diff --git linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs linux-libre-5.15.45-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
index f627e705e663..48d41b669627 100644
--- linux-libre-5.15-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
+++ linux-libre-5.15.45-gnu/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -425,6 +425,7 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
+		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
diff --git linux-libre-5.15-gnu/Documentation/accounting/psi.rst linux-libre-5.15.45-gnu/Documentation/accounting/psi.rst
index f2b3439edcc2..860fe651d645 100644
--- linux-libre-5.15-gnu/Documentation/accounting/psi.rst
+++ linux-libre-5.15.45-gnu/Documentation/accounting/psi.rst
@@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst linux-libre-5.15.45-gnu/Documentation/admin-guide/cifs/usage.rst
index f170d8820258..3766bf8a1c20 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/cifs/usage.rst
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/cifs/usage.rst
@@ -734,10 +734,9 @@ SecurityFlags		Flags which control security negotiation and
 			using weaker password hashes is 0x37037 (lanman,
 			plaintext, ntlm, ntlmv2, signing allowed).  Some
 			SecurityFlags require the corresponding menuconfig
-			options to be enabled (lanman and plaintext require
-			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
-			plaintext authentication currently requires also
-			enabling lanman authentication in the security flags
+			options to be enabled.  Enabling plaintext
+			authentication currently requires also enabling
+			lanman authentication in the security flags
 			because the cifs module only supports sending
 			laintext passwords using the older lanman dialect
 			form of the session setup SMB.  (e.g. for authentication
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt linux-libre-5.15.45-gnu/Documentation/admin-guide/devices.txt
index 922c23bb4372..c07dc0ee860e 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/devices.txt
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/devices.txt
@@ -2339,13 +2339,7 @@
 		disks (see major number 3) except that the limit on
 		partitions is 31.
 
- 162 char	Raw block device interface
-		  0 = /dev/rawctl	Raw I/O control device
-		  1 = /dev/raw/raw1	First raw I/O device
-		  2 = /dev/raw/raw2	Second raw I/O device
-		    ...
-		 max minor number of raw device is set by kernel config
-		 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
+ 162 char	Used for (now removed) raw block device interface
 
  163 char
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.15.45-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..6bd97cd50d62 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -468,7 +483,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -584,12 +599,13 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   enhanced IBRS
+                eibrs,retpoline         enhanced IBRS + Retpolines
+                eibrs,lfence            enhanced IBRS + LFENCE
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +746,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.15.45-gnu/Documentation/admin-guide/kernel-parameters.txt
index 43dc35fe5bc0..fd3d14dabadc 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -1690,6 +1690,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2403,8 +2405,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -3446,8 +3452,7 @@
 			difficult since unequal pointers can no longer be
 			compared.  However, if this command-line option is
 			specified, then all normal pointers will have their true
-			value printed.  Pointers printed via %pK may still be
-			hashed.  This option should only be specified when
+			value printed. This option should only be specified when
 			debugging the kernel.  Please do not use on production
 			kernels.
 
@@ -4302,6 +4307,12 @@
 			fully seed the kernel's CRNG. Default is controlled
 			by CONFIG_RANDOM_TRUST_CPU.
 
+	random.trust_bootloader={on,off}
+			[KNL] Enable or disable trusting the use of a
+			seed passed by the bootloader (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_BOOTLOADER.
+
 	randomize_kstack_offset=
 			[KNL] Enable or disable kernel stack offset
 			randomization, which provides roughly 5 bits of
@@ -5261,8 +5272,12 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - enhanced IBRS
+			eibrs,retpoline   - enhanced IBRS + Retpolines
+			eibrs,lfence      - enhanced IBRS + LFENCE
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -6349,6 +6364,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst linux-libre-5.15.45-gnu/Documentation/admin-guide/mm/pagemap.rst
index fb578fbbb76c..49857ce1cd03 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/mm/pagemap.rst
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/mm/pagemap.rst
@@ -23,7 +23,7 @@ There are four components to pagemap:
     * Bit  56    page exclusively mapped (since 4.2)
     * Bit  57    pte is uffd-wp write-protected (since 5.13) (see
       :ref:`Documentation/admin-guide/mm/userfaultfd.rst <userfaultfd>`)
-    * Bits 57-60 zero
+    * Bits 58-60 zero
     * Bit  61    page is file-page or shared-anon (since 3.5)
     * Bit  62    page swapped
     * Bit  63    page present
diff --git linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.15.45-gnu/Documentation/admin-guide/sysctl/kernel.rst
index 426162009ce9..609b89175408 100644
--- linux-libre-5.15-gnu/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.15.45-gnu/Documentation/admin-guide/sysctl/kernel.rst
@@ -795,6 +795,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -1013,28 +1014,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1099,7 +1094,7 @@ task_delayacct
 ===============
 
 Enables/disables task delay accounting (see
-:doc:`accounting/delay-accounting.rst`). Enabling this feature incurs
+Documentation/accounting/delay-accounting.rst. Enabling this feature incurs
 a small amount of overhead in the scheduler but is useful for debugging
 and performance tuning. It is required by some tools such as iotop.
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.15.45-gnu/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..749ae970c319 100644
--- linux-libre-5.15-gnu/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.15.45-gnu/Documentation/arm64/cpu-feature-registers.rst
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,23 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst linux-libre-5.15.45-gnu/Documentation/arm64/elf_hwcaps.rst
index ec1a5a63c1d0..b72ff17d600a 100644
--- linux-libre-5.15-gnu/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.15.45-gnu/Documentation/arm64/elf_hwcaps.rst
@@ -247,6 +247,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst linux-libre-5.15.45-gnu/Documentation/arm64/silicon-errata.rst
index d410a47ffa57..7c1750bcc5bd 100644
--- linux-libre-5.15-gnu/Documentation/arm64/silicon-errata.rst
+++ linux-libre-5.15.45-gnu/Documentation/arm64/silicon-errata.rst
@@ -163,6 +163,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst linux-libre-5.15.45-gnu/Documentation/dev-tools/kfence.rst
index 0fbe3308bf37..48244d32780f 100644
--- linux-libre-5.15-gnu/Documentation/dev-tools/kfence.rst
+++ linux-libre-5.15.45-gnu/Documentation/dev-tools/kfence.rst
@@ -231,10 +231,14 @@ Guarded allocations are set up based on the sample interval. After expiration
 of the sample interval, the next allocation through the main allocator (SLAB or
 SLUB) returns a guarded allocation from the KFENCE object pool (allocation
 sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and
-the next allocation is set up after the expiration of the interval. To "gate" a
-KFENCE allocation through the main allocator's fast-path without overhead,
-KFENCE relies on static branches via the static keys infrastructure. The static
-branch is toggled to redirect the allocation to KFENCE.
+the next allocation is set up after the expiration of the interval.
+
+When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated"
+through the main allocator's fast-path by relying on static branches via the
+static keys infrastructure. The static branch is toggled to redirect the
+allocation to KFENCE. Depending on sample interval, target workloads, and
+system architecture, this may perform better than the simple dynamic branch.
+Careful benchmarking is recommended.
 
 KFENCE objects each reside on a dedicated page, at either the left or right
 page boundaries selected at random. The pages to the left and right of the
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..343598c9f473 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..047fd69e0377 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index d5c54813ce87..a8f7720d1e3e 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -54,7 +54,7 @@ examples:
 
           ad5766@0 {
               compatible = "adi,ad5766";
-              output-range-microvolts = <(-5000) 5000>;
+              output-range-microvolts = <(-5000000) 5000000>;
               reg = <0>;
               spi-cpol;
               spi-max-frequency = <1000000>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..34c43d3bddfd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 877183cf4278..1ef849dc74d7 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2353f6cf3c80..750720e0123a 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -106,7 +106,6 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
 
     then:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..5cd144a9ec99 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,7 +55,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-engine:
         allOf:
@@ -184,7 +184,7 @@ examples:
         nand-use-soft-ecc-engine;
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..ee42328a109d 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b8a0b392b24e..c52ec1ee7df6 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -106,6 +106,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -221,6 +225,8 @@ examples:
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c115c95ee584..5b8db76b6cdd 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -53,20 +53,18 @@ properties:
         - allwinner,sun8i-r40-emac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad2866c99738..fcd82df3aebb 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 4fe35e650909..8dcdd32c2e01 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -138,7 +138,7 @@ examples:
       clocks = <&sys_clk>;
       pinctrl-0 = <&sgpio2_pins>;
       pinctrl-names = "default";
-      reg = <0x1101059c 0x100>;
+      reg = <0x1101059c 0x118>;
       microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
       bus-frequency = <25000000>;
       sgpio_in2: gpio@0 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 35a8045b2c70..53627c6e2ae3 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -106,7 +106,7 @@ examples:
             dma-names = "rx", "tx";
 
             flash@0 {
-                    compatible = "spi-nor";
+                    compatible = "jedec,spi-nor";
                     reg = <0>;
                     spi-max-frequency = <104000000>;
                     spi-tx-bus-width = <2>;
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index a07de5ed0ca6..2d34f3ccb257 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 56853c17af66..1dc3d5d7b44f 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
diff --git linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.15-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.15.45-gnu/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.15.45-gnu/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.15.45-gnu/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst linux-libre-5.15.45-gnu/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.15-gnu/Documentation/driver-api/firewire.rst
+++ linux-libre-5.15.45-gnu/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst linux-libre-5.15.45-gnu/Documentation/filesystems/ext4/attributes.rst
index 54386a010a8d..871d2da7a0a9 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/ext4/attributes.rst
+++ linux-libre-5.15.45-gnu/Documentation/filesystems/ext4/attributes.rst
@@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
      - Checksum of the extended attribute block.
    * - 0x14
      - \_\_u32
-     - h\_reserved[2]
+     - h\_reserved[3]
      - Zero.
 
