc_gsid_class(iden)) {
+	case KVMPPC_GS_CLASS_HOSTWIDE:
+		switch (iden) {
+		case KVMPPC_GSID_L0_GUEST_HEAP:
+			fallthrough;
+		case KVMPPC_GSID_L0_GUEST_HEAP_MAX:
+			fallthrough;
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE:
+			fallthrough;
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX:
+			fallthrough;
+		case KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM:
+			type = KVMPPC_GSE_BE64;
+			break;
+		}
+		break;
 	case KVMPPC_GS_CLASS_GUESTWIDE:
 		switch (iden) {
 		case KVMPPC_GSID_HOST_STATE_SIZE:
@@ -187,6 +206,9 @@ unsigned long kvmppc_gsid_flags(u16 iden)
 	case KVMPPC_GS_CLASS_GUESTWIDE:
 		flags = KVMPPC_GS_FLAGS_WIDE;
 		break;
+	case KVMPPC_GS_CLASS_HOSTWIDE:
+		flags = KVMPPC_GS_FLAGS_HOST_WIDE;
+		break;
 	case KVMPPC_GS_CLASS_META:
 	case KVMPPC_GS_CLASS_DWORD_REG:
 	case KVMPPC_GS_CLASS_WORD_REG:
@@ -310,6 +332,13 @@ static inline int kvmppc_gse_flatten_iden(u16 iden)
 
 	bit += KVMPPC_GSE_GUESTWIDE_COUNT;
 
+	if (class == KVMPPC_GS_CLASS_HOSTWIDE) {
+		bit += iden - KVMPPC_GSE_HOSTWIDE_START;
+		return bit;
+	}
+
+	bit += KVMPPC_GSE_HOSTWIDE_COUNT;
+
 	if (class == KVMPPC_GS_CLASS_META) {
 		bit += iden - KVMPPC_GSE_META_START;
 		return bit;
@@ -356,6 +385,12 @@ static inline u16 kvmppc_gse_unflatten_iden(int bit)
 	}
 	bit -= KVMPPC_GSE_GUESTWIDE_COUNT;
 
+	if (bit < KVMPPC_GSE_HOSTWIDE_COUNT) {
+		iden = KVMPPC_GSE_HOSTWIDE_START + bit;
+		return iden;
+	}
+	bit -= KVMPPC_GSE_HOSTWIDE_COUNT;
+
 	if (bit < KVMPPC_GSE_META_COUNT) {
 		iden = KVMPPC_GSE_META_START + bit;
 		return iden;
@@ -588,6 +623,8 @@ int kvmppc_gsb_send(struct kvmppc_gs_buff *gsb, unsigned long flags)
 
 	if (flags & KVMPPC_GS_FLAGS_WIDE)
 		hflags |= H_GUEST_FLAGS_WIDE;
+	if (flags & KVMPPC_GS_FLAGS_HOST_WIDE)
+		hflags |= H_GUEST_FLAGS_HOST_WIDE;
 
 	rc = plpar_guest_set_state(hflags, gsb->guest_id, gsb->vcpu_id,
 				   __pa(gsb->hdr), gsb->capacity, &i);
@@ -613,6 +650,8 @@ int kvmppc_gsb_recv(struct kvmppc_gs_buff *gsb, unsigned long flags)
 
 	if (flags & KVMPPC_GS_FLAGS_WIDE)
 		hflags |= H_GUEST_FLAGS_WIDE;
+	if (flags & KVMPPC_GS_FLAGS_HOST_WIDE)
+		hflags |= H_GUEST_FLAGS_HOST_WIDE;
 
 	rc = plpar_guest_get_state(hflags, gsb->guest_id, gsb->vcpu_id,
 				   __pa(gsb->hdr), gsb->capacity, &i);
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/test-guest-state-buffer.c linux-libre-6.16-gnu/arch/powerpc/kvm/test-guest-state-buffer.c
index bfd225329a18..5ccca306997a 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/test-guest-state-buffer.c
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/test-guest-state-buffer.c
@@ -5,6 +5,7 @@
 #include <kunit/test.h>
 
 #include <asm/guest-state-buffer.h>
+#include <asm/kvm_ppc.h>
 
 static void test_creating_buffer(struct kunit *test)
 {
@@ -141,6 +142,16 @@ static void test_gs_bitmap(struct kunit *test)
 		i++;
 	}
 
+	for (u16 iden = KVMPPC_GSID_L0_GUEST_HEAP;
+	     iden <= KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM; iden++) {
+		kvmppc_gsbm_set(&gsbm, iden);
+		kvmppc_gsbm_set(&gsbm1, iden);
+		KUNIT_EXPECT_TRUE(test, kvmppc_gsbm_test(&gsbm, iden));
+		kvmppc_gsbm_clear(&gsbm, iden);
+		KUNIT_EXPECT_FALSE(test, kvmppc_gsbm_test(&gsbm, iden));
+		i++;
+	}
+
 	for (u16 iden = KVMPPC_GSID_RUN_INPUT; iden <= KVMPPC_GSID_VPA;
 	     iden++) {
 		kvmppc_gsbm_set(&gsbm, iden);
@@ -309,12 +320,215 @@ static void test_gs_msg(struct kunit *test)
 	kvmppc_gsm_free(gsm);
 }
 
+/* Test data struct for hostwide/L0 counters */
+struct kvmppc_gs_msg_test_hostwide_data {
+	u64 guest_heap;
+	u64 guest_heap_max;
+	u64 guest_pgtable_size;
+	u64 guest_pgtable_size_max;
+	u64 guest_pgtable_reclaim;
+};
+
+static size_t test_hostwide_get_size(struct kvmppc_gs_msg *gsm)
+
+{
+	size_t size = 0;
+	u16 ids[] = {
+		KVMPPC_GSID_L0_GUEST_HEAP,
+		KVMPPC_GSID_L0_GUEST_HEAP_MAX,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM
+	};
+
+	for (int i = 0; i < ARRAY_SIZE(ids); i++)
+		size += kvmppc_gse_total_size(kvmppc_gsid_size(ids[i]));
+	return size;
+}
+
+static int test_hostwide_fill_info(struct kvmppc_gs_buff *gsb,
+				   struct kvmppc_gs_msg *gsm)
+{
+	struct kvmppc_gs_msg_test_hostwide_data *data = gsm->data;
+
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_HEAP))
+		kvmppc_gse_put_u64(gsb, KVMPPC_GSID_L0_GUEST_HEAP,
+				   data->guest_heap);
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_HEAP_MAX))
+		kvmppc_gse_put_u64(gsb, KVMPPC_GSID_L0_GUEST_HEAP_MAX,
+				   data->guest_heap_max);
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE))
+		kvmppc_gse_put_u64(gsb, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE,
+				   data->guest_pgtable_size);
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX))
+		kvmppc_gse_put_u64(gsb, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX,
+				   data->guest_pgtable_size_max);
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM))
+		kvmppc_gse_put_u64(gsb, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM,
+				   data->guest_pgtable_reclaim);
+
+	return 0;
+}
+
+static int test_hostwide_refresh_info(struct kvmppc_gs_msg *gsm,
+				      struct kvmppc_gs_buff *gsb)
+{
+	struct kvmppc_gs_parser gsp = { 0 };
+	struct kvmppc_gs_msg_test_hostwide_data *data = gsm->data;
+	struct kvmppc_gs_elem *gse;
+	int rc;
+
+	rc = kvmppc_gse_parse(&gsp, gsb);
+	if (rc < 0)
+		return rc;
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP);
+	if (gse)
+		data->guest_heap = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+	if (gse)
+		data->guest_heap_max = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+	if (gse)
+		data->guest_pgtable_size = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+	if (gse)
+		data->guest_pgtable_size_max = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+	if (gse)
+		data->guest_pgtable_reclaim = kvmppc_gse_get_u64(gse);
+
+	return 0;
+}
+
+static struct kvmppc_gs_msg_ops gs_msg_test_hostwide_ops = {
+	.get_size = test_hostwide_get_size,
+	.fill_info = test_hostwide_fill_info,
+	.refresh_info = test_hostwide_refresh_info,
+};
+
+static void test_gs_hostwide_msg(struct kunit *test)
+{
+	struct kvmppc_gs_msg_test_hostwide_data test_data = {
+		.guest_heap = 0xdeadbeef,
+		.guest_heap_max = ~0ULL,
+		.guest_pgtable_size = 0xff,
+		.guest_pgtable_size_max = 0xffffff,
+		.guest_pgtable_reclaim = 0xdeadbeef,
+	};
+	struct kvmppc_gs_msg *gsm;
+	struct kvmppc_gs_buff *gsb;
+
+	gsm = kvmppc_gsm_new(&gs_msg_test_hostwide_ops, &test_data, GSM_SEND,
+			     GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, gsm);
+
+	gsb = kvmppc_gsb_new(kvmppc_gsm_size(gsm), 0, 0, GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, gsb);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_HEAP);
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+
+	kvmppc_gsm_fill_info(gsm, gsb);
+
+	memset(&test_data, 0, sizeof(test_data));
+
+	kvmppc_gsm_refresh_info(gsm, gsb);
+	KUNIT_EXPECT_EQ(test, test_data.guest_heap, 0xdeadbeef);
+	KUNIT_EXPECT_EQ(test, test_data.guest_heap_max, ~0ULL);
+	KUNIT_EXPECT_EQ(test, test_data.guest_pgtable_size, 0xff);
+	KUNIT_EXPECT_EQ(test, test_data.guest_pgtable_size_max, 0xffffff);
+	KUNIT_EXPECT_EQ(test, test_data.guest_pgtable_reclaim, 0xdeadbeef);
+
+	kvmppc_gsm_free(gsm);
+}
+
+/* Test if the H_GUEST_GET_STATE for hostwide counters works */
+static void test_gs_hostwide_counters(struct kunit *test)
+{
+	struct kvmppc_gs_msg_test_hostwide_data test_data;
+	struct kvmppc_gs_parser gsp = { 0 };
+
+	struct kvmppc_gs_msg *gsm;
+	struct kvmppc_gs_buff *gsb;
+	struct kvmppc_gs_elem *gse;
+	int rc;
+
+	if (!kvmhv_on_pseries())
+		kunit_skip(test, "This test need a kmv-hv guest");
+
+	gsm = kvmppc_gsm_new(&gs_msg_test_hostwide_ops, &test_data, GSM_SEND,
+			     GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, gsm);
+
+	gsb = kvmppc_gsb_new(kvmppc_gsm_size(gsm), 0, 0, GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, gsb);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_HEAP);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+
+	kvmppc_gsm_include(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+
+	kvmppc_gsm_fill_info(gsm, gsb);
+
+	/* With HOST_WIDE flags guestid and vcpuid will be ignored */
+	rc = kvmppc_gsb_recv(gsb, KVMPPC_GS_FLAGS_HOST_WIDE);
+	KUNIT_ASSERT_EQ(test, rc, 0);
+
+	/* Parse the guest state buffer is successful */
+	rc = kvmppc_gse_parse(&gsp, gsb);
+	KUNIT_ASSERT_EQ(test, rc, 0);
+
+	/* Parse the GSB and get the counters */
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP);
+	KUNIT_ASSERT_NOT_NULL_MSG(test, gse, "L0 Heap counter missing");
+	kunit_info(test, "Guest Heap Size=%llu bytes",
+		   kvmppc_gse_get_u64(gse));
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+	KUNIT_ASSERT_NOT_NULL_MSG(test, gse, "L0 Heap counter max missing");
+	kunit_info(test, "Guest Heap Size Max=%llu bytes",
+		   kvmppc_gse_get_u64(gse));
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+	KUNIT_ASSERT_NOT_NULL_MSG(test, gse, "L0 page-table size missing");
+	kunit_info(test, "Guest Page-table Size=%llu bytes",
+		   kvmppc_gse_get_u64(gse));
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+	KUNIT_ASSERT_NOT_NULL_MSG(test, gse, "L0 page-table size-max missing");
+	kunit_info(test, "Guest Page-table Size Max=%llu bytes",
+		   kvmppc_gse_get_u64(gse));
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+	KUNIT_ASSERT_NOT_NULL_MSG(test, gse, "L0 page-table reclaim size missing");
+	kunit_info(test, "Guest Page-table Reclaim Size=%llu bytes",
+		   kvmppc_gse_get_u64(gse));
+
+	kvmppc_gsm_free(gsm);
+	kvmppc_gsb_free(gsb);
+}
+
 static struct kunit_case guest_state_buffer_testcases[] = {
 	KUNIT_CASE(test_creating_buffer),
 	KUNIT_CASE(test_adding_element),
 	KUNIT_CASE(test_gs_bitmap),
 	KUNIT_CASE(test_gs_parsing),
 	KUNIT_CASE(test_gs_msg),
+	KUNIT_CASE(test_gs_hostwide_msg),
+	KUNIT_CASE(test_gs_hostwide_counters),
 	{}
 };
 
diff --git linux-libre-6.15-gnu/arch/powerpc/kvm/timing.h linux-libre-6.16-gnu/arch/powerpc/kvm/timing.h
index 45817ab82bb4..14b0e23f601f 100644
--- linux-libre-6.15-gnu/arch/powerpc/kvm/timing.h
+++ linux-libre-6.16-gnu/arch/powerpc/kvm/timing.h
@@ -38,11 +38,7 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {}
 static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
 {
 	/* type has to be known at build time for optimization */
-
-	/* The BUILD_BUG_ON below breaks in funny ways, commented out
-	 * for now ... -BenH
 	BUILD_BUG_ON(!__builtin_constant_p(type));
-	*/
 	switch (type) {
 	case EXT_INTR_EXITS:
 		vcpu->stat.ext_intr_exits++;
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/Makefile linux-libre-6.16-gnu/arch/powerpc/lib/Makefile
index dd8a4b52a0cc..481f968e42c7 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/lib/Makefile
@@ -3,6 +3,8 @@
 # Makefile for ppc-specific library files..
 #
 
+obj-y += crypto/
+
 CFLAGS_code-patching.o += -fno-stack-protector
 CFLAGS_feature-fixups.o += -fno-stack-protector
 
@@ -79,9 +81,9 @@ CFLAGS_xor_vmx.o += -mhard-float -maltivec $(call cc-option,-mabi=altivec)
 CFLAGS_xor_vmx.o += -isystem $(shell $(CC) -print-file-name=include)
 
 obj-$(CONFIG_CRC32_ARCH) += crc32-powerpc.o
-crc32-powerpc-y := crc32-glue.o crc32c-vpmsum_asm.o
+crc32-powerpc-y := crc32.o crc32c-vpmsum_asm.o
 
 obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-powerpc.o
-crc-t10dif-powerpc-y := crc-t10dif-glue.o crct10dif-vpmsum_asm.o
+crc-t10dif-powerpc-y := crc-t10dif.o crct10dif-vpmsum_asm.o
 
 obj-$(CONFIG_PPC64) += $(obj64-y)
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crc-t10dif-glue.c linux-libre-6.16-gnu/arch/powerpc/lib/crc-t10dif.c
similarity index 90%
rename from arch/powerpc/lib/crc-t10dif-glue.c
rename to arch/powerpc/lib/crc-t10dif.c
index f411b0120cc5..be23ded3a9df 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/crc-t10dif-glue.c
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crc-t10dif.c
@@ -6,22 +6,22 @@
  * [based on crc32c-vpmsum_glue.c]
  */
 
-#include <linux/crc-t10dif.h>
+#include <asm/switch_to.h>
 #include <crypto/internal/simd.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
 #include <linux/cpufeature.h>
-#include <asm/simd.h>
-#include <asm/switch_to.h>
+#include <linux/crc-t10dif.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
 
 #define VMX_ALIGN		16
 #define VMX_ALIGN_MASK		(VMX_ALIGN-1)
 
 #define VECTOR_BREAKPOINT	64
 
-static DEFINE_STATIC_KEY_FALSE(have_vec_crypto);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_vec_crypto);
 
 u32 __crct10dif_vpmsum(u32 crc, unsigned char const *p, size_t len);
 
@@ -71,7 +71,7 @@ static int __init crc_t10dif_powerpc_init(void)
 		static_branch_enable(&have_vec_crypto);
 	return 0;
 }
-arch_initcall(crc_t10dif_powerpc_init);
+subsys_initcall(crc_t10dif_powerpc_init);
 
 static void __exit crc_t10dif_powerpc_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crc32-vpmsum_core.S linux-libre-6.16-gnu/arch/powerpc/lib/crc-vpmsum-template.S
similarity index 100%
rename from arch/powerpc/lib/crc32-vpmsum_core.S
rename to arch/powerpc/lib/crc-vpmsum-template.S
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crc32-glue.c linux-libre-6.16-gnu/arch/powerpc/lib/crc32.c
similarity index 91%
rename from arch/powerpc/lib/crc32-glue.c
rename to arch/powerpc/lib/crc32.c
index dbd10f339183..0d9befb6e7b8 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/crc32-glue.c
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crc32.c
@@ -1,19 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
-#include <linux/crc32.h>
+#include <asm/switch_to.h>
 #include <crypto/internal/simd.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/cpufeature.h>
-#include <asm/simd.h>
-#include <asm/switch_to.h>
+#include <linux/crc32.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
 
 #define VMX_ALIGN		16
 #define VMX_ALIGN_MASK		(VMX_ALIGN-1)
 
 #define VECTOR_BREAKPOINT	512
 
-static DEFINE_STATIC_KEY_FALSE(have_vec_crypto);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_vec_crypto);
 
 u32 __crc32c_vpmsum(u32 crc, const u8 *p, size_t len);
 
@@ -72,7 +73,7 @@ static int __init crc32_powerpc_init(void)
 		static_branch_enable(&have_vec_crypto);
 	return 0;
 }
-arch_initcall(crc32_powerpc_init);
+subsys_initcall(crc32_powerpc_init);
 
 static void __exit crc32_powerpc_exit(void)
 {
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crc32c-vpmsum_asm.S linux-libre-6.16-gnu/arch/powerpc/lib/crc32c-vpmsum_asm.S
index bf442004ea1f..1b35c55cce0a 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/crc32c-vpmsum_asm.S
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crc32c-vpmsum_asm.S
@@ -839,4 +839,4 @@
 
 #define CRC_FUNCTION_NAME __crc32c_vpmsum
 #define REFLECT
-#include "crc32-vpmsum_core.S"
+#include "crc-vpmsum-template.S"
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crct10dif-vpmsum_asm.S linux-libre-6.16-gnu/arch/powerpc/lib/crct10dif-vpmsum_asm.S
index f0b93a0fe168..47a6266d89a8 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/crct10dif-vpmsum_asm.S
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crct10dif-vpmsum_asm.S
@@ -842,4 +842,4 @@
 	.octa 0x0000000000000000000000018bb70000
 
 #define CRC_FUNCTION_NAME __crct10dif_vpmsum
-#include "crc32-vpmsum_core.S"
+#include "crc-vpmsum-template.S"
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crypto/Kconfig linux-libre-6.16-gnu/arch/powerpc/lib/crypto/Kconfig
new file mode 100644
index 000000000000..3f9e1bbd9905
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CRYPTO_CHACHA20_P10
+	tristate
+	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
+	default CRYPTO_LIB_CHACHA
+	select CRYPTO_LIB_CHACHA_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+
+config CRYPTO_POLY1305_P10
+	tristate
+	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
+	depends on BROKEN # Needs to be fixed to work in softirq context
+	default CRYPTO_LIB_POLY1305
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	select CRYPTO_LIB_POLY1305_GENERIC
+
+config CRYPTO_SHA256_PPC_SPE
+	tristate
+	depends on SPE
+	default CRYPTO_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crypto/Makefile linux-libre-6.16-gnu/arch/powerpc/lib/crypto/Makefile
new file mode 100644
index 000000000000..27f231f8e334
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CRYPTO_CHACHA20_P10) += chacha-p10-crypto.o
+chacha-p10-crypto-y := chacha-p10-glue.o chacha-p10le-8x.o
+
+obj-$(CONFIG_CRYPTO_POLY1305_P10) += poly1305-p10-crypto.o
+poly1305-p10-crypto-y := poly1305-p10-glue.o poly1305-p10le_64.o
+
+obj-$(CONFIG_CRYPTO_SHA256_PPC_SPE) += sha256-ppc-spe.o
+sha256-ppc-spe-y := sha256.o sha256-spe-asm.o
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crypto/chacha-p10-glue.c linux-libre-6.16-gnu/arch/powerpc/lib/crypto/chacha-p10-glue.c
new file mode 100644
index 000000000000..fcd23c6f1590
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/chacha-p10-glue.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ChaCha stream cipher (P10 accelerated)
+ *
+ * Copyright 2023- IBM Corp. All rights reserved.
+ */
+
+#include <crypto/chacha.h>
+#include <crypto/internal/simd.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpufeature.h>
+#include <linux/sizes.h>
+#include <asm/simd.h>
+#include <asm/switch_to.h>
+
+asmlinkage void chacha_p10le_8x(const struct chacha_state *state, u8 *dst,
+				const u8 *src, unsigned int len, int nrounds);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_p10);
+
+static void vsx_begin(void)
+{
+	preempt_disable();
+	enable_kernel_vsx();
+}
+
+static void vsx_end(void)
+{
+	disable_kernel_vsx();
+	preempt_enable();
+}
+
+static void chacha_p10_do_8x(struct chacha_state *state, u8 *dst, const u8 *src,
+			     unsigned int bytes, int nrounds)
+{
+	unsigned int l = bytes & ~0x0FF;
+
+	if (l > 0) {
+		chacha_p10le_8x(state, dst, src, l, nrounds);
+		bytes -= l;
+		src += l;
+		dst += l;
+		state->x[12] += l / CHACHA_BLOCK_SIZE;
+	}
+
+	if (bytes > 0)
+		chacha_crypt_generic(state, dst, src, bytes, nrounds);
+}
+
+void hchacha_block_arch(const struct chacha_state *state,
+			u32 out[HCHACHA_OUT_WORDS], int nrounds)
+{
+	hchacha_block_generic(state, out, nrounds);
+}
+EXPORT_SYMBOL(hchacha_block_arch);
+
+void chacha_crypt_arch(struct chacha_state *state, u8 *dst, const u8 *src,
+		       unsigned int bytes, int nrounds)
+{
+	if (!static_branch_likely(&have_p10) || bytes <= CHACHA_BLOCK_SIZE ||
+	    !crypto_simd_usable())
+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
+
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		vsx_begin();
+		chacha_p10_do_8x(state, dst, src, todo, nrounds);
+		vsx_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
+}
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+bool chacha_is_arch_optimized(void)
+{
+	return static_key_enabled(&have_p10);
+}
+EXPORT_SYMBOL(chacha_is_arch_optimized);
+
+static int __init chacha_p10_init(void)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_31))
+		static_branch_enable(&have_p10);
+	return 0;
+}
+subsys_initcall(chacha_p10_init);
+
+static void __exit chacha_p10_exit(void)
+{
+}
+module_exit(chacha_p10_exit);
+
+MODULE_DESCRIPTION("ChaCha stream cipher (P10 accelerated)");
+MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com>");
+MODULE_LICENSE("GPL v2");
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/chacha-p10le-8x.S linux-libre-6.16-gnu/arch/powerpc/lib/crypto/chacha-p10le-8x.S
similarity index 98%
rename from arch/powerpc/crypto/chacha-p10le-8x.S
rename to arch/powerpc/lib/crypto/chacha-p10le-8x.S
index 17bedb66b822..b29562bd5d40 100644
--- linux-libre-6.15-gnu/arch/powerpc/crypto/chacha-p10le-8x.S
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/chacha-p10le-8x.S
@@ -7,9 +7,6 @@
 #===================================================================================
 # Written by Danny Tsen <dtsen@us.ibm.com>
 #
-# chacha_p10le_8x(u32 *state, byte *dst, const byte *src,
-#				 size_t len, int nrounds);
-#
 # do rounds,  8 quarter rounds
 # 1.  a += b; d ^= a; d <<<= 16;
 # 2.  c += d; b ^= c; b <<<= 12;
@@ -575,7 +572,8 @@
 .endm
 
 #
-# chacha20_p10le_8x(u32 *state, byte *dst, const byte *src, size_t len, int nrounds);
+# void chacha_p10le_8x(const struct chacha_state *state, u8 *dst, const u8 *src,
+#		       unsigned int len, int nrounds);
 #
 SYM_FUNC_START(chacha_p10le_8x)
 .align 5
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crypto/poly1305-p10-glue.c linux-libre-6.16-gnu/arch/powerpc/lib/crypto/poly1305-p10-glue.c
new file mode 100644
index 000000000000..3f1664a724b6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/poly1305-p10-glue.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Poly1305 authenticator algorithm, RFC7539.
+ *
+ * Copyright 2023- IBM Corp. All rights reserved.
+ */
+#include <asm/switch_to.h>
+#include <crypto/internal/poly1305.h>
+#include <linux/cpufeature.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unaligned.h>
+
+asmlinkage void poly1305_p10le_4blocks(struct poly1305_block_state *state, const u8 *m, u32 mlen);
+asmlinkage void poly1305_64s(struct poly1305_block_state *state, const u8 *m, u32 mlen, int highbit);
+asmlinkage void poly1305_emit_64(const struct poly1305_state *state, const u32 nonce[4], u8 digest[POLY1305_DIGEST_SIZE]);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_p10);
+
+static void vsx_begin(void)
+{
+	preempt_disable();
+	enable_kernel_vsx();
+}
+
+static void vsx_end(void)
+{
+	disable_kernel_vsx();
+	preempt_enable();
+}
+
+void poly1305_block_init_arch(struct poly1305_block_state *dctx,
+			      const u8 raw_key[POLY1305_BLOCK_SIZE])
+{
+	if (!static_key_enabled(&have_p10))
+		return poly1305_block_init_generic(dctx, raw_key);
+
+	dctx->h = (struct poly1305_state){};
+	dctx->core_r.key.r64[0] = get_unaligned_le64(raw_key + 0);
+	dctx->core_r.key.r64[1] = get_unaligned_le64(raw_key + 8);
+}
+EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
+
+void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
+			  unsigned int len, u32 padbit)
+{
+	if (!static_key_enabled(&have_p10))
+		return poly1305_blocks_generic(state, src, len, padbit);
+	vsx_begin();
+	if (len >= POLY1305_BLOCK_SIZE * 4) {
+		poly1305_p10le_4blocks(state, src, len);
+		src += len - (len % (POLY1305_BLOCK_SIZE * 4));
+		len %= POLY1305_BLOCK_SIZE * 4;
+	}
+	while (len >= POLY1305_BLOCK_SIZE) {
+		poly1305_64s(state, src, POLY1305_BLOCK_SIZE, padbit);
+		len -= POLY1305_BLOCK_SIZE;
+		src += POLY1305_BLOCK_SIZE;
+	}
+	vsx_end();
+}
+EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
+
+void poly1305_emit_arch(const struct poly1305_state *state,
+			u8 digest[POLY1305_DIGEST_SIZE],
+			const u32 nonce[4])
+{
+	if (!static_key_enabled(&have_p10))
+		return poly1305_emit_generic(state, digest, nonce);
+	poly1305_emit_64(state, nonce, digest);
+}
+EXPORT_SYMBOL_GPL(poly1305_emit_arch);
+
+bool poly1305_is_arch_optimized(void)
+{
+	return static_key_enabled(&have_p10);
+}
+EXPORT_SYMBOL(poly1305_is_arch_optimized);
+
+static int __init poly1305_p10_init(void)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_31))
+		static_branch_enable(&have_p10);
+	return 0;
+}
+subsys_initcall(poly1305_p10_init);
+
+static void __exit poly1305_p10_exit(void)
+{
+}
+module_exit(poly1305_p10_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Danny Tsen <dtsen@linux.ibm.com>");
+MODULE_DESCRIPTION("Optimized Poly1305 for P10");
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/poly1305-p10le_64.S linux-libre-6.16-gnu/arch/powerpc/lib/crypto/poly1305-p10le_64.S
similarity index 100%
rename from arch/powerpc/crypto/poly1305-p10le_64.S
rename to arch/powerpc/lib/crypto/poly1305-p10le_64.S
diff --git linux-libre-6.15-gnu/arch/powerpc/crypto/sha256-spe-asm.S linux-libre-6.16-gnu/arch/powerpc/lib/crypto/sha256-spe-asm.S
similarity index 100%
rename from arch/powerpc/crypto/sha256-spe-asm.S
rename to arch/powerpc/lib/crypto/sha256-spe-asm.S
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/crypto/sha256.c linux-libre-6.16-gnu/arch/powerpc/lib/crypto/sha256.c
new file mode 100644
index 000000000000..6b0f079587eb
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/lib/crypto/sha256.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SHA-256 Secure Hash Algorithm, SPE optimized
+ *
+ * Based on generic implementation. The assembler module takes care
+ * about the SPE registers so it can run from interrupt context.
+ *
+ * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
+ */
+
+#include <asm/switch_to.h>
+#include <crypto/internal/sha2.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+
+/*
+ * MAX_BYTES defines the number of bytes that are allowed to be processed
+ * between preempt_disable() and preempt_enable(). SHA256 takes ~2,000
+ * operations per 64 bytes. e500 cores can issue two arithmetic instructions
+ * per clock cycle using one 32/64 bit unit (SU1) and one 32 bit unit (SU2).
+ * Thus 1KB of input data will need an estimated maximum of 18,000 cycles.
+ * Headroom for cache misses included. Even with the low end model clocked
+ * at 667 MHz this equals to a critical time window of less than 27us.
+ *
+ */
+#define MAX_BYTES 1024
+
+extern void ppc_spe_sha256_transform(u32 *state, const u8 *src, u32 blocks);
+
+static void spe_begin(void)
+{
+	/* We just start SPE operations and will save SPE registers later. */
+	preempt_disable();
+	enable_kernel_spe();
+}
+
+static void spe_end(void)
+{
+	disable_kernel_spe();
+	/* reenable preemption */
+	preempt_enable();
+}
+
+void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
+{
+	do {
+		/* cut input data into smaller blocks */
+		u32 unit = min_t(size_t, nblocks,
+				 MAX_BYTES / SHA256_BLOCK_SIZE);
+
+		spe_begin();
+		ppc_spe_sha256_transform(state, data, unit);
+		spe_end();
+
+		data += unit * SHA256_BLOCK_SIZE;
+		nblocks -= unit;
+	} while (nblocks);
+}
+EXPORT_SYMBOL_GPL(sha256_blocks_arch);
+
+bool sha256_is_arch_optimized(void)
+{
+	return true;
+}
+EXPORT_SYMBOL_GPL(sha256_is_arch_optimized);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-256 Secure Hash Algorithm, SPE optimized");
diff --git linux-libre-6.15-gnu/arch/powerpc/lib/vmx-helper.c linux-libre-6.16-gnu/arch/powerpc/lib/vmx-helper.c
index 58ed6bd613a6..54340912398f 100644
--- linux-libre-6.15-gnu/arch/powerpc/lib/vmx-helper.c
+++ linux-libre-6.16-gnu/arch/powerpc/lib/vmx-helper.c
@@ -45,7 +45,7 @@ int exit_vmx_usercopy(void)
 	 * set and we are preemptible. The hack here is to schedule a
 	 * decrementer to fire here and reschedule for us if necessary.
 	 */
-	if (IS_ENABLED(CONFIG_PREEMPTION) && need_resched())
+	if (need_irq_preemption() && need_resched())
 		set_dec(1);
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/mm/book3s64/pgtable.c linux-libre-6.16-gnu/arch/powerpc/mm/book3s64/pgtable.c
index 8f7d41ce2ca1..0db01e10a3f8 100644
--- linux-libre-6.15-gnu/arch/powerpc/mm/book3s64/pgtable.c
+++ linux-libre-6.16-gnu/arch/powerpc/mm/book3s64/pgtable.c
@@ -269,11 +269,6 @@ pud_t pfn_pud(unsigned long pfn, pgprot_t pgprot)
 	return __pud_mkhuge(pud_set_protbits(__pud(pudv), pgprot));
 }
 
-pmd_t mk_pmd(struct page *page, pgprot_t pgprot)
-{
-	return pfn_pmd(page_to_pfn(page), pgprot);
-}
-
 pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
 	unsigned long pmdv;
@@ -422,7 +417,7 @@ static pmd_t *__alloc_for_pmdcache(struct mm_struct *mm)
 	ptdesc = pagetable_alloc(gfp, 0);
 	if (!ptdesc)
 		return NULL;
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
diff --git linux-libre-6.15-gnu/arch/powerpc/mm/fault.c linux-libre-6.16-gnu/arch/powerpc/mm/fault.c
index c156fe0d53c3..806c74e0d5ab 100644
--- linux-libre-6.15-gnu/arch/powerpc/mm/fault.c
+++ linux-libre-6.16-gnu/arch/powerpc/mm/fault.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/string_choices.h>
 #include <linux/types.h>
 #include <linux/pagemap.h>
 #include <linux/ptrace.h>
@@ -218,7 +219,7 @@ static bool bad_kernel_fault(struct pt_regs *regs, unsigned long error_code,
 	// Read/write fault blocked by KUAP is bad, it can never succeed.
 	if (bad_kuap_fault(regs, address, is_write)) {
 		pr_crit_ratelimited("Kernel attempted to %s user page (%lx) - exploit attempt? (uid: %d)\n",
-				    is_write ? "write" : "read", address,
+				    str_write_read(is_write), address,
 				    from_kuid(&init_user_ns, current_uid()));
 
 		// Fault on user outside of certain regions (eg. copy_tofrom_user()) is bad
@@ -625,7 +626,7 @@ static void __bad_page_fault(struct pt_regs *regs, int sig)
 	case INTERRUPT_DATA_STORAGE:
 	case INTERRUPT_H_DATA_STORAGE:
 		pr_alert("BUG: %s on %s at 0x%08lx\n", msg,
-			 is_write ? "write" : "read", regs->dar);
+			 str_write_read(is_write), regs->dar);
 		break;
 	case INTERRUPT_DATA_SEGMENT:
 		pr_alert("BUG: %s at 0x%08lx\n", msg, regs->dar);
diff --git linux-libre-6.15-gnu/arch/powerpc/mm/nohash/8xx.c linux-libre-6.16-gnu/arch/powerpc/mm/nohash/8xx.c
index 8b54f12d1889..ab1505cf42bf 100644
--- linux-libre-6.15-gnu/arch/powerpc/mm/nohash/8xx.c
+++ linux-libre-6.16-gnu/arch/powerpc/mm/nohash/8xx.c
@@ -54,20 +54,13 @@ static int __ref __early_map_kernel_hugepage(unsigned long va, phys_addr_t pa,
 {
 	pmd_t *pmdp = pmd_off_k(va);
 	pte_t *ptep;
-
-	if (WARN_ON(psize != MMU_PAGE_512K && psize != MMU_PAGE_8M))
-		return -EINVAL;
+	unsigned int shift = mmu_psize_to_shift(psize);
 
 	if (new) {
 		if (WARN_ON(slab_is_available()))
 			return -EINVAL;
 
-		if (psize == MMU_PAGE_512K) {
-			ptep = early_pte_alloc_kernel(pmdp, va);
-			/* The PTE should never be already present */
-			if (WARN_ON(pte_present(*ptep) && pgprot_val(prot)))
-				return -EINVAL;
-		} else {
+		if (psize == MMU_PAGE_8M) {
 			if (WARN_ON(!pmd_none(*pmdp) || !pmd_none(*(pmdp + 1))))
 				return -EINVAL;
 
@@ -78,20 +71,25 @@ static int __ref __early_map_kernel_hugepage(unsigned long va, phys_addr_t pa,
 			pmd_populate_kernel(&init_mm, pmdp + 1, ptep);
 
 			ptep = (pte_t *)pmdp;
+		} else {
+			ptep = early_pte_alloc_kernel(pmdp, va);
+			/* The PTE should never be already present */
+			if (WARN_ON(pte_present(*ptep) && pgprot_val(prot)))
+				return -EINVAL;
 		}
 	} else {
-		if (psize == MMU_PAGE_512K)
-			ptep = pte_offset_kernel(pmdp, va);
-		else
+		if (psize == MMU_PAGE_8M)
 			ptep = (pte_t *)pmdp;
+		else
+			ptep = pte_offset_kernel(pmdp, va);
 	}
 
 	if (WARN_ON(!ptep))
 		return -ENOMEM;
 
 	set_huge_pte_at(&init_mm, va, ptep,
-			pte_mkhuge(pfn_pte(pa >> PAGE_SHIFT, prot)),
-			1UL << mmu_psize_to_shift(psize));
+			arch_make_huge_pte(pfn_pte(pa >> PAGE_SHIFT, prot), shift, 0),
+			1UL << shift);
 
 	return 0;
 }
@@ -123,14 +121,18 @@ static int mmu_mapin_ram_chunk(unsigned long offset, unsigned long top,
 	unsigned long p = offset;
 	int err = 0;
 
-	WARN_ON(!IS_ALIGNED(offset, SZ_512K) || !IS_ALIGNED(top, SZ_512K));
+	WARN_ON(!IS_ALIGNED(offset, SZ_16K) || !IS_ALIGNED(top, SZ_16K));
 
+	for (; p < ALIGN(p, SZ_512K) && p < top && !err; p += SZ_16K, v += SZ_16K)
+		err = __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_16K, new);
 	for (; p < ALIGN(p, SZ_8M) && p < top && !err; p += SZ_512K, v += SZ_512K)
 		err = __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_512K, new);
 	for (; p < ALIGN_DOWN(top, SZ_8M) && p < top && !err; p += SZ_8M, v += SZ_8M)
 		err = __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_8M, new);
 	for (; p < ALIGN_DOWN(top, SZ_512K) && p < top && !err; p += SZ_512K, v += SZ_512K)
 		err = __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_512K, new);
+	for (; p < ALIGN_DOWN(top, SZ_16K) && p < top && !err; p += SZ_16K, v += SZ_16K)
+		err = __early_map_kernel_hugepage(v, p, prot, MMU_PAGE_16K, new);
 
 	if (!new)
 		flush_tlb_kernel_range(PAGE_OFFSET + v, PAGE_OFFSET + top);
diff --git linux-libre-6.15-gnu/arch/powerpc/mm/pgtable-frag.c linux-libre-6.16-gnu/arch/powerpc/mm/pgtable-frag.c
index 713268ccb1a0..77e55eac16e4 100644
--- linux-libre-6.15-gnu/arch/powerpc/mm/pgtable-frag.c
+++ linux-libre-6.16-gnu/arch/powerpc/mm/pgtable-frag.c
@@ -56,19 +56,17 @@ static pte_t *__alloc_for_ptecache(struct mm_struct *mm, int kernel)
 {
 	void *ret = NULL;
 	struct ptdesc *ptdesc;
+	gfp_t gfp = PGALLOC_GFP;
 
-	if (!kernel) {
-		ptdesc = pagetable_alloc(PGALLOC_GFP | __GFP_ACCOUNT, 0);
-		if (!ptdesc)
-			return NULL;
-		if (!pagetable_pte_ctor(ptdesc)) {
-			pagetable_free(ptdesc);
-			return NULL;
-		}
-	} else {
-		ptdesc = pagetable_alloc(PGALLOC_GFP, 0);
-		if (!ptdesc)
-			return NULL;
+	if (!kernel)
+		gfp |= __GFP_ACCOUNT;
+
+	ptdesc = pagetable_alloc(gfp, 0);
+	if (!ptdesc)
+		return NULL;
+	if (!pagetable_pte_ctor(mm, ptdesc)) {
+		pagetable_free(ptdesc);
+		return NULL;
 	}
 
 	atomic_set(&ptdesc->pt_frag_refcount, 1);
@@ -124,12 +122,10 @@ void pte_fragment_free(unsigned long *table, int kernel)
 
 	BUG_ON(atomic_read(&ptdesc->pt_frag_refcount) <= 0);
 	if (atomic_dec_and_test(&ptdesc->pt_frag_refcount)) {
-		if (kernel)
-			pagetable_free(ptdesc);
-		else if (folio_test_clear_active(ptdesc_folio(ptdesc)))
-			call_rcu(&ptdesc->pt_rcu_head, pte_free_now);
-		else
+		if (kernel || !folio_test_clear_active(ptdesc_folio(ptdesc)))
 			pte_free_now(&ptdesc->pt_rcu_head);
+		else
+			call_rcu(&ptdesc->pt_rcu_head, pte_free_now);
 	}
 }
 
diff --git linux-libre-6.15-gnu/arch/powerpc/mm/ptdump/ptdump.c linux-libre-6.16-gnu/arch/powerpc/mm/ptdump/ptdump.c
index 9dc239967b77..b2358d794855 100644
--- linux-libre-6.15-gnu/arch/powerpc/mm/ptdump/ptdump.c
+++ linux-libre-6.16-gnu/arch/powerpc/mm/ptdump/ptdump.c
@@ -298,6 +298,38 @@ static void populate_markers(void)
 #endif
 }
 
+static void note_page_pte(struct ptdump_state *pt_st, unsigned long addr, pte_t pte)
+{
+	note_page(pt_st, addr, 4, pte_val(pte));
+}
+
+static void note_page_pmd(struct ptdump_state *pt_st, unsigned long addr, pmd_t pmd)
+{
+	note_page(pt_st, addr, 3, pmd_val(pmd));
+}
+
+static void note_page_pud(struct ptdump_state *pt_st, unsigned long addr, pud_t pud)
+{
+	note_page(pt_st, addr, 2, pud_val(pud));
+}
+
+static void note_page_p4d(struct ptdump_state *pt_st, unsigned long addr, p4d_t p4d)
+{
+	note_page(pt_st, addr, 1, p4d_val(p4d));
+}
+
+static void note_page_pgd(struct ptdump_state *pt_st, unsigned long addr, pgd_t pgd)
+{
+	note_page(pt_st, addr, 0, pgd_val(pgd));
+}
+
+static void note_page_flush(struct ptdump_state *pt_st)
+{
+	pte_t pte_zero = {0};
+
+	note_page(pt_st, 0, -1, pte_val(pte_zero));
+}
+
 static int ptdump_show(struct seq_file *m, void *v)
 {
 	struct pg_state st = {
@@ -305,7 +337,12 @@ static int ptdump_show(struct seq_file *m, void *v)
 		.marker = address_markers,
 		.level = -1,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = ptdump_range,
 		}
 	};
@@ -338,7 +375,12 @@ bool ptdump_check_wx(void)
 		.level = -1,
 		.check_wx = true,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = ptdump_range,
 		}
 	};
diff --git linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit.h linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit.h
index 6beacaec63d3..4c26912c2e3c 100644
--- linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit.h
+++ linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit.h
@@ -51,8 +51,16 @@
 		EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc));					\
 	} while (0)
 
-/* Sign-extended 32-bit immediate load */
+/*
+ * Sign-extended 32-bit immediate load
+ *
+ * If this is a dummy pass (!image), account for
+ * maximum possible instructions.
+ */
 #define PPC_LI32(d, i)		do {					      \
+	if (!image)							      \
+		ctx->idx += 2;						      \
+	else {								      \
 		if ((int)(uintptr_t)(i) >= -32768 &&			      \
 				(int)(uintptr_t)(i) < 32768)		      \
 			EMIT(PPC_RAW_LI(d, i));				      \
@@ -60,10 +68,15 @@
 			EMIT(PPC_RAW_LIS(d, IMM_H(i)));			      \
 			if (IMM_L(i))					      \
 				EMIT(PPC_RAW_ORI(d, d, IMM_L(i)));	      \
-		} } while(0)
+		}							      \
+	} } while (0)
 
 #ifdef CONFIG_PPC64
+/* If dummy pass (!image), account for maximum possible instructions */
 #define PPC_LI64(d, i)		do {					      \
+	if (!image)							      \
+		ctx->idx += 5;						      \
+	else {								      \
 		if ((long)(i) >= -2147483648 &&				      \
 				(long)(i) < 2147483648)			      \
 			PPC_LI32(d, i);					      \
@@ -84,7 +97,8 @@
 			if ((uintptr_t)(i) & 0x000000000000ffffULL)	      \
 				EMIT(PPC_RAW_ORI(d, d, (uintptr_t)(i) &       \
 							0xffff));             \
-		} } while (0)
+		}							      \
+	} } while (0)
 #define PPC_LI_ADDR	PPC_LI64
 
 #ifndef CONFIG_PPC_KERNEL_PCREL
diff --git linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp.c linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp.c
index 2991bb171a9b..c0684733e9d6 100644
--- linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp.c
+++ linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp.c
@@ -504,10 +504,11 @@ static int invoke_bpf_prog(u32 *image, u32 *ro_image, struct codegen_context *ct
 	EMIT(PPC_RAW_ADDI(_R3, _R1, regs_off));
 	if (!p->jited)
 		PPC_LI_ADDR(_R4, (unsigned long)p->insnsi);
-	if (!create_branch(&branch_insn, (u32 *)&ro_image[ctx->idx], (unsigned long)p->bpf_func,
-			   BRANCH_SET_LINK)) {
-		if (image)
-			image[ctx->idx] = ppc_inst_val(branch_insn);
+	/* Account for max possible instructions during dummy pass for size calculation */
+	if (image && !create_branch(&branch_insn, (u32 *)&ro_image[ctx->idx],
+				    (unsigned long)p->bpf_func,
+				    BRANCH_SET_LINK)) {
+		image[ctx->idx] = ppc_inst_val(branch_insn);
 		ctx->idx++;
 	} else {
 		EMIT(PPC_RAW_LL(_R12, _R25, offsetof(struct bpf_prog, bpf_func)));
@@ -889,7 +890,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_im
 			bpf_trampoline_restore_tail_call_cnt(image, ctx, func_frame_offset, r4_off);
 
 		/* Reserve space to patch branch instruction to skip fexit progs */
-		im->ip_after_call = &((u32 *)ro_image)[ctx->idx];
+		if (ro_image) /* image is NULL for dummy pass */
+			im->ip_after_call = &((u32 *)ro_image)[ctx->idx];
 		EMIT(PPC_RAW_NOP());
 	}
 
@@ -912,7 +914,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_im
 		}
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
-		im->ip_epilogue = &((u32 *)ro_image)[ctx->idx];
+		if (ro_image) /* image is NULL for dummy pass */
+			im->ip_epilogue = &((u32 *)ro_image)[ctx->idx];
 		PPC_LI_ADDR(_R3, im);
 		ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx,
 						 (unsigned long)__bpf_tramp_exit);
@@ -973,25 +976,9 @@ int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
 			     struct bpf_tramp_links *tlinks, void *func_addr)
 {
 	struct bpf_tramp_image im;
-	void *image;
 	int ret;
 
-	/*
-	 * Allocate a temporary buffer for __arch_prepare_bpf_trampoline().
-	 * This will NOT cause fragmentation in direct map, as we do not
-	 * call set_memory_*() on this buffer.
-	 *
-	 * We cannot use kvmalloc here, because we need image to be in
-	 * module memory range.
-	 */
-	image = bpf_jit_alloc_exec(PAGE_SIZE);
-	if (!image)
-		return -ENOMEM;
-
-	ret = __arch_prepare_bpf_trampoline(&im, image, image + PAGE_SIZE, image,
-					    m, flags, tlinks, func_addr);
-	bpf_jit_free_exec(image);
-
+	ret = __arch_prepare_bpf_trampoline(&im, NULL, NULL, NULL, m, flags, tlinks, func_addr);
 	return ret;
 }
 
diff --git linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp32.c linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp32.c
index c4db278dae36..0aace304dfe1 100644
--- linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp32.c
+++ linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp32.c
@@ -313,7 +313,6 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		u64 func_addr;
 		u32 true_cond;
 		u32 tmp_idx;
-		int j;
 
 		if (i && (BPF_CLASS(code) == BPF_ALU64 || BPF_CLASS(code) == BPF_ALU) &&
 		    (BPF_CLASS(prevcode) == BPF_ALU64 || BPF_CLASS(prevcode) == BPF_ALU) &&
@@ -1099,13 +1098,8 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		 * 16 byte instruction that uses two 'struct bpf_insn'
 		 */
 		case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */
-			tmp_idx = ctx->idx;
 			PPC_LI32(dst_reg_h, (u32)insn[i + 1].imm);
 			PPC_LI32(dst_reg, (u32)insn[i].imm);
-			/* padding to allow full 4 instructions for later patching */
-			if (!image)
-				for (j = ctx->idx - tmp_idx; j < 4; j++)
-					EMIT(PPC_RAW_NOP());
 			/* Adjust for two bpf instructions */
 			addrs[++i] = ctx->idx * 4;
 			break;
diff --git linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp64.c linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp64.c
index 233703b06d7c..5daa77aee7f7 100644
--- linux-libre-6.15-gnu/arch/powerpc/net/bpf_jit_comp64.c
+++ linux-libre-6.16-gnu/arch/powerpc/net/bpf_jit_comp64.c
@@ -227,7 +227,14 @@ int bpf_jit_emit_func_call_rel(u32 *image, u32 *fimage, struct codegen_context *
 #ifdef CONFIG_PPC_KERNEL_PCREL
 	reladdr = func_addr - local_paca->kernelbase;
 
-	if (reladdr < (long)SZ_8G && reladdr >= -(long)SZ_8G) {
+	/*
+	 * If fimage is NULL (the initial pass to find image size),
+	 * account for the maximum no. of instructions possible.
+	 */
+	if (!fimage) {
+		ctx->idx += 7;
+		return 0;
+	} else if (reladdr < (long)SZ_8G && reladdr >= -(long)SZ_8G) {
 		EMIT(PPC_RAW_LD(_R12, _R13, offsetof(struct paca_struct, kernelbase)));
 		/* Align for subsequent prefix instruction */
 		if (!IS_ALIGNED((unsigned long)fimage + CTX_NIA(ctx), 8))
@@ -412,7 +419,6 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		u64 imm64;
 		u32 true_cond;
 		u32 tmp_idx;
-		int j;
 
 		/*
 		 * addrs[] maps a BPF bytecode address into a real offset from
@@ -1046,12 +1052,7 @@ emit_clear:
 		case BPF_LD | BPF_IMM | BPF_DW: /* dst = (u64) imm */
 			imm64 = ((u64)(u32) insn[i].imm) |
 				    (((u64)(u32) insn[i+1].imm) << 32);
-			tmp_idx = ctx->idx;
 			PPC_LI64(dst_reg, imm64);
-			/* padding to allow full 5 instructions for later patching */
-			if (!image)
-				for (j = ctx->idx - tmp_idx; j < 5; j++)
-					EMIT(PPC_RAW_NOP());
 			/* Adjust for two bpf instructions */
 			addrs[++i] = ctx->idx * 4;
 			break;
diff --git linux-libre-6.15-gnu/arch/powerpc/perf/Makefile linux-libre-6.16-gnu/arch/powerpc/perf/Makefile
index ac2cf58d62db..7f53fcb7495a 100644
--- linux-libre-6.15-gnu/arch/powerpc/perf/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/perf/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_HV_PERF_CTRS) += hv-24x7.o hv-gpci.o hv-common.o
 
 obj-$(CONFIG_VPA_PMU) += vpa-pmu.o
 
+obj-$(CONFIG_KVM_BOOK3S_HV_PMU) += kvm-hv-pmu.o
+
 obj-$(CONFIG_PPC_8xx) += 8xx-pmu.o
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
diff --git linux-libre-6.15-gnu/arch/powerpc/perf/core-book3s.c linux-libre-6.16-gnu/arch/powerpc/perf/core-book3s.c
index b906d28f74fd..8b0081441f85 100644
--- linux-libre-6.15-gnu/arch/powerpc/perf/core-book3s.c
+++ linux-libre-6.16-gnu/arch/powerpc/perf/core-book3s.c
@@ -2239,6 +2239,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			       struct pt_regs *regs)
 {
 	u64 period = event->hw.sample_period;
+	const u64 last_period = event->hw.last_period;
 	s64 prev, delta, left;
 	int record = 0;
 
@@ -2320,7 +2321,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	if (record) {
 		struct perf_sample_data data;
 
-		perf_sample_data_init(&data, ~0ULL, event->hw.last_period);
+		perf_sample_data_init(&data, ~0ULL, last_period);
 
 		if (event->attr.sample_type & PERF_SAMPLE_ADDR_TYPE)
 			perf_get_data_addr(event, regs, &data.addr);
@@ -2343,12 +2344,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			ppmu->get_mem_weight(&data.weight.full, event->attr.sample_type);
 			data.sample_flags |= PERF_SAMPLE_WEIGHT_TYPE;
 		}
-		if (perf_event_overflow(event, &data, regs))
-			power_pmu_stop(event, 0);
+		perf_event_overflow(event, &data, regs);
 	} else if (period) {
 		/* Account for interrupt in case of invalid SIAR */
-		if (perf_event_account_interrupt(event))
-			power_pmu_stop(event, 0);
+		perf_event_account_interrupt(event);
 	}
 }
 
diff --git linux-libre-6.15-gnu/arch/powerpc/perf/core-fsl-emb.c linux-libre-6.16-gnu/arch/powerpc/perf/core-fsl-emb.c
index 1a53ab08447c..7120ab20cbfe 100644
--- linux-libre-6.15-gnu/arch/powerpc/perf/core-fsl-emb.c
+++ linux-libre-6.16-gnu/arch/powerpc/perf/core-fsl-emb.c
@@ -590,6 +590,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			       struct pt_regs *regs)
 {
 	u64 period = event->hw.sample_period;
+	const u64 last_period = event->hw.last_period;
 	s64 prev, delta, left;
 	int record = 0;
 
@@ -632,10 +633,9 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	if (record) {
 		struct perf_sample_data data;
 
-		perf_sample_data_init(&data, 0, event->hw.last_period);
+		perf_sample_data_init(&data, 0, last_period);
 
-		if (perf_event_overflow(event, &data, regs))
-			fsl_emb_pmu_stop(event, 0);
+		perf_event_overflow(event, &data, regs);
 	}
 }
 
diff --git linux-libre-6.15-gnu/arch/powerpc/perf/kvm-hv-pmu.c linux-libre-6.16-gnu/arch/powerpc/perf/kvm-hv-pmu.c
new file mode 100644
index 000000000000..ae264c9080ef
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/perf/kvm-hv-pmu.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Description: PMUs specific to running nested KVM-HV guests
+ * on Book3S processors (specifically POWER9 and later).
+ */
+
+#define pr_fmt(fmt)  "kvmppc-pmu: " fmt
+
+#include "asm-generic/local64.h"
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ratelimit.h>
+#include <linux/kvm_host.h>
+#include <linux/gfp_types.h>
+#include <linux/pgtable.h>
+#include <linux/perf_event.h>
+#include <linux/spinlock_types.h>
+#include <linux/spinlock.h>
+
+#include <asm/types.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/pte-walk.h>
+#include <asm/reg.h>
+#include <asm/plpar_wrappers.h>
+#include <asm/firmware.h>
+
+#include "asm/guest-state-buffer.h"
+
+enum kvmppc_pmu_eventid {
+	KVMPPC_EVENT_HOST_HEAP,
+	KVMPPC_EVENT_HOST_HEAP_MAX,
+	KVMPPC_EVENT_HOST_PGTABLE,
+	KVMPPC_EVENT_HOST_PGTABLE_MAX,
+	KVMPPC_EVENT_HOST_PGTABLE_RECLAIM,
+	KVMPPC_EVENT_MAX,
+};
+
+#define KVMPPC_PMU_EVENT_ATTR(_name, _id) \
+	PMU_EVENT_ATTR_ID(_name, kvmppc_events_sysfs_show, _id)
+
+static ssize_t kvmppc_events_sysfs_show(struct device *dev,
+					struct device_attribute *attr,
+					char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+/* Holds the hostwide stats */
+static struct kvmppc_hostwide_stats {
+	u64 guest_heap;
+	u64 guest_heap_max;
+	u64 guest_pgtable_size;
+	u64 guest_pgtable_size_max;
+	u64 guest_pgtable_reclaim;
+} l0_stats;
+
+/* Protect access to l0_stats */
+static DEFINE_SPINLOCK(lock_l0_stats);
+
+/* GSB related structs needed to talk to L0 */
+static struct kvmppc_gs_msg *gsm_l0_stats;
+static struct kvmppc_gs_buff *gsb_l0_stats;
+static struct kvmppc_gs_parser gsp_l0_stats;
+
+static struct attribute *kvmppc_pmu_events_attr[] = {
+	KVMPPC_PMU_EVENT_ATTR(host_heap, KVMPPC_EVENT_HOST_HEAP),
+	KVMPPC_PMU_EVENT_ATTR(host_heap_max, KVMPPC_EVENT_HOST_HEAP_MAX),
+	KVMPPC_PMU_EVENT_ATTR(host_pagetable, KVMPPC_EVENT_HOST_PGTABLE),
+	KVMPPC_PMU_EVENT_ATTR(host_pagetable_max, KVMPPC_EVENT_HOST_PGTABLE_MAX),
+	KVMPPC_PMU_EVENT_ATTR(host_pagetable_reclaim, KVMPPC_EVENT_HOST_PGTABLE_RECLAIM),
+	NULL,
+};
+
+static const struct attribute_group kvmppc_pmu_events_group = {
+	.name = "events",
+	.attrs = kvmppc_pmu_events_attr,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-5");
+static struct attribute *kvmppc_pmu_format_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group kvmppc_pmu_format_group = {
+	.name = "format",
+	.attrs = kvmppc_pmu_format_attr,
+};
+
+static const struct attribute_group *kvmppc_pmu_attr_groups[] = {
+	&kvmppc_pmu_events_group,
+	&kvmppc_pmu_format_group,
+	NULL,
+};
+
+/*
+ * Issue the hcall to get the L0-host stats.
+ * Should be called with l0-stat lock held
+ */
+static int kvmppc_update_l0_stats(void)
+{
+	int rc;
+
+	/* With HOST_WIDE flags guestid and vcpuid will be ignored */
+	rc = kvmppc_gsb_recv(gsb_l0_stats, KVMPPC_GS_FLAGS_HOST_WIDE);
+	if (rc)
+		goto out;
+
+	/* Parse the guest state buffer is successful */
+	rc = kvmppc_gse_parse(&gsp_l0_stats, gsb_l0_stats);
+	if (rc)
+		goto out;
+
+	/* Update the l0 returned stats*/
+	memset(&l0_stats, 0, sizeof(l0_stats));
+	rc = kvmppc_gsm_refresh_info(gsm_l0_stats, gsb_l0_stats);
+
+out:
+	return rc;
+}
+
+/* Update the value of the given perf_event */
+static int kvmppc_pmu_event_update(struct perf_event *event)
+{
+	int rc;
+	u64 curr_val, prev_val;
+	unsigned long flags;
+	unsigned int config = event->attr.config;
+
+	/* Ensure no one else is modifying the l0_stats */
+	spin_lock_irqsave(&lock_l0_stats, flags);
+
+	rc = kvmppc_update_l0_stats();
+	if (!rc) {
+		switch (config) {
+		case KVMPPC_EVENT_HOST_HEAP:
+			curr_val = l0_stats.guest_heap;
+			break;
+		case KVMPPC_EVENT_HOST_HEAP_MAX:
+			curr_val = l0_stats.guest_heap_max;
+			break;
+		case KVMPPC_EVENT_HOST_PGTABLE:
+			curr_val = l0_stats.guest_pgtable_size;
+			break;
+		case KVMPPC_EVENT_HOST_PGTABLE_MAX:
+			curr_val = l0_stats.guest_pgtable_size_max;
+			break;
+		case KVMPPC_EVENT_HOST_PGTABLE_RECLAIM:
+			curr_val = l0_stats.guest_pgtable_reclaim;
+			break;
+		default:
+			rc = -ENOENT;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&lock_l0_stats, flags);
+
+	/* If no error than update the perf event */
+	if (!rc) {
+		prev_val = local64_xchg(&event->hw.prev_count, curr_val);
+		if (curr_val > prev_val)
+			local64_add(curr_val - prev_val, &event->count);
+	}
+
+	return rc;
+}
+
+static int kvmppc_pmu_event_init(struct perf_event *event)
+{
+	unsigned int config = event->attr.config;
+
+	pr_debug("%s: Event(%p) id=%llu cpu=%x on_cpu=%x config=%u",
+		 __func__, event, event->id, event->cpu,
+		 event->oncpu, config);
+
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	if (config >= KVMPPC_EVENT_MAX)
+		return -EINVAL;
+
+	local64_set(&event->hw.prev_count, 0);
+	local64_set(&event->count, 0);
+
+	return 0;
+}
+
+static void kvmppc_pmu_del(struct perf_event *event, int flags)
+{
+	kvmppc_pmu_event_update(event);
+}
+
+static int kvmppc_pmu_add(struct perf_event *event, int flags)
+{
+	if (flags & PERF_EF_START)
+		return kvmppc_pmu_event_update(event);
+	return 0;
+}
+
+static void kvmppc_pmu_read(struct perf_event *event)
+{
+	kvmppc_pmu_event_update(event);
+}
+
+/* Return the size of the needed guest state buffer */
+static size_t hostwide_get_size(struct kvmppc_gs_msg *gsm)
+
+{
+	size_t size = 0;
+	const u16 ids[] = {
+		KVMPPC_GSID_L0_GUEST_HEAP,
+		KVMPPC_GSID_L0_GUEST_HEAP_MAX,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX,
+		KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM
+	};
+
+	for (int i = 0; i < ARRAY_SIZE(ids); i++)
+		size += kvmppc_gse_total_size(kvmppc_gsid_size(ids[i]));
+	return size;
+}
+
+/* Populate the request guest state buffer */
+static int hostwide_fill_info(struct kvmppc_gs_buff *gsb,
+			      struct kvmppc_gs_msg *gsm)
+{
+	int rc = 0;
+	struct kvmppc_hostwide_stats  *stats = gsm->data;
+
+	/*
+	 * It doesn't matter what values are put into request buffer as
+	 * they are going to be overwritten anyways. But for the sake of
+	 * testcode and symmetry contents of existing stats are put
+	 * populated into the request guest state buffer.
+	 */
+	if (kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_HEAP))
+		rc = kvmppc_gse_put_u64(gsb,
+					KVMPPC_GSID_L0_GUEST_HEAP,
+					stats->guest_heap);
+
+	if (!rc && kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_HEAP_MAX))
+		rc = kvmppc_gse_put_u64(gsb,
+					KVMPPC_GSID_L0_GUEST_HEAP_MAX,
+					stats->guest_heap_max);
+
+	if (!rc && kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE))
+		rc = kvmppc_gse_put_u64(gsb,
+					KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE,
+					stats->guest_pgtable_size);
+	if (!rc &&
+	    kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX))
+		rc = kvmppc_gse_put_u64(gsb,
+					KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX,
+					stats->guest_pgtable_size_max);
+	if (!rc &&
+	    kvmppc_gsm_includes(gsm, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM))
+		rc = kvmppc_gse_put_u64(gsb,
+					KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM,
+					stats->guest_pgtable_reclaim);
+
+	return rc;
+}
+
+/* Parse and update the host wide stats from returned gsb */
+static int hostwide_refresh_info(struct kvmppc_gs_msg *gsm,
+				 struct kvmppc_gs_buff *gsb)
+{
+	struct kvmppc_gs_parser gsp = { 0 };
+	struct kvmppc_hostwide_stats *stats = gsm->data;
+	struct kvmppc_gs_elem *gse;
+	int rc;
+
+	rc = kvmppc_gse_parse(&gsp, gsb);
+	if (rc < 0)
+		return rc;
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP);
+	if (gse)
+		stats->guest_heap = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+	if (gse)
+		stats->guest_heap_max = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+	if (gse)
+		stats->guest_pgtable_size = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+	if (gse)
+		stats->guest_pgtable_size_max = kvmppc_gse_get_u64(gse);
+
+	gse = kvmppc_gsp_lookup(&gsp, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+	if (gse)
+		stats->guest_pgtable_reclaim = kvmppc_gse_get_u64(gse);
+
+	return 0;
+}
+
+/* gsb-message ops for setting up/parsing */
+static struct kvmppc_gs_msg_ops gsb_ops_l0_stats = {
+	.get_size = hostwide_get_size,
+	.fill_info = hostwide_fill_info,
+	.refresh_info = hostwide_refresh_info,
+};
+
+static int kvmppc_init_hostwide(void)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock_l0_stats, flags);
+
+	/* already registered ? */
+	if (gsm_l0_stats) {
+		rc = 0;
+		goto out;
+	}
+
+	/* setup the Guest state message/buffer to talk to L0 */
+	gsm_l0_stats = kvmppc_gsm_new(&gsb_ops_l0_stats, &l0_stats,
+				      GSM_SEND, GFP_KERNEL);
+	if (!gsm_l0_stats) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Populate the Idents */
+	kvmppc_gsm_include(gsm_l0_stats, KVMPPC_GSID_L0_GUEST_HEAP);
+	kvmppc_gsm_include(gsm_l0_stats, KVMPPC_GSID_L0_GUEST_HEAP_MAX);
+	kvmppc_gsm_include(gsm_l0_stats, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE);
+	kvmppc_gsm_include(gsm_l0_stats, KVMPPC_GSID_L0_GUEST_PGTABLE_SIZE_MAX);
+	kvmppc_gsm_include(gsm_l0_stats, KVMPPC_GSID_L0_GUEST_PGTABLE_RECLAIM);
+
+	/* allocate GSB. Guest/Vcpu Id is ignored */
+	gsb_l0_stats = kvmppc_gsb_new(kvmppc_gsm_size(gsm_l0_stats), 0, 0,
+				      GFP_KERNEL);
+	if (!gsb_l0_stats) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* ask the ops to fill in the info */
+	rc = kvmppc_gsm_fill_info(gsm_l0_stats, gsb_l0_stats);
+
+out:
+	if (rc) {
+		if (gsm_l0_stats)
+			kvmppc_gsm_free(gsm_l0_stats);
+		if (gsb_l0_stats)
+			kvmppc_gsb_free(gsb_l0_stats);
+		gsm_l0_stats = NULL;
+		gsb_l0_stats = NULL;
+	}
+	spin_unlock_irqrestore(&lock_l0_stats, flags);
+	return rc;
+}
+
+static void kvmppc_cleanup_hostwide(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock_l0_stats, flags);
+
+	if (gsm_l0_stats)
+		kvmppc_gsm_free(gsm_l0_stats);
+	if (gsb_l0_stats)
+		kvmppc_gsb_free(gsb_l0_stats);
+	gsm_l0_stats = NULL;
+	gsb_l0_stats = NULL;
+
+	spin_unlock_irqrestore(&lock_l0_stats, flags);
+}
+
+/* L1 wide counters PMU */
+static struct pmu kvmppc_pmu = {
+	.module = THIS_MODULE,
+	.task_ctx_nr = perf_sw_context,
+	.name = "kvm-hv",
+	.event_init = kvmppc_pmu_event_init,
+	.add = kvmppc_pmu_add,
+	.del = kvmppc_pmu_del,
+	.read = kvmppc_pmu_read,
+	.attr_groups = kvmppc_pmu_attr_groups,
+	.type = -1,
+	.scope = PERF_PMU_SCOPE_SYS_WIDE,
+	.capabilities = PERF_PMU_CAP_NO_EXCLUDE | PERF_PMU_CAP_NO_INTERRUPT,
+};
+
+static int __init kvmppc_register_pmu(void)
+{
+	int rc = -EOPNOTSUPP;
+
+	/* only support events for nestedv2 right now */
+	if (kvmhv_is_nestedv2()) {
+		rc = kvmppc_init_hostwide();
+		if (rc)
+			goto out;
+
+		/* Register the pmu */
+		rc = perf_pmu_register(&kvmppc_pmu, kvmppc_pmu.name, -1);
+		if (rc)
+			goto out;
+
+		pr_info("Registered kvm-hv pmu");
+	}
+
+out:
+	return rc;
+}
+
+static void __exit kvmppc_unregister_pmu(void)
+{
+	if (kvmhv_is_nestedv2()) {
+		kvmppc_cleanup_hostwide();
+
+		if (kvmppc_pmu.type != -1)
+			perf_pmu_unregister(&kvmppc_pmu);
+
+		pr_info("kvmhv_pmu unregistered.\n");
+	}
+}
+
+module_init(kvmppc_register_pmu);
+module_exit(kvmppc_unregister_pmu);
+MODULE_DESCRIPTION("KVM PPC Book3s-hv PMU");
+MODULE_AUTHOR("Vaibhav Jain <vaibhav@linux.ibm.com>");
+MODULE_LICENSE("GPL");
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/44x/gpio.c linux-libre-6.16-gnu/arch/powerpc/platforms/44x/gpio.c
index e5f2319e5cbe..d540e261d85a 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/44x/gpio.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/44x/gpio.c
@@ -75,8 +75,7 @@ __ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 		clrbits32(&regs->or, GPIO_MASK(gpio));
 }
 
