diff --git linux-libre-5.4-gnu1/Documentation/ABI/stable/sysfs-driver-mlxreg-io linux-libre-5.4.261-gnu1/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 8ca498447aeb..05601a90a9b6 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -29,13 +29,13 @@ Description:	This file shows the system fans direction:
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
-		on LED board.
+		on LED or Gearbox board.
 
 		The files are read only.
 
@@ -121,6 +121,15 @@ Description:	These files show the system reset cause, as following: ComEx
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/evm linux-libre-5.4.261-gnu1/Documentation/ABI/testing/evm
index 201d10319fa1..1df1177df68a 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/evm
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/evm
@@ -42,8 +42,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-ata linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..299e0d1dc161 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-ata
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-ata
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-iio linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-iio
index 680451695422..4d873e813949 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-iio
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-iio
@@ -138,7 +138,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1566,7 +1566,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610 linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-mei linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-mei
index 6bd45346ac7e..3f8701e8fa24 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-bus-mei
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-bus-mei
@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-class-devfreq linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
index 01196e19afca..75897e2fde43 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-class-devfreq
@@ -7,6 +7,13 @@ Description:
 		The name of devfreq object denoted as ... is same as the
 		name of device using devfreq.
 
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
 What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
index fc20cde63d1e..08e153614e09 100644
--- linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -480,14 +480,17 @@ Description:	information about CPUs heterogeneity.
 		cpu_capacity: capacity of cpu#.
 
 What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
-		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
-		/sys/devices/system/cpu/vulnerabilities/l1tf
-		/sys/devices/system/cpu/vulnerabilities/mds
+		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
-		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git linux-libre-5.4-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git linux-libre-5.4-gnu1/Documentation/accounting/psi.rst linux-libre-5.4.261-gnu1/Documentation/accounting/psi.rst
index 621111ce5740..28c0461ba2e1 100644
--- linux-libre-5.4-gnu1/Documentation/accounting/psi.rst
+++ linux-libre-5.4.261-gnu1/Documentation/accounting/psi.rst
@@ -90,7 +90,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
index 0ae4f564c2d6..6ec63c239616 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -82,6 +82,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -745,8 +747,15 @@ NOTE2:
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
index a30aa91b5fbe..3463883844c0 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -177,6 +177,12 @@ bitmap_flush_interval:number
 	The bitmap flush interval in milliseconds. The metadata buffers
 	are synchronized when this interval expires.
 
+legacy_recalculate
+	Allow recalculating of volumes with HMAC keys. This is disabled by
+	default for security reasons - an attacker could modify the volume,
+	set recalc_sector to zero, and the kernel would not detect the
+	modification.
+
 
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
 be changed when reloading the target (load an inactive table and swap the
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/device-mapper/index.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/device-mapper/index.rst
index c77c58b8f67b..d8dec8911eb3 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/device-mapper/index.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/device-mapper/index.rst
@@ -8,6 +8,7 @@ Device Mapper
     cache-policies
     cache
     delay
+    dm-clone
     dm-crypt
     dm-flakey
     dm-init
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/devices.txt linux-libre-5.4.261-gnu1/Documentation/admin-guide/devices.txt
index 1c5d2281efc9..771d9e7ae082 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/devices.txt
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/devices.txt
@@ -3002,10 +3002,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
new file mode 100644
index 000000000000..264bfa937f7d
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+GDS - Gather Data Sampling
+==========================
+
+Gather Data Sampling is a hardware vulnerability which allows unprivileged
+speculative access to data which was previously stored in vector registers.
+
+Problem
+-------
+When a gather instruction performs loads from memory, different data elements
+are merged into the destination vector register. However, when a gather
+instruction that is transiently executed encounters a fault, stale data from
+architectural or internal vector registers may get transiently forwarded to the
+destination vector register instead. This will allow a malicious attacker to
+infer stale data using typical side channel techniques like cache timing
+attacks. GDS is a purely sampling-based attack.
+
+The attacker uses gather instructions to infer the stale vector register data.
+The victim does not need to do anything special other than use the vector
+registers. The victim does not need to use gather instructions to be
+vulnerable.
+
+Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks
+are possible.
+
+Attack scenarios
+----------------
+Without mitigation, GDS can infer stale data across virtually all
+permission boundaries:
+
+	Non-enclaves can infer SGX enclave data
+	Userspace can infer kernel data
+	Guests can infer data from hosts
+	Guest can infer guest from other guests
+	Users can infer data from other users
+
+Because of this, it is important to ensure that the mitigation stays enabled in
+lower-privilege contexts like guests and when running outside SGX enclaves.
+
+The hardware enforces the mitigation for SGX. Likewise, VMMs should  ensure
+that guests are not allowed to disable the GDS mitigation. If a host erred and
+allowed this, a guest could theoretically disable GDS mitigation, mount an
+attack, and re-enable it.
+
+Mitigation mechanism
+--------------------
+This issue is mitigated in microcode. The microcode defines the following new
+bits:
+
+ ================================   ===   ============================
+ IA32_ARCH_CAPABILITIES[GDS_CTRL]   R/O   Enumerates GDS vulnerability
+                                          and mitigation support.
+ IA32_ARCH_CAPABILITIES[GDS_NO]     R/O   Processor is not vulnerable.
+ IA32_MCU_OPT_CTRL[GDS_MITG_DIS]    R/W   Disables the mitigation
+                                          0 by default.
+ IA32_MCU_OPT_CTRL[GDS_MITG_LOCK]   R/W   Locks GDS_MITG_DIS=0. Writes
+                                          to GDS_MITG_DIS are ignored
+                                          Can't be cleared once set.
+ ================================   ===   ============================
+
+GDS can also be mitigated on systems that don't have updated microcode by
+disabling AVX. This can be done by setting gather_data_sampling="force" or
+"clearcpuid=avx" on the kernel command-line.
+
+If used, these options will disable AVX use by turning off XSAVE YMM support.
+However, the processor will still enumerate AVX support.  Userspace that
+does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM
+support will break.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The mitigation can be disabled by setting "gather_data_sampling=off" or
+"mitigations=off" on the kernel command line. Not specifying either will default
+to the mitigation being enabled. Specifying "gather_data_sampling=force" will
+use the microcode mitigation when available or disable AVX on affected systems
+where the microcode hasn't been updated to include the mitigation.
+
+GDS System Information
+------------------------
+The kernel provides vulnerability status information through sysfs. For
+GDS this can be accessed by the following sysfs file:
+
+/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable.
+ Vulnerable                     Processor vulnerable and mitigation disabled.
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation.
+ Mitigation: AVX disabled,
+ no microcode                   Processor is vulnerable and microcode is missing
+                                mitigation. AVX disabled as mitigation.
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in
+                                effect and cannot be disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on a virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+GDS Default mitigation
+----------------------
+The updated microcode will enable the mitigation by default. The kernel's
+default action is to leave the mitigation enabled.
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/index.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/index.rst
index 0795e3c2643f..245468b0f2be 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/index.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/index.rst
@@ -14,3 +14,6 @@ are configurable at compile, boot or run time.
    mds
    tsx_async_abort
    multihit.rst
+   special-register-buffer-data-sampling.rst
+   processor_mmio_stale_data.rst
+   gather_data_sampling.rst
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/mds.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/mds.rst
index e3a796c0d3a2..2d19c9f4c1fe 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/mds.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/mds.rst
@@ -265,8 +265,11 @@ time with the option "mds=". The valid arguments for this option are:
 
   ============  =============================================================
 
-Not specifying this option is equivalent to "mds=full".
-
+Not specifying this option is equivalent to "mds=full". For processors
+that are affected by both TAA (TSX Asynchronous Abort) and MDS,
+specifying just "mds=off" without an accompanying "tsx_async_abort=off"
+will have no effect as the same mitigation is used for both
+vulnerabilities.
 
 Mitigation selection guide
 --------------------------
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+	mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
new file mode 100644
index 000000000000..47b1b3afac99
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst
@@ -0,0 +1,149 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SRBDS - Special Register Buffer Data Sampling
+=============================================
+
+SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
+infer values returned from special register accesses.  Special register
+accesses are accesses to off core registers.  According to Intel's evaluation,
+the special register reads that have a security expectation of privacy are
+RDRAND, RDSEED and SGX EGETKEY.
+
+When RDRAND, RDSEED and EGETKEY instructions are used, the data is moved
+to the core through the special register mechanism that is susceptible
+to MDS attacks.
+
+Affected processors
+--------------------
+Core models (desktop, mobile, Xeon-E3) that implement RDRAND and/or RDSEED may
+be affected.
+
+A processor is affected by SRBDS if its Family_Model and stepping is
+in the following list, with the exception of the listed processors
+exporting MDS_NO while Intel TSX is available yet not enabled. The
+latter class of processors are only affected when Intel TSX is enabled
+by software using TSX_CTRL_MSR otherwise they are not affected.
+
+  =============  ============  ========
+  common name    Family_Model  Stepping
+  =============  ============  ========
+  IvyBridge      06_3AH        All
+
+  Haswell        06_3CH        All
+  Haswell_L      06_45H        All
+  Haswell_G      06_46H        All
+
+  Broadwell_G    06_47H        All
+  Broadwell      06_3DH        All
+
+  Skylake_L      06_4EH        All
+  Skylake        06_5EH        All
+
+  Kabylake_L     06_8EH        <= 0xC
+  Kabylake       06_9EH        <= 0xD
+  =============  ============  ========
+
+Related CVEs
+------------
+
+The following CVE entry is related to this SRBDS issue:
+
+    ==============  =====  =====================================
+    CVE-2020-0543   SRBDS  Special Register Buffer Data Sampling
+    ==============  =====  =====================================
+
+Attack scenarios
+----------------
+An unprivileged user can extract values returned from RDRAND and RDSEED
+executed on another core or sibling thread using MDS techniques.
+
+
+Mitigation mechanism
+-------------------
+Intel will release microcode updates that modify the RDRAND, RDSEED, and
+EGETKEY instructions to overwrite secret special register data in the shared
+staging buffer before the secret data can be accessed by another logical
+processor.
+
+During execution of the RDRAND, RDSEED, or EGETKEY instructions, off-core
+accesses from other logical processors will be delayed until the special
+register read is complete and the secret data in the shared staging buffer is
+overwritten.
+
+This has three effects on performance:
+
+#. RDRAND, RDSEED, or EGETKEY instructions have higher latency.
+
+#. Executing RDRAND at the same time on multiple logical processors will be
+   serialized, resulting in an overall reduction in the maximum RDRAND
+   bandwidth.
+
+#. Executing RDRAND, RDSEED or EGETKEY will delay memory accesses from other
+   logical processors that miss their core caches, with an impact similar to
+   legacy locked cache-line-split accesses.
+
+The microcode updates provide an opt-out mechanism (RNGDS_MITG_DIS) to disable
+the mitigation for RDRAND and RDSEED instructions executed outside of Intel
+Software Guard Extensions (Intel SGX) enclaves. On logical processors that
+disable the mitigation using this opt-out mechanism, RDRAND and RDSEED do not
+take longer to execute and do not impact performance of sibling logical
+processors memory accesses. The opt-out mechanism does not affect Intel SGX
+enclaves (including execution of RDRAND or RDSEED inside an enclave, as well
+as EGETKEY execution).
+
+IA32_MCU_OPT_CTRL MSR Definition
+--------------------------------
+Along with the mitigation for this issue, Intel added a new thread-scope
+IA32_MCU_OPT_CTRL MSR, (address 0x123). The presence of this MSR and
+RNGDS_MITG_DIS (bit 0) is enumerated by CPUID.(EAX=07H,ECX=0).EDX[SRBDS_CTRL =
+9]==1. This MSR is introduced through the microcode update.
+
+Setting IA32_MCU_OPT_CTRL[0] (RNGDS_MITG_DIS) to 1 for a logical processor
+disables the mitigation for RDRAND and RDSEED executed outside of an Intel SGX
+enclave on that logical processor. Opting out of the mitigation for a
+particular logical processor does not affect the RDRAND and RDSEED mitigations
+for other logical processors.
+
+Note that inside of an Intel SGX enclave, the mitigation is applied regardless
+of the value of RNGDS_MITG_DS.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows control over the SRBDS mitigation at boot time
+with the option "srbds=".  The option for this is:
+
+  ============= =============================================================
+  off           This option disables SRBDS mitigation for RDRAND and RDSEED on
+                affected platforms.
+  ============= =============================================================
+
+SRBDS System Information
+-----------------------
+The Linux kernel provides vulnerability status information through sysfs.  For
+SRBDS this can be accessed by the following sysfs file:
+/sys/devices/system/cpu/vulnerabilities/srbds
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable
+ Vulnerable                     Processor vulnerable and mitigation disabled
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: TSX disabled       Processor is only vulnerable when TSX is
+                                enabled while this system was booted with TSX
+                                disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+SRBDS Default mitigation
+------------------------
+This new microcode serializes processor access during execution of RDRAND,
+RDSEED ensures that the shared buffer is overwritten before it is released for
+reuse.  Use the "srbds=off" kernel command line to disable the mitigation for
+RDRAND and RDSEED.
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..0fba3758d0da 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +422,14 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -456,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -468,7 +499,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -481,9 +512,12 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
@@ -584,12 +618,13 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   enhanced IBRS
+                eibrs,retpoline         enhanced IBRS + Retpolines
+                eibrs,lfence            enhanced IBRS + LFENCE
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +765,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
index fddbd7579c53..af6865b822d2 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
@@ -174,7 +174,10 @@ the option "tsx_async_abort=". The valid arguments for this option are:
                 CPU is not vulnerable to cross-thread TAA attacks.
   ============  =============================================================
 
-Not specifying this option is equivalent to "tsx_async_abort=full".
+Not specifying this option is equivalent to "tsx_async_abort=full". For
+processors that are affected by both TAA and MDS, specifying just
+"tsx_async_abort=off" without an accompanying "mds=off" will have no
+effect as the same mitigation is used for both vulnerabilities.
 
 The kernel command line also allows to control the TSX feature using the
 parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/iostats.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/iostats.rst
index 5d63b18bd6d1..60c45c916f7d 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/iostats.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/iostats.rst
@@ -99,7 +99,7 @@ Field 10 -- # of milliseconds spent doing I/Os
 
     Since 5.0 this field counts jiffies when at least one request was
     started or completed. If request runs more than 2 jiffies then some
-    I/O time will not be accounted unless there are other requests.
+    I/O time might be not accounted in case of concurrent requests.
 
 Field 11 -- weighted # of milliseconds spent doing I/Os
     This field is incremented at each I/O start, I/O completion, I/O
@@ -133,6 +133,9 @@ are summed (possibly overflowing the unsigned long variable they are
 summed to) and the result given to the user.  There is no convenient
 user interface for accessing the per-CPU counters themselves.
 
+Since 4.19 request times are measured with nanoseconds precision and
+truncated to milliseconds before showing in this interface.
+
 Disks vs Partitions
 -------------------
 
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.4.261-gnu1/Documentation/admin-guide/kernel-parameters.txt
index 8dee8f68fe15..51f845419b9c 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/kernel-parameters.txt
@@ -113,7 +113,7 @@
 			the GPE dispatcher.
 			This facility can be used to prevent such uncontrolled
 			GPE floodings.
-			Format: <int>
+			Format: <byte>
 
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
@@ -136,6 +136,10 @@
 			dynamic table installation which will install SSDT
 			tables to /sys/firmware/acpi/tables/dynamic.
 
+	acpi_no_watchdog	[HW,ACPI,WDT]
+			Ignore the ACPI-based watchdog interface (WDAT) and let
+			a native driver control the watchdog device instead.
+
 	acpi_rsdp=	[ACPI,EFI,KEXEC]
 			Pass the RSDP address to the kernel, mostly used
 			on machines running EFI runtime service to boot the
@@ -563,7 +567,13 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily
@@ -815,10 +825,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.txt.
-
 	default_hugepagesz=
 			[same as hugepagesz=] The size of the default
 			HugeTLB page size. This is the size represented by
@@ -1330,6 +1336,26 @@
 			Format: off | on
 			default: on
 
+	gather_data_sampling=
+			[X86,INTEL] Control the Gather Data Sampling (GDS)
+			mitigation.
+
+			Gather Data Sampling is a hardware vulnerability which
+			allows unprivileged speculative access to data which was
+			previously stored in vector registers.
+
+			This issue is mitigated by default in updated microcode.
+			The mitigation may have a performance impact but can be
+			disabled. On systems without the microcode mitigation
+			disabling AVX serves as a mitigation.
+
+			force:	Disable AVX to mitigate systems without
+				microcode mitigation. No effect if the microcode
+				mitigation is present. Known to cause crashes in
+				userspace with buggy AVX enumeration.
+
+			off:    Disable GDS mitigation.
+
 	gcov_persist=	[GCOV] When non-zero (default), profiling data for
 			kernel modules is saved and remains accessible via
 			debugfs, even when the module is unloaded/reloaded.
@@ -1477,6 +1503,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -1932,24 +1960,57 @@
 
 	ivrs_ioapic	[HW,X86_64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86_64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86_64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
+
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
@@ -2102,8 +2163,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2473,6 +2538,12 @@
 				     SMT on vulnerable CPUs
 			off        - Unconditionally disable MDS mitigation
 
+			On TAA-affected machines, mds=off can be prevented by
+			an active TAA mitigation as both vulnerabilities are
+			mitigated with the same mechanism so in order to disable
+			this mitigation, you need to specify tsx_async_abort=off
+			too.
+
 			Not specifying this option is equivalent to
 			mds=full.
 
@@ -2645,18 +2716,22 @@
 				Disable all optional CPU mitigations.  This
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
-				Equivalent to: nopti [X86,PPC]
+				Equivalent to: gather_data_sampling=off [X86]
 					       kpti=0 [ARM64]
-					       nospectre_v1 [X86,PPC]
+					       kvm.nx_huge_pages=off [X86]
+					       l1tf=off [X86]
+					       mds=off [X86]
+					       mmio_stale_data=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 					       nobp=0 [S390]
+					       nopti [X86,PPC]
+					       nospectre_v1 [X86,PPC]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
-					       spectre_v2_user=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_v2_user=off [X86]
 					       ssbd=force-off [ARM64]
-					       l1tf=off [X86]
-					       mds=off [X86]
 					       tsx_async_abort=off [X86]
-					       kvm.nx_huge_pages=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -2678,6 +2753,7 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -2687,6 +2763,40 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -2731,7 +2841,7 @@
 			<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
 
 	mtdparts=	[MTD]
-			See drivers/mtd/cmdlinepart.c.
+			See drivers/mtd/parsers/cmdlinepart.c
 
 	multitce=off	[PPC]  This parameter disables the use of the pSeries
 			firmware feature for updating multiple TCE entries
@@ -2979,6 +3089,8 @@
 
 	noefi		Disable EFI runtime services support.
 
+	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+
 	noexec		[IA-64]
 
 	noexec		[X86]
@@ -3028,6 +3140,9 @@
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -3777,6 +3892,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4227,6 +4348,18 @@
 
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			off         - unconditionally disable
+			auto        - automatically select a migitation
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -4464,8 +4597,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - enhanced IBRS
+			eibrs,retpoline   - enhanced IBRS + Retpolines
+			eibrs,lfence      - enhanced IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -4569,6 +4707,26 @@
 	spia_pedr=
 	spia_peddr=
 
+	srbds=		[X86,INTEL]
+			Control the Special Register Buffer Data Sampling
+			(SRBDS) mitigation.
+
+			Certain CPUs are vulnerable to an MDS-like
+			exploit which can leak bits from the random
+			number generator.
+
+			By default, this issue is mitigated by
+			microcode.  However, the microcode fix can cause
+			the RDRAND and RDSEED instructions to become
+			much slower.  Among other effects, this will
+			result in reduced throughput from /dev/urandom.
+
+			The microcode mitigation can be disabled with
+			the following option:
+
+			off:    Disable mitigation and remove
+				performance impact to RDRAND and RDSEED
+
 	srcutree.counter_wrap_check [KNL]
 			Specifies how frequently to check for
 			grace-period sequence counter wrap for the
@@ -4931,6 +5089,11 @@
 				     vulnerable to cross-thread TAA attacks.
 			off        - Unconditionally disable TAA mitigation
 
+			On MDS-affected machines, tsx_async_abort=off can be
+			prevented by an active MDS mitigation as both vulnerabilities
+			are mitigated with the same mechanism so in order to disable
+			this mitigation, you need to specify mds=off too.
+
 			Not specifying this option is equivalent to
 			tsx_async_abort=full.  On CPUs which are MDS affected
 			and deploy MDS mitigation, TAA mitigation is not
@@ -4990,8 +5153,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by
@@ -5090,13 +5252,13 @@
 			Flags is a set of characters, each corresponding
 			to a common usb-storage quirk flag as follows:
 				a = SANE_SENSE (collect more than 18 bytes
-					of sense data);
+					of sense data, not on uas);
 				b = BAD_SENSE (don't collect more than 18
-					bytes of sense data);
+					bytes of sense data, not on uas);
 				c = FIX_CAPACITY (decrease the reported
 					device capacity by one sector);
 				d = NO_READ_DISC_INFO (don't use
-					READ_DISC_INFO command);
+					READ_DISC_INFO command, not on uas);
 				e = NO_READ_CAPACITY_16 (don't use
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
@@ -5110,18 +5272,20 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
-					unlock ejectable media);
+					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
-					than 64 sectors = 32 KB at a time);
+					than 64 sectors = 32 KB at a time,
+					not on uas);
 				n = INITIAL_READ10 (force a retry of the
-					initial READ(10) command);
+					initial READ(10) command, not on uas);
 				o = CAPACITY_OK (accept the capacity
-					reported by the device);
+					reported by the device, not on uas);
 				p = WRITE_CACHE (the device cache is ON
-					by default);
+					by default, not on uas);
 				r = IGNORE_RESIDUE (the device reports
-					bogus residue values);
+					bogus residue values, not on uas);
 				s = SINGLE_LUN (the device has only one
 					Logical Unit);
 				t = NO_ATA_1X (don't allow ATA(12) and ATA(16)
@@ -5130,7 +5294,8 @@
 				w = NO_WP_DETECT (don't test whether the
 					medium is write-protected).
 				y = ALWAYS_SYNC (issue a SYNCHRONIZE_CACHE
-					even if the device claims no cache)
+					even if the device claims no cache,
+					not on uas)
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
 	user_debug=	[KNL,ARM]
@@ -5408,6 +5573,10 @@
 			This option is obsoleted by the "nopv" option, which
 			has equivalent effect for XEN platform.
 
+	xen_no_vector_callback
+			[KNL,X86,XEN] Disable the vector callback for Xen
+			event channel interrupts.
+
 	xen_scrub_pages=	[XEN]
 			Boolean option to control scrubbing pages before giving them back
 			to Xen, for use by other domains. Can be also changed at runtime
@@ -5426,6 +5595,21 @@
 			as generic guest with no PV drivers. Currently support
 			XEN HVM, KVM, HYPER_V and VMWARE guest.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
+	xen.event_eoi_delay=	[XEN]
+			How long to delay EOI handling in case of event
+			storms (jiffies). Default is 10.
+
+	xen.event_loop_timeout=	[XEN]
+			After which time (jiffies) the event handling loop
+			should start to delay EOI handling. Default is 2.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/pm/cpuidle.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/pm/cpuidle.rst
index e70b365dbc60..80cf2ef2a506 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/pm/cpuidle.rst
@@ -676,8 +676,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -699,10 +699,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/security-bugs.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/security-bugs.rst
index dcd6c93c7aac..521acda367ae 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/security-bugs.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/security-bugs.rst
@@ -56,31 +56,28 @@ information submitted to the security list and any followup discussions
 of the report are treated confidentially even after the embargo has been
 lifted, in perpetuity.
 
-Coordination
-------------
-
-Fixes for sensitive bugs, such as those that might lead to privilege
-escalations, may need to be coordinated with the private
-<linux-distros@vs.openwall.org> mailing list so that distribution vendors
-are well prepared to issue a fixed kernel upon public disclosure of the
-upstream fix. Distros will need some time to test the proposed patch and
-will generally request at least a few days of embargo, and vendor update
-publication prefers to happen Tuesday through Thursday. When appropriate,
-the security team can assist with this coordination, or the reporter can
-include linux-distros from the start. In this case, remember to prefix
-the email Subject line with "[vs]" as described in the linux-distros wiki:
-<http://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists>
+Coordination with other groups
+------------------------------
+
+The kernel security team strongly recommends that reporters of potential
+security issues NEVER contact the "linux-distros" mailing list until
+AFTER discussing it with the kernel security team.  Do not Cc: both
+lists at once.  You may contact the linux-distros mailing list after a
+fix has been agreed on and you fully understand the requirements that
+doing so will impose on you and the kernel community.
+
+The different lists have different goals and the linux-distros rules do
+not contribute to actually fixing any potential security problems.
 
 CVE assignment
 --------------
 
-The security team does not normally assign CVEs, nor do we require them
-for reports or fixes, as this can needlessly complicate the process and
-may delay the bug handling. If a reporter wishes to have a CVE identifier
-assigned ahead of public disclosure, they will need to contact the private
-linux-distros list, described above. When such a CVE identifier is known
-before a patch is provided, it is desirable to mention it in the commit
-message if the reporter agrees.
+The security team does not assign CVEs, nor do we require them for
+reports or fixes, as this can needlessly complicate the process and may
+delay the bug handling.  If a reporter wishes to have a CVE identifier
+assigned, they should find one by themselves, for example by contacting
+MITRE directly.  However under no circumstances will a patch inclusion
+be delayed to wait for a CVE identifier to arrive.
 
 Non-disclosure agreements
 -------------------------
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/kernel.rst
index 032c7cd3cede..568c24ff00a7 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/kernel.rst
@@ -557,6 +557,15 @@ numa_balancing_scan_size_mb is how many megabytes worth of pages are
 scanned for a given scan.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version:
 ============================
 
@@ -862,9 +871,40 @@ The kernel command line parameter printk.devkmsg= overrides this and is
 a one-time setting until next reboot: once set, it cannot be changed by
 this sysctl interface anymore.
 
+pty
+===
 
-randomize_va_space:
-===================
+See Documentation/filesystems/devpts.rst.
+
+
+random
+======
+
+This is a directory, with the following entries:
+
+* ``boot_id``: a UUID generated the first time this is retrieved, and
+  unvarying after that;
+
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
+* ``entropy_avail``: the pool's entropy count, in bits;
+
+* ``poolsize``: the entropy pool size, in bits;
+
+* ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
+
+* ``write_wakeup_threshold``: when the entropy count drops below this
+  (as a number of bits), processes waiting to write to ``/dev/random``
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
+
+
+randomize_va_space
+==================
 
 This option can be used to select the type of process address
 space randomization that is used in the system, for architectures
@@ -1125,6 +1165,37 @@ NMI switch that most IA32 servers have fires unknown NMI up, for
 example.  If a system hangs up, try pressing the NMI switch.
 
 
+unprivileged_bpf_disabled:
+==========================
+
+Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
+``-EPERM``. Once set to 1, this can't be cleared from the running kernel
+anymore.
+
+Writing 2 to this entry will also disable unprivileged calls to ``bpf()``,
+however, an admin can still change this setting later on, if needed, by
+writing 0 or 1 to this entry.
+
+If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this
+entry will default to 2 instead of 0.
+
+= =============================================================
+0 Unprivileged calls to ``bpf()`` are enabled
+1 Unprivileged calls to ``bpf()`` are disabled without recovery
+2 Unprivileged calls to ``bpf()`` are disabled
+= =============================================================
+
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog:
 =========
 
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/net.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/net.rst
index 287b98708a40..70bab788fca3 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/net.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/net.rst
@@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration.
 
 Table : Subdirectories in /proc/sys/net
 
- ========= =================== = ========== ==================
+ ========= =================== = ========== ===================
  Directory Content               Directory  Content
- ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
  ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
- ========= =================== = ========== ==================
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
 
 1. /proc/sys/net/core - Network core options
 ============================================
diff --git linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/vm.rst
index 64aeee1009ca..fdc9c99437d1 100644
--- linux-libre-5.4-gnu1/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.4.261-gnu1/Documentation/admin-guide/sysctl/vm.rst
@@ -61,6 +61,7 @@ Currently, these files are in /proc/sys/vm:
 - overcommit_memory
 - overcommit_ratio
 - page-cluster
+- page_lock_unfairness
 - panic_on_oom
 - percpu_pagelist_fraction
 - stat_interval
@@ -741,6 +742,14 @@ extra faults and I/O delays for following faults if they would have been part of
 that consecutive pages readahead would have brought in.
 
 
+page_lock_unfairness
+====================
+
+This value determines the number of times that the page lock can be
+stolen from under a waiter. After the lock is stolen the number of times
+specified in this file (default is 5), the "fair lock handoff" semantics
+will apply, and the waiter will only be awakened if the lock can be taken.
+
 panic_on_oom
 ============
 
diff --git linux-libre-5.4-gnu1/Documentation/arm/memory.rst linux-libre-5.4.261-gnu1/Documentation/arm/memory.rst
index 0521b4ce5c96..34bb23c44a71 100644
--- linux-libre-5.4-gnu1/Documentation/arm/memory.rst
+++ linux-libre-5.4.261-gnu1/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for platforms with
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
diff --git linux-libre-5.4-gnu1/Documentation/arm64/silicon-errata.rst linux-libre-5.4.261-gnu1/Documentation/arm64/silicon-errata.rst
index 5a09661330fc..6b70b6aabcff 100644
--- linux-libre-5.4-gnu1/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.4.261-gnu1/Documentation/arm64/silicon-errata.rst
@@ -70,8 +70,12 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
@@ -88,6 +92,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
@@ -128,6 +134,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
+|                | Hip09 SMMU PMCG |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.4-gnu1/Documentation/arm64/tagged-address-abi.rst linux-libre-5.4.261-gnu1/Documentation/arm64/tagged-address-abi.rst
index d4a85d535bf9..7d255249094d 100644
--- linux-libre-5.4-gnu1/Documentation/arm64/tagged-address-abi.rst
+++ linux-libre-5.4.261-gnu1/Documentation/arm64/tagged-address-abi.rst
@@ -44,8 +44,25 @@ The AArch64 Tagged Address ABI has two stages of relaxation depending
 how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
-   management (e.g. ``mmap()``, ``mprotect()``, ``madvise()``). The use
-   of valid tagged pointers in this context is always allowed.
+   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
diff --git linux-libre-5.4-gnu1/Documentation/asm-annotations.rst linux-libre-5.4.261-gnu1/Documentation/asm-annotations.rst
new file mode 100644
index 000000000000..29ccd6e61fe5
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/asm-annotations.rst
@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/20170217104757.28588-1-jslaby@suse.cz
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.
diff --git linux-libre-5.4-gnu1/Documentation/atomic_bitops.txt linux-libre-5.4.261-gnu1/Documentation/atomic_bitops.txt
index 093cdaefdb37..d8b101c97031 100644
--- linux-libre-5.4-gnu1/Documentation/atomic_bitops.txt
+++ linux-libre-5.4.261-gnu1/Documentation/atomic_bitops.txt
@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 
diff --git linux-libre-5.4-gnu1/Documentation/conf.py linux-libre-5.4.261-gnu1/Documentation/conf.py
index a8fe845832bc..38c1f7618b5e 100644
--- linux-libre-5.4-gnu1/Documentation/conf.py
+++ linux-libre-5.4.261-gnu1/Documentation/conf.py
@@ -98,7 +98,7 @@ finally:
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
diff --git linux-libre-5.4-gnu1/Documentation/core-api/xarray.rst linux-libre-5.4.261-gnu1/Documentation/core-api/xarray.rst
index fcedc5349ace..2ad3c1fce579 100644
--- linux-libre-5.4-gnu1/Documentation/core-api/xarray.rst
+++ linux-libre-5.4.261-gnu1/Documentation/core-api/xarray.rst
@@ -461,13 +461,15 @@ or iterations will move the index to the first index in the range.
 Each entry will only be returned once, no matter how many indices it
 occupies.
 
-Using xas_next() or xas_prev() with a multi-index xa_state
-is not supported.  Using either of these functions on a multi-index entry
-will reveal sibling entries; these should be skipped over by the caller.
-
-Storing ``NULL`` into any index of a multi-index entry will set the entry
-at every index to ``NULL`` and dissolve the tie.  Splitting a multi-index
-entry into entries occupying smaller ranges is not yet supported.
+Using xas_next() or xas_prev() with a multi-index xa_state is not
+supported.  Using either of these functions on a multi-index entry will
+reveal sibling entries; these should be skipped over by the caller.
+
+Storing ``NULL`` into any index of a multi-index entry will set the
+entry at every index to ``NULL`` and dissolve the tie.  A multi-index
+entry can be split into entries occupying smaller ranges by calling
+xas_split_alloc() without the xa_lock held, followed by taking the lock
+and calling xas_split().
 
 Functions and structures
 ========================
diff --git linux-libre-5.4-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst linux-libre-5.4.261-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
index 19df79286f00..afe4bc206486 100644
--- linux-libre-5.4-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ linux-libre-5.4.261-gnu1/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/Makefile linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/Makefile
index 5138a2f6232a..646cb3525373 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/Makefile
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/Makefile
@@ -12,7 +12,6 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE
 	$(call if_changed,chk_binding)
 
 DT_TMP_SCHEMA := processed-schema.yaml
-extra-y += $(DT_TMP_SCHEMA)
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
@@ -26,8 +25,12 @@ DT_DOCS = $(shell \
 
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
 
+ifeq ($(CHECK_DTBS),)
 extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
 extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+endif
 
 $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
+
+extra-y += $(DT_TMP_SCHEMA)
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
index e39d8f02e33c..3de6182cde97 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -112,8 +112,8 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
index 60b38eb5c61a..56e1945911f1 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -49,7 +49,7 @@ properties:
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
index e96e085271c1..83f6c6a7c41c 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -46,7 +46,7 @@ Required properties:
 Example (R-Car H3):
 
 	usb2_clksel: clock-controller@e6590630 {
-		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
 			     "renesas,rcar-gen3-usb2-clock-sel";
 		reg = <0 0xe6590630 0 0x02>;
 		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index fb747682006d..92dc08b78a17 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -101,6 +104,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index d1205a6697a0..766b04501cb9 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 examples:
   - |
@@ -116,6 +121,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index 4cb9d6b93138..c61c4a6b57f1 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -58,7 +58,7 @@ if:
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
index d4d83916c09d..be329ea4794f 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
@@ -20,8 +20,9 @@ Required properties:
 - gpio-controller : Marks the device node as a GPIO controller
 - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
 - interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of GPIO lines, see gpio.txt
-  (should be multiple of 8, up to 80 pins)
+- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
+  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
+  output. Up to 80 pins, must be a multiple of 8.
 - clocks : A phandle to the APB clock for SGPM clock division
 - bus-frequency : SGPM CLK frequency
 
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cc544fdc38be..bc8aed17800d 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -85,7 +85,7 @@ properties:
       Must be the device tree identifier of the over-sampling
       mode pins. As the line is active high, it should be marked
       GPIO_ACTIVE_HIGH.
-    maxItems: 1
+    maxItems: 3
 
   adi,sw-mode:
     description:
@@ -128,9 +128,9 @@ examples:
                 adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                 reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
                 adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-                                                &gpio 23 GPIO_ACTIVE_HIGH
-                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
                 standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                 adi,sw-mode;
         };
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
index c82794002595..89647d714387 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
@@ -21,7 +21,7 @@ controller state. The mux controller state is described in
 
 Example:
 	mux: mux-controller {
-		compatible = "mux-gpio";
+		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
 
 		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
index 1a8718f8855d..178fca08278f 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
@@ -55,7 +55,7 @@ Required Properties:
 			corresponds to a range of host irqs.
 
 For more details on TISCI IRQ resource management refer:
-http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
+https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
 
 Example:
 --------
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
index 4438432bfe9b..ad76edccf881 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -87,7 +87,7 @@ Example:
 		ranges;
 
 		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff90400 {
+		ipi_mailbox_rpu0: mailbox@ff990400 {
 			reg = <0xff990400 0x20>,
 			      <0xff990420 0x20>,
 			      <0xff990080 0x20>,
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mmc/mtk-sd.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 8a532f4453f2..09aecec47003 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -49,6 +49,8 @@ Optional properties:
 		     error caused by stop clock(fifo full)
 		     Valid range = [0:0x7]. if not present, default value is 0.
 		     applied to compatible "mediatek,mt2701-mmc".
+- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
+- reset-names: Should be "hrst".
 
 Examples:
 mmc0: mmc@11230000 {
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 2cf3affa1be7..96c0b1440c9c 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -15,8 +15,15 @@ Required properties:
   - "nvidia,tegra210-sdhci": for Tegra210
   - "nvidia,tegra186-sdhci": for Tegra186
   - "nvidia,tegra194-sdhci": for Tegra194
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
+- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
+	  One for the module clock and one for the timeout clock.
+	  For all other Tegra devices, must contain a single entry for
+	  the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
+	       strings 'sdhci' and 'tmclk' to represent the module and
+	       the timeout clocks, respectively.
+	       For all other Tegra devices must contain the string 'sdhci'
+	       to represent the module clock.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
 
 Example:
 sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	compatible = "nvidia,tegra124-sdhci";
 	reg = <0x0 0x700b0000 0x0 0x200>;
 	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +122,22 @@ sdhci@700b0000 {
 	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
 	status = "disabled";
 };
+
+sdhci@700b0000 {
+	compatible = "nvidia,tegra210-sdhci";
+	reg = <0x0 0x700b0000 0x0 0x200>;
+	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+	clock-names = "sdhci", "tmclk";
+	resets = <&tegra_car 14>;
+	reset-names = "sdhci";
+	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+	pinctrl-0 = <&sdmmc1_3v3>;
+	pinctrl-1 = <&sdmmc1_1v8>;
+	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+	status = "disabled";
+};
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 44919d48d241..c459f169a904 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -122,7 +122,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..2767f182fd3c 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -44,7 +44,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-mode:
         allOf:
@@ -139,6 +139,6 @@ examples:
         nand-ecc-mode = "soft";
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
     };
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/btusb.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/btusb.txt
index b1ad6ee68e90..c51dd99dc0d3 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/btusb.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/btusb.txt
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 27e1b4cebfbd..53c26ffd020a 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,9 +31,9 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 GPIO_ACTIVE_LOW>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 0e7c31794ae6..fcafce635ff0 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -51,7 +51,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:
@@ -190,6 +190,11 @@ properties:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
+            pause:
+              $ref: /schemas/types.yaml#definitions/flag
+              description:
+                Indicates that pause should be enabled.
+
             asym-pause:
               $ref: /schemas/types.yaml#definitions/flag
               description:
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index f70f18ff821f..8f3e9c774b74 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -87,6 +87,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#definitions/flag
     description:
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/fsl-fman.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/fsl-fman.txt
index 299c0dcd67db..1316f0aec0cf 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -110,6 +110,13 @@ PROPERTIES
 		Usage: required
 		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
 
+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
 =============================================================================
 FMan MURAM Node
 
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index cfaf88998918..9e4dc510a40a 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 		clock-frequency = <100000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/nfc/pn544.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 92f399ec22b8..2bd82562ce8e 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 4845e29411e4..e08cd4c4d568 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -347,6 +347,7 @@ allOf:
               - st,spear600-gmac
 
     then:
+      properties:
         snps,tso:
           $ref: /schemas/types.yaml#definitions/flag
           description:
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 7f8400d0f7d8..9a6022e1acdb 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -81,6 +81,12 @@ Optional properties:
 	Definition: Name of external front end module used. Some valid FEM names
 		    for example: "microsemi-lx5586", "sky85703-11"
 		    and "sky85803" etc.
+- qcom,snoc-host-cap-8bit-quirk:
+	Usage: Optional
+	Value type: <empty>
+	Definition: Quirk specifying that the firmware expects the 8bit version
+		    of the host capability QMI request
+
 
 Example (to supply PCI based wifi block details):
 
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index b739f92da58e..1f90eb39870b 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -118,7 +118,7 @@ Tegra194:
 --------
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
similarity index 82%
rename from Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
rename to Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
index 346f9c35427c..5407468a8dda 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Amlogic G12A USB3 + PCIE Combo PHY
@@ -13,7 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
-      - amlogic,meson-g12a-usb3-pcie-phy
+      - amlogic,g12a-usb3-pcie-phy
 
   reg:
     maxItems: 1
@@ -47,7 +47,7 @@ required:
 examples:
   - |
     phy@46000 {
-          compatible = "amlogic,meson-g12a-usb3-pcie-phy";
+          compatible = "amlogic,g12a-usb3-pcie-phy";
           reg = <0x46000 0x2000>;
           clocks = <&ref_clk>;
           clock-names = "ref_clk";
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index 38dc56a57760..ecec514b3155 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
index 6e5341b4f891..ee59409640f2 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
@@ -22,6 +22,6 @@ Example:
 	};
 
 	&ethernet_switch {
-		resets = <&reset>;
+		resets = <&reset 26>;
 		reset-names = "switch";
 	};
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
new file mode 100644
index 000000000000..f315c9723bd2
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
@@ -0,0 +1,27 @@
+OMAP ROM RNG driver binding
+
+Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The
+implementation can depend on the SoC secure ROM used.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "nokia,n900-rom-rng"
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the the RNG interface clock
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "ick"
+
+Example:
+
+	rom_rng: rng {
+		compatible = "nokia,n900-rom-rng";
+		clocks = <&rng_ick>;
+		clock-names = "ick";
+	};
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
index d7a57ec4a640..140793050df3 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -128,7 +128,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
   - clock-output-names
 
 additionalProperties: false
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
index d6d5207fa996..17ff3892f439 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -2,9 +2,11 @@ MT8183 with MT6358, TS3A227 and MAX98357 CODECS
 
 Required properties:
 - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
-- mediatek,headset-codec: the phandles of ts3a227 codecs
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
+Optional properties:
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+
 Example:
 
 	sound {
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
index 5d6ea66a863f..1f75feec3dec 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -109,7 +109,7 @@ audio-codec@1{
 	reg  = <1 0>;
 	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
 	interrupt-names = "intr2"
-	reset-gpios = <&msmgpio 64 0>;
+	reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>;
 	slim-ifc-dev  = <&wc9335_ifd>;
 	clock-names = "mclk", "native";
 	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/wm8994.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/wm8994.txt
index 68cccc4653ba..367b58ce1bb9 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/sound/wm8994.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -73,11 +79,11 @@ wm8994: codec@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/bindings/usb/dwc3.txt linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/usb/dwc3.txt
index 66780a47ad85..c977a3ba2f35 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/bindings/usb/dwc3.txt
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -75,6 +75,8 @@ Optional properties:
 			from P0 to P1/P2/P3 without delay.
  - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
 			during HS transmit.
+ - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in
+			park mode are disabled.
  - snps,dis_metastability_quirk: when set, disable metastability workaround.
 			CAUTION: use only if you are absolutely sure of it.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
diff --git linux-libre-5.4-gnu1/Documentation/devicetree/writing-schema.rst linux-libre-5.4.261-gnu1/Documentation/devicetree/writing-schema.rst
index f4a638072262..83e04e5c342d 100644
--- linux-libre-5.4-gnu1/Documentation/devicetree/writing-schema.rst
+++ linux-libre-5.4.261-gnu1/Documentation/devicetree/writing-schema.rst
@@ -130,11 +130,13 @@ binding schema. All of the DT binding documents can be validated using the
 
     make dt_binding_check
 
-In order to perform validation of DT source files, use the `dtbs_check` target::
+In order to perform validation of DT source files, use the ``dtbs_check`` target::
 
     make dtbs_check
 
-This will first run the `dt_binding_check` which generates the processed schema.
+Note that ``dtbs_check`` will skip any binding schema files with errors. It is
+necessary to use ``dt_binding_check`` to get all the validation errors in the
+binding schema files.
 
 It is also possible to run checks with a single schema file by setting the
 ``DT_SCHEMA_FILES`` variable to a specific schema file.
diff --git linux-libre-5.4-gnu1/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.4.261-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.4-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.4.261-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.4-gnu1/Documentation/driver-api/firewire.rst linux-libre-5.4.261-gnu1/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.4-gnu1/Documentation/driver-api/firewire.rst
+++ linux-libre-5.4.261-gnu1/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.4-gnu1/Documentation/driver-api/libata.rst linux-libre-5.4.261-gnu1/Documentation/driver-api/libata.rst
index 70e180e6b93d..9f3e5dc31184 100644
--- linux-libre-5.4-gnu1/Documentation/driver-api/libata.rst
+++ linux-libre-5.4.261-gnu1/Documentation/driver-api/libata.rst
@@ -250,7 +250,7 @@ High-level taskfile hooks
 
 ::
 
-    void (*qc_prep) (struct ata_queued_cmd *qc);
+    enum ata_completion_errors (*qc_prep) (struct ata_queued_cmd *qc);
     int (*qc_issue) (struct ata_queued_cmd *qc);
 
 
diff --git linux-libre-5.4-gnu1/Documentation/driver-api/spi.rst linux-libre-5.4.261-gnu1/Documentation/driver-api/spi.rst
index f64cb666498a..f28887045049 100644
--- linux-libre-5.4-gnu1/Documentation/driver-api/spi.rst
+++ linux-libre-5.4.261-gnu1/Documentation/driver-api/spi.rst
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
diff --git linux-libre-5.4-gnu1/Documentation/fault-injection/fault-injection.rst linux-libre-5.4.261-gnu1/Documentation/fault-injection/fault-injection.rst
index f51bb21d20e4..49b577307385 100644
--- linux-libre-5.4-gnu1/Documentation/fault-injection/fault-injection.rst
+++ linux-libre-5.4.261-gnu1/Documentation/fault-injection/fault-injection.rst
@@ -74,8 +74,8 @@ configuration of fault-injection capabilities.
 
 - /sys/kernel/debug/fail*/times:
 
-	specifies how many times failures may happen at most.
-	A value of -1 means "no limit".
+	specifies how many times failures may happen at most. A value of -1
+	means "no limit".
 
 - /sys/kernel/debug/fail*/space:
 
@@ -163,11 +163,13 @@ configuration of fault-injection capabilities.
 	- ERRNO: retval must be -1 to -MAX_ERRNO (-4096).
 	- ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096).
 
-- /sys/kernel/debug/fail_function/<functiuon-name>/retval:
+- /sys/kernel/debug/fail_function/<function-name>/retval:
 
-	specifies the "error" return value to inject to the given
-	function for given function. This will be created when
-	user specifies new injection entry.
+	specifies the "error" return value to inject to the given function.
+	This will be created when the user specifies a new injection entry.
+	Note that this file only accepts unsigned values. So, if you want to
+	use a negative errno, you better use 'printf' instead of 'echo', e.g.:
+	$ printf %#x -12 > retval
 
 Boot option
 ^^^^^^^^^^^
@@ -331,7 +333,7 @@ Application Examples
     FAILTYPE=fail_function
     FAILFUNC=open_ctree
     echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject
-    echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
+    printf %#x -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
     echo N > /sys/kernel/debug/$FAILTYPE/task-filter
     echo 100 > /sys/kernel/debug/$FAILTYPE/probability
     echo 0 > /sys/kernel/debug/$FAILTYPE/interval
diff --git linux-libre-5.4-gnu1/Documentation/fb/fbcon.rst linux-libre-5.4.261-gnu1/Documentation/fb/fbcon.rst
index ebca41785abe..65ba40255137 100644
--- linux-libre-5.4-gnu1/Documentation/fb/fbcon.rst
+++ linux-libre-5.4.261-gnu1/Documentation/fb/fbcon.rst
@@ -127,7 +127,7 @@ C. Boot options
 	is typically located on the same video card.  Thus, the consoles that
 	are controlled by the VGA console will be garbled.
 
-4. fbcon=rotate:<n>
+5. fbcon=rotate:<n>
 
 	This option changes the orientation angle of the console display. The
 	value 'n' accepts the following:
@@ -152,21 +152,21 @@ C. Boot options
 	Actually, the underlying fb driver is totally ignorant of console
 	rotation.
 
-5. fbcon=margin:<color>
+6. fbcon=margin:<color>
 
 	This option specifies the color of the margins. The margins are the
 	leftover area at the right and the bottom of the screen that are not
 	used by text. By default, this area will be black. The 'color' value
 	is an integer number that depends on the framebuffer driver being used.
 
-6. fbcon=nodefer
+7. fbcon=nodefer
 
 	If the kernel is compiled with deferred fbcon takeover support, normally
 	the framebuffer contents, left in place by the firmware/bootloader, will
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
-7. fbcon=logo-pos:<location>
+8. fbcon=logo-pos:<location>
 
 	The only possible 'location' is 'center' (without quotes), and when
 	given, the bootup logo is moved from the default top-left corner
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/affs.txt linux-libre-5.4.261-gnu1/Documentation/filesystems/affs.txt
index 71b63c2b9841..a8f1a58e3692 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/affs.txt
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/affs.txt
@@ -93,13 +93,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
 
   - R maps to r for user, group and others. On directories, R implies x.
 
-  - If both W and D are allowed, w will be set.
+  - W maps to w.
 
   - E maps to x.
 
-  - H and P are always retained and ignored under Linux.
+  - D is ignored.
 
-  - A is always reset when a file is written to.
+  - H, S and P are always retained and ignored under Linux.
+
+  - A is cleared when a file is written to.
 
 User id and group id will be used unless set[gu]id are given as mount
 options. Since most of the Amiga file systems are single user systems
@@ -111,11 +113,13 @@ Linux -> Amiga:
 
 The Linux rwxrwxrwx file mode is handled as follows:
 
-  - r permission will set R for user, group and others.
+  - r permission will allow R for user, group and others.
+
+  - w permission will allow W for user, group and others.
 
-  - w permission will set W and D for user, group and others.
+  - x permission of the user will allow E for plain files.
 
-  - x permission of the user will set E for plain files.
+  - D will be allowed for user, group and others.
 
   - All other flags (suid, sgid, ...) are ignored and will
     not be retained.
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/directory-locking.rst linux-libre-5.4.261-gnu1/Documentation/filesystems/directory-locking.rst
index de12016ee419..e59fc830c9af 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/directory-locking.rst
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/directory-locking.rst
@@ -22,12 +22,11 @@ exclusive.
 3) object removal.  Locking rules: caller locks parent, finds victim,
 locks victim and calls the method.  Locks are exclusive.
 
-4) rename() that is _not_ cross-directory.  Locking rules: caller locks
-the parent and finds source and target.  In case of exchange (with
-RENAME_EXCHANGE in flags argument) lock both.  In any case,
-if the target already exists, lock it.  If the source is a non-directory,
-lock it.  If we need to lock both, lock them in inode pointer order.
-Then call the method.  All locks are exclusive.
+4) rename() that is _not_ cross-directory.  Locking rules: caller locks the
+parent and finds source and target.  We lock both (provided they exist).  If we
+need to lock two inodes of different type (dir vs non-dir), we lock directory
+first.  If we need to lock two inodes of the same type, lock them in inode
+pointer order.  Then call the method.  All locks are exclusive.
 NB: we might get away with locking the the source (and target in exchange
 case) shared.
 
@@ -44,15 +43,17 @@ All locks are exclusive.
 rules:
 
 	* lock the filesystem
-	* lock parents in "ancestors first" order.
+	* lock parents in "ancestors first" order. If one is not ancestor of
+	  the other, lock them in inode pointer order.
 	* find source and target.
 	* if old parent is equal to or is a descendent of target
 	  fail with -ENOTEMPTY
 	* if new parent is equal to or is a descendent of source
 	  fail with -ELOOP
-	* If it's an exchange, lock both the source and the target.
-	* If the target exists, lock it.  If the source is a non-directory,
-	  lock it.  If we need to lock both, do so in inode pointer order.
+	* Lock both the source and the target provided they exist. If we
+	  need to lock two inodes of different type (dir vs non-dir), we lock
+	  the directory first. If we need to lock two inodes of the same type,
+	  lock them in inode pointer order.
 	* call the method.
 
 All ->i_rwsem are taken exclusive.  Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
 
 Proof:
 
-	First of all, at any moment we have a partial ordering of the
-	objects - A < B iff A is an ancestor of B.
+	First of all, at any moment we have a linear ordering of the
+	objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
+        of A and ptr(A) < ptr(B)).
 
 	That ordering can change.  However, the following is true:
 
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/ext4/attributes.rst linux-libre-5.4.261-gnu1/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/porting.rst linux-libre-5.4.261-gnu1/Documentation/filesystems/porting.rst
index f18506083ced..26c093969573 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/porting.rst
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/porting.rst
@@ -850,3 +850,11 @@ business doing so.
 d_alloc_pseudo() is internal-only; uses outside of alloc_file_pseudo() are
 very suspect (and won't work in modules).  Such uses are very likely to
 be misspelled d_alloc_anon().
+
+---
+
+**mandatory**
+
+[should've been added in 2016] stale comment in finish_open() nonwithstanding,
+failure exits in ->atomic_open() instances should *NOT* fput() the file,
+no matter what.  Everything is handled by the caller.
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/seq_file.txt linux-libre-5.4.261-gnu1/Documentation/filesystems/seq_file.txt
index d412b236a9d6..7cf7143921a1 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/seq_file.txt
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/seq_file.txt
@@ -192,6 +192,12 @@ between the calls to start() and stop(), so holding a lock during that time
 is a reasonable thing to do. The seq_file code will also avoid taking any
 other locks while the iterator is active.
 
+The iterater value returned by start() or next() is guaranteed to be
+passed to a subsequent next() or stop() call.  This allows resources
+such as locks that were taken to be reliably released.  There is *no*
+guarantee that the iterator will be passed to show(), though in practice
+it often will be.
+
 
 Formatted output
 
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/sysfs.txt linux-libre-5.4.261-gnu1/Documentation/filesystems/sysfs.txt
index ddf15b1b0d5a..33ec0a01450d 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/sysfs.txt
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/sysfs.txt
@@ -232,12 +232,10 @@ Other notes:
   is 4096. 
 
 - show() methods should return the number of bytes printed into the
-  buffer. This is the return value of scnprintf().
+  buffer.
 
-- show() must not use snprintf() when formatting the value to be
-  returned to user space. If you can guarantee that an overflow
-  will never happen you can use sprintf() otherwise you must use
-  scnprintf().
+- show() should only use sysfs_emit() or sysfs_emit_at() when formatting
+  the value to be returned to user space.
 
 - store() should return the number of bytes used from the buffer. If the
   entire buffer has been used, just return the count argument.
diff --git linux-libre-5.4-gnu1/Documentation/filesystems/vfs.rst linux-libre-5.4.261-gnu1/Documentation/filesystems/vfs.rst
index 7d4d09dd5e6d..241e31200643 100644
--- linux-libre-5.4-gnu1/Documentation/filesystems/vfs.rst
+++ linux-libre-5.4.261-gnu1/Documentation/filesystems/vfs.rst
@@ -1173,7 +1173,7 @@ defined:
 	return
 	-ECHILD and it will be called again in ref-walk mode.
 
-``_weak_revalidate``
+``d_weak_revalidate``
 	called when the VFS needs to revalidate a "jumped" dentry.  This
 	is called when a path-walk ends at dentry that was not acquired
 	by doing a lookup in the parent directory.  This includes "/",
diff --git linux-libre-5.4-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst linux-libre-5.4.261-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
index e588bccf5158..344284236a81 100644
--- linux-libre-5.4-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
+++ linux-libre-5.4.261-gnu1/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -168,7 +168,7 @@ An error injection example::
   0x00000008	Memory Correctable
   0x00000010	Memory Uncorrectable non-fatal
   # echo 0x12345000 > param1		# Set memory address for injection
-  # echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+  # echo 0xfffffffffffff000 > param2		# Mask - anywhere in this page
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
diff --git linux-libre-5.4-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.4.261-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index febccbc5689d..1b05e8d0ddff 100644
--- linux-libre-5.4-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.4.261-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.4-gnu1/Documentation/hwmon/lm90.rst linux-libre-5.4.261-gnu1/Documentation/hwmon/lm90.rst
index 953315987c06..03851cbe637c 100644
--- linux-libre-5.4-gnu1/Documentation/hwmon/lm90.rst
+++ linux-libre-5.4.261-gnu1/Documentation/hwmon/lm90.rst
@@ -123,6 +123,18 @@ Supported chips:
 
 	       http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
 
+  * Maxim MAX6654
+
+    Prefix: 'max6654'
+
+    Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+			   0x4c, 0x4d and 0x4e
+
+    Datasheet: Publicly available at the Maxim website
+
+	       https://www.maximintegrated.com/en/products/sensors/MAX6654.html
+
   * Maxim MAX6657
 
     Prefix: 'max6657'
@@ -253,6 +265,16 @@ Supported chips:
 
 	       http://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
@@ -301,6 +323,13 @@ ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
+MAX6654:
+  * Better local resolution
+  * Selectable address
+  * Remote sensor type selection
+  * Extended temperature range
+  * Extended resolution only available when conversion rate <= 1 Hz
+
 MAX6657 and MAX6658:
   * Better local resolution
   * Remote sensor type selection
@@ -336,8 +365,8 @@ SA56004X:
 
 All temperature values are given in degrees Celsius. Resolution
 is 1.0 degree for the local temperature, 0.125 degree for the remote
-temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
-resolution of 0.125 degree for both temperatures.
+temperature, except for the MAX6654, MAX6657, MAX6658 and MAX6659 which have
+a resolution of 0.125 degree for both temperatures.
 
 Each sensor has its own high and low limits, plus a critical limit.
 Additionally, there is a relative hysteresis value common to both critical
diff --git linux-libre-5.4-gnu1/Documentation/hwmon/max31790.rst linux-libre-5.4.261-gnu1/Documentation/hwmon/max31790.rst
index 84c62a12ef3a..f4749c44cfb8 100644
--- linux-libre-5.4-gnu1/Documentation/hwmon/max31790.rst
+++ linux-libre-5.4.261-gnu1/Documentation/hwmon/max31790.rst
@@ -38,6 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git linux-libre-5.4-gnu1/Documentation/index.rst linux-libre-5.4.261-gnu1/Documentation/index.rst
index b843e313d2f2..2ceab197246f 100644
--- linux-libre-5.4-gnu1/Documentation/index.rst
+++ linux-libre-5.4.261-gnu1/Documentation/index.rst
@@ -135,6 +135,14 @@ needed).
    mic/index
    scheduler/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 
diff --git linux-libre-5.4-gnu1/Documentation/input/joydev/joystick.rst linux-libre-5.4.261-gnu1/Documentation/input/joydev/joystick.rst
index 9746fd76cc58..f38c330c028e 100644
--- linux-libre-5.4-gnu1/Documentation/input/joydev/joystick.rst
+++ linux-libre-5.4.261-gnu1/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback
diff --git linux-libre-5.4-gnu1/Documentation/ioctl/ioctl-number.rst linux-libre-5.4.261-gnu1/Documentation/ioctl/ioctl-number.rst
index bef79cd4c6b4..6246a0d4f323 100644
--- linux-libre-5.4-gnu1/Documentation/ioctl/ioctl-number.rst
+++ linux-libre-5.4.261-gnu1/Documentation/ioctl/ioctl-number.rst
@@ -301,7 +301,6 @@ Code  Seq#    Include File                                           Comments
 0x89  00-06  arch/x86/include/asm/sockios.h
 0x89  0B-DF  linux/sockios.h
 0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
-0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
 0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
 0x8B  all    linux/wireless.h
 0x8C  00-3F                                                          WiNRADiO driver
diff --git linux-libre-5.4-gnu1/Documentation/kbuild/index.rst linux-libre-5.4.261-gnu1/Documentation/kbuild/index.rst
index 0f144fad99a6..3882bd5f7728 100644
--- linux-libre-5.4-gnu1/Documentation/kbuild/index.rst
+++ linux-libre-5.4.261-gnu1/Documentation/kbuild/index.rst
@@ -19,6 +19,7 @@ Kernel Build System
 
     issues
     reproducible-builds
+    llvm
 
 .. only::  subproject and html
 
diff --git linux-libre-5.4-gnu1/Documentation/kbuild/kbuild.rst linux-libre-5.4.261-gnu1/Documentation/kbuild/kbuild.rst
index f1e5dce86af7..852ccc551bb3 100644
--- linux-libre-5.4-gnu1/Documentation/kbuild/kbuild.rst
+++ linux-libre-5.4.261-gnu1/Documentation/kbuild/kbuild.rst
@@ -262,3 +262,8 @@ KBUILD_BUILD_USER, KBUILD_BUILD_HOST
 These two variables allow to override the user@host string displayed during
 boot and in /proc/version. The default value is the output of the commands
 whoami and host, respectively.
+
+LLVM
+----
+If this variable is set to 1, Kbuild will use Clang and LLVM utilities instead
+of GCC and GNU binutils to build the kernel.
diff --git linux-libre-5.4-gnu1/Documentation/kbuild/llvm.rst linux-libre-5.4.261-gnu1/Documentation/kbuild/llvm.rst
new file mode 100644
index 000000000000..c776b6eee969
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/kbuild/llvm.rst
@@ -0,0 +1,87 @@
+==============================
+Building Linux with Clang/LLVM
+==============================
+
+This document covers how to build the Linux kernel with Clang and LLVM
+utilities.
+
+About
+-----
+
+The Linux kernel has always traditionally been compiled with GNU toolchains
+such as GCC and binutils. Ongoing work has allowed for `Clang
+<https://clang.llvm.org/>`_ and `LLVM <https://llvm.org/>`_ utilities to be
+used as viable substitutes. Distributions such as `Android
+<https://www.android.com/>`_, `ChromeOS
+<https://www.chromium.org/chromium-os>`_, and `OpenMandriva
+<https://www.openmandriva.org/>`_ use Clang built kernels.  `LLVM is a
+collection of toolchain components implemented in terms of C++ objects
+<https://www.aosabook.org/en/llvm.html>`_. Clang is a front-end to LLVM that
+supports C and the GNU C extensions required by the kernel, and is pronounced
+"klang," not "see-lang."
+
+Clang
+-----
+
+The compiler used can be swapped out via `CC=` command line argument to `make`.
+`CC=` should be set when selecting a config and during a build.
+
+	make CC=clang defconfig
+
+	make CC=clang
+
+Cross Compiling
+---------------
+
+A single Clang compiler binary will typically contain all supported backends,
+which can help simplify cross compiling.
+
+	ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
+
+`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
+`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
+example:
+
+	clang --target aarch64-linux-gnu foo.c
+
+LLVM Utilities
+--------------
+
+LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
+to enable them.
+
+	make LLVM=1
+
+They can be enabled individually. The full list of the parameters:
+
+	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
+	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
+	  HOSTLD=ld.lld
+
+Currently, the integrated assembler is disabled by default. You can pass
+`LLVM_IAS=1` to enable it.
+
+Getting Help
+------------
+
+- `Website <https://clangbuiltlinux.github.io/>`_
+- `Mailing List <https://groups.google.com/forum/#!forum/clang-built-linux>`_: <clang-built-linux@googlegroups.com>
+- `Issue Tracker <https://github.com/ClangBuiltLinux/linux/issues>`_
+- IRC: #clangbuiltlinux on chat.freenode.net
+- `Telegram <https://t.me/ClangBuiltLinux>`_: @ClangBuiltLinux
+- `Wiki <https://github.com/ClangBuiltLinux/linux/wiki>`_
+- `Beginner Bugs <https://github.com/ClangBuiltLinux/linux/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22>`_
+
+Getting LLVM
+-------------
+
+- http://releases.llvm.org/download.html
+- https://github.com/llvm/llvm-project
+- https://llvm.org/docs/GettingStarted.html
+- https://llvm.org/docs/CMake.html
+- https://apt.llvm.org/
+- https://www.archlinux.org/packages/extra/x86_64/llvm/
+- https://github.com/ClangBuiltLinux/tc-build
+- https://github.com/ClangBuiltLinux/linux/wiki/Building-Clang-from-source
+- https://android.googlesource.com/platform/prebuilts/clang/host/linux-x86/
diff --git linux-libre-5.4-gnu1/Documentation/kbuild/makefiles.rst linux-libre-5.4.261-gnu1/Documentation/kbuild/makefiles.rst
index b89c88168d6a..b9b50553bfc5 100644
--- linux-libre-5.4-gnu1/Documentation/kbuild/makefiles.rst
+++ linux-libre-5.4.261-gnu1/Documentation/kbuild/makefiles.rst
@@ -1115,23 +1115,6 @@ When kbuild executes, the following steps are followed (roughly):
 	In this example, extra-y is used to list object files that
 	shall be built, but shall not be linked as part of built-in.a.
 
-    header-test-y
-
-	header-test-y specifies headers (`*.h`) in the current directory that
-	should be compile tested to ensure they are self-contained,
-	i.e. compilable as standalone units. If CONFIG_HEADER_TEST is enabled,
-	this builds them as part of extra-y.
-
-    header-test-pattern-y
-
-	This works as a weaker version of header-test-y, and accepts wildcard
-	patterns. The typical usage is::
-
-		header-test-pattern-y += *.h
-
-	This specifies all the files that matches to `*.h` in the current
-	directory, but the files in 'header-test-' are excluded.
-
 6.7 Commands useful for building a boot image
 ---------------------------------------------
 
diff --git linux-libre-5.4-gnu1/Documentation/kbuild/modules.rst linux-libre-5.4.261-gnu1/Documentation/kbuild/modules.rst
index 774a998dcf37..199ce72bf922 100644
--- linux-libre-5.4-gnu1/Documentation/kbuild/modules.rst
+++ linux-libre-5.4.261-gnu1/Documentation/kbuild/modules.rst
@@ -470,9 +470,9 @@ build.
 
 	The syntax of the Module.symvers file is::
 
-	<CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+	<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-	0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+	0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
 	The fields are separated by tabs and values may be empty (e.g.
 	if no namespace is defined for an exported symbol).
diff --git linux-libre-5.4-gnu1/Documentation/lzo.txt linux-libre-5.4.261-gnu1/Documentation/lzo.txt
index ca983328976b..f65b51523014 100644
--- linux-libre-5.4-gnu1/Documentation/lzo.txt
+++ linux-libre-5.4.261-gnu1/Documentation/lzo.txt
@@ -159,11 +159,15 @@ Byte sequences
            distance = 16384 + (H << 14) + D
            state = S (copy S literals after this block)
            End of stream is reached if distance == 16384
+           In version 1 only, to prevent ambiguity with the RLE case when
+           ((distance & 0x803f) == 0x803f) && (261 <= length <= 264), the
+           compressor must not emit block copies where distance and length
+           meet these conditions.
 
         In version 1 only, this instruction is also used to encode a run of
-        zeros if distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
+           zeros if distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
            In this case, it is followed by a fourth byte, X.
-           run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4.
+           run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4
 
       0 0 1 L L L L L  (32..63)
            Copy of small block within 16kB distance (preferably less than 34B)
diff --git linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/colorspaces-defs.rst linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/colorspaces-defs.rst
index e122bbe3d799..aabb08130354 100644
--- linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/colorspaces-defs.rst
+++ linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/colorspaces-defs.rst
@@ -36,8 +36,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
 :c:type:`v4l2_hsv_encoding` specifies which encoding is used.
 
 .. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
+   colorspaces. HSV formats are always full range.
 
 .. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
 
@@ -169,8 +168,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Details
     * - ``V4L2_QUANTIZATION_DEFAULT``
       - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+	colorspace. This is always full range for R'G'B' and HSV.
+	It is usually limited range for Y'CbCr.
     * - ``V4L2_QUANTIZATION_FULL_RANGE``
       - Use the full range quantization encoding. I.e. the range [0…1] is
 	mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +179,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
     * - ``V4L2_QUANTIZATION_LIM_RANGE``
       - Use the limited range quantization encoding. I.e. the range [0…1]
 	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
+	[16…240]. Limited Range cannot be used with HSV.
diff --git linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/colorspaces-details.rst linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/colorspaces-details.rst
index 8b0ba3668101..fd0cf57691d8 100644
--- linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/colorspaces-details.rst
+++ linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/colorspaces-details.rst
@@ -377,9 +377,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
 The :ref:`itu2020` standard defines the colorspace used by Ultra-high
 definition television (UHDTV). The default transfer function is
 ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
 
 
 
diff --git linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/subdev-formats.rst linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/subdev-formats.rst
index 15e11f27b4c8..b89a2f6c9155 100644
--- linux-libre-5.4-gnu1/Documentation/media/uapi/v4l/subdev-formats.rst
+++ linux-libre-5.4.261-gnu1/Documentation/media/uapi/v4l/subdev-formats.rst
@@ -7794,3 +7794,30 @@ formats.
       - 0x5001
       - Interleaved raw UYVY and JPEG image format with embedded meta-data
 	used by Samsung S3C73MX camera sensors.
+
+.. _v4l2-mbus-metadata-fmts:
+
+Metadata Formats
+^^^^^^^^^^^^^^^^
+
+This section lists all metadata formats.
+
+The following table lists the existing metadata formats.
+
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+
+.. flat-table:: Metadata formats
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - Comments
+    * .. _MEDIA-BUS-FMT-METADATA-FIXED:
+
+      - MEDIA_BUS_FMT_METADATA_FIXED
+      - 0x7001
+      - This format should be used when the same driver handles
+	both sides of the link and the bus format is a fixed
+	metadata format that is not configurable from userspace.
+	Width and height will be set to 0 for this format.
diff --git linux-libre-5.4-gnu1/Documentation/networking/af_xdp.rst linux-libre-5.4.261-gnu1/Documentation/networking/af_xdp.rst
index 83f7ae5fc045..09b3943b3b71 100644
--- linux-libre-5.4-gnu1/Documentation/networking/af_xdp.rst
+++ linux-libre-5.4.261-gnu1/Documentation/networking/af_xdp.rst
@@ -40,13 +40,13 @@ allocates memory for this UMEM using whatever means it feels is most
 appropriate (malloc, mmap, huge pages, etc). This memory area is then
 registered with the kernel using the new setsockopt XDP_UMEM_REG. The
 UMEM also has two rings: the FILL ring and the COMPLETION ring. The
-fill ring is used by the application to send down addr for the kernel
+FILL ring is used by the application to send down addr for the kernel
 to fill in with RX packet data. References to these frames will then
 appear in the RX ring once each packet has been received. The
-completion ring, on the other hand, contains frame addr that the
+COMPLETION ring, on the other hand, contains frame addr that the
 kernel has transmitted completely and can now be used again by user
 space, for either TX or RX. Thus, the frame addrs appearing in the
-completion ring are addrs that were previously transmitted using the
+COMPLETION ring are addrs that were previously transmitted using the
 TX ring. In summary, the RX and FILL rings are used for the RX path
 and the TX and COMPLETION rings are used for the TX path.
 
@@ -91,11 +91,16 @@ Concepts
 ========
 
 In order to use an AF_XDP socket, a number of associated objects need
-to be setup.
+to be setup. These objects and their options are explained in the
+following sections.
 
-Jonathan Corbet has also written an excellent article on LWN,
-"Accelerating networking with AF_XDP". It can be found at
-https://lwn.net/Articles/750845/.
+For an overview on how AF_XDP works, you can also take a look at the
+Linux Plumbers paper from 2018 on the subject:
+http://vger.kernel.org/lpc_net2018_talks/lpc18_paper_af_xdp_perf-v2.pdf. Do
+NOT consult the paper from 2017 on "AF_PACKET v4", the first attempt
+at AF_XDP. Nearly everything changed since then. Jonathan Corbet has
+also written an excellent article on LWN, "Accelerating networking
+with AF_XDP". It can be found at https://lwn.net/Articles/750845/.
 
 UMEM
 ----
@@ -113,22 +118,22 @@ the next socket B can do this by setting the XDP_SHARED_UMEM flag in
 struct sockaddr_xdp member sxdp_flags, and passing the file descriptor
 of A to struct sockaddr_xdp member sxdp_shared_umem_fd.
 
-The UMEM has two single-producer/single-consumer rings, that are used
+The UMEM has two single-producer/single-consumer rings that are used
 to transfer ownership of UMEM frames between the kernel and the
 user-space application.
 
 Rings
 -----
 
-There are a four different kind of rings: Fill, Completion, RX and
+There are a four different kind of rings: FILL, COMPLETION, RX and
 TX. All rings are single-producer/single-consumer, so the user-space
 application need explicit synchronization of multiple
 processes/threads are reading/writing to them.
 
-The UMEM uses two rings: Fill and Completion. Each socket associated
+The UMEM uses two rings: FILL and COMPLETION. Each socket associated
 with the UMEM must have an RX queue, TX queue or both. Say, that there
 is a setup with four sockets (all doing TX and RX). Then there will be
-one Fill ring, one Completion ring, four TX rings and four RX rings.
+one FILL ring, one COMPLETION ring, four TX rings and four RX rings.
 
 The rings are head(producer)/tail(consumer) based rings. A producer
 writes the data ring at the index pointed out by struct xdp_ring
@@ -146,7 +151,7 @@ The size of the rings need to be of size power of two.
 UMEM Fill Ring
 ~~~~~~~~~~~~~~
 
-The Fill ring is used to transfer ownership of UMEM frames from
+The FILL ring is used to transfer ownership of UMEM frames from
 user-space to kernel-space. The UMEM addrs are passed in the ring. As
 an example, if the UMEM is 64k and each chunk is 4k, then the UMEM has
 16 chunks and can pass addrs between 0 and 64k.
@@ -164,8 +169,8 @@ chunks mode, then the incoming addr will be left untouched.
 UMEM Completion Ring
 ~~~~~~~~~~~~~~~~~~~~
 
-The Completion Ring is used transfer ownership of UMEM frames from
-kernel-space to user-space. Just like the Fill ring, UMEM indicies are
+The COMPLETION Ring is used transfer ownership of UMEM frames from
+kernel-space to user-space. Just like the FILL ring, UMEM indices are
 used.
 
 Frames passed from the kernel to user-space are frames that has been
@@ -181,7 +186,7 @@ The RX ring is the receiving side of a socket. Each entry in the ring
 is a struct xdp_desc descriptor. The descriptor contains UMEM offset
 (addr) and the length of the data (len).
 
-If no frames have been passed to kernel via the Fill ring, no
+If no frames have been passed to kernel via the FILL ring, no
 descriptors will (or can) appear on the RX ring.
 
 The user application consumes struct xdp_desc descriptors from this
@@ -199,8 +204,24 @@ be relaxed in the future.
 The user application produces struct xdp_desc descriptors to this
 ring.
 
+Libbpf
+======
+
+Libbpf is a helper library for eBPF and XDP that makes using these
+technologies a lot simpler. It also contains specific helper functions
+in tools/lib/bpf/xsk.h for facilitating the use of AF_XDP. It
+contains two types of functions: those that can be used to make the
+setup of AF_XDP socket easier and ones that can be used in the data
+plane to access the rings safely and quickly. To see an example on how
+to use this API, please take a look at the sample application in
+samples/bpf/xdpsock_usr.c which uses libbpf for both setup and data
+plane operations.
+
+We recommend that you use this library unless you have become a power
+user. It will make your program a lot simpler.
+
 XSKMAP / BPF_MAP_TYPE_XSKMAP
-----------------------------
+============================
 
 On XDP side there is a BPF map type BPF_MAP_TYPE_XSKMAP (XSKMAP) that
 is used in conjunction with bpf_redirect_map() to pass the ingress
@@ -216,21 +237,193 @@ queue 17. Only the XDP program executing for eth0 and queue 17 will
 successfully pass data to the socket. Please refer to the sample
 application (samples/bpf/) in for an example.
 
+Configuration Flags and Socket Options
+======================================
+
+These are the various configuration flags that can be used to control
+and monitor the behavior of AF_XDP sockets.
+
+XDP_COPY and XDP_ZERO_COPY bind flags
+-------------------------------------
+
+When you bind to a socket, the kernel will first try to use zero-copy
+copy. If zero-copy is not supported, it will fall back on using copy
+mode, i.e. copying all packets out to user space. But if you would
+like to force a certain mode, you can use the following flags. If you
+pass the XDP_COPY flag to the bind call, the kernel will force the
+socket into copy mode. If it cannot use copy mode, the bind call will
+fail with an error. Conversely, the XDP_ZERO_COPY flag will force the
+socket into zero-copy mode or fail.
+
+XDP_SHARED_UMEM bind flag
+-------------------------
+
+This flag enables you to bind multiple sockets to the same UMEM, but
+only if they share the same queue id. In this mode, each socket has
+their own RX and TX rings, but the UMEM (tied to the fist socket
+created) only has a single FILL ring and a single COMPLETION
+ring. To use this mode, create the first socket and bind it in the normal
+way. Create a second socket and create an RX and a TX ring, or at
+least one of them, but no FILL or COMPLETION rings as the ones from
+the first socket will be used. In the bind call, set he
+XDP_SHARED_UMEM option and provide the initial socket's fd in the
+sxdp_shared_umem_fd field. You can attach an arbitrary number of extra
+sockets this way.
+
+What socket will then a packet arrive on? This is decided by the XDP
+program. Put all the sockets in the XSK_MAP and just indicate which
+index in the array you would like to send each packet to. A simple
+round-robin example of distributing packets is shown below:
+
+.. code-block:: c
+
+   #include <linux/bpf.h>
+   #include "bpf_helpers.h"
+
+   #define MAX_SOCKS 16
+
+   struct {
+        __uint(type, BPF_MAP_TYPE_XSKMAP);
+        __uint(max_entries, MAX_SOCKS);
+        __uint(key_size, sizeof(int));
+        __uint(value_size, sizeof(int));
+   } xsks_map SEC(".maps");
+
+   static unsigned int rr;
+
+   SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
+   {
+	rr = (rr + 1) & (MAX_SOCKS - 1);
+
+	return bpf_redirect_map(&xsks_map, rr, 0);
+   }
+
+Note, that since there is only a single set of FILL and COMPLETION
+rings, and they are single producer, single consumer rings, you need
+to make sure that multiple processes or threads do not use these rings
+concurrently. There are no synchronization primitives in the
+libbpf code that protects multiple users at this point in time.
+
+XDP_USE_NEED_WAKEUP bind flag
+-----------------------------
+
+This option adds support for a new flag called need_wakeup that is
+present in the FILL ring and the TX ring, the rings for which user
+space is a producer. When this option is set in the bind call, the
+need_wakeup flag will be set if the kernel needs to be explicitly
+woken up by a syscall to continue processing packets. If the flag is
+zero, no syscall is needed.
+
+If the flag is set on the FILL ring, the application needs to call
+poll() to be able to continue to receive packets on the RX ring. This
+can happen, for example, when the kernel has detected that there are no
+more buffers on the FILL ring and no buffers left on the RX HW ring of
+the NIC. In this case, interrupts are turned off as the NIC cannot
+receive any packets (as there are no buffers to put them in), and the
+need_wakeup flag is set so that user space can put buffers on the
+FILL ring and then call poll() so that the kernel driver can put these
+buffers on the HW ring and start to receive packets.
+
+If the flag is set for the TX ring, it means that the application
+needs to explicitly notify the kernel to send any packets put on the
+TX ring. This can be accomplished either by a poll() call, as in the
+RX path, or by calling sendto().
+
+An example of how to use this flag can be found in
+samples/bpf/xdpsock_user.c. An example with the use of libbpf helpers
+would look like this for the TX path:
+
+.. code-block:: c
+
+   if (xsk_ring_prod__needs_wakeup(&my_tx_ring))
+      sendto(xsk_socket__fd(xsk_handle), NULL, 0, MSG_DONTWAIT, NULL, 0);
+
+I.e., only use the syscall if the flag is set.
+
+We recommend that you always enable this mode as it usually leads to
+better performance especially if you run the application and the
+driver on the same core, but also if you use different cores for the
+application and the kernel driver, as it reduces the number of
+syscalls needed for the TX path.
+
+XDP_{RX|TX|UMEM_FILL|UMEM_COMPLETION}_RING setsockopts
+------------------------------------------------------
+
+These setsockopts sets the number of descriptors that the RX, TX,
+FILL, and COMPLETION rings respectively should have. It is mandatory
+to set the size of at least one of the RX and TX rings. If you set
+both, you will be able to both receive and send traffic from your
+application, but if you only want to do one of them, you can save
+resources by only setting up one of them. Both the FILL ring and the
+COMPLETION ring are mandatory if you have a UMEM tied to your socket,
+which is the normal case. But if the XDP_SHARED_UMEM flag is used, any
+socket after the first one does not have a UMEM and should in that
+case not have any FILL or COMPLETION rings created.
+
+XDP_UMEM_REG setsockopt
+-----------------------
+
+This setsockopt registers a UMEM to a socket. This is the area that
+contain all the buffers that packet can recide in. The call takes a
+pointer to the beginning of this area and the size of it. Moreover, it
+also has parameter called chunk_size that is the size that the UMEM is
+divided into. It can only be 2K or 4K at the moment. If you have an
+UMEM area that is 128K and a chunk size of 2K, this means that you
+will be able to hold a maximum of 128K / 2K = 64 packets in your UMEM
+area and that your largest packet size can be 2K.
+
+There is also an option to set the headroom of each single buffer in
+the UMEM. If you set this to N bytes, it means that the packet will
+start N bytes into the buffer leaving the first N bytes for the
+application to use. The final option is the flags field, but it will
+be dealt with in separate sections for each UMEM flag.
+
+SO_BINDTODEVICE setsockopt
+--------------------------
+
+This is a generic SOL_SOCKET option that can be used to tie AF_XDP
+socket to a particular network interface.  It is useful when a socket
+is created by a privileged process and passed to a non-privileged one.
+Once the option is set, kernel will refuse attempts to bind that socket
+to a different interface.  Updating the value requires CAP_NET_RAW.
+
+XDP_STATISTICS getsockopt
+-------------------------
+
+Gets drop statistics of a socket that can be useful for debug
+purposes. The supported statistics are shown below:
+
+.. code-block:: c
+
+   struct xdp_statistics {
+	  __u64 rx_dropped; /* Dropped for reasons other than invalid desc */
+	  __u64 rx_invalid_descs; /* Dropped due to invalid descriptor */
+	  __u64 tx_invalid_descs; /* Dropped due to invalid descriptor */
+   };
+
+XDP_OPTIONS getsockopt
+----------------------
+
+Gets options from an XDP socket. The only one supported so far is
+XDP_OPTIONS_ZEROCOPY which tells you if zero-copy is on or not.
+
 Usage
 =====
 
-In order to use AF_XDP sockets there are two parts needed. The
+In order to use AF_XDP sockets two parts are needed. The
 user-space application and the XDP program. For a complete setup and
 usage example, please refer to the sample application. The user-space
 side is xdpsock_user.c and the XDP side is part of libbpf.
 
-The XDP code sample included in tools/lib/bpf/xsk.c is the following::
+The XDP code sample included in tools/lib/bpf/xsk.c is the following:
+
+.. code-block:: c
 
    SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
    {
        int index = ctx->rx_queue_index;
 
-       // A set entry here means that the correspnding queue_id
+       // A set entry here means that the corresponding queue_id
        // has an active AF_XDP socket bound to it.
        if (bpf_map_lookup_elem(&xsks_map, &index))
            return bpf_redirect_map(&xsks_map, index, 0);
@@ -238,7 +431,10 @@ The XDP code sample included in tools/lib/bpf/xsk.c is the following::
        return XDP_PASS;
    }
 
-Naive ring dequeue and enqueue could look like this::
+A simple but not so performance ring dequeue and enqueue could look
+like this:
+
+.. code-block:: c
 
     // struct xdp_rxtx_ring {
     // 	__u32 *producer;
@@ -287,17 +483,16 @@ Naive ring dequeue and enqueue could look like this::
         return 0;
     }
 
-
-For a more optimized version, please refer to the sample application.
+But please use the libbpf functions as they are optimized and ready to
+use. Will make your life easier.
 
 Sample application
 ==================
 
 There is a xdpsock benchmarking/test application included that
-demonstrates how to use AF_XDP sockets with both private and shared
-UMEMs. Say that you would like your UDP traffic from port 4242 to end
-up in queue 16, that we will enable AF_XDP on. Here, we use ethtool
-for this::
+demonstrates how to use AF_XDP sockets with private UMEMs. Say that
+you would like your UDP traffic from port 4242 to end up in queue 16,
+that we will enable AF_XDP on. Here, we use ethtool for this::
 
       ethtool -N p3p2 rx-flow-hash udp4 fn
       ethtool -N p3p2 flow-type udp4 src-port 4242 dst-port 4242 \
@@ -311,13 +506,18 @@ using::
 For XDP_SKB mode, use the switch "-S" instead of "-N" and all options
 can be displayed with "-h", as usual.
 
+This sample application uses libbpf to make the setup and usage of
+AF_XDP simpler. If you want to know how the raw uapi of AF_XDP is
+really used to make something more advanced, take a look at the libbpf
+code in tools/lib/bpf/xsk.[ch].
+
 FAQ
 =======
 
 Q: I am not seeing any traffic on the socket. What am I doing wrong?
 
 A: When a netdev of a physical NIC is initialized, Linux usually
-   allocates one Rx and Tx queue pair per core. So on a 8 core system,
+   allocates one RX and TX queue pair per core. So on a 8 core system,
    queue ids 0 to 7 will be allocated, one per core. In the AF_XDP
    bind call or the xsk_socket__create libbpf function call, you
    specify a specific queue id to bind to and it is only the traffic
@@ -343,9 +543,21 @@ A: When a netdev of a physical NIC is initialized, Linux usually
      sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \
      4242 action 2
 
-   A number of other ways are possible all up to the capabilitites of
+   A number of other ways are possible all up to the capabilities of
    the NIC you have.
 