 The checksum is calculated against the FS UUID, the 64-bit block number
diff --git linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst linux-libre-5.15.45-gnu/Documentation/filesystems/fscrypt.rst
index 0eb799d9d05a..7940a45d3952 100644
--- linux-libre-5.15-gnu/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.15.45-gnu/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.15.45-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index b7ad47df49de..8b65b32e6e40 100644
--- linux-libre-5.15-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.15.45-gnu/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.15-gnu/Documentation/gpu/i915.rst linux-libre-5.15.45-gnu/Documentation/gpu/i915.rst
index 204ebdaadb45..03021dfa0dd8 100644
--- linux-libre-5.15-gnu/Documentation/gpu/i915.rst
+++ linux-libre-5.15.45-gnu/Documentation/gpu/i915.rst
@@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
 Display Refresh Rate Switching (DRRS)
 -------------------------------------
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :doc: Display Refresh Rate Switching (DRRS)
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_set_drrs_state
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_enable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_disable
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_invalidate
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_edp_drrs_flush
 
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
    :functions: intel_dp_drrs_init
 
 DPIO
diff --git linux-libre-5.15-gnu/Documentation/gpu/todo.rst linux-libre-5.15.45-gnu/Documentation/gpu/todo.rst
index 12e61869939e..67de1e94fdf7 100644
--- linux-libre-5.15-gnu/Documentation/gpu/todo.rst
+++ linux-libre-5.15.45-gnu/Documentation/gpu/todo.rst
@@ -311,27 +311,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
-SCROLL_REDRAW. There's a ton of code this will allow us to remove:
-
-- lots of code in fbcon.c
-
-- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
-  directly instead of the function table (with a switch on p->rotate)
-
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
diff --git linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst linux-libre-5.15.45-gnu/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.15-gnu/Documentation/hwmon/lm90.rst
+++ linux-libre-5.15.45-gnu/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.15-gnu/Documentation/locking/locktypes.rst linux-libre-5.15.45-gnu/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.15-gnu/Documentation/locking/locktypes.rst
+++ linux-libre-5.15.45-gnu/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.15-gnu/Documentation/networking/bonding.rst linux-libre-5.15.45-gnu/Documentation/networking/bonding.rst
index 31cfd7d674a6..c0a789b00806 100644
--- linux-libre-5.15-gnu/Documentation/networking/bonding.rst
+++ linux-libre-5.15.45-gnu/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.15.45-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.15-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.15.45-gnu/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst linux-libre-5.15.45-gnu/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.15-gnu/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.15.45-gnu/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst linux-libre-5.15.45-gnu/Documentation/process/stable-kernel-rules.rst
index 003c865e9c21..fbcb48bc2a90 100644
--- linux-libre-5.15-gnu/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.15.45-gnu/Documentation/process/stable-kernel-rules.rst
@@ -168,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee
diff --git linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst linux-libre-5.15.45-gnu/Documentation/process/submitting-patches.rst
index 8ad6b93f91e6..025272139539 100644
--- linux-libre-5.15-gnu/Documentation/process/submitting-patches.rst
+++ linux-libre-5.15.45-gnu/Documentation/process/submitting-patches.rst
@@ -72,7 +72,7 @@ as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
-system, ``git``, as a "commit log".  See :ref:`explicit_in_reply_to`.
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
 
 Solve only one problem per patch.  If your description starts to get
 long, that's a sign that you probably need to split up your patch.
diff --git linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst linux-libre-5.15.45-gnu/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..9b52f50a6854 100644
--- linux-libre-5.15-gnu/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.15.45-gnu/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
@@ -326,6 +330,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
diff --git linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt linux-libre-5.15.45-gnu/Documentation/sphinx/requirements.txt
index 9a35f50798a6..2c573541ab71 100644
--- linux-libre-5.15-gnu/Documentation/sphinx/requirements.txt
+++ linux-libre-5.15.45-gnu/Documentation/sphinx/requirements.txt
@@ -1,2 +1,4 @@
+# jinja2>=3.1 is not compatible with Sphinx<4.0
+jinja2<3.1
 sphinx_rtd_theme
 Sphinx==2.4.4
diff --git linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst linux-libre-5.15.45-gnu/Documentation/trace/coresight/coresight-config.rst
index a4e3ef295240..6ed13398ca2c 100644
--- linux-libre-5.15-gnu/Documentation/trace/coresight/coresight-config.rst
+++ linux-libre-5.15.45-gnu/Documentation/trace/coresight/coresight-config.rst
@@ -211,19 +211,13 @@ also declared in the perf 'cs_etm' event infrastructure so that they can
 be selected when running trace under perf::
 
     $ ls /sys/devices/cs_etm
-    configurations  format  perf_event_mux_interval_ms  sinks  type
-    events  nr_addr_filters  power
+    cpu0  cpu2  events  nr_addr_filters		power  subsystem  uevent
+    cpu1  cpu3  format  perf_event_mux_interval_ms	sinks  type
 
-Key directories here are 'configurations' - which lists the loaded
-configurations, and 'events' - a generic perf directory which allows
-selection on the perf command line.::
+The key directory here is 'events' - a generic perf directory which allows
+selection on the perf command line. As with the sinks entries, this provides
+a hash of the configuration name.
 
-    $ ls configurations/
-    autofdo
-    $ cat configurations/autofdo
-    0xa7c3dddd
-
-As with the sinks entries, this provides a hash of the configuration name.
 The entry in the 'events' directory uses perfs built in syntax generator
 to substitute the syntax for the name when evaluating the command::
 
diff --git linux-libre-5.15-gnu/Documentation/trace/events.rst linux-libre-5.15.45-gnu/Documentation/trace/events.rst
index 8ddb9b09451c..c47f381d0c00 100644
--- linux-libre-5.15-gnu/Documentation/trace/events.rst
+++ linux-libre-5.15.45-gnu/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.15-gnu/MAINTAINERS linux-libre-5.15.45-gnu/MAINTAINERS
index 3b79fd441dde..942e0b173f2c 100644
--- linux-libre-5.15-gnu/MAINTAINERS
+++ linux-libre-5.15.45-gnu/MAINTAINERS
@@ -7024,7 +7024,6 @@ F:	drivers/net/mdio/fwnode_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/
-F:	drivers/of/of_net.c
 F:	include/dt-bindings/net/qca-ar803x.h
 F:	include/linux/*mdio*.h
 F:	include/linux/mdio/*.h
@@ -7036,6 +7035,7 @@ F:	include/linux/platform_data/mdio-gpio.h
 F:	include/trace/events/mdio.h
 F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
+F:	net/core/of_net.c
 
 EXFAT FILE SYSTEM
 M:	Namjae Jeon <linkinjeon@kernel.org>
@@ -15720,6 +15720,8 @@ F:	arch/mips/generic/board-ranchu.c
 