-static void
-ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+static int ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
 	unsigned long flags;
@@ -88,6 +87,8 @@ ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
 }
 
 static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
@@ -179,7 +180,7 @@ static int __init ppc4xx_add_gpiochips(void)
 		gc->direction_input = ppc4xx_gpio_dir_in;
 		gc->direction_output = ppc4xx_gpio_dir_out;
 		gc->get = ppc4xx_gpio_get;
-		gc->set = ppc4xx_gpio_set;
+		gc->set_rv = ppc4xx_gpio_set;
 
 		ret = of_mm_gpiochip_add_data(np, mm_gc, ppc4xx_gc);
 		if (ret)
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/44x/uic.c linux-libre-6.16-gnu/arch/powerpc/platforms/44x/uic.c
index 31f760c2ec5d..85daf841fd3f 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/44x/uic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/44x/uic.c
@@ -254,8 +254,9 @@ static struct uic * __init uic_init_one(struct device_node *node)
 	}
 	uic->dcrbase = *dcrreg;
 
-	uic->irqhost = irq_domain_add_linear(node, NR_UIC_INTS, &uic_host_ops,
-					     uic);
+	uic->irqhost = irq_domain_create_linear(of_fwnode_handle(node),
+						NR_UIC_INTS, &uic_host_ops,
+						uic);
 	if (! uic->irqhost)
 		return NULL; /* FIXME: panic? */
 
@@ -327,5 +328,5 @@ unsigned int uic_get_irq(void)
 	msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
 	src = 32 - ffs(msr);
 
-	return irq_linear_revmap(primary_uic->irqhost, src);
+	return irq_find_mapping(primary_uic->irqhost, src);
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c linux-libre-6.16-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index e995eb30bf09..2cf3c6237337 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -188,7 +188,8 @@ mpc5121_ads_cpld_pic_init(void)
 
 	cpld_pic_node = of_node_get(np);
 
-	cpld_pic_host = irq_domain_add_linear(np, 16, &cpld_pic_host_ops, NULL);
+	cpld_pic_host = irq_domain_create_linear(of_fwnode_handle(np), 16,
+						 &cpld_pic_host_ops, NULL);
 	if (!cpld_pic_host) {
 		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
 		goto end;
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/media5200.c linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/media5200.c
index 19626cd42406..bc7f83cfec1d 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/media5200.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/media5200.c
@@ -168,7 +168,7 @@ static void __init media5200_init_irq(void)
 
 	spin_lock_init(&media5200_irq.lock);
 
-	media5200_irq.irqhost = irq_domain_add_linear(fpga_np,
+	media5200_irq.irqhost = irq_domain_create_linear(of_fwnode_handle(fpga_np),
 			MEDIA5200_NUM_IRQS, &media5200_irq_ops, &media5200_irq);
 	if (!media5200_irq.irqhost)
 		goto out;
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 1ea591ec6083..bda707d848a6 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -247,9 +247,9 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
 	if (!cascade_virq)
 		return;
 
-	gpt->irqhost = irq_domain_add_linear(node, 1, &mpc52xx_gpt_irq_ops, gpt);
+	gpt->irqhost = irq_domain_create_linear(of_fwnode_handle(node), 1, &mpc52xx_gpt_irq_ops, gpt);
 	if (!gpt->irqhost) {
-		dev_err(gpt->dev, "irq_domain_add_linear() failed\n");
+		dev_err(gpt->dev, "irq_domain_create_linear() failed\n");
 		return;
 	}
 
@@ -280,7 +280,7 @@ static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 	return (in_be32(&gpt->regs->status) >> 8) & 1;
 }
 
-static void
+static int
 mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v)
 {
 	struct mpc52xx_gpt_priv *gpt = gpiochip_get_data(gc);
@@ -293,6 +293,8 @@ mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v)
 	raw_spin_lock_irqsave(&gpt->lock, flags);
 	clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK, r);
 	raw_spin_unlock_irqrestore(&gpt->lock, flags);
+
+	return 0;
 }
 
 static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
@@ -334,7 +336,7 @@ static void mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt)
 	gpt->gc.direction_input  = mpc52xx_gpt_gpio_dir_in;
 	gpt->gc.direction_output = mpc52xx_gpt_gpio_dir_out;
 	gpt->gc.get = mpc52xx_gpt_gpio_get;
-	gpt->gc.set = mpc52xx_gpt_gpio_set;
+	gpt->gc.set_rv = mpc52xx_gpt_gpio_set;
 	gpt->gc.base = -1;
 	gpt->gc.parent = gpt->dev;
 
@@ -369,7 +371,7 @@ struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq)
 	mutex_lock(&mpc52xx_gpt_list_mutex);
 	list_for_each(pos, &mpc52xx_gpt_list) {
 		gpt = container_of(pos, struct mpc52xx_gpt_priv, list);
-		if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) {
+		if (gpt->irqhost && irq == irq_find_mapping(gpt->irqhost, 0)) {
 			mutex_unlock(&mpc52xx_gpt_list_mutex);
 			return gpt;
 		}
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/mpc52xx_pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 43c881d31ca6..eb6a4e745c08 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -446,7 +446,7 @@ void __init mpc52xx_init_irq(void)
 	 * As last step, add an irq host to translate the real
 	 * hw irq information provided by the ofw to linux virq
 	 */
-	mpc52xx_irqhost = irq_domain_add_linear(picnode,
+	mpc52xx_irqhost = irq_domain_create_linear(of_fwnode_handle(picnode),
 	                                 MPC52xx_IRQ_HIGHTESTHWIRQ,
 	                                 &mpc52xx_irqhost_ops, NULL);
 
@@ -515,5 +515,5 @@ unsigned int mpc52xx_get_irq(void)
 		return 0;
 	}
 
-	return irq_linear_revmap(mpc52xx_irqhost, irq);
+	return irq_find_mapping(mpc52xx_irqhost, irq);
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c linux-libre-6.16-gnu/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index 4d8fa9ed1a67..6e37dfc6c5c9 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -92,10 +92,11 @@ static void mcu_power_off(void)
 	mutex_unlock(&mcu->lock);
 }
 
-static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+static int mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct mcu *mcu = gpiochip_get_data(gc);
 	u8 bit = 1 << (4 + gpio);
+	int ret;
 
 	mutex_lock(&mcu->lock);
 	if (val)
@@ -103,14 +104,16 @@ static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 	else
 		mcu->reg_ctrl |= bit;
 
-	i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
+	ret = i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+					mcu->reg_ctrl);
 	mutex_unlock(&mcu->lock);
+
+	return ret;
 }
 
 static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
-	mcu_gpio_set(gc, gpio, val);
-	return 0;
+	return mcu_gpio_set(gc, gpio, val);
 }
 
 static int mcu_gpiochip_add(struct mcu *mcu)
@@ -123,7 +126,7 @@ static int mcu_gpiochip_add(struct mcu *mcu)
 	gc->can_sleep = 1;
 	gc->ngpio = MCU_NUM_GPIO;
 	gc->base = -1;
-	gc->set = mcu_gpio_set;
+	gc->set_rv = mcu_gpio_set;
 	gc->direction_output = mcu_gpio_dir_out;
 	gc->parent = dev;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 60e0b8947ce6..4b69fb321a68 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -83,7 +83,7 @@ static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
 		if (cause >> (i + 16))
 			break;
 	}
-	return irq_linear_revmap(socrates_fpga_pic_irq_host,
+	return irq_find_mapping(socrates_fpga_pic_irq_host,
 			(irq_hw_number_t)i);
 }
 
@@ -278,7 +278,7 @@ void __init socrates_fpga_pic_init(struct device_node *pic)
 	int i;
 
 	/* Setup an irq_domain structure */
-	socrates_fpga_pic_irq_host = irq_domain_add_linear(pic,
+	socrates_fpga_pic_irq_host = irq_domain_create_linear(of_fwnode_handle(pic),
 		    SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops, NULL);
 	if (socrates_fpga_pic_irq_host == NULL) {
 		pr_err("FPGA PIC: Unable to allocate host\n");
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/cpm1-ic.c linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/cpm1-ic.c
index a18fc7c99f83..a49d4a9ab3bc 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/cpm1-ic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/cpm1-ic.c
@@ -59,7 +59,7 @@ static int cpm_get_irq(struct irq_desc *desc)
 	cpm_vec = in_be16(&data->reg->cpic_civr);
 	cpm_vec >>= 11;
 
-	return irq_linear_revmap(data->host, cpm_vec);
+	return irq_find_mapping(data->host, cpm_vec);
 }
 
 static void cpm_cascade(struct irq_desc *desc)
@@ -110,7 +110,8 @@ static int cpm_pic_probe(struct platform_device *pdev)
 
 	out_be32(&data->reg->cpic_cimr, 0);
 
-	data->host = irq_domain_add_linear(dev->of_node, 64, &cpm_pic_host_ops, data);
+	data->host = irq_domain_create_linear(of_fwnode_handle(dev->of_node),
+					      64, &cpm_pic_host_ops, data);
 	if (!data->host)
 		return -ENODEV;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/cpm1.c linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/cpm1.c
index 1dc095ad48fc..7462c221115c 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/cpm1.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/cpm1.c
@@ -417,7 +417,7 @@ static void __cpm1_gpio16_set(struct cpm1_gpio16_chip *cpm1_gc, u16 pin_mask, in
 	out_be16(&iop->dat, cpm1_gc->cpdata);
 }
 
-static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static int cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(gc);
 	unsigned long flags;
@@ -428,6 +428,8 @@ static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
 	__cpm1_gpio16_set(cpm1_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
 }
 
 static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
@@ -497,7 +499,7 @@ int cpm1_gpiochip_add16(struct device *dev)
 	gc->direction_input = cpm1_gpio16_dir_in;
 	gc->direction_output = cpm1_gpio16_dir_out;
 	gc->get = cpm1_gpio16_get;
-	gc->set = cpm1_gpio16_set;
+	gc->set_rv = cpm1_gpio16_set;
 	gc->to_irq = cpm1_gpio16_to_irq;
 	gc->parent = dev;
 	gc->owner = THIS_MODULE;
@@ -554,7 +556,7 @@ static void __cpm1_gpio32_set(struct cpm1_gpio32_chip *cpm1_gc, u32 pin_mask, in
 	out_be32(&iop->dat, cpm1_gc->cpdata);
 }
 
-static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static int cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(gc);
 	unsigned long flags;
@@ -565,6 +567,8 @@ static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 	__cpm1_gpio32_set(cpm1_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
 }
 
 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -618,7 +622,7 @@ int cpm1_gpiochip_add32(struct device *dev)
 	gc->direction_input = cpm1_gpio32_dir_in;
 	gc->direction_output = cpm1_gpio32_dir_out;
 	gc->get = cpm1_gpio32_get;
-	gc->set = cpm1_gpio32_set;
+	gc->set_rv = cpm1_gpio32_set;
 	gc->parent = dev;
 	gc->owner = THIS_MODULE;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/pic.c
index ea6b0e523c60..933d6ab7f512 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/8xx/pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/8xx/pic.c
@@ -80,7 +80,7 @@ unsigned int mpc8xx_get_irq(void)
 	if (irq == PIC_VEC_SPURRIOUS)
 		return 0;
 
-        return irq_linear_revmap(mpc8xx_pic_host, irq);
+        return irq_find_mapping(mpc8xx_pic_host, irq);
 
 }
 
@@ -146,7 +146,8 @@ void __init mpc8xx_pic_init(void)
 	if (!siu_reg)
 		goto out;
 
-	mpc8xx_pic_host = irq_domain_add_linear(np, 64, &mpc8xx_pic_host_ops, NULL);
+	mpc8xx_pic_host = irq_domain_create_linear(of_fwnode_handle(np), 64,
+						   &mpc8xx_pic_host_ops, NULL);
 	if (!mpc8xx_pic_host)
 		printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/book3s/vas-api.c linux-libre-6.16-gnu/arch/powerpc/platforms/book3s/vas-api.c
index 0b6365d85d11..dc6f75d3ac6e 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/book3s/vas-api.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/book3s/vas-api.c
@@ -521,6 +521,15 @@ static int coproc_mmap(struct file *fp, struct vm_area_struct *vma)
 		return -EINVAL;
 	}
 
+	/*
+	 * Map complete page to the paste address. So the user
+	 * space should pass 0ULL to the offset parameter.
+	 */
+	if (vma->vm_pgoff) {
+		pr_debug("Page offset unsupported to map paste address\n");
+		return -EINVAL;
+	}
+
 	/* Ensure instance has an open send window */
 	if (!txwin) {
 		pr_err("No send window open?\n");
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/embedded6xx/flipper-pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index 013d66304c31..91a8f0a7086e 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -149,8 +149,9 @@ static struct irq_domain * __init flipper_pic_init(struct device_node *np)
 
 	__flipper_quiesce(io_base);
 
-	irq_domain = irq_domain_add_linear(np, FLIPPER_NR_IRQS,
-				  &flipper_irq_domain_ops, io_base);
+	irq_domain = irq_domain_create_linear(of_fwnode_handle(np),
+					      FLIPPER_NR_IRQS,
+					      &flipper_irq_domain_ops, io_base);
 	if (!irq_domain) {
 		pr_err("failed to allocate irq_domain\n");
 		return NULL;
@@ -172,7 +173,7 @@ unsigned int flipper_pic_get_irq(void)
 		return 0;	/* no more IRQs pending */
 
 	irq = __ffs(irq_status);
-	return irq_linear_revmap(flipper_irq_host, irq);
+	return irq_find_mapping(flipper_irq_host, irq);
 }
 
 /*
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/embedded6xx/hlwd-pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 4d2d92de30af..b57e87b0b3ce 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -175,8 +175,9 @@ static struct irq_domain *__init hlwd_pic_init(struct device_node *np)
 
 	__hlwd_quiesce(io_base);
 
-	irq_domain = irq_domain_add_linear(np, HLWD_NR_IRQS,
-					   &hlwd_irq_domain_ops, io_base);
+	irq_domain = irq_domain_create_linear(of_fwnode_handle(np),
+					      HLWD_NR_IRQS,
+					      &hlwd_irq_domain_ops, io_base);
 	if (!irq_domain) {
 		pr_err("failed to allocate irq_domain\n");
 		iounmap(io_base);
@@ -189,7 +190,7 @@ static struct irq_domain *__init hlwd_pic_init(struct device_node *np)
 unsigned int hlwd_pic_get_irq(void)
 {
 	unsigned int hwirq = __hlwd_pic_get_irq(hlwd_irq_host);
-	return hwirq ? irq_linear_revmap(hlwd_irq_host, hwirq) : 0;
+	return hwirq ? irq_find_mapping(hlwd_irq_host, hwirq) : 0;
 }
 
 /*
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/low_i2c.c linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/low_i2c.c
index a0ae58636e10..02474e27df9b 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/low_i2c.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/low_i2c.c
@@ -359,7 +359,8 @@ static irqreturn_t kw_i2c_irq(int irq, void *dev_id)
 
 static void kw_i2c_timeout(struct timer_list *t)
 {
-	struct pmac_i2c_host_kw *host = from_timer(host, t, timeout_timer);
+	struct pmac_i2c_host_kw *host = timer_container_of(host, t,
+							   timeout_timer);
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/pic.c linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/pic.c
index 03a7c51f2645..c37783a03d25 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/pic.c
@@ -250,7 +250,7 @@ static unsigned int pmac_pic_get_irq(void)
 	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	if (unlikely(irq < 0))
 		return 0;
-	return irq_linear_revmap(pmac_pic_host, irq);
+	return irq_find_mapping(pmac_pic_host, irq);
 }
 
 static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node,
@@ -327,8 +327,9 @@ static void __init pmac_pic_probe_oldstyle(void)
 	/*
 	 * Allocate an irq host
 	 */
-	pmac_pic_host = irq_domain_add_linear(master, max_irqs,
-					      &pmac_pic_host_ops, NULL);
+	pmac_pic_host = irq_domain_create_linear(of_fwnode_handle(master),
+						 max_irqs,
+						 &pmac_pic_host_ops, NULL);
 	BUG_ON(pmac_pic_host == NULL);
 	irq_set_default_domain(pmac_pic_host);
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/setup.c linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/setup.c
index 6de1cd5d8a58..e119ced05d10 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/setup.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/setup.c
@@ -45,6 +45,7 @@
 #include <linux/root_dev.h>
 #include <linux/bitops.h>
 #include <linux/suspend.h>
+#include <linux/string_choices.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
@@ -238,8 +239,7 @@ static void __init l2cr_init(void)
 				_set_L2CR(0);
 				_set_L2CR(*l2cr);
 				pr_info("L2CR overridden (0x%x), backside cache is %s\n",
-					*l2cr, ((*l2cr) & 0x80000000) ?
-					"enabled" : "disabled");
+					*l2cr, str_enabled_disabled((*l2cr) & 0x80000000));
 			}
 			of_node_put(np);
 			break;
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/smp.c linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/smp.c
index 09e7fe24fac1..88e92af8acf9 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/smp.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/smp.c
@@ -190,7 +190,7 @@ static int __init psurge_secondary_ipi_init(void)
 {
 	int rc = -ENOMEM;
 
-	psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL);
+	psurge_host = irq_domain_create_nomap(NULL, ~0, &psurge_host_ops, NULL);
 
 	if (psurge_host)
 		psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/time.c linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/time.c
index 8633891b7aa5..b4426a35aca3 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powermac/time.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powermac/time.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
+#include <linux/string_choices.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/time.h>
@@ -77,7 +78,7 @@ long __init pmac_time_init(void)
 		delta |= 0xFF000000UL;
 	dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
 	printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
-		dst ? "on" : "off");
+		str_on_off(dst));
 #endif
 	return delta;
 }
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/memtrace.c linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/memtrace.c
index 4ac9808e55a4..2ea30b343354 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/memtrace.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/memtrace.c
@@ -48,11 +48,15 @@ static ssize_t memtrace_read(struct file *filp, char __user *ubuf,
 static int memtrace_mmap(struct file *filp, struct vm_area_struct *vma)
 {
 	struct memtrace_entry *ent = filp->private_data;
+	unsigned long ent_nrpages = ent->size >> PAGE_SHIFT;
+	unsigned long vma_nrpages = vma_pages(vma);
 
-	if (ent->size < vma->vm_end - vma->vm_start)
+	/* The requested page offset should be within object's page count */
+	if (vma->vm_pgoff >= ent_nrpages)
 		return -EINVAL;
 
-	if (vma->vm_pgoff << PAGE_SHIFT >= ent->size)
+	/* The requested mapping range should remain within the bounds */
+	if (vma_nrpages > ent_nrpages - vma->vm_pgoff)
 		return -EINVAL;
 
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
index d92759c21fae..e180bd8e1400 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -191,7 +191,8 @@ int __init opal_event_init(void)
 	 * fall back to the legacy method (opal_event_request(...))
 	 * anyway. */
 	dn = of_find_compatible_node(NULL, NULL, "ibm,opal-event");
-	opal_event_irqchip.domain = irq_domain_add_linear(dn, MAX_NUM_EVENTS,
+	opal_event_irqchip.domain = irq_domain_create_linear(of_fwnode_handle(dn),
+				MAX_NUM_EVENTS,
 				&opal_event_domain_ops, &opal_event_irqchip);
 	of_node_put(dn);
 	if (!opal_event_irqchip.domain) {
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/pci-ioda.c linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
index ae4b549b5ca0..d8ccf2c9b98a 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1897,7 +1897,7 @@ static int __init pnv_msi_allocate_domains(struct pci_controller *hose, unsigned
 		return -ENOMEM;
 	}
 
-	hose->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(hose->dn),
+	hose->msi_domain = pci_msi_create_irq_domain(of_fwnode_handle(hose->dn),
 						     &pnv_msi_domain_info,
 						     hose->dev_domain);
 	if (!hose->msi_domain) {
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/ps3/device-init.c linux-libre-6.16-gnu/arch/powerpc/platforms/ps3/device-init.c
index 61722133eb2d..22d91ac424dd 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/ps3/device-init.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/ps3/device-init.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/reboot.h>
 #include <linux/rcuwait.h>
+#include <linux/string_choices.h>
 
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
@@ -724,7 +725,7 @@ static irqreturn_t ps3_notification_interrupt(int irq, void *data)
 static int ps3_notification_read_write(struct ps3_notification_device *dev,
 				       u64 lpar, int write)
 {
-	const char *op = write ? "write" : "read";
+	const char *op = str_write_read(write);
 	unsigned long flags;
 	int res;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/ps3/interrupt.c linux-libre-6.16-gnu/arch/powerpc/platforms/ps3/interrupt.c
index 95e96bd61a20..a4ad4b49eef7 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/ps3/interrupt.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/ps3/interrupt.c
@@ -743,7 +743,7 @@ void __init ps3_init_IRQ(void)
 	unsigned cpu;
 	struct irq_domain *host;
 
-	host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
+	host = irq_domain_create_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
 	irq_set_default_domain(host);
 
 	for_each_possible_cpu(cpu) {
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/Makefile linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/Makefile
index 3f3e3492e436..57222678bb3f 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/Makefile
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/Makefile
@@ -3,7 +3,8 @@ ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   of_helpers.o rtas-work-area.o papr-sysparm.o \
-			   papr-vpd.o \
+			   papr-rtas-common.o papr-vpd.o papr-indices.o \
+			   papr-platform-dump.o papr-phy-attest.o \
 			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o mobility.o rng.o \
 			   pci.o pci_dlpar.o eeh_pseries.o msi.o \
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/htmdump.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/htmdump.c
index 57fc1700f604..742ec52c9d4d 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/htmdump.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/htmdump.c
@@ -10,28 +10,40 @@
 #include <asm/io.h>
 #include <asm/machdep.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kvm_guest.h>
 
 static void *htm_buf;
+static void *htm_status_buf;
+static void *htm_info_buf;
+static void *htm_caps_buf;
 static u32 nodeindex;
 static u32 nodalchipindex;
 static u32 coreindexonchip;
 static u32 htmtype;
+static u32 htmconfigure;
+static u32 htmstart;
+static u32 htmsetup;
+static u64 htmflags;
+
 static struct dentry *htmdump_debugfs_dir;
+#define	HTM_ENABLE	1
+#define	HTM_DISABLE	0
+#define	HTM_NOWRAP	1
+#define	HTM_WRAP	0
 
-static ssize_t htmdump_read(struct file *filp, char __user *ubuf,
-			     size_t count, loff_t *ppos)
+/*
+ * Check the return code for H_HTM hcall.
+ * Return non-zero value (1) if either H_PARTIAL or H_SUCCESS
+ * is returned. For other return codes:
+ * Return zero if H_NOT_AVAILABLE.
+ * Return -EBUSY if hcall return busy.
+ * Return -EINVAL if any parameter or operation is not valid.
+ * Return -EPERM if HTM Virtualization Engine Technology code
+ * is not applied.
+ * Return -EIO if the HTM state is not valid.
+ */
+static ssize_t htm_return_check(long rc)
 {
-	void *htm_buf = filp->private_data;
-	unsigned long page, read_size, available;
-	loff_t offset;
-	long rc;
-
-	page = ALIGN_DOWN(*ppos, PAGE_SIZE);
-	offset = (*ppos) % PAGE_SIZE;
-
-	rc = htm_get_dump_hardware(nodeindex, nodalchipindex, coreindexonchip,
-				   htmtype, virt_to_phys(htm_buf), PAGE_SIZE, page);
-
 	switch (rc) {
 	case H_SUCCESS:
 	/* H_PARTIAL for the case where all available data can't be
@@ -65,6 +77,38 @@ static ssize_t htmdump_read(struct file *filp, char __user *ubuf,
 		return -EPERM;
 	}
 
+	/*
+	 * Return 1 for H_SUCCESS/H_PARTIAL
+	 */
+	return 1;
+}
+
+static ssize_t htmdump_read(struct file *filp, char __user *ubuf,
+			     size_t count, loff_t *ppos)
+{
+	void *htm_buf = filp->private_data;
+	unsigned long page, read_size, available;
+	loff_t offset;
+	long rc, ret;
+
+	page = ALIGN_DOWN(*ppos, PAGE_SIZE);
+	offset = (*ppos) % PAGE_SIZE;
+
+	/*
+	 * Invoke H_HTM call with:
+	 * - operation as htm dump (H_HTM_OP_DUMP_DATA)
+	 * - last three values are address, size and offset
+	 */
+	rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				   htmtype, H_HTM_OP_DUMP_DATA, virt_to_phys(htm_buf),
+				   PAGE_SIZE, page);
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed for op: H_HTM_OP_DUMP_DATA, returning %ld\n", ret);
+		return ret;
+	}
+
 	available = PAGE_SIZE;
 	read_size = min(count, available);
 	*ppos += read_size;
@@ -77,6 +121,292 @@ static const struct file_operations htmdump_fops = {
 	.open	= simple_open,
 };
 
+static int  htmconfigure_set(void *data, u64 val)
+{
+	long rc, ret;
+	unsigned long param1 = -1, param2 = -1;
+
+	/*
+	 * value as 1 : configure HTM.
+	 * value as 0 : deconfigure HTM. Return -EINVAL for
+	 * other values.
+	 */
+	if (val == HTM_ENABLE) {
+		/*
+		 * Invoke H_HTM call with:
+		 * - operation as htm configure (H_HTM_OP_CONFIGURE)
+		 * - If htmflags is set, param1 and param2 will be -1
+		 *   which is an indicator to use default htm mode reg mask
+		 *   and htm mode reg value.
+		 * - last three values are unused, hence set to zero
+		 */
+		if (!htmflags) {
+			param1 = 0;
+			param2 = 0;
+		}
+
+		rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+			   htmtype, H_HTM_OP_CONFIGURE, param1, param2, 0);
+	} else if (val == HTM_DISABLE) {
+		/*
+		 * Invoke H_HTM call with:
+		 * - operation as htm deconfigure (H_HTM_OP_DECONFIGURE)
+		 * - last three values are unused, hence set to zero
+		 */
+		rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				htmtype, H_HTM_OP_DECONFIGURE, 0, 0, 0);
+	} else
+		return -EINVAL;
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed, returning %ld\n", ret);
+		return ret;
+	}
+
+	/* Set htmconfigure if operation succeeds */
+	htmconfigure = val;
+
+	return 0;
+}
+
+static int htmconfigure_get(void *data, u64 *val)
+{
+	*val = htmconfigure;
+	return 0;
+}
+
+static int  htmstart_set(void *data, u64 val)
+{
+	long rc, ret;
+
+	/*
+	 * value as 1: start HTM
+	 * value as 0: stop HTM
+	 * Return -EINVAL for other values.
+	 */
+	if (val == HTM_ENABLE) {
+		/*
+		 * Invoke H_HTM call with:
+		 * - operation as htm start (H_HTM_OP_START)
+		 * - last three values are unused, hence set to zero
+		 */
+		rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+			   htmtype, H_HTM_OP_START, 0, 0, 0);
+
+	} else if (val == HTM_DISABLE) {
+		/*
+		 * Invoke H_HTM call with:
+		 * - operation as htm stop (H_HTM_OP_STOP)
+		 * - last three values are unused, hence set to zero
+		 */
+		rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				htmtype, H_HTM_OP_STOP, 0, 0, 0);
+	} else
+		return -EINVAL;
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed, returning %ld\n", ret);
+		return ret;
+	}
+
+	/* Set htmstart if H_HTM_OP_START/H_HTM_OP_STOP operation succeeds */
+	htmstart = val;
+
+	return 0;
+}
+
+static int htmstart_get(void *data, u64 *val)
+{
+	*val = htmstart;
+	return 0;
+}
+
+static ssize_t htmstatus_read(struct file *filp, char __user *ubuf,
+			     size_t count, loff_t *ppos)
+{
+	void *htm_status_buf = filp->private_data;
+	long rc, ret;
+	u64 *num_entries;
+	u64 to_copy;
+	int htmstatus_flag;
+
+	/*
+	 * Invoke H_HTM call with:
+	 * - operation as htm status (H_HTM_OP_STATUS)
+	 * - last three values as addr, size and offset
+	 */
+	rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				   htmtype, H_HTM_OP_STATUS, virt_to_phys(htm_status_buf),
+				   PAGE_SIZE, 0);
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed for op: H_HTM_OP_STATUS, returning %ld\n", ret);
+		return ret;
+	}
+
+	/*
+	 * HTM status buffer, start of buffer + 0x10 gives the
+	 * number of HTM entries in the buffer. Each nest htm status
+	 * entry is 0x6 bytes where each core htm status entry is
+	 * 0x8 bytes.
+	 * So total count to copy is:
+	 * 32 bytes (for first 7 fields) + (number of HTM entries * entry size)
+	 */
+	num_entries = htm_status_buf + 0x10;
+	if (htmtype == 0x2)
+		htmstatus_flag = 0x8;
+	else
+		htmstatus_flag = 0x6;
+	to_copy = 32 + (be64_to_cpu(*num_entries) * htmstatus_flag);
+	return simple_read_from_buffer(ubuf, count, ppos, htm_status_buf, to_copy);
+}
+
+static const struct file_operations htmstatus_fops = {
+	.llseek = NULL,
+	.read	= htmstatus_read,
+	.open	= simple_open,
+};
+
+static ssize_t htminfo_read(struct file *filp, char __user *ubuf,
+			     size_t count, loff_t *ppos)
+{
+	void *htm_info_buf = filp->private_data;
+	long rc, ret;
+	u64 *num_entries;
+	u64 to_copy;
+
+	/*
+	 * Invoke H_HTM call with:
+	 * - operation as htm status (H_HTM_OP_STATUS)
+	 * - last three values as addr, size and offset
+	 */
+	rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				   htmtype, H_HTM_OP_DUMP_SYSPROC_CONF, virt_to_phys(htm_info_buf),
+				   PAGE_SIZE, 0);
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed for op: H_HTM_OP_DUMP_SYSPROC_CONF, returning %ld\n", ret);
+		return ret;
+	}
+
+	/*
+	 * HTM status buffer, start of buffer + 0x10 gives the
+	 * number of HTM entries in the buffer. Each entry of processor
+	 * is 16 bytes.
+	 *
+	 * So total count to copy is:
+	 * 32 bytes (for first 5 fields) + (number of HTM entries * entry size)
+	 */
+	num_entries = htm_info_buf + 0x10;
+	to_copy = 32 + (be64_to_cpu(*num_entries) * 16);
+	return simple_read_from_buffer(ubuf, count, ppos, htm_info_buf, to_copy);
+}
+
+static ssize_t htmcaps_read(struct file *filp, char __user *ubuf,
+			     size_t count, loff_t *ppos)
+{
+	void *htm_caps_buf = filp->private_data;
+	long rc, ret;
+
+	/*
+	 * Invoke H_HTM call with:
+	 * - operation as htm capabilities (H_HTM_OP_CAPABILITIES)
+	 * - last three values as addr, size (0x80 for Capabilities Output Buffer
+	 *   and zero
+	 */
+	rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+				   htmtype, H_HTM_OP_CAPABILITIES, virt_to_phys(htm_caps_buf),
+				   0x80, 0);
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed for op: H_HTM_OP_CAPABILITIES, returning %ld\n", ret);
+		return ret;
+	}
+
+	return simple_read_from_buffer(ubuf, count, ppos, htm_caps_buf, 0x80);
+}
+
+static const struct file_operations htminfo_fops = {
+	.llseek = NULL,
+	.read   = htminfo_read,
+	.open   = simple_open,
+};
+
+static const struct file_operations htmcaps_fops = {
+	.llseek = NULL,
+	.read   = htmcaps_read,
+	.open   = simple_open,
+};
+
+static int  htmsetup_set(void *data, u64 val)
+{
+	long rc, ret;
+
+	/*
+	 * Input value: HTM buffer size in the power of 2
+	 * example: hex value 0x21 ( decimal: 33 ) is for
+	 * 8GB
+	 * Invoke H_HTM call with:
+	 * - operation as htm start (H_HTM_OP_SETUP)
+	 * - parameter 1 set to input value.
+	 * - last two values are unused, hence set to zero
+	 */
+	rc = htm_hcall_wrapper(htmflags, nodeindex, nodalchipindex, coreindexonchip,
+			htmtype, H_HTM_OP_SETUP, val, 0, 0);
+
+	ret = htm_return_check(rc);
+	if (ret <= 0) {
+		pr_debug("H_HTM hcall failed for op: H_HTM_OP_SETUP, returning %ld\n", ret);
+		return ret;
+	}
+
+	/* Set htmsetup if H_HTM_OP_SETUP operation succeeds */
+	htmsetup = val;
+
+	return 0;
+}
+
+static int htmsetup_get(void *data, u64 *val)
+{
+	*val = htmsetup;
+	return 0;
+}
+
+static int  htmflags_set(void *data, u64 val)
+{
+	/*
+	 * Input value:
+	 * Currently supported flag value is to enable/disable
+	 * HTM buffer wrap. wrap is used along with "configure"
+	 * to prevent HTM buffer from wrapping.
+	 * Writing 1 will set noWrap while configuring HTM
+	 */
+	if (val == HTM_NOWRAP)
+		htmflags = H_HTM_FLAGS_NOWRAP;
+	else if (val == HTM_WRAP)
+		htmflags = 0;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int htmflags_get(void *data, u64 *val)
+{
+	*val = htmflags;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(htmconfigure_fops, htmconfigure_get, htmconfigure_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(htmstart_fops, htmstart_get, htmstart_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(htmsetup_fops, htmsetup_get, htmsetup_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(htmflags_fops, htmflags_get, htmflags_set, "%llu\n");
+
 static int htmdump_init_debugfs(void)
 {
 	htm_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
@@ -98,11 +428,50 @@ static int htmdump_init_debugfs(void)
 			htmdump_debugfs_dir, &htmtype);
 	debugfs_create_file("trace", 0400, htmdump_debugfs_dir, htm_buf, &htmdump_fops);
 
+	/*
+	 * Debugfs interface files to control HTM operations:
+	 */
+	debugfs_create_file("htmconfigure", 0600, htmdump_debugfs_dir, NULL, &htmconfigure_fops);
+	debugfs_create_file("htmstart", 0600, htmdump_debugfs_dir, NULL, &htmstart_fops);
+	debugfs_create_file("htmsetup", 0600, htmdump_debugfs_dir, NULL, &htmsetup_fops);
+	debugfs_create_file("htmflags", 0600, htmdump_debugfs_dir, NULL, &htmflags_fops);
+
+	/* Debugfs interface file to present status of HTM */
+	htm_status_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!htm_status_buf) {
+		pr_err("Failed to allocate htmstatus buf\n");
+		return -ENOMEM;
+	}
+
+	/* Debugfs interface file to present System Processor Configuration */
+	htm_info_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!htm_info_buf) {
+		pr_err("Failed to allocate htm info buf\n");
+		return -ENOMEM;
+	}
+
+	/* Debugfs interface file to present HTM capabilities */
+	htm_caps_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!htm_caps_buf) {
+		pr_err("Failed to allocate htm caps buf\n");
+		return -ENOMEM;
+	}
+
+	debugfs_create_file("htmstatus", 0400, htmdump_debugfs_dir, htm_status_buf, &htmstatus_fops);
+	debugfs_create_file("htminfo", 0400, htmdump_debugfs_dir, htm_info_buf, &htminfo_fops);
+	debugfs_create_file("htmcaps", 0400, htmdump_debugfs_dir, htm_caps_buf, &htmcaps_fops);
+
 	return 0;
 }
 
 static int __init htmdump_init(void)
 {
+	/* Disable on kvm guest */
+	if (is_kvm_guest()) {
+		pr_info("htmdump not supported inside KVM guest\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (htmdump_init_debugfs())
 		return -ENOMEM;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/iommu.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/iommu.c
index d6ebc19fb99c..eec333dd2e59 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/iommu.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/iommu.c
@@ -197,7 +197,7 @@ static void tce_iommu_userspace_view_free(struct iommu_table *tbl)
 
 static void tce_free_pSeries(struct iommu_table *tbl)
 {
-	if (!tbl->it_userspace)
+	if (tbl->it_userspace)
 		tce_iommu_userspace_view_free(tbl);
 }
 
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/msi.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/msi.c
index f9d80111c322..ee1c8c6898a3 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/msi.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/msi.c
@@ -525,7 +525,12 @@ static struct msi_domain_info pseries_msi_domain_info = {
 
 static void pseries_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
 {
-	__pci_read_msi_msg(irq_data_get_msi_desc(data), msg);
+	struct pci_dev *dev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data));
+
+	if (dev->current_state == PCI_D0)
+		__pci_read_msi_msg(irq_data_get_msi_desc(data), msg);
+	else
+		get_cached_msi_msg(data->irq, msg);
 }
 
 static struct irq_chip pseries_msi_irq_chip = {
@@ -628,7 +633,7 @@ static int __pseries_msi_allocate_domains(struct pci_controller *phb,
 		return -ENOMEM;
 	}
 
-	phb->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(phb->dn),
+	phb->msi_domain = pci_msi_create_irq_domain(of_fwnode_handle(phb->dn),
 						    &pseries_msi_domain_info,
 						    phb->dev_domain);
 	if (!phb->msi_domain) {
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-indices.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-indices.c
new file mode 100644
index 000000000000..3c7545591c45
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-indices.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-indices: " fmt
+
+#include <linux/build_bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/lockdep.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/string_helpers.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
+#include <uapi/asm/papr-indices.h>
+#include "papr-rtas-common.h"
+
+/*
+ * Function-specific return values for ibm,set-dynamic-indicator and
+ * ibm,get-dynamic-sensor-state RTAS calls.
+ * PAPR+ v2.13 7.3.18 and 7.3.19.
+ */
+#define RTAS_IBM_DYNAMIC_INDICE_NO_INDICATOR	-3
+
+/**
+ * struct rtas_get_indices_params - Parameters (in and out) for
+ *                                      ibm,get-indices.
+ * @is_sensor:	In: Caller-provided whether sensor or indicator.
+ * @indice_type:In: Caller-provided indice (sensor or indicator) token
+ * @work_area:	In: Caller-provided work area buffer for results.
+ * @next:	In: Sequence number. Out: Next sequence number.
+ * @status:	Out: RTAS call status.
+ */
+struct rtas_get_indices_params {
+	u8 is_sensor;
+	u32 indice_type;
+	struct rtas_work_area *work_area;
+	u32 next;
+	s32 status;
+};
+
+/*
+ * rtas_ibm_get_indices() - Call ibm,get-indices to fill a work area buffer.
+ * @params: See &struct rtas_ibm_get_indices_params.
+ *
+ * Calls ibm,get-indices until it errors or successfully deposits data
+ * into the supplied work area. Handles RTAS retry statuses. Maps RTAS
+ * error statuses to reasonable errno values.
+ *
+ * The caller is expected to invoke rtas_ibm_get_indices() multiple times
+ * to retrieve all indices data for the provided indice type. Only one
+ * sequence should be in progress at any time; starting a new sequence
+ * will disrupt any sequence already in progress. Serialization of
+ * indices retrieval sequences is the responsibility of the caller.
+ *
+ * The caller should inspect @params.status to determine whether more
+ * calls are needed to complete the sequence.
+ *
+ * Context: May sleep.
+ * Return: -ve on error, 0 otherwise.
+ */
+static int rtas_ibm_get_indices(struct rtas_get_indices_params *params)
+{
+	struct rtas_work_area *work_area = params->work_area;
+	const s32 token = rtas_function_token(RTAS_FN_IBM_GET_INDICES);
+	u32 rets;
+	s32 fwrc;
+	int ret;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	lockdep_assert_held(&rtas_ibm_get_indices_lock);
+
+	do {
+		fwrc = rtas_call(token, 5, 2, &rets, params->is_sensor,
+				params->indice_type,
+				rtas_work_area_phys(work_area),
+				rtas_work_area_size(work_area),
+				params->next);
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER: /* Indicator type is not supported */
+		ret = -EINVAL;
+		break;
+	case RTAS_SEQ_START_OVER:
+		ret = -EAGAIN;
+		pr_info_ratelimited("Indices changed during retrieval, retrying\n");
+		params->next = 1;
+		break;
+	case RTAS_SEQ_MORE_DATA:
+		params->next = rets;
+		ret = 0;
+		break;
+	case RTAS_SEQ_COMPLETE:
+		params->next = 0;
+		ret = 0;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,get-indices status %d\n", fwrc);
+		break;
+	}
+
+	params->status = fwrc;
+	return ret;
+}
+
+/*
+ * Internal indices sequence APIs. A sequence is a series of calls to
+ * ibm,get-indices for a given location code. The sequence ends when
+ * an error is encountered or all indices for the input has been
+ * returned.
+ */
+
+/*
+ * indices_sequence_begin() - Begin a indices retrieval sequence.
+ *
+ * Context: May sleep.
+ */
+static void indices_sequence_begin(struct papr_rtas_sequence *seq)
+{
+	struct rtas_get_indices_params  *param;
+
+	param = (struct rtas_get_indices_params *)seq->params;
+	/*
+	 * We could allocate the work area before acquiring the
+	 * function lock, but that would allow concurrent requests to
+	 * exhaust the limited work area pool for no benefit. So
+	 * allocate the work area under the lock.
+	 */
+	mutex_lock(&rtas_ibm_get_indices_lock);
+	param->work_area = rtas_work_area_alloc(RTAS_GET_INDICES_BUF_SIZE);
+	param->next = 1;
+	param->status = 0;
+}
+
+/*
+ * indices_sequence_end() - Finalize a indices retrieval sequence.
+ *
+ * Releases resources obtained by indices_sequence_begin().
+ */
+static void indices_sequence_end(struct papr_rtas_sequence *seq)
+{
+	struct rtas_get_indices_params *param;
+
+	param =  (struct rtas_get_indices_params *)seq->params;
+	rtas_work_area_free(param->work_area);
+	mutex_unlock(&rtas_ibm_get_indices_lock);
+}
+
+/*
+ * Work function to be passed to papr_rtas_blob_generate().
+ *
+ * ibm,get-indices RTAS call fills the work area with the certain
+ * format but does not return the bytes written in the buffer. So
+ * instead of kernel parsing this work area to determine the buffer
+ * length, copy the complete work area (RTAS_GET_INDICES_BUF_SIZE)
+ * to the blob and let the user space to obtain the data.
+ * Means RTAS_GET_INDICES_BUF_SIZE data will be returned for each
+ * read().
+ */
+
+static const char *indices_sequence_fill_work_area(struct papr_rtas_sequence *seq,
+						size_t *len)
+{
+	struct rtas_get_indices_params *p;
+	bool init_state;
+
+	p = (struct rtas_get_indices_params *)seq->params;
+	init_state = (p->next == 1) ? true : false;
+
+	if (papr_rtas_sequence_should_stop(seq, p->status, init_state))
+		return NULL;
+	if (papr_rtas_sequence_set_err(seq, rtas_ibm_get_indices(p)))
+		return NULL;
+
+	*len = RTAS_GET_INDICES_BUF_SIZE;
+	return rtas_work_area_raw_buf(p->work_area);
+}
+
+/*
+ * papr_indices_handle_read - returns indices blob data to the user space
+ *
+ * ibm,get-indices RTAS call fills the work area with the certian
+ * format but does not return the bytes written in the buffer and
+ * copied RTAS_GET_INDICES_BUF_SIZE data to the blob for each RTAS
+ * call. So send RTAS_GET_INDICES_BUF_SIZE buffer to the user space
+ * for each read().
+ */
+static ssize_t papr_indices_handle_read(struct file *file,
+		char __user *buf, size_t size, loff_t *off)
+{
+	const struct papr_rtas_blob *blob = file->private_data;
+
+	/* we should not instantiate a handle without any data attached. */
+	if (!papr_rtas_blob_has_data(blob)) {
+		pr_err_once("handle without data\n");
+		return -EIO;
+	}
+
+	if (size < RTAS_GET_INDICES_BUF_SIZE) {
+		pr_err_once("Invalid buffer length %ld, expect %d\n",
+				size, RTAS_GET_INDICES_BUF_SIZE);
+		return -EINVAL;
+	} else if (size > RTAS_GET_INDICES_BUF_SIZE)
+		size = RTAS_GET_INDICES_BUF_SIZE;
+
+	return simple_read_from_buffer(buf, size, off, blob->data, blob->len);
+}
+
+static const struct file_operations papr_indices_handle_ops = {
+	.read = papr_indices_handle_read,
+	.llseek = papr_rtas_common_handle_seek,
+	.release = papr_rtas_common_handle_release,
+};
+
+/*
+ * papr_indices_create_handle() - Create a fd-based handle for reading
+ *                                indices data
+ * @ubuf: Input parameters to RTAS call such as whether sensor or indicator
+ *        and indice type in user memory
+ *
+ * Handler for PAPR_INDICES_IOC_GET ioctl command. Validates @ubuf
+ * and instantiates an immutable indices "blob" for it. The blob is
+ * attached to a file descriptor for reading by user space. The memory
+ * backing the blob is freed when the file is released.
+ *
+ * The entire requested indices is retrieved by this call and all
+ * necessary RTAS interactions are performed before returning the fd
+ * to user space. This keeps the read handler simple and ensures that
+ * the kernel can prevent interleaving of ibm,get-indices call sequences.
+ *
+ * Return: The installed fd number if successful, -ve errno otherwise.
+ */
+static long papr_indices_create_handle(struct papr_indices_io_block __user *ubuf)
+{
+	struct papr_rtas_sequence seq = {};
+	struct rtas_get_indices_params params = {};
+	int fd;
+
+	if (get_user(params.is_sensor, &ubuf->indices.is_sensor))
+		return -EFAULT;
+
+	if (get_user(params.indice_type, &ubuf->indices.indice_type))
+		return -EFAULT;
+
+	seq = (struct papr_rtas_sequence) {
+		.begin = indices_sequence_begin,
+		.end = indices_sequence_end,
+		.work = indices_sequence_fill_work_area,
+	};
+
+	seq.params = &params;
+	fd = papr_rtas_setup_file_interface(&seq,
+			&papr_indices_handle_ops, "[papr-indices]");
+
+	return fd;
+}
+
+/*
+ * Create work area with the input parameters. This function is used
+ * for both ibm,set-dynamic-indicator and ibm,get-dynamic-sensor-state
+ * RTAS Calls.
+ */
+static struct rtas_work_area *
+papr_dynamic_indice_buf_from_user(struct papr_indices_io_block __user *ubuf,
+				struct papr_indices_io_block *kbuf)
+{
+	struct rtas_work_area *work_area;
+	u32 length;
+	__be32 len_be;
+
+	if (copy_from_user(kbuf, ubuf, sizeof(*kbuf)))
+		return ERR_PTR(-EFAULT);
+
+
+	if (!string_is_terminated(kbuf->dynamic_param.location_code_str,
+			ARRAY_SIZE(kbuf->dynamic_param.location_code_str)))
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * The input data in the work area should be as follows:
+	 * - 32-bit integer length of the location code string,
+	 *   including NULL.
+	 * - Location code string, NULL terminated, identifying the
+	 *   token (sensor or indicator).
+	 * PAPR 2.13 - R1–7.3.18–5 ibm,set-dynamic-indicator
+	 *           - R1–7.3.19–5 ibm,get-dynamic-sensor-state
+	 */
+	/*
+	 * Length that user space passed should also include NULL
+	 * terminator.
+	 */
+	length = strlen(kbuf->dynamic_param.location_code_str) + 1;
+	if (length > LOC_CODE_SIZE)
+		return ERR_PTR(-EINVAL);
+
+	len_be = cpu_to_be32(length);
+
+	work_area = rtas_work_area_alloc(LOC_CODE_SIZE + sizeof(u32));
+	memcpy(rtas_work_area_raw_buf(work_area), &len_be, sizeof(u32));
+	memcpy((rtas_work_area_raw_buf(work_area) + sizeof(u32)),
+			&kbuf->dynamic_param.location_code_str, length);
+
+	return work_area;
+}
+
+/**
+ * papr_dynamic_indicator_ioc_set - ibm,set-dynamic-indicator RTAS Call
+ * PAPR 2.13 7.3.18
+ *
+ * @ubuf: Input parameters to RTAS call such as indicator token and
+ *        new state.
+ *
+ * Returns success or -errno.
+ */
+static long papr_dynamic_indicator_ioc_set(struct papr_indices_io_block __user *ubuf)
+{
+	struct papr_indices_io_block kbuf;
+	struct rtas_work_area *work_area;
+	s32 fwrc, token, ret;
+
+	token = rtas_function_token(RTAS_FN_IBM_SET_DYNAMIC_INDICATOR);
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	mutex_lock(&rtas_ibm_set_dynamic_indicator_lock);
+	work_area = papr_dynamic_indice_buf_from_user(ubuf, &kbuf);
+	if (IS_ERR(work_area)) {
+		ret = PTR_ERR(work_area);
+		goto out;
+	}
+
+	do {
+		fwrc = rtas_call(token, 3, 1, NULL,
+				kbuf.dynamic_param.token,
+				kbuf.dynamic_param.state,
+				rtas_work_area_phys(work_area));
+	} while (rtas_busy_delay(fwrc));
+
+	rtas_work_area_free(work_area);
+
+	switch (fwrc) {
+	case RTAS_SUCCESS:
+		ret = 0;
+		break;
+	case RTAS_IBM_DYNAMIC_INDICE_NO_INDICATOR:	/* No such indicator */
+		ret = -EOPNOTSUPP;
+		break;
+	default:
+		pr_err("unexpected ibm,set-dynamic-indicator result %d\n",
+			fwrc);
+		fallthrough;
+	case RTAS_HARDWARE_ERROR:	/* Hardware/platform error */
+		ret = -EIO;
+		break;
+	}
+
+out:
+	mutex_unlock(&rtas_ibm_set_dynamic_indicator_lock);
+	return ret;
+}
+
+/**
+ * papr_dynamic_sensor_ioc_get - ibm,get-dynamic-sensor-state RTAS Call
+ * PAPR 2.13 7.3.19
+ *
+ * @ubuf: Input parameters to RTAS call such as sensor token
+ *        Copies the state in user space buffer.
+ *
+ *
+ * Returns success or -errno.
+ */
+
+static long papr_dynamic_sensor_ioc_get(struct papr_indices_io_block __user *ubuf)
+{
+	struct papr_indices_io_block kbuf;
+	struct rtas_work_area *work_area;
+	s32 fwrc, token, ret;
+	u32 rets;
+
+	token = rtas_function_token(RTAS_FN_IBM_GET_DYNAMIC_SENSOR_STATE);
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	mutex_lock(&rtas_ibm_get_dynamic_sensor_state_lock);
+	work_area = papr_dynamic_indice_buf_from_user(ubuf, &kbuf);
+	if (IS_ERR(work_area)) {
+		ret = PTR_ERR(work_area);
+		goto out;
+	}
+
+	do {
+		fwrc = rtas_call(token, 2, 2, &rets,
+				kbuf.dynamic_param.token,
+				rtas_work_area_phys(work_area));
+	} while (rtas_busy_delay(fwrc));
+
+	rtas_work_area_free(work_area);
+
+	switch (fwrc) {
+	case RTAS_SUCCESS:
+		if (put_user(rets, &ubuf->dynamic_param.state))
+			ret = -EFAULT;
+		else
+			ret = 0;
+		break;
+	case RTAS_IBM_DYNAMIC_INDICE_NO_INDICATOR:	/* No such indicator */
+		ret = -EOPNOTSUPP;
+		break;
+	default:
+		pr_err("unexpected ibm,get-dynamic-sensor result %d\n",
+				fwrc);
+		fallthrough;
+	case RTAS_HARDWARE_ERROR:	/* Hardware/platform error */
+		ret = -EIO;
+		break;
+	}
+
+out:
+	mutex_unlock(&rtas_ibm_get_dynamic_sensor_state_lock);
+	return ret;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr-indices.
+ */
+static long papr_indices_dev_ioctl(struct file *filp, unsigned int ioctl,
+				unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_INDICES_IOC_GET:
+		ret = papr_indices_create_handle(argp);
+		break;
+	case PAPR_DYNAMIC_SENSOR_IOC_GET:
+		ret = papr_dynamic_sensor_ioc_get(argp);
+		break;
+	case PAPR_DYNAMIC_INDICATOR_IOC_SET:
+		if (filp->f_mode & FMODE_WRITE)
+			ret = papr_dynamic_indicator_ioc_set(argp);
+		else
+			ret = -EBADF;
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct file_operations papr_indices_ops = {
+	.unlocked_ioctl = papr_indices_dev_ioctl,
+};
+
+static struct miscdevice papr_indices_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-indices",
+	.fops = &papr_indices_ops,
+};
+
+static __init int papr_indices_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_INDICES))
+		return -ENODEV;
+
+	if (!rtas_function_implemented(RTAS_FN_IBM_SET_DYNAMIC_INDICATOR))
+		return -ENODEV;
+
+	if (!rtas_function_implemented(RTAS_FN_IBM_GET_DYNAMIC_SENSOR_STATE))
+		return -ENODEV;
+
+	return misc_register(&papr_indices_dev);
+}
+machine_device_initcall(pseries, papr_indices_init);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-phy-attest.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-phy-attest.c
new file mode 100644
index 000000000000..1907f2411567
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-phy-attest.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-phy-attest: " fmt
+
+#include <linux/build_bug.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/lockdep.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/string_helpers.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
+#include <uapi/asm/papr-physical-attestation.h>
+#include "papr-rtas-common.h"
+
+/**
+ * struct rtas_phy_attest_params - Parameters (in and out) for
+ * ibm,physical-attestation.
+ *
+ * @cmd:  In: Caller-provided attestation command buffer. Must be
+ *        RTAS-addressable.
+ * @work_area: In: Caller-provided work area buffer for attestation
+ *             command structure
+ *             Out: Caller-provided work area buffer for the response
+ * @cmd_len:   In: Caller-provided attestation command structure
+ *             length
+ * @sequence:  In: Sequence number. Out: Next sequence number.
+ * @written:   Out: Bytes written by ibm,physical-attestation to
+ *             @work_area.
+ * @status:    Out: RTAS call status.
+ */
+struct rtas_phy_attest_params {
+	struct papr_phy_attest_io_block cmd;
+	struct rtas_work_area *work_area;
+	u32 cmd_len;
+	u32 sequence;
+	u32 written;
+	s32 status;
+};
+
+/**
+ * rtas_physical_attestation() - Call ibm,physical-attestation to
+ * fill a work area buffer.
+ * @params: See &struct rtas_phy_attest_params.
+ *
+ * Calls ibm,physical-attestation until it errors or successfully
+ * deposits data into the supplied work area. Handles RTAS retry
+ * statuses. Maps RTAS error statuses to reasonable errno values.
+ *
+ * The caller is expected to invoke rtas_physical_attestation()
+ * multiple times to retrieve all the data for the provided
+ * attestation command. Only one sequence should be in progress at
+ * any time; starting a new sequence will disrupt any sequence
+ * already in progress. Serialization of attestation retrieval
+ * sequences is the responsibility of the caller.
+ *
+ * The caller should inspect @params.status to determine whether more
+ * calls are needed to complete the sequence.
+ *
+ * Context: May sleep.
+ * Return: -ve on error, 0 otherwise.
+ */
+static int rtas_physical_attestation(struct rtas_phy_attest_params *params)
+{
+	struct rtas_work_area *work_area;
+	s32 fwrc, token;
+	u32 rets[2];
+	int ret;
+
+	work_area = params->work_area;
+	token = rtas_function_token(RTAS_FN_IBM_PHYSICAL_ATTESTATION);
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	lockdep_assert_held(&rtas_ibm_physical_attestation_lock);
+
+	do {
+		fwrc = rtas_call(token, 3, 3, rets,
+				 rtas_work_area_phys(work_area),
+				 params->cmd_len,
+				 params->sequence);
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER:
+		ret = -EINVAL;
+		break;
+	case RTAS_SEQ_MORE_DATA:
+		params->sequence = rets[0];
+		fallthrough;
+	case RTAS_SEQ_COMPLETE:
+		params->written = rets[1];
+		/*
+		 * Kernel or firmware bug, do not continue.
+		 */
+		if (WARN(params->written > rtas_work_area_size(work_area),
+			 "possible write beyond end of work area"))
+			ret = -EFAULT;
+		else
+			ret = 0;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,get-phy_attest status %d\n", fwrc);
+		break;
+	}
+
+	params->status = fwrc;
+	return ret;
+}
+
+/*
+ * Internal physical-attestation sequence APIs. A physical-attestation
+ * sequence is a series of calls to get ibm,physical-attestation
+ * for a given attestation command. The sequence ends when an error
+ * is encountered or all data for the attestation command has been
+ * returned.
+ */
+
+/**
+ * phy_attest_sequence_begin() - Begin a response data for attestation
+ * command retrieval sequence.
+ * @seq: user specified parameters for RTAS call from seq struct.
+ *
+ * Context: May sleep.
+ */
+static void phy_attest_sequence_begin(struct papr_rtas_sequence *seq)
+{
+	struct rtas_phy_attest_params *param;
+
+	/*
+	 * We could allocate the work area before acquiring the
+	 * function lock, but that would allow concurrent requests to
+	 * exhaust the limited work area pool for no benefit. So
+	 * allocate the work area under the lock.
+	 */
+	mutex_lock(&rtas_ibm_physical_attestation_lock);
+	param =  (struct rtas_phy_attest_params *)seq->params;
+	param->work_area = rtas_work_area_alloc(SZ_4K);
+	memcpy(rtas_work_area_raw_buf(param->work_area), &param->cmd,
+			param->cmd_len);
+	param->sequence = 1;
+	param->status = 0;
+}
+
+/**
+ * phy_attest_sequence_end() - Finalize a attestation command
+ * response retrieval sequence.
+ * @seq: Sequence state.
+ *
+ * Releases resources obtained by phy_attest_sequence_begin().
+ */
+static void phy_attest_sequence_end(struct papr_rtas_sequence *seq)
+{
+	struct rtas_phy_attest_params *param;
+
+	param =  (struct rtas_phy_attest_params *)seq->params;
+	rtas_work_area_free(param->work_area);
+	mutex_unlock(&rtas_ibm_physical_attestation_lock);
+	kfree(param);
+}
+
+/*
+ * Generator function to be passed to papr_rtas_blob_generate().
+ */
+static const char *phy_attest_sequence_fill_work_area(struct papr_rtas_sequence *seq,
+						size_t *len)
+{
+	struct rtas_phy_attest_params *p;
+	bool init_state;
+
+	p = (struct rtas_phy_attest_params *)seq->params;
+	init_state = (p->written == 0) ? true : false;
+
+	if (papr_rtas_sequence_should_stop(seq, p->status, init_state))
+		return NULL;
+	if (papr_rtas_sequence_set_err(seq, rtas_physical_attestation(p)))
+		return NULL;
+	*len = p->written;
+	return rtas_work_area_raw_buf(p->work_area);
+}
+
+static const struct file_operations papr_phy_attest_handle_ops = {
+	.read = papr_rtas_common_handle_read,
+	.llseek = papr_rtas_common_handle_seek,
+	.release = papr_rtas_common_handle_release,
+};
+
+/**
+ * papr_phy_attest_create_handle() - Create a fd-based handle for
+ * reading the response for the given attestation command.
+ * @ulc: Attestation command in user memory; defines the scope of
+ *       data for the attestation command to retrieve.
+ *
+ * Handler for PAPR_PHYSICAL_ATTESTATION_IOC_CREATE_HANDLE ioctl
+ * command. Validates @ulc and instantiates an immutable response
+ * "blob" for attestation command. The blob is attached to a file
+ * descriptor for reading by user space. The memory backing the blob
+ * is freed when the file is released.
+ *
+ * The entire requested response buffer for the attestation command
+ * retrieved by this call and all necessary RTAS interactions are
+ * performed before returning the fd to user space. This keeps the
+ * read handler simple and ensures that kernel can prevent
+ * interleaving ibm,physical-attestation call sequences.
+ *
+ * Return: The installed fd number if successful, -ve errno otherwise.
+ */
+static long papr_phy_attest_create_handle(struct papr_phy_attest_io_block __user *ulc)
+{
+	struct rtas_phy_attest_params *params;
+	struct papr_rtas_sequence seq = {};
+	int fd;
+
+	/*
+	 * Freed in phy_attest_sequence_end().
+	 */
+	params =  kzalloc(sizeof(*params), GFP_KERNEL_ACCOUNT);
+	if (!params)
+		return -ENOMEM;
+
+	if (copy_from_user(&params->cmd, ulc,
+			sizeof(struct papr_phy_attest_io_block)))
+		return -EFAULT;
+
+	params->cmd_len = be32_to_cpu(params->cmd.length);
+	seq = (struct papr_rtas_sequence) {
+		.begin = phy_attest_sequence_begin,
+		.end = phy_attest_sequence_end,
+		.work = phy_attest_sequence_fill_work_area,
+	};
+
+	seq.params = (void *)params;
+
+	fd = papr_rtas_setup_file_interface(&seq,
+			&papr_phy_attest_handle_ops,
+			"[papr-physical-attestation]");
+
+	return fd;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr-physical-attestation.
+ */
+static long papr_phy_attest_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	void __user *argp = (__force void __user *)arg;
+	long ret;
+
+	switch (ioctl) {
+	case PAPR_PHY_ATTEST_IOC_HANDLE:
+		ret = papr_phy_attest_create_handle(argp);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_phy_attest_ops = {
+	.unlocked_ioctl = papr_phy_attest_dev_ioctl,
+};
+
+static struct miscdevice papr_phy_attest_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-physical-attestation",
+	.fops = &papr_phy_attest_ops,
+};
+
+static __init int papr_phy_attest_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_PHYSICAL_ATTESTATION))
+		return -ENODEV;
+
+	return misc_register(&papr_phy_attest_dev);
+}
+machine_device_initcall(pseries, papr_phy_attest_init);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-platform-dump.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-platform-dump.c
new file mode 100644
index 000000000000..f8d55eccdb6b
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-platform-dump.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-platform-dump: " fmt
+
+#include <linux/anon_inodes.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <asm/machdep.h>
+#include <asm/rtas-work-area.h>
+#include <asm/rtas.h>
+#include <uapi/asm/papr-platform-dump.h>
+
+/*
+ * Function-specific return values for ibm,platform-dump, derived from
+ * PAPR+ v2.13 7.3.3.4.1 "ibm,platform-dump RTAS Call".
+ */
+#define	RTAS_IBM_PLATFORM_DUMP_COMPLETE	0	/* Complete dump retrieved. */
+#define	RTAS_IBM_PLATFORM_DUMP_CONTINUE	1	/* Continue dump */
+#define	RTAS_NOT_AUTHORIZED		-9002	/* Not Authorized */
+
+#define	RTAS_IBM_PLATFORM_DUMP_START	2 /* Linux status to start dump */
+
+/**
+ * struct ibm_platform_dump_params - Parameters (in and out) for
+ *                                              ibm,platform-dump
+ * @work_area:		In: work area buffer for results.
+ * @buf_length:		In: work area buffer length in bytes
+ * @dump_tag_hi:	In: Most-significant 32 bits of a Dump_Tag representing
+ *                      an id of the dump being processed.
+ * @dump_tag_lo:	In: Least-significant 32 bits of a Dump_Tag representing
+ *                      an id of the dump being processed.
+ * @sequence_hi:	In: Sequence number in most-significant 32 bits.
+ *                      Out: Next sequence number in most-significant 32 bits.
+ * @sequence_lo:	In: Sequence number in Least-significant 32 bits
+ *                      Out: Next sequence number in Least-significant 32 bits.
+ * @bytes_ret_hi:	Out: Bytes written in most-significant 32 bits.
+ * @bytes_ret_lo:	Out: Bytes written in Least-significant 32 bits.
+ * @status:		Out: RTAS call status.
+ * @list:		Maintain the list of dumps are in progress. Can
+ *                      retrieve multiple dumps with different dump IDs at
+ *                      the same time but not with the same dump ID. This list
+ *                      is used to determine whether the dump for the same ID
+ *                      is in progress.
+ */
+struct ibm_platform_dump_params {
+	struct rtas_work_area	*work_area;
+	u32			buf_length;
+	u32			dump_tag_hi;
+	u32			dump_tag_lo;
+	u32			sequence_hi;
+	u32			sequence_lo;
+	u32			bytes_ret_hi;
+	u32			bytes_ret_lo;
+	s32			status;
+	struct list_head	list;
+};
+
+/*
+ * Multiple dumps with different dump IDs can be retrieved at the same
+ * time, but not with dame dump ID. platform_dump_list_mutex and
+ * platform_dump_list are used to prevent this behavior.
+ */
+static DEFINE_MUTEX(platform_dump_list_mutex);
+static LIST_HEAD(platform_dump_list);
+
+/**
+ * rtas_ibm_platform_dump() - Call ibm,platform-dump to fill a work area
+ * buffer.
+ * @params: See &struct ibm_platform_dump_params.
+ * @buf_addr: Address of dump buffer (work_area)
+ * @buf_length: Length of the buffer in bytes (min. 1024)
+ *
+ * Calls ibm,platform-dump until it errors or successfully deposits data
+ * into the supplied work area. Handles RTAS retry statuses. Maps RTAS
+ * error statuses to reasonable errno values.
+ *
+ * Can request multiple dumps with different dump IDs at the same time,
+ * but not with the same dump ID which is prevented with the check in
+ * the ioctl code (papr_platform_dump_create_handle()).
+ *
+ * The caller should inspect @params.status to determine whether more
+ * calls are needed to complete the sequence.
+ *
+ * Context: May sleep.
+ * Return: -ve on error, 0 for dump complete and 1 for continue dump
+ */
+static int rtas_ibm_platform_dump(struct ibm_platform_dump_params *params,
+				phys_addr_t buf_addr, u32 buf_length)
+{
+	u32 rets[4];
+	s32 fwrc;
+	int ret = 0;
+
+	do {
+		fwrc = rtas_call(rtas_function_token(RTAS_FN_IBM_PLATFORM_DUMP),
+				6, 5,
+				rets,
+				params->dump_tag_hi,
+				params->dump_tag_lo,
+				params->sequence_hi,
+				params->sequence_lo,
+				buf_addr,
+				buf_length);
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_NOT_AUTHORIZED:
+		ret = -EPERM;
+		break;
+	case RTAS_IBM_PLATFORM_DUMP_CONTINUE:
+	case RTAS_IBM_PLATFORM_DUMP_COMPLETE:
+		params->sequence_hi = rets[0];
+		params->sequence_lo = rets[1];
+		params->bytes_ret_hi = rets[2];
+		params->bytes_ret_lo = rets[3];
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,platform-dump status %d\n",
+				fwrc);
+		break;
+	}
+
+	params->status = fwrc;
+	return ret;
+}
+
+/*
+ * Platform dump is used with multiple RTAS calls to retrieve the
+ * complete dump for the provided dump ID. Once the complete dump is
+ * retrieved, the hypervisor returns dump complete status (0) for the
+ * last RTAS call and expects the caller issues one more call with
+ * NULL buffer to invalidate the dump so that the hypervisor can remove
+ * the dump.
+ *
+ * After the specific dump is invalidated in the hypervisor, expect the
+ * dump complete status for the new sequence - the user space initiates
+ * new request for the same dump ID.
+ */
+static ssize_t papr_platform_dump_handle_read(struct file *file,
+		char __user *buf, size_t size, loff_t *off)
+{
+	struct ibm_platform_dump_params *params = file->private_data;
+	u64 total_bytes;
+	s32 fwrc;
+
+	/*
+	 * Dump already completed with the previous read calls.
+	 * In case if the user space issues further reads, returns
+	 * -EINVAL.
+	 */
+	if (!params->buf_length) {
+		pr_warn_once("Platform dump completed for dump ID %llu\n",
+			(u64) (((u64)params->dump_tag_hi << 32) |
+				params->dump_tag_lo));
+		return -EINVAL;
+	}
+
+	/*
+	 * The hypervisor returns status 0 if no more data available to
+	 * download. The dump will be invalidated with ioctl (see below).
+	 */
+	if (params->status == RTAS_IBM_PLATFORM_DUMP_COMPLETE) {
+		params->buf_length = 0;
+		/*
+		 * Returns 0 to the user space so that user
+		 * space read stops.
+		 */
+		return 0;
+	}
+
+	if (size < SZ_1K) {
+		pr_err_once("Buffer length should be minimum 1024 bytes\n");
+		return -EINVAL;
+	} else if (size > params->buf_length) {
+		/*
+		 * Allocate 4K work area. So if the user requests > 4K,
+		 * resize the buffer length.
+		 */
+		size = params->buf_length;
+	}
+
+	fwrc = rtas_ibm_platform_dump(params,
+			rtas_work_area_phys(params->work_area),
+			size);
+	if (fwrc < 0)
+		return fwrc;
+
+	total_bytes = (u64) (((u64)params->bytes_ret_hi << 32) |
+			params->bytes_ret_lo);
+
+	/*
+	 * Kernel or firmware bug, do not continue.
+	 */
+	if (WARN(total_bytes > size, "possible write beyond end of work area"))
+		return -EFAULT;
+
+	if (copy_to_user(buf, rtas_work_area_raw_buf(params->work_area),
+			total_bytes))
+		return -EFAULT;
+
+	return total_bytes;
+}
+
+static int papr_platform_dump_handle_release(struct inode *inode,
+					struct file *file)
+{
+	struct ibm_platform_dump_params *params = file->private_data;
+
+	if (params->work_area)
+		rtas_work_area_free(params->work_area);
+
+	mutex_lock(&platform_dump_list_mutex);
+	list_del(&params->list);
+	mutex_unlock(&platform_dump_list_mutex);
+
+	kfree(params);
+	file->private_data = NULL;
+	return 0;
+}
+
+/*
+ * This ioctl is used to invalidate the dump assuming the user space
+ * issue this ioctl after obtain the complete dump.
+ * Issue the last RTAS call with NULL buffer to invalidate the dump
+ * which means dump will be freed in the hypervisor.
+ */
+static long papr_platform_dump_invalidate_ioctl(struct file *file,
+				unsigned int ioctl, unsigned long arg)
+{
+	struct ibm_platform_dump_params *params;
+	u64 __user *argp = (void __user *)arg;
+	u64 param_dump_tag, dump_tag;
+
+	if (ioctl != PAPR_PLATFORM_DUMP_IOC_INVALIDATE)
+		return -ENOIOCTLCMD;
+
+	if (get_user(dump_tag, argp))
+		return -EFAULT;
+
+	/*
+	 * private_data is freeded during release(), so should not
+	 * happen.
+	 */
+	if (!file->private_data) {
+		pr_err("No valid FD to invalidate dump for the ID(%llu)\n",
+				dump_tag);
+		return -EINVAL;
+	}
+
+	params = file->private_data;
+	param_dump_tag = (u64) (((u64)params->dump_tag_hi << 32) |
+				params->dump_tag_lo);
+	if (dump_tag != param_dump_tag) {
+		pr_err("Invalid dump ID(%llu) to invalidate dump\n",
+				dump_tag);
+		return -EINVAL;
+	}
+
+	if (params->status != RTAS_IBM_PLATFORM_DUMP_COMPLETE) {
+		pr_err("Platform dump is not complete, but requested "
+			"to invalidate dump for ID(%llu)\n",
+			dump_tag);
+		return -EINPROGRESS;
+	}
+
+	return rtas_ibm_platform_dump(params, 0, 0);
+}
+
+static const struct file_operations papr_platform_dump_handle_ops = {
+	.read = papr_platform_dump_handle_read,
+	.release = papr_platform_dump_handle_release,
+	.unlocked_ioctl	= papr_platform_dump_invalidate_ioctl,
+};
+
+/**
+ * papr_platform_dump_create_handle() - Create a fd-based handle for
+ * reading platform dump
+ *
+ * Handler for PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE ioctl command
+ * Allocates RTAS parameter struct and work area and attached to the
+ * file descriptor for reading by user space with the multiple RTAS
+ * calls until the dump is completed. This memory allocation is freed
+ * when the file is released.
+ *
+ * Multiple dump requests with different IDs are allowed at the same
+ * time, but not with the same dump ID. So if the user space is
+ * already opened file descriptor for the specific dump ID, return
+ * -EALREADY for the next request.
+ *
+ * @dump_tag: Dump ID for the dump requested to retrieve from the
+ *		hypervisor
+ *
+ * Return: The installed fd number if successful, -ve errno otherwise.
+ */
+static long papr_platform_dump_create_handle(u64 dump_tag)
+{
+	struct ibm_platform_dump_params *params;
+	u64 param_dump_tag;
+	struct file *file;
+	long err;
+	int fd;
+
+	/*
+	 * Return failure if the user space is already opened FD for
+	 * the specific dump ID. This check will prevent multiple dump
+	 * requests for the same dump ID at the same time. Generally
+	 * should not expect this, but in case.
+	 */
+	list_for_each_entry(params, &platform_dump_list, list) {
+		param_dump_tag = (u64) (((u64)params->dump_tag_hi << 32) |
+					params->dump_tag_lo);
+		if (dump_tag == param_dump_tag) {
+			pr_err("Platform dump for ID(%llu) is already in progress\n",
+					dump_tag);
+			return -EALREADY;
+		}
+	}
+
+	params =  kzalloc(sizeof(struct ibm_platform_dump_params),
+			GFP_KERNEL_ACCOUNT);
+	if (!params)
+		return -ENOMEM;
+
+	params->work_area = rtas_work_area_alloc(SZ_4K);
+	params->buf_length = SZ_4K;
+	params->dump_tag_hi = (u32)(dump_tag >> 32);
+	params->dump_tag_lo = (u32)(dump_tag & 0x00000000ffffffffULL);
+	params->status = RTAS_IBM_PLATFORM_DUMP_START;
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		err = fd;
+		goto free_area;
+	}
+
+	file = anon_inode_getfile_fmode("[papr-platform-dump]",
+				&papr_platform_dump_handle_ops,
+				(void *)params, O_RDONLY,
+				FMODE_LSEEK | FMODE_PREAD);
+	if (IS_ERR(file)) {
+		err = PTR_ERR(file);
+		goto put_fd;
+	}
+
+	fd_install(fd, file);
+
+	list_add(&params->list, &platform_dump_list);
+
+	pr_info("%s (%d) initiated platform dump for dump tag %llu\n",
+		current->comm, current->pid, dump_tag);
+	return fd;
+put_fd:
+	put_unused_fd(fd);
+free_area:
+	rtas_work_area_free(params->work_area);
+	kfree(params);
+	return err;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr-platform-dump.
+ */
+static long papr_platform_dump_dev_ioctl(struct file *filp,
+					unsigned int ioctl,
+					unsigned long arg)
+{
+	u64 __user *argp = (void __user *)arg;
+	u64 dump_tag;
+	long ret;
+
+	if (get_user(dump_tag, argp))
+		return -EFAULT;
+
+	switch (ioctl) {
+	case PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE:
+		mutex_lock(&platform_dump_list_mutex);
+		ret = papr_platform_dump_create_handle(dump_tag);
+		mutex_unlock(&platform_dump_list_mutex);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations papr_platform_dump_ops = {
+	.unlocked_ioctl = papr_platform_dump_dev_ioctl,
+};
+
+static struct miscdevice papr_platform_dump_dev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "papr-platform-dump",
+	.fops = &papr_platform_dump_ops,
+};
+
+static __init int papr_platform_dump_init(void)
+{
+	if (!rtas_function_implemented(RTAS_FN_IBM_PLATFORM_DUMP))
+		return -ENODEV;
+
+	return misc_register(&papr_platform_dump_dev);
+}
+machine_device_initcall(pseries, papr_platform_dump_init);
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.c
new file mode 100644
index 000000000000..33c606e3378a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-common: " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/anon_inodes.h>
+#include <linux/sched/signal.h>
+#include "papr-rtas-common.h"
+
+/*
+ * Sequence based RTAS HCALL has to issue multiple times to retrieve
+ * complete data from the hypervisor. For some of these RTAS calls,
+ * the OS should not interleave calls with different input until the
+ * sequence is completed. So data is collected for these calls during
+ * ioctl handle and export to user space with read() handle.
+ * This file provides common functions needed for such sequence based
+ * RTAS calls Ex: ibm,get-vpd and ibm,get-indices.
+ */
+
+bool papr_rtas_blob_has_data(const struct papr_rtas_blob *blob)
+{
+	return blob->data && blob->len;
+}
+
+void papr_rtas_blob_free(const struct papr_rtas_blob *blob)
+{
+	if (blob) {
+		kvfree(blob->data);
+		kfree(blob);
+	}
+}
+
+/**
+ * papr_rtas_blob_extend() - Append data to a &struct papr_rtas_blob.
+ * @blob: The blob to extend.
+ * @data: The new data to append to @blob.
+ * @len:  The length of @data.
+ *
+ * Context: May sleep.
+ * Return: -ENOMEM on allocation failure, 0 otherwise.
+ */
+static int papr_rtas_blob_extend(struct papr_rtas_blob *blob,
+				const char *data, size_t len)
+{
+	const size_t new_len = blob->len + len;
+	const size_t old_len = blob->len;
+	const char *old_ptr = blob->data;
+	char *new_ptr;
+
+	new_ptr = kvrealloc(old_ptr, new_len, GFP_KERNEL_ACCOUNT);
+	if (!new_ptr)
+		return -ENOMEM;
+
+	memcpy(&new_ptr[old_len], data, len);
+	blob->data = new_ptr;
+	blob->len = new_len;
+	return 0;
+}
+
+/**
+ * papr_rtas_blob_generate() - Construct a new &struct papr_rtas_blob.
+ * @seq: work function of the caller that is called to obtain
+ *       data with the caller RTAS call.
+ *
+ * The @work callback is invoked until it returns NULL. @seq is
+ * passed to @work in its first argument on each call. When
+ * @work returns data, it should store the data length in its
+ * second argument.
+ *
+ * Context: May sleep.
+ * Return: A completely populated &struct papr_rtas_blob, or NULL on error.
+ */
+static const struct papr_rtas_blob *
+papr_rtas_blob_generate(struct papr_rtas_sequence *seq)
+{
+	struct papr_rtas_blob *blob;
+	const char *buf;
+	size_t len;
+	int err = 0;
+
+	blob  = kzalloc(sizeof(*blob), GFP_KERNEL_ACCOUNT);
+	if (!blob)
+		return NULL;
+
+	if (!seq->work)
+		return ERR_PTR(-EINVAL);
+
+
+	while (err == 0 && (buf = seq->work(seq, &len)))
+		err = papr_rtas_blob_extend(blob, buf, len);
+
+	if (err != 0 || !papr_rtas_blob_has_data(blob))
+		goto free_blob;
+
+	return blob;
+free_blob:
+	papr_rtas_blob_free(blob);
+	return NULL;
+}
+
+int papr_rtas_sequence_set_err(struct papr_rtas_sequence *seq, int err)
+{
+	/* Preserve the first error recorded. */
+	if (seq->error == 0)
+		seq->error = err;
+
+	return seq->error;
+}
+
+/*
+ * Higher-level retrieval code below. These functions use the
+ * papr_rtas_blob_* and sequence_* APIs defined above to create fd-based
+ * handles for consumption by user space.
+ */
+
+/**
+ * papr_rtas_run_sequence() - Run a single retrieval sequence.
+ * @seq:	Functions of the caller to complete the sequence
+ *
+ * Context: May sleep. Holds a mutex and an RTAS work area for its
+ *          duration. Typically performs multiple sleepable slab
+ *          allocations.
+ *
+ * Return: A populated &struct papr_rtas_blob on success. Encoded error
+ * pointer otherwise.
+ */
+static const struct papr_rtas_blob *papr_rtas_run_sequence(struct papr_rtas_sequence *seq)
+{
+	const struct papr_rtas_blob *blob;
+
+	if (seq->begin)
+		seq->begin(seq);
+
+	blob = papr_rtas_blob_generate(seq);
+	if (!blob)
+		papr_rtas_sequence_set_err(seq, -ENOMEM);
+
+	if (seq->end)
+		seq->end(seq);
+
+
+	if (seq->error) {
+		papr_rtas_blob_free(blob);
+		return ERR_PTR(seq->error);
+	}
+
+	return blob;
+}
+
+/**
+ * papr_rtas_retrieve() - Return the data blob that is exposed to
+ * user space.
+ * @seq: RTAS call specific functions to be invoked until the
+ *       sequence is completed.
+ *
+ * Run sequences against @param until a blob is successfully
+ * instantiated, or a hard error is encountered, or a fatal signal is
+ * pending.
+ *
+ * Context: May sleep.
+ * Return: A fully populated data blob when successful. Encoded error
+ * pointer otherwise.
+ */
+const struct papr_rtas_blob *papr_rtas_retrieve(struct papr_rtas_sequence *seq)
+{
+	const struct papr_rtas_blob *blob;
+
+	/*
+	 * EAGAIN means the sequence returns error with a -4 (data
+	 * changed and need to start the sequence) status from RTAS calls
+	 * and we should attempt a new sequence. PAPR+ (v2.13 R1–7.3.20–5
+	 * - ibm,get-vpd, R1–7.3.17–6 - ibm,get-indices) indicates that
+	 * this should be a transient condition, not something that
+	 * happens continuously. But we'll stop trying on a fatal signal.
+	 */
+	do {
+		blob = papr_rtas_run_sequence(seq);
+		if (!IS_ERR(blob)) /* Success. */
+			break;
+		if (PTR_ERR(blob) != -EAGAIN) /* Hard error. */
+			break;
+		cond_resched();
+	} while (!fatal_signal_pending(current));
+
+	return blob;
+}
+
+/**
+ * papr_rtas_setup_file_interface - Complete the sequence and obtain
+ * the data and export to user space with fd-based handles. Then the
+ * user spave gets the data with read() handle.
+ * @seq: RTAS call specific functions to get the data.
+ * @fops: RTAS call specific file operations such as read().
+ * @name: RTAS call specific char device node.
+ *
+ * Return: FD handle for consumption by user space
+ */
+long papr_rtas_setup_file_interface(struct papr_rtas_sequence *seq,
+				const struct file_operations *fops,
+				char *name)
+{
+	const struct papr_rtas_blob *blob;
+	struct file *file;
+	long ret;
+	int fd;
+
+	blob = papr_rtas_retrieve(seq);
+	if (IS_ERR(blob))
+		return PTR_ERR(blob);
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		ret = fd;
+		goto free_blob;
+	}
+
+	file = anon_inode_getfile_fmode(name, fops, (void *)blob,
+			O_RDONLY, FMODE_LSEEK | FMODE_PREAD);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto put_fd;
+	}
+
+	fd_install(fd, file);
+	return fd;
+
+put_fd:
+	put_unused_fd(fd);
+free_blob:
+	papr_rtas_blob_free(blob);
+	return ret;
+}
+
+/*
+ * papr_rtas_sequence_should_stop() - Determine whether RTAS retrieval
+ *                                    sequence should continue.
+ *
+ * Examines the sequence error state and outputs of the last call to
+ * the specific RTAS to determine whether the sequence in progress
+ * should continue or stop.
+ *
+ * Return: True if the sequence has encountered an error or if all data
+ *         for this sequence has been retrieved. False otherwise.
+ */
+bool papr_rtas_sequence_should_stop(const struct papr_rtas_sequence *seq,
+				s32 status, bool init_state)
+{
+	bool done;
+
+	if (seq->error)
+		return true;
+
+	switch (status) {
+	case RTAS_SEQ_COMPLETE:
+		if (init_state)
+			done = false; /* Initial state. */
+		else
+			done = true; /* All data consumed. */
+		break;
+	case RTAS_SEQ_MORE_DATA:
+		done = false; /* More data available. */
+		break;
+	default:
+		done = true; /* Error encountered. */
+		break;
+	}
+
+	return done;
+}
+
+/*
+ * User space read to retrieve data for the corresponding RTAS call.
+ * papr_rtas_blob is filled with the data using the corresponding RTAS
+ * call sequence API.
+ */
+ssize_t papr_rtas_common_handle_read(struct file *file,
+	       char __user *buf, size_t size, loff_t *off)
+{
+	const struct papr_rtas_blob *blob = file->private_data;
+
+	/* We should not instantiate a handle without any data attached. */
+	if (!papr_rtas_blob_has_data(blob)) {
+		pr_err_once("handle without data\n");
+		return -EIO;
+	}
+
+	return simple_read_from_buffer(buf, size, off, blob->data, blob->len);
+}
+
+int papr_rtas_common_handle_release(struct inode *inode,
+		struct file *file)
+{
+	const struct papr_rtas_blob *blob = file->private_data;
+
+	papr_rtas_blob_free(blob);
+
+	return 0;
+}
+
+loff_t papr_rtas_common_handle_seek(struct file *file, loff_t off,
+					int whence)
+{
+	const struct papr_rtas_blob *blob = file->private_data;
+
+	return fixed_size_llseek(file, off, whence, blob->len);
+}
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.h linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.h
new file mode 100644
index 000000000000..4ceabcaf4905
--- /dev/null
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-rtas-common.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_POWERPC_PAPR_RTAS_COMMON_H
+#define _ASM_POWERPC_PAPR_RTAS_COMMON_H
+
+#include <linux/types.h>
+
+/*
+ * Return codes for sequence based RTAS calls.
+ * Not listed under PAPR+ v2.13 7.2.8: "Return Codes".
+ * But defined in the specific section of each RTAS call.
+ */
+#define RTAS_SEQ_COMPLETE	0 /* All data has been retrieved. */
+#define RTAS_SEQ_MORE_DATA	1 /* More data is available */
+#define RTAS_SEQ_START_OVER	-4 /* Data changed, restart call sequence. */
+
+/*
+ * Internal "blob" APIs for accumulating RTAS call results into
+ * an immutable buffer to be attached to a file descriptor.
+ */
+struct papr_rtas_blob {
+	const char *data;
+	size_t len;
+};
+
+/**
+ * struct papr_sequence - State for managing a sequence of RTAS calls.
+ * @error:  Shall be zero as long as the sequence has not encountered an error,
+ *          -ve errno otherwise. Use papr_rtas_sequence_set_err() to update.
+ * @params: Parameter block to pass to rtas_*() calls.
+ * @begin: Work area allocation and initialize the needed parameter
+ *         values passed to RTAS call
+ * @end: Free the allocated work area
+ * @work: Obtain data with RTAS call and invoke it until the sequence is
+ *        completed.
+ *
+ */
+struct papr_rtas_sequence {
+	int error;
+	void *params;
+	void (*begin)(struct papr_rtas_sequence *seq);
+	void (*end)(struct papr_rtas_sequence *seq);
+	const char *(*work)(struct papr_rtas_sequence *seq, size_t *len);
+};
+
+extern bool papr_rtas_blob_has_data(const struct papr_rtas_blob *blob);
+extern void papr_rtas_blob_free(const struct papr_rtas_blob *blob);
+extern int papr_rtas_sequence_set_err(struct papr_rtas_sequence *seq,
+		int err);
+extern const struct papr_rtas_blob *papr_rtas_retrieve(struct papr_rtas_sequence *seq);
+extern long papr_rtas_setup_file_interface(struct papr_rtas_sequence *seq,
+			const struct file_operations *fops, char *name);
+extern bool papr_rtas_sequence_should_stop(const struct papr_rtas_sequence *seq,
+				s32 status, bool init_state);
+extern ssize_t papr_rtas_common_handle_read(struct file *file,
+			char __user *buf, size_t size, loff_t *off);
+extern int papr_rtas_common_handle_release(struct inode *inode,
+					struct file *file);
+extern loff_t papr_rtas_common_handle_seek(struct file *file, loff_t off,
+					int whence);
+#endif /* _ASM_POWERPC_PAPR_RTAS_COMMON_H */
+
diff --git linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-vpd.c linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-vpd.c
index c86950d7105a..f38c188fc4a1 100644
--- linux-libre-6.15-gnu/arch/powerpc/platforms/pseries/papr-vpd.c
+++ linux-libre-6.16-gnu/arch/powerpc/platforms/pseries/papr-vpd.c
@@ -2,7 +2,6 @@
 