+Q: Can I use the XSKMAP to implement a switch betwen different umems
+   in copy mode?
+
+A: The short answer is no, that is not supported at the moment. The
+   XSKMAP can only be used to switch traffic coming in on queue id X
+   to sockets bound to the same queue id X. The XSKMAP can contain
+   sockets bound to different queue ids, for example X and Y, but only
+   traffic goming in from queue id Y can be directed to sockets bound
+   to the same queue id Y. In zero-copy mode, you should use the
+   switch, or other distribution mechanism, in your NIC to direct
+   traffic to the correct queue id and socket.
+
 Credits
 =======
 
diff --git linux-libre-5.4-gnu1/Documentation/networking/bonding.txt linux-libre-5.4.261-gnu1/Documentation/networking/bonding.txt
index e3abfbd32f71..b020e6ce6dd4 100644
--- linux-libre-5.4-gnu1/Documentation/networking/bonding.txt
+++ linux-libre-5.4.261-gnu1/Documentation/networking/bonding.txt
@@ -191,11 +191,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-5.4-gnu1/Documentation/networking/decnet.txt linux-libre-5.4.261-gnu1/Documentation/networking/decnet.txt
deleted file mode 100644
index d192f8b9948b..000000000000
--- linux-libre-5.4-gnu1/Documentation/networking/decnet.txt
+++ /dev/null
@@ -1,230 +0,0 @@
-                    Linux DECnet Networking Layer Information
-                   ===========================================
-
-1) Other documentation....
-
-   o Project Home Pages
-       http://www.chygwyn.com/                      	    - Kernel info
-       http://linux-decnet.sourceforge.net/                - Userland tools
-       http://www.sourceforge.net/projects/linux-decnet/   - Status page
-
-2) Configuring the kernel
-
-Be sure to turn on the following options:
-
-    CONFIG_DECNET (obviously)
-    CONFIG_PROC_FS (to see what's going on)
-    CONFIG_SYSCTL (for easy configuration)
-
-if you want to try out router support (not properly debugged yet)
-you'll need the following options as well...
-
-    CONFIG_DECNET_ROUTER (to be able to add/delete routes)
-    CONFIG_NETFILTER (will be required for the DECnet routing daemon)
-
-Don't turn on SIOCGIFCONF support for DECnet unless you are really sure
-that you need it, in general you won't and it can cause ifconfig to
-malfunction.
-
-Run time configuration has changed slightly from the 2.4 system. If you
-want to configure an endnode, then the simplified procedure is as follows:
-
- o Set the MAC address on your ethernet card before starting _any_ other
-   network protocols.
-
-As soon as your network card is brought into the UP state, DECnet should
-start working. If you need something more complicated or are unsure how
-to set the MAC address, see the next section. Also all configurations which
-worked with 2.4 will work under 2.5 with no change.
-
-3) Command line options
-
-You can set a DECnet address on the kernel command line for compatibility
-with the 2.4 configuration procedure, but in general it's not needed any more.
-If you do st a DECnet address on the command line, it has only one purpose
-which is that its added to the addresses on the loopback device.
-
-With 2.4 kernels, DECnet would only recognise addresses as local if they
-were added to the loopback device. In 2.5, any local interface address
-can be used to loop back to the local machine. Of course this does not
-prevent you adding further addresses to the loopback device if you
-want to.
-
-N.B. Since the address list of an interface determines the addresses for
-which "hello" messages are sent, if you don't set an address on the loopback
-interface then you won't see any entries in /proc/net/neigh for the local
-host until such time as you start a connection. This doesn't affect the
-operation of the local communications in any other way though.
-
-The kernel command line takes options looking like the following:
-
-    decnet.addr=1,2
-
-the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels
-and early 2.3.xx kernels, you must use a comma when specifying the
-DECnet address like this. For more recent 2.3.xx kernels, you may
-use almost any character except space, although a `.` would be the most
-obvious choice :-)
-
-There used to be a third number specifying the node type. This option
-has gone away in favour of a per interface node type. This is now set
-using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
-set with a single digit, 0=EndNode, 1=L1 Router and  2=L2 Router.
-
-There are also equivalent options for modules. The node address can
-also be set through the /proc/sys/net/decnet/ files, as can other system
-parameters.
-
-Currently the only supported devices are ethernet and ip_gre. The
-ethernet address of your ethernet card has to be set according to the DECnet
-address of the node in order for it to be autoconfigured (and then appear in
-/proc/net/decnet_dev). There is a utility available at the above
-FTP sites called dn2ethaddr which can compute the correct ethernet
-address to use. The address can be set by ifconfig either before or
-at the time the device is brought up. If you are using RedHat you can
-add the line:
-
-    MACADDR=AA:00:04:00:03:04
-
-or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or
-wherever your network card's configuration lives. Setting the MAC address
-of your ethernet card to an address starting with "hi-ord" will cause a
-DECnet address which matches to be added to the interface (which you can
-verify with iproute2).
-
-The default device for routing can be set through the /proc filesystem
-by setting /proc/sys/net/decnet/default_device to the
-device you want DECnet to route packets out of when no specific route
-is available. Usually this will be eth0, for example:
-
-    echo -n "eth0" >/proc/sys/net/decnet/default_device
-
-If you don't set the default device, then it will default to the first
-ethernet card which has been autoconfigured as described above. You can
-confirm that by looking in the default_device file of course.
-
-There is a list of what the other files under /proc/sys/net/decnet/ do
-on the kernel patch web site (shown above).
-
-4) Run time kernel configuration
-
-This is either done through the sysctl/proc interface (see the kernel web
-pages for details on what the various options do) or through the iproute2
-package in the same way as IPv4/6 configuration is performed.
-
-Documentation for iproute2 is included with the package, although there is
-as yet no specific section on DECnet, most of the features apply to both
-IP and DECnet, albeit with DECnet addresses instead of IP addresses and
-a reduced functionality.
-
-If you want to configure a DECnet router you'll need the iproute2 package
-since its the _only_ way to add and delete routes currently. Eventually
-there will be a routing daemon to send and receive routing messages for
-each interface and update the kernel routing tables accordingly. The
-routing daemon will use netfilter to listen to routing packets, and
-rtnetlink to update the kernels routing tables. 
-
-The DECnet raw socket layer has been removed since it was there purely
-for use by the routing daemon which will now use netfilter (a much cleaner
-and more generic solution) instead.
-
-5) How can I tell if its working ?
-
-Here is a quick guide of what to look for in order to know if your DECnet
-kernel subsystem is working.
-
-   - Is the node address set (see /proc/sys/net/decnet/node_address)
-   - Is the node of the correct type 
-                             (see /proc/sys/net/decnet/conf/<dev>/forwarding)
-   - Is the Ethernet MAC address of each Ethernet card set to match
-     the DECnet address. If in doubt use the dn2ethaddr utility available
-     at the ftp archive.
-   - If the previous two steps are satisfied, and the Ethernet card is up,
-     you should find that it is listed in /proc/net/decnet_dev and also
-     that it appears as a directory in /proc/sys/net/decnet/conf/. The
-     loopback device (lo) should also appear and is required to communicate
-     within a node.
-   - If you have any DECnet routers on your network, they should appear
-     in /proc/net/decnet_neigh, otherwise this file will only contain the
-     entry for the node itself (if it doesn't check to see if lo is up).
-   - If you want to send to any node which is not listed in the
-     /proc/net/decnet_neigh file, you'll need to set the default device
-     to point to an Ethernet card with connection to a router. This is
-     again done with the /proc/sys/net/decnet/default_device file.
-   - Try starting a simple server and client, like the dnping/dnmirror
-     over the loopback interface. With luck they should communicate.
-     For this step and those after, you'll need the DECnet library
-     which can be obtained from the above ftp sites as well as the
-     actual utilities themselves.
-   - If this seems to work, then try talking to a node on your local
-     network, and see if you can obtain the same results.
-   - At this point you are on your own... :-)
-
-6) How to send a bug report
-
-If you've found a bug and want to report it, then there are several things
-you can do to help me work out exactly what it is that is wrong. Useful
-information (_most_ of which _is_ _essential_) includes:
-
- - What kernel version are you running ?
- - What version of the patch are you running ?
- - How far though the above set of tests can you get ?
- - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ?
- - Which services are you running ?
- - Which client caused the problem ?
- - How much data was being transferred ?
- - Was the network congested ?
- - How can the problem be reproduced ?
- - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of 
-   tcpdump don't understand how to dump DECnet properly, so including
-   the hex listing of the packet contents is _essential_, usually the -x flag.
-   You may also need to increase the length grabbed with the -s flag. The
-   -e flag also provides very useful information (ethernet MAC addresses))
-
-7) MAC FAQ
-
-A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet
-interact and how to get the best performance from your hardware. 
-
-Ethernet cards are designed to normally only pass received network frames 
-to a host computer when they are addressed to it, or to the broadcast address.
-
-Linux has an interface which allows the setting of extra addresses for
-an ethernet card to listen to. If the ethernet card supports it, the
-filtering operation will be done in hardware, if not the extra unwanted packets
-received will be discarded by the host computer. In the latter case,
-significant processor time and bus bandwidth can be used up on a busy
-network (see the NAPI documentation for a longer explanation of these
-effects).
-
-DECnet makes use of this interface to allow running DECnet on an ethernet 
-card which has already been configured using TCP/IP (presumably using the 
-built in MAC address of the card, as usual) and/or to allow multiple DECnet
-addresses on each physical interface. If you do this, be aware that if your
-ethernet card doesn't support perfect hashing in its MAC address filter
-then your computer will be doing more work than required. Some cards
-will simply set themselves into promiscuous mode in order to receive
-packets from the DECnet specified addresses. So if you have one of these
-cards its better to set the MAC address of the card as described above
-to gain the best efficiency. Better still is to use a card which supports
-NAPI as well.
-
-
-8) Mailing list
-
-If you are keen to get involved in development, or want to ask questions
-about configuration, or even just report bugs, then there is a mailing
-list that you can join, details are at:
-
-http://sourceforge.net/mail/?group_id=4993
-
-9) Legal Info
-
-The Linux DECnet project team have placed their code under the GPL. The
-software is provided "as is" and without warranty express or implied.
-DECnet is a trademark of Compaq. This software is not a product of
-Compaq. We acknowledge the help of people at Compaq in providing extra
-documentation above and beyond what was previously publicly available.
-
-Steve Whitehouse <SteveW@ACM.org>
-
diff --git linux-libre-5.4-gnu1/Documentation/networking/ip-sysctl.txt linux-libre-5.4.261-gnu1/Documentation/networking/ip-sysctl.txt
index 8d4ad1d1ae26..5cf601c94e35 100644
--- linux-libre-5.4-gnu1/Documentation/networking/ip-sysctl.txt
+++ linux-libre-5.4.261-gnu1/Documentation/networking/ip-sysctl.txt
@@ -876,7 +876,7 @@ cipso_cache_enable - BOOLEAN
 cipso_cache_bucket_size - INTEGER
 	The CIPSO label cache consists of a fixed size hash table with each
 	hash bucket containing a number of cache entries.  This variable limits
-	the number of entries in each hash bucket; the larger the value the
+	the number of entries in each hash bucket; the larger the value is, the
 	more CIPSO label mappings that can be cached.  When the number of
 	entries in a given hash bucket reaches this limit adding new entries
 	causes the oldest entry in the bucket to be removed to make room.
@@ -953,7 +953,7 @@ ip_nonlocal_bind - BOOLEAN
 	which can be quite useful - but may break some applications.
 	Default: 0
 
-ip_dynaddr - BOOLEAN
+ip_dynaddr - INTEGER
 	If set non-zero, enables support for dynamic addresses.
 	If set to a non-zero value larger than 1, a kernel log
 	message will be printed when dynamic address rewriting
@@ -1000,12 +1000,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER
@@ -2282,7 +2284,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
diff --git linux-libre-5.4-gnu1/Documentation/networking/ipvs-sysctl.txt linux-libre-5.4.261-gnu1/Documentation/networking/ipvs-sysctl.txt
index 056898685d40..fc531c29a2e8 100644
--- linux-libre-5.4-gnu1/Documentation/networking/ipvs-sysctl.txt
+++ linux-libre-5.4.261-gnu1/Documentation/networking/ipvs-sysctl.txt
@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.4-gnu1/Documentation/networking/j1939.rst linux-libre-5.4.261-gnu1/Documentation/networking/j1939.rst
index dc60b13fcd09..4b0db514b201 100644
--- linux-libre-5.4-gnu1/Documentation/networking/j1939.rst
+++ linux-libre-5.4.261-gnu1/Documentation/networking/j1939.rst
@@ -339,7 +339,7 @@ To claim an address following code example can be used:
 			.pgn = J1939_PGN_ADDRESS_CLAIMED,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
-			.pgn = J1939_PGN_ADDRESS_REQUEST,
+			.pgn = J1939_PGN_REQUEST,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
 			.pgn = J1939_PGN_ADDRESS_COMMANDED,
@@ -414,8 +414,8 @@ Send:
 		.can_family = AF_CAN,
 		.can_addr.j1939 = {
 			.name = J1939_NO_NAME;
-			.pgn = 0x30,
-			.addr = 0x12300,
+			.addr = 0x30,
+			.pgn = 0x12300,
 		},
 	};
 
diff --git linux-libre-5.4-gnu1/Documentation/networking/nf_flowtable.txt linux-libre-5.4.261-gnu1/Documentation/networking/nf_flowtable.txt
index ca2136c76042..0bf32d1121be 100644
--- linux-libre-5.4-gnu1/Documentation/networking/nf_flowtable.txt
+++ linux-libre-5.4.261-gnu1/Documentation/networking/nf_flowtable.txt
@@ -76,7 +76,7 @@ flowtable and add one rule to your forward chain.
 
         table inet x {
 		flowtable f {
-			hook ingress priority 0 devices = { eth0, eth1 };
+			hook ingress priority 0; devices = { eth0, eth1 };
 		}
                 chain y {
                         type filter hook forward priority 0; policy accept;
diff --git linux-libre-5.4-gnu1/Documentation/power/runtime_pm.rst linux-libre-5.4.261-gnu1/Documentation/power/runtime_pm.rst
index 2c2ec99b5088..78bef529464f 100644
--- linux-libre-5.4-gnu1/Documentation/power/runtime_pm.rst
+++ linux-libre-5.4.261-gnu1/Documentation/power/runtime_pm.rst
@@ -382,6 +382,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       nonzero, increment the counter and return 1; otherwise return 0 without
       changing the counter
 
+  `int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count);`
+    - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
+      runtime PM status is RPM_ACTIVE, and either ign_usage_count is true
+      or the device's usage_count is non-zero, increment the counter and
+      return 1; otherwise return 0 without changing the counter
+
   `void pm_runtime_put_noidle(struct device *dev);`
     - decrement the device's usage counter
 
diff --git linux-libre-5.4-gnu1/Documentation/process/code-of-conduct-interpretation.rst linux-libre-5.4.261-gnu1/Documentation/process/code-of-conduct-interpretation.rst
index e899f14a4ba2..43da2cc2e3b9 100644
--- linux-libre-5.4-gnu1/Documentation/process/code-of-conduct-interpretation.rst
+++ linux-libre-5.4.261-gnu1/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the
diff --git linux-libre-5.4-gnu1/Documentation/process/stable-kernel-rules.rst linux-libre-5.4.261-gnu1/Documentation/process/stable-kernel-rules.rst
index 06f743b612c4..bb53707f72cc 100644
--- linux-libre-5.4-gnu1/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.4.261-gnu1/Documentation/process/stable-kernel-rules.rst
@@ -174,7 +174,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.4-gnu1/Documentation/process/submitting-patches.rst linux-libre-5.4.261-gnu1/Documentation/process/submitting-patches.rst
index fb56297f70dc..857be0d44e80 100644
--- linux-libre-5.4-gnu1/Documentation/process/submitting-patches.rst
+++ linux-libre-5.4.261-gnu1/Documentation/process/submitting-patches.rst
@@ -133,7 +133,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
diff --git linux-libre-5.4-gnu1/Documentation/scsi/smartpqi.txt linux-libre-5.4.261-gnu1/Documentation/scsi/smartpqi.txt
index 201f80c7c050..df129f55ace5 100644
--- linux-libre-5.4-gnu1/Documentation/scsi/smartpqi.txt
+++ linux-libre-5.4.261-gnu1/Documentation/scsi/smartpqi.txt
@@ -29,7 +29,7 @@ smartpqi specific entries in /sys
   smartpqi host attributes:
   -------------------------
   /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/version
+  /sys/class/scsi_host/host*/driver_version
 
   The host rescan attribute is a write only attribute. Writing to this
   attribute will trigger the driver to scan for new, changed, or removed
diff --git linux-libre-5.4-gnu1/Documentation/sound/hd-audio/index.rst linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/index.rst
index f8a72ffffe66..6e12de9fc34e 100644
--- linux-libre-5.4-gnu1/Documentation/sound/hd-audio/index.rst
+++ linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/index.rst
@@ -8,3 +8,4 @@ HD-Audio
    models
    controls
    dp-mst
+   realtek-pc-beep
diff --git linux-libre-5.4-gnu1/Documentation/sound/hd-audio/models.rst linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/models.rst
index 11298f0ce44d..71ac38739d27 100644
--- linux-libre-5.4-gnu1/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/models.rst
@@ -216,8 +216,6 @@ alc298-dell-aio
     ALC298 fixups on Dell AIO machines
 alc275-dell-xps
     ALC275 fixups on Dell XPS models
-alc256-dell-xps13
-    ALC256 fixups on Dell XPS13
 lenovo-spk-noise
     Workaround for speaker noise on Lenovo machines
 lenovo-hotkey
@@ -263,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -700,7 +702,7 @@ ref
 no-jd
     BIOS setup but without jack-detection
 intel
-    Intel DG45* mobos
+    Intel D*45* mobos
 dell-m6-amic
     Dell desktops/laptops with analog mics
 dell-m6-dmic
diff --git linux-libre-5.4-gnu1/Documentation/sound/hd-audio/realtek-pc-beep.rst linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/realtek-pc-beep.rst
new file mode 100644
index 000000000000..be47c6f76a6e
--- /dev/null
+++ linux-libre-5.4.261-gnu1/Documentation/sound/hd-audio/realtek-pc-beep.rst
@@ -0,0 +1,129 @@
+===============================
+Realtek PC Beep Hidden Register
+===============================
+
+This file documents the "PC Beep Hidden Register", which is present in certain
+Realtek HDA codecs and controls a muxer and pair of passthrough mixers that can
+route audio between pins but aren't themselves exposed as HDA widgets. As far
+as I can tell, these hidden routes are designed to allow flexible PC Beep output
+for codecs that don't have mixer widgets in their output paths. Why it's easier
+to hide a mixer behind an undocumented vendor register than to just expose it
+as a widget, I have no idea.
+
+Register Description
+====================
+
+The register is accessed via processing coefficient 0x36 on NID 20h. Bits not
+identified below have no discernible effect on my machine, a Dell XPS 13 9350::
+
+  MSB                           LSB
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | |h|S|L|         | B |R|       | Known bits
+  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+  |0|0|1|1|  0x7  |0|0x0|1|  0x7  | Reset value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+1Ah input select (B): 2 bits
+  When zero, expose the PC Beep line (from the internal beep generator, when
+  enabled with the Set Beep Generation verb on NID 01h, or else from the
+  external PCBEEP pin) on the 1Ah pin node. When nonzero, expose the headphone
+  jack (or possibly Line In on some machines) input instead. If PC Beep is
+  selected, the 1Ah boost control has no effect.
+
+Amplify 1Ah loopback, left (L): 1 bit
+  Amplify the left channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Amplify 1Ah loopback, right (R): 1 bit
+  Amplify the right channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Loopback 1Ah to 21h [active low] (h): 1 bit
+  When zero, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 21h (headphone jack on my machine). Mixed signal respects the mute
+  setting on 21h.
+
+Loopback 1Ah to 14h (S): 1 bit
+  When one, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 14h (internal speaker on my machine). Mixed signal **ignores** the mute
+  setting on 14h and is present whenever 14h is configured as an output.
+
+Path diagrams
+=============
+
+1Ah input selection (DIV is the PC Beep divider set on NID 01h)::
+
+  <Beep generator>   <PCBEEP pin>    <Headphone jack>
+          |                |                |
+          +--DIV--+--!DIV--+       {1Ah boost control}
+                  |                         |
+                  +--(b == 0)--+--(b != 0)--+
+                               |
+               >1Ah (Beep/Headphone Mic/Line In)<
+
+Loopback of 1Ah to 21h/14h::
+
+               <1Ah (Beep/Headphone Mic/Line In)>
+                               |
+                        {amplify if L/R}
+                               |
+                  +-----!h-----+-----S-----+
+                  |                        |
+          {21h mute control}               |
+                  |                        |
+          >21h (Headphone)<     >14h (Internal Speaker)<
+
+Background
+==========
+
+All Realtek HDA codecs have a vendor-defined widget with node ID 20h which
+provides access to a bank of registers that control various codec functions.
+Registers are read and written via the standard HDA processing coefficient
+verbs (Set/Get Coefficient Index, Set/Get Processing Coefficient). The node is
+named "Realtek Vendor Registers" in public datasheets' verb listings and,
+apart from that, is entirely undocumented.
+
+This particular register, exposed at coefficient 0x36 and named in commits from
+Realtek, is of note: unlike most registers, which seem to control detailed
+amplifier parameters not in scope of the HDA specification, it controls audio
+routing which could just as easily have been defined using standard HDA mixer
+and selector widgets.
+
+Specifically, it selects between two sources for the input pin widget with Node
+ID (NID) 1Ah: the widget's signal can come either from an audio jack (on my
+laptop, a Dell XPS 13 9350, it's the headphone jack, but comments in Realtek
+commits indicate that it might be a Line In on some machines) or from the PC
+Beep line (which is itself multiplexed between the codec's internal beep
+generator and external PCBEEP pin, depending on if the beep generator is
+enabled via verbs on NID 01h). Additionally, it can mix (with optional
+amplification) that signal onto the 21h and/or 14h output pins.
+
+The register's reset value is 0x3717, corresponding to PC Beep on 1Ah that is
+then amplified and mixed into both the headphones and the speakers. Not only
+does this violate the HDA specification, which says that "[a vendor defined
+beep input pin] connection may be maintained *only* while the Link reset
+(**RST#**) is asserted", it means that we cannot ignore the register if we care
+about the input that 1Ah would otherwise expose or if the PCBEEP trace is
+poorly shielded and picks up chassis noise (both of which are the case on my
+machine).
+
+Unfortunately, there are lots of ways to get this register configuration wrong.
+Linux, it seems, has gone through most of them. For one, the register resets
+after S3 suspend: judging by existing code, this isn't the case for all vendor
+registers, and it's led to some fixes that improve behavior on cold boot but
+don't last after suspend. Other fixes have successfully switched the 1Ah input
+away from PC Beep but have failed to disable both loopback paths. On my
+machine, this means that the headphone input is amplified and looped back to
+the headphone output, which uses the exact same pins! As you might expect, this
+causes terrible headphone noise, the character of which is controlled by the
+1Ah boost control. (If you've seen instructions online to fix XPS 13 headphone
+noise by changing "Headphone Mic Boost" in ALSA, now you know why.)
+
+The information here has been obtained through black-box reverse engineering of
+the ALC256 codec's behavior and is not guaranteed to be correct. It likely
+also applies for the ALC255, ALC257, ALC235, and ALC236, since those codecs
+seem to be close relatives of the ALC256. (They all share one initialization
+function.) Additionally, other codecs like the ALC225 and ALC285 also have this
+register, judging by existing fixups in ``patch_realtek.c``, but specific
+data (e.g. node IDs, bit positions, pin mappings) for those codecs may differ
+from what I've described here.
diff --git linux-libre-5.4-gnu1/Documentation/sphinx/load_config.py linux-libre-5.4.261-gnu1/Documentation/sphinx/load_config.py
index eeb394b39e2c..8b416bfd75ac 100644
--- linux-libre-5.4-gnu1/Documentation/sphinx/load_config.py
+++ linux-libre-5.4.261-gnu1/Documentation/sphinx/load_config.py
@@ -3,7 +3,7 @@
 
 import os
 import sys
-from sphinx.util.pycompat import execfile_
+from sphinx.util.osutil import fs_encoding
 
 # ------------------------------------------------------------------------------
 def loadConfig(namespace):
@@ -48,7 +48,9 @@ def loadConfig(namespace):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
             config['__file__'] = config_file
-            execfile_(config_file, config)
+            with open(config_file, 'rb') as f:
+                code = compile(f.read(), fs_encoding, 'exec')
+                exec(code, config)
             del config['__file__']
             namespace.update(config)
         else:
diff --git linux-libre-5.4-gnu1/Documentation/sphinx/parse-headers.pl linux-libre-5.4.261-gnu1/Documentation/sphinx/parse-headers.pl
index c518050ffc3f..0dcf369ab904 100755
--- linux-libre-5.4-gnu1/Documentation/sphinx/parse-headers.pl
+++ linux-libre-5.4.261-gnu1/Documentation/sphinx/parse-headers.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 use strict;
 use Text::Tabs;
 use Getopt::Long;
diff --git linux-libre-5.4-gnu1/Documentation/target/tcm_mod_builder.py linux-libre-5.4.261-gnu1/Documentation/target/tcm_mod_builder.py
index 95d6e31f1e3a..85e496086d6e 100755
--- linux-libre-5.4-gnu1/Documentation/target/tcm_mod_builder.py
+++ linux-libre-5.4.261-gnu1/Documentation/target/tcm_mod_builder.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD
 #
 # Copyright (c) 2010 Rising Tide Systems
diff --git linux-libre-5.4-gnu1/Documentation/trace/histogram.rst linux-libre-5.4.261-gnu1/Documentation/trace/histogram.rst
index 8408670d0328..931f3b71745a 100644
--- linux-libre-5.4-gnu1/Documentation/trace/histogram.rst
+++ linux-libre-5.4.261-gnu1/Documentation/trace/histogram.rst
@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
diff --git linux-libre-5.4-gnu1/Documentation/trace/postprocess/decode_msr.py linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/decode_msr.py
index 0ab40e0db580..aa9cc7abd5c2 100644
--- linux-libre-5.4-gnu1/Documentation/trace/postprocess/decode_msr.py
+++ linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/decode_msr.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # add symbolic names to read_msr / write_msr in trace
 # decode_msr msr-index.h < trace
 import sys
diff --git linux-libre-5.4-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
index 0a120aae33ce..b9b7d80c2f9d 100644
--- linux-libre-5.4-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
+++ linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC (proof of concept or piece of crap, take your pick) for reading the
 # text representation of trace output related to page allocation. It makes an attempt
 # to extract some high-level information on what is going on. The accuracy of the parser
diff --git linux-libre-5.4-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 995da15b16ca..2f4e39875fb3 100644
--- linux-libre-5.4-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ linux-libre-5.4.261-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC for reading the text representation of trace output related to
 # page reclaim. It makes an attempt to extract some high-level information on
 # what is going on. The accuracy of the parser may vary
diff --git linux-libre-5.4-gnu1/Documentation/userspace-api/seccomp_filter.rst linux-libre-5.4.261-gnu1/Documentation/userspace-api/seccomp_filter.rst
index bd9165241b6c..6efb41cc8072 100644
--- linux-libre-5.4-gnu1/Documentation/userspace-api/seccomp_filter.rst
+++ linux-libre-5.4.261-gnu1/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)``  (or ``poll()``) on a
 seccomp notification fd to receive a ``struct seccomp_notif``, which contains
 five members: the input length of the structure, a unique-per-filter ``id``,
 the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
 
 It is worth noting that ``struct seccomp_data`` contains the values of register
 arguments to the syscall, but does not contain pointers to memory. The task's
diff --git linux-libre-5.4-gnu1/Documentation/virt/kvm/api.txt linux-libre-5.4.261-gnu1/Documentation/virt/kvm/api.txt
index 4833904d32a5..180475bcd671 100644
--- linux-libre-5.4-gnu1/Documentation/virt/kvm/api.txt
+++ linux-libre-5.4.261-gnu1/Documentation/virt/kvm/api.txt
@@ -172,6 +172,9 @@ is dependent on the CPU capability and the kernel configuration. The limit can
 be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
 ioctl() at run-time.
 
+Creation of the VM will fail if the requested IPA size (whether it is
+implicit or explicit) is unsupported on the host.
+
 Please note that configuring the IPA size does not affect the capability
 exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
 size of the address translated by the stage2 level (guest physical to
@@ -1132,6 +1135,9 @@ field userspace_addr, which must point at user addressable memory for
 the entire memory slot size.  Any object may back this memory, including
 anonymous memory, ordinary files, and hugetlbfs.
 
+On architectures that support a form of address tagging, userspace_addr must
+be an untagged address.
+
 It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
 be identical.  This allows large pages in the guest to be backed by large
 pages in the host.
@@ -3609,6 +3615,18 @@ Type: vm ioctl
 Parameters: struct kvm_s390_cmma_log (in, out)
 Returns: 0 on success, a negative value on error
 
+Errors:
+
+  ======     =============================================================
+  ENOMEM     not enough memory can be allocated to complete the task
+  ENXIO      if CMMA is not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled
+  EINVAL     if KVM_S390_CMMA_PEEK is not set but dirty tracking has been
+             disabled (and thus migration mode was automatically disabled)
+  EFAULT     if the userspace address is invalid or if no page table is
+             present for the addresses (e.g. when using hugepages).
+  ======     =============================================================
+
 This ioctl is used to get the values of the CMMA bits on the s390
 architecture. It is meant to be used in two scenarios:
 - During live migration to save the CMMA values. Live migration needs
@@ -3685,12 +3703,6 @@ mask is unused.
 
 values points to the userspace buffer where the result will be stored.
 
-This ioctl can fail with -ENOMEM if not enough memory can be allocated to
-complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if
-KVM_S390_CMMA_PEEK is not set but migration mode was not enabled, with
--EFAULT if the userspace address is invalid or if no page table is
-present for the addresses (e.g. when using hugepages).
-
 4.108 KVM_S390_SET_CMMA_BITS
 
 Capability: KVM_CAP_S390_CMMA_MIGRATION
@@ -4444,9 +4456,11 @@ EOI was received.
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
 			__u32 type;
+			__u32 pad1;
 			union {
 				struct {
 					__u32 msr;
+					__u32 pad2;
 					__u64 control;
 					__u64 evt_page;
 					__u64 msg_page;
diff --git linux-libre-5.4-gnu1/Documentation/virt/kvm/devices/vm.txt linux-libre-5.4.261-gnu1/Documentation/virt/kvm/devices/vm.txt
index 4ffb82b02468..38ec142a4a84 100644
--- linux-libre-5.4-gnu1/Documentation/virt/kvm/devices/vm.txt
+++ linux-libre-5.4.261-gnu1/Documentation/virt/kvm/devices/vm.txt
@@ -254,6 +254,10 @@ Allows userspace to start migration mode, needed for PGSTE migration.
 Setting this attribute when migration mode is already active will have
 no effects.
 
+Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
+dirty tracking is disabled on any memslot, migration mode is automatically
+stopped.
+
 Parameters: none
 Returns:    -ENOMEM if there is not enough free memory to start migration mode
 	    -EINVAL if the state of the VM is invalid (e.g. no memory defined)
diff --git linux-libre-5.4-gnu1/Documentation/virt/kvm/mmu.txt linux-libre-5.4.261-gnu1/Documentation/virt/kvm/mmu.txt
index dadb29e8738f..da1ac6a6398f 100644
--- linux-libre-5.4-gnu1/Documentation/virt/kvm/mmu.txt
+++ linux-libre-5.4.261-gnu1/Documentation/virt/kvm/mmu.txt
@@ -152,8 +152,8 @@ Shadow pages contain the following information:
     shadow pages) so role.quadrant takes values in the range 0..3.  Each
     quadrant maps 1GB virtual address space.
   role.access:
-    Inherited guest access permissions in the form uwx.  Note execute
-    permission is positive, not negative.
+    Inherited guest access permissions from the parent ptes in the form uwx.
+    Note execute permission is positive, not negative.
   role.invalid:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
@@ -420,7 +420,7 @@ If the generation number of the spte does not equal the global generation
 number, it will ignore the cached MMIO information and handle the page
 fault through the slow path.
 
-Since only 19 bits are used to store generation-number on mmio spte, all
+Since only 18 bits are used to store generation-number on mmio spte, all
 pages are zapped when there is an overflow.
 
 Unfortunately, a single memory access might access kvm_memslots(kvm) multiple
diff --git linux-libre-5.4-gnu1/Documentation/vm/memory-model.rst linux-libre-5.4.261-gnu1/Documentation/vm/memory-model.rst
index 58a12376b7df..94db75ba7fbe 100644
--- linux-libre-5.4-gnu1/Documentation/vm/memory-model.rst
+++ linux-libre-5.4.261-gnu1/Documentation/vm/memory-model.rst
@@ -52,8 +52,7 @@ wrapper :c:func:`free_area_init`. Yet, the mappings array is not
 usable until the call to :c:func:`memblock_free_all` that hands all
 the memory to the page allocator.
 
-If an architecture enables `CONFIG_ARCH_HAS_HOLES_MEMORYMODEL` option,
-it may free parts of the `mem_map` array that do not cover the
+An architecture may free parts of the `mem_map` array that do not cover the
 actual physical pages. In such case, the architecture specific
 :c:func:`pfn_valid` implementation should take the holes in the
 `mem_map` into account.
diff --git linux-libre-5.4-gnu1/Documentation/vm/slub.rst linux-libre-5.4.261-gnu1/Documentation/vm/slub.rst
index 933ada4368ff..309c1acb414b 100644
--- linux-libre-5.4-gnu1/Documentation/vm/slub.rst
+++ linux-libre-5.4.261-gnu1/Documentation/vm/slub.rst
@@ -160,7 +160,7 @@ SLUB Debug output
 Here is a sample of slub debug output::
 
  ====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
  --------------------------------------------------------------------
 
  INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -168,10 +168,10 @@ Here is a sample of slub debug output::
  INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
  INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
 
- Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
-   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
-  Redzone 0xc90f6d28:  00 cc cc cc                                     .
-  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object   (0xc90f6d20): 31 30 31 39 2e 30 30 35                         1019.005
+ Redzone  (0xc90f6d28): 00 cc cc cc                                     .
+ Padding  (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
 
    [<c010523d>] dump_trace+0x63/0x1eb
    [<c01053df>] show_trace_log_lvl+0x1a/0x2f
diff --git linux-libre-5.4-gnu1/Documentation/x86/topology.rst linux-libre-5.4.261-gnu1/Documentation/x86/topology.rst
index e29739904e37..7f58010ea86a 100644
--- linux-libre-5.4-gnu1/Documentation/x86/topology.rst
+++ linux-libre-5.4.261-gnu1/Documentation/x86/topology.rst
@@ -41,6 +41,8 @@ Package
 Packages contain a number of cores plus shared resources, e.g. DRAM
 controller, shared caches etc.
 
+Modern systems may also use the term 'Die' for package.
+
 AMD nomenclature for package is 'Node'.
 
 Package-related topology information in the kernel:
@@ -53,11 +55,18 @@ Package-related topology information in the kernel:
 
     The number of dies in a package. This information is retrieved via CPUID.
 
+  - cpuinfo_x86.cpu_die_id:
+
+    The physical ID of the die. This information is retrieved via CPUID.
+
   - cpuinfo_x86.phys_proc_id:
 
     The physical ID of the package. This information is retrieved via CPUID
     and deduced from the APIC IDs of the cores in the package.
 
+    Modern systems use this value for the socket. There may be multiple
+    packages within a socket. This value may differ from cpu_die_id.
+
   - cpuinfo_x86.logical_proc_id:
 
     The logical ID of the package. As we do not trust BIOSes to enumerate the
diff --git linux-libre-5.4-gnu1/Documentation/xtensa/mmu.rst linux-libre-5.4.261-gnu1/Documentation/xtensa/mmu.rst
index e52a12960fdc..450573afa31a 100644
--- linux-libre-5.4-gnu1/Documentation/xtensa/mmu.rst
+++ linux-libre-5.4.261-gnu1/Documentation/xtensa/mmu.rst
@@ -82,7 +82,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xc8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -124,7 +125,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xa8000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
@@ -167,7 +169,8 @@ Default MMUv2-compatible layout::
   +------------------+
   | VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
   +------------------+  VMALLOC_END
-  | Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_1           0x98000000  DCACHE_WAY_SIZE
   | remap area 1     |
   +------------------+
   | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
diff --git linux-libre-5.4-gnu1/MAINTAINERS linux-libre-5.4.261-gnu1/MAINTAINERS
index 9d3a5c54a41d..2040c2f76dcf 100644
--- linux-libre-5.4-gnu1/MAINTAINERS
+++ linux-libre-5.4.261-gnu1/MAINTAINERS
@@ -1101,7 +1101,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	drivers/iio/adc/stx104.c
+F:	drivers/iio/addac/stx104.c
 
 APM DRIVER
 M:	Jiri Kosina <jikos@kernel.org>
@@ -4028,6 +4028,7 @@ B:	https://github.com/ClangBuiltLinux/linux/issues
 C:	irc://chat.freenode.net/clangbuiltlinux
 S:	Supported
 K:	\b(?i:clang|llvm)\b
+F:	Documentation/kbuild/llvm.rst
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
@@ -4616,13 +4617,6 @@ F:	include/uapi/linux/dccp.h
 F:	include/linux/tfrc.h
 F:	net/dccp/
 
-DECnet NETWORK LAYER
-W:	http://linux-decnet.sourceforge.net
-L:	linux-decnet-user@lists.sourceforge.net
-S:	Orphan
-F:	Documentation/networking/decnet.txt
-F:	net/decnet/
-
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 L:	linux-mips@vger.kernel.org
@@ -6973,6 +6967,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO IR Transmitter
 M:	Sean Young <sean@mess.org>
@@ -8200,7 +8195,7 @@ M:	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
 M:	Rodrigo Vivi <rodrigo.vivi@intel.com>
 L:	intel-gfx@lists.freedesktop.org
 W:	https://01.org/linuxgraphics/
-B:	https://01.org/linuxgraphics/documentation/how-report-bugs
+B:	https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs
 C:	irc://chat.freenode.net/intel-gfx
 Q:	http://patchwork.freedesktop.org/project/intel-gfx/
 T:	git git://anongit.freedesktop.org/drm-intel
@@ -8703,8 +8698,10 @@ L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://www.isdn4linux.de
 S:	Maintained
-F:	drivers/isdn/mISDN
-F:	drivers/isdn/hardware
+F:	drivers/isdn/mISDN/
+F:	drivers/isdn/hardware/
+F:	drivers/isdn/Kconfig
+F:	drivers/isdn/Makefile
 
 ISDN/CAPI SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
@@ -13636,6 +13633,7 @@ F:	arch/mips/configs/generic/board-ranchu.config
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
 S:	Maintained
 F:	drivers/char/random.c
 
@@ -14656,6 +14654,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/phy/phylink.c
 F:	drivers/net/phy/sfp*
+F:	include/linux/mdio/mdio-i2c.h
 F:	include/linux/phylink.h
 F:	include/linux/sfp.h
 K:	phylink
@@ -17859,7 +17858,8 @@ S:	Supported
 F:	sound/xen/*
 
 XFS FILESYSTEM
-M:	Darrick J. Wong <darrick.wong@oracle.com>
+M:	Chandan Babu R <chandan.babu@oracle.com>
+M:	Darrick J. Wong <djwong@kernel.org>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
 W:	http://xfs.org/
diff --git linux-libre-5.4-gnu1/Makefile linux-libre-5.4.261-gnu1/Makefile
index 56080456f350..f23d0ca86aeb 100644
--- linux-libre-5.4-gnu1/Makefile
+++ linux-libre-5.4.261-gnu1/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 0
+SUBLEVEL = 261
 EXTRAVERSION = -gnu1
 NAME = Kleptomaniac Octopus
 
@@ -89,9 +89,16 @@ endif
 
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
+# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
 
-ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
-  quiet=silent_
+ifeq ($(filter 3.%,$(MAKE_VERSION)),)
+silence:=$(findstring s,$(firstword -$(MAKEFLAGS)))
+else
+silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS)))
+endif
+
+ifeq ($(silence),s)
+quiet=silent_
 endif
 
 export quiet Q KBUILD_VERBOSE
@@ -394,8 +401,13 @@ HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
 HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
 HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
 
-HOSTCC       = gcc
-HOSTCXX      = g++
+ifneq ($(LLVM),)
+HOSTCC	= clang
+HOSTCXX	= clang++
+else
+HOSTCC	= gcc
+HOSTCXX	= g++
+endif
 KBUILD_HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
 		-fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \
 		$(HOSTCFLAGS)
@@ -404,28 +416,45 @@ KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 
 # Make variables (CC, etc...)
-AS		= $(CROSS_COMPILE)as
-LD		= $(CROSS_COMPILE)ld
-CC		= $(CROSS_COMPILE)gcc
 CPP		= $(CC) -E
+ifneq ($(LLVM),)
+CC		= clang
+LD		= ld.lld
+AR		= llvm-ar
+NM		= llvm-nm
+OBJCOPY		= llvm-objcopy
+OBJDUMP		= llvm-objdump
+READELF		= llvm-readelf
+OBJSIZE		= llvm-size
+STRIP		= llvm-strip
+else
+CC		= $(CROSS_COMPILE)gcc
+LD		= $(CROSS_COMPILE)ld
 AR		= $(CROSS_COMPILE)ar
 NM		= $(CROSS_COMPILE)nm
-STRIP		= $(CROSS_COMPILE)strip
 OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
+READELF		= $(CROSS_COMPILE)readelf
 OBJSIZE		= $(CROSS_COMPILE)size
+STRIP		= $(CROSS_COMPILE)strip
+endif
 PAHOLE		= pahole
 LEX		= flex
 YACC		= bison
 AWK		= awk
 INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
+DEPMOD		= depmod
 PERL		= perl
 PYTHON		= python
-PYTHON2		= python2
 PYTHON3		= python3
 CHECK		= sparse
 BASH		= bash
+KGZIP		= gzip
+KBZIP2		= bzip2
+KLZOP		= lzop
+LZMA		= lzma
+LZ4		= lz4c
+XZ		= xz
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
@@ -458,7 +487,7 @@ KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
 KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
 		   -Werror=implicit-function-declaration -Werror=implicit-int \
-		   -Wno-format-security \
+		   -Werror=return-type -Wno-format-security \
 		   -std=gnu89
 KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_AFLAGS_KERNEL :=
@@ -471,9 +500,10 @@ KBUILD_LDFLAGS :=
 GCC_PLUGINS_CFLAGS :=
 CLANG_FLAGS :=
 
-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE PAHOLE LEX YACC AWK INSTALLKERNEL
-export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
+export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
+export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
+export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
@@ -528,13 +558,13 @@ ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
 ifneq ($(CROSS_COMPILE),)
 CLANG_FLAGS	+= --target=$(notdir $(CROSS_COMPILE:%-=%))
 GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
-CLANG_FLAGS	+= --prefix=$(GCC_TOOLCHAIN_DIR)
+CLANG_FLAGS	+= --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
 GCC_TOOLCHAIN	:= $(realpath $(GCC_TOOLCHAIN_DIR)/..)
 endif
 ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
-ifeq ($(shell $(AS) --version 2>&1 | head -n 1 | grep clang),)
+ifneq ($(LLVM_IAS),1)
 CLANG_FLAGS	+= -no-integrated-as
 endif
 CLANG_FLAGS	+= -Werror=unknown-warning-option
@@ -587,12 +617,8 @@ KBUILD_MODULES :=
 KBUILD_BUILTIN := 1
 
 # If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
-
 ifeq ($(MAKECMDGOALS),modules)
-  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+  KBUILD_BUILTIN :=
 endif
 
 # If we have "make <whatever> modules", compile modules
@@ -618,7 +644,6 @@ ifeq ($(KBUILD_EXTMOD),)
 init-y		:= init/
 drivers-y	:= drivers/ sound/
 drivers-$(CONFIG_SAMPLES) += samples/
-drivers-$(CONFIG_KERNEL_HEADER_TEST) += include/
 net-y		:= net/
 libs-y		:= lib/
 core-y		:= usr/
@@ -708,12 +733,9 @@ else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 KBUILD_CFLAGS += -Os
 endif
 
-ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
-KBUILD_CFLAGS   += -Wno-maybe-uninitialized
-endif
-
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-allow-store-data-races)
 
 include scripts/Makefile.kcov
 include scripts/Makefile.gcc-plugins
@@ -750,17 +772,21 @@ KBUILD_CFLAGS += -Wno-tautological-compare
 KBUILD_CFLAGS += -mno-global-merge
 else
 
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += -Wno-unused-but-set-variable
-
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 endif
 
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
+
+# These result in bogus false positives
+KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer)
+
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
@@ -787,8 +813,13 @@ DEBUG_CFLAGS	+= -gsplit-dwarf
 else
 DEBUG_CFLAGS	+= -g
 endif
+ifeq ($(LLVM_IAS),1)
+KBUILD_AFLAGS	+= -g
+else
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2
 endif
+endif
+
 ifdef CONFIG_DEBUG_INFO_DWARF4
 DEBUG_CFLAGS	+= -gdwarf-4
 endif
@@ -861,6 +892,17 @@ KBUILD_CFLAGS += -Wno-pointer-sign
 # disable stringop warnings in gcc 8+
 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
 
+# We'll want to enable this eventually, but it's not going away for 5.7 at least
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+
+# Another good warning that we'll want to enable eventually
+KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
+
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
@@ -891,12 +933,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=designated-init)
 # change __FILE__ to the relative path from the srctree
 KBUILD_CFLAGS	+= $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
-# ensure -fcf-protection is disabled when using retpoline as it is
-# incompatible with -mindirect-branch=thunk-extern
-ifdef CONFIG_RETPOLINE
-KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
-endif
-
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan
@@ -909,12 +945,15 @@ KBUILD_CFLAGS   += $(KCFLAGS)
 KBUILD_LDFLAGS_MODULE += --build-id
 LDFLAGS_vmlinux += --build-id
 
+KBUILD_LDFLAGS	+= -z noexecstack
+KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
 
 ifeq ($(CONFIG_RELR),y)
-LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr
+LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr --use-android-relr-tags
 endif
 
 # make the checker run with the right architecture
@@ -978,10 +1017,10 @@ export mod_strip_cmd
 mod_compress_cmd = true
 ifdef CONFIG_MODULE_COMPRESS
   ifdef CONFIG_MODULE_COMPRESS_GZIP
-    mod_compress_cmd = gzip -n -f
+    mod_compress_cmd = $(KGZIP) -n -f
   endif # CONFIG_MODULE_COMPRESS_GZIP
   ifdef CONFIG_MODULE_COMPRESS_XZ
-    mod_compress_cmd = xz -f
+    mod_compress_cmd = $(XZ) -f
   endif # CONFIG_MODULE_COMPRESS_XZ
 endif # CONFIG_MODULE_COMPRESS
 export mod_compress_cmd
@@ -999,7 +1038,7 @@ HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
 
 ifdef CONFIG_STACK_VALIDATION
   has_libelf := $(call try-run,\
-		echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
+		echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else
@@ -1050,7 +1089,7 @@ PHONY += autoksyms_recursive
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 autoksyms_recursive: descend modules.order
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
+	  "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
 endif
 
 # For the kernel to actually contain only the needed exported symbols,
@@ -1152,11 +1191,19 @@ define filechk_utsrelease.h
 endef
 
 define filechk_version.h
-	echo \#define LINUX_VERSION_CODE $(shell                         \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
-	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
+	if [ $(SUBLEVEL) -gt 255 ]; then                                 \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \
+	else                                                             \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+	fi;                                                              \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) +  \
+	((c) > 255 ? 255 : (c)))'
 endef
 
+$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0)
+$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0)
 $(version_h): FORCE
 	$(call filechk,version.h)
 	$(Q)rm -f $(old_version_h)
@@ -1196,19 +1243,15 @@ headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
 	$(Q)$(MAKE) $(hdr-inst)=include/uapi
 	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
 
+# Deprecated. It is no-op now.
 PHONY += headers_check
-headers_check: headers
-	$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
-	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi HDRCHECK=1
+headers_check:
+	@:
 
 ifdef CONFIG_HEADERS_INSTALL
 prepare: headers
 endif
 
-ifdef CONFIG_HEADERS_CHECK
-all: headers_check
-endif
-
 PHONY += scripts_unifdef
 scripts_unifdef: scripts_basic
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
@@ -1242,12 +1285,16 @@ ifneq ($(dtstree),)
 %.dtb: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
-PHONY += dtbs dtbs_install dt_binding_check
-dtbs dtbs_check: include/config/kernel.release scripts_dtc
+PHONY += dtbs dtbs_install dtbs_check
+dtbs: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)
 
+ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
+dtbs: dt_binding_check
+endif
+
 dtbs_check: export CHECK_DTBS=1
-dtbs_check: dt_binding_check
+dtbs_check: dtbs
 
 dtbs_install:
 	$(Q)$(MAKE) $(dtbinst)=$(dtstree)
@@ -1262,6 +1309,7 @@ PHONY += scripts_dtc
 scripts_dtc: scripts_basic
 	$(Q)$(MAKE) $(build)=scripts/dtc
 
+PHONY += dt_binding_check
 dt_binding_check: scripts_dtc
 	$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
 
@@ -1274,6 +1322,13 @@ ifdef CONFIG_MODULES
 
 all: modules
 
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
+ifdef CONFIG_MODVERSIONS
+  KBUILD_BUILTIN := 1
+endif
+
 # Build modules
 #
 # A module can be listed more than once in obj-m resulting in
@@ -1476,7 +1531,6 @@ help:
 	@echo  '  versioncheck    - Sanity check on version.h usage'
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
-	@echo  '  headers_check   - Sanity check on exported headers'
 	@echo  '  headerdep       - Detect inclusion cycles in headers'
 	@echo  '  coccicheck      - Check with Coccinelle'
 	@echo  ''
@@ -1641,6 +1695,50 @@ help:
 PHONY += prepare
 endif # KBUILD_EXTMOD
 
+# Single targets
+# ---------------------------------------------------------------------------
+# To build individual files in subdirectories, you can do like this:
+#
+#   make foo/bar/baz.s
+#
+# The supported suffixes for single-target are listed in 'single-targets'
+#
+# To build only under specific subdirectories, you can do like this:
+#
+#   make foo/bar/baz/
+
+ifdef single-build
+
+# .ko is special because modpost is needed
+single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
+single-no-ko := $(sort $(patsubst %.ko,%.mod, $(MAKECMDGOALS)))
+
+$(single-ko): single_modpost
+	@:
+$(single-no-ko): descend
+	@:
+
+ifeq ($(KBUILD_EXTMOD),)
+# For the single build of in-tree modules, use a temporary file to avoid
+# the situation of modules_install installing an invalid modules.order.
+MODORDER := .modules.tmp
+endif
+
+PHONY += single_modpost
+single_modpost: $(single-no-ko)
+	$(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+KBUILD_MODULES := 1
+
+export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
+
+# trim unrelated directories
+build-dirs := $(foreach d, $(build-dirs), \
+			$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
+
+endif
+
 # Handle descending into subdirectories listed in $(build-dirs)
 # Preset locale variables to speed up the build process. Limit locale
 # tweaks to this spot to avoid wrong language settings when running
@@ -1649,7 +1747,9 @@ endif # KBUILD_EXTMOD
 PHONY += descend $(build-dirs)
 descend: $(build-dirs)
 $(build-dirs): prepare
-	$(Q)$(MAKE) $(build)=$@ single-build=$(single-build) need-builtin=1 need-modorder=1
+	$(Q)$(MAKE) $(build)=$@ \
+	single-build=$(if $(filter-out $@/, $(single-no-ko)),1) \
+	need-builtin=1 need-modorder=1
 
 clean-dirs := $(addprefix _clean_, $(clean-dirs))
 PHONY += $(clean-dirs) clean
@@ -1753,50 +1853,6 @@ tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
 	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
-# Single targets
-# ---------------------------------------------------------------------------
-# To build individual files in subdirectories, you can do like this:
-#
-#   make foo/bar/baz.s
-#
-# The supported suffixes for single-target are listed in 'single-targets'
-#
-# To build only under specific subdirectories, you can do like this:
-#
-#   make foo/bar/baz/
-
-ifdef single-build
-
-single-all := $(filter $(single-targets), $(MAKECMDGOALS))
-
-# .ko is special because modpost is needed
-single-ko := $(sort $(filter %.ko, $(single-all)))
-single-no-ko := $(sort $(patsubst %.ko,%.mod, $(single-all)))
-
-$(single-ko): single_modpost
-	@:
-$(single-no-ko): descend
-	@:
-
-ifeq ($(KBUILD_EXTMOD),)
-# For the single build of in-tree modules, use a temporary file to avoid
-# the situation of modules_install installing an invalid modules.order.
-MODORDER := .modules.tmp
-endif
-
-PHONY += single_modpost
-single_modpost: $(single-no-ko)
-	$(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-KBUILD_MODULES := 1
-
-export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
-
-single-build = $(if $(filter-out $@/, $(single-no-ko)),1)
-
-endif
-
 # FIXME Should go into a make.lib or something
 # ===========================================================================
 
diff --git linux-libre-5.4-gnu1/arch/Kconfig linux-libre-5.4.261-gnu1/arch/Kconfig
index 5f8a5d84dbbe..4d03616bf597 100644
--- linux-libre-5.4-gnu1/arch/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/Kconfig
@@ -131,6 +131,22 @@ config UPROBES
 	    managed by the kernel and kept transparent to the probed
 	    application. )
 
+config HAVE_64BIT_ALIGNED_ACCESS
+	def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Some architectures require 64 bit accesses to be 64 bit
+	  aligned, which also requires structs containing 64 bit values
+	  to be 64 bit aligned too. This includes some 32 bit
+	  architectures which can do 64 bit accesses, as well as 64 bit
+	  architectures without unaligned access.
+
+	  This symbol should be selected by an architecture if 64 bit
+	  accesses are required to be 64 bit aligned in this way even
+	  though it is not a 64 bit architecture.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -255,6 +271,9 @@ config ARCH_HAS_UNCACHED_SEGMENT
 	select ARCH_HAS_DMA_PREP_COHERENT
 	bool
 
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
+
 # Select if arch init_task must go in the __init_task_data section
 config ARCH_TASK_STRUCT_ON_STACK
        bool
@@ -396,15 +415,22 @@ config HAVE_ARCH_JUMP_LABEL_RELATIVE
 config HAVE_RCU_TABLE_FREE
 	bool
 
-config HAVE_RCU_TABLE_NO_INVALIDATE
+config HAVE_MMU_GATHER_PAGE_SIZE
 	bool
 
-config HAVE_MMU_GATHER_PAGE_SIZE
+config MMU_GATHER_NO_RANGE
 	bool
 
 config HAVE_MMU_GATHER_NO_GATHER
 	bool
 
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
@@ -892,27 +918,6 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
-config ARCH_HAS_REFCOUNT
-	bool
-	help
-	  An architecture selects this when it has implemented refcount_t
-	  using open coded assembly primitives that provide an optimized
-	  refcount_t implementation, possibly at the expense of some full
-	  refcount state checks of CONFIG_REFCOUNT_FULL=y.
-
-	  The refcount overflow check behavior, however, must be retained.
-	  Catching overflows is the primary security concern for protecting
-	  against bugs in reference counts.
-
-config REFCOUNT_FULL
-	bool "Perform full reference count validation at the expense of speed"
-	help
-	  Enabling this switches the refcounting infrastructure from a fast
-	  unchecked atomic_t implementation to a fully state checked
-	  implementation, which can be (slightly) slower but provides protections
-	  against various use-after-free conditions that can be used in
-	  security flaw exploits.
-
 config HAVE_ARCH_COMPILER_H
 	bool
 	help
diff --git linux-libre-5.4-gnu1/arch/alpha/configs/defconfig linux-libre-5.4.261-gnu1/arch/alpha/configs/defconfig
index f4ec420d7f2d..3a132c91d45b 100644
--- linux-libre-5.4-gnu1/arch/alpha/configs/defconfig
+++ linux-libre-5.4.261-gnu1/arch/alpha/configs/defconfig
@@ -36,7 +36,6 @@ CONFIG_BLK_DEV_CY82C693=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
diff --git linux-libre-5.4-gnu1/arch/alpha/include/asm/bugs.h linux-libre-5.4.261-gnu1/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- linux-libre-5.4-gnu1/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git linux-libre-5.4-gnu1/arch/alpha/include/asm/io.h linux-libre-5.4.261-gnu1/arch/alpha/include/asm/io.h
index af2c0063dc75..66a384a4ddba 100644
--- linux-libre-5.4-gnu1/arch/alpha/include/asm/io.h
+++ linux-libre-5.4.261-gnu1/arch/alpha/include/asm/io.h
@@ -61,7 +61,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -71,7 +71,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -107,7 +107,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
@@ -322,14 +322,18 @@ static inline int __is_mmio(const volatile void __iomem *addr)
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
 extern inline unsigned int ioread8(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
 extern inline unsigned int ioread16(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
@@ -370,7 +374,9 @@ extern inline void outw(u16 b, unsigned long port)
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
 extern inline unsigned int ioread32(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
 	mb();
 	return ret;
 }
@@ -415,14 +421,18 @@ extern inline void __raw_writew(u16 b, volatile void __iomem *addr)
 
 extern inline u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 extern inline u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
@@ -463,14 +473,18 @@ extern inline void __raw_writeq(u64 b, volatile void __iomem *addr)
 
 extern inline u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 extern inline u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -488,10 +502,10 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 }
 #endif
 
-#define ioread16be(p) be16_to_cpu(ioread16(p))
-#define ioread32be(p) be32_to_cpu(ioread32(p))
-#define iowrite16be(v,p) iowrite16(cpu_to_be16(v), (p))
-#define iowrite32be(v,p) iowrite32(cpu_to_be32(v), (p))
+#define ioread16be(p) swab16(ioread16(p))
+#define ioread32be(p) swab32(ioread32(p))
+#define iowrite16be(v,p) iowrite16(swab16(v), (p))
+#define iowrite32be(v,p) iowrite32(swab32(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
@@ -499,14 +513,44 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 #define outb_p		outb
 #define outw_p		outw
 #define outl_p		outl
-#define readb_relaxed(addr)	__raw_readb(addr)
-#define readw_relaxed(addr)	__raw_readw(addr)
-#define readl_relaxed(addr)	__raw_readl(addr)
-#define readq_relaxed(addr)	__raw_readq(addr)
-#define writeb_relaxed(b, addr)	__raw_writeb(b, addr)
-#define writew_relaxed(b, addr)	__raw_writew(b, addr)
-#define writel_relaxed(b, addr)	__raw_writel(b, addr)
-#define writeq_relaxed(b, addr)	__raw_writeq(b, addr)
+
+extern u8 readb_relaxed(const volatile void __iomem *addr);
+extern u16 readw_relaxed(const volatile void __iomem *addr);
+extern u32 readl_relaxed(const volatile void __iomem *addr);
+extern u64 readq_relaxed(const volatile void __iomem *addr);
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+extern inline u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+extern inline u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+extern inline u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+extern inline u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+#endif
+
+#define writeb_relaxed	writeb
+#define writew_relaxed	writew
+#define writel_relaxed	writel
+#define writeq_relaxed	writeq
 
 /*
  * String version of IO memory access ops:
diff --git linux-libre-5.4-gnu1/arch/alpha/include/asm/timex.h linux-libre-5.4.261-gnu1/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- linux-libre-5.4-gnu1/arch/alpha/include/asm/timex.h
+++ linux-libre-5.4.261-gnu1/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/entry.S linux-libre-5.4.261-gnu1/arch/alpha/kernel/entry.S
index 2e09248f8324..c27d01232799 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/entry.S
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/entry.S
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/io.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/io.c
index c025a3e5e357..938de13adfbf 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/io.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/io.c
@@ -16,21 +16,27 @@
 unsigned int
 ioread8(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
 unsigned int ioread16(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
 
 unsigned int ioread32(void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
 	mb();
 	return ret;
 }
@@ -148,28 +154,36 @@ EXPORT_SYMBOL(__raw_writeq);
 
 u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
 
 u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -207,6 +221,38 @@ EXPORT_SYMBOL(writew);
 EXPORT_SYMBOL(writel);
 EXPORT_SYMBOL(writeq);
 
+/*
+ * The _relaxed functions must be ordered w.r.t. each other, but they don't
+ * have to be ordered w.r.t. other memory accesses.
+ */
+u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+
+u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+
+EXPORT_SYMBOL(readb_relaxed);
+EXPORT_SYMBOL(readw_relaxed);
+EXPORT_SYMBOL(readl_relaxed);
+EXPORT_SYMBOL(readq_relaxed);
 
 /*
  * Read COUNT 8-bit bytes from port PORT into memory starting at SRC.
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/module.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/module.c
index ac110ae8f978..b19a8aae74e1 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/module.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/setup.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/setup.c
index 5d4c76a77a9f..f1072b10913c 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/setup.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/setup.c
@@ -394,8 +394,7 @@ setup_memory(void *kernel_end)
 extern void setup_memory(void *);
 #endif /* !CONFIG_DISCONTIGMEM */
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/smp.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/smp.c
index 5f90df30be20..06fd42417aa9 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/smp.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/smp.c
@@ -585,7 +585,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/srmcons.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/srmcons.c
index 438b10c44d73..2b7a314b8452 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/srmcons.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/srmcons.c
@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
diff --git linux-libre-5.4-gnu1/arch/alpha/kernel/traps.c linux-libre-5.4.261-gnu1/arch/alpha/kernel/traps.c
index f6b9664ac504..1a0a98cfdae7 100644
--- linux-libre-5.4-gnu1/arch/alpha/kernel/traps.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/kernel/traps.c
@@ -192,7 +192,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -235,7 +235,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -368,20 +382,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
@@ -577,7 +577,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -632,7 +632,7 @@ got_exception:
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
diff --git linux-libre-5.4-gnu1/arch/alpha/mm/fault.c linux-libre-5.4.261-gnu1/arch/alpha/mm/fault.c
index 741e61ef9d3f..a86286d2d3f3 100644
--- linux-libre-5.4-gnu1/arch/alpha/mm/fault.c
+++ linux-libre-5.4.261-gnu1/arch/alpha/mm/fault.c
@@ -206,7 +206,7 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
diff --git linux-libre-5.4-gnu1/arch/arc/Kconfig linux-libre-5.4.261-gnu1/arch/arc/Kconfig
index 8383155c8c82..a9d0b5310165 100644
--- linux-libre-5.4-gnu1/arch/arc/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arc/Kconfig
@@ -29,6 +29,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
diff --git linux-libre-5.4-gnu1/arch/arc/Makefile linux-libre-5.4.261-gnu1/arch/arc/Makefile
index f1c44cccf8d6..6f05e509889f 100644
--- linux-libre-5.4-gnu1/arch/arc/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arc/Makefile
@@ -90,16 +90,22 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguments.
-KBUILD_IMAGE	:= $(boot)/bootpImage
-
-all:	bootpImage
-bootpImage: vmlinux
-
-boot_targets += uImage uImage.bin uImage.gz
+boot_targets := uImage.bin uImage.gz uImage.lzma
 
+PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git linux-libre-5.4-gnu1/arch/arc/boot/Makefile linux-libre-5.4.261-gnu1/arch/arc/boot/Makefile
index 538b92f4dd25..3b1f8a69a89e 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-targets := vmlinux.bin vmlinux.bin.gz uImage
+targets := vmlinux.bin vmlinux.bin.gz
 
 # uImage build relies on mkimage being availble on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
@@ -13,11 +13,6 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
-suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
-targets += uImage
 targets += uImage.bin
 targets += uImage.gz
 targets += uImage.lzma
@@ -42,7 +37,3 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
 	$(call if_changed,uimage,lzma)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix-y)
-	@ln -sf $(notdir $<) $@
-	@echo '  Image $@ is ready'
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/axc001.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc001.dtsi
index 6ec1fcdfc0d7..92247288d056 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/axc001.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc001.dtsi
@@ -85,7 +85,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/axc003.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc003.dtsi
index ac8e1b463a70..cd1edcf4f95e 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/axc003.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc003.dtsi
@@ -129,7 +129,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/axc003_idu.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc003_idu.dtsi
index 9da21e7fd246..70779386ca79 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/axc003_idu.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axc003_idu.dtsi
@@ -135,7 +135,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/axs10x_mb.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axs10x_mb.dtsi
index 08bcfed6b80f..134cc223ea81 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/axs10x_mb.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -77,6 +77,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/hsdk.dts linux-libre-5.4.261-gnu1/arch/arc/boot/dts/hsdk.dts
index 9acbeba832c0..dcaa44e408ac 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/hsdk.dts
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/hsdk.dts
@@ -88,6 +88,8 @@
 
 	arcpct: pct {
 		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
 	};
 
 	/* TIMER0 with interrupt for clockevent */
@@ -208,7 +210,7 @@
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
@@ -226,7 +228,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 					reg = <0>;
 				};
 			};
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/vdk_axc003.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/vdk_axc003.dtsi
index f8be7ba8dad4..c21d0eb07bf6 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/vdk_axc003.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -46,7 +46,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git linux-libre-5.4-gnu1/arch/arc/boot/dts/vdk_axc003_idu.dtsi linux-libre-5.4.261-gnu1/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 0afa3e53a4e3..4d348853ac7c 100644
--- linux-libre-5.4-gnu1/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -54,7 +54,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/elf.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/elf.h
index c77a0e3671ac..0284ace0e1ab 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/elf.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/elf.h
@@ -19,7 +19,7 @@
 #define  R_ARC_32_PCREL		0x31
 
 /*to set parameters in the core dumps */
-#define ELF_ARCH		EM_ARCOMPACT
+#define ELF_ARCH		EM_ARC_INUSE
 #define ELF_CLASS		ELFCLASS32
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/io.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/io.h
index 72f7929736f8..94ef71b38b69 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/io.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
 #define ioremap_wc(phy, sz)		ioremap(phy, sz)
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/linkage.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/linkage.h
index d9ee43c6b7db..284fd513d7c6 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/linkage.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/linkage.h
@@ -8,6 +8,10 @@
 
 #include <asm/dwarf.h>
 
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
 #ifdef __ASSEMBLY__
 
 .macro ST2 e, o, off
@@ -28,8 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/page.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/page.h
index 0a32e8cfd074..956f78ecf193 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/page.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/page.h
@@ -7,9 +7,22 @@
 
 #include <uapi/asm/page.h>
 
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
 struct vm_area_struct;
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/pgtable.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/pgtable.h
index 7addd0301c51..a1987d07d08c 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/pgtable.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/pgtable.h
@@ -108,8 +108,8 @@
 #define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
 /* More Abbrevaited helpers */
 #define PAGE_U_NONE     __pgprot(___DEF)
 #define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
@@ -133,11 +133,7 @@
 #define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
 #define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
 
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git linux-libre-5.4-gnu1/arch/arc/include/asm/syscalls.h linux-libre-5.4.261-gnu1/arch/arc/include/asm/syscalls.h
index 7ddba13e9b59..c3f4714a4f5c 100644
--- linux-libre-5.4-gnu1/arch/arc/include/asm/syscalls.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/asm/syscalls.h
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
+int sys_clone3_wrapper(void *, size_t);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);
diff --git linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/page.h linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..2a4ad619abfb 100644
--- linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/page.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
 
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/sigcontext.h linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/sigcontext.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/unistd.h linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/unistd.h
index 5eafa1115162..fa2713ae6bea 100644
--- linux-libre-5.4-gnu1/arch/arc/include/uapi/asm/unistd.h
+++ linux-libre-5.4.261-gnu1/arch/arc/include/uapi/asm/unistd.h
@@ -21,6 +21,7 @@
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_TIME32_SYSCALLS
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/entry.S linux-libre-5.4.261-gnu1/arch/arc/kernel/entry.S
index 72be01270e24..beb39930eedb 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/entry.S
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/entry.S
@@ -35,6 +35,18 @@ ENTRY(sys_clone_wrapper)
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
 
+ENTRY(sys_clone3_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone3
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	btst r10, TIF_SYSCALL_TRACE
+	bnz  tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone3_wrapper)
+
 ENTRY(ret_from_fork)
 	; when the forked child comes here from the __switch_to function
 	; r0 has the last task pointer.
@@ -153,7 +165,6 @@ END(EV_Extension)
 tracesys:
 	; save EFA in case tracer wants the PC of traced task
 	; using ERET won't work since next-PC has already committed
-	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
@@ -166,7 +177,7 @@ tracesys:
 
 	; Do the Sys Call as we normally would.
 	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -188,6 +199,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
@@ -196,15 +208,9 @@ tracesys_exit:
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
-
-	; stop_pc info by gdb needs this info
-	lr  r0, [efa]
+	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
 	mov r1, sp
 
-	; Now that we have read EFA, it is safe to do "fake" rtie
-	;   and get out of CPU exception mode
-	FAKE_RET_FROM_EXCPN
-
 	; Save callee regs in case gdb wants to have a look
 	; SP will grow up by size of CALLEE Reg-File
 	; NOTE: clobbers r12
@@ -231,6 +237,10 @@ ENTRY(EV_Trap)
 
 	EXCEPTION_PROLOGUE
 
+	lr  r12, [efa]
+
+	FAKE_RET_FROM_EXCPN
+
 	;============ TRAP 1   :breakpoints
 	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
 	bmsk.f 0, r10, 7
@@ -238,9 +248,6 @@ ENTRY(EV_Trap)
 
 	;============ TRAP  (no param): syscall top level
 
-	; First return from Exception to pure K mode (Exception/IRQs renabled)
-	FAKE_RET_FROM_EXCPN
-
 	; If syscall tracing ongoing, invoke pre-post-hooks
 	GET_CURR_THR_INFO_FLAGS   r10
 	btst r10, TIF_SYSCALL_TRACE
@@ -249,7 +256,7 @@ ENTRY(EV_Trap)
 	;============ Normal syscall case
 
 	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/perf_event.c linux-libre-5.4.261-gnu1/arch/arc/kernel/perf_event.c
index 661fd842ea97..145722f80c9b 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/perf_event.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/perf_event.c
@@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, has_interrupts;
+	int i, has_interrupts, irq = -1;
 	int counter_size;	/* in bits */
 
 	union cc_name {
@@ -638,22 +638,25 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	};
 
 	if (has_interrupts) {
-		int irq = platform_get_irq(pdev, 0);
+		irq = platform_get_irq(pdev, 0);
+		if (irq >= 0) {
+			int ret;
 
-		if (irq < 0) {
-			pr_err("Cannot get IRQ number for the platform\n");
-			return -ENODEV;
-		}
+			arc_pmu->irq = irq;
 
-		arc_pmu->irq = irq;
+			/* intc map function ensures irq_set_percpu_devid() called */
+			ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+						 this_cpu_ptr(&arc_pmu_cpu));
 
-		/* intc map function ensures irq_set_percpu_devid() called */
-		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
-				   this_cpu_ptr(&arc_pmu_cpu));
+			if (!ret)
+				on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+			else
+				irq = -1;
+		}
 
-		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+	}
 
-	} else
+	if (irq == -1)
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 
 	/*
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/process.c linux-libre-5.4.261-gnu1/arch/arc/kernel/process.c
index e1889ce3faf9..bfd4cbe74aa3 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/process.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/process.c
@@ -171,9 +171,8 @@ asmlinkage void ret_from_fork(void);
  * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long kthread_arg,
-		struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
@@ -231,7 +230,7 @@ int copy_thread(unsigned long clone_flags,
 		 * set task's userland tls data ptr from 4th arg
 		 * clone C-lib call is difft from clone sys-call
 		 */
-		task_thread_info(p)->thr_ptr = regs->r3;
+		task_thread_info(p)->thr_ptr = tls;
 	} else {
 		/* Normal fork case: set parent's TLS ptr in child */
 		task_thread_info(p)->thr_ptr =
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/setup.c linux-libre-5.4.261-gnu1/arch/arc/kernel/setup.c
index 7ee89dc61f6e..23dc002aa574 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/setup.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/setup.c
@@ -12,6 +12,7 @@
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
@@ -409,12 +410,12 @@ static void arc_chk_core_config(void)
 	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
 
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/signal.c linux-libre-5.4.261-gnu1/arch/arc/kernel/signal.c
index 3d57ed0d8535..8877de0dfe6c 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/signal.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/signal.c
@@ -61,6 +61,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -94,9 +129,13 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -109,8 +148,12 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/stacktrace.c linux-libre-5.4.261-gnu1/arch/arc/kernel/stacktrace.c
index 1e440bbfa876..fc3054c34db1 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/stacktrace.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/stacktrace.c
@@ -38,15 +38,15 @@
 
 #ifdef CONFIG_ARC_DW2_UNWIND
 
-static void seed_unwind_frame_info(struct task_struct *tsk,
-				   struct pt_regs *regs,
-				   struct unwind_frame_info *frame_info)
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+		       struct unwind_frame_info *frame_info)
 {
 	/*
 	 * synchronous unwinding (e.g. dump_stack)
 	 *  - uses current values of SP and friends
 	 */
-	if (tsk == NULL && regs == NULL) {
+	if (regs == NULL && (tsk == NULL || tsk == current)) {
 		unsigned long fp, sp, blink, ret;
 		frame_info->task = current;
 
@@ -65,11 +65,15 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->call_frame = 0;
 	} else if (regs == NULL) {
 		/*
-		 * Asynchronous unwinding of sleeping task
-		 *  - Gets SP etc from task's pt_regs (saved bottom of kernel
-		 *    mode stack of task)
+		 * Asynchronous unwinding of a likely sleeping task
+		 *  - first ensure it is actually sleeping
+		 *  - if so, it will be in __switch_to, kernel mode SP of task
+		 *    is safe-kept and BLINK at a well known location in there
 		 */
 
+		if (tsk->state == TASK_RUNNING)
+			return -1;
+
 		frame_info->task = tsk;
 
 		frame_info->regs.r27 = TSK_K_FP(tsk);
@@ -103,6 +107,8 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->regs.r63 = regs->ret;
 		frame_info->call_frame = 0;
 	}
+
+	return 0;
 }
 
 #endif
@@ -112,11 +118,12 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 		int (*consumer_fn) (unsigned int, void *), void *arg)
 {
 #ifdef CONFIG_ARC_DW2_UNWIND
-	int ret = 0;
+	int ret = 0, cnt = 0;
 	unsigned int address;
 	struct unwind_frame_info frame_info;
 
-	seed_unwind_frame_info(tsk, regs, &frame_info);
+	if (seed_unwind_frame_info(tsk, regs, &frame_info))
+		return 0;
 
 	while (1) {
 		address = UNW_PC(&frame_info);
@@ -132,6 +139,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 			break;
 
 		frame_info.regs.r63 = frame_info.regs.r31;
+
+		if (cnt++ > 128) {
+			printk("unwinder looping too long, aborting !\n");
+			return 0;
+		}
 	}
 
 	return address;		/* return the last address it saw */
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/sys.c linux-libre-5.4.261-gnu1/arch/arc/kernel/sys.c
index fddecc76efb7..1069446bdc58 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/sys.c
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/sys.c
@@ -7,6 +7,7 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
+#define sys_clone3	sys_clone3_wrapper
 
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
diff --git linux-libre-5.4-gnu1/arch/arc/kernel/vmlinux.lds.S linux-libre-5.4.261-gnu1/arch/arc/kernel/vmlinux.lds.S
index 6c693a9d29b6..0391b8293ad8 100644
--- linux-libre-5.4-gnu1/arch/arc/kernel/vmlinux.lds.S
+++ linux-libre-5.4.261-gnu1/arch/arc/kernel/vmlinux.lds.S
@@ -88,6 +88,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
diff --git linux-libre-5.4-gnu1/arch/arc/mm/cache.c linux-libre-5.4.261-gnu1/arch/arc/mm/cache.c
index a2fbea3ee07c..102418ac5ff4 100644
--- linux-libre-5.4-gnu1/arch/arc/mm/cache.c
+++ linux-libre-5.4.261-gnu1/arch/arc/mm/cache.c
@@ -1123,7 +1123,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	clear_page(to);
 	clear_bit(PG_dc_clean, &page->flags);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git linux-libre-5.4-gnu1/arch/arc/mm/dma.c linux-libre-5.4.261-gnu1/arch/arc/mm/dma.c
index 73a7e88a1e92..e947572a521e 100644
--- linux-libre-5.4-gnu1/arch/arc/mm/dma.c
+++ linux-libre-5.4.261-gnu1/arch/arc/mm/dma.c
@@ -48,8 +48,8 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
  * upper layer functions (in include/linux/dma-mapping.h)
  */
 
-void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_TO_DEVICE:
@@ -69,8 +69,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
 	}
 }
 
-void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_TO_DEVICE:
diff --git linux-libre-5.4-gnu1/arch/arc/mm/ioremap.c linux-libre-5.4.261-gnu1/arch/arc/mm/ioremap.c
index fac4adc90204..d3b1ea16e9cd 100644
--- linux-libre-5.4-gnu1/arch/arc/mm/ioremap.c
+++ linux-libre-5.4.261-gnu1/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
+	unsigned int off;
 	unsigned long vaddr;
 	struct vm_struct *area;
-	phys_addr_t off, end;
+	phys_addr_t end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 
 	/* Mappings have to be page-aligned */
 	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
 	size = PAGE_ALIGN(end + 1) - paddr;
 
 	/*
@@ -92,7 +93,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
diff --git linux-libre-5.4-gnu1/arch/arc/mm/tlb.c linux-libre-5.4.261-gnu1/arch/arc/mm/tlb.c
index 10025e199353..2430d537f2d3 100644
--- linux-libre-5.4-gnu1/arch/arc/mm/tlb.c
+++ linux-libre-5.4.261-gnu1/arch/arc/mm/tlb.c
@@ -597,7 +597,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
diff --git linux-libre-5.4-gnu1/arch/arc/plat-eznps/Kconfig linux-libre-5.4.261-gnu1/arch/arc/plat-eznps/Kconfig
index a376a50d3fea..a645bca5899a 100644
--- linux-libre-5.4-gnu1/arch/arc/plat-eznps/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arc/plat-eznps/Kconfig
@@ -6,8 +6,9 @@
 
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
+	depends on ISA_ARCOMPACT
 	select CPU_BIG_ENDIAN
-	select CLKSRC_NPS
+	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
 	select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
 	help
diff --git linux-libre-5.4-gnu1/arch/arc/plat-eznps/include/plat/ctop.h linux-libre-5.4.261-gnu1/arch/arc/plat-eznps/include/plat/ctop.h
index a4a61531c7fb..77712c5ffe84 100644
--- linux-libre-5.4-gnu1/arch/arc/plat-eznps/include/plat/ctop.h
+++ linux-libre-5.4.261-gnu1/arch/arc/plat-eznps/include/plat/ctop.h
@@ -33,7 +33,6 @@
 #define CTOP_AUX_DPC				(CTOP_AUX_BASE + 0x02C)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 
diff --git linux-libre-5.4-gnu1/arch/arc/plat-hsdk/Kconfig linux-libre-5.4.261-gnu1/arch/arc/plat-hsdk/Kconfig
index ce8101834518..6b5c54576f54 100644
--- linux-libre-5.4-gnu1/arch/arc/plat-hsdk/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arc/plat-hsdk/Kconfig
@@ -8,5 +8,6 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK
 	select HAVE_PCI
diff --git linux-libre-5.4-gnu1/arch/arm/Kconfig linux-libre-5.4.261-gnu1/arch/arm/Kconfig
index 8a50efb559f3..2feb5dade121 100644
--- linux-libre-5.4-gnu1/arch/arm/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CLOCKSOURCE_DATA
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB
@@ -26,7 +27,7 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAS_GCOV_PROFILE_ALL
-	select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC
+	select ARCH_KEEP_MEMBLOCK
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
@@ -73,8 +74,9 @@ config ARM
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
 	select HAVE_CONTEXT_TRACKING
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
@@ -84,6 +86,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && (CC_IS_GCC || CLANG_VERSION >= 100000)
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IDE if PCI || ISA || PCMCIA
@@ -117,7 +120,6 @@ config ARM
 	select OLD_SIGSUSPEND3
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
-	select REFCOUNT_FULL
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	# Above selects are sorted alphabetically; please add new ones
@@ -506,8 +508,10 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_IO_H
+	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
 	select USE_OF
+	select WATCHDOG
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
@@ -517,7 +521,6 @@ config ARCH_S3C24XX
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
@@ -1514,9 +1517,6 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
@@ -1524,7 +1524,7 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+	def_bool y
 
 config HIGHMEM
 	bool "High Memory Support"
@@ -1838,7 +1838,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1906,7 +1905,7 @@ config XIP_DEFLATED_DATA
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	depends on !CPU_V7M
+	depends on MMU
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
diff --git linux-libre-5.4-gnu1/arch/arm/Makefile linux-libre-5.4.261-gnu1/arch/arm/Makefile
index db857d07114f..4f098edfbf20 100644
--- linux-libre-5.4-gnu1/arch/arm/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/Makefile
@@ -66,15 +66,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -88,7 +88,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -96,11 +96,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
@@ -307,13 +307,15 @@ endif
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
 stack_protector_prepare: prepare0
-	$(eval KBUILD_CFLAGS += \
+	$(eval SSP_PLUGIN_CFLAGS := \
 		-fplugin-arg-arm_ssp_per_task_plugin-tso=$(shell	\
 			awk '{if ($$2 == "THREAD_SZ_ORDER") print $$3;}'\
 				include/generated/asm-offsets.h)	\
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
 			awk '{if ($$2 == "TI_STACK_CANARY") print $$3;}'\
 				include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
 
 all:	$(notdir $(KBUILD_IMAGE))
diff --git linux-libre-5.4-gnu1/arch/arm/boot/bootp/init.S linux-libre-5.4.261-gnu1/arch/arm/boot/bootp/init.S
index 5c476bd2b4ce..b562da2f7040 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/bootp/init.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/bootp/init.S
@@ -13,7 +13,7 @@
  *  size immediately following the kernel, we could build this into
  *  a binary blob, and concatenate the zImage using the cat command.
  */
-		.section .start,#alloc,#execinstr
+		.section .start, "ax"
 		.type	_start, #function
 		.globl	_start
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/Makefile linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/Makefile
index 9219389bbe61..fb6cb24bde5c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/Makefile
@@ -90,6 +90,8 @@ $(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
 	$(addprefix $(obj)/,$(libfdt_hdrs))
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 
@@ -101,7 +103,6 @@ clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
 		$(libfdt) $(libfdt_hdrs) hyp-stub.S
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-KBUILD_CFLAGS += $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -117,13 +118,14 @@ CFLAGS_fdt_ro.o := $(nossp_flags)
 CFLAGS_fdt_rw.o := $(nossp_flags)
 CFLAGS_fdt_wip.o := $(nossp_flags)
 
-ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -165,7 +167,7 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
 # The .data section is already discarded by the linker script so no need
 # to bother about it here.
 check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
 [ -z "$$bad_syms" ] || \
   ( echo "following symbols must have non local/private scope:" >&2; \
     echo "$$bad_syms" >&2; false )
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/big-endian.S linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/big-endian.S
index 88e2a88d324b..0e092c36da2f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/big-endian.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/big-endian.S
@@ -6,7 +6,7 @@
  *  Author: Nicolas Pitre
  */
 
-	.section ".start", #alloc, #execinstr
+	.section ".start", "ax"
 
 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/decompress.c linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..74255e819831 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/decompress.c
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/decompress.c
@@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/efi-header.S linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/efi-header.S
index a5983588f96b..dd53d6eb53ad 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/head.S linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/head.S
index 93dffed0ac6e..17f87f4c74f5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/head.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/head.S
@@ -140,7 +140,7 @@
 #endif
 		.endm
 
-		.section ".start", #alloc, #execinstr
+		.section ".start", "ax"
 /*
  * sort out different calling conventions
  */
@@ -165,7 +165,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
@@ -1142,9 +1143,9 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
@@ -1273,7 +1274,7 @@ iflush:
 __armv5tej_mmu_cache_flush:
 		tst	r4, #1
 		movne	pc, lr
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
+1:		mrc	p15, 0, APSR_nzcv, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/libfdt_env.h linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/libfdt_env.h
index b36c0289a308..6a0f1f524466 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/libfdt_env.h
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/libfdt_env.h
@@ -2,11 +2,13 @@
 #ifndef _ARM_LIBFDT_ENV_H
 #define _ARM_LIBFDT_ENV_H
 
+#include <linux/limits.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
-#define INT_MAX			((int)(~0U>>1))
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
 
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/piggy.S linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/piggy.S
index 0284f84dcf38..27577644ee72 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/piggy.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/piggy.S
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-	.section .piggydata,#alloc
+	.section .piggydata, "a"
 	.globl	input_data
 input_data:
 	.incbin	"arch/arm/boot/compressed/piggy_data"
diff --git linux-libre-5.4-gnu1/arch/arm/boot/compressed/vmlinux.lds.S linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/vmlinux.lds.S
index fc7ed03d8b93..51b078604978 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/compressed/vmlinux.lds.S
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/compressed/vmlinux.lds.S
@@ -43,7 +43,7 @@ SECTIONS
   }
   .table : ALIGN(4) {
     _table_start = .;
-    LONG(ZIMAGE_MAGIC(2))
+    LONG(ZIMAGE_MAGIC(4))
     LONG(ZIMAGE_MAGIC(0x5a534c4b))
     LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
     LONG(ZIMAGE_MAGIC(_kernel_bss_size))
diff --git linux-libre-5.4-gnu1/arch/arm/boot/deflate_xip_data.sh linux-libre-5.4.261-gnu1/arch/arm/boot/deflate_xip_data.sh
index 40937248cebe..304495c3c2c5 100755
--- linux-libre-5.4-gnu1/arch/arm/boot/deflate_xip_data.sh
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/deflate_xip_data.sh
@@ -56,7 +56,7 @@ trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
 # substitute the data section by a compressed version
 $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
 $DD if="$XIPIMAGE"  skip=$data_start iflag=skip_bytes |
-gzip -9 >> "$XIPIMAGE.tmp"
+$KGZIP -9 >> "$XIPIMAGE.tmp"
 
 # replace kernel binary
 mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-boneblack-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 7ad079861efd..91f93bc89716 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -131,6 +131,11 @@
 };
 
 / {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
 	clk_mcasp0_fixed: clk_mcasp0_fixed {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
index 1fe3b566ba3d..09b36df140e5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -516,7 +516,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-pcm-953.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 9bfa032bcada..f2d9145b3c6a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,22 +12,20 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-pocketbeagle.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-pocketbeagle.dts
index ff4f919d22f6..abf2badce53d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -88,7 +88,6 @@
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
 		>;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-sancloud-bbe.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e35493..e5fdb7abb0d5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
index 7a9eb2b0d45b..8ec6c4500fd5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1337,8 +1337,7 @@
 				ti,dual-volt;
 				ti,needs-special-reset;
 				ti,needs-special-hs-handling;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am33xx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am33xx.dtsi
index 37e297b72c23..22b8e2ad8750 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am33xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am3517-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..3db30ce134b9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am3517-evm.dts
@@ -160,6 +160,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -167,7 +169,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -192,6 +196,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -204,6 +210,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -222,6 +230,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -230,8 +240,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -299,8 +336,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am3517-som.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am3517-som.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500194fe..126965a34841 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
@@ -829,11 +829,14 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	p8 {
 		/*
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-idk-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-idk-evm.dts
index f3ced6df0c9b..9f66f96d09c9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-idk-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -526,11 +526,11 @@
 	 * Supply voltage supervisor on board will not allow opp50 so
 	 * disable it and set opp100 as suspend OPP.
 	 */
-	opp50@300000000 {
+	opp50-300000000 {
 		status = "disabled";
 	};
 
-	opp100@600000000 {
+	opp100-600000000 {
 		opp-suspend;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-l4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
index 59770dd3785e..64fdd5079d49 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1576,8 +1576,9 @@
 			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xcc000 0x2000>;
@@ -1585,6 +1586,8 @@
 			dcan0: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 0>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1597,8 +1600,9 @@
 			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xd0000 0x2000>;
@@ -1606,6 +1610,8 @@
 			dcan1: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2071,7 +2077,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio6";
 			reg = <0x22000 0x4>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..d0ea95830d45 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
 	};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
@@ -589,7 +589,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -848,6 +848,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
@@ -855,6 +856,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am43xx-clocks.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am43xx-clocks.dtsi
index 091356f2a8c1..c726cd8dbdf1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -704,6 +704,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am571x-idk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am571x-idk.dts
index 0aaacea1d887..10105a497c1a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am571x-idk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am571x-idk.dts
@@ -167,11 +167,7 @@
 
 &pcie1_rc {
 	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 };
 
 &mmc1 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am572x-idk-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13b3880..ddf123620e96 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f1705c0f..a813a0cf3ff3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -29,6 +29,27 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
@@ -547,10 +568,6 @@
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761aeded..e542a9f59e93 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -611,12 +611,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-370.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..c042c416a94a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-370.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-370.dtsi
@@ -74,7 +74,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-375.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-375.dtsi
index 2932a29ae272..230f6dd876a2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-375.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-375.dtsi
@@ -584,7 +584,7 @@
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-380.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..7146cc8f082a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-380.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-380.dtsi
@@ -79,7 +79,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -98,7 +98,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 768b6c5d2129..320c759b4090 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -22,6 +22,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -236,6 +242,7 @@
 		status = "okay";
 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
@@ -290,7 +297,17 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
@@ -306,7 +323,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -341,7 +358,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-385.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..f081f7cb66e5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-385.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-385.dtsi
@@ -84,7 +84,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -103,7 +103,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -125,7 +125,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-388-helios4.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa8c680..a94758090fb0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
 
 	system-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
 		status-led {
 			label = "helios4:green:status";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
 
 	io-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
 		sata1-led {
 			label = "helios4:green:ata1";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -121,11 +127,15 @@
 	fan1: j10-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
 	};
 
 	fan2: j17-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
 	};
 
 	usb2_phy: usb2-phy {
@@ -291,16 +301,22 @@
 						       "mpp39", "mpp40";
 					marvell,function = "sd0";
 				};
-				helios_led_pins: helios-led-pins {
-					marvell,pins = "mpp24", "mpp25",
-						       "mpp49", "mpp50",
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
 						       "mpp52", "mpp53",
 						       "mpp54";
 					marvell,function = "gpio";
 				};
-				helios_fan_pins: helios-fan-pins {
-					marvell,pins = "mpp41", "mpp43",
-						       "mpp48", "mpp55";
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
 					marvell,function = "gpio";
 				};
 				microsom_spi1_cs_pins: spi1-cs-pins {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-38x.dtsi
index 3f4bb44d85f0..5b82e58a1cf0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-38x.dtsi
@@ -165,7 +165,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -175,7 +175,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -339,7 +339,8 @@
 
 			comphy: phy@18300 {
 				compatible = "marvell,armada-380-comphy";
-				reg = <0x18300 0x100>;
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-39x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-39x.dtsi
index b1b86934c688..cd7a46c48d19 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-39x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-39x.dtsi
@@ -457,7 +457,7 @@
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -476,7 +476,7 @@
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -498,7 +498,7 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 267d0c178e55..30abb4b64a1b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -266,11 +266,6 @@
 	reg = <0x11000 0x100>;
 };
 
-&i2c1 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11100 0x100>;
-};
-
 &mpic {
 	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..d55fe162fc7f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -97,7 +97,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -115,7 +115,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -133,7 +133,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -151,7 +151,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..fdcc81819940 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -112,7 +112,7 @@
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -130,7 +130,7 @@
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -148,7 +148,7 @@
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -166,7 +166,7 @@
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -184,7 +184,7 @@
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -202,7 +202,7 @@
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -220,7 +220,7 @@
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -238,7 +238,7 @@
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index c9d88c90135e..9db4d42d0deb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 9870553919b7..f00b19ad4fa6 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 682f729ea25e..c58230fea45f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -81,11 +81,6 @@
 	status = "okay";
 };
 
-&vuart {
-	// VUART Host Console
-	status = "okay";
-};
-
 &uart1 {
 	// Host Console
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 22dade6393d0..d1dbe3b6ad5a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -22,9 +22,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@7f000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0x7f000000 0x01000000>;
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
index dffb595d30e4..679d04d585a4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -371,6 +371,7 @@
 						compatible = "aspeed,ast2400-ibt-bmc";
 						reg = <0xc0 0x18>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 				};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
index e8feb8b66a2f..412c96b3c3ac 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -464,6 +464,7 @@
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 				};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 5b8bf58e89cb..ac723fe898c7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
@@ -208,12 +203,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
@@ -653,12 +648,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 7788d5db65c2..ae6d07dc0283 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -44,8 +44,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@0 {
-					reg = <0x0>;
+				ethernet-phy@7 {
+					reg = <0x7>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 89f0c9979b89..4f63158d6b9b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -69,7 +69,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index ba7f3e646c26..b8db77b7f5d8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -40,7 +40,7 @@
 
 	ahb {
 		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
@@ -125,8 +125,6 @@
 			bus-width = <8>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			non-removable;
-			mmc-ddr-1_8v;
 			status = "okay";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a7b362..400eaf640fe4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -242,6 +242,11 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -259,6 +264,8 @@
 					   &pioE 3 GPIO_ACTIVE_LOW
 					   &pioE 4 GPIO_ACTIVE_LOW
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index fdfc37d716e0..1d101067371b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -133,6 +133,11 @@
 						atmel,pins =
 							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_key_gpio: key_gpio_0 {
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -158,6 +163,8 @@
 					   &pioE 11 GPIO_ACTIVE_HIGH
 					   &pioE 14 GPIO_ACTIVE_HIGH
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9260.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9260.dtsi
index dee9c0c8a096..16c6fd3c4246 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9260.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9260.dtsi
@@ -187,7 +187,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -221,7 +221,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -239,7 +239,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -257,7 +257,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -275,7 +275,7 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -283,7 +283,7 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9261.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9261.dtsi
index dba025a98527..5ed3d745ac86 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9261.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9261.dtsi
@@ -329,7 +329,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -347,7 +347,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -365,7 +365,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9261ek.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9261ek.dts
index c4ef74fea97c..ee90ea09e781 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9261ek.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9263.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9263.dtsi
index 99678abdda93..5c990cfae254 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9263.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9263.dtsi
@@ -183,7 +183,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -201,7 +201,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -219,7 +219,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index bda22700110c..3d694b60d452 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -38,6 +38,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -83,6 +90,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -217,6 +226,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9g45.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9g45.dtsi
index 691c95ea6175..fd179097a4bf 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9g45.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -574,7 +574,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -592,7 +592,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -610,7 +610,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
index 8643b7151565..0121bb0ecde1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -278,23 +278,26 @@
 				atmel,adc-use-res = "highres";
 
 				trigger0 {
-					trigger-name = "timer-counter-0";
+					trigger-name = "external-rising";
 					trigger-value = <0x1>;
+					trigger-external;
 				};
+
 				trigger1 {
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
 				};
 
 				trigger2 {
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
 				};
 
 				trigger3 {
-					trigger-name = "external";
-					trigger-value = <0x13>;
-					trigger-external;
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
 				};
 			};
 
@@ -682,7 +685,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -721,7 +724,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -744,7 +747,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -767,7 +770,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..9ca7b4241c97 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
index e4d49731287f..30574101471a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -75,7 +75,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -83,7 +83,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -91,7 +91,7 @@
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
@@ -217,7 +217,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
index da6d70f09ef1..5a1352fd90d1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -217,7 +217,7 @@
 			#dma-cells = <1>;
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -257,17 +257,17 @@
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
@@ -282,7 +282,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1838e0fa0ff5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -53,18 +53,17 @@
 			  "GPIO18",
 			  "NC", /* GPIO19 */
 			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
 			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
 			  "NC", /* GPIO32 */
 			  "NC", /* GPIO33 */
 			  "NC", /* GPIO34 */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index b75af21069f9..34a85ad9f03c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -24,7 +24,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -74,16 +74,18 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
 			  "NC", /* GPIO42 */
@@ -112,6 +114,7 @@
 &sdhci {
 	#address-cells = <1>;
 	#size-cells = <0>;
+	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 74ed6d047807..d9f63fc59f16 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -43,7 +43,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..3dfce4312dfc 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -63,8 +63,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837.dtsi
index beb6c502dadc..bcad098a7fcc 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm2837.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm2837.dtsi
@@ -38,12 +38,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -52,6 +66,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -60,6 +81,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -68,6 +96,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fcbc2cc..af81f386793c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm283x.dtsi
@@ -40,7 +40,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <80000>;
+					temperature	= <90000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
@@ -183,6 +183,7 @@
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&gpio 0 0 54>;
 
 			/* Defines pin muxing groups according to
 			 * BCM2835-ARM-Peripherals.pdf page 102.
@@ -488,6 +489,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		thermal: thermal@7e212000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..01c48faabfad 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 57ca1cfaecd8..5901160919dc 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@
 		wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		system {
@@ -46,3 +45,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..8e7483272d47 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@
 		5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		system {
@@ -42,7 +41,6 @@
 		2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
@@ -83,3 +81,16 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..bf8154aa203a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -353,8 +355,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
@@ -387,7 +389,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
@@ -488,33 +490,32 @@
 	};
 
 	spi@18029200 {
-		compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 		reg = <0x18029200 0x184>,
 		      <0x18029000 0x124>,
 		      <0x1811b408 0x004>,
 		      <0x180293a0 0x01c>;
 		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
 				  "spi_lr_session_aborted",
 				  "spi_lr_impatient",
 				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
+				  "spi_lr_overread";
 		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		spi_nor: spi-nor@0 {
+		spi_nor: flash@0 {
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm53573.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm53573.dtsi
index 4af8e3293cff..34bd72b5c9cd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm53573.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm63138.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm63138.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm7445.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm7445.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm947189acdbmr.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm947189acdbmr.dts
index b0b8c774a37f..1f0be30e5443 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958300k.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958300k.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958305k.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958305k.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958522er.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb8a08f..e9b2d3b37ca4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958522er.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958522er.dts
@@ -70,8 +70,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958525er.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958525er.dts
index c339771bb22e..dfe145a3d05a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958525er.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958525er.dts
@@ -70,8 +70,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958525xmc.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8288de..17e6a683e678 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
@@ -86,8 +86,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958622hr.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958622hr.dts
index 96a021cebd97..1d1bc8dbb342 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958622hr.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958622hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958623hr.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21d471e..d5d9a273bb6d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958623hr.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958623hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958625hr.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de35ddfb..670363bca917 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958625hr.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958625hr.dts
@@ -90,8 +90,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958625k.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12d83c2..f15cd38c849e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm958625k.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm958625k.dts
@@ -64,8 +64,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm963138dvt.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm988312hr.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..16b212cc8a2a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/bcm988312hr.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dm8148-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dm8148-evm.dts
index 3931fb068ff0..91d1018ab75f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dm8148-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dm8148-evm.dts
@@ -24,12 +24,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dm8148-t410.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dm8148-t410.dts
index 9e43d5ec0bb2..79ccdd4470f4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dm8148-t410.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dm8148-t410.dts
@@ -33,12 +33,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dove.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dove.dtsi
index 2e8a3977219f..347624ea96cd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dove.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dove.dtsi
@@ -129,7 +129,7 @@
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dra62x-j5eco-evm.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 861ab90a3f3a..c16e183822be 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -24,12 +24,12 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &davinci_mdio {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
index 5cac2dd58241..3f845a8531f4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1176,7 +1176,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
@@ -1204,7 +1204,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
@@ -1326,7 +1326,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1359,7 +1359,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
@@ -3059,7 +3059,7 @@
 
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+					clocks = <&gmac_main_clk>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3413,6 +3413,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3441,6 +3442,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3469,6 +3471,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
@@ -3497,6 +3500,7 @@
 				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 				clock-names = "fck";
 				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
 			};
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7.dtsi
index 953f0ffce2a9..f73324cb31f3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -148,6 +149,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2";
 		reg = <0x0 0x44000000 0x0 0x1000000>,
 		      <0x0 0x45000000 0x0 0x1000>;
@@ -171,6 +173,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
@@ -228,6 +231,7 @@
 			#address-cells = <1>;
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -763,3 +767,22 @@
 
 #include "dra7-l4.dtsi"
 #include "dra7xx-clocks.dtsi"
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer4_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dra76x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra76x.dtsi
index cdcba3f561c4..859e4382ac4b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dra76x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra76x.dtsi
@@ -32,8 +32,8 @@
 				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "int0", "int1";
-				clocks = <&mcan_clk>, <&l3_iclk_div>;
-				clock-names = "cclk", "hclk";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
 				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 			};
 		};
@@ -86,3 +86,8 @@
 &usb4_tm {
 	status = "disabled";
 };
+
+&mmc3 {
+	/* dra76x is not affected by i887 */
+	max-frequency = <96000000>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7xx-clocks.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb83bed9..d7d98d2069df 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -796,16 +796,6 @@
 		clock-div = <1>;
 	};
 
-	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-		assigned-clocks = <&ipu1_gfclk_mux>;
-		assigned-clock-parents = <&dpll_core_h22x2_ck>;
-	};
-
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -1564,6 +1554,8 @@
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
+			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+			assigned-clock-parents = <&dpll_core_h22x2_ck>;
 		};
 
 		ipu_clkctrl: ipu-clkctrl@50 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
index dee35e3a5c4b..69d134db6e94 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -75,7 +75,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_NONE>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-monk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
index 248bd372fe70..a23a8749c94e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
@@ -195,7 +195,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
index 86c26a4edfd7..72d6b7c27151 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -239,7 +239,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
@@ -260,7 +260,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4.dtsi
index 433f109d97ca..1dd009c4dc91 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4.dtsi
@@ -605,7 +605,7 @@
 			status = "disabled";
 
 			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4210-universal_c210.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 09d3d54d09ff..1b5578381d78 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -115,7 +115,7 @@
 		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
@@ -124,8 +124,6 @@
 			vci-supply = <&ldo17_reg>;
 			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
 			power-on-delay = <10>;
 			reset-delay = <10>;
 			panel-width-mm = <90>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index ce87d2ff27aa..4b9c4cab0314 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -68,7 +68,7 @@
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+		gpios = <&gpf0 0 GPIO_ACTIVE_HIGH>, <&gpf0 1 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-itop-elite.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-itop-elite.dts
index f6d0a5f5d339..9a2a49420d4d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -179,7 +179,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
index 83be3a797411..3538739c7901 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -139,7 +139,7 @@
 		max77693@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -187,7 +187,7 @@
 		max77693-fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -534,7 +534,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
@@ -588,7 +588,7 @@
 	max77686: max77686_pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ea55f377d17c..424d12ecc901 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -274,7 +274,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		reg = <0x09>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-origen.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
index ecd14b283a6b..c6678c120cbd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos4412-origen.dts
@@ -86,7 +86,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..d7d756614edd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6dc96948a9cc..c7e350ea03fe 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -117,6 +117,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -125,7 +128,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -133,7 +136,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
@@ -284,7 +287,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..737f0e20a452 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
 	max77686: max77686@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-spring.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
index 3d501926c227..2355c5316484 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
@@ -108,7 +108,7 @@
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 		wakeup-source;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
index e0db251e253f..51b1a7f19471 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -116,7 +116,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
@@ -327,6 +326,8 @@
 				regulator-name = "vddq_lcd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				/* Supplies also GPK and GPJ */
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
@@ -637,11 +638,11 @@
 };
 
 &usbdrd_dwc3_0 {
-	dr_mode = "host";
+	dr_mode = "peripheral";
 };
 
 &usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &usbdrd3_0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 369a8a7f2105..481ee99aa9c9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	usb3_1_oc: usb3-1-oc {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
 };
 
 &pinctrl_2 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410.dtsi
index e6f78b1cee7c..d077373cf872 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5410.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5410.dtsi
@@ -398,6 +398,8 @@
 &usbdrd3_0 {
 	clocks = <&clock CLK_USBD300>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
 };
 
 &usbdrd_phy0 {
@@ -409,6 +411,8 @@
 &usbdrd3_1 {
 	clocks = <&clock CLK_USBD301>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
 };
 
 &usbdrd_dwc3_1 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 592d7b45ecc8..53bf988855e0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -349,7 +349,7 @@
 		reg = <0x66>;
 
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 8240e5186972..fb92d87d8ded 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -132,6 +132,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420.dtsi
index 7d51e0f4ab79..5da434ccf12a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5420.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5420.dtsi
@@ -539,7 +539,7 @@
 		};
 
 		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
+			compatible = "samsung,exynos5420-mipi-video-phy";
 			syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 829147e320e0..9e64a4ab9494 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -141,7 +141,7 @@
 		samsung,s2mps11-acokb-ground;
 
 		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d271e7548826..fce5a4579693 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 892d389d6d09..1fc354485403 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd832f0b3..16e1087ec717 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,7 +22,7 @@
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
@@ -30,7 +30,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a02a48..d0bbf2b970df 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f38eed..60cec653ac7c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..0ebda4efd9d0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-wbd111.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-wbd222.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini.dtsi
index 8cf67b11751f..ef4f1c5323bd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/gemini.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx23-evk.dts
index 0b2701ca2921..858b8057e854 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx23.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx23.dtsi
index 8257630f7a49..42700d7f8bf7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx23.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx23.dtsi
@@ -59,7 +59,7 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 0cd75dadf292..188639738dc3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -75,8 +75,8 @@
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx28.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx28.dtsi
index e14d8ef0158b..235c69bd181f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx28.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx28.dtsi
@@ -78,7 +78,7 @@
 				status = "disabled";
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <82 83 84 85
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx35.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx35.dtsi
index 140d540bcdb5..921c699911a4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx35.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx35.dtsi
@@ -59,7 +59,7 @@
 		interrupt-parent = <&avic>;
 		ranges;
 
-		L2: l2-cache@30000000 {
+		L2: cache-controller@30000000 {
 			compatible = "arm,l210-cache";
 			reg = <0x30000000 0x1000>;
 			cache-unified;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx50-evk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx50-evk.dts
index a25da415cb02..907339bc81e5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx50-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx50-evk.dts
@@ -59,7 +59,7 @@
 				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
 				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
 				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
 			>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
index 719ed5ca454a..d002c8f738b5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,14 +53,40 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -76,8 +102,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 
@@ -388,13 +413,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx53-ppd.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx53-ppd.dts
index 5ff9a179c83c..c01dc571b55c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -287,16 +293,13 @@
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
@@ -458,7 +461,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-icore-mipi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index e43bccb78ab2..d8f3821a0ffd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -8,7 +8,7 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
 
 / {
 	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800fec637..ce4a5a807442 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -99,9 +99,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index 0d594e4bd559..a1173bf5bff5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -38,7 +38,7 @@
 };
 
 &switch_ports {
-	/delete-node/ port@2;
+	/delete-node/ port@3;
 };
 
 &touchscreen {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl.dtsi
index 2ed10310a7b7..4bde98033ff4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6dl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6dl.dtsi
@@ -81,6 +81,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b450v3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b450v3.dts
index 95b8f2d71821..fb0980190aa0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b450v3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b650v3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b650v3.dts
index 611cb7ae7e55..8f762d9c5ae9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b650v3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b850v3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b850v3.dts
index e4cb118f88c6..1ea64ecf4291 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-b850v3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -53,17 +53,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
 &ldb {
 	fsl,dual-channel;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index fa27dcdf06f1..1938b04199c4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -377,3 +377,18 @@
 		#interrupt-cells = <1>;
 	};
 };
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index 9c61e3be2d9a..1c46df6827f5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -55,7 +55,7 @@
 		#sound-dai-cells = <0>;
 		clocks = <&clk_ext_audio_codec>;
 		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 387801dde02e..3233927d33b4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -98,30 +98,40 @@
 			reg = <0>;
 			max-speed = <100>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-			reset-post-delay-us = <1000>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c3 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	ltc3676: pmic@3c {
@@ -206,7 +216,7 @@
 	};
 
 	rtc@56 {
-		compatible = "rv3029c2";
+		compatible = "microcrystal,rv3029";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc_hw300>;
 		reg = <0x56>;
@@ -287,6 +297,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2-grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -294,6 +311,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c3: i2c3-grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
@@ -301,6 +325,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
 	pinctrl_pmic_hw300: pmic-hw300-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
@@ -408,6 +439,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q.dtsi
index d038f4117024..013080e709f8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6q.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6q.dtsi
@@ -158,6 +158,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c4ad541c3f5..b165bd6ea53b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -314,6 +314,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -543,8 +545,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -810,6 +810,12 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1a9a9d98f284..14d6fec50dee 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -273,7 +273,7 @@
 
 			/* VDD_AUD_1P8: Audio codec */
 			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8a";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw551x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c23ba229fd05..8c33510c9519 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -105,19 +105,16 @@
 	sound-digital {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
 
-		simple-audio-card,dai-link@0 {
-			format = "i2s";
-
-			cpu {
-				sound-dai = <&ssi2>;
-			};
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
 
-			codec {
-				bitclock-master;
-				frame-master;
-				sound-dai = <&hdmi_receiver>;
-			};
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw560x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index e8e36dfd0a6b..c951834f4984 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -464,7 +464,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-icore.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 7814f1ef0804..fde56f98398d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -384,7 +384,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 		>;
 	};
 
@@ -396,6 +396,7 @@
 			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
 			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
 			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
 		>;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 81c7ebb4b3fb..5e454a694b78 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -167,7 +157,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 
 	i2c_cam: i2c-gpio-cam {
@@ -179,7 +169,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 };
 
@@ -551,7 +541,7 @@
 
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
 			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
 		>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index bc43c75f1745..3617089dbe36 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -403,6 +403,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -432,6 +433,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -441,5 +443,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 6486df3e2942..31fa37d2fe47 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -107,14 +107,14 @@
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <925000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-always-on;
 			};
 
 			vdd_soc: buck2 {
 				regulator-name = "vdd_soc";
-				regulator-min-microvolt = <730000>;
+				regulator-min-microvolt = <1150000>;
 				regulator-max-microvolt = <1380000>;
 				regulator-always-on;
 			};
@@ -183,7 +183,6 @@
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
 	non-removable;
-	vmmc-supply = <&vdd_emmc_1p8>;
 	status = "disabled";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 71ca76a5e4a5..fe59dde41b64 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -749,10 +749,6 @@
 	vin-supply = <&vgen5_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen5_reg>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
index 44a97ba93a95..352ac585ca6b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -153,6 +153,7 @@
 	bus-width = <4>;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;
 	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9035bc..f2649241167e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -54,7 +54,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index f0be516dc28e..9181fbeb833d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -226,7 +226,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 776bfc77f89d..6c8da3f03733 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -98,7 +100,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
@@ -218,6 +220,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -290,7 +293,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 93909796885a..b9b698f72b26 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -166,7 +166,6 @@
 				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 93be00a60c88..a66c4fac6baf 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -627,7 +627,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -640,7 +640,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -774,6 +774,7 @@
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };
 