 RANDOM NUMBER DRIVER
 M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/crng/random.git
 S:	Maintained
 F:	drivers/char/random.c
 
diff --git linux-libre-5.15-gnu/Makefile linux-libre-5.15.45-gnu/Makefile
index c0031dc001a7..11b2782216e8 100644
--- linux-libre-5.15-gnu/Makefile
+++ linux-libre-5.15.45-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 0
+SUBLEVEL = 45
 EXTRAVERSION = -gnu
 NAME = Trick or Treat
 
diff --git linux-libre-5.15-gnu/arch/Kconfig linux-libre-5.15.45-gnu/arch/Kconfig
index 8df1c7102643..191589f26b1a 100644
--- linux-libre-5.15-gnu/arch/Kconfig
+++ linux-libre-5.15.45-gnu/arch/Kconfig
@@ -1141,6 +1141,7 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 config RANDOMIZE_KSTACK_OFFSET_DEFAULT
 	bool "Randomize kernel stack offset on syscall entry"
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1234,6 +1235,9 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
        bool
        help
diff --git linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h linux-libre-5.15.45-gnu/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- linux-libre-5.15-gnu/arch/alpha/include/asm/timex.h
+++ linux-libre-5.15.45-gnu/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c linux-libre-5.15.45-gnu/arch/alpha/kernel/rtc.c
index ce3077946e1d..fb3025396ac9 100644
--- linux-libre-5.15-gnu/arch/alpha/kernel/rtc.c
+++ linux-libre-5.15.45-gnu/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
diff --git linux-libre-5.15-gnu/arch/arc/kernel/entry.S linux-libre-5.15.45-gnu/arch/arc/kernel/entry.S
index dd77a0c8f740..66ba549b520f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/entry.S
+++ linux-libre-5.15.45-gnu/arch/arc/kernel/entry.S
@@ -196,6 +196,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
diff --git linux-libre-5.15-gnu/arch/arc/kernel/process.c linux-libre-5.15.45-gnu/arch/arc/kernel/process.c
index 3793876f42d9..5f7f5aab361f 100644
--- linux-libre-5.15-gnu/arch/arc/kernel/process.c
+++ linux-libre-5.15.45-gnu/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
@@ -294,7 +294,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig linux-libre-5.15.45-gnu/arch/arm/Kconfig
index dcf2df6da98f..4ebd512043be 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/Kconfig
@@ -1455,6 +1455,7 @@ config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
diff --git linux-libre-5.15-gnu/arch/arm/Kconfig.debug linux-libre-5.15.45-gnu/arch/arm/Kconfig.debug
index 98436702e0c7..644875d73ba1 100644
--- linux-libre-5.15-gnu/arch/arm/Kconfig.debug
+++ linux-libre-5.15.45-gnu/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git linux-libre-5.15-gnu/arch/arm/Makefile linux-libre-5.15.45-gnu/arch/arm/Makefile
index 847c31e7c368..fa45837b8065 100644
--- linux-libre-5.15-gnu/arch/arm/Makefile
+++ linux-libre-5.15.45-gnu/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S linux-libre-5.15.45-gnu/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.15.45-gnu/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S linux-libre-5.15.45-gnu/arch/arm/boot/compressed/head.S
index b1cb1972361b..bf79f2f78d23 100644
--- linux-libre-5.15-gnu/arch/arm/boot/compressed/head.S
+++ linux-libre-5.15.45-gnu/arch/arm/boot/compressed/head.S
@@ -203,7 +203,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile linux-libre-5.15.45-gnu/arch/arm/boot/dts/Makefile
index 7e0934180724..27ca1ca6e827 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/Makefile
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/Makefile
@@ -779,6 +779,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..c8b80f156ec9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-evm.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/am3517-som.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..df3c8d1d8f64 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 2efd70666738..af7ea7cab8cf 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -231,6 +231,21 @@
 			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &gpio0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6419c9762c0b..6c9f34396a3a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -246,6 +246,21 @@
 			linux,code = <11>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &ehci1 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..ac07c240419a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
@@ -653,12 +648,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e5724b1a2e20 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -364,6 +364,41 @@
 				status = "disabled";
 			};
 
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d72c042f2850..a49c2966b41e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index d241c24f0d83..e519d2747936 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
index f3d6aaa3a78d..bac0e49cc577 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -403,7 +403,7 @@
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..ca03685f0f08 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -219,6 +219,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
index 748df7955ae6..e96ddb2e26e2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm2711.dtsi
index 3b60297af7f6..89af57482bc8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -458,12 +459,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +487,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +502,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +517,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -506,11 +557,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -576,6 +633,8 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
+	gpio-ranges = <&gpio 0 0 58>;
+
 	gpclk0_gpio49: gpclk0_gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm2837.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm283x.dtsi
index a3e06b680947..c113661a6668 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 61c7b137607e..7900aac4f35a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,7 +20,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 6c6bb7b17d27..7546c8d07bcd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index d29e7f80ea6a..beae9eab9cb8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 9b6887d477d8..7879f7d7d9c3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 7989a53597d4..56d309dbc6b0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 87b655be674c..184e3039aa86 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,7 +30,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..c2a266a439d0 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 05d4f2931772..9bef6b9bfa8d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -129,7 +129,7 @@
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 452b8d0ab180..b0d8a688141d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,7 +16,7 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..577a4dc604d9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -195,3 +195,25 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm5301x.dtsi
index f92089290ccd..f69d2af3c1fa 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA@18000000 {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
@@ -44,7 +44,7 @@
 		};
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -369,8 +371,8 @@
 		#address-cells = <1>;
 	};
 
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -408,14 +410,14 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	dmu@1800c000 {
+	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;
 		#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94708.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/bcm94709.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..5733e3a4ea8e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3511,7 +3510,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4189,11 +4188,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/dra7.dtsi
index dfc1ef8ef6ae..61a3fb3e2a2f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/dra7.dtsi
@@ -1320,20 +1320,20 @@
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index 55922176807e..5f5d9b135736 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -827,7 +827,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..d7d756614edd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..f042954bdfa5 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..07f65213aae6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
index 13112a8a5dd8..6544c730340f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..a696873dc1ab 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -516,8 +518,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -810,6 +810,12 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index b62a0dbb033f..ec6fba5ee8fd 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -309,6 +309,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 0cdbf7b6e728..b6fc879e9dbe 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-colibri.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-mba7.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
index 5e6bef230dc7..b55a7792a839 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -264,7 +264,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-sdb.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-sdb.dts
index 4a0d83784d7d..e5f1bdbe7992 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7d-sdb.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7d-sdb.dts
@@ -385,14 +385,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s-warp.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7s-warp.dts
index 569bbd84e371..558b064da743 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7s-warp.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/imx7ulp.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/imx7ulp.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a-tsn.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..aca78b5eddf2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943..f3b8540750b6 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ls1021a.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/ls1021a.dtsi
@@ -329,39 +329,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -1016,4 +983,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5..26eaba3fa96f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson8.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2..9997a5d0333a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/meson8b.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4e..94f1c03decce 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..e7534fe9c53c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-beagle.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..6883ccb45600 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
index 938cc691bb2f..3923b38e798d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -515,7 +517,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-n900.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478..d40c3d2c4914 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
 		label = "rofs";
 	};
 
-	rwfs@6000000 {
+	rwfs@2a00000 {
 		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
index ff1bdb10ad19..08bc5f46649d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index f7ea2e5dd191..971d2e229260 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..c197927e7435 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +194,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -318,7 +320,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
index 78ec496d5bc3..2b01bc29ddf2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1589,8 +1589,8 @@
 				#phy-cells = <0>;
 				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1e6ce035f76a..b5b784c5c65e 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -334,12 +334,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
-					<&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
 					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
 					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory-a",
-					     "memory-b",
+			interconnect-names = "memory",
 					     "imem",
 					     "config";
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk322x.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/rk322x.dtsi
index 75af99c76d7e..f31cf1df892b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk322x.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/rk322x.dtsi
@@ -718,8 +718,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/rk3288.dtsi
index 4dcdcf17c977..66ff5db53c5a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/rk3288.dtsi
@@ -971,7 +971,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..2f57100a011a 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -895,7 +895,7 @@
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gph2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama5d2.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama5d2.dtsi
index 801969c113d6..de88eb484718 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama5d2.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama5d2.dtsi
@@ -413,7 +413,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
index 22fe9e522a97..4eb30445d205 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -765,7 +765,7 @@
 #define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
 #define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
 #define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
-#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
 #define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
 #define PIN_PD21			117
 #define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama7g5.dtsi
index 6c58c151c6d9..ac84d2e37f9b 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sama7g5.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sama7g5.dtsi
@@ -319,8 +319,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
 					<&dma0 AT91_XDMAC_DT_PERID(8)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -485,8 +483,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
 					<&dma0 AT91_XDMAC_DT_PERID(22)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -511,8 +507,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
 					<&dma0 AT91_XDMAC_DT_PERID(24)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga.dtsi
index 0b021eef0b53..7c1d6423d7f8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga.dtsi
@@ -782,7 +782,7 @@
 		};
 
 		qspi: spi@ff705000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
index a574ea91d9d3..3ba431dfa8c9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -756,7 +756,7 @@
 		};
 