 #define pr_fmt(fmt) "papr-vpd: " fmt
 
-#include <linux/anon_inodes.h>
 #include <linux/build_bug.h>
 #include <linux/file.h>
 #include <linux/fs.h>
@@ -20,14 +19,7 @@
 #include <asm/rtas-work-area.h>
 #include <asm/rtas.h>
 #include <uapi/asm/papr-vpd.h>
-
-/*
- * Function-specific return values for ibm,get-vpd, derived from PAPR+
- * v2.13 7.3.20 "ibm,get-vpd RTAS Call".
- */
-#define RTAS_IBM_GET_VPD_COMPLETE    0 /* All VPD has been retrieved. */
-#define RTAS_IBM_GET_VPD_MORE_DATA   1 /* More VPD is available. */
-#define RTAS_IBM_GET_VPD_START_OVER -4 /* VPD changed, restart call sequence. */
+#include "papr-rtas-common.h"
 
 /**
  * struct rtas_ibm_get_vpd_params - Parameters (in and out) for ibm,get-vpd.
@@ -91,13 +83,14 @@ static int rtas_ibm_get_vpd(struct rtas_ibm_get_vpd_params *params)
 	case RTAS_INVALID_PARAMETER:
 		ret = -EINVAL;
 		break;
-	case RTAS_IBM_GET_VPD_START_OVER:
+	case RTAS_SEQ_START_OVER:
 		ret = -EAGAIN;
+		pr_info_ratelimited("VPD changed during retrieval, retrying\n");
 		break;
-	case RTAS_IBM_GET_VPD_MORE_DATA:
+	case RTAS_SEQ_MORE_DATA:
 		params->sequence = rets[0];
 		fallthrough;
-	case RTAS_IBM_GET_VPD_COMPLETE:
+	case RTAS_SEQ_COMPLETE:
 		params->written = rets[1];
 		/*
 		 * Kernel or firmware bug, do not continue.
@@ -118,91 +111,6 @@ static int rtas_ibm_get_vpd(struct rtas_ibm_get_vpd_params *params)
 	return ret;
 }
 
-/*
- * Internal VPD "blob" APIs for accumulating ibm,get-vpd results into
- * an immutable buffer to be attached to a file descriptor.
- */
-struct vpd_blob {
-	const char *data;
-	size_t len;
-};
-
-static bool vpd_blob_has_data(const struct vpd_blob *blob)
-{
-	return blob->data && blob->len;
-}
-
-static void vpd_blob_free(const struct vpd_blob *blob)
-{
-	if (blob) {
-		kvfree(blob->data);
-		kfree(blob);
-	}
-}
-
-/**
- * vpd_blob_extend() - Append data to a &struct vpd_blob.
- * @blob: The blob to extend.
- * @data: The new data to append to @blob.
- * @len:  The length of @data.
- *
- * Context: May sleep.
- * Return: -ENOMEM on allocation failure, 0 otherwise.
- */
-static int vpd_blob_extend(struct vpd_blob *blob, const char *data, size_t len)
-{
-	const size_t new_len = blob->len + len;
-	const size_t old_len = blob->len;
-	const char *old_ptr = blob->data;
-	char *new_ptr;
-
-	new_ptr = kvrealloc(old_ptr, new_len, GFP_KERNEL_ACCOUNT);
-	if (!new_ptr)
-		return -ENOMEM;
-
-	memcpy(&new_ptr[old_len], data, len);
-	blob->data = new_ptr;
-	blob->len = new_len;
-	return 0;
-}
-
-/**
- * vpd_blob_generate() - Construct a new &struct vpd_blob.
- * @generator: Function that supplies the blob data.
- * @arg:       Context pointer supplied by caller, passed to @generator.
- *
- * The @generator callback is invoked until it returns NULL. @arg is
- * passed to @generator in its first argument on each call. When
- * @generator returns data, it should store the data length in its
- * second argument.
- *
- * Context: May sleep.
- * Return: A completely populated &struct vpd_blob, or NULL on error.
- */
-static const struct vpd_blob *
-vpd_blob_generate(const char * (*generator)(void *, size_t *), void *arg)
-{
-	struct vpd_blob *blob;
-	const char *buf;
-	size_t len;
-	int err = 0;
-
-	blob  = kzalloc(sizeof(*blob), GFP_KERNEL_ACCOUNT);
-	if (!blob)
-		return NULL;
-
-	while (err == 0 && (buf = generator(arg, &len)))
-		err = vpd_blob_extend(blob, buf, len);
-
-	if (err != 0 || !vpd_blob_has_data(blob))
-		goto free_blob;
-
-	return blob;
-free_blob:
-	vpd_blob_free(blob);
-	return NULL;
-}
-
 /*
  * Internal VPD sequence APIs. A VPD sequence is a series of calls to
  * ibm,get-vpd for a given location code. The sequence ends when an
@@ -210,31 +118,15 @@ free_blob:
  * returned.
  */
 
-/**
- * struct vpd_sequence - State for managing a VPD sequence.
- * @error:  Shall be zero as long as the sequence has not encountered an error,
- *          -ve errno otherwise. Use vpd_sequence_set_err() to update this.
- * @params: Parameter block to pass to rtas_ibm_get_vpd().
- */
-struct vpd_sequence {
-	int error;
-	struct rtas_ibm_get_vpd_params params;
-};
-
 /**
  * vpd_sequence_begin() - Begin a VPD retrieval sequence.
- * @seq:      Uninitialized sequence state.
- * @loc_code: Location code that defines the scope of the VPD to return.
- *
- * Initializes @seq with the resources necessary to carry out a VPD
- * sequence. Callers must pass @seq to vpd_sequence_end() regardless
- * of whether the sequence succeeds.
+ * @seq: vpd call parameters from sequence struct
  *
  * Context: May sleep.
  */
-static void vpd_sequence_begin(struct vpd_sequence *seq,
-			       const struct papr_location_code *loc_code)
+static void vpd_sequence_begin(struct papr_rtas_sequence *seq)
 {
+	struct rtas_ibm_get_vpd_params *vpd_params;
 	/*
 	 * Use a static data structure for the location code passed to
 	 * RTAS to ensure it's in the RMA and avoid a separate work
@@ -242,6 +134,7 @@ static void vpd_sequence_begin(struct vpd_sequence *seq,
 	 */
 	static struct papr_location_code static_loc_code;
 
+	vpd_params =  (struct rtas_ibm_get_vpd_params *)seq->params;
 	/*
 	 * We could allocate the work area before acquiring the
 	 * function lock, but that would allow concurrent requests to
@@ -249,14 +142,12 @@ static void vpd_sequence_begin(struct vpd_sequence *seq,
 	 * allocate the work area under the lock.
 	 */
 	mutex_lock(&rtas_ibm_get_vpd_lock);
-	static_loc_code = *loc_code;
-	*seq = (struct vpd_sequence) {
-		.params = {
-			.work_area = rtas_work_area_alloc(SZ_4K),
-			.loc_code = &static_loc_code,
-			.sequence = 1,
-		},
-	};
+	static_loc_code = *(struct papr_location_code *)vpd_params->loc_code;
+	vpd_params =  (struct rtas_ibm_get_vpd_params *)seq->params;
+	vpd_params->work_area = rtas_work_area_alloc(SZ_4K);
+	vpd_params->loc_code = &static_loc_code;
+	vpd_params->sequence = 1;
+	vpd_params->status = 0;
 }
 
 /**
@@ -265,180 +156,39 @@ static void vpd_sequence_begin(struct vpd_sequence *seq,
  *
  * Releases resources obtained by vpd_sequence_begin().
  */
-static void vpd_sequence_end(struct vpd_sequence *seq)
+static void vpd_sequence_end(struct papr_rtas_sequence *seq)
 {
-	rtas_work_area_free(seq->params.work_area);
-	mutex_unlock(&rtas_ibm_get_vpd_lock);
-}
-
-/**
- * vpd_sequence_should_stop() - Determine whether a VPD retrieval sequence
- *                              should continue.
- * @seq: VPD sequence state.
- *
- * Examines the sequence error state and outputs of the last call to
- * ibm,get-vpd to determine whether the sequence in progress should
- * continue or stop.
- *
- * Return: True if the sequence has encountered an error or if all VPD for
- *         this sequence has been retrieved. False otherwise.
- */
-static bool vpd_sequence_should_stop(const struct vpd_sequence *seq)
-{
-	bool done;
-
-	if (seq->error)
-		return true;
+	struct rtas_ibm_get_vpd_params *vpd_params;
 
-	switch (seq->params.status) {
-	case 0:
-		if (seq->params.written == 0)
-			done = false; /* Initial state. */
-		else
-			done = true; /* All data consumed. */
-		break;
-	case 1:
-		done = false; /* More data available. */
-		break;
-	default:
-		done = true; /* Error encountered. */
-		break;
-	}
-
-	return done;
-}
-
-static int vpd_sequence_set_err(struct vpd_sequence *seq, int err)
-{
-	/* Preserve the first error recorded. */
-	if (seq->error == 0)
-		seq->error = err;
-
-	return seq->error;
+	vpd_params =  (struct rtas_ibm_get_vpd_params *)seq->params;
+	rtas_work_area_free(vpd_params->work_area);
+	mutex_unlock(&rtas_ibm_get_vpd_lock);
 }
 
 /*
- * Generator function to be passed to vpd_blob_generate().
+ * Generator function to be passed to papr_rtas_blob_generate().
  */
-static const char *vpd_sequence_fill_work_area(void *arg, size_t *len)
+static const char *vpd_sequence_fill_work_area(struct papr_rtas_sequence *seq,
+						size_t *len)
 {
-	struct vpd_sequence *seq = arg;
-	struct rtas_ibm_get_vpd_params *p = &seq->params;
+	struct rtas_ibm_get_vpd_params *p;
+	bool init_state;
 
-	if (vpd_sequence_should_stop(seq))
+	p = (struct rtas_ibm_get_vpd_params *)seq->params;
+	init_state = (p->written == 0) ? true : false;
+
+	if (papr_rtas_sequence_should_stop(seq, p->status, init_state))
 		return NULL;
-	if (vpd_sequence_set_err(seq, rtas_ibm_get_vpd(p)))
+	if (papr_rtas_sequence_set_err(seq, rtas_ibm_get_vpd(p)))
 		return NULL;
 	*len = p->written;
 	return rtas_work_area_raw_buf(p->work_area);
 }
 
-/*
- * Higher-level VPD retrieval code below. These functions use the
- * vpd_blob_* and vpd_sequence_* APIs defined above to create fd-based
- * VPD handles for consumption by user space.
- */
-
-/**
- * papr_vpd_run_sequence() - Run a single VPD retrieval sequence.
- * @loc_code: Location code that defines the scope of VPD to return.
- *
- * Context: May sleep. Holds a mutex and an RTAS work area for its
- *          duration. Typically performs multiple sleepable slab
- *          allocations.
- *
- * Return: A populated &struct vpd_blob on success. Encoded error
- * pointer otherwise.
- */
-static const struct vpd_blob *papr_vpd_run_sequence(const struct papr_location_code *loc_code)
-{
-	const struct vpd_blob *blob;
-	struct vpd_sequence seq;
-
-	vpd_sequence_begin(&seq, loc_code);
-	blob = vpd_blob_generate(vpd_sequence_fill_work_area, &seq);
-	if (!blob)
-		vpd_sequence_set_err(&seq, -ENOMEM);
-	vpd_sequence_end(&seq);
-
-	if (seq.error) {
-		vpd_blob_free(blob);
-		return ERR_PTR(seq.error);
-	}
-
-	return blob;
-}
-
-/**
- * papr_vpd_retrieve() - Return the VPD for a location code.
- * @loc_code: Location code that defines the scope of VPD to return.
- *
- * Run VPD sequences against @loc_code until a blob is successfully
- * instantiated, or a hard error is encountered, or a fatal signal is
- * pending.
- *
- * Context: May sleep.
- * Return: A fully populated VPD blob when successful. Encoded error
- * pointer otherwise.
- */
-static const struct vpd_blob *papr_vpd_retrieve(const struct papr_location_code *loc_code)
-{
-	const struct vpd_blob *blob;
-
-	/*
-	 * EAGAIN means the sequence errored with a -4 (VPD changed)
-	 * status from ibm,get-vpd, and we should attempt a new
-	 * sequence. PAPR+ v2.13 R1–7.3.20–5 indicates that this
-	 * should be a transient condition, not something that happens
-	 * continuously. But we'll stop trying on a fatal signal.
-	 */
-	do {
-		blob = papr_vpd_run_sequence(loc_code);
-		if (!IS_ERR(blob)) /* Success. */
-			break;
-		if (PTR_ERR(blob) != -EAGAIN) /* Hard error. */
-			break;
-		pr_info_ratelimited("VPD changed during retrieval, retrying\n");
-		cond_resched();
-	} while (!fatal_signal_pending(current));
-
-	return blob;
-}
-
-static ssize_t papr_vpd_handle_read(struct file *file, char __user *buf, size_t size, loff_t *off)
-{
-	const struct vpd_blob *blob = file->private_data;
-
-	/* bug: we should not instantiate a handle without any data attached. */
-	if (!vpd_blob_has_data(blob)) {
-		pr_err_once("handle without data\n");
-		return -EIO;
-	}
-
-	return simple_read_from_buffer(buf, size, off, blob->data, blob->len);
-}
-
-static int papr_vpd_handle_release(struct inode *inode, struct file *file)
-{
-	const struct vpd_blob *blob = file->private_data;
-
-	vpd_blob_free(blob);
-
-	return 0;
-}
-
-static loff_t papr_vpd_handle_seek(struct file *file, loff_t off, int whence)
-{
-	const struct vpd_blob *blob = file->private_data;
-
-	return fixed_size_llseek(file, off, whence, blob->len);
-}
-
-
 static const struct file_operations papr_vpd_handle_ops = {
-	.read = papr_vpd_handle_read,
-	.llseek = papr_vpd_handle_seek,
-	.release = papr_vpd_handle_release,
+	.read = papr_rtas_common_handle_read,
+	.llseek = papr_rtas_common_handle_seek,
+	.release = papr_rtas_common_handle_release,
 };
 
 /**
@@ -460,10 +210,9 @@ static const struct file_operations papr_vpd_handle_ops = {
  */
 static long papr_vpd_create_handle(struct papr_location_code __user *ulc)
 {
+	struct rtas_ibm_get_vpd_params vpd_params = {};
+	struct papr_rtas_sequence seq = {};
 	struct papr_location_code klc;
-	const struct vpd_blob *blob;
-	struct file *file;
-	long err;
 	int fd;
 
 	if (copy_from_user(&klc, ulc, sizeof(klc)))
@@ -472,30 +221,19 @@ static long papr_vpd_create_handle(struct papr_location_code __user *ulc)
 	if (!string_is_terminated(klc.str, ARRAY_SIZE(klc.str)))
 		return -EINVAL;
 
-	blob = papr_vpd_retrieve(&klc);
-	if (IS_ERR(blob))
-		return PTR_ERR(blob);
+	seq = (struct papr_rtas_sequence) {
+		.begin = vpd_sequence_begin,
+		.end = vpd_sequence_end,
+		.work = vpd_sequence_fill_work_area,
+	};
 
-	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
-	if (fd < 0) {
-		err = fd;
-		goto free_blob;
-	}
+	vpd_params.loc_code = &klc;
+	seq.params = (void *)&vpd_params;
+
+	fd = papr_rtas_setup_file_interface(&seq, &papr_vpd_handle_ops,
+			"[papr-vpd]");
 
-	file = anon_inode_getfile_fmode("[papr-vpd]", &papr_vpd_handle_ops,
-				  (void *)blob, O_RDONLY,
-				  FMODE_LSEEK | FMODE_PREAD);
-	if (IS_ERR(file)) {
-		err = PTR_ERR(file);
-		goto put_fd;
-	}
-	fd_install(fd, file);
 	return fd;
-put_fd:
-	put_unused_fd(fd);
-free_blob:
-	vpd_blob_free(blob);
-	return err;
 }
 
 /*
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/cpm2_pic.c linux-libre-6.16-gnu/arch/powerpc/sysdev/cpm2_pic.c
index e14493685fe8..4a59ed1d62ce 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/cpm2_pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/cpm2_pic.c
@@ -207,7 +207,7 @@ unsigned int cpm2_get_irq(void)
 
 	if (irq == 0)
 		return(-1);
-	return irq_linear_revmap(cpm2_pic_host, irq);
+	return irq_find_mapping(cpm2_pic_host, irq);
 }
 
 static int cpm2_pic_host_map(struct irq_domain *h, unsigned int virq,
@@ -259,7 +259,8 @@ void cpm2_pic_init(struct device_node *node)
 	out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
 
 	/* create a legacy host */
-	cpm2_pic_host = irq_domain_add_linear(node, 64, &cpm2_pic_host_ops, NULL);
+	cpm2_pic_host = irq_domain_create_linear(of_fwnode_handle(node), 64,
+						 &cpm2_pic_host_ops, NULL);
 	if (cpm2_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
 		return;
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/cpm_common.c linux-libre-6.16-gnu/arch/powerpc/sysdev/cpm_common.c
index 47db732981a8..e22fc638dbc7 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/cpm_common.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/cpm_common.c
@@ -138,7 +138,7 @@ static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
 	out_be32(&iop->dat, cpm2_gc->cpdata);
 }
 
-static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static int cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
@@ -150,6 +150,8 @@ static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 	__cpm2_gpio32_set(mm_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
 }
 
 static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -208,7 +210,7 @@ int cpm2_gpiochip_add32(struct device *dev)
 	gc->direction_input = cpm2_gpio32_dir_in;
 	gc->direction_output = cpm2_gpio32_dir_out;
 	gc->get = cpm2_gpio32_get;
-	gc->set = cpm2_gpio32_set;
+	gc->set_rv = cpm2_gpio32_set;
 	gc->parent = dev;
 	gc->owner = THIS_MODULE;
 
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/ehv_pic.c linux-libre-6.16-gnu/arch/powerpc/sysdev/ehv_pic.c
index fb502b72fca1..b6f9774038e1 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/ehv_pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/ehv_pic.c
@@ -175,7 +175,7 @@ unsigned int ehv_pic_get_irq(void)
 	 * this will also setup revmap[] in the slow path for the first
 	 * time, next calls will always use fast path by indexing revmap
 	 */
-	return irq_linear_revmap(global_ehv_pic->irqhost, irq);
+	return irq_find_mapping(global_ehv_pic->irqhost, irq);
 }
 
 static int ehv_pic_host_match(struct irq_domain *h, struct device_node *node,
@@ -269,8 +269,9 @@ void __init ehv_pic_init(void)
 		return;
 	}
 
-	ehv_pic->irqhost = irq_domain_add_linear(np, NR_EHV_PIC_INTS,
-						 &ehv_pic_host_ops, ehv_pic);
+	ehv_pic->irqhost = irq_domain_create_linear(of_fwnode_handle(np),
+						    NR_EHV_PIC_INTS,
+						    &ehv_pic_host_ops, ehv_pic);
 	if (!ehv_pic->irqhost) {
 		of_node_put(np);
 		kfree(ehv_pic);
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/fsl_msi.c linux-libre-6.16-gnu/arch/powerpc/sysdev/fsl_msi.c
index 7b9a5ea9cad9..4fe8a7b1b288 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/fsl_msi.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/fsl_msi.c
@@ -412,7 +412,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	}
 	platform_set_drvdata(dev, msi);
 
-	msi->irqhost = irq_domain_add_linear(dev->dev.of_node,
+	msi->irqhost = irq_domain_create_linear(of_fwnode_handle(dev->dev.of_node),
 				      NR_MSI_IRQS_MAX, &fsl_msi_host_ops, msi);
 
 	if (msi->irqhost == NULL) {
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/ge/ge_pic.c linux-libre-6.16-gnu/arch/powerpc/sysdev/ge/ge_pic.c
index a6c424680c37..0bc3f0b36528 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/ge/ge_pic.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/ge/ge_pic.c
@@ -214,8 +214,9 @@ void __init gef_pic_init(struct device_node *np)
 	}
 
 	/* Setup an irq_domain structure */
-	gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
-					  &gef_pic_host_ops, NULL);
+	gef_pic_irq_host = irq_domain_create_linear(of_fwnode_handle(np),
+						    GEF_PIC_NUM_IRQS,
+						    &gef_pic_host_ops, NULL);
 	if (gef_pic_irq_host == NULL)
 		return;
 
@@ -244,7 +245,7 @@ unsigned int gef_pic_get_irq(void)
 			if (active & (0x1 << hwirq))
 				break;
 		}
-		virq = irq_linear_revmap(gef_pic_irq_host,
+		virq = irq_find_mapping(gef_pic_irq_host,
 			(irq_hw_number_t)hwirq);
 	}
 
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/i8259.c linux-libre-6.16-gnu/arch/powerpc/sysdev/i8259.c
index 06e391485da7..99bb2b916949 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/i8259.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/i8259.c
@@ -260,8 +260,8 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
-	i8259_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
-					   &i8259_host_ops, NULL);
+	i8259_host = irq_domain_create_legacy(of_fwnode_handle(node), NR_IRQS_LEGACY, 0, 0,
+					      &i8259_host_ops, NULL);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
 		return;
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/ipic.c linux-libre-6.16-gnu/arch/powerpc/sysdev/ipic.c
index a35be0232978..70be2105865d 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/ipic.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/ipic.c
@@ -711,8 +711,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	if (ipic == NULL)
 		return NULL;
 
-	ipic->irqhost = irq_domain_add_linear(node, NR_IPIC_INTS,
-					      &ipic_host_ops, ipic);
+	ipic->irqhost = irq_domain_create_linear(of_fwnode_handle(node),
+						 NR_IPIC_INTS,
+						 &ipic_host_ops, ipic);
 	if (ipic->irqhost == NULL) {
 		kfree(ipic);
 		return NULL;
@@ -800,7 +801,7 @@ unsigned int ipic_get_irq(void)
 	if (irq == 0)    /* 0 --> no irq is pending */
 		return 0;
 
-	return irq_linear_revmap(primary_ipic->irqhost, irq);
+	return irq_find_mapping(primary_ipic->irqhost, irq);
 }
 
 #ifdef CONFIG_SUSPEND
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/mpic.c linux-libre-6.16-gnu/arch/powerpc/sysdev/mpic.c
index 4afbab83a2e2..ad7310bba00b 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/mpic.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/mpic.c
@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 #include <linux/syscore_ops.h>
 #include <linux/ratelimit.h>
 #include <linux/pgtable.h>
@@ -474,9 +475,9 @@ static void __init mpic_scan_ht_msi(struct mpic *mpic, u8 __iomem *devbase,
 		addr = addr | ((u64)readl(base + HT_MSI_ADDR_HI) << 32);
 	}
 
-	printk(KERN_DEBUG "mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%llx\n",
-		PCI_SLOT(devfn), PCI_FUNC(devfn),
-		flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled", addr);
+	pr_debug("mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%llx\n",
+		 PCI_SLOT(devfn), PCI_FUNC(devfn),
+		 str_enabled_disabled(flags & HT_MSI_FLAGS_ENABLE), addr);
 
 	if (!(flags & HT_MSI_FLAGS_ENABLE))
 		writeb(flags | HT_MSI_FLAGS_ENABLE, base + HT_MSI_FLAGS);
@@ -1483,9 +1484,9 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
-	mpic->irqhost = irq_domain_add_linear(mpic->node,
-				       intvec_top,
-				       &mpic_host_ops, mpic);
+	mpic->irqhost = irq_domain_create_linear(of_fwnode_handle(mpic->node),
+						 intvec_top,
+						 &mpic_host_ops, mpic);
 
 	/*
 	 * FIXME: The code leaks the MPIC object and mappings here; this
@@ -1785,7 +1786,7 @@ static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg)
 		return 0;
 	}
 
-	return irq_linear_revmap(mpic->irqhost, src);
+	return irq_find_mapping(mpic->irqhost, src);
 }
 
 unsigned int mpic_get_one_irq(struct mpic *mpic)
@@ -1823,7 +1824,7 @@ unsigned int mpic_get_coreint_irq(void)
 		return 0;
 	}
 
-	return irq_linear_revmap(mpic->irqhost, src);
+	return irq_find_mapping(mpic->irqhost, src);
 #else
 	return 0;
 #endif
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/tsi108_pci.c linux-libre-6.16-gnu/arch/powerpc/sysdev/tsi108_pci.c
index 0e42f7bad7db..07d0f6a83879 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/tsi108_pci.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/tsi108_pci.c
@@ -404,8 +404,8 @@ void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-	pci_irq_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
-					     &pci_irq_domain_ops, NULL);
+	pci_irq_host = irq_domain_create_legacy(of_fwnode_handle(node), NR_IRQS_LEGACY, 0, 0,
+						&pci_irq_domain_ops, NULL);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
 		return;
diff --git linux-libre-6.15-gnu/arch/powerpc/sysdev/xive/common.c linux-libre-6.16-gnu/arch/powerpc/sysdev/xive/common.c
index dc2e61837396..f10592405024 100644
--- linux-libre-6.15-gnu/arch/powerpc/sysdev/xive/common.c
+++ linux-libre-6.16-gnu/arch/powerpc/sysdev/xive/common.c
@@ -1464,7 +1464,7 @@ static const struct irq_domain_ops xive_irq_domain_ops = {
 
 static void __init xive_init_host(struct device_node *np)
 {
-	xive_irq_domain = irq_domain_add_tree(np, &xive_irq_domain_ops, NULL);
+	xive_irq_domain = irq_domain_create_tree(of_fwnode_handle(np), &xive_irq_domain_ops, NULL);
 	if (WARN_ON(xive_irq_domain == NULL))
 		return;
 	irq_set_default_domain(xive_irq_domain);
diff --git linux-libre-6.15-gnu/arch/powerpc/xmon/xmon.c linux-libre-6.16-gnu/arch/powerpc/xmon/xmon.c
index 88abffa8b54c..cb3a3244ae6f 100644
--- linux-libre-6.15-gnu/arch/powerpc/xmon/xmon.c
+++ linux-libre-6.16-gnu/arch/powerpc/xmon/xmon.c
@@ -1770,7 +1770,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 				       sp + STACK_INT_FRAME_REGS);
 				break;
 			}
-			printf("--- Exception: %lx %s at ", regs.trap,
+			printf("---- Exception: %lx %s at ", regs.trap,
 			       getvecname(TRAP(&regs)));
 			pc = regs.nip;
 			lr = regs.link;
diff --git linux-libre-6.15-gnu/arch/riscv/Kconfig linux-libre-6.16-gnu/arch/riscv/Kconfig
index bbec87b79309..1c5544401530 100644
--- linux-libre-6.15-gnu/arch/riscv/Kconfig
+++ linux-libre-6.16-gnu/arch/riscv/Kconfig
@@ -63,13 +63,15 @@ config RISCV
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
-	select ARCH_SUPPORTS_CFI_CLANG
+	# clang >= 17: https://github.com/llvm/llvm-project/commit/62fa708ceb027713b386c7e0efda994f8bdc27e2
+	select ARCH_SUPPORTS_CFI_CLANG if CLANG_VERSION >= 170000
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
 	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_HUGETLBFS if MMU
 	# LLD >= 14: https://github.com/llvm/llvm-project/issues/50505
 	select ARCH_SUPPORTS_LTO_CLANG if LLD_VERSION >= 140000
 	select ARCH_SUPPORTS_LTO_CLANG_THIN if LLD_VERSION >= 140000
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS if 64BIT && MMU
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
 	select ARCH_SUPPORTS_PER_VMA_LOCK if MMU
 	select ARCH_SUPPORTS_RT
@@ -96,9 +98,11 @@ config RISCV
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if CPU_IDLE || HIBERNATION || SUSPEND
+	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select EDAC_SUPPORT
 	select FRAME_POINTER if PERF_EVENTS || (FUNCTION_TRACER && !DYNAMIC_FTRACE)
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
+	select FUNCTION_ALIGNMENT_8B if DYNAMIC_FTRACE_WITH_CALL_OPS
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
@@ -143,6 +147,7 @@ config RISCV
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if 64BIT && MMU
 	select HAVE_ARCH_USERFAULTFD_MINOR if 64BIT && USERFAULTFD
 	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
 	select HAVE_ASM_MODVERSIONS
@@ -150,13 +155,15 @@ config RISCV
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
-	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	select FUNCTION_ALIGNMENT_4B if HAVE_DYNAMIC_FTRACE && RISCV_ISA_C
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS if HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
+	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG)
 	select HAVE_DYNAMIC_FTRACE_WITH_ARGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if HAVE_DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_FUNCTION_GRAPH_FREGS
-	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && HAVE_DYNAMIC_FTRACE
 	select HAVE_EBPF_JIT if MMU
 	select HAVE_GUP_FAST if MMU
 	select HAVE_FUNCTION_ARG_ACCESS_API
@@ -218,6 +225,7 @@ config RISCV
 	select THREAD_INFO_IN_TASK
 	select TRACE_IRQFLAGS_SUPPORT
 	select UACCESS_MEMCPY if !MMU
+	select VDSO_GETRANDOM if HAVE_GENERIC_VDSO
 	select USER_STACKTRACE_SUPPORT
 	select ZONE_DMA32 if 64BIT
 
@@ -236,6 +244,7 @@ config CLANG_SUPPORTS_DYNAMIC_FTRACE
 config GCC_SUPPORTS_DYNAMIC_FTRACE
 	def_bool CC_IS_GCC
 	depends on $(cc-option,-fpatchable-function-entry=8)
+	depends on CC_HAS_MIN_FUNCTION_ALIGNMENT || !RISCV_ISA_C
 
 config HAVE_SHADOW_CALL_STACK
 	def_bool $(cc-option,-fsanitize=shadow-call-stack)
@@ -664,12 +673,12 @@ config RISCV_ISA_V_PREEMPTIVE
 	default y
 	help
 	  Usually, in-kernel SIMD routines are run with preemption disabled.
-	  Functions which envoke long running SIMD thus must yield core's
+	  Functions which invoke long running SIMD thus must yield the core's
 	  vector unit to prevent blocking other tasks for too long.
 
-	  This config allows kernel to run SIMD without explicitly disable
-	  preemption. Enabling this config will result in higher memory
-	  consumption due to the allocation of per-task's kernel Vector context.
+	  This config allows the kernel to run SIMD without explicitly disabling
+	  preemption. Enabling this config will result in higher memory consumption
+	  due to the allocation of per-task's kernel Vector context.
 
 config RISCV_ISA_ZAWRS
 	bool "Zawrs extension support for more efficient busy waiting"
@@ -842,6 +851,21 @@ config RISCV_ISA_ZICBOZ
 
 	   If you don't know what to do here, say Y.
 
+config RISCV_ISA_ZICBOP
+	bool "Zicbop extension support for cache block prefetch"
+	depends on MMU
+	depends on RISCV_ALTERNATIVE
+	default y
+	help
+	  Adds support to dynamically detect the presence of the ZICBOP
+	  extension (Cache Block Prefetch Operations) and enable its
+	  usage.
+
+	  The Zicbop extension can be used to prefetch cache blocks for
+	  read/write fetch.
+
+	  If you don't know what to do here, say Y.
+
 config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
 	def_bool y
 	# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc
@@ -1171,8 +1195,8 @@ config CMDLINE_FALLBACK
 config CMDLINE_EXTEND
 	bool "Extend bootloader kernel arguments"
 	help
-	  The command-line arguments provided during boot will be
-	  appended to the built-in command line. This is useful in
+	  The built-in command line will be appended to the command-
+	  line arguments provided during boot. This is useful in
 	  cases where the provided arguments are insufficient and
 	  you don't want to or cannot modify them.
 
diff --git linux-libre-6.15-gnu/arch/riscv/Kconfig.socs linux-libre-6.16-gnu/arch/riscv/Kconfig.socs
index 8b503e54fa1b..a9c3d2f6debc 100644
--- linux-libre-6.15-gnu/arch/riscv/Kconfig.socs
+++ linux-libre-6.16-gnu/arch/riscv/Kconfig.socs
@@ -54,6 +54,7 @@ config ARCH_THEAD
 	bool "T-HEAD RISC-V SoCs"
 	depends on MMU && !XIP_KERNEL
 	select ERRATA_THEAD
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the RISC-V based T-HEAD SoCs.
 
diff --git linux-libre-6.15-gnu/arch/riscv/Kconfig.vendor linux-libre-6.16-gnu/arch/riscv/Kconfig.vendor
index b096548fe0ff..e14f26368963 100644
--- linux-libre-6.15-gnu/arch/riscv/Kconfig.vendor
+++ linux-libre-6.16-gnu/arch/riscv/Kconfig.vendor
@@ -16,6 +16,19 @@ config RISCV_ISA_VENDOR_EXT_ANDES
 	  If you don't know what to do here, say Y.
 endmenu
 
+menu "SiFive"
+config RISCV_ISA_VENDOR_EXT_SIFIVE
+	bool "SiFive vendor extension support"
+	select RISCV_ISA_VENDOR_EXT
+	default y
+	help
+	  Say N here if you want to disable all SiFive vendor extension
+	  support. This will cause any SiFive vendor extensions that are
+	  requested by hardware probing to be ignored.
+
+	  If you don't know what to do here, say Y.
+endmenu
+
 menu "T-Head"
 config RISCV_ISA_VENDOR_EXT_THEAD
 	bool "T-Head vendor extension support"
diff --git linux-libre-6.15-gnu/arch/riscv/Makefile linux-libre-6.16-gnu/arch/riscv/Makefile
index 539d2aef5cab..df57654a615e 100644
--- linux-libre-6.15-gnu/arch/riscv/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/Makefile
@@ -15,9 +15,9 @@ ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
 	LDFLAGS_vmlinux += --no-relax
 	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
 ifeq ($(CONFIG_RISCV_ISA_C),y)
-	CC_FLAGS_FTRACE := -fpatchable-function-entry=4
+	CC_FLAGS_FTRACE := -fpatchable-function-entry=8,4
 else
-	CC_FLAGS_FTRACE := -fpatchable-function-entry=2
+	CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2
 endif
 endif
 
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
index e0ddf8f602c7..a8bcb26f4270 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
@@ -143,7 +143,8 @@
 	};
 
 	l2cache: cache-controller@13400000 {
-		compatible = "andestech,ax45mp-cache", "cache";
+		compatible = "renesas,r9a07g043f-ax45mp-cache", "andestech,ax45mp-cache",
+			     "cache";
 		reg = <0x0 0x13400000 0x0 0x100000>;
 		interrupts = <SOC_PERIPHERAL_IRQ(476) IRQ_TYPE_LEVEL_HIGH>;
 		cache-size = <0x40000>;
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/Makefile linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/Makefile
index 47d4243a8f35..85966306801e 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/Makefile
@@ -3,3 +3,4 @@ dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += sg2044-sophgo-srd3-10.dtb
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index aa1f5df100f0..90de978f69c1 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,8 +3,11 @@
  * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
  */
 
+#define SOC_PERIPHERAL_IRQ(nr)	((nr) + 16)
+
 #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
-#include "cv18xx.dtsi"
+#include "cv180x-cpus.dtsi"
+#include "cv180x.dtsi"
 
 / {
 	compatible = "sophgo,cv1800b";
@@ -15,23 +18,37 @@
 	};
 
 	soc {
+		interrupt-parent = <&plic>;
+		dma-noncoherent;
+
 		pinctrl: pinctrl@3001000 {
 			compatible = "sophgo,cv1800b-pinctrl";
 			reg = <0x03001000 0x1000>,
 			      <0x05027000 0x1000>;
 			reg-names = "sys", "rtc";
 		};
-	};
-};
 
-&plic {
-	compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
-};
+		clk: clock-controller@3002000 {
+			compatible = "sophgo,cv1800b-clk";
+			reg = <0x03002000 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
 
-&clint {
-	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
-};
+		plic: interrupt-controller@70000000 {
+			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
 
-&clk {
-	compatible = "sophgo,cv1800-clk";
+		clint: timer@74000000 {
+			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv180x-cpus.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv180x-cpus.dtsi
new file mode 100644
index 000000000000..93fd9e47a195
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv180x-cpus.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+/ {
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv18xx.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv180x.dtsi
similarity index 75%
rename from arch/riscv/boot/dts/sophgo/cv18xx.dtsi
rename to arch/riscv/boot/dts/sophgo/cv180x.dtsi
index 58cd546392e0..ed06c3609fb2 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -12,35 +12,6 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
 	osc: oscillator {
 		compatible = "fixed-clock";
 		clock-output-names = "osc_25m";
@@ -49,18 +20,10 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&plic>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		dma-noncoherent;
 		ranges;
 
-		clk: clock-controller@3002000 {
-			reg = <0x03002000 0x1000>;
-			clocks = <&osc>;
-			#clock-cells = <1>;
-		};
-
 		gpio0: gpio@3020000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x3020000 0x1000>;
@@ -75,7 +38,7 @@
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -93,7 +56,7 @@
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -111,7 +74,7 @@
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -129,7 +92,7 @@
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -137,7 +100,7 @@
 			compatible = "sophgo,cv1800b-saradc";
 			reg = <0x030f0000 0x1000>;
 			clocks = <&clk CLK_SARADC>;
-			interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -162,7 +125,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
 			clock-names = "ref", "pclk";
-			interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -173,7 +136,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
 			clock-names = "ref", "pclk";
-			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -184,7 +147,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
 			clock-names = "ref", "pclk";
-			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -195,7 +158,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
 			clock-names = "ref", "pclk";
-			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -206,14 +169,14 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
 			clock-names = "ref", "pclk";
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		uart0: serial@4140000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
@@ -224,7 +187,7 @@
 		uart1: serial@4150000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
@@ -235,7 +198,7 @@
 		uart2: serial@4160000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
@@ -246,7 +209,7 @@
 		uart3: serial@4170000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
@@ -261,7 +224,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
 			clock-names = "ssi_clk", "pclk";
-			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -272,7 +235,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
 			clock-names = "ssi_clk", "pclk";
-			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -283,7 +246,7 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
 			clock-names = "ssi_clk", "pclk";
-			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -294,14 +257,14 @@
 			#size-cells = <0>;
 			clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
 			clock-names = "ssi_clk", "pclk";
-			interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		uart4: serial@41c0000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(32) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
 			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
@@ -312,7 +275,7 @@
 		sdhci0: mmc@4310000 {
 			compatible = "sophgo,cv1800b-dwcmshc";
 			reg = <0x4310000 0x1000>;
-			interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_AXI4_SD0>,
 				 <&clk CLK_SD0>;
 			clock-names = "core", "bus";
@@ -322,7 +285,7 @@
 		sdhci1: mmc@4320000 {
 			compatible = "sophgo,cv1800b-dwcmshc";
 			reg = <0x4320000 0x1000>;
-			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_AXI4_SD1>,
 				 <&clk CLK_SD1>;
 			clock-names = "core", "bus";
@@ -332,7 +295,7 @@
 		dmac: dma-controller@4330000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x04330000 0x1000>;
-			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(13) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>;
 			clock-names = "core-clk", "cfgr-clk";
 			#dma-cells = <1>;
@@ -344,19 +307,5 @@
 			snps,data-width = <2>;
 			status = "disabled";
 		};
-
-		plic: interrupt-controller@70000000 {
-			reg = <0x70000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			riscv,ndev = <101>;
-		};
-
-		clint: timer@74000000 {
-			reg = <0x74000000 0x10000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
-		};
 	};
 };
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
index 8a1b95c5116b..9a2a314d3347 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
@@ -3,9 +3,12 @@
  * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
  */
 
+#define SOC_PERIPHERAL_IRQ(nr)	((nr) + 16)
+
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/pinctrl-cv1812h.h>
-#include "cv18xx.dtsi"
+#include "cv180x-cpus.dtsi"
+#include "cv180x.dtsi"
 #include "cv181x.dtsi"
 
 / {
@@ -17,23 +20,37 @@
 	};
 
 	soc {
+		interrupt-parent = <&plic>;
+		dma-noncoherent;
+
 		pinctrl: pinctrl@3001000 {
 			compatible = "sophgo,cv1812h-pinctrl";
 			reg = <0x03001000 0x1000>,
 			      <0x05027000 0x1000>;
 			reg-names = "sys", "rtc";
 		};
-	};
-};
 
-&plic {
-	compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
-};
+		clk: clock-controller@3002000 {
+			compatible = "sophgo,cv1812h-clk";
+			reg = <0x03002000 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
 
-&clint {
-	compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
-};
+		plic: interrupt-controller@70000000 {
+			compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
 
-&clk {
-	compatible = "sophgo,cv1810-clk";
+		clint: timer@74000000 {
+			compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
 };
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv181x.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv181x.dtsi
index 5fd14dd1b14f..bbdb30653e9a 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/cv181x.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/cv181x.dtsi
@@ -11,7 +11,7 @@
 		emmc: mmc@4300000 {
 			compatible = "sophgo,cv1800b-dwcmshc";
 			reg = <0x4300000 0x1000>;
-			interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <SOC_PERIPHERAL_IRQ(18) IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk CLK_AXI4_EMMC>,
 				 <&clk CLK_EMMC>;
 			clock-names = "core", "bus";
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2002.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2002.dtsi
index 7f79de33163c..98001cce238e 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2002.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2002.dtsi
@@ -3,9 +3,12 @@
  * Copyright (C) 2024 Thomas Bonnefille <thomas.bonnefille@bootlin.com>
  */
 
+#define SOC_PERIPHERAL_IRQ(nr)	((nr) + 16)
+
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/pinctrl-sg2002.h>
-#include "cv18xx.dtsi"
+#include "cv180x-cpus.dtsi"
+#include "cv180x.dtsi"
 #include "cv181x.dtsi"
 
 / {
@@ -17,25 +20,39 @@
 	};
 
 	soc {
+		interrupt-parent = <&plic>;
+		dma-noncoherent;
+
 		pinctrl: pinctrl@3001000 {
 			compatible = "sophgo,sg2002-pinctrl";
 			reg = <0x03001000 0x1000>,
 			      <0x05027000 0x1000>;
 			reg-names = "sys", "rtc";
 		};
-	};
-};
 
-&plic {
-	compatible = "sophgo,sg2002-plic", "thead,c900-plic";
-};
+		clk: clock-controller@3002000 {
+			compatible = "sophgo,sg2002-clk", "sophgo,sg2000-clk";
+			reg = <0x03002000 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
 
-&clint {
-	compatible = "sophgo,sg2002-clint", "thead,c900-clint";
-};
+		plic: interrupt-controller@70000000 {
+			compatible = "sophgo,sg2002-plic", "thead,c900-plic";
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
 
-&clk {
-	compatible = "sophgo,sg2000-clk";
+		clint: timer@74000000 {
+			compatible = "sophgo,sg2002-clint", "thead,c900-clint";
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
 };
 
 &sdhci0 {
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 34645a5f6038..ef3a602172b1 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -42,6 +42,8 @@
 };
 
 &emmc {
+	pinctrl-0 = <&emmc_cfg>;
+	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
 	no-sd;
@@ -51,6 +53,8 @@
 };
 
 &i2c1 {
+	pinctrl-0 = <&i2c1_cfg>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	mcu: syscon@17 {
@@ -60,7 +64,73 @@
 	};
 };
 