@@ -1055,7 +1056,6 @@
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
 		>;
 	};
@@ -1068,7 +1068,6 @@
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
 
 		>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
index f8c229979378..db47e560ed02 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qdl.dtsi
@@ -45,6 +45,10 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usb0 = &usbotg;
+		usb1 = &usbh1;
+		usb2 = &usbh2;
+		usb3 = &usbh3;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -156,7 +160,7 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh@110000 {
+		dma_apbh: dma-controller@110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -255,7 +259,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -766,7 +770,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -1039,9 +1043,8 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupt-names = "int0", "pps";
-				interrupts-extended =
-					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
-					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qp.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qp.dtsi
index 5f51f8e5c1fa..3633383db706 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6qp.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
@@ -77,7 +83,6 @@
 };
 
 &fec {
-	/delete-property/interrupts-extended;
 	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sl-evk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
index 4829aa682aeb..bc86cfaaa9c2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sl-evk.dts
@@ -584,10 +584,6 @@
 	vin-supply = <&sw2_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&sw2_reg>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sl.dtsi
index 1a3dde1ecbcc..bafd232218f1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sl.dtsi
@@ -39,6 +39,9 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -121,6 +124,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
@@ -133,7 +139,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,8 +942,10 @@
 			};
 
 			rngb: rngb@21b4000 {
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
 			weim: weim@21b8000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sll-evk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sll-evk.dts
index 3e1d32fdf4b8..5ace9e6acf85 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sll-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,10 +265,6 @@
 	status = "okay";
 };
 
-&reg_3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &snvs_poweroff {
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sll.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sll.dtsi
index 0c28bcc0f00e..abf080e4038c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sll.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sll.dtsi
@@ -36,6 +36,8 @@
 		spi1 = &ecspi2;
 		spi3 = &ecspi3;
 		spi4 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -49,20 +51,18 @@
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
 				/* ARM kHz      SOC-PU uV */
-				996000          1175000
-				792000          1175000
-				396000          1175000
-				198000		1175000
-			>;
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SLL_CLK_ARM>,
@@ -123,6 +123,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -134,7 +137,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,7 +272,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi-controller@2028000 {
+				ssi1: ssi@2028000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,7 +285,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi-controller@202c000 {
+				ssi2: ssi@202c000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,7 +298,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi-controller@2030000 {
+				ssi3: ssi@2030000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -547,7 +550,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
+				phy-3p0-supply = <&reg_3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sabreauto.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044ccd65f..e4719566133c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -99,7 +99,7 @@
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index f1830ed387a5..91a7548fdb8d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -159,10 +159,6 @@
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
index a8ee7087af5a..5a63ca615722 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -141,10 +141,6 @@
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f6972deb5e39..865528b134d8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -213,7 +213,7 @@
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx.dtsi
index 408f2d15daab..68852653dabb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6sx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6sx.dtsi
@@ -49,6 +49,9 @@
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
 		spi4 = &ecspi5;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -163,12 +166,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
@@ -181,7 +190,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -202,7 +211,7 @@
 			power-domains = <&pd_pu>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -949,6 +958,8 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -961,6 +972,8 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -973,6 +986,8 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c2a9dd57e56a..aa86341adaaa 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -215,7 +215,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
index 0205fd56d975..4e99e6c79a68 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -157,10 +157,6 @@
 	status = "okay";
 };
 
-&snvs_poweroff {
-	status = "okay";
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul.dtsi
index fd9068e361d8..03b45bef9d7a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ul.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ul.dtsi
@@ -47,6 +47,8 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -62,20 +64,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -157,6 +157,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -171,7 +174,7 @@
 			      <0x00a06000 0x2000>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -966,7 +969,7 @@
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -975,7 +978,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -996,7 +999,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 038d8c90f6df..621396884c31 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
index d56728f03c35..c83323b9ea53 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
index 917eb0b58b13..1e61e3862106 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -77,7 +77,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -152,7 +152,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
@@ -337,7 +337,6 @@
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	fsl,tuning-step = <2>;
-	max-frequency = <100000000>;
 	vmmc-supply = <&reg_module_3v3>;
 	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
@@ -347,7 +346,7 @@
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7>;
+		     &pinctrl_gpio7 &pinctrl_usbc_det>;
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
@@ -452,7 +451,6 @@
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
@@ -650,6 +648,12 @@
 		>;
 	};
 
+	pinctrl_usbc_det: gpio-usbc-det {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+		>;
+	};
+
 	pinctrl_usbh_reg: gpio-usbh-vbus {
 		fsl,pins = <
 			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
index 50abf18ad30b..887497e3bb4b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -250,7 +250,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 6b4acea1ef79..ecfa179ccab1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -284,7 +284,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..6ad39dca7009 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
index 6f50ebf31a0a..8a8df54ff563 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -307,7 +307,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
index 869efbc4af42..88e62801b82e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d-sdb.dts
@@ -176,13 +176,8 @@
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -356,7 +351,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d.dtsi
index 9c8dd32cc035..8b65ca8b5f30 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7d.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7d.dtsi
@@ -7,6 +7,12 @@
 #include <dt-bindings/reset/imx7-reset.h>
 
 / {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+	};
+
 	cpus {
 		cpu0: cpu@0 {
 			clock-frequency = <996000000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s-colibri.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s-colibri.dtsi
index 1fb1ec5d3d70..6d16e32aed89 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -49,3 +49,7 @@
 		reg = <0x80000000 0x10000000>;
 	};
 };
+
+&gpmi {
+	status = "okay";
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s-warp.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s-warp.dts
index d6b4888fa686..e035dd5bf4f6 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s-warp.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s.dtsi
index 27a4758ceb32..66ae805bc92c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7s.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7s.dtsi
@@ -47,6 +47,8 @@
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbh;
 	};
 
 	cpus {
@@ -504,7 +506,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
@@ -1131,6 +1133,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1143,6 +1147,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1155,6 +1161,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1190,14 +1198,13 @@
 			};
 		};
 
-		dma_apbh: dma-apbh@33000000 {
+		dma_apbh: dma-controller@33000000 {
 			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x33000000 0x2000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7ulp.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
index 6859a3a83750..0108b63df77d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
@@ -37,10 +37,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
-			reg = <0>;
+			reg = <0xf00>;
 		};
 	};
 
@@ -397,7 +397,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLC>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 0 32>;
+			gpio-ranges = <&iomuxc1 0 0 20>;
 		};
 
 		gpio_ptd: gpio@40af0000 {
@@ -411,7 +411,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLD>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 32 32>;
+			gpio-ranges = <&iomuxc1 0 32 12>;
 		};
 
 		gpio_pte: gpio@40b00000 {
@@ -425,7 +425,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 64 32>;
+			gpio-ranges = <&iomuxc1 0 64 16>;
 		};
 
 		gpio_ptf: gpio@40b10000 {
@@ -439,7 +439,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLF>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 96 32>;
+			gpio-ranges = <&iomuxc1 0 96 20>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/integratorap.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/integratorap.dts
index 94d2ff9836d0..e6c5a99e0741 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/integratorap.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/integratorap.dts
@@ -155,6 +155,7 @@
 
 	pci: pciv3@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 7b151acb9984..88b70ba1c8fe 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index f7a841a28865..270e4986b6e6 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 100396f6c2fe..395e05f10d36 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -51,6 +51,8 @@
 
 &mcbsp2 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 };
 
 &charger {
@@ -102,35 +104,18 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	lcd0: display@0 {
-		compatible = "panel-dpi";
-		label = "28";
-		status = "okay";
-		/* default-on; */
+	lcd0: display {
+		/* This isn't the exact LCD, but the timings meet spec */
+		compatible = "logicpd,type28";
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_pin>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <2>;
-			vsync-len = <11>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-			de-active = <1>;
-			pixelclk-active = <0>;
-		};
 	};
 
 	bl: backlight {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
index 07ac99b9cda6..cdb89b3e2a9b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
@@ -11,22 +11,6 @@
 #include "logicpd-torpedo-37xx-devkit.dts"
 
 &lcd0 {
-
-	label = "28";
-
-	panel-timing {
-		clock-frequency = <9000000>;
-		hactive = <480>;
-		vactive = <272>;
-		hfront-porch = <3>;
-		hback-porch = <2>;
-		hsync-len = <42>;
-		vback-porch = <3>;
-		vfront-porch = <2>;
-		vsync-len = <11>;
-		hsync-active = <1>;
-		vsync-active = <1>;
-		de-active = <1>;
-		pixelclk-active = <0>;
-	};
+	/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+	compatible = "logicpd,type28";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 449cc7616da6..e7a8f8addb6e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -80,6 +80,8 @@
 };
 
 &mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/lpc32xx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b1217b..824393e1bcfb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
index 5b7689094b70..7235ce2a3293 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -247,7 +247,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/ls1021a.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ls1021a.dtsi
index 2f6977ada447..aeb8a40b6b60 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/ls1021a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ls1021a.dtsi
@@ -181,7 +181,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x1550000 0x0 0x10000>,
-			      <0x0 0x40000000 0x0 0x40000000>;
+			      <0x0 0x40000000 0x0 0x20000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
@@ -311,39 +311,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -728,7 +695,7 @@
 		};
 
 		mdio0: mdio@2d24000 {
-			compatible = "fsl,etsec2-mdio";
+			compatible = "gianfar";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -737,7 +704,7 @@
 		};
 
 		mdio1: mdio@2d64000 {
-			compatible = "fsl,etsec2-mdio";
+			compatible = "gianfar";
 			device_type = "mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -753,7 +720,7 @@
 			fsl,tmr-prsc    = <2>;
 			fsl,tmr-add     = <0xaaaaaaab>;
 			fsl,tmr-fiper1  = <999999995>;
-			fsl,tmr-fiper2  = <99990>;
+			fsl,tmr-fiper2  = <999999995>;
 			fsl,max-adj     = <499999999>;
 			fsl,extts-fifo;
 		};
@@ -984,4 +951,37 @@
 		};
 
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson.dtsi
index c4447f6c8b2c..e141ce748484 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson.dtsi
@@ -49,14 +49,14 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -94,7 +94,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -196,7 +196,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8.dtsi
index 5a7e3e5caebe..d7c9dbee0f01 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8.dtsi
@@ -129,8 +129,8 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp-182150000 {
-			opp-hz = /bits/ 64 <182150000>;
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
 			opp-microvolt = <1150000>;
 		};
 		opp-318750000 {
@@ -230,8 +230,6 @@
 				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
@@ -243,8 +241,13 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 		};
 	};
@@ -253,7 +256,7 @@
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8-pmu", "syscon";
-		reg = <0xe0 0x8>;
+		reg = <0xe0 0x18>;
 	};
 
 	pinctrl_aobus: pinctrl@84 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-ec100.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
index bed1dfef1985..32d1c322dbc6 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
@@ -148,7 +148,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -232,7 +232,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-mxq.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
index 6e39ad52e42d..ab8fe55963f7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,6 +39,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -84,7 +86,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
index a24eccc354b9..c413af9a7af8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -130,7 +130,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -162,7 +162,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -219,7 +219,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b.dtsi
index 099bf8e711c9..1e8c5d7bc824 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8b.dtsi
@@ -125,8 +125,8 @@
 			opp-hz = /bits/ 64 <255000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp-364300000 {
-			opp-hz = /bits/ 64 <364300000>;
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
 			opp-microvolt = <1100000>;
 		};
 		opp-425000000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b1001c..84b6ed51099d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -83,7 +83,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index d1eae47b83f6..ab91c4ebb146 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -13,8 +13,10 @@
 		#interrupt-cells = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		spi-max-frequency = <3000000>;
+		spi-max-frequency = <9600000>;
 		spi-cs-high;
+		spi-cpol;
+		spi-cpha;
 
 		cpcap_adc: adc {
 			compatible = "motorola,mapphone-cpcap-adc";
@@ -160,12 +162,12 @@
 		regulator-enable-ramp-delay = <1000>;
 	};
 
-	/* Used by DSS */
+	/* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
 	vcsi: VCSI {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-enable-ramp-delay = <1000>;
-		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	vdac: VDAC {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/moxart.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/moxart.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f90f38c..5375c6699843 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -192,6 +192,7 @@
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/mt7623n-rfb-emmc.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b7606130ade9..0447748f9fa0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -138,6 +138,7 @@
 	mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "rgmii";
 		phy-handle = <&phy5>;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..e7534fe9c53c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-cm-t3x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index cdb632df152a..11ae18944195 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..a7f99ae0c1fe 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
index b6ef1a7ac8a4..089e9f1f442b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -515,7 +517,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-gta04a5one.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-gta04a5one.dts
index 9db9fe67cd63..95df45cc70c0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -5,9 +5,11 @@
 
 #include "omap3-gta04a5.dts"
 
-&omap3_pmx_core {
+/ {
 	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
 
+&omap3_pmx_core {
 	gpmc_pins: pinmux_gpmc_pins {
 		pinctrl-single,pins = <
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-lilly-a83x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index c22833d4e568..fba69b3f79c2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-n900.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-n900.dts
index 84a5ade1e865..4227da71cc62 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-n900.dts
@@ -105,6 +105,14 @@
 			linux,code = <SW_FRONT_PROXIMITY>;
 			linux,can-disable;
 		};
+
+		machine_cover {
+			label = "Machine Cover";
+			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
 	};
 
 	isp1707: isp1707 {
@@ -155,6 +163,12 @@
 		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
 	};
 
+	rom_rng: rng {
+		compatible = "nokia,n900-rom-rng";
+		clocks = <&rng_ick>;
+		clock-names = "ick";
+	};
+
 	/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
 	vctcxo: vctcxo {
 		compatible = "fixed-clock";
@@ -808,10 +822,6 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
-	/* For debugging, it is often good idea to remove this GPIO.
-	   It means you can remove back cover (to reboot by removing
-	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };
 
 /* most boards use vaux3, only some old versions use vmmc2 instead */
@@ -843,34 +853,46 @@
 		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v5.1
+		 * (OneNAND Manufacturer: Samsung):
+		 *
+		 *   cs0 GPMC_CS_CONFIG1: 0xfb001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00111100
+		 *   cs0 GPMC_CS_CONFIG3: 0x00020200
+		 *   cs0 GPMC_CS_CONFIG4: 0x11001102
+		 *   cs0 GPMC_CS_CONFIG5: 0x03101616
+		 *   cs0 GPMC_CS_CONFIG6: 0x90060000
+		 */
 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
 		gpmc,burst-read;
 		gpmc,burst-wrap;
 		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
+		gpmc,cs-rd-off-ns = <102>;
+		gpmc,cs-wr-off-ns = <102>;
 		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <12>;
+		gpmc,oe-off-ns = <102>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
+		gpmc,we-off-ns = <102>;
+		gpmc,rd-cycle-ns = <132>;
+		gpmc,wr-cycle-ns = <132>;
+		gpmc,access-ns = <96>;
+		gpmc,page-burst-access-ns = <18>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
+		gpmc,clk-activation-ns = <6>;
+		gpmc,wr-data-mux-bus-ns = <36>;
+		gpmc,wr-access-ns = <96>;
 		gpmc,sync-clk-ps = <15000>;
 
 		/*
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 185ce53de0ec..0523a369a4d7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7fe0f9148232..d340eb722f12 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-pandora-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-pandora-common.dtsi
index ec5891718ae6..4ea5656825de 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -226,6 +226,17 @@
 		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
 	};
 
+	/* wl1251 wifi+bt module */
+	wlan_en: fixed-regulator-wg7210_en {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+	};
+
 	/* wg7210 (wifi+bt module) 32k clock buffer */
 	wg7210_32k: fixed-regulator-wg7210_32k {
 		compatible = "regulator-fixed";
@@ -522,9 +533,30 @@
 	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
 };
 
-/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
 &mmc3 {
-	status = "disabled";
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
 };
 
 /* bluetooth*/
@@ -619,7 +651,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-tao3530.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-tao3530.dtsi
index a7a04d78deeb..f24e2326cfa7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -222,7 +222,7 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	vqmmc-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
 	bus-width = <8>;
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3.dtsi
index 4043ecb38016..0c8fcfb292bf 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3.dtsi
@@ -23,6 +23,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3430-sdp.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
index 0abd61108a53..ec1697982537 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-droid4-xt894.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-droid4-xt894.dts
index a40fe8d49da6..73425f692774 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -656,12 +656,12 @@
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 &timer9 {
 	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 /*
@@ -678,6 +678,7 @@
 &uart3 {
 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
 };
 
 &uart4 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-duovero-parlor.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 8047e8cdb3af..4548d87534e3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -139,7 +139,7 @@
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;	/* gpio_44 */
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
 
 		phy-mode = "mii";
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-panda-es.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
index 9dd307b52604..468ad1b64138 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,7 +46,7 @@
 
 	button_pins: pinmux_button_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4.dtsi
index 7cc95bc1598b..0a36b8fe3fa9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -328,10 +333,10 @@
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x5601fc00 0x4>,
-			      <0x5601fc10 0x4>;
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
 			reg-names = "rev", "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap443x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap443x.dtsi
index cbcdcb4e7d1c..6e320efd9fc1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap443x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
 	};
 
 	ocp {
+		/* 4430 has only gpio_86 tshut and no talert interrupt */
 		bandgap: bandgap@4a002260 {
 			reg = <0x4a002260 0x4
 			       0x4a00232C 0x4>;
 			compatible = "ti,omap4430-bandgap";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
 			#thermal-sensor-cells = <0>;
 		};
@@ -74,3 +76,13 @@
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
index e9d9c8460682..68ab6a95f222 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
index 68ac04641bdb..c7bf68c90ea8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5-cm-t54.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5-cm-t54.dts
index e78d3718f145..d38781025eef 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5-cm-t54.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5.dtsi
index 1fb7937638f0..3b56e993326d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/omap5.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -143,6 +148,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 		reg = <0 0x44000000 0 0x2000>,
 		      <0 0x44800000 0 0x3000>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/owl-s500.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/owl-s500.dtsi
index 5ceb6cc4451d..1dbe4e8b38ac 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/owl-s500.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/owl-s500.dtsi
@@ -84,21 +84,21 @@
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/ox810se.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ox810se.dtsi
index 9f6c2b660ed3..0755e5864c4a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/ox810se.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ox810se.dtsi
@@ -323,8 +323,8 @@
 					interrupt-controller;
 					reg = <0 0x200>;
 					#interrupt-cells = <1>;
-					valid-mask = <0xFFFFFFFF>;
-					clear-mask = <0>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
 				};
 
 				timer0: timer@200 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/ox820.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ox820.dtsi
index c9b327732063..dde4364892bf 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/ox820.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ox820.dtsi
@@ -240,8 +240,8 @@
 					reg = <0 0x200>;
 					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 					#interrupt-cells = <1>;
-					valid-mask = <0xFFFFFFFF>;
-					clear-mask = <0>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
 				};
 
 				timer0: timer@200 {
@@ -287,7 +287,7 @@
 				clocks = <&armclk>;
 			};
 
-			gic: gic@1000 {
+			gic: interrupt-controller@1000 {
 				compatible = "arm,arm11mp-gic";
 				interrupt-controller;
 				#interrupt-cells = <3>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index 5ae860788339..3fcc86d7b735 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -45,18 +45,21 @@
 		emac: gem@30000 {
 			compatible = "cadence,gem";
 			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <31>;
 		};
 
 		dmac1: dmac@40000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <25>;
 		};
 
 		dmac2: dmac@50000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <26>;
 		};
 
@@ -234,6 +237,7 @@
 		axi2pico@c0000000 {
 			compatible = "picochip,axi2pico-pc3x2";
 			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <13 14 15 16 17 18 19 20 21>;
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8b79b4112ee1..8c8a576ab9c0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1147,7 +1147,7 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -1162,7 +1162,6 @@
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1261,9 +1260,9 @@
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
@@ -1305,7 +1304,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};
 
 
@@ -1571,7 +1570,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 56f51599852d..fc31ee980639 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -141,7 +141,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -392,8 +393,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-ipq8064.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 16c0da97932c..976a8a1fa953 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -451,8 +451,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -502,8 +502,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -553,8 +553,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 356e9535f7a6..8b3eb93ec451 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -82,14 +82,12 @@
 		};
 	};
 
-	regulators {
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
 	};
 
 	soc: soc {
@@ -323,6 +321,7 @@
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
index f2aeaccdc1ad..15ff0e8fd0d3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -145,7 +145,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -191,7 +193,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -317,7 +319,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..9de4f17955e3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1213,8 +1213,8 @@
 				#phy-cells = <0>;
 				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2fd59c440903..c73e5b149ac5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -25,6 +25,7 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a73a4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a73a4.dtsi
index dd865f3c2eda..4447f45f0cba 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a73a4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a73a4.dtsi
@@ -131,7 +131,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7740.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7740.dtsi
index 12ffe73bf2bc..155f58e6d4e8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7740.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7740.dtsi
@@ -479,7 +479,7 @@
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7740-cpg-clocks";
 			reg = <0xe6150000 0x10000>;
-			clocks = <&extal1_clk>, <&extalr_clk>;
+			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "system", "pllc0", "pllc1",
 					     "pllc2", "r",
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7743.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7743.dtsi
index de981d629bdd..fdd267819319 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7743.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7743.dtsi
@@ -338,7 +338,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7744.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7744.dtsi
index fa74a262107b..8264481bf876 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7744.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7744.dtsi
@@ -338,7 +338,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7745.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7745.dtsi
index c53f7ff20695..c306713f2ab7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7745.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7745.dtsi
@@ -302,7 +302,7 @@
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
index c755f0b8fd0d..29599adea2ab 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -146,7 +146,7 @@
 	status = "okay";
 
 	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du", "dclkin.0";
+	clock-names = "du.0", "dclkin.0";
 
 	ports {
 		port@0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7779.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7779.dtsi
index ebf5b7cfe215..b3cb6492fc27 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7779.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7779.dtsi
@@ -68,6 +68,14 @@
 		      <0xf0000100 0x100>;
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
@@ -455,6 +463,7 @@
 		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7790.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7790.dtsi
index 5a2747758f67..e3ba00a22eeb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7790.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7790.dtsi
@@ -427,7 +427,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7791.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7791.dtsi
index 6f875502453c..a26f86ccc579 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7791.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7791.dtsi
@@ -350,7 +350,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +360,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +369,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +379,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +388,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +398,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +407,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7793-gose.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
index 42f3313e6988..9f507393c375 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
@@ -339,7 +339,7 @@
 			reg = <0x20>;
 			remote = <&vin1>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -399,7 +399,7 @@
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7793.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7793.dtsi
index bf05110fac4e..fa3839795018 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7793.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7793.dtsi
@@ -336,7 +336,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7794.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7794.dtsi
index 8d797d34816e..9dd952479e68 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/r8a7794.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/r8a7794.dtsi
@@ -290,7 +290,7 @@
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036-evb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..ea23ba98625e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036-evb.dts
@@ -31,7 +31,7 @@
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036-kylin.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf005cc90..2ef47ebeb0cb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036.dtsi
index c776321b2cc4..d282a7b638d8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3036.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3036.dtsi
@@ -128,7 +128,7 @@
 		assigned-clocks = <&cru SCLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3066a.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3066a.dtsi
index 3d1b02f45ffd..1ac9deb3bd39 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3066a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3066a.dtsi
@@ -761,7 +761,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -788,7 +788,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -797,7 +797,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188-bqedison2qc.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index c8b62bbd6a4a..66a0ff196eb1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@
 
 	lvds-encoder {
 		compatible = "ti,sn75lvds83", "lvds-encoder";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			lvds_in_vop0: endpoint {
-				remote-endpoint = <&vop0_out_lvds>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
-			lvds_out_panel: endpoint {
-				remote-endpoint = <&panel_in_lvds>;
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
 			};
 		};
 	};
@@ -465,10 +470,13 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmcq-supply = <&vccio_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio3>;
 		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188-radxarock.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188-radxarock.dts
index c9a7f5409960..f8e51ca3ee00 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188-radxarock.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -67,7 +67,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188.dtsi
index 10ede65d90f3..5e8ba80d7b4f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3188.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
@@ -404,7 +404,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -632,7 +632,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
@@ -701,7 +700,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -723,7 +722,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -732,7 +731,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3228-evb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3228-evb.dts
index 5670b33fd1bd..aed879db6c15 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3228-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3228-evb.dts
@@ -46,7 +46,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3229-xms6.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3229-xms6.dts
index 679fc2b00e5a..933ef69da32a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3229-xms6.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3229-xms6.dts
@@ -150,7 +150,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400",
 			             "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk322x.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk322x.dtsi
index 340ed6ccb08f..d393bb481e74 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk322x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk322x.dtsi
@@ -561,7 +561,7 @@
 				  "pp1",
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
@@ -570,10 +570,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -581,10 +580,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -614,7 +612,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -625,10 +622,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -639,8 +635,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
@@ -1033,7 +1029,7 @@
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
 			};
@@ -1051,7 +1047,7 @@
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-evb-act8846.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 80080767c365..9ac40c100e3f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -53,7 +53,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-firefly.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-firefly.dtsi
index 5e0a19004e46..8d418881166f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -233,7 +233,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-miqi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-miqi.dts
index c41d012c8850..bf8f3f9bb4d5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-miqi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-miqi.dts
@@ -145,7 +145,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 9f9e2bfd1295..7b79a21f9bbb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-rock2-square.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-rock2-square.dts
index cdcdc921ee09..7220de126635 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -165,7 +165,7 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f97ddc..acfb7dc2df56 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -357,10 +357,10 @@
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288.dtsi
index cc893e154fe5..36f943a3f3ad 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3288.dtsi
@@ -238,8 +238,8 @@
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
@@ -771,7 +771,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -813,7 +813,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -827,7 +827,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -838,7 +838,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
@@ -942,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -975,7 +975,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -1188,6 +1188,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
@@ -1575,7 +1576,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3xxx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3xxx.dtsi
index 97307a405e60..0580eea90fbc 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/rk3xxx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/rk3xxx.dtsi
@@ -84,7 +84,7 @@
 		compatible = "arm,mali-400";
 		reg = <0x10090000 0x10000>;
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
-		clock-names = "core", "bus";
+		clock-names = "bus", "core";
 		assigned-clocks = <&cru ACLK_GPU>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_GPU>;
@@ -108,6 +108,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c6410-mini6410.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c6410-mini6410.dts
index 0e159c884f97..0b07b3c31960 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -28,29 +28,21 @@
 		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fin_pll: oscillator@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "fin_pll";
-			#clock-cells = <0>;
-		};
+	fin_pll: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
 
-		xusbxti: oscillator@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-output-names = "xusbxti";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
 	};
 
-	srom-cs1@18000000 {
+	srom-cs1-bus@18000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -59,7 +51,7 @@
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;
@@ -165,6 +157,10 @@
 	};
 };
 
+&clocks {
+	clocks = <&fin_pll>;
+};
+
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -197,12 +193,12 @@
 };
 
 &pinctrl0 {
-	gpio_leds: gpio-leds {
+	gpio_leds: gpio-leds-pins {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c6410-smdk6410.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c6410-smdk6410.dts
index a9a5689dc462..3bf6c450a26e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -69,6 +69,10 @@
 	};
 };
 
+&clocks {
+	clocks = <&fin_pll>;
+};
+
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..0a3186d57cb5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -16,111 +16,111 @@
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpn: gpn {
+	gpn: gpn-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpo: gpo {
+	gpo: gpo-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpp: gpp {
+	gpp: gpp-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpq: gpq {
+	gpq: gpq-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -131,225 +131,225 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa-0", "gpa-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa-2", "gpa-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa-4", "gpa-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa-6", "gpa-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_0: ext-dma-0 {
+	ext_dma_0: ext-dma-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_1: ext-dma-1 {
+	ext_dma_1: ext-dma-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_0: irda-data-0 {
+	irda_data_0: irda-data-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_1: irda-data-1 {
+	irda_data_1: irda-data-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_sdbw: irda-sdbw {
+	irda_sdbw: irda-sdbw-pins {
 		samsung,pins = "gpb-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb-5", "gpb-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_cs: spi0-cs {
+	spi0_cs: spi0-cs-pins {
 		samsung,pins = "gpc-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi1_cs: spi1-cs {
+	spi1_cs: spi1-cs-pins {
 		samsung,pins = "gpc-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpg-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gph-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gph-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gph-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus8: sd1-bus8 {
+	sd1_bus8: sd1-bus8-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus1: sd2-bus1 {
+	sd2_bus1: sd2-bus1-pins {
 		samsung,pins = "gph-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus4: sd2-bus4 {
+	sd2_bus4: sd2-bus4-pins {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_cdclk: i2s0-cdclk {
+	i2s0_cdclk: i2s0-cdclk-pins {
 		samsung,pins = "gpd-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_cdclk: i2s1-cdclk {
+	i2s1_cdclk: i2s1-cdclk-pins {
 		samsung,pins = "gpe-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
@@ -357,50 +357,50 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_cdclk: i2s2-cdclk {
+	i2s2_cdclk: i2s2-cdclk-pins {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_extclk: pcm0-extclk {
+	pcm0_extclk: pcm0-extclk-pins {
 		samsung,pins = "gpd-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_extclk: pcm1-extclk {
+	pcm1_extclk: pcm1-extclk-pins {
 		samsung,pins = "gpe-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_0: ac97-bus-0 {
+	ac97_bus_0: ac97-bus-0-pins {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_1: ac97-bus-1 {
+	ac97_bus_1: ac97-bus-1-pins {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_port: cam-port {
+	cam_port: cam-port-pins {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
@@ -408,242 +408,242 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_rst: cam-rst {
+	cam_rst: cam-rst-pins {
 		samsung,pins = "gpf-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_field: cam-field {
+	cam_field: cam-field-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm_extclk: pwm-extclk {
+	pwm_extclk: pwm-extclk-pins {
 		samsung,pins = "gpf-13";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpf-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpf-15";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	clkout0: clkout-0 {
+	clkout0: clkout-0-pins {
 		samsung,pins = "gpf-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_0: keypad-col0-0 {
+	keypad_col0_0: keypad-col0-0-pins {
 		samsung,pins = "gph-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_0: keypad-col1-0 {
+	keypad_col1_0: keypad-col1-0-pins {
 		samsung,pins = "gph-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_0: keypad-col2-0 {
+	keypad_col2_0: keypad-col2-0-pins {
 		samsung,pins = "gph-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_0: keypad-col3-0 {
+	keypad_col3_0: keypad-col3-0-pins {
 		samsung,pins = "gph-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_0: keypad-col4-0 {
+	keypad_col4_0: keypad-col4-0-pins {
 		samsung,pins = "gph-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_0: keypad-col5-0 {
+	keypad_col5_0: keypad-col5-0-pins {
 		samsung,pins = "gph-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_0: keypad-col6-0 {
+	keypad_col6_0: keypad-col6-0-pins {
 		samsung,pins = "gph-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_0: keypad-col7-0 {
+	keypad_col7_0: keypad-col7-0-pins {
 		samsung,pins = "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_1: keypad-col0-1 {
+	keypad_col0_1: keypad-col0-1-pins {
 		samsung,pins = "gpl-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_1: keypad-col1-1 {
+	keypad_col1_1: keypad-col1-1-pins {
 		samsung,pins = "gpl-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_1: keypad-col2-1 {
+	keypad_col2_1: keypad-col2-1-pins {
 		samsung,pins = "gpl-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_1: keypad-col3-1 {
+	keypad_col3_1: keypad-col3-1-pins {
 		samsung,pins = "gpl-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_1: keypad-col4-1 {
+	keypad_col4_1: keypad-col4-1-pins {
 		samsung,pins = "gpl-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_1: keypad-col5-1 {
+	keypad_col5_1: keypad-col5-1-pins {
 		samsung,pins = "gpl-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_1: keypad-col6-1 {
+	keypad_col6_1: keypad-col6-1-pins {
 		samsung,pins = "gpl-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_1: keypad-col7-1 {
+	keypad_col7_1: keypad-col7-1-pins {
 		samsung,pins = "gpl-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_0: keypad-row0-0 {
+	keypad_row0_0: keypad-row0-0-pins {
 		samsung,pins = "gpk-8";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_0: keypad-row1-0 {
+	keypad_row1_0: keypad-row1-0-pins {
 		samsung,pins = "gpk-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_0: keypad-row2-0 {
+	keypad_row2_0: keypad-row2-0-pins {
 		samsung,pins = "gpk-10";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_0: keypad-row3-0 {
+	keypad_row3_0: keypad-row3-0-pins {
 		samsung,pins = "gpk-11";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_0: keypad-row4-0 {
+	keypad_row4_0: keypad-row4-0-pins {
 		samsung,pins = "gpk-12";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_0: keypad-row5-0 {
+	keypad_row5_0: keypad-row5-0-pins {
 		samsung,pins = "gpk-13";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_0: keypad-row6-0 {
+	keypad_row6_0: keypad-row6-0-pins {
 		samsung,pins = "gpk-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_0: keypad-row7-0 {
+	keypad_row7_0: keypad-row7-0-pins {
 		samsung,pins = "gpk-15";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_1: keypad-row0-1 {
+	keypad_row0_1: keypad-row0-1-pins {
 		samsung,pins = "gpn-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_1: keypad-row1-1 {
+	keypad_row1_1: keypad-row1-1-pins {
 		samsung,pins = "gpn-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_1: keypad-row2-1 {
+	keypad_row2_1: keypad-row2-1-pins {
 		samsung,pins = "gpn-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_1: keypad-row3-1 {
+	keypad_row3_1: keypad-row3-1-pins {
 		samsung,pins = "gpn-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_1: keypad-row4-1 {
+	keypad_row4_1: keypad-row4-1-pins {
 		samsung,pins = "gpn-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_1: keypad-row5-1 {
+	keypad_row5_1: keypad-row5-1-pins {
 		samsung,pins = "gpn-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_1: keypad-row6-1 {
+	keypad_row6_1: keypad-row6-1-pins {
 		samsung,pins = "gpn-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_1: keypad-row7-1 {
+	keypad_row7_1: keypad-row7-1-pins {
 		samsung,pins = "gpn-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
@@ -652,7 +652,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
 				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
@@ -662,7 +662,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
 				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
@@ -673,7 +673,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	hsi_bus: hsi-bus {
+	hsi_bus: hsi-bus-pins {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210-aries.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b856334..d419b77201f7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -454,6 +454,7 @@
 	pinctrl-names = "default";
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
+	keep-power-in-suspend;
 
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210-smdkv210.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 84b38f185199..53a841ecf7a4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -15,6 +15,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include "s5pv210.dtsi"
 
@@ -31,11 +32,18 @@
 		reg = <0x20000000 0x40000000>;
 	};
 
-	ethernet@18000000 {
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
-		interrupts = <1 4>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];
 		davicom,no-eeprom;
 	};
@@ -47,6 +55,14 @@
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
@@ -147,6 +163,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sdhci0 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210.dtsi
index 2ad642f51fd9..cd8f6e7a7f7f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/s5pv210.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@
 		};
 	};
 
+	xxti: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xxti";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xusbxti";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
 		onenand: onenand@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
@@ -100,19 +92,16 @@
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
@@ -128,35 +117,28 @@
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		spi0: spi@e1300000 {
@@ -229,43 +211,36 @@
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {
@@ -596,7 +571,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d2.dtsi
index 2e2c1a7b1d1d..dbfdffd54003 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d2.dtsi
@@ -526,7 +526,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -648,6 +648,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				no-memory-wc;
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
@@ -716,7 +717,7 @@
 
 			can0: can@f8054000 {
 				compatible = "bosch,m_can";
-				reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
 				reg-names = "m_can", "message_ram";
 				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
 					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -932,13 +933,13 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
 			can1: can@fc050000 {
 				compatible = "bosch,m_can";
-				reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
 				reg-names = "m_can", "message_ram";
 				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
 					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -948,7 +949,7 @@
 				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
 				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				assigned-clock-rates = <40000000>;
-				bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
 				status = "disabled";
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3.dtsi
index f770aace0efd..203d40be70a5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_can.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_can.dtsi
index cf06a018ed0f..2470dd3fff25 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_can.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_tcb1.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 1584035daf51..215802b8db30 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_uart.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_uart.dtsi
index 4316bdbdc25d..cb62adbd28ed 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d4.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7b388d..a4cef07c38cb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sama5d4.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sama5d4.dtsi
@@ -914,7 +914,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga.dtsi
index 4f3993cc0227..451030897220 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga.dtsi
@@ -710,7 +710,7 @@
 			};
 		};
 
-		L2: l2-cache@fffef000 {
+		L2: cache-controller@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
 			interrupts = <0 38 0x04>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria10.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria10.dtsi
index 2a86e72d9791..f261a3344071 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -636,7 +636,7 @@
 			reg = <0xffcfb100 0x80>;
 		};
 
-		L2: l2-cache@fffff000 {
+		L2: cache-controller@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -819,7 +819,7 @@
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
 			resets = <&rst L4SYSTIMER1_RESET>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index b4c0a76a4d1a..4c2fcfcc7bae 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -12,7 +12,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f..1b02d46496a8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..51bb436784e2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -124,7 +124,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..cae9ddd5ed38 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -169,7 +169,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..3f7aa7bf0863 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -116,7 +116,7 @@
 	flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..25874e1b9c82 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -224,7 +224,7 @@
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -241,7 +241,7 @@
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/spear1340.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear1340.dtsi
index 1a8f5e8b10e3..66cd473ecb61 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/spear1340.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear1340.dtsi
@@ -136,9 +136,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
-					<&dwdma0 13 1 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/spear13xx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear13xx.dtsi
index f187da4485f4..78672db9068b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/spear13xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
-					<&dwdma0 5 0 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/spear320-hmi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..5c562fb4886f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/spear320-hmi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear320-hmi.dts
@@ -242,7 +242,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/spear3xx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear3xx.dtsi
index f266b7b03482..cc88ebe7a60c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/spear3xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear3xx.dtsi
@@ -47,7 +47,7 @@
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/spear600.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..9d5a04a46b14 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/spear600.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index f78b4eabd68c..e7178a6db6be 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stihxxx-b2120.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 60e11045ad76..d051f080e52e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -46,7 +46,7 @@
 			/* DAC */
 			format = "i2s";
 			mclk-fs = <256>;
-			frame-inversion = <1>;
+			frame-inversion;
 			cpu {
 				sound-dai = <&sti_uni_player2>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32429i-eval.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
index ba08624c6237..4f45e71a1e4d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
@@ -112,17 +112,15 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32746g-eval.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
index 2b1664884ae7..8d64b52838c0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f429-disco.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
index e19d0fe7dbda..49ae2d72afc9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
@@ -79,12 +79,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f429.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f429.dtsi
index 5c8a826b3195..dd41342ef017 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f429.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -623,8 +619,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -639,8 +633,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -696,7 +688,7 @@
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f469-disco.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
index a3ff04940aec..0ce450123dda 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
@@ -76,6 +76,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -97,12 +104,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
@@ -155,6 +160,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f7-pinctrl.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9314128df185..639a6b65749f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -284,6 +284,88 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f746.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f746.dtsi
index d26f93f8b9c2..60680fcf8eb3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f746.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -366,9 +362,9 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -533,8 +529,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -549,8 +543,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f769-disco.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
index 6f1d0ac8c31c..a4284b761e7f 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32h743.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32h743.dtsi
index c065266ee377..82a234c64b8b 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32h743.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32h743.dtsi
@@ -438,8 +438,6 @@
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -454,8 +452,6 @@
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32mp157a-avenger96.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 2e4742c53d04..7b8c3f25861c 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -91,6 +91,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+
 		phy0: ethernet-phy@7 {
 			reg = <7>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32mp157c.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32mp157c.dtsi
index f98e0370c0bc..0e9e930c60f0 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/stm32mp157c.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -515,7 +515,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
@@ -773,7 +773,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -783,7 +783,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -804,7 +804,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -814,7 +814,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -835,7 +835,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -845,7 +845,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1191,7 +1191,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1201,7 +1201,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
@@ -1311,12 +1311,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1339,6 +1333,12 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usbh-ohci@5800c000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun4i-a10.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun4i-a10.dtsi
index 4c268b70b735..2265ca24c0c7 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun4i-a10.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -143,7 +143,7 @@
 			trips {
 				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
@@ -198,7 +198,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun5i.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun5i.dtsi
index 6befa236ba99..fd31da8fd311 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun5i.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun5i.dtsi
@@ -117,7 +117,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun6i-a31-hummingbird.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 049e6ab3cf56..73de34ae37fd 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -154,7 +154,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45a35c0..8945dbb114a2 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -130,7 +130,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index bb3987e101c2..0b3d9ae75650 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -132,7 +132,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 01ccff756996..5740f9442705 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-cubietruck.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8c8dee6ea461..9109ca0919ad 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -151,7 +151,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 9ba62774e89a..488933b87ad5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index fce2f7fcd084..bf38c66c1815 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -115,7 +115,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd6accf..1f8b45f07e58 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun7i-a20.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -180,7 +180,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 9d34eabba121..431f70234d36 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_sw>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	allwinner,rx-delay-ps = <700>;
 	allwinner,tx-delay-ps = <700>;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fb928503ad45..d8326a5c681d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -101,7 +101,7 @@
 		initial-mode = <1>; /* initialize in HUB mode */
 		disabled-ports = <1>;
 		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
 		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		refclk-frequency = <19200000>;
 	};
@@ -183,7 +183,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_dldo4>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 3bec3e0a81b2..6bf93e5ed681 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -358,8 +358,8 @@
 };
 
 &reg_dldo3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vdd-csi";
 };
 
@@ -482,7 +482,8 @@
 };
 
 &usbphy {
-	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_vmain>;
 	usb2_vbus-supply = <&reg_vmain>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
index 74bb053cf23c..4e485e45fbc5 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -313,7 +313,7 @@
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_PLL_DE>;
 			clock-names = "bus",
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d043031b..4c6704e4c57e 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@
 
 		pwr_led {
 			label = "bananapi-m2-zero:red:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
 			default-state = "on";
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb73208939..babf4cf1b2f6 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2e0c13..b6ca45d18e51 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
index e37c30e811d3..6056f206c9e3 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1ba1dc..7db89500f399 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -129,7 +129,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
@@ -223,16 +223,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-r40.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-r40.dtsi
index c9c2688db66d..339402601990 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-r40.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -118,7 +118,7 @@
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-r40-de2-clk",
 				     "allwinner,sun8i-h3-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -266,6 +266,16 @@
 			#phy-cells = <1>;
 		};
 
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
 		ehci1: usb@1c19000 {
 			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 			reg = <0x01c19000 0x100>;
@@ -557,17 +567,6 @@
 			#size-cells = <0>;
 		};
 
-		ahci: sata@1c18000 {
-			compatible = "allwinner,sun8i-r40-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
-			resets = <&ccu RST_BUS_SATA>;
-			reset-names = "ahci";
-			status = "disabled";
-
-		};
-
 		gmac: ethernet@1c50000 {
 			compatible = "allwinner,sun8i-r40-gmac";
 			syscon = <&ccu>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-v3s.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-v3s.dtsi
index 23ba56df38f7..50c32cf72c65 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -105,7 +105,7 @@
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-v3s-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -423,7 +423,7 @@
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
+			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 15c22b06fc4b..47954551f573 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -120,7 +120,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
@@ -198,16 +198,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b043a1..484b93df20cb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sun9i-a80-optimus.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335e5631..5c3580d712e4 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/suniv-f1c100s.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..def830101448 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -104,8 +104,10 @@
 
 		wdt: watchdog@1c20ca0 {
 			compatible = "allwinner,suniv-f1c100s-wdt",
-				     "allwinner,sun4i-a10-wdt";
+				     "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
 		};
 
 		uart0: serial@1c25000 {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 22466afd38a3..235994a4a2eb 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,15 +16,27 @@
 		regulator-type = "voltage";
 		regulator-boot-on;
 		regulator-always-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1300000>;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
 		regulator-ramp-delay = <50>; /* 4ms */
 		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
 		gpios-states = <0x1>;
-		states = <1100000 0>, <1300000 1>;
+		states = <1108475 0>, <1308475 1>;
 	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 39263e74fbb5..8e5cb3b3fd68 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -126,7 +126,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-h3-h5.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 107eeafad20a..b3141c964c3a 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -113,7 +113,7 @@
 
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 20137fc578b1..69cb65d86c46 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,10 +183,11 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -202,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -211,7 +212,7 @@
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -221,10 +222,9 @@
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 4eddbb8d7fca..049ca941b479 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -571,7 +571,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -585,8 +585,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -681,8 +681,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/versatile-ab.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/versatile-ab.dts
index 37bd41ff8dff..151c0220047d 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/versatile-ab.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/versatile-ab.dts
@@ -195,16 +195,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/versatile-pb.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/versatile-pb.dts
index 06a0fdf24026..e7e751a858d8 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/versatile-pb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/versatile-pb.dts
@@ -7,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index dfae90adbb7c..ce64bfb22f22 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -31,7 +31,7 @@
 			#interrupt-cells = <1>;
 			ranges;
 
-			nor_flash: flash@0,00000000 {
+			nor_flash: flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>,
 				      <4 0x00000000 0x04000000>;
@@ -41,13 +41,13 @@
 				};
 			};
 
-			psram@1,00000000 {
+			psram@100000000 {
 				compatible = "arm,vexpress-psram", "mtd-ram";
 				reg = <1 0x00000000 0x02000000>;
 				bank-width = <4>;
 			};
 
-			ethernet@2,02000000 {
+			ethernet@202000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x02000000 0x10000>;
 				interrupts = <15>;
@@ -59,14 +59,14 @@
 				vddvario-supply = <&v2m_fixed_3v3>;
 			};
 
-			usb@2,03000000 {
+			usb@203000000 {
 				compatible = "nxp,usb-isp1761";
 				reg = <2 0x03000000 0x20000>;
 				interrupts = <16>;
 				port1-otg;
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/vexpress-v2p-ca5s.dts linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index d5b47d526f9e..7f1edc3ba6a1 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
diff --git linux-libre-5.4-gnu1/arch/arm/boot/dts/vfxxx.dtsi linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vfxxx.dtsi
index 028e0ec30e0c..fa248066d9d9 100644
--- linux-libre-5.4-gnu1/arch/arm/boot/dts/vfxxx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm/boot/dts/vfxxx.dtsi
@@ -495,7 +495,7 @@
 			};
 
 			ocotp: ocotp@400a5000 {
-				compatible = "fsl,vf610-ocotp";
+				compatible = "fsl,vf610-ocotp", "syscon";
 				reg = <0x400a5000 0x1000>;
 				clocks = <&clks VF610_CLK_OCOTP>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm/configs/aspeed_g5_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/aspeed_g5_defconfig
index 597536cc9573..b87508c7056c 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/aspeed_g5_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/aspeed_g5_defconfig
@@ -139,6 +139,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_ASPEED_VUART=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_ASPEED_KCS_IPMI_BMC=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
diff --git linux-libre-5.4-gnu1/arch/arm/configs/exynos_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/exynos_defconfig
index 08db1c83eb2d..34d4acbcee34 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/exynos_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/exynos_defconfig
@@ -38,6 +38,7 @@ CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
@@ -92,6 +93,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
@@ -290,6 +292,7 @@ CONFIG_CROS_EC_SPI=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_EXYNOS_IOMMU=y
+CONFIG_PM_DEVFREQ=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
@@ -348,9 +351,13 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_PROVE_LOCKING=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
diff --git linux-libre-5.4-gnu1/arch/arm/configs/imx_v6_v7_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/imx_v6_v7_defconfig
index 0f7381ee0c37..dabb80453249 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/imx_v6_v7_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/imx_v6_v7_defconfig
@@ -460,6 +460,7 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git linux-libre-5.4-gnu1/arch/arm/configs/omap2plus_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/omap2plus_defconfig
index 40d7f1a4fc45..4ec69fb8a698 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/omap2plus_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/omap2plus_defconfig
@@ -552,5 +552,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git linux-libre-5.4-gnu1/arch/arm/configs/rpc_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/rpc_defconfig
index 3b82b64950d9..c090643b1ecb 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/rpc_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/rpc_defconfig
@@ -32,7 +32,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
diff --git linux-libre-5.4-gnu1/arch/arm/configs/s3c2410_defconfig linux-libre-5.4.261-gnu1/arch/arm/configs/s3c2410_defconfig
index 73ed73a8785a..153009130dab 100644
--- linux-libre-5.4-gnu1/arch/arm/configs/s3c2410_defconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/configs/s3c2410_defconfig
@@ -202,7 +202,6 @@ CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/Kconfig linux-libre-5.4.261-gnu1/arch/arm/crypto/Kconfig
index 043b0b18bf7e..f747caea10ff 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/Kconfig
@@ -30,7 +30,7 @@ config CRYPTO_SHA1_ARM_NEON
 
 config CRYPTO_SHA1_ARM_CE
 	tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
 	select CRYPTO_SHA1_ARM
 	select CRYPTO_HASH
 	help
@@ -39,7 +39,7 @@ config CRYPTO_SHA1_ARM_CE
 
 config CRYPTO_SHA2_ARM_CE
 	tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
 	select CRYPTO_SHA256_ARM
 	select CRYPTO_HASH
 	help
@@ -96,7 +96,7 @@ config CRYPTO_AES_ARM_BS
 
 config CRYPTO_AES_ARM_CE
 	tristate "Accelerated AES using ARMv8 Crypto Extensions"
-	depends on KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_LIB_AES
 	select CRYPTO_SIMD
@@ -106,7 +106,7 @@ config CRYPTO_AES_ARM_CE
 
 config CRYPTO_GHASH_ARM_CE
 	tristate "PMULL-accelerated GHASH using NEON/ARMv8 Crypto Extensions"
-	depends on KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
 	select CRYPTO_HASH
 	select CRYPTO_CRYPTD
 	select CRYPTO_GF128MUL
@@ -118,12 +118,14 @@ config CRYPTO_GHASH_ARM_CE
 
 config CRYPTO_CRCT10DIF_ARM_CE
 	tristate "CRCT10DIF digest algorithm using PMULL instructions"
-	depends on KERNEL_MODE_NEON && CRC_T10DIF
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
+	depends on CRC_T10DIF
 	select CRYPTO_HASH
 
 config CRYPTO_CRC32_ARM_CE
 	tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions"
-	depends on KERNEL_MODE_NEON && CRC32
+	depends on KERNEL_MODE_NEON && (CC_IS_CLANG || GCC_VERSION >= 40800)
+	depends on CRC32
 	select CRYPTO_HASH
 
 config CRYPTO_CHACHA20_NEON
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/Makefile linux-libre-5.4.261-gnu1/arch/arm/crypto/Makefile
index 4180f3a13512..c0d36771a693 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/Makefile
@@ -12,32 +12,12 @@ obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
 
-ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
-ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
-ce-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
-ce-obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
-ce-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o
-crc-obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o
-
-ifneq ($(crc-obj-y)$(crc-obj-m),)
-ifeq ($(call as-instr,.arch armv8-a\n.arch_extension crc,y,n),y)
-ce-obj-y += $(crc-obj-y)
-ce-obj-m += $(crc-obj-m)
-else
-$(warning These CRC Extensions modules need binutils 2.23 or higher)
-$(warning $(crc-obj-y) $(crc-obj-m))
-endif
-endif
-
-ifneq ($(ce-obj-y)$(ce-obj-m),)
-ifeq ($(call as-instr,.fpu crypto-neon-fp-armv8,y,n),y)
-obj-y += $(ce-obj-y)
-obj-m += $(ce-obj-m)
-else
-$(warning These ARMv8 Crypto Extensions modules need binutils 2.23 or higher)
-$(warning $(ce-obj-y) $(ce-obj-m))
-endif
-endif
+obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
+obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
+obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
+obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
+obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o
+obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o
 
 aes-arm-y	:= aes-cipher-core.o aes-cipher-glue.o
 aes-arm-bs-y	:= aes-neonbs-core.o aes-neonbs-glue.o
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/aes-ce-core.S linux-libre-5.4.261-gnu1/arch/arm/crypto/aes-ce-core.S
index 4d1707388d94..312428d83eed 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/aes-ce-core.S
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/aes-ce-core.S
@@ -386,20 +386,32 @@ ENTRY(ce_aes_ctr_encrypt)
 .Lctrloop4x:
 	subs		r4, r4, #4
 	bmi		.Lctr1x
-	add		r6, r6, #1
+
+	/*
+	 * NOTE: the sequence below has been carefully tweaked to avoid
+	 * a silicon erratum that exists in Cortex-A57 (#1742098) and
+	 * Cortex-A72 (#1655431) cores, where AESE/AESMC instruction pairs
+	 * may produce an incorrect result if they take their input from a
+	 * register of which a single 32-bit lane has been updated the last
+	 * time it was modified. To work around this, the lanes of registers
+	 * q0-q3 below are not manipulated individually, and the different
+	 * counter values are prepared by successive manipulations of q7.
+	 */
+	add		ip, r6, #1
 	vmov		q0, q7
+	rev		ip, ip
+	add		lr, r6, #2
+	vmov		s31, ip			@ set lane 3 of q1 via q7
+	add		ip, r6, #3
+	rev		lr, lr
 	vmov		q1, q7
-	rev		ip, r6
-	add		r6, r6, #1
+	vmov		s31, lr			@ set lane 3 of q2 via q7
+	rev		ip, ip
 	vmov		q2, q7
-	vmov		s7, ip
-	rev		ip, r6
-	add		r6, r6, #1
+	vmov		s31, ip			@ set lane 3 of q3 via q7
+	add		r6, r6, #4
 	vmov		q3, q7
-	vmov		s11, ip
-	rev		ip, r6
-	add		r6, r6, #1
-	vmov		s15, ip
+
 	vld1.8		{q4-q5}, [r1]!
 	vld1.8		{q6}, [r1]!
 	vld1.8		{q15}, [r1]!
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/crct10dif-ce-core.S linux-libre-5.4.261-gnu1/arch/arm/crypto/crct10dif-ce-core.S
index 86be258a803f..46c02c518a30 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/crct10dif-ce-core.S
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/crct10dif-ce-core.S
@@ -72,7 +72,7 @@
 #endif
 
 	.text
-	.arch		armv7-a
+	.arch		armv8-a
 	.fpu		crypto-neon-fp-armv8
 
 	init_crc	.req	r0
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/ghash-ce-core.S linux-libre-5.4.261-gnu1/arch/arm/crypto/ghash-ce-core.S
index c47fe81abcb0..9f51e3fa4526 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/ghash-ce-core.S
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/ghash-ce-core.S
@@ -8,6 +8,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+	.arch		armv8-a
+	.fpu		crypto-neon-fp-armv8
+
 	SHASH		.req	q0
 	T1		.req	q1
 	XL		.req	q2
@@ -88,7 +91,6 @@
 	T3_H		.req	d17
 
 	.text
-	.fpu		crypto-neon-fp-armv8
 
 	.macro		__pmull_p64, rd, rn, rm, b1, b2, b3, b4
 	vmull.p64	\rd, \rn, \rm
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/nhpoly1305-neon-glue.c linux-libre-5.4.261-gnu1/arch/arm/crypto/nhpoly1305-neon-glue.c
index ae5aefc44a4d..ffa8d73fe722 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/nhpoly1305-neon-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/nhpoly1305-neon-glue.c
@@ -30,7 +30,7 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha1-ce-core.S linux-libre-5.4.261-gnu1/arch/arm/crypto/sha1-ce-core.S
index 49a74a441aec..8a702e051738 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha1-ce-core.S
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha1-ce-core.S
@@ -10,6 +10,7 @@
 #include <asm/assembler.h>
 
 	.text
+	.arch		armv8-a
 	.fpu		crypto-neon-fp-armv8
 
 	k0		.req	q0
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha2-ce-core.S linux-libre-5.4.261-gnu1/arch/arm/crypto/sha2-ce-core.S
index 4ad517577e23..b6369d2440a1 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha2-ce-core.S
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha2-ce-core.S
@@ -10,6 +10,7 @@
 #include <asm/assembler.h>
 
 	.text
+	.arch		armv8-a
 	.fpu		crypto-neon-fp-armv8
 
 	k0		.req	q7
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha256-armv4.pl linux-libre-5.4.261-gnu1/arch/arm/crypto/sha256-armv4.pl
index a03cf4dfb781..d927483985c2 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha256-armv4.pl
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha256-armv4.pl
@@ -175,7 +175,6 @@ $code=<<___;
 #else
 .syntax unified
 # ifdef __thumb2__
-#  define adrl adr
 .thumb
 # else
 .code   32
@@ -471,7 +470,8 @@ sha256_block_data_order_neon:
 	stmdb	sp!,{r4-r12,lr}
 
 	sub	$H,sp,#16*4+16
-	adrl	$Ktbl,K256
+	adr	$Ktbl,.Lsha256_block_data_order
+	sub	$Ktbl,$Ktbl,#.Lsha256_block_data_order-K256
 	bic	$H,$H,#15		@ align for 128-bit stores
 	mov	$t2,sp
 	mov	sp,$H			@ alloca
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha256-core.S_shipped linux-libre-5.4.261-gnu1/arch/arm/crypto/sha256-core.S_shipped
index 054aae0edfce..9deb515f3c9f 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha256-core.S_shipped
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha256-core.S_shipped
@@ -56,7 +56,6 @@
 #else
 .syntax unified
 # ifdef __thumb2__
-#  define adrl adr
 .thumb
 # else
 .code   32
@@ -1885,7 +1884,8 @@ sha256_block_data_order_neon:
 	stmdb	sp!,{r4-r12,lr}
 
 	sub	r11,sp,#16*4+16
-	adrl	r14,K256
+	adr	r14,.Lsha256_block_data_order
+	sub	r14,r14,#.Lsha256_block_data_order-K256
 	bic	r11,r11,#15		@ align for 128-bit stores
 	mov	r12,sp
 	mov	sp,r11			@ alloca
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha512-armv4.pl linux-libre-5.4.261-gnu1/arch/arm/crypto/sha512-armv4.pl
index 788c17b56ecc..2a0bdf7dd87c 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha512-armv4.pl
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha512-armv4.pl
@@ -212,7 +212,6 @@ $code=<<___;
 #else
 .syntax unified
 # ifdef __thumb2__
-#  define adrl adr
 .thumb
 # else
 .code   32
@@ -602,7 +601,8 @@ sha512_block_data_order_neon:
 	dmb				@ errata #451034 on early Cortex A8
 	add	$len,$inp,$len,lsl#7	@ len to point at the end of inp
 	VFP_ABI_PUSH
-	adrl	$Ktbl,K512
+	adr	$Ktbl,.Lsha512_block_data_order
+	sub	$Ktbl,$Ktbl,.Lsha512_block_data_order-K512
 	vldmia	$ctx,{$A-$H}		@ load context
 .Loop_neon:
 ___
diff --git linux-libre-5.4-gnu1/arch/arm/crypto/sha512-core.S_shipped linux-libre-5.4.261-gnu1/arch/arm/crypto/sha512-core.S_shipped
index 710ea309769e..cf5a7a70ff00 100644
--- linux-libre-5.4-gnu1/arch/arm/crypto/sha512-core.S_shipped
+++ linux-libre-5.4.261-gnu1/arch/arm/crypto/sha512-core.S_shipped
@@ -79,7 +79,6 @@
 #else
 .syntax unified
 # ifdef __thumb2__
-#  define adrl adr
 .thumb
 # else
 .code   32
@@ -543,7 +542,8 @@ sha512_block_data_order_neon:
 	dmb				@ errata #451034 on early Cortex A8
 	add	r2,r1,r2,lsl#7	@ len to point at the end of inp
 	VFP_ABI_PUSH
-	adrl	r3,K512
+	adr	r3,.Lsha512_block_data_order
+	sub	r3,r3,.Lsha512_block_data_order-K512
 	vldmia	r0,{d16-d23}		@ load context
 .Loop_neon:
 	vshr.u64	d24,d20,#14	@ 0
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/assembler.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/assembler.h
index 99929122dad7..70e1c23feedb 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/assembler.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/assembler.h
@@ -18,11 +18,11 @@
 #endif
 
 #include <asm/ptrace.h>
-#include <asm/domain.h>
 #include <asm/opcodes-virt.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 
 #define IOMEM(x)	(x)
 
@@ -107,6 +107,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -269,10 +279,9 @@
 	.endif							;\
 	.popsection
 #define ALT_UP_B(label)					\
-	.equ	up_b_offset, label - 9998b			;\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	W(b)	. + up_b_offset					;\
+	W(b)	. + (label - 9998b)					;\
 	.popsection
 #else
 #define ALT_SMP(instr...)
@@ -446,79 +455,6 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.size \name , . - \name
 	.endm
 
-	.macro	csdb
-#ifdef CONFIG_THUMB2_KERNEL
-	.inst.w	0xf3af8014
-#else
-	.inst	0xe320f014
-#endif
-	.endm
-
-	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
-#ifndef CONFIG_CPU_USE_DOMAINS
-	adds	\tmp, \addr, #\size - 1
-	sbcscc	\tmp, \tmp, \limit
-	bcs	\bad
-#ifdef CONFIG_CPU_SPECTRE
-	movcs	\addr, #0
-	csdb
-#endif
-#endif
-	.endm
-
-	.macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
-#ifdef CONFIG_CPU_SPECTRE
-	sub	\tmp, \limit, #1
-	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
-	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
-	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
-	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
-	csdb
-#endif
-	.endm
-
-	.macro	uaccess_disable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_DISABLE
-	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_enable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	/*
-	 * Whenever we re-enter userspace, the domains should always be
-	 * set appropriately.
-	 */
-	mov	\tmp, #DACR_UACCESS_ENABLE
-	mcr	p15, 0, \tmp, c3, c0, 0
-	.if	\isb
-	instr_sync
-	.endif
-#endif
-	.endm
-
-	.macro	uaccess_save, tmp
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	mrc	p15, 0, \tmp, c3, c0, 0
-	str	\tmp, [sp, #SVC_DACR]
-#endif
-	.endm
-
-	.macro	uaccess_restore
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-	ldr	r0, [sp, #SVC_DACR]
-	mcr	p15, 0, r0, c3, c0, 0
-#endif
-	.endm
-
 	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
 	.macro	ret\c, reg
 #if __LINUX_ARM_ARCH__ < 6
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/bugs.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/bugs.h
index 97a312ba0840..fe385551edec 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/bugs.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/bugs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/include/asm/bugs.h
- *
  *  Copyright (C) 1995-2003 Russell King
  */
 #ifndef __ASM_BUGS_H
@@ -10,10 +8,8 @@
 extern void check_writebuffer_bugs(void);
 
 #ifdef CONFIG_MMU
-extern void check_bugs(void);
 extern void check_other_bugs(void);
 #else
-#define check_bugs() do { } while (0)
 #define check_other_bugs() do { } while (0)
 #endif
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/clocksource.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/clocksource.h
index 0b350a7e26f3..afb7a59828fe 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/clocksource.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/clocksource.h
@@ -1,8 +1,17 @@
 #ifndef _ASM_CLOCKSOURCE_H
 #define _ASM_CLOCKSOURCE_H
 
+enum vdso_arch_clockmode {
+	/* vdso clocksource not usable */
+	VDSO_CLOCKMODE_NONE,
+	/* vdso clocksource usable */
+	VDSO_CLOCKMODE_ARCHTIMER,
+	VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT = VDSO_CLOCKMODE_ARCHTIMER,
+};
+
 struct arch_clocksource_data {
-	bool vdso_direct;	/* Usable for direct VDSO access? */
+	/* Usable for direct VDSO access? */
+	enum vdso_arch_clockmode clock_mode;
 };
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/fixmap.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/fixmap.h
index 472c93db5dac..763c3f65e30c 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/fixmap.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/fixmap.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#define FIXADDR_START		0xffc00000UL
+#define FIXADDR_START		0xffc80000UL
 #define FIXADDR_END		0xfff00000UL
 #define FIXADDR_TOP		(FIXADDR_END - PAGE_SIZE)
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/ftrace.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/ftrace.h
index 18b0197f2384..15bd9af13497 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/ftrace.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/ftrace.h
@@ -16,6 +16,9 @@ extern void __gnu_mcount_nc(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 struct dyn_arch_ftrace {
+#ifdef CONFIG_ARM_MODULE_PLTS
+	struct module *mod;
+#endif
 };
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/futex.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/futex.h
index 83c391b597d4..fdc4ae3e7378 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/futex.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/futex.h
@@ -164,8 +164,13 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 	preempt_enable();
 #endif
 
-	if (!ret)
-		*oval = oldval;
+	/*
+	 * Store unconditionally. If ret != 0 the extra store is the least
+	 * of the worries but GCC cannot figure out that __futex_atomic_op()
+	 * is either setting ret to -EFAULT or storing the old value in
+	 * oldval which results in a uninitialized warning at the call site.
+	 */
+	*oval = oldval;
 
 	return ret;
 }
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/insn.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/insn.h
index f20e08ac85ae..5475cbf9fb6b 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/insn.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/insn.h
@@ -13,18 +13,18 @@ arm_gen_nop(void)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn);
 
 static inline unsigned long
 arm_gen_branch(unsigned long pc, unsigned long addr)
 {
-	return __arm_gen_branch(pc, addr, false);
+	return __arm_gen_branch(pc, addr, false, true);
 }
 
 static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
+arm_gen_branch_link(unsigned long pc, unsigned long addr, bool warn)
 {
-	return __arm_gen_branch(pc, addr, true);
+	return __arm_gen_branch(pc, addr, true, warn);
 }
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/io.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/io.h
index 7a0596fcb2e7..3cc0f6d50883 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/io.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/io.h
@@ -457,6 +457,9 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
 extern int devmem_is_allowed(unsigned long pfn);
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
 #endif
 
 /*
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kexec-internal.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kexec-internal.h
new file mode 100644
index 000000000000..ecc2322db7aa
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kexec-internal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARM_KEXEC_INTERNAL_H
+#define _ARM_KEXEC_INTERNAL_H
+
+struct kexec_relocate_data {
+	unsigned long kexec_start_address;
+	unsigned long kexec_indirection_page;
+	unsigned long kexec_mach_type;
+	unsigned long kexec_r2;
+};
+
+#endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kprobes.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kprobes.h
index 213607a1f45c..e26a278d301a 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/kprobes.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kprobes.h
@@ -44,20 +44,20 @@ int kprobe_exceptions_notify(struct notifier_block *self,
 			     unsigned long val, void *data);
 
 /* optinsn template addresses */
-extern __visible kprobe_opcode_t optprobe_template_entry;
-extern __visible kprobe_opcode_t optprobe_template_val;
-extern __visible kprobe_opcode_t optprobe_template_call;
-extern __visible kprobe_opcode_t optprobe_template_end;
-extern __visible kprobe_opcode_t optprobe_template_sub_sp;
-extern __visible kprobe_opcode_t optprobe_template_add_sp;
-extern __visible kprobe_opcode_t optprobe_template_restore_begin;
-extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn;
-extern __visible kprobe_opcode_t optprobe_template_restore_end;
+extern __visible kprobe_opcode_t optprobe_template_entry[];
+extern __visible kprobe_opcode_t optprobe_template_val[];
+extern __visible kprobe_opcode_t optprobe_template_call[];
+extern __visible kprobe_opcode_t optprobe_template_end[];
+extern __visible kprobe_opcode_t optprobe_template_sub_sp[];
+extern __visible kprobe_opcode_t optprobe_template_add_sp[];
+extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
+extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
+extern __visible kprobe_opcode_t optprobe_template_restore_end[];
 
 #define MAX_OPTIMIZED_LENGTH	4
 #define MAX_OPTINSN_SIZE				\
-	((unsigned long)&optprobe_template_end -	\
-	 (unsigned long)&optprobe_template_entry)
+	((unsigned long)optprobe_template_end -	\
+	 (unsigned long)optprobe_template_entry)
 #define RELATIVEJUMP_SIZE	4
 
 struct arch_optimized_insn {
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_asm.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_asm.h
index f615830f9f57..9d0b7e677faa 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_asm.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_asm.h
@@ -56,7 +56,7 @@ extern char __kvm_hyp_init_end[];
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
-extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
+extern void __kvm_flush_cpu_context(struct kvm_vcpu *vcpu);
 
 extern void __kvm_timer_set_cntvoff(u32 cntvoff_low, u32 cntvoff_high);
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_emulate.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_emulate.h
index 40002416efec..c1747fcb86d3 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_emulate.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_emulate.h
@@ -14,13 +14,25 @@
 #include <asm/cputype.h>
 
 /* arm64 compatibility macros */
+#define PSR_AA32_MODE_FIQ	FIQ_MODE
+#define PSR_AA32_MODE_SVC	SVC_MODE
 #define PSR_AA32_MODE_ABT	ABT_MODE
 #define PSR_AA32_MODE_UND	UND_MODE
 #define PSR_AA32_T_BIT		PSR_T_BIT
+#define PSR_AA32_F_BIT		PSR_F_BIT
 #define PSR_AA32_I_BIT		PSR_I_BIT
 #define PSR_AA32_A_BIT		PSR_A_BIT
 #define PSR_AA32_E_BIT		PSR_E_BIT
 #define PSR_AA32_IT_MASK	PSR_IT_MASK
+#define PSR_AA32_GE_MASK	0x000f0000
+#define PSR_AA32_DIT_BIT	0x00200000
+#define PSR_AA32_PAN_BIT	0x00400000
+#define PSR_AA32_SSBS_BIT	0x00800000
+#define PSR_AA32_Q_BIT		PSR_Q_BIT
+#define PSR_AA32_V_BIT		PSR_V_BIT
+#define PSR_AA32_C_BIT		PSR_C_BIT
+#define PSR_AA32_Z_BIT		PSR_Z_BIT
+#define PSR_AA32_N_BIT		PSR_N_BIT
 
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
 
@@ -41,6 +53,11 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v)
 	*__vcpu_spsr(vcpu) = v;
 }
 
+static inline unsigned long host_spsr_to_spsr32(unsigned long spsr)
+{
+	return spsr;
+}
+
 static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu,
 					 u8 reg_num)
 {
@@ -177,12 +194,17 @@ static inline bool kvm_vcpu_dabt_issext(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_SSE;
 }
 
+static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+
 static inline int kvm_vcpu_dabt_get_rd(struct kvm_vcpu *vcpu)
 {
 	return (kvm_vcpu_get_hsr(vcpu) & HSR_SRT_MASK) >> HSR_SRT_SHIFT;
 }
 
-static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu)
+static inline bool kvm_vcpu_abt_iss1tw(const struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW;
 }
@@ -214,16 +236,21 @@ static inline bool kvm_vcpu_trap_il_is32bit(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_IL;
 }
 
-static inline u8 kvm_vcpu_trap_get_class(struct kvm_vcpu *vcpu)
+static inline u8 kvm_vcpu_trap_get_class(const struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) >> HSR_EC_SHIFT;
 }
 
-static inline bool kvm_vcpu_trap_is_iabt(struct kvm_vcpu *vcpu)
+static inline bool kvm_vcpu_trap_is_iabt(const struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_trap_get_class(vcpu) == HSR_EC_IABT;
 }
 
+static inline bool kvm_vcpu_trap_is_exec_fault(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_trap_is_iabt(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu);
+}
+
 static inline u8 kvm_vcpu_trap_get_fault(struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) & HSR_FSC;
@@ -341,6 +368,7 @@ static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu,
 	}
 }
 
-static inline void vcpu_ptrauth_setup_lazy(struct kvm_vcpu *vcpu) {}
+static inline bool vcpu_has_ptrauth(struct kvm_vcpu *vcpu) { return false; }
+static inline void vcpu_ptrauth_disable(struct kvm_vcpu *vcpu) { }
 
 #endif /* __ARM_KVM_EMULATE_H__ */
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_host.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_host.h
index 8a37c8e89777..d8ac89879327 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_host.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_host.h
@@ -15,6 +15,7 @@
 #include <asm/kvm_asm.h>
 #include <asm/kvm_mmio.h>
 #include <asm/fpstate.h>
+#include <asm/spectre.h>
 #include <kvm/arm_arch_timer.h>
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
@@ -266,7 +267,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva_range(struct kvm *kvm,
-			unsigned long start, unsigned long end);
+			unsigned long start, unsigned long end, unsigned flags);
 int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
@@ -335,6 +336,7 @@ static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
 
 static inline void kvm_arm_init_debug(void) {}
+static inline void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {}
@@ -421,4 +423,12 @@ static inline bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu)
 	return true;
 }
 
+#define kvm_arm_vcpu_loaded(vcpu)	(false)
+
+static inline int kvm_arm_get_spectre_bhb_state(void)
+{
+	/* 32bit guests don't need firmware for this */
+	return SPECTRE_VULNERABLE; /* aka SMCCC_RET_NOT_SUPPORTED */
+}
+
 #endif /* __ARM_KVM_HOST_H__ */
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_mmio.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_mmio.h
index 7c0eddb0adb2..32fbf82e3ebc 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/kvm_mmio.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/kvm_mmio.h
@@ -14,6 +14,8 @@
 struct kvm_decode {
 	unsigned long rt;
 	bool sign_extend;
+	/* Not used on 32-bit arm */
+	bool sixty_four;
 };
 
 void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/mach/map.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/mach/map.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/memory.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/memory.h
index 99035b5891ef..f717d7122d9d 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/memory.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/memory.h
@@ -67,6 +67,10 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
+#define FDT_FIXED_BASE		UL(0xff800000)
+#define FDT_FIXED_SIZE		(2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase)	((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
+
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
 #define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
+#define FDT_VIRT_BASE(physbase)  ((void *)(physbase))
 
 #endif /* !CONFIG_MMU */
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/module.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/module.h
index 182163b55546..961fedbd810e 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/module.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/module.h
@@ -19,8 +19,18 @@ enum {
 };
 #endif
 
+#define PLT_ENT_STRIDE		L1_CACHE_BYTES
+#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
+#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
+
+struct plt_entries {
+	u32	ldr[PLT_ENT_COUNT];
+	u32	lit[PLT_ENT_COUNT];
+};
+
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
+	struct plt_entries	*plt_ent;
 	int			plt_count;
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/percpu.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/percpu.h
index f44f448537f2..1a3eedbac4a2 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/percpu.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/percpu.h
@@ -5,6 +5,8 @@
 #ifndef _ASM_ARM_PERCPU_H_
 #define _ASM_ARM_PERCPU_H_
 
+#include <asm/thread_info.h>
+
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
  * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/perf_event.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/perf_event.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-2level.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-2level.h
index 51beec41d48c..50b51ac91fcb 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-2level.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-2level.h
@@ -75,6 +75,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-3level.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-3level.h
index 5b18295021a0..8006a56cc2ce 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-3level.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-3level.h
@@ -25,6 +25,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-nommu.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-nommu.h
index 010fa1a35a68..e8ac2f95fb37 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable-nommu.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable-nommu.h
@@ -51,12 +51,6 @@
 
 typedef pte_t *pte_addr_t;
 
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable.h
index 3ae120cd1715..ecfd6e7e128f 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/pgtable.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/4level-fixup.h>
@@ -166,13 +175,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/prom.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/prom.h
index 1e36c40533c1..402e3f34c7ed 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/prom.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/prom.h
@@ -9,12 +9,12 @@
 
 #ifdef CONFIG_OF
 
-extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(void *dt_virt);
 extern void __init arm_dt_init_cpu_maps(void);
 
 #else /* CONFIG_OF */
 
-static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(void *dt_virt)
 {
 	return NULL;
 }
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/ptrace.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/ptrace.h
index 91d6b7856be4..73c83f4d33b3 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/ptrace.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/ptrace.h
@@ -164,5 +164,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/spectre.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/timex.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/timex.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/uaccess-asm.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/uaccess-asm.h
new file mode 100644
index 000000000000..907571fd05c6
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/uaccess-asm.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_UACCESS_ASM_H__
+#define __ASM_UACCESS_ASM_H__
+
+#include <asm/asm-offsets.h>
+#include <asm/domain.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+
+	.macro	csdb
+#ifdef CONFIG_THUMB2_KERNEL
+	.inst.w	0xf3af8014
+#else
+	.inst	0xe320f014
+#endif
+	.endm
+
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcscc	\tmp, \tmp, \limit
+	bcs	\bad
+#ifdef CONFIG_CPU_SPECTRE
+	movcs	\addr, #0
+	csdb
+#endif
+#endif
+	.endm
+
+	.macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
+#ifdef CONFIG_CPU_SPECTRE
+	sub	\tmp, \limit, #1
+	subs	\tmp, \tmp, \addr	@ tmp = limit - 1 - addr
+	addhs	\tmp, \tmp, #1		@ if (tmp >= 0) {
+	subshs	\tmp, \tmp, \size	@ tmp = limit - (addr + size) }
+	movlo	\addr, #0		@ if (tmp < 0) addr = NULL
+	csdb
+#endif
+	.endm
+
+	.macro	uaccess_disable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+	.macro	uaccess_enable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_ENABLE
+	mcr	p15, 0, \tmp, c3, c0, 0
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS)
+#define DACR(x...)	x
+#else
+#define DACR(x...)
+#endif
+
+	/*
+	 * Save the address limit on entry to a privileged exception.
+	 *
+	 * If we are using the DACR for kernel access by the user accessors
+	 * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain
+	 * back to client mode, whether or not \disable is set.
+	 *
+	 * If we are using SW PAN, set the DACR user domain to no access
+	 * if \disable is set.
+	 */
+	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
+	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+	mov	\tmp2, #TASK_SIZE
+	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
+ DACR(	str	\tmp0, [sp, #SVC_DACR])
+	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
+	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
+	/* kernel=client, user=no access */
+	mov	\tmp2, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
+	.elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS)
+	/* kernel=client */
+	bic	\tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL)
+	orr	\tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT)
+	mcr	p15, 0, \tmp2, c3, c0, 0
+	instr_sync
+	.endif
+	.endm
+
+	/* Restore the user access state previously saved by uaccess_entry */
+	.macro	uaccess_exit, tsk, tmp0, tmp1
+	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
+ DACR(	ldr	\tmp0, [sp, #SVC_DACR])
+	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
+ DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
+	.endm
+
+#undef DACR
+
+#endif /* __ASM_UACCESS_ASM_H__ */
diff --git linux-libre-5.4-gnu1/arch/arm/include/asm/vfpmacros.h linux-libre-5.4.261-gnu1/arch/arm/include/asm/vfpmacros.h
index 628c336e8e3b..947ee5395e1f 100644
--- linux-libre-5.4-gnu1/arch/arm/include/asm/vfpmacros.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/asm/vfpmacros.h
@@ -19,23 +19,25 @@
 
 	@ read all the working registers back into the VFP
 	.macro	VFPFLDMIA, base, tmp
+	.fpu	vfpv2
 #if __LINUX_ARM_ARCH__ < 6
-	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
+	fldmiax	\base!, {d0-d15}
 #else
-	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
+	vldmia	\base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+	.fpu	vfpv3
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPD32
-	ldclne	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	vldmiane \base!, {d16-d31}
 	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	ldcleq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	vldmiaeq \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
 #endif
@@ -44,22 +46,23 @@
 	@ write all the working registers out of the VFP
 	.macro	VFPFSTMIA, base, tmp
 #if __LINUX_ARM_ARCH__ < 6
-	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
+	fstmiax	\base!, {d0-d15}
 #else
-	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
+	vstmia	\base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+	.fpu	vfpv3
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPD32
-	stclne	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	vstmiane \base!, {d16-d31}
 	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	stcleq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	vstmiaeq \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/include/uapi/asm/kvm.h linux-libre-5.4.261-gnu1/arch/arm/include/uapi/asm/kvm.h
index 2769360f195c..89b8e70068a1 100644
--- linux-libre-5.4-gnu1/arch/arm/include/uapi/asm/kvm.h
+++ linux-libre-5.4.261-gnu1/arch/arm/include/uapi/asm/kvm.h
@@ -227,6 +227,12 @@ struct kvm_vcpu_events {
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED	(1U << 4)
 
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+	/* Higher values mean better protection. */
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
 /* Device Control API: ARM VGIC */
 #define KVM_DEV_ARM_VGIC_GRP_ADDR	0
 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/Makefile linux-libre-5.4.261-gnu1/arch/arm/kernel/Makefile
index 8cad59465af3..dc31426cae6d 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/Makefile
@@ -17,10 +17,14 @@ CFLAGS_REMOVE_return_address.o = -pg
 # Object file lists.
 
 obj-y		:= elf.o entry-common.o irq.o opcodes.o \
-		   process.o ptrace.o reboot.o return_address.o \
+		   process.o ptrace.o reboot.o \
 		   setup.o signal.o sigreturn_codes.o \
 		   stacktrace.o sys_arm.o time.o traps.o
 
+ifneq ($(CONFIG_ARM_UNWIND),y)
+obj-$(CONFIG_FRAME_POINTER)	+= return_address.o
+endif
+
 obj-$(CONFIG_ATAGS)		+= atags_parse.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
@@ -102,4 +106,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/asm-offsets.c linux-libre-5.4.261-gnu1/arch/arm/kernel/asm-offsets.c
index c773b829ee8e..4ce2e29da14d 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/asm-offsets.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/asm-offsets.c
@@ -15,6 +15,7 @@
 #include <linux/kvm_host.h>
 #endif
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
@@ -26,6 +27,7 @@
 #include <asm/vdso_datapage.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
 #include "signal.h"
 
 /*
@@ -159,6 +161,8 @@ int main(void)
   DEFINE(SLEEP_SAVE_SP_PHYS,	offsetof(struct sleep_save_sp, save_ptr_stash_phys));
   DEFINE(SLEEP_SAVE_SP_VIRT,	offsetof(struct sleep_save_sp, save_ptr_stash));
 #endif
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
   BLANK();
   DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
   DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
@@ -190,5 +194,9 @@ int main(void)
   DEFINE(MPU_RGN_PRBAR,	offsetof(struct mpu_rgn, prbar));
   DEFINE(MPU_RGN_PRLAR,	offsetof(struct mpu_rgn, prlar));
 #endif
+  DEFINE(KEXEC_START_ADDR,	offsetof(struct kexec_relocate_data, kexec_start_address));
+  DEFINE(KEXEC_INDIR_PAGE,	offsetof(struct kexec_relocate_data, kexec_indirection_page));
+  DEFINE(KEXEC_MACH_TYPE,	offsetof(struct kexec_relocate_data, kexec_mach_type));
+  DEFINE(KEXEC_R2,		offsetof(struct kexec_relocate_data, kexec_r2));
   return 0; 
 }
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/atags.h linux-libre-5.4.261-gnu1/arch/arm/kernel/atags.h
index 067e12edc341..f2819c25b602 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/atags.h
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/atags.h
@@ -2,11 +2,11 @@
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
-const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+const struct machine_desc *setup_machine_tags(void *__atags_vaddr,
 	unsigned int machine_nr);
 #else
 static inline const struct machine_desc * __init __noreturn
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr)
 {
 	early_print("no ATAGS support: can't continue\n");
 	while (true);
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/atags_parse.c linux-libre-5.4.261-gnu1/arch/arm/kernel/atags_parse.c
index ce02f92f4ab2..8288151631fc 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/atags_parse.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/atags_parse.c
@@ -176,7 +176,7 @@ static void __init squash_mem_tags(struct tag *tag)
 }
 
 const struct machine_desc * __init
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
 {
 	struct tag *tags = (struct tag *)&default_tags;
 	const struct machine_desc *mdesc = NULL, *p;
@@ -197,8 +197,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 	if (!mdesc)
 		return NULL;
 
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
+	if (atags_vaddr)
+		tags = atags_vaddr;
 	else if (mdesc->atag_offset)
 		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/bugs.c linux-libre-5.4.261-gnu1/arch/arm/kernel/bugs.c
index 14c8dbbb7d2d..087bce6ec8e9 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/bugs.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/bugs.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/init.h>
+#include <linux/cpu.h>
 #include <asm/bugs.h>
 #include <asm/proc-fns.h>
 
@@ -11,7 +12,7 @@ void check_other_bugs(void)
 #endif
 }
 
-void __init check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 	check_writebuffer_bugs();
 	check_other_bugs();
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/devtree.c linux-libre-5.4.261-gnu1/arch/arm/kernel/devtree.c
index 39c978698406..4e09883c276d 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/devtree.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/devtree.c
@@ -203,12 +203,12 @@ static const void * __init arch_get_next_mach(const char *const **match)
 
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
+ * @dt_virt: virtual address of dt blob
  *
  * If a dtb was passed to the kernel in r2, then use it to choose the
  * correct machine_desc and to setup the system.
  */
-const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
@@ -221,7 +221,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
+	if (!dt_virt || !early_init_dt_verify(dt_virt))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/entry-armv.S linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-armv.S
index 858d4e541532..8e8efe28d799 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/entry-armv.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-armv.S
@@ -27,6 +27,7 @@
 #include <asm/unistd.h>
 #include <asm/tls.h>
 #include <asm/system_info.h>
+#include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
 #include <asm/entry-macro-multi.S>
@@ -179,15 +180,7 @@ ENDPROC(__und_invalid)
 	stmia	r7, {r2 - r6}
 
 	get_thread_info tsk
-	ldr	r0, [tsk, #TI_ADDR_LIMIT]
-	mov	r1, #TASK_SIZE
-	str	r1, [tsk, #TI_ADDR_LIMIT]
-	str	r0, [sp, #SVC_ADDR_LIMIT]
-
-	uaccess_save r0
-	.if \uaccess
-	uaccess_disable r0
-	.endif
+	uaccess_entry tsk, r0, r1, r2, \uaccess
 
 	.if \trace
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -259,31 +252,10 @@ __und_svc:
 #else
 	svc_entry
 #endif
-	@
-	@ call emulation code, which returns using r9 if it has emulated
-	@ the instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	@  r0 - instruction
-	@
-#ifndef CONFIG_THUMB2_KERNEL
-	ldr	r0, [r4, #-4]
-#else
-	mov	r1, #2
-	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
-	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	blo	__und_svc_fault
-	ldrh	r9, [r4]			@ bottom 16 bits
-	add	r4, r4, #2
-	str	r4, [sp, #S_PC]
-	orr	r0, r9, r0, lsl #16
-#endif
-	badr	r9, __und_svc_finish
-	mov	r2, r4
-	bl	call_fpe
 
 	mov	r1, #4				@ PC correction to apply
-__und_svc_fault:
+ THUMB(	tst	r5, #PSR_T_BIT		)	@ exception taken in Thumb mode?
+ THUMB(	movne	r1, #2			)	@ if so, fix up PC correction
 	mov	r0, sp				@ struct pt_regs *regs
 	bl	__und_fault
 
@@ -624,11 +596,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -637,7 +607,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
@@ -1035,12 +1005,11 @@ vector_\name:
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
+
+	@ Save spsr_<exception> (parent CPSR)
+2:	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
 	@
@@ -1061,6 +1030,44 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	W(b)	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb
+	isb
+	b	2b
+ENDPROC(vector_bhb_loop8_\name)
+
+vector_bhb_bpiall_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	2b
+ENDPROC(vector_bhb_bpiall_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
@@ -1069,6 +1076,10 @@ ENDPROC(vector_\name)
 	.section .stubs, "ax", %progbits
 	@ This must be the first word
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.word	vector_bhb_loop8_swi
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1183,8 +1194,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1217,6 +1230,30 @@ vector_addrexcptn:
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+.L__vectors_bhb_loop8_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+.L__vectors_bhb_bpiall_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/entry-common.S linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-common.S
index 271cb8a1eba1..bd619da73c84 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/entry-common.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-common.S
@@ -162,6 +162,29 @@ ENDPROC(ret_from_fork)
  *-----------------------------------------------------------------------------
  */
 
+	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
 	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
@@ -169,6 +192,7 @@ ENTRY(vector_swi)
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/entry-header.S linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-header.S
index 32051ec5b33f..40db0f9188b6 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/entry-header.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/entry-header.S
@@ -6,6 +6,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/errno.h>
 #include <asm/thread_info.h>
+#include <asm/uaccess-asm.h>
 #include <asm/v7m.h>
 
 @ Bad Abort numbers
@@ -217,9 +218,7 @@
 	blne	trace_hardirqs_off
 #endif
 	.endif
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode SVC restore
@@ -263,9 +262,7 @@
 	@ on the stack remains correct).
 	@
 	.macro  svc_exit_via_fiq
-	ldr	r1, [sp, #SVC_ADDR_LIMIT]
-	uaccess_restore
-	str	r1, [tsk, #TI_ADDR_LIMIT]
+	uaccess_exit tsk, r0, r1
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode restore
 	mov	r0, sp
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/ftrace.c linux-libre-5.4.261-gnu1/arch/arm/kernel/ftrace.c
index bda949fd84e8..12b6da56f88d 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/ftrace.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/ftrace.c
@@ -71,9 +71,10 @@ int ftrace_arch_code_modify_post_process(void)
 	return 0;
 }
 
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
+					 bool warn)
 {
-	return arm_gen_branch_link(pc, addr);
+	return arm_gen_branch_link(pc, addr, warn);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -112,14 +113,14 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
+	new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 	if (!ret) {
 		pc = (unsigned long)&ftrace_regs_call;
-		new = ftrace_call_replace(pc, (unsigned long)func);
+		new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 		ret = ftrace_modify_code(pc, 0, new, false);
 	}
@@ -132,10 +133,22 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
+	unsigned long aaddr = adjust_address(rec, addr);
+	struct module *mod = NULL;
+
+#ifdef CONFIG_ARM_MODULE_PLTS
+	mod = rec->arch.mod;
+#endif
 
 	old = ftrace_nop_replace(rec);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, aaddr, !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!new && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		new = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -148,9 +161,9 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
+	old = ftrace_call_replace(ip, adjust_address(rec, old_addr), true);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, adjust_address(rec, addr), true);
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -160,12 +173,29 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
+	unsigned long aaddr = adjust_address(rec, addr);
 	unsigned long ip = rec->ip;
 	unsigned long old;
 	unsigned long new;
 	int ret;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+#ifdef CONFIG_ARM_MODULE_PLTS
+	/* mod is only supplied during module loading */
+	if (!mod)
+		mod = rec->arch.mod;
+	else
+		rec->arch.mod = mod;
+#endif
+
+	old = ftrace_call_replace(ip, aaddr,
+				  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!old && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		old = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
+
 	new = ftrace_nop_replace(rec);
 	ret = ftrace_modify_code(ip, old, new, true);
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/head.S linux-libre-5.4.261-gnu1/arch/arm/kernel/head.S
index c49b39340ddb..5ceed4d9ee03 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/head.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/head.S
@@ -274,11 +274,10 @@ __create_page_tables:
 	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
-	movs	r0, r0, lsl #SECTION_SHIFT
-	subne	r3, r0, r8
-	addne	r3, r3, #PAGE_OFFSET
-	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
-	orrne	r6, r7, r0
+	cmp	r2, #0
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	addne	r3, r3, r4
+	orrne	r6, r7, r0, lsl #SECTION_SHIFT
 	strne	r6, [r3], #1 << PMD_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
@@ -671,12 +670,8 @@ ARM_BE8(rev16	ip, ip)
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
 	bx	lr
-#else
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	moveq	r0, #0x00004000	@ set bit 22, mov to mvn instruction
 #else
 	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
-#endif
 	b	2f
 1:	ldr	ip, [r7, r3]
 #ifdef CONFIG_CPU_ENDIAN_BE8
@@ -685,7 +680,7 @@ ARM_BE8(rev16	ip, ip)
 	tst	ip, #0x000f0000	@ check the rotation field
 	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
 	biceq	ip, ip, #0x00004000 @ clear bit 22
-	orreq	ip, ip, r0      @ mask in offset bits 7-0
+	orreq	ip, ip, r0, ror #8  @ mask in offset bits 7-0
 #else
 	bic	ip, ip, #0x000000ff
 	tst	ip, #0xf00	@ check the rotation field
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/hw_breakpoint.c linux-libre-5.4.261-gnu1/arch/arm/kernel/hw_breakpoint.c
index b0c195e3a06d..a69dd64a8401 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/hw_breakpoint.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/hw_breakpoint.c
@@ -623,7 +623,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
 	hw->address &= ~alignment_mask;
 	hw->ctrl.len <<= offset;
 
-	if (is_default_overflow_handler(bp)) {
+	if (uses_default_overflow_handler(bp)) {
 		/*
 		 * Mismatch breakpoints are required for single-stepping
 		 * breakpoints.
@@ -680,26 +680,68 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+/*
+ * Arm32 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelyhood that a given access triggered the watchpoint.
+ *
+ * See this same function in the arm64 platform code, which has the same
+ * problem.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u32 get_distance_from_watchpoint(unsigned long addr, u32 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u32 wp_low, wp_high;
+	u32 lens, lene;
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
+static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
+				       struct arch_hw_breakpoint *info)
+{
+	return !user_mode(regs) && info->ctrl.privilege == ARM_BREAKPOINT_USER;
+}
+
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
+	int i, access, closest_match = 0;
+	u32 min_dist = -1, dist;
+	u32 val, ctrl_reg;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
 
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
 	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
 		wp = slots[i];
-
 		if (wp == NULL)
-			goto unlock;
+			continue;
 
-		info = counter_arch_bp(wp);
 		/*
 		 * The DFAR is an unknown value on debug architectures prior
 		 * to 7.1. Since we only allow a single watchpoint on these
@@ -708,50 +750,69 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 */
 		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
 			BUG_ON(i > 0);
+			info = counter_arch_bp(wp);
 			info->trigger = wp->attr.bp_addr;
 		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
 			/* Check that the access type matches. */
 			if (debug_exception_updates_fsr()) {
 				access = (fsr & ARM_FSR_ACCESS_MASK) ?
 					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
 				if (!(access & hw_breakpoint_type(wp)))
-					goto unlock;
+					continue;
 			}
 
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			dist = get_distance_from_watchpoint(addr, val, &ctrl);
+			if (dist < min_dist) {
+				min_dist = dist;
+				closest_match = i;
+			}
+			/* Is this an exact match? */
+			if (dist != 0)
+				continue;
+
 			/* We have a winner. */
+			info = counter_arch_bp(wp);
 			info->trigger = addr;
 		}
 
 		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+
+		/*
+		 * If we triggered a user watchpoint from a uaccess routine,
+		 * then handle the stepping ourselves since userspace really
+		 * can't help us with this.
+		 */
+		if (watchpoint_fault_on_uaccess(regs, info))
+			goto step;
+
 		perf_bp_event(wp, regs);
 
 		/*
-		 * If no overflow handler is present, insert a temporary
-		 * mismatch breakpoint so we can single-step over the
-		 * watchpoint trigger.
+		 * Defer stepping to the overflow handler if one is installed.
+		 * Otherwise, insert a temporary mismatch breakpoint so that
+		 * we can single-step over the watchpoint trigger.
 		 */
-		if (is_default_overflow_handler(wp))
-			enable_single_step(wp, instruction_pointer(regs));
+		if (!uses_default_overflow_handler(wp))
+			continue;
+step:
+		enable_single_step(wp, instruction_pointer(regs));
+	}
 
-unlock:
-		rcu_read_unlock();
+	if (min_dist > 0 && min_dist != -1) {
+		/* No exact match found. */
+		wp = slots[closest_match];
+		info = counter_arch_bp(wp);
+		info->trigger = addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(wp, regs);
+		if (uses_default_overflow_handler(wp))
+			enable_single_step(wp, instruction_pointer(regs));
 	}
+
+	rcu_read_unlock();
 }
 
 static void watchpoint_single_step_handler(unsigned long pc)
@@ -822,7 +883,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 			info->trigger = addr;
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
-			if (!bp->overflow_handler)
+			if (uses_default_overflow_handler(bp))
 				enable_single_step(bp, addr);
 			goto unlock;
 		}
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/hyp-stub.S linux-libre-5.4.261-gnu1/arch/arm/kernel/hyp-stub.S
index ae5020302de4..6607fa817bba 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/hyp-stub.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/hyp-stub.S
@@ -146,10 +146,9 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
-	lsr	r7, #16
-	and	r7, #0xf
-	cmp	r7, #1
-	bne	1f
+	ubfx	r7, r7, #16, #4
+	teq	r7, #0
+	beq	1f
 	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
 	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
 	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/insn.c linux-libre-5.4.261-gnu1/arch/arm/kernel/insn.c
index 2e844b70386b..db0acbb7d7a0 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/insn.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/insn.c
@@ -3,8 +3,9 @@
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_thumb2(unsigned long pc,
+					     unsigned long addr, bool link,
+					     bool warn)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -12,7 +13,7 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 4);
 	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -33,8 +34,8 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 	return __opcode_thumb32_compose(first, second);
 }
 
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_arm(unsigned long pc, unsigned long addr,
+					  bool link, bool warn)
 {
 	unsigned long opcode = 0xea000000;
 	long offset;
@@ -44,7 +45,7 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -54,10 +55,10 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn)
 {
 	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
+		return __arm_gen_branch_thumb2(pc, addr, link, warn);
 	else
-		return __arm_gen_branch_arm(pc, addr, link);
+		return __arm_gen_branch_arm(pc, addr, link, warn);
 }
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/iwmmxt.S linux-libre-5.4.261-gnu1/arch/arm/kernel/iwmmxt.S
index 0dcae787b004..d2b4ac06e4ed 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/iwmmxt.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/iwmmxt.S
@@ -16,6 +16,7 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
+#include "iwmmxt.h"
 
 #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 #define PJ4(code...)		code
@@ -113,33 +114,33 @@ concan_save:
 
 concan_dump:
 
-	wstrw	wCSSF, [r1, #MMX_WCSSF]
-	wstrw	wCASF, [r1, #MMX_WCASF]
-	wstrw	wCGR0, [r1, #MMX_WCGR0]
-	wstrw	wCGR1, [r1, #MMX_WCGR1]
-	wstrw	wCGR2, [r1, #MMX_WCGR2]
-	wstrw	wCGR3, [r1, #MMX_WCGR3]
+	wstrw	wCSSF, r1, MMX_WCSSF
+	wstrw	wCASF, r1, MMX_WCASF
+	wstrw	wCGR0, r1, MMX_WCGR0
+	wstrw	wCGR1, r1, MMX_WCGR1
+	wstrw	wCGR2, r1, MMX_WCGR2
+	wstrw	wCGR3, r1, MMX_WCGR3
 