 		qspi: spi@ff809000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff809000 0x100>,
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index 2b645642b935..2a745522404d 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -12,7 +12,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f..1b02d46496a8 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..51bb436784e2 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -124,7 +124,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..cae9ddd5ed38 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -169,7 +169,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..3f7aa7bf0863 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -116,7 +116,7 @@
 	flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..25874e1b9c82 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -224,7 +224,7 @@
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -241,7 +241,7 @@
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear1340.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/spear1340.dtsi
index 1a8f5e8b10e3..66cd473ecb61 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear1340.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/spear1340.dtsi
@@ -136,9 +136,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
-					<&dwdma0 13 1 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/spear13xx.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/spear13xx.dtsi
index c87b881b2c8b..913553367687 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/spear13xx.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
-					<&dwdma0 5 0 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 264f3e9b5fce..7fab746e0570 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -181,10 +181,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -292,10 +288,10 @@
 					};
 
 					ab8500_ldo_aux2 {
-						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						/* Supplies the Cypress TMA140 touchscreen only with 3.0V */
 						regulator-name = "AUX2";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
 					};
 
 					ab8500_ldo_aux3 {
@@ -314,9 +310,9 @@
 
 					ab8500_ldo_aux5 {
 						regulator-name = "AUX5";
+						/* Intended for 1V8 for touchscreen but actually left unused */
 						regulator-min-microvolt = <1050000>;
 						regulator-max-microvolt = <2790000>;
-						regulator-always-on;
 					};
 
 					ab8500_ldo_aux6 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f429-disco.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32f429-disco.dts
index 075ac57d0bf4..6435e099c632 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32f429-disco.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32f429-disco.dts
@@ -192,7 +192,7 @@
 
 	display: display@1{
 		/* Connect panel-ilitek-9341 to ltdc */
-		compatible = "st,sf-tc240t-9370-t";
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
 		spi-3wire;
 		spi-max-frequency = <10000000>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 5b60ecbd718f..2ebafe27a865 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1179,7 +1179,7 @@
 		};
 	};
 
-	sai2a_pins_c: sai2a-4 {
+	sai2a_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-5 {
+	sai2a_sleep_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@
 		};
 	};
 
-	sai2b_pins_c: sai2a-4 {
+	sai2b_pins_c: sai2b-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_c: sai2a-sleep-5 {
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp151.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp151.dtsi
index bd289bf5d269..6992a4b0ba79 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp151.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp151.dtsi
@@ -824,7 +824,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -834,7 +834,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -855,7 +855,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -865,7 +865,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -886,7 +886,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -896,7 +896,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1271,7 +1271,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1281,7 +1281,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 2b0ac605549d..44ecc4708587 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -202,7 +202,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
+		spi-max-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 899bfe04aeb9..48beed0f1f30 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -249,7 +249,7 @@
 	stusb1600@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpioi>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&stusb1600_pins_a>;
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a33.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
index 2beddbb3c518..b3d1bdfb5118 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
index ac97eac91349..82fdb04122ca 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -200,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -253,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
index 4e89701df91f..ae4f933abb89 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -44,7 +44,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -112,7 +112,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-120000000 {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..084323d5c61c 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -593,6 +593,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -604,16 +615,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-venice2.dts linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-venice2.dts
index e6b54ac1ebd1..84e2d24065e9 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra124-venice2.dts
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1079,13 +1086,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
diff --git linux-libre-5.15-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
index dd4d506683de..7f14f0d005c3 100644
--- linux-libre-5.15-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git linux-libre-5.15-gnu/arch/arm/configs/cm_x300_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/cm_x300_defconfig
index 502a9d870ca4..45769d0ddd4e 100644
--- linux-libre-5.15-gnu/arch/arm/configs/cm_x300_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/cm_x300_defconfig
@@ -146,7 +146,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/ezx_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/ezx_defconfig
index a49e699e52de..ec84d80096b1 100644
--- linux-libre-5.15-gnu/arch/arm/configs/ezx_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/ezx_defconfig
@@ -314,7 +314,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/imote2_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/imote2_defconfig
index 118c4c927f26..6db871d4e077 100644
--- linux-libre-5.15-gnu/arch/arm/configs/imote2_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/imote2_defconfig
@@ -288,7 +288,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git linux-libre-5.15-gnu/arch/arm/configs/multi_v5_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/multi_v5_defconfig
index 80a3ae02d759..e883cb6dc645 100644
--- linux-libre-5.15-gnu/arch/arm/configs/multi_v5_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/multi_v5_defconfig
@@ -188,6 +188,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m
@@ -195,6 +196,7 @@ CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/nhk8815_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/nhk8815_defconfig
index 23595fc5a29a..907d6512821a 100644
--- linux-libre-5.15-gnu/arch/arm/configs/nhk8815_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/nhk8815_defconfig
@@ -127,7 +127,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/pxa_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/pxa_defconfig
index 58f4834289e6..dedaaae3d0d8 100644
--- linux-libre-5.15-gnu/arch/arm/configs/pxa_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/pxa_defconfig
@@ -699,7 +699,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_DEFAULT="utf8"
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear13xx_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/spear13xx_defconfig
index 3b206a31902f..065553326b39 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear13xx_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/spear13xx_defconfig
@@ -61,7 +61,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear3xx_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/spear3xx_defconfig
index fc5f71c765ed..afca722d6605 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear3xx_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/spear3xx_defconfig
@@ -41,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/configs/spear6xx_defconfig linux-libre-5.15.45-gnu/arch/arm/configs/spear6xx_defconfig
index 52a56b8ce6a7..bc32c02cb86b 100644
--- linux-libre-5.15-gnu/arch/arm/configs/spear6xx_defconfig
+++ linux-libre-5.15.45-gnu/arch/arm/configs/spear6xx_defconfig
@@ -36,7 +36,6 @@ CONFIG_INPUT_FF_MEMLESS=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
diff --git linux-libre-5.15-gnu/arch/arm/crypto/Kconfig linux-libre-5.15.45-gnu/arch/arm/crypto/Kconfig
index 2b575792363e..e4dba5461cb3 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/crypto/Kconfig
@@ -102,6 +102,8 @@ config CRYPTO_AES_ARM_BS
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
+	select CRYPTO_AES
+	select CRYPTO_CBC
 	select CRYPTO_SIMD
 	help
 	  Use a faster and more secure NEON based implementation of AES in CBC,
diff --git linux-libre-5.15-gnu/arch/arm/crypto/Makefile linux-libre-5.15.45-gnu/arch/arm/crypto/Makefile
index eafa898ba6a7..0274f81cc8ea 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/Makefile
+++ linux-libre-5.15.45-gnu/arch/arm/crypto/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
 obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
+obj-$(if $(CONFIG_CRYPTO_BLAKE2S_ARM),y) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
@@ -31,7 +32,8 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
 sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
 sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
 sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-blake2s-arm-y   := blake2s-core.o blake2s-glue.o
+blake2s-arm-y   := blake2s-shash.o
+libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
 sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
diff --git linux-libre-5.15-gnu/arch/arm/crypto/blake2s-core.S linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-core.S
index 86345751bbf3..df40e46601f1 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/blake2s-core.S
+++ linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-core.S
@@ -167,8 +167,8 @@
 .endm
 
 //
-// void blake2s_compress_arch(struct blake2s_state *state,
-//			      const u8 *block, size_t nblocks, u32 inc);
+// void blake2s_compress(struct blake2s_state *state,
+//			 const u8 *block, size_t nblocks, u32 inc);
 //
 // Only the first three fields of struct blake2s_state are used:
 //	u32 h[8];	(inout)
@@ -176,7 +176,7 @@
 //	u32 f[2];	(in)
 //
 	.align		5
-ENTRY(blake2s_compress_arch)
+ENTRY(blake2s_compress)
 	push		{r0-r2,r4-r11,lr}	// keep this an even number
 
 .Lnext_block:
@@ -303,4 +303,4 @@ ENTRY(blake2s_compress_arch)
 	str		r3, [r12], #4
 	bne		1b
 	b		.Lcopy_block_done
-ENDPROC(blake2s_compress_arch)
+ENDPROC(blake2s_compress)
diff --git linux-libre-5.15-gnu/arch/arm/crypto/blake2s-glue.c linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-glue.c
index f2cc1e5fc9ec..0238a70d9581 100644
--- linux-libre-5.15-gnu/arch/arm/crypto/blake2s-glue.c
+++ linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-glue.c
@@ -1,78 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- */
 