+&pinctrl {
+	emmc_cfg: sdhci-emmc-cfg {
+		sdhci-emmc-wp-pins {
+			pinmux = <PINMUX(PIN_EMMC_WP, 0)>;
+			bias-disable;
+			drive-strength-microamp = <26800>;
+			input-schmitt-disable;
+		};
+
+		sdhci-emmc-cd-pins {
+			pinmux = <PINMUX(PIN_EMMC_CD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <26800>;
+			input-schmitt-enable;
+		};
+
+		sdhci-emmc-rst-pwr-pins {
+			pinmux = <PINMUX(PIN_EMMC_RST, 0)>,
+				 <PINMUX(PIN_EMMC_PWR_EN, 0)>;
+			bias-disable;
+			drive-strength-microamp = <26800>;
+			input-schmitt-disable;
+		};
+	};
+
+	i2c1_cfg: i2c1-cfg {
+		i2c1-pins {
+			pinmux = <PINMUX(PIN_IIC1_SDA, 0)>,
+				 <PINMUX(PIN_IIC1_SCL, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <26800>;
+			input-schmitt-enable;
+		};
+	};
+
+	sd_cfg: sdhci-sd-cfg {
+		sdhci-sd-cd-wp-pins {
+			pinmux = <PINMUX(PIN_SDIO_CD, 0)>,
+				 <PINMUX(PIN_SDIO_WP, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <26800>;
+			input-schmitt-enable;
+		};
+
+		sdhci-sd-rst-pwr-pins {
+			pinmux = <PINMUX(PIN_SDIO_RST, 0)>,
+				 <PINMUX(PIN_SDIO_PWR_EN, 0)>;
+			bias-disable;
+			drive-strength-microamp = <26800>;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_cfg: uart0-cfg {
+		uart0-rx-pins {
+			pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+				 <PINMUX(PIN_UART0_RX, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <26800>;
+			input-schmitt-enable;
+		};
+	};
+};
+
 &sd {
+	pinctrl-0 = <&sd_cfg>;
+	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
 	no-mmc;
@@ -69,6 +139,8 @@
 };
 
 &uart0 {
+	pinctrl-0 = <&uart0_cfg>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index aa8b7fcc125d..85636d1798f1 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/sophgo,sg2042-pll.h>
 #include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/pinctrl-sg2042.h>
 #include <dt-bindings/reset/sophgo,sg2042-reset.h>
 
 #include "sg2042-cpus.dtsi"
@@ -200,6 +201,11 @@
 			#clock-cells = <1>;
 		};
 
+		pinctrl: pinctrl@7030011000 {
+			compatible = "sophgo,sg2042-pinctrl";
+			reg = <0x70 0x30011000 0x0 0x1000>;
+		};
+
 		clkgen: clock-controller@7030012000 {
 			compatible = "sophgo,sg2042-clkgen";
 			reg = <0x70 0x30012000 0x0 0x1000>;
@@ -537,6 +543,32 @@
 			status = "disabled";
 		};
 
+		spi0: spi@7040004000 {
+			compatible = "sophgo,sg2042-spi", "snps,dw-apb-ssi";
+			reg = <0x70 0x40004000 0x00 0x1000>;
+			clocks = <&clkgen GATE_CLK_APB_SPI>;
+			interrupt-parent = <&intc>;
+			interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <2>;
+			resets = <&rstgen RST_SPI0>;
+			status = "disabled";
+		};
+
+		spi1: spi@7040005000 {
+			compatible = "sophgo,sg2042-spi", "snps,dw-apb-ssi";
+			reg = <0x70 0x40005000 0x00 0x1000>;
+			clocks = <&clkgen GATE_CLK_APB_SPI>;
+			interrupt-parent = <&intc>;
+			interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <2>;
+			resets = <&rstgen RST_SPI1>;
+			status = "disabled";
+		};
+
 		emmc: mmc@704002a000 {
 			compatible = "sophgo,sg2042-dwcmshc";
 			reg = <0x70 0x4002a000 0x0 0x1000>;
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi
new file mode 100644
index 000000000000..2a4267078ce6
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi
@@ -0,0 +1,3002 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <50000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c920", "riscv";
+			reg = <0>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache0>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "thead,c920", "riscv";
+			reg = <1>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache0>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "thead,c920", "riscv";
+			reg = <2>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache0>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "thead,c920", "riscv";
+			reg = <3>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache0>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu4: cpu@4 {
+			compatible = "thead,c920", "riscv";
+			reg = <4>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache1>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu5: cpu@5 {
+			compatible = "thead,c920", "riscv";
+			reg = <5>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache1>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu5_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu6: cpu@6 {
+			compatible = "thead,c920", "riscv";
+			reg = <6>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache1>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu6_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu7: cpu@7 {
+			compatible = "thead,c920", "riscv";
+			reg = <7>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache1>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu7_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu8: cpu@8 {
+			compatible = "thead,c920", "riscv";
+			reg = <8>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache2>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu8_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu9: cpu@9 {
+			compatible = "thead,c920", "riscv";
+			reg = <9>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache2>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu9_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu10: cpu@10 {
+			compatible = "thead,c920", "riscv";
+			reg = <10>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache2>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu10_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu11: cpu@11 {
+			compatible = "thead,c920", "riscv";
+			reg = <11>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache2>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu11_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu12: cpu@12 {
+			compatible = "thead,c920", "riscv";
+			reg = <12>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache3>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu12_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu13: cpu@13 {
+			compatible = "thead,c920", "riscv";
+			reg = <13>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache3>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu13_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu14: cpu@14 {
+			compatible = "thead,c920", "riscv";
+			reg = <14>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache3>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu14_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu15: cpu@15 {
+			compatible = "thead,c920", "riscv";
+			reg = <15>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache3>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu15_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu16: cpu@16 {
+			compatible = "thead,c920", "riscv";
+			reg = <16>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache4>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu16_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu17: cpu@17 {
+			compatible = "thead,c920", "riscv";
+			reg = <17>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache4>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu17_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu18: cpu@18 {
+			compatible = "thead,c920", "riscv";
+			reg = <18>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache4>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu18_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu19: cpu@19 {
+			compatible = "thead,c920", "riscv";
+			reg = <19>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache4>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu19_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu20: cpu@20 {
+			compatible = "thead,c920", "riscv";
+			reg = <20>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache5>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu20_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu21: cpu@21 {
+			compatible = "thead,c920", "riscv";
+			reg = <21>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache5>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu21_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu22: cpu@22 {
+			compatible = "thead,c920", "riscv";
+			reg = <22>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache5>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu22_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu23: cpu@23 {
+			compatible = "thead,c920", "riscv";
+			reg = <23>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache5>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu23_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu24: cpu@24 {
+			compatible = "thead,c920", "riscv";
+			reg = <24>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache6>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu24_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu25: cpu@25 {
+			compatible = "thead,c920", "riscv";
+			reg = <25>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache6>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu25_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu26: cpu@26 {
+			compatible = "thead,c920", "riscv";
+			reg = <26>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache6>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu26_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu27: cpu@27 {
+			compatible = "thead,c920", "riscv";
+			reg = <27>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache6>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu27_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu28: cpu@28 {
+			compatible = "thead,c920", "riscv";
+			reg = <28>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache7>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu28_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu29: cpu@29 {
+			compatible = "thead,c920", "riscv";
+			reg = <29>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache7>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu29_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu30: cpu@30 {
+			compatible = "thead,c920", "riscv";
+			reg = <30>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache7>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu30_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu31: cpu@31 {
+			compatible = "thead,c920", "riscv";
+			reg = <31>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache7>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu31_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu32: cpu@32 {
+			compatible = "thead,c920", "riscv";
+			reg = <32>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache8>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu32_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu33: cpu@33 {
+			compatible = "thead,c920", "riscv";
+			reg = <33>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache8>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu33_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu34: cpu@34 {
+			compatible = "thead,c920", "riscv";
+			reg = <34>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache8>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu34_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu35: cpu@35 {
+			compatible = "thead,c920", "riscv";
+			reg = <35>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache8>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu35_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu36: cpu@36 {
+			compatible = "thead,c920", "riscv";
+			reg = <36>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache9>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu36_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu37: cpu@37 {
+			compatible = "thead,c920", "riscv";
+			reg = <37>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache9>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu37_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu38: cpu@38 {
+			compatible = "thead,c920", "riscv";
+			reg = <38>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache9>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu38_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu39: cpu@39 {
+			compatible = "thead,c920", "riscv";
+			reg = <39>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache9>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu39_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu40: cpu@40 {
+			compatible = "thead,c920", "riscv";
+			reg = <40>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache10>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu40_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu41: cpu@41 {
+			compatible = "thead,c920", "riscv";
+			reg = <41>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache10>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu41_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu42: cpu@42 {
+			compatible = "thead,c920", "riscv";
+			reg = <42>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache10>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu42_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu43: cpu@43 {
+			compatible = "thead,c920", "riscv";
+			reg = <43>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache10>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu43_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu44: cpu@44 {
+			compatible = "thead,c920", "riscv";
+			reg = <44>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache11>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu44_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu45: cpu@45 {
+			compatible = "thead,c920", "riscv";
+			reg = <45>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache11>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu45_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu46: cpu@46 {
+			compatible = "thead,c920", "riscv";
+			reg = <46>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache11>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu46_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu47: cpu@47 {
+			compatible = "thead,c920", "riscv";
+			reg = <47>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache11>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu47_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu48: cpu@48 {
+			compatible = "thead,c920", "riscv";
+			reg = <48>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache12>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu48_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu49: cpu@49 {
+			compatible = "thead,c920", "riscv";
+			reg = <49>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache12>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu49_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu50: cpu@50 {
+			compatible = "thead,c920", "riscv";
+			reg = <50>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache12>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu50_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu51: cpu@51 {
+			compatible = "thead,c920", "riscv";
+			reg = <51>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache12>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu51_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu52: cpu@52 {
+			compatible = "thead,c920", "riscv";
+			reg = <52>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache13>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu52_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu53: cpu@53 {
+			compatible = "thead,c920", "riscv";
+			reg = <53>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache13>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu53_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu54: cpu@54 {
+			compatible = "thead,c920", "riscv";
+			reg = <54>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache13>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu54_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu55: cpu@55 {
+			compatible = "thead,c920", "riscv";
+			reg = <55>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache13>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu55_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu56: cpu@56 {
+			compatible = "thead,c920", "riscv";
+			reg = <56>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache14>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu56_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu57: cpu@57 {
+			compatible = "thead,c920", "riscv";
+			reg = <57>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache14>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu57_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu58: cpu@58 {
+			compatible = "thead,c920", "riscv";
+			reg = <58>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache14>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu58_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu59: cpu@59 {
+			compatible = "thead,c920", "riscv";
+			reg = <59>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache14>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu59_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu60: cpu@60 {
+			compatible = "thead,c920", "riscv";
+			reg = <60>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache15>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu60_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu61: cpu@61 {
+			compatible = "thead,c920", "riscv";
+			reg = <61>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache15>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu61_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu62: cpu@62 {
+			compatible = "thead,c920", "riscv";
+			reg = <62>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache15>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu62_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu63: cpu@63 {
+			compatible = "thead,c920", "riscv";
+			reg = <63>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <512>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <512>;
+			device_type = "cpu";
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache15>;
+			riscv,isa = "rv64imafdcv";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "v", "sscofpmf", "sstc",
+					       "svinval", "svnapot", "svpbmt",
+					       "zawrs", "zba", "zbb", "zbc",
+					       "zbs", "zca", "zcb", "zcd",
+					       "zfa", "zfbfmin", "zfh", "zfhmin",
+					       "zicbom", "zicbop", "zicboz",
+					       "zicntr", "zicond","zicsr", "zifencei",
+					       "zihintntl", "zihintpause", "zihpm",
+					       "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin";
+			riscv,cbom-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+
+			cpu63_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu-map {
+			socket0 {
+				cluster0 {
+					core0 {
+						cpu = <&cpu0>;
+					};
+
+					core1 {
+						cpu = <&cpu1>;
+					};
+
+					core2 {
+						cpu = <&cpu2>;
+					};
+
+					core3 {
+						cpu = <&cpu3>;
+					};
+				};
+
+				cluster1 {
+					core0 {
+						cpu = <&cpu4>;
+					};
+
+					core1 {
+						cpu = <&cpu5>;
+					};
+
+					core2 {
+						cpu = <&cpu6>;
+					};
+
+					core3 {
+						cpu = <&cpu7>;
+					};
+				};
+
+				cluster2 {
+					core0 {
+						cpu = <&cpu8>;
+					};
+
+					core1 {
+						cpu = <&cpu9>;
+					};
+
+					core2 {
+						cpu = <&cpu10>;
+					};
+
+					core3 {
+						cpu = <&cpu11>;
+					};
+				};
+
+				cluster3 {
+					core0 {
+						cpu = <&cpu12>;
+					};
+
+					core1 {
+						cpu = <&cpu13>;
+					};
+
+					core2 {
+						cpu = <&cpu14>;
+					};
+
+					core3 {
+						cpu = <&cpu15>;
+					};
+				};
+
+				cluster4 {
+					core0 {
+						cpu = <&cpu16>;
+					};
+
+					core1 {
+						cpu = <&cpu17>;
+					};
+
+					core2 {
+						cpu = <&cpu18>;
+					};
+
+					core3 {
+						cpu = <&cpu19>;
+					};
+				};
+
+				cluster5 {
+					core0 {
+						cpu = <&cpu20>;
+					};
+
+					core1 {
+						cpu = <&cpu21>;
+					};
+
+					core2 {
+						cpu = <&cpu22>;
+					};
+
+					core3 {
+						cpu = <&cpu23>;
+					};
+				};
+
+				cluster6 {
+					core0 {
+						cpu = <&cpu24>;
+					};
+
+					core1 {
+						cpu = <&cpu25>;
+					};
+
+					core2 {
+						cpu = <&cpu26>;
+					};
+
+					core3 {
+						cpu = <&cpu27>;
+					};
+				};
+
+				cluster7 {
+					core0 {
+						cpu = <&cpu28>;
+					};
+
+					core1 {
+						cpu = <&cpu29>;
+					};
+
+					core2 {
+						cpu = <&cpu30>;
+					};
+
+					core3 {
+						cpu = <&cpu31>;
+					};
+				};
+
+				cluster8 {
+					core0 {
+						cpu = <&cpu32>;
+					};
+
+					core1 {
+						cpu = <&cpu33>;
+					};
+
+					core2 {
+						cpu = <&cpu34>;
+					};
+
+					core3 {
+						cpu = <&cpu35>;
+					};
+				};
+
+				cluster9 {
+					core0 {
+						cpu = <&cpu36>;
+					};
+
+					core1 {
+						cpu = <&cpu37>;
+					};
+
+					core2 {
+						cpu = <&cpu38>;
+					};
+
+					core3 {
+						cpu = <&cpu39>;
+					};
+				};
+
+				cluster10 {
+					core0 {
+						cpu = <&cpu40>;
+					};
+
+					core1 {
+						cpu = <&cpu41>;
+					};
+
+					core2 {
+						cpu = <&cpu42>;
+					};
+
+					core3 {
+						cpu = <&cpu43>;
+					};
+				};
+
+				cluster11 {
+					core0 {
+						cpu = <&cpu44>;
+					};
+
+					core1 {
+						cpu = <&cpu45>;
+					};
+
+					core2 {
+						cpu = <&cpu46>;
+					};
+
+					core3 {
+						cpu = <&cpu47>;
+					};
+				};
+
+				cluster12 {
+					core0 {
+						cpu = <&cpu48>;
+					};
+
+					core1 {
+						cpu = <&cpu49>;
+					};
+
+					core2 {
+						cpu = <&cpu50>;
+					};
+
+					core3 {
+						cpu = <&cpu51>;
+					};
+				};
+
+				cluster13 {
+					core0 {
+						cpu = <&cpu52>;
+					};
+
+					core1 {
+						cpu = <&cpu53>;
+					};
+
+					core2 {
+						cpu = <&cpu54>;
+					};
+
+					core3 {
+						cpu = <&cpu55>;
+					};
+				};
+
+				cluster14 {
+					core0 {
+						cpu = <&cpu56>;
+					};
+
+					core1 {
+						cpu = <&cpu57>;
+					};
+
+					core2 {
+						cpu = <&cpu58>;
+					};
+
+					core3 {
+						cpu = <&cpu59>;
+					};
+				};
+
+				cluster15 {
+					core0 {
+						cpu = <&cpu60>;
+					};
+
+					core1 {
+						cpu = <&cpu61>;
+					};
+
+					core2 {
+						cpu = <&cpu62>;
+					};
+
+					core3 {
+						cpu = <&cpu63>;
+					};
+				};
+			};
+		};
+
+		l2_cache0: cache-controller-0 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache1: cache-controller-1 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache2: cache-controller-2 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache3: cache-controller-3 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache4: cache-controller-4 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache5: cache-controller-5 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache6: cache-controller-6 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache7: cache-controller-7 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache8: cache-controller-8 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache9: cache-controller-9 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache10: cache-controller-10 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache11: cache-controller-11 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache12: cache-controller-12 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache13: cache-controller-13 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache14: cache-controller-14 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache15: cache-controller-15 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <2097152>;
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: cache-controller-16 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <3>;
+			cache-size = <67108864>;
+			cache-sets = <4096>;
+			cache-unified;
+		};
+	};
+
+	soc {
+		intc: interrupt-controller@6d40000000 {
+			compatible = "sophgo,sg2044-plic", "thead,c900-plic";
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x6d 0x40000000 0x0 0x4000000>;
+			interrupt-controller;
+			interrupts-extended =
+				<&cpu0_intc 11>, <&cpu0_intc 9>,
+				<&cpu1_intc 11>, <&cpu1_intc 9>,
+				<&cpu2_intc 11>, <&cpu2_intc 9>,
+				<&cpu3_intc 11>, <&cpu3_intc 9>,
+				<&cpu4_intc 11>, <&cpu4_intc 9>,
+				<&cpu5_intc 11>, <&cpu5_intc 9>,
+				<&cpu6_intc 11>, <&cpu6_intc 9>,
+				<&cpu7_intc 11>, <&cpu7_intc 9>,
+				<&cpu8_intc 11>, <&cpu8_intc 9>,
+				<&cpu9_intc 11>, <&cpu9_intc 9>,
+				<&cpu10_intc 11>, <&cpu10_intc 9>,
+				<&cpu11_intc 11>, <&cpu11_intc 9>,
+				<&cpu12_intc 11>, <&cpu12_intc 9>,
+				<&cpu13_intc 11>, <&cpu13_intc 9>,
+				<&cpu14_intc 11>, <&cpu14_intc 9>,
+				<&cpu15_intc 11>, <&cpu15_intc 9>,
+				<&cpu16_intc 11>, <&cpu16_intc 9>,
+				<&cpu17_intc 11>, <&cpu17_intc 9>,
+				<&cpu18_intc 11>, <&cpu18_intc 9>,
+				<&cpu19_intc 11>, <&cpu19_intc 9>,
+				<&cpu20_intc 11>, <&cpu20_intc 9>,
+				<&cpu21_intc 11>, <&cpu21_intc 9>,
+				<&cpu22_intc 11>, <&cpu22_intc 9>,
+				<&cpu23_intc 11>, <&cpu23_intc 9>,
+				<&cpu24_intc 11>, <&cpu24_intc 9>,
+				<&cpu25_intc 11>, <&cpu25_intc 9>,
+				<&cpu26_intc 11>, <&cpu26_intc 9>,
+				<&cpu27_intc 11>, <&cpu27_intc 9>,
+				<&cpu28_intc 11>, <&cpu28_intc 9>,
+				<&cpu29_intc 11>, <&cpu29_intc 9>,
+				<&cpu30_intc 11>, <&cpu30_intc 9>,
+				<&cpu31_intc 11>, <&cpu31_intc 9>,
+				<&cpu32_intc 11>, <&cpu32_intc 9>,
+				<&cpu33_intc 11>, <&cpu33_intc 9>,
+				<&cpu34_intc 11>, <&cpu34_intc 9>,
+				<&cpu35_intc 11>, <&cpu35_intc 9>,
+				<&cpu36_intc 11>, <&cpu36_intc 9>,
+				<&cpu37_intc 11>, <&cpu37_intc 9>,
+				<&cpu38_intc 11>, <&cpu38_intc 9>,
+				<&cpu39_intc 11>, <&cpu39_intc 9>,
+				<&cpu40_intc 11>, <&cpu40_intc 9>,
+				<&cpu41_intc 11>, <&cpu41_intc 9>,
+				<&cpu42_intc 11>, <&cpu42_intc 9>,
+				<&cpu43_intc 11>, <&cpu43_intc 9>,
+				<&cpu44_intc 11>, <&cpu44_intc 9>,
+				<&cpu45_intc 11>, <&cpu45_intc 9>,
+				<&cpu46_intc 11>, <&cpu46_intc 9>,
+				<&cpu47_intc 11>, <&cpu47_intc 9>,
+				<&cpu48_intc 11>, <&cpu48_intc 9>,
+				<&cpu49_intc 11>, <&cpu49_intc 9>,
+				<&cpu50_intc 11>, <&cpu50_intc 9>,
+				<&cpu51_intc 11>, <&cpu51_intc 9>,
+				<&cpu52_intc 11>, <&cpu52_intc 9>,
+				<&cpu53_intc 11>, <&cpu53_intc 9>,
+				<&cpu54_intc 11>, <&cpu54_intc 9>,
+				<&cpu55_intc 11>, <&cpu55_intc 9>,
+				<&cpu56_intc 11>, <&cpu56_intc 9>,
+				<&cpu57_intc 11>, <&cpu57_intc 9>,
+				<&cpu58_intc 11>, <&cpu58_intc 9>,
+				<&cpu59_intc 11>, <&cpu59_intc 9>,
+				<&cpu60_intc 11>, <&cpu60_intc 9>,
+				<&cpu61_intc 11>, <&cpu61_intc 9>,
+				<&cpu62_intc 11>, <&cpu62_intc 9>,
+				<&cpu63_intc 11>, <&cpu63_intc 9>;
+			riscv,ndev = <863>;
+		};
+
+		aclint_mswi: interrupt-controller@6d44000000 {
+			compatible = "sophgo,sg2044-aclint-mswi", "thead,c900-aclint-mswi";
+			reg = <0x6d 0x44000000 0x0 0x4000>;
+			interrupts-extended = <&cpu0_intc 3>,
+					      <&cpu1_intc 3>,
+					      <&cpu2_intc 3>,
+					      <&cpu3_intc 3>,
+					      <&cpu4_intc 3>,
+					      <&cpu5_intc 3>,
+					      <&cpu6_intc 3>,
+					      <&cpu7_intc 3>,
+					      <&cpu8_intc 3>,
+					      <&cpu9_intc 3>,
+					      <&cpu10_intc 3>,
+					      <&cpu11_intc 3>,
+					      <&cpu12_intc 3>,
+					      <&cpu13_intc 3>,
+					      <&cpu14_intc 3>,
+					      <&cpu15_intc 3>,
+					      <&cpu16_intc 3>,
+					      <&cpu17_intc 3>,
+					      <&cpu18_intc 3>,
+					      <&cpu19_intc 3>,
+					      <&cpu20_intc 3>,
+					      <&cpu21_intc 3>,
+					      <&cpu22_intc 3>,
+					      <&cpu23_intc 3>,
+					      <&cpu24_intc 3>,
+					      <&cpu25_intc 3>,
+					      <&cpu26_intc 3>,
+					      <&cpu27_intc 3>,
+					      <&cpu28_intc 3>,
+					      <&cpu29_intc 3>,
+					      <&cpu30_intc 3>,
+					      <&cpu31_intc 3>,
+					      <&cpu32_intc 3>,
+					      <&cpu33_intc 3>,
+					      <&cpu34_intc 3>,
+					      <&cpu35_intc 3>,
+					      <&cpu36_intc 3>,
+					      <&cpu37_intc 3>,
+					      <&cpu38_intc 3>,
+					      <&cpu39_intc 3>,
+					      <&cpu40_intc 3>,
+					      <&cpu41_intc 3>,
+					      <&cpu42_intc 3>,
+					      <&cpu43_intc 3>,
+					      <&cpu44_intc 3>,
+					      <&cpu45_intc 3>,
+					      <&cpu46_intc 3>,
+					      <&cpu47_intc 3>,
+					      <&cpu48_intc 3>,
+					      <&cpu49_intc 3>,
+					      <&cpu50_intc 3>,
+					      <&cpu51_intc 3>,
+					      <&cpu52_intc 3>,
+					      <&cpu53_intc 3>,
+					      <&cpu54_intc 3>,
+					      <&cpu55_intc 3>,
+					      <&cpu56_intc 3>,
+					      <&cpu57_intc 3>,
+					      <&cpu58_intc 3>,
+					      <&cpu59_intc 3>,
+					      <&cpu60_intc 3>,
+					      <&cpu61_intc 3>,
+					      <&cpu62_intc 3>,
+					      <&cpu63_intc 3>;
+		};
+
+		aclint_mtimer: timer@6d44004000 {
+			compatible = "sophgo,sg2044-aclint-mtimer", "thead,c900-aclint-mtimer";
+			reg = <0x6d 0x44004000 0x0 0x8000>;
+			reg-names = "mtimecmp";
+			interrupts-extended = <&cpu0_intc 7>,
+					      <&cpu1_intc 7>,
+					      <&cpu2_intc 7>,
+					      <&cpu3_intc 7>,
+					      <&cpu4_intc 7>,
+					      <&cpu5_intc 7>,
+					      <&cpu6_intc 7>,
+					      <&cpu7_intc 7>,
+					      <&cpu8_intc 7>,
+					      <&cpu9_intc 7>,
+					      <&cpu10_intc 7>,
+					      <&cpu11_intc 7>,
+					      <&cpu12_intc 7>,
+					      <&cpu13_intc 7>,
+					      <&cpu14_intc 7>,
+					      <&cpu15_intc 7>,
+					      <&cpu16_intc 7>,
+					      <&cpu17_intc 7>,
+					      <&cpu18_intc 7>,
+					      <&cpu19_intc 7>,
+					      <&cpu20_intc 7>,
+					      <&cpu21_intc 7>,
+					      <&cpu22_intc 7>,
+					      <&cpu23_intc 7>,
+					      <&cpu24_intc 7>,
+					      <&cpu25_intc 7>,
+					      <&cpu26_intc 7>,
+					      <&cpu27_intc 7>,
+					      <&cpu28_intc 7>,
+					      <&cpu29_intc 7>,
+					      <&cpu30_intc 7>,
+					      <&cpu31_intc 7>,
+					      <&cpu32_intc 7>,
+					      <&cpu33_intc 7>,
+					      <&cpu34_intc 7>,
+					      <&cpu35_intc 7>,
+					      <&cpu36_intc 7>,
+					      <&cpu37_intc 7>,
+					      <&cpu38_intc 7>,
+					      <&cpu39_intc 7>,
+					      <&cpu40_intc 7>,
+					      <&cpu41_intc 7>,
+					      <&cpu42_intc 7>,
+					      <&cpu43_intc 7>,
+					      <&cpu44_intc 7>,
+					      <&cpu45_intc 7>,
+					      <&cpu46_intc 7>,
+					      <&cpu47_intc 7>,
+					      <&cpu48_intc 7>,
+					      <&cpu49_intc 7>,
+					      <&cpu50_intc 7>,
+					      <&cpu51_intc 7>,
+					      <&cpu52_intc 7>,
+					      <&cpu53_intc 7>,
+					      <&cpu54_intc 7>,
+					      <&cpu55_intc 7>,
+					      <&cpu56_intc 7>,
+					      <&cpu57_intc 7>,
+					      <&cpu58_intc 7>,
+					      <&cpu59_intc 7>,
+					      <&cpu60_intc 7>,
+					      <&cpu61_intc 7>,
+					      <&cpu62_intc 7>,
+					      <&cpu63_intc 7>;
+		};
+
+		aclint_sswi: interrupt-controller@6d4400c000 {
+			compatible = "sophgo,sg2044-aclint-sswi", "thead,c900-aclint-sswi";
+			reg = <0x6d 0x4400c000 0x0 0x1000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 1>,
+					      <&cpu1_intc 1>,
+					      <&cpu2_intc 1>,
+					      <&cpu3_intc 1>,
+					      <&cpu4_intc 1>,
+					      <&cpu5_intc 1>,
+					      <&cpu6_intc 1>,
+					      <&cpu7_intc 1>,
+					      <&cpu8_intc 1>,
+					      <&cpu9_intc 1>,
+					      <&cpu10_intc 1>,
+					      <&cpu11_intc 1>,
+					      <&cpu12_intc 1>,
+					      <&cpu13_intc 1>,
+					      <&cpu14_intc 1>,
+					      <&cpu15_intc 1>,
+					      <&cpu16_intc 1>,
+					      <&cpu17_intc 1>,
+					      <&cpu18_intc 1>,
+					      <&cpu19_intc 1>,
+					      <&cpu20_intc 1>,
+					      <&cpu21_intc 1>,
+					      <&cpu22_intc 1>,
+					      <&cpu23_intc 1>,
+					      <&cpu24_intc 1>,
+					      <&cpu25_intc 1>,
+					      <&cpu26_intc 1>,
+					      <&cpu27_intc 1>,
+					      <&cpu28_intc 1>,
+					      <&cpu29_intc 1>,
+					      <&cpu30_intc 1>,
+					      <&cpu31_intc 1>,
+					      <&cpu32_intc 1>,
+					      <&cpu33_intc 1>,
+					      <&cpu34_intc 1>,
+					      <&cpu35_intc 1>,
+					      <&cpu36_intc 1>,
+					      <&cpu37_intc 1>,
+					      <&cpu38_intc 1>,
+					      <&cpu39_intc 1>,
+					      <&cpu40_intc 1>,
+					      <&cpu41_intc 1>,
+					      <&cpu42_intc 1>,
+					      <&cpu43_intc 1>,
+					      <&cpu44_intc 1>,
+					      <&cpu45_intc 1>,
+					      <&cpu46_intc 1>,
+					      <&cpu47_intc 1>,
+					      <&cpu48_intc 1>,
+					      <&cpu49_intc 1>,
+					      <&cpu50_intc 1>,
+					      <&cpu51_intc 1>,
+					      <&cpu52_intc 1>,
+					      <&cpu53_intc 1>,
+					      <&cpu54_intc 1>,
+					      <&cpu55_intc 1>,
+					      <&cpu56_intc 1>,
+					      <&cpu57_intc 1>,
+					      <&cpu58_intc 1>,
+					      <&cpu59_intc 1>,
+					      <&cpu60_intc 1>,
+					      <&cpu61_intc 1>,
+					      <&cpu62_intc 1>,
+					      <&cpu63_intc 1>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2044-reset.h linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-reset.h
new file mode 100644
index 000000000000..3a7bbfdb4bae
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-reset.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
+ */
+
+#ifndef _SG2044_RESET_H
+#define _SG2044_RESET_H
+
+#define RST_AP_SYS			0
+#define RST_AP_SYS_CORE0		1
+#define RST_AP_SYS_CORE1		2
+#define RST_AP_SYS_CORE2		3
+#define RST_AP_SYS_CORE3		4
+#define RST_AP_PIC			5
+#define RST_AP_TDT			6
+#define RST_RP_PIC_TDT			7
+#define RST_HSDMA			8
+#define RST_SYSDMA			9
+#define RST_EFUSE0			10
+#define RST_EFUSE1			11
+#define RST_RTC				12
+#define RST_TIMER			13
+#define RST_WDT				14
+#define RST_AHB_ROM0			15
+#define RST_AHB_ROM1			16
+#define RST_I2C0			17
+#define RST_I2C1			18
+#define RST_I2C2			19
+#define RST_I2C3			20
+#define RST_GPIO0			21
+#define RST_GPIO1			22
+#define RST_GPIO2			23
+#define RST_PWM				24
+#define RST_AXI_SRAM0			25
+#define RST_AXI_SRAM1			26
+#define RST_SPIFMC0			27
+#define RST_SPIFMC1			28
+#define RST_MAILBOX			29
+#define RST_ETH0			30
+#define RST_EMMC			31
+#define RST_SD				32
+#define RST_UART0			33
+#define RST_UART1			34
+#define RST_UART2			35
+#define RST_UART3			36
+#define RST_SPI0			37
+#define RST_SPI1			38
+#define RST_MTLI			39
+#define RST_DBG_I2C			40
+#define RST_C2C0			41
+#define RST_C2C1			42
+#define RST_C2C2			43
+#define RST_C2C3			44
+#define RST_CXP				45
+#define RST_DDR0			46
+#define RST_DDR1			47
+#define RST_DDR2			48
+#define RST_DDR3			49
+#define RST_DDR4			50
+#define RST_DDR5			51
+#define RST_DDR6			52
+#define RST_DDR7			53
+#define RST_DDR8			54
+#define RST_DDR9			55
+#define RST_DDR10			56
+#define RST_DDR11			57
+#define RST_DDR12			58
+#define RST_DDR13			59
+#define RST_DDR14			60
+#define RST_DDR15			61
+#define RST_BAR				62
+#define RST_K2K				63
+#define RST_CC_SYS_X1Y1			64
+#define RST_CC_SYS_X1Y2			65
+#define RST_CC_SYS_X1Y3			66
+#define RST_CC_SYS_X1Y4			67
+#define RST_CC_SYS_X0Y1			68
+#define RST_CC_SYS_X0Y2			69
+#define RST_CC_SYS_X0Y3			70
+#define RST_CC_SYS_X0Y4			71
+#define RST_SC_X1Y1			80
+#define RST_SC_X1Y2			81
+#define RST_SC_X1Y3			82
+#define RST_SC_X1Y4			83
+#define RST_SC_X0Y1			84
+#define RST_SC_X0Y2			85
+#define RST_SC_X0Y3			86
+#define RST_SC_X0Y4			87
+#define RST_RP_CLUSTER_X1Y1_S0		160
+#define RST_RP_CLUSTER_X1Y1_S1		161
+#define RST_RP_CLUSTER_X1Y2_S0		162
+#define RST_RP_CLUSTER_X1Y2_S1		163
+#define RST_RP_CLUSTER_X1Y3_S0		164
+#define RST_RP_CLUSTER_X1Y3_S1		165
+#define RST_RP_CLUSTER_X1Y4_S0		166
+#define RST_RP_CLUSTER_X1Y4_S1		167
+#define RST_RP_CLUSTER_X0Y1_W0		168
+#define RST_RP_CLUSTER_X0Y1_W1		169
+#define RST_RP_CLUSTER_X0Y2_W0		170
+#define RST_RP_CLUSTER_X0Y2_W1		171
+#define RST_RP_CLUSTER_X0Y3_W0		172
+#define RST_RP_CLUSTER_X0Y3_W1		173
+#define RST_RP_CLUSTER_X0Y4_W0		174
+#define RST_RP_CLUSTER_X0Y4_W1		175
+#define RST_TPSYS_X1Y1			180
+#define RST_TPSYS_X1Y2			181
+#define RST_TPSYS_X1Y3			182
+#define RST_TPSYS_X1Y4			183
+#define RST_TPSYS_X0Y1			184
+#define RST_TPSYS_X0Y2			185
+#define RST_TPSYS_X0Y3			186
+#define RST_TPSYS_X0Y4			187
+#define RST_SPACC			188
+#define RST_PKA				189
+#define RST_SE_TRNG			190
+#define RST_SE_DBG			191
+#define RST_SE_FAB_FW			192
+#define RST_SE_CTRL			193
+#define RST_MAILBOX0			194
+#define RST_MAILBOX1			195
+#define RST_MAILBOX2			196
+#define RST_MAILBOX3			197
+#define RST_INTC0			198
+#define RST_INTC1			199
+#define RST_INTC2			200
+#define RST_INTC3			201
+
+#endif /* _DT_BINDINGS_SG2044_RESET_H */
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts
new file mode 100644
index 000000000000..54cdf4239d5f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sg2044.dtsi"
+
+/ {
+	model = "Sophgo SG2044 SRD3-10";
+	compatible = "sophgo,srd3-10", "sophgo,sg2044";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/sophgo/sg2044.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044.dtsi
new file mode 100644
index 000000000000..d67e45f77d6e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/sophgo/sg2044.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "sg2044-cpus.dtsi"
+#include "sg2044-reset.h"
+
+/ {
+	compatible = "sophgo,sg2044";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000010 0x00000000>;
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@7030000000 {
+			compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
+			reg = <0x70 0x30000000 0x0 0x1000>;
+			clock-frequency = <500000000>;
+			interrupt-parent = <&intc>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst RST_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7030001000 {
+			compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
+			reg = <0x70 0x30001000 0x0 0x1000>;
+			clock-frequency = <500000000>;
+			interrupt-parent = <&intc>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst RST_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7030002000 {
+			compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
+			reg = <0x70 0x30002000 0x0 0x1000>;
+			clock-frequency = <500000000>;
+			interrupt-parent = <&intc>;
+			interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst RST_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7030003000 {
+			compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
+			reg = <0x70 0x30003000 0x0 0x1000>;
+			clock-frequency = <500000000>;
+			interrupt-parent = <&intc>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst RST_UART3>;
+			status = "disabled";
+		};
+
+		rst: reset-controller@7050003000 {
+			compatible = "sophgo,sg2044-reset",
+				     "sophgo,sg2042-reset";
+			reg = <0x70 0x50003000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 1d617b40a2d5..816ef1bc358e 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -17,6 +17,17 @@
 	chosen {
 		stdout-path = "serial0";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "sys-led";
+			gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
 };
 
 &uart0 {
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index a8eac5517f85..283663647a86 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -7,6 +7,9 @@
 
 #define K1_PADCONF(pin, func) (((pin) << 16) | (func))
 
+/* Map GPIO pin to each bank's <index, offset> */
+#define K1_GPIO(x)	(x / 32) (x % 32)
+
 &pinctrl {
 	uart0_2_cfg: uart0-2-cfg {
 		uart0-2-pins {
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1.dtsi
index c670ebf8fa12..c0f8c5fca975 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -3,6 +3,8 @@
  * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
  */
 
+#include <dt-bindings/clock/spacemit,k1-syscon.h>
+
 /dts-v1/;
 / {
 	#address-cells = <2>;
@@ -306,6 +308,36 @@
 		};
 	};
 
+	clocks {
+		vctcxo_1m: clock-1m {
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+			clock-output-names = "vctcxo_1m";
+			#clock-cells = <0>;
+		};
+
+		vctcxo_24m: clock-24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "vctcxo_24m";
+			#clock-cells = <0>;
+		};
+
+		vctcxo_3m: clock-3m {
+			compatible = "fixed-clock";
+			clock-frequency = <3000000>;
+			clock-output-names = "vctcxo_3m";
+			#clock-cells = <0>;
+		};
+
+		osc_32k: clock-32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			clock-output-names = "osc_32k";
+			#clock-cells = <0>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -314,11 +346,24 @@
 		dma-noncoherent;
 		ranges;
 
+		syscon_apbc: system-controller@d4015000 {
+			compatible = "spacemit,k1-syscon-apbc";
+			reg = <0x0 0xd4015000 0x0 0x1000>;
+			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
+				 <&vctcxo_24m>;
+			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
+				      "vctcxo_24m";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		uart0: serial@d4017000 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017000 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART0>,
+				 <&syscon_apbc CLK_UART0_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <42>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -327,8 +372,10 @@
 		uart2: serial@d4017100 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017100 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART2>,
+				 <&syscon_apbc CLK_UART2_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <44>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -337,8 +384,10 @@
 		uart3: serial@d4017200 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017200 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART3>,
+				 <&syscon_apbc CLK_UART3_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <45>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -347,8 +396,10 @@
 		uart4: serial@d4017300 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017300 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART4>,
+				 <&syscon_apbc CLK_UART4_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <46>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -357,8 +408,10 @@
 		uart5: serial@d4017400 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017400 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART5>,
+				 <&syscon_apbc CLK_UART5_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <47>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -367,8 +420,10 @@
 		uart6: serial@d4017500 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017500 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART6>,
+				 <&syscon_apbc CLK_UART6_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <48>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -377,8 +432,10 @@
 		uart7: serial@d4017600 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017600 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART7>,
+				 <&syscon_apbc CLK_UART7_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <49>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -387,8 +444,10 @@
 		uart8: serial@d4017700 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017700 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART8>,
+				 <&syscon_apbc CLK_UART8_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <50>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -397,16 +456,71 @@
 		uart9: serial@d4017800 {
 			compatible = "spacemit,k1-uart", "intel,xscale-uart";
 			reg = <0x0 0xd4017800 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_UART9>,
+				 <&syscon_apbc CLK_UART9_BUS>;
+			clock-names = "core", "bus";
 			interrupts = <51>;
-			clock-frequency = <14857000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
 		};
 
+		gpio: gpio@d4019000 {
+			compatible = "spacemit,k1-gpio";
+			reg = <0x0 0xd4019000 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_GPIO>,
+				 <&syscon_apbc CLK_GPIO_BUS>;
+			clock-names = "core", "bus";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupts = <58>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			gpio-ranges = <&pinctrl 0 0 0 32>,
+				      <&pinctrl 1 0 32 32>,
+				      <&pinctrl 2 0 64 32>,
+				      <&pinctrl 3 0 96 32>;
+		};
+
 		pinctrl: pinctrl@d401e000 {
 			compatible = "spacemit,k1-pinctrl";
 			reg = <0x0 0xd401e000 0x0 0x400>;
+			clocks = <&syscon_apbc CLK_AIB>,
+				 <&syscon_apbc CLK_AIB_BUS>;
+			clock-names = "func", "bus";
+		};
+
+		syscon_mpmu: system-controller@d4050000 {
+			compatible = "spacemit,k1-syscon-mpmu";
+			reg = <0x0 0xd4050000 0x0 0x209c>;
+			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
+				 <&vctcxo_24m>;
+			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
+				      "vctcxo_24m";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pll: clock-controller@d4090000 {
+			compatible = "spacemit,k1-pll";
+			reg = <0x0 0xd4090000 0x0 0x1000>;
+			clocks = <&vctcxo_24m>;
+			spacemit,mpmu = <&syscon_mpmu>;
+			#clock-cells = <1>;
+		};
+
+		syscon_apmu: system-controller@d4282800 {
+			compatible = "spacemit,k1-syscon-apmu";
+			reg = <0x0 0xd4282800 0x0 0x400>;
+			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
+				 <&vctcxo_24m>;
+			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
+				      "vctcxo_24m";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		plic: interrupt-controller@e0000000 {
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/starfive/jh7110-common.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c2f70f5e2918..4baeb981d4df 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -8,6 +8,7 @@
 #include "jh7110.dtsi"
 #include "jh7110-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
 
 / {
 	aliases {
@@ -28,6 +29,7 @@
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x1 0x0>;
+		bootph-pre-ram;
 	};
 
 	gpio-restart {
@@ -245,6 +247,13 @@
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		bootph-pre-ram;
+		pagesize = <16>;
+	};
 };
 
 &i2c6 {
@@ -262,6 +271,7 @@
 	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
 	assigned-clock-rates = <50000000>;
 	bus-width = <8>;
+	bootph-pre-ram;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
@@ -279,6 +289,7 @@
 	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
 	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
+	bootph-pre-ram;
 	no-sdio;
 	no-mmc;
 	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
@@ -317,8 +328,9 @@
 	nor_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		cdns,read-delay = <5>;
-		spi-max-frequency = <12000000>;
+		bootph-pre-ram;
+		cdns,read-delay = <2>;
+		spi-max-frequency = <100000000>;
 		cdns,tshsl-ns = <1>;
 		cdns,tsd2d-ns = <1>;
 		cdns,tchsh-ns = <1>;
@@ -353,9 +365,17 @@
 };
 
 &syscrg {
-	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+			  <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+			  <&syscrg JH7110_SYSCLK_QSPI_REF>,
+			  <&syscrg JH7110_SYSCLK_CPU_CORE>,
 			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
-	assigned-clock-rates = <500000000>, <1500000000>;
+	assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1500000000>;
 };
 
 &sysgpio {
@@ -388,6 +408,8 @@
 	};
 
 	i2c5_pins: i2c5-0 {
+		bootph-pre-ram;
+
 		i2c-pins {
 			pinmux = <GPIOMUX(19, GPOUT_LOW,
 					      GPOEN_SYS_I2C5_CLK,
@@ -396,6 +418,7 @@
 					      GPOEN_SYS_I2C5_DATA,
 					      GPI_SYS_I2C5_DATA)>;
 			bias-disable; /* external pull-up */
+			bootph-pre-ram;
 			input-enable;
 			input-schmitt-enable;
 		};
@@ -428,16 +451,16 @@
 		};
 
 		mmc-pins {
-			pinmux = <PINMUX(64, 0)>,
-				 <PINMUX(65, 0)>,
-				 <PINMUX(66, 0)>,
-				 <PINMUX(67, 0)>,
-				 <PINMUX(68, 0)>,
-				 <PINMUX(69, 0)>,
-				 <PINMUX(70, 0)>,
-				 <PINMUX(71, 0)>,
-				 <PINMUX(72, 0)>,
-				 <PINMUX(73, 0)>;
+			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
+				 <PINMUX(PAD_SD0_CMD, 0)>,
+				 <PINMUX(PAD_SD0_DATA0, 0)>,
+				 <PINMUX(PAD_SD0_DATA1, 0)>,
+				 <PINMUX(PAD_SD0_DATA2, 0)>,
+				 <PINMUX(PAD_SD0_DATA3, 0)>,
+				 <PINMUX(PAD_SD0_DATA4, 0)>,
+				 <PINMUX(PAD_SD0_DATA5, 0)>,
+				 <PINMUX(PAD_SD0_DATA6, 0)>,
+				 <PINMUX(PAD_SD0_DATA7, 0)>;
 			bias-pull-up;
 			drive-strength = <12>;
 			input-enable;
@@ -624,6 +647,7 @@
 };
 
 &uart0 {
+	bootph-pre-ram;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts linux-libre-6.16-gnu/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
index 8d9ce8b69a71..f2857d021d68 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
@@ -43,9 +43,28 @@
 			slew-rate = <0>;
 		};
 	};
+
+	usb0_pins: usb0-0 {
+		vbus-pins {
+			pinmux = <GPIOMUX(25,  GPOUT_SYS_USB_DRIVE_VBUS,
+					       GPOEN_ENABLE,
+					       GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
 };
 
 &usb0 {
 	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
 	status = "okay";
 };
+
+&usb_cdns3 {
+	phys = <&usbphy0>, <&pciephy0>;
+	phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
+};
diff --git linux-libre-6.15-gnu/arch/riscv/boot/dts/thead/th1520.dtsi linux-libre-6.16-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
index 527336417765..1db0054c4e09 100644
--- linux-libre-6.15-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
+++ linux-libre-6.16-gnu/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/thead,th1520-clk-ap.h>
+#include <dt-bindings/power/thead,th1520-power.h>
 
 / {
 	compatible = "thead,th1520";
@@ -229,6 +230,13 @@
 		snps,blen = <0 0 64 32 0 0 0>;
 	};
 
+	aon: aon {
+		compatible = "thead,th1520-aon";
+		mboxes = <&mbox_910t 1>;
+		mbox-names = "aon";
+		#power-domain-cells = <1>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -489,6 +497,19 @@
 			#clock-cells = <1>;
 		};
 
+		rst: reset-controller@ffef528000 {
+			compatible = "thead,th1520-reset";
+			reg = <0xff 0xef528000 0x0 0x4f>;
+			#reset-cells = <1>;
+		};
+
+		clk_vo: clock-controller@ffef528050 {
+			compatible = "thead,th1520-clk-vo";
+			reg = <0xff 0xef528050 0x0 0xfb0>;
+			clocks = <&clk CLK_VIDEO_PLL>;
+			#clock-cells = <1>;
+		};
+
 		dmac0: dma-controller@ffefc00000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0xff 0xefc00000 0x0 0x1000>;
diff --git linux-libre-6.15-gnu/arch/riscv/configs/defconfig linux-libre-6.16-gnu/arch/riscv/configs/defconfig
index 3c8e16d71e17..fe8bd8afb418 100644
--- linux-libre-6.15-gnu/arch/riscv/configs/defconfig
+++ linux-libre-6.16-gnu/arch/riscv/configs/defconfig
@@ -18,12 +18,9 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_BPF=y
-CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_PROFILING=y
 CONFIG_ARCH_MICROCHIP=y
 CONFIG_ARCH_SIFIVE=y
@@ -169,6 +166,7 @@ CONFIG_PINCTRL_SOPHGO_SG2002=y
 CONFIG_PINCTRL_TH1520=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_SIFIVE=y
+CONFIG_GPIO_SPACEMIT_K1=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_SENSORS_SFCTEMP=m
 CONFIG_CPU_THERMAL=y
@@ -181,6 +179,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_VIDEO_CADENCE_CSI2RX=m
 CONFIG_DRM=m
 CONFIG_DRM_RADEON=m
@@ -250,6 +249,8 @@ CONFIG_CLK_SOPHGO_CV1800=y
 CONFIG_CLK_SOPHGO_SG2042_PLL=y
 CONFIG_CLK_SOPHGO_SG2042_CLKGEN=y
 CONFIG_CLK_SOPHGO_SG2042_RPGATE=y
+CONFIG_SPACEMIT_CCU=y
+CONFIG_SPACEMIT_K1_CCU=y
 CONFIG_SUN8I_DE2_CCU=m
 CONFIG_SUN50I_IOMMU=y
 CONFIG_RPMSG_CHAR=y
@@ -294,25 +295,7 @@ CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_DEV_VIRTIO=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_PAGEALLOC=y
-CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_VM_PGFLAGS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_PER_CPU_MAPS=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-CONFIG_WQ_WATCHDOG=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PLIST=y
-CONFIG_DEBUG_SG=y
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_EQS_DEBUG=y
-# CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/Kconfig linux-libre-6.16-gnu/arch/riscv/crypto/Kconfig
index c67095a3d669..cd9b776602f8 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/riscv/crypto/Kconfig
@@ -18,16 +18,6 @@ config CRYPTO_AES_RISCV64
 	  - Zvkb vector crypto extension (CTR)
 	  - Zvkg vector crypto extension (XTS)
 
-config CRYPTO_CHACHA_RISCV64
-	tristate "Ciphers: ChaCha"
-	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
-	select CRYPTO_SKCIPHER
-	help
-	  Length-preserving ciphers: ChaCha20 stream cipher algorithm
-
-	  Architecture: riscv64 using:
-	  - Zvkb vector crypto extension
-
 config CRYPTO_GHASH_RISCV64
 	tristate "Hash functions: GHASH"
 	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
@@ -38,17 +28,6 @@ config CRYPTO_GHASH_RISCV64
 	  Architecture: riscv64 using:
 	  - Zvkg vector crypto extension
 
-config CRYPTO_SHA256_RISCV64
-	tristate "Hash functions: SHA-224 and SHA-256"
-	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
-	select CRYPTO_SHA256
-	help
-	  SHA-224 and SHA-256 secure hash algorithm (FIPS 180)
-
-	  Architecture: riscv64 using:
-	  - Zvknha or Zvknhb vector crypto extensions
-	  - Zvkb vector crypto extension
-
 config CRYPTO_SHA512_RISCV64
 	tristate "Hash functions: SHA-384 and SHA-512"
 	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
@@ -64,7 +43,7 @@ config CRYPTO_SM3_RISCV64
 	tristate "Hash functions: SM3 (ShangMi 3)"
 	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 	help
 	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
 
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/Makefile linux-libre-6.16-gnu/arch/riscv/crypto/Makefile
index 247c7bc7288c..e10e8257734e 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/crypto/Makefile
@@ -4,15 +4,9 @@ obj-$(CONFIG_CRYPTO_AES_RISCV64) += aes-riscv64.o
 aes-riscv64-y := aes-riscv64-glue.o aes-riscv64-zvkned.o \
 		 aes-riscv64-zvkned-zvbb-zvkg.o aes-riscv64-zvkned-zvkb.o
 
-obj-$(CONFIG_CRYPTO_CHACHA_RISCV64) += chacha-riscv64.o
-chacha-riscv64-y := chacha-riscv64-glue.o chacha-riscv64-zvkb.o
-
 obj-$(CONFIG_CRYPTO_GHASH_RISCV64) += ghash-riscv64.o
 ghash-riscv64-y := ghash-riscv64-glue.o ghash-riscv64-zvkg.o
 
-obj-$(CONFIG_CRYPTO_SHA256_RISCV64) += sha256-riscv64.o
-sha256-riscv64-y := sha256-riscv64-glue.o sha256-riscv64-zvknha_or_zvknhb-zvkb.o
-
 obj-$(CONFIG_CRYPTO_SHA512_RISCV64) += sha512-riscv64.o
 sha512-riscv64-y := sha512-riscv64-glue.o sha512-riscv64-zvknhb-zvkb.o
 
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/chacha-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/crypto/chacha-riscv64-glue.c
deleted file mode 100644
index 10b46f36375a..000000000000
--- linux-libre-6.15-gnu/arch/riscv/crypto/chacha-riscv64-glue.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ChaCha20 using the RISC-V vector crypto extensions
- *
- * Copyright (C) 2023 SiFive, Inc.
- * Author: Jerry Shih <jerry.shih@sifive.com>
- */
-
-#include <asm/simd.h>
-#include <asm/vector.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/linkage.h>
-#include <linux/module.h>
-
-asmlinkage void chacha20_zvkb(const u32 key[8], const u8 *in, u8 *out,
-			      size_t len, const u32 iv[4]);
-
-static int riscv64_chacha20_crypt(struct skcipher_request *req)
-{
-	u32 iv[CHACHA_IV_SIZE / sizeof(u32)];
-	u8 block_buffer[CHACHA_BLOCK_SIZE];
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	const struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	unsigned int tail_bytes;
-	int err;
-
-	iv[0] = get_unaligned_le32(req->iv);
-	iv[1] = get_unaligned_le32(req->iv + 4);
-	iv[2] = get_unaligned_le32(req->iv + 8);
-	iv[3] = get_unaligned_le32(req->iv + 12);
-
-	err = skcipher_walk_virt(&walk, req, false);
-	while (walk.nbytes) {
-		nbytes = walk.nbytes & ~(CHACHA_BLOCK_SIZE - 1);
-		tail_bytes = walk.nbytes & (CHACHA_BLOCK_SIZE - 1);
-		kernel_vector_begin();
-		if (nbytes) {
-			chacha20_zvkb(ctx->key, walk.src.virt.addr,
-				      walk.dst.virt.addr, nbytes, iv);
-			iv[0] += nbytes / CHACHA_BLOCK_SIZE;
-		}
-		if (walk.nbytes == walk.total && tail_bytes > 0) {
-			memcpy(block_buffer, walk.src.virt.addr + nbytes,
-			       tail_bytes);
-			chacha20_zvkb(ctx->key, block_buffer, block_buffer,
-				      CHACHA_BLOCK_SIZE, iv);
-			memcpy(walk.dst.virt.addr + nbytes, block_buffer,
-			       tail_bytes);
-			tail_bytes = 0;
-		}
-		kernel_vector_end();
-
-		err = skcipher_walk_done(&walk, tail_bytes);
-	}
-
-	return err;
-}
-
-static struct skcipher_alg riscv64_chacha_alg = {
-	.setkey = chacha20_setkey,
-	.encrypt = riscv64_chacha20_crypt,
-	.decrypt = riscv64_chacha20_crypt,
-	.min_keysize = CHACHA_KEY_SIZE,
-	.max_keysize = CHACHA_KEY_SIZE,
-	.ivsize = CHACHA_IV_SIZE,
-	.chunksize = CHACHA_BLOCK_SIZE,
-	.walksize = 4 * CHACHA_BLOCK_SIZE,
-	.base = {
-		.cra_blocksize = 1,
-		.cra_ctxsize = sizeof(struct chacha_ctx),
-		.cra_priority = 300,
-		.cra_name = "chacha20",
-		.cra_driver_name = "chacha20-riscv64-zvkb",
-		.cra_module = THIS_MODULE,
-	},
-};
-
-static int __init riscv64_chacha_mod_init(void)
-{
-	if (riscv_isa_extension_available(NULL, ZVKB) &&
-	    riscv_vector_vlen() >= 128)
-		return crypto_register_skcipher(&riscv64_chacha_alg);
-
-	return -ENODEV;
-}
-
-static void __exit riscv64_chacha_mod_exit(void)
-{
-	crypto_unregister_skcipher(&riscv64_chacha_alg);
-}
-
-module_init(riscv64_chacha_mod_init);
-module_exit(riscv64_chacha_mod_exit);
-
-MODULE_DESCRIPTION("ChaCha20 (RISC-V accelerated)");
-MODULE_AUTHOR("Jerry Shih <jerry.shih@sifive.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CRYPTO("chacha20");
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/ghash-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/crypto/ghash-riscv64-glue.c
index 312e7891fd0a..d86073d25387 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/ghash-riscv64-glue.c
+++ linux-libre-6.16-gnu/arch/riscv/crypto/ghash-riscv64-glue.c
@@ -11,11 +11,16 @@
 
 #include <asm/simd.h>
 #include <asm/vector.h>
+#include <crypto/b128ops.h>
+#include <crypto/gf128mul.h>
 #include <crypto/ghash.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
-#include <linux/linkage.h>
+#include <crypto/utils.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
 
 asmlinkage void ghash_zvkg(be128 *accumulator, const be128 *key, const u8 *data,
 			   size_t len);
@@ -26,8 +31,6 @@ struct riscv64_ghash_tfm_ctx {
 
 struct riscv64_ghash_desc_ctx {
 	be128 accumulator;
-	u8 buffer[GHASH_BLOCK_SIZE];
-	u32 bytes;
 };
 
 static int riscv64_ghash_setkey(struct crypto_shash *tfm, const u8 *key,
@@ -78,50 +81,24 @@ static int riscv64_ghash_update(struct shash_desc *desc, const u8 *src,
 {
 	const struct riscv64_ghash_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct riscv64_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
-	unsigned int len;
-
-	if (dctx->bytes) {
-		if (dctx->bytes + srclen < GHASH_BLOCK_SIZE) {
-			memcpy(dctx->buffer + dctx->bytes, src, srclen);
-			dctx->bytes += srclen;
-			return 0;
-		}
-		memcpy(dctx->buffer + dctx->bytes, src,
-		       GHASH_BLOCK_SIZE - dctx->bytes);
-		riscv64_ghash_blocks(tctx, dctx, dctx->buffer,
-				     GHASH_BLOCK_SIZE);
-		src += GHASH_BLOCK_SIZE - dctx->bytes;
-		srclen -= GHASH_BLOCK_SIZE - dctx->bytes;
-		dctx->bytes = 0;
-	}
-
-	len = round_down(srclen, GHASH_BLOCK_SIZE);
-	if (len) {
-		riscv64_ghash_blocks(tctx, dctx, src, len);
-		src += len;
-		srclen -= len;
-	}
 
-	if (srclen) {
-		memcpy(dctx->buffer, src, srclen);
-		dctx->bytes = srclen;
-	}
-
-	return 0;
+	riscv64_ghash_blocks(tctx, dctx, src,
+			     round_down(srclen, GHASH_BLOCK_SIZE));
+	return srclen - round_down(srclen, GHASH_BLOCK_SIZE);
 }
 
-static int riscv64_ghash_final(struct shash_desc *desc, u8 *out)
+static int riscv64_ghash_finup(struct shash_desc *desc, const u8 *src,
+			       unsigned int len, u8 *out)
 {
 	const struct riscv64_ghash_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct riscv64_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
-	int i;
 
-	if (dctx->bytes) {
-		for (i = dctx->bytes; i < GHASH_BLOCK_SIZE; i++)
-			dctx->buffer[i] = 0;
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		riscv64_ghash_blocks(tctx, dctx, dctx->buffer,
-				     GHASH_BLOCK_SIZE);
+		memcpy(buf, src, len);
+		riscv64_ghash_blocks(tctx, dctx, buf, GHASH_BLOCK_SIZE);
+		memzero_explicit(buf, sizeof(buf));
 	}
 
 	memcpy(out, &dctx->accumulator, GHASH_DIGEST_SIZE);
@@ -131,7 +108,7 @@ static int riscv64_ghash_final(struct shash_desc *desc, u8 *out)
 static struct shash_alg riscv64_ghash_alg = {
 	.init = riscv64_ghash_init,
 	.update = riscv64_ghash_update,
-	.final = riscv64_ghash_final,
+	.finup = riscv64_ghash_finup,
 	.setkey = riscv64_ghash_setkey,
 	.descsize = sizeof(struct riscv64_ghash_desc_ctx),
 	.digestsize = GHASH_DIGEST_SIZE,
@@ -139,6 +116,7 @@ static struct shash_alg riscv64_ghash_alg = {
 		.cra_blocksize = GHASH_BLOCK_SIZE,
 		.cra_ctxsize = sizeof(struct riscv64_ghash_tfm_ctx),
 		.cra_priority = 300,
+		.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY,
 		.cra_name = "ghash",
 		.cra_driver_name = "ghash-riscv64-zvkg",
 		.cra_module = THIS_MODULE,
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sha256-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/crypto/sha256-riscv64-glue.c
deleted file mode 100644
index 71e051e40a64..000000000000
--- linux-libre-6.15-gnu/arch/riscv/crypto/sha256-riscv64-glue.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SHA-256 and SHA-224 using the RISC-V vector crypto extensions
- *
- * Copyright (C) 2022 VRULL GmbH
- * Author: Heiko Stuebner <heiko.stuebner@vrull.eu>
- *
- * Copyright (C) 2023 SiFive, Inc.
- * Author: Jerry Shih <jerry.shih@sifive.com>
- */
-
-#include <asm/simd.h>
-#include <asm/vector.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha256_base.h>
-#include <linux/linkage.h>
-#include <linux/module.h>
-
-/*
- * Note: the asm function only uses the 'state' field of struct sha256_state.
- * It is assumed to be the first field.
- */
-asmlinkage void sha256_transform_zvknha_or_zvknhb_zvkb(
-	struct sha256_state *state, const u8 *data, int num_blocks);
-
-static int riscv64_sha256_update(struct shash_desc *desc, const u8 *data,
-				 unsigned int len)
-{
-	/*
-	 * Ensure struct sha256_state begins directly with the SHA-256
-	 * 256-bit internal state, as this is what the asm function expects.
-	 */
-	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
-
-	if (crypto_simd_usable()) {
-		kernel_vector_begin();
-		sha256_base_do_update(desc, data, len,
-				      sha256_transform_zvknha_or_zvknhb_zvkb);
-		kernel_vector_end();
-	} else {
-		crypto_sha256_update(desc, data, len);
-	}
-	return 0;
-}
-
-static int riscv64_sha256_finup(struct shash_desc *desc, const u8 *data,
-				unsigned int len, u8 *out)
-{
-	if (crypto_simd_usable()) {
-		kernel_vector_begin();
-		if (len)
-			sha256_base_do_update(
-				desc, data, len,
-				sha256_transform_zvknha_or_zvknhb_zvkb);
-		sha256_base_do_finalize(
-			desc, sha256_transform_zvknha_or_zvknhb_zvkb);
-		kernel_vector_end();
-
-		return sha256_base_finish(desc, out);
-	}
-
-	return crypto_sha256_finup(desc, data, len, out);
-}
-
-static int riscv64_sha256_final(struct shash_desc *desc, u8 *out)
-{
-	return riscv64_sha256_finup(desc, NULL, 0, out);
-}
-
-static int riscv64_sha256_digest(struct shash_desc *desc, const u8 *data,
-				 unsigned int len, u8 *out)
-{
-	return sha256_base_init(desc) ?:
-	       riscv64_sha256_finup(desc, data, len, out);
-}
-
-static struct shash_alg riscv64_sha256_algs[] = {
-	{
-		.init = sha256_base_init,
-		.update = riscv64_sha256_update,
-		.final = riscv64_sha256_final,
-		.finup = riscv64_sha256_finup,
-		.digest = riscv64_sha256_digest,
-		.descsize = sizeof(struct sha256_state),
-		.digestsize = SHA256_DIGEST_SIZE,
-		.base = {
-			.cra_blocksize = SHA256_BLOCK_SIZE,
-			.cra_priority = 300,
-			.cra_name = "sha256",
-			.cra_driver_name = "sha256-riscv64-zvknha_or_zvknhb-zvkb",
-			.cra_module = THIS_MODULE,
-		},
-	}, {
-		.init = sha224_base_init,
-		.update = riscv64_sha256_update,
-		.final = riscv64_sha256_final,
-		.finup = riscv64_sha256_finup,
-		.descsize = sizeof(struct sha256_state),
-		.digestsize = SHA224_DIGEST_SIZE,
-		.base = {
-			.cra_blocksize = SHA224_BLOCK_SIZE,
-			.cra_priority = 300,
-			.cra_name = "sha224",
-			.cra_driver_name = "sha224-riscv64-zvknha_or_zvknhb-zvkb",
-			.cra_module = THIS_MODULE,
-		},
-	},
-};
-
-static int __init riscv64_sha256_mod_init(void)
-{
-	/* Both zvknha and zvknhb provide the SHA-256 instructions. */
-	if ((riscv_isa_extension_available(NULL, ZVKNHA) ||
-	     riscv_isa_extension_available(NULL, ZVKNHB)) &&
-	    riscv_isa_extension_available(NULL, ZVKB) &&
-	    riscv_vector_vlen() >= 128)
-		return crypto_register_shashes(riscv64_sha256_algs,
-					       ARRAY_SIZE(riscv64_sha256_algs));
-
-	return -ENODEV;
-}
-
-static void __exit riscv64_sha256_mod_exit(void)
-{
-	crypto_unregister_shashes(riscv64_sha256_algs,
-				  ARRAY_SIZE(riscv64_sha256_algs));
-}
-
-module_init(riscv64_sha256_mod_init);
-module_exit(riscv64_sha256_mod_exit);
-
-MODULE_DESCRIPTION("SHA-256 (RISC-V accelerated)");
-MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@vrull.eu>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CRYPTO("sha256");
-MODULE_ALIAS_CRYPTO("sha224");
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sha512-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/crypto/sha512-riscv64-glue.c
index 43b56a08aeb5..4634fca78ae2 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/sha512-riscv64-glue.c
+++ linux-libre-6.16-gnu/arch/riscv/crypto/sha512-riscv64-glue.c
@@ -14,7 +14,7 @@
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
 #include <crypto/sha512_base.h>
-#include <linux/linkage.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 /*
@@ -24,8 +24,8 @@
 asmlinkage void sha512_transform_zvknhb_zvkb(
 	struct sha512_state *state, const u8 *data, int num_blocks);
 