 1:	@ MUP? wRn
 	tst	r2, #0x2
 	beq	2f
 
-	wstrd	wR0,  [r1, #MMX_WR0]
-	wstrd	wR1,  [r1, #MMX_WR1]
-	wstrd	wR2,  [r1, #MMX_WR2]
-	wstrd	wR3,  [r1, #MMX_WR3]
-	wstrd	wR4,  [r1, #MMX_WR4]
-	wstrd	wR5,  [r1, #MMX_WR5]
-	wstrd	wR6,  [r1, #MMX_WR6]
-	wstrd	wR7,  [r1, #MMX_WR7]
-	wstrd	wR8,  [r1, #MMX_WR8]
-	wstrd	wR9,  [r1, #MMX_WR9]
-	wstrd	wR10, [r1, #MMX_WR10]
-	wstrd	wR11, [r1, #MMX_WR11]
-	wstrd	wR12, [r1, #MMX_WR12]
-	wstrd	wR13, [r1, #MMX_WR13]
-	wstrd	wR14, [r1, #MMX_WR14]
-	wstrd	wR15, [r1, #MMX_WR15]
+	wstrd	wR0,  r1, MMX_WR0
+	wstrd	wR1,  r1, MMX_WR1
+	wstrd	wR2,  r1, MMX_WR2
+	wstrd	wR3,  r1, MMX_WR3
+	wstrd	wR4,  r1, MMX_WR4
+	wstrd	wR5,  r1, MMX_WR5
+	wstrd	wR6,  r1, MMX_WR6
+	wstrd	wR7,  r1, MMX_WR7
+	wstrd	wR8,  r1, MMX_WR8
+	wstrd	wR9,  r1, MMX_WR9
+	wstrd	wR10, r1, MMX_WR10
+	wstrd	wR11, r1, MMX_WR11
+	wstrd	wR12, r1, MMX_WR12
+	wstrd	wR13, r1, MMX_WR13
+	wstrd	wR14, r1, MMX_WR14
+	wstrd	wR15, r1, MMX_WR15
 
 2:	teq	r0, #0				@ anything to load?
 	reteq	lr				@ if not, return
@@ -147,30 +148,30 @@ concan_dump:
 concan_load:
 
 	@ Load wRn
-	wldrd	wR0,  [r0, #MMX_WR0]
-	wldrd	wR1,  [r0, #MMX_WR1]
-	wldrd	wR2,  [r0, #MMX_WR2]
-	wldrd	wR3,  [r0, #MMX_WR3]
-	wldrd	wR4,  [r0, #MMX_WR4]
-	wldrd	wR5,  [r0, #MMX_WR5]
-	wldrd	wR6,  [r0, #MMX_WR6]
-	wldrd	wR7,  [r0, #MMX_WR7]
-	wldrd	wR8,  [r0, #MMX_WR8]
-	wldrd	wR9,  [r0, #MMX_WR9]
-	wldrd	wR10, [r0, #MMX_WR10]
-	wldrd	wR11, [r0, #MMX_WR11]
-	wldrd	wR12, [r0, #MMX_WR12]
-	wldrd	wR13, [r0, #MMX_WR13]
-	wldrd	wR14, [r0, #MMX_WR14]
-	wldrd	wR15, [r0, #MMX_WR15]
+	wldrd	wR0,  r0, MMX_WR0
+	wldrd	wR1,  r0, MMX_WR1
+	wldrd	wR2,  r0, MMX_WR2
+	wldrd	wR3,  r0, MMX_WR3
+	wldrd	wR4,  r0, MMX_WR4
+	wldrd	wR5,  r0, MMX_WR5
+	wldrd	wR6,  r0, MMX_WR6
+	wldrd	wR7,  r0, MMX_WR7
+	wldrd	wR8,  r0, MMX_WR8
+	wldrd	wR9,  r0, MMX_WR9
+	wldrd	wR10, r0, MMX_WR10
+	wldrd	wR11, r0, MMX_WR11
+	wldrd	wR12, r0, MMX_WR12
+	wldrd	wR13, r0, MMX_WR13
+	wldrd	wR14, r0, MMX_WR14
+	wldrd	wR15, r0, MMX_WR15
 
 	@ Load wCx
-	wldrw	wCSSF, [r0, #MMX_WCSSF]
-	wldrw	wCASF, [r0, #MMX_WCASF]
-	wldrw	wCGR0, [r0, #MMX_WCGR0]
-	wldrw	wCGR1, [r0, #MMX_WCGR1]
-	wldrw	wCGR2, [r0, #MMX_WCGR2]
-	wldrw	wCGR3, [r0, #MMX_WCGR3]
+	wldrw	wCSSF, r0, MMX_WCSSF
+	wldrw	wCASF, r0, MMX_WCASF
+	wldrw	wCGR0, r0, MMX_WCGR0
+	wldrw	wCGR1, r0, MMX_WCGR1
+	wldrw	wCGR2, r0, MMX_WCGR2
+	wldrw	wCGR3, r0, MMX_WCGR3
 
 	@ clear CUP/MUP (only if r1 != 0)
 	teq	r1, #0
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/iwmmxt.h linux-libre-5.4.261-gnu1/arch/arm/kernel/iwmmxt.h
new file mode 100644
index 000000000000..fb627286f5bb
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/iwmmxt.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __IWMMXT_H__
+#define __IWMMXT_H__
+
+.irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+.set .LwR\b, \b
+.set .Lr\b, \b
+.endr
+
+.set .LwCSSF, 0x2
+.set .LwCASF, 0x3
+.set .LwCGR0, 0x8
+.set .LwCGR1, 0x9
+.set .LwCGR2, 0xa
+.set .LwCGR3, 0xb
+
+.macro wldrd, reg:req, base:req, offset:req
+.inst 0xedd00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wldrw, reg:req, base:req, offset:req
+.inst 0xfd900100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrd, reg:req, base:req, offset:req
+.inst 0xedc00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrw, reg:req, base:req, offset:req
+.inst 0xfd800100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+#ifdef __clang__
+
+#define wCon c1
+
+.macro tmrc, dest:req, control:req
+mrc p1, 0, \dest, \control, c0, 0
+.endm
+
+.macro tmcr, control:req, src:req
+mcr p1, 0, \src, \control, c0, 0
+.endm
+#endif
+
+#endif
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/kgdb.c linux-libre-5.4.261-gnu1/arch/arm/kernel/kgdb.c
index 6a95b9296640..183a6f2f165a 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/kgdb.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/machine_kexec.c linux-libre-5.4.261-gnu1/arch/arm/kernel/machine_kexec.c
index 76300f3813e8..734adeb42df8 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/machine_kexec.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/machine_kexec.c
@@ -15,6 +15,7 @@
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
@@ -24,11 +25,6 @@
 extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
 static atomic_t waiting_for_crash_ipi;
 
 /*
@@ -161,6 +157,7 @@ void (*kexec_reinit)(void);
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
+	struct kexec_relocate_data *data;
 	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
@@ -176,18 +173,17 @@ void machine_kexec(struct kimage *image)
 
 	reboot_code_buffer = page_address(image->control_code_page);
 
-	/* Prepare parameters for reboot_code_buffer*/
-	set_kernel_text_rw();
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->arch.kernel_r2;
-
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
 			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
 
+	data = reboot_code_buffer + relocate_new_kernel_size;
+	data->kexec_start_address = image->start;
+	data->kexec_indirection_page = page_list;
+	data->kexec_mach_type = machine_arch_type;
+	data->kexec_r2 = image->arch.kernel_r2;
+
 	/* get the identity mapping physical address for the reboot code */
 	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/module-plts.c linux-libre-5.4.261-gnu1/arch/arm/kernel/module-plts.c
index b647741c0ab0..d1c2d3bd55b6 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/module-plts.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/module-plts.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sort.h>
@@ -11,10 +12,6 @@
 #include <asm/cache.h>
 #include <asm/opcodes.h>
 
-#define PLT_ENT_STRIDE		L1_CACHE_BYTES
-#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
-#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define PLT_ENT_LDR		__opcode_to_mem_thumb32(0xf8dff000 | \
 							(PLT_ENT_STRIDE - 4))
@@ -23,9 +20,11 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
-struct plt_entries {
-	u32	ldr[PLT_ENT_COUNT];
-	u32	lit[PLT_ENT_COUNT];
+static const u32 fixed_plts[] = {
+#ifdef CONFIG_DYNAMIC_FTRACE
+	FTRACE_ADDR,
+	MCOUNT_ADDR,
+#endif
 };
 
 static bool in_init(const struct module *mod, unsigned long loc)
@@ -33,14 +32,40 @@ static bool in_init(const struct module *mod, unsigned long loc)
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
+{
+	int i;
+
+	if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count)
+		return;
+	pltsec->plt_count = ARRAY_SIZE(fixed_plts);
+
+	for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i)
+		plt->ldr[i] = PLT_ENT_LDR;
+
+	BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit));
+	memcpy(plt->lit, fixed_plts, sizeof(fixed_plts));
+}
+
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
 	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
 							  &mod->arch.init;
+	struct plt_entries *plt;
+	int idx;
+
+	/* cache the address, ELF header is available only during module load */
+	if (!pltsec->plt_ent)
+		pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr;
+	plt = pltsec->plt_ent;
 
-	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
-	int idx = 0;
+	prealloc_fixed(pltsec, plt);
+
+	for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx)
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
 
+	idx = 0;
 	/*
 	 * Look for an existing entry pointing to 'val'. Given that the
 	 * relocations are sorted, this will be the last entry we allocated.
@@ -188,8 +213,8 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0;
-	unsigned long init_plts = 0;
+	unsigned long core_plts = ARRAY_SIZE(fixed_plts);
+	unsigned long init_plts = ARRAY_SIZE(fixed_plts);
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -244,6 +269,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.core.plt_count = 0;
+	mod->arch.core.plt_ent = NULL;
 
 	mod->arch.init.plt->sh_type = SHT_NOBITS;
 	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
@@ -251,6 +277,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.init.plt_count = 0;
+	mod->arch.init.plt_ent = NULL;
 
 	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/perf_callchain.c linux-libre-5.4.261-gnu1/arch/arm/kernel/perf_callchain.c
index 3b69a76d341e..1626dfc6f6ce 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/perf_callchain.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/perf_callchain.c
@@ -62,9 +62,10 @@ user_backtrace(struct frame_tail __user *tail,
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct frame_tail __user *tail;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -98,9 +99,10 @@ callchain_trace(struct stackframe *fr,
 void
 perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe fr;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -111,18 +113,21 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest())
+		return guest_cbs->get_guest_ip();
 
 	return instruction_pointer(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
+	if (guest_cbs && guest_cbs->is_in_guest()) {
+		if (guest_cbs->is_user_mode())
 			misc |= PERF_RECORD_MISC_GUEST_USER;
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/perf_event_v7.c linux-libre-5.4.261-gnu1/arch/arm/kernel/perf_event_v7.c
index 2924d7910b10..eb2190477da1 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/perf_event_v7.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/perf_event_v7.c
@@ -773,10 +773,10 @@ static inline void armv7pmu_write_counter(struct perf_event *event, u64 value)
 		pr_err("CPU%u writing wrong counter %d\n",
 			smp_processor_id(), idx);
 	} else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" ((u32)value));
 	} else {
 		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" ((u32)value));
 	}
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/process.c linux-libre-5.4.261-gnu1/arch/arm/kernel/process.c
index 9485acc520a4..e7fac125ea0d 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/process.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/process.c
@@ -224,8 +224,8 @@ void release_thread(struct task_struct *dead_task)
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p)
+copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
+	    unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
@@ -259,7 +259,7 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	clear_ptrace_hw_breakpoint(p);
 
 	if (clone_flags & CLONE_SETTLS)
-		thread->tp_value[0] = childregs->ARM_r3;
+		thread->tp_value[0] = tls;
 	thread->tp_value[1] = get_tpuser();
 
 	thread_notify(THREAD_NOTIFY_COPY, thread);
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/ptrace.c linux-libre-5.4.261-gnu1/arch/arm/kernel/ptrace.c
index 324352787aea..db9401581cd2 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/ptrace.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/ptrace.c
@@ -219,8 +219,8 @@ static struct undef_hook arm_break_hook = {
 };
 
 static struct undef_hook thumb_break_hook = {
-	.instr_mask	= 0xffff,
-	.instr_val	= 0xde01,
+	.instr_mask	= 0xffffffff,
+	.instr_val	= 0x0000de01,
 	.cpsr_mask	= PSR_T_BIT,
 	.cpsr_val	= PSR_T_BIT,
 	.fn		= break_trap,
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/relocate_kernel.S linux-libre-5.4.261-gnu1/arch/arm/kernel/relocate_kernel.S
index 7eaa2ae7aff5..5e15b5912cb0 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/relocate_kernel.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/relocate_kernel.S
@@ -5,14 +5,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 #include <asm/kexec.h>
 
 	.align	3	/* not needed for this code, but keeps fncpy() happy */
 
 ENTRY(relocate_new_kernel)
 
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
+	adr	r7, relocate_new_kernel_end
+	ldr	r0, [r7, #KEXEC_INDIR_PAGE]
+	ldr	r1, [r7, #KEXEC_START_ADDR]
 
 	/*
 	 * If there is no indirection page (we are doing crashdumps)
@@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel)
 
 2:
 	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	ret lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
+	mov	lr, r1
+	mov	r0, #0
+	ldr	r1, [r7, #KEXEC_MACH_TYPE]
+	ldr	r2, [r7, #KEXEC_R2]
+ ARM(	ret	lr	)
+ THUMB(	bx	lr	)
 
 ENDPROC(relocate_new_kernel)
 
+	.align	3
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/return_address.c linux-libre-5.4.261-gnu1/arch/arm/kernel/return_address.c
index b0d2f1fe891d..7b42ac010fdf 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/return_address.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/return_address.c
@@ -7,8 +7,6 @@
  */
 #include <linux/export.h>
 #include <linux/ftrace.h>
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 #include <linux/sched.h>
 
 #include <asm/stacktrace.h>
@@ -53,6 +51,4 @@ void *return_address(unsigned int level)
 		return NULL;
 }
 
-#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
-
 EXPORT_SYMBOL_GPL(return_address);
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/setup.c linux-libre-5.4.261-gnu1/arch/arm/kernel/setup.c
index d0a464e317ea..43d6a6085d86 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/setup.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
+#include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -543,9 +544,11 @@ void notrace cpu_init(void)
 	 * In Thumb-2, msr with an immediate value is not allowed.
 	 */
 #ifdef CONFIG_THUMB2_KERNEL
-#define PLC	"r"
+#define PLC_l	"l"
+#define PLC_r	"r"
 #else
-#define PLC	"I"
+#define PLC_l	"I"
+#define PLC_r	"I"
 #endif
 
 	/*
@@ -567,15 +570,15 @@ void notrace cpu_init(void)
 	"msr	cpsr_c, %9"
 	    :
 	    : "r" (stk),
-	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
 	      "I" (offsetof(struct stack, fiq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC_l (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 #endif
 }
@@ -1075,19 +1078,27 @@ void __init hyp_mode_check(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-	const struct machine_desc *mdesc;
+	const struct machine_desc *mdesc = NULL;
+	void *atags_vaddr = NULL;
+
+	if (__atags_pointer)
+		atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
 
 	setup_processor();
-	mdesc = setup_machine_fdt(__atags_pointer);
+	if (atags_vaddr) {
+		mdesc = setup_machine_fdt(atags_vaddr);
+		if (mdesc)
+			memblock_reserve(__atags_pointer,
+					 fdt_totalsize(atags_vaddr));
+	}
 	if (!mdesc)
-		mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+		mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
 	if (!mdesc) {
 		early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
 		early_print("  r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
 			    __atags_pointer);
 		if (__atags_pointer)
-			early_print("  r2[]=%*ph\n", 16,
-				    phys_to_virt(__atags_pointer));
+			early_print("  r2[]=%*ph\n", 16, atags_vaddr);
 		dump_machine_table();
 	}
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/signal.c linux-libre-5.4.261-gnu1/arch/arm/kernel/signal.c
index ab2568996ddb..c01f76cd0242 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/signal.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/signal.c
@@ -694,18 +694,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/smccc-call.S linux-libre-5.4.261-gnu1/arch/arm/kernel/smccc-call.S
index 00664c78faca..931df62a7831 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/smccc-call.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/smccc-call.S
@@ -3,7 +3,9 @@
  * Copyright (c) 2015, Linaro Limited
  */
 #include <linux/linkage.h>
+#include <linux/arm-smccc.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
@@ -27,7 +29,14 @@ UNWIND(	.fnstart)
 UNWIND(	.save	{r4-r7})
 	ldm	r12, {r4-r7}
 	\instr
-	pop	{r4-r7}
+	ldr	r4, [sp, #36]
+	cmp	r4, #0
+	beq	1f			// No quirk structure
+	ldr     r5, [r4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp     r5, #ARM_SMCCC_QUIRK_QCOM_A6
+	bne	1f			// No quirk present
+	str	r6, [r4, #ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	pop	{r4-r7}
 	ldr	r12, [sp, #(4 * 4)]
 	stm	r12, {r0-r3}
 	bx	lr
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/smp.c linux-libre-5.4.261-gnu1/arch/arm/kernel/smp.c
index 4b0bab2607e4..46e1be9e57a8 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/smp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/smp.c
@@ -240,6 +240,10 @@ int __cpu_disable(void)
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_GENERIC_ARCH_TOPOLOGY
+	remove_cpu_topology(cpu);
+#endif
+
 	/*
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/spectre.c linux-libre-5.4.261-gnu1/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/stacktrace.c linux-libre-5.4.261-gnu1/arch/arm/kernel/stacktrace.c
index 71778bb0475b..824774999825 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/stacktrace.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/stacktrace.c
@@ -22,6 +22,19 @@
  * A simple function epilogue looks like this:
  *	ldm	sp, {fp, sp, pc}
  *
+ * When compiled with clang, pc and sp are not pushed. A simple function
+ * prologue looks like this when built with clang:
+ *
+ *	stmdb	{..., fp, lr}
+ *	add	fp, sp, #x
+ *	sub	sp, sp, #y
+ *
+ * A simple function epilogue looks like this when built with clang:
+ *
+ *	sub	sp, fp, #x
+ *	ldm	{..., fp, pc}
+ *
+ *
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
@@ -34,14 +47,24 @@ int notrace unwind_frame(struct stackframe *frame)
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
+#ifdef CONFIG_CC_IS_CLANG
+	/* check current frame pointer is within bounds */
+	if (fp < low + 4 || fp > high - 4)
+		return -EINVAL;
+
+	frame->sp = frame->fp;
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
+#else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
+#endif
 
 	return 0;
 }
@@ -92,6 +115,8 @@ static int save_trace(struct stackframe *frame, void *d)
 		return 0;
 
 	regs = (struct pt_regs *)frame->sp;
+	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+		return 0;
 
 	trace->entries[trace->nr_entries++] = regs->ARM_pc;
 
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/suspend.c linux-libre-5.4.261-gnu1/arch/arm/kernel/suspend.c
index d08099269e35..e126386fb78a 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/suspend.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/suspend.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/ftrace.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mm_types.h>
@@ -26,6 +27,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	if (!idmap_pgd)
 		return -EINVAL;
 
+	/*
+	 * Function graph tracer state gets incosistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
 	/*
 	 * Provide a temporary page table with an identity mapping for
 	 * the MMU-enable code, required for resuming.  On successful
@@ -33,6 +41,9 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 * back to the correct page tables.
 	 */
 	ret = __cpu_suspend(arg, fn, __mpidr);
+
+	unpause_graph_tracing();
+
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -46,7 +57,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	u32 __mpidr = cpu_logical_map(smp_processor_id());
-	return __cpu_suspend(arg, fn, __mpidr);
+	int ret;
+
+	pause_graph_tracing();
+	ret = __cpu_suspend(arg, fn, __mpidr);
+	unpause_graph_tracing();
+
+	return ret;
 }
 #define	idmap_pgd	NULL
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/topology.c linux-libre-5.4.261-gnu1/arch/arm/kernel/topology.c
index 5b9faba03afb..8d2e61d9e7a6 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/topology.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/topology.c
@@ -196,9 +196,8 @@ void store_cpu_topology(unsigned int cpuid)
 	struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
 	unsigned int mpidr;
 
-	/* If the cpu topology has been already set, just return */
-	if (cpuid_topo->core_id != -1)
-		return;
+	if (cpuid_topo->package_id != -1)
+		goto topology_populated;
 
 	mpidr = read_cpuid_mpidr();
 
@@ -231,14 +230,15 @@ void store_cpu_topology(unsigned int cpuid)
 		cpuid_topo->package_id = -1;
 	}
 
-	update_siblings_masks(cpuid);
-
 	update_cpu_capacity(cpuid);
 
 	pr_info("CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
 		cpuid, cpu_topology[cpuid].thread_id,
 		cpu_topology[cpuid].core_id,
 		cpu_topology[cpuid].package_id, mpidr);
+
+topology_populated:
+	update_siblings_masks(cpuid);
 }
 
 static inline int cpu_corepower_flags(void)
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/traps.c linux-libre-5.4.261-gnu1/arch/arm/kernel/traps.c
index c053abd1fb53..03dfeb120843 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/traps.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
@@ -64,14 +65,16 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
+	unsigned long end = frame + 4 + sizeof(struct pt_regs);
+
 #ifdef CONFIG_KALLSYMS
 	printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
-	if (in_entry_text(from))
-		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+	if (in_entry_text(from) && end <= ALIGN(frame, THREAD_SIZE))
+		dump_mem("", "Exception stack", frame + 4, end);
 }
 
 void dump_backtrace_stm(u32 *stack, u32 instruction)
@@ -338,7 +341,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	if (panic_on_oops)
 		panic("Fatal exception");
 	if (signr)
-		do_exit(signr);
+		make_task_dead(signr);
 }
 
 /*
@@ -797,10 +800,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state > SYSTEM_SCHEDULING) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -821,17 +873,20 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
-#endif
 }
+#endif
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/unwind.c linux-libre-5.4.261-gnu1/arch/arm/kernel/unwind.c
index 4574e6aea0a5..f321c2aa94e1 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/unwind.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/unwind.c
@@ -300,6 +300,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -353,7 +376,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/vdso.c linux-libre-5.4.261-gnu1/arch/arm/kernel/vdso.c
index 9bf16c93ee6a..6c69a5548ba2 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/vdso.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/vdso.c
@@ -92,6 +92,8 @@ static bool __init cntvct_functional(void)
 	 * this.
 	 */
 	np = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "arm,armv8-timer");
 	if (!np)
 		goto out_put;
 
@@ -279,7 +281,7 @@ static bool tk_is_cntvct(const struct timekeeper *tk)
 	if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
 		return false;
 
-	if (!tk->tkr_mono.clock->archdata.vdso_direct)
+	if (tk->tkr_mono.clock->archdata.clock_mode != VDSO_CLOCKMODE_ARCHTIMER)
 		return false;
 
 	return true;
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/vmlinux-xip.lds.S linux-libre-5.4.261-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
index 8c74037ade22..b1f366df620b 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
@@ -180,7 +180,7 @@ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker
diff --git linux-libre-5.4-gnu1/arch/arm/kernel/vmlinux.lds.h linux-libre-5.4.261-gnu1/arch/arm/kernel/vmlinux.lds.h
index 8247bc15addc..78d156e4f008 100644
--- linux-libre-5.4-gnu1/arch/arm/kernel/vmlinux.lds.h
+++ linux-libre-5.4.261-gnu1/arch/arm/kernel/vmlinux.lds.h
@@ -25,6 +25,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -100,19 +113,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git linux-libre-5.4-gnu1/arch/arm/kvm/hyp/tlb.c linux-libre-5.4.261-gnu1/arch/arm/kvm/hyp/tlb.c
index 848f27bbad9d..80e67108d39d 100644
--- linux-libre-5.4-gnu1/arch/arm/kvm/hyp/tlb.c
+++ linux-libre-5.4.261-gnu1/arch/arm/kvm/hyp/tlb.c
@@ -45,7 +45,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	__kvm_tlb_flush_vmid(kvm);
 }
 
-void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
+void __hyp_text __kvm_flush_cpu_context(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
 
@@ -54,6 +54,7 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
 	isb();
 
 	write_sysreg(0, TLBIALL);
+	write_sysreg(0, ICIALLU);
 	dsb(nsh);
 	isb();
 
diff --git linux-libre-5.4-gnu1/arch/arm/lib/copy_from_user.S linux-libre-5.4.261-gnu1/arch/arm/lib/copy_from_user.S
index 95b2e1ce559c..f8016e3db65d 100644
--- linux-libre-5.4-gnu1/arch/arm/lib/copy_from_user.S
+++ linux-libre-5.4.261-gnu1/arch/arm/lib/copy_from_user.S
@@ -118,7 +118,7 @@ ENTRY(arm_copy_from_user)
 
 ENDPROC(arm_copy_from_user)
 
-	.pushsection .fixup,"ax"
+	.pushsection .text.fixup,"ax"
 	.align 0
 	copy_abort_preamble
 	ldmfd	sp!, {r1, r2, r3}
diff --git linux-libre-5.4-gnu1/arch/arm/lib/findbit.S linux-libre-5.4.261-gnu1/arch/arm/lib/findbit.S
index b5e8b9ae4c7d..7fd3600db8ef 100644
--- linux-libre-5.4-gnu1/arch/arm/lib/findbit.S
+++ linux-libre-5.4.261-gnu1/arch/arm/lib/findbit.S
@@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_zero_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be)
 ENDPROC(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
@@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be)
 ENDPROC(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
diff --git linux-libre-5.4-gnu1/arch/arm/lib/memset.S linux-libre-5.4.261-gnu1/arch/arm/lib/memset.S
index 6ca4535c47fb..e36d053a8a90 100644
--- linux-libre-5.4-gnu1/arch/arm/lib/memset.S
+++ linux-libre-5.4.261-gnu1/arch/arm/lib/memset.S
@@ -16,6 +16,7 @@
 ENTRY(mmioset)
 ENTRY(memset)
 UNWIND( .fnstart         )
+	and	r1, r1, #255		@ cast to unsigned char
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
 	bne	6f			@ 1
diff --git linux-libre-5.4-gnu1/arch/arm/lib/xor-neon.c linux-libre-5.4.261-gnu1/arch/arm/lib/xor-neon.c
index b99dd8e1c93f..7ba6cf826162 100644
--- linux-libre-5.4-gnu1/arch/arm/lib/xor-neon.c
+++ linux-libre-5.4.261-gnu1/arch/arm/lib/xor-neon.c
@@ -26,8 +26,9 @@ MODULE_LICENSE("GPL");
  * While older versions of GCC do not generate incorrect code, they fail to
  * recognize the parallel nature of these functions, and emit plain ARM code,
  * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
+ *
+ * #warning This code requires at least version 4.6 of GCC
  */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"
diff --git linux-libre-5.4-gnu1/arch/arm/mach-at91/pm.c linux-libre-5.4.261-gnu1/arch/arm/mach-at91/pm.c
index d5af6aedc02c..5d75ab82d5a6 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-at91/pm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-at91/pm.c
@@ -103,7 +103,7 @@ static const struct wakeup_source_info ws_info[] = {
 
 static const struct of_device_id sama5d2_ws_ids[] = {
 	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
-	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d2-rtc",		.data = &ws_info[1] },
 	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
@@ -114,12 +114,12 @@ static const struct of_device_id sama5d2_ws_ids[] = {
 };
 
 static const struct of_device_id sam9x60_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sam9x60-rtc",	.data = &ws_info[1] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sam9x60-rtt",	.data = &ws_info[4] },
 	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
 	{ /* sentinel */ }
 };
@@ -592,13 +592,13 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
@@ -606,12 +606,17 @@ static void __init at91_pm_sram_init(void)
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static bool __init at91_is_pm_mode_active(int pm_mode)
@@ -691,6 +696,12 @@ static void __init at91_pm_use_default_mode(int pm_mode)
 		soc_pm.data.suspend_mode = AT91_PM_ULP0;
 }
 
+static const struct of_device_id atmel_shdwc_ids[] = {
+	{ .compatible = "atmel,sama5d2-shdwc" },
+	{ .compatible = "microchip,sam9x60-shdwc" },
+	{ /* sentinel. */ }
+};
+
 static void __init at91_pm_modes_init(void)
 {
 	struct device_node *np;
@@ -700,7 +711,7 @@ static void __init at91_pm_modes_init(void)
 	    !at91_is_pm_mode_active(AT91_PM_ULP1))
 		return;
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
+	np = of_find_matching_node(NULL, atmel_shdwc_ids);
 	if (!np) {
 		pr_warn("%s: failed to find shdwc!\n", __func__);
 		goto ulp1_default;
@@ -751,6 +762,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
 	{ /* sentinel */ },
 };
 
@@ -765,6 +777,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
 	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	of_node_put(pmc_np);
 	if (!soc_pm.data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-at91/pm_suspend.S linux-libre-5.4.261-gnu1/arch/arm/mach-at91/pm_suspend.S
index ed57c879d4e1..2591cba61937 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-at91/pm_suspend.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-at91/pm_suspend.S
@@ -268,6 +268,10 @@ ENDPROC(at91_backup_mode)
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+	/* Quirk for SAM9X60's PMC */
+	nop
+	nop
+
 	wait_mckrdy
 
 	/* Enable the crystal oscillator */
diff --git linux-libre-5.4-gnu1/arch/arm/mach-axxia/platsmp.c linux-libre-5.4.261-gnu1/arch/arm/mach-axxia/platsmp.c
index 512943eae30a..2e203626eda5 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-axxia/platsmp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;
 
 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-bcm/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-bcm/Kconfig
index 5e5f1fabc3d4..634d1bc3c011 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-bcm/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-bcm/Kconfig
@@ -214,7 +214,6 @@ config ARCH_BRCMSTB
 	select HAVE_ARM_ARCH_TIMER
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ZONE_DMA if ARM_LPAE
 	select SOC_BRCMSTB
 	select SOC_BUS
diff --git linux-libre-5.4-gnu1/arch/arm/mach-bcm/bcm_kona_smc.c linux-libre-5.4.261-gnu1/arch/arm/mach-bcm/bcm_kona_smc.c
index 541e850a736c..9175c130967e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-bcm/bcm_kona_smc.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -54,6 +54,7 @@ int __init bcm_kona_smc_init(void)
 		return -ENODEV;
 
 	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	of_node_put(node);
 	if (!prop_val)
 		return -EINVAL;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-cns3xxx/core.c linux-libre-5.4.261-gnu1/arch/arm/mach-cns3xxx/core.c
index 1d61a7701c11..d7e63f57b426 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-cns3xxx/core.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-cns3xxx/core.c
@@ -376,6 +376,7 @@ static void __init cns3xxx_init(void)
 		/* De-Asscer SATA Reset */
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
 	}
+	of_node_put(dn);
 
 	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
 	if (of_device_is_available(dn)) {
@@ -389,6 +390,7 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
+	of_node_put(dn);
 
 	pm_power_off = cns3xxx_power_off;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-davinci/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-davinci/Kconfig
index dd427bd2768c..4d3b7d0418c4 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-davinci/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-davinci/Kconfig
@@ -5,10 +5,10 @@ menuconfig ARCH_DAVINCI
 	depends on ARCH_MULTI_V5
 	select DAVINCI_TIMER
 	select ZONE_DMA
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
+	select RESET_CONTROLLER
 	select HAVE_IDE
 	select PINCTRL_SINGLE
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-davinci/board-da850-evm.c linux-libre-5.4.261-gnu1/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..b2ede9bf82df 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-davinci/board-da850-evm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-davinci/board-da850-evm.c
@@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
 	int ret;
 	u32 val;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+	u8 rmii_en;
 
 	if (!machine_is_davinci_da850_evm())
 		return 0;
 
+	rmii_en = soc_info->emac_pdata->rmii_en;
+
 	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 
 	val = __raw_readl(cfg_chip3_base);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-ep93xx/timer-ep93xx.c linux-libre-5.4.261-gnu1/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..b07956883e16 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <asm/mach/time.h>
 #include "soc.h"
+#include "platform.h"
 
 /*************************************************************************
  * Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
 	return ret;
 }
 
-u64 ep93xx_clocksource_read(struct clocksource *c)
+static u64 ep93xx_clocksource_read(struct clocksource *c)
 {
 	u64 ret;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-exynos/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/Kconfig
index 9dab1f50a02f..fc01137628e4 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-exynos/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/Kconfig
@@ -8,7 +8,6 @@
 menuconfig ARCH_EXYNOS
 	bool "Samsung EXYNOS"
 	depends on ARCH_MULTI_V7
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git linux-libre-5.4-gnu1/arch/arm/mach-exynos/exynos.c linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/exynos.c
index 9aa483366ebc..9025067ef6f5 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-exynos/exynos.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/exynos.c
@@ -46,6 +46,7 @@ void __init exynos_sysram_init(void)
 		sysram_base_addr = of_iomap(node, 0);
 		sysram_base_phys = of_translate_address(node,
 					   of_get_address(node, 0, NULL, NULL));
+		of_node_put(node);
 		break;
 	}
 
@@ -53,6 +54,7 @@ void __init exynos_sysram_init(void)
 		if (!of_device_is_available(node))
 			continue;
 		sysram_ns_base_addr = of_iomap(node, 0);
+		of_node_put(node);
 		break;
 	}
 }
@@ -134,6 +136,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }
 
 static void __init exynos_init_irq(void)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-exynos/mcpm-exynos.c linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/mcpm-exynos.c
index 9a681b421ae1..cd861c57d5ad 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-exynos/mcpm-exynos.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,7 @@
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
 static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
@@ -58,15 +59,16 @@ static void __iomem *ns_sram_base_addr __ro_after_init;
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	if (!exynos_cpu_power_state(cpunr)) {
-		exynos_cpu_power_up(cpunr);
-
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
 		/*
 		 * This assumes the cluster number of the big cores(Cortex A15)
 		 * is 0 and the Little cores(Cortex A7) is 1.
@@ -258,6 +260,8 @@ static int __init exynos_mcpm_init(void)
 		return -ENOMEM;
 	}
 
+	secure_firmware = exynos_secure_firmware_available();
+
 	/*
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register
diff --git linux-libre-5.4-gnu1/arch/arm/mach-footbridge/cats-pci.c linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/cats-pci.c
index 0b2fd7e2e9b4..90b1e9be430e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-footbridge/cats-pci.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/cats-pci.c
@@ -15,14 +15,14 @@
 #include <asm/mach-types.h>
 
 /* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
+static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	return 0;
 }
 
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
 		return -1;	/* not a valid interrupt. */
diff --git linux-libre-5.4-gnu1/arch/arm/mach-footbridge/dc21285.c linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/dc21285.c
index 8b81a17f675d..e17ec92b90dd 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-footbridge/dc21285.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/dc21285.c
@@ -66,15 +66,15 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("ldrb	%0, [%1, %2]"
+			asm volatile("ldrb	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 2:
-			asm("ldrh	%0, [%1, %2]"
+			asm volatile("ldrh	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 4:
-			asm("ldr	%0, [%1, %2]"
+			asm volatile("ldr	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		}
@@ -100,17 +100,17 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("strb	%0, [%1, %2]"
+			asm volatile("strb	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 2:
-			asm("strh	%0, [%1, %2]"
+			asm volatile("strh	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 4:
-			asm("str	%0, [%1, %2]"
+			asm volatile("str	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79..c3f280d08fa7 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -14,9 +14,9 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
+static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
 
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-footbridge/netwinder-pci.c linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5..e8304392074b 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
@@ -18,7 +18,7 @@
  * We now use the slot ID instead of the device identifiers to select
  * which interrupt is routed where.
  */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 0:  /* host bridge */
diff --git linux-libre-5.4-gnu1/arch/arm/mach-footbridge/personal-pci.c linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/personal-pci.c
index 4391e433a4b2..9d19aa98a663 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-footbridge/personal-pci.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-footbridge/personal-pci.c
@@ -14,13 +14,12 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_personal_server[] __initdata = {
+static int irqmap_personal_server[] = {
 	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
 	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
 };
 
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
+static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char line;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-highbank/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-highbank/Kconfig
index 1bc68913d62c..9de38ce8124f 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-highbank/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
 	depends on ARCH_MULTI_V7
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
diff --git linux-libre-5.4-gnu1/arch/arm/mach-hisi/platsmp.c linux-libre-5.4.261-gnu1/arch/arm/mach-hisi/platsmp.c
index da7a09c1dae5..1cd1d9b0aabf 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-hisi/platsmp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-hisi/platsmp.c
@@ -67,14 +67,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
 		}
 		ctrl_base = of_iomap(np, 0);
 		if (!ctrl_base) {
+			of_node_put(np);
 			pr_err("failed to map address\n");
 			return;
 		}
 		if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+			of_node_put(np);
 			pr_err("failed to find smp-offset property\n");
 			return;
 		}
 		ctrl_base += offset;
+		of_node_put(np);
 	}
 }
 
@@ -160,6 +163,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (WARN_ON(!node))
 		return -1;
 	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
 
 	/* set the secondary core boot from DDR */
 	remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-imx/Kconfig
index 593bf1519608..95584ee02b55 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/Kconfig
@@ -520,6 +520,7 @@ config SOC_IMX6UL
 	bool "i.MX6 UltraLite support"
 	select PINCTRL_IMX6UL
 	select SOC_IMX6
+	select ARM_ERRATA_814220
 
 	help
 	  This enables support for Freescale i.MX6 UltraLite processor.
@@ -556,6 +557,7 @@ config SOC_IMX7D
 	select PINCTRL_IMX7D
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
+	select ARM_ERRATA_814220 if ARCH_MULTI_V7
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/Makefile linux-libre-5.4.261-gnu1/arch/arm/mach-imx/Makefile
index 35ff620537e6..e7364e6c8c6b 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/Makefile
@@ -91,6 +91,10 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
+AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/common.h linux-libre-5.4.261-gnu1/arch/arm/mach-imx/common.h
index 912aeceb4ff8..5aa5796cff0e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/common.h
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/common.h
@@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_SUSPEND
-void v7_cpu_resume(void);
 void imx53_suspend(void __iomem *ocram_vbase);
 extern const u32 imx53_suspend_sz;
 void imx6_suspend(void __iomem *ocram_vbase);
 #else
-static inline void v7_cpu_resume(void) {}
 static inline void imx53_suspend(void __iomem *ocram_vbase) {}
 static const u32 imx53_suspend_sz;
 static inline void imx6_suspend(void __iomem *ocram_vbase) {}
 #endif
 
+void v7_cpu_resume(void);
+
 void imx6_pm_ccm_init(const char *ccm_compat);
 void imx6q_pm_init(void);
 void imx6dl_pm_init(void);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx25.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx25.c
index b2e1963f473d..2ee2d2813d57 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx25.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx27.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx27.c
index a969aa71b60f..1d2893908368 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx27.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx27.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/of_address.h>
 #include <linux/module.h>
 
 #include "hardware.h"
@@ -17,16 +18,24 @@ static int mx27_cpu_rev = -1;
 static int mx27_cpu_partnumber;
 
 #define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+#define SYSCTRL_OFFSET		0x800	/* Offset from CCM base address */
 
 static int mx27_read_cpu_rev(void)
 {
+	void __iomem *ccm_base;
+	struct device_node *np;
 	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
+	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
+	val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
 
 	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx31.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx31.c
index 3ee684b71006..35c544924e50 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx31.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx31.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/of_address.h>
 #include <linux/io.h>
 
 #include "common.h"
@@ -32,10 +33,17 @@ static struct {
 
 static int mx31_read_cpu_rev(void)
 {
+	void __iomem *iim_base;
+	struct device_node *np;
 	u32 i, srev;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
+	iim_base = of_iomap(np, 0);
+	of_node_put(np);
+	BUG_ON(!iim_base);
+
 	/* read SREV register from IIM module */
-	srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev = imx_readl(iim_base + MXC_IIMSREV);
 	srev &= 0xff;
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx35.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx35.c
index ebb3cdabd506..1fe75b39c2d9 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx35.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx35.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
  */
 #include <linux/module.h>
+#include <linux/of_address.h>
 #include <linux/io.h>
 
 #include "hardware.h"
@@ -14,9 +15,16 @@ static int mx35_cpu_rev = -1;
 
 static int mx35_read_cpu_rev(void)
 {
+	void __iomem *iim_base;
+	struct device_node *np;
 	u32 rev;
 
-	rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
+	iim_base = of_iomap(np, 0);
+	of_node_put(np);
+	BUG_ON(!iim_base);
+
+	rev = imx_readl(iim_base + MXC_IIMSREV);
 	switch (rev) {
 	case 0x00:
 		return IMX_CHIP_REVISION_1_0;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx5.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/cpu-imx5.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/mmdc.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/mmdc.c
index 0dfd0ae7a63d..b9efe9da06e0 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/mmdc.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/mmdc.c
@@ -99,10 +99,12 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
 	struct fsl_mmdc_devtype_data *devtype_data;
+	struct clk *mmdc_ipg_clk;
 };
 
 /*
@@ -432,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -451,26 +451,29 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
 static int imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
+	iounmap(pmu_mmdc->mmdc_base);
+	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
 	return 0;
 }
 
-static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
+			      struct clk *mmdc_ipg_clk)
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -493,13 +496,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
+
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
 
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -520,6 +524,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
@@ -529,7 +534,7 @@ pmu_free:
 
 #else
 #define imx_mmdc_remove NULL
-#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0
 #endif
 
 static int imx_mmdc_probe(struct platform_device *pdev)
@@ -567,7 +572,13 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	return imx_mmdc_perf_init(pdev, mmdc_base);
+	err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk);
+	if (err) {
+		iounmap(mmdc_base);
+		clk_disable_unprepare(mmdc_ipg_clk);
+	}
+
+	return err;
 }
 
 int imx_mmdc_get_ddr_type(void)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/pm-imx5.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/pm-imx5.c
index f057df813f83..e9962b48e30c 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/pm-imx5.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/pm-imx5.c
@@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, size);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
 	if (virt_out)
 		*virt_out = virt;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/pm-imx6.c linux-libre-5.4.261-gnu1/arch/arm/mach-imx/pm-imx6.c
index 1c0ecad3620e..1b73e4e76310 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/pm-imx6.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/pm-imx6.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
@@ -493,14 +494,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -523,7 +524,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
 	if (ret) {
 		pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
-		goto put_node;
+		goto put_device;
 	}
 
 	ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
@@ -570,7 +571,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		&imx6_suspend,
 		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
 
-	goto put_node;
+	goto put_device;
 
 pl310_cache_map_failed:
 	iounmap(pm_info->gpc_base.vbase);
@@ -580,6 +581,8 @@ iomuxc_map_failed:
 	iounmap(pm_info->src_base.vbase);
 src_map_failed:
 	iounmap(pm_info->mmdc_base.vbase);
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 
@@ -616,6 +619,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 
 static void imx6_pm_stby_poweroff(void)
 {
+	gic_cpu_if_down(0);
 	imx6_set_lpm(STOP_POWER_OFF);
 	imx6q_suspend_finish(0);
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/resume-imx6.S linux-libre-5.4.261-gnu1/arch/arm/mach-imx/resume-imx6.S
new file mode 100644
index 000000000000..5bd1ba7ef15b
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/resume-imx6.S
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "hardware.h"
+
+/*
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
+ */
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+#ifdef CONFIG_CACHE_L2X0
+	bl	l2c310_early_resume
+#endif
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/suspend-imx53.S linux-libre-5.4.261-gnu1/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/suspend-imx53.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
diff --git linux-libre-5.4-gnu1/arch/arm/mach-imx/suspend-imx6.S linux-libre-5.4.261-gnu1/arch/arm/mach-imx/suspend-imx6.S
index 062391ff13da..e06f946b75b9 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-imx/suspend-imx6.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-imx/suspend-imx6.S
@@ -67,6 +67,7 @@
 #define MX6Q_CCM_CCR	0x0
 
 	.align 3
+	.arm
 
 	.macro  sync_l2_cache
 
@@ -327,17 +328,3 @@ resume:
 
 	ret	lr
 ENDPROC(imx6_suspend)
-
-/*
- * The following code must assume it is running from physical address
- * where absolute virtual addresses to the data section have to be
- * turned into relative ones.
- */
-
-ENTRY(v7_cpu_resume)
-	bl	v7_invalidate_l1
-#ifdef CONFIG_CACHE_L2X0
-	bl	l2c310_early_resume
-#endif
-	b	cpu_resume
-ENDPROC(v7_cpu_resume)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-integrator/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-integrator/Kconfig
index 982eabc36163..2406cab73835 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-integrator/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-integrator/Kconfig
@@ -4,6 +4,8 @@ menuconfig ARCH_INTEGRATOR
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_AMBA
 	select COMMON_CLK_VERSATILE
+	select CMA
+	select DMA_CMA
 	select HAVE_TCM
 	select ICST
 	select MFD_SYSCON
@@ -35,14 +37,13 @@ config INTEGRATOR_IMPD1
 	select ARM_VIC
 	select GPIO_PL061
 	select GPIOLIB
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
 	  The IM-PD1 can be found on the Integrator/PP2 platform.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called impd1.
-
 config INTEGRATOR_CM7TDMI
 	bool "Integrator/CM7TDMI core module"
 	depends on ARCH_INTEGRATOR_AP
diff --git linux-libre-5.4-gnu1/arch/arm/mach-iop32x/include/mach/entry-macro.S linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/include/mach/entry-macro.S
index 8e6766d4621e..341e5d9a6616 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
 	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
 	cmp     \irqstat, #0
 	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
+	rsbne   \irqnr, \irqnr, #32
 	.endm
 
 	.macro arch_ret_to_user, tmp1, tmp2
diff --git linux-libre-5.4-gnu1/arch/arm/mach-iop32x/include/mach/irqs.h linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/include/mach/irqs.h
index c4e78df428e8..e09ae5f48aec 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-iop32x/include/mach/irqs.h
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
 #ifndef __IRQS_H
 #define __IRQS_H
 
-#define NR_IRQS			32
+#define NR_IRQS			33
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/mach-iop32x/irq.c linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/irq.c
index 2d48bf1398c1..d1e8824cbd82 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-iop32x/irq.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/irq.c
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
diff --git linux-libre-5.4-gnu1/arch/arm/mach-iop32x/irqs.h linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/irqs.h
index 69858e4e905d..e1dfc8b4e7d7 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-iop32x/irqs.h
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm/mach-ixp4xx/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-ixp4xx/Kconfig
index f7211b57b1e7..165c184801e1 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-ixp4xx/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-ixp4xx/Kconfig
@@ -13,7 +13,6 @@ config MACH_IXP4XX_OF
 	select I2C
 	select I2C_IOP3XX
 	select PCI
-	select TIMER_OF
 	select USE_OF
 	help
 	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
diff --git linux-libre-5.4-gnu1/arch/arm/mach-keystone/keystone.c linux-libre-5.4.261-gnu1/arch/arm/mach-keystone/keystone.c
index 638808c4e122..697adedaced4 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-keystone/keystone.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-keystone/keystone.c
@@ -62,7 +62,7 @@ static void __init keystone_init(void)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();
@@ -75,7 +75,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-mediatek/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-mediatek/Kconfig
index 9e0f592d87d8..35a3430c7942 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-mediatek/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-mediatek/Kconfig
@@ -30,6 +30,7 @@ config MACH_MT7623
 config MACH_MT7629
 	bool "MediaTek MT7629 SoCs support"
 	default ARCH_MEDIATEK
+	select HAVE_ARM_ARCH_TIMER
 
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
diff --git linux-libre-5.4-gnu1/arch/arm/mach-meson/platsmp.c linux-libre-5.4.261-gnu1/arch/arm/mach-meson/platsmp.c
index 4b8ad728bb42..32ac60b89fdc 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-meson/platsmp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-meson/platsmp.c
@@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	sram_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!sram_base) {
 		pr_err("Couldn't map SRAM registers\n");
 		return;
@@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	scu_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!scu_base) {
 		pr_err("Couldn't map SCU registers\n");
 		return;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-mmp/sram.c linux-libre-5.4.261-gnu1/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-mmp/sram.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-mmp/time.c linux-libre-5.4.261-gnu1/arch/arm/mach-mmp/time.c
index 483df32583be..0bdb872f5018 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-mmp/time.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-mmp/time.c
@@ -44,18 +44,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-mxs/mach-mxs.c linux-libre-5.4.261-gnu1/arch/arm/mach-mxs/mach-mxs.c
index c109f47e9cbc..a687e83ad604 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-mxs/mach-mxs.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-mxs/mach-mxs.c
@@ -387,8 +387,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
diff --git linux-libre-5.4-gnu1/arch/arm/mach-npcm/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-npcm/Kconfig
index 880bc2a5cada..7f7002dc2b21 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-npcm/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-npcm/Kconfig
@@ -11,7 +11,7 @@ config ARCH_NPCM7XX
 	depends on ARCH_MULTI_V7
 	select PINCTRL_NPCM7XX
 	select NPCM7XX_TIMER
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select CACHE_L2X0
 	select ARM_GIC
 	select HAVE_ARM_TWD if SMP
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 14a6c3eb3298..f745a65d3bd7 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,6 +15,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
+#include <asm/irq.h>
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/clock.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/clock.c
index bd5be82101f3..d89bda12bf3c 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/clock.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/clock.c
@@ -41,7 +41,7 @@ static DEFINE_SPINLOCK(clockfw_lock);
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
+	return val & 1 << clk->enable_bit ? 48000000 : 12000000;
 }
 
 unsigned long omap1_sossi_recalc(struct clk *clk)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/pm.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/pm.c
index d068958d6f8a..2c1e2b32b9b3 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/pm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.handler	= omap_wakeup_interrupt
-};
-
 
 
 static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 static int __init omap_pm_init(void)
 {
 	int error = 0;
+	int irq;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
 	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+		irq = INT_1610_WAKE_UP_REQ;
+	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+			NULL))
+		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/time.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/time.c
index 524977a31a49..de590a85a42b 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/time.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/timer.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/timer.c
index 4447210c9b0d..291bc376d30e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/timer.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/timer.c
@@ -165,7 +165,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap1/timer32k.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/timer32k.c
index 0ae6c52a7d70..780fdf03c3ce 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap1/timer32k.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
 static __init void omap_init_32k_timer(void)
 {
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+	if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+		pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
 
 	clockevent_32k_timer.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&clockevent_32k_timer,
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/Kconfig
index fdb6743760a2..0211f4aa8cc7 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/Kconfig
@@ -94,7 +94,7 @@ config SOC_DRA7XX
 config ARCH_OMAP2PLUS
 	bool
 	select ARCH_HAS_BANDGAP
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/board-generic.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/board-generic.c
index ff992f8895ee..ad512f07d568 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/board-generic.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/board-generic.c
@@ -327,7 +327,7 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap5_realtime_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= dra74x_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
@@ -350,7 +350,7 @@ DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap5_realtime_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= dra72x_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/board-n8x0.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827..5e86145db0e2 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/board-n8x0.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/board-n8x0.c
@@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/cpuidle34xx.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/cpuidle34xx.c
index 532a3e4b98c6..090a8aafb25e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/cpuidle34xx.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/cpuidle34xx.c
@@ -109,6 +109,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 			    int index)
 {
 	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
+	int error;
 
 	if (omap_irq_pending() || need_resched())
 		goto return_sleep_time;
@@ -125,8 +126,11 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP context is saved.
 	 */
-	if (cx->mpu_state == PWRDM_POWER_OFF)
-		cpu_pm_enter();
+	if (cx->mpu_state == PWRDM_POWER_OFF) {
+		error = cpu_pm_enter();
+		if (error)
+			goto out_clkdm_set;
+	}
 
 	/* Execute ARM wfi */
 	omap_sram_idle();
@@ -139,6 +143,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	    pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
 		cpu_pm_exit();
 
+out_clkdm_set:
 	/* Re-allow idle for C1 */
 	if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE)
 		clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/cpuidle44xx.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
index fe75d4fa6073..de37027ad758 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
@@ -122,6 +122,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 {
 	struct idle_statedata *cx = state_ptr + index;
 	u32 mpuss_can_lose_context = 0;
+	int error;
 
 	/*
 	 * CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -150,27 +151,37 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	tick_broadcast_enable();
+	RCU_NONIDLE(tick_broadcast_enable());
 
 	/* Enter broadcast mode for one-shot timers */
-	tick_broadcast_enter();
+	RCU_NONIDLE(tick_broadcast_enter());
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
 	 */
-	cpu_pm_enter();
+	error = cpu_pm_enter();
+	if (error)
+		goto cpu_pm_out;
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
 		 * to save GIC and wakeupgen context.
 		 */
-		if (mpuss_can_lose_context)
-			cpu_cluster_pm_enter();
+		if (mpuss_can_lose_context) {
+			error = cpu_cluster_pm_enter();
+			if (error) {
+				index = 0;
+				cx = state_ptr + index;
+				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
+				mpuss_can_lose_context = 0;
+			}
+		}
 	}
 
 	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
@@ -183,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_deny_idle(cpu_clkdm[1]);
-		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu_clkdm[1]);
+		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -197,12 +208,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		}
 	}
 
-	/*
-	 * Call idle CPU PM exit notifier chain to restore
-	 * VFP and per CPU IRQ context.
-	 */
-	cpu_pm_exit();
-
 	/*
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
@@ -210,7 +215,14 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	if (dev->cpu == 0 && mpuss_can_lose_context)
 		cpu_cluster_pm_exit();
 
-	tick_broadcast_exit();
+	/*
+	 * Call idle CPU PM exit notifier chain to restore
+	 * VFP and per CPU IRQ context.
+	 */
+	cpu_pm_exit();
+
+cpu_pm_out:
+	RCU_NONIDLE(tick_broadcast_exit());
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/display.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/display.c
index 439e143cad7b..1de25166414e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/display.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/display.c
@@ -211,6 +211,7 @@ static int __init omapdss_init_fbdev(void)
 	node = of_find_node_by_name(NULL, "omap4_padconf_global");
 	if (node)
 		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+	of_node_put(node);
 
 	return 0;
 }
@@ -259,10 +260,13 @@ static int __init omapdss_init_of(void)
 
 	if (!pdev) {
 		pr_err("Unable to find DSS platform device\n");
+		of_node_put(node);
 		return -ENODEV;
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
+	of_node_put(node);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
 		return r;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap-iommu.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap-iommu.c
index f1a6ece8108e..78247e6f4a72 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap-iommu.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap-iommu.c
@@ -11,14 +11,43 @@
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include "clockdomain.h"
 #include "powerdomain.h"
 
+static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
+					     bool enable)
+{
+	static struct clockdomain *emu_clkdm;
+	static DEFINE_SPINLOCK(emu_lock);
+	static atomic_t count;
+	struct device_node *np = pdev->dev.of_node;
+
+	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
+		return;
+
+	if (!emu_clkdm) {
+		emu_clkdm = clkdm_lookup("emu_clkdm");
+		if (WARN_ON_ONCE(!emu_clkdm))
+			return;
+	}
+
+	spin_lock(&emu_lock);
+
+	if (enable && (atomic_inc_return(&count) == 1))
+		clkdm_deny_idle(emu_clkdm);
+	else if (!enable && (atomic_dec_return(&count) == 0))
+		clkdm_allow_idle(emu_clkdm);
+
+	spin_unlock(&emu_lock);
+}
+
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
 	struct omap_device *od;
 	u8 next_pwrst;
+	int ret = 0;
 
 	od = to_omap_device(pdev);
 	if (!od)
@@ -31,13 +60,21 @@ int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 	if (!pwrdm)
 		return -EINVAL;
 
-	if (request)
+	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
+		omap_iommu_dra7_emu_swsup_config(pdev, true);
+	}
 
 	if (*pwrst > PWRDM_POWER_RET)
-		return 0;
+		goto out;
 
 	next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
 
-	return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+	ret = pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+
+out:
+	if (!request)
+		omap_iommu_dra7_emu_swsup_config(pdev, false);
+
+	return ret;
 }
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap4-common.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap_device.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap_device.c
index 3acb4192918d..f85a0fd6aca5 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap_device.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap_device.c
@@ -234,10 +234,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 		break;
 	case BUS_NOTIFY_BIND_DRIVER:
 		od = to_omap_device(pdev);
-		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
-		    pm_runtime_status_suspended(dev)) {
+		if (od) {
 			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
-			pm_runtime_set_active(dev);
+			if (od->_state == OMAP_DEVICE_STATE_ENABLED &&
+			    pm_runtime_status_suspended(dev)) {
+				pm_runtime_set_active(dev);
+			}
 		}
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap_hwmod.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap_hwmod.c
index 203664c40d3d..202b740adee0 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/omap_hwmod.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/omap_hwmod.c
@@ -782,8 +782,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
@@ -3535,7 +3537,7 @@ static const struct omap_hwmod_reset dra7_reset_quirks[] = {
 };
 
 static const struct omap_hwmod_reset omap_reset_quirks[] = {
-	{ .match = "dss", .len = 3, .reset = omap_dss_reset, },
+	{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
 	{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
 	{ .match = "i2c", .len = 3, .reset = omap_i2c_reset, },
 	{ .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, },
@@ -3656,6 +3658,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/pdata-quirks.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/pdata-quirks.c
index 2efd18e8824c..ca07e310d9ed 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/pdata-quirks.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/pdata-quirks.c
@@ -7,7 +7,6 @@
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
 #include <linux/gpio.h>
-#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -45,6 +44,17 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -269,14 +279,6 @@ static void __init am3517_evm_legacy_init(void)
 	am35xx_emac_reset();
 }
 
-static struct platform_device omap3_rom_rng_device = {
-	.name		= "omap3-rom-rng",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= rx51_secure_rng_call,
-	},
-};
-
 static void __init nokia_n900_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
@@ -292,9 +294,6 @@ static void __init nokia_n900_legacy_init(void)
 			pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
 			pr_warn("Thumb binaries may crash randomly without this workaround\n");
 		}
-
-		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
-		platform_device_register(&omap3_rom_rng_device);
 	}
 }
 
@@ -311,131 +310,18 @@ static void __init omap3_logicpd_torpedo_init(void)
 }
 
 /* omap3pandora legacy devices */
-#define PANDORA_WIFI_IRQ_GPIO		21
-#define PANDORA_WIFI_NRESET_GPIO	23
 
 static struct platform_device pandora_backlight = {
 	.name	= "pandora-backlight",
 	.id	= -1,
 };
 
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_init_data pandora_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 1800000, /* 1.8V */
-	.startup_delay		= 50000, /* 50ms */
-	.init_data		= &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &pandora_vwlan,
-	},
-};
-
-static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1",
-	.table = {
-		/*
-		 * As this is a low GPIO number it should be at the first
-		 * GPIO bank.
-		 */
-		GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
-	/*
-	 * We have TI wl1251 attached to MMC3. Pass this information to
-	 * SDIO core because it can't be probed by normal methods.
-	 */
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-		card->cccr.wide_bus = 1;
-		card->cis.vendor = 0x104c;
-		card->cis.device = 0x9066;
-		card->cis.blksize = 512;
-		card->cis.max_dtr = 24000000;
-		card->ocr = 0x80;
-	}
-}
-
-static struct omap2_hsmmc_info pandora_mmc3[] = {
-	{
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.init_card	= pandora_wl1251_init_card,
-	},
-	{}	/* Terminator */
-};
-
-static void __init pandora_wl1251_init(void)
-{
-	struct wl1251_platform_data pandora_wl1251_pdata;
-	int ret;
-
-	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
-	pandora_wl1251_pdata.power_gpio = -1;
-
-	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
-	if (ret < 0)
-		goto fail;
-
-	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
-	if (pandora_wl1251_pdata.irq < 0)
-		goto fail_irq;
-
-	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
-	if (ret < 0)
-		goto fail_irq;
-
-	return;
-
-fail_irq:
-	gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
-	pr_err("wl1251 board initialisation failed\n");
-}
-
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
-	gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
-	platform_device_register(&pandora_vwlan_device);
-	omap_hsmmc_init(pandora_mmc3);
-	omap_hsmmc_late_init(pandora_mmc3);
-	pandora_wl1251_init();
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-static struct iommu_platform_data omap4_iommu_pdata = {
-	.reset_name = "mmu_cache",
-	.assert_reset = omap_device_assert_hardreset,
-	.deassert_reset = omap_device_deassert_hardreset,
-	.device_enable = omap_device_enable,
-	.device_idle = omap_device_idle,
-};
-#endif
-
 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 static struct wkup_m3_platform_data wkup_m3_data = {
 	.reset_name = "wkup_m3",
@@ -451,6 +337,10 @@ static void __init omap5_uevm_legacy_init(void)
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
+static struct iommu_platform_data dra7_ipu1_dsp_iommu_pdata = {
+	.set_pwrdm_constraint = omap_iommu_set_pwrdm_constraint,
+};
+
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
@@ -472,10 +362,14 @@ static void __init dra7x_evm_mmc_quirk(void)
 
 static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
 {
+	struct clk_hw *hw = __clk_get_hw(clk);
 	struct clockdomain *clkdm = NULL;
 	struct clk_hw_omap *hwclk;
 
-	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	hwclk = to_clk_hw_omap(hw);
+	if (!omap2_clk_is_hw_omap(hw))
+		return NULL;
+
 	if (hwclk && hwclk->clkdm_name)
 		clkdm = clkdm_lookup(hwclk->clkdm_name);
 
@@ -638,6 +532,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	OF_DEV_AUXDATA("nokia,n900-rom-rng", 0, NULL, rx51_secure_rng_call),
 	/* McBSP modules with sidetone core */
 #if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
 	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
@@ -653,10 +548,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
-		       &omap4_iommu_pdata),
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
-		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
 		       "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
@@ -671,6 +562,12 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &dra7_hsmmc_data_mmc2),
 	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
 		       &dra7_hsmmc_data_mmc3),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x40d01000, "40d01000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x41501000, "41501000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-iommu", 0x58882000, "58882000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
 #endif
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/pm34xx.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/pm34xx.c
index 54254fc92c2e..fa66534a7ae2 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/pm34xx.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/pm34xx.c
@@ -194,6 +194,7 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	u32 sdrc_pwr = 0;
+	int error;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
@@ -222,8 +223,11 @@ void omap_sram_idle(void)
 	pwrdm_pre_transition(NULL);
 
 	/* PER */
-	if (per_next_state == PWRDM_POWER_OFF)
-		cpu_cluster_pm_enter();
+	if (per_next_state == PWRDM_POWER_OFF) {
+		error = cpu_cluster_pm_enter();
+		if (error)
+			return;
+	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/powerdomain.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/powerdomain.c
index 1cbac76136d4..6a10d23d787e 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/powerdomain.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/powerdomain.c
@@ -174,7 +174,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 		break;
 	case PWRDM_STATE_PREV:
 		prev = pwrdm_read_prev_pwrst(pwrdm);
-		if (pwrdm->state != prev)
+		if (prev >= 0 && pwrdm->state != prev)
 			pwrdm->state_counter[prev]++;
 		if (prev == PWRDM_POWER_RET)
 			_update_logic_membank_counters(pwrdm);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/prm3xxx.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/prm3xxx.c
index 1b442b128569..63e73e9b82bc 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/prm3xxx.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/prm3xxx.c
@@ -708,6 +708,7 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	irq_num = of_irq_get(np, 0);
+	of_node_put(np);
 	if (irq_num == -EPROBE_DEFER)
 		return irq_num;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/sleep34xx.S linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/sleep34xx.S
index ac1324c6453b..c4e97d35c310 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/sleep34xx.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/sleep34xx.S
@@ -72,7 +72,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	adr	r3, l2dis_3630_offset
 	ldr	r2, [r3]		@ value for offset
 	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
diff --git linux-libre-5.4-gnu1/arch/arm/mach-omap2/timer.c linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/timer.c
index 07bea84c5d6e..a5da85b73461 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-omap2/timer.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-omap2/timer.c
@@ -42,6 +42,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 #include <linux/sched_clock.h>
+#include <linux/cpu.h>
 
 #include <asm/mach/time.h>
 
@@ -63,15 +64,28 @@
 
 /* Clockevent code */
 
-static struct omap_dm_timer clkev;
-static struct clock_event_device clockevent_gpt;
-
 /* Clockevent hwmod for am335x and am437x suspend */
 static struct omap_hwmod *clockevent_gpt_hwmod;
 
 /* Clockesource hwmod for am437x suspend */
 static struct omap_hwmod *clocksource_gpt_hwmod;
 
+struct dmtimer_clockevent {
+	struct clock_event_device dev;
+	struct omap_dm_timer timer;
+};
+
+static struct dmtimer_clockevent clockevent;
+
+static struct omap_dm_timer *to_dmtimer(struct clock_event_device *clockevent)
+{
+	struct dmtimer_clockevent *clkevt =
+		container_of(clockevent, struct dmtimer_clockevent, dev);
+	struct omap_dm_timer *timer = &clkevt->timer;
+
+	return timer;
+}
+
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 static unsigned long arch_timer_freq;
 
@@ -83,24 +97,21 @@ void set_cntfreq(void)
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &clockevent_gpt;
-
-	__omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
+	struct dmtimer_clockevent *clkevt = dev_id;
+	struct clock_event_device *evt = &clkevt->dev;
+	struct omap_dm_timer *timer = &clkevt->timer;
 
+	__omap_dm_timer_write_status(timer, OMAP_TIMER_INT_OVERFLOW);
 	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
 static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
-	__omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
+	struct omap_dm_timer *timer = to_dmtimer(evt);
+
+	__omap_dm_timer_load_start(timer, OMAP_TIMER_CTRL_ST,
 				   0xffffffff - cycles, OMAP_TIMER_POSTED);
 
 	return 0;
@@ -108,22 +119,26 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles,
 
 static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
 {
-	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
+	struct omap_dm_timer *timer = to_dmtimer(evt);
+
+	__omap_dm_timer_stop(timer, OMAP_TIMER_POSTED, timer->rate);
+
 	return 0;
 }
 
 static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
 {
+	struct omap_dm_timer *timer = to_dmtimer(evt);
 	u32 period;
 
-	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
+	__omap_dm_timer_stop(timer, OMAP_TIMER_POSTED, timer->rate);
 
-	period = clkev.rate / HZ;
+	period = timer->rate / HZ;
 	period -= 1;
 	/* Looks like we need to first set the load value separately */
-	__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
+	__omap_dm_timer_write(timer, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
 			      OMAP_TIMER_POSTED);
-	__omap_dm_timer_load_start(&clkev,
+	__omap_dm_timer_load_start(timer,
 				   OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
 				   0xffffffff - period, OMAP_TIMER_POSTED);
 	return 0;
@@ -137,25 +152,16 @@ static void omap_clkevt_idle(struct clock_event_device *unused)
 	omap_hwmod_idle(clockevent_gpt_hwmod);
 }
 
-static void omap_clkevt_unidle(struct clock_event_device *unused)
+static void omap_clkevt_unidle(struct clock_event_device *evt)
 {
+	struct omap_dm_timer *timer = to_dmtimer(evt);
+
 	if (!clockevent_gpt_hwmod)
 		return;
 
 	omap_hwmod_enable(clockevent_gpt_hwmod);
-	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-}
-
-static struct clock_event_device clockevent_gpt = {
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 300,
-	.set_next_event		= omap2_gp_timer_set_next_event,
-	.set_state_shutdown	= omap2_gp_timer_shutdown,
-	.set_state_periodic	= omap2_gp_timer_set_periodic,
-	.set_state_oneshot	= omap2_gp_timer_shutdown,
-	.tick_resume		= omap2_gp_timer_shutdown,
-};
+	__omap_dm_timer_int_enable(timer, OMAP_TIMER_INT_OVERFLOW);
+}
 
 static const struct of_device_id omap_timer_match[] __initconst = {
 	{ .compatible = "ti,omap2420-timer", },
@@ -362,47 +368,104 @@ void tick_broadcast(const struct cpumask *mask)
 }
 #endif
 
-static void __init omap2_gp_clockevent_init(int gptimer_id,
-						const char *fck_source,
-						const char *property)
+static void __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
+					      int gptimer_id,
+					      const char *fck_source,
+					      unsigned int features,
+					      const struct cpumask *cpumask,
+					      const char *property,
+					      int rating, const char *name)
 {
+	struct omap_dm_timer *timer = &clkevt->timer;
 	int res;
 
-	clkev.id = gptimer_id;
-	clkev.errata = omap_dm_timer_get_errata();
+	timer->id = gptimer_id;
+	timer->errata = omap_dm_timer_get_errata();
+	clkevt->dev.features = features;
+	clkevt->dev.rating = rating;
+	clkevt->dev.set_next_event = omap2_gp_timer_set_next_event;
+	clkevt->dev.set_state_shutdown = omap2_gp_timer_shutdown;
+	clkevt->dev.set_state_periodic = omap2_gp_timer_set_periodic;
+	clkevt->dev.set_state_oneshot = omap2_gp_timer_shutdown;
+	clkevt->dev.tick_resume = omap2_gp_timer_shutdown;
 
 	/*
 	 * For clock-event timers we never read the timer counter and
 	 * so we are not impacted by errata i103 and i767. Therefore,
 	 * we can safely ignore this errata for clock-event timers.
 	 */
-	__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
+	__omap_dm_timer_override_errata(timer, OMAP_TIMER_ERRATA_I103_I767);
 
-	res = omap_dm_timer_init_one(&clkev, fck_source, property,
-				     &clockevent_gpt.name, OMAP_TIMER_POSTED);
+	res = omap_dm_timer_init_one(timer, fck_source, property,
+				     &clkevt->dev.name, OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = &clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
+	clkevt->dev.cpumask = cpumask;
+	clkevt->dev.irq = omap_dm_timer_get_irq(timer);
 
-	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
+	if (request_irq(clkevt->dev.irq, omap2_gp_timer_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, name, clkevt))
+		pr_err("Failed to request irq %d (gp_timer)\n", clkevt->dev.irq);
 
-	clockevent_gpt.cpumask = cpu_possible_mask;
-	clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
-	clockevents_config_and_register(&clockevent_gpt, clkev.rate,
-					3, /* Timer internal resynch latency */
-					0xffffffff);
+	__omap_dm_timer_int_enable(timer, OMAP_TIMER_INT_OVERFLOW);
 
 	if (soc_is_am33xx() || soc_is_am43xx()) {
-		clockevent_gpt.suspend = omap_clkevt_idle;
-		clockevent_gpt.resume = omap_clkevt_unidle;
+		clkevt->dev.suspend = omap_clkevt_idle;
+		clkevt->dev.resume = omap_clkevt_unidle;
 
 		clockevent_gpt_hwmod =
-			omap_hwmod_lookup(clockevent_gpt.name);
+			omap_hwmod_lookup(clkevt->dev.name);
+	}
+
+	pr_info("OMAP clockevent source: %s at %lu Hz\n", clkevt->dev.name,
+		timer->rate);
+}
+
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int omap_gptimer_starting_cpu(unsigned int cpu)
+{
+	struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+	struct clock_event_device *dev = &clkevt->dev;
+	struct omap_dm_timer *timer = &clkevt->timer;
+
+	clockevents_config_and_register(dev, timer->rate, 3, ULONG_MAX);
+	irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+	return 0;
+}
+
+static int __init dmtimer_percpu_quirk_init(void)
+{
+	struct dmtimer_clockevent *clkevt;
+	struct clock_event_device *dev;
+	struct device_node *arm_timer;
+	struct omap_dm_timer *timer;
+	int cpu = 0;
+
+	arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+	if (of_device_is_available(arm_timer)) {
+		pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+		return 0;
+	}
+
+	for_each_possible_cpu(cpu) {
+		clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+		dev = &clkevt->dev;
+		timer = &clkevt->timer;
+
+		dmtimer_clkevt_init_common(clkevt, 0, "timer_sys_ck",
+					   CLOCK_EVT_FEAT_ONESHOT,
+					   cpumask_of(cpu),
+					   "assigned-clock-parents",
+					   500, "percpu timer");
 	}
 
-	pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
-		clkev.rate);
+	cpuhp_setup_state(CPUHP_AP_OMAP_DM_TIMER_STARTING,
+			  "clockevents/omap/gptimer:starting",
+			  omap_gptimer_starting_cpu, NULL);
+
+	return 0;
 }
 
 /* Clocksource code */
@@ -542,7 +605,15 @@ static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src
 {
 	omap_clk_init();
 	omap_dmtimer_init();
-	omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
+	dmtimer_clkevt_init_common(&clockevent, clkev_nr, clkev_src,
+				   CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+				   cpu_possible_mask, clkev_prop, 300, "clockevent");
+	clockevents_config_and_register(&clockevent.dev, clockevent.timer.rate,
+					3, /* Timer internal resynch latency */
+					0xffffffff);
+
+	if (soc_is_dra7xx())
+		dmtimer_percpu_quirk_init();
 
 	/* Enable the use of clocksource="gp_timer" kernel parameter */
 	if (use_gptimer_clksrc || gptimer)
@@ -571,7 +642,7 @@ void __init omap3_secure_sync32k_timer_init(void)
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
-	defined(CONFIG_SOC_AM43XX)
+	defined(CONFIG_SOC_AM43XX) || defined(CONFIG_SOC_DRA7XX)
 void __init omap3_gptimer_timer_init(void)
 {
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
@@ -629,6 +700,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git linux-libre-5.4-gnu1/arch/arm/mach-orion5x/board-dt.c linux-libre-5.4.261-gnu1/arch/arm/mach-orion5x/board-dt.c
index 3d36f1d95196..3f651df3a71c 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-orion5x/board-dt.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-orion5x/board-dt.c
@@ -63,6 +63,9 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
 	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-orion5x/common.h linux-libre-5.4.261-gnu1/arch/arm/mach-orion5x/common.h
index eb96009e21c4..b9cfdb456456 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-orion5x/common.h
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-orion5x/common.h
@@ -75,6 +75,12 @@ extern void mss2_init(void);
 static inline void mss2_init(void) {}
 #endif
 
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git linux-libre-5.4-gnu1/arch/arm/mach-pxa/cm-x300.c linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/cm-x300.c
index 425855f456f2..719e6395797c 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-pxa/cm-x300.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/cm-x300.c
@@ -355,13 +355,13 @@ static struct platform_device cm_x300_spi_gpio = {
 static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
 	.dev_id         = "spi_gpio",
 	.table          = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE,
 			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE,
 			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE,
 			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE,
 			    "cs", GPIO_ACTIVE_HIGH),
 		{ },
 	},
diff --git linux-libre-5.4-gnu1/arch/arm/mach-pxa/magician.c linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/magician.c
index e1a394ac3eea..8f2d4faa2612 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-pxa/magician.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/magician.c
@@ -675,7 +675,7 @@ static struct platform_device bq24022 = {
 static struct gpiod_lookup_table bq24022_gpiod_table = {
 	.dev_id = "gpio-regulator",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE,
 			    NULL, GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
 			    "enable", GPIO_ACTIVE_LOW),
diff --git linux-libre-5.4-gnu1/arch/arm/mach-pxa/sharpsl_pm.c linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/sharpsl_pm.c
index 83cfbb882a2d..7f6bd7f069e4 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-pxa/sharpsl_pm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/sharpsl_pm.c
@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void)
 {
 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 }
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
diff --git linux-libre-5.4-gnu1/arch/arm/mach-pxa/spitz.c linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/spitz.c
index a4fdc399d152..742c67301dee 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-pxa/spitz.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/spitz.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -514,17 +513,6 @@ static struct pxa2xx_spi_chip spitz_ads7846_chip = {
 	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.init_mode		= CORGI_LCD_MODE_VGA,
 	.max_intensity		= 0x2f,
@@ -532,7 +520,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.limit_mask		= 0x0b,
 	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
 	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
-	.kick_battery		= spitz_bl_kick_battery,
+	.kick_battery		= sharpsl_battery_kick,
 };
 
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
diff --git linux-libre-5.4-gnu1/arch/arm/mach-pxa/tosa.c linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/tosa.c
index f537ff1c3ba7..3fbcaa3b4e18 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-pxa/tosa.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-pxa/tosa.c
@@ -295,9 +295,9 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = {
 	.table = {
 		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
 			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE,
 			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE,
 			    "power", GPIO_ACTIVE_HIGH),
 		{ },
 	},
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-at2440evb.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..2d370f7f75fa 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -143,7 +143,7 @@ static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-h1940.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-h1940.c
index 74d6b68e91c7..8d9d8e7c71d4 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-h1940.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -468,9 +468,9 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-jive.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..eedc9f8ed210 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-jive.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-jive.c
@@ -237,11 +237,11 @@ static int __init jive_mtdset(char *options)
 	unsigned long set;
 
 	if (options == NULL || options[0] == '\0')
-		return 0;
+		return 1;
 
 	if (kstrtoul(options, 10, &set)) {
 		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
+		return 1;
 	}
 
 	switch (set) {
@@ -256,7 +256,7 @@ static int __init jive_mtdset(char *options)
 		       "using default.", set);
 	}
 
-	return 0;
+	return 1;
 }
 
 /* parse the mtdset= option given to the kernel command line */
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-mini2440.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..3a5b1124037b 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -244,9 +244,9 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(8) */
-		GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-n30.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-n30.c
index d856f23939af..ffa20f52aa83 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-n30.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-n30.c
@@ -359,9 +359,9 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(1) */
-		GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-rx1950.c linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-rx1950.c
index 29f9b345a531..534e9c1d8161 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -567,9 +567,9 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-s5pv210/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-s5pv210/Kconfig
index 03984a791879..69ff1bb89f38 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-s5pv210/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-s5pv210/Kconfig
@@ -8,7 +8,6 @@
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	depends on ARCH_MULTI_V7
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
diff --git linux-libre-5.4-gnu1/arch/arm/mach-sa1100/assabet.c linux-libre-5.4.261-gnu1/arch/arm/mach-sa1100/assabet.c
index d96a101e5504..2f305c7ce1cb 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-sa1100/assabet.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-sa1100/assabet.c
@@ -653,7 +653,7 @@ static void __init map_sa1100_gpio_regs( void )
  */
 static void __init get_assabet_scr(void)
 {
-	unsigned long uninitialized_var(scr), i;
+	unsigned long scr, i;
 
 	GPDR |= 0x3fc;			/* Configure GPIO 9:2 as outputs */
 	GPSR = 0x3fc;			/* Write 0xFF to GPIO 9:2 */
diff --git linux-libre-5.4-gnu1/arch/arm/mach-sa1100/jornada720_ssp.c linux-libre-5.4.261-gnu1/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..9627c4cf3e41 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-sa1100/jornada720_ssp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  *  arch/arm/mac-sa1100/jornada720_ssp.c
  *
  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
@@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags;
 
 /**
  * jornada_ssp_reverse - reverses input byte
+ * @byte: input byte to reverse
  *
  * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
@@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
 
 /**
  * jornada_ssp_byte - waits for ready ssp bus and sends byte
+ * @byte: input byte to transmit
  *
  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
  * timeout after <timeout> rounds. Needs mcu running before its called.
@@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
 
 /**
  * jornada_ssp_inout - decide if input is command or trading byte
+ * @byte: input byte to send (may be %TXDUMMY)
  *
  * returns : (jornada_ssp_byte(byte)) on success
  *         : %-ETIMEDOUT on timeout failure
diff --git linux-libre-5.4-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c linux-libre-5.4.261-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3..ba44cec5e59a 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -125,6 +125,7 @@ remove:
 
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
@@ -154,8 +155,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +167,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 
@@ -171,11 +175,12 @@ static int __init rcar_gen2_regulator_quirk(void)
 		memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
 
 		quirk->id = id;
-		quirk->np = np;
+		quirk->np = of_node_get(np);
 		quirk->i2c_msg.addr = addr;
 
 		ret = of_irq_parse_one(np, 0, argsa);
 		if (ret) {	/* Skip invalid entry and continue */
+			of_node_put(np);
 			kfree(quirk);
 			continue;
 		}
@@ -222,6 +227,7 @@ err_free:
 err_mem:
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-socfpga/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/Kconfig
index 22af5e308db6..61b872792c4c 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-socfpga/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -19,6 +20,7 @@ menuconfig ARCH_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git linux-libre-5.4-gnu1/arch/arm/mach-socfpga/core.h linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/core.h
index fc2608b18a0d..18f01190dcfd 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-socfpga/core.h
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/core.h
@@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-socfpga/platsmp.c linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/platsmp.c
index fbb80b883e5d..201191cf68f3 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-socfpga/platsmp.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/platsmp.c
@@ -20,14 +20,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
diff --git linux-libre-5.4-gnu1/arch/arm/mach-socfpga/pm.c linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/pm.c
index 6ed887cf8dc9..365c0428b21b 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-socfpga/pm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-socfpga/pm.c
@@ -49,14 +49,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -67,7 +67,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -81,6 +81,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 
diff --git linux-libre-5.4-gnu1/arch/arm/mach-sunxi/sunxi.c linux-libre-5.4.261-gnu1/arch/arm/mach-sunxi/sunxi.c
index 933b6930f024..a0ca5e7a68de 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-sunxi/sunxi.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-sunxi/sunxi.c
@@ -66,6 +66,7 @@ static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
 	"allwinner,sun8i-r40",
+	"allwinner,sun8i-v3",
 	"allwinner,sun8i-v3s",
 	NULL,
 };
diff --git linux-libre-5.4-gnu1/arch/arm/mach-tango/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mach-tango/Kconfig
index 25b2fd434861..a9eeda36aeb1 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-tango/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-tango/Kconfig
@@ -3,7 +3,6 @@ config ARCH_TANGO
 	bool "Sigma Designs Tango4 (SMP87xx)"
 	depends on ARCH_MULTI_V7
 	# Cortex-A9 MPCore r3p0, PL310 r3p2
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
diff --git linux-libre-5.4-gnu1/arch/arm/mach-tegra/reset-handler.S linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/reset-handler.S
index 67b763fea005..e3f34815c9da 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-tegra/reset-handler.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/reset-handler.S
@@ -44,16 +44,16 @@ ENTRY(tegra_resume)
 	cmp	r6, #TEGRA20
 	beq	1f				@ Yes
 	/* Clear the flow controller flags for this CPU. */
-	cpu_to_csr_reg r1, r0
+	cpu_to_csr_reg r3, r0
 	mov32	r2, TEGRA_FLOW_CTRL_BASE
-	ldr	r1, [r2, r1]
+	ldr	r1, [r2, r3]
 	/* Clear event & intr flag */
 	orr	r1, r1, \
 		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
 	movw	r0, #0x3FFD	@ enable, cluster_switch, immed, bitmaps
 				@ & ext flags for CPU power mgnt
 	bic	r1, r1, r0
-	str	r1, [r2]
+	str	r1, [r2, r3]
 1:
 
 	mov32	r9, 0xc09
diff --git linux-libre-5.4-gnu1/arch/arm/mach-tegra/sleep-tegra30.S linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/sleep-tegra30.S
index b408fa56eb89..6922dd8d3e2d 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-tegra/sleep-tegra30.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/sleep-tegra30.S
@@ -370,6 +370,14 @@ _pll_m_c_x_done:
 	pll_locked r1, r0, CLK_RESET_PLLC_BASE
 	pll_locked r1, r0, CLK_RESET_PLLX_BASE
 
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	beq	1f
+	ldr	r1, [r0, #CLK_RESET_PLLP_BASE]
+	bic	r1, r1, #(1<<31)	@ disable PllP bypass
+	str	r1, [r0, #CLK_RESET_PLLP_BASE]
+1:
+
 	mov32	r7, TEGRA_TMRUS_BASE
 	ldr	r1, [r7]
 	add	r1, r1, #LOCK_DELAY
@@ -630,7 +638,10 @@ tegra30_switch_cpu_to_clk32k:
 	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
 
 	/* disable PLLP, PLLA, PLLC and PLLX */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
 	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	orrne	r0, r0, #(1 << 31)	@ enable PllP bypass on fast cluster
 	bic	r0, r0, #(1 << 30)
 	str	r0, [r5, #CLK_RESET_PLLP_BASE]
 	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
diff --git linux-libre-5.4-gnu1/arch/arm/mach-tegra/tegra.c linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/tegra.c
index e512e606eabd..5ea3421fa1e8 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-tegra/tegra.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-tegra/tegra.c
@@ -106,8 +106,8 @@ static const char * const tegra_dt_board_compat[] = {
 };
 
 DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
-	.l2c_aux_val	= 0x3c400001,
-	.l2c_aux_mask	= 0xc20fc3fe,
+	.l2c_aux_val	= 0x3c400000,
+	.l2c_aux_mask	= 0xc20fc3ff,
 	.smp		= smp_ops(tegra_smp_ops),
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git linux-libre-5.4-gnu1/arch/arm/mach-vexpress/dcscb.c linux-libre-5.4.261-gnu1/arch/arm/mach-vexpress/dcscb.c
index 46a903c88c6a..f553cde614f9 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-vexpress/dcscb.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-vexpress/dcscb.c
@@ -143,6 +143,7 @@ static int __init dcscb_init(void)
 	if (!node)
 		return -ENODEV;
 	dcscb_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!dcscb_base)
 		return -EADDRNOTAVAIL;
 	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-vexpress/spc.c linux-libre-5.4.261-gnu1/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1c6500c4e6a1 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-vexpress/spc.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 static int __init ve_spc_clk_init(void)
 {
-	int cpu;
+	int cpu, cluster;
 	struct clk *clk;
+	bool init_opp_table[MAX_CLUSTERS] = { false };
 
 	if (!info)
 		return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
 			continue;
 		}
 
+		cluster = topology_physical_package_id(cpu_dev->id);
+		if (cluster < 0 || init_opp_table[cluster])
+			continue;
+
 		if (ve_init_opp_table(cpu_dev))
 			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+		else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+			 topology_core_cpumask(cpu_dev->id)))
+			pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+		else
+			init_opp_table[cluster] = true;
 	}
 
 	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
diff --git linux-libre-5.4-gnu1/arch/arm/mach-zynq/common.c linux-libre-5.4.261-gnu1/arch/arm/mach-zynq/common.c
index 3a4248fd7962..25530ddae1fa 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-zynq/common.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-zynq/common.c
@@ -77,6 +77,7 @@ static int __init zynq_get_revision(void)
 	}
 
 	zynq_devcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!zynq_devcfg_base) {
 		pr_err("%s: Unable to map I/O memory\n", __func__);
 		return -1;
diff --git linux-libre-5.4-gnu1/arch/arm/mach-zynq/slcr.c linux-libre-5.4.261-gnu1/arch/arm/mach-zynq/slcr.c
index 37707614885a..9765b3f4c2fc 100644
--- linux-libre-5.4-gnu1/arch/arm/mach-zynq/slcr.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mach-zynq/slcr.c
@@ -213,6 +213,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git linux-libre-5.4-gnu1/arch/arm/mm/Kconfig linux-libre-5.4.261-gnu1/arch/arm/mm/Kconfig
index 0ab3a86b1f52..00ffee644372 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/Kconfig
@@ -743,6 +743,7 @@ config SWP_EMULATE
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on ARCH_SUPPORTS_BIG_ENDIAN
+	depends on !LD_IS_LLD
 	help
 	  Say Y if you plan on running a kernel in big-endian mode.
 	  Note that your board must be properly built and your board
@@ -752,7 +753,7 @@ config CPU_BIG_ENDIAN
 config CPU_ENDIAN_BE8
 	bool
 	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
+	default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
 	help
 	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
 
@@ -832,6 +833,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -852,6 +854,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
diff --git linux-libre-5.4-gnu1/arch/arm/mm/alignment.c linux-libre-5.4.261-gnu1/arch/arm/mm/alignment.c
index 788c5cf46de5..52ff66f004e4 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/alignment.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/alignment.c
@@ -799,7 +799,7 @@ static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	union offset_union uninitialized_var(offset);
+	union offset_union offset;
 	unsigned long instrptr;
 	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/cache-l2x0.c linux-libre-5.4.261-gnu1/arch/arm/mm/cache-l2x0.c
index 12c26eb88afb..43d91bfd2360 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/cache-l2x0.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/cache-l2x0.c
@@ -1249,20 +1249,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}
diff --git linux-libre-5.4-gnu1/arch/arm/mm/dma-mapping-nommu.c linux-libre-5.4.261-gnu1/arch/arm/mm/dma-mapping-nommu.c
index db9247898300..287ef898a55e 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/dma-mapping-nommu.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/dma-mapping-nommu.c
@@ -35,7 +35,7 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size,
 				 unsigned long attrs)
 
 {
-	void *ret = dma_alloc_from_global_coherent(size, dma_handle);
+	void *ret = dma_alloc_from_global_coherent(dev, size, dma_handle);
 
 	/*
 	 * dma_alloc_from_global_coherent() may fail because:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/dma-mapping.c linux-libre-5.4.261-gnu1/arch/arm/mm/dma-mapping.c
index 7d042d5c43e3..fbfb9250e743 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/dma-mapping.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/dma-mapping.c
@@ -221,7 +221,7 @@ EXPORT_SYMBOL(arm_coherent_dma_ops);
 
 static int __dma_supported(struct device *dev, u64 mask, bool warn)
 {
-	unsigned long max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+	unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
 
 	/*
 	 * Translate the device's DMA mask to a PFN limit.  This
@@ -2332,15 +2332,15 @@ void arch_teardown_dma_ops(struct device *dev)
 }
 
 #ifdef CONFIG_SWIOTLB
-void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	__dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
 			      size, dir);
 }
 
-void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	__dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
 			      size, dir);
diff --git linux-libre-5.4-gnu1/arch/arm/mm/fault.c linux-libre-5.4.261-gnu1/arch/arm/mm/fault.c
index bd0f4821f7e1..d62393243720 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/fault.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/fault.c
@@ -124,7 +124,7 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	show_pte(KERN_ALERT, mm, addr);
 	die("Oops", regs, fsr);
 	bust_spinlocks(0);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 }
 
 /*
diff --git linux-libre-5.4-gnu1/arch/arm/mm/init.c linux-libre-5.4.261-gnu1/arch/arm/mm/init.c
index b4be3baa83d4..ff2cd985d20e 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/init.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/init.c
@@ -176,11 +176,22 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 int pfn_valid(unsigned long pfn)
 {
 	phys_addr_t addr = __pfn_to_phys(pfn);
+	unsigned long pageblock_size = PAGE_SIZE * pageblock_nr_pages;
 
 	if (__phys_to_pfn(addr) != pfn)
 		return 0;
 
-	return memblock_is_map_memory(__pfn_to_phys(pfn));
+	/*
+	 * If address less than pageblock_size bytes away from a present
+	 * memory chunk there still will be a memory map entry for it
+	 * because we round freed memory map to the pageblock boundaries.
+	 */
+	if (memblock_overlaps_region(&memblock.memory,
+				     ALIGN_DOWN(addr, pageblock_size),
+				     pageblock_size))
+		return 1;
+
+	return 0;
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
@@ -274,7 +285,6 @@ void __init arm_memblock_init(const struct machine_desc *mdesc)
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	early_init_fdt_reserve_self();
 	early_init_fdt_scan_reserved_mem();
 
 	/* reserve memory for DMA contiguous allocations */
@@ -323,7 +333,7 @@ static inline void poison_init_mem(void *s, size_t count)
 		*p++ = 0xe7fddef0;
 }
 
-static inline void
+static inline void __init
 free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct page *start_pg, *end_pg;
@@ -372,14 +382,14 @@ static void __init free_unused_memmap(void)
 		 */
 		start = min(start,
 				 ALIGN(prev_end, PAGES_PER_SECTION));
-#else
+#endif
 		/*
-		 * Align down here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank start aligned to
-		 * MAX_ORDER_NR_PAGES.
+		 * Align down here since many operations in VM subsystem
+		 * presume that there are no holes in the memory map inside
+		 * a pageblock
 		 */
-		start = round_down(start, MAX_ORDER_NR_PAGES);
-#endif
+		start = round_down(start, pageblock_nr_pages);
+
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
@@ -388,18 +398,20 @@ static void __init free_unused_memmap(void)
 			free_memmap(prev_end, start);
 
 		/*
-		 * Align up here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank end aligned to
-		 * MAX_ORDER_NR_PAGES.
+		 * Align up here since many operations in VM subsystem
+		 * presume that there are no holes in the memory map inside
+		 * a pageblock
 		 */
 		prev_end = ALIGN(memblock_region_memory_end_pfn(reg),
-				 MAX_ORDER_NR_PAGES);
+				 pageblock_nr_pages);
 	}
 
 #ifdef CONFIG_SPARSEMEM
-	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) {
+		prev_end = ALIGN(prev_end, pageblock_nr_pages);
 		free_memmap(prev_end,
 			    ALIGN(prev_end, PAGES_PER_SECTION));
+	}
 #endif
 }
 
@@ -470,7 +482,11 @@ static void __init free_highpages(void)
 void __init mem_init(void)
 {
 #ifdef CONFIG_ARM_LPAE
-	swiotlb_init(1);
+	if (swiotlb_force == SWIOTLB_FORCE ||
+	    max_pfn > arm_dma_pfn_limit)
+		swiotlb_init(1);
+	else
+		swiotlb_force = SWIOTLB_NO_FORCE;
 #endif
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
diff --git linux-libre-5.4-gnu1/arch/arm/mm/ioremap.c linux-libre-5.4.261-gnu1/arch/arm/mm/ioremap.c
index d42b93316183..841b66515b37 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/ioremap.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/ioremap.c
@@ -27,6 +27,7 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
+#include <linux/memblock.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -301,7 +302,8 @@ static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	 * Don't allow RAM to be mapped with mismatched attributes - this
 	 * causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn) && mtype != MT_MEMORY_RW))
+	if (WARN_ON(memblock_is_map_memory(PFN_PHYS(pfn)) &&
+		    mtype != MT_MEMORY_RW))
 		return NULL;
 
 	area = get_vm_area_caller(size, VM_IOREMAP, caller);
@@ -498,3 +500,11 @@ void __init early_ioremap_init(void)
 {
 	early_ioremap_setup();
 }
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return memblock_is_map_memory(pfn);
+}
diff --git linux-libre-5.4-gnu1/arch/arm/mm/mmu.c linux-libre-5.4.261-gnu1/arch/arm/mm/mmu.c
index 48c2888297dd..5becec790379 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/mmu.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/mmu.c
@@ -39,6 +39,8 @@
 #include "mm.h"
 #include "tcm.h"
 
+extern unsigned long __atags_pointer;
+
 /*
  * empty_zero_page is a special page that is used for
  * zero-initialized data and COW.
@@ -227,12 +229,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
@@ -312,6 +316,17 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+#ifdef CONFIG_ARM_LPAE
+		.prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+#else
+		.prot_sect = PMD_TYPE_SECT,
+#endif
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -413,9 +428,9 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 		     FIXADDR_END);
 	BUG_ON(idx >= __end_of_fixed_addresses);
 
-	/* we only support device mappings until pgprot_kernel has been set */
+	/* We support only device mappings before pgprot_kernel is set. */
 	if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
-		    pgprot_val(pgprot_kernel) == 0))
+		    pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
 		return;
 
 	if (pgprot_val(prot))
@@ -511,6 +526,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -593,6 +609,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -613,6 +630,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -676,6 +695,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -962,7 +983,7 @@ static void __init create_mapping(struct map_desc *md)
 		return;
 	}
 
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	if (md->type == MT_DEVICE &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
 	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1352,6 +1373,15 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 	for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+	if (__atags_pointer) {
+		/* create a read-only mapping of the device tree */
+		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+		map.virtual = FDT_FIXED_BASE;
+		map.length = FDT_FIXED_SIZE;
+		map.type = MT_MEMORY_RO;
+		create_mapping(&map);
+	}
+
 	/*
 	 * Map the kernel if it is XIP.
 	 * It is always first in the modulearea.
@@ -1512,8 +1542,7 @@ static void __init map_lowmem(void)
 }
 
 #ifdef CONFIG_ARM_PV_FIXUP
-extern unsigned long __atags_pointer;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
 pgtables_remap lpae_pgtables_remap_asm;
 
 /*
@@ -1526,7 +1555,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	unsigned long pa_pgd;
 	unsigned int cr, ttbcr;
 	long long offset;
-	void *boot_data;
 
 	if (!mdesc->pv_fixup)
 		return;
@@ -1543,7 +1571,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	 */
 	lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
 	pa_pgd = __pa(swapper_pg_dir);
-	boot_data = __va(__atags_pointer);
 	barrier();
 
 	pr_info("Switching physical address space to 0x%08llx\n",
@@ -1579,7 +1606,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	 * needs to be assembly.  It's fairly simple, as we're using the
 	 * temporary tables setup by the initial assembly code.
 	 */
-	lpae_pgtables_remap(offset, pa_pgd, boot_data);
+	lpae_pgtables_remap(offset, pa_pgd);
 
 	/* Re-enable the caches and cacheable TLB walks */
 	asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
diff --git linux-libre-5.4-gnu1/arch/arm/mm/nommu.c linux-libre-5.4.261-gnu1/arch/arm/mm/nommu.c
index 24ecf8d30a1e..74a24e6e9a2d 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/nommu.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1020.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1020.S
index 4fa5371bc662..2785da387c91 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1020.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1020.S
@@ -491,7 +491,7 @@ cpu_arm1020_name:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm1020_proc_info,#object
 __arm1020_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1020e.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1020e.S
index 5d8a8339e09a..e9ea237ed785 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1020e.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1020e.S
@@ -449,7 +449,7 @@ arm1020e_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm1020e_proc_info,#object
 __arm1020e_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1022.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1022.S
index b3dd95c345e4..920c279e7879 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1022.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1022.S
@@ -443,7 +443,7 @@ arm1022_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm1022_proc_info,#object
 __arm1022_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1026.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1026.S
index ac5afde12f35..0bdf25a95b10 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm1026.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm1026.S
@@ -138,7 +138,7 @@ ENTRY(arm1026_flush_kern_cache_all)
 	mov	ip, #0
 __flush_whole_cache:
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test, clean, invalidate
+1:	mrc	p15, 0, APSR_nzcv, c7, c14, 3		@ test, clean, invalidate
 	bne	1b
 #endif
 	tst	r2, #VM_EXEC
@@ -363,7 +363,7 @@ ENTRY(cpu_arm1026_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r1, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test, clean, invalidate
+1:	mrc	p15, 0, APSR_nzcv, c7, c14, 3		@ test, clean, invalidate
 	bne	1b
 #endif
 #ifndef CONFIG_CPU_ICACHE_DISABLE
@@ -437,7 +437,7 @@ arm1026_crval:
 	string	cpu_arm1026_name, "ARM1026EJ-S"
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm1026_proc_info,#object
 __arm1026_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm720.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm720.S
index c99d24363f32..39361e196d61 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm720.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm720.S
@@ -172,7 +172,7 @@ arm720_crval:
  * See <asm/procinfo.h> for a definition of this structure.
  */
 	