 #include <crypto/internal/blake2s.h>
-#include <crypto/internal/hash.h>
-
 #include <linux/module.h>
 
 /* defined in blake2s-core.S */
-EXPORT_SYMBOL(blake2s_compress_arch);
-
-static int crypto_blake2s_update_arm(struct shash_desc *desc,
-				     const u8 *in, unsigned int inlen)
-{
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress_arch);
-}
-
-static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
-{
-	return crypto_blake2s_final(desc, out, blake2s_compress_arch);
-}
-
-#define BLAKE2S_ALG(name, driver_name, digest_size)			\
-	{								\
-		.base.cra_name		= name,				\
-		.base.cra_driver_name	= driver_name,			\
-		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
-		.base.cra_blocksize	= BLAKE2S_BLOCK_SIZE,		\
-		.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx), \
-		.base.cra_module	= THIS_MODULE,			\
-		.digestsize		= digest_size,			\
-		.setkey			= crypto_blake2s_setkey,	\
-		.init			= crypto_blake2s_init,		\
-		.update			= crypto_blake2s_update_arm,	\
-		.final			= crypto_blake2s_final_arm,	\
-		.descsize		= sizeof(struct blake2s_state),	\
-	}
-
-static struct shash_alg blake2s_arm_algs[] = {
-	BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
-};
-
-static int __init blake2s_arm_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(blake2s_arm_algs,
-					ARRAY_SIZE(blake2s_arm_algs)) : 0;
-}
-
-static void __exit blake2s_arm_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shashes(blake2s_arm_algs,
-					  ARRAY_SIZE(blake2s_arm_algs));
-}
-
-module_init(blake2s_arm_mod_init);
-module_exit(blake2s_arm_mod_exit);
-
-MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("blake2s-128");
-MODULE_ALIAS_CRYPTO("blake2s-128-arm");
-MODULE_ALIAS_CRYPTO("blake2s-160");
-MODULE_ALIAS_CRYPTO("blake2s-160-arm");
-MODULE_ALIAS_CRYPTO("blake2s-224");
-MODULE_ALIAS_CRYPTO("blake2s-224-arm");
-MODULE_ALIAS_CRYPTO("blake2s-256");
-MODULE_ALIAS_CRYPTO("blake2s-256-arm");
+EXPORT_SYMBOL(blake2s_compress);
diff --git linux-libre-5.15-gnu/arch/arm/crypto/blake2s-shash.c linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-shash.c
new file mode 100644
index 000000000000..763c73beea2d
--- /dev/null
+++ linux-libre-5.15.45-gnu/arch/arm/crypto/blake2s-shash.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BLAKE2s digest algorithm, ARM scalar implementation
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <crypto/internal/blake2s.h>
+#include <crypto/internal/hash.h>
+
+#include <linux/module.h>
+
+static int crypto_blake2s_update_arm(struct shash_desc *desc,
+				     const u8 *in, unsigned int inlen)
+{
+	return crypto_blake2s_update(desc, in, inlen, false);
+}
+
+static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
+{
+	return crypto_blake2s_final(desc, out, false);
+}
+
+#define BLAKE2S_ALG(name, driver_name, digest_size)			\
+	{								\
+		.base.cra_name		= name,				\
+		.base.cra_driver_name	= driver_name,			\
+		.base.cra_priority	= 200,				\
+		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
+		.base.cra_blocksize	= BLAKE2S_BLOCK_SIZE,		\
+		.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx), \
+		.base.cra_module	= THIS_MODULE,			\
+		.digestsize		= digest_size,			\
+		.setkey			= crypto_blake2s_setkey,	\
+		.init			= crypto_blake2s_init,		\
+		.update			= crypto_blake2s_update_arm,	\
+		.final			= crypto_blake2s_final_arm,	\
+		.descsize		= sizeof(struct blake2s_state),	\
+	}
+
+static struct shash_alg blake2s_arm_algs[] = {
+	BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
+	BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
+	BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
+	BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
+};
+
+static int __init blake2s_arm_mod_init(void)
+{
+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
+		crypto_register_shashes(blake2s_arm_algs,
+					ARRAY_SIZE(blake2s_arm_algs)) : 0;
+}
+
+static void __exit blake2s_arm_mod_exit(void)
+{
+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
+		crypto_unregister_shashes(blake2s_arm_algs,
+					  ARRAY_SIZE(blake2s_arm_algs));
+}
+
+module_init(blake2s_arm_mod_init);
+module_exit(blake2s_arm_mod_exit);
+
+MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
+MODULE_ALIAS_CRYPTO("blake2s-128");
+MODULE_ALIAS_CRYPTO("blake2s-128-arm");
+MODULE_ALIAS_CRYPTO("blake2s-160");
+MODULE_ALIAS_CRYPTO("blake2s-160-arm");
+MODULE_ALIAS_CRYPTO("blake2s-224");
+MODULE_ALIAS_CRYPTO("blake2s-224-arm");
+MODULE_ALIAS_CRYPTO("blake2s-256");
+MODULE_ALIAS_CRYPTO("blake2s-256-arm");
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/assembler.h linux-libre-5.15.45-gnu/arch/arm/include/asm/assembler.h
index e2b1fd558bf3..09c241280ed9 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/assembler.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/assembler.h
@@ -107,6 +107,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -259,6 +269,7 @@
  */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 9997:	instr							;\
 	.if . - 9997b == 2					;\
@@ -270,6 +281,7 @@
 	.popsection
 #define ALT_UP_B(label)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 	W(b)	. + (label - 9998b)					;\
 	.popsection
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/efi.h linux-libre-5.15.45-gnu/arch/arm/include/asm/efi.h
index a6f3b179e8a9..27218eabbf9a 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/efi.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/efi.h
@@ -17,7 +17,6 @@
 
 #ifdef CONFIG_EFI
 void efi_init(void);
-extern void efifb_setup_from_dmi(struct screen_info *si, const char *opt);
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
 int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/io.h linux-libre-5.15.45-gnu/arch/arm/include/asm/io.h
index f74944c6fe8d..79d246ac93ab 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/io.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/io.h
@@ -436,6 +436,9 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
 #endif
 
 /*
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/processor.h linux-libre-5.15.45-gnu/arch/arm/include/asm/processor.h
index 9e6b97286307..8aeff55aebfa 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/processor.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/processor.h
@@ -96,6 +96,7 @@ unsigned long get_wchan(struct task_struct *p);
 #define __ALT_SMP_ASM(smp, up)						\
 	"9998:	" smp "\n"						\
 	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
+	"	.align	2\n"						\
 	"	.long	9998b - .\n"					\
 	"	" up "\n"						\
 	"	.popsection\n"
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/spectre.h linux-libre-5.15.45-gnu/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/timex.h linux-libre-5.15.45-gnu/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/timex.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/uaccess.h linux-libre-5.15.45-gnu/arch/arm/include/asm/uaccess.h
index 36fbc3329252..32dbfd81f42a 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/uaccess.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <asm/memory.h>
 #include <asm/domain.h>
+#include <asm/unaligned.h>
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
@@ -497,7 +498,10 @@ do {									\
 	}								\
 	default: __err = __get_user_bad(); break;			\
 	}								\
-	*(type *)(dst) = __val;						\
+	if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))		\
+		put_unaligned(__val, (type *)(dst));			\
+	else								\
+		*(type *)(dst) = __val; /* aligned by caller */		\
 	if (__err)							\
 		goto err_label;						\
 } while (0)
@@ -507,7 +511,9 @@ do {									\
 	const type *__pk_ptr = (dst);					\
 	unsigned long __dst = (unsigned long)__pk_ptr;			\
 	int __err = 0;							\
-	type __val = *(type *)src;					\
+	type __val = IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)	\
+		     ? get_unaligned((type *)(src))			\
+		     : *(type *)(src);	/* aligned by caller */		\
 	switch (sizeof(type)) {						\
 	case 1: __put_user_asm_byte(__val, __dst, __err, ""); break;	\
 	case 2:	__put_user_asm_half(__val, __dst, __err, ""); break;	\
diff --git linux-libre-5.15-gnu/arch/arm/include/asm/vmlinux.lds.h linux-libre-5.15.45-gnu/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..fad45c884e98 100644
--- linux-libre-5.15-gnu/arch/arm/include/asm/vmlinux.lds.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -110,19 +123,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git linux-libre-5.15-gnu/arch/arm/include/debug/imx-uart.h linux-libre-5.15.45-gnu/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- linux-libre-5.15-gnu/arch/arm/include/debug/imx-uart.h
+++ linux-libre-5.15.45-gnu/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
diff --git linux-libre-5.15-gnu/arch/arm/kernel/Makefile linux-libre-5.15.45-gnu/arch/arm/kernel/Makefile
index ae295a3bcfef..6ef3b535b7bf 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/Makefile
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/Makefile
@@ -106,4 +106,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-armv.S linux-libre-5.15.45-gnu/arch/arm/kernel/entry-armv.S
index 241b73d64df7..68261a83b7ad 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-armv.S
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/entry-armv.S
@@ -597,11 +597,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -610,7 +608,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
@@ -1002,12 +1000,11 @@ vector_\name:
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
+
+	@ Save spsr_<exception> (parent CPSR)
+2:	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
 	@
@@ -1028,6 +1025,44 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	W(b)	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb
+	isb
+	b	2b
+ENDPROC(vector_bhb_loop8_\name)
+
+vector_bhb_bpiall_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	2b
+ENDPROC(vector_bhb_bpiall_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
@@ -1036,6 +1071,10 @@ ENDPROC(vector_\name)
 	.section .stubs, "ax", %progbits
 	@ This must be the first word
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.word	vector_bhb_loop8_swi
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1150,8 +1189,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1184,6 +1225,30 @@ vector_addrexcptn:
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+.L__vectors_bhb_loop8_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+.L__vectors_bhb_bpiall_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-common.S linux-libre-5.15.45-gnu/arch/arm/kernel/entry-common.S
index d9c99db50243..fde7ac271b14 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-common.S
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/entry-common.S
@@ -153,6 +153,29 @@ ENDPROC(ret_from_fork)
  *-----------------------------------------------------------------------------
  */
 