-static int riscv64_sha512_update(struct shash_desc *desc, const u8 *data,
-				 unsigned int len)
+static void sha512_block(struct sha512_state *state, const u8 *data,
+			 int num_blocks)
 {
 	/*
 	 * Ensure struct sha512_state begins directly with the SHA-512
@@ -35,35 +35,24 @@ static int riscv64_sha512_update(struct shash_desc *desc, const u8 *data,
 
 	if (crypto_simd_usable()) {
 		kernel_vector_begin();
-		sha512_base_do_update(desc, data, len,
-				      sha512_transform_zvknhb_zvkb);
+		sha512_transform_zvknhb_zvkb(state, data, num_blocks);
 		kernel_vector_end();
 	} else {
-		crypto_sha512_update(desc, data, len);
+		sha512_generic_block_fn(state, data, num_blocks);
 	}
-	return 0;
 }
 
-static int riscv64_sha512_finup(struct shash_desc *desc, const u8 *data,
-				unsigned int len, u8 *out)
+static int riscv64_sha512_update(struct shash_desc *desc, const u8 *data,
+				 unsigned int len)
 {
-	if (crypto_simd_usable()) {
-		kernel_vector_begin();
-		if (len)
-			sha512_base_do_update(desc, data, len,
-					      sha512_transform_zvknhb_zvkb);
-		sha512_base_do_finalize(desc, sha512_transform_zvknhb_zvkb);
-		kernel_vector_end();
-
-		return sha512_base_finish(desc, out);
-	}
-
-	return crypto_sha512_finup(desc, data, len, out);
+	return sha512_base_do_update_blocks(desc, data, len, sha512_block);
 }
 
-static int riscv64_sha512_final(struct shash_desc *desc, u8 *out)
+static int riscv64_sha512_finup(struct shash_desc *desc, const u8 *data,
+				unsigned int len, u8 *out)
 {
-	return riscv64_sha512_finup(desc, NULL, 0, out);
+	sha512_base_do_finup(desc, data, len, sha512_block);
+	return sha512_base_finish(desc, out);
 }
 
 static int riscv64_sha512_digest(struct shash_desc *desc, const u8 *data,
@@ -77,14 +66,15 @@ static struct shash_alg riscv64_sha512_algs[] = {
 	{
 		.init = sha512_base_init,
 		.update = riscv64_sha512_update,
-		.final = riscv64_sha512_final,
 		.finup = riscv64_sha512_finup,
 		.digest = riscv64_sha512_digest,
-		.descsize = sizeof(struct sha512_state),
+		.descsize = SHA512_STATE_SIZE,
 		.digestsize = SHA512_DIGEST_SIZE,
 		.base = {
 			.cra_blocksize = SHA512_BLOCK_SIZE,
 			.cra_priority = 300,
+			.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				     CRYPTO_AHASH_ALG_FINUP_MAX,
 			.cra_name = "sha512",
 			.cra_driver_name = "sha512-riscv64-zvknhb-zvkb",
 			.cra_module = THIS_MODULE,
@@ -92,13 +82,14 @@ static struct shash_alg riscv64_sha512_algs[] = {
 	}, {
 		.init = sha384_base_init,
 		.update = riscv64_sha512_update,
-		.final = riscv64_sha512_final,
 		.finup = riscv64_sha512_finup,
-		.descsize = sizeof(struct sha512_state),
+		.descsize = SHA512_STATE_SIZE,
 		.digestsize = SHA384_DIGEST_SIZE,
 		.base = {
 			.cra_blocksize = SHA384_BLOCK_SIZE,
 			.cra_priority = 300,
+			.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				     CRYPTO_AHASH_ALG_FINUP_MAX,
 			.cra_name = "sha384",
 			.cra_driver_name = "sha384-riscv64-zvknhb-zvkb",
 			.cra_module = THIS_MODULE,
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sha512-riscv64-zvknhb-zvkb.S linux-libre-6.16-gnu/arch/riscv/crypto/sha512-riscv64-zvknhb-zvkb.S
index 3a9ae210f915..89f4a10d12dd 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/sha512-riscv64-zvknhb-zvkb.S
+++ linux-libre-6.16-gnu/arch/riscv/crypto/sha512-riscv64-zvknhb-zvkb.S
@@ -43,7 +43,7 @@
 // - RISC-V Vector SHA-2 Secure Hash extension ('Zvknhb')
 // - RISC-V Vector Cryptography Bit-manipulation extension ('Zvkb')
 
-#include <linux/cfi_types.h>
+#include <linux/linkage.h>
 
 .text
 .option arch, +zvknhb, +zvkb
@@ -95,7 +95,7 @@
 
 // void sha512_transform_zvknhb_zvkb(u64 state[8], const u8 *data,
 //				     int num_blocks);
-SYM_TYPED_FUNC_START(sha512_transform_zvknhb_zvkb)
+SYM_FUNC_START(sha512_transform_zvknhb_zvkb)
 
 	// Setup mask for the vmerge to replace the first word (idx==0) in
 	// message scheduling.  There are 4 words, so an 8-bit mask suffices.
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sm3-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/crypto/sm3-riscv64-glue.c
index e1737a970c7c..abdfe4a63a27 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/sm3-riscv64-glue.c
+++ linux-libre-6.16-gnu/arch/riscv/crypto/sm3-riscv64-glue.c
@@ -13,8 +13,9 @@
 #include <asm/vector.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
+#include <crypto/sm3.h>
 #include <crypto/sm3_base.h>
-#include <linux/linkage.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 /*
@@ -24,8 +25,8 @@
 asmlinkage void sm3_transform_zvksh_zvkb(
 	struct sm3_state *state, const u8 *data, int num_blocks);
 
-static int riscv64_sm3_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
+static void sm3_block(struct sm3_state *state, const u8 *data,
+		      int num_blocks)
 {
 	/*
 	 * Ensure struct sm3_state begins directly with the SM3
@@ -35,52 +36,36 @@ static int riscv64_sm3_update(struct shash_desc *desc, const u8 *data,
 
 	if (crypto_simd_usable()) {
 		kernel_vector_begin();
-		sm3_base_do_update(desc, data, len, sm3_transform_zvksh_zvkb);
+		sm3_transform_zvksh_zvkb(state, data, num_blocks);
 		kernel_vector_end();
 	} else {
-		sm3_update(shash_desc_ctx(desc), data, len);
+		sm3_block_generic(state, data, num_blocks);
 	}
-	return 0;
 }
 
-static int riscv64_sm3_finup(struct shash_desc *desc, const u8 *data,
-			     unsigned int len, u8 *out)
+static int riscv64_sm3_update(struct shash_desc *desc, const u8 *data,
+			      unsigned int len)
 {
-	struct sm3_state *ctx;
-
-	if (crypto_simd_usable()) {
-		kernel_vector_begin();
-		if (len)
-			sm3_base_do_update(desc, data, len,
-					   sm3_transform_zvksh_zvkb);
-		sm3_base_do_finalize(desc, sm3_transform_zvksh_zvkb);
-		kernel_vector_end();
-
-		return sm3_base_finish(desc, out);
-	}
-
-	ctx = shash_desc_ctx(desc);
-	if (len)
-		sm3_update(ctx, data, len);
-	sm3_final(ctx, out);
-
-	return 0;
+	return sm3_base_do_update_blocks(desc, data, len, sm3_block);
 }
 
-static int riscv64_sm3_final(struct shash_desc *desc, u8 *out)
+static int riscv64_sm3_finup(struct shash_desc *desc, const u8 *data,
+			     unsigned int len, u8 *out)
 {
-	return riscv64_sm3_finup(desc, NULL, 0, out);
+	sm3_base_do_finup(desc, data, len, sm3_block);
+	return sm3_base_finish(desc, out);
 }
 
 static struct shash_alg riscv64_sm3_alg = {
 	.init = sm3_base_init,
 	.update = riscv64_sm3_update,
-	.final = riscv64_sm3_final,
 	.finup = riscv64_sm3_finup,
-	.descsize = sizeof(struct sm3_state),
+	.descsize = SM3_STATE_SIZE,
 	.digestsize = SM3_DIGEST_SIZE,
 	.base = {
 		.cra_blocksize = SM3_BLOCK_SIZE,
+		.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY |
+			     CRYPTO_AHASH_ALG_FINUP_MAX,
 		.cra_priority = 300,
 		.cra_name = "sm3",
 		.cra_driver_name = "sm3-riscv64-zvksh-zvkb",
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sm3-riscv64-zvksh-zvkb.S linux-libre-6.16-gnu/arch/riscv/crypto/sm3-riscv64-zvksh-zvkb.S
index a2b65d961c04..4fe754846f65 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/sm3-riscv64-zvksh-zvkb.S
+++ linux-libre-6.16-gnu/arch/riscv/crypto/sm3-riscv64-zvksh-zvkb.S
@@ -43,7 +43,7 @@
 // - RISC-V Vector SM3 Secure Hash extension ('Zvksh')
 // - RISC-V Vector Cryptography Bit-manipulation extension ('Zvkb')
 
-#include <linux/cfi_types.h>
+#include <linux/linkage.h>
 
 .text
 .option arch, +zvksh, +zvkb
@@ -81,7 +81,7 @@
 .endm
 
 // void sm3_transform_zvksh_zvkb(u32 state[8], const u8 *data, int num_blocks);
-SYM_TYPED_FUNC_START(sm3_transform_zvksh_zvkb)
+SYM_FUNC_START(sm3_transform_zvksh_zvkb)
 
 	// Load the state and endian-swap each 32-bit word.
 	vsetivli	zero, 8, e32, m2, ta, ma
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/asm-prototypes.h linux-libre-6.16-gnu/arch/riscv/include/asm/asm-prototypes.h
index cd627ec289f1..a9988bf21ec8 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/asm-prototypes.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/asm-prototypes.h
@@ -12,7 +12,7 @@ long long __ashlti3(long long a, int b);
 #ifdef CONFIG_RISCV_ISA_V
 
 #ifdef CONFIG_MMU
-asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n);
+asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n, bool enable_sum);
 #endif /* CONFIG_MMU  */
 
 void xor_regs_2_(unsigned long bytes, unsigned long *__restrict p1,
@@ -52,6 +52,8 @@ DECLARE_DO_ERROR_INFO(do_trap_ecall_s);
 DECLARE_DO_ERROR_INFO(do_trap_ecall_m);
 DECLARE_DO_ERROR_INFO(do_trap_break);
 
+asmlinkage void ret_from_fork_kernel(void *fn_arg, int (*fn)(void *), struct pt_regs *regs);
+asmlinkage void ret_from_fork_user(struct pt_regs *regs);
 asmlinkage void handle_bad_stack(struct pt_regs *regs);
 asmlinkage void do_page_fault(struct pt_regs *regs);
 asmlinkage void do_irq(struct pt_regs *regs);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/barrier.h linux-libre-6.16-gnu/arch/riscv/include/asm/barrier.h
index e1d9bf1deca6..b8c5726d86ac 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/barrier.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/barrier.h
@@ -14,11 +14,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/fence.h>
 
-#define nop()		__asm__ __volatile__ ("nop")
-#define __nops(n)	".rept	" #n "\nnop\n.endr\n"
-#define nops(n)		__asm__ __volatile__ (__nops(n))
-
-
 /* These barriers need to enforce ordering on both devices or memory. */
 #define __mb()		RISCV_FENCE(iorw, iorw)
 #define __rmb()		RISCV_FENCE(ir, ir)
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/cacheflush.h linux-libre-6.16-gnu/arch/riscv/include/asm/cacheflush.h
index b59ffeb668d6..6086b38d5427 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/cacheflush.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/cacheflush.h
@@ -85,6 +85,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 
 extern unsigned int riscv_cbom_block_size;
 extern unsigned int riscv_cboz_block_size;
+extern unsigned int riscv_cbop_block_size;
 void riscv_init_cbo_blocksizes(void);
 
 #ifdef CONFIG_RISCV_DMA_NONCOHERENT
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/cmpxchg.h linux-libre-6.16-gnu/arch/riscv/include/asm/cmpxchg.h
index 2ec119eb147b..0b749e710216 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/cmpxchg.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/cmpxchg.h
@@ -13,6 +13,7 @@
 #include <asm/hwcap.h>
 #include <asm/insn-def.h>
 #include <asm/cpufeature-macros.h>
+#include <asm/processor.h>
 
 #define __arch_xchg_masked(sc_sfx, swap_sfx, prepend, sc_append,		\
 			   swap_append, r, p, n)				\
@@ -37,6 +38,7 @@
 										\
 		__asm__ __volatile__ (						\
 		       prepend							\
+		       PREFETCHW_ASM(%5)					\
 		       "0:	lr.w %0, %2\n"					\
 		       "	and  %1, %0, %z4\n"				\
 		       "	or   %1, %1, %z3\n"				\
@@ -44,7 +46,7 @@
 		       "	bnez %1, 0b\n"					\
 		       sc_append						\
 		       : "=&r" (__retx), "=&r" (__rc), "+A" (*(__ptr32b))	\
-		       : "rJ" (__newx), "rJ" (~__mask)				\
+		       : "rJ" (__newx), "rJ" (~__mask), "rJ" (__ptr32b)		\
 		       : "memory");						\
 										\
 		r = (__typeof__(*(p)))((__retx & __mask) >> __s);		\
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/cpufeature.h linux-libre-6.16-gnu/arch/riscv/include/asm/cpufeature.h
index f56b409361fb..fbd0e4306c93 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/cpufeature.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/cpufeature.h
@@ -67,11 +67,11 @@ void __init riscv_user_isa_enable(void);
 	_RISCV_ISA_EXT_DATA(_name, _id, _sub_exts, ARRAY_SIZE(_sub_exts), _validate)
 
 bool __init check_unaligned_access_emulated_all_cpus(void);
+void unaligned_access_init(void);
+int cpu_online_unaligned_access_init(unsigned int cpu);
 #if defined(CONFIG_RISCV_SCALAR_MISALIGNED)
-void check_unaligned_access_emulated(struct work_struct *work __always_unused);
 void unaligned_emulation_finish(void);
 bool unaligned_ctl_available(void);
-DECLARE_PER_CPU(long, misaligned_access_speed);
 #else
 static inline bool unaligned_ctl_available(void)
 {
@@ -79,6 +79,16 @@ static inline bool unaligned_ctl_available(void)
 }
 #endif
 
+#if defined(CONFIG_RISCV_MISALIGNED)
+DECLARE_PER_CPU(long, misaligned_access_speed);
+bool misaligned_traps_can_delegate(void);
+#else
+static inline bool misaligned_traps_can_delegate(void)
+{
+	return false;
+}
+#endif
+
 bool __init check_vector_unaligned_access_emulated_all_cpus(void);
 #if defined(CONFIG_RISCV_VECTOR_MISALIGNED)
 void check_vector_unaligned_access_emulated(struct work_struct *work __always_unused);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/ftrace.h linux-libre-6.16-gnu/arch/riscv/include/asm/ftrace.h
index d627f63ee289..22ebea3c2b26 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/ftrace.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/ftrace.h
@@ -20,10 +20,9 @@ extern void *return_address(unsigned int level);
 #define ftrace_return_address(n) return_address(n)
 
 void _mcount(void);
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	return addr;
-}
+unsigned long ftrace_call_adjust(unsigned long addr);
+unsigned long arch_ftrace_get_symaddr(unsigned long fentry_ip);
+#define ftrace_get_symaddr(fentry_ip) arch_ftrace_get_symaddr(fentry_ip)
 
 /*
  * Let's do like x86/arm64 and ignore the compat syscalls.
@@ -57,12 +56,21 @@ struct dyn_arch_ftrace {
  * 2) jalr: setting low-12 offset to ra, jump to ra, and set ra to
  *          return address (original pc + 4)
  *
+ * The first 2 instructions for each tracable function is compiled to 2 nop
+ * instructions. Then, the kernel initializes the first instruction to auipc at
+ * boot time (<ftrace disable>). The second instruction is patched to jalr to
+ * start the trace.
+ *
+ *<Image>:
+ * 0: nop
+ * 4: nop
+ *
  *<ftrace enable>:
- * 0: auipc  t0/ra, 0x?
- * 4: jalr   t0/ra, ?(t0/ra)
+ * 0: auipc  t0, 0x?
+ * 4: jalr   t0, ?(t0)
  *
  *<ftrace disable>:
- * 0: nop
+ * 0: auipc  t0, 0x?
  * 4: nop
  *
  * Dynamic ftrace generates probes to call sites, so we must deal with
@@ -75,10 +83,9 @@ struct dyn_arch_ftrace {
 #define AUIPC_OFFSET_MASK	(0xfffff000)
 #define AUIPC_PAD		(0x00001000)
 #define JALR_SHIFT		20
-#define JALR_RA			(0x000080e7)
-#define AUIPC_RA		(0x00000097)
 #define JALR_T0			(0x000282e7)
 #define AUIPC_T0		(0x00000297)
+#define JALR_RANGE		(JALR_SIGN_MASK - 1)
 
 #define to_jalr_t0(offset)						\
 	(((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_T0)
@@ -96,26 +103,14 @@ do {									\
 	call[1] = to_jalr_t0(offset);					\
 } while (0)
 
-#define to_jalr_ra(offset)						\
-	(((offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_RA)
-
-#define to_auipc_ra(offset)						\
-	((offset & JALR_SIGN_MASK) ?					\
-	(((offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_RA) :	\
-	((offset & AUIPC_OFFSET_MASK) | AUIPC_RA))
-
-#define make_call_ra(caller, callee, call)				\
-do {									\
-	unsigned int offset =						\
-		(unsigned long) (callee) - (unsigned long) (caller);	\
-	call[0] = to_auipc_ra(offset);					\
-	call[1] = to_jalr_ra(offset);					\
-} while (0)
-
 /*
- * Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here.
+ * Only the jalr insn in the auipc+jalr is patched, so we make it 4
+ * bytes here.
  */
-#define MCOUNT_INSN_SIZE 8
+#define MCOUNT_INSN_SIZE	4
+#define MCOUNT_AUIPC_SIZE	4
+#define MCOUNT_JALR_SIZE	4
+#define MCOUNT_NOP4_SIZE	4
 
 #ifndef __ASSEMBLY__
 struct dyn_ftrace;
@@ -135,6 +130,9 @@ struct __arch_ftrace_regs {
 	unsigned long sp;
 	unsigned long s0;
 	unsigned long t1;
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	unsigned long direct_tramp;
+#endif
 	union {
 		unsigned long args[8];
 		struct {
@@ -146,6 +144,13 @@ struct __arch_ftrace_regs {
 			unsigned long a5;
 			unsigned long a6;
 			unsigned long a7;
+#ifdef CONFIG_CC_IS_CLANG
+			unsigned long t2;
+			unsigned long t3;
+			unsigned long t4;
+			unsigned long t5;
+			unsigned long t6;
+#endif
 		};
 	};
 };
@@ -221,10 +226,13 @@ void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs);
 #define ftrace_graph_func ftrace_graph_func
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs, unsigned long addr)
 {
 	arch_ftrace_regs(fregs)->t1 = addr;
 }
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 
 #endif /* __ASSEMBLY__ */
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/hwcap.h linux-libre-6.16-gnu/arch/riscv/include/asm/hwcap.h
index e3cbf203cdde..affd63e11b0a 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/hwcap.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/hwcap.h
@@ -105,6 +105,7 @@
 #define RISCV_ISA_EXT_ZVFBFWMA		96
 #define RISCV_ISA_EXT_ZAAMO		97
 #define RISCV_ISA_EXT_ZALRSC		98
+#define RISCV_ISA_EXT_ZICBOP		99
 
 #define RISCV_ISA_EXT_XLINUXENVCFG	127
 
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/hwprobe.h linux-libre-6.16-gnu/arch/riscv/include/asm/hwprobe.h
index 1f690fea0e03..7fe0a379474a 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/hwprobe.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/hwprobe.h
@@ -8,7 +8,7 @@
 
 #include <uapi/asm/hwprobe.h>
 
-#define RISCV_HWPROBE_MAX_KEY 12
+#define RISCV_HWPROBE_MAX_KEY 13
 
 static inline bool riscv_hwprobe_key_is_valid(__s64 key)
 {
@@ -22,6 +22,7 @@ static inline bool hwprobe_key_is_bitmask(__s64 key)
 	case RISCV_HWPROBE_KEY_IMA_EXT_0:
 	case RISCV_HWPROBE_KEY_CPUPERF_0:
 	case RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0:
+	case RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0:
 		return true;
 	}
 
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/image.h linux-libre-6.16-gnu/arch/riscv/include/asm/image.h
index e0b319af3681..8927a6ea1127 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/image.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/image.h
@@ -30,6 +30,8 @@
 			      RISCV_HEADER_VERSION_MINOR)
 
 #ifndef __ASSEMBLY__
+#define riscv_image_flag_field(flags, field)\
+			       (((flags) >> field##_SHIFT) & field##_MASK)
 /**
  * struct riscv_image_header - riscv kernel image header
  * @code0:		Executable code
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/insn-def.h linux-libre-6.16-gnu/arch/riscv/include/asm/insn-def.h
index 71060a2f838e..d5adbaec1d01 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/insn-def.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/insn-def.h
@@ -18,6 +18,13 @@
 #define INSN_I_RD_SHIFT			 7
 #define INSN_I_OPCODE_SHIFT		 0
 
+#define INSN_S_SIMM7_SHIFT		25
+#define INSN_S_RS2_SHIFT		20
+#define INSN_S_RS1_SHIFT		15
+#define INSN_S_FUNC3_SHIFT		12
+#define INSN_S_SIMM5_SHIFT		 7
+#define INSN_S_OPCODE_SHIFT		 0
+
 #ifdef __ASSEMBLY__
 
 #ifdef CONFIG_AS_HAS_INSN
@@ -30,6 +37,10 @@
 	.insn	i \opcode, \func3, \rd, \rs1, \simm12
 	.endm
 
+	.macro insn_s, opcode, func3, rs2, simm12, rs1
+	.insn	s \opcode, \func3, \rs2, \simm12(\rs1)
+	.endm
+
 #else
 
 #include <asm/gpr-num.h>
@@ -51,10 +62,20 @@
 		 (\simm12 << INSN_I_SIMM12_SHIFT))
 	.endm
 
+	.macro insn_s, opcode, func3, rs2, simm12, rs1
+	.4byte	((\opcode << INSN_S_OPCODE_SHIFT) |		\
+		 (\func3 << INSN_S_FUNC3_SHIFT) |		\
+		 (.L__gpr_num_\rs2 << INSN_S_RS2_SHIFT) |	\
+		 (.L__gpr_num_\rs1 << INSN_S_RS1_SHIFT) |	\
+		 ((\simm12 & 0x1f) << INSN_S_SIMM5_SHIFT) |	\
+		 (((\simm12 >> 5) & 0x7f) << INSN_S_SIMM7_SHIFT))
+	.endm
+
 #endif
 
 #define __INSN_R(...)	insn_r __VA_ARGS__
 #define __INSN_I(...)	insn_i __VA_ARGS__
+#define __INSN_S(...)	insn_s __VA_ARGS__
 
 #else /* ! __ASSEMBLY__ */
 
@@ -66,6 +87,9 @@
 #define __INSN_I(opcode, func3, rd, rs1, simm12)	\
 	".insn	i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n"
 
+#define __INSN_S(opcode, func3, rs2, simm12, rs1)	\
+	".insn	s " opcode ", " func3 ", " rs2 ", " simm12 "(" rs1 ")\n"
+
 #else
 
 #include <linux/stringify.h>
@@ -92,12 +116,26 @@
 "		 (\\simm12 << " __stringify(INSN_I_SIMM12_SHIFT) "))\n"	\
 "	.endm\n"
 
+#define DEFINE_INSN_S							\
+	__DEFINE_ASM_GPR_NUMS						\
+"	.macro insn_s, opcode, func3, rs2, simm12, rs1\n"		\
+"	.4byte	((\\opcode << " __stringify(INSN_S_OPCODE_SHIFT) ") |"	\
+"		 (\\func3 << " __stringify(INSN_S_FUNC3_SHIFT) ") |"	\
+"		 (.L__gpr_num_\\rs2 << " __stringify(INSN_S_RS2_SHIFT) ") |" \
+"		 (.L__gpr_num_\\rs1 << " __stringify(INSN_S_RS1_SHIFT) ") |" \
+"		 ((\\simm12 & 0x1f) << " __stringify(INSN_S_SIMM5_SHIFT) ") |" \
+"		 (((\\simm12 >> 5) & 0x7f) << " __stringify(INSN_S_SIMM7_SHIFT) "))\n" \
+"	.endm\n"
+
 #define UNDEFINE_INSN_R							\
 "	.purgem insn_r\n"
 
 #define UNDEFINE_INSN_I							\
 "	.purgem insn_i\n"
 
+#define UNDEFINE_INSN_S							\
+"	.purgem insn_s\n"
+
 #define __INSN_R(opcode, func3, func7, rd, rs1, rs2)			\
 	DEFINE_INSN_R							\
 	"insn_r " opcode ", " func3 ", " func7 ", " rd ", " rs1 ", " rs2 "\n" \
@@ -108,6 +146,11 @@
 	"insn_i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n" \
 	UNDEFINE_INSN_I
 
+#define __INSN_S(opcode, func3, rs2, simm12, rs1)			\
+	DEFINE_INSN_S							\
+	"insn_s " opcode ", " func3 ", " rs2 ", " simm12 ", " rs1 "\n"	\
+	UNDEFINE_INSN_S
+
 #endif
 
 #endif /* ! __ASSEMBLY__ */
@@ -120,6 +163,10 @@
 	__INSN_I(RV_##opcode, RV_##func3, RV_##rd,		\
 		 RV_##rs1, RV_##simm12)
 
+#define INSN_S(opcode, func3, rs2, simm12, rs1)			\
+	__INSN_S(RV_##opcode, RV_##func3, RV_##rs2,		\
+		 RV_##simm12, RV_##rs1)
+
 #define RV_OPCODE(v)		__ASM_STR(v)
 #define RV_FUNC3(v)		__ASM_STR(v)
 #define RV_FUNC7(v)		__ASM_STR(v)
@@ -133,6 +180,7 @@
 #define RV___RS2(v)		__RV_REG(v)
 
 #define RV_OPCODE_MISC_MEM	RV_OPCODE(15)
+#define RV_OPCODE_OP_IMM	RV_OPCODE(19)
 #define RV_OPCODE_SYSTEM	RV_OPCODE(115)
 
 #define HFENCE_VVMA(vaddr, asid)				\
@@ -196,6 +244,18 @@
 	INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0),		\
 	       RS1(base), SIMM12(4))
 
+#define PREFETCH_I(base, offset)				\
+	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(0),		\
+	       SIMM12((offset) & 0xfe0), RS1(base))
+
+#define PREFETCH_R(base, offset)				\
+	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(1),		\
+	       SIMM12((offset) & 0xfe0), RS1(base))
+
+#define PREFETCH_W(base, offset)				\
+	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(3),		\
+	       SIMM12((offset) & 0xfe0), RS1(base))
+
 #define RISCV_PAUSE	".4byte 0x100000f"
 #define ZAWRS_WRS_NTO	".4byte 0x00d00073"
 #define ZAWRS_WRS_STO	".4byte 0x01d00073"
@@ -203,4 +263,10 @@
 
 #define RISCV_INSN_NOP4	_AC(0x00000013, U)
 
+#ifndef __ASSEMBLY__
+#define nop()           __asm__ __volatile__ ("nop")
+#define __nops(n)       ".rept  " #n "\nnop\n.endr\n"
+#define nops(n)         __asm__ __volatile__ (__nops(n))
+#endif
+
 #endif /* __ASM_INSN_DEF_H */
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/kexec.h linux-libre-6.16-gnu/arch/riscv/include/asm/kexec.h
index 2b56769cb530..b9ee8346cc8c 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/kexec.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/kexec.h
@@ -56,6 +56,7 @@ extern riscv_kexec_method riscv_kexec_norelocate;
 
 #ifdef CONFIG_KEXEC_FILE
 extern const struct kexec_file_ops elf_kexec_ops;
+extern const struct kexec_file_ops image_kexec_ops;
 
 struct purgatory_info;
 int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
@@ -67,6 +68,11 @@ int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
 struct kimage;
 int arch_kimage_file_post_load_cleanup(struct kimage *image);
 #define arch_kimage_file_post_load_cleanup arch_kimage_file_post_load_cleanup
+
+int load_extra_segments(struct kimage *image, unsigned long kernel_start,
+			unsigned long kernel_len, char *initrd,
+			unsigned long initrd_len, char *cmdline,
+			unsigned long cmdline_len);
 #endif
 
 #endif
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_aia.h linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_aia.h
index 1f37b600ca47..5acce285e56e 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_aia.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_aia.h
@@ -63,9 +63,6 @@ struct kvm_vcpu_aia {
 	/* CPU AIA CSR context of Guest VCPU */
 	struct kvm_vcpu_aia_csr guest_csr;
 
-	/* CPU AIA CSR context upon Guest VCPU reset */
-	struct kvm_vcpu_aia_csr guest_reset_csr;
-
 	/* Guest physical address of IMSIC for this VCPU */
 	gpa_t		imsic_addr;
 
@@ -90,6 +87,9 @@ DECLARE_STATIC_KEY_FALSE(kvm_riscv_aia_available);
 
 extern struct kvm_device_ops kvm_riscv_aia_device_ops;
 
+bool kvm_riscv_vcpu_aia_imsic_has_interrupt(struct kvm_vcpu *vcpu);
+void kvm_riscv_vcpu_aia_imsic_load(struct kvm_vcpu *vcpu, int cpu);
+void kvm_riscv_vcpu_aia_imsic_put(struct kvm_vcpu *vcpu);
 void kvm_riscv_vcpu_aia_imsic_release(struct kvm_vcpu *vcpu);
 int kvm_riscv_vcpu_aia_imsic_update(struct kvm_vcpu *vcpu);
 
@@ -164,7 +164,6 @@ void kvm_riscv_aia_destroy_vm(struct kvm *kvm);
 int kvm_riscv_aia_alloc_hgei(int cpu, struct kvm_vcpu *owner,
 			     void __iomem **hgei_va, phys_addr_t *hgei_pa);
 void kvm_riscv_aia_free_hgei(int cpu, int hgei);
-void kvm_riscv_aia_wakeon_hgei(struct kvm_vcpu *owner, bool enable);
 
 void kvm_riscv_aia_enable(void);
 void kvm_riscv_aia_disable(void);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_host.h linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_host.h
index 0e9c2fab6378..bcbf8b1ec115 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_host.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_host.h
@@ -119,6 +119,9 @@ struct kvm_arch {
 
 	/* AIA Guest/VM context */
 	struct kvm_aia aia;
+
+	/* KVM_CAP_RISCV_MP_STATE_RESET */
+	bool mp_state_reset;
 };
 
 struct kvm_cpu_trap {
@@ -193,6 +196,12 @@ struct kvm_vcpu_smstateen_csr {
 	unsigned long sstateen0;
 };
 
+struct kvm_vcpu_reset_state {
+	spinlock_t lock;
+	unsigned long pc;
+	unsigned long a1;
+};
+
 struct kvm_vcpu_arch {
 	/* VCPU ran at least once */
 	bool ran_atleast_once;
@@ -227,12 +236,8 @@ struct kvm_vcpu_arch {
 	/* CPU Smstateen CSR context of Guest VCPU */
 	struct kvm_vcpu_smstateen_csr smstateen_csr;
 
-	/* CPU context upon Guest VCPU reset */
-	struct kvm_cpu_context guest_reset_context;
-	spinlock_t reset_cntx_lock;
-
-	/* CPU CSR context upon Guest VCPU reset */
-	struct kvm_vcpu_csr guest_reset_csr;
+	/* CPU reset state of Guest VCPU */
+	struct kvm_vcpu_reset_state reset_state;
 
 	/*
 	 * VCPU interrupts
@@ -301,6 +306,9 @@ static inline bool kvm_arch_pmi_in_guest(struct kvm_vcpu *vcpu)
 	return IS_ENABLED(CONFIG_GUEST_PERF_EVENTS) && !!vcpu;
 }
 
+static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
+
 #define KVM_RISCV_GSTAGE_TLB_MIN_ORDER		12
 
 void kvm_riscv_local_hfence_gvma_vmid_gpa(unsigned long vmid,
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
index 4ed6203cdd30..439ab2b3534f 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_vcpu_sbi.h
@@ -55,6 +55,9 @@ void kvm_riscv_vcpu_sbi_forward(struct kvm_vcpu *vcpu, struct kvm_run *run);
 void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
 				     struct kvm_run *run,
 				     u32 type, u64 flags);
+void kvm_riscv_vcpu_sbi_request_reset(struct kvm_vcpu *vcpu,
+				      unsigned long pc, unsigned long a1);
+void kvm_riscv_vcpu_sbi_load_reset_state(struct kvm_vcpu *vcpu);
 int kvm_riscv_vcpu_sbi_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_riscv_vcpu_set_reg_sbi_ext(struct kvm_vcpu *vcpu,
 				   const struct kvm_one_reg *reg);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_vcpu_vector.h linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_vcpu_vector.h
index 27f5bccdd8b0..57a798a4cb0d 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/kvm_vcpu_vector.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/kvm_vcpu_vector.h
@@ -33,8 +33,7 @@ void kvm_riscv_vcpu_guest_vector_restore(struct kvm_cpu_context *cntx,
 					 unsigned long *isa);
 void kvm_riscv_vcpu_host_vector_save(struct kvm_cpu_context *cntx);
 void kvm_riscv_vcpu_host_vector_restore(struct kvm_cpu_context *cntx);
-int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu,
-					struct kvm_cpu_context *cntx);
+int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu);
 void kvm_riscv_vcpu_free_vector_context(struct kvm_vcpu *vcpu);
 #else
 
@@ -62,8 +61,7 @@ static inline void kvm_riscv_vcpu_host_vector_restore(struct kvm_cpu_context *cn
 {
 }
 
-static inline int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu,
-						      struct kvm_cpu_context *cntx)
+static inline int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu)
 {
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/pgtable-64.h linux-libre-6.16-gnu/arch/riscv/include/asm/pgtable-64.h
index 0897dd99ab8d..7de05db7d3bd 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/pgtable-64.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/pgtable-64.h
@@ -184,7 +184,7 @@ static inline int pud_none(pud_t pud)
 
 static inline int pud_bad(pud_t pud)
 {
-	return !pud_present(pud);
+	return !pud_present(pud) || (pud_val(pud) & _PAGE_LEAF);
 }
 
 #define pud_leaf	pud_leaf
@@ -262,8 +262,6 @@ static inline unsigned long _pmd_pfn(pmd_t pmd)
 	return __page_val_to_pfn(pmd_val(pmd));
 }
 
-#define mk_pmd(page, prot)    pfn_pmd(page_to_pfn(page), prot)
-
 #define pmd_ERROR(e) \
 	pr_err("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
 
@@ -401,6 +399,7 @@ p4d_t *p4d_offset(pgd_t *pgd, unsigned long address);
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 static inline int pte_devmap(pte_t pte);
 static inline pte_t pmd_pte(pmd_t pmd);
+static inline pte_t pud_pte(pud_t pud);
 
 static inline int pmd_devmap(pmd_t pmd)
 {
@@ -409,7 +408,7 @@ static inline int pmd_devmap(pmd_t pmd)
 
 static inline int pud_devmap(pud_t pud)
 {
-	return 0;
+	return pte_devmap(pud_pte(pud));
 }
 
 static inline int pgd_devmap(pgd_t pgd)
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/pgtable.h linux-libre-6.16-gnu/arch/riscv/include/asm/pgtable.h
index 428e48e5f57d..5bd5aae60d53 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/pgtable.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/pgtable.h
@@ -343,8 +343,6 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 	return __pte((pfn << _PAGE_PFN_SHIFT) | prot_val);
 }
 
-#define mk_pte(page, prot)       pfn_pte(page_to_pfn(page), prot)
-
 #define pte_pgprot pte_pgprot
 static inline pgprot_t pte_pgprot(pte_t pte)
 {
@@ -902,6 +900,103 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
 #define pmdp_collapse_flush pmdp_collapse_flush
 extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
 				 unsigned long address, pmd_t *pmdp);
+
+static inline pud_t pud_wrprotect(pud_t pud)
+{
+	return pte_pud(pte_wrprotect(pud_pte(pud)));
+}
+
+static inline int pud_trans_huge(pud_t pud)
+{
+	return pud_leaf(pud);
+}
+
+static inline int pud_dirty(pud_t pud)
+{
+	return pte_dirty(pud_pte(pud));
+}
+
+static inline pud_t pud_mkyoung(pud_t pud)
+{
+	return pte_pud(pte_mkyoung(pud_pte(pud)));
+}
+
+static inline pud_t pud_mkold(pud_t pud)
+{
+	return pte_pud(pte_mkold(pud_pte(pud)));
+}
+
+static inline pud_t pud_mkdirty(pud_t pud)
+{
+	return pte_pud(pte_mkdirty(pud_pte(pud)));
+}
+
+static inline pud_t pud_mkclean(pud_t pud)
+{
+	return pte_pud(pte_mkclean(pud_pte(pud)));
+}
+
+static inline pud_t pud_mkwrite(pud_t pud)
+{
+	return pte_pud(pte_mkwrite_novma(pud_pte(pud)));
+}
+
+static inline pud_t pud_mkhuge(pud_t pud)
+{
+	return pud;
+}
+
+static inline pud_t pud_mkdevmap(pud_t pud)
+{
+	return pte_pud(pte_mkdevmap(pud_pte(pud)));
+}
+
+static inline int pudp_set_access_flags(struct vm_area_struct *vma,
+					unsigned long address, pud_t *pudp,
+					pud_t entry, int dirty)
+{
+	return ptep_set_access_flags(vma, address, (pte_t *)pudp, pud_pte(entry), dirty);
+}
+
+static inline int pudp_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address, pud_t *pudp)
+{
+	return ptep_test_and_clear_young(vma, address, (pte_t *)pudp);
+}
+
+static inline int pud_young(pud_t pud)
+{
+	return pte_young(pud_pte(pud));
+}
+
+static inline void update_mmu_cache_pud(struct vm_area_struct *vma,
+					unsigned long address, pud_t *pudp)
+{
+	pte_t *ptep = (pte_t *)pudp;
+
+	update_mmu_cache(vma, address, ptep);
+}
+
+static inline pud_t pudp_establish(struct vm_area_struct *vma,
+				   unsigned long address, pud_t *pudp, pud_t pud)
+{
+	page_table_check_pud_set(vma->vm_mm, pudp, pud);
+	return __pud(atomic_long_xchg((atomic_long_t *)pudp, pud_val(pud)));
+}
+
+static inline pud_t pud_mkinvalid(pud_t pud)
+{
+	return __pud(pud_val(pud) & ~(_PAGE_PRESENT | _PAGE_PROT_NONE));
+}
+
+extern pud_t pudp_invalidate(struct vm_area_struct *vma, unsigned long address,
+			     pud_t *pudp);
+
+static inline pud_t pud_modify(pud_t pud, pgprot_t newprot)
+{
+	return pte_pud(pte_modify(pud_pte(pud), newprot));
+}
+
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 /*
@@ -933,7 +1028,7 @@ extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -980,7 +1075,6 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
  */
 #ifdef CONFIG_64BIT
 #define TASK_SIZE_64	(PGDIR_SIZE * PTRS_PER_PGD / 2)
-#define TASK_SIZE_MAX	LONG_MAX
 
 #ifdef CONFIG_COMPAT
 #define TASK_SIZE_32	(_AC(0x80000000, UL) - PAGE_SIZE)
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/processor.h linux-libre-6.16-gnu/arch/riscv/include/asm/processor.h
index 5f56eb9d114a..24d3af4d3807 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/processor.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/processor.h
@@ -13,6 +13,9 @@
 #include <vdso/processor.h>
 
 #include <asm/ptrace.h>
+#include <asm/insn-def.h>
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
 
 #define arch_get_mmap_end(addr, len, flags)			\
 ({								\
@@ -52,7 +55,6 @@
 #endif
 
 #ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
 
 struct task_struct;
 struct pt_regs;
@@ -79,6 +81,10 @@ struct pt_regs;
  *       Thus, the task does not own preempt_v. Any use of Vector will have to
  *       save preempt_v, if dirty, and fallback to non-preemptible kernel-mode
  *       Vector.
+ *  - bit 29: The thread voluntarily calls schedule() while holding an active
+ *    preempt_v. All preempt_v context should be dropped in such case because
+ *    V-regs are caller-saved. Only sstatus.VS=ON is persisted across a
+ *    schedule() call.
  *  - bit 30: The in-kernel preempt_v context is saved, and requries to be
  *    restored when returning to the context that owns the preempt_v.
  *  - bit 31: The in-kernel preempt_v context is dirty, as signaled by the
@@ -93,6 +99,7 @@ struct pt_regs;
 #define RISCV_PREEMPT_V			0x00000100
 #define RISCV_PREEMPT_V_DIRTY		0x80000000
 #define RISCV_PREEMPT_V_NEED_RESTORE	0x40000000
+#define RISCV_PREEMPT_V_IN_SCHEDULE	0x20000000
 
 /* CPU-specific state of a task */
 struct thread_struct {
@@ -103,6 +110,7 @@ struct thread_struct {
 	struct __riscv_d_ext_state fstate;
 	unsigned long bad_cause;
 	unsigned long envcfg;
+	unsigned long sum;
 	u32 riscv_v_flags;
 	u32 vstate_ctrl;
 	struct __riscv_v_ext_state vstate;
@@ -136,6 +144,27 @@ static inline void arch_thread_struct_whitelist(unsigned long *offset,
 #define KSTK_EIP(tsk)		(task_pt_regs(tsk)->epc)
 #define KSTK_ESP(tsk)		(task_pt_regs(tsk)->sp)
 
+#define PREFETCH_ASM(x)							\
+	ALTERNATIVE(__nops(1), PREFETCH_R(x, 0), 0,			\
+		    RISCV_ISA_EXT_ZICBOP, CONFIG_RISCV_ISA_ZICBOP)
+
+#define PREFETCHW_ASM(x)						\
+	ALTERNATIVE(__nops(1), PREFETCH_W(x, 0), 0,			\
+		    RISCV_ISA_EXT_ZICBOP, CONFIG_RISCV_ISA_ZICBOP)
+
+#ifdef CONFIG_RISCV_ISA_ZICBOP
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x)
+{
+	__asm__ __volatile__(PREFETCH_ASM(%0) : : "r" (x) : "memory");
+}
+
+#define ARCH_HAS_PREFETCHW
+static inline void prefetchw(const void *x)
+{
+	__asm__ __volatile__(PREFETCHW_ASM(%0) : : "r" (x) : "memory");
+}
+#endif /* CONFIG_RISCV_ISA_ZICBOP */
 
 /* Do necessary setup to start up a newly executed thread. */
 extern void start_thread(struct pt_regs *regs,
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/ptrace.h linux-libre-6.16-gnu/arch/riscv/include/asm/ptrace.h
index 2910231977cb..a7dc0e330757 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/ptrace.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/ptrace.h
@@ -175,7 +175,7 @@ static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs,
 	return 0;
 }
 
-static inline int regs_irqs_disabled(struct pt_regs *regs)
+static __always_inline bool regs_irqs_disabled(struct pt_regs *regs)
 {
 	return !(regs->status & SR_PIE);
 }
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/runtime-const.h linux-libre-6.16-gnu/arch/riscv/include/asm/runtime-const.h
index 451fd76b8811..d766e2b9e6df 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/runtime-const.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/runtime-const.h
@@ -206,7 +206,7 @@ static inline void __runtime_fixup_32(__le16 *lui_parcel, __le16 *addi_parcel, u
 		addi_insn_mask &= 0x07fff;
 	}
 
-	if (lower_immediate & 0x00000fff) {
+	if (lower_immediate & 0x00000fff || lui_insn == RISCV_INSN_NOP4) {
 		/* replace upper 12 bits of addi with lower 12 bits of val */
 		addi_insn &= addi_insn_mask;
 		addi_insn |= (lower_immediate & 0x00000fff) << 20;
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/sbi.h linux-libre-6.16-gnu/arch/riscv/include/asm/sbi.h
index 3d250824178b..341e74238aa0 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/sbi.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/sbi.h
@@ -35,6 +35,7 @@ enum sbi_ext_id {
 	SBI_EXT_DBCN = 0x4442434E,
 	SBI_EXT_STA = 0x535441,
 	SBI_EXT_NACL = 0x4E41434C,
+	SBI_EXT_FWFT = 0x46574654,
 
 	/* Experimentals extensions must lie within this range */
 	SBI_EXT_EXPERIMENTAL_START = 0x08000000,
@@ -402,6 +403,33 @@ enum sbi_ext_nacl_feature {
 #define SBI_NACL_SHMEM_SRET_X(__i)		((__riscv_xlen / 8) * (__i))
 #define SBI_NACL_SHMEM_SRET_X_LAST		31
 
+/* SBI function IDs for FW feature extension */
+#define SBI_EXT_FWFT_SET		0x0
+#define SBI_EXT_FWFT_GET		0x1
+
+enum sbi_fwft_feature_t {
+	SBI_FWFT_MISALIGNED_EXC_DELEG		= 0x0,
+	SBI_FWFT_LANDING_PAD			= 0x1,
+	SBI_FWFT_SHADOW_STACK			= 0x2,
+	SBI_FWFT_DOUBLE_TRAP			= 0x3,
+	SBI_FWFT_PTE_AD_HW_UPDATING		= 0x4,
+	SBI_FWFT_POINTER_MASKING_PMLEN		= 0x5,
+	SBI_FWFT_LOCAL_RESERVED_START		= 0x6,
+	SBI_FWFT_LOCAL_RESERVED_END		= 0x3fffffff,
+	SBI_FWFT_LOCAL_PLATFORM_START		= 0x40000000,
+	SBI_FWFT_LOCAL_PLATFORM_END		= 0x7fffffff,
+
+	SBI_FWFT_GLOBAL_RESERVED_START		= 0x80000000,
+	SBI_FWFT_GLOBAL_RESERVED_END		= 0xbfffffff,
+	SBI_FWFT_GLOBAL_PLATFORM_START		= 0xc0000000,
+	SBI_FWFT_GLOBAL_PLATFORM_END		= 0xffffffff,
+};
+
+#define SBI_FWFT_PLATFORM_FEATURE_BIT		BIT(30)
+#define SBI_FWFT_GLOBAL_FEATURE_BIT		BIT(31)
+
+#define SBI_FWFT_SET_FLAG_LOCK			BIT(0)
+
 /* SBI spec version fields */
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
@@ -419,6 +447,11 @@ enum sbi_ext_nacl_feature {
 #define SBI_ERR_ALREADY_STARTED -7
 #define SBI_ERR_ALREADY_STOPPED -8
 #define SBI_ERR_NO_SHMEM	-9
+#define SBI_ERR_INVALID_STATE	-10
+#define SBI_ERR_BAD_RANGE	-11
+#define SBI_ERR_TIMEOUT		-12
+#define SBI_ERR_IO		-13
+#define SBI_ERR_DENIED_LOCKED	-14
 
 extern unsigned long sbi_spec_version;
 struct sbiret {
@@ -470,6 +503,23 @@ int sbi_remote_hfence_vvma_asid(const struct cpumask *cpu_mask,
 				unsigned long asid);
 long sbi_probe_extension(int ext);
 
+int sbi_fwft_set(u32 feature, unsigned long value, unsigned long flags);
+int sbi_fwft_set_cpumask(const cpumask_t *mask, u32 feature,
+			 unsigned long value, unsigned long flags);
+/**
+ * sbi_fwft_set_online_cpus() - Set a feature on all online cpus
+ * @feature: The feature to be set
+ * @value: The feature value to be set
+ * @flags: FWFT feature set flags
+ *
+ * Return: 0 on success, appropriate linux error code otherwise.
+ */
+static inline int sbi_fwft_set_online_cpus(u32 feature, unsigned long value,
+					   unsigned long flags)
+{
+	return sbi_fwft_set_cpumask(cpu_online_mask, feature, value, flags);
+}
+
 /* Check if current SBI specification version is 0.1 or not */
 static inline int sbi_spec_is_0_1(void)
 {
@@ -503,11 +553,21 @@ static inline int sbi_err_map_linux_errno(int err)
 	case SBI_SUCCESS:
 		return 0;
 	case SBI_ERR_DENIED:
+	case SBI_ERR_DENIED_LOCKED:
 		return -EPERM;
 	case SBI_ERR_INVALID_PARAM:
+	case SBI_ERR_INVALID_STATE:
 		return -EINVAL;
+	case SBI_ERR_BAD_RANGE:
+		return -ERANGE;
 	case SBI_ERR_INVALID_ADDRESS:
 		return -EFAULT;
+	case SBI_ERR_NO_SHMEM:
+		return -ENOMEM;
+	case SBI_ERR_TIMEOUT:
+		return -ETIMEDOUT;
+	case SBI_ERR_IO:
+		return -EIO;
 	case SBI_ERR_NOT_SUPPORTED:
 	case SBI_ERR_FAILURE:
 	default:
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/syscall.h linux-libre-6.16-gnu/arch/riscv/include/asm/syscall.h
index eceabf59ae48..34313387f977 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/syscall.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/syscall.h
@@ -30,6 +30,13 @@ static inline int syscall_get_nr(struct task_struct *task,
 	return regs->a7;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->a7 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
@@ -69,6 +76,18 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	args[5] = regs->a5;
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	regs->orig_a0 = args[0];
+	regs->a1 = args[1];
+	regs->a2 = args[2];
+	regs->a3 = args[3];
+	regs->a4 = args[4];
+	regs->a5 = args[5];
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 #ifdef CONFIG_64BIT
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/tlbflush.h linux-libre-6.16-gnu/arch/riscv/include/asm/tlbflush.h
index ce0dd0fed764..1a20dd746a49 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/tlbflush.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/tlbflush.h
@@ -56,6 +56,8 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end);
+void flush_pud_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			 unsigned long end);
 #endif
 
 bool arch_tlbbatch_should_defer(struct mm_struct *mm);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/uaccess.h linux-libre-6.16-gnu/arch/riscv/include/asm/uaccess.h
index fee56b0c8058..b88a6218b7f2 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/uaccess.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/uaccess.h
@@ -61,6 +61,19 @@ static inline unsigned long __untagged_addr_remote(struct mm_struct *mm, unsigne
 #define __disable_user_access()							\
 	__asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory")
 
+/*
+ * This is the smallest unsigned integer type that can fit a value
+ * (up to 'long long')
+ */
+#define __inttype(x) __typeof__(		\
+	__typefits(x, char,			\
+	  __typefits(x, short,			\
+	    __typefits(x, int,			\
+	      __typefits(x, long, 0ULL)))))
+
+#define __typefits(x, type, not) \
+	__builtin_choose_expr(sizeof(x) <= sizeof(type), (unsigned type)0, not)
+
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
@@ -83,27 +96,59 @@ static inline unsigned long __untagged_addr_remote(struct mm_struct *mm, unsigne
  * call.
  */
 
-#define __get_user_asm(insn, x, ptr, err)			\
+#ifdef CONFIG_CC_HAS_ASM_GOTO_OUTPUT
+#define __get_user_asm(insn, x, ptr, label)			\
+	asm_goto_output(					\
+		"1:\n"						\
+		"	" insn " %0, %1\n"			\
+		_ASM_EXTABLE_UACCESS_ERR(1b, %l2, %0)		\
+		: "=&r" (x)					\
+		: "m" (*(ptr)) : : label)
+#else /* !CONFIG_CC_HAS_ASM_GOTO_OUTPUT */
+#define __get_user_asm(insn, x, ptr, label)			\
 do {								\
-	__typeof__(x) __x;					\
+	long __gua_err = 0;					\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
 		"	" insn " %1, %2\n"			\
 		"2:\n"						\
 		_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %0, %1)	\
-		: "+r" (err), "=&r" (__x)			\
+		: "+r" (__gua_err), "=&r" (x)			\
 		: "m" (*(ptr)));				\
-	(x) = __x;						\
+	if (__gua_err)						\
+		goto label;					\
 } while (0)
+#endif /* CONFIG_CC_HAS_ASM_GOTO_OUTPUT */
 
 #ifdef CONFIG_64BIT
-#define __get_user_8(x, ptr, err) \
-	__get_user_asm("ld", x, ptr, err)
+#define __get_user_8(x, ptr, label) \
+	__get_user_asm("ld", x, ptr, label)
 #else /* !CONFIG_64BIT */
-#define __get_user_8(x, ptr, err)				\
+
+#ifdef CONFIG_CC_HAS_ASM_GOTO_OUTPUT
+#define __get_user_8(x, ptr, label)				\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
 	u32 __lo, __hi;						\
+	asm_goto_output(					\
+		"1:\n"						\
+		"	lw %0, %2\n"				\
+		"2:\n"						\
+		"	lw %1, %3\n"				\
+		_ASM_EXTABLE_UACCESS_ERR(1b, %l4, %0)		\
+		_ASM_EXTABLE_UACCESS_ERR(2b, %l4, %0)		\
+		: "=&r" (__lo), "=r" (__hi)			\
+		: "m" (__ptr[__LSW]), "m" (__ptr[__MSW])	\
+		: : label);                                     \
+	(x) = (__typeof__(x))((__typeof__((x) - (x)))(		\
+		(((u64)__hi << 32) | __lo)));			\
+} while (0)
+#else /* !CONFIG_CC_HAS_ASM_GOTO_OUTPUT */
+#define __get_user_8(x, ptr, label)				\
+do {								\
+	u32 __user *__ptr = (u32 __user *)(ptr);		\
+	u32 __lo, __hi;						\
+	long __gu8_err = 0;					\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
 		"	lw %1, %3\n"				\
@@ -112,35 +157,62 @@ do {								\
 		"3:\n"						\
 		_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 3b, %0, %1)	\
 		_ASM_EXTABLE_UACCESS_ERR_ZERO(2b, 3b, %0, %1)	\
-		: "+r" (err), "=&r" (__lo), "=r" (__hi)		\
+		: "+r" (__gu8_err), "=&r" (__lo), "=r" (__hi)	\
 		: "m" (__ptr[__LSW]), "m" (__ptr[__MSW]));	\
-	if (err)						\
+	if (__gu8_err) {					\
 		__hi = 0;					\
-	(x) = (__typeof__(x))((__typeof__((x)-(x)))(		\
+		goto label;					\
+	}							\
+	(x) = (__typeof__(x))((__typeof__((x) - (x)))(		\
 		(((u64)__hi << 32) | __lo)));			\
 } while (0)
+#endif /* CONFIG_CC_HAS_ASM_GOTO_OUTPUT */
+
 #endif /* CONFIG_64BIT */
 
-#define __get_user_nocheck(x, __gu_ptr, __gu_err)		\
+unsigned long __must_check __asm_copy_to_user_sum_enabled(void __user *to,
+	const void *from, unsigned long n);
+unsigned long __must_check __asm_copy_from_user_sum_enabled(void *to,
+	const void __user *from, unsigned long n);
+
+#define __get_user_nocheck(x, __gu_ptr, label)			\
 do {								\
+	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&	\
+	    !IS_ALIGNED((uintptr_t)__gu_ptr, sizeof(*__gu_ptr))) {	\
+		if (__asm_copy_from_user_sum_enabled(&(x), __gu_ptr, sizeof(*__gu_ptr))) \
+			goto label;				\
+		break;						\
+	}							\
 	switch (sizeof(*__gu_ptr)) {				\
 	case 1:							\
-		__get_user_asm("lb", (x), __gu_ptr, __gu_err);	\
+		__get_user_asm("lb", (x), __gu_ptr, label);	\
 		break;						\
 	case 2:							\
-		__get_user_asm("lh", (x), __gu_ptr, __gu_err);	\
+		__get_user_asm("lh", (x), __gu_ptr, label);	\
 		break;						\
 	case 4:							\
-		__get_user_asm("lw", (x), __gu_ptr, __gu_err);	\
+		__get_user_asm("lw", (x), __gu_ptr, label);	\
 		break;						\
 	case 8:							\
-		__get_user_8((x), __gu_ptr, __gu_err);	\
+		__get_user_8((x), __gu_ptr, label);		\
 		break;						\
 	default:						\
 		BUILD_BUG();					\
 	}							\
 } while (0)
 
+#define __get_user_error(x, ptr, err)					\
+do {									\
+	__label__ __gu_failed;						\
+									\
+	__get_user_nocheck(x, ptr, __gu_failed);			\
+		err = 0;						\
+		break;							\
+__gu_failed:								\
+		x = 0;							\
+		err = -EFAULT;						\
+} while (0)
+
 /**
  * __get_user: - Get a simple variable from user space, with less checking.
  * @x:   Variable to store result.
@@ -165,13 +237,16 @@ do {								\
 ({								\
 	const __typeof__(*(ptr)) __user *__gu_ptr = untagged_addr(ptr); \
 	long __gu_err = 0;					\
+	__typeof__(x) __gu_val;					\
 								\
 	__chk_user_ptr(__gu_ptr);				\
 								\
 	__enable_user_access();					\
-	__get_user_nocheck(x, __gu_ptr, __gu_err);		\
+	__get_user_error(__gu_val, __gu_ptr, __gu_err);		\
 	__disable_user_access();				\
 								\
+	(x) = __gu_val;						\
+								\
 	__gu_err;						\
 })
 
@@ -201,61 +276,73 @@ do {								\
 		((x) = (__force __typeof__(x))0, -EFAULT);	\
 })
 
-#define __put_user_asm(insn, x, ptr, err)			\
+#define __put_user_asm(insn, x, ptr, label)			\
 do {								\
 	__typeof__(*(ptr)) __x = x;				\
-	__asm__ __volatile__ (					\
+	asm goto(						\
 		"1:\n"						\
-		"	" insn " %z2, %1\n"			\
-		"2:\n"						\
-		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %0)		\
-		: "+r" (err), "=m" (*(ptr))			\
-		: "rJ" (__x));					\
+		"	" insn " %z0, %1\n"			\
+		_ASM_EXTABLE(1b, %l2)				\
+		: : "rJ" (__x), "m"(*(ptr)) : : label);		\
 } while (0)
 
 #ifdef CONFIG_64BIT
-#define __put_user_8(x, ptr, err) \
-	__put_user_asm("sd", x, ptr, err)
+#define __put_user_8(x, ptr, label) \
+	__put_user_asm("sd", x, ptr, label)
 #else /* !CONFIG_64BIT */
-#define __put_user_8(x, ptr, err)				\
+#define __put_user_8(x, ptr, label)				\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
 	u64 __x = (__typeof__((x)-(x)))(x);			\
-	__asm__ __volatile__ (					\
+	asm goto(						\
 		"1:\n"						\
-		"	sw %z3, %1\n"				\
+		"	sw %z0, %2\n"				\
 		"2:\n"						\
-		"	sw %z4, %2\n"				\
-		"3:\n"						\
-		_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %0)		\
-		_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %0)		\
-		: "+r" (err),					\
-			"=m" (__ptr[__LSW]),			\
-			"=m" (__ptr[__MSW])			\
-		: "rJ" (__x), "rJ" (__x >> 32));		\
+		"	sw %z1, %3\n"				\
+		_ASM_EXTABLE(1b, %l4)				\
+		_ASM_EXTABLE(2b, %l4)				\
+		: : "rJ" (__x), "rJ" (__x >> 32),		\
+			"m" (__ptr[__LSW]),			\
+			"m" (__ptr[__MSW]) : : label);		\
 } while (0)
 #endif /* CONFIG_64BIT */
 
-#define __put_user_nocheck(x, __gu_ptr, __pu_err)					\
+#define __put_user_nocheck(x, __gu_ptr, label)			\
 do {								\
+	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&	\
+	    !IS_ALIGNED((uintptr_t)__gu_ptr, sizeof(*__gu_ptr))) {	\
+		__inttype(x) ___val = (__inttype(x))x;			\
+		if (__asm_copy_to_user_sum_enabled(__gu_ptr, &(___val), sizeof(*__gu_ptr))) \
+			goto label;				\
+		break;						\
+	}							\
 	switch (sizeof(*__gu_ptr)) {				\
 	case 1:							\
-		__put_user_asm("sb", (x), __gu_ptr, __pu_err);	\
+		__put_user_asm("sb", (x), __gu_ptr, label);	\
 		break;						\
 	case 2:							\
-		__put_user_asm("sh", (x), __gu_ptr, __pu_err);	\
+		__put_user_asm("sh", (x), __gu_ptr, label);	\
 		break;						\
 	case 4:							\
-		__put_user_asm("sw", (x), __gu_ptr, __pu_err);	\
+		__put_user_asm("sw", (x), __gu_ptr, label);	\
 		break;						\
 	case 8:							\
-		__put_user_8((x), __gu_ptr, __pu_err);	\
+		__put_user_8((x), __gu_ptr, label);		\
 		break;						\
 	default:						\
 		BUILD_BUG();					\
 	}							\
 } while (0)
 
+#define __put_user_error(x, ptr, err)				\
+do {								\
+	__label__ err_label;					\
+	__put_user_nocheck(x, ptr, err_label);			\
+	break;							\
+err_label:							\
+	(err) = -EFAULT;					\
+} while (0)
+
 /**
  * __put_user: - Write a simple value into user space, with less checking.
  * @x:   Value to copy to user space.
@@ -286,7 +373,7 @@ do {								\
 	__chk_user_ptr(__gu_ptr);				\
 								\
 	__enable_user_access();					\
-	__put_user_nocheck(__val, __gu_ptr, __pu_err);		\
+	__put_user_error(__val, __gu_ptr, __pu_err);		\
 	__disable_user_access();				\
 								\
 	__pu_err;						\
@@ -351,23 +438,45 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 }
 
 #define __get_kernel_nofault(dst, src, type, err_label)			\
-do {									\
-	long __kr_err = 0;						\
-									\
-	__get_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err);	\
-	if (unlikely(__kr_err))						\
-		goto err_label;						\
-} while (0)
+	__get_user_nocheck(*((type *)(dst)), (type *)(src), err_label)
 
 #define __put_kernel_nofault(dst, src, type, err_label)			\
-do {									\
-	long __kr_err = 0;						\
-									\
-	__put_user_nocheck(*((type *)(src)), (type *)(dst), __kr_err);	\
-	if (unlikely(__kr_err))						\
-		goto err_label;						\
+	__put_user_nocheck(*((type *)(src)), (type *)(dst), err_label)
+
+static __must_check __always_inline bool user_access_begin(const void __user *ptr, size_t len)
+{
+	if (unlikely(!access_ok(ptr, len)))
+		return 0;
+	__enable_user_access();
+	return 1;
+}
+#define user_access_begin user_access_begin
+#define user_access_end __disable_user_access
+
+static inline unsigned long user_access_save(void) { return 0UL; }
+static inline void user_access_restore(unsigned long enabled) { }
+
+/*
+ * We want the unsafe accessors to always be inlined and use
+ * the error labels - thus the macro games.
+ */
+#define unsafe_put_user(x, ptr, label)					\
+	__put_user_nocheck(x, (ptr), label)
+
+#define unsafe_get_user(x, ptr, label)	do {				\
+	__inttype(*(ptr)) __gu_val;					\
+	__get_user_nocheck(__gu_val, (ptr), label);			\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 } while (0)
 
+#define unsafe_copy_to_user(_dst, _src, _len, label)			\
+	if (__asm_copy_to_user_sum_enabled(_dst, _src, _len))		\
+		goto label;
+
+#define unsafe_copy_from_user(_dst, _src, _len, label)			\
+	if (__asm_copy_from_user_sum_enabled(_dst, _src, _len))		\
+		goto label;
+
 #else /* CONFIG_MMU */
 #include <asm-generic/uaccess.h>
 #endif /* CONFIG_MMU */
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/vdso/getrandom.h linux-libre-6.16-gnu/arch/riscv/include/asm/vdso/getrandom.h
new file mode 100644
index 000000000000..c6d66895c1f5
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/vdso/getrandom.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 Xi Ruoyao <xry111@xry111.site>. All Rights Reserved.
+ */
+#ifndef __ASM_VDSO_GETRANDOM_H
+#define __ASM_VDSO_GETRANDOM_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/unistd.h>
+
+static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, unsigned int _flags)
+{
+	register long ret asm("a0");
+	register long nr asm("a7") = __NR_getrandom;
+	register void *buffer asm("a0") = _buffer;
+	register size_t len asm("a1") = _len;
+	register unsigned int flags asm("a2") = _flags;
+
+	asm volatile ("ecall\n"
+		      : "=r" (ret)
+		      : "r" (nr), "r" (buffer), "r" (len), "r" (flags)
+		      : "memory");
+
+	return ret;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_GETRANDOM_H */
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/vector.h linux-libre-6.16-gnu/arch/riscv/include/asm/vector.h
index e8a83f55be2b..b61786d43c20 100644
--- linux-libre-6.15-gnu/arch/riscv/include/asm/vector.h
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/vector.h
@@ -120,6 +120,11 @@ static __always_inline void riscv_v_disable(void)
 		csr_clear(CSR_SSTATUS, SR_VS);
 }
 
+static __always_inline bool riscv_v_is_on(void)
+{
+	return !!(csr_read(CSR_SSTATUS) & SR_VS);
+}
+
 static __always_inline void __vstate_csr_save(struct __riscv_v_ext_state *dest)
 {
 	asm volatile (
@@ -200,11 +205,11 @@ static inline void __riscv_v_vstate_save(struct __riscv_v_ext_state *save_to,
 			THEAD_VSETVLI_T4X0E8M8D1
 			THEAD_VSB_V_V0T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VSB_V_V0T0
+			THEAD_VSB_V_V8T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VSB_V_V0T0
+			THEAD_VSB_V_V16T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VSB_V_V0T0
+			THEAD_VSB_V_V24T0
 			: : "r" (datap) : "memory", "t0", "t4");
 	} else {
 		asm volatile (
@@ -236,11 +241,11 @@ static inline void __riscv_v_vstate_restore(struct __riscv_v_ext_state *restore_
 			THEAD_VSETVLI_T4X0E8M8D1
 			THEAD_VLB_V_V0T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VLB_V_V0T0
+			THEAD_VLB_V_V8T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VLB_V_V0T0
+			THEAD_VLB_V_V16T0
 			"add		t0, t0, t4\n\t"
-			THEAD_VLB_V_V0T0
+			THEAD_VLB_V_V24T0
 			: : "r" (datap) : "memory", "t0", "t4");
 	} else {
 		asm volatile (
@@ -366,6 +371,11 @@ static inline void __switch_to_vector(struct task_struct *prev,
 	struct pt_regs *regs;
 
 	if (riscv_preempt_v_started(prev)) {
+		if (riscv_v_is_on()) {
+			WARN_ON(prev->thread.riscv_v_flags & RISCV_V_CTX_DEPTH_MASK);
+			riscv_v_disable();
+			prev->thread.riscv_v_flags |= RISCV_PREEMPT_V_IN_SCHEDULE;
+		}
 		if (riscv_preempt_v_dirty(prev)) {
 			__riscv_v_vstate_save(&prev->thread.kernel_vstate,
 					      prev->thread.kernel_vstate.datap);
@@ -376,10 +386,16 @@ static inline void __switch_to_vector(struct task_struct *prev,
 		riscv_v_vstate_save(&prev->thread.vstate, regs);
 	}
 