-		.section ".proc.info.init", #alloc
+		.section ".proc.info.init", "a"
 
 .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
 		.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm740.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm740.S
index 1b4a3838393f..1a94bbf6e53f 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm740.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm740.S
@@ -128,7 +128,7 @@ __arm740_setup:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 	.type	__arm740_proc_info,#object
 __arm740_proc_info:
 	.long	0x41807400
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm7tdmi.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm7tdmi.S
index 17a4687065c7..52b66cf0259e 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm7tdmi.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm7tdmi.S
@@ -72,7 +72,7 @@ __arm7tdmi_setup:
 
 		.align
 
-		.section ".proc.info.init", #alloc
+		.section ".proc.info.init", "a"
 
 .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
 	extra_hwcaps=0
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm920.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm920.S
index 298c76b47749..31ac8acc34dc 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm920.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm920.S
@@ -434,7 +434,7 @@ arm920_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm920_proc_info,#object
 __arm920_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm922.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm922.S
index 824be3a0bc23..ca2c7ca8af21 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm922.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm922.S
@@ -412,7 +412,7 @@ arm922_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm922_proc_info,#object
 __arm922_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm925.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm925.S
index d40cff8f102c..a381a0c9f109 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm925.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm925.S
@@ -477,7 +477,7 @@ arm925_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
 	.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm926.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm926.S
index f3cd08f353f0..1ba253c2bce1 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm926.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm926.S
@@ -131,7 +131,7 @@ __flush_whole_cache:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
 #else
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
+1:	mrc	p15, 0, APSR_nzcv, c7, c14, 3 	@ test,clean,invalidate
 	bne	1b
 #endif
 	tst	r2, #VM_EXEC
@@ -358,7 +358,7 @@ ENTRY(cpu_arm926_switch_mm)
 	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
 #else
 @ && 'Clean & Invalidate whole DCache'
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
+1:	mrc	p15, 0, APSR_nzcv, c7, c14, 3 	@ test,clean,invalidate
 	bne	1b
 #endif
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
@@ -460,7 +460,7 @@ arm926_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm926_proc_info,#object
 __arm926_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm940.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm940.S
index 1c26d991386d..4b8a00220cc9 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm940.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm940.S
@@ -340,7 +340,7 @@ __arm940_setup:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__arm940_proc_info,#object
 __arm940_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm946.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm946.S
index 2dc1c75a4fd4..555becf9c758 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm946.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm946.S
@@ -395,7 +395,7 @@ __arm946_setup:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 	.type	__arm946_proc_info,#object
 __arm946_proc_info:
 	.long	0x41009460
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-arm9tdmi.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm9tdmi.S
index 913c06e590af..ef517530130b 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-arm9tdmi.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-arm9tdmi.S
@@ -66,7 +66,7 @@ __arm9tdmi_setup:
 
 		.align
 
-		.section ".proc.info.init", #alloc
+		.section ".proc.info.init", "a"
 
 .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
 		.type	__\name\()_proc_info, #object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-fa526.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-fa526.S
index 8120b6f4dbb8..dddf833fe000 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-fa526.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-fa526.S
@@ -185,7 +185,7 @@ fa526_cr1_set:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__fa526_proc_info,#object
 __fa526_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-feroceon.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-feroceon.S
index bb6dc34d42a3..b12b76bc8d30 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-feroceon.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-feroceon.S
@@ -571,7 +571,7 @@ feroceon_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
 	.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-macros.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-macros.S
index 5461d589a1e2..86e54447dc91 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-macros.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-macros.S
@@ -5,6 +5,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
+#include <linux/const.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
@@ -30,7 +31,7 @@
  * act_mm - get current->active_mm
  */
 	.macro	act_mm, rd
-	bic	\rd, sp, #8128
+	bic	\rd, sp, #(THREAD_SIZE - 1) & ~63
 	bic	\rd, \rd, #63
 	ldr	\rd, [\rd, #TI_TASK]
 	.if (TSK_ACTIVE_MM > IMM12_MASK)
@@ -341,6 +342,7 @@ ENTRY(\name\()_cache_fns)
 
 .macro define_tlb_functions name:req, flags_up:req, flags_smp
 	.type	\name\()_tlb_fns, #object
+	.align 2
 ENTRY(\name\()_tlb_fns)
 	.long	\name\()_flush_user_tlb_range
 	.long	\name\()_flush_kern_tlb_range
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-mohawk.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-mohawk.S
index f08308578885..d47d6c5cee63 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-mohawk.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-mohawk.S
@@ -416,7 +416,7 @@ mohawk_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__88sv331x_proc_info,#object
 __88sv331x_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-sa110.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-sa110.S
index d5bc5d702563..baba503ba816 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-sa110.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-sa110.S
@@ -196,7 +196,7 @@ sa110_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	.type	__sa110_proc_info,#object
 __sa110_proc_info:
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-sa1100.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-sa1100.S
index be7b611c76c7..75ebacc8e4e5 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-sa1100.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-sa1100.S
@@ -239,7 +239,7 @@ sa1100_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
 	.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-v6.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v6.S
index c1c85eb3484f..1dd0d5ca27da 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-v6.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v6.S
@@ -261,7 +261,7 @@ v6_crval:
 	string	cpu_elf_name, "v6"
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	/*
 	 * Match any ARMv6 processor core.
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-v7-bugs.c linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7-bugs.c
index 9a07916af8dd..b09c54499f95 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-v7-bugs.c
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7-bugs.c
@@ -7,8 +7,35 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/proc-fns.h>
+#include <asm/spectre.h>
 #include <asm/system_misc.h>
 
+#ifdef CONFIG_ARM_PSCI
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	switch ((int)res.a0) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+}
+#else
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn);
 
@@ -37,13 +64,60 @@ static void __maybe_unused call_hvc_arch_workaround_1(void)
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void cpu_v7_spectre_init(void)
+static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
 	const char *spectre_v2_method = NULL;
 	int cpu = smp_processor_id();
 
 	if (per_cpu(harden_branch_predictor_fn, cpu))
-		return;
+		return SPECTRE_MITIGATED;
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_bpiall;
+		spectre_v2_method = "BPIALL";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_iciallu;
+		spectre_v2_method = "ICIALLU";
+		break;
+
+	case SPECTRE_V2_METHOD_HVC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_hvc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
+		spectre_v2_method = "hypervisor";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_smc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_smc_switch_mm;
+		spectre_v2_method = "firmware";
+		break;
+	}
+
+	if (spectre_v2_method)
+		pr_info("CPU%u: Spectre v2: using %s workaround\n",
+			smp_processor_id(), spectre_v2_method);
+
+	return SPECTRE_MITIGATED;
+}
+#else
+static unsigned int spectre_v2_install_workaround(unsigned int method)
+{
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
+
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
+static void cpu_v7_spectre_v2_init(void)
+{
+	unsigned int state, method = 0;
 
 	switch (read_cpuid_part()) {
 	case ARM_CPU_PART_CORTEX_A8:
@@ -52,29 +126,37 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_bpiall;
-		spectre_v2_method = "BPIALL";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
 		break;
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_iciallu;
-		spectre_v2_method = "ICIALLU";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_ICIALLU;
+		break;
+
+	case ARM_CPU_PART_BRAHMA_B53:
+		/* Requires no workaround */
+		state = SPECTRE_UNAFFECTED;
 		break;
 
-#ifdef CONFIG_ARM_PSCI
 	default:
 		/* Other ARM CPUs require no workaround */
-		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
+		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) {
+			state = SPECTRE_UNAFFECTED;
 			break;
+		}
 		/* fallthrough */
-		/* Cortex A57/A72 require firmware workaround */
+	/* Cortex A57/A72 require firmware workaround */
 	case ARM_CPU_PART_CORTEX_A57:
 	case ARM_CPU_PART_CORTEX_A72: {
 		struct arm_smccc_res res;
 
+		state = spectre_v2_get_cpu_fw_mitigation_state();
+		if (state != SPECTRE_MITIGATED)
+			break;
+
 		if (psci_ops.smccc_version == SMCCC_VERSION_1_0)
 			break;
 
@@ -84,10 +166,7 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_hvc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
-			spectre_v2_method = "hypervisor";
+			method = SPECTRE_V2_METHOD_HVC;
 			break;
 
 		case PSCI_CONDUIT_SMC:
@@ -95,29 +174,97 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_smc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
-			spectre_v2_method = "firmware";
+			method = SPECTRE_V2_METHOD_SMC;
 			break;
 
 		default:
+			state = SPECTRE_VULNERABLE;
 			break;
 		}
 	}
-#endif
 	}
 
-	if (spectre_v2_method)
-		pr_info("CPU%u: Spectre v2: using %s workaround\n",
-			smp_processor_id(), spectre_v2_method);
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_v2_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+static int spectre_bhb_method;
+
+static const char *spectre_bhb_method_name(int method)
+{
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		return "loop";
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		return "BPIALL";
+
+	default:
+		return "unknown";
+	}
+}
+
+static int spectre_bhb_install_workaround(int method)
+{
+	if (spectre_bhb_method != method) {
+		if (spectre_bhb_method) {
+			pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",
+			       smp_processor_id());
+
+			return SPECTRE_VULNERABLE;
+		}
+
+		if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE)
+			return SPECTRE_VULNERABLE;
+
+		spectre_bhb_method = method;
+
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
+
+	return SPECTRE_MITIGATED;
 }
 #else
-static void cpu_v7_spectre_init(void)
+static int spectre_bhb_install_workaround(int method)
 {
+	return SPECTRE_VULNERABLE;
 }
 #endif
 
+static void cpu_v7_spectre_bhb_init(void)
+{
+	unsigned int state, method = 0;
+
+	switch (read_cpuid_part()) {
+	case ARM_CPU_PART_CORTEX_A15:
+	case ARM_CPU_PART_BRAHMA_B15:
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_LOOP8;
+		break;
+
+	case ARM_CPU_PART_CORTEX_A73:
+	case ARM_CPU_PART_CORTEX_A75:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
+		break;
+
+	default:
+		state = SPECTRE_UNAFFECTED;
+		break;
+	}
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_bhb_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
 static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned,
 						  u32 mask, const char *msg)
 {
@@ -146,16 +293,18 @@ static bool check_spectre_auxcr(bool *warned, u32 bit)
 void cpu_v7_ca8_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
 
 void cpu_v7_bugs_init(void)
 {
-	cpu_v7_spectre_init();
+	cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-v7.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7.S
index c4e8006a1a8c..48e0ef6f0dcc 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-v7.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7.S
@@ -644,7 +644,7 @@ __v7_setup_stack:
 	string	cpu_elf_name, "v7"
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 	/*
 	 * Standard v7 proc info content
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-v7m.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7m.S
index 1a49d503eafc..84459c1d31b8 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-v7m.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-v7m.S
@@ -93,7 +93,7 @@ ENTRY(cpu_cm7_proc_fin)
 	ret	lr
 ENDPROC(cpu_cm7_proc_fin)
 
-	.section ".init.text", #alloc, #execinstr
+	.section ".init.text", "ax"
 
 __v7m_cm7_setup:
 	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)
@@ -177,7 +177,7 @@ ENDPROC(__v7m_setup)
 	string cpu_elf_name "v7m"
 	string cpu_v7m_name "ARMv7-M"
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0,  proc_fns = v7m_processor_functions
 	.long	0			/* proc_info_list.__cpu_mm_mmu_flags */
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-xsc3.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-xsc3.S
index 1ac0fbbe9f12..42eaecc43cfe 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-xsc3.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-xsc3.S
@@ -496,7 +496,7 @@ xsc3_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
 	.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/proc-xscale.S linux-libre-5.4.261-gnu1/arch/arm/mm/proc-xscale.S
index bdb2b7749b03..18ac5a1f8922 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/proc-xscale.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/proc-xscale.S
@@ -610,7 +610,7 @@ xscale_crval:
 
 	.align
 
-	.section ".proc.info.init", #alloc
+	.section ".proc.info.init", "a"
 
 .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
 	.type	__\name\()_proc_info,#object
diff --git linux-libre-5.4-gnu1/arch/arm/mm/pv-fixup-asm.S linux-libre-5.4.261-gnu1/arch/arm/mm/pv-fixup-asm.S
index 769778928356..6d081d1cdc69 100644
--- linux-libre-5.4-gnu1/arch/arm/mm/pv-fixup-asm.S
+++ linux-libre-5.4.261-gnu1/arch/arm/mm/pv-fixup-asm.S
@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
 
 	/* Update level 2 entries for the boot data */
 	add	r7, r2, #0x1000
-	add	r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
-	bic	r7, r7, #(1 << L2_ORDER) - 1
+	movw	r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+	add	r7, r7, r3
 	ldrd	r4, r5, [r7]
 	adds	r4, r4, r0
 	adc	r5, r5, r1
diff --git linux-libre-5.4-gnu1/arch/arm/net/bpf_jit_32.c linux-libre-5.4.261-gnu1/arch/arm/net/bpf_jit_32.c
index 97dc386e3cb8..1c6e57f1dbc4 100644
--- linux-libre-5.4-gnu1/arch/arm/net/bpf_jit_32.c
+++ linux-libre-5.4.261-gnu1/arch/arm/net/bpf_jit_32.c
@@ -36,6 +36,10 @@
  *                        +-----+
  *                        |RSVD | JIT scratchpad
  * current ARM_SP =>      +-----+ <= (BPF_FP - STACK_SIZE + SCRATCH_SIZE)
+ *                        | ... | caller-saved registers
+ *                        +-----+
+ *                        | ... | arguments passed on stack
+ * ARM_SP during call =>  +-----|
  *                        |     |
  *                        | ... | Function call stack
  *                        |     |
@@ -63,6 +67,12 @@
  *
  * When popping registers off the stack at the end of a BPF function, we
  * reference them via the current ARM_FP register.
+ *
+ * Some eBPF operations are implemented via a call to a helper function.
+ * Such calls are "invisible" in the eBPF code, so it is up to the calling
+ * program to preserve any caller-saved ARM registers during the call. The
+ * JIT emits code to push and pop those registers onto the stack, immediately
+ * above the callee stack frame.
  */
 #define CALLEE_MASK	(1 << ARM_R4 | 1 << ARM_R5 | 1 << ARM_R6 | \
 			 1 << ARM_R7 | 1 << ARM_R8 | 1 << ARM_R9 | \
@@ -70,6 +80,8 @@
 #define CALLEE_PUSH_MASK (CALLEE_MASK | 1 << ARM_LR)
 #define CALLEE_POP_MASK  (CALLEE_MASK | 1 << ARM_PC)
 
+#define CALLER_MASK	(1 << ARM_R0 | 1 << ARM_R1 | 1 << ARM_R2 | 1 << ARM_R3)
+
 enum {
 	/* Stack layout - these are offsets from (top of stack - 4) */
 	BPF_R2_HI,
@@ -464,6 +476,7 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
 
 static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 {
+	const int exclude_mask = BIT(ARM_R0) | BIT(ARM_R1);
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 
 #if __LINUX_ARM_ARCH__ == 7
@@ -495,11 +508,17 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 	}
 
+	/* Push caller-saved registers on stack */
+	emit(ARM_PUSH(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Call appropriate function */
 	emit_mov_i(ARM_IP, op == BPF_DIV ?
 		   (u32)jit_udiv32 : (u32)jit_mod32, ctx);
 	emit_blx_r(ARM_IP, ctx);
 
+	/* Restore caller-saved registers from stack */
+	emit(ARM_POP(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Save return value */
 	if (rd != ARM_R0)
 		emit(ARM_MOV_R(rd, ARM_R0), ctx);
@@ -929,7 +948,11 @@ static inline void emit_a32_rsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do LSR operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for LSR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
@@ -955,7 +978,11 @@ static inline void emit_a32_arsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do ARSH operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for ASR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);
@@ -992,21 +1019,35 @@ static inline void emit_a32_mul_r64(const s8 dst[], const s8 src[],
 	arm_bpf_put_reg32(dst_hi, rd[0], ctx);
 }
 
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	case BPF_DW:
+		/* Need to make sure off+4 does not overflow. */
+		off_max = 0xfff - 4;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s32 off_max;
 	s8 rd;
 
 	rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
 		rd = tmp[0];
@@ -1035,18 +1076,12 @@ static inline void emit_str_r(const s8 dst, const s8 src[],
 
 /* dst = *(size*)(src + off) */
 static inline void emit_ldx_r(const s8 dst[], const s8 src,
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
 	s8 rm = src;
-	s32 off_max;
-
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
 
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
 		rm = tmp[0];
@@ -1586,6 +1621,9 @@ exit:
 		rn = arm_bpf_get_reg32(src_lo, tmp2[1], ctx);
 		emit_ldx_r(dst, rn, off, ctx, BPF_SIZE(code));
 		break;
+	/* speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		break;
 	/* ST: *(size *)(dst + off) = imm */
 	case BPF_ST | BPF_MEM | BPF_W:
 	case BPF_ST | BPF_MEM | BPF_H:
diff --git linux-libre-5.4-gnu1/arch/arm/nwfpe/Makefile linux-libre-5.4.261-gnu1/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- linux-libre-5.4-gnu1/arch/arm/nwfpe/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git linux-libre-5.4-gnu1/arch/arm/plat-samsung/Kconfig linux-libre-5.4.261-gnu1/arch/arm/plat-samsung/Kconfig
index 301e572651c0..790c87ee7271 100644
--- linux-libre-5.4-gnu1/arch/arm/plat-samsung/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm/plat-samsung/Kconfig
@@ -241,6 +241,7 @@ config SAMSUNG_PM_DEBUG
 	depends on PM && DEBUG_KERNEL
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+	depends on DEBUG_LL && MMU
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
diff --git linux-libre-5.4-gnu1/arch/arm/probes/decode.h linux-libre-5.4.261-gnu1/arch/arm/probes/decode.h
index 973173598992..facc889d05ee 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/decode.h
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/decode.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/checkers-common.c linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/checkers-common.c
index 4d720990cf2a..eba7ac4725c0 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/checkers-common.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/checkers-common.c
@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
  * Different from other insn uses imm8, the real addressing offset of
  * STRD in T32 encoding should be imm8 * 4. See ARMARM description.
  */
-enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
+static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
 		struct arch_probes_insn *asi,
 		const struct decode_header *h)
 {
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/core.c linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/core.c
index 90b5bc723c83..44b5f7dbcc00 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/core.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/core.c
@@ -231,7 +231,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
  * kprobe, and that level is reserved for user kprobe handlers, so we can't
  * risk encountering a new kprobe in an interrupt handler.
  */
-void __kprobes kprobe_handler(struct pt_regs *regs)
+static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur;
 	struct kprobe_ctlblk *kcb;
@@ -534,7 +534,7 @@ static struct undef_hook kprobes_arm_break_hook = {
 
 #endif /* !CONFIG_THUMB2_KERNEL */
 
-int __init arch_init_kprobes()
+int __init arch_init_kprobes(void)
 {
 	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/opt-arm.c linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/opt-arm.c
index 7a449df0b359..e20304f1d8bc 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/opt-arm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/opt-arm.c
@@ -85,21 +85,21 @@ asm (
 			"optprobe_template_end:\n");
 
 #define TMPL_VAL_IDX \
-	((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry)
 #define TMPL_CALL_IDX \
-	((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry)
 #define TMPL_END_IDX \
-	((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry)
 #define TMPL_ADD_SP \
-	((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_SUB_SP \
-	((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_BEGIN \
-	((unsigned long *)&optprobe_template_restore_begin - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_ORIGN_INSN \
-	((unsigned long *)&optprobe_template_restore_orig_insn - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_END \
-	((unsigned long *)&optprobe_template_restore_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry)
 
 /*
  * ARM can always optimize an instruction when using ARM ISA, except
@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 	}
 }
 
-extern void kprobe_handler(struct pt_regs *regs);
-
 static void
 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
@@ -234,7 +232,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *or
 	}
 
 	/* Copy arch-dep-instance from template. */
-	memcpy(code, (unsigned long *)&optprobe_template_entry,
+	memcpy(code, (unsigned long *)optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
 
 	/* Adjust buffer according to instruction. */
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-core.c linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-core.c
index c562832b8627..171c7076b89f 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-core.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-core.c
@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
 	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
 };
 
-unsigned coverage_start_registers(const struct decode_header *h)
+static unsigned coverage_start_registers(const struct decode_header *h)
 {
 	unsigned regs = 0;
 	int i;
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-core.h linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-core.h
index 19a5b2add41e..805116c2ec27 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-core.h
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-core.h
@@ -453,3 +453,7 @@ void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
+
+void __kprobes_test_case_start(void);
+void __kprobes_test_case_end_16(void);
+void __kprobes_test_case_end_32(void);
diff --git linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-thumb.c linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-thumb.c
index 456c181a7bfe..4e11f0b760f8 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/kprobes/test-thumb.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/kprobes/test-thumb.c
@@ -441,21 +441,21 @@ void kprobe_thumb32_test_cases(void)
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RX("tbh	[pc, r",7, (9f-(1f+4))>>1,"]",
+	TEST_RX("tbh	[pc, r",7, (9f-(1f+4))>>1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RX("tbh	[pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+	TEST_RX("tbh	[pc, r",12, ((9f-(1f+4))>>1)+1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
 		"3:	mvn	r0, r0	\n\t"
 		"2:	nop		\n\t")
 
-	TEST_RRX("tbh	[r",1,9f, ", r",14,1,"]",
+	TEST_RRX("tbh	[r",1,9f, ", r",14,1,", lsl #1]",
 		"9:			\n\t"
 		".short	(2f-1b-4)>>1	\n\t"
 		".short	(3f-1b-4)>>1	\n\t"
@@ -468,10 +468,10 @@ void kprobe_thumb32_test_cases(void)
 
 	TEST_UNSUPPORTED("strexb	r0, r1, [r2]")
 	TEST_UNSUPPORTED("strexh	r0, r1, [r2]")
-	TEST_UNSUPPORTED("strexd	r0, r1, [r2]")
+	TEST_UNSUPPORTED("strexd	r0, r1, r2, [r2]")
 	TEST_UNSUPPORTED("ldrexb	r0, [r1]")
 	TEST_UNSUPPORTED("ldrexh	r0, [r1]")
-	TEST_UNSUPPORTED("ldrexd	r0, [r1]")
+	TEST_UNSUPPORTED("ldrexd	r0, r1, [r1]")
 
 	TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
 
diff --git linux-libre-5.4-gnu1/arch/arm/probes/uprobes/core.c linux-libre-5.4.261-gnu1/arch/arm/probes/uprobes/core.c
index c4b49b322e8a..f5f790c6e5f8 100644
--- linux-libre-5.4-gnu1/arch/arm/probes/uprobes/core.c
+++ linux-libre-5.4.261-gnu1/arch/arm/probes/uprobes/core.c
@@ -204,7 +204,7 @@ unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
 static struct undef_hook uprobes_arm_break_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SWBP_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };
@@ -212,7 +212,7 @@ static struct undef_hook uprobes_arm_break_hook = {
 static struct undef_hook uprobes_arm_ss_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SS_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };
diff --git linux-libre-5.4-gnu1/arch/arm/vfp/Makefile linux-libre-5.4.261-gnu1/arch/arm/vfp/Makefile
index 9975b63ac3b0..749901a72d6d 100644
--- linux-libre-5.4-gnu1/arch/arm/vfp/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm/vfp/Makefile
@@ -8,6 +8,4 @@
 # ccflags-y := -DDEBUG
 # asflags-y := -DDEBUG
 
-KBUILD_AFLAGS	:=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft)
-
 obj-y		+= vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o
diff --git linux-libre-5.4-gnu1/arch/arm/vfp/entry.S linux-libre-5.4.261-gnu1/arch/arm/vfp/entry.S
index 0186cf9da890..27b0a1f27fbd 100644
--- linux-libre-5.4-gnu1/arch/arm/vfp/entry.S
+++ linux-libre-5.4.261-gnu1/arch/arm/vfp/entry.S
@@ -37,20 +37,3 @@ ENDPROC(vfp_null_entry)
 	.align	2
 .LCvfp:
 	.word	vfp_vector
-
-@ This code is called if the VFP does not exist. It needs to flag the
-@ failure to the VFP initialisation code.
-
-	__INIT
-ENTRY(vfp_testing_entry)
-	dec_preempt_count_ti r10, r4
-	ldr	r0, VFP_arch_address
-	str	r0, [r0]		@ set to non-zero value
-	ret	r9			@ we have handled the fault
-ENDPROC(vfp_testing_entry)
-
-	.align	2
-VFP_arch_address:
-	.word	VFP_arch
-
-	__FINIT
diff --git linux-libre-5.4-gnu1/arch/arm/vfp/vfphw.S linux-libre-5.4.261-gnu1/arch/arm/vfp/vfphw.S
index b2e560290860..772c6a3b1f72 100644
--- linux-libre-5.4-gnu1/arch/arm/vfp/vfphw.S
+++ linux-libre-5.4.261-gnu1/arch/arm/vfp/vfphw.S
@@ -78,11 +78,6 @@
 ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
-	ldr	r3, [sp, #S_PSR]	@ Neither lazy restore nor FP exceptions
-	and	r3, r3, #MODE_MASK	@ are supported in kernel mode
-	teq	r3, #USR_MODE
-	bne	vfp_kmode_exception	@ Returns through lr
-
 	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
 	DBGSTR1	"fpexc %08x", r1
 	tst	r1, #FPEXC_EN
@@ -258,11 +253,14 @@ vfp_current_hw_state_address:
 
 ENTRY(vfp_get_float)
 	tbl_branch r0, r3, #3
+	.fpu	vfpv2
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
+1:	vmov	r0, s\dr
 	ret	lr
 	.org	1b + 8
-1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
+	.endr
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	r0, s\dr
 	ret	lr
 	.org	1b + 8
 	.endr
@@ -270,11 +268,14 @@ ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
 	tbl_branch r1, r3, #3
+	.fpu	vfpv2
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
+1:	vmov	s\dr, r0
 	ret	lr
 	.org	1b + 8
-1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
+	.endr
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	s\dr, r0
 	ret	lr
 	.org	1b + 8
 	.endr
@@ -282,15 +283,17 @@ ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
 	tbl_branch r0, r3, #3
+	.fpu	vfpv2
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	fmrrd	r0, r1, d\dr
+1:	vmov	r0, r1, d\dr
 	ret	lr
 	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+	.fpu	vfpv3
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	r0, r1, d\dr
 	ret	lr
 	.org	1b + 8
 	.endr
@@ -304,15 +307,17 @@ ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
 	tbl_branch r2, r3, #3
+	.fpu	vfpv2
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	fmdrr	d\dr, r0, r1
+1:	vmov	d\dr, r0, r1
 	ret	lr
 	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
+	.fpu	vfpv3
 	@ d16 - d31 registers
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	d\dr, r0, r1
 	ret	lr
 	.org	1b + 8
 	.endr
diff --git linux-libre-5.4-gnu1/arch/arm/vfp/vfpmodule.c linux-libre-5.4.261-gnu1/arch/arm/vfp/vfpmodule.c
index 8c9e7f9f0277..2cb355c1b5b7 100644
--- linux-libre-5.4-gnu1/arch/arm/vfp/vfpmodule.c
+++ linux-libre-5.4.261-gnu1/arch/arm/vfp/vfpmodule.c
@@ -23,6 +23,7 @@
 #include <asm/cputype.h>
 #include <asm/system_info.h>
 #include <asm/thread_notify.h>
+#include <asm/traps.h>
 #include <asm/vfp.h>
 
 #include "vfpinstr.h"
@@ -31,7 +32,6 @@
 /*
  * Our undef handlers (in entry.S)
  */
-asmlinkage void vfp_testing_entry(void);
 asmlinkage void vfp_support_entry(void);
 asmlinkage void vfp_null_entry(void);
 
@@ -42,7 +42,7 @@ asmlinkage void (*vfp_vector)(void) = vfp_null_entry;
  * Used in startup: set to non-zero if VFP checks fail
  * After startup, holds VFP architecture
  */
-unsigned int VFP_arch;
+static unsigned int __initdata VFP_arch;
 
 /*
  * The pointer to the vfpstate structure of the thread which currently
@@ -436,7 +436,7 @@ static void vfp_enable(void *unused)
  * present on all CPUs within a SMP complex. Needs to be called prior to
  * vfp_init().
  */
-void vfp_disable(void)
+void __init vfp_disable(void)
 {
 	if (VFP_arch) {
 		pr_debug("%s: should be called prior to vfp_init\n", __func__);
@@ -642,7 +642,9 @@ static int vfp_starting_cpu(unsigned int unused)
 	return 0;
 }
 
-void vfp_kmode_exception(void)
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr)
 {
 	/*
 	 * If we reach this point, a floating point exception has been raised
@@ -660,9 +662,51 @@ void vfp_kmode_exception(void)
 		pr_crit("BUG: unsupported FP instruction in kernel mode\n");
 	else
 		pr_crit("BUG: FP instruction issued in kernel mode with FP unit disabled\n");
+	pr_crit("FPEXC == 0x%08x\n", fmrx(FPEXC));
+	return 1;
 }
 
-#ifdef CONFIG_KERNEL_MODE_NEON
+static struct undef_hook vfp_kmode_exception_hook[] = {{
+	.instr_mask	= 0xfe000000,
+	.instr_val	= 0xf2000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xff100000,
+	.instr_val	= 0xf4000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xef000000,
+	.instr_val	= 0xef000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE | PSR_T_BIT,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0xff100000,
+	.instr_val	= 0xf9000000,
+	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+	.cpsr_val	= SVC_MODE | PSR_T_BIT,
+	.fn		= vfp_kmode_exception,
+}, {
+	.instr_mask	= 0x0c000e00,
+	.instr_val	= 0x0c000a00,
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_kmode_exception,
+}};
+
+static int __init vfp_kmode_exception_hook_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vfp_kmode_exception_hook); i++)
+		register_undef_hook(&vfp_kmode_exception_hook[i]);
+	return 0;
+}
+subsys_initcall(vfp_kmode_exception_hook_init);
 
 /*
  * Kernel-side NEON support functions
@@ -708,6 +752,21 @@ EXPORT_SYMBOL(kernel_neon_end);
 
 #endif /* CONFIG_KERNEL_MODE_NEON */
 
+static int __init vfp_detect(struct pt_regs *regs, unsigned int instr)
+{
+	VFP_arch = UINT_MAX;	/* mark as not present */
+	regs->ARM_pc += 4;
+	return 0;
+}
+
+static struct undef_hook vfp_detect_hook __initdata = {
+	.instr_mask	= 0x0c000e00,
+	.instr_val	= 0x0c000a00,
+	.cpsr_mask	= MODE_MASK,
+	.cpsr_val	= SVC_MODE,
+	.fn		= vfp_detect,
+};
+
 /*
  * VFP support code initialisation.
  */
@@ -728,10 +787,11 @@ static int __init vfp_init(void)
 	 * The handler is already setup to just log calls, so
 	 * we just need to read the VFPSID register.
 	 */
-	vfp_vector = vfp_testing_entry;
+	register_undef_hook(&vfp_detect_hook);
 	barrier();
 	vfpsid = fmrx(FPSID);
 	barrier();
+	unregister_undef_hook(&vfp_detect_hook);
 	vfp_vector = vfp_null_entry;
 
 	pr_info("VFP support v0.3: ");
diff --git linux-libre-5.4-gnu1/arch/arm/xen/enlighten.c linux-libre-5.4.261-gnu1/arch/arm/xen/enlighten.c
index dd6804a64f1a..57dfc13b2752 100644
--- linux-libre-5.4-gnu1/arch/arm/xen/enlighten.c
+++ linux-libre-5.4.261-gnu1/arch/arm/xen/enlighten.c
@@ -370,8 +370,6 @@ static int __init xen_guest_init(void)
 		return -ENOMEM;
 	}
 	gnttab_init();
-	if (!xen_initial_domain())
-		xenbus_probe(NULL);
 
 	/*
 	 * Making sure board specific code will not set up ops for
diff --git linux-libre-5.4-gnu1/arch/arm/xen/mm.c linux-libre-5.4.261-gnu1/arch/arm/xen/mm.c
index 38fa917c8585..a6a2514e5fe8 100644
--- linux-libre-5.4-gnu1/arch/arm/xen/mm.c
+++ linux-libre-5.4.261-gnu1/arch/arm/xen/mm.c
@@ -70,20 +70,20 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op)
  * pfn_valid returns true the pages is local and we can use the native
  * dma-direct functions, otherwise we call the Xen specific version.
  */
-void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
-		phys_addr_t paddr, size_t size, enum dma_data_direction dir)
+void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	if (pfn_valid(PFN_DOWN(handle)))
-		arch_sync_dma_for_cpu(dev, paddr, size, dir);
+		arch_sync_dma_for_cpu(paddr, size, dir);
 	else if (dir != DMA_TO_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
 }
 
-void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
-		phys_addr_t paddr, size_t size, enum dma_data_direction dir)
+void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	if (pfn_valid(PFN_DOWN(handle)))
-		arch_sync_dma_for_device(dev, paddr, size, dir);
+		arch_sync_dma_for_device(paddr, size, dir);
 	else if (dir == DMA_FROM_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
 	else
diff --git linux-libre-5.4-gnu1/arch/arm/xen/p2m.c linux-libre-5.4.261-gnu1/arch/arm/xen/p2m.c
index e52950a43f2e..4a1991a103ea 100644
--- linux-libre-5.4-gnu1/arch/arm/xen/p2m.c
+++ linux-libre-5.4.261-gnu1/arch/arm/xen/p2m.c
@@ -62,11 +62,12 @@ out:
 
 unsigned long __pfn_to_mfn(unsigned long pfn)
 {
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 	struct xen_p2m_entry *entry;
 	unsigned long irqflags;
 
 	read_lock_irqsave(&p2m_lock, irqflags);
+	n = phys_to_mach.rb_node;
 	while (n) {
 		entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 		if (entry->pfn <= pfn &&
@@ -93,10 +94,39 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 	int i;
 
 	for (i = 0; i < count; i++) {
+		struct gnttab_unmap_grant_ref unmap;
+		int rc;
+
 		if (map_ops[i].status)
 			continue;
-		set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
-				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT);
+		if (likely(set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT)))
+			continue;
+
+		/*
+		 * Signal an error for this slot. This in turn requires
+		 * immediate unmapping.
+		 */
+		map_ops[i].status = GNTST_general_error;
+		unmap.host_addr = map_ops[i].host_addr,
+		unmap.handle = map_ops[i].handle;
+		map_ops[i].handle = ~0;
+		if (map_ops[i].flags & GNTMAP_device_map)
+			unmap.dev_bus_addr = map_ops[i].dev_bus_addr;
+		else
+			unmap.dev_bus_addr = 0;
+
+		/*
+		 * Pre-populate the status field, to be recognizable in
+		 * the log message below.
+		 */
+		unmap.status = 1;
+
+		rc = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
+					       &unmap, 1);
+		if (rc || unmap.status != GNTST_okay)
+			pr_err_once("gnttab unmap failed: rc=%d st=%d\n",
+				    rc, unmap.status);
 	}
 
 	return 0;
@@ -124,10 +154,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
 	int rc;
 	unsigned long irqflags;
 	struct xen_p2m_entry *p2m_entry;
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 
 	if (mfn == INVALID_P2M_ENTRY) {
 		write_lock_irqsave(&p2m_lock, irqflags);
+		n = phys_to_mach.rb_node;
 		while (n) {
 			p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 			if (p2m_entry->pfn <= pfn &&
diff --git linux-libre-5.4-gnu1/arch/arm64/Kconfig linux-libre-5.4.261-gnu1/arch/arm64/Kconfig
index 3f047afb982c..384b1bf56667 100644
--- linux-libre-5.4-gnu1/arch/arm64/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm64/Kconfig
@@ -139,6 +139,7 @@ config ARM64
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
@@ -180,7 +181,6 @@ config ARM64
 	select PCI_SYSCALL if PCI
 	select POWER_RESET
 	select POWER_SUPPLY
-	select REFCOUNT_FULL
 	select SPARSE_IRQ
 	select SWIOTLB
 	select SYSCTL_EXCEPTION_TRACE
@@ -488,7 +488,7 @@ config ARM64_ERRATUM_1024718
 	help
 	  This option adds a workaround for ARM Cortex-A55 Erratum 1024718.
 
-	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect
+	  Affected Cortex-A55 cores (all revisions) could cause incorrect
 	  update of the hardware dirty bit when the DBM/AP bits are updated
 	  without a break-before-make. The workaround is to disable the usage
 	  of hardware DBM locally on the affected cores. CPUs not affected by
@@ -558,6 +558,38 @@ config ARM64_ERRATUM_1463225
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1542419
+	bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
+	default y
+	help
+	  This option adds a workaround for ARM Neoverse-N1 erratum
+	  1542419.
+
+	  Affected Neoverse-N1 cores could execute a stale instruction when
+	  modified by another CPU. The workaround depends on a firmware
+	  counterpart.
+
+	  Workaround the issue by hiding the DIC feature from EL0. This
+	  forces user-space to perform cache maintenance.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1742098
+	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
+	depends on COMPAT
+	default y
+	help
+	  This option removes the AES hwcap for aarch32 user-space to
+	  workaround erratum 1742098 on Cortex-A57 and Cortex-A72.
+
+	  Affected parts may corrupt the AES state if an interrupt is
+	  taken between a pair of AES instructions. These instructions
+	  are only present if the cryptography extensions are present.
+	  All software should have a fallback implementation for CPUs
+	  that don't implement the cryptography extensions.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1122,6 +1154,15 @@ config ARM64_SSBD
 
 	  If unsure, say Y.
 
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
 config RODATA_FULL_DEFAULT_ENABLED
 	bool "Apply r/o permissions of VM areas also to their linear aliases"
 	default y
diff --git linux-libre-5.4-gnu1/arch/arm64/Kconfig.platforms linux-libre-5.4.261-gnu1/arch/arm64/Kconfig.platforms
index 16d761475a86..90202e5608d1 100644
--- linux-libre-5.4-gnu1/arch/arm64/Kconfig.platforms
+++ linux-libre-5.4.261-gnu1/arch/arm64/Kconfig.platforms
@@ -54,6 +54,7 @@ config ARCH_BCM_IPROC
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
 	select DW_APB_ICTL
+	select DW_APB_TIMER_OF
 	select GPIOLIB
 	select PINCTRL
 	help
@@ -224,6 +225,7 @@ config ARCH_STRATIX10
 
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
+	select IRQ_FASTEOI_HIERARCHY_HANDLERS
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
diff --git linux-libre-5.4-gnu1/arch/arm64/Makefile linux-libre-5.4.261-gnu1/arch/arm64/Makefile
index 2c0238ce0551..d227cf87c48f 100644
--- linux-libre-5.4-gnu1/arch/arm64/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm64/Makefile
@@ -18,7 +18,7 @@ ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext -z norelro \
+LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
 			$(call ld-option, --no-apply-dynamic-relocs)
 endif
 
@@ -72,23 +72,31 @@ stack_protector_prepare: prepare0
 					include/generated/asm-offsets.h))
 endif
 
+# Ensure that if the compiler supports branch protection we default it
+# off.
+KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none)
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 CHECKFLAGS	+= -D__AARCH64EB__
 AS		+= -EB
 # Prefer the baremetal ELF build target, but not all toolchains include
 # it so fall back to the standard linux version if needed.
-KBUILD_LDFLAGS	+= -EB $(call ld-option, -maarch64elfb, -maarch64linuxb)
+KBUILD_LDFLAGS	+= -EB $(call ld-option, -maarch64elfb, -maarch64linuxb -z norelro)
 UTS_MACHINE	:= aarch64_be
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 CHECKFLAGS	+= -D__AARCH64EL__
 AS		+= -EL
 # Same as above, prefer ELF but fall back to linux target if needed.
-KBUILD_LDFLAGS	+= -EL $(call ld-option, -maarch64elf, -maarch64linux)
+KBUILD_LDFLAGS	+= -EL $(call ld-option, -maarch64elf, -maarch64linux -z norelro)
 UTS_MACHINE	:= aarch64
 endif
 
+ifeq ($(CONFIG_LD_IS_LLD), y)
+KBUILD_LDFLAGS	+= -z norelro
+endif
+
 CHECKFLAGS	+= -D__aarch64__
 
 ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
@@ -142,6 +150,8 @@ zinstall install:
 PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
+	$(if $(CONFIG_COMPAT_VDSO), \
+		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/Makefile linux-libre-5.4.261-gnu1/arch/arm64/boot/Makefile
index 1f012c506434..cd3414898d10 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/Makefile
@@ -16,7 +16,7 @@
 
 OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 
-targets := Image Image.gz
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/actions/s700.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/actions/s700.dtsi
index 2006ad5424fa..f8eb72bb4125 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/actions/s700.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/actions/s700.dtsi
@@ -231,7 +231,7 @@
 
 		pinctrl: pinctrl@e01b0000 {
 			compatible = "actions,s700-pinctrl";
-			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			reg = <0x0 0xe01b0000 0x0 0x100>;
 			clocks = <&cmu CLK_GPIO>;
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 136>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 208373efee49..7d1e89e5b1ae 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -127,7 +127,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
index 96ab0227e82d..121e6cc4849b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -15,7 +15,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	vqmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52edae4..393c1948a495 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -140,7 +140,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_aldo2>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dldo4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 04446e4716c4..963a7c505e30 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -78,7 +78,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "orangepi:green:status";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
 		};
@@ -129,7 +129,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 72d6961dc312..7eb252adf9f0 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -11,3 +11,7 @@
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
 };
+
+&mmc0 {
+	broken-cd;		/* card detect is broken on *some* boards */
+};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index d5b6e8159a33..5d0905f0f1c1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -52,7 +52,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	phy-handle = <&ext_rgmii_phy>;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 78c82a665c84..bb1de8217b86 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -103,8 +103,6 @@
 };
 
 &ehci0 {
-	phys = <&usbphy 0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
@@ -142,6 +140,7 @@
 	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
@@ -150,8 +149,6 @@
 };
 
 &ohci0 {
-	phys = <&usbphy 0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 9d20e13f0c02..19e5b7e298fd 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -55,10 +55,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	non-removable;
 	disable-wp;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 70f4cce6be43..cf9e3234afaf 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -142,6 +142,15 @@
 		clock-output-names = "ext-osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -218,7 +227,7 @@
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
@@ -467,7 +476,7 @@
 			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			max-frequency = <200000000>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -521,6 +530,8 @@
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>,
 				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -531,6 +542,8 @@
 			clocks = <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 57a6f45036c1..d7177465b096 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -114,7 +114,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index e126c1c9f05c..4d357b81b0c0 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -157,7 +157,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index d9b3ed257088..f10340339007 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -164,7 +164,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index db6ea7b58999..19f930f43936 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -72,7 +72,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index f002a496d7cb..8466d44ee0b1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -54,21 +54,21 @@
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <3>;
@@ -76,6 +76,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -146,8 +155,7 @@
 				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gp",
 					  "gpmmu",
 					  "pp",
@@ -158,8 +166,7 @@
 					  "pp2",
 					  "ppmmu2",
 					  "pp3",
-					  "ppmmu3",
-					  "pmu";
+					  "ppmmu3";
 			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 			clock-names = "bus", "core";
 			resets = <&ccu RST_BUS_GPU>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 1d05d570142f..0a04730960fc 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -83,7 +83,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_aldo2>;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 30102daf83cc..3f2882b36616 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -66,7 +66,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_aldo2>;
 	allwinner,rx-delay-ps = <200>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 0d5ea19336a1..1583cd591521 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -70,6 +70,15 @@
 		clock-output-names = "ext_osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -323,6 +332,7 @@
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -339,6 +349,7 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -355,6 +366,7 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -524,6 +536,8 @@
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>,
 				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -534,6 +548,8 @@
 			clocks = <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 144a2c19ac02..9498d1de730c 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -61,10 +61,10 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -77,7 +77,7 @@
 		method = "smc";
 	};
 
-	intc: intc@fffc1000 {
+	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -302,7 +302,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -445,7 +445,7 @@
 			clock-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 108 4>;
@@ -456,7 +456,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 109 4>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 66e4ffb4e929..33f1fb9fd161 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -129,7 +129,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
@@ -155,6 +155,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-axg.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 82919b106010..72255898081c 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -150,7 +150,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -159,7 +159,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1162,7 +1162,7 @@
 
 			toddr_a: audio-controller@100 {
 				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x100 0x0 0x1c>;
+				reg = <0x0 0x100 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "TODDR_A";
 				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
@@ -1173,7 +1173,7 @@
 
 			toddr_b: audio-controller@140 {
 				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x140 0x0 0x1c>;
+				reg = <0x0 0x140 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "TODDR_B";
 				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
@@ -1184,7 +1184,7 @@
 
 			toddr_c: audio-controller@180 {
 				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x180 0x0 0x1c>;
+				reg = <0x0 0x180 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "TODDR_C";
 				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
@@ -1195,7 +1195,7 @@
 
 			frddr_a: audio-controller@1c0 {
 				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x1c0 0x0 0x1c>;
+				reg = <0x0 0x1c0 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "FRDDR_A";
 				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
@@ -1206,7 +1206,7 @@
 
 			frddr_b: audio-controller@200 {
 				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x200 0x0 0x1c>;
+				reg = <0x0 0x200 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "FRDDR_B";
 				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
@@ -1217,7 +1217,7 @@
 
 			frddr_c: audio-controller@240 {
 				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x240 0x0 0x1c>;
+				reg = <0x0 0x240 0x0 0x2c>;
 				#sound-dai-cells = <0>;
 				sound-name-prefix = "FRDDR_C";
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
@@ -1705,7 +1705,7 @@
 			sd_emmc_b: sd@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1717,7 +1717,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -1728,18 +1728,18 @@
 		};
 
 		sram: sram@fffc0000 {
-			compatible = "amlogic,meson-axg-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xfffc0000 0x20000>;
 
-			cpu_scp_lpri: scp-shmem@13000 {
+			cpu_scp_lpri: scp-sram@13000 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@13400 {
+			cpu_scp_hpri: scp-sram@13400 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 3f39e020f74e..a31b623fedb7 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -76,6 +76,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -167,6 +173,8 @@
 				hwrng: rng@218 {
 					compatible = "amlogic,meson-rng";
 					reg = <0x0 0x218 0x0 0x4>;
+					clocks = <&clkc CLKID_RNG0>;
+					clock-names = "core";
 				};
 			};
 
@@ -1368,10 +1376,9 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
@@ -1509,7 +1516,7 @@
 				toddr_a: audio-controller@100 {
 					compatible = "amlogic,g12a-toddr",
 						     "amlogic,axg-toddr";
-					reg = <0x0 0x100 0x0 0x1c>;
+					reg = <0x0 0x100 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "TODDR_A";
 					interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
@@ -1521,7 +1528,7 @@
 				toddr_b: audio-controller@140 {
 					compatible = "amlogic,g12a-toddr",
 						     "amlogic,axg-toddr";
-					reg = <0x0 0x140 0x0 0x1c>;
+					reg = <0x0 0x140 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "TODDR_B";
 					interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
@@ -1533,7 +1540,7 @@
 				toddr_c: audio-controller@180 {
 					compatible = "amlogic,g12a-toddr",
 						     "amlogic,axg-toddr";
-					reg = <0x0 0x180 0x0 0x1c>;
+					reg = <0x0 0x180 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "TODDR_C";
 					interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
@@ -1545,7 +1552,7 @@
 				frddr_a: audio-controller@1c0 {
 					compatible = "amlogic,g12a-frddr",
 						     "amlogic,axg-frddr";
-					reg = <0x0 0x1c0 0x0 0x1c>;
+					reg = <0x0 0x1c0 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "FRDDR_A";
 					interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
@@ -1557,7 +1564,7 @@
 				frddr_b: audio-controller@200 {
 					compatible = "amlogic,g12a-frddr",
 						     "amlogic,axg-frddr";
-					reg = <0x0 0x200 0x0 0x1c>;
+					reg = <0x0 0x200 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "FRDDR_B";
 					interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
@@ -1569,7 +1576,7 @@
 				frddr_c: audio-controller@240 {
 					compatible = "amlogic,g12a-frddr",
 						     "amlogic,axg-frddr";
-					reg = <0x0 0x240 0x0 0x1c>;
+					reg = <0x0 0x240 0x0 0x2c>;
 					#sound-dai-cells = <0>;
 					sound-name-prefix = "FRDDR_C";
 					interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
@@ -1775,7 +1782,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					internal_ephy: ethernet_phy@8 {
+					internal_ephy: ethernet-phy@8 {
 						compatible = "ethernet-phy-id0180.3301",
 							     "ethernet-phy-ieee802.3-c22";
 						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2309,7 +2316,7 @@
 		sd_emmc_a: sd@ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2321,7 +2328,7 @@
 		sd_emmc_b: sd@ffe05000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe05000 0x0 0x800>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_B>,
 				 <&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2333,7 +2340,7 @@
 		sd_emmc_c: mmc@ffe07000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe07000 0x0 0x800>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_C>,
 				 <&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -2365,7 +2372,7 @@
 				reg = <0x0 0xff400000 0x0 0x40000>;
 				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-				clock-names = "ddr";
+				clock-names = "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
@@ -2380,7 +2387,8 @@
 				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
-				snps,quirk-frame-length-adjustment;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index c9fa23a56562..c76bf498ee38 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2a324f0136e3..02ec6eda03b1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 17155fb73fce..5209c44fda01 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -340,7 +340,7 @@
 		eee-broken-1000t;
 
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 
 		interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index eb5d177d7a99..c8c438c0b429 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -54,26 +54,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 554863429aa6..e2094575f528 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -152,6 +152,10 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
 &frddr_b {
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 046cc332d07f..f2543da63c39 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gx.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6733050d735f..e9f9ddd27ad7 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -41,6 +41,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -166,7 +172,7 @@
 			reg = <0x14 0x10>;
 		};
 
-		eth_mac: eth_mac@34 {
+		eth_mac: eth-mac@34 {
 			reg = <0x34 0x10>;
 		};
 
@@ -183,7 +189,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi_clocks@0 {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -345,20 +351,20 @@
 		};
 
 		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xc8000000 0x0 0x14000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xc8000000 0x14000>;
 
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
 		};
@@ -458,7 +464,7 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-			hwrng: rng {
+			hwrng: rng@0 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x0 0x0 0x4>;
 			};
@@ -522,21 +528,21 @@
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 233eb1cd7967..d94b695916a3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -165,7 +165,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 6039adda12ee..8828acb3fd4c 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -138,7 +138,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
@@ -296,7 +296,7 @@
 };
 
 &usb0_phy {
-	status = "okay";
+	status = "disabled";
 	phy-supply = <&usb_otg_pwr>;
 };
 
@@ -306,7 +306,7 @@
 };
 
 &usb0 {
-	status = "okay";
+	status = "disabled";
 };
 
 &usb1 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 43b11e3dfe11..29976215e144 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -126,7 +126,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 4c539881fbb7..e94f09c2d4e3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -64,6 +65,7 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -147,7 +149,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -157,6 +159,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
 };
 
 &hdmi_tx_tmds_port {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 82b1c4851147..e034bbff8e66 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index 3a1484e5b8e1..fbc687c9ff83 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
new file mode 100644
index 000000000000..f9d705648426
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&mali {
+	assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+			  <&clkc CLKID_MALI_0>,
+			  <&clkc CLKID_MALI>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_MALI_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>; /* Do Nothing */
+};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index b08c4537f260..b2ab05c22090 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -82,7 +82,7 @@
 
 		/* External PHY reset is shared with internal PHY Led signal */
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 		interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index b5667f1fb2c8..22fb3e324da5 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led {
 			label = "n1:white:status";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 2a5cd303123d..440bc23c7342 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -33,11 +33,9 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		power-button {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@@ -192,6 +190,9 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 49ff0a7d0210..6809f495a503 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -288,6 +288,11 @@
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
@@ -695,7 +700,7 @@
 		};
 	};
 
-	eth-phy-mux {
+	eth-phy-mux@55c {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index f25ddd18a607..c8a4205117f1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -251,7 +251,7 @@
 		reg = <0>;
 
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 		interrupt-parent = <&gpio_intc>;
@@ -327,7 +327,7 @@
 	#size-cells = <0>;
 
 	bus-width = <4>;
-	max-frequency = <50000000>;
+	max-frequency = <60000000>;
 
 	non-removable;
 	disable-wp;
@@ -395,7 +395,7 @@
 		#size-cells = <1>;
 		compatible = "winbond,w25q16", "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <3000000>;
+		spi-max-frequency = <104000000>;
 	};
 };
 
@@ -409,6 +409,9 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index c2bd4dbbf38c..8dccf91d68da 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -112,7 +112,7 @@
 		max-speed = <1000>;
 
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index ea45ae0c71b7..8edbfe040805 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -64,7 +64,7 @@
 
 		/* External PHY reset is shared with internal PHY Led signal */
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 
 		interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 5cd4d35006d0..f72d29e33a9e 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -114,7 +114,7 @@
 		max-speed = <1000>;
 
 		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
+		reset-deassert-us = <80000>;
 		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 8647da7d6609..f6694aad84db 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -43,13 +43,13 @@
 
 		white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 3435aaa4e8db..85fb59060cdf 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -164,14 +164,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
@@ -361,6 +353,9 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 521573f3a5ba..dd62a608c805 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,26 +55,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
@@ -90,7 +70,7 @@
 			opp-microvolt = <790000>;
 		};
 
-		opp-1512000000 {
+		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <800000>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
index 15fe81738e94..dfb23dfc0b0f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
@@ -8,7 +8,7 @@
 	gic: interrupt-controller@2c001000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x2c001000 0 0x1000>,
 		      <0x0 0x2c002000 0 0x2000>,
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
index f2c75c756039..906f51935b36 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
@@ -8,9 +8,9 @@
 	gic: interrupt-controller@2f000000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2f000000 0x100000>;
 		interrupt-controller;
 		reg =	<0x0 0x2f000000 0x0 0x10000>,
 			<0x0 0x2f100000 0x0 0x200000>,
@@ -22,7 +22,7 @@
 		its: its@2f020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
-			reg = <0x0 0x2f020000 0x0 0x20000>;
+			reg = <0x20000 0x20000>;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 3f78373f708a..05d1657170b4 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -107,51 +107,51 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
-		ethernet@2,02000000 {
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		ethernet@202000000 {
 			compatible = "smsc,lan91c111";
 			reg = <2 0x02000000 0x10000>;
 			interrupts = <15>;
@@ -178,7 +178,7 @@
 			clock-output-names = "v2m:refclk32khz";
 		};
 
-		iofpga@3,00000000 {
+		iofpga@300000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/fvp-base-revc.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 62ab0d54ff71..335fff762451 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -161,10 +161,10 @@
 		bus-range = <0x0 0x1>;
 		reg = <0x0 0x40000000 0x0 0x10000000>;
 		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
-		interrupt-map = <0 0 0 1 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &gic GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &gic GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 		msi-map = <0x0 &its 0x0 0x10000>;
 		iommu-map = <0x0 &smmu 0x0 0x10000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-base.dtsi
index 26a039a028b8..65bcdd0fe78a 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -6,7 +6,6 @@
 	/*
 	 *  Devices shared by all Juno boards
 	 */
-	dma-ranges = <0 0 0 0 0x100 0>;
 
 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
@@ -63,35 +62,35 @@
 		      <0x0 0x2c02f000 0 0x2000>,
 		      <0x0 0x2c04f000 0 0x2000>,
 		      <0x0 0x2c06f000 0 0x2000>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#interrupt-cells = <3>;
-		#size-cells = <2>;
+		#size-cells = <1>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
-		ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+		ranges = <0 0 0x2c1c0000 0x40000>;
 
 		v2m_0: v2m@0 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0 0 0x10000>;
+			reg = <0 0x10000>;
 		};
 
 		v2m@10000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x10000 0 0x10000>;
+			reg = <0x10000 0x10000>;
 		};
 
 		v2m@20000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x20000 0 0x10000>;
+			reg = <0x20000 0x10000>;
 		};
 
 		v2m@30000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x30000 0 0x10000>;
+			reg = <0x30000 0x10000>;
 		};
 	};
 
@@ -520,10 +519,10 @@
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 		msi-parent = <&v2m_0>;
 		status = "disabled";
 		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
@@ -538,13 +537,13 @@
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
@@ -552,7 +551,7 @@
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;
@@ -787,19 +786,19 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 15>;
-		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	site2: tlx@60000000 {
@@ -809,6 +808,6 @@
 		ranges = <0 0 0x60000000 0x10000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0>;
-		interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-clocks.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index e5e265dfa902..2870b5eeb198 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -8,10 +8,10 @@
  */
 / {
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7273800hz {
+	soc_uartclk: refclk7372800hz {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <7273800>;
+		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-motherboard.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 9f60dacb4f80..1234a8cfc0a9 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -103,7 +103,7 @@
 				};
 			};
 
-			flash@0,00000000 {
+			flash@0 {
 				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>;
@@ -120,7 +120,7 @@
 				};
 			};
 
-			ethernet@2,00000000 {
+			ethernet@200000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x00000000 0x10000>;
 				interrupts = <3>;
@@ -133,7 +133,7 @@
 				vddvario-supply = <&mb_fixed_3v3>;
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
index 57b0b9d7f3fa..29e6962c70bd 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -9,7 +9,7 @@
 		motherboard {
 			arm,v2m-memory-map = "rs2";
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				virtio-p9@140000 {
 					compatible = "virtio,mmio";
 					reg = <0x140000 0x200>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 03a7bf079c8f..ad20076357f5 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -17,14 +17,14 @@
 			#interrupt-cells = <1>;
 			ranges;
 
-			flash@0,00000000 {
+			flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>,
 				      <4 0x00000000 0x04000000>;
 				bank-width = <4>;
 			};
 
-			ethernet@2,02000000 {
+			ethernet@202000000 {
 				compatible = "smsc,lan91c111";
 				reg = <2 0x02000000 0x10000>;
 				interrupts = <15>;
@@ -51,7 +51,7 @@
 				clock-output-names = "v2m:refclk32khz";
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 15f7b0ed3836..edc1a8a4c4bc 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -687,7 +687,7 @@
 			};
 		};
 
-		sata: ahci@663f2000 {
+		sata: sata@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
 			dma-coherent;
@@ -745,7 +745,7 @@
 		};
 
 		qspi: spi@66470200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+			compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x66470200 0x184>,
 				<0x66470000 0x124>,
 				<0x67017408 0x004>,
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
index 55259f973b5a..5401a646c840 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -4,21 +4,26 @@
  */
 	usb {
 		compatible = "simple-bus";
-		dma-ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x68500000 0x00400000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
+
+		/*
+		 * Internally, USB bus to the interconnect can only address up
+		 * to 40-bit
+		 */
+		dma-ranges = <0 0 0 0 0x100 0x0>;
 
 		usbphy0: usb-phy@0 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00000000 0x100>;
+			reg = <0x0 0x00000000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		xhci0: usb@1000 {
 			compatible = "generic-xhci";
-			reg = <0x00001000 0x1000>;
+			reg = <0x0 0x00001000 0x0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 1>, <&usbphy0 0>;
 			phy-names = "phy0", "phy1";
@@ -28,7 +33,7 @@
 
 		bdc0: usb@2000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00002000 0x1000>;
+			reg = <0x0 0x00002000 0x0 0x1000>;
 			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0 0>, <&usbphy0 1>;
 			phy-names = "phy0", "phy1";
@@ -38,21 +43,21 @@
 
 		usbphy1: usb-phy@10000 {
 			compatible = "brcm,sr-usb-combo-phy";
-			reg = <0x00010000 0x100>;
+			reg = <0x0 0x00010000 0x0 0x100>;
 			#phy-cells = <1>;
 			status = "disabled";
 		};
 
 		usbphy2: usb-phy@20000 {
 			compatible = "brcm,sr-usb-hs-phy";
-			reg = <0x00020000 0x100>;
+			reg = <0x0 0x00020000 0x0 0x100>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
 
 		xhci1: usb@11000 {
 			compatible = "generic-xhci";
-			reg = <0x00011000 0x1000>;
+			reg = <0x0 0x00011000 0x0 0x1000>;
 			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
 			phy-names = "phy0", "phy1", "phy2";
@@ -62,7 +67,7 @@
 
 		bdc1: usb@21000 {
 			compatible = "brcm,bdc-v0.16";
-			reg = <0x00021000 0x1000>;
+			reg = <0x0 0x00021000 0x0 0x1000>;
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy2>;
 			phy-names = "phy0";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6f90b0e62cba..148bdca8d9c9 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -389,7 +389,7 @@
 	s2mps13-pmic@66 {
 		compatible = "samsung,s2mps13-pmic";
 		interrupt-parent = <&gpa0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		samsung,s2mps11-wrstbi-ground;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos5433.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index a76f620f7f35..a5f8752f607b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -18,8 +18,8 @@
 
 / {
 	compatible = "samsung,exynos5433";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	interrupt-parent = <&gic>;
 
@@ -311,7 +311,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
 			compatible = "samsung,exynos4210-chipid";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos7-espresso.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 080e0f56e108..09aead2be000 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -90,7 +90,7 @@
 	s2mps15_pmic@66 {
 		compatible = "samsung,s2mps15-pmic";
 		reg = <0x66>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpa0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq>;
@@ -157,6 +157,7 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos7.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos7.dtsi
index bcb9d8cee267..84f92b44c323 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -12,8 +12,8 @@
 / {
 	compatible = "samsung,exynos7";
 	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		pinctrl0 = &pinctrl_alive;
@@ -90,15 +90,17 @@
 	};
 
 	psci {
-		compatible = "arm,psci-0.2";
+		compatible = "arm,psci";
 		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xC4000003>;
 	};
 
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
 			compatible = "samsung,exynos4210-chipid";
@@ -111,7 +113,7 @@
 			#address-cells = <0>;
 			interrupt-controller;
 			reg =	<0x11001000 0x1000>,
-				<0x11002000 0x1000>,
+				<0x11002000 0x2000>,
 				<0x11004000 0x2000>,
 				<0x11006000 0x2000>;
 		};
@@ -494,13 +496,6 @@
 		pmu_system_controller: system-controller@105c0000 {
 			compatible = "samsung,exynos7-pmu", "syscon";
 			reg = <0x105c0000 0x5000>;
-
-			reboot: syscon-reboot {
-				compatible = "syscon-reboot";
-				regmap = <&pmu_system_controller>;
-				offset = <0x0400>;
-				mask = <0x1>;
-			};
 		};
 
 		rtc: rtc@10590000 {
@@ -650,3 +645,4 @@
 };
 
 #include "exynos7-pinctrl.dtsi"
+#include "arm/exynos-syscon-restart.dtsi"
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 337919366dc8..ec141c985289 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -177,6 +177,7 @@
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 078a5010228c..0b3a93c4155d 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -161,11 +161,6 @@
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -209,6 +204,15 @@
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..02ae6bfff565 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -65,7 +65,7 @@
 		};
 	};
 
-	sysclk: clock-sysclk {
+	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
@@ -102,8 +102,8 @@
 
 	reboot {
 		compatible ="syscon-reboot";
-		regmap = <&dcfg>;
-		offset = <0xb0>;
+		regmap = <&rst>;
+		offset = <0>;
 		mask = <0x02>;
 	};
 
@@ -151,14 +151,20 @@
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 		};
 
 		dcfg: syscon@1e00000 {
 			compatible = "fsl,ls1028a-dcfg", "syscon";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
-			big-endian;
+			little-endian;
+		};
+
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
 		};
 
 		scfg: syscon@1fc0000 {
@@ -281,6 +287,24 @@
 			status = "disabled";
 		};
 
+		can0: can@2180000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
@@ -490,14 +514,14 @@
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 15>, <&clockgen 4 15>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 15>, <&clockgen 4 15>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		sai1: audio-controller@f100000 {
@@ -567,7 +591,7 @@
 					       0x00010004 0x0000003d
 					       0x00010005 0x00000045
 					       0x00010006 0x0000004d
-					       0x00010007 0x00000045
+					       0x00010007 0x00000055
 					       0x00010008 0x0000005e
 					       0x00010009 0x00000066
 					       0x0001000a 0x0000006e
@@ -667,7 +691,7 @@
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
-				clocks = <&clockgen 4 0>;
+				clocks = <&clockgen 2 3>;
 				little-endian;
 			};
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 6082ae022136..d237162a8744 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -20,6 +20,8 @@
 };
 
 &fman0 {
+	fsl,erratum-a050385;
+
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 4223a2352d45..dde50c88f5e3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -119,12 +119,12 @@
 
 	ethernet@e4000 {
 		phy-handle = <&rgmii_phy1>;
-		phy-connection-type = "rgmii-txid";
+		phy-connection-type = "rgmii-id";
 	};
 
 	ethernet@e6000 {
 		phy-handle = <&rgmii_phy2>;
-		phy-connection-type = "rgmii-txid";
+		phy-connection-type = "rgmii-id";
 	};
 
 	ethernet@e8000 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index c084c7a4b6a6..b611d835dc25 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -241,6 +241,7 @@
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <0 75 0x4>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..2d6c73d7d397 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -83,15 +83,9 @@
 			};
 
 			eeprom@52 {
-				compatible = "atmel,24c512";
+				compatible = "onnn,cat24c04", "atmel,24c04";
 				reg = <0x52>;
 			};
-
-			eeprom@53 {
-				compatible = "atmel,24c512";
-				reg = <0x53>;
-			};
-
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 6a6514d0e5a9..8858c1e92f23 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -58,14 +58,9 @@
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c512";
+		compatible = "onnn,cat24c05", "atmel,24c04";
 		reg = <0x52>;
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c512";
-		reg = <0x53>;
-	};
 };
 
 &i2c3 {
@@ -127,12 +122,12 @@
 &fman0 {
 	ethernet@e4000 {
 		phy-handle = <&rgmii_phy1>;
-		phy-connection-type = "rgmii";
+		phy-connection-type = "rgmii-id";
 	};
 
 	ethernet@e6000 {
 		phy-handle = <&rgmii_phy2>;
-		phy-connection-type = "rgmii";
+		phy-connection-type = "rgmii-id";
 	};
 
 	ethernet@e8000 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index d4c1da3d4bde..ca087918c250 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -244,6 +244,7 @@
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
@@ -304,7 +305,7 @@
 
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1046a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c676d0771762..6b1b728de9e9 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -637,59 +637,59 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core2_watchdog: wdt@c020000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core3_watchdog: wdt@c030000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core2_watchdog: wdt@c120000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core3_watchdog: wdt@c130000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		fsl_mc: fsl-mc@80c000000 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa84a..4bf4a22faa61 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -227,59 +227,59 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster3_core0_watchdog: wdt@c200000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster3_core1_watchdog: wdt@c210000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster4_core0_watchdog: wdt@c300000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster4_core1_watchdog: wdt@c310000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-			clock-names = "apb_pclk", "wdog_clk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		crypto: crypto@8000000 {
@@ -501,7 +501,6 @@
 			clocks = <&clockgen 4 3>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
-			bus-num = <0>;
 		};
 
 		esdhc: esdhc@2140000 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm-evk.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index f7a15f3904c2..b9f8b7aac8ff 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -62,6 +62,8 @@
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
 		};
 
 		simple-audio-card,codec {
@@ -229,7 +231,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -237,7 +239,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index cffa8991880d..35a60b0d3a4f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -124,7 +124,7 @@
 #define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
@@ -585,7 +585,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a426642c51d5..3ed4a475d4d2 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -126,7 +126,7 @@
 
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <900000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;
@@ -479,14 +479,18 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>;
+						<&clk IMX8MM_VIDEO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL2>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
 				assigned-clock-rates = <0>,
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>;
+							<594000000>,
+							<393216000>,
+							<361267200>;
 			};
 
 			src: reset-controller@30390000 {
@@ -741,7 +745,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
@@ -834,10 +838,10 @@
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 11c705d225d0..4fa39654b695 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -213,6 +213,10 @@
 		interrupts = <3 GPIO_ACTIVE_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "BUCK1";
@@ -268,7 +272,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -276,7 +280,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mn.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index aae5486d779e..7f1d2d028d4d 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -616,7 +616,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MN_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
@@ -677,28 +677,6 @@
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
-
-			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
-				reg = <0x32e50000 0x200>;
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				status = "disabled";
-			};
-
-			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
-				#index-cells = <1>;
-				reg = <0x32e50200 0x200>;
-			};
-
 		};
 
 		dma_apbh: dma-controller@33000000 {
@@ -717,7 +695,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -747,12 +725,4 @@
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
 	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
-		clock-names = "main_clk";
-	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 683a11035643..19b427f68dad 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -421,7 +421,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_imu>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
 	};
@@ -743,6 +743,7 @@
 };
 
 &usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
index b94b02080a34..68e8fa172974 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
@@ -130,7 +130,7 @@
 #define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 32ce14936b01..f385b143b308 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -45,8 +45,8 @@
 	reg_12p0_main: regulator-12p0-main {
 		compatible = "regulator-fixed";
 		regulator-name = "12V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		regulator-always-on;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 80a6592368d4..2f7bf3a2d38f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -349,7 +349,7 @@
 			tmu: tmu@30260000 {
 				compatible = "fsl,imx8mq-tmu";
 				reg = <0x30260000 0x10000>;
-				interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
 				little-endian;
 				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
@@ -516,6 +516,7 @@
 			gpc: gpc@303a0000 {
 				compatible = "fsl,imx8mq-gpc";
 				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&gic>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
@@ -1055,6 +1056,14 @@
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
@@ -1084,6 +1093,14 @@
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 19468058e6ae..8148196902dd 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -52,11 +52,6 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..8c4bfbaf3a80 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -530,6 +530,17 @@
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi3660.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 253cc345f143..0c88b7209477 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1086,7 +1086,7 @@
 		};
 
 		watchdog0: watchdog@e8a06000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a06000 0x0 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>;
@@ -1094,7 +1094,7 @@
 		};
 
 		watchdog1: watchdog@e8a07000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a07000 0x0 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index c14205cd6bf5..3e47150c05ec 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -516,7 +516,7 @@
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi6220.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 108e2a4227f6..568faaba7ace 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -839,7 +839,7 @@
 		};
 
 		watchdog0: watchdog@f8005000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xf8005000 0x0 0x1000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ao_ctrl HI6220_WDT0_PCLK>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 36abc25320a8..19f17bb29e4b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -47,10 +47,10 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -82,7 +82,7 @@
 		ranges = <0 0 0 0xffffffff>;
 
 		gmac0: ethernet@ff800000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
 			reg = <0xff800000 0x2000>;
 			interrupts = <0 90 4>;
 			interrupt-names = "macirq";
@@ -97,7 +97,7 @@
 		};
 
 		gmac1: ethernet@ff802000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
 			reg = <0xff802000 0x2000>;
 			interrupts = <0 91 4>;
 			interrupt-names = "macirq";
@@ -112,7 +112,7 @@
 		};
 
 		gmac2: ethernet@ff804000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
 			reg = <0xff804000 0x2000>;
 			interrupts = <0 92 4>;
 			interrupt-names = "macirq";
@@ -369,7 +369,7 @@
 		};
 
 		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
 			interrupts = <0 93 4>;
 			phys = <&usbphy0>;
@@ -381,7 +381,7 @@
 		};
 
 		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb40000 0x40000>;
 			interrupts = <0 94 4>;
 			phys = <&usbphy0>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-db.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index f2cc00594d64..3e5789f37206 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -128,6 +128,9 @@
 
 /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
 &pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index fbcf03f86c96..a75bb2ea3506 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -19,6 +19,16 @@
 	model = "Globalscale Marvell ESPRESSOBin Board";
 	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
 
+	aliases {
+		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -49,6 +59,7 @@
 	phys = <&comphy1 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 };
 
 /* J6 */
@@ -141,7 +152,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			switch0port0: port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -152,19 +163,19 @@
 				};
 			};
 
-			port@1 {
+			switch0port1: port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			switch0port2: port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			switch0port3: port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 5f350cc71a2f..351e211afcf5 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -18,6 +18,7 @@
 
 	aliases {
 		spi0 = &spi0;
+		ethernet0 = &eth0;
 		ethernet1 = &eth1;
 	};
 
@@ -95,7 +96,7 @@
 	};
 
 	sfp: sfp {
-		compatible = "sff,sfp+";
+		compatible = "sff,sfp";
 		i2c-bus = <&i2c0>;
 		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
@@ -106,24 +107,30 @@
 		/* enabled by U-Boot if SFP module is present */
 		status = "disabled";
 	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
 };
 
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
+	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 0>; /* GPIO2_5 */
 	};
 };
 
-&pcie_reset_pins {
-	function = "gpio";
-};
-
 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
@@ -131,6 +138,28 @@
 	max-link-speed = <2>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	phys = <&comphy1 0>;
+	/*
+	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
+	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
+	 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+	 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
+	 */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x81000000 0 0xe8000000   0 0xe8000000   0 0x01000000   /* Port 0 IO */
+		  0x82000000 0 0xe9000000   0 0xe9000000   0 0x07000000>; /* Port 0 MEM */
 
 	/* enabled by U-Boot if PCIe module is present */
 	status = "disabled";
@@ -144,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii-id";
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -171,6 +200,8 @@
 	marvell,pad-type = "sd";
 	vqmmc-supply = <&vsdio_reg>;
 	mmc-pwrseq = <&sdhci1_pwrseq>;
+	/* forbid SDR104 for FCC purposes */
+	sdhci-caps-mask = <0x2 0x0>;
 	status = "okay";
 };
 
@@ -200,7 +231,7 @@
 			};
 
 			partition@20000 {
-				label = "u-boot";
+				label = "a53-firmware";
 				reg = <0x20000 0x160000>;
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index bd4aab6092e0..e31813a4f972 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -143,6 +143,7 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy1 0>;
 	sfp = <&sfp_eth0>;
 };
 
@@ -150,11 +151,14 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy0 1>;
 	sfp = <&sfp_eth1>;
 };
 
 &usb3 {
 	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
 };
 
 &uart0 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 000c135e39b7..9405d9c619ca 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -134,7 +134,7 @@
 
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
-				reg = <0x12000 0x200>;
+				reg = <0x12000 0x18>;
 				clocks = <&xtalclk>;
 				interrupts =
 				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -156,7 +156,8 @@
 			};
 
 			nb_periph_clk: nb-periph-clk@13000 {
-				compatible = "marvell,armada-3700-periph-clock-nb";
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;
@@ -317,7 +318,7 @@
 
 				pcie_reset_pins: pcie-reset-pins {
 					groups = "pcie1";
-					function = "pcie";
+					function = "gpio";
 				};
 
 				pcie_clkreq_pins: pcie-clkreq-pins {
@@ -486,8 +487,15 @@
 			#interrupt-cells = <1>;
 			msi-parent = <&pcie0>;
 			msi-controller;
-			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
-				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,
@@ -499,4 +507,12 @@
 			};
 		};
 	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index bd881497b872..b90d78a5724b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -367,6 +367,7 @@
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {
@@ -408,6 +409,8 @@
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
 			};
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index d250f4b2bfed..bf443ca1fcf1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -71,6 +71,7 @@
 		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -83,6 +84,7 @@
 		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth3: sfp-eth3 {
@@ -95,6 +97,7 @@
 		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 9024a2d9db07..62ae016ee6aa 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -21,6 +21,7 @@
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -28,6 +29,7 @@
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-cp110.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index d81944902650..8259fc8f86f2 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -438,10 +438,10 @@
 
 		CP110_LABEL(nand_controller): nand@720000 {
 			/*
-			* Due to the limitation of the pins available
-			* this controller is only usable on the CPM
-			* for A7K and on the CPS for A8K.
-			*/
+			 * Due to the limitation of the pins available
+			 * this controller is only usable on the CPM
+			 * for A7K and on the CPS for A8K.
+			 */
 			compatible = "marvell,armada-8k-nand-controller",
 				"marvell,armada370-nand-controller";
 			reg = <0x720000 0x54>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt2712-evb.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 2b91daf5c1a6..45e37aa67ce7 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -26,14 +26,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -50,7 +50,7 @@
 		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +59,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt2712e.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307bad3f0d..3b12bb313dcd 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -266,7 +266,7 @@
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt6797.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 2b2a69c7567f..d4c78c9672ff 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -102,7 +102,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 83e10591e0e5..81215cc3759a 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -49,7 +49,7 @@
 		wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt7622.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index dac51e98204c..3bfe9f5d2a14 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -428,6 +428,7 @@
 	pwm: pwm@11006000 {
 		compatible = "mediatek,mt7622-pwm";
 		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_PWM_SEL>,
 			 <&pericfg CLK_PERI_PWM_PD>,
@@ -686,6 +687,8 @@
 		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
 			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
 		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
+		reset-names = "hrst";
 		status = "disabled";
 	};
 
@@ -696,6 +699,8 @@
 		clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
 			 <&topckgen CLK_TOP_AXI_SEL>;
 		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>;
+		reset-names = "hrst";
 		status = "disabled";
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 15f1842f6df3..c4f742e6d160 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -238,21 +238,21 @@
 		cpu_on	      = <0x84000003>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32000>;
 		clock-output-names = "clk32k";
 	};
 
-	cpum_ck: oscillator@2 {
+	cpum_ck: oscillator2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
@@ -268,19 +268,19 @@
 			sustainable-power = <1500>; /* milliwatts */
 
 			trips {
-				threshold: trip-point@0 {
+				threshold: trip-point0 {
 					temperature = <68000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				target: trip-point@1 {
+				target: trip-point1 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit@0 {
+				cpu_crit: cpu_crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -288,13 +288,13 @@
 			};
 
 			cooling-maps {
-				map@0 {
+				map0 {
 					trip = <&target>;
 					cooling-device = <&cpu0 0 0>,
 							 <&cpu1 0 0>;
 					contribution = <3072>;
 				};
-				map@1 {
+				map1 {
 					trip = <&target>;
 					cooling-device = <&cpu2 0 0>,
 							 <&cpu3 0 0>;
@@ -308,7 +308,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region {
+		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -360,7 +360,7 @@
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@10005000 {
+		pio: pinctrl@1000b000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -567,7 +567,7 @@
 			status = "disabled";
 		};
 
-		gic: interrupt-controller@10220000 {
+		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
@@ -1137,7 +1137,7 @@
 				 <&mmsys CLK_MM_DSI1_DIGITAL>,
 				 <&mipi_tx1>;
 			clock-names = "engine", "digital", "hs";
-			phy = <&mipi_tx1>;
+			phys = <&mipi_tx1>;
 			phy-names = "dphy";
 			status = "disabled";
 		};
@@ -1397,8 +1397,8 @@
 				      "venc_lt_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
 					  <&topckgen CLK_TOP_VENC_LT_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
-						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>,
+						 <&topckgen CLK_TOP_VCODECPLL_370P5>;
 		};
 
 		vencltsys: clock-controller@19000000 {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra132.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 631a7f77c386..0b3eb8c0b8df 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -1082,13 +1082,13 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "nvidia,denver";
+			compatible = "nvidia,tegra132-denver";
 			reg = <0>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
-			compatible = "nvidia,denver";
+			compatible = "nvidia,tegra132-denver";
 			reg = <1>;
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index bdace01561ba..9df4782c90f3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -10,18 +10,6 @@
 	model = "NVIDIA Jetson TX2 Developer Kit";
 	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
 
-	aconnect {
-		status = "okay";
-
-		dma-controller@2930000 {
-			status = "okay";
-		};
-
-		interrupt-controller@2a40000 {
-			status = "okay";
-		};
-	};
-
 	i2c@3160000 {
 		power-monitor@42 {
 			compatible = "ti,ina3221";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra186.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 47cd831fcf44..445726275073 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -309,8 +309,9 @@
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03400000 0x0 0x10000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC1>;
@@ -335,8 +336,9 @@
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03420000 0x0 0x10000>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC2>;
@@ -356,8 +358,9 @@
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03440000 0x0 0x10000>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
 		reset-names = "sdhci";
 		iommus = <&smmu TEGRA186_SID_SDMMC3>;
@@ -379,8 +382,9 @@
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03460000 0x0 0x10000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
-		clock-names = "sdhci";
+		clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
 		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
 				  <&bpmp TEGRA186_CLK_PLLC4_VCO>;
 		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
@@ -705,7 +709,7 @@
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 4c38426a6969..7899759a12f8 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -32,7 +32,7 @@
 
 			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
 			phy-handle = <&phy>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 
 			mdio {
 				#address-cells = <1>;
@@ -309,9 +309,8 @@
 			regulator-name = "VDD_12V";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 			regulator-boot-on;
-			enable-active-low;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra194.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 3c0cf54f0aab..90adff8aa9ba 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -144,7 +144,7 @@
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
 					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
 					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-					nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
 					nvidia,tristate = <TEGRA_PIN_DISABLE>;
 					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				};
@@ -156,7 +156,7 @@
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
 					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
 					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-					nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
 					nvidia,tristate = <TEGRA_PIN_DISABLE>;
 					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				};
@@ -403,8 +403,9 @@
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03400000 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
@@ -425,8 +426,9 @@
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03440000 0x10000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
@@ -448,8 +450,9 @@
 			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03460000 0x10000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
 			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			assigned-clock-parents =
@@ -689,7 +692,7 @@
 
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
-			reg = <0x0c150000 0xa0000>;
+			reg = <0x0c150000 0x90000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
@@ -1151,7 +1154,7 @@
 	};
 
 	pcie@14100000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1192,12 +1195,12 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x30100000 0x0  0x30100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
 	pcie@14120000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1238,12 +1241,12 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x32100000 0x0  0x32100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
 	pcie@14140000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1284,12 +1287,12 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x34100000 0x0  0x34100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
 	pcie@14160000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1330,12 +1333,12 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x36100000 0x0  0x36100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1376,12 +1379,12 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
 	pcie@141a0000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1426,10 +1429,109 @@
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x3a100000 0x0  0x3a100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
+	pcie_ep@14160000 {
+		compatible = "nvidia,tegra194-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <4>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 4>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@14180000 {
+		compatible = "nvidia,tegra194-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 0>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
 	sysram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a7dc319214a4..b0095072bc28 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1612,7 +1612,7 @@
 			regulator-name = "VDD_HDMI_5V0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&exp1 12 GPIO_ACTIVE_LOW>;
+			gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			vin-supply = <&vdd_5v0_sys>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra210.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 659753118e96..8a02b26d07cd 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -917,6 +917,7 @@
 			 <&tegra_car 128>, /* hda2hdmi */
 			 <&tegra_car 111>; /* hda2codec_2x */
 		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		power-domains = <&pd_sor>;
 		status = "disabled";
 	};
 
@@ -1116,8 +1117,9 @@
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@@ -1144,8 +1146,9 @@
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-1v8-drv";
@@ -1161,8 +1164,9 @@
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@@ -1184,8 +1188,9 @@
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
-		clock-names = "sdhci";
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 04ad2fb22b9a..dba3488492f1 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -623,6 +623,8 @@
 				l21 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+					regulator-system-load = <200000>;
 				};
 				l22 {
 					regulator-min-microvolt = <3300000>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 70be3f95209b..830d9f2c1e5f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -20,7 +20,7 @@
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/ipq8074.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 67ee5f560104..1e9fa049c550 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -253,7 +253,7 @@
 			status = "disabled";
 		};
 
-		qpic_nand: nand@79b0000 {
+		qpic_nand: nand-controller@79b0000 {
 			compatible = "qcom,ipq8074-nand";
 			reg = <0x79b0000 0x10000>;
 			#address-cells = <1>;
@@ -482,7 +482,7 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 242aaea68804..38c0d74767e3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -508,7 +508,7 @@
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		cdc_pdm_lines_sus: pdm_lines_off {
@@ -521,7 +521,7 @@
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <2>;
-				bias-disable;
+				bias-pull-down;
 			};
 		};
 	};
@@ -537,7 +537,7 @@
 				pins = "gpio113", "gpio114", "gpio115",
 				       "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -565,7 +565,7 @@
 			pinconf {
 				pins = "gpio110";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -591,7 +591,7 @@
 			pinconf {
 				pins = "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_mclk_tlmm_lines_sus: mclk_lines_off {
@@ -619,7 +619,7 @@
 				pins = "gpio112", "gpio117", "gpio118",
 					"gpio119";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_sec_tlmm_lines_sus: tlmm_lines_off {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8916.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..bf40500adef7 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -16,8 +16,8 @@
 	#size-cells = <2>;
 
 	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 	};
 
 	chosen { };
@@ -53,7 +53,7 @@
 			no-map;
 		};
 
-		reserved@8668000 {
+		reserved@86680000 {
 			reg = <0x0 0x86680000 0x0 0x80000>;
 			no-map;
 		};
@@ -66,7 +66,7 @@
 			qcom,client-id = <1>;
 		};
 
-		rfsa@867e00000 {
+		rfsa@867e0000 {
 			reg = <0x0 0x867e0000 0x0 0x20000>;
 			no-map;
 		};
@@ -175,14 +175,14 @@
 	};
 
 	thermal-zones {
-		cpu0_1-thermal {
+		cpu0-1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu0_1_alert0: trip-point@0 {
+				cpu0_1_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -205,14 +205,14 @@
 			};
 		};
 
-		cpu2_3-thermal {
+		cpu2-3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
 			trips {
-				cpu2_3_alert0: trip-point@0 {
+				cpu2_3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -242,7 +242,7 @@
 			thermal-sensors = <&tsens 2>;
 
 			trips {
-				gpu_alert0: trip-point@0 {
+				gpu_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -262,7 +262,7 @@
 			thermal-sensors = <&tsens 1>;
 
 			trips {
-				cam_alert0: trip-point@0 {
+				cam_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -277,7 +277,7 @@
 			thermal-sensors = <&tsens 0>;
 
 			trips {
-				modem_alert0: trip-point@0 {
+				modem_alert0: trip-point0 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -934,7 +934,7 @@
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -966,7 +966,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
@@ -1451,7 +1451,7 @@
 			};
 		};
 
-		camss: camss@1b00000 {
+		camss: camss@1b0ac00 {
 			compatible = "qcom,msm8916-camss";
 			reg = <0x1b0ac00 0x200>,
 				<0x1b00030 0x4>,
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index a5f9a6ab512c..9b989cc30edc 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -30,3 +30,7 @@
 		};
 	};
 };
+
+&msmgpio {
+	gpio-reserved-ranges = <85 4>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8996.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 87f4d9c1b0d4..f1d3c51ea8d0 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1598,6 +1598,8 @@
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
@@ -1628,6 +1630,8 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
@@ -1677,16 +1681,16 @@
 				"csi_clk_mux",
 				"vfe0",
 				"vfe1";
-			interrupts = <GIC_SPI 78 0>,
-				<GIC_SPI 79 0>,
-				<GIC_SPI 80 0>,
-				<GIC_SPI 296 0>,
-				<GIC_SPI 297 0>,
-				<GIC_SPI 298 0>,
-				<GIC_SPI 299 0>,
-				<GIC_SPI 309 0>,
-				<GIC_SPI 314 0>,
-				<GIC_SPI 315 0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 				"csiphy1",
 				"csiphy2",
@@ -2094,9 +2098,6 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
-			qcom,gpu-quirk-two-pass-use-wfi;
-			qcom,gpu-quirk-fault-detect-mask;
-
 			operating-points-v2 = <&gpu_opp_table>;
 
 			gpu_opp_table: opp-table {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 9682d4dd7496..1bae90705746 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -23,6 +23,43 @@
 	};
 };
 
+/*
+ * The laptop FW does not appear to support the retention state as it is
+ * not advertised as enabled in ACPI, and enabling it in DT can cause boot
+ * hangs.
+ */
+&CPU0 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU1 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU2 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU3 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU4 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU5 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU6 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU7 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
 &qusb2phy {
 	status = "okay";
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 108667ce4f31..8d15572d18e6 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -27,6 +27,66 @@
 	status = "okay";
 };
 
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	status = "okay";
+};
+
+&funnel5 {
+	status = "okay";
+};
+
 &pm8005_lsid1 {
 	pm8005-regulators {
 		compatible = "qcom,pm8005-regulators";
@@ -51,6 +111,10 @@
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
 
+&replicator1 {
+	status = "okay";
+};
+
 &rpm_requests {
 	pm8998-regulators {
 		compatible = "qcom,rpm-pm8998-regulators";
@@ -249,6 +313,10 @@
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 };
 
+&stm {
+	status = "okay";
+};
+
 &ufshc {
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c6f81431983e..dcb79003ca0e 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -246,38 +246,42 @@
 			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <81>;
 				exit-latency-us = <86>;
-				min-residency-us = <200>;
+				min-residency-us = <504>;
 			};
 
 			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <273>;
-				exit-latency-us = <612>;
-				min-residency-us = <1000>;
+				entry-latency-us = <814>;
+				exit-latency-us = <4562>;
+				min-residency-us = <9183>;
 				local-timer-stop;
 			};
 
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <79>;
 				exit-latency-us = <82>;
-				min-residency-us = <200>;
+				min-residency-us = <1302>;
 			};
 
 			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <336>;
-				exit-latency-us = <525>;
-				min-residency-us = <1000>;
+				entry-latency-us = <724>;
+				exit-latency-us = <2027>;
+				min-residency-us = <9419>;
 				local-timer-stop;
 			};
 		};
@@ -985,7 +989,7 @@
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0x01f40000 0x20000>;
+			reg = <0x01f40000 0x40000>;
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -998,11 +1002,12 @@
 			#interrupt-cells = <0x2>;
 		};
 
-		stm@6002000 {
+		stm: stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
 			      <0x16280000 0x180000>;
 			reg-names = "stm-base", "stm-data-base";
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1016,9 +1021,10 @@
 			};
 		};
 
-		funnel@6041000 {
+		funnel1: funnel@6041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06041000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1045,9 +1051,10 @@
 			};
 		};
 
-		funnel@6042000 {
+		funnel2: funnel@6042000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06042000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1075,9 +1082,10 @@
 			};
 		};
 
-		funnel@6045000 {
+		funnel3: funnel@6045000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x06045000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1113,9 +1121,10 @@
 			};
 		};
 
-		replicator@6046000 {
+		replicator1: replicator@6046000 {
 			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
 			reg = <0x06046000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1137,9 +1146,10 @@
 			};
 		};
 
-		etf@6047000 {
+		etf: etf@6047000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0x06047000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1163,9 +1173,10 @@
 			};
 		};
 
-		etr@6048000 {
+		etr: etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0x06048000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1181,9 +1192,10 @@
 			};
 		};
 
-		etm@7840000 {
+		etm1: etm@7840000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07840000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1200,9 +1212,10 @@
 			};
 		};
 
-		etm@7940000 {
+		etm2: etm@7940000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07940000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1219,9 +1232,10 @@
 			};
 		};
 
-		etm@7a40000 {
+		etm3: etm@7a40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07a40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1238,9 +1252,10 @@
 			};
 		};
 
-		etm@7b40000 {
+		etm4: etm@7b40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07b40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1257,9 +1272,10 @@
 			};
 		};
 
-		funnel@7b60000 { /* APSS Funnel */
+		funnel4: funnel@7b60000 { /* APSS Funnel */
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07b60000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1343,9 +1359,10 @@
 			};
 		};
 
-		funnel@7b70000 {
+		funnel5: funnel@7b70000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x07b70000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1369,9 +1386,10 @@
 			};
 		};
 
-		etm@7c40000 {
+		etm5: etm@7c40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07c40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1385,9 +1403,10 @@
 			};
 		};
 
-		etm@7d40000 {
+		etm6: etm@7d40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07d40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1401,9 +1420,10 @@
 			};
 		};
 
-		etm@7e40000 {
+		etm7: etm@7e40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07e40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1417,9 +1437,10 @@
 			};
 		};
 
-		etm@7f40000 {
+		etm8: etm@7f40000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0x07f40000 0x1000>;
+			status = "disabled";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b6e304748a57..6f7dfcb8c042 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -17,7 +17,7 @@
 		#size-cells = <0>;
 
 		pon: power-on@800 {
-			compatible = "qcom,pm8916-pon";
+			compatible = "qcom,pm8998-pon";
 			reg = <0x0800>;
 			pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
@@ -73,18 +73,8 @@
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150b.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 322379d5c31f..40b5d75a4a1d 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -62,18 +62,8 @@
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150l.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index eb0e9a090e42..cf05e0685d10 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -56,18 +56,8 @@
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8916.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 9dd2df1cbf47..40df4d95a47a 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -113,7 +113,7 @@
 
 		wcd_codec: codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
-			reg = <0xf000 0x200>;
+			reg = <0xf000>;
 			reg-names = "pmic-codec-core";
 			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 			clock-names = "mclk";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 501a7330dbc8..522d3ef72df5 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -73,6 +73,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-name = "vdd_apc";
+		regulator-initial-mode = <1>;
 		regulator-min-microvolt = <1048000>;
 		regulator-max-microvolt = <1384000>;
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/qcs404.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/qcs404.dtsi
index a97eeb4569c0..1eb51b12cfac 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -533,7 +533,7 @@
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
-				 <&gcc 21>;
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
 			reset-names = "phy", "pipe";
 
 			clock-output-names = "pcie_0_pipe_clk";
@@ -991,12 +991,12 @@
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
 			clock-names = "iface", "aux", "master_bus", "slave_bus";
 
-			resets = <&gcc 18>,
-				 <&gcc 17>,
-				 <&gcc 15>,
-				 <&gcc 19>,
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE_0_BCR>,
-				 <&gcc 16>;
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
 			reset-names = "axi_m",
 				      "axi_s",
 				      "axi_m_sticky",
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 34881c0113cb..2b7923f1f0ec 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,6 +165,8 @@
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
+/delete-node/ &zap_shader;
+/delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
 &mpss_region {
@@ -1308,7 +1310,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-low;
 		};
@@ -1318,7 +1320,7 @@ ap_ts_i2c: &i2c14 {
 		config {
 			pins = "gpio126";
 			function = "gpio";
-			bias-no-pull;
+			bias-disable;
 			drive-strength = <2>;
 			output-high;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 74a32aa2011b..82f3eefba230 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -337,7 +337,9 @@
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
 };
 
 &pm8998_gpio {
@@ -517,6 +519,8 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-mtp.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index c57548b7b250..e5331a81249b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -468,6 +468,8 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f406a4340b05..ca77fc8aa75b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -715,6 +715,7 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
 		};
 
 		qfprom@784000 {
@@ -2824,7 +2825,7 @@
 
 			qcom,gmu = <&gmu>;
 
-			zap-shader {
+			zap_shader: zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index ded120d3aef5..5eb8f014c3f5 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -232,7 +232,9 @@
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
 };
 
 &i2c1 {
@@ -243,24 +245,23 @@
 &i2c3 {
 	status = "okay";
 	clock-frequency = <400000>;
+	/* Overwrite pinctrl-0 from sdm845.dtsi */
+	pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
 
-	hid@15 {
+	tsel: hid@15 {
 		compatible = "hid-over-i2c";
 		reg = <0x15>;
 		hid-descr-addr = <0x1>;
 
-		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	hid@2c {
+	tsc2: hid@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 
-		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_hid_active>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
@@ -268,15 +269,15 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	hid@10 {
+	tsc1: hid@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
 
-		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hid_active>;
+		pinctrl-0 = <&i2c5_hid_active>;
 	};
 };
 
@@ -284,7 +285,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	hid@5c {
+	ecsh: hid@5c {
 		compatible = "hid-over-i2c";
 		reg = <0x5c>;
 		hid-descr-addr = <0x1>;
@@ -292,13 +293,15 @@
 		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_hid_active>;
+		pinctrl-0 = <&i2c11_hid_active>;
 	};
 };
 
 &qup_i2c12_default {
-	drive-strength = <2>;
-	bias-disable;
+	pinmux {
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &qup_uart6_default {
@@ -335,7 +338,7 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	i2c2_hid_active: i2c2-hid-active {
+	i2c3_hid_active: i2c2-hid-active {
 		pins = <37>;
 		function = "gpio";
 
@@ -344,7 +347,7 @@
 		drive-strength = <2>;
 	};
 
-	i2c6_hid_active: i2c6-hid-active {
+	i2c5_hid_active: i2c5-hid-active {
 		pins = <125>;
 		function = "gpio";
 
@@ -353,7 +356,7 @@
 		drive-strength = <2>;
 	};
 
-	i2c12_hid_active: i2c12-hid-active {
+	i2c11_hid_active: i2c11-hid-active {
 		pins = <92>;
 		function = "gpio";
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 8f23fcadecb8..1954cef8c6f0 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -336,7 +336,7 @@
 			      <0x0 0x03D00000 0x0 0x300000>;
 			reg-names = "west", "east", "north", "south";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&tlmm 0 0 175>;
+			gpio-ranges = <&tlmm 0 0 176>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -459,9 +459,9 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>,
-					  <SLEEP_TCS   1>,
-					  <WAKE_TCS    1>,
-					  <CONTROL_TCS 0>;
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/cat875.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/cat875.dtsi
index aaefc3ae56d5..dbdb8b093e73 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -22,7 +22,6 @@
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/hihope-common.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 3e376d29a730..69585d6e3653 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -86,7 +86,7 @@
 
 		label = "rcar-sound";
 
-		dais = <&rsnd_port0>;
+		dais = <&rsnd_port>;
 	};
 
 	vbus0_usb2: regulator-vbus0-usb2 {
@@ -191,7 +191,7 @@
 		port@2 {
 			reg = <2>;
 			dw_hdmi0_snd_in: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
+				remote-endpoint = <&rsnd_endpoint>;
 			};
 		};
 	};
@@ -327,17 +327,15 @@
 	/* Single DAI */
 	#sound-dai-cells = <0>;
 
-	ports {
-		rsnd_port0: port@0 {
-			rsnd_endpoint0: endpoint {
-				remote-endpoint = <&dw_hdmi0_snd_in>;
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
 
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint0>;
-				frame-master = <&rsnd_endpoint0>;
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
 