+	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
 	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
@@ -160,6 +183,7 @@ ENTRY(vector_swi)
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
diff --git linux-libre-5.15-gnu/arch/arm/kernel/entry-ftrace.S linux-libre-5.15.45-gnu/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..5f1b1ce10473 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/entry-ftrace.S
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/entry-ftrace.S
@@ -22,10 +22,7 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
  * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
 	ldr r2, =function_trace_op
 	ldr r2, [r2]				@ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/kernel/head-nommu.S linux-libre-5.15.45-gnu/arch/arm/kernel/head-nommu.S
index 0fc814bbc34b..8796a69c78e0 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/head-nommu.S
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/head-nommu.S
@@ -114,6 +114,7 @@ ENTRY(secondary_startup)
 	add	r12, r12, r10
 	ret	r12
 1:	bl	__after_proc_init
+	ldr	r7, __secondary_data		@ reload r7
 	ldr	sp, [r7, #12]			@ set up the stack pointer
 	mov	fp, #0
 	b	secondary_start_kernel
diff --git linux-libre-5.15-gnu/arch/arm/kernel/kgdb.c linux-libre-5.15.45-gnu/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/kgdb.c
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/kernel/perf_callchain.c linux-libre-5.15.45-gnu/arch/arm/kernel/perf_callchain.c
index 3b69a76d341e..1626dfc6f6ce 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/perf_callchain.c
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/perf_callchain.c
@@ -62,9 +62,10 @@ user_backtrace(struct frame_tail __user *tail,
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct frame_tail __user *tail;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -98,9 +99,10 @@ callchain_trace(struct stackframe *fr,
 void
 perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe fr;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -111,18 +113,21 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest())
+		return guest_cbs->get_guest_ip();
 
 	return instruction_pointer(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
+	if (guest_cbs && guest_cbs->is_in_guest()) {
+		if (guest_cbs->is_user_mode())
 			misc |= PERF_RECORD_MISC_GUEST_USER;
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/spectre.c linux-libre-5.15.45-gnu/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git linux-libre-5.15-gnu/arch/arm/kernel/stacktrace.c linux-libre-5.15.45-gnu/arch/arm/kernel/stacktrace.c
index 76ea4178a55c..824774999825 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/stacktrace.c
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/stacktrace.c
@@ -53,18 +53,17 @@ int notrace unwind_frame(struct stackframe *frame)
 		return -EINVAL;
 
 	frame->sp = frame->fp;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = frame->lr;
-	frame->lr = *(unsigned long *)(fp + 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
 #else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
 #endif
 
 	return 0;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/swp_emulate.c linux-libre-5.15.45-gnu/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/swp_emulate.c
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;
diff --git linux-libre-5.15-gnu/arch/arm/kernel/traps.c linux-libre-5.15.45-gnu/arch/arm/kernel/traps.c
index 195dff58bafc..54abd8720dde 100644
--- linux-libre-5.15-gnu/arch/arm/kernel/traps.c
+++ linux-libre-5.15.45-gnu/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
@@ -574,7 +575,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);
@@ -787,10 +788,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state > SYSTEM_SCHEDULING) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -811,17 +861,20 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
-#endif
 }
+#endif
diff --git linux-libre-5.15-gnu/arch/arm/mach-davinci/board-da850-evm.c linux-libre-5.15.45-gnu/arch/arm/mach-davinci/board-da850-evm.c
index 428012687a80..7f7f6bae21c2 100644
--- linux-libre-5.15-gnu/arch/arm/mach-davinci/board-da850-evm.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-davinci/board-da850-evm.c
@@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
 	int ret;
 	u32 val;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+	u8 rmii_en;
 
 	if (!machine_is_davinci_da850_evm())
 		return 0;
 
+	rmii_en = soc_info->emac_pdata->rmii_en;
+
 	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 
 	val = __raw_readl(cfg_chip3_base);
diff --git linux-libre-5.15-gnu/arch/arm/mach-exynos/Kconfig linux-libre-5.15.45-gnu/arch/arm/mach-exynos/Kconfig
index 5a48abac6af4..4b554cc8fa58 100644
--- linux-libre-5.15-gnu/arch/arm/mach-exynos/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/mach-exynos/Kconfig
@@ -18,7 +18,6 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
index 8e6766d4621e..341e5d9a6616 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
 	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
 	cmp     \irqstat, #0
 	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
+	rsbne   \irqnr, \irqnr, #32
 	.endm
 
 	.macro arch_ret_to_user, tmp1, tmp2
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/irqs.h linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
index c4e78df428e8..e09ae5f48aec 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
+++ linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
 #ifndef __IRQS_H
 #define __IRQS_H
 
-#define NR_IRQS			32
+#define NR_IRQS			33
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/irq.c linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/irq.c
index 2d48bf1398c1..d1e8824cbd82 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/irq.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/irq.c
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
diff --git linux-libre-5.15-gnu/arch/arm/mach-iop32x/irqs.h linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/irqs.h
index 69858e4e905d..e1dfc8b4e7d7 100644
--- linux-libre-5.15-gnu/arch/arm/mach-iop32x/irqs.h
+++ linux-libre-5.15.45-gnu/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
 #endif
diff --git linux-libre-5.15-gnu/arch/arm/mach-mmp/sram.c linux-libre-5.15.45-gnu/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mmp/sram.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-mstar/Kconfig linux-libre-5.15.45-gnu/arch/arm/mach-mstar/Kconfig
index cd300eeedc20..0bf4d312bcfd 100644
--- linux-libre-5.15-gnu/arch/arm/mach-mstar/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/mach-mstar/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	select MSTAR_MSC313_MPLL
 	help
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/display.c linux-libre-5.15.45-gnu/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..21413a9b7b6c 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/display.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-5.15.45-gnu/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/omap4-common.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
diff --git linux-libre-5.15-gnu/arch/arm/mach-omap2/omap_hwmod.c linux-libre-5.15.45-gnu/arch/arm/mach-omap2/omap_hwmod.c
index 0c2936c7a379..a5e9cffcac10 100644
--- linux-libre-5.15-gnu/arch/arm/mach-omap2/omap_hwmod.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
diff --git linux-libre-5.15-gnu/arch/arm/mach-s3c/irq-s3c24xx.c linux-libre-5.15.45-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
index 3edc5f614eef..c1c2f041ad3b 100644
--- linux-libre-5.15-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -361,11 +361,25 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
 static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
 {
 	do {
-		if (likely(s3c_intc[0]))
-			if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-				continue;
+		/*
+		 * For platform based machines, neither ERR nor NULL can happen here.
+		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+		 *
+		 *    s3c_intc[0] = s3c24xx_init_intc()
+		 *
+		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+		 *
+		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+		 * such code path, so again the s3c_intc[0] will have a valid pointer if
+		 * set_handle_irq() is called.
+		 *
+		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+		 */
+		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+			continue;
 