-	if (riscv_preempt_v_started(next))
-		riscv_preempt_v_set_restore(next);
-	else
+	if (riscv_preempt_v_started(next)) {
+		if (next->thread.riscv_v_flags & RISCV_PREEMPT_V_IN_SCHEDULE) {
+			next->thread.riscv_v_flags &= ~RISCV_PREEMPT_V_IN_SCHEDULE;
+			riscv_v_enable();
+		} else {
+			riscv_preempt_v_set_restore(next);
+		}
+	} else {
 		riscv_v_vstate_set_restore(next, task_pt_regs(next));
+	}
 }
 
 void riscv_v_vstate_ctrl_init(struct task_struct *tsk);
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/vendor_extensions/sifive.h linux-libre-6.16-gnu/arch/riscv/include/asm/vendor_extensions/sifive.h
new file mode 100644
index 000000000000..ac00e500361c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/vendor_extensions/sifive.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_VENDOR_EXTENSIONS_SIFIVE_H
+#define _ASM_RISCV_VENDOR_EXTENSIONS_SIFIVE_H
+
+#include <asm/vendor_extensions.h>
+
+#include <linux/types.h>
+
+#define RISCV_ISA_VENDOR_EXT_XSFVQMACCDOD		0
+#define RISCV_ISA_VENDOR_EXT_XSFVQMACCQOQ		1
+#define RISCV_ISA_VENDOR_EXT_XSFVFNRCLIPXFQF		2
+#define RISCV_ISA_VENDOR_EXT_XSFVFWMACCQQQ		3
+
+extern struct riscv_isa_vendor_ext_data_list riscv_isa_vendor_ext_list_sifive;
+
+#endif
diff --git linux-libre-6.15-gnu/arch/riscv/include/asm/vendor_extensions/sifive_hwprobe.h linux-libre-6.16-gnu/arch/riscv/include/asm/vendor_extensions/sifive_hwprobe.h
new file mode 100644
index 000000000000..90a61abd033c
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/include/asm/vendor_extensions/sifive_hwprobe.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_VENDOR_EXTENSIONS_SIFIVE_HWPROBE_H
+#define _ASM_RISCV_VENDOR_EXTENSIONS_SIFIVE_HWPROBE_H
+
+#include <linux/cpumask.h>
+
+#include <uapi/asm/hwprobe.h>
+
+#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE
+void hwprobe_isa_vendor_ext_sifive_0(struct riscv_hwprobe *pair, const struct cpumask *cpus);
+#else
+static inline void hwprobe_isa_vendor_ext_sifive_0(struct riscv_hwprobe *pair,
+						   const struct cpumask *cpus)
+{
+	pair->value = 0;
+}
+#endif
+
+#endif
diff --git linux-libre-6.15-gnu/arch/riscv/include/uapi/asm/hwprobe.h linux-libre-6.16-gnu/arch/riscv/include/uapi/asm/hwprobe.h
index 3c2fce939673..aaf6ad970499 100644
--- linux-libre-6.15-gnu/arch/riscv/include/uapi/asm/hwprobe.h
+++ linux-libre-6.16-gnu/arch/riscv/include/uapi/asm/hwprobe.h
@@ -81,6 +81,7 @@ struct riscv_hwprobe {
 #define		RISCV_HWPROBE_EXT_ZICBOM	(1ULL << 55)
 #define		RISCV_HWPROBE_EXT_ZAAMO		(1ULL << 56)
 #define		RISCV_HWPROBE_EXT_ZALRSC	(1ULL << 57)
+#define		RISCV_HWPROBE_EXT_ZABHA		(1ULL << 58)
 #define RISCV_HWPROBE_KEY_CPUPERF_0	5
 #define		RISCV_HWPROBE_MISALIGNED_UNKNOWN	(0 << 0)
 #define		RISCV_HWPROBE_MISALIGNED_EMULATED	(1 << 0)
@@ -104,6 +105,7 @@ struct riscv_hwprobe {
 #define		RISCV_HWPROBE_MISALIGNED_VECTOR_UNSUPPORTED	4
 #define RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0	11
 #define RISCV_HWPROBE_KEY_ZICBOM_BLOCK_SIZE	12
+#define RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0	13
 /* Increase RISCV_HWPROBE_MAX_KEY when adding items. */
 
 /* Flags */
diff --git linux-libre-6.15-gnu/arch/riscv/include/uapi/asm/vendor/sifive.h linux-libre-6.16-gnu/arch/riscv/include/uapi/asm/vendor/sifive.h
new file mode 100644
index 000000000000..9f3278a4b298
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/include/uapi/asm/vendor/sifive.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#define	RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCDOD		(1 << 0)
+#define	RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCQOQ		(1 << 1)
+#define	RISCV_HWPROBE_VENDOR_EXT_XSFVFNRCLIPXFQF		(1 << 2)
+#define	RISCV_HWPROBE_VENDOR_EXT_XSFVFWMACCQQQ		(1 << 3)
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/Makefile linux-libre-6.16-gnu/arch/riscv/kernel/Makefile
index f7480c9c6f8d..c7b542573407 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/kernel/Makefile
@@ -43,7 +43,7 @@ CFLAGS_sbi_ecall.o += -D__NO_FORTIFY
 endif
 endif
 
-extra-y += vmlinux.lds
+always-$(KBUILD_BUILTIN) += vmlinux.lds
 
 obj-y	+= head.o
 obj-y	+= soc.o
@@ -107,7 +107,7 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_KEXEC_CORE)	+= kexec_relocate.o crash_save_regs.o machine_kexec.o
-obj-$(CONFIG_KEXEC_FILE)	+= elf_kexec.o machine_kexec_file.o
+obj-$(CONFIG_KEXEC_FILE)	+= kexec_elf.o kexec_image.o machine_kexec_file.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_VMCORE_INFO)	+= vmcore_info.o
 
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/asm-offsets.c linux-libre-6.16-gnu/arch/riscv/kernel/asm-offsets.c
index 16490755304e..6e8c0d6feae9 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/asm-offsets.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/asm-offsets.c
@@ -34,6 +34,7 @@ void asm_offsets(void)
 	OFFSET(TASK_THREAD_S9, task_struct, thread.s[9]);
 	OFFSET(TASK_THREAD_S10, task_struct, thread.s[10]);
 	OFFSET(TASK_THREAD_S11, task_struct, thread.s[11]);
+	OFFSET(TASK_THREAD_SUM, task_struct, thread.sum);
 
 	OFFSET(TASK_TI_CPU, task_struct, thread_info.cpu);
 	OFFSET(TASK_TI_PREEMPT_COUNT, task_struct, thread_info.preempt_count);
@@ -346,6 +347,10 @@ void asm_offsets(void)
 		  offsetof(struct task_struct, thread.s[11])
 		- offsetof(struct task_struct, thread.ra)
 	);
+	DEFINE(TASK_THREAD_SUM_RA,
+		  offsetof(struct task_struct, thread.sum)
+		- offsetof(struct task_struct, thread.ra)
+	);
 
 	DEFINE(TASK_THREAD_F0_F0,
 		  offsetof(struct task_struct, thread.fstate.f[0])
@@ -493,6 +498,12 @@ void asm_offsets(void)
 	DEFINE(STACKFRAME_SIZE_ON_STACK, ALIGN(sizeof(struct stackframe), STACK_ALIGN));
 	OFFSET(STACKFRAME_FP, stackframe, fp);
 	OFFSET(STACKFRAME_RA, stackframe, ra);
+#ifdef CONFIG_FUNCTION_TRACER
+	DEFINE(FTRACE_OPS_FUNC,		offsetof(struct ftrace_ops, func));
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	DEFINE(FTRACE_OPS_DIRECT_CALL,	offsetof(struct ftrace_ops, direct_call));
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+#endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 	DEFINE(FREGS_SIZE_ON_STACK, ALIGN(sizeof(struct __arch_ftrace_regs), STACK_ALIGN));
@@ -501,6 +512,13 @@ void asm_offsets(void)
 	DEFINE(FREGS_SP,	    offsetof(struct __arch_ftrace_regs, sp));
 	DEFINE(FREGS_S0,	    offsetof(struct __arch_ftrace_regs, s0));
 	DEFINE(FREGS_T1,	    offsetof(struct __arch_ftrace_regs, t1));
+#ifdef CONFIG_CC_IS_CLANG
+	DEFINE(FREGS_T2,	    offsetof(struct __arch_ftrace_regs, t2));
+	DEFINE(FREGS_T3,	    offsetof(struct __arch_ftrace_regs, t3));
+	DEFINE(FREGS_T4,	    offsetof(struct __arch_ftrace_regs, t4));
+	DEFINE(FREGS_T5,	    offsetof(struct __arch_ftrace_regs, t5));
+	DEFINE(FREGS_T6,	    offsetof(struct __arch_ftrace_regs, t6));
+#endif
 	DEFINE(FREGS_A0,	    offsetof(struct __arch_ftrace_regs, a0));
 	DEFINE(FREGS_A1,	    offsetof(struct __arch_ftrace_regs, a1));
 	DEFINE(FREGS_A2,	    offsetof(struct __arch_ftrace_regs, a2));
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/cpu_ops_sbi.c linux-libre-6.16-gnu/arch/riscv/kernel/cpu_ops_sbi.c
index e6fbaaf54956..87d655944803 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/cpu_ops_sbi.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/cpu_ops_sbi.c
@@ -18,10 +18,10 @@ const struct cpu_operations cpu_ops_sbi;
 
 /*
  * Ordered booting via HSM brings one cpu at a time. However, cpu hotplug can
- * be invoked from multiple threads in parallel. Define a per cpu data
+ * be invoked from multiple threads in parallel. Define an array of boot data
  * to handle that.
  */
-static DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data);
+static struct sbi_hart_boot_data boot_data[NR_CPUS];
 
 static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr,
 			      unsigned long priv)
@@ -67,7 +67,7 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
 	unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
 	unsigned long hartid = cpuid_to_hartid_map(cpuid);
 	unsigned long hsm_data;
-	struct sbi_hart_boot_data *bdata = &per_cpu(boot_data, cpuid);
+	struct sbi_hart_boot_data *bdata = &boot_data[cpuid];
 
 	/* Make sure tidle is updated */
 	smp_mb();
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/cpufeature.c linux-libre-6.16-gnu/arch/riscv/kernel/cpufeature.c
index 2054f6c4b0ae..743d53415572 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/cpufeature.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/cpufeature.c
@@ -32,6 +32,7 @@
 #define NUM_ALPHA_EXTS ('z' - 'a' + 1)
 
 static bool any_cpu_has_zicboz;
+static bool any_cpu_has_zicbop;
 static bool any_cpu_has_zicbom;
 
 unsigned long elf_hwcap __read_mostly;
@@ -119,6 +120,21 @@ static int riscv_ext_zicboz_validate(const struct riscv_isa_ext_data *data,
 	return 0;
 }
 
+static int riscv_ext_zicbop_validate(const struct riscv_isa_ext_data *data,
+				     const unsigned long *isa_bitmap)
+{
+	if (!riscv_cbop_block_size) {
+		pr_err("Zicbop detected in ISA string, disabling as no cbop-block-size found\n");
+		return -EINVAL;
+	}
+	if (!is_power_of_2(riscv_cbop_block_size)) {
+		pr_err("Zicbop disabled as cbop-block-size present, but is not a power-of-2\n");
+		return -EINVAL;
+	}
+	any_cpu_has_zicbop = true;
+	return 0;
+}
+
 static int riscv_ext_f_validate(const struct riscv_isa_ext_data *data,
 				const unsigned long *isa_bitmap)
 {
@@ -442,6 +458,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_SUPERSET_VALIDATE(v, RISCV_ISA_EXT_v, riscv_v_exts, riscv_ext_vector_float_validate),
 	__RISCV_ISA_EXT_DATA(h, RISCV_ISA_EXT_h),
 	__RISCV_ISA_EXT_SUPERSET_VALIDATE(zicbom, RISCV_ISA_EXT_ZICBOM, riscv_xlinuxenvcfg_exts, riscv_ext_zicbom_validate),
+	__RISCV_ISA_EXT_DATA_VALIDATE(zicbop, RISCV_ISA_EXT_ZICBOP, riscv_ext_zicbop_validate),
 	__RISCV_ISA_EXT_SUPERSET_VALIDATE(zicboz, RISCV_ISA_EXT_ZICBOZ, riscv_xlinuxenvcfg_exts, riscv_ext_zicboz_validate),
 	__RISCV_ISA_EXT_DATA(ziccrse, RISCV_ISA_EXT_ZICCRSE),
 	__RISCV_ISA_EXT_DATA(zicntr, RISCV_ISA_EXT_ZICNTR),
@@ -1112,6 +1129,10 @@ void __init riscv_user_isa_enable(void)
 		current->thread.envcfg |= ENVCFG_CBCFE;
 	else if (any_cpu_has_zicbom)
 		pr_warn("Zicbom disabled as it is unavailable on some harts\n");
+
+	if (!riscv_has_extension_unlikely(RISCV_ISA_EXT_ZICBOP) &&
+	    any_cpu_has_zicbop)
+		pr_warn("Zicbop disabled as it is unavailable on some harts\n");
 }
 
 #ifdef CONFIG_RISCV_ALTERNATIVE
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/efi-header.S linux-libre-6.16-gnu/arch/riscv/kernel/efi-header.S
index c5f17c2710b5..2efc3aaf4a8c 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/efi-header.S
+++ linux-libre-6.16-gnu/arch/riscv/kernel/efi-header.S
@@ -9,7 +9,7 @@
 #include <asm/set_memory.h>
 
 	.macro	__EFI_PE_HEADER
-	.long	PE_MAGIC
+	.long	IMAGE_NT_SIGNATURE
 coff_header:
 #ifdef CONFIG_64BIT
 	.short	IMAGE_FILE_MACHINE_RISCV64		// Machine
@@ -27,9 +27,9 @@ coff_header:
 
 optional_header:
 #ifdef CONFIG_64BIT
-	.short	PE_OPT_MAGIC_PE32PLUS			// PE32+ format
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC		// PE32+ format
 #else
-	.short	PE_OPT_MAGIC_PE32			// PE32 format
+	.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC		// PE32 format
 #endif
 	.byte	0x02					// MajorLinkerVersion
 	.byte	0x14					// MinorLinkerVersion
@@ -64,7 +64,7 @@ extra_header_fields:
 	.long	efi_header_end - _start			// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
+	.short	IMAGE_DLLCHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/elf_kexec.c linux-libre-6.16-gnu/arch/riscv/kernel/elf_kexec.c
deleted file mode 100644
index e783a72d051f..000000000000
--- linux-libre-6.15-gnu/arch/riscv/kernel/elf_kexec.c
+++ /dev/null
@@ -1,485 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Load ELF vmlinux file for the kexec_file_load syscall.
- *
- * Copyright (C) 2021 Huawei Technologies Co, Ltd.
- *
- * Author: Liao Chang (liaochang1@huawei.com)
- *
- * Based on kexec-tools' kexec-elf-riscv.c, heavily modified
- * for kernel.
- */
-
-#define pr_fmt(fmt)	"kexec_image: " fmt
-
-#include <linux/elf.h>
-#include <linux/kexec.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/libfdt.h>
-#include <linux/types.h>
-#include <linux/memblock.h>
-#include <linux/vmalloc.h>
-#include <asm/setup.h>
-
-int arch_kimage_file_post_load_cleanup(struct kimage *image)
-{
-	kvfree(image->arch.fdt);
-	image->arch.fdt = NULL;
-
-	vfree(image->elf_headers);
-	image->elf_headers = NULL;
-	image->elf_headers_sz = 0;
-
-	return kexec_image_post_load_cleanup_default(image);
-}
-
-static int riscv_kexec_elf_load(struct kimage *image, struct elfhdr *ehdr,
-				struct kexec_elf_info *elf_info, unsigned long old_pbase,
-				unsigned long new_pbase)
-{
-	int i;
-	int ret = 0;
-	size_t size;
-	struct kexec_buf kbuf;
-	const struct elf_phdr *phdr;
-
-	kbuf.image = image;
-
-	for (i = 0; i < ehdr->e_phnum; i++) {
-		phdr = &elf_info->proghdrs[i];
-		if (phdr->p_type != PT_LOAD)
-			continue;
-
-		size = phdr->p_filesz;
-		if (size > phdr->p_memsz)
-			size = phdr->p_memsz;
-
-		kbuf.buffer = (void *) elf_info->buffer + phdr->p_offset;
-		kbuf.bufsz = size;
-		kbuf.buf_align = phdr->p_align;
-		kbuf.mem = phdr->p_paddr - old_pbase + new_pbase;
-		kbuf.memsz = phdr->p_memsz;
-		kbuf.top_down = false;
-		ret = kexec_add_buffer(&kbuf);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/*
- * Go through the available phsyical memory regions and find one that hold
- * an image of the specified size.
- */
-static int elf_find_pbase(struct kimage *image, unsigned long kernel_len,
-			  struct elfhdr *ehdr, struct kexec_elf_info *elf_info,
-			  unsigned long *old_pbase, unsigned long *new_pbase)
-{
-	int i;
-	int ret;
-	struct kexec_buf kbuf;
-	const struct elf_phdr *phdr;
-	unsigned long lowest_paddr = ULONG_MAX;
-	unsigned long lowest_vaddr = ULONG_MAX;
-
-	for (i = 0; i < ehdr->e_phnum; i++) {
-		phdr = &elf_info->proghdrs[i];
-		if (phdr->p_type != PT_LOAD)
-			continue;
-
-		if (lowest_paddr > phdr->p_paddr)
-			lowest_paddr = phdr->p_paddr;
-
-		if (lowest_vaddr > phdr->p_vaddr)
-			lowest_vaddr = phdr->p_vaddr;
-	}
-
-	kbuf.image = image;
-	kbuf.buf_min = lowest_paddr;
-	kbuf.buf_max = ULONG_MAX;
-
-	/*
-	 * Current riscv boot protocol requires 2MB alignment for
-	 * RV64 and 4MB alignment for RV32
-	 *
-	 */
-	kbuf.buf_align = PMD_SIZE;
-	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
-	kbuf.memsz = ALIGN(kernel_len, PAGE_SIZE);
-	kbuf.top_down = false;
-	ret = arch_kexec_locate_mem_hole(&kbuf);
-	if (!ret) {
-		*old_pbase = lowest_paddr;
-		*new_pbase = kbuf.mem;
-		image->start = ehdr->e_entry - lowest_vaddr + kbuf.mem;
-	}
-	return ret;
-}
-
-#ifdef CONFIG_CRASH_DUMP
-static int get_nr_ram_ranges_callback(struct resource *res, void *arg)
-{
-	unsigned int *nr_ranges = arg;
-
-	(*nr_ranges)++;
-	return 0;
-}
-
-static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
-{
-	struct crash_mem *cmem = arg;
-
-	cmem->ranges[cmem->nr_ranges].start = res->start;
-	cmem->ranges[cmem->nr_ranges].end = res->end;
-	cmem->nr_ranges++;
-
-	return 0;
-}
-
-static int prepare_elf_headers(void **addr, unsigned long *sz)
-{
-	struct crash_mem *cmem;
-	unsigned int nr_ranges;
-	int ret;
-
-	nr_ranges = 1; /* For exclusion of crashkernel region */
-	walk_system_ram_res(0, -1, &nr_ranges, get_nr_ram_ranges_callback);
-
-	cmem = kmalloc(struct_size(cmem, ranges, nr_ranges), GFP_KERNEL);
-	if (!cmem)
-		return -ENOMEM;
-
-	cmem->max_nr_ranges = nr_ranges;
-	cmem->nr_ranges = 0;
-	ret = walk_system_ram_res(0, -1, cmem, prepare_elf64_ram_headers_callback);
-	if (ret)
-		goto out;
-
-	/* Exclude crashkernel region */
-	ret = crash_exclude_mem_range(cmem, crashk_res.start, crashk_res.end);
-	if (!ret)
-		ret = crash_prepare_elf64_headers(cmem, true, addr, sz);
-
-out:
-	kfree(cmem);
-	return ret;
-}
-
-static char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
-				 unsigned long cmdline_len)
-{
-	int elfcorehdr_strlen;
-	char *cmdline_ptr;
-
-	cmdline_ptr = kzalloc(COMMAND_LINE_SIZE, GFP_KERNEL);
-	if (!cmdline_ptr)
-		return NULL;
-
-	elfcorehdr_strlen = sprintf(cmdline_ptr, "elfcorehdr=0x%lx ",
-		image->elf_load_addr);
-
-	if (elfcorehdr_strlen + cmdline_len > COMMAND_LINE_SIZE) {
-		pr_err("Appending elfcorehdr=<addr> exceeds cmdline size\n");
-		kfree(cmdline_ptr);
-		return NULL;
-	}
-
-	memcpy(cmdline_ptr + elfcorehdr_strlen, cmdline, cmdline_len);
-	/* Ensure it's nul terminated */
-	cmdline_ptr[COMMAND_LINE_SIZE - 1] = '\0';
-	return cmdline_ptr;
-}
-#endif
-
-static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
-			    unsigned long kernel_len, char *initrd,
-			    unsigned long initrd_len, char *cmdline,
-			    unsigned long cmdline_len)
-{
-	int ret;
-	void *fdt;
-	unsigned long old_kernel_pbase = ULONG_MAX;
-	unsigned long new_kernel_pbase = 0UL;
-	unsigned long initrd_pbase = 0UL;
-	unsigned long kernel_start;
-	struct elfhdr ehdr;
-	struct kexec_buf kbuf;
-	struct kexec_elf_info elf_info;
-	char *modified_cmdline = NULL;
-
-	ret = kexec_build_elf_info(kernel_buf, kernel_len, &ehdr, &elf_info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	ret = elf_find_pbase(image, kernel_len, &ehdr, &elf_info,
-			     &old_kernel_pbase, &new_kernel_pbase);
-	if (ret)
-		goto out;
-	kernel_start = image->start;
-
-	/* Add the kernel binary to the image */
-	ret = riscv_kexec_elf_load(image, &ehdr, &elf_info,
-				   old_kernel_pbase, new_kernel_pbase);
-	if (ret)
-		goto out;
-
-	kbuf.image = image;
-	kbuf.buf_min = new_kernel_pbase + kernel_len;
-	kbuf.buf_max = ULONG_MAX;
-
-#ifdef CONFIG_CRASH_DUMP
-	/* Add elfcorehdr */
-	if (image->type == KEXEC_TYPE_CRASH) {
-		void *headers;
-		unsigned long headers_sz;
-		ret = prepare_elf_headers(&headers, &headers_sz);
-		if (ret) {
-			pr_err("Preparing elf core header failed\n");
-			goto out;
-		}
-
-		kbuf.buffer = headers;
-		kbuf.bufsz = headers_sz;
-		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
-		kbuf.memsz = headers_sz;
-		kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
-		kbuf.top_down = true;
-
-		ret = kexec_add_buffer(&kbuf);
-		if (ret) {
-			vfree(headers);
-			goto out;
-		}
-		image->elf_headers = headers;
-		image->elf_load_addr = kbuf.mem;
-		image->elf_headers_sz = headers_sz;
-
-		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
-
-		/* Setup cmdline for kdump kernel case */
-		modified_cmdline = setup_kdump_cmdline(image, cmdline,
-						       cmdline_len);
-		if (!modified_cmdline) {
-			pr_err("Setting up cmdline for kdump kernel failed\n");
-			ret = -EINVAL;
-			goto out;
-		}
-		cmdline = modified_cmdline;
-	}
-#endif
-
-#ifdef CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY
-	/* Add purgatory to the image */
-	kbuf.top_down = true;
-	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
-	ret = kexec_load_purgatory(image, &kbuf);
-	if (ret) {
-		pr_err("Error loading purgatory ret=%d\n", ret);
-		goto out;
-	}
-	kexec_dprintk("Loaded purgatory at 0x%lx\n", kbuf.mem);
-
-	ret = kexec_purgatory_get_set_symbol(image, "riscv_kernel_entry",
-					     &kernel_start,
-					     sizeof(kernel_start), 0);
-	if (ret)
-		pr_err("Error update purgatory ret=%d\n", ret);
-#endif /* CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY */
-
-	/* Add the initrd to the image */
-	if (initrd != NULL) {
-		kbuf.buffer = initrd;
-		kbuf.bufsz = kbuf.memsz = initrd_len;
-		kbuf.buf_align = PAGE_SIZE;
-		kbuf.top_down = true;
-		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
-		ret = kexec_add_buffer(&kbuf);
-		if (ret)
-			goto out;
-		initrd_pbase = kbuf.mem;
-		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_pbase);
-	}
-
-	/* Add the DTB to the image */
-	fdt = of_kexec_alloc_and_setup_fdt(image, initrd_pbase,
-					   initrd_len, cmdline, 0);
-	if (!fdt) {
-		pr_err("Error setting up the new device tree.\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	fdt_pack(fdt);
-	kbuf.buffer = fdt;
-	kbuf.bufsz = kbuf.memsz = fdt_totalsize(fdt);
-	kbuf.buf_align = PAGE_SIZE;
-	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
-	kbuf.top_down = true;
-	ret = kexec_add_buffer(&kbuf);
-	if (ret) {
-		pr_err("Error add DTB kbuf ret=%d\n", ret);
-		goto out_free_fdt;
-	}
-	/* Cache the fdt buffer address for memory cleanup */
-	image->arch.fdt = fdt;
-	kexec_dprintk("Loaded device tree at 0x%lx\n", kbuf.mem);
-	goto out;
-
-out_free_fdt:
-	kvfree(fdt);
-out:
-	kfree(modified_cmdline);
-	kexec_free_elf_info(&elf_info);
-	return ret ? ERR_PTR(ret) : NULL;
-}
-
-#define RV_X(x, s, n)  (((x) >> (s)) & ((1 << (n)) - 1))
-#define RISCV_IMM_BITS 12
-#define RISCV_IMM_REACH (1LL << RISCV_IMM_BITS)
-#define RISCV_CONST_HIGH_PART(x) \
-	(((x) + (RISCV_IMM_REACH >> 1)) & ~(RISCV_IMM_REACH - 1))
-#define RISCV_CONST_LOW_PART(x) ((x) - RISCV_CONST_HIGH_PART(x))
-
-#define ENCODE_ITYPE_IMM(x) \
-	(RV_X(x, 0, 12) << 20)
-#define ENCODE_BTYPE_IMM(x) \
-	((RV_X(x, 1, 4) << 8) | (RV_X(x, 5, 6) << 25) | \
-	(RV_X(x, 11, 1) << 7) | (RV_X(x, 12, 1) << 31))
-#define ENCODE_UTYPE_IMM(x) \
-	(RV_X(x, 12, 20) << 12)
-#define ENCODE_JTYPE_IMM(x) \
-	((RV_X(x, 1, 10) << 21) | (RV_X(x, 11, 1) << 20) | \
-	(RV_X(x, 12, 8) << 12) | (RV_X(x, 20, 1) << 31))
-#define ENCODE_CBTYPE_IMM(x) \
-	((RV_X(x, 1, 2) << 3) | (RV_X(x, 3, 2) << 10) | (RV_X(x, 5, 1) << 2) | \
-	(RV_X(x, 6, 2) << 5) | (RV_X(x, 8, 1) << 12))
-#define ENCODE_CJTYPE_IMM(x) \
-	((RV_X(x, 1, 3) << 3) | (RV_X(x, 4, 1) << 11) | (RV_X(x, 5, 1) << 2) | \
-	(RV_X(x, 6, 1) << 7) | (RV_X(x, 7, 1) << 6) | (RV_X(x, 8, 2) << 9) | \
-	(RV_X(x, 10, 1) << 8) | (RV_X(x, 11, 1) << 12))
-#define ENCODE_UJTYPE_IMM(x) \
-	(ENCODE_UTYPE_IMM(RISCV_CONST_HIGH_PART(x)) | \
-	(ENCODE_ITYPE_IMM(RISCV_CONST_LOW_PART(x)) << 32))
-#define ENCODE_UITYPE_IMM(x) \
-	(ENCODE_UTYPE_IMM(x) | (ENCODE_ITYPE_IMM(x) << 32))
-
-#define CLEAN_IMM(type, x) \
-	((~ENCODE_##type##_IMM((uint64_t)(-1))) & (x))
-
-int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
-				     Elf_Shdr *section,
-				     const Elf_Shdr *relsec,
-				     const Elf_Shdr *symtab)
-{
-	const char *strtab, *name, *shstrtab;
-	const Elf_Shdr *sechdrs;
-	Elf64_Rela *relas;
-	int i, r_type;
-
-	/* String & section header string table */
-	sechdrs = (void *)pi->ehdr + pi->ehdr->e_shoff;
-	strtab = (char *)pi->ehdr + sechdrs[symtab->sh_link].sh_offset;
-	shstrtab = (char *)pi->ehdr + sechdrs[pi->ehdr->e_shstrndx].sh_offset;
-
-	relas = (void *)pi->ehdr + relsec->sh_offset;
-
-	for (i = 0; i < relsec->sh_size / sizeof(*relas); i++) {
-		const Elf_Sym *sym;	/* symbol to relocate */
-		unsigned long addr;	/* final location after relocation */
-		unsigned long val;	/* relocated symbol value */
-		unsigned long sec_base;	/* relocated symbol value */
-		void *loc;		/* tmp location to modify */
-
-		sym = (void *)pi->ehdr + symtab->sh_offset;
-		sym += ELF64_R_SYM(relas[i].r_info);
-
-		if (sym->st_name)
-			name = strtab + sym->st_name;
-		else
-			name = shstrtab + sechdrs[sym->st_shndx].sh_name;
-
-		loc = pi->purgatory_buf;
-		loc += section->sh_offset;
-		loc += relas[i].r_offset;
-
-		if (sym->st_shndx == SHN_ABS)
-			sec_base = 0;
-		else if (sym->st_shndx >= pi->ehdr->e_shnum) {
-			pr_err("Invalid section %d for symbol %s\n",
-			       sym->st_shndx, name);
-			return -ENOEXEC;
-		} else
-			sec_base = pi->sechdrs[sym->st_shndx].sh_addr;
-
-		val = sym->st_value;
-		val += sec_base;
-		val += relas[i].r_addend;
-
-		addr = section->sh_addr + relas[i].r_offset;
-
-		r_type = ELF64_R_TYPE(relas[i].r_info);
-
-		switch (r_type) {
-		case R_RISCV_BRANCH:
-			*(u32 *)loc = CLEAN_IMM(BTYPE, *(u32 *)loc) |
-				 ENCODE_BTYPE_IMM(val - addr);
-			break;
-		case R_RISCV_JAL:
-			*(u32 *)loc = CLEAN_IMM(JTYPE, *(u32 *)loc) |
-				 ENCODE_JTYPE_IMM(val - addr);
-			break;
-		/*
-		 * With no R_RISCV_PCREL_LO12_S, R_RISCV_PCREL_LO12_I
-		 * sym is expected to be next to R_RISCV_PCREL_HI20
-		 * in purgatory relsec. Handle it like R_RISCV_CALL
-		 * sym, instead of searching the whole relsec.
-		 */
-		case R_RISCV_PCREL_HI20:
-		case R_RISCV_CALL_PLT:
-		case R_RISCV_CALL:
-			*(u64 *)loc = CLEAN_IMM(UITYPE, *(u64 *)loc) |
-				 ENCODE_UJTYPE_IMM(val - addr);
-			break;
-		case R_RISCV_RVC_BRANCH:
-			*(u32 *)loc = CLEAN_IMM(CBTYPE, *(u32 *)loc) |
-				 ENCODE_CBTYPE_IMM(val - addr);
-			break;
-		case R_RISCV_RVC_JUMP:
-			*(u32 *)loc = CLEAN_IMM(CJTYPE, *(u32 *)loc) |
-				 ENCODE_CJTYPE_IMM(val - addr);
-			break;
-		case R_RISCV_ADD16:
-			*(u16 *)loc += val;
-			break;
-		case R_RISCV_SUB16:
-			*(u16 *)loc -= val;
-			break;
-		case R_RISCV_ADD32:
-			*(u32 *)loc += val;
-			break;
-		case R_RISCV_SUB32:
-			*(u32 *)loc -= val;
-			break;
-		/* It has been applied by R_RISCV_PCREL_HI20 sym */
-		case R_RISCV_PCREL_LO12_I:
-		case R_RISCV_ALIGN:
-		case R_RISCV_RELAX:
-			break;
-		case R_RISCV_64:
-			*(u64 *)loc = val;
-			break;
-		default:
-			pr_err("Unknown rela relocation: %d\n", r_type);
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-const struct kexec_file_ops elf_kexec_ops = {
-	.probe = kexec_elf_probe,
-	.load  = elf_kexec_load,
-};
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/entry.S linux-libre-6.16-gnu/arch/riscv/kernel/entry.S
index 33a5a9f2a0d4..75656afa2d6b 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/entry.S
+++ linux-libre-6.16-gnu/arch/riscv/kernel/entry.S
@@ -319,17 +319,21 @@ SYM_CODE_END(handle_kernel_stack_overflow)
 ASM_NOKPROBE(handle_kernel_stack_overflow)
 #endif
 
-SYM_CODE_START(ret_from_fork)
+SYM_CODE_START(ret_from_fork_kernel_asm)
+	call schedule_tail
+	move a0, s1 /* fn_arg */
+	move a1, s0 /* fn */
+	move a2, sp /* pt_regs */
+	call ret_from_fork_kernel
+	j ret_from_exception
+SYM_CODE_END(ret_from_fork_kernel_asm)
+
+SYM_CODE_START(ret_from_fork_user_asm)
 	call schedule_tail
-	beqz s0, 1f	/* not from kernel thread */
-	/* Call fn(arg) */
-	move a0, s1
-	jalr s0
-1:
 	move a0, sp /* pt_regs */
-	call syscall_exit_to_user_mode
+	call ret_from_fork_user
 	j ret_from_exception
-SYM_CODE_END(ret_from_fork)
+SYM_CODE_END(ret_from_fork_user_asm)
 
 #ifdef CONFIG_IRQ_STACKS
 /*
@@ -397,9 +401,18 @@ SYM_FUNC_START(__switch_to)
 	REG_S s9,  TASK_THREAD_S9_RA(a3)
 	REG_S s10, TASK_THREAD_S10_RA(a3)
 	REG_S s11, TASK_THREAD_S11_RA(a3)
+
+	/* save the user space access flag */
+	csrr  s0, CSR_STATUS
+	REG_S s0, TASK_THREAD_SUM_RA(a3)
+
 	/* Save the kernel shadow call stack pointer */
 	scs_save_current
 	/* Restore context from next->thread */
+	REG_L s0,  TASK_THREAD_SUM_RA(a4)
+	li    s1,  SR_SUM
+	and   s0,  s0, s1
+	csrs  CSR_STATUS, s0
 	REG_L ra,  TASK_THREAD_RA_RA(a4)
 	REG_L sp,  TASK_THREAD_SP_RA(a4)
 	REG_L s0,  TASK_THREAD_S0_RA(a4)
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/ftrace.c linux-libre-6.16-gnu/arch/riscv/kernel/ftrace.c
index 674dcdfae7a1..8d18d6727f0f 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/ftrace.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/ftrace.c
@@ -8,98 +8,139 @@
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
 #include <linux/memory.h>
+#include <linux/irqflags.h>
 #include <linux/stop_machine.h>
 #include <asm/cacheflush.h>
 #include <asm/text-patching.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-void ftrace_arch_code_modify_prepare(void) __acquires(&text_mutex)
+void ftrace_arch_code_modify_prepare(void)
+	__acquires(&text_mutex)
 {
 	mutex_lock(&text_mutex);
-
-	/*
-	 * The code sequences we use for ftrace can't be patched while the
-	 * kernel is running, so we need to use stop_machine() to modify them
-	 * for now.  This doesn't play nice with text_mutex, we use this flag
-	 * to elide the check.
-	 */
-	riscv_patch_in_stop_machine = true;
 }
 
-void ftrace_arch_code_modify_post_process(void) __releases(&text_mutex)
+void ftrace_arch_code_modify_post_process(void)
+	__releases(&text_mutex)
 {
-	riscv_patch_in_stop_machine = false;
 	mutex_unlock(&text_mutex);
 }
 
-static int ftrace_check_current_call(unsigned long hook_pos,
-				     unsigned int *expected)
+unsigned long ftrace_call_adjust(unsigned long addr)
 {
-	unsigned int replaced[2];
-	unsigned int nops[2] = {RISCV_INSN_NOP4, RISCV_INSN_NOP4};
+	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS))
+		return addr + 8 + MCOUNT_AUIPC_SIZE;
 
-	/* we expect nops at the hook position */
-	if (!expected)
-		expected = nops;
+	return addr + MCOUNT_AUIPC_SIZE;
+}
 
-	/*
-	 * Read the text we want to modify;
-	 * return must be -EFAULT on read error
-	 */
-	if (copy_from_kernel_nofault(replaced, (void *)hook_pos,
-			MCOUNT_INSN_SIZE))
-		return -EFAULT;
+unsigned long arch_ftrace_get_symaddr(unsigned long fentry_ip)
+{
+	return fentry_ip - MCOUNT_AUIPC_SIZE;
+}
 
-	/*
-	 * Make sure it is what we expect it to be;
-	 * return must be -EINVAL on failed comparison
-	 */
-	if (memcmp(expected, replaced, sizeof(replaced))) {
-		pr_err("%p: expected (%08x %08x) but got (%08x %08x)\n",
-		       (void *)hook_pos, expected[0], expected[1], replaced[0],
-		       replaced[1]);
-		return -EINVAL;
+void arch_ftrace_update_code(int command)
+{
+	command |= FTRACE_MAY_SLEEP;
+	ftrace_modify_all_code(command);
+	flush_icache_all();
+}
+
+static int __ftrace_modify_call(unsigned long source, unsigned long target, bool validate)
+{
+	unsigned int call[2], offset;
+	unsigned int replaced[2];
+
+	offset = target - source;
+	call[1] = to_jalr_t0(offset);
+
+	if (validate) {
+		call[0] = to_auipc_t0(offset);
+		/*
+		 * Read the text we want to modify;
+		 * return must be -EFAULT on read error
+		 */
+		if (copy_from_kernel_nofault(replaced, (void *)source, 2 * MCOUNT_INSN_SIZE))
+			return -EFAULT;
+
+		if (replaced[0] != call[0]) {
+			pr_err("%p: expected (%08x) but got (%08x)\n",
+			       (void *)source, call[0], replaced[0]);
+			return -EINVAL;
+		}
 	}
 
+	/* Replace the jalr at once. Return -EPERM on write error. */
+	if (patch_insn_write((void *)(source + MCOUNT_AUIPC_SIZE), call + 1, MCOUNT_JALR_SIZE))
+		return -EPERM;
+
 	return 0;
 }
 
-static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
-				bool enable, bool ra)
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+static const struct ftrace_ops *riscv64_rec_get_ops(struct dyn_ftrace *rec)
 {
-	unsigned int call[2];
-	unsigned int nops[2] = {RISCV_INSN_NOP4, RISCV_INSN_NOP4};
+	const struct ftrace_ops *ops = NULL;
 
-	if (ra)
-		make_call_ra(hook_pos, target, call);
-	else
-		make_call_t0(hook_pos, target, call);
+	if (rec->flags & FTRACE_FL_CALL_OPS_EN) {
+		ops = ftrace_find_unique_ops(rec);
+		WARN_ON_ONCE(!ops);
+	}
 
-	/* Replace the auipc-jalr pair at once. Return -EPERM on write error. */
-	if (patch_insn_write((void *)hook_pos, enable ? call : nops, MCOUNT_INSN_SIZE))
-		return -EPERM;
+	if (!ops)
+		ops = &ftrace_list_ops;
 
-	return 0;
+	return ops;
+}
+
+static int ftrace_rec_set_ops(const struct dyn_ftrace *rec, const struct ftrace_ops *ops)
+{
+	unsigned long literal = ALIGN_DOWN(rec->ip - 12, 8);
+
+	return patch_text_nosync((void *)literal, &ops, sizeof(ops));
 }
 
+static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec)
+{
+	return ftrace_rec_set_ops(rec, &ftrace_nop_ops);
+}
+
+static int ftrace_rec_update_ops(struct dyn_ftrace *rec)
+{
+	return ftrace_rec_set_ops(rec, riscv64_rec_get_ops(rec));
+}
+#else
+static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) { return 0; }
+static int ftrace_rec_update_ops(struct dyn_ftrace *rec) { return 0; }
+#endif
+
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
-	unsigned int call[2];
+	unsigned long distance, orig_addr, pc = rec->ip - MCOUNT_AUIPC_SIZE;
+	int ret;
 
-	make_call_t0(rec->ip, addr, call);
+	ret = ftrace_rec_update_ops(rec);
+	if (ret)
+		return ret;
 
-	if (patch_insn_write((void *)rec->ip, call, MCOUNT_INSN_SIZE))
-		return -EPERM;
+	orig_addr = (unsigned long)&ftrace_caller;
+	distance = addr > orig_addr ? addr - orig_addr : orig_addr - addr;
+	if (distance > JALR_RANGE)
+		addr = FTRACE_ADDR;
 
-	return 0;
+	return __ftrace_modify_call(pc, addr, false);
 }
 
-int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
-		    unsigned long addr)
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
 {
-	unsigned int nops[2] = {RISCV_INSN_NOP4, RISCV_INSN_NOP4};
+	u32 nop4 = RISCV_INSN_NOP4;
+	int ret;
+
+	ret = ftrace_rec_set_nop_ops(rec);
+	if (ret)
+		return ret;
 
-	if (patch_insn_write((void *)rec->ip, nops, MCOUNT_INSN_SIZE))
+	if (patch_insn_write((void *)rec->ip, &nop4, MCOUNT_NOP4_SIZE))
 		return -EPERM;
 
 	return 0;
@@ -114,75 +155,71 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
  */
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
 {
-	int out;
+	unsigned long pc = rec->ip - MCOUNT_AUIPC_SIZE;
+	unsigned int nops[2], offset;
+	int ret;
 
-	mutex_lock(&text_mutex);
-	out = ftrace_make_nop(mod, rec, MCOUNT_ADDR);
-	mutex_unlock(&text_mutex);
+	guard(mutex)(&text_mutex);
 
-	return out;
-}
+	ret = ftrace_rec_set_nop_ops(rec);
+	if (ret)
+		return ret;
 
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
-	int ret = __ftrace_modify_call((unsigned long)&ftrace_call,
-				       (unsigned long)func, true, true);
+	offset = (unsigned long) &ftrace_caller - pc;
+	nops[0] = to_auipc_t0(offset);
+	nops[1] = RISCV_INSN_NOP4;
+
+	ret = patch_insn_write((void *)pc, nops, 2 * MCOUNT_INSN_SIZE);
 
 	return ret;
 }
 
-struct ftrace_modify_param {
-	int command;
-	atomic_t cpu_count;
-};
-
-static int __ftrace_modify_code(void *data)
+ftrace_func_t ftrace_call_dest = ftrace_stub;
+int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	struct ftrace_modify_param *param = data;
-
-	if (atomic_inc_return(&param->cpu_count) == num_online_cpus()) {
-		ftrace_modify_all_code(param->command);
-		/*
-		 * Make sure the patching store is effective *before* we
-		 * increment the counter which releases all waiting CPUs
-		 * by using the release variant of atomic increment. The
-		 * release pairs with the call to local_flush_icache_all()
-		 * on the waiting CPU.
-		 */
-		atomic_inc_return_release(&param->cpu_count);
-	} else {
-		while (atomic_read(&param->cpu_count) <= num_online_cpus())
-			cpu_relax();
-
-		local_flush_icache_all();
-	}
+	/*
+	 * When using CALL_OPS, the function to call is associated with the
+	 * call site, and we don't have a global function pointer to update.
+	 */
+	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS))
+		return 0;
 
+	WRITE_ONCE(ftrace_call_dest, func);
+	/*
+	 * The data fence ensure that the update to ftrace_call_dest happens
+	 * before the write to function_trace_op later in the generic ftrace.
+	 * If the sequence is not enforced, then an old ftrace_call_dest may
+	 * race loading a new function_trace_op set in ftrace_modify_all_code
+	 */
+	smp_wmb();
+	/*
+	 * Updating ftrace dpes not take stop_machine path, so irqs should not
+	 * be disabled.
+	 */
+	WARN_ON(irqs_disabled());
+	smp_call_function(ftrace_sync_ipi, NULL, 1);
 	return 0;
 }
 
-void arch_ftrace_update_code(int command)
+#else /* CONFIG_DYNAMIC_FTRACE */
+unsigned long ftrace_call_adjust(unsigned long addr)
 {
-	struct ftrace_modify_param param = { command, ATOMIC_INIT(0) };
-
-	stop_machine(__ftrace_modify_code, &param, cpu_online_mask);
+	return addr;
 }
-#endif
+#endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 		       unsigned long addr)
 {
-	unsigned int call[2];
-	unsigned long caller = rec->ip;
+	unsigned long caller = rec->ip - MCOUNT_AUIPC_SIZE;
 	int ret;
 
-	make_call_t0(caller, old_addr, call);
-	ret = ftrace_check_current_call(caller, call);
-
+	ret = ftrace_rec_update_ops(rec);
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call(caller, addr, true, false);
+	return __ftrace_modify_call(caller, FTRACE_ADDR, true);
 }
 #endif
 
@@ -210,7 +247,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs)
 {
@@ -231,19 +267,5 @@ void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 	if (!function_graph_enter_regs(old, ip, frame_pointer, parent, fregs))
 		*parent = return_hooker;
 }
-#else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
-extern void ftrace_graph_call(void);
-int ftrace_enable_ftrace_graph_caller(void)
-{
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, true, true);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
-				    (unsigned long)&prepare_ftrace_return, false, true);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/head.S linux-libre-6.16-gnu/arch/riscv/kernel/head.S
index 356d5397b2a2..bdf3352acf4c 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/head.S
+++ linux-libre-6.16-gnu/arch/riscv/kernel/head.S
@@ -131,6 +131,12 @@ secondary_start_sbi:
 	csrw CSR_IE, zero
 	csrw CSR_IP, zero
 
+#ifndef CONFIG_RISCV_M_MODE
+	/* Enable time CSR */
+	li t0, 0x2
+	csrw CSR_SCOUNTEREN, t0
+#endif
+
 	/* Load the global pointer */
 	load_global_pointer
 
@@ -226,6 +232,10 @@ SYM_CODE_START(_start_kernel)
 	 * to hand it to us.
 	 */
 	csrr a0, CSR_MHARTID
+#else
+	/* Enable time CSR */
+	li t0, 0x2
+	csrw CSR_SCOUNTEREN, t0
 #endif /* CONFIG_RISCV_M_MODE */
 
 	/* Load the global pointer */
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/kexec_elf.c linux-libre-6.16-gnu/arch/riscv/kernel/kexec_elf.c
new file mode 100644
index 000000000000..f4755d49b89e
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/kexec_elf.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Load ELF vmlinux file for the kexec_file_load syscall.
+ *
+ * Copyright (C) 2021 Huawei Technologies Co, Ltd.
+ *
+ * Author: Liao Chang (liaochang1@huawei.com)
+ *
+ * Based on kexec-tools' kexec-elf-riscv.c, heavily modified
+ * for kernel.
+ */
+
+#define pr_fmt(fmt)	"kexec_image: " fmt
+
+#include <linux/elf.h>
+#include <linux/kexec.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/libfdt.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <asm/setup.h>
+
+static int riscv_kexec_elf_load(struct kimage *image, struct elfhdr *ehdr,
+				struct kexec_elf_info *elf_info, unsigned long old_pbase,
+				unsigned long new_pbase)
+{
+	int i;
+	int ret = 0;
+	size_t size;
+	struct kexec_buf kbuf;
+	const struct elf_phdr *phdr;
+
+	kbuf.image = image;
+
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		phdr = &elf_info->proghdrs[i];
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		size = phdr->p_filesz;
+		if (size > phdr->p_memsz)
+			size = phdr->p_memsz;
+
+		kbuf.buffer = (void *) elf_info->buffer + phdr->p_offset;
+		kbuf.bufsz = size;
+		kbuf.buf_align = phdr->p_align;
+		kbuf.mem = phdr->p_paddr - old_pbase + new_pbase;
+		kbuf.memsz = phdr->p_memsz;
+		kbuf.top_down = false;
+		ret = kexec_add_buffer(&kbuf);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+ * Go through the available phsyical memory regions and find one that hold
+ * an image of the specified size.
+ */
+static int elf_find_pbase(struct kimage *image, unsigned long kernel_len,
+			  struct elfhdr *ehdr, struct kexec_elf_info *elf_info,
+			  unsigned long *old_pbase, unsigned long *new_pbase)
+{
+	int i;
+	int ret;
+	struct kexec_buf kbuf;
+	const struct elf_phdr *phdr;
+	unsigned long lowest_paddr = ULONG_MAX;
+	unsigned long lowest_vaddr = ULONG_MAX;
+
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		phdr = &elf_info->proghdrs[i];
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		if (lowest_paddr > phdr->p_paddr)
+			lowest_paddr = phdr->p_paddr;
+
+		if (lowest_vaddr > phdr->p_vaddr)
+			lowest_vaddr = phdr->p_vaddr;
+	}
+
+	kbuf.image = image;
+	kbuf.buf_min = lowest_paddr;
+	kbuf.buf_max = ULONG_MAX;
+
+	/*
+	 * Current riscv boot protocol requires 2MB alignment for
+	 * RV64 and 4MB alignment for RV32
+	 *
+	 */
+	kbuf.buf_align = PMD_SIZE;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.memsz = ALIGN(kernel_len, PAGE_SIZE);
+	kbuf.top_down = false;
+	ret = arch_kexec_locate_mem_hole(&kbuf);
+	if (!ret) {
+		*old_pbase = lowest_paddr;
+		*new_pbase = kbuf.mem;
+		image->start = ehdr->e_entry - lowest_vaddr + kbuf.mem;
+	}
+	return ret;
+}
+
+static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
+			    unsigned long kernel_len, char *initrd,
+			    unsigned long initrd_len, char *cmdline,
+			    unsigned long cmdline_len)
+{
+	int ret;
+	unsigned long old_kernel_pbase = ULONG_MAX;
+	unsigned long new_kernel_pbase = 0UL;
+	struct elfhdr ehdr;
+	struct kexec_elf_info elf_info;
+
+	ret = kexec_build_elf_info(kernel_buf, kernel_len, &ehdr, &elf_info);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = elf_find_pbase(image, kernel_len, &ehdr, &elf_info,
+			     &old_kernel_pbase, &new_kernel_pbase);
+	if (ret)
+		goto out;
+
+	/* Add the kernel binary to the image */
+	ret = riscv_kexec_elf_load(image, &ehdr, &elf_info,
+				   old_kernel_pbase, new_kernel_pbase);
+	if (ret)
+		goto out;
+
+	ret = load_extra_segments(image, image->start, kernel_len,
+				  initrd, initrd_len, cmdline, cmdline_len);
+out:
+	kexec_free_elf_info(&elf_info);
+	return ret ? ERR_PTR(ret) : NULL;
+}
+
+const struct kexec_file_ops elf_kexec_ops = {
+	.probe = kexec_elf_probe,
+	.load  = elf_kexec_load,
+};
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/kexec_image.c linux-libre-6.16-gnu/arch/riscv/kernel/kexec_image.c
new file mode 100644
index 000000000000..26a81774a78a
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/kexec_image.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V Kexec image loader
+ *
+ */
+
+#define pr_fmt(fmt)	"kexec_file(Image): " fmt
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/pe.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+#include <asm/image.h>
+
+static int image_probe(const char *kernel_buf, unsigned long kernel_len)
+{
+	const struct riscv_image_header *h = (const struct riscv_image_header *)kernel_buf;
+
+	if (!h || kernel_len < sizeof(*h))
+		return -EINVAL;
+
+	/* According to Documentation/riscv/boot-image-header.rst,
+	 * use "magic2" field to check when version >= 0.2.
+	 */
+
+	if (h->version >= RISCV_HEADER_VERSION &&
+	    memcmp(&h->magic2, RISCV_IMAGE_MAGIC2, sizeof(h->magic2)))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void *image_load(struct kimage *image,
+			char *kernel, unsigned long kernel_len,
+			char *initrd, unsigned long initrd_len,
+			char *cmdline, unsigned long cmdline_len)
+{
+	struct riscv_image_header *h;
+	u64 flags;
+	bool be_image, be_kernel;
+	struct kexec_buf kbuf;
+	int ret;
+
+	/* Check Image header */
+	h = (struct riscv_image_header *)kernel;
+	if (!h->image_size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Check endianness */
+	flags = le64_to_cpu(h->flags);
+	be_image = riscv_image_flag_field(flags, RISCV_IMAGE_FLAG_BE);
+	be_kernel = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+	if (be_image != be_kernel) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Load the kernel image */
+	kbuf.image = image;
+	kbuf.buf_min = 0;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = false;
+
+	kbuf.buffer = kernel;
+	kbuf.bufsz = kernel_len;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.memsz = le64_to_cpu(h->image_size);
+	kbuf.buf_align = le64_to_cpu(h->text_offset);
+
+	ret = kexec_add_buffer(&kbuf);
+	if (ret) {
+		pr_err("Error add kernel image ret=%d\n", ret);
+		goto out;
+	}
+
+	image->start = kbuf.mem;
+
+	pr_info("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		kbuf.mem, kbuf.bufsz, kbuf.memsz);
+
+	ret = load_extra_segments(image, kbuf.mem, kbuf.memsz,
+				  initrd, initrd_len, cmdline, cmdline_len);
+
+out:
+	return ret ? ERR_PTR(ret) : NULL;
+}
+
+const struct kexec_file_ops image_kexec_ops = {
+	.probe = image_probe,
+	.load = image_load,
+};
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/machine_kexec_file.c linux-libre-6.16-gnu/arch/riscv/kernel/machine_kexec_file.c
index b0bf8c1722c0..e36104af2e24 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/machine_kexec_file.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/machine_kexec_file.c
@@ -7,8 +7,369 @@
  * Author: Liao Chang (liaochang1@huawei.com)
  */
 #include <linux/kexec.h>
+#include <linux/elf.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/libfdt.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <linux/vmalloc.h>
+#include <asm/setup.h>
 
 const struct kexec_file_ops * const kexec_file_loaders[] = {
 	&elf_kexec_ops,
+	&image_kexec_ops,
 	NULL
 };
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+	kvfree(image->arch.fdt);
+	image->arch.fdt = NULL;
+
+	vfree(image->elf_headers);
+	image->elf_headers = NULL;
+	image->elf_headers_sz = 0;
+
+	return kexec_image_post_load_cleanup_default(image);
+}
+
+#ifdef CONFIG_CRASH_DUMP
+static int get_nr_ram_ranges_callback(struct resource *res, void *arg)
+{
+	unsigned int *nr_ranges = arg;
+
+	(*nr_ranges)++;
+	return 0;
+}
+
+static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
+{
+	struct crash_mem *cmem = arg;
+
+	cmem->ranges[cmem->nr_ranges].start = res->start;
+	cmem->ranges[cmem->nr_ranges].end = res->end;
+	cmem->nr_ranges++;
+
+	return 0;
+}
+
+static int prepare_elf_headers(void **addr, unsigned long *sz)
+{
+	struct crash_mem *cmem;
+	unsigned int nr_ranges;
+	int ret;
+
+	nr_ranges = 1; /* For exclusion of crashkernel region */
+	walk_system_ram_res(0, -1, &nr_ranges, get_nr_ram_ranges_callback);
+
+	cmem = kmalloc(struct_size(cmem, ranges, nr_ranges), GFP_KERNEL);
+	if (!cmem)
+		return -ENOMEM;
+
+	cmem->max_nr_ranges = nr_ranges;
+	cmem->nr_ranges = 0;
+	ret = walk_system_ram_res(0, -1, cmem, prepare_elf64_ram_headers_callback);
+	if (ret)
+		goto out;
+
+	/* Exclude crashkernel region */
+	ret = crash_exclude_mem_range(cmem, crashk_res.start, crashk_res.end);
+	if (!ret)
+		ret = crash_prepare_elf64_headers(cmem, true, addr, sz);
+
+out:
+	kfree(cmem);
+	return ret;
+}
+
+static char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
+				 unsigned long cmdline_len)
+{
+	int elfcorehdr_strlen;
+	char *cmdline_ptr;
+
+	cmdline_ptr = kzalloc(COMMAND_LINE_SIZE, GFP_KERNEL);
+	if (!cmdline_ptr)
+		return NULL;
+
+	elfcorehdr_strlen = sprintf(cmdline_ptr, "elfcorehdr=0x%lx ",
+		image->elf_load_addr);
+
+	if (elfcorehdr_strlen + cmdline_len > COMMAND_LINE_SIZE) {
+		pr_err("Appending elfcorehdr=<addr> exceeds cmdline size\n");
+		kfree(cmdline_ptr);
+		return NULL;
+	}
+
+	memcpy(cmdline_ptr + elfcorehdr_strlen, cmdline, cmdline_len);
+	/* Ensure it's nul terminated */
+	cmdline_ptr[COMMAND_LINE_SIZE - 1] = '\0';
+	return cmdline_ptr;
+}
+#endif
+
+#define RV_X(x, s, n)  (((x) >> (s)) & ((1 << (n)) - 1))
+#define RISCV_IMM_BITS 12
+#define RISCV_IMM_REACH (1LL << RISCV_IMM_BITS)
+#define RISCV_CONST_HIGH_PART(x) \
+	(((x) + (RISCV_IMM_REACH >> 1)) & ~(RISCV_IMM_REACH - 1))
+#define RISCV_CONST_LOW_PART(x) ((x) - RISCV_CONST_HIGH_PART(x))
+
+#define ENCODE_ITYPE_IMM(x) \
+	(RV_X(x, 0, 12) << 20)
+#define ENCODE_BTYPE_IMM(x) \
+	((RV_X(x, 1, 4) << 8) | (RV_X(x, 5, 6) << 25) | \
+	(RV_X(x, 11, 1) << 7) | (RV_X(x, 12, 1) << 31))
+#define ENCODE_UTYPE_IMM(x) \
+	(RV_X(x, 12, 20) << 12)
+#define ENCODE_JTYPE_IMM(x) \
+	((RV_X(x, 1, 10) << 21) | (RV_X(x, 11, 1) << 20) | \
+	(RV_X(x, 12, 8) << 12) | (RV_X(x, 20, 1) << 31))
+#define ENCODE_CBTYPE_IMM(x) \
+	((RV_X(x, 1, 2) << 3) | (RV_X(x, 3, 2) << 10) | (RV_X(x, 5, 1) << 2) | \
+	(RV_X(x, 6, 2) << 5) | (RV_X(x, 8, 1) << 12))
+#define ENCODE_CJTYPE_IMM(x) \
+	((RV_X(x, 1, 3) << 3) | (RV_X(x, 4, 1) << 11) | (RV_X(x, 5, 1) << 2) | \
+	(RV_X(x, 6, 1) << 7) | (RV_X(x, 7, 1) << 6) | (RV_X(x, 8, 2) << 9) | \
+	(RV_X(x, 10, 1) << 8) | (RV_X(x, 11, 1) << 12))
+#define ENCODE_UJTYPE_IMM(x) \
+	(ENCODE_UTYPE_IMM(RISCV_CONST_HIGH_PART(x)) | \
+	(ENCODE_ITYPE_IMM(RISCV_CONST_LOW_PART(x)) << 32))
+#define ENCODE_UITYPE_IMM(x) \
+	(ENCODE_UTYPE_IMM(x) | (ENCODE_ITYPE_IMM(x) << 32))
+
+#define CLEAN_IMM(type, x) \
+	((~ENCODE_##type##_IMM((uint64_t)(-1))) & (x))
+
+int arch_kexec_apply_relocations_add(struct purgatory_info *pi,
+				     Elf_Shdr *section,
+				     const Elf_Shdr *relsec,
+				     const Elf_Shdr *symtab)
+{
+	const char *strtab, *name, *shstrtab;
+	const Elf_Shdr *sechdrs;
+	Elf64_Rela *relas;
+	int i, r_type;
+
+	/* String & section header string table */
+	sechdrs = (void *)pi->ehdr + pi->ehdr->e_shoff;
+	strtab = (char *)pi->ehdr + sechdrs[symtab->sh_link].sh_offset;
+	shstrtab = (char *)pi->ehdr + sechdrs[pi->ehdr->e_shstrndx].sh_offset;
+
+	relas = (void *)pi->ehdr + relsec->sh_offset;
+
+	for (i = 0; i < relsec->sh_size / sizeof(*relas); i++) {
+		const Elf_Sym *sym;	/* symbol to relocate */
+		unsigned long addr;	/* final location after relocation */
+		unsigned long val;	/* relocated symbol value */
+		unsigned long sec_base;	/* relocated symbol value */
+		void *loc;		/* tmp location to modify */
+
+		sym = (void *)pi->ehdr + symtab->sh_offset;
+		sym += ELF64_R_SYM(relas[i].r_info);
+
+		if (sym->st_name)
+			name = strtab + sym->st_name;
+		else
+			name = shstrtab + sechdrs[sym->st_shndx].sh_name;
+
+		loc = pi->purgatory_buf;
+		loc += section->sh_offset;
+		loc += relas[i].r_offset;
+
+		if (sym->st_shndx == SHN_ABS)
+			sec_base = 0;
+		else if (sym->st_shndx >= pi->ehdr->e_shnum) {
+			pr_err("Invalid section %d for symbol %s\n",
+			       sym->st_shndx, name);
+			return -ENOEXEC;
+		} else
+			sec_base = pi->sechdrs[sym->st_shndx].sh_addr;
+
+		val = sym->st_value;
+		val += sec_base;
+		val += relas[i].r_addend;
+
+		addr = section->sh_addr + relas[i].r_offset;
+
+		r_type = ELF64_R_TYPE(relas[i].r_info);
+
+		switch (r_type) {
+		case R_RISCV_BRANCH:
+			*(u32 *)loc = CLEAN_IMM(BTYPE, *(u32 *)loc) |
+				 ENCODE_BTYPE_IMM(val - addr);
+			break;
+		case R_RISCV_JAL:
+			*(u32 *)loc = CLEAN_IMM(JTYPE, *(u32 *)loc) |
+				 ENCODE_JTYPE_IMM(val - addr);
+			break;
+		/*
+		 * With no R_RISCV_PCREL_LO12_S, R_RISCV_PCREL_LO12_I
+		 * sym is expected to be next to R_RISCV_PCREL_HI20
+		 * in purgatory relsec. Handle it like R_RISCV_CALL
+		 * sym, instead of searching the whole relsec.
+		 */
+		case R_RISCV_PCREL_HI20:
+		case R_RISCV_CALL_PLT:
+		case R_RISCV_CALL:
+			*(u64 *)loc = CLEAN_IMM(UITYPE, *(u64 *)loc) |
+				 ENCODE_UJTYPE_IMM(val - addr);
+			break;
+		case R_RISCV_RVC_BRANCH:
+			*(u32 *)loc = CLEAN_IMM(CBTYPE, *(u32 *)loc) |
+				 ENCODE_CBTYPE_IMM(val - addr);
+			break;
+		case R_RISCV_RVC_JUMP:
+			*(u32 *)loc = CLEAN_IMM(CJTYPE, *(u32 *)loc) |
+				 ENCODE_CJTYPE_IMM(val - addr);
+			break;
+		case R_RISCV_ADD16:
+			*(u16 *)loc += val;
+			break;
+		case R_RISCV_SUB16:
+			*(u16 *)loc -= val;
+			break;
+		case R_RISCV_ADD32:
+			*(u32 *)loc += val;
+			break;
+		case R_RISCV_SUB32:
+			*(u32 *)loc -= val;
+			break;
+		/* It has been applied by R_RISCV_PCREL_HI20 sym */
+		case R_RISCV_PCREL_LO12_I:
+		case R_RISCV_ALIGN:
+		case R_RISCV_RELAX:
+			break;
+		case R_RISCV_64:
+			*(u64 *)loc = val;
+			break;
+		default:
+			pr_err("Unknown rela relocation: %d\n", r_type);
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+
+int load_extra_segments(struct kimage *image, unsigned long kernel_start,
+			    unsigned long kernel_len, char *initrd,
+			    unsigned long initrd_len, char *cmdline,
+			    unsigned long cmdline_len)
+{
+	int ret;
+	void *fdt;
+	unsigned long initrd_pbase = 0UL;
+	struct kexec_buf kbuf;
+	char *modified_cmdline = NULL;
+
+	kbuf.image = image;
+	kbuf.buf_min = kernel_start + kernel_len;
+	kbuf.buf_max = ULONG_MAX;
+
+#ifdef CONFIG_CRASH_DUMP
+	/* Add elfcorehdr */
+	if (image->type == KEXEC_TYPE_CRASH) {
+		void *headers;
+		unsigned long headers_sz;
+		ret = prepare_elf_headers(&headers, &headers_sz);
+		if (ret) {
+			pr_err("Preparing elf core header failed\n");
+			goto out;
+		}
+
+		kbuf.buffer = headers;
+		kbuf.bufsz = headers_sz;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		kbuf.memsz = headers_sz;
+		kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
+		kbuf.top_down = true;
+
+		ret = kexec_add_buffer(&kbuf);
+		if (ret) {
+			vfree(headers);
+			goto out;
+		}
+		image->elf_headers = headers;
+		image->elf_load_addr = kbuf.mem;
+		image->elf_headers_sz = headers_sz;
+
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+
+		/* Setup cmdline for kdump kernel case */
+		modified_cmdline = setup_kdump_cmdline(image, cmdline,
+						       cmdline_len);
+		if (!modified_cmdline) {
+			pr_err("Setting up cmdline for kdump kernel failed\n");
+			ret = -EINVAL;
+			goto out;
+		}
+		cmdline = modified_cmdline;
+	}
+#endif
+
+#ifdef CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY
+	/* Add purgatory to the image */
+	kbuf.top_down = true;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	ret = kexec_load_purgatory(image, &kbuf);
+	if (ret) {
+		pr_err("Error loading purgatory ret=%d\n", ret);
+		goto out;
+	}
+	kexec_dprintk("Loaded purgatory at 0x%lx\n", kbuf.mem);
+
+	ret = kexec_purgatory_get_set_symbol(image, "riscv_kernel_entry",
+					     &kernel_start,
+					     sizeof(kernel_start), 0);
+	if (ret)
+		pr_err("Error update purgatory ret=%d\n", ret);
+#endif /* CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY */
+
+	/* Add the initrd to the image */
+	if (initrd != NULL) {
+		kbuf.buffer = initrd;
+		kbuf.bufsz = kbuf.memsz = initrd_len;
+		kbuf.buf_align = PAGE_SIZE;
+		kbuf.top_down = true;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		ret = kexec_add_buffer(&kbuf);
+		if (ret)
+			goto out;
+		initrd_pbase = kbuf.mem;
+		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_pbase);
+	}
+
+	/* Add the DTB to the image */
+	fdt = of_kexec_alloc_and_setup_fdt(image, initrd_pbase,
+					   initrd_len, cmdline, 0);
+	if (!fdt) {
+		pr_err("Error setting up the new device tree.\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	fdt_pack(fdt);
+	kbuf.buffer = fdt;
+	kbuf.bufsz = kbuf.memsz = fdt_totalsize(fdt);
+	kbuf.buf_align = PAGE_SIZE;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.top_down = true;
+	ret = kexec_add_buffer(&kbuf);
+	if (ret) {
+		pr_err("Error add DTB kbuf ret=%d\n", ret);
+		goto out_free_fdt;
+	}
+	/* Cache the fdt buffer address for memory cleanup */
+	image->arch.fdt = fdt;
+	kexec_dprintk("Loaded device tree at 0x%lx\n", kbuf.mem);
+	goto out;
+
+out_free_fdt:
+	kvfree(fdt);
+out:
+	kfree(modified_cmdline);
+	return ret;
+}
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/mcount-dyn.S linux-libre-6.16-gnu/arch/riscv/kernel/mcount-dyn.S
index 745dd4c4a69c..48f6c4f7dca0 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/mcount-dyn.S
+++ linux-libre-6.16-gnu/arch/riscv/kernel/mcount-dyn.S
@@ -13,7 +13,6 @@
 