-				playback = <&ssi2>;
-			};
+			playback = <&ssi2>;
 		};
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 4280b190dc68..6a001cdfd38e 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -23,7 +23,6 @@
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a774a1.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 06c7c849c8ab..c2a7ec3fc209 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1726,17 +1726,6 @@
 				      "ssi.1", "ssi.0";
 			status = "disabled";
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-				};
-				port@1 {
-					reg = <1>;
-				};
-			};
-
 			rcar_sound,ctu {
 				ctu00: ctu-0 { };
 				ctu01: ctu-1 { };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a774c0.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index a1c2de90e470..1de7891c658c 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -49,17 +49,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -1212,9 +1209,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index d7c7b9156e08..5c391248ddb3 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -59,7 +59,7 @@
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
+		reg = <0x0 0x48000000 0x0 0x78000000>;
 	};
 
 	osc5_clk: osc5-clock {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77970.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 0cd3b376635d..4952981bb6ba 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -652,7 +652,7 @@
 		};
 
 		pwm3: pwm@e6e33000 {
-			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
 			reg = <0 0xe6e33000 0 8>;
 			#pwm-cells = <2>;
 			clocks = <&cpg CPG_MOD 523>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77980.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 461a47ea656d..4b9d4f1bbe01 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -990,8 +990,8 @@
 
 					reg = <1>;
 
-					vin4csi41: endpoint@2 {
-						reg = <2>;
+					vin4csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin4>;
 					};
 				};
@@ -1018,8 +1018,8 @@
 
 					reg = <1>;
 
-					vin5csi41: endpoint@2 {
-						reg = <2>;
+					vin5csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin5>;
 					};
 				};
@@ -1046,8 +1046,8 @@
 
 					reg = <1>;
 
-					vin6csi41: endpoint@2 {
-						reg = <2>;
+					vin6csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin6>;
 					};
 				};
@@ -1074,8 +1074,8 @@
 
 					reg = <1>;
 
-					vin7csi41: endpoint@2 {
-						reg = <2>;
+					vin7csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin7>;
 					};
 				};
@@ -1318,6 +1318,7 @@
 		ipmmu_vip0: mmu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
@@ -1325,6 +1326,7 @@
 		ipmmu_vip1: mmu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index b38f9d442fc0..e6d700f8c194 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -636,7 +636,6 @@
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
 	clock-frequency = <12288000 11289600>;
-	clkout-lr-synchronous;
 
 	status = "okay";
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77990.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 455954c3d98e..82efc8a3627d 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -60,17 +60,14 @@
 		opp-shared;
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <820000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -1168,9 +1165,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77995-draak.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 67634cb01d6b..cbdd46ed3ca6 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -277,10 +277,6 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
-		/* Depends on LVDS */
-		max-clock = <135000000>;
-		min-vrefresh = <50>;
-
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 202177706cde..df00acb35263 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -269,7 +269,7 @@
 	};
 
 	scif1_pins: scif1 {
-		groups = "scif1_data_b", "scif1_ctrl";
+		groups = "scif1_data_b";
 		function = "scif1";
 	};
 
@@ -329,7 +329,6 @@
 &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
-	uart-has-rtscts;
 
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/ulcb.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 3ef89171538f..d8fccf3d4987 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -470,6 +470,7 @@
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/px30.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/px30.dtsi
index eb992d60e6ba..f297601c9f71 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -213,20 +213,20 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -234,7 +234,7 @@
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -247,14 +247,14 @@
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -270,7 +270,7 @@
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -281,7 +281,7 @@
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
@@ -768,7 +768,7 @@
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -783,7 +783,7 @@
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -798,7 +798,7 @@
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		power-domains = <&power PX30_PD_MMC_NAND>;
@@ -860,7 +860,7 @@
 	vopl_mmu: iommu@ff470f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff470f00 0x0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
 		clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
 		clock-names = "aclk", "hclk";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-evb.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 49c4b96da3d4..05265b38cc02 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -86,13 +86,13 @@
 	assigned-clock-rate = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+	status = "okay";
 };
 
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index bb40c163b05d..fbd942b46c54 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -90,7 +90,6 @@
 			linux,default-trigger = "heartbeat";
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
 			default-state = "on";
-			mode = <0x23>;
 		};
 
 		user {
@@ -98,7 +97,6 @@
 			linux,default-trigger = "mmc1";
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
-			mode = <0x05>;
 		};
 	};
 };
@@ -333,6 +331,7 @@
 };
 
 &usb20_otg {
+	dr_mode = "host";
 	status = "okay";
 };
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 62936b432f9a..304fad1a0b57 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -169,7 +169,7 @@
 &i2c1 {
 	status = "okay";
 
-	rk805: rk805@18 {
+	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
 		interrupt-parent = <&gpio2>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 31cc1541f1f5..6ddb6b8c1fad 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -270,13 +270,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pd_hevc@RK3328_PD_HEVC {
+			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 			};
-			pd_video@RK3328_PD_VIDEO {
+			power-domain@RK3328_PD_VIDEO {
 				reg = <RK3328_PD_VIDEO>;
 			};
-			pd_vpu@RK3328_PD_VPU {
+			power-domain@RK3328_PD_VPU {
 				reg = <RK3328_PD_VPU>;
 				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 			};
@@ -555,7 +555,7 @@
 
 	gpu: gpu@ff300000 {
 		compatible = "rockchip,rk3328-mali", "arm,mali-450";
-		reg = <0x0 0xff300000 0x0 0x40000>;
+		reg = <0x0 0xff300000 0x0 0x30000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
@@ -1190,8 +1190,8 @@
 
 		uart0 {
 			uart0_xfer: uart0-xfer {
-				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
-						<1 RK_PB0 1 &pcfg_pull_none>;
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB0 1 &pcfg_pull_up>;
 			};
 
 			uart0_cts: uart0-cts {
@@ -1209,8 +1209,8 @@
 
 		uart1 {
 			uart1_xfer: uart1-xfer {
-				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
-						<3 RK_PA6 4 &pcfg_pull_none>;
+				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+						<3 RK_PA6 4 &pcfg_pull_up>;
 			};
 
 			uart1_cts: uart1-cts {
@@ -1228,15 +1228,15 @@
 
 		uart2-0 {
 			uart2m0_xfer: uart2m0-xfer {
-				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
-						<1 RK_PA1 2 &pcfg_pull_none>;
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+						<1 RK_PA1 2 &pcfg_pull_up>;
 			};
 		};
 
 		uart2-1 {
 			uart2m1_xfer: uart2m1-xfer {
-				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
-						<2 RK_PA1 1 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+						<2 RK_PA1 1 &pcfg_pull_up>;
 			};
 		};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index e17311e09082..216aafd90e7f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -156,7 +156,7 @@
 	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
 	tx_delay = <0x10>;
 	rx_delay = <0x10>;
 	status = "okay";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c706db0ee9ec..5b7e8fbf1ffe 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -666,12 +666,15 @@
 	sd-uhs-sdr104;
 
 	/* Power supply */
-	vqmmc-supply = &vcc1v8_s3;	/* IO line */
-	vmmc-supply = &vcc_sdio;	/* card's power */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index a9f4d6d7d2b7..586351340da6 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -77,3 +77,8 @@
 		};
 	};
 };
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 7cd6d470c1cb..7416db3d27a7 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -237,6 +237,14 @@
 &edp {
 	status = "okay";
 
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
 	ports {
 		edp_out: port@1 {
 			reg = <1>;
@@ -397,6 +405,7 @@ ap_i2c_tp: &i2c5 {
 	};
 
 	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
 		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 	};
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index dd5624975c9b..b7e7bb3517c0 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -281,7 +281,7 @@
 
 	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &i2s2>;
+		rockchip,cpu = <&i2s0 &spdif>;
 	};
 };
 
@@ -432,10 +432,6 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
-&i2s2 {
-	status = "okay";
-};
-
 &io_domains {
 	status = "okay";
 
@@ -532,6 +528,17 @@ ap_i2c_audio: &i2c8 {
 	vqmmc-supply = <&ppvar_sd_card_io>;
 };
 
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
 &spi1 {
 	status = "okay";
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 4944d78a0a1c..292ca70c512b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -654,9 +654,12 @@
 	sd-uhs-sdr104;
 	vqmmc-supply = <&vcc1v8_s3>;
 	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -682,7 +685,6 @@
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 73be38a53796..a72e77c261ef 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -49,7 +49,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vim-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc3v3_sys>;
 	};
 
 	vcc3v3_sys: vcc3v3-sys {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 2a127985ab17..d3ed8e5e770f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -94,33 +94,6 @@
 	};
 };
 
-&gpu_thermal {
-	trips {
-		gpu_warm: gpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		gpu_hot: gpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-	cooling-maps {
-		map1 {
-			trip = <&gpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map2 {
-			trip = <&gpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
 &pinctrl {
 	ir {
 		ir_rx: ir-rx {
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 0541dfce924d..9c659f3115c8 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -648,9 +648,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index d80d6b726820..d29937e4a606 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -203,7 +203,7 @@
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <150000000>;
+	max-frequency = <40000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc3v3_baseboard>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 62ea288a1a70..365fa9a3c5bf 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -101,8 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
-		enable-active-low;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
@@ -157,7 +156,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
@@ -467,6 +466,12 @@
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 1ae1ebd4efdd..79d04a664b82 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -441,7 +441,6 @@
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {
@@ -452,7 +451,7 @@
 	status = "okay";
 
 	bt656-supply = <&vcc_3v0>;
-	audio-supply = <&vcc_3v0>;
+	audio-supply = <&vcc1v8_codec>;
 	sdmmc-supply = <&vcc_sdio>;
 	gpio1830-supply = <&vcc_3v0>;
 };
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index cede1ad81be2..4496f7e1c68f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -29,6 +29,9 @@
 		i2c6 = &i2c6;
 		i2c7 = &i2c7;
 		i2c8 = &i2c8;
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -229,6 +232,7 @@
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -247,7 +251,6 @@
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
@@ -410,7 +413,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -446,7 +449,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1444,6 +1447,7 @@
 			reg = <0xf780 0x24>;
 			clocks = <&sdhci>;
 			clock-names = "emmcclk";
+			drive-impedance-ohm = <50>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
@@ -1454,7 +1458,6 @@
 			clock-names = "refclk";
 			#phy-cells = <1>;
 			resets = <&cru SRST_PCIEPHY>;
-			drive-impedance-ohm = <50>;
 			reset-names = "phy";
 			status = "disabled";
 		};
@@ -1743,10 +1746,10 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
@@ -1881,10 +1884,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
@@ -2314,7 +2317,7 @@
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index b658f2b641e2..3348a32f7d0b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -718,7 +718,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6f6cee4d549..b793a43e0612 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -509,7 +509,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -530,7 +530,7 @@
 			clocks = <&sys_clk 7>;
 			reset-names = "ether";
 			resets = <&sys_rst 7>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 1>;
 
@@ -544,8 +544,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -646,8 +646,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-am65-main.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..34a30842c47a 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -307,6 +307,7 @@
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -346,6 +347,7 @@
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 698ef9a1d5b7..96445111e398 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -43,6 +43,7 @@
 	smmu0: smmu@36600000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0x36600000 0x0 0x100000>;
+		power-domains = <&k3_pds 229 TI_SCI_PD_EXCLUSIVE>;
 		interrupt-parent = <&gic500>;
 		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
 			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-j721e.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 43ea1ba97922..5a6e74636d6f 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -60,7 +60,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -74,7 +74,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -84,7 +84,7 @@
 		cache-level = <2>;
 		cache-size = <0x100000>;
 		cache-line-size = <64>;
-		cache-sets = <2048>;
+		cache-sets = <1024>;
 		next-level-cache = <&msmc_l3>;
 	};
 
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 2421ec71a201..41a66787247b 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -131,7 +131,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi0-data";
 			reg = <0x0 0x100000>;
 		};
 	};
@@ -149,7 +149,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi1-data";
 			reg = <0x0 0x84000>;
 		};
 	};
diff --git linux-libre-5.4-gnu1/arch/arm64/boot/dts/xilinx/zynqmp.dtsi linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 9aa67340a4d8..b92549fb3240 100644
--- linux-libre-5.4-gnu1/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ linux-libre-5.4.261-gnu1/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -419,7 +419,7 @@
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -429,7 +429,7 @@
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
@@ -582,7 +582,7 @@
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -591,7 +591,7 @@
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/Kconfig linux-libre-5.4.261-gnu1/arch/arm64/crypto/Kconfig
index 4922c4451e7c..99cddf1145c2 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/Kconfig
@@ -59,6 +59,7 @@ config CRYPTO_GHASH_ARM64_CE
 	select CRYPTO_HASH
 	select CRYPTO_GF128MUL
 	select CRYPTO_LIB_AES
+	select CRYPTO_AEAD
 
 config CRYPTO_CRCT10DIF_ARM64_CE
 	tristate "CRCT10DIF digest algorithm using PMULL instructions"
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/aes-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/aes-glue.c
index aa57dc639f77..aa13344a3a5e 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/aes-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/aes-glue.c
@@ -55,7 +55,7 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 #define aes_mac_update		neon_aes_mac_update
 MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 NEON");
 #endif
-#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS)
+#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS)
 MODULE_ALIAS_CRYPTO("ecb(aes)");
 MODULE_ALIAS_CRYPTO("cbc(aes)");
 MODULE_ALIAS_CRYPTO("ctr(aes)");
@@ -668,7 +668,7 @@ static int __maybe_unused xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS)
+#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS)
 	.base = {
 		.cra_name		= "__ecb(aes)",
 		.cra_driver_name	= "__ecb-aes-" MODE,
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/aes-neonbs-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/aes-neonbs-glue.c
index ea873b8904c4..e3e27349a9fe 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/aes-neonbs-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/aes-neonbs-glue.c
@@ -384,7 +384,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 			goto xts_tail;
 
 		kernel_neon_end();
-		skcipher_walk_done(&walk, nbytes);
+		err = skcipher_walk_done(&walk, nbytes);
 	}
 
 	if (err || likely(!tail))
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/ghash-ce-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/ghash-ce-glue.c
index 70b1469783f9..24bc0a3f26e2 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/ghash-ce-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/ghash-ce-glue.c
@@ -261,7 +261,7 @@ static int ghash_setkey(struct crypto_shash *tfm,
 static struct shash_alg ghash_alg[] = {{
 	.base.cra_name		= "ghash",
 	.base.cra_driver_name	= "ghash-neon",
-	.base.cra_priority	= 100,
+	.base.cra_priority	= 150,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key),
 	.base.cra_module	= THIS_MODULE,
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/nhpoly1305-neon-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/nhpoly1305-neon-glue.c
index 895d3727c1fb..c5405e6a6db7 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/nhpoly1305-neon-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/nhpoly1305-neon-glue.c
@@ -30,7 +30,7 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 		return crypto_nhpoly1305_update(desc, src, srclen);
 
 	do {
-		unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE);
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
 		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/sha1-ce-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha1-ce-glue.c
index bdc1b6d7aff7..05cdad31b022 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/sha1-ce-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha1-ce-glue.c
@@ -19,6 +19,7 @@
 MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha1");
 
 struct sha1_ce_state {
 	struct sha1_state	sst;
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/sha2-ce-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha2-ce-glue.c
index 604a01a4ede6..1de80293ac31 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/sha2-ce-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha2-ce-glue.c
@@ -19,6 +19,8 @@
 MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
 
 struct sha256_ce_state {
 	struct sha256_state	sst;
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/sha3-ce-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha3-ce-glue.c
index 9a4bbfc45f40..ddf7aca9ff45 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/sha3-ce-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha3-ce-glue.c
@@ -23,6 +23,10 @@
 MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha3-224");
+MODULE_ALIAS_CRYPTO("sha3-256");
+MODULE_ALIAS_CRYPTO("sha3-384");
+MODULE_ALIAS_CRYPTO("sha3-512");
 
 asmlinkage void sha3_ce_transform(u64 *st, const u8 *data, int blocks,
 				  int md_len);
diff --git linux-libre-5.4-gnu1/arch/arm64/crypto/sha512-ce-glue.c linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha512-ce-glue.c
index 2369540040aa..6dfcb4f3e776 100644
--- linux-libre-5.4-gnu1/arch/arm64/crypto/sha512-ce-glue.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/crypto/sha512-ce-glue.c
@@ -23,6 +23,8 @@
 MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
 
 asmlinkage void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
 				    int blocks);
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/acpi.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/acpi.h
index b263e239cb59..a45366c3909b 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/acpi.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/acpi.h
@@ -12,6 +12,7 @@
 #include <linux/efi.h>
 #include <linux/memblock.h>
 #include <linux/psci.h>
+#include <linux/stddef.h>
 
 #include <asm/cputype.h>
 #include <asm/io.h>
@@ -31,14 +32,14 @@
  * is therefore used to delimit the MADT GICC structure minimum length
  * appropriately.
  */
-#define ACPI_MADT_GICC_MIN_LENGTH   ACPI_OFFSET(  \
+#define ACPI_MADT_GICC_MIN_LENGTH   offsetof(  \
 	struct acpi_madt_generic_interrupt, efficiency_class)
 
 #define BAD_MADT_GICC_ENTRY(entry, end)					\
 	(!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
 	(unsigned long)(entry) + (entry)->header.length > (end))
 
-#define ACPI_MADT_GICC_SPE  (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \
+#define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
 	spe_interrupt) + sizeof(u16))
 
 /* Basic configuration for ACPI */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/alternative.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/alternative.h
index b9f8d787eea9..3cb3c4ab3ea5 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/alternative.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/alternative.h
@@ -35,13 +35,16 @@ void apply_alternatives_module(void *start, size_t length);
 static inline void apply_alternatives_module(void *start, size_t length) { }
 #endif
 
-#define ALTINSTR_ENTRY(feature,cb)					      \
+#define ALTINSTR_ENTRY(feature)					              \
 	" .word 661b - .\n"				/* label           */ \
-	" .if " __stringify(cb) " == 0\n"				      \
 	" .word 663f - .\n"				/* new instruction */ \
-	" .else\n"							      \
+	" .hword " __stringify(feature) "\n"		/* feature bit     */ \
+	" .byte 662b-661b\n"				/* source len      */ \
+	" .byte 664f-663f\n"				/* replacement len */
+
+#define ALTINSTR_ENTRY_CB(feature, cb)					      \
+	" .word 661b - .\n"				/* label           */ \
 	" .word " __stringify(cb) "- .\n"		/* callback */	      \
-	" .endif\n"							      \
 	" .hword " __stringify(feature) "\n"		/* feature bit     */ \
 	" .byte 662b-661b\n"				/* source len      */ \
 	" .byte 664f-663f\n"				/* replacement len */
@@ -62,33 +65,40 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
  *
  * Alternatives with callbacks do not generate replacement instructions.
  */
-#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled, cb)	\
+#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled)	\
 	".if "__stringify(cfg_enabled)" == 1\n"				\
 	"661:\n\t"							\
 	oldinstr "\n"							\
 	"662:\n"							\
 	".pushsection .altinstructions,\"a\"\n"				\
-	ALTINSTR_ENTRY(feature,cb)					\
+	ALTINSTR_ENTRY(feature)						\
 	".popsection\n"							\
-	" .if " __stringify(cb) " == 0\n"				\
-	".pushsection .altinstr_replacement, \"a\"\n"			\
+	".subsection 1\n"						\
 	"663:\n\t"							\
 	newinstr "\n"							\
 	"664:\n\t"							\
-	".popsection\n\t"						\
 	".org	. - (664b-663b) + (662b-661b)\n\t"			\
-	".org	. - (662b-661b) + (664b-663b)\n"			\
-	".else\n\t"							\
+	".org	. - (662b-661b) + (664b-663b)\n\t"			\
+	".previous\n"							\
+	".endif\n"
+
+#define __ALTERNATIVE_CFG_CB(oldinstr, feature, cfg_enabled, cb)	\
+	".if "__stringify(cfg_enabled)" == 1\n"				\
+	"661:\n\t"							\
+	oldinstr "\n"							\
+	"662:\n"							\
+	".pushsection .altinstructions,\"a\"\n"				\
+	ALTINSTR_ENTRY_CB(feature, cb)					\
+	".popsection\n"							\
 	"663:\n\t"							\
 	"664:\n\t"							\
-	".endif\n"							\
 	".endif\n"
 
 #define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...)	\
-	__ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg), 0)
+	__ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg))
 
 #define ALTERNATIVE_CB(oldinstr, cb) \
-	__ALTERNATIVE_CFG(oldinstr, "NOT_AN_INSTRUCTION", ARM64_CB_PATCH, 1, cb)
+	__ALTERNATIVE_CFG_CB(oldinstr, ARM64_CB_PATCH, 1, cb)
 #else
 
 #include <asm/assembler.h>
@@ -107,11 +117,11 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 662:	.pushsection .altinstructions, "a"
 	altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 663:	\insn2
-664:	.popsection
-	.org	. - (664b-663b) + (662b-661b)
+664:	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
+	.previous
 	.endif
 .endm
 
@@ -150,7 +160,7 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 	.pushsection .altinstructions, "a"
 	altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.align 2	/* So GAS knows label 661 is suitably aligned */
 661:
 .endm
@@ -169,9 +179,9 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 .macro alternative_else
 662:
 	.if .Lasm_alt_mode==0
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.else
-	.popsection
+	.previous
 	.endif
 663:
 .endm
@@ -181,11 +191,11 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
  */
 .macro alternative_endif
 664:
-	.if .Lasm_alt_mode==0
-	.popsection
-	.endif
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
+	.if .Lasm_alt_mode==0
+	.previous
+	.endif
 .endm
 
 /*
@@ -211,7 +221,7 @@ alternative_endif
 
 .macro user_alt, label, oldinstr, newinstr, cond
 9999:	alternative_insn "\oldinstr", "\newinstr", \cond
-	_ASM_EXTABLE 9999b, \label
+	_asm_extable 9999b, \label
 .endm
 
 /*
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/arch_gicv3.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/arch_gicv3.h
index 89e4c8b79349..ee9bdaa40532 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/arch_gicv3.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/arch_gicv3.h
@@ -109,7 +109,7 @@ static inline u32 gic_read_pmr(void)
 	return read_sysreg_s(SYS_ICC_PMR_EL1);
 }
 
-static inline void gic_write_pmr(u32 val)
+static __always_inline void gic_write_pmr(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_PMR_EL1);
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/arch_timer.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/arch_timer.h
index 7ae54d7d333a..88d20f04c64a 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/arch_timer.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/arch_timer.h
@@ -58,6 +58,7 @@ struct arch_timer_erratum_workaround {
 	u64 (*read_cntvct_el0)(void);
 	int (*set_next_event_phys)(unsigned long, struct clock_event_device *);
 	int (*set_next_event_virt)(unsigned long, struct clock_event_device *);
+	bool disable_compat_vdso;
 };
 
 DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *,
@@ -164,25 +165,6 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
 	isb();
 }
 
-/*
- * Ensure that reads of the counter are treated the same as memory reads
- * for the purposes of ordering by subsequent memory barriers.
- *
- * This insanity brought to you by speculative system register reads,
- * out-of-order memory accesses, sequence locks and Thomas Gleixner.
- *
- * http://lists.infradead.org/pipermail/linux-arm-kernel/2019-February/631195.html
- */
-#define arch_counter_enforce_ordering(val) do {				\
-	u64 tmp, _val = (val);						\
-									\
-	asm volatile(							\
-	"	eor	%0, %1, %1\n"					\
-	"	add	%0, sp, %0\n"					\
-	"	ldr	xzr, [%0]"					\
-	: "=r" (tmp) : "r" (_val));					\
-} while (0)
-
 static __always_inline u64 __arch_counter_get_cntpct_stable(void)
 {
 	u64 cnt;
@@ -223,8 +205,6 @@ static __always_inline u64 __arch_counter_get_cntvct(void)
 	return cnt;
 }
 
-#undef arch_counter_enforce_ordering
-
 static inline int arch_timer_arch_init(void)
 {
 	return 0;
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/asm-uaccess.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/asm-uaccess.h
index c764cc8fb3b6..9bf56e30f4a8 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/asm-uaccess.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/asm-uaccess.h
@@ -15,10 +15,10 @@
 	.macro	__uaccess_ttbr0_disable, tmp1
 	mrs	\tmp1, ttbr1_el1			// swapper_pg_dir
 	bic	\tmp1, \tmp1, #TTBR_ASID_MASK
-	sub	\tmp1, \tmp1, #RESERVED_TTBR0_SIZE	// reserved_ttbr0 just before swapper_pg_dir
+	sub	\tmp1, \tmp1, #PAGE_SIZE		// reserved_pg_dir just before swapper_pg_dir
 	msr	ttbr0_el1, \tmp1			// set reserved TTBR0_EL1
 	isb
-	add	\tmp1, \tmp1, #RESERVED_TTBR0_SIZE
+	add	\tmp1, \tmp1, #PAGE_SIZE
 	msr	ttbr1_el1, \tmp1		// set reserved ASID
 	isb
 	.endm
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/assembler.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/assembler.h
index b8cf7c85ffa2..01112f9767bc 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/assembler.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/assembler.h
@@ -110,6 +110,13 @@
 	hint	#20
 	.endm
 
+/*
+ * Clear Branch History instruction
+ */
+	.macro clearbhb
+	hint	#22
+	.endm
+
 /*
  * Speculation barrier
  */
@@ -462,6 +469,7 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
 	.endm
 
 /*
+ * Deprecated! Use SYM_FUNC_{START,START_WEAK,END}_PI instead.
  * Annotate a function as position independent, i.e., safe to be called before
  * the kernel virtual mapping is activated.
  */
@@ -756,4 +764,30 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
 .Lyield_out_\@ :
 	.endm
 
+	.macro __mitigate_spectre_bhb_loop      tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb  spectre_bhb_patch_loop_iter
+	mov	\tmp, #32		// Patched to correct the immediate
+alternative_cb_end
+.Lspectre_bhb_loop\@:
+	b	. + 4
+	subs	\tmp, \tmp, #1
+	b.ne	.Lspectre_bhb_loop\@
+	sb
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	/* Save/restores x0-x3 to the stack */
+	.macro __mitigate_spectre_bhb_fw
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	stp	x0, x1, [sp, #-16]!
+	stp	x2, x3, [sp, #-16]!
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+alternative_cb	arm64_update_smccc_conduit
+	nop					// Patched to SMC/HVC #0
+alternative_cb_end
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
 #endif	/* __ASM_ASSEMBLER_H */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic.h
index 9543b5e0534d..6e0f48ddfc65 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic.h
@@ -17,7 +17,7 @@
 #include <asm/lse.h>
 
 #define ATOMIC_OP(op)							\
-static inline void arch_##op(int i, atomic_t *v)			\
+static __always_inline void arch_##op(int i, atomic_t *v)		\
 {									\
 	__lse_ll_sc_body(op, i, v);					\
 }
@@ -32,7 +32,7 @@ ATOMIC_OP(atomic_sub)
 #undef ATOMIC_OP
 
 #define ATOMIC_FETCH_OP(name, op)					\
-static inline int arch_##op##name(int i, atomic_t *v)			\
+static __always_inline int arch_##op##name(int i, atomic_t *v)		\
 {									\
 	return __lse_ll_sc_body(op##name, i, v);			\
 }
@@ -56,7 +56,7 @@ ATOMIC_FETCH_OPS(atomic_sub_return)
 #undef ATOMIC_FETCH_OPS
 
 #define ATOMIC64_OP(op)							\
-static inline void arch_##op(long i, atomic64_t *v)			\
+static __always_inline void arch_##op(long i, atomic64_t *v)		\
 {									\
 	__lse_ll_sc_body(op, i, v);					\
 }
@@ -71,7 +71,7 @@ ATOMIC64_OP(atomic64_sub)
 #undef ATOMIC64_OP
 
 #define ATOMIC64_FETCH_OP(name, op)					\
-static inline long arch_##op##name(long i, atomic64_t *v)		\
+static __always_inline long arch_##op##name(long i, atomic64_t *v)	\
 {									\
 	return __lse_ll_sc_body(op##name, i, v);			\
 }
@@ -94,7 +94,7 @@ ATOMIC64_FETCH_OPS(atomic64_sub_return)
 #undef ATOMIC64_FETCH_OP
 #undef ATOMIC64_FETCH_OPS
 
-static inline long arch_atomic64_dec_if_positive(atomic64_t *v)
+static __always_inline long arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	return __lse_ll_sc_body(atomic64_dec_if_positive, v);
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic_ll_sc.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic_ll_sc.h
index 7b012148bfd6..abd302e521c0 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic_ll_sc.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic_ll_sc.h
@@ -12,19 +12,6 @@
 
 #include <linux/stringify.h>
 
-#if IS_ENABLED(CONFIG_ARM64_LSE_ATOMICS) && IS_ENABLED(CONFIG_AS_LSE)
-#define __LL_SC_FALLBACK(asm_ops)					\
-"	b	3f\n"							\
-"	.subsection	1\n"						\
-"3:\n"									\
-asm_ops "\n"								\
-"	b	4f\n"							\
-"	.previous\n"							\
-"4:\n"
-#else
-#define __LL_SC_FALLBACK(asm_ops) asm_ops
-#endif
-
 #ifndef CONFIG_CC_HAS_K_CONSTRAINT
 #define K
 #endif
@@ -43,12 +30,11 @@ __ll_sc_atomic_##op(int i, atomic_t *v)					\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ldxr	%w0, %2\n"						\
-"	" #asm_op "	%w0, %w0, %w3\n"				\
-"	stxr	%w1, %w0, %2\n"						\
-"	cbnz	%w1, 1b\n")						\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%w0, %2\n"					\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	stxr	%w1, %w0, %2\n"					\
+	"	cbnz	%w1, 1b\n"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -61,13 +47,12 @@ __ll_sc_atomic_##op##_return##name(int i, atomic_t *v)			\
 	int result;							\
 									\
 	asm volatile("// atomic_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ld" #acq "xr	%w0, %2\n"					\
-"	" #asm_op "	%w0, %w0, %w3\n"				\
-"	st" #rel "xr	%w1, %w0, %2\n"					\
-"	cbnz	%w1, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%w0, %2\n"				\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	st" #rel "xr	%w1, %w0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -83,13 +68,12 @@ __ll_sc_atomic_fetch_##op##name(int i, atomic_t *v)			\
 	int val, result;						\
 									\
 	asm volatile("// atomic_fetch_" #op #name "\n"			\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %3\n"					\
-"1:	ld" #acq "xr	%w0, %3\n"					\
-"	" #asm_op "	%w1, %w0, %w4\n"				\
-"	st" #rel "xr	%w2, %w1, %3\n"					\
-"	cbnz	%w2, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%w0, %3\n"				\
+	"	" #asm_op "	%w1, %w0, %w4\n"			\
+	"	st" #rel "xr	%w2, %w1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -142,12 +126,11 @@ __ll_sc_atomic64_##op(s64 i, atomic64_t *v)				\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "\n"				\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ldxr	%0, %2\n"						\
-"	" #asm_op "	%0, %0, %3\n"					\
-"	stxr	%w1, %0, %2\n"						\
-"	cbnz	%w1, 1b")						\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%0, %2\n"					\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	stxr	%w1, %0, %2\n"					\
+	"	cbnz	%w1, 1b"					\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i));				\
 }
@@ -160,13 +143,12 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_" #op "_return" #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %2\n"					\
-"1:	ld" #acq "xr	%0, %2\n"					\
-"	" #asm_op "	%0, %0, %3\n"					\
-"	st" #rel "xr	%w1, %0, %2\n"					\
-"	cbnz	%w1, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%0, %2\n"				\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	st" #rel "xr	%w1, %0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -176,19 +158,18 @@ __ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
 
 #define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\
 static inline long							\
-__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)		\
+__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)			\
 {									\
 	s64 result, val;						\
 	unsigned long tmp;						\
 									\
 	asm volatile("// atomic64_fetch_" #op #name "\n"		\
-	__LL_SC_FALLBACK(						\
-"	prfm	pstl1strm, %3\n"					\
-"1:	ld" #acq "xr	%0, %3\n"					\
-"	" #asm_op "	%1, %0, %4\n"					\
-"	st" #rel "xr	%w2, %1, %3\n"					\
-"	cbnz	%w2, 1b\n"						\
-"	" #mb )								\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%0, %3\n"				\
+	"	" #asm_op "	%1, %0, %4\n"				\
+	"	st" #rel "xr	%w2, %1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
 	: __stringify(constraint) "r" (i)				\
 	: cl);								\
@@ -240,15 +221,14 @@ __ll_sc_atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_dec_if_positive\n"
-	__LL_SC_FALLBACK(
-"	prfm	pstl1strm, %2\n"
-"1:	ldxr	%0, %2\n"
-"	subs	%0, %0, #1\n"
-"	b.lt	2f\n"
-"	stlxr	%w1, %0, %2\n"
-"	cbnz	%w1, 1b\n"
-"	dmb	ish\n"
-"2:")
+	"	prfm	pstl1strm, %2\n"
+	"1:	ldxr	%0, %2\n"
+	"	subs	%0, %0, #1\n"
+	"	b.lt	2f\n"
+	"	stlxr	%w1, %0, %2\n"
+	"	cbnz	%w1, 1b\n"
+	"	dmb	ish\n"
+	"2:"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	:
 	: "cc", "memory");
@@ -274,7 +254,6 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 		old = (u##sz)old;					\
 									\
 	asm volatile(							\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %[v]\n"				\
 	"1:	ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n"		\
 	"	eor	%" #w "[tmp], %" #w "[oldval], %" #w "[old]\n"	\
@@ -282,7 +261,7 @@ __ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
 	"	st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n"	\
 	"	cbnz	%w[tmp], 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
+	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
 	  [v] "+Q" (*(u##sz *)ptr)					\
 	: [old] __stringify(constraint) "r" (old), [new] "r" (new)	\
@@ -326,7 +305,6 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	unsigned long tmp, ret;						\
 									\
 	asm volatile("// __cmpxchg_double" #name "\n"			\
-	__LL_SC_FALLBACK(						\
 	"	prfm	pstl1strm, %2\n"				\
 	"1:	ldxp	%0, %1, %2\n"					\
 	"	eor	%0, %0, %3\n"					\
@@ -336,8 +314,8 @@ __ll_sc__cmpxchg_double##name(unsigned long old1,			\
 	"	st" #rel "xp	%w0, %5, %6, %2\n"			\
 	"	cbnz	%w0, 1b\n"					\
 	"	" #mb "\n"						\
-	"2:")								\
-	: "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr)	\
+	"2:"								\
+	: "=&r" (tmp), "=&r" (ret), "+Q" (*(__uint128_t *)ptr)		\
 	: "r" (old1), "r" (old2), "r" (new1), "r" (new2)		\
 	: cl);								\
 									\
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic_lse.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic_lse.h
index 574808b9df4c..28e96118c1e5 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/atomic_lse.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/atomic_lse.h
@@ -11,10 +11,11 @@
 #define __ASM_ATOMIC_LSE_H
 
 #define ATOMIC_OP(op, asm_op)						\
-static inline void __lse_atomic_##op(int i, atomic_t *v)			\
+static inline void __lse_atomic_##op(int i, atomic_t *v)		\
 {									\
 	asm volatile(							\
-"	" #asm_op "	%w[i], %[v]\n"					\
+	__LSE_PREAMBLE							\
+	"	" #asm_op "	%w[i], %[v]\n"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v));							\
 }
@@ -30,7 +31,8 @@ ATOMIC_OP(add, stadd)
 static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v)	\
 {									\
 	asm volatile(							\
-"	" #asm_op #mb "	%w[i], %w[i], %[v]"				\
+	__LSE_PREAMBLE							\
+	"	" #asm_op #mb "	%w[i], %w[i], %[v]"			\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v)							\
 	: cl);								\
@@ -58,6 +60,7 @@ static inline int __lse_atomic_add_return##name(int i, atomic_t *v)	\
 	u32 tmp;							\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	ldadd" #mb "	%w[i], %w[tmp], %[v]\n"			\
 	"	add	%w[i], %w[i], %w[tmp]"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)	\
@@ -77,6 +80,7 @@ ATOMIC_OP_ADD_RETURN(        , al, "memory")
 static inline void __lse_atomic_and(int i, atomic_t *v)
 {
 	asm volatile(
+	__LSE_PREAMBLE
 	"	mvn	%w[i], %w[i]\n"
 	"	stclr	%w[i], %[v]"
 	: [i] "+&r" (i), [v] "+Q" (v->counter)
@@ -87,6 +91,7 @@ static inline void __lse_atomic_and(int i, atomic_t *v)
 static inline int __lse_atomic_fetch_and##name(int i, atomic_t *v)	\
 {									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	mvn	%w[i], %w[i]\n"					\
 	"	ldclr" #mb "	%w[i], %w[i], %[v]"			\
 	: [i] "+&r" (i), [v] "+Q" (v->counter)				\
@@ -106,6 +111,7 @@ ATOMIC_FETCH_OP_AND(        , al, "memory")
 static inline void __lse_atomic_sub(int i, atomic_t *v)
 {
 	asm volatile(
+	__LSE_PREAMBLE
 	"	neg	%w[i], %w[i]\n"
 	"	stadd	%w[i], %[v]"
 	: [i] "+&r" (i), [v] "+Q" (v->counter)
@@ -118,12 +124,13 @@ static inline int __lse_atomic_sub_return##name(int i, atomic_t *v)	\
 	u32 tmp;							\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	neg	%w[i], %w[i]\n"					\
 	"	ldadd" #mb "	%w[i], %w[tmp], %[v]\n"			\
 	"	add	%w[i], %w[i], %w[tmp]"				\
 	: [i] "+&r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)	\
 	: "r" (v)							\
-	: cl);							\
+	: cl);								\
 									\
 	return i;							\
 }
@@ -139,6 +146,7 @@ ATOMIC_OP_SUB_RETURN(        , al, "memory")
 static inline int __lse_atomic_fetch_sub##name(int i, atomic_t *v)	\
 {									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	neg	%w[i], %w[i]\n"					\
 	"	ldadd" #mb "	%w[i], %w[i], %[v]"			\
 	: [i] "+&r" (i), [v] "+Q" (v->counter)				\
@@ -159,7 +167,8 @@ ATOMIC_FETCH_OP_SUB(        , al, "memory")
 static inline void __lse_atomic64_##op(s64 i, atomic64_t *v)		\
 {									\
 	asm volatile(							\
-"	" #asm_op "	%[i], %[v]\n"					\
+	__LSE_PREAMBLE							\
+	"	" #asm_op "	%[i], %[v]\n"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v));							\
 }
@@ -175,7 +184,8 @@ ATOMIC64_OP(add, stadd)
 static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\
 {									\
 	asm volatile(							\
-"	" #asm_op #mb "	%[i], %[i], %[v]"				\
+	__LSE_PREAMBLE							\
+	"	" #asm_op #mb "	%[i], %[i], %[v]"			\
 	: [i] "+r" (i), [v] "+Q" (v->counter)				\
 	: "r" (v)							\
 	: cl);								\
@@ -203,6 +213,7 @@ static inline long __lse_atomic64_add_return##name(s64 i, atomic64_t *v)\
 	unsigned long tmp;						\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	ldadd" #mb "	%[i], %x[tmp], %[v]\n"			\
 	"	add	%[i], %[i], %x[tmp]"				\
 	: [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)	\
@@ -222,6 +233,7 @@ ATOMIC64_OP_ADD_RETURN(        , al, "memory")
 static inline void __lse_atomic64_and(s64 i, atomic64_t *v)
 {
 	asm volatile(
+	__LSE_PREAMBLE
 	"	mvn	%[i], %[i]\n"
 	"	stclr	%[i], %[v]"
 	: [i] "+&r" (i), [v] "+Q" (v->counter)
@@ -232,6 +244,7 @@ static inline void __lse_atomic64_and(s64 i, atomic64_t *v)
 static inline long __lse_atomic64_fetch_and##name(s64 i, atomic64_t *v)	\
 {									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	mvn	%[i], %[i]\n"					\
 	"	ldclr" #mb "	%[i], %[i], %[v]"			\
 	: [i] "+&r" (i), [v] "+Q" (v->counter)				\
@@ -251,6 +264,7 @@ ATOMIC64_FETCH_OP_AND(        , al, "memory")
 static inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
 {
 	asm volatile(
+	__LSE_PREAMBLE
 	"	neg	%[i], %[i]\n"
 	"	stadd	%[i], %[v]"
 	: [i] "+&r" (i), [v] "+Q" (v->counter)
@@ -258,11 +272,12 @@ static inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
 }
 
 #define ATOMIC64_OP_SUB_RETURN(name, mb, cl...)				\
-static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)	\
+static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v)\
 {									\
 	unsigned long tmp;						\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	neg	%[i], %[i]\n"					\
 	"	ldadd" #mb "	%[i], %x[tmp], %[v]\n"			\
 	"	add	%[i], %[i], %x[tmp]"				\
@@ -284,6 +299,7 @@ ATOMIC64_OP_SUB_RETURN(        , al, "memory")
 static inline long __lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v)	\
 {									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	neg	%[i], %[i]\n"					\
 	"	ldadd" #mb "	%[i], %[i], %[v]"			\
 	: [i] "+&r" (i), [v] "+Q" (v->counter)				\
@@ -305,6 +321,7 @@ static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile(
+	__LSE_PREAMBLE
 	"1:	ldr	%x[tmp], %[v]\n"
 	"	subs	%[ret], %x[tmp], #1\n"
 	"	b.lt	2f\n"
@@ -332,6 +349,7 @@ __lse__cmpxchg_case_##name##sz(volatile void *ptr,			\
 	unsigned long tmp;						\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	mov	%" #w "[tmp], %" #w "[old]\n"			\
 	"	cas" #mb #sfx "\t%" #w "[tmp], %" #w "[new], %[v]\n"	\
 	"	mov	%" #w "[ret], %" #w "[tmp]"			\
@@ -379,12 +397,13 @@ __lse__cmpxchg_double##name(unsigned long old1,				\
 	register unsigned long x4 asm ("x4") = (unsigned long)ptr;	\
 									\
 	asm volatile(							\
+	__LSE_PREAMBLE							\
 	"	casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\
 	"	eor	%[old1], %[old1], %[oldval1]\n"			\
 	"	eor	%[old2], %[old2], %[oldval2]\n"			\
 	"	orr	%[old1], %[old1], %[old2]"			\
 	: [old1] "+&r" (x0), [old2] "+&r" (x1),				\
-	  [v] "+Q" (*(unsigned long *)ptr)				\
+	  [v] "+Q" (*(__uint128_t *)ptr)				\
 	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
 	  [oldval1] "r" (oldval1), [oldval2] "r" (oldval2)		\
 	: cl);								\
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/barrier.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/barrier.h
index e0e2b1946f42..0fcd854fc95f 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/barrier.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/barrier.h
@@ -57,6 +57,25 @@ static inline unsigned long array_index_mask_nospec(unsigned long idx,
 	return mask;
 }
 
+/*
+ * Ensure that reads of the counter are treated the same as memory reads
+ * for the purposes of ordering by subsequent memory barriers.
+ *
+ * This insanity brought to you by speculative system register reads,
+ * out-of-order memory accesses, sequence locks and Thomas Gleixner.
+ *
+ * http://lists.infradead.org/pipermail/linux-arm-kernel/2019-February/631195.html
+ */
+#define arch_counter_enforce_ordering(val) do {				\
+	u64 tmp, _val = (val);						\
+									\
+	asm volatile(							\
+	"	eor	%0, %1, %1\n"					\
+	"	add	%0, sp, %0\n"					\
+	"	ldr	xzr, [%0]"					\
+	: "=r" (tmp) : "r" (_val));					\
+} while (0)
+
 #define __smp_mb()	dmb(ish)
 #define __smp_rmb()	dmb(ishld)
 #define __smp_wmb()	dmb(ishst)
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/brk-imm.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/brk-imm.h
index e3d47b52161d..ec7720dbe2c8 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/brk-imm.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/brk-imm.h
@@ -10,6 +10,7 @@
  * #imm16 values used for BRK instruction generation
  * 0x004: for installing kprobes
  * 0x005: for installing uprobes
+ * 0x006: for kprobe software single-step
  * Allowed values for kgdb are 0x400 - 0x7ff
  * 0x100: for triggering a fault on purpose (reserved)
  * 0x400: for dynamic BRK instruction
@@ -19,6 +20,7 @@
  */
 #define KPROBES_BRK_IMM			0x004
 #define UPROBES_BRK_IMM			0x005
+#define KPROBES_BRK_SS_IMM		0x006
 #define FAULT_BRK_IMM			0x100
 #define KGDB_DYN_DBG_BRK_IMM		0x400
 #define KGDB_COMPILED_DBG_BRK_IMM	0x401
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cache.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cache.h
index 43da6dd29592..806e9dc2a852 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cache.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cache.h
@@ -11,6 +11,7 @@
 #define CTR_L1IP_MASK		3
 #define CTR_DMINLINE_SHIFT	16
 #define CTR_IMINLINE_SHIFT	0
+#define CTR_IMINLINE_MASK	0xf
 #define CTR_ERG_SHIFT		20
 #define CTR_CWG_SHIFT		24
 #define CTR_CWG_MASK		15
@@ -18,7 +19,7 @@
 #define CTR_DIC_SHIFT		29
 
 #define CTR_CACHE_MINLINE_MASK	\
-	(0xf << CTR_DMINLINE_SHIFT | 0xf << CTR_IMINLINE_SHIFT)
+	(0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT)
 
 #define CTR_L1IP(ctr)		(((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK)
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cacheflush.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cacheflush.h
index 665c78e0665a..3e7dda6f1ab1 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cacheflush.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cacheflush.h
@@ -79,7 +79,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * IPI all online CPUs so that they undergo a context synchronization
 	 * event and are forced to refetch the new instructions.
 	 */
-#ifdef CONFIG_KGDB
+
 	/*
 	 * KGDB performs cache maintenance with interrupts disabled, so we
 	 * will deadlock trying to IPI the secondary CPUs. In theory, we can
@@ -89,9 +89,9 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * the patching operation, so we don't need extra IPIs here anyway.
 	 * In which case, add a KGDB-specific bodge and return early.
 	 */
-	if (kgdb_connected && irqs_disabled())
+	if (in_dbg_master())
 		return;
-#endif
+
 	kick_all_cpus_sync();
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/checksum.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/checksum.h
index d064a50deb5f..5665a3fc14be 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/checksum.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/checksum.h
@@ -19,16 +19,17 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	__uint128_t tmp;
 	u64 sum;
+	int n = ihl; /* we want it signed */
 
 	tmp = *(const __uint128_t *)iph;
 	iph += 16;
-	ihl -= 4;
+	n -= 4;
 	tmp += ((tmp >> 64) | (tmp << 64));
 	sum = tmp >> 64;
 	do {
 		sum += *(const u32 *)iph;
 		iph += 4;
-	} while (--ihl);
+	} while (--n > 0);
 
 	sum += ((sum >> 32) | (sum << 32));
 	return csum_fold((__force u32)(sum >> 32));
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/clocksource.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/clocksource.h
index 0ece64a26c8c..0c7910447235 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/clocksource.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/clocksource.h
@@ -2,8 +2,11 @@
 #ifndef _ASM_CLOCKSOURCE_H
 #define _ASM_CLOCKSOURCE_H
 
+#include <asm/vdso/clocksource.h>
+
 struct arch_clocksource_data {
-	bool vdso_direct;	/* Usable for direct VDSO access? */
+	/* Usable for direct VDSO access? */
+	enum vdso_arch_clockmode clock_mode;
 };
 
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/compat.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/compat.h
index b0d53a265f1d..7b4172ce497c 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/compat.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/compat.h
@@ -4,6 +4,9 @@
  */
 #ifndef __ASM_COMPAT_H
 #define __ASM_COMPAT_H
+
+#include <asm-generic/compat.h>
+
 #ifdef CONFIG_COMPAT
 
 /*
@@ -13,8 +16,6 @@
 #include <linux/sched.h>
 #include <linux/sched/task_stack.h>
 
-#include <asm-generic/compat.h>
-
 #define COMPAT_USER_HZ		100
 #ifdef __AARCH64EB__
 #define COMPAT_UTS_MACHINE	"armv8b\0\0"
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cpu.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpu.h
index d72d995b7e25..85cc06380e93 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cpu.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpu.h
@@ -25,6 +25,7 @@ struct cpuinfo_arm64 {
 	u64		reg_id_aa64dfr1;
 	u64		reg_id_aa64isar0;
 	u64		reg_id_aa64isar1;
+	u64		reg_id_aa64isar2;
 	u64		reg_id_aa64mmfr0;
 	u64		reg_id_aa64mmfr1;
 	u64		reg_id_aa64mmfr2;
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cpucaps.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpucaps.h
index ac1dbca3d0cd..3b16cbc945cf 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cpucaps.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpucaps.h
@@ -54,7 +54,10 @@
 #define ARM64_WORKAROUND_1463225		44
 #define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM	45
 #define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM	46
+#define ARM64_WORKAROUND_1542419		47
+#define ARM64_SPECTRE_BHB			48
+#define ARM64_WORKAROUND_1742098		49
 
-#define ARM64_NCAPS				47
+#define ARM64_NCAPS				50
 
 #endif /* __ASM_CPUCAPS_H */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cpufeature.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpufeature.h
index 9cde5d2e768f..f63438474dd5 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cpufeature.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cpufeature.h
@@ -262,6 +262,8 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
 /*
  * CPU feature detected at boot time based on feature of one or more CPUs.
  * All possible conflicts for a late CPU are ignored.
+ * NOTE: this means that a late CPU with the feature will *not* cause the
+ * capability to be advertised by cpus_have_*cap()!
  */
 #define ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE		\
 	(ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\
@@ -506,6 +508,34 @@ static inline bool cpu_supports_mixed_endian_el0(void)
 	return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
 }
 
+static inline bool supports_csv2p3(int scope)
+{
+	u64 pfr0;
+	u8 csv2_val;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+	else
+		pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	csv2_val = cpuid_feature_extract_unsigned_field(pfr0,
+							ID_AA64PFR0_CSV2_SHIFT);
+	return csv2_val == 3;
+}
+
+static inline bool supports_clearbhb(int scope)
+{
+	u64 isar2;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		isar2 = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	else
+		isar2 = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
+
+	return cpuid_feature_extract_unsigned_field(isar2,
+						    ID_AA64ISAR2_CLEARBHB_SHIFT);
+}
+
 static inline bool system_supports_32bit_el0(void)
 {
 	return cpus_have_const_cap(ARM64_HAS_32BIT_EL0);
@@ -601,7 +631,7 @@ static inline bool system_supports_generic_auth(void)
 		 cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH_IMP_DEF));
 }
 
-static inline bool system_uses_irq_prio_masking(void)
+static __always_inline bool system_uses_irq_prio_masking(void)
 {
 	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
 	       cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING);
@@ -637,6 +667,18 @@ static inline int arm64_get_ssbd_state(void)
 
 void arm64_set_ssbd_mitigation(bool state);
 
+/* Watch out, ordering is important here. */
+enum mitigation_state {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum mitigation_state arm64_get_spectre_bhb_state(void);
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
+u8 spectre_bhb_loop_affected(int scope);
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+
 extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 
 static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange)
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/cputype.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cputype.h
index aca07c2f6e6e..892fc0ceccb8 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/cputype.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/cputype.h
@@ -41,7 +41,7 @@
 	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
 
 #define MIDR_CPU_MODEL(imp, partnum) \
-	(((imp)			<< MIDR_IMPLEMENTOR_SHIFT) | \
+	((_AT(u32, imp)		<< MIDR_IMPLEMENTOR_SHIFT) | \
 	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
 	((partnum)		<< MIDR_PARTNUM_SHIFT))
 
@@ -59,6 +59,7 @@
 #define ARM_CPU_IMP_NVIDIA		0x4E
 #define ARM_CPU_IMP_FUJITSU		0x46
 #define ARM_CPU_IMP_HISI		0x48
+#define ARM_CPU_IMP_AMPERE		0xC0
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -71,6 +72,14 @@
 #define ARM_CPU_PART_CORTEX_A55		0xD05
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
+#define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_NEOVERSE_V1	0xD40
+#define ARM_CPU_PART_CORTEX_A78		0xD41
+#define ARM_CPU_PART_CORTEX_X1		0xD44
+#define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_X2		0xD48
+#define ARM_CPU_PART_NEOVERSE_N2	0xD49
+#define ARM_CPU_PART_CORTEX_A78C	0xD4B
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -93,6 +102,8 @@
 
 #define HISI_CPU_PART_TSV110		0xD01
 
+#define AMPERE_CPU_PART_AMPERE1		0xAC3
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -102,6 +113,14 @@
 #define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55)
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
+#define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
+#define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
+#define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
+#define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
+#define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
+#define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
@@ -115,6 +134,7 @@
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
+#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/daifflags.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/daifflags.h
index 063c964af705..48bfbf70dbb0 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/daifflags.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/daifflags.h
@@ -36,7 +36,7 @@ static inline void local_daif_mask(void)
 	trace_hardirqs_off();
 }
 
-static inline unsigned long local_daif_save(void)
+static inline unsigned long local_daif_save_flags(void)
 {
 	unsigned long flags;
 
@@ -48,6 +48,15 @@ static inline unsigned long local_daif_save(void)
 			flags |= PSR_I_BIT;
 	}
 
+	return flags;
+}
+
+static inline unsigned long local_daif_save(void)
+{
+	unsigned long flags;
+
+	flags = local_daif_save_flags();
+
 	local_daif_mask();
 
 	return flags;
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/debug-monitors.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/debug-monitors.h
index 7619f473155f..bd451732a3af 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/debug-monitors.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/debug-monitors.h
@@ -53,6 +53,7 @@
 
 /* kprobes BRK opcodes with ESR encoding  */
 #define BRK64_OPCODE_KPROBES	(AARCH64_BREAK_MON | (KPROBES_BRK_IMM << 5))
+#define BRK64_OPCODE_KPROBES_SS	(AARCH64_BREAK_MON | (KPROBES_BRK_SS_IMM << 5))
 /* uprobes BRK opcodes with ESR encoding  */
 #define BRK64_OPCODE_UPROBES	(AARCH64_BREAK_MON | (UPROBES_BRK_IMM << 5))
 
@@ -109,10 +110,13 @@ void disable_debug_monitors(enum dbg_active_el el);
 
 void user_rewind_single_step(struct task_struct *task);
 void user_fastforward_single_step(struct task_struct *task);
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task);
 
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
 int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 int reinstall_suspended_bps(struct pt_regs *regs);
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/fixmap.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/fixmap.h
index f987b8a8f325..928a96b9b161 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/fixmap.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/fixmap.h
@@ -63,9 +63,11 @@ enum fixed_addresses {
 #endif /* CONFIG_ACPI_APEI_GHES */
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	FIX_ENTRY_TRAMP_TEXT3,
+	FIX_ENTRY_TRAMP_TEXT2,
+	FIX_ENTRY_TRAMP_TEXT1,
 	FIX_ENTRY_TRAMP_DATA,
-	FIX_ENTRY_TRAMP_TEXT,
-#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT))
+#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT1))
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 	__end_of_permanent_fixed_addresses,
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/io.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/io.h
index 323cb306bd28..8ac55ff3094a 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/io.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/io.h
@@ -204,4 +204,8 @@ extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
 
 extern int devmem_is_allowed(unsigned long pfn);
 
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
+
 #endif	/* __ASM_IO_H */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kernel-pgtable.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kernel-pgtable.h
index a6e5da755359..9679b74a2081 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kernel-pgtable.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kernel-pgtable.h
@@ -65,8 +65,8 @@
 #define EARLY_KASLR	(0)
 #endif
 
-#define EARLY_ENTRIES(vstart, vend, shift) (((vend) >> (shift)) \
-					- ((vstart) >> (shift)) + 1 + EARLY_KASLR)
+#define EARLY_ENTRIES(vstart, vend, shift) \
+	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1 + EARLY_KASLR)
 
 #define EARLY_PGDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT))
 
@@ -89,12 +89,6 @@
 #define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR + TEXT_OFFSET, _end))
 #define IDMAP_DIR_SIZE		(IDMAP_PGTABLE_LEVELS * PAGE_SIZE)
 
-#ifdef CONFIG_ARM64_SW_TTBR0_PAN
-#define RESERVED_TTBR0_SIZE	(PAGE_SIZE)
-#else
-#define RESERVED_TTBR0_SIZE	(0)
-#endif
-
 /* Initial memory map size */
 #if ARM64_SWAPPER_USES_SECTION_MAPS
 #define SWAPPER_BLOCK_SHIFT	SECTION_SHIFT
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kprobes.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kprobes.h
index 97e511d645a2..8699ce30f587 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kprobes.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kprobes.h
@@ -16,7 +16,7 @@
 #include <linux/percpu.h>
 
 #define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE			1
+#define MAX_INSN_SIZE			2
 
 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_arm.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_arm.h
index ddf9d762ac62..9be64c0ad31f 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_arm.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_arm.h
@@ -72,11 +72,12 @@
  * IMO:		Override CPSR.I and enable signaling with VI
  * FMO:		Override CPSR.F and enable signaling with VF
  * SWIO:	Turn set/way invalidates into set/way clean+invalidate
+ * PTW:		Take a stage2 fault if a stage1 walk steps in device memory
  */
 #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
 			 HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
-			 HCR_FMO | HCR_IMO)
+			 HCR_FMO | HCR_IMO | HCR_PTW )
 #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
 #define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK)
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
@@ -275,6 +276,7 @@
 #define CPTR_EL2_DEFAULT	CPTR_EL2_RES1
 
 /* Hyp Debug Configuration Register bits */
+#define MDCR_EL2_TTRF		(1 << 19)
 #define MDCR_EL2_TPMS		(1 << 14)
 #define MDCR_EL2_E2PB_MASK	(UL(0x3))
 #define MDCR_EL2_E2PB_SHIFT	(UL(12))
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_asm.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_asm.h
index 44a243754c1b..c54e759896c1 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_asm.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_asm.h
@@ -60,7 +60,7 @@ extern char __kvm_hyp_vector[];
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
-extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
+extern void __kvm_flush_cpu_context(struct kvm_vcpu *vcpu);
 
 extern void __kvm_timer_set_cntvoff(u32 cntvoff_low, u32 cntvoff_high);
 
@@ -88,6 +88,34 @@ extern u32 __kvm_get_mdcr_el2(void);
 		*__hyp_this_cpu_ptr(sym);				\
 	 })
 
+#define __KVM_EXTABLE(from, to)						\
+	"	.pushsection	__kvm_ex_table, \"a\"\n"		\
+	"	.align		3\n"					\
+	"	.long		(" #from " - .), (" #to " - .)\n"	\
+	"	.popsection\n"
+
+
+#define __kvm_at(at_op, addr)						\
+( { 									\
+	int __kvm_at_err = 0;						\
+	u64 spsr, elr;							\
+	asm volatile(							\
+	"	mrs	%1, spsr_el2\n"					\
+	"	mrs	%2, elr_el2\n"					\
+	"1:	at	"at_op", %3\n"					\
+	"	isb\n"							\
+	"	b	9f\n"						\
+	"2:	msr	spsr_el2, %1\n"					\
+	"	msr	elr_el2, %2\n"					\
+	"	mov	%w0, %4\n"					\
+	"9:\n"								\
+	__KVM_EXTABLE(1b, 2b)						\
+	: "+r" (__kvm_at_err), "=&r" (spsr), "=&r" (elr)		\
+	: "r" (addr), "i" (-EFAULT));					\
+	__kvm_at_err;							\
+} )
+
+
 #else /* __ASSEMBLY__ */
 
 .macro hyp_adr_this_cpu reg, sym, tmp
@@ -113,6 +141,21 @@ extern u32 __kvm_get_mdcr_el2(void);
 	kern_hyp_va	\vcpu
 .endm
 
+/*
+ * KVM extable for unexpected exceptions.
+ * In the same format _asm_extable, but output to a different section so that
+ * it can be mapped to EL2. The KVM version is not sorted. The caller must
+ * ensure:
+ * x18 has the hypervisor value to allow any Shadow-Call-Stack instrumented
+ * code to write to it, and that SPSR_EL2 and ELR_EL2 are restored by the fixup.
+ */
+.macro	_kvm_extable, from, to
+	.pushsection	__kvm_ex_table, "a"
+	.align		3
+	.long		(\from - .), (\to - .)
+	.popsection
+.endm
+
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_emulate.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_emulate.h
index d69c1efc63e7..4a4c20a1bf26 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_emulate.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_emulate.h
@@ -97,12 +97,6 @@ static inline void vcpu_ptrauth_disable(struct kvm_vcpu *vcpu)
 	vcpu->arch.hcr_el2 &= ~(HCR_API | HCR_APK);
 }
 
-static inline void vcpu_ptrauth_setup_lazy(struct kvm_vcpu *vcpu)
-{
-	if (vcpu_has_ptrauth(vcpu))
-		vcpu_ptrauth_disable(vcpu);
-}
-
 static inline unsigned long vcpu_get_vsesr(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.vsesr_el2;
@@ -204,6 +198,38 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v)
 		vcpu_gp_regs(vcpu)->spsr[KVM_SPSR_EL1] = v;
 }
 
+/*
+ * The layout of SPSR for an AArch32 state is different when observed from an
+ * AArch64 SPSR_ELx or an AArch32 SPSR_*. This function generates the AArch32
+ * view given an AArch64 view.
+ *
+ * In ARM DDI 0487E.a see:
+ *
+ * - The AArch64 view (SPSR_EL2) in section C5.2.18, page C5-426
+ * - The AArch32 view (SPSR_abt) in section G8.2.126, page G8-6256
+ * - The AArch32 view (SPSR_und) in section G8.2.132, page G8-6280
+ *
+ * Which show the following differences:
+ *
+ * | Bit | AA64 | AA32 | Notes                       |
+ * +-----+------+------+-----------------------------|
+ * | 24  | DIT  | J    | J is RES0 in ARMv8          |
+ * | 21  | SS   | DIT  | SS doesn't exist in AArch32 |
+ *
+ * ... and all other bits are (currently) common.
+ */
+static inline unsigned long host_spsr_to_spsr32(unsigned long spsr)
+{
+	const unsigned long overlap = BIT(24) | BIT(21);
+	unsigned long dit = !!(spsr & PSR_AA32_DIT_BIT);
+
+	spsr &= ~overlap;
+
+	spsr |= dit << 21;
+
+	return spsr;
+}
+
 static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
 {
 	u32 mode;
@@ -263,12 +289,17 @@ static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu)
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SSE);
 }
 
+static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SF);
+}
+
 static inline int kvm_vcpu_dabt_get_rd(const struct kvm_vcpu *vcpu)
 {
 	return (kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT;
 }
 
-static inline bool kvm_vcpu_dabt_iss1tw(const struct kvm_vcpu *vcpu)
+static __always_inline bool kvm_vcpu_abt_iss1tw(const struct kvm_vcpu *vcpu)
 {
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_S1PTW);
 }
@@ -276,7 +307,7 @@ static inline bool kvm_vcpu_dabt_iss1tw(const struct kvm_vcpu *vcpu)
 static inline bool kvm_vcpu_dabt_iswrite(const struct kvm_vcpu *vcpu)
 {
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_WNR) ||
-		kvm_vcpu_dabt_iss1tw(vcpu); /* AF/DBM update */
+		kvm_vcpu_abt_iss1tw(vcpu); /* AF/DBM update */
 }
 
 static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu)
@@ -305,6 +336,11 @@ static inline bool kvm_vcpu_trap_is_iabt(const struct kvm_vcpu *vcpu)
 	return kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_IABT_LOW;
 }
 
+static inline bool kvm_vcpu_trap_is_exec_fault(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_trap_is_iabt(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu);
+}
+
 static inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) & ESR_ELx_FSC;
@@ -342,6 +378,27 @@ static inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 {
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		/*
+		 * Only a permission fault on a S1PTW should be
+		 * considered as a write. Otherwise, page tables baked
+		 * in a read-only memslot will result in an exception
+		 * being delivered in the guest.
+		 *
+		 * The drawback is that we end-up faulting twice if the
+		 * guest is using any of HW AF/DB: a translation fault
+		 * to map the page containing the PT (read only at
+		 * first), then a permission fault to allow the flags
+		 * to be set.
+		 */
+		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+		case ESR_ELx_FSC_PERM:
+			return true;
+		default:
+			return false;
+		}
+	}
+
 	if (kvm_vcpu_trap_is_iabt(vcpu))
 		return false;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_host.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_host.h
index f656169db8c3..e6efdbe88c0a 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_host.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_host.h
@@ -182,6 +182,7 @@ enum vcpu_sysreg {
 #define c2_TTBR1	(TTBR1_EL1 * 2)	/* Translation Table Base Register 1 */
 #define c2_TTBR1_high	(c2_TTBR1 + 1)	/* TTBR1 top 32 bits */
 #define c2_TTBCR	(TCR_EL1 * 2)	/* Translation Table Base Control R. */
+#define c2_TTBCR2	(c2_TTBCR + 1)	/* Translation Table Base Control R. 2 */
 #define c3_DACR		(DACR32_EL2 * 2)/* Domain Access Control Register */
 #define c5_DFSR		(ESR_EL1 * 2)	/* Data Fault Status Register */
 #define c5_IFSR		(IFSR32_EL2 * 2)/* Instruction Fault Status Register */
@@ -209,6 +210,7 @@ enum vcpu_sysreg {
 #define cp14_DBGWCR0	(DBGWCR0_EL1 * 2)
 #define cp14_DBGWVR0	(DBGWVR0_EL1 * 2)
 #define cp14_DBGDCCINT	(MDCCINT_EL1 * 2)
+#define cp14_DBGVCR	(DBGVCR32_EL2 * 2)
 
 #define NR_COPRO_REGS	(NR_SYS_REGS * 2)
 
@@ -392,8 +394,10 @@ void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg);
  * CP14 and CP15 live in the same array, as they are backed by the
  * same system registers.
  */
-#define vcpu_cp14(v,r)		((v)->arch.ctxt.copro[(r)])
-#define vcpu_cp15(v,r)		((v)->arch.ctxt.copro[(r)])
+#define CPx_BIAS		IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)
+
+#define vcpu_cp14(v,r)		((v)->arch.ctxt.copro[(r) ^ CPx_BIAS])
+#define vcpu_cp15(v,r)		((v)->arch.ctxt.copro[(r) ^ CPx_BIAS])
 
 struct kvm_vm_stat {
 	ulong remote_tlb_flush;
@@ -425,7 +429,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 int kvm_unmap_hva_range(struct kvm *kvm,
-			unsigned long start, unsigned long end);
+			unsigned long start, unsigned long end, unsigned flags);
 int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
 int kvm_test_age_hva(struct kvm *kvm, unsigned long hva);
@@ -548,6 +552,7 @@ static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
 
 void kvm_arm_init_debug(void);
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
@@ -677,4 +682,11 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 #define kvm_arm_vcpu_sve_finalized(vcpu) \
 	((vcpu)->arch.flags & KVM_ARM64_VCPU_SVE_FINALIZED)
 
+#define kvm_arm_vcpu_loaded(vcpu)	((vcpu)->arch.sysregs_loaded_on_cpu)
+
+static inline enum mitigation_state kvm_arm_get_spectre_bhb_state(void)
+{
+	return arm64_get_spectre_bhb_state();
+}
+
 #endif /* __ARM64_KVM_HOST_H__ */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_hyp.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_hyp.h
index 97f21cc66657..7f7fdb16bb96 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_hyp.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_hyp.h
@@ -71,6 +71,9 @@ void __sysreg32_restore_state(struct kvm_vcpu *vcpu);
 
 void __debug_switch_to_guest(struct kvm_vcpu *vcpu);
 void __debug_switch_to_host(struct kvm_vcpu *vcpu);
+void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu);
+void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu);
+
 
 void __fpsimd_save_state(struct user_fpsimd_state *fp_regs);
 void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs);
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_mmio.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_mmio.h
index 02b5c48fd467..b204501a0c39 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_mmio.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_mmio.h
@@ -10,13 +10,11 @@
 #include <linux/kvm_host.h>
 #include <asm/kvm_arm.h>
 
-/*
- * This is annoying. The mmio code requires this, even if we don't
- * need any decoding. To be fixed.
- */
 struct kvm_decode {
 	unsigned long rt;
 	bool sign_extend;
+	/* Witdth of the register accessed by the faulting instruction is 64-bits */
+	bool sixty_four;
 };
 
 void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_mmu.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_mmu.h
index befe37d4bc0e..ffe0aad96b17 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/kvm_mmu.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/kvm_mmu.h
@@ -478,7 +478,9 @@ static inline void *kvm_get_hyp_vector(void)
 	void *vect = kern_hyp_va(kvm_ksym_ref(__kvm_hyp_vector));
 	int slot = -1;
 
-	if (cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR) && data->fn) {
+	if ((cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR) ||
+	     cpus_have_const_cap(ARM64_SPECTRE_BHB)) &&
+	    data && data->template_start) {
 		vect = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs_start));
 		slot = data->hyp_vectors_slot;
 	}
@@ -507,7 +509,8 @@ static inline int kvm_map_vectors(void)
 	 * !HBP +  HEL2 -> allocate one vector slot and use exec mapping
 	 *  HBP +  HEL2 -> use hardened vertors and use exec mapping
 	 */
-	if (cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR)) {
+	if (cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR) ||
+	    cpus_have_const_cap(ARM64_SPECTRE_BHB)) {
 		__kvm_bp_vect_base = kvm_ksym_ref(__bp_harden_hyp_vecs_start);
 		__kvm_bp_vect_base = kern_hyp_va(__kvm_bp_vect_base);
 	}
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/linkage.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/linkage.h
index 1b266292f0be..ebee3113a62f 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/linkage.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/linkage.h
@@ -4,4 +4,20 @@
 #define __ALIGN		.align 2
 #define __ALIGN_STR	".align 2"
 
+/*
+ * Annotate a function as position independent, i.e., safe to be called before
+ * the kernel virtual mapping is activated.
+ */
+#define SYM_FUNC_START_PI(x)			\
+		SYM_FUNC_START_ALIAS(__pi_##x);	\
+		SYM_FUNC_START(x)
+
+#define SYM_FUNC_START_WEAK_PI(x)		\
+		SYM_FUNC_START_ALIAS(__pi_##x);	\
+		SYM_FUNC_START_WEAK(x)
+
+#define SYM_FUNC_END_PI(x)			\
+		SYM_FUNC_END(x);		\
+		SYM_FUNC_END_ALIAS(__pi_##x)
+
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/lse.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/lse.h
index 80b388278149..5de132100b6d 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/lse.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/lse.h
@@ -6,6 +6,8 @@
 
 #if defined(CONFIG_AS_LSE) && defined(CONFIG_ARM64_LSE_ATOMICS)
 
+#define __LSE_PREAMBLE	".arch_extension lse\n"
+
 #include <linux/compiler_types.h>
 #include <linux/export.h>
 #include <linux/jump_label.h>
@@ -14,8 +16,6 @@
 #include <asm/atomic_lse.h>
 #include <asm/cpucaps.h>
 
-__asm__(".arch_extension	lse");
-
 extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS];
 extern struct static_key_false arm64_const_caps_ready;
 
@@ -34,7 +34,7 @@ static inline bool system_uses_lse_atomics(void)
 
 /* In-line patching at runtime */
 #define ARM64_LSE_ATOMIC_INSN(llsc, lse)				\
-	ALTERNATIVE(llsc, lse, ARM64_HAS_LSE_ATOMICS)
+	ALTERNATIVE(llsc, __LSE_PREAMBLE lse, ARM64_HAS_LSE_ATOMICS)
 
 #else	/* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/memory.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/memory.h
index c23c47360664..67b6b90f37ee 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/memory.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/memory.h
@@ -178,7 +178,6 @@ extern u64			vabits_actual;
 #include <linux/bitops.h>
 #include <linux/mmdebug.h>
 
-extern s64			physvirt_offset;
 extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
 #define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
@@ -219,7 +218,7 @@ static inline unsigned long kaslr_offset(void)
 	((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
 
 #define untagged_addr(addr)	({					\
-	u64 __addr = (__force u64)addr;					\
+	u64 __addr = (__force u64)(addr);					\
 	__addr &= __untagged_addr(__addr);				\
 	(__force __typeof__(addr))__addr;				\
 })
@@ -248,13 +247,13 @@ static inline const void *__tag_set(const void *addr, u8 tag)
 
 
 /*
- * The linear kernel range starts at the bottom of the virtual address
- * space. Testing the top bit for the start of the region is a
- * sufficient check and avoids having to worry about the tag.
+ * Check whether an arbitrary address is within the linear map, which
+ * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
+ * kernel's TTBR1 address range.
  */
-#define __is_lm_address(addr)	(!(((u64)addr) & BIT(vabits_actual - 1)))
+#define __is_lm_address(addr)	(((u64)(addr) ^ PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
 
-#define __lm_to_phys(addr)	(((addr) + physvirt_offset))
+#define __lm_to_phys(addr)	(((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
 #define __kimg_to_phys(addr)	((addr) - kimage_voffset)
 
 #define __virt_to_phys_nodebug(x) ({					\
@@ -272,7 +271,7 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
 #define __phys_addr_symbol(x)	__pa_symbol_nodebug(x)
 #endif /* CONFIG_DEBUG_VIRTUAL */
 
-#define __phys_to_virt(x)	((unsigned long)((x) - physvirt_offset))
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
 #define __phys_to_kimg(x)	((unsigned long)((x) + kimage_voffset))
 
 /*
@@ -316,6 +315,11 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
 
 #if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL)
+#define page_to_virt(x)	({						\
+	__typeof__(x) __page = x;					\
+	void *__addr = __va(page_to_phys(__page));			\
+	(void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
+})
 #define virt_to_page(x)		pfn_to_page(virt_to_pfn(x))
 #else
 #define page_to_virt(x)	({						\
@@ -333,7 +337,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #endif /* !CONFIG_SPARSEMEM_VMEMMAP || CONFIG_DEBUG_VIRTUAL */
 
 #define virt_addr_valid(addr)	({					\
-	__typeof__(addr) __addr = addr;					\
+	__typeof__(addr) __addr = __tag_reset(addr);			\
 	__is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr));	\
 })
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/mmu.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/mmu.h
index f217e3292919..1b9e49fb0e1b 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/mmu.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/mmu.h
@@ -29,7 +29,7 @@ typedef struct {
  */
 #define ASID(mm)	((mm)->context.id.counter & 0xffff)
 
-static inline bool arm64_kernel_unmapped_at_el0(void)
+static __always_inline bool arm64_kernel_unmapped_at_el0(void)
 {
 	return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) &&
 	       cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0);
@@ -82,6 +82,12 @@ typedef void (*bp_hardening_cb_t)(void);
 struct bp_hardening_data {
 	int			hyp_vectors_slot;
 	bp_hardening_cb_t	fn;
+
+	/*
+	 * template_start is only used by the BHB mitigation to identify the
+	 * hyp_vectors_slot sequence.
+	 */
+	const char *template_start;
 };
 
 #if (defined(CONFIG_HARDEN_BRANCH_PREDICTOR) ||	\
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/mmu_context.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/mmu_context.h
index 3827ff4040a3..fb564de90aa7 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/mmu_context.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/mmu_context.h
@@ -36,11 +36,11 @@ static inline void contextidr_thread_switch(struct task_struct *next)
 }
 
 /*
- * Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0.
+ * Set TTBR0 to reserved_pg_dir. No translations will be possible via TTBR0.
  */
 static inline void cpu_set_reserved_ttbr0(void)
 {
-	unsigned long ttbr = phys_to_ttbr(__pa_symbol(empty_zero_page));
+	unsigned long ttbr = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
 
 	write_sysreg(ttbr, ttbr0_el1);
 	isb();
@@ -63,10 +63,7 @@ extern u64 idmap_ptrs_per_pgd;
 
 static inline bool __cpu_uses_extended_idmap(void)
 {
-	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52))
-		return false;
-
-	return unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS));
+	return unlikely(idmap_t0sz != TCR_T0SZ(vabits_actual));
 }
 
 /*
@@ -187,9 +184,9 @@ static inline void update_saved_ttbr0(struct task_struct *tsk,
 		return;
 
 	if (mm == &init_mm)
-		ttbr = __pa_symbol(empty_zero_page);
+		ttbr = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
 	else
-		ttbr = virt_to_phys(mm->pgd) | ASID(mm) << 48;
+		ttbr = phys_to_ttbr(virt_to_phys(mm->pgd)) | ASID(mm) << 48;
 
 	WRITE_ONCE(task_thread_info(tsk)->ttbr0, ttbr);
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/numa.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/numa.h
index 626ad01e83bf..dd870390d639 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/numa.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/numa.h
@@ -25,6 +25,9 @@ const struct cpumask *cpumask_of_node(int node);
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
 static inline const struct cpumask *cpumask_of_node(int node)
 {
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
 	return node_to_cpumask_map[node];
 }
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/pgtable-prot.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pgtable-prot.h
index 8dc6c5cdabe6..99b0a32e25c1 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/pgtable-prot.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pgtable-prot.h
@@ -54,7 +54,7 @@
 #define PAGE_HYP		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_HYP_XN)
 #define PAGE_HYP_EXEC		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY)
 #define PAGE_HYP_RO		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN)
-#define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
+#define PAGE_HYP_DEVICE		__pgprot(_PROT_DEFAULT | PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_HYP | PTE_HYP_XN)
 
 #define PAGE_S2_MEMATTR(attr)						\
 	({								\
@@ -85,13 +85,12 @@
 #define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE)
 #define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
 #define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
-#define PAGE_EXECONLY		__pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)
 
 #define __P000  PAGE_NONE
 #define __P001  PAGE_READONLY
 #define __P010  PAGE_READONLY
 #define __P011  PAGE_READONLY
-#define __P100  PAGE_EXECONLY
+#define __P100  PAGE_READONLY_EXEC
 #define __P101  PAGE_READONLY_EXEC
 #define __P110  PAGE_READONLY_EXEC
 #define __P111  PAGE_READONLY_EXEC
@@ -100,7 +99,7 @@
 #define __S001  PAGE_READONLY
 #define __S010  PAGE_SHARED
 #define __S011  PAGE_SHARED
-#define __S100  PAGE_EXECONLY
+#define __S100  PAGE_READONLY_EXEC
 #define __S101  PAGE_READONLY_EXEC
 #define __S110  PAGE_SHARED_EXEC
 #define __S111  PAGE_SHARED_EXEC
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/pgtable.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pgtable.h
index 565aa45ef134..3a057d427900 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/pgtable.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pgtable.h
@@ -23,6 +23,8 @@
 #define VMALLOC_START		(MODULES_END)
 #define VMALLOC_END		(- PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
 
+#define vmemmap			((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
+
 #define FIRST_USER_ADDRESS	0UL
 
 #ifndef __ASSEMBLY__
@@ -33,8 +35,6 @@
 #include <linux/mm_types.h>
 #include <linux/sched.h>
 
-extern struct page *vmemmap;
-
 extern void __pte_error(const char *file, int line, unsigned long val);
 extern void __pmd_error(const char *file, int line, unsigned long val);
 extern void __pud_error(const char *file, int line, unsigned long val);
@@ -54,9 +54,15 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  * page table entry, taking care of 52-bit addresses.
  */
 #ifdef CONFIG_ARM64_PA_BITS_52
-#define __pte_to_phys(pte)	\
-	((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36))
-#define __phys_to_pte_val(phys)	(((phys) | ((phys) >> 36)) & PTE_ADDR_MASK)
+static inline phys_addr_t __pte_to_phys(pte_t pte)
+{
+	return (pte_val(pte) & PTE_ADDR_LOW) |
+		((pte_val(pte) & PTE_ADDR_HIGH) << 36);
+}
+static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
+{
+	return (phys | (phys >> 36)) & PTE_ADDR_MASK;
+}
 #else
 #define __pte_to_phys(pte)	(pte_val(pte) & PTE_ADDR_MASK)
 #define __phys_to_pte_val(phys)	(phys)
@@ -96,14 +102,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
 
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-/*
- * Execute-only user mappings do not have the PTE_USER bit set. All valid
- * kernel mappings have the PTE_UXN bit set.
- */
 #define pte_valid_not_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN))
-#define pte_valid_young(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
+	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
 #define pte_valid_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 
@@ -111,14 +111,17 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
  * Could the pte be present in the TLB? We must check mm_tlb_flush_pending
  * so that we don't erroneously return false for pages that have been
  * remapped as PROT_NONE but are yet to be flushed from the TLB.
+ * Note that we can't make any assumptions based on the state of the access
+ * flag, since ptep_clear_flush_young() elides a DSB when invalidating the
+ * TLB.
  */
 #define pte_accessible(mm, pte)	\
-	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))
+	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
 
 /*
  * p??_access_permitted() is true for valid user mappings (subject to the
- * write permission check) other than user execute-only which do not have the
- * PTE_USER bit set. PROT_NONE mappings do not have the PTE_VALID bit set.
+ * write permission check). PROT_NONE mappings do not have the PTE_VALID bit
+ * set.
  */
 #define pte_access_permitted(pte, write) \
 	(pte_valid_user(pte) && (!(write) || pte_write(pte)))
@@ -139,13 +142,6 @@ static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot)
 	return pte;
 }
 
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
-	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
-	return pte;
-}
-
 static inline pte_t pte_mkwrite(pte_t pte)
 {
 	pte = set_pte_bit(pte, __pgprot(PTE_WRITE));
@@ -171,6 +167,20 @@ static inline pte_t pte_mkdirty(pte_t pte)
 	return pte;
 }
 
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	/*
+	 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
+	 * clear), set the PTE_DIRTY bit.
+	 */
+	if (pte_hw_dirty(pte))
+		pte = pte_mkdirty(pte);
+
+	pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
+	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+	return pte;
+}
+
 static inline pte_t pte_mkold(pte_t pte)
 {
 	return clear_pte_bit(pte, __pgprot(PTE_AF));
@@ -460,7 +470,9 @@ extern pgd_t init_pg_dir[PTRS_PER_PGD];
 extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
+extern pgd_t idmap_pg_end[];
 extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
+extern pgd_t reserved_pg_dir[PTRS_PER_PGD];
 
 extern void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd);
 
@@ -785,12 +797,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
 	pte = READ_ONCE(*ptep);
 	do {
 		old_pte = pte;
-		/*
-		 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
-		 * clear), set the PTE_DIRTY bit.
-		 */
-		if (pte_hw_dirty(pte))
-			pte = pte_mkdirty(pte);
 		pte = pte_wrprotect(pte);
 		pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
 					       pte_val(old_pte), pte_val(pte));
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/pointer_auth.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pointer_auth.h
index 7a24bad1a58b..076a4157a74f 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/pointer_auth.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/pointer_auth.h
@@ -3,7 +3,6 @@
 #define __ASM_POINTER_AUTH_H
 
 #include <linux/bitops.h>
-#include <linux/random.h>
 
 #include <asm/cpufeature.h>
 #include <asm/memory.h>
@@ -30,6 +29,13 @@ struct ptrauth_keys {
 	struct ptrauth_key apga;
 };
 
+/*
+ * Only include random.h once ptrauth_keys_* structures are defined
+ * to avoid yet another circular include hell (random.h * ends up
+ * including asm/smp.h, which requires ptrauth_keys_kernel).
+ */
+#include <linux/random.h>
+
 static inline void ptrauth_keys_init(struct ptrauth_keys *keys)
 {
 	if (system_supports_address_auth()) {
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/processor.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/processor.h
index 5623685c7d13..65834b84f0e1 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/processor.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/processor.h
@@ -184,8 +184,9 @@ void tls_preserve_current_state(void);
 
 static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
 {
+	s32 previous_syscall = regs->syscallno;
 	memset(regs, 0, sizeof(*regs));
-	forget_syscall(regs);
+	regs->syscallno = previous_syscall;
 	regs->pc = pc;
 
 	if (system_uses_irq_prio_masking())
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/ptrace.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/ptrace.h
index fbebb411ae20..92b2575b0191 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/ptrace.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/ptrace.h
@@ -62,6 +62,7 @@
 #define PSR_AA32_I_BIT		0x00000080
 #define PSR_AA32_A_BIT		0x00000100
 #define PSR_AA32_E_BIT		0x00000200
+#define PSR_AA32_PAN_BIT	0x00400000
 #define PSR_AA32_SSBS_BIT	0x00800000
 #define PSR_AA32_DIT_BIT	0x01000000
 #define PSR_AA32_Q_BIT		0x08000000
@@ -298,7 +299,17 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 
 static inline unsigned long regs_return_value(struct pt_regs *regs)
 {
-	return regs->regs[0];
+	unsigned long val = regs->regs[0];
+
+	/*
+	 * Audit currently uses regs_return_value() instead of
+	 * syscall_get_return_value(). Apply the same sign-extension here until
+	 * audit is updated to use syscall_get_return_value().
+	 */
+	if (compat_user_mode(regs))
+		val = sign_extend64(val, 31);
+
+	return val;
 }
 
 static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/sections.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/sections.h
index 788ae971f11c..a75f2882cc7c 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/sections.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/sections.h
@@ -15,8 +15,14 @@ extern char __hyp_text_start[], __hyp_text_end[];
 extern char __idmap_text_start[], __idmap_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __inittext_begin[], __inittext_end[];
+extern char __exittext_begin[], __exittext_end[];
 extern char __irqentry_text_start[], __irqentry_text_end[];
 extern char __mmuoff_data_start[], __mmuoff_data_end[];
 extern char __entry_tramp_text_start[], __entry_tramp_text_end[];
 
+static inline size_t entry_tramp_text_size(void)
+{
+	return __entry_tramp_text_end - __entry_tramp_text_start;
+}
+
 #endif /* __ASM_SECTIONS_H */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/smp.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/smp.h
index a0c8a0b65259..0eadbf933e35 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/smp.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/smp.h
@@ -46,7 +46,12 @@ DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number);
  * Logical CPU mapping.
  */
 extern u64 __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)    __cpu_logical_map[cpu]
+extern u64 cpu_logical_map(int cpu);
+
+static inline void set_cpu_logical_map(int cpu, u64 hwid)
+{
+	__cpu_logical_map[cpu] = hwid;
+}
 
 struct seq_file;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/syscall.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/syscall.h
index 65299a2dcf9c..03e20895453a 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/syscall.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/syscall.h
@@ -29,25 +29,36 @@ static inline void syscall_rollback(struct task_struct *task,
 	regs->regs[0] = regs->orig_x0;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	unsigned long val = regs->regs[0];
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = sign_extend64(val, 31);
+
+	return val;
+}
 
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	unsigned long error = regs->regs[0];
-	return IS_ERR_VALUE(error) ? error : 0;
-}
+	unsigned long error = syscall_get_return_value(task, regs);
 
-static inline long syscall_get_return_value(struct task_struct *task,
-					    struct pt_regs *regs)
-{
-	return regs->regs[0];
+	return IS_ERR_VALUE(error) ? error : 0;
 }
 
 static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	regs->regs[0] = (long) error ? error : val;
+	if (error)
+		val = error;
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = lower_32_bits(val);
+
+	regs->regs[0] = val;
 }
 
 #define SYSCALL_MAX_ARGS 6
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/syscall_wrapper.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/syscall_wrapper.h
index 06d880b3526c..43a20888bf19 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/syscall_wrapper.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/syscall_wrapper.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_SYSCALL_WRAPPER_H
 #define __ASM_SYSCALL_WRAPPER_H
 
-struct pt_regs;
+#include <asm/ptrace.h>
 
 #define SC_ARM64_REGS_TO_ARGS(x, ...)				\
 	__MAP(x,__SC_ARGS					\
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/sysreg.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/sysreg.h
index 6e919fafb43d..1ff93878c813 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/sysreg.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/sysreg.h
@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif
@@ -100,8 +102,14 @@
 #define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
 
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
+#define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
 #define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CGSW			sys_insn(1, 0, 7, 10, 4)
+#define SYS_DC_CGDSW			sys_insn(1, 0, 7, 10, 6)
 #define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+#define SYS_DC_CIGSW			sys_insn(1, 0, 7, 14, 4)
+#define SYS_DC_CIGDSW			sys_insn(1, 0, 7, 14, 6)
 
 #define SYS_OSDTRRX_EL1			sys_reg(2, 0, 0, 0, 2)
 #define SYS_MDCCINT_EL1			sys_reg(2, 0, 0, 2, 0)
@@ -163,6 +171,7 @@
 
 #define SYS_ID_AA64ISAR0_EL1		sys_reg(3, 0, 0, 6, 0)
 #define SYS_ID_AA64ISAR1_EL1		sys_reg(3, 0, 0, 6, 1)
+#define SYS_ID_AA64ISAR2_EL1		sys_reg(3, 0, 0, 6, 2)
 
 #define SYS_ID_AA64MMFR0_EL1		sys_reg(3, 0, 0, 7, 0)
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
@@ -573,6 +582,21 @@
 #define ID_AA64ISAR1_GPI_NI		0x0
 #define ID_AA64ISAR1_GPI_IMP_DEF	0x1
 
+/* id_aa64isar2 */
+#define ID_AA64ISAR2_CLEARBHB_SHIFT	28
+#define ID_AA64ISAR2_RPRES_SHIFT	4
+#define ID_AA64ISAR2_WFXT_SHIFT		0
+
+#define ID_AA64ISAR2_RPRES_8BIT		0x0
+#define ID_AA64ISAR2_RPRES_12BIT	0x1
+/*
+ * Value 0x1 has been removed from the architecture, and is
+ * reserved, but has not yet been removed from the ARM ARM
+ * as of ARM DDI 0487G.b.
+ */
+#define ID_AA64ISAR2_WFXT_NI		0x0
+#define ID_AA64ISAR2_WFXT_SUPPORTED	0x2
+
 /* id_aa64pfr0 */
 #define ID_AA64PFR0_CSV3_SHIFT		60
 #define ID_AA64PFR0_CSV2_SHIFT		56
@@ -644,6 +668,7 @@
 #endif
 
 /* id_aa64mmfr1 */
+#define ID_AA64MMFR1_ECBHB_SHIFT	60
 #define ID_AA64MMFR1_PAN_SHIFT		20
 #define ID_AA64MMFR1_LOR_SHIFT		16
 #define ID_AA64MMFR1_HPD_SHIFT		12
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/thread_info.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/thread_info.h
index f0cec4160136..4e3ed702bec7 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/thread_info.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/thread_info.h
@@ -91,6 +91,7 @@ void arch_release_task_struct(struct task_struct *tsk);
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_FSCHECK		(1 << TIF_FSCHECK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_SVE		(1 << TIF_SVE)
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/uaccess.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/uaccess.h
index 127712b0b970..b9a37a415bf9 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/uaccess.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/uaccess.h
@@ -62,8 +62,13 @@ static inline unsigned long __range_ok(const void __user *addr, unsigned long si
 {
 	unsigned long ret, limit = current_thread_info()->addr_limit;
 
+	/*
+	 * Asynchronous I/O running in a kernel thread does not have the
+	 * TIF_TAGGED_ADDR flag of the process owning the mm, so always untag
+	 * the user address before checking.
+	 */
 	if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI) &&
-	    test_thread_flag(TIF_TAGGED_ADDR))
+	    (current->flags & PF_KTHREAD || test_thread_flag(TIF_TAGGED_ADDR)))
 		addr = untagged_addr(addr);
 
 	__chk_user_ptr(addr);
@@ -107,8 +112,8 @@ static inline void __uaccess_ttbr0_disable(void)
 	local_irq_save(flags);
 	ttbr = read_sysreg(ttbr1_el1);
 	ttbr &= ~TTBR_ASID_MASK;
-	/* reserved_ttbr0 placed before swapper_pg_dir */
-	write_sysreg(ttbr - RESERVED_TTBR0_SIZE, ttbr0_el1);
+	/* reserved_pg_dir placed before swapper_pg_dir */
+	write_sysreg(ttbr - PAGE_SIZE, ttbr0_el1);
 	isb();
 	/* Set reserved ASID */
 	write_sysreg(ttbr, ttbr1_el1);
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/unistd.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/unistd.h
index 2629a68b8724..8c1b73dc8f55 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/unistd.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/unistd.h
@@ -25,8 +25,8 @@
 #define __NR_compat_gettimeofday	78
 #define __NR_compat_sigreturn		119
 #define __NR_compat_rt_sigreturn	173
-#define __NR_compat_clock_getres	247
 #define __NR_compat_clock_gettime	263
+#define __NR_compat_clock_getres	264
 #define __NR_compat_clock_gettime64	403
 #define __NR_compat_clock_getres_time64	406
 
@@ -42,7 +42,6 @@
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_CLONE3
 
 #ifndef __COMPAT_SYSCALL_NR
 #include <uapi/asm/unistd.h>
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/clocksource.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/clocksource.h
new file mode 100644
index 000000000000..8019f616e1f7
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/clocksource.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSOCLOCKSOURCE_H
+#define __ASM_VDSOCLOCKSOURCE_H
+
+enum vdso_arch_clockmode {
+	/* vdso clocksource not usable */
+	VDSO_CLOCKMODE_NONE,
+	/* vdso clocksource for both 32 and 64bit tasks */
+	VDSO_CLOCKMODE_ARCHTIMER,
+	/* vdso clocksource for 64bit tasks only */
+	VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT,
+};
+
+#endif
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/compat_gettimeofday.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/compat_gettimeofday.h
index c50ee1b7d5cd..413d42e197c7 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/compat_gettimeofday.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -10,6 +10,7 @@
 #include <asm/unistd.h>
 #include <uapi/linux/time.h>
 
+#include <asm/vdso/clocksource.h>
 #include <asm/vdso/compat_barrier.h>
 
 #define __VDSO_USE_SYSCALL		ULLONG_MAX
@@ -117,10 +118,10 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 	u64 res;
 
 	/*
-	 * clock_mode == 0 implies that vDSO are enabled otherwise
+	 * clock_mode == ARCHTIMER implies that vDSO are enabled otherwise
 	 * fallback on syscall.
 	 */
-	if (clock_mode)
+	if (clock_mode != VDSO_CLOCKMODE_ARCHTIMER)
 		return __VDSO_USE_SYSCALL;
 
 	/*
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/gettimeofday.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/gettimeofday.h
index b08f476b72b4..d7361faa42de 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/gettimeofday.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -10,6 +10,8 @@
 #include <asm/unistd.h>
 #include <uapi/linux/time.h>
 
+#include <asm/vdso/clocksource.h>
+
 #define __VDSO_USE_SYSCALL		ULLONG_MAX
 
 #define VDSO_HAS_CLOCK_GETRES		1
@@ -71,10 +73,10 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 	u64 res;
 
 	/*
-	 * clock_mode == 0 implies that vDSO are enabled otherwise
+	 * clock_mode != NONE implies that vDSO are enabled otherwise
 	 * fallback on syscall.
 	 */
-	if (clock_mode)
+	if (clock_mode == VDSO_CLOCKMODE_NONE)
 		return __VDSO_USE_SYSCALL;
 
 	/*
@@ -83,11 +85,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 	 */
 	isb();
 	asm volatile("mrs %0, cntvct_el0" : "=r" (res) :: "memory");
-	/*
-	 * This isb() is required to prevent that the seq lock is
-	 * speculated.#
-	 */
-	isb();
+	arch_counter_enforce_ordering(res);
 
 	return res;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/vsyscall.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/vsyscall.h
index 0c20a7c1bee5..e50f26741946 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/vdso/vsyscall.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vdso/vsyscall.h
@@ -24,9 +24,7 @@ struct vdso_data *__arm64_get_k_vdso_data(void)
 static __always_inline
 int __arm64_get_clock_mode(struct timekeeper *tk)
 {
-	u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct;
-
-	return use_syscall;
+	return tk->tkr_mono.clock->archdata.clock_mode;
 }
 #define __arch_get_clock_mode __arm64_get_clock_mode
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/vectors.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vectors.h
new file mode 100644
index 000000000000..bc9a2145f419
--- /dev/null
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/vectors.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef __ASM_VECTORS_H
+#define __ASM_VECTORS_H
+
+#include <linux/bug.h>
+#include <linux/percpu.h>
+
+#include <asm/fixmap.h>
+
+extern char vectors[];
+extern char tramp_vectors[];
+extern char __bp_harden_el1_vectors[];
+
+/*
+ * Note: the order of this enum corresponds to two arrays in entry.S:
+ * tramp_vecs and __bp_harden_el1_vectors. By default the canonical
+ * 'full fat' vectors are used directly.
+ */
+enum arm64_bp_harden_el1_vectors {
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	/*
+	 * Perform the BHB loop mitigation, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_LOOP,
+
+	/*
+	 * Make the SMC call for firmware mitigation, before branching to the
+	 * canonical vectors.
+	 */
+	EL1_VECTOR_BHB_FW,
+
+	/*
+	 * Use the ClearBHB instruction, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_CLEAR_INSN,
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+	/*
+	 * Remap the kernel before branching to the canonical vectors.
+	 */
+	EL1_VECTOR_KPTI,
+};
+
+#ifndef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+#define EL1_VECTOR_BHB_LOOP		-1
+#define EL1_VECTOR_BHB_FW		-1
+#define EL1_VECTOR_BHB_CLEAR_INSN	-1
+#endif /* !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+/* The vectors to use on return from EL0. e.g. to remap the kernel */
+DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
+
+#ifndef CONFIG_UNMAP_KERNEL_AT_EL0
+#define TRAMP_VALIAS	0ul
+#endif
+
+static inline const char *
+arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
+{
+	if (arm64_kernel_unmapped_at_el0())
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
+
+	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
+
+	return __bp_harden_el1_vectors + SZ_2K * slot;
+}
+
+#endif /* __ASM_VECTORS_H */
diff --git linux-libre-5.4-gnu1/arch/arm64/include/asm/word-at-a-time.h linux-libre-5.4.261-gnu1/arch/arm64/include/asm/word-at-a-time.h
index 3333950b5909..ea487218db79 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/asm/word-at-a-time.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/asm/word-at-a-time.h
@@ -53,7 +53,7 @@ static inline unsigned long find_zero(unsigned long mask)
  */
 static inline unsigned long load_unaligned_zeropad(const void *addr)
 {
-	unsigned long ret, offset;
+	unsigned long ret, tmp;
 