-		if (s3c_intc[2])
+		if (!IS_ERR_OR_NULL(s3c_intc[2]))
 			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
 				continue;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-s3c/mach-jive.c linux-libre-5.15.45-gnu/arch/arm/mach-s3c/mach-jive.c
index 0785638a9069..7d15b84ae217 100644
--- linux-libre-5.15-gnu/arch/arm/mach-s3c/mach-jive.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-s3c/mach-jive.c
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *options)
 	unsigned long set;
 
 	if (options == NULL || options[0] == '\0')
-		return 0;
+		return 1;
 
 	if (kstrtoul(options, 10, &set)) {
 		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
+		return 1;
 	}
 
 	switch (set) {
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *options)
 		       "using default.", set);
 	}
 
-	return 0;
+	return 1;
 }
 
 /* parse the mtdset= option given to the kernel command line */
diff --git linux-libre-5.15-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c linux-libre-5.15.45-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3..09ef73b99dd8 100644
--- linux-libre-5.15-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/Kconfig linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/Kconfig
index 43ddec677c0b..594edf9bbea4 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/core.h linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/core.h
index fc2608b18a0d..18f01190dcfd 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/core.h
+++ linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/core.h
@@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 
diff --git linux-libre-5.15-gnu/arch/arm/mach-socfpga/platsmp.c linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/platsmp.c
index fbb80b883e5d..201191cf68f3 100644
--- linux-libre-5.15-gnu/arch/arm/mach-socfpga/platsmp.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-socfpga/platsmp.c
@@ -20,14 +20,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
diff --git linux-libre-5.15-gnu/arch/arm/mach-vexpress/spc.c linux-libre-5.15.45-gnu/arch/arm/mach-vexpress/spc.c
index 1da11bdb1dfb..1c6500c4e6a1 100644
--- linux-libre-5.15-gnu/arch/arm/mach-vexpress/spc.c
+++ linux-libre-5.15.45-gnu/arch/arm/mach-vexpress/spc.c
@@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
diff --git linux-libre-5.15-gnu/arch/arm/mm/Kconfig linux-libre-5.15.45-gnu/arch/arm/mm/Kconfig
index 8355c3895894..f43cdc1cfbae 100644
--- linux-libre-5.15-gnu/arch/arm/mm/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm/mm/Kconfig
@@ -750,7 +750,7 @@ config CPU_BIG_ENDIAN
 config CPU_ENDIAN_BE8
 	bool
 	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
+	default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
 	help
 	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
 
@@ -830,6 +830,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -850,6 +851,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
diff --git linux-libre-5.15-gnu/arch/arm/mm/ioremap.c linux-libre-5.15.45-gnu/arch/arm/mm/ioremap.c
index 80fb5a4a5c05..2660bdfcad4d 100644
--- linux-libre-5.15-gnu/arch/arm/mm/ioremap.c
+++ linux-libre-5.15.45-gnu/arch/arm/mm/ioremap.c
@@ -479,3 +479,11 @@ void __init early_ioremap_init(void)
 {
 	early_ioremap_setup();
 }
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return memblock_is_map_memory(pfn);
+}
diff --git linux-libre-5.15-gnu/arch/arm/mm/kasan_init.c linux-libre-5.15.45-gnu/arch/arm/mm/kasan_init.c
index 9c348042a724..4b1619584b23 100644
--- linux-libre-5.15-gnu/arch/arm/mm/kasan_init.c
+++ linux-libre-5.15.45-gnu/arch/arm/mm/kasan_init.c
@@ -226,7 +226,7 @@ void __init kasan_init(void)
 	BUILD_BUG_ON(pgd_index(KASAN_SHADOW_START) !=
 		     pgd_index(KASAN_SHADOW_END));
 	memcpy(tmp_pmd_table,
-	       pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
+	       (void*)pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
 	       sizeof(tmp_pmd_table));
 	set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)],
 		__pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
diff --git linux-libre-5.15-gnu/arch/arm/mm/mmu.c linux-libre-5.15.45-gnu/arch/arm/mm/mmu.c
index a4e006005107..5e2be37a198e 100644
--- linux-libre-5.15-gnu/arch/arm/mm/mmu.c
+++ linux-libre-5.15.45-gnu/arch/arm/mm/mmu.c
@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
@@ -390,9 +392,9 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START);
 	BUG_ON(idx >= __end_of_fixed_addresses);
 
-	/* we only support device mappings until pgprot_kernel has been set */
+	/* We support only device mappings before pgprot_kernel is set. */
 	if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
-		    pgprot_val(pgprot_kernel) == 0))
+		    pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
 		return;
 
 	if (pgprot_val(prot))
diff --git linux-libre-5.15-gnu/arch/arm/mm/proc-v7-bugs.c linux-libre-5.15.45-gnu/arch/arm/mm/proc-v7-bugs.c
index 114c05ab4dd9..fb9f3eb6bf48 100644
--- linux-libre-5.15-gnu/arch/arm/mm/proc-v7-bugs.c
+++ linux-libre-5.15.45-gnu/arch/arm/mm/proc-v7-bugs.c
@@ -6,8 +6,35 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/proc-fns.h>
+#include <asm/spectre.h>
 #include <asm/system_misc.h>
 
+#ifdef CONFIG_ARM_PSCI
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	switch ((int)res.a0) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+}
+#else
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn);
 
@@ -36,13 +63,61 @@ static void __maybe_unused call_hvc_arch_workaround_1(void)
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void cpu_v7_spectre_init(void)
+static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
 	const char *spectre_v2_method = NULL;
 	int cpu = smp_processor_id();
 
 	if (per_cpu(harden_branch_predictor_fn, cpu))
-		return;
+		return SPECTRE_MITIGATED;
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_bpiall;
+		spectre_v2_method = "BPIALL";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_iciallu;
+		spectre_v2_method = "ICIALLU";
+		break;
+
+	case SPECTRE_V2_METHOD_HVC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_hvc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
+		spectre_v2_method = "hypervisor";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_smc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_smc_switch_mm;
+		spectre_v2_method = "firmware";
+		break;
+	}
+
+	if (spectre_v2_method)
+		pr_info("CPU%u: Spectre v2: using %s workaround\n",
+			smp_processor_id(), spectre_v2_method);
+
+	return SPECTRE_MITIGATED;
+}
+#else
+static unsigned int spectre_v2_install_workaround(unsigned int method)
+{
+	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
+		smp_processor_id());
+
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
+static void cpu_v7_spectre_v2_init(void)
+{
+	unsigned int state, method = 0;
 
 	switch (read_cpuid_part()) {
 	case ARM_CPU_PART_CORTEX_A8:
@@ -51,69 +126,133 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_bpiall;
-		spectre_v2_method = "BPIALL";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
 		break;
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_iciallu;
-		spectre_v2_method = "ICIALLU";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_ICIALLU;
 		break;
 
-#ifdef CONFIG_ARM_PSCI
 	case ARM_CPU_PART_BRAHMA_B53:
 		/* Requires no workaround */
+		state = SPECTRE_UNAFFECTED;
 		break;
+
 	default:
 		/* Other ARM CPUs require no workaround */
-		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
+		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) {
+			state = SPECTRE_UNAFFECTED;
 			break;
+		}
+
 		fallthrough;
-		/* Cortex A57/A72 require firmware workaround */
-	case ARM_CPU_PART_CORTEX_A57:
-	case ARM_CPU_PART_CORTEX_A72: {
-		struct arm_smccc_res res;
 
-		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
-				     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if ((int)res.a0 != 0)
-			return;
+	/* Cortex A57/A72 require firmware workaround */
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = spectre_v2_get_cpu_fw_mitigation_state();
+		if (state != SPECTRE_MITIGATED)
+			break;
 
 		switch (arm_smccc_1_1_get_conduit()) {
 		case SMCCC_CONDUIT_HVC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_hvc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
-			spectre_v2_method = "hypervisor";
+			method = SPECTRE_V2_METHOD_HVC;
 			break;
 
 		case SMCCC_CONDUIT_SMC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_smc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
-			spectre_v2_method = "firmware";
+			method = SPECTRE_V2_METHOD_SMC;
 			break;
 
 		default:
+			state = SPECTRE_VULNERABLE;
 			break;
 		}
 	}
-#endif
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_v2_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+static int spectre_bhb_method;
+
+static const char *spectre_bhb_method_name(int method)
+{
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		return "loop";
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		return "BPIALL";
+
+	default:
+		return "unknown";
 	}
+}
 