 	.text
 
-#define FENTRY_RA_OFFSET	8
 #define ABI_SIZE_ON_STACK	80
 #define ABI_A0			0
 #define ABI_A1			8
@@ -56,16 +55,13 @@
 	addi	sp, sp, ABI_SIZE_ON_STACK
 	.endm
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
-
 /**
 * SAVE_ABI_REGS - save regs against the ftrace_regs struct
 *
 * After the stack is established,
 *
 * 0(sp) stores the PC of the traced function which can be accessed
-* by &(fregs)->epc in tracing function. Note that the real
-* function entry address should be computed with -FENTRY_RA_OFFSET.
+* by &(fregs)->epc in tracing function.
 *
 * 8(sp) stores the function return address (i.e. parent IP) that
 * can be accessed by &(fregs)->ra in tracing function.
@@ -86,17 +82,20 @@
 *                       +++++++++
 **/
 	.macro SAVE_ABI_REGS
-	mv	t4, sp			// Save original SP in T4
 	addi	sp, sp, -FREGS_SIZE_ON_STACK
-
 	REG_S	t0,  FREGS_EPC(sp)
 	REG_S	x1,  FREGS_RA(sp)
-	REG_S	t4,  FREGS_SP(sp)	// Put original SP on stack
 #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
 	REG_S	x8,  FREGS_S0(sp)
 #endif
 	REG_S	x6,  FREGS_T1(sp)
-
+#ifdef CONFIG_CC_IS_CLANG
+	REG_S	x7,  FREGS_T2(sp)
+	REG_S	x28, FREGS_T3(sp)
+	REG_S	x29, FREGS_T4(sp)
+	REG_S	x30, FREGS_T5(sp)
+	REG_S	x31, FREGS_T6(sp)
+#endif
 	// save the arguments
 	REG_S	x10, FREGS_A0(sp)
 	REG_S	x11, FREGS_A1(sp)
@@ -106,16 +105,25 @@
 	REG_S	x15, FREGS_A5(sp)
 	REG_S	x16, FREGS_A6(sp)
 	REG_S	x17, FREGS_A7(sp)
+	mv	a0, sp
+	addi	a0, a0, FREGS_SIZE_ON_STACK
+	REG_S	a0, FREGS_SP(sp)	// Put original SP on stack
 	.endm
 
-	.macro RESTORE_ABI_REGS, all=0
+	.macro RESTORE_ABI_REGS
 	REG_L	t0, FREGS_EPC(sp)
 	REG_L	x1, FREGS_RA(sp)
 #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
 	REG_L	x8, FREGS_S0(sp)
 #endif
 	REG_L	x6,  FREGS_T1(sp)
-
+#ifdef CONFIG_CC_IS_CLANG
+	REG_L	x7,  FREGS_T2(sp)
+	REG_L	x28, FREGS_T3(sp)
+	REG_L	x29, FREGS_T4(sp)
+	REG_L	x30, FREGS_T5(sp)
+	REG_L	x31, FREGS_T6(sp)
+#endif
 	// restore the arguments
 	REG_L	x10, FREGS_A0(sp)
 	REG_L	x11, FREGS_A1(sp)
@@ -130,60 +138,71 @@
 	.endm
 
 	.macro PREPARE_ARGS
-	addi	a0, t0, -FENTRY_RA_OFFSET
+	addi	a0, t0, -MCOUNT_JALR_SIZE	// ip (callsite's jalr insn)
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	mv 	a1, ra				// parent_ip
+	REG_L   a2, -16(t0)			// op
+	REG_L   ra, FTRACE_OPS_FUNC(a2)		// op->func
+#else
 	la	a1, function_trace_op
-	REG_L	a2, 0(a1)
-	mv	a1, ra
-	mv	a3, sp
+	REG_L	a2, 0(a1)			// op
+	mv	a1, ra				// parent_ip
+#endif
+	mv	a3, sp				// regs
 	.endm
 
-#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
-
-#ifndef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 SYM_FUNC_START(ftrace_caller)
-	SAVE_ABI
-
-	addi	a0, t0, -FENTRY_RA_OFFSET
-	la	a1, function_trace_op
-	REG_L	a2, 0(a1)
-	mv	a1, ra
-	mv	a3, sp
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	/*
+	 * When CALL_OPS is enabled (2 or 4) nops [8B] are placed before the
+	 * function entry, these are later overwritten with the pointer to the
+	 * associated struct ftrace_ops.
+	 *
+	 * -8: &ftrace_ops of the associated tracer function.
+	 *<ftrace enable>:
+	 *  0: auipc  t0/ra, 0x?
+	 *  4: jalr   t0/ra, ?(t0/ra)
+	 *
+	 * -8: &ftrace_nop_ops
+	 *<ftrace disable>:
+	 *  0: nop
+	 *  4: nop
+	 *
+	 * t0 is set to ip+8 after the jalr is executed at the callsite,
+	 * so we find the associated op at t0-16.
+	 */
+	REG_L	t1, -16(t0) // op Should be SZ_REG instead of 16
 
-SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
-	call	ftrace_stub
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	a0, sp, ABI_RA
-	REG_L	a1, ABI_T0(sp)
-	addi	a1, a1, -FENTRY_RA_OFFSET
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	mv	a2, s0
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	/*
+	 * If the op has a direct call, handle it immediately without
+	 * saving/restoring registers.
+	 */
+	REG_L	t1, FTRACE_OPS_DIRECT_CALL(t1)
+	bnez	t1, ftrace_caller_direct
 #endif
-SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
-	call	ftrace_stub
 #endif
-	RESTORE_ABI
-	jr	t0
-SYM_FUNC_END(ftrace_caller)
-
-#else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
-SYM_FUNC_START(ftrace_caller)
-	mv	t1, zero
 	SAVE_ABI_REGS
 	PREPARE_ARGS
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	jalr	ra
+#else
 SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
-	call	ftrace_stub
-
+	REG_L	ra, ftrace_call_dest
+	jalr	ra, 0(ra)
+#endif
 	RESTORE_ABI_REGS
-	bnez	t1, .Ldirect
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	bnez	t1, ftrace_caller_direct
+#endif
 	jr	t0
-.Ldirect:
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_INNER_LABEL(ftrace_caller_direct, SYM_L_LOCAL)
 	jr	t1
+#endif
 SYM_FUNC_END(ftrace_caller)
 
-#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
-
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 SYM_CODE_START(ftrace_stub_direct_tramp)
 	jr	t0
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/module-sections.c linux-libre-6.16-gnu/arch/riscv/kernel/module-sections.c
index 91d0b355ceef..75551ac6504c 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/module-sections.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/module-sections.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleloader.h>
+#include <linux/sort.h>
 
 unsigned long module_emit_got_entry(struct module *mod, unsigned long val)
 {
@@ -55,44 +56,70 @@ unsigned long module_emit_plt_entry(struct module *mod, unsigned long val)
 	return (unsigned long)&plt[i];
 }
 
-static int is_rela_equal(const Elf_Rela *x, const Elf_Rela *y)
+#define cmp_3way(a, b)	((a) < (b) ? -1 : (a) > (b))
+
+static int cmp_rela(const void *a, const void *b)
 {
-	return x->r_info == y->r_info && x->r_addend == y->r_addend;
+	const Elf_Rela *x = a, *y = b;
+	int i;
+
+	/* sort by type, symbol index and addend */
+	i = cmp_3way(x->r_info, y->r_info);
+	if (i == 0)
+		i = cmp_3way(x->r_addend, y->r_addend);
+	return i;
 }
 
 static bool duplicate_rela(const Elf_Rela *rela, int idx)
 {
-	int i;
-	for (i = 0; i < idx; i++) {
-		if (is_rela_equal(&rela[i], &rela[idx]))
-			return true;
-	}
-	return false;
+	/*
+	 * Entries are sorted by type, symbol index and addend. That means
+	 * that, if a duplicate entry exists, it must be in the preceding slot.
+	 */
+	return idx > 0 && cmp_rela(rela + idx, rela + idx - 1) == 0;
 }
 
-static void count_max_entries(Elf_Rela *relas, int num,
+static void count_max_entries(const Elf_Rela *relas, size_t num,
 			      unsigned int *plts, unsigned int *gots)
 {
-	for (int i = 0; i < num; i++) {
+	for (size_t i = 0; i < num; i++) {
+		if (duplicate_rela(relas, i))
+			continue;
+
 		switch (ELF_R_TYPE(relas[i].r_info)) {
 		case R_RISCV_CALL_PLT:
 		case R_RISCV_PLT32:
-			if (!duplicate_rela(relas, i))
-				(*plts)++;
+			(*plts)++;
 			break;
 		case R_RISCV_GOT_HI20:
-			if (!duplicate_rela(relas, i))
-				(*gots)++;
+			(*gots)++;
 			break;
+		default:
+			unreachable();
 		}
 	}
 }
 
+static bool rela_needs_plt_got_entry(const Elf_Rela *rela)
+{
+	switch (ELF_R_TYPE(rela->r_info)) {
+	case R_RISCV_CALL_PLT:
+	case R_RISCV_GOT_HI20:
+	case R_RISCV_PLT32:
+		return true;
+	default:
+		return false;
+	}
+}
+
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
+	size_t num_scratch_relas = 0;
 	unsigned int num_plts = 0;
 	unsigned int num_gots = 0;
+	Elf_Rela *scratch = NULL;
+	size_t scratch_size = 0;
 	int i;
 
 	/*
@@ -122,9 +149,10 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 
 	/* Calculate the maxinum number of entries */
 	for (i = 0; i < ehdr->e_shnum; i++) {
+		size_t num_relas = sechdrs[i].sh_size / sizeof(Elf_Rela);
 		Elf_Rela *relas = (void *)ehdr + sechdrs[i].sh_offset;
-		int num_rela = sechdrs[i].sh_size / sizeof(Elf_Rela);
 		Elf_Shdr *dst_sec = sechdrs + sechdrs[i].sh_info;
+		size_t scratch_size_needed;
 
 		if (sechdrs[i].sh_type != SHT_RELA)
 			continue;
@@ -133,7 +161,28 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		if (!(dst_sec->sh_flags & SHF_EXECINSTR))
 			continue;
 
-		count_max_entries(relas, num_rela, &num_plts, &num_gots);
+		/*
+		 * apply_relocate_add() relies on HI20 and LO12 relocation pairs being
+		 * close together, so sort a copy of the section to avoid interfering.
+		 */
+		scratch_size_needed = (num_scratch_relas + num_relas) * sizeof(*scratch);
+		if (scratch_size_needed > scratch_size) {
+			scratch_size = scratch_size_needed;
+			scratch = kvrealloc(scratch, scratch_size, GFP_KERNEL);
+			if (!scratch)
+				return -ENOMEM;
+		}
+
+		for (size_t j = 0; j < num_relas; j++)
+			if (rela_needs_plt_got_entry(&relas[j]))
+				scratch[num_scratch_relas++] = relas[j];
+	}
+
+	if (scratch) {
+		/* sort the accumulated PLT/GOT relocations so duplicates are adjacent */
+		sort(scratch, num_scratch_relas, sizeof(*scratch), cmp_rela, NULL);
+		count_max_entries(scratch, num_scratch_relas, &num_plts, &num_gots);
+		kvfree(scratch);
 	}
 
 	mod->arch.plt.shdr->sh_type = SHT_NOBITS;
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/process.c linux-libre-6.16-gnu/arch/riscv/kernel/process.c
index 15d8f75902f8..a0a40889d79a 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/process.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/process.c
@@ -17,7 +17,9 @@
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <linux/personality.h>
+#include <linux/entry-common.h>
 
+#include <asm/asm-prototypes.h>
 #include <asm/unistd.h>
 #include <asm/processor.h>
 #include <asm/csr.h>
@@ -36,7 +38,8 @@ unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
-extern asmlinkage void ret_from_fork(void);
+extern asmlinkage void ret_from_fork_kernel_asm(void);
+extern asmlinkage void ret_from_fork_user_asm(void);
 
 void noinstr arch_cpu_idle(void)
 {
@@ -57,7 +60,7 @@ int get_unalign_ctl(struct task_struct *tsk, unsigned long adr)
 	if (!unaligned_ctl_available())
 		return -EINVAL;
 
-	return put_user(tsk->thread.align_ctl, (unsigned long __user *)adr);
+	return put_user(tsk->thread.align_ctl, (unsigned int __user *)adr);
 }
 
 void __show_regs(struct pt_regs *regs)
@@ -206,6 +209,18 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
+asmlinkage void ret_from_fork_kernel(void *fn_arg, int (*fn)(void *), struct pt_regs *regs)
+{
+	fn(fn_arg);
+
+	syscall_exit_to_user_mode(regs);
+}
+
+asmlinkage void ret_from_fork_user(struct pt_regs *regs)
+{
+	syscall_exit_to_user_mode(regs);
+}
+
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
 	unsigned long clone_flags = args->flags;
@@ -228,6 +243,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 
 		p->thread.s[0] = (unsigned long)args->fn;
 		p->thread.s[1] = (unsigned long)args->fn_arg;
+		p->thread.ra = (unsigned long)ret_from_fork_kernel_asm;
 	} else {
 		*childregs = *(current_pt_regs());
 		/* Turn off status.VS */
@@ -237,12 +253,11 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		if (clone_flags & CLONE_SETTLS)
 			childregs->tp = tls;
 		childregs->a0 = 0; /* Return value of fork() */
-		p->thread.s[0] = 0;
+		p->thread.ra = (unsigned long)ret_from_fork_user_asm;
 	}
 	p->thread.riscv_v_flags = 0;
 	if (has_vector() || has_xtheadvector())
 		riscv_v_thread_alloc(p);
-	p->thread.ra = (unsigned long)ret_from_fork;
 	p->thread.sp = (unsigned long)childregs; /* kernel sp */
 	return 0;
 }
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/sbi.c linux-libre-6.16-gnu/arch/riscv/kernel/sbi.c
index 1989b8cade1b..53836a9235e3 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/sbi.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/sbi.c
@@ -299,6 +299,76 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask,
 	return 0;
 }
 
+static bool sbi_fwft_supported;
+
+struct fwft_set_req {
+	u32 feature;
+	unsigned long value;
+	unsigned long flags;
+	atomic_t error;
+};
+
+static void cpu_sbi_fwft_set(void *arg)
+{
+	struct fwft_set_req *req = arg;
+	int ret;
+
+	ret = sbi_fwft_set(req->feature, req->value, req->flags);
+	if (ret)
+		atomic_set(&req->error, ret);
+}
+
+/**
+ * sbi_fwft_set() - Set a feature on the local hart
+ * @feature: The feature ID to be set
+ * @value: The feature value to be set
+ * @flags: FWFT feature set flags
+ *
+ * Return: 0 on success, appropriate linux error code otherwise.
+ */
+int sbi_fwft_set(u32 feature, unsigned long value, unsigned long flags)
+{
+	struct sbiret ret;
+
+	if (!sbi_fwft_supported)
+		return -EOPNOTSUPP;
+
+	ret = sbi_ecall(SBI_EXT_FWFT, SBI_EXT_FWFT_SET,
+			feature, value, flags, 0, 0, 0);
+
+	return sbi_err_map_linux_errno(ret.error);
+}
+
+/**
+ * sbi_fwft_set_cpumask() - Set a feature for the specified cpumask
+ * @mask: CPU mask of cpus that need the feature to be set
+ * @feature: The feature ID to be set
+ * @value: The feature value to be set
+ * @flags: FWFT feature set flags
+ *
+ * Return: 0 on success, appropriate linux error code otherwise.
+ */
+int sbi_fwft_set_cpumask(const cpumask_t *mask, u32 feature,
+			       unsigned long value, unsigned long flags)
+{
+	struct fwft_set_req req = {
+		.feature = feature,
+		.value = value,
+		.flags = flags,
+		.error = ATOMIC_INIT(0),
+	};
+
+	if (!sbi_fwft_supported)
+		return -EOPNOTSUPP;
+
+	if (feature & SBI_FWFT_GLOBAL_FEATURE_BIT)
+		return -EINVAL;
+
+	on_each_cpu_mask(mask, cpu_sbi_fwft_set, &req, 1);
+
+	return atomic_read(&req.error);
+}
+
 /**
  * sbi_set_timer() - Program the timer for next timer event.
  * @stime_value: The value after which next timer event should fire.
@@ -609,7 +679,7 @@ void __init sbi_init(void)
 		} else {
 			__sbi_rfence	= __sbi_rfence_v01;
 		}
-		if ((sbi_spec_version >= sbi_mk_version(0, 3)) &&
+		if (sbi_spec_version >= sbi_mk_version(0, 3) &&
 		    sbi_probe_extension(SBI_EXT_SRST)) {
 			pr_info("SBI SRST extension detected\n");
 			pm_power_off = sbi_srst_power_off;
@@ -617,11 +687,16 @@ void __init sbi_init(void)
 			sbi_srst_reboot_nb.priority = 192;
 			register_restart_handler(&sbi_srst_reboot_nb);
 		}
-		if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
-		    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+		if (sbi_spec_version >= sbi_mk_version(2, 0) &&
+		    sbi_probe_extension(SBI_EXT_DBCN) > 0) {
 			pr_info("SBI DBCN extension detected\n");
 			sbi_debug_console_available = true;
 		}
+		if (sbi_spec_version >= sbi_mk_version(3, 0) &&
+		    sbi_probe_extension(SBI_EXT_FWFT)) {
+			pr_info("SBI FWFT extension detected\n");
+			sbi_fwft_supported = true;
+		}
 	} else {
 		__sbi_set_timer = __sbi_set_timer_v01;
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/setup.c linux-libre-6.16-gnu/arch/riscv/kernel/setup.c
index f7c9a1caa83e..14888e5ea19a 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/setup.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/setup.c
@@ -50,6 +50,7 @@ atomic_t hart_lottery __section(".sdata")
 #endif
 ;
 unsigned long boot_cpu_hartid;
+EXPORT_SYMBOL_GPL(boot_cpu_hartid);
 
 /*
  * Place kernel memory regions on the resource tree so that
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/sys_hwprobe.c linux-libre-6.16-gnu/arch/riscv/kernel/sys_hwprobe.c
index 249aec8594a9..0b170e18a2be 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/sys_hwprobe.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/sys_hwprobe.c
@@ -15,6 +15,7 @@
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 #include <asm/vector.h>
+#include <asm/vendor_extensions/sifive_hwprobe.h>
 #include <asm/vendor_extensions/thead_hwprobe.h>
 #include <vdso/vsyscall.h>
 
@@ -96,6 +97,7 @@ static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
 		 * presence in the hart_isa bitmap, are made.
 		 */
 		EXT_KEY(ZAAMO);
+		EXT_KEY(ZABHA);
 		EXT_KEY(ZACAS);
 		EXT_KEY(ZALRSC);
 		EXT_KEY(ZAWRS);
@@ -300,6 +302,10 @@ static void hwprobe_one_pair(struct riscv_hwprobe *pair,
 		pair->value = riscv_timebase;
 		break;
 
+	case RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0:
+		hwprobe_isa_vendor_ext_sifive_0(pair, cpus);
+		break;
+
 	case RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0:
 		hwprobe_isa_vendor_ext_thead_0(pair, cpus);
 		break;
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/traps.c linux-libre-6.16-gnu/arch/riscv/kernel/traps.c
index 9c83848797a7..80230de167de 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/traps.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/traps.c
@@ -6,6 +6,7 @@
 #include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/irqflags.h>
 #include <linux/randomize_kstack.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
@@ -151,7 +152,9 @@ asmlinkage __visible __trap_section void name(struct pt_regs *regs)		\
 {										\
 	if (user_mode(regs)) {							\
 		irqentry_enter_from_user_mode(regs);				\
+		local_irq_enable();						\
 		do_trap_error(regs, signo, code, regs->epc, "Oops - " str);	\
+		local_irq_disable();						\
 		irqentry_exit_to_user_mode(regs);				\
 	} else {								\
 		irqentry_state_t state = irqentry_nmi_enter(regs);		\
@@ -173,17 +176,14 @@ asmlinkage __visible __trap_section void do_trap_insn_illegal(struct pt_regs *re
 
 	if (user_mode(regs)) {
 		irqentry_enter_from_user_mode(regs);
-
 		local_irq_enable();
 
 		handled = riscv_v_first_use_handler(regs);
-
-		local_irq_disable();
-
 		if (!handled)
 			do_trap_error(regs, SIGILL, ILL_ILLOPC, regs->epc,
 				      "Oops - illegal instruction");
 
+		local_irq_disable();
 		irqentry_exit_to_user_mode(regs);
 	} else {
 		irqentry_state_t state = irqentry_nmi_enter(regs);
@@ -308,9 +308,11 @@ asmlinkage __visible __trap_section void do_trap_break(struct pt_regs *regs)
 {
 	if (user_mode(regs)) {
 		irqentry_enter_from_user_mode(regs);
+		local_irq_enable();
 
 		handle_break(regs);
 
+		local_irq_disable();
 		irqentry_exit_to_user_mode(regs);
 	} else {
 		irqentry_state_t state = irqentry_nmi_enter(regs);
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/traps_misaligned.c linux-libre-6.16-gnu/arch/riscv/kernel/traps_misaligned.c
index 77c788660223..f760e4fcc052 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/traps_misaligned.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/traps_misaligned.c
@@ -16,6 +16,7 @@
 #include <asm/entry-common.h>
 #include <asm/hwprobe.h>
 #include <asm/cpufeature.h>
+#include <asm/sbi.h>
 #include <asm/vector.h>
 
 #define INSN_MATCH_LB			0x3
@@ -368,9 +369,7 @@ static int handle_scalar_misaligned_load(struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, addr);
 
-#ifdef CONFIG_RISCV_PROBE_UNALIGNED_ACCESS
 	*this_cpu_ptr(&misaligned_access_speed) = RISCV_HWPROBE_MISALIGNED_SCALAR_EMULATED;
-#endif
 
 	if (!unaligned_enabled)
 		return -1;
@@ -462,7 +461,7 @@ static int handle_scalar_misaligned_load(struct pt_regs *regs)
 	}
 
 	if (!fp)
-		SET_RD(insn, regs, val.data_ulong << shift >> shift);
+		SET_RD(insn, regs, (long)(val.data_ulong << shift) >> shift);
 	else if (len == 8)
 		set_f64_rd(insn, regs, val.data_u64);
 	else
@@ -626,6 +625,10 @@ bool __init check_vector_unaligned_access_emulated_all_cpus(void)
 {
 	int cpu;
 
+	/*
+	 * While being documented as very slow, schedule_on_each_cpu() is used since
+	 * kernel_vector_begin() expects irqs to be enabled or it will panic()
+	 */
 	schedule_on_each_cpu(check_vector_unaligned_access_emulated);
 
 	for_each_online_cpu(cpu)
@@ -642,11 +645,23 @@ bool __init check_vector_unaligned_access_emulated_all_cpus(void)
 }
 #endif
 
+static bool all_cpus_unaligned_scalar_access_emulated(void)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		if (per_cpu(misaligned_access_speed, cpu) !=
+		    RISCV_HWPROBE_MISALIGNED_SCALAR_EMULATED)
+			return false;
+
+	return true;
+}
+
 #ifdef CONFIG_RISCV_SCALAR_MISALIGNED
 
 static bool unaligned_ctl __read_mostly;
 
-void check_unaligned_access_emulated(struct work_struct *work __always_unused)
+static void check_unaligned_access_emulated(void *arg __always_unused)
 {
 	int cpu = smp_processor_id();
 	long *mas_ptr = per_cpu_ptr(&misaligned_access_speed, cpu);
@@ -657,6 +672,13 @@ void check_unaligned_access_emulated(struct work_struct *work __always_unused)
 	__asm__ __volatile__ (
 		"       "REG_L" %[tmp], 1(%[ptr])\n"
 		: [tmp] "=r" (tmp_val) : [ptr] "r" (&tmp_var) : "memory");
+}
+
+static int cpu_online_check_unaligned_access_emulated(unsigned int cpu)
+{
+	long *mas_ptr = per_cpu_ptr(&misaligned_access_speed, cpu);
+
+	check_unaligned_access_emulated(NULL);
 
 	/*
 	 * If unaligned_ctl is already set, this means that we detected that all
@@ -665,26 +687,23 @@ void check_unaligned_access_emulated(struct work_struct *work __always_unused)
 	 */
 	if (unlikely(unaligned_ctl && (*mas_ptr != RISCV_HWPROBE_MISALIGNED_SCALAR_EMULATED))) {
 		pr_crit("CPU misaligned accesses non homogeneous (expected all emulated)\n");
-		while (true)
-			cpu_relax();
+		return -EINVAL;
 	}
+
+	return 0;
 }
 
 bool __init check_unaligned_access_emulated_all_cpus(void)
 {
-	int cpu;
-
 	/*
 	 * We can only support PR_UNALIGN controls if all CPUs have misaligned
 	 * accesses emulated since tasks requesting such control can run on any
 	 * CPU.
 	 */
-	schedule_on_each_cpu(check_unaligned_access_emulated);
+	on_each_cpu(check_unaligned_access_emulated, NULL, 1);
 
-	for_each_online_cpu(cpu)
-		if (per_cpu(misaligned_access_speed, cpu)
-		    != RISCV_HWPROBE_MISALIGNED_SCALAR_EMULATED)
-			return false;
+	if (!all_cpus_unaligned_scalar_access_emulated())
+		return false;
 
 	unaligned_ctl = true;
 	return true;
@@ -699,4 +718,73 @@ bool __init check_unaligned_access_emulated_all_cpus(void)
 {
 	return false;
 }
+static int cpu_online_check_unaligned_access_emulated(unsigned int cpu)
+{
+	return 0;
+}
+#endif
+
+static bool misaligned_traps_delegated;
+
+#ifdef CONFIG_RISCV_SBI
+
+static int cpu_online_sbi_unaligned_setup(unsigned int cpu)
+{
+	if (sbi_fwft_set(SBI_FWFT_MISALIGNED_EXC_DELEG, 1, 0) &&
+	    misaligned_traps_delegated) {
+		pr_crit("Misaligned trap delegation non homogeneous (expected delegated)");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init unaligned_access_init(void)
+{
+	int ret;
+
+	ret = sbi_fwft_set_online_cpus(SBI_FWFT_MISALIGNED_EXC_DELEG, 1, 0);
+	if (ret)
+		return;
+
+	misaligned_traps_delegated = true;
+	pr_info("SBI misaligned access exception delegation ok\n");
+	/*
+	 * Note that we don't have to take any specific action here, if
+	 * the delegation is successful, then
+	 * check_unaligned_access_emulated() will verify that indeed the
+	 * platform traps on misaligned accesses.
+	 */
+}
+#else
+void __init unaligned_access_init(void) {}
+
+static int cpu_online_sbi_unaligned_setup(unsigned int cpu __always_unused)
+{
+	return 0;
+}
+
 #endif
+
+int cpu_online_unaligned_access_init(unsigned int cpu)
+{
+	int ret;
+
+	ret = cpu_online_sbi_unaligned_setup(cpu);
+	if (ret)
+		return ret;
+
+	return cpu_online_check_unaligned_access_emulated(cpu);
+}
+
+bool misaligned_traps_can_delegate(void)
+{
+	/*
+	 * Either we successfully requested misaligned traps delegation for all
+	 * CPUs, or the SBI does not implement the FWFT extension but delegated
+	 * the exception by default.
+	 */
+	return misaligned_traps_delegated ||
+	       all_cpus_unaligned_scalar_access_emulated();
+}
+EXPORT_SYMBOL_GPL(misaligned_traps_can_delegate);
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/unaligned_access_speed.c linux-libre-6.16-gnu/arch/riscv/kernel/unaligned_access_speed.c
index b8ba13819d05..ae2068425fbc 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/unaligned_access_speed.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/unaligned_access_speed.c
@@ -236,6 +236,11 @@ arch_initcall_sync(lock_and_set_unaligned_access_static_branch);
 
 static int riscv_online_cpu(unsigned int cpu)
 {
+	int ret = cpu_online_unaligned_access_init(cpu);
+
+	if (ret)
+		return ret;
+
 	/* We are already set since the last check */
 	if (per_cpu(misaligned_access_speed, cpu) != RISCV_HWPROBE_MISALIGNED_SCALAR_UNKNOWN) {
 		goto exit;
@@ -248,7 +253,6 @@ static int riscv_online_cpu(unsigned int cpu)
 	{
 		static struct page *buf;
 
-		check_unaligned_access_emulated(NULL);
 		buf = alloc_pages(GFP_KERNEL, MISALIGNED_BUFFER_ORDER);
 		if (!buf) {
 			pr_warn("Allocation failure, not measuring misaligned performance\n");
@@ -439,6 +443,8 @@ static int __init check_unaligned_access_all_cpus(void)
 {
 	int cpu;
 
+	unaligned_access_init();
+
 	if (unaligned_scalar_speed_param != RISCV_HWPROBE_MISALIGNED_SCALAR_UNKNOWN) {
 		pr_info("scalar unaligned access speed set to '%s' (%lu) by command line\n",
 			speed_str[unaligned_scalar_speed_param], unaligned_scalar_speed_param);
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vdso.c linux-libre-6.16-gnu/arch/riscv/kernel/vdso.c
index cc2895d1fbc2..3a8e038b10a2 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/vdso.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vdso.c
@@ -136,7 +136,7 @@ static int __setup_additional_pages(struct mm_struct *mm,
 
 	ret =
 	   _install_special_mapping(mm, vdso_base, vdso_text_len,
-		(VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC),
+		(VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_SEALED_SYSMAP),
 		vdso_info->cm);
 
 	if (IS_ERR(ret))
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vdso/Makefile linux-libre-6.16-gnu/arch/riscv/kernel/vdso/Makefile
index ad73607abc28..9ebb5e590f93 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/vdso/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vdso/Makefile
@@ -13,9 +13,17 @@ vdso-syms += flush_icache
 vdso-syms += hwprobe
 vdso-syms += sys_hwprobe
 
+ifdef CONFIG_VDSO_GETRANDOM
+vdso-syms += getrandom
+endif
+
 # Files to link into the vdso
 obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o
 
+ifdef CONFIG_VDSO_GETRANDOM
+obj-vdso += vgetrandom-chacha.o
+endif
+
 ccflags-y := -fno-stack-protector
 ccflags-y += -DDISABLE_BRANCH_PROFILING
 ccflags-y += -fno-builtin
@@ -24,6 +32,10 @@ ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -fPIC -include $(c-gettimeofday-y)
 endif
 
+ifneq ($(c-getrandom-y),)
+  CFLAGS_getrandom.o += -fPIC -include $(c-getrandom-y)
+endif
+
 CFLAGS_hwprobe.o += -fPIC
 
 # Build rules
@@ -38,6 +50,7 @@ endif
 
 # Disable -pg to prevent insert call site
 CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS)
+CFLAGS_REMOVE_getrandom.o = $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS)
 CFLAGS_REMOVE_hwprobe.o = $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS)
 
 # Force dependency
@@ -47,7 +60,7 @@ $(obj)/vdso.o: $(obj)/vdso.so
 $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold_and_check)
 LDFLAGS_vdso.so.dbg = -shared -soname=linux-vdso.so.1 \
-	--build-id=sha1 --hash-style=both --eh-frame-hdr
+	--build-id=sha1 --eh-frame-hdr
 
 # strip rule for the .so file
 $(obj)/%.so: OBJCOPYFLAGS := -S
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vdso/getrandom.c linux-libre-6.16-gnu/arch/riscv/kernel/vdso/getrandom.c
new file mode 100644
index 000000000000..f21922e8cebd
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vdso/getrandom.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Xi Ruoyao <xry111@xry111.site>. All Rights Reserved.
+ */
+#include <linux/types.h>
+
+ssize_t __vdso_getrandom(void *buffer, size_t len, unsigned int flags, void *opaque_state, size_t opaque_len)
+{
+	return __cvdso_getrandom(buffer, len, flags, opaque_state, opaque_len);
+}
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vdso/vdso.lds.S linux-libre-6.16-gnu/arch/riscv/kernel/vdso/vdso.lds.S
index 8e86965a8aae..c29ef12a63bb 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/vdso/vdso.lds.S
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vdso/vdso.lds.S
@@ -30,7 +30,7 @@ SECTIONS
 		*(.data .data.* .gnu.linkonce.d.*)
 		*(.dynbss)
 		*(.bss .bss.* .gnu.linkonce.b.*)
-	}
+	}						:text
 
 	.note		: { *(.note.*) }		:text	:note
 
@@ -79,6 +79,9 @@ VERSION
 		__vdso_flush_icache;
 #ifndef COMPAT_VDSO
 		__vdso_riscv_hwprobe;
+#endif
+#if defined(CONFIG_VDSO_GETRANDOM) && !defined(COMPAT_VDSO)
+		__vdso_getrandom;
 #endif
 	local: *;
 	};
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vdso/vgetrandom-chacha.S linux-libre-6.16-gnu/arch/riscv/kernel/vdso/vgetrandom-chacha.S
new file mode 100644
index 000000000000..5f0dad8f2373
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vdso/vgetrandom-chacha.S
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2025 Xi Ruoyao <xry111@xry111.site>. All Rights Reserved.
+ *
+ * Based on arch/loongarch/vdso/vgetrandom-chacha.S.
+ */
+
+#include <asm/asm.h>
+#include <linux/linkage.h>
+
+.text
+
+.macro	ROTRI	rd rs imm
+	slliw	t0, \rs, 32 - \imm
+	srliw	\rd, \rs, \imm
+	or	\rd, \rd, t0
+.endm
+
+.macro	OP_4REG	op d0 d1 d2 d3 s0 s1 s2 s3
+	\op	\d0, \d0, \s0
+	\op	\d1, \d1, \s1
+	\op	\d2, \d2, \s2
+	\op	\d3, \d3, \s3
+.endm
+
+/*
+ *	a0: output bytes
+ * 	a1: 32-byte key input
+ *	a2: 8-byte counter input/output
+ *	a3: number of 64-byte blocks to write to output
+ */
+SYM_FUNC_START(__arch_chacha20_blocks_nostack)
+
+#define output		a0
+#define key		a1
+#define counter		a2
+#define nblocks		a3
+#define i		a4
+#define state0		s0
+#define state1		s1
+#define state2		s2
+#define state3		s3
+#define state4		s4
+#define state5		s5
+#define state6		s6
+#define state7		s7
+#define state8		s8
+#define state9		s9
+#define state10		s10
+#define state11		s11
+#define state12		a5
+#define state13		a6
+#define state14		a7
+#define state15		t1
+#define cnt		t2
+#define copy0		t3
+#define copy1		t4
+#define copy2		t5
+#define copy3		t6
+
+/* Packs to be used with OP_4REG */
+#define line0		state0, state1, state2, state3
+#define line1		state4, state5, state6, state7
+#define line2		state8, state9, state10, state11
+#define line3		state12, state13, state14, state15
+
+#define line1_perm	state5, state6, state7, state4
+#define line2_perm	state10, state11, state8, state9
+#define line3_perm	state15, state12, state13, state14
+
+#define copy		copy0, copy1, copy2, copy3
+
+#define _16		16, 16, 16, 16
+#define _20		20, 20, 20, 20
+#define _24		24, 24, 24, 24
+#define _25		25, 25, 25, 25
+
+	/*
+	 * The ABI requires s0-s9 saved.
+	 * This does not violate the stack-less requirement: no sensitive data
+	 * is spilled onto the stack.
+	 */
+	addi		sp, sp, -12*SZREG
+	REG_S		s0,         (sp)
+	REG_S		s1,    SZREG(sp)
+	REG_S		s2,  2*SZREG(sp)
+	REG_S		s3,  3*SZREG(sp)
+	REG_S		s4,  4*SZREG(sp)
+	REG_S		s5,  5*SZREG(sp)
+	REG_S		s6,  6*SZREG(sp)
+	REG_S		s7,  7*SZREG(sp)
+	REG_S		s8,  8*SZREG(sp)
+	REG_S		s9,  9*SZREG(sp)
+	REG_S		s10, 10*SZREG(sp)
+	REG_S		s11, 11*SZREG(sp)
+
+	ld		cnt, (counter)
+
+	li		copy0, 0x61707865
+	li		copy1, 0x3320646e
+	li		copy2, 0x79622d32
+	li		copy3, 0x6b206574
+
+.Lblock:
+	/* state[0,1,2,3] = "expand 32-byte k" */
+	mv		state0, copy0
+	mv		state1, copy1
+	mv		state2, copy2
+	mv		state3, copy3
+
+	/* state[4,5,..,11] = key */
+	lw		state4,   (key)
+	lw		state5,  4(key)
+	lw		state6,  8(key)
+	lw		state7,  12(key)
+	lw		state8,  16(key)
+	lw		state9,  20(key)
+	lw		state10, 24(key)
+	lw		state11, 28(key)
+
+	/* state[12,13] = counter */
+	mv		state12, cnt
+	srli		state13, cnt, 32
+
+	/* state[14,15] = 0 */
+	mv		state14, zero
+	mv		state15, zero
+
+	li		i, 10
+.Lpermute:
+	/* odd round */
+	OP_4REG	addw	line0, line1
+	OP_4REG	xor	line3, line0
+	OP_4REG	ROTRI	line3, _16
+
+	OP_4REG	addw	line2, line3
+	OP_4REG	xor	line1, line2
+	OP_4REG	ROTRI	line1, _20
+
+	OP_4REG	addw	line0, line1
+	OP_4REG	xor	line3, line0
+	OP_4REG	ROTRI	line3, _24
+
+	OP_4REG	addw	line2, line3
+	OP_4REG	xor	line1, line2
+	OP_4REG	ROTRI	line1, _25
+
+	/* even round */
+	OP_4REG	addw	line0, line1_perm
+	OP_4REG	xor	line3_perm, line0
+	OP_4REG	ROTRI	line3_perm, _16
+
+	OP_4REG	addw	line2_perm, line3_perm
+	OP_4REG	xor	line1_perm, line2_perm
+	OP_4REG	ROTRI	line1_perm, _20
+
+	OP_4REG	addw	line0, line1_perm
+	OP_4REG	xor	line3_perm, line0
+	OP_4REG	ROTRI	line3_perm, _24
+
+	OP_4REG	addw	line2_perm, line3_perm
+	OP_4REG	xor	line1_perm, line2_perm
+	OP_4REG	ROTRI	line1_perm, _25
+
+	addi		i, i, -1
+	bnez		i, .Lpermute
+
+	/* output[0,1,2,3] = copy[0,1,2,3] + state[0,1,2,3] */
+	OP_4REG	addw	line0, copy
+	sw		state0,   (output)
+	sw		state1,  4(output)
+	sw		state2,  8(output)
+	sw		state3, 12(output)
+
+	/* from now on state[0,1,2,3] are scratch registers  */
+
+	/* state[0,1,2,3] = lo(key) */
+	lw		state0,   (key)
+	lw		state1,  4(key)
+	lw		state2,  8(key)
+	lw		state3, 12(key)
+
+	/* output[4,5,6,7] = state[0,1,2,3] + state[4,5,6,7] */
+	OP_4REG	addw	line1, line0
+	sw		state4, 16(output)
+	sw		state5, 20(output)
+	sw		state6, 24(output)
+	sw		state7, 28(output)
+
+	/* state[0,1,2,3] = hi(key) */
+	lw		state0, 16(key)
+	lw		state1, 20(key)
+	lw		state2, 24(key)
+	lw		state3, 28(key)
+
+	/* output[8,9,10,11] = tmp[0,1,2,3] + state[8,9,10,11] */
+	OP_4REG	addw	line2, line0
+	sw		state8,  32(output)
+	sw		state9,  36(output)
+	sw		state10, 40(output)
+	sw		state11, 44(output)
+
+	/* output[12,13,14,15] = state[12,13,14,15] + [cnt_lo, cnt_hi, 0, 0] */
+	addw		state12, state12, cnt
+	srli		state0, cnt, 32
+	addw		state13, state13, state0
+	sw		state12, 48(output)
+	sw		state13, 52(output)
+	sw		state14, 56(output)
+	sw		state15, 60(output)
+
+	/* ++counter */
+	addi		cnt, cnt, 1
+
+	/* output += 64 */
+	addi		output, output, 64
+	/* --nblocks */
+	addi		nblocks, nblocks, -1
+	bnez		nblocks, .Lblock
+
+	/* counter = [cnt_lo, cnt_hi] */
+	sd		cnt, (counter)
+
+	/* Zero out the potentially sensitive regs, in case nothing uses these
+	 * again.  As at now copy[0,1,2,3] just contains "expand 32-byte k" and
+	 * state[0,...,11] are s0-s11 those we'll restore in the epilogue, we
+	 * only need to zero state[12,...,15].
+	 */
+	mv		state12, zero
+	mv		state13, zero
+	mv		state14, zero
+	mv		state15, zero
+
+	REG_L		s0,         (sp)
+	REG_L		s1,    SZREG(sp)
+	REG_L		s2,  2*SZREG(sp)
+	REG_L		s3,  3*SZREG(sp)
+	REG_L		s4,  4*SZREG(sp)
+	REG_L		s5,  5*SZREG(sp)
+	REG_L		s6,  6*SZREG(sp)
+	REG_L		s7,  7*SZREG(sp)
+	REG_L		s8,  8*SZREG(sp)
+	REG_L		s9,  9*SZREG(sp)
+	REG_L		s10, 10*SZREG(sp)
+	REG_L		s11, 11*SZREG(sp)
+	addi		sp, sp, 12*SZREG
+
+	ret
+SYM_FUNC_END(__arch_chacha20_blocks_nostack)
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions.c linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions.c
index 9feb7f67a0a3..92d8ff81f42c 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions.c
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions.c
@@ -6,6 +6,7 @@
 #include <asm/vendorid_list.h>
 #include <asm/vendor_extensions.h>
 #include <asm/vendor_extensions/andes.h>
+#include <asm/vendor_extensions/sifive.h>
 #include <asm/vendor_extensions/thead.h>
 
 #include <linux/array_size.h>
@@ -15,6 +16,9 @@ struct riscv_isa_vendor_ext_data_list *riscv_isa_vendor_ext_list[] = {
 #ifdef CONFIG_RISCV_ISA_VENDOR_EXT_ANDES
 	&riscv_isa_vendor_ext_list_andes,
 #endif
+#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE
+	&riscv_isa_vendor_ext_list_sifive,
+#endif
 #ifdef CONFIG_RISCV_ISA_VENDOR_EXT_THEAD
 	&riscv_isa_vendor_ext_list_thead,
 #endif
@@ -45,6 +49,12 @@ bool __riscv_isa_vendor_extension_available(int cpu, unsigned long vendor, unsig
 		cpu_bmap = riscv_isa_vendor_ext_list_andes.per_hart_isa_bitmap;
 		break;
 	#endif
+	#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE
+	case SIFIVE_VENDOR_ID:
+		bmap = &riscv_isa_vendor_ext_list_sifive.all_harts_isa_bitmap;
+		cpu_bmap = riscv_isa_vendor_ext_list_sifive.per_hart_isa_bitmap;
+		break;
+	#endif
 	#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_THEAD
 	case THEAD_VENDOR_ID:
 		bmap = &riscv_isa_vendor_ext_list_thead.all_harts_isa_bitmap;
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions/Makefile linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/Makefile
index 866414c81a9f..a4eca96d1c8a 100644
--- linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_ANDES)	+= andes.o
+obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE)	+= sifive.o
+obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE)	+= sifive_hwprobe.o
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_THEAD)	+= thead.o
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_THEAD)	+= thead_hwprobe.o
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions/sifive.c linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/sifive.c
new file mode 100644
index 000000000000..8fcf67e8c07f
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/sifive.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <asm/cpufeature.h>
+#include <asm/vendor_extensions.h>
+#include <asm/vendor_extensions/sifive.h>
+
+#include <linux/array_size.h>
+#include <linux/types.h>
+
+/* All SiFive vendor extensions supported in Linux */
+static const struct riscv_isa_ext_data riscv_isa_vendor_ext_sifive[] = {
+	__RISCV_ISA_EXT_DATA(xsfvfnrclipxfqf, RISCV_ISA_VENDOR_EXT_XSFVFNRCLIPXFQF),
+	__RISCV_ISA_EXT_DATA(xsfvfwmaccqqq, RISCV_ISA_VENDOR_EXT_XSFVFWMACCQQQ),
+	__RISCV_ISA_EXT_DATA(xsfvqmaccdod, RISCV_ISA_VENDOR_EXT_XSFVQMACCDOD),
+	__RISCV_ISA_EXT_DATA(xsfvqmaccqoq, RISCV_ISA_VENDOR_EXT_XSFVQMACCQOQ),
+};
+
+struct riscv_isa_vendor_ext_data_list riscv_isa_vendor_ext_list_sifive = {
+	.ext_data_count = ARRAY_SIZE(riscv_isa_vendor_ext_sifive),
+	.ext_data = riscv_isa_vendor_ext_sifive,
+};
diff --git linux-libre-6.15-gnu/arch/riscv/kernel/vendor_extensions/sifive_hwprobe.c linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/sifive_hwprobe.c
new file mode 100644
index 000000000000..1f77f6309763
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/kernel/vendor_extensions/sifive_hwprobe.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <asm/vendor_extensions/sifive.h>
+#include <asm/vendor_extensions/sifive_hwprobe.h>
+#include <asm/vendor_extensions/vendor_hwprobe.h>
+
+#include <linux/cpumask.h>
+#include <linux/types.h>
+
+#include <uapi/asm/hwprobe.h>
+#include <uapi/asm/vendor/sifive.h>
+
+void hwprobe_isa_vendor_ext_sifive_0(struct riscv_hwprobe *pair, const struct cpumask *cpus)
+{
+	VENDOR_EXTENSION_SUPPORTED(pair, cpus,
+				   riscv_isa_vendor_ext_list_sifive.per_hart_isa_bitmap, {
+		VENDOR_EXT_KEY(XSFVQMACCDOD);
+		VENDOR_EXT_KEY(XSFVQMACCQOQ);
+		VENDOR_EXT_KEY(XSFVFNRCLIPXFQF);
+		VENDOR_EXT_KEY(XSFVFWMACCQQQ);
+	});
+}
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/Kconfig linux-libre-6.16-gnu/arch/riscv/kvm/Kconfig
index 0c3cbb0915ff..704c2899197e 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/Kconfig
+++ linux-libre-6.16-gnu/arch/riscv/kvm/Kconfig
@@ -18,7 +18,7 @@ menuconfig VIRTUALIZATION
 if VIRTUALIZATION
 
 config KVM
-	tristate "Kernel-based Virtual Machine (KVM) support (EXPERIMENTAL)"
+	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on RISCV_SBI && MMU
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_IRQ_ROUTING
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/aia.c linux-libre-6.16-gnu/arch/riscv/kvm/aia.c
index 19afd1f23537..dad318185660 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/aia.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/aia.c
@@ -30,28 +30,6 @@ unsigned int kvm_riscv_aia_nr_hgei;
 unsigned int kvm_riscv_aia_max_ids;
 DEFINE_STATIC_KEY_FALSE(kvm_riscv_aia_available);
 
-static int aia_find_hgei(struct kvm_vcpu *owner)
-{
-	int i, hgei;
-	unsigned long flags;
-	struct aia_hgei_control *hgctrl = get_cpu_ptr(&aia_hgei);
-
-	raw_spin_lock_irqsave(&hgctrl->lock, flags);
-
-	hgei = -1;
-	for (i = 1; i <= kvm_riscv_aia_nr_hgei; i++) {
-		if (hgctrl->owners[i] == owner) {
-			hgei = i;
-			break;
-		}
-	}
-
-	raw_spin_unlock_irqrestore(&hgctrl->lock, flags);
-
-	put_cpu_ptr(&aia_hgei);
-	return hgei;
-}
-
 static inline unsigned long aia_hvictl_value(bool ext_irq_pending)
 {
 	unsigned long hvictl;
@@ -95,7 +73,6 @@ void kvm_riscv_vcpu_aia_sync_interrupts(struct kvm_vcpu *vcpu)
 
 bool kvm_riscv_vcpu_aia_has_interrupts(struct kvm_vcpu *vcpu, u64 mask)
 {
-	int hgei;
 	unsigned long seip;
 
 	if (!kvm_riscv_aia_available())
@@ -114,11 +91,7 @@ bool kvm_riscv_vcpu_aia_has_interrupts(struct kvm_vcpu *vcpu, u64 mask)
 	if (!kvm_riscv_aia_initialized(vcpu->kvm) || !seip)
 		return false;
 
-	hgei = aia_find_hgei(vcpu);
-	if (hgei > 0)
-		return !!(ncsr_read(CSR_HGEIP) & BIT(hgei));
-
-	return false;
+	return kvm_riscv_vcpu_aia_imsic_has_interrupt(vcpu);
 }
 
 void kvm_riscv_vcpu_aia_update_hvip(struct kvm_vcpu *vcpu)
@@ -164,6 +137,9 @@ void kvm_riscv_vcpu_aia_load(struct kvm_vcpu *vcpu, int cpu)
 		csr_write(CSR_HVIPRIO2H, csr->hviprio2h);
 #endif
 	}
+
+	if (kvm_riscv_aia_initialized(vcpu->kvm))
+		kvm_riscv_vcpu_aia_imsic_load(vcpu, cpu);
 }
 
 void kvm_riscv_vcpu_aia_put(struct kvm_vcpu *vcpu)
@@ -174,6 +150,9 @@ void kvm_riscv_vcpu_aia_put(struct kvm_vcpu *vcpu)
 	if (!kvm_riscv_aia_available())
 		return;
 
+	if (kvm_riscv_aia_initialized(vcpu->kvm))
+		kvm_riscv_vcpu_aia_imsic_put(vcpu);
+
 	if (kvm_riscv_nacl_available()) {
 		nsh = nacl_shmem();
 		csr->vsiselect = nacl_csr_read(nsh, CSR_VSISELECT);
@@ -472,22 +451,6 @@ void kvm_riscv_aia_free_hgei(int cpu, int hgei)
 	raw_spin_unlock_irqrestore(&hgctrl->lock, flags);
 }
 
-void kvm_riscv_aia_wakeon_hgei(struct kvm_vcpu *owner, bool enable)
-{
-	int hgei;
-
-	if (!kvm_riscv_aia_available())
-		return;
-
-	hgei = aia_find_hgei(owner);
-	if (hgei > 0) {
-		if (enable)
-			csr_set(CSR_HGEIE, BIT(hgei));
-		else
-			csr_clear(CSR_HGEIE, BIT(hgei));
-	}
-}
-
 static irqreturn_t hgei_interrupt(int irq, void *dev_id)
 {
 	int i;
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/aia_device.c linux-libre-6.16-gnu/arch/riscv/kvm/aia_device.c
index 39cd26af5a69..806c41931cde 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/aia_device.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/aia_device.c
@@ -12,36 +12,6 @@
 #include <linux/kvm_host.h>
 #include <linux/uaccess.h>
 
-static void unlock_vcpus(struct kvm *kvm, int vcpu_lock_idx)
-{
-	struct kvm_vcpu *tmp_vcpu;
-
-	for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
-		tmp_vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
-		mutex_unlock(&tmp_vcpu->mutex);
-	}
-}
-
-static void unlock_all_vcpus(struct kvm *kvm)
-{
-	unlock_vcpus(kvm, atomic_read(&kvm->online_vcpus) - 1);
-}
-
-static bool lock_all_vcpus(struct kvm *kvm)
-{
-	struct kvm_vcpu *tmp_vcpu;
-	unsigned long c;
-
-	kvm_for_each_vcpu(c, tmp_vcpu, kvm) {
-		if (!mutex_trylock(&tmp_vcpu->mutex)) {
-			unlock_vcpus(kvm, c - 1);
-			return false;
-		}
-	}
-
-	return true;
-}
-
 static int aia_create(struct kvm_device *dev, u32 type)
 {
 	int ret;
@@ -53,7 +23,7 @@ static int aia_create(struct kvm_device *dev, u32 type)
 		return -EEXIST;
 
 	ret = -EBUSY;
-	if (!lock_all_vcpus(kvm))
+	if (kvm_trylock_all_vcpus(kvm))
 		return ret;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
@@ -65,7 +35,7 @@ static int aia_create(struct kvm_device *dev, u32 type)
 	kvm->arch.aia.in_kernel = true;
 
 out_unlock:
-	unlock_all_vcpus(kvm);
+	kvm_unlock_all_vcpus(kvm);
 	return ret;
 }
 
@@ -526,12 +496,10 @@ int kvm_riscv_vcpu_aia_update(struct kvm_vcpu *vcpu)
 void kvm_riscv_vcpu_aia_reset(struct kvm_vcpu *vcpu)
 {
 	struct kvm_vcpu_aia_csr *csr = &vcpu->arch.aia_context.guest_csr;
-	struct kvm_vcpu_aia_csr *reset_csr =
-				&vcpu->arch.aia_context.guest_reset_csr;
 
 	if (!kvm_riscv_aia_available())
 		return;
-	memcpy(csr, reset_csr, sizeof(*csr));
+	memset(csr, 0, sizeof(*csr));
 
 	/* Proceed only if AIA was initialized successfully */
 	if (!kvm_riscv_aia_initialized(vcpu->kvm))
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/aia_imsic.c linux-libre-6.16-gnu/arch/riscv/kvm/aia_imsic.c
index 29ef9c2133a9..2ff865943ebb 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/aia_imsic.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/aia_imsic.c
@@ -676,6 +676,48 @@ static void imsic_swfile_update(struct kvm_vcpu *vcpu,
 	imsic_swfile_extirq_update(vcpu);
 }
 
+bool kvm_riscv_vcpu_aia_imsic_has_interrupt(struct kvm_vcpu *vcpu)
+{
+	struct imsic *imsic = vcpu->arch.aia_context.imsic_state;
+	unsigned long flags;
+	bool ret = false;
+
+	/*
+	 * The IMSIC SW-file directly injects interrupt via hvip so
+	 * only check for interrupt when IMSIC VS-file is being used.
+	 */
+
+	read_lock_irqsave(&imsic->vsfile_lock, flags);
+	if (imsic->vsfile_cpu > -1)
+		ret = !!(csr_read(CSR_HGEIP) & BIT(imsic->vsfile_hgei));
+	read_unlock_irqrestore(&imsic->vsfile_lock, flags);
+
+	return ret;
+}
+
+void kvm_riscv_vcpu_aia_imsic_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	/*
+	 * No need to explicitly clear HGEIE CSR bits because the
+	 * hgei interrupt handler (aka hgei_interrupt()) will always
+	 * clear it for us.
+	 */
+}
+
+void kvm_riscv_vcpu_aia_imsic_put(struct kvm_vcpu *vcpu)
+{
+	struct imsic *imsic = vcpu->arch.aia_context.imsic_state;
+	unsigned long flags;
+
+	if (!kvm_vcpu_is_blocking(vcpu))
+		return;
+
+	read_lock_irqsave(&imsic->vsfile_lock, flags);
+	if (imsic->vsfile_cpu > -1)
+		csr_set(CSR_HGEIE, BIT(imsic->vsfile_hgei));
+	read_unlock_irqrestore(&imsic->vsfile_lock, flags);
+}
+
 void kvm_riscv_vcpu_aia_imsic_release(struct kvm_vcpu *vcpu)
 {
 	unsigned long flags;
@@ -781,6 +823,9 @@ int kvm_riscv_vcpu_aia_imsic_update(struct kvm_vcpu *vcpu)
 	 * producers to the new IMSIC VS-file.
 	 */
 
+	/* Ensure HGEIE CSR bit is zero before using the new IMSIC VS-file */
+	csr_clear(CSR_HGEIE, BIT(new_vsfile_hgei));
+
 	/* Zero-out new IMSIC VS-file */
 	imsic_vsfile_local_clear(new_vsfile_hgei, imsic->nr_hw_eix);
 
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu.c
index 02635bac91f1..0462863206ca 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu.c
@@ -51,12 +51,33 @@ const struct kvm_stats_header kvm_vcpu_stats_header = {
 		       sizeof(kvm_vcpu_stats_desc),
 };
 
-static void kvm_riscv_reset_vcpu(struct kvm_vcpu *vcpu)
+static void kvm_riscv_vcpu_context_reset(struct kvm_vcpu *vcpu,
+					 bool kvm_sbi_reset)
 {
 	struct kvm_vcpu_csr *csr = &vcpu->arch.guest_csr;
-	struct kvm_vcpu_csr *reset_csr = &vcpu->arch.guest_reset_csr;
 	struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
-	struct kvm_cpu_context *reset_cntx = &vcpu->arch.guest_reset_context;
+	void *vector_datap = cntx->vector.datap;
+
+	memset(cntx, 0, sizeof(*cntx));
+	memset(csr, 0, sizeof(*csr));
+	memset(&vcpu->arch.smstateen_csr, 0, sizeof(vcpu->arch.smstateen_csr));
+
+	/* Restore datap as it's not a part of the guest context. */
+	cntx->vector.datap = vector_datap;
+
+	if (kvm_sbi_reset)
+		kvm_riscv_vcpu_sbi_load_reset_state(vcpu);
+
+	/* Setup reset state of shadow SSTATUS and HSTATUS CSRs */
+	cntx->sstatus = SR_SPP | SR_SPIE;
+
+	cntx->hstatus |= HSTATUS_VTW;
+	cntx->hstatus |= HSTATUS_SPVP;
+	cntx->hstatus |= HSTATUS_SPV;
+}
+
+static void kvm_riscv_reset_vcpu(struct kvm_vcpu *vcpu, bool kvm_sbi_reset)
+{
 	bool loaded;
 
 	/**
@@ -71,13 +92,7 @@ static void kvm_riscv_reset_vcpu(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.last_exit_cpu = -1;
 
-	memcpy(csr, reset_csr, sizeof(*csr));
-
-	spin_lock(&vcpu->arch.reset_cntx_lock);
-	memcpy(cntx, reset_cntx, sizeof(*cntx));
-	spin_unlock(&vcpu->arch.reset_cntx_lock);
-
-	memset(&vcpu->arch.smstateen_csr, 0, sizeof(vcpu->arch.smstateen_csr));
+	kvm_riscv_vcpu_context_reset(vcpu, kvm_sbi_reset);
 
 	kvm_riscv_vcpu_fp_reset(vcpu);
 
@@ -112,8 +127,6 @@ int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
 int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
 	int rc;
-	struct kvm_cpu_context *cntx;
-	struct kvm_vcpu_csr *reset_csr = &vcpu->arch.guest_reset_csr;
 
 	spin_lock_init(&vcpu->arch.mp_state_lock);
 
@@ -133,24 +146,11 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	/* Setup VCPU hfence queue */
 	spin_lock_init(&vcpu->arch.hfence_lock);
 
-	/* Setup reset state of shadow SSTATUS and HSTATUS CSRs */
-	spin_lock_init(&vcpu->arch.reset_cntx_lock);
-
-	spin_lock(&vcpu->arch.reset_cntx_lock);
-	cntx = &vcpu->arch.guest_reset_context;
-	cntx->sstatus = SR_SPP | SR_SPIE;
-	cntx->hstatus = 0;
-	cntx->hstatus |= HSTATUS_VTW;
-	cntx->hstatus |= HSTATUS_SPVP;
-	cntx->hstatus |= HSTATUS_SPV;
-	spin_unlock(&vcpu->arch.reset_cntx_lock);
+	spin_lock_init(&vcpu->arch.reset_state.lock);
 
-	if (kvm_riscv_vcpu_alloc_vector_context(vcpu, cntx))
+	if (kvm_riscv_vcpu_alloc_vector_context(vcpu))
 		return -ENOMEM;
 
-	/* By default, make CY, TM, and IR counters accessible in VU mode */
-	reset_csr->scounteren = 0x7;
-
 	/* Setup VCPU timer */
 	kvm_riscv_vcpu_timer_init(vcpu);
 
@@ -169,7 +169,7 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	kvm_riscv_vcpu_sbi_init(vcpu);
 
 	/* Reset VCPU */
-	kvm_riscv_reset_vcpu(vcpu);
+	kvm_riscv_reset_vcpu(vcpu, false);
 
 	return 0;
 }
@@ -207,16 +207,6 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return kvm_riscv_vcpu_timer_pending(vcpu);
 }
 
-void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
-{
-	kvm_riscv_aia_wakeon_hgei(vcpu, true);
-}
-
-void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
-{
-	kvm_riscv_aia_wakeon_hgei(vcpu, false);
-}
-
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return (kvm_riscv_vcpu_has_interrupts(vcpu, -1UL) &&
@@ -518,6 +508,12 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	case KVM_MP_STATE_STOPPED:
 		__kvm_riscv_vcpu_power_off(vcpu);
 		break;
+	case KVM_MP_STATE_INIT_RECEIVED:
+		if (vcpu->kvm->arch.mp_state_reset)
+			kvm_riscv_reset_vcpu(vcpu, false);
+		else
+			ret = -EINVAL;
+		break;
 	default:
 		ret = -EINVAL;
 	}
@@ -706,7 +702,7 @@ static void kvm_riscv_check_vcpu_requests(struct kvm_vcpu *vcpu)
 		}
 
 		if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu))
-			kvm_riscv_reset_vcpu(vcpu);
+			kvm_riscv_reset_vcpu(vcpu, true);
 
 		if (kvm_check_request(KVM_REQ_UPDATE_HGATP, vcpu))
 			kvm_riscv_gstage_update_hgatp(vcpu);
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi.c
index d1c83a77735e..6e09b518a5d1 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi.c
@@ -143,9 +143,9 @@ void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
 	struct kvm_vcpu *tmp;
 
 	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
-		spin_lock(&vcpu->arch.mp_state_lock);
+		spin_lock(&tmp->arch.mp_state_lock);
 		WRITE_ONCE(tmp->arch.mp_state.mp_state, KVM_MP_STATE_STOPPED);
-		spin_unlock(&vcpu->arch.mp_state_lock);
+		spin_unlock(&tmp->arch.mp_state_lock);
 	}
 	kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_SLEEP);
 
@@ -156,6 +156,34 @@ void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
 	run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
 }
 
+void kvm_riscv_vcpu_sbi_request_reset(struct kvm_vcpu *vcpu,
+				      unsigned long pc, unsigned long a1)
+{
+	spin_lock(&vcpu->arch.reset_state.lock);
+	vcpu->arch.reset_state.pc = pc;
+	vcpu->arch.reset_state.a1 = a1;
+	spin_unlock(&vcpu->arch.reset_state.lock);
+
+	kvm_make_request(KVM_REQ_VCPU_RESET, vcpu);
+}
+
+void kvm_riscv_vcpu_sbi_load_reset_state(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_csr *csr = &vcpu->arch.guest_csr;
+	struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
+	struct kvm_vcpu_reset_state *reset_state = &vcpu->arch.reset_state;
+
+	cntx->a0 = vcpu->vcpu_id;
+
+	spin_lock(&vcpu->arch.reset_state.lock);
+	cntx->sepc = reset_state->pc;
+	cntx->a1 = reset_state->a1;
+	spin_unlock(&vcpu->arch.reset_state.lock);
+
+	cntx->sstatus &= ~SR_SIE;
+	csr->vsatp = 0;
+}
+
 int kvm_riscv_vcpu_sbi_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_hsm.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_hsm.c
index 3070bb31745d..f26207f84bab 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_hsm.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_hsm.c
@@ -15,7 +15,6 @@
 
 static int kvm_sbi_hsm_vcpu_start(struct kvm_vcpu *vcpu)
 {
-	struct kvm_cpu_context *reset_cntx;
 	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
 	struct kvm_vcpu *target_vcpu;
 	unsigned long target_vcpuid = cp->a0;
@@ -32,17 +31,7 @@ static int kvm_sbi_hsm_vcpu_start(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	spin_lock(&target_vcpu->arch.reset_cntx_lock);
-	reset_cntx = &target_vcpu->arch.guest_reset_context;
-	/* start address */
-	reset_cntx->sepc = cp->a1;
-	/* target vcpu id to start */
-	reset_cntx->a0 = target_vcpuid;
-	/* private data passed from kernel */
-	reset_cntx->a1 = cp->a2;
-	spin_unlock(&target_vcpu->arch.reset_cntx_lock);
-
-	kvm_make_request(KVM_REQ_VCPU_RESET, target_vcpu);
+	kvm_riscv_vcpu_sbi_request_reset(target_vcpu, cp->a1, cp->a2);
 