 	/* Load word from unaligned pointer addr */
 	asm(
@@ -61,9 +61,9 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"2:\n"
 	"	.pushsection .fixup,\"ax\"\n"
 	"	.align 2\n"
-	"3:	and	%1, %2, #0x7\n"
-	"	bic	%2, %2, #0x7\n"
-	"	ldr	%0, [%2]\n"
+	"3:	bic	%1, %2, #0x7\n"
+	"	ldr	%0, [%1]\n"
+	"	and	%1, %2, #0x7\n"
 	"	lsl	%1, %1, #0x3\n"
 #ifndef __AARCH64EB__
 	"	lsr	%0, %0, %1\n"
@@ -73,7 +73,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"	b	2b\n"
 	"	.popsection\n"
 	_ASM_EXTABLE(1b, 3b)
-	: "=&r" (ret), "=&r" (offset)
+	: "=&r" (ret), "=&r" (tmp)
 	: "r" (addr), "Q" (*(unsigned long *)addr));
 
 	return ret;
diff --git linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/kvm.h linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/kvm.h
index 67c21f9bdbad..08440ce57a1c 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/kvm.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/kvm.h
@@ -240,6 +240,11 @@ struct kvm_vcpu_events {
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
 
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
 /* SVE registers */
 #define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
 
diff --git linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/ptrace.h linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/ptrace.h
index 7ed9294e2004..d1bb5b69f1ce 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/ptrace.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/ptrace.h
@@ -49,6 +49,7 @@
 #define PSR_SSBS_BIT	0x00001000
 #define PSR_PAN_BIT	0x00400000
 #define PSR_UAO_BIT	0x00800000
+#define PSR_DIT_BIT	0x01000000
 #define PSR_V_BIT	0x10000000
 #define PSR_C_BIT	0x20000000
 #define PSR_Z_BIT	0x40000000
diff --git linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/unistd.h linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/unistd.h
index 4703d218663a..f83a70e07df8 100644
--- linux-libre-5.4-gnu1/arch/arm64/include/uapi/asm/unistd.h
+++ linux-libre-5.4.261-gnu1/arch/arm64/include/uapi/asm/unistd.h
@@ -19,5 +19,6 @@
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_TIME32_SYSCALLS
+#define __ARCH_WANT_SYS_CLONE3
 
 #include <asm-generic/unistd.h>
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/acpi.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/acpi.c
index 3a58e9db5cfe..46ec402e97ed 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/acpi.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/acpi.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irq_work.h>
 #include <linux/memblock.h>
 #include <linux/of_fdt.h>
 #include <linux/smp.h>
@@ -269,12 +270,19 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr)
 int apei_claim_sea(struct pt_regs *regs)
 {
 	int err = -ENOENT;
+	bool return_to_irqs_enabled;
 	unsigned long current_flags;
 
 	if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES))
 		return err;
 
-	current_flags = arch_local_save_flags();
+	current_flags = local_daif_save_flags();
+
+	/* current_flags isn't useful here as daif doesn't tell us about pNMI */
+	return_to_irqs_enabled = !irqs_disabled_flags(arch_local_save_flags());
+
+	if (regs)
+		return_to_irqs_enabled = interrupts_enabled(regs);
 
 	/*
 	 * SEA can interrupt SError, mask it and describe this as an NMI so
@@ -284,6 +292,23 @@ int apei_claim_sea(struct pt_regs *regs)
 	nmi_enter();
 	err = ghes_notify_sea();
 	nmi_exit();
+
+	/*
+	 * APEI NMI-like notifications are deferred to irq_work. Unless
+	 * we interrupted irqs-masked code, we can do that now.
+	 */
+	if (!err) {
+		if (return_to_irqs_enabled) {
+			local_daif_restore(DAIF_PROCCTX_NOIRQ);
+			__irq_enter();
+			irq_work_run();
+			__irq_exit();
+		} else {
+			pr_warn_ratelimited("APEI work queued but not completed");
+			err = -EINPROGRESS;
+		}
+	}
+
 	local_daif_restore(current_flags);
 
 	return err;
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/alternative.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/alternative.c
index d1757ef1b1e7..5f8e4c2df53c 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/alternative.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/alternative.c
@@ -41,27 +41,15 @@ bool alternative_is_applied(u16 cpufeature)
 /*
  * Check if the target PC is within an alternative block.
  */
-static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
+static __always_inline bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 {
-	unsigned long replptr;
-
-	if (kernel_text_address(pc))
-		return true;
-
-	replptr = (unsigned long)ALT_REPL_PTR(alt);
-	if (pc >= replptr && pc <= (replptr + alt->alt_len))
-		return false;
-
-	/*
-	 * Branching into *another* alternate sequence is doomed, and
-	 * we're not even trying to fix it up.
-	 */
-	BUG();
+	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
+	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
 }
 
 #define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
 
-static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
+static __always_inline u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
 {
 	u32 insn;
 
@@ -106,7 +94,7 @@ static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnp
 	return insn;
 }
 
-static void patch_alternative(struct alt_instr *alt,
+static noinstr void patch_alternative(struct alt_instr *alt,
 			      __le32 *origptr, __le32 *updptr, int nr_inst)
 {
 	__le32 *replptr;
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/armv8_deprecated.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/armv8_deprecated.c
index ca158be21f83..12b545f7fb32 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/armv8_deprecated.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/armv8_deprecated.c
@@ -59,6 +59,7 @@ struct insn_emulation {
 static LIST_HEAD(insn_emulation);
 static int nr_insn_emulated __initdata;
 static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
+static DEFINE_MUTEX(insn_emulation_mutex);
 
 static void register_emulation_hooks(struct insn_emulation_ops *ops)
 {
@@ -207,10 +208,12 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 				  loff_t *ppos)
 {
 	int ret = 0;
-	struct insn_emulation *insn = (struct insn_emulation *) table->data;
-	enum insn_emulation_mode prev_mode = insn->current_mode;
+	struct insn_emulation *insn;
+	enum insn_emulation_mode prev_mode;
 
-	table->data = &insn->current_mode;
+	mutex_lock(&insn_emulation_mutex);
+	insn = container_of(table->data, struct insn_emulation, current_mode);
+	prev_mode = insn->current_mode;
 	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 
 	if (ret || !write || prev_mode == insn->current_mode)
@@ -223,7 +226,7 @@ static int emulation_proc_handler(struct ctl_table *table, int write,
 		update_insn_emulation_mode(insn, INSN_UNDEF);
 	}
 ret:
-	table->data = insn;
+	mutex_unlock(&insn_emulation_mutex);
 	return ret;
 }
 
@@ -247,7 +250,7 @@ static void __init register_insn_emulation_sysctl(void)
 		sysctl->maxlen = sizeof(int);
 
 		sysctl->procname = insn->ops->name;
-		sysctl->data = insn;
+		sysctl->data = &insn->current_mode;
 		sysctl->extra1 = &insn->min;
 		sysctl->extra2 = &insn->max;
 		sysctl->proc_handler = emulation_proc_handler;
@@ -601,7 +604,7 @@ static struct undef_hook setend_hooks[] = {
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/cacheinfo.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/cacheinfo.c
index 7fa6828bb488..97c42be71338 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/cacheinfo.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/cacheinfo.c
@@ -43,9 +43,10 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 	this_leaf->type = type;
 }
 
-static int __init_cache_level(unsigned int cpu)
+int init_cache_level(unsigned int cpu)
 {
-	unsigned int ctype, level, leaves, fw_level;
+	unsigned int ctype, level, leaves;
+	int fw_level;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 
 	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
@@ -63,6 +64,9 @@ static int __init_cache_level(unsigned int cpu)
 	else
 		fw_level = acpi_find_last_cache_level(cpu);
 
+	if (fw_level < 0)
+		return fw_level;
+
 	if (level < fw_level) {
 		/*
 		 * some external caches not specified in CLIDR_EL1
@@ -78,7 +82,7 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
-static int __populate_cache_leaves(unsigned int cpu)
+int populate_cache_leaves(unsigned int cpu)
 {
 	unsigned int level, idx;
 	enum cache_type type;
@@ -97,6 +101,3 @@ static int __populate_cache_leaves(unsigned int cpu)
 	}
 	return 0;
 }
-
-DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level)
-DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/cpu_errata.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpu_errata.c
index 93f34b4eca25..342cba2ae982 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/cpu_errata.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpu_errata.c
@@ -13,6 +13,7 @@
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
 #include <asm/smp_plat.h>
+#include <asm/vectors.h>
 
 static bool __maybe_unused
 is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
@@ -88,13 +89,21 @@ has_mismatched_cache_type(const struct arm64_cpu_capabilities *entry,
 }
 
 static void
-cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *__unused)
+cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *cap)
 {
 	u64 mask = arm64_ftr_reg_ctrel0.strict_mask;
+	bool enable_uct_trap = false;
 
 	/* Trap CTR_EL0 access on this CPU, only if it has a mismatch */
 	if ((read_cpuid_cachetype() & mask) !=
 	    (arm64_ftr_reg_ctrel0.sys_val & mask))
+		enable_uct_trap = true;
+
+	/* ... or if the system is affected by an erratum */
+	if (cap->capability == ARM64_WORKAROUND_1542419)
+		enable_uct_trap = true;
+
+	if (enable_uct_trap)
 		sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0);
 }
 
@@ -108,6 +117,16 @@ DEFINE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
 #ifdef CONFIG_KVM_INDIRECT_VECTORS
 extern char __smccc_workaround_1_smc_start[];
 extern char __smccc_workaround_1_smc_end[];
+extern char __smccc_workaround_3_smc_start[];
+extern char __smccc_workaround_3_smc_end[];
+extern char __spectre_bhb_loop_k8_start[];
+extern char __spectre_bhb_loop_k8_end[];
+extern char __spectre_bhb_loop_k24_start[];
+extern char __spectre_bhb_loop_k24_end[];
+extern char __spectre_bhb_loop_k32_start[];
+extern char __spectre_bhb_loop_k32_end[];
+extern char __spectre_bhb_clearbhb_start[];
+extern char __spectre_bhb_clearbhb_end[];
 
 static void __copy_hyp_vect_bpi(int slot, const char *hyp_vecs_start,
 				const char *hyp_vecs_end)
@@ -121,11 +140,11 @@ static void __copy_hyp_vect_bpi(int slot, const char *hyp_vecs_start,
 	__flush_icache_range((uintptr_t)dst, (uintptr_t)dst + SZ_2K);
 }
 
+static DEFINE_RAW_SPINLOCK(bp_lock);
 static void install_bp_hardening_cb(bp_hardening_cb_t fn,
 				    const char *hyp_vecs_start,
 				    const char *hyp_vecs_end)
 {
-	static DEFINE_RAW_SPINLOCK(bp_lock);
 	int cpu, slot = -1;
 
 	/*
@@ -151,8 +170,12 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn,
 		__copy_hyp_vect_bpi(slot, hyp_vecs_start, hyp_vecs_end);
 	}
 
-	__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
-	__this_cpu_write(bp_hardening_data.fn, fn);
+	if (fn != __this_cpu_read(bp_hardening_data.fn)) {
+		__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
+		__this_cpu_write(bp_hardening_data.fn, fn);
+		__this_cpu_write(bp_hardening_data.template_start,
+				 hyp_vecs_start);
+	}
 	raw_spin_unlock(&bp_lock);
 }
 #else
@@ -484,6 +507,12 @@ out_printmsg:
 	return required;
 }
 
+static void cpu_enable_ssbd_mitigation(const struct arm64_cpu_capabilities *cap)
+{
+	if (ssbd_state != ARM64_SSBD_FORCE_DISABLE)
+		cap->matches(cap, SCOPE_LOCAL_CPU);
+}
+
 /* known invulnerable cores */
 static const struct midr_range arm64_ssb_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
@@ -575,6 +604,7 @@ static const struct midr_range spectre_v2_safe_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 	MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+	MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
 	{ /* sentinel */ }
 };
 
@@ -626,6 +656,12 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope)
 	return (need_wa > 0);
 }
 
+static void
+cpu_enable_branch_predictor_hardening(const struct arm64_cpu_capabilities *cap)
+{
+	cap->matches(cap, SCOPE_LOCAL_CPU);
+}
+
 static const __maybe_unused struct midr_range tx2_family_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
 	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
@@ -650,6 +686,18 @@ needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
 	return false;
 }
 
+static bool __maybe_unused
+has_neoverse_n1_erratum_1542419(const struct arm64_cpu_capabilities *entry,
+				int scope)
+{
+	u32 midr = read_cpuid_id();
+	bool has_dic = read_cpuid_cachetype() & BIT(CTR_DIC_SHIFT);
+	const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1);
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return is_midr_in_range(midr, &range) && has_dic;
+}
+
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 
 static const struct midr_range arm64_harden_el2_vectors[] = {
@@ -772,6 +820,14 @@ static const struct arm64_cpu_capabilities erratum_843419_list[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+static struct midr_range broken_aarch32_aes[] = {
+	MIDR_RANGE(MIDR_CORTEX_A57, 0, 1, 0xf, 0xf),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -873,9 +929,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 	},
 #endif
 	{
+		.desc = "Branch predictor hardening",
 		.capability = ARM64_HARDEN_BRANCH_PREDICTOR,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = check_branch_predictor,
+		.cpu_enable = cpu_enable_branch_predictor_hardening,
 	},
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 	{
@@ -889,13 +947,27 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_SSBD,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_ssbd_mitigation,
+		.cpu_enable = cpu_enable_ssbd_mitigation,
 		.midr_range_list = arm64_ssb_cpus,
 	},
+	{
+		.desc = "Spectre-BHB",
+		.capability = ARM64_SPECTRE_BHB,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = is_spectre_bhb_affected,
+		.cpu_enable = spectre_bhb_enable_mitigation,
+	},
 #ifdef CONFIG_ARM64_ERRATUM_1418040
 	{
 		.desc = "ARM erratum 1418040",
 		.capability = ARM64_WORKAROUND_1418040,
 		ERRATA_MIDR_RANGE_LIST(erratum_1418040_list),
+		/*
+		 * We need to allow affected CPUs to come in late, but
+		 * also need the non-affected CPUs to be able to come
+		 * in at any point in time. Wonderful.
+		 */
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_1165522
@@ -926,6 +998,24 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM,
 		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1542419
+	{
+		/* we depend on the firmware portion for correctness */
+		.desc = "ARM erratum 1542419 (kernel portion)",
+		.capability = ARM64_WORKAROUND_1542419,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_neoverse_n1_erratum_1542419,
+		.cpu_enable = cpu_enable_trap_ctr_access,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+	{
+		.desc = "ARM erratum 1742098",
+		.capability = ARM64_WORKAROUND_1742098,
+		CAP_MIDR_RANGE_LIST(broken_aarch32_aes),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+	},
 #endif
 	{
 	}
@@ -937,15 +1027,41 @@ ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
 }
 
+static const char *get_bhb_affected_string(enum mitigation_state bhb_state)
+{
+	switch (bhb_state) {
+	case SPECTRE_UNAFFECTED:
+		return "";
+	default:
+	case SPECTRE_VULNERABLE:
+		return ", but not BHB";
+	case SPECTRE_MITIGATED:
+		return ", BHB";
+	}
+}
+
 ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
 		char *buf)
 {
+	enum mitigation_state bhb_state = arm64_get_spectre_bhb_state();
+	const char *bhb_str = get_bhb_affected_string(bhb_state);
+	const char *v2_str = "Branch predictor hardening";
+
 	switch (get_spectre_v2_workaround_state()) {
 	case ARM64_BP_HARDEN_NOT_REQUIRED:
-		return sprintf(buf, "Not affected\n");
-        case ARM64_BP_HARDEN_WA_NEEDED:
-		return sprintf(buf, "Mitigation: Branch predictor hardening\n");
-        case ARM64_BP_HARDEN_UNKNOWN:
+		if (bhb_state == SPECTRE_UNAFFECTED)
+			return sprintf(buf, "Not affected\n");
+
+		/*
+		 * Platforms affected by Spectre-BHB can't report
+		 * "Not affected" for Spectre-v2.
+		 */
+		v2_str = "CSV2";
+		fallthrough;
+	case ARM64_BP_HARDEN_WA_NEEDED:
+		return sprintf(buf, "Mitigation: %s%s\n", v2_str, bhb_str);
+	case ARM64_BP_HARDEN_UNKNOWN:
+		fallthrough;
 	default:
 		return sprintf(buf, "Vulnerable\n");
 	}
@@ -967,3 +1083,348 @@ ssize_t cpu_show_spec_store_bypass(struct device *dev,
 
 	return sprintf(buf, "Vulnerable\n");
 }
+
+/*
+ * We try to ensure that the mitigation state can never change as the result of
+ * onlining a late CPU.
+ */
+static void update_mitigation_state(enum mitigation_state *oldp,
+				    enum mitigation_state new)
+{
+	enum mitigation_state state;
+
+	do {
+		state = READ_ONCE(*oldp);
+		if (new <= state)
+			break;
+	} while (cmpxchg_relaxed(oldp, state, new) != state);
+}
+
+/*
+ * Spectre BHB.
+ *
+ * A CPU is either:
+ * - Mitigated by a branchy loop a CPU specific number of times, and listed
+ *   in our "loop mitigated list".
+ * - Mitigated in software by the firmware Spectre v2 call.
+ * - Has the ClearBHB instruction to perform the mitigation.
+ * - Has the 'Exception Clears Branch History Buffer' (ECBHB) feature, so no
+ *   software mitigation in the vectors is needed.
+ * - Has CSV2.3, so is unaffected.
+ */
+static enum mitigation_state spectre_bhb_state;
+
+enum mitigation_state arm64_get_spectre_bhb_state(void)
+{
+	return spectre_bhb_state;
+}
+
+/*
+ * This must be called with SCOPE_LOCAL_CPU for each type of CPU, before any
+ * SCOPE_SYSTEM call will give the right answer.
+ */
+u8 spectre_bhb_loop_affected(int scope)
+{
+	u8 k = 0;
+	static u8 max_bhb_k;
+
+	if (scope == SCOPE_LOCAL_CPU) {
+		static const struct midr_range spectre_bhb_k32_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k24_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k11_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k8_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+			{},
+		};
+
+		if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k32_list))
+			k = 32;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list))
+			k = 24;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list))
+			k = 11;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list))
+			k =  8;
+
+		max_bhb_k = max(max_bhb_k, k);
+	} else {
+		k = max_bhb_k;
+	}
+
+	return k;
+}
+
+static enum mitigation_state spectre_bhb_get_cpu_fw_mitigation_state(void)
+{
+	int ret;
+	struct arm_smccc_res res;
+
+	if (psci_ops.smccc_version == SMCCC_VERSION_1_0)
+		return SPECTRE_VULNERABLE;
+
+	switch (psci_ops.conduit) {
+	case PSCI_CONDUIT_HVC:
+		arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+				  ARM_SMCCC_ARCH_WORKAROUND_3, &res);
+		break;
+
+	case PSCI_CONDUIT_SMC:
+		arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+				  ARM_SMCCC_ARCH_WORKAROUND_3, &res);
+		break;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+
+	ret = res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+	default:
+		fallthrough;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return SPECTRE_VULNERABLE;
+	}
+}
+
+static bool is_spectre_bhb_fw_affected(int scope)
+{
+	static bool system_affected;
+	enum mitigation_state fw_state;
+	bool has_smccc = (psci_ops.smccc_version >= SMCCC_VERSION_1_1);
+	static const struct midr_range spectre_bhb_firmware_mitigated_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A75),
+		{},
+	};
+	bool cpu_in_list = is_midr_in_range_list(read_cpuid_id(),
+					 spectre_bhb_firmware_mitigated_list);
+
+	if (scope != SCOPE_LOCAL_CPU)
+		return system_affected;
+
+	fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+	if (cpu_in_list || (has_smccc && fw_state == SPECTRE_MITIGATED)) {
+		system_affected = true;
+		return true;
+	}
+
+	return false;
+}
+
+static bool supports_ecbhb(int scope)
+{
+	u64 mmfr1;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		mmfr1 = read_sysreg_s(SYS_ID_AA64MMFR1_EL1);
+	else
+		mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+
+	return cpuid_feature_extract_unsigned_field(mmfr1,
+						    ID_AA64MMFR1_ECBHB_SHIFT);
+}
+
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry,
+			     int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	if (supports_csv2p3(scope))
+		return false;
+
+	if (supports_clearbhb(scope))
+		return true;
+
+	if (spectre_bhb_loop_affected(scope))
+		return true;
+
+	if (is_spectre_bhb_fw_affected(scope))
+		return true;
+
+	return false;
+}
+
+static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
+{
+	const char *v = arm64_get_bp_hardening_vector(slot);
+
+	if (slot < 0)
+		return;
+
+	__this_cpu_write(this_cpu_vector, v);
+
+	/*
+	 * When KPTI is in use, the vectors are switched when exiting to
+	 * user-space.
+	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return;
+
+	write_sysreg(v, vbar_el1);
+	isb();
+}
+
+#ifdef CONFIG_KVM_INDIRECT_VECTORS
+static const char *kvm_bhb_get_vecs_end(const char *start)
+{
+	if (start == __smccc_workaround_3_smc_start)
+		return __smccc_workaround_3_smc_end;
+	else if (start == __spectre_bhb_loop_k8_start)
+		return __spectre_bhb_loop_k8_end;
+	else if (start == __spectre_bhb_loop_k24_start)
+		return __spectre_bhb_loop_k24_end;
+	else if (start == __spectre_bhb_loop_k32_start)
+		return __spectre_bhb_loop_k32_end;
+	else if (start == __spectre_bhb_clearbhb_start)
+		return __spectre_bhb_clearbhb_end;
+
+	return NULL;
+}
+
+static void kvm_setup_bhb_slot(const char *hyp_vecs_start)
+{
+	int cpu, slot = -1;
+	const char *hyp_vecs_end;
+
+	if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available())
+		return;
+
+	hyp_vecs_end = kvm_bhb_get_vecs_end(hyp_vecs_start);
+	if (WARN_ON_ONCE(!hyp_vecs_start || !hyp_vecs_end))
+		return;
+
+	raw_spin_lock(&bp_lock);
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(bp_hardening_data.template_start, cpu) == hyp_vecs_start) {
+			slot = per_cpu(bp_hardening_data.hyp_vectors_slot, cpu);
+			break;
+		}
+	}
+
+	if (slot == -1) {
+		slot = atomic_inc_return(&arm64_el2_vector_last_slot);
+		BUG_ON(slot >= BP_HARDEN_EL2_SLOTS);
+		__copy_hyp_vect_bpi(slot, hyp_vecs_start, hyp_vecs_end);
+	}
+
+	if (hyp_vecs_start != __this_cpu_read(bp_hardening_data.template_start)) {
+		__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
+		__this_cpu_write(bp_hardening_data.template_start,
+				 hyp_vecs_start);
+	}
+	raw_spin_unlock(&bp_lock);
+}
+#else
+#define __smccc_workaround_3_smc_start NULL
+#define __spectre_bhb_loop_k8_start NULL
+#define __spectre_bhb_loop_k24_start NULL
+#define __spectre_bhb_loop_k32_start NULL
+#define __spectre_bhb_clearbhb_start NULL
+
+static void kvm_setup_bhb_slot(const char *hyp_vecs_start) { }
+#endif
+
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
+{
+	enum mitigation_state fw_state, state = SPECTRE_VULNERABLE;
+
+	if (!is_spectre_bhb_affected(entry, SCOPE_LOCAL_CPU))
+		return;
+
+	if (get_spectre_v2_workaround_state() == ARM64_BP_HARDEN_UNKNOWN) {
+		/* No point mitigating Spectre-BHB alone. */
+	} else if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY)) {
+		pr_info_once("spectre-bhb mitigation disabled by compile time option\n");
+	} else if (cpu_mitigations_off()) {
+		pr_info_once("spectre-bhb mitigation disabled by command line option\n");
+	} else if (supports_ecbhb(SCOPE_LOCAL_CPU)) {
+		state = SPECTRE_MITIGATED;
+	} else if (supports_clearbhb(SCOPE_LOCAL_CPU)) {
+		kvm_setup_bhb_slot(__spectre_bhb_clearbhb_start);
+		this_cpu_set_vectors(EL1_VECTOR_BHB_CLEAR_INSN);
+
+		state = SPECTRE_MITIGATED;
+	} else if (spectre_bhb_loop_affected(SCOPE_LOCAL_CPU)) {
+		switch (spectre_bhb_loop_affected(SCOPE_SYSTEM)) {
+		case 8:
+			/*
+			 * A57/A72-r0 will already have selected the
+			 * spectre-indirect vector, which is sufficient
+			 * for BHB too.
+			 */
+			if (!__this_cpu_read(bp_hardening_data.fn))
+				kvm_setup_bhb_slot(__spectre_bhb_loop_k8_start);
+			break;
+		case 24:
+			kvm_setup_bhb_slot(__spectre_bhb_loop_k24_start);
+			break;
+		case 32:
+			kvm_setup_bhb_slot(__spectre_bhb_loop_k32_start);
+			break;
+		default:
+			WARN_ON_ONCE(1);
+		}
+		this_cpu_set_vectors(EL1_VECTOR_BHB_LOOP);
+
+		state = SPECTRE_MITIGATED;
+	} else if (is_spectre_bhb_fw_affected(SCOPE_LOCAL_CPU)) {
+		fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+		if (fw_state == SPECTRE_MITIGATED) {
+			kvm_setup_bhb_slot(__smccc_workaround_3_smc_start);
+			this_cpu_set_vectors(EL1_VECTOR_BHB_FW);
+
+			/*
+			 * With WA3 in the vectors, the WA1 calls can be
+			 * removed.
+			 */
+			__this_cpu_write(bp_hardening_data.fn, NULL);
+
+			state = SPECTRE_MITIGATED;
+		}
+	}
+
+	update_mitigation_state(&spectre_bhb_state, state);
+}
+
+/* Patched to correct the immediate */
+void noinstr spectre_bhb_patch_loop_iter(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u8 rd;
+	u32 insn;
+	u16 loop_count = spectre_bhb_loop_affected(SCOPE_SYSTEM);
+
+	BUG_ON(nr_inst != 1); /* MOV -> MOV */
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY))
+		return;
+
+	insn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
+	insn = aarch64_insn_gen_movewide(rd, loop_count, 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr++ = cpu_to_le32(insn);
+}
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/cpufeature.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpufeature.c
index 80f459ad0190..396d96224b48 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/cpufeature.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpufeature.c
@@ -10,19 +10,23 @@
 #include <linux/bsearch.h>
 #include <linux/cpumask.h>
 #include <linux/crash_dump.h>
+#include <linux/percpu.h>
 #include <linux/sort.h>
 #include <linux/stop_machine.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/cpu.h>
+
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/cpu_ops.h>
 #include <asm/fpsimd.h>
+#include <asm/hwcap.h>
 #include <asm/mmu_context.h>
 #include <asm/processor.h>
 #include <asm/sysreg.h>
 #include <asm/traps.h>
+#include <asm/vectors.h>
 #include <asm/virt.h>
 
 /* Kernel representation of AT_HWCAP and AT_HWCAP2 */
@@ -32,9 +36,7 @@ static unsigned long elf_hwcap __read_mostly;
 #define COMPAT_ELF_HWCAP_DEFAULT	\
 				(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
 				 COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
-				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
-				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
-				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\
+				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_IDIV|\
 				 COMPAT_HWCAP_LPAE)
 unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
 unsigned int compat_elf_hwcap2 __read_mostly;
@@ -47,6 +49,8 @@ static struct arm64_cpu_capabilities const __ro_after_init *cpu_hwcaps_ptrs[ARM6
 /* Need also bit for ARM64_CB_PATCH */
 DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE);
 
+DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
+
 /*
  * Flag to indicate if we have computed the system wide
  * capabilities based on the boot time active CPUs. This
@@ -152,6 +156,11 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 	ARM64_FTR_END,
 };
 
+static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_CLEARBHB_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_CSV2_SHIFT, 4, 0),
@@ -162,11 +171,10 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
-	/* Linux doesn't care about the EL3 */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
 	ARM64_FTR_END,
 };
 
@@ -280,7 +288,6 @@ static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	 * of support.
 	 */
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
 	ARM64_FTR_END,
 };
@@ -322,7 +329,7 @@ static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+	/* [31:28] TraceFilt */
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
@@ -414,6 +421,7 @@ static const struct __ftr_reg_entry {
 	/* Op1 = 0, CRn = 0, CRm = 6 */
 	ARM64_FTR_REG(SYS_ID_AA64ISAR0_EL1, ftr_id_aa64isar0),
 	ARM64_FTR_REG(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1),
+	ARM64_FTR_REG(SYS_ID_AA64ISAR2_EL1, ftr_id_aa64isar2),
 
 	/* Op1 = 0, CRn = 0, CRm = 7 */
 	ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
@@ -585,6 +593,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 	init_cpu_ftr_reg(SYS_ID_AA64DFR1_EL1, info->reg_id_aa64dfr1);
 	init_cpu_ftr_reg(SYS_ID_AA64ISAR0_EL1, info->reg_id_aa64isar0);
 	init_cpu_ftr_reg(SYS_ID_AA64ISAR1_EL1, info->reg_id_aa64isar1);
+	init_cpu_ftr_reg(SYS_ID_AA64ISAR2_EL1, info->reg_id_aa64isar2);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR0_EL1, info->reg_id_aa64mmfr0);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR1_EL1, info->reg_id_aa64mmfr1);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
@@ -708,6 +717,8 @@ void update_cpu_features(int cpu,
 				      info->reg_id_aa64isar0, boot->reg_id_aa64isar0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR1_EL1, cpu,
 				      info->reg_id_aa64isar1, boot->reg_id_aa64isar1);
+	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR2_EL1, cpu,
+				      info->reg_id_aa64isar2, boot->reg_id_aa64isar2);
 
 	/*
 	 * Differing PARange support is fine as long as all peripherals and
@@ -721,9 +732,6 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 
-	/*
-	 * EL3 is not our concern.
-	 */
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
@@ -845,6 +853,7 @@ static u64 __read_sysreg_by_encoding(u32 sys_id)
 	read_sysreg_case(SYS_ID_AA64MMFR2_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR0_EL1);
 	read_sysreg_case(SYS_ID_AA64ISAR1_EL1);
+	read_sysreg_case(SYS_ID_AA64ISAR2_EL1);
 
 	read_sysreg_case(SYS_CNTFRQ_EL0);
 	read_sysreg_case(SYS_CTR_EL0);
@@ -1045,6 +1054,12 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
 	static bool kpti_applied = false;
 	int cpu = smp_processor_id();
 
+	if (__this_cpu_read(this_cpu_vector) == vectors) {
+		const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
+
+		__this_cpu_write(this_cpu_vector, v);
+	}
+
 	/*
 	 * We don't need to rewrite the page-tables if either we've done
 	 * it already or we have KASLR enabled and therefore have not
@@ -1098,7 +1113,7 @@ static bool cpu_has_broken_dbm(void)
 	/* List of CPUs which have broken DBM support. */
 	static const struct midr_range cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1024718
-		MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 1, 0),  // A55 r0p0 -r1p0
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 #endif
 		{},
 	};
@@ -1266,6 +1281,14 @@ static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry,
 }
 #endif
 
+static void elf_hwcap_fixup(void)
+{
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+	if (cpus_have_const_cap(ARM64_WORKAROUND_1742098))
+		compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES;
+#endif /* ARM64_ERRATUM_1742098 */
+}
+
 static const struct arm64_cpu_capabilities arm64_features[] = {
 	{
 		.desc = "GIC system register CPU interface",
@@ -1367,7 +1390,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 	{
 		/* FP/SIMD is not implemented */
 		.capability = ARM64_HAS_NO_FPSIMD,
-		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
 		.min_field_value = 0,
 		.matches = has_no_fpsimd,
 	},
@@ -1595,6 +1618,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.match_list = list,						\
 	}
 
+#define HWCAP_CAP_MATCH(match, cap_type, cap)					\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		.matches = match,						\
+	}
+
 #ifdef CONFIG_ARM64_PTR_AUTH
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 	{
@@ -1668,8 +1697,35 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	{},
 };
 
+#ifdef CONFIG_COMPAT
+static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	/*
+	 * Check that all of MVFR1_EL1.{SIMDSP, SIMDInt, SIMDLS} are available,
+	 * in line with that of arm32 as in vfp_init(). We make sure that the
+	 * check is future proof, by making sure value is non-zero.
+	 */
+	u32 mvfr1;
+
+	WARN_ON(scope == SCOPE_LOCAL_CPU && preemptible());
+	if (scope == SCOPE_SYSTEM)
+		mvfr1 = read_sanitised_ftr_reg(SYS_MVFR1_EL1);
+	else
+		mvfr1 = read_sysreg_s(SYS_MVFR1_EL1);
+
+	return cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDSP_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDINT_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDLS_SHIFT);
+}
+#endif
+
 static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = {
 #ifdef CONFIG_COMPAT
+	HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON),
+	HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_SIMDFMAC_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
+	/* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
 	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
 	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
 	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
@@ -2056,8 +2112,10 @@ void __init setup_cpu_features(void)
 	mark_const_caps_ready();
 	setup_elf_hwcaps(arm64_elf_hwcaps);
 
-	if (system_supports_32bit_el0())
+	if (system_supports_32bit_el0()) {
 		setup_elf_hwcaps(compat_elf_hwcaps);
+		elf_hwcap_fixup();
+	}
 
 	if (system_uses_ttbr0_pan())
 		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/cpuidle.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpuidle.c
index e4d6af2fdec7..5397f0d9e5bb 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/cpuidle.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpuidle.c
@@ -53,6 +53,9 @@ static int psci_acpi_cpu_init_idle(unsigned int cpu)
 	struct acpi_lpi_state *lpi;
 	struct acpi_processor *pr = per_cpu(processors, cpu);
 
+	if (unlikely(!pr || !pr->flags.has_lpi))
+		return -EINVAL;
+
 	/*
 	 * If the PSCI cpu_suspend function hook has not been initialized
 	 * idle states must not be enabled, so bail out
@@ -60,9 +63,6 @@ static int psci_acpi_cpu_init_idle(unsigned int cpu)
 	if (!psci_ops.cpu_suspend)
 		return -EOPNOTSUPP;
 
-	if (unlikely(!pr || !pr->flags.has_lpi))
-		return -EINVAL;
-
 	count = pr->power.count - 1;
 	if (count <= 0)
 		return -ENODEV;
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/cpuinfo.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpuinfo.c
index 05933c065732..90b35011a22f 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/cpuinfo.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/cpuinfo.c
@@ -344,6 +344,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
 	info->reg_id_aa64isar0 = read_cpuid(ID_AA64ISAR0_EL1);
 	info->reg_id_aa64isar1 = read_cpuid(ID_AA64ISAR1_EL1);
+	info->reg_id_aa64isar2 = read_cpuid(ID_AA64ISAR2_EL1);
 	info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
 	info->reg_id_aa64mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
 	info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/crash_dump.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/crash_dump.c
index e6e284265f19..58303a9ec32c 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/crash_dump.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/crash_dump.c
@@ -64,5 +64,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
 {
 	memcpy(buf, phys_to_virt((phys_addr_t)*ppos), count);
+	*ppos += count;
+
 	return count;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/debug-monitors.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/debug-monitors.c
index 48222a4760c2..62ab9d4f995e 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/debug-monitors.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/debug-monitors.c
@@ -141,17 +141,20 @@ postcore_initcall(debug_monitors_init);
 /*
  * Single step API and exception handling.
  */
-static void set_regs_spsr_ss(struct pt_regs *regs)
+static void set_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate |= DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(set_regs_spsr_ss);
+NOKPROBE_SYMBOL(set_user_regs_spsr_ss);
 
-static void clear_regs_spsr_ss(struct pt_regs *regs)
+static void clear_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate &= ~DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(clear_regs_spsr_ss);
+NOKPROBE_SYMBOL(clear_user_regs_spsr_ss);
+
+#define set_regs_spsr_ss(r)	set_user_regs_spsr_ss(&(r)->user_regs)
+#define clear_regs_spsr_ss(r)	clear_user_regs_spsr_ss(&(r)->user_regs)
 
 static DEFINE_SPINLOCK(debug_hook_lock);
 static LIST_HEAD(user_step_hook);
@@ -393,17 +396,26 @@ void user_rewind_single_step(struct task_struct *task)
 	 * If single step is active for this thread, then set SPSR.SS
 	 * to 1 to avoid returning to the active-pending state.
 	 */
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		set_regs_spsr_ss(task_pt_regs(task));
 }
 NOKPROBE_SYMBOL(user_rewind_single_step);
 
 void user_fastforward_single_step(struct task_struct *task)
 {
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		clear_regs_spsr_ss(task_pt_regs(task));
 }
 
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		set_user_regs_spsr_ss(regs);
+	else
+		clear_user_regs_spsr_ss(regs);
+}
+
 /* Kernel API */
 void kernel_enable_single_step(struct pt_regs *regs)
 {
@@ -429,6 +441,11 @@ int kernel_active_single_step(void)
 }
 NOKPROBE_SYMBOL(kernel_active_single_step);
 
+void kernel_rewind_single_step(struct pt_regs *regs)
+{
+	set_regs_spsr_ss(regs);
+}
+
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/efi.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/efi.c
index d0cf596db82c..14b7352bc05e 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/efi.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/efi.c
@@ -12,6 +12,14 @@
 
 #include <asm/efi.h>
 
+static bool region_is_misaligned(const efi_memory_desc_t *md)
+{
+	if (PAGE_SIZE == EFI_PAGE_SIZE)
+		return false;
+	return !PAGE_ALIGNED(md->phys_addr) ||
+	       !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT);
+}
+
 /*
  * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be
  * executable, everything else can be mapped with the XN bits
@@ -25,14 +33,22 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
 	if (type == EFI_MEMORY_MAPPED_IO)
 		return PROT_DEVICE_nGnRE;
 
-	if (WARN_ONCE(!PAGE_ALIGNED(md->phys_addr),
-		      "UEFI Runtime regions are not aligned to 64 KB -- buggy firmware?"))
+	if (region_is_misaligned(md)) {
+		static bool __initdata code_is_misaligned;
+
 		/*
-		 * If the region is not aligned to the page size of the OS, we
-		 * can not use strict permissions, since that would also affect
-		 * the mapping attributes of the adjacent regions.
+		 * Regions that are not aligned to the OS page size cannot be
+		 * mapped with strict permissions, as those might interfere
+		 * with the permissions that are needed by the adjacent
+		 * region's mapping. However, if we haven't encountered any
+		 * misaligned runtime code regions so far, we can safely use
+		 * non-executable permissions for non-code regions.
 		 */
-		return pgprot_val(PAGE_KERNEL_EXEC);
+		code_is_misaligned |= (type == EFI_RUNTIME_SERVICES_CODE);
+
+		return code_is_misaligned ? pgprot_val(PAGE_KERNEL_EXEC)
+					  : pgprot_val(PAGE_KERNEL);
+	}
 
 	/* R-- */
 	if ((attr & (EFI_MEMORY_XP | EFI_MEMORY_RO)) ==
@@ -62,19 +78,16 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 	bool page_mappings_only = (md->type == EFI_RUNTIME_SERVICES_CODE ||
 				   md->type == EFI_RUNTIME_SERVICES_DATA);
 
-	if (!PAGE_ALIGNED(md->phys_addr) ||
-	    !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT)) {
-		/*
-		 * If the end address of this region is not aligned to page
-		 * size, the mapping is rounded up, and may end up sharing a
-		 * page frame with the next UEFI memory region. If we create
-		 * a block entry now, we may need to split it again when mapping
-		 * the next region, and support for that is going to be removed
-		 * from the MMU routines. So avoid block mappings altogether in
-		 * that case.
-		 */
+	/*
+	 * If this region is not aligned to the page size used by the OS, the
+	 * mapping will be rounded outwards, and may end up sharing a page
+	 * frame with an adjacent runtime memory region. Given that the page
+	 * table descriptor covering the shared page will be rewritten when the
+	 * adjacent region gets mapped, we must avoid block mappings here so we
+	 * don't have to worry about splitting them when that happens.
+	 */
+	if (region_is_misaligned(md))
 		page_mappings_only = true;
-	}
 
 	create_pgd_mapping(mm, md->phys_addr, md->virt_addr,
 			   md->num_pages << EFI_PAGE_SHIFT,
@@ -101,6 +114,9 @@ int __init efi_set_mapping_permissions(struct mm_struct *mm,
 	BUG_ON(md->type != EFI_RUNTIME_SERVICES_CODE &&
 	       md->type != EFI_RUNTIME_SERVICES_DATA);
 
+	if (region_is_misaligned(md))
+		return 0;
+
 	/*
 	 * Calling apply_to_page_range() is only safe on regions that are
 	 * guaranteed to be mapped down to pages. Since we are only called
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/entry.S linux-libre-5.4.261-gnu1/arch/arm64/kernel/entry.S
index cf3bd2976e57..8a4c108a0c0b 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/entry.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/entry.S
@@ -59,18 +59,21 @@
 
 	.macro kernel_ventry, el, label, regsize = 64
 	.align 7
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-alternative_if ARM64_UNMAP_KERNEL_AT_EL0
+.Lventry_start\@:
 	.if	\el == 0
+	/*
+	 * This must be the first instruction of the EL0 vector entries. It is
+	 * skipped by the trampoline vectors, to trigger the cleanup.
+	 */
+	b	.Lskip_tramp_vectors_cleanup\@
 	.if	\regsize == 64
 	mrs	x30, tpidrro_el0
 	msr	tpidrro_el0, xzr
 	.else
 	mov	x30, xzr
 	.endif
+.Lskip_tramp_vectors_cleanup\@:
 	.endif
-alternative_else_nop_endif
-#endif
 
 	sub	sp, sp, #S_FRAME_SIZE
 #ifdef CONFIG_VMAP_STACK
@@ -116,11 +119,15 @@ alternative_else_nop_endif
 	mrs	x0, tpidrro_el0
 #endif
 	b	el\()\el\()_\label
+.org .Lventry_start\@ + 128	// Did we overflow the ventry slot?
 	.endm
 
-	.macro tramp_alias, dst, sym
+	.macro tramp_alias, dst, sym, tmp
 	mov_q	\dst, TRAMP_VALIAS
-	add	\dst, \dst, #(\sym - .entry.tramp.text)
+	adr_l	\tmp, \sym
+	add	\dst, \dst, \tmp
+	adr_l	\tmp, .entry.tramp.text
+	sub	\dst, \dst, \tmp
 	.endm
 
 	// This macro corrupts x0-x3. It is the caller's duty
@@ -361,21 +368,25 @@ alternative_else_nop_endif
 	ldp	x24, x25, [sp, #16 * 12]
 	ldp	x26, x27, [sp, #16 * 13]
 	ldp	x28, x29, [sp, #16 * 14]
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #S_FRAME_SIZE		// restore sp
 
 	.if	\el == 0
-alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0
+alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #S_FRAME_SIZE		// restore sp
+	eret
+alternative_else_nop_endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 	bne	5f
-	msr	far_el1, x30
-	tramp_alias	x30, tramp_exit_native
+	msr	far_el1, x29
+	tramp_alias	x30, tramp_exit_native, x29
 	br	x30
 5:
-	tramp_alias	x30, tramp_exit_compat
+	tramp_alias	x30, tramp_exit_compat, x29
 	br	x30
 #endif
 	.else
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #S_FRAME_SIZE		// restore sp
 	eret
 	.endif
 	sb
@@ -1012,15 +1023,10 @@ ENDPROC(el0_svc)
 
 	.popsection				// .entry.text
 
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-/*
- * Exception vectors trampoline.
- */
-	.pushsection ".entry.tramp.text", "ax"
-
+	// Move from tramp_pg_dir to swapper_pg_dir
 	.macro tramp_map_kernel, tmp
 	mrs	\tmp, ttbr1_el1
-	add	\tmp, \tmp, #(PAGE_SIZE + RESERVED_TTBR0_SIZE)
+	add	\tmp, \tmp, #(2 * PAGE_SIZE)
 	bic	\tmp, \tmp, #USER_ASID_FLAG
 	msr	ttbr1_el1, \tmp
 #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003
@@ -1037,9 +1043,10 @@ alternative_else_nop_endif
 #endif /* CONFIG_QCOM_FALKOR_ERRATUM_1003 */
 	.endm
 
+	// Move from swapper_pg_dir to tramp_pg_dir
 	.macro tramp_unmap_kernel, tmp
 	mrs	\tmp, ttbr1_el1
-	sub	\tmp, \tmp, #(PAGE_SIZE + RESERVED_TTBR0_SIZE)
+	sub	\tmp, \tmp, #(2 * PAGE_SIZE)
 	orr	\tmp, \tmp, #USER_ASID_FLAG
 	msr	ttbr1_el1, \tmp
 	/*
@@ -1049,12 +1056,47 @@ alternative_else_nop_endif
 	 */
 	.endm
 
-	.macro tramp_ventry, regsize = 64
+	.macro tramp_data_page	dst
+	adr_l	\dst, .entry.tramp.text
+	sub	\dst, \dst, PAGE_SIZE
+	.endm
+
+	.macro tramp_data_read_var	dst, var
+#ifdef CONFIG_RANDOMIZE_BASE
+	tramp_data_page		\dst
+	add	\dst, \dst, #:lo12:__entry_tramp_data_\var
+	ldr	\dst, [\dst]
+#else
+	ldr	\dst, =\var
+#endif
+	.endm
+
+#define BHB_MITIGATION_NONE	0
+#define BHB_MITIGATION_LOOP	1
+#define BHB_MITIGATION_FW	2
+#define BHB_MITIGATION_INSN	3
+
+	.macro tramp_ventry, vector_start, regsize, kpti, bhb
 	.align	7
 1:
 	.if	\regsize == 64
 	msr	tpidrro_el0, x30	// Restored in kernel_ventry
 	.endif
+
+	.if	\bhb == BHB_MITIGATION_LOOP
+	/*
+	 * This sequence must appear before the first indirect branch. i.e. the
+	 * ret out of tramp_ventry. It appears here because x30 is free.
+	 */
+	__mitigate_spectre_bhb_loop	x30
+	.endif // \bhb == BHB_MITIGATION_LOOP
+
+	.if	\bhb == BHB_MITIGATION_INSN
+	clearbhb
+	isb
+	.endif // \bhb == BHB_MITIGATION_INSN
+
+	.if	\kpti == 1
 	/*
 	 * Defend against branch aliasing attacks by pushing a dummy
 	 * entry onto the return stack and using a RET instruction to
@@ -1064,46 +1106,79 @@ alternative_else_nop_endif
 	b	.
 2:
 	tramp_map_kernel	x30
-#ifdef CONFIG_RANDOMIZE_BASE
-	adr	x30, tramp_vectors + PAGE_SIZE
 alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
-	ldr	x30, [x30]
-#else
-	ldr	x30, =vectors
-#endif
+	tramp_data_read_var	x30, vectors
 alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM
-	prfm	plil1strm, [x30, #(1b - tramp_vectors)]
+	prfm	plil1strm, [x30, #(1b - \vector_start)]
 alternative_else_nop_endif
+
 	msr	vbar_el1, x30
-	add	x30, x30, #(1b - tramp_vectors)
 	isb
+	.else
+	ldr	x30, =vectors
+	.endif // \kpti == 1
+
+	.if	\bhb == BHB_MITIGATION_FW
+	/*
+	 * The firmware sequence must appear before the first indirect branch.
+	 * i.e. the ret out of tramp_ventry. But it also needs the stack to be
+	 * mapped to save/restore the registers the SMC clobbers.
+	 */
+	__mitigate_spectre_bhb_fw
+	.endif // \bhb == BHB_MITIGATION_FW
+
+	add	x30, x30, #(1b - \vector_start + 4)
 	ret
+.org 1b + 128	// Did we overflow the ventry slot?
 	.endm
 
 	.macro tramp_exit, regsize = 64
-	adr	x30, tramp_vectors
+	tramp_data_read_var	x30, this_cpu_vector
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
+	mrs	x29, tpidr_el1
+alternative_else
+	mrs	x29, tpidr_el2
+alternative_endif
+	ldr	x30, [x30, x29]
+
 	msr	vbar_el1, x30
-	tramp_unmap_kernel	x30
+	ldr	lr, [sp, #S_LR]
+	tramp_unmap_kernel	x29
 	.if	\regsize == 64
-	mrs	x30, far_el1
+	mrs	x29, far_el1
 	.endif
+	add	sp, sp, #S_FRAME_SIZE		// restore sp
 	eret
 	sb
 	.endm
 
-	.align	11
-ENTRY(tramp_vectors)
+	.macro	generate_tramp_vector,	kpti, bhb
+.Lvector_start\@:
 	.space	0x400
 
-	tramp_ventry
-	tramp_ventry
-	tramp_ventry
-	tramp_ventry
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, \kpti, \bhb
+	.endr
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 32, \kpti, \bhb
+	.endr
+	.endm
 
-	tramp_ventry	32
-	tramp_ventry	32
-	tramp_ventry	32
-	tramp_ventry	32
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+/*
+ * Exception vectors trampoline.
+ * The order must match __bp_harden_el1_vectors and the
+ * arm64_bp_harden_el1_vectors enum.
+ */
+	.pushsection ".entry.tramp.text", "ax"
+	.align	11
+ENTRY(tramp_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_LOOP
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_FW
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_NONE
 END(tramp_vectors)
 
 ENTRY(tramp_exit_native)
@@ -1121,11 +1196,55 @@ END(tramp_exit_compat)
 	.align PAGE_SHIFT
 	.globl	__entry_tramp_data_start
 __entry_tramp_data_start:
+__entry_tramp_data_vectors:
 	.quad	vectors
+#ifdef CONFIG_ARM_SDE_INTERFACE
+__entry_tramp_data___sdei_asm_handler:
+	.quad	__sdei_asm_handler
+#endif /* CONFIG_ARM_SDE_INTERFACE */
+__entry_tramp_data_this_cpu_vector:
+	.quad	this_cpu_vector
 	.popsection				// .rodata
 #endif /* CONFIG_RANDOMIZE_BASE */
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
+/*
+ * Exception vectors for spectre mitigations on entry from EL1 when
+ * kpti is not in use.
+ */
+	.macro generate_el1_vector, bhb
+.Lvector_start\@:
+	kernel_ventry	1, sync_invalid			// Synchronous EL1t
+	kernel_ventry	1, irq_invalid			// IRQ EL1t
+	kernel_ventry	1, fiq_invalid			// FIQ EL1t
+	kernel_ventry	1, error_invalid		// Error EL1t
+
+	kernel_ventry	1, sync				// Synchronous EL1h
+	kernel_ventry	1, irq				// IRQ EL1h
+	kernel_ventry	1, fiq_invalid			// FIQ EL1h
+	kernel_ventry	1, error			// Error EL1h
+
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, 0, \bhb
+	.endr
+	.rept 4
+	tramp_ventry	.Lvector_start\@, 32, 0, \bhb
+	.endr
+	.endm
+
+/* The order must match tramp_vecs and the arm64_bp_harden_el1_vectors enum. */
+	.pushsection ".entry.text", "ax"
+	.align	11
+SYM_CODE_START(__bp_harden_el1_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_el1_vector	bhb=BHB_MITIGATION_LOOP
+	generate_el1_vector	bhb=BHB_MITIGATION_FW
+	generate_el1_vector	bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+SYM_CODE_END(__bp_harden_el1_vectors)
+	.popsection
+
+
 /*
  * Register switch for AArch64. The callee-saved registers need to be saved
  * and restored. On entry:
@@ -1212,13 +1331,7 @@ ENTRY(__sdei_asm_entry_trampoline)
 	 */
 1:	str	x4, [x1, #(SDEI_EVENT_INTREGS + S_ORIG_ADDR_LIMIT)]
 
-#ifdef CONFIG_RANDOMIZE_BASE
-	adr	x4, tramp_vectors + PAGE_SIZE
-	add	x4, x4, #:lo12:__sdei_asm_trampoline_next_handler
-	ldr	x4, [x4]
-#else
-	ldr	x4, =__sdei_asm_handler
-#endif
+	tramp_data_read_var     x4, __sdei_asm_handler
 	br	x4
 ENDPROC(__sdei_asm_entry_trampoline)
 NOKPROBE(__sdei_asm_entry_trampoline)
@@ -1241,12 +1354,6 @@ ENDPROC(__sdei_asm_exit_trampoline)
 NOKPROBE(__sdei_asm_exit_trampoline)
 	.ltorg
 .popsection		// .entry.tramp.text
-#ifdef CONFIG_RANDOMIZE_BASE
-.pushsection ".rodata", "a"
-__sdei_asm_trampoline_next_handler:
-	.quad	__sdei_asm_handler
-.popsection		// .rodata
-#endif /* CONFIG_RANDOMIZE_BASE */
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
 /*
@@ -1342,7 +1449,7 @@ alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
 alternative_else_nop_endif
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-	tramp_alias	dst=x5, sym=__sdei_asm_exit_trampoline
+	tramp_alias	dst=x5, sym=__sdei_asm_exit_trampoline, tmp=x3
 	br	x5
 #endif
 ENDPROC(__sdei_asm_handler)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/fpsimd.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/fpsimd.c
index 37d3912cfe06..e62c9cbf99f4 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/fpsimd.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/fpsimd.c
@@ -269,6 +269,7 @@ static void sve_free(struct task_struct *task)
  */
 static void task_fpsimd_load(void)
 {
+	WARN_ON(!system_supports_fpsimd());
 	WARN_ON(!have_cpu_fpsimd_context());
 
 	if (system_supports_sve() && test_thread_flag(TIF_SVE))
@@ -289,6 +290,7 @@ static void fpsimd_save(void)
 		this_cpu_ptr(&fpsimd_last_state);
 	/* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */
 
+	WARN_ON(!system_supports_fpsimd());
 	WARN_ON(!have_cpu_fpsimd_context());
 
 	if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
@@ -336,7 +338,7 @@ static unsigned int find_supported_vector_length(unsigned int vl)
 	return sve_vl_from_vq(__bit_to_vq(bit));
 }
 
-#ifdef CONFIG_SYSCTL
+#if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL)
 
 static int sve_proc_do_default_vl(struct ctl_table *table, int write,
 				  void __user *buffer, size_t *lenp,
@@ -382,9 +384,9 @@ static int __init sve_sysctl_init(void)
 	return 0;
 }
 
-#else /* ! CONFIG_SYSCTL */
+#else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
 static int __init sve_sysctl_init(void) { return 0; }
-#endif /* ! CONFIG_SYSCTL */
+#endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
 
 #define ZREG(sve_state, vq, n) ((char *)(sve_state) +		\
 	(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -496,7 +498,7 @@ size_t sve_state_size(struct task_struct const *task)
 void sve_alloc(struct task_struct *task)
 {
 	if (task->thread.sve_state) {
-		memset(task->thread.sve_state, 0, sve_state_size(current));
+		memset(task->thread.sve_state, 0, sve_state_size(task));
 		return;
 	}
 
@@ -1092,6 +1094,7 @@ void fpsimd_bind_task_to_cpu(void)
 	struct fpsimd_last_state_struct *last =
 		this_cpu_ptr(&fpsimd_last_state);
 
+	WARN_ON(!system_supports_fpsimd());
 	last->st = &current->thread.uw.fpsimd_state;
 	last->sve_state = current->thread.sve_state;
 	last->sve_vl = current->thread.sve_vl;
@@ -1114,6 +1117,7 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state,
 	struct fpsimd_last_state_struct *last =
 		this_cpu_ptr(&fpsimd_last_state);
 
+	WARN_ON(!system_supports_fpsimd());
 	WARN_ON(!in_softirq() && !irqs_disabled());
 
 	last->st = st;
@@ -1128,8 +1132,19 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state,
  */
 void fpsimd_restore_current_state(void)
 {
-	if (!system_supports_fpsimd())
+	/*
+	 * For the tasks that were created before we detected the absence of
+	 * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(),
+	 * e.g, init. This could be then inherited by the children processes.
+	 * If we later detect that the system doesn't support FP/SIMD,
+	 * we must clear the flag for  all the tasks to indicate that the
+	 * FPSTATE is clean (as we can't have one) to avoid looping for ever in
+	 * do_notify_resume().
+	 */
+	if (!system_supports_fpsimd()) {
+		clear_thread_flag(TIF_FOREIGN_FPSTATE);
 		return;
+	}
 
 	get_cpu_fpsimd_context();
 
@@ -1148,7 +1163,7 @@ void fpsimd_restore_current_state(void)
  */
 void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 {
-	if (!system_supports_fpsimd())
+	if (WARN_ON(!system_supports_fpsimd()))
 		return;
 
 	get_cpu_fpsimd_context();
@@ -1179,7 +1194,13 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 void fpsimd_flush_task_state(struct task_struct *t)
 {
 	t->thread.fpsimd_cpu = NR_CPUS;
-
+	/*
+	 * If we don't support fpsimd, bail out after we have
+	 * reset the fpsimd_cpu for this task and clear the
+	 * FPSTATE.
+	 */
+	if (!system_supports_fpsimd())
+		return;
 	barrier();
 	set_tsk_thread_flag(t, TIF_FOREIGN_FPSTATE);
 
@@ -1193,6 +1214,7 @@ void fpsimd_flush_task_state(struct task_struct *t)
  */
 static void fpsimd_flush_cpu_state(void)
 {
+	WARN_ON(!system_supports_fpsimd());
 	__this_cpu_write(fpsimd_last_state.st, NULL);
 	set_thread_flag(TIF_FOREIGN_FPSTATE);
 }
@@ -1203,6 +1225,8 @@ static void fpsimd_flush_cpu_state(void)
  */
 void fpsimd_save_and_flush_cpu_state(void)
 {
+	if (!system_supports_fpsimd())
+		return;
 	WARN_ON(preemptible());
 	__get_cpu_fpsimd_context();
 	fpsimd_save();
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/ftrace.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/ftrace.c
index 06e56b470315..d4a4be02d309 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/ftrace.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/ftrace.c
@@ -69,13 +69,25 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long pc = rec->ip;
 	u32 old, new;
-	long offset = (long)pc - (long)addr;
+	long offset = (long)addr - (long)pc;
 
 	if (offset < -SZ_128M || offset >= SZ_128M) {
 #ifdef CONFIG_ARM64_MODULE_PLTS
-		struct plt_entry trampoline, *dst;
 		struct module *mod;
 
+		/*
+		 * There is only one ftrace trampoline per module. For now,
+		 * this is not a problem since on arm64, all dynamic ftrace
+		 * invocations are routed via ftrace_caller(). This will need
+		 * to be revisited if support for multiple ftrace entry points
+		 * is added in the future, but for now, the pr_err() below
+		 * deals with a theoretical issue only.
+		 */
+		if (addr != FTRACE_ADDR) {
+			pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n");
+			return -EINVAL;
+		}
+
 		/*
 		 * On kernels that support module PLTs, the offset between the
 		 * branch instruction and its target may legally exceed the
@@ -93,46 +105,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		if (WARN_ON(!mod))
 			return -EINVAL;
 
-		/*
-		 * There is only one ftrace trampoline per module. For now,
-		 * this is not a problem since on arm64, all dynamic ftrace
-		 * invocations are routed via ftrace_caller(). This will need
-		 * to be revisited if support for multiple ftrace entry points
-		 * is added in the future, but for now, the pr_err() below
-		 * deals with a theoretical issue only.
-		 *
-		 * Note that PLTs are place relative, and plt_entries_equal()
-		 * checks whether they point to the same target. Here, we need
-		 * to check if the actual opcodes are in fact identical,
-		 * regardless of the offset in memory so use memcmp() instead.
-		 */
-		dst = mod->arch.ftrace_trampoline;
-		trampoline = get_plt_entry(addr, dst);
-		if (memcmp(dst, &trampoline, sizeof(trampoline))) {
-			if (plt_entry_is_initialized(dst)) {
-				pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n");
-				return -EINVAL;
-			}
-
-			/* point the trampoline to our ftrace entry point */
-			module_disable_ro(mod);
-			*dst = trampoline;
-			module_enable_ro(mod, true);
-
-			/*
-			 * Ensure updated trampoline is visible to instruction
-			 * fetch before we patch in the branch. Although the
-			 * architecture doesn't require an IPI in this case,
-			 * Neoverse-N1 erratum #1542419 does require one
-			 * if the TLB maintenance in module_enable_ro() is
-			 * skipped due to rodata_enabled. It doesn't seem worth
-			 * it to make it conditional given that this is
-			 * certainly not a fast-path.
-			 */
-			flush_icache_range((unsigned long)&dst[0],
-					   (unsigned long)&dst[1]);
-		}
-		addr = (unsigned long)dst;
+		addr = (unsigned long)mod->arch.ftrace_trampoline;
 #else /* CONFIG_ARM64_MODULE_PLTS */
 		return -EINVAL;
 #endif /* CONFIG_ARM64_MODULE_PLTS */
@@ -153,7 +126,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 	unsigned long pc = rec->ip;
 	bool validate = true;
 	u32 old = 0, new;
-	long offset = (long)pc - (long)addr;
+	long offset = (long)addr - (long)pc;
 
 	if (offset < -SZ_128M || offset >= SZ_128M) {
 #ifdef CONFIG_ARM64_MODULE_PLTS
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/head.S linux-libre-5.4.261-gnu1/arch/arm64/kernel/head.S
index 989b1944cb71..2f784d3b4b39 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/head.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/head.S
@@ -194,7 +194,7 @@ ENDPROC(preserve_boot_args)
  * to be composed of multiple pages. (This effectively scales the end index).
  *
  *	vstart:	virtual address of start of range
- *	vend:	virtual address of end of range
+ *	vend:	virtual address of end of range - we map [vstart, vend]
  *	shift:	shift used to transform virtual address into index
  *	ptrs:	number of entries in page table
  *	istart:	index in table corresponding to vstart
@@ -231,17 +231,18 @@ ENDPROC(preserve_boot_args)
  *
  *	tbl:	location of page table
  *	rtbl:	address to be used for first level page table entry (typically tbl + PAGE_SIZE)
- *	vstart:	start address to map
- *	vend:	end address to map - we map [vstart, vend]
+ *	vstart:	virtual address of start of range
+ *	vend:	virtual address of end of range - we map [vstart, vend - 1]
  *	flags:	flags to use to map last level entries
  *	phys:	physical address corresponding to vstart - physical memory is contiguous
  *	pgds:	the number of pgd entries
  *
  * Temporaries:	istart, iend, tmp, count, sv - these need to be different registers
- * Preserves:	vstart, vend, flags
- * Corrupts:	tbl, rtbl, istart, iend, tmp, count, sv
+ * Preserves:	vstart, flags
+ * Corrupts:	tbl, rtbl, vend, istart, iend, tmp, count, sv
  */
 	.macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv
+	sub \vend, \vend, #1
 	add \rtbl, \tbl, #PAGE_SIZE
 	mov \sv, \rtbl
 	mov \count, #0
@@ -337,7 +338,7 @@ __create_page_tables:
 	 */
 	adrp	x5, __idmap_text_end
 	clz	x5, x5
-	cmp	x5, TCR_T0SZ(VA_BITS)	// default T0SZ small enough?
+	cmp	x5, TCR_T0SZ(VA_BITS_MIN) // default T0SZ small enough?
 	b.ge	1f			// .. then skip VA range extension
 
 	adr_l	x6, idmap_t0sz
@@ -393,13 +394,19 @@ __create_page_tables:
 
 	/*
 	 * Since the page tables have been populated with non-cacheable
-	 * accesses (MMU disabled), invalidate the idmap and swapper page
-	 * tables again to remove any speculatively loaded cache lines.
+	 * accesses (MMU disabled), invalidate those tables again to
+	 * remove any speculatively loaded cache lines.
 	 */
+	dmb	sy
+
 	adrp	x0, idmap_pg_dir
+	adrp	x1, idmap_pg_end
+	sub	x1, x1, x0
+	bl	__inval_dcache_area
+
+	adrp	x0, init_pg_dir
 	adrp	x1, init_pg_end
 	sub	x1, x1, x0
-	dmb	sy
 	bl	__inval_dcache_area
 
 	ret	x28
@@ -964,6 +971,7 @@ __primary_switch:
 
 	tlbi	vmalle1				// Remove any stale TLB entries
 	dsb	nsh
+	isb
 
 	msr	sctlr_el1, x19			// re-enable the MMU
 	isb
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/hw_breakpoint.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/hw_breakpoint.c
index 38ee1514cd9c..534578eba556 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/hw_breakpoint.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/hw_breakpoint.c
@@ -654,7 +654,7 @@ static int breakpoint_handler(unsigned long unused, unsigned int esr,
 		perf_bp_event(bp, regs);
 
 		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(bp))
+		if (uses_default_overflow_handler(bp))
 			step = 1;
 unlock:
 		rcu_read_unlock();
@@ -730,6 +730,27 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
 		return 0;
 }
 
+static int watchpoint_report(struct perf_event *wp, unsigned long addr,
+			     struct pt_regs *regs)
+{
+	int step = uses_default_overflow_handler(wp);
+	struct arch_hw_breakpoint *info = counter_arch_bp(wp);
+
+	info->trigger = addr;
+
+	/*
+	 * If we triggered a user watchpoint from a uaccess routine, then
+	 * handle the stepping ourselves since userspace really can't help
+	 * us with this.
+	 */
+	if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0)
+		step = 1;
+	else
+		perf_bp_event(wp, regs);
+
+	return step;
+}
+
 static int watchpoint_handler(unsigned long addr, unsigned int esr,
 			      struct pt_regs *regs)
 {
@@ -739,7 +760,6 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 	u64 val;
 	struct perf_event *wp, **slots;
 	struct debug_info *debug_info;
-	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
@@ -777,25 +797,13 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 		if (dist != 0)
 			continue;
 
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
-
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
+		step = watchpoint_report(wp, addr, regs);
 	}
-	if (min_dist > 0 && min_dist != -1) {
-		/* No exact match found. */
-		wp = slots[closest_match];
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
 
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
-	}
+	/* No exact match found? */
+	if (min_dist > 0 && min_dist != -1)
+		step = watchpoint_report(slots[closest_match], addr, regs);
+
 	rcu_read_unlock();
 
 	if (!step)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/insn.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/insn.c
index d801a7094076..a02c294a4753 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/insn.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/insn.c
@@ -21,6 +21,7 @@
 #include <asm/fixmap.h>
 #include <asm/insn.h>
 #include <asm/kprobes.h>
+#include <asm/sections.h>
 
 #define AARCH64_INSN_SF_BIT	BIT(31)
 #define AARCH64_INSN_N_BIT	BIT(22)
@@ -78,16 +79,29 @@ bool aarch64_insn_is_branch_imm(u32 insn)
 
 static DEFINE_RAW_SPINLOCK(patch_lock);
 
+static bool is_exit_text(unsigned long addr)
+{
+	/* discarded with init text/data */
+	return system_state < SYSTEM_RUNNING &&
+		addr >= (unsigned long)__exittext_begin &&
+		addr < (unsigned long)__exittext_end;
+}
+
+static bool is_image_text(unsigned long addr)
+{
+	return core_kernel_text(addr) || is_exit_text(addr);
+}
+
 static void __kprobes *patch_map(void *addr, int fixmap)
 {
 	unsigned long uintaddr = (uintptr_t) addr;
-	bool module = !core_kernel_text(uintaddr);
+	bool image = is_image_text(uintaddr);
 	struct page *page;
 
-	if (module && IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
-		page = vmalloc_to_page(addr);
-	else if (!module)
+	if (image)
 		page = phys_to_page(__pa_symbol(addr));
+	else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
+		page = vmalloc_to_page(addr);
 	else
 		return addr;
 
@@ -193,8 +207,8 @@ static int __kprobes aarch64_insn_patch_text_cb(void *arg)
 	int i, ret = 0;
 	struct aarch64_insn_patch *pp = arg;
 
-	/* The first CPU becomes master */
-	if (atomic_inc_return(&pp->cpu_count) == 1) {
+	/* The last CPU becomes master */
+	if (atomic_inc_return(&pp->cpu_count) == num_online_cpus()) {
 		for (i = 0; ret == 0 && i < pp->insn_cnt; i++)
 			ret = aarch64_insn_patch_text_nosync(pp->text_addrs[i],
 							     pp->new_insns[i]);
@@ -1508,16 +1522,10 @@ static u32 aarch64_encode_immediate(u64 imm,
 				    u32 insn)
 {
 	unsigned int immr, imms, n, ones, ror, esz, tmp;
-	u64 mask = ~0UL;
-
-	/* Can't encode full zeroes or full ones */
-	if (!imm || !~imm)
-		return AARCH64_BREAK_FAULT;
+	u64 mask;
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		if (upper_32_bits(imm))
-			return AARCH64_BREAK_FAULT;
 		esz = 32;
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
@@ -1529,6 +1537,12 @@ static u32 aarch64_encode_immediate(u64 imm,
 		return AARCH64_BREAK_FAULT;
 	}
 
+	mask = GENMASK(esz - 1, 0);
+
+	/* Can't encode full zeroes, full ones, or value wider than the mask */
+	if (!imm || imm == mask || imm & ~mask)
+		return AARCH64_BREAK_FAULT;
+
 	/*
 	 * Inverse of Replicate(). Try to spot a repeating pattern
 	 * with a pow2 stride.
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/kgdb.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/kgdb.c
index 43119922341f..e4e95821b1f6 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/kgdb.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/kgdb.c
@@ -223,6 +223,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 		 */
 		if (!kernel_active_single_step())
 			kernel_enable_single_step(linux_regs);
+		else
+			kernel_rewind_single_step(linux_regs);
 		err = 0;
 		break;
 	default:
@@ -252,7 +254,7 @@ static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
 	if (!kgdb_single_step)
 		return DBG_HOOK_ERROR;
 
-	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	return DBG_HOOK_HANDLED;
 }
 NOKPROBE_SYMBOL(kgdb_step_brk_fn);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/machine_kexec.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/machine_kexec.c
index 0df8493624e0..cc049ff5c6a5 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/machine_kexec.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/machine_kexec.c
@@ -189,6 +189,7 @@ void machine_kexec(struct kimage *kimage)
 	 * the offline CPUs. Therefore, we must use the __* variant here.
 	 */
 	__flush_icache_range((uintptr_t)reboot_code_buffer,
+			     (uintptr_t)reboot_code_buffer +
 			     arm64_relocate_new_kernel_size);
 
 	/* Flush the kimage list and its buffers. */
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/machine_kexec_file.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/machine_kexec_file.c
index 7b08bf9499b6..d2a62dd17d79 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/machine_kexec_file.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/machine_kexec_file.c
@@ -150,8 +150,10 @@ static int create_dtb(struct kimage *image,
 
 		/* duplicate a device tree blob */
 		ret = fdt_open_into(initial_boot_params, buf, buf_size);
-		if (ret)
+		if (ret) {
+			vfree(buf);
 			return -EINVAL;
+		}
 
 		ret = setup_dtb(image, initrd_load_addr, initrd_len,
 				cmdline, buf);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/module-plts.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/module-plts.c
index b182442b87a3..426018ebb700 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/module-plts.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/module-plts.c
@@ -270,8 +270,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			mod->arch.core.plt_shndx = i;
 		else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt"))
 			mod->arch.init.plt_shndx = i;
-		else if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
-			 !strcmp(secstrings + sechdrs[i].sh_name,
+		else if (!strcmp(secstrings + sechdrs[i].sh_name,
 				 ".text.ftrace_trampoline"))
 			tramp = sechdrs + i;
 		else if (sechdrs[i].sh_type == SHT_SYMTAB)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/module.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/module.c
index 03ff15bffbb6..d0692ecb99bb 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/module.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/module.c
@@ -9,6 +9,7 @@
 
 #include <linux/bitops.h>
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/gfp.h>
 #include <linux/kasan.h>
 #include <linux/kernel.h>
@@ -470,22 +471,48 @@ overflow:
 	return -ENOEXEC;
 }
 
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
+static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
 {
 	const Elf_Shdr *s, *se;
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
 	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
-		if (strcmp(".altinstructions", secstrs + s->sh_name) == 0)
-			apply_alternatives_module((void *)s->sh_addr, s->sh_size);
-#ifdef CONFIG_ARM64_MODULE_PLTS
-		if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
-		    !strcmp(".text.ftrace_trampoline", secstrs + s->sh_name))
-			me->arch.ftrace_trampoline = (void *)s->sh_addr;
-#endif
+		if (strcmp(name, secstrs + s->sh_name) == 0)
+			return s;
 	}
 
+	return NULL;
+}
+
+static int module_init_ftrace_plt(const Elf_Ehdr *hdr,
+				  const Elf_Shdr *sechdrs,
+				  struct module *mod)
+{
+#if defined(CONFIG_ARM64_MODULE_PLTS) && defined(CONFIG_DYNAMIC_FTRACE)
+	const Elf_Shdr *s;
+	struct plt_entry *plt;
+
+	s = find_section(hdr, sechdrs, ".text.ftrace_trampoline");
+	if (!s)
+		return -ENOEXEC;
+
+	plt = (void *)s->sh_addr;
+	*plt = get_plt_entry(FTRACE_ADDR, plt);
+	mod->arch.ftrace_trampoline = plt;
+#endif
 	return 0;
 }
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	const Elf_Shdr *s;
+	s = find_section(hdr, sechdrs, ".altinstructions");
+	if (s)
+		apply_alternatives_module((void *)s->sh_addr, s->sh_size);
+
+	return module_init_ftrace_plt(hdr, sechdrs, me);
+}
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/module.lds linux-libre-5.4.261-gnu1/arch/arm64/kernel/module.lds
index 22e36a21c113..9371abe2f4c2 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/module.lds
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/module.lds
@@ -1,5 +1,5 @@
 SECTIONS {
-	.plt (NOLOAD) : { BYTE(0) }
-	.init.plt (NOLOAD) : { BYTE(0) }
-	.text.ftrace_trampoline (NOLOAD) : { BYTE(0) }
+	.plt 0 : { BYTE(0) }
+	.init.plt 0 : { BYTE(0) }
+	.text.ftrace_trampoline 0 : { BYTE(0) }
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/perf_callchain.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_callchain.c
index b0e03e052dd1..b84ec4ce7d8d 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/perf_callchain.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_callchain.c
@@ -102,7 +102,9 @@ compat_user_backtrace(struct compat_frame_tail __user *tail,
 void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
 			 struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -147,9 +149,10 @@ static int callchain_trace(struct stackframe *frame, void *data)
 void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
 			   struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe frame;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -160,18 +163,21 @@ void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest())
+		return guest_cbs->get_guest_ip();
 
 	return instruction_pointer(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
+	if (guest_cbs && guest_cbs->is_in_guest()) {
+		if (guest_cbs->is_user_mode())
 			misc |= PERF_RECORD_MISC_GUEST_USER;
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/perf_event.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_event.c
index a0b4f1bca491..19128d994ee9 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/perf_event.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_event.c
@@ -155,7 +155,7 @@ armv8pmu_events_sysfs_show(struct device *dev,
 
 	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
 
-	return sprintf(page, "event=0x%03llx\n", pmu_attr->id);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
 }
 
 #define ARMV8_EVENT_ATTR(name, config) \
@@ -303,10 +303,13 @@ armv8pmu_event_attr_is_visible(struct kobject *kobj,
 	    test_bit(pmu_attr->id, cpu_pmu->pmceid_bitmap))
 		return attr->mode;
 
-	pmu_attr->id -= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
-	if (pmu_attr->id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
-	    test_bit(pmu_attr->id, cpu_pmu->pmceid_ext_bitmap))
-		return attr->mode;
+	if (pmu_attr->id >= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE) {
+		u64 id = pmu_attr->id - ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
+
+		if (id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
+		    test_bit(id, cpu_pmu->pmceid_ext_bitmap))
+			return attr->mode;
+	}
 
 	return 0;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/perf_regs.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_regs.c
index 0bbac612146e..666b225aeb3a 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/perf_regs.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/perf_regs.c
@@ -15,15 +15,34 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 		return 0;
 
 	/*
-	 * Compat (i.e. 32 bit) mode:
-	 * - PC has been set in the pt_regs struct in kernel_entry,
-	 * - Handle SP and LR here.
+	 * Our handling of compat tasks (PERF_SAMPLE_REGS_ABI_32) is weird, but
+	 * we're stuck with it for ABI compatability reasons.
+	 *
+	 * For a 32-bit consumer inspecting a 32-bit task, then it will look at
+	 * the first 16 registers (see arch/arm/include/uapi/asm/perf_regs.h).
+	 * These correspond directly to a prefix of the registers saved in our
+	 * 'struct pt_regs', with the exception of the PC, so we copy that down
+	 * (x15 corresponds to SP_hyp in the architecture).
+	 *
+	 * So far, so good.
+	 *
+	 * The oddity arises when a 64-bit consumer looks at a 32-bit task and
+	 * asks for registers beyond PERF_REG_ARM_MAX. In this case, we return
+	 * SP_usr, LR_usr and PC in the positions where the AArch64 SP, LR and
+	 * PC registers would normally live. The initial idea was to allow a
+	 * 64-bit unwinder to unwind a 32-bit task and, although it's not clear
+	 * how well that works in practice, somebody might be relying on it.
+	 *
+	 * At the time we make a sample, we don't know whether the consumer is
+	 * 32-bit or 64-bit, so we have to cater for both possibilities.
 	 */
 	if (compat_user_mode(regs)) {
 		if ((u32)idx == PERF_REG_ARM64_SP)
 			return regs->compat_sp;
 		if ((u32)idx == PERF_REG_ARM64_LR)
 			return regs->compat_lr;
+		if (idx == 15)
+			return regs->pc;
 	}
 
 	if ((u32)idx == PERF_REG_ARM64_SP)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/probes/kprobes.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/probes/kprobes.c
index c4452827419b..b41ed2f907b0 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/probes/kprobes.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/probes/kprobes.c
@@ -36,25 +36,16 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 static void __kprobes
 post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
 
-static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
-{
-	void *addrs[1];
-	u32 insns[1];
-
-	addrs[0] = addr;
-	insns[0] = opcode;
-
-	return aarch64_insn_patch_text(addrs, insns, 1);
-}
-
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
+	kprobe_opcode_t *addr = p->ainsn.api.insn;
+	void *addrs[] = {addr, addr + 1};
+	u32 insns[] = {p->opcode, BRK64_OPCODE_KPROBES_SS};
+
 	/* prepare insn slot */
-	patch_text(p->ainsn.api.insn, p->opcode);
+	aarch64_insn_patch_text(addrs, insns, 2);
 
-	flush_icache_range((uintptr_t) (p->ainsn.api.insn),
-			   (uintptr_t) (p->ainsn.api.insn) +
-			   MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	flush_icache_range((uintptr_t)addr, (uintptr_t)(addr + MAX_INSN_SIZE));
 
 	/*
 	 * Needs restoring of return address after stepping xol.
@@ -134,13 +125,18 @@ void *alloc_insn_page(void)
 /* arm kprobe: install breakpoint in text */
 void __kprobes arch_arm_kprobe(struct kprobe *p)
 {
-	patch_text(p->addr, BRK64_OPCODE_KPROBES);
+	void *addr = p->addr;
+	u32 insn = BRK64_OPCODE_KPROBES;
+
+	aarch64_insn_patch_text(&addr, &insn, 1);
 }
 
 /* disarm kprobe: remove breakpoint from text */
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	patch_text(p->addr, p->opcode);
+	void *addr = p->addr;
+
+	aarch64_insn_patch_text(&addr, &p->opcode, 1);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
@@ -169,20 +165,15 @@ static void __kprobes set_current_kprobe(struct kprobe *p)
 }
 
 /*
- * Interrupts need to be disabled before single-step mode is set, and not
- * reenabled until after single-step mode ends.
- * Without disabling interrupt on local CPU, there is a chance of
- * interrupt occurrence in the period of exception return and  start of
- * out-of-line single-step, that result in wrongly single stepping
- * into the interrupt handler.
+ * Mask all of DAIF while executing the instruction out-of-line, to keep things
+ * simple and avoid nesting exceptions. Interrupts do have to be disabled since
+ * the kprobe state is per-CPU and doesn't get migrated.
  */
 static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
 						struct pt_regs *regs)
 {
 	kcb->saved_irqflag = regs->pstate & DAIF_MASK;
-	regs->pstate |= PSR_I_BIT;
-	/* Unmask PSTATE.D for enabling software step exceptions. */
-	regs->pstate &= ~PSR_D_BIT;
+	regs->pstate |= DAIF_MASK;
 }
 
 static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
@@ -225,10 +216,7 @@ static void __kprobes setup_singlestep(struct kprobe *p,
 		slot = (unsigned long)p->ainsn.api.insn;
 
 		set_ss_context(kcb, slot);	/* mark pending ss */
-
-		/* IRQs and single stepping do not mix well. */
 		kprobes_save_local_irqflag(kcb, regs);
-		kernel_enable_single_step(regs);
 		instruction_pointer_set(regs, slot);
 	} else {
 		/* insn simulation */
@@ -279,12 +267,8 @@ post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
 	}
 	/* call post handler */
 	kcb->kprobe_status = KPROBE_HIT_SSDONE;
-	if (cur->post_handler)	{
-		/* post_handler can hit breakpoint and single step
-		 * again, so we enable D-flag for recursive exception.
-		 */
+	if (cur->post_handler)
 		cur->post_handler(cur, regs, 0);
-	}
 
 	reset_current_kprobe();
 }
@@ -308,8 +292,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 		if (!instruction_pointer(regs))
 			BUG();
 
-		kernel_disable_single_step();
-
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
 		else
@@ -371,10 +353,6 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
 			 * pre-handler and it returned non-zero, it will
 			 * modify the execution path and no need to single
 			 * stepping. Let's just reset current kprobe and exit.
-			 *
-			 * pre_handler can hit a breakpoint and can step thru
-			 * before return, keep PSTATE D-flag enabled until
-			 * pre_handler return back.
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs)) {
 				setup_singlestep(p, regs, kcb, 0);
@@ -405,7 +383,7 @@ kprobe_ss_hit(struct kprobe_ctlblk *kcb, unsigned long addr)
 }
 
 static int __kprobes
-kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
+kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned int esr)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 	int retval;
@@ -415,16 +393,15 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
 
 	if (retval == DBG_HOOK_HANDLED) {
 		kprobes_restore_local_irqflag(kcb, regs);
-		kernel_disable_single_step();
-
 		post_kprobe_handler(kcb, regs);
 	}
 
 	return retval;
 }
 
-static struct step_hook kprobes_step_hook = {
-	.fn = kprobe_single_step_handler,
+static struct break_hook kprobes_break_ss_hook = {
+	.imm = KPROBES_BRK_SS_IMM,
+	.fn = kprobe_breakpoint_ss_handler,
 };
 
 static int __kprobes
@@ -568,7 +545,7 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 int __init arch_init_kprobes(void)
 {
 	register_kernel_break_hook(&kprobes_break_hook);
-	register_kernel_step_hook(&kprobes_step_hook);
+	register_kernel_break_hook(&kprobes_break_ss_hook);
 
 	return 0;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/probes/uprobes.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/probes/uprobes.c
index a412d8edbcd2..2c247634552b 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/probes/uprobes.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/probes/uprobes.c
@@ -38,7 +38,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
 
 	/* TODO: Currently we do not support AARCH32 instruction probing */
 	if (mm->context.flags & MMCF_AARCH32)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	else if (!IS_ALIGNED(addr, AARCH64_INSN_SIZE))
 		return -EINVAL;
 
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/process.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/process.c
index 71f788cd2b18..d07fbc21f14c 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/process.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/process.c
@@ -56,7 +56,7 @@
 
 #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 #include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
+unsigned long __stack_chk_guard __ro_after_init;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
@@ -360,8 +360,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 
 asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
-int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
+		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -394,11 +394,11 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 		}
 
 		/*
-		 * If a TLS pointer was passed to clone (4th argument), use it
-		 * for the new thread.
+		 * If a TLS pointer was passed to clone, use it for the new
+		 * thread.
 		 */
 		if (clone_flags & CLONE_SETTLS)
-			p->thread.uw.tp_value = childregs->regs[3];
+			p->thread.uw.tp_value = tls;
 	} else {
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->pstate = PSR_MODE_EL1h;
@@ -466,6 +466,13 @@ static void ssbs_thread_switch(struct task_struct *next)
 	if (unlikely(next->flags & PF_KTHREAD))
 		return;
 
+	/*
+	 * If all CPUs implement the SSBS extension, then we just need to
+	 * context-switch the PSTATE field.
+	 */
+	if (cpu_have_feature(cpu_feature(SSBS)))
+		return;
+
 	/* If the mitigation is enabled, then we leave SSBS clear. */
 	if ((arm64_get_ssbd_state() == ARM64_SSBD_FORCE_ENABLE) ||
 	    test_tsk_thread_flag(next, TIF_SSBD))
@@ -491,6 +498,30 @@ static void entry_task_switch(struct task_struct *next)
 	__this_cpu_write(__entry_task, next);
 }
 
+/*
+ * ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
+ * Ensure access is disabled when switching to a 32bit task, ensure
+ * access is enabled when switching to a 64bit task.
+ */
+static void erratum_1418040_thread_switch(struct task_struct *next)
+{
+	if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) ||
+	    !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
+		return;
+
+	if (is_compat_thread(task_thread_info(next)))
+		sysreg_clear_set(cntkctl_el1, ARCH_TIMER_USR_VCT_ACCESS_EN, 0);
+	else
+		sysreg_clear_set(cntkctl_el1, 0, ARCH_TIMER_USR_VCT_ACCESS_EN);
+}
+
+static void erratum_1418040_new_exec(void)
+{
+	preempt_disable();
+	erratum_1418040_thread_switch(current);
+	preempt_enable();
+}
+
 /*
  * Thread switching.
  */
@@ -507,6 +538,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
 	uao_thread_switch(next);
 	ptrauth_thread_switch(next);
 	ssbs_thread_switch(next);
+	erratum_1418040_thread_switch(next);
 
 	/*
 	 * Complete any pending TLB or cache maintenance on this CPU in case
@@ -565,6 +597,7 @@ void arch_setup_new_exec(void)
 	current->mm->context.flags = is_compat_task() ? MMCF_AARCH32 : 0;
 
 	ptrauth_thread_init_user(current);
+	erratum_1418040_new_exec();
 }
 
 #ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/psci.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/psci.c
index c9f72b2665f1..62d2bda7adb8 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/psci.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/psci.c
@@ -66,7 +66,6 @@ static int cpu_psci_cpu_disable(unsigned int cpu)
 
 static void cpu_psci_cpu_die(unsigned int cpu)
 {
-	int ret;
 	/*
 	 * There are no known implementations of PSCI actually using the
 	 * power state field, pass a sensible default for now.
@@ -74,14 +73,13 @@ static void cpu_psci_cpu_die(unsigned int cpu)
 	u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
 		    PSCI_0_2_POWER_STATE_TYPE_SHIFT;
 
-	ret = psci_ops.cpu_off(state);
-
-	pr_crit("unable to power off CPU%u (%d)\n", cpu, ret);
+	psci_ops.cpu_off(state);
 }
 
 static int cpu_psci_cpu_kill(unsigned int cpu)
 {
-	int err, i;
+	int err;
+	unsigned long start, end;
 
 	if (!psci_ops.affinity_info)
 		return 0;
@@ -91,16 +89,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu)
 	 * while it is dying. So, try again a few times.
 	 */
 
-	for (i = 0; i < 10; i++) {
+	start = jiffies;
+	end = start + msecs_to_jiffies(100);
+	do {
 		err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
 		if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
-			pr_info("CPU%d killed.\n", cpu);
+			pr_info("CPU%d killed (polled %d ms)\n", cpu,
+				jiffies_to_msecs(jiffies - start));
 			return 0;
 		}
 
-		msleep(10);
-		pr_info("Retrying again to check for CPU kill\n");
-	}
+		usleep_range(100, 1000);
+	} while (time_before(jiffies, end));
 
 	pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
 			cpu, err);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/ptrace.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/ptrace.c
index 21176d02e21a..8a95a013dfd3 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/ptrace.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/ptrace.c
@@ -615,6 +615,13 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 	return 0;
 }
 
+static int fpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!system_supports_fpsimd())
+		return -ENODEV;
+	return regset->n;
+}
+
 /*
  * TODO: update fp accessors for lazy context switching (sync/flush hwstate)
  */
@@ -637,6 +644,9 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   void *kbuf, void __user *ubuf)
 {
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
 	if (target == current)
 		fpsimd_preserve_current_state();
 
@@ -676,6 +686,9 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 {
 	int ret;
 
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
 	ret = __fpr_set(target, regset, pos, count, kbuf, ubuf, 0);
 	if (ret)
 		return ret;
@@ -1134,6 +1147,7 @@ static const struct user_regset aarch64_regsets[] = {
 		 */
 		.size = sizeof(u32),
 		.align = sizeof(u32),
+		.active = fpr_active,
 		.get = fpr_get,
 		.set = fpr_set
 	},
@@ -1348,6 +1362,9 @@ static int compat_vfp_get(struct task_struct *target,
 	compat_ulong_t fpscr;
 	int ret, vregs_end_pos;
 
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
 	uregs = &target->thread.uw.fpsimd_state;
 
 	if (target == current)
@@ -1381,6 +1398,9 @@ static int compat_vfp_set(struct task_struct *target,
 	compat_ulong_t fpscr;
 	int ret, vregs_end_pos;
 
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
 	uregs = &target->thread.uw.fpsimd_state;
 
 	vregs_end_pos = VFP_STATE_SIZE - sizeof(compat_ulong_t);
@@ -1438,6 +1458,7 @@ static const struct user_regset aarch32_regsets[] = {
 		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
 		.size = sizeof(compat_ulong_t),
 		.align = sizeof(compat_ulong_t),
+		.active = fpr_active,
 		.get = compat_vfp_get,
 		.set = compat_vfp_set
 	},
@@ -1798,20 +1819,32 @@ static void tracehook_report_syscall(struct pt_regs *regs,
 	saved_reg = regs->regs[regno];
 	regs->regs[regno] = dir;
 
-	if (dir == PTRACE_SYSCALL_EXIT)
+	if (dir == PTRACE_SYSCALL_ENTER) {
+		if (tracehook_report_syscall_entry(regs))
+			forget_syscall(regs);
+		regs->regs[regno] = saved_reg;
+	} else if (!test_thread_flag(TIF_SINGLESTEP)) {
 		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		forget_syscall(regs);
+		regs->regs[regno] = saved_reg;
+	} else {
+		regs->regs[regno] = saved_reg;
 
-	regs->regs[regno] = saved_reg;
+		/*
+		 * Signal a pseudo-step exception since we are stepping but
+		 * tracer modifications to the registers may have rewound the
+		 * state machine.
+		 */
+		tracehook_report_syscall_exit(regs, 1);
+	}
 }
 
 int syscall_trace_enter(struct pt_regs *regs)
 {
-	if (test_thread_flag(TIF_SYSCALL_TRACE) ||
-		test_thread_flag(TIF_SYSCALL_EMU)) {
+	unsigned long flags = READ_ONCE(current_thread_info()->flags);
+
+	if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) {
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
-		if (!in_syscall(regs) || test_thread_flag(TIF_SYSCALL_EMU))
+		if (flags & _TIF_SYSCALL_EMU)
 			return -1;
 	}
 
@@ -1830,12 +1863,14 @@ int syscall_trace_enter(struct pt_regs *regs)
 
 void syscall_trace_exit(struct pt_regs *regs)
 {
+	unsigned long flags = READ_ONCE(current_thread_info()->flags);
+
 	audit_syscall_exit(regs);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
-		trace_sys_exit(regs, regs_return_value(regs));
+	if (flags & _TIF_SYSCALL_TRACEPOINT)
+		trace_sys_exit(regs, syscall_get_return_value(current, regs));
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
+	if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP))
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
 
 	rseq_syscall(regs);
@@ -1913,8 +1948,8 @@ static int valid_native_regs(struct user_pt_regs *regs)
  */
 int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task)
 {
-	if (!test_tsk_thread_flag(task, TIF_SINGLESTEP))
-		regs->pstate &= ~DBG_SPSR_SS;
+	/* https://lore.kernel.org/lkml/20191118131525.GA4180@willie-the-truck */
+	user_regs_reset_single_step(regs, task);
 
 	if (is_compat_thread(task_thread_info(task)))
 		return valid_compat_regs(regs);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/setup.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/setup.c
index 56f664561754..f55f4a15a905 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/setup.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/setup.c
@@ -85,7 +85,7 @@ u64 __cacheline_aligned boot_args[4];
 void __init smp_setup_processor_id(void)
 {
 	u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
-	cpu_logical_map(0) = mpidr;
+	set_cpu_logical_map(0, mpidr);
 
 	/*
 	 * clear __my_cpu_offset on boot CPU to avoid hang caused by
@@ -276,6 +276,12 @@ arch_initcall(reserve_memblock_reserved_regions);
 
 u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
 
+u64 cpu_logical_map(int cpu)
+{
+	return __cpu_logical_map[cpu];
+}
+EXPORT_SYMBOL_GPL(cpu_logical_map);
+
 void __init setup_arch(char **cmdline_p)
 {
 	init_mm.start_code = (unsigned long) _text;
@@ -350,7 +356,7 @@ void __init setup_arch(char **cmdline_p)
 	 * faults in case uaccess_enable() is inadvertently called by the init
 	 * thread.
 	 */
-	init_task.thread_info.ttbr0 = __pa_symbol(empty_zero_page);
+	init_task.thread_info.ttbr0 = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
 #endif
 
 #ifdef CONFIG_VT
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/signal.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/signal.c
index dd2cdc0d5be2..f6d3278c1a4e 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/signal.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/signal.c
@@ -29,6 +29,7 @@
 #include <asm/unistd.h>
 #include <asm/fpsimd.h>
 #include <asm/ptrace.h>
+#include <asm/syscall.h>
 #include <asm/signal32.h>
 #include <asm/traps.h>
 #include <asm/vdso.h>
@@ -782,7 +783,6 @@ static void setup_restart_syscall(struct pt_regs *regs)
  */
 static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
 	sigset_t *oldset = sigmask_to_save();
 	int usig = ksig->sig;
 	int ret;
@@ -806,14 +806,8 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	 */
 	ret |= !valid_user_regs(&regs->user_regs, current);
 
-	/*
-	 * Fast forward the stepping logic so we step into the signal
-	 * handler.
-	 */
-	if (!ret)
-		user_fastforward_single_step(tsk);
-
-	signal_setup_done(ret, ksig, 0);
+	/* Step into the signal handler if we are stepping */
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
 }
 
 /*
@@ -875,7 +869,7 @@ static void do_signal(struct pt_regs *regs)
 		     retval == -ERESTART_RESTARTBLOCK ||
 		     (retval == -ERESTARTSYS &&
 		      !(ksig.ka.sa.sa_flags & SA_RESTART)))) {
-			regs->regs[0] = -EINTR;
+			syscall_set_return_value(current, regs, -EINTR, 0);
 			regs->pc = continue_addr;
 		}
 
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/smp.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/smp.c
index dc9fe879c279..987220ac4cfe 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/smp.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/smp.c
@@ -215,6 +215,7 @@ asmlinkage notrace void secondary_start_kernel(void)
 	if (system_uses_irq_prio_masking())
 		init_gic_priority_masking();
 
+	rcu_cpu_starting(cpu);
 	preempt_disable();
 	trace_hardirqs_off();
 
@@ -387,6 +388,7 @@ void cpu_die_early(void)
 
 	/* Mark this CPU absent */
 	set_cpu_present(cpu, 0);
+	rcu_report_dead(cpu);
 
 #ifdef CONFIG_HOTPLUG_CPU
 	update_cpu_boot_status(CPU_KILL_ME);
@@ -549,7 +551,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 		return;
 
 	/* map the logical cpu id to cpu MPIDR */
-	cpu_logical_map(cpu_count) = hwid;
+	set_cpu_logical_map(cpu_count, hwid);
 
 	cpu_madt_gicc[cpu_count] = *processor;
 
@@ -663,7 +665,7 @@ static void __init of_parse_and_init_cpus(void)
 			goto next;
 
 		pr_debug("cpu logical map 0x%llx\n", hwid);
-		cpu_logical_map(cpu_count) = hwid;
+		set_cpu_logical_map(cpu_count, hwid);
 
 		early_map_cpu_to_node(cpu_count, of_node_to_nid(dn));
 next:
@@ -704,7 +706,7 @@ void __init smp_init_cpus(void)
 	for (i = 1; i < nr_cpu_ids; i++) {
 		if (cpu_logical_map(i) != INVALID_HWID) {
 			if (smp_cpu_setup(i))
-				cpu_logical_map(i) = INVALID_HWID;
+				set_cpu_logical_map(i, INVALID_HWID);
 		}
 	}
 }
@@ -955,11 +957,22 @@ void tick_broadcast(const struct cpumask *mask)
 }
 #endif
 
+/*
+ * The number of CPUs online, not counting this CPU (which may not be
+ * fully online and so not counted in num_online_cpus()).
+ */
+static inline unsigned int num_other_online_cpus(void)
+{
+	unsigned int this_cpu_online = cpu_online(smp_processor_id());
+
+	return num_online_cpus() - this_cpu_online;
+}
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
 
-	if (num_online_cpus() > 1) {
+	if (num_other_online_cpus()) {
 		cpumask_t mask;
 
 		cpumask_copy(&mask, cpu_online_mask);
@@ -972,10 +985,10 @@ void smp_send_stop(void)
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
-	while (num_online_cpus() > 1 && timeout--)
+	while (num_other_online_cpus() && timeout--)
 		udelay(1);
 
-	if (num_online_cpus() > 1)
+	if (num_other_online_cpus())
 		pr_warning("SMP: failed to stop secondary CPUs %*pbl\n",
 			   cpumask_pr_args(cpu_online_mask));
 
@@ -998,7 +1011,11 @@ void crash_smp_send_stop(void)
 
 	cpus_stopped = 1;
 
-	if (num_online_cpus() == 1) {
+	/*
+	 * If this cpu is the only one alive at this point in time, online or
+	 * not, there are no stop messages to be sent around, so just back out.
+	 */
+	if (num_other_online_cpus() == 0) {
 		sdei_mask_local_cpu();
 		return;
 	}
@@ -1006,7 +1023,7 @@ void crash_smp_send_stop(void)
 	cpumask_copy(&mask, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &mask);
 
-	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+	atomic_set(&waiting_for_crash_ipi, num_other_online_cpus());
 
 	pr_crit("SMP: stopping secondary CPUs\n");
 	smp_cross_call(&mask, IPI_CPU_CRASH_STOP);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/sys_compat.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/sys_compat.c
index f1cb64959427..51274bab2565 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/sys_compat.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/sys_compat.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/compat.h>
+#include <linux/cpufeature.h>
 #include <linux/personality.h>
 #include <linux/sched.h>
 #include <linux/sched/signal.h>
@@ -17,6 +18,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/system_misc.h>
+#include <asm/tlbflush.h>
 #include <asm/unistd.h>
 
 static long
@@ -30,6 +32,15 @@ __do_compat_cache_op(unsigned long start, unsigned long end)
 		if (fatal_signal_pending(current))
 			return 0;
 
+		if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+			/*
+			 * The workaround requires an inner-shareable tlbi.
+			 * We pick the reserved-ASID to minimise the impact.
+			 */
+			__tlbi(aside1is, __TLBI_VADDR(0, 0));
+			dsb(ish);
+		}
+
 		ret = __flush_cache_user_range(start, start + chunk);
 		if (ret)
 			return ret;
@@ -104,6 +115,6 @@ long compat_arm_syscall(struct pt_regs *regs, int scno)
 		(compat_thumb_mode(regs) ? 2 : 4);
 
 	arm64_notify_die("Oops - bad compat syscall(2)", regs,
-			 SIGILL, ILL_ILLTRP, addr, scno);
+			 SIGILL, ILL_ILLTRP, addr, 0);
 	return 0;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/syscall.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/syscall.c
index 871c739f060a..091c11521108 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/syscall.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/syscall.c
@@ -50,7 +50,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 		ret = do_ni_syscall(regs, scno);
 	}
 
-	regs->regs[0] = ret;
+	syscall_set_return_value(current, regs, 0, ret);
 }
 
 static inline bool has_syscall_work(unsigned long flags)
@@ -99,13 +99,13 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
 		if (scno == NO_SYSCALL)
-			regs->regs[0] = -ENOSYS;
+			syscall_set_return_value(current, regs, -ENOSYS, 0);
 		scno = syscall_trace_enter(regs);
 		if (scno == NO_SYSCALL)
 			goto trace_exit;
@@ -121,7 +121,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) {
 		local_daif_mask();
 		flags = current_thread_info()->flags;
-		if (!has_syscall_work(flags)) {
+		if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP)) {
 			/*
 			 * We're off to userspace, where interrupts are
 			 * always enabled after we restore the flags from
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/topology.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/topology.c
index fa9528dfd0ce..3d3a673c6704 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/topology.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/topology.c
@@ -21,44 +21,6 @@
 #include <asm/cputype.h>
 #include <asm/topology.h>
 
-void store_cpu_topology(unsigned int cpuid)
-{
-	struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
-	u64 mpidr;
-
-	if (cpuid_topo->package_id != -1)
-		goto topology_populated;
-
-	mpidr = read_cpuid_mpidr();
-
-	/* Uniprocessor systems can rely on default topology values */
-	if (mpidr & MPIDR_UP_BITMASK)
-		return;
-
-	/* Create cpu topology mapping based on MPIDR. */
-	if (mpidr & MPIDR_MT_BITMASK) {
-		/* Multiprocessor system : Multi-threads per core */
-		cpuid_topo->thread_id  = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 2) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 8;
-	} else {
-		/* Multiprocessor system : Single-thread per core */
-		cpuid_topo->thread_id  = -1;
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 1) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 2) << 8 |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 16;
-	}
-
-	pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
-		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
-		 cpuid_topo->thread_id, mpidr);
-
-topology_populated:
-	update_siblings_masks(cpuid);
-}
-
 #ifdef CONFIG_ACPI
 static bool __init acpi_cpu_is_threaded(int cpu)
 {
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/traps.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/traps.c
index 34739e80211b..a436a6972ced 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/traps.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/traps.c
@@ -202,7 +202,7 @@ void die(const char *str, struct pt_regs *regs, int err)
 	raw_spin_unlock_irqrestore(&die_lock, flags);
 
 	if (ret != NOTIFY_STOP)
-		do_exit(SIGSEGV);
+		make_task_dead(SIGSEGV);
 }
 
 static void arm64_show_signal(int signo, const char *str)
@@ -470,6 +470,15 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
 	int rt = ESR_ELx_SYS64_ISS_RT(esr);
 	unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
 
+	if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+		/* Hide DIC so that we can trap the unnecessary maintenance...*/
+		val &= ~BIT(CTR_DIC_SHIFT);
+
+		/* ... and fake IminLine to reduce the number of traps. */
+		val &= ~CTR_IMINLINE_MASK;
+		val |= (PAGE_SHIFT - 2) & CTR_IMINLINE_MASK;
+	}
+
 	pt_regs_write_reg(regs, rt, val);
 
 	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/vdso.c linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso.c
index 354b11e27c07..033a48f30dbb 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/vdso.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso.c
@@ -260,18 +260,7 @@ static int __aarch32_alloc_vdso_pages(void)
 	if (ret)
 		return ret;
 
-	ret = aarch32_alloc_kuser_vdso_page();
-	if (ret) {
-		unsigned long c_vvar =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
-		unsigned long c_vdso =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
-		free_page(c_vvar);
-		free_page(c_vdso);
-	}
-
-	return ret;
+	return aarch32_alloc_kuser_vdso_page();
 }
 #else
 static int __aarch32_alloc_vdso_pages(void)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/vdso/Makefile linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso/Makefile
index dd2514bb1511..3862cad2410c 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/vdso/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso/Makefile
@@ -32,7 +32,7 @@ UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 KCOV_INSTRUMENT			:= n
 
-CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny
+CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -fasynchronous-unwind-tables
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/vdso/vdso.lds.S linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso/vdso.lds.S
index 7ad2d3a0cd48..815df253f96e 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/vdso/vdso.lds.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso/vdso.lds.S
@@ -28,6 +28,13 @@ SECTIONS
 	.gnu.version_d	: { *(.gnu.version_d) }
 	.gnu.version_r	: { *(.gnu.version_r) }
 
+	/*
+	 * Discard .note.gnu.property sections which are unused and have
+	 * different alignment requirement from vDSO note sections.
+	 */
+	/DISCARD/	: {
+		*(.note.GNU-stack .note.gnu.property)
+	}
 	.note		: { *(.note.*) }		:text	:note
 
 	. = ALIGN(16);
@@ -48,7 +55,6 @@ SECTIONS
 	PROVIDE(end = .);
 
 	/DISCARD/	: {
-		*(.note.GNU-stack)
 		*(.data .data.* .gnu.linkonce.d.* .sdata*)
 		*(.bss .sbss .dynbss .dynsbss)
 	}
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/vdso32/Makefile linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso32/Makefile
index 76b327f88fbb..894791f03596 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/vdso32/Makefile
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/vdso32/Makefile
@@ -32,7 +32,8 @@ cc32-as-instr = $(call try-run,\
 # As a result we set our own flags here.
 
 # KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
-VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc -isystem $(shell $(CC_COMPAT) -print-file-name=include)
+VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc
+VDSO_CPPFLAGS += -isystem $(shell $(CC_COMPAT) -print-file-name=include 2>/dev/null)
 VDSO_CPPFLAGS += $(LINUXINCLUDE)
 
 # Common C and assembly flags
@@ -190,7 +191,7 @@ quiet_cmd_vdsosym = VDSOSYM $@
       cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
 
 # Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
+quiet_cmd_vdso_install = INSTALL32 $@
       cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
 
 vdso.so: $(obj)/vdso.so.dbg
diff --git linux-libre-5.4-gnu1/arch/arm64/kernel/vmlinux.lds.S linux-libre-5.4.261-gnu1/arch/arm64/kernel/vmlinux.lds.S
index aa76f7259668..fbab044b3a39 100644
--- linux-libre-5.4-gnu1/arch/arm64/kernel/vmlinux.lds.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kernel/vmlinux.lds.S
@@ -24,6 +24,13 @@ ENTRY(_text)
 
 jiffies = jiffies_64;
 
+
+#define HYPERVISOR_EXTABLE					\
+	. = ALIGN(SZ_8);					\
+	__start___kvm_ex_table = .;				\
+	*(__kvm_ex_table)					\
+	__stop___kvm_ex_table = .;
+
 #define HYPERVISOR_TEXT					\
 	/*						\
 	 * Align to 4 KB so that			\
@@ -39,6 +46,7 @@ jiffies = jiffies_64;
 	__hyp_idmap_text_end = .;			\
 	__hyp_text_start = .;				\
 	*(.hyp.text)					\
+	HYPERVISOR_EXTABLE				\
 	__hyp_text_end = .;
 
 #define IDMAP_TEXT					\
@@ -142,28 +150,30 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	idmap_pg_dir = .;
 	. += IDMAP_DIR_SIZE;
+	idmap_pg_end = .;
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 	tramp_pg_dir = .;
 	. += PAGE_SIZE;
 #endif
 
-#ifdef CONFIG_ARM64_SW_TTBR0_PAN
-	reserved_ttbr0 = .;
-	. += RESERVED_TTBR0_SIZE;
-#endif
+	reserved_pg_dir = .;
+	. += PAGE_SIZE;
+
 	swapper_pg_dir = .;
 	. += PAGE_SIZE;
-	swapper_pg_end = .;
 
 	. = ALIGN(SEGMENT_ALIGN);
 	__init_begin = .;
 	__inittext_begin = .;
 
 	INIT_TEXT_SECTION(8)
+
+	__exittext_begin = .;
 	.exit.text : {
 		ARM_EXIT_KEEP(EXIT_TEXT)
 	}
+	__exittext_end = .;
 
 	. = ALIGN(4);
 	.altinstructions : {
@@ -171,9 +181,6 @@ SECTIONS
 		*(.altinstructions)
 		__alt_instructions_end = .;
 	}
-	.altinstr_replacement : {
-		*(.altinstr_replacement)
-	}
 
 	. = ALIGN(PAGE_SIZE);
 	__inittext_end = .;
@@ -269,7 +276,7 @@ ASSERT(__hibernate_exit_text_end - (__hibernate_exit_text_start & ~(SZ_4K - 1))
 	<= SZ_4K, "Hibernate exit text too big or misaligned")
 #endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) == PAGE_SIZE,
+ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) <= 3*PAGE_SIZE,
 	"Entry trampoline text too big")
 #endif
 /*
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/debug.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/debug.c
index 43487f035385..2484b2cca74b 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/debug.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/debug.c
@@ -68,6 +68,64 @@ void kvm_arm_init_debug(void)
 	__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
 }
 
+/**
+ * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * This ensures we will trap access to:
+ *  - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
+ *  - Debug ROM Address (MDCR_EL2_TDRA)
+ *  - OS related registers (MDCR_EL2_TDOSA)
+ *  - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
+ *  - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ */
+static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * This also clears MDCR_EL2_E2PB_MASK to disable guest access
+	 * to the profiling buffer.
+	 */
+	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
+				MDCR_EL2_TPMS |
+				MDCR_EL2_TTRF |
+				MDCR_EL2_TPMCR |
+				MDCR_EL2_TDRA |
+				MDCR_EL2_TDOSA);
+
+	/* Is the VM being debugged by userspace? */
+	if (vcpu->guest_debug)
+		/* Route all software debug exceptions to EL2 */
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+
+	/*
+	 * Trap debug register access when one of the following is true:
+	 *  - Userspace is using the hardware to debug the guest
+	 *  (KVM_GUESTDBG_USE_HW is set).
+	 *  - The guest is not using debug (KVM_ARM64_DEBUG_DIRTY is clear).
+	 */
+	if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
+	    !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
+
+	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
+}
+
+/**
+ * kvm_arm_vcpu_init_debug - setup vcpu debug traps
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * Set vcpu initial mdcr_el2 value.
+ */
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
+{
+	preempt_disable();
+	kvm_arm_setup_mdcr_el2(vcpu);
+	preempt_enable();
+}
+
 /**
  * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
  */
@@ -83,12 +141,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
  * @vcpu:	the vcpu pointer
  *
  * This is called before each entry into the hypervisor to setup any
- * debug related registers. Currently this just ensures we will trap
- * access to:
- *  - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
- *  - Debug ROM Address (MDCR_EL2_TDRA)
- *  - OS related registers (MDCR_EL2_TDOSA)
- *  - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
+ * debug related registers.
  *
  * Additionally, KVM only traps guest accesses to the debug registers if
  * the guest is not actively using them (see the KVM_ARM64_DEBUG_DIRTY
@@ -100,27 +153,14 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
 
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 {
-	bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
-	unsigned long mdscr;
+	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
 
 	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
 
-	/*
-	 * This also clears MDCR_EL2_E2PB_MASK to disable guest access
-	 * to the profiling buffer.
-	 */
-	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
-	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
-				MDCR_EL2_TPMS |
-				MDCR_EL2_TPMCR |
-				MDCR_EL2_TDRA |
-				MDCR_EL2_TDOSA);
+	kvm_arm_setup_mdcr_el2(vcpu);
 
 	/* Is Guest debugging in effect? */
 	if (vcpu->guest_debug) {
-		/* Route all software debug exceptions to EL2 */
-		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
-
 		/* Save guest debug state */
 		save_guest_debug_regs(vcpu);
 
@@ -174,7 +214,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 
 			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
 			vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
-			trap_debug = true;
 
 			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
 						&vcpu->arch.debug_ptr->dbg_bcr[0],
@@ -189,15 +228,14 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	BUG_ON(!vcpu->guest_debug &&
 		vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
 
-	/* Trap debug register access */
-	if (trap_debug)
-		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
-
 	/* If KDE or MDE are set, perform a full save/restore cycle. */
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
 
-	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
+	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
+	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
 	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }
 
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/guest.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/guest.c
index dfd626447482..5271ab366bee 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/guest.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/guest.c
@@ -202,6 +202,13 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	}
 
 	memcpy((u32 *)regs + off, valp, KVM_REG_SIZE(reg->id));
+
+	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
+		int i;
+
+		for (i = 0; i < 16; i++)
+			*vcpu_reg32(vcpu, i) = (u32)*vcpu_reg32(vcpu, i);
+	}
 out:
 	return err;
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/handle_exit.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/handle_exit.c
index 706cca23f0d2..1249f68a9418 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/handle_exit.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/handle_exit.c
@@ -162,31 +162,16 @@ static int handle_sve(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
-#define __ptrauth_save_key(regs, key)						\
-({										\
-	regs[key ## KEYLO_EL1] = read_sysreg_s(SYS_ ## key ## KEYLO_EL1);	\
-	regs[key ## KEYHI_EL1] = read_sysreg_s(SYS_ ## key ## KEYHI_EL1);	\
-})
-
 /*
  * Handle the guest trying to use a ptrauth instruction, or trying to access a
  * ptrauth register.
  */
 void kvm_arm_vcpu_ptrauth_trap(struct kvm_vcpu *vcpu)
 {
-	struct kvm_cpu_context *ctxt;
-
-	if (vcpu_has_ptrauth(vcpu)) {
+	if (vcpu_has_ptrauth(vcpu))
 		vcpu_ptrauth_enable(vcpu);
-		ctxt = vcpu->arch.host_cpu_context;
-		__ptrauth_save_key(ctxt->sys_regs, APIA);
-		__ptrauth_save_key(ctxt->sys_regs, APIB);
-		__ptrauth_save_key(ctxt->sys_regs, APDA);
-		__ptrauth_save_key(ctxt->sys_regs, APDB);
-		__ptrauth_save_key(ctxt->sys_regs, APGA);
-	} else {
+	else
 		kvm_inject_undefined(vcpu);
-	}
 }
 
 /*
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp-init.S linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp-init.S
index 160be2b4696d..dc41b505507d 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp-init.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp-init.S
@@ -136,11 +136,15 @@ ENTRY(__kvm_handle_stub_hvc)
 
 1:	cmp	x0, #HVC_RESET_VECTORS
 	b.ne	1f
-reset:
+
 	/*
-	 * Reset kvm back to the hyp stub. Do not clobber x0-x4 in
-	 * case we coming via HVC_SOFT_RESTART.
+	 * Set the HVC_RESET_VECTORS return code before entering the common
+	 * path so that we do not clobber x0-x2 in case we are coming via
+	 * HVC_SOFT_RESTART.
 	 */
+	mov	x0, xzr
+reset:
+	/* Reset kvm back to the hyp stub. */
 	mrs	x5, sctlr_el2
 	ldr	x6, =SCTLR_ELx_FLAGS
 	bic	x5, x5, x6		// Clear SCTL_M and etc
@@ -151,7 +155,6 @@ reset:
 	/* Install stub vectors */
 	adr_l	x5, __hyp_stub_vectors
 	msr	vbar_el2, x5
-	mov	x0, xzr
 	eret
 
 1:	/* Bad stub call */
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/debug-sr.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/debug-sr.c
index 0fc9872a1467..aead8a5fbe91 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/debug-sr.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/debug-sr.c
@@ -168,6 +168,21 @@ static void __hyp_text __debug_restore_state(struct kvm_vcpu *vcpu,
 	write_sysreg(ctxt->sys_regs[MDCCINT_EL1], mdccint_el1);
 }
 
+void __hyp_text __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Non-VHE: Disable and flush SPE data generation
+	 * VHE: The vcpu can run, but it can't hide.
+	 */
+	__debug_save_spe_nvhe(&vcpu->arch.host_debug_state.pmscr_el1);
+
+}
+
+void __hyp_text __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu)
+{
+	__debug_restore_spe_nvhe(vcpu->arch.host_debug_state.pmscr_el1);
+}
+
 void __hyp_text __debug_switch_to_guest(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *host_ctxt;
@@ -175,13 +190,6 @@ void __hyp_text __debug_switch_to_guest(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	/*
-	 * Non-VHE: Disable and flush SPE data generation
-	 * VHE: The vcpu can run, but it can't hide.
-	 */
-	if (!has_vhe())
-		__debug_save_spe_nvhe(&vcpu->arch.host_debug_state.pmscr_el1);
-
 	if (!(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
 		return;
 
@@ -201,8 +209,6 @@ void __hyp_text __debug_switch_to_host(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	if (!has_vhe())
-		__debug_restore_spe_nvhe(vcpu->arch.host_debug_state.pmscr_el1);
 
 	if (!(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
 		return;
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/entry.S linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/entry.S
index e5cc8d66bf53..dc3d7bc2292f 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/entry.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/entry.S
@@ -173,20 +173,23 @@ alternative_endif
 	// This is our single instruction exception window. A pending
 	// SError is guaranteed to occur at the earliest when we unmask
 	// it, and at the latest just after the ISB.
-	.global	abort_guest_exit_start
 abort_guest_exit_start:
 
 	isb
 
-	.global	abort_guest_exit_end
 abort_guest_exit_end:
 
 	msr	daifset, #4	// Mask aborts
+	ret
+
+	_kvm_extable	abort_guest_exit_start, 9997f
+	_kvm_extable	abort_guest_exit_end, 9997f
+9997:
+	msr	daifset, #4	// Mask aborts
+	mov	x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
 
-	// If the exception took place, restore the EL1 exception
-	// context so that we can report some information.
-	// Merge the exception code with the SError pending bit.
-	tbz	x0, #ARM_EXIT_WITH_SERROR_BIT, 1f
+	// restore the EL1 exception context so that we can report some
+	// information. Merge the exception code with the SError pending bit.
 	msr	elr_el2, x2
 	msr	esr_el2, x3
 	msr	spsr_el2, x4
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/hyp-entry.S linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/hyp-entry.S
index ffa68d5713f1..99b8ecaae810 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/hyp-entry.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/hyp-entry.S
@@ -15,6 +15,30 @@
 #include <asm/kvm_mmu.h>
 #include <asm/mmu.h>
 
+.macro save_caller_saved_regs_vect
+	/* x0 and x1 were saved in the vector entry */
+	stp	x2, x3,   [sp, #-16]!
+	stp	x4, x5,   [sp, #-16]!
+	stp	x6, x7,   [sp, #-16]!
+	stp	x8, x9,   [sp, #-16]!
+	stp	x10, x11, [sp, #-16]!
+	stp	x12, x13, [sp, #-16]!
+	stp	x14, x15, [sp, #-16]!
+	stp	x16, x17, [sp, #-16]!
+.endm
+
+.macro restore_caller_saved_regs_vect
+	ldp	x16, x17, [sp], #16
+	ldp	x14, x15, [sp], #16
+	ldp	x12, x13, [sp], #16
+	ldp	x10, x11, [sp], #16
+	ldp	x8, x9,   [sp], #16
+	ldp	x6, x7,   [sp], #16
+	ldp	x4, x5,   [sp], #16
+	ldp	x2, x3,   [sp], #16
+	ldp	x0, x1,   [sp], #16
+.endm
+
 	.text
 	.pushsection	.hyp.text, "ax"
 
@@ -89,6 +113,10 @@ el1_hvc_guest:
 	/* ARM_SMCCC_ARCH_WORKAROUND_2 handling */
 	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_1 ^ \
 			  ARM_SMCCC_ARCH_WORKAROUND_2)
+	cbz	w1, wa_epilogue
+
+	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_2 ^ \
+			  ARM_SMCCC_ARCH_WORKAROUND_3)
 	cbnz	w1, el1_trap
 
 #ifdef CONFIG_ARM64_SSBD
@@ -142,13 +170,19 @@ el1_error:
 	b	__guest_exit
 
 el2_sync:
-	/* Check for illegal exception return, otherwise panic */
+	/* Check for illegal exception return */
 	mrs	x0, spsr_el2
+	tbnz	x0, #20, 1f
 
-	/* if this was something else, then panic! */
-	tst	x0, #PSR_IL_BIT
-	b.eq	__hyp_panic
+	save_caller_saved_regs_vect
+	stp     x29, x30, [sp, #-16]!
+	bl	kvm_unexpected_el2_exception
+	ldp     x29, x30, [sp], #16
+	restore_caller_saved_regs_vect
+
+	eret
 
+1:
 	/* Let's attempt a recovery from the illegal exception return */
 	get_vcpu_ptr	x1, x0
 	mov	x0, #ARM_EXCEPTION_IL
@@ -156,27 +190,14 @@ el2_sync:
 
 
 el2_error:
-	ldp	x0, x1, [sp], #16
+	save_caller_saved_regs_vect
+	stp     x29, x30, [sp, #-16]!
+
+	bl	kvm_unexpected_el2_exception
+
+	ldp     x29, x30, [sp], #16
+	restore_caller_saved_regs_vect
 
-	/*
-	 * Only two possibilities:
-	 * 1) Either we come from the exit path, having just unmasked
-	 *    PSTATE.A: change the return code to an EL2 fault, and
-	 *    carry on, as we're already in a sane state to handle it.
-	 * 2) Or we come from anywhere else, and that's a bug: we panic.
-	 *
-	 * For (1), x0 contains the original return code and x1 doesn't
-	 * contain anything meaningful at that stage. We can reuse them
-	 * as temp registers.
-	 * For (2), who cares?
-	 */
-	mrs	x0, elr_el2
-	adr	x1, abort_guest_exit_start
-	cmp	x0, x1
-	adr	x1, abort_guest_exit_end
-	ccmp	x0, x1, #4, ne
-	b.ne	__hyp_panic
-	mov	x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
 	eret
 	sb
 
@@ -330,4 +351,64 @@ ENTRY(__smccc_workaround_1_smc_start)
 	ldp	x0, x1, [sp, #(8 * 2)]
 	add	sp, sp, #(8 * 4)
 ENTRY(__smccc_workaround_1_smc_end)
+
+ENTRY(__smccc_workaround_3_smc_start)
+	esb
+	sub	sp, sp, #(8 * 4)
+	stp	x2, x3, [sp, #(8 * 0)]
+	stp	x0, x1, [sp, #(8 * 2)]
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+	smc	#0
+	ldp	x2, x3, [sp, #(8 * 0)]
+	ldp	x0, x1, [sp, #(8 * 2)]
+	add	sp, sp, #(8 * 4)
+ENTRY(__smccc_workaround_3_smc_end)
+
+ENTRY(__spectre_bhb_loop_k8_start)
+	esb
+	sub	sp, sp, #(8 * 2)
+	stp	x0, x1, [sp, #(8 * 0)]
+	mov	x0, #8
+2:	b	. + 4
+	subs	x0, x0, #1
+	b.ne	2b
+	dsb	nsh
+	isb
+	ldp	x0, x1, [sp, #(8 * 0)]
+	add	sp, sp, #(8 * 2)
+ENTRY(__spectre_bhb_loop_k8_end)
+
+ENTRY(__spectre_bhb_loop_k24_start)
+	esb
+	sub	sp, sp, #(8 * 2)
+	stp	x0, x1, [sp, #(8 * 0)]
+	mov	x0, #24
+2:	b	. + 4
+	subs	x0, x0, #1
+	b.ne	2b
+	dsb	nsh
+	isb
+	ldp	x0, x1, [sp, #(8 * 0)]
+	add	sp, sp, #(8 * 2)
+ENTRY(__spectre_bhb_loop_k24_end)
+
+ENTRY(__spectre_bhb_loop_k32_start)
+	esb
+	sub	sp, sp, #(8 * 2)
+	stp	x0, x1, [sp, #(8 * 0)]
+	mov     x0, #32
+2:	b	. + 4
+	subs	x0, x0, #1
+	b.ne	2b
+	dsb	nsh
+	isb
+	ldp	x0, x1, [sp, #(8 * 0)]
+	add	sp, sp, #(8 * 2)
+ENTRY(__spectre_bhb_loop_k32_end)
+
+ENTRY(__spectre_bhb_clearbhb_start)
+	esb
+	clearbhb
+	isb
+ENTRY(__spectre_bhb_clearbhb_end)
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/switch.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/switch.c
index 799e84a40335..768983bd2326 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/switch.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/switch.c
@@ -14,6 +14,7 @@
 
 #include <asm/arch_gicv3.h>
 #include <asm/cpufeature.h>
+#include <asm/extable.h>
 #include <asm/kprobes.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
@@ -24,11 +25,23 @@
 #include <asm/debug-monitors.h>
 #include <asm/processor.h>
 #include <asm/thread_info.h>
+#include <asm/vectors.h>
+
+extern struct exception_table_entry __start___kvm_ex_table;
+extern struct exception_table_entry __stop___kvm_ex_table;
 
 /* Check whether the FP regs were dirtied while in the host-side run loop: */
 static bool __hyp_text update_fp_enabled(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->arch.host_thread_info->flags & _TIF_FOREIGN_FPSTATE)
+	/*
+	 * When the system doesn't support FP/SIMD, we cannot rely on
+	 * the _TIF_FOREIGN_FPSTATE flag. However, we always inject an
+	 * abort on the very first access to FP and thus we should never
+	 * see KVM_ARM64_FP_ENABLED. For added safety, make sure we always
+	 * trap the accesses.
+	 */
+	if (!system_supports_fpsimd() ||
+	    vcpu->arch.host_thread_info->flags & _TIF_FOREIGN_FPSTATE)
 		vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED |
 				      KVM_ARM64_FP_HOST);
 
@@ -140,7 +153,7 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 
 static void deactivate_traps_vhe(void)
 {
-	extern char vectors[];	/* kernel exception vectors */
+	const char *host_vectors = vectors;
 	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
 
 	/*
@@ -151,7 +164,10 @@ static void deactivate_traps_vhe(void)
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_1165522));
 
 	write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
-	write_sysreg(vectors, vbar_el1);
+
+	if (!arm64_kernel_unmapped_at_el0())
+		host_vectors = __this_cpu_read(this_cpu_vector);
+	write_sysreg(host_vectors, vbar_el1);
 }
 NOKPROBE_SYMBOL(deactivate_traps_vhe);
 
@@ -249,10 +265,10 @@ static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar)
 	 * saved the guest context yet, and we may return early...
 	 */
 	par = read_sysreg(par_el1);
-	asm volatile("at s1e1r, %0" : : "r" (far));
-	isb();
-
-	tmp = read_sysreg(par_el1);
+	if (!__kvm_at("s1e1r", far))
+		tmp = read_sysreg(par_el1);
+	else
+		tmp = SYS_PAR_EL1_F; /* back to the guest */
 	write_sysreg(par, par_el1);
 
 	if (unlikely(tmp & SYS_PAR_EL1_F))
@@ -484,7 +500,7 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 			kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT &&
 			kvm_vcpu_dabt_isvalid(vcpu) &&
 			!kvm_vcpu_dabt_isextabt(vcpu) &&
-			!kvm_vcpu_dabt_iss1tw(vcpu);
+			!kvm_vcpu_abt_iss1tw(vcpu);
 
 		if (valid) {
 			int ret = __vgic_v2_perform_cpuif_access(vcpu);
@@ -670,6 +686,15 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
 
 	__sysreg_save_state_nvhe(host_ctxt);
 
+	/*
+	 * We must flush and disable the SPE buffer for nVHE, as
+	 * the translation regime(EL1&0) is going to be loaded with
+	 * that of the guest. And we must do this before we change the
+	 * translation regime to EL2 (via MDCR_EL2_EPB == 0) and
+	 * before we load guest Stage1.
+	 */
+	__debug_save_host_buffers_nvhe(vcpu);
+
 	__activate_vm(kern_hyp_va(vcpu->kvm));
 	__activate_traps(vcpu);
 
@@ -708,11 +733,13 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED)
 		__fpsimd_save_fpexc32(vcpu);
 
+	__debug_switch_to_host(vcpu);
+
 	/*
 	 * This must come after restoring the host sysregs, since a non-VHE
 	 * system may enable SPE here and make use of the TTBRs.
 	 */
-	__debug_switch_to_host(vcpu);
+	__debug_restore_host_buffers_nvhe(vcpu);
 
 	if (pmu_switch_needed)
 		__pmu_switch_to_host(host_ctxt);
@@ -746,7 +773,7 @@ static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par,
 	 * making sure it is a kernel address and not a PC-relative
 	 * reference.
 	 */
-	asm volatile("ldr %0, =__hyp_panic_string" : "=r" (str_va));
+	asm volatile("ldr %0, =%1" : "=r" (str_va) : "S" (__hyp_panic_string));
 
 	__hyp_do_panic(str_va,
 		       spsr, elr,
@@ -783,3 +810,30 @@ void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
 
 	unreachable();
 }
+
+asmlinkage void __hyp_text kvm_unexpected_el2_exception(void)
+{
+	unsigned long addr, fixup;
+	struct kvm_cpu_context *host_ctxt;
+	struct exception_table_entry *entry, *end;
+	unsigned long elr_el2 = read_sysreg(elr_el2);
+
+	entry = hyp_symbol_addr(__start___kvm_ex_table);
+	end = hyp_symbol_addr(__stop___kvm_ex_table);
+	host_ctxt = &__hyp_this_cpu_ptr(kvm_host_data)->host_ctxt;
+
+	while (entry < end) {
+		addr = (unsigned long)&entry->insn + entry->insn;
+		fixup = (unsigned long)&entry->fixup + entry->fixup;
+
+		if (addr != elr_el2) {
+			entry++;
+			continue;
+		}
+
+		write_sysreg(fixup, elr_el2);
+		return;
+	}
+
+	hyp_panic(host_ctxt);
+}
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/tlb.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/tlb.c
index eb0efc5557f3..7b7213fc17d9 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/hyp/tlb.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/hyp/tlb.c
@@ -182,7 +182,7 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
 	__tlb_switch_to_host(kvm, &cxt);
 }
 
-void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
+void __hyp_text __kvm_flush_cpu_context(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
 	struct tlb_inv_context cxt;
@@ -191,6 +191,7 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
 	__tlb_switch_to_guest(kvm, &cxt);
 
 	__tlbi(vmalle1);
+	asm volatile("ic iallu");
 	dsb(nsh);
 	isb();
 
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/inject_fault.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/inject_fault.c
index a9d25a305af5..a364a4ad5479 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/inject_fault.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/inject_fault.c
@@ -14,9 +14,6 @@
 #include <asm/kvm_emulate.h>
 #include <asm/esr.h>
 
-#define PSTATE_FAULT_BITS_64 	(PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
-				 PSR_I_BIT | PSR_D_BIT)
-
 #define CURRENT_EL_SP_EL0_VECTOR	0x0
 #define CURRENT_EL_SP_ELx_VECTOR	0x200
 #define LOWER_EL_AArch64_VECTOR		0x400
@@ -50,6 +47,69 @@ static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
 	return vcpu_read_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
 }
 
+/*
+ * When an exception is taken, most PSTATE fields are left unchanged in the
+ * handler. However, some are explicitly overridden (e.g. M[4:0]). Luckily all
+ * of the inherited bits have the same position in the AArch64/AArch32 SPSR_ELx
+ * layouts, so we don't need to shuffle these for exceptions from AArch32 EL0.
+ *
+ * For the SPSR_ELx layout for AArch64, see ARM DDI 0487E.a page C5-429.
+ * For the SPSR_ELx layout for AArch32, see ARM DDI 0487E.a page C5-426.
+ *
+ * Here we manipulate the fields in order of the AArch64 SPSR_ELx layout, from
+ * MSB to LSB.
+ */
+static unsigned long get_except64_pstate(struct kvm_vcpu *vcpu)
+{
+	unsigned long sctlr = vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+	unsigned long old, new;
+
+	old = *vcpu_cpsr(vcpu);
+	new = 0;
+
+	new |= (old & PSR_N_BIT);
+	new |= (old & PSR_Z_BIT);
+	new |= (old & PSR_C_BIT);
+	new |= (old & PSR_V_BIT);
+
+	// TODO: TCO (if/when ARMv8.5-MemTag is exposed to guests)
+
+	new |= (old & PSR_DIT_BIT);
+
+	// PSTATE.UAO is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D5-2579.
+
+	// PSTATE.PAN is unchanged unless SCTLR_ELx.SPAN == 0b0
+	// SCTLR_ELx.SPAN is RES1 when ARMv8.1-PAN is not implemented
+	// See ARM DDI 0487E.a, page D5-2578.
+	new |= (old & PSR_PAN_BIT);
+	if (!(sctlr & SCTLR_EL1_SPAN))
+		new |= PSR_PAN_BIT;
+
+	// PSTATE.SS is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D2-2452.
+
+	// PSTATE.IL is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D1-2306.
+
+	// PSTATE.SSBS is set to SCTLR_ELx.DSSBS upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D13-3258
+	if (sctlr & SCTLR_ELx_DSSBS)
+		new |= PSR_SSBS_BIT;
+
+	// PSTATE.BTYPE is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, pages D1-2293 to D1-2294.
+
+	new |= PSR_D_BIT;
+	new |= PSR_A_BIT;
+	new |= PSR_I_BIT;
+	new |= PSR_F_BIT;
+
+	new |= PSR_MODE_EL1h;
+
+	return new;
+}
+
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
@@ -59,7 +119,7 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu));
 	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 
-	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
+	*vcpu_cpsr(vcpu) = get_except64_pstate(vcpu);
 	vcpu_write_spsr(vcpu, cpsr);
 
 	vcpu_write_sys_reg(vcpu, addr, FAR_EL1);
@@ -94,7 +154,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu));
 	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 
-	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
+	*vcpu_cpsr(vcpu) = get_except64_pstate(vcpu);
 	vcpu_write_spsr(vcpu, cpsr);
 
 	/*
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/reset.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/reset.c
index f4a8ae918827..a3105ae464be 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/reset.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/reset.c
@@ -258,7 +258,7 @@ static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
 	const struct kvm_regs *cpu_reset;
-	int ret = -EINVAL;
+	int ret;
 	bool loaded;
 
 	/* Reset PMU outside of the non-preemptible section */
@@ -281,15 +281,19 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 
 	if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
 	    test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) {
-		if (kvm_vcpu_enable_ptrauth(vcpu))
+		if (kvm_vcpu_enable_ptrauth(vcpu)) {
+			ret = -EINVAL;
 			goto out;
+		}
 	}
 
 	switch (vcpu->arch.target) {
 	default:
 		if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) {
-			if (!cpu_has_32bit_el1())
+			if (!cpu_has_32bit_el1()) {
+				ret = -EINVAL;
 				goto out;
+			}
 			cpu_reset = &default_regs_reset32;
 		} else {
 			cpu_reset = &default_regs_reset;
@@ -374,10 +378,10 @@ void kvm_set_ipa_limit(void)
 		pr_info("kvm: Limiting the IPA size due to kernel %s Address limit\n",
 			(va_max < pa_max) ? "Virtual" : "Physical");
 
-	WARN(ipa_max < KVM_PHYS_SHIFT,
-	     "KVM IPA limit (%d bit) is smaller than default size\n", ipa_max);
 	kvm_ipa_limit = ipa_max;
-	kvm_info("IPA Size Limit: %dbits\n", kvm_ipa_limit);
+	kvm_info("IPA Size Limit: %d bits%s\n", kvm_ipa_limit,
+		 ((kvm_ipa_limit < KVM_PHYS_SHIFT) ?
+		  " (Reduced IPA size, limited VM/VMM compatibility)" : ""));
 }
 
 /*
@@ -404,6 +408,11 @@ int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type)
 			return -EINVAL;
 	} else {
 		phys_shift = KVM_PHYS_SHIFT;
+		if (phys_shift > kvm_ipa_limit) {
+			pr_warn_once("%s using unsupported default IPA limit, upgrade your VMM\n",
+				     current->comm);
+			return -EINVAL;
+		}
 	}
 
 	parange = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1) & 7;
diff --git linux-libre-5.4-gnu1/arch/arm64/kvm/sys_regs.c linux-libre-5.4.261-gnu1/arch/arm64/kvm/sys_regs.c
index 46822afc57e0..a25f737dfa0b 100644
--- linux-libre-5.4-gnu1/arch/arm64/kvm/sys_regs.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/kvm/sys_regs.c
@@ -432,14 +432,14 @@ static bool trap_bvr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -447,7 +447,7 @@ static bool trap_bvr(struct kvm_vcpu *vcpu,
 static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -457,7 +457,7 @@ static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -467,21 +467,21 @@ static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static void reset_bvr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = rd->val;
 }
 
 static bool trap_bcr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -489,7 +489,7 @@ static bool trap_bcr(struct kvm_vcpu *vcpu,
 static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -500,7 +500,7 @@ static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -510,22 +510,22 @@ static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static void reset_bcr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = rd->val;
 }
 
 static bool trap_wvr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write,
-		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg]);
+	trace_trap_reg(__func__, rd->CRm, p->is_write,
+		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm]);
 
 	return true;
 }
@@ -533,7 +533,7 @@ static bool trap_wvr(struct kvm_vcpu *vcpu,
 static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -543,7 +543,7 @@ static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -553,21 +553,21 @@ static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static void reset_wvr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = rd->val;
 }
 
 static bool trap_wcr(struct kvm_vcpu *vcpu,
 		     struct sys_reg_params *p,
 		     const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (p->is_write)
 		reg_to_dbg(vcpu, p, dbg_reg);
 	else
 		dbg_to_reg(vcpu, p, dbg_reg);
 
-	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
 
 	return true;
 }
@@ -575,7 +575,7 @@ static bool trap_wcr(struct kvm_vcpu *vcpu,
 static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (copy_from_user(r, uaddr, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -585,7 +585,7 @@ static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	const struct kvm_one_reg *reg, void __user *uaddr)
 {
-	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
+	__u64 *r = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
 
 	if (copy_to_user(uaddr, r, KVM_REG_SIZE(reg->id)) != 0)
 		return -EFAULT;
@@ -595,7 +595,7 @@ static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 static void reset_wcr(struct kvm_vcpu *vcpu,
 		      const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg] = rd->val;
+	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = rd->val;
 }
 
 static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
@@ -625,6 +625,10 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 pmcr, val;
 
+	/* No PMU available, PMCR_EL0 may UNDEF... */
+	if (!kvm_arm_support_pmu_v3())
+		return;
+
 	pmcr = read_sysreg(pmcr_el0);
 	/*
 	 * Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN
@@ -1132,16 +1136,6 @@ static unsigned int sve_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN_USER | REG_HIDDEN_GUEST;
 }
 
-/* Visibility overrides for SVE-specific ID registers */
-static unsigned int sve_id_visibility(const struct kvm_vcpu *vcpu,
-				      const struct sys_reg_desc *rd)
-{
-	if (vcpu_has_sve(vcpu))
-		return 0;
-
-	return REG_HIDDEN_USER;
-}
-
 /* Generate the emulated ID_AA64ZFR0_EL1 value exposed to the guest */
 static u64 guest_id_aa64zfr0_el1(const struct kvm_vcpu *vcpu)
 {
@@ -1168,9 +1162,6 @@ static int get_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
 {
 	u64 val;
 
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
-
 	val = guest_id_aa64zfr0_el1(vcpu);
 	return reg_to_user(uaddr, &val, reg->id);
 }
@@ -1183,9 +1174,6 @@ static int set_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
 	int err;
 	u64 val;
 
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
-
 	err = reg_from_user(&val, uaddr, id);
 	if (err)
 		return err;
@@ -1280,10 +1268,16 @@ static bool access_clidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 static bool access_csselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			  const struct sys_reg_desc *r)
 {
+	int reg = r->reg;
+
+	/* See the 32bit mapping in kvm_host.h */
+	if (p->is_aarch32)
+		reg = r->reg / 2;
+
 	if (p->is_write)
-		vcpu_write_sys_reg(vcpu, p->regval, r->reg);
+		vcpu_write_sys_reg(vcpu, p->regval, reg);
 	else
-		p->regval = vcpu_read_sys_reg(vcpu, r->reg);
+		p->regval = vcpu_read_sys_reg(vcpu, reg);
 	return true;
 }
 
@@ -1442,7 +1436,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_SANITISED(ID_AA64PFR1_EL1),
 	ID_UNALLOCATED(4,2),
 	ID_UNALLOCATED(4,3),
-	{ SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, .visibility = sve_id_visibility },
+	{ SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, },
 	ID_UNALLOCATED(4,5),
 	ID_UNALLOCATED(4,6),
 	ID_UNALLOCATED(4,7),
@@ -1460,7 +1454,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	/* CRm=6 */
 	ID_SANITISED(ID_AA64ISAR0_EL1),
 	ID_SANITISED(ID_AA64ISAR1_EL1),
-	ID_UNALLOCATED(6,2),
+	ID_SANITISED(ID_AA64ISAR2_EL1),
 	ID_UNALLOCATED(6,3),
 	ID_UNALLOCATED(6,4),
 	ID_UNALLOCATED(6,5),
@@ -1740,9 +1734,9 @@ static const struct sys_reg_desc cp14_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
 	DBG_BCR_BVR_WCR_WVR(1),
 	/* DBGDCCINT */
-	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32, NULL, cp14_DBGDCCINT },
 	/* DBGDSCRext */
-	{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32, NULL, cp14_DBGDSCRext },
 	DBG_BCR_BVR_WCR_WVR(2),
 	/* DBGDTR[RT]Xint */
 	{ Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
@@ -1757,7 +1751,7 @@ static const struct sys_reg_desc cp14_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
 	DBG_BCR_BVR_WCR_WVR(6),
 	/* DBGVCR */
-	{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32, NULL, cp14_DBGVCR },
 	DBG_BCR_BVR_WCR_WVR(7),
 	DBG_BCR_BVR_WCR_WVR(8),
 	DBG_BCR_BVR_WCR_WVR(9),
@@ -1847,6 +1841,7 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
+	{ Op1( 0), CRn( 2), CRm( 0), Op2( 3), access_vm_reg, NULL, c2_TTBCR2 },
 	{ Op1( 0), CRn( 3), CRm( 0), Op2( 0), access_vm_reg, NULL, c3_DACR },
 	{ Op1( 0), CRn( 5), CRm( 0), Op2( 0), access_vm_reg, NULL, c5_DFSR },
 	{ Op1( 0), CRn( 5), CRm( 0), Op2( 1), access_vm_reg, NULL, c5_IFSR },
@@ -2360,8 +2355,11 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
 	if ((id & KVM_REG_ARM_COPROC_MASK) != KVM_REG_ARM64_SYSREG)
 		return NULL;
 
+	if (!index_to_params(id, &params))
+		return NULL;
+
 	table = get_target_table(vcpu->arch.target, true, &num);
-	r = find_reg_by_id(id, &params, table, num);
+	r = find_reg(&params, table, num);
 	if (!r)
 		r = find_reg(&params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
 
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/clear_page.S linux-libre-5.4.261-gnu1/arch/arm64/lib/clear_page.S
index 78a9ef66288a..073acbf02a7c 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/clear_page.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/clear_page.S
@@ -14,7 +14,7 @@
  * Parameters:
  *	x0 - dest
  */
-ENTRY(clear_page)
+SYM_FUNC_START(clear_page)
 	mrs	x1, dczid_el0
 	and	w1, w1, #0xf
 	mov	x2, #4
@@ -25,5 +25,5 @@ ENTRY(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	1b
 	ret
-ENDPROC(clear_page)
+SYM_FUNC_END(clear_page)
 EXPORT_SYMBOL(clear_page)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/clear_user.S linux-libre-5.4.261-gnu1/arch/arm64/lib/clear_user.S
index aeafc03e961a..48a3a26eff66 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/clear_user.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/clear_user.S
@@ -19,7 +19,7 @@
  *
  * Alignment fixed up by hardware.
  */
-ENTRY(__arch_clear_user)
+SYM_FUNC_START(__arch_clear_user)
 	mov	x2, x1			// save the size for fixup return
 	subs	x1, x1, #8
 	b.mi	2f
@@ -40,7 +40,7 @@ uao_user_alternative 9f, strh, sttrh, wzr, x0, 2
 uao_user_alternative 9f, strb, sttrb, wzr, x0, 0
 5:	mov	x0, #0
 	ret
-ENDPROC(__arch_clear_user)
+SYM_FUNC_END(__arch_clear_user)
 EXPORT_SYMBOL(__arch_clear_user)
 
 	.section .fixup,"ax"
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/copy_from_user.S linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_from_user.S
index ebb3c06cbb5d..8e25e89ad01f 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/copy_from_user.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_from_user.S
@@ -53,12 +53,12 @@
 	.endm
 
 end	.req	x5
-ENTRY(__arch_copy_from_user)
+SYM_FUNC_START(__arch_copy_from_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0				// Nothing to copy
 	ret
-ENDPROC(__arch_copy_from_user)
+SYM_FUNC_END(__arch_copy_from_user)
 EXPORT_SYMBOL(__arch_copy_from_user)
 
 	.section .fixup,"ax"
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/copy_in_user.S linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_in_user.S
index 3d8153a1ebce..667139013ed1 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/copy_in_user.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_in_user.S
@@ -55,12 +55,12 @@
 
 end	.req	x5
 
-ENTRY(__arch_copy_in_user)
+SYM_FUNC_START(__arch_copy_in_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0
 	ret
-ENDPROC(__arch_copy_in_user)
+SYM_FUNC_END(__arch_copy_in_user)
 EXPORT_SYMBOL(__arch_copy_in_user)
 
 	.section .fixup,"ax"
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/copy_page.S linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_page.S
index bbb8562396af..e125a84eb400 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/copy_page.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_page.S
@@ -17,7 +17,7 @@
  *	x0 - dest
  *	x1 - src
  */
-ENTRY(copy_page)
+SYM_FUNC_START(copy_page)
 alternative_if ARM64_HAS_NO_HW_PREFETCH
 	// Prefetch three cache lines ahead.
 	prfm	pldl1strm, [x1, #128]
@@ -75,5 +75,5 @@ alternative_else_nop_endif
 	stnp	x16, x17, [x0, #112]
 
 	ret
-ENDPROC(copy_page)
+SYM_FUNC_END(copy_page)
 EXPORT_SYMBOL(copy_page)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/copy_to_user.S linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_to_user.S
index 357eae2c18eb..1a104d0089f3 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/copy_to_user.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/copy_to_user.S
@@ -52,12 +52,12 @@
 	.endm
 
 end	.req	x5
-ENTRY(__arch_copy_to_user)
+SYM_FUNC_START(__arch_copy_to_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0
 	ret
-ENDPROC(__arch_copy_to_user)
+SYM_FUNC_END(__arch_copy_to_user)
 EXPORT_SYMBOL(__arch_copy_to_user)
 
 	.section .fixup,"ax"
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/crc32.S linux-libre-5.4.261-gnu1/arch/arm64/lib/crc32.S
index e6135f16649b..243e107e9896 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/crc32.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/crc32.S
@@ -85,17 +85,17 @@ CPU_BE(	rev16		w3, w3		)
 	.endm
 
 	.align		5
-ENTRY(crc32_le)
+SYM_FUNC_START(crc32_le)
 alternative_if_not ARM64_HAS_CRC32
 	b		crc32_le_base
 alternative_else_nop_endif
 	__crc32
-ENDPROC(crc32_le)
+SYM_FUNC_END(crc32_le)
 
 	.align		5
-ENTRY(__crc32c_le)
+SYM_FUNC_START(__crc32c_le)
 alternative_if_not ARM64_HAS_CRC32
 	b		__crc32c_le_base
 alternative_else_nop_endif
 	__crc32		c
-ENDPROC(__crc32c_le)
+SYM_FUNC_END(__crc32c_le)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/memchr.S linux-libre-5.4.261-gnu1/arch/arm64/lib/memchr.S
index 48a3ab636e4f..edf6b970a277 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/memchr.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/memchr.S
@@ -19,7 +19,7 @@
  * Returns:
  *	x0 - address of first occurrence of 'c' or 0
  */
-WEAK(memchr)
+SYM_FUNC_START_WEAK_PI(memchr)
 	and	w1, w1, #0xff
 1:	subs	x2, x2, #1
 	b.mi	2f
@@ -30,5 +30,5 @@ WEAK(memchr)
 	ret
 2:	mov	x0, #0
 	ret
-ENDPIPROC(memchr)
+SYM_FUNC_END_PI(memchr)
 EXPORT_SYMBOL_NOKASAN(memchr)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/memcmp.S linux-libre-5.4.261-gnu1/arch/arm64/lib/memcmp.S
index b297bdaaf549..c0671e793ea9 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/memcmp.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/memcmp.S
@@ -46,7 +46,7 @@ pos		.req	x11
 limit_wd	.req	x12
 mask		.req	x13
 
-WEAK(memcmp)
+SYM_FUNC_START_WEAK_PI(memcmp)
 	cbz	limit, .Lret0
 	eor	tmp1, src1, src2
 	tst	tmp1, #7
@@ -243,5 +243,5 @@ CPU_LE( rev	data2, data2 )
 .Lret0:
 	mov	result, #0
 	ret
-ENDPIPROC(memcmp)
+SYM_FUNC_END_PI(memcmp)
 EXPORT_SYMBOL_NOKASAN(memcmp)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/memcpy.S linux-libre-5.4.261-gnu1/arch/arm64/lib/memcpy.S
index d79f48994dbb..b03cbb3455d4 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/memcpy.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/memcpy.S
@@ -56,12 +56,11 @@
 	stp \ptr, \regB, [\regC], \val
 	.endm
 
-	.weak memcpy
-ENTRY(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_ALIAS(__memcpy)
+SYM_FUNC_START_WEAK_PI(memcpy)
 #include "copy_template.S"
 	ret
-ENDPIPROC(memcpy)
+SYM_FUNC_END_PI(memcpy)
 EXPORT_SYMBOL(memcpy)
-ENDPROC(__memcpy)
+SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(__memcpy)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/memmove.S linux-libre-5.4.261-gnu1/arch/arm64/lib/memmove.S
index 784775136480..1035dce4bdaf 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/memmove.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/memmove.S
@@ -45,9 +45,8 @@ C_h	.req	x12
 D_l	.req	x13
 D_h	.req	x14
 
-	.weak memmove
-ENTRY(__memmove)
-ENTRY(memmove)
+SYM_FUNC_START_ALIAS(__memmove)
+SYM_FUNC_START_WEAK_PI(memmove)
 	cmp	dstin, src
 	b.lo	__memcpy
 	add	tmp1, src, count
@@ -184,7 +183,7 @@ ENTRY(memmove)
 	tst	count, #0x3f
 	b.ne	.Ltail63
 	ret
-ENDPIPROC(memmove)
+SYM_FUNC_END_PI(memmove)
 EXPORT_SYMBOL(memmove)
-ENDPROC(__memmove)
+SYM_FUNC_END_ALIAS(__memmove)
 EXPORT_SYMBOL(__memmove)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/memset.S linux-libre-5.4.261-gnu1/arch/arm64/lib/memset.S
index 9fb97e6bc560..a9c1c9a01ea9 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/memset.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/memset.S
@@ -42,9 +42,8 @@ dst		.req	x8
 tmp3w		.req	w9
 tmp3		.req	x9
 
-	.weak memset
-ENTRY(__memset)
-ENTRY(memset)
+SYM_FUNC_START_ALIAS(__memset)
+SYM_FUNC_START_WEAK_PI(memset)
 	mov	dst, dstin	/* Preserve return value.  */
 	and	A_lw, val, #255
 	orr	A_lw, A_lw, A_lw, lsl #8
@@ -203,7 +202,7 @@ ENTRY(memset)
 	ands	count, count, zva_bits_x
 	b.ne	.Ltail_maybe_long
 	ret
-ENDPIPROC(memset)
+SYM_FUNC_END_PI(memset)
 EXPORT_SYMBOL(memset)
-ENDPROC(__memset)
+SYM_FUNC_END_ALIAS(__memset)
 EXPORT_SYMBOL(__memset)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strchr.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strchr.S
index ca3ec18171a4..1f47eae3b0d6 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strchr.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strchr.S
@@ -18,7 +18,7 @@
  * Returns:
  *	x0 - address of first occurrence of 'c' or 0
  */
-WEAK(strchr)
+SYM_FUNC_START_WEAK(strchr)
 	and	w1, w1, #0xff
 1:	ldrb	w2, [x0], #1
 	cmp	w2, w1
@@ -28,5 +28,5 @@ WEAK(strchr)
 	cmp	w2, w1
 	csel	x0, x0, xzr, eq
 	ret
-ENDPROC(strchr)
+SYM_FUNC_END(strchr)
 EXPORT_SYMBOL_NOKASAN(strchr)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strcmp.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strcmp.S
index e9aefbe0b740..4767540d1b94 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strcmp.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strcmp.S
@@ -48,7 +48,7 @@ tmp3		.req	x9
 zeroones	.req	x10
 pos		.req	x11
 
-WEAK(strcmp)
+SYM_FUNC_START_WEAK_PI(strcmp)
 	eor	tmp1, src1, src2
 	mov	zeroones, #REP8_01
 	tst	tmp1, #7
@@ -219,5 +219,5 @@ CPU_BE(	orr	syndrome, diff, has_nul )
 	lsr	data1, data1, #56
 	sub	result, data1, data2, lsr #56
 	ret
-ENDPIPROC(strcmp)
+SYM_FUNC_END_PI(strcmp)
 EXPORT_SYMBOL_NOKASAN(strcmp)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strlen.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strlen.S
index 87b0cb066915..ee3ed882dd79 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strlen.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strlen.S
@@ -44,7 +44,7 @@ pos		.req	x12
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
 #define REP8_80 0x8080808080808080
 
-WEAK(strlen)
+SYM_FUNC_START_WEAK_PI(strlen)
 	mov	zeroones, #REP8_01
 	bic	src, srcin, #15
 	ands	tmp1, srcin, #15
@@ -111,5 +111,5 @@ CPU_LE( lsr	tmp2, tmp2, tmp1 )	/* Shift (tmp1 & 63).  */
 	csinv	data1, data1, xzr, le
 	csel	data2, data2, data2a, le
 	b	.Lrealigned
-ENDPIPROC(strlen)
+SYM_FUNC_END_PI(strlen)
 EXPORT_SYMBOL_NOKASAN(strlen)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strncmp.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strncmp.S
index f571581888fa..2a7ee949ed47 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strncmp.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strncmp.S
@@ -52,7 +52,7 @@ limit_wd	.req	x13
 mask		.req	x14
 endloop		.req	x15
 
-WEAK(strncmp)
+SYM_FUNC_START_WEAK_PI(strncmp)
 	cbz	limit, .Lret0
 	eor	tmp1, src1, src2
 	mov	zeroones, #REP8_01
@@ -295,5 +295,5 @@ CPU_BE( orr	syndrome, diff, has_nul )
 .Lret0:
 	mov	result, #0
 	ret
-ENDPIPROC(strncmp)
+SYM_FUNC_END_PI(strncmp)
 EXPORT_SYMBOL_NOKASAN(strncmp)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strnlen.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strnlen.S
index c0bac9493c68..b72913a99038 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strnlen.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strnlen.S
@@ -47,7 +47,7 @@ limit_wd	.req	x14
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
 #define REP8_80 0x8080808080808080
 
-WEAK(strnlen)
+SYM_FUNC_START_WEAK_PI(strnlen)
 	cbz	limit, .Lhit_limit
 	mov	zeroones, #REP8_01
 	bic	src, srcin, #15
@@ -156,5 +156,5 @@ CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
 .Lhit_limit:
 	mov	len, limit
 	ret
-ENDPIPROC(strnlen)
+SYM_FUNC_END_PI(strnlen)
 EXPORT_SYMBOL_NOKASAN(strnlen)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/strrchr.S linux-libre-5.4.261-gnu1/arch/arm64/lib/strrchr.S
index 794ac49ea433..13132d1ed6d1 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/strrchr.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/strrchr.S
@@ -18,7 +18,7 @@
  * Returns:
  *	x0 - address of last occurrence of 'c' or 0
  */
-WEAK(strrchr)
+SYM_FUNC_START_WEAK_PI(strrchr)
 	mov	x3, #0
 	and	w1, w1, #0xff
 1:	ldrb	w2, [x0], #1
@@ -29,5 +29,5 @@ WEAK(strrchr)
 	b	1b
 2:	mov	x0, x3
 	ret
-ENDPIPROC(strrchr)
+SYM_FUNC_END_PI(strrchr)
 EXPORT_SYMBOL_NOKASAN(strrchr)
diff --git linux-libre-5.4-gnu1/arch/arm64/lib/tishift.S linux-libre-5.4.261-gnu1/arch/arm64/lib/tishift.S
index 047622536535..a88613834fb0 100644
--- linux-libre-5.4-gnu1/arch/arm64/lib/tishift.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/lib/tishift.S
@@ -7,7 +7,7 @@
 
 #include <asm/assembler.h>
 
-ENTRY(__ashlti3)
+SYM_FUNC_START(__ashlti3)
 	cbz	x2, 1f
 	mov	x3, #64
 	sub	x3, x3, x2
@@ -26,10 +26,10 @@ ENTRY(__ashlti3)
 	lsl	x1, x0, x1
 	mov	x0, x2
 	ret
-ENDPROC(__ashlti3)
+SYM_FUNC_END(__ashlti3)
 EXPORT_SYMBOL(__ashlti3)
 
-ENTRY(__ashrti3)
+SYM_FUNC_START(__ashrti3)
 	cbz	x2, 1f
 	mov	x3, #64
 	sub	x3, x3, x2
@@ -48,10 +48,10 @@ ENTRY(__ashrti3)
 	asr	x0, x1, x0
 	mov	x1, x2
 	ret
-ENDPROC(__ashrti3)
+SYM_FUNC_END(__ashrti3)
 EXPORT_SYMBOL(__ashrti3)
 
-ENTRY(__lshrti3)
+SYM_FUNC_START(__lshrti3)
 	cbz	x2, 1f
 	mov	x3, #64
 	sub	x3, x3, x2
@@ -70,5 +70,5 @@ ENTRY(__lshrti3)
 	lsr	x0, x1, x0
 	mov	x1, x2
 	ret
-ENDPROC(__lshrti3)
+SYM_FUNC_END(__lshrti3)
 EXPORT_SYMBOL(__lshrti3)
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/cache.S linux-libre-5.4.261-gnu1/arch/arm64/mm/cache.S
index db767b072601..7b054c67acd8 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/cache.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/cache.S
@@ -228,8 +228,6 @@ ENDPIPROC(__dma_flush_area)
  *	- dir	- DMA direction
  */
 ENTRY(__dma_map_area)
-	cmp	w2, #DMA_FROM_DEVICE
-	b.eq	__dma_inv_area
 	b	__dma_clean_area
 ENDPIPROC(__dma_map_area)
 
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/dma-mapping.c linux-libre-5.4.261-gnu1/arch/arm64/mm/dma-mapping.c
index 9239416e93d4..6c45350e33aa 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/dma-mapping.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/dma-mapping.c
@@ -13,14 +13,14 @@
 
 #include <asm/cacheflush.h>
 
-void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	__dma_map_area(phys_to_virt(paddr), size, dir);
 }
 
-void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	__dma_unmap_area(phys_to_virt(paddr), size, dir);
 }
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/fault.c linux-libre-5.4.261-gnu1/arch/arm64/mm/fault.c
index 9fc6db0bcbad..af9a6e1fa0d3 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/fault.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/fault.c
@@ -296,7 +296,7 @@ static void die_kernel_fault(const char *msg, unsigned long addr,
 	show_pte(addr);
 	die("Oops", regs, esr);
 	bust_spinlocks(0);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 }
 
 static void __do_kernel_fault(unsigned long addr, unsigned int esr,
@@ -403,8 +403,8 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re
 	}
 }
 
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
 
 static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr,
 			   unsigned int mm_flags, unsigned long vm_flags)
@@ -454,7 +454,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	const struct fault_info *inf;
 	struct mm_struct *mm = current->mm;
 	vm_fault_t fault, major = 0;
-	unsigned long vm_flags = VM_READ | VM_WRITE;
+	unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
 	unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (kprobe_page_fault(regs, esr))
@@ -654,11 +654,13 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 
 	inf = esr_to_fault_info(esr);
 
-	/*
-	 * Return value ignored as we rely on signal merging.
-	 * Future patches will make this more robust.
-	 */
-	apei_claim_sea(regs);
+	if (user_mode(regs) && apei_claim_sea(regs) == 0) {
+		/*
+		 * APEI claimed this as a firmware-first notification.
+		 * Some processing deferred to task_work before ret_to_user().
+		 */
+		return 0;
+	}
 
 	if (esr & ESR_ELx_FnV)
 		siaddr = NULL;
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/hugetlbpage.c linux-libre-5.4.261-gnu1/arch/arm64/mm/hugetlbpage.c
index bbeb6a5a6ba6..0be3355e3499 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/hugetlbpage.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/hugetlbpage.c
@@ -230,6 +230,8 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		ptep = (pte_t *)pudp;
 	} else if (sz == (CONT_PTE_SIZE)) {
 		pmdp = pmd_alloc(mm, pudp, addr);
+		if (!pmdp)
+			return NULL;
 
 		WARN_ON(addr & (sz - 1));
 		/*
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/init.c linux-libre-5.4.261-gnu1/arch/arm64/mm/init.c
index 45c00a54909c..cbcac03c0e0d 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/init.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/init.c
@@ -50,12 +50,6 @@
 s64 memstart_addr __ro_after_init = -1;
 EXPORT_SYMBOL(memstart_addr);
 
-s64 physvirt_offset __ro_after_init;
-EXPORT_SYMBOL(physvirt_offset);
-
-struct page *vmemmap __ro_after_init;
-EXPORT_SYMBOL(vmemmap);
-
 phys_addr_t arm64_dma_phys_limit __ro_after_init;
 
 #ifdef CONFIG_KEXEC_CORE
@@ -251,6 +245,18 @@ int pfn_valid(unsigned long pfn)
 
 	if (!valid_section(__nr_to_section(pfn_to_section_nr(pfn))))
 		return 0;
+
+	/*
+	 * ZONE_DEVICE memory does not have the memblock entries.
+	 * memblock_is_map_memory() check for ZONE_DEVICE based
+	 * addresses will always fail. Even the normal hotplugged
+	 * memory will never have MEMBLOCK_NOMAP flag set in their
+	 * memblock entries. Skip memblock search for all non early
+	 * memory sections covering all of hotplug memory including
+	 * both normal and ZONE_DEVICE based.
+	 */
+	if (!early_section(__pfn_to_section(pfn)))
+		return pfn_section_valid(__pfn_to_section(pfn), pfn);
 #endif
 	return memblock_is_map_memory(addr);
 }
@@ -321,20 +327,6 @@ void __init arm64_memblock_init(void)
 	memstart_addr = round_down(memblock_start_of_DRAM(),
 				   ARM64_MEMSTART_ALIGN);
 
-	physvirt_offset = PHYS_OFFSET - PAGE_OFFSET;
-
-	vmemmap = ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT));
-
-	/*
-	 * If we are running with a 52-bit kernel VA config on a system that
-	 * does not support it, we have to offset our vmemmap and physvirt_offset
-	 * s.t. we avoid the 52-bit portion of the direct linear map
-	 */
-	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52)) {
-		vmemmap += (_PAGE_OFFSET(48) - _PAGE_OFFSET(52)) >> PAGE_SHIFT;
-		physvirt_offset = PHYS_OFFSET - _PAGE_OFFSET(48);
-	}
-
 	/*
 	 * Remove the memory that we will not be able to cover with the
 	 * linear mapping. Take care not to clip the kernel which may be
@@ -349,6 +341,16 @@ void __init arm64_memblock_init(void)
 		memblock_remove(0, memstart_addr);
 	}
 
+	/*
+	 * If we are running with a 52-bit kernel VA config on a system that
+	 * does not support it, we have to place the available physical
+	 * memory in the 48-bit addressable part of the linear region, i.e.,
+	 * we have to move it upward. Since memstart_addr represents the
+	 * physical address of PAGE_OFFSET, we have to *subtract* from it.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52))
+		memstart_addr -= _PAGE_OFFSET(48) - _PAGE_OFFSET(52);
+
 	/*
 	 * Apply the memory limit if it was set. Since the kernel may be loaded
 	 * high up in memory, add back the kernel region that must be accessible
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/ioremap.c linux-libre-5.4.261-gnu1/arch/arm64/mm/ioremap.c
index 9be71bee902c..8dac7fcfb4bd 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/ioremap.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/ioremap.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -100,3 +101,11 @@ void __init early_ioremap_init(void)
 {
 	early_ioremap_setup();
 }
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return memblock_is_map_memory(pfn);
+}
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/mmu.c linux-libre-5.4.261-gnu1/arch/arm64/mm/mmu.c
index 60c929f3683b..8e934bb44f12 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/mmu.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/mmu.c
@@ -38,7 +38,7 @@
 #define NO_BLOCK_MAPPINGS	BIT(0)
 #define NO_CONT_MAPPINGS	BIT(1)
 
-u64 idmap_t0sz = TCR_T0SZ(VA_BITS);
+u64 idmap_t0sz = TCR_T0SZ(VA_BITS_MIN);
 u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
 
 u64 __section(".mmuoff.data.write") vabits_actual;
@@ -399,7 +399,7 @@ static phys_addr_t pgd_pgtable_alloc(int shift)
 static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
 				  phys_addr_t size, pgprot_t prot)
 {
-	if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
+	if (virt < PAGE_OFFSET) {
 		pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n",
 			&phys, virt);
 		return;
@@ -426,7 +426,7 @@ void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
 				phys_addr_t size, pgprot_t prot)
 {
-	if ((virt >= PAGE_END) && (virt < VMALLOC_START)) {
+	if (virt < PAGE_OFFSET) {
 		pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n",
 			&phys, virt);
 		return;
@@ -583,6 +583,8 @@ early_param("rodata", parse_rodata);
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 static int __init map_entry_trampoline(void)
 {
+	int i;
+
 	pgprot_t prot = rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
 	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
 
@@ -591,11 +593,15 @@ static int __init map_entry_trampoline(void)
 
 	/* Map only the text into the trampoline page table */
 	memset(tramp_pg_dir, 0, PGD_SIZE);
-	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS, PAGE_SIZE,
-			     prot, __pgd_pgtable_alloc, 0);
+	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
+			     entry_tramp_text_size(), prot,
+			     __pgd_pgtable_alloc, NO_BLOCK_MAPPINGS);
 
 	/* Map both the text and data into the kernel page table */
-	__set_fixmap(FIX_ENTRY_TRAMP_TEXT, pa_start, prot);
+	for (i = 0; i < DIV_ROUND_UP(entry_tramp_text_size(), PAGE_SIZE); i++)
+		__set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
+			     pa_start + i * PAGE_SIZE, prot);
+
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
 		extern char __entry_tramp_data_start[];
 
@@ -1069,7 +1075,6 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
 	/*
 	 * FIXME: Cleanup page tables (also in arch_add_memory() in case
@@ -1078,7 +1083,6 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 	 * unplug. ARCH_ENABLE_MEMORY_HOTREMOVE must not be
 	 * unlocked yet.
 	 */
-	zone = page_zone(pfn_to_page(start_pfn));
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
+	__remove_pages(start_pfn, nr_pages, altmap);
 }
 #endif
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/numa.c linux-libre-5.4.261-gnu1/arch/arm64/mm/numa.c
index 4decf1659700..53ebb4babf3a 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/numa.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/numa.c
@@ -46,7 +46,11 @@ EXPORT_SYMBOL(node_to_cpumask_map);
  */
 const struct cpumask *cpumask_of_node(int node)
 {
-	if (WARN_ON(node >= nr_node_ids))
+
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	if (WARN_ON(node < 0 || node >= nr_node_ids))
 		return cpu_none_mask;
 
 	if (WARN_ON(node_to_cpumask_map[node] == NULL))
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/physaddr.c linux-libre-5.4.261-gnu1/arch/arm64/mm/physaddr.c
index 67a9ba9eaa96..cde44c13dda1 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/physaddr.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/physaddr.c
@@ -9,7 +9,7 @@
 
 phys_addr_t __virt_to_phys(unsigned long x)
 {
-	WARN(!__is_lm_address(x),
+	WARN(!__is_lm_address(__tag_reset(x)),
 	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
 	      (void *)x,
 	      (void *)x);
diff --git linux-libre-5.4-gnu1/arch/arm64/mm/proc.S linux-libre-5.4.261-gnu1/arch/arm64/mm/proc.S
index a1e0592d1fbc..13e78a5d8690 100644
--- linux-libre-5.4-gnu1/arch/arm64/mm/proc.S
+++ linux-libre-5.4.261-gnu1/arch/arm64/mm/proc.S
@@ -166,7 +166,7 @@ ENDPROC(cpu_do_switch_mm)
 	.pushsection ".idmap.text", "awx"
 
 .macro	__idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
-	adrp	\tmp1, empty_zero_page
+	adrp	\tmp1, reserved_pg_dir
 	phys_to_ttbr \tmp2, \tmp1
 	offset_ttbr1 \tmp2, \tmp1
 	msr	ttbr1_el1, \tmp2
diff --git linux-libre-5.4-gnu1/arch/arm64/net/bpf_jit_comp.c linux-libre-5.4.261-gnu1/arch/arm64/net/bpf_jit_comp.c
index cdc79de0c794..9f71ca441482 100644
--- linux-libre-5.4-gnu1/arch/arm64/net/bpf_jit_comp.c
+++ linux-libre-5.4.261-gnu1/arch/arm64/net/bpf_jit_comp.c
@@ -141,14 +141,17 @@ static inline void emit_addr_mov_i64(const int reg, const u64 val,
 	}
 }
 
-static inline int bpf2a64_offset(int bpf_to, int bpf_from,
+static inline int bpf2a64_offset(int bpf_insn, int off,
 				 const struct jit_ctx *ctx)
 {
-	int to = ctx->offset[bpf_to];
-	/* -1 to account for the Branch instruction */
-	int from = ctx->offset[bpf_from] - 1;
-
-	return to - from;
+	/* BPF JMP offset is relative to the next instruction */
+	bpf_insn++;
+	/*
+	 * Whereas arm64 branch instructions encode the offset
+	 * from the branch itself, so we must subtract 1 from the
+	 * instruction offset.
+	 */
+	return ctx->offset[bpf_insn + off] - (ctx->offset[bpf_insn] - 1);
 }
 
 static void jit_fill_hole(void *area, unsigned int size)
@@ -532,7 +535,7 @@ emit_bswap_uxt:
 
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
-		jmp_offset = bpf2a64_offset(i + off, i, ctx);
+		jmp_offset = bpf2a64_offset(i, off, ctx);
 		check_imm26(jmp_offset);
 		emit(A64_B(jmp_offset), ctx);
 		break;
@@ -559,7 +562,7 @@ emit_bswap_uxt:
 	case BPF_JMP32 | BPF_JSLE | BPF_X:
 		emit(A64_CMP(is64, dst, src), ctx);
 emit_cond_jmp:
-		jmp_offset = bpf2a64_offset(i + off, i, ctx);
+		jmp_offset = bpf2a64_offset(i, off, ctx);
 		check_imm19(jmp_offset);
 		switch (BPF_OP(code)) {
 		case BPF_JEQ:
@@ -698,6 +701,19 @@ emit_cond_jmp:
 		}
 		break;
 
+	/* speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		/*
+		 * Nothing required here.
+		 *
+		 * In case of arm64, we rely on the firmware mitigation of
+		 * Speculative Store Bypass as controlled via the ssbd kernel
+		 * parameter. Whenever the mitigation is enabled, it works
+		 * for all of the kernel code with no need to provide any
+		 * additional instructions.
+		 */
+		break;
+
 	/* ST: *(size *)(dst + off) = imm */
 	case BPF_ST | BPF_MEM | BPF_W:
 	case BPF_ST | BPF_MEM | BPF_H:
@@ -780,10 +796,21 @@ static int build_body(struct jit_ctx *ctx, bool extra_pass)
 	const struct bpf_prog *prog = ctx->prog;
 	int i;
 
+	/*
+	 * - offset[0] offset of the end of prologue,
+	 *   start of the 1st instruction.
+	 * - offset[1] - offset of the end of 1st instruction,
+	 *   start of the 2nd instruction
+	 * [....]
+	 * - offset[3] - offset of the end of 3rd instruction,
+	 *   start of 4th instruction
+	 */
 	for (i = 0; i < prog->len; i++) {
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;
 
+		if (ctx->image == NULL)
+			ctx->offset[i] = ctx->idx;
 		ret = build_insn(insn, ctx, extra_pass);
 		if (ret > 0) {
 			i++;
@@ -791,11 +818,16 @@ static int build_body(struct jit_ctx *ctx, bool extra_pass)
 				ctx->offset[i] = ctx->idx;
 			continue;
 		}
-		if (ctx->image == NULL)
-			ctx->offset[i] = ctx->idx;
 		if (ret)
 			return ret;
 	}
+	/*
+	 * offset is allocated with prog->len + 1 so fill in
+	 * the last element with the offset after the last
+	 * instruction (end of program)
+	 */
+	if (ctx->image == NULL)
+		ctx->offset[i] = ctx->idx;
 
 	return 0;
 }
@@ -871,21 +903,24 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	memset(&ctx, 0, sizeof(ctx));
 	ctx.prog = prog;
 
-	ctx.offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL);
+	ctx.offset = kcalloc(prog->len + 1, sizeof(int), GFP_KERNEL);
 	if (ctx.offset == NULL) {
 		prog = orig_prog;
 		goto out_off;
 	}
 
-	/* 1. Initial fake pass to compute ctx->idx. */
-
-	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx, extra_pass)) {
+	/*
+	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
+	 *
+	 * BPF line info needs ctx->offset[i] to be the offset of
+	 * instruction[i] in jited image, so build prologue first.
+	 */
+	if (build_prologue(&ctx, was_classic)) {
 		prog = orig_prog;
 		goto out_off;
 	}
 
-	if (build_prologue(&ctx, was_classic)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@@ -938,6 +973,7 @@ skip_init_ctx:
 			bpf_jit_binary_free(header);
 			prog->bpf_func = NULL;
 			prog->jited = 0;
+			prog->jited_len = 0;
 			goto out_off;
 		}
 		bpf_jit_binary_lock_ro(header);
@@ -951,7 +987,12 @@ skip_init_ctx:
 	prog->jited_len = image_size;
 
 	if (!prog->is_func || extra_pass) {
-		bpf_prog_fill_jited_linfo(prog, ctx.offset);
+		int i;
+
+		/* offset[prog->len] is the size of program */
+		for (i = 0; i <= prog->len; i++)
+			ctx.offset[i] *= AARCH64_INSN_SIZE;
+		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
 out_off:
 		kfree(ctx.offset);
 		kfree(jit_data);
@@ -964,6 +1005,11 @@ out:
 	return prog;
 }
 
+u64 bpf_jit_alloc_exec_limit(void)
+{
+	return BPF_JIT_REGION_SIZE;
+}
+
 void *bpf_jit_alloc_exec(unsigned long size)
 {
 	return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
diff --git linux-libre-5.4-gnu1/arch/c6x/mm/dma-coherent.c linux-libre-5.4.261-gnu1/arch/c6x/mm/dma-coherent.c
index b319808e8f6b..a5909091cb14 100644
--- linux-libre-5.4-gnu1/arch/c6x/mm/dma-coherent.c
+++ linux-libre-5.4.261-gnu1/arch/c6x/mm/dma-coherent.c
@@ -140,7 +140,7 @@ void __init coherent_mem_init(phys_addr_t start, u32 size)
 		      sizeof(long));
 }
 
-static void c6x_dma_sync(struct device *dev, phys_addr_t paddr, size_t size,
+static void c6x_dma_sync(phys_addr_t paddr, size_t size,
 		enum dma_data_direction dir)
 {
 	BUG_ON(!valid_dma_direction(dir));
@@ -160,14 +160,14 @@ static void c6x_dma_sync(struct device *dev, phys_addr_t paddr, size_t size,
 	}
 }
 
-void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
-	return c6x_dma_sync(dev, paddr, size, dir);
+	return c6x_dma_sync(paddr, size, dir);
 }
 
-void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
-	return c6x_dma_sync(dev, paddr, size, dir);
+	return c6x_dma_sync(paddr, size, dir);
 }
diff --git linux-libre-5.4-gnu1/arch/csky/Kconfig linux-libre-5.4.261-gnu1/arch/csky/Kconfig
index 3973847b5f42..4f48a2f0513b 100644
--- linux-libre-5.4-gnu1/arch/csky/Kconfig
+++ linux-libre-5.4.261-gnu1/arch/csky/Kconfig
@@ -36,6 +36,7 @@ config CSKY
 	select GX6605S_TIMER if CPU_CK610
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -74,7 +75,7 @@ config CPU_HAS_TLBI
 config CPU_HAS_LDSTEX
 	bool
 	help
-	  For SMP, CPU needs "ldex&stex" instrcutions to atomic operations.
+	  For SMP, CPU needs "ldex&stex" instructions for atomic operations.
 
 config CPU_NEED_TLBSYNC
 	bool
@@ -219,7 +220,7 @@ config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	default "11"
 
-config RAM_BASE
+config DRAM_BASE
 	hex "DRAM start addr (the same with memory-section in dts)"
 	default 0x0
 
diff --git linux-libre-5.4-gnu1/arch/csky/abiv1/alignment.c linux-libre-5.4.261-gnu1/arch/csky/abiv1/alignment.c
index cb2a0d94a144..2df115d0e210 100644
--- linux-libre-5.4-gnu1/arch/csky/abiv1/alignment.c
+++ linux-libre-5.4.261-gnu1/arch/csky/abiv1/alignment.c
@@ -294,7 +294,7 @@ bad_area:
 				__func__, opcode, rz, rx, imm, addr);
 		show_regs(regs);
 		bust_spinlocks(0);
-		do_exit(SIGKILL);
+		make_task_dead(SIGKILL);
 	}
 
 	force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)addr);
diff --git linux-libre-5.4-gnu1/arch/csky/abiv1/inc/abi/entry.h linux-libre-5.4.261-gnu1/arch/csky/abiv1/inc/abi/entry.h
index 7ab78bd0f3b1..61d94ec7dd16 100644
--- linux-libre-5.4-gnu1/arch/csky/abiv1/inc/abi/entry.h
+++ linux-libre-5.4.261-gnu1/arch/csky/abiv1/inc/abi/entry.h
@@ -16,14 +16,16 @@
 #define LSAVE_A4	40
 #define LSAVE_A5	44
 
+#define usp ss1
+
 .macro USPTOKSP
-	mtcr	sp, ss1
+	mtcr	sp, usp
 	mfcr	sp, ss0
 .endm
 
 .macro KSPTOUSP
 	mtcr	sp, ss0
-	mfcr	sp, ss1
+	mfcr	sp, usp
 .endm
 
 .macro	SAVE_ALL epc_inc
@@ -45,7 +47,13 @@
 	add	lr, r13
 	stw     lr, (sp, 8)
 
+	mov	lr, sp
+	addi	lr, 32
+	addi	lr, 32
+	addi	lr, 16
+	bt	2f
 	mfcr	lr, ss1
+2:
 	stw     lr, (sp, 16)
 
 	stw     a0, (sp, 20)
@@ -79,9 +87,10 @@
 	ldw     a0, (sp, 12)
 	mtcr    a0, epsr
 	btsti   a0, 31
+	bt      1f
 	ldw     a0, (sp, 16)
 	mtcr	a0, ss1
-
+1:
 	ldw     a0, (sp, 24)
 	ldw     a1, (sp, 28)
 	ldw     a2, (sp, 32)
@@ -102,9 +111,9 @@
 	addi	sp, 32
 	addi	sp, 8
 
-	bt      1f
+	bt      2f
 	KSPTOUSP
-1:
+2:
 	rte
 .endm
 
@@ -158,15 +167,12 @@
 	 *   BA     Reserved  C   D   V
 	 */
 	cprcr	r6, cpcr30
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0xe
+	movi	r6, 0
 	cpwcr	r6, cpcr31
 .endm
 
diff --git linux-libre-5.4-gnu1/arch/csky/abiv2/fpu.c linux-libre-5.4.261-gnu1/arch/csky/abiv2/fpu.c
index 86d187d4e5af..5acc5c2e544e 100644
--- linux-libre-5.4-gnu1/arch/csky/abiv2/fpu.c
+++ linux-libre-5.4.261-gnu1/arch/csky/abiv2/fpu.c
@@ -10,11 +10,6 @@
 #define MTCR_DIST	0xC0006420
 #define MFCR_DIST	0xC0006020
 
-void __init init_fpu(void)
-{
-	mtcr("cr<1, 2>", 0);
-}
-
 /*
  * fpu_libc_helper() is to help libc to excute:
  *  - mfcr %a, cr<1, 2>
diff --git linux-libre-5.4-gnu1/arch/csky/abiv2/inc/abi/entry.h linux-libre-5.4.261-gnu1/arch/csky/abiv2/inc/abi/entry.h
index 9897a16b45e5..ac8f65a3e75a 100644
--- linux-libre-5.4-gnu1/arch/csky/abiv2/inc/abi/entry.h
+++ linux-libre-5.4.261-gnu1/arch/csky/abiv2/inc/abi/entry.h
@@ -13,6 +13,8 @@
 #define LSAVE_A1	28
 #define LSAVE_A2	32
 #define LSAVE_A3	36
+#define LSAVE_A4	40
+#define LSAVE_A5	44
 
 #define KSPTOUSP
 #define USPTOKSP
@@ -31,7 +33,13 @@
 
 	mfcr	lr, epsr
 	stw	lr, (sp, 12)
+	btsti   lr, 31
+	bf      1f
+	addi    lr, sp, 152
+	br	2f
+1:
 	mfcr	lr, usp
+2:
 	stw	lr, (sp, 16)
 
 	stw     a0, (sp, 20)
@@ -64,8 +72,10 @@
 	mtcr	a0, epc
 	ldw	a0, (sp, 12)
 	mtcr	a0, epsr
+	btsti   a0, 31
 	ldw	a0, (sp, 16)
 	mtcr	a0, usp
+	mtcr	a0, ss0
 
 #ifdef CONFIG_CPU_HAS_HILO
 	ldw	a0, (sp, 140)
@@ -86,6 +96,9 @@
 	addi    sp, 40
 	ldm     r16-r30, (sp)
 	addi    sp, 72
+	bf	1f
+	mfcr	sp, ss0
+1:
 	rte
 .endm
 
@@ -214,16 +227,13 @@
 	 */
 	mfcr	r6, cr<30, 15> /* Get MSA0 */
 2:
-	lsri	r6, 28
-	lsli	r6, 28
+	lsri	r6, 29
+	lsli	r6, 29
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0x1ce
-	mtcr	r6, cr<31, 15> /* Set MSA1 */
+	movi    r6, 0
+	mtcr	r6, cr<31, 15> /* Clr MSA1 */
 
 	/* enable MMU */
 	mfcr    r6, cr18
diff --git linux-libre-5.4-gnu1/arch/csky/abiv2/inc/abi/fpu.h linux-libre-5.4.261-gnu1/arch/csky/abiv2/inc/abi/fpu.h
index 22ca3cf2794a..09e2700a3693 100644
--- linux-libre-5.4-gnu1/arch/csky/abiv2/inc/abi/fpu.h
+++ linux-libre-5.4.261-gnu1/arch/csky/abiv2/inc/abi/fpu.h
@@ -9,7 +9,8 @@
 
 int fpu_libc_helper(struct pt_regs *regs);
 void fpu_fpe(struct pt_regs *regs);
-void __init init_fpu(void);
+
+static inline void init_fpu(void) { mtcr("cr<1, 2>", 0); }
 
 void save_to_user_fp(struct user_fp *user_fp);
 void restore_from_user_fp(struct user_fp *user_fp);
diff --git linux-libre-5.4-gnu1/arch/csky/include/asm/page.h linux-libre-5.4.261-gnu1/arch/csky/include/asm/page.h
index 9738eacefdc7..62bb307459ca 100644
--- linux-libre-5.4-gnu1/arch/csky/include/asm/page.h
+++ linux-libre-5.4.261-gnu1/arch/csky/include/asm/page.h
@@ -28,7 +28,7 @@
 #define SSEG_SIZE	0x20000000
 #define LOWMEM_LIMIT	(SSEG_SIZE * 2)
 
-#define PHYS_OFFSET_OFFSET (CONFIG_RAM_BASE & (SSEG_SIZE - 1))
+#define PHYS_OFFSET_OFFSET (CONFIG_DRAM_BASE & (SSEG_SIZE - 1))
 
 #ifndef __ASSEMBLY__
 
diff --git linux-libre-5.4-gnu1/arch/csky/include/asm/processor.h linux-libre-5.4.261-gnu1/arch/csky/include/asm/processor.h
index 21e0bd5293dd..c6bcd7f7c720 100644
--- linux-libre-5.4-gnu1/arch/csky/include/asm/processor.h
+++ linux-libre-5.4.261-gnu1/arch/csky/include/asm/processor.h
@@ -43,6 +43,7 @@ extern struct cpuinfo_csky cpu_data[];
 struct thread_struct {
 	unsigned long  ksp;       /* kernel stack pointer */
 	unsigned long  sr;        /* saved status register */
+	unsigned long  trap_no;   /* saved status register */
 
 	/* FPU regs */
 	struct user_fp __aligned(16) user_fp;
diff --git linux-libre-5.4-gnu1/arch/csky/include/asm/uaccess.h linux-libre-5.4.261-gnu1/arch/csky/include/asm/uaccess.h
index eaa1c3403a42..60f8a4112588 100644
--- linux-libre-5.4-gnu1/arch/csky/include/asm/uaccess.h
+++ linux-libre-5.4.261-gnu1/arch/csky/include/asm/uaccess.h
@@ -254,7 +254,7 @@ do {								\
 
 extern int __get_user_bad(void);
 
-#define __copy_user(to, from, n)			\
+#define ___copy_to_user(to, from, n)			\
 do {							\
 	int w0, w1, w2, w3;				\
 	asm volatile(					\
@@ -289,31 +289,34 @@ do {							\
 	"       subi    %0, 4           \n"		\
 	"       br      3b              \n"		\
 	"5:     cmpnei  %0, 0           \n"  /* 1B */   \
-	"       bf      8f              \n"		\
+	"       bf      13f             \n"		\
 	"       ldb     %3, (%2, 0)     \n"		\
 	"6:     stb     %3, (%1, 0)     \n"		\
 	"       addi    %2,  1          \n"		\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"7:     br      8f              \n"		\
+	"7:     subi	%0,  4          \n"		\
+	"8:     subi	%0,  4          \n"		\
+	"12:    subi	%0,  4          \n"		\
+	"       br      13f             \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 7b                \n"		\
-	".long    9b, 7b                \n"		\
-	".long   10b, 7b                \n"		\
+	".long    2b, 13f               \n"		\
+	".long    4b, 13f               \n"		\
+	".long    6b, 13f               \n"		\
+	".long    9b, 12b               \n"		\
+	".long   10b, 8b                \n"		\
 	".long   11b, 7b                \n"		\
-	".long    4b, 7b                \n"		\
-	".long    6b, 7b                \n"		\
 	".previous                      \n"		\
-	"8:                             \n"		\
+	"13:                            \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(w0),	\
 	  "=r"(w1), "=r"(w2), "=r"(w3)			\
 	: "0"(n), "1"(to), "2"(from)			\
 	: "memory");					\
 } while (0)
 
-#define __copy_user_zeroing(to, from, n)		\
+#define ___copy_from_user(to, from, n)			\
 do {							\
 	int tmp;					\
 	int nsave;					\
@@ -356,22 +359,22 @@ do {							\
 	"       addi    %1,  1          \n"		\
 	"       subi    %0,  1          \n"		\
 	"       br      5b              \n"		\
-	"8:     mov     %3, %0          \n"		\
-	"       movi    %4, 0           \n"		\
-	"9:     stb     %4, (%1, 0)     \n"		\
-	"       addi    %1, 1           \n"		\
-	"       subi    %3, 1           \n"		\
-	"       cmpnei  %3, 0           \n"		\
-	"       bt      9b              \n"		\
-	"       br      7f              \n"		\
+	"8:     stw     %3, (%1, 0)     \n"		\
+	"       subi    %0, 4           \n"		\
+	"       bf      7f              \n"		\
+	"9:     subi    %0, 8           \n"		\
+	"       bf      7f              \n"		\
+	"13:    stw     %3, (%1, 8)     \n"		\
+	"       subi    %0, 12          \n"		\
+	"       bf      7f              \n"		\
 	".section __ex_table, \"a\"     \n"		\
 	".align   2                     \n"		\
-	".long    2b, 8b                \n"		\
+	".long    2b, 7f                \n"		\
+	".long    4b, 7f                \n"		\
+	".long    6b, 7f                \n"		\
 	".long   10b, 8b                \n"		\
-	".long   11b, 8b                \n"		\
-	".long   12b, 8b                \n"		\
-	".long    4b, 8b                \n"		\
-	".long    6b, 8b                \n"		\
+	".long   11b, 9b                \n"		\
+	".long   12b,13b                \n"		\
 	".previous                      \n"		\
 	"7:                             \n"		\
 	: "=r"(n), "=r"(to), "=r"(from), "=r"(nsave),	\
diff --git linux-libre-5.4-gnu1/arch/csky/include/uapi/asm/unistd.h linux-libre-5.4.261-gnu1/arch/csky/include/uapi/asm/unistd.h
index 211c983c7282..ba4018929733 100644
--- linux-libre-5.4-gnu1/arch/csky/include/uapi/asm/unistd.h
+++ linux-libre-5.4.261-gnu1/arch/csky/include/uapi/asm/unistd.h
@@ -1,7 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
 
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_TIME32_SYSCALLS
 #include <asm-generic/unistd.h>
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/atomic.S linux-libre-5.4.261-gnu1/arch/csky/kernel/atomic.S
index 5b84f11485ae..3821ef9b7567 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/atomic.S
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/atomic.S
@@ -17,10 +17,12 @@ ENTRY(csky_cmpxchg)
 	mfcr	a3, epc
 	addi	a3, TRAP0_SIZE
 
-	subi    sp, 8
+	subi    sp, 16
 	stw     a3, (sp, 0)
 	mfcr    a3, epsr
 	stw     a3, (sp, 4)
+	mfcr	a3, usp
+	stw     a3, (sp, 8)
 
 	psrset	ee
 #ifdef CONFIG_CPU_HAS_LDSTEX
@@ -47,7 +49,9 @@ ENTRY(csky_cmpxchg)
 	mtcr	a3, epc
 	ldw     a3, (sp, 4)
 	mtcr	a3, epsr
-	addi	sp, 8
+	ldw     a3, (sp, 8)
+	mtcr	a3, usp
+	addi	sp, 16
 	KSPTOUSP
 	rte
 END(csky_cmpxchg)
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/entry.S linux-libre-5.4.261-gnu1/arch/csky/kernel/entry.S
index a7a5b67df898..4349528fbf38 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/entry.S
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/entry.S
@@ -170,8 +170,10 @@ csky_syscall_trace:
 	ldw	a3, (sp, LSAVE_A3)
 #if defined(__CSKYABIV2__)
 	subi	sp, 8
-	stw	r5, (sp, 0x4)
-	stw	r4, (sp, 0x0)
+	ldw	r9, (sp, LSAVE_A4)
+	stw	r9, (sp, 0x0)
+	ldw	r9, (sp, LSAVE_A5)
+	stw	r9, (sp, 0x4)
 #else
 	ldw	r6, (sp, LSAVE_A4)
 	ldw	r7, (sp, LSAVE_A5)
@@ -318,8 +320,6 @@ ENTRY(__switch_to)
 
 	mfcr	a2, psr			/* Save PSR value */
 	stw	a2, (a3, THREAD_SR)	/* Save PSR in task struct */
-	bclri	a2, 6			/* Disable interrupts */
-	mtcr	a2, psr
 
 	SAVE_SWITCH_STACK
 
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/head.S linux-libre-5.4.261-gnu1/arch/csky/kernel/head.S
index 61989f9241c0..17ed9d250480 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/head.S
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/head.S
@@ -21,6 +21,11 @@ END(_start)
 ENTRY(_start_smp_secondary)
 	SETUP_MMU
 
+	/* copy msa1 from CPU0 */
+	lrw     r6, secondary_msa1
+	ld.w	r6, (r6, 0)
+	mtcr	r6, cr<31, 15>
+
 	/* set stack point */
 	lrw     r6, secondary_stack
 	ld.w	r6, (r6, 0)
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/perf_callchain.c linux-libre-5.4.261-gnu1/arch/csky/kernel/perf_callchain.c
index e68ff375c8f8..35318a635a5f 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/perf_callchain.c
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/perf_callchain.c
@@ -12,12 +12,17 @@ struct stackframe {
 
 static int unwind_frame_kernel(struct stackframe *frame)
 {
-	if (kstack_end((void *)frame->fp))
+	unsigned long low = (unsigned long)task_stack_page(current);
+	unsigned long high = low + THREAD_SIZE;
+
+	if (unlikely(frame->fp < low || frame->fp > high))
 		return -EPERM;
-	if (frame->fp & 0x3 || frame->fp < TASK_SIZE)
+
+	if (kstack_end((void *)frame->fp) || frame->fp & 0x3)
 		return -EPERM;
 
 	*frame = *(struct stackframe *)frame->fp;
+
 	if (__kernel_text_address(frame->lr)) {
 		int graph = 0;
 
@@ -81,10 +86,11 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
 void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
 			 struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	unsigned long fp = 0;
 
 	/* C-SKY does not support virtualization. */
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
+	if (guest_cbs && guest_cbs->is_in_guest())
 		return;
 
 	fp = regs->regs[4];
@@ -105,10 +111,11 @@ void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
 void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
 			   struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe fr;
 
 	/* C-SKY does not support virtualization. */
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		pr_warn("C-SKY does not support perf in guest mode!");
 		return;
 	}
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/process.c linux-libre-5.4.261-gnu1/arch/csky/kernel/process.c
index f320d9248a22..397962e11bd1 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/process.c
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/process.c
@@ -34,10 +34,11 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sw->r15;
 }
 
-int copy_thread(unsigned long clone_flags,
+int copy_thread_tls(unsigned long clone_flags,
 		unsigned long usp,
 		unsigned long kthread_arg,
-		struct task_struct *p)
+		struct task_struct *p,
+		unsigned long tls)
 {
 	struct switch_stack *childstack;
 	struct pt_regs *childregs = task_pt_regs(p);
@@ -64,7 +65,7 @@ int copy_thread(unsigned long clone_flags,
 			childregs->usp = usp;
 		if (clone_flags & CLONE_SETTLS)
 			task_thread_info(p)->tp_value = childregs->tls
-						      = childregs->regs[0];
+						      = tls;
 
 		childregs->a0 = 0;
 		childstack->r15 = (unsigned long) ret_from_fork;
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/ptrace.c linux-libre-5.4.261-gnu1/arch/csky/kernel/ptrace.c
index 313623a19ecb..885194720fe0 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/ptrace.c
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/ptrace.c
@@ -96,7 +96,8 @@ static int gpr_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	regs.sr = task_pt_regs(target)->sr;
+	/* BIT(0) of regs.sr is Condition Code/Carry bit */
+	regs.sr = (regs.sr & BIT(0)) | (task_pt_regs(target)->sr & ~BIT(0));
 #ifdef CONFIG_CPU_HAS_HILO
 	regs.dcsr = task_pt_regs(target)->dcsr;
 #endif
diff --git linux-libre-5.4-gnu1/arch/csky/kernel/setup.c linux-libre-5.4.261-gnu1/arch/csky/kernel/setup.c
index 23ee604aafdb..2c1e253abb74 100644
--- linux-libre-5.4-gnu1/arch/csky/kernel/setup.c
+++ linux-libre-5.4.261-gnu1/arch/csky/kernel/setup.c
@@ -24,26 +24,9 @@ struct screen_info screen_info = {
 };
 #endif
 
-phys_addr_t __init_memblock memblock_end_of_REG0(void)
-{
-	return (memblock.memory.regions[0].base +
-		memblock.memory.regions[0].size);
-}
-
-phys_addr_t __init_memblock memblock_start_of_REG1(void)
-{
-	return memblock.memory.regions[1].base;
-}
-
-size_t __init_memblock memblock_size_of_REG1(void)
-{
-	return memblock.memory.regions[1].size;
-}
-
 static void __init csky_memblock_init(void)
 {
 	unsigned long zone_size[MAX_NR_ZONES];
-	unsigned long zhole_size[MAX_NR_ZONES];
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
@@ -57,54 +40,36 @@ static void __init csky_memblock_init(void)
 	memblock_dump_all();
 
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
-	max_pfn	    = PFN_DOWN(memblock_end_of_DRAM());
-
-	max_low_pfn = PFN_UP(memblock_end_of_REG0());
-	if (max_low_pfn == 0)
-		max_low_pfn = max_pfn;
+	max_low_pfn = max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 	size =