-	if (spectre_v2_method)
-		pr_info("CPU%u: Spectre v2: using %s workaround\n",
-			smp_processor_id(), spectre_v2_method);
+static int spectre_bhb_install_workaround(int method)
+{
+	if (spectre_bhb_method != method) {
+		if (spectre_bhb_method) {
+			pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",
+			       smp_processor_id());
+
+			return SPECTRE_VULNERABLE;
+		}
+
+		if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE)
+			return SPECTRE_VULNERABLE;
+
+		spectre_bhb_method = method;
+	}
+
+	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
+		smp_processor_id(), spectre_bhb_method_name(method));
+
+	return SPECTRE_MITIGATED;
 }
 #else
-static void cpu_v7_spectre_init(void)
+static int spectre_bhb_install_workaround(int method)
 {
+	return SPECTRE_VULNERABLE;
 }
 #endif
 
+static void cpu_v7_spectre_bhb_init(void)
+{
+	unsigned int state, method = 0;
+
+	switch (read_cpuid_part()) {
+	case ARM_CPU_PART_CORTEX_A15:
+	case ARM_CPU_PART_BRAHMA_B15:
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_LOOP8;
+		break;
+
+	case ARM_CPU_PART_CORTEX_A73:
+	case ARM_CPU_PART_CORTEX_A75:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
+		break;
+
+	default:
+		state = SPECTRE_UNAFFECTED;
+		break;
+	}
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_bhb_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
 static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned,
 						  u32 mask, const char *msg)
 {
@@ -142,16 +281,18 @@ static bool check_spectre_auxcr(bool *warned, u32 bit)
 void cpu_v7_ca8_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
 
 void cpu_v7_bugs_init(void)
 {
-	cpu_v7_spectre_init();
+	cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
diff --git linux-libre-5.15-gnu/arch/arm/probes/kprobes/Makefile linux-libre-5.15.45-gnu/arch/arm/probes/kprobes/Makefile
index 14db56f49f0a..6159010dac4a 100644
--- linux-libre-5.15-gnu/arch/arm/probes/kprobes/Makefile
+++ linux-libre-5.15.45-gnu/arch/arm/probes/kprobes/Makefile
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
+KASAN_SANITIZE_actions-common.o := n
+KASAN_SANITIZE_actions-arm.o := n
+KASAN_SANITIZE_actions-thumb.o := n
 obj-$(CONFIG_KPROBES)		+= core.o actions-common.o checkers-common.o
 obj-$(CONFIG_ARM_KPROBES_TEST)	+= test-kprobes.o
 test-kprobes-objs		:= test-core.o
diff --git linux-libre-5.15-gnu/arch/arm64/Kconfig linux-libre-5.15.45-gnu/arch/arm64/Kconfig
index fee914c716aa..8b6f090e0364 100644
--- linux-libre-5.15-gnu/arch/arm64/Kconfig
+++ linux-libre-5.15.45-gnu/arch/arm64/Kconfig
@@ -154,7 +154,6 @@ config ARM64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
-	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -1053,9 +1052,6 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config ARCH_HAS_FILTER_PGPROT
-	def_bool y
-
 # Supported by clang >= 7.0
 config CC_HAVE_SHADOW_CALL_STACK
 	def_bool $(cc-option, -fsanitize=shadow-call-stack -ffixed-x18)
@@ -1184,6 +1180,15 @@ config UNMAP_KERNEL_AT_EL0
 
 	  If unsure, say Y.
 
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
 config RODATA_FULL_DEFAULT_ENABLED
 	bool "Apply r/o permissions of VM areas also to their linear aliases"
 	default y
@@ -1264,7 +1269,8 @@ config KUSER_HELPERS
 
 config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
-	depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
+	depends on !CPU_BIG_ENDIAN
+	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
 	select GENERIC_COMPAT_VDSO
 	default y
 	help
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index cc321c04f121..f6d7d7f7fdab 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -343,19 +343,19 @@
 	};
 
 	thermal-zones {
-		cpu-thermal-zone {
+		cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
 		};
 
-		ddr-thermal-zone {
+		ddr-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
 		};
 
-		gpu-thermal-zone {
+		gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
index 578c37490d90..e39db51eb448 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -4,7 +4,7 @@
  */
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
index b2657201957e..1afad8b437d7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -2,7 +2,7 @@
 // Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
 
 / {
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index d13980ed7a79..7ec5ac850a0d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -69,7 +69,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 578a63dedf46..9988e87ea7b3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -217,7 +217,7 @@
 			};
 		};
 
-		gpu_thermal {
+		gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
index 8c6e8536b69f..0baf0f8e4d27 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -3,7 +3,7 @@
 // Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
 
 / {
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "allwinner,sun50i-h6-operating-points";
 		nvmem-cells = <&cpu_speed_grade>;
 		opp-shared;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index d301ac0d406b..3ec301bd08a9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -594,7 +594,7 @@
 		};
 
 		qspi: spi@ff8d2000 {
-			compatible = "cdns,qspi-nor";
+			compatible =  "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff8d2000 0x100>,
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 00c6f53290d4..a3a1ea0f2134 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -58,7 +58,7 @@
 		secure-monitor = <&sm>;
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-124999998 {
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 81269ccc2496..4fb31c2ba31c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index a26bfe72550f..4b5d11e56364 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 579f3d02d613..b4e86196e346 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -139,7 +139,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index f42cf4b8af2d..16dd409051b4 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -18,7 +18,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -37,7 +37,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&vsys_3v3>;
+		pwm-supply = <&vsys_3v3>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 344573e157a7..d33e54b5e196 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -130,7 +130,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -149,7 +149,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -217,7 +217,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
@@ -607,7 +607,7 @@
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";
 
-	mx25u64: spi-flash@0 {
+	mx25u64: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 1e5d0ee5d541..44c23c984034 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -76,26 +56,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index feb088504740..b40d2c1002c9 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -96,7 +96,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -115,7 +115,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2c30a4..aa14ea017a61 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d..a4d34398da35 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -64,6 +65,7 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +163,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
 };
 
 &hdmi_tx_tmds_port {
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index effaa138b5f9..cadba194b149 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -173,7 +173,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -437,6 +437,7 @@
 		"",
 		"eMMC_RST#", /* BOOT_12 */
 		"eMMC_DS", /* BOOT_13 */
+		"", "",
 		/* GPIOC */
 		"SD_D0_B", /* GPIOC_0 */
 		"SD_D1_B", /* GPIOC_1 */
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index f2c098143594..9c0b544e2209 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -24,7 +24,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&vsys_3v3>;
+		pwm-supply = <&vsys_3v3>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index fd0ad85c165b..76ad052fbf0c 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -116,7 +116,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -263,6 +263,10 @@
 		reg = <0>;
 		max-speed = <1000>;
 
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
 		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 2194a778973f..a5d79f2f7c19 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -185,7 +185,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1500 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 3d8b1f4f2001..78bdbd2ccc9d 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -95,26 +95,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
index 6288e104a089..a2635b14da30 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -543,8 +543,7 @@
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		/* Standard AXI Translation entries as programmed by EDK2 */
-		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
-			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
 			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index a5a64d17d9ea..e8907d3fe2d1 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -273,9 +273,9 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0xff800000 0x3000>;
 
-		timer: timer@400 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x400 0x3c>;
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
 		};
 
 		gpio0: gpio-controller@500 {
@@ -292,7 +292,7 @@
 			reg = <0x640 0x18>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
-			clock-names = "periph";
+			clock-names = "refclk";
 			status = "okay";
 		};
 
@@ -326,12 +326,12 @@
 				#reset-cells = <1>;
 			};
 		};
+	};
 
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&twd>;
+		offset = <0x34>;
+		mask = <1>;
 	};
 };
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..8c218689fef7 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -687,7 +687,7 @@
 			};
 		};
 
-		sata: ahci@663f2000 {
+		sata: sata@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
 			dma-coherent;
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 79f155dedb2d..e662677a6e28 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -15,6 +15,7 @@
 	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
 
 	aliases {
+		serial0 = &duart0;
 		mmc0 = &esdhc0;
 		mmc1 = &esdhc1;
 	};
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index bfd14b64567e..2f92e62ecafe 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -272,11 +272,6 @@
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -318,6 +313,15 @@
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 01b01e320411..35d1939e690b 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -536,9 +536,9 @@
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			dmas = <&edma0 1 39>,
-			       <&edma0 1 38>;
-			dma-names = "tx", "rx";
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 687fea6d8afa..4e7bd04d9798 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -499,9 +499,9 @@
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
-			dmas = <&edma0 1 39>,
-			       <&edma0 1 38>;
-			dma-names = "tx", "rx";
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index 3063851c2fb9..d3f03dcbb8c3 100644
--- linux-libre-5.15-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ linux-libre-5.15.45-gnu/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -38,7 +38,6 @@
 		powerdn {
 			label = "External Power Down";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
 			linux,code = <KEY_POWER>;
 		};
 
@@ -46,7 +45,6 @@
 		admin {
 			label = "