 	__kvm_riscv_vcpu_power_on(target_vcpu);
 
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_replace.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_replace.c
index 5fbf3f94f1e8..b17fad091bab 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_replace.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_replace.c
@@ -103,7 +103,7 @@ static int kvm_sbi_ext_rfence_handler(struct kvm_vcpu *vcpu, struct kvm_run *run
 		kvm_riscv_vcpu_pmu_incr_fw(vcpu, SBI_PMU_FW_FENCE_I_SENT);
 		break;
 	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA:
-		if (cp->a2 == 0 && cp->a3 == 0)
+		if ((cp->a2 == 0 && cp->a3 == 0) || cp->a3 == -1UL)
 			kvm_riscv_hfence_vvma_all(vcpu->kvm, hbase, hmask);
 		else
 			kvm_riscv_hfence_vvma_gva(vcpu->kvm, hbase, hmask,
@@ -111,7 +111,7 @@ static int kvm_sbi_ext_rfence_handler(struct kvm_vcpu *vcpu, struct kvm_run *run
 		kvm_riscv_vcpu_pmu_incr_fw(vcpu, SBI_PMU_FW_HFENCE_VVMA_SENT);
 		break;
 	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID:
-		if (cp->a2 == 0 && cp->a3 == 0)
+		if ((cp->a2 == 0 && cp->a3 == 0) || cp->a3 == -1UL)
 			kvm_riscv_hfence_vvma_asid_all(vcpu->kvm,
 						       hbase, hmask, cp->a4);
 		else
@@ -127,9 +127,9 @@ static int kvm_sbi_ext_rfence_handler(struct kvm_vcpu *vcpu, struct kvm_run *run
 	case SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID:
 		/*
 		 * Until nested virtualization is implemented, the
-		 * SBI HFENCE calls should be treated as NOPs
+		 * SBI HFENCE calls should return not supported
+		 * hence fallthrough.
 		 */
-		break;
 	default:
 		retdata->err_val = SBI_ERR_NOT_SUPPORTED;
 	}
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_system.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_system.c
index bc0ebba89003..359be90b0fc5 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_sbi_system.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_sbi_system.c
@@ -13,7 +13,6 @@ static int kvm_sbi_ext_susp_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
 				    struct kvm_vcpu_sbi_return *retdata)
 {
 	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
-	struct kvm_cpu_context *reset_cntx;
 	unsigned long funcid = cp->a6;
 	unsigned long hva, i;
 	struct kvm_vcpu *tmp;
@@ -45,14 +44,7 @@ static int kvm_sbi_ext_susp_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
 			}
 		}
 
-		spin_lock(&vcpu->arch.reset_cntx_lock);
-		reset_cntx = &vcpu->arch.guest_reset_context;
-		reset_cntx->sepc = cp->a1;
-		reset_cntx->a0 = vcpu->vcpu_id;
-		reset_cntx->a1 = cp->a2;
-		spin_unlock(&vcpu->arch.reset_cntx_lock);
-
-		kvm_make_request(KVM_REQ_VCPU_RESET, vcpu);
+		kvm_riscv_vcpu_sbi_request_reset(vcpu, cp->a1, cp->a2);
 
 		/* userspace provides the suspend implementation */
 		kvm_riscv_vcpu_sbi_forward(vcpu, run);
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_timer.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_timer.c
index ff672fa71fcc..85a7262115e1 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_timer.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_timer.c
@@ -345,8 +345,24 @@ void kvm_riscv_vcpu_timer_save(struct kvm_vcpu *vcpu)
 	/*
 	 * The vstimecmp CSRs are saved by kvm_riscv_vcpu_timer_sync()
 	 * upon every VM exit so no need to save here.
+	 *
+	 * If VS-timer expires when no VCPU running on a host CPU then
+	 * WFI executed by such host CPU will be effective NOP resulting
+	 * in no power savings. This is because as-per RISC-V Privileged
+	 * specificaiton: "WFI is also required to resume execution for
+	 * locally enabled interrupts pending at any privilege level,
+	 * regardless of the global interrupt enable at each privilege
+	 * level."
+	 *
+	 * To address the above issue, vstimecmp CSR must be set to -1UL
+	 * over here when VCPU is scheduled-out or exits to user space.
 	 */
 
+	csr_write(CSR_VSTIMECMP, -1UL);
+#if defined(CONFIG_32BIT)
+	csr_write(CSR_VSTIMECMPH, -1UL);
+#endif
+
 	/* timer should be enabled for the remaining operations */
 	if (unlikely(!t->init_done))
 		return;
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_vector.c linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_vector.c
index d92d1348045c..a5f88cb717f3 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vcpu_vector.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vcpu_vector.c
@@ -22,6 +22,9 @@ void kvm_riscv_vcpu_vector_reset(struct kvm_vcpu *vcpu)
 	struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
 
 	cntx->sstatus &= ~SR_VS;
+
+	cntx->vector.vlenb = riscv_v_vsize / 32;
+
 	if (riscv_isa_extension_available(isa, v)) {
 		cntx->sstatus |= SR_VS_INITIAL;
 		WARN_ON(!cntx->vector.datap);
@@ -70,13 +73,11 @@ void kvm_riscv_vcpu_host_vector_restore(struct kvm_cpu_context *cntx)
 		__kvm_riscv_vector_restore(cntx);
 }
 
-int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu,
-					struct kvm_cpu_context *cntx)
+int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu)
 {
-	cntx->vector.datap = kmalloc(riscv_v_vsize, GFP_KERNEL);
-	if (!cntx->vector.datap)
+	vcpu->arch.guest_context.vector.datap = kzalloc(riscv_v_vsize, GFP_KERNEL);
+	if (!vcpu->arch.guest_context.vector.datap)
 		return -ENOMEM;
-	cntx->vector.vlenb = riscv_v_vsize / 32;
 
 	vcpu->arch.host_context.vector.datap = kzalloc(riscv_v_vsize, GFP_KERNEL);
 	if (!vcpu->arch.host_context.vector.datap)
@@ -87,7 +88,7 @@ int kvm_riscv_vcpu_alloc_vector_context(struct kvm_vcpu *vcpu,
 
 void kvm_riscv_vcpu_free_vector_context(struct kvm_vcpu *vcpu)
 {
-	kfree(vcpu->arch.guest_reset_context.vector.datap);
+	kfree(vcpu->arch.guest_context.vector.datap);
 	kfree(vcpu->arch.host_context.vector.datap);
 }
 #endif
diff --git linux-libre-6.15-gnu/arch/riscv/kvm/vm.c linux-libre-6.16-gnu/arch/riscv/kvm/vm.c
index 7396b8654f45..b27ec8f96697 100644
--- linux-libre-6.15-gnu/arch/riscv/kvm/vm.c
+++ linux-libre-6.16-gnu/arch/riscv/kvm/vm.c
@@ -209,6 +209,19 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	return r;
 }
 
+int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
+{
+	switch (cap->cap) {
+	case KVM_CAP_RISCV_MP_STATE_RESET:
+		if (cap->flags)
+			return -EINVAL;
+		kvm->arch.mp_state_reset = true;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
 {
 	return -EINVAL;
diff --git linux-libre-6.15-gnu/arch/riscv/lib/Makefile linux-libre-6.16-gnu/arch/riscv/lib/Makefile
index b1c46153606a..0baec92d2f55 100644
--- linux-libre-6.15-gnu/arch/riscv/lib/Makefile
+++ linux-libre-6.16-gnu/arch/riscv/lib/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= crypto/
 lib-y			+= delay.o
 lib-y			+= memcpy.o
 lib-y			+= memset.o
diff --git linux-libre-6.15-gnu/arch/riscv/lib/crypto/Kconfig linux-libre-6.16-gnu/arch/riscv/lib/crypto/Kconfig
new file mode 100644
index 000000000000..47c99ea97ce2
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CRYPTO_CHACHA_RISCV64
+	tristate
+	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
+	default CRYPTO_LIB_CHACHA
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	select CRYPTO_LIB_CHACHA_GENERIC
+
+config CRYPTO_SHA256_RISCV64
+	tristate
+	depends on 64BIT && RISCV_ISA_V && TOOLCHAIN_HAS_VECTOR_CRYPTO
+	default CRYPTO_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256
+	select CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD
+	select CRYPTO_LIB_SHA256_GENERIC
diff --git linux-libre-6.15-gnu/arch/riscv/lib/crypto/Makefile linux-libre-6.16-gnu/arch/riscv/lib/crypto/Makefile
new file mode 100644
index 000000000000..b7cb877a2c07
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_CRYPTO_CHACHA_RISCV64) += chacha-riscv64.o
+chacha-riscv64-y := chacha-riscv64-glue.o chacha-riscv64-zvkb.o
+
+obj-$(CONFIG_CRYPTO_SHA256_RISCV64) += sha256-riscv64.o
+sha256-riscv64-y := sha256.o sha256-riscv64-zvknha_or_zvknhb-zvkb.o
diff --git linux-libre-6.15-gnu/arch/riscv/lib/crypto/chacha-riscv64-glue.c linux-libre-6.16-gnu/arch/riscv/lib/crypto/chacha-riscv64-glue.c
new file mode 100644
index 000000000000..8c3f11d79be3
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/chacha-riscv64-glue.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ChaCha stream cipher (RISC-V optimized)
+ *
+ * Copyright (C) 2023 SiFive, Inc.
+ * Author: Jerry Shih <jerry.shih@sifive.com>
+ */
+
+#include <asm/simd.h>
+#include <asm/vector.h>
+#include <crypto/chacha.h>
+#include <crypto/internal/simd.h>
+#include <linux/linkage.h>
+#include <linux/module.h>
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_zvkb);
+
+asmlinkage void chacha_zvkb(struct chacha_state *state, const u8 *in, u8 *out,
+			    size_t nblocks, int nrounds);
+
+void hchacha_block_arch(const struct chacha_state *state,
+			u32 out[HCHACHA_OUT_WORDS], int nrounds)
+{
+	hchacha_block_generic(state, out, nrounds);
+}
+EXPORT_SYMBOL(hchacha_block_arch);
+
+void chacha_crypt_arch(struct chacha_state *state, u8 *dst, const u8 *src,
+		       unsigned int bytes, int nrounds)
+{
+	u8 block_buffer[CHACHA_BLOCK_SIZE];
+	unsigned int full_blocks = bytes / CHACHA_BLOCK_SIZE;
+	unsigned int tail_bytes = bytes % CHACHA_BLOCK_SIZE;
+
+	if (!static_branch_likely(&use_zvkb) || !crypto_simd_usable())
+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
+
+	kernel_vector_begin();
+	if (full_blocks) {
+		chacha_zvkb(state, src, dst, full_blocks, nrounds);
+		src += full_blocks * CHACHA_BLOCK_SIZE;
+		dst += full_blocks * CHACHA_BLOCK_SIZE;
+	}
+	if (tail_bytes) {
+		memcpy(block_buffer, src, tail_bytes);
+		chacha_zvkb(state, block_buffer, block_buffer, 1, nrounds);
+		memcpy(dst, block_buffer, tail_bytes);
+	}
+	kernel_vector_end();
+}
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+bool chacha_is_arch_optimized(void)
+{
+	return static_key_enabled(&use_zvkb);
+}
+EXPORT_SYMBOL(chacha_is_arch_optimized);
+
+static int __init riscv64_chacha_mod_init(void)
+{
+	if (riscv_isa_extension_available(NULL, ZVKB) &&
+	    riscv_vector_vlen() >= 128)
+		static_branch_enable(&use_zvkb);
+	return 0;
+}
+subsys_initcall(riscv64_chacha_mod_init);
+
+static void __exit riscv64_chacha_mod_exit(void)
+{
+}
+module_exit(riscv64_chacha_mod_exit);
+
+MODULE_DESCRIPTION("ChaCha stream cipher (RISC-V optimized)");
+MODULE_AUTHOR("Jerry Shih <jerry.shih@sifive.com>");
+MODULE_LICENSE("GPL");
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/chacha-riscv64-zvkb.S linux-libre-6.16-gnu/arch/riscv/lib/crypto/chacha-riscv64-zvkb.S
similarity index 85%
rename from arch/riscv/crypto/chacha-riscv64-zvkb.S
rename to arch/riscv/lib/crypto/chacha-riscv64-zvkb.S
index bf057737ac69..b777d0b4e379 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/chacha-riscv64-zvkb.S
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/chacha-riscv64-zvkb.S
@@ -46,11 +46,11 @@
 .text
 .option arch, +zvkb
 
-#define KEYP		a0
+#define STATEP		a0
 #define INP		a1
 #define OUTP		a2
-#define LEN		a3
-#define IVP		a4
+#define NBLOCKS		a3
+#define NROUNDS		a4
 
 #define CONSTS0		a5
 #define CONSTS1		a6
@@ -59,7 +59,7 @@
 #define TMP		t1
 #define VL		t2
 #define STRIDE		t3
-#define NROUNDS		t4
+#define ROUND_CTR	t4
 #define KEY0		s0
 #define KEY1		s1
 #define KEY2		s2
@@ -132,14 +132,16 @@
 	vror.vi		\b3, \b3, 32 - 7
 .endm
 
-// void chacha20_zvkb(const u32 key[8], const u8 *in, u8 *out, size_t len,
-//		      const u32 iv[4]);
+// void chacha_zvkb(struct chacha_state *state, const u8 *in, u8 *out,
+//		    size_t nblocks, int nrounds);
 //
-// |len| must be nonzero and a multiple of 64 (CHACHA_BLOCK_SIZE).
-// The counter is treated as 32-bit, following the RFC7539 convention.
-SYM_FUNC_START(chacha20_zvkb)
-	srli		LEN, LEN, 6	// Bytes to blocks
-
+// |nblocks| is the number of 64-byte blocks to process, and must be nonzero.
+//
+// |state| gives the ChaCha state matrix, including the 32-bit counter in
+// state->x[12] following the RFC7539 convention; note that this differs from
+// the original Salsa20 paper which uses a 64-bit counter in state->x[12..13].
+// The updated 32-bit counter is written back to state->x[12] before returning.
+SYM_FUNC_START(chacha_zvkb)
 	addi		sp, sp, -96
 	sd		s0, 0(sp)
 	sd		s1, 8(sp)
@@ -157,26 +159,26 @@ SYM_FUNC_START(chacha20_zvkb)
 	li		STRIDE, 64
 
 	// Set up the initial state matrix in scalar registers.
-	li		CONSTS0, 0x61707865	// "expa" little endian
-	li		CONSTS1, 0x3320646e	// "nd 3" little endian
-	li		CONSTS2, 0x79622d32	// "2-by" little endian
-	li		CONSTS3, 0x6b206574	// "te k" little endian
-	lw		KEY0, 0(KEYP)
-	lw		KEY1, 4(KEYP)
-	lw		KEY2, 8(KEYP)
-	lw		KEY3, 12(KEYP)
-	lw		KEY4, 16(KEYP)
-	lw		KEY5, 20(KEYP)
-	lw		KEY6, 24(KEYP)
-	lw		KEY7, 28(KEYP)
-	lw		COUNTER, 0(IVP)
-	lw		NONCE0, 4(IVP)
-	lw		NONCE1, 8(IVP)
-	lw		NONCE2, 12(IVP)
+	lw		CONSTS0, 0(STATEP)
+	lw		CONSTS1, 4(STATEP)
+	lw		CONSTS2, 8(STATEP)
+	lw		CONSTS3, 12(STATEP)
+	lw		KEY0, 16(STATEP)
+	lw		KEY1, 20(STATEP)
+	lw		KEY2, 24(STATEP)
+	lw		KEY3, 28(STATEP)
+	lw		KEY4, 32(STATEP)
+	lw		KEY5, 36(STATEP)
+	lw		KEY6, 40(STATEP)
+	lw		KEY7, 44(STATEP)
+	lw		COUNTER, 48(STATEP)
+	lw		NONCE0, 52(STATEP)
+	lw		NONCE1, 56(STATEP)
+	lw		NONCE2, 60(STATEP)
 
 .Lblock_loop:
 	// Set vl to the number of blocks to process in this iteration.
-	vsetvli		VL, LEN, e32, m1, ta, ma
+	vsetvli		VL, NBLOCKS, e32, m1, ta, ma
 
 	// Set up the initial state matrix for the next VL blocks in v0-v15.
 	// v{i} holds the i'th 32-bit word of the state matrix for all blocks.
@@ -203,16 +205,16 @@ SYM_FUNC_START(chacha20_zvkb)
 	// v{16+i} holds the i'th 32-bit word for all blocks.
 	vlsseg8e32.v	v16, (INP), STRIDE
 
-	li		NROUNDS, 20
+	mv		ROUND_CTR, NROUNDS
 .Lnext_doubleround:
-	addi		NROUNDS, NROUNDS, -2
+	addi		ROUND_CTR, ROUND_CTR, -2
 	// column round
 	chacha_round	v0, v4, v8, v12, v1, v5, v9, v13, \
 			v2, v6, v10, v14, v3, v7, v11, v15
 	// diagonal round
 	chacha_round	v0, v5, v10, v15, v1, v6, v11, v12, \
 			v2, v7, v8, v13, v3, v4, v9, v14
-	bnez		NROUNDS, .Lnext_doubleround
+	bnez		ROUND_CTR, .Lnext_doubleround
 
 	// Load the second half of the input data for each block into v24-v31.
 	// v{24+i} holds the {8+i}'th 32-bit word for all blocks.
@@ -271,12 +273,13 @@ SYM_FUNC_START(chacha20_zvkb)
 	// Update the counter, the remaining number of blocks, and the input and
 	// output pointers according to the number of blocks processed (VL).
 	add		COUNTER, COUNTER, VL
-	sub		LEN, LEN, VL
+	sub		NBLOCKS, NBLOCKS, VL
 	slli		TMP, VL, 6
 	add		OUTP, OUTP, TMP
 	add		INP, INP, TMP
-	bnez		LEN, .Lblock_loop
+	bnez		NBLOCKS, .Lblock_loop
 
+	sw		COUNTER, 48(STATEP)
 	ld		s0, 0(sp)
 	ld		s1, 8(sp)
 	ld		s2, 16(sp)
@@ -291,4 +294,4 @@ SYM_FUNC_START(chacha20_zvkb)
 	ld		s11, 88(sp)
 	addi		sp, sp, 96
 	ret
-SYM_FUNC_END(chacha20_zvkb)
+SYM_FUNC_END(chacha_zvkb)
diff --git linux-libre-6.15-gnu/arch/riscv/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S linux-libre-6.16-gnu/arch/riscv/lib/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S
similarity index 97%
rename from arch/riscv/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S
rename to arch/riscv/lib/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S
index 8ebcc17de4dc..fad501ad0617 100644
--- linux-libre-6.15-gnu/arch/riscv/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.S
@@ -43,7 +43,7 @@
 // - RISC-V Vector SHA-2 Secure Hash extension ('Zvknha' or 'Zvknhb')
 // - RISC-V Vector Cryptography Bit-manipulation extension ('Zvkb')
 
-#include <linux/cfi_types.h>
+#include <linux/linkage.h>
 
 .text
 .option arch, +zvknha, +zvkb
@@ -106,9 +106,9 @@
 	sha256_4rounds	\last, \k3, W3, W0, W1, W2
 .endm
 
-// void sha256_transform_zvknha_or_zvknhb_zvkb(u32 state[8], const u8 *data,
-//					       int num_blocks);
-SYM_TYPED_FUNC_START(sha256_transform_zvknha_or_zvknhb_zvkb)
+// void sha256_transform_zvknha_or_zvknhb_zvkb(u32 state[SHA256_STATE_WORDS],
+//					       const u8 *data, size_t nblocks);
+SYM_FUNC_START(sha256_transform_zvknha_or_zvknhb_zvkb)
 
 	// Load the round constants into K0-K15.
 	vsetivli	zero, 4, e32, m1, ta, ma
diff --git linux-libre-6.15-gnu/arch/riscv/lib/crypto/sha256.c linux-libre-6.16-gnu/arch/riscv/lib/crypto/sha256.c
new file mode 100644
index 000000000000..71808397dff4
--- /dev/null
+++ linux-libre-6.16-gnu/arch/riscv/lib/crypto/sha256.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SHA-256 (RISC-V accelerated)
+ *
+ * Copyright (C) 2022 VRULL GmbH
+ * Author: Heiko Stuebner <heiko.stuebner@vrull.eu>
+ *
+ * Copyright (C) 2023 SiFive, Inc.
+ * Author: Jerry Shih <jerry.shih@sifive.com>
+ */
+
+#include <asm/vector.h>
+#include <crypto/internal/sha2.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+asmlinkage void sha256_transform_zvknha_or_zvknhb_zvkb(
+	u32 state[SHA256_STATE_WORDS], const u8 *data, size_t nblocks);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_extensions);
+
+void sha256_blocks_simd(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
+{
+	if (static_branch_likely(&have_extensions)) {
+		kernel_vector_begin();
+		sha256_transform_zvknha_or_zvknhb_zvkb(state, data, nblocks);
+		kernel_vector_end();
+	} else {
+		sha256_blocks_generic(state, data, nblocks);
+	}
+}
+EXPORT_SYMBOL_GPL(sha256_blocks_simd);
+
+void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS],
+			const u8 *data, size_t nblocks)
+{
+	sha256_blocks_generic(state, data, nblocks);
+}
+EXPORT_SYMBOL_GPL(sha256_blocks_arch);
+
+bool sha256_is_arch_optimized(void)
+{
+	return static_key_enabled(&have_extensions);
+}
+EXPORT_SYMBOL_GPL(sha256_is_arch_optimized);
+
+static int __init riscv64_sha256_mod_init(void)
+{
+	/* Both zvknha and zvknhb provide the SHA-256 instructions. */
+	if ((riscv_isa_extension_available(NULL, ZVKNHA) ||
+	     riscv_isa_extension_available(NULL, ZVKNHB)) &&
+	    riscv_isa_extension_available(NULL, ZVKB) &&
+	    riscv_vector_vlen() >= 128)
+		static_branch_enable(&have_extensions);
+	return 0;
+}
+subsys_initcall(riscv64_sha256_mod_init);
+
+static void __exit riscv64_sha256_mod_exit(void)
+{
+}
+module_exit(riscv64_sha256_mod_exit);
+
+MODULE_DESCRIPTION("SHA-256 (RISC-V accelerated)");
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@vrull.eu>");
+MODULE_LICENSE("GPL");
diff --git linux-libre-6.15-gnu/arch/riscv/lib/riscv_v_helpers.c linux-libre-6.16-gnu/arch/riscv/lib/riscv_v_helpers.c
index be38a93cedae..7bbdfc6d4552 100644
--- linux-libre-6.15-gnu/arch/riscv/lib/riscv_v_helpers.c
+++ linux-libre-6.16-gnu/arch/riscv/lib/riscv_v_helpers.c
@@ -16,8 +16,11 @@
 #ifdef CONFIG_MMU
 size_t riscv_v_usercopy_threshold = CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD;
 int __asm_vector_usercopy(void *dst, void *src, size_t n);
+int __asm_vector_usercopy_sum_enabled(void *dst, void *src, size_t n);
 int fallback_scalar_usercopy(void *dst, void *src, size_t n);
-asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n)
+int fallback_scalar_usercopy_sum_enabled(void *dst, void *src, size_t n);
+asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n,
+				     bool enable_sum)
 {
 	size_t remain, copied;
 
@@ -26,7 +29,8 @@ asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n)
 		goto fallback;
 
 	kernel_vector_begin();
-	remain = __asm_vector_usercopy(dst, src, n);
+	remain = enable_sum ? __asm_vector_usercopy(dst, src, n) :
+			      __asm_vector_usercopy_sum_enabled(dst, src, n);
 	kernel_vector_end();
 
 	if (remain) {
@@ -40,6 +44,7 @@ asmlinkage int enter_vector_usercopy(void *dst, void *src, size_t n)
 	return remain;
 
 fallback:
-	return fallback_scalar_usercopy(dst, src, n);
+	return enable_sum ? fallback_scalar_usercopy(dst, src, n) :
+			    fallback_scalar_usercopy_sum_enabled(dst, src, n);
 }
 #endif
diff --git linux-libre-6.15-gnu/arch/riscv/lib/uaccess.S linux-libre-6.16-gnu/arch/riscv/lib/uaccess.S
index 6a9f116bb545..4efea1b3326c 100644
--- linux-libre-6.15-gnu/arch/riscv/lib/uaccess.S
+++ linux-libre-6.16-gnu/arch/riscv/lib/uaccess.S
@@ -17,14 +17,43 @@ SYM_FUNC_START(__asm_copy_to_user)
 	ALTERNATIVE("j fallback_scalar_usercopy", "nop", 0, RISCV_ISA_EXT_ZVE32X, CONFIG_RISCV_ISA_V)
 	REG_L	t0, riscv_v_usercopy_threshold
 	bltu	a2, t0, fallback_scalar_usercopy
-	tail enter_vector_usercopy
+	li	a3, 1
+	tail 	enter_vector_usercopy
 #endif
-SYM_FUNC_START(fallback_scalar_usercopy)
+SYM_FUNC_END(__asm_copy_to_user)
+EXPORT_SYMBOL(__asm_copy_to_user)
+SYM_FUNC_ALIAS(__asm_copy_from_user, __asm_copy_to_user)
+EXPORT_SYMBOL(__asm_copy_from_user)
 
+SYM_FUNC_START(fallback_scalar_usercopy)
 	/* Enable access to user memory */
-	li t6, SR_SUM
-	csrs CSR_STATUS, t6
+	li	t6, SR_SUM
+	csrs 	CSR_STATUS, t6
+	mv 	t6, ra
 
+	call 	fallback_scalar_usercopy_sum_enabled
+
+	/* Disable access to user memory */
+	mv 	ra, t6
+	li 	t6, SR_SUM
+	csrc 	CSR_STATUS, t6
+	ret
+SYM_FUNC_END(fallback_scalar_usercopy)
+
+SYM_FUNC_START(__asm_copy_to_user_sum_enabled)
+#ifdef CONFIG_RISCV_ISA_V
+	ALTERNATIVE("j fallback_scalar_usercopy_sum_enabled", "nop", 0, RISCV_ISA_EXT_ZVE32X, CONFIG_RISCV_ISA_V)
+	REG_L	t0, riscv_v_usercopy_threshold
+	bltu	a2, t0, fallback_scalar_usercopy_sum_enabled
+	li	a3, 0
+	tail 	enter_vector_usercopy
+#endif
+SYM_FUNC_END(__asm_copy_to_user_sum_enabled)
+SYM_FUNC_ALIAS(__asm_copy_from_user_sum_enabled, __asm_copy_to_user_sum_enabled)
+EXPORT_SYMBOL(__asm_copy_from_user_sum_enabled)
+EXPORT_SYMBOL(__asm_copy_to_user_sum_enabled)
+
+SYM_FUNC_START(fallback_scalar_usercopy_sum_enabled)
 	/*
 	 * Save the terminal address which will be used to compute the number
 	 * of bytes copied in case of a fixup exception.
@@ -178,23 +207,12 @@ SYM_FUNC_START(fallback_scalar_usercopy)
 	bltu	a0, t0, 4b	/* t0 - end of dst */
 
 .Lout_copy_user:
-	/* Disable access to user memory */
-	csrc CSR_STATUS, t6
 	li	a0, 0
 	ret
-
-	/* Exception fixup code */
 10:
-	/* Disable access to user memory */
-	csrc CSR_STATUS, t6
 	sub a0, t5, a0
 	ret
-SYM_FUNC_END(__asm_copy_to_user)
-SYM_FUNC_END(fallback_scalar_usercopy)
-EXPORT_SYMBOL(__asm_copy_to_user)
-SYM_FUNC_ALIAS(__asm_copy_from_user, __asm_copy_to_user)
-EXPORT_SYMBOL(__asm_copy_from_user)
-
+SYM_FUNC_END(fallback_scalar_usercopy_sum_enabled)
 
 SYM_FUNC_START(__clear_user)
 
diff --git linux-libre-6.15-gnu/arch/riscv/lib/uaccess_vector.S linux-libre-6.16-gnu/arch/riscv/lib/uaccess_vector.S
index 7c45f26de4f7..03b5560609a2 100644
--- linux-libre-6.15-gnu/arch/riscv/lib/uaccess_vector.S
+++ linux-libre-6.16-gnu/arch/riscv/lib/uaccess_vector.S
@@ -24,7 +24,18 @@ SYM_FUNC_START(__asm_vector_usercopy)
 	/* Enable access to user memory */
 	li	t6, SR_SUM
 	csrs	CSR_STATUS, t6
+	mv	t6, ra
 
+	call 	__asm_vector_usercopy_sum_enabled
+
+	/* Disable access to user memory */
+	mv 	ra, t6
+	li 	t6, SR_SUM
+	csrc	CSR_STATUS, t6
+	ret
+SYM_FUNC_END(__asm_vector_usercopy)
+
+SYM_FUNC_START(__asm_vector_usercopy_sum_enabled)
 loop:
 	vsetvli iVL, iNum, e8, ELEM_LMUL_SETTING, ta, ma
 	fixup vle8.v vData, (pSrc), 10f
@@ -36,8 +47,6 @@ loop:
 
 	/* Exception fixup for vector load is shared with normal exit */
 10:
-	/* Disable access to user memory */
-	csrc	CSR_STATUS, t6
 	mv	a0, iNum
 	ret
 
@@ -49,4 +58,4 @@ loop:
 	csrr	t2, CSR_VSTART
 	sub	iNum, iNum, t2
 	j	10b
-SYM_FUNC_END(__asm_vector_usercopy)
+SYM_FUNC_END(__asm_vector_usercopy_sum_enabled)
diff --git linux-libre-6.15-gnu/arch/riscv/mm/cacheflush.c linux-libre-6.16-gnu/arch/riscv/mm/cacheflush.c
index b81672729887..4ca5aafce22e 100644
--- linux-libre-6.15-gnu/arch/riscv/mm/cacheflush.c
+++ linux-libre-6.16-gnu/arch/riscv/mm/cacheflush.c
@@ -24,7 +24,20 @@ void flush_icache_all(void)
 
 	if (num_online_cpus() < 2)
 		return;
-	else if (riscv_use_sbi_for_rfence())
+
+	/*
+	 * Make sure all previous writes to the D$ are ordered before making
+	 * the IPI. The RISC-V spec states that a hart must execute a data fence
+	 * before triggering a remote fence.i in order to make the modification
+	 * visable for remote harts.
+	 *
+	 * IPIs on RISC-V are triggered by MMIO writes to either CLINT or
+	 * S-IMSIC, so the fence ensures previous data writes "happen before"
+	 * the MMIO.
+	 */
+	RISCV_FENCE(w, o);
+
+	if (riscv_use_sbi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
@@ -101,6 +114,9 @@ EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
 unsigned int riscv_cboz_block_size;
 EXPORT_SYMBOL_GPL(riscv_cboz_block_size);
 
+unsigned int riscv_cbop_block_size;
+EXPORT_SYMBOL_GPL(riscv_cbop_block_size);
+
 static void __init cbo_get_block_size(struct device_node *node,
 				      const char *name, u32 *block_size,
 				      unsigned long *first_hartid)
@@ -125,8 +141,8 @@ static void __init cbo_get_block_size(struct device_node *node,
 
 void __init riscv_init_cbo_blocksizes(void)
 {
-	unsigned long cbom_hartid, cboz_hartid;
-	u32 cbom_block_size = 0, cboz_block_size = 0;
+	unsigned long cbom_hartid, cboz_hartid, cbop_hartid;
+	u32 cbom_block_size = 0, cboz_block_size = 0, cbop_block_size = 0;
 	struct device_node *node;
 	struct acpi_table_header *rhct;
 	acpi_status status;
@@ -138,13 +154,15 @@ void __init riscv_init_cbo_blocksizes(void)
 					   &cbom_block_size, &cbom_hartid);
 			cbo_get_block_size(node, "riscv,cboz-block-size",
 					   &cboz_block_size, &cboz_hartid);
+			cbo_get_block_size(node, "riscv,cbop-block-size",
+					   &cbop_block_size, &cbop_hartid);
 		}
 	} else {
 		status = acpi_get_table(ACPI_SIG_RHCT, 0, &rhct);
 		if (ACPI_FAILURE(status))
 			return;
 
-		acpi_get_cbo_block_size(rhct, &cbom_block_size, &cboz_block_size, NULL);
+		acpi_get_cbo_block_size(rhct, &cbom_block_size, &cboz_block_size, &cbop_block_size);
 		acpi_put_table((struct acpi_table_header *)rhct);
 	}
 
@@ -153,6 +171,9 @@ void __init riscv_init_cbo_blocksizes(void)
 
 	if (cboz_block_size)
 		riscv_cboz_block_size = cboz_block_size;
+
+	if (cbop_block_size)
+		riscv_cbop_block_size = cbop_block_size;
 }
 
 #ifdef CONFIG_SMP
@@ -172,7 +193,7 @@ static void set_icache_stale_mask(void)
 	stale_cpu = cpumask_test_cpu(cpu, mask);
 
 	cpumask_setall(mask);
-	cpumask_assign_cpu(cpu, mask, stale_cpu);
+	__assign_cpu(cpu, mask, stale_cpu);
 	put_cpu();
 }
 #endif
diff --git linux-libre-6.15-gnu/arch/riscv/mm/init.c linux-libre-6.16-gnu/arch/riscv/mm/init.c
index ab475ec6ca42..8d0374d7ce8e 100644
--- linux-libre-6.15-gnu/arch/riscv/mm/init.c
+++ linux-libre-6.16-gnu/arch/riscv/mm/init.c
@@ -442,7 +442,12 @@ static phys_addr_t __meminit alloc_pte_late(uintptr_t va)
 {
 	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM, 0);
 
-	BUG_ON(!ptdesc || !pagetable_pte_ctor(ptdesc));
+	/*
+	 * We do not know which mm the PTE page is associated to at this point.
+	 * Passing NULL to the ctor is the safe option, though it may result
+	 * in unnecessary work (e.g. initialising the ptlock for init_mm).
+	 */
+	BUG_ON(!ptdesc || !pagetable_pte_ctor(NULL, ptdesc));
 	return __pa((pte_t *)ptdesc_address(ptdesc));
 }
 
@@ -522,7 +527,8 @@ static phys_addr_t __meminit alloc_pmd_late(uintptr_t va)
 {
 	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM, 0);
 
-	BUG_ON(!ptdesc || !pagetable_pmd_ctor(ptdesc));
+	/* See comment in alloc_pte_late() regarding NULL passed the ctor */
+	BUG_ON(!ptdesc || !pagetable_pmd_ctor(NULL, ptdesc));
 	return __pa((pmd_t *)ptdesc_address(ptdesc));
 }
 
@@ -584,11 +590,11 @@ static phys_addr_t __init alloc_pud_fixmap(uintptr_t va)
 
 static phys_addr_t __meminit alloc_pud_late(uintptr_t va)
 {
-	unsigned long vaddr;
+	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, 0);
 
-	vaddr = __get_free_page(GFP_KERNEL);
-	BUG_ON(!vaddr);
-	return __pa(vaddr);
+	BUG_ON(!ptdesc);
+	pagetable_pud_ctor(ptdesc);
+	return __pa((pud_t *)ptdesc_address(ptdesc));
 }
 
 static p4d_t *__init get_p4d_virt_early(phys_addr_t pa)
@@ -622,11 +628,11 @@ static phys_addr_t __init alloc_p4d_fixmap(uintptr_t va)
 
 static phys_addr_t __meminit alloc_p4d_late(uintptr_t va)
 {
-	unsigned long vaddr;
+	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, 0);
 
-	vaddr = __get_free_page(GFP_KERNEL);
-	BUG_ON(!vaddr);
-	return __pa(vaddr);
+	BUG_ON(!ptdesc);
+	pagetable_p4d_ctor(ptdesc);
+	return __pa((p4d_t *)ptdesc_address(ptdesc));
 }
 
 static void __meminit create_pud_mapping(pud_t *pudp, uintptr_t va, phys_addr_t pa, phys_addr_t sz,
diff --git linux-libre-6.15-gnu/arch/riscv/mm/pgtable.c linux-libre-6.16-gnu/arch/riscv/mm/pgtable.c
index 4ae67324f992..8b6c0a112a8d 100644
--- linux-libre-6.15-gnu/arch/riscv/mm/pgtable.c
+++ linux-libre-6.16-gnu/arch/riscv/mm/pgtable.c
@@ -154,4 +154,14 @@ pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
 	flush_tlb_mm(vma->vm_mm);
 	return pmd;
 }
+
+pud_t pudp_invalidate(struct vm_area_struct *vma, unsigned long address,
+		      pud_t *pudp)
+{
+	VM_WARN_ON_ONCE(!pud_present(*pudp));
+	pud_t old = pudp_establish(vma, address, pudp, pud_mkinvalid(*pudp));
+
+	flush_pud_tlb_range(vma, address, address + HPAGE_PUD_SIZE);
+	return old;
+}
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git linux-libre-6.15-gnu/arch/riscv/mm/ptdump.c linux-libre-6.16-gnu/arch/riscv/mm/ptdump.c
index 9d5f657a251b..32922550a50a 100644
--- linux-libre-6.15-gnu/arch/riscv/mm/ptdump.c
+++ linux-libre-6.16-gnu/arch/riscv/mm/ptdump.c
@@ -318,6 +318,38 @@ static void note_page(struct ptdump_state *pt_st, unsigned long addr,
 	}
 }
 
+static void note_page_pte(struct ptdump_state *pt_st, unsigned long addr, pte_t pte)
+{
+	note_page(pt_st, addr, 4, pte_val(pte));
+}
+
+static void note_page_pmd(struct ptdump_state *pt_st, unsigned long addr, pmd_t pmd)
+{
+	note_page(pt_st, addr, 3, pmd_val(pmd));
+}
+
+static void note_page_pud(struct ptdump_state *pt_st, unsigned long addr, pud_t pud)
+{
+	note_page(pt_st, addr, 2, pud_val(pud));
+}
+
+static void note_page_p4d(struct ptdump_state *pt_st, unsigned long addr, p4d_t p4d)
+{
+	note_page(pt_st, addr, 1, p4d_val(p4d));
+}
+
+static void note_page_pgd(struct ptdump_state *pt_st, unsigned long addr, pgd_t pgd)
+{
+	note_page(pt_st, addr, 0, pgd_val(pgd));
+}
+
+static void note_page_flush(struct ptdump_state *pt_st)
+{
+	pte_t pte_zero = {0};
+
+	note_page(pt_st, 0, -1, pte_val(pte_zero));
+}
+
 static void ptdump_walk(struct seq_file *s, struct ptd_mm_info *pinfo)
 {
 	struct pg_state st = {
@@ -325,7 +357,12 @@ static void ptdump_walk(struct seq_file *s, struct ptd_mm_info *pinfo)
 		.marker = pinfo->markers,
 		.level = -1,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]) {
 				{pinfo->base_addr, pinfo->end},
 				{0, 0}
@@ -347,7 +384,12 @@ bool ptdump_check_wx(void)
 		.level = -1,
 		.check_wx = true,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]) {
 				{KERN_VIRT_START, ULONG_MAX},
 				{0, 0}
diff --git linux-libre-6.15-gnu/arch/riscv/mm/tlbflush.c linux-libre-6.16-gnu/arch/riscv/mm/tlbflush.c
index f9e27ba1df99..e737ba7949b1 100644
--- linux-libre-6.15-gnu/arch/riscv/mm/tlbflush.c
+++ linux-libre-6.16-gnu/arch/riscv/mm/tlbflush.c
@@ -7,6 +7,27 @@
 #include <linux/mmu_notifier.h>
 #include <asm/sbi.h>
 #include <asm/mmu_context.h>
+#include <asm/cpufeature.h>
+
+#define has_svinval()	riscv_has_extension_unlikely(RISCV_ISA_EXT_SVINVAL)
+
+static inline void local_sfence_inval_ir(void)
+{
+	asm volatile(SFENCE_INVAL_IR() ::: "memory");
+}
+
+static inline void local_sfence_w_inval(void)
+{
+	asm volatile(SFENCE_W_INVAL() ::: "memory");
+}
+
+static inline void local_sinval_vma(unsigned long vma, unsigned long asid)
+{
+	if (asid != FLUSH_TLB_NO_ASID)
+		asm volatile(SINVAL_VMA(%0, %1) : : "r" (vma), "r" (asid) : "memory");
+	else
+		asm volatile(SINVAL_VMA(%0, zero) : : "r" (vma) : "memory");
+}
 
 /*
  * Flush entire TLB if number of entries to be flushed is greater
@@ -27,6 +48,16 @@ static void local_flush_tlb_range_threshold_asid(unsigned long start,
 		return;
 	}
 
+	if (has_svinval()) {
+		local_sfence_w_inval();
+		for (i = 0; i < nr_ptes_in_range; ++i) {
+			local_sinval_vma(start, asid);
+			start += stride;
+		}
+		local_sfence_inval_ir();
+		return;
+	}
+
 	for (i = 0; i < nr_ptes_in_range; ++i) {
 		local_flush_tlb_page_asid(start, asid);
 		start += stride;
@@ -182,6 +213,13 @@ void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	__flush_tlb_range(vma->vm_mm, mm_cpumask(vma->vm_mm),
 			  start, end - start, PMD_SIZE);
 }
+
+void flush_pud_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			 unsigned long end)
+{
+	__flush_tlb_range(vma->vm_mm, mm_cpumask(vma->vm_mm),
+			  start, end - start, PUD_SIZE);
+}
 #endif
 
 bool arch_tlbbatch_should_defer(struct mm_struct *mm)
diff --git linux-libre-6.15-gnu/arch/riscv/net/bpf_jit.h linux-libre-6.16-gnu/arch/riscv/net/bpf_jit.h
index 1d1c78d4cff1..e7b032dfd17f 100644
--- linux-libre-6.15-gnu/arch/riscv/net/bpf_jit.h
+++ linux-libre-6.16-gnu/arch/riscv/net/bpf_jit.h
@@ -608,6 +608,21 @@ static inline u32 rv_fence(u8 pred, u8 succ)
 	return rv_i_insn(imm11_0, 0, 0, 0, 0xf);
 }
 
+static inline void emit_fence_r_rw(struct rv_jit_context *ctx)
+{
+	emit(rv_fence(0x2, 0x3), ctx);
+}
+
+static inline void emit_fence_rw_w(struct rv_jit_context *ctx)
+{
+	emit(rv_fence(0x3, 0x1), ctx);
+}
+
+static inline void emit_fence_rw_rw(struct rv_jit_context *ctx)
+{
+	emit(rv_fence(0x3, 0x3), ctx);
+}
+
 static inline u32 rv_nop(void)
 {
 	return rv_i_insn(0, 0, 0, 0, 0x13);
diff --git linux-libre-6.15-gnu/arch/riscv/net/bpf_jit_comp64.c linux-libre-6.16-gnu/arch/riscv/net/bpf_jit_comp64.c
index ca60db75199d..10e01ff06312 100644
--- linux-libre-6.15-gnu/arch/riscv/net/bpf_jit_comp64.c
+++ linux-libre-6.16-gnu/arch/riscv/net/bpf_jit_comp64.c
@@ -473,11 +473,212 @@ static inline void emit_kcfi(u32 hash, struct rv_jit_context *ctx)
 		emit(hash, ctx);
 }
 
-static void emit_atomic(u8 rd, u8 rs, s16 off, s32 imm, bool is64,
-			struct rv_jit_context *ctx)
+static int emit_load_8(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	int insns_start;
+
+	if (is_12b_int(off)) {
+		insns_start = ctx->ninsns;
+		if (sign_ext)
+			emit(rv_lb(rd, off, rs), ctx);
+		else
+			emit(rv_lbu(rd, off, rs), ctx);
+		return ctx->ninsns - insns_start;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
+	insns_start = ctx->ninsns;
+	if (sign_ext)
+		emit(rv_lb(rd, 0, RV_REG_T1), ctx);
+	else
+		emit(rv_lbu(rd, 0, RV_REG_T1), ctx);
+	return ctx->ninsns - insns_start;
+}
+
+static int emit_load_16(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	int insns_start;
+
+	if (is_12b_int(off)) {
+		insns_start = ctx->ninsns;
+		if (sign_ext)
+			emit(rv_lh(rd, off, rs), ctx);
+		else
+			emit(rv_lhu(rd, off, rs), ctx);
+		return ctx->ninsns - insns_start;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
+	insns_start = ctx->ninsns;
+	if (sign_ext)
+		emit(rv_lh(rd, 0, RV_REG_T1), ctx);
+	else
+		emit(rv_lhu(rd, 0, RV_REG_T1), ctx);
+	return ctx->ninsns - insns_start;
+}
+
+static int emit_load_32(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	int insns_start;
+
+	if (is_12b_int(off)) {
+		insns_start = ctx->ninsns;
+		if (sign_ext)
+			emit(rv_lw(rd, off, rs), ctx);
+		else
+			emit(rv_lwu(rd, off, rs), ctx);
+		return ctx->ninsns - insns_start;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
+	insns_start = ctx->ninsns;
+	if (sign_ext)
+		emit(rv_lw(rd, 0, RV_REG_T1), ctx);
+	else
+		emit(rv_lwu(rd, 0, RV_REG_T1), ctx);
+	return ctx->ninsns - insns_start;
+}
+
+static int emit_load_64(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	int insns_start;
+
+	if (is_12b_int(off)) {
+		insns_start = ctx->ninsns;
+		emit_ld(rd, off, rs, ctx);
+		return ctx->ninsns - insns_start;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
+	insns_start = ctx->ninsns;
+	emit_ld(rd, 0, RV_REG_T1, ctx);
+	return ctx->ninsns - insns_start;
+}
+
+static void emit_store_8(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	if (is_12b_int(off)) {
+		emit(rv_sb(rd, off, rs), ctx);
+		return;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
+	emit(rv_sb(RV_REG_T1, 0, rs), ctx);
+}
+
+static void emit_store_16(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	if (is_12b_int(off)) {
+		emit(rv_sh(rd, off, rs), ctx);
+		return;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
+	emit(rv_sh(RV_REG_T1, 0, rs), ctx);
+}
+
+static void emit_store_32(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	if (is_12b_int(off)) {
+		emit_sw(rd, off, rs, ctx);
+		return;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
+	emit_sw(RV_REG_T1, 0, rs, ctx);
+}
+
+static void emit_store_64(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+{
+	if (is_12b_int(off)) {
+		emit_sd(rd, off, rs, ctx);
+		return;
+	}
+
+	emit_imm(RV_REG_T1, off, ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
+	emit_sd(RV_REG_T1, 0, rs, ctx);
+}
+
+static int emit_atomic_ld_st(u8 rd, u8 rs, const struct bpf_insn *insn,
+			     struct rv_jit_context *ctx)
+{
+	u8 code = insn->code;
+	s32 imm = insn->imm;
+	s16 off = insn->off;
+
+	switch (imm) {
+	/* dst_reg = load_acquire(src_reg + off16) */
+	case BPF_LOAD_ACQ:
+		switch (BPF_SIZE(code)) {
+		case BPF_B:
+			emit_load_8(false, rd, off, rs, ctx);
+			break;
+		case BPF_H:
+			emit_load_16(false, rd, off, rs, ctx);
+			break;
+		case BPF_W:
+			emit_load_32(false, rd, off, rs, ctx);
+			break;
+		case BPF_DW:
+			emit_load_64(false, rd, off, rs, ctx);
+			break;
+		}
+		emit_fence_r_rw(ctx);
+
+		/* If our next insn is a redundant zext, return 1 to tell
+		 * build_body() to skip it.
+		 */
+		if (BPF_SIZE(code) != BPF_DW && insn_is_zext(&insn[1]))
+			return 1;
+		break;
+	/* store_release(dst_reg + off16, src_reg) */
+	case BPF_STORE_REL:
+		emit_fence_rw_w(ctx);
+		switch (BPF_SIZE(code)) {
+		case BPF_B:
+			emit_store_8(rd, off, rs, ctx);
+			break;
+		case BPF_H:
+			emit_store_16(rd, off, rs, ctx);
+			break;
+		case BPF_W:
+			emit_store_32(rd, off, rs, ctx);
+			break;
+		case BPF_DW:
+			emit_store_64(rd, off, rs, ctx);
+			break;
+		}
+		break;
+	default:
+		pr_err_once("bpf-jit: invalid atomic load/store opcode %02x\n", imm);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int emit_atomic_rmw(u8 rd, u8 rs, const struct bpf_insn *insn,
+			   struct rv_jit_context *ctx)
 {
-	u8 r0;
+	u8 r0, code = insn->code;
+	s16 off = insn->off;
+	s32 imm = insn->imm;
 	int jmp_offset;
+	bool is64;
+
+	if (BPF_SIZE(code) != BPF_W && BPF_SIZE(code) != BPF_DW) {
+		pr_err_once("bpf-jit: 1- and 2-byte RMW atomics are not supported\n");
+		return -EINVAL;
+	}
+	is64 = BPF_SIZE(code) == BPF_DW;
 
 	if (off) {
 		if (is_12b_int(off)) {
@@ -554,9 +755,14 @@ static void emit_atomic(u8 rd, u8 rs, s16 off, s32 imm, bool is64,
 		     rv_sc_w(RV_REG_T3, rs, rd, 0, 1), ctx);
 		jmp_offset = ninsns_rvoff(-6);
 		emit(rv_bne(RV_REG_T3, 0, jmp_offset >> 1), ctx);
-		emit(rv_fence(0x3, 0x3), ctx);
+		emit_fence_rw_rw(ctx);
 		break;
+	default:
+		pr_err_once("bpf-jit: invalid atomic RMW opcode %02x\n", imm);
+		return -EINVAL;
 	}
+
+	return 0;
 }
 
 #define BPF_FIXUP_OFFSET_MASK   GENMASK(26, 0)
@@ -1650,8 +1856,8 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
 	{
-		int insn_len, insns_start;
 		bool sign_ext;
+		int insn_len;
 
 		sign_ext = BPF_MODE(insn->code) == BPF_MEMSX ||
 			   BPF_MODE(insn->code) == BPF_PROBE_MEMSX;
@@ -1663,78 +1869,16 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 
 		switch (BPF_SIZE(code)) {
 		case BPF_B:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				if (sign_ext)
-					emit(rv_lb(rd, off, rs), ctx);
-				else
-					emit(rv_lbu(rd, off, rs), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-			insns_start = ctx->ninsns;
-			if (sign_ext)
-				emit(rv_lb(rd, 0, RV_REG_T1), ctx);
-			else
-				emit(rv_lbu(rd, 0, RV_REG_T1), ctx);
-			insn_len = ctx->ninsns - insns_start;
+			insn_len = emit_load_8(sign_ext, rd, off, rs, ctx);
 			break;
 		case BPF_H:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				if (sign_ext)
-					emit(rv_lh(rd, off, rs), ctx);
-				else
-					emit(rv_lhu(rd, off, rs), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-			insns_start = ctx->ninsns;
-			if (sign_ext)
-				emit(rv_lh(rd, 0, RV_REG_T1), ctx);
-			else
-				emit(rv_lhu(rd, 0, RV_REG_T1), ctx);
-			insn_len = ctx->ninsns - insns_start;
+			insn_len = emit_load_16(sign_ext, rd, off, rs, ctx);
 			break;
 		case BPF_W:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				if (sign_ext)
-					emit(rv_lw(rd, off, rs), ctx);
-				else
-					emit(rv_lwu(rd, off, rs), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-			insns_start = ctx->ninsns;
-			if (sign_ext)
-				emit(rv_lw(rd, 0, RV_REG_T1), ctx);
-			else
-				emit(rv_lwu(rd, 0, RV_REG_T1), ctx);
-			insn_len = ctx->ninsns - insns_start;
+			insn_len = emit_load_32(sign_ext, rd, off, rs, ctx);
 			break;
 		case BPF_DW:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit_ld(rd, off, rs, ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-			insns_start = ctx->ninsns;
-			emit_ld(rd, 0, RV_REG_T1, ctx);
-			insn_len = ctx->ninsns - insns_start;
+			insn_len = emit_load_64(sign_ext, rd, off, rs, ctx);
 			break;
 		}
 
@@ -1879,49 +2023,27 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 
 	/* STX: *(size *)(dst + off) = src */
 	case BPF_STX | BPF_MEM | BPF_B:
-		if (is_12b_int(off)) {
-			emit(rv_sb(rd, off, rs), ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T1, off, ctx);
-		emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-		emit(rv_sb(RV_REG_T1, 0, rs), ctx);
+		emit_store_8(rd, off, rs, ctx);
 		break;
 	case BPF_STX | BPF_MEM | BPF_H:
-		if (is_12b_int(off)) {
-			emit(rv_sh(rd, off, rs), ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T1, off, ctx);
-		emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-		emit(rv_sh(RV_REG_T1, 0, rs), ctx);
+		emit_store_16(rd, off, rs, ctx);
 		break;
 	case BPF_STX | BPF_MEM | BPF_W:
-		if (is_12b_int(off)) {
-			emit_sw(rd, off, rs, ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T1, off, ctx);
-		emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-		emit_sw(RV_REG_T1, 0, rs, ctx);
+		emit_store_32(rd, off, rs, ctx);
 		break;
 	case BPF_STX | BPF_MEM | BPF_DW:
-		if (is_12b_int(off)) {
-			emit_sd(rd, off, rs, ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T1, off, ctx);
-		emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-		emit_sd(RV_REG_T1, 0, rs, ctx);
+		emit_store_64(rd, off, rs, ctx);
 		break;
+	case BPF_STX | BPF_ATOMIC | BPF_B:
+	case BPF_STX | BPF_ATOMIC | BPF_H:
 	case BPF_STX | BPF_ATOMIC | BPF_W:
 	case BPF_STX | BPF_ATOMIC | BPF_DW:
-		emit_atomic(rd, rs, off, imm,
-			    BPF_SIZE(code) == BPF_DW, ctx);
+		if (bpf_atomic_is_load_store(insn))
+			ret = emit_atomic_ld_st(rd, rs, insn, ctx);
+		else
+			ret = emit_atomic_rmw(rd, rs, insn, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
diff --git linux-libre-6.15-gnu/arch/riscv/net/bpf_jit_core.c linux-libre-6.16-gnu/arch/riscv/net/bpf_jit_core.c
index f8cd2f70a7fb..f6ca5cfa6b2f 100644
--- linux-libre-6.15-gnu/arch/riscv/net/bpf_jit_core.c
+++ linux-libre-6.16-gnu/arch/riscv/net/bpf_jit_core.c
@@ -26,9 +26,8 @@ static int build_body(struct rv_jit_context *ctx, bool extra_pass, int *offset)
 		int ret;
 
 		ret = bpf_jit_emit_insn(insn, ctx, extra_pass);
-		/* BPF_LD | BPF_IMM | BPF_DW: skip the next instruction. */
 		if (ret > 0)
-			i++;
+			i++; /* skip the next instruction */
 		if (offset)
 			offset[i] = ctx->ninsns;
 		if (ret < 0)
diff --git linux-libre-6.15-gnu/arch/riscv/tools/relocs_check.sh linux-libre-6.16-gnu/arch/riscv/tools/relocs_check.sh
index baeb2e7b2290..742993e6a8cb 100755
--- linux-libre-6.15-gnu/arch/riscv/tools/relocs_check.sh
+++ linux-libre-6.16-gnu/arch/riscv/tools/relocs_check.sh
@@ -14,7 +14,9 @@ bad_relocs=$(
 ${srctree}/scripts/relocs_check.sh "$@" |
 	# These relocations are okay
 	#	R_RISCV_RELATIVE
-	grep -F -w -v 'R_RISCV_RELATIVE'
+	#	R_RISCV_NONE
+	grep -F -w -v 'R_RISCV_RELATIVE
+R_RISCV_NONE'
 )
 
 if [ -z "$bad_relocs" ]; then
diff --git linux-libre-6.15-gnu/arch/s390/Kconfig linux-libre-6.16-gnu/arch/s390/Kconfig
index 99fb986fca6e..0c16dc443e2f 100644
--- linux-libre-6.15-gnu/arch/s390/Kconfig
+++ linux-libre-6.16-gnu/arch/s390/Kconfig
@@ -146,6 +146,7 @@ config S390
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	select ARCH_WANT_KERNEL_PMD_MKWRITE
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
diff --git linux-libre-6.15-gnu/arch/s390/boot/ipl_parm.c linux-libre-6.16-gnu/arch/s390/boot/ipl_parm.c
index d04e9b89d14a..f584d7da29cb 100644
--- linux-libre-6.15-gnu/arch/s390/boot/ipl_parm.c
+++ linux-libre-6.16-gnu/arch/s390/boot/ipl_parm.c
@@ -179,7 +179,7 @@ void setup_boot_command_line(void)
 	if (has_ebcdic_char(parmarea.command_line))
 		EBCASC(parmarea.command_line, COMMAND_LINE_SIZE);
 	/* copy arch command line */
-	strcpy(early_command_line, strim(parmarea.command_line));
+	strscpy(early_command_line, strim(parmarea.command_line));
 
 	/* append IPL PARM data to the boot command line */
 	if (!is_prot_virt_guest() && ipl_block_valid)
@@ -253,7 +253,8 @@ void parse_boot_command_line(void)
 	int rc;
 
 	__kaslr_enabled = IS_ENABLED(CONFIG_RANDOMIZE_BASE);
-	args = strcpy(command_line_buf, early_command_line);
+	strscpy(command_line_buf, early_command_line);
+	args = command_line_buf;
 	while (*args) {
 		args = next_arg(args, &param, &val);
 
@@ -309,7 +310,7 @@ void parse_boot_command_line(void)
 		if (!strcmp(param, "bootdebug")) {
 			bootdebug = true;
 			if (val)
-				strncpy(bootdebug_filter, val, sizeof(bootdebug_filter) - 1);
+				strscpy(bootdebug_filter, val);
 		}
 		if (!strcmp(param, "quiet"))
 			boot_console_loglevel = CONSOLE_LOGLEVEL_QUIET;
diff --git linux-libre-6.15-gnu/arch/s390/boot/printk.c linux-libre-6.16-gnu/arch/s390/boot/printk.c
index 8cf6331bc060..4bb6bc95704e 100644
--- linux-libre-6.15-gnu/arch/s390/boot/printk.c
+++ linux-libre-6.16-gnu/arch/s390/boot/printk.c
@@ -29,7 +29,8 @@ static void boot_rb_add(const char *str, size_t len)
 	/* store strings separated by '\0' */
 	if (len + 1 > avail)
 		boot_rb_off = 0;
-	strcpy(boot_rb + boot_rb_off, str);
+	avail = sizeof(boot_rb) - boot_rb_off - 1;
+	strscpy(boot_rb + boot_rb_off, str, avail);
 	boot_rb_off += len + 1;
 }
 
@@ -158,10 +159,10 @@ static noinline char *strsym(char *buf, void *ip)
 
 	p = findsym((unsigned long)ip, &off, &len);
 	if (p) {
-		strncpy(buf, p, MAX_SYMLEN);
+		strscpy(buf, p, MAX_SYMLEN);
 		/* reserve 15 bytes for offset/len in symbol+0x1234/0x1234 */
 		p = buf + strnlen(buf, MAX_SYMLEN - 15);
-		strcpy(p, "+0x");
+		strscpy(p, "+0x", MAX_SYMLEN - (p - buf));
 		as_hex(p + 3, off, 0);
 		strcat(p, "/0x");
 		as_hex(p + strlen(p), len, 0);
diff --git linux-libre-6.15-gnu/arch/s390/boot/startup.c linux-libre-6.16-gnu/arch/s390/boot/startup.c
index 06316fb8e0fa..da8337e63a3e 100644
--- linux-libre-6.15-gnu/arch/s390/boot/startup.c
+++ linux-libre-6.16-gnu/arch/s390/boot/startup.c
@@ -6,6 +6,7 @@
 #include <asm/boot_data.h>
 #include <asm/extmem.h>
 #include <asm/sections.h>
+#include <asm/diag288.h>
 #include <asm/maccess.h>
 #include <asm/machine.h>
 #include <asm/sysinfo.h>
@@ -71,6 +72,20 @@ static void detect_machine_type(void)
 		set_machine_feature(MFEATURE_VM);
 }
 
+static void detect_diag288(void)
+{
+	/* "BEGIN" in EBCDIC character set */
+	static const char cmd[] = "\xc2\xc5\xc7\xc9\xd5";
+	unsigned long action, len;
+
+	action = machine_is_vm() ? (unsigned long)cmd : LPARWDT_RESTART;
+	len = machine_is_vm() ? sizeof(cmd) : 0;
+	if (__diag288(WDT_FUNC_INIT, MIN_INTERVAL, action, len))
+		return;
+	__diag288(WDT_FUNC_CANCEL, 0, 0, 0);
+	set_machine_feature(MFEATURE_DIAG288);
+}
+
 static void detect_diag9c(void)
 {
 	unsigned int cpu;
@@ -519,6 +534,8 @@ void startup_kernel(void)
 	detect_facilities();
 	detect_diag9c();
 	detect_machine_type();
+	/* detect_diag288() needs machine type */
+	detect_diag288();
 	cmma_init();
 	sanitize_prot_virt_host();
 	max_physmem_end = detect_max_physmem_end();
diff --git linux-libre-6.15-gnu/arch/s390/boot/string.c linux-libre-6.16-gnu/arch/s390/boot/string.c
index f6b9b1df48a8..bd68161434a6 100644
--- linux-libre-6.15-gnu/arch/s390/boot/string.c
+++ linux-libre-6.16-gnu/arch/s390/boot/string.c
@@ -29,6 +29,18 @@ int strncmp(const char *cs, const char *ct, size_t count)
 	return 0;
 }
 
+ssize_t sized_strscpy(char *dst, const char *src, size_t count)
+{
+	size_t len;
+
+	if (count == 0)
+		return -E2BIG;
+	len = strnlen(src, count - 1);
+	memcpy(dst, src, len);
+	dst[len] = '\0';
+	return src[len] ? -E2BIG : len;
+}
+
 void *memset64(uint64_t *s, uint64_t v, size_t count)
 {
 	uint64_t *xs = s;
diff --git linux-libre-6.15-gnu/arch/s390/configs/debug_defconfig linux-libre-6.16-gnu/arch/s390/configs/debug_defconfig
index 24b22f6a9e99..8ecad727497e 100644
--- linux-libre-6.15-gnu/arch/s390/configs/debug_defconfig
+++ linux-libre-6.16-gnu/arch/s390/configs/debug_defconfig
@@ -755,10 +755,10 @@ CONFIG_FORTIFY_SOURCE=y
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_USER=m
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
@@ -806,7 +806,6 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_SHA1_S390=m
-CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA3_256_S390=m
 CONFIG_CRYPTO_SHA3_512_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
diff --git linux-libre-6.15-gnu/arch/s390/configs/defconfig linux-libre-6.16-gnu/arch/s390/configs/defconfig
index 2b8b42d569bc..c13a77765162 100644
--- linux-libre-6.15-gnu/arch/s390/configs/defconfig
+++ linux-libre-6.16-gnu/arch/s390/configs/defconfig
@@ -741,10 +741,10 @@ CONFIG_IMA_APPRAISE=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_USER=m
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
@@ -793,7 +793,6 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_SHA1_S390=m
-CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA3_256_S390=m
 CONFIG_CRYPTO_SHA3_512_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
diff --git linux-libre-6.15-gnu/arch/s390/crypto/Kconfig linux-libre-6.16-gnu/arch/s390/crypto/Kconfig
index 8c4db8b64fa2..e2c27588b21a 100644
--- linux-libre-6.15-gnu/arch/s390/crypto/Kconfig
+++ linux-libre-6.16-gnu/arch/s390/crypto/Kconfig
@@ -4,7 +4,6 @@ menu "Accelerated Cryptographic Algorithms for CPU (s390)"
 
 config CRYPTO_SHA512_S390
 	tristate "Hash functions: SHA-384 and SHA-512"
-	depends on S390
 	select CRYPTO_HASH
 	help
 	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
@@ -15,7 +14,6 @@ config CRYPTO_SHA512_S390
 
 config CRYPTO_SHA1_S390
 	tristate "Hash functions: SHA-1"
-	depends on S390
 	select CRYPTO_HASH
 	help
 	  SHA-1 secure hash algorithm (FIPS 180)
@@ -24,20 +22,8 @@ config CRYPTO_SHA1_S390
 
 	  It is available as of z990.
 
-config CRYPTO_SHA256_S390
-	tristate "Hash functions: SHA-224 and SHA-256"
-	depends on S390
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: s390
-
-	  It is available as of z9.
-
 config CRYPTO_SHA3_256_S390
 	tristate "Hash functions: SHA3-224 and SHA3-256"
-	depends on S390
 	select CRYPTO_HASH
 	help
 	  SHA3-224 and SHA3-256 secure hash algorithms (FIPS 202)
@@ -48,7 +34,6 @@ config CRYPTO_SHA3_256_S390
 
 config CRYPTO_SHA3_512_S390
 	tristate "Hash functions: SHA3-384 and SHA3-512"
-	depends on S390
 	select CRYPTO_HASH
 	help
 	  SHA3-384 and SHA3-512 secure hash algorithms (FIPS 202)
@@ -59,7 +44,6 @@ config CRYPTO_SHA3_512_S390
 
 config CRYPTO_GHASH_S390
 	tristate "Hash functions: GHASH"
-	depends on S390
 	select CRYPTO_HASH
 	help
 	  GCM GHASH hash function (NIST SP800-38D)
@@ -70,7 +54,6 @@ config CRYPTO_GHASH_S390
 
 config CRYPTO_AES_S390
 	tristate "Ciphers: AES, modes: ECB, CBC, CTR, XTS, GCM"
-	depends on S390
 	select CRYPTO_ALGAPI
 	select CRYPTO_SKCIPHER
 	help
@@ -92,7 +75,6 @@ config CRYPTO_AES_S390
 
 config CRYPTO_DES_S390
 	tristate "Ciphers: DES and Triple DES EDE, modes: ECB, CBC, CTR"
-	depends on S390
 	select CRYPTO_ALGAPI
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_DES
@@ -107,23 +89,8 @@ config CRYPTO_DES_S390
 	  As of z990 the ECB and CBC mode are hardware accelerated.
 	  As of z196 the CTR mode is hardware accelerated.
 
-config CRYPTO_CHACHA_S390
-	tristate
-	depends on S